LW640G (CE)

WHEEL LOADER

Cummins Engine
CE-certified
Small turning radius
Luxury cab- rops & fops

The LW640G is a single - bucket, front-end, articulation wheel loader. It is adaptive

to shovel or transfer such loose material as earth/ clay, sand/ gravel, aggregate
and rock, and carrying out such tasks as towing, ground leveling, stacking and
piling in building site, port, quay, station, yard and so on. So it is a multi-purpose
and efficient earth-moving machine.

Member of the Michielsens Group

 ++32 3 324 40 00 - 6++32 3 888 42 22 - ✉ trading@cranes4u.com

Bisschoppenhoflaan 275 - 2100 Deurne - Belgium (Europe)
RPR Antwerpen: 0471.732.279 - BTW: BE 471.732.279

www.cranes4u.com
 LW640G (CE)
LW640G (CE) ENGINE (STANDARD EQUIPMENT) MAIN SPECIFICATIONS
Model CUMMINS C8.3 Bucket type LW640G(CE)
Type 4-stroke, direct-injection, water cooled, Bucket capacity 3.5m3
exhaust turbo charger, air-to-air after cooled Rated load 6000kg
Raising time 6.5 s.
Rated power 179kW/240HP
Total cycling time 12 s.
Rated speed 2200r/min
Max.drawing force 165KN
Max. torque 1116N • m/1500rpm
Max.breakout force 198KN
Number of cylinders 6
Articulation angle 35°
Bore x stroke 114 X 135 mm/4.5” X 5.3”
Min.turn radius 6492mm
Displacement 8.3L/506 in 3
Climb ability 28°
Compression ratio 18:1
Wheel base 3400mm
Batteries 2 X 12V / 120 A • h
Tread 2200mm
Starter 24V 7.5 kW
Dumping clearance 3250mm
Alternator 24V 50A
Dumping reach 1268mm
LxWxH 8680x3050x3534mm
Operating weight 20.5t
TRANSMISSION Clamp type
Min.clamping diameter Ø600mm
Make and model ZF 4WG200 Dumping clearance 2934mm
Type Power-shift (electric hydraulic) countershaft Dumping reach 1741mm
design with four forward and LxWxH 8860x2830x3435mm
three reverse speeds Operating weight 21t
Control Single lever control
Forward speeds km/h (MPH)
1st 6.0 (3.7)
2nd 11.0 (6.8) DIMENSIONS
3rd 22.0 (13.6)
4th 35.0 (21.7) A B C D E
Reverse speeds km/h (MPH) LW640G(CE) 8680mm 5716mm 3400mm 3534mm 3250mm
1st 6.0 (3.7)
F G H I J
2nd 11.0 (6.8)
4366mm 307mm 2830mm 2200mm 3050mm
3rd 22.0 (13.6)

AXLE
Model ZF
CABINE
Driving system Four-wheel driving
Heating & cooling air-conditioner
Rear axle oscillation Center oscillation
Tinted safety glass, safety front windshield
Carrier assembly-Reduction ratio 5.167
FOPS and ROPS inside the driver’s cab
Wheel end reduction assembly-Redution ratio 4.777

BRAKES
Type Hydraulic wet multi disc brakes
Driving brake system pressure
Emergent and stopping system pressure
8 Mpa
>8.8 Mpa ANDERE FOTO
Electric control, clamp disc type,
Parking brake
Spring applied via a switch

TYRES

Specification 23.5-R25 Michelin

Specifications for working hydraulic system
Working pump (gear)
Max. flow rate 100ml/r
Max. working pressure 18.5Mpa
Control Pilot, double lever
Double-acting hydraulic cylinders Bore X stroke
Loader arm 160mm(6.3") x 869mm(34.2")
Bucket 200mm(7.87") x 593mm(23.35")
Operating time
Lift 6.5sec
Lower 4.0sec
Dump 1.5sec
Specifications for steering hydraulic system
Articulation, fully hydraulic power steering
Type
with flow- amplified system
Steering pump (gear)
Max. flow rate 80ml/r
Max. working pressure 16Mpa
Cylinder
Bore X stroke 90 x 420mm
Copyright Michielsens Trading

Max. steering angle ±35°

SERVICE REFILL CAPACITIES

Fuel tank 250 liters
Engine oil 27.5 liters
cooling system 45 liters
Transmission 34 liters
Hydraulic tank 180 liters
Axle 78 liters(front) / 53 liters(rear)