NPR025 Bladder Tank Internal Bladder Rev A

INTERNAL BLADDER
For
Bladder Tank Proportioning Systems
NPR025
UL162 Approved, High Tensile Pressure Formed Seams

Compatible with All Foam Concentrates
Assembled Via Seam Fusion Process without Adhesives
Custom Sizes Available
Description Features Technical Specifications

The National Foam Bladder is an • Compatible with all foam The National Foam internal bladder is
integral component of the Balanced concentrates constructed of proprietary elastomeric
Pressure Bladder Tank Proportioning • UL Approved material with excellent strength and
System, which requires no external • Homogeneous thermo plastic superior chemical resistance. The
power other than an adequate water construction flexible, fully vulcanized thermoplastic
supply. The internal bladder provides elastomer blend has no plasticizers or
a physical barrier which prevents the • No wicking or delamination of fabric phthalates to leach out. All seams are
foam concentrate from coming into reinforcement assembled without adhesives using a
contact with the water held inside • Single piece injection molded thermal bonding process, leaving no
of the tank shell, both in a static anchoring nozzles weak points and/or gaps filled with
ready state and during actuation, adhesive in the bladder construction.
whereby water pressure squeezes Standard nozzle sizes are of single piece
the bladder externally pushing the injection molded construction. All
foam concentrate contained within National Foam internal bladders are UL
the bladder into the foam system’s approved for use with National Foam
foam/water proportioning device. concentrates.
The bladder protects and preserves
MOLDED SEAM ANCHORING
the foam concentrate from the effects
NOZZLE
of evaporation and deterioration,
eliminating the need for seal oil as
sealing barrier between the foam
TANK SHELL
concentrate and air. The bladder is
supplied with injection molded single
piece anchoring nozzles offering
optimal size, shape and fit
ANCHORING MOLDED NOZZLE

TANK SHELL NOZZLE
INTERNAL
BLADDER
INTERNAL
BLADDER
ANCHORING
ANCHORING NOZZLE
NOZZLE
TYPICAL HORIZONTAL INSTALLATION TYPICAL VERTICAL INSTALLATION
(Shown Empty) (Shown Empty)
08/21 NPR025 (Rev A) Page 1 of 2
REPLACEMENT BLADDER ORDERING FORM
Gallon Tank _______________ Horizontal Tank ___________ Vertical Tank _____________

Please provide the following information so that we can quote you the correct replacement bladder:
_____________________ Tank Assembly Manufacturer ____________________ Tank Shell NBR Number
_____________________ Tank Assembly Part Number ____________________ Tank Shell Manufacturer
_____________________ Tank Assembly Serial Number ____________________ Tank Shell Serial Number
Provide Measurements of Tank or Bladder as Follows:
Flange #1 ‫ފ‬+‫ފ‬
TYPICAL 2
PLACES ‫ފ'ފ‬
Flange
Flange #1
Flange
#2 #4
‫ފ'ފ‬
Flange
‫ފ‬+‫ފ‬ #3
TYPICAL ‫ފ‬$‫ފ‬
‫ފ‬%‫ފ‬
4 PLACES
‫ފ‬$‫ފ‬
+RUL]RQWDO%ODGGHU7DQN
Measurement “A” (Head to Head) ”

Measurement “D” (Diameter) ”
Flange #2
Measurement “H” Ends (Head to Flange Face) ”
Vertical Bladder Tank
Measurement “H” Top & Bottom (Head to Flange Face) ”
Flange Orientation
(Check One for Each)
Flange Size Straddled Aligned
Flange #1 ”
Flange #2 ” Straddled Aligned
Bolt Holes Not in Bolt Holes
Flange #3 ” Alignment with Aligned with
Flange #4 ” Centerline Centerline
Flange Size Information

4” 6” 8” 10”
9” O.D. 11” O.D. 13-1/2” O.D. 16” O.D.
7 1/2” Bolt Circle 9 1/2” Bolt Circle 11-3/4” Bolt Circle 14 1/4” Bolt Circle
Page 2 of 2 08/21 NPR025 (Rev A)
National Foam National Foam operates a continuous program of product development. The
350 East Union Street, West Chester, PA 19382, USA right is therefore reserved to modify any specification without prior notice
and National Foam should be contacted to ensure that the current issues of all
24hr RED ALERT® : 610-363-1400 • Fax: 610-431-7084 technical data sheets are used.
www.nationalfoam.com © National Foam

NPR025 Bladder Tank Internal Bladder Rev A

Uploaded by

Copyright:

Available Formats

NPR025 Bladder Tank Internal Bladder Rev A

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

NPR025 Bladder Tank Internal Bladder Rev A

Uploaded by

Copyright:

Available Formats

INTERNAL BLADDER

UL162 Approved, High Tensile Pressure Formed Seams

Description Features Technical Specifications

ANCHORING MOLDED NOZZLE

Gallon Tank _________ Horizontal Tank _ Vertical Tank _________

Provide Measurements of Tank or Bladder as Follows:

Measurement “A” (Head to Head) ”

Flange Size Information

Page 2 of 2 08/21 NPR025 (Rev A)

You might also like