2
2
37 IS:11555(Part21-1986
(Reaffirmed 2003)
Indian Standard
Is]
1 I
I DESIGNER’S
PART 2 COLUMN
DATA SHEET
INTERNAL
I Scope- Covers the technical data to be supplied by the designer of the distillation colur
ternals to the fabricator for the fabrication of the distillation column as per the design,
1. Client/purchaser
2. Project
3. Column No.
4. Service
INPUT DATA
5. Tower diameter mm
6. Tray spacing mm
8. Operating temperature K
9. Design temperature K
14. Vapour
Flow rate kg/h
Density kg/m3
Molecular weight
Temperature K
Compressibility factor
15. Liquid
Flow rate kg/h
Density kg/m3
Viscosity cP/cST
Surface tension Dynes/cm
Molecular weight
Temperature K
Heat duty ( if it is heat transfer section)
--
-( Continued 1
FOAMING CHARACTERISTICS
Cap
Packings
OUTPUT DATA
Tray spacing mm
21 .I .I Material of construction
a) Bubble cap and riser
Gaskets, bolts, nuts and washers
b) Trays deck
Gaskets, bolting, clamping, tray supports, downcomers and seal pan
Spray
Nozzles
22. Attachments
a) Liquid draw off box design
b) Chimney tray design
c) Vapour return nozzle design
d) Transaction arrangements
3
IS : 11555 ( Part 2 ) - 1986
EXPLANATORY NOTE
This data sheet will enable the fabricator to fabricate the internals of the column as per the
design of the designer.
This Indian Standard is being issued in two parts, Part 1 covers mechanical design of columns
and Part 2 column internals.
4
Printed at Swatantra Bherat Press, Delhi. India