AX MIB Ref v261 GR1 P6 20130213 PDF
AX MIB Ref v261 GR1 P6 20130213 PDF
AX MIB Ref v261 GR1 P6 20130213 PDF
Information Base Reference
Trademarks
A10 Networks, the A10 logo, aACI, aCloud, ACOS, aDCS, aDNS, aELB, aFleX, aFlow, aGalaxy, aPlatform, aUSG, aVCS,
aWAF, aXAPI, IDAccess, IDSENTRIE, IP to ID, SmartFlow, SoftAX, Unified Service Gateway, Virtual Chassis, Virtual-
ADC, and VirtualN are trademarks or registered trademarks of A10 Networks, Inc. All other trademarks are property of
their respective owners.
Patents Protection
A10 Networks products including all AX Series products are protected by one or more of the following US patents and pat-
ents pending: 8291487, 8266235, 8151322, 8079077, 7979585, 7716378, 7675854, 7647635, 7552126, 20120216266,
20120204236, 20120179770, 20120144015, 20120084419, 20110239289, 20110093522, 20100235880, 20100217819,
20090049537, 20080229418, 20080148357, 20080109887, 20080040789, 20070283429, 20070282855, 20070271598,
20070195792, 20070180101
Confidentiality
This document contains confidential materials proprietary to A10 Networks, Inc. This document and information and ideas
herein may not be disclosed, copied, reproduced or distributed to anyone outside A10 Networks, Inc. without prior written
consent of A10 Networks, Inc. This information may contain forward looking statements and therefore is subject to change.
Disclaimer
The information presented in this document describes the specific products noted and does not imply nor grant a guarantee
of any technical performance nor does it provide cause for any eventual claims resulting from the use or misuse of the prod-
ucts described herein or errors and/or omissions. A10 Networks, Inc. reserves the right to make technical and other changes
to their products and documents at any time and without prior notification.
No warranty is expressed or implied; including and not limited to warranties of non-infringement, regarding programs, cir-
cuitry, descriptions and illustrations herein.
Environmental Considerations
Some electronic components may possibly contain dangerous substances. For information on specific component types,
please contact the manufacturer of that component. Always consult local authorities for regulations regarding proper dis-
posal of electronic components in your area.
Further Information
For additional information about A10 products, terms and conditions of delivery, and pricing, contact your nearest A10
Networks location, which can be found by visiting www.a10networks.com.
AX Series - MIB Reference
End User License Agreement
The following terms of this End User License Agreement ("Agreement") govern Cus-
tomer's access and use of the Software, except to the extent there is a separate
signed agreement between Customer and A10 Networks governing Customer's use
of the Software
License. Conditioned upon compliance with the terms and conditions of this Agree-
ment, A10 Networks Inc. or its subsidiary licensing the Software instead of A10 Net-
works Inc. ("A10 Networks"), grants to Customer a nonexclusive and
nontransferable license to use for Customer's business purposes the Software and
the Documentation for which Customer has paid all required fees. "Documentation"
means written information (whether contained in user or technical manuals, training
materials, specifications or otherwise) specifically pertaining to the product or prod-
ucts and made available by A10 Networks in any manner (including on CD-Rom, or
on-line).
Unless otherwise expressly provided in the Documentation, Customer shall use the
Software solely as embedded in or for execution on A10 Networks equipment owned
or leased by Customer and used for Customer's business purposes.
General Limitations. This is a license, not a transfer of title, to the Software and
Documentation, and A10 Networks retains ownership of all copies of the Software
and Documentation. Customer acknowledges that the Software and Documentation
contain trade secrets of A10 Networks, its suppliers or licensors, including but not
limited to the specific internal design and structure of individual programs and asso-
ciated interface information. Accordingly, except as otherwise expressly provided
under this Agreement, Customer shall have no right, and Customer specifically
agrees not to:
a. transfer, assign or sublicense its license rights to any other person or entity,
or use the Software on unauthorized or secondhand A10 Networks equip-
ment
b. make error corrections to or otherwise modify or adapt the Software or cre-
ate derivative works based upon the Software, or permit third parties to do
the same
Term and Termination. This Agreement and the license granted herein shall remain
effective until terminated. All confidentiality obligations of Customer and all limita-
tions of liability and disclaimers and restrictions of warranty shall survive termination
of this Agreement.
Trademarks
A10 Networks, the A10 logo, aACI, aCloud, ACOS, aDCS, aDNS, aELB, aFleX, aFlow, aGalaxy,
aPlatform, aUSG, aVCS, aWAF, aXAPI, IDAccess, IDSENTRIE, IP to ID, SmartFlow, SoftAX,
Unified Service Gateway, Virtual Chassis, VirtualADC, and VirtualN are trademarks or registered
trademarks of A10 Networks, Inc. All other trademarks are property of their respective owners.
Patents Protection
A10 Networks products including all AX Series products are protected by one or more of the fol-
lowing US patents and patents pending: 8291487, 8266235, 8151322, 8079077, 7979585,
7716378, 7675854, 7647635, 7552126, 20120216266, 20120204236, 20120179770,
20120144015, 20120084419, 20110239289, 20110093522, 20100235880, 20100217819,
20090049537, 20080229418, 20080148357, 20080109887, 20080040789, 20070283429,
20070282855, 20070271598, 20070195792, 20070180101
Customer agrees that the limitations of liability and disclaimers set forth herein will
apply regardless of whetherCustomer has accepted the Software or any other prod-
uct or service delivered by A10 Networks. Customer acknowledges and agrees that
A10 Networks has set its prices and entered into this Agreement in reliance upon the
disclaimers of warranty and the limitations of liability set forth herein, that the same
reflect an allocation of risk between the parties (including the risk that a contract
remedy may fail of its essential purpose and cause consequential loss), and that the
same form an essential basis of the bargain between the parties.
The Warranty and the End User License shall be governed by and construed in
accordance with the laws of the State of California, without reference to or applica-
tion of choice of law rules or principles. If any portion hereof is found to be void or
unenforceable, the remaining provisions of the Agreement shall remain in full force
and effect. This Agreement constitutes the entire and sole agreement between the
parties with respect to the license of the use of A10 Networks Products unless other-
wise supersedes by a written signed agreement.
http://www.a10networks.com/adc/
Audience
This document is for network architects for determining applicability and
planning implementation, and for system administrators for provisioning
and maintenance of A10 Networks AX Series devices.
Introduction 19
MIB Access............................................................................................................................................ 19
SNMP RFCs Supported ........................................................................................................................ 19
AX MIB Files.......................................................................................................................................... 21
Introduction
MIB Access
SNMP access to the AX device is read-only. You can use SNMP managers
to retrieve information using GET or GET NEXT requests. SET requests
are not supported.
AX MIB Files
The AX MIB consists of the following files:
• A10-COMMON-MIB.txt – Contains common MIB definitions for
A10 Networks, including the A10 enterprise object identifier (OID) and
the OIDs for all A10 products.
• A10-AX-MIB.txt – AX device MIB definitions, including the AX
SNMP notification node.
• A10-AX-NOTIFICATIONS-V2C.txt – SNMPv2c trap definitions for
the AX device.
• A10-AX-TRAPS-V1.txt – SNMPv1 trap definitions for the AX device.
The first two files are required. Depending on your SNMP version (v1 or
v2c), use one or the other of the last two files.
• If you are using an SNMPv2c manager, use the following MIB files:
• A10-COMMON-MIB.txt
• A10-AX-MIB.txt
• A10-AX-NOTIFICATIONS-V2C.txt
• If you are using an SNMPv1 manager, use the following MIB files:
• A10-COMMON-MIB.txt
• A10-AX-MIB.txt
• A10-AX-TRAPS-V1.txt
axLogBufferSize
Description Get the size of the local log buffer. The size indicates the maximum number
of messages the buffer can hold.
OID .1.3.6.1.4.1.22610.2.4.2.1
Example
axLogBufferSize.0:-->30000
axLogBufferPri
Description Get the logging priority for the local log buffer. Log messages with severity
levels at or above the priority are sent to the local log buffer. Log messages
with severity levels lower than the priority are not sent to the local log
buffer.
OID .1.3.6.1.4.1.22610.2.4.2.2
• 1 – Alert
• 2 – Critical
• 3 – Error
• 4 – Warning
• 5 – Notice
• 6 – Info
• 7 – Debug
• -1 – NotDefined (disabled)
Example
axLogBufferPri.0:-->Debug(7)
axLogConsolePri
Description Get the logging priority for log messages displayed in console sessions. Log
messages with severity levels at or above the priority are displayed. Log
messages with severity levels lower than the priority are not displayed.
OID .1.3.6.1.4.1.22610.2.4.2.3
• 1 – Alert
• 2 – Critical
• 3 – Error
• 4 – Warning
• 5 – Notice
• 6 – Info
• 7 – Debug
• -1 – NotDefined (disabled)
Example
axLogConsolePri.0:-->Error(3)
axLogEmailPri
Description Get the logging priority for emailed log messages. Log messages with
severity levels at or above the priority are sent by email. Log messages with
severity levels lower than the priority are not sent by email.
OID .1.3.6.1.4.1.22610.2.4.2.4
• 1 – Alert
• 2 – Critical
• 3 – Error
• 4 – Warning
• 5 – Notice
• 7 – Debug
• -1 – NotDefined (disabled)
Example
axLogEmailPri.0:-->Critical(2)
axLogEmailAddr
Description Get the email address(es) to which log messages can be sent.
OID .1.3.6.1.4.1.22610.2.4.2.5
Example
axLogEmailAddr.0:-->admin@example.com
axLogSyslogPri
Description Get the logging priority for log messages sent to external log servers. Log
messages with severity levels at or above the priority are sent to external log
servers. Log messages with severity levels lower than the priority are not to
sent to external log servers.
OID .1.3.6.1.4.1.22610.2.4.2.8
• 1 – Alert
• 2 – Critical
• 3 – Error
• 4 – Warning
• 5 – Notice
• 6 – Info
• 7 – Debug
• -1 – NotDefined (disabled)
Example
axLogSyslogPri.0:-->Debug(7)
axLogSyslogHostTable
Description Get the syslog host table, which contains the external syslog servers.
OID .1.3.6.1.4.1.22610.2.4.2.9
Example
axLogSyslogHost.1:-->1.0.6.134
axLogSyslogHost.2:-->AXLogHostForTest
axLogSyslogPort
Description Get the protocol port number to which the AX device sends log messages
on external syslog servers.
OID .1.3.6.1.4.1.22610.2.4.2.10
Example
axLogSyslogPort.0:-->514
axLogMonitorPri
Description Get the logging priority for log messages displayed in Telnet or SSH ses-
sions. Log messages with severity levels at or above the priority are dis-
played. Log messages with severity levels lower than the priority are not
displayed.
OID .1.3.6.1.4.1.22610.2.4.2.11
• 1 – Alert
• 2 – Critical
• 4 – Warning
• 5 – Notice
• 6 – Info
• 7 – Debug
• -1 – NotDefined (disabled)
Example
axLogMonitorPri.0:-->7
axSyslogTrap
OID .1.3.6.1.4.1.22610.2.4.2.100.1
axSyslogModuleName
OID .1.3.6.1.4.1.22610.2.4.2.101.1
axSyslogPriority
Description Syslog message priority.
OID .1.3.6.1.4.1.22610.2.4.2.101.2
• 1 – Alert
• 2 – Critical
• 3 – Error
• 4 – Warning
• 5 – Notice
• 6 – Info
• 7 – Debug
axSyslogMsg
OID .1.3.6.1.4.1.22610.2.4.2.101.3
axSysVersion Objects
axSysPrimaryVersionOnDisk
Description Get the version of the image stored in the primary image area of the hard
disk.
OID .1.3.6.1.4.1.22610.2.4.1.1.1
Example
axSysPrimaryVersionOnDisk.0:-->2.0.0(build: 110)
axSysSecondaryVersionOnDisk
Description Get the version of the image stored in the secondary image area of the hard
disk.
OID .1.3.6.1.4.1.22610.2.4.1.1.2
Example
axSysSecondaryVersionOnDisk.0:-->2.0.0(build: 107)
axSysPrimaryVersionOnCF
Description Get the version of the image stored in the primary image area of the com-
pact flash.
OID .1.3.6.1.4.1.22610.2.4.1.1.3
Example
axSysPrimaryVersionOnCF.0:-->2.0.0(build: 107)
axSysSecondaryVersionOnCF
Description Get the version of the image stored in the secondary image area of the com-
pact flash.
OID .1.3.6.1.4.1.22610.2.4.1.1.4
Example
axSysSecondaryVersionOnCF.0:-->1.2.2(build: 100)
axSysMemory Objects
axSysMemoryTotal
Description Get the total amount of memory on the system. Memory is measured in Kil-
obytes (Kb).
OID .1.3.6.1.4.1.22610.2.4.1.2.1
Example
axSysMemoryTotal.0:-->2072432
axSysMemoryUsage
Description Get the amount of memory that is currently in use. Memory is measured in
Kb.
OID .1.3.6.1.4.1.22610.2.4.1.2.2
Example
axSysMemoryUsage.0:-->1176400
axSysCpu Objects
axSysCpuNumber
OID .1.3.6.1.4.1.22610.2.4.1.3.1
Example
axSysCpuNumber.0:-->3
axSysCpuTable
Description Get the CPU table, which contains usage information for each CPU.
OID .1.3.6.1.4.1.22610.2.4.1.3.2
Example
SNMPv2-SMI::enterprises.22610.2.4.1.3.1.0 = INTEGER: 4
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.2.1 = STRING: "0"
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.2.2 = STRING: "0"
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.2.3 = STRING: "1"
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.2.4 = STRING: "0"
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.3.1 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.3.2 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.3.3 = INTEGER: 1
SNMPv2-SMI::enterprises.22610.2.4.1.3.2.1.3.4 = INTEGER: 0
axSysAverageCpuUsage
Description Gets the average CPU utilization over the last 5 seconds.
OID .1.3.6.1.4.1.22610.2.4.1.3.3
axSysAverageControlCpuUsage
Description Gets the average control CPU utilization over the last 5 seconds.
OID .1.3.6.1.4.1.22610.2.4.1.3.4
axSysAverageDataCpuUsage
Description Gets the average data CPU utilization over the last 5 seconds.
OID .1.3.6.1.4.1.22610.2.4.1.3.5
axSysCpuUsageTable
Description Get the CPU usage table, which contains usage information for each CPU
over the following time intervals:
• Previous 1 second
• Previous 5 seconds
• Previous 10 seconds
• Previous 30 seconds
• Previous 60 seconds
OID .1.3.6.1.4.1.22610.2.4.1.3.6
Example
#snmpwalk -v 2c -c public 192.168.1.239 .1.3.6.1.4.1.22610.2.4.1.3.6.1.3
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.0.1 = INTEGER: 4
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.0.2 = INTEGER: 8
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.0.3 = INTEGER: 5
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.0.4 = INTEGER: 4
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.0.5 = INTEGER: 1
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.1.1 = INTEGER: 1
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.1.2 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.1.3 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.1.4 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.1.5 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.2.1 = INTEGER: 1
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.2.2 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.2.3 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.2.4 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.2.5 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.3.1 = INTEGER: 1
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.3.2 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.3.3 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.3.4 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.1.3.6.1.3.3.5 = INTEGER: 0
axSysCpuUsagePerPartitionTable
In the GET request, specify one of the following values for the partition
name (axSysCpuUsagePartitionName):
• ?overall? – Returns statistics that include all partitions on the AX
device. (You must include the question marks.)
• shared – Returns statistics only for the shared partition.
OID .1.3.6.1.4.1.22610.2.4.1.3.7
axSysDisk Objects
axSysDiskTotalSpace
Description Get the total amount of space on the AX hard disk. The space is measured in
Megabytes (MB).
OID .1.3.6.1.4.1.22610.2.4.1.4.1
Example
axSysDiskTotalSpace.0:-->76801
axSysDiskFreeSpace
Description Get the amount of hard disk space that is currently free (unused). The space
is measured in MB.
OID .1.3.6.1.4.1.22610.2.4.1.4.2
Example
axSysDiskFreeSpace.0:-->73867
axSysHwInfo Objects
axSysHwPhySystemTemp
Description Get the current temperature of the device. The temperature is measured in
degrees Celsius.
OID .1.3.6.1.4.1.22610.2.4.1.5.1
Example
axSysHwPhySystemTemp.0:-->50
axSysHwFan1Speed
Description Get the current speed of fan number 1. The speed is measured in rotations
per minute (RPMs).
Note: This object applies only to the following models: AX 1000, AX 2000,
AX 2100, AX 2200, AX 3100, AX 3200, AX 3200-12, and AX 3400. For
other models, see “axSysFanStatusTable” on page 37.
OID .1.3.6.1.4.1.22610.2.4.1.5.2
Example
axSysHwFan1Speed.0:-->2596
axSysHwFan2Speed
Description Get the current speed of fan number 2. The speed is measured in RPMs.
Note: This object applies only to the following models: AX 1000, AX 2000,
AX 2100, AX 2200, AX 3100, AX 3200, AX 3200-12, and AX 3400. For
other models, see “axSysFanStatusTable” on page 37.
OID .1.3.6.1.4.1.22610.2.4.1.5.3
Example
axSysHwFan2Speed.0:-->2518
axSysHwFan3Speed
Description Get the current speed of fan number 3. The speed is measured in RPMs.
Note: This object applies only to the following models: AX 1000, AX 2000,
AX 2100, AX 2200, AX 3100, AX 3200, AX 3200-12, and AX 3400. For
other models, see “axSysFanStatusTable” on page 37.
OID .1.3.6.1.4.1.22610.2.4.1.5.4
Example
axSysHwFan3Speed.0:-->2518
Note: This object applies only to the following models: AX 1000, AX 2000,
AX 2100, AX 2200, AX 3100, AX 3200, AX 3200-12, and AX 3400. For
other models, see “axSystemPowerSupplyFailure” on page 136.
OID .1.3.6.1.4.1.22610.2.4.1.5.7
• 1 – On
• -1 – Unknown
Example
axSysLowerPowerSupplyStatus.0:-->on(1)
axSysUpperOrRightPowerSupplyStatus
Note: This object applies only to the following models: AX 1000, AX 2000,
AX 2100, AX 2200, AX 3100, AX 3200, AX 3200-12, and AX 3400. For
other models, see “axSystemPowerSupplyFailure” on page 136.
OID .1.3.6.1.4.1.22610.2.4.1.5.8
• 1 – On
• -1 – Unknown
Example
axSysUpperPowerSupplyStatus.0:-->on(1)
axSysFanStatusTable
Note: This table applies only to the following models: AX 2200, AX 2200-11,
AX 3100, AX 3200, AX 3200-11, AX 5100, AX 5200, and AX 5200-11.
OID .1.3.6.1.4.1.22610.2.4.1.5.9
axPowerSupplyVoltageTotal
Description Get the total number of power supplies in the chassis.
OID .1.3.6.1.4.1.22610.2.4.1.5.10
axPowerSupplyVoltageTable
OID .1.3.6.1.4.1.22610.2.4.1.5.11
axSysInfo Objects
axSysStartupMode
Description Get the startup mode configured on the AX device. The startup mode speci-
fies the image location from which the AX device will attempt to boot. The
image location includes the physical medium (hard disk or compact flash)
and the image area (primary or secondary).
OID .1.3.6.1.4.1.22610.2.4.1.6.1
• 0 – Unknown
Example
axSysStartupMode.0:-->PrimaryDisk(1)
axSysSerialNumber
OID .1.3.6.1.4.1.22610.2.4.1.6.2
Example
axSysSerialNumber.0:-->AX20231101234567
axSysFirmwareVersion
OID .1.3.6.1.4.1.22610.2.4.1.6.3
Note: Model AX 2000 does not have a firmware version. On this model, the
value is always “N/A”.
Example
axSysFirmwareVersion.0:-->7.5
axSysAFleXEngineVersion
OID .1.3.6.1.4.1.22610.2.4.1.6.4
Example
axSysAFleXEngineVersion.0:-->1.1.0
axNetwork Objects
axInterfaces Objects
axInterfaceTable
OID .1.3.6.1.4.1.22610.2.4.1.7.1.1.2
axInterfaceStatTable
OID .1.3.6.1.4.1.22610.2.4.1.7.1.2.1
axVlans Objects
axVlanCfgTable
OID .1.3.6.1.4.1.22610.2.4.1.7.2.1.1
axVlanCfgMemberTable
Description Get the VLAN member table.
OID .1.3.6.1.4.1.22610.2.4.1.7.2.1.2
axTrunk Objects
axTrunkTotal
OID .1.3.6.1.4.1.22610.2.4.1.7.3.1.1
axTrunkTable
OID .1.3.6.1.4.1.22610.2.4.1.7.3.1.2
axTrunkStatTotal
Description Get the total number of entries in the trunk statistics table (axTrunkStatTa-
ble).
OID .1.3.6.1.4.1.22610.2.4.1.7.3.2.1
axTrunkStatTable
OID .1.3.6.1.4.1.22610.2.4.1.7.3.2.2
axTrunkCfgMemberTotal
OID .1.3.6.1.4.1.22610.2.4.1.7.3.3.1
OID .1.3.6.1.4.1.22610.2.4.1.7.3.3.2
This chapter describes the MIB objects in the axApp group. This group
shows Server Load Balancing (SLB) objects.
axAppGlobals Objects
axAppGlobalSystemResourceUsageTable
Description Get the global system resource usage table. This table lists the minimum
and maximum numbers of each type of system resource that can be config-
ured or used, the default maximum number allowed by the configuration,
and the number currently in use.
OID .1.3.6.1.4.1.22610.2.4.3.1.1.1
axAppGlobalTotalCurrentConnections
OID .1.3.6.1.4.1.22610.2.4.3.1.2.1
axAppGlobalTotalNewConnections
OID .1.3.6.1.4.1.22610.2.4.3.1.2.2
Example
SNMPv2-SMI::enterprises.22610.2.4.3.1.2.2.0 = Counter64: 8817
axAppGlobalTotalNewL4Connections
OID .1.3.6.1.4.1.22610.2.4.3.1.2.3
Example
SNMPv2-SMI::enterprises.22610.2.4.3.1.2.3.0 = Counter64: 4433
axAppGlobalTotalNewL7Connections
OID .1.3.6.1.4.1.22610.2.4.3.1.2.4
Example
<SNMPv2-SMI::enterprises.22610.2.4.3.1.2.4.0 = Counter64: 3388
axAppGlobalTotalNewIPNatConnections
Description Get the total number of new IP source Network Address Translation (NAT)
connections.
OID .1.3.6.1.4.1.22610.2.4.3.1.2.5
Example
SNMPv2-SMI::enterprises.22610.2.4.3.1.2.5.0 = Counter64: 2
OID .1.3.6.1.4.1.22610.2.4.3.1.2.6
Example
SNMPv2-SMI::enterprises.22610.2.4.3.1.2.6.0 = Counter64: 770
axAppGlobalTotalL7Requests
OID .1.3.6.1.4.1.22610.2.4.3.1.2.7
Example
SNMPv2-SMI::enterprises.22610.2.4.3.1.2.7.0 = Counter64: 9229431
axGlobalAppPacketDrop
Description Get the total number of dropped packets (buffer drops) during the most
recent 10-second polling interval.
OID .1.3.6.1.4.1.22610.2.4.3.1.2.8
axGlobalTotalAppPacketDrop
Description Get the total number of dropped packets (buffer drops) since the last time
this statistics counter was cleared.
OID .1.3.6.1.4.1.22610.2.4.3.1.2.9
axGlobalTotalL4Session
OID .1.3.6.1.4.1.22610.2.4.3.1.2.10
axAppGlobalTotalCurrentConnectionsInteger
OID .1.3.6.1.4.1.22610.2.4.3.1.2.11
axServers Objects
axServerCount
Description Get the total number of real servers in the SLB server table (axServerTable).
OID .1.3.6.1.4.1.22610.2.4.3.2.1.1
Example
axServerCount.0:-->30
axServerTable
OID .1.3.6.1.4.1.22610.2.4.3.2.1.2
axServerStatCount
Description Get the total number of real servers in the real server statistics table
(axServerStatTable).
OID .1.3.6.1.4.1.22610.2.4.3.2.2.1
Example
axServerStatCount.0:-->30
axServerStatTable
OID .1.3.6.1.4.1.22610.2.4.3.2.2.2
axServerPortTable
OID .1.3.6.1.4.1.22610.2.4.3.2.3.1
axServerPortStatTable
Description Get the real server port statistics table.
OID .1.3.6.1.4.1.22610.2.4.3.2.4.1
axServiceGroups Objects
axServiceGroupCount
Description Get the number of service groups in the service group table (axService-
GroupTable).
OID .1.3.6.1.4.1.22610.2.4.3.3.1.1
Example
axServiceGroupCount.0:-->6
OID .1.3.6.1.4.1.22610.2.4.3.3.1.2
axServiceGroupStatTable
Description Get the service group statistics table. This table shows statistics for service
groups.
OID .1.3.6.1.4.1.22610.2.4.3.3.2.1
axServiceGroupMemberTable
OID .1.3.6.1.4.1.22610.2.4.3.3.3.1
axServiceGroupMemberStatTable
OID .1.3.6.1.4.1.22610.2.4.3.3.4.1
axVirtualServers Objects
axVirtualServerCount
Description Get the number of virtual servers in the virtual server table (axVirtual-
ServerTable).
OID .1.3.6.1.4.1.22610.2.4.3.4.1.1
Example
axVirtualServerCount.0:-->3
axVirtualServerTable
OID .1.3.6.1.4.1.22610.2.4.3.4.1.2
axVirtualServerStatTable
Description Get the virtual server statistics table.
OID .1.3.6.1.4.1.22610.2.4.3.4.2.1
axVirtualServerPortTable
OID .1.3.6.1.4.1.22610.2.4.3.4.3.1
axVirtualServerPortStatTable
OID .1.3.6.1.4.1.22610.2.4.3.4.4.1
axVirtualServerNameStatTable
OID .1.3.6.1.4.1.22610.2.4.3.4.5.1
axVirtualServerNamePortStatTable
OID .1.3.6.1.4.1.22610.2.4.3.4.6.1
axConnReuseStats Objects
axConnReuseStatTotalOpenPersist
OID .1.3.6.1.4.1.22610.2.4.3.5.1
Example
axConnReuseStatTotalOpenPersist.0:-->135
axConnReuseStatTotalActivePersist
Description Get the total count of active persistent connection-reuse sessions.
OID .1.3.6.1.4.1.22610.2.4.3.5.2
Example
axConnReuseStatTotalActivePersist.0:-->1038
axConnReuseStatTotalEstablished
Description Get the total count of established connection-reuse sessions.
OID .1.3.6.1.4.1.22610.2.4.3.5.3
Example
axConnReuseStatTotalEstablished.0:-->458
axConnReuseStatTotalTerminated
OID .1.3.6.1.4.1.22610.2.4.3.5.4
Example
axConnReuseStatTotalTerminated.0:-->2
OID .1.3.6.1.4.1.22610.2.4.3.5.5
Example
axConnReuseStatTotalBound.0:-->21
axConnReuseStatTotalUNBound
OID .1.3.6.1.4.1.22610.2.4.3.5.6
Example
axConnReuseStatTotalUNBound.0:-->422
axConnReuseStatTable
OID .1.3.6.1.4.1.22610.2.4.3.5.7
axConnReuseStatTotalDelayedUNBound
Description Get the total number of connections whose unbinding was delayed.
OID .1.3.6.1.4.1.22610.2.4.3.5.8
axConnReuseStatTotalLongResponse
Description Get the total number of responses that took too long.
OID .1.3.6.1.4.1.22610.2.4.3.5.9
axConnReuseStatTotalMissedRes
Description Get the total number of missed responses to HTTP requests.
OID .1.3.6.1.4.1.22610.2.4.3.5.7.1.10
axFastHttpProxyStats Objects
axFastHttpProxyStatTotalConn
OID .1.3.6.1.4.1.22610.2.4.3.6.1
Example
axFastHttpProxyStatTotalConn.0:-->3
OID .1.3.6.1.4.1.22610.2.4.3.6.2
Example
axFastHttpProxyStatTotalReq.0:-->12
axFastHttpProxyStatTotalSuccReq
Description Get the total number of fast HTTP requests which connected successful.
OID .1.3.6.1.4.1.22610.2.4.3.6.3
Example
axFastHttpProxyStatTotalSuccReq.0:-->10
axFastHttpProxyStatTotalNoProxy
OID .1.3.6.1.4.1.22610.2.4.3.6.4
Example
axFastHttpProxyStatTotalNoProxy.0:-->0
axFastHttpProxyStatTotalCRst
Description Get the total number of fast HTTP connections reset by clients.
OID .1.3.6.1.4.1.22610.2.4.3.6.5
Example
axFastHttpProxyStatTotalCRst.0:-->16990
axFastHttpProxyStatTotalSRst
Description Get the total number of fast HTTP connections reset by servers.
OID .1.3.6.1.4.1.22610.2.4.3.6.6
axFastHttpProxyStatTotalNoTuple
OID .1.3.6.1.4.1.22610.2.4.3.6.7
Example
axFastHttpProxyStatTotalNoTuple.0:-->0
axFastHttpProxyStatTotalReqErr
Description Get the total number of failures to parse received fast HTTP requests.
OID .1.3.6.1.4.1.22610.2.4.3.6.8
Example
axFastHttpProxyStatTotalReqErr.0:-->0
axFastHttpProxyStatTotalSvrSelErr
Description Get the total number of fast HTTP server selection failures.
OID .1.3.6.1.4.1.22610.2.4.3.6.9
Example
axFastHttpProxyStatTotalSvrSelErr.0:-->0
axFastHttpProxyStatTotalFwdReqErr
OID .1.3.6.1.4.1.22610.2.4.3.6.10
Example
axFastHttpProxyStatTotalFwdReqErr.0:-->1
OID .1.3.6.1.4.1.22610.2.4.3.6.11
Example
axFastHttpProxyStatTotalFwdDataReqErr.0:-->0
axFastHttpProxyStatTotalReqReXmit
OID .1.3.6.1.4.1.22610.2.4.3.6.12
Example
axFastHttpProxyStatTotalReqReXmit.0:-->0
axFastHttpProxyStatTotalReqPktOutOrder
Description Get the total number of fast HTTP request packets received from clients out
of sequence.
OID .1.3.6.1.4.1.22610.2.4.3.6.13
Example
axFastHttpProxyStatTotalReqPktOutOrder.0:-->568841
axFastHttpProxyStatTotalSvrReSel
Description Get the total number of failures of initial real server selection for a fast
HTTP request (for example, due to a TCP Reset sent by the server).
OID .1.3.6.1.4.1.22610.2.4.3.6.14
Example
axFastHttpProxyStatTotalSvrReSel.0:-->2
axFastHttpProxyStatTotalPreMatureClose
Description Get the total number of premature fast HTTP connection closures.
OID .1.3.6.1.4.1.22610.2.4.3.6.15
axFastHttpProxyStatTotalSvrConn
Description Get the total number of fast HTTP connections made with servers.
OID .1.3.6.1.4.1.22610.2.4.3.6.16
Example
axFastHttpProxyStatTotalSvrConn.0:-->4506
axFastHttpProxyStatTotalSNATErr
Description Get the total number of fast HTTP source NAT failures.
OID .1.3.6.1.4.1.22610.2.4.3.6.17
Example
axFastHttpProxyStatTotalSNATErr.0:-->0
axFastHttpProxyStatTable
OID .1.3.6.1.4.1.22610.2.4.3.6.18
Example
axFastHttpProxyStatCurrProxyConns.0:-->36
axFastHttpProxyStatCurrProxyConns.1:-->42
axFastHttpProxyStatCurrProxyConns.2:-->20
axFastHttpProxyStatTotalProxyConns.0:-->77
axFastHttpProxyStatTotalProxyConns.1:-->43
axFastHttpProxyStatTotalProxyConns.2:-->33
axFastHttpProxyStatHttpReq.0:-->1002
axFastHttpProxyStatHttpReq.1:-->36
axFastHttpProxyStatHttpReq.2:-->0
axFastHttpProxyStatHttpReqSucc.0:-->1002
axFastHttpProxyStatHttpReqSucc.1:-->36
axFastHttpProxyStatHttpReqSucc.2:-->0
axHttpProxyStats Objects
axHttpProxyStatTotalConn
OID .1.3.6.1.4.1.22610.2.4.3.7.1
Example
axHttpProxyStatTotalConn.0:-->235
axHttpProxyStatTotalReq
OID .1.3.6.1.4.1.22610.2.4.3.7.2
Example
axHttpProxyStatTotalReq.0:-->45224
axHttpProxyStatTotalSuccReq
Description Get the total number of HTTP requests that resulted in successful connec-
tions.
OID .1.3.6.1.4.1.22610.2.4.3.7.3
Example
axHttpProxyStatTotalSuccReq.0:-->19
axHttpProxyStatTotalNoProxy
OID .1.3.6.1.4.1.22610.2.4.3.7.4
Example
axHttpProxyStatTotalNoProxy.0:-->0
axHttpProxyStatTotalCRst
OID .1.3.6.1.4.1.22610.2.4.3.7.5
Example
axHttpProxyStatTotalCRst.0:-->0
axHttpProxyStatTotalSRst
OID .1.3.6.1.4.1.22610.2.4.3.7.6
Example
axHttpProxyStatTotalSRst.0:-->0
axHttpProxyStatTotalNoTuple
OID .1.3.6.1.4.1.22610.2.4.3.7.7
Example
axHttpProxyStatTotalNoTuple.0:-->0
axHttpProxyStatTotalReqErr
OID .1.3.6.1.4.1.22610.2.4.3.7.8
Example
axHttpProxyStatTotalReqErr.0:-->1
axHttpProxyStatTotalSvrSelErr
OID .1.3.6.1.4.1.22610.2.4.3.7.9
axHttpProxyStatTotalFwdReqErr
OID .1.3.6.1.4.1.22610.2.4.3.7.10
Example
axHttpProxyStatTotalFwdReqErr.0:-->0
axHttpProxyStatTotalFwdDataReqErr
Description Get the total number of firewall data request failures.
OID .1.3.6.1.4.1.22610.2.4.3.7.11
Example
axHttpProxyStatTotalFwdDataReqErr.0:-->0
axHttpProxyStatTotalReqReXmit
Description Get the total number of retransmitted HTTP requests.
OID .1.3.6.1.4.1.22610.2.4.3.7.12
Example
axHttpProxyStatTotalReqReXmit.0:-->0
axHttpProxyStatTotalReqPktOutOrder
Description Get the total number of request packets received out of order.
OID .1.3.6.1.4.1.22610.2.4.3.7.13
Example
axHttpProxyStatTotalReqPktOutOrder.0:-->0
axHttpProxyStatTotalSvrReSel
Description Get the total number of server re-selections due to failure of initial server
selection.
OID .1.3.6.1.4.1.22610.2.4.3.7.14
Example
axHttpProxyStatTotalSvrReSel.0:-->0
axHttpProxyStatTotalPreMatureClose
OID .1.3.6.1.4.1.22610.2.4.3.7.15
Example
axHttpProxyStatTotalPreMatureClose.0:-->0
axHttpProxyStatTotalSvrConn
Description Get the total number of server connections.
OID .1.3.6.1.4.1.22610.2.4.3.7.16
Example
axHttpProxyStatTotalSvrConn.0:-->100
axHttpProxyStatTotalSNATErr
Description Get the total number of source NAT failures.
OID .1.3.6.1.4.1.22610.2.4.3.7.17
Example
axHttpProxyStatTotalSNATErr.0:-->0
OID .1.3.6.1.4.1.22610.2.4.3.7.18
Example
axHttpProxyStatCurrProxyConns.0:-->0
axHttpProxyStatCurrProxyConns.1:-->2
axHttpProxyStatCurrProxyConns.2:-->2
axHttpProxyStatTotalProxyConns.0:-->0
axHttpProxyStatTotalProxyConns.1:-->6
axHttpProxyStatTotalProxyConns.2:-->7
axHttpProxyStatHttpReq.0:-->0
axHttpProxyStatHttpReq.1:-->8
axHttpProxyStatHttpReq.2:-->73
axHttpProxyStatHttpReqSucc.0:-->0
axHttpProxyStatHttpReqSucc.1:-->5
axHttpProxyStatHttpReqSucc.2:-->69
axHttpProxyStatNoProxyErr.0:-->0
axHttpProxyStatNoProxyErr.1:-->0
axHttpProxyStatNoProxyErr.2:-->0
axHttpProxyStatClientRst.0:-->0
axHttpProxyStatClientRst.1:-->3
axHttpProxyStatClientRst.2:-->4
axHttpProxyStatServerRst.0:-->0
axHttpProxyStatServerRst.1:-->1
axHttpProxyStatServerRst.2:-->1
axHttpProxyStatNoTupleErr.0:-->0
axHttpProxyStatNoTupleErr.1:-->0
axHttpProxyStatNoTupleErr.2:-->0
axHttpProxyStatParseReqFail.0:-->0
axHttpProxyStatParseReqFail.1:-->0
axHttpProxyStatParseReqFail.2:-->0
axHttpProxyStatServerSelFail.0:-->0
axHttpProxyStatServerSelFail.1:-->0
axHttpProxyStatServerSelFail.2:-->0
axHttpProxyStatFwdReqFail.0:-->0
axHttpProxyStatFwdReqFail.1:-->0
axHttpProxyStatFwdReqFail.2:-->0
axHttpProxyStatFwdReqDataFail.0:-->0
axHttpProxyStatFwdReqDataFail.1:-->0
axHttpProxyStatFwdReqDataFail.2:-->0
axHttpProxyStatReqReTran.0:-->0
axHttpProxyStatReqReTran.1:-->0
axHttpProxyStatReqReTran.2:-->0
axTcpProxyStats Objects
axTcpProxyStatTotalCurrEstConn
OID .1.3.6.1.4.1.22610.2.4.3.8.1
Example
axTcpProxyStatTotalCurrEstConn.0:-->5
axTcpProxyStatTotalActiveOpenConn
OID .1.3.6.1.4.1.22610.2.4.3.8.2
Example
axTcpProxyStatTotalActiveOpenConn.0:-->5
axTcpProxyStatTotalPassiveOpenConn
OID .1.3.6.1.4.1.22610.2.4.3.8.3
Example
axTcpProxyStatTotalPassiveOpenConn.0:-->4
axTcpProxyStatTotalConnAttemptFail
OID .1.3.6.1.4.1.22610.2.4.3.8.4
Example
axTcpProxyStatTotalConnAttemptFail.0:-->0
axTcpProxyStatTotalInTCPPacket
OID .1.3.6.1.4.1.22610.2.4.3.8.5
Example
axTcpProxyStatTotalInTCPPacket.0:-->52
axTcpProxyStatTotalOutTCPPkt
OID .1.3.6.1.4.1.22610.2.4.3.8.6
Example
axTcpProxyStatTotalOutTCPPkt.0:-->2633
axTcpProxyStatTotalReXmitPkt
OID .1.3.6.1.4.1.22610.2.4.3.8.7
Example
axTcpProxyStatTotalReXmitPkt.0:-->99
axTcpProxyStatTotalRstRcvOnEstConn
Description Get the total number of resets received for established connections.
OID .1.3.6.1.4.1.22610.2.4.3.8.8
axTcpProxyStatTotalRstSent
OID .1.3.6.1.4.1.22610.2.4.3.8.9
Example
axTcpProxyStatTotalRstSent.0:-->0
axTCPProxyStatTable
Description Get the TCP-proxy statistics table.
OID .1.3.6.1.4.1.22610.2.4.3.8.10
Example
axTcpProxyStatCurrEstConns.0:-->0
axTcpProxyStatCurrEstConns.1:-->2
axTcpProxyStatCurrEstConns.2:-->1
axTcpProxyStatActiveOpenConns.0:-->0
axTcpProxyStatActiveOpenConns.1:-->6
axSslStats Objects
axSslStatSSLModNum
OID .1.3.6.1.4.1.22610.2.4.3.9.1
Example
axSslStatSSLModNum.0:-->1
axSslStatCurrSSLConn
OID .1.3.6.1.4.1.22610.2.4.3.9.2
Example
axSslStatCurrSSLConn.0:-->3
OID .1.3.6.1.4.1.22610.2.4.3.9.3
Example
axSslStatTotalSSLConn.0:-->3
axSslStatFailSSLHandshake
OID .1.3.6.1.4.1.22610.2.4.3.9.4
Example
axSslStatFailSSLHandshake.0:-->12
axSslStatSSLMemUsage
Description Get the amount of SSL memory in use. The SSL memory is measured in
bytes.
OID .1.3.6.1.4.1.22610.2.4.3.9.5
Example
axSslStatSSLMemUsage.0:-->0
axSslStatTable
OID .1.3.6.1.4.1.22610.2.4.3.9.6
Example
axSslStatEnableCryptoEngine.1:-->4
axSslStatAvailCryptoEngine.1:-->4
axSslStatSSLFailedCAVfy
Description Get the number of times an SSL session was terminated due to a certificate
verification failure.
OID .1.3.6.1.4.1.22610.2.4.3.9.7
axSslStatSSLNoHWContextMem
Description Indicates the number of times the encryption processor was unable to allo-
cate memory.
OID .1.3.6.1.4.1.22610.2.4.3.9.8
Note: This object and the following object replace the axSslStatEnableCrypto-
Engine and axSslStatAvailCryptoEngine objects at this level. However,
those objects are still available as members of the axSslStatTable
(.1.3.6.1.4.1.22610.2.4.3.9.6).
Description Indicates the number of times the AX software was unable to enqueue an
SSL record to the SSL processor for encryption/decryption. (Essentially,
this is the number of times the processor reached its performance limit.)
OID .1.3.6.1.4.1.22610.2.4.3.9.9
axSslStatSSLFailedCryptoOperation
OID .1.3.6.1.4.1.22610.2.4.3.9.10
axFtpStats Objects
axFtpStatTotalCtrlSession
Description Get the total number of FTP control sessions.
OID .1.3.6.1.4.1.22610.2.4.3.10.1
Example
SNMPv2-SMI::enterprises.22610.2.4.3.10.1.0 = INTEGER: 0
axFtpStatTotalALGPkt
Description Get the total number of FTP application-level gateway (ALG) packets.
OID .1.3.6.1.4.1.22610.2.4.3.10.2
Example
SNMPv2-SMI::enterprises.22610.2.4.3.10.2.0 = INTEGER: 0
axFtpStatALGPktReXmit
OID .1.3.6.1.4.1.22610.2.4.3.10.3
axFtpStatOutConnCtrl
Description Get the total number of out-of-connection FTP control connection entries.
OID .1.3.6.1.4.1.22610.2.4.3.10.4
Example
SNMPv2-SMI::enterprises.22610.2.4.3.10.4.0 = INTEGER: 0
axFtpStatTotalDataSession
OID .1.3.6.1.4.1.22610.2.4.3.10.5
Example
SNMPv2-SMI::enterprises.22610.2.4.3.10.5.0 = INTEGER: 0
axFtpStatOutConnData
Description Get the total number of out-of-connection FTP data connection entries.
OID 1.3.6.1.4.1.22610.2.4.3.10.6
Example
SNMPv2-SMI::enterprises.22610.2.4.3.10.6.0 = INTEGER: 0
axNetStats Objects
axNetStatIPOutNoRoute
OID .1.3.6.1.4.1.22610.2.4.3.11.1
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.1.0 = INTEGER: 0
OID .1.3.6.1.4.1.22610.2.4.3.11.2
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.2.0 = INTEGER: 0
axNetStatTCPSynRcv
OID .1.3.6.1.4.1.22610.2.4.3.11.3
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.3.0 = INTEGER: 0
axNetStatTCPSYNCookieSent
OID .1.3.6.1.4.1.22610.2.4.3.11.4
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.4.0 = INTEGER: 0
axNetStatTCPSYNCookieFail
OID .1.3.6.1.4.1.22610.2.4.3.11.5
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.5.0 = INTEGER: 0
axNetStatTCPReceive
OID .1.3.6.1.4.1.22610.2.4.3.11.6
axNetStatUDPReceive
OID .1.3.6.1.4.1.22610.2.4.3.11.7
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.7.0 = INTEGER: 0
axNetStatServerSelFail
OID .1.3.6.1.4.1.22610.2.4.3.11.8
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.8.0 = INTEGER: 0
axNetStatSourceNATFail
OID .1.3.6.1.4.1.22610.2.4.3.11.9
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.9.0 = INTEGER: 0
axNetStatTCPSynCookieFail
Description Get the number of times a TCP SYN cookie failure occurred.
OID .1.3.6.1.4.1.22610.2.4.3.11.10
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.10.0 = INTEGER: 0
Description Get the number of times traffic was dropped because the requested virtual port was
not available.
OID .1.3.6.1.4.1.22610.2.4.3.11.11
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.11.0 = INTEGER: 0
axNetStatNoSynPktDrop
OID .1.3.6.1.4.1.22610.2.4.3.11.12
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.12.0 = INTEGER: 0
axNetStatConnLimitDrop
Description Get the number of packets dropped because the server connection limit had been
reached.
OID .1.3.6.1.4.1.22610.2.4.3.11.13
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.13.0 = INTEGER: 0
axNetStatConnLimitReset
Description Get the number of connections reset because the server connection limit had been
reached.
OID .1.3.6.1.4.1.22610.2.4.3.11.14
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.14.0 = INTEGER: 0
axNetStatProxyNoSockDrop
Description Get the number of packets dropped because the proxy did not have an available
socket.
OID .1.3.6.1.4.1.22610.2.4.3.11.15
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.15.0 = INTEGER: 0
axNetStatAFleXDrop
OID .1.3.6.1.4.1.22610.2.4.3.11.16
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.16.0 = INTEGER: 0
axNetStatSessionAgingOut
OID .1.3.6.1.4.1.22610.2.4.3.11.17
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.17.0 = INTEGER: 0
axNetStatTCPNoSLB
OID .1.3.6.1.4.1.22610.2.4.3.11.18
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.18.0 = INTEGER: 0
axNetStatUDPNoSLB
OID .1.3.6.1.4.1.22610.2.4.3.11.19
axNetStatTCPOutRSTNoSYN
Description Get the number of Resets sent for which there was no SYN.
OID .1.3.6.1.4.1.22610.2.4.3.11.20
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.20.0 = INTEGER: 0
axNetStatTCPOutRSTL4Proxy
Description Get the number of TCP Reset packets the AX device has sent as a Layer 4 proxy.
OID .1.3.6.1.4.1.22610.2.4.3.11.21
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.21.0 = INTEGER: 0
axNetStatTCPOutRSTACKattack
Description Get the number of TCP Resets sent in response to a TCP ACK attack.
OID .1.3.6.1.4.1.22610.2.4.3.11.22
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.22.0 = INTEGER: 0
axNetStatTCPOutRSTAFleX
Description Get the number of TCP Reset packets the AX device has sent due to an aFleX pol-
icy.
OID .1.3.6.1.4.1.22610.2.4.3.11.23
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.23.0 = INTEGER: 0
axNetStatTCPOutRSTStaleSess
Description Get the number of TCP Reset packets the AX device has sent due to stale TCP ses-
sions.
OID .1.3.6.1.4.1.22610.2.4.3.11.24
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.24.0 = INTEGER: 0
axNetStatTCPOutRSTProxy
Description Get the number of TCP Reset packets the AX device has sent as a TCP proxy.
OID .1.3.6.1.4.1.22610.2.4.3.11.25
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.25.0 = INTEGER: 0
axNetStatNoSYNPktDropFIN
Description Get the number of SYN packets dropped due to a TCP FIN.
OID .1.3.6.1.4.1.22610.2.4.3.11.26
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.26.0 = INTEGER: 0
axNetStatNoSYNPktDropRST
Description Get the number of SYN packets dropped due to a TCP Reset.
OID .1.3.6.1.4.1.22610.2.4.3.11.27
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.27.0 = INTEGER: 0
OID .1.3.6.1.4.1.22610.2.4.3.11.28
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.28.0 = INTEGER: 0
axNetStatSYNThrotte
OID .1.3.6.1.4.1.22610.2.4.3.11.29
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.29.0 = INTEGER: 0
axNetStatSSLSIDPersistSucc
OID .1.3.6.1.4.1.22610.2.4.3.11.30
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.30.0 = INTEGER: 0
axNetStatSSLSIDPersistFail
OID .1.3.6.1.4.1.22610.2.4.3.11.31
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.31.0 = INTEGER: 0
axNetStatClientSSLSIDNotFound
Description Get the number of times a client-SSL session ID was not found.
OID .1.3.6.1.4.1.22610.2.4.3.11.32
axNetStatClientSSLSIDMatch
OID .1.3.6.1.4.1.22610.2.4.3.11.33
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.33.0 = INTEGER: 0
axNetStatClientSSLSIDNotMatch
OID .1.3.6.1.4.1.22610.2.4.3.11.34
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.34.0 = INTEGER: 0
axNetStatServerSSLSIDNotFound
Description Get the number of times a server-SSL session ID was not found.
OID .1.3.6.1.4.1.22610.2.4.3.11.35
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.35.0 = INTEGER: 0
axNetStatServerSSLSIDReset
OID .1.3.6.1.4.1.22610.2.4.3.11.36
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.36.0 = INTEGER: 0
OID .1.3.6.1.4.1.22610.2.4.3.11.37
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.37.0 = INTEGER: 0
axNetStatServerSSLSIDNotMatch
OID .1.3.6.1.4.1.22610.2.4.3.11.38
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.38.0 = INTEGER: 0
axNetStatCreateSSLSIDSucc
Description Get the number of SSL session IDs that have been created successfully.
OID .1.3.6.1.4.1.22610.2.4.3.11.39
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.39.0 = INTEGER: 0
axNetStatCreateSSLSIDFail
Description Get the number of failed attempts to create an SSL session ID.
OID .1.3.6.1.4.1.22610.2.4.3.11.40
Example
SNMPv2-SMI::enterprises.22610.2.4.3.11.40.0 = INTEGER: 0
axNetStatConnRateLimitDrops
OID .1.3.6.1.4.1.22610.2.4.3.11.41
axNetStatConnRateLimitResets
OID .1.3.6.1.4.1.22610.2.4.3.11.42
axNetStatInbandHMRetry
Description Get the number of times the AX device retried an inband health check,
because a SYN-ACK was not received for the previous SYN.
OID .1.3.6.1.4.1.22610.2.4.3.11.43
axNetStatInbandHMReassign
Description Get the number of times the AX device reassigned a client’s traffic to
another server, because the initial server exceeded the maximum number of
retries allowed by the inband health check.
OID .1.3.6.1.4.1.22610.2.4.3.11.44
axNetStat2TCPReceive
Description Get the number of TCP packets received in the 64-bit counter.
OID .1.3.6.1.4.1.22610.2.4.3.11.45
axNetStat2UDPReceive
Description Get the number of UDP packets received in the 64-bit counter.
OID .1.3.6.1.4.1.22610.2.4.3.11.46
axNetStatTable
Note: You also can get these statistics on an individual basis, by getting OIDs
.1.3.6.1.4.1.22610.2.4.3.11.1 through 30. (See above.)
OID .1.3.6.1.4.1.22610.2.4.3.11.100
axNotification Objects
The notification objects are described in “AX MIB Objects: axNotification”
on page 131.
axSmtpProxyStats Objects
axSmtpProxyStatsCurrProxyConns
Description Get the number of currently active SMTP connections that are using the AX
device as an SMTP proxy.
OID .1.3.6.1.4.1.22610.2.4.3.13.1
axSmtpProxyStatsTotalProxyConns
Description Get the total number of SMTP connections that have used the AX device as
an SMTP proxy.
OID .1.3.6.1.4.1.22610.2.4.3.13.2
axSmtpProxyStatsSmtpRequests
OID .1.3.6.1.4.1.22610.2.4.3.13.3
axSmtpProxyStatsSmtpReqSuccs
Description Get the number of SMTP requests received by the AX device that were suc-
cessfully fulfilled (by connection to a real server).
OID .1.3.6.1.4.1.22610.2.4.3.13.4
axSmtpProxyStatsNoProxyError
OID .1.3.6.1.4.1.22610.2.4.3.13.5
axSmtpProxyStatsClientRST
Description Get the number of times TCP connections with clients were reset.
OID .1.3.6.1.4.1.22610.2.4.3.13.6
axSmtpProxyStatsServerRST
Description Get the number of times TCP connections with servers were reset.
OID .1.3.6.1.4.1.22610.2.4.3.13.7
axSmtpProxyStatsNoTupleError
OID .1.3.6.1.4.1.22610.2.4.3.13.8
axSmtpProxyStatsParseReqFail
OID .1.3.6.1.4.1.22610.2.4.3.13.9
OID .1.3.6.1.4.1.22610.2.4.3.13.10
axSmtpProxyStatsFwdReqFail
OID .1.3.6.1.4.1.22610.2.4.3.13.11
axSmtpProxyStatsFwdReqDataFail
OID .1.3.6.1.4.1.22610.2.4.3.13.12
axSmtpProxyStatsReqRetrans
OID .1.3.6.1.4.1.22610.2.4.3.13.13
axSmtpProxyStatsReqPktOutOrder
Description Get the number of request packets received from clients out of sequence.
OID .1.3.6.1.4.1.22610.2.4.3.13.14
axSmtpProxyStatsServerResel
Description Get the number of times a request was forwarded to another server because
the current server was failing.
OID .1.3.6.1.4.1.22610.2.4.3.13.15
axSmtpProxyStatsSvrPrematureClose
Description Get the number of times the connection with a server closed prematurely.
OID .1.3.6.1.4.1.22610.2.4.3.13.16
axSmtpProxyStatsSvrConnMade
OID .1.3.6.1.4.1.22610.2.4.3.13.17
axSmtpProxyStatsSNATFail
OID .1.3.6.1.4.1.22610.2.4.3.13.18
axSmtpProxyStatTable
Description Get the SMTP proxy statistics table.
OID .1.3.6.1.4.1.22610.2.4.3.13.19
axSslProxyStats Objects
axSslProxyStatsCurrProxyConns
Description Get the number of currently active connections using the AX device as an
SSL proxy.
OID .1.3.6.1.4.1.22610.2.4.3.14.1
axSslProxyStatsTotalProxyConns
Description Get the total number of connections using the AX device as an SSL proxy.
OID .1.3.6.1.4.1.22610.2.4.3.14.2
axSslProxyStatsClientErr
OID .1.3.6.1.4.1.22610.2.4.3.14.3
axSslProxyStatsServerErr
OID .1.3.6.1.4.1.22610.2.4.3.14.4
axSslProxyStatsSessNotFound
Description Get the number of times a session was not found.
OID .1.3.6.1.4.1.22610.2.4.3.14.5
axSslProxyStatsNoRoute
OID .1.3.6.1.4.1.22610.2.4.3.14.6
axSslProxyStatsSvrSelFail
OID .1.3.6.1.4.1.22610.2.4.3.14.7
axSslProxyStatsSNATFail
OID .1.3.6.1.4.1.22610.2.4.3.14.8
axPersistentStats Objects
axPersistentStatsUrlHashPersistOKPri
Description Get the number of requests successfully sent to the primary server selected
by URL hashing. The primary server is the one that was initially selected
and then re-used based on the hash value.
OID .1.3.6.1.4.1.22610.2.4.3.15.1
axPersistentStatsUrlHashPersistOKSec
Description Get the number of requests that were sent to another server (a secondary
server) because the primary server selected by URL hashing was unavaila-
ble.
OID .1.3.6.1.4.1.22610.2.4.3.15.2
axPersistentStatsUrlHashPersistFail
Description Get the number of requests that could not be fulfilled using URL hashing.
OID .1.3.6.1.4.1.22610.2.4.3.15.3
axPersistentStatsSIPPersistOK
Description Get the number of requests successfully sent to the same server as previous
requests from the same client, based on source-IP persistence.
OID .1.3.6.1.4.1.22610.2.4.3.15.4
axPersistentStatsSIPPersistFail
Description Get the number of requests that could not be fulfilled by the same server as
previous requests from the same client, based on source-IP persistence.
OID .1.3.6.1.4.1.22610.2.4.3.15.5
axPersistentStatsSSLSIDPersistOK
OID .1.3.6.1.4.1.22610.2.4.3.15.6
axPersistentStatsSSLSIDPersistFail
OID .1.3.6.1.4.1.22610.2.4.3.15.7
axPersistentStatsCookiePersistOK
Description Get the total number of cookie persistence successes.
OID .1.3.6.1.4.1.22610.2.4.3.15.8
axPersistentStatsCookiePersistFail
OID .1.3.6.1.4.1.22610.2.4.3.15.9
axPersistentStatsPersistCookieNotFound
Description Get the total number of cookie persistence failures in cases where a cookie
could not be found.
OID .1.3.6.1.4.1.22610.2.4.3.15.10
axPersistentStatTable
OID .1.3.6.1.4.1.22610.2.4.3.15.11
axSwitchStats Objects
axSwitchStatsL2Forward
Description Get the number of packets that have been Layer-2 switched.
OID .1.3.6.1.4.1.22610.2.4.3.16.1
axSwitchStatsL3IPForward
Description Get the number of packets that have been Layer-3 routed.
OID .1.3.6.1.4.1.22610.2.4.3.16.2
axSwitchStatsIPv4NoRouteDrop
Description Get the number of IPv4 packets that were dropped due to routing failures.
OID .1.3.6.1.4.1.22610.2.4.3.16.3
axSwitchStatsL3IPv6Forward
Description Get the number of IPv6 packets that have been Layer-3 routed.
OID .1.3.6.1.4.1.22610.2.4.3.16.4
axSwitchStatsIPv6NoRouteDrop
Description Get the number of IPv6 packets that were dropped due to routing failures.
OID .1.3.6.1.4.1.22610.2.4.3.16.5
axSwitchStatsL4Process
Description Get the number of packets that went to a VIP or NAT for processing.
OID .1.3.6.1.4.1.22610.2.4.3.16.6
axSwitchStatsIncorrectLenDrop
Description Get the number of packets dropped due to incorrect protocol length.A high
value for this counter can indicate a packet length attack.
OID .1.3.6.1.4.1.22610.2.4.3.16.7
axSwitchStatsProtoDownDrop
Description Get the number of packets dropped because the corresponding protocol was
disabled.
OID .1.3.6.1.4.1.22610.2.4.3.16.8
Description Get the number of packets dropped because the protocol was unknown.
OID .1.3.6.1.4.1.22610.2.4.3.16.9
axSwitchStatsTTLExceedDrop
OID .1.3.6.1.4.1.22610.2.4.3.16.10
axSwitchStatsLinkdownDrop
Description Get the number of packets dropped because the outgoing link was down.
OID .1.3.6.1.4.1.22610.2.4.3.16.11
axSwitchStatsSRCPortSuppress
Description Get the number of packet drops because of source port suppression.
OID .1.3.6.1.4.1.22610.2.4.3.16.12
axSwitchStatsVLANFlood
Description Get the number of packets that have been broadcast to a VLAN.
OID .1.3.6.1.4.1.22610.2.4.3.16.13
axSwitchStatsIPFragRcv
Description Get the number of IPv4 fragments that have been received.
OID .1.3.6.1.4.1.22610.2.4.3.16.14
axSwitchStatsARPReqRcv
Description Get the number of ARP requests that have been received.
OID .1.3.6.1.4.1.22610.2.4.3.16.15
axSwitchStatsARPRespRcv
Description Get the number of ARP responses that have been received.
OID .1.3.6.1.4.1.22610.2.4.3.16.16
axSwitchStatsFwdKernel
Description Get the number of packets received by the kernel from data interfaces.
OID .1.3.6.1.4.1.22610.2.4.3.16.17
axSwitchStatsIPTCPFragRcv
Description Get the number of IP TCP fragments received.
OID .1.3.6.1.4.1.22610.2.4.3.16.18
axSwitchStatsIPFragOverlap
OID .1.3.6.1.4.1.22610.2.4.3.16.19
axSwitchStatsIPFragOverlapDrop
OID .1.3.6.1.4.1.22610.2.4.3.16.20
axSwitchStatsIPFragReasmOk
OID .1.3.6.1.4.1.22610.2.4.3.16.21
axSwitchStatsIPFragReasmFail
OID .1.3.6.1.4.1.22610.2.4.3.16.22
Description Get the number of packets dropped by an IP land attack filter. This statistic
and the other Anomaly statistics show how many packets were dropped by
DDoS protection filters. For the AX device to drop these packets, the corre-
sponding DDoS protection options must be enabled.
OID .1.3.6.1.4.1.22610.2.4.3.16.23
axSwitchStatsAnomIPOptionDrop
OID .1.3.6.1.4.1.22610.2.4.3.16.24
axSwitchStatsAnomPingDeathDrop
OID .1.3.6.1.4.1.22610.2.4.3.16.25
axSwitchStatsAnomAllFragDrop
OID .1.3.6.1.4.1.22610.2.4.3.16.26
axSwitchStatsAnomTCPNoFragDrop
Description Get the number of packets dropped by a tcp-no-flag filter.
OID .1.3.6.1.4.1.22610.2.4.3.16.27
axSwitchStatsAnomSYNFragDrop
OID .1.3.6.1.4.1.22610.2.4.3.16.28
axSwitchStatsAnomTCPSynFinDrop
OID .1.3.6.1.4.1.22610.2.4.3.16.29
axSwitchStatsAnomAnyDrop
Description Get the number of packets dropped by any type of hardware-based DDoS
protection filter.
OID .1.3.6.1.4.1.22610.2.4.3.16.30
axSwitchStatTable
OID .1.3.6.1.4.1.22610.2.4.3.16.31
axHA Objects
The HA objects are described in “AX MIB Objects: High Availability
Group” on page 127.
axIpNatStats Objects
axIpNatStatsGlobalHits
OID .1.3.6.1.4.1.22610.2.4.3.18.1.1
axIpNatStatsGlobalMisses
OID .1.3.6.1.4.1.22610.2.4.3.18.1.2
OID .1.3.6.1.4.1.22610.2.4.3.18.2.1
axIpNatStatsDynamicMappingTable
OID .1.3.6.1.4.1.22610.2.4.3.18.3.1
axIpNatPoolStatsTable
Description Get the table of statistics for source NAT address pools.
OID .1.3.6.1.4.1.22610.2.4.3.18.100.1
This chapter describes the MIB objects in the High Availability (HA) group.
axHAGlobalConfig Objects
axHAConfigEnabled
Description Get the HA state. The object can have one of the following values:
• Disabled(0)
• Enabled(1)
OID .1.3.6.1.4.1.22610.2.4.3.17.1.1
axHAID
Description Get the local HA group ID.
OID .1.3.6.1.4.1.22610.2.4.3.17.1.2
axHASetID
OID .1.3.6.1.4.1.22610.2.4.3.17.1.3
axHAPreemptStatusEnabled
Description Get the state (enabled or disabled) of HA pre-emption. The object can have
one of the following values:
• Disabled(0)
• Enabled(1)
OID .1.3.6.1.4.1.22610.2.4.3.17.1.4
axHATimeoutInterval
OID .1.3.6.1.4.1.22610.2.4.3.17.1.5
axHATimeoutRetry
Description Get the number of retries allowed if the HA heartbeat interval times out.
OID .1.3.6.1.4.1.22610.2.4.3.17.1.6
axHAARPRetry
Description Get the number of additional gratuitous ARPs, in addition to the first ones, an AX
sends after transitioning from Standby to Active.
OID .1.3.6.1.4.1.22610.2.4.3.17.1.7
axHAGroup Objects
axHAGroupCount
OID .1.3.6.1.4.1.22610.2.4.3.17.2.1
axHAGroupStatusTable
OID .1.3.6.1.4.1.22610.2.4.3.17.2.2
Example
[root@localhost axApp]# snmpwalk -v 2c -c public 192.168.1.239
1.3.6.1.4.1.22610.2.4.3.17
SNMPv2-SMI::enterprises.22610.2.4.3.17.1.1.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.3.17.1.2.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.3.17.1.3.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.3.17.1.4.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.3.17.1.5.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.3.17.1.6.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.3.17.1.7.0 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.3.17.2.1.0 = INTEGER: 2
SNMPv2-SMI::enterprises.22610.2.4.3.17.2.2.1.1.1 = INTEGER: 1
SNMPv2-SMI::enterprises.22610.2.4.3.17.2.2.1.1.10 = INTEGER: 10
SNMPv2-SMI::enterprises.22610.2.4.3.17.2.2.1.2.1 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.3.17.2.2.1.2.10 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.3.17.2.2.1.3.1 = INTEGER: 33
SNMPv2-SMI::enterprises.22610.2.4.3.17.2.2.1.3.10 = INTEGER: 22
SNMPv2-SMI::enterprises.22610.2.4.3.17.2.2.1.4.1 = INTEGER: 9
SNMPv2-SMI::enterprises.22610.2.4.3.17.2.2.1.4.10 = INTEGER: 9
SNMPv2-SMI::enterprises.22610.2.4.3.17.2.2.1.5.1 = INTEGER: 0
SNMPv2-SMI::enterprises.22610.2.4.3.17.2.2.1.5.10 = INTEGER: 0
axHAFloatingIP Objects
axHAFloatingIPCount
OID .1.3.6.1.4.1.22610.2.4.3.17.3.1
axHAFloatingIPTable
OID .1.3.6.1.4.1.22610.2.4.3.17.3.2
Example
[root@localhost lb]# snmpwalk -v 2c -c public 192.168.1.239
1.3.6.1.4.1.22610.2.4.3.17.3
SNMPv2-SMI::enterprises.22610.2.4.3.17.3.1.0 = INTEGER: 3
SNMPv2-SMI::enterprises.22610.2.4.3.17.3.2.1.1.1 = INTEGER: 1
SNMPv2-SMI::enterprises.22610.2.4.3.17.3.2.1.1.2 = INTEGER: 2
SNMPv2-SMI::enterprises.22610.2.4.3.17.3.2.1.1.3 = INTEGER: 3
SNMPv2-SMI::enterprises.22610.2.4.3.17.3.2.1.2.1 = STRING: "1.1.1.10"
SNMPv2-SMI::enterprises.22610.2.4.3.17.3.2.1.2.2 = STRING: "2001::3"
SNMPv2-SMI::enterprises.22610.2.4.3.17.3.2.1.2.3 = STRING: "2001::4"
SNMPv2-SMI::enterprises.22610.2.4.3.17.3.2.1.3.1 = INTEGER: 1
SNMPv2-SMI::enterprises.22610.2.4.3.17.3.2.1.3.2 = INTEGER: 1
SNMPv2-SMI::enterprises.22610.2.4.3.17.3.2.1.3.3 = INTEGER: 2
This chapter describes the system notification objects in the axApp group.
Note: These objects are supported for SNMPv2 and SNMPv1, in separate files.
(See “AX MIB Files” on page 21.)
axNotificationObjects
axNotificationMsg
OID .1.3.6.1.4.1.22610.2.4.3.12.1.1
axNotificationSLBServer
Description Indicates the IP address or hostname of the server.
OID .1.3.6.1.4.1.22610.2.4.3.12.1.2
axNotificationSLBPort
OID .1.3.6.1.4.1.22610.2.4.3.12.1.3
axNotificationSLBCurConns
OID .1.3.6.1.4.1.22610.2.4.3.12.1.4
axNotificationVirtualServer
OID .1.3.6.1.4.1.22610.2.4.3.12.1.5
axNotificationVirtualServerPort
OID .1.3.6.1.4.1.22610.2.4.3.12.1.6
axNotificationVirtualServerPortType
OID .1.3.6.1.4.1.22610.2.4.3.12.1.7
axNotificationDropEventReason
Description Provides the event indicator type. Examples include “Firmware”, “HighPer-
formanceDriver”, “L2”, and “L3”.
OID .1.3.6.1.4.1.22610.2.4.3.12.1.8
axNotificationConfiguredThreshold
Description Indicates the configured notification threshold value.
OID .1.3.6.1.4.1.22610.2.4.3.12.1.9
axNotificationCurrentUsage
OID .1.3.6.1.4.1.22610.2.4.3.12.1.10
axNotificationConnLimit
OID .1.3.6.1.4.1.22610.2.4.3.12.1.11
Description Indicates the ID of a trunk. This object and the following two objects are
used by the axNetworkTrunkPortsThreshold notification object (described
below).
OID .1.3.6.1.4.1.22610.2.4.3.12.1.12
axNotificationPortThreshold
OID .1.3.6.1.4.1.22610.2.4.3.12.1.13
axNotificationCurrentUpPorts
OID .1.3.6.1.4.1.22610.2.4.3.12.1.14
axNotificationFanName
Description Indicates the name assigned to the system fan.
OID .1.3.6.1.4.1.22610.2.4.3.12.1.15
axNotificationPowerSupplyName
OID .1.3.6.1.4.1.22610.2.4.3.12.1.16
axNotificationHAGroupID
OID .1.3.6.1.4.1.22610.2.4.3.12.1.17
axNotificationSLBServiceGroupName
Description Indicates the service group name.
OID .1.3.6.1.4.1.22610.2.4.3.12.1.18
axSystemNotifications
axSystemStart
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.1
axSystemShutdown
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.2
axSystemTempHigh
Description Indicates that the temperature inside the AX chassis is too high (68 C or
higher).
If you see this notification, check for fan failure notifications. Also check
the installation location to ensure that the chassis room temperature is not
too high (40 C or higher) and that the chassis is receiving adequate air flow.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.3
axFan1Failure
Description Indicates that system fan 1 has failed. Contact A10 Networks.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.4
axFan2Failure
Description Indicates that system fan 2 has failed. Contact A10 Networks.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.5
axFan3Failure
Description Indicates that system fan 3 has failed. Contact A10 Networks.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.6
Description Indicates that the upper power supply has failed. The power supply needs to
be replaced.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.9
axLowerPowerSupplyFailure
Description Indicates that the lower power supply has failed. The power supply needs to
be replaced.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.10
axPrimaryHardDiskFailure
Description Indicates that the primary Hard Disk has failed or the RAID system has
failed. Contact A10 Networks. The primary Hard Disk is the one on the left,
as you are facing the front of the AX chassis.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.11
axSecondaryHardDiskFailure
Description Indicates that the secondary Hard Disk has failed or the RAID system has
failed. Contact A10 Networks. The secondary Hard Disk is the one on the
right, as you are facing the front of the AX chassis.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.12
axHardDiskUsageHigh
Description Indicates that hard disk usage on the AX device is higher than the config-
ured threshold.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.13
axMemoryUsageHigh
Description Indicates that the memory usage on the AX device is higher than the config-
ured threshold.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.14
axSystemRestart
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.15
axSystemDropPacketEvent
Description Indicates that a packet has been dropped, for the reason indicated.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.16
axSystemRelieveDropPacketEvent
Description Indicates that the condition that caused the packet loss indicated by axSys-
temDropPacketEvent (above) has been resolved.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.17
axSystemControlCpuHigh
Description Indicates that control CPU utilization is higher than the configured thresh-
old.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.18
axSystemDataCpuHigh
Description Indicates that data CPU utilization is higher than the configured threshold.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.19
axSystemFanFailure
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.20
axSystemPowerSupplyFailure
OID .1.3.6.1.4.1.22610.2.4.3.12.2.1.21
axAppNotifications
axHAStandby
Note: This object is deprecated in AX Release 2.6 and later. Instead, see
“axHAGroupStatusTable” on page 126.
axHAActive
Note: This object is deprecated in AX Release 2.6 and later. Instead, see
“axHAGroupStatusTable” on page 126.
axHAActiveActive
Note: This object is deprecated in AX Release 2.6 and later. Instead, see
“axHAGroupStatusTable” on page 126.
axServiceDown
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.4
axServiceUp
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.5
axServerDown
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.6
axServerUp
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.7
axServerConnLimit
Description Indicates that an SLB server has reached its configured connection limit.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.8
axServerConnResume
Description Indicates that an SLB server has reached its configured connection-resume
value.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.9
axServiceConnLimit
Description Indicates that an SLB service has reached its configured connection limit.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.10
axServiceConnResume
Description Indicates that an SLB service has reached its configured connection-resume
value.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.11
axVirtualServerPortDown
Description Indicates that an SLB virtual service port has gone down.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.12
axVirtualServerPortUp
Description Indicates that an SLB virtual service port has come up. An SLB virtual
server’s service port is up when at least one member (real server and real
port) in the service group bound to the virtual port is up.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.13
Description Indicates that SLB application buffer usage has exceeded the configured
threshold.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.14
axVirtualServerPortReachConnLimit
Description Indicates that a virtual server port has reached the configured connection
limit.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.15
axVirtualServerPortReachConnRateLimit
Description Indicates that a virtual server port has reached the configured connection-
rate limit.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.16
axVirtualServerReachConnLimit
Description Indicates that a virtual server has reached the configured connection limit.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.17
axVirtualServerReachConnRateLimit
Description Indicates that a virtual server has reached the configured connection-rate
limit.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.18
axServerConnRateLimit
Description Indicates that a real server has reached the configured connection-rate limit.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.19
axServiceConnRateLimit
Description Indicates that a real port has reached the configured connection-rate limit.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.20
axServiceGroupMemberEnabledForNewConn
Description Indicates that an SLB service group member is enabled to accept a new con-
nection, when the current connections of group members exceeds the con-
nection limit.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.21
axServiceGroupMemberDisabledForNewConn
Description Indicates that an SLB service group member is disabled, when the current
connections of group members are reduced to the connection resume thresh-
old.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.22
axVrrpActive
Description Indicates that a VRID has transitioned to the active state.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.23
axVrrpStandby
OID .1.3.6.1.4.1.22610.2.4.3.12.2.2.24
axNetworkNotifications
axNetworkTrunkPortsThreshold
Description Indicates that the number of up ports in a trunk has fallen below the config-
ured threshold.
OID .1.3.6.1.4.1.22610.2.4.3.12.2.3.1
This chapter describes the AX MIB support for network and application
objects in individual Role-based Administration (RBA) partitions.
Note: RBA is also called “Application Delivery Partitioning (ADP)”. The Layer
2/3 virtualization functionality that you can enable on individual parti-
tions is sometimes called “L3V”.
Note: Queries for a specific private partition apply only to partitions in which
Layer 2/3 virtualization is enabled. For partitions in which Layer 2/3 vir-
tualization is not enabled, the statistics are included in the shared partition
statistics.
For example, these query options are supported for the following network
objects:
• axTrunkTotal
• axTrunkTable
• axTrunkStatTable
• axTrunkCfgMemberTable
As another example, these query options are supported for the following
application objects, which provide connection counters:
• axAppGlobalTotalCurrentConnections
• axAppGlobalTotalNewConnections
• axAppGlobalTotalNewL4Connections
• axAppGlobalTotalNewL7Connections
• axAppGlobalTotalNewIPNatConnections
• axAppGlobalTotalSSLConnections
• axAppGlobalTotalL7Requests
• axGlobalTotalL4Session
Network-related Objects
• ifTable
• ifNumber
• ifXTable
• axInterfaceCount
• axInterfaceTable
• axInterfaceStatTable
• axVlanCfgMemberTable
• axVlanCfgTable
• axTrunkTotal
• axTrunkTable
• axTrunkStatTable
• axTrunkCfgMemberTable
Application-related Objects
• axServerCount
• axServerTable
• axServerStatTable
• axServerPortTable
• axServerPortStatTable
• axServiceGroupCount
• axServiceGroupTable
• axServiceGroupStatTable
• axServiceGroupMemberTable
• axServiceGroupMemberStatTable
• axVirtualServerCount
• axVirtualServerTable
• axVirtualServerStatTable
• axVirtualServerPortTable
• axVirtualServerPortStatTable
• axAppGlobalTotalNewConnections
• axAppGlobalTotalNewL4Connections
• axAppGlobalTotalNewL7Connections
• axAppGlobalTotalNewIPNatConnections
• axAppGlobalTotalSSLConnections
• axAppGlobalTotalL7Requests
• axGlobalTotalL4Session
Notes
• The “@” character is not supported in community strings or SNMPv3
usernames.
• If the specified partition is not configured on the AX device, queries for
partition-aware objects are rejected. However, queries for other objects
are still accepted.
• axServiceUp
• axServerDown
• axServerUp
• axServerConnLimit
• axServerConnResume
• axServiceConnLimit
• axServiceConnResume
• axVirtualServerPortDown
• axVirtualServerPortUp
• axServerConnRateLimit
• axServiceConnRateLimit
• axVirtualServerPortReachConnLimit
• axVirtualServerPortReachConnRateLimit
• axVirtualServerReachConnLimit
• axVirtualServerReachConnRateLimit
• axServiceGroupMemberDisabledForNewConn
• axServiceGroupMemberEnabledForNewConn
For any of these notification objects, if the resource belongs to a private par-
tition, the axNotificationPartitionName object is included in the notifica-
tion.
Example
For example, if a real server (s1, 10.10.1.1) that belongs to the shared parti-
tion goes down, the values for the following objects are included in the noti-
fication:
• axNotificationMsg – “Server s1 (10.10.1.99) is down.”
• axNotificationSLBServer – “10.10.1.1”
• axNotificationSLBServer – “10.10.1.99”
• axNotificationPartitionName – “part1”
Interface Objects
The partition name is included as part of the ifDescr value in entries in the
following tables:
• ifTable
• ifXTable
• ifNumber
Example:
The ifNumber is the total of physical and VE interfaces across all partitions.
The ifTable/ifXTable aggregates table entries across all partition with differ-
ent ifIndex values and ifDescr is defined as follows:
Application-related Objects
The values for the following objects are aggregate values for all partitions:
• axServerCount
• xServiceGroupCount
• axVirtualServerCount
The following tables include values only for a given partition. The table
name includes the private partition name.
• axServerTable
• axServerPortTable
• axServiceGroupTable
• axServiceGroupStatTable
• axServiceGroupMemberTable
• axServiceGroupMemberStatTable
• axVirtualServerTable
• axVirtualServerPortTable
Example:
In axVirtualServerPortTable, the table name index, axVirtualServerPort-
Name, will be converted as:
• <object_name> – for shared partition object names
The partition name is not included in the table name for the following statis-
tics tables. However, the private partition name is included in the table
address index.
• axServerStatTable
• axServerPortStatTable
• axVirtualServerStatTable
• axVirtualServerPortStatTable
Example:
In axVirtualServerStatTable, the address axVirtualServerStatAddress will
be converted as:
• <object_ip_address> – for shared partition object names
Corporate Headquarters
www.a10networks.com
148