Different Irrigation Systems
Different Irrigation Systems
Different Irrigation Systems
drishtiias.com/printpdf/different-irrigation-systems
Irrigation
Irrigation is the artificial application of water to the soil or agricultural field. It is the
replacement or supplementation of rainwater with another source of water. It is used in
dry areas and during periods of inadequate rainfall.
The main idea behind irrigation systems is to assist in the growth of agricultural crops
and plants by maintaining with the minimum amount of water required, suppressing
weed growth in grain fields, preventing soil consolidation etc.
Canal Irrigation
1/4
Canals can be an effective source of irrigation in areas of low level relief, deep fertile
soils, perennial source of water and extensive command area. Therefore, the main
concentration of canal irrigation is in the northern plain of India, especially the areas
comprising Uttar Pradesh, Haryana and Punjab.
The digging of canals in rocky and uneven areas is difficult and uneconomic. Thus,
canals are practically absent from the Peninsular plateau area. However, the coastal
and the delta regions in South India do have some canals for irrigation.
Two types: Inundation canals, which are taken out from the rivers without any
regulating system like weirs etc. at their head. Such canals provide irrigation mainly in
the rainy season when the river is in flood and there is excess water. Perennial Canals
are those which are taken off from perennial rivers by constructing a barrage across the
river. Most of the canals in India are perennial.
Merits: Most of the canals provide perennial irrigation and supply water as and when
needed. This saves the crops from drought conditions and helps in increasing the farm
production.
Demerits: Many canals overflow during the rainy season and flood the surrounding
areas. Canal irrigation is suitable in plain areas only.
Tank Irrigation
2/4
Demerits: Many tanks dry up during the dry season and fail to provide irrigation when
it is required. Lifting of water from tanks and carrying it to the fields is a strenuous and
costly exercise.
Drip Irrigation
In drip irrigation, water is applied near the plant root through emitters or drippers, on or
below the soil surface, at a low rate varying from 2-20 liters per hour. The soil moisture
is kept at an optimum level with frequent irrigations.
Among all irrigation methods, drip irrigation is the most efficient and can be practiced
for a large variety of crops, especially in vegetables, orchard crops, flowers and
plantation crops.
Merits: Fertilizer and nutrient loss is minimized due to localized application and
reduced leaching. Field leveling is not necessary. Recycled non-potable water can be
used. Water application efficiency increases. Soil erosion and weed growth is lessened.
Demerits: Initial cost can be more, can result in clogging, wastage of water, time and
harvest, if not installed properly.
Sprinkler Irrigation
In this method, water is sprayed into the air and allowed to fall on the ground surface
somewhat resembling rainfall. The spray is developed by the flow of water under
pressure through small orifices or nozzles. The sprinkler irrigation system is a very
suitable method for irrigation on uneven lands and on shallow soils.
Nearly all crops are suitable for sprinkler irrigation systems except crops like paddy,
jute, etc. The dry crops, vegetables, flowering crops, orchards, plantation crops like tea,
coffee are all suitable and can be irrigated through sprinklers.
Merits: Suitable to all types of soil except heavy clay. Water saving. Increase in yield.
Saves land as no bunds etc. are required.
Demerits: Higher initial cost. Under high wind conditions and high temperature
distribution and application efficiency is poor.
3/4
Other Types of Irrigation
Way Forward
The farmers should be acquainted with the type of soil moisture, quality of irrigation water,
frequency of irrigation for the proper implementation of irrigation systems.
4/4