GRUNDFOS DATA BOOKLET

CRN1S-10 A-FGJ-G-E-HQQE 3x230/400 50HZ

Grundfos pump 96515907

Thank you for your interest in our products. Please contact us for more information, or visit our website

https://www.lenntech.com/grundfos/CRN1S/96515907/CRN-1S-10-A-FGJ-G-E-HQQE.html

info@lenntech.com
tel. +31 152 610 900
fax. +31 152 616 289

BE > THINK > INNOVATE

 Position Qty. Description
1 CRN 1S-10 A-FGJ-A-E-HQQE

Product No.: On request

Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Pump
materials in contact with the liquid are in high-grade stainless steel. Power transmission is via a rigid
split coupling. Pipe connection is via combined DIN-ANSI-JIS flanges.

The pump is fitted with a 3-phase, fan-cooled asynchronous motor.

Further product details

Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodic
electro-deposition (CED) process. CED is a high-quality dip-painting process where an electrical field
around the products ensures deposition of paint particles as a thin, well-controlled layer on the surface.
An integral part of the process is a pretreatment. The entire process consists of these elements:
1) Alkaline-based cleaning.
2) Zinc phosphating.
3) Cathodic electro-deposition.
4) Curing to a dry film thickness 18-22 my m.
The colour code for the finished product is NCS 9000/RAL 9005.

Pump
The pump head and flange for motor mounting is made in one piece (cast iron). The pump head cover
is a separate component (stainless steel). The pump head has a combined 1/2" priming plug and vent
screw.

The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system. This seal
type is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,
this seal type is suitable for high-pressure applications. The cartridge construction also protects the
pump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.
Primary seal:
• Rotating seal ring material: silicon carbide (SiC)
• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of this
material pairing offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The shaft seal is screwed into the pump head.

Printed from Grundfos Product Centre [2018.06.003] 1/13

 Position Qty. Description
The pump has a stainless-steel base mounted on a seperate base plate. This base and base plate are
kept in position by the tension of the staybolts which hold the pump together. The outlet side of the
base has a combined drain plug and bypass valve. The pump is secured to the foundation by four bolts
through the base plate. The flanges and base are cast in one piece and prepared for connection by
means of DIN, ANSI or JIS.

Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards.
The motor is flange-mounted with tapped-hole flange (FT).
Motor-mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).
Electrical tolerances comply with IEC 60034.
The motor efficiency is classified as IE3 in accordance with IEC 60034-30-1.
The motor does not incorporate motor protection and must be connected to a motor-protective circuit
breaker which can be manually reset. The motor-protective circuit breaker must be set according to the
rated current of the motor (I1/1).
Technical data

Controls:
Frequency converter: NONE

Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 120 °C
Liquid temperature during operation: 20 °C
Density: 998.2 kg/m³

Technical:
Rated flow: 0.9 m³/h
Rated head: 39.9 m
Pump orientation: Vertical
Shaft seal arrangement: Single
Code for shaft seal: HQQE
Approvals on nameplate: CE, EAC,ACS
Curve tolerance: ISO9906:2012 3B

Materials:
Base: Stainless steel
EN 1.4408
AISI 316
Impeller: Stainless steel
EN 1.4401
AISI 316
Bearing: SIC

Installation:
Maximum ambient temperature: 40 °C
Maximum operating pressure: 25 bar
Max pressure at stated temp: 25 bar / 120 °C
25 bar / -20 °C
Type of connection: DIN / ANSI / JIS
Size of inlet connection: DN 25/32
1 1/4 inch
Size of outlet connection: DN 25/32
1 1/4 inch
Pressure rating for pipe connection: PN 25
Flange rating inlet: 300 lb
Flange size for motor: FT85

Electrical data:
Motor standard: IEC
Motor type: 71A
IE Efficiency class: IE3
Rated power - P2: 0.37 kW
Power (P2) required by pump: 0.37 kW
Mains frequency: 50 Hz

Printed from Grundfos Product Centre [2018.06.003] 2/13

 Position Qty. Description
Rated voltage: 3 x 220-240D/380-415Y V
Rated current: 1.74/1.00 A
Starting current: 490-530 %
Cos phi - power factor: 0.80-0.70
Rated speed: 2850-2880 rpm
Efficiency: IE3 73,8%
Motor efficiency at full load: 73.8 %
Motor efficiency at 3/4 load: 79.0 %
Motor efficiency at 1/2 load: 75.5 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F

Others:
Minimum efficiency index, MEI ≥: 0.54
Net weight: 23.5 kg
Gross weight: 26.3 kg
Shipping volume: 0.063 m³

Printed from Grundfos Product Centre [2018.06.003] 3/13

 On request CRN 1S-10 A-FGJ-A-E-HQQE 50 Hz
H CRN 1S-10, 3*400 V, 50Hz eta
[m] [%]

65

60 60

55 55

50 50

45 45

40 40

35 35

30 30

25 25

20 20

15 15

10 10

5 5

0 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 Q [m³/h]
P NPSH
[W] [m]

400 8
P1

300 6
P2

200 4

100 2

0 0

Printed from Grundfos Product Centre [2018.06.003] 4/13

 H CRN 1S-10, 3*400 V, 50Hz eta
Description Value [m] [%]
General information:
Product name: CRN 1S-10 A-FGJ-A-E-HQQE 65

Product No: On request 60 60

EAN number: On request
55 55
Technical:
Rated flow: 0.9 m³/h 50 50

Rated head: 39.9 m 45 45

Stages: 10
40 40
Impellers: 10
35 35
Number of reduced-diameter 0
impellers: 30 30
Low NPSH: N
25 25
Pump orientation: Vertical
Shaft seal arrangement: Single 20 20
Code for shaft seal: HQQE 15 15
Approvals on nameplate: CE, EAC,ACS
10 10
Curve tolerance: ISO9906:2012 3B
Pump version: A 5 5
Model: A 0 0
Materials: 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Q [m³/h]
P NPSH
Base: Stainless steel [W] [m]
EN 1.4408
400 P1 8
AISI 316
Impeller: Stainless steel
300 6
EN 1.4401 P2
AISI 316
200 4
Material code: A
Code for rubber: E
Bearing: SIC 100 2

Installation:
Maximum ambient temperature: 40 °C 0 0

Maximum operating pressure: 25 bar 85

32
100
1
4
x

4
1
x
3

1 X G 1/2

297

G 1/2 105
210

180
250
150

109
141

Max pressure at stated temp: 25 bar / 120 °C 109

141
25 bar / -20 °C
Type of connection: DIN / ANSI / JIS
Size of inlet connection: DN 25/32
191

1 1/4 inch
Size of outlet connection: DN 25/32
105
1 1/4 inch G 1/2 G 1/2

Pressure rating for pipe PN 25 4 x 19 x 27

connection:
408

1 X G 1/2
Flange rating inlet: 300 lb
Flange size for motor: FT85
105
140

Connect code: FGJ

34
75

Liquid: 100 32 4 x 13
150 85
Pumped liquid: Water 250 180

Liquid temperature range: -20 .. 120 °C 210

Liquid temperature during 20 °C

operation:
Density: 998.2 kg/m³ HIGH VOLTAGE
DIRECTION OF ROTATION
Electrical data:
Motor standard: IEC
Motor type: 71A
L3

IE Efficiency class: IE3

L1 L2

Rated power - P2: 0.37 kW

Power (P2) required by pump: 0.37 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 220-240D/380-415Y V LOW VOLTAGE
DIRECTION OF ROTATION
Rated current: 1.74/1.00 A
Starting current: 490-530 %
Cos phi - power factor: 0.80-0.70
L3

Rated speed: 2850-2880 rpm

L1 L2

Efficiency: IE3 73,8%

Motor efficiency at full load: 73.8 %
98.3169

Motor efficiency at 3/4 load: 79.0 %

Printed from Grundfos Product Centre [2018.06.003] 5/13

 Description Value
Motor efficiency at 1/2 load: 75.5 %
Number of poles: 2
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Motor protec: NONE
Motor No: 85805102
Controls:
Frequency converter: NONE
Others:
Minimum efficiency index, MEI ≥: 0.54
Net weight: 23.5 kg
Gross weight: 26.3 kg
Shipping volume: 0.063 m³

Printed from Grundfos Product Centre [2018.06.003] 6/13

 On request CRN 1S-10 A-FGJ-A-E-HQQE 50 Hz
cos phi CRN1S-10 + 71A 0.37 kW 3*400 V, 50 Hz I
eta [A]

cos phi

0.8 1.6
eta

0.6 1.2

0.4 0.8

0.2 0.4

0.0 0.0
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 P2 [kW]
n P1
[rpm] [kW]

n
2800 0.8

P1
2600 0.6

2400 0.4

2200 0.2

2000 0.0

Printed from Grundfos Product Centre [2018.06.003] 7/13

 On request CRN 1S-10 A-FGJ-A-E-HQQE 50 Hz

13
x
140

4
105

180
210
32
85
27
x

34
19
x
4
G 1/2

100
141

150
250
109

1 X G 1/2
G 1/2
105

75
191 408

Note! All units are in [mm] unless others are stated.

Disclaimer: This simplified dimensional drawing does not show all details.

Printed from Grundfos Product Centre [2018.06.003] 8/13

 Exploded view

251a

251d

77
28
7
7a 17

301a 219

92 301a

11
92
9

51

11b

105

215a
100
215
49
18
66a
45
67

530a
530

215a 217

6
531a
531
534
534a

Printed from Grundfos Product Centre [2018.06.003] 9/13

 Sectional drawing (TM058200 for TPE2,TPE3)

3 2 1

TM058200
Printed from Grundfos Product Centre [2018.06.003] 10/13
 Exploded view ( TM057026 for MGE model H/I )

251d

251b

291
290

287
277a
287a 273b
293 502

277

252a 286

273a

273

266
275a
268
268a
289a
289

251a 288b
288
288a

252b

159e

150
152
151

157 156
156c
158

185
154
178
172

187
153 191
188
156d

156b
192
156c

159d

Printed from Grundfos Product Centre [2018.06.003] 11/13

 Parts list CRN 1S-10, Product No. On request
Valid from 1.1.2004 (0401)

Pos Description Annotation Données de classification Référence Quantité Unité

+ Motor 1 pcs
- Base cpl. 1 pcs
6 Base 1
56 Base plate 1
201.a Flange 2
203 Lock ring 2
- Sealing parts 1 pcs
- 25 Drain plug w/bypass valve 1
38 O-ring Diameter: 16,3 1
Material type: EPDM
Thickness: 2,4
37 O-ring 2
100 O-ring Diameter: 16,3 2
Material type: EPDM
Thickness: 2,4
- 2 Pump head cpl. 1 pcs
2 Pump head 1
7 Coupling guard 2
7.a Combi Slot Torx screw 4
- 18 Air vent screw 1
Plug 1
Spindle 1
23a Plug 1
28 Hex head screw Length (mm): 20 4
Thread: M6
60 Formed wire spring 1
77 Pump cover 1
- 8 Coupling 1 pcs
9 Hex socket head cap screw Designation: DIN 912 4
Length (mm): 20
Thread: M6
10 Shaft pin Diameter: 5 1
Length (mm): 26
10a Coupling half 2
26 Staybolt Length (mm): 281 4 pcs
Thread: M12
36 Nut Thread: M12 4 pcs
55 Outer sleeve 1 pcs
66a Washer Designation: DIN 125 A2 4 pcs
Internal diameter: 13
Outer diameter: 24
Thickness: 2,5
- 80 Chamber stack 1 pcs
- 4 Chamber cpl. 7
4a Intermediate chamber 1
45 Neck ring 1
65 Neck ring retainer 1
- 4a Chamber w. bearing cpl. 2
4a Intermediate chamber 1
45 Neck ring 1
65 Neck ring retainer 1
- 5a Chamber cpl. 1
4a Intermediate chamber 1
45 Neck ring 1
65 Neck ring retainer 1
36 Lock nut Thread: M8 1
47a Bearing ring, rotating 2
- 49 Impeller cpl. 10
49 Impeller 1

Printed from Grundfos Product Centre [2018.06.003] 12/13

 Pos Description Annotation Données de classification Référence Quantité Unité
- 50a Guide vane 1
Plate 1
50b Top plate 1
- 51 Shaft, spline, cpl. 1
51 Shaft 1
62 Stop ring 1
64a Spacing pipe 7
64a Spacing pipe Internal diameter: 12,85 2
Outer diameter: 15,85
Length (mm): 4,50
64c Clamp, splined Internal diameter: 8,5 1
Outer diameter: 15
66 Wedge lock washer 1
- 105 Shaft seal Material type: HQQE 1 pcs
O-ring 1
O-ring 1
Seal driver, upper 1
Seal driver, lower 1
Spacer ring 1
Pipe 1
Plug 1
Plug 1
Compression spring 1
Socket set screw 1
102 O-ring Diameter: 22,00 1
Material type: EPDM
Thickness: 2,75
103 Seal ring, stationary 1
105 Seal ring, rotating 1
107 O-ring 1
113 Driver 1

Printed from Grundfos Product Centre [2018.06.003] 13/13

Disclaimer: The information about the Grundfos pump in this document may be outdated.
Data may be subject to alterations without further notice.
Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

info@lenntech.com
https://www.lenntech.com
tel. +31 152 610 900
fax. +31 152 616 289