Q2n-4K Firmware Update Guide
Q2n-4K Firmware Update Guide
Q2n-4K Firmware Update Guide
● ZOOM Corporation will bear no responsibility for any losses or third-party claims
resulting from the use of this software. Moreover, distribution, sale, leasing, rental,
alteration, and reverse engineering without permission of this software are
prohibited. The specifications of this software and the contents of this document
could be changed without notice in the future.
• Other product names, registered trademarks and company names in this document are the property of their
respective companies.
• All trademarks and registered trademarks in this document are for identification purposes only and are not
intended to infringe on the copyrights of their respective owners.
2
On Windows
2. Extract the ZIP file.
Select the folder that contains the downloaded ZIP file. Click ① “Compressed Folder Tools” followed by ② “Extract
all”. This extracts the ZIP file.
①
②
3
3. Copy the firmware update file to a microSD card.
Copy the “Q2N4K_FW.BIN” file to a microSD card.
4
On macOS
2. Extract the file.
After downloading, open the ① “Downloads” folder, which appears at the right end of the Dock by default.
Then, click ②. Downloaded files will be shown.
②
①
5
The following procedures are the same on both Windows and macOS.
4. Install new batteries in the Q2n-4K or connect an AC adapter.
NOTE
Executing a firmware update is not possible if the remaining battery power is low.
5. Insert the microSD card into the Q2n-4K microSD card slot.
microSD card
6
7. Press to select “YES ●”.