I N N O VA T I O N ME A NS M OT I O N

FOOTMOTION
PL ATING SYSTEM

Precontoured implants
A complete range of plates for foot
and ankle surgeons
Transfixation screw technology
Reliable compressive technology
FO OT M OT I O N P L AT IN G S Y ST EM

Indications: The Footmotion Plating System is intended for arthrodeses, fractures and osteotomies fixation and revision surgeries of the foot in adults.
Contraindications:
• Serious vascular deterioration, bone devitalization.
• Pregnancy.
• Acute or chronic local or systemic infections.
• Lack of musculo-cutaneous cover, severe vascular deficiency affecting the concerned area.
• Insufficient bone quality preventing a good fixation of the implants into the bone,
• Muscular deficit, neurological deficiency or behavioral disorders, which could submit the implant to abnormal mechanical strains.
• Allergy to one of the materials used or sensitivity to foreign bodies.
• Serious problems of non-compliance, mental or neurological disorders, failure to follow post-operative care recommendations.
• Unstable physical and/or mental condition.

DORSAL LISFRANC ARTHRODESIS PLATES

(Examples of application:osteoarthritis,
ISOLATED LISFRANC ARTHRODESIS PLATES fracture, Lisfranc joint dislocation and
(Examples of application: osteoarthritis, fracture/dislocation after-effects)
fracture, Lisfranc joint dislocation, fracture/
dislocation after-effects)

MEDIAL LISFRANC ARTHRODESIS PLATES

(Example of application: structural
instability)

STRAIGHT PLATES OPENING BASE WEDGE OSTEOTOMY PLATES

(Example of application: severe hallux valgus)

I N N O VA T I O N M E A N S M OT I O N
FO OT M OT I O N P L AT IN G S Y ST EM

EVANS OSTEOTOMY PLATES

(Example of application:Lateral column
lengthening)

COTTON OSTEOTOMY PLATES

(Example of application: Plantar flexion
osteotomy of the medial cuneiform)

CALCANEAL DISPLACEMENT OSTEOTOMY

PLATES
(Examples of application:lateral and medial
displacement calcaneal osteotomy)

TALO-NAVICULAR ARTHRODESIS PLATES

(Examples of application: osteoarthritis, high-
arched foot, equinovarus, flatfoot, and traumatic
after-effects)

LAPIDUS ARTHRODESIS PLATES

(Examples of application: osteoarthritis, functional
1ST METATARSOPHALANGEAL ARTHRODESIS deformity)
PLATES
(Examples of application: hallux rigidus, severe
hallux valgus, polyarthritis)

Plantar

Medio Plantar Dorso medial

T ECHNI C A L FE AT U R E S

PRECONTO UR ED IMPLA NTS

The design of these implants is the

result of a proprietary state-of-the-art
mapping technology to establish the
optimized congruence between the Low profile implants
plate and the bone. 1.4 to 1.7 mm

FIXATION A ND SCR EW FE ATUR ES

• One type of hole for two screw

diameters: Ø2.8 mm and Ø3.5 mm. Ø2.8 mm locking screw (SLT2.8Lxx)

• Locking (SLT2.8Lxx and SLT3.5Lxx) Ø2.8 mm non locking screw (RLT2.8Lxx)

and non locking screws (RLT2.8Lxx
and RLT3.5Lxx) are available for two Ø3.5 mm locking screw (SLT3.5Lxx)
diameters. Lag screws are available
in one diameter (Ø3.5 mm) Ø3.5 mm non locking screw (RLT3.5Lxx)
1
• The screw head is minimally invasive
and buried in the plate (1), limiting Ø3.5 zmm lag screw (QLT3.5Lxx)
the risk of soft tissue irritation.

• The hexalobular screw stamp impro-

ves the torque transmission.

EFFICIENT LO CKING SYSTEM

Features:
(a) - The screw head is stopped in the hole by its cap,
ensuring the locking,
Screw head
cap - The screw head is buried in the plate (a),
- Plate and screws are all made of titanium.
The threads under the screw Coaptation of both profiles during locking, limi-
head and inside the hole have ting the cold welding risk and improving the re-
strictly the same geometrical moval properties.
characteristics.

SPECIFIC FIXATIONS FOR OPTIMIZED STABILIT Y OF THE ASSEMBLY

Ramp oblong hole

The ramp oblong hole allows a simple
and controlled compression by the
screw/plate interface.

Only Ø2.8 mm non-locking screws (RLT2.8Lxx)

can be used for the ramp oblong hole. Compression of the
joint up to 1.5 mm

I N N O VA T I O N M E A N S M OT I O N
A C O MP R EHEN S I V E R A N G E O F P L AT E S

PL ATES FOR 1ST METATAR SOPHAL ANGEAL ARTHRODESIS

1ST MTP ARTHRODESIS PLATES 1ST MTP ARTHRODESIS REVISION PLATES

Standard plates with transfixation screws

Hole for the transfixation screw: The transfixation screw goes through the 1st MTP joint providing stability to the
assembly.

Transfixation screw
1st MTP joint

Narrow plates without transfixation screws

NB : When using a plate without the transfixation screw, another screw

scr (ref. H1.4QT4.0Lxx) can be inserted across the plantar aspect of the joint, outside of the plate.

CLINICAL CASE:

Example of surgery using a plate for 1st Metatarsophalangeal arthrodesis with transfixation screw.

Left foot showing a 1st MTP The solution: 2 months post operative X-ray.
osteoarthritis. • Plate for 1st MTP arthrodesis
(with transfixation screw),
• Plate reference : FMTGD1
A C O MP R EHEN S I V E R A N G E O F P L AT E S

PL ATES FOR D OR SAL LISFR ANC ARTHRODESIS

(Examples of application: osteoarthritis, fracture,

Lisfranc joint dislocation, and fracture/dislocation
after-effects)

Technical features:

2 possible constructs: C2-C3-M2-M3 or

C3-cuboid-M3-M4 arthrodesis,
Solutions for midfoot arthrodesis,
10° cuneo-metatarsal sagittal angulation.

PL ATES FOR MEDIA L LISFR ANC ARTHRODESIS

(Examples of application: structural instability, fracture/

dislocation)

Technical features:

Converging screws offering stable fixation,

10° cuneo-metatarsal sagittal angle,
10° intermetatarsal angle,
Optimized compression thanks to the slotted holes.

PL ATES FOR ISOLATED LISFR ANC ARTHRODESIS

(Examples of application: osteoarthritis, fracture, Lisfranc joint dislocation, and fracture/dislocation

after-effects)

Technical features:

Converging screws offering stable fixation.

Positioning on several rays: TMT2 or TMT3
arthrodeses.
Dorsal-plantar transfixation screw for an
optimized compression to avoid plantar
opening and to reduce the risk of nonunion.
Complete range of plates adapted to
various shapes of cuneiform.

2 types of
transfixation
screws

Positioning screw Lag screw

(RLT3.5Lxx) (QLT3.5Lxx)

I N N O VA T I O N M E A N S M OT I O N
A C O MP R EHEN S I V E R A N G E O F P L AT E S

PL ATES FOR PLANTAR LAPID US ARTHRODESIS

(Examples of application: Hallux valgus, osteoarthritis, functional deformity)

Technical features:

The transfixation screw is inserted through the joint providing stability to the
assembly.
4 types of plates and 2 types of surgical approaches in order to address
different surgical philosophies.
Precontoured implants.
Plantar positioning of the plate:
• Offers stable assembly and generate dynamic compression, the
transfixation screw is inserted through the joint.
Anatomical implant:
• The narrow plates for plantar lapidus are made of Grade 2 Titanium for an
easier adaptation to first tarsometatarsal (TMT1) joint anatomies when using guide gauges for bending.

Dynamic compression Screw angulation up Fixation for the narrow plate:

to 35°
Medial cuneiform Ø3.5 mm single diameter
1st Metatarsal bone
bone • 2 oblong holes: Ø3.5 mm non locking screw
35°
- Distal oblong hole: screw angulation up to 35°,
- Oblong holes positioning allows to avoid
conflicts between screws,
• 2 or 3 holes: Ø3.5 mm locking screw.

Reaction force due

to contact with the ground Transfixation screw

Full range of plantar plates

Plantar narrow plate Standard plantar plate

• 3 offsets
• Titanium grade 5

CLINICAL CASE : NARROW PLATE FOR PLANTAR LAPIDUS ARTHRODESIS

Hallux valgus
and ligamentous
hyperlaxity.
A C O MP R EHEN S I V E R A N G E O F P L AT E S

PLATE FOR D OR SO-MEDIA L LAPIDUS ARTHRODESIS

(Examples of application: osteoarthritis, functional deformity)

Technical features:

Thickness of 1.6mm,
Transfixation screw,
Precontoured implant.

PLATE FOR MEDIO-PLANTAR LAPIDUS ARTHRODESIS

(Examples of application: osteoarthritis, functional deformity)

Technical features:

Avoids the anterior tibial tendon

Transfixation screw
Approach combining the plantar and medial side

I N N O VA T I O N M E A N S M OT I O N
A C O MP R EHEN S I V E R A N G E O F P L AT E S
PL ATE FOR TA LO-NAV ICULA R ARTHRODESIS

(Examples of application: osteoarthritis, high-arched foot, equinovarus, flatfoot and traumatic after-
effects)

Technical features:

Converging screws offering stable fixation.

Transfixation screw: inserted through the joint for a stable
assembly.
Compression is achieved by the transfixation screw.
Balance between the implant low profile and its strength: 1.7 mm
thick.
2 plate sizes (with or without graft).

PLATE
PL ATE FOR OPENING BA
BASE
SE WEDGE
W ED GE METATAR
METATARSS AL OSTEOTOM Y

(Examples of application: severe hallux valgus, flatfoot)

Technical features:

A wedge is integrated into the plate: the wedge size depends on the correction
angle. 3 sizes are available: 3, 4 and 5 mm + 1 neutral plate.
Low profile plate: 1.4 mm thick.
Converging proximal screws offering stable fixation.
3-in-1 dedicated instrument: Distraction, compression and osteotomies.

ANC642
A C O MP R EHEN S I V E R A N G E O F P L AT E S
PLATE FOR CALCA NE AL DISPLACEMENT OSTEOTOM Y

(Examples of application: Medial displacement calcaneal osteotomy, Lateral displacement calcaneal

osteotomy for flat foot)

Technical features:

A central window allowing:

• A better visualization of the osteotomy site,
• A good vascularization for an optimized fusion.
A non locking central screw allowing the calcaneal shift
without a specific instrumentation.

2 transfixation screws allowing:

• The stability of the construct,
• The compression between the two bone fragments,
• The optimization of the anchorage with converging screws

PL ATE FOR EVANS OSTEOTOM Y

(Examples of application: flat foot, calcaneocuboid (cc) joint arthrodesis)

Technical features:
2 types of plates :
Precontoured plates respecting
• Plates with wedge for osteotomies
• The calcaneal anatomy,
• Plate without wedge for graft addition and cc joint fusion.
• The calcaneo-cuboid joint.
3-in-1 dedicated instruments: Distraction, compression and
Converging screws: allowing a stable fixation of the system.
osteotomies.

ANC642

I N N O VA T I O N M E A N S M OT I O N
A C O MP R EHEN S I V E R A N G E O F P L AT E S
PL ATE FOR COTTON OSTEOTOM Y

(Example of application: Plantar flexion osteotomy of the medial cuneiform)

Technical features:

Precontoured plates:
respecting the 1st cuneiform anatomy.
Converging screws allowing a stable fixation of the
system.
2 types of plates:
- Plates with wedge for osteotomy,
- Plates without wedge for graft addition.

STRAIGHT PLATES FOR VARIOUS APPLICATIONS

The Footmotion Plating System set offers a complete range of compressive
straight plates designed for treatments of fractures, osteotomies and fusions
for small bones and bone fragments of the foot.
• From 2 to 7 holes (from 20 mm to 45 mm)
• Controlled compression thanks to ramp oblong holes
• Bendable plates for several constructs
• 1.5 mm thick
IM P L A N TS R EFE R EN CE S

1ST MTP ARTHRODESIS PLATES

Ref. Description Length

FMTDD1 1st MTP Arthrodesis plate - Right - Size 1 36.4 mm

FMTGD1 1 MTP Arthrodesis plate - Left - Size 1

st
36.4 mm

FMTDD2 1st MTP Arthrodesis plate - Right - Size 2 41.4 mm

FMTGD2 1 MTP Arthrodesis plate - Left - Size 2

st
41.4 mm

FMTDD3 1st MTP Arthrodesis plate - Right - Size 3 46.4 mm

FMTGD3 1 MTP Arthrodesis plate - Left - Size 3

st
46.4 mm

1ST MTP ARTHRODESIS PLATES - NARROW

Ref. Description Length

FMTDDN1 1 MTP Arthrodesis plate - Right - Narrow - Size 1

st
41.6 mm

FMTGDN1 1st MTP Arthrodesis plate - Left - Narrow - Size 1 41.6 mm

FMTDDN2 1 MTP Arthrodesis plate - Right - Narrow - Size 2

st
46.4 mm

FMTGDN2 1st MTP Arthrodesis plate - Left - Narrow - Size 2 46.4 mm

1ST MTP ARTHRODESIS REVISION PLATES

Ref. Description Length

FMTDDN4 1 st
MTP Arthrodesis plate - Right - Narrow - Size 4 60.5 mm

FMTGDN4 1st MTP Arthrodesis plate - Left - Narrow - Size 4 60.5 mm

FMTDD4 1 st
MTP Arthrodesis plate - Right - Size 4 60.4 mm

FMTGD4 1st MTP Arthrodesis plate - Left - Size 4 60.4 mm

TALO-NAVICULAR ARTHRODESIS PLATES

Ref. Description Length

FTTDD1 Talo-Navicular Arthrodesis plate - Right - Size 1 22.3 mm

FTTGD1 Talo-Navicular Arthrodesis plate - Left - Size 1 22.3 mm

FTTDD2 Talo-Navicular Arthrodesis plate - Right - Size 2 28.3 mm

FTTGD2 Talo-Navicular Arthrodesis plate - Left - Size 2 28.3 mm

MEDIAL LISFRANC ARTHRODESES PLATES

Ref. Description Length

FETDD1 Medial Lisfranc Arthrodeses plate - Right - Size 1 53.4 mm

FETGD1 Medial Lisfranc Arthrodeses plate - Left - Size 1 53.4 mm

DORSAL LISFRANC ARTHRODESES PLATES

Ref. Description Width

FDTSDN1 Dorsal Lisfranc Arthrodeses plate - Narrow 19 mm

FDTSDS1 Dorsal Lisfranc Arthrodeses plate - Standard 22 mm

FDTSDW1 Dorsal Lisfranc Arthrodeses plate - Wide 25 mm

I N N O VA T I O N M E A N S M OT I O N
IM P L A N TS R EFE R EN CE S

ISOLATED LISFRANC ARTHRODESIS PLATES

Ref. Description Length

FUTDD1 Isolated Lisfranc plate - Right - Size 1 42.6 mm

FUTGD1 Isolated Lisfranc plate - Left - Size 1 42.6 mm

FUTSD1 Isolated Lisfranc plate - Size 1 37.7 mm

PLANTAR LAPIDUS ARTHRODESIS PLATES

Ref. Description Length

FLTSV1 Plantar Lapidus Arthrodesis plate - Size 1 - 3 mm 44.6 mm

FLTSV2 Plantar Lapidus Arthrodesis plate - Size 2 - 5 mm 44.6 mm

FLTSV3 Plantar Lapidus Arthrodesis plate - Size 3 - 7 mm 44.6 mm

PLANTAR LAPIDUS ARTHRODESIS PLATES - NARROW

Ref. Description Length

FLTDV0 Plantar Lapidus Arthrodesis plate - Right - Narrow - Size 0 37 mm

FLTGV0 Plantar Lapidus Arthrodesis plate - Left - Narrow - Size 0 37 mm

FLTDV1 Plantar Lapidus Arthrodesis plate - Right - Narrow - Size 1 41.8 mm

FLTGV1 Plantar Lapidus Arthrodesis plate - Left - Narrow - Size 1 41.8 mm

FLTDV2 Plantar Lapidus Arthrodesis plate - Right - Narrow - Size 2 49.8 mm

FLTGV2 Plantar Lapidus Arthrodesis plate - Left - Narrow - Size 2 49.8 mm

MEDIO-PLANTAR LAPIDUS ARTHRODESIS PLATES - NARROW

Ref. Description Length

FLTDMV1 Medio plantar Lapidus Arthrodesis plate - Right - Narrow - Size 1 41.8 mm

FLTGMV1 Medio plantar Lapidus Arthrodesis plate - Left - Narrow - Size 1 41.8 mm

DORSO-MEDIAL LAPIDUS ARTHRODESIS PLATES

Ref. Description Length

FLTSM1 Dorso-medial Lapidus Arthrodesis plate - Size 1 50 mm

IM P L A N TS R EFE R EN CE S

OPENING WEDGE PLATES

Ref. Description Length

FOTSM0 Opening wedge plate - 0 mm 28 mm

FOTSM3 Opening wedge plate - 3 mm 28 mm

FOTSM4 Opening wedge plate - 4 mm 28 mm

FOTSM5 Opening wedge plate - 5 mm 28 mm

STRAIGHT PLATES

Ref. Description Length

FUTS1 Straight plate - Size 1 - 2 holes 20 mm

FUTS2 Straight plate - Size 2 - 3 holes 25 mm

FUTS3 Straight plate - Size 3 - 4 holes 30 mm

FUTS4 Straight plate - Size 4 - 5 holes 35 mm

FUTS5 Straight plate - Size 5 - 6 holes 40 mm

FUTS6 Straight plate - Size 6 - 7 holes 45 mm

CALCANEAL DISPLACEMENT OSTEOTOMY PLATES

Ref. Description Length

FATSL5 Calcaneal displacement osteotomy plate – 5 mm 21.5 mm

FATSL7.5 Calcaneal displacement osteotomy plate – 7.5 mm 21.5 mm

FATSL10 Calcaneal displacement osteotomy plate – 10 mm 21.5 mm

COTTON OSTEOTOMY PLATES

Ref. Description Width

FCTSM0 Cotton osteotomy plate – 0 mm 24 mm

FCTSM4.5 Cotton osteotomy plate – 4.5 mm 22 mm

FCTSM5.5 Cotton osteotomy plate – 5.5 mm 23 mm

FCTSM6.5 Cotton osteotomy plate – 6.5 mm 24 mm

EVANS OSTEOTOMY PLATES

Ref. Description Length

FVTSL0 Evans osteotomy plate – 0 mm 30 mm

FVTSL6 Evans osteotomy plate – 6 mm 26 mm

FVTSL8 Evans osteotomy plate – 8 mm 28 mm

FVTSL10 Evans osteotomy plate – 10 mm 30 mm

I N N O VA T I O N M E A N S M OT I O N
IMP L A N TS R EFE R EN CE S

Ø2.8 MM SCREWS

LOCKING SCREWS * NON LOCKING SCREWS *

Ref. Description Ref. Description

SLT2.8L10 Locking screw - Ø2.8 mm - L 10 mm RLT2.8L10 Non locking screw - Ø2.8 mm - L 10 mm
SLT2.8L12 Locking screw - Ø2.8 mm - L 12 mm RLT2.8L12 Non locking screw - Ø2.8 mm - L 12 mm
SLT2.8L14 Locking screw - Ø2.8 mm - L 14 mm RLT2.8L14 Non locking screw - Ø2.8 mm - L 14 mm
SLT2.8L16 Locking screw - Ø2.8 mm - L 16 mm RLT2.8L16 Non locking screw - Ø2.8 mm - L 16 mm
SLT2.8L18 Locking screw - Ø2.8 mm - L 18 mm RLT2.8L18 Non locking screw - Ø2.8 mm - L 18 mm
SLT2.8L20 Locking screw - Ø2.8 mm - L 20 mm RLT2.8L20 Non locking screw - Ø2.8 mm - L 20 mm
SLT2.8L22 Locking screw - Ø2.8 mm - L 22 mm RLT2.8L22 Non locking screw - Ø2.8 mm - L 22 mm
SLT2.8L24 Locking screw - Ø2.8 mm - L 24 mm RLT2.8L24 Non locking screw - Ø2.8 mm - L 24 mm
SLT2.8L26 Locking screw - Ø2.8 mm - L 26 mm RLT2.8L26 Non locking screw - Ø2.8 mm - L 26 mm
SLT2.8L28 Locking screw - Ø2.8 mm - L 28 mm RLT2.8L28 Non locking screw - Ø2.8 mm - L 28 mm
SLT2.8L30 Locking screw - Ø2.8 mm - L 30 mm RLT2.8L30 Non locking screw - Ø2.8 mm - L 30 mm
SLT2.8L32 Locking screw - Ø2.8 mm - L 32 mm RLT2.8L32 Non locking screw - Ø2.8 mm - L 32 mm
SLT2.8L34 Locking screw - Ø2.8 mm - L 34 mm RLT2.8L34 Non locking screw - Ø2.8 mm - L 34 mm
* Green anodized * Golden anodized

Ø3.5 MM SCREWS

LOCKING SCREWS * NON LOCKING SCREWS *

Ref. Description Ref. Description

SLT3.5L10 Locking screw - Ø3.5 mm - L 10 mm RLT3.5L10 Non locking screw - Ø3.5 mm - L 10 mm
SLT3.5L12 Locking screw - Ø3.5 mm - L 12 mm RLT3.5L12 Non locking screw - Ø3.5 mm - L 12 mm
SLT3.5L14 Locking screw - Ø3.5 mm - L 14 mm RLT3.5L14 Non locking screw - Ø3.5 mm - L 14 mm
SLT3.5L16 Locking screw - Ø3.5 mm - L 16 mm RLT3.5L16 Non locking screw - Ø3.5 mm - L 16 mm
SLT3.5L18 Locking screw - Ø3.5 mm - L 18 mm RLT3.5L18 Non locking screw - Ø3.5 mm - L 18 mm
SLT3.5L20 Locking screw - Ø3.5 mm - L 20 mm RLT3.5L20 Non locking screw - Ø3.5 mm - L 20 mm
SLT3.5L22 Locking screw - Ø3.5 mm - L 22 mm RLT3.5L22 Non locking screw - Ø3.5 mm - L 22 mm
SLT3.5L24 Locking screw - Ø3.5 mm - L 24 mm RLT3.5L24 Non locking screw - Ø3.5 mm - L 24 mm
SLT3.5L26 Locking screw - Ø3.5 mm - L 26 mm RLT3.5L26 Non locking screw - Ø3.5 mm - L 26 mm
SLT3.5L28 Locking screw - Ø3.5 mm - L 28 mm RLT3.5L28 Non locking screw - Ø3.5 mm - L 28 mm
SLT3.5L30 Locking screw - Ø3.5 mm - L 30 mm RLT3.5L30 Non locking screw - Ø3.5 mm - L 30 mm
SLT3.5L32 Locking screw - Ø3.5 mm - L 32 mm RLT3.5L32 Non locking screw - Ø3.5 mm - L 32 mm
SLT3.5L34 Locking screw - Ø3.5 mm - L 34 mm RLT3.5L34 Non locking screw - Ø3.5 mm - L 34 mm
SLT3.5L36 Locking screw - Ø3.5 mm - L 36 mm RLT3.5L36 Non locking screw - Ø3.5 mm - L 36 mm
SLT3.5L38 Locking screw - Ø3.5 mm - L 38 mm RLT3.5L38 Non locking screw - Ø3.5 mm - L 38 mm
SLT3.5L40 Locking screw - Ø3.5 mm - L 40 mm RLT3.5L40 Non locking screw - Ø3.5 mm - L 40 mm
* Blue anodized * Fuchsia anodized

Ø4.0 MM SCREWS AND WASHERS (OPTIONAL)

LAG SCREW*
(AVAILABLE ONLY IN STERILE)
OPTIONAL IMPLANTS
Ref Description
Ref. Description
QLT3.5L20-ST Lag screw - Ø3.5 mm - L 20 mm - STERILE Self-drilling compressive screw Ø4.0 mm -
QLT3.5L22-ST Lag screw - Ø3.5 mm - L 22 mm - STERILE H1.4QT4.0Lxx-ST Cannulated Ø1.4 mm - short thread - STERILE
QLT3.5L24-ST Lag screw - Ø3.5 mm - L 24 mm - STERILE L26 mm to L48 mm (incrementation of 2 mm)
QLT3.5L26-ST Lag screw - Ø3.5 mm - L 26 mm - STERILE Self-drilling self-compressive Ø4.0 mm -
H1.4IFT4.0Lxx-ST Cannulated Ø1.4 mm - STERILE
QLT3.5L28-ST Lag screw - Ø3.5 mm - L 28 mm - STERILE
L26 mm to L48 mm (incrementation of 2 mm)
QLT3.5L30-ST Lag screw - Ø3.5 mm - L 30 mm - STERILE
QLT3.5L32-ST Lag screw - Ø3.5 mm - L 32 mm - STERILE WASH-T4 Washer
QLT3.5L34-ST Lag screw - Ø3.5 mm - L 34 mm - STERILE
QLT3.5L36-ST Lag screw - Ø3.5 mm - L 36 mm - STERILE
QLT3.5L38-ST Lag screw - Ø3.5 mm - L 38 mm - STERILE
QLT3.5L40-ST Lag screw - Ø3.5 mm - L 40 mm - STERILE

* Not anodized
IN ST R U M EN TS R EFE R EN CE S

Non-contractual pictures
FOOTMOTION PLATING SYSTEM INSTRUMENTS FOOTMOTION PLATING SYSTEM INSTRUMENTS

Ref. Description Qty Ref. Description Qty

ANC350 Ø4.5 mm AO quick coupling handle - Size 1 2 ANC577 Ø2.7 mm threaded guide gauge for Ø3.5 mm screws 2

ANC567 Ø16 mm convex reamer 1 ANC578 Bending plier 2

ANC568 Ø16 mm concave reamer 1 ANC586 Ø2.0 mm non threaded bent guide gauge for Ø2.8 mm screws 1

ANC569 Ø18 mm convex reamer 1 ANC589 Length gauge for Ø2.8 and Ø3.5 mm screws 1

ANC570 Ø18 mm concave reamer 1 ANC590 Ø2.0 mm quick coupling drill bit - L 125 mm 2

ANC571 Ø20 mm convex reamer 1 ANC591 Ø2.7 mm quick coupling drill bit - L 125 mm 2

ANC572 Ø20 mm concave reamer 1 ANC611 Ø3.0 mm quick coupling drill bit - L 125 mm 1

ANC573 Ø22 mm convex reamer 1 ANC642 Opening wedge osteotomy instrument 1

ANC574 Ø22 mm concave reamer 1 33.0212.070 Pin - Ø1.2 L70 mm 5

ANC575 T8 quick coupling screwdriver 2 33.0216.100 Pin - Ø1.6 L100 mm 5

ANC576 Ø2.0 mm threaded guide gauge for Ø2.8 mm screws 2 33.0216.150 Pin - Ø1.6 L150 mm 5

Brochure EN - Footmotion Plating System - Ed7 - 10/2018 - Medical device EC : class IIb - CE0120 SGS UK - US Class: II - Read labeling and instructions before use.
RACK
(ANC588/R)

Container Footmotion Plating

System - Flatfoot (ANC756)

BASE (ANC588/B)

ANC588/M2

ANC588/M2 ANC588/M6

ANC588/M1
ANC588/M7

ANC588/M4 ANC588/M8

IMPLANTS TRAY (+ Reamers)

ANC588/M2 (ANC588/I)

REMOVAL SET

If you have to remove FOOTMOTION PLATING SYSTEM implants, make sure to order the Newclip Technics removal set which includes the following
instruments:
- ANC350: Ø4.5 mm AO quick coupling handle - Size 1.
- ANC575: T8 quick coupling screwdriver

The information presented in this brochure is intended to demonstrate a NEWCLIP TECHNICS product. Always refer to the package insert, product label and/or user instructions
before using any NEWCLIP TECHNICS product. Surgeons must always rely on their own clinical judgment when deciding which products and techniques to use with their patients.
Products may not be available in all markets. Product availability is subject to the regulatory or medical practices that govern individual markets. Please contact your NEWCLIP
TECHNICS representative if you have questions about the availability of NEWCLIP TECHNICS products in your area.

NEWCLIP TECHNICS NEWCLIP USA NEWCLIP TECHNICS GmbH NEWCLIP TECHNICS Australia
PA de la Lande Saint Martin - 45 rue des Garottières 642 Larkfield Center , Pröllstraß 11, Forest Central Business Park
44115 Haute Goulaine (France) Santa Rosa CA 95403, USA D-86157 Augsburg, Deutschland Building 10 Level 1, 49 Frenchs Forest
Tél. : +33 (0)2 28 21 23 25 - Fax : +33 (0)2 40 63 68 37 Phone : + 1 707 230 5078 Phone : +49 (0)821 650 749 40 Rd, Frenchs Forest 2086, Australia
orders@newcliptechnics.com customerservice@newclipusa.com info@newclipgmbh.com Phone: +61 (0)2 81 886 110
www.newcliptechnics.com www.newclipusa.com www.newclipgmbh.de solutions@newclipaustralia.com
www.newcliptechnics.com