ORDER NO.

CRT3176
DEH-1650/XU/ES

HIGH POWER CD PLAYER WITH FM/AM TUNER

DEH-1650
DEH-1650B XU/ES
XU/ES, XU/CN

This service manual should be used together with the following manual(s):
Model No. Order No. Mech.Module Remarks

CX-3110 CRT3178 S10.1 CD Mech. Module : Circuit Description, Mech. Description, Disassembly

For details, refer to "Important symbols for good services".

PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2003
K-ZZA. OCT. 2003 printed in Japan
 1 2 3 4

SAFETY INFORMATION
A

This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer.
Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely
repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may void the
warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk
trying to do so and refer the repair to a qualified service technician.

- CD Section Precaution
1. Before disassembling the unit, be sure to turn off
the power. Unplugging and plugging the connectors
during power-on mode may damage the ICs inside
the unit.
C 2. To protect the pickup unit from electrostatic discharge
during servicing, take an appropriate treatment
(shorting-solder) by referring to "the DISASSEMBLY"
on page 47.
3. After replacing the pickup unit, be sure to check the
grating. (See p.44.)
4. In this product, because the memory capacity of the
microcomputer is insufficient, the test mode is not
installed. However grating of the pickup unit can be
confirmed.

2 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

[ Important symbols for good services ]

In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely.
When you find the procedures bearing any of the symbols, be sure to fulfill them: A
1. Product safety
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and
should keep the safety during servicing by following the safety instructions described in this manual.

2. Adjustments
To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable.
In accordance with the procedures or instructions described in this manual, adjustments should be performed.

3. Cleaning
For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning, B
proper cleaning should be performed to restore their performances.

4. Shipping mode and shipping screws

To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or
the shipping screws should be installed before shipping out in accordance with this manual, if necessary.

5. Lubricants, glues, and replacement parts

Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying
glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the
prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed
ones should be used.
C

DEH-1650/XU/ES 3
5 6 7 8
 1 2 3 4

CONTENTS
SAFETY INFORMATION ..................................................................................................................................... 2
1. SPECIFICATIONS ............................................................................................................................................ 6
A 2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 8
2.1 PACKING ................................................................................................................................................... 8
2.2 EXTERIOR............................................................................................................................................... 10
2.3 CD MECHANISM MODULE..................................................................................................................... 14
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 16
3.1 BLOCK DIAGRAM ................................................................................................................................... 16
3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE).............................................................................. 18
3.3 KEYBOARD UNIT.................................................................................................................................... 24
3.4 CD MECHANISM MODULE..................................................................................................................... 26
4. PCB CONNECTION DIAGRAM ..................................................................................................................... 30
4.1 TUNER AMP UNIT................................................................................................................................... 30
4.2 KEYBOARD UNIT.................................................................................................................................... 34
B
4.3 CD MECHANISM MODULE..................................................................................................................... 36
5. ELECTRICAL PARTS LIST ............................................................................................................................ 38
6. ADJUSTMENT ............................................................................................................................................... 42
6.1 FREQUENCY CHECK FOR CLOCK ....................................................................................................... 42
6.2 CD ADJUSTMENT................................................................................................................................... 43
6.3 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT .................................................... 44
6.4 ERROR MODE ........................................................................................................................................ 46
7. GENERAL INFORMATION ............................................................................................................................. 47
7.1 DIAGNOSIS ............................................................................................................................................. 47
7.1.1 DISASSEMBLY ..................................................................................................................................... 47
7.1.2 CONNECTOR FUNCTION DESCRIPTION .......................................................................................... 51
C 7.2 PARTS...................................................................................................................................................... 52
7.2.1 IC .......................................................................................................................................................... 52
7.2.2 DISPLAY ............................................................................................................................................... 59
7.3 OPERATIONAL FLOW CHART ............................................................................................................... 61
7.4 CLEANING............................................................................................................................................... 62
8. OPERATIONS ................................................................................................................................................ 63

4 DEH-1650/XU/ES
1 2 3 4
5 6 7 8

DEH-1650/XU/ES 5
5 6 7 8
 1 2 3 4

1. SPECIFICATIONS
A

6 DEH-1650/XU/ES
1 2 3 4
5 6 7 8

DEH-1650/XU/ES 7
5 6 7 8
 1 2 3 4

2. EXPLODED VIEWS AND PARTS LIST

NOTES : • Parts marked by " * " are generally unavailable because they are not in our Master Spare Parts List.
• Screw adjacent to mark on the product are used for disassembly.
"
A
• For the applying amount of lobricants or glue, follow the instructions in this manual.
(In the case of no amount instructions,apply as you think it appropriate.)
2.1 PACKING

5
6
B 17 3
4

8
2
9
7 11

12

16
C

15

10

1
14
D
13

E
(1) PACKING SECTION PARTS LIST
Mark No. Description Part No. Mark No. Description Part No.

1 Cord Assy CDE7060 11-1 Owner's Manual See Contrast table(2)

2 Spring CBH1650 11-2 Installation Manual See Contrast table(2)
3 Screw CBA1650 * 11-3 Warranty Card See Contrast table(2)
* 4 Polyethylene Bag CEG-127 12 Carton See Contrast table(2)
5 Screw CRZ50P090FTC 13 Contain Box See Contrast table(2)

6 Screw TRZ50P080FTC 14 Protector CHP2663

* 7 Polyethylene Bag CEG-158 15 Protector CHP2664
8 Handle CNC5395 16 Case Assy CXB3520
F 17 Accessory Assy CEA3439
9 Bush CNV3930
10 Polyethylene Bag CEG-162

8 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

(2) CONTRAST TABLE

DEH-1650/XU/ES, DEH-1650B/XU/ES and DEH-1650/XU/CN are constructed the same except for the following:
Mark NO Description DEH-1650/XU/ES DEH-1650B/XU/ES DEH-1650/XU/CN
11-1 Owner's Manual YRD5005 YRD5005 YRB5001 A
11-2 Installation Manual YRD5010 YRD5010 YRB5004
* 11-3 Warranty Card Not used Not used ARY7046
12 Carton YHG5007 YHG5008 YHG5011
13 Contain Box YHL5007 YHL5008 YHL5011

- Owner's Manual, Installation Manual

Model Part No. Language
DEH-1650/XU/ES YRD5005 English, Spanish, Portuguese(B), Traditional chinese, Arabic
DEH-1650B/XU/ES YRD5010 English, Spanish, Portuguese(B), Traditional chinese, Arabic B
DEH-1650/XU/CN YRB5001 Casual chinese
YRB5004 Casual chinese

DEH-1650/XU/ES 9
5 6 7 8
 1 2 3 4

2.2 EXTERIOR

10 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

(1) EXTERIOR SECTION PARTS LIST

Mark No. Description Part No. Mark No. Description Part No.
1 Screw BSZ26P060FTC 37 Connector(CN651) CKS3835
38 Antenna Jack(CN401) CKX1056 A
2 Screw BSZ30P060FTC
3 Screw BSZ30P200FTC 39 Holder CND1328
4 Cord Assy CDE7060 40 Heat Sink CNR1668
5 Cable CDE7113
41 FM/AM Tuner Unit CWE1646
6 Case CNB2793 42 Holder CND1054
7 Holder CNC8659 43 Holder YNC5004
8 Earth Plate CNC8915 44 Detach Grille Assy See Contrast table(2)
9 Insulator CNM8059 45 Screw BPZ20P100FZK
10 Insulator CNM8174
46 Spring CBH2210
B
11 Cushion CNM8890 47 Button(CD EJECT) YAC5001
12 Chassis Unit CXB9542 48 Button(CLOCK, EQ) YAC5004
13 Button CAC4836 49 Button(VOLUME+) See Contrast table(2)
14 Spring CBH1835 50 Button(VOLUME-) See Contrast table(2)
15 Spring CBH2208
51 Button(SRC) YAC5011
16 Spring CBH2367 52 Button(1-6) YAC5012
17 Bracket CNC6791 53 Button(LOUD) YAC5014
18 Holder CNC8042 54 Button(UP, DOWN) See Contrast table(2)
19 Cover CNM6276 55 Button(LEFT, RIGHT) See Contrast table(2)
20 Panel CNS7238
C
56 Button(A, BAND) YAC5021
21 Arm CNV4692 57 Button(DETACH) YAC5023
22 Arm CNV4728 58 Cover YNS5021
23 Arm CNV5576 59 Keyboard Unit See Contrast table(2)
24 Screw IMS20P030FZK 60 LCD(LCD1801) See Contrast table(2)
25 CD Mechanism Module(S10.1) CXK5602
61 Connector(CN1801) CKS3580
26 Screw ISS26P055FTC 62 Sheet CNM7932
27 Panel See Contrast table(2) 63 Lens CNV7060
28 Tuner Amp Unit See Contrast table(2) 64 Connector CNV7369
29 Screw ASZ26P060FTC 65 Holder YNC5001
D
30 Screw BPZ26P080FTC
66 Lighting Conductor YNV5001
31 Screw BSZ26P160FTC 67 Connector YNV5003
32 Fuse(10A) CEK1208 68 Grille Unit See Contrast table(2)
33 Pin Jack(CN352) CKB1057 69 Sheet See Contrast table(2)
34 Terminal(CN402) CKF1059 70 Transistor(Q911, 921, 991) 2SD2396
35 Plug(CN901) CKM1376
71 IC(IC302) PAL007A
36 Connector(CN831) CKS3581

DEH-1650/XU/ES 11
5 6 7 8
 1 2 3 4

(2) CONTRAST TABLE

DEH-1650/XU/ES, DEH-1650B/XU/ES and DEH-1650/XU/CN are constructed the same except for the following:
A Mark NO Description DEH-1650/XU/ES DEH-1650B/XU/ES DEH-1650/XU/CN
27 Panel YNS5022 YNS5022 YNS5029
28 Tuner Amp Unit YWM5011 YWM5017 YWM5021
44 Detach Grille Assy YXA5020 YXA5022 YXA5024
49 Button(VOLUME+) YAC5006 YAC5006 YAC5005
50 Button(VOLUME-) YAC5009 YAC5009 YAC5008

54 Button(UP, DOWN) YAC5016 YAC5016 YAC5015

55 Button(LEFT, RIGHT) YAC5019 YAC5019 YAC5018
59 Keyboard Unit YWM5012 YWM5018 YWM5022
60 LCD(LCD1801) CAW1801 YAW5003 YAW5004
B 68 Grille Unit YXA5003 YXA5008 YXA5011

69 Sheet Not used CNM7881 Not used

12 DEH-1650/XU/ES
1 2 3 4
5 6 7 8

DEH-1650/XU/ES 13
5 6 7 8
 1 2 3 4

2.3 CD MECHANISM MODULE

5
42
A 13 81
5 34
15 22
E
5
13 F

93

13 92
A 26
B 82
44 G

5 13 86 83
C 68
D
B 1 54 52
53 86 28 I H
4
37 28

4 71 45
23 J
1
55 87
4 36 38
4 50
73
1
23
18 29 72
K
2
64 51 10 75
C 47 1
I 76 B 59
2
24 1 49
7
61 E
77 90
M F
2 1 48
63 Q
A 27
1
2 H 8
G J 67
21 L
M
1 N D
57 R O
16 17
79 12
D 1
58 3 78
1 33
2 P 46
62 2 20 60
80
40 6
1 1
N
60
1GEM1024 39
11
1
2GEM1045 1 89
25
69 43 10
3GEM1035 P L
30 70 K
56 19
E 14
74
41
R
31 85

C Q

91 14
C 65 35
1 O
85
31
3 2
F 66

85

14 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

CD MECHANISM MODULE SECTION PARTS LIST

Mark No. Description Part No. Mark No. Description Part No.
1 CD Core Unit(S10.1) CWX2947
51 Gear CNV7208 A
2 Connector(CN101) CKS4182
3 Connector(CN701) CKS4188 52 Gear CNV7209
4 Screw BMZ20P035FTC 53 Gear CNV7210
5 Screw BSZ20P040FTC 54 Gear CNV7211
55 Gear CNV7212
6 Screw(M2x4) CBA1362
7 Screw(M2x3) CBA1511 56 Rack CNV7214
8 Screw(M2x3) CBA1527 57 Arm CNV7215
9 ••••• 58 Arm CNV7216
10 Washer CBF1038 59 Guide CNV7217
60 Roller CNV7218
B
11 Washer CBF1060
12 Spring CBH2390 61 Gear CNV7219
13 Spring CBH2606 62 Arm CNV7221
14 Spring CBH2607 63 Arm CNV7220
15 Spring CBH2608 64 Arm CNV7222
65 Damper CNV7313
16 Spring CBH2609
17 Spring CBH2610 66 Damper CNV7314
18 Spring CBH2735 67 Arm CNV7341
19 Spring CBH2612 68 Arm CNV7342
20 Spring CBH2613 69 Guide CNV7360
C
70 Guide CNV7361
21 Spring CBH2614
22 Spring CBH2615 71 Holder CNV7437
23 Spring CBH2616 72 Arm CNV7805
24 Spring CBH2617 73 Gear CNV7595
25 Spring CBH2620 74 Damper CNV7618
75 Motor Unit(M1) CXB6007
26 Spring CBH2621
27 Spring CBH2641 76 Chassis Unit CXC2318
28 Spring CBH2642 77 Screw Unit CXB8729
29 Spring CBH2643 78 Gear Unit CXC2397
D
30 Spring CBH2659 79 Arm Unit CXC2316
80 Arm CND1896
31 Spring CBH2688
32 ••••• 81 Arm CND1894
33 Shaft CLA4441 82 Motor Unit(M2) CXB8933
34 Frame CNC9962 83 Bracket CNC9985
35 Frame CNC9963 84 •••••
85 Screw(M2x5) EBA1028
36 Bracket CNC9966
37 Bracket CND1895 86 Screw JFZ20P020FTC
38 Arm CNC9968 87 Screw JGZ17P022FTC E
39 Arm CND1909 88 •••••
40 Lever CND2032 89 Washer YE20FTC
90 Pickup Unit(P10)(Service) CXX1647
41 Lever CNC9984
42 Sheet CNM8134 91 Screw IMS26P030FTC
43 Collar CNV7798 92 Spring CBL1635
44 Guide CNV7799 93 Clamper CNV7197
45 Arm CNV7800

46 Rack CNV7199
47 Holder CNV7201 F
48 Holder CNV7202
49 Arm CNV7203
50 Gear CNV7207
DEH-1650/XU/ES 15
5 6 7 8
 1 2 3 4

3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM

3.1 BLOCK DIAGRAM
A

A TUNER AMP UNIT

VDD

7 6 13 5 10 9 8 11 14 18 19 20 21
FM/AM TUNER UNIT

WC
CE2

ROM_VDD

SL

DI
CK
CE1

NC

DO

NC

NC

NC

NC
IC 3 EEPROM IC 5
B
←
5.0V 5V 3.3V

OSC LPF

ANTENNA CN401
AM ANT FMRF
1
1 ATT
2 Rch
24
IC 2
2.5V
FM ANT IC 1
3 3.3V
ATT Lch
23
FMRF MIXER, IF AMP DET, FM MPX,
RDS DECODER
RF adj
ANT adj

T51 CF52
CF51

C
AUDIOGND
OSCGND

IC 4
VDD_3.3
RFGND

DGND

←
3.3V 3.3V 2.5V 2.5V
VCC
NC

2 12 15 22 16 4 17

TUN 3V TUN L 2

VCC

CD L 3

VST,VCK,VDT

PICKUP UNIT
D (SERVICE)(P10) C
D CD CORE UNIT(S10.1) mute
48

70
X1
CN101 CN701 X601
LASER Q101 CN651 69
DIODE LD+ 1 20 LOUT X2
14 3R3V LD LOUT 8 14

MD 2 23 43
5 PD SYSPW
xtal

AC, F, E, BD X201 SYSTEM CONTROLLER

HOLOGRAM
24
UNIT SERVO XTAL
FOP FOP
CONTROL,
FOCUS ACT.
TOP
1 DSP,
TOP
MONITOR TRACKING ACT. 4 LPF, DAC IC 601(2/2)
DIODE IC 652 PE5330C
12 XSI 2 4 16
IC 201 SO 16 6 XSI
12 FD, TD, SD, MD
FOP UPD63712AGC 29
13 LOEJ
TOP 42 28
LIMIT TC7SET08FU CONT
SPINDLE
ACT,MOTOR 79
MOTOR M DRIVER DSCSNS
HOME CLMP 27
16 CLAMPSW
SOP
15 78 VDSENS
SOM
17
LOADING/ CARRIAGE LCOM
M 18 22 LOEJ
VDCONT

MOTOR LCOP LOEJ 5 17

swvdd
DSENS

ILMPW

Q
KYDT

DPDT

E CONT
9 CONT
7 15 B.UP
41 8 65 9 21 22
IC 301
BA5996FP
DSCSNS Q
6 16
Q
CLMP
11 11
VDD
VDSENS Q991
VD
CLAMP VD 2 20 B.UP
12EJ 8EJ DSCSNS 1 21
3.3V REGULATOR
3 1
3R3V
IC 701 Q992

NJM2391DL1-33

16 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

RESET
1 IC 961 2
VDD
S-80834CNY

CN352 PRE OUT

60 RL RL 2
reset RL
Q352

CE2 55
TUNPCE2
CE1 56
TUNPCE1
DO 11
TUNPDI
DI 12
TUNPDO B
CK 13
TUNPCK VDD REGULATOR
Q911
76 SL VDD
Q912

SYSTEM CONTROLLER
IC 601(1/2) 32
PE5330C DALMON
CN901

BACKUP SENSE B.UP

64 FUSE
BSENS 16 16 BACK UP
10A
Q931
63 ACC
ASENS 14 14 ACC

ACC SENSE

C
15 15 GND

B.UP
ELECTRONIC VOLUME/
SOURCE SELECTOR POWER AMP 6,20
TUN L 2 IN1-L
23
FL- 7 7 FL-
21
IC 151 10 14 IC 302 FL+ 5 5 FL+
FL FLIN PAL007A 3
PML003AM 11 12 RL- 8 8 RL-
RL RLIN 5
CD L 3 IN2-L RL+ 6 6 RL+
MUTE STBY B.REMOTE
22 4 25
11 11 B.REM
VST,VCK,VDT MUTE
Q453
SYS 8.4V REGULATOR
Q921 Q922
VCC B.UP
MUTE
Q452
48
ute

70
D
X1 Q923
X601
69
X2

43 SYSPW
PW

TUNER 3.3V REGULATOR

IC 981
3 1
TUN 3V VCC

NJM2391DL1-33

B KEYBOARD UNIT
CN831 CN1801
Q821

B.UP
ILM
7 7
ILL E

Q822
Q801
SWDVDD SW5V
VDD 5 5

DPDT DPDT
4 4
56 10
VLCD
VDD

DSENS DSENS KEY MATRIX

8 8 KEY DATA
18
DPDT LCD DRIVER/
KYDT KYDT KEY CONTROLLER
3 3
20 IC 1801
KTDT PD6340A LCD

DEH-1650/XU/ES 17
5 6 7 8
 1 2 3 4

3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)

Note: When ordering service parts, be sure to refer to " EXPLODED VIEWS AND PARTS LIST" or
A "ELECTRICAL PARTS LIST".

Large size
SCH diagram
A-a
A-a A-b

C CN701

A-a A-b Guide page

A-a A-b Detailed page

B CD:+0.35dBs

FM:-15.5dBs
AM:-30.0dBs

C
FM/AM TUNER UNIT

PE5330C

SYSTEM CONTROLLER
D

E
B

For resistors and capacitors in the circuit diagrams, their resistance values or
capacitance values are expressed in codes:
CN1801

Ex. *Resistors
Code Practical value
123 12k ohms
103 10k ohms

*Capacitors
Code Practical value
103 0.01uF
101/10 100uF/10V

The > mark found on some component parts indicates

the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of
identical designation.
F

A
18 DEH-1650/XU/ES
1 2 3 4
5 6 7 8

A-b
A TUNER AMP UNIT

>
REAR
L CH
3A
REAR
R CH
FM: +3.6dBs
AM: -6.9dBs B
CD:+10.45dBs

332/16
PAL007A

FM: +29.6dBs
AM: +27.1dBs
CD:+36.45dBs

FUSE
CEK1208
10A

600µH
>

A
DEH-1650/XU/ES 19
5 6 7 8
 1 2 3 4

A-b 1 2

CD:+0.35dBs

PE5330C
CN701
C

C
A-a A-b

E
FM:-15.5dBs
AM:-30.0dBs

F
FM/AM TUNER UNIT

A-a
20 DEH-1650/XU/ES
1 2 3 4
 PE5330C

TUNER UNIT
5

5
SYSTEM CONTROLLER

6
6

DEH-1650/XU/ES
For resistors and capacitors in the circuit diagrams, their resistance values or
B
3

capacitance values are expressed in codes:

7
7

Ex. *Resistors
Code Practical value
CN1801

123 12k ohms

103 10k ohms

*Capacitors
Code Practical value
103 0.01uF
101/10 100uF/10V

The > mark found on some component parts indicates

the importance of the safety factor of the part.
8

8
Therefore, when replacing, be sure to use parts of
identical designation.

A-a A-b

A-a
A-b

21
E
A

D
C

F
B
 F
E
B
A

D
C

22
A-a A-b

A-b
1
1

A TUNER AMP UNIT

1
>
REAR
L CH
3A

2
2

REAR
R CH
FM: +3.6dBs
AM: -6.9dBs
CD:+10.45dBs

332/16

2
DEH-1650/XU/ES
3
3

PAL007A

4
4

FM: +29.6dBs
AM: +27.1dBs
CD:+36.45dBs

FUSE
CEK1208
10A

600µH
>
 AM: +27.1dBs
CD:+36.45dBs

FUSE
CEK1208
10A

600µH
>
5

5
6
6

DEH-1650/XU/ES
3

7
7
8

8
A-a A-b

A-b
23
E
A

D
C

F
B
 1 2 3 4

3.3 KEYBOARD UNIT

For resistors and capacitors in the circuit diagrams, their resistance values or
capacitance values are expressed in codes:

Ex. *Resistors
Code Practical value
123 12k ohms D1803-1809
ILM COLOUR IL1801,1802
103 10k ohms
DEH-1650/XU/ES
*Capacitors
DEH-1650B/XU/ES
Code Practical value
B 103 0.01uF DEH-1650/XU/CN
101/10 100uF/10V

B
24 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

D1803-1809 R1816-1818 LCD1801

CAW1801

YAW5003

YAW5004
B KEYBOARD UNIT B

A CN831
40mA, 14V

E
CL-490S-WF-SD CL-490S-WF-SD

B
DEH-1650/XU/ES 25
5 6 7 8
 1 2 3 4

3.4 CD MECHANISM MODULE

PICKUP UNIT(P10)(SERVICE)

B
F F

T T

T T

F F F

T T RF
T T F

F F T

F F T

R1
C

R1
!

1
D 9

MOTOR DRIVER
@

S
M1 T
CXB6007
SPINDLE MOTOR 7 5
S C

S F

E 8
C
6
C
3
M2
CXB8933
LOADING/CARRIAGE F
MOTOR F
T
T
C

C
S
S

BA5835FP

3.3V REGULATOR

F
R1

C
26 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

A
C CD CORE UNIT(S10.1)

F
S

B
C

F
S

RF AMP / SERVO / DSP / DAC / LPF

SIGNAL LINE
F FOCUS SERVO LINE
T TRACKING SERVO LINE
C CARRIAGE SERVO LINE
S SPINDLE SERVO LINE C

SWITCHES:
CD CORE UNIT (S10.1)
S901 : HOME SWITCH.........ON-OFF
S902 : CLAMP SWITCH.......ON-OFF
S903 : DSCSNS SWITCH.....ON-OFF
S904 : 12EJ SWITCH............ON-OFF
S905 : 8EJ SWITCH..............ON-OFF
The underlined indicates the switch position.

9 D

4
A
CN651
2

5
C

E
6
3
$%
C

C
DEH-1650/XU/ES 27
5 6 7 8
 1 2 3 4

- Waveforms Note : 1. The encircled numbers denote measuring points in the circuit diagram.
2. Reference voltage REFO1(1.65V)
A
1 DSCSNS 5V/div 500ms/div 1 DSCSNS 5V/div 500ms/div 5 SIN 1V/div 2s/div
2 CLCONT 5V/div 2 CLCONT 5V/div 6 CIN 500mV/div
3 LOEJ 5V/div 3 LOEJ 5V/div 7 TIN 500mV/div
4 VD 10V/div 4 VD 10V/div When setting up after loading a 12cm CD-DA
When loading a 12cm CD When loading an 8cm CD disc

Ref.: Ref.: Ref.:

GND GND REFO

Mode: Mode: Mode:

B Normal Normal Normal

8 FIN 200mV/div 500ms/div 0 TE 500mV/div 200ms/div ! FE 500mV/div 20ms/div

9 RFOK 2V/div ! FE 500mV/div 8 FIN 500mV/div
5 SIN 2V/div 0 TE 500mV/div
7 TIN 500mV/div
When setting up "Source On"(12cm CD-DA) When setting up "Source On" During "Play"(CD-DA)

Ref.: Ref.: Ref.:

C REFO REFO REFO

Mode: Mode: Mode:

Normal Normal Normal

@ MDX 500mV/div 5ms/div @ MDX 500mV/div 5µs/div # RFAGC 500mV/div 0.5µs/div

5 SIN 1V/div 5 SIN 1V/div

Spindle waveform during "Play" Spindle waveform during "Play"(Magnified) RF eye pattern
D

Ref.: Ref.: Ref.:

REFO REFO REFO

Mode: Mode: Mode:

Normal Normal Normal

8 FIN 500mV/div 200ms/div 0 TE 500mV/div 2ms/div # RFAGC 1V/div 500µs/div

! FE 500mV/div # RFAGC 500mV/div 0 TE 500mV/div
E 7 TIN 500mV/div

Focus Search When "Tracking Open" 1 Track Jump

Ref.: Ref.: Ref.:

REFO REFO REFO

Mode: Mode: Mode:

TEST TEST TEST

28 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

A
# RFAGC 1V/div 500ms/div # RFAGC 1V/div 5ms/div # RFAGC 1V/div 500µs/div
0 TE 500mV/div 0 TE 500mV/div 7 TIN 1V/div
7 TIN 500mV/div 7 TIN 500mV/div 0 TE 1V/div
8 FIN 1V/div
32 Track Jump 100(32x3) Track Jump When reproducing black dots(1mm)

Ref.: Ref.: Ref.:

REFO REFO REFO

Mode: Mode: Mode:

TEST TEST Normal B

# RFAGC 1V/div 500µs/div # RFAGC 1V/div 5ms/div # RFAGC 1V/div 500µs/div

0 TE 1V/div 0 TE 1V/div 0 TE 1V/div
6 CIN 500mV/div 6 CIN 500mV/div 6 CIN 500mV/div
5 SIN 2V/div 5 SIN 2V/div 5 SIN 2V/div
During inside/outside search
When reproducing scratch(1mm) When reproducing fingerprint(65µm) (outer circumference → inner circumference)

Ref.: Ref.: Ref.:

REFO REFO REFO C

Mode: Mode: Mode:

Normal Normal Normal

$ LOUT 1V/div 200µs/div 1 DSCSNS 5V/div 200ms/div 1 DSCSNS 5V/div 200ms/div

% ROUT 1V/div 2 CLCONT 5V/div 2 CLCONT 5V/div
3 LOEJ 5V/div 3 LOEJ 5V/div

Analog Audio When "Eject"(12cm CD) When "Eject"(8cm CD)

D

Ref.: Ref.: Ref.:

AGND GND GND

Mode: Mode: Mode:

Normal Normal Normal

DEH-1650/XU/ES 29
5 6 7 8
 1 2 3 4

4. PCB CONNECTION DIAGRAM

4.1 TUNER AMP UNIT
A

A TUNER AMP UNIT CORD ASSY

NOTE FOR PCB DIAGRAMS

1.The parts mounted on this PCB
include all necessary parts for
several destination.
For further information for
respective destinations, be sure
to check with the schematic dia-
B gram.
2.Viewpoint of PCB diagrams
Connector Capacitor

SIDE A

SIDE B
P.C.Board Chip Part

C CN701
E

A B
30 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

SIDE A
REAR OUTPUT ANTENNA JACK

FM/AM TUNER UNIT

B CN1801 FRONT
A
DEH-1650/XU/ES 31
5 6 7 8
 1 2 3 4

A A TUNER AMP UNIT

A
32 DEH-1650/XU/ES
1 2 3 4
5 6 7 8

SIDE B A

A
DEH-1650/XU/ES 33
5 6 7 8
 1 2 3 4

4.2 KEYBOARD UNIT

A B KEYBOARD UNIT SIDE A

B KEYBOARD UNIT SIDE B

BAND BAND
AUDIO

]
]
'
EJECT EJECT

'
'

'

[
B
[

LOUD
LOCAL/BSM

C
6
5
4

D
A CN831
3
2
1

E
SOURCE
VOL-

VOL-
VOL+
VOL+

EQ
EQ

F
CLOCK

B
34 DEH-1650/XU/ES
1 2 3 4
5 6 7 8

DEH-1650/XU/ES 35
5 6 7 8
 1 2 3 4

4.3 CD MECHANISM MODULE

A C CD CORE UNIT(S10.1) SIDE A

M2
B LOADING
/CARRIAGE
MOTOR

M1
SPINDLE
MOTOR

A
PICKUP UNIT(P10)(SERVICE)

CN651

HOME

C
36 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

C CD CORE UNIT(S10.1) SIDE B A

8EJ 12EJ

DSCSNS

CLAMP

C
DEH-1650/XU/ES 37
5 6 7 8
 1 2 3 4

5. ELECTRICAL PARTS LIST

A
NOTE:
• Parts whose parts numbers are omitted are subject to being not supplied.
• The part numbers shown below indicate chip components.
Chip Resistor
RS1/_S___J,RS1/__S___J
Chip Capacitor (except for CQS.....)
CKS....., CCS....., CSZS.....
Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
D 991 Diode HZS9L(B1)

A
L 151 Inductor LAU2R2K
L 401 Inductor LAU1R0K
Unit Number:YWM5011(DEH-1650/XU/ES) L 402 Inductor LAU1R0K
L 404 Ferri-Inductor LAU4R7K
Unit Number:YWM5017(DEH-1650B/XU/ES) L 601 Inductor LAU1R0K
Unit Number:YWM5021(DEH-1650/XU/CN)
Unit Name:Tuner Amp Unit L 801 Inductor LAU2R2K
L 901 Choke Coil 600µH CTH1280
X 601 Radiator 12.58291MHz CSS1402
MISCELLANEOUS
FU352 Fuse 3A CEK1286
AR401 Surge Protector DSP-201M-S00B
IC 151 IC PML003AM
IC 302 IC PAL007A
Fuse 10A CEK1208
C IC 601 IC PE5330C
FM/AM Tuner Unit CWE1646
IC 652 IC TC7SET08FU
IC 961 IC S-80834CNY
RESISTORS
IC 981 IC NJM2391DL1-33
Q 352 Transistor IMH3A R 153 RS1/16S101J
Q 452 Transistor DTC124EU R 154 RS1/16S101J
Q 453 Transistor DTA124EU R 155 RS1/16S101J
Q 801 Transistor 2SA1036K R 156 RS1/16S101J
R 157 RAB4C102J
Q 821 Transistor 2SA1036K
Q 822 Transistor DTC114EU R 301 RD1/4PU153J
Q 911 Transistor 2SD2396 R 353 RS1/16S821J
Q 912 Transistor IMD2A R 354 RS1/16S821J
D
Q 921 Transistor 2SD2396 R 357 RS1/16S223J
R 358 RS1/16S223J
Q 922 Transistor 2SB1243
Q 923 Transistor DTC114EU R 405 RS1/16S681J
Q 931 Transistor IMX1 R 407 RS1/16S681J
Q 991 Transistor 2SD2396 R 408 RS1/16S681J
Q 992 Transistor IMD2A R 409 RS1/16S681J
R 410 RS1/16S681J
D 452 Diode DAN202U
D 831 Diode 1SS133 R 414 RS1/16S0R0J
D 832 Diode 1SS133 R 420 RS1/16S681J
D 833 Diode 1SS133 R 421 RS1/16S473J
D 834 Diode 1SS133 R 454 RS1/16S103J
E
R 455 RS1/16S153J
D 835 Diode 1SS133
D 836 Diode 1SS133 R 456 RS1/16S221J
D 901 Diode S5688G R 457 RD1/4PU681J
D 902 Diode S5688G R 601 RS1/16S473J
D 911 Diode S5688G R 602 RS1/16S473J
R 603 RS1/16S103J
D 912 Diode HZS6L(B2)
D 921 Diode HZS9L(B3) R 604 RS1/16S103J
D 931 Diode HZS7L(C3) R 605 RS1/16S221J
D 932 Diode HZS7L(A1) R 606 RS1/16S104J
D 971 Diode S5688G R 607 RD1/4PU222J
R 608 RS1/16S0R0J
F
D 972 Diode S5688G
D 981 Diode S5688G R 609 RD1/4PU473J
D 982 Diode S5688G R 610 RD1/4PU681J
D 983 Diode S5688G R 611 RS1/16S473J
38 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
R 633 RS1/16S104J C 304 CFTNA224J50
R 653 RS1/16S104J C 309 CKSQYB225K10
A
R 654 RS1/16S102J C 310 CKSQYB225K10
R 661 RS1/16S221J C 312 CEJQ100M16
R 801 RS1/16S153J C 313 CKSRYB104K16
R 802 RS1/16S153J C 353 CEJQ2R2M50
R 803 RS1/16S222J C 354 CEJQ2R2M50

R 821 RD1/4PU222J C 401 CKSRYB103K50

R 823 RS1/16S103J C 402 CKSRYB103K50
R 833 RD1/4PU222J C 403 CEJQ470M6R3
R 834 RD1/4PU222J C 404 CEJQ101M10
R 836 RD1/4PU104J C 405 CKSRYB103K50

R 837 RD1/4PU103J C 420 CCSRCH470J50 B

R 838 RD1/4PU102J C 451 CEJQ330M10
R 841 RS1/16S1R0J C 601 CKSRYB103K50
R 848 RD1/4PU102J C 604 CCSRCH200J50
R 851 RD1/4PU102J C 605 CCSRCH200J50

R 911 RS1/16S223J C 610 CEJQ4R7M35

R 912 RD1/4PU152J C 611 CKSRYB224K16
R 921 RS1/16S0R0J C 654 CKSRYB104K16
R 923 RD1/4PU681J C 801 CKSRYB104K16
R 924 RD1/4PU122J C 901 3300µF/16V CCH1494

R 925 RS1/16S103J C 911 CEJQ470M10

R 931 RS1/16S473J C 912 CKSRYB103K50 C
R 932 RS1/16S104J C 913 470µF/16V CCH1331
R 933 RD1/4PU102J C 921 330µF/16V CCH1326
R 934 RS1/16S472J C 922 CEJQ101M16

R 935 RS1/16S473J C 923 CKSRYB103K50

R 936 RS1/16S223J C 961 CKSRYB473K50
R 940 RS1/16S104J C 963 CEJQ100M16
R 941 RS1/16S104J C 981 CKSYB475K10
R 955 RS1/16S473J C 982 CKSRYB103K50

R 961 RS1/16S102J C 983 CEJQ220M16

R 962 RS1/16S822J C 991 CKSRYB473K50
R 981 RD1/4PU1R8J C 992 CEJQ101M10 D
R 991 RD1/4PU221J
R 992

R 993
RD1/4PU221J

RS1/16S222J
B
Unit Number:YWM5012(DEH-1650/XU/ES)
R 994 RS1/16S472J
Unit Number:YWM5022(DEH-1650/XU/CN)
CAPACITORS Unit Name:Keyboard Unit
C 151 CKSRYB224K16 MISCELLANEOUS
C 152 CKSRYB224K16
C 153 CKSRYB105K10 IC 1801 IC PD6340A
C 154 CKSRYB105K10 D 1801 Diode MA152WK
C 155 CEJQ4R7M35 D 1802 Diode MA152WA E
D 1803 LED SML-310PT
C 156 CEJQ4R7M35 D 1804 LED SML-310PT
C 157 CKSRYB153K50
C 158 CKSRYB153K50 D 1805 LED SML-310PT
C 161 CCSRCH100D50 D 1806 LED SML-310PT
C 162 CCSRCH100D50 D 1807 LED SML-310PT
D 1808 LED SML-310PT
C 163 CCSRCH100D50 D 1809 LED SML-310PT
C 164 CCSRCH100D50
C 165 CKSRYB104K16 D 1810 LED CL-490S-WF-SD
C 166 CEJQ470M10 D 1811 LED CL-490S-WF-SD
C 167 CEJQ100M16 X 1801 Ceramic Resonator 5.00MHz CSS1547
IL 1801 Lamp 40mA,14V CEL1651 F
C 301 CFTNA224J50 IL 1802 Lamp 40mA,14V CEL1651
C 302 CFTNA224J50
C 303 CFTNA224J50 LCD1801 LCD(DEH-1650/XU/ES) CAW1801

DEH-1650/XU/ES 39
5 6 7 8
 1 2 3 4

Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
LCD(DEH-1650/XU/CN) YAW5004 R 1807 RS1/16S151J
R 1808 RS1/16S181J
A RESISTORS R 1809 RS1/16S181J
R 1810 RS1/16S181J
R 1801 RS1/16S222J
R 1802 RS1/16S222J R 1811 RS1/16S151J
R 1803 RS1/16S471J R 1812 RS1/16S181J
R 1804 RS1/16S471J R 1813 RS1/16S181J
R 1805 RS1/16S471J R 1814 RS1/16S181J
R 1815 RS1/16S151J
R 1806 RS1/16S471J
R 1807 RS1/16S151J R 1816 RS1/16S181J
R 1808 RS1/16S181J R 1817 RS1/16S181J
R 1809 RS1/16S181J R 1818 RS1/16S181J
R 1810 RS1/16S181J R 1819 RS1/16S131J
B R 1820 RS1/16S131J
R 1811 RS1/16S151J
R 1812 RS1/16S181J CAPACITORS
R 1813 RS1/16S181J
R 1814 RS1/16S181J C 1801 CKSRYB103K50
R 1815 RS1/16S151J C 1811 CKSRYF104Z25
C 1812 CKSRYF104Z25
R 1816 RS1/16S151J
R
R
R
1817
1818
1819
RS1/16S151J
RS1/16S151J
RS1/16S131J
C
Unit Number:CWX2947
R 1820 RS1/16S131J
Unit Name:CD CORE UNIT(S10.1)
C CAPACITORS
MISCELLANEOUS
C 1801 CKSRYB103K50
C 1811 CKSRYF104Z25 IC 201 IC UPD63712AGC
C 1812 CKSRYF104Z25 IC 301 IC BA5835FP
IC 701 IC NJM2391DL1-33

B
Q 101 Transistor 2SB1132
D 101 Diode 1SS355
Unit Number:YWM5018(DEH-1650B/XU/ES)
D 701 Diode 1SR154-400
Unit Name:Keyboard Unit X 201 Ceramic Resonator 16.934MHzCSS1603
S 901 Switch(HOME) CSN1051
MISCELLANEOUS S 902 Switch(CLAMP) CSN1051
D S 903 Spring Switch(DSCSNS) CSN1052
IC 1801 IC PD6340A
D 1801 Diode MA152WK S 904 Switch(12EJ) CSN1051
D 1802 Diode MA152WA S 905 Switch(8EJ) CSN1051
D 1803 LED SML-310VT
D 1804 LED SML-310VT RESISTORS
D 1805 LED SML-310VT R 101 RS1/10S1R5J
D 1806 LED SML-310VT R 102 RS1/10S1R5J
D 1807 LED SML-310VT R 103 RS1/10S1R5J
D 1808 LED SML-310VT R 104 RS1/10S1R5J
D 1809 LED SML-310VT R 105 RS1/10S1R5J

E D 1810 LED CL-490S-WF-SD R 201 RS1/16S102J

D 1811 LED CL-490S-WF-SD R 202 RS1/16S1002D
X 1801 Ceramic Resonator 5.00MHz CSS1547 R 203 RS1/16S1002D
IL 1801 Lamp 40mA,14V CEL1662 R 204 RS1/16S1002D
IL 1802 Lamp 40mA,14V CEL1662 R 205 RS1/16S1002D

LCD1801 LCD YAW5003 R 206 RS1/16S1002D

R 207 RS1/16S1002D
RESISTORS R 208 RS1/16S1002D
R 209 RS1/16S1002D
R 1801 RS1/16S222J R 214 RS1/16S103J
R 1802 RS1/16S222J
R 1803 RS1/16S471J R 215 RS1/16S393J
F R 1804 RS1/16S471J R 216 RS1/16S122J
R 1805 RS1/16S471J R 217 RS1/16S562J
R 218 RS1/16S472J
R 1806 RS1/16S471J R 234 RS1/16S0R0J

40 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

Circuit Symbol and No. Part No. Circuit Symbol and No. Part No.
C 305 CKSRYB103K25
R 235 RS1/16S103J
R 236 RS1/16S103J C 306 CKSRYB104K16 A
R 301 RS1/16S183J C 501 CKSRYB103K25
R 302 RS1/16S822J C 502 CKSRYB103K25
R 303 RS1/16S183J C 702 100µF/16V CCH1504
C 703 CKSRYB104K16
R 304 RS1/16S822J
R 305 RS1/16S183J C 705 10µF/6.3V CCH1470
R 306 RS1/16S183J
R 307 RS1/16S183J Miscellaneous Parts List
R 308 RS1/16S183J
Pickup Unit(P10)(Service) CXX1647
R 501 RS1/16S102J M 1 Motor Unit(SPINDLE) CXB6007
R 503 RS1/16S102J M 2 Motor Unit(LOADING/CARRIAGE)CXB8933
R 505 RS1/16S102J B
R 506 RS1/16S221J
R 507 RS1/16S221J

R 508 RS1/16S221J
R 509 RS1/16S221J
R 601 RS1/16S101J
R 602 RS1/16S101J
R 603 RS1/16S0R0J

R 901 RS1/16S104J
R 902 RS1/16S473J
R 903 RS1/16S273J
C
CAPACITORS

C 101 CKSRYB104K16
C 102 CKSRYB104K16
C 103 100µF/16V CCH1504
C 104 47µF/6.3V CCH1506
C 108 CKSRYB104K16

C 109 CKSRYB104K16
C 201 CKSRYB104K16
C 202 CKSRYB471K50
C 205 22µF/6.3V CCH1507
C 206 CKSRYB103K25 D

C 207 CKSRYB104K16
C 209 CKSRYB104K16
C 210 CKSRYB104K16
C 211 CKSRYB104K16
C 212 CKSRYB104K16

C 213 CKSRYB332K50
C 214 CKSRYB473K25
C 215 CKSRYB104K16
C 216 CKSRYB103K25
C 217 CCSRCH560J50
E
C 218 CCSRCH5R0C50
C 219 CKSRYB104K16
C 220 CKSRYB104K16
C 221 CKSRYB104K16
C 222 CKSRYB103K25

C 223 CCSRCH680J50
C 224 CCSRCH470J50
C 225 CKSRYB682K50
C 231 CKSRYB102K50
C 232 CKSRYB102K50

C 301 100µF/16V CCH1504 F

C 302 CCSRCH221J50
C 303 CCSRCH221J50
C 304 CKSRYB472K50

DEH-1650/XU/ES 41
5 6 7 8
 1 2 3 4

6. ADJUSTMENT
6.1 FREQUENCY CHECK FOR CLOCK
A

- Adjustment Point

ACC

BACK UP +14.4V
DC Regulated
GND GND Power Supply

TUNER AMP UNIT(SIDE B)

IC601

5V

Frequency Counter
D

E No. Specification Measuring Point Note

1. ACC, B.UP ON
1 786,432±31.5Hz IC601 14pin(PCL)
2. IC601 15pin : 5V

42 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

6.2 CD ADJUSTMENT

A
1) Cautions on adjustments 2) Test mode
• In this product the single voltage (3.3V) is used for the This mode is used to adjust the CD mechanism module.
regulator. The reference voltage is the REFO1 (1.65V) • To enter the test mode.
instead of the GND. While pressing the 4 and 6 keys at the same time, reset.
If you should mistakenly short the REFO1 with the GND • To exit from the test mode.
during adjustment, accurate voltage will not be obtained, Turn off the ACC and back up.
and the servo’s misoperation will apply excessive shock
to the pickup. To avoid such problems: Notes:
a. Do not mix up the REFO1 with the GND when a. During ejection, do not press any other keys than the
connecting the (-) probe of measuring instruments. EJECT key until the loaded disc is ejected.
Especially on an oscilloscope, avoid connecting the (-) b. If you have pressed the (→) key or (←) key during focus
probe for CH1 to the GND. search, turn off the power immediately to protect the B
b. In many cases, measuring instruments have the same actuator from damage caused by the lens stuck.
potential as that for the (-) probe. Be sure to set the c. For the TR jump modes except 100TR, the track jump
measuring instruments to the floating state. operation will continue even if the key is released.
c. If you have mistakenly connected the REFO1 to the GND, d. For the CRG move and 100TR jump modes, the tracking
turn off the regulator or the power immediately. loop will be closed at the same time when the key is
released.
• Before mounting and removing filters or leads for e. When the power is turned off and on, the jump mode
adjustment, be sure to turn off the regulator. is reset to the single TR (91), the RF amp gain is set to 0dB,
and the auto-adjustment values are reset to the default
• For stable circuit operation, keep the mechanism settings.
operating for about one minute or more after the
regulator is turned on. C

• In the test mode, any software protections will not

work. Avoid applying any mechanical or electrical
shock to the mechanism during adjustment.

• The RFI and RFO signals with a wide frequency range

are easy to oscillate. When observing the signals,
insert a resistor of 1k ohms in series.

• The load and eject operation is not guarantied with the

mechanism upside down. If the mechanism is blocked
due to mistaken eject operation, reset the product or D
turn off and on the ACC to restore it.

DEH-1650/XU/ES 43
5 6 7 8
 1 2 3 4

6.3 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT

• Note :
The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism
module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU
unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the
PU unit must be changed, the grating should be checked using the procedure below.

• Purpose :
To check that the grating is within an acceptable range when the PU unit is changed.

B • Symptoms of Mal-adjustment :
If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform
track search operations, or taking a long time for track searching.

• Method :
• Measuring Equipment • Oscilloscope, Two L.P.F.
• Measuring Points • E, F, REFO1
• Disc • ABEX TCD-782
• Mode • TEST MODE

CD CORE UNIT(S10.1)
C

L.P.F.

Xch Ych
E 100kΩ
Oscilloscope
VREF 390pF

F 100kΩ

VREF 390pF

D L.P.F.
REFO1
F
E

• Checking Procedure
1. In test mode, load the disc and switch the 3V regulator on.
2. Using the → and ← buttons, move the PU unit to the innermost track.
3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance
adjustment the display should now read "81". Press key 3. The display will change, returning to "81" on the
fourth press.
E 4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase
difference is within 75° . Refer to the photographs supplied to determine the phase angle.
5. If the phase difference is determined to be greater than 75° try changing the PU unit to see if there is any
improvement. If, after trying this a number of times, the grating angle does not become less than 75° then the
mechanism should be judged to be at fault.
• Note
Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be
seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the
average angle.
• Hint
Reloading the disc changes the clamp position and may decrease the "wobble".

44 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

Grating waveform Ech → Xch 20mV/div, AC

Fch → Ych 20mV/div, AC A

0° 30°

45° 60°

75° 90°

DEH-1650/XU/ES 45
5 6 7 8
 1 2 3 4

6.4 ERROR MODE

- Error Messages
A
If a CD is not operative or stopped during operation due to an error, the error mode is turned on and cause(s) of
the error is indicated with a corresponding number. This arrangement is intended at reducing nonsense calls from
the users and also for facilitating trouble analysis and repair work in servicing.

(1) Basic Indication Method

1) When SERRORM is selected for the CSMOD (CD mode area for the system), error codes are written to DMIN
(minutes display area) and DSEC (seconds display area). The same data is written to DMIN and DSEC. DTNO
remains in blank as before.

B 2) Head unit display examples

Depending on display capability of LCD used, display will vary as shown below. xx contains the error number.

8-digit display 6-digit display 4-digit display

ERROR–xx ERR–xx E–xx

(2) Error Code List

Code Class Displayed error code Description of the code and potential cause(s)
10 Electricity Carriage Home NG CRG can't be moved to inner diameter.
SERVO LSI Com- CRG can't be moved from inner diameter.
C munication Error → Failure on home switch or CRG move mechanism.
Communication error between microcomputer and SERVO LSI.
11 Electricity Focus Servo NG Focusing not available.
→ Stains on rear side of disc or excessive vibrations on REWRITABLE.
12 Electricity Spindle Lock NG Spindle not locked. Sub-code is strange (not readable).
Subcode NG → Failure on spindle, stains or damages on disc, or excessive vibrations.
A disc not containing CD-R data is found.
Turned over disc are found, though rarely.
CD signal error.
17 Electricity Setup NG AGC protection doesn't work. Focus can be easily lost.
D
→ Damages or stains on disc, or excessive vibrations on REWRITABLE.
30 Electricity Search Time Out Failed to reach target address.
→ CRG tracking error or damages on disc.
44 Electricity ALL Skip Skip setting for all track.
(CD-R/RW)
50 Mechanism CD On Mech Error Mechanical error during CD ON.
→ Defective loading motor, mechanical lock and mechanical sensor.
A0 System Power Supply NG Power (VD) is ground faulted.
→ Failure on SW transistor or power supply (failure on connector).
E Remarks: Mechanical errors are not displayed (because a CD is turned off in these errors).
Unreadable TOC does not constitute an error. An intended operation continues in this case.
Upper digits of an error code are subdivided as shown below:
1x: Setup relevant errors, 3x: Search relevant errors, Ax: Other errors.

46 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 DISASSEMBLY A

- Removing the Case (not shown)

1. Remove the Case.

- Removing the CD Mechanism Module (Fig.1) CD Mechanism Module

1 Remove the four screws.

B

Disconnect the connector and then remove the 1

CD Mechanism Module.
1

- Removing the Grille Assy (Fig.1)

2 Release the two latchs and then remove

the Grille Assy.
1
C
2 1 2

Grille Assy Fig.1

- Removing the Tuner Amp Unit (Fig.2)

1 Remove the screw.

2 D
2
2
2 Remove the three screws.

3 Straighten the tabs at three locations

indicated.

4 Remove the screw and then remove

4
the Tuner Amp Unit.
1

3 3 3

Tuner Amp Unit Fig.2

F

DEH-1650/XU/ES 47
5 6 7 8
 1 2 3 4

- How to assemble Keyboard Unit

1. Assemble them in order from "1" to "8". (See the figure below.)
A
2. After that, bend the crows (7 in total) until they get the right angles with the marks printed on "8".

Note) If "5" is not set collectly, defective contact may occur on "6".
To avoid this problem, hold "5" using "7" just before putting "8".

48 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

- How to hold the Mechanism Unit

1. Hold the top and bottom frame.
A
2. Do not squeeze top frame's front portion too tight,
because it is fragile.

Do not squeeze.

- Removing the Upper and Lower Frames

1. With a disc clamped, remove the four springs (A),
Upper Frame
the two springs (B), the two springs (C), and the A
four screws. A
2. To remove the upper frame, open it on the fulcrum C
C
A.
3. While lifting the carriage mechanism, remove the A
three dampers.
4. With the frames removed, insert the connectors
coming from the main unit and eject the disc.
Caution: Before installing the carriage mechanism in
the frames, be sure to apply some alcohol to the A
dampers and set the mechanism to the clamp mode.

Carriage Mechanism
B C
A
Damper
Lower Frame D
Damper

B Damper

DEH-1650/XU/ES 49
5 6 7 8
 1 2 3 4

- Removing the Pickup Unit

1. Apply shorting solder to the Pickup flexible cable.
A
Disconnect the cable.
2. Set the mechanism to the clamp mode.
3. Remove the lead wires from the inner holder.
4. Remove the washer, styling holder, change arm,
and pickup lock arm. Shorting
5. While releasing from the hook of the inner holder, Solder
lift the end of the feed screw.
Caution: In assembling, move the planet gear to the
load/eject position before setting the feed screw
in the inner holder.

C Washer
Pickup Lock Arm

Styling Holder Change Arm

Feed Screw

E
Inner Holder
Planet Gear

50 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

7.1.2 CONNECTOR FUNCTION DESCRIPTION

1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16

10A
B

ANTENNA JACK
REAR OUTPUT

Pin No. Pin No.

1 FR+ 9 -
2 RR+ 10 -
3 FR- 11 B.REMOTE
4 RR- 12 -
5 FL+ 13 -
D
6 RL+ 14 ACC
7 FL- 15 GND
8 RL- 16 B.UP

DEH-1650/XU/ES 51
5 6 7 8
 1 2 3 4

7.2 PARTS
7.2.1 IC
A
- Pin Functions(PE5330C)
Pin No. Pin Name I/O Function and Operation
1 MODEL1 Model port 1
2,3 NC Not used
4 AVSS A/D GND
5,6 NC Not used
7 AVREF1 A/D converter reference voltage
8 KYDT I Key data input
9 DPDT O Display data output
10 NC Not used
B 11 TUNPDI I PLL IC data input
12 TUNPDO O PLL IC data output
13 TUNPCK O PLL IC clock output
14 PCL O Clock adjustment output
15 TESTIN I Test program mode input
16 XSI I Serial data input
17 XSO O Serial data output
18 XSCK O Serial data clock output
19,20 NC Not used
21 swvdd O Keyboard unit power supply control output
22 ILMPW O Illumination power supply control output
23 NC Not used
C 24 XRST O CD LSI reset output
25 XA0 O CD LSI identification control signal output
26 XSTB O CD LSI strobe output
27 CLAMSW O Disc clamp switch output (CD)
28 CONT O Servo driver power supply control output
29 LOEJ O CD load motor LOAD/EJECT direction exchange output
30 CLCONT O Driver input select output
31 NC Not used
32 DALMON O Stand-by output
33 VSS1 GND
34 TELIN O Telephone mute output
35,36 NC Not used
D 37 ROMDATA O ROM data output
38,39 NC Not used
40 RECIEVE Not used
41 VDCONT O VD control output
42 NC Not used
43 SYSPW O System power supply control output
44,45 NC Not used
46 KEY2 I Key data input (Remote control)
47 NC Not used
48 MUTE O System mute output
49 ANTPW O Antenna output
50 NC Not used
E 51 VST O Strobe pulse output for electronic volume
52 VDT O Data output for electronic volume
53 VCK O Clock output for electronic volume
54 NC Not used
55 TUNPCE2 O EEPROM chip enable output 2
56 TUNPCE1 O EEPROM chip enable output 1
57-59 NC Not used
60 reset I Reset input

52 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

Pin No. Pin Name I/O Function and Operation

61 LDET I PLL lock sense input A
62 NC Not used
63 ASENS I ACC sense input
64 BSENS I Back up sense input
65 DSENS I Grille detach sense input
66 INTRQ I ATAPI HOST interrupt request input
67 VSS0 GND
68 VDD1 Power supply
69 X2 Crystal oscillator connection pin
70 X1 Crystal oscillator connection pin
71 IC(VPP) Connect to GND
72 NC Not used
73 XT1 Connect to GND B
74 VDD0 Power supply
75 AVDD Positive power supply terminal for analog circuit
76 SL I SD level input from tuner
77 TEMP Not used
78 VDSENS I VD power supply voltage sense input
79 DISCSENS I CD DISC sense input
80 STRKEY1 Key data (Remote control)

* PE5330C IC's marked by * are MOS type.

Be careful in handling them because they are very C
61
80

liable to be damaged by electrostatic induction.

1 60

20 41
D
21

40

DEH-1650/XU/ES 53
5 6 7 8
 1 2 3 4

- Pin Functions(PD6340A)
A Pin No. Pin Name I/O Function and Operation
1-5 SEG4-0 O LCD segment output
6-9 COM3-0 O LCD common output
10 VLCD LCD drive power supply
11-14 KST3-0 O Key strobe output
15,16 KDT0,1 I Key data input (analogue input)
17 REW I Remote control reception input
18 DPDT I Display data input
19 NC Not used
20 KYDT O Key data output
21 MODA GND
22 X0 Crystal oscillator connection pin
B 23 X1 Crystal oscillator connection pin
24 VSS GND
25,26 KDT2,3 I Key data input
27 NC Not used
28 KST4 O Key strobe output
29-32 NC Not used
33-55 SEG35-13 O LCD segment output
56 VDD Power supply
57-64 SEG12-5 O LCD segment output

* PD6340A
C
1

16

64 17

49 32
48

33

54 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

- Pin Functions(UPD63712AGC)
Pin No. Pin Name I/O Function and Operation
1 LD O Output of LD A
2 PD I Input of PD
3 PN I Assignment of pickup polarity
4 AVDD Power supply for the analog system
5 DGND Ground for digital circuits
6 RFOK O Output of RFOK
7 INTQ O Interruption signals to the external microcomputer
8 rst I Input of reset
9 A0 I Command/Parameter discrimination signal input
10 stb I Data strobe signal input
11 sck I Serial data clock input
12 SO O Serial data output
13 SI I Serial data input B
14 DVDD Power supply for digital circuits
15 DAVDD Power supply for DAC
16 ROUT O Output of audio for the right channel
17 DAGND GND for DAC
18 REGC Connected to the capacitor for band gap
19 DAGND GND for DAC
20 LOUT O Output of audio for the left channel
21 DAVDD Power supply for DAC
22 XVDD Power supply for the crystal oscillator
23 xtal O Connected to the crystal oscillator
24 XTAL I Connected to the crystal oscillator
25 XGND Ground for the crystal oscillator C
26 DVDD Power supply for digital circuits
27 C1D1 O Information on error correction
28 C1D2 O Information on error correction
29 C2D1 O Information on error correction
30 C2D2 O Information on error correction
31 C2D3 O Information on error correction
32 LOCK O Output of LOCK
33 MIRR O MIRR signal
34 HOLD O HOLD signal
35 PLCK O Output of PLCK
36 C16M O Output of 16.9344MHz
37 DGND Ground for digital circuits D
38 TX O DAI output
39 EMPH O Pre-emphasis information output
40 FLAG O The flag for which output sound data cannot be corrected is outputted
41 DVDD Power supply for digital circuits
42 LIMIT I Signal is inputted when the register can be read
43 xtalen I Permission to oscillate
44 DGND Ground for digital circuits
45 DIN I Input of audio data
46 DOUT O Output of audio data
47 SCKIN I Clock input for audio data
48 SCKO O Clock output for audio data
E
49 LRCKIN I Input of LRCK for audio data
50 LRCK O Output LRCK for audio data
51 DVDD Power supply for digital circuits
52 FD+ O Output of focus drive PWM
53 FD- O Output of focus drive PWM
54 TD+ O Output of tracking drive PWM
55 TD- O Output of tracking drive PWM
56 SD+ O Output of thread drive PWM
57 SD- O Output of thread drive PWM
58 MD+ O Output of spindle drive PWM
59 MD- O Output of spindle drive PWM
60 DGND Ground for digital circuits F

DEH-1650/XU/ES 55
5 6 7 8
 1 2 3 4

Pin No. Pin Name I/O Function and Operation

61 TESTEN I Connected to GND
A
62-66 TEST4-0 I Connected to GND
67 ADGND GND for DAC
68 EFM O Output of EFM signals
69 ASY I Input of asymmetry
70 ADVDD Power supply for DAC
71 RFI I Input of RF
72, 73 EQ2, 1 Equalizer 2, 1
74 RF- I Reversal input of RF
75 RF2- I Reversal input of RF2
76 AGCO O Output of RF
77 AGCI I Input of AGC
B 78 RFO O Output of RF
79 ATEST O Analog tests
80 C3T Connection to the capacitor for detecting 3T
81 AGND Ground for the analog system
82 A I Input of A
83 C I Input of C
84 B I Input of B
85 D I Input of D
86 F I Input of F
87 E I Input of E
88 VREFIN I Photo-detector input bias voltage
89 AVDD Power supply for the analog system
C 90 REFOUT O Output of reference voltage
91 REFC Connected to the capacitor for output of REFOUT
92 FE- I Reversal input of FE
93 FEO O Output of FE
94 ADCIN I TEST
95 TE- I Reversal input of TE
96 TEO O Output of TE
97 TE2 O TE2
98 TEC I TEC
99 AGND Ground for the analog system
100 PWMSW I Servo PWM mode switching

* UPD63712AGC
50

26

51 25

75 1
100
76

56 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

- Pin Functions(BA5835FP)
Pin No. Pin Name Function and Operation
1 VR Input pin for reference voltage A
2 OPIN2(+) Input pin for non-inverting input for CH2 preamplifier
3 OPIN2(-) Input pin for inverting input for CH2 preamplifier
4 OPOUT2 Output pin for CH2 preamplifier
5 OPIN1(+) Input pin for non-inverting input for CH1 preamplifier
6 OPIN1(-) Input pin for inverting input from CH1 preamplifier
7 OPOUT1 Output pin for CH1 preamplifier
8 GND Ground pin
9 MUTE Mute control pin
10 POWVCC1 Power supply pin for CH1, CH2, and CH3 at "Power" stage
11 VO1(-) Driver CH1 - Negative output
12 VO1(+) Driver CH2 - Positive output
13 VO2(-) Driver CH2 - Negative output B
14 VO2(+) Driver CH2 - Positive output
15 VO3(+) Driver CH2 - Positive output
16 VO3(-) Driver CH2 - Negative output
17 VO4(+) Driver CH4 - Positive output
18 VO4(-) Driver CH4 - Negative output
19 POWVCC2 Power supply pin for CH4 at "Power" stage
20 GND Ground pin
21 CNT Control pin
22 LDIN Loading input
23 OPOUTSL Output pin for preamplifier for thread
24 OPINLSL Input pin for preamplifier for thread
25 OPOUT3 CH3 preamplifier output pin C
26 OPIN3(-) Input pin for inverting input for CH3 preamplifier
27 OPIN3(+) Input pin for non-inverting input for CH3 preamplifier
28 PREVCC PreVcc

BA5835FP

14 1

15 28

DEH-1650/XU/ES 57
5 6 7 8
 1 2 3 4

- FM/AM Tuner Unit

7 6 13 5 10 9 8 11 14 18 19 20 21

WC
CE2

ROM_VDD

SL

DI
CK
CE1

DO
NC

NC

NC

NC

NC
A

IC 3 EEPROM IC 5
←
5.0V 5V 3.3V

OSC LPF

AM ANT FMRF
1 ATT
Rch
24
IC 2
IC 1 2.5V
FM ANT
3 3.3V
ATT Lch
B FMRF MIXER, IF AMP DET, FM MPX
23

RF adj
ANT adj

T51 CF52
CF51
AUDIOGND

IC 4
OSCGND

VDD_3.3

←
RFGND

3.3V 3.3V 2.5V 2.5V

DGND

VCC
NC

2 12 15 22 16 4 17

C No. Symbol I/O Explain

1 AMANT I AM antenna input AM antenna input high impedance AMANT pin is connected with
an all antenna by way of 4.7µH. (LAU type inductor) A series circuit
including an inductor and a resistor is connected with RF ground for
the countermeasure against the ham of power transmission line.
2 RFGND RF ground Ground of antenna block
3 FMANT I FM antenna input Input of FM antenna 75Ω Surge absorber(DSP-201M-S00B) is necessary.
4 VCC power supply The power supply for analog block. D.C 8.4V ± 0.3V
5 SL O signal level Output of FM/AM signals level
6 CE2 I chip enable-2 Chip enable for EEPROM ”Low” active
7 WC I write control You can write EEPROM, when EEPROM write control is “Low”.
Ordinary non connection
D 8 CE1 I chip enable-1 Chip enable for AF•RF ”High” active
9 CK I clock Clock
10 DI I data in Data input
11 NC non connection Not used
12 OSCGND osc ground Ground of oscillator block
13 ROM_VDD power supply Power supply for EEPROM pin 13 is connected with a power supply of
micro computer.
14 DO O data out Data output
15 DGND digital ground Ground of digital block
16 NC non connection Not used
17 VDD_3.3 power supply The power supply for digital block. 3.3V ± 0.2V
18 NC non connection Not used
E 19 NC non connection Not used
20 NC non connection Not used
21 NC non connection Not used
22 AUDIOGND audio ground Ground of audio block
23 L ch O L channel output FM stereo “L-ch” signal output or AM audio output
24 R ch O R channel output FM stereo “R-ch” signal output or AM audio output

58 DEH-1650/XU/ES
1 2 3 4
 8 7 6 5
59 DEH-1650/XU/ES
F
COMMON
SEGMENT

39
38
37
36
COM3 COM3
COM2 COM2
E COM1 COM1
COM0 COM0
35
34
33
32
31
30
29
28
D 27
26
25
24
23
22
21
20
19
18
C 17
16
15
14
13
12
11
10
9
8
B 7
6
5
4
3
2
1
0
A
- LCD(CAW1801(DEH-1650/XU/ES), YAW5004(DEH-1650/XU/CN))
7.2.2 DISPLAY
8 7 6 5
4 3 2 1
DEH-1650/XU/ES 60
F
COMMON
SEGMENT

39
38
37
36
COM3 COM3
COM2 COM2 E
COM1 COM1
COM0 COM0
35
34
33
32
31
30
29
28 D
27
26
25
24
23
22
21
20
19
18 C
17
16
15
14
13
12
11
10
9
8 B
7
6
5
4
3
2
1
0
A
- LCD(YAW5003(DEH-1650B/XU/ES))
4 3 2 1
 5 6 7 8

7.3 OPERATIONAL FLOW CHART

Power ON

VDD1=5V
Pin 68

BSENS
Pin 64

BSENS=L

ASENS
Pin 63

ASENS=L C

DSENS
Pin 65
DSENS=L

Starts communication with Grille microcomputer.

300ms

swvdd←L D
Pin 21
300ms
In case of the above signal, the communication
Source keys with Grille microcomputer may fail.
operative If the time interval is not 300msec, the oscillator
may be defective.

Source ON
E

SYSPW←H
Pin 43

Completes power-on operation.(After that, proceed to each source operation.)

DEH-1650/XU/ES 61
5 6 7 8
 1 2 3 4

7.4 CLEANING

Before shipping out the product, be sure to clean the

following portions by using the prescribed cleaning
tools:
Portions to be cleaned Cleaning tools
CD pickup lenses Cleaning liquid : GEM1004
Cleaning paper : GED-008

62 DEH-1650/XU/ES
1 2 3 4
 5 6 7 8

8. OPERATIONS
A

DEH-1650/XU/ES 63
5 6 7 8
 1 2 3 4

64 DEH-1650/XU/ES
1 2 3 4
5 6 7 8

DEH-1650/XU/ES 65
5 6 7 8
 1 2 3 4

A
About the fixing screws for the front panel
If you do not operate the Detaching and Replacing the Front Panel Function, use the sup-
plied fixing screws and fix the front panel to this unit.

CXX1066

B CXX1066

66 DEH-1650/XU/ES
1 2 3 4
 5. Connecting cords with RCA
pin plugs (sold separately)
5

5
1. This Product 7. Power amp
(sold separately)

2. Rear output
- CONNECTION DIAGRAM

4. Fuse
3. Antenna jack
6. Blue/white
To system control terminal of the power amp or
Auto-antenna relay control terminal (max. 300 mA 8. System remote control
12 V DC).

6
6

+ +
12. Rear speaker 12. Rear speaker
≠ ≠

9. Yellow

DEH-1650/XU/ES
To terminal always supplied with 13. Perform these connections when using
power regardless of ignition the optional amplifier.
switch position.

7
7

10. Red 17. White 19. Gray

To electric terminal controlled by + +
14. Front speaker 14. Front speaker
ignition switch (12 V DC)
≠ ≠
ON/OFF. 18. White/black 20. Gray/black
15. Left 16. Right
21. Green 23. Violet
12. Rear speaker + + 12. Rear speaker
≠ ≠
22. Green/black 24. Violet/black
11. Black (ground)
To vehicle (metal) body.

25. With a 2 speaker system, do not

connect anything to the speaker leads
that are not connected to speakers.
8

8
67
E
A

D
C

F
B