A318/A319/A320/A321: Service Bulletin
A318/A319/A320/A321: Service Bulletin
A318/A319/A320/A321: Service Bulletin
SERVICE BULLETIN
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
ATA SYSTEM: 34
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
SUMMARY
APPLICABILITY Operators updated and added
CONCURRENT REQUIREMENTS Applicability updated
PLANNING INFORMATION
APPLICABILITY
Configuration definition Aircraft added
CONCURRENT REQUIREMENTS Applicability updated
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01001-390A-A Test
CONF 002
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01001-390A-A Test
CONF 003
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01001-390A-A Test
CONF 005
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01002-390A-A Test
CONF 006
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01001-390A-A Test
CONF 007
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01002-390A-A Test
CONF 008
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01002-390A-A Test
CONF 010
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01002-390A-A Test
CONF 011
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01001-390A-A Test
CONF 012
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01001-390A-A Test
CONF 013
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01001-390A-A Test
CONF 015
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01001-390A-A Test
CONF 016
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01001-390A-A Test
CONF 017
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01002-390A-A Test
CONF 018
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01001-390A-A Test
CONF 020
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
SUMMARY
APPLICABILITY Operators added
CONCURRENT REQUIREMENTS Applicability updated
PLANNING INFORMATION
APPLICABILITY
Configuration definition Aircraft added
CONCURRENT REQUIREMENTS Applicability updated
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01002-390A-A Test
CONF 021
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01001-390A-A Test
CONF 022
SERVICE BULLETIN
General AMM Task 34-52-00-740-004 removed from appendix
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A Modification
TEST
A320-A-34-XX-1712- Note for AMM Task 34-52-00-740-004 deleted
01002-390A-A Test
NOTE: This revision satisfies the requirements of the subsequent Technical Adaptation(s)
(TA) issued for the related MSNs.
TA MSN
TA-80718087/003/2019 01648, 01656, 01773, 01895, 01928, 02107
TA-80717604/008/2019 02341
Revision No. 09 issued to add aircraft MSN for operator AAW, AWC, CSC, CSZ and VJC.
Revision No. 10 issued to add aircraft MSN 04535, 04609 and 04614 for operator IGO.
Revision No. 11 issued to add aircraft MSN 03911 for operator BKP and aircraft MSN 04813,
04818, 04965, 05036, 05076, 05080, 05298, 05365 and 05411 for operator IGO.
F. REVISION SEQUENCE
ORIGINAL: Dec 21/17
REVISION No. : 01 - Mar 07/18
REVISION No. : 02 - May 03/18
REVISION No. : 03 - Aug 09/18
REVISION No. : 04 - Dec 11/18
REVISION No. : 05 - Mar 04/19
REVISION No. : 06 - Jul 04/19
REVISION No. : 07 - Nov 04/19
REVISION No. : 08 - Mar 04/20
REVISION No. : 09 - Jun 08/20
REVISION No. : 10 - Oct 06/20
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 156506P14582
156507P14583 157433P18275 157970P15322 162446P20625 164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 002
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 156506P14582
156507P14583 157433P18275 157970P15322 162446P20625 164432P11632
31818P7424
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 003
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 156506P14582
156507P14583 157433P18277 157970P15322 162446P20625 164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 004
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 151451P14144 151451P14153 151451P14239 156506P14582 156507P14583
157433P18275 157970P15322 162446P20625 164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
REV 00 Dec 21/17 A320-34-1712
REV 12 Mar 11/21 Page 9
A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
CONF 005
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 151451P18349
156506P14582 156507P14583 157433P18275 157970P15322 162446P20625
164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 006
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 151451P14144 151451P14153 151451P14239 156506P14582 156507P14583
157433P18277 157970P15322 162446P20625 164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 007
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 151451P14144 151451P14153 151451P14239 151451P18349 156506P14582
156507P14583 157433P18275 157970P15322 162446P20625 164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 008
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 151451P14144 151451P14153 151451P14239 151451P18349 156506P14582
156507P14583 157433P18277 157970P15322 162446P20625 164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 009
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 151451P18349
156506P14582 156507P14583 157433P18277 157970P15322 162446P20625
164432P11632
CONF 010
MODIFICATION CLASSIFICATION
MAJOR None
MINOR 151451P14144 151451P14153 151451P14239 151451P18349 156506P14582
156507P14583 157433P18275 157969P15320 157970P15322 162446P20625
164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 011
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 156506P14582
156507P14583 157433P18277 157970P15322 162446P20625 164432P11632
31818P7424
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 012
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 156506P14582
156507P14583 157433P18275 157970P15322 162446P20625 164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 013
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 156506P14582
156507P14583 157433P18277 157970P15322 162446P20625 164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 014
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 156506P14582
156507P14583 157433P18275 157970P15322 162446P20625 164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 015
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 156506P14582
156507P14583 157433P18277 157970P15322 162446P20625 164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 016
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 156506P14582
156507P14583 157433P18277 157970P15322 162446P20625 164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 017
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 151451P18349
156506P14582 156507P14583 157433P18277 157970P15322 162446P20625
164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 018
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 156506P14582
156507P14583 157433P18275 157970P15322 162446P20625 164432P11632
CONF 019
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 156506P14582
156507P14583 157433P18275 157970P15322 162446P20625 164432P11632
31818P7424
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 020
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 151451P18349
156506P14582 156507P14583 157433P18275 157970P15322 162446P20625
164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 021
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 150306P11588 151451P14144 151451P14153 151451P14239 156506P14582
156507P14583 157433P18275 157970P15322 162446P20625 164432P11632
31818P7424
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 022
MODIFICATION CLASSIFICATION
MAJOR 155999P13843
MINOR 151451P14144 151451P14153 151451P14239 151451P18349 156506P14582
156507P14583 157433P18275 157970P15322 162446P20625 164432P11632
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
(1) History
This Service Bulletin is issued further to an operator's request.
(2) Objective/Action
This Service Bulletin installs the ACSS transponders (XPDR) XS950 P/N 7517800-12402
compliant with Automatic Dependent Surveillance-Broadcast (ADS-B) OUT DO-260B
function.
This Service Bulletin:
EVALUATION TABLE
COMPLIANCE OPTIONAL COST SAVING NO
A/C OPERATION YES VENDOR SB NO
AFFECTED
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD NO
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
D. MAINTENANCE CONFIGURATION
CONF 001
No specific aircraft maintenance configuration required.
CONF 002
No specific aircraft maintenance configuration required.
CONF 003
No specific aircraft maintenance configuration required.
CONF 004
No specific aircraft maintenance configuration required.
CONF 002
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 003
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 004
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 005
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 006
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 007
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 009
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 010
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 011
(1) Modification
CONF 012
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 013
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 014
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 015
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 016
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 017
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 019
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 020
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 021
(1) Modification
CONF 022
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF ALL
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
10N 15T 36V 49N 52L 68M 69X 78X 82W 83Q 83V 86Z AAW ABN ACA AEE AIJ ALK AUA AUH
AWC AXM AZA BEL BGF BJN BKP CFG CSC CSZ DCS DRK EVA EWE EWG EZY FHM FHY G8E
GFA GOW GSW GTR GWI HFM HYR IBE IBS IGO JCC JOC KNE LBT LDA LDM LYX LZB MKR MLM
MMA NMB NWS OHY ORF PGT PIA PIC PLM PVG QNT QTR RJA ROT RWZ SAS SBI SDR SLK SVA
SVR TAP TAR THY UAE UAL UEA UNA VJC VKG VLG VOE VVC WRC
NOTE: This Service Bulletin is written for the operators listed above. The modification in
this Service Bulletin can be done by other operators. If other operators want to do
this modification, use the RFC/RMO procedure and write to:
AIRBUS
2 ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
G. CONCURRENT REQUIREMENTS
NOTE: Service Bulletin No. A320-34-1312 (NAVIGATION - T2CAS - INSTALL ACSS TRAFFIC
AND TERRAIN COLLISION AVOIDANCE SYSTEM (T2CAS) FOR AIRCRAFT WITH EGPWS
BASIS).
ON A/C 01259
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320-34-1312 (NAVIGATION - T2CAS - INSTALL ACSS TRAFFIC
AND TERRAIN COLLISION AVOIDANCE SYSTEM (T2CAS) FOR AIRCRAFT WITH EGPWS
BASIS).
ON A/C 01487, 01566, 01648, 01656, 01773, 01895, 01928, 01957, 02097, 02107, 02121,
02138, 02161, 02288, 02341
NOTE: Service Bulletin No. A320-34-1312 (NAVIGATION - T2CAS - INSTALL ACSS TRAFFIC
AND TERRAIN COLLISION AVOIDANCE SYSTEM (T2CAS) FOR AIRCRAFT WITH EGPWS
BASIS).
NOTE: Service Bulletin No. A320-34-1383 (NAVIGATION - ATC - REPLACE HONEYWELL ATC
TRANSPONDER TRA-67A BY ACSS ATC TRANSPONDER XS-950).
ON A/C 02048
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320-34-1312 (NAVIGATION - T2CAS - INSTALL ACSS TRAFFIC
AND TERRAIN COLLISION AVOIDANCE SYSTEM (T2CAS) FOR AIRCRAFT WITH EGPWS
BASIS).
ON A/C 02227
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320-34-1312 (NAVIGATION - T2CAS - INSTALL ACSS TRAFFIC
AND TERRAIN COLLISION AVOIDANCE SYSTEM (T2CAS) FOR AIRCRAFT WITH EGPWS
BASIS).
ON A/C 00370, 00390, 00402, 00511, 00750, 00755, 00763, 00790, 00821, 00837, 00869,
00880, 00906, 00917, 00933, 00945, 00958, 00960, 00975, 00979, 00982, 01021, 01027,
01034, 01047, 01059, 01067, 01099-01101, 01106, 01119, 01120, 01125, 01127, 01165,
01181, 01187, 01206, 01231, 01307
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320-34-1206 (NAVIGATION - TCAS - INSTALL ACSS TCAS 2000
COMPUTER WITH CHANGE 7.0.).
ON A/C 01399, 01451, 01479, 01484, 01516, 01572, 01655, 01674, 01681, 01700, 01713,
01716, 01736, 01757, 01793, 01799, 01809, 01816, 01836, 01889, 01932, 01942, 01960,
01961, 01965, 01996, 02003, 02060, 02104, 02143, 02220, 02225, 02242, 02248, 02270,
02357
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
ON A/C 02114, 02264, 02311, 02313, 02345, 02348, 02365, 02381, 02391, 02404, 02468,
02472, 02488, 02510, 02517, 02534, 02563, 02566, 02597, 02618, 02619, 02631, 02639,
02641, 02654, 02655, 02696, 02820, 02828
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
ON A/C 02835, 02879, 02883, 02909, 02911, 02913, 02926, 02944, 02958, 02968, 02973,
02980, 02990, 03027, 03055, 03080, 03086, 03093, 03096, 03114, 03116, 03121, 03124,
03132, 03142, 03153, 03158, 03159, 03167, 03178, 03188, 03192, 03196, 03202, 03206,
03210, 03213, 03224, 03227, 03234, 03236, 03242, 03243, 03245, 03256, 03261, 03268,
03289, 03306, 03309, 03328, 03335, 03346, 03364, 03366, 03383, 03386, 03397, 03403,
03415, 03435, 03440, 03447, 03449, 03456, 03464, 03484, 03519, 03528, 03546, 03564,
03583, 03586, 03589, 03591, 03599, 03615, 03636, 03657, 03661, 03680, 03689, 03696,
03698, 03700, 03704, 03708, 03728, 03730, 03739, 03749, 03756, 03791, 03818, 03831,
03833, 03848, 03852, 03855, 03886, 03887, 03893, 03895, 03896, 03898, 03900, 03907,
03911, 03915, 03931, 03935, 03945, 03949, 03962, 03971, 03995, 03996, 04004, 04010,
04013, 04018, 04028, 04030, 04033, 04049, 04059, 04068, 04083, 04101, 04146, 04158,
04159, 04161, 04176, 04188, 04190, 04193, 04195, 04203, 04207, 04208, 04214, 04218,
04226, 04249, 04255, 04269, 04288, 04291, 04300, 04326, 04329, 04334, 04359, 04378,
04391, 04407, 04409, 04419, 04420, 04424, 04432, 04435, 04442, 04454, 04463, 04474,
ON A/C 02869, 03115, 03343, 03563, 03598, 03609, 03643, 03666, 03695, 03732, 03815,
03846, 03885, 03906, 03921, 03956, 03976, 03978, 04075, 04108, 04119, 04143, 04152
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320-34-1466 (NAVIGATION - ATC - INSTALL "ACSS" ATC XS 950
P/N 7517800-10100 COMPLIANT WITH DO-260A).
ON A/C 05470, 05646, 05765, 05868, 05896, 05910, 05937, 05953, 05964, 05977, 06008,
06030
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320–34–1579 (TCAS - INSTALL TCAS 7.1 ACSS).
NOTE: Service Bulletin No. A320-34-1312 (NAVIGATION - T2CAS - INSTALL ACSS TRAFFIC
AND TERRAIN COLLISION AVOIDANCE SYSTEM (T2CAS) FOR AIRCRAFT WITH EGPWS
BASIS).
ON A/C 03295, 03457, 03482, 03502, 03515, 03532, 03614, 03618, 04328, 04384, 04481,
04488, 04506, 04518, 04535, 04552, 04609, 04614, 04813, 04818, 04868, 04947, 04965,
05036, 05050, 05076, 05080, 05089, 05231, 05259, 05262, 05291, 05296, 05298, 05313,
05365, 05411, 05531
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320-34-1206 (NAVIGATION - TCAS - INSTALL ACSS TCAS 2000
COMPUTER WITH CHANGE 7.0.).
ON A/C 01008
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320-34-1383 (NAVIGATION - ATC - REPLACE HONEYWELL ATC
TRANSPONDER TRA-67A BY ACSS ATC TRANSPONDER XS-950).
NOTE: Service Bulletin No. A320-34-1562 (NAVIGATION - TCAS - CHANGE TCAS SUPPLIER
FROM HONEYWELL TO ACSS).
ON A/C 05794
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
CONF ALL
H. NATURE OF THE WORK
CONF 001
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 002
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 003
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 004
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 005
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
AIRCRAFT YES
EQUIPMENT YES
CONF 007
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 008
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 009
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 010
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 011
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 012
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 013
(1) Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 014
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 015
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 016
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 017
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 018
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 019
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF 020
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
AIRCRAFT YES
EQUIPMENT YES
CONF 022
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
AIRCRAFT YES
EQUIPMENT YES
CONF ALL
I. MANPOWER
CONF 001
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 002
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 003
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 004
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
MANPOWER
TOTAL MAN-HOURS 10.25 h
ELAPSED TIME (HOURS) 10.25 h
CONF 006
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 007
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.25 h
ELAPSED TIME (HOURS) 10.25 h
CONF 008
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.25 h
ELAPSED TIME (HOURS) 10.25 h
CONF 009
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.25 h
ELAPSED TIME (HOURS) 10.25 h
CONF 010
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.25 h
ELAPSED TIME (HOURS) 10.25 h
CONF 011
MANPOWER
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 012
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 013
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 014
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 015
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 016
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 017
(1) Modification
MANPOWER
TOTAL MAN-HOURS 10.25 h
ELAPSED TIME (HOURS) 10.25 h
CONF 018
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 019
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 020
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.25 h
ELAPSED TIME (HOURS) 10.25 h
CONF 021
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 022
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
MANPOWER
TOTAL MAN-HOURS 10.25 h
ELAPSED TIME (HOURS) 10.25 h
Z120
FR24
FR1
ICN-A320-A-34XX1712-A-FAPE3-00T1Q-A-001-01
ATA SYSTEM: 34
03815, 03846, 03885, 03906, 03921, 03956, 03976, 03978, 04075, 04108, 04119, 04143,
04152, 04195, 04249, 04520, 04523, 04536
320-216
ON A/C 01566, 01648, 01773, 01895, 01957, 01996, 02097, 02121, 02138, 02156, 02161,
02164, 02275, 02288, 02334, 02345, 02403, 02517, 02566, 02594, 02663, 02828, 02883,
02911, 02958, 02990, 03086, 03158, 03159, 03167, 03192, 03196, 03210, 03227, 03335,
03386, 03449, 03457, 03484, 03519, 03591, 03618, 03935, 04068, 04176, 04214, 04288,
04300, 04326, 04328, 04359, 04378, 04384, 04407, 04409, 04424, 04435, 04474, 04481,
04488, 04506, 04514, 04518, 04525, 04531, 04535, 04552, 04575, 04609, 04614, 04619,
04620, 04633, 04642, 04666, 04707, 04726, 04813, 04818, 04868, 04905, 04911, 04947,
04965, 05036, 05041, 05076, 05080, 05121, 05141, 05231, 05259, 05262, 05291, 05298,
05313, 05365, 05411, 05646, 05896, 05937, 05964, 05977, 06008, 06030, 06402, 06421,
06486, 06635
320-232
ON A/C 04701, 05050, 05089, 05296, 05531, 05794
320-233
ON A/C 00827, 00891, 01307, 01399, 01451, 01607, 01713, 01932, 01960, 02060, 02270,
03708, 03749, 04334, 04728
321-211
ON A/C 01021, 01027, 01836, 02220
321-212
ON A/C 01572, 01681, 01716, 02357, 02381, 02472, 02488, 02563
321-213
ON A/C 01008, 01487, 01928, 02107, 03274, 03382, 03397, 03546, 03575, 03583, 03636,
03730, 03893, 03996, 04420, 04731, 04824, 04830, 04856, 04923, 05025, 05074, 05160,
05180, 05197, 05233, 05257, 05303, 05321, 05336, 05470, 05543, 05647, 05670, 06148,
06303, 06316, 06475, 06581, 06703
321-231
CONF ALL
(2) Applicability by MSN
00370 00390 00402 00511 00750 00755 00763 00790 00821 00827 00837 00869
00880 00891 00906 00917 00933 00945 00958 00960 00975 00979 00982 01008
01021 01027 01034 01047 01059 01067 01099-01101 01106 01119 01120 01125
01127 01132 01162 01165 01179 01181 01187 01206 01231 01244 01259 01307
01308 01322 01362 01399 01451 01479 01484 01487 01516 01566 01572 01607
01648 01655 01656 01674 01681 01700 01713 01716 01736 01757 01773 01793
01799 01809 01816 01819 01836 01870 01889 01895 01928 01932 01942 01957
01960 01961 01965 01996 02003 02028 02048 02060 02097 02104 02107 02114
02121 02138 02143 02156 02161 02164 02220 02225 02227 02242 02248 02264
02270 02275 02288 02306 02311 02313 02334 02341 02345 02346 02348 02357
02365 02369 02373 02381 02391 02403 02404 02464 02468 02472 02474 02488
02510 02517 02534 02539 02563 02566 02594 02597 02618 02619 02631 02639
02641 02654 02655 02663 02696 02820 02828 02835 02869 02879 02883 02909
02911 02913 02926 02931 02944 02955 02958 02968 02973 02980 02990 03021
03027 03055 03080 03086 03093 03096 03114-03116 03121 03124 03131 03132
03142 03149 03153 03158-03160 03167 03178 03188 03192 03196 03202 03206
03210 03213 03220 03224 03225 03227 03234 03236 03238 03242 03243 03245
03256 03261 03268 03274 03286 03289 03295 03306 03309 03312 03328 03335
03343 03346 03364 03366 03382 03383 03386 03397 03403 03415 03435 03440
03447 03449 03456 03457 03464 03482 03484 03502 03508 03514 03515 03519
03528 03532 03546 03563 03564 03575 03583 03586 03589 03591 03598 03599
03609 03614 03615 03618 03636 03643 03657 03661 03666 03667 03680 03689
03690 03695 03696 03698 03700 03704 03708 03728 03730 03732 03739 03749
03756 03791 03798 03815 03818 03827 03831 03833 03846 03848 03852 03855
03885-03887 03893 03895 03896 03898 03900 03906 03907 03911 03915 03921
03931 03935 03945 03949 03956 03962 03971 03976 03978 03995 03996 04004
04010 04013 04018 04028 04030 04033 04049 04059 04068 04075 04083 04101
04108 04119 04128 04143 04146 04152 04158 04159 04161 04176 04188 04190
04193 04195 04203 04207 04208 04214 04218 04226 04235 04249 04255 04269
04288 04291 04300 04304 04326 04328 04329 04334 04359 04378 04384 04391
04407 04409 04411 04419 04420 04424 04432 04435 04442 04454 04463 04474
04478 04481 04488 04489 04501-04503 04506 04514 04517 04518 04520 04523
04525 04531 04535 04536 04552 04564 04565 04575 04589 04606 04609 04614
04619 04620 04622 04631 04633 04642 04658 04660 04666 04674 04675 04701
04707 04726 04728 04730-04733 04743 04759 04764 04813 04818 04822-04824
04830 04842 04856 04859 04868 04875 04905 04910 04911 04923 04924 04933
04947 04956 04965 04988 04992 05016 05018 05025 05036 05041 05050 05074
05076 05080 05089 05096 05112 05121 05141 05160 05163 05180 05197 05208
05221 05231-05233 05257 05259 05262 05286 05291 05296 05298 05303 05313
05321 05336 05365 05389 05411 05448 05470 05531 05543 05609 05646 05647
05650 05670 05765 05794 05868 05896 05910 05937 05953 05964 05977 06008
06030 06148 06303 06316 06402 06421 06475 06486 06581 06635 06703
(3) MSN by configuration
CONF 001
MSN CONFIGURATION
01021 01027 01047 01059 01067 01099 01101 01119 01125 001
01132 01162 01179 01181 01187 01206 01231 01244 01307
01308 01322 01399 01451 01484 01487 01516 01566 01572
01607 01648 01655 01674 01681 01700 01713 01716 01736
01757 01773 01793 01799 01809 01816 01836 01889 01895
01928 01932 01942 01957 01960 01961 01965 01996 02003
02060 02097 02104 02107 02114 02121 02138 02143 02156
02161 02164 02220 02225 02227 02242 02248 02270 02288
02345 02357 02381 02391 02472 02488 02517 02539 02563
02566 02594 02619 02654 02663 02696 02820 02828 02835
02883 02909 02911 02926 02944 02958 02968 02973 02980
02990 03021 03027 03055 03080 03093 03121 03131 03132
03149 03153 03158 03160 03167 03178 03196 03206 03210
03213 03224 03234 03236 03242 03261 03268 03274 03286
03289 03306 03312 03328 03335 03366 03382 03383 03386
03397 03435 03440 03449 03456 03464 03484 03508 03514
03519 03528 03583 03591 03599 03636 03667 03690 03696
03698 03708 03730 03739 03749 03756 03791 03798 03827
03831 03833 03848 03852 03855 03887 03893 03896 03898
03900 03907 03915 03931 03935 03945 03949 03971 03995
03996 04010 04013 04028 04030 04033 04049 04059 04068
04083 04101 04128 04146 04158 04159 04161 04176 04188
04190 04193 04203 04207 04208 04214 04218 04226 04235
04255 04269 04288 04291 04300 04304 04326 04329 04334
04359 04378 04407 04409 04411 04420 04424 04435 04463
CONF 002
MSN CONFIGURATION
01259 002
CONF 003
MSN CONFIGURATION
01034 01165 01362 01479 01656 02264 02311 02313 02341 003
02348 02365 02404 02468 02510 02534 02597 02631 02639
02655 02879 02913 02931 02955 03096 03114 03116 03124
03142 03188 03202 03220 03225 03238 03243 03245 03309
03346 03364 03403 03415 03447 03564 03586 03589 03615
03657 03661 03680 03689 03700 03704 03728 03818 03886
03895 03911 03962 04004 04018
CONF 004
MSN CONFIGURATION
02048 02869 03115 03343 03563 03598 03609 03643 03666 004
03695 03732 03815 03846 03885 03906 03921 03956 03976
03978 04075 04108 04119 04143 04152 04195 04249 04391
04419 04432 04442 04454
CONF 005
MSN CONFIGURATION
02403 03086 03159 03192 03227 03256 03546 03575 04474 005
04478 04489 04502 04514 04525 04531 04565 04575 04606
04619 04620 04631 04633 04642 04666 04674 04701 04726
04728 04730 04733 04743 04905 04924 04933 04988 05016
05112 05163 05221 05232 05448
CONF 006
MSN CONFIGURATION
04622 006
CONF 007
MSN CONFIGURATION
04501 04517 04520 04523 04536 04564 04589 04658 04675 007
04707 04731 04823 04824 04830 04856 04911 04923 05025
05041 05074 05096 05121 05141 05160 05180 05197 05233
05257 05303 05321 05336 05470 05543 05646 05647 05670
05896 05937 05964 05977 06008 06030 06148 06303 06316
CONF 008
MSN CONFIGURATION
04503 04732 04759 04764 04822 04842 04859 04875 04910 008
04956 04992 05018 05208 05286 05389 05609 05650 05765
05868 05910 05953
CONF 009
MSN CONFIGURATION
04660 009
CONF 010
MSN CONFIGURATION
06402 06421 06475 06486 06581 06635 06703 010
CONF 011
MSN CONFIGURATION
01819 01870 02028 02369 02373 02464 02474 02618 02641 011
CONF 012
MSN CONFIGURATION
00945 00958 00960 00975 00982 01008 012
CONF 013
MSN CONFIGURATION
00906 00917 00933 00979 01100 01106 01120 01127 013
CONF 014
MSN CONFIGURATION
00370 00390 00402 00511 014
CONF 015
MSN CONFIGURATION
00750 00755 00763 00790 00821 00837 00869 00880 015
CONF 016
MSN CONFIGURATION
02306 02346 016
CONF 017
MSN CONFIGURATION
03614 017
CONF 018
MSN CONFIGURATION
02275 02334 03295 03482 03502 03515 03532 018
CONF 019
MSN CONFIGURATION
00891 019
CONF 020
MSN CONFIGURATION
03457 03618 04328 04384 04481 04488 04506 04518 04535 020
04552 04609 04614 04813 04818 04868 04947 04965 05036
05050 05076 05080 05089 05231 05259 05262 05291 05296
05298 05313 05365 05531 05794
CONF 021
MSN CONFIGURATION
00827 021
CONF 022
MSN CONFIGURATION
05411 022
CONF ALL
(4) Configuration definition
CONF 001
Configuration 001
CONF 001 regards the specific PRE-SB status of the related aircraft.
CONF 001 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 155999P13843, 156506P14582,
156507P14583, 157433P18275, 157970P15322, 162446P20625,
164432P11632.
CONF 002
Configuration 002
CONF 002 regards the specific PRE-SB status of the related aircraft.
CONF 002 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 155999P13843, 156506P14582,
156507P14583, 157433P18275, 157970P15322, 162446P20625,
164432P11632, 31818P7424.
CONF 003
Configuration 003
CONF 003 regards the specific PRE-SB status of the related aircraft.
CONF 003 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 155999P13843, 156506P14582,
156507P14583, 157433P18277, 157970P15322, 162446P20625,
164432P11632.
CONF 004
Configuration 004
CONF 004 regards the specific PRE-SB status of the related aircraft.
CONF 005
Configuration 005
CONF 005 regards the specific PRE-SB status of the related aircraft.
CONF 005 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 151451P18349, 155999P13843,
156506P14582, 156507P14583, 157433P18275, 157970P15322,
162446P20625, 164432P11632.
CONF 006
Configuration 006
CONF 006 regards the specific PRE-SB status of the related aircraft.
CONF 006 retrofits following modifications: 151451P14144, 151451P14153,
151451P14239, 155999P13843, 156506P14582, 156507P14583,
157433P18277, 157970P15322, 162446P20625, 164432P11632.
CONF 007
Configuration 007
CONF 007 regards the specific PRE-SB status of the related aircraft.
CONF 007 retrofits following modifications: 151451P14144, 151451P14153,
151451P14239, 151451P18349, 155999P13843, 156506P14582,
156507P14583, 157433P18275, 157970P15322, 162446P20625,
164432P11632.
CONF 008
Configuration 008
CONF 008 regards the specific PRE-SB status of the related aircraft.
CONF 009
Configuration 009
CONF 009 regards the specific PRE-SB status of the related aircraft.
CONF 009 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 151451P18349, 155999P13843,
156506P14582, 156507P14583, 157433P18277, 157970P15322,
162446P20625, 164432P11632.
CONF 010
Configuration 010
CONF 010 regards the specific PRE-SB status of the related aircraft.
CONF 010 retrofits following modifications: 151451P14144, 151451P14153,
151451P14239, 151451P18349, 156506P14582, 156507P14583,
157433P18275, 157969P15320, 157970P15322, 162446P20625,
164432P11632.
CONF 011
Configuration 011
CONF 011 regards the specific PRE-SB status of the related aircraft.
CONF 011 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 155999P13843, 156506P14582,
156507P14583, 157433P18277, 157970P15322, 162446P20625,
164432P11632, 31818P7424.
CONF 012
Configuration 012
CONF 012 regards the specific PRE-SB status of the related aircraft.
CONF 012 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 155999P13843, 156506P14582,
156507P14583, 157433P18275, 157970P15322, 162446P20625,
164432P11632.
CONF 013
Configuration 013
CONF 013 regards the specific PRE-SB status of the related aircraft.
CONF 013 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 155999P13843, 156506P14582,
156507P14583, 157433P18277, 157970P15322, 162446P20625,
164432P11632.
CONF 014
Configuration 014
CONF 014 regards the specific PRE-SB status of the related aircraft.
CONF 014 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 155999P13843, 156506P14582,
156507P14583, 157433P18275, 157970P15322, 162446P20625,
164432P11632.
CONF 015
Configuration 015
CONF 015 regards the specific PRE-SB status of the related aircraft.
CONF 015 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 155999P13843, 156506P14582,
156507P14583, 157433P18277, 157970P15322, 162446P20625,
164432P11632.
CONF 016
Configuration 016
CONF 016 regards the specific PRE-SB status of the related aircraft.
CONF 016 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 155999P13843, 156506P14582,
156507P14583, 157433P18277, 157970P15322, 162446P20625,
164432P11632.
CONF 017
Configuration 017
CONF 017 regards the specific PRE-SB status of the related aircraft.
CONF 017 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 151451P18349, 155999P13843,
156506P14582, 156507P14583, 157433P18277, 157970P15322,
162446P20625, 164432P11632.
CONF 018
Configuration 018
CONF 018 regards the specific PRE-SB status of the related aircraft.
CONF 018 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 155999P13843, 156506P14582,
156507P14583, 157433P18275, 157970P15322, 162446P20625,
164432P11632.
CONF 019
Configuration 019
CONF 019 regards the specific PRE-SB status of the related aircraft.
CONF 019 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 155999P13843, 156506P14582,
156507P14583, 157433P18275, 157970P15322, 162446P20625,
164432P11632, 31818P7424.
CONF 020
Configuration 020
CONF 020 regards the specific PRE-SB status of the related aircraft.
CONF 020 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 151451P18349, 155999P13843,
156506P14582, 156507P14583, 157433P18275, 157970P15322,
162446P20625, 164432P11632.
CONF 021
Configuration 021
CONF 021 regards the specific PRE-SB status of the related aircraft.
CONF 021 retrofits following modifications: 150306P11588, 151451P14144,
151451P14153, 151451P14239, 155999P13843, 156506P14582,
156507P14583, 157433P18275, 157970P15322, 162446P20625,
164432P11632, 31818P7424.
CONF 022
Configuration 022
CONF 022 regards the specific PRE-SB status of the related aircraft.
CONF 022 retrofits following modifications: 151451P14144, 151451P14153,
151451P14239, 151451P18349, 155999P13843, 156506P14582,
156507P14583, 157433P18275, 157970P15322, 162446P20625,
164432P11632.
CONF ALL
B. CONCURRENT REQUIREMENTS
NOTE: Service Bulletin No. A320-34-1312 (NAVIGATION - T2CAS - INSTALL ACSS TRAFFIC
AND TERRAIN COLLISION AVOIDANCE SYSTEM (T2CAS) FOR AIRCRAFT WITH EGPWS
BASIS).
ON A/C 01259
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320-34-1312 (NAVIGATION - T2CAS - INSTALL ACSS TRAFFIC
AND TERRAIN COLLISION AVOIDANCE SYSTEM (T2CAS) FOR AIRCRAFT WITH EGPWS
BASIS).
ON A/C 01487, 01566, 01648, 01656, 01773, 01895, 01928, 01957, 02097, 02107, 02121,
02138, 02161, 02288, 02341
NOTE: Service Bulletin No. A320-34-1312 (NAVIGATION - T2CAS - INSTALL ACSS TRAFFIC
AND TERRAIN COLLISION AVOIDANCE SYSTEM (T2CAS) FOR AIRCRAFT WITH EGPWS
BASIS).
NOTE: Service Bulletin No. A320-34-1383 (NAVIGATION - ATC - REPLACE HONEYWELL ATC
TRANSPONDER TRA-67A BY ACSS ATC TRANSPONDER XS-950).
ON A/C 02048
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320-34-1312 (NAVIGATION - T2CAS - INSTALL ACSS TRAFFIC
AND TERRAIN COLLISION AVOIDANCE SYSTEM (T2CAS) FOR AIRCRAFT WITH EGPWS
BASIS).
NOTE: Service Bulletin No. A320-34-1466 (NAVIGATION - ATC - INSTALL "ACSS" ATC XS 950
P/N 7517800-10100 COMPLIANT WITH DO-260A).
ON A/C 02227
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320-34-1312 (NAVIGATION - T2CAS - INSTALL ACSS TRAFFIC
AND TERRAIN COLLISION AVOIDANCE SYSTEM (T2CAS) FOR AIRCRAFT WITH EGPWS
BASIS).
ON A/C 03021, 03131, 03149, 03160, 03238, 03274, 03286, 03312, 03508, 03514, 03667,
03690, 03798, 03827, 04128, 04235, 04304, 04411, 04728, 04730, 04733, 04924, 04933,
05163, 05221
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
ON A/C 00370, 00390, 00402, 00511, 00750, 00755, 00763, 00790, 00821, 00837, 00869,
00880, 00906, 00917, 00933, 00945, 00958, 00960, 00975, 00979, 00982, 01021, 01027,
01034, 01047, 01059, 01067, 01099-01101, 01106, 01119, 01120, 01125, 01127, 01165,
01181, 01187, 01206, 01231, 01307
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320-34-1206 (NAVIGATION - TCAS - INSTALL ACSS TCAS 2000
COMPUTER WITH CHANGE 7.0.).
ON A/C 01399, 01451, 01479, 01484, 01516, 01572, 01655, 01674, 01681, 01700, 01713,
01716, 01736, 01757, 01793, 01799, 01809, 01816, 01836, 01889, 01932, 01942, 01960,
01961, 01965, 01996, 02003, 02060, 02104, 02143, 02220, 02225, 02242, 02248, 02270,
02357
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
ON A/C 02114, 02264, 02311, 02313, 02345, 02348, 02365, 02381, 02391, 02404, 02468,
02472, 02488, 02510, 02517, 02534, 02563, 02566, 02597, 02618, 02619, 02631, 02639,
02641, 02654, 02655, 02696, 02820, 02828
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
ON A/C 02835, 02879, 02883, 02909, 02911, 02913, 02926, 02944, 02958, 02968, 02973,
02980, 02990, 03027, 03055, 03080, 03086, 03093, 03096, 03114, 03116, 03121, 03124,
03132, 03142, 03153, 03158, 03159, 03167, 03178, 03188, 03192, 03196, 03202, 03206,
03210, 03213, 03224, 03227, 03234, 03236, 03242, 03243, 03245, 03256, 03261, 03268,
03289, 03306, 03309, 03328, 03335, 03346, 03364, 03366, 03383, 03386, 03397, 03403,
03415, 03435, 03440, 03447, 03449, 03456, 03464, 03484, 03519, 03528, 03546, 03564,
03583, 03586, 03589, 03591, 03599, 03615, 03636, 03657, 03661, 03680, 03689, 03696,
03698, 03700, 03704, 03708, 03728, 03730, 03739, 03749, 03756, 03791, 03818, 03831,
03833, 03848, 03852, 03855, 03886, 03887, 03893, 03895, 03896, 03898, 03900, 03907,
03911, 03915, 03931, 03935, 03945, 03949, 03962, 03971, 03995, 03996, 04004, 04010,
04013, 04018, 04028, 04030, 04033, 04049, 04059, 04068, 04083, 04101, 04146, 04158,
04159, 04161, 04176, 04188, 04190, 04193, 04195, 04203, 04207, 04208, 04214, 04218,
04226, 04249, 04255, 04269, 04288, 04291, 04300, 04326, 04329, 04334, 04359, 04378,
04391, 04407, 04409, 04419, 04420, 04424, 04432, 04435, 04442, 04454, 04463, 04474,
04478, 04489, 04501-04503, 04514, 04517, 04520, 04523, 04525, 04531, 04536, 04564,
04565, 04575, 04589, 04606, 04619, 04620, 04631, 04633, 04642, 04658, 04660, 04666,
04674, 04675, 04701, 04707, 04726, 04731, 04732, 04743, 04759, 04764, 04822-04824,
04830, 04842, 04856, 04859, 04875, 04905, 04910, 04911, 04923, 04956, 04988, 04992,
05016, 05018, 05025, 05041, 05074, 05096, 05112, 05121, 05141, 05160, 05180, 05197,
05208, 05232, 05233, 05257, 05286, 05303, 05321, 05336, 05389, 05448, 05543, 05609,
05647, 05650, 05670
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
ON A/C 02869, 03115, 03343, 03563, 03598, 03609, 03643, 03666, 03695, 03732, 03815,
03846, 03885, 03906, 03921, 03956, 03976, 03978, 04075, 04108, 04119, 04143, 04152
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320-34-1466 (NAVIGATION - ATC - INSTALL "ACSS" ATC XS 950
P/N 7517800-10100 COMPLIANT WITH DO-260A).
ON A/C 05470, 05646, 05765, 05868, 05896, 05910, 05937, 05953, 05964, 05977, 06008,
06030
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320–34–1579 (TCAS - INSTALL TCAS 7.1 ACSS).
NOTE: Service Bulletin No. A320-34-1312 (NAVIGATION - T2CAS - INSTALL ACSS TRAFFIC
AND TERRAIN COLLISION AVOIDANCE SYSTEM (T2CAS) FOR AIRCRAFT WITH EGPWS
BASIS).
ON A/C 03295, 03457, 03482, 03502, 03515, 03532, 03614, 03618, 04328, 04384, 04481,
04488, 04506, 04518, 04535, 04552, 04609, 04614, 04813, 04818, 04868, 04947, 04965,
05036, 05050, 05076, 05080, 05089, 05231, 05259, 05262, 05291, 05296, 05298, 05313,
05365, 05411, 05531
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320-34-1206 (NAVIGATION - TCAS - INSTALL ACSS TCAS 2000
COMPUTER WITH CHANGE 7.0.).
ON A/C 01008
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
NOTE: Service Bulletin No. A320-34-1383 (NAVIGATION - ATC - REPLACE HONEYWELL ATC
TRANSPONDER TRA-67A BY ACSS ATC TRANSPONDER XS-950).
NOTE: Service Bulletin No. A320-34-1562 (NAVIGATION - TCAS - CHANGE TCAS SUPPLIER
FROM HONEYWELL TO ACSS).
ON A/C 05794
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this/these Service Bulletin(s):
CONF ALL
C. REASON
(1) History
This Service Bulletin is issued further to an operator's request.
(2) Objective/Action
This Service Bulletin installs the ACSS transponders (XPDR) XS950 P/N 7517800-12402
compliant with Automatic Dependent Surveillance-Broadcast (ADS-B) OUT DO-260B
function.
This Service Bulletin:
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 004
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 005
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 006
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 007 010
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 008
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 009
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 011
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 012
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 013
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 014
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 015
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 016
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 017
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 018
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 019
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 020
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 021
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF 022
1 Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
CONF ALL
E. COMPLIANCE
(1) Classification
OPTIONAL: Service Bulletin for convenience or option.
(2) Accomplishment Timescale
In accordance with operators' maintenance schedule.
F. APPROVAL
The technical content of this document is approved under the authority of the Design
Organisation Approval ref. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
CONF 001
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 002
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 003
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 004
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 005
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
Parity Configuration Recording 0.25 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.25 h
ELAPSED TIME (HOURS) 10.25 h
CONF 006
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION
Job Set-up 1.00 h
Parity Configuration Recording 0.25 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.25 h
ELAPSED TIME (HOURS) 10.25 h
CONF 008
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
Parity Configuration Recording 0.25 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.25 h
ELAPSED TIME (HOURS) 10.25 h
CONF 009
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
Parity Configuration Recording 0.25 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.25 h
ELAPSED TIME (HOURS) 10.25 h
CONF 010
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 012
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
PREPARATION
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 014
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
PREPARATION
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 016
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
PREPARATION
PREPARATION
Job Set-up 1.00 h
Parity Configuration Recording 0.25 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.25 h
ELAPSED TIME (HOURS) 10.25 h
CONF 018
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 019
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 020
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
PREPARATION
Job Set-up 1.00 h
Parity Configuration Recording 0.25 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.25 h
ELAPSED TIME (HOURS) 10.25 h
CONF 021
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.00 h
ELAPSED TIME (HOURS) 10.00 h
CONF 022
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification
(a) Task set A320-A-34-XX-1712-01000-93AA-A Modification
PREPARATION
Job Set-up 1.00 h
Parity Configuration Recording 0.25 h
PROCEDURE
Modify the Equipment and the Wiring in the Aft Electronics 7.00 h
Rack 80VU
PREPARATION FOR TEST
None
TEST
Test 1.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 10.25 h
ELAPSED TIME (HOURS) 10.25 h
CONF ALL
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
CONF 001 003-010 012-015
Not changed
CONF 002 011 016-022
(1) Alternating Current (AC) Load Changes
NOTE: The values listed in the table(s) show the increase (+) or decrease (-) of the
electrical load resulting from the accomplishment of this Service Bulletin.
ON A/C 01399, 01451, 01479, 01484, 01516, 01572, 01655, 01674, 01681, 01700, 01713,
01716, 01736, 01757, 01793, 01799, 01809, 01816, 01836, 01889, 01932, 01942, 01960,
01961, 01965, 01996, 02003, 02060, 02104, 02143, 02220, 02225, 02242, 02248, 02270,
02357
ON A/C 05470, 05646, 05765, 05868, 05896, 05910, 05937, 05953, 05964, 05977, 06008,
06030
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
CONF 001
Material for task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 005
Material for task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF 014
Material for task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF ALL
B. TOOLING
No tools
C. CONSUMABLES
No consumables
D. LIST OF NEW PARTS
Part kit 341712A01R00
Availability
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Procurement address
NOTE(S)
The AIRBUS material is included in the commercial offer and as such will be supplied
by AIRBUS Upgrade Services. To facilitate the material reception, Airline Customers
are requested to contact:
Availability
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Procurement address
NOTE(S)
The AIRBUS material is included in the commercial offer and as such will be supplied
by AIRBUS Upgrade Services. To facilitate the material reception, Airline Customers
are requested to contact:
Availability
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Procurement address
NOTE(S)
The AIRBUS material is included in the commercial offer and as such will be supplied
by AIRBUS Upgrade Services. To facilitate the material reception, Airline Customers
are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
CONF 007
Equipment for task set A320-A-34-XX-1712-01000-93AA-A Modification
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
CONF 014
Equipment for task set A320-A-34-XX-1712-01000-93AA-A Modification
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
CONF 021
Equipment for task set A320-A-34-XX-1712-01000-93AA-A Modification
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
Procurement address
NOTE(S)
Sales terms must be agreed between the Customer and AIRBUS in accordance with
the RFC (or RFC/RMO) procedure.
Equipment procurement conditions are defined in the commercial offer. For any
assistance, Airline Customers are requested to contact:
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10005 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 002
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10002 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 003
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10005 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 004
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10100 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 005
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10005 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 006
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10100 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 007
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10100 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 008
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10100 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 009
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10005 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 010
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10100 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 011
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10002 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 012
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10005 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 013
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10005 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 014
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10005 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 015
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10005 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 016
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10010 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 017
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10010 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 018
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10010 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 019
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10002 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 020
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10010 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 021
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10002 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 022
Interchangeable parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TRANSPONDER-ATC 7517800-10101 7517800-12402 03 (1)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
CONF 001
Spare parts for task set A320-A-34-XX-1712-01000-93AA-A Modification
CONF ALL
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-34-XX-1712-01000-93AA-A (A320-A-34-XX-1712-01ZZZ-93AZ-A)
Modification
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, contact AIRBUS for further instructions and
approval.
CONF 006
TOTAL MAN-HOURS 10.00 h
CONF 007
TOTAL MAN-HOURS 10.25 h
CONF 008
TOTAL MAN-HOURS 10.25 h
CONF 009
TOTAL MAN-HOURS 10.25 h
CONF 010
TOTAL MAN-HOURS 10.25 h
CONF 011
TOTAL MAN-HOURS 10.00 h
CONF 012
TOTAL MAN-HOURS 10.00 h
CONF 013
TOTAL MAN-HOURS 10.00 h
CONF 014
TOTAL MAN-HOURS 10.00 h
CONF 015
TOTAL MAN-HOURS 10.00 h
CONF 016
TOTAL MAN-HOURS 10.00 h
CONF 017
TOTAL MAN-HOURS 10.25 h
CONF 018
TOTAL MAN-HOURS 10.00 h
CONF 019
TOTAL MAN-HOURS 10.00 h
CONF 020
TOTAL MAN-HOURS 10.25 h
CONF 021
TOTAL MAN-HOURS 10.00 h
CONF 022
TOTAL MAN-HOURS 10.25 h
CONF 001
ELAPSED TIME (HOURS) 10.00 h
CONF 002
ELAPSED TIME (HOURS) 10.00 h
CONF 003
ELAPSED TIME (HOURS) 10.00 h
CONF 004
ELAPSED TIME (HOURS) 10.00 h
CONF 005
ELAPSED TIME (HOURS) 10.25 h
CONF 006
ELAPSED TIME (HOURS) 10.00 h
CONF 007
ELAPSED TIME (HOURS) 10.25 h
CONF 008
ELAPSED TIME (HOURS) 10.25 h
CONF 009
ELAPSED TIME (HOURS) 10.25 h
CONF 010
ELAPSED TIME (HOURS) 10.25 h
CONF 011
ELAPSED TIME (HOURS) 10.00 h
CONF 012
ELAPSED TIME (HOURS) 10.00 h
CONF 013
ELAPSED TIME (HOURS) 10.00 h
CONF 014
ELAPSED TIME (HOURS) 10.00 h
CONF 015
ELAPSED TIME (HOURS) 10.00 h
CONF 016
ELAPSED TIME (HOURS) 10.00 h
CONF 017
ELAPSED TIME (HOURS) 10.25 h
CONF 018
ELAPSED TIME (HOURS) 10.00 h
CONF 019
ELAPSED TIME (HOURS) 10.00 h
CONF 020
ELAPSED TIME (HOURS) 10.25 h
CONF 021
ELAPSED TIME (HOURS) 10.00 h
CONF 022
ELAPSED TIME (HOURS) 10.25 h
CONF ALL
B. PREPARATION
(1) Task A320-A-34-XX-1712-01001-540A-A (A320-A-34-XX-1712-01ZZZ-540Z-A)
Job Set-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Referenced Information
Manuals/Drawings References/Sheets
Task 12-34-24-869-002
Task 25-54-11-000-001
AMM
Task 31-55-34-000-001
Task 34-52-33-000-001
Procedure
NOTE: For the basic Aircraft configuration, refer to AMM Chapter “Introduction -
Aircraft status for maintenance" in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. AMM Task 12-34-
24-869-002.
(b) Remove the partition Panel 131CW, Panel 131DW and Panel 132EW from the
FWD cargo compartment at Frame 24A, refer to Ref. AMM Task 25-54-11-000-
001.
(c) Do the job set-up procedure as specified in the removal of the System Data
Acquisition Concentrators (SDAC) (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM
Task 31-55-34-000-001.
(d) Do the job set-up procedure as specified in the removal of the ATC/Mode S
transponders (FIN 1SH1 and FIN 1SH2), refer to Ref. AMM Task 34-52-33-000-
001.
CONF 005 007-010 017 020 022
(2) Task A320-A-34-XX-1712-02001-540A-A (A320-A-34-XX-1712-02ZZZ-540Z-A)
Parity Configuration Recording
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Procedure
(a) For the SDAC-1 (FIN 1WV1) parity, before any disconnection, record the figure
number of the hook-up chart on which line 1 agrees with the aircraft wiring
configuration, refer to Ref. Fig. HK and Ref. Fig. HL.
(b) For the SDAC-2 (FIN 1WV2) parity, before any disconnection, record the figure
number of the hook-up chart on which line 1 agrees with the aircraft wiring
configuration, refer to Ref. Fig. HM and Ref. Fig. HN.
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF ALL
C. PROCEDURE
CONF 001
(1) Task A320-A-34-XX-1712-01001-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
AMM
Task 31-55-34-000-001
Task 31-55-34-400-001
REV 00 Dec 21/17 A320-34-1712
REV 12 Mar 11/21 Page 131
A318/A319/A320/A321
SERVICE BULLETIN
Manuals/Drawings References/Sheets
Task 34-52-33-000-001
Task 34-52-33-400-001
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10005 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10005 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
4 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the parity of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WI and Ref. Fig. HI
- Ref. Fig. WJ and Ref. Fig. HJ.
(g) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(h) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(i) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(j) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 001
BEFORE
AA F.R. 30
-
2C R T
7097 31 F.R.
2D B T
-
1813VT
127
81VU
1M F.R.
39
6H R T
-
7093
F.R.
6J B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-00T1R-A-002-01
CONF 001
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
39
2A R T
-
7093
F.R.
2B B U
-
1853VT
127
85VU
F.R. 30
-
R T
7097 31 F.R.
B T
-
- F.R.
1813VT
127
81VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
CONF 001
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 B 1S TK26 81VU 1813VT 31T M1N
6 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 R 1S TK26 81VU 1813VT 30T M1N
11 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 39U EN3155-016M2222 M1N+M2N
12 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 39T EN3155-016M2222 M1N+M2N
25
CONF 001
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
30 F.R. 1S
-
S R 2C
F.R. 31 7096
S B 2D
-
1813VT
127
81VU
54 F.R. 2M
-
A R 6H
F.R. 7083
H B 6J
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1V-A-002-01
CONF 001
AFTER
F.R. 1M AA
39
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
30 F.R. 1S
-
S R
F.R. 31 7096
S B
-
1813VT
127
81VU
54 AB
F.R. 2M
-
A R 4C
F.R. 7083
H B 4D
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1W-A-003-01
CONF 001
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
11 81VU 1813VT 31S 3452-7096 B 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
12 81VU 1813VT 30S 3452-7096 R 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
23 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
24 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
25
CONF 001
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 001
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 001
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 001
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 001
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 001
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 001
BEFORE
AA 33
1B 0482 N
M
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA 34
1B 0482 N
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
59
1B 0501 N
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T22-A-002-01
CONF 001
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 001
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 001
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 001
BEFORE
AB 35
4G 0489 E
- F.R. 1813VT
127
81VU
1SH1 ATC-1
127 81VU
AFTER
AB 36
4G 0489 E
- F.R.
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T27-A-002-01
CONF 001
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 001
BEFORE
AB 60
4G 0508 E
- F.R. 1822VT
128
82VU
1SH2 ATC-2
128 82VU
AFTER
AB 61
4G 0508 E
- F.R.
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
CONF 001
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 001
BEFORE
AE 88
4E 2843 R
S
5C 2839 E
F
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
5C 2821 E
F
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
5C 2839 E
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
5C 2821 E
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 001
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 002
(1) Task A320-A-34-XX-1712-01002-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
Manuals/Drawings References/Sheets
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10002 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10002 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
4 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the parity of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WI and Ref. Fig. HI
- Ref. Fig. WJ and Ref. Fig. HJ.
(g) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(h) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(i) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(j) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 002
BEFORE
AA F.R. 30
-
2C R T
7097 31 F.R.
2D B T
-
1813VT
127
81VU
1M F.R.
39
6H R T
-
7093
F.R.
6J B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-00T1R-A-002-01
CONF 002
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
39
2A R T
-
7093
F.R.
2B B U
-
1853VT
127
85VU
F.R. 30
-
R T
7097 31 F.R.
B T
-
- F.R.
1813VT
127
81VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
CONF 002
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 B 1S TK26 81VU 1813VT 31T M1N
6 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 R 1S TK26 81VU 1813VT 30T M1N
11 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 39U EN3155-016M2222 M1N+M2N
12 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 39T EN3155-016M2222 M1N+M2N
25
CONF 002
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
30 F.R. 1S
-
S R 2C
F.R. 31 7096
S B 2D
-
1813VT
127
81VU
54 F.R. 2M
-
A R 6H
F.R. 7083
H B 6J
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1V-A-002-01
CONF 002
AFTER
F.R. 1M AA
39
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
30 F.R. 1S
-
S R
F.R. 31 7096
S B
-
1813VT
127
81VU
54 AB
F.R. 2M
-
A R 4C
F.R. 7083
H B 4D
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1W-A-003-01
CONF 002
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
11 81VU 1813VT 31S 3452-7096 B 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
12 81VU 1813VT 30S 3452-7096 R 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
23 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
24 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
25
CONF 002
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 002
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 002
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 002
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 002
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 002
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 002
BEFORE
AA 33
1B 0482 N
M
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA 34
1B 0482 N
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
59
1B 0501 N
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T22-A-002-01
CONF 002
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 002
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 002
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 002
BEFORE
AB 35
4G 0489 E
- F.R. 1813VT
127
81VU
1SH1 ATC-1
127 81VU
AFTER
AB 36
4G 0489 E
- F.R.
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T27-A-002-01
CONF 002
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 002
BEFORE
AB 60
4G 0508 E
- F.R. 1822VT
128
82VU
1SH2 ATC-2
128 82VU
AFTER
AB 61
4G 0508 E
- F.R.
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
CONF 002
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 002
BEFORE
AE 88
4E 2843 R
S
5C 2839 E
F
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
5C 2821 E
F
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
5C 2839 E
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
5C 2821 E
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 002
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 003
(1) Task A320-A-34-XX-1712-01003-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
Manuals/Drawings References/Sheets
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10005 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10005 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
4 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(g) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(h) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(i) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 003
BEFORE
AA F.R. 30
-
2C R T
7097 31 F.R.
2D B T
-
1813VT
127
81VU
1M F.R.
39
6H R T
-
7093
F.R.
6J B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-00T1R-A-002-01
CONF 003
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
39
2A R T
-
7093
F.R.
2B B U
-
1853VT
127
85VU
F.R. 30
-
R T
7097 31 F.R.
B T
-
- F.R.
1813VT
127
81VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
CONF 003
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 B 1S TK26 81VU 1813VT 31T M1N
6 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 R 1S TK26 81VU 1813VT 30T M1N
11 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 39U EN3155-016M2222 M1N+M2N
12 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 39T EN3155-016M2222 M1N+M2N
25
CONF 003
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
30 F.R. 1S
-
S R 2C
F.R. 31 7096
S B 2D
-
1813VT
127
81VU
54 F.R. 2M
-
A R 6H
F.R. 7083
H B 6J
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1V-A-002-01
CONF 003
AFTER
F.R. 1M AA
39
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
30 F.R. 1S
-
S R
F.R. 31 7096
S B
-
1813VT
127
81VU
54 AB
F.R. 2M
-
A R 4C
F.R. 7083
H B 4D
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1W-A-003-01
CONF 003
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
11 81VU 1813VT 31S 3452-7096 B 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
12 81VU 1813VT 30S 3452-7096 R 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
23 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
24 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
25
CONF 003
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 003
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 003
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 003
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 003
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 003
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 003
BEFORE
AA 33
1B 0482 N
M
1C 0483 S
R
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1C 0502 S
R
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU AFTER 82VU
AA 32
1B 0482 N
-
34
1C 0483 S
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
57
1B 0501 N
-
59
1C 0502 S
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T23-A-002-01
CONF 003
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 003
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 003
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 003
BEFORE
AE 88
4E 2843 R
S
5C 2839 E
F
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
5C 2821 E
F
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
5C 2839 E
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
5C 2821 E
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 003
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 004
(1) Task A320-A-34-XX-1712-01004-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10100 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10100 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the parity of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WI and Ref. Fig. HI
- Ref. Fig. WJ and Ref. Fig. HJ.
(g) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(h) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(i) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(j) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 004
BEFORE
AA F.R.
1M
39
2C R T
-
7093
F.R.
2D B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-00T1T-A-002-01
CONF 004
AFTER
F.R.
AA 10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
F.R. 83VU
1M
39
2A R T
-
7093
F.R.
2B B U
-
- F.R.
1853VT
127
85VU
F.R.
AB 2M
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 ATC-1
127 81VU
CONF 004
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
19
20
21
22
23
24
25
CONF 004
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
54 F.R. 2M
-
A R 2C
F.R. 7083
H B 2D
-
1862VT
128
86VU 1SH2 XPDR
ATC.2
128 82VU
CONF 004
AFTER
F.R. 1M
39 AA
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
54 F.R. AB
2M
-
A R 4C
F.R. 7083
H B 4D
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1Y-A-002-01
CONF 004
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
19
20
21
22
23
24
25
CONF 004
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 004
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 004
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 004
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 004
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 004
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 004
BEFORE
AA 33
1B 0482 N
M
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA 34
1B 0482 N
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
59
1B 0501 N
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T22-A-002-01
CONF 004
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 004
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 004
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 004
BEFORE
AB 35
4G 0489 E
- F.R. 1813VT
127
81VU
1SH1 ATC-1
127 81VU
AFTER
AB 36
4G 0489 E
- F.R.
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T27-A-002-01
CONF 004
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 004
BEFORE
AB 60
4G 0508 E
- F.R. 1822VT
128
82VU
1SH2 ATC-2
128 82VU
AFTER
AB 61
4G 0508 E
- F.R.
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
CONF 004
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 004
BEFORE
AE 88
4E 2843 R
S
5C 2839 E
F
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
5C 2821 E
F
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
5C 2839 E
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
5C 2821 E
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 004
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 005
(1) Task A320-A-34-XX-1712-01005-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
Manuals/Drawings References/Sheets
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10005 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10005 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
4 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the parity of ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WI and Ref. Fig. HI
- Ref. Fig. WJ and Ref. Fig. HJ.
(g) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(h) Modify the parity of the SDAC-1 (FIN 1WV1).
Refer to Ref. ESPM 20-33-00
1 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HK:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WK and Ref. Fig. HK.
2 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HL:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WL and Ref. Fig. HL.
(i) Modify the parity of SDAC-2 (FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HM:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WM and Ref. Fig. HM.
2 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HN:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
REV 00 Dec 21/17 A320-34-1712
REV 12 Mar 11/21 Page 229
A318/A319/A320/A321
SERVICE BULLETIN
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(l) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 005
BEFORE
AA F.R. 30
-
2C R T
7097 31 F.R.
2D B T
-
1813VT
127
81VU
1M F.R.
39
6H R T
-
7093
F.R.
6J B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-00T1R-A-002-01
CONF 005
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
39
2A R T
-
7093
F.R.
2B B U
-
1853VT
127
85VU
F.R. 30
-
R T
7097 31 F.R.
B T
-
- F.R.
1813VT
127
81VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
CONF 005
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 B 1S TK26 81VU 1813VT 31T M1N
6 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 R 1S TK26 81VU 1813VT 30T M1N
11 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 39U EN3155-016M2222 M1N+M2N
12 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 39T EN3155-016M2222 M1N+M2N
25
CONF 005
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
30 F.R. 1S
-
S R 2C
F.R. 31 7096
S B 2D
-
1813VT
127
81VU
54 F.R. 2M
-
A R 6H
F.R. 7083
H B 6J
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1V-A-002-01
CONF 005
AFTER
F.R. 1M AA
39
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
30 F.R. 1S
-
S R
F.R. 31 7096
S B
-
1813VT
127
81VU
54 AB
F.R. 2M
-
A R 4C
F.R. 7083
H B 4D
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1W-A-003-01
CONF 005
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
11 81VU 1813VT 31S 3452-7096 B 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
12 81VU 1813VT 30S 3452-7096 R 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
23 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
24 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
25
CONF 005
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 005
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 005
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 005
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 005
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 005
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 005
BEFORE
AA 33
1B 0482 N
M
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA 34
1B 0482 N
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
59
1B 0501 N
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T22-A-002-01
CONF 005
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 005
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 005
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 005
BEFORE
AB 35
4G 0489 E
- F.R. 1813VT
127
81VU
1SH1 ATC-1
127 81VU
AFTER
AB 36
4G 0489 E
- F.R.
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T27-A-002-01
CONF 005
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 005
BEFORE
AB 60
4G 0508 E
- F.R. 1822VT
128
82VU
1SH2 ATC-2
128 82VU
AFTER
AB 61
4G 0508 E
- F.R.
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
CONF 005
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 005
BEFORE
AE 88
4E 2843 R
S
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 005
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 005
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 005
BEFORE
AA 94
1J 1782 A
- F.R. 1851VT
127
85VU
1WV1 SDAC-1
127 85VU
AFTER
AA 95
1J 1782 A
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
CONF 005
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 005
BEFORE
AA 95
1J 1782 A
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AFTER
AA 94
1J 1782 A
- F.R. 1851VT
127
85VU
1WV1 SDAC-1
127 85VU
CONF 005
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 005
BEFORE
AA 1
1J 1812 A
- F.R. 1860VT
128
86VU
1WV2 SDAC-2
128 86VU
AFTER
AA 2
1J 1812 A
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 005
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 005
BEFORE
AA 2
1J 1812 A
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AA 1
1J 1812 A
- F.R. 1860VT
128
86VU
1WV2 SDAC-2
128 86VU
CONF 006
(1) Task A320-A-34-XX-1712-01006-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer tor Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10100 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10100 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(g) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(h) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(i) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 006
BEFORE
AA F.R.
1M
39
2C R T
-
7093
F.R.
2D B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-00T1T-A-002-01
CONF 006
AFTER
F.R.
AA 10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
F.R. 83VU
1M
39
2A R T
-
7093
F.R.
2B B U
-
- F.R.
1853VT
127
85VU
F.R.
AB 2M
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 ATC-1
127 81VU
CONF 006
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
19
20
21
22
23
24
25
CONF 006
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
54 F.R. 2M
-
A R 2C
F.R. 7083
H B 2D
-
1862VT
128
86VU 1SH2 XPDR
ATC.2
128 82VU
CONF 006
AFTER
F.R. 1M
39 AA
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
54 F.R. AB
2M
-
A R 4C
F.R. 7083
H B 4D
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1Y-A-002-01
CONF 006
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
19
20
21
22
23
24
25
CONF 006
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 006
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 006
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 006
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 006
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 006
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 006
BEFORE
AA 33
1B 0482 N
M
1C 0483 S
R
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1C 0502 S
R
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU AFTER 82VU
AA 32
1B 0482 N
-
34
1C 0483 S
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
57
1B 0501 N
-
59
1C 0502 S
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T23-A-002-01
CONF 006
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 006
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 006
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 006
BEFORE
AE 88
4E 2843 R
S
5C 2839 E
F
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
5C 2821 E
F
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
5C 2839 E
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
5C 2821 E
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 006
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10100 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10100 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the parity of ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WI and Ref. Fig. HI
- Ref. Fig. WJ and Ref. Fig. HJ.
(g) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(h) Modify the parity of the SDAC-1 (FIN 1WV1).
Refer to Ref. ESPM 20-33-00
1 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HK:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WK and Ref. Fig. HK.
2 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HL:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WL and Ref. Fig. HL.
(i) Modify the parity of SDAC-2 (FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HM:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WM and Ref. Fig. HM.
2 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HN:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WN and Ref. Fig. HN.
(j) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(k) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(l) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
BEFORE
AA F.R.
1M
39
2C R T
-
7093
F.R.
2D B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-00T1T-A-002-01
AFTER
F.R.
AA 10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
F.R. 83VU
1M
39
2A R T
-
7093
F.R.
2B B U
-
- F.R.
1853VT
127
85VU
F.R.
AB 2M
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 ATC-1
127 81VU
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
19
20
21
22
23
24
25
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
54 F.R. 2M
-
A R 2C
F.R. 7083
H B 2D
-
1862VT
128
86VU 1SH2 XPDR
ATC.2
128 82VU
AFTER
F.R. 1M
39 AA
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
54 F.R. AB
2M
-
A R 4C
F.R. 7083
H B 4D
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1Y-A-002-01
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
19
20
21
22
23
24
25
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
BEFORE
AA 33
1B 0482 N
M
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA 34
1B 0482 N
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
59
1B 0501 N
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T22-A-002-01
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
BEFORE
AB 35
4G 0489 E
- F.R. 1813VT
127
81VU
1SH1 ATC-1
127 81VU
AFTER
AB 36
4G 0489 E
- F.R.
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T27-A-002-01
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
BEFORE
AB 60
4G 0508 E
- F.R. 1822VT
128
82VU
1SH2 ATC-2
128 82VU
AFTER
AB 61
4G 0508 E
- F.R.
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
BEFORE
AE 88
4E 2843 R
S
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
BEFORE
AA 94
1J 1782 A
- F.R. 1851VT
127
85VU
1WV1 SDAC-1
127 85VU
AFTER
AA 95
1J 1782 A
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
BEFORE
AA 95
1J 1782 A
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AFTER
AA 94
1J 1782 A
- F.R. 1851VT
127
85VU
1WV1 SDAC-1
127 85VU
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
BEFORE
AA 1
1J 1812 A
- F.R. 1860VT
128
86VU
1WV2 SDAC-2
128 86VU
AFTER
AA 2
1J 1812 A
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
BEFORE
AA 2
1J 1812 A
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AA 1
1J 1812 A
- F.R. 1860VT
128
86VU
1WV2 SDAC-2
128 86VU
CONF 008
(1) Task A320-A-34-XX-1712-01009-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10100 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10100 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(g) Modify the parity of the SDAC-1 (FIN 1WV1).
Refer to Ref. ESPM 20-33-00
1 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HK:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WK and Ref. Fig. HK.
2 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HL:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WL and Ref. Fig. HL.
(h) Modify the parity of SDAC-2 (FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HM:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WM and Ref. Fig. HM.
2 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HN:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WN and Ref. Fig. HN.
(i) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(j) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(k) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 008
BEFORE
AA F.R.
1M
39
2C R T
-
7093
F.R.
2D B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-00T1T-A-002-01
CONF 008
AFTER
F.R.
AA 10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
F.R. 83VU
1M
39
2A R T
-
7093
F.R.
2B B U
-
- F.R.
1853VT
127
85VU
F.R.
AB 2M
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 ATC-1
127 81VU
CONF 008
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
19
20
21
22
23
24
25
CONF 008
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
54 F.R. 2M
-
A R 2C
F.R. 7083
H B 2D
-
1862VT
128
86VU 1SH2 XPDR
ATC.2
128 82VU
CONF 008
AFTER
F.R. 1M
39 AA
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
54 F.R. AB
2M
-
A R 4C
F.R. 7083
H B 4D
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1Y-A-002-01
CONF 008
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
19
20
21
22
23
24
25
CONF 008
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 008
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 008
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 008
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 008
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 008
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 008
BEFORE
AA 33
1B 0482 N
M
1C 0483 S
R
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1C 0502 S
R
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU AFTER 82VU
AA 32
1B 0482 N
-
34
1C 0483 S
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
57
1B 0501 N
-
59
1C 0502 S
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T23-A-002-01
CONF 008
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 008
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 008
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 008
BEFORE
AE 88
4E 2843 R
S
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 008
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 008
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 008
BEFORE
AA 94
1J 1782 A
- F.R. 1851VT
127
85VU
1WV1 SDAC-1
127 85VU
AFTER
AA 95
1J 1782 A
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
CONF 008
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 008
BEFORE
AA 95
1J 1782 A
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AFTER
AA 94
1J 1782 A
- F.R. 1851VT
127
85VU
1WV1 SDAC-1
127 85VU
CONF 008
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 008
BEFORE
AA 1
1J 1812 A
- F.R. 1860VT
128
86VU
1WV2 SDAC-2
128 86VU
AFTER
AA 2
1J 1812 A
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 008
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 008
BEFORE
AA 2
1J 1812 A
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AA 1
1J 1812 A
- F.R. 1860VT
128
86VU
1WV2 SDAC-2
128 86VU
CONF 009
(1) Task A320-A-34-XX-1712-01010-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
Manuals/Drawings References/Sheets
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10005 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10005 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
4 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(g) Modify the parity of the SDAC-1 (FIN 1WV1).
Refer to Ref. ESPM 20-33-00
1 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HK:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WK and Ref. Fig. HK.
2 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HL:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WL and Ref. Fig. HL.
(h) Modify the parity of SDAC-2 (FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HM:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WM and Ref. Fig. HM.
2 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HN:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WN and Ref. Fig. HN.
(i) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(j) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(k) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 009
BEFORE
AA F.R. 30
-
2C R T
7097 31 F.R.
2D B T
-
1813VT
127
81VU
1M F.R.
39
6H R T
-
7093
F.R.
6J B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-00T1R-A-002-01
CONF 009
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
39
2A R T
-
7093
F.R.
2B B U
-
1853VT
127
85VU
F.R. 30
-
R T
7097 31 F.R.
B T
-
- F.R.
1813VT
127
81VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
CONF 009
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 B 1S TK26 81VU 1813VT 31T M1N
6 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 R 1S TK26 81VU 1813VT 30T M1N
11 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 39U EN3155-016M2222 M1N+M2N
12 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 39T EN3155-016M2222 M1N+M2N
25
CONF 009
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
30 F.R. 1S
-
S R 2C
F.R. 31 7096
S B 2D
-
1813VT
127
81VU
54 F.R. 2M
-
A R 6H
F.R. 7083
H B 6J
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1V-A-002-01
CONF 009
AFTER
F.R. 1M AA
39
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
30 F.R. 1S
-
S R
F.R. 31 7096
S B
-
1813VT
127
81VU
54 AB
F.R. 2M
-
A R 4C
F.R. 7083
H B 4D
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1W-A-003-01
CONF 009
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
11 81VU 1813VT 31S 3452-7096 B 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
12 81VU 1813VT 30S 3452-7096 R 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
23 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
24 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
25
CONF 009
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 009
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 009
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 009
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 009
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 009
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 009
BEFORE
AA 33
1B 0482 N
M
1C 0483 S
R
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1C 0502 S
R
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU AFTER 82VU
AA 32
1B 0482 N
-
34
1C 0483 S
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
57
1B 0501 N
-
59
1C 0502 S
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T23-A-002-01
CONF 009
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 009
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 009
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 009
BEFORE
AE 88
4E 2843 R
S
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 009
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 009
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 009
BEFORE
AA 94
1J 1782 A
- F.R. 1851VT
127
85VU
1WV1 SDAC-1
127 85VU
AFTER
AA 95
1J 1782 A
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
CONF 009
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 009
BEFORE
AA 95
1J 1782 A
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AFTER
AA 94
1J 1782 A
- F.R. 1851VT
127
85VU
1WV1 SDAC-1
127 85VU
CONF 009
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 009
BEFORE
AA 1
1J 1812 A
- F.R. 1860VT
128
86VU
1WV2 SDAC-2
128 86VU
AFTER
AA 2
1J 1812 A
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 009
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 009
BEFORE
AA 2
1J 1812 A
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AA 1
1J 1812 A
- F.R. 1860VT
128
86VU
1WV2 SDAC-2
128 86VU
CONF 011
(1) Task A320-A-34-XX-1712-01012-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
Manuals/Drawings References/Sheets
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10002 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10002 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
4 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(g) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(h) Install, refer to Ref. AMM Task 34-52-33-400-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(i) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 011
BEFORE
AA F.R. 30
-
2C R T
7097 31 F.R.
2D B T
-
1813VT
127
81VU
1M F.R.
39
6H R T
-
7093
F.R.
6J B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-00T1R-A-002-01
CONF 011
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
39
2A R T
-
7093
F.R.
2B B U
-
1853VT
127
85VU
F.R. 30
-
R T
7097 31 F.R.
B T
-
- F.R.
1813VT
127
81VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
CONF 011
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 B 1S TK26 81VU 1813VT 31T M1N
6 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 R 1S TK26 81VU 1813VT 30T M1N
11 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 39U EN3155-016M2222 M1N+M2N
12 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 39T EN3155-016M2222 M1N+M2N
25
CONF 011
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
30 F.R. 1S
-
S R 2C
F.R. 31 7096
S B 2D
-
1813VT
127
81VU
54 F.R. 2M
-
A R 6H
F.R. 7083
H B 6J
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1V-A-002-01
CONF 011
AFTER
F.R. 1M AA
39
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
30 F.R. 1S
-
S R
F.R. 31 7096
S B
-
1813VT
127
81VU
54 AB
F.R. 2M
-
A R 4C
F.R. 7083
H B 4D
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1W-A-003-01
CONF 011
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
11 81VU 1813VT 31S 3452-7096 B 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
12 81VU 1813VT 30S 3452-7096 R 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
23 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
24 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
25
CONF 011
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 011
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 011
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 011
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 011
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 011
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 011
BEFORE
AA 33
1B 0482 N
M
1C 0483 S
R
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1C 0502 S
R
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU AFTER 82VU
AA 32
1B 0482 N
-
34
1C 0483 S
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
57
1B 0501 N
-
59
1C 0502 S
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T23-A-002-01
CONF 011
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 011
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 011
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 011
BEFORE
AE 88
4E 2843 R
S
5C 2839 E
F
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
5C 2821 E
F
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
5C 2839 E
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
5C 2821 E
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 011
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 012
(1) Task A320-A-34-XX-1712-01013-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10005 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10005 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the parity of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WI and Ref. Fig. HI
- Ref. Fig. WJ and Ref. Fig. HJ.
(g) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(h) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(i) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(j) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 012
BEFORE
F.R. 30
AA
-
2C R T
7097 31 F.R.
2D B T
-
1813VT
127
81VU
1M F.R.
31
6H R A
-
7093
F.R.
6J B H
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 XPDR 86VU
ATC-1
127 81VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-01DM4-A-001-01
CONF 012
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
31
2A R A
-
7093
F.R.
2B B H
-
1853VT
127
85VU
F.R. 30
-
R T
7097 31 F.R.
B T
-
- F.R.
1813VT
127
81VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
CONF 012
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 B 1S TK26 81VU 1813VT 31T M1N
6 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 R 1S TK26 81VU 1813VT 30T M1N
11 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 31H EN3155-016M2222 M1N+M2N
12 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 31A EN3155-016M2222 M1N+M2N
25
CONF 012
BEFORE
AA
F.R. 1M
31
F R
-
7147
F.R.
P B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
30 F.R. 1S
-
S R 2C
F.R. 31 7096
S B 2D
-
1813VT
127
81VU
54 F.R. 2M
-
A R 6H
F.R. 7083
H B 6J
-
1862VT 1SH2 XPDR
128 ATC.2
86VU 128 82VU
CONF 012
AFTER
F.R. 1M AA
31
F R 2A
-
7147
F.R.
P B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
30 F.R. 1S
-
S R
F.R. 31 7096
S B
-
1813VT
127
81VU
54 F.R. 2M AB
-
A R 4C
F.R. 7083
H B 4D
-
1862VT 1SH2 XPDR
128 ATC.2
86VU 128 82VU
NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-01DM3-A-002-01
CONF 012
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
11 81VU 1813VT 31S 3452-7096 B 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
12 81VU 1813VT 30S 3452-7096 R 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
23 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
24 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
25
CONF 012
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 012
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 012
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 012
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 012
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 012
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 012
BEFORE
AA 33
1B 0482 N
M
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA 34
1B 0482 N
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
59
1B 0501 N
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T22-A-002-01
CONF 012
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 012
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 012
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 012
BEFORE
AB 35
4G 0489 E
- F.R. 1813VT
127
81VU
1SH1 ATC-1
127 81VU
AFTER
AB 36
4G 0489 E
- F.R.
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T27-A-002-01
CONF 012
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 012
BEFORE
AB 60
4G 0508 E
- F.R. 1822VT
128
82VU
1SH2 ATC-2
128 82VU
AFTER
AB 61
4G 0508 E
- F.R.
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
CONF 012
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 012
BEFORE
AE 88
4E 2843 R
S
5C 2839 E
F
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
5C 2821 E
F
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
5C 2839 E
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
5C 2821 E
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 012
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 013
(1) Task A320-A-34-XX-1712-01014-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10005 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10005 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2)
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(g) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(h) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(i) Install the SDACs (FIN 1WV1 and FIN 1SH2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 013
BEFORE
F.R. 30
AA
-
2C R T
7097 31 F.R.
2D B T
-
1813VT
127
81VU
1M F.R.
31
6H R A
-
7093
F.R.
6J B H
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 XPDR 86VU
ATC-1
127 81VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-01DM4-A-001-01
CONF 013
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
31
2A R A
-
7093
F.R.
2B B H
-
1853VT
127
85VU
F.R. 30
-
R T
7097 31 F.R.
B T
-
- F.R.
1813VT
127
81VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
CONF 013
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 B 1S TK26 81VU 1813VT 31T M1N
6 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 R 1S TK26 81VU 1813VT 30T M1N
11 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 31H EN3155-016M2222 M1N+M2N
12 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 31A EN3155-016M2222 M1N+M2N
25
CONF 013
BEFORE
AA
F.R. 1M
31
F R
-
7147
F.R.
P B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
30 F.R. 1S
-
S R 2C
F.R. 31 7096
S B 2D
-
1813VT
127
81VU
54 F.R. 2M
-
A R 6H
F.R. 7083
H B 6J
-
1862VT 1SH2 XPDR
128 ATC.2
86VU 128 82VU
CONF 013
AFTER
F.R. 1M AA
31
F R 2A
-
7147
F.R.
P B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
30 F.R. 1S
-
S R
F.R. 31 7096
S B
-
1813VT
127
81VU
54 F.R. 2M AB
-
A R 4C
F.R. 7083
H B 4D
-
1862VT 1SH2 XPDR
128 ATC.2
86VU 128 82VU
NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-01DM3-A-002-01
CONF 013
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
11 81VU 1813VT 31S 3452-7096 B 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
12 81VU 1813VT 30S 3452-7096 R 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
23 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
24 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
25
CONF 013
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 013
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 013
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 013
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 013
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 013
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 013
BEFORE
AA 33
1B 0482 N
M
1C 0483 S
R
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1C 0502 S
R
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU AFTER 82VU
AA 32
1B 0482 N
-
34
1C 0483 S
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
57
1B 0501 N
-
59
1C 0502 S
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T23-A-002-01
CONF 013
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 013
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 013
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 013
BEFORE
AE 88
4E 2843 R
S
5C 2839 E
F
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
5C 2821 E
F
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
5C 2839 E
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
5C 2821 E
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 013
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 014
(1) Task A320-A-34-XX-1712-01015-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
Manuals/Drawings References/Sheets
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10005 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10005 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
4 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the parity of the ATCs (FIN 1SH1 and FIN 1SH2)
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WI and Ref. Fig. HI
- Ref. Fig. WJ and Ref. Fig. HJ.
(g) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2)
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(h) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(i) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(j) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 014
BEFORE
1M F.R.
AA 39
R T
-
7093
F.R.
B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
EXISTING WIRE OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-01H4B-A-001-01
CONF 014
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
39
2A R T
-
7093
F.R.
2B B U
-
- F.R. 1853VT
127
85VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-01H4C-A-001-01
CONF 014
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 39U EN3155-016M2222 M1N+M2N
6 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 39T EN3155-016M2222 M1N+M2N
19
20
21
22
23
24
25
CONF 014
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
54 F.R. 2M
-
A R
F.R. 7083
H B
-
F.R. -
1862VT
128
86VU 1SH2 XPDR
ATC.2
128 82VU
EXISTING WIRE OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-01H49-A-001-01
CONF 014
AFTER
F.R. 1M AA
39
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
F.R. -
1840VT
128
84VU
54 F.R. 2M AB
-
A R 4C
F.R. 7083
H B 4D
-
F.R. -
1862VT
128
86VU 1SH2 XPDR
ATC.2
128 82VU
NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-01H4A-A-002-01
CONF 014
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
18 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
19
20
21
22
23
24
25
CONF 014
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 014
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 014
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 014
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 014
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 014
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 014
BEFORE
AA 33
1B 0482 N
M
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA 34
1B 0482 N
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
59
1B 0501 N
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T22-A-002-01
CONF 014
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 014
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 014
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 014
BEFORE
AB 35
4G 0489 E
- F.R. 1813VT
127
81VU
1SH1 ATC-1
127 81VU
AFTER
AB 36
4G 0489 E
- F.R.
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T27-A-002-01
CONF 014
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 014
BEFORE
AB 60
4G 0508 E
- F.R. 1822VT
128
82VU
1SH2 ATC-2
128 82VU
AFTER
AB 61
4G 0508 E
- F.R.
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
CONF 014
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 014
BEFORE
AE 88
4E 2843 R
S
5C 2839 E
F
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
5C 2821 E
F
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
5C 2839 E
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
5C 2821 E
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 014
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 015
(1) Task A320-A-34-XX-1712-01016-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10005 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10005 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2)
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(g) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(h) Install, refer to Ref. AMM Task 34-52-33-400-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(i) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 015
BEFORE
AA
1M F.R.
31
R A
-
7093
F.R.
B H
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 XPDR 86VU
ATC-1
127 81VU
EXISTING WIRE OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-01H47-A-001-01
CONF 015
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
31
2A R A
-
7093
F.R.
2B B H
-
- F.R. 1853VT
127
85VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-01H48-A-001-01
CONF 015
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 31H EN3155-016M2222 M1N+M2N
6 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 31A EN3155-016M2222 M1N+M2N
19
20
21
22
23
24
25
CONF 015
BEFORE
AA
F.R. 1M
31
F R
-
7147
F.R.
P B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
54 F.R. 2M
-
A R
F.R. 7083
H B
-
F.R. -
1862VT
128
86VU 1SH2 XPDR
ATC.2
128 82VU
EXISTING WIRE OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-01H4D-A-001-01
CONF 015
AFTER
F.R. 1M AA
31
F R 2A
-
7147
F.R.
P B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
F.R. -
1840VT
128
84VU
54 F.R. 2M AB
-
A R 4C
F.R. 7083
H B 4D
-
F.R. -
1862VT
128
86VU 1SH2 XPDR
ATC.2
128 82VU
NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-01H4E-A-002-01
CONF 015
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
18 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
19
20
21
22
23
24
25
CONF 015
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 015
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 015
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 015
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 015
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 015
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 015
BEFORE
AA 33
1B 0482 N
M
1C 0483 S
R
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1C 0502 S
R
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU AFTER 82VU
AA 32
1B 0482 N
-
34
1C 0483 S
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
57
1B 0501 N
-
59
1C 0502 S
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T23-A-002-01
CONF 015
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 015
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 015
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 015
BEFORE
AE 88
4E 2843 R
S
5C 2839 E
F
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
5C 2821 E
F
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
5C 2839 E
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
5C 2821 E
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 015
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 016
(1) Task A320-A-34-XX-1712-01017-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
Manuals/Drawings References/Sheets
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10010 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10010 Discard
(d) Modify the wiring.
Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
4 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(g) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(h) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(i) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 016
BEFORE
AA F.R. 30
-
2C R T
7097 31 F.R.
2D B T
-
1813VT
127
81VU
1M F.R.
39
6H R T
-
7093
F.R.
6J B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-00T1R-A-002-01
CONF 016
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
39
2A R T
-
7093
F.R.
2B B U
-
1853VT
127
85VU
F.R. 30
-
R T
7097 31 F.R.
B T
-
- F.R.
1813VT
127
81VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
CONF 016
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 B 1S TK26 81VU 1813VT 31T M1N
6 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 R 1S TK26 81VU 1813VT 30T M1N
11 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 39U EN3155-016M2222 M1N+M2N
12 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 39T EN3155-016M2222 M1N+M2N
25
CONF 016
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
30 F.R. 1S
-
S R 2C
F.R. 31 7096
S B 2D
-
1813VT
127
81VU
54 F.R. 2M
-
A R 6H
F.R. 7083
H B 6J
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1V-A-002-01
CONF 016
AFTER
F.R. 1M AA
39
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
30 F.R. 1S
-
S R
F.R. 31 7096
S B
-
1813VT
127
81VU
54 AB
F.R. 2M
-
A R 4C
F.R. 7083
H B 4D
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1W-A-003-01
CONF 016
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
11 81VU 1813VT 31S 3452-7096 B 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
12 81VU 1813VT 30S 3452-7096 R 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
23 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
24 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
25
CONF 016
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 016
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 016
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 016
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 016
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 016
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 016
BEFORE
AA 33
1B 0482 N
M
1C 0483 S
R
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1C 0502 S
R
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU AFTER 82VU
AA 32
1B 0482 N
-
34
1C 0483 S
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
57
1B 0501 N
-
59
1C 0502 S
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T23-A-002-01
CONF 016
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 016
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 016
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 016
BEFORE
AE 88
4E 2843 R
S
5C 2839 E
F
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
5C 2821 E
F
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
5C 2839 E
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
5C 2821 E
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 016
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 017
(1) Task A320-A-34-XX-1712-01018-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
Manuals/Drawings References/Sheets
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10010 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10010 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
4 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(g) Modify the parity of the SDAC-1 (FIN 1WV1).
Refer to Ref. ESPM 20-33-00
1 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HK:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WK and Ref. Fig. HK.
2 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HL:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WL and Ref. Fig. HL.
(h) Modify the parity of SDAC-2 (FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HM:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WM and Ref. Fig. HM.
2 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HN:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WN and Ref. Fig. HN.
(i) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(j) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(k) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 017
BEFORE
AA F.R. 30
-
2C R T
7097 31 F.R.
2D B T
-
1813VT
127
81VU
1M F.R.
39
6H R T
-
7093
F.R.
6J B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-00T1R-A-002-01
CONF 017
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
39
2A R T
-
7093
F.R.
2B B U
-
1853VT
127
85VU
F.R. 30
-
R T
7097 31 F.R.
B T
-
- F.R.
1813VT
127
81VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
CONF 017
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 B 1S TK26 81VU 1813VT 31T M1N
6 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 R 1S TK26 81VU 1813VT 30T M1N
11 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 39U EN3155-016M2222 M1N+M2N
12 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 39T EN3155-016M2222 M1N+M2N
25
CONF 017
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
30 F.R. 1S
-
S R 2C
F.R. 31 7096
S B 2D
-
1813VT
127
81VU
54 F.R. 2M
-
A R 6H
F.R. 7083
H B 6J
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1V-A-002-01
CONF 017
AFTER
F.R. 1M AA
39
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
30 F.R. 1S
-
S R
F.R. 31 7096
S B
-
1813VT
127
81VU
54 AB
F.R. 2M
-
A R 4C
F.R. 7083
H B 4D
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1W-A-003-01
CONF 017
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
11 81VU 1813VT 31S 3452-7096 B 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
12 81VU 1813VT 30S 3452-7096 R 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
23 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
24 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
25
CONF 017
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 017
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 017
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 017
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 017
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 017
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 017
BEFORE
AA 33
1B 0482 N
M
1C 0483 S
R
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1C 0502 S
R
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU AFTER 82VU
AA 32
1B 0482 N
-
34
1C 0483 S
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
57
1B 0501 N
-
59
1C 0502 S
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T23-A-002-01
CONF 017
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 017
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 017
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 017
BEFORE
AE 88
4E 2843 R
S
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 017
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 017
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 017
BEFORE
AA 94
1J 1782 A
- F.R. 1851VT
127
85VU
1WV1 SDAC-1
127 85VU
AFTER
AA 95
1J 1782 A
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
CONF 017
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 017
BEFORE
AA 95
1J 1782 A
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AFTER
AA 94
1J 1782 A
- F.R. 1851VT
127
85VU
1WV1 SDAC-1
127 85VU
CONF 017
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 017
BEFORE
AA 1
1J 1812 A
- F.R. 1860VT
128
86VU
1WV2 SDAC-2
128 86VU
AFTER
AA 2
1J 1812 A
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 017
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 017
BEFORE
AA 2
1J 1812 A
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AA 1
1J 1812 A
- F.R. 1860VT
128
86VU
1WV2 SDAC-2
128 86VU
CONF 018
(1) Task A320-A-34-XX-1712-01019-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
Manuals/Drawings References/Sheets
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10010 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10010 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
4 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the parity of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WI and Ref. Fig. HI
- Ref. Fig. WJ and Ref. Fig. HJ.
(g) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(h) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(i) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(j) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 018
BEFORE
AA F.R. 30
-
2C R T
7097 31 F.R.
2D B T
-
1813VT
127
81VU
1M F.R.
39
6H R T
-
7093
F.R.
6J B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-00T1R-A-002-01
CONF 018
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
39
2A R T
-
7093
F.R.
2B B U
-
1853VT
127
85VU
F.R. 30
-
R T
7097 31 F.R.
B T
-
- F.R.
1813VT
127
81VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
CONF 018
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 B 1S TK26 81VU 1813VT 31T M1N
6 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 R 1S TK26 81VU 1813VT 30T M1N
11 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 39U EN3155-016M2222 M1N+M2N
12 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 39T EN3155-016M2222 M1N+M2N
25
CONF 018
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
30 F.R. 1S
-
S R 2C
F.R. 31 7096
S B 2D
-
1813VT
127
81VU
54 F.R. 2M
-
A R 6H
F.R. 7083
H B 6J
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1V-A-002-01
CONF 018
AFTER
F.R. 1M AA
39
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
30 F.R. 1S
-
S R
F.R. 31 7096
S B
-
1813VT
127
81VU
54 AB
F.R. 2M
-
A R 4C
F.R. 7083
H B 4D
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1W-A-003-01
CONF 018
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
11 81VU 1813VT 31S 3452-7096 B 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
12 81VU 1813VT 30S 3452-7096 R 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
23 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
24 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
25
CONF 018
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 018
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 018
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 018
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 018
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 018
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 018
BEFORE
AA 33
1B 0482 N
M
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA 34
1B 0482 N
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
59
1B 0501 N
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T22-A-002-01
CONF 018
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 018
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 018
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 018
BEFORE
AB 35
4G 0489 E
- F.R. 1813VT
127
81VU
1SH1 ATC-1
127 81VU
AFTER
AB 36
4G 0489 E
- F.R.
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T27-A-002-01
CONF 018
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 018
BEFORE
AB 60
4G 0508 E
- F.R. 1822VT
128
82VU
1SH2 ATC-2
128 82VU
AFTER
AB 61
4G 0508 E
- F.R.
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
CONF 018
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 018
BEFORE
AE 88
4E 2843 R
S
5C 2839 E
F
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
5C 2821 E
F
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
5C 2839 E
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
5C 2821 E
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 018
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 019
(1) Task A320-A-34-XX-1712-01020-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10002 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10002 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the parity of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WI and Ref. Fig. HI
- Ref. Fig. WJ and Ref. Fig. HJ.
(g) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(h) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(i) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(j) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 019
BEFORE
F.R. 30
AA
-
2C R T
7097 31 F.R.
2D B T
-
1813VT
127
81VU
1M F.R.
31
6H R A
-
7093
F.R.
6J B H
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 XPDR 86VU
ATC-1
127 81VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-01DM4-A-001-01
CONF 019
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
31
2A R A
-
7093
F.R.
2B B H
-
1853VT
127
85VU
F.R. 30
-
R T
7097 31 F.R.
B T
-
- F.R.
1813VT
127
81VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
CONF 019
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 B 1S TK26 81VU 1813VT 31T M1N
6 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 R 1S TK26 81VU 1813VT 30T M1N
11 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 31H EN3155-016M2222 M1N+M2N
12 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 31A EN3155-016M2222 M1N+M2N
25
CONF 019
BEFORE
AA
F.R. 1M
31
F R
-
7147
F.R.
P B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
30 F.R. 1S
-
S R 2C
F.R. 31 7096
S B 2D
-
1813VT
127
81VU
54 F.R. 2M
-
A R 6H
F.R. 7083
H B 6J
-
1862VT 1SH2 XPDR
128 ATC.2
86VU 128 82VU
CONF 019
AFTER
F.R. 1M AA
31
F R 2A
-
7147
F.R.
P B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
30 F.R. 1S
-
S R
F.R. 31 7096
S B
-
1813VT
127
81VU
54 F.R. 2M AB
-
A R 4C
F.R. 7083
H B 4D
-
1862VT 1SH2 XPDR
128 ATC.2
86VU 128 82VU
NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-01DM3-A-002-01
CONF 019
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
11 81VU 1813VT 31S 3452-7096 B 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
12 81VU 1813VT 30S 3452-7096 R 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
23 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
24 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
25
CONF 019
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 019
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 019
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 019
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 019
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 019
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 019
BEFORE
AA 33
1B 0482 N
M
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA 34
1B 0482 N
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
59
1B 0501 N
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T22-A-002-01
CONF 019
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 019
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 019
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 019
BEFORE
AB 35
4G 0489 E
- F.R. 1813VT
127
81VU
1SH1 ATC-1
127 81VU
AFTER
AB 36
4G 0489 E
- F.R.
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T27-A-002-01
CONF 019
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 019
BEFORE
AB 60
4G 0508 E
- F.R. 1822VT
128
82VU
1SH2 ATC-2
128 82VU
AFTER
AB 61
4G 0508 E
- F.R.
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
CONF 019
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 019
BEFORE
AE 88
4E 2843 R
S
5C 2839 E
F
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
5C 2821 E
F
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
5C 2839 E
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
5C 2821 E
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 019
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 020
(1) Task A320-A-34-XX-1712-01021-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
Manuals/Drawings References/Sheets
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10010 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10010 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
4 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the parity of ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WI and Ref. Fig. HI
- Ref. Fig. WJ and Ref. Fig. HJ.
(g) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(h) Modify the parity of the SDAC-1 (FIN 1WV1).
Refer to Ref. ESPM 20-33-00
1 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HK:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WK and Ref. Fig. HK.
2 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HL:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WL and Ref. Fig. HL.
(i) Modify the parity of SDAC-2 (FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HM:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WM and Ref. Fig. HM.
2 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HN:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
REV 00 Dec 21/17 A320-34-1712
REV 12 Mar 11/21 Page 591
A318/A319/A320/A321
SERVICE BULLETIN
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(l) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 020
BEFORE
AA F.R. 30
-
2C R T
7097 31 F.R.
2D B T
-
1813VT
127
81VU
1M F.R.
39
6H R T
-
7093
F.R.
6J B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-00T1R-A-002-01
CONF 020
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
39
2A R T
-
7093
F.R.
2B B U
-
1853VT
127
85VU
F.R. 30
-
R T
7097 31 F.R.
B T
-
- F.R.
1813VT
127
81VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
CONF 020
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 B 1S TK26 81VU 1813VT 31T M1N
6 81VU 1SH1-AA W.S. NSA936604CA0931 3452-7097 R 1S TK26 81VU 1813VT 30T M1N
11 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 39U EN3155-016M2222 M1N+M2N
12 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 39T EN3155-016M2222 M1N+M2N
25
CONF 020
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
30 F.R. 1S
-
S R 2C
F.R. 31 7096
S B 2D
-
1813VT
127
81VU
54 F.R. 2M
-
A R 6H
F.R. 7083
H B 6J
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1V-A-002-01
CONF 020
AFTER
F.R. 1M AA
39
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
30 F.R. 1S
-
S R
F.R. 31 7096
S B
-
1813VT
127
81VU
54 AB
F.R. 2M
-
A R 4C
F.R. 7083
H B 4D
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1W-A-003-01
CONF 020
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
11 81VU 1813VT 31S 3452-7096 B 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
12 81VU 1813VT 30S 3452-7096 R 1S TK26 82VU 1SH2-AA W.S. NSA936604CA0931 M2N
23 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
24 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
25
CONF 020
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 020
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 020
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 020
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 020
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 020
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 020
BEFORE
AA 33
1B 0482 N
M
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA 34
1B 0482 N
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
59
1B 0501 N
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T22-A-002-01
CONF 020
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 020
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 020
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 020
BEFORE
AB 35
4G 0489 E
- F.R. 1813VT
127
81VU
1SH1 ATC-1
127 81VU
AFTER
AB 36
4G 0489 E
- F.R.
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T27-A-002-01
CONF 020
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 020
BEFORE
AB 60
4G 0508 E
- F.R. 1822VT
128
82VU
1SH2 ATC-2
128 82VU
AFTER
AB 61
4G 0508 E
- F.R.
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
CONF 020
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 020
BEFORE
AE 88
4E 2843 R
S
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 020
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 020
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 020
BEFORE
AA 94
1J 1782 A
- F.R. 1851VT
127
85VU
1WV1 SDAC-1
127 85VU
AFTER
AA 95
1J 1782 A
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
CONF 020
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 020
BEFORE
AA 95
1J 1782 A
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AFTER
AA 94
1J 1782 A
- F.R. 1851VT
127
85VU
1WV1 SDAC-1
127 85VU
CONF 020
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 020
BEFORE
AA 1
1J 1812 A
- F.R. 1860VT
128
86VU
1WV2 SDAC-2
128 86VU
AFTER
AA 2
1J 1812 A
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 020
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 020
BEFORE
AA 2
1J 1812 A
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AA 1
1J 1812 A
- F.R. 1860VT
128
86VU
1WV2 SDAC-2
128 86VU
CONF 021
(1) Task A320-A-34-XX-1712-01022-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10002 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10002 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the parity of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WI and Ref. Fig. HI
- Ref. Fig. WJ and Ref. Fig. HJ.
(g) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(h) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(i) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(j) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 021
BEFORE
AA
1M F.R.
31
R A
-
7093
F.R.
B H
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 XPDR 86VU
ATC-1
127 81VU
EXISTING WIRE OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-01H47-A-001-01
CONF 021
AFTER
AA F.R.
10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
83VU
1M F.R.
31
2A R A
-
7093
F.R.
2B B H
-
- F.R. 1853VT
127
85VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
1SH1 ATC-1 86VU
127 81VU
NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-01H48-A-001-01
CONF 021
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 81VU 1SH1-AA 2B E0170FA2200 3452-7093 B 1M TK26 85VU 1853VT 31H EN3155-016M2222 M1N+M2N
6 81VU 1SH1-AA 2A E0170FA2200 3452-7093 R 1M TK26 85VU 1853VT 31A EN3155-016M2222 M1N+M2N
19
20
21
22
23
24
25
CONF 021
BEFORE
AA
F.R. 1M
31
F R
-
7147
F.R.
P B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
54 F.R. 2M
-
A R
F.R. 7083
H B
-
F.R. -
1862VT
128
86VU 1SH2 XPDR
ATC.2
128 82VU
EXISTING WIRE OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-01H4D-A-001-01
CONF 021
AFTER
F.R. 1M AA
31
F R 2A
-
7147
F.R.
P B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
F.R. -
1840VT
128
84VU
54 F.R. 2M AB
-
A R 4C
F.R. 7083
H B 4D
-
F.R. -
1862VT
128
86VU 1SH2 XPDR
ATC.2
128 82VU
NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-01H4E-A-002-01
CONF 021
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17 86VU 1862VT 54H EN3155-016M2222 3452-7083 B 2M TK26 82VU 1SH2-AB 4D E0170FA2200 M1N+M2N
18 86VU 1862VT 54A EN3155-016M2222 3452-7083 R 2M TK26 82VU 1SH2-AB 4C E0170FA2200 M1N+M2N
19
20
21
22
23
24
25
CONF 021
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 021
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 021
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 021
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 021
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 021
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 021
BEFORE
AA 33
1B 0482 N
M
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA 34
1B 0482 N
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
59
1B 0501 N
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T22-A-002-01
CONF 021
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 021
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 021
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 021
BEFORE
AB 35
4G 0489 E
- F.R. 1813VT
127
81VU
1SH1 ATC-1
127 81VU
AFTER
AB 36
4G 0489 E
- F.R.
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T27-A-002-01
CONF 021
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 021
BEFORE
AB 60
4G 0508 E
- F.R. 1822VT
128
82VU
1SH2 ATC-2
128 82VU
AFTER
AB 61
4G 0508 E
- F.R.
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
CONF 021
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 021
BEFORE
AE 88
4E 2843 R
S
5C 2839 E
F
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
5C 2821 E
F
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
5C 2839 E
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
5C 2821 E
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 021
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 022
(1) Task A320-A-34-XX-1712-01023-920A-A (A320-A-34-XX-1712-01ZZZ-920Z-A)
Modify the Equipment and the Wiring in the Aft Electronics Rack 80VU
Job Set-Up Information
Working Area
Man-hours 7.00 h
Minimum Number of person 1
Elapsed Time 7.00 h
Skills Electrical
Material necessary to do the job
Part kit 341712A01R00
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E0170FA2200 6 CONTACT
EN3155-016M2222 14 CONTACT
NSA936604CA0931 8 CAP
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7517800-12402 2 XPDR (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Modification of removed equipment can be done in accordance with Ref. ACSS
(1WYD3) VSB 7517800-23-6026 and Ref. ACSS (1WYD3) VSB 7517800-34-6044.
Referenced Information
Manuals/Drawings References/Sheets
06-20-00, Page Block 001
06-41-53, Page Block 001
Task 31-55-34-000-001
AMM
Task 31-55-34-400-001
Task 34-52-33-000-001
Task 34-52-33-400-001
20-33-00
20-52-10
ESPM
20-52-21
20-54-50
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
2 For the identification of access panels, refer to Ref. AMM 06-41-53, Page
Block 001.
3 Do a check of the electrical connectors before you connect them, refer to
Ref. ESPM 20-52-10.
4 For the protection of the connectors, contacts and terminals, refer to Ref.
ESPM 20-54-50.
5 For the general installation of electrical wire harnesses, refer to Ref. ESPM
20-33-00.
(b) Remove and retain the SDACs (FIN 1WV1 and FIN 1WV2), refer to Ref. AMM Task
31-55-34-000-001.
(c) Remove, refer to Ref. AMM Task 34-52-33-000-001
FIN 1SH1
1 TRANSPONDER-ATC 7517800-10101 Discard
FIN 1SH2
1 TRANSPONDER-ATC 7517800-10101 Discard
(d) Modify the wiring.
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WA and Ref. Fig. HA
- Ref. Fig. WB and Ref. Fig. HB
- Ref. Fig. WC and Ref. Fig. HC
- Ref. Fig. WD and Ref. Fig. HD.
Use as necessary
14 CONTACT EN3155-016M2222
6 CONTACT-SOCKET E0170FA2200
8 CAP NSA936604CA0931
NOTE: Tubing heat must be cut at 30mm (1.18 in) to obtain PN E0718-02-
30.
(e) Modify the pin programming of the ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WE and Ref. Fig. HE
- Ref. Fig. WF and Ref. Fig. HF
- Ref. Fig. WG and Ref. Fig. HG.
(f) Modify the parity of ATCs (FIN 1SH1 and FIN 1SH2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WI and Ref. Fig. HI
- Ref. Fig. WJ and Ref. Fig. HJ.
(g) Modify the pin programming of the SDACs (FIN 1WV1 and FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 Modify the connections of the wire(s) as shown on this (these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WH and Ref. Fig. HH.
(h) Modify the parity of the SDAC-1 (FIN 1WV1).
Refer to Ref. ESPM 20-33-00
1 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HK:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WK and Ref. Fig. HK.
2 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HL:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WL and Ref. Fig. HL.
(i) Modify the parity of SDAC-2 (FIN 1WV2).
Refer to Ref. ESPM 20-33-00
1 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HM:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WM and Ref. Fig. HM.
2 If during accomplishment of Ref. Task A320-A-34-XX-1712-02ZZZ-540Z-A
you recorded that the existing aircraft wiring corresponded to line 1 of Ref.
Fig. HN:
a Modify the connection of the wire(s) as shown on this(these) wiring
diagram(s) and the related hook-up chart(s):
- Ref. Fig. WN and Ref. Fig. HN.
(j) Do a continuity test of the new and/or modified electrical wires, refer to Ref.
ESPM 20-52-21.
(k) Install, refer to Ref. AMM Task 34-52-33-400-001:
FIN 1SH1
1 TRANSPONDER-ATC 7517800-12402
FIN 1SH2
1 TRANSPONDER-ATC 7517800-12402
(l) Install the SDACs (FIN 1WV1 and FIN 1WV2) retained at removal, refer to Ref.
AMM Task 31-55-34-400-001.
CONF 022
BEFORE
AA F.R.
1M
39
2C R T
-
7093
F.R.
2D B U
-
1853VT
127
85VU
F.R.
10
2A R X
-
7095
8 F.R.
2B B X
-
- F.R.
1831VT
127
83VU
AB 2M F.R.
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 XPDR
ATC-1
127 81VU
OLD HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S
ICN-A320-A-34XX1712-A-FAPE3-00T1T-A-002-01
CONF 022
AFTER
F.R.
AA 10
2C R X
-
7095
8 F.R.
2D B X
-
1831VT
127
F.R. 83VU
1M
39
2A R T
-
7093
F.R.
2B B U
-
- F.R.
1853VT
127
85VU
F.R.
AB 2M
54
4C R G
-
7146
F.R.
4D B P
-
- F.R.
1862VT
128
86VU
1SH1 ATC-1
127 81VU
CONF 022
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
19
20
21
22
23
24
25
CONF 022
BEFORE
AA
F.R. 1M
39
S R
-
7147
F.R.
N B
-
1853VT
127
85VU
12 F.R.
-
X R 2A
F.R. 10 7090
X B 2B
-
1840VT
128
84VU
54 F.R. 2M
-
A R 2C
F.R. 7083
H B 2D
-
1862VT
128
86VU 1SH2 XPDR
ATC.2
128 82VU
CONF 022
AFTER
F.R. 1M
39 AA
S R 2A
-
7147
F.R.
N B 2B
-
1853VT
127
85VU
12 F.R.
-
X R 2C
F.R. 10 7090
X B 2D
-
1840VT
128
84VU
54 F.R. AB
2M
-
A R 4C
F.R. 7083
H B 4D
-
1862VT
128 1SH2 XPDR
86VU ATC.2
128 82VU
NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE TK26 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S
ICN-A320-A-34XX1712-A-FAPE3-00T1Y-A-002-01
CONF 022
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
19
20
21
22
23
24
25
CONF 022
BEFORE
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
AFTER
2M F.R. 40
AE
-
15C R D
F.R.
7354
TK26 -
15D B L
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R L
7352 -
TK26
7J B D
- F.R. -
F.R.
AD 4
3D 2928 K
-
1
1813VT
127
81VU
2M
6
4D 2926 K
- F.R. - F.R.
1
1822VT
1WV1 SDAC-1 128
127 85VU 82VU
1 IF INSTALLED
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T1Z-A-002-01
CONF 022
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
15 86VU 1862VT 40L EN3155-016M2222 3154-7354 B 2M TK26 85VU 1WV1-AE 15D M1N
16 86VU 1862VT 40D EN3155-016M2222 3154-7354 R 2M TK26 85VU 1WV1-AE 15C M1N
17
18
19
20
21
22
23
24
25
CONF 022
BEFORE
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
AD 4
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 82VU
AFTER
2M F.R. 40
AE
-
15C R C
F.R.
7353
TK26 -
15D B K
- F.R.
1862VT
128
86VU
AB F.R.
97
7H R K
7351 -
TK26
7J B C
- F.R. -
F.R.
4
AD
3D 2927 J
-
1
1813VT
127
81VU
2M
6
4D 2925 J
- F.R. - F.R.
1
1822VT
1WV2 SDAC-2 128
128 86VU 1 IF INSTALLED 82VU
OLD HOOK-UP NEW HOOK-UP STOWED WIRE F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3154
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T20-A-002-01
CONF 022
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
5 86VU 1WV2-AE 15D 3154-7353 B 2M TK26 86VU 1862VT 40K EN3155-016M2222 M2N
6 86VU 1WV2-AE 15C 3154-7353 R 2M TK26 86VU 1862VT 40C EN3155-016M2222 M2N
8 86VU 1WV2-AD 4D 3154-2925 2M CF24 82VU 1822VT W.S. NSA936604CA0931 M2N (1)
10 86VU 1WV2-AD 3D 3154-2927 1M CF24 81VU 1813VT W.S. NSA936604CA0931 M2N (1)
17
18
19
20
21
22
23
24
25
CONF 022
BEFORE
60
AB
L
5J 0510 K
4E 0511 M
- F.R. N
58
AA
T
1G 0503 U
2K 0504 X
- F.R. V
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AB 57
5J 0510 K
4E 0511 M
- F.R.
AA
1G 0503 U
2K 0504 X
- F.R. - F.R.
1822VT
1SH2 ATC-2 128
128 82VU 82VU
CONF 022
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 022
BEFORE
AA 33
1B 0482 N
M
1H 0487 P
G
- F.R. Y
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA 2M
58
1B 0501 N
M
1H 0506 P
G
- F.R. Y
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA 34
1B 0482 N
-
36 F.R.
1H 0487 P
-
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
AA 2M
59
1B 0501 N
-
61 F.R.
1H 0506 P
-
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T22-A-002-01
CONF 022
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 022
AA BEFORE 33
- F.R. E
1E 0479 F
1G 0484 U
T
2K 0485 X
V
AB 35
5G 0490 H
J
5J 0491 K
L
4E 0492 M
- F.R. N
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 58
1E 0498 F
E
AB 60
5G 0509 H
- F.R. J
1822VT
1SH2 ATC-2 128
128 82VU 82VU
AFTER
AA
- F.R. 32
1E 0479 F
1G 0484 U
2K 0485 X
-
AB 36
5G 0490 H
-
F.R.
32
5J 0491 K
4E 0492 M
- F.R. -
1813VT
1SH1 ATC-1 127
127 81VU 81VU
AA
2M
- F.R. 57
1E 0498 F
-
AB 61 F.R.
5G 0509 H
- F.R. -
1822VT
1SH2 ATC-2 128
128 82VU 82VU
OLD HOOK-UP NEW HOOK-UP F.R. FOR REFERENCE NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T24-A-002-01
CONF 022
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
17
18
19
20
21
22
23
24
25
CONF 022
BEFORE
AB 35
4G 0489 E
- F.R. 1813VT
127
81VU
1SH1 ATC-1
127 81VU
AFTER
AB 36
4G 0489 E
- F.R.
- F.R.
1813VT
127
1SH1 ATC-1 81VU
127 81VU
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 3452
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE CF24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1M
ICN-A320-A-34XX1712-A-FAPE3-00T27-A-002-01
CONF 022
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 022
BEFORE
AB 60
4G 0508 E
- F.R. 1822VT
128
82VU
1SH2 ATC-2
128 82VU
AFTER
AB 61
4G 0508 E
- F.R.
- F.R.
1822VT
128
1SH2 ATC-2 82VU
128 82VU
CONF 022
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 022
BEFORE
AE 88
4E 2843 R
S
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
14
4E 2825 R
S
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AE 87
4E 2843 R
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AE 2S
15
4E 2825 R
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 022
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 022
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 022
BEFORE
AA 94
1J 1782 A
- F.R. 1851VT
127
85VU
1WV1 SDAC-1
127 85VU
AFTER
AA 95
1J 1782 A
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
CONF 022
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 022
BEFORE
AA 95
1J 1782 A
- F.R.
- F.R.
1851VT
127
1WV1 SDAC-1 85VU
127 85VU
AFTER
AA 94
1J 1782 A
- F.R. 1851VT
127
85VU
1WV1 SDAC-1
127 85VU
CONF 022
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 022
BEFORE
AA 1
1J 1812 A
- F.R. 1860VT
128
86VU
1WV2 SDAC-2
128 86VU
AFTER
AA 2
1J 1812 A
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
CONF 022
L
END1 LEAD END2
i
n Instructions
Zone or Wire Length Zone or
e
Panel Elec.Ident. Term Terminal P/N Ident. Co Rte Gauge mm Inch Panel Elec.Ident. Term Terminal P/N
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
CONF 022
BEFORE
AA 2
1J 1812 A
- F.R.
- F.R.
1860VT
128
1WV2 SDAC-2 86VU
128 86VU
AFTER
AA 1
1J 1812 A
- F.R. 1860VT
128
86VU
1WV2 SDAC-2
128 86VU
CONF ALL
D. PREPARATION FOR TEST
None
E. TEST
CONF 001-004 006 011-016 018 019 021
(1) Task A320-A-34-XX-1712-01001-390A-A (A320-A-34-XX-1712-01ZZZ-390Z-A)
Test
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Referenced Information
Manuals/Drawings References/Sheets
Task 24-41-00-861-002
Task 24-41-00-862-002
24-50-00
AMM Task 31-36-00-740-008
Task 31-50-00-740-002
Task 31-55-34-400-001
Task 34-52-00-740-004
Procedure
(a) Do the Built-In Test Equipment (BITE) Test of the ATC, refer to Ref. AMM Task 34-
52-00-740-004.
(b) Do the link check between ATC and SDAC.
1 Job Set-up
a Energize the aircraft electrical circuits, refer to Ref. AMM Task 24-41-
00-861-002.
b Do the procedure to get access to the parameter call-up menus, refer
to Ref. AMM Task 31-36-00-740-008.
c Make sure that this (these) circuit breaker(s) is (are) closed:
NOTE: For the circuit breaker location, refer to Ref. AMM 24-50-00.
2 Procedure
a On the center pedestal, on the ATC/Traffic and Collision Avoidance
System (TCAS) control unit (Electrical Panel 11VU), set the XPNDR 1/2
selector switch to 1.
b On the ATC/TCAS control unit, select the ATC MODE selector switch to
ON or to XPNDR if gables ATC/CP PN G6990-40 is installed.
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Referenced Information
Manuals/Drawings References/Sheets
Task 24-41-00-861-002
Task 24-41-00-862-002
24-50-00
AMM Task 31-36-00-740-008
Task 31-50-00-740-002
Task 31-55-34-400-001
Task 34-52-00-740-004
Procedure
(a) Do the Built-In Test Equipment (BITE) Test of the ATC, refer to Ref. AMM Task 34-
52-00-740-004.
(b) Do the link check between ATC and SDAC.
1 Job Set-up
a Energize the aircraft electrical circuits, refer to Ref. AMM Task 24-41-
00-861-002.
b Do the procedure to get access to the parameter call-up menus, refer
to Ref. AMM Task 31-36-00-740-008.
c Make sure that this (these) circuit breaker(s) is (are) closed:
NOTE: For the circuit breaker location, refer to Ref. AMM 24-50-00.
2 Procedure
a On the center pedestal, on the ATC/Traffic and Collision Avoidance
System (TCAS) control unit (Electrical Panel 11VU), set the XPNDR 1/2
selector switch to 1.
b On the ATC/TCAS control unit, select the ATC MODE selector switch to
ON or to XPNDR if gables ATC/CP PN G6990-40 is installed.
c On the MCDU, on the AIDS PARAM LABEL CALL-UP page, enter the
following parameter label call-up with the alphanumeric keys:
029/1/351/01/11
d On the Multipurpose Control & Display Unit (MCDU), make sure that
the bit 11 is set to 0.
e On the ATC/TCAS control unit, select the ATC MODE selector switch to
STBY.
f On the MCDU, make sure that the bit 11 is set to 1.
g On the ATC/TCAS control unit, select the ATC MODE selector switch to
ON or to XPNDR if gables ATC/CP PN G6990-40 is installed.
h On the MCDU, on the AIDS PARAM LABEL CALL-UP page, enter the
following parameter label call-up with the alphanumeric keys:
029/2/351/01/11
i Repeat steps d to g for the bit 11.
j On the center pedestal, on the ATC/TCAS control unit (Electrical Panel
11VU), set the XPNDR 1/2 selector switch to 2.
k On the MCDU, on the AIDS PARAM LABEL CALL-UP page, enter the
following parameter label call-up with the alphanumeric keys:
029/1/351/10/11
l On the MCDU, make sure that the bit 11 is set to 0.
m On the ATC/TCAS control unit, select the ATC MODE selector switch to
STBY.
n On the MCDU, make sure that the bit 11 is set to 1.
o On the ATC/TCAS control unit, select the ATC MODE selector switch to
ON or to XPNDR if gables ATC/CP PN G6990-40 is installed.
p On the MCDU, on the AIDS PARAM LABEL CALL-UP page, enter the
following parameter label call-up with the alphanumeric keys:
029/2/351/10/11
q Repeat steps l to n for the bit 11.
3 Close-up
a De-energize the aircraft electrical circuits, refer to Ref. AMM Task 24-
41-00-862-002.
(c) Do the test after the installation of the SDAC, refer to Ref. AMM Task 31-55-34-
400-001.
(d) Read and decode the hardware pin programming of the SDAC and FWC, refer to
AMM Task 31-50-00-740-002, print the results for SDAC.
- Check that the SDAC1 and SDAC2 parity status is OK.
- Starting from the left side, check that the 2nd digit of the 3rd line is set
to 0, corresponding to the activation of the 'ATC BUS INSTALLED' (See
'Example of SDAC Hardware Pin Programming', refer to Ref. AMM Task 31-
50-00-740-002).
CONF ALL
F. CLOSE-UP
(1) Task A320-A-34-XX-1712-01001-740A-A (A320-A-34-XX-1712-01ZZZ-740Z-A)
Close-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Referenced Information
Manuals/Drawings References/Sheets
Task 25-54-11-400-001
AMM Task 31-55-34-400-001
Task 34-52-33-400-001
Procedure
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the close-up procedure as specified in the installation of the ATC/Mode S
transponders (FIN 1SH1 and FIN 1SH2), refer to Ref. AMM Task 34-52-33-400-
001.
(c) Do the close-up procedure as specified in the installation of the SDACs (FIN
1WV1 and FIN 1WV2), refer to Ref. AMM Task 31-55-34-400-001.
(d) Install the partition Panel 131CW, Panel 131DW and Panel 132EW in the FWD
cargo compartment at Frame 24A, refer to Ref. AMM Task 25-54-11-400-001.
(e) Put the aircraft back to its initial configuration.
G. ADMINISTRATIVE
(1) Task A320-A-34-XX-1712-01001-90AA-A (A320-A-34-XX-1712-01ZZZ-90AZ-A)
Administrative
Procedure
Confirm in the applicable aircraft records that you have completed all the work defined
in this Service Bulletin task set as required.
XPDR
A/C TYPE PN XPDR PRE-MOD WIRING FOR ENHANCED SURVEILLANCE (EHS)
MONITORING WIRE 3452-7096
CONF AND 3452-7097
MOD 7517800-10100 7517800-10100 ON ON INSTALLED
A320/321 A318/319 7517800-10005 7517800-10002 7517800-10010 7517800-10101
151300 BY MOD 150306 BY MOD 156423 1853VT31 1853VT39
001 X X X X
002 X X X X
003 X X X X
004 X X X X
005 X X X X X
006 X X X X
007 X X X X X
008 X X X X X
009 X X X X X
010 X X X X X X
011 X X X X
012 X X X X
013 X X X X
014 X X X
015 X X X
016 X X X X
017 X X X X X
018 X X X X
019 X X X X
020 X X X X X
021 X X X
022 X X X X X
NOTE:
"X" IS USED FOR THE MODIFICATIONS EMBODIED BEFORE ACCOMPLISHMENT OF THIS SERVICE BULLETIN.
ICN-A320-A-34XX1712-A-FAPE3-01D6O-A-006-01
MOD CONFIG 001 CONFIG 002 CONFIG 003 CONFIG 004 CONFIG 005 CONFIG 006 CONFIG 007 CONFIG 008 CONFIG 009 CONFIG 010 CONFIG 011 CONFIG 012 CONFIG 013
31818P7424 X X
150306P11588 X X X X X X X X
151451P14144 X X X X X X X X X X X X X
151451P14153 X X X X X X X X X X X X X
151451P14239 X X X X X X X X X X X X X
151451P18349 X X X X X
155999P13843 X X X X X X X X X X X X
156506P14582 X X X X X X X X X X X X X
156507P14583 X X X X X X X X X X X X X
157433P18275 X X X X X X X
157433P18277 X X X X X X
157969P15320 X
157970P15322 X X X X X X X X X X X X X
162446P20625 X X X X X X X X X X X X X
164432P11632 X X X X X X X X X X X X X
MOD CONFIG 014 CONFIG 015 CONFIG 016 CONFIG 017 CONFIG 018 CONFIG 019 CONFIG 020 CONFIG 021 CONFIG 022
31818P7424 X X
150306P11588 X X X X X X X X
151451P14144 X X X X X X X X X
151451P14153 X X X X X X X X X
151451P14239 X X X X X X X X X
151451P18349 X X X
155999P13843 X X X X X X X X X
156506P14582 X X X X X X X X X
156507P14583 X X X X X X X X X
157433P18275 X X X X X X
157433P18277 X X X
157969P15320
157970P15322 X X X X X X X X X
162446P20625 X X X X X X X X X
164432P11632 X X X X X X X X X
NOTE:
"X" IS USED FOR THE RETROFITTED MODIFICATIONS AFTER ACCOMPLISHMENT OF THIS SERVICE BULLETIN.
ICN-A320-A-34XX1712-A-FAPE3-01JYB-A-004-01
NOTE: ISI 00.00.00179 covers all the frequently asked questions about SB Reporting.
It is revised on a regular basis.
If you have difficulties in the accomplishment of this SB please quote below the area(s) and
give a short description of the issue.
Comments :
Operator : Date :
Name/Title
Please return this form to :
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
Or via your Resident Customer Support Office.