1

Back to Main Page

Julie - Universal Car Emulator Programs:

Seat occupancy sensor programs
BMW.................................................................................................................................4
FIAT...................................................................................................................................7
FORD.................................................................................................................................9
MAZDA...........................................................................................................................11
MERCEDES....................................................................................................................13
MINI ...............................................................................................................................22
OPEL...............................................................................................................................24

Wiring colour codes

The LED behavior

- no jumpers – diagnostic mode - it flashes every second

- adjusting to the ECU – flashing 0,1 sec

- after adjusting it lights constantly and blinks every other second

 2

Back to Main Page

Seat occupancy sensor programs

ATTENTION!!!

This emulator can only be used for testing purposes or to verify accurate functioning of the AirBag
system.
This emulator cannot remain in your car as a replacement for new seat occupancy mat

The emulator needs to be connected to the plug under the passenger seat instead of original seat
occupancy sensor.

There are 3 cables

Before connecting the emulator, use multimeter to check signals on pins in the plug!
 3

Back to Main Page

BMW

No. Model Year Solder jumpers

BMW Series 1 – E81
BMW Series 3 – E90, E92, E93
1 BMW Series 5 – E60, E63, E64 2007-2010 1+7
BMW Series 7 – E65
BMW Series X – E70, E71

BMW Series 1 – E87

BMW Series 3 – E90
2003-2007
BMW Series 5 – E60, E63
BMW Series 7 - E65
2 BMW Series 3 – E36, E46 4+7
BMW Series 5 – E39
BMW Series 7 – E38 1997-2003
BMW Series 8 – E31
BMW Series X – E53

BMW Series 1 – E87

BMW Series 3 – E90
2003-2007
BMW Series 5 – E60, E63
BMW Series 7 - E65
Child seat installed
3 BMW Series 3 – E36, E46 1+4+7
BMW Series 5 – E39
BMW Series 7 – E38 1997-2003
BMW Series 8 – E31
BMW Series X – E53
 4

Back to Main Page

No.1 BMW

USE

European models

(2007 – 2010)

BMW Series 1 – E81

BMW Series 3 – E90, E92, E93
BMW Series 5 – E60, E63, E64
BMW Series 7 – E65
BMW Series X – E70, E71

In Universal Julie Emulator

solder jumpers
1+7

Attention!

If still after installation of the emulator your car signalizes unfastened passanger seatbelt
fault, put a resitor in place of the seatbelt sensor.

For E90, use 680-Ohm resistor

For E60, use 510-Ohm resistor
 5

Back to Main Page

No.2 BMW
USE

(2003 – 2007)
BMW Series 1 – E87
BMW Series 3 – E90
BMW Series 5 – E60, E63
BMW Series 7 - E65

(1997 – 2003)
BMW Series 3 – E36, E46
BMW Series 5 – E39
BMW Series 7 – E38
BMW Series 8 – E31
BMW Series X – E53

In Universal Julie Emulator

solder jumpers
4+7

Insert a 510-ohm resistor into the seat belt socket

 6

Back to Main Page

No.3 BMW
USE

(2003 – 2007)
BMW Series 1 – E87
BMW Series 3 – E90
BMW Series 5 – E60, E63
BMW Series 7 - E65

(1997 – 2003)
BMW Series 3 – E36, E46
BMW Series 5 – E39
BMW Series 7 – E38
BMW Series 8 – E31
BMW Series X – E53

In Universal Julie Emulator

solder jumpers
1+4+7

Insert a 510-ohm resistor into the seat belt socket

 7

Back to Main Page

FIAT

No. Model Solder jumpers

1 Fiat Stilo 2+ 3+4+7

Child seat installed:

2 Fiat Stilo
1+2+3+4+7
 8

Back to Main Page

No.1 FIAT STILO

USE

Fiat Stilo

In Universal Julie Emulator

solder jumpers
2+3+4+7
 9

Back to Main Page

No.2 FIAT STILO

USE

Fiat Stilo

In Universal Julie Emulator

solder jumpers
1+2+3+4+7
 10

Back to Main Page

FORD

No
Model Year Solder jumpers
.
1 Ford Mondeo 2001-2003 1+3+5+7
 11

Back to Main Page

No.1 FORD
USE

(2001-2003)
Ford Mondeo

In Universal Julie Emulator

solder jumpers
1+3+5+7

Connection diagram example

 12

Back to Main Page

MAZDA

No. Model Solder jumpers

1 Mazda Premacy, MX-5, 626, 323, 6 GG/GY 3+4+7

Child seat installed:

2 Mazda Premacy, MX-5, 626, 323, 6 GG/GY
1+3+4+7
 13

Back to Main Page

No.1 MAZDA
USE

Mazda Premacy
Mazda MX-5
Mazda 626
Mazda 323
Mazda 6 GG/GY

In Universal Julie Emulator

solder jumpers
3+4+7
 14

Back to Main Page

No.2 MAZDA
USE

Mazda Premacy
Mazda MX-5
Mazda 626
Mazda 323
Mazda 6 I

In Universal Julie Emulator

solder jumpers
1+3+4+7
 15

Back to Main Page

MERCEDES

No. Model Year Solder jumpers

Mercedes E-class W211 (Temic Armada controller) 2004-2007
Mercedes E-class W211 (Bosch controller) 2002-2007
Mercedes C-class W203 2006-2007
1 Mercedes CLS-class W219 2005-2010 1+5+7
Mercedes CLK-class W209 2006-2009
Mercedes S-class W220 2002-2005
Mercedes S-class W221 2006

Mercedes E-class W211 (Temic controller) 2004-2007

2 Mercedes SL-class W230 2004 5+7
Mercedes SLK-class W171 2004-2011

3 Mercedes E-class W211 (Temic Armada controller) 2002-2003 1+4+6+7

Mercedes E-class W211 with:

4 Temic controller no. 002 820 35 26 2002-2003 2+5+7
Bosch controller no. 002 820 29 26; 0 285 001 441

Mercedes E-class W211 (Temic controller) 2002-2004

5 2+7
Mercedes S-class W220 2003-2005

Mercedes E-class W210

1999-2003
(with airbag OFF indicator after lifting)
Mercedes Vito II W639 2002-2005
Mercedes ML-class W163 2000-
6 Mercedes A-class W168 2002-2005
2+3+7
Mercedes S-class W220 2002-2003
Mercedes C-class W203 -2005
Mercedes CLK-class W209 2002-
Mercedes Vaneo W414
 16

Back to Main Page

Mercedes A-class W168 1997-2001

Mercedes C-class W202 1999-2001
Mercedes Vito W638 -2003
7 3+7
Mercedes ML-class W163 (TRW controller) 1999
Mercedes E-class W210
-1999
(before lifting – with airbag OFF indicator)

Mercedes E-Class W212 2009-2016

8 2+3+4+6+7
Mercedes E-Class S212/C207/A207 2013-2016

Mercedes E-class W211 (Temic controller) 2002-2004

Child seat
9 installed:
Mercedes S-class W220 2003-2005 1+2+7

Mercedes E-class W210

1999-2003
(with airbag OFF indicator after lifting)
Mercedes Vito II W639 2002-2005
Mercedes ML-class W163 2000-
Mercedes A-class W168 2002-2005 Child seat
10
installed:
Mercedes S-class W220 2002-2003 1+2+3+7
Mercedes C-class W203 -2005
Mercedes CLK-class W209 2002-
Mercedes Vaneo W414

Mercedes A-class W168 1997-2001

Mercedes C-class W202 1999-2001
Mercedes Vito W638 -2003 Child seat
11 Mercedes ML-class W163 (TRW controller) 1999 installed:
1+3+7
Mercedes E-class W210
-1999
(before lifting – with airbag OFF indicator)
 17

Back to Main Page

No.1 Mercedes

USE

Mercedes E-Class W211 with Temic Armada controller (2004-2007)

Mercedes E-Class W211 with Bosch controller (2002-2007)
Mercedes C-Class W203 (2006-2007)
Mercedes CLS-Class W219 (2005-2010)
Mercedes CLK-Class W209 (2006-2009)
Mercedes S-Class W220 (2002-2005)
Mercedes S-Class W221 (2006)

In Universal Julie Emulator

solder jumpers
1+5+7

Insert a 100-ohm resistor into the seat belt socket

 18

Back to Main Page

No.2 Mercedes

USE

Mercedes E-Class W211 with Temic controller (2004-2007)

Mercedes SL-Class W230 (2004)
Mercedes SLK-Class W171 (2004-2011)

In Universal Julie Emulator

solder jumpers
5+7

Insert a 100-ohm resistor into the seat belt socket

 19

Back to Main Page

No.3 Mercedes

USE

Mercedes E-Class W211 with Temic Armada controller (2002-2003)

In Universal Julie Emulator

solder jumpers
1+4+6+7

Insert a 100-ohm resistor into the seat belt socket

 20

Back to Main Page

No.4 Mercedes
USE

Mercedes E-Class W211 (2002-2003)

with the following airbag control units:
–
Temic 002 820 35 26
Bosch 002 820 29 26; 0 285 001 441

In Universal Julie Emulator

solder jumpers
2+5+7

Insert a 100-ohm resistor into the seat belt socket

 21

Back to Main Page

No.5 Mercedes
USE

Mercedes E-Class W211 with Temic controller (2002-2004)

Mercedes S-Class W220 (2003-2005)

In Universal Julie Emulator

solder jumpers
2+7

Insert a 100-ohm resistor into the seat belt socket

 22

Back to Main Page

No.6 Mercedes
USE

Mercedes E-Class W210 after lifting-

-with airbag OFF indicator(1999-2003)
Mercedes Vito II W639 (2002-2005)
Mercedes ML-Class W163 (2000-)
Mercedes A-Class W168 (2002-2005)
Mercedes S-Class W220 (2000-2003)
Mercedes C-Class W203 (-2005)
Mercedes CLK-Class W209 (2002-)
Mercedes Vaneo W414

In Universal Julie Emulator

solder jumpers
2+3+7

Insert a 100-ohm resistor into the seat belt socket

 23

Back to Main Page

Examples of connecting the emulator:

 24

Back to Main Page

No.7 Mercedes
USE

Mercedes A-Class W168 (1997-2001)

Mercedes C-Class W202 (1999-2001)
Mercedes Vito W638 (-2003)
Mercedes ML-Class W163 with TRW controller (1999)
Mercedes E-Class W210 before lifting-
-with airbag OFF indicator (-1999)

In Universal Julie Emulator

solder jumpers
3+7

Insert a 100-ohm resistor into the seat belt socket

After correctly connecting the emulator, the SRS/AIRBAG fault on the dashboard will turn
off without the need to delete the fault code.
 25

Back to Main Page

Examples of connecting the emulator:

 26

Back to Main Page

No.8 Mercedes

USE

Mercedes E-Class W212 (2009-2016)

Mercedes E-Class S212/C207/A207 (2013-2016)

In Universal Julie Emulator

solder jumpers
2+3+4+6+7

Insert a 100-ohm resistor into the seat belt socket

 27

Back to Main Page

No.9 Mercedes
USE

Mercedes E-Class W211 with Temic controller (2002-2004)

Mercedes S-Class W220 (2003-2005)

In Universal Julie Emulator

solder jumpers
1+2+7
Insert a 100-ohm resistor into the seat belt socket
 28

Back to Main Page

No.10 Mercedes
USE

Mercedes E-Class W210 after lifting-

-with airbag OFF indicator(1999-2003)
Mercedes Vito II W639 (2002-2005)
Mercedes ML-Class W163 (2000-)
Mercedes A-Class W168 (2002-2005)
Mercedes S-Class W220 (2000-2003)
Mercedes C-Class W203 (-2005)
Mercedes CLK-Class W209 (2002-)
Mercedes Vaneo W414

In Universal Julie Emulator

solder jumpers
1+2+3+7

Insert a 100-ohm resistor into the seat belt socket

 29

Back to Main Page

No.11 Mercedes
USE

Mercedes A-Class W168 (1997-2001)

Mercedes C-Class W202 (1999-2001)
Mercedes Vito W638 (-2003)
Mercedes ML-Class W163 with TRW controller (1999)
Mercedes E-Class W210 before lifting-
-with airbag OFF indicator (-1999)

In Universal Julie Emulator

solder jumpers
1+3+7

Insert a 100-ohm resistor into the seat belt socket

After correctly connecting the emulator, the SRS/AIRBAG fault on the dashboard will turn
off without the need to delete the fault code.
 30

Back to Main Page

MINI

No
Model Year Solder jumpers
.

1 Mini Cooper 2002-2005 2+4+7

Child seat
2 Mini Cooper 2002-2005 installed:
1+2+4+7
 31

Back to Main Page

No.1 Mini
USE

Mini Cooper (2002-2005)

In Universal Julie Emulator

solder jumpers
2+4+7

Insert a 680-ohm resistor into the seat belt socket

 32

Back to Main Page

No.2 Mini
USE

Mini Cooper (2002-2005)

In Universal Julie Emulator

solder jumpers
1+2+4+7

Insert a 680-ohm resistor into the seat belt socket

 33

Back to Main Page

OPEL

No. Model Solder jumpers

Opel Corsa C
1 1+2+5+7
Opel Vectra C

Opel Astra G
Opel Meriva A
2 Opel Omega B FL, 3+5+7
Opel Signum
Opel Zafira A
 34

Back to Main Page

No.1 Opel
USE

Opel Corsa C
Opel Vectra C

In Universal Julie Emulator

solder jumpers
1+2+5+7
 35

Back to Main Page

No.2 Opel
USE

Opel Astra G
Opel Meriva A
Opel Omega B FL,
Opel Signum
Opel Zafira A

In Universal Julie Emulator

solder jumpers
3+5+7
 36

Back to Main Page

Warning!!!

Due to possible construction changes of cars, check signals with multimeter in the ECU plug.

All rights reserved.

Unauthorized copying, hiring, lending, public performance will be punished!

We state that we are the only authentic authors of this manual. We possess copyright of this
publication. Any trials of unauthorized copying, hiring, quoting prohibited!!! Both service and
advertisement constitute copyright and they are the subject to the protection in accordance with the
Act from 4th Feb. 1994 on Copyright and Related Laws (Statute Book no. 24 position 93) and
protection on the basis of the Act from 8th June 1993 on combating an unfair competition (Statute
Book no. 47 position 211)

www.carlabimmo.com

Last updated 16.08.2018