V Twin

V-TWIN PRODUCT GROUPS
1. Touring FLT, FLHT, FLHR

Pages 1-144
2. Big Twin FXST, FLST, FXD
Pages 145-468
3.
Pages 469-824
4. Sportster XL, XLH, XLS, XLCH

Pages 825-1010
5. Multi-Fit/Chopper
Pages 1011-1258
6. Tools-Maintenance
Pages 1259-1328
For our complete listings: www.vtwinmfg.com
TOURING
Index for Touring

A
V-Twin Mfg., OriginalAftermarket Supplier
AIR CLEANER...................................................83-95
AXLE..................................................................61-62 Over the past 50 years, V-Twin Manufacturing has built the most compre-
B hensive selection of replacement products and custom accessories for Har-
BELT..................................................................35,60 ley-Davidson motorcycles. We have more than 10,000 supporting dealers
BRAKE...............................................................44,45 in over 39 countries servicing the Harley enthusiasts as builders, restorers
C and maintenance technicians. We maintain over 450,000 square feet of in-
CALIPER.......................................................43,49,50
CAM COVER...........................................................30 ventory, production and sales to ensure a high level or order fulfillment.
CLUTCH............................................................34,100
CONTROLLER......................................................104
D
DASH CONSOLE......................................96,105,106
DERBY COVER.............................................27,28-29
DISPLAY STAND....................................................34
DIPSTICK...........................................................97,98
E
ENGINE........................................................26,36-37
EXHAUST..........................................................69-82
ENGINE BAR....................................................67-68
ENGINE MOUNTS................................................101
F
FAIRING.............................................................19,20
FENDER...................................................63,64,65,66
FILTER....83,84,85,86,87,89,90,91,92,93,94,95,96,97
FOOTPEG................................................125,126,129
FORK......................................................55,57,58,107
FOOT BOARD................................................122-129
FORWARD CONTROL............................................43
FUEL CONSOLE DOOR.......................................105
New York Motor Shop and Warehouse
H
HANDLEBAR...............................................130-135
HANDLEBAR GRIP.............................................140
HEADLAMP..................................................107-112
HORN....................................................................121
I
IGNITION POINTS COVER....................................31
G
GAS TANK............................................................106
K
KICKSTAND...........................................................42
L
LUGGAGE RACK..............................................14-15
LOWERING KIT......................................................51
M
MASTER CYLINDER..............................................43
MIRROR.................................................................120
O
OIL......................................................................97-98
P
PASSENGER FOOTBOARD.........................126-127 Missouri Distribution
PRIMARY.................................................26,27,28-29
PUSHROD COVER............................................32,34
PULLEY COVER.....................................................60
R
RISER...................................................................135
ROCKER BOX SET...........................................35-36
S
SADDLEBAG..............................................2-5,6,7-12
SEAT.......................................................................18
SHIFTER........................................................39,40,41
SHOCK...............................................................52-53
SHOW BIKE BOLT KIT...........................................37
SIDE COVER........................................................6,38
SISSY BAR/PAD................................................16-17
SPARK PLUG.........................................................33
SPEEDOMETER........................................96,100,101
SPOTLAMP...................................................113-115
SWITCH................................................................141
T
TAIL LAMP...........................................................118
TAPPET...................................................................33
THROTTLE..............................................................33 New York Sales and Customer Service Center
TOOL KIT................................................103,143,144
TOUR PACK......................................................12-13
TRIPLE TREE.........................................................55
Prop 65
TRANSMISSION.....................................................38
TURN SIGNAL..............................................116-117 The California Office of Environmental Health Hazard Assessment is establishing this website
W to provide the public with information on chemicals, products and locations often associated
WHEEL..............................................................59-60 with Proposition 65 warnings. These warnings inform Californians about their exposures to
WINDSHIELD.....................................................21-24 chemicals that cause cancer, birth defects or other reproductive harm.
https://www.p65warnings.ca.gov/
2 WWW.VTWINMFG.COM
Saddlebag Lids
TOURING
Saddlebag Lids
• Lids are plastic with a smooth finish and
ready for paint.
49-3504
• Lids come individually or as a pair.
• Lids for are injection molded black plastic.
49-3503
49-2725
49-2737
49-2738
49-2734
Right Lid
49-2735
Left Lid
49-2730
Note: For all Saddlebag Pieces and Tour Boxes
made of Fiberglass Reinforced Black Plastic, parts
must be primed with paint then final paint. The
Raw FRP is not considered the finish.
49-2703 Left Lid 49-2702 Right Lid
VT No. OEM Item Finish Fits Note
2014-up
49-2734 90201108 Right Lid Black FLT 2014-up With speaker cutout
49-2735 90201109 Left Lid Black FLT 2014-up With speaker cutout
49-3503 Right & Left Set Black FLT 2014-up With speaker cutout
49-2737 90200411 Right Lid Black FLT 2014-up Without speaker cutout
49-2738 90200413 Left Lid Black FLT 2014-up Without speaker cutout
49-3504 Right & Left Set Black FLT 2014-up Without speaker cutout
1993-2013
49-0499 Left and Right Set Primed FLT, FLHT 1993-13 With speaker cutout
49-2730 90756-93 Left and Right Lid Set Primed FLT, FLHT 1993-13 Without speaker cutout
49-2705 90757-93 Left Lid Primed FLT 1993-13 Without speaker cutout
49-2704 90756-93 Right Lid Primed FLT 1993-13 Without speaker cutout
1985-1992
49-2725 Left and Right Lid Kit Black FLT 1985-92 With gasket and hinges
49-2703 90757-85 Left Lid Black FLT 1985-92 Plastic, hole for lock
49-2702 90756-85 Right Lid Black FLT 1985-92 Plastic, hole for lock
49-2759
15-0580 49-2506
• All pieces are constructed of black fiberglass, ready for primer FLT/FLHT Saddlebag Lid Set
and paint, if desired. • Lids are sold as a set
VT No. Item Finish Note
1979-1984
49-2759 Left and Right Lid Set Black With gaskets
15-0580 Saddlebag Gasket Self Adhesive Backing, pair
49-2506 Hinge Kit includes hook, and rivets for both right and left side
49-0618 Lock Set Lock Hook Assembly
WWW.VTWINMFG.COM 3
Saddlebag
TOURING
49-3506 49-0535
49-0535
49-3507
Black Saddlebag Bottom Set

• Constructed from a black PVC material, ready for primer and
paint!
• Locks and hinges not included. Bags will accept OE or V-Twin
lids and related hardware, available separately.
• All pieces are constructed of black fiberglass and reinforced
FRP plastic, ready for primer and paint. FRP is made up of
Polyphenylene oxide/Polyamide alloy.
VT No. Fits
49-0535 1985-1992
49-3507
3” Stretched Saddlebag Kit.

• Includes bags, lids, face plates, locks and mounting hardware.
• Bags are injection molded and have a smooth inside and
outside surface. Bottoms are 2” deeper in th front, 3” deeper in
the rear and have cutouts on both bags for dual exhaust.
VT No. Fits
49-2679 49-2680
49-3506 1993-2013 FLT
49-3507 2014-up FLT
Saddlebag Tool Tray Set
Note: For all Saddlebag Pieces and Tour Boxes made of Fiberglass • Made of ABS plastic. Trays cover the length and width of the
Reinforced Black Plastic, parts must be primed with paint then final saddlebags.
paint. The Raw FRP is not considered the finish. • Easily lift the tray out with one hand when needed.
VT No. Fits
Saddlebag LED Lamp Kit
• This wrap-around Side Marker Light Kit adds light to the 49-2679 1993-2013
lower edge of the saddlebags. Available with red lens, the 49-2680 2014-up
bright band of LED lamps is housed in a chrome frame that
hugs the bottom of the saddlebag. The low-profile self-adhe-
sive lamps can be installed on models equipped with stan-
dard-length saddlebags, and are compatible with optional
saddlebag guard rails. Easy to install kit includes left and right
lamp and quick-disconnect wiring harness.
• Fits 2014-later Touring models with hard saddlebags. Not
compatible with models equipped with Stretched Saddlebags.
VT No. 49-0000
4 WWW.VTWINMFG.COM
Saddlebag
TOURING
49-3505 Watch Our Video!
http://www.youtube.com/
user/TeddCycle
Deep Saddlebags
• Injection molded for smooth inside and outside surfaces.
• Full set includes left and right sides, lids and bottoms.
• Bottoms have indents for muffler body on the under side
with a slight curve down towards the rear.
VT No. Item Fits
49-1135
49-3505 Full Set, Tops & Bottoms FLT 1993-2013
49-2667 Bottom Set FLT 1993-2013
49-0723 Liner Kit For Bags FLT 1993-2013 49-1135
Stretched Saddlebag Bottom Set

• Includes right and left side with black unfinished surface.
• This saddlebag set is a perfect fit with all mounting holes that
match stock locations, may re-use stock hardware for a true
bolt-on experience. All mount holes are pre-drilled in stock
location and pre-fit for the ease of installation.
• The bottoms are 2” deeper in the front than stock and 3”
49-3500 deeper in the rear, which gives these the stretched look.
• Designed for models with dual exhaust.
• Complete hinge, latch, and hardware kit is available sepa-
rately for Road King riders looking to keep stock bags com-
plete or for converting from leather covered bags. Order lids
separately.
49-1135
49-0535
Black Replica Saddlebags

• Plastic with a natural finish, ready for primer paint.
• Saddlebags are manufactured of FRP, fiberglass reinforced
plastic.
VT No. Item Fits
49-3500 Full Set, Tops & Bottoms FLT 1993-2013 VT No. Item Fits
49-2712 Right Bottom FLT 1993-2013 49-1135 Black Stretched Bottoms FLT 2014-up
49-2713 Left Bottom FLT 1993-2013 Liner Kit; Includes liners for
49-0749 FLT 2014-up
49-0535 Right & Left Bottom Set FLT 1985-1992 bags and lids
49-2714 Right Bottom FLT 1985-1992 Note: For all Saddlebag Pieces and Tour Boxes made of Fiberglass
49-2715 Left Bottom FLT 1985-1992 Reinforced Black Plastic, parts must be primed with paint then final
paint. The Raw FRP is not considered the finish.
WWW.VTWINMFG.COM 5
Side Cover
TOURING
49-2719
49-2720
49-2719
Installed
49-2721
37-0900 37-0903
49-2719
Installed Bertha Leather Saddlebag
Wyatt Gatling Contour Side Cover Set • Features full leather construction with fringe and ¹⁄₂” chrome
• Made of formed FRP plastic. spot.
• Features a clean contoured look that flows back to the sad- • FLT models feature fiberglass backing and a battery cutout.
dlebags and have more surface area than stock side covers for • The 1993-up models have a cut out for shock clearance.
continuation of your paint scheme. VT No. Fits
• These side covers will compliment our stretched saddlebags or 48-3178 1985-92
stock saddlebags. Fit all FLT, FLHT, FLHR and FLHX models.
48-3183 1993-14
VT No. Fits
49-2719 1997-2008
49-2720 2009-2013
49-2721 2014-up
49-1783 Mounting Pins
37-0900 Mounting Grommet, 1997-07, 10 pk
Note: For all Saddlebag Pieces and Tour Boxes made of Fiberglass Reinforced
Black Plastic parts must be primed with paint then final paint. The Raw FRP is
not considered the finish.
6 WWW.VTWINMFG.COM
Saddlebag Hardware
TOURING
Fits 1995-13 FLT
49-0095
49-0874
49-1279
49-0856
Saddlebag Lock Kit
• Fits 2014-up.
49-0900 Fits 1993-2013 FLT • Includes 4 screws and 4 lock
tabs.
VT No. 49-1421
Saddlebag Universal
hardware kit with
left and right Saddlebag Kit
latch assembly
set, includes bail • Features random key
head studs. code for use with vinyl or
leather soft side saddle-
bags.
VT No. 49-1420
49-1271 Fits 1993-2013 FLT
49-1245
49-0081
Saddlebag Hardware Kits
VT No. 1993-2013/Note
49-0874 Includes Bag Mounting Hardware; No Lid Hardware
49-0900 Includes Lid Hardware
49-1271 Includes Chrome Face Plates 49-1200 49-1201
49-0081 Include Release Pins and Latches Saddlebag Lid Latch Assembly
49-0095 Includes Lid Hardware VT No. Item
49-0856 Lid Hardware Only 49-1200 8” Latch Assy, Black Set FLHTR 2014-up
VT No. 2014-up 49-1201 8” Latch, Black, Right Only FLHTR 2014-up
49-1279 Screw Kit 49-1202 8” Latch, Black, Left Only FLHTR 2014-up
49-1245 Hardware Kit with handles
49-0720 Saddlebag Liner Kit for Stock Type Bags
WWW.VTWINMFG.COM 7
Saddlebag Hardware
TOURING
49-0885
Saddlebag Parts
• For 1979-up
VT No. Item 49-1262 49-1264
49-1269
1979-92
49-2506 Hinge Kit
15-0580 Lid Gasket
1993-2013
49-0723 Liner Kit for Stock Type Bags 49-1268
49-0724 Key and Lock Kit 49-1005 49-2506
49-1005 Key and Lock, Black, pair
15-0581 Lid Gasket
49-0081 Hardware Left/Right Latch Kit
49-0095 Hardware/without Latch Set
49-0886 Saddlebag Lid Wear Plate Set
28-0447 Saddlebag Rubber Bumper Set 49-1265 49-1266 49-0724
37-0981 Bracket Nut Set
49-0729 Lock and Key Kit
49-0882 Saddlebag Latch Set
2014-up
49-1265 Liner Kit for Stock Type Bags
49-1262 Mount Isolator Set
49-1263 Strike Set 49-0729 49-1267 28-0956
49-1264 Seal Set
49-1265 Tether Set
49-1266 Handle Kit, Chrome
49-1267 Stud Set
49-1268 Hinge Kit
49-1269 Cover Gasket 28-0447 49-1270
49-1270 Lock Set
49-1200 8” Black Latch Set (FLHTR)
28-0956 Saddlebag Bumper Set
16-1610
15-0580 15-0581
49-0882
16-1610 in use!
49-0886
Saddlebag Latch Rivet Tool

• Gives secure fastening of rivets while providing a clean look.
VT No.
16-1610
37-0566 37-0567 49-1263
Fiberglass Saddlebag Rivets, pack of 50.
VT No. OEM Length
37-0566 90965-63 5/16”
37-0567 90966-67 1/4”
37-0568 90967-64 3/8”
49-0723 49-0720
8 WWW.VTWINMFG.COM
Saddlebag Hardware
TOURING
Saddlebag Filler
Panels
• Fit 2006-2008 FLHX.
VT No. Finish
42-1107 Chrome
42-1108 Raw
42-1107
50-1135 50-1136
51-0480
49-0873
Chrome Saddlebag Support Set

• Left and right set used when saddlebag trim set are not used
49-0468 49-0469 to create a cleaner custom appearance.
VT No. Fits
51-0480 FLT 2009-2013, 90881-09A
49-0873 FLHX, FLTRX, FLT 2009-2013
50-1196 50-1201
48-0490
48-0491 48-0492 48-0493
50-1197 48-0496
Saddlebag Filler Panels
• Panels fill in the gaps between the fender and the rear of the
saddlebags, hiding the saddlebag mounting brackets. 48-0494 48-0495
48-0497
• Available in chrome or gloss black finishes and smooth for
bikes without a saddlebag guard or slotted for bikes with sad- Pewter Emblems with adhesive backing.
dlebag guards. VT No. Size Style
48-0490 4” x 3” Skull with sickle
Chrome Black OEM Year Type 48-0491 3” x 1” 5 Skulls
50-1135 50-1136 45898-98C 1993-08 Smooth 48-0492 2” x 3” Grim Reaper
49-0468 49-0469 91614-10 2009-13 Smooth 48-0493 1.5” x 2.5” Skull
50-1196 50-1201 90200873 2014-up Smooth 48-0494 2.5” x 2.5” Maltese Cross with Skull
50-1197 90200875 2014-up Slotted 48-0495 1.5” x 1” Skull
48-0496 3” x 1” Winged Skull
48-0497 5” x 2” Bat Wing
48-1389 48-1392 48-1390 48-1391
48-0582 48-0583
48-1386 48-1388
48-1387 48-1385
Fender Ornaments. Available in skull or boar style.
48-0813 Antique-
48-0812 Patina Chrome Black Style
Silver
Replica FLH Windshield Bag. 48-1389 48-1392 48-1390 48-1391 Skull
Gold Trim Silver Trim Color
48-1387 48-1386 48-1385 48-1388 Boar
48-0582 48-0812 White
48-0583 48-0813 Black
WWW.VTWINMFG.COM 9
Saddlebag Hardware
TOURING
49-2508
49-1436
49-0798
49-2508 Installed
49-0873 49-1437
49-0791 49-1433
51-0482
51-0480
31-1562
49-0532 Lower Saddlebag Guard Sets
• Left and right saddlebag guards with a chrome finish.
• Eliminate the rear saddlebag guard for a sleek, custom
appearance. The kit replaces the loop saddlebag guard with a
bolt-on chrome plated support leg.
49-1724 Chrome Black Fits
49-1267 FLTR 2004-08, FLHRS 2004-08, FLHRX
49-0798 49-1436
2006-08
49-0873 49-1437 2009-13 FLHX, FLT
51-0480 2009-13 FLHX, FLT
51-0482 49-1439 2014-up FLHR, FLHTC, FLHK
50-1205 Installed 50-1205

Saddlebag Guard Kit
• Includes rail set (right and left) & mount brackets.
• Brackets are 15% thicker than stock for added support to pre- 50-0873 50-1518
vent breakage. Saddlebag Guard Eliminator Brackets
Chrome Black Item Fits
• Go from the frame to the lower support bracket and replace
49-2508 Kit FLHT 1997-2008, FLHR 1997- the saddlebag guards and upper saddlebag rails.
2008
50-1203 50-1205 Kit FLHT 2008-13 Chrome Black Fits
50-1206 Kit FLH 2014-up 50-0873 50-1518 FLT 1997-2008
49-0791 49-1433 Brackets FLT 1979-2013
31-1562 Repair Brackets, FLT 1979-2013
49-0532 Brackets FLT 1979-2013, Heavy Duty
49-1724 Brackets As Above, Forged Alloy
49-1267 Bail Head Fastener Stud Set
50-1113
50-0959
Chrome Saddlebag Trim Rail Kit Chrome Saddlebag Rail Set
• Accents FL saddlebag top covers and offers protection from • Includes four chrome pieces to replace original.
scratching. Fits 1987-up. VT No. Fits
VT No. 50-0959 50-1113 FLT 1993-2008
10 WWW.VTWINMFG.COM
Saddlebag Face Plate
TOURING
42-1117 42-1100 42-1104 42-1126 42-1064
42-1130 42-1111 42-1128 42-1127 42-1098
42-1129 42-1131 42-1163 42-0176 42-1099
42-1097 49-0883 42-0365

42-7103 42-0179
Saddlebag Face Plate Set
• Fit 1993-2013 FLT
Style Chrome Black
Plain Winged 42-1099 42-1117
Flame Winged 42-1100 —
Billet Winged 42-0176 42-0179
Ball Milled Winged 42-1104 42-1126 42-0180
Perforated Winged — 42-1163 49-0867
Speed Line 42-1064 —
Contour 42-1130 —
Perforated 42-1111 —
Carbon Fiber — 42-7103
Smooth with reflector 49-0867 —
Flame 49-1013 —
Louvered 42-1128 —
Deep Cut 42-1129 — 42-1181
Ball Milled 42-1131 —
42-0365
49-1281 Style Chrome Black
49-1282 Finned 42-0180 —
Swiss Cheese 42-1097 42-1127
Flair 42-1098 —
Chrome Face Plate 49-0883 42-1181
Kit; includes flame insert 42-0365 —
42-1162
49-1011 49-1012 33-0221

48-1197
Wyatt Gatling Saddlebag Face Plate Insert Set
• For 1993-2013
2014-up Saddlebag Latch Cover Set VT No. Fits
Chrome Black Style
49-1281 49-1282 Edge Cut 48-1197 Flame
49-1315 49-1316 Stock Type with reflectors 33-0221 Reflector Set Only
42-1162 42-1165 Stock Type without reflectors 49-0773 Set, Flame, 1993-2013
49-1011 49-1012 Smooth with cuts
WWW.VTWINMFG.COM 11
Tour Pack
TOURING
33-1187
49-0782
Installed
33-1188
49-0554 49-0782
Chrome Touring Luggage Pack Latch Kit
• For touring pack and saddlebags.
33-1189 • The kit includes catch and spacer plate plus the screws for
installation.
VT No. Fits
49-0554 1995-05 FLT
Aurora Tour-Pak® Accent Light Kit 2006-13 FLT *Note: Includes screws for easier
49-0782*
• Available with smoke, clear, or red lenses; lighted with mounting.
long-lasting red LED boards.
• Replaces the original chrome insert
• Includes all the necessary installation hardware.
• Fits 2006-up FLHT, FLHTCU
VT No. Item
33-1187 Red Accent light
33-1188 Smoke Accent light 42-1744 42-1745
33-1189 Clear Accent light Chrome Tour Pak Speaker Trim
• Mounts directly over the stock speaker grills.
• Will not work with boom high performance speakers
VT No. OEM Fits
42-1744 74584-99 1998-13 FLHTCU, FLHTK, FLHTCUG
42-1745 61400194 2014-up FLHTCU, FLHTK, FLTRU
49-0002
Tour-Pak Rear Taillamp

• Features a mirror chrome finish 42-0148
Tour Pak
VT No. OEM Item Fits
49-1238 Tether Cable FLT 1991-up
49-1284 Hardware Kit FLHT 1997-2013
49-0002 53000329 Tail Lamp Trim FLHTCU 2014-up
Tour-Pak Lock Cover
• Fits 1988-2013 FLT
VT No. Finish
42-0148 Chrome
42-0149 Black
12 WWW.VTWINMFG.COM
Tour Pack
TOURING
49-2746
37-9136 50-1216
50-0683 49-0890
49-2665
49-0554 49-1285
49-1283
49-1006 15-0583
49-2666
Hardware for Touring Pack
• Sold as latch kits that include both rear latch kits that include
both front and rear latches for single complete installation
• Latch required to be ordered in a quantities of two for com-
plete installation.
VT No. Item Fits

37-9136 Latch, Chrome FLT 1995-06
37-9774 Latch Spacer Set FLT 1985-06
37-0352 Latch, Chrome FLT 1995-06
49-0893 Latch, Black FLT 1995-06
49-0554 Latch Kit, Chrome FLT 1999-13
49-0782* Latch Kit, Chrome FLT 2006-13
49-0890* Latch Kit, Black FLT 2006-13 Touring Pack
50-1216 Hinge Set, Chrome FLT 1988-13 • Fits 2006-13 FLT
50-0683 Hinge Set, Black FLT 1988-13 VT No. Item
FLTR, FLHTC, FLHT, FLHR 49-2746 Top and Bottom Set
49-1006 Lock & Key Kit
FLHX 1992-13 49-2665 Bottom
49-2744 Hardware Kit 2006-13
49-2666 Top
15-0583 Gasket 1997-up
49-1285 Hardware Kit 2006-13 49-2747 Trim Kit, Chrome
49-1283 Tether Cable Kit 1991-up Note: For all Saddlebag Pieces and Tour Boxes made of Fiberglass
*Note: Includes screw for easier mounting Reinforced Black Plastic, parts must be primed with paint then final
paint. The Raw FRP is not considered the finish.
Lamp Lens Sets for Tour Pak
• To be attached to the sides and taillamp of the Tour Pak.
Tour Pak Side Marker Lamp Lens Set fits 1979-05 FLHT,
FLHTC, FLHTCU.
33-1201 Red 33-1201 33-1202 33-1203
33-1202 Smoked
33-1203 Clear
Tour Pak Tail Lamp Lens Set fits 1989-13 FLHTCU, FLHTC.
33-1206 Red
33-1207 Smoked 33-1206 33-1207
33-1208 Clear
WWW.VTWINMFG.COM 13
Luggage Rack
TOURING
50-1523 Installed
Note: Racks are designed for loads of 10 pounds or less!
50-1523 50-1185
Chrome Streamlined Luggage Rack Chrome Luggage Racks for Tour Paks
• Flows with the long and lean lines of your ride. VT No. Style Fits
• The rails and arched fender support with hidden hardware 50-1523 Standard All King and Chopped lids.
gives the appearance of a floating rack design. 50-1185 Stealth FLHR 2008-up King, Chopped, Razor lids
VT No. Fits
50-0679 FLHX 2006-08, FLHT 1999-05, FLHR 1999-08
50-0595
50-0101
50-0596
50-0304
Chrome Luggage Racks.
VT No. Fits Year
Air Deflectors
• Fit the mid frame section of Touring models below the rider
50-0595 Side Car 1967-2011 seating area to direct engine heat away
50-0596 Tour Pack 1979-up • Does not fit 2001-07 with adjustable rider backrest
VT No. Year
50-0101 2001-07
50-0304 2009-up
14 WWW.VTWINMFG.COM
Luggage Rack
TOURING
50-1558
50-2074 50-2075
Retro Luggage Rack
• Fits FLHR with solo seat.
50-1526
VT No. Year 50-1559
50-2074 1998-up
50-2075 1989-97
31-1304 50-1512 31-1315
50-2021
50-1513
Contour Fender Racks

• Feature steel construction for use with solo seats for loads of Detachable Solo Luggage Rack
10 pounds or less. • Order hardware separately.
VT No. Year Model Rack Size VT No. Item
50-2021 1998-up FLHR 11” x 6” 50-1526 Docking Hardware, OEM 53803-06
50-1513 Docking Hardware, OEM 53804-06
50-1558 Rotary Latch Kit, chrome, OEM 12600036
50-1559 Rotary Latch Kit, black, OEM 12600036
49-0951 Bushing Set (2), wide style, rubber between
31-1304
chrome ends, FL 1996-up
50-1512 Stainless Steel Bushing Set (4), FLT 1996-up
49-0304 Bushing Set (2), rubber installed between chrome
31-1315
ends, FL 1996-up
49-0832
49-0304 Installed 49-0832 Installed
50-0032
Old Style Luggage Rack

• Replica of 1940’s accessory, contours all rear fenders 1934-up.
• Great for attaching thro-over saddlebags.
• Does not interfere with post mounted buddy or police seat.
50-0033 50-0034
VT No. Finish
Docking Hardware for FLT.
49-0304 Polished Replica VT No. Item
49-0951 Chrome Replica 50-0032 Shorty Detatchable Sissy Bar, Chrome
49-0832 Black Replica 50-0033 4 Point Docking Hardware Kit, Chrome, 2014-up
37-2096 Chrome Screws, 4 pack, ⁵⁄₁₆”-24 oval head slotted 50-0034 4 Point Docking Hardware Kit, Black, 2014-up
WWW.VTWINMFG.COM 15
Back Pads
TOURING
Flatlander Mini
Seat Pad Back
Rest
• Measures 5¹⁄₂” wide x 3”
tall x 1¹⁄₅” thick.
VT No. Fits
47-0753 All models with a short sissy bar
47-0004 47-0006
47-0005
Pillow Passenger Pad

• 13” tall and fits stock seat rails on 1977-85 FLH-FLT-FLHT.
47-0836 • Available in pillow style Naugahyde to match factory style
47-0839 seats.
• Includes bushings and washers.
VT No. 47-8654
47-0845 47-0846
47-0348 47-0348
Back Pads
VT No. Item OEM
47-0004 Driver Backrest 52914-09A
47-0005 Passenger 52000133
47-0006 Passenger 51770-09
47-0836 Backrest 52924-98B
47-0839 Backrest 51132-98
47-0840 Passenger
47-0349
47-0845 Backrest
47-0846 Black Passenger 52300364 Stick-On Rear Passenger Pillion Pad
47-0849 Comfort Stitch Tour-Pak Pad • In vinyl with suction cups. For custom applications.
VT No. Size
47-0846 47-0348 9” x 6” x 2³⁄₈”
47-0349 9” x 5³⁄₄” x 2³⁄₈”
47-0612 Large Rear Pad
47-0347 9” x 6” x 3”
47-0753
47-0845
Sissy Bar Pads Black Tapered Backrest Pad

VT No. Item • Features a single button.
47-0753 Driver Backrest VT No. Item
47-0846 Passenger 47-0848 Black Tapered Backrest Pad
47-0845 Passenger
16 WWW.VTWINMFG.COM
Sissy Bar
TOURING
50-0031 50-0032
50-1561
50-1574
50-1565 50-1575
Sissy Bar Side Straps and Backs
• For 2014-18 FLT
50-1684 • Accept 11” wide sissy bar top
• Non-detachable type
• Fits 2014-18 FLHR, FLHRSE, FLHX, FLTRX, FLTRXS
Sissy Strap Back Finish
50-1561 50-1574 Black
50-1565 50-1575 Chrome
50-0033 50-0034 50-2007
Detachable Sissy Bar & Docking Hardware
VT No. Fits
50-0031* Standard Height Detachable Sissy Bar
50-0032* Short Detachable Sissy Bar
50-1684 8¹⁄₂” Short Detachable Sissy Bar
50-0033 4 Point Docking Hardware, 2014-up, Chrome
50-0034 4 Point Docking Hardware, 2014-up, Black 50-0811 50-0815 50-0819
50-2007 4 Point Docking Hardware, 2009-13
*Note: Requires separate purchase of Docking Hardware
31-9901 31-9902
50-0322
Backrest Hardware Kit
VT No. Item
31-9901 Driver Backrest Mounting Kit
31-9902 Driver Backrest Mounting Kit
50-1557 50-1556
Sissy Bar Straps and Backs

50-0820 • For 1997-13 FLT
42-0156
• Order top and straps separately.
Sissy Bar Inserts Sissy
• Featuring brass and chrome finishes as noted. Side 16” 11”
Fitment Bar Width
• Inserts mount with screws to cross bar. Strap Back Back
Handrail
VT No. Style
97-08 FLHR 50-1556 50-0811 50-0815 50-0819 8³⁄₄”
50-0820 Chrome Maltese
50-0322* 8³⁄₄”
42-0156 Brass Eagle “Live to Ride”
09-13 FLHR 50-1557 50-0811 50-0815 50-0819 8³⁄₄”
*Note: 9/16” diameter round bar
WWW.VTWINMFG.COM 17
Seat
TOURING
50-0727
26-0872
Passenger Seat Handrail 47-0835 Installed
• Fits passenger seat area and mounts as stock. OEM No.
52400090.
Chrome Black Item
50-0727 50-0728 Handrail
26-0872 Seat Handrail Cover Set
31-0611
47-0885 47-0886
47-0835
31-0943
Chrome Seat Handrails

• Fit behind driver seat area and mount as stock.
VT No. Fits
31-0611 FLT 1999-2005
31-0943 FLT 2009-up Except FLHTCU & TG
31-1547
31-9052
31-9052
Wyatt Gatling Saddle Solo Seat
• Frame mounted solo seat has Naugahyde covering.
VT No. Fits
47-0885 1996-03 FLT
47-0886 1996-03 FLHR
47-0835 2008-up FLT, Wyatt Gatling
42-0708 31-1641 Back Rest with mount for 47-0835 Solo
31-1547 Mount kit includes the springs, brackets & cover.
Solo Seat Mount Kits

• Include “Tee” bracket, 2” springs and strut bars for rigid
mounting.
• VT No. 32-9052 utilizes a center spacer for spring. Kits accept
standard size police solos such as VT No. 47-0226. Bracket.
VT No. 31-0177 required to mount buddy seats on these kits
which is not included Black Frame Cover
VT No. Year Item • Installed between the solo seat and the frame.
31-9052 1997-07 Kit VT No. Fits
42-0708 1997-07 Black Cover 42-0707 FLT 1997-up
18 WWW.VTWINMFG.COM
Fairing
TOURING
50-0622 50-0623
Tie Down Bracket Kit

• For 2014-up Touring models, except Road Glide, Road King
51-0751
and Trike models.
• Simplifies the process of securing your bike to a trailer or lift.
These stylish brackets mount cleanly to the front fork cover to
connect tie down straps.
• Moving the tie down point from the handlebar to the triple tree
area reduces wear on the handlebar bushings and ensures a
consistent easy to access mounting point.
• Includes mounting hardware.
• Fits 2014-up FLHT, FLHTCU, FLHTK, FLHX
Chrome Black OEM#
50-0622 50-0623 93500011 50-0752
Chrome Tie Down Brackets

• Mount to the front fork cover and pro-
vide a secure point to attach tie downs.
• Fit 1995-up FLHR, 1995-13 FLHT, 33-1722
FLHX, 2010-13 FLHTCU, 2002-up
FLST.
VT No. 31-0025
34-0049 34-0052
42-9999 42-9998
Windshield Trim
• Four accent slots, includes stainless steel mounting hard-
ware. 42-0235
VT No. Item Finish
Fairing Shell Only
42-9999 1996-2013 FLH, FLHX Polished
VT No. Item
42-9998 1996-2013 FLH, FLHX Stainless
51-0751 Shell Only, FLHT, 1996-13
50-0752 Shell Only, FLHT, 2014-up
34-0049 Mirror Block Plate Chrome
34-0052 Mirror Block Plate Black
FLT vent trim kit includes door, clip & gasket.
33-1722
2014-up
Split windshield trim, black finish, 2 pieces 2015-up
42-0235
FLTR
15-0819 Gasket
Fairing Edge Light Kit

• Adds forward-facing white LED accent lights to the front profile 49-0826
of your bike. Formed to follow the contour of the batwing fairing,
the slim strip of lamps adds a strong visual element to the shape
of the Electra Glide® model. The electrifying appearance gets
you noticed, and the smoked housing conceals the lights and 49-0819
blends into the background when switched off. Simple plug in
connections with no cutting or splicing of the wires required. Air Duct Bezel.
OEM# 68000104. VT No. Finish Years
• Fits 2014-up FLH, FLHTCUTG, FLHX, FLHTCU 49-0826 Chrome 2014-up
VT No. 33-1678 49-0819 Black 2014-up
WWW.VTWINMFG.COM 19
Fairing
TOURING
42-9960 42-9995 42-9997
Chrome Lower Fairing Trim

• Perfectly formed to cover cracked or peeling decals.
42-9996
VT No Year
42-9960 FLT 1986-95
42-9995 FLT 1996-13 Inner Fairing Trim Kit includes complete chrome trim for
dressing all gauges, radio faceplate, and speakers, and a
gloss black dash fascia. Easy to install with self-adhesive
backing. Fits 2014-up FLHX, FLHT.
42-9997 Inner fairing trim kit 61400199
Inner Fairing Trim Kit includes complete chrome trim for
dressing all gauges, radio faceplate, and speakers.
Tinted Radio Cover Easy to install with self-adhesive backing. Fits 2015-up FLTR.
• Protects aftermarket radios from the elements, and fits in the 42-9996 Inner fairing trim kit 61400296
factory dash opening rather than the radio mounting surface.
The radio cover is UV stable and scratch resistant. The O-ring
seal creates a water tight fit.
VT No. Fits
42-0009 1996-2013 FLHT, 1996-2013 FLHX.
51-0420 51-0421 50-0010
49-0736
Dark Smoke Fairing Deflector Set 49-0737

VT No. Fits Deep Groove Inner Fairing Speaker Grill Set
51-0420 FLH 1996-2013, FLHX 1996-2013
VT No. Fits Type
51-0421 FLH 2014-up, FLHX 2014-up 50-0010 FLT 2000-2013 Chrome Deep Groove
39-0702 39-0703 39-0700 39-0704 49-0736 FLT 1996-2013 Chrome
49-0737 FLT 2014-up Chrome
Instrument Gauge Bezel Cover

• Take just seconds to install and add beauty to your dash-
board. Available in chrome or black finish. Include adhesive
tap for easy press in place installation. **Note: Cover fits 2”
diameter gauge. *Note: 39-0702 is sold as each and 39-0703
is a set.
Fits Years/ Ignition Switch Cover Set
Chrome Black • Fits 1996-2009 FLHT-FLHTCU and FLHX Touring models.
Gauges Models
VT No. 42-0166
Speedo &
39-0702* 39-0703* 1996-99 FLHT, FLTR
Tach
39-0700
Speedo &
Tach
2000-13 FXD,
2013-up FXD, FXSB, FXT
12V Receptacle
• For cell phone, MP3
Volt, Air player or lighter.
Temp 1986-13 FLHT, FLHX, VT No. 32-0845
39-0704** 39-0705**
Fuel & Oil FLTRX, FLHTCUTG
Pressure
20 WWW.VTWINMFG.COM
Windshield
TOURING
50-0278
42-1746 42-1747
Road Glide Windshield Chrome Trim
• Machined from billet and chrome plated these trim sets add a
chrome accent to the center and sides of fairing.
50-0279 • The center trim will fit with original side trim (except on CVO
models). Side trim kit designed to be used with 42-1745 center
trim kits.
• Fits 2015-up FLT
VT No. Item
Heavy Duty Inner and Outer Fairing Support
42-1746 Center trim
Bracket Set.
• Made with thicker grade steel to eliminate breaking, which is a 42-1747 Side trim
problem on all Touring models.
• Each set has one left hand and one right hand support brack- 42-0235
et included. Note: Hardware is not included. Fits all 1996-2013
FLHT and FLH models.
VT No. Type
50-0278 Inner Support
50-0279 Outer Support
42-0007
Road Glide Split Windshield Trim

• This easy to install 2 piece trim kit adds a speed-stripe accent
to the base of the windshield. Tapered from the leading to the
trailing edge, the glass-smooth trim features counter bored
FLT Upper Fair Bracket Repair Kit mounting holes and flush-mount hardware for a clean elegant
• Repairs both left and right upper fairing bracket look. Kit includes left and right trim installation hardware.
without removal of upper bracket from motorcycle. Kit • Fits 2015-up FLTR
includes left and right brackets and hardware.
VT No. 31-0344 Chrome Black OEM
42-0007 42-0235 57400299
51-0050 51-0051
50-0616 50-0617
Fairing Support Kit

• For 2015-up FLTR Road King models
• Available in chrome or gloss black finish
• Clamps to engine guard
VT No. Fits
50-0616 2015-up FLTR Chrome 51-0052 51-0053
50-0617 2015-up FLTR Black Chrome Fairing Support Bar
Factory Spare Parts Book VT No. Fits
VT No. OEM Fits 51-0050 FLTRX 2010-2013
48-0718 99456-03 2003 FLT 51-0051 FLTR 2009
51-0052 FLTR 2004-2008
51-0053 FLTR 1996-2003
WWW.VTWINMFG.COM 21
Windshield
TOURING
51-0329
51-0328
51-0302
Heavy Duty Windshield
• By National Cycle are wide frame windshields for bikes with
widely spaced forks.
VT No. Tint Height Range Fits
51-0242 Light 20" to 21¹⁄₂” FLHS 1993-up 51-0305
51-0304
51-0302 Light 14¹⁄₂” to 15³⁄₄” FLH 1977-1993
1980-92 FLT
Headlamp &
Spotlamp Kit
• Includes chrome ABS head-
lamp housing, 7” round lamp
unit and complete spotlamp 51-0327 51-0350
kit and turn signals.
National Cycle Repl. Windshield Screen
• For models with fairings, height and tint as noted.
VT No. Style Height Fits
VT No. Item 51-0328 Tinted 14" FLT 1996-2009
33-0540 Kit 51-0329 Smoked 10" FLT 1996-2009
51-0242 Windshield 51-0304 Clear 12" FLHT 1986-1995
31-0438 Bracket for Shield 51-0305 Tinted 6" FLHT 1986-1995
33-2036 Spotlamp Kit 51-0327 Clear Stock FLHT 1996-2009
51-0350 Clear Stock FLHR 1997-2007
31-0438
Chrome Windshield Bracket Kit

• For use with a chopped style windshield
VT No. Fits Replacement Windshield Window
31-0438 FLHS 1977-84 • Fits National windshields.
Chrome Windshield VT No. Fits
Deflector Set 51-0311 FLHS 1993-up Clear
• Mounts onto fork brackets. 51-0308 FLHS 1993-up Blue
VT No. Fits
51-0309 FLHS 1993-up Black
FLHT 1985-13, FLT 1985-
50-1008 50-1008
13, FLHR 1985-13
Chrome Windshield Mounting
Bracket Kit
• Replaces 58069-93 right and left brackets
to fit 1987-92 FLHS and 1983-92 FLHTC.
31-0458 Hardware included. VT No. 31-0458
Chrome Windshield Bracket Kit

• Replaces OEM 57951-92 for 1986-up FLST,
1987-up FLSTF and 1988-up FXSTS. Black Vinyl Retro Windshield Bag
VT No. 31-0437 • Attaches to Lexan Sports shields.
VT No. 48-1679
22 WWW.VTWINMFG.COM
Windshield
TOURING
51-0426
51-0425
12” Wind Splitter Windshield

• A great look for all Touring models and is shaped for the
perfect combination of effective air flow management and style.
National Cycle Wave QR Windshield The sweeping design complements the shape of the fairing
• Manufactured from dark tint polycarbonate that features free and the inner dash panel and adds height over a traditional
flowing lines, adjustable rake partitioning and quick release low-profile wind-deflector in the center where it counts.
mounting. Order mounting hardware separately. • The shape decreases wind noise and improves the ability to
hear the motorcycle’s sound system.
• 10.50” (26.7cm) 18.00” (45.7cm)
VT No. Fits
*Note: Will not work with spotlight bar
VT No. Fits 51-0425 2015-up FLTR
51-0281 1994-16 FLHR Road King 51-0426 1998-2013 FLTR
51-0281 1998-14 FLHRC Road King Classic
50-0424
51-0281 2004-07 FLHRS Road King Custom
31-9946 Mounting Hardware
51-0417 50-0423
National Cycle FLHR Replacement Polycar-

bonate Shield
• Features pre-drilled mounting holes for use with stock
mounting hardware and is 33% thicker than original wind-
shield Available 13³⁄₄” tall dark tint. Fits 1994-up FLHR. 10” Batwing Fairing Windshield
VT No. Height Color Clear Smoke OEM Fits
51-0417 13³⁄₄” Dark Tint 51-0423 51-0448 57400227 2014-up FLHT, FLHX
51-0424 51-0449 58301-96 1996-2013 FLHT, FLHX
Black Windshield Deflector
51-0422 • Adds a touch of chrome to the Mid-Frame Air Deflectors.
These blend the look of chrome from the engine and help
make the deflectors integrated with bike. Mounts to the frame
below the seat for rider’s comfort in the heat. The mounting
hardware, the thumb screw, must be ordered separately. Fits
2009-up FLT and Trike models equipped with Mid-Frame Air
Deflectors.
VT No. 51-0422
WWW.VTWINMFG.COM 23
Windshield
TOURING
51-0400 51-0401 51-0404
V-Stream Series Windshields

For FLHT 1996-13, FLHX 1996-13
51-0400 Clear 17"
51-0401 Clear 14"
51-0402 Dark 10³⁄₄"
51-0404 Light 10³⁄₄"
51-0403 Dark 7¹⁄₄"
For FLTR 1998-2013 51-0402 51-0403
51-0405 Clear 18"
51-0406 Clear 15¹⁄₄"
51-0407 Dark 9¹⁄₄"
51-0413
51-0405 51-0407
The typical airflow pattern of the wake from most windscreens is
called a van Karman vortex. At speeds of 50-90 mph, the air swirls
off the windscreen in an approximate 90-degree segment of rotation,
hits the bottom of the rider’s neck on the way up, and curves off the
shoulder at approximately 45 degrees.
51-0415
For FLHT 2014-up Electra Glide/Tri The patented “V” shape is so quiet because it pushes this vortex out
Glide and FLHX (Street Glide) and away from the side of the rider’s head. The rider’s helmet then re-
sides in still air, and the passenger’s environment is greatly improved
51-0413 Light Tint 9.6” as well.
51-0414 Light Tint 7.6”
Reduced wind noise... less turbulence... superior strength... perfect
51-0415 Dark Tint 7.6” style. The VStream revolution is here!
National Cycle Wave Windsreens offer riders a

custom look for baggers. Wave windsreens are
Quantum Hardcoated polycarbonante for unbeat-
able scratch resistance and impact strength.
Available in clear, light tint and dark tint.
Wave Series Windscreen.
For FLT 1996-2013, FLHX 1996-2013
VT No. Tint Height 51-0450 51-0452 51-0454
51-0450 Dark 5¹⁄₄"
51-0452 Light 7³⁄₄"
51-0454 Clear 10"
For FLTR 1998-2013
51-0451 Dark 5¹⁄₄"
51-0453 Light 7³⁄₄" 51-0451 51-0453 51-0455
51-0455 Clear 10"
24 WWW.VTWINMFG.COM
Windshield
TOURING
51-0447
31-9946
51-0351 51-0361
National Cycle Switchblade Removable Windshield 51-0447
• Allows installation or removal in four seconds without tools. Installed
• Available in three sizes for three styles of riding and features
4.0 mm Lexan Polycarbonate with quantum coating in either
clean or tint.
• Order mounting system separately.
SwitchBlade® Quick-Release Windshields Applications
HARLEY-DAVIDSON®
Model Mount 2-up Chopped
Year
Name Kit Clear Tint
FLH Models
(With/Without Light Bar Installed)
FLHR Road
1994-16 31-9946 51-0351 51-0361
King
FLHRC Road
King Classic
1996-13 31-9946 51-0351 51-0361 Screens for Windshields
FLHRS Road • Dark Smoke Tint
2004-07 31-9946 51-0351 51-0361
King Custom • Fit 1996-up
• Batwing Style
VT No. OEM Fits Height Style
51-0440 57185-05 1996-13 FLHT, FLHX 7” Deflector
51-0441 57400205 2014-up FLHT, FLHX 7” Splitter
51-0442 57400243 2014-up FLHT, FLHX 5” Deflector
51-0443 57400091 1996-13 FLHT, FLHX 4.5" Splitter
51-0444 57400204 2014-up FLHT, FLHX 4.5" Splitter
51-0445 58207-04 1996-13 FLHT, FLHX 4” Deflector
51-0286
51-0446 57400229 2014-up FLHT, FLHX 7” Deflector
51-0447 57164-10 1996-13 FLHT, FLHX 7” Splitter
51-0285
51-0284
National Cycle Spartan Quick Release
Windshield
• Features a full size quantum clear hand coated polycarbonate
windshield, quick release hardware and a black powder coated
mounting frame.
•Available in 16¹⁄₄” and 18¹⁄₂” heights. Height is measured from Lightly Tinted Heavy Duty Windshield
head lamp cutout to top of shield. • For bikes with widely spaced forks.
VT No. Height Fits Mt Hardware
• Offers plenty of height and width for larger riders. The height
51-0284 16¹⁄₄” 1986-up FLST 31-9939 is adjustable and ranges from 20”-21¹⁄₂”. The classic look
51-0285 16¹⁄₄” 2006-up FXD 31-9947 enhances the front end of your bike. Mounting hardware is
51-0286 18¹⁄₂” 1986-up FLST 31-9939* required and sold separately. **Note: D.O.T. approved.
VT No. OEM Fits
51-0287 18¹⁄₂” 2006-up FXD 31-9938
*Note: When installing shield with spotlight bar use 31-9938 kit 51-0364 58243-95 1993-up FLT.
WWW.VTWINMFG.COM 25
Engine Dress Kits
TOURING
43-0534 8916-17T
Chrome Primary Cover Screw Kits

• Include all necessary screws and washers.
VT No. Head Style Fits
9959-38 Knurled FLT 1999-2006
9959-38T Knurled FLT 1999-2006
8916-17 Allen FLT 1985-1999
8916-17T Allen FLT 1985-1999
43-0515
Lower Only
9859-20 1989-99 FLT Chrome
9928-20 1989-99 FLT Allen
9928-20-P 1989-99 FLT Polished Allen
Trans to Motor Mount FLT
9935-8-P 1999-up FLT Polished Allen
43-0514
42-1167 42-1168
Starter Motor End Cover

• Dresses the end of the starter motor for a clean look on all
2017-up FLT models. Available with chrome or gloss black.
Black Chrome
Chrome Engine Dress Up Kits 42-1167 42-1168
• Include chrome parts and hardware for installation.
M-8 Valve Spring Kit
VT No. Fits
43-0534 FLT 2001-2006 TC-88 with Steel Retainers
42-0692 • Includes beehive style
FLT 1999-2000 TC-88
with ovate wire and steel
43-0528 FLT 1994-1998
retainers with a 4.65 lift.
43-0515 FLT 1987-1988
VT No. 13-2087
43-0514 FLT 1985-1986
16-2753 16-1203
Jims Flywheel Locking and Decommissioned Tool locks the

flywheel in place making service procedures easier. This tool is
very visible and useful to designate a bike as decommissioned.
The bike will not start and clutch must be engaged in order to
move bike when this tool is installed. Use on all Twin Cams
1999-up and 2017-up M-8 models.
VT No. Fits
16-2753 Twin Cam
16-1203 M-8
26 WWW.VTWINMFG.COM
Primary Cover
TOURING
43-0883 43-0276 43-0294
43-0248 43-0232
42-0272
43-0209 43-0267
Chrome Outer Primary Cover Only

• With machined components installed.
• Order screws, gaskets, and other hardware separately.
VT No. Fits
43-0883 FLT 2007-2016
43-0276 FLT 1999-2006
43-0248 FLT 1999-2006, Accepts a 5-hole derby
43-0560
43-0232 FLT 1989-1993
43-0209 FLT 1985-1988
Chrome Outer Primary Cover Kits

• With or without derby covers
43-0885 43-0886 • Die cast stock replacement outer cover kit comes with chrome
Narrow Profile Outer Primary Cover primary cover, chrome allen screws, outer cover starter bearing
derby, inspection and outer cover gaskets included.
• 1” narrower than the stock outer primary that will allow easier
reach to the ground and is shaped to slim the bike profile on Without Derby With Derby Fits
the left side. Stock replacement for all 2015-16 FLHTCUL and 43-0249 FLT 1999-2006
FLHTKL models but can be used on all 2007-14 FLT models, 43-0782 43-0294 FLT 2007-2015
but requires the purchase of 2015-up derby cover and primary 43-0265 FLT 1994-2006
gasket service gasket kit. 43-0560 FLT 1994-1998
Chrome Black Fits 43-0341 43-0267 FLT 1989-1993
43-0885 43-0886 2015-16 43-0340 43-0272 FLT 1985-1988
42-1376 42-1377
15-1566 43-0000
M-8 Primary Cover
Chrome Black Fits
43-0001 43-0000 2017-up
42-0223 42-0224
15-1566 15-1566 2017-up Primary Gasket Kit
Narrow Profile Derby Covers 43-0383 2017-up M-8
VT No. OEM Style Year
42-1376 25700388 Air Flow 2016-up Cometic Primary Cover
42-1377 25700477 Black Air Flow 2016-up Gasket for M-8 models.
15-1473 VT No. 15-1473
42-0223 25700388 Chrome 5 Hole Smooth 2016-up
42-0224 25700477 Black 5 Hole Smooth 2016-up
WWW.VTWINMFG.COM 27
Primary Derby Cover
TOURING
42-0036 42-0108 42-0991 42-6070 42-0579 42-0107
42-9944 42-0747 42-0470 42-0471 42-1073 42-1086 42-1087
42-1118 42-1090 42-0605 42-9965 42-0102 42-1145 42-0124
42-1387 42-1388 42-1376 42-1144 42-0632 42-0558 42-0091
42-0580 42-0578 42-0975 42-6026 42-0120 42-0481
42-7104 42-7102 42-0195 42-1373 42-1543
2016-up
42-0222 42-0223 42-0224 42-0225
42-0226 42-1376 42-1377
42-0531
28 42-0131 WWW.VTWINMFG.COM
42-1120
Primary Derby Cover
TOURING
Style
3-Hole 5-Hole* 5-Hole Primary Derby Cover
1979-98 1999-15 2016-up** • Order screw kits and gaskets separately.
V-Tech 42-0036 *Note: These fit 1999-up FXST, FLST, FXST, 1999-15 FLT.
3-D Spinner 42-0108 **Fits 2016-up FLT only but can be used with 2007-up if
Red Baron equipped with a narrow profile primary cover
Iron Cross 42-0975
Iron Cross Billet 42-6070 42-6025
Cross 42-6026
Cross Type 42-0579
Eagle Spirit Chrome Inlay 42-0107 42-0950 42-0226
Eagle Spirit Gold Inlay 42-9944 42-0849
Chrome Flame 42-0747 42-0922
Chrome Raised Flame 42-0470 42-0466
Black Raised Flame 42-0471 42-0467
Lady Luck 42-1073 42-1074 42-0238 42-0241
Chrome Ball Milled 42-1086 42-1088
Chrome Contour 42-1087 42-1091
Chrome Perforated 42-1090 42-1089
Smooth Ring 42-7102 42-0120
Smooth Flat Chrome 42-0124
Smooth Dome 42-0605 42-0129
Early Bird Style 42-9965
Polished Finned 42-0102
Black Finned 42-0632
Note: Raised center portion on skull medallion. 42-2025 42-2026
Evil Skull Chrome on Black 42-0558 42-0559
Evil Skull Chrome on Chrome 42-0091 42-0092 42-0817 Installed
Big Skull Chrome on Black 42-0580 42-1081
Bonehead Chrome 42-0578 42-1057
Black Ball Milled Cover 42-1140
Grooved, Chrome 42-1142 42-1141
Grooved, Black 42-1150
Grooved, Chrome 42-1144
Grooved, Black 42-1145
Air Flow Chrome 42-1379 42-1372 42-1376
Air Flow Black 42-1380 42-1373 42-1377
Nostalgic Chrome 42-1387
Nostalgic Black 42-1388
Smooth Dome Chrome 42-1029
42-1226
Finned Polished 42-0102
Flame Chrome 42-1075
Smooth Chrome 42-0190 42-0223
Smooth Black 42-0195 42-0191 42-0224
Eagle Spirit Derby Black 42-0481
Eagle Spirit Derby Black with
42-7104 42-0225
chrome accents
C-Thru Chrome 42-0238 42-0240 42-1225
C-Thru Black 42-0239 42-0241 Chrome Derby and Inspection Oval Sets
Black Contrast 42-1543 • For primary covers.
Mesh 42-2025 42-2026
VT No. Style Fits
Chrome Skull 42-0263 42-0269 42-0817 Flame FLT 1979-1998
Black Skull 42-0264 42-0270 42-1226 V-Twin Vented FLT 1979-1998
42-1225 Billet Vented FLT 1979-1998
42-0740 42-0944
Chrome Primary Inspection Covers
VT No. Style Fits
42-0740 Smooth FLT 1985-2006
42-0944 Flame FLT 1985-2006
WWW.VTWINMFG.COM 29
Cam Cover 42-0118
TOURING
42-0111
10-0088
10-1298
10-0297
Installed
10-0297
10-0040
42-0111
Installed
10-0080
Chrome Nose Cone Cam Trim
• Fit over stock cam cases on Big Twins.
No need to remove the cam case or disturb the cam or gears.
VT No. Fits
42-0118 1993-1998 FLT
10-0286 1993-1999 FLT
42-0111 1979-1992 FLT 10-0798
42-0121 1999-2016 TC-88
Nose Cone Gear Cover
• Fit Big Twin models. Bushings installed. Seal included.
VT No. Years Finish
10-1298* 1973-93 Black
10-0088* 1973-92 Polished
10-0040* 1973-92 Chrome
10-0111* 1973-92 Chrome
10-0297 1993-99 Black
42-0702 10-0813 10-0080 1993-99 Chrome
10-0040* 1973-92 Chrome
10-0798 1993-99 Chrome
*Note: Comes with mounting screws, gasket and seal.
42-1054
9946-20 9819-12
Cam Cover
VT No. Fits Item
42-0702 2001-2016 Chrome
10-0813 1999-2000 Chrome 8761-7
42-1054 2001-2016 Black 7402-7
Cam Cover Mount Kit
9946-20 Stock FLT 1999-2016
9946-20-P Polished FLT 1999-2016
9819-12 Allen FLT 1993-1999
8761-7 Allen FLT 1984-1992
9305-7 Stock FLT 1979-1992
7402-7 Acorn FLT 1979-1992
30 WWW.VTWINMFG.COM
Ignition Points Cover
TOURING
Ignition Points Covers
• 2-hole covers fit FLT 1979-1998.
• 5-hole covers fit FLT 1999-up.
Style 2-Hole 5-Hole
Black Mesh Flame 42-0465 42-0462
Chrome Flame 42-0748
Chrome Eagle Spirit 42-0106 42-0889
Gold Eagle Spirit 42-0088 42-0465 42-0462 42-0748 42-0106
Chrome Red Baron 42-0177 42-0178
V Tech 42-0035 42-0146
Domed 42-0299 42-0119
Flat 42-0662
Skull 42-1058 42-1059
Flame with Skull 42-0065
Smooth 42-0155 42-0125 42-0088 42-0177 42-0035 42-0299
Maltese Flat 42-0960
Maltese Raised 42-0961
Maltese Raised 42-6100 42-6055
Skull Face 42-0081 42-0075
Black Skull 42-0560 42-0562
Skull 42-1082
Black Domed 42-1116 42-0662 42-1058 42-0065
Black Perforated 42-1125 42-1119
Black Flame 42-1122
Chrome Perforated 42-1093
Chrome Contour 42-1094
Skull Design 42-0581
Chrome Flame 42-0474 42-0472 42-0155 42-0960 42-6100 42-0081
Black Flame 42-0475 42-0473
Hidden Screws 42-0956 42-0957
Smooth Black 42-0189 42-0197
Smooth Chrome 42-0198 42-0196
Grooved Chrome 42-1148 42-1144
Grooved Black 42-1166 42-1145
Chrome Hidden Mount 42-0956 42-0957 42-0562 42-1082 42-1116 42-0969
Chrome Air Flow 42-1383 42-1381
Black Air Flow 42-1384 42-1382
Chrome Nostalgic 42-1389
Black Nostalgic 42-1390
V2 Alloy 42-1195
Black Contrast Cut 42-1546
Chrome Skull 42-1200 42-1198 42-1122 42-1093 42-1094 42-1095
Black Skull 42-1201 42-1199
42-6055 42-0474 42-0475
42-1195 42-1166 42-1145 42-1546
42-0956
42-1383 42-1381
42-0198 42-0196
Hardware for Points Covers
• Screw kits for points covers with head styles as noted
VT No. Style Fits
8765-2 Allen FLT 1979-98
8402-2 Acorn FLT 1979-98 42-1384 42-1389
42-1382 42-1390
9954-5 Allen FLT 1999-16
WWW.VTWINMFG.COM 31
Pushrod Cover Kit
TOURING
11-9980 11-9665 11-1090 Installed

11-1090
11-1407 11-0359
11-1081 11-1081 Installed
Pushrod Set Pushrod Cover Kit
VT No. Item
VT No. Finish Fits
11-9980 M-8 Quick Install Pushrod Set
11-1090 Gold Titanium 1986-99
11-9665 M-8 Quick Install Pushrod and Cover Kit
11-1081 Titanium 1999-16 TC-88
11-1407 M-8 Pushrod Cover Kit Chrome 11-1213 Titanium 2017-up M-8
11-1408 M-8 Pushrod Cover Kit Black 11-1137 Chrome 2017-up Lowers
11-0359 1984-98
11-0938 Chrome Billet Pushrod Cover & Tappet Base Kit

Installed VT No. Fits
42-0937 FLT 1999-2016
Chrome Pushrod and Tappet Trim Set

• Covers as a complete dress up kit for Big Twin models.
11-0376 11-0938d
VT No. Fits
42-0903 FLT 1984-1998
37-9078 37-9078
11-0909 11-0945
Pushrod Cover Kit
• Includes tubes and all seals for complete installation. 11-0024
11-1073
VT No. Style Fits Finish
11-0938 Stock FLT 1999-2016 Chrome Pushrod Cover Cup Set
11-0376 Stock FLT 1999-2016 Black • Features die-cast construction in chrome or gold, set of four.
VT No. Finish Style Fits
11-0943 Billet FLT 1999-2016 Chrome
11-0909 Stock FLT 1984-1998 Chrome 37-9078 Chrome Skull FLT 1979-up
11-0947* Billet FLT 1984-1998 Chrome 11-1073 Brass Hex FL 1941-1984
11-0945 Billet FLT 1984-1998 Chrome 11-0024 Black with chrome skull, FLT 1979-up
*Note: Features screw type center section. Expands to correct 11-0029 Chrome with black skull, FLT 1979-up
length.
32 WWW.VTWINMFG.COM
Engine Dress-Up Kit
TOURING
10-0811
42-0929
Chrome Head and Spark Plug Cover

10-0815 • Held in place by rubber inserts which are supplied in kit.
VT No. Fits
42-0929 FLT 1986-1999
Chrome Tappet Block Set
• Accepts standard sized tappet assembly in varied styles as
noted. Sets include gaskets, *Note: 11-9506 Hardware sold
separately.
VT No. Style Fits
10-0811 Stock FLT 1999-2016 42-1160 42-1170
10-0815 Billet FLT 1999-2016 Finned Spark Plug Cover
11-9506* Stock FLT 1984-1998 • Fits 2017-up M-8
VT No. Color
Hardware for Tappet Blocks 42-1160 Black
• For the installation of our tappet block sets. 42-1170 Granite
VT No. Style Fits
9942-16 Chrome Allen FLT 1999-2016 Chrome Big Twin
7628-8 Chrome Acorn FLT 1979-1998 Engine Case Trim
8726-8 Chrome Allen FLT 1979-1998 • Mounts to center case stud.
8708-8 Chrome Stock FLT 1979-1998
VT No. Fits
8710-8 Black Stock FLT 1979-1998
15-1542 Gasket for 11-9506 FLT 1979-1998 42-0746 42-0746 FLT 1984-1998
Chrome Rear Engine Cover.

VT No. Fits
61-0134 1987-1995 FLT
42-0437 42-0458
42-0794 Installed
42-0437 Installed
Chrome Tappet Cover Trim Set Chrome Top Oil Pump Cover
• Fits over stock blocks. Each cover has a slot which allows • Use for top replacement cover and includes mounting hardware.
it to be installed without removing pushrods. VT No. Fits
VT No. Type Fits
42-0794 FLT 1993-1995, FLHR 1993-1998
42-0437 Steel FLT 1984-1998
42-0458 Die Cast FLT 1984-1998 42-0530
Chrome Engine Dress Up Kit

• Includes chrome covers for oil filter Chrome Oil Pump Cover
housing, tappet blocks, and oil pump. • Mounts onto the existing bolts on Big Twin models.
VT No. Fits
VT No. Fits
42-0654 FLT 1992-1998
42-0530 FLT 1992-1998
WWW.VTWINMFG.COM 33
Pushrod/Clutch
TOURING
11-1407
18-2157
11-1408
18-2158 18-2159
Clutch Assembly
• Fits 2014-up
VT No. Item
18-2157 Complete
18-2158 Clutch Basket
18-2159 Clutch Hub
Clutch Pak Kit
Pushrod Tube Cover Kit • Features stock style components for a
• Fits 2017-up M-8 complete clutch installation.
VT No. Item
• Includes hub, clutch drum, clutch
11-1407 Chrome damper spring seat and spring, clutch
11-1408 Black (Powder Coated) retaining ring external and internal, Alto
Red Eagle clutch set, steel clutch plate
set, clutch release plate, diaphragm
Barnett Kevlar Clutch Kit clutch spring, and clutch retaining screw.
• 2017-up FLT • OEM# 37813-06A.
VT No. 18-3273 18-0594
• Fits 2007-10 FLT
VT No. 18-0594
Display Center Stands
16-1600 16-1600
Installed 16-1109
Adjustable Display Center Stands

• Single lever on left side allows bikes to be lifted up on
16-1116 stand. Very little effort required.
• Entire assembly fits neatly under frame rails.
• 2 bolt installation.
Caution: Not intended for use as a ride off stand.
VT No. Year Finish
16-1600 1980-08 Black
16-1110 16-1109 1989-08 Black/Chrome
16-1110 2009-up Chrome
16-1116 2009-up Black
34 WWW.VTWINMFG.COM
Dress up Screw
TOURING
37-9537
From Wyatt Gatling
Chrome Bolt Cap Kit
• Contains chrome bolt cap covers constructed of ABS plastic. From Gardner-Wescott
VT No. Piece Qty. Fits
37-9539 126 FLT 2009-2016 Engine Chrome Dress up Screw Kits
VT No. Fits
37-9537 105 FXCW, FXCW 2009-up
37-9540 148 FLT 1999-2008 37-9300 1987-90 Evolution Big Twin FLT
37-9526 75 FLT 2007-2008
7918-G 7926
From Gardner-Wescott
Engine Dress up Acorn Bolt Kit
• For motor and transmission area. *All kits are chrome finished
Chrome Allen Builders Fastener Sets except 7918-G, which is gold finished.
• The perfect combination of allen screws & acorn nuts.
VT No. Fits
VT No. Fits
7926 FLT 1999-2006 TC-88
37-8098 FLT 1999-2006 TC-88
7918-G* FLT 1985-1986 Evolution 5-Speed
37-0084 FLT 1984 Evolution 5-speed
7918 FLT 1985-1986 Evolution 5-Speed
7931 FLT 1996-1998
7930 FLT 1992-1995
Assorted Chrome Screw Kits

For FLT 2007-up
VT No. Head Style Application
2400-12 Allen Oil Pan Mount
2532-14 Acorn Transmission Side Cover Chrome Polished Allen Head Show Bike Kits.
2401-15 Allen Transmission Side Cover Model VT No. Year
2534-19 Acorn Primary Cover FLT 1019-P 1987-91
2402-18 Knurled Allen Primary Cover 37-1502 37-1503 37-1504
2402-18T Knurled Allen Primary Cover
2533-6 Acorn Transmission Shifter Cover
Snap Caps™ snap on knurled allen screws for ease of instal-

lation. Packs of 25 or 100.
100 PACK 25 PACK Fits
Cam & Primary Cover Chrome Screw Sets
• Include transmission, chain, clutch or derby provided where 37-1502 37-1526 ¹⁄₄”
applicable. By Gardner-Wescott. 37-1503 37-1527 ⁵⁄₁₆”
VT No. Fits 37-1504 37-1528 ³⁄₈”
37-8503 1985-86 FLT 5-Speed 300 PIECES
37-1505 — Assortment
WWW.VTWINMFG.COM 35
Engine Dress-Up Kit
TOURING
11-0354
11-0946
Chrome Rocker Box Sets

Top Rocker Box Sets from Wyatt • Includes 2 upper covers and 2 lower housings.
VT No. Style Fits VT No. Item Fits
11-0354 Contoured FLT 1999-2016 11-0946 Top Covers and Lower Housings FLT 1999-2016
11-0002
Rocker Box Cover

• Fit 2017-up M-8 models
Chrome Black Type 43-0377
11-0002 11-0000 Top
Chrome Top Rocker Box Cover & D-Ring Set
11-0003 11-0001 Lower • Order gaskets and screws separately.
VT No. Year
43-0377 1992-99
37-8897 37-8799
42-1152 42-1153
37-9131 2024-4
2262-4 42-1092 42-1154 42-1155

Head Bolt Cover Sets
• Include four covers with set screws to conceal 12 point head Finned Head Bolt Bridge.
bolts on 1984-17 Evo and Twin Cam Engine models. • Bolts on!
VT No. Finish Style Fits Silver Black Model
37-8897 Chrome Dome 1984-85 42-1152 42-1153 EFI
9000-4 Chrome Acorn 1984-85 42-1154 42-1155 Carb
Chrome
9002-4 Chrome Cap 1984-85
42-1159 — EFI
37-8799 Chrome Cylinder 1986-17 42-1159
37-9399 Black Cylinder 1986-17
37-9131 Chrome Grooved Cylinder 1986-17
2024-4 Chrome Hex Dome 1986-17
2262-4 Chrome Spike 1986-17
42-1092 Brass Grooved Cylinder 1986-17
36 WWW.VTWINMFG.COM
Engine Dress-Up Kit
TOURING
11-2700
42-0787
42-0754
11-2701 Chrome Rocker Box Cover Set

• Precision die cast and machined. The six piece set includes
all necessary gaskets for installation for both heads.
VT No. Fits
42-0787 FLT 1992-1999
42-0754 FLT 1984-1991
11-0621
37-0585
8868-16
15-1503
Hardware for Rocker Box Set
• Screw kits and cover kits are chrome finished. 37-0820
includes sealing washer with built in o-ring for position seal.
VT No. Item Fits
Chrome Rocker Box Set 37-0585 Grooved Screw Cover Set FLT 1999-2016
• Includes two upper and two lower for two heads. 37-0043 Allen Rocker Box Screw Set FLT 1999-2016
• Machined internally for rocker supports. 8868-16 Acorn Rocker Box Screw Set FLT 1984-1998
VT No. Item Fits 8931-16 Allen Rocker Box Screw Set FLT 1984-1998
37-0820 Rocker Box Collar and Screw Kit FLT 1984-1998
11-2700 Rocker Box Set FLT 1999-2016
15-0663 Red Fiber Washer Seal, 50 Pack FLT 1984-1998
11-2701 Rocker Box Set FLT 1984-1998 15-0221 Valve Cover Gasket FLT 1984-1998
Gaskets and Tool to Match 11-0621 Lower Cover Screw Set FLT 1984-1998
15-1503 Gasket FLT 1984-1998 2078-18 Lower Cover Screw Set FLT 1984-1998
27-0945
27-0941
27-0941 Installed
Chrome Lower Rear Belt Guard

• Belt drive models with 70 tooth rear pulley. *Note: 27-1727
covers the existing plastic original lower belt guard.
VT No. Fits
27-0941 FLT 2009-up
27-0945 FLT 1993-2001
27-1727* FLT 1997-2008
WWW.VTWINMFG.COM 37
Transmission
TOURING
43-0787
43-0789
43-0790
43-0537 43-9131
Chrome Transmission Cover

VT No. Fits
Chrome Trans Side & Top Cover Set
43-0787 FLT 2007-up
• Complete with top cover, side cover, chrome allen screws and
43-0537 FLT 1999-2006
chrome allen oil dipstick.
VT No. Fits 43-0789 FLT 1987-1999
43-9131 FLT 1987-1999, FLHR 1998
43-0792 FLT 2000-2006
43-0790 FLT 1987-1999
Hardware for Transmission Covers

8912-13 Acorn FLT 1987-2006, FLHR 1998
8912-13-P As Above Polished
8908-15 Allen FLT 1980-1986 5-speed
43-0504 43-9136 8404-27 Acorn FLT 1980-1985
Gaskets for release covers.
Chrome Transmission Top Cover
VT No. Fits 15-1051 FLT 1987-2006, FLHR 1998
15-1050 FLT 1980-1986
43-0504 FLT 2000-2006
43-9136 FLT 1987-1999
Chrome Hardware for Release Side Covers
9951-12 Acorn 1998-2006
9952-11 Allen 1998-2006
8907-5 Allen 1987-1999
8404-27 Acorn 1980-85
8906-5 Allen 1980-86
18-3212 18-3268
Clutch Release Kit 8907-5T Allen 1988-99
• Inner and outer ramps, ³⁄₈” balls, retaining ring, cable cou- 8910-5 Acorn 1987
pling, and cover gasket. 8911-5 Cap 1987
VT No. Fits
18-3212 1987-99 8922-5 Cap 1988-99
18-3268 2000-up 9952-11-P Allen 2000-06
Chrome Engine & Trans Interface Cover

• Designed to cover oil lines and cleans up the area in
between the motor and transmission and still allows easy Chrome Transmission Dress Trim
removal of dipstick. Fits 1999-2001. • Fully covers end cover and inner door. Fits 1987-99 FLT.
VT No. 42-0698 VT No. 42-0457
38 WWW.VTWINMFG.COM
Shifter
TOURING
21-0256
21-0335
21-0072
21-0681 21-0871
Extended
Stock
Shifter Levers
• Styles as noted. *Note: Two of VT No. 21-0072 are required
for complete assembly.
VT No. Style Fits
21-0335 Center Balanced FLT, FLHT 1986-up
21-0072* Slotted FLT 1983-up
21-0681 Offset Balanced FLT 1986-up Chrome Extended Shifter Lever
Toe 21-2056 • Measures 9³⁄₄” long for extended reach. Constructed of steel
with chrome finish.
VT No. Fits
21-0256 FLT 1986-up
Heel 21-0871 Set
21-2042
Chrome Stock Replacement Shift Levers 21-0471
• With internal spline.
VT No. Fits
Chrome Lever
21-2056 1983-1996 FLT, 2000-up FLT • Features a hinged toe-peg mount slot to fold out of the way.
21-2042 1982-99 FLT VT No. Fits
17-0968 17-0966 17-0666 21-0471 FLT, FLHT 1988-up
21-0106 21-0108
21-0107
Shifter Shaft Spacers

17-0666 • For use with heel/toe shifters. 21-0107 is used to eliminate
Installed the heel shifter or for use on single shifter models.
VT No. Item Fits
21-0106 Short with Grease Elimination Spacer FLT 1979-up
21-0108 Short with Anti-Rattle Washer FLT 1979-up
21-0107 Long with Anti-Rattle Washer FLT 1979-up
Chrome Transmission Shifter Levers

• Include a stainless steel allen screw and washer.
VT No. Style Speed Fits
17-0968 Stock 5 or 6 1997-up FLT
17-0966 Stock 5 1985-96 FLT
17-0666 Sickle 5 1985-96 FLT
WWW.VTWINMFG.COM 39
Shifter
Shifter
TOURING
21-0389
21-0386
Installed
21-0386
21-0055
21-0050 Installed
Billet Heel Toe Shifter Set
• Feature black or chrome finish with billet or without milled slots.
VT No. Style Fits
21-0386 Chrome Slotted FLT, FLHT 1986-17
21-0389 Black Slotted FLT, FLHT 1986-17
21-0050 Chrome FLT 1986-17
21-0055 Black FLT 1986-17
21-1343 Black FLT 2018-up
21-0050
21-1342 Chrome FLT 2018-up
Greaseable Aluminum Inner Shifter Shaft

• With fitting.
• Replaces OE shaft to send extra grease to bushing area for
added lubrication. Replaces OEM# 33709-82A.
VT No. Item
21-0580 Shaft
10-8752 Bushing for Above
21-1342
21-2037 21-2036
Inner Shifter Shaft and Arm
VT No. Style
21-2037 Inner Shaft
21-2036 Inner Arm
21-0754 21-0753
Billet Style Heel Toe Shifter Lever Kit
VT No. Style Fits
21-0753 Chrome Kit FL 2018-up
21-0754 Black Kit FL 2018-up
40 WWW.VTWINMFG.COM
Shifter Rod
TOURING
Maltese
21-0552 21-0556
21-2122 21-2039 21-0502

Flame Maltese
Chrome Shifter Rod Kit
• With swivel arms is 11” overall length.
VT No. Includes Arms Arm Length
21-2122 Yes 11” Goth
21-2039 No 11” 21-0554 Skulls 21-0559
21-0502 Yes 10¹⁄₂”
21-0853 21-0852 Lady Luck

Sword
21-0566
21-0685 21-0561
VT No 21-0557 Installed
Custom Shifter Rod

• Swivel ends and studs built in.
VT No. Style Fits
21-0685 Chrome Flame FLHR 1994-up
21-0852 Black Flame FLT, FLHT, FLHR 1980-1998
Custom Chrome Shifter Rod
21-0853 Black Flame FLT, FLHT, FLHR, FLHX 1990-2010 • Measurement includes threads or custom applications
21-0286 Style 11” 12¹/₄” 13³/₄”
Flame 21-0555 21-0552 21-0544
21-0343 Maltese 21-0556
Skulls 21-0557 21-0554
Goth 21-0560 21-0559
Sword 21-0563 21-0561
21-0284
21-0821
Chrome Shifter Maltese Rod Kit

21-0822 • With swivel arms is 11” overall length.
• Rod measures 10³⁄₄” long and has an overall length including
rod ends of 13¹⁄₄”.
VT No. Fits
Custom Shifter Rod
• Measured relative to stock length. For custom applications. 21-0680 Custom application
Style Stock +2”

Black Agostinni 21-0343
Chrome Drilled 21-0284
Black Ball Milled 21-0821
Black Agostinni 21-0822
WWW.VTWINMFG.COM 41
Kickstand for FLT
TOURING
27-0540
27-1695 27-0539
27-1694 shown with
27-0536
extension
27-1817
27-0987
27-0539
Chrome Kickstand Kit

• Includes jiffy stand, leg, spring, bracket and bumper stop.
27-1736 VT No. Fits
13-9162
27-0539 FLT 1985-2000
27-0540 FLT 2001-2006
27-1007 FLT 2009-up
27-0536
13-0182 13-0545 13-0350
27-1644
27-1440
28-0400 28-0437
Chrome Kickstand and Springs
• To fit FLT stock as replacement. 27-1275
27-0091
VT No. Year Item Kickstand Extension Kits
27-1694 1983-98 Kickstand with spring • Allow rider to more readily access side stand.
27-1695 1984-06 Kickstand Leg Only • Requires drilling ¹⁄₄” hole through kickstand.
27-1817 1984-06 Kickstand Leg 1” under VT No. Model
27-1736 1999-06 Kickstand with spring
27-0987 2007-up Kickstand Leg Only 27-1644 1984-90 FLT, 1986-06 FXST, FLST
27-0998 2007-up Kickstand with spring 27-0536 1984-90 FLT, 1986-06 FXST, FLST
Springs and Bumper Pads 27-1275 1991-up FLT, Chrome
13-9162 1985-98 Chrome
27-1440 1991-up FLT, Black
13-0182 1999-06 Chrome
27-0091 1991-up FLT
13-0545 2007-up Chrome
13-0351 1999-06 Black 27-0070
13-0350 2007-up Black
28-0400 1985-00 FLHR, FLHT, FLR Bumper Pad 27-0853
28-0437 2001-06 FLT, FLH Bumper Pad
28-0706 2007-up FLT Bumper Pad Kickstand Angle Plate
• Fits FLT 1984-86.
Chrome Kickstand Tab Kit VT No. Item Finish Use
• Includes washer, acorn nut, and tab. 27-0070 Plate Alloy Extended Forks
• Fits 1985-06 FLT. 27-0853 Kit Chrome Lowered Forks
VT No. 27-0546 16-1600
16-1110
16-1116 16-1600 Installed

Center Stand
27-0526 27-1525 • Bolts directly to the FLT model frame.
27-0341 • Lifts the bike upright and stands by activating
Chrome Kickstand Mount Brackets the lever on the left side. In this position the bike
VT No. Year looks great for display or servicing. 16-1109
27-0526 1981-08 * Note: Adjustable Height
27-0714 1981-06 VT No. Type Fits
27-1525 2009-up, OEM# 50096-09 16-1110* Chrome Adjustable FLT 2009-up
27-0341 Lowering Wedge,1981-06 16-1116 Black Adjustable FLT 2009-up
16-1109 Chrome Adjustable FLT 1989-08
16-1600 Black Non-Adjustable FLT 1980-08
42 WWW.VTWINMFG.COM
Forward Control
TOURING
22-0905 Police Style Shifter Control Kit
• Clamps to the left front lower neck tube saddle on touring
models. Fits 1980-up FLT 5 Speed.
• Saddle includes a smooth gate, and fits 1¹⁄₄” diameter tube.
VT No. 22-0736
Chrome Billet Forward Control Kit

• Bolt on for FLT models and includes a decorative plug for the shifter 23-9317 23-9425 23-0969 26-0179
shaft hole. Related items also listed.
VT No. Item Fits
22-0905 Forward Control Set 2009-13 FLT
A 23-9266
23-0779 24-0604 23-0781 23-0782
23-0954 B 23-9426
23-1703 C
D 23-1702
23-0013 Front Master Cylinder Covers
VT No. Style Fits
23-0874 23-9317 Smooth FLT 2014-16 Clutch Side
23-9425 Smooth FLT 2017-up Clutch Side
Complete Remote Mount Master Cylinders 23-0969 Smooth FLT 2008-up Brake Side
VT No. # OEM Year Fits 26-0179 Smooth FLT 2005-2007 Front
23-9266 A 41755-86 1986-91 FLT Chrome 23-0779 Smooth FLT 1996-2005
23-0954 B 41755-92A 1992-94 FLT 24-0604 Smooth FLT 1996-2004
23-0874 D 41708-08 2008-14 FLT Chrome 23-0781 Billet Milled FLT 1996-2004
23-1702 C 41755-95 1995-96 FLT Chrome 23-0782 Flat FLT 1995-2004
23-1703 C 41755-97 1997-98 FLT Chrome 23-9426 FLHXXX 2017-up
23-0458 41755-99 1999-04 FLT Black
23-0013 41755-04 2005-07 FLT Chrome
42-0973 23-0768
23-1152 23-0968
FLT Front Brake Line to Caliper Bleeder 23-0770 26-0188

Screw and Banjo Bolt Kit Rear Master Cylinder Reservoir Cover
• Fits all 2008-up FLT models front caliper, with or without ABS. VT No. Fits
• Includes two bleeder screws, two banjo bolts, two dust caps, 23-0968 FLT 2008-up Rear
and four gaskets. 42-0973 FLT 2005-2007
Chrome Black Fits 23-0768 FLT 1999-2004
23-1151 23-1152 FLT, FLHT, FLTR 2008-up 23-0770 FLT 1999-2004
26-0188 FLT 1996-2004
WWW.VTWINMFG.COM 43
Brake Pad
TOURING
23-0472
Adjustable 23-0402
23-0472
Chrome Adjustable Forward Brake Pedal Chrome Forward Pedal

• Allows multiple positions for riders comfort. • Allow full use of footboard as pedal pad is moved to the edge
VT No. Fits of the board.
23-0472 1997-07 FLT • Includes rubber pad. Fits 1997-07 FLT.
23-0473 1997-07 FLT, Center mount to end of pedal is 11” VT No. 23-0402
Slotted 23-0244 Solid 23-0668

Solid 23-1325 Forward Brake Pedal
• Fits 1997-07 FLT
Chrome Extended Brake Pedal VT No. Finish
• Constructed of chrome steel with 1” extension.
23-1345 Chrome
VT No. Style Fits 23-1348 Black Contrast
23-0668 Solid FLT 1997-2007
28-0761 28-2252
23-0244 Slotted FLHT 1997-2007
23-1325 Solid FLT 2008-2013
23-1327 Slotted FLT 2008-2013
28-2233
23-0477 Billet Brake Pedal Pad.

VT No. Style Fits
28-0761 Chrome Flame FLT 1980-up
23-0477 Installed with pedal pad 28-2252 Three Inserts FLT 1980-up
28-2233 Stock Rubber FLT 1983-up
Note: Pedal pads feature die cast backing with black rubber
insert pads.
23-0061
23-0061 Installed with pedal pad 23-0975 23-0976

Billet Pedal FLT Brake Pad Pin Kit
• Available smooth, slotted, chrome or black. • Includes two pins & two retaining clips for stock type calipers
Slot Contrast Chrome only.
Years • Fits 2008-up FLHT, FLHR, FLHX and FLTR models.
Chrome Black Smooth
• Includes pad set.
23-0477 1997-07
• Front kit includes brake pads and pins for right and left caliper.
23-0062 23-0828 23-0059 1997-07 • Rear kit has one set of pads and pins.
23-0057 23-0819 23-0063 2008-13 VT No. Fits
23-0937 23-0061 23-0057 2008-13 23-0975 Front
23-0830 23-0064 23-0058 2014-up 23-0976 Rear
Extended
23-0819 23-0060 2008-13
44 WWW.VTWINMFG.COM
Brake Pad
TOURING
Duro Duro Duro Veloprene Dura SBS SBS SBS
Soft Ceramic Semi Sintered Sintered Ceramic Carbon
Metallic Tech
Duro Soft designed to be compatible to all types of brake discs.
Duro Ceramic for general purpose use on carbon steel brake discs.
Duro Semi Metallic durable and have a reputation of excellent heat transfer for all types of brake discs.
Veloprene is relatively soft compound compared to ceramic or metallic but heat resistant and less abrasive to rotors, including
polished stainless types.
Duro Sintered excellent stopping on all types of brake discs
SBS Sintered provides maximum stopping power with stainless steel discs.
SBS Ceramic for general purpose use on carbon steel brake discs
SBS Carbon Tech for use on all stock or aftermarket calipers and work well with stainless steel or cast iron discs.
A C B D E
23-1015 23-0512 23-0996 23-0647 23-0625
23-0960 23-1784 23-1785 23-0998 23-0894
23-0890 23-0526 23-0993 23-0643 23-0546
23-0002
23-0961 23-0001 23-0004 23-0005
Duro SBS
Duro Duro Duro Duro SBS SBS
Fits OEM Semi- Carbon Photo
Soft Ceramic Veloprene Sintered Sintered Ceramic
Metallic Tech
Rear Disc Pad Sets for Stock Type Calipers
1986-99 FLT 43957-86A 23-2282 23-0991 — 23-0627 23-0956 — — 23-1777 A
2000-07 FLT 44082-00 23-0526 23-0993 23-0643 23-0546 23-0958 23-4559 23-1781 23-1782 B
2008-up FLT 41852-08 23-1015 23-0995 23-0894 23-0889 — — — — C
2009-13 Trike 83911-09B — — — 23-0973 23-0980 — — —
2014-up FLHT-
CUTH with shim 41300033 — — — 23-0001 — — — —
and spring
2014-up
41300033 — — — 23-0004 — — — —
FLHTCUTH
2015-up FLHT,
41300027 — — — 23-0002 — — — —
CUTG, FLRT
2015 XG 41300072 — — — 23-0005 — — — —
Front Disc Pad Sets for Stock Type Calipers
1984-99 FLT 44063-83 23-0512 23-0996 23-0647 23-0625 23-0960 23-1784 23-1762 23-1785 D
2000-07 FLT 44082-00 23-0526 23-0993 23-0643 23-0546 23-0961 23-4561 23-4560 23-1782 B
2008-up FLT 41854-08 — 23-0998 23-0894 — 23-0909 — — — E
WWW.VTWINMFG.COM 45
Front Caliper and Rotor
TOURING
Front
23-2226
23-0581
Rear Chain Conversion Kit
• Includes front and rear sprockets with chain.
VT No. Year Front Tooth Rear Tooth
19-0277 1986-99 22 48
19-0281 2000-06 22 48
19-0279 2009-18 22 52
23-1712
23-0906
Front Caliper Set

VT No. Fits
23-2226 1984-99
23-0581 2000-07
23-1712 2008-up
23-9257
23-0900
GMA Billet Aluminum Brake Calipers

• Machined from billet aluminum and clear anodized. Feature
dual pistons which are internally connected, brake pads and
brackets, when provided. Include spacers and hardware nec- 23-0047
essary for installation.
• Hoses and rotors not included.
Front Fits
23-9257 400MDD 2000-07 FLT 4 Piston Dual Disc
Components
23-4509 PA1 Caliper Piston, pair, fits 23-9257
23-1040
Rotor Set
• 2014-up FLT, Stainless.
VT No. Fits Type
23-0906 Mag 5 or 10 Spoke
23-0900 Mag 5 or 10 Spoke
23-0047 Wire 40 Spoke
23-1040 Wire 40 Spoke
46 WWW.VTWINMFG.COM
46 WWW.VTWINMFG.COM
Front Rotor
TOURING
Dura Rotor Russell
11.5" OEM Bolt Kit Fits
Polished Standard Polished Standard
8793-5 Cast
23-0343 23-0334 23-9040 23-0319* 44136-84 1984-91 FLT
8794-10 Wire
23-9040 23-0319* 8793-5 Cast 1992-99-FLT
23-9206 23-0368 44136-92
1984-99 1984-99 8794-10 Wire Cast or Wire Wheel
8793-5 Cast
23-0467 — — — 44136-92 1992-99 FLT
8794-10 Wire
2000-07 FLT
8793-5 Cast
23-0356 23-0379 23-9048 23-9049 44156-00 Cast or Wire Wheel
8794-10 Wire
23-9048 Left Side Brake Rotor
*Note: Stainless
23-1040
Front Brake Rotor for Touring
VT No. Years Finish U/M
23-1040 2008-13 Stainless Set
23-0151 23-0679 23-1517
Wyatt Gatling Polished Spoke Rotor

20 Spoke 18 Spoke Year
23-0149 23-0679 1984-99
23-0151 23-1517 2000-07
23-1000 23-0907
— 23-1529 2008-13
11.8" Front Brake Rotor
• Requires bolt on application, like the original. OEM# 42040-
06. Diameter measures to be 11.8". Must order mount bolts
separately. Fits 2008-13 FLT.
Stainless Steel Polished 23-0033 23-0049
23-1000 23-0907
23-6764 23-6768 23-0034 23-0035

Front Brake Rotor Sets.
VT No. Spoke Year
23-0033 5 1984-99
23-0049 18 1984-99
Brake Rotor 23-0034 18 2000-07
• For years listed.
• Stainless or polished stainless.
23-0035 18 2008-13
• Fits 2008-13 FLT.
VT No. OEM# Side U/M Finish
23-6764 41500022 Left Each Stainless, Polished 23-0694
23-6765 41500022 Left Each Stainless
23-6768 Right Each Stainless, Polished
23-6769 Right Each Stainless
23-1040 Front Dura Brake Rotor
• Vented swirl slots.
Polished
VT No. OEM Type/Side Model
23-0694 44156-00 Front, Left FLT 2000-07
11.8” Polished Replica Brake Rotor Set 23-3774 44136-00 OE Styled FLT 2000-07
• Feature full stainless construction with precision ground fin- Brushed Finish
ish and slot style pattern. Fits 2008-13. Pair. 23-0535 44156-00 Front Left Custom FLT 2000-07
VT No. 23-1040
WWW.VTWINMFG.COM 47
RearStandard
Rotor
TOURING
Polished Stainless Stainless
Replica Brake Rotor

• Feature full stainless construction with precision ground
finish and slot style pattern.
23-0357 23-0354
Dura Rotor Russell
OEM Dia Bolt Kit Fits
REAR
23-0260 23-0354 — — 40939-86A 11.5” 9807-10 1986-99 FLT
9807-10 Wire
23-0357 23-0387 23-9050 23-9051 41797-00 11.5” 2000-07 FLT Cast or Wire
9818-5 Cast
23-0598 — — — 41797-00 11.5" 2000-07 FLT
9807-10 Wire
23-1043 — — — 41797-00 11.5” 2000-07 FLT
9818-5 Cast
23-0978 23-0840
Replica Rear Rotor

• Feature full polished stainless construction with precision
ground finish and slot style pattern.
VT No. Year Finish
23-0978 2008-up AEE Wyatt Gatling Polished Spoke Brake Rotor.
23-0840 2008-up Dura 18 Spoke Type Year
23-0678 Rear 1986-99
23-1518 Rear 2000-07
23-0895 Rear 1986-93
23-1530
1979-85 12" Steel Rear Brake Rotor. 23-1533
Drilled Plain OEM Bolt Kit Fits
23-0297 23-0313 40939-79A 8792-5 1979-85 FLT rear
40939-86A 8847-5 1986-99 FLT
Front Rotor
Hardware Set.
• For one side. Fits 2014-
up FLT. 30 pieces.
VT No. 23-0943 Wyatt Gatling Rotor 11.8"
• Polished
VT No. Item Fits
23-1530 18 Spoke Style 2008-up rear
23-1533 X-Spoke Style 2008-up rear
23-1315
Black Rear Brake Disc for Trike

VT N OEM Fits
23-1314 83425-09B 2009-13 FLHTCUTG (Tri-Glide)
23-1315 41500031 2014-18 FLHTCUTG (Tri-Glide)
48 WWW.VTWINMFG.COM
TOURING
Rear
23-0815 23-1101
Rear Chain Conversion Kit

• Includes front and rear sprockets with chain.
VT No. Year
19-0277 1986-99
19-0281 2000-06
19-0279 2009-18
8792-5 9818-5
23-0365
Chrome Rear Caliper Kits 8847-5 9807-10

VT No. Years
Chrome Rear Brake Disc Bolts
23-0815 2008-up Type Disc Type Years VT No.
23-1101 2002-07
Cast 1980-81 8792-5
22-0365 1986-99, GMA, With stainless steel
Cast 1982-85 8847-5
Cast 1986-91 9632-5
Cast 1992-up 9807-10
FLT Cush Drive Spoke 1997-up 9818-5
Dampener TPV Spoke 1997-up 9818-5T
• Constructed of one piece for easier Chrome Front Disc Brake Disc Bolts
installation, is 25% more stiffer than Cast Dual 1982-85 8847-5
the stock rubber type. Replacement Cast Dual 1980-81 8792-5
for 2009-up Rear Hub Assemblies. Cast Single/Dual 1984-up 8793-5
Replaces 40278-09. Wire Single/Dual 1984-up 8793-5
Chrome Brake Disc Bolts. See listings for applications.
VT No. Material
VT No. Thread
28-2262 Polyurethane 8847-5 ⁷⁄₁₆ x 14 x 1³⁄₄
FLT Cush Drive 8792-5 ⁷⁄₁₆ x 14 x 1¹/₄
9632-5 ³⁄₈ x 16 x 1
Dampener Stock Rubber
8793-5 ⁵⁄₁₆ x 18 x ⁷⁄₈
Type 9807-10 ³⁄₈ x 16 x 1
• Constructed of one piece for easier
9818-5 ³⁄₈ x 16 x 1
installation.
9818-5T ³⁄₈ x 16 x 1
Replacement for 2009-up Rear Hub
Assemblies. Replaces 40278-09.
VT No. Material
28-2261 Stock Rubber Type
8793-5 2925-10
Front Rotor Bolts for FLT

VT No. Year Fits
8793-5 1984-up 5/16 x 18 x 7/8
2925-10 2014-up 8mm x 30 mm
WWW.VTWINMFG.COM 49
Touring Rear Caliper
Caliper
TOURING
23-9055
23-2275 23-0533
23-0987
23-0884
Caliper Seal Kit
• Contains seal and dust boot for year listed.
VT No. OEM Front
23-9038 23-2275 44047-83 1984-99 FLT
23-0533 44315-00 2000-07 FLT
23-0812 — 2008-14 FLT
VT No. OEM Rear
23-0558 — Piston Ring for Above
23-9022 44045-87 1986-99 All FLT
23-0594 — Piston Ring for Above
23-0533 44315-00 2000-07 FLT
23-0988
23-0634 23-0812 — 2008-14 FLT
Chrome Rear Calipers 23-0884 — Seal Kit for V-Twin Billet 4 Piston Caliper
• Completely assembled with piston and seals but less mount
brackets for exact stock replacement. Caliper Mount Bolt Kit
VT No. Fits Item • Mount through caliper to bracket.
23-9055 1986-99 FLT Caliper, chrome
VT No. OEM Type Year
23-9038 1986-99 FLT Caliper, black
23-0140 44039-86 6 Point Rear 1987-99 FLT
23-0634 2002-07 FLT Caliper, chrome
23-0125 44039-86 6 Point Black 1987-99 FLT
23-0987 2008-up FLT Caliper, chrome
44040-80
23-0988 2008-up FLT Bracket, chrome 2855-7 Nut & Bolt Kit 1980-85 FLT
7855W
Rear Caliper Rebuild Kit

• Includes all necessary hardware,
piston and seal kit for a complete cali-
per overhaul. Fits 1987-99 FLT. 23-2279 23-0532 23-1999
VT No. 23-2012
Caliper Piston and Seal Kit
VT No. OEM Front
23-2279 44020-83 1984-99 FLT
23-0532 44313-00 2000-07 FLT
23-2318 2018-13 FLT
VT No. OEM Rear
23-1999 43946-86 1987-99 FLT Includes seal kit
23-0532 44313-00 2000-07 FLT
*Note: 1980-85 FLT have Dual Piston Caliper.
50 WWW.VTWINMFG.COM
Lowering Kit
TOURING
Touring Chassis Component
54-0534
Installed
**Warning: Installing
51-1609
a lowering kit or
shorter shocks will
decrease initial
ground clearance.
The motorcycle
will be lower to the
ground and care
should be taken to
54-0534 avoid bottoming,
Installed especially over
bumps or in turns.
51-1601
Installed 51-1601
51-1602
54-0752 Installed
54-0521
54-0508
The Touring Torque Linkage System

• No modifications are necessary to install this unit. After the
unit is installed it will eliminate the lateral movement while still
allowing the Iso mounted factory design of the “floating” drive
train to move vertically as designed through connecting the rear
54-0534 54-0125
of the transmission case to the frame. The kit utilizes an isola-
tion link with a urethane plunger so there is no contact between
the frame and engine transmission assembly, therefore reduc-
ing vibration.
• 51-1602 includes outer mount bracket in chrome.
VT No. Finish Fits
51-1609 Black FLT 1991-2008 54-0752
51-1601 Black FLT 1993-2008 54-0126
51-1602 Chrome FLT 1993-2008
Note: Installation on 1993-2001 models require 27-1235 foot
peg spacer set as shown. Purchase 27-1235 separately.
50-1222 50-1223
Black Rear Shock Lowering Kits

• Lowers rear frame area.
• Includes instructions, hardware and black brackets.
VT No. Fits Lowers Frame Area
54-0508 1985-1996 FLT, FLHT 11/2”
Chrome Frame Trim Set 54-0521 1997-2001 FLT, FLHT 11/2” (except FLHRCI)
• Attaches by screws 54-0534 2002-2003 FLT, FLHT 11/2”
VT No. Fits
54-0125 2004-08 FLHT, FLHR 1”
50-1222 1997-16 54-0752 2004-up FLT 1”
50-1223 1991-96 54-0126 2004-08 FLHT, FLHR 11/2”
54-0549 2009-up FLHT, FLHR 1”
WWW.VTWINMFG.COM 51
Shock
TOURING
54-0873
54-0020 54-0781
54-0133
AEE Series Shock Sets

• Nitrogen charged with multi stage dampening and adjustable spring
load. All shocks are measured eyelet to eyelet and feature chrome springs
and caps with black body. *Note: Denotes stock length.
Fits 11” 11.5” 13” 13.5” 14.25”
1980-04 FLT 54-0020 54-0021 54-0023* 54-0024 54-0025
1980-05 FLT 54-0133
**Warning: Installing a lowering kit or shorter shocks will

decrease initial ground clearance. The motorcycle will be lower
to the ground and care should be taken to avoid bottoming, 54-0780 54-0874
especially over bumps or in turns.
54-4006 54-4001
54-0782 54-0875
54-4003
Shock Set
• Fits 1980-05 FLT models Shocks
Standard Size • Fit 1995-2016 FL models
Chrome Black Size
54-4006 11.5”
54-0781 54-0873 12.5”
54-4001 12.5”
54-0780 54-0874 13
54-4003 13.5”
54-0782 54-0875 11.5”
52 WWW.VTWINMFG.COM
Shock
TOURING
54-0149
54-0147
54-0148
54-0039 54-0040 54-0041
28-0535
Chrome Low Touring Air Shock
54-0063 54-0064 54-0065 • Lower the seat height without altering the ride.
FLT Replacement Shock Absorbers • Low Touring Shocks have been re-valved for a comfortable
•Nitrogen-charged steel monotube damper bodies with hard ride while lowering the seat height by up to ³⁄₄".
chrome-plated shafts • The air adjustability feature of the stock shocks will be
•Progressively wound springs for a smooth, comfortable ride retained.
•Adjustable spring pre-load
•Mount with existing hardware VT No. Fits
•Available in several lengths to suit most riding styles 54-0149* 2009-16 FLT, FLHT, FLHS, FLHR
•Sold in pairs 54-0147 1997-08 FLT, FLHT, FLHS, FLTR & FLHR
Note: Lowering the motorcycle will reduce ground and cornering 54-0148 1991-96 FLT, FLHT, FLHS, FLTR & FLHR
clearance.
Note: Before purchasing or attempting to install shocks that are 54-0062 2007-up FLT, Valve Assembly
different than the OEM length, confirm that your wheel travel 28-0535 Rear Rubber Boot Set 1997-2012 FLT
can be altered without causing clearance issues such as swing- *Note: Will not fit lower 2009-16 FLHX, FLTRX, FLHTKL,
arm/ axle to exhaust contact, as well as chain/ belt guard or tire FLHTCUL, FLHRSE and FLTRSE.
contact.
Note: OEM upper shock mount covers will not fit with these
shocks.
16-0578 Wyatt Gatling
Black Chrome Size Fits Shock Pump
• Pressure gauge 0-60
54-0063 54-0039 11"
85‑up FLHT/ FLHR/ FLHX/ FLTR PSI. Manually operated.
54-0064 54-0040 12"
(except H‑D FL Trikes) VT No. 16-0578
54-0065 54-0041 13"
16-0041 Shock Pump
• Includes pressure
gauge replaces 54630-
03A from 0-60 PSI.
VT No. 16-0041
16-0002 Digital Shock Pump

• Includes pressure gauge
replaces 54630-03A from
Progressive Suspension 412 Series 0-300 PSI.
Chrome Shocks VT No. 16-0002
• Manufactured from the finest material available.
• Magnum 412 Series shocks are nitrogen charged with six-
stage automatic damping and an adjustable spring preload.
• Available with chrome spring and end caps, shock cartridge is
not chrome.
• All shocks are measured eyelet to center of eyelet.
• Fit 1980-04 FLT, FLHT, FLHS
11” 11.5” 12.5”
54-0093 54-0033 54-2000
WWW.VTWINMFG.COM 53
Charging Systems for Touring
TOURING
32-0775
32-7776
32-7775 32-8943
32-1281
32-0764 32-0835 32-1393 32-1472
32-0836 32-0544
32-0838
32-0837
Alternator Kit for FLT models include rotor, regulator, stator and hardware. Use
32-8926 rotor only with 32-7780 kit, to produce 45 amp output.
22 Amp Single Phase Kits
VT No. Regulator Fits/Note
32-7776 32-0667 1979-98 Exposed Magnet Rotor
32-7500 32-0667 1979-98 Exposed Magnet Rotor Black Regulator 32-1391
32-0776 32-0780 1979-98 Sealed Magnet Rotor Chrome Regulator 50 Amp Three Phase Kits
32-0796 32-0780 1979-98 Sealed Magnet Rotor Chrome Regulator 32-0764 1989-96 With carb on EFI Exposed Magnet Rotor
32 Amp Single Phase Kits 32-0835 1999-03 With carb on EFI Exposed Magnet Rotor
32-0775 32-0781 1979-98 Sealed Magnet Rotor Chrome Regulator 32-1281 1999-03 With carb on EFI Sealed Magnet Rotor
32-0836 2004-05 Exposed Magnet Rotor
32-7807 32-0781 1979-98 Sealed Magnet Rotor Chrome Regulator
32-0837 2006 Exposed Magnet Rotor
32-8927 32-9098 1979-98 Sealed Magnet Rotor Black Regulator 32-0838 2007-08 Exposed Magnet Rotor
32-7775 32-0781 1979-97 Sealed Magnet Rotor Chrome Regulator 32-1278 32-0966 2009-10 Chrome Regulator
38 Amp Single Phase Kits 32-1279 32-0966 2011-13Sealed Magnet Rotor
32-8943 1991-96 With carburetor sealed magnet rotor 32-1391 2011-13 Exposed Magnet
32-7780 32-9154 1995-95 With EFI Exposed Magnet Rotor 32-1392 2014-16Air Cooled
45 Amp Single Phase Kits 32-1393 2014-16 Water Cooled Only

54 Amp Three Phase Kits
1991-96 With Carb Exposed Magnet Rotor Black
32-8744 32-0544 2011-16 Water on Air Cooled
Regulator
1991-96 With Carb Exposed Magnet Rotor Chrome
32-0944 32-1472 2011-13
Regulator
32-0975 1997-98 With carb on EFI Sealed Magnet Rotor 32-1473 2014-16 Air Cooled
32-0871 32-7548 1999-03 With carb on EFI Exposed Magnet Rotor 32-1474 2014-16 Water Cooled
54 WWW.VTWINMFG.COM
Fork
TOURING
24-0085
Chrome Fork Dress Up Kit

6° Raked Triple Tree Set • Includes lower legs, upper fork cover, axle spacer set and
• For FLT models features 6° rake over stock tree set. Allows outer nut covers. All necessary hardware is included for
use of larger diameter wheels while still retaining the use of installation.
stock cowling assembly. VT No. Fits
VT No. Fits 24-1245 FLHR 2000-07, FLT 2000-07, FLHT 2000-07
24-0085 FLT 1997-2013 24-1321 As Above 2008-13
1987-up FLHT Chrome 42-0920 Lower Triple Tree Cover.

• Completely covers underside of
Lower Fork Stem Cover tree.
VT No. OEM
42-0911 66058-01
VT No. Fits
42-0920 FLT 2001-13
24-0212 24-1314
24-2042 24-2043
Billet Lower Leg Cap Replica Chrome Forged Steel Triple Tree Set
• Replaces stock cap. • Includes lower bearing pressed on, dust shield set and upper
VT No. Year Fits bearing and cone nut.
24-2042 1986-99 3/4” Axle VT No. Fits
24-2043 2000-up 1” Axle 24-0212 1984-08 FLT
24-1314 2009-13 FLT
Chrome Lock Cover Fork Tube & Slider Assy
• Fits 1994-up Road King. • Available in right and left pairs, completely
• Cover pivots to allow access to fork lock. assembled.
VT No. 48-0424 • Units have hard chrome fork tubes, and either
polished or chrome lower sliders, with springs
Fork Lock Cover and all internal components installed.
• Fits FLHR 1994-up. • Dual Disc
Chrome Black VT No. Fits MM Finish
42-0133 42-0134 24-0522 1984-99 FLT 41 Chrome
24-9996 1986-99 FLT 41 Polished
24-0538 2000-13 FLT 41 Chrome
24-1730 2014-up FLT 49 Chrome
24-1536 2014-up FLT 49 Chrome
24-1367 2014-up FLT 49 Chrome
24-1765
24-1056 24-1068 Fork Bushing Kit for assembly
Fork Leg Rebuild Kit of 41 mm leg sets.
VT No. MM Fits VT No. 24-1765
24-1068 41 1993-13 FLT Steering Stem Bearing Kit
24-1056 49 2014-up FLT VT No. 24-1750
24-1080 46 2014-up FLT, Bushing Only
WWW.VTWINMFG.COM 55
Fork for FLT-FLHR
TOURING
24-0211
Chrome Fork
Assembly
• Features chrome triple trees,
chrome or polished lower legs,
axle, chrome upper fork cov-
ers and full chrome cowl and 24-0178
handlebar top chrome cover
assembly.
• Units accept dual disc caliper
as required by year.
2000-06 24-0268
24-2223
24-0210
24-2223
24-9999 17-0949
FLT Fork Assembly

• Fits 1984-99 FLT and includes chrome lower sliders with all
internals and stock length tubes installed, chrome triple tree set,
chrome slider covers, axle, bearings and dust covers. Accepts
24-1311 24-1312 24-0313 FLHR cowl set not included. Also accepts 11.5” dual disc com-
Triple Trees for 2009-13 ponents.
VT No. Item Finish VT No. Item
24-1311 Top Chrome 24-9999 Fork Assembly Complete w/Chrome Sliders
52-0856 16” Chrome Wheel
24-1312 Lower Chrome
24-0355 Cowl Assembly
24-0313 Lower Black 24-0268 Top Handlebar Chrome Cover
25-0985 31-0246 Cowl Top Trim Piece
24-0212 24-0522 Right and Left Leg Assembly, Chrome
24-0210 Chrome Upper Tree
24-0211 Chrome Lower Tree
24-0212 Chrome Tree Set
24-9960 Chrome Slider Covers
37-0860 Slider Cover Screws
24-0772 Fork Installation Kit
44-0675 Axle Kit Only
24-1155 17-0949 Nut Lock Tab
Chrome Tree Set 37-1010 Pinch Bolt Set
VT No. Item Year
24-0212 Tree Set 1984-08
Fork Stem Nut Wrench
• Fits FLHR, FLHT.
24-1314 Tree Set 2009-13 VT No. 16-1977
25-0985 Riser Set 1988-13
24-1155 Riser Top 2008-up
Neck Hardware Kit
FLT Top Fork Tube Plugs. • FLT 1980-up
VT No. Year Type • Available separately.
2736-1 1984-01 Top VT No. 24-0367
2737-1 1984-01 Lower
2736-1 2737-1
56 WWW.VTWINMFG.COM
Fork Slider Set
TOURING
24-0389 24-0396 24-0394 24-0398 24-0397
41 mm Lower Fork Slider Set
• Include seals and lower leg cap.
Chrome Black Fits
24-1369 FLT 1986-99
FLT 2000-2013; does NOT include the Fork Tubes
24-0389 FLT-FLHT
lower leg cap
1984-96 FLT, FLHT, FLHR 41mm.
24-0396 24-0398 FLT 2000-13
24-0411 Stock 20⁷⁄₈” Chrome
24-1368* FLT 2014-up Note: Assembly 24-0027 As above Hard Chrome
24-0394 24-0397 FLT 2014-up 1997-13 FLT, FLHT, FLHR, 41mm
24-0395 FLT 2000-2013 24-0045 Stock 20⁷⁄₈”
24-0593 Polished, FLT 1986-1999 24-0053 22⁷⁄₈” Hard Chrome
24-0047 24¹⁄₂” Chrome
24-0048 24¹⁄₂” Hard Chrome
24-1563 24-0056 26⁷⁄₈” Hard Chrome
24-0050 28¹⁄₂” Hard Chrome
2014-up FLT
24-1188 22³⁄₄” Hard Chrome
24-1731 Hard Chrome Tube Assy Only
20th Century Fork Spring Lowering Kit 24-1046 24-1045 24-1079
• Progressively wound springs that resist bottoming out.
• Installation requires minor disassembly to lower the front forks
1¹⁄₂” or 2” depending on the spacer used. Kit includes springs,
spacers and hardware. Easily converts back to stock by rein-
stalling stock fork springs.
VT No. Size Year/Model
24-1563 41 mm 1999-01 FLT, 2006-13 FLT Handlebar Riser Cover
• Fit one piece handlebars that have a rise greater than 12".
VT No. Finish
24-1046 Black, 2003-13
24-1045 Chrome, 2003-13
24-1079 Chrome, 2014-up
41mm Fork Slider Assembly

VT No. Fits Fork Steering Damper Kit
• Attaches to lower fork stem and crash bar
24-1376 2000-2013 FLT, black, replaces OEM# 46546-03
VT No. Fits
2000-2013 FLHT, FLHT, FLHTC, FHTCUI,FLHTCI, 24-1371 FLT 2000-2008
24-1338
FLTRI, black 24-1377 FLT 2009-2013
24-1339 2002-2013 FLHR, 2002-2013 FLHRC, black 24-1372 FLT 2014-up
24-1340 2000-2013 FLT, chrome Fork Slider Assembly
24-1453
Fork Lowering VT No. Finish Fits
Kit. 24-1781 Black 2014-up FLT
• Fits 2014-up FLT with 24-1830 Black 2000-13 FLT, 26 3/4"
49 mm fork tubes.
24-1337 Chrome 2000-13 FLHT, FLHTC, FLHTCUI, FLHTC
VT No. 24-1453
WWW.VTWINMFG.COM 57
Fork Slider Cover
TOURING
24-1166
24-1173
24-1166
24-9960 24-9986
Fork Slider Cover
24-1167 • Fit 1980-2013 FLT model forks.
• Stock length is 6⁵⁄₈” overall.
VT No. Finish Style
24-9960 Chrome Smooth
24-9986 Stainless Smooth
24-1183 24-1159
24-1047 24-1048
24-1169 24-1168
24-1180
24-1192 24-1182
Fork Slider Cover Set
• Fits 2014-up FLT.
Chrome Black Style
24-1165 24-1172 24-1047 24-1048 Fork Slider Cover Set
24-1182 24-1180 Edge Cut w/ milled accents
24-1192 24-1193 Billet Smooth
24-0387 24-1558 Flame
24-0386
24-1752 24-9962
Stock Slider Covers
• Stock length is 6⁵⁄₈” overall.
VT No. Fits Finish
24-1171 24-1170 24-1752 FLT 1980-2013, FLH 1949-1984 Black
24-9962 FLH 1949-1984 Stainless
Fork Slider Cover Sets
• Black and chrome slider cover sets in various styles as noted.
• For FLT 1980-2013
Chrome Black Style
24-1166 24-1173 Grooved
24-1167 Tribal
24-1183 24-1159 Agostinni
24-1169 24-1168 Smoke Stack
24-1165 24-1172 Bellowed
24-0386 Flame
24-1171 24-1170 Tapered w/ Contrast Rings
58 58 WWW.VTWINMFG.COM
WWW.VTWINMFG.COM
Front Wheel
TOURING
1986-99 Front 40 Profile Wheels with chrome
Spoke Wheel spokes, 40 spokes and rim width
• Twirled spokes, chrome rim, of 3.0".
chrome spokes and chrome 16” Front FLT
hub. 52-0898 2009-up w/o ABS
Chrome Rim
Rim Width
Spokes Diameter
52-0859 16" 3.00"
52-0491 52-0440
21” x 3.25” Chrome Front Wheel
VT No. Year Model
52-0440 2005-07 FLT Dual Disc
52-1020 52-2008 52-2060 52-0491 2008 FLT Dual Disc
FLT Front Wheels
Chrome Stainless
Rim Diameter Rim Width
Spokes Spokes
1984-99
52-0856 52-0854 16" 3.00"
52-0021 21" 2.15"
52-0441 21" 3.25" 26” 60 Spoke Front Wheel
52-1020 16" 3.00" • Bearings included. Fits 2000-2007.
52-1033 23" 3.00" VT No. 52-0794
2000-07
52-2008 16" 3.00"
52-0440 21" 3.25"
52-0462 23" 3.00" 52-0465
2008
52-0491 21" 3.25"
52-0465 23" 3.00" 23” x 3.00” Chrome Front Wheel
2009-up without ABS VT No. Year Model
52-1241 16" 3.00" 52-1033 1984-99 FLT
52-0492 21" 3.25" 52-0462 2000-04 FLT
52-0466 23" 3.00" 52-0465 2009-up FLT
2009-up with ABS
52-2060 16" 3.00"
52-2061 21" 3.25" 50 Fat Spoke Radial Laced
Wheel
• Feature ³⁄₈” polished stainless steel
Front Twirled Spoke Wheel spokes, billet chromed hub and polished
• Include chrome hubs with internals, rim chrome steel rim. All wheels include bear-
and twirled chrome spokes assembled. ings, seals and center spacer.
Front Dual Disc
52-0109 16” x 3.5” 2000-04 FLT, FLHT, FLR
VT No. Fits Type Width
52-0859 1984-99 FLT 16” 3.00”
Chrome Front 17" x 3.0" Rim
• 40 spoke holes
• 2009-11 FLT
VT No. 52-0793
Front Spoked Wheel

• Features a 16" x 3.00" chrome rim, a chrome hub with 25mm
bearings and 40 chrome spokes.
VT No. Fits Type Width
52-0898 FLT 2009-up 16” 3.00”
WWW.VTWINMFG.COM 59
Rear Wheel
TOURING
52-0665 52-1240
52-2037 52-0857
Chrome Profile Rear Wheel

• Includes chrome aluminum rim with smooth finish, chrome
hub and chrome spokes. Laced and trued. 52-0976
1986-89 Rim Diameter Rim Width 52-2038
52-1242 16" 3.00"
2000-01 Rim Diameter Rim Width FLT Rear Wheels
Chrome Stainless Rim Rim
52-0667* 16" 3.00"
Spokes Spokes Diameter Width
52-1240 16" 3.00" 1986-99
2002-07 Rim Diameter Rim Width 52-0857 52-0855 16" 3.00"
52-0665 16" 3.00" 2000-01
*Note: OE Wheel 52-0976 16" 3.00"
52-0978 16" 4.00"
52-0858
Rear Twirled Spoke 2002-07
Wheel 52-1099 16" 3.00"
• Includes chrome hubs with inter- 2008 without ABS
nals, rim and twirled chrome spokes
52-2037 52-2038* 16" 3.00"
assembled. 2009-up without ABS
52-1289 16" 3.00"
VT No. Fits Rim Diameter Rim Width 2009-up with ABS
52-0858 1986-99 FLT 16” 3.00” 52-2062 16" 5.00"
52-0976 2000-01 FLT 16” 4.00" *Note: Polished Stainless Steel Spokes.
52-0472 52-0430
Rear 40 Spoke 16 x 5 Rim
• Features a small valve stem hole
42-1014 20-0751 42-0963 • Fits 2009-up
Outer Pulley Covers VT No. Finish
• Fit over pulley and mount with the original five screws. 52-0472 Black
Chrome Glossy Tooth Fits 52-0430 Chrome
42-1014 66 FLT 2007-up
20-0751 70 FLT 2007-2013
42-0963 70 FLT 2004-2006
Belts
23-0441
Big Twin, 1¹⁄₂” Wide

Carlisle BDL # of Teeth Fits
20-0599 20-0375 20-0359
20-4010 20-0441 136 1984-96 FLT-FLHT
Chrome Rear Drive Pulley
20-4018 20-0579 139 1997-03 All FLT VT No. Fits Size Note
Big Twin, 1¹⁄₈” Wide
20-0599 2000-03 1.50” 70 Tooth
20-0668 139 2004-06 FLT
20-0375 2000-03 1.50” 18 Spoke
Big Twin, 1” Wide
20-0359 2004-06 1.125” 5 Spoke
20-4020 137 2007-08 FLT
20-4021 140 2009-up FLT
60 WWW.VTWINMFG.COM
Front Axle
TOURING
44-0399 44-0601
9989-4 44-0115
FLT Axle Adjusters
2035-5
44-0399 1984-96
2036-5 44-0601 1997-01
Chrome Front Axle Spacer Kit Chrome Rear Wheel Spacer Set
VT No. Year
• Include left and right side spacers, washers, and nuts.
44-1977 2002-07
Smooth Grooved Fits 44-1977
2507-5 FLHR, FLT 2008-up 37-0036 37-0380
44-1742 ABS 2008-up
44-0115 FLT 2000-09 Front Fitment
2036-5 2035-5 FLT 2000-07
9989-4 FLHR, FLHRCT 1994-up Big Twin Front Axle Cap Cover Set
• Includes right and left caps with set screws for glide type
Front Chrome Axle Nut forks. Chrome
Cap Set VT No. Year/Model
• For both axle nut and axle head 37-0036 1980-99 FLT
where required. Includes set screws 37-0380 2000-07 FLT-FLHT
and hex key wrench. Each cap has 37-0999 2008-up FLT-FLHT
an internal hex to allow more thick- 44-0794
ness for the set screws thread to
eliminate thread stripping.
• Fits 2000-07 FLT.
VT No. 37-0059
Front Axle Kit
• Axle end and spacers are chrome.
VT No. Years Size
44-0676 2000-01 .750”
44-0673 2002-07 1.0”
44-0675 44-0794 2008-up 25 mm
44-0750 2000-07 25 mm
44-0793 2007-up
44-0673
44-0936 44-0935
Axle Kit
Fits Kit Nut Axle Fork Dia
1984-99 FLT 44-0675 9989-4 44-0208 41 mm .750” 44-0002
44-0001
2000-07 FLT 44-0673 2036-5 44-0359 41 mm 1”
Flush Mount Front Axle Kit
44-0370 44-0371
• A way to dress up your front wheel without the hex nut and lug
sticking out.
• Kit includes two chrome washers and two chrome flat head
VT No. Fits
44-0936 FLT 2008-up
Front Axle Spacers 44-0935 FLT 2000-2007
Chrome Zinc Side Fits 44-0001 FLT 2000-2007
44-0370 44-0371 Left 1995-99 FLT 44-0002 FLT 1984-1999
WWW.VTWINMFG.COM 61
Rear Axle
TOURING
44-0245 44-0247 44-0271

44-0127
44-0245
44-0610
44-0471
44-0715
44-0787
44-0219
Rear Axle Kit
• Include chrome axle, nuts, sleeves and spacers for each application. Nut kit includes axle nuts in chrome. Fits belt drive.
Kit Kit Finish Spacer Axle Chrome Axle Zinc Length OEM Model/Year
44-0245 Chrome 12¹⁄₂ 1986-99 FLT
44-0247 Chrome 2026-5* 44-0219 44-0243 12¹⁄₂ 41110-79A 2000-01 FLT
44-0127 44-0155 12¹⁄₂ 41110-89 2001-07 FLT
44-0241 Chrome 44-0471 44-0152 12¹⁄₂ 41056-02 2002-07 FLT
44-0275** Zinc 44-0787 41056-08 2008 FLT
44-0271 Chrome 44-0715 44-1743 41056-09 2009-up FLT
44-0760 2005-up (Axle Nut Only)
44-0292 Zinc Nut Kit
*Note: Includes nut kit. **Note: Axle is zinc plated.
44-0989 44-0998
44-1742
2150-5 2613-4
44-0999
Replica Rear Bearing Kits Chrome Rear Axle Spacer Kits
• Include inner spacer. • Include left side spacer, two axle adjuster collars and castle
VT No. Year Model Size Note nut.
44-0989 2000-07 FLT 1" Non-ABS VT No. Years
44-0998 2008 FLT 25mm Rear 2150-5 2000-01
44-0999 2009-up FLT 25mm Non-ABS
2613-4 2002-07
44-0865 2009-up FLT 25mm Non-ABS
2508-4 2008-up
44-0750 25mm Front Axle Installation Kit, 41455-08C
44-0866 2009-up FLT 25mm ABS 2008-up with ABS rear brakes on Touring models
44-1742
with a 25mm axle
44-0993
44-0901 44-0902 44-0903
Rear Wheel Bearing Race and Seal Kit
• Includes two of each bearing, race and proper seals.
• Fits cast or wire wheel. Fits 1983-99 FLT.
VT No. 44-0420
12-0390
12-0631 12-0996
Wheel Bearing Only
VT No. OEM Year Size Type U/M
44-0993 9267 2000-01 .750" Non-ABS Pair 44-0425 44-0405
12-0390 9247 2000-07- 1" Non-ABS Pair
12-0631 9276 2008-up 25mm Non-ABS Pair Bearing Kit
12-0996 9252 2008-up 25mm One ABS and Pair • Includes two tapered bearings and two races replacing 9052
One Non-ABS for 1973-99 Big Twin swing arm 1958-85.
44-0900 9252 2008-up 25mm ABS/Non-ABS Each VT No. Item
12-0999 6276B 2008-up 25mm Non-ABS Each 44-0425 4 Piece Kit
44-0901* 21" 25mm ABS/Non-ABS Each 44-0405 Race and Bearing, one pair
44-0902* 23" 25mm ABS/Non-ABS Each 44-0406 Bearing Only, one piece
44-0903* 26" 25mm ABS/Non-ABS Each 44-0407 Race Only, one piece
*Note: Bearings for larger than stock diameter wheels have a greater reinforced
magnetic area that will not set off any engine codes after proper installation.
62 WWW.VTWINMFG.COM
Fender Tip
TOURING
50-1160 50-1161
50-1171
50-0045 50-0046
50-1167 50-1166
50-1162 33-0657 50-1025
50-1169
50-1164 33-0134
50-1168
33-2081 33-2082 33-2083 33-2084
50-1177
50-1176 Front Fender Tip Lamps
LED Bulb Lens Color Fits
50-0045 — Clear 2014-up
50-0046 — Smoke 2014-up
50-1170 50-1171 50-1162 Amber 2000-13
33-0657 50-1025 Amber 1984-13
50-1164 — Amber 1984-13
50-1174 Replacement Parts for 1979-98 Front Tips
33-2081 Amber Lens only
50-1175 50-1179 33-2083 As Above w/Blue Dot
33-0134 Wedge Bulb
Chrome Front Grill Tip

VT No. Fits
42-0720 FLT 1980-08
50-1180 50-1181 33-0656
42-0720
50-1539 33-0657
50-1540 LED Fender Tip Lamp
• Fits 1980-08 FLT models.
• Replaces bulb and lens with LED light
VT No. Type Color
Chrome Rear Fender Tip Lamps 33-0656 Rear Red
Bulb LED Color Fits 33-0657 Front Amber
— 50-1160 Red FLT 2009-up
— 50-1540 Red FLT 2009-up 33-1805
— 50-1539 Smoked FLT 2009-up
— 50-1179 Amber FLT 2009-up
— 50-1180 Smoked FLT 2009-up
— 50-1181 Clear FLT 2009-up
50-1174 50-1175 Amber FLT 1999-08 33-1786
50-1176 50-1177 Smoked FLT 1999-08 Red LED Tri-Bar Rear Fender Light
50-1161 50-1170 Red FLT 1999-08 Upgrade with Smoked Lens
50-1166 50-1167 Amber FLT 1999-08 • Upgrade your fender tip light from a single running light, to a
50-1168 50-1169 Smoked FLT 1999-08 dual running and brake light with this red LED and smoked lens
50-1026 50-1165 Red FLT 1979-95 tri-bar lamp.
Replacement Parts for Rear Tips The three smoked light bands glow red in the running mode,
Red Lens and increase in intensity when the brakes are applied.
33-2082 Only 1979-98
VT No. Year
33-2084 Red Lens with blue dot 1979-98
33-1805 2010-up FLHX, FLTRX
15-0694 Lens Gasket 1979-98
33-0134 Wedge Bulb 1979-98 33-1786 2006-09 FLHX
WWW.VTWINMFG.COM 63
Fender Trim
TOURING
Chrome Fender Trim Strip Set

• For left and right side.
VT No. Item Fits
50-0531 Strip Set FLT 1982-13
37-8784 Tee Bolt Set FLT 1982-up Chrome Front Fender Rail Trim Kit
• Includes six stanchions, two curved rails, and hardware.
VT No. Fits
50-1084 Custom application
28-0701
28-0702 50-0453
Installed
Mud Flap
• Stock type for front and rear fenders on Big Twin
VT No. Style
28-0701 Black Rubber
28-0702 White Rubber 50-1061
Front Fender Lamp Set 31-1346

Amber
• For the right and left side of FL type
2 rail stock front bumpers.
• Fits 1980-1999.
50-1058
VT No.
33-2139 50-0453
Chrome Front Fender Bumper Rail

• Available with or without rubber insert
VT No. Item Fits
50-1061 Rail w/ Insert FLT 1983-up
50-0453 Rail w/o Insert FLT 1983-up
50-1058 Insert FLT 1980-1999
31-1346 Bracket FLT 1980-1999
Chrome Die Cast Fender Tip

• Features Eagle Spirit or a skull design.
Eagle Spirit Skull Fits
50-1659 50-1655 Front
50-1660 50-1656 Rear
50-1094 50-1145
50-1037
Front Bumper
• Original cutter design. Includes parts pictured for mounting to
FLH-FLT front fenders. Fender requires drilling for installation.
VT No. Item 50-1146
50-1037 Complete Kit
37-9024 Chrome Eye Bolt Set V-Design Fender Rail Trim
VT No. Application Fits
50-1094 Front FLT 1980-2013
50-1145 Rear FLT 2009-up
50-1146 Rear FLT 1984-2008
64 WWW.VTWINMFG.COM
Fender
TOURING
50-1545 50-1546
50-1548 50-1549
50-0946 50-0138
50-0945 50-0039

Front Fender Lower Trim
• Fits 2014-up FLH, FLT, FLH
Chrome Black Type
50-0472
50-1545 50-1548 Smooth
Glide Fork Front Fender 50-1546 50-1549 Flame
VT No. OEM Year Type
50-0138 59093-87 1987-99 Replica
50-0945 59093-00 2000-13 Replica
50-0946 Without holes 2000-13 Plain
50-0039 FLHXSE 2010-13 Raw
50-0472 FLH 2014-up Raw
50-1193 FLH-FLHX 2014-up Raw
Chrome Gold
50-1200 Eagle Eagle Chrome Gold
with with Eagle w/ Eagle with Style
Chrome Chrome Black Tip Black Tip
Tip Tip
50-1587 50-1588 50-1589 50-1590 Front
50-1591 50-1592 50-1593 50-1594 Rear
Black Tip
Chrome Tip with
FLT Steel Front Apron-Less Fender Black Skull
w/Chrome Style
• Wraps almost 180° around the front tire for a clean, custom Skull
appearance. 50-1569 50-1570 Front
• Features a low profile cutaway design exposing the wheel 50-1571 50-1572 Rear
from the hub to the rim for maximum visual impact. Pre-drilled
to fit Original Equipment fender mounting bosses, and does
not require additional fender spacers or install kits. Fits 2014- 50-1132
up FLT, FLHT and FLHX OEM No# 58900196.
VT No. 50-1200
50-1133
Fat Kid Steel Front 50-1066
Fenders 50-1220
• Fit 16” wheels on Glide Forks. 50-1221
VT No. Fits
50-0185 1980-13
Chrome Front Fender Lower Trim
51-0048 51-0049 • Available in ribbed, flame or smooth.
• Screw kit included.
Chrome Black Style Fits
Fender Brackets 50-1066 Ribbed FLT 1986-up
• For 2014-up Touring models 50-1132 Flame FLT 1980-2013
• For 21 wheels/ 50-1133 Smooth FLT 1980-up
Chrome Black 50-1220 50-1221 Ribbed FLT 2014-up
51-0048 51-0049 37-1508 Screw Kit
WWW.VTWINMFG.COM 65
Rear Fender
TOURING
50-0715 50-0942
50-0471
50-0717
50-0718
50-0896
50-0718
50-0860
50-1517
FLT Replacement Rear Fenders

VT No. Fits
50-1508 1995-05 50-1190
50-1509 2006-08
50-0715 1999-00
50-0717 1991-08
50-0896 2009-up
50-0718 2009-up, drilled
50-1517 2009-up longer
50-1515 2009-up
31-0096 31-0761 50-1525

50-0558
Fender Adapter Brackets Dresser Style Rear Fender

• Allow installation of narrower Fat Kid (FLST Style) front fend- • Fenders are undrilled.
ers on FLT-FLHT with 16” front wheels. • Fits models with modification.
VT No. Years Finish VT No. Width
50-0558 1980-99 Alloy 50-0942 6.5”
31-0096 1980-99 Chrome Billet 50-0471 7.5”
31-0761 2000-up Chrome 50-0860 8.0”
50-1525 9.0”
66 WWW.VTWINMFG.COM
Rear Engine Bar
TOURING
51-1061
51-0935
51-0850
51-1062
1¹/₄"
O.D.!
51-1057
51-0937
51-1058
51-0851
Rear Engine Bar Set

• Features left & right side with style and tube diameter as noted.
• Bars do not include reflectors
Chrome Black Type Fits
51-1064
51-0935* ⁷⁄₈" FLHT, FLHR, FLHRC 1997-08 51-1064
51-0850** ⁷⁄₈" FLHR 1997-08, FLHT 1997-up
Rear Engine Bar
51-0851 FLHT 1997-up • Available in black or chrome.
51-0937*** 51-1348*** FLT 1997-2013 1¹⁄₄" Buffalo • Includes right and left guards and hardware.
49-0799 Lower Support Set *Note: includes saddlebag supports, right, left guards and
*Note: Not to be used with saddlebag supports. **Note: Top at bars are hardware.**Note: Top of bars are angled downward to provide
angled downward to provide more leg room. Uses stock lower supports more leg room for passenger. Use stock supports.
or VT No. 49-0799 supports. ***Note: Uses lower saddlebag supports Chrome Black Fits
or VT No. 49-0799 supports.
51-1061* 51-1062* FLH 2014-up
51-1057* 51-1058* FLT 2009-2013
51-1063** 51-1064** FLHTR, FLHX, FLHXSE, FLTRXSE,
FLTRSES, FLHRC 2009-2013
FOR ENGINE BARS:
Warning: These Engine/frame bars may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor intend-
ed to provide protection from bodily injury in a collision with an automobile or any other object.
WWW.VTWINMFG.COM 67
Front Engine Bar
TOURING
51-1577 51-0880
51-0878 51-0883
1.5"
51-1345
51-1338 51-1346 51-1347
Front Engine Bar

• Bar complements the traditional Touring style and features 1¹⁄₄”
tubing. Fits M-8 Models!
Chrome Black Fits
51-1577 51-1345 FLT 2009-16
51-0878 51-1346 FLT 1997-08 51-1065
51-0880 51-1347 FLT 1988-96
51-0883 FLT, FLHT, FLHS 1984-87 with air
51-1338 FLT 1.5” O.D. 51-1070
Front Chopped Engine Guard
• Offers a slim, low profile design that retains function while deliv-
ering unique styling.
Black
1¹⁄₄” diameter features a slightly forward sweep that provides
Signal plenty of room around the brake and shift lever.
Chrome Black Fits
51-1065 51-1070 2014-up FLT
51-1072 51-1071 2014-up FLTR
51-0013 51-0014
Engine Bar
• Features built in amber LED lights to work as turn signals.
Chrome Black Fits
51-0013 51-0014 1997-08 FLT
51-0015 51-0016 2009-up FLT 51-2085
51-0986
51-0991
Nerf Bars
• Feature built in foot rest.
• 1¹⁄₄” tubing.
VT No. Fits
51-0871 51-2085 1999-16 FLHT, FLHR, FLHX
51-2086 2017-up M-8
Engine Guard 50-2056

• Features integrated rubber pads for foot rests.
Chrome Black Year Model 50-2057
51-0991 51-0871 1997-08 FLT Engine Bars
51-0986 2009-16 FLT VT No. Fits
28-0852 Rubber Pads 50-2056 1997-16 FLHT, FLHR, 1997-16 FLT
50-2057 1981-96 FLT, FLHT, FLHR
68 WWW.VTWINMFG.COM
Tipped Muffler
TOURING
30-4050
30-4053
30-4044
30-4052
30-4040
30-1289
30-4051
4” Diameter Chrome Muffler Set
• Measure 4” outside diameter with removable tips.
• Fit 1995-16.
Tip Style Chrome Tips Black Tips
30-4054
Medium Tapered — 30-4053
Long Tapered 30-0639 30-4044
Long Type Tapered 30-1413 —
Hollow Point 30-3195 30-3183
Wyatt Gatling Muffler Set
Slash 30-0598 —
• Fits 1995-16 Gun Barrel — 30-4095
VT No. Type Year
Revolver — 30-0613
30-4040 4" OD 1995-16 Billet 30-0629 —
30-4051 Shooter 1995-16
30-4054 Tapered 1995-16
30-1284 2017-up
30-1289 64900690 2017-up
30-0639 30-4044 30-1413 30-3183 30-0598 30-4095
30-0613 30-0629 30-4053 30-0613

Important Note: Some items on this page may be emission-related parts subject to California or other emission control laws. Please see
note for important information regarding emission control regulatory compliance and warranty information.
WWW.VTWINMFG.COM 69
Muffler
TOURING
30-0631
30-0608
Wyatt Gatling Chrome Slash Cut

• Dual slash-cut crossover system includes headers, brackets
and slash down mufflers with removable baffles.
1
Note: Fits models with O2 sensor.
2
Note: Heatshields included.
VT No. Fits
30-06311 FLT 2010-2016 30-0621
30-06211 FLT 2009
30-06091&2 FLT 2007-2008
30-06081&2 FLT 1995-2006
30-0609
48-0126 48-0127 48-0132
48-0131 48-0137 48-0139

30-1573
48-0137
Installed
Big Radius Exhaust Drag Pipe Set

• Feature 2¹⁄₂” full header and muffler heat shield system, slash
cut end caps, removable baffles and mounting hardware.
• By Vance & Hines
VT No. Fits
30-0631 FLT 2010-16
48-0139 30-0621 FLT 2009
Installed 30-1556 FLT 2007-2008
30-1573 FLT 1999-2006
High Temperature Exhaust Wrap

Hot exhaust pipes bothering you? Don’t sweat it, wrap your 30-1643
exhaust pipes in this heat resistant material. Material withstands
continuous heat of about 1200F & 2000F intermittent tempera-
tures.
VT No. Color Size Vance & Hines Radius 2 into 2 Pipe Set.
48-0126 Black 25’ x 2” x ¹⁄₁₆” Super radius brings a deeper richer tone to the custom styled
exhaust and is engineered for today’s larger capacity engine to
48-0127 Tan 25’ x 2” x ¹⁄₁₆”
get solid performance and just the right sound. Features include
48-0137 Light Brown 25’ x 2” deeper tone, full coverage heat shields and available in matte
48-0132 Black 25’ x 1.5mm black.
VT No. 30-1643
48-0131 White 25’ x 1.5mm
48-0251 Silver 25’ x 1.5mm
70 WWW.VTWINMFG.COM
Tipped Exhaust
TOURING
30-3110
30-3387 30-0634 30-3392 30-0600
30-4094 30-0635 30-0753 30-0754 30-3383 30-3382

3.5” Diameter Chrome Muffler Sets
• Fits 1995-2016.
30-0752 30-4055 30-0628
30-0635
30-0596
30-3382
30-0599
Type Chrome Tips Black Tips Muffler Sets with Short Tapered End Caps
Long Tapered 30-3110 30-3387 • Touring style muffler set has a 3.5” outer diameter.
Hollow Point 30-0634 30-3392 • Available with either a chrome or black body
Slash 30-0600 30-4094 • Features removable baffles, welded top mounts, accurate
Six Screw 30-0635 30-0753 inner diameter inlets and formed inlet tubes, with black anod-
ized or chrome end caps. Fits 1995-2016.
Shooter 30-0754 30-3383
Chrome Body End Cap
Highlighted Shooter — 30-3382 30-0596 Black
Long Gun Barrel — 30-0752 30-0599 Chrome
Revolver — 30-4056
Highlighted Revolver — 30-4055
Shark Tail 30-0628 —
3.5”
30-0610
Bullet Muffler Set

• Non-removable baffle has a 3.5” diameter.
VT No. Fits
Wyatt Megaphone Muffler Set for M-8 models.
30-0610 FLT 1995-16 VT No. 30-0939
WWW.VTWINMFG.COM 71
Muffler
TOURING
30-0626
30-1570
30-0597
Slash Down Chrome Muffler Set
• To stock OE brackets and features removable baffles which
can be modified for alternate tuning characteristics.
VT No. Fits 30-1581
30-0626 FLT 2009-16
30-0597 FLT 1995-16 Twin Slash Monster Oval Slip-On Mufflers
• Vance & Hines FLT twin slash cut mufflers feature full cover-
age heat shields for blue proof protection.
VT No. Fits
30-0422 30-1570 FLT 1995-2016
30-1581 FLT, FLHT, FLHR 2009-2010
Wyatt Gatling Wide Oval Chrome Muffler Set

• With built in baffles. Oval shape measures 2¹⁄₂” X 5”. This muf-
fler set has an overall length of 27¹⁄₄”.
VT No. Fits
30-0422 FLT 1995-2016
30-1555
Chrome Bub 7 True Dual Exhaust System

• Includes performance headers, heat shields, and slash cut
mufflers. Chrome Bub 7 dual exhaust system utilizes perfor-
30-1588 mance proven stepped header technology running from 1⁷⁄₈"
Twin Slash Oval Slip-On Muffler Set to 2". Without having the crossover tube you improve your mid-
• Complete your touring model exhaust system with Vance and range and top-end performance.
& Hines oval muffler set. The 4” diameter mufflers add a sub- • Features 2¹⁄₄" 220° full coverage heat shields and 3¹⁄₂"
stantial power increase and crisper throttle response. diameter mufflers with adjustable slash cut ends. Slash can be
VT No. Fits fixed in the upward or downward position.
30-1588 FLT 1995-2016 VT No. Fits
30-1555 1995-2016 FLHT, FLHTC, FLHX, FLHR, FLTR
32" Muffler Set

• Features a chrome 29" body and 3" black tapered end tips
with a 4-1/2" outer diameter.
VT No. 30-1653
VT No. Fits
30-1653 Fits 2017-up FL.
72 WWW.VTWINMFG.COM
Single Piece Muffler
TOURING
30-3380
4”
30-0214
4" Wyatt Gatling • Fits 1995-2016

VT No. Type
30-0932 Megaphone with Chrome Tip
Wyatt Gatling Fishtail Muffler Set
30-1303 • Fit the existing clamps and hangers.

• Muffler set features 4” waffle type baffle.
VT No. Fits O.D. Length Style Finish
30-3380 FLT, FLHT 1995-16 3 31” Fishtail Chrome
30-1309 FLT 1995-16 2.5” Fishtail Chrome
30-1391 FLT 2017-up 3” Fishtail Black
30-0214 FLT 1985-94 2” 31” Fishtail Chrome
30-1303 30-1606 FLT 2017-up 3” Fishtail Chrome
Wyatt Gatling Reverse Cone Vortex Type

• Fits 1995-2016.
VT No. Item
30-1305 Chrome with black cap
30-3384
30-1303 Black with chrome cap
30-1605
Wyatt Gatling Tapered Muffler Set
• Fits 1995-2016.
VT No. Item
30-1750
30-1603 Chrome with black end cap
Turnout Muffler Set
30-1605 Black with chrome end cap
• For Touring
VT No. Year O.D. Length
30-3384 1995-16 3" 31"
30-1750 2017-up 4" 33"
3”
30-3184
Short Tapered Tip Chrome Muffler Set

• 3” diameter.
• Features chrome short tapered style end tips. 30-1750
• Baffles are 2.5” and are removable. Installed
VT No. Fits
30-3184 FLT 1995-16
WWW.VTWINMFG.COM 73
Muffler Set
TOURING
29-0045
29-0045
30-0847
29-0044
Dualie Straight Pipe Set

• Fits 1995-2016 FLT.
• 2 pipes on each side, hot rod style, with baffles.
• Ends are 2¹⁄₈”.
VT No. 30-0847
29-0047
31-0598 30-0741 31-2136

Muffler Clamp and Bracket Set FLT 2 into 1 Exhaust Header Set
• Hardware for various types of muffler fitments. • Features Lake Style 3" Big Diameter turn out ends that are
• Sold as a pair baffled, full coverage chrome heat shields and 1-3/4" header
tubes.
VT No. Item Fits
• Includes both 12mm and 18mm O2 sensor bungs and sensor
31-0598 Hanger Bracket Set FLT 1985-16
bung plugs for both bungs.
30-0741 4" Muffler Bracket Cover Set FLT 1986-16
Available in black or chrome. Black sets include black headers
31-2136 End Clamp Set Custom application
and black heatshields, chrome sets are available with black
Rubber Insulator Set headers and chrome heatshields or chrome headers with
• OEM# 65724-85. chrome heatshields.
• Fits 1985-up FLT. Turn out end is clamped on and will allow the installer to rotate
VT No. 28-0424 into the desired position. NOTE: Maximize your motorcycles
performance and efficiency be complementing your new Wyatt
Chrome 3¹⁄₄" Muffler Gatling exhaust system with a fuel tuner management system
Body Clamp Set and/or EFI remapping. Remapping is suggested to optimize
• Fits 1995-16 FLT. performance while reducing the possibility of damage to your
VT No. 31-1560 motor or new exhaust system.
Chrome Chrome Black Fits
Replica Chrome Muf- Heatshield Heatshield Heatshield
fler End Clamp Set and Chrome and and Black
• A replica replacement. Header Black Header Header
• Fit 1985-94.
29-0045 29-0044 29-0047 2007-16
VT No. 31-0450
74 WWW.VTWINMFG.COM
Pipe Extension
TOURING
30-0243
30-3251
30-0427 Installed
30-0805
30-0427
30-0972 Installed
30-0971
Bronx Straight Exhaust Extensions

• Sold as a pair. Fit 1995-16 FLT
VT No. Length
30-0971
30-0805 33"
30-0971 36"
30-0950
31-0280
30-0960
36" Universal Fishtail Extension Set
• Features a straight cut end.
FLT Straight Fishtail Kits • Set has an outer diameter of 1⁷⁄₈” to fit over 1³⁄₄” pipes. The
• Kits include pair of straight pipes and brackets. straight thru design lets your engine breathe and has a great
Chrome Black Length Fits/Note sound. Sold in a quantity of 2.
• Order baffle rings, clamps & mounting hardware separately.
30-0243 29” 1985-94
VT No. Finish
30-3251* 30” 1995-16
30-1432 30-1436 32” 1995-16 30-0950 Chrome
30-0389 30-3029 33” 1995-16 30-0959 Black
30-0386 33” 1995-16 31-0280 Chrome Brackets for 1995-16 FLT
30-0449 36” 1995-16
30-0437 30-3028 36” 1995-16
30-0971 36” 1995-16 Bronx End
30-0958 30-0960 36” 2017-up
30-0972 30-0973 33” 2017-up
30-3028
WWW.VTWINMFG.COM 75
Pipe Extension
TOURING
30-0389
30-0783
30-0781
30-0386
Note:
Scalloped
End!
30-0437
30-3029
FLT Straight Fishtail Pipe Extension Kits

• Kits include pair of straight pipes and brackets.
• No baffles with scalloped ends.
Chrome Black Length Fits/Note
30-0781 30-0783 32” 1995-16
30-1610 33” 1995-16 30-0437 Installed
30-3029 33” 1995-16
30-0816 33” 1995-16
30-0457 36” 1995-16
30-3027 36” 1995-16 Diamond Shaped
30-3028 36” 1995-16
30-3027
30-0601
30-3028
Note: Straight fishtail extensions do not have baffles and are
illegal in all states for highway use.
30-0605 30-0845
Custom Muffler Cap Set 30-0442
• Chrome or black finished end caps fit stock mufflers, mea-
sured by muffler outside diameter.
For 3¹⁄₂" Diameter
Straight Exhaust Extension Set
30-0601 Chrome Slash • Fits 1995-2016 FLT.
For 4" Diameter VT No. Style Length
30-0605 Chrome Slash 30-0442 Batique 36”
30-0845 Black and Silver Revolver 30-1432 Flame 36”
note on for important information regarding emission control regulatory compliance and warranty information.
76 WWW.VTWINMFG.COM
For M-8 models
TOURING
30-0958 installed on 2017 Milwaukee 8 model. 30-0940 Installed
30-0933
Wyatt Gatling Tru-Dual Head Pipe Set

30-0973 • Includes independent exhaust pipes for both cylinders,
chrome full length heat shields and allows the use of 1³⁄₄”
mufflers. Features12mm oxygen sensor bungs.
VT No. Year Type
30-0933 2017-up Header Only
30-0973
30-0940 2017-up Header with Fishtail Kit
31-1737 Clamp
Straight Fishtail Extension Set

• Direct bolt on for Milwaukee-Eight 2017-up Touring model.
• Both extensions are straight through without any type of baffles 30-1750
not for legal use in any state or highway.
Turnout Muffler Set
Chrome Black Length • For Touring
30-0958 30-0960 36” VT No. Year O.D. Length
30-0972 30-0973 33”
30-1750 2017-up 4" 33"
31-1069
Individual Header Pipe Components

• Clamp and bracket set, as well as specific pipe sections.
VT No. Item Fits Wyatt Gatling Fishtail Muffler Set
31-1069 Exhaust Clamp & Bracket Set FLT 1995-2008
30-0637 Front Exhaust Header Pipe FLT, FLHT 2010-13 • Fit the existing clamps and hangers.
30-0615 Front Exhaust Header Pipe Custom application • Muffler set features 4” waffle type baffle.
30-0614 Rear Exhaust Header Pipe FLT 2009-2013 VT No. Fits O.D. Style Finish
30-1606 FLT 2017-up 3” Fishtail Chrome
WWW.VTWINMFG.COM 77
Crossover Exhaust
TOURING
29-0077 29-0077 Installed
30-0307
30-0951
Chrome Dual Crossover Exhaust Pipes
• Features intersection of left side crossover at rear pipe for
Touring models. Pipes are 1³⁄₄” outer diameter.
Wyatt Gatling Tru-Dual Head Pipe Set VT No. Fits
• Includes independent exhaust pipes for both cylinders, 29-1163 FLT 1985-1994
chrome full length heat shields and allows the use of OE style
mufflers. Has 12mm oxygen sensor bungs.
VT No. Fits Item
29-0077 Header Set
29-0079
30-0951 2007-16 FLT Header Set w/33” straight fishtails,
30-0349
Independent Dresser Dual Exhaust Set

• Includes independent exhaust pipes for both cylinders, chrome
full length heat shields and allows the use of OE style mufflers.
• By Vance & Hines.
VT No. Fits
30-0349 Installed 29-0079 FLT 1995-2008
30-0435
30-1652
30-0352
Chrome Dumper Straight Exhaust Pipe Set

• 2³⁄₈” outside diameter by 28” long, includes removable baffles.
• Pipe set has an original style channel hanging bracket. 30-1377
VT No. Fits
4.5" Muffler Set
30-0349 FLT 1995-2016
Black Chrome
30-0435 FLT 1985-1994 Year/Model
Tip Tip
30-0352 FLT 1985-1994 30-1377 30-1652 2017-up
78 WWW.VTWINMFG.COM
Dual Muffler Set
TOURING
30-0585
29-1158
30-0581
29-1156
Chrome Crossover Exhaust Header Pipes

• Steel and include heats shields and brackets. 30-0585
includes oxygen sensor.
VT No. Fits
30-0585 FLT, FLHT, FLHR, FLTR 2007-2008
30-0426
30-0581 FLT, FLHT, FLHR, FLTR 1995-2006
30-0632
Chrome 2 into 1 Exhaust Header

VT No. Fits
32-1315 29-1158 FLT, FLHT, FLHS, FLHR 1996-2006
29-1156 FLT 1985-1999
Heat Shields for Above
30-0426 FLT 1991-2006
29-1198
30-0612
30-0328
Chrome Crossover Exhaust Header Pipes
• Use original heat shields and clamps.
VT No. Fits
30-0632 FLT 2010-16
30-0612 FLT 2009 29-1167
Oxygen Sensor Harness for Above
32-1315 FLH 2009
Jims Oxygen Sensor Wrench
• For removing and installing the 4
Chrome True Dual Exhaust Pipes
• Features independent exhaust pipes.
wire heated oxygen sensors. These VT No. Fits
sensors must be torqued to 14 ft-lbs.
Lending to the design of this tool 29-1198 FLT 1999-2006
to be used with a ³/₈” drive torque 29-1167 FLT 1995-2006
wrench. Heat Shields for Above
• Fits 2010-16 FLT. 30-0328 FLT 1985-2006
VT No. 16-0382
WWW.VTWINMFG.COM 79
Complete Pipe & Muffler Set
TOURING
30-3157
29-0081
Chrome Slash Cut Exhaust Drag Pipe Set Vance & Hines Independent Chrome Dual
• Slash cut ends and include mounting hardware. Exhaust Header
VT No. Fits • Full length 2¹⁄₈” heat shields.
30-3157 FLT 2007-09 VT No. Fits
FLT 1995-2008
Shovelhead Pipes for FLT 29-0079
29-1109
True Dual Chrome Exhaust Systems 30-0351

• By Paughco
• Feature a single pipe for each side. Each pipe is independent,
Open Core Baffle Set.
rear pipe for the left and front pipe for the right without inter- VT No. Tube I.D.
section. Pipes have a 1³⁄₄” outside diameter. Order heat shield 30-0351 2¹⁄₄”
set separately. Does not include hardware. Uses 1³⁄₄” slip on 30-1434 2”
mufflers
VT No. Fits Shield Set
29-1109 1980-83 Shovelhead FLT 30-0316 30-0050
Baffle Ring Set

• Set is for exhaust pipe set with a 2¹⁄₄” outside diameter.
• Creates back pressure.
VT No. 30-0050
Chrome Drag Pipe with Slash Cut End.
• Fits FLT 1980-1984 FLT.
• Includes mounting hardware for Shovelhead models.
VT No. 30-3208
37-0977 31-2132 31-1250
29-1162
31-3979
Chrome Dual Pipe Crossover System less Hardware for Exhaust Pipes.
Mufflers • All hardware is chrome finished
• Feature intersection of left cross over at rear pipe, 1³⁄₄” O.D. VT No. Item Fits
VT No. Year/Model
31-1250 Mount Bracket FLT 1986-2016
29-1162 1980-83 FLT
37-0977 2³⁄₈” Pipe Bolt and Spacer Kit FLT 1985-2016
31-2132 1³⁄₄”Pipe Clamp Set Custom application
Stainless Steel Tie Wraps 31-3979 3” Muffler Body Clamp Set Chrome
• For securing exhaust wrap to pipes.
VT No. Length Qty. 48-0157
48-0125 14" 4
48-0157 11¹³⁄₁₆" 300 mm x 7.9 mm x .25mm 10 48-0125
80 WWW.VTWINMFG.COM
Muffler Set Muffler Component
TOURING
30-0423
30-0763
Exhaust Oxygen Sensor Plugs

• If you are doing away with your oxygen sensor, use this-
threaded plug in its place.
VT No. Fits
30-0423 FLT 2004-09 18mm
30-0448 FLT 2010-16 12mm
32-6578
30-0588
Oxygen Sensor Reducer Plug Set
• Allow the use of late type 12mm sensors in earlier exhaust
pipes with 18mm sensor bungs.
VT No. Fits
32-6578 Custom application
Chrome Tru Dual Oval Crossover Exhaust
Header System
• With oxygen sensor ports.
• Includes crossover kit with clamps.
VT No. Fits
30-0764 FLT 2009 Oxygen Sensor Bung
30-0763 FLT 2007-2008 • Features a zinc plated 18mm threaded fitting that accepts
30-0588 FLT, FLHT, FLHR, FLTR 1995-2006 12mm oxygen sensors.
• Bungs can be installed in any exhaust pipe to allow the use
of oxygen sensors.
• Recommended to drill a hole in the exhaust pipe where the
nut can be easily installed. To enlarge a small hole, use point-
ed harbor freight uni-bit.
VT No. 30-0494
30-1578
Vance & Hines Exhaust Drag Pipe Set

• Include pipes, heat shields, caps, baffles and hardware.
VT No. Fits 16-1131 16-1132
30-1578 FLT 2010-2016
Oxygen Sensor Removal Tool
• Easily removes or installs sensors on fuel injected models.
Fits FLT 2006-16
VT No. Application
Oxygen Sensor Sealing Washer 16-1131 7/8" wrench or 3/8" drive
VT No. Year MM 16-1132 3/8" drive for 12mm sensors
15-0081 2006-11 18
15-0012 2011-up 12
16-1385
Oxygen Sensor Plug Thread Chaser Tool

• Used to repair damaged sensor threaded bungs in exhaust pipes.
VT No. Size Fits
Wyatt Gatling Muffler Set with Tapered Tips
VT No. 29-0050 16-1385 18mm FLT 2007-2009
WWW.VTWINMFG.COM 81
Heatshield
TOURING
30-3241
30-0244
30-1763 30-1765
30-1766
Chrome Exhaust Heat Shield
VT No. Size
30-1763 4”
30-1764 6” 30-0215
30-3242
30-1765 12” Chrome Stock Heat Shields
30-1766 18” • Fit stock header pipes.
30-3371 30-3241 Rear FLT 1983-1997
Installed 30-0244 Lower FLT 1981-1991
30-3242 Lower Right Side FLT 1992-2016
30-0215 Front FLT 1981-1988
Chrome Extended Front Heat Shield

• Covers exposed exhaust pipe adjacent to rider footboard.
Uses stock mounting hardware.
VT No. Fits
30-3371 FLT 2000-08
30-0109 30-0106 30-0118
Chrome Universal Heat Shields
• Mounting clamps included.
Chrome Black Dia. Length
30-0109 Perforated 9”
30-0120 30-0474 30-0121
30-0106 Smooth 1³⁄₄” 7”
Flame
30-0118 1³⁄₄” 8”
30-0117 1³⁄₄” 11”
30-0122 30-0481 30-0483 1³⁄₄” 9”
30-0124
Chrome Universal Heat Shields 30-0482 30-0484 1³⁄₄” 12”
• Mounting clamps included. 30-0473 30-0479 2¹⁄₄” 9”
For 2¹⁄₄” Pipes 30-0478 30-0480 2¹⁄₄” 12”
30-0120 4"
30-0474 6"
30-0121 10"
For 1³⁄₄” Pipes
30-0122 10"
30-0124 18"
30-0321 30-0362 30-0365
30-0221 30-0245
Chrome Replica Heat Shields 30-0256
• Fit 1³⁄₄” to 2¹⁄₄” exhaust pipes. Chrome Heat Shield
For custom application • Available with grooved or flame pattern. Made from aluminum,
VT No. Length mounting clamps included.
30-0221 5¹⁄₂" For custom application
30-0245 9" 4” 6” Style
30-0321 30-0362 Grooved
— 30-0365 Flame
30-0256 30-0256 Clamp Set
82 WWW.VTWINMFG.COM
Air Cleaner
TOURING
34-1672
Wyatt Exposed Filter

• Offers enhanced air flow. Backing plate promotes smooth air
flow into carb/throttle body. Built in internal crankcase breathers.
All mounting hardware included. Round High Flow Air Cleaner Kit
• With 1.734 spacer • Fits 2017-up FLHR, FLHT, FLHX, FLTR
• For 2008-16 FLT and FL Trike, 2016-17 FXDLS, 2016-17 FXFB 2018-up FXFB. FXBB. FXLR, FXFBS, FXBR
FLST, 2014-15 FLSTNSE, 2013-14 FXBSE and 2011-12 VT No. 34-1466
FLSTSE
Chrome Black
34-1672 34-1673
With 1.514 spacer
For 2001-15 FLST, 2004-17 FXD (except FXDLS), 2002-07
FLT w/Delphi EFI, 1993-06 Big Twins
34-1711 34-1712
Cyclone High Flow Replacement Air Filter

• For round air cleaners. Designed to increase acceleration
Sweeper Air Cleaner Assembly and horsepower with optimum air flow. Air filter is washable
and reuseable. OEM# 29400358.
• Includes the filter and back plate for Keihin and CV carbure-
• Fits 2017-up FLT, FLHXXX.
tors, and also EFI.
VT No. 34-0626
VT No. Fits
34-2123 FLT 1993-2007 Except 1995-2001 EFI 34-0822
34-0455 Installed
34-0455
Installed
34-0822
High Flow Air Sweep Cleaner Kit
• Includes a low restriction filter.
• Backing plate kit includes air cleaner element, gasket, and
mounting hardware.
VT No. Item Fits
34-0668 34-0668 34-0822 Air Cleaner Kit, FLT 1993-2007
Installed
34-0948 Air Filter Replacement for Stage 1 kits
34-1182 Replacement studs for velocity air cleaner
Chrome Air Filter Assemblies
• For CV Carburetors. Bracket not included. Air cleaners in- 34-0400 34-0401
clude alloy backing plate.
VT No. Item
34-0668 Sweeper
34-0455 Scoop
34-0444
Chrome Oval Air Cleaner Cover
• Steel oval air cleaner cover has a chrome finish.
• Insert also available.
34-0400 EFI FLT 2000-2007
34-0401 Carburetor FLT 2000-2007
34-0444 Insert for above FLT 2000-2006
WWW.VTWINMFG.COM 83
Air Cleaner
TOURING
34-1742 34-1113
Chrome Swiss Cheese Air Cleaner Kit

• Features a chrome finish. Kit includes chrome swiss cheese
style cover with black mesh, high flow tapered filter, cover 34-0655
adapter and mounting hardware.
VT No. Fits
34-1742 FLT 1993-2007
Swiss Cheese Mesh Air Cleaner Cover Only
• Chrome plated cover is for use with 34-0948 tapered type
high flow air cleaner filter. Includes features a chrome finish. Kit From Sifton
includes chrome swiss cheese style cover with black mesh, high Air Power Air Cleaner Kit
flow tapered filter, cover adapter and mounting hardware. • Includes die cast backing plate, filter, and breather canister.
VT No. Fits VT No. Item Fits
34-0276 FLT 1993-2007 34-1113 Air Cleaner Kit FLT 1993-2007
34-0655 Teardrop Cover FLT 1990-2006
34-2124 Installed 34-2124
34-2122
Tear Drop Air Cleaner Assembly
• Features high flow element with billet mount bracket and plate.
• Includes hardware to mount on Evolution & Twin Cam models. Air Cleaner
VT No. Fits VT No. Item
34-2124 Stage 1 Air Cleaner Kit, 2002-07
34-0672 FLT 1993-2007
34-2122 High Flow Kit EFI 2008-2016
34-2127 90° Filter Assembly
34-0700
Velo High Flow Air Cleaner Assembly 34-0483 34-0484
• Features a cast mount bracket with built-in breather and filter. Air Cleaner Assemblies
• Includes breather bolts and hardware to mount to 1992-05 • Include breather bracket and related hardware. Fits 1993-07.
Evolution and Twin Cam VT No. Item
VT No. Fits
34-0483 Chrome Scoop Cover
34-0700 S&S FLT 1992-2005 34-0484 Chrome Sweeper Cover
34-1163 CV Air Cleaner Backing Plate
84 WWW.VTWINMFG.COM
Air Cleaner
TOURING
34-0555 34-0905
34-0566 Installed on
From Wyatt Gatling
34-0940
34-0941 7” Eagle Spirit Round Air Cleaner
VT No. Fits
From Sifton 34-0555 FLT 1990-92
Performance Air Cleaner Kit 34-0905 Replacement filter
• Includes element, and backing plate.
VT No. Fits
34-1255
34-0941 Full Kit FLT 1999-07
34-0944* Filter Kit FLT 1999-07
34-0940* Filter Kit FLT 1992-99
34-1390 Backing Plate FLT 1999-07
*Note: Does not includes cover
Cycovator Hi-flow Air Cleaner Kit

• Includes filter element, backing plate, integral bracket,
breather bolts, gaskets, and hardware
34-1289 34-1290 VT No. Item Fits
Sifton Air Cleaner Kit 34-1255 Full Kit FLT 1992-07
• Includes a hi-flow “cycovator” filter with an integral metal 34-0098 Breather Bolts FLT 1992-16 Except 1995-01 EFI
backing plate for a direct bolt on application to carburetor and
EFI models.
VT No. Fits
34-1289 FLT 2008-up
34-1290 FLT 1993-07
34-0807
Installed
Chrome Air Scoop

• Mounts on left side top motor mount studs. Air scoop offers
improved cooling and acts as a horn cover.
VT No. Fits
42-1010 FLT 1991-16
34-0809
Installed
Velo Dish Air Cleaners
• Chrome dish and full flow filter with bracket that has integral
breather passages and hardware.
VT No. Size Fits 34-0475
34-0809 6" FLT 1991-07
34-0807 8" FLT 1993-07
Oval Air Cleaner Assembly
• For CV carburetors includes chrome cover, filter element,
34-0533 Cover Only for 34-0807 FLT 1993-07 backing plate, and two cover screws.
• Screws for mounting to carburetor are not included.
VT No. Fits
34-0475 FLT 1993-07
34-1350 FLT 1990-07, Backing Plate
WWW.VTWINMFG.COM 85
Air Cleaner
TOURING
34-1601 34-1602 34-1603 34-1618 34-1620 34-1621
34-1604 34-1606 34-1622 34-1625 34-1607

34-1605
34-1608 34-1624 34-1361

34-1611
34-1365
Wyatt Gatling Air Cleaner Assemblies

• Include integral breather system with bracket, mounting kit
34-1612 and air cleaner.
• Includes air filter element.
DIY easy install bolt-on assembly has no hoses to connect!
BT Assemblies fit 1993-2007 FLT
*Note: Fits 1990-92 FLT
Assembly Air Cleaner Shape Style

34-1601 34-0406 Round Black, 7”
34-1602 34-0764 Oval Black, Mesh
34-1603 34-0746 Oval Chrome, Mesh
34-1604 34-1206 Diamond Billet
34-1605 34-1373 Round Chrome, 7”
34-1606 34-0475 Oval Chrome
34-0067
34-1607 34-0742 Round Black, Mesh
34-1608 34-0732 Round Chrome, Mesh
34-1609 Velocity Stack Chrome
34-1611 34-0762 Round Chrome, Drilled
34-1612 34-0763 Round Chrome, Baby Moon
34-1613 34-1374 Oval Chrome, Late Style
34-1614 34-0628 Teardrop Chrome, Maltese
34-1618 34-1742 Round Chrome, Hole Pattern
Breather
34-1619* 34-1081** Chrome
Snoot
34-1620 34-1022 Teardrop Chrome, Smooth
34-0080 34-0081 34-1621 34-0530 Teardrop Chrome, Finner
Heavy Breather Air Cleaner. 34-1622 34-0511 Teardrop Chrome, Flame
Chrome Black OEM Fits 34-1624 34-0629 Teardrop Chrome, Skull
34-0067 34-0068 28716-10A 2008-16 FLT 34-1625 Teardrop Chrome, Live to Ride
34-0080 34-0081 29099-08 2008-17 FLST, FXST, FXD 34-1361 V-Charger Chrome, Flame
34-0082 34-0083 29264-08 2008-up XL 34-1365 34-1334 Inverted
**Note: Does not include filter element
86 WWW.VTWINMFG.COM
Carb
TOURING
34-0467 34-0596
34-1241 35-0990 35-0987

34-0638
40mm CV Carburetors.
• Fit 1986-07 FLT cable operated
VT No. Item
35-0707 Carb Alloy
35-0990 Carb, Black
35-0969 Carb Kit
35-0987 Carb Only
34-0640 34-0620 35-8025 35-8029 35-8032
Chrome V-Charger Air Cleaner

• Features scoop “blower” design and includes a built-in chrome
screen and filter element.
• Kits include bracket and/or integral bracket, and breather
system. Air filter measures 2” wide, 4” inner diameter, and 5⁵⁄₁₆” Chrome CV Carburetor Top
outer diameter. Replaces black plastic cover on 1990-up Big Twin models.
Full Kits with chrome air cleaner VT No. Type
VT No. Style Fits 35-8025 Smooth
34-0467 Raised Bevel FLT 1984-1991
35-8029 Eagle Spirit
34-0596 Smooth Bevel FLT 1993-2007
35-8032 Ball Mill
34-1241 Raised Bevel FLT 1999-2006 with Carburetor,
FLT 2002-2007 with EFI
Air Cleaner Assemblies Only. Order mounting bracket

separately.
Chrome Style Fits
34-0638 Raised Bevel FLT 1990-2007
34-0640 Flame FLT 1990-2007
34-0087 Replacement Cover Only for 34-0638
Velo Air Cleaner Backing Plate Kit

• Includes one piece alloy backing plate, washable element,
stainless steel breather kit with fittings, chrome breather filter
and mounting hardware. Order cover separately.
VT No. Cover Size Fits
34-1105 7" FLT 1993-2007
34-1076 8" FLT 1993-2007
WWW.VTWINMFG.COM 87
Air Cleaner Adapter
TOURING
Sifton
34-1519
Carburetor
Bracket
No Hoses
Needed!
35-0122 35-0125
Crankcase Breather and Bracket Kit
• Allows installation of aftermarket CV type air cleaner on mod-
els with CV carb or EFI system.
• Includes bracket, filter, hose and mounting hardware. 34-0661 34-0713
VT No. Fits
35-0122 1993-98 FLT
35-0125 1999-07 FLT
35-0698 2008-up FLT
40-0350 Filter for Above 34-1369 34-0792
Air Cleaner Adapters
• Mount any CV carburetor air cleaner to performance aftermar-
ket carburetor kits.
• Simply order any CV air cleaner and appropriate adapter
34-1326 34-1327 flange for bolt on installation.
Air Cleaner Adapters • Allow crankcase to breathe back into the carb on throttle body
• Allow installation of Dragton II air cleaner to models listed. so no external hoses are required.
• Plain machine finish. • For use on 1993-98 Evolution and 1999-up Twin Cam models.
VT No. Fits Allow use of CV on S&S “E” bolt pattern air cleaners or velocity
34-1326 2008-14 FLHT, FLHX, FLR FLTR and FL Trike stacks to be installed on models list
2001-14 w/Delphi EFI except 2008-14 Dressers 1993-07 FLT w/carb or EFI
34-1327
and FL Trike
34-0661
1993-07 FLT with carb or EFI or S&S "E" type air clean-
ers or velocity stack to be installed in horizontal or verti-
cal position.
34-1519 1993-07 includes Evo & TC bolts
34-0713 1999-07 includes TC breather bolts only
1999-07 FLT with carb or EFI. Allows the installation of
CV type air cleaners
34-0705
2008-2016 FLT with 50 mm throttle body.
34-1369 Mounting Bracket
Replacement Bolts for Above Brackets.
35-0792 Bolt Set TC-88
88 WWW.VTWINMFG.COM
Air Cleaner
TOURING
34-0566 34-1064 34-0548
Round Air Cleaner Covers
• Feature embossed designs and center screw mounting. For
CV type carburetors with stock backing plate.
VT No. Diameter Style Fits
34-0566 7" Smooth FLT 1999-2007
34-1064 8" American Motorcycle FLT 1990-1999
34-0548 8" Smooth FLT 1990-1992
34-1428
34-1044
34-1053
34-0947
8” Round Air Cleaner Assemblies
• Filter element, backing plate, and cover included.
VT No. Style Fits
34-0407 Smooth Black FL 1993-2007
34-1053 V Logo Chrome FLT 1990-2007
34-0947 Smooth Chrome FLT 1990-2007
34-0115 34-1369
Backing Plate
VT No. Fits Mfg.
34-1428 FLT 2008-2016 EFI Steel
Air Filter Upgrade Kit
• Includes washable filter and studs. 34-1044 FLT 1993-07 CV Steel
VT No. Fits 34-1369 FLT 2008-2016 TC models Die Cast
34-0115 FLT 1999-2016
34-2122 34-2126
Performance Air Cleaner and Breather Kit

• Includes backing plate, air filter, breather manifold and hardware.
VT No. Fits Air Cleaner Breather Snoot
• Fits FLT 1990-1992.
34-1236 2002-07 FLT
VT No. Item
34-2122 2008-13 FLT
34-1081 Chrome
34-2124 2002-07 FLT
34-1398 Black
34-2126 2008-13 FLT 90°
34-0948 Replacement filter only for 34-1236
WWW.VTWINMFG.COM 89
Air Cleaner
TOURING
Black with Black

Chrome with
Flame Chrome
Screen 5 Spoke
Screen
34-0244 34-0242
Chrome with
Black Flame
Screen
34-0238
Fits FLT 2008-2016

Chrome with Black with
Style
Black Screen Chrome Screen
5 Spoke 34-0233 34-0242
Flame 34-0235 34-0244
Fits FLT 2000-2007
5 Spoke 34-0236 34-0245
Flame 34-0238 34-0247
34-2122 Installed
34-0762 34-0763
34-1236
From Wyatt Gatling
Chrome Air Cleaners
• Washable element
Air Cleaner Kit
Cleaner Element Style Fits • Includes backing plate, air filter, breather manifold & hardware.
34-0762 34-0079 Drilled FL 1993-2007 VT No. Fits
34-0763 34-0079 Baby Moon FLT 1993-2007 34-1236 2002-2007
34-0510 34-0079 Drilled FLT 1979-1989 34-2122 2008-up, Wyatt Gatling
90 WWW.VTWINMFG.COM
Air Cleaner
TOURING
34-0527
34-1022 34-0530
34-0664 34-0657
34-0650
34-0630 34-0629 34-0628
Chrome Tear Drop Air Cleaners

• CV type carburetors. Includes cover, backing plate, filter, rub-
ber hose and hardware. 31-0430 34-0527 Installed
• Fits FLT 1999-2007 Chrome Tear Drop Finned Air Cleaner &
Finned Smooth Flame Breather Kit
34-0664 34-0657 34-0651 • Includes a chrome air cleaner assembly with a finned teardrop
• Fits FLT 1992-1999 cover, chrome mount bracket, backing plate, and a breather kit
34-0663 34-0656 34-0650 with a black hose and breather unit.
• Fits FLT 1990-07
VT No. Style
Smooth 34-0916 filter, 34-1054 Plate, 34-0515
34-1022
Cover
34-0511 Flames
Finned, 34-0916 filter, 34-1054 Plate, 34-1560
34-0530
Cover
34-0630 Slotted
34-0628 Maltese
34-0629 Skull and Crossbones
34-1528 31-0430 Air Cleaner Mount Kit 1992-98 FLT
34-0916 Foam Air Filter
34-0553 34-1041 34-1042

7” Round Air Cleaner
Includes breather tube, backing plate, and foam element. For
CV type carburetor.
34-1527
VT No. Item Fits
Siren Air Cleaner Assembly
• Includes chrome cover, backing plate and hardware. 34-1373 Kit w/o Brackets, logo FLT 1993-2007
VT No. Fits 34-1032 Kit w/o Brackets, smooth FLT 1993-2007
34-0553 Above with Brackets FLT 1990-1992
34-1528 FLT 1999-2007
34-1044 7" CV, Backing Plate FLT 1990-2006
34-1527 FLT 1984-1999 34-1041 7" Smooth, Cover Only FLT 1979-1989
34-1042 7" V-Logo, Cover Only FLT 1979-1989
WWW.VTWINMFG.COM 91
Air Cleaner
TOURING
31-0430
40-0346 installed on 34-1174
40-0346
Chrome Acorn Billet Canister Set
• Made from chrome billet aluminum and comes with bolts for
Evolution and TC-88 models.
VT No. Item Fits
40-0346 Full Set FLT 1992-2007
40-0345 Single Canister Custom for crossover metal tubes Crankcase Breather and Bracket Kit
34-0772 • Fits CV carburetors. Includes two ³⁄₈” x 16 and ¹⁄₂” x 13
threaded breather bolts. Fits 1992-98 FLT.
VT No. 31-0430
34-1882
Chrome Panzer Air Cleaner

• Can be installed on CV or S&S Super E carburetor.
VT No. Style
34-0772 Slotted
Chrome Billet Air Cleaner Kit

• For CV and EFI models.
• Kit includes air filter element, chrome mounting bracket, and
breather connectors.
VT No. Fits
34-1882 FLT 1993-2007
34-0773
Round High Flow Air Cleaner Kit

• Fits 2017-up FLHR, FLHT, FLHX, FLTR
FXFB 2018-up FXFB. FXBB. FXLR, FXFBS, FXBR 34-0773
Installed
VT No. 34-1466 Cycovator Air Cleaner Kit
• Forward mount air cleaner kit with tapered air filter
VT No. Fits
34-0773 FLT 1993-2007 Except 1995-2001 EFI
34-0469 34-0927
Miscellaneous Air Cleaner for FLT

34-1286 Tapered Air Cleaner Assembly, FLT 1992-1999 FLT
34-0469 Chrome EFI Bracket, Fits 2008-16
34-0927 Backing Plate, 2008-16
92 WWW.VTWINMFG.COM
Air Cleaner
TOURING
34-0557 34-0558
34-1431 34-1432 34-1434
Eagle Spirit Air Cleaner Inserts

• Gold or chrome inlay fit recessed area of round center screw
type units.
VT No. Finish Fits
34-0557 Chrome FLT 1984-1999
34-0558 Gold FLT 1984-1999 34-1438 34-1439 34-1440
34-0962
34-0933 34-1208 34-1441

From Wyatt Gatling
Replica Paper Air Filters Air Cleaner Inserts
• Feature original shape and • Features gold, chrome, or black inlay on a round chrome or
styling for exact fit. Washable black backing plate.
construction. • Fit 1999-2013 FLT
34-0063 Style Chrome/ Gold/ Chrome/ Gold/
Chrome Chrome Black Black
VT No. Fits
1990-98 FLST, FLSTC, FLSTF, FLSTN, FLT/C/U, Eagle 34-1431 34-1432 34-1434
34-0933
FLHT/C/P/U, FLHS Flame 34-1438 34-1440 34-1439 34-1441
34-0962 1991-01 TC-88, carburetor, 2002-07 carburetor and
electronic fuel injection
34-1208 2008-13 FLT, FLH
34-0063 2014-16 FLT
34-0060 34-0088
Air Flow Air Cleaner Insert
34-0736 34-0579 34-0917 • Available in chrome or black finish
• Includes mounting hardware
• Fits 1999-15 Big Twin except 2008-15 FXD and 2014-15 FLT
models. For use with stock type air cleaner cover.
VT No. Finish
34-0060 Black
34-0088 Chrome
34-1047 34-0976 34-0911
Air Filters
• Available in 3 types, K&N paper and Unifilter foam
• All have screen insert.
K&N Uni-Foam Fits
34-0736 2008-16 FLT, FLHR
34-0576 2002-07 FLT
1999-2001 TC-88 FLT with electron-
34-0579
ic fuel injection
1995-99 80” Evo with electronic fuel
34-0917
injection
34-1047 1990-99 80” Evo
34-0976 1990-92 80” Evo
34-0911 1986-89 80” Evo
WWW.VTWINMFG.COM 93
Air Cleaner
TOURING
40-0436
40-0452
Sifton Chrome Dual Canister Set

• Includes dual canisters and hardware.
VT No. Fits
40-0452 FLT 1992-2016
40-0892 FLT 1999-2016
Exposed Filter
• Fits 2008-2016 FLT.
• Provides enhanced airflow featuring a
laser engraved center nose cone.
VT No. 34-1672
34-0451 Installed 40-0446 40-0449 40-0450

From Sifton
34-0451
Dual Breather Kit
• Chrome canister features enclosed breather filter and remov-
able bottom cover for cleaning.
• Includes bolts, banjo tubes, and canisters.
VT No. Item Fits
40-0436 Full Kit FLT 1992-2016
Chrome Curved Air Cleaner Breather 40-0446 Breather Canister
• Includes steel bracket with breather bolts and tapered filter 40-0449 Tube Kit
element with chrome 90° intake tube to face forward on CV 40-0450 Straight Tube
carburetors
• Fits FLT 1993-2007 Except 1995-2001 EFI
VT No. Item
34-0451 Full Kit
34-0771 Breather Only
34-0274 Air Filter Replacement
40-0588 40-0451
From Sifton
40-0581 40-0532 Chrome Mini Crankcase Breather Vent Set
• 40-0451 includes 2 canisters and banjo tubes with hardware.
• 40-0588 includes tie wraps and longer banjo bolts.
VT No. Fits
Carburetor Vent Fittings 40-0588 FLT 1992-2016 Except 1995-2001 EFI
40-0451 FLT 1992-2016 Except 1995-2001 EFI
VT No. Angle Notes
40-0581 Straight All models, pack of 5
40-0532 90° FLT 1979-1999, pair
94 WWW.VTWINMFG.COM
Air Cleaner
TOURING
34-0775
Installed
34-1211 34-1340
34-0775
34-0671 34-0770 34-0062
34-0673 34-0693
Chrome Cone Air Cleaner

• Features cone and integral breather mount bracket for vertical
or forward mounting.
VT No. Item Fits
34-0775 Kit for Super E Carb FLT 1992-07
34-1211 CV Carb Only FLT 1993-07
34-0670 Horizontal FLT 1993-2007 Except 1995- 34-1340
2001 EFI
installed
34-0770 Breather Only FLT 1993-2007
34-0671 Air Filter Spike air cleaner breather
34-0673 Adapter Plate Custom for S&S E Carburetor
34-0062 Kit with cover
34-0693 Adapter Plate FLT 1993-2007
Cycovator Air Cleaner Kit
• Features a high filtration element .
VT No. Fits
34-1340 FLT 1999-2007
34-0062 FLT 1999-2007, Kit with cover
Oval Air Cleaner Assembly

• For CV carburetors which features late style shape chrome
cover.
VT No. Fits
34-1374 FLT 1993-2007 Except 1995-2001 EFI
WWW.VTWINMFG.COM 95
Speedometer
TOURING
39-0651
Installed 39-0610 39-0084 39-0085 39-0086
Electric Speedometer Assembly Speedometer and Tachometer Combination with a 5”

with digital tachometer available with black face that looks speedometer featuring MPH numerals. Display shows engine
like stock gauge or LED type. Both units feature a 8000 RPM speed, segmented fuel level, gear position, tripmeter, miles-
tachometer, LCD odometer and trip meter. Plug installation for to-empty and time. Features adjustable push button with
all 1999-03 models and 1996-98 models will require a separate multi-color backlighting which allows for adjustment of the
purchase of sub-wiring harness for correct installation. All 1993- face. Mounts to the stock dash opening with direct plug in
03 models with require the use of a tachometer wiring kit sold installation. Mileage must be updated at the time of installa-
separately. tion, no programming required.
Fits 1996-03 FLHR, FXST, FLST, FXDWG VT No. OEM Fits
VT No. Item 2004-06 FXDWG, 2007 FXDC
39-0084 67313-05
39-0651 Black Face Gauge 2004-06 FXST
39-0610 LED Gauge 2004-11 FXD, 2004-10 FXST,
Sub-Wiring Harness Required for Above 39-0085 7090070B
VT No. Use On 2004-13 FLHR
32-0587 1996-98 FXST, FLST 2011-up FLST
39-0086 74774-11
32-1334 1996-97 FXDWG 2014-up FLHR
32-1335 1998 FLHR
39-0768 1996-97 FLHR
Tachometer Wiring Kit
32-1336 1996-03 FLH
Stock Replacement Electronic
Speedometer to fit 1999-03 FLHR
models. Replaces OEM#67033-99A.
39-0453 VT No. 39-0453
FLT Dash Console •

Includes tachometer and speedome-
ter housing for 1981-84. KM/H.
VT No. 39-0398
Chrome Gauge Trim Set
35-6106 • Fits 2014-up.
35-6105 VT No. 39-0547
35-6108
35-6109
35-1075 35-1076 35-1077
35-6104
Fuel Filters
VT No. Fits Item EFI Replacement Fuel Pump Kit
35-6105 2008-up FLT, FLHT, FLHR, FLST Fuel Filter Only • Direct replacement for the OEM pump and includes pump hose and
35-6106 1995-99 FLT, FLHT, FLHR Fuel Filter hardware.
35-6104 2002-07 FLHT, FLT, FLHR Fuel Filter VT No. Fits
35-6108 2000-07 FLHT, FLHR Line 35-1075 1998-99 FLT
35-6109 1995-99 FLT, FLHT, FLHR Fuel Filter 35-1076 2000-01 FLT
35-0189 Petcock Fitting 35-1077 2008-15 FLT
96 WWW.VTWINMFG.COM
Oil
TOURING
Stock
Hex
12-9990
Oil Out Oil flows in around the outer 12-9992
diameter, through the filter media
and out passing by the magnet.
The magnet captures particles
Sifton TC-88 Super Pump
• Utilizes an oversized highly efficient Geo Rotor design.
less than 10 microns which could
have escaped through the filter • Provides a 40% increase in pump volume and a 60% more
wall. scavenging volume.
• Bolts into the stock location and includes O-Rings and mount-
MagnetekTM Oil Filter ing hardware
• Feature a magnetic ring in center tower to trap particles
VT No. Fits
less than 10 microns which could have escaped thru the
12-9902 1999-06 FLT
filter wall.
12-9990 2007-16 FLT
• Available in stock style or with built in hex nut.
Hex Stock OEM Fits Length
40-0836
40-0864 40-0852 63796-77 1980-98 FLT 3.75”
Oil Drain Spigot

• Red anodized finish keeps the fluid off of the frame.
• Channels transmission fluid from the bottom of your transmis-
MotorshopTM Brand Filter Pack
• Includes 6 pieces of individually wrapped and numbered fil-
sion case into the drain pan instead of onto your frame.
ters with 3” outside diameter and length as listed.
• Features a helical design that locks the tool into the frame
cross member and around the drain plug. This allows you to Chrome Black OEM Type Length
remove the drain plug through the center of the tool. 40-0198 40-0836 63782-80T 1982-84 2¹⁄₂”
VT No. 16-0096 40-0233 40-0838 63798-99 1999-up 3¹⁄₄”
17-0789 40-0941
40-0932
40-0860 40-0709
Spin-On Oil Filters

• Replaces stock units in chrome or black, V-Twin Brand in
stock or with hex nut.
• Length is 3.75”
40-0673 Hex Stock OEM Finish Fits

17-0958 17-1542
40-0860 40-0708 63805-80T Black 1980-98 FLT
40-0872 40-0709 63796-77T Chrome As Above
8405-2
Transmission Filler Plug with Dipstick 40-1710 40-171

• All plugs are chrome except 8804-2 as noted.
VT No. Head Style Fits K&N Spin-On Oil Filters
40-0932 Allen FLT 2007-up • Available in chrome or black finish. Feature hex nut end for
17-0789 Allen FLT 2007-up easy removal and installation, improved pressure relief valve,
40-0941 Knurl FLT 2007-up anti-drain back valve and heavy duty base plate with improved
17-0958 Hex FLT 2007-up rolled seal.
40-0673 Hex FLT 2007-up
17-1542 Hex FLT 1980-1986 Chrome Black Fits Length
8405-2 Acorn FLT 1980-1986 40-1710 40-1711 1980-98 FLT 3.75”
WWW.VTWINMFG.COM 97
Oil Cooler
TOURING
40-0890
40-1500 40-0886
Oil Temperature Dipsticks
Jagg Black Oil Cooler • Features a hex design, lighted LCD readout, Fahrenheit or
• Features multipass oil flow configuration, specially designed Celsius operation and a replaceable battery.
Chrome Black Fits
turbulators in each oil passageway, and highly concentrated
mini louvered air fins. 40-0890 40-1286 FLT 2017-up
• Available in vertical mounting orientations. 40-0886 FLT 2007-08
40-1285* FLT 2007-16
Vertical Mount
40-1500 FLT 1984-13 w/o ABS
*Note: Oil level and temperature dipstick. All others are oil tem-
perature only.
Oil Temperature Dipstick for M-8 Touring

40-0471 • Features a black finish with machined hi lites. Replaces
OEM#62700136. Fits 2017-up FLT models.
VT No.
40-0634
Dual Oil Cooler Kit 40-0661

• Includes dual tube vertical oil cooler with billet mount clamps
measuring 10” long and 4¹⁄₈” at top diameter.
• Stainless steel braided lines and 4 chrome seal ends included.
VT No. Fits 40-1281
40-0471 FLT 1998-2016
Custom Oil Dipsticks
• Chrome finish and designs as noted.
• For FLT
Style 1993-98 1999-06 2007-16
Smooth 40-0661
Flame 40-1281 40-1273 40-0625
40-0024
40-0022
Radium Engine Oil Filler Kit

• CNC machined from 6061-T6 billet aluminum
• A thread in one piece dipstick, which eliminates dipstick blow
out on acceleration.
VT No. Fits
40-0022 FLT 1993-1998 Chrome Oil Hose Cover
40-0023 FLHT 1999-2001 • Includes all chrome plated mounting hardware
40-0024 FLHT 2002-2006 VT No. Item Year
42-0695 Oil Hose Cover 1999-06 FLHT
Oil Filler Spout Cover 9949-6 Acorn Mounting Kit
• Match the chrome transmission 9949-6T Acorn Mounting Kit
interface cover. Fits 1999-01 FLT. 9950-6 Allen Mounting Kit
VT No. 42-0824 9950-6-P Polished Allen Mounting Kit
Chrome Oil Filler

Spout fits 1993-06 FLT mod-
els. Replaces 62470-06.
42-0887 VT No. 42-0887
98 WWW.VTWINMFG.COM
Throttle Cable
TOURING
Full Stainless
Braid Covering
with Clear Coat
Throttle and Idle Cable Set

SS Black Length Fits
36-0826 36-0878 39” Idle
43” Throttle 2002-07 FLHRI, FLHRCI
36-0880 36-0879 As Above +8”
1994-95 FLHR, 1990-95 FLHT,
36-0773 43”
1990-93 FLHS
1998-01 FLTRI, 1996-01 FLHT-
36-0825 46” 36-2468
CUI, 1996-1996 FLTCUI 36-0760
Barnett Big Twin Throttle/Idle Cables

• Available in black vinyl or braided stainless covering with correct end fitting for each application, also available in over stock length.
Assemblies unless noted.
Barnett
Barnett Barnett
Stainless OEM Fits
Stainless Black
Clear Coat
— — 36-2468 56328-81 Stock 1981-89 FLT-FLHT Throttle
— — 36-2469 56327-81 As Above, Stock Idle Cable
— — 36-2503 56327-90 Stock 1990-95 FLT-FLHT-FLHS Throttle
— 36-0650 36-2504 56328-90 As Above, Stock Idle Cable
— — 36-0707 56327-96 Stock 1996-2001 FLHR-FLHT Throttle
36-0708 — 36-0709 56328-96 As Above, Stock Idle
— — 36-0764 56357-02 Stock 2002 FLHR, FLHT Throttle
— — 36-0765 56362-02 Stock As Above Idle
— — 36-0711 56379-96 Stock 1996-up FLHR-I Throttle
— — 36-0760 56368-96 As Above, Stock Idle
— — 36-0715 56357-96 Stock 1996-up FLHTC-I Throttle
— — 36-0760 56368-96 As Above Idle
Handlebar Cable/Line Install Kits
• Complete cable/ line installation kits for 12”, 13”,14”, 15”, 16”
and 18” ape hangers
• Kits include extended brake line, extended clutch cable/
clutch line, extended throttle/ idle cables as required and all
necessary wiring extensions
• Kits come in black
• Dresser kits reuse stock throttle-by-wire harness as required.
Note: All kits are base on using 2” risers with Ape hanger
style bars
Handlebar Cable and Brake Line Kit
VT No. Size Year Model
36-1600 14” 2008-2013 without ABS FLHX, FLHT, FLHTC, FLHTCU
36-1601 15” 2008-2013 without ABS FLHX, FLHT, FLHTC, FLHTCU
36-1602 14” 2008-2013 with ABS FLHX, FLHT, FLHTC, FLHTCU
36-1603 15” 2008-2013 with ABS FLHX, FLHT, FLHTC, FLHTCU
36-1604 14” 2008-2013 without ABS FLHR, FLTR
36-1605 14” 2008-2013 with ABS FLHR, FLTR
36-1606 14” 2014-2015 without ABS FLHR, FLTR
36-1607 14” 2014-2015 with ABS FLHR, FLTR
36-1612 14” 2007-2007 with cruise control FLHR, FLHRI, FLHRCI, FLHRS, FLHRSI, FLTR
36-1613 14” 2007-2007 without cruise control FLHR, FLHRI, FLHRCI, FLHRS, FLHRSI, FLTR
WWW.VTWINMFG.COM 99
Clutch Cable
TOURING
36-0558
36-0561
36-0560
Braided Stainless Steel Clutch Cables
FLT Clutch Cables Throttle and Idle Cable Sets
Black Vinyl SS Braided Cable Length • For FLT models.
• Fits 2007-up FLT. Replaces 38667-07. • 90 Degree Fitting fits 1996-07 FLT. Replaces 56344-00.
36-1150 36-1160 63” Black SS Braided Cable Length
• Fits 1987-06 FLT. Replaces 38607-87A. 36-0858 36-0857 34.25”
36-8090 36-8048 62.69” 36-0861 36-0128 8” overstock
— 36-0558 2” over stock 36-8100 36-0119 12” overstock
36-8091 36-0559 4” over stock — 36-0131 17” overstock
36-8092 36-0560 6” over stock
— 36-0518 8” over stock Barnett Stock Clutch Cables
• Feature heavy duty construction designed for reliability and
36-8093 36-0561 10” over stock
longer service. By Barnett in black vinyl or braided stainless
— 36-0556 12” over stock covering. *Note: Uses eyelet style end. Hand lever pin is sup-
36-8094 36-0557 16” over stock plied.
• Fits 1983-86 FLT. Replaces 38599-83A. Stainless
— 36-8054 53.31” with Casing
Black OEM Fits
• Fits 1980-82 FLT, 1981-83 FLHT. Replaces 38599-80B. Clear Length
— 36-8058 55.44” Coat
36-1531 36-2366 38607-87 Stock 1987-06 FLT 63”
8 Extension,
36-1532 36-2369 — 71.375”
As Above
Speedometer Cables
Stainless Speedometer Drive Seal
VT No. OEM Fits
Black
14-0966 67096-87 1987-95 FLT
Speedometer Drive Spacer

• Replaces drive units.
Front Wheel Drive Speedometer Cables VT No. Fits
• Choose by application or by length and top nut size. 44-0370 1995-up FLT
• Available in black vinyl, stainless or clear coated stainless
Black Vinyl Stainless OEM Length Top Nut Speedometer Drive Unit
1987-95 FLST Models • Fits front wheel only with .750 axle hole. Use for right and
left side as noted.
36-2417 36-2428 67079-86A 34” 12mm
VT No. OEM Side Length Length Fits
1987-95 FLHT-FLHTC-FLHTC-U Models
36-0804 67073-81 Right Flat .532” 1984-86 FLT
36-2418 — 67060-87A 39” 12mm
36-2450 67073-87A Left .421” 1.245” 1987-95 FLT
1980-86 FLT Models
36-2453 67101-96 Left .442” 1.248” 1996-99 FLT
67072-79A
36-2412 — 40” 12mm
67072-87B
— 36-0127 Coated 40” 12mm
17-0595
Electronic Speedometer Sensor Unit

VT No. Years Model
17-0595 1995-up FLT
100 WWW.VTWINMFG.COM
Engine Mount Stabilization
TOURING
Chrome Velva Ride Engine Stabilizer 31-0905 31-0900
• Features a steel body with plunger and urethane dampener
that creates a mini shock absorber. ISO Mount
VT No. Fits • Replaces stock on all Big Twin rubber mounted engines. The
31-1983 FLT 1979-2008 mount plate is billet aluminum with a polyurethane bushing
assembly.
VT No. Year Finish
31-0905 1979-2008 Chrome
31-0900 1979-2008 Black
Front Engine Mount Set for 2009-16 FLT. Replaces 16207-

09.
VT No.
Chrome Front Engine Mount Assembly 31-0835
• Includes bracket, link, and ISO mount with hardware.
VT No. Fits
31-0625 FLT 1979-2007
31-1975 31-0682
FLT Stabilizer Bar Chrome

VT No. Fits
31-0010 FLT 2009-up
Urethane Engine Mount
• Replaces stock on all Big Twins with rubber mounted engines.
• The formulated compounds enhance compression and
rebound dampening properties for a 20% reduction in vibration.
• For FLT 1979-2008 Chrome Front Engine Mount Stabilizer
VT No. Brand Finish VT No. Fits
31-1975 V-Thunder Black 31-0286 FLT 1979-2008
31-0900 Sifton Black 31-0962
31-0682 Sifton Black
31-1278 31-0121 31-0155

31-1277
31-0240
31-4065
31-0258
Front Mount Brackets for 2008-up FLT. 31-1274

VT No. Finish
31-1277 Chrome
31-1278 Black
Engine Mount Components
31-0256 31-0257
Note: Chrome unless noted
VT No. OEM Item Fits
31-0121 16207-79B Front Mount, Black 1979-08 FLT
31-0155 16207-79B As Above
Chrome Top Engine Mounts 31-0258 96210-80 Washers for Above, Zinc
• Feature two piece design, to be installed on rubber mounted
engines in stock or custom solid mount frames. 31-0240 16219-79B Stabilizer Link 1979-08 FLT,
VT No. Fits 31-4065 47159-79A Front Bracket As Above
31-0256 1980-83 31-0962 16321-08 Upper Front Mt 2009-up FLT
31-0257 1984-98 31-1274 2009-up Stabilizer Link 2009-up FLT
WWW.VTWINMFG.COM 101
Swingarm Component
TOURING
44-2058
44-2039 44-2040 44-2041 31-0444
44-2044
31-0452 44-0883
31-0442 31-0443
44-2061 44-0887 44-2062

44-2055
44-2054
44-1991
44-2040
44-0882
44-2052 44-0982
44-1984
FLT Swingarm Rebuild Parts
VT No. OEM Year Item
44-2039 47510-80 1980-01 Plastic Retaining Ring Swingarm Mounting Kit
• Includes two bushing assemblies, two spacers, two plastic
44-2040 47511-80 1987-01 Spacer
retainer rings, two rubber isolators and pivot shaft with locknut
44-2041 47513-80 1987-01 Nylon Washer and all parts required to mount transmission and swingarm to
31-0444 47538-79 1979-01 Bushing Ring pivot block.
31-0452 47556-81 1979-01 Bushing Assembly • Will work with stock or aftermarket rubber mount swingarm
31-0442 47564-82 1982-86 Mount Bushing, each frames for FLT models.
31-0443 47564-86A 1987-08 Mount Bushing, each VT No. Year
44-2061 47584-09 2009-up Mount Bushing Set 44-2058 FLT 1980-81
44-2042 47491-89 1989-01 Cup washer, 5 pack 44-2044 FLT 1982-01
44-0887 47606-02 2002-08 Nut Set 44-2055 FLT 2002-08
44-0883 9208 2002-up Bearing Set 44-2059 FLT 2009-10
44-0882 47491-02 2002-10 Washing Set 44-0982 FLT 2011-up
44-2054 47505-02 2003-10 Shaft
44-1991 47492-89A 1989-01 Shaft
44-1984 47515-82A 1982-88 Shaft
44-2052 47515-80A 1980-81 Shaft
44-2062 47606-09 2010-up Nut
37-0538 67865-89 Plug, Chrome
44-0941
1982-02 FLT Kit

• All pieces are included for ease of installation.
• Updated Design
Iso-Mount Swingarm Pin Kit • Rubbers included
• Includes Iso sleeves, pin and side bushings for 1993-2002. • Controls lateral and torsional movement at pivot point
• Close tolerance updated spherical bearings included.
VT No. Item
VT No. Item
44-2063 Kit
44-0941 Kit
44-0960 Spacer Set
Swingarm Components
TOURING
Key Tab
42-0030 Detail
Chrome Swingarm Mount Kit 51-0992 51-0994

• Includes right and left chrome pivot caps, chrome passen-
ger footboard mounts and chrome passenger footboards with
rubber pads for Touring.
VT No. OEM Fits
42-0030 47850-88T 1982-89
44-2060 51-0992 will retro fit 1982-02 to accept foot pegs and foot
board mounts on the right and left side.
*Note: Key tabs to secure rubber bushings.
Swingarm Kit Chrome Pivot Mount End Caps
• Includes 2 offset steel bushings and 2 alloy washers. • Fit years as noted.
VT No. Fits
VT No. Year
44-2060 FLT 1980-2008, FL 1980-2008, FLHTC 1980-2008 51-0992 1982-06
51-0994 2007-08
Nylatron Swingarm Bushing Kit

• Four piece bushing set replaces swingarm bearings and sta-
bilizes swingarm rubber mounts.
• Order pin separately. Order (31-3986 or 31-0443) frame
mount bushings separately.
Swingarm Iso Mount Pin Kit
VT No. Fits
• Includes pin and outer support bushings with steel side
44-0671 FLT 1982-2002, FLHT 1982-2002, FLHR 1995-2002 plates for upgrades.
VT No. Fits
44-2064 1993-02 Touring
Tool Kits
16-0011 16-0098
DIY Touring Tool Kit

• For 1999-2013 models will fit in a kidney shaped tool box. 16-1070
Includes rider tools and service tools for the rider-mechanic.
VT No. Fits
16-0011 1999-13
16-0098 2014-16
16-1070 2017-up
Factory Spare Parts Book
VT No. OEM Fits
48-0718 99456-03 2003 FLT
Controller Plugs
TOURING
Power Commander III USB Engine Management System for

fuel injected models and allow for both fuel and ignition adjust-
ments. Each unit includes a specific map, designed to improve
V-Twin Performance Spark Plugs
• For M-8 models features a copper core electrode for a longer
performance over stock. The Power Commander includes IBM
service life, nickel plated housing, 95% pure alumina insulator
compatible link cable and software package which allows you
and a heat crimping process to ensure a leak free seal.
to fully map the fuel ignition curves on IBM compatible com-
puters. If a computer is not available, the fuel curves can be VT No. Fits
adjusted by using three touch buttons on the face plate. 32-1325 2017-up M-8 applications 108 cubic inch
32-6692 1984-98 Evolution 5R6A
VT No. Year Model
32-6691 1999-16 FLT 6R12
32-3012* 2007 FLT
32-6693 As Above One Heat Range Hotter
*Note: Includes O2 eliminators.
32-6694 As Above One Heat Range Colder
Copper Plus
VT No. Engine Fits HD#
Champion
32-9190 32-9192 32-7547 TC-88 1999-16 FLT 6R12 RA8HC
Evo
32-7540 1984-98 FLT 5R6A RN12YC
32-9191 32-9193 1340
Shop
32-0160 1984-98 FLT RN12YC
Pack of 24
Accel 8mm Stainless Steel Spiral Core Wire
Set Autolite Platinum Plugs.
• Designed specifically for Harley-Davidson Milwaukee 8, Twin VT No. Autolite# Fits
Cam
32-9231 AP4265DP2 1984-98 FLT
• Delivers up to 5 times more peak energy than other
“Performance Wires” 32-9232 AP4164DP2 1999-16 FLT
• Maximum RFI protection to shield sensitive electronics with 500
Ohms per foot Autolite Standard Spark Plugs
• Spiral cover wire utilizes stainless steel alloy conductor with 10 Pack Pair Autolite# H-D# Fits
fiberglass/Kevlar inner core for strength 32-9295 — 4164 6R12 1999-16 FLT
• Lower resistance delivers more energy to the spark plug 5RL
• Custom fit sets are ready to install-no cutting or crimping 32-9297 32-9298 4265 5R6 1984-98 FLT
required 5A6A
• Fully capable with Delphi fuel injection system
• 1.5mm x 6.5 mm x 8mm
Black Blue Red Yellow Year
1999-08 FLT w/EFI
32-9162 32-9183 32-9184 32-9185
carb
32-1441 32-1442
32-9186 32-9187 32-9191 32-9188 2009-16 FLT Skull Ignition Switch
32-9190 32-9191 32-9292 32-9193 2017-18 FLT Chrome Black Fits
2011-2017 FLST, FLSTF
32-1439 32-1440 2014-2018 FLHR, FLHRC
2012-2017 FLD, FXDF, FXDWG, FXDB
1996-2010 FXST, 1996-2011 FXDWG,
32-1441 32-1442
1995-2013 FLHR
Dash/Fuel Door
TOURING
39-0571
39-0221 39-0654 38-0430 38-0441
Chrome Dash Cover and Extension.

• For use with shorter seats.
VT No. Item Fits
39-0571 Dash Cover FLT 2003-2007 38-0442 38-0602 38-0603
39-0221 Extension FLT 1996-up models with a
shorter seat
39-0461
38-0604 38-0605 38-0606
Dash Stash Box

• Fits 1997-2007 FLHT with a short nose seat. 42-1207 42-1208
38-0495
VT No. Finish Fuel Console Door.
39-0461 Raw Fits 1992-07
39-0654 Chrome
35-0583 38-0430 Black skull
35-1459 Fits 2008-up
38-0441 Chrome
38-0442 Black
42-1207 Black (smooth)
42-1208 Chrome (smooth)
38-0602 Black with chrome flame skull
38-0603 Chrome with black flame skull
Stock Type Vacuum Body Petcock 38-0604 Black with chrome flames
• Available with black body with natural finished handle or nat-
38-0605 Chrome with chrome flames
ural finish body and handle. Both types include zinc plated nut
38-0606 Chrome with Live to Ride
and filter screen unless noted. For use with stock size fuel line.
38-0495 Black Eagle Spirit
Body Finish Fits OEM
Black Natural
35-0222 35-0583 1995-01 Big Twins 61338-94D
35-1459* 35-0585* 2002-06 Big Twins 61338-02
*Note: Does not include filter screen
38-0432 38-1284 38-0434
Magneti Marelli Fuel Injection to
Carburetor Petcock Conversion Fitting Set
Console Fuel Door Push Button
• Converts all 1995-01 FLT equipped with
Magneti Marelli Fuel Injection System to car- VT No. Finish
buretor system. 38-0432 Chrome
• Can be used with any 22mm petcock. 38-1284 Black
VT No. 35-0751 38-0434 Chrome, Key Operated
FLT EFI Fuel Line Kit replaces the

Delphi Fuel Injection to Carburetor
fuel line from the gas tank to the fuel
Conversion Fitting Set includes gas tank
rail. Fits 2012-16.
fitting to eliminate Delphi fuel injection and
VT No. 35-6111
use a carburetor and late style petcock.
• For 2002-up FLT models. 38-0506 Fuel Gauge.
VT No. 35-9353 • Fits 2008-up FLHR
Adapter Bushing allows use of carb type pet- Chrome Black
cock on electronic fuel injection FL models. 38-0506 38-0507
35-0748 VT No. 35-0748
Gas Tank
TOURING
38-0925
38-0255
38-0475
39-0571 5 Gallon Stretch Gas
Tank
• For FLT models including FLHT,
FLHR and FLTR models without
fuel injection.
• Tanks include custom console to
cover OEM gauge sending unit.
• Use standard bung right and left
caps and petcock.
•Shorter seat may be required.
VT No. Year Type Gallon
38-0473
38-0255 1997-03 Carburetor 5
38-0475 1996-06 Carburetor 7
38-0473 2003-07 EFI 7
38-0474 2008-up EFI 7
38-0925 2008-14 EFI 6.6
39-0571 2003-07 Dash Panel
37-9329
Custom Tank Mount Bolt Sets.

38-0474
37-9329 1998-up FLT
38-0186
Bobbed Tank Kit

• Features a one piece 4 gallon design tank which includes
chrome bung style caps and hardware for installation.
35-0601 • Kit for include a chrome cast dash, 5 lamp dash base and a
35-0602
6 post bobbed type key switch with a 2240:1 ratio speedome-
35-0606
ter and front wheel drive cable. Use of a shorter seat may be
required. Models for 1980-85 require drilling for rear mount.
• Fits 1980-99 FLT.
Fuel Tank Sending Units VT No. Item
• Digitally calibrated for accuracy. 38-0186 Kit
38-0298 Tank Only
VT No. OEM#
2530-6 Mount Bolts
35-0601 75037-84 1984-87 FLT
35-0602 75040-88 1988-94 FLT Fork Lock Cover
35-0606 75071-95 1995-96 FLT • Smooth dome shaped.
35-0608 75040-97 1997-99 FLT • Fits FLHR 1994-up.
35-0711 75139-00 2000-01 FLT
35-0712 75205-02 2002-05 FLHR, FLHRI, FLHRCI Chrome Black
35-0713 75071-02 2002-05 FLHT, FLHTI, FLTR, FLTRI 42-0133 42-0134
Headlamp Cowl for FLT
TOURING
33-0080
Installed
24-0228
33-0080
33-2134
Installed
24-0229
33-2134
Chrome Upper Fork Covers

• Unique 2 piece design which allows easy installation over
stock covers without fork disassembly or removal.
• All components are chrome plated steel.
VT No. OEM Fits
24-0228 68064-94 1986-96 FLTC, 1987-93 FLHS,98-13 FLTR
24-0229 68063-94 1986-13 FLHTC, FLHTCU
24-1672 Chrome 2018-up FLFB, FLFBS 33-0547
24-1673 Black 2018-up FLFB, FLFBS 33-0547

33-2004 Installed
24-0227
Frenched Headlamp Ring fits 83-13 models VT No. 33-0547
31-0499
13-0983
37-0997 31-0247 31-0246
33-0808
Parts Available Separately

33-2004 Headlamp Assembly
24-0227 Upper Chrome Fork Cover Set, 1994-13 FLHR
33-1477
31-0499 Spot Lamp Bracket
31-0246 Top Trim Strip
31-0247 Rear Trim Strip
37-0997 Speed Nut
33-1479
Headlamp Trim Ring
• For FLT, FLHR, FLHX, FLHT models
• Available in black or chrome plated and in stock, contoured,
24-0272 24-1671 frenched, visor or burst styles. Mounts same as stock ring for
Front Fork Air Baffle easy installation.
1986-2013 2014-up FLT,
• Fits 1980-up FLT/FLHT models, does not fit 1998-up FLTR. Type Finish
FLT FLHT, FLHX
Replaces 58520-79TC.
Chrome Black 33-2134 33-2134 Stock Chrome
33-0080 33-0080 Contoured Chrome
24-0272 24-1671 33-0547 33-0880 Frenched Chrome
Handlebar Cover 33-0812 33-1116 Frenched with visor Chrome
33-1112 33-1113 Frenched with Visor Black
• Allows use of 1¹⁄₄” bars with built in risers to fit
33-1476* 33-1478* Burst Chrome
Road King models with cowl assembly. 2003-13. Black
VT No. 24-1063 33-1477* 33-1479* Burst
anodized
Handlebar Cover 13-0983** 13-0983** Clip Only
• For use with 1¹⁄₄” one piece bars with 12” or 16” *Note: For 1994-up FLHR applications use 33-1428 chrome
rise. Features an additional hole in the center. Fit or 33-1479 black trim rim. 33-1476 and 33-1477 will not fit
2014-up FLHR. 1994-up FLHR applications. **Note: for use with stock and
VT No. 24-1088 contoured trim rings only.
Headlamp
TOURING
33-1100
33-1565
33-1101
33-1566
Dual LED Headlamp Unit

Glide Headlamp Trim • Includes two LED daylight headlamps mounted onto a back-
• Adds a clean custom look to the nose of Road Glide model. ing plate for easy installation, features a housing with reflector.
• This easy-to-install Headlamp Trim Fits 2004-13 Road Glide models
• The self adhesive headlamp trim can be installed without VT No. Finish
removing the headlamp or fairing. 33-1100 Chrome
• Fits 2015-up Road Glide models. 33-1101 Black
• Available in chrome or black finish.
VT No. OEM Finish
33-1565 61400411 Chrome 7” Glide Chrome Deco
33-1566 61400412DH Black Headlamp Visor
• Fits lamps in chrome shells or in cowls.
VT No. 42-0209
Visors 42-0200 and 42-9925 Signal Lamp

42-0202 installed
Chrome Lamp Visors

• Easy-to-install.
VT No. Type
42-0200 7” FLH Headlamp
42-9925 1963-85 FL Signal
42-9942 Signal 1986-up FL
Lamps listed are for show or decorative use only, and not D.O.T. approved.
Headlamp
TOURING
33-1008
33-1415
33-1008
31-0080
33-1044 Wyatt Gatling 7” LED Headlamp Assembly

• Features six LEDs on both sides of the bulb. Bulb features a
parabolic lens design and the LEDs acts as running lights or
turn signals. Fits 1960-84 FLH and 1994-13 FLT models.
Note: 1999-2013 models will require a mounting bracket.
VT No. Item
33-1008 Assembly
31-0080 Bracket to Install on 1999-13 FLT models
33-1783
33-1044
7” LED Headlamp Unit

• Features black shaded reflector. *Note: LED lamp unit
includes built in DRL (Day Running Light). Order adapter ring
31-0080 separately for FLT applications. Fits 1960-84 FLH
and 1994-13 FLT.
VT No. 33-1044
33-1106
31-0080
33-1104 33-1105
7” LED Headlamp Units
• Available with LED Halo Daytime Running Light Ring on LED Headlamp for FLT
turn signal ring. Chrome Black Fits
VT No. Type Fits
33-1104 33-1105 1994-13 FLT
33-1415 Black with turn signal 1994-13 FLT
33-1106 33-1107 2014-up FLT
33-1044* Black with DRL Halo 1994-13 FLT
33-1783 Black with turn signal 2014-up FLT
33-1106 Chrome with turn signal 2014-up FLT
31-0080 Replacement Bracket
*Note Requires 31-0080 mounting bracket for installation on
1999-2013 FLT models.
Caution: Do not touch any Halogen bulb glass with bare hands during Headlamp Static Harness.
installation or replacement. The manufacturer advises that the light unit VT No. 32-1721
is not washed with a water hose as the unit is not a sealed beam unit.
7” Lamp Units
TOURING
Diamond Cut
Lamp Unit
• Features H-4 bulb
and white LED ring.
VT No. 33-0948 33-0850 33-0201 33-1557
33-4080
7” Faceted H-4 Lamp Unit 33-4081
• Features 60/55 bulb with parking lamp.
VT No. 33-0206
12 V 33-0110
7” Halogen Lamp Units

• Feature early styling and H-4, 55-60 watt replaceable bulb
included. Both fit stock or custom headlamp shells. Shell is
not included.
VT No. Type Bulb
33-0850 Blue Dot 33-2170
33-0201 Clear Flat 33-2170
33-1557 Flat 33-2170
33-4080 Amber Lens
33-3072 33-1032 33-4081 Smoked Lens
Round Sealed Beams are replacement type. 33-0110 H-4 Bulb Candlepower
VT No. Volt Watt Brand
33-2009* 12 Volt 60/55 Wagner 7” H-4 Head-
33-3072 12 Volt 60/55 Beck lamp Assembly
33-1032 12 Volt 60/55 Cycle Beam • Without chrome
*Note: Halogen Type Sealed Beam outer rim. Headlamp
33-1717 is attached to a black
33-1782
housing.
VT No. 33-3041
33-1738
White LED 12V Bulb
• With 3 pin socket for replacement of H-4 units. Features 360° 33-1737
beam angle. Low draw won’t drain the battery, remains bright SMD LED H4 Headlight “Bulbs”
regardless of battery condition! **Note: Due to the brightness These LED projector bulbs feature state of the art SMD technology and
of the bulb, the headlight trim angle may need to be adjusted have a heavy duty construction with , unlike conventional bulbs, a high
to avoid distraction of other drivers. Does not work on new resistance to torsional frame vibrations. The high powered patterned
SMD type LEDs provide maximum illumination. They come complete
Indians. The overall length is 3³₄” with an extended outer body
with socket adapters to allow fitment with any headlight with H4, HS1,
length of 1³₄”. BA20D, T19, P43T or P45 base. High Beam is 1,500 Lumen at only
VT No. Watt Lumen 18 Watt low beam is 1,000 Lumen at only 12 watt, which is better as a
33-1782 30 3000 common H4 bulb. Does not require the installation of separate ballast as
33-1717 these bulbs feature a built-in rotary cooling fan.
25W 2500
LED H4 Bulbs.
33-1447 H9 High Beam Headlamp VT No. Color Connection Type
33-1736 White H-4 Plug
Replacement Bulb 33-1737 White Bullet Connectors
• Fits 2014-up FLHX, FLHXS, FLHR.
33-1738 Yellow H-4 Plug
OEM # 67717-01.
VT No. 33-1447 33-1739 Yellow Bullet Connectors
33-1782 White H-4 Plug
Headlamp Cowl for FLT
TOURING
24-0286
24-0247 24-0260
24-0287
Chrome ABS Headlamp Housing Only
• For conversion order internal kit 33-2004 separately. Use
on all 1980-92 FLT, 1983-85 FLHT, FLHTC, 1987-92 FLHS.
Available with or without throttle cable hole. VT No. 24-0247
has hole for cable.
VT No. OEM Type
24-0247 67680-91 With throttle cable hole
24-0260* 67680-91 Without throttle cable hole
*Note: Fits 1993-94 FLHS
Chrome Headlamp Housing Kit 24-0355

• Fits 1980-86 FLT, 1983-85 FLHT-FLHTC and 1987-92 FLHS
includes chrome ABS headlight housing, 7” H-4 lamp assembly
with rim, upper fork covers (which can be installed without dis-
assembly of fork) and chrome fork air baffle.
24-0355
VT No. Model
24-0286 1980-86 FLT, 1983-85 FLHT
24-0287 1987-92 FLHS
24-0267
24-0318
24-1670 Chrome Headlamp Cowl Kit

• Includes right and left sides.
• Fits 1986-13 FLT models to update to Road King style.
• Includes housing assembly, handlebar top cover, headlamp
assembly, top and rear trim strip and mounting hardware.
VT No. Item
24-0355 Complete Housing Assembly Kit
33-1751 Complete with LED
Complete Assembly with lamp, chrome upper
24-0318
fork leg covers and chrome fork air baffle
24-0267 Housing Set Only for stock FLHR
24-1471 Headlamp Black Kit
24-1670 Complete without bulb
Fork Assembly
TOURING
Chrome Fork 24-0211

Assembly
• Features chrome triple trees,
chrome or polished lower legs,
axle, chrome upper fork cov-
ers and full chrome cowl and
handlebar top chrome cover 24-0178
assembly.
• Units accept dual disc caliper
as required by year.
2000-06
24-2223 24-0268
24-0210
24-2223
24-9999 17-0949
FLT Fork Assembly

• Fits 1984-99 FLT and includes chrome lower sliders with all
internals and stock length tubes installed, chrome triple tree set,
24-1311 24-1312 24-0313 chrome slider covers, axle, bearings and dust covers. Accepts
Triple Trees for 2009-13 FLHR cowl set not included. Also accepts 11.5” dual disc com-
VT No. Item Finish ponents.
VT No. Item
24-1311 Top Chrome
24-9999 Fork Assembly Complete w/Chrome Sliders
24-1312 Lower Chrome 52-0856 16” Chrome Wheel
24-0313 Lower Black 24-0355 Cowl Assembly
24-0268 Top Handlebar Chrome Cover
31-0246 Cowl Top Trim Piece
24-0522 Right and Left Leg Assembly, Chrome
Fork Stem Nut Wrench 24-0210 Chrome Upper Tree
• Fits FLHR, FLHT.
VT No. 16-1977 24-0211 Chrome Lower Tree
24-0212 Chrome Tree Set
24-9960 Chrome Slider Covers
Neck Hardware Kit 37-0860 Slider Cover Screws
• FLT 1980-up 24-0772 Fork Installation Kit
• Available separately. 44-0675 Axle Kit Only
VT No. 24-0367 17-0949 Nut Lock Tab
37-1010 Pinch Bolt Set
Headlamp Static Harness.

VT No. 32-1721
12V Receptacle
• For cell phone, MP3
player or lighter.
VT No. 32-0845
33-0561 33-0562
Universal Cigarette Lighter
• Available for panel mounting Namz On Board Power Port
• With dust cover.
VT No. Type • Plugs into on board diagnostic port.
33-0561 Without bracket Fits 1994-11 FLT models.
33-0562 With bracket VT No. 32-6579
Spotlamp
TOURING
33-0152
4.5" LED Spotlamp Assembly
• 12 volt, 55/60W, and features a H4 bulb.
• Custom Application
VT No. U/M
33-1304
33-1184 33-1184 Each
33-1545 Set
33-1190 33-0098
Spotlamp Bulb Kit

• Fits 1996-up FLT-FLHT models
VT No. Item
33-0152 Bulb Set H-3
33-0066 33-3051 33-1304 881 12 Volt
33-1190* 881 12 Volt LED
33-0098** Bulb Set with harness
*Note: LED type bulb set bright white beam 6000k.
**Note: Includes harness that allows spotlamps to remain on
33-0073 when high is used.
33-0973 4¹⁄₂" Halogen Beam Bulb, 2006-up

33-1042 Inner Mount Ring Set
33-1110 Chrome Shell and Wire Kit
Chrome 12 Volt Spotlamp

Assembly
• With mount spacer and clear bulb.
• Sold as pair unless noted.
33-1016 33-0903
33-1016
12 Volt Spotlamp Assembly
• With mount spacer and clear bulb. VT No. Type
Chrome Black Type/Year U/M 33-1016 4.5” LED, 1979-up FL, each
33-0066 33-3051 1979-up FLT Pair 33-1732 4.5” LED, 1979-up FL, set
33-0073 Blue, 1979-up Pair
31-0354
33-1016 LED/1968-up Each Front Turn Signal
33-0903 Halogen, 2006-up Touring Each
Relocation Kits
• Fit 1996-up FLT.
VT No. Fits
31-0353 With Spot Lamp Bar
33-1735
31-0354 Without Spot Lamp Bar
Independent Control Auxiliary Lamp Wire

Chrome 12 Volt Spotlamp Harness Kit
• Includes with mount spacer and amber running lamp. • Maximizes your night time view. Simple-to-install wiring har-
• Universal Mounting ness permits independent control of your bike’s auxiliary lamps
and allows the lamps to switched on when the headlamp is in
VT No. U/M
either low or high beam mode setting.
33-1282 Each
33-1735 Pair VT No. Fits
1997-13 Road King models equipped with auxiliary
33-0083
lamps
Spotlamp
TOURING
33-0172
4¹⁄₂” Chrome Bullet Style Spotlamp Trim

• Held in place by existing headlamp bulb and rim.
VT No. 33-0172
33-0551
33-0546 Installed
33-1198
33-0811
Installed
33-1198
Installed
Spotlamp Trim Ring Set

• Allow installation of visors on 1987-up models, sold as pair. 33-0811
VT No. Item
33-0551 Ring Set
33-1198 Billet Trim Ring Set
42-0202 Visors, pair
Spotlamp Dress Ring

• Features a recessed “frenched” deep design. Also available
with built in visor.
VT No. Type
33-0546 Frenched
33-0811 Frenched with visor
Spotlamp Bracket
TOURING
31-0927
31-1347 31-1348
31-1343
31-1349 31-1350
Fog Lamp Clamps
31-1027 • Clamp on style for 1 1/4" engine bar.
• Sold as a pair.
VT No. OEM Finish
31-1347 68000170 Chrome
31-1348 68000142 Black
31-1349 68000171 Chrome
31-1350 68000141 Black
31-1344
Spotlamp Bracket Kit

• Fits 1996-up FLT-FLHT models.
• Requires the separate purchase of 33-0108 turn signal kit 31-0830 31-0828
and 33-0903 spotlamp.
Chrome Black Item
31-0927 31-1343 Bracket Set 2014-up
31-1027 31-1344 Bracket Set 1997-13 FLT-FLHT models
31-0829 31-0831
31-0833
31-0482 31-0499
Chrome Spotlamp Mount Bracket Spotlamp Eliminator Bracket Set

• One piece type. Use VT No. 33-0010 Spotlamp. Chrome Black Type
VT No. Fits 31-0830 31-0828 Ball Milled
31-0482 1986-up FLHS 31-0831 31-0829 Drilled
Carbon Fiber
37-0552 Spacer for Above
31-0833 Ball Milled
31-0499 1994-01 FLHR, 1997-up FLHT
*Note: Includes brackets which mount to lower pinch bolts.
Spotlamp Bracket Covers
• Feature textured surface and
stepped design. Fits all 1996-13
FLT models. Replaces 68613-01.
31-0311 VT No. 42-0606
Chrome V-Style Spotlamp Bracket

• Replace stock bracket.
VT No. Year Model
31-0311 1986-2001 FLST-FLSTF
Turn Signal
TOURING
33-1440 33-1444 31-0964
31-0964 Installed
Chrome Turn Signal Bracket Set
33-1445 • Mounts as stock. Mount holes are 6³⁄₄” center to center.
33-1441
VT No. Fits
31-0964 FLHR 1997-up Road King Headlamp Nacelle, FLT 1997-13
33-1443 33-1446
LED Turn Signal Sets.

Chrome Black Item
Combo Tail/Turn Signal Lamp
33-1440 33-1444
1989-up FLT
Front Turn Signal, Dual Function
33-1441 33-1445
1996-up FL, Smoke Lens
33-1443 33-1446
Rear Turn Signal, Signal Function Chrome Turn Signal Block Off Bevel Style
1996-up FL, Smoke Lens Plates
• For use when front fairing mounted on the turn signals are
removed or relocated.
VT No. Fits
31-0075 FLTR 1998-up
Auxiliary LED Run/Brake/Turn Lamps 31-0354 31-0230

• Emit a soft neon-like glow when the ignition is on and the cen- Front Turn Signal Relocation Kits
ter row of fast-acting LED lamps burn brightly when the brakes • Fit 1996-up FLT.
or turn signals are activated. VT No. Item
• Mounted in a sealed housing that slips into the opening, and 31-0353 With Spot Lamp Bar
are held in place with the saddlebag support hardware and an
31-0354 Without Spot Lamp Bar
adhesive pad.
• Kit includes left and right lamps and a plug-and-play wiring 31-0230 Turn Signal Bracket 39mm Forks Chrome
harness.
Fits 2014-up FLHTCU, FLHTCUL, FLHTK, FLHTKL and FLTRU
models.
VT No. 49-0004 31-0216
Auxiliary Saddlebag LED Lamp
• Add lighting to the rear of your Touring bike.
• The bright LED lamps glow red when the ignition is on, and Chrome Short Turn Signal Bracket Set
intensify when the turn signals or brakes are activated. The lamps VT No. Fits
act as a supplement to the Tour-Pak® luggage mounted rear 31-0216 FLT 1986-up
lighting. The self-adhesive lamps fit beneath the saddlebag lid.
Kit includes left and right lamps, modulator, and quick-disconnect Chrome Round Turn
wiring harness. Signal Bar
• Fits 2014-up FLHTCU, FLHTCUL, FLHTK, FLHTKL, FLTRU • Include hollow bolts to mount cus-
and 2016-up FLHTKSE and FLTRUSE models. tom turn signals. Fits 1991-04 FLT.
VT No. 49-0003 VT No. 31-0329
Rear Signal Mount
TOURING
33-1177
31-1235
Chrome Blinker Bar Eliminator Bracket is for use without

turn signal. This bar is for use on 1999-08 Touring models
when turn signals have been relocated to the saddlebag
rails. Fills unsightly holes that were originally used for stock
type turn signal bar on fender. Fits 1999-08 FLT, FLHT, 33-1175
FLHR,FLTR.
VT No. 31-1235
33-1480
33-1481
33-3035
33-1178
Bullet Rear Turn Signal Bar and License
Plate Relocation Kit
• Accents the long and lean look of the Touring bike. This com-
plete kit moves your license plate from the support bar to the
Revox Turn Signal Bar
• Fits 2000-17 FLST, 1999-up FLT, FLHT, FLHR
rear fender tail for a true custom look.
2013-up FLHTC, FLHRC, FLHTR
• Includes a bullet turn signal bar with integrated down-lighting
Chrome Black Lens Color
for the license plate, bullet LED turn signals, rear fender tip
and decorative trim to cover the original license plate mounting 33-1175 33-1176 Amber
holes. 33-1177 33-1178 Smoke
Chrome Black Item
31-3987 31-0441
33-1480 33-1481 Kit
31-0865 Bracket Only
33-3035* Kit
*Note: Has bulb type turn signals. 31-9974 31-9929
Chrome Rear Turn Signal Mounts

VT No. Length Fits
31-3987 13” 1985-90 FLHS-FLT
FLTRX Rear Turn Signal Bar Kit 31-0441 8¹⁄₄” 1985-90 FLT
• Bolt-on turn signal bar forms to the contours of the bolt-on 31-9974 9” 1991-up FLT
type that forms to the contours of the rear fender and has a 31-9929 10” 1991-up FLT
smooth, stepped design. 31-0495
31-0517
• Full top coverage eliminates the "grab handle" look of the
OEM turn signal bar.
• Includes two LED bullet signals with red lenses.
• Signals have full run/turn/brake functionality.
Chrome Rear Directional Signal Bar
• Constructed of formed and welded steel which offers the
• Can use stock license plate mount greatest strength against vibration.
• Fits 2010-18 FLTRX, FLHX VT No. Fits Length
VT No. Finish 31-0517 1991-08 FLT-FLHT, 2009-13 FLHTC 8³⁄₄”
33-1049 Chrome 31-0495 1991-08 FLT, 2009-13 FLHTC 13”
33-1000 Black 31-0206 31-1289
33-3040 33-0762
Chrome Low Boyz Turn Signal Bar

• Replaces 68430-89 and is threaded to accept stock turn sig-
V-Shape Rear Turn Signal Kit nals and mounts to license plate bracket holes.
• Fits FLT. VT No. Item Length
• Includes red/amber LED bulb lamps. 31-0206 Bar 12”
VT No. Item
31-0776 Bar Kit 7”
33-3040 Kit
33-0762 LED Lamp Set 37-0561 End Nuts
Tail Lamp
TOURING
33-0832 33-0831 33-1489 33-1490
33-0833
LED Conversion
• Fits 1999-up XL, FXD, FXST, 1996-07 FLT.
VT No. Color
33-0832 Red
33-0833 Smoke
33-0831 Clear
33-1603 33-1603 Installed
33-1491 33-1492
33-1604 33-1604 Installed
33-0831 33-0832
33-1605
33-0833 33-1605 Installed

33-1606
Lamp Lens
• Includes with LED internals.
Stock Laydown, FLT Color
33-0831 Clear
33-1491 33-0832 Red 33-1606 Installed
33-1492 33-0833 Smoke LED Laydown Tail Lamp Assembly.
• Fit 1999-up FLT only.
Lens
VT No. Assembly Tail Lamp
Color
33-1489 33-1603 Red Up
33-1604 Red Down
33-1605 Smoke Up
33-1490 33-1606 Smoke Down
Rail Lamp & Plate Bracket
TOURING
All Frames fit standard
4” x 7” size unless noted. 42-9985
33-0387
33-0389
33-0388
31-0050
33-0392 42-0987 31-0050 Installed
Marker Lamp Light Bar Set

33-0389 Installed • Includes four bullet lamps to fit 1997-08 Touring with stock
rear fender rail and license plate mount.
• Fits 7¹⁄₄” x 4” standard plates.
VT No Item
42-9985 Marker Lamp Light Bar Set
Billet Chrome Tail Lamp & Plate Holder 31-1756 Bracket
• Includes mounting bracket feature LED. Rail mount for 1997- 42-1547 Plate Holder
up FLT models. Note: 42-0987 does not have a lamp.
VT No . Style Item 31-0780
Installed
33-0388 Plain LED
33-0387 Skull LED
33-0389 Diamond LED
33-0392 Slice LED
Lay Down License Plate Bracket
42-0987 Spade None • Fits 1997-up Road King models.
31-0050 Replacement Mounting Bracket for Above VT No Item Fits
License Plate Bar 31-0780 Plate and Bracket 1997-12 FLHR
42-1069 Plate Only 1997-up FLT
Eliminator Bracket Set
• Allows the license plate support
tube to be removed and will still allow
the stock saddlebags support brack-
ets to be used. Sold in pairs.
VT No. 31-1268
31-1006 Installed
Billet License Plate Bracket
• Mounts below tail lamp in existing holes, by removing the
stock turn signal bracket on 1991-08 FLT, 1978-84 FLH.
VT No. Item
31-1006 Plate Holder
Curved License Plate Frame 31-1268 Bracket Set
• With LED lighting for 2010-up Street Glide and Road Glide
models. Chrome frame is designed to replace the Original Chrome License
Equipment black license plate bracket and attaches to the
underside of the rear turn signal bar. Two vertical LED in the
Plate Frame Kit
• Fits 7¹⁄₄” x 4” standard
run mode and are brighter when the brakes are applied.
plates.
• Fits 2010-up FLHX, FLTRX.
VT No. 42-0066
VT No. 33-1494
Mirror
TOURING
34-8218 Installed 34-1221
Chrome Mirror Set

• Offers updated styling as mirrors mount behind fairing at grip
area. Drilling of fairing shell required.
VT No. 34-8218
34-0405 34-1335
34-1222
34-1336 34-1224
Touring Mirror Set

34-1337 • Available with optional LED turn signal set built in.
VT No. Finish Type
34-1221 Black LED
34-1222 Chrome LED
34-1224 Chrome Plain
Fairing Mount Mirror Set

• Fits FLT models.
• Mount inside the “bat wing” style fairing and feature a wide
range of adjustments.
• Mounting template for easy installation
1996-13 2014 Finish/Type 34-0049 34-0052
34-0405 34-0055 Chrome Mirror Block Off Plate Set
34-1335 34-0056 Black VT No. Finish
34-1336 34-0058 Black, Split Vision 34-0049 Chrome
34-1337 34-0057 Chrome, Split Vision 34-0052 Black
34-1736 34-1737
Mini Fairing Mount Mirror Set

Chrome Black
34-1736 34-1737
Horn
TOURING
42-1134 42-1135
Replica Horn Kit
• Includes bracket, ISO mount and cover.
VT No. 33-0798
33-1909
42-1053 42-1179
42-5043
42-1084 42-1182
Chrome Air Horn Kit

• Includes 12V compressor. 150 mm and 195 mm horns.
VT No. Item
33-1909 Horn Kit
42-5043 Cover
42-1194
Horn Covers
• Round and CVO style horn covers with finishes as noted
• Fits 1993-up FLT except CVO models.
VT No. Style Finish
42-1134 Round Spoke Chrome
42-1135 Round Slotted Chrome
42-1053 Hulk Chrome
42-1179 Hulk Black
Chrome Air Scoop 42-1084 Louvered Chrome
• Mounts on left side top motor mount studs on 1991-16 FLT
42-1182 Smooth Round Black
models. Will act as scoop for improved cooling and horn cover. 42-1194 Smooth Round Black Wrinkle
VT No. 42-1010
42-1519
42-1520
Hulk Horn Cover

• OEM# 61300623.
VT No. Finish
42-1519 Gloss Black
42-1520 Chrome
Driver Footboard
TOURING
27-1251 27-1200 27-1201

27-1251 Installed
27-1250
27-1202 Installed
27-1202
27-1250 Installed
27-1752 27-1752 Installed

27-0898 27-0898 Installed 27-0822
Billet Footboard Set.
“D” Billet Footboard Set. • Note: Fits 1980-up FLT and 1986-up FLST
VT No. Shape
• Note: Fit 1980-up FLT and 1986-up FLST
VT No. Shape 27-1200 Diamond
27-1251 Diamond 27-1201 Rail
27-1250 Rail 27-1202 Flame
27-0898 Flame 27-1752 Oval
27-0822 Wave
27-0855 27-0748 27-0990

27-0914 27-0863 Chrome Black Item
Vintage Footboard Sets 27-0855 27-0748 Driver Set with Streamliner Design
• Feature classic half moon design with “shaker” Iso-mount 28-0990 28-0990 Replacement Pad for Above, Right Side
cushion area. Black pads included.
VT No. Fits
27-0914 1980-up FLT with bull's eye pad
27-1015 1980-up FLT with ribbed pad
27-0863 Rail Trim
27-0188 27-0187
Driver Extended Reach Rider Footboard Set
• Features Streamline design.
• Moves floorboard 1" forward.
Black Chrome Fits
27-0188 27-0187 2002-up FLT
Driver Footboard
TOURING
27-0807 27-0808 27-0809 27-0814 27-0944
27-0963
27-0087
27-0021
27-0962
27-0824 27-1236
27-1237
27-1238
27-1209 27-0994
27-1754
27-1767
27-1758
27-1756
Driver Footboard Set
• Fits 1980-up FLT and 1986-up FLST.
Chrome Black Style

27-0807 — Rail 27-0166
27-0808 — Flame
27-0809 — Diamond
27-0814 — Shark Fin
27-0944 — Teardrop
27-0963 — Diamond Big Foot
27-0962 — Big Foot
27-0021 — Slasher
27-0087 — Rocket
27-0824 — Half Moon with rubber
27-1236 — Swiss Cheese, Rectangular
27-1237 — Swiss Cheese, Half Moon
27-1238 — Drilled Half Moon
27-1209 27-1078 Half Moon Holes 27-0167
27-0994 — Oval Design
— 27-1758 Slotted Ball Milled
— 27-1767 Half Moon Slotted
— 27-1754 Oblong Teardrop
— 27-1756 Rectangular with raised rubber areas
27-0166 27-0167 Digi
27-0452
27-1798 — Flame
27-1083 — Perforated
27-0452 — Bolt Set (Zinc)
27-1798 27-1083
Footboard
TOURING
27-0837 27-0837 Installed

Left Side Footboard Heel Guards
• Fit 1986-up FL style boards.
• FLT with stock type footboards only. Will not fit with stream-
line or half moon type footboards.
VT No. 27-0837
27-1527 27-0162
27-1526
Driver Footboard Extender Kit
• Fits Touring. This kit is finished in black to extend footboards
outward by 1¹⁄₄” inches.
VT No. Year
27-1527 1980-08
27-1526 2009-up
27-0163
1” Footboard Extender
• Fits 1993-up FLT. 51-1601 Installed shown
VT No. 27-1235 with 27-1235
27-0811
27-0863
27-0812
28-0381
Half Moon Footboard Set
• Features OE style pads and Iso mounted pads.
27-1726 27-0811
VT No. Finish/Note
Chrome Footboard Mount Set 27-0162 Black
• For FLT is a 4 piece set. Available in stock or +2” forward. 27-0163 Chrome
VT No. Type Finish Year 27-0863 Trim
28-0381 Top Set
27-1726 Stock Chrome 1983-08
27-0811 +2” Chrome 1983-08
27-0812 +2” Black 1983-08
27-0827 Black 2009-16
27-1793 Stock Chrome 2009-16
Footboard Forward Relocation Kit

• Re-mount footboards 1” forward on 1997-16 FLT, FLHTC,
FLHR.
VT No. 27-1539
Footpeg
TOURING
27-0698 27-0033
27-1788
27-0032
27-0034
27-0660
Installed
Chrome Extended Footpeg Mount Kit

For custom application
VT No. Mount Diameter
27-0032 1"
27-0660 27-0033 1¹⁄₈"
27-0034 1¹⁄₄"
27-1452 27-1453
27-0654
27-0587
27-0753 27-0360
27-0892 Footpeg Mounts

• For 1¹⁄₄” front engine bars.
27-0892 Installed • Order pegs separately.
Chrome Black Type
27-1452 Long
27-1453 Short
27-0651 27-0753 27-0360 Highway Bar Mount Set
Chrome Engine Bar Footpeg Mount Kits

• For the mounting of male footpeg sets to 1¹⁄₄” engine bars. 31-0983 31-0933
31-0201 31-0264
• Hardware included.
*Includes footpegs. All other items purchase footpegs separately. 31-0282
For custom application Inspection Tag Holder
VT No. Item • Available in stainless or chrome. Measuring 3¹⁄₂” square with
27-1788 Grooved Black Mount Kit ¹⁄₂” or ³⁄₈” mounting hole which can mount to footpeg or shock
27-0698 Grooved Chrome Mount Kit studs.31-0282 is square type which clamps on to 1” to 1¹⁄₈”
27-0654 Grooved Chrome Mount Kit tube with worm clamp included.
27-0660* Above w/Cats Paw pegs VT No. Finish Type
27-0587* Above w/Railer pegs 31-0201 Stainless .5”
27-0892 Rounded Chrome Kit 31-0264 Chrome .5
27-0651 Basic Kit 31-0933 Black .5
31-0983 Chrome ³⁄₈”
31-0282 Chrome Clamp
Passenger Footboard
TOURING
51-0998
27-0854
51-0853
27-1739
51-0867
Passenger Footboard Sets with Swingarm

Mount Kit
• Includes right & left side chrome pivot caps, passenger footboard
mounts and passenger footboard with rubber pads.
VT No. Footboard Style Fits
27-0977
51-0998 D-Shaped FLT 2007-2008
FLT Passenger Footboard Kit. 51-0853 D-Shaped FLT 1982-2006
• Footboards fold up when not in use. Kit includes footboards and
51-0867 Mini FLT 1982-2006
mounting hardware. Fits all 1993-up FLT models.
Chrome Black Type
27-0854 27-0359 Stock
27-1739 27-0977 Streamline
1993-up FLT Rear Footpeg Kit

• Includes chrome brackets and large soft peg set. Replaces
rear passenger floor guards.
VT No. 27-0578
Chrome Passenger Footboard Support Set 27-2100 27-1059 27-2107
• Feature a design which allows the installation of passenger

footboards. Includes left or right supports, mounting hard-
ware and installation instructions. Note: Required to use with
the passenger footboard support brackets and passenger
footboard, brackets and passenger footboard, available sep-
arately.
VT No. 27-0189 Lion’s Paw Footpeg. Wider style for male peg application.
VT No. Finish
27-2100 Chrome
27-1059 Black
27-2107* Chrome
*Note: VT No. 27-2100 & 27-1059 feature allen thru bolt that
allows peg to be rotated to correct position for maximum com-
fort. 27-2107 does not have same feature.
Passenger Footboard
TOURING
27-0164
27-0165
27-0229
27-0703
27-0495
Passenger Footboard
VT No. Item
27-1550
27-0164 Digi Cut, Chrome, 1993-up
27-0165 Digi Cut, Black, 1993-up Passenger Footboard Set
27-0495 Black Edge, 1996-up VT No. Style
27-0229 Rubber Pad, Fit 1997-up FLT.
27-0703 Diamond, Fit 1993-up FLT
27-1550 Stock, Fit 1993-up FLT
27-0834
27-0022
Billet Rear Passenger Footboard Set
• Fit 1986-up FLT models. Chrome insert features inlay rubber
pad.
VT No. Type
27-0834 Rail Slasher Style Chrome Billet Passenger
Footboard Set
• Features CNC machining, removable anti-vibration damp-
ers and a unique shape. Fit 1984-up FL.
VT No. 27-0022
Passenger Streamliner Style Footboard Set

• Includes rubber inserts. Order pins separately. Black finish.
Fits 1993-up FLT.
VT No. 27-1762
28-2148
28-2120
Stock Black Rubber Passenger Footboard

• Fits factory passenger floor boards.
• 1987-up FLT.
VT No. Style
28-2120 Block, pair
28-2148 Ribbed, each
Chrome Passenger Footboard Set
• Without rubber inserts. Accepts black passenger footboard
mat black, OEM #50606-86A, and passenger footboard pin kit,
OEM #50933-86.
VT No. 27-0016
Passenger Footboard
TOURING
27-0693
27-1549 27-1458
27-0803
27-0864 27-1456
27-1984
27-0815
Streamline Passenger Footboard Set
VT No. Item
27-1549 Board Set, Chrome
Chrome Replica Passenger Footboard Set 27-1458 Board Set, Chrome Trim with black bottom
• Fit all OE style brackets and will accept rubber pads from 27-1456 Board Set; order pins separately
1986-up. 27-1984 Chrome Set without rubber
VT No. Item 27-1135 Rubber Inserts
27-0969 Board Set Only
27-0750 Board Set, Chrome
27-0693 Flame
27-0815 Board/Rubber
27-0803 Pin Set, Fits OE
27-0864 Pin Set for 27-0500
27-1125 27-1126
Black Rear Passenger Footboard Set

• Without rubber inserts.
• Fits 1993-up FLT. 27-1123 27-1124
VT No. 27-1761
27-1746
27-1599 Rear Footboard Set
Chrome Black Item
27-1125 27-1126 Block Passenger Footboard Kit
27-1123 27-1124 Ribbed Passenger Kit
27-1549 — Streamline, FLT 1993-up
27-1456 — Streamline, FLT 1993-up
— 27-1762 Streamline, FLT 1993-2010
Chrome Passenger Footboard Cover Set
• Fit fold up type factory cast boards.
• Includes 2 covers with 4 self tapping screws.
VT No. Item
27-1599 Cover Set, 1987-up
27-1746 Cover Set, 1987-up
Passenger Footboard
TOURING
27-0564
27-0561 Installed 27-0561

27-0362
Male End Mount Adjustable Footpeg Kit
• Features rubber rails. Included an adjustable mount bracket.
Chrome Black
27-1130 27-0564 27-0362
27-1129
Non-Adjustable Footboard Supports
• Add the comfort and conveniences of passenger footboards
to your Touring motorcycle. These supports are designed to
allow installation of tradition D-shaped, Swept Wing, Tapers or 27-0517
OldStyle Passenger Footboards (sold separately) on Touring
models. Kit includes left and right supports and installation hard-
ware. Add your choice of passenger footboard pan design and 27-0517 Installed with
27-1586
footboard insert to complete your custom look. *Note: Does not
include hardware. 27-1796
• Fits 1993-up Touring and Trike models
Chrome Black
27-0561* 27-0616 27-0440 27-0441
27-1129 27-1130
Passenger Footpeg Mount Bracket Set
• Fits FLT 1993-up
• Adjusts to 3 height positions.
• Replaces stock rear footboards.
• Order male pegs separately.
Chrome Black Item
27-1522 27-1522 Adjustable 27-0517 27-0361 Peg Mount
Adjustable Passenger Footboard Mount Kit 27-0440 27-0441 Mini Board
• Maximize your passenger's riding comfort. These chrome 27-0831 Footboard Mount Kit
5-position adjustable mounts raise and lower the passenger Fits FLH 1993-up
footboard. The lowest position is 2.0" forward from stock, 27-0363 27-1796 Peg Mount
and the highest position is 2.5" higher than stock. Easy to
adjust with a common hex wrench. Kit includes left and right
adjustable support assembly and all required mounting
hardware. Footboard pans and inserts sold separately.
Fits 1993-up Touring models. Does not fit Trike models.
Chrome Black Year 27-1523
27-1522 27-0831 1993-up Touring Installed
27-1523
27-1128 Chrome Adjustable Passenger Footpeg
27-1127
Mount Kit
• Helps maximize your passenger's riding comfort.
• These adjustable mounts raise and lower the passenger
footpeg to accommodate taller and shorter passengers.
• Easy to adjust with common tools, the mount adjust through
a 360° range (depending on model), allowing both fore and aft
Reduced Reach Passenger Footboard and up and down height adjustment.
Mount Kit • Kit includes left and right adjustable support assembly and
• Raises the height or your passenger footboards by approxi- require mounting hardware. Footpegs sold separately male
mately 2.25" for increased passenger comfort. Especially desir- pegs and has a chrome finish. This mount kit will raise or
able on 1997-up Touring models due to frame and saddlebag lower pegs through a 360° range depending on the model and
guard change. Includes mounting hardware. Footboard pans also lift up and down for height adjustment for taller or shorter
sold separately. Fits 1993-up Touring models. Does not fit Trike passengers. Not for rider position.
models. Does not fit saddlebag guard bags. Fits models with male mount-style passenger footpeg sup-
Chrome Black ports. Does not fit rider position.
27-1127 27-1128 VT No. 27-1523
Handlebar
TOURING
25-0761
25-0728
25-0761
25-0980
25-0762 Ape'd Bagger Handlebar

• For Fairing models.
• Fits 2007-15 FLT
Chrome Black Size
25-0728 25-0980 15”
25-0762
25-0729
25-0762
Rhino Bagger Hanger Handlebar 25-0981

• For Fairing models.
• Fits 2007-15 FLT
Chrome Black Size
25-0761 25-0762 10” Hook Bars
25-0763 25-0764 13” • Available in black or chrome.
25-0765 25-0766 14” Note: 2008-13 style accept “throttle by wire” right side grip.
Chrome Black Rise Fits
25-0728 25-0732 15”
25-0729 25-0981 12” 2008-13
25-0767 25-0768 17”
Handlebar
TOURING
25-0152
Wyatts Z'd 1¹⁄₄” Bars

• Fit 1982-up FLT including FLHX. Fits models with or without
fairings.
Chrome Black Rise Fits
25-0143 25-0150 10” 2008-13
Road 25-0144 25-0151 12” 2008-13
Glide Bars 25-0145 25-0152 14” 2008-13
25-2276
1¹⁄₄” Road Glide Bars for 2008-14

Chrome Black Size
25-0134 25-0135 10”
25-0136 25-0137 12”
25-0138 25-0139 14”
25-0140 25-0141 16”
25-3251
Bagger Z Bar
• Feature set back to accommodate fairing. Note: 2008-up style
accept “throttle by wire” right side grip.
• 1¹⁄₄” diameter
Black Chrome Height Description Fits
25-2276 15” with Indents & TBW 2008-13 FLT
25-3251 15” with TBW 2008-13 FLT
Z'd Ape Bar
• 1¹⁄₄” Touring Ape Hangers with welded top corners.
• Made from 1¹⁄₄” diameter tubing but are 1" at riser mounting
area.
• Can be used with stock risers and throttle controls.
• Bars feature a welded top corner from Z-bar look but have full
radius bends at riser mounting area. Dimpled for wiring. T
• Center width of 9 1/2” pullback of 7” and are 36” wide at grip
ends. Include pull string installed for easier wiring.
• Fits 2008-13 FLT will not fit FLHT or FLHX models. FLHR Handlebars
• Available with 12”, 14”,16” and 18” rise. • For stock replacement on FLT with a 2" knurled center
spacing and are drilled for wiring. Do not include air reservoir/
Chrome Black Rise
schrader valve for air ride front forks
25-0472 25-0476 12” VT No. OEM Size
25-0474 25-0477 14” 25-0794 56964-07 9”
25-0471 25-0475 16” Full Bars for Road Glide 2015-up Bars are 1¹⁄₄” at clamp area.
25-0469 25-0470 18”
Handlebar
TOURING
25-0947
11”
25-1158
19”
25-0948
25-1839
14” 25-1276
Dresser Ape Hanger

• 1¹⁄₄” diameter
25-1825 Chrome Black Height Description Fits
25-1158 25-1150 11” With TBW 2008-13
25-0995 25-0982 13” Ape Style w/TBW 2008-13
25-1129 25-1276 14” With Indents 1982-07
25-1159 25-1277 14” With TBW 2008-13
25-1838 25-1844 16” With TBW 2008-13
25-1839 25-1845 19” With TBW 2008-13
25-1161 — 19” With TBW 2009-13
25-1825
25-0502
Installed
Bagger Ape Style Bar

• Fit 2014-up, 1¹⁄₄” round
Chrome Black Rise to Center
25-0446 25-0501 12”
25-0447 25-0502 13”
25-0448 25-0503 14”
25-0449 25-0504 16”
Adjustable Ape-Hanger Bar 25-0450 25-0505 18”
• Features a built in bolt which is in a track to allow fore and aft
adjustment. Bars bolt directly to bushings in triple tree, no risers
needed.
• 1¹⁄₄” diameter 25-1842
Chrome Black Height Fits
25-0947 25-1825 12” 1980-83, 1984-13 FLT
25-0948 25-1826 14” 1980-83, 1984-13 FLT
25-0949 25-1827 15” 1980-83, 1984-13 FLT 25-1843
Poly Urethane
1¹⁄₄” Chrome Handlebars
Riser Bushing Set • With 10” rise and indent for external wiring.
• Includes 4 bushings with • Fits 1986-2013 FLH
chrome covers.
VT No. Type
VT No. Fits Year
25-1842 Curved
28-2259 FLT 1983-13
25-1843 Bathtub
Handlebar
TOURING
25-0875
25-1840 25-0988
2008-up Throttle End

25-0794
25-1841 25-0994
25-0876
25-0989
Replica Handlebar
• 1” diameter
Black Chrome Rise Description Fits
Replica Handlebars
25-0875 6” 1982-07 FLT
w/Indents
Glider Handlebar
25-1840 8” 1986-13 FLH
w/o Indents
Replica Handlebar
25-0665 8¹⁄₂” 1982-07 FLT
w/Indents
25-0979
Replica Handlebar
25-0794 9” 1982-07 FLT
w/Indents
Glider Handlebar
25-1841 9” 1986-13 FLHT
w/o Indents
Vintage Handlebar
25-1835 9” 1986-13 FLHT
w/o Indents
Replica Handlebar 25-0991
25-1279 25-0876 9¹⁄₄” 2008-13 FLT
with TBW
25-2282
25-2284 25-0991
25-1124
1¹⁄₄” Bars
1¹⁄₄” Ape Hanger Bars
• Feature tapered design at the hand control area to allow the • Fit FLT models and feature set back to accommodate fairing.
use of custom or OEM controls (including hydraulic clutch). Note: 2008-13 style accept “throttle by wire” right side grip.
Chrome Black Rise Description Fits
• Bars are also notched for throttle by wire applications.
• Available in black or chrome finish. 25-0988 3¹⁄₂” Without Indents 2008-13
Black Chrome Rise 25-0994 12” With Indents 1980-07
25-2284 25-1124 11” 25-0989 25-0979 15” With Wiring Holes 2008-13
25-2283 25-1125 14” 25-0786 25-1280 16” With Indents 1982-07
25-2282 25-1126 17” 25-0991 25-0978 16” With Wiring Holes 2008-13
Handlebar
TOURING
25-0186
2015-up FLTR 1-1/4" Tall Boy Handlebar
• Accepts internal wiring. **Note: For reference, original bars 25-0186 Note: Road Glide Bars Full Bars are full 1¹⁄₄” diameter
on 2015-up FLTR is OEM #55800332 and is 9" tall. Fits 2015- at clamping area. Knurls are 3¹⁄₈” apart center to center.
up. FLTR.
Chrome Black Size Type
25-0183** 25-0193 12” OE Type
25-0184 25-0192 14”
25-0185 25-0194 16”
25-0189
2015-up FLTR 1¹⁄₄" Rhino Handlebar

• Features a 15" rise to center and accepts internal wiring.
*NE: Additional components required, must be ordered sepa-
rately. **NOTE: For reference, original bars on 2015-up FLTR is
OEM #55800332 and is 9" tall. For Fairing models.
Chrome Black OEM Size Type
25-0186 25-0190 14” 20272
25-0187 25-0189 12” 20272A
25-0188 25-0191 55800332 16” 20272D
Touring Riser Clamp features a forged billet

construction and includes 1 piece base and top
with 1/2" x 13 threads in the base. Fits 2008-up
FLT. 1 1/4 bars at clamp riser area.
VT No. 25-0931
36-0790
36-0791
FLTR ChiZeled Z-Bar Handlebar
• With Indents.
Black Chrome Size Type 36-9871
25-1802 25-0180 14” OE Type
25-1801 25-0181 12” Throttle By Wire
25-0182 16” 35-9871 Throttle by Wire Replacement Tube Only
25-0180 Note: Road Glide Bars Full Bars are full 1¹⁄₄” diameter 36-0790 Throttle Assembly 2008-15
at clamping area. Knurls are 3¹⁄₈” apart center to center. 36-0791 Throttle Assembly 2016-up
Riser
Touring Riser
TOURING
25-0985 24-1155
Touring Riser Clamp

• Features a forged billet construction and includes 1
piece base and top with 1/2" x 13 threads in the base.
• Fits 2008-up FLT. 1 1/4 bars at clamp riser area.
VT No. 25-0931
25-0987
Risers
36-0790
VT No. Item Year
25-0985 Riser Set 1988-08
36-0791
24-1155 Riser Top 2008-14
25-0987 Riser Kit 1988-up
Risers and Clamps. 36-9871

VT No. OEM Fits Type
25-2228 55918-08 2005-14 Top Throttle By Wire
25-2229 55900071 2015-up Top 35-9871 Throttle by Wire Replacement Tube Only
25-2230 55900078 2015-up Lower 36-0790 Throttle Assembly 2008-15
25-2233 2008-14 Riser 36-0791 Throttle Assembly 2016-up
Handlebar Accessory
Chrome Electronic Device Holder
• Mounts to left side control clamp on 1996-up
models.
VT No. 31-1233
Universal Cigarette Lighter

39-0785 39-0786 39-0788 • Available for panel mounting.
VT No. Finish
Chrome Billet Handlebar Assemblies fit ⁷/₈” or 1” handlebars.
33-0561 Chrome
VT No. Item
33-0562 Chrome with bracket
39-0785 Clock, ⁷/₈” or 1” Weighted End Inserts fit the inner diameter of 1”
39-0786 Outside Temperature Gauge, 1” handlebars to reduce vibration at bar ends. Inserts
39-0788 Clock with glow in dark hands, ⁷/₈” or 1” are made of brass.
VT No. 28-0629
12V Receptacle for cell phone, MP3 player or
lighter. VT No. 32-0845 How Bars Are Measured
28-2124 Handlebar Riser Damper Kit

• Includes all rubber bushings, threaded
studs(except where noted), washers and
cups.
VT No. Fits
25-2125 1984-13 FLT
Cloth Patches
TOURING
48-0368 48-0369 48-1208 48-1324 48-1326

48-0206 48-0208 48-1163
48-0472 48-0743 48-1327
48-0930
48-1325
48-0207 48-0214 48-1339 48-1340
48-0483
48-1343
48-1334
48-1333
48-1332 48-1335
48-1328 48-1329 48-1330 48-1336 48-1338 48-1341
48-1337
48-1358
48-1348 48-1357
48-1347 48-1350 48-1354 48-1355
48-1342
48-1359 48-1432 48-1472 48-1475 48-1476

48-1361 48-1362 48-1478 48-1480
48-1479
48-1481 48-1492 48-1493 48-1671 48-1677

48-1482 48-1486 48-1485 48-1487 48-1489
48-1523 48-1678
48-1603
48-1604 48-1605 48-1637 48-1641
48-1531 48-1642 48-1961
48-1650
48-1764 48-1787 48-1649
48-1780 48-1676
48-1783
48-1772 48-1781
48-1785 48-1786 48-1805 48-1819 48-1889 48-1890 48-1962
48-1968 48-0544
48-1972
48-1973 48-1974 48-2288
48-1975
48-1978 48-2289 48-2290 48-2291
48-2296 48-2297 48-2307 48-2308 48-2309

Cloth Patches can be ironed or sewn on. Sold as a pair unless noted. 48-2311 48-2310
48-0206 Webco 48-1337 Corbin-Gentry 48-1482 Lodge Spark Plug 48-1678 Motorcyclepedia Museum 48-2176 Hunt Magneto Shape
48-0207 V-Fire 48-1338 Wyatt Gatling 48-1483 DuCoil 48-1676 Carb OKO 48-2187 Hudson Valley Riders
48-0208 Indian Larry 48-1339 Pope 48-1484 POSA Fuel 48-1764 Oilzum 48-2288 Akront Rim
48-0214 Troxel 48-1340 Super X 48-1485 McCulloch 48-1772 Joe Hunt Early 48-2289 Stelling & Hellings Co
48-0229 Schwinn 48-1341 Yale 48-1486 Daytona Race 48-1777 Avon Mud Plugger 48-2290 Klieg Newburgh
48-0368 Sifton Handshake 48-1342 Iver Johnson 48-1487 KLG 48-1780 Matchless 48-2291 Hudson Valley AMCA
48-0369 AEE 48-1343 Linkert Air Dam 48-1488 Speed Industry 48-1781 York Drive Train 48-2292 Vertical Magneto 48-2318
48-0472 Joe Hunt Rectangle 48-1346 VL Spark Plug 48-1489 CZ Motorcycle 48-1782 1964 World’s Fair 48-2293 Superior Dixie
48-0483 Servi-Car 45" Restoration 48-1347 V-Twin Customizer 48-1491 Stromberg Carb 48-1783 Square V-Twin Mfg. 48-2294 NYS License Plate
48-0544 Tedd Cycle, 1969 48-1348 Servi Cycle 48-1492 Dover Drag 48-1785 National Custom Cycle 48-2296 Angola Roller Rink
48-0634 Shovelhead 48-1349 Hap Jones 50 years 48-1493 Montgomery Drag 48-1786 Hurst 48-2297 Oilzum Bike
48-0743 Gary Bang 48-1350 British Patent Tag 48-1494 Hallcrafts 48-1787 Flanders 48-2298 Triangle Chicago
48-0930 Purple Heart 48-1354 Hap Jones Tank 48-1515 Bobber 48-1788 Indian Time Line 48-2300 Vincent
48-0946 Sifton Pack 48-1355 World’s Fair 48-1523 Rowe 48-1803 Carburetor CV-40 48-2301 Visco Motor Oil
48-1064 Knucklehead Wings 48-1357 XLH 1000 48-1531 Wall of Death 48-1805 Eclipse Mfg. 48-2302 Police Eagle
48-2314
48-1163 Knucklehead 48-1358 Anderson Supply 48-1533 Oil Fill 48-1819 Motorcylepedia 48-2303 Penton
48-1187 Knucklehead 48-1359 Stewart Warner 48-1603 Burkhardt Magneto 48-1884 McGoodies 48-2304 Norton
48-1208 Sifton 48-1360 FLH 1200 48-1604 SAE 60 Weight Oil 48-1882 Sam Arena 48-2305 Well Made In Taiwan
48-1248 Jerry’s Indian Timeline 48-1361 V-Twin Square 48-1605 Johnson Motors 48-1889 V-Twin Motor Service 48-2306 Wico
48-1324 Buco 48-1362 Newburgh Lumination 48-1634 Motorcyclepedia Round 48-1890 International Car Show 48-2307 Washington’s Headquarters
48-1325 Bates 48-1384 Stewart Warner 48-1635 Iver Johnson Round 48-1891 Sifton Cam 48-2308 Delivery Stamp
48-1326 Beck 48-1432 Cycle Shack 48-1637 45 WL Army 48-1961 Doering Spark Plug 48-2309 1000 XLCH
48-2313
48-1327 Sifton 48-1472 Motorcyclepedia QR 48-1638 Champion Frame 48-1962 Orange County, Newburgh, NY 48-2310 Alphabet Exhaust
48-1328 R Racing 48-1474 Thor 48-1641 V-Race 48-1968 Tedd Cycle 48-2311 1913 Motorcycle Stamp
48-1329 H Racing 48-1475 Motorcycle Museum 48-1642 Beck 18mm Spark Plug 48-1972 Drain Oil 48-2313 Motor Patrol
48-1330 BSA 48-1476 Hellings Hollywood 48-1649 Lockhart 48-1973 Made in America 48-2314 Pit’s Wall of Death
48-1332 Split Dorf Plug 48-1477 Delco Remy 48-1650 Tracy Products 48-1974 FLH 48-2318 Avalon
48-1333 Replica V-Twin Shield 48-1478 Guide Cycle Ray 48-1651 Velocipede 48-1975 KHK 48-2319 No One Has...
48-1334 True to Original 48-1479 Hastings Rings 48-1671 New York State Overdrive48-1977 Motorcyclepedia Spark Plug 48-2320 New Parts Slogan 48-2292
48-1335 V-Twin Product Sign 48-1480 Stewart Warner 48-1677 Winged Wheel 48-1978 Anderson Crash Helmet
48-1336 V-Twin Motor Shop 48-1481 B and M Shifter 48-1672 Motorcyclepedia Wing 48-2123 Whizzer Sold as a pair except where noted .
Handlebar Control
TOURING
22-0883 22-0881
22-0818
Chrome Control Kit for 1996-07

Models & Description Bore Without wiring • Features a hidden underside mounting on the switch housings
for an unobstructed smooth, rounded surface on top housing.
96-07 FLT Dual Disc with radio ¹¹⁄₁₆” 22-0883 • Switch housings use stock or chrome 1996-06 switches.
96-07 FLT Dual Disc w/radio & cruise ¹¹⁄₁₆” 22-0881 Available in complete kits with or without chrome switches.
08-13 FLT Dual Disc with radio 15mm 22-0880 Complete kits include clutch and brake levers, master cylinder,
switch housings, brackets and hardware.
08-13 FLT Dual Disc with radio & cruise 15mm 22-0882
Without
With Switches Type Disc
Switches
22-0881 22-0818 (.687) ¹¹⁄₁₆” MC Dual
26-0405
26-0747 26-0181
26-0402 Chrome Handlebar Control Cover Kits
• Include master cylinder cover, clutch mount and two clamps.
VT No. Model Disc
26-0747 2008-13 FLT without hydraulic clutch Dual
26-0181 1996-07 FLT Dual
Chopped Handlebar Master Cylinder and
Control Housing Set
• Fits 1996-17 FLT without cruise radio controls
With Without
Years Disc Size
Switches Switches Chrome Handlebar Control Kit
26-0410 26-0402 1996-05 Single ⁹⁄₁₆” • Includes master cylinder for clutch and brake, banjo bolts and
26-0411 26-0405 1996-04 Dual ¹¹⁄₁₆” levers.
— 26-0406 1996-04 Dual ¹¹⁄₁₆” w/Radio VT No. Fits OEM
FLT/FLHT
26-0455 2014-16 FLT 41700263C
— 26-0407 1996-04 Dual ¹¹⁄₁₆” w/Radio
FLHT
31-0519 34-9158 34-1968

Mirror Mount Block
• Fits 1996-2007 handlebar master cylinder to allow use of cus-
tom mirrors with larger than stock stem by moving the mirror
stem up and out from the master cylinder.
Handlebar Control Kit VT No. Item
• For 2008-13 31-0519 Right
Includes brake master cylinder with a 15mm bore and wire 34-9158 Right and Left
switches for dual disc models with audio and cruise control. 34-1968 As Above, Black
Matte
Chrome Fits
Black
22-1170 22-1169 2008-13 FLT w/radio and cruise control
22-1172 22-1171 2008-13 FLT w/radio only
TOURING
Handlebar Control
26-0765
32-0276 32-0277
Handlebar Control Switch Housing Kit
VT No. Item
32-0276 Chrome with chrome switches
32-0277 Chrome with black switches
32-0278 Black with black switches
32-0279 Black with chrome switches
26-0452
26-0455
2008-16 Chrome Clutch Handle Assembly
• Includes mount bracket, clamp and handle assembled.
VT No. 26-2207
22-0583
23-9426 23-9425
Chrome Clutch Master Cylinder Cover
VT No. OEM Year
23-9426 37000278 2017-up FLHXXX
23-9425 41700442 2017-up FLT
26-0997
Handlebar Control
• 2014-up
Chrome Black Fits
26-0765 26-0768 Hand Lever Set for 2014-up
Handlebar Master Cylinder Rebuild Kit 26-0452 — Switch Housing Set for 2014-16 FLT
• Fits 2006-up models with hydraulic clutch handle OEM# 26-0455 — Clutch & Brake Master Cylinder Kit 14-16
42862-06B. 22-0583 — As Above with Switch Housing
VT No. 26-0997
23-0857 — Brake Master Cylinder Rebuild Kit
Chrome Electronic 23-0872 — Clutch Master Cylinder Rebuild Kit
Device Holder
48-1714
• Mounts to left side control
clamp on 1996-up models.
VT No. 31-1233
Cell Phone Mount Black Leather Accessories

• Made of black ABS
construction and features VT No. Description
adjustable ball-socket swivel 48-1714 Lever Covers with 16” fringe
mount. • Mounts to right or
left side hand control perch.
VT No. 48-0842
1982-up Hand Lever
TOURING
26-2178 26-0788
26-0536
26-0984 26-0789
Chrome Handlebar Control Cover Set.

• Includes clutch lever bracket, handlebar control clamps, mas-
ter cylinder top and body cover, and hardware for complete
26-0741 26-0981 installation.
VT No. OEM Disc Year
26-0536 46098-98 Single 1996-2005
26-0895 26-2113
26-0527 26-0528 26-2133 26-0532
26-0763 26-0762
26-0531 26-2153 26-2136
Clutch and Brake Levers.
• Available in polished or chrome. Sold individually.
Chrome Polish OEM Years Type
26-0765 26-0940 26-0527 26-0528 45016-72 1972-81 Brake
26-0517 Power 1972-81 Brake
26-0531 26-2136 45017-82 1982-95 Clutch
26-2133 45017-88 1988-95 Clutch
26-0532 45016-82 1982-95 Brake
26-0768 26-0326
Contour Lever Sets.

• Fit Touring models. 26-0325
26-0117
Chrome Black Year Type Chrome Black Type Year
26-2156 — 1985-95 Skull Girder Style 26-0117 2008-up
26-2178 — 1996-07 Smooth 26-0004 26-0005 Smooth Wide 2017-up
26-0788 26-0984 1996-07 Drilled 26-0006 26-0008 3-Slot Wide 2017-up
26-0789 — 1996-07 Slotted 26-0325 26-0940 Smooth Wide 2014-16
26-0741 26-0981 2007-13 Smooth 26-0009 26-0010 3-Slot Wide 2014-16
26-0895 26-2113 2008-13 Slotted
26-0763 26-0762 2008-13 4 Hole
26-0765 26-0940 2014-16 Smooth
26-0325 26-0768 2014-16 Smooth
26-0798 26-0799 2014-16 Vortex 26-0798 26-0799
26-0800 26-0801 2014-16 3 Holes
Hand Lever Set.
26-0803 26-0806 2014-16 Slotted
26-0804 26-0807 2014-16 4 Holes Chrome Black Style
26-0802 — 2014-16 OE Style, Slot 26-0798 26-0799 Vortex Lever Set
26-0326 — 2017-up Slotted 26-0800 26-0801 Drilled Lever Set
Handlebar Grip
TOURING
28-0857 28-0891 28-0988 28-0856 28-0846 28-0645

28-0298
28-0654 28-0640 28-0664 28-0926 35-9871
Handlebar Grip Sets 28-0934 28-0935

• For Touring models 2008-up
• Feature the built in serrations in the throttle side to twist the
“TBW” throttle by wire electronic throttle assembly.
VT No. Style
28-0298 Banded
28-0857 Flame
28-0891 Chrome Dome, 2008-up
28-0988 Swiss Cheese, Billet
28-0856 Vintage
28-0846 Stock Replica
28-0645 V-Tech 28-0934 Installed 28-0935 Installed
28-0654 Eagle Passion Donkey Handlebar Grip Set
28-0640 Tornado • With chrome end caps.
28-0664 Slasher VT No. Type
28-0926 Black Cobra 28-0934 Dual Cable
35-9871 Tube 28-0935 TBW
28-0241 28-0242 28-0243
48-0209 48-0210 48-0211
28-0244 28-0663 28-0462
48-0215
48-0216 48-0217
48-0225 48-0226
Handlebar Grip Sets Ande Rooney H-D Signs and Magnet
• 2008-up Touring TBW VT No. Item
VT No. Style/Finish 48-0209 H-D At Your Service Tin Sign
28-0241 Plain, Chrome 48-0210 H-D Freedom Green Tin Sign
28-0242 Shot Peened, Chrome 48-0211 H-D 1923 F-Head Twin Tin Sign
28-0243 Black with cut 48-0215 H-D Bar and Shield Die-Cut Tin Sign
28-0244 Stealth Tone Black 48-0216 H-D Built for Comfort Die Cut Tin Sign
28-0663 Black Grained
48-0217 H-D Freedom Riders Die-Cut Tin Sign
28-0637 Soft Set
28-0462 Rib Grip, 1984-2017 48-0218 H-D Quality Tin Sign
28-0461 Profile Barrel Grip Set Black, 1984-2017 48-0225 H-D Vintage Iron Motor Oil Tin Sign
TBW Handlebar Plug. 48-0226 H-D Wings

Fits 1985-2007 FLT. 48-0212 H-D Bar & Shield Die-Cut Magnet
VT No. 25-0821 48-0213 H-D Patented Die-Cut
Magnet
Handlebar Wiring
TOURING
32-0364
32-0367
32-6660
32-0368
32-0366
Chrome Inner Fairing Switch Kits 32-6663
VT No. Item
Rocker Switch Kit Chrome Set of 2. Cruise/Assy w/ 32-6662
32-0364 Harness & Connector 2008-up FLHX OEM 70219-
08CP
Rocker Switch Kit Chrome set of 3. Cruise/Accesso-
32-0366
ry/Spot Lamp 2004-16 FLHT/C OEM 70278-04CP
Rocker Switch Kit Chrome Set of 2. Cruise/Accesso- 32-6652
32-0367 ry with Harness and Connector. 2004-up FLTR OEM
71625-04CP
Rocker Switch Kit, Speaker with Harness and Con-
32-0368
nector. 1998-03 FLTR OEM 71655-98CP 32-6653
32-7017 32-7016
32-7015
32-6654 32-6655
32-7018
Backlit LED Inner Fairing Switches

Black Chrome Fits Included Switch Type
32-7014 32-7019 1998-up FLHTCUI Cruise, Accessory, Spotlamp,
Speaker 32-6680 32-6686 32-6651
32-7015 32-7020 2008-up FLHX Cruise & Accessory Handlebar Wiring Extension Kits
32-7016 32-7021 2006-2007 FLHX Accessory Switch
Fits 1996-06 FLT, FLHT (12 Wires per side)
32-7017 32-7022 1998-2003 FLHTC Spotlamp & Accessory
32-7018 32-7023 2004-16 FLHTC Cruise, Accessory & Spotlamp 32-6660 +4” Extension
32-6662 +12” Extension
Fits 2007-13 FLHT, FLHR, FLHX, FLTR
(12 Wires right/14 left)
32-7814 32-7823 32-7832 32-6653 +8” Extension
Extended Handlebar Wiring Harness Kit 32-6655 +15” Extension
VT No. Fits Fits 2007-13 FLHT, FLHR, FLHX, FLT (17 Wires, Note:
32-7814 1996-2006 FLT Does not include wires for radio, CB or throttle controls).
32-7823 1996-2006 FLT with factory radio 32-6680 +4” Extension
32-7832 2009-2012 FLT with electric throttle 32-6682 +8” Extension
Fits 2014-up FLHT, FLHR, FLHX
Throttle by Wire Extension Harness Kits Throttle by Wire Handlebar Wiring Extension Kits include
• “TBW” extension wires will plug in to the existing 6 position factory type connectors for easy assembly.
Molex connector. These wire extensions will not cause interfer- VT No. Length Fits
ence to motorcycles computer when installing taller handlebars. 32-6651* One Size 2008-13 FLHT, FLHT, FLHX
• Fits 2008-13 FLT. 32-6687* One Size 2014-15 FLT
VT No. Extension 32-6688 +8” 2016-up FLT, FXST, FLST
32-1205 +4” 32-6689 +15 2016-up FLT, FXST, FLST
32-1206 +12” *Note: 18” Extended Throttle by Wire Harness Only
Switch
TOURING
26-2253 26-2254 26-2256

Chrome Switch Housing Kit
32-0564 32-0581 32-0563 Includes press on chrome switch caps for easy installation.
VT No. Model
26-2253 1996-2013 FX-XL-FXD-FLHR without cruise control
26-2254 1996-2013 FLHT/C/I
26-2255 1996-up FLHTCUI, FLTRI
26-2256 2002-up FLHRC/I
32-0562 32-0565
32-1129 32-1130 32-1131

32-1093 32-1092 32-1091
32-1132 32-1133 32-1134

32-1094 32-1095 Chrome LED Backlit Rocker Switch Kits
• With 60" wires
Switch Cover Set
• Snap on covers replace existing black switch covers. VT No. Fits Function
• Available in chrome or gold. 32-1129 2007-16 FLT With Radio
32-1130 1996-06 FLT With Radio
Gold Chrome Fits 32-1131 2007-up FLT With Cruise Control
1996-13 FLHTCU (Ultra Classic Electra 32-1132 1996-06 FLT With Cruise Control
32-1093 32-0564 32-1133 2007-up FLT With Radio and Cruise Control
Glide) 1996-13 FLTR (Road Glide)
1996-13 FLHT (Electra Glide Standard);
32-1092 32-0563 1996-13 FLHTC (Electra Glide Classic)
without cruise control
1996-13 FLHR (Road King),1998-13
32-1091 32-0562
FLHRCI (Road King Classic)
32-1094 32-0565 2002-13 FLHRCI (Road King Classic) with
cruise control
32-1526
32-1095 32-0581 1996-13 FLHT, FLHTC, 2010-11 FLHX
without cruise control
32-1525
32-1242 2014-15 FLT

32-1243 As Above with black
2016-up FLHTCU, FLHTCUL, FLHT-
26-0846 CUTG, FLHX, FLHXS, FLTRU, FLTRX,
FLTRXS
32-1534 32-1528
32-1320 32-1321
32-1529
32-1322 32-1323 Chrome Handlebar Switch Kit.

VT No. Years Type
Turn Signal Extension Cap
• For 2016-up 32-1525 2007-16 With Radio
Chrome Black Fits 32-1526 2007-16 With Radio/Cruise Control
32-1534 2007-16 As Above with black switches
32-1320 32-1321 FLHR
32-1528 1996-06 With Radio/Cruise Control
32-1322 32-1323 FLHT, FLTR, FLHX, FLH
32-1529 1996-06 With Radio
Tool
TOURING
16-0011 16-0003
16-0017 16-1265
Ignition Switch Tools

VT No. Fits
16-0003 2003-13
16-0017 2003-13
16-1265 2014-up
16-1610 in use!
16-1610
16-0098
Saddlebag Latch Rivet Tool

• Gives secure fastening of rivets while providing a clean look
VT No. 16-1610

VT No. OEM Length
37-0566 90965-63 5/16”
37-0567 90966-67 1/4”
37-0568 90967-64 3/8”
16-1070 16-0850
16-0857
DIY Touring Tool Kit
• For 1999-2013 models will fit in a kidney shaped tool box.
Includes rider tools and service tools for the rider-mechanic.
VT No. Fits
16-0011 1999-13
16-0098 2014-16
16-1070 2017-up
Tool Kits
VT No. Fits
16-0857 1985-up
16-0850 1979-84
16-0529
Roller Dolly
• Holds up to 1250 lbs.
VT No. 16-1026
Mini-Lift
• For use lift on table or floor to free wheels.
•1000 lbs capacity with a rubberized top plate.
Jims M-8 Engine Stand • V-Twin logo and bright orange paint.
VT No. 16-1199 VT No. 16-0529
M-8 Tool
TOURING
Jims Main Bearing Remover and Jims M-8 Wrist Pin Remover Adapter quickly
Installer for 2017-up M-8 Big Twins and easily removes the wrist pins in M-8 en-
removes left or right main bearing without Jims M-8 Cylinder Hold Down Nuts Kit keep gines. Save space your tool box, use with Jims
damaging the case. Also provides correct the cylinders in place when the heads are TC-88 wrist pin remover tool. Fits 2017-up FLT.
alignment and depth during assembly. Fits removed from the engine. Useful when installing VT No. 16-1187
2017-up FLT. the second cylinder over the piston and rings
VT No. 16-1182 after the first cylinder has been installed. Fits
2017-up FLT. VT No. 16-1186
Jims M-8 Cylinder Head Holder is two sided,
one side threaded for Twin Cam heads, and the
other threaded for M-8 models.
VT No. 16-1188
Jims M-8 Cam Bearing Remover and
Installer Tool is required 2017-up FLT Jims M-8 Left Main Seal Removal Tool. The
and 2018-up FXST, FLST M-8 models. Milwaukee Eight has a new crankshaft oil seal
This tool holds tighter tolerances which that is difficult to remove without potentially dam-
allows for a more precise installation aging the crankcase bore. The tool is designed
depth. *Note: This remover uses the "Jims to do the job with no chance of damage to the
Style" remover collet as well as "Jims" fine case. Simply insert the removal fingers over the
engine output shaft, and then slide the lock collar Jims FLT Inner Primary Shifter Shaft Bushing
threaded installation driver. Tool easily removes both worn bushings and
VT No. 16-1185 over the fingers. Once assembled, you can eas-
ily remove the seal square to the core by simply quickly installs the new bushings to the proper
turning the wrench. Use on the new Milwaukee location at the same time, without removing the
Eight engine, 2017-up. inner primary.
VT No. 16-1200 VT No. 16-1193
Jims M-8 Cylinder Torque Plates.

Aluminum cylinders cannot be accurately
honed and measured without the use of
torque plates. The Jims Torque Plate kit Jims Swingarm Bearing Installer Tool.
for use on Milwaukee-Eight ® cylinders will VT No. 16-1194
simulate operating stress conditions when
boring or honing cylinders. These plates
adapt easily to conventional boring bars or
Sunnen honing machine, and do not require Jims M-8 Shifter Mechanism Sleeve Remover
the removal of ring dowels. Use on 2017-up and Installer is for removing and installing the
Milwaukee Eight® engine shifter mechanism sleeve in M-8 transmissions.
VT No. 16-1201 The sleeve can be removed and installed cor-
rectly without disassembling the transmission.
VT No. 16-1191 Jims Axle Installation Guide for 2008-up mod-
els with either a 1" or 25 mm hollow axle. Aids in
aligning wheel with swingarm and brake caliper
during assembly.
VT No. 16-1195
Jims M-8 Valve Spring Compressor
Adapter for diassembly and assembly of
the multiple smaller valves on M-8 *Note:
Conical valve spring adapter only to be
used with VT No. 16-1771 Valve Spring Jims Fork Cap Installation Tool
Compressor Tool. VT No. 16-1198 Jims Balancer Scissor Gear Alignment
VT No. 16-1189 Screw holds the two halves of the spring bal-
ancer gear in alignment before removal for
easy installation. Use on 2017-up M-8 engines.
VT No. 16-1181
Jims M-8 Alternator Rotor Remover and
Installer for M-8 engines 2017-up FLT, 2018-up
FLST, FXST. This tool will easily remove the
Jims M-8 Countershaft 1st Scissor Gear
high output rotor without damage to the mag-
Alignment Tool ensures that the scissor
nets. VT No. 16-1183
gear teeth mesh correctly with the main-
shaft 1st fear. For M-8 models. *Note: it is Sprocket Shaft Seal
16-1184 and Lock Installers for
installed before the scissor gear is removed
to maintain alignment of the gear halves Big Twins 2017-up M-8.
Jims Steering Head Race Installer Tool
under spring pressure. VT No. 16-1184
VT No. 16-1196
VT No. 16-1190
Big Twin 1984-up Index
A BELT DRIVE CONTINUED CALIPER CONTINUED
BIG TWIN
ADVANCE UNIT..................................332,333 Belts (Rear)............................................220 Front...............................................249,250
AIR CLEANER......................................365-386 Bolt Kit.....................................................209 Rear.......................................245,246,247
Adapter...................................................384 Cover...............................................215,216 CAM
Adapter Plates..........................................384 Guard/Dress Up...............................215,216 Bearing.......................................151,156
Breather...........................................385-386 Pulley..............................217,218,219,220 Bushing...........................................154
Cone.................................................381-382 BIKE KIT......................................................405 Bushing Replacement...........................1264
EFI...................................... 366,369,370,371 BOLT LIST.................................................1319 Chest Kit..................................................162
Filter.......366,368,369,370,371,372,373 BOOK...............................................1268-1270 Gasket...................................168,1309
...........................374,375,376,379,381,382 BRAKE....................................224-261 Gasket/Sealer..................................163,190
Hi Flow......................................367,371,375 Banjo Bolt.........................................258,259 Gear..................................163,164,165,166
Insert....................................................377 Bleeder Screw.........................................251 Shaft...............................................164,165
Mount........................................383,384,386 Caliper..........245,246,247,248.249,250,251 CAP(Chrome)
Mount/Hardware.......................377,383,384 Caliper Brackets...............................247,248. Axle........................................447,448
S&S...................................................379 Caliper Front......................................249,250 Chrome...................................404,405,1318
Teardrop....369,372,373,374,376,378,379 Caliper Rear...............................245,246,247 Fork..................................................271,272
Turbo...............................................375,380 Caliper Rebuild.....................................251. Gas..............................1199-1204,1228
V-Charger...........................365,373.375,384 Caliper Thread Chart.............................249 Hub.........................................................451
Velocity Stack........................................393 Disc (Rotor)....246,247,249,253,254,255,256 Oil............................................................425
AIR FILTER....365,366,368,369,370,371,372, Disc Bolt......................253,254,255,257 Snap........................................1318
........373 374,375,376,378,379,380,381,382 Disc Brake Pad.......................................252 CARBURETOR....................................388-396
TC Upgrade Kit.......................................368 Disc Pulley Spacers................................257 Adapter...................................................388
Recharge Service Kit...............................382 Fittings and Parts............................258,259 Bendix.....................................................388
ALLEN SCREW KIT....................................405 Hose.................................................258 CV Keihin...............................389,390,391
Listing....................................................1319 Line................................................260,261 Dell’Orto..................................................388
ALTERNATOR.....................................343-348 Master Cylinder (Front).........1044,1045,1048 Jet...............................389,390,391,392
Charging System..............................346-348 Master Cylinder (Rear).......................243 Keihin........................................389,390,391
Ring Replacement...................................346 Master Cylinder Cover.............................1048 Manifold............................................387
Rotor.........................................345,346-348 Master Rebuild................................244,1048 Mikuni.......................................395
Stator.......................................................344 Pad............................................252 S&S..................................................393
AXLE.........................................442-448 Pedal....................................237,238,240 Seal.......................................................388
Adjuster.....................................445,447 Pedal Pad............................231,240,1071 Shorty Carb............................................392
Cap Covers................................442,447,448 Reservoir Cover.....................................243 CASE...............................................151
Front..........................................442-444 Plunger...................................................244 Bolt Set....................................................150
Nuts................................443,444,445,448 Rod.................................................237,238 Boring Service........................................1263
Rear..........................................445,446,447 Rotor............246,247,249,253,254,255,256 Seal.......................................................1316
Spacers..................................444,445,446 Spring Fork...................................1218-1219 CHAIN
Switch..............................................258,358 Adjuster/Tensioner............................208,211
B Tee/Tube..........................................258 Bolt Kit.....................................................209
BACKREST........................................1254 BREATHER..........................................384-386 Diamond.................................................210
BAFFLE...............................................320,322 Banjo Bolts.............................................384 Drive System............................................214
BATTERY....................................361-364 Bolts.......................................................384 Guard........................................215,288-289
Cable.......................................................361 Canister..........................................385,386 Masterlink...................................1050-1051
Cover/Side/Top.......................................364 Gear.......................................................163 Primary......................210,1050-1051
Eliminator......................................1305 Oil Collector........................................386 Tensioner................................................211
FXST Hardware.....................................362 Valve Service.........................................1264 CHAIN GUARD....................................288-289
Mount Hardware.........................362,363,364 BUSHING LIST..........................................1307 CHARGING SYSTEM...................346,347,348
Pad ........................................................362 CHOKE CABLE..........................................391
C CIRCUIT BREAKER....................................365
Strap................................................362
Terminal Hardware...............................362 CABLE CLAMP
BEARING Battery.....................................................361 Cable................................................259,401
Cam.........................................151,156 Braided Wire.........................................686 Exhaust....................................311,314,318
Clutch/Drum..............................200,201 Choke......................................................391 Hose........................................1197,1198
Crankcase...........................................151 Clamp.............................................259,401 Wire.......................................................1302
Kick Start................................................199 Clutch........................................398-399 CLEANER...............................................1271
Neck Post/Tree Stem........271,281,282 Fork Tube Clip.........................................401 CLUTCH...............................................198-207
Primary.....................................351,352,441 Heat Shrink Tube..............................361 Adjuster...................................................207
Pinion...................................................155 Idle...............................................396,400 Cable..................................233,.398,399
Rod..........................................................153 Speedometer.........................................402 Control (Handle).....................................207
Starter...............................................351,352 Throttle..................396,397,399,400 Clutch Kit..........................................204-205
Swingarm..............................................305 Wire Loom Clip...................................682 Hub............................................200,201,202
Throttle Sleeve.........................................397 Wrap........................................................361 Jockey.........................................232,233
Wheel...............................................449,450 CALIPER Lever.......................................................207
BELT BUCKLE........................1325,1326,1327 Bumper...................................................248 Pack.................................................203
BELT DRIVE........................................214-216 Bolts..............................249,251 Pedal Pad.............................................231
Belt.............................214,215,216-220 Brake Inserts (Chrome).....................245,249 Plate..................................................204,205
145
CLUTCH CONTINUED ELECTRICAL CONTINUED FENDER CONTINUED
Police Kit..................................................205 Regulator.................................343,346,347 Glide....................................................291
Release...................................................206 Spark Plug..............................................330 Light.......................................................296
Release Cover..........................................198 Spark Plug Wire...............................328,329 Luggage Rack..........................290,467-468
Rod............................................200,201,206 Starter..........................349,350,351,352 Mount..............................................290.
Spring.........................................205 Switch......................................358 Mud Flap..................................................292
COIL......................................325,326,327 Terminal Board........................................355 Mud Flap/Extension..........................293,294
Bracket........................................324 Wiring...........................................360 Pad (Seat)..............................................1254
Cover..........................................325 ELECTRONIC FUEL INJECTION (EFI)................ Spring Fork.............................................612
CONNECTING ROD..........................153,1261 ...........................337,338,339,340-341,366 Strut..................................................295,311
CONNECTOR (WIRE)......................1299-1301 EMBLEM..........................642,1205-1206 Rail..........................................................296
COUNTERSHAFT................................194,195 END COVER.........................................198,349 Rear.................................................293,294
COTTER PIN LIST.....................................1316 ENGINE Rivet........................................292,1316
COWL........................................269,1088,1092 Bar...........................................................298 Trim/Tip..............................292,296,297
CRANKCASE..............................................151 Bushing List............................................1301 FILTER
Bearing..........................................151,166 Case........................................................151 Filter.........366,368,369,370,371,372,373
Breather Valve...................................158,163 Case Set...................................................151 ...........................374,375,376,379,381,382
Bushing...................................................154 Chrome Valve Cover..............................174 Fuel.............................................1197,1198
Crank Pin...............................................153 Dress Up Kit...........................................157 Oil................................428,429,430,431
Sprocket Shaft........................................155 Flywheel...........................................152 FLASHER....................................................358
CRANK PIN..................................................153 Gasket..............................1308,1312 FLYWHEEL........................................152
CRANKSHAFT............................................154 Guard..........................................298 Balance Service.....................................1262
Balance Service.....................................1263 Head.......................................................183 Crank Sensor Cover................................158
CUSTOMIZER KIT......................................157 Headbolt/Cover................................176 Remanufacture.....................................1261
C Y L IN DER................. . . . . 183, 184, 185 Mount.....................................150,322-324 FOOTBOARD........................1074-1078
Base Cover...............................................162 Race.................................................153,155 FOOTPEG.....................1056-1070,1072
Extended............................1052,1064
Big Bore Kit..............................183,184,185 Remanufacture Service.........................1260
Folding........................................1062
Boring Service........................................1260 Roller................................................155 Heel Rest..............................................1059
Evolution..........................................185 Seal List........................................1315,1316 Mount(Replica).............1052,1053,1054,
Gasket.................183,184,185,1308,1312 Sealant..................................................1271 ....................................1059,1068
Head...................................183 Short Block..............................................150 Relocate....................................1070
Sleeving.................................................1260 Skid Plate................................................304 Shifter.............1055,1058,1063,1064
Twin Cam.................................183,184,185 Spacer List............................................1320 ............1065,1067,1066,1067,1068,1069
Sprocket...................................210,212,214 Stirrup.....................................1059
D Stroker Kit................................................152 FORK....................................................262-280
DASH............................................411-415 EXHAUST............................................306-320 Boot.............................................262,278
Base.......................................................411 Baffle......................................320,322 Boot/Cover..............................................278
Bracket......................................416,421 Bracket..........307,308,309,310,311,312,319 Brace................................................275
Decal..............................................414,1047 Clamp..................309,311,314,318,319 Bushing Service.....................................1265
Dress Screw Kit......................................414 Crossover.................................307 Cap................................272,273
Iso Mount ................................................417 Donut......................................307 Conversion Kit (Glide)..............................271
Panel/Divider...........................................412 Fishtails...............................309,313 Cover...................................263,264
Switch........................355,356,357,358,359 Enrichment Device...............................316 D Style.....................................................264
Wiring......................................................360 Exhaust.......306,307,308,309,310,311,313 Damper............................................275,277
DERBY..................................................438,439 ..................................314,315,315 Drain Plug.............................................272
DECAL...............................................414,1206 Goose......................................................314 Glide.........................................269
DERBY COVER...................................438,439 Heat Shield....................................317,318 Internal.............................................276,277
DEUTSCH CONNECTOR.................1299,1301 Monster...................................................310 Installation Kit...................................264,266
DIAGNOSTIC................................337,338,339 Muffler......................................312,313 Leg Assembly..................................262,263
DIPSTICK Oxygen Sensor.........................308,313,315 Leg Bushing..........................................1265
Oil Tank....................................................425 Port Replacement..................................1265 Leg Set.........................................263,273
Transmission...........................................198 Sleeve.....................................................317 Lock Tab.............................................,1317
DOWEL PIN LIST.....................................1316 Slip On................................311,313,314, Lowering Kit.............................................276
DRAIN PLUG Taper Valve..............................................317 Narrow Glide............................................265
Fork.........................................................272 Tip.............................................306,310 Neck Cup.........................................281,282
Transmission....................................195 Torque Tube.............................................320 Phatt......................................................263
Oil.....................................................425,426 Upsweep...............................................309 Plug...........................................272
DRESS UP KIT...............................157,404,405 Wrap.........................................................317 Raked Neck.............................................281
Derby Cover.....................................438,439 Seal.......................................................279
Ignition Cover...........................................331 F Slider......................................272,273
Primary Cover.....................434,435,436,437 FENDER..............................................290-297 Spring.............................................276
Bolt Set...................................................291 Spring Fork...............................1216,1217
E Brace..............................................290 Spring Fork Rebuild................................1265
ELECTRICAL Bracket.............................................291 Stabilizer..................................................275
Battery.........................................361-364 Bumper....................................................296 Stem Nut/Cover....................................279
Charging..........................346,347,348 Emblem.......................................642 Stem Parts...................................268,279
Coil...........................326,327,333,334,335 Extension(Rear)............................294 Stop............................................270,280
Connector.............................358 Front..............................262,291,292 Triple Tree..........262,264,268,269,270,271
146
FORK CONTINUED H INSPECTION TAG.......................................321
Tube......................................273,274,277 HANDLEBAR INTAKE.................................................387,388
Tube Clamp..........................................262 Control/Switch..............................1044-1046 EFI............................................340-341
BIG TWIN
FORK TUBE......................................273,274 Clamp...........................................1302
FORWARD CONTROL........................224-230 J
Damper............................................1035
FRAME End Plug...............................................1087 JIFFY STAND...........................................284
Cover........................................................302 Riser..........................1028-1032,1033,1034 JET..............................389,390,391,392
Guard.....................................................298 Spring Fork......................................784-788 JOCKEY.......................................232,233
Neck Kits..........................................281,282 Wiring...........................................1043,1046 JIFFY STAND...............................................284
Offset Component....................................219 HANDLEBAR GRIP.........................1081-1087
Right Side Drive......................................303 K
Heated...................................................1083
Pivot Kit...................................................304 HARDTAIL...................................................305 KEY CHAIN/KEY HOLDER......1325,1326,1327
Skid Plate...............................................304 HEAD KEY.............................................1317
Swing Arm..........................301,303,304,305 Bridge.......................................................158 KICKSTAND...................238,283,284,285
Trim and Cover.........................................302 Bolt.........................................................176 KICKSTART...............................................199
Cover.......................................................174 Conversion Kit..........................................199
G KROMMET.........................1142,1144,1316
Dress Up..................................................157
GAS TANK.......................................406-410 Gasket........183,184,185,1308,1312
Cap..............................1199-1204,1228 L
Remanufacture....................................1264
Dash..........................................411,412,413 LAPEL PIN................................................1324
Resurfacing........................................1264
Divider............................................412. HEADLAMP...........1088-1090,1092-1108 LENS........................................
Emblem..................................1205,1206 Bates.........................................1103 ...........1119,1126-1129,1130,1131,1134,1135
Filter.............................................1197,1198 Bracket................1096,1100,1104,1107, LEVER...............................206,222
Gasket (Cap)......................................1312 ...............................1108,1109,1216 Hand............................................233
Line...............................................1197,1198 Bulb.....................1093,1094,1093,1095 Pin/Bushing....................................1046
Mount...............................................409,410 .........................1098,1100,1105,1106 Shift...............................................222,226
Panel............................................412 Connector......................1088,1106,1107 LICENSE.................................1139-1144
Petcock........................................1192-1196 Cowl.............................269,1088,1092 LIFTER/TAPPET............................172,173
Cycle Ray......................................1096,1105 Base............................................173
Shut Off.................................................1196
Fork Cover Set.....................................1094
Tank/Dash Kit........................................406 LIFT.......................................1273
HID........................................1096 LIGHTS.........................................1091-1169
GASKET...........................................1308-1313 Internal.............................1088,1097
Air Cleaner...............................381,387,1313 Bar.............................................1153
Rim...........1088,1089,1090,1092,1094 Bulbs.......1094,1095,1096,1097,1098
Cam Cover..........................................1309 .................................1095,1097 ................1101,1137-1138,1165
Carburetor.......................................387,1313 Spring Fork.................................1096,1097 Fender....................1126-1129,1166
Cometic.................................................1313 Visor/Trim......................1088-1095, Gasket.................1117,1134,1135,1162
Cylinder..............................1308,1312 .......................1131,1132,1135,1149,1162 Headlamp......................1092-1108
Derby Cover...................................439,1310 HEATSHIELD.............................317,318 Indicator............................1104,1165
Distributor Base.....................................1310 HELICOIL..................................................1298 Marker............1145-1148,1151,1154
Installation Service.................................1264 Reflector....................................1166
Engine..............................................187,188
Signal.......................1154-1164,1218
Exhaust.......................................1310 HIGHWAY BAR................................1052,1054
Spotlamp..........................1109-1114
Gasket List...................................1308-1313 HORN........................................1167-1172 Tachometer/Speedometer..........1165
Gas Tank Cap....................................1312 HOSE................................427,429,1198 Tail Lamp....................................1115-1135
Generator..............................................1309 Cover...........................................427 Turn Signal..................................1152-1161
Head...................190,191,192,1308,1312 End................................................427 LIGHT..............................................109
Ignition...................................................1310 HUB...................................................453,454 Bar..........................................................1153
Inspection..............................................1310 Bulb.........1106,1107,1114,1140-1141,1168
I Fender.......................1129,1131-1132,1169
Manifold.................................................1313
Master Cylinder..........................1052,1312 IGNITION Gasket...................................................1165
Oil Pump.........................................1309 Advance Unit.............................332,333,337 Headlamp..................1091-1093,1095-1109
Pushrod.................................................1309 Bracket....................................................342 Indicator.......................................1101,1168
Primary................................1303,1313 Circuit Breaker.........................................365 Marker.................................1148-1151,1154
Rocker...................................................1308 Clamp.....................................................360 Reflector................................................1166
Sealant..................................................1271 Coil..............................326,327,333,334,335 Signal....................................1155-1164
Tail Lamp......................................1134,1312 Condenser..................................332 Spotlamp......................................1110-1115
Tappet Guide.........................................1309 Controller.................................337 Tachometer/Speedometer....................1168
Top End...........................................191-192 Cover(Points).........................................331 Tail Lamp.....................................1116-1138
Transmission................................194,1311 Fuel Injected................................340-341 Turn Signal....................................1152-1158
GASKET KIT........................................185-186 Points.....................................................668 LOCK TAB LIST........................................1317
GASKET LIST..................................1308-1313 Magneto.......................................1303-1306 LONG BLOCK SERVICE..........................1260
GAUGE Module.....................................334,337 LOCKWASHER......................................1320
Oil...........................................432,433 Spark Plug.................................328,329,330 LUGGAGE RACK.......................290,467-468
Speedo/Tachometer...416,417,418,419,420 Switch..............................356,357
Timing Plug.......................................481,662 M
GOGGLE................................................1271
GRIP..............................................1081-1087 Vacuum Switch Assembly......................358 MAGNETO.......................................1303-1306
By Wire...................................................1081 Weight Spring...........................................332 MAINSHAFT................................194,196
Heated...........................................1083 Wiring....................328,329,360,361 MANIFOLD...........................................387-388
Vintage...........................................1087 INDICATOR LAMP...........................1104,1165 MASTER CYLINDER
INSPECTION COVER.............................439 Cover..............................................1052
147
MASTER CYLINDER CONTINUED PEGS......................................1054-1072 ROCKER CONTINUED
Front...........................1044,1045,1052,1053 PILLION PAD.............................................1254 Clutch Kit.........................................231-233
Gasket............................................1312 PIN LIST....................................................1316 Cover(Chrome)................................177-179
Rear..................................................243 PINION.......................................155,163 Gasket...................................................1308
Rebuild Kit.............................................1052 PIPES...................................................306-314 ROD
MIRROR...........................................1173-1192 PISTON...............................183,187,188,189 Brake..............................................237,238
Extension.............................................1177 PLUGS Connecting...................................153
Lighted.......................................1174,1180 End Plug..............................................1087 Clutch....................................206,207
Metric Adapter.......................................1192 Fork..........................................................272 Shift..................................................222,223
Split Vision............................................1183 Magnetic.........................................426 ROLLER PIN LIST.....................................1316
Stem....................................1184,1187,1188 Oil Tank..............................................423,425 ROLLER.................................................149
MODULE.......................................336,337 Spark Plug...............................................330 ROTOR
MOTOR PLAQUE......................................1328 Timing...................................481,662 Alternator.................................345
MOTOR SHOP SERVICE Transmission Fill...................................198 Brake........246,247,249,253,254,255,256
Alternator Ring Replacement................1263 POINTS Kit.............................345,346,347,348
Breather Valve Machining....................1265 Conversion Kit.........................................332 Shim........................................................345
Cam Bushing Big Twin.........................1264 Cover.....................................................331
Case Boring.........................................1263 POLISH/CLEANERS.................................1271 S
Crankshaft Balance..............................1263 POUCH......................................................1267 SADDLEBAG............................................468
Cylinder Boring....................................1260 PRIMARY Relocation Signal....................................1216
Cylinder Sleeving.................................1260 Chain.....................................210,1050,1051 Support Trim............................................467
Engine Remanufacture.......................1260 Cover/Trim........................434,435,436,437 SCREW LIST.............................................1322
Exhaust Port Replacement..................1265 Derby...................................438,439 SEAL LIST........................................1315,1316
Flywheel Balancing..............................1262 Dress up Kit.............................................157 SEALANT..................................................1271
Flywheel Assembly...............................1262 Drive Kit...................................................214 SEAT........................................1231-1253
Flywheel Remanufacture......................1261 Gasket............................1309,1313 Buddy............................1248-1249
Mounts.............1236-1244,1248,1249
Fork Leg Bushing Install.....................1261 Hardware.............................441
Police Style...............1244,1245,1246,1247
4/5 Speed Rebuild.................................1265 Inner (Cover)........................................437 Rear Pads..................................1235,1254
5/6 Speed Conversion Service..............1265 Inspection (Cover)..................................439 Rigid.........................................1240
Head Remanufacture..........................1264 Outer.................................434,435,436,437 Solo..........1231-1240,1244,1245,1246
Head Resurface..................................1264 Screw Kit................................................440 .............................1247,1248,1249
Linkert Rebuild Service.......................1263 PULLEY...............................217-220 Springs.......1241,1243,1244,1252,1253
Long Block Remanufacture.................1260 Bolt..........................................................220 Tee.....1236,1237,1241,1246,1250,1251
Magneto Rebuild.................................1304 Brake/Rotor Kit.......................................209 SERVICE MANUAL..................................1269
Short Block Remanufacture...............1260 Disc/Spacer (Rear)................................208 SHIFT.............................................224-226,228
Spark Plug Helicoil Service.................1264 Cover................................................217-218 Arm...................................................218,220
Spring Fork Rebuild..............................1265 Spacers........................................209,220 Brackets..................................................218
Transmission Remanufacture..............1265 PUSHROD........................167,169,170,171 Foot Control Kit.................................228,229
Valve Seat Service...............................1264 Clutch...............................................200,201 Lever/Arm.........................................191,218
Wheel Truing/Build…............................1265 Cover.....................................167 Linkage/Rod............................................219
NECK CUP KIT...................................281,282 Seal................................................169 Pawl Assembly........................................191
NUT LIST..........................................1321,1322 Pedal Pad.......................................228,237
R Peg.............1061,1063,1066,1067,1068
O RACE Rocker.....................................................220
OIL Case.......................................................155 Rod.........................................................222
Change Service Kit.................................1272 Rod..........................................................153 Shaft..................................................195
Cooler...............................................424,432 RAIL SHIM LIST..................................................1307
Dipstick....................................................425 Fender.....................................................296 SHOCK.................................................299-300
Drain Plug........................................423,426 Sissy Bar........................286,287,1255-1257 Lowering Kit............................................300
Filter...................................428,429,430,431 REFLECTOR.............................................1163 SHOP SERVICE...............................1260-1265
Fitting......................................426 REGISTRATION HOLDER..........................321 SHOW BIKE BOLT KIT.......................1318
Gauge.....................................432,433 REGULATOR/RELAY........................343,353 SIGNAL.........................1152-1161,1162,1163
Line...................................................427 Brackets.................................................342 SIREN..........................................................566
Motor/Transmission/Gear......1262,1272 Covers.....................................................342 SISSY BAR..........................286,2871255-1257
Mount Hardware...............................423 Wiring......................................................360 SISSY BAR/PAD.......................................1254
Oil(Quarts)...........................1262,1272 RIM.................................................452,459,460 SKID PLATE...............................................304
Plug..................................423,425 RING...........................................188 SKULL STUFF.................................1012-1016
Pressure Switch/Pressure...................358 RISER............................................1028-1034 SLIDER...............................272,273
Pump.......................................158,159 Glide............................................1031-1032 SOLENOID...........................................353
Seal List..................................................1315 Spring Fork.............................................785 SNAP CAPS........................................1318
Tank..........................................422,423 RIVET SPACER LIST...........................................1320
O-RING......................................................1314 Brake.............................................1316 SPARK PLUG..............................................330
Clutch.........................................1316 Cover......................................................330
P Fender.......................................1316 Helicoil Replacement.............................1264
PARTS MANUAL............................1268-1270 List.........................................................1316 Sumax......................................329
PATCHES (CLOTH).............1323,1327,1328 ROCKER.........................................177-179 Wire.................................................328-329
PETCOCK..............................1194,1195,1196 Arm.........................................................168 SPEEDOMETER....416,417,418,419,420
PEDAL PAD..............................................1071 Box/Kit...................................177,178,179 Cable................................................402
148
SPEEDOMETER CONTINUED THROTTLE.....................396,397,399,400 VALVE CONTINUED
Digital................................................419,420 Cable...............................396,397,399,400 Seal..................................................181,182
Drive Unit.................................................403 By Wire.............................................397,400 Seat Service........................................1264
BIG TWIN
Electronic..........................................416 Internals............................................397 Springs/Collar/Key...............................180
Lamp Socket.........................................417 TIMING VELOCITY STACK..................................393
Mini...................................................418 Fuel Injected...................................337-339 VOLTAGE REGULATOR......343,346,347,348
Mount......................................................421 Plug................................................481,662
Reset Knob.............................................417 TIRE.............................................1207-1213 W
Sensor/Sending...............................406 TRANSMISSION..................................193-199 WASHER LIST.................................1320,1322
SPOKE.................................................453,454 Case.................................................194 WHEEL.................................................450-460
SPOKE WHEEL.......452,454,455,456,457,458 Conversion.......................................193 Assemblies...450,452,454,455,456,457,458
SPOTLAMP......................................1109-1114 Countershaft....................................194 Axle....................................442-447
SPRING FORK.................................777-791 Cover............................................198 Bearing.............................................449,450
Rebuild..................................................1265 Dipstick...........................................198 Building and Truing...............................1265
SPROCKET Drain Plug.................................................198 Cast/Forged....................................458
Bolt Kit.....................................................209 Door..................................................198 Hub/Cap...........................................451
Compensating..........................................212 Fill Plug..................................................198 Greaser.....................................449,450
Motor.......................................................213 5 Speed Rebuild...................................1265 Rim.........................................452,459,460
Rear........................................................208 Gasket.....................................194,197,1311 Seal...............................................449
Shaft........................................................155 Internals............................193,194,196,197 Spacer..............................................449
Transmission...........................................208 Kicker Conversion.....................................199 Spoke...............................................453
STANDS....................................1273 Mainshaft.........................................194,196 Spool............................................1214-1215
STARTER.....................................349-352,354 Mount Plate............................................197 Truing/Build Service.............................1265
Cover................................................349 Neutral Switch........................................358 Tube......................................................1213
Drive................................................350-351 Offset Plate.............................................197 WIND DEFLECTOR.....................................466
Housing..................................................354 Oil Seal Kit..............................................197 WINDSHIELD.......................................464-466
Relay...................................................353 Pawl..................................................195 WIRING
Repair..............................................353 Plug..................................................198 Clamp...................................................1302
Ring Gear.........................................200, 350 Remanufacture Service.........................1265 Connector....................................1299-1301
Shaft.......................................351 Right Side Drive.......................................193 Dash.......................................................360
Solenoid..................................................353 Seal List........................................1316 Deutsch Connector......................1299,1301
STATOR......................................................344 6 Speed.................................................193 Diagnostic System...................................356
STRUT................................................295,311 Sprocket......................................194,206 Fuse...............................................1304
STUD LIST................................................1307 TRIPLE TREE.......... 262,264,268,269,270,271 Handlebar...................................359,360
SWINGARM.......................... 301,303,304,305 Glide...............................................269 Harness............................................360
Rebuild...........................................305 Spring Fork............................................1217 Ignition.....................................................360
SUSPENSION......................................299-300 TUBE (Tire)................................................1213 Primary...................................................361
SWITCH TURN SIGNAL..................................1155-1168 Shrink Wrap.............................................361
Brake...............................................358 Canceler.......................................1166,1167 Spark Plug........................................328-329
Button.....................................................359 Equalizer....................................1166,1167 Tail Lamp.............................................1118
Flasher....................................................358 Flasher...........................................358,1166 Terminal/Connectors............1299-1301
Hi Lo Beam............................................358 Gasket...................................................1165 Tie Strap................................................1302
Hinge.................................................356,357 Relocation....................................1162,1163 Wire........................................................361
Ignition...............................356,357 TWIN CAM Wire Loom Clip.......................................1302
Neutral....................................................358 Cam..................................156,165,166 WRIST PIN..................................................188
Oil Pressure.............................................358 Cam Chest................................................162
Vacuum...................................................358 Cylinder............................................183
Dress Up Kit...........................................157
T Flywheel...........................................152
TACHOMETER........................418-420 Gasket...........................................191
TAIL LAMP..............................1116-1139,1141 Oil Pump...............................................158
Assemblies...................................1116-1138 Piston.................................187,188,189
Bulb.......................................................1141 Pushrod........................................167,170
Connector..............................................1141 Rocker Arm...............................................168
Derby Mount..........................................1127 Rocker Box...............................................177
Fender Mount.............1117,1129,1131,1132 Tappet....................................................173
Gasket...................................................1310 Top End Kit....................................191,192
Lamp............................................1116-1137 Valve.................................180,181,182
Lens.............................................1137-1139
License Bracket.........1116,1124,1131,1137 V
Side Mount..................................1120-1128 V-ROD.........................................................225
Tombstone...................................1134,1135 VALVE...........................................180,181,182
Vintage................................1132-1134,1137 Breather................................................158
Visor.............................................1137,1138 Cover.......................................................177
Wiring......................................1128 Guide.....................................................181
TAPPET....................................167,172,173 Keepers.................................................180
TERMINAL.............................................355 Relief.......................................................158
149
Short Block V-Twin Mfg. supplied components
for every aftermarket motorcycle
company who sprang up due to
the shortage of Harley-Davidson
motorcycles.
Startups included:
• Big Dog (1994-2011)
• Excelsior-Henderson
• Ultra
• American Iron Horse (1995-2008)
• Confederate
• Gilroy Indian Co. (1999-2003)
• Orange County Choppers
• California Motorcycle Co. CMC(1990-1998)
Case Bolt
10-0007 Engine Case Bolt Kit includes the neces-
sary hardware to bolt together the cases
of the years listed. Available as OEM
stock in chrome, cadmium plating or cus-
tom acorn in chrome.
Acorn Chrome Fits
V-TwinTM 80” Short Blocks are shipped fully assembled as 9882-22 9882-22 9883-20 1996-99 Evolution
shown. All 80” units feature an S&S Crankcase, Sifton Oil 9955-27 — 2000-17 FLST,
Pump/Breather assembly, stock stroke flywheel, Timken FXD, FXST
Bearings, stock cam properly installed with a matched pinion Chrome Engine Case Allen Bolt Kit
and cam gear with Torrington bearing. Assembly is supplied fasten engine case halves together. Fits
with a chrome nose cone cover and chrome lifter blocks are fit- 1983-95 Big Twin Evo.
ted with standard tappets. VT No. 37-9191
VT No. Fits
10-0007 1984-90 Evo 37-9191
10-0008 1992-99 Evo
37-9180 37-9187
Engine
Mount Bolt
Chrome Allen Screw Kit connects engine mounts, front, top
and rear to frame on models listed below.
9854-28
VT No. Fits
Upper and Lower 37-9180 1991-17 FXD
VT No. Years Model Type Finish 37-9187 1984-99 FXST, 1985 FXWG-FXE
9854-28 1984-99 FXST Chrome
9855-28 1984-99 FXST Zinc
9927-28 1984-99 FXST Allen
9927-28-P 1984-99 FXST Allen Polished
Lower Only A B
9859-20 1989-99 FXR Chrome
Chrome Front Engine Bolt Mount Block. Front engine
9928-20 1989-99 FXR Allen
mount bolts thread into regulator mount block.
9928-20-P 1989-99 FXR Allen Polished
VT No. Type
1999-17 Front Only
31-0635 A
9937-20 1999-17 FXD Allen Chrome
31-0739 B
9936-28 1999-17 FXD Acorn
Lower Front
2116-15 2000-17 Softail Allen Chrome
2117-15 2000-17 Softail Hex Chrome
2118-15 2000-17 Softail Hex Zinc
Transmission to Motor Mount TC-88, FXD
9935-8-P 1999-17 FXD Allen Polished
150
10-0291
Crankcase Set
BIG TWIN
10-0576
For TC-88
Models
1984-91
33-5401
Evolution
Type
10-0000 Jims Forceflow Cylinder Head Cooler will keep your Twin
Cam® running cooler in stop and go traffic. Jims has come up
with a a serious way to drop your temperature by as much as
100 degrees. Although this mounts in the horn location, Jims
has relocated a horn inside the fan housing. The fan can be
installed to be turned off manually or it can be regulated by a
S&S Crankcase Sets are shipped set up with Timken left side thermostat controlled sensor that monitors head temperature
bearing and race assembly, seal and seal spacer, oil pump and activates the fan when engine temperature rises. This kit
drive bushing, needle bearing and pinion race for right side, is highly recommended for performance motors to help extend
(pressed in and line honed) ready to assemble. Also included engine life. Complete kit includes high powered fan, housing,
are cylinder studs, nickel plated case bolts, crankcase fittings horn, hardware and all wiring. Kit installs from horn location and
and a timing and magnetic drain plug. Accepts wheels up to supported by center case bolt location. Use on 1999-16 Twin
8½” diameter. Note: Oil pump required for assembly. Cam Touring models.
VT No. Year/Model Bore Oil Pump VT No. Finish
10-0000 1984-91 V2 Type Stock 12-8002 33-5401 Black
10-0005 1992-98 V2 Type Stock 12-9975 33-5462 Chrome
10-0575 1992-99 V2w/EFI Stock 12-9975 CUBIC INCH CHART
10-0576 2000-06 TC-88A Stock Stock STROKE 3¹⁄₂” 3¹³⁄₁₆ 3.968” 4¹⁄₄” 4¹⁄₂” 4⁵⁄₈” 4³⁄₄” 5.00”
10-0291* TC-88A/Evolution Stock Stock 74” 80”
10-0011 1992-99 V2 Type 3.878 (3⁵⁄₈”) 12-9975 2³⁄₄” 45”
10-0577 2000-06 TC-88A 4.00 Stock 3⁵⁄₁₆” 61”
10-0292* TC-88A/Evolution 4.00 Stock B 3⁷⁄₁₆”
3¹⁄₂”
64.8”
67.2”
73.7”
76.3”
78.7”
81.6”
83.4”
86.6”
85.7”
89.0”
88.0”
91.4”
92.8”
96.1”
*Note: Features Evolution Engine Mounts.
Replacement Pistons and Rings for S&S motors. Piston kits
O 3⁵⁄₈” 72.1” 81.7” 87.4” 92.9” 95.5” 99.0” 103.2”
3¹¹⁄₁₆” 74.6” 84.7” 90.7” 96.1” 98.8” 101.5” 106.8”
include rings, wrist pins and clips. R 3¹³⁄₁₆” 79.9” 90.6” 97.0” 102.8” 103.7” 108.9” 114.2”
VT No. Bore Size Size Motor
11-1410 4” 113” E 3⁷⁄₈”
4.00”
82.3”
87.9”
93.4”
99.7”
100.1” 100” 108.9” 111.9”
106.8” 113.0” 116.1” 119.3”
117.8”
125.6”
Replacement Ring Sets for S&S Pistons Only are for two pis- 4¹⁄₈” 93.4” 106.0” 113.5” 120.2” 123.5” 126.9” 133.6”
tons. 4¹⁄₄” 99.2” 112.6” 120.5” 127.6” 131.1” 134.7” 141.8”
VT No. Bore Size Size
11-1300 4” Standard 1 cubic inch = 16.38 cc Cubic Inch = πr2 x Stroke
11-1401 4¹⁄₈” .010 O.S. 1 cubic inch = .0163871 liter r = 1/2 of Bore
11-1402 4¹⁄₈” .020 O.S.
Extreme Duty Left Side Main Bearing Kit is for all 2003-up
Twin Cam and M-8 models. Includes bearing, spacer, thrust
Our Motor Shop can washers and snap ring. When high-performance engine modi-
fications are made, the increased torque is transferred via the
crankshaft to the drive system, putting a significantly higher
install this update load on the bearing. The extreme duty bearing is case hard-
ened on the inner and outer race to provide increased load
capacity and enhanced durability in high-torque applications.
for you!
Installed in the left side of the crank case and supports the
output shaft to the primary drive system.
Fits 2003-17 FLST, FXST, FXD, FLT.
VT No. 10-0346
151
Flywheel
10-1042
V-Twin Motor Shop Twin Cam Flywheel Remanufacturing Services

Flywheel that are out of round or scissored can be repaired. The new fly-
10-1091
wheels on the 1999-up Big Twin are pressed together, but no match for our
V-Twin Motor Shop. We will press apart and disassemble this style wheel
assembly, inspect shafts, and crank pin components. V-Twin Motor Shop
will rebuild your Twin Cam flywheel assembly to OEM specification using
new bearings, crank pin and solid plugs, then balance and true. We can
also weld the pin and plugs, if requested, at the flywheel and crank pin inter-
face, for rigid power. We stock the bearings, cages and oversize crank pins
to provide you with the components at hand when your flywheel arrives. We
will hone the rods to allow the oversize pin to be fitted as required. Flywheel
set will be trued and balanced. The final assembly and press is complete in
our dedicated TC-88 flywheel fixture assembly.
We install new hardened crank pin and bearing set into the rebuildable rods.
If required, new connecting rods can be installed with customer’s authoriza-
tion. We balance the wheels for the new parts and stock piston weight. We
press the flywheel halved back together and true the bearing journals to
.001” or less. Truing the bearing journal eliminates engine vibration at cruise
speeds.
V-Twin Motor Shop can also install solid crank pin expansion plugs and
then tig weld the pin and plugs so flywheels won’t flex or scissor. This extra
step can help prevent future problems. The rebuilt flywheel is stronger than
Complete Stock Stroke Flywheel Assembly is shipped stock OEM.
assembled and trued with shafts. VT No. 10-1091 requires the
use of 1987-up type Pinion Shaft Bearing assembly and VT No. For a smoother running engine, high speed balancing is done on a Sunnen
Dynamic Balancer. This service will require customer’s piston or purchase
12-0967 late bearing retainer.
of new piston kits from V-Twin.
VT No. OEM Fits Note Brand
For Big Twin 80” We also offer several other machine shop services. V-Twin Motor Shop can
10-1091 23906-78G 1984-90 80” 1,2 VT also weld and repair all types of metal and aluminum parts like crank cases,
10-1042** 23906-93B 1993-99 FXST, FLST cylinders and heads.
FXD, 1993-84 FXR 1,2 VT
Our newly developed TC-88 Flywheel program allow Twin Cam model fly-
10-0374 — 1999-06 FXD 3 S&S
wheels professionally rebuilt in V-Twin Motor Shop.
1999-06 FLT
Notes: To Request a work order RA number, or for any questions call:
1-Features replaceable pinion and sprocket shafts and narrow sprocket 1-800-833-8946
side flywheel VT No. Service
2 Require use of 1987-up type pinon shaft bearing and retaining ring. 60-0249 Twin Cam Remanufacturing Service
3-One piece type flywheel with non-removable shafts. 60-0248 TC Remanufacturing with New Connecting Rod Set
S&S 89” Evolution Stroker Replacement 60-0247 Crank Pin/Plug Welding Service
Piston Sets for 4⁵⁄₈” flywheels. 9.25:1 compres- 60-0123 High Speed Balancing with a flywheel remanufacturing service
sion with rings. .030 size.
VT No. 11-0479
Stroker Flywheel for Twin Cam

Timken Bearing Sleeve S&S Twin Cam 4¹⁄₂” Stroker Flywheel Assembly for all 1999-02
will convert 2003-17 Twin Cam models. Feature 1.500 crank pin and replaceable race
Twin Cam models from bearing. Fits all models with non-balancer Twin Cam engines.
a roller bearing to a Pistons not included.
Timken tapered bearing. VT No. Item
Bearing sold separately. 10-1094 Flywheel Assembly
VT No. 10-0856 10-1871 Brass Plug
152
10-1607
Rod Assembly
BIG TWIN
V-TwinTM Replica Stock
Replacement Rod Sets include
new rods, crank pin, nuts, cages and
standard rollers fitted and assembled.
Piston pin bushings are installed.
Replaces 24281-83. Fits 1984-99
Evolution 1340cc.
VT No. 10-0188
L1981-86 Big Twin 2-Hole

10-1607 Crank Pin Kit includes 2-hole
crank pin, rod races, standard rod
rollers, and retainers.
10-2571 VT No. 10-2571
Sifton Steel Rod Cage Set

includes 4 cages, 24366-51 and
standard Torrington Roller Set
Connecting Rod Set includes crank pin, two solid caps, and for 1936-98 Big Twin. Replaces
bearings. The upper bushing is installed. Wrist pin bushings 42385-40.
installed fits for twin cam Big Twin models. Set is crafted with VT No. 10-2522
high precision. Fits 1999-17.
Rod Bearing Sets With Set
VT No. 10-1607
of 3 Cages for Big Twins fitted
Rod Set and Crank Pin Kit for with standard size Torrington
replacements in 1999-up models. rollers for connecting rods. The
Rods include wrist pin bushings. cage material is noted.
10-1205 VT No. Item VT No. OEM Cage Year Brand
10-1205 Bearing Set 12-2556 24366-51 Steel 1936-86 S&S
10-1607 Rod Set 10-2556 24346-87A Steel 1987-99 Sifton
10-8755 Crank Pin, STD
10-8756 Crank Pin, .001 Connecting Rod Race Sets made from 52100
10-8757 Crank Pin, .002 steel use and hardened. Fits 1936-99 Big Twin.
10-0921 Pin Plugs VT No. Brand Size
10-8755 10-2586 Bronze Shim Set 10-0138 Replica STD
*Note: Press required for installation 10-0828 Replica .001 O/S
SiftonTM Big Twin Rod Complete 10-0826 Replica .002 O/S
Assembly features forged and 10-0830 Replica .005 O/S
machined H-Beam design of certified 10-0829 Replica .010 O/S
“H-Beam” 4340 steel with multi staged heat treat- 10-0823 Replica .002 O/S
ment and are fitted with Torrington 10-0809 Jims STD
rollers with extruded alloy cages and
a SiftonTM pin and matching nuts.
Unfinished type requires honing of upper
and lower bushings. Rods are 7.440”
Crank Pin
Big Twin Crank Pin Nut Sets.
center to center and will accommodate Eastern Jims OEM Year
up to 5” stroke. 12-0559 12-0606 23969-83 L1983-99
VT No. Year Item
10-0272 1981-99 Assembly
10-0274 Unfinished Rods Only
S&S Genuine Rods are heavy
duty replacement rod sets which 80” Crank Pins available from Jims, Eastern, and V-Twin. Pins
include wrist pin bushings, rod races, are made of 8620 steel with .062 heat treated penetration. O.S.
matched rods, pins, rollers, cages Pins are oversize on bearing diameter. 180° oil location pins
and nuts for stock or stroker use. Fits have more complete bearing lubrication.
1984-99 Big Twin Evolution. Rod set Years OEM Jims Eastern V-Twin
is heavy duty type for stock or stoker 3 Hole 3-Hole 2-Hole
models with 16 bearing steel cages. L1981-99 23961-80A 10-8357 10-0130 10-1211
10-0268 VT No. 10-0268 L1981-99 .001 O/S 10-0353 — —
L1981-99 .002 O/S 10-8358 — —
L1981-99 180° Oiling 10-0354 — —
153
Crank Shaft Component
Wrist Pin Bushings are available in bronze replica type or
Sifton Ampco 45 for all 1936-up Twins. Replica type sold in
pairs. Sifton type sold each.
1936-99 1999-17
10-0427 Size Big Twin TC-88 Type
STD 10-0756 — Replica 10-0756
12-0309 STD 10-0765 — Sifton
.002 10-0757 10-8557 Replica
.005 10-0758 — Replica
.010 10-0759 — Replica
10-8557
10-0444 10-0428 1971-99 Big Twin Bronze Inside Crank
Pin Flywheel Washers sold in pairs.
VT No. OEM Size
10-1150 6506 Standard
10-1149 6506B .005 Oversize
Left Crankcase Bearing and Spacers for 1958-99 Big Twin
models. 10-8272 10-8260 Sifton Cam Bushing Kits
VT No. OEM Description includes cam and gear shaft
12-0309 9028 (A) 1969-02 Left crankcase bearing bushings/bearings with lock
12-0947 11160 (B) 1985-02 Left bearing retainer ring pins and thrust plate.
14-0108 12026B (D) 1970-99 Crankcase oil seal
14-0810 12068 (D) 2000-up Crankcase oil seal VT No. Fits
10-0427 24002-70 (F) 1970-99 Sprocket shaft spacer 10-8272 1993-99 Big Twin
12-0813 24039-01A (F) 2000-02 Sprocket shaft spacer 10-8260 1973-92 Big Twin
12-0814 24038-03 (F) 2003-17 Sprocket shaft spacer Motor Shaft Spacer features built in seal
10-0442 24032-70 (I) 1970-up .060 Sprocket shaft spacer flange to give added support for alternator
10-0443 24033-70 (I) 1970-98 .090 Sprocket shaft spacer rotor.
10-0444 24034-70 (I) 1970-98 .120 Sprocket shaft spacer VT No. 10-0948
10-0445 24035-70 (I) 1970-98 .150 Sprocket shaft spacer
10-0428 24038-70 (I) Same as above, Assortment Connecting Rod Roller Sets for Big Twins. Each set supplies
10-1212 35850-84 (I) 1970-98 .010 Sprocket shaft spacer enough rollers for application only for use in alloy cages.
10-1213 35851-84 (I) 1970-98 .020 Sprocket shaft spacer 1973-86 Big Twin
10-1214 35852-84 (I) 1970-98 .030 Sprocket shaft spacer Size
10-0461 35853-96 (I) 1970-98 .055 Sprocket shaft spacer Standard 10-0144
.0002 oversize 10-0145
.0004 oversize 10-0146
12-0946 .0006 oversize 10-0147
.0008 oversize 10-0148
Bulk Pack Rollers (100 Quantity)
1973-86 Big Twin
Size Type VT No. OEM
.0002 Short 12-4554 9442A
.003 Long 12-4552
Right Crankcase Bearing and Spacers for 1958-99 Big Twin
models.
VT No. OEM Description
12-0904 11007 (C) 1958-86 Right bearing retainer ring
12-0946 11177 (C) 1987-92 Right bearing retainer ring
12-0967 11177A (C) 1993-99 Right bearing retainer ring
12-0250 24608-54 (J) Screw right case bushing
10-2533 24650-58 (K) 1958-86 Right bearing assembly, Standard
10-1274 24626-87A (K) 1987-99 Right bearing assembly,
white/gray
10-1275 24628-87A (K) 1987-99 Right bearing assembly, green
10-1276 24641-87A (K) 1987-99 Right bearing assembly red
10-1277 24643-87A (K) 1987-99 Right bearing assembly, blue
10-1157 24692-58 (L) 1958-86 Right bearing washer Motor Plaques measure 18” x 24” and are made of metal.
10-1278 23928-87A (M) 1987-99 Pinion Shaft Race Motor Plaque Set includes 9 plaques. VT No. 48-1811
154
Sprocket Shafts for L1981-86 Big
Twins. Replaces OEM# 23909-80. Sprocket Shaft
Jims Eastern Replica Length
10-0416 12-0309 12-0428 12-0345
BIG TWIN
10-8318 10-0416 10-0440 Stock
Sprocket Shaft Spacer and
Seal Kit for 1970-99 Big Twin.
VT No. 10-8284 12-1544
12-0768
Pinion Shaft Nut, Taper End.
Eastern Jims OEM Fits
Left Crankcase Bearing. Factory assembled with correct
12-0517 12-0609 24016-80 L1981-89
spacer for proper end play.
Timken VT No. OEM Fits
Pinion Keys available in ten packs. 12-0309 12-0428 9028 1969-02
12-0345* 9045 1984-02
VT No. OEM Type Year Style 12-0768** 24605-07 2000-17
12-0202 23985-54 Gear Side 1987-90 Semi Circle 12-1544** 24004-03A 2003-17, except FLT 03-17
*Note: Two Required. Order snap ring and the spacer separately.**Note:
12-0205 26348-15 Gear Side 1975-86 Semi Circle 12-0768 is used on right side only, for 2000-03 models, it is also used on both
12-0209 11218 Taper Side 1981-92 Semi Circle right and left side for 2003-17 models. 12-1544 is a heavy duty main bearing for
12-0215 11219 Gear Side 1991-99 T-Key left side use only on 2003-17 models.
Timken Bearing Spacer Shims available in 5 packs.
1969-84 FL, 1971-84 FX, 1986-2002 FLST, 1982-94 FXR, 1984-2002 FXST,
1979-2002 FLT, 1991-2002 FXD
VT No. OEM Size 10-8506 9126 .1045-.1035
10-8523 9110 .0895-.0905 10-8507 9127 .1065-.1055
10-8500 9120 .0915-.0925 10-8508 9128 .1085-.1075
10-8501 9121 .0945-.0935 10-8510 9130 .1125-.1115
10-8502 9122 .0965-.0955 10-8522 9131 .1145-.1135
10-8503 9123 .0985-.0975 10-8511 9132 .1165-.1155
10-8504 9124 .1005-.0995 10-8512 9133 .1185-.1175
10-8505 9125 .1025-.1015 10-8513 9134 .1205-.1195
Pinion Shaft
Pinion Side Case Race machined and ground to factory
specifications. 10-0432 10-0889
Sifton Replica OEM Size Year/Model
Pinion Shaft for Big Twin.
10-0296 10-0278* 24599-58A Standard 1958-92
— 10-0797 24599-58B Standard 1993-99 Year OEM Jims Eastern Replica
Jims Eastern 1987-89 24006-87 10-8329 10-0432 10-0889
10-0245 10-0214 24599-58A Standard 1958-92 1958-86 Pinion Bearing Set for right
10-0248 10-0217 — .010 1958-92 side includes rollers, cages, washers and
— 10-0231 24599-58B Standard 1993-99 snap rings.
10-0250* 10-0232 24599-58B .002 1993-99 VT No. 10-2533
— 10-0233 24599-58B .005 1993-99
*Note: 1993-98 Pinion Bearing Race features 360° oiling groove. 1987-99 Pinion Gear Side Bearing Set for Big Twin. Includes
Can be used on 1958-87 models with later Torrington roller cages.
assembly VT No. 10-1274 standard through 10-1277. VT No. OEM Color
Pinion Shaft Gears. Orange is largest, 10-1274 24626-87A White/Grey
black is the smallest. 10-1275 24628-87A Green
Size 1977-89 1993-99 10-1276 24641-87A Red
OHV BT Evo Big Twin 10-1277 24643-87A Blue 12-1275
Orange 12-9938 — 10-1278 23928-87A Pinion Shaft Race
White 12-9943 —
Yellow 12-9945 — Case Rollers
Red 12-9940 12-1210
Blue 12-9941 — TORRINGTON®
Green 12-9942 — 1958-86 Big Twin Right Side Case Rollers.
Black 12-9939 — Size 28-Piece OEM
Standard 10-0319 9220
Sifton 1990-99 Pinion Shaft
.0002 10-0320 9221
Conversion Package Kit is for
.0003 10-0339 9218
those installations of multiple piece
.0004 10-0321 9222
10-2585 aftermarket flywheels in 1990-99
engines, or replacement of 1990 .0006 10-0322 9223
and later assemblage with stock 1981-89 parts. Kit includes 1977- .0008 10-0323 9224
89 red pinion gear, 1954-89 pinion shaft oil pump drive gear, 1954- .001 10-0324 9225
89 pinion shaft gear spacer and 1954-89 pinion shaft gear nut. .002 10-0325
VT No. Brand Year
10-2560 S&S 1990-99
10-2585 Sifton 1977-99
155
99-17 Cam Shaft Component for Twin Cam
42-0702
12-0754
10-0485 10-0587 12-0762
10-0481
10-0486
15-1198 12-9902 10-0924

10-0813 42-0119
Cam Shaft Components for Twin Cam models, 1999-17 unless noted. 10-0915 25683-06 23 Secondary Cam Drive Chain 07-17 FXST,
VT No. OEM # Item FLST, 2007-16 FLT, 2006-17 FXD
12-1178 601 1 Roll Pin 10-0483 25610-99 25 Primary Cam Drive Chain, 1999-05 FXD,
12-0750 9198 2 Left Side Cam Shaft Bearing 1999-05 1999-06 FLT, FXST, FLST
FXD, 1999-06 FXST, FLST, FLT 10-0917 25675-06 25 As Above 2007-17 FXST, FLST,
12-0765 9215 2 As Above 2006-17 FXST, FLST, FLT 2006-17 FXD, 2002-16 FLT
9946-20 4740A 4 Allen Screw Set, As Above 12-9902 26035-99 26 Oil Pump Assembly Cpt 1999-05 FXD,
37-1002 4741A 5 Screw, As Above 1999-06 FXST, FLST, FLT
12-0751 8990A 7 Ball Bearing 1999-05 FXD, 99-06 FXST 12-9990 26037-06 26 As Above 2006-17 FXD, 2007-17 FXST,
FLST, FLT FLST, 2007-16 FLT
12-0762 8983 7A Bearing 1999-05, As Above 12-1418 26400-82B 28 Oil Pump Relief Valve
12-0905 11031 8 Retaining Ring 1999-05, As Above 12-9730 26464-99 29 Georotor Feed, 1999-05
14-0814 11286 9 O-Ring 1999-05, As Above 12-9731 26281-06 29 Georotor Feed, 2006-17
14-0803 11293 10 O-Ring, As Above 12-9732 26255-00 30 Georotor Scavenger, 2000-05
14-0819 11298 11 O-Ring, Viton 1999-05 As Above 12-1418 26278-06 30 Georotor Scavenger, 2006-17
12-0753 11494 13 Retaining Ring 1999-05 As Above 42-0119 32679-99 32 Sensor Cover, Chrome
12-0761 16589-99 13A Dowel Ring, 1999-17 FXST, FLST, FXD 12-0760 35115-99 33A Retaining Ring 1999-01
1999-16 FLT 10-0485 39954-99 34 Primary Cam Drive Chain Tensioner
10-0587 14761-00 Pad Set, TC-88B, 2000-17 FXST, FLST 1999-06 FXST-FLST-FLT,1999-05 FXD
15-1214 17045-99 14 Cam Service Gasket Kit, 1999-17 FXST, 10-0689 39954-99A As Above with Delcron Shoe
FLST, FXD,1999-16 FLT 10-0918 39968-06 34 As Above 2007-17 FXST-FLST,
13-0233 18223-98 Performance Valve Spring Set 2006-17 FXD, 2007-16 FLT
1999-04 FXST, FXD 10-0486 39964-99A 35 2nd Cam Drive Chain Tensioner
12-0754 24623-99C 14A Right Side Main Bearing 1999-06 FXST, L1999-06 FXST, FLST, FLT, BT except
FLST, FLT, 1999-05 FXD 2006-05 FXD
12-0768 24605-07 14A As Above 2007-17 FXST, FLST, FLT, 10-0690 39954-99A As Above with Delcron Shoe
2006-17 FXD 10-0919 39969-06 35 As Above 2007-17 FXST-FLST,
15-1198 25244-99A 17 Cam Cover Gasket, 1999-17 FXST, FLST, 2007-16 FLT, 2006-17 FXD
FXD, 1999-16 FLT 10-0924 34& Cam Chain Tensioner Set
10-0813 25247-99 18 Chrome Cam Cover, 1999-00 FXST, FLST, 35 2007-17 FXST, FLST, 2006-17 FXD,
FXD, FLT 2007-16 FLT
42-0702 25369-01A Chrome Cam Cover, 10-0487 39965-99 36 Chain Guide 1999-05 FXD,
2001-17 FXST, FLST FXD, 2001-16 FLT 1999-06 FXST, FLST, FLT
10-0904 25674-99 21 Cam Drive Spacer, .360 1999-05 FXD, 9954-5 68042-99 37 Sensor Cover Screw Set
1999-06 FXST, FLST, FLT
10-0905 25675-99 21 Cam Drive Spacer, .365, As Above
10-0481 25607-99 23 Secondary Cam Drive Chain 1999-05
Crank Sensor fits 1999-17 FXST-.FLST,
FXD, 1999-16 FLT. VT No. 32-0988
156
Twin Cam Components
BIG TWIN
10-0915 10-0481
10-0483 10-0917
Chains Twin Cam Chain Shoe Tool is used to remove and replace the
VT No. Item Fits spring loaded cam chain tensioners. Saves hours of the me-
10-0915 25683-06 23 Secondary Cam Drive Chain chanics time! Fits 1999-2006 FLT, 2000-2006 FLST, 2000-2006
07-17 FXST, FXST, 1999-2005 FXD. Note: Must order chain tensioners and
FLST, 2007-16 FLT, 2006-17 FXD related components as required.
10-0481 25607-99 Secondary Cam Drive Chain, VT No. 16-0188
1999-06 FXST
10-0483 25610-99 25 Primary Cam Drive Chain,
1999-05 FXD,
1999-06 FLT, FXST, FLST
10-0917 25675-06 25 As Above 2007-17 FXST, FLST,
2006-17 FXD, 2002-16 FLT
Dress Up Kit
43-0534 42-0691 42-0692
V-TwinTM Chrome Dress Up Kits

• Include parts and hardware for installation as pictured.
43-0515 • Kits require removal of engine to install rocker box covers.
• All kits for electric start models unless noted as kickstart
and electric. Smooth derby and inspection covers are
included on FXST kits. Inspection cover on FXR, FXE, FLT
and FLH applications must be purchased separately. *Note:
Does not include gasket. 1980-84 kits do not include trans-
mission top cover.
Evo Models FXST-FLST, 5-Speed
43-0520 1987-88
43-0521 1989-91
43-0522 1993
Evo Models FLT-FXR, 5-Speed
43-0514 1985-86 FLT or FXR
43-0515 1987-88 FLT Only
43-0528 1994-98 FLT Only
Twin Cam FLT 5-Speed
42-0692 1999-2000
Important Note: Some items on this page may be emission-related parts
subject to California or other emission control laws. Please see note on for 43-0534 2001-06 includes cam dress cover trim and
important information regarding emission control regulatory compliance tappet base cover
and warranty information.
Twin Cam FXST 5-Speed
43-0536 2001-06
157
Oil Pump for 12-9990
Twin Cam Oil Pump
Alignment Tool. This tapered
tool threads into the oil pump
Twin Cam and perfectly aligns the pump
to the cam plate. Fits 1999-17
12-2070
FXST-FLST-FXD, 1999-16
FLT. VT No. 16-0998
12-2071
Twin Cam “A” Crankcase Breather
Valve features a machined Billet aluminum
body which contains four steel reed valves.
Valve body slides over pinion shaft and fits
inside pinion bearing bore and will allow air
and oil mist to escape from the crankcase
but will not allow them to re-enter.
VT No. Fits
12-2070 1999-02 12-9902
12-2071 2003-17 FXST, FLST, FXD Twin Cam Super Pump by Sifton utilizes an oversized highly efficient Geo Rotor
2003-16 FLT design. Provides a 40% increase in pump volume and a 60% more scavenging
volume. This high volume pump bolts into the stock location and includes O-Rings
and mounting hardware.
VT No. Fits
12-9902 1999-05 FXD, 1999-06 FXST, FLST, FLT
12-9990 2006-17 FXD 2007-17 FXST, FLST, 2007-16 FLT
42-1152 42-1153
Spring Alignment and Installation

Tool replaces the screwdriver and easily
compresses the spring to install the split 42-1155
pin without damaging the bore.
VT No. 16-0300
42-1154
Twin Cam Oil Pressure ByPass Shim. This machined shim
assures proper spring pre load improving oil pressure and
volume. Fits 1999-17 FXST-FLST-FXD, 1999-16 FLT. 42-1159
VT No. Unit of Measure
12-0108 5 Pack
12-0141 Each
Inner Cam Bearing Remover Tool allows
removal of needle bearing and will also keep
needles from falling into engine. For use on
2006-17 FXD, 2007-17 FXST, FLST, 2007-16
FLT.
VT No. 16-1351
Chrome Crank Sensor Cover Includes mount
Head Bolt Bridge. Bolts on!
screw. 1999-up FLT, 1999-17 FXD. VT No. 42-0953 Silver Black Model Fits
V-Twin Inner Cam Bearing Tool safely 42-1152 42-1153 EFI 1999-17 FXST, FLST, FXD,
installs the inner cam bearings to the proper 1999-16 FLT
depth in the case without damaging bear- 42-1154 42-1155 Carb 1999-06 FXD, FXST, FLST, FLT
ings. Chrome
VT No. 16-1390 42-1159 — EFI 2000-17 FXST, FLST,
1999-17 FXD,
158 1999-16 FLT
12-8002 Oil Pump
BIG TWIN
12-8008
S&S Complete Oil Pump Assemblies with billet style bodies.

Include all internal gears and shafts for years listed. Also avail-
able as complete kits that include drive shaft gear, pinion shaft
gear and breather gear kit.
Billet Oil Pumps Assemblies
VT No. Years 15-0549
12-8002 1973-1991 Big Twin
12-8003 1992-1999 Big Twin 12-0859
Oil Pump Kits with Breather Assembly
Sifton Oil Pump features geo-rotor compact cad/cam design,
12-8008 1973-1991 Big Twin
modular billet aluminum construction, superior scavenging,
12-8009 1992-1999 Big Twin
increased feed flow rate which eliminates wet-sumping in
crankcase. Fits 1992-99 Evolution.
VT No. Item
12-0859 Pump
15-0549 Gasket Kit
Gasket and Master 15-0362 15-0363 S&S Oil Pump Gasket and Master Rebuild Kits are avail-
Rebuild Kit able with paper or mylar gaskets. Gasket kits include inner and
outer gaskets, drive shaft key and snap ring. Master rebuild kits
include seal, snap rings, springs, ball, inner and outer gasket,
O-rings, and keys.
Gasket Kit Master Type Year
15-0361 Only Rebuild Kit
15-1269 15-0657 15-0361 Paper 1936-91 Big Twin
15-0658 — Paper 1936-91 Big Twin
15-0362 15-0364 Mylar 1992-99 Big Twin
15-0363 — Paper 1992-99 Big Twin
15-1269 — Metal All HVHP Pumps
Oil Pump Fitting

40-0563
40-0562
40-0575
Oil Pump Fitting Kit for Big Twin models. 40-0583
VT No. Year Type
40-0562 1984-91 Stock
40-0563 1970-91 Custom
40-0577 Installed
40-0584 Chrome Tight Spot Oil Pump Fitting
Set features a 5/16” allen socket for easy
installation or removal. Includes 1/8” NPT
40-0574 nipples.
12-1416 VT No. 40-0577
Chrome Oil Line Fitting Set will allow 12-1412 40-9982
use of ³⁄₈” braided steel lines. Built in
Chrome Oil Pump Fittings for 1968-99 compression fitting so no need for
Big Twin, 5 pack or four piece kit. clamps. Reusable three piece set.
VT No. OEM Type Oil Fittings for Big Twin models.
VT No. Thread Fits
12-1416 26338-68 90° Elbow VT No. OEM Type
40-0575 ¹⁄₂” NPT Twin Cam
40-0566 63533-41 Nipple for ³⁄₈” hose 12-1412 63533-65 Oiler Return
40-0583 ¹⁄₈” NPT Early
40-0574 Kit 90° And Nipple 40-9982 63541-70 Oiler Tee, Rear Chain
40-0584 ¹⁄₄” NPT Twin Cam
159
Big Twin Oil Pump Assembly
SiftonTM Oil Pump
Assembly features
improved oil pump
pressure regula-
tion that will ensure
correct oiling to all
areas of Big Twin
engines. This pump
kit includes all nec-
Breather Kit essary fittings, snap
rings, keys, gaskets
and mounting bolts.
Can be used on
12-9971 either chain drive or
belt drive models.
Pump Pump Years Finish
W/Breather
Driver Gears 12-9971 12-9802 1984-91 Polish
12-9972 12-9803 1984-91 Chrome
12-9975 12-9804 1992-99 Polish
Breather 12-9976 12-9805 1992-99 Chrome
Washers 15-0657 Gasket 1973-91 Mylar
15-0658 Gasket 1973-91 Paper
7827-12 15-0362 Gasket 1992-99 Mylar
15-0363 Gasket 1992-99 Paper
A 12-0805
B
Oil Pump Drive
Shafts fit 1970-99
9787-12 C D
Big Twin, replaces
26346-70.
VT No. 12-0805
12-9972
Big Twin Oil Pump Gears fit 1968-99 stock type and some
aftermarket units. Available in V-Twin Mfg. or Jims brand.
VT No. Jims # OEM Type
12-0166 12-1434 C 26317-48 Return Drive
Oil Pump Mount Kits for Big Twin. 12-1420 12-1435 D 26317-68A Return Idler
VT No. Years Type 8744-12 Hex Stock 12-0174 12-1436 B 26326-62A Feed Idler
8744-12* 1978-91 Chrome, Stock 12-0183 12-1437 A 26328-74 Feed Drive
9787-12* 1978-91 Zinc, Stock Chain Oil Adjuster Screws sold each. 12-0901
8747-12 1978-91 Allen VT No. OEM Fits Head
7827-12* 1978-91 Chrome Acorn 12-2523 63610-70 1970-99 FLH Slot
9763-16* 1992-99 Acorn Style Oil Pump Seals.
37-9000 1992-99 Chrome Acorn James GB No. OEM Fits
37-9001 1992-99 Chrome Allen 14-0623 14-0114 26227-58 1968-99 Big Twin
*Note: Includes studs where required. Oil Pump Snap Rings.
Sifton Big Twin Oil Pump Drive Shaft VT No. OEM Fits
Kit includes 3 keys, shaft gear, bushing 12-0901 11002 1970-98 Big Twin
and snap ring. Fits 1973-99 Big Twin.
VT No. 12-0810
160
Big Twin Oil Pump Gasket Kits include
gaskets, seals, snap ring balls and keys.
Spring and ball not included with James
Oil Pump
Oil Screen Kit includes proper plug,
BIG TWIN
Kits. screen, O-ring and spring.
Chrome Stock Years
James GB No. Type Years Cap Replica
15-0854 15-0233 Mylar 1981-91 12-0152
12-0152 12-0220 1981-99
15-0855 14-0026 Paper 1981-91
15-0856 15-0710 Paper 1992-99
15-1226 — Coated 1992-99, Metal
Big Twin Oil Pump Gaskets are available in
10 pack. 12-0392
A 12-1515
B
Tappet Oil Screens are exact replacement of
OEM, each.
James GB No. # OEM Use Years
VT No. OEM Years
15-0952 15-0137 B 26273-80B Case 1980-91
12-1515 24981-70 1970-99
15-0957 15-0683 A 26276-92 Cover 1992-99
12-0392 24983-00 2000-up
— 15-0682 B 26273-92 Case 1992-99
Oil Screen Spring for the tappet oil screen, 10
15-0955 15-0138 A 26276-80A Cover 1980-91
pack. 24982-70, 1970-82.
Mylar 6377
VT No. 13-0109
15-0953 15-0295 B 26273-80B Case 1980-91
15-0956 15-0296 A 26276-80A Cover 1980-91
Keys for Oil Pump Gears.
VT No. OEM Fits Sealing Washers for pressure switch, relief valve and tappet
12-0204 26340-36 1941-1967 Big Twin oil screen.
12-0205 26348-15 1941-up Big Twin,1972-76 XL-XLCH VT No. OEM Fits Type
C Tappet Oil Screen, Oil 14-0033 6377 1950-99 O-Pressure, 5 pack
A D Pump Check Valve 14-0503 11105 1970-99 Tappet, Relief Check Plugs,O-Ring
and Relief Valve Plugs.
B Replacement styles as
shown.
VT No. # OEM Fits Finish
8707-6 A 26263-80 1981-99 3 Piece Set Chrome
37-9226 B 3 Plugs 1981-99 Set Chrome
2074-6 B 3 Plugs 1981-99 Set Chrome
2073-2 B 1981-99 Each Chrome
8703-2* A 26263-80 1980-99 All Chrome
9644-2* C 26263-80 1980-99 All Chrome
9645-2* C 26263-80 1980-99 All Cadmium
9634-4 C 26263-80 1980-99 2 Piece Set Chrome
9635-4 C 26263-80 1980-99 2 Piece Set Cadmium 12-1487
37-8960* D 26279-89 1981-99 Dome Acorn Chrome 12-1486
*Note: The 1981-up uses the same plug on check valve, tappet
screen and relief valve. 1981-2000
“Super-Pump” Spring Kit for 1966-99 Big Twin A-Relief Valve/By Pass Kits include spring, plug and valve.
engines. This color coated spring kit ensures that VT No. 12-1486
your engine maintains the recommended oil pressure B-1981-99 Check Valve Kits include ball, spring and cap.
of at least 10 p.s.i. @idle and up to 36 p.s.i.@road VT No. 12-1487
speed with a warm engine. Each spring is individually A-Relief Valves and Springs.
installed in the pressure relief valve of the oil pump. Works in all
VT No. OEM Years Item
stock oil pumps as well as S&S and other aftermarket pump.
VT No. Brand 13-0111 26207-83 1983-00 Spring
13-9222 E.R.T. SP-1 12-1418 26400-82 1983-99 Valve
B-Check Valve Springs.
Pro Just Adjustable Pressure Relief Cap allows
VT No. OEM Years
the precise adjustment of oil pressure by turning
13-0112 26262-80 1981-99
the adjusting screw clockwise to increase oil pres-
C-Ball
sure or counterclockwise to reduce oil pressure.
12-0158 8866 1954-99
Comes with a “super pump” spring provided in
our spring kit 13-9222. Works in stock 1981-99 oil
pumps as well as S&S and other aftermarket oil
pumps. Fits 1981-99 without oil vent.
VT No. 12-9921
161
1999-17 Twin Cam
42-0702 10-0813 Form Fitting Chrome Steel Cover fits
over stock cam cases on 1999-up Big
Twin Twin Cam, No need to remove
cam case or disturb cams or gears.
Covers are held in place by existing
screws. Fits 2001-17 FXST, FLST,
FXD, 2001-16 FLT.
VT No. 42-0121
42-1054
Chrome Gear Cover for all Twin Cam Big Twins models. Jims Cam Cover Heat Sink
VT No. Years manufactured out of solid 6061
42-0702 2001-17 FXST, FLST, FXD, 2001-16 FLT billet aluminum and reduces
42-1054 Black, As Above temperatures in the cam chest.
10-0813 1999-00 FLT, FXD, 2000 FXST Uses existing timing cover hard-
9946-20 1999-17 Twin Cam Gear Cover Allen ware. Fits 2001-16 FLT, 2001-17
Screw Sets. FXST, FXD and FLST.
VT No. 9946-20 VT No. 16-1180
Cam Cover for 1973-99 Big Twin

42-0111 42-0118 Form Fitting
10-1298 10-0088 Chrome Steel
Covers fit over
stock cam cases
on Big Twins. No
need to remove cam
case or disturb cam
or gears. Covers
are held in place by
existing screws.
VT No. Fits
10-0040 42-0111 1970-92
42-0118 1993-99
Chrome Cam Gear Cover fits 1973-
92. Bushing and seal are installed.
Gasket, mounting bolts, and washers
are included in this kit.
10-0080
10-0111 VT No. 10-0111
10-0111 10-0297
Acorn Allen Stock
Screw Style Screw
Gear Cover Screw Sets.

1970-92 1993-99 Type Finish
Nose Cone Gear Covers fit 1973-99 Big Twin models. 9305-7 — Stock Chrome
Polished or chrome with bushings installed. Seal included. 9306-7 — Stock Cadmium
VT No. Years Finish 8761-7 9819-12 Allen Chrome
10-1298* 1973-92 Black 7402-7 — Acorn Chrome
10-0088* 1973-92 Polished
10-0040* 1973-92 Chrome Left Cylinder Base Cover
10-0111 1973-92 Chrome
10-0080 1993-99 Chrome 42-1172 42-1172
10-0297* 1993-99 Black
10-0798 1993-99 Chrome
*Note: Comes with mounting screws gasket and seal.
Cam Chest Kit fits
1987-99 Evo, as shown
with Sifton 140 cam. VT
Left Side Cylinder Cover bolts
No. 10-0672
to engine center stud for secure
installation. Fits 2007-17 FXST.
VT No. 42-1172
162
1984-99 Big Twin Pinion Hardware
1984-99 Big Twin Pinion Hardware
VT No. OEM # Year/Item
BIG TWIN
12-1184 275 1 1970-up Bushing Pin
12-1153 358 2 1970-up Dowel Pin
8761-7 Kit 4 1970-92 Chrome Allen Screw Set
9305-7 Kit 4 1970-92 Stock Chrome Screws
9306-7 Kit 4 1970-92 Stock Cadmium Screws
9633-50 6099 14 1970-up Washer, Chrome
12-0316 9058 18 1970-up Needle Bearing
37-8971 10046 19 1981-up Wire Clamp
12-0901 11002 20 1970-up Oil Pump Retainer Ring
12-0202 23985-54 23 1970-up Key, Gear Shaft
Note: 24/26 See Chart for Pinion Gear Listing
Pinion Shaft Gears. Orange is largest, black is the smallest.

Size 1977-89 1993-99
OHV BT Evo Big Twin
Orange 12-9938 —
White 12-9943 —
Yellow 12-9945 —
Red 12-9940 12-1210
Blue 12-9941 —
Green 12-9942 — 12-1425 –– 43 .060 Cam Gear Washer
Black 12-9939 — 12-1426 –– 43 .065 Cam Gear Washer
12-1427 –– 43 .070 Cam Gear Washer
12-0507 24023-54 25 1970-89 Pinion Gear Nut
12-1428 –– 43 .075 Cam Gear Washer
12-0613 As Above Jims
12-1429 –– 43 .080 Cam Gear Washer
12-0512 24022-90 25 1990-92 Pinion Gear Nut
12-1430 –– 43 .085 Cam Gear Washer
12-0577 7916A 25 1993-up Pinion Gear Nut
12-1431 –– 43 .090 Cam Gear Washer 12-1438
10-0703 24641-36 28 1970-up Oil Pump Shaft Bush
12-1432 –– 43 .095 Cam Gear Washer
12-1539 24703-54B 29 1970-89 Pinion Gear Spacer
12-1433 –– 43 .100 Cam Gear Washer
12-9922 24704-90 29 1990-up Pinion Gear Spacer
17-0908 25550-57 44 1958-up Lock Washer, 5 pack
15-0871 25225-70B 33 1970-92 Gasket and Seal Kit
17-1281 25550-57A 45 Cam Washer, 5 pack
15-0872 25225-93 33 1993-up Gasket and Seal Kit
10-0705 25581-70 46 1970-up Bushing
12-9906 25313-77 38 1978-99 Breather Valve, S&S
10-2525 As Above 46 .005 Oversize
12-9957 –– 38 As Above .030 O.S.
10-0708 25582-73 47 1973-92 Bushing Standard
12-9909 S&S 37 Washers for Above (Set)
10-2529 As Above 47 1973-92 Bushing .005 Oversize
12-1537 25313-77 38 1978-99 Breather Gear, Sifton Steel
10-8536 25582-93 47 1993-up Bushing
12-1531 25310-82 38 1982-90 1992-up Breather Valve(Plastic)
10-8556 As Above 47 1993-up Bushing .005 O/S
12-1530 Nylon 39 1982-up .130-.165 Set, 8 pack
12-1407 26345-73 50 1973-up Drive Gear, 24T 12-1439
12-1533 25329-91 39A 1991-up Big Twin Air/Oil Separator
12-0805 26346-70 52 1970-up Gear Shaft
12-1508 25550-36 43 1970-up Cam Gear
12-0205 26348-15 53 1936-up Oil Pump Key, 10 pack
Washer Set .050-.095 (10 pieces)
12-1392 26349-84 54 1984-89 Drive Gear
10-1254 25550-84 43 1984-up .045 Thick, 5 pack
12-1438 26354-90 54 1990-92 Drive Gear
12-1440 –– 43 .050 Cam Gear Washer
12-1439 26354-93 54 1993-up Drive Gear
12-1441 –– 43 .055 Cam Gear Washer
SiftonTM Breather
Breather Gear A-Big Twin Steel B 12-1531 C 12-1510
A
Gear Kit is con- Breather Valve
structed of precision is a machined
ground steel with breather valve and
screen installed. 8 gear. Designed to
piece steel thrust replace the stock
washer set included. Fits 1978-85 BT. steel or plastic units.
VT No. 12-1540 Order 8-piece thrust washers separately. B-Stock Plastic Breather Valves.
S&S Reed Available in stock duration only with either
12-1949 VT No. OEM Year
Breather features standard or +.030 oversize outside dimen- 12-1531 25310-82A L1977-99
three steel reeds sion. 12-1953 As Above .005 Oversize
that are normally VT No. Years Size Brand C-Thrust Washer Set, Breather Valve for
in the closed posi- 12-9906 1978-99 Standard S&S 1979-99 Big Twin includes one of each
tion. The down- 12-1537 1978-99 Standard Sifton size as noted.
ward cylinder 12-9957 1978-99 +.030 S&S VT No. Fits Set
motion increases 12-9909 All Washer Set S&S 12-1510 1979-82 8 Steel
crankcase pressure to open the reeds. On 12-1510 All Washer Set Sifton .110, .115, .120, .125
the upward stroke a vacuum is created.
.130, .135, .140, .145
VT No. 12-1949
12-1530 1982-99 8 Plastic
.130, .135, .140, .145
12-1945 12-1945 .150, .155, .160, .165
Sifton Air Ramp fits S&S/Sifton
Breather Gear on 1936-99 models to
remove more air and oil from crankcase.
Requires removal of screen for installa-
tion. Gear not included. Installed
VT No. 12-1945
163
Cam for 1984-99 Evo
For a better street cam for a stock motor, a big lift cam for a dragster or in between, Andrews Products can supply it. All
10-2651
cams are computer designed and precision ground from alloy steel billets.
Andrews Engine Cams for Evo. Evo series cams are designed to maximize Evo motor performance while retaining hydraulic tappets. Both cams offered bolt in with
no head work in most cases. Note Shovelhead and V2 cams are not interchangeable.
VT No. Grind Timing* Duration Lift Springs Application
— Stock 01/37 218 .495 STOCK Listed for comparison. 1984-87 cam is 212° intake 202° exhaust .472” lift on both valves.
89-91 53/01 232 .495
— Stock -02/30 208 .472 STOCK Listed for comparison. 92 cam very close to 84-87 specs.
92-95 31/-09 202 .472 California cams are approximately 178° duration.
10-1171 EV13 15/31 226 .485 STOCK Bolt-in cam for street or touring with more mid range and upper
45/13 238 .495 end power more power than stock EV cam.
10-1123 EV23 10/30 220 .498 STOCK Bolt-in cam. Crisp throttle response and strong pulling power from 1500 to 6000 RPM.
40/8 228 .498
10-2651 EV3 21/37 238 .495 STOCK Bolt-in cam for light bikes (FXRS, etc). More mid range power. Idle smoothness unaffected. This is a
43/15 238 .495 6000 RPM cam for stock heads and springs with hydraulic tappets.
10-1180 EV27 20/36 236 .495 STOCK Bolt-in street cam with fast open and close ramps. Similar timing to EV3 but designed to produce a
44/16 240 .495 broad torque band. Pulls 1500-6000.
10-1146 EV46 25/41 246 .495 STOCK Bolt-in performance with fast open and close ramps. Similar to EV3 but higher static compression
49/17 246 .495 pressure for 6000+ RPM with stock heads and hydraulic tappets.
10-1183 EV51 28/44 252 .510 STOCK Easy installation with longer duration for modified street engines with hydraulic tappets. Power range
54/22 256 .510 from 3000-6500 RPM.
*Note: Timing measured at .053 cam lift.
Sifton For
Identification
check these
Sifton Stock Cams are replica type. Also available
with matching pinion gear.
Cam Cam Kit OEM Fits
Cam applications:
1987-99 Evo
—
10-8172
10-8188 24582-88 1987-90 Evo (OE)
— 24582-88 1987-90 Evo
For Big Twins

VT No. Year Cam Degrees At .053 Lift TDC Travel to Free
For 1987-99 Evo
10-0621 140 Ev Open Closes Total TDC Coil Bind Travel
Inlet 30 42 .450 .222 .480 .530
Exhaust 55 27 .450 .177 .480 .530
Camshaft for M-8

Andrews M-8 Camshafts Milwaukee 8 bikes are available in both 107 and
114 cubic inch engine sizes. With high efficiency four-valve heads, M-8 engines
show great potential for performance gains especially with new design Andrews
M-8 series camshafts. Keep in mind, cam timing specs for four valve heads look
very different from camshafts designed for two valve applications. Engines with
four valve heads have much greater flow efficiency so listed cam timing dura-
tions are a lot shorter.
VT No. Grind Timing CL** Duration Valve Lift @ Springs Application

Lift
.050 .020 TDC
Stock 107 Int -07/01 94 174 212 .350 .055 Stock Stock 107 engine cam data listed for reference.
Exh 33/-14 113.5 199 252 .370 .035 (114 inch engine in 2017 had same camshaft).
10-5271 M450 00/14 97 194 226 .450 .080 Stock Bolt in cam, 2017– up: more torque for riding with 107
34/00 107 214 251 .450 .076 engines, rapid torque rise (1000–5500 RPM).
10-5272 M460 00/20 100 200 233 .460 .080 Stock Want more power from a stock engine? This is the cam for
38/02 108 220 258 .460 .086 you! See curves below (1000–5800 RPM)
10-5273 M462 06/14 94 200 230 .460 .080 Stock Bolt in cam, 2017–up: 107-114 inches. Big power (127 ft.
40/00 110 220 258 .460 .086 lbs and 109 hp (from 1200 to 5500 RPM).
10-5274 M464 06/24 099 241 241 .464 .106 Stock New M464 cam grind, great mid range torque and power,
50/00 115 267 267 .460 .080 w/free flow exhaust pipes and injector tuning.
10-5275 M504 06/60 102 249 249 .504 .105 Hi-Lift More torque and power for bigger engines 114
56/00 118 274 274 .504 .080 inches and all around riding (1500–5700 RPM).
10-5276 M520 08/40 106 260 260 .520 .115 Hi-Lift Cam for bigger cubic inches. More torque and
64/04 120 285 285 .520 .094 power for modified engines (1600–5500 RPM).
164
10-8211
Camshaft for Twin Cam
Andrews Twin Cam Camshafts are available to fit stock type chain drive or S&S gear drive.
10-8154 Early style cams fit 1999-2006 FXST, FLT and 1999-2005 Dynaglide with silent chain drive.
BIG TWIN
Late style cams fit 2007-17 FXST, FLT and 2006-17 Dynaglide with roller chain drive. All cams
listed are for use with stock hydraulic tappets and stock type splined gears or S&S gear drives.
VT No. Drive Type Grind Timing* Duration Valve Lift Springs Application
.053 .020 Lift @
TDC
10-6309 Late Roller Chain 09H 02/28 206 242 .492 .075 Stock Bolt-in cam more power through entire RPM range
40/-04 216 252 .486 .075
10-8162** Late Gear Drive 12 37/05 220 259 .474 .110 Stock Bolt-in cam with similar specs to stock 06 Dynaglide cams.
02/34 216 256 .088 Slight power increase. No retuning necessary.
10-8121 Early Chain Drive 21 10/30 220 255 .498 .134 Stock Bolt-in cam with more torque. All around riding with stock comp. ratio and heavy
10-8163** Late Gear Drive 40/08 228 264 .498 .121 bikes. 21 Cams work well with fuel injection or carburetors. (1700-4800 RPM)
10-8127 Early Chain Drive 26 11/35 226 262 .490 .138 Stock Bolt-in cam for low RPM torque; FLT, etc. For two up touring, this cam will add
10-8131** Early Gear Drive 41/09 230 266 .490 .112 more torque and HP at lower and middle RPM range.(1800-5500 RPM) 26
10-8139 Late Roller Chain Cams work well with fuel injection or carburetors
10-8164** Late Gear Drive
10-8141 Early Chain Drive 31 10/46 236 272 .510 .131 Stock Great cam for motors with 95+ inches and 10:1 compression ratio, lower TDC lift
10-8142** Early Gear Drive 52/08 240 276 .510 .120 means easy installation similar to 37 but different timing. 2400-5800 RPM power
10-8189** Late Gear Drive range.
10-8193** Late Gear Drive 32 10/46 236 272 .510 .131 Hi Lift Hi-Lift version of 31 much more power thru RPM range
52/08 240 276 .510 .120 with 10:1+ compression ratio 2800-5800 RPM Power Range.
10-8137 Early Chain Drive 37 18/38 236 272 .510 .174 Stock Twin 88’s with this bolt-in cam grind have shown 80+rear wheel HP. Smooth
10-8132** Early Gear Drive 46/14 240 276 .510 .148 idle, broad torque band. Runs (2200-5600 RPM)
10-8146 Late Roller Chain
10-6348 Late Roller Chain 48 13/29 222 257 .548 .153 Stock Broad tip cams for Baggers with stock motors. Max torque at low and mid RPMs.
43/15 238 273 .548 .163
10-8147 Late Roller Chain 44 49/17 246 283 .495 .158 Stock Engines with 88 inches 9.5 compression ratio or higher.
10-8195** Late Gear Drive Maximum torque and HP at middle and upper RPM.
10-8154 Early Chain Drive 54 16/42 238 273 .555 .165 Hi-Lift Specifically designed for 96 and 103 engines with compression ratio up to 10:1
10-8211** Late Gear Drive 43/15 238 273 .555 .158 (2200-5600 RPM range).
10-8196** Late Gear Drive 50 20/48 248 283 .510 .184 Stock Cams for maximum torque and HP higher RPM ranges. For lighter bikes and
54/18 252 287 .510 .168 engines with 9.5 comp. ration (or higher) and 88-95 inches (2600-6000+ RPM).
10-8197** Late Gear Drive 55 22/46 248 283 .550 .197 Hi-Lift Cams for maximum torque and HP at higher RPM ranges.
52/20 252 292 .550 .181 For engines with 9.5 compression ratio or higher and 88-95 inches.
10-8198** Late Gear Drive 60 24/56 260 296 .560 .205 Hi-Lift For a well prepped engine with 95 inch cylinders and head work, 100+ HP is
58/22 260 296 .560 .205 within reach. Tuning also includes exhaust changes (2400-6000+ RPM).
10-8199** Late Gear Drive 67 24/48 252 287 .570 .209 Hi-Lift Performance Cam for 95-107+ inches, 10:0 to 10:8 com-
58/22 260 297 .570 .187 pression ratio with high flow head setup (2600-6400+RPM).
10-8152** Early Gear Drive 59 29/57 266 303 .590 .238 Hi Lift Great cam for 95-107” inches 10:2 compression ratio or
10-8200** Late Gear Drive 63/27 270 307 .590 .218 higher max torque and HP (2700-6500 RPM).
10-8153** Early Gear Drive 64 30/62 272 307 .640 .262 Hi-Lift Big cams for modified 95-116+ inch motors running 10:2 comp. ratio or higher.
Late Gear Drive 66/30 276 312 .640 .232 Heads must be set for .700 lift and modified for max air flow (3000-6500 +RPM).
*Note: Timing and duration listed for .053 cam lift. **Note: Requires S&S Gear Drive
Camshaft Kit for Twin Cam

Andrews TC Cam Upgrade Kit for converting all 1999-06 Twin Cam Big Twin to the 2006-17 roller chain drive with hydraulic chain tensioners. Instead of super pow-
ered spring adjusters the roller cam chain adjuster uses engine oil pressure to maintain proper chain tension and roller chain camshafts have larger journal bearing for
extra support on the sprocket shaft ends. Kit includes cams only and requires separate purchase of 2007-17 oil pump, support plate, chain tensioners sprockets and
hardware. See camshaft components page for additional parts required to complete conversion. Note: For 1999, 2000 and 2001 engines a rear cam drive sprocket
with an ignition trigger ring must be used.
Duration
VT No. Grind Timing* CL 0.053 0.020 Valve Lift Lift @ TDC Springs Application
10-6826 26N 11/35 102 226 262 0.490 0.138 Stock Bolt-in cam 88-95 inches and stock compression ratio. Great for two up tour-
41/09 106 230 266 0.490 0.120 ing, this cam will add torque and HP at lower and middle RPM ranges (1800-
5200 RPM).
10-6015 Sprocket with trigger ring for 1999-01 applications only
Camshaft for Evo

VT No. Year Application P/N Duration Valve Lift Valve Timing Lift @ TDC
Hydraulic @ 053 Open/Close
Intake Exhaust Intake Exhaust Intake Exhaust Intake Exhaust
84-99 Good for stock replacement EVL2000 220 214 .480” .456” 2/38 35/1 .059” .049”
10-5001 84-99 Good for two-up riding and pulling trailers EVL3000 224 224 .500” .500” 10/34 34/10 .080” .080”
10-5002 84-99 Good low end torque and midrange in EVL3010 234 234 .500” .500” 15/39 39/15 .096” .096”
stock motor
10-5006 84-99 Good performance with carburetor, pipes EVL3050 252 252 .510” .510” 22/50 50/22 .117” .117”
and springs. More top end.
Important Note: Some items on this page may be emission related parts subject to California or other emission control laws. Please see
165
Cam Kit for Twin Cam 10-7640
S&S Easy Start Cams

19-8010 19-8015
• Start any engine even with a stock starter
Andrews Twin Cam Steel Camshaft Drive Sprocket fits 1999-06. • Save your starter and battery
VT No. Type Sprocket Type • Reliable-tested for 10,000 consecutive starts and never ran down the
19-8010 34T Cam Key Drive battery
19-8015 34T Cam Spline Drive • Fully automatic no buttons to push
• Start any Twin Cam engine regardless of displacement or compres-
sion available in chain or gear drive versions-proven performance
again from an industry leader S&S, kits include cams, gear drive kit
(when required) and cam installation kit.
2007-16 FLT 99-06 Twin Series
2007-17 FXST-FLST-FXD Cam
gear drive kit gear drive kit
10-7640 N/A 640
10-7675 10-9675 675
10-5177 10-5160 10-4276
S&S Twin Cam Gear Drive Cams and Camshaft Kits increase valve timing accuracy by eliminating timing chain lash and also
reverses the rear cams direction of rotation providing additional operating clearance between cam lobes that will allow higher cam
lifts.Complete Cam Kits include cams, complete gear drive kit and cam installation kit.
Gear Drive Cams can only be used with gear drive kit and also must be used with adjustable pushrods and performance valve
spring kit.Cams only include inner gears. Outer cam drive gear kit must be ordered separately. Material must be removed from
the inner surface of the stock gear cover and crank case modification is required on .625” and .640 lift cams.
00-05 FXD 06-17 FXD-
00-06 FXST-FLST 07-17 FXST-FLST
00-06 FLT 2007-16 FLT
Series Valve Timing Valve Duration Valve Centerline Lift@TDC
Cams Complete Cams Complete (See Open/Close Open/Close Lift
Only Cam Kits Only Cam Kit Note#) Intake Exhaust Intake Exhaust Intake Exhaust Intake Exhaust
— 10-5182 — — 509G6 18°/18° 46°/11° 216° 237° .509” 90° 106°
10-5160 10-5177 10-5246 — 510G1 20°/38° 52°/20° 238° 252° .510” 99° 106° .187” .178”
— 10-5247 — 570G2 20°/40° 55°/20° 240° 250° .570” 100.0° 107.5° .187” .179”
— — 10-5248 — 585G3 20°/40° 60°/20° 245° 260° .585” 102.5° 110.0° .186” .176”
— — 10-5249 — 625G4 20°/55° 60°/20° 255° 260° .625” 107.5° 110.0° .189” .184”
— — — 10-5270 640G5 25°/60° 60°/25° 265° 265° .640” 107.5° 107.5° .228” .221”
— — 10-4268 — Outer cam drive gear kit
10-4275 — 10-4285 — complete gear drive kit includes pinion gear, front and rear inner cam gears and outer cam gear.
11-7715 adjustable pushrod set
11-2077 valve spring kit w/steel top collars
1. Camshaft Set 510G: designed for 88-95 cubic inch engines with compression ratio below 9.7:1
2. Camshaft Set 570G: designed for 88-95 cubic inch engines with compression ratio below 10:1
3. Camshaft Set 585G: designed for 88-95 cubic inch engines with compression ratios from 10 to 10.75:1
4. Camshaft Set 625G: designed for engines of 95 cubic inches or more with compression ratios between 10.0 and 10.75:1
5. Camshaft 640G: designed for engines of 95 cubic inches or more with compression ratios of 10.5-11.5:1
6. Camshaft 510G: designed for 88 cubic inches with stock compression ratio
S&S Twin Cam Adjustable Pushrods and Cam Installation Support Kit includes cam cover
Cover Kit. Chromoly pushrods feature simple gasket, two inner cam needle bearings, two outer
trouble-free installation that does not require cam bearings and a retaining ring.
the removal of gas tank or rocker assemblies. VT No. Type Years
Includes pushrods, gaskets, O-rings, retainer 12-0125 Gear 2000-05 FXD,
clips and upper pushrod covers that have been 2000-06 FXST FLST, FLT
designed to provide a more stable and rigid 12-0126 Chain As Above
cover assembly. Fits 2006-up FXD, 2007-17 12-5240 Gear 2006-17 FXD,
FXST FLST, 2007-2016 FLT. 2007-17 FXST FLST
VT No. Item 2007-2016 FLT
11-7715 Kit
11-7716 Pushrods Only
166 note for important information regarding emission control regulatory compliance and warranty information.
Pushrod Cover for Big Twins
BIG TWIN
Installed
11-0938 11-0376
Chrome Billet Pushrod Cover Set for
Twin Cam engines and includes seals and
O-Rings necessary. Replaces 18096-00.
Fits 1999-17 FXST, FLST, FXD and 1999- Replica Pushrod Cover Kit for Twin Cam
2016 FLT. models. Includes all pieces necessary for Chrome Billet Pushrod Cover and
VT No. Item installation. Twin Cam fits 1999-17 FXST, Tappet Base Kit for Twin Cam fits 1999-
11-0943 Billet Kit FLST, FXD; 1999-2016 FLT. 17 FXST, FLST, FXD and 1999-2016
11-9969 Inner Steel Tubes VT No. Finish FLT. VT No. 42-0937
11-0938 Chrome
11-0376 Black
11-1081 Titanium Plated
9942-16
Tappet Base Allen Bolt Sets for Twin
Cam without taper. Fits 1999-17 FXST,
FLST, FXD and 1999-2016 FLT. Chrome Billet Tappet Bases for Twin Twin Cam Chrome Tappet Top replaces
VT No. 9942-16 Cam models. Fits 1999-17 FXST, FLST, 17964-99 front and 17966-99 rear. Fits
FXD and 1999-2016 FLT. 1999-17 FXST, FLST, FXD and 1999-
VT No. 10-0815 2016 FLT.
VT No. 10-0811
Tappet
Crane Hydraulic Roller Tappet provides improved
10-0824 10-0820
RPM capability, superior reliability and quieter opera-
tion. Features include use of a precision, hardened
ball-type valve to provide superior sealing and lash
control. A rotating check ball prevents localized wear
and pitting. Fits 1999-up FXST, FLST, FXD, FLT.
VT No. 10-2200 Twin Cam or M-8 Replacement Hydraulic Tappet replaces
18538-99. Sold each. Standard size. Fits 1999-up FXST, FLST,
Jims Twin Cam or M-8 Powerglide Standard FXD, FLT.
Tappet Assemblies. Sold each. Fits 1999-up VT No. Brand
FXST, FLT, FXD, FLT. 10-0820 Sifton
VT No. Type 10-0824 Sifton Set
10-0568 Hydra II 10-1821 Sifton (anti pump)
10-0569 Hydro Solid II 10-1822 Sifton (heavy springs)
Twin Cam or M-8 V-Thunder Hydraulic Roller
10-0569
Tappet available in High Energy which is a per-
formance replacement for the stock tappet or Pro
10-0568 Magnum which is designed to perform at higher
engine speeds. Both feature a unique anti-pump up
Powerglide II™ Advantage for Twin Cam or M-8 models. Fits retainer designed to replace the stock retainer clip
1999-up FXST, FLST, FXD, FLT. which precisely limits plunger travel. Standard size,
VT No. Type Size sold each. Fits 1999-up FXST, FLST, FXD, FLT.
10-0568 Hydraulic Tappet Standard VT No. Item
10-0571 Hydraulic Tappet .005 10-8750 High Energy
10-1811 Hydraulic Tappet .010 10-8751 Pro Magnum
10-0569 Hydrosolid Tappet Standard
167
Rocker Arm Big Twin Rocker Arms include
bushings installed to fit Twin Cam
and Evolution. Fits 1984-17 FXST,
FLST, FXD and 1984-16 FLT.
VT No. OEM Exhaust/Intake
11-9511 17360-83 Rear, Front
11-9512 17375-83 Front, Rear
Rocker Arm Bushings replace
17428-57. Use on 1966-17 Big Twin
Sifton Roller Rocker Arm Set features drop forged models. Eight pieces.
construction with hardened steel roller. Fitted with bushings at VT No. Type
shaft area. Four piece rocker set. Fits Evolution and Twin Cam. 10-0700 Stock Split type
Order shafts separately. Fits 1984-17 FXST, FLST, FXD and 10-0700
10-2106 As Above, Sifton
1984-16 FLT.
VT No. Item Rocker Arm Shaft for Big Twins
11-0553 Arm Set 1984-17. Replaces OEM# 17611-83.
11-0571 Shaft Set Fits 1984-17 FXST, FLST, FXD and
1984-16 FLT.
Evo/Twin Cam Rocker
VT No. Brand U/M Size
Arm and Shaft Kit by
11-0571 Sifton 4 Standard
Sifton fits 1984-up Big Twin.
11-0576 Jims 4 Standard
Includes two (2) 17375-83
11-0814 Sifton Each .005
rocker arm, two (2) 17360-
Oversize
83 rocker arm and four (4)
17611-83 shafts. Fits 1984-
17 FXST, FLST, FXD and
1984-16 FLT.
VT No. 11-0572
For M-8
M-8 FLT Primary Gasket Kit for use with M-8 models that
measure 106 cubic inch. OEM # 25700746.
VT No. 15-1566
M-8 Cam Service Gasket Kit includes all necessary gasket

for servicing 2017-up M-8 engines. OEM# 25700731.
11-1080
VT No. 15-0570
Chrome M-8 Rocker Box Cover Set is forged aluminum and

features a chrome finish. Fits 2017-up FLT.
VT No. 11-1080
Tappet Block Set

fits M-8 models on
2017-up FLT and
2018-up FXST-FLST.
VT No. 10-0834
168
Parts for M-8
11-9665 11-9980
BIG TWIN
11-1213
11-0913 14-0784
11-1076
M-8 Adjustable Pushrod Conversion Kit includes chrome
covers, adjustable pushrod set and o-rings. These pushrods
are tapered for enhanced clearance at the cylinder head,
allowing the use of higher lift cams. The one-piece chrome
moly pushrod adds rigidity and durability and the threaded
adjustment feature provides easy cam installation without
removing the cylinder heads or rocker boxes.
VT No. Item
11-9980 Pushrods Only
11-0913 Lower Pushrod Cover Set
11-1076 Replacement Pushrod Cover Clip Set
14-0784 Pushrod Cover O-Ring Set
11-1407
Replica Pushrod Cover Kit for M-8 models. Includes all
pieces necessary for installation. M-8 fits 2017-up FLT, 2018-up
FXST, FLST.
M-8 Finish
11-1407 Chrome
11-1408 Black
11-1213 Titanium Gold Plated
Andrews M-8 Adjustable Pushrod Set features a tapered

end. Set is for use with high lift cams.
Fits 2017-up FLT, 2018-up FLST, FXST. VT No. 11-1208
M-8 Oil Pump

M-8 High Volume High Pres-
sure Oil Pump Assembly for
use on all 2017-up FLT and
2018-up FXST models this
pump assembly has been
designed to deliver 10% more
oil flow over the stock pump as-
sembly. OEM# 62400121 and
62400126.
VT No. 12-9808
169
Pushrod for Twin Cam 11-9708
Sifton Quick Install Pushrod Sets are designed to be

installed without removal of rocker boxes or cylinder heads.
Precision made from 4130 chromoly tubing. For Twin Cam. Fits
1999-17 FXST-FLST, FXD and 1999-16 FLT. VT No. 11-9708
11-9709
10-0786
11-0843
11-0865
11-0824
“Elevator” Solid Tappet Conversion Set raises the tappet

Performance Pushrod Sets for Twin Cam are E-Z install top for better pushrod angle of travel. Fits 1999-17 FXST-
type which are designed to be installed without removal of the FLST-FXD and 1999-16 FLT.
heads or rocker boxes. Rods feature chromoly tube construc- VT No. Item
tion with rolled thread adjusters. Fits 1999-17 FXST-FLST- 10-0786 Tappets
FXD and 1999-16 FLT. 11-0843 Pushrods
VT No. Brand 11-0865 Kit, see web for instructions
11-0824 Sifton Note: Pushrod covers only. S&S Twin Cam Adjustable Pushrods
11-9709 Complete Kit, Pushrods and covers and Cover Kit. Chromoly pushrods fea-
ture simple trouble-free installation that
11-9714 11-9715 does not require the removal of gas tank
or rocker assemblies. Includes pushrods,
gaskets, O-rings, retainer clips and upper
pushrod covers that have been designed to provide a more
stable and rigid cover assembly. Fits 1999-17 FXST-FLST-
FXD and 1999-16 FLT.
Sifton Taper Lite Adjustable Pushrods are with hardened VT No. Item
adjusters and ball ends. Designed to be installed without remov- 11-7715 Kit
ing gas tank, rocker box or camshaft cover. Set of four. Fits 11-7716 Pushrods Only
1999-17 FXST-FLST-FXD and 1999-16 FLT.
VT No. Type
11-9714 Steel
11-9715 Alloy
11-2088
Andrews Anodized Twin Cam E-Z Install Pushrods are

available in chromoly or aluminum. Installation does not
require removal of tank or rocker boxes. All are stock diam-
eter, so there is no cover interference. Fits 1999-17 FXST-
FLST-FXD and 1999-16 FLT.
VT No. Type
11-2088 Chromoly
13-9251 Springs
13-9251
170
Pushrod for
E-Z Pushrod Sets designed
to be installed without remov-
al of the heads or rocker
boxes. Rods feature chro-
Evo 1984-99
BIG TWIN
moly tube construction with
rolled thread adjusters. Fits SiftonTM Quick Install
Evo 1340. Pushrod Sets are
VT No. 11-7713 designed to be installed
without removal of rocker
Andrews E-Z Install Evo 80 boxes or cylinder heads.
11-9221
Pushrods are available in either Precision made from 4130
aluminum (6061T6) or steel (4130 chromoly tubing. Fits Evo
moly). Kits include four adjust- Big Twins 1984-99. VT
able steel or aluminum pushrods No. 11-9707
which will install without removing
tanks or rocker boxes.
11-9702
VT No. Type
11-9221 Aluminum
11-9536 11-9224 Chromoly Steel
Adjustable Evo Pushrod Sets.

VT No. Style Year
11-9536 Solid 1984-Early 85
11-9711
Tapered Adjustable Pushrods are manufactured from 4130

Andrews Pushrods available
steel with hardened adjusters and ball ends. Designed to be
in chromoly steel or aluminum,
installed without removing gas tank, rocker box or camshaft
adjustable or fixed type as
cover. Set of four. Fits Evo Big Twin hydraulic or solid.
noted. All are stock diameter, so
VT No. Brand
there is no cover interference.
11-9702 Rivera
VT No. Adjustable
11-9711 Sifton
11-9866 11-9866 Chromoly
7132-89 7132-96 Crane Adjustable Pushrods

made from aircraft grade 11-9542
seamless 4130 chromoly steel
tubing and heat treated to
Solid Tappet Adapter Kit permits use of hotter cam to run
128,000 psi tensile strength solid tappets by deactivating the hydraulic portion of the stock
for a stronger and lighter than tappets, uses stock pushrods for 1340 models.
stock pushrod. New style VT No. Fits
adjuster helps minimize the 11-9542 1984-Early85
effects of poor geometry found
in stock pushrods, the smaller 11-7710
diameter eliminates pushrod
“rub” completely. Set contains
two intake and exhaust push-
rods. These are not the time
saver type.
VT No. Fits
7132-89 With stock hydraulic tappets
7132-96 With long stroker cylinders
S&S Limited Travel Spacer Kit for Hydraulic 11-7711 11-7712
Tappets. Designed to maximize the efficiency of
V-Thunder Evo Pushrod Sets are made from .049 wall 4130
the stock hydraulic tappets. Kit consists of four
(4) machined heat treated and ground spacers
chromoly steel. Exacting tolerances for reliability. VT No.
when installed in the tappets. They reduce 11-7712 is a 2-piece style which can be removed or installed
the travel of the hydraulic unit in high RPM without disassembling heads. These rods fit stock or Velva
situations thereby eliminating potential damage Touch Tappet units. *Note: Saves time without the disassem-
to the engine due to high RPM valve float. Under normal conditions bling of the heads or tappet blocks
they allow the tappets to operate as designed resulting in low valve VT No. Application
train maintenance and minimal noise. VT No. 10-8532 11-7710 Stock
11-7711 Stroker
11-7712* Stock
171
1984-99 Evo Sifton Solid Tappet
Kit for Evo 1340
Tappets includes four (4)

solid tappets, stan-
dard size, with roll-
ers installed and
four (4) adjustable
pushrods.
VT No. 11-9630
11-0350 11-0356
Sifton Chrome 1986-99 Tappet and Pushrod Assembly Evo Big Twin Replacement Hydraulic Tappets.
includes four tappet units, four pushrods and a tappet base set Replaces OEM# 18523-86A. Sold each.
with screws and gaskets. VT No. Size
VT No. Type 10-8373 Standard
11-0350 Hydraulic 10-8374 .002
11-0356 Solid 10-8375 .005
Sifton Hydraulic Tappet
Assembly Sets of 4, fea- 10-8373
ture centrifugal surface fine
grinding and precision fit Tappet Roller Repair
rollers and pins. 10-2534
Kit includes four pins and
VT No. Size four roller assemblies.
10-0779 Standard VT No. Brand
10-0780 .002 10-2534 V-Twin
10-0781 .005 10-0529 Crane
Sifton Hydraulic Tappet Unit

Evo 1340 Solid Tappets can only be used with adjustable 10-0583
Sets feature maxi-axle roller
pushrods. Jims brand sold each. SiftonTM brand sold in set of
and pin design and unique
four.
“no-bleed” integral pump unit.
Jims Big Axle SiftonTM Size
Unique pump design features
10-0636 10-8256 Standard
full hydraulic action up to 5000
10-0637 10-8257 .005
RPM, then act as solid. Set of
— 10-8258 .010 Sifton four.
Jims Hydrosolid Big Axle Power Glide Evo VT No. Size
Tappet Assemblies have a Hydraulic Tappets 10-0583 Standard
built in anti-pump device, per- available as individ- 10-0584 .002
form like a hydraulic from start ual units replacing
up to about 5500 RPM and 18523-86 in stan- Hydrosolid Internals
turns into a solid at 5600 RPM. dard and .005. Hardened Pushrod Seat
Size VT No. 10-0645 Big Axle Size Oil Control Disk
Standard 10-0657 10-0645 Standard Hydraulic Cylinder Steel ground to 10 finish. Hand fit to .0002
.002 10-0658 using air gauge, the most accurate means of measurement.
The valve, super flat fit to hydraulic body
Spring to help control hydraulic body
Tappet body is heat treated and ground
The roller axle, crimped to 3000 PSI to stop inner race from turn-
ing. The axle hole is held perpendicular to the outside diameter
of the tappet within .002
Jims Powerglide Steady Roll Tappet feature a special bronze

alloy roller bushing in place of stock type loose needle roller
bearing.
Size 1984-98 FXST, FLT 1999-up FXST, FLST
Standard 10-1824 10-1827
.002 10-1825 10-1828
.005 10-1826 10-1829
172
Tappet Block
Tappet Block Set
BIG TWIN
fits 2018-up FXST-
FLST.
VT No. 10-0834
10-0815 fits
1999-17 FXST-
FLST-FXD and
Twin Cam Chrome Tappet Top replaces 17964-99 front and 1999-17 FLT.
17966-99 rear. Fits 1999-17 FXST-FLST-FXD and 1999-16
FLT.
VT No. Type Chrome Billet Tappet Bases for Twin Cam models. Gaskets
10-0811 Top Kit included. VT No. 10-0815
11-1403 Screw Kit
Tappet Base Allen Bolt Sets
for 1999-17 Twin Cam without
taper. Fits 1999-17 FXST-
FLST, FXD and 1999-16 FLT.
VT No. 9942-16
9942-16
8709-8T
Tappet Base Bolt Sets for Big Twin models.
1976-98 with Stock Tappet Blocks. ¼ — 20 thread without Tappet Blocks for Evo
taper.
VT No. Type Finish
11-9506
7628-8 Acorn Chrome
8726-8 Allen Chrome
8709-8 12 point Cadmium
8708-8 12 point Chrome
8710-8 12 point Black
8709-8T Hex Zinc
Billet Tappet
Blocks are
machined from solid
blocks. Made and Chrome Tappet Guide Set includes front and rear tappet
polished by Jims, guide. Fits all 1984-99 1340 Evo Big Twin.
sold pairs. Fits 1985- VT No. Item
99 1340 Big Twin 11-9506 Tappet Block Set
Evo. 15-1542 Gasket Kit
VT No. 10-0069 42-0458
42-0437
42-0437
Installed
Chrome Evo Tappet Covers fit over stock blocks. Each cover
has a slot which allows it to be installed without removing push-
rods. Install by lifting the pushrod tube cover and inserting the
covers. Fits 1985-99 Big Twins.
VT No. Type
42-0437 Steel
42-0458 Die Cast
173
Pushrod Cover and Seal for Evo
Chrome Pushrod
11-0909
Cover Set with
Installed
chrome tappet
base covers as a
complete dress up
kit for 1984-99 Big
Twin Evo.
VT No. 42-0903
11-0909 42-0903
Chrome Billet
Pushrod Cover
Kit fits 1984-99
Evo models.
VT No. 11-0945
11-0359
Chrome Head
and Spark Plug
Cover fits 1986-
11-1090 99 Evo models.
Installed Covers are held
in place by rub-
ber inserts sup-
plied.
VT No. 42-0929
11-1090
V-Twin Chrome Pushrod Cover Kits in stock style gives all

the parts needed for complete installation. All are sixteen piece
kits for 1986-99 Evo.
VT No. Finish
11-0909 Chrome
11-0359 Black
11-1090 Titanium
Head Bolt Cover Sets

37-8799 37-9131 37-9399
Chrome Head and Spark Plug Cover fits 1986-99 Evo mod-
els. Covers are held in place by rubber inserts supplied.
VT No. 42-0929
42-0772 42-0773
2024-4 2262-4 42-1092
Head Bolt Covers include four covers with set screws to con-
Head Lockers fit Big Twin Evo 1340 VT No. Year ceal 12 point head bolts on 1984-17 Evo and Twin Cam Engine
available shot peened natural alumi- 42-0772 1986-91 models.
num. Sold in a pair with two set screws 42-0773 1992-99 VT No. Finish Style Year
included to install. 9111-9 Chrome Acorn 1973-85
9113-9 Gold Acorn 1973-85
9112-9 Chrome Cap 1973-85
37-8799 Chrome Cylinder 1986-17
37-9399 Black Cylinder 1986-17
37-9131 Chrome Grooved Cylinder 1986-17
2024-4 Chrome Hex Dome 1986-17
2262-4 2262-4 Chrome Spike 1986-17
Installed 42-1092 Brass Spike 1986-17
174
Chrome Billet Pushrod Cover
Kit includes all pieces and seals
for complete installation on
Pushrod Cover
Components
BIG TWIN
1984-99 Evo Big Twin models.
VT No. 11-0947
11-9970
11-0913
Lower Pushrod Tube Sets.
11-0928 7508-20 11-1206 Chrome Plated
Replacement Chrome Upper Pushrod Cover Kits (Outer). Each VT No. Fits
kit contains 4 chrome clips, 4 springs, 4 cork gaskets, and 4 steel 11-0913 1984-99 Evo
washers. 9968-12 Twin Cam; 99-17 FXST, FLST, FXD, 99-16 FLT
VT No. Brand Fits 11-9970 Twin Cam; 99-17 FXST, FLST, FXD, 99-16 FLT
7508-20 Colony Evo
Inner Quad Pushrod Covers in zinc plated
7508-20T V-Twin Evo
steel.
11-0928 V-Twin Evo VT No. Brand
9970-20 Colony Twin Cam,1999-17 FXST, FLST, FXD,99-16 FLT
11-0908 V-Twin
11-1206 V-Twin Twin Cam,1999-17 FXST, FLST, FXD,99-16 FLT
9213-4 Colony
11-0915 11-0942 11-0917 13-0101 9969-4 Colony, Twin Cam
99-up FXST,FLST,FXD,99-16 FLT
11-0908 11-9969 V-Twin, Twin Cam, As above
15-0117 15-0116
12-1157 37-9078 37-9079 11-1073

Pushrod Cover Individual Parts, in chrome steel.
11-0915 Pushrod Cover Cups feature die-cast construction in chrome
VT No. Model U/M
or gold, set of four. 37-9078 37-9078
11-0915 1966-99 BT Clip Stock 4
VT No. Item
11-0942 1999-17 Twin Cam Clip 4
37-9078 Chrome Skull
99-17 FXST, FLST, FXD, 99-16 FLT
37-9079 Gold Skull
11-0917 1936-17 Cup 4
11-1073 Brass Hex
13-0101 Spring 10
12-0711 Washer, Inner 10
12-1157 Washer, Lower, Evo 20
15-0117 Large Cork 100
15-0116 Small Cork 100
Pushrod Seal Kits

14-0671 14-0681 14-0951 Blue Silicone Seals are lathe cut, then ground with
perfect outside diameter finish, to withstand heat, oil
and gas.
VT No. Item U/M
14-0028 Small Push Rod 50 pack
Pushrod Cover Cork-Seal Kits include enough pieces to seal 4 14-0029 Large Push Rod 50 pack
complete pushrod covers on years listed. Rubber seals. Pushrod Tube O-Rings, 10 pack.
James VT No. Model/Year VT No. Use Year OEM
14-0671 14-0951 1984-99 Big Twin Evo 14-0550 Lower 1984-17 1145
14-0686 14-0681 Twin Cam, 99-17 FXST,FLST,FXD, 99-16 FLT 14-0532 Upper 1984-98 1157
Pushrod Cover Rubber Seal Kit includes 14-0803 Upper 1999-17 111293
twelve (12) machined rubber seals for Big
Twin Evo for 1984-99.
VT No. Type
9529-12 Black
14-0981 Blue
175
Head Bolt & Stud for
1984-99 Evo
Chrome 12 Point Head Bolt Set includes 8 wash-

ers and 8 head bolts for 1986-91 FXST, FLST, FLT,
FXR, 1986-92 XL and 1991 FXD.
VT No. 37-9019
11-0634 37-9259
37-8141
Sifton Racers Evo Stud Kit has 8 inserts, drill tap and 8
chromoly studs. Allows more torque to be applied, to cure oil
leaks and protects case threads during frequent disassembly.
Detailed instructions included.
VT No. Item
11-0634 Complete Shop Kit
37-9259 8 Studs only
11-0636 8 Inserts only
37-8935 12-1187
37-9521
Components for One Head

37-8951
Head Bolts and Hardware Kits for Evo 1340 models for one VT No. 16-0911 VT No.16-0911 Tube Installed
head. Cylinder Oil Passage Drain Tubes for stock bore size cylin-
VT No. # OEM Item ders only. Each kit is supplied with tap, hex wrench, two drain
37-9521* 1986-91 Chrome Head Bolt Stud & Screw Kit tubes and instructions. Fits Evo.
37-9322 As Above 1992-99, zinc VT No. Item
37-8139 E 16478-83 Head bolt, Chrome, 8 pack 16-0911 Kit
F 16480-83 Screw Set, 1984-Early 1985 16-0912 Pair Replacement Tubes only
2011-8 E 16478‑85A Head bolt, Chrome, 8 pack
F 16480‑85A Screw set Late1985‑91 Big Twin
2012-8 E 16478‑85A Head Bolt Chrome, Colony, 8 pack
F 16480‑92 Screw Set 1992‑up Big Twin
37-8951 G 16837‑85A Studs only, 1986-99 Big Twin 8 pack
9424-8 G As above Colony, 1986-99 Big Twin
9424-8T As above Parkerized
37-9259 G As Above Sifton
37-8935 H 16573‑83 Insert, 8 pack
12-1187 I 16715‑83 Exhaust Stud, 5 pack
14-0516 J 26432‑76 O Ring, 10 pack
37-9074 D 16482‑83 Washer 1984‑Early 85, Zinc, 4 pack
37-9075 D 16482‑85 Washer Late1985‑92, Zinc, 4 pack
2017-8 D As Above Chrome, 8 piece
*Note: For Both Cylinder Heads
176
Rocker Box for Twin Cam
11-0946 Installed
BIG TWIN
11-2700
Chrome Rocker Box Set for Twin Cam, fits 1999-17 FXST,
FLST, FXD, 1999-16 FLT for two heads. 11-1086
VT No. Item
11-2700 Rocker Box Set
15-1502 Gasket Set
2024-4 2262-4 Rocker Box Set for Twin Cam. Includes two upper covers and
Evo/Twin Cam Head Bolt Cover. Headbolt covers to hide dull two lower housings. Fit 1999-17 FXST, FLST, FXD, 1999-16 FLT.
12 point headbolts. Installation with set screw. Fits 1999-17 Chrome Matte Black
FXST, FLST, FXD, 1999-16 FLT. 11-0946 11-1086
VT No. Style 11-0948
2024-4 Hex Dome
2262-4 Spike
Rocker Box Breather Kit fits
Twin Cam model. Replaces
17650-02. Fit 1999-17 FXST,
FLST, FXD, 1999-16 FLT. 11-1071
VT No. 11-0799
11-0799 11-0584
11-0354
Top End Components for Twin Cam. Fit 1999-17 FXST, FLST,
FXD, 1999-16 FLT.
VT No. OEM Finish Item
11-0948 17572-99 Chrome Upper Rocker Cover Set
11-1071 Black Upper Rocker Cover
11-0584 63815-99 Element
Wyatt Gatling Top Rocker Box Set for Twin Cam models.
Fit 1999-up FXST, FLST, FXD, 1999-16 FLT.
VT No. 11-0354 37-0043 Installed
37-0043
37-0585
Grooved Valve Cover Screw Cover for Twin Cam Set of 4,
match head bolt covers. Fit 1999-17 FXST, FLST, FXD, 1999-
16 FLT.
VT No. Item
37-0585 Cover Set
37-1209 Cover Set
37-0043 16 Piece Chrome Screw Set
177
Rocker Box for Evo
42-0787 42-0754
42-0754 Internal
42-0787 Internal
42-0356 11-2701
V2 Rocker Box Sets are precision die-cast covers that are

machined. Six piece complete set includes all necessary
gaskets for installation for both heads.
Chrome Black Fits
42-0754 42-0355 1984-91 11-2701
42-0787 42-0356 1992-99 Internal
Remove material
here to achieve
Install Slobber Stopper in this hole. correct alignment
Tap threads in this hole using tap
supplied in kit
Chrome Two Piece Rocker Box Set for 2 heads for 1984-99
Evo models.
Umbrella valve
VT No. Item
replace during
reassembly
Drain Hole Enlarge 15-1503 Gasket Set
with drill bit supplied
in kit 16-1673 Wrench Set
Rocker
Cover Chrome Rocker Cover Set fit all 1984-
Spacer Underside of outer rocker box
cover up Evo Big Twins. Set is vented out of
the crankcase or through the head type.
16-1069 Umbrella valves included for use on
1993-1999 cylinder heads. Set includes
16-0914 base and top cover, rocker shaft supports,
gaskets and mounting hardware.
VT No. Item
15-1221 Gasket Set
Sifton Evo Rocker Box Breather Upgrade Kit includes tap,
drill bit, breather tubes and instructions. Fits 1992-99 Big Twin.
VT No. Item Umbrella Valve fits inner rocker box
16-0914 Breather Upgrade Kit cover on 1992-99 Evo.
16-1069 Breather Tube Insert Set VT No. 14-0925
178
Rocker Box for Evo
43-9162
BIG TWIN
43-9128 43-9170
43-9169
Chrome Rocker Box Individual Parts for Evolution Big Twin.
VT No. Item Fits
43-9127 43-9127 D-Ring 1984-91
43-9169 D-Ring 1992-99
43-9146 Lower 1984-91
43-9128 Top 1984-91
43-9146 43-9162 Top 1984-91
43-9170 Top 1992-99
43-9178
CUBIC INCH CHART

STROKE 3¹⁄₂” 3¹³⁄₁₆ 3.968” 4¹⁄₄” 4¹⁄₂” 4⁵⁄₈” 4³⁄₄” 5.00”
74” 80”
2³⁄₄” 45”
B 3⁵⁄₁₆” 61”
3⁷⁄₁₆” 64.8” 73.7” 78.7” 83.4” 85.7” 88.0” 92.8”
O 3¹⁄₂” 67.2” 76.3” 81.6” 86.6” 89.0” 91.4” 96.1”
R 3⁵⁄₈”
3¹¹⁄₁₆”
72.1”
74.6”
81.7”
84.7”
87.4”
90.7”
92.9”
96.1”
95.5”
98.8”
99.0”
101.5”
103.2”
106.8”
E 3¹³⁄₁₆” 79.9” 90.6” 97.0” 102.8” 103.7” 108.9” 114.2”
3⁷⁄₈” 82.3” 93.4” 100.1” 100” 108.9” 111.9” 117.8”
4.00” 87.9” 99.7” 106.8” 113.0” 116.1” 119.3” 125.6”
4¹⁄₈” 93.4” 106.0” 113.5” 120.2” 123.5” 126.9” 133.6”
4¹⁄₄” 99.2” 112.6” 120.5” 127.6” 131.1” 134.7” 141.8”
1 cubic inch = 16.38 cc 43-0377

1 cubic inch = .0163871 liter Chrome Top Cover and D-Ring Set fits 1984-91. Order
Cubic Inch = πr2 x Stroke gaskets separately.
Chrome Year
r = ¹⁄₂ of Bore 43-9178 1984-91
43-0377 1992-99
Screw Set
Chrome Rocker Box Screw Set fits Evo Big Twin Lower Rocker Box
1985-99 Big Twin. Mounting Hardware Set incudes
VT No. Type all correct bolts, allen screws and
8868-16 Acorn washers necessary for bolting
9788-24 Button Head Allen lower rocker cover to cylinder head.
Complete set for two heads.
VT No. U/M
Rocker Box Screw Kit for Evo includes
11-0621 Set
chrome allen screws and washers, and 2078-18 Each
copper sealing washers. “Tru-Seal” Evo Rocker Box Chrome
VT No. OEM Item Cover Collar and Screw Kit includes
8931-16
8931-16 Allen Screw Kit sealing washers with built in O-Ring for
15-0663* 63858-49 Fibre Washer, 50 pack position seal.
15-0221 6114 Copper Washer VT No. 37-0820
179
Valve Spring Kit and Retainers
13-2085 Valve Spring Keepers Set. CNC machined and
heat treated in sets for two heads.
Fits 1984-04 Evolution and Twin Cam Big
Twins.
VT No. Brand
11-2096 Kibblewhite
13-2081
11-0805 Eastern
Fits 2005-17 Twin Cam FXST, FLST, FXD and
2005-16 FLT.
11-1233 Eastern
Fits 2017-up M8 FLT, FXST.
11-1232 Kibblewhite
Valve Spring Kits.
13-2082 13-2083 Includes all springs, collars
All Evo FX, FL 1986-98 by Kibblewhite and keepers necessary
13-2081 150-160 lb seat pressure, up to .550” valve travel
for each application. Fits
with titanium retainers
13-2082 150-160 lb seat pressure, up to .550” valve travel 1985-04 1340 Evo/Twin
with heat treated steel retainers Cam.
13-2083 150-160 lb seat pressure, up to .550” valve travel VT No. 13-9196
with hard anodized retainers
Valve Springs include inner and outer
with heat treated steel retainers
13-2140 170-210 lb seat pressure, up to .800” valve travel as required. Fits 1984-04 Big Twin
with titanium retainers Evo/Twin Cam. Replaces OEM 18201-
13-2141 170-210 lb seat pressure, up to .800” valve travel 83.
with hard anodized aluminum retainers VT No. 13-0104
with heat treated steel retainers 13-0650 13-0670 13-2088
Twin Cam 1999-2004 Mfg. by Kibblewhite
13-2022 170-180 lb seat pressure up to .600” valve travel
13-2060 190-210 lb seat pressure up to .650” valve travel
Twin Cam 2005-17 FXST, FLST, FXD, 2005-16 FLT
Mfg. by Kibblewhite Kibblewhite Beehive Valve Spring Kits.
13-2061 170-180 lb seat pressure up to .600” valve travel VT No. Lift Fits Retainer Type
with titanium retainers 13-0650 .600” 1984-2004 FXST, FLST, FLT, FXD Steel
13-2130 .610” 1984-2004 FXST, FLST, FLT, FXD Steel
13-0660 .630” 1984-2004 FXST, FLST, FLT, FXD Steel
11-0810 13-2150 .660” 1984-2004 FXST, FLST, FLT, FXD Steel
11-0811 13-0670 .600” 2005-17 FXST, FLST, FXD, 05-16 FLT Steel
13-2131 .610” 2005-17 FXST, FLST, FXD, 05-16 FLT Steel
13-0680 .630” 2005-17 FXST, FLST, FXD, 05-16 FLT Steel
Steel Valve Collars for 1984-04 1340 Evolution and Twin Cam. 13-2151 .660” 2005-17 FXST, FLST, FXD, 05-16 FLT Steel
VT No. OEM Use 13-2086 .465” 2017-up FLT M-8, 2018-up FXST, FLST Titanium
11-0810 18222-83 Lower 13-2087 .465” 2017-up FLT M-8, 2018-up FXST, FLST Steel
11-0811 18219-83 Upper 13-2088 .550” 2017-up FLT M-8, 2018-up FXST, FLST Titanium
Valve Spring Kits for Evo/Twin Cam

VALVE SPRING RETAINERS VALVE LOCKS
VT No. Description Lock Valve Stem Valve Spring VT No. Description Lock Angle Valve Stem
Angle Size Diameter Size
11-7401 Chromoly 10° All 1.437-1.500” 11-6164 Super Locks +.050 without recess for lock cap 10° 3/8”
11-7411 Chromoly 10°
All 1.500-1.550” 10° lock angle and is for all valve stems 10°
11-7321 Titanium Double Springs 10° All 1.500-1.550” 10°
SPRING KITS INCLUDE SPRINGS, LOCKS, RETAINERS AND LOWER SEATS

VT No. Application Description Outside Inner Pressure @ Pressure @ Coil Bind Retainer
Diameter Diameter Checking Ht. Opening Ht. Height
11-7703 1984-04 BT Good Street and Performance Spring up to .600” lift 1.460” .700” Lbs-160 In-1.850 Lbs-440 In-1.250” 1.200” Titanium
11-7705 1984-04 BT Performance Spring up to .709” lift 1.550” .710” Lbs-230 In-1.875 Lbs-700 In-1.200” 1.100” Titanium
note on Emission Page for important information regarding emission control regulatory compliance and warranty information.
180
Replica Valve
BIG TWIN
KIBBLEWHITE V-TWIN
Stainless REPLACEMENT
Model and Titanium
Application Black
Year Gold Coat TM
Diamond Racing (2) Nitrated Steel
Nitride
(1)
Stem
Intake
18074-83 — 11-6002 11-6018 —
Twin Cam and Evo O.S. As above — 11-6014 — —
1340 cc All Years Exhaust
18082-83 11-0802 11-6009 11-6019 11-0778
Intake
2005-17 FXST, 18074-05 — 11-6119 — —
FLST, FXD Exhaust
2005-16 FLT 18085-05 — 11-6120 — —
Intake — 11-1217 — —
2017-up FLT,
FXST M-8
O.S. As Above — 11-1218 — —
Exhaust — 11-1219 — —
11-0802 11-1219 11-6018 11-0778 Valves by Rowe or Kibblewhite. Intake valves are made of 8645 heat treated valve
steel and the exhaust valves are made of 21-2N heat treated non-magnetic stainless
steel. These valves are available with the following stems & heads:
(1) Black Diamond: One piece stainless steel valve with a Stellite tip and black
nitrone impregnated stem to improve wear properties and reduce friction.
(2) Racing feature a sharper profile angle to maximize flow, 11-6018 has 1.90 head
and 11-6019 has 1.63 head.
Valves
Manley’s “Street Master” Intake Manley Stainless Valve machined
and Exhaust Valves feature from 1-piece forging with a swirl
stainless steel construction, polished finish and chrome plated
chrome plated stems, hard tips, stem. Sold pairs. Fits All Evolution
Big Twin and 1999-04 Twin Cam.
smooth turned underhead angle
and radius, forged combustion
dish and machined combustion
face rim. Fits All Evolution/Big Twin and 1999-04 Twin Cam VT No. Type Head Diameter Stem Diameter OEM
(standard overall length). 11-9081 Exhaust 1.615 stock .3095 Standard 18082-83
VT No. Type Head Diameter Stem Diameter OEM 11-9086* Exhaust 1.615 stock .3095 Standard 18082-83
11-9061 Exhaust 1.615 stock .3095 stock 18082-83 11-9015 Exhaust 1.650 Oversize .3095 Standard
11-9060 Intake 1.850 stock .310 stock 18074-83 11-9082 Intake 1.850 stock .310 Standard 18074-83
11-9087* Intake 1.850 stock .310 Standard 18074-83
11-9228 11-9227 11-9084 Intake 1.940 Oversize .310 -.060
11-9610
*Note: Nitrate finish.
Valve Seats
Oversize Valve Seats can be used with
11-0641 unleaded gas. Replacement size is actual size
of seat supplied by V-Twin Number. Stock size
is noted as reference only.
VT No. Fits Stock Size
Manley Valve Related Kit for Evo models. 11-0641 1340 Evolution 1.948 x 1.632 x .400
VT No. Item Replacement Size 2.016 x 1.635 x .453
11-9610 Valve Key Set 11-0788 1340 Evolution 1.7135 x 1.379 x .400
11-9228 .600 Lift Kit Titanium Replacement Size 1³⁄₄” x 1³⁄₈” x ⁷⁄₁₆”
11-9227 .550 Lift Kit Steel
Valve Shims
Valve Spring Shims for Evo/Twin Cam
1985-04 are sold in 25 pack.
VT No. Width Andrews High Lift Valve .550+ Springs fits 1986-04 Big
10-8516 .030 Twin 1340 Evolution and Twin Cam. Andrews # 294150. No
10-8553 .060 machining required.
VT No 13-9251
181
Valve Guide
Fit All Evolution Big Twin and 1999-04 Twin Cam models
Kibblewhite Cast Iron
V-Twin Shouldered Guide Kibblewhite Kibblewhite Kibblewhite
Size Rowe Ampco 45 .420 top shortened up
Cast Iron Ampco 45 Cast Iron Manganese Bronze
to .600”
Intake Exhaust Intake Exhaust Intake Exhaust Intake Exhaust Intake Exhaust Intake Exhaust
STD — — — — 11-1182 11-1188 11-1019 11-1019 11-1014 11-1014 11-2316 11-2321
+.001 — — — — 11-1183 11-1189 11-1020 11-1020 11-1015 11-1015 11-2317 11-2322
+.002 — — — — 11-1184 11-1190 — — 11-1016 11-1016 11-2318 11-2323
+.003 11-0683 11-0683 — — 11-1185 11-1191 11-1022 11-1022 11-1017 11-1017 11-2319 11-2324
+.004 — — 11-1898 11-1898 11-1186 11-1192 11-1023 11-1023 11-1018 11-1018 11-2320 11-2325
+.010 — — — — — 11-1193 — — — — — —
Fit Twin 2005-17 FXST, FLST, FXD; 2005-16 FLT

Valve Seal
Valve Stem Oil Seal Kit includes
Size Kibblewhite Kibblewhite
four pieces of proper guide seal and
Ampco 45 Cast Iron
installation tool. Fits 1985-04 Big Twin.
Intake Exhaust Intake Exhaust
STD 11-1054 11-1057 11-1060 11-1063 VT No. 16-1745
+.001 11-1055 11-1058 11-1061 11-1064
+.002 11-1056 11-1059 11-1062 11-1065
Fit M-8 2017-up FLT, 2018-up FXST, FLST

Size Kibblewhite Kibblewhite
C630 Bronze Cast Iron Valve Stem Seals are sold in packs of 10 for years listed.
Intake Exhaust Intake Exhaust
Installation tools and plastic 10 pack sleeves available separately.
STD 11-1220 11-1226 11-1223 11-1229
+.001 11-1221 11-1227 11-1224 11-1230 VT No. Fits Mfg. No.
+.002 11-1222 11-1228 11-1225 11-1231 14-0164 Big Twin 1984-04 Evo 1400
Twin Cam
16-1751 Sleeve ⁵⁄₁₆
Installation Tools
16-1746 1984-04 Evolution Red
Rowe Unhoned Cast Iron Valve Guides Note: 14-0164 is ⁵⁄₁₆
Intake and Exhaust Guide is the same unless noted.
Size Rowe Iron Tru-Bore Guides I.D. Honed
Evolution 14-0969 14-0983
Big
Sifton Valve Stem Seal features a Viton seal with double coil
Diameter 1984-98 Evolution, 1999-04 Twin Cam
.200 spring for tension, and steel band to secure to guide.
Shorter VT No. Fits
Intake 14-0969 1983-2004 Evo/Twin Cam
.006 11-2111 11-1947 14-0978 Twin Cam; 2005-17 FXST, FLST, FXD; 2005-16 FLT
.008 11-2113 — 14-0983 Twin Cam; 2005-17 FXST, FLST, FXD; 2005-16 FLT
Top 14-1000 M-8 2017-up FLT, FXST, FLST
Diameter .531 .200”
14-0256 Veloprene Coated Valve
14-0257
Stem Seal Set provides
maximum valve stem oil control
as seals wipe excess oil from
Kibblewhite 80” Evolution Ampco 45 the valve stem by means of
Shouldered Valve Guides. Supplied with Viton *Note: Use with valve guide a unique spring loaded wiper
stem seal that locks into a machined groove on that a .620 top. assembly which prevents
guide. Can be used with up to .600” lift cam. unwanted oil from reaching
and contaminating the cylinder.
Intake Exhaust
Machining required.
Size VT No. VT No.
VT No. Fits Type
Standard 11-1044 11-1049 14-0256 1984-04 Crane
.001 11-1045 11-1050 14-0257 1984-04 Sifton
.002 11-1046 11-1051 14-0260* 1984-04 Crane
.004 11-1047 11-1052
182
Twin Cam Big Bore Kit
BIG TWIN
11-1523
M-8 Big Bore Black Cylinder Set with machined edge fins
increase the bore size from 124" to 128". These cylinders have
4.250 bore and require the use of Wiseco piston set 11-9983.
For use with stock 4.375" flywheels but require case boring.
Black cylinder set with machined edge fins also feature a
slightly larger fin area for better heat dissipation and increased
cooling.
11-1421
VT No. 11-1196
110” 11-1195 Twin Cam Stock Replacement
Cylinder available in black finish with
machined finish fins. Available for 96"
110" Motorshop 4" Big Bore Bolt-On Cylinder and Piston with 3.750" bore and 103" with 3.875"
Kit takes your 96" or 103 cubic inch motor to a full 110 cubic bore. Sold each. For use with stock
inches without removing the engine from chassis. 4" Big Bore stroke flywheels.
Cylinder and Piston package increases the internal bore VT No. OEM Engine Type
from 3⁷⁄₈" to 4", without increasing the outside diameter of the 11-1194 17458-07A 96"
cylinder spigot. The cylinder slips into the existing case bore 11-1195 17460-07A 103"
without modification. Kit will add a whooping 7 cubic inches of
displacement for more torque throughout the RPM range. This 107” TC-88 Big Bore
kit includes front and rear cylinder, system-matched pistons Cylinder Kit requires case
with rings. Fits 2007-17 FXST, FLST, FXD, 2007-16 FLT. machining and includes forged
VT No. Item 10.5:1 piston kit and either
11-1523 Complete Kit 11-1257 silver or black highlighted
11-1421 Cylinder Only, each cylinders. Fits 1999-06 TC-88
Gary Bang Top End models.
Gasket Kit for TC-95 and VT No. Item
TC-103 application. Fits 11-1257 Kit, Black
1999-2004 FLT, FXD, 11-1259 Kit, Silver
2000-2004 FXST, FLST.
VT No. 15-1471 107” 11-0287 Piston Kit
15-1375 Top End Gasket Kit
11-0329
11-0287 MC Forged Piston Sets for Big

Bore cylinders on Twin Cam.
Rings are included.
VT No. Size Ring Set 11-0331
(Standard) TC-88 Big Bore 95” Piston Kits sold in pairs, include rings,
— 98” 11-0290 clips and pins, available in flat top 9.3:1 compression ratio or
11-0287 107” 11-0291 high compression 10.25:1. Order gasket set separately.
Size 9.3:1 10.25:1 Type
Standard 11-0338 — Cast No Coating
Standard — 11-0331 Cast
Standard 11-0263 — Cast, V-Twin, Moly Coated
.005 — 11-0332 Cast
Head Gaskets 15-0376 15-0376
Top End Kit 15-0377 15-0377
Standard Ring 11-1354 11-1354
Cylinder Base Stud Set fits Twin Cam. Pin Lock 11-0856 11-0856
VT No. 2083-8
183
99-17 Big Bore Cylinder Kit for TC-88 or 96
11-1754
Wiseco Twin Cam Big Bore Piston Kit for 2007-17 Twin
Cam 96/103 bored to 1802cc (110 cu. in.) X-ring package
(10.5:1 comp. flat top) also fits 99-06 Twin Cam 88 with 4³⁄₈”
stroker crank. Kit includes top end gasket set. VT No. 11-0849
11-1755
95”
11-0075
15-1514
3⁷⁄₈" Big Bore Cylinder Kit increases displacement of the 11-2615

Twin Cam 96" to 103" cubic inches. Can be used on Twin Cam
96 models to produce 103 cubic inches with stock flywheels.
These cylinders require no crankcase machining and are fin-
ished and honed. Fits all 2007-11 Twin Cam 96" models with
stock stroke flywheels. Can also be used as a a stock replace-
ment cylinder set on 2012-17 Twin Cam 103" models includes
Wiseco piston kit.
Black Silver Compression
11-1754 11-1755 9:1
11-1752* 11-1753 10:1 Twin Cam 3⁷⁄₈ Big Bore Cylinder Kit increases displacement of
15-1514 Top End Gasket Kit Twin Cam 88 (1450) to 95 cubic inches (1550). These cylinders
*Note: Includes top end gasket kit. require no crankcase machining and are finished honed.
S&S TC-88 Carburetor, 10.25:1 Cast 9:1 Forged Finish
Pushrod and Piston Hot 11-0074 11-0880 Black
Setup Kit includes Super 11-0075 11-0881 Silver
“E” carburetor, adjustable 9.3:1 Cast
pushrod set, pushrod cov- 11-1575 Black
ers, 570G cam (.570 lift), 11-1563 Silver
cam gear drive set and 9.3:1 Cast 10.5 Forged Finish
gear cover gasket kit. Chromoly Coated
Installation of kit requires 11-2615 11-0882 Black, Sifton
stock bore cylinders to be bored out to 3⁷⁄₈” and will increase 11-2619 11-0883 Silver, Sifton
compression ratio to 9.7:1 with stock cylinder heads. Order pis- Gasket Set
ton kit separately. 15-0377 95”
VT No. 11-0027
184
Bolt-On Cylinder Kit Big Bore
83” Cylinder for
BIG TWIN
The Sifton cylinders have a very thick, large outside diameter,
“cast in” liner which has been proven to be an important factor
to maintain thermal stability which is the ability to retain the
important cylinder bore dimension through repeated heat cycles.
Evolution
Bolt-On Cylinder Kit
includes 10:1 compression
Wiseco forged piston kit fitted.
No case boring required. Fits
Evo 83”. 88” 11-0095
VT No. Finish
11-1253 Black
11-1258 Silver
11-1253 11-0156 Piston Set 11-0094
11-0157 Ring for 1 Piston
11-1513
KB PERFORMANCE PISTONS
11-2264
11-1513
11-2216
The Keith Black 390 Hypereutectic alloy is cast in a permanent steel mold
which makes it possible to build a light weight piston that makes more power 60-0165
and uses less fuel and lasts longer than any other type of piston being made
today. We can now forget about running loose, noisy, oil-burning pistons.
The low heat transfer of the alloy keeps the skirts cool so piston expansion is
minimal. Test engines have run with as little as .0005” (¹⁄₂ thousandth) piston-
to-wall clearance. The combination of a low heat transfer piston alloy and high
compression ring placement increases power and economy. The high ring
placement alone reduces detonation and increases the top ring temperature.
It is important to see our ring end gap instructions to avoid ring butting. 11-0533
The KB piston will make maximum power at 2 to 4 degrees less total timing 3⁵⁄₈” Big Bore Cylinder for Evolution motors with 4¹⁄₄” stroke
than conventional pistons. All KB piston sets are supplied with Hastings Moly forged pistons are with Hastings Rings pre-fit in the heavy wall
Ring sets. Safe top ring end gaps can be found by multiplying the bore
diameter by the appropriate ring end gap factor from the adjoining chart. cylinders. Cylinder Sets 3⁵⁄₈” and larger require case boring.
Example: 3.5” bore “Street Normally Aspirated” = 3.5” bore x .0065” = VT No. Ratio Piston Finish
.023” top ring end gap. 11-0094 9.25:1 Wiseco Silver
Note: Second ring end gaps do not need extra clearance
11-0095 9.25:1 Wiseco Black
Engine 1340cc 1340cc 1340cc
TC-96/103 11-1513 9.25:1 Sifton Silver
TC-88 FL-FX 60-0165 Machine Crankcase for above cylinder
Model Evolution Evolution Evolution TC-88
FL-FX 2007-17
Years FLH-FX FL-FX FL-FX
1999-06
FL-FX
FXST, FLST,
11-0532 Silver Cylinder, each
C.I.D. 1984-up 1984-up 1984-up 88” 11-0533 Black Cylinder, each
88” FXD, 2007-
Bore 80” 80” 80” 3.750”
Stroke 3.498 3.498 3.498
3.750”
4.00”
16 FLT 11-9948 Sifton Piston
4.00” 95”
Cylinder 4.250” 4.250” 4.250”
4.938”
4.938”
3.875”
Cylinder Base Sealing Kit
Height 5.550” 5.550” 5.550” 10.6:1 includes two double beaded
8.8:1 4.00”
Comp. Ratio 8.6:1 9.6:1 10.5:1
9.3:1 gaskets and two cylinder inserts to
Standard 11-2216 11-2257 11-2264 11-2269 11-2274 insure oil return.
.005 11-2217 11-2258 11-2223 11-2265 11-2270 11-2275
VT No. 15-1288
.010 11-2218 11-2259 11-2224 11-2266 11-2271 11-2276
.020 11-2219 11-2260 11-2225 11-2272
.030 11-2220 11-2261 11-2226 11-2268 11-2273 11-2278
Oil Fix Kit for Big Twin Evolution on
.040 11-2221 11-2262 11-2227
models includes two cylinder base
gaskets and two oil jet controls which
RING control the oil coming from the head
END PISTON TO WALL
APPLICATION
GAP CLEARANCE through the barrel and into the case, so
FACTOR the oil does not touch the base gasket
Street Normally Aspirated .0065” .00075”-.0015” thereby not leaking through the base
Street Nitrous or Supercharged .0080” .0015”-.0025”
gasket.
Flat Track Gasoline .0080” .0010”-.0030”
Flat Track Alcohol .0060” .0010”-.0030”
VT No. 15-0597
Drag Gasoline .0075” .0010”-.0030”
Drag Alcohol .0065” .0010”-.0030”
Drag Supercharged or Nitrous Gas .0095” .0015”-.0030”
Drag Supercharged Alcohol .0085” .0010”-.0030”
Drag Supercharged Fuel .0115” .0020”-.0040”
185
Cylinder for Stock
1984-99 Evo Cylinder
Kit
1340cc
bore
11-2618
11-2627
Cylinder and Piston Kits for Evo Late 1985-99 1340 cc are
honed and pre-fitted with stock compression cast pistons and
Hastings Rings. They are ready to run and will require break-in
as suggested in the appropriate shop manual. Sold in pairs for
stock stroke only. Order gasket set separately.
VT No. Finish Compression
11-2618 Black 8.5:1
11-2610 Silver 8.5:1
11-0594 Silver 11:1
11-2628
11-0345 11-0340
93.4” Cylinder Kit includes Wiseco 9.5:1 compression piston 1340cc Cylinders to fit Evo are sold each.
set with rings pre-fit to new 3.75” cylinders. Cases must be
VT No. OEM Finish
bored to accept this kit.
VT No. Finish 11-0345 16512-86A Black
11-2627 Silver 11-0340 16510-83A Silver
11-2628 Black 16-0911
11-1699 Piston Kit
16-0911
Tube 16-0912
Installed
Oil Passage Drain Tubes for stock bore size cylinders only.
Each kit is supplied with tap, hex wrench, two drain tubes and
instructions. Fit Evolution Cylinder.
VT No. Item
16-0911 Kit
16-0912 Pair Replacement Tubes only
Sifton Cylinder Drain Inner Filter for returning
top end oil. Features a stainless steel screen and a
ceramic magnet that will stop all ferrous debris from
common valve train wear and is most effective in
Big Twin 3⁵⁄₈” Big Bore Cylinder Kits by S&S are supplied stopping broken valve spring material from entering
with fitted forged flat top pistons, ring, wrist pins, head and
engines oiling system through cylinder drain. The thin wall
base gaskets. Stock crankcases must be machined to
steel dowel protects the magnet and provides proper head to
accommodate the larger spigot diameter. Available with natural
finish cylinders. Fit 1984-99 Evo. cylinder alignment. Fit Evo.
VT No. Finish Stroke Compression Displacement VT No. 40-0250
11-0064 Silver 4⁵⁄₈” 9.75:1 96”
VT Piston Kit
11-1694 Kit 10.5:1 88”
186
Piston Kit
BIG TWIN
Wiseco Tracker Series Piston Sets feature Armor Glide skirt coating for reduced friction, quieter
operation, pressure seal groove reduces ring lifting and power loss, forged piston crown with
generous valve pockets for big valves and cams, and precision at rings for ultimate sealing power.
Size Piston Kit Repl. Ring Repl. Wrist Pin Repl. Circlip
For 1999-06 Twin Cam 88" models bored to 1550cc (95" cubic inch) VM-Ring Package (9.5:1 comp.)
STD 11-1306 11-1422 11-9981 11-9774
.010 11-1307 11-1423 11-9981 11-9774
.020 11-1308 11-1424 11-9981 11-9774
For use 1999-06 Twin Cam 88" models bored to 1550cc (95" cubic inch) VM-Ring Package (10.5:1 comp. )
Stand 11-1309 11-1422 11-9981 11-9774
.010 11-1310 11-1423 11-9981 11-9774
.020 11-1311 11-1424 11-9981 11-9774
For use with 2012-17 Twin Cam 96" and 2007-13 Twin Cam 96 bored to 1691 cc (103" cubic inch) (10.5:1 comp. domed),
also fits 1999-06 Twin Cam 88 with 4 3/8" stroke crank
STD 11-1312 11-1422 11-9981 11-9774
.010 11-1313 11-1423 11-9981 11-9774
.20 11-1314 11-1424 11-9981 11-9774
For Evolution Applications
For 1984-99 1340cc Evo Big Twin X-Ring Package (8.5:1 comp.) Flat Top
STD 11-1315 11-9759 11-9778 11-9773
.010 11-1316 11-9762 11-9778 11-9773
.020 11-1317 11-9760 11-9778 11-9773
.030 11-1318 11-9764 11-9778 11-9773
For 1984-99 1340cc Evo Big Twin X-Ring Package (10:1 comp.) Domed Top
STD 11-1319 11-9759 11-9778 11-9773
.010 11-1320 11-9762 11-9778 11-9773
.020 11-1321 11-9760 11-9778 11-9773
.030 11-1322 11-9764 11-9778 11-9773
Established Decibel Levels as for Manufacturers

88 dB1969-72
86 dB 1973-74
83 dB 1975-85
80 dB 1986-up
Will Go Lower in the Future!
187
Piston Kit Moly Piston Kit
MC Moly Coated Piston Kits
11-0231 feature cast construction with
moly (moS2) coating which
helps reduce friction and wear,
while allowing adequate break
in. Hastings Moly Rings Set,
wrist pins and locks included.
*Note: Rings only 11-0859
2007-17 2007-13 1340 1340 Evolution

Twin Twin Evolution Evolution 3⁵⁄₈”
V-Twin Piston Kits include 2 cast alloy pistons, genuine Cam Cam 1984-99 1984-99 1984-99
Hastings 3 piece ring set, 2 wrist pins and 4 circlips. OHV 103” 96” Stock Stock 4⁵⁄₈”
Piston Set use 22588-78 pin lock, VT No. 12-0929 Size 9.6:1 9.2 Stroke Stroke Stroker
Standard Comp Comp Comp 8.5:1 11.1:1 9.25:1
Size 1340cc V2 3⁵⁄₈” Big Bore Ratio Ratio Comp Comp Comp
Evolution Evolution 3.875” 3.750” 3.498” 3.498” 3.625”
Stock Stroke 4⁵⁄₈” Stroke Bore Bore Bore Bore Bore
8.5:1 Comp 9.75:1 Comp Standard 11-0279 11-1702 11-9948*
Standard 11-0231 11-1709* .005 11-0888 11-0886 11-0280 11-1704
.005 11-0292
.010 11-0293 .010 11-0889 11-0887 11-0281
.020 11-0294 .020 11-0282
.030 11-0295
.040 11-0296 Wrist Pin Locks, sold as 10 pack. Fits 1983-99,
*Note: Rings Only 11-0859 replaces 22589-83.
VT No. 12-0949
Wrist Pin and Lock Kit fits 1985-99 Evolution,
replaces 22764-83.
VT No. 11-0871
Hastings Piston Ring Sets are

replacements for OEM ring sets and
will also fit our cast pistons. Available
in standard and oversized versions 11-1357
with either moly compression ring
and 3-piece oil control ring. Sold in 80” FL-FX Evolution Hastings
1340cc Patch.
sets for two pistons.
Mfg.# 6164 2M6164 VT No.
Cast Moly
Over 250,000 Sets Served! Standard 11-0190 11-1357
48-1479
88” Twin Cam; 1999-06 FXST, FLST, FXD, FLT .005 11-0191 11-1358
Mfg# 2M4942 Moly .010 11-0192 11-1359
Standard 11-1350 .020 11-0193 11-1360
.005 11-1351 .030 11-0194 11-1361
.010 11-1352 .040 11-0195 11-1362
.020 11-1353
95” Big Bore Twin Cam SHOP TIP Piston Installation
Caution: Do not install piston pin without lubricating it first with motor
Mfg. # 2M4951 Moly oil or assembly lube. Touch up outer edges of piston pins with emery
Standard 11-1354 cloth before installation.
.005 11-1355 1. Refer to applicable service manual for proper installation methods.
.010 11-1356 2. Piston should be measured front-to-rear at the base of piston skirt,
96” Twin (1584cc) 2007-17 FXST, FLST, FXD, 2007-16 perpendicular to wrist pin.
FLT 3. Piston should be set-up with the following tolerances:
Mfg# 2M4805 Moly Recommended piston/cylinder running clearances:
Standard 11-1397 Minimum Maximum Preferred
.005 11-1398 Evolution® Models .0015 .0022 .002
(Aluminum Cylinders)
.010 11-1399 Big Twin Models .0015 .003 .0025
103” Twin Cam (1690cc) 2010-17 FXST, FLST, FXD, (Cast Iron Cylinders)
2010-16 FLT Sportster Models .003 .004 .0035
Mfg# 2M4941 Moly (Cast Iron Cylinders)
Standard 11-1413 Specifications for ring end-gap are supplied with the ring sets and vary
.005 11-1414 by type and size.
.010 11-1415 Note: Run engine at moderate speeds for at least 500 miles, avoiding
excessive running in lower gears, in order to properly break in new
188 pistons and rings.
Forged Piston Kit
For Twin Cam Applications High Performance Forged Pistons
BIG TWIN
Description Piston Kit Repl. Ring Repl. Wrist (Each) Repl. Circlip (Pair) • Wiseco’s high-tech manufacturing ensures greater operating strength and
For 2012-17 Twin Cam 103 and 2007-13 Twin Cam 96 bored to 1691cc (103 cu. in.) VM-ring lower expansion at high temperatures
package (9:1 comp. reverse dome) also fits 99-06 Twin Cam 88 with 4 3/8” stroker crank. Kit • Evolution Kits include forged pistons with ArmorGlide™ coated skirts,
includes top end gasket set. Includes Armor coated pistons.
rings, retainer clips and chrome piston pins
Std. 11-1011 11-9923 11-9981 11-9774
• Twin Cam Kit are available with "Armor X" valve pocket coating that are
.010” — 11-9925 11-9981 11-9774
also features "Armor Fit" shirt coating or with ArmorPlating which improves
For 2012-17 Twin Cam 103 and 2007-13 Twin Cam 96 bored to 1691cc (103 cu. in.) VM-ring
package (9:1 comp. reverse dome) also fits 99-06 Twin Cam 88 with 4 3/8” stroker crank. Kit ring seal, eliminates ring micro-welding, and improves the piston’s ability to
includes top end gasket set. Includes ArmorX coated pistons. defend against detonation damage
Std 11-9972 — — — • Piston kits are available with X-Ring package (.062 top ring, .062
For 2012-17 Twin Cam 103 and 07-13 Twin Cam 96 bored to 1691cc (103 cu. in.) compression ring and .158 oil ring), or VM-Rings (1.2mm steel, positive
VM-ring package (9.6:1 comp. flat top) also fits 99-06 Twin Cam 88 with 4 3/8” stroker crank). Kit twist, gas nitrided top ring, 1.2mm cast iron, taper under-hook scraper ring
includes top end gasket set. Includes Armor Glide Coated pistons.
Std. 11-1214 11-9923 11-9981 11-9774 and 2.0mm three-piece, flex-vent oil ring with steel chrome-faced rails);
.005” 11-1215 11-9924 11-9981 11-9774 VM-Rings, X-Rings and XC-Rings will not interchange
.010” — 11-9925 11-9981 11-9774 •103” kits require cylinder boring; 110” kit requires big-bore cylinders and
For 2012-17 Twin Cam 103 and 07-13 Twin Cam 96 bored to 1691cc (103 cu. in.) case boring; X-Ring package (.0472” top ring, .0472” compression ring and
VM-ring package (9.6:1 comp. flat top) also fits 99-06 Twin Cam 88 with 4 3/8” stroker crank). Kit
includes top end gasket set. Includes Armor Glide Coated Pistons. .118” oil ring); recalibration required
Std. 11-9973 — — — Note: Replacement rings include rings for one piston only.
For 2012-17 Twin Cam 103 and 07-13 Twin Cam 96 bored to 1691cc (103 cu. in.) For M-8 Applications
X-ring package (9:1 comp. reverse dome); also fits 1999-06 Twin Cam 88 with 4 3/8” stroke Description Piston Kit Repl. Ring Repl. Wrist Repl. Circlip
crank. Kit includes top end gasket set. Includes Armor Glide Coated Pistons.
(2 Each Piston) (Each) (Pair)
Std. 11-1012 11-9923 11-9981 11-9774
.005” — 11-9924 11-9981 11-9774 For 2017-up M8 107 11:1 compression ratio. Positive dome 3.937”
As Above with Armor X Coated Piston bore with ArmorX coating. For use with 4.375”stock flywheel.
Std. 11-9957 11-9925 11-9981 11-9774 Std. 11-9976 — — —
For 2012-17 Twin Cam 103 and 07-13 Twin Cam 96 bored to 1691cc (103 cu. in.) X-ring package For 2017-up M-8 107 bored to 1875cc (114 cu in) 11.1 compression
(9:1 comp. reverse dome); also fits 1999-06 Twin Cam 88 with 4 3/8” stroke crank. Includes top ratio positive dome with Armor X coating. For use with 4.375” stock
end gasket set an Armor plated coated pistons.
Std. 11-9974 — — — flywheel. Requires cylinder boring. 4.080” bore.
For 2012-17 Twin Cam 103 and 07-13 Twin Cam 96 bored to 1691 cc (103 cu in) VM ring package Std. 11-9979 — — —
(10.5:1 comp. domed) also fits 1999-06 Twin Cam 88 with 4 3/8 stroke crank. Kit includes top end For 2017-up M-8 107 bored to 1918cc (117 cu in) 11.1 compression
gasket set. Include Amor X coated pistons.
ratio flat top with Armor X coating. For use with 4.375” stock
Std. 11-9958 11-9925 11-9981 11-9774
For 2007-17 Twin Cam 96/103 bored to 1802cc (110 cu. in.) X-ring package (10.5:1 comp. flat top)
flywheel. Requires cylinder sleeving and case boring. 4.127” bore.
also fits 99-06 Twin Cam 88 with 4 3/8” stroker crank. Kit includes top end gasket set. Std. 11-9982 — — —
Std. 11-0849 11-9981 11-9774
For 2017-up M-8 107 bored to 2035 cc (124 cu in) 11.1 compression
For 1999-06 Twin Cam 88 bored to 1550cc (95 cu. in.) VM-Ring Package. (9:1 comp.) Kit includes
top end gasket set. ratio dished top with ArmorX coating. For use with 4.375” stock
Std. 11-9938 11-9923 11-9981 11-9774 flywheel. Requires cylinder sleeving and case boring. 4.250” bore.
.010” 11-9940 11-9924 11-9981 11-9774
.020” — 11-9925 11-9981 11-9774 Std. 11-9983 — — —
For 1999-17 Twin Cam 88"/96"/103" bored to 1746cc (106 cu. in.) with 4 3/8" stroke crank (except
Twin Cooled™ Models)VM-ring Package(10:1 Comp. Flat Top). Kit includes top end gasket set.
Std. 11-9959 — — 11-9774 Note: All Wiseco Rings are sold per piston.
For 1999-17 Twin Cam 88"/96" Bored to 1596cc (97 cu. in.) with 4 3/8” stroke crank, VM-Ring
Package (10.1 Comp. Domed) Kit includes top end gasket set. Includes Armor plated coated
pistons.
Std. 11-9960 11-9774
For 1999-17 Twin Cam 88"/96" Bored to 1596cc (97 cu. in.) with 4 3/8” stroke crank, VM-Ring
Package (10.1 Comp. Domed) Kit includes top end gasket set. Includes Armor X coated pistons.
Std. 11-9975 — — —
For 99-06 Twin Cam 88 bored to 1550cc (95 cu. in.) VM-ring Package (10.5:1 comp.) Kit includes
top end gasket set. Note: Requires Screamin’ Eagle module on fuel-injected models
Std. 11-9918 11-9923 11-9981 11-9774
.005” 11-9919 11-9924 11-9981 11-9774
.010” 11-9920 — 11-9981 11-9774
.020” 11-9921 11-9926 11-9981 11-9774
.030” — 11-9927 11-9981 11-9774
For 1999-06 Twin Cam 88 VM-ring Package (10.5:1 comp.)
Std. 11-9928 — 11-9981 11-9774
.005” — 11-9934 11-9981 11-9774
.010” — 11-9935 11-9981 11-9774
.020” — 11-9936 11-9981 11-9774 11-9972
.030” — 11-9937 11-9981 11-9774
For Evolution Models.
Description Piston Kit Repl. Ring Repl. Wrist (Ea.) Repl. Circlip (Pr.)
11-9830
For 1984-99 1340CC Evo. Big Twin X-ring Package (10:1 comp.)
Std. 11-9895 11-9759 11-9778 11-9773
.005” 11-9896 11-9901 11-9778 11-9773
.010” 11-9897 11-9760 11-9778 11-9773
.020” 11-9898 11-9762 11-9778 11-9773
.030” 11-9899 11-9764 11-9778 11-9773
.040” 11-9900 11-9765 11-9778 11-9773
For 1984-99 1340cc Evo. Big Twin X-ring Package (8.5:1 comp.)
Std. 11-9830 11-9759 11-9778 11-9773
.010” 11-9831 11-9762 11-9778 11-9773
.020” 11-9832 11-9760 11-9778 11-9773 Wiseco Replacement Circlips fit all
.030” 11-9833 11-9764 11-9778 11-9773
.040” 11-9834 11-9765 11-9778 11-9773
Wiseco pistons, available in pairs.
For 1984-99 1340cc Evo. Big Twin X-ring Package (11:1 comp.) VT No. Bore
Std. 11-9840 11-9759 11-9778 11-9773 11-9773 3⁷⁄₁₆” & 3¹⁄₂”
.040” 11-9845 11-9765 11-9778 11-9773
For 1984-99 1340cc Evo. Big Twin Bored to 1438cc (88 cu. in.) X-ring Package (9.25:1 comp.) 11-9774 3³⁄₄”
Std.
.005”
11-9903
—
11-9908
11-9909
11-9778
11-9778
11-9773
11-9773
Wiseco Replacement Wrist Pins are
.010” — 11-9910 11-9778 11-9773 sold each.
.020 — 11-9911 11-9778 11-9773
.030” — 11-9912 11-9778 11-9773
VT No. Bore
For 1984-99 1340 cc Evo. Big Twin bored to 1530 (93.4 cu. in.) X-ring pack (9.5:1 comp.) 11-9778 3¹⁄₂”
Std. 11-1699 11-9971 — — 11-9981 3³⁄₄”
189
Cylinder & Base Gasket 15-0389 15-0392
Oil Passage Drain

16-0911 Tubes for stock
bore size cylinders
only. Each kit is
VT No. 16-0911 supplied with tap,
Tube Installed hex wrench, two
drain tubes and
instructions. For Evo GB Head Base Gasket Set for Evo with .040 head gasket.
16-0912 Cylinder. VT No. Base
VT No. Item
15-0389 Metal
16-0911 Kit
15-0392 Beaded
16-0912 Pair Replacement Tubes only Oil Fix Kit for Big Twin Evo models
GB Three Piece Rubber Coated Gaskets. A three piece design includes two cylinder base gaskets
that features a stainless center sandwiched between two rubber and two oil jet controls which control
coated stainless spring steel outer layers. The outer layers the oil coming from the head through
are embossed at the oil drain hole and cylinder bore area that the barrel and into the case, so the
provides a correct seal. Sold in pairs. Fits Evo Big Twin. oil does not touch the base gasket
thereby not leaking through the base
gasket. VT No. 15-0597
Cylinder Base Gaskets
1984-99 Big Twin
Size 3¹⁄₂” Bore 3⁵⁄₈” Bore 15-1101
.010 15-0483 15-0485
15-0483 .020 15-0484 15-0486
Metal Cylinder Base Gasket has a

steel base metal which has been coated
on both sides with a specially formulated
high temperature oil resistant rubber
compound. Silicone beading around the
15-0475 inner and outer perimeter forms a seal
Head Gaskets on both sides of gasket, pairs. Available
1984-99 Big Twin from James.
Size 3¹⁄₂” Bore 3⁵⁄₈” Bore 3¹³⁄₁₆” Bore 3³⁄₄” Bore VT No. Fits
.030 15-0475 15-0477 15-0479 15-0481 15-1072 Evo Big Twin
.040 15-0476 15-0478 15-0480 15-0482 15-1101 Evo 3⁵⁄₈” Big Twin
15-0659
Cam Cover
Quick Change Cam Gear Gasket & Seal Kit fits Shovelhead and Evo motors, includes both cork and
quad seals for pushrods to fit all year range.
James GB Fits
15-0871 15-0659 1970-92 Big Twin
15-0872 — 1993-99 V2 Big Twin
— 15-1214 Twin Cam, 1999-17 FXST, FLST, FXD, 1999-16 FLT
Head and Base Gasket

15-0414
Parker Gasket by Rivera for Evo 1340 15-0376

Cylinder Head Gasket features full copper
construction and integral O-Ring at critical GB Head/Base Gasket Set has .040 Cylinder Head/Base Gasket Set.
areas, using the principal of controlled special copper head gaskets and .007” VT No. Year Bore Thick Brand
compression when the cylinder base and thick aluminum base gaskets, will not 15-0414 1984-99 Standard .045” James
head is torqued down the metal maintains compress or torque. Kit includes two 15-0877 1984-99 3⁵⁄₈” .062” James
the correct diameter between the surfaces head and two base gaskets. 15-0376* 9.3:1 3.935”
requiring sealing while the boned flexible VT No. Fits 15-1234 4” S&S 4” .045” James
sealing material completes the seal. The 15-0312 1984-99 Evolution 80” 15-1235* Twin Cam Standard .045” James
base gasket is metal with an integral seal 15-0314 Sidewinder Big Twin Evo 15-1293* Twin Cam Standard .045” GB
of Viton molded to the metal gasket. Sold
*Note: 1999-up FXST, FLST, FXD, 1999-16
in pairs for base or head. 3⁵⁄₈” head.
VT No. 15-0731 FLT.
190
Top End Gasket Set
15-0377 15-0315
BIG TWIN
15-0654
14-0932 15-1329
15-0598
Rocker Box Gasket Kits include upper and lower gaskets in Cork or
15-0680 Molded O-Ring type with bolt seals and washers for both heads.
GB Top End Kits include all gaskets and O-rings including James GB OEM Type Fits
pushrod corks from the cylinder base and up. Perfect for piston 15-0845 15-0315 17033-83R Cork 84-91 1340 Big Twin
15-0847 15-0654 17038-90 O-Ring 84-91 1340 Big Twin
and valve jobs.
15-1361 –– 17038-90 O-Ring As Above
VT No. OEM Years Fits
W/Metal Rocker Box Gaskets
15-0598 17033-83 1984-91 V2 Evolution 15-0848 14-0932 17042-92 O-Ring 92-99 1340 Big Twin
15-0680 17040-92A 1992-99 V2 Evolution 15-1359 –– 17042-92 O-Ring As Above
15-0377 17052-99 1999-04 TC-88”/96” W/Metal Rocker Box Gaskets
15-1624 17052-99 1999-04 TC-88”/96” 15-1210* 15-1329* –– O-Ring 1992-99 Twin Cam
15-1471 17054-99 1999-04 TC-95 –– 15-1623* –– O-Ring As Above w/ 1 Piece
15-0001 17052-05 2005-17 TC-95”/103” EST Lower Rocker Gaskets
Gary Bang Top End *Note: 1999-up FXST, FLST, FXD and 1999-16 FLT
Gasket Kit for TC-95 15-1221 –– –– O-Ring S&S Two Piece
application. Fits 1999- Rocker Covers
2004 FLT, FXD, 2000-
2004 FXST, FLST.
VT No. 15-1471 15-0824
15-1369
James Top End Kits
VT No. OEM Type
Fits 1984-91 Evo
15-0824 17033-83 Veloprene Coated Head Gaskets/Cork Rocker Gaskets
15-0859 17033-83A .045” Veloprene Coated Head Gaskets/Rubber Rocker Gaskets
15-1369 17033-83A Includes MLS Head Gaskets/Rubber Rocker Gaskets
15-1191 3⁵⁄₈” Big Bore .045” Head Gaskets /Steel Base/Rubber Rocker Gaskets
Fits 1992-99 Evo
15-1362 17040-92 Includes MLS Head Gaskets
15-0825 17040-92A 045” Head Gaskets/Rubber Rocker Gaskets
15-1192 3⁵⁄₈” Big Bore .045” Head Gaskets/Rubber Rocker Gaskets
Fits 1999-04 TC-88”/96”
15-1351
15-1209 17052-99 .045” Fire Ring Head Gaskets/Rubber Coated Rocker
Cover Gaskets
15-1350 17054-99 .036 Fire Ring Head Gaskets/Rubber Coated Rocker
15-1345 Cover Gaskets
Fits 1999-04 TC-95”
15-1351 17054-99 Includes MLS Head Gaskets
15-1352 17054-99 Includes .036 Veloprene Coated Head Gaskets
15-1354 17052-99 Includes .046 Veloprene Coated Head Gaskets
15-1343 17052-99 .040” MLS Head Gaskets/Rubber Coated Rocker Cover Gaskets
Fits 2005-09 Twin Cam
15-0001 Top End Kit, Gary Bang
15-1353 17054-05 Includes .036 Fire Ring Head Gaskets
15-1344* 17052-05 .045” Fire Ring Head Gaskets/Rubber Coated Rocker
Cover Gaskets
Fits 2005-17 Twin Cam 95”/103”
15-1349* 17054-05 Includes .036 Veloprene Coated Head Gaskets
15-1357* 17052-05 Includes .045” Veloprene Coated Head Gaskets
15-1345* 17054-05 MLS .040” Fire Ring Head Gaskets/Rubber Coated
Rocker Cover Gaskets
*Note: 2005-17 FXST, FLST, FXD and 2005-16 FLT
191
Complete BT 15-0513
Gasket Set
GBTM Complete Gasket Kits are produced of the finest materials and
include all of the gaskets, seals and O-rings necessary to rebuild each
model listed. Models which require quad pushrod seals include the genu-
ine quad type. Head gaskets are Veloprene Coated, all other components
are stock replacement type. 15-0638
Fits Big Twin Evo 15-0529
GB Complete Engine
15-0513 17035-83A 1984-88 4 and 5-Speed FXST
15-0638 17035-84B 1984-88 5-Speed FXR/FLT
15-0529 1989-91 5-Speed FXR/FLT
15-0518 17035-89 1989-91 5-Speed FXST
15-0679* 17041-92A 1992-99 All Twins
*Note: Does not include primary side gaskets 15-0518
Gary Bang is credited with creating the first motorcycle aftermarket catalogue but his love of motorcycling began in 1948 when
his dad bought him a Cushman motor scooter. By 1954 he was working parts at Kolbe Cycle in Reseda, California and in ‘65
he began traveling as a road rep for MC Supply. He traveled for a few years learning everything there was to know about the
industry.
Gary discovered that California was way behind the Midwest in the custom business. Many of the bikes on the floors of those
Midwest shops were customized, so in 1967 he found a 1,200 square foot building in Canoga Park, Ca. where his first retail
shop was opened. He sold parts for Triumphs and other popular motorcycle brands, specializing in spokes and custom wheel
building.
In the early 1970’s Gary noticed that the majority of young Harley riders were into chopping and customizing their motorcycles.
There was nowhere for these guys to find the product so Gary decided to give them what they wanted. He took out an ad in
Big Bike magazine letting everyone know that they could order a Gary Bang Parts catalogue for $1.00. The people finally had
a company that had what she or he needed. And if Gary didn’t have it, he knew where to find it, or have it made.
In 1982 Gary opened a Harley-Davidson retail store in Atascadero, California where he works with his wife Mary, daughters 15-0679
Kristy and Lisa, and his granddaughter April.
Motor Gasket Sets

15-1169 15-1208
15-1246
15-0808 15-1339 15-1342
James Complete Motor Gasket Sets do not include primary gasket or seal. *Note: 2005-17 FXST, FLST, FXD and 2005-16 FLT
VT No. OEM Years Models
15-1169 17035-83B 1984-91 Big Twin (Rubber Rocker Gaskets/.062” Veloprene Coated Head Gaskets)
15-1360 17035-83 1984-91 Big Twin (Includes MLS Head Gaskets)
15-0808 17041-92A 1992-99 V2 Big Twin (Rubber Rocker Gaskets/.062” Veloprene Coated Head Gaskets) 15-1431
15-1358 17041-92 1992-99 V2 Big Twin (Includes MLS Head Gaskets)
15-1208 17053-99 1999-04 TC-88 Big Twin (Includes. 046” Fire Ring Head Gaskets)
15-1431 17053-99 As Above, Gary Bang
15-1355 17053-99 1999-04 TC-88 Big Twin (Includes .036” Head Gaskets)
15-1347 17055-99 1999-04 TC-88 Big Twin (Includes. MLS Head Gaskets)
15-1348 17055-99 1999-04 TC-88/95 Big Twin (Includes .036” Veloprene Coated Head Gaskets)
15-1246 17055-99 1999-04 TC-88 1550 Big Bore (Includes. 046” Fire Ring Head Gaskets)
15-1339 17053-05 2005-09 TC-88/96 (Includes. 045” Fire Ring Head Gaskets)
15-1340 17053-05 2005-09 TC-88/96 (Includes. 036” Fire Ring Head Gaskets)
15-1341* 17055-05 2005-17 TC-95/103 (Includes MLS Head Gaskets)
15-1342* 17055-05 2005-17 TC-95/103 (Includes .036” Veloprene Coated Head Gaskets)
15-1346 17055-05 2005-17 TC-95/103 (Includes .045” Veloprene Coated Head Gaskets)
192
6-Speed Conversion Transmission
17-0462 17-0473
BIG TWIN
17-0778
Replacement 6-Speed Gear Set includes all parts pictured.

Fits 6-Speed V-Twin Transmission Only.
VT No. Type
17-0462 Complete
17-0473 Partial
Right Side Drive

1986-99 Softail 6-Speed Conversion Kit includes complete
assembled 6 Speed transmission with chrome mount plate,
chrome top and chrome end cover, chrome inner and outer
primary covers, full clutch pak and 1.7 kw chrome and
polished starter with shaft assembly. Right Side Drive kit
includeS hydraulic clutch side cover. Transmission accepts
electric speedometer sensor (not included).
VT No. 17-0778
Right Side Drive 6-Speed Transmission

17-0455
17-0454
Motor Shop Ready York 6-Speed FXST Right Side Drive

Transmission Assembly with hydraulic clutch for 1991-99
models. Features include either polished, natural or black
wrinkle finish case, chrome top and side cover, full width gears,
machined shift forks, heavy duty trap door, precision ground
gears with back cut dogs and pulley. Each unit is completely
factory assembled to OEM specs. Unit is stock ratio 1st gear
and overdrive 6th gear .86 :1. Accepts 1996-up speedo sensor
17-0561. Order hydraulic clutch handle assembly and hydraulic
line separately. RSD is the only way to make a balanced big tire,
big horsepower creation. Uses a 10 mm banjo bolt on hydraulic
line with a ¹¹⁄₁₆” master cylinder.
Hydraulic Case Finish
17-0454 Black
17-0455 Natural
18-0672 Hydraulic Handle
193
5-Speed Big Twin 17-0597 12-0366 17-9940
Transmission
VT No. OEM # Item
17-9946 — 52 Transmission Door 1987-99 Polished Billet
12-1178 601 1A Roll Pin
17-0519 62375-57 53 Fitting, Upper Cover, each
17-0512 3784 1 Set Screw Fork
17-9853 6003 54 Thrustwasher 1 3/16” x 3/8” x 5/16”
37-9195 6016 2 Washer 11/32” x 11/16” x 1/16”
12-0366 8876A 55 Bearing, 4 pack
12-0562 7515 3 Jam Nut 7/16” x 1/4” x 11/16”
17-0538 35068-79 56 Spring Plate
12-0938 11016 5 Retaining Ring, 10 pack
17-7652 35025-79B 57 As Above Andrews
12-0948 11083 6 Retaining Ring, 1979-99
17-9857 35026-79C 58 Andrews Gear, Mainshaft 2nd and Countershaft
12-0992 11319 6 Retaining Ring, 2000-up
3rd, 1979-93
12-0299 9114 7 Right Cam Shifter Bearing
17-9922 35026-79C 58 As Above (V-Twin)
12-0298 9115 8 Left Cam Shifter Bearing
17-9858 35027-79B 59 Andrews Gear, Mainshaft 3rd and
17-9854 33119-79B 9 Adjusting Screw Shifter Arm
Countershaft 2nd, 1979-93
17-9855 Set 10 8 Pieces, 1 Each Thrust Washer Assortment
17-9860 35028-79B 60 4th Gear Mainshaft 1979-93
17-0530 33205-80 10 .017 Shift Thrust washer
17-0558* 35028-94 60 As Above 1994-up High Contact
17-9861 35029-79 61 Fifth Gear, Mainshaft 1985-84, Andrews
17-9862 34029-85A 61 Fifth Gear, Mainshaft 1985-90, Andrews
17-9942 35029-91A 61 Fifth Gear, Mainshaft 1991-93, Andrews
12-9997 35051-89 62 1991-up Bearing 5th Gear
12-0336 8904 62 1984-90 Needle Bearing 5th Gear
17-9899 35042-85 65 Mainshaft, 1985-89, Andrews
17-8238 35042-90 65 Mainshaft, 1990 Belt, Andrews
37-9134 3993 11 Bolt 1/4”-20 1 1/4” Hex Head
17-9943 35042-91 65 Mainshaft, 1991-06 Belt, Andrews
37-9135 6736 12 Washer 9/32” x 5/8” x 1/16”
17-9848 35064-79 66 Spacer, Mainshaft
17-0597 33320-98 13 Shifter Cam
17-0526 35622-79C 67 First Gear Countershaft
17-0514 33332-79 14 Support Shifter Cam Right
17-9859 35625-79B 68 Fourth Gear Countershaft 1979-93, Andrews
17-0515 33326-79A 15 Support Shifter Cam Left, each
17-0559* 35625-94 68 As Above 1994-up High Contact
21-2057 34084-86 16 1986-01 Lever, Shifter Shaft with 17-18
17-9849 35629-79B 69 Spacer
17-0576 — 16 As Above, V-Twin Includes
17-9863 35626-79A 70 3.24 stock 1st gear for countershaft, Andrews
2, 5, 17, 20, 21, & 56
17-9897 35632-79 71 Countershaft Andrews
17-0547 34082-79 17 Pin, Shifter Shaft Lever
17-0529 35632-79 71 Countershaft, Sifton
13-0131 34083-79A 18 Spring, Shifter Shaft Lever
17-0544 35632-79 71 Countershaft V-Twin
17-0516 34085-79A 19 Cam Follower
8907-5 — 72 Top Screw Kit, Chrome Allen
17-0578 37086-79 20 Pawl, Shifter Cam, V-Twin
8907-5T — 72 Top Screw Kit, Chrome Allen
13-0132 34087-79A 21 Spring, Shifter Shaft Lever
8909-13 — 73 Side Cover Kit, Chrome Allen
17-1169 34088-87 22 1986-99 Shifter Shaft
8909-13T — 73 Side Cover Kit, Chrome Allen
17-9932 34088-79 22 1979-86 Shifter Shaft
37-8985 — 74 Filler Plug, Chrome
13-9176 34089-79 23 Spring
32-9065 33900-59C 75 Neutral Switch, 1979-97
17-8081 34191-79D 24 Shifter Fork
32-0069 33902-98 75 Neutral Switch, 1998-99
17-8082 34193-79D 25 Shifter Fork
15-0685 33043-80 76 Switch Washer
17-8083 34195-79D 26 Shifter Fork
14-0821 12035A 77 Seal
12-0338 8998 27 Bearing, each 1979-99
37-9133 6497HW 78 Washer
12-0388 8992A 27 Bearing, each 2000-up
12-0950 11150 79 Retainer Ring
12-0951 10998 29 Retaining Ring
17-0966 33715-85A 80 Shift Lever, Chr. 1985-96 FLT, FXST, FLST, FXR, FXD
12-0158 8873 30 Ball
17-0968 33849-97 80 Shift Lever, Chr. 1997-up FLT, 1997-2017 FXST, FLST, FXR, FXD
N/A 25452-87A 31 Inner Ramp, 1987-99
18-3210 25453-87A 32 Outer Ramp, 1987-99
17-9941 34091-85 82 Inner Race
15-0172 36801-80 33 Gasket, Side Cover, 1980-86
17-0594 34091-06 82 Inner Race, 6 Speed
15-0240 36801-87 33 Gasket, Side Cover, 1987-06
17-0603 34091-08 82 Inner Race, 2008-up
18-3211 34920-86 34 Coupling
8408-1 35211-36 83 Sprocket Nut
8408-1T 35211-36 83 Sprocket Nut
17-9850 35076-79 36 Spacer
14-0922 6007 84 Nylon Washer
12-0557 35078-79 37 Nut, Mainshaft/Countershaft
12-1172 375 85 Dowel Pin
43-9131 37105-87A 38 Chrome Clutch Release Cover
18-3212 8998 86 Ramp Kit includes 29-30-31-32-34
1987-99 FXST-FLT-Dynaglide
12-1199 609 87 Pin
17-9846 37109-87A 38 Chrome End Cover 1987-94 FXR
14-0149 12045 88 Shift Shaft Seal
43-0131 37104-84 38 Chrome End Cover 1980-86 FXR
12-0959 634 89 Door Pin
37-8934 734, 739 39 Plug, 1987-97
17-9931 35628-79 90 4th Gear Spacer, 1979-83 only
40-0498 60328-98A 39 Plug, 1998-up
12-0212 37523-85D 91 Clutch Hub Key 1985-89
15-1272 Plug Washer, 1980-up
*Note: 1994-up gears can be used in earlier transmissions but only in matched sets.
5-Speed
43-9136 34468-86A 40 Upper Chrome Cover, 1987-97
43-9097 34731-86A 41 1986-88 Transmission Case FXST
The Cases Include Parts Listed 42-49
12-1197
12-0339
12-0337
11733
8977
8978
42 Mounting Stud
43 Needle Bearing
44 Mainshaft Bearing, 1980-83
Transmission 5-Speed Transmissions fea-
12-0361 8996 44 Mainshaft Bearing, 1984-00
12-0426 8996A 44 Mainshaft Bearing, 2001-06 ture stock style case. FXST
17-9852 33114-79 45 Spacer solid mount style with full
14-0534 11165 46 Seal assembled internals. Top and
17-0546 33334-79 47 Spacer, Sprocket 1979-84
17-9851 33334-85 47 Spacer, Sprocket 1985-93
late style clutch release cover
17-0560 33344-94 47 Spacer, Sprocket 1994-06 are chrome. Note: Choose
14-0157 12050 48 Seal, 1984-Early1994 clutch pack for mainshaft and
14-0962 12067A 48 Seal, Late1994-up 5th gear for appropriate years.
12-0952 11161 49 Snap Ring, 1985-00
12-0926 11057 49 Snap Ring, 1980-84 17-0003 features natural case
15-0237 34904-86A 50 Gasket, Upper cover finish.
15-0213 35652-79B 51 Housing Gasket 17-0003 VT No. Mainshaft/5th
17-9940 — 52 Transmission Door 1979-86 Billet
17-0003 1991-93 FXST
17-0014 1996 FXST
194
5-Speed Transmission Parts
BIG TWIN
Shifter Parts
Chrome Steel Inner Shifter Lever
Includes stainless allen screw and
washer.
VT No. Fits
17-0966 1985-96 FLT, FXST, FLST 17-0576 17-0590 17-0596
17-0966 17-0968 1997-up FLT,
1997-17 FXST, FLST 17-0604 17-0605
17-1009 2006-11 FXDWG
17-0968 This V-Twin part is a steel forging. In this process, the steel is first fired as a red hot
ingot. Next a huge air hammer compacts and orients the grain structure into a rough
shape of the part. Subsequent hits form the part into its final shape. After which it is
machined and heat treated which results in greater strength and resistance to wear.
V-Twin supplies many products which are of forged construction, including connecting
rods. Frame components and kicker arms.
5-Speed Big Twin Transmission Shift Pawl Assembly
includes shift shaft with lever, pin, lever and shaft springs and
17-0666 pawl as pictured. *Note: Anti overshift type
17-0666 VT No. Fits
17-0576 1986-06 FXST, FLST, FLT, 1991-05 FXD
17-0590 1986-01 FXST, FLST, FLT, FXD
17-0596* 1986-01 FXST, FLST, FLT, FXD
17-0604 2002-05 FLT, FXD, FXST, FLST
17-0605 2006-up FXST, FLST, FLT, 2006-17 FXD
5 Speed Shifter Fork Set fits 1986-06
Billet Shift Arm fits 5 Speed 86-96 ST 85-94 FXR 91-96 FXD
FXST.
Big Twin transmission.
VT No. 17-8391
VT No. 17-0666
195
5-Speed Transmission Gears and Shafts
17-0550 17-0558 17-9950 17-0526
C E G
A B D
F 17-0559 I
J 17-0529
H
5-Speed Transmission Gears and Shafts, Stock Ratio. 5-Speed Stock OE

Gear/Shaft OEM V-Twin Eastern Andrews Jims Year # Gear Box includes
First Mainshaft 35025-79B 17-0550 — 17-7652 17-0562 1979-06 A both left side bear-
2nd Mainshaft 35026-79C 17-9922 — 17-9857 — 1979-93 B ings and one seal.
3rd Countershaft Will accept original
As Above 35026-94 17-9952 — — — 1994-06 B components. Fits
High Contact* 1986-88 FXST, silver.
3rd Mainshaft 35027-79B 17-0549 — 17-9858 — 1979-93 C Replaces 34731-86.
2nd Countershaft VT No. 43-9097
As Above 35027-94 17-9953 — — — 1994-06 C
High Contact*
4th Mainshaft 35028-79B — — 17-9860 17-0568 1979-93 D Transmission Mount Case Studs are
5th Mainshaft 35029-79 17-0577 — 17-9861 — 1979-84 E heat treated as original. Available for
5th Mainshaft 35029-85A — — 17-9862 — 1985-90 E 1984-99 5-Speed.
5th Mainshaft 35029-91A — — 17-9942 — 1991-93 E
VT No. OEM Brand
5th Mainshaft* 35029-94 17-9950 — — — 1994-06 E
Mainshaft 35042-79 17-9920 — 17-9898 — 1981-84 F 12-1197 11733 V-Twin
Mainshaft 35042-85 17-0579 — 17-9899 — 1985-89 F 9863-5 11733 Colony
Mainshaft 35042-90 — — 17-8238 — 1990 only F
Mainshaft 35042-91 17-0543 — 17-9943 — 1991-06 F
1st Countershaft 35622-79C 17-0526 — — — 1979-06 G
4th Countershaft 35625-79A 17-0527 — 17-9859 17-0565 1979-93 H
4th Countershaft* 35625-94 17-0559 — — — 1994-06 H 17-9828
5th Countershaft 35626-79B — — 17-9863 — 1979-93 I
5th Countershaft* 35626-94 17-9951 — — — 1994-06 I 5-Speed Close Ratio 2.94 Low
Countershaft 35632-79 17-0544 17-0529 17-9897 17-0574 1979-06 J Gear Set closes the gap between
Countershaft 17-0548 — — — Shorter J 1st and 2nd. Adds about 5 MPH
*Note: 1994-up gears can be used in earlier transmissions but only in matched sets. of usable 1st gear. Replaces
35025-79C 1st mainshaft, 35622-
1994-06 FXST, FLST, FLT, 1994 FXR, 1994-05 FXD
79C 1st countershaft.
Gear/Shaft OEM V-Twin Andrews Year # VT No. Type
High Contact* 35026-94 17-9952 — 1994-06 B 17-6100 Andrews
2nd Mainshaft/3rd gear 17-9828 V-Twin
High Contact* 35027-94 17-9953 — 1994-06 C
3rd Mainshaft/2nd gear 17-0584
High Contact*4th gear 35028-94 17-0558 — 1994-06 D
5th Mainshaft* 35029-94 17-9950 — 1994-06 E
Transmission Mainshaft 35042-91 17-0543 17-9943 1991-06 F
4th Countershaft* 35625-94 17-0559 — 1994-06 H
5th Countershaft* 35626-94 17-9951 — 1994-06 I
*Note: 1994-up gears can be used in earlier transmissions but only in
matched sets. With 2.94 1st Gear
17-6105
Twelve Piece Gear Sets
V-Twin Andrews Andrews Year U/M
with stock with stock with 2.94
1st 1st 1st
Gear Set A-J 17-0584 — 17-6105 1991-06 Set
Gear Set A-J — 17-6018 17-6090 1990 Set
Complete Gear Set with 2.94 1st Gears.
VT No. 17-6105
196
5-Speed Transmission Gasket Kit
17-1020
Transmission
17-8000
BIG TWIN
5-Speed Jims Hardware and Rebuild Kit includes bushings,
locks, keys and snap rings for completing as 5 speed transmis- 17-8001
sion rebuild. James gasket set included.
VT No. Year
17-1019 1980-Early84
17-1020 Late1984-90
17-1021 1991-98
17-1035 1999-06
15-0841 15-1619
17-8000 17-8001
GB™ Big Twin 5-Speed Builder’s Kits include all parts noted
by each illustration.
VT No. Type
17-8000 Internal Small Parts Kit
17-8001 Shifter Shaft Drum Assembly, 1979-97
15-0641
15-1620
Transmission
Sprocket Oil
Gasket and Seal
Kit fits 2001-05
15-0767 FXD.
Transmission Gasket Sets. Complete gasket and oil seal kits VT No. 15-0767
listed below for individual application.
James GB No. OEM Fits
15-0841 15-0619 33031-82 1980-84 Big Twin 5-Speed
15-0841 15-0641 33031-85 1985-99 Big Twin 5-Speed
15-0842 15-0762 33031-91 1991-98 Dynaglide FXDB-S James Transmission 5-Speed
15-0843 15-0763 33031-93 1993-98 FLHT, FLT Seal Kits.
15-1211 15-0764 33031-99 1999-06 FLT, 1999-00 FXD, VT No. Year
2000-06 FXST, FLST 15-1166 15-1166 1984-93
15-1391 15-0767 33031-05 2001-05 FXD 15-1167 1994-06
15-1392 15-1619 — 2006-17 FXD
Big Twin Transmission
15-1393 15-1620 — 2007-13 FLT
Sprocket Oil Seal Kit for
5-Speed Big Twin Main Drive Gear Oil Seal 2006-17 FXD and 2007-17
and Spacer Kit features three lip seal and FXST, FLST, FLT.
coated sprocket spacer. The coating provides VT No. 15-1276
superior surface lubricity and increased cor-
rosion resistance. Fits 1994-06 as a replace-
ment or on ratio change on earlier models
with late pulley. VT No. 17-0752
Mount Plates
1986-99 Softail 5-Speed Chrome 17-6651 17-9999
17-6658
Transmission Plate Kit includes
chrome transmission mount plate
with chrome installation hardware.
VT No. Item
17-9994 Kit Chrome Steel Transmission Mount Plates.
Bolt Kits VT No. OEM Fits Finish
9867-18 Zinc 17-6651 Custom Fits Rigid mount Zinc
9866-18 Chrome 5-Speed Transmission
9866-18T Chrome in 4-Speed, Frame
1” Offset Transmission Plate 17-6658 Custom Fits 4-Speed Transmission Chrome
for custom applications. May in 5-Speed, Frame
need fabrication. 17-9999 Stock 1986-99 FXST-FLST Chrome
17-0859 VT No. 17-0859
197
End Cover 43-0791
43-9131 43-0540
43-0790
43-0792 5-Speed Big Twin Chrome

43-0537 43-0787 Transmission Side Cover and Top
Cover Set includes chrome allen
screws and chrome allen dipstick.
VT No. Year Model
43-0790 1987-99 FXST-FLST
43-0791 1987-94 FXR
43-0792 2000-06 FXST-FLST
17-9846
8907-5 Dynaglide
Top Cover Screw Kits 9785-9 1991-05 Acorn
FXST-FLST 9789-17 1991-05 Allen
8404-27 1980-85 Acorn 9789-17-P As Above Polished
8906-5 1980-85 Allen
43-0131 8907-5 1988-99 Allen
8907-5T 1988-99 Allen
8910-5 1987 Acorn
8912-13 8911-5 1987 Cap
8922-5 1988-99 Cap
9951-12 2000-06 Acorn
9951-12
9952-11 2000-06 Allen
9952-11-P 2000-06 Polished Allen
8908-15
17-9956 17-9946 17-9940 17-8300
Chrome Clutch Release Covers. Order release kits separately.
VT No. OEM Fits/Item
43-9131 37105-87A 1987-99 FXST-FXD
43-0540 1987-99 Billet Type
17-9846 37109-87A 1987-94 FXR Chrome Cover
43-0537 37105-99 2000-06 FXST
1999-05 FXD Sifton Big Twin Billet Transmission Door fits 5-Speed mod-
43-0787 37116-06 2006-17 FXD, els 1987-99, and includes bearings pressed in with appropriate
2007-17 FXST retaining rings.
43-0131 37104-84 1980-86 Chrome Cover VT No. Years Item Type
Release Cover Screw Kits 17-9956 1987-99 Complete 5-Speed
8908-15 1980-86 Allen 17-9946 1987-99 Door Only 5-Speed
8909-13 1987-06 Allen 17-9940 1979-86 Door Only 5-Speed
8404-27 1980-86 Acorn 17-8300 2006/07-up Door Only 6-Speed FXD/Softail only
8912-13 1987-06 Acorn
15-1050 Gasket, 1980-86
15-1051 Gasket, 1987-99
Dipstick
40-0932
17-0789
40-0941 17-0958
Chrome Transmission Filler Dipsticks.
2006-17 FXD, 2007-17 FXST, FLST
VT No. Style
40-0932 Hex
42-0456 42-0457 17-0789 Allen
40-0941 Knurl
Chrome Big Twin Transmission Dress Trim fully covers end
17-0958 Hex
cover and inner door.
VT No. Year 17-0353 9885-2 9885-2T 40-0456
42-0456 1987-99 FXST
42-0457 1987-99 FXR
1987-2006
17-0353 Allen
9885-2 Allen 37-8985 17-0872
9885-2T Allen
37-8985 Allen
40-0456 Hex
198 17-0872 Hex Plug (No Dipstick)
5-Speed Kicker Kit 5 and 6-Speed
Top Cover
BIG TWIN
17-0858
43-9136
Installed
43-9136
43-0504 43-0786
17-0876
Installed
5-Speed Kick Starter Kit features slim profile design. Pushrod

modification may be required. Order kick starter arm and
pedal separately. Fits all 5-Speed FXST, FLST, FLT and FXD
replacement OEM transmissions. Chrome 5-Speed Transmission Top Covers.
VT No. Item VT No. Year Model
42-1020
17-0858 Kit 43-9136 1987-99 FXST, FXR
17-0883 Black Kit 43-0504 2000-06 FXST, FLST
17-0876 Kit with arm 43-0786 2007-17 FXST, Softail
17-0857 Gear Set 2006-17 FXD
17-0989 Inner Clutch Ramp 12-1968
17-0869 Shaft, 1” longer Chrome Oil Fill Cover fit 2006-17 FXD. Replaces 62511-06.
12-1968 Bearing VT No. 42-1020
13-0123 Replacement Spring 17-0989
17-0353 Dipstick
15-0688 Gasket Kit
5-Speed Kick Starter Installation

Tool. Save time when installing
5-Speed conversion units, because
the complete transmission does not
have to be dismantled. Mainshaft
and clutch pack can remain in place.
Reduces labor from 6 to 3 hours.
VT No. 16-0756 199
1998-17 Clutch Pack Assembly
18-0133
1998-06
Big Twin Clutch Pack Assemblies feature stock

style components for a complete clutch overhaul.
VT No. Fits
18-0133* 1998-06 FXST, FLST, FLT, FXD
18-0723 2006-09 FLT
18-0595 2011-17 FXST, FLST, FXD
2011-12 FLT
18-0589 *Note: 1998-01 FLT models with EFI will require
separate purchase of 25 tooth motor sprocket VT
1998-17 Big Twin Clutch Parts. Clutch Drum “J” has “W” Ring Gear
No. 19-0416 for installation.
installed.
VT No. OEM # Item 18-0134 18-0130 18-0595
12-0585 2980 A Screw (6 used)
12-0563 7848W B Locknut
12-0923 11096 C Retaining Ring
17-9252 37069-90 D Pushrod Release Set
37088-90 18-0723
37090-98
Big Twin Clutch Packs feature stock style components for a
18-0169 37090-98 F End, Rod, Left only
18-3623 37312-75 G Bearing, Kit includes complete clutch installation.
37313-80 Thrust Washer (2) VT No. Year Model
11096 Retaining Ring 18-0134 1984-Early 85 FXST, FLST, FLT, FXR
12-9914 37496-90 H Mainshaft Nut 18-0130 1985-90 FXST, FLST, FLT, FXR
18-0171 37550-98 I Clutch Hub (V-Twin), 1998-06
18-0131 1991-93 FXST, FLST, FLT, FXR, FXD
18-0588 31626-06 I Clutch Hub, 2007-10
18-0592 37554-11 I Clutch Hub, 2011-17 18-0132 1994-97 FXST, FLST, FLT, FXD
18-0180* 37702-98A J Clutch Drum Only, 1998-06 FXST, 18-0133* 1998-06 FXST, FLST, FLT, FXD
FLST, 1998-05 FLT, FXD 18-0723 2006-09 FLT
18-0161* 37707-98A J Clutch Drum As Above 18-0595 2011-17 FXST, FLST, FXD
Includes Q and R
2011-12 FLT
18-0193 J Clutch Drum Only, 2007-10 FXST
*Note: 1998-01 FLT modes with EFI will require separate pur-
FLST, 2006-09 FLT, 2006-10 FXD
chase of 25 tooth motor sprocket 19-0416 for installation.
18-0589 J Clutch Drum As Above
Includes Q and R 18-0171 Clutch Hub.
18-0456 J Clutch Drum Only, 2011-13 FLT VT No. Year
18-0593 J Clutch Drum Only, 2011-17 FXST, 18-0171 1998-06
FLST, FXD 18-0588 2007-10
18-3252 37871-98A K Diaphragm Spring (BTE) 18-0592 2011-17
18-8317 37871-98A K Diaphragm Spring
18-0163 37872-98 K-1 Spring Retainer
18-0164 37883-98 M Damper Spring Seat 18-0588
18-0165 37884-98 N Damper Spring Big Twin Starter Ring Gears for
18-8257 37903-90 O Release Plate replacement on stock clutch drums only.
18-8258 37904-90 P Retaining Ring, External
18-8259 37905-90 Q Retaining Ring, Internal Note: Bolt on types include bolts. 18-8319
1990-99 FXST, FLST, FLT VT No. Year Teeth
1990-94 FXR 18-8307 1991-93 66T
1991-03 FXD 18-8308 1994-97 102T
18-0455 37905-00 Retaining Ring Internal 18-8319 1998-06 102T
2000-17 FXST, FLST
2000-16 FLT 37-0018 Allen Bolt
2003-17 FXD
18-1221 Easy Starter Kits for Big Twin Models.
12-0160 37906-90 R Bearing 1990-10 Improves starting on high compression big inch
12-0178 37906-11 R Bearing 2011-17
18-8261 37909-90 S Retaining Ring, Internal 1990-99
engines through an improved starter-to-clutch
18-3251 37913-98 T Steel Plates (8) basket gear ratio. Complete kits include a
18-0166 37912-98A U Pressure Plate Kit clutch basket with bearing for Big Twin models
18-3250 37932-98 V Plate Set (9) with 66-tooth starter ring and a 9-tooth starter
18-8319 W Starter Ring Gear 1998-06 pinion gear.
18-0596 W Starter Ring Gear 2006-17
*Note: 1998-01 FLT modes with EFI will require separate purchase of 25
VT No. Year
tooth motor sprocket 19-0416 for installation. 18-1220 1994-97
200 18-1221 1998-06
32-9201 9T Gear
Clutch Parts for
1991-97
BIG TWIN
Big Twin
Big Twin Clutch Parts for 1991-97.
VT No. OEM # Item
12-0563 7848W A Locknut
12-0923 11096 B Retaining Ring
17-9250 37069-90 C Pushrod
37088-90 Release Set
37090-84A
18-3253 37090-84A E End, Rod, Left only
18-3623 Kit F Bearing Kit
37312-75 Bearing
37313-80 Thrust Washer
11096 Retaining Ring
12-0160 12-9914 37496-90 G Mainshaft Nut
18-0159 37550-90A H Clutch Hub, V-Twin
18-8263 37707-90 I 91-93 Clutch Drum with Gear, OE
18-8310 37707-90 I As Above, V-Twin
18-8311 37707-94 I 94-97, Clutch Drum w/Gear, V-Twin
Note: Order bearing for above separately VT No. 12-0160
18-8308 102T I Ring Gear Only
18-0131
18-3234 37871-90 J Diaphragm Spring
18-3267 Heavy J Diaphragm Spring
18-8256 37872-90 K Spring Seat
18-8257 37903-90 L Release Plate
18-8258 37904-90 M Retaining Ring, External
18-8259 37905-90 N Retaining Ring, Internal
12-0160 37906-90 O Bearing
18-8260 37908-90 P Retaining Ring, Internal
18-8261 37909-90 Q Retaining Ring, Internal
18-3231 37913-90 R Steel Plates (6), Barnett
18-8255 37912-91 S Pressure Plate
18-3230 37911-90 T Plate Set (8), Barnett
18-8262 37977-90 U Spring Plate, Smooth
18-8313 37977-90 U Spring Plate, Smooth
18-8307 — V Ring Gear 1990-92
18-8308 — V Ring Gear 1993-97
18-0159 Clutch Hub replaces stock
units. Replaces 37550-90A.
18-0132 Fits 1991-97.
VT No. 18-0159
Primary Drive Assembly

Primary Drive
43-1002
Assembly Kit
includes clutch
pack assembly,
chain, chrome
inner and outer
primary covers with
all bushings, seals,
spacers, gaskets
and mount screws
Complete Clutch Pack Assembly. including the starter
VT No. Years Model jack shaft assem-
18-0131 1991-93 Big Twin bly.
18-0132 1994-97 Big Twin VT No. Years
43-1002 1994-97
43-1000 1998-06
201
1984-90 Big Twin 18-0134 18-0130
Clutch Parts
Complete Clutch Pack Assembly.

18-2156 VT No. Fits
18-0130 L1985-90
18-0134 1984-Early 85
18-8170
1984-90 Big Twin Clutch Hubs feature the updated factory
construction which has a machined steel center with aluminum
outer splined ring, secured by allen screws, with steel studs
welded in place. Order related hardware separately.
1985-90 1340 Big Twin Clutch Pack Hardware. 18-8153 37550-84A 1984-90 V-Twin
VT No. # OEM Item 18-8170* 37550-84 1984-90 V-Twin
12-0563 A 7848W Nut, 5 pack *Note: Early style hub with aluminum studs
18-3259 B 37357-84 Adjusting Screw for Stock
18-3253 B 37090-84A Adjusting Screw for 18-3680
17-9246 BB Kit Rod Set, 1985-86
17-9248 BB Kit Rod Set, 1987-89
17-9249 BB Kit Rod Set, 1990
12-0564 C 37496-84 Nut, Mainshaft
12-0212 D 37523-85 Key, 10 pack
18-8153 E 37550-84A Clutch Hub, V-Twin
18-3641 F&M 37702-84A 84-Early85 Clutch Drum with Ring Gear
18-2156 F&M 37707-84A Late85-90 Clutch Drum with Ring Gear
18-8290 G 37875-86A Diaphragm Spring
18-0186 FF Kit 1984-Early85 Drum/Hub Assembly
18-0187 FF Kit Early1985-90 Drum/Hub Assembly 1984-89 Big Twin Clutch Hub Kit includes updated reinforced
18-3680 H 37901-84A Pressure Plate steel center clutch hub, steel drive plate set and friction plate set.
18-3255 I 37902-86B V-Twin Adjuster Plate VT No. 18-0541
18-3215 J 37903-84 Release Plate 1985-90 Clutch Hub Sleeve is a rein-
12-0953 K 37904-84 Retaining Ring External forcement ring for hubs at the tapered
12-0954 L 37905-84 1984-97 Retaining Ring Internal end. Sleeve is pressed on with beveled
12-1375 L 37905-84 1984-97 Retaining Ring Internal, 5 pack side out toward inner primary, after
12-0308 M 37906-84 Bearing clutch drum with bearing is set over
18-8240
12-0955 N 37907-84 Retaining Ring, 10 pack hub, so that clutch drum and hub will be
18-1147 O 37931-84 Friction Disc, 6 pack installed as one unit.
18-1148 P 37975-84 Drive Disc, 7 pack VT No. Type
37-8944 Q 2881W Bolt and Washer 18-8240 Aluminum one piece type hub
37-9272 R 6242W Washer 18-8241 Steel two piece type hub
18-3623 S Kit Bearing Kit 18-8241
12-0923 T 11096 Retaining Ring
12-0588 Sealed Clutch Drum Bearing for belt drive
applications on Big Twins.
(D) VT No. Years
12-0587 1985-90
12-0588 1991-17 FXD, FLST, FXST
Clutch Drum and Hub Assembly. Bearing and

snap ring are installed in drum. Starter ring gear
offset dimension shown (D).
18-0186, VT No. Year Starter Ring Offset
18-0187 18-0186 1984-Early85 1.670
18-0187 Late1985-90 2.087
202
Big Twin Clutch Pack
Complete Clutch Pack fits 2011-17
York Pro-Clutch
BIG TWIN
FLST, FXST, FXD and 2011-12 FLT.
Kit includes clutch hub, thrust washer,
spring washer and retaining ring, clutch
spring seat, spring damper spring seat,
damper spring, release place, internal
retaining rings, double row ball bearing,
clutch pressure plate, 8 clutch plates,
and 9 friction plate kit.
VT No 18-0595
20-0549 20-0550
16-0310
20-0580
20-2051
York Pro-Clutch converts old style clutch packs to smooth modern

diaphragm spring function. Available for early chain or belt drive with
wet or dry clutch. Kit includes clutch hub with bearing, clutch discs (fric-
tion and steel), diaphragm spring, spring retainer, pressure plate and
four shoulder bolts. 1984-up kits utilize existing clutch basket, supplies
Pro-Lock Clutch Kit features a positive engaging ball ramp a clutch hub to allow use of clutch plates that increase surface area by
activation system, this applies extra pressure to the clutch 100% to reduce slipping.
plates and prevents clutch slippage without any increase on VT No. Year Type
the lever pull effort by changing the fulcrum point. 20-0549 1984-89 Big Twin Chain
Fits straight into the stock clutch basket and behind the stock 20-0550 1990-97 Big Twin Chain
20-0580 1998-06 Big Twin Chain
primary cover. Replaces stock pressure plate, diaphragm
16-0310 Puller Tool
spring and spring retainer. Great for seriously tuned engines 20-2051 Chrome Pressure Plate
or wide tire conversions. *Note: Applies extra pressure to Replacement Friction/Steel Sets
the clutch plates and prevents clutch slippage without any VT No. Fits
increase on the lever pull effort by changing the fulcrum 18-0542 Special application for chain or belt drive
point. Fits 1998-17 FXST, FLST and 1998-16 FLT. 18-0544 20-0549, 1984-89 Chain
VT No. 18-0002 18-0545 20-0550, 1990-97 Chain
Barnett Scorpion Clutch Kit features York Posilock Clutch Kit fits
over twice as much friction surface 1998-2006 Big Twin featuring posi-
area compared to stock clutch. All tive engaging ball ramp activation.
Scorpion Clutches provide a positive VT No. 18-0780
engagement and release. Scorpion
clutches incorporate 6 heavy duty coil
springs. In addition, an extra spring set
with a different spring rate is included
which allows the clutch to be tuned for street or race application
Chrome Billet Clutch Pressure
depending on usage. Tunability is easy without removal of the
Plate fits BDL 4 Bolt Style.
primary cover. Barnett Friction Plates are compatible with any
VT No. 20-2051
primary oil. Each kit is designed to be used with stock type
clutch basket.
VT No. Year
18-3833 1986-89 Big Twin
18-3853 2007-09 FXST, FLST, FLT; 2006-09 FXD
BDL Competitor Clutch Kit features
9 springs and shoulder bolts for simple
adjustment, large 40mm double row
hub bearing, polished pressure plate
and Kevlar clutch.
VT No. Fits
20-0628 1990-97 Evolution Big Twin with Chain Primary Drive
Replacement Friction/Steel Sets for Above
VT No. Fits
18-0548 20-0628
203
Big Twin • Series KTM clutches perform flawlessly under
Clutch Kit
extreme heat conditions
• Smooth precise shifting
• Steel backing plates for maximum strength
• Kevlar is the most durable friction material made.
18-3270 18-3271 • 100% asbestos free
Kevlar
18-3230 18-3250
18-3691
Carbon Fiber Clutch Kits by Barnett for wet clutch applica-

tions. Carbon fiber clutches feature excellent lubricity and very
good energy absorption. Include steel sets.
VT No. Year/Fits Note VT No. Item Note
18-3693 1984-89 All Big Twins 1 Fits 1984-89
18-3272 1990-97 All Big Twins 18-1147 Friction Plate (6) 1
18-1148 Steel Set (7)
18-3691 1990-97 All Big Twins 2 Fits 1990-97
18-3270 1990-97 FXST, FLST, FXD, 1998-16 FLT 18-3230 Friction Plate (8) 2 18-3695
18-3271 1998-17 FXST, FLST, FXD, 1998-16 FLT 2 18-3231 Steel Set (6)
Note 1: Plates are wider than stock. Adds 25% more surface area. 18-3233 Extra Plate Friction Set 3
Note 2: Consists of nine friction plates and eight steel plates. Adds 12% more sur- Fits 1998-17
face area double steel drive plate is not used. 18-3250 Friction Plate (9)
18-3251 Steel Set (8)
18-3695 Extra Plate 4 18-3233
Fits 2017-up FLT
18-3272 Extra Plate Friction 4
and Steel Set
Notes
1. Plates are 25% wider than stock for a greater surface area contact.
18-3690 18-3231 2. Stock double riveted Drive Plate must be reused.
3. Consist of 9 Friction Plates and 8 Steel Plates. Add 12% more surface area to
clutch double steel Drive Plate not used with kit.
Barnett Carbon Fiber Clutch Plate Sets for wet clutch appli- 4. Consists of 10 friction plates and nine steel plates. Adds 11% more surface area.
cations. Order steel sets separately. 18-0226 18-0227
Fits 1990-97
VT No. Item
18-3690 Friction Plate Set
18-3231 Steel Plate Set Alto Carbonite Power Pack Clutch Kits for Big Twin include
Fits 1998-17 FXST, FLST, FXD friction and steel plates. Friction plates feature 3M carbon based
18-3694 Friction Plate Set friction material to withstand high friction and heat temperatures.
18-3251 Steel Plate Set Steel plates are melonite treated for better
engagement and cooler running. Order spring
plate separately.
VT No. Year
18-0226 1984-89
18-3213 18-8306 18-3252 18-0227 1990-97 18-0228
18-0228 1998-17
Alto™ Clutch Set

18-0166 18-8316
18-3255
Barnett Diaphragm Clutch Spring.
VT No. Year Type Item
18-3213 1984-89 Big Twin Stock Spring
18-8306 1990-97 Big Twin, 25% stronger Heavy Spring Alto Clutch Sets. Available in fibers and steel. Sold Kevlar or
18-3252 1998-05 FXD, FLT Stock Spring
Red Eagle type. Both are bonded to steel.
1998-06 FXST, FLST
18-3696 As Above, 25% stronger Heavy Spring Alto Clutch Sets For Big Twin Models
18-0166 As Above Stock Kit 18-8281 1984-89 Red Eagle
18-3255 1984-89 Adjuster Plate 18-8292 1984-89 Kevlar
Round Dog Clutch Plate Set includes 18-8290 1984-89 Diaphragm Clutch Spring
steel and friction plates to fit BDL 18-8276 1990-97 Red Eagle
units. 18-8299 1991-97 Kevlar
VT No. 18-0701 18-8315 1998-17 Red Eagle
18-8316 1998-17 Kevlar
18-8317 1998-17 Diaphragm Spring
Steel Plates For Big Twin
18-8289 1984-90 Set
18-8286 1990-97 Set
18-8318 1998-17 Set
204
18-3669 Police Clutch Kit
BIG TWIN
18-1740
18-0154
18-0158
18-3686
48-1781
18-5053 18-8333
York Patch.
VT No. 48-1781
Clutch Pack-Kit. Heavy duty factory “wet” type for Big Twins.
Complete kit includes our original bonded police Kevlar clutch
steel plates with diaphragm spring. 18-8335
VT No. Year
18-3669 1985-89
18-3686 1990-97
18-5053 1998-17
Diaphragm Springs
18-3234 18-3267 18-0533 18-0539 18-0670

18-8337
Sifton Springs.
VT No. Big Twin Type
18-3234 1990-97 Stock
18-3267 1990-97 Heavy
18-0533 2006-17 Stock
18-0539 2006-17 FXD Blue
18-0670 2006-17 FLT Yellow
Friction and Steel Plate Sets.
VT No. Fits Type
18-1740 1990-97 All Big Twins Coprene Kit w/steel plates
18-0154 1990-97 All Big Twins Coprene Friction Set
18-0158 1985-89 All Big Twins Coprene Friction Set
18-8333 1998-17 FXST, FLST, FXD Coprene Friction Set
1998-16 FLT
18-8335 1998-17 FXST, FLST, FXD Red Devil Friction Set
1998-16 FLT
18-8337 1998-17 FXST, FLST, FXD Steel Plate Set
1998-16 FLT
205
Clutch Release
5 & 6-Speed
17-9252
E 18-3268
C
F
17-1545
A
B
5-Speed Clutch Push Rod Kits are three piece. Replaces OE

D parts for all 5-speed transmissions.
18-3212
VT No. OEM OEM Model
Clutch Release Kit for cable direct operated clutch on 5-speed 17-9243 37089-79 37090-79 1980-E84 FLT-FLHT
models. Fits 1987-up. 37088-79 1982-83 FXR
VT No. # OEM Item 17-9244 37089-84 37090-84 Late 84 FLT Classic
18-3212 All Kit 1987-99 Complete 37088-84 Late 84 FXRS-FXRT
18-3268 All Kit 2000-up Complete Late 84 FXRP-FLHTP
12-0158 A 8873 1987-99 Ball 17-9245 37089-84 37090-84 Late 84 FXST 1985-86 FX
12-0951 B 10998 1987-up Retainer Ring 37285-84
C 25452-87 1987-99 Inner Ramp 17-9246 37089-84 37090-84 1985-86 FLHT-FLT
18-3210 D 25453-87 1987-99 Outer Ramp 37088-85 1985-86 FXRS-FXRT
18-3211 E 34920-86 1987-99 Coupling 1985-86 FXRP-FLHTP
15-0240 F 36801-87 1987-06 Gasket 1986 FXST
15-1504 F 36801-87 1987-06 Gasket with bead 17-9248 37089-84 37090-84 1987-89 FLT-FXR-FXST
37088-87
18-3653 17-9249 37089-84 37090-84 1990 FLT-FXR-FXST
B 37088-90
17-9250 37069-90 37088-90 1991-97 FLT-FXR-
37090-84A FXST-FXD
17-9252 37069-90 37088-90 1998-06 FLT-FXST-FXD
43-0131 37090-98
17-1545 — — 2007-17 6 Speed
18-3661 A
Thrust Washer Bearing Kit
includes oversize washer and
related parts.
VT No. 18-0261
5-Speed Clutch Release Lever Set fits 5-Speed models
1982-86. It replaces the stock release arm. Cable bracket, Oil Slinger includes rod end. Replaces
mounting hardware and acorn nut included. Replaces 37085- 37069-90. For 1990-06 Big Twin.
80, 37096-83 and 37096-85. VT No. 17-9255
VT No. # OEM Item
43-0131 Chrome Cover Only
18-3661 A 37084-79 Release Finger 1987-99 Big Twin Clutch Release
18-3653 B –– Release Lever Kit Kit includes end rod with slinger,
12-1159 11019 Shaft Snap Ring bearing, washers and snap ring.
17-9980 37083-80A Finger Shaft VT No. 18-0260
Clutch Pushrod Snap Ring for 1975-up Big

Twin, replaces 11096 in stock or full external
configuration. Big Twin Clutch Adjusting Screws sold each.
VT No. Type VT No. Years
12-0923 “C” Type, Stock 18-3259 1985-90
12-9992 Full External Type 18-3253 1991-97
206
22-0378
E-Z
Clutch Control
BIG TWIN
Soft Pull Clutch Ramp Kit
26-0590 includes spring plate for 1998-
up Big Twins.
VT No. 18-0559
Chrome Smooth Contour Control Kit features a hidden
underside mounting on the switch housings for an unobstructed
smooth, rounded surface on the top housing. Switch housings
use stock or chrome rounded switches (introduced on 1996
models). Complete kits include clutch and brake levers, master
cylinder, hydraulic clutch, switch housings, brackets and hard- 18-3232
ware. Master cylinder is ¹¹⁄₁₆” bore, hydraulic dual disc. Clutch
handle is ¹¹⁄₁₆” bore.
VT No. Style
22-0378 Contour
18-3269
26-0590 Lever Set
Hydraulic Clutch Handle Kit. Fits E-Z Pull Clutch
1987-2006 Assist reduces man-
VT No. 26-0996 ual effort required to
pull the clutch lever
by 40%. Mechanism
fits inside transmis-
sion side cover and
extends clutch oper-
18-0675 Installed
ating mechanism for
improved leverage.
VT No. Year
18-3232 1987-99 FXST, FLST, FLT
1991-99 FXD
18-3269 2000-13 FLT, 2000-17 FXST, FLST, FXD
18-0675 18-0672
18-0571
18-0570, 18-0574
18-0570
Chrome Hydraulic Clutch Actuator Cover for use on 1987-

18 models. Both types include hardware, banjo bolt and
bleeder screw. Both require an 11/16" master cylinder (VT No.
18-0672), hydraulic line not included and clutch rod to be pur-
chased separately for installation of cover.
VT No. Fits
18-0675 1987-06 FXST, FLST, FLT, 1987-05 FXD
18-0676 2007-17 FXST, FLST, FLT, 2006-17 FXD
18-0672 11/16" Master Cylinder, Chrome
18-0572 1987-06 Clutch Rod (15 1/2” Long)
18-0570 2003-17 Clutch Rod (15 1/4” Long)
18-0571 Fitting to Replace Banjo
23-1715 Rebuild Kit for 18-0672
207
Rear Sprocket 9.8mm
Offset
19-0672 19-0673
19-0130 19-0133
Chrome 5-Spoke
Sprockets. Offset models
Chrome Lazer Design Rear Sprockets with 9.8mm offset for have 9.8mm offset.
1973-84 FX-FL or flat. Offset Flat Teeth
Offset Flat Teeth 1973-99
19-0130 19-0133 49 19-0672 19-0674 48
19-0134 51 19-0673 19-0675 51
Sprocket 12 Point Bolt and Wash- 2000-up
er Kit. 19-0218 19-0251 48
VT No. 2277-10 19-0250 19-0221 51
Transmission Sprockets
B 19-0122 *Note: To use on 1994-up
models, Drive Sprocket
Spacer & Seal must be
changed to Pre-94 type.
Seal: Replaces 12050
VT No. 14-0157 Spacer:
Replaces 33334-84
VT No. 17-9851
19-0224 .900 Offset 19-0213 Offset Sprocket Kit with .500” offset for FXST and FXR.
Allows installation of 150 series tire by converting from belt to
chain drive on 1986-99 FXST and 1985-94 FXR models. The
stock final drive ratio is 2.1875 with belt drive and then new
A drive ratio will be 2.125 when used with 24 tooth front sprocket
and 51 tooth rear sprocket and 2.00 when used with a 48 tooth
Offset Transmission Sprockets fit 1994-2003 Big Twin for
rear sprocket. *Note: Includes rear sprocket spacer.
chain drive conversion.
VT No. Item Teeth
.900 offset is the maximum offset without any modification to the
19-0164* Drive Sprocket 22T
stock inner primary, to allow the installation of a 180 tire, without
transmission offset. Fender modification may be required.
A .250” .500” .750 .810” .900” Teeth
19-0128 Rear Sprocket Spacer 3/16”
— 19-0400 — — — 21
19-0021 Rear Sprocket FXR 48T
— 19-0401 — 19-0214 — 22
19-0022 Rear Sprocket FXR 51T
— 19-0488 19-0784 19-0215 19-0223 23
19-0037 Rear Sprocket FXST 48T
19-0213 19-0489 — 19-0216 19-0224 24
19-0041 Rear Sprocket FXST 51T
B .715” .940” 1.236” 1.350”
Standard Offset for FXD's. 19-0605
VT No. Tooth
19-0612 22
19-0614 21
19-0611 23
19-0613 24
19-0433 Rear Chain Tensioner by LBV 6-Speed Transmission Sprocket
reduces chain vibration and fre- VT No. Tooth Offset
quency of adjustment by utilizing 19-0605 26T Standard
a durable urethane roller which 19-0606 25T Standard
revolves on sealed bearings mount- 19-0607 24T Standard
ed on stainless anchor plates. 19-0608 26T 1/2"
VT No. Year Model 19-0609 25T 1/2"
19-0433 1984-85 FXST 19-0610 24T 1/2"
19-0436 Roller only All
208
Chrome Chain & Belt Sprocket Bolt Kit
BIG TWIN
C G I J
A
M P Q
B
L
D
Wheel Type Drive Type # Style Includes
I, M, O
Year Cast Spoke Belt Chain Nuts/
Washer E
FLH-FX-FXST-FLST
1985-92 8843-10 • A Acorn • R J, L, N
1973-98 8834-10 • F Allen • F
1973-98 8835-10 • I Allen •
1973-98 9608-10 9609-15 • • J Dome • • 2054-10T
1993-96 2053-10 • L Dome • 37-0031
1985-92 8844-10 • D Cap •
1985-92 8842-10 • E Allen •
1973-up 9857-10 P Collar •
1985-96 9858-15 • P Collar •
1985-96 37-8671 • • Q Torx •
1985-96 37-9256 37-9254 • R 12pt •
1997-99 2053-10 2053-10 • L Dome • 37-0990
1997-99 2054-10 2054-10 • M Allen • 2000-up Pulley Bolt Kits.
1997-99 2054-10T 2054-10T • M Allen • VT No. Type Thread
2000-06 2052-10 2052-10 • O Allen • 37-0990 Allen
FXR-FXD-FXDWG 37-0031 Hex
1985-96 9857-10 9858-15 • P Collar •
1997-98 2054-10 • M Allen • 37-9236 ³⁄₈” x 16 x 1
1997-98 2053-10 • L Dome •
1999 2053-10 2053-10 • L Dome • Thickness
2000-up 2051-10 2051-10 • N Dome •
2000-06 2052-10 2052-10 • O Allen •
2006-06 2340-10 2340-10 • O Allen • I.D
2000-up
FLT
1997-98 2053-10 • L Dome •
1999-up 2053-10 2053-10 • L Dome •
1997-98 2054-10 M Allen
Rear Pulley Rotor Spacer has 2¹⁄₄" is ideal to get belt pulleys
or chain sprockets in line. These spacers can also be used
Pulley Spacers provide offset when as a disc spacer. Spacer can be machined down to the next
required, with ⁷⁄₁₆” bolt holes. Each disc size under without having to worry about the spigot alignment,
measures 2¹⁄₁₆” Inner Diameter with 4⁵⁄₁₆” when you machine the face of the spacer down to the desired
Outside Diameter for 1980-99. thickness on spacers with spigot. Spacers are drilled for use
VT No. Thick Material *Note: Use with ⁷⁄₁₆" bolts and designed to be used with 2000-up type
23-0320* ¹⁄₁₆” Steel when install- wheel hubs. I.D. is 2.25”.
19-0128 ³⁄₁₆” Steel ing flat rotor
on 1973-75 Steel Aluminum Thickness
19-0452 ³⁄₁₆” Billet
1980-99 19-0413 ¹⁄₄” Steel
19-2001 ⁵⁄₈” Billet
Big Twin.
20-0346
Alloy
¹⁄₁₆”
20-0347 20-0150 ¹⁄₈” (.125”)
20-0343 20-0149 .200”
20-0344 20-0136 ¹⁄₄”,(.250”)
20-0345 .300”
20-0151 ⁵⁄₁₆”,(.3125”)
20-0343 20-0147 20-0145 20-0148 20-0153 ¹⁄₂” ,(.500”)
20-0143 ³⁄₄” ,(.750”)
20-0144 ⁷⁄₈”,(.875”)
20-3088 1”
20-0145 1”
20-3090 1.370”
20-0146 1¹⁄₄”,(1.25”)
20-0146 20-0148 20-0144
20-0147 1¹⁄₂”,(1.5”)
209
Primary Chain
19-0878 19-0876
19-0360
Diamond Endless Primary Chains
VT No. Size Year Model
19-0361 428x2-76 1979-06 FLT-FXR
19-0368 428x2-74 1994-06 FLT
19-0933 19-0836 19-0360 428x2-82 1986-06 Softail
Primary Chain. Made from select steel alloys that are light 1991-05 FXD
yet provide maximum strength. These primary chain has shot- 19-0786 428x2-92 2007-up Softail
peened, heavy-duty side plates and solid roller construction. 19-0583 428x2-86 2007-up FLT
TYK Diamond Fits Links
19-0878 — 1980-06 FLT 76 19-0678
19-0876 — 1980-06 FXWG and FXST 82
19-0933 — 1980-06 FXWG and FXST 84
19-0835 19-0786 2007-up FXST 92
19-0836 19-0583 2007-up FLT 86
19-0837 — 1994-06 FLT 74
19-0677
19-0681
York Rear Chain and Sprocket Kit includes nickel plated 120
link chain, offset 23 tooth transmission sprocket, rear 51 tooth
sprocket, spacer and front sprocket.
VT No. Fits
19-0677 1995-99 FXD
19-0681 2000-05 FX-FXDWG
19-0678 2006-17 FXD-FXDWG
Motor Sprockets
1984-up Big Twin Compensator Engine Sprockets Big Twin Offset Motor Sprockets.
VT No. Teeth Year Type 24T 25T Offset
19-0394 24 1985-93 FXR-FLT 19-0104 ³⁄₄”
1991-93 FXST 19-0105 19-0161 1”
19-0403 24 1984-90 FXST 19-0106 19-0162 1¹⁄₄”
19-0416 25 1994-01 All Big Twin 17-0945 17-0945 Nut Kit
19-0007 21 2002-06 All Big Twin 19-0107 19-0161
19-0585* 27 1994-06 All Big Twin
*Note: Requires longer primary chain. FLT applications 1955-up Big Twin Sprocket Nut and Lock
will require VT No. 19-0935, 77 link chain, and FXST, Tab Set allows locking of nut by utilizing 2 tabs
FXD applications will require VT No. 19-0937, 83 link which fit into sprocket holes when non-compen-
17-0945
chain. sator sprocket is used.
VT No. Item
Engine Sprockets
Spline Taper Tapered Tapered Teeth 17-0945 Kit
1955-up 1930-54 Kits, 1936-54 Kits,1941-54 12-0504 12-0504 Nut Only
19-0145 19
Compensator Sprocket Motor Nuts.
Spline 19-0146 20
VT No. Year
19-0147 21
12-0506 1970-90
19-0050 19-0054 19-0148 19-0138 22
12-0506 12-0578 1991-06
19-0051 19-0055 19-0149 19-0137 23
12-1102 2007-17
19-0141 23
12-1946 1970-90 (Chrome)
19-0142 23
19-0052 19-0056 19-0150 19-0139 24
Taper 19-0053 19-0140 25
12-0200 Key
17-0945 12-0503 Nut
210
Chain Tensioner
Primary Chain
BIG TWIN
18-8314
28-0568
18-0581 Installed
18-0581
28-0225
18-8314
18-0582 18-3705
18-8320
Chain Tensioner Parts fits Big Twin models.
VT No. # OEM Type Years
18-8314 All Complete Kit 1984-2000
18-3217 B-C-F-G Hardware Kit
37-9030 A 1783 Screw, 10 pack
37-8801 B 3862B Bolt, 5 pack
York Chain Adjuster Kits feature automatic self adjusting by 18-3682* C 4401W Hex Bolt, each
use of spring loaded shoe. 28-0225 E 39976-65B Nylon Pad 1965-2000
VT No. Year 28-0568 Red Nylon Pad 1965-2000
18-0580 1965-00 28-0234 E 39976-01 Nylon Pad 2001-2005
18-0581 2001-06 17-0915 G 39996-65 Lock, 10 pack
18-0582 2007-17 FXST, FXD 18-3218 H 39990-65 Shoe Mount Bracket 1965-2000
2007-16 FLT, FL, 2007-up FLST 18-3219 F 39993-65 Plate
18-3705 2016-17 M-8 18-3622 I 39992-65A Nut and
J 39998-65 Anchor Plate
18-3634 J — Anchor Plate with carriage bolt (K)
37-8802 K 5444 Carriage Bolt, 5 pack
18-3223 I 39992-65A Nut Only
*Note: Early style Hex Bolt, screws into 18-3223 Nut.
York Big Twin Hydraulic Primary Chain TensionatorTM fea-

tures a hydraulic valve which controls the motion of the sub-
merged piston which constantly keeps the chain in tension for
1965-84 FL, 1971-84 FX, 1984-06 FXST, FLST, 1984-2005
FLT, 1984-94 FXR, 1991-05 FXD.
VT No. Item
18-0120 Chain Tensioner
18-0128 Chain Tensioner Shoe
Manual Primary Chain Adjuster Kit for
all 2006-up FXD, FLT and 2007-up FXST, 18-0702 Automatic Spring Loaded Chain
FLST with stock type spring loaded primary Tensioner.
adjuster assembly allows precise adjust- VT No. Year
18-8328
ment of primary chain and creates less 18-0700 1985-05 Big Twin
drag and loss of power like stock spring 18-0700 18-0702 2006-up FXD,
loaded assembly. VT No. 18-8328 2007-up FXST
211
Sprocket Parts
19-0300 19-0584
Compensator Sprocket Parts.

19-0301 VT No. # OEM Item Year Model
19-0394 B 40269-85A Sprocket 1985-93 FXR-FLT
1991-93 FXST-Dynaglide
19-0403 B 40275-83 Sprocket 1984-90 FXST
19-0416 B 40308-94 Sprocket 1994-01 Big Twin
19-0007 B 40327-02 Sprocket 2000-06 Big Twin
19-0395 C 40299-83A Slide cam 1984-06
19-0396 A 40266-85 Extension 1986-06
19-0102
19-0378 D 40384-83A Retainer 1984-90
with cover
19-0405 D 40384-91 As Above 1991-06
12-0506 E 40392-70 Nut 1970-90
12-0578 E 40392-91 Nut 1991-06
12-0630 3594 Plate 2007-17 except FLT 2007-up
12-0998 37810-08B Retainer 2008-17
19-0584
M-8 Solid Compensator Kit 34 Tooth reduces noise and

improves engine starting along with starter life. Also aids in bet-
ter throttle response and smoother shifting due to the reduction
in weight. For use with 2017-up M-8 models.
VT No. 19-0027
10-0428 Order Spacer and Shims separately for 1970-
up.
VT No. OEM Size Item
10-0427 24002-70 Spacer
Compensator Sprocket Kit includes all parts pictured with 24T 10-0428 24032-70 .060” Shim Set of 6
sprocket. 24033-70 .090” Shim
VT No. Fits 24034-70 .120” Shim
19-0300 1984-90 FXST 24035-70 .150” Shim
19-0301 1991-93 FXST 24036-70 .180” Shim
19-0102 1994-05 FXST Note: 25T 24037-70 .210” Shim
19-0584 2006-11 FXST-FLST-FXD, 2007-10 FLT Compensator Sprocket Spring Pack
19-0935 77 Link Chain Kit includes 2 large, 3 medium and
19-0937 83 Link Chain 1 small spring wafer. Fits 2006-2013
FXD, 2011-2013 FLT, 2007-2016 FLST,
2007-2016 FXST, 2009-2013 FLHXXX.
VT No. 13-0871
212
19-0167
Motor Sprocket
BIG TWIN
19-0299
19-0175
19-0586 19-0587
19-0923 Compensator Sprocket Kit. Engineered with heavier springs
and increased travel. Heavy Duty Kit is should be used for
higher than stock horse power engines.
VT No. Item Fits
19-0299 Heavy Duty 2012-13 FXD, FXST
2011-13 FLT
2009-13 FLHXXX
19-0587* W/34T Sprocket Same as Above
*Note: Does not include spring pack. Requires separate pur-
chase of VT No. 13-0871 spring pack.
Compensator Sprocket Eliminator Kit fits 2007-16 FLT and
2007-17 FXST, FLST and FXD models. Solid steel one piece
design sprocket kit is spring less and much quieter than stock
style compensator. Eliminates the need for a complete compen-
sator assembly. Kit includes washer, spacer, bolt and sprocket.
VT No. Type
19-0167 Kit with 34T Sprocket Only
19-0175 34 Tooth Sprocket Only 19-0487
19-0586* 30 Tooth Sprocket Only
19-0923** Kit with 30T Sprocket and Link Chain
12-1102 Bolt Set
19-0935 77 Link Chain
19-0937 83 Link Chain
*Note: Requires shorter primary chain. FLT applications require
VT No. 19-0933 primary chain and FXST, FLST, FXD applica- 19-0475
tions require VT No. 19-0380 primary chain.
**Note: Includes VT No. 19-0933 84 link primary chain for FLT
applications only.
Compensator Bolt Torx socket
is for 2014-up Big Twins. Used to
remove or install compensator bolt. Compensator Sprocket Lock Nut Kit includes a lock plate
VT No. 16-1669 and lock tabs which secure the nut to the sprocket retainers
that the compensator nut and lock plate bolts do not come
loose. Similar to the transmission pulley mega nut. Use on all
Big Twins with VT No. 19-3299 or VT No. 19-0587 compensa-
tor sprocket kit only.
York Jims
19-0487 19-0475 213
Primary Drive Assembly
18-0102 1998-2006 18-0104 1991-93
18-0103
18-0114
18-0104 18-0111
Primary Chain Drive Systems for Big Twins include 76 or 82 link Diamond primary chain, chain shoe adjuster assembly, clutch
drum basket with starter ring gear and steel and fiber clutch plates with pressure plate assembly. Correct front compensator
sprocket assembly includes all parts necessary for installation. Including sprocket nut. 5-Speed Big Twin Softail models and all
pre1985 FLH-FX 4-Speeds require 82 link primary chains, 1980-up FLT-FXR 5-Speeds require 76 link primary chains.
82 Links 76 Links Year
18-0102* 18-0114* 1998-06
18-0103* 18-0113* 1994-97
18-0104* 18-0112* 1991-93
18-0105* 18-0111* 1985-90
*Note: Units include compensator front sprocket assembly.
214
BDL Belt
Drives
BIG TWIN
14mm x 3³⁄₈ Wide Drives
8mm x 42mm
BDL Belt Drive
Kits
BDL 8mm x 42mm Electric Start Belt Drives. Includes a 20-0632

polished pressure plate, Kevlar clutch, sealed inner primary
bearing and features a shorter length clutch hub that elimi- BDL TF-1000 and TF-2000 “Top Fuel” Street Belt Drives
nates unnecessary weight past the end of the mainshaft and for 1991-up FXST. Features 14mm by 3³⁄₈” wide belt, Kevlar
can be installed without any modifications to inner primary. Nine (9) Plate Clutch with eleven (11) steels, special pressure
VT No. Fits Belt Front plate that uses nine (9) springs for varying spring pressure.
Pulley Drive includes pulleys, belt, clutch pack, starter jack shaft,
20-0605 1986-89 All FXST 20-0630 20-0902 inner motor plate with oil filter mount pulley domes and side
20-0629 1990-06 All FXST 20-0630 20-0902 guard. Polished finish. The TF-2000 features out board bear-
18-0554 Replacement Clutch Pack for Above Units ing support and polished finish.
BDL Front Belt Drive Parts VT No. # Replacement Belt
B VT No. # Item 20-0632 TF-1000 20-0127
A 20-0925 A Inside Belt Guard 20-0755
C 20-0005
20-0926 B Outside Belt Guard
20-0927 C Motor Nut 55-up w/washer
Chrome Belt Drive Cover Set as shown,

VT No. Style
20-0005 Smooth
20-0603 20-0755 Flame
20-0600
20-0601 20-0900 20-0900 20-0935

BDL 3” Electric Start Belt Drives with billet motor plate. BDL 3” Wide Offset Front Primary Drive Pulley. Use with
Includes 8mm belt, polished motor plate, double row sealed correct insert and nut for offset desired.
mainshaft support bearing, polished side guard, polished VT No. Item
dome pulley covers and Kevlar clutch. *Note: Can only be 20-0900 Pulley Only, 47T
used with 1991-up starter motor and some modifications will 20-0935 ¹⁄₄” Insert and Nut
be necessary to install these kits. 20-0937 ³⁄₄” Insert and Nut
VT No. Year Belt Front 20-0938 1” Insert and Nut
Pulley 20-0940 1¹⁄₂” Insert and Nut
20-0600* 1985-89 20-0603 20-0900 20-0941 1³⁄₄” Insert and Nut
20-0601 1990-06 20-0603 20-0900 BDL Ball Bearing Lock-Up Clutch.
Chrome Out Board Support This ball bearing ramp style clutch set
Kit fits 3” BDL and York Unit. reduces clutch slip for a more positive
Includes hardware. For 3" clutch engagement. Available for all BDL
drive units. belt drives with coil spring clutch except
VT No. 20-2052 top fuel drives. All Primo belt drive and
pro-clutches with diaphragm spring and all
Big Twins 1998-07 with stock clutch pack.
20-0930 Fits Primo Drives
VT No. 20-0037
A Auto Slip Clutch Kit fits all BDL belt and
BDL Belt Drive Parts York 3” drive units.
20-0928 A Round Dogs 5-Speed VT No. 20-2023
20-0929 A Round Dogs 4-Speed
Sealed Inner Primary Bearing fits York and BDL
20-0930 B Splined Hub 1990-up 3” only
models.
VT No. 12-0993
Note: There is no warranty on belts when sold as part of kit or
individual replacements. 215
Brute
20-0680 20-0682
Belt Guard Mounts to Brute IV and V units.
VT No. Style Width
20-0680 Flame 3.5”
20-0682 Smooth 3.5”
20-0683 Flame 3”
Outside Belt Guide Plate is for all Primo 8,
11, and 14 front pulleys except taper shaft.
VT No. 20-0230
20-0962
20-0012
20-0331
20-0331 Installed
Polished Alternator Cover for Big Twins. Use on all Cone
motors. Designed to protect your alternator, also helps cooling
by acting as a heat sink. Has a mounting lug for belt shroud
built in. VT No. 20-0330
Brute III from Primo Products includes dry clutch pack pulley
assembly which retains diaphragm spring function, while increas- Chrome Big Twin Alternator Rotor Cover
ing the clutch friction surface area 70% for smooth light fingered presses over 1981-up rotors for tight fit.
action. Kit includes pulleys, 1³⁄₄” Kevlar reinforced rubber belt, VT No. 20-0216
complete clutch pack/pressure plate assembly and necessary
hardware, bolt in kit. Available in 8 mm or 11 mm drive kits. Chrome Alternator Rotor Cover fits major brand
8 mm Drive Kits belt drive and open primary set ups. Installs to com-
Kit Repl. Fits pletely cover the steel alternator rotor.
Belt VT No. 20-0238
20-0016 20-0554 1986-89 FXR-FLT
1990-up Primo Belt Drive Clutch Hub Nut
20-0017 20-0554 1990-93 FXR, FLT
and Adjuster Kit will prevent oil leakage
20-0015 20-0554 1994-06 FXR-FLT
through the mainshaft when using a belt drive
11 mm Drive Kits
20-0012 20-0553 1994-99 FXST, 1994-99 FXD 18-0201 system. Kit includes clutch hub nut, seal and
adjuster screw with nut. Note: For Belt drive
18-0555 18-0556 primary system only.
VT No. 18-0201 Splined (O-Ring Type)
Chrome Alternator Cover

Set includes polished outer
housing and chrome rotor
Replacement Clutch Set for all Brute III belt drives. Includes cover.
6 fiber plate and 7 steel plates. VT No. 20-0337
VT No. Fits
18-0555 Early Style with Flange 27-1729 Frame Mount Kickstand Stop
18-0556 Late Style without Flange for use on all open belt drive
Big Twin by clamping to frame
20-0948 tube. Fits 1³⁄₈” and must be cut to
desired length.
20-0962 VT No. 27-1729
Primo Offset Front Pulley Inserts for 2.5” diameter Brute III Acorn Motor Nuts for Big Twins with
and 3.0” inserts for Brute IV Pulleys. Special nuts and flanges splined sprocket shaft.
(outside guide plates) are required. VT No. 7816-1
Insert for Insert for Special
Brute III Brute IV Motor Chrome Pike Motor Nut fits Big Twin
Offset Pulley Pulley Nut 1955-up sprocket shaft.
1¹⁄₂” 20-0947 VT No. 37-0890
1³⁄₄” 20-0948 20-0955 20-0962 5 and 6 Speed Bearing Support
2” 20-0949 Plate for 1984-2000 Big Twins with
kick start. Billet aluminum support
plate includes bearing.
Note: There is no warranty on belts sold when as part of kit or individual replacements. VT No. 20-0250
216
Rear Pulley
BIG TWIN
20-0597 20-0353 20-0671
20-0313
20-0674
20-0675 20-0452 20-0498 20-0352
Big Twin Rear Drive Pulley fit Big Twin models, 1986-99.
1.5 Wide
VT No. Teeth Finish
20-0597 61 Natural
20-0313 65 Chrome
20-0353 65 Chrome
20-0671 65 Chrome
20-0675 70 Chrome 20-0678 20-0647
20-0452 70 Silver Big Twin Rear Drive Pulley for 2000-17 FXD models.
20-0498 70 Chrome VT No. Year Width Finish
20-0352 70 Chrome 20-0678 00-05 1.125 Chrome
20-0674 70 Chrome 20-0647 06-up 1.125 Chrome
20-0689 20-0692 20-0697
20-0737 20-0354
5 Spoke Billet Chrome Rear Pulley fits 2000-05 FXST with
1.125” width belt.
VT No. Tooth Chrome Pulley fits FXST, with 20mm wide belt.
20-0689 68 20-0692 2006-06 70T
20-0737 68
20-0697 2007-17 66T
20-0354 70
65 T Chrome Billet Rear Pulley Pulley Adapter Ring will adapt the 2000-up 1.125”
features spoke design. Pulleys wide types to 1999 and earlier wheel hubs, which
with 2¹⁄₄” inner diameter fit hubs will allow use of a 170 mm wide tire on 1999 and
with 1” bearings on 2000-05 earlier applications.
FXST models. 1.125” wide. VT No. 20-0342
VT No. 20-0691
217
Pulley Cover
42-0667 42-0660 42-0765 42-1014
42-0860 20-0967 42-0669
42-0783
20-2026
42-0682 42-1003
42-1046
42-1013
FXD, 70 Tooth Cover
42-1003 2006 FXD
42-1013 2007-17 FXD
20-2026 2007-17 FXD, Black
42-1046 2007-17 FXD-FXDWG
20-0967
Chrome Inner Pulley Insert fits inside 70T rear
pulley. VT No. 42-0535
Outer Pulley Cover.
VT No. Tooth Fits/Type
FXST-FLST
42-0667 70 1984-93 FXST-FLST, Smooth, Chrome Inner and Outer Pulley
1991-99 Dynaglide Covers allow both sides of 70 tooth
42-0660 70 As Above pulleys on 1980-99 Big Twin to be
42-0765 65 1995-99 FXST-FLST covered with inserts to match to
42-1014 66 2007-17 FXST stock hole pattern for the look of a
42-0860 70 2000-06 FXST-FLST completely chrome pulley.
20-0967 2007-17 FXST, Black 42-0660 VT No. Type
20-0751* 2007-17 FLT *Note: Glossy Black 42-0660 Outer Cover
42-0669 61 1990-99 FXST 11” OD, 42-0752 Inner Cover
.984 Deep
42-0783 70 2000-17 FXSTD
42-0682 70 2000-05 Dynaglide
218
Front Pulleys
20-0447
BIG TWIN
20-0702
20-0696 20-0729 20-0733
20-0706 20-0728
Final Drive Front Pulleys available for Big Twin models as supplied by V-Twin, Andrews or BDL. All
BDL pulleys are ¹⁄₃” lighter than stock and include nut, lock plate and screws. *Note: All other numbers
will require separate purchase of a nut and lock except 20-0447.
# of 84-93 BT 84-93 BT 84-06 BT 94-06 BT 94-06 BT 07-up 07-up Description
Teeth V-Twin Andrews BDL Andrews V-Twin V-Twin Andrews
5-speed 5-speed 5-speed 5-speed 5-speed 6-speed 6-speed 20-0734
29 — 20-0700 20-0703 20-0709 — — — Better Acceleration
30 20-0734 20-0701 20-0704 — — — 20-0728 Good Acceleration
31 — — 20-0705 — 20-0733 — — Good Acceleration
32 20-0447* — 20-0661 — 20-0706 20-0696 — Stock Replacement
33 — — 20-0707 — — — — Overdrive
34 20-0380 20-0702 20-0708 20-0711 — — 20-0729 Smooth Cruising
35 20-0735 — — — — — — Smooth Cruising 20-0380
20-0308 20-0338 20-0389
20-0722
17-0959
Front Pulley Lock Plate Kit.

17-0960 VT No. Year
20-0338 1994-06
12-0268 20-0389 1984-93
Big Twin Drive Pulley Kits include
pulley which accepts 1.125” or 1.5”
wide belts, indexing nut seal and seal Front Belt Lock Plate and Nut Kit
spacer as required. Fit 5-Speed, 32 includes 2 allen screws, sprocket lock nut
tooth. and lock plate.
VT No. Year VT No. Item Year
20-0721 1984-93 20-0308 Kit 1993-06
20-0722 1994-06 17-0960 Kit 2007-up
Pulley Indexing 17-0934 Lock Only 1993-06
Big Twin Front Pulley Conversion Kit
Flange Nut allows 17-0959 Lock Only 2007-up
allows use of 1994-06 front pulley on 1984-
drilling and tapping 12-0268 Nut Only 2007-up
93 models.
of additional set 12-0579 Nut Only 1991-06
VT No. 20-0432
screw locations. 37-0429 Set Screw 2007-up
VT No. Year
20-0214 1993-06
20-0215 1993-06 Offset Components
20-0217 2007-up 24T 25T Nut Set Trans Plate Motor Offset
Sprocket Sprocket Spacer
— — — — 19-0568 .25”
— — — 17-6661 — .437”
— — — 19-0560 19-0561 .5”
19-0104 — — — 19-0569 .75”
19-0105 19-0161 — — 19-0570 1.0”
19-0106 19-0162 19-0576 — 19-0600 1.125”
— — 19-0577 — 19-0601 1.5”
— — — — — 1.175”
— — — — 19-0603 2”
Solid Mount For use with
Sprocket without com- compensa-
tor compo-
pensator
nents
219
Belt and Pulley Kit
1986-up Rear Belt and Pulley Kits for Softail models. Kits include transmission pul-
ley with locknut kit, rear pulley in chrome or natural finish and Dayco belt.
VT No. Year Pulley Finish Tooth Width
20-0314 1986-93 Alloy 32-70 1.50”
20-0317 1994-99 Alloy 32-61 1.50”
20-0698 2000-05 Chrome 32-70 1.125”
20-0748 2007-up Chrome 32-66 20mm
Note: There is no warranty on belts sold when as part of kit or individual replacements.
Final Drive Belts by BDL,

Carlisle or Goodyear.
20-0786 20-0577 Rear Belt
Big Twin, 1¹⁄₂” Wide
Carlisle Goodyear BDL # of Teeth Model
20-4010 — 20-0441 136 1984-96 FLT-FLHT
20-4011 — 20-0440 132 1986-92 FXST-FLST, 1994 FXST
20-0441
20-4012 — 20-0120 126 1980-86 FXSB-FXWG
20-4013 — 20-0478 133 1991-99 FXD
20-4014 — 20-0479 128 1993 FXST-FLST
20-4017 — 20-0501 130 1995-99 FXST-FLST
20-4015 — 20-0500 127 Ratio Change
20-4016 20-0726 20-0455 135 Ratio Change Narrow Belts.
20-4018 — 20-0579 139 1997-03 All FLT VT No. Width Tooth Brand
Big Twin, 1¹⁄₈” Wide
— — 20-0582 135 2000-05 FXST-FLST, 2000-06 FLST 20-0456 1.125” 125T BDL
— — 20-0586 133 2000-06 FXD 20-0060 1.125” 128T BDL
— — 20-0668 139 2004-06 FLT 20-0592 1.125” 130T OE
Big Twin 20 mm Wide Note: There is no warranty on
— — 20-0786 135 2006-up FXST
belts when sold as part of kit or
— — 20-0787 133 2007-up FXST
Big Twin 1" Wide individual replacements.
— — 20-4019 133 2007-11 FLST
— — 20-4020 137 2007-08 FLT
— — 20-4021 140 2009-up FLT
— — 20-4022 131 2007-up FXD 20-4023
Big Twin 24mm wide
— — 20-4023 133 2012-up FXST, FLST
Rear Pulley Spacers

1980-99
Pulley Adapter Ring will adapt the 2000-up 1.125”
wide types to 1999 and earlier wheel hubs, which
will allow use of a 170 mm wide tire on 1999 and Pulley Spacers provide offset when
earlier applications. required, with ⁷⁄₁₆” bolt holes. Each disc mea-
VT No. 20-0342 sures 2¹⁄₁₆” inner diameter with 4⁵⁄₁₆” outer
diameter for 1980-99.
VT No. Thick Material
23-0320 ¹⁄₁₆” Steel
19-0128 ³⁄₁₆” Steel
19-0452 ³⁄₁₆” Billet
37-0990 37-0031 19-0413 1
/4” Steel
2000-up Pulley Bolt Kits. 19-2001 ⁵⁄₈” Billet
VT No. Type Thread Fits 20-0130 ¹⁄₂” Polished Stainless
37-0990 Allen 2000-06 FXST, FLST; 2000-05 FXD 20-0129 ¹¹⁄₁₆” Polished Stainless
37-0031 Hex 2000-06 FXST, FLST; 2000-05 FXD 20-0132 1” Polished Stainless
37-9236 Allen ³⁄₈” x 16 x 1 1984-1991 FXST, FXR, 1981-84 FX 20-0134 1³⁄₈” Polished Stainless
1986-91 FLST
Tools
Belt Tension Gauge designed Big Twin Final Drive Tool fits final drive pul-
to aid in properly adjusting belt ley, so the nut can be properly set to torque
tension on models with a sec- specifications. Replaces 41184.
ondary drive belt. VT No. 16-0649
VT No. 16-1765
220
Inner Shifter Arms
21-2074
Shifter Bracket
21-2065
21-0101 21-0105 21-2061
BIG TWIN
21-0794
21-0675
21-0880
Chrome Frame Mount Shifter Brackets as stock replace-
21-0676 ments or when installing forward controls. The 21-0105 and
Chrome Inner Shifter Arms fit through frame mount shifter 21-0101 are the exact FXST-FXWG type which features
plates on Big Twins and feature splined ends. footpeg boss welded to shift plate, stock on 1980-up models
which have corresponding brake unit. Order inner shift arm
VT No. Year/Model
separately.
17-9770 1984-94 FXR
VT No. Style Fits
21-2065 1986-17 FLST 21-0101 Heavy 1984-89 FXST
21-2074 1990-99 FXST 21-0111 Black Custom Applications
1993-02 FXDWG 21-0105 Stock 1990-99 FXST
21-0794 2003-05 FXDWG 21-0123 Stock 2000-06 FXST
21-0675 Solid, 2000-06 FXST 21-2061 Stock 1986-99 FLST
21-0676 Slotted, 2000-06 FXST 37-9104 Nylon Inner Outer Washer Set
21-0880 Solid, 2007-17 FLST
Chrome Jiffy Stand and Shifter
Chrome Replica Foot Shifter Lever Mount Plate Bolt Kit to attach assem-
Cover fit 1986-99 FLST. bly to left side of frame.
VT No. 42-0433 VT No. Type Year
9617-18 Hex 1936-99
42-0433 9617-18T As Above
V-Twin Shifter Kit includes 5 small and 5 nylon

washers to reduce vibration at inner shift arm and
pedal. 10-2511 10-2561
VT No. 37-9104 Shifter Bracket Bushing
VT No. Fits
10-2511 1985-93 FXST
10-2561 1994-17 FXST-FLST
Shifter Rod Ends

21-2077 21-0548 Ball End Swivel with ⁵⁄₁₆ x 24 21-0613 21-0611
thread.
VT No. Thread
21-2077 Left Hand Short Stud
21-0548 Left Hand Long Stud
Chrome Forked Rod End Clevis is threaded 21-2020 21-2016
⁵⁄₁₆ - 24 for use on shifter rod. Pin size is ¹⁄₄.
VT No. 21-2033
21-0610
Clevis Pins, zinc plated includes cotter pins and Self-Aligning Rod Ends. Heim joint type swivel allows align-
washers. ment up to 28° off center. Self lubricating brass ball socket
VT No. Use available for shifter or brake rod ends, ⁵⁄₁₆ x 24 or with ⁵⁄₁₆ hole.
23-0421 1930-69 Brake, 1982-up Brake 21-2016 has ⁵⁄₁₆ x 24 stud.
1952-84 Shifter VT No. Size 21-0549
21-1986 1970-81 Brake 21-0613 ⁵⁄₁₆” x 24 x 2”
Shifter Rod Jam Nut Set features tapered 21-0610 ⁵⁄₁₆” x 24 x 51.4mm
design to cover excess rod thread, pair, ⁵⁄₁₆ x 21-0611 ⁵⁄₁₆” x 24 and 48mm
24 thread. 21-2016 1984-94
VT No. 37-0863 21-2020 Custom
21-0549 ⁵⁄₁₆” x 24 x ⁵⁄₈”
221
Billet Shifter Lever Chrome Billet
Shifter Lever
features slotted
Slotted Billet Lever with cats paw foot-
peg. Fits 1990-17 FXST and 1991-17 design. Fits 1990-
FXDWG. VT No. 21-0691 17 FXST and
1991-17 FXDWG.
Chrome Billet Shift VT No. 21-0670
Lever fits 1990-17
FXST and 1991-17
FXDWG models.
VT No. 21-0221 Billet Lever
with Cats
Chrome Heel Shifter Lever adds Paw Footpeg
the convenience of a heel shifter for 1990-17
to your footboard equipped ST FXST, 1991-17
model. This traditional lever permits FXDWG.
you to upshift with a downward tap VT No. 21-0690
of your boot heel eliminating the
need to wedge your toe under the
forward lever. Styled to match the
OE toe shifter this kit include shifter
lever, extended shaft, shifter peg
and mounting hardware. Fits 2018-
up FLDE, FLFB, FLFBC, FLHC,
FLHCS,FLSL equipped with foot-
boards. VT No. 21-1342
Stock Shifter Lever

21-0793
21-0311 21-2063
Chrome Shifter Levers for Big Twin models.
VT No. Zinc Fits/Type
21-0311 21-0359 1984-85 FXST,
not threaded
21-2068 21-2068 As Above, Stainless Steel
21-0302 21-0457 1986-89 FXST
21-0307
21-2063 1990-17 FXST, 1991-17
FXD, FXDWG, 1981-86 FX
Spline
21-2056 21-0307 1982-94 FXR Spline
21-0302 21-0982 FXR Heel-Toe, SS
21-2056 1987-17 FLST Heel & Toe
21-0751 21-0793 1990-05 FXD Heel Toe fits
21-0752
only with 27-0920
Billet Style Shifter Lever is machined and polished for a beauti-

ful custom look. Available in mirror chrome or black powder coat.
Includes chrome hardware. *Note: Must order shifter pegs sep-
arately. Fits 2018-up FXFB, FXFBS, FXRB and FXRBR models
equipped with forward controls.
Chrome Black
21-0751 21-0752 Heel Shifter Lever features swivel peg location to fold out of the
way. Fits 1986-17 FLST, 1988-up FLT, FLHT.
21-0753 21-0754 VT No. 21-0471
21-0687
21-0684
Billet Style Heel Toe Shifter Lever Kit adds a heel-toe shift
action. Available in chrome or black. Kit includes front & rear lever
and hardware. Must order shifter pegs separately. Fits 2018-up Shifter Rod Kit Flame Style.
FLDE, FLFB, FLFBC, FLHC, FLHCS and FLSL equipped with VT No. Fits Length
footboards. 21-0684 1993-2005 FXDWG 11³⁄₄”
Chrome Black
21-0686 2002-up V-Rod 13.44”
21-0753 21-0754
21-0687 2000-up FXST, FLST 12¹⁄₂”
21-0688 2000-up FXST, FLST 13¹⁄₂”
222
Complete Chrome Shifter Rod Kits as listed include rod and ends.
FXD-FXDWG Shifter Rod Kits
Shifter Rod Kit for ST
21-0500
BIG TWIN
21-0327
21-0322
21-0328 21-2045
21-0338
Shifter Rod Sets. 21-0501

VT No. Year Model Finish
21-0322 1991-05 FXDWG Chrome
21-0327 1991-05 FXD Chrome
21-0328 1991-05 FXD Zinc
21-0338 2006-up FXDWG Chrome
21-2045 1985-94 FXR Zinc
42-0917 1991-05 FXD Chrome Cover Only for
Transmission Shifter Lever
Chrome Shifter Arm and Linkage Kits include inner arm, inner
shifter lever, rod with ball and swivel ends.
VT No. Model
21-0500 1986-up FXST
21-0501 1990-up FLST
21-0672 21-0678
Chrome Billet Shifter Rod Kits
includes heim joint ends. Stock length 21-2039
rod is 10⁵⁄₈” long. Fits 1986-up FXST,
Chrome Shifter Rod Kit fits 1980-up FLT and 2000-up Softail.
FLST, 1991-up FXDWG.
21-0223 VT No. 21-2039
VT No. Length
21-0672 Stock
21-0678 Stock 21-2031
21-0223 Extension +2”
21-2023
Chrome Shifter Rod Kit fits 1985-99 FXST-FLST.
VT No. Item
21-2031 Kit
21-2022 Rod Only
Chrome FXST Shifter Linkage includes transmission arm cover,
rod, two swivel ends and nuts. Parts sold separately.
VT No. # Item
21-2031 B, C, D Rod Kit only
42-0722 A Arm Cover only
21-2022 B Rod only
21-2020 C Swivel End
21-2023 D Ball Joint End
21-2074 E Inner Lever
Shifter Rods
21-2022 21-0546
Straight Shifter Rods are ⁵⁄₁₆” VT No. Length Finish

diameter with ⁵⁄₁₆” x 24 thread at 21-0330 11³⁄₄” Chrome
each end. *Note: Offset 21-2022* 12” Chrome
VT No. Length Finish 21-0321 12” Chrome
21-0324 3⁵⁄₈” Chrome 21-0333 12¹⁄₂” Chrome
23-0252 7³⁄₄” Chrome 21-0334 13¹⁄₂” Chrome 21-0270
23-0934 8¹⁄₄” Chrome Chrome ⁵⁄₁₆” Shifter
23-0257 14¹⁄₂” Chrome Rod Extension with
23-0253 10¹⁄₂” Chrome 21-0332 20¹⁄₄” Chrome
21-0546* 11¹⁄₄” Chrome male and female ends.
21-0271 VT No. Length
21-0270 2”
21-0271 3” 223
Forward Control Set
22-0758
Left
22-0758
Right
22-0755 Right
22-0755 Left
22-0758
Installed
Left
22-0758
Installed
Right
22-0767
Right
22-0760
Installed
Right 22-0767
Left
Chrome Billet Forward Control Set fits 1986-99 Softail, 1958-

84 FX-FL. Includes rubber belted pegs as shown. Includes shift-
er side and brake side with master cylinder. Order shifter rod and
22-0760 stainless steel brake lines separately.
Installed Note: 3” extended units 22-0758 not suitable for FLST models
Left with stock fender.
VT No. Position
22-0760 Stock, Note: this is chrome
22-0755 +2”
22-0767 +2” with Pirate Pegs
22-0758 +3”
22-0760 Shifter Chrome Shifter Rod, Stock
21-2031 1986-up Softail
Chrome Shifter Rods fit 2” and 3” extended controls.
21-0220 1986-99 Softail
37-6500 Replacement Mounting Bolts
Maltese Brake Pedal Pad
VT No. 21-0699
22-0760 Brake
21-0220 21-2031
21-0699
224
1986-99 Forward Control for FLST
BIG TWIN
22-0508
FLST Brake and Shifter Control Mounts use these brackets

and mounts to put FLST Controls and floorboards on 1984-99
Brake Side Kit includes black or chrome backing plate, FXST 5-Speed models. Order components separately or as
chrome pedal, chrome master cylinder and cover. Related kits. Floorboards not included.
hardware included. Order line separately. Shift Side Kit includes chrome shift mount plate, 2 chrome
VT No. Item shift levers with rubbers, chrome floorboard mounts, chrome
22-0507 Complete Kit inner and rod assembly. Related hardware included.
22-0512 Complete Kit with chrome plate Shift Side
Brake Side Components 1986-99 FLST. VT No. 22-0508
23-9229 42407-87B Brake Pedal Chrome
Shift Side Components 1986-99 FLST.
28-2233 42416-83 Rubber for above
VT No. OEM Item
23-9235 42431-87 Mount Plate, Black
21-2061 33630-90 Shift Mount Plate
23-9246 42431-87A Mount Plate, Chrome
27-1692 50990-86B Floorboard Mount Strap
23-9236 50992-87 Rod End
27-1690 50989-86 Mount Stud
23-0650 42468-87 Master Cylinder
21-2065 33668-90A Inner Shift Lever FLST
28-2005 40922-87 Rubber Boot
21-2042 33895-82 Lever, 2 used
42-0316 41745-79 Master Cylinder Cover
21-2031 11729 Chrome Shift Rod Kit with Ends
23-8822 40957-87A Brake Line
23-9234 42301-87 Master Cylinder Stud
Black Extended Reach Forward
Control Kit extends the rider foot
controls a full 3” forward of the
stock location, providing the tall
rider a comfortable riding position. 22-0512
2018-up FXBRS, FXBR without
ABS
VT No. 22-0132
Black Extended Reach Forward
Control Kit extends the rider foot
controls a full 3” forward of the
stock location, providing the tall
rider a comfortable riding position.
Fits 2018-up FXFBS, FXFB with-
out ABS. VT No. 22-0131
For V-Rod
Shock Absorber Mounting Kit Chrome Hose Shield fits V-Rod
includes spacers, allen polished screws, models.
washers and nut. Fit 2002-up VRSCA. VT No. 42-0965
Chrome Hardware Kits for 2002-up V-Rod by Colony VT No. 2158-11-P
VT No. Item
Motor Oil Filler Plug/Dipstick
2154-3 Front Axle Nut & Spacer Kit
with O-Ring. Replaces 26541-01K. Front Axle Nut and Spacers
2156-4 Rear Axle Nut & Spacer Kit
Fits 2002-up VRSCA. Kit available with grooved or
2158-11-P Rear Shock Mount Kit
VT No. 2160-1 smooth spacers. Replaces
2160-1 Motor Oil Filter Plug & Dipstick
2161-2 Front Axle Cover Set 43642-01 spacers.
Rear Axle Nut and Spacers Kit VT No. Type
2167-2 Upper Case Plug
available with smooth spacers. 2153-3 Grooved
2171-17-P Clutch Cover Mount Kit
Replaces 43571-01 and 40437-01 2154-3 Smooth
2172-16-P Alternator Derby Cover Mt Kit
spacers. Fits 2002-up VRSCA.
2173-3-P Sprocket Cover Mounting Kit Upper Crankcase Plug and
VT No. 2156-4
2175-4-P Fork Bracket Mount Kit Gasket Kit. Custom knurled
2176-8-P Frame Assembly Kit and decorative chrome plug with
2177-8-P
2178-4-P
Shifter Mount Kit
Headlamp Mount Kit
Note: V-Rod gasket. Replaces 1034M and
6298M.
2179-7-P
2180-12
Windshield Mount Kit
Handlebar Master Cylinder
Production VT No. 2167-2

1021-P
Cover Allen Screws
Polished Allen Show Bike Kit
2002-2017 canceled
2168-22-P Polished Cam Cover Mount Kit
March 2017!
Born Died
2002-2017 225
Parts for FXR 22-0348
1982-94
27-1510 37-9118 37-0575

FXR Mid Control Kit includes the shifter and brake pedal.
VT No. Year
13-0154 22-0348 1982-86
27-1718
22-0407 1987-94
Brake Plunger Zinc Assemblies.
13-9162 VT No. OEM Fits 23-9173
Chrome Kickstands and Components for FXR-FXRS-FXLR 23-9173 42437-87 1982-E86 FXR
VT No. Year Item 23-0039 42437-81 198E-E87 FXR
27-1510 1982-90 Kickstand 23-9171 42448-87 1987-94 FXR
37-9118 1982-90 Kickstand Pin FXR Brake Pedal
27-1718 1991-94 Kickstand 23-0052 Brake Pedal Pin
37-0575 1991-94 Kickstand Pin 23-0138 Brake Pedal, Alloy
13-0154 1982-90 Kickstand Spring, Chrome 23-0139 Brake Pedal, Polished Alloy 23-0139
13-9162 1991-94 Kickstand Spring, Chrome 23-0016 FXR Brake Pedal Assembly
22-0348 1982-94 Mid Control 23-0030 FXR Rear Brake Clevis Zinc Plated
23-0039 FXR Pedal Rod End Kit Zinc Plated
30-0885 23-0052 FXR Brake Pedal Pin
Stainless Steel Heel Toe Shifter
Lever is a one piece design for
FXR Drag Pipe Set 1³⁄₄” 5-speed models with mid controls.
VT No. Year Fits 1982-94 FXR.
30-0885 1982-83 VT No. 21-0982
30-0886 1984-94
31-0189 31-0188 FXR Exhaust Pipe Brackets,
zinc plated.
VT No. OEM Type 17-9770 17-9769
31-0189 65670-82 Front
Inner Shifter Levers
31-0188 65671-82 Rear
VT No. Year
31-1016 65670-82B 1986-94
17-9769 1982-85
Front
17-9770 1984-94
FXR Exhaust Bracket Mounting Block 21-0982 Heel Toe Shifter Lever
fits 1982-86 FXR models. 21-0307 Shifter Lever
Sold as each. VT No. 28-0229 28-0982 Rubber Set
T-Bolt Set is a replacement for all
of our muffler pipes which have 50-1106
31-2116 channel type mounting. Supplied 50-1064
with nut.
VT No. U/M
31-2116 Pair Stock Type Rear Fender fits 1981-up FXR-FXRS models.
31-0223 10 pack Replaces 59634-81A.
Chrome Polished Item Year
50-0768 Fender 1981-94 FXR
50-1064 50-0286 Struts 1982-86 FXR
27-1565 27-1568 50-1106 50-0285 Struts 1987-94 FXR 50-0768
Chrome Rear Belt Guards for models listed.
VT No. Fits
27-1568 1987-94 FXR-FXRS-FXLR
27-1565 1985-86 FXR-FXRS-FXSB
Rear Axle Kits include chrome axle, nuts, sleeves and spacers
for each application. Nut kit includes axle nuts in chrome. Fits belt
drive.
Chrome
Kit Cpt Spacer Axle only Nut Kit Fits
44-2001 44-0341 44-0219 8715-4 1982-95 FXR
Rear Axle
44-0219 44-0249
226
Forward Control
for FXR-FXRS
22-1035
BIG TWIN
Right
Right Left
22-0761
22-0761
22-1035
1982-94 FXR Billet Forward Control

includes master cylinder.
VT No. Item
22-1035 Left 22-0761 Kit
21-0223 Rod
23-0859 Master Cylinder Rebuild 21-0223
22-0782
22-1004 Shift
Chrome FXR Forward Control Set. Complete chrome set
brake and shifter units are a replica of the comfortable FXST
FXR-FXRS Forward Control Set fits all 5-Speed FXR-FXRS
style which has pegs in full forward position. Features one piece
series Shovelhead or Evolution powered 1982-up. Installation
does not require the primary cover to be removed. All parts are brake rod which adapts directly to stock master cylinder, No
chromed and the footpegs provided are “O” ring style, does not need to relocate master cylinder on all 1982 and later FXR-
fit Dynaglide. FXRS-FXRT also 1985 FXS-FXE. Chrome cover included to
VT No. Year/Model cap shifter shaft after installation.
22-1035 1982-94 FXR Chrome VT No. Year Type
22-0782 1982-94 FXR Black 22-1004 1982-up Shift Side
Shift Shaft Cover. Chrome acorn style has ½”
inner diameter to fit over unused shifter shaft in
primary cover when installing forward controls. Sold
each. VT No. 37-8872
Covers for FXR

Cast Inner Primary
Cover fits 1990-93 FXR. 1982-94 FXR
Chrome FXR Driver Footpeg
VT No. Finish A Mount Brackets fit 1982-94 all
43-0233 Inner
FXR. Use with male style pegs.
43-0233 43-0204 Outer Chrome
C B VT No. # OEM Type
27-0640 A 50531-81 Right Mt
Chrome Oil Tank fits 1982-
27-0639 B 50636-81A Right Ext
94 FXR models. Includes 27-0641 27-0638 C 50639-81 Left Ext
mounting hardware and hose. 27-0641 Set
Replaces 62406-81. 27-0767 As Above Black
VT No. 40-0094 21-0982 Shifter Lever
Chrome Side Cover Set, steel for Stainless Steel
FXR. FXR Passenger Footpeg Kit includes
VT No. 42-0100 chrome brackets and bolts, which moves
passenger footpeg higher and more for-
ward. Stock or custom ¹⁄₂” stud footpegs
can be used.
VT No. 27-1531
227
2000-17 Forward Control for FLST
2000-06 Brake/Shifter Side
Chrome Brake and Shifter
Components for TC-88 models
Mount Plates replace original
FLST, FLSTF, FLSTS. FLST
units on FLST models.
VT No. OEM Side Years style controls accept foot-
23-0095 42431-00 Right 00-06 boards.
21-0126 Set 21-0122 33630-00 Left 00-06 Brake, FLST
22-0520 VT No. Item
21-0126 — Set 00-06
22-0520 Kit
Shifter Side
22-0521 Kit
Brake Side Components FLST, 2000-17.
VT No. OEM Item
12-0597 7951 Jam Nut
Shifter Side Components 2000-up FLST. 12-0987 40918-87 Retaining Ring
13-9170 40920-87 Return Spring
VT No. OEM Item 28-2005 40920-87 Pushrod Boot
17-9300 6057 Nylon Washer 23-0458 41755-99 Master Cylinder Assembly, 2000-05
14-0913 11191 O-Ring 23-7740 41957-97 Pushrod Kit
28-2233 42416-83 Brake Lever Pad FLST, 2000-05
21-2039 33719-79A Shifter Rod Kit
23-0095 42431-00 Foot Brake Mount FLST, 2000-06
21-2065 33668-90B Shifter Lever, 2000-17 15-0540 42455-99 Gasket Reservoir, 2000-05
10-2561 33708-94 Bracket Bushing 23-0460 42597-00 Chrome Brake Lever FLST, 2000-06
21-2042 33895-82C Shifter Lever Arm (2) 23-0768 45149-99 Chrome Reservoir Cover, 2000-05
44-0557 50972-75 Grease Fitting, 2000-05
21-0317 34611-65A Shifter Rubber 14-0568 41731-88A Gasket, 2000-06
23-0612 41747-82A Banjo Bolt
23-9177 42382-87B Piston Kit, 2000-05
23-0405 42460-80B Clevis Pin
32-0443 72023-51C Stoplamp Switch
2000-17 FXST Control Pieces

23-0094 21-0123
21-0250
23-1210
22-0829
Chrome Brake and Shifter Mount Plates replace original
units on FXST models.
VT No. OEM Side Year
21-0250 33920-00 Right and Left 2000-06
23-0094 42507-00A Right 2000-06
21-0123 33683-00 Left 2000-06
22-0829 Kit, Left 2000-06
Brake Side Components FXST 2000-17.
VT No. OEM Item
12-0597 7951 Jam Nut
12-0987 40918-87 Retaining Ring
13-9170 40920-87 Return Spring
28-2005 40920-87 Pushrod Boot
23-0458 41755-99 Master Cylinder Assembly, 2000-05
23-7740 41957-97 Pushrod Kit
23-0094 42507-00 Foot Brake Mount FXST, 2000-06
28-0548 42532-82 Brake Lever Pad FXST, 2000-05
15-0540 42455-99 Gasket Reservoir, 2000-05
23-0459 42515-00 Chrome Brake Lever FXST, 2000-06
23-0768 45149-99 Chrome Reservoir Cover, 2000-05
44-0557 50972-75 Grease Fitting
Mid Control Mount Kit includes left and right supports and 14-0568 41731-88A Gasket
mounting hardware in a chrome finish. Fits 2018-up FXBB, FXLR 23-0612 41747-82A Banjo Bolt
models with mid controls. 23-9177 42382-87B Piston Kit, 2000-05
23-0405 42460-80B Clevis Pin
VT No. 27-0179
32-0443 72023-51C Stoplamp Switch
23-1210 44972-08 Brake LIne
228
VT No.
22-1017
Shown
Forward Brake Kit
BIG TWIN
22-0506 Installed
22-0505
22-1017
Original Forward Brake Control Assemblies will equip all

Big Twins with hydraulic brakes and powered by either 1970-
83 Shovel or 1984-99 Evolution engines. Available in either
Wagner or Kelsey Hayes styles, with or without master cylin-
ders. Footboards can be fitted to our Wagner style kits VT No.
22-1015 22-0500, 22-0505 or 22-0506. Wagner styles use 41761-73
master cylinder, or Kelsey Hayes type 41576-79A, for those
wishing to utilize their existing master cylinder. Complete assem-
blies include detailed instructions and diagram for installation.
Display packaged.
VT No. Type Master Cylinder
Original Forward Shifter Control Kit. Order complimenting 22-0500 Wagner Without
forward brake control separately. All kits attach to existing com- 22-0505 Wagner With Plain
ponents on shifter mechanism. Instructions and diagram includ- 22-0506 Wagner With Chrome
ed with each kit. Display packaged! 5-Speed 22-0501 Kelsey Hayes Without
VT No. Fits 22-1017 Kelsey Hayes With Chrome
22-1015 1982-94 FXR *Note: For kits 22-0500, 22-0505, 22-0506, 22-0501, and
22-1008 1985-99 FXST 22-1017, use Russell front line 23-8809 and rear line 23-8915
No Mix-Ups No Searching One Kit Does It All For Less! for disc brake models and tee 23-0707.
Shifter kit on this page is compatible with VT No. 22-0500, Footpeg Mounting Studs fit through Wagner or Kelsey Hayes
22-0501, 22-0505, 22-0506, 22-0510, 22-0511 and 22-0512. master cylinders to mount foot pegs to these forward assem-
blies. Stud side shown accepts that size footpeg yoke.
VT No. Type
37-8986 Kelsey Hayes Type ³⁄₈ - 24
37-8987 Wagner Type ¹⁄₂ - 20
22-0779
22-0772
Installed
Billet Forward Control.

22-0778
Black Polish Fits
22-0772 22-0777 1984-99 FXST, FLST
22-0778 22-0779 2003-13 FXD
229
Forward Control Kits for 1982-99 FXST
KITS
V-TWIN 78
19
Since L
E STIL
THEY’R WAY...
EST
THE B
22-1085
22-1063
Extended Forward Controls for FXST. Designed for riders

over 6 ft. tall. This chrome kit extends the footpegs 4” forward
and keep the right and left peg parallel while retaining stock
peg to pedal distance. Brake and shifter plate supplied in heavy
5/16” steel along with longer brake and shift rods. Fits FXST, FXST Chrome Replacement Style Forward Control Kits
FXSTC and FXSTS. include mounting brackets, levers and correct linkage for 1982-
VT No. Year/Type 99 FXWG and FXST models. Master cylinder not included.
22-0492* 1986-Early87 Complete assembly VT No. Fits
*Note: Above models fit 1986 models when oil filter on shift 22-1062 1982-Early87
side is relocated. Can fit 1984-85 models if master cylinder 22-1063 1987-89
bracket is fabricated and welded in place. 22-1085 1990-99
22-0133
22-0716
Left
22-0716
22-0130
22-0716
Right
21-0109
Extended Reach Forward Control Kit extends the rider foot Chrome Forward Control Kit fits 1958-86 Big Twins, 1986-99
controls a full 3” forward of the stock location, providing the tall FXST. Includes shift and brake sides including ³⁄₄” bore chrome
rider a comfortable riding position. Kelsey Hayes style master cylinder. Kit is supplied with O-ring
VT No. Finish Fits pegs, but can be replaced with other style of clevis mount pegs. A
22-0133 Chrome 2018-up FXFB, FXFBS universal nylon brake line kit, chrome mount hardware and 4 and
22-0130 Black 2018-up FXFB, FXFBS 5 speed styles shift rods are also included.
VT No. Item
22-0716 Kit Complete
21-0109 Shift Lever Only
230
5-Speed Foot
Clutch Control Kit
BIG TWIN
22-0499
22-0735
Installed
Note: Clutch is disengaged in heel down position. 22-0727

Slap Stick 1986-99
22-0735 Softail Kit
Jockey Kit
includes assem-
bly with jockey
handle for 5
Speed 1989-99 Note: Clutch is disengaged in heel down position.
Big Twins mod-
22-0727 22-0732
els.
VT No. 22-0735
Left Side Frame Spacers will position forward
pedals for primary clearance.
21-0570
VT No. Height
21-0175 .50”
21-0313 1.25” 1986-99 Softail Foot Clutch Kit includes rocker assembly,
21-0178 1.75” cable bracket and spacer block.
21-0567 Jockey Handle includes knob. VT No. Finish
VT No. Model Speed 22-0727 Chrome
21-0567 1986-05 FXST-FLST 5 22-0732 Black Note: Must order hardware separately.
21-0570 1986-05 FXST-FLST 5 & 6 Black Clutch Cable Bracket for
21-0589 1980-up FLT 6 5 speed foot clutch. Fits 1989-99
FXST. VT No. 22-0498
Billet Jockey Shifter Kit includes Foot Clutch Conversion Kit allows
top mount and rod for 1986-99 use of Police Rocker Clutch VT
Softail models. Order knob sepa- No. 22-0720 or 22-1016 on 1987-
rately. 99 FXST-FLST where the clutch
VT No. Item cable goes directly into transmission
21-0180 Kit side cover. Kit includes bracket and
21-0129 Lever Assembly cable. May not be used with front
engine bar.
Rubber Pad Sets VT No. Item

22-0499 Kit (Bracket and Cable)
22-0497 Chrome
28-0301 28-0302 28-0312 22-0720 Rocker Only
36-0516 Cable Only
21-0313 Spacer Block (1.25”)
21-0178 Spacer Block (1.75”)
22-0720
22-0720
Installed
28-0301 Right
Left Side Side
Rocker Type Clutch Pedal Assembly. Replaces 36810-65A

Clutch and Brake Pads in a three piece sets. for 1936-78 Big Twins. When installed on any 1965-78 FL,
VT No. Color Item 18-3606, clutch release arm must be used. Order appropriate
28-0301 Black Three piece rod separately. For 1965-up primary applications order VT No.
28-0302 White Three piece 21-0313 alloy spacer block separately.
28-0551* Black One piece *Note: Oval Pad only VT No. Item
28-0312 Black Three piece, Replica 22-0720 Chrome Complete
22-1016 Black, with Chrome Spring Friction Cover
22-0997 Parkerized Replica 231
Foot Clutch Control Kit
VT No. 22-0951 VT No. 22-0953
22-0953 Jockey Pedal Plate

Installed with shaft.
VT No. 21-0765
21-1665
22-0951
22-0952
Jockey Kits include shifter peg.

VT No. Year Model Type
22-0951 2000-06 FLST Footboards
22-0952 1986-99 FXST Footboards
22-0953 1990-99 FXST Pegs
21-0765 1980-99 FX Pegs
31-1345 1990-99 ST Bracket
21-1667 2000-06 ST Bracket
21-0767 1990-99 ST Shaft
22-0953
21-0151
21-0151
21-0163
VT No. 21-0765
VT No. 21-1667
VT No. 21-0767
21-0163
Jockey Pedal Conversion Kit allows conversion of shift side 21-0765

of our Big Twin extended 2” and 3” forward controls to operate
as foot clutch. Kit includes splined inner billet arm, black bracket
and black cable with ends. Order shift arm or kit separately for 21-0767
appropriate year.
VT No. Year Type Model 21-1667
21-0151 1987-up 5 Speed Softail
21-0163 1979-84 4 Speed Big Twin
36-0516 All Cable
21-0165 Chrome Billet Spacers fit left side shift (3
hole) and right side brake(2 hole) for 1984-99
Softail.
21-0166 Shift Brake Thick
21-0175 21-0164 0.50”
21-0165 21-0166 0.75”
21-0170 1.25”
21-0171 1.5”
232
21-0114
Softail Jockey Shift Kit
BIG TWIN
22-0711
Installed
22-0712
21-0116 22-0712 Installed
21-0116
Installed Police Style Jockey Shift Kit clamps to all Big Twin front frame
with 11/8 ” tubes for 4-Speed ratchet type, 4-Speed rotary and
5-Speed model. VT No. 22-0711 and 22-0712 feature a smooth
gate for shifting. Use either rocker clutch pedal or jockey pedal
36-0516 will fit with 3.5 or 5 gallon tanks.
VT No. Year Speed Type Tank
22-0710 1936-79 only 4 Handshift 5
22-0711 1952-79 Big Twin 4 Ratchet Top 5
1979-84 FLH 4
Jockey Pedal/Handle Kit fits FXST models. Includes chrome 22-0712 1979-84 FXE 4 Rotary 5
pedal, plate, cable and chrome handle. 1979-84 FX-FLST 5
VT No. Item Years 1984-12 FXST
21-0114 Kit 1986-99 1986-12 FLST
21-0116 Kit 2000-06
21-0570 Handle Only 1986-05
36-0516 Cable 1986-up
21-0117 Cable End Bushing
Braided Foot Clutch Cable fits
21-0588
22-0953 kit.
21-0697
VT No. 36-1456
21-0697 Installed
36-1456 Red BaronTM Shifter Knob is 1.5” shape cross. Machined of
Jockey Shifter Knobs. Billet with natural finish.
21-2011 21-1936
VT No. Style Thread VT No. Thread
21-2011 Black, large ³⁄₈ - 24 21-0697 ³⁄₈ - 24
21-1936 Black, small ³⁄₈ - 24 21-0703 ⁷⁄₁₆ - 20
21-0588 Adapter ¹⁄₄ - 24 Internal Thread,³⁄₈-24 Ext. Thread
Brass Skull.
VT No. Size
21-2121 ³⁄₈ - 24
21-0845 ³⁄₈ - 24
21-2015 None
21-0650 ⁷⁄₁₆ - 20
233
Billet Forward Control Kits
22-0120 22-0128
22-0127
22-0125
Forward Control Kits. Note: Finish of Pegs and Forward Control.

VT No. Peg Style Finish Fits Ext Forward Control
22-0120 Concave Black 2000-up Stock Drilled
22-0125 Concave Black 2000-up +2” Slotted
22-0127 Swiss Cheese Black 2000-up +2” Slotted
22-0128 Micro Hole Black pre1999 Stock Slotted
22-0827 Tribal Chrome Custom
Custom Chrome Billet Forward Control Kit requires
use of the inline type master cylinder and fabrication of
the shifter linkage. Includes footpegs and tribal cut con-
trol pedal. Fits custom application.
VT No. 22-0827
23-4075
Chrome Billet Forward Control Kit for custom use on hydrau-

lic foot clutch models Features left side hydraulic foot clutch
control assembly and right side hydraulic brake control. Includes
rubber belted footpeg set and two ⁵⁄₈” bore master cylinders.
Requires fabrication of brake and clutch line with 10mm banjo
type ends. Order brake and clutch lines separately. Fits custom
applications.
VT No. Item
Chrome Billet Forward Control kit includes shift and brake
22-0793 Kit
side controls. Kit is stock length with rods included.
23-4075 Replacement Clutch Side Master Cylinder
Fits 1987-99 FXST.
23-3028 Replacement Brake Side Master Cylinder
VT No. 22-0860
234
Billet Forward Control Kits
BIG TWIN
22-0110
22-0129
22-0114
22-0112
22-0115
22-0117
22-0118
Forward Control Kits. Note: Finish of Pegs and Forward Control.

VT No. Peg Style Finish Fits Ext Forward Control
22-0110 Swiss Cheese Black 1970-99 FX Stock Black Swiss
22-0129 Swiss Cheese Chrome 1970-99 FX Stock Chrome Swiss
22-0112 Concave Chrome pre1999 Stock Slotted
22-0114 Concave Black pre1999 +2” Slotted
22-0115 Spearhead Chrome pre1999 +2” Slotted
22-0117 Swiss Cheese Chrome 2000-up Stock Slotted
22-0118 Swiss Cheese Chrome 2000-up +2” Slotted
235
Footboard Kit for FXD
Left Side Right Side
27-0920
27-0920
Wyatt’s Footboard Kit for FXD is designed for use on all 1996-up FXD models. It features the same style used on all touring models
to maximize rider comfort. The kit comes complete with footboards, mounts, brake pedal, extended brake rod and extended shifter rod
and mounting hardware.
VT No. Item Fits
27-0920 Kit 1995-05
22-0453*Kit 2006-17
*Note: Cannot be used with highway bars or engine guards; and does not include heel toe lever. Requires the use of stock shifter lever
or separate purchase of heel-toe shifter lever VT No. 21-0793.
Replacement Parts for the Above Floorboard Kits 22-0453 27-0920
23-0289 Pedal, 1995-05
27-1011 Board, All
21-0793 Shifter Lever, All
17-0166 Transmission Shifter Lever, 2006-17
23-0871 Brake Pedal, 2006-17
Chrome Engine
Bar features 1¹⁄₄”
tubing for use with
27-0920 footboard
kit on 1995-05 FXD
models.
VT No. 51-0434
27-0920
Left Side Installed Right Side
Installed 21-0766
21-0768
Mid Shift Lever Retainers will

21-0768 Installed
secure inner primary shift lever
when installing forward controls.
VT No. Year
21-0766 1991-05
51-0434 installed with 27-0920 21-0768 2006-up
Reduced Reach
Forward Control Rear Brake Switch Banjo Bolt On fits
Conversion Kit fits 2006-up 2008-17 FXD.
with mid controls. Kit includes VT No. 32-1629
left and right supports, brake
and shift lever, brake and shift
linkages. This moves the rid-
er’s feet 10” forward from the
mid control position.
VT No. 22-0226
236
Forward Controls on this page use existing master cylinder.
Forward Control
for FXD-FXDWG
BIG TWIN
22-0509 Left
22-0770
Right
22-0561
22-0770
Dynaglide Chrome Forward Control Kit. The stock control kit Left
(22-0509) will move mid mount controls on 1991-05 Dynaglide
models to the forward position and can be used as stock replace-
ment on 1993-02 FXDWG. The 2” extended control kit (22-0510)
Note: Shifter Rod Position for Installation
will move mid mount controls on Dynaglide models to the forward
position and can also be used on FXDWG for increased leg room. Chrome Billet Forward Control Set fits 1991-05 FXD. Includes
Order foot rest and shifter pegs separately. rubber belted pegs as shown, and includes left and right sides.
2006-up 1991-05 Item Order shift rod separately. This kit will utilize stock master cyl-
— 22-0509 Control Kit, Stock inder in the original position. Rod included fits directly to master
22-0561 — Control Kit, Stock, Black cylinder.
— 22-0510 Control Kit, 2” Extended VT No. Item
17-1009 — Inner Lever 22-0770 Set
21-0222 Shifter Rod
27-0759
23-0475
Dyna Wide Glide Chrome Forward Control Extension Kit

allows stock forward control pedals to be moved 2” forward Left 22-0788 Right 22-0788
for extra leg room. Kit includes two chrome extension plates,
chrome extended shift rod and chrome extended brake rod. 22-0788
Installation requires utilization of stock brake and shifter pedal
components.
VT No. Year Item
27-0759 2006-17 Kit
23-0475 1992-02 Brake Rod Only
*Note: 2003/2004/2005 OE Style Replacement
Forward Control Kit for 2006-17 FXD models with mid-
23-9191 23-0850
controls. Kit includes all components necessary to convert
a mid-control equipped Dyna® model to forward controls.
Moves controls 11” forward from mid-control foot position.
uses existing master cylinder linkage and footpegs. Chrome
Chrome Brake Rods fit FXDWG models.
finish. Available with or with soft pegs. Both kits will require
VT No. OEM Year
the removal of both the inner and outer primaries for instal-
23-9191 41955-93 1993-02
lation of kit. VT No. 22-0788 includes primary cover gaskets
23-0850 41955-03 2003-17
and seals for installation. VT No. 22-0794 will require sepa-
Chrome Billet Forward Brake Pedal rate purchase of primary cover gaskets and seals for installa-
features forged aluminum construction with tion.
milled slots. Fits 2003-17 FXDWG. VT No. Type
VT No. 23-0478 22-0788 Without soft pegs
22-0794 With soft pegs
22-1679* Short Reach Adapter Kit
*Note: Move controls 1” closer to rider on FXD models when
22-0788 or 22-0794 are installed.
237
Control for FXD
22-0956
FXD Mid Control Kit includes chrome components, is for

stock replacement on FXD mid control models, where the shift-
22-0959 er shaft goes through the primary cover or for the conversion
from forward controls. VT No. 23-1671
23-0850
23-9191
23-0921
Chrome Brake Rod.
VT No. OEM Fits
23-0850 41955-03 2003-17 FXDWG
23-9191 41955-93 1992-02 FXDWG
23-0921 42502-90A 1991-17 Rod, FXD
23-9220
Complete Remote Mount Master Cylinders.

VT No. OEM Fits Item
23-9318 1991-05 FXD
23-9220 42474-90A 1991-05 FXDG Complete
23-9316 As Above Chrome
Forward Mid Control Sets . Comfortable as slightly more 23-0875 42474-06 2006-07 FXDG, Chrome
forward than stock 2006-17 FXD with mid controls and 2014-
17 FXDL.
Chrome Black Item
22-0956 22-0959 Mid Control
22-1671 Stock FXD Pedal
23-0143 23-0921
27-0301
Kickstand Extensions
VT No. Years Fits FXD Rear Brake Pedals.
27-0092 1999-17 FXD VT No. OEM Fits Finish
27-0301 1993-17 FXD Note: Black finish 23-0143 42617-99 1990-17 Chrome
27-0521 1991-17 FXD 23-0921 42502-90A 1991-17 Rod 12” in length
28-0982 1982-94 Shifter Rubber Set
FXD Kickstand.
VT No. Fits Item
27-0521 1991-17 FXD Kickstand Extension
27-0301 1993-17 FXD Extension, Black
13-0176 1991-01 FXD Spring
238
22-0756
Right Billet Kit for FXD-
FXDWG
BIG TWIN
22-0756 Left
22-0527 22-0768 Right

Right
22-0527
Left
Chrome Billet Forward Control Set fits 1991-05 FXD includes
rubber belted pegs as shown. Includes left and right sides com-
plete with master cylinder. Order shift rod separately.
VT No. Item Style
22-0756 Control Set Standard
22-0768 Control Set +3”
22-0527 Control Set +2”
21-0222 Shift Rod Standard
21-0220 Shift Rod +3” 22-0768 Left
23-3005 Master Cylinder
23-0859 Rebuild Kit for 22-0756 and 22-0768
Replacement Chrome End
Cap Set fits brake and shift 21-0220
pivot ends. VT No. 21-0543
Oval Inspection Cover fits 21-0222

FXD-FXST outer primary when Chrome Shift Shaft Cover has ½” inner diameter 37-8872
forward controls are used. to fit over unused shifter shaft in primary cover
Does not have a hole for shift when installing forward controls, sold each.
shaft for 1991-05. Chrome. VT No. Type
VT No. 42-9927 37-8872 Acorn
Smooth Oval Inspection 44-0047 Dome
Cover for primary covers fea- 28-0607
tures black satin finish. 1986- 27-0615
2006 FXDWG. Matching
VT No. 42-1274 Grip Set
Shift Shaft Primary Plug for use when for-
ward controls are installed on FXR-FXD mod-
els to seal the inner primary when eliminating
the mid shift. Includes O-Rings and hardware.
VT No. 17-0650
Order matching grip and passenger set separately.
Chrome Brake Pedal Extended. Extender
VT No. Item
allows the use of any style peg to be used as
28-0607 Grips
a brake pedal pad. Brake pedal pad extender
27-0615 Peg Set
can also be used to move the foot position out
for more comfort. Extender attaches through
the existing ⁵⁄₁₆” bolt hole in the brake pedal. 21-0766 21-0768
Fits 1984-up FXST. VT No. 31-0053
Mid Shift Lever Retainers will secure inner primary shift
lever when installing forward controls.
VT No. Year
21-0766 1991-05
21-0768 2006-up
239
Brake Control Kit
22-1001
Installed
22-1001
Installed
FXST Replica Forward Brake Control for use on all 1970-

99 Big Twin with Shovelhead or Evolution engines equipped
with hydraulic disc or drum brakes. Designed after the 1984-99
FXST which places the driver peg in back of the brake pedal,
so the brake is easier to operate from this comfortable position.
Redesigned to accept a Wagner or Kelsey-Hayes style master
cylinder or GMA masters, also available with chrome KH or 22-1054
Wagner style masters. Hardware includes linkage pedal mount
plate, rubber covered footpeg. This kit is the exact compliment to
our shifter kits listed on opposite page and when used with one
of these kits, places the pegs in forward and raised position.
VT No. Item
22-1066 Dual-use kit without Master Cylinder
22-1001* Complete kit with Kelsey type Master Cylinder
22-1018* Complete kit with Wagner type Master Cylinder
23-1743 Brake Pedal for Above
13-0181 Brake Pedal Spring
Note: Kits VT No. 22-1001 and 22-1018 use Russell stainless
Lines VT No. 23-8809 front and 23-8802 from junction to rear
caliper. Use tee VT No. 23-0707.
Everything You Need To Convert 22-1082

Installed
Hydraulic Brakes To Forward Control
FXST Chrome Stock Style Brake Control Kits includes
Pedal Rubber
23-0466 Brake Pedal Pad with flame design. Fits
mounting bracket, lever and linkage. The 1982-86 type uses
two bolt master cylinder. 1987-89 type has tab with square
1984-up FXST. Bolt on. hole that uses spark plug. The 1990-up type fits models with
VT No. 23-0466 frame mounted master cylinder. Master cylinder not included.
VT No. Fits
22-1054 1984-Early 87 FXWG-FXST
22-1064 1987-89 FXST
23-0243 22-1082 1990-99 FXST
23-0241 23-0245
37-8895 Chrome Brake
Installed Lever Pivot Cover
Kit fits 1984-99
FXST-FXWG.
Extended Foot Brake Pedal. Includes cover,
VT No. Style Fits retainer washer
23-0241 Smooth, 2¹⁄₄” 1989-99 FLST and allen screw.
23-0243 3-Slot, 2¹⁄₄” 1989-99 FLST
37-8895 Details this drab
23-0245 3-Slot 2000-05 FLST area.
VT No. 37-8895
23-1030
23-0360
Chrome Pedal will allow full use of the foot board as the pedal
pad is moved to the edge of the board. Fits 2000-01 FLST.
VT No. Item
23-0360 With Pedal Pad
23-1030 Without Pedal Pad
240
2000-06 Shifter Kit
BIG TWIN
22-0522
22-1009
22-0523
Chrome Kit
Chrome Brake and Shifter Kits. Order footpeg, left and right
side separately.
VT No. Type
22-0523 Shift
22-0522 Brake 22-1006
Shift Hardware. 10-2561
VT No. OEM Item
5-Speed FXST Replica Forward Shifter Kit is complete with
22-0523 Kit Chrome
17-9300 6057 Nylon Washer all hardware necessary for installation on 1981-up 5-speed Big
14-0913 11191 O-Ring Twins. Use in conjunction with our FXST Replica Controls listed
21-2074 33660-90B Shift Lever on the opposite page, as all kits place pegs in a forward posi-
21-0111 33683-00 Lever Bracket
10-2561 33708-94 Bracket Bushing
tion. Foot rests on peg while shifting for added comfort. This is
21-2039 33719-79A Shifter Rod Kit an exact stock replacement in chrome for 1984-up FXST. Kit
21-2063 34564-90A Shift Lever Arm includes chrome heavy duty shifter bracket, inner lever,
21-0317 34611-65 Shifter Rubber
shifter lever, rod, rubber shift peg and foot ITS
Miscellaneous Brake.
peg. WIN1K978
V-Tin
23-0053 Brake Pedal Wave Washer
S ce
VT No. Fits STILL
EY’RE
23-0718 Rubber Rear Brake Hose
23-1797 Chrome Rear Brake Pedal Mount TH
22-1004 1981-99 FXR AY...
23-1824 Front Brake Shoe Linings
EST W
23-1343 Black Replica Rear Brake Backing Plate 22-1006 1985-89 FXST THE B
22-1009 1990-99 FXST
Extension Bracket Sets

2000-06 3” Extension Kit moves
controls 3” forward for FXST-FXSTD-
FXSTC-FXSTB.
VT No. 27-0566
2” Forward Control Extension

Bracket will relocate the stock or
custom forward controls 2” forward on
1936-99 Big Twin models. Note that
hoses and linkage will also have to be
extended. VT No. 27-0594
241
Rear Brake
23-0108 23-3025
Components
23-3013
23-3012
23-3025
23-3010
23-3017
23-9173 28-0505 28-2005

23-3009
23-9171 23-0421
21-1986
13-9166 13-9170 12-0971
Brake Plunger Assemblies.

VT No. OEM Fits
23-3010 42448-82A 1983-E87 FXST, Black 12-0976 23-1758
42522-82 Plunger and Clevis
23-3025 42522-87 Late1987-99. FXST Clevis, Chrome 23-1720
23-3017 42448-82A 1984-Early87 FXST-FXWG
1982-Early87 FXST-FXWG-FXR
23-0016 42523-82 Brake Pedal Assembly
28-0548 23-0405 23-1209
23-0030 42437-81 Rear Brake Clevis
12-0054 Pin
23-9173 42437-87 1982-E86 FXR
23-0039 42437-81 198E-E87 FXR
23-9171 42448-87 1987-94 FXR 1984-99 FXST-FXWG Brake Pedal and Components.
23-0421 42269-30 Clevis Pins, washer and cotter pin VT No. OEM Years Item
21-1986 42269-70 Clevis Pins washer and cotter pin 23-0108 42515-81 1983-99 Chrome Pedal
23-3025 42522-87 Late1987-99 Push Rod Plunger
23-3012 42507-86 1986-Early87 Chrome Pedal Mount Plate
23-3013 42507-82 1983-85 Chrome Pedal Mount Plate
23-3009 42507-89A 1990-99 Chrome Pedal Mount
28-0505 40922-79 1983-Early87 Boot
28-2005 40922-87 Late1987-up Boot
13-9166 40920-82 1982-Early87 Spring
13-9170 40920-87 Late1987-up Spring
12-0971 40918-82 1982-Early87 Boot Retainer Ring, 10 pack
12-0976 40918-87A Late1987-up Boot Retainer Ring, 10 pack
23-1758 44126-82 1983-Early87 Washer, Return, 5 pack
23-3035 23-1720 42374-82A 1983-Early87 Master Cylinder Repair Kit
23-3036 28-0548 42532-82 1983-up Pedal Pad
Rear Brake Master Cylinder Reservoir features a die-cast 23-0405 All Clevis Pin Kit
aluminum construction with ribbed accents and the sight glass 23-1209 1990-99 Pedal Plate
installed. 23-3030
VT No. Finish Master Cylinder Mount Bracket bolts to
23-3035 Chrome 23-3012, 23-3013 plates.
23-3036 Black VT No. 23-3030
OEM Cross Reference Now Available online 24/7.
Check at
VTwinMfg.com
242
23-9196 23-9161 23-0778
Rear Master Cylinder
Remote Reservoir Body and
BIG TWIN
Related Hardware for use with
23-0650 slave cylinders.
23-9266 23-0954
23-0458 23-0013 23-0874 23-2009
23-9318 23-9220 VT No. # OEM Item 24-0601

16-0063 A 10038A Clamp
23-2009 B 41800-81A Chrome Reservoir Body
23-1720 C 42374-82A Master Cylinder Kit
23-9316 24-0601 D 42376-77A Cover, Chrome
15-0203 E 42455-80 Gasket, each
23-0875 23-1702 23-1703 23-9196 F 42470-82B Master Cylinder Complete
37-8821 G 42534-82 Screw
23-2303 H 45154-84 Brake Line, FXST
40-0119 J 63573-82 Hose, 25 feet, ⁵⁄₁₆” inner diameter
Complete Remote Mount Master Cylinders. Rear Brake Master Cylinder Res-
VT No. OEM Fits Item ervoir features a die-cast aluminum
23-9196 42470-82B 1982-86 Complete, Chrome construction with ribbed accents and
23-9161 42446-82B 1982-86 Complete, Natural Finish the sight glass installed.
23-0778 42446-87A 1987-99 FXST, FXR Chrome VT No. Finish
23-0650 42468-87D 1987-99 FLST-FLSTF Chrome 23-3035 Chrome
23-9266 41755-86 1986-91 FLT Chrome 23-3036 Black
23-0954 41755-92A 1992-94 FLT Black
23-0458 41755-99 2000-05 FXST & FLST 1999-04 Chrome Billet Master Cylinder
FLT Black Reservoir replaces original plastic unit
23-0013 41775-04 Chrome 2006-17 FXST, FLST on 1982-up replacing 41800-81A.
2005-07 FLT VT No. 23-3029
23-0874 41708-08 2008-14 FLT Chrome 23-3003 23-3004
23-9318 1991-05 FXD
23-9220 42474-90A 1991-05 FXDG Complete
23-0875 42474-06 2006-07 FXDG, Chrome 23-3003 23-3004 23-0878
23-1702 41755-95 1995-96 FLT Chrome
23-1703 41755-97 1997-98 FLT Chrome
Chrome Billet Master Cylinders feature Wagner or Kelsey

Hayes style mount holes ⁵⁄₈” bore.
1987-92 Big Twin
VT No. OEM Type
1987-92 Master Cylinder for Big Twins.
23-3003 Kelsey Hayes Inline
VT No. # OEM Item
23-3004 Wagner Offset
12-0418 A 6366 Washer
23-0878 Rebuild Kit
12-0417 B 7855 Nut
17-0904 C 37503-41 Lock Tab
23-3005 23-3028
12-0976 D 40903-87 Retaining Ring
12-0987 DD 40918-87 Retaining Ring, Large
23-0860
13-9170 E 40920-87 Spring
23-1988
28-2005 F 40922-87 Rubber Boot
14-0568 G 41731-88 Banjo Seal
23-0612 H 41747-82A Banjo Bolt
23-9177 I 42382-87 Master Cylinder Piston 23-0859
23-0778 J 42446-87A Master Cylinder Complete Chrome Rear Master Cylinder Assembly. Billet assembly
23-9201 L 42452-87 Body Repair Kit is available in ⁵⁄₈” or ³⁄₄” bore sizes. Features 2¹⁄₄” spacing
23-0006 23-0007 between mounting bolts, ¹⁄₈” NPT brake line fitting, milled
body design and measures 3¹⁄₂” long x 1¹⁄₄” wide and 3” tall.
VT No. Size
23-3028 ⁵⁄₈” Complete Assembly
Old School Master Cylinder is 9/16” bore for single caliper 23-3005 ³⁄₄” Complete Assembly
use. Custom applications. 23-0860 ⁵⁄₈” Rebuild Kit
Chrome Black 23-0859 ³⁄₄” Rebuild Kit
23-0006 23-0007 23-1988 Fitting 243
Master Cylinder 23-9177 23-9201
Rebuild
23-3020 23-1716
23-1718
23-1720
23-3021
23-1714 23-1717
23-2010
23-1715
23-2011 23-0863
23-0857
28-2002 Rear Master Cylinder Rebuilds

VT No. OEM Fits
23-1718 41762-58A 1958-79 Big Twin
23-1717 42374-77B 1979-84 FL, 80-85 FLT
23-1720 42374-82A 1983-85 FX 4-speed
Handlebar Master Cylinder Rebuild Kits. Each kit contains
1984-86 FXST-FLST
parts necessary for complete rebuild.
23-2010 42374-86A 1986-91 FLT
23-2011 42382-82A 1982-E87 All FXR
23-3020 45006-87 1987-95 ¹¹⁄₁₆” Bore
23-9177 42382-87A Late1987-up FXR-FXST
23-1716 45063-82 1982-85 ³⁄₄” Bore
1992-07 FLT Piston Assembly
23-3021 45072-87 1985-95 All ⁵⁄₈” Bore
23-9201 42452-87 Late1987-99 FXST, Body Rebuild
23-1714 45006-96 1996-03 ⁹⁄₁₆” Bore
23-0863 42932-08 2008-up Touring
23-1715 45072-96 1996-03 ¹¹⁄₁₆” Bore Late Plunger Springs act as brake
23-0857 42862-06A 2008-17 Dual Disc pedal return springs on rear mounted
28-2002 45042-82 Fluid Level Window 1982-95 master cylinders, zinc.
VT No. OEM Model
13-9165 40920-79 1979-84 FLT
13-9166 40920-82 1982-86 FXWG-FXST
13-9170 40920-87 1987-up FXST-FLST-Sportster
37-9042 515 Cotter ¹⁄₁₆ x ³⁄₄
37-9043 6220W Washer ¹⁄₄ x ⁷⁄₁₆ x ¹⁄₃₂
Top Gasket
15-0202
15-0203 15-0248 15-0242

15-0188 15-0204 15-0242 Rear Master Cylinder Cover Gaskets are sold each.
Front Master Cylinder Top Gaskets VT No. OEM Year Type
VT No. OEM Year 15-0202 41766-58 1958-78 Master Cylinder
15-0188 45012-72 1972-81 15-0203 42455-80 1980-up Master Cylinder
15-0204 45012-82 1982-84 Reservoir
15-0248 42455-82 1982-E87 Reservoir 15-0540
15-0242 45005-85 1985-95
15-0250 45005-96 1996-05 15-0250 15-0242 45005-85 1985-95 Master Cylinder
15-0540 42455-99 2000-up Reservoir
Stainless Steel Master Cylinder Top Screws, 25 pack.

VT No. OEM Years Type
37-8947 2628 1972-81 Front Master Cylinder Top,
Countersunk
37-8821 42534-82 1982-up Reservoir Cover
244
42-0316
Master Cylinder
Cover
BIG TWIN
42-0526
42-0014 42-0094
23-9187 24-0629 23-0794
Chrome Rear Master Cylinder Cover.

VT No. Fits
42-0316 1979-84 FLH, 1986-99 FLST
42-0526* 1982-94 FXR 23-0779 23-0782 24-0604
42-0014* 1982-94 FXR
42-0094 1982-86 FXR
*Note: Remote reservoir cover.
24-1279 23-0969 26-0179

Front Master Cylinder Cover.
VT No. OEM Years Finish
37-8969 37-8968 37-8970 23-9187 45004-85 1985-95 Smooth
Chrome Brake Caliper Inserts are easily installed with double 24-0629 Eagle Spirit
face tape supplied. Sold each. 23-0794 VT 1985-95
VT No. Dia Fits Type 23-0779* 45004-96 1996-05
37-8968 1.80” 1987-99 Hayes Rear 23-0782 Billet Smooth 1996-05
24-0604 45004-96 1996-05
37-8969 1.47” 1984-99 Front
24-1279 45078-96 1996-05
1982-E87 Girling Rear
23-0969 — 2008-up FLT Brake
37-8970 1.40” 1977-83 Dual Disc Front 26-0179 46424-05A 2005-07 FLT,
1972-84 Banana Rear 2006-14 FXST
1977-81 Rear *Note: Includes top, gasket, view plug and screws.
23-0768 23-0770 42-0973
23-0968 23-0781 24-0927

23-9190
Milled
23-0781 Billet Milled 1996-05
With Gasket
24-0927 1985-95 Front
Rear Master Cylinder Chrome Covers. *Note: Includes top, gasket, view plug and screws.
VT No. Fits
23-4502 23-4505
23-0768 1999-04 FLT, 2000-05 FXST
23-0770 1999-04 FLT
42-0973 2005-07 FLT, 2006-up FXST
23-9190 1982-96
23-0968 2008-up Rear, FLT
Rear GMA Billet Aluminum Brake Calipers are machined from billet
aluminum and clear anodized. Feature dual pistons which are internal-
ly connected, brake pads and brackets, when provided. Brake calipers 23-4518 23-4524
include spacers and hardware necessary for installation. Hoses and 23-9255
discs not included.
VT No. GMA Fits
23-4502 R10 Rigid Frames to fit 10” disc.
Use ⁵⁄₈” bore master cylinder
23-4505 201ST 1984-86 FXST-FXWG Kit.
Use stock type master cylinder
23-1792 402STC As Above Chrome Rear GMA 11.5” Rotor is cast iron with aluminum
23-4518 400DG 1992-99 FXDG. Use stock type master cylinder center. Note: Rotor should not be polished or cleaned.
23-9255 402STM 2000-05 FXST 4 piston. Use stock type Rear discs are two piece design non-floating.
master cylinder VT No. Fits Mt. Bolts
Components 23-9938 1992-99 FXST-FXR 4 Piston 37-9237
23-4521 PA4 GMA Caliper Piston, pair fits 23-4518, 23-9255
23-4509 PA1 Caliper Piston, pair, fits 23-4502, 23-4507
23-4520 PA2 GMA Caliper Piston, pair, fits 23-4506, 23-4505
23-4510 RB1 Caliper O-Ring Seal Kit fits 23-4502, 23-4507,
23-4506, 23-4505
23-4522 RB-4 Caliper O-Ring Seal Kit fits 23-4518, 23-9255
23-4512 A-Pad SBS Brake Pad Set fits Calipers: 23-4502, 23-4507
23-4514 B-Pad SBS Brake Pad Set fits Calipers: 23-4506, 23-4505
245
Chrome Rear 23-1091 2000-06 Caliper Kits include
integral bracket.
Caliper Kit
23-1089 23-1090
Rear Caliper Kit includes complete chrome caliper, chrome
caliper bracket, 11¹⁄₂” stainless drilled polished brake rotor and
23-1093
chrome disc mount bolts. 23-1102
VT No. Year Model
23-1089 1990-99 FXD
23-1090 1987-94 FXR
1986-99 Dura Rear
Caliper Kit features
chrome billet caliper 23-1103
and bracket. 11.5” Chrome Rear Caliper Kit fits 1987-up Softail models and
razor rotor included. includes complete chrome replica 4-piston caliper assembly
VT No. 23-0655 with one piece integral bracket, pads and polished stainless
steel drilled rotor with chrome mount bolts.
VT No. Year Model
23-1091 2000-05 Softail
23-0281 23-1093 1987-99 Softail
23-1102 2000-05 FXD-WG
23-1103 2006-07 FXD-WG
Colony Chrome Rear Caliper Bolts for
2000-up.
VT No. Year
2081-3 2000-07 FLST, FXST, FXD
2755-4 2008-up FLST, FXST, 08-17 FXD
Chrome Billet Caliper Kit

23-0884 for 1986-99 Softail includes
chrome caliper and polished
rear rotor.
VT No. Style
23-0281 Razor
23-0884 Caliper Seal Kit Installed 23-0853 Caliper
Billet Caliper Kit features 4 piston design for 1987-99 Softail
models. Order rotor separately.
VT No. 23-0853
Wyatt Gatling Polished Stainless Steel Rotor Set features a Chrome Caliper Kit includes caliper, bracket and polished
18-spoke style. Fits 1984-1999 FXST, 1986-1999 FLST, 1984- stainless steel 11.5” rotor with bolts. Fits 2000-05 FXST,
1999 XL, 1991-1994 FXD, 1984-1994 FXR FLST.
VT No. 23-0049 VT No. 23-0282
246
22-0357 22-0358 Rigid Rear Caliper Kit
22-0381
BIG TWIN
22-0382
22-0359 22-0368
11.5” Chrome Caliper Kit fits Rigid frames. Kit includes pol-
22-0350 22-0351 ished 11.5” rotor, bolts, chrome 4-piston caliper complete with
integral bracket and weld on frame tab.
VT No. Side Fits Axle
22-0381 Left Big Twin 1”
22-0382 Right Big Twin 1”
22-0351 22-0352
22-0762
22-0353
Right Side Billet Rear Caliper Kit fits 1986-99 Softail with
integral side mount tail lamp/caliper bracket. Order curved tail
lamp separately.
Rear Caliper Kits include GMA Caliper with bracket and either pol- VT No. 22-0762
ished or standard 11¹⁄₂” stainless steel disc with mount bolts.
Polished Standard Year Model
22-0357 22-0350 1984-86 FXST-FXWG
22-0358 22-0351 1987-99 FXST 22-0373
22-0359 22-0352 1985-94 FXR
22-0353 1992-99 FXDG
22-0368 2000-05 FXST
Left Side Chrome Forged Billet Rear
Caliper Bracket fit 1” axles. Includes
spacer for ³⁄₄” axle applications. Fits
1986-99 FXST, FLST.
VT No. 23-0792
Edart Caliper-Disc Set includes 2 piston chrome billet caliper,

polished rotor/sprocket combination with 49 teeth for 1” or ³⁄₄”
axle. Order bolt kit separately.
VT No. Item
22-0373 Kit
23-0785 Disc-Sprocket
23-0799 Rebuild
44-0856 Adapter
247
Big Twin Rear Caliper 1982-up
23-4533 23-4531 23-3055 23-9221
23-9060
23-9063
23-0582 23-0551
23-9064 23-0951
23-0552
Rear Caliper Bracket replaces stock unit to accept stock cali-
per. Available in chrome or black.
Chrome OEM Model Year
23-4533 44205-87 FXR 1987-94
44207-82 FXST 1982-Early87
FX 1983-84
23-4531 44309-98 Dynaglide 1990-99
23-9060 42048-06 FXST 2006-07
23-9063 42048-08 FXST 2008-up
23-9064 42002-08 FXD 2008-up
Caliper Bracket 23-9062

22-0765 23-9061
Chrome Rear Calipers are completely assembled with piston
and seals but less mount brackets for exact stock replacement.
Calipers OEM Model
23-3055 44050-82A 1982-86, FXWG, FLHS, FXR, FLST, FXST
22-0764 23-9221 44050-87 1987-99 FXST
23-0582 — 1987-99 Softail with integral bracket
23-0551 44016-00C 2000-05 FXST, 2000-07 FLST
22-0765
23-0552 44017-00 2000-05 FXD
23-0951 44017-06 2006-07 FXD-FXDWG
23-9061 42047-06 2006-07 FXST
23-9062 42047-08 2008-17 FXD-FXDWG, 2008-up FXST
23-0795
Chrome Rear Rotor Covers. Bolts on for a
secure installation. Fits 1986-99 FXST-FLST.
VT No. 42-0337
Black Rear Caliper

23-3056 44050-87 1987-99 FXST
23-0787 23-0787 23-0125 44039-86 Bolt Kit for Above
23-9038 44076-86A 1986-99 FLT
23-3056
1986-99 Softail Rear Caliper Kit includes curved license
plate mount and spacer to fit ³⁄₄” or 1” axle.
VT No. Item Side Includes
22-0764 Kit Right 4 Piston Caliper
22-0765 Kit Left 4 Piston Caliper
23-0795 Bracket Right Bracket Only
23-0865 23-0866
23-0796 Bracket Left Bracket Only
23-0787 Bracket Right Side Bracket Only Edart Billet Caliper fits front and rear 1986-99 Softail. Order
Rubber Bumper for rear brake caliper, each. rear bracket separately.
VT No. 28-0718 VT No. Item Type
23-0865 Caliper 4 Piston
23-0866 Bracket
248
2000-07 Chrome
Front Caliper Kit
BIG TWIN
23-0554 23-0529
Chrome Front Caliper and Rotor Kit fits 2000-07 models. Kit 23-0580 23-0581
includes a complete chrome replica 4-piston caliper assembly
with pads, polished stainless steel drilled rotor and chrome
mounting bolts.
VT No. Model
23-0561 FXST
23-0562 FXD
37-8968 37-8969 37-8970

Chrome Brake Caliper Inserts are easily installed with double
face tape supplied. Sold each.
VT No. Dia Fits Type
37-8968 1.80” 1987-99 Hayes Rear
37-8969 1.47” 1984-99 Front
37-8970 1.40” 1982-Early87 Girling Rear 2000-07 Front Caliper are 4 piston type including all internal
42-0848 2000-07 Left Chrome components. 23-0554 features smooth face.
Front Caliper Cover. VT No. OEM Side Finish
VT No. Model 23-0554 44395-00 Left Chrome
42-0844 FXD 23-0529 44046-00 Left Black
42-0848 FXST, FXDWG 23-0580 44023-00 Right Chrome
42-0844 23-0581 Set Right and Left Chrome
Caliper fits 2008-up FXST-FLST
Front Chrome Rotor Caliper Mount Bolt VT No. Finish Fits Side
Kit fits all 2000-up Big Twin models. 23-0499 Chrome 2008-10 Left
VT No. Brand Fits 23-1107 Black 2011-up Left
37-0816 Dura 2000-07 23-1108 Chrome 2011-up
37-0816 2080-4 Colony 2000-07
2754-12 Colony 2008-up FXST, FLST 23-0499
Caliper Thread Chart

OEM Calipers
Front: All 1984-2002 Single Disc Calipers
3/8-24 banjo bolt
Rear: All Late1987-2002 Big Twin, TC/B, XL
3/8-24 banjo bolt
Front: All 1984-2002 Dual Disc Calipers
3/8-24 banjo bolt
Rear: 1982-Early 87 FXR, XL; 84-Early 87 FXST; 83-86 FXWG
3/8-24 banjo bolt
Front: 1977-83 FX, FXWG, FXR, XL
3/8-24 Inverted Flare
Banana Caliper 1973-83 FL, FX, XL
1/8 NPT
OEM-Handlebar Master Cylinders
11/16” bore, 1985-95 Dual Disc Models
7/16”-24 banjo bolt
5/8” bore, 1985-95 Single Disc Models
3/8-24 banjo bolt
3/4” bore,1982-84 Dual Disc Models
3/8-24 banjo bolt
11/16” Bore, 1982-2002 Dual Disc Models
3/8-24 banjo bolt
1972-81 FL, FX, XL
1/8 NPT
249
1984-99 Front
Caliper Kit
23-0541
23-1105
23-3061 23-3082
23-0541 1984-06 Front Calipers include all internal components.
Installed VT No. OEM Side
111/2” 1984-99 Chrome Left Side Front Caliper Kit includes 23-3061 44046-84C Left, Black
polished stainless steel Dura rotor with bolts and chrome cali- 23-3082 Left, Chrome
per half with brake pads and hardware.
VT No. Fits Fork
23-0541 1984-99 FXST-FLST-FXDWG 41mm
23-0563 1984-99 FXD-FXR 39mm
23-0649
23-0279
23-0884
Front Chrome Billet Calipers feature 4-piston design with
23-0649
mount brackets included. Fits 1984-99 FXST.
Installed
VT No. Item
1984-99 Chrome Caliper Kit features 4 piston chrome caliper
23-0279 Caliper Kit
and polished stainless steel Dura rotor.
23-0023 Caliper
VT No. 23-0649
23-0884 Rebuild
1984-99 FX Chrome Front Disc
Caliper available as right or left
assemblies or set for 11” rotors.
Includes all internal components
and pads.
VT No. Item Fits Edart Billet Front Caliper includes bracket for 1984-99
23-2226 Pair, Right and Left FX Softail and XL models and is one piece design.
23-3085 Right only FX-FL VT No. Piston Rebuild
23-3082 Left only FX-FL 23-1105 2 23-0864
1984-99 Front Caliper Piston and Seal Front Chrome Disc Brake Caliper Mount
Kit. Bolt Kit fits all Big Twin models with allen bolts.
VT No. 23-2279 VT No. Fits
37-0800 1993-99 All
37-0800 37-8822 1983-92 All
4
Piston Chrome 1984-99 Left Side 4 37-0817 1988-96 FXSTS Springer
Piston Caliper features 2000- 37-0818 1997-up FLSTS Springer
up styling to retro fit 1984-99
models. Lower Leg Caliper Bushing fits in lower leg where
VT No. 23-0555 caliper attaches. Sold each. Fits 1984-up FXST.
24-0331
Replaces 46020-84. VT No. 24-0331
23-1567 Front Caliper Right Adapter

Bracket allows the use of 13” floating
rotor on models listed by raising stock
caliper. Brackets are a clear anodized
finish. Fits 1986-99 FLST, FXST,
1991-99 FXD.
VT No. 23-1567
250
Caliper Rebuild
23-2012 1987-99 Complete Rear Caliper
BIG TWIN
28-2133 Rebuild Kit includes all necessary
hardware, piston and seal kit for a com-
plete caliper overhaul. Fits FXST, FXR,
FLT and FXD
23-1572
VT No. 23-2012
1984-99 Front Caliper Piston and Seal Kit.
1984-99 Front Calipers and Components.
VT No. 23-2279
VT No. # OEM Item 23-1982
37-8822 A 855 Screw
Kit B 3517 Screw 23-1981
1983-92 C 6019 Washer 23-0533 23-0812
37-0800 As Above 1993-99
23-2279 D 44020-83 Piston Rebuild Kit 23-2275
12-0977 E 44021-83 Retainer Caliper Seal Kits contain seal and dust boot for year listed.
23-2275 F&H 44047-83 Dust Boot with Seal VT No. OEM Front
23-3060 S,D — Caliper Right, Chrome Half 23-2275 44047-83 1984-99 All FX-FLT
23-1982 — Caliper Anchor, FXSTS, 1993-06 44022-83
23-1981 — Caliper Strap, FXSTS, 1993-06 23-0533 44315-00 2000-07 All
23-3083 G 44077-88D Right, 1988-99 FXSTS, Black Complete 23-0812 2008-14 FLT, FXST, FLST, 2008-17 FXD
23-1982 — Caliper Anchor, FXSTS, 1993-06 VT No. OEM Rear
23-1981 — Caliper Strap, FXSTS, 1993-06 23-2277 44208-82 1983-Early87 FX-FXWG-FXST-FXR
23-1572 — Strap Kit 23-0558 — Piston Ring for Above
23-0455 44030-88 FXSTS 1988-up Caliper Brkt Bushing 23-9022 44045-87 Late1987-99 All FXST-FXR-XL
23-3061 R 44046-84C Left,1984-99 FLT-FXR-FXRS- 1986-99 All FLT
FXRT-FLSTF-FLSTN, 23-0594 — Piston Ring for Above
1991-99 FXDWG-FXDG (Black) 23-0533 44315-00 2000-07 All
23-1731 J 44048-83 Bleeder, 10 pack 23-0812 2008-14 FLT, FXST, FLST, 2008-17 FXD
23-2274 K 44053-83 Guide Pin Kit for 1984-92 Big Twin, 23-0884 — Seal Kit for V-Twin Billet 4 Piston Caliper
1993-up FXSTS 23-1999
23-9226 K 44053-92 Guide Pin Kit for 1993-99
All Big Twin except FXSTS
28-2133 L 44054-83 Boot, each
14-0563 M 44059-83 O-Ring
23-0810 23-0810
23-2308 N 44072-92A Bracket, Left
Caliper Piston and Seal Kits.
23-2306 O 44061-83 Spring Clip
VT No. OEM Front
23-2307 P 44062-83 Retaining Pad
23-0532 44313-00 2000-07 FXST, FLST, FLT, FXD, XL
23-0512 Q 44063-83 Pad Set with B
23-0810 44313-08 2008-14 FXST, FLST, 2008-17 FXD
23-9238 VT No. OEM Rear
23-2281 44208-82 1982-Early87 FXR, 1984-Early 87 FXST
1985-86 FXWG (Piston Only)
23-1999 43946-86 Late87-99 FXST-FXR, 1987-99 FLT
23-9245 Includes seal kit
23-0147
23-0137 23-0532 44313-00 2000-07 FXST, FLST, FLT, FXD, XL
Vibration Clips fit as replacement to dampen pad rattles. 23-0811 2008-14 FXST, FLST, 2008-17 FXD
VT No. OEM Year Type *Note: 1980-85 FLT have Dual Piston Caliper.
23-9238 41665-82 1982-99 FXR Chrome Caliper Mount Bolt Kits mount
1983-99 FLHS-FXSB-FXWG through caliper to bracket.
23-9245 43960-86 1987-99 FXST-FXR
23-0137 43959-86 1987-99 FLT VT No. OEM Type Fits
23-0147 44337-00 2000-up Front or Rear All Models 23-0140 44039-86 6 Point 1987-99 FXST-FLST, 1991-99 FXD
Rear Chrome
23-1731 23-0110 37-8265 23-0125 44039-86 6 Point Black, As Above
37-0266 Allen 2000-05 FXST-FXD Rear
1982-E87 Rear Brake Caliper

Bleeder Screws available in 10 pack. Guide Pin Kit for Big Twin mod-
VT No. OEM Size Fits els. Replaces 44212-82A.
23-1731 44146-77 ³⁄₈ - 24 1977-86, Late1987-89 VT No. Type
Front or Rear Calipers 23-0693 37-0508 23-0693 Complete Chrome
37-8265 Chrome ³⁄₈ - 24 As Above, 5 pack 37-0508 Screw Set
23-0110 Oversize Repair Kit Front or Rear Brake Pad Pin Kit for 2000-up
*Note: Fits bleeders and grease fittings FXST, FLST, FLT, 2000-17 FXD and 2000-03 XL.
VT No. 23-0673
251
Disc Brake Pad Set
Disc Brake Pads available in Dura or SBS brand. Dura Brake Disc, Dura Brake Disc Veloprene for excellent stopping on all types of disc brake
discs. Dura Brake Disc replacement pads are a soft compound designed to be compatible to all types of brake discs. SBS brand is available in
Sintered, Ceramic or Carbon Tech compounds. Sintered Metal Pads provides maximum stopping power but can never be used in calipers that were
originally equipped with non-sintered pads. Works best with stainless steel disc brake discs. Ceramic Pads are for general purpose use on carbon
steel brake discs and can be used on calipers originally equipped with sintered metal brake pads. Carbon Tech Pads for use in all stock or aftermarket
calipers. Works well with stainless steel or cast iron brake discs. Order anti rattle clips separately. Veloprene is relatively soft compound compared to
ceramic or metallic but heat resistant and less abrasive to rotors, including polished stainless types.
F J
A D E
23-1001 G H 23-0894
W Y 23-0889
23-1059 23-1060
Fits OEM Dura Dura Dura Dura Dura SBS SBS SBS #
Soft Ceramic Semi Veloprene Sintered Sintered Ceramic Tech
Metallic Tech
1986-99 FLT 43957-86A 23-2282 23-0991 — 23-0627 23-0956 23-1778 — 23-1777 D
1987-99 FXR, FXST, FLST, FXD 44213-87 23-9163 23-0992 23-0642 23-0620 23-0957 23-1780 — 23-1779 E
2000-05 FXST, FLST 44082-00 23-0526 23-0993 23-0643 23-0546 23-0958 23-4559 23-1781 23-1782 F
2000-07 FLT, FXD
2006-07 FXST, FLST 46721-06 23-1794 23-0917 — — 23-0959 23-4562 — — W
2008-17 FXST, FLST, FXD 42298-08 — 23-0994 23-0893 23-0886 23-1001 23-4563 — — A
2018-up FXST, FLST 41300197 — — — 23-1061 23-1062 — — —
2008-up FLT 41852-08 23-1015 23-0995 23-0894 23-0889 — — — — G
2009-13 Trike 83911-09B — — — 23-0973 23-0980 — — —
1984-99 FLT, FXST, FLST, FXR, 44063-83 23-0512 23-0996 23-0647 23-0625 23-0960 23-1784 23-1762 23-1785 J
FXD
2000-07 FLT, FXST, FLST, FXD 44082-00 23-0526 23-0993 23-0643 23-0546 23-0961 23-4561 23-4560 23-1782 F
2008-10 FXST, FLST, 2008-11 FXD 44082-08 23-0887 23-0997 — 23-0888 23-0862 23-4564 — — Y
2008-up FLT 41854-08 — 23-0998 23-0894 23-0890 23-0909 — — — H
2011-14 FXST-FLST, 2012-up FXD 46363-11 — 23-1056 23-1057 23-1058 — — — — Y
2015-up FXST-FLST 41300102 — 23-1059 — 23-1060 — — — —
Q
Z
L
P
N
M 23-0941
R
Disc Pad Sets for Aftermarket Custom Calipers
Fits: Dura SBS SBS Dura Photo
Soft Ceramic Carbon Ceramic S
Tech
Edart 23-0879 — — — X
Brembo Style 23-0788 — — — V
GMA Model “A” 23-0591 23-4550 23-4512 — L
GMA Model “B” 23-0592 23-4554 23-4514 — M T
GMA Model “F” 23-9174* 23-4553* 23-9169* 23-9878 N U
GMA Model “M” — — — 23-9874* Q
GMA (Inside-Out) — — — 23-0941 Z
Jaybrake Small 2-piston 23-9174* 23-4553 23-9169* — N
Jaybrake 2 piston ADC/ADCS 23-0592 23-4554 23-4514 — M
Jaybrake 6 piston A6 L/R — 23-4557 — — T
Performance Machine 162 x 2 23-9036 23-4552 — — P
Performance Machine 125 x 2 23-9174* 23-4553 — — N V
Performance Machine 125 x4S 23-9174* 23-4553 — 23-9945 N
Performance Machine 125 x 4SL 23-9174* 23-4553 — 23-9945 N
Performance Machine 125 x 6 — 23-4558 — 23-9945 U
Performance Machine 137 x 6 — 23-4558 — — U
Performance Machine 124 x 4HR — 23-4555 — — R
X
Performance Machine 137 x 4 — 23-4555 — — R
Performance Machine 125 x 4R 23-9037 23-4556 — 23-9946 S
*Note: Set of Four
252
Stainless Brake Disc
23-0260 23-0341 23-0362 Drilled Stainless Brake Discs
BIG TWIN
feature rustless finish for
appearance and long service
life, in Russell or Dura Rotor
brand. Available in standard
or polished finish. Russell
High Performance and Dura
Stainless Steel Discs are com-
patible with all disc pads includ-
ing sintered metal and OEM.
23-0357 23-0354 23-0468 23-0333
23-0361 23-0469 23-0356 23-0467
23-9040 23-9206 23-9048 23-0343
23-0908
Dura Rotor Russell
OEM Dia Bolt Kit Fits
REAR
23-0260 23-0354 — — 40939-86A 11.5” 9807-10 1986-99 FLT
23-0341 23-0333 23-9044 23-0318 41791-79 11.5” 8791-10 1981-92 FXST-FXR Cast or Wire
Cast or Wire
23-0362 23-0361 23-9045 23-9926 41789-92 11.5” 9807-10 1993-99 FXST-FXR-FXDB Cast or Wire
Cast or Wire
23-0468 23-0469 — — 41789-92 11.5” 9807-10 1993-99 FXST-FXR-FXD
Cast or Wire
23-0357 23-0387 23-9050 23-9051 41797-00 11.5” 9807-10 Wire 2000-up FXST-FLST-FXD, 2000-07 FLT Cast or Wire
9818-5 Cast
23-1043 — — — 41791-10 11.5” 9807-10 2000-up FXST-FLST, 2000-17 FXD 2000-07 FLT
9818-5
FRONT
23-0343 23-0334 23-9040 23-0319 44136-84 11.5” 8793-5 Cast 1984-91 FX-FXST-FXSTS-FLST-FLT
8794-10 Wire Cast or Wire Wheel
23-9206 23-0368 23-9040 23-0319 44136-92 11.5” 8793-5 Cast 1992-99 FX-FXST-FXSTS-FLST-FLT
23-0467 — — — 44136-92 11.5 8793-5 Cast 1992-99 FXST-FXSTS-FLST-FLT
23-0356 23-0379 23-9048 23-9049 44156-00 11.5” 8793-5 Cast 2000-13 FXD-FXST, 2000-13 FLT
8794-10 Wire Cast or Wire Wheel Left Side Brake Disc
— 23-0906 — — 41500094 11.8” Included 2014-up FLT Dual Disc Set, fits with Enforcer or Impeller
wheels on FLT models.
23-6764 23-6765 — — 41500022 300M 8793-5 Cast 2015-up FXST, 2014-up XL Left Side
8794-10 Wire Note: 300M
23-0907 — — — 44553-06A 11.8” 8793-5 Cast 2006-17 FXD for left side, 2015-up FXST, 2015-up FLST
8794-10 Wire
23-0908 — — — 42040-06 11.8” 8793-5 Cast 2006-17 FXD for left side, 2015-up FXST
8794-10 Wire
23-9002 23-9003 — — 41500022 11.8” 8793-5 Cast 2015-up FXST, FLST
8794-10 Wire 2006-17 FXD
253
Floating Brake Rotor
23-0583 11.5” Polished Stainless
Steel Floating Brake Rotor.
Order bolt set separately.
Rear
VT No. Fits
23-0583 1979-99
23-0599 2000-up
Front
23-0632 1984-95
23-0595 23-0596 1996-99
23-0595 2000-14
Floating Center Detail
Stainless Brake Rotor

23-0907 23-1000 23-0585
11.8" Front Brake Disc requires bolt on application, as the

original. OEM No: 42040-06. Diameter measures to be 11.8".
Must order mount bolts separately. Fits 2006-2017 FXD, 2015- 23-0468
UP FXST, FLST, 2008-13 FLT.
Stainless Steel Polished Replica Brake Discs feature full stainless construction with
23-1000 23-0907 precision ground finish and slot style pattern.
VT No. Year Fits Finish
Note: 2000-up discs have 2.25” inner diameter center hole, 23-0467 1992-99 Front Stainless
1979-99 discs have 2.062” inner diameter center hole.
23-0468 1992-99 Rear Polish
23-0584 2000-14 Front Polish
23-0775 2000-14 Front Stainless
23-0585 2000-14 Rear Polish
Steel Brake Rotor

23-0300 Steel Brake Rotor feature fine finish ground surface. Available with or without holes in steel
with zinc finish unless noted as stainless. Exactly interchangeable with stock discs. Order
bolt set separately.
Drilled Plain OEM Dia Bolt Kit Fits Type

Front
23-0370 — 44210-79 10” 8792-5 1979-83 FLT Steel
23-0371 — 44210-79 10” 8792-5 1979-83 FLT Stainless
23-0300 23-0301 44136-84 11.5” 8793-5 Cast 1984-99 FX FXST-FXSTS-FLST-FLT Zinc
44136-92 8794-10 Wire Cast or Wire Wheel
23-3774 — 44136-00 11.5” 8793-5 Cast 2000-14 FXD, FLT, 2000-13 FLT Stainless Steel
8794-10 Wire Cast or wire wheel right side brake disc
— — 44260-00 11.5” 8793-5 Cast 2000-14 FXSTS-FLSTS Stainless Steel
8794-10 Wire Cast or wire wheel right side brake disc
23-0535 — 44156-00 11.5” 8793-5 Cast 2000-14 FXD-FXST-FLT Polished Stainless Steel
8794-10 Wire Cast or wire wheel left side brake disc
Rear
23-0307 23-0308 41791-79 11.5” 8791-10 1981-92 FXST-FXR Cast or Wire Steel
23-0297 23-0313 40909-81A 12” 8791-10 1981-84 FLH Cast or Wire .390 thick. Steel
254
11.5” Stainless Brake Rotor
Wyatt Gatling Polished Spoke Rotor.
BIG TWIN
Number of spokes as noted.
20 Spoke 18 Spoke Type Year
23-0149 23-0679 Front 1984-99
— 23-0678 Rear 1979-99
23-0151 23-1517 Front 2000-up
— 23-1518 Rear 2000-up
— 23-0895 Rear 1979-93
11.5” Polished Stainless Steel Razor Brake Disc features full

stainless construction polished to high gloss. Order screw set
23-0694 23-3774 23-0534
separately.
Rear, 11.5”
VT No. Year Side Wheel Screw Set Holes
23-0386 1993-99 Right Wire 9807-10 Countersunk
23-0820 As Above Unpolished
23-0388 1979-99 Right Wire 8791-10 Tapered
23-0598 23-0535
23-0392 2000-up Right Wire 9807-10 Countersunk
Cast 9818-5 Countersunk
Front, 11.5”
23-0376 1984-99 Left Cast 8793-5 Countersunk
Wire 8794-10 Countersunk
23-0391 2000-14 Left Cast 8793-5 Countersunk
Dura 2000-up Stainless Rotors with vented swirl slots. Wire 8794-10 Countersunk
VT No. OEM Type/Side Model Finish Year
23-0694 44156-00 Front, Left FXD, FXST Polished 2000-14
23-3774 44136-00 Front, Right FXD, FXST Polished 2000-14
23-0534 44156-00 Front, Left FXD, FXST Steel 2000-14
23-0598 41797-00 Rear FXD, FXST Polished 2000-up
23-0535 Front, Left FXD, FXST Polished 2000-14
23-0357 41797-00 Rear FXD, FXST Polished 2000-up
X Polished Stainless Rotors.
VT No. Year Type
23-1520 1984-99 Rear 10” Polished Razor Brake Discs.
23-1521 2000-14 Front VT No. Fits Style
23-1522 2000-up Rear 23-0847 Rear, Left 1973-80
23-1532 2015-up Front 23-0848 Rear, Left, 23-0848 has chrome center. 1973-80
11.5”
23-1537 2008-up FLT Front
23-1500
11.5”
23-1512
Dura Polished Stainless Brake Discs.
VT No. Year Type Bolts Wheel
23-1512 1984-99 Front 8791-10 Wire
8793-5 Cast 11.5” Dura Polished Brake Disc. *Note: Chrome center por-
23-1513 1984-99 Rear 9807-10 Wire tion.
23-1514 2000-14 Front 8794-10 Wire VT No. Year Type Style Bolts
8793-5 Cast 23-1500* 1984-99 Front Hole 8794-10
23-1515 2000-up Rear 9807-10 Wire 23-1501 2000-up Rear Slot 9807-10
9818-5 Cast 23-1516 1986-99 Rear Razor 9807-10
Order Bolts Separately.
Note: 2000-up brake discs have 2.25” inner diameter cen-
ter hole, 1979-99 brake discs have 2.062” inner diameter
center hole.
255
11.5” Stainless Brake Rotor
Fits front and rear!
23-0651 23-1527 23-0659 23-0660
23-0687 23-0653
11.5” Edart Rotor in polished stainless features universal Fits Right and Left!
design to fit 1984-up front and 1984-2014 rear applications.
VT No. Type Qty VT No. Type Qty
Edart Universal Brake Rotor utilizes center ring and washers as noted.
Fits Year Ring Washers
23-0651 Swirl Each 23-0659 Spoke Each Front 1984-99 Yes Yes
23-1527 Spike Each 23-0660 10 Spoke Each Front 2000-up No Yes
23-0687 Spoked Each 23-0945 Adapter Kit Rear 1984-99 Yes No
23-0653 Pirate Each Rear 2000-14 No No
5-Spoke Polished Brake Rotor

23-0832 23-0833 23-0834
VT No. Year Type
23-0639 2000-14 Front
23-0639 23-0835 23-0837
5-Spoke Polished
by Dura Rotor.
VT No. Year Type
23-1508 1984-99 Front
23-1509 1984-99 Rear
23-1510 2000-14 Front
23-1511 2000-14 Rear Stainless Brake Rotor with skull engraving.
23-1508 VT No. Year Type Finish
23-0832 1984-99 Front Stainless Steel
23-0833 1984-99 Front Polished
23-0834 1984-99 Rear Polished
23-0835 1984-99 Rear Stainless Steel
23-0836 2000-14 Rear Stainless Steel
23-0837 2000-14 Rear Polished Stainless Steel
256
Brake Rotor Bolt
Chrome Brake Disc Chrome Rear Brake Rotor Bolts.
BIG TWIN
Bolts. See listing for
9807-10 37-9236 Wheel Type Year VT No. #
9818-5 applications.
FXD
# Thread
A 3/8 x 16 x1
Cast 1997-up 9818-5 E
B 5/16 x 18 x 7/8
Cast 1997-up 9818-5T E
C 5/16 x 18 x 7/8 Spoke 1992-up 9807-10 D
D 3/8 x 16 x 1 FXST-FLST-FXR
9632-5 8794-10 E 3/8 x 16 x 1 Cast 1979-91 37-9236 A
37-9237 Cast 1979-91 9632-5 A
Spoke 1993-96 9807-10 D
Spoke 1993-up 37-9237 D
Spoke 1997-up 9818-5 E
Spoke 1997-up 9818-5T E
8793-5 2341-5 8793-5
Chrome Front Disc Brake Rotor Bolts.
Wheel Type Disc Year VT No. #
FXST-FXDWG
Spoke Single 1984-up 8794-10 B
Cast Single/Dual 1984-up 8793-5 C
44-0554 44-0528 44-0511 FXR-FXD
Brake Rotor Bolt Spacers will adapt 1973-up FX-FL rear hubs Spoke/Cast Single/Dual 2006-up 2341-5 C
to accept brake rotors for front fork use. VT No. 44-0528 fits Spoke/Cast Single/Dual 1984-up 8793-5 C
dual disc type 1980-83 FXWG type.
VT No. Outer Inner
44-0528 ³⁄₈ ⁵⁄₁₆
44-0511 ⁷⁄₁₆ ³⁄₈
44-0554 ⁷⁄₁₆ ⁵⁄₁₆
Brake Rotor-Pulley Spacers

19-0136
19-0412 20-0144
20-0343 20-0145 20-0151
Rear Pulley Rotor Spacer has 2¹⁄₄” I.D. and is ideal to get belt
pulleys or chain sprockets in line. These spacers can also be
1980-99
used as a disc spacer. Spacer can be machined down to the
Pulley Spacers provide offset when required, with ⁷⁄₁₆” bolt
next size under without having to worry about the spigot align-
holes. Each disc measures 2¹⁄₁₆” inner diameter with 4⁵⁄₁₆”
ment, when you machine the face of the spacer down to the
outer diameter For 1980-99.
desired thickness on spacers with spigot. Spacers are drilled
for use with ⁷⁄₁₆" bolts and designed to be used with 2000-up VT No. Thick Material
type wheel hubs. 23-0320* ¹⁄₁₆” Steel
2000-up 19-0128
19-0452
³⁄₁₆”
³⁄₁₆”
Steel
Billet
Steel Aluminum Thickness 19-0413 1
/4” Steel
Alloy 19-2001 ⁵⁄₈” Billet
20-0346 ¹⁄₁₆” 20-0130 ¹⁄₂” Polished Stainless
20-0347 20-0150 ¹⁄₈” (.125”)
20-0129 ¹¹⁄₁₆” Polished Stainless
20-0343 20-0149 .200”
20-0344 20-0136 ¹⁄₄”,(.250”) 20-0132 1” Polished Stainless
20-0345 .300” 20-0134 1³⁄₈” Polished Stainless
20-0151 ⁵⁄₁₆”,(.3125”) *Note: Use when installing flat brake rotor on 1973-75 Big
20-0148 20-0153 ¹⁄₂” ,(.500”) Twin
20-0143 ³⁄₄” ,(.750”)
20-0144 ⁷⁄₈”,(.875”) 2000-up Pulley Bolt Kits.
20-3088 1” VT No. Type Thread
20-0145 1” 37-0990 Allen
20-3090 1.370” 37-0031 Hex
20-0146 1¹⁄₄”,(1.25”) 37-9236 Allen ³⁄₈” x 16 x 1
20-0147 1¹⁄₂”,(1.5”)
257
Brake Hose
Front Brake Hose is of stock
type rubber construction and D.
O. T. approved. 45” length. Fits
1984-99 FXST. Replaces 45112- Rear Steel Brake Tubes are zinc plated. Front fits between
84A. VT No. 23-0742 master cylinder and junction. Order rubber hose for final con-
nection to rear cylinder or caliper separately. Fits 1984-Early
87 FXST and Late1984-85 FXWG. Replaces OEM# 45154-
84. VT No. 23-2303
14" Upper Brake Hose fits 1978 FXS and 1979 XLX
VT No. 23-0721
Banjo Bolt
Brake Banjo Seal Washers feature built in Chrome Banjo Bolt Kits for use with universal or
O-Rings. stock lines, front and rear, washers included. The VT
14-0048 No. 37-8979 is to be used when a master cylinder or
VT No. OEM Type caliper uses a ³⁄₈-24 banjo bolt and the line has a 12mm hole
14-0567 41733-88 ⁷⁄₈”, 12mm fits handlebar cylinders instead of 10mm.
1984-00, single disc VT No. OEM Line Size/Item
14-0568 41731-88 ³⁄₈”, 10mm fits 1982-00 Dual Disc 23-0612 41747-82A 10mm ³⁄₈-24
Brake Calipers 23-0613 41731-82 10mm Washers
14-0578 41731-01 Fits 2001-up Master Cylinder and 23-0614 41739-84 12mm ⁷⁄₁₆-24
Brake Calipers 23-0615 45583-83 12mm Washers
14-0048 41751-06A Fits 2006-up (Copper) 37-8979 Special Kit 12mm ³⁄₈-24
Chrome Banjo Bolts include seal washers. 14-0568 41731-88 10mm Washer with O-Ring
VT No. Size MM Style 14-0567 41733-88 12mm Washer with O-Ring
2190-3 ³⁄₈ - 24 10 Dome 23-0842 41750-06A 2006-up
2191-3 ³⁄₈ - 24 10 Allen
Banjo Bolt by Russell accepts brake light
2192-3 ⁷⁄₁₆ - 24 12 Dome
2190-3 switch and eliminates the need for junction
2193-3 ⁷⁄₁₆ - 24 12 Allen
block. Replaces the standard ³⁄₈ x 24 bolt. Sold
23-0882 2004-up XL 10 Hex
each. VT No. 23-0746
23-0883 2004-up XL 12 Hex
Chrome Billet Brake Line Tee has 2
Allen Button Head Banjo Bolts sold with washers. inverted flare ³⁄₈ - 24 threaded holes, ¹⁄₈”
Fit ³⁄₈ -24 10 mm. National Pipe Thread center hole.
VT No. 37-8517 VT No. 23-3769
Billet Aluminum Brake Tee. Front Chrome Brake Line
23-9228
VT No. Type Clamp fits under triple tree
to secure stainless brake
23-9227 Front 3/8-24 inverted flare in all 3 holes B line. ¹⁄₄ - 20 mount hole.
23-9228 Rear 3/8-24inverted flare
A VT No. Type
in 2 holes and 1/8 NPT in center hole 23-0675 A
Universal Straight Chrome Union with bracket. 23-0686 B
VT No. Thread
23-0635 ¹⁄₈ NPT
23-0688 ³⁄₈-24
23-0570 23-0571 23-0572

Chrome Steel Brake Line Tees with ⁵⁄₁₆” mounting hole.
VT No. Type
32-1629
32-0770 23-0570 Center hole inverted flare ³⁄₈”- 24 UNF,
32-0443
side tubes ³⁄₈”- 24 UNF
23-0571 Center hole ¹⁄₈” - 27 NPT,side tubes
Hydraulic Brake Flag Switch features heavy duty contacts ³⁄₈” - 24 UNF
and quality brass terminals. 23-0572 Center hole and side tubes ¹⁄₈” - 27 NPT
VT No. Fits
32-0443 1948-03 FLT, FXST, 1986-03 FLST, 1991-03 FXD
32-0770 2004-up FLT, FXST, FLST, 2004-07 FXD
32-1629 2008-up FXD
258
Universal Brake Fitting & Bolt
10mm Russell Street Legal Universal
BIG TWIN
Brake Lines. Build it yourself line assem-
blies ready for adapter fittings. Preassembled
with high performance #3 stainless braided hose with rugged 23-4051
Veloprene coated. inner and crimp-on chrome plated female 23-4054 23-4279 23-4244
swivel hose ends. Clear coated for abrasion resistance. Meets 23-4047
23-4050
the guidelines of the D.O.T. MVSS-106 requirements and are 23-4053 23-4052
50-state legal. Compatible with all brake fluids.
23-4298
VT No. Length VT No. Length VT No. Length
23-8352 4” 23-8100 28” 23-8202 50”
23-8002 6” 23-8110 30” 23-8170 52” 23-4293 23-4283
23-4396
23-8010 9” 23-8120 32” 23-8180 54”
23-8020 12” 23-8130 34” 23-8272 56”
23-8030 15” 23-8342 36” 23-8282 58”
23-8362 16” 23-8140 38” 23-8229 60” 23-4281
23-8040 17” 23-8242 40” 23-8332 62” 23-4282 23-4380
23-4284
23-8212 18” 23-8150 42” 23-8312 64”
23-8050 19” 23-8252 43” 23-8322 66”
Chrome Adapter Fittings see listing for application. *Note: Most
23-8060 21” 23-8262 44” 23-5833 68” Common Use.
23-8070 23” 23-8192 45” 23-5835 72” VT No. Fitting Type Adapts To:
23-8080 25” 23-8372 46” 23-5836 74” 23-4047 10mm Banjo, straight 23-0746
23-8090 26” 23-8160 47” 23-5840 80” 23-4050 10mm Banjo, 35°
10mm Banjo End Dual Disc Upper Hose fits 23-4055 10mm Banjo, 45°
1982-up style master cylinders for single or dual 23-4051 10mm Banjo, 90°
disc application. Hose has nut with inverted flare 23-4052 ⁷⁄₁₆” Banjo, straight
23-8926 at opposite end. 24” is the length. 23-4053 ⁷⁄₁₆” Banjo, 35°
VT No. 23-8926 23-4056 ⁷⁄₁₆” Banjo, 45°
23-4054 ⁷⁄₁₆” Banjo, 90°
Cable Clip with ⁵⁄₁₆” hole snaps on fork tubes to 23-4057 12mm Banjo, Straight
hold cables and brake hoses. 23-4058 12mm Banjo, 35°
VT No. MM 23-4059 12mm Banjo, 90°
24-1023 39 23-4244 ¹⁄₈” Male NPT, straight
23-4279 ¹⁄₈” Male NPT, 90°
24-0497 41
23-4293 ¹⁄₈” Male NPT, 45°
24-1024 49 23-4298 Male Tee
31-0315 31-0316 41mm Push On Fork Tube 23-6033 Flare Union 23-6033
Clamps. 23-6034 ³⁄₈ - 24 Banjo Bolt
VT No. Style 23-6035 ⁷⁄₁₆ - 24 Banjo Bolt
31-0315 Smooth 23-6040 10mm x 1.25 Banjo Bolt
31-0316 Groove 23-6041 12mm x 1.25 Banjo Bolt
23-6042 10mm x 1.25 Double Banjo Bolt
23-0746 ³⁄₈ x 24 Brake Switch Banjo Bolt
23-6037 35° Rear Banjo, 10 mm
23-6038 90° Short Rear Banjo, 10mm
Russell ProSwivel™ Brake Hoses are designed for single 23-4396 ³⁄₈ -24 Male Inverted Flare, straight, 2 pack
disc applications from stock to full custom rebuilds. Feature 23-4380 ³⁄₈ -24 Male Inverted Flare, 90° and 120°
a unique design that allows the hose end to rotate 360° *Junction block to master cylinder
eliminating the hassle of aligning the connection at the cali- 23-4281 ³⁄₈ -24 Male Inverted Flare, 45°
per. Installation is easy, simply route the hose utilizing stock
mounting locations, attach the banjo at the master cylinder, *Rear Calipers 23-4304
rotate the caliper banjo to correct angle requires. Tighten, 23-4282 ³⁄₈ -24 Male Inverted Flare, 90°, Short
bleed and your installation is complete. These hoses are *Junction Block to Front Caliper
factory assembled requiring no shop assembly in length from 23-4283 ³⁄₈ -24 Male Inverted Flare, 90°, Long
23-4307
40” to 54” , with various end configurations for master cylin- *Junction Block to Front Caliper
ders. 23-4284 ³⁄₈ -24 Male Inverted Flare, 150°
VT No. Master Cylinder Caliper Overall *Forward Controls
Description 23-4306 Front Wide Glide Junction Block
23-9300 Straight ⁷⁄₁₆” ID Banjo x 90° 40” 23-4305
23-4307 Front Narrow Glide Junction Block
23-9301 Straight ⁷⁄₁₆” ID Banjo x 90° 42”
23-9302 Straight ⁷⁄₁₆” ID Banjo x 90° 44” 23-4305 90° Long Forward Control Banjo, 10mm
23-9304 Straight ⁷⁄₁₆” ID Banjo x 90° 48” 23-4303 35° Short Rear Brake Banjo, 10mm
23-4304 90° Short Rear Brake Banjo, 10mm 23-4303
23-9305 Straight ⁷⁄₁₆” ID Banjo x 90° 40”
23-9306 35° ⁷⁄₁₆” ID Banjo x 90° 44”
23-9307 35° ⁷⁄₁₆” ID Banjo x 90° 46”
23-9308 35° ⁷⁄₁₆” ID Banjo x 90° 48” 23-4304
23-9309 90° ⁷⁄₁₆” ID Banjo x 90° 50”
23-9310 90° ⁷⁄₁₆” ID Banjo x 90° 52”
23-9311 90° ⁷⁄₁₆” ID Banjo x 90° 54”
23-9312 90° ³⁄₈” ID Banjo x 90° 48”
23-9313 90° ³⁄₈” ID Banjo x 90° 50”
23-9314 90° ³⁄₈” ID Banjo x 90° 52” 259
Brake Line
23-8745
Softails 23-8822
*Note: DOT approved.
Year Model Front Type Rear Type
1986-87 FLST — 9 23-8814 1
1987-up FLST-FLSTC 23-8745* 9 23-8822 or
23-8839*
As Above +2 Ext 23-8987 9 23-8822
As Above +4 Ext — 9 23-8822 or
23-8839*
As Above +6 Ext 23-8989 9 23-8822 or 23-8771
2000-03 FLSTC 23-8745* 9 23-8838
Heritage Classic
1990-99 FLSTF-FLSTN 23-8745* 9 23-8839*
2000-06 FLSTF Fat Boy 23-8745* 9 23-8838
1997-99 FLSTS Heritage 23-8757* — 5
Springer 23-8839
2000-06 FLSTS 23-8757* 23-8838*
1984-86 FXST Standard 23-8728* 9 23-8814
1987 FXST-FXSTC 23-8728* 9 23-8814
1987-98 FXST-FXSTC 23-8728* 9 — 23-8774
(manufactured after 23-8837* —
2/1/87)
As Above +2 Ext 23-8946 9 23-8837*
As Above +4 Ext 23-8947 9 23-8837*
As Above +6 Ext 23-8948 9 23-8837*
1999-2003 FXST Standard 23-8771 23-8837*
1999-2003 FXST Standard 23-8771 23-8838*
2000-up FXSTC Custom 23-8728* 9 23-8838*
1988-89 FXSTC Springer 23-8947 9 23-8837* 23-8731
1996-99 FXSTS Springer 23-8760 29 23-8837*
2000-03 FXSTS Springer 23-8760 29 23-8838*
1995-97 FXSTSB Bad Boy 23-8761 30 23-8837*
1999 FXSTB Night Train 23-8770 23-8837*
1999-2003 FXSTB Night Train 23-8770 23-8838*
1999-2003 FXSTD Deuce 23-8774 23-8838*
FL Touring/Dresser Series
1984 FLT-FLHT 23-8731* 26, 45 — 5 23-8844
1985 FLT-FLHT 23-8731 26, 45 — 5
1986-91 FLT-FLHT 23-8731* 26, 45 23-8847* 36
1992-96 FLT-FLHT 23-8731* 26, 45 — 36
23-8842*
1997-03 FLT-FLHT 23-8731* 26, 45 23-8844* 5
1994-96 FLHR-FLHRI 23-8756* 23-8842*
1997-2007 FLHR-FLHRI 23-8756* 23-8844*
As Above +2 Ext 23-8997 23-8844*
As Above +4 Ext 23-8998 23-8844* 23-8756
As Above +6 Ext 23-8999 23-8844*
Upper Lines Only
23-8986 1984-02 FLT-FLH 29” 25 Upper Line Only
10mm
260
Brake Line
BIG TWIN
Fittings Shown
for Reference
Only
Dyna Series
1991 FXDB Sturgis 23-8751* 9 23-8836* 46
1992 FXDB Daytona 23-8749* 26, 28, 45 23-8836* 46
23-8728 1992 FXDC Custom 23-8749* 26, 28, 45 23-8836* 46
2005 FXDC Custom — 23-8833
2006-07 FXDCI Custom 23-8769 —
1992-99 FXDL Low Rider 23-8749* 26, 28, 45 23-8836* 46
2000-05 FXDL Low Rider 23-8744* 26, 28, 45 23-8833*
2006-07 FXDL Low Rider 23-8768 —
1993-99 FXDWG Wide Glide 23-8728* 9 23-8836* 46
2000-05 FXDWG Wide Glide 23-8728* 9 23-8833
23-8833 2006-07 FXDWG Wide Glide 23-8766 —
1994-99 FXDS Convertible 23-8749 26, 28, 45 23-8836*
2000-03 FXDS Convertible 23-8749 26, 28, 45 23-8833*
1995-99 FXD Super Glide — 23-8836* 46
As Above +4” Ext 23-8983 30 23-8836 46
2000-05 FXD Super Glide — 23-8833*
2006-07 FXDI Super Glide — 23-8769 —
1999-05 FXDX Super Glide Sport 23-8836* 23-8833*
2000-06 FXSTD 23-8774 —
Upper Line Only
VT No. Year/Model Length Type
23-8980 1992-02 FXDL-FXDS 26¹⁄₄” 10mm 25 Upper Line Only
FX Series
23-8846 Year Model Front Type Rear Type
1984-85 FXE-FXEF 23-8722* 9 23-8810 2
23-8749 1984-87 FXS-FXRS-FXRDG-FXRC 23-8722* 9 23-8813* 3
1984-85 FXSB — 23-8810 2
1984-86 FXWG — 23-8810 2
As Above +2” Ext 23-8953 9 23-8810 2
As Above +4” Ext 23-8954 9 23-8810 2
As Above +6” Ext — 9 23-8810 2
1985-86 FXRS Sport 23-8760* 12, 28, 45 23-8813 3
1987-93 FXRS Sport — 26, 45 23-8846* 46
1987-94 FXLR — 9 23-8846* 46
1988-92 FXRT Sport 23-8747* 26, 28, 45 23-8846* 46
1988-92 FXRT Sport Glide 23-8747* 9 23-8846* 46
1988-94 FXR, FXRS, FXRC 23-8746* 26, 28, 45 23-8846* 46
1989-93 FXRS Convertible 23-8749* 26, 28, 45 23-8846* 46
1999 FXR2, FXR3 23-8775* 23-8848*
23-8980 1999 FXR4 23-8776* 23-8848*
Lower Lines Only
23-8956 1984-87 FXRT-FXRD -3” 12 Lower Line Only
23-8958 1984-87 FXRT-FXRD -4” 45 Lower Line Only
*Note: D.O.T. approved.
261
49mm Fork 49mm Fork Assembly includes
chrome upper and lower trees
with stock tubes and chrome
24-0924 sliders. Fits 1971-99 FX.
24-0925
VT No. 24-1319
24-1153 Complete 49mm Fork Assemblies include

assembled right and left fork slider assembly, top
24-1417 triple tree, bottom triple tree and axle. FXDWG
assemblies are stock replacement for 2006-up
but can be installed on 2001-05 models which
will require use of 2006-up front fender, brake
caliper and wheel.
49mm Fork Components fit 2006-up FXD forks. VT No. Sliders 24-1203
VT No. Item 24-1153 Polish
24-0924 Top Triple Tree 2006-07 VT No. Item 24-1157 Chrome
24-1417 Top Triple Tree 2008-up 2339-5 Axle Spacer
24-0925 Chrome Lower Tree 24-0197 Top Nut Kit
24-0926 Bearing Adjuster Nut 44-0699 Axle
24-0953 Lower Dirt Guard 24-0818 Stem Cover
2272-5 Clamp Screw 24-1202
24-1080 Slide Bushing
24-1049
Chrome Fork Boot Set fits 49mm
FXD-FXDWG models. Easy to 49mm Fork Components fit 2006-up FXDWG forks.
install without disassembly of fork. VT No. Item VT No. Item
VT No. 24-1213 24-0948 Right Hand Slide Assembly 24-0953 Lower Dirt Guard
24-0970 Right and Left Set 44-0691 Axle
24-1202 Top Tree (chrome) 2006 24-1049 Chrome Tube
24-1217 Lower Tree Assembly
Chrome Fork Boots fit 49mm FXD 24-1403 Lower Tree 2008-up 2337-5 Axle Spacer
style forks. 24-0926 Bearing Adjuster Nut 24-0197 Top Nut Set
VT No. 24-0499 24-1080 Slider Bushing 24-0818 Stem Cover
2272-5 Clamp Screw
50-0265 Fork Tube and Slider Assembly available in right
and left pairs, completely assembled. Units have
hard chrome fork tubes, and either polished or
50-0266 chrome lower sliders, with springs and all internal
components installed.
50-0267 50-0882 VT No. Fits Slider
24-0949 49mm
24-1283 2008-up FXCWC (Right and Left) Chrome
24-0948 2006-17 FXDWG (Right) Polish
24-0949 2006-17 FXDWG (Left) Polish
Steel Front Fender fits 2006-up with 49mm forks. 24-0970 2006-17 FXDWG Set Chrome
VT No. Model Wheel 24-1033 2006-17 FXDWG Set Polish
50-0266 FXD 19” Billet Tree Sets fit 49mm
50-0265 FXDWG 21” 24-1411 FXDWG forks.
50-0267 FXCW 19” VT No. 24-1411
50-0882 FXDF 16”
49mm Fork Brace fits 2006-
up FXD, will not fit FXDWG. Chrome Lower Triple Trees fits FXCWC
VT No. 24-0983 24-1231 models. Fits 2000-up FXST.
VT No. 24-1231
Kwik-Klip attaches brake line or speedometer cable to
fork leg inner diameter is 49 mm.
VT No. 24-1024 Trees to fit 1980-99 FXST-FXWG when using
24-1029
49mm Fork Clamp will hold clutch cable position. 49mm fork tubes.
VT No. 31-1010 VT No. Type
49 mm Grooved Billet Fork Clamps. 24-1029 Lower
VT No. 31-0323 24-1202 Upper
Chrome 49mm Lower Leg Set

fits 2002-up V-Rod. Replaces
46526-02A. 24-1083 24-1056
VT No. 24-1198 Fork Rebuild Kit.
VT No. Model
24-1083 FXD
262 24-1056 FLT
24-2006
41mm 11.5”
Single Disc Fork
BIG TWIN
Top
View
Assembly
L
FXST Style Single Disc Fork/Wheel and Caliper Assembly
features chrome trees with 1” stem. Available with polished
or chrome lower sliders without reflector boss, and hard
chrome fork tubes and internals installed. Legs to accept a
left side single disc caliper, 11.5” brake disc and hard chrome
fork tubes with internals assembled. Axle, neck, bearings, 24-0598
top cone, stem nut, pinch bolts, and bearing dust covers are FXST Style Single Disc Fork Assembly features chrome
included. Stock length is 31” overall. Kit also includes a 21” trees with 1” stem, polished or chromed lower slider legs, to
all chrome assembled wheel with bearings, drilled 11.5” brake
accept 11.5” caliper and brake disc, hard chrome fork tubes,
disc with chrome screws and chrome disc caliper complete
axle, neck bearings, top cone and stem nut, pinch bolts and
with mount hardware and pads. Fits 1948-99 FX-FL.
VT No. Caliper bearing dust covers. Fork is 31” overall length (L) and legs
24-2044 Polish are assembled. Single disc unit accepts 11.5” brake disc and
24-2006 Chrome left side caliper.
VT No. Fits Year
Chrome Lower Tree Cover covers area on 24-9950 Big Twin Single Complete 1980-99
lower tree below headlamp. 24-2004 As Above with Chrome Lower Sliders 1980-99
VT No. 31-9991 24-0598 Complete with Axle, Chrome Trees 2000-06
Phatt Fork Assembly

and Lower Legs
Chrome Billet Phantom 41mm Fork
Assembly
Chrome Billet Phatt Fork Kit features • Features hidden top bolt and lower clamp
smooth top tree, massive fork tube covers, assembly screws.
• Kits include billet lower legs and axle to fit
hidden fork stops, smooth billet lower legs
11.5” brake rotor and caliper, 1984-99 type.
and hidden axle. Trees are stock FXST rake. Stock 3° Rake 5° Rake Length
Available in stock (31”) to +12” extended 24-5550 Stock (31”)
length. Use 111/2” single disc and caliper 24-5570 24-8507 +6”
assembly. Order tree set and leg set sep- VT No. Length
arate as two numbers. Tree set includes 31-0351 Brake Line Clamp
upper covers and leg set includes lower
covers in correct length for tube application.
Note: Parts listed on this page are not com-
patible with any other trees or legs in this
catalog.
VT No. Length
For Stock Rake Trees
Leg Assembly* 24-6008
24-9008 +8”
24-9010 +10” Extended Billet Fork Slider.
24-9012 +12” 24-6004 +4"
*Note: No Hidden Fork Stops. 24-6006 +6"
VT No. Length 24-6008 +8"
For Rake Trees
Leg Assembly* Lower Smooth Polished Legs feature
24-9017 +4” smooth design without reflector boss, for
24-9018 +6” dual disc 10” applications. Internals not
24-9019 +8” included. Fits 1980-83 FXWG.
24-9020 +10” VT No. 24-9934
24-9021 +12”
*Note: No Hidden Fork Stops.
263
Replica Fork Assembly
24-1525
24-1532
41mm Glide Fork Assemblies include forged chrome replica triple trees,
hard chrome tubes on stock length forks, chrome tubes on overstock
length and polished or chrome lower legs with all internals installed less
hardware. Stock overall length is 31”. Order installation kit separately.
(A) FXWG, Dual 10” (B) FXST, Single 11.5” (C) FXST, Dual, 11.5”
Polish Chrome Polish Chrome Polish Chrome
Stock 24-1500 24-1525 24-1532 24-1501 24-1546
2” 24-1503 24-1526 24-1509 24-1533 24-1515 24-1540
4” 24-1504 24-1527 24-1510 24-1534 24-1516 24-1541
6” 24-1505 24-1528 24-1535 24-1517 24-1542
8” 24-1512 24-1537 24-1518 24-1543
10” 24-1519 24-1544
12” 24-1514 24-1539 24-1520 24-1545
24-0833
24-0774
Fork Installation Kit includes two bearings, dust covers,
top nut axle and related hardware.
VT No. Type Year Model
24-0774 2 Disc 1984-99 FXST 24-9944
24-0833 1 Disc 1986-99 FLST 24-9976
24-0772 2 Disc 1984-99 FLT
24-1158 2 Disc 2000-07 FLT
24-0773 2 Disc 1986-99 FLST
24-9978 Installed 24-0512
Glide Fork, FXSTD Style features all chrome components,

including axles and nuts. Bearings included.
VT No Year Model
24-9944 1990-99 Softail
24-9976 2000-06 FXSTD
“D”Style
24-0512 Standard Leg Assembly
2000-up Chrome
Deuce Triple Tree Set
includes upper and
Chrome Billet Style Fork Assembly features chrome lower tree.
machined triple tree set with “hidden” top nut. Chrome leg VT No. 24-0666
assembly is smooth style to accept 2000-up left side caliper
and a FXSTD style fender. One inch neck bearing and axle kit
included.
VT No. 24-9978
FXSTD Chrome Lower Triple Cover
Chrome “Fatty” Curved dresses up the unfinished underside
Riser Set features pull back of lower triple tree. Includes mounting
styling as on 2000-up mod- hardware. Replaces 66021-00.
els. Kit includes two piece VT No. 42-0080
cap set and risers with 5”
rise and 2” pull back and
¹⁄₂” x 13 internal threads. 2000-up FXSTD Chrome
Replaces 56033-00. Steel Front Fender replaces
VT No. 26-0539 59876-00.
VT No. 50-0200
50-0200
264
FXR 1982-94, FXD 1991-up Billet Leg
41mm Fork Assembly Assembly
BIG TWIN
FXST 11.5” Single Disc Style
Fork Assembly fits FXR 1982-94 41mm Billet Fork Assembly with
or 1991-up FXD Dynaglide mod- stock rake trees and 32” overall
els. Assembly is available with length. Fits 1984-99 calipers.
chrome triple trees, polished or VT No. Item
chrome lower legs without reflec- 24-1547 Fork
tor boss to accept a left side sin- 44-0891 Axle
gle disc 1984-99 type caliper and 24-1280 Legs
Single 111/2” brake disc. Hard chrome
Disc fork tubes with internals assem-
Style bled, axle, neck bearings, top
24-2005 cone, stem nut, pinch bolts and
bearing dust covers are included.
Stock unit is 31” overall length.
FXR units do not include provi-
sion for fork lock.
Complete Single 11.5” Disc Fork Assemblies.
VT No. Year/Model Slider
24-2005 1982-94 FXR Chrome
24-2008 1991-99 FXD Polished
24-2007 1991-99 FXD Chrome
24-9997* 2000-05 FXDWG Polished 41mm Narrow Glide will replace 39mm
*Note: Does not include axle assembly on FXD models. Use with
Complete Dual 11.5” Disc Fork Assemblies. original wheel and brake assembly from
24-9952 1982-94 FXR Polished 1984-03. Wheel not included.
24-9973 1982-94 FXR Chrome VT No. Item Type
24-2009 1991-05 FXD Polished 24-1275 Fork Assembly Dual
24-2010 1991-05 FXD Chrome 24-1276 Fork Assembly Single
Complete Single 11.5” Disc Fork Assembly and 21” Wheel Kits. 24-1280 Fork Sliders
Include a 21” all chrome assembled wheel with bearings, 52-0170 19” Wheel Single/Dual
drilled 11.5” brake disc with chrome screws and a chrome 52-0171 21” Wheel Single/Dual
single disc caliper complete with mount hardware and pads.
24-2017 1982-94 FXR Polished
24-2018 1982-94 FXR Chrome
24-2027 1991-05 FXD Polished
24-2028 1991-05 FXD Chrome
Dual Disc
Style
24-2016
FXWG 10” Style Dual Disc Fork Assembly fits 1982-94

FXR and is available with polished or chrome lower sliders
which are smooth at the reflector boss area, accepts dual
disc calipers, 10” brake disc, chrome trees, bearings, axle,
spacer and top nut. Hard chrome tubes with internals are
16” FL Wheel Shown on Billet Fork
assembled. Stock is 31” overall length. Units do not include
Assembly. Wheel has proper offset to fit all
provision for fork lock
Complete Dual 10” Disc Fork Assembly and 21” Wheel Kits 41mm forks which accept 1984-99 single
Include a 21” all chrome assembled wheel with bearings, two disc caliper. Order caliper, speedo drive and
drilled 10” brake discs with chrome screws and chrome cali- spacer separately.
per set complete with mounting hardware and pads. VT No. Item
24-2015 10” Dual FXR Polished 52-0696 16” Wheel
24-2016 10” Dual FXR Chrome 36-0803 Speedometer Drive, Left Side
44-0254 Spacer, Right Side
265
41mm Fork Assembly
11.5” Dual Rotor
11.5” Dual Disc Fork/Wheel Assembly includes complete fork assembly. Kit
also includes a 21” all chrome assembled wheel with bearings, 2 drilled steel 11.5”
brake rotor with corn screws, chrome style disc caliper set, speedometer drive and
adapter, complete with mount hardware and pads. Fits 1948-99 FX-FL.
VT No. Sliders
24-2038 Polished
24-2039 Chrome
11.5” Dual Disc Fork Assembly

11.5” Dual Disc Fork Assembly features FXST style components. Assembly includes
chrome triple trees and hard chrome fork tubes installed in polished or chrome, lower
sliders with all internals installed, which accept dual 11.5” brake discs and calipers.
Overall length is 31”. Kit includes axle, spacer, neck bearings, top cone. Order stem nut
and bearing dust covers separately. If a front wheel drive speedometer is not desired.
Order axle kit VT No. 44-0570 separately.
VT No. Fits Sliders
24-9949 Big Twin Complete Polish
24-9972 Big Twin Complete Chrome
52-0127 21” Wheel with Chrome Spokes —
52-0181 21” Wheel with Stainless Steel Spokes —
24-9948 Right and Left Slider Assembly Polish
24-0517 Right and Left Slider Assembly Chrome
36-0547 Speedometer Drive Adapter Kit
23-2226 Chrome Caliper Set
41mm 10” Dual Disc Fork Assembly

FXWG Style Dual Disc Fork/Wheel and Caliper
Assemblies to fit 1948-99 Big Twin FL-FX-FXWG
24-1525
Accepts Fork Only
features polished or chromed lower sliders without
reflector boss. Hard chrome fork tubes and internals
10” discs installed. Includes chrome trees with 1” diameter stem,
neck bearings, axle spacer and top nut. Stock length
is 31” overall. Kit also includes 21” all chrome assem-
24-2011 bled wheel with bearings, drilled 10” steel with chrome
screws, and choice of black or chrome dual disc cal-
ipers complete with pads. 24-9947 has smooth lower
legs.
FXWG Dual Disc Fork

Assembly Front Wheel
Speedo Drive Kit will
allow use of 2:1 ratio
speedo. Kit includes
axle, speedo drive and
adapter flange.
VT No. 36-0547
VT No. Item Caliper Sliders

24-2000 Kit Chrome Polished
Fork Assembly Kit fits 1973-84
24-2011 Kit Chrome Chrome
FL, 1980-83 FXWG.
Fork Assembly Only
VT No. 24-0776
24-0779 Fork Assembly Polish
24-1525 Fork Assembly Chrome
24-9947 Fork Assembly Polish
266
Fork for FLST 41mm
BIG TWIN
FLST Fork Assembly is 1986-99 Replica style featuring a chrome top tree, black lower stem with chrome
or polished lower sliders with hard chrome fork tubes and internals installed to accept 11.5” disc. Includes
neck bearings, top nut and axle kit. Unit accepts 5 piece chrome tin fork cover set 24-9959 for the authentic
look. Order fender, wheel, and tin set separately. Fits 1949-84 FLH, 1971-84 FXE and 1985-99 Softail mod-
els. Units are 31¹³⁄₁₆” long overall length from top tree to axle position.
VT No. Item Sliders Disc
24-9951 Fork Assembly Polish 1
24-0515 Fork Assembly Chrome 1 Fork Assembly for 2000-06 FLSTF,
24-2120 Fork Assembly Chrome 2 FLSTC models, with 32° frame rake. Kit
24-9959 Chrome Five Piece Cover Set includes fork assembly, triple trees with
52-0696 16” Wheel with chrome spokes bearings, dust shields and hardware.
50-1075 As Above without trim holes Available with chrome finish.
50-0764 Fat Kid Fender, pictured VT No. 24-0579
23-3061 Left side, black caliper
23-3082 Left side, chrome caliper
24-9951 24-9995 Right and Left Slider Assembly Polish
Note: All related parts are available separately.
Item VT No.
• 16” x 3 Wheel 52-0131
24-2136 24-2136 • Fender 50-0764
• Brake Discs (2) 23-0300
• Discs Bolts (2) 8794-10
• Gator Boots 28-0439
• Caliper Set 23-2226
• Speed Drive 36-0547
• Inner Tube (SV) 46-0115
Choice of Triple Trees:
VT No. Type Fits
24-0000 Softail —
24-0719 “D” —
24-0800 FLH Cowl
24-0829 Early Stainless Steel Covers
Big Twin
Dual Disc Fork Assembly accepts right and left 1984-88 style calipers to fit 11.5” discs. This
combination gives the ultimate in stopping power for 1948-84 FX-FL, 1986-99 FXST-FLST.
Overall length is 31”.The basic kit includes
• FXST or FLH Tree Set
• 24-0518 DD Leg Assembly
• 24-0776 Fork Install Kit
VT No. Tree Type
24-2136 FXST
24-0514* FLH
*Note: Use wheels 52-0848/52-0849
Fork Assembly for FLST

FLST Style Complete
24-2019 Installed
24-2019 Front End Assembly
Installed includes the complete
fork kit with the addition
of the five piece chrome
fork cover set, 7” head-
lamp and bracket, 16”
chrome wheel, speed-
ometer drive, chrome
24-2021 caliper, 11.5” drilled
disc and fat kid style or
FLST style fender.
VT No. Type Caliper Slider
Fat Kid Style
24-2019 Kit Black Polish
FLST Style
24-2021 Kit Black Polish
267
41mm Allen
Lower Stem Pinch Bolts available in
zinc hex or chrome allen. Chrome allen
set for FXWG-FXST includes headlight
41mm Narrow Glide will replace 39mm Hex
assembly on XL models. Use with orig- bracket screws.
inal wheel and brake assembly from
1984-03. Wheel not included. VT No. Type Fits Finish
VT No. Item Type 37-8835 Hexagon 1949-84 FL-FXWG-FXST Zinc
24-1275 Fork Assembly Dual Disc 9803-4 Hexagon 1949-86 FX, 1984-up FXST Chrome
24-1276 Fork Assembly Single Disc 9782-4 Allen FL-FXWG-FXST Chrome
52-0170 19” Wheel Single Disc 24-0004
24-0797
Dual Disc
52-0171 21” Wheel Single Disc
Dual Disc
Black Adjustable Fork Tree Kit is available for 1977-84 FLH,

FXWG 41mm fork legs. Showa type is 1977-up. Kits feature
swivel type plugs which are included. Lower tree has two
24-1275 positions for changing rake and fork lock tab. Kits use VT No.
28-0221 rubber bushing kit and VT No. 24-9910 top tree cover.
VT No. Fits
24-0797 1977-84 FLH 80-86 FXWG Complete, Black
Fork Tube and Slider Assembly available in right and left pairs, 24-0004 As Above without Tabs
completely assembled. Units have hard chrome fork tubes, and
either polished or chrome lower sliders, with springs and all inter- Front Fork Steering Head Lock
nal components installed.*Note: OE as noted. includes lock, keys and cover. Fits
VT No. Disc Fits Slider 1986-1992 FXR, 1988-1999 FXST.
49mm VT No. 24-1374
24-1283 Single 2008-up FXCWC (Right and Left)Chrome
24-0948 Single 2006-17 FXDWG (Right) Polish
24-0949 Single 2006-17 FXDWG (Left) Polish
24-0970 Single 2006-17 FXDWG Set Chrome
24-1033 Single 2006-17 FXDWG Set Polish
31-0140 31-9991
Chrome FXST Headlight Bracket mounts bottom style

mount head lamps on fork, also covers rough casting on lower
tree.
VT No. OEM Years
31-0140 67773-80 1980-85 FXST, 1980-86 FXWG
31-9991* 67773-80A 1986-93
*Note: Does not have holes for front mounting. Mounts by
headlight eye bolt only and acts as tree cover.
Lower Fork Stem Retaining Ring for
1986-up all models. Replaces 45611-86.
VT No. 12-0979
16-0272 16-0836
16-0051
Fork Stem Die Holder. Order die separately.

VT No. Item
16-0272 Holder Only
16-0051 Set
16-0836 Die Only 1” x 24 TPI
268
24-0838
24-1039
41mm Glide Tree
fits FLST models
BIG TWIN
24-0269
24-0341
1986-17 FLST Complete Cover Kit includes front panel, left

and right panel, upper slider covers, side trim strips. Mounting
hardware not included with chrome kit.
VT No. Finish
24-0838 Chrome
24-1039 Black
37-0571 Mounting Kit 24-0284
24-9958
24-0498
24-9959
Chrome Fork Cover Kits fit 1986-99 FLST in 3 piece tin set
or 5 piece which includes slider covers, stock length.
VT No. Item/Style
24-9958 3 Piece Set
24-9959 5 Piece Set 24-0304
24-1266 7 Piece Set
31-0404 Rear Panel Mount Brackets, pair
37-0571 Complete Fork Cover Mount Kit
9981-8 Chrome Screw Kit only
FLST Smooth Chrome
Fork Cover Kit. Three
piece kit includes front
panel and matching left FLST Fork Stem and Top fits 1986-17 models with 41mm fork tube
and right panels. Fits all use VT No. 24-9959 fork tin set. Note Sets 24-0304 and 24-0498 do
2000-08 FLST models. not accept covers or cowls.
VT No. 24-9047 VT No. OEM Item Year Finish
24-0270 45605-88 Lower Stem 1986-99 Black
24-9048 24-0273 W/o lock tab Lower Stem 1986-99 Black
24-0271 45605-88 Lower Stem 1986-99 Chrome
24-0301* 45605-88 Lower Stem 1986-99 Chrome
24-0399 W/o lock tab Lower Stem 1986-99 Chrome
24-0307 45605-00 Lower Stem 2000-17 Black
24-0306 45605-00 Lower Stem 2000-17 Chrome
24-9960 24-0263 45456-86 Upper 1986-17 Chrome
24-0269 — Set 1986-99 Chrome Top
Slider Covers fit 1986-17 FLST model forks. Stock length is Black Lower
6⁵⁄₈” overall. 24-0284 — Set 1986-99 Chrome
VT No. Finish 24-0304 W/o lock tab
24-9960 Chrome Set 1986-99 Chrome
24-9986 Stainless 24-0498 Smooth Set 1986-99 Chrome
24-9048 Chrome W/o lock tab
24-0341 — Set 2000-17 Chrome
Chrome Fork Cover Side Trim Strips
37-0505 4453 Top Nut with Chrome Cover
replace stock alloy type 67891-99 on 1986- *Note: Includes lower bearing.
17 FLST models. VT No. 24-9911 Fork Stem Lock Tabs replace broken, bent or missing
on stock lower triple trees, to be welded on. Fits 1986-
99 FLST. VT No. 51-0104
269
41mm Tree
24-0000 24-0347
24-0007
24-0346
FXST Triple Trees accepts 41mm fork tubes. Bottom tree

features built in rake and rounded edges. Trees use VT No. 24-0348
28-2218 rubber bushing set and headlamp bracket VT No.
31-9991 which are not included.
VT No. OEM Years Item Replica Chrome Forged Steel Triple Tree Sets include
lower bearing pressed on, dust shield set and upper bearing
Tree Sets
and cone nut.
24-0000 — 1984-87 FXST VT No. Year Model
24-9930 — 1988-99 FXST 24-0346 1984-87 FXST
Top Tree Only 24-0347 1988-99 FXST
24-0007 45672-80 1984-88 FXST 24-1335 2000-17 FXST
Lower Tree Only 24-0350 2000-17 FLST
24-0825 45665-80A 1984-87 FXST 24-0348 1986-99 FLST
24-0843* 45665-80A 1984-87 FXST 24-0350 2000-17 FLST
24-9933 45640-88B 1988-99 FXST
24-1070 Tab 1984-87 FXST 24-9933 24-0064
Chrome “D” Style Tree Set features
chrome steel construction to fit 1980-99
Softail models.
VT No. 24-0719
24-0061 Chrome FXST Lower Fork Stem accepts 41mm fork tube and
fits FXST or neck cups with built in stops.
VT No. OEM Years
24-0061 24-9933 45640-88B 1984-85
24-0064 Without lock 1988-99
24-0235 45640-00 2000-17
Ball Milled Chrome Billet
Triple Tree Sets include top
Smoothie Triple Tree Set features hidden stem nut tree for nut. Order bearings, cone nut
use with 41mm fork tubes. Kits include riser bushings and stem and dust covers separately.
hardware. 24-0069 Stock
VT No. Item Rake Models Year 24-3000 3°
24-0061 Tree Set Stock Big Twin 1949-99 5° Ball Milled Chrome Billet Inverted
24-0366 Tree Set 5° Big Twin 1949-99 Triple Tree Set with hidden top stem nut.
24-0154 Top Plugs 1949-76 Order bearings, cone nut and dust covers
24-2053 Stop Pins All Above 24-2053 separately.
VT No. 24-1031
Taper-Top Socket Fork Caps. 41mm

Glide. Fits 1948-76 FLH.
VT No. 24-0154
24-0746 Installed FXD Fork Stop
24-0746 Kit is to adapt
Chrome Billet Forge Triple Tree Set fits 41mm tubes. billet trees to
Includes 1” stem, hidden top fork tube caps, collet clamp at FXD models.
Universal Fork Stop
lower tree and head lamp mount. VT No. 24-0749
mounts to triple tree.
VT No. 24-0746
VT No. 24-0492
Chrome Ball Milled Triple Tree Set
Lower Fork Stem Retaining Ring
includes top nut, and has 41mm fork
tube holes with two grooves for pinch bolts. for 1986-up all models. Replaces
24-0067 45611-86.VT No. 12-0979
Order bearings, cone nut, and dust covers
separately. 37-8137 Chrome Flat Top Stem Nut replaces 45718-71
VT No. 24-0067 on 1978-86 FXE-FX-FXR.
VT No. Item
37-8137 Nut
9963-1 Washer
37-0988 Washer
270
Replica 39mm
Triple Tree
BIG TWIN
24-0669
Narrow Glide Conversion Kit to fit FXD-XL 39mm models. Chrome Triple Tree Sets include upper and lower trees to fit
Includes upper and lower triple trees, stem, stem nut, fork 39mm fork tubes as stock on 1990-05 FXD models.
stops, axle, axle spacers and fender spacers. Kit can be used VT No. Item
with 1984-99 FXST/FXDWG 41mm fork leg assemblies and 24-0669 Tee Set
1984-99 narrow glide 19” or 21” wheel assembly with alu- 37-0865 Screw Set
minum hub and front fender. Accepts 11.5” disc and caliper 12-0384 Bearing Set
12-0384
(custom brakes may cause interference with laced wheels). 24-0114 Dust Covers
Measures 415/16” between fender mounts and is for front wheel 24-0089 Bearing Set
speedometer operation, replace left side axle spacer with Top Triple Tree for 1988-94 FXR
speedo drive unit. and 1991-05 FXD-FXDL, replaces
VT No. Item 45739-87.
24-0958 Kit VT No. Item
36-2450 Speedometer Drive 24-1331 Top Tree Polished
37-9073 24-0637 24-1278 24-0865 Top Tree Chrome
28-1503 Top Bushing Set
37-0865 Screw Set
Chrome Lower Triple Tree Cover fits 39mm
39mm Chrome Fork Stem Nut Covers fit over stock stem nut. forks 1987-94 FXR, 1991-2017 FXD. Designed
37-9073 includes 2 fork tube cap covers and 1 stem nut cover for easy installation. VT No. 42-0342
for 1987-up FXRS-SP, 1988-90 FXLR, 1988-90 FXR.
VT No. Fits
24-0637 1987-up FXR
Upper Bracket Cover fits 1988-up
37-9073 Three piece set, Flat Top
XL-FXD 39mm forked models, when
37-9520 Three piece set Flat Top with Grooves
using a custom bottom mount headlamp.
24-1278 Three piece set, Dome Top Style
VT No. Item
24-1296 Three piece set, Pointed Top
42-0861 Cover
24-0826 2272-5 Screw Set
39mm Lower Tree Applications.

24-0802 VT No. Fits Finish
24-0803 24-0856 1988-94 FXR-FXRT Aluminum
Top Triple Tree for FXR-FX with 35mm tubes. 24-1020 1988-94 FXR-FXRT Chrome
VT No. FXR FX Finish 24-0857 1987-94 FXLR Polished
24-0802 1982-87 1973-84 Cast 24-0665 1987-94 FXLR Chrome
24-0803 1982-87 1973-84 Polished 24-0859 1990-05 FXD-FXDL Polished
24-0826 1982-87 1973-84 Chrome Alum. 24-0864 1990-05 FXD-FXDL Chrome
24-1322 24-1199
Lower Fork Stem Retaining Ring

for 1986-up all models.
VT No. 12-0979
FXR Triple Tree Sets. 35mm Lower Black Tree fits 1984-87
VT No. Year MM Finish FXR.
24-1322 1982-87 35 Polish/ Black VT No. 24-0806
24-1325 1988-94 39 Polish 24-0806
24-1199 1986-94 39 Chrome
39mm Steering Stabilizer Kit
includes brackets and adjustable
round body dampener piston. Fits
1991-05 FXD.
VT No. 24-0198
271
39mm Fork Kit 24-0373 24-0353
FX-FXR Fork Assembly with Single

Disc Chrome Lower Sliders. Complete
Narrow Glide Fork Assemblies for
2004-05 FXD models. 24-8563 include
chrome lower sliders.
VT No. 24-8563
24-8563
Chrome 39mm Fork Tube and Slider

Assembly available in right and left pairs, 39mm Chrome Single Disc Lower Fork Sliders.
completely assembled. Units have hard VT No. Fits Model
chrome fork tubes, and chrome lower slid- 24-0373 1988-99 FXR-FXD
ers, with springs and all internal components 24-0079 2000-2003 FXD
installed. Fit FXD single disc. 24-0353 2004-up FXD
VT No. Year
24-9985 1988-99
24-0984 2000-03
Flush Mount Axle fits 1988-04 FXD models, with ³⁄₄” axle and
39mm forks.
VT No. 44-0003
35 and 39mm Fork Plugs

39mm E-Z Fill Fork Tube Top
Plugs feature small oil fill cap built in
to fork tube top plug which will allow
fork oil change/fill without removing
top fork cap. Pairs. 1988-up.
24-0863
VT No. 24-0863
9914-2
24-0335
Chrome Top Fork Plugs fit 39mm FXR, 1987-94.
VT No. Type U/M
24-0335 Flat Pair
9913-2 Flat Each
9914-2 Dome Each
Chrome Domed Top Bolt fits 35mm. Fits Late1985-
Mid87 FXR.
VT No. 8863-1
272
41 mm Fork Tube and Slider Assembly
Fork Tube and Slider Assembly available in right and left pairs,
BIG TWIN
completely assembled. Units have hard chrome fork tubes, and
either polished or chrome lower sliders, with springs and all inter-
nal components installed.*Note: OE as noted.
VT No. Disc Fits Slider
41mm
24-9917 Dual 1980-83 FXWG Polish
24-0516 Dual 1980-83 FXWG Chrome
24-0763 Dual 1980-83 FXWG, Smooth Legs Polish
24-9995 Single 1986-99 FLST-FLSTF Polish
24-0511 Single 1986-99 FLST-FLSTF Chrome
24-0518 Dual 1986-99 FLST-FLSTF Chrome
24-0298 Single 2000-06 FLST Chrome
24-9918 Single 1984-99 FXST Polish
24-0510 Single 1984-99 FXST Chrome
24-0560 Single +2” 1984-99 FXST Chrome
24-0561 Single +4” 1984-99 FXST Chrome
24-9948 Dual 1984-99 FXST Polish
24-0517 Dual 1984-99 FXST Chrome
24-0763 24-0518 24-0539 24-0512 Single 2000-06 FXSTD Chrome
24-0539 Single 2000-06 FXST-FXDWG Chrome
24-0519 Single 1973-84 FLH Chrome
24-0241
24-0510 24-0561
24-0517
24-0584 24-1775 24-0594
24-0948 24-0512 24-0763

24-0298
24-0585 24-1215
Chrome Lower Fork Slider Sets replace stock polished slid-
ers on stock 41mm fork assemblies.
VT No. Year
24-0328 24-0336 For FXST-FXDWG-FXSTC (41mm)
Big Twin Glide Lower Leg Cap. 24-0584 2000-06 FXST, FXDWG
VT No. Finish Fits 24-1775 2007-17 FXST only
24-0328 Polish 1977-99 For FLST-FLSTC-FLSTF (41mm)
24-0336 Chrome 1977-99 24-0594 1986-99
24-0385 Chrome 2000-17 24-0585 2000-06 273
24-1215 2007-17
41mm Fork Tube Set
1997-13 FLT, FLHR, FLHT 2000-17 FXST, FLST, 2000-05
FXDWG 41mm.
24-0045 20⁷⁄₈” Replaces 45890-97 Chrome
Stock FLT Length Hard Chrome
24-0053 22⁷⁄₈” Replaces 45930-00 Hard Chrome
Stock FLST Length
24-0047 24¹⁄₂” Replaces 45417-00 Chrome
Stock FXST-FXDWG Length
24-0048 As Above Hard Chrome
24-0055 24⁷⁄₈" As Above Chrome Polished Chrome
24-0049 26¹⁄₂ As Above Hard Chrome
24-0056 26⁷⁄₈ Above Hard Chrome
24-0050 28¹⁄₂ As Above Hard Chrome 24-0961
24-0058 30⁷⁄₈ As Above Chrome
24-0052 32¹⁄₂ As Above Chrome
24-0072 36¹⁄₂” As Above Chrome
24-0073 38¹⁄₂” As Above Chrome 41MM Fork Tube Assemblies are hard chrome finish.
24-0074 40¹⁄₂” As Above Chrome Include top plug, springs, spacers and internal pieces com-
1984-96 FLT, FLHT; 1984-99 FXST-FXSTC, 1986-99 FLST- pletely assembled. Order bushing set separately.
FLSTF, FLSTN, 1993-99 FXDWG, 1985-86 FXWG, 41mm. 1984-99 FXST,1984-96 FLT, 1986-99 FLST, 1993-99
24-0411 20⁷⁄₈” Replaces 45824-84 Stock Chrome FXDWG
FLT length AEE (Chrome) Dura (Hard Chrome) Length
24-0027 As above Hard Chrome 24-0354 24-0960 24¹⁄₄”
24-0461 22⁷⁄₈” Replaces 45930-86 Chrome Stock FXST, FXDWG Length
Stock FLST Length 24-0356 24-0961 +2”
24-0412 24¹⁄₄” Replaces 45417-00 Chrome 24-0357 24-0962 +4”
Stock FXST, FXDWG Length 24-0358 +6”
24-0021 24¹⁄₄” Hard Chrome 24-0359 24-0964 +8”
24-1353 24⁷⁄₈” As Above Hard Chrome 24-0509 +10”
24-0413 26¹⁄₄” As Above Chrome 24-0551 +12”
24-0463 26⁷⁄₈” Chrome 24-0577 24-0967 +14”
24-1354 As Above Hard Chrome 24-0968 +16”
24-0414 28¹⁄₄” As Above Chrome Leg Sets VT No. Length
24-0472 32¹⁄₄” As Above Chrome
FL 1977-84 24-0028 20¹⁄₂”
24-0485 34¹⁄₄” As Above Chrome
24-0487 36¹⁄₄” As Above Chrome FLH 1949-76 24-0032 20”
24-0493 38¹⁄₄” As Above Chrome FXWG 1980-83 24-0029 24¹⁄₂”
24-0494 40¹⁄₄”As Above Chrome FLST 1986-99 24-0070 22⁷⁄₈”
Bushing Set 24-0097
Attention!! 24-1185
These fork tubes have been manufactured and tested for exact fit and applica-
tion per model. It can be difficult to identify the front end assemblies because
they may not always be original equipment. Before installing, compare old and
new tubes. Be sure the stock top plugs fit into the new fork tubes. To avoid
scratching the chrome, we suggest that the tubes be lightly rubbed with oil
before installing into fork legs. Be absolutely sure you have the right tubes 24-1188
before you install them. No fork tubes can be accepted for return that are
scratched or damaged due to improper installation or handling.
35/39mm Fork Tubes

1984-E86 XL, 1984-85 FXE-FXEF, 1984-86 FXR-XRS- 49mm Fork Tube Sets with hard chrome finish.
FXRDG-FXRC, except sport package. 35mm. 2006-17 All Dyna models (except FXDF).
VT No. Fits
24-0016 Stock 23¹⁄₄”, Hard Chrome 24-1185 Stock FXD 251/2”
24-0430 2” over stock, Hard Chrome 24-1186 Stock FXDWG 2715/₁₆”
1983-86 FXRT-FXRD, 1984-85 FXSB, 1985-86 FXRS 24-1064 +2” As Above 291/2”
with sport package. 35mm. 24-1065 +4” As Above 311/2”
24-0430 Stock 25¹⁄₂”, Hard Chrome
24-1066 +6” As Above 331/2”
Late1986-87 XL, 1987 FXR-FXRS models with showa fork 2008-17 FXDF
except FXRT-FXRD. 35mm. 24-1187 Stock 251/2”
24-0434 Stock 23³⁄₈”, Chrome 2014-17 FLT models
39mm 24-1188 Stock 223/4”
1988-94 FXRT, 1987-94 FXRS-SP. 39mm.
24-0019 Stock 25³⁄₈ , Chrome
24-0439 2” over stock,Chrome
24-0442 4” over stock, Chrome
1987-94 FXLR, 1988-94 FXR-FXRS 39mm, 1991-05 FXD, 24-0107
FXDL
24-0020 23³⁄₈”, Hard Chrome, Stock
24-0437 23³⁄₈”, Chrome, Stock 39mm Fork Tube Assembly includes internals with springs,
24-0019 25³⁄₈”, Chrome, Stock assembled for 1987-99. Tube length is 24¹⁄₄”.
24-0439 27³⁄₈”, (+2”) Chrome VT No. 24-0107
24-0442 29³⁄₈”, (+4”) Chrome
274
Fork Brace
24-1076
BIG TWIN
24-0841
Installed
24-0983
24-1041
24-1044
24-1043 24-1075
24-0841
24-1042
Steel Fork Brace.
Black Chrome Fits Model
24-1041 24-1042 41 mm FXST
24-0768
24-1043 24-1043 39 mm FXD
24-1076 24-1075 49mm FXD
24-1044 FXD-FXR 1988-2005
Polished Tweek Bar Fork
Brace is a two piece design
which clamps directly to fork
24-1407 tube. *As noted clamps directly
to fork tube. 24-0768 clamps to
24-9984 fork leg. Fits 41mm forks, 1949-
84 FLH, 1980-up FXWG-FXST.
Fork Brace is four piece design for easy installation on 39mm, VT No. 24-9984*
41mm or 49mm forks. Chrome finish except where noted.
VT No. Size Fits
24-0841 39mm 1985-05 FXR, FXD
24-1839 39mm 1991-05 FXD, 1988-94 FXR
24-1407 41mm Black, 86-16 FXST, 91-15 FXDWG, 80-84 FXWG
24-0983 49mm 2006-up FXD except FXDWG
Steering Damper Kit

Alloy Heavy Duty Steering Steering Stabilizer Kit includes brackets
Damper is universal, multi-po- and adjustable round body damper piston.
sition, adjustable and can be Made in Japan.
secured between the frame and
most forks. Fork tube and frame 24-0170
clamps sold separately.
VT No. 24-0168
24-0657
Steering Damper Fork Tube Clamp in alloy finish available

in two piece design for attaching damper end to fork tube.
VT No. Size 24-0196 24-0198
24-0657 39mm
24-1027 24-1243
27-0057 27-0059
Chrome Steel Mount Clamp with ³⁄₈ mount hole. Use to VT No. Fits Fork Year
mount damper body to frame tube. Sold pairs. 24-0170 FXST-FXWG Big Twin 41mm 1980-99
VT No. I. D. 24-0196 FXST 41mm 2000-07
27-0057 1” 24-0198 FXD 39mm 1991-99
27-0059 1¹⁄₄” 24-1027 FXDWG 41mm 1993-05
24-1378 24-1243 FXD 49mm 2006-17
24-1378 As Above, Black 49mm 2006-17 275
Fork Spring Kit Fork Tube Spring
Sets feature high
tensile strength wire
construction with
ground ends. Sold
in pairs for OEM
24-1563 24-0160 Fork replacement per the
factory number. For
Springs
20th Century Fork Spring Lowering Kits have progressively more fork spring
wound springs that resist bottoming out. Installation requires applications check
minor disassembly to lower the front forks 1¹⁄₄” or 2” depend- factory parts book.
ing on the spacer used. Kit includes springs, spacers and VT No. OEM Year/Model
hardware. Easily converts back to stock by reinstalling stock 39mm
fork springs. 24-0913 45376-87 1988-94 FXR-FXRS
VT No. Size Year/Model 24-0914 45384-83 1984-90 FXRT
24-1563 41 mm 1997-13 FLT 41mm
24-0160 39 mm 1987-94 FXR 24-0907 46051-49A 1949-77 FL-FLH
24-0161 35 mm 1984-87 FX-FXR 24-0908 45837-77 1977-84 FLH, 1980-83 FLT
24-0911 46048-84 1984-99 FXST-FXSTC
24-0525 45931-00 2000-up FLST
24-0912 45853-83 1983-96 FLT
24-2104 24-0915 45931-86 1986-99 FLST
Monotube Fork Cartridge Kits by Progressive Suspension Lower Damper Tube Springs.
converts dual damper rod forks to high performance cartridge VT No. OEM Fits
forks. Improves resistance to front brake drive, front end sta- 13-9258 45374-87 87-94 FXR, 91-2017 FXD, pair
bility and cornering control. 13-1946 45933-86 86-17 FLST, 2000-up FXDWG
VT No. Fits 13-9258
24-2102 2000-10 FXST
24-2103 2000-up FLST
24-2104 2004-10 XL
Progressive Suspension Fork Springs
feature high quality, high performance
replacement fork springs eliminate front
end sag, reduce nose dive under brak-
ing, improve cornering stability, increase
ride comfort and allow forks to utilize full
travel. Sold in pairs.
VT No. Size Fits
24-2057 39 1987-93 FXRS-SP, 1988-93 FXRT,
1991-05 Dynaglide, not FXDWG
24-2056 39 1987-94 FXLR, 1988-95 FXR-FXRS,
24-2045 39 1995-05 FXD
24-2048 41 1984-up FXST-FLST-FLSTF-FXDWG, 39mm Street Tough Fork Springs by 20th Century
1993-06 FXDWG,1980-13 FLT-FLHT-FLHS, Suspension. Progressively wound springs are made using
1980-86 FXWG, 1948-84 FL drawn spring wire. Eliminates front end sag, reduces nose
24-2040 35 1983-87 FXRT, 1982-87 FXR-FXRS, dive under braking and improves stability. 1988-91 Showa
1985-86 FXRD, 1973-86 FX-FXE-FXS-FXSB FXR.
Progressive Suspension VT No. 24-0164
Fork Lowering Kits.
Each kit comes with
Progressive rate fork springs
and spacers. Each kit can be
installed at two different lev-
els to lower fork 1” or 2”.
24-1561
VT No. Fits
24-1561 1984-13 FXST-FLST,1993-05 FXDWG,
1980-13 FLH-FLT, 1978-86 FL-FXWG
24-1560 1991-92 FXD, 1993-99 FXDL-FXDS,
1988-94 FXR-FXLR
24-1559 1982-87 FXR-FXRS, 1983-87 FXRT, 1984-86 FX
Note: When installing these kits, you must check ground clearance and tire to
fender clearance.
276
Fork Damper Tube
1984-99 Softail
BIG TWIN
Internal Fork
Hardware Kits include
springs, damper kits,
seal kit, washer, inner
Fork Damper Tubes less hardware. Sold as pairs. cap tube plug and top
VT No. Year Model taper fork cap.
41mm VT No. 24-0767
24-0455 1984-99 FXST
24-0678 1986-99 FLST
24-0180 1983-96 FLT
24-0148 1977-up Big Twin Nylon Ring
24-0469 2000-07 FXST
24-0489 2000-06 FLST
24-0490 1997-08 FLT
39mm
24-0647 1987-93 FXR 24-0470 24-0468
24-0476 1995-17 FXD
24-0676 1987-94 FXR Nylon Ring Fork Damper Tube Kit includes for two sides, damper tubes
with rings, screws and washers, lower stops, slider seal wash-
ers and retaining rings. For Showa forks.
Fork Damper Sets will lower VT No. Fits Size (mm)
front forks on Softail mod- 24-0470 1984-99 FXST-FXWG 41
els 2.5”. Use with stock fork 24-1270 2000-07 FXST 41
springs. 24-0471 1986-99 FLST 41
VT No. Year 24-0488 1983-96 FLT 41
24-0528 1984-99 24-0468 1987-93 FXR 39
24-0529 2000-06 24-0496 1995-17 FXD 39
24-1333 2008-17 FXD 49
24-1334 2006-17 FXD 49
Replica Fork Damper
Rods for all 39mm XL,
except 1992-98 Hugger,
all Dynaglides and 1987-
94 FXRT-FXRS. Sold in
pairs. VT No. 24-0464
Fork Internals
41mm Damper Valve Set fits 2000-up
FXST models. Allows accurate damping
of oil flow.
VT No. 24-0361
24-0097
Fork Bushings.
Fork Damper Valve fits 2009-up. OEM# VT No. Size Fits
46209-09. 24-0450 35mm 1984-87 FXR Upper
VT No. 24-1413 24-0451 35mm 1984-87 FXR Lower
24-0182 39mm 1988-up FXR Upper
24-1413 24-0181 39mm 1988-94 FXR Lower
24-0258 Lower Damper Tube Stop, sold in pairs. 24-0449 41mm 1984-10 FXST, 1986-17 FLST,
VT No. Fits 1984-13 FLT Upper
24-0258 1984-99 FXST-FLT 24-0097 41mm Same as Above FXST-FLT Lower
1995-96 FXDWG 24-0011
9910-4
24-0491 1997-17 FXDWG 24-0010 9758-2
2000-up FXST-FLT
24-0460 1984-87 FXR
Fork Drain Screws are supplied with washers. Sold as pair.
24-0466 1988-94 FXR
VT No. Use
24-0375 1990-17 FXD
9910-4 1973-up Showa
Chrome Fork Slider Bottom Cap Stud and Nut 24-0010 1976-up Showa
Kit includes locknuts and studs. Fits 1973-up 9758-2 1977-up FLH, 1980-up FXWG
Showa and Kayaba. 24-0011 As Above
VT No. 8826-6
277
Fork Boots
39mm Fork Boot Cover Dust Shield Kit fits 1987-94 FXR,
1991-05 FXD.
24-0098 24-9049 VT No. Model
24-0090 Kit
14-0956 Seals only
24-9993
24-0600 24-0606
24-0499 24-9939
24-9992
2 Piece Chrome Fork Boot Cover Sets install overstock rub-
24-0363 ber fork boot by the unique interlocking springs supplied with
the kit to securely hold boot covers in place.
24-1219 VT No. MM Model
24-1218
24-9992 35 Pre 1987 FX-FXR
24-9993 41 1980-up FXWG-FXST, 1993-05 FXDWG
Chrome Wiper Boot Covers are fork boots die-cast for a

snug-fit over the stock rubber fork wiper boot.
VT No. Item MM
24-9939 1987-94 FXR 39 24-1213
24-0098 1980-86 FXWG, 1984-90 FXST 41 Chrome Fork Boot Covers. Requires removal of front wheel
24-9049 1980-90 FXWG-FXST 41 for installation. Fits 2006-17 FXD-FXDWG, 49mm.
24-0600 1991-up FXST 41 VT No. 24-1213
1991-17 FXDWG 41
24-0606 1991-up FXST 41
1993-05 FXDWG 41
24-0363 1991-up FXST 41
1993-05 FXDWG 41
24-0937 Custom 41
28-0439
24-0499 2006-up FXD 49
24-1218 2006-up FXD 49 28-0440
14-0956 28-0901
28-0439
“Gaiter” Fork Boots are flexible type for FXST-FXDWG-
FXWG 41mm forks or FXD 39mm forks. Rubber boots are
230mm long, black. Sold in pairs.
28-0904 28-0909 VT No. Size
28-0440 39mm
Rubber Fork Boots are designed for a better fit and improved 28-0439 41mm
sealing and wiping action. Sold in pairs.
VT No. Model MM
14-0956 1987-94 FXR 39
28-0901 1949-early 77 FLH 41
28-0904 1984-up FXST, 1980-83 FXWG 41
28-0909 1991-up FXST 41
1993-05 FXDWG 41
278
Fork Seal
14-0943
V-Twin Deluxe Seal
Kits include seals, gas-
14-0038 kets, snap rings, wash- 14-0704 GB Deluxe Fork Seal
ers and o-rings. James
BIG TWIN
Rebuilding Kits include all
Kits include seals and pieces illustrated as appropri-
o-rings only. ate for each application.
Complete kits include fork
James VT No. MM Fits tube bushings, seal and relat-
14-0038 14-0939 41 1984-10 FXST ed retaining rings.
1986-up FLST, 1986-13 FLT
14-0042 14-0943 39 1988-94 FXR-FXLR Complete VT No. Fits Size
14-0044 — 35 1984-92 FX-FXR 24-1068 14-0700 1984-10 FXST 41 mm
14-0047 — 49 2006-17 FXD-FXDWG 24-1068 14-0701 1986-14 FLST 41 mm
14-0023 14-0956 24-1028 14-0704 1988-05 Showa 39 mm
14-0705 1984-87 Showa 35 mm
24-1083 2006-17 FXD 49 mm
Leak Proof Fork Seals feature a veloprene
coated. coating to reduce drag and carry a
Fork Seal Sets are precision molded, sold in pairs. manufacturer’s lifetime guarantee. Sold in
VT No. OEM Years Type Size pairs.
14-0016 45387-83 1982-87 FXR-FXS-FXRT 35 mm VT No. Size Fits
14-0023 45875-84 1984-17 FXST-FLST 41 mm 14-0252 41mm 1984-05 FL-FXST-
1985-05 FXDWG FLT-FLST-FXWG
1987-up FLT 14-0024 39mm 1988-05 FXR
1984-86 FLT 14-0254 49mm 2006-17 FXST, FXD
14-0049 45875-84A 1999-up FLST-FXST 41 mm
14-0021 45378-87 1987-08 FXLR
24-0620
1988-08 FXRSE 39 mm
14-0956 45401-87 1988-05 Dust Seal 39 mm
A-Slider Seal Washers are zinc plated. Fit 1987-up FXST.
Air Control O-Ring Kit for FLT
Replaces 45865-84.
and FXR models. Kit includes
VT No. 24-0620
o-rings and seals needed to repair
a leaking air control system. Fits B-Fork Seal Retaining Ring.
1984-up FLT and 1984-94 FXRT VT No. OEM Fits
models with air control front forks. 24-0614 45908-80 1980-87 FXS-FXSB-FXR, XL
VT No. 14-0045 24-0623 45905-87 1988-05 FXR-FXD, XLH
Fork Seal Spacers.
VT No OEM Fits
24-0626 45377-87 1987-94 FXR
24-0627 45386-83 1986-87 XL
Stem Nut Cover

Chrome Stem Bolt features
dome shape stem bolt with
chrome washer. Replaces 4453
bolt and cover on 1986-up 37-9520 24-0637
FXST, FLST, FXR, FXD. 39mm Chrome Fork Stem Nut
VT No. 9978-2 Covers fit over stock stem nut.
37-9073 includes two fork tube
cap covers and one stem nut
Chrome Fork Stem Nut cover for 1987-94 FXRS-SP,
Cover to fit over stock stem 1988-90 FXLR, 1988-90 FXR,
nut and held in place by set 1995-05 FXD.
screws. Cover is one piece.
VT No. Fits VT No. Fits
24-1336 1980-up 39mm fork 24-0637 1987-up FXR, 48329-90
37-9073 Three Piece Set, Flat Top
37-9520 Three Piece Set, Flat Top Style with Groove
Chrome Fork Stem Cap Cover has stud to 24-1278 Three Piece Set, Dome
screw into 1980-up FXST-FXWG, 1986-up 24-1296 Three Piece Set, Pointed
FXDWG Fork Stem. Acorn Stud for use on 1987-up FXR-FXST.
VT No. 24-0818 Order nut separately.
VT No. Item
37-0443 24-1209
24-1209 Stud
37-0443 Acorn Nut
279
41mm Fork Plug Domed Allen Caps fit 1978-up
Wide Glide 41mm forks.
24-0625 VT No. 24-0981
24-0599
24-0186 9912-2
Glide Fork Plug Kit includes fork tube plugs and matching Chrome Fork Tube Top Caps are sold each unless noted as
top filler cap plugs, 1984-2012 FXST. pair. Replaces 45419-80 for 1980-up FXST-FXWG, 41mm.
VT No. Plug Style Glide Fork
24-0625 Stock VT No. U/M
24-0599 Tapered 9912-2 Each
8716-1 Chrome Inner Fork Tube Plugs for 1984-up 24-0186 Pair
Big Twin glide model forks. Replaces 45838-77. Chrome Fork Tube Plug with 5710
VT No. U/M washer. Fits FL, FXWG, Softail
8716-1 Each 1978-up.
8716-1T Each VT No. 2311-2
Tube Cap Washer and

Seal for Showa and
Kayaba fork legs, 10 pack.
VT No. OEM # Fits Finish

24-0610 5710 A 1980-up FXWG fits Tube Plug Zinc
9964-2 5710 A 1980-up FXWG fits Tube Plug Chrome
14-0132 45773-48 B 1948-up FLH-FXWG, Cap Seal Detail Area Enlarged
Fork Tube Plug Tool. Special socket fits 1948-up Glide Fork
Plug, ¹⁄₂” drive.
VT No. 16-0630
Fork Stop
24-0895 Stainless Steel Fork Stops
24-0894
mount to custom triple trees
under lower bearing.
VT No. Model Year 24-0749
24-0894 FXD 1991-up
24-0895 Big Twin 1948-99
24-1208
24-1201
Fork Stop Kit is to adapt billet trees to FXD and Big Twin
models.
24-2053 VT No. Type
Fork Stop Pins. Lower trees may be drilled and tapped to 24-0749 FXD, 3” center to center
accept the stop pins. 24-1208 Big Twin, 2¹⁵⁄₁₆” center to center
VT No. Type Note Universal Fork Stop mounts to
24-2053 Long 1⁷⁄₈” Long, not including threaded portion triple tree.
24-1201 Tapered VT No. 24-0492
24-1082
24-1081
Fork Lock Pins include two barrel keys.
VT No. Year/Model
24-1081 1990-99 FXST, 2001-2005 FXD
24-1082 1993-00 FXD, 2000 FXST
280
24-0283 “Raked” Neck Kit
Installed Note: Rake Neck Kits are for Show Applications only and
BIG TWIN
Require longer Fork Tubes to be installed.
Chrome “Raked” Fork Neck Cup
Set replaces existing removable cups
to provide 3° rake when installed. Kit
includes chrome cup set, bearing set
and dust covers. Kits 24-0292 and
24-0294 include longer fork stem and
adapter to fit neck, but will not accept
stock fork stem lock. 24-0292 and
24-0292 24-0294 24-0294 feature built in external fork
stop tab.
VT No. Year Model
24-0283 1960-87 FXST-FXWG
24-0295 1960-87 FXST-FXWG
24-0292 1988-up FXST,
1990-up FXDWG
24-0294 1991-05 FXD
24-0377 24-1268
Raked Neck Kits include

chrome cups, bearings, dust
cover, stop tab and longer
stem. Longer fork tubes
required for installation. Fit
1991-05 FXD. Chrome Raked Neck Cups Only include bearings and races.
VT No. Rake A longer fork stem and longer fork tubes are required for
24-0378 3° installation on 1987-up Big Twin frames.
24-1286 5° VT No. Rake
24-0377 3°
24-1287 5°
24-0378
24-1268 7°
Neck Cups with Stops

24-0296
Chrome Big Twin Neck
Cup Kit features built in
fork stop on lower cup
to accept 1988-99 FXST
lower fork stem with inte-
gral stop. Kit includes 24-0671
chrome upper and lower
cups with races, bearings
and dust shields.
VT No. Item
24-0231 Cup Kit Chrome Internal Fork Stop Kit includes pieces for complete
12-0384 Bearings installation on Big Twins, and custom frames which accept
press in neck cups. Kit allows choice of turning radius of 35 or
45 degrees.
VT No. Year Model Degrees
24-0296 1936-87 Big Twin 35° and 45°
24-0671* 1988-up Softail-FXDWG 45°
*Note: Does not include races, bearings, neck cups.
Smooth Neck Cup
Set features built in
Chrome Mega-Neck Cup Set features 1” inner diameter
stop and includes
bearing set with large outer diameter on the outer race which
races and bearings.
will provide 1.68 times the radial capacity and 1.57 times the
VT No. 24-0874
axial capacity of a conventional bearing. Kit includes chrome
cups, bearings and races and two dust covers.
VT No. 24-0300
281
Big Twin Neck Kit 24-0322
Chrome Smoothie Neck
Cup Kit includes races, 1”
bearings and dust cover set
for Big Twins.
24-0122 VT No. Item
24-0322 Kit
24-1156 Upper Dust Cover
24-0112 Lower Dust Cover
Hex Neck Cup

Kit includes 1”
neck bearing set.
VT No. 24-0305
24-0253 24-0119
24-0121
Fork Stem Bearings and Races. Order

separately as noted. Sold as each.
VT No. Type Fits
Big Twin Neck Cup Assembly available as a complete kit
12-0335 Timken Bearing 1960-up Big Twin
which includes chrome neck cups with races installed and a
12-0384 Peer Bearing 1960-up Big Twin
chrome top nut.
12-0348 Timken Race 1960-up Big Twin
VT No. Item
12-0383 Peer Race 1960-up Big Twin
24-0253 Cup Kit
Dust Shield Sets include upper and
24-0119 Cup Set, chrome
lower for 1982-up.
24-0121 Cup Set, zinc
24-1282 VT No. Finish
24-1282 Bearing Kit
24-0117 Zinc
Fork Bearing Kit includes two 24-0114 Chrome
tapered bearings and two seals.
Fits 1949-68 FL and 1970-up FX. Bearing Seal Set. Metal backed
VT No. Item seal fits all 1” neck bearing applica-
24-0089 Kit tions pair. Fits 2004-up XL.
24-1750 Complete Kit VT No. 14-0174
24-1381 Seal Kit
Stem Nuts
37-0442 37-0443 Top Stem Nut and Cover Kit fits 1986-up
7009-1
FXST-FLST, 1988-up FXR, FXD. Includes
chrome cover bolt and washer.
VT No. Item Fits
37-0505 Kit FXST-FXDWG
9976-2 Bolt and Washer Set FLST-FXD-FXR
9977-1 Chrome Cover FLST-FXD-FXR
Chrome Glide Acorn Nut is 1” x 24” Stem Nut and Lockwasher
available with shoulder for alignment in 24-1460
Kit fits 1980-up FXWG-FXST.
top tee. Fits 1948-up FL-FLH. Includes lock washer.
Shoulder Without Shoulder
37-0442 37-0443 VT No. Finish Item
7802-1 7009-1T 8808-2 Black Kit
24-1460 Kit 8808-2T Black Kit
37-8138 Chrome Kit
24-0197 Zinc Kit 17-0954
37-0597 Chrome Nut
24-0185 Zinc Nut
24-0667 24-0279 24-0926 17-0924 Zinc Lock tab, 10 pack
24-0278
17-0954 Chrome Lock tab, 10 pack
Triple Tree Top Bearing Adjusting Nut for Big Twins. Cone Nut Spanner is used for
VT No. Years Model removing and installing crenulated
24-0278 1984-99 FXST nuts and dust covers with internal
24-0667 2000-up FXSTD thread. Fits 1948-59 FL.
24-0279 1980-up FLT VT No. 16-1344
24-0926 2006-up FXD
282
Custom Kickstand
1980-99 WG-FXST
BIG TWIN
Kickstand Assembly
features chrome steel
construction with hid-
den spring mechanism.
Custom Kickstand Assembly features full forged construction VT No. 27-0254
with chrome smooth contour design, including recessed mount Hidden 27-0144 27-0145
screws for 1936-99 Big Twin, 4-Speed, 1984-99 Softail models. Spring!
Stock length. VT No. 27-0253
27-0144
27-0670 installed
Installed
27-0143
Chrome Adjustable Hidden Spring Kickstands mount to
years listed with twos bolts.
VT No. Years Model
Hidden 27-0143 1988-99 Softail
Spring! 27-0144 2000-up Softail
27-0145 1982-94 FXR
27-0515 27-0552
27-0670 features adjustable leg

Chrome Custom Kickstand Kit fits 2-bolt mounting. Unit
includes stand, spring, mount and countersunk bolts. 27-0552
features hidden spring.
VT No. Years Model
27-0515 1986-99 FXST
Wyatt Gatling Big Twin Kickstand Assembly 27-0552 1986-99 FXST
features adjustable leg and hidden spring.
Mounting is by 3 bolts on left front frame boss. Fits
1984-99 FXST. VT No. 27-0670
For FXD
Weld On Stands 27-0535 27-0593
27-1818
27-0133
Weld On Kickstand Assemblies feature chrome stand with

hidden spring. Units fit tube size as noted.
VT No. Size 27-0135
27-0133 1¹⁄₈”
27-0134 1¹⁄₄”
27-1785 1³⁄₈” 27-0378 27-0404
27-0135 1¹⁄₂” 1990-17 Chrome Kickstand to fit FXD, FXDWG and FXDL.
27-0136 2” VT No. Item Type Year 27-0839
27-0683 Spring Kit 27-0535 Stand Stock 1990-2005
27-0378 Kit Stock 1990-2005
27-0683
27-0593 Stand 1” Under 1991-2005
27-1818 Stand 1” Under 2006-2016
Weld On Kickstand 27-0008 Stand Stock 2006-2016
Assembly includes weld 27-1819 Stand Stock Black 2006-2016 28-0435
on type heavy duty mount, 27-0404 Kit Stock 2006-2016
chrome spring and chrome 13-0176 Spring 1991-2001
kick stand with forged flat 13-0186 Spring 2002-2017
end. 28-0435 Bumper Stop 1991-2000
28-0438 Bumper 2001-2017
VT No. 27-0257
27-0836 Kit 1991-1997
27-0839 Kit 1998-2017 13-0186
27-2102 Extension 1993-2017
283
Big Twin Kickstand 27-1620
27-0523
27-0538
27-1671 27-0743
27-0707
27-0074
27-1723 9617-18
27-0794
27-0377
27-0835
Kickstand Assembly chrome as shown for 1936-85 Big Twin-
FL-FX-FXWG and for 1984-99 FXST.
VT No. Years/Type
27-1620 1984-99 FXST Stock
27-1671 1984-99 FXST 1” Under
27-0743 1984-99 FXST 2” Under
27-0376 27-1723 1986-99 FLST Stock
9617-18 1936-99 Chrome Mount Kit
Chrome Contour Kickstand Legs
27-0255 include lock tab. Fits 1989-99
FXST models.
VT No. 27-0255
27-0015
Chrome Stock Length Kickstand features a ball tipped built

Forged Big Twin Kickstand for FXST is made of heat treated in extension arm that makes the stand easier to use. Fits all
steel and chrome featuring flattened base as original. 1989-06 FXST models.
VT No. Type Year VT No. 27-3562
27-0523 Stock 1986-06
27-0538 1” Lower 1986-06
27-0707 2” Lower 1989-06
27-0074 Stock Kit 2007-17, Chrome
27-0376 Stock 2007-17, Black
27-0377 Stock 2007-17, Chrome
27-0794 Stock 2007-17, Chrome
27-0835 1” Lower 2007-up
27-0024 Bushing 2007-17, Brass 27-0168
27-0168 Bushing 2007-17, Brass
27-0774 Clip 2007-up
27-0015 2007-17, Complete Assembly
48-0630 Kickstand Pad
284
Big Twin Complete Chrome
Kickstand Mounting Kit includes
kickstand mount, spring, leg stop
Big Twin
Kickstand Hardware
BIG TWIN
and spring plate.
VT No. Year Model
27-0550 84-99 FXST
27-0551 86-99 FLST 13-9162
Chrome Smooth 13-0588
Kickstand Bracket for
1980-99 FXST is one- 13-0185
piece forged design with 13-0176
recessed mount hardware.
VT No. 27-0250 13-0182
13-0545
Jiffy Stand and Shift Mounting Chrome Kickstand Springs.
Plate Bolt Kit to attach assembly to Chrome Black OEM Model
left side of frame for 1936-99. 13-9162 — 50005-85A 1986-06 FXST
VT No. Type Finish 1991-up FXR
9617-18 Hex Chrome 13-0588 — 5 pack 1986-06 FXST
9619-18 Hex Parkerized 13-0185 — Heavy 1986-06 FXST
13-0176 — 50057-91 1991-01 FXD
13-0182 13-0351 50112-99 1999-06 FLT
27-1625 B C D 27-0503 13-0545 13-0350 49725-07 2007-up FLT, FLST
Kickstand Tab Kit includes chrome tab,
spring, washer and acorn nut. Fits 1989-
2006 FXST and FLST.
27-0504 VT No. 27-0545
27-1622 27-0506
27-0779
Chrome Big Twin Kickstand Hardware.
VT No. Year Model
Mount Brackets
27-1622 1986-99 FLST (B)
27-1625 1986-99 FXST (B)
Spring Plates (C)
27-0506 1984-90 FXST
27-0503 1991-06 FXST, FLST Chrome Adjustable Kickstand Locktab Kit includes chrome
Leg Stop (D) lock tab, flat washer, acorn nut and spring. Prevents stand from
27-0504 1984-06 FXST hitting primary cover.
Kickstand Lowering Wedge fits under the VT No. Item
mount bracket to change the angle of the 27-0514 Tab
bracket and assembly when using shock or fork 27-0779 Kit, 1986-2006 FXST, FLST
lowering kits. VT No. 31-0215
27-0536
28-0704 27-1786 28-0617
27-1644
27-1644
Kickstand Bumper Stops. Installed
VT No. Fits U/M 27-0521
28-0704 1970-84 FL, FX 10 pk
28-0617 1993-up Big Twin, 10 pk
fits in VT No. 27-0523 28-0448
28-0448 2007-13 FLST Each
28-0449 2007-13 FLT Each
27-1786 2007-17 FXST Kit
27-0090 27-0536
Installed
Kickstand Extensions allow rider to more readily access side
stand.
27-0301 VT No. Fits
27-1644 1986-06 FXST, FLST
Kickstand Extensions
27-0536 1986-06 FXST, FLST
VT No. Years Fits
27-1786 2007-17 FXST
27-0090 2000-06 FXST, FLST
27-0521 1991-17 FXD
27-0092 1999-17 FXD
27-0301 1993-17 FXD Note: Black finish 285
Detachable Side Plates, Tops & Hardware
50-1609 50-1613
50-1608 50-1614
50-1617
50-0237
50-1610 31-1568
31-1566
50-1618 50-1619 31-1570

50-1612 50-1616
31-1565 31-1567 50-1611 50-1615 31-1569
Sissy Bar Tops for both Rigid and Detachable Side Plates.
11” Sissy Bar Shorty 16” Fitment
Mini Low Hand Rail Sissy Bar
50-1646 2013-17 FXSB, FXSBE, 2016-17 FXSE
50-1121 50-1122 2006-17 FXST, FXSTB, FXSTS, FLSTFSE2, 07-17 FXSTC, FLSTF, FLSTFB, FXSTSSE/2, FLSTSE/2/3
and FLSTSB. 2007-17 FXSTC, require separate purchase of Fender Mounted Seat.
50-0815 50-0819 50-0811 2004-up XL models with detachable side plates, 2006-17 Dyna (except FXDF, FXDFSE/2, &
2010 FXDWG, 1984-05 Softail models (except FXSTD) & 2006-17 FL Softail models (except ‘06
FLSTFSE2, 2007-17 FLSTF, FLSTFB, FLSTSE & FLSTSB)
50-0816 50-0812 1994–2003 XL Models, 1991–01 FXD models, 1982 -94 FXR models.
50-0842 50-0843 50-0841 2002-05 FXD models equipped with either rigid or detachable side plates.
Also fits 2004-later XL models with rigid sideplates.
Rigid Mount Side Straps Fitment
50-0844 2000-17 FXST, FXSTB, FXSTS, FLSTFSE2, 2007-17 FXSTC, FLSTF, FLSTFB, FXSTSSE/2,
FLSTSE/2/3 and FLSTSB models with appropriate sideplates. 2007-17 FXSTC models require separate
purchase of fender mounted seat.
50-0800 1997-99 FLSTS, 1984-99 FXSTC, FXSTS and 1998-99 FXSTB models.
50-0801 1986-99 FLSTC, FLSTF, FLSTN models (except FLSTS).
50-0802 1991-95 FXD Models.
50-0806 1982-94 FXR
50-0826 1996-05 FXD, and FXDL models (standard on 96-00 FXDS-CONV). Also fits 1999 and 2002-05 FXDX
and 2001-05 FXDXT models.
50-0857 2008-13 FXDF and FXDFSE/2, 2006-08 FXDWG models.
50-0858 2006-17 FXD models (except FLD, FXDWG, FXDF and FXDFSE/2)
50-1556 1997-2008 FLHR, FLTR AND FLHX
50-1557 2009-13 FLHR, FLTR,FLHXs
FXST-FLST Detachable Side Plates, Docking Hardware and Turn Signal Relocation Kits
Available to fit: Docking Directional
Hardware Relocation Kit
1984-99 Softail® Docking Hardware for Detachable Sideplates
Docking hardware fit is dependent on vehicle model
Detachable Sideplates VT No. 50-1617 and Saddlebags: Heritage Style 1984-99 FLSTC 50-1618 Not Required
Detachable Sideplates VT No. 50-1617 only 1984-99 FLSTC, FLSTF, FXSTC, FXSTS 50-1619 Not Required
Detachable Sideplates VT No. 50-1617 only 1984-99 FXSTSB 50-1619 31-1570

2000-up Softail® Docking Hardware Detachable Sideplates
Docking hardware fitment is dependent on vehicle model
Without saddlebags VT No. 50-1608 2000-01 FLSTF, FXST, FXSTB, FXSTS 50-1610 31-1565
2002 FXST, FXSTB, FXSTS, FLSTF 50-1610 31-1566
2003-17 FXST, FXSTB, FXSTS, FXSTSSE, 50-1611 31-1567
FXSTC, FLSTF, FLSTFB, FLSTFBS, FLSTSB,
2006 FLSTFSE
2005-17 FLSTN, FLST 50-1611 Not Required
2005-07 FLSTSC 50-1611 31-1567
With Original Equipment Saddlebags & Detachable Sideplates 2000-02 FLSTC 31-1568 Not Required
VT No. 50-1609 2003-17 FLSTC 50-1612 Not Required
2000-01 FLSTS 31-1568 53820-00
2002 FLSTS 31-1568 53859-02A
2003 FLSTS 50-1612 53959-06 Chrome
54268-10 Black
2005-07 FLSTSC 50-1612 53959-06 Chrome
54268-10 Black
2006 FLST 50-1612 Not Required
Dyna for Detachables Side Plates, Docking Hardware and Turn Signal Relocation Kits.
VT No. Available to fit: Required Docking Hardware Turn Signal Relocation Kit
50-0271 1999 FXDX, 1996-01 FXD & FXDL 50-1615 Not Required
50-0237 1993-01 FXDWG 50-1635 Not Required
50-0237 2001-FXDWG2, 2002-FXDWG3, 2002-05 FXDWG 50-1616 No Required
50-1613 2006-08 FXDWG &2008-09 FXDF 31-1739 Not Required
2009-10 FXDFSE
50-1613 2006-up FXD, FXDC, FXDL and FXDSE 50-1614 31-1569
2006-08 FXDB
50-1613 2009-up FXDB (except 2013-up HDI 31-1740 31-1569
and India Configuration) 2016-up FXDLS
50-1613 2010-up FXDWG 31-1738 31-1569
50-1613 2010-up FXDF 31-1739 Not Required
286
50-0811 Top
Rigid Mount Sissy Bar
50-0841
BIG TWIN
50-1122 Outside 50-0843
Width 50-0812 50-0814
50-1121 50-0811
50-0816 50-0815 50-0842 50-0819 50-0322
50-0844 50-0802 50-0826 50-1556
50-0800 Side Straps
50-0857 50-0826 50-0858 50-0806
50-1557
Sissy Bar Side Strap and Backs. Order back and straps separately. *Note: Round Style Bar**Note: 20” Rigid Mount Type
Fitment Side Straps 16” Back 11” Sissy Bar Round Width
2006-17 FXST, FXSTB, FXSTS, FLSTFSE 50-0844 50-1122 50-1121 — 50-0322 11¹⁄₁₆”
1984-99 FXST, 1988-99 FXSTS 50-0800 50-0811 50-0815 50-0819 — 8³⁄₄”
1980-86 FXWG, 1997-99 FLSTS
1984-99 FXST Round Style 50-0800 50-0322* — — — 8³⁄₄”
2000-02 FXST-FXSTS-FLSTF-FXSTB* 50-0844 50-0811 50-0815 50-0819 — 8³⁄₄”
2003-05 FXST-FXSTS-FLSTF-FXSTB 50-0844 50-0811 50-0815 50-0819 — 8³⁄₄”
2000-17 FLSTS-FLSTC, 50-1227 50-0811 50-0815 50-0819 — 8³⁄₄”
2005-17 FLSTSC, FLSTN
50-0820 42-0156
1986-99 FLST 50-0801 50-0811 50-0815 50-0819 — 8³⁄₄” Sissy Bar Inserts mount with
1991-95 Dyna FXD 50-0802 50-0812 50-0816 — 50-0893 6³⁄₄” screws to cross bar.
1996-01 Dyna, FXD 50-0826 50-0812 50-0816 — — 6³⁄₄” VT No. Type
2006-08 Dyna WG 50-0857 50-0811 50-0818 — — 7³⁄₈”
2009-17 Dyna WG 50-0858 50-0811 50-0815 — — 8³⁄₄”
42-0156 Brass Live to Ride, Eagle
2002-05 Dyna FXD 50-0826 50-0841 50-0842 50-0843 50-1192 7¹⁄₂”
2006-17 Dyna FXD 50-0858 50-0811 50-0815 — — 8³⁄₄”
1982-94 FXR 50-0806 50-0812 50-0816 — 50-0893 6³⁄₄”
1986-99 FLST 50-0801 50-0642** 50-0815 — 50-0322 8³⁄₄”
2000-16 FLST 50-1227 50-0811 50-0815 50-0819 — 8³⁄₄”
47-1963 47-1964 47-1972

Button Sissy Bar Pads
mount to square stock
sissy bars, Mini fits 12”
bar, 2 button fits 16” bar.
Chrome mount clamps
included, black only.
Mini Back Rest
VT No. Type in black fea-
47-1963 Mini 31-1987 tures a stainless
47-1964 2-Button steel insert with
47-1972* Smooth chrome frame Fender Mount Sissy Bar Kit in-
47-0457* Buttoned mounting sys- cludes mount bracket and 8¹⁄₂” grab
47-0478 Buttoned tem for short rail, measured from top of fender,
31-1987 Brackets for Above sissy bars. with chrome finish.
*Note: For use on OEM sissy bar uprights only. 47-0457 VT No. 50-0503
VT No. 47-0753
287
Belt Guard FXR-FXB-FXD
27-0688 Installed
27-0859
27-0534
2006-up Shorty
Upper Belt Guard for
27-1568 FXD-FXDWG models.
27-1565 VT No. 27-0688
Chrome Rear Belt Guards for models listed. 27-1651

VT No. Fits
27-1568 1987-94 FXR-FXRS-FXLR
27-1565 1985-86 FXR-FXRS-FXSB 27-1650
27-0527 1992-99 FXD-FXDL-FXDWG
27-0534 2000-05 All FXD models Chrome Lower Belt Guard
27-0859 2007-17 All FXD models Covers for belt drive FXR-FXD-
FLT models. Note: Pulley Tooth
31-0946 2006-17 FXD Bracket
size.
27-0686 VT No. Teeth Model
27-1650 70/65 1991-05 FXD
27-1651 61 1991-05 FXD
27-0686 70 2007-17 FXD
Chrome Lower Belt Guard.
27-1541 Fits 1985-92 FXR with 70 tooth
27-0679 pulley. *Note: Designed to match
Chrome Dress Up Kits fit FXD models. Kits include upper 27-1568 upper belt guard.
and lower belt guard with a chrome pulley cover. VT No. 27-1541*
VT No. Teeth Year
27-0679 70 1991-99 Short Chrome Belt Guard fits
27-0680 61 1991-99 1986-99 FXST-FLST models.
27-0681 70 2000-05 VT No. 27-1706
27-0790 70 2007-17 27-1706
288
Belt Guard for Softail
BIG TWIN
27-0185
27-1119
27-1120
27-0185
Shorty Chrome Upper Belt Guard for Softail models. Includes
Installed
mounting hardware.
VT No. Year Belt Model
27-0185 2000-06 1.25”, 1.5” FX-FLST
27-1116 2007-17 20 mm FXST-FLST
27-1119 2007-17 1” FLST
27-1120 2008-17 20 mm FXST
ST Full Belt Guard
27-1116 Installed
Chain Guard fits 1984-85 FXST

VT No. 27-1588 Shown Installed
models with rear chain.
VT No. 27-1575 Full Rear Belt Guard fits 1985-99 FXST-FLST.
VT No. Finish
27-1588 Chrome
27-0198 Black
Chrome Belt Guard
Kits include pulley cover
with upper and lower belt
27-1567 guard for Softail models.
VT No. Fits Teeth

27-0242 27-0157 1986-99 70
27-0158 1990-99 65
27-0159 2000-06 FLST Only 70
27-0161 2006 FXST Only 70
27-0160 2007-17 FXST and FLST 66
27-1571
27-1649 27-1614
20-0241 20-0240 27-0544

27-1704
FXST-FLST Upper and
Lower Belt Guard Mount
27-1576 27-0687 Kit.
20-0249 VT No. Item
27-0519 Kit 1986-99
27-1115 27-0544 Kit 2000-17
27-1118
28-0154 Rubber Grommet
27-0480 12-0549 “Tee” Nut
37-0546 Acorn
Chrome Rear Belt Guards for FXST-FLST.
Chrome Lower Belt Guards for belt drive 1986-up FLST-
VT No. OEM Fits Teeth
FXST models. Note: Pulley tooth size.
27-1567 60533-86 1986-99 70
VT No. OEM Year Teeth Belt
27-0242 60571-98 1990-99 65 Wide Tire
27-1649 60394-90 1990-99 61 1.5”
27-1571 60537-89 1990-99 65
27-1704 60389-97A 1989-99 65 1.5”
20-0241 60533-00 2000-05 70
27-1576 60366-89A 1986-99 70 1.5”
20-0249 60576-06 2006-17 70
27-1614 Louvered 1986-99 70 1.5”
27-0480 60550-08 2008-17 FXWC
20-0240 60316-00 2000-05 70 1.5”
27-0687 60317-06 2006 70 1”
27-1115 60655-07 2007-17 66 20mm
27-1118 60654-07 2007-17 70 1” 289
Front Fender
50-6062 Raw Steel Fender fit 41mm
FXST models, 4” wide for 21”
wheels. 50-0266 50-0265
VT No. 50-6062
Steel Front Fender fits 2006-17 FXDWG-FXD with 49 mm
forks.
VT No. Year Model
50-0125 50-0266 2006-17 FXD
50-0265 FXWG
50-0125
Installed Chrome Steel Front Fender
and replaces 59876-00. Fits 2000-up
Painted FXSTD.
VT No. 50-0200
50-0200
50-0878
All Fenders are 50-0126
Steel!
50-0764 Smooth Sides
50-0114 50-0114
50-0876 50-0882
Fat Kid Steel Front Fenders fit 16” wheels on Glide Forks.
Glide Type Fenders are plain unfinished where noted. VT No. Fits
Fenders include chrome or raw braces riveted on. Fit 19” and 50-0764 1986-99 FLSTF, 1980-99 FXWG-FXST
21” tires only. 50-0878 1986-99 FLSTF, 1980-99 FXWG-FXST, Smooth
1980-up Wide Glide and Softail 50-0876 2000-up FLSTF
VT No. Fender Bracket 50-0882 2008-up FXDF
50-0125 Plain Chrome
50-0114 Spring Type Raw Chrome
Chrome Fender Mounts are

.750 thick to mount custom fend-
ers to Wide Glide forks.
VT No. 50-0579
Luggage Rack
50-0133 50-0195 50-0588 50-0589

Bolt On Luggage Racks mount to side straps of sissy bar as noted, A= Rigid
Side Plate B= Detachable Side Plate. Rack area measures 8.5” x 7.75”.
VT No. Model Type
50-0588 2006-17 FXD A and B
2000-17 FXST
50-0589 2002-05 FXD A
Chrome Sissy Bar Luggage Rack of solid steel

50-0281 50-0883 fits all 16” tall sissy bars and has a unique design
for easy installation or removal. Mount holes are
Rounded Front Fender is rolled on edge and in front. The
2⁵⁄₈” center to center. May require drilling for some
brackets are not included.
applications.
VT No. Type VT No. 50-1011
50-0133 Chrome (drilled)
50-0195 Plain
50-0281 Rib
50-0883 Smooth
Note: All Items Shipped with a Raw Finish may

have some oxidation (rust on surface)!
290
Glide and Springer Front Fender
50-0176
BIG TWIN
50-0268
50-0176
Installed
50-0868
50-0753
Front Fender and Bracket for 2008-up

FLST SB. Sold separately.
VT No. Item
50-0868 Fender
50-0864 Bracket
50-1568 50-0883
50-1075
50-0358 50-0769
Plain Front Fender is 6” wide, to use

with 16” wheels less brackets.
50-0570
50-1074 VT No. Type
50-0769 Flat
50-2011 50-0883 Round
Front Fender Mount
Kit attaches fend-
er to original style
50-0473 assembly.
Glide Front Fork Fenders for FLST,
Fenders for FXSTS models for use with
FLSTN.
21” wheels. Fenders are raw with raw
VT No. Fits VT No. Year Model Finish
brackets unless noted.
50-0753 1986-up FLST, 1986-99 FLSTN 50-1087 1986-up FLST Chrome
1989-92 1993-up
50-1075 Without trim holes 50-1085 1984-93 FXST Chrome
50-0268 50-0570
50-0358 2003-up FLSTC 50-1088 1994-up FXST Chrome
50-1568* 50-2011*
50-1074 1980-up FXST-FXWG with acorn nuts
50-0176* 50-2012
50-0473 1986-up FLST Slim Only 37-0895 1980-up FXST Zinc
50-1204** *Note: Chrome brackets
ALL FENDERS ARE SHIPPED BARE METAL
37-1011 1988-92 FLT Zinc
**Note: Chrome Fender w/ 50-0688 1993-up FXSTS Chrome
AND ARE FACTORY RIVETED TOGETHER
EXCEPT WHERE NOTED. chrome brackets
37-6368 37-6369
50-0910 50-0909 Replacement Fender Rivets fit all FL
Fender Bracket Sets mount stock or uni- front and rear fenders, 25 pack.
50-0794 versal fenders to Wide Glide or FX type VT No. Fits
forks, pair, chrome. 37-6368 Fender Brace
VT No. Model 37-6369 Fender Top
50-0910 1948-84 FLH
50-0909 1980-up FXST-FXWG,
1973-up FX-FXR
Zinc Plated Steel
Spring Fork Style Front Fender fits 18”, Bracket used to adapt
19” and 21” wheels. Brackets must be one piece FXDF front
fabricated. fenders to fit FLH forks
VT No. Style on 1949-up 41mm
50-0780 Stock Width models.
50-1147
50-0794 Narrow Width VT No. 50-1148 Springer Front Fender to fit 1997-up
Note: All Items Shipped with a FLSTS models. Replaces 59164-97.
VT No. Item
Raw Finish may have some oxi- 50-1213 VT
dation (rust on surface)! 50-0680 Bushings
291
Front Fender fits All Fenders are Steel!
35 & 39 mm Fork
Front Fender stock type for 1970-
up FX-FXR, in raw steel, has
chrome tubular type brackets rivet-
ed in place.
VT No. Years
50-0789 1984-91
50-0789 2531-12 Mount Bolts
50-0122 37-6370 Stainless Steel rivets,
50-0136 25 pieces
50-1055 50-1050
50-0123 50-0164 50-1049
50-0889 50-0915
50-0165 Chrome Fender Tips are stamped or smooth. Fits fender

width as noted.
VT No. Style Width Type
50-1055 Eagle 4” XLS
50-1050 Smooth 4” As Above
50-1140 50-1049 Smooth 5” FX
50-0915 Eagle 5” FX
Narrow Type Front Fenders for 35 or 39mm forks feature 28-0701 28-0702
a raw or chrome steel fender with brackets riveted on to fit
19” wheels. 50-0122 fits 19” wheels on 1973-90 XLX models,
50-0164 fits 1973-up models with 21” wheel and 1991-up with
19” or 21” wheel.
VT No. Finish Brackets VT No. Finish Brackets Plain Rubber Mud Flaps. Stock type for front and rear fend-
50-0122 Plain Chrome 50-0165 Raw Raw
ers for Big Twin.
50-0136 Plain Raw 50-0889 Raw Raw
VT No. Color
50-0123 Chrome Chrome 50-1140 Raw Raw
28-0701 Black
50-0164 Raw Chrome 28-0702 White
Stainless Steel Fender Medallion with
skull.
VT No. 50-1137
LTD Style Fender is designed with Chrome Front Fender Allen Head
slotted mounting holes enabling it Screw Kit contains all the necessary
to fit most narrow forks. Features a screws for mounting front fender brackets
raw finish with chrome barckets to fender replacing the bracket to fork
VT No. 50-0130 legs. Use on all 1973-up FX stock type
front fenders. VT No. 37-6367
Springer Style Fender fits 1973-up 35 and 39 mm models.

with 19” or 21” wheels.
VT No. 50-0116
Fender Rivets fit 1973-up FX-XL
models, stainless, 25 pack.
VT No. 37-6370

292
FXDWG
Bobbed Rear
Fender for FXST
BIG TWIN
FXST Style Rear
Fender Kit includes
50-0207 steel fender, chrome
struts, chrome license
plate bracket and tail
lamp with hardware.
Fits 1984-99.
VT No. 50-0564
50-0746
50-0587
50-0783
50-0849
Rear Fender fits stock struts, does not have reflector indents.
50-0585 VT No. Item Year Model
50-0783 Fender 1984-99 FXST
Bobbed Rear Fender for FXDWG models. 50-0746 Fender 1986-99 FXST
VT No. Year 50-0849 Fender 2006-17 FXST
50-0207 1996-01
50-0587 2002-05
50-0585 2006-09 9” Wide Steel Rear Fender
All Fenders are Steel!

Bobbed Style fits FXST struts
when used on 1986-99 wide
style frames for 200 series
tire. Sold without holes.
FXR VT No. 50-0112
Rear Fender
50-0518
Extension for
FXST-FLST to
replace stock plastic
extension. Flat panel
design for 2000-07.
50-0517
VT No. Finish
50-0517 Stainless
50-0518 Chrome
FXR Stock Type Rear Fender fits 1981-94 FXR-FXRS mod-
els. VT No. 50-0768
50-0515
31-0160 31-4012
Chrome Rear Fender Extension replaces stock plastic exten-

sion. Fit 1986-99 FXST-FLST. This is the curved style.
VT No. 50-0515
Tail Lamp Bracket Kit
VT No. Item
31-0160 Stock Tail Lamp Bracket
31-4012 Cateye Tail Lamp Bracket Note: All Items Shipped with a Raw Finish may
293
FLST Rear Fender All Fenders are Steel!
50-0593 50-0594
50-0767 50-1021
FLSTF Style Replacement fits FLST-FXST models. Accepts

Note: All Items Shipped 33-0301 tail lamp. One piece design.
with a Raw Finish may 50-0593 2007-17 Replica
have some oxidation 50-0594 2007-17 Plain
50-0586
(rust on surface)!
FLST Replacement Rear Fenders. Can also be used on all

1986-up Softail models uses 33-0301 tail lamp and includes
indent for turn signal bar. 50-0767 does not have tail lamp cut
or indents for signal, for use with custom tail lamp. 50-1118
VT No. Year Type 50-1119
50-0767 1986-99 Smooth 50-1118 50-1119
50-1021 1986-99 Replica
50-0586 2006-17 Replica
Chrome Fender Tips fit 1990-2006 FLSTF models.

Smooth Set Wing Type Size
50-0515 50-1118 50-1230 50-1680 Front 6¹⁄₂”
FXST-FLST Rear Fender Extension to replace stock plastic 50-1119 50-1233 50-1681 Rear 7”
extension.
VT No. Years Finish Type
50-0515 1986-99 Chrome Curved 50-1182 50-1183
50-0517 2000-17 Stainless Flat Panel Rear Fender Tips fit 2007-17 FLSTF.
50-0518 2000-17 Chrome Flat Panel VT No. Type
50-1182 Smooth
50-1183 Ribbed
Fender Ornaments
48-0135
50-1537
50-1536
48-0136
48-1538
48-1790
48-1546
48-0246
Fender Ornaments. Fender must be drilled for installation.
VT No. Type
50-1537 Flying Skeleton
50-1536 Skeleton
48-0135 Reaper
48-0136 Bat
48-0246 Hand
48-1538 Wheel Devil
48-1546 Skull
48-1790 Bronze Patina Eagle
294
Strut for ST models
BIG TWIN
50-1070 50-1071 50-2042
50-1069
50-1208
50-2040 50-2039 Installed 50-0862
50-0649 50-0861 50-0863 50-0861

FXST models. 50-1208 Replica 2003-05 FLSTF models.
50-1070 Replica 1986-99 50-2039 Smooth 2003-05 50-1071 Replica 1986-99
— Smooth 50-0649 Replica 2006-17 50-1211 Replica 2000-02
50-2040 Replica 2000-02 50-0651 Smooth 2006-17 50-1208 Replica 2003-07
50-0862 Replica 2008-17 50-0862 Replica 2008-17
50-0861 Inner Strut 2008-17 50-0863 Smooth 2008-17
50-0861 Inner Strut 2008-17
FXD-FXR
50-1071 50-1064 50-1106
50-1211
50-0649 50-0852 50-1115
50-1123
Fender Strut Sets with signal and mount holes.
50-0865 Chrome Polished Fits Type
50-0652 50-1064 50-0286 1982-86 FXR Strut
FLST Models 1983-91 FXRT-FXRP Strut
50-1071 Replica 1986-99 50-1106 50-0285 1987-94 FXR except Strut
61-0228 Chrome 1986-99 FXRT-FXRP Strut
Three Hole 50-1115 1997-06 FXDWG Cover
61-0228 50-1123 2007-17 FXD Cover
50-2042 Replica 2000-02
50-0649 Replica 2007
50-0652 Replica 2008-17
50-0865 Inner Strut 2008-17
31-0652 Rear Fender Nut Inserts, 4 pack
Strut Bolt Set

Chrome Allen Fender Strut Bolt Kits include Fender Strut Mount Kit includes chrome socket
necessary allen head bolts, washers and nuts bolts, special nuts, washers and pasties chrome
for fender mounting. covers to match cylinder head bolt dome covers.
9920-46 VT No. Year Model Fits 1986-99 FXST. VT No. 37-8907
37-8978 1986-99 FXST 9920-46 9921-56
9920-46 1986-99 Softail (Four hole strut)
9921-56 1986-99 (6 hole Strut)
2044-26 2000-02 FXST
9921-46 Rear Fender Strut Chrome Mounting Kit are unique low profile
2000-03 FLST
allen hardware kits to mount struts to fender.
Chrome Rear Fender Support Mount Kit VT No. Item
to replace original hardware. 9920-46 Mount 4 hole struts on 1986-99 5-speed
VT No. Year/Model Style Heritage Softail and Fat Boy, pictured.
37-8978 1986-99 FXST Allen 9921-56 Mounts 6 hole struts on 1986-99 FXST, FXSTC,
2045-34 2045-34 2000-02 FXST Acorn FXSTS and Bad Boy.
2000-03 FLST 2043-26 FX,FXST and FL Softail 2000-03 except FX Deuce
2497-38 2003-17 FXST, 2004-17 FLST
295
Fender
50-1171 50-1162 50-1173
50-1084
Installed
50-1172 33-0657 50-1025

FLST Front Fender Tip Lights
Chrome Front Fender Rails
LED Bulb Lens Color Fits
50-1171 50-1162 Amber 2000-up fit 1984-up FL style front fend-
50-1173 50-1172 Smoke 2000-up ers. Includes mount stanchions
33-0657 50-1025 Amber 1986-95 and template. VT No. 50-1084
33-2081 33-2083 33-0134
15-0695
Replacement Parts for 1986-up Front Tips

33-2081 Amber Lens only
33-2083 As Above w/Blue Dot
15-0695 Gasket 50-1016
50-1016 50-2016
33-0134 Wedge Bulb Installed
50-1161 Chrome Rear Fender Rail fits 1986-up models. Features
three point mounting.
VT No. Years
50-1163 50-1178 50-1170 50-1016 1986-99
50-2016 2000-up FLST, FLSTC
Chrome Front Fender Trim
Rail fits 1987-17 FLST,
FLSTC & 1993-1996 FLSTN.
50-1166 50-1167 50-1168 50-1169 VT No. 50-1051
FLST Rear Fender Tip Lights
Bulb LED Lens Color Fits
50-1163 50-1178 Red 2004-up Front Fender Chrome Trim Rail Set mounts
50-1161 50-1170 Red 1999-03 on top of Glide style fenders.
50-1166 50-1167 Amber 1999-03 VT No. 50-1534
50-1168 50-1169 Smoked 1999-03
50-1534
Speed Nuts.10 pack.

33-2082 33-0134 VT No. 37-8842
Replacement Parts for 1986-up Rear Tips Fender Trim Bumper Mount Bracket fits 1997-
33-2082 Red Lens only 2003 FLSTS and 2005-07 FLSTC. U-shaped.
15-0694 Gasket VT No. 31-1231
33-0134 Wedge Bulb
50-1041 50-1062
FLST Rear Bumpers with origi-

nal cabbage cutter design grill.
VT No Grill
50-1041 With
50-1062 Without
296
50-0681 50-0682
Fender Tip
50-0690 50-0690
BIG TWIN
Chrome Die Cast Fender Tips fit 1997-up FLSTS.
VT No. Fits
50-0681 Front
50-0682 Rear
50-1214 Set (Front and Rear)
50-1015 50-1066
50-0693 50-0698
Chrome National Tips. *Note: All are chrome cast excepted
where noted.
VT No. Fits
50-1221 50-0690 Front front 2002-13 XL, 1980-85 FXWG,
50-1132
and front back 1984-13 FXST, 1983 FXDG
50-0693 Rear 2001-06 FLST
50-0698 Rear 2006-12 FXST
50-1118 50-1119
50-1133
Lower Front Fender Trim includes screws except 50-1133
and 50-1015. Fits 1986-up FLST and 1980-13 FLT.
Chrome Black Type
50-1015 Smooth Chrome Smooth Fender Tips fit FLSTF models.
50-1066 Ribbed VT No. Type Size
50-1220 50-1221 Ribbed, Note: 2014-up FLT 50-1118 Front 6¹⁄₂”
50-1132 Flamed 50-1119 Rear 8”
50-1133 Plain 50-1182 50-1183
37-1508 Screw Kit
Rear Fender Tips fit 2007-up FLSTF.

VT No. Type
50-1182 Smooth
50-1183 Ribbed
Chrome Gold Chrome Gold Style

50-1049 50-0915
Eagle Eagle Eagle Eagle with 50-1050
50-1055
with with with Black
Chrome Chrome Black Tip Tip Chrome Front Fender Tip is stamped or smooth. Fits fender
Tip Tip width as noted.
VT No. Style Width Type
50-1587 50-1588 50-1589 50-1590 Front
50-1055 Eagle 4” FXWG-FXST
50-1591 50-1592 50-1593 50-1594 Rear
50-1050 Smooth 4” FXWG-FXST
50-1049 Smooth 5” FX
50-0915 Eagle 5” FX
50-1545 50-1546 50-1548

50-1549
Chrome Black Tip with Style

Tip with Chrome Skull
Black Skull
50-1569 50-1570 Front Front Fender Lower Trim fits 2014-up FLH.
50-1571 50-1572 Rear Chrome Black Type
37-8784 50-1545 50-1548 Smooth
50-1546 50-1549 Flame
50-0957
Replica Fender Side Trim Set fits 1982-up FLT, 1986-up FLST.
VT No. Item Finish
50-0957 Side Strips Stainless
50-0531 Side Strips Chrome
37-8784 T-Bolts
297
1¹⁄₄” Engine Bar 51-0877
FOR ENGINE BARS LISTED ON THIS PAGE

WARNING: THESE ENGINE/FRAME BARS MAY PROVIDE LIMITED LEG AND COSMETIC VEHICLE PROTECTION
UNDER UNIQUE CIRCUMSTANCES (FALL OVER WHILE STOPPED, VERY LOW SPEED SLIDE). THEY ARE NOT
MADE NOR INTENDED TO PROVIDE PROTECTION FROM BODILY INJURY IN A COLLISION WITH AN AUTOMO-
BILE OR ANY OTHER OBJECT.
51-0891
51-2080 FXST
51-0891 1984-99 Front, no pads
51-0877 2000-05 Rear, no pads
51-0995 31-9888 Engine Cross Bar
51-2083 31-9888
FXSTC/FXTS/FXSTD
51-0897 51-0999 51-2083 2000-17 Front, built in foot rest
51-0887
51-0990 50-2070 FXR

51-0887 1982-94 Front, no pads
Replacement Parts
28-0852 Rubber Pads
31-9988 Lower Mount with clamps FX-FXST
51-0870 14-0977 Replacement O-Ring for Above
51-1046 Front or Rear Highway Bars
51-0872 51-0997
51-2076
51-2060
FLST 51-0987 50-2077
Chrome Black
51-0995 51-0999 1986-99 Front with footpeg pads
51-2080 1986-99 Front with footpeg pads
51-0897 1986-99 Front, no pads FXD/FXWG Continued
51-0990 2000-17 Front with footpeg pads
51-0872 2006-17 FXD-FXDWG, rubber pads
50-2070 2000-17 Front Note: Lindby
51-1046 2000-17 Front, no pads with mid or forward controls, Note: Black Finish
51-0990 51-0870 2000-17 Front with footpeg pads 51-0987 2006-17 FXD-FXDWG, no pads
51-0877 2000-17 Rear with mid or forward controls
51-1068 51-1069 2018-up Front 51-0997 2006-17 FXD-FXDWG, rubber pads
51-1066 51-1067 2018-up Front, no pads with mid or forward controls
50-2060 1986-99 Front Note: Lindby 50-2077 2012-17 FLD (Switchback), rubber pads
51-2076 1986-99 Front, footpeg pads Note: Lindby
51-0882 51-0879
Black Signal
Engine Bar features built in amber LED lights to work as turn

FXD/FXWG signals.
51-0882 1991-05 without forward controls, no pads Chrome Black Fits
50-2062 1991-17 built in O-Rings Note: Lindby 51-0017 51-0018 2000-17 ST
51-2081 1991-17 with footpeg pads 51-0019 51-0020 2006-17 FXD
51-0879 1993-05 FXDWG Dynaglide, no pads
51-2052 1986-99 FLSTC Note: Black Finish
298
FXR-FXD Shocks
FXD
BIG TWIN
Lower
AEE Series Shock Sets are
nitrogen charged with multi stage Shock
dampening and adjustable spring
load. All shocks are measured
All shocks are
eyelet to eyelet and feature measured eye-
chrome springs and caps with let to center of
black body. *Note: Denotes stock eyelet.
length. 54-0164 54-0168
FXD-FXDWG Shock Set will lower bike. Center to center dis-
Fits 11” 11.5” 13” 13.5” 14.25 tance noted. Fits 1991-17. Stock shock length is 12.5”.
1983-94 FXRT 54-0020 54-0021 54-0023* 54-0024 54-0025 Chrome Black Year Length
1984-94 FXRD 54-0020 54-0021 54-0023 54-0024 54-0025 Mount Studs not
54-0164 54-0170 1991-17 11.5” included with shock
1987-94 FXRS-FXLR 54-0020 54-0021 54-0023* 54-0024 54-0025 54-0168 1991-17 12”
1991-17 FXD 54-0135 — — — — sets.
Progressive Suspension 440 Series Chrome Shocks feature two rebound damping circuits and are available in standard for the average
single rider, heavy duty for touring or carrying passengers.
Model/Year 11.0” 11.5” 12.0” 12.5” 13.0” 13.5”
Heavy Heavy Heavy Heavy
Standard Standard Standard Standard Standard Standard
Duty Duty Duty Duty
FXR-FXRS-FXLR
54-4005 54-4006 — — — 54-4007 54-4001 — 54-4009 54-4003
1982-94
FXD-FXDWG 54-4039
— — 54-4053 54-4036 54-4044 54-4038 54-4048 — —
1991-17
B Progressive Suspension 412 Series Chrome Shocks are nitrogen charged

A with six-stage automatic damping and an adjustable spring preload. Available
with chrome spring and end caps, shock cartridge is black. All shocks are
measured eyelet to center of eyelet.
# Year/Model 11.0” 11.5” 12.5”
B 91-17 Dynaglide
— — 54-0038*
Note: A
A 83-94 FXRT 54-0093 54-0033 54-2000
A 85-94 FXRD 54-0093 54-0033 54-2000*
A 87-94 FXRS, FXLR 54-0093 54-0033 54-2000
*Note: Denotes stock length shock. When installing other than stock length shocks, tire to fender
54-0033 54-0038 clearances must be checked.
Warning: Installing a lowering kit or shorter shocks will Note A: 1991-92 Dynaglide have 12” stock shock length; 1993-04 except FXDS-CON have 12⁵⁄₈”
decrease initial ground clearance. The motorcycle will be stock shock length.
lower to the ground and care should be taken to avoid
bottoming, especially over bumps or in turns.
54-0514 54-0519
Chrome Upper Shock Stud Covers.
54-0513 VT No. OEM Fits
54-0533
54-0514 57408-88T 1982-94 FXR
54-0537 54-0519 54341-96 1991-99 FXD
54-0431 28-0231
9986-8
54-0537
Installed Lower Shock Stud Kit includes two nugget nuts and two
studs.
Black Rear Shock Lowering Kits lowers rear frame area.
VT No. Year Model OEM
Includes instructions, hardware and black brackets.
54-0431 1982-94 FXR-FXRS 1614
VT No. Fits Lowers
9986-8 1991-17 FXD 3958
54-0513 1991-99 FXD 1” Mount Studs not included 28-0231 1982-94 FXR Bushing, pair
54-0533 2000-05 FXD 1” with shock sets.
54-0537 2006-17 FXD 1”
299
FXST Shocks
Chrome Billet Shock Sets fit 1989-99
Softail models. Smaller diameter allows
more clearance for custom installation.
VT No. 54-0131
54-0161
FLST-FXST Shock Stud Kit
includes 4 bolts and 4 washers.
54-0162
VT No. Finish Year
37-9090 Zinc 1989-99 AEE Chrome Adjustable Shock Assemblies feature full
37-0476 Chrome 1989-99 chrome finish with up to 1¹⁄₂” lowering capability.
37-0475 Chrome 2000-17 VT No. Years
37-0475 54-0161 1989-99
54-0162* 2000-17
*Note: These do not lower the motorcycle, these are stan-
dard Softail shocks.
54-0570
Shock Tool 54-0571
16-0409
16-0100 “Full” Lowering Kits include components to lower the front

Shock Tools. and rear of Softail models. Each kit includes shorter damper
VT No. Model rods, 1” shorter kickstand and adjustable rear shock lowering
16-0409 1979-96 FXR set. The front of the FXST is lowered 2.5” and 2” on FLST
16-0100 1990-17 FXD models. Rear is adjustable up to 1.5” on 2000-06 models and
1989-17 Softail up to 2” lower on 1989-99 models, using stock shocks.
Shock Tool for use VT No. Year
with 3/8” ratchet 54-0570 1989-99
drive. 54-0571 2000-06
Softail Shock
VT No. 16-0917
Spanner replaces 54-0520 Lowering Kit allows 1.5”
94555-89. lowering. Fits 2000-17
VT No. 16-0748 Softail.
Chrome Adjustable Display VT No. Brand
Center Stand shows your bike 54-0520 AEE
with single lever on left side and 54-0538 ET
allows bikes to be lifted up on Adjustable Softail Shock Mount is for
stand. Very little effort required. all 2000-17 models. Installs on the stock
Entire assembly fits neatly under shock and offers easy adjustment from
frame rails. Two bolt installation. stock ride height to two inches lower.
16-1522 Fits 2008-17 Softail. *Note: With VT No. 54-0535
Caution: Not intended for adjustable height.
use as a ride off stand. VT No. 16-1522* Dual Shock Tool fits 1989-17 FXST
and 1979-up FX-XL.
VT No. 16-0954
Mount Studs not included with shock sets.
Bagger Warning: Installing a lowering kit or shorter shocks will decrease initial ground clearance.
Products The motorcycle will be lower to the ground and care should be taken to avoid bottoming,
especially over bumps or in turns.
300
Swingarm Components for FXR
BIG TWIN
44-2044
Swingarm Mounting Kit includes two bushing assemblies, 1982-94 FXR Kit. All are pieces included for ease of installation.
two spacers, two plastic retainer rings, two rubber isolators Updated Design. Rubbers are included. Controls lateral and tor-
and pivot shaft with locknut and all parts required to mount sional movement at pivot point. Close tolerance updated spheri-
transmission and swingarm to pivot block. Will work with stock cal bearings included
or aftermarket rubber mount swingarm frames for 1982-94 VT No. Item
FXR models. 44-0941 Kit
VT No. 44-2044 44-0960 Spacer Set
44-0583
44-2040 42-0030
44-2041 FXR Rear Axle Adjusters include heavy axle pull blocks and
44-2039 chrome end caps with allen screws, for 1982-94. Chrome
pivot covers also available.
VT No. Item
44-0583 Adjusters
42-0030 1982-89 Pivot Cover Set
31-0444 31-0452 31-0443
44-1991
Nylatron Swingarm Bushing Kit is a four piece bushing set
replaces swingarm bearings and stabilizes swingarm rubber
44-1984 mounts. Order pin separately. Order (31-3986 or 31-0443)
FXR Swingarm Rebuild Parts frame mount bushings separately.
VT No. OEM Year Item VT No. 44-0671
44-2044 Kit 1982-94 FXR
44-2039 47510-80 1987-97 Plastic Retaining Ring
44-2040 47511-80 1987-94 Spacer
44-2041 47513-80 1987-94 Nylon Washer
31-0444 47538-79 1982-94 Bushing Ring
31-0452 47556-81 1982-94 Bushing Assembly
31-0443 47564-86A 1987-94 Mount Bushing, each
44-2042 47491-89 1989-94 Cupwasher, 5 pack
44-1991 47492-89A 1989-94 Shaft
44-1984 47515-82A 1982-88 Shaft
Emissions and Noise Regulations
Important Information:
Disclaimer: The California Air Resources Board (CARB does not permit the use of aftermarket emission-related parts) that alter the performance
of OEM emission-related devices unless CARB has issued an executive order, other than on racing vehicles on closed course. Check your local
laws and manufacturer’s information.
Disclaimer: Emission related parts for OEM Non-emission control system equipped motorcycles as well as slip on mufflers that mount down-
stream of and which do not alter the performance of OEM emission-related devices, are considered legal replacement parts by CARB. More
California exhaust information is available a www. arb.aa.gov.
Disclaimer: Aftermarket products, including but not limited to exhausts, fuel, air controllers, air filter kits, camshafts and carburetors and jet kits
which alter, modify, or replace emission control devices or systems of an originally compliant highway motorcycle, are not legal for sale or street
use in California unless they have been issued a CARB Executive Order. Aftermarket emissions related products which have not been issued an
Executive Order or which are not aftermarket Replacement Parts, as defined in Title 13, California Code of Regulations, Section 1900 (b)(2). are
authorized for closed circuit race use only. Products shown may be designed, manufactured, intended and sold for closed circuit race use only and
use of the same on public roads or lands may be a violation of local, state and/or federal laws. See manufacturer’s information and state and local
laws to determine what is authorized for your use on your vehicle.
Disclaimer: Products shown may not conform to federal, state or local noise regulations.
Warranty
Disclaimer: There is no warranty on exhaust pipes and mufflers with regard to any discoloration. Discoloration (blueing) is caused by tuning char-
acteristics, i.e. cam timing, carburetor, etc. and is not caused by defective manufacturing.
Disclaimer: Check your applicable laws and manufacturer’s publication(s) and/or website(s) for manufacturer’s warranty, maintenance, safety,
mounting and any regulatory compliance/non-compliance information.
301
1986-99 ST Swing Arm
Chrome Rear Swingarm & A
Softail Frame Brackets to be
welded on.
Shock Assembly VT No. Item
51-0583 Circuit Breaker (B)
Chrome Rear
Swingarm and Shock
Assembly fits Softail B
models. Includes
chrome tail section, Neck Lock Tab welded on 1965-84 Big
adjustable shocks with Twin frames.
1” lowering capability, VT No. 51-0517
chrome axis tube with
tapered allen screws
and chrome shock
mount bolts.
VT No. Year
51-0651 1986-99
Frame Covers for Softail

Chrome Rear Frame Covers contoured to Smooth Frame Trim Set fits FXST-FLST. Easy
fully cover rear castings on 1986-99 FXST- to install chrome plated trim plates fit into recess-
FLST Softail frames. Covers are securely es on rear of frame near swingarm pivot. Comes
fastened by bolting under rear strut arms, with double-sided adhesive on back.
foot peg bolts, swingarm pivot bolts and VT No. Year
fastens on lower right under muffler brack- 42-0038 1987-06
et. VT No. 42-0001 42-1531 2007-17
42-1534 2000-06 FXST
Chrome Softail Rear Frame
Chrome Frame Insert Set covers area on
Covers bolt on to cover axle
neck of Big Twin frames 1948-Early 88 with
adjuster area on all 1986-99 Softail
key lock. Easily attached with adhesive pads
frames. Hardware and instructions
provided. Available in pairs.
included.
VT No. 42-0056
VT No. 42-0034
Chrome Tail Spurs dress up rear castings
42-0676
on 1986-99 FXST-FLST models. Contour
steel covers fit behind adjusters to protect
paint when axle is removed. Adjuster nuts
supplied.
VT No. Item
42-0676 Spurs
44-0545 Adjuster Kit
302
Chrome Rear Frame
Section for Softail models.
Includes the pivot bearings
1987-99 Softail
Rear Swingarm
BIG TWIN
installed.
VT No. OEM Years
51-0969 49231-97 1989-99
44-0585 Pivot Kit 1987-99 B
B
D
51-0969
A C A
C
FXST-FLST Frame Rubber
Bumper with ¹⁄₄” x 20 thread.
Replaces 11451, pair.
Chrome Rear Pivot Kit. Fits 1987-99 FXST-FLST. Order hard-
VT No. 28-0550
ware separately.
1989-99 FLST-FXST Shock Stud Kit VT No. # OEM Item
includes 4 bolts replacing 4074 and 4 44-0585 A, B, C, D Kit Kit
washers replacing 6724W. Zinc finish. 44-0584 A 9076 Bearing Kit, two pieces
VT No. 37-9090 12-9910 11156 Snap Rings, 10 pack
37-8824 B 4961 Tapered Allens, pair
54-0438 7142 Lockwasher for Above
37-8896 C 43283 Washers, pair
44-2000 D 48031-89A Axis Tube, Chrome
37-8824 42-9926
50-0515
Rear Fender Extension to replace
stock plastic extension. Fits 1986-
FXST Pivot Bolts and Covers fit 1986-99 Softail. Covers are
99 FXST-FLST. 50-0737 available in chrome dome or reflectorized. Allen cap screws
VT No. Finish Type
replace existing bolt. Pairs.
50-0515 Chrome Curved
VT No. Type Item
50-0737 Stainless Flat Panel
37-8824 Chrome Tapered Allen Bolts
Pike Swingarm Pivot Bolt Set 51-0971 Chrome Stock Hex Bolts
includes chrome pike nuts and 54-0438 Lockwasher for Above
studs for 1989-99 Softail models. 42-9926 1986-99 Chrome Dome Cover
VT No. 37-0330 8940-2 1986-99 Red Reflector Cover
8939-2 1986-99 Amber Reflector Cover
1991-99 Softail Wide Right Side Drive Swingarm in con-

junction with parts listed allows use of 280-300 rear tire with a
1.5” belt. Swing arm is 2” longer than stock Softail tail section
includes adjuster and 1” axle.
Chrome Steel Strut Bars VT No. Item
will allow use of a 11” wide 51-0705 Wide Swing Arm
fender on Softail frames. 20-0375 70 T Pulley
VT No. 50-0583 50-0242 Strutless Fender
20-4010 Belt, 1.5 x 136T
50-0583 Strut Set
51-0705
Fit and space curved strut set, 50-0583, to stock Softail style frame. Allows
use of 11” fender, swing arm, 51-0705 swing arm, 280 x 18 Metzler tire and
GMA brake pulley combo, 23-4537, and 1.5” belt.
303
2000-17 Softail
Rear Swingarm
44-0663
44-0608 51-0978 51-0979
Rear Frame Chrome Section. Order pivot kit separately.
For 2000-05 FXST and 2000-07 FLST
42-0686 VT No. OEM Finish Brand
51-0978 48442-00 Chrome V-Twin
44-0588 For 2006-07 FXST
2000-17 Swingarm Hardware. 44-0588 Pivot Kit Chrome V-Twin
VT No. OEM Item For 2006-07 FXST, 2007 FLSTF
44-0608 47610-00 Chrome Pivot Shaft 51-0979 48607-06 Chrome V-Twin
44-0623 45048-00 Bushing, pair 44-0739
44-0624 48049-00 Spacer, pair, 2000-06
44-0625 9270 Bearing Only, 2000-17
44-0588 — Rear Pivot Kit
44-0588
44-0663 47119-02 Pivot Kit
44-0626 11282 Retaining Ring 44-0726
44-0627 6535 Left Side Pivot Washer
44-0629 6534 Right Side Pivot Washer
44-0748
42-0686 43462-00 Dome Cover Set, 2000-07 Chrome
2780-2 47660-09 Dome Cover Set, 2008-17 Chrome Chrome Softail Pivot Assembly includes shaft, nut and spacers.
37-0960 7479 Nut Only VT No. Item Year
Softail Rubber Bumper for 2000-up replaces 11514. 44-0739 Flush Mount Shaft 2000-06
VT No. 28-0587 44-0588 Complete Kit 2000-06
44-0726 Shaft Kit 2000-06
Pivot Spacer Sets fit 44-0748 Shaft Kit 2008-17
Softail models (4 piece). Chrome Plated Rear Fender Strut
44-0710 44-0712 VT No. Year Finish Mounting Kit is a unique low profile
44-0710 2000-06 Zinc allen hardware kits used to mount struts
44-0712 2007 Zinc to fender.
44-0711
44-0711 2008-17 Zinc VT No. Fits
2043-26 2000-03 FLST, 2000-02 FXST
FXST-FLST Rear Fender 2497-38 2004-17 FLST, 2003-17 FXST
Extension to replace stock
plastic extension. Flat panel
50-0517 50-0518 design for 2000-10.
VT No. Finish Year
50-0517 Stainless 2000-07
50-0518 Chrome 2000-07
Skid Plate
42-0101 42-0098
42-0117
Steel Skid Plates replace 24490-36. Fit 1936-99 Big Twins.

VT No Finish
42-0101 Chrome
42-0098 Stainless
42-0117 Black
304
For FXD-FXDWG Swingarm
FXD Swingarm Rebuild Parts. Fit all 1991-17 Dynaglide.
BIG TWIN
VT No. # OEM Item
F
I 44-0555 A-J 1991-99 Complete Kit
D 44-0605 A-J 2000-05 Complete Kit
C
G 44-0790 2006-up Complete Kit
E
A 37-8661 A 534 1991-99 Cotter Pin
C 37-0564 B 7734W 1991-99 Nut
H B
14-0515 C 11139 1991-up O-ring
44-0590 D 41585-90 1991-17 Dust Shield
12-0360 E 47082-81 1991-03 Bearing Assembly
J 44-0555 44-0591 F 47496-90 1991-17 Spacer Left Hand
44-0592 G 47499-90 1991-17 Spacer Right Hand
D F G E 44-0593 H 47565-90 1991-99 Washer
C 44-0594 I 47624-90A 1991-17 Bushing
44-0595 J 47817-90 1991-99 Pivot Bolt
44-0606 J 47817-00 2000-05 Pivot Bolt
C 44-0758 J 47641-06 2006-17 Pivot Bolt
H
J 27-0861 2006-17 Chrome Peg Mount Set
fits FXD-FXDWG models. Order
44-0605
male pegs separately.
VT No. Item
44-0790
27-0858 Mounts Stock Height
27-0861 Mounts, Raised Height
27-1232 Peg Set
Hard Tail for 27-0475

Installed
FXD
51-0786 Left
27-0475
Installed
27-0475
51-0786
27-0439
1994-05 Rear Footpeg Mount Kit includes right and left

bracket. Order pegs separately.
VT No. Item
27-0475 Mount Kit Only
27-0439 Mount Kit with pegs
Rear 1990-17 FXD Driver Footpeg
Side
Mounts Set
VT No. 27-0804
Bolt On Hard Tail Units to 1990-98 FXD-FXDWG models. 27-0804

Use stock rear wheel or fit up to 200mm width. Order battery
box separately. Bottom attaches to swingarm pivot point to aid
in alignment.
VT No. 51-0786
Note: Attachment points, we recommend installation be com-
pleted by a qualified technician.
305
Exhaust 30-0318
Exhaust Sets feature “Quad
Finishing” which includes triple
dura nickel and chrome as the final
finish. After chrome plating, pipes
are normalized and dried @572° F
for the final finish process.
Full Coverage Formed Heat Shields Included!
30-0318 Installed
with footboards.
Includes full coverage heat Softail Short Stuff Pipe Set features 13/4” headers with full
shields and chrome end caps
coverage 2¹⁄₄” heat shield set. Fits 1986-06.
VT No. 30-0517
30-0318 shown with full cov- 30-0517 includes full coverage

erage heat shields. heat shields and chrome end 30-0541
caps
Before Starting Engine wipe

all fingerprints off exhaust
30-0541 pipes after installation. Oil
from hands will leave perma-
nent marks on chrome finish.
Maxx-shot Softail Exhaust Set features 1³⁄₄” headers with X Series Pipe Sets fit right or left side drive applications.
full coverage 2¹⁄₄” form fit chrome heat shields. Fits 1986-06 Chrome Black Style Size Bracket
FXST and FLST with or without footboards. Includes mounting 30-0541 X 2¹⁄₄” 31-1576
bracket and removable baffles.
VT No. 30-0318 Before Starting
Six-Gun Pipe End Set. Wyatt Engine wipe all
Gatling’s end tips fit pipes with fingerprints off
2¹⁄₄” full coverage heat shields exhaust pipes
after installation.
over 1³⁄₄” pipes.
Oil from hands will
VT No. 30-0576 leave permanent
marks on chrome
30-0542 finish.
Venom Style Drag Exhaust Pipe Set has straight cut ends
with a 2-1/8" diameter and features a "fog" black 500°F finish!
30-0789 30-0788 Fog Black Chrome
500 °F
Six Gun Pipe Ends.
30-0602 30-0542
VT No. Fits (Outer Diameter)
30-0791
30-0789 2¹⁄₄” 30-0791
30-0788 1³⁄₄” Installed
30-0453
Installed
Chrome Billet Exhaust Ends.
30-0453 VT No. Fits Chrome Billet Scalloped Pipe
30-0791 1³⁄₄” Ends fit 2¹⁄₄” outer diameter
Chrome Billet Ends fit 2¹⁄₄” outer diameter straight pipes.
30-0790 2¹⁄₄” straight pipes. Sold as a pair.
VT No. 30-0453
VT No. 30-0313
Important Note: Some items on this page may be emission-related parts subject to California or other emission control laws. Please
see note on for important information regarding emission control regulatory compliance and warranty information.
306
Note: Wyatt Gatling Exhaust Set features “Quad Finishing”
which includes triple dura nickel and chrome as the final
finish. After chrome plating, pipes are normalized and dried
2” Exhaust
BIG TWIN
@572°F for the final finish process.
30-0295 Installed
Chrome Wyatt Gatling Pipe Set features full curve with 2”

outside diameter for Softail models in Rigid or Softail frame.
Bracket included. Fits 1984-06. VT No. 30-0295
Pirate 2” Curve Pipe Set fits 1986-06 Softail/Evolution and

TC-88.
VT No. 30-0320
2 into 1 Exhaust ST True Dual’s

Chrome 2 into 1 Heat
Shield Set. Fits 1986-99 29-1169 Installed
FLST when an early FL
look is desired.
VT No. 30-0334
FLST-FXST Fishtail Dual

Exhaust Kit by Paughco fits
29-1154 all 1995-up models. Available
with Fishtail ends only with
or without mufflers. Complete
with clamps and mounting
hardware. Includes shift rod
where required. 1³⁄₄” outside
diameter use with 30-0293 heat
shield set.
VT No. Type Year
29-1154 Pipe Set Only 1987-99
30-0002 30-0003
Custom Exhaust Donut is used to create custom exhaust 29-1169 Crossover Set (left)
systems. The full 360° bends allows for just the right angle cut. True Dual Chrome Exhaust Systems feature a single pipe
Sold as each. for each side. Each pipe is independent and has 1³⁄₄” outside
VT No. Size ID OD diameter. The rear pipe is for the left, and the front pipe is for
30-0002 1³⁄₄” 1⁷⁄₈” 5¹⁄₄” the right without intersection.
30-0003 2” 2¹⁄₈” 6” VT No. Fits
29-1169 1995-99 FXST-FLST
29-1190 2000-06 FXST-FLST
31-0815 Bracket, Each
307
Exhaust Before Starting Engine wipe all fingerprints off
exhaust pipes after installation. Oil from hands
will leave permanent marks on chrome finish.
2”
30-0460
1³/₄”
30-0469
30-0464
30-0543 Installed
30-0469
Wyatt Gatling Down Draft Drag Pipe Set available in black

or chrome finishes. These pipes have 18mm O² sensor bung
30-0543 plugs for non-EFI applications. A cross bracket connects the
Chrome Wyatt Gatling Stack Pipe pipes together for added support. Order baffles, flange rings
Set fits left and right side drive, 1985- and flange gaskets separately. Fits 1986-up FXST, FLST,
2006, 2¹⁄₄”. 1991-10 FXD and 1986-13 with forward controls only.
VT No. 30-0543 Chrome Black O.D.
30-0460 30-0464 2”
30-0469 1³⁄₄”`
Pipe Bracket mounts to cam cover on
Evolution and TC-88 models for 30-0544.
Hardware not included.
VT No. 31-0894
Model Hardware
Evolution (2) None
TC-88 (2) 1/4 2 20 x 2 1/2
31-0894 (2) 37-0404 3/4
Oxygen Sensor Sealing Washer
VT No. Year Size
15-0081 2006-10 18 mm
15-0012 2011-up 12 mm
30-0544 Installed SLIP-ONS
30-0544 Double D Slip-on Mufflers bolt to stock head pipes

and feature doublewall performance, 1¹⁄₂” baffles
and have the same diameter as stock. Sold in head
pipe for smooth look. Fits 1986-99 FLST.
VT No. 30-2024
Chrome LAF Exhaust Header Set with a down style and

features a 2¹⁄₄” diameter. Sold in a quantity of 2. Set is for left
side and right side drive applications.
VT No. 30-0544
see note for important information regarding emission control regulatory compliance and warranty information.
308
Upsweep Exhaust
BIG TWIN
2:1 Siamese Exhaust
Header Set with a 1³⁄₄”
outer diameter, fits under
the carburetor on rigid or
swingarm frames. Muffler
not included. Fits 1986-99
FX.
Chrome Black
30-0582 30-0583
30-0390 Rinehart Exhaust Systems feature a

three step header pipe that starts at 13/4”at 29-0086 with Megaphone
the head, increases to 1⁷⁄₈” and finishes at
2”. The system has permanently mounted
2¹⁄₂” full length heat shields, removable
performance baffle and polished black anodized billet aluminum
end caps. Fits 1986-06 FXST.
VT No. Style
30-0390 Flush Cut
30-0391 Staggered
29-0089 Installed
29-1131
29-0500
Installed
FXST Fish Tails are chromed with upsweep in 1³⁄₄” diameter Chrome 13/4” Up Sweep Header
for Evo and TC-88 models. Baffles not included Sets for 1984-86 FXST models.
VT No. Year Use with straight fishtail exten-
Bracket
29-1131 1986-99 sions or mufflers which must be
Set
29-0500 2000-06 purchased and mounted sepa-
FXST Muffler Clamp Set rately. 1984-99 applications will
VT No. 30-1435 also require separate purchase
of correct mounting brackets.
Header Set Fits Mounting Bracket
VT No. VT No.
29-0086 1984-94 31-4088 Rear Pipe Mount
31-4089 Hanger Strap
Samson Hell Raiser Series 29-0089 1995-99 31-4090 Mounting Bracket Kit
30-0057 Sinners Piranha Exhaust Pipe 30-0589 2000-06 Included
Sets for 1984-06 Softail model.
Feature 220° heat shields, 1³⁄₄”
head pipes, 2¹⁄₄” diameter body and
includes mount hardware when
required. VT No. 30-0057
309
Exhaust
2” Side Sweeper Exhaust Pipes fit 5 and
6-Speed 1986-17 FXST models without foot-
boards. Pipes have oxygen sensor ports with
plugs which can be removed for 2007-17
models to install sensors.
VT No. 30-0792
Wyatt Gatling Exhaust Sets feature “Quad Finishing”

which includes triple dura nickel and chrome as the final
finish. After chrome plating, pipes are normalized and dried
30-0792
@572° F for the final finish process.
Monster Drag Pipe

Wyatt Gatling Monster Drag Pipes feature 2¹⁄₄” outside diam-
eter and mount to stock brackets. Fits 1986-06 Softail models.
Order baffles separately. Black end cap fits straight cut end
pipes, by drilling ¹⁄₄” mount hole. Order 30-0452 end caps sep-
arately.
VT No. Fits
30-0551* Straight Cut
2¹⁄₄” 30-0551 Installed
30-0552 Down Slash, Shorty
30-0578 Down Slash, Longs
30-0556 Side Cut
30-0579 Side Slash, Shorty 31-0016
31-0016 Bracket
*Note: Does not include mounting hardware.
30-0551
30-0552 Installed
30-0552
30-0556 Installed
Black Billet Tapered Tips for 2¹⁄₄” pipes.

VT No. 30-0799
30-0799
30-1599
Vance & Hines Black Short Shots feature 1³⁄₄” header pipes
with full coverage 220° heat shields that run all the way back
to the end caps. Includes removable baffles and mounting
hardware. Available in black. Fits 2012-17 Softail Slash cut.
Note: Will not fit models with kickstart.
VT No. 30-1599
310
1984-94 FXR, 1991-17 FXDWG Exhaust
BIG TWIN
Chrome 2 into 1 Exhaust Pipe Head. Single 30-0768
type fits 1984-94 FXR-FXRS.
VT No. 29-1145
T-Bolt Set is a replacement for all of our

muffler pipes which have channel type
mounting. Supplied with nut.
VT No. U/M
31-2116 Pair (2")
31-0223 10 pack (2")
31-1971 31-1971 Pair
30-0769
Chrome Down Slash Slip-On Muffler Set has removable baf-

fles. One bolt for a quick removal. Sold in a quantity of 2. Fits
1995-2005 FXD & 1995-2005 FXDWG. OEM# 80366-99. 30-0772
VT No. 30-2040
31-0189 FXR Exhaust Pipe Brackets zinc plated.
31-0189 65670-82 Front 1984-94
31-0188 65671-82 Rear 1984-94
31-0188 31-1016 Rear 1986-94
FXR Drag Pipe Set

1³⁄₄”
VT No. Year 2:1 Lake Side Pipe Exhaust Kit with a turn out end.
30-0885 1982-85 Available in chrome or black finish and includes heat shields.
30-0886 1986-94 Features a 3" collector with tun out end. Collector has no baf-
fle. Includes flange rings and mounting bracket for use with
30-0885 forward control only on 1986-94 FXR, 1991-17 FXDWG and
1984-2017 FXST.
Chrome Black Fits
30-0768 30-0769 1984-11 FXST, 1986-94 FXR,
FXD-FXR 1991-11 FXDWG
30-0772 30-0773 2012-17 FXST, 2012-17 FXDWG
50-1064 50-1106 *Note: 30-0768 and 30-0769 have 18 mm O² sensor bungs
and O² sensor plugs are include for pre 2006 applications.
30-0772 and 30-0773 have 12 mm O² sensor plugs.
Clamp Set for 1982-94 FXR, 1991-
96 FXD pipe.
50-1115 VT No. 31-0556
50-1123 Exhaust Bracket Mounting Block fits all

Fender Strut Sets with signal and mount holes. 1982-86 FXR models and replaces 65780-
Chrome Polished Fits Type 82, Sold each. VT No. 28-0229
50-1064 50-0286 1982-86 FXR,
1983-91 FXRT-FXRP Strut
50-1106 50-0285 1987-94 FXR except
FXRT-FXRP Strut
50-1115 1997-06 FXDWG Cover
50-1123 2007-17 FXD Cover
311
Drag Pipe
30-3032
30-2166
30-3015 Installed on 1984-99 FXST
30-3003
30-3015
30-3393
30-3102
30-3399
30-3015
Wyatt Gatling Drag Pipe Sets are 1³⁄₄” slash cut style 38”
length. Pipes mount by stock brackets. 30-3015
VT No. Year Model
30-3032 1984-99 FXST Muffler Pipes, 1 Piece Muffler and
30-3050 As Above 3 Sets Exhaust Header are welded together.
30-3051 As Above 6 Sets
30-3003 1984-99 FXST includes heatshields
30-3015 1984-06 FXST
30-3102 1984-99 FXST with Black Tips
30-2166 1984-99 FXST Goose
30-3394 2007-17 FXST Goose 30-0549
30-3393 2007-17 FXST Drag
30-3399 2007-17 FXST with Black Tips
Chrome Exhaust Pipes Turnout
Set for all 2000-06 FLST-FXST.
Features include 13/4” head pipes,
2¹⁄₂” diameter mufflers with true
one piece construction. Uses Muffler Pipe Set fits 1986-99 FXST-FLST.
stock flange rings, gaskets, hard- VT No. Type
30-0549 Tapered 31-3980
ware and mounts to the factory
bracket. 31-3980 Bracket
VT No. 29-1196
1³⁄₄” Drag Pipes

1³⁄₄” Drag Pipes by Cycle Shack are 40” long.
Pipes Bracket Type
FLSTF
30-3368* Stock 1990-06, 1990-99 use OE bracket
FXCW
30-3379 Stock 2008-17
*Note: Order mounting bracket for 1990-99 replacement appli-
cations. Drag Pipes Competition or Drag Pipes are not approved for highway use in any state.
They are meant for show or race competition. Stock: Indicates no additional brackets
required. Brackets must be ordered separately when required.
312
Exhaust for FLSTS Slip On Muffler
BIG TWIN
30-0049 30-0049
Installed
30-0846
31-0815
Wyatt Gatling Chrome Long Cannon Slip On Muffler Set

29” Fishtails for FLSTS Heritage models available in straight
Fits 2018-up FLFB, FLFBS, FLSL, FXBB, FXBRS, FXLR.
or muffler fishtail. Fits 1997-2017.
VT No. 30-1289
VT No. Type Fits
30-0049 Straight FLSTS 1997-2006 without baffle
30-0846 Straight FXSTS 1997-2017
31-0815 Bracket (each)
See them on the web! www.vtwinmfg.com
FXD Muffler Pipe Sets
30-1559 30-1595
Vance & Hines Big Radius Exhaust features 2¹⁄₂” full

29-1151 header and muffler heat shield system, slash cut end caps,
removable baffles and mounting hardware. Include mounts
for factory O2 sensors where required. Available in chrome or
black finish.
Chrome Black Fits
30-1594 2006-11 Dynaglide Models
30-1559 30-1595 2012-17 Dynaglide Models
30-1597 2012-17 FXST, FLST Models
*Note: Pre 2007 models require purchase of O2 sensor plugs
VT No. 30-0423.
29-1153
Chrome Exhaust Pipe Set features 1³⁄₄" outer diameter head-
er pipes, and has one piece construction. Fits 1991-94 FXD.
VT No. Style
29-1151 Super Slash
29-1153 Tapered 30-1602
Black Vance & Hines Big Shot Set features 2¹⁄₂” header
pipes. The unique crossover power chamber design increas-
es horsepower and torque, and includes full coverage heat
shields, billet end caps, removable baffles and mounting hard-
ware. Available in chrome or black finish. Fits 2012-17 FXD.
Big Shots are staggered style with slash cut ends.
VT No. 30-1602
Side Slash Slip-On Muffler Set has an outer diameter of 3¹⁄₄ Oxygen Sensor Sealing Washer.
with an inner diameter of 3". Fits 1995-05 FXD, FXDWG mod- VT No. Year MM
els. VT No. 30-0861 15-0081 2006-10 18
15-0012 2011-up 12
313
Exhaust for Slip On Muffler
2000-17 FXST-FLST
30-1282
30-0798
Chrome 29" Muffler Set has a 1³⁄₄” inner diameter and a 4”

outer diameter. Fits 1997-2017 FLST.
VT No. 30-0798
30-1281
30-1283
Chrome Slip On Muffler Slash Style Set fits 2007-17 FXST.

VT No. 30-0997
30-1284
Slip On Muffler Set with side slash style ends mounts with
5/16 T bolts which are supplied. Order clamp set separately.
Slip On Chrome Muffler Set for stock OE headers. Fit 2007- Sold as set. Fits 2000-09 FXST.
17 FXST. VT No. 30-0985
VT No. Type
30-1282 Black Tip The Best Muffler Clamp!
30-1281 Chrome Tip VT No. 31-1007
30-1283 Chrome Ball Milled
Pipes for FLSTF

30-1284 Chrome Tapered Cone
Pipes for FLSTF-FXSTD in

40” Goose Style Drag Set 1³⁄₄” header pipe.
30-2166 features retro chopper styling 2000-06 1990-99
in 1³⁄₄” diameter and slash cut 30-3368 30-3368 30-3368
ends. Use with existing brack-
ets. Fits 1996-99 FXST. Note: Modification to original equipment
exhaust systems may not be permitted
VT No. 30-2166 under local or Federal noise limitation
and/or emission laws. Check your local
Chrome Deluxe Drag Pipe Set fits regulation before ordering. The high per-
30-0078 2005-06 FLSTF models. Features
formance exhaust components offered in
our catalog are legal for off road use only
on 1979 and later models.
1³⁄₄” header pipes, 2¹⁄₂” diameter
mufflers and one piece construction. Cycle Shack Patch.
Uses stock flange rings, gaskets VT No. 48-1432
heat shields and mounts to stock
bracket. VT No. 30-0078
314
2¹⁄₄” Exhaust for FXD-FXDWG
BIG TWIN
2¹⁄₄” Drag Pipes fit FXD-FXDWG.
Brackets are included. Order baf-
fle rings separately.
VT No. Fits
30-0371 1995-05 FXD
30-0475 2006-17 FXD
31-0811 1995-17, Repl. Bracket
30-0050 Baffle Rings
30-0050
Oxygen Sensor Tool will

remove and install oxygen
sensors on fuel injected 30-0371,
models. Can be used with 30-0475
7/8” wrench or 3/8” drive.
VT No. Fits
16-1131 18mm
16-1132 14mm 30-0371 30-0475
Sweeper Exhaust fits FXD

30-0786 Installed on 2006 FXD models including 2006-17 mod-
els with oxygen sensors. Pipes
are 1³⁄₄” to 2¹⁄₄” at end portion.
Bracket included. Order baffle
separately.
VT No. Item
30-0786 1991-17 Pipe Set
30-0423 Oxygen Sensor Plug
30-0423
Wyatt Gatling Exhaust Sets feature “Quad Finishing” which includes triple dura nickel and chrome as the final finish. After
chrome plating, pipes are normalized and dried @572° F for the final finish process.
Vance & Hines Super Radius 2 into 2 Pipe Set. Super radi-
30-1650 30-1651 us brings a deeper richer tone to the custom styled exhaust
and is engineered for today’s larger capacity engine to get
solid performance and just the right sound. Features include
deeper tone, full coverage heat shields and available in
chrome or matte black.
Chrome Black Fits
30-1650 30-1651 2000-17 FXD
315
Exhaust for FXD
VT No. 29-0211
Installed
FXD Shotgun Style Exhuast Drag Pipe Set. Fits 1991-17.

VT No. Finish
29-0210 Chrome
29-0211 29-0211 Black
2:2 Crossback Exhaust

Rinehart Racing Chrome Crossback 2 into 2 Exhaust
Namz O2 Enrichment Device
Recommended for bikes with high flow air
System. The Crossover three step header design with 2¹⁄₂”
cleaners and performance exhaust systems.
chrome integrated mufflers significantly boosts torque and
The reduces engine operating temperature
horsepower across the RPM range. Crossback systems are
between 20-30 degrees. Just simply plug
available in flush cut or staggered versions, and include 2¹⁄₂”
this in between oxygen sensors and wiring
220° full coverage heat shields that merge flush to the muffler
harness. Fits 2007-2008 FLT, 2007-2011
bodies with custom billet end caps and two sets of baffles.
FXST-FLST.
The system has a 2” outer diameter for engines up to 96
VT No. 32-6553
cubic inch and 21/4” outer diameter for large high performance
engines. All systems include two oxygen sensor ports.
Flash Cut Style
VT No. Fits 30-1549
30-1547 2006-17 FXD
Staggered Style
30-1549 1986-17 FXST
30-1550 2006-17 FXD
316
Exhaust Taper Valve
30-0329
BIG TWIN
30-0113 30-0355
Stainless Exhaust Taper Valves fit into exhaust between pipe and head to put back the low end torque which is lost when large
diameter or straight pipes are used. Fit Evolution models with factory or aftermarket pipes and are sold in pairs.
VT No. Type Material Stainless Steel Taper Valve Kit includes 2 pure stain-
30-0113 Machined Stainless less extruded sleeves to fit between pipe and exhaust
30-0355 Extruded Stainless port, to aid in back pressure when range outside diam-
30-0329 Extruded Steel eter or drag pipes are used. Kit includes solid copper
machined exhaust seals which will not restrict gas flow.
VT No. 30-0119
Heat Shield
30-0134 Front Chrome Heat Shield for 1986-95
30-0097 FXST-FXR.
VT No. 30-0134
Chrome Crossover Heat

30-0096
Shield includes two worm
Chrome Smooth Heat Shield Sets fit 1986-99 FXST, 13/4” clamps. Fits 1980-84
Drag style or one piece muffler pipes, no cut out for cross tube, FXWG.
clamps included. VT No. 30-0096
VT No. Type
30-0097 Front and Rear
30-0337 Front
Exhaust Wrap
48-0125 48-0126 48-0127
48-0157
48-0131 48-0132
High Temperature Exhaust Wrap reduce radiated exhaust
heat. Wrap that will withstand up to 2000 degrees. Tie wraps
sold available separately.
VT No. Size Item
48-0125 14” Stainless Tie Wraps, 4 pack
48-0137 48-0139 48-0157 Stainless Wraps, 10 pack
Fiberglass Wrap. 48-0126 25’ x 2” Black Wrap
VT No. Size/Color 48-0127 25’ x 2” Tan Wrap
48-0137 2" W, 25' L, Light Khaki 48-0131 25’ x 1.5mm White Wrap
48-0139 2" W, 25' L, Taupe 48-0132 25’ x 1.5mm Black Wrap
48-0251 25’ x 1.5mm Silver Wrap
48-0137 25’ x 2 Brown Wrap
48-0139 25’ x 2 Copper Wrap
Item-2974-1 Transmission Drain Plug
317
Universal Heat Shield 30-0118 Installed
30-0362 Groove 30-0365 Flame
Universal Heat Shields include clamps for installation.

Chrome Universal Heat Shields with groove or flame.
VT No. # Type Dia. Length
VT No. Style 30-0256 30-0109 A Perforated 1³⁄₄” 9”
30-0321 4” Groove
30-0106 B Smooth 1³⁄₄” 7”
30-0362 6” Groove
30-0365 6” Flame
30-0256 Worm Clamp Set 30-0482 30-0483
30-0120
30-0121
30-0478 30-0480
30-0124
Flame
30-0122
Chrome Universal Heat Shields are available for 1³⁄₄”or Chrome Black Dia. Length
30-0118 1³⁄₄” 8” 30-0256
2¹⁄₄”straight pipes and includes mounting clamps. Sold individ-
ually. 30-0117 1³⁄₄” 11”
For 2¹⁄₄” Pipes 30-0481 30-0483 1³⁄₄” 9”
For 13/4” Pipes
30-0120 4” 30-0482 30-0484 1³⁄₄” 12”
30-0122 10”
30-0474 6” 30-0473 30-0479 2¹⁄₄” 9”
30-0123 12”
30-0121 10” 30-0478 30-0480 2¹⁄₄” 12”
30-0124 18”
30-0256 Worm Clamp Set
Skull
Chrome Black Dia. Length
30-0887 30-0888 2¹⁄₄” 9”
30-0889 30-0890 1³⁄₄” 9”
30-0221 30-0245 30-0834
Chrome Replica ‘Spoon’ Style Heat Shield.
VT No. Length 30-1766
30-1763 30-1765
30-0221 5¹⁄₂”
30-0245 9” Chrome Heat Shield.
30-0834 Replica VT No. Length
30-1763 4”
30-1764 6”
30-1765 12”
30-1766 18”
Exhaust Clamp
Chrome Muffler End Clamps. 1⁵⁄₈” for use
Exhaust Mount Clamps (2” and under).
when attaching muffler to 1¹⁄₂” tubing.
VT No. I.D. Size Style Length
31-3947 1” “P” shape Long
Hanger Clamp VT No. I.D. Size
31-0270
31-0270 1⁵⁄₈”
31-2100 1¹⁄₂” Hanger Long
31-2132 1³⁄₄”
31-2101 1³⁄₄” Hanger Long
31-2103 1⁷⁄₈”
31-2146 1³⁄₄” “P” shape Short
31-2144 1⁷⁄₈” Heavy
31-1011 1³⁄₄” “P” shape Long
31-1007 1⁷⁄₈” Super
31-0816 1⁷⁄₈” “P” shape Short 31-2103
31-2105 1⁷⁄₈” Hanger Long 30-1435 1⁷⁄₈” with seal
31-2102 2” “P” shape Short 31-9914 2”
Muffler Mount Clamps 31-9948 2¹⁄₈” Wide
VT No. I.D. Size Style Length P Clamp 31-0283 2¹⁄₄” Narrow
31-2120 2¹⁄₂” Hanger Long 31-2099 2⁷⁄₈”
31-2141 3” 31-2144
31-2106 2¹⁄₂” “P” shape Short
31-2108 3” Hanger Short 31-1977 3¹⁄₂”
31-1977 3¹⁄₂” Hanger Short 31-2109 3¹⁄₄”
31-2107 2³⁄₄” Hanger Short 31-4016* 3¹⁄₄”
37-8683 Bolt Set 31-1007
31-2120
318 *Note: Stainless steel sold each
30-0205
Exhaust Gasket
for Evo & TC-88
BIG TWIN
15-0451
15-0732 Exhaust Port Gasket of knitted stainless
steel fits all Evo and Twin Cam models.
VT No. Type Qty
30-0257 15-0227 Tapered 2
15-0267 Mesh Gasket 5
Exhaust Flange Kit fit 1984 Evo and Twin Cam replacing
15-0712 Tapered, James 5
65328-83. Kit includes snap rings and mesh gaskets.
15-0732 Tapered 10
VT No. Item U/M
15-1236 James 2
30-0205 Kit Each FXST Muffler Clamp and Gasket Kit
12-0942 Snap Ring 10 includes two chrome clamps and two sleeve
15-0227 Gasket 2 gaskets. Kit is required for correct installation
15-0451 Gasket & Snap Ring Kit of stock or accessory type mufflers on all
15-0732 Gasket 10 2017-up FXST and FLST models. Fits 2017-
12-1187 Exhaust Stud 5 30-1435 up FXST and FLST. VT No. 30-1435
30-0257 Chrome Flange Only 2 30-0563
30-0563 Flange Set, Polished 2 Crossover Tube Gasket fits
15-1291
Exhaust Port Flange Kit includes 2 FXR and FXD models. Each.
flanges, 2 gaskets, 2 snap rings, 4 nuts, GB No. James Type
and 4 studs. For use on all Evo and Twin 15-1531 15-1069 1982-94 FXR
Cam models. VT No. 30-0420 15-1530 15-1076 1991-17 FXD
30-0420 15-1291 2003-17 FXD
Chrome Exhaust Finned
M-8 Muffler Header
Flange Set fits all Evo and Twin
Gasket Set fits 2018-
Cam models. VT No. 30-0857
up. Replaces OEM#
15-1274 Exhaust Port 65900017.
15-1285 Gasket Kit VT No. 15-0776
includes two
stainless steel
Solid Copper Exhaust Gaskets fit
knitted gaskets,
Evo models.
VT No Brand two snap rings
VT No. 15-0777
15-1285 Wyatt Gatling and four heavy
duty flange nuts. Exhaust Stud Kit includes 4 studs and 4
15-1274 James flanged nuts. Fits 1984-96 Big Twin.
Fits all 1985-17
Twins. VT No. Item
Exhaust Kit includes four 12-2125 12-2125 Kit
chrome cap nuts, four wash- 12-2527 Kit
ers & two mesh gaskets. 12-1187 Studs Only
For 1984-99 1340 Evo. Exhaust Port Lock Kit.
VT No. Type Special fasteners and
37-8900 15-0726 37-8900 V-Twin lock tabs secure pipes
15-0726 James for good. Fits 1984-99
Exhaust Gasket Installer Tool will correctly install Evo.
exhaust port gaskets into cylinder heads, minimizes VT No. 37-0251
gasket distortion and helps heads flow better. For use
on all Evo and Twin Cam models. Drilled Style Exhaust Flange Clamp Set
VT No. 16-1675 V-Twin fits all Evo and Twin Cam models.
VT No. 16-2112 Jims VT No. 30-0724
Exhaust Bracket
FXST-FLST Exhaust Support mounts stock or custom drag
31-3980 pipes to frame. Stock on FXST models, but used on Fat Boy to
mount lower drag pipes. The VT No. 31-4030 can be used on
1995-up models to mount early style Porkster or Cycle Shack
drag pipes.
31-4046 VT No. Type Fits
31-3980 Chrome 1984-94 FX-FLST
31-4046 Chrome 1995-99 FX-FLST
31-0815 31-4047 Chrome 1995-up FXSTF-N 31-4047
31-0815 Chrome 1997-17 FLSTS
31-4030 Black 1984-84 FXST
31-4030
319
Baffle Note: Baffle size denotes size of pipe into which it fits.
A 30-0102 B 30-0217
30-0372 A
30-0618
Torque Tube Set will fit into 21/4” inner diameter of straight
pipes, unique shape will compress exhaust gases for more
sound and less noise with added power. One ¹⁄₄” hole is
B 30-0216
required for mounting. The 4.5” long baffle. 30-0103
VT No. Type Pipe Baffles fit inside straight pipes. Sold in pairs. Note: Baffle
30-0618 Plain size denotes size of pipe into which it fits.
30-0372 V-Slots VT No. # Size Length
Blunder Buss Pipe Baffle
30-0102 A 1³⁄₄” 4”
is full 12” long steel. Sold
30-0103 A 2” 4”
in pairs. Note: Baffle size
30-0216 B 1³⁄₄” 8”
denotes size of pipe into
30-0217 B 2” 8”
which it fits.
1³⁄₄” Baffle Set
VT No. Size Type includes baffles
30-3180 1³⁄₄” Steel which are 12”
30-3181 2” Steel long.
30-1405 1³⁄₄” Fiberglass VT No. 30-1403
30-1406 2¹⁄₄” Fiberglass
30-0617
Torque Tube Set allows
Performance Rings fit into 2¹⁄₄”
variation of air flow for
drag pipes to create back pres-
21/4” pipes. Four Piece Set.
sure.
VT No. 30-0617
VT No. 30-0050
30-0623 30-0619 Features

• Easy Installation
• Forward Mount Ring
• Burn Out Proof
• No Rattles
30-0624 30-0620
30-0990
Power Spiral Baffle Set features
the latest designs in exhaust baffle
concepts. The minimum restrictive
Replacement Torque Tube Baffle Set are available as properties of the inverted cone allow
replacements for Screamin' Eagle or Wyatt slip on muffler. for more power and yet reduce decibel
Installed on FXST, FXD or XL models. number to acceptable levels. Forward
For For mount ring at tip allow mounting of
Screamin' Eagle Mufflers Wyatt Mufflers Type various size discs to produce required
30-0623 30-0619 Smooth back pressure on specific applications.
30-0624 30-0620 V-Slots Flexible design allows installation into
30-0980 Snuff or Not for 2¹⁄₄” turn out ends.
30-0454
tube style baffles for Size VT No. Baffle Size
added back pressure. 2” 30-0991 12”
Mount with ¹⁄₄” - 20 2¹⁄₄” 30-0988 8”
UNC screw. Pipe Baffler fits inside straight pipe.
VT No. Type Bafflers are like the original Snuff-or-Not,
30-0454 Ring which is a washer that can be turned to
30-0980 Screw baffle position. Fits 2¹⁄₄” drag pipes.
VT No. 30-0317
320
Baffle Set
BIG TWIN
30-1407
Pipe Baffles are measured for
O.D. to fit I.D. of Pipe.
30-1411
Length
8” 8.25” 8.5” 9¹⁄₂” 10" 10¹⁄₂” O.D.
30-1604 1³⁄₄”
30-1419 1³⁄₈”
Baffle 30-1405 1⁵⁄₈”
30-1416 30-1410 30-1407 30-1411 1⁷⁄₈”
30-1434 2”
30-1417 30-1414 30-1406 2¹⁄₈”
30-1418 30-0351 2¹⁄₄”
30-1415 2⁷⁄₈”
30-0351
30-1307
EVEN FLOW WITH LESS RESTRICTION!
9.5” Long Steel Pipe Baffles will fit into straight pipes with an
outer diameter of 1³⁄₄”. Sold in a quantity of 2.
VT No. 30-1307
Our First Inspection Tag Holder

produced by Newburgh Steel Products in 1968,
Thanks Frank!
Inspection Tag Plate is available in stainless
or chrome. Measuring 3¹⁄₂” square with ¹⁄₂” or ³⁄₈”
mounting hole which can mount to footpeg or shock
studs.31-0282 is square type which clamps on to 1”
to 1¹⁄₈” tube with worm clamp included.
VT No. Item Type
31-0201 Stainless .5”
31-0264 Chrome .5”
31-0983 31-0983 Chrome ³⁄₈”
31-0933 31-0282 Chrome Clamp
31-0201 31-0264 31-0933 Black .5
31-0282
Remote Inspection Tag Holder First Offered by
V-Twin Mfg. in 1969
321
Billet Engine Mount
31-0664 31-0667
31-0709
31-0709 Installed
Chrome Billet Top

Engine Mount fits 1948-
31-0665 31-0689 31-1275 99 Big Twin motors.
Chrome Billet Top Engine Mount fits 1984-99 ST models. VT No. Type
Order related brackets separately. Coil mounts accept 2-single 31-0709 Smooth
fire Crane or Dyna coils. 31-1275 With holes
VT No. Item Year Type
31-0664 Top Mount 1984-99 Evolution
31-0667 Top Mount 2000-05 Carb Only TC-88
31-0665 Coil Mount Without key switch hole
31-0689 Coil Mount With key switch hole
Chrome Billet Key Switch Mount bolts to
32-0161
top motor mounts with 2 holes.
VT No. 31-0726
31-0728
Billet Alloy Coil Mount will attach to three
bolt on 1992-up Big Twin stock motor mount
to mount coil. 32-0869
VT No. 31-0699
32-0867
31-0812
31-0747 without coil 31-0747

Chrome Billet Top Engine Mount Kit includes key switch/
push-button housing fits 1984-99. Order push button switches
separately and tap existing holes to 8mm x 1 for button installa-
tion.
VT No. Item
31-0747
32-0867 Button Switch (2 Wire)
32-0869 Button Switch (1 Wire)
32-0161 Key Switch
31-0812 Switch Bracket
31-0747
Chrome Top Motor Mount with Integral Coil Mount provides
a coil mounting that is up and behind the normal top motor
mount. Mounts coil between cylinders for use with coils with
central terminals such as VT No. 32-0090 spacing required for
31-0468 31-1024
proper installation. Mounts a style of coil as shown. For Twin
Cam and most Evolution coil applications, spacing maybe be Top Motor Mount
required. Use cover 42-0962. VT No. Item
VT No. For Motors 31-0468 80" - 100" motor
31-0747 80-100” 31-1024 1991-98 FXD
31-0746 101” and up
322
Steel Top Engine Mount
31-0901 31-0903
BIG TWIN
31-0628
31-0219
31-0459
1984-99 FXST-FLST Chrome Mounts. Chrome Top Mount Kit includes choke mount.
VT No. Item VT No. Year Model
31-0219 Mount Kit 31-1037 1986-99 Softail 31-0546 31-0678
31-0628 Cross Strap 31-0678 2000-05 Softail
31-1052 Mount Set 31-1052 31-0901 2006-17 Softail
31-0459 Mount Block 31-0903 2006-17 Softail
2853-6 Mount Kit 31-0902 2008-17 FXWG
31-0657 Chrome Engine Mount
31-1265 Set fits 1984-99 Big Chrome Top Engine Mount Kit includes cross and top brack-
Twin Evolution features et and hardware for Softail and FLT carburetor models. Fits
2000-05.
tab to mount coil. VT No. Item
VT No. Type 31-0546 Kit
31-0657 2 pc 31-0678 Bracket Set Only
31-1265* 2 pc Chrome Engine Mount to Cylinder Head Bolt
*Note: With choke switch bracket. Set features countersunk allen bolts and wash-
Chrome Three Piece Top Mount Kit for ers for 1993-17 Big Twin.
1992-99 FXST-FLST, 2000-05 Softail and VT No. 9967-4
FLT includes choke mount. Chrome Choke Cable mount replaces 69126-
VT No. 31-0560 92. Fits 1993-17 FLT-FXST/D.
VT No. 31-0557
31-0212
31-0901 31-0903 31-0902
31-0453
Chrome Heavy Duty Two Piece Top Engine Mounts are con-
structed of 1/4” thick steel. FXST-FXR models include horn and Chrome Top Mount Kit includes choke mount.
choke mount. Mounts have provision to direct mount two bolt igni- VT No. Year Model
tion coils. Note: Fits Shovelhead or Panhead motor in Evolution 31-0678 2000-05 Softail
Style Frame 31-0901 2006-17 Softail
VT No. Year Model 31-0903 2006-17 Softail
31-0212 1984-99 FXST-FLST 31-0902 2008-17 FXWG
31-0453 1984-94 FXR 31-0119 31-0118 Chrome Big Twin Top
31-0168 Chrome Rectifier-Regulator Bracket Mount fits
Motor Mounts replace the
stock type.
1976-86 FX-FL. Replaces 74533-75B.
VT No. Year Type
VT No. 31-0168
Chrome Top Engine Mount 31-0119 1984-89 FXR
replaces 16216-83A. Fits 1984- 31-0118 1984-90 FXST
89 FXR. 12-1188 1984-99 Studs
VT No. Type
31-0119 31-0119 Stock
31-0453
31-0453 W/horn & choke mount
Mounts for FXD-FXWG
Chrome Top Mount Kit includes choke
31-0902
mount.
VT No. Year Model
31-0902 2008-17 FXWG
31-0574 31-0607 31-0679 31-1050 Top Engine Mount Stabilizer Kit

Chrome Black Fits
31-0294 31-0362 31-0363 1992-2004 FXD
31-0364 31-0365 2005-2017 FXD
Front Mount fits 1990-up FXD FXWG.
VT No. OEM Item Fits Type Year Motor Mount Kits for FXD.
31-0574 47583-90B Mount Front Black 1991-11 VT No. Years Type
31-0607 47564-90B Mount Rear Chrome 1991-98 1999-up Front Only
31-0679 47564-99 Mount Rear Black 1999-up 9937-20 1999-up Chrome Allen
31-0294 16258-95B Stabilizer Steel 1995-up 9936-28 1999-up Acorn
31-1050 Mount Top Chrome 1995-up Trans to Motor Mount TC-88, FXD
9934-8 1999-up Acorn
9935-8-P 1999-up Polished Allen
323
Engine Mount Bolt A B
37-0952
Upper and Lower Chrome Front Engine Mount Bolt Mount Block. Front
VT No. Years Model Type motor mount bolts thread into this regulator mount block.
9854-28 1984-99 FXST Chrome
VT No. Type
9855-28 1984-99 FXST Zinc
9927-28 1984-99 FXST Allen 31-0635 A
9927-28-P 1984-99 FXST Polished Allen 31-0739 B
Lower Only 37-0419 37-0419T
9859-20 1989-99 FXR Chrome
37-0952 As Above V-Twin
9928-20 1989-99 FXR Allen
9928-20-P 1989-99 FXR Polished Allen
Lower Front Chrome Top Motor Mount Spacer Set for spacing out top
2116-15 2000-up Softail Chrome Allen
mount or wide tire conversions. Spacers have 7/16” inner with
2117-15 2000-up Softail Chrome Hex
11/8” outer diameter.
2118-15 2000-up Softail Zinc Hex
VT No. Thickness
Chrome Allen Screw Kit connects motor
37-0419 ³⁄₄”
mounts, front, top and rear to frame on mod-
37-0419T* ³⁄₄” *Note: Zinc
els listed below. Knurled.
VT No. Fits
37-9180 1991-17 FXD
37-9187 1984-99 Softail, 1985 FXWG-FXE
9937-20-P 1991-up FXD Front Mount
Top Mount for FXR for 1982-06

31-0682 31-1975
31-0258
31-0121 31-0155
31-0240 31-4065
31-4065
31-0900 31-0905
Engine Mount Components Urethane Engine Mount replaces the stock mount in all Big
VT No. OEM Item Finish Fits Twin with rubber mounted engines. It uses urethane formulated
31-0121 16207-79B Front Mount Black 1984-94 FXR compounds with enhanced compression and rebound dampen-
31-0155 16207-79B As Above Chrome ing propertied for a 20% reduction in transmitted vibration.
31-0258 96210-80 Washers for Above Zinc VT No. Finish Brand Fits
31-0240 16219-79B Stabilizer Link Chrome 1984-94 FXR 31-1975 Black Velva-Ride 1984-94 FXD
31-4065 47159-79A Front Bracket Chrome As Above 31-0900 Black Sifton 1984-94 FXR
31-0682 Chrome Sifton 1982-94 FXR
31-0905 Chrome Sifton 1982-94 FXR
324
Coil Cover
BIG TWIN
42-0415 42-0417 42-5523
42-1030 Chrome Teardrop
Coil Cover fits top
motor mounts with
2 holes such as
31-0664. Includes
key switch hole.
42-1529 42-0215 VT No. 42-0926
42-9949 installed
42-9949
42-0445 42-1015 Chrome Teardrop Coil Covers for FXST with late molded
coils. Fits 1984-99 FXST-FLST.
42-1077 VT No. 42-9949
42-0486 42-0487 Chrome Coil Covers fit single
fire coils, in stock location.
VT No. Year Model
42-0486 1984-98 FXD
42-0487 1984-99 Evolution
Softail
42-0416 42-0446
Coil Covers.
VT No. Style Year
42-0415 Smooth 1965-84 FL, 1986-99 FLST, 1984-99 FXST
42-0417 Louvered 1965-84 FL, 1986-99 FLST, 1984-99 FXST Stainless Coil Side
42-5523 Skull 1965-84 FL, 1986-99 FLST, 1984-99 FXST Panels attach to 1985-
42-1030 Flame 1965-84 FL, 1986-99 FLST, 1984-99 FXST 99 coils.
42-1529 Flame 1965-84 FL, 1986-99 FLST, 1984-99 FXST VT No. 42-0039
42-0215 Finned 1965-84 FL, 1986-99 FLST, 1984-99 FXST
42-0445 Smooth 2000-06 FXST, FLST with carburetor
42-1015 Smooth 2007-17 FXST, FLST
42-1541 Flame 2007-17 FXST, FLST
42-0416 Smooth 1983-94 FXR
42-0446 Smooth 1999-05 FXD with carburetor
42-1077 Smooth 2008-11 FXCW, 2011-13 FXS
Full Chrome Coil Cover fits 1983-

99 XL-FL.
VT No. 42-0839 Chrome Finned Coil Cover fits coil mounted on top engine
mount.
VT No. 42-0962
Coil Bracket fits touring model, 2002-up.
VT No. 31-0841
Coil Cover and Speed Nut for Big

Twins.
VT No. Years
37-1956 1985-99, Screw only
12-0555 Nut only, 8115B
37-1956
325
Dual Fire Ignition Coil
Chrome Stock 32-0511 Volt Tech Molded Blue Streak
Coil bolts origi- Coil features black 45,000 Volt
nal brackets. Fits late shape with Coil provides
1984-89. Replaces bobbin type wind- more spark
31614-83. ings. Fits 1983-99. and energy
VT No. 32-0512 Replaces 31614-83. 32-0171 32-0769 than stock coil
VT No. 32-0511 and the higher voltage eliminates spark
deterioration at peak RPM.
Volt Tech Dual
Andrews Coils for VT No. Years Type Ohms
Fire 80 KV Coil
electronic ignition 32-0171 1980-99 Electronic 2.7
mounts to stock
systems. The coil 32-0769 2000-06 Electronic 2.7
locations.
produce more volt- Single Fire: Just the spark plug for the piston that is in its compression stroke will be fired.
VT No. 32-0095 The other piston, being in its overlap position will not be ignited.
age than stock coils. Dual Fire: Both spark plugs are fired simultaneously at the time only one piston is in its
compression stroke.
1985-99, 2.8 ohms. This is the way the stock motor works on pre TC-88 engine.
Single Plug: One spark plug in each head. Total of 2 spark plugs in one engine.
Dual Plug: Two spark plugs in each head. Total of 4 spark plugs in one engine.
VT No. 32-0712
32-0712
Volt Tech Replica Single Fire Coil

32-1233 32-1234 32-1065 32-0812
32-0743
32-0585 32-1085
12-0586
32-1066 32-0978
Volt Tech Molded Coil features black late shape with bobbin
type windings. 2000-up replacement coil with OE style con-
nectors. 32-0474 32-0484
32-1233 31639-95 1995-98 EFI
32-1234 31639-99 1999-01 EFI
32-0743 31655-99 2002-06 Carb
32-1065 As Above Dynatek Carb
32-0812 31743-01 2002-06 EFI
32-1066 As Above Dynatek EFI 32-0467
32-0585 31696-07A 2007-16 FLT EFI V-TechTM Single Fire Coils features 45 kv with 1 spark for
2007-17 EFI each cylinder as fired and will mount to stock bracket and
FXST, FLST, FXD accept stock type coil covers. Works with most aftermarket sin-
32-1085 As Above 2007-up EFI gle fire ignition systems.
32-1456 3160017 2017-up FLT EFI VT No. Finish
1. 12 volt wire from ignition switch is connected to center post
2018-up FXST 32-0467 Black along with red wire from ignition.
12-0586 7638 Coil Stud Nut 32-0474 Chrome 2. Connect the black wire to outer post from front cylinder.
32-0484 Orange 3. Connect the white wire to other outer post for rear cylinder.
Volt Tech Coil Set is single
fire, angle type. Coil set fea- 45 KV Coil Kit includes coil
tures orange finish, 3.0 ohms. and cover. To mount on stock
VT No. 32-0484 1984-99 Softail .
VT No. 32-0749
32-0484
326
Ignition Coils
Accel Dual Fire H.V. Super Coil. 32-7802 Accel Single Fire Super
BIG TWIN
High performance bolt on for electronic ignition sys- Coil features ultra fast coil
tems. High-tech molding for exact fit on 1965-99. 2.3 rise time with voltage out-
ohms. put 45% higher than stock
VT No. Type and 3.0 ohms of primary
32-7772 Yellow resistance. Mounts to
32-0090 stock coil bracket and fits
32-7801 Chrome
under stock coil covers on
32-1141 1980-99 Twins.
32-1140
VT No. Type
32-0090 Yellow
32-7802 Chrome
32-0132 32-7536
The Accel Stealth Coil eliminates the need for ignition wires
forever by mounting the coils directly to the spark plugs for
maximum spark energy to the plugs. An aluminum finned cover
holds the coil in place and acts as a functional heat sink to pull Accel High Energy Dual Fire Coil is a very high KV energy
heat away from the cylinder heads. All wiring is hidden in the output requires that it be used with our extreme service 8.8mm
fins of the head for a clean, custom look. Available with nature silicone racing wires. Each coil is complete with two 8.8mm
or black finned heat sink. wire leads and appropriate chrome brackets.
Natural Black Fits VT No. Item
32-1141 32-1140 2002-08 All FLT models with EFI 32-0132 Kit 1965-87
32-1142 32-1143 2001-17 All FXST models with EFI 32-7536 Wires only
2009-16 All FLT models with EFI 32-9264 Dyna Twin Fire
2004-17 All FXD models with EFI Ignition Coils are
designed to work
32-7789 32-7792 C with Dyna 2000
HD-I ignition mod-
32-9285 ules. Twin fire coils
B are slightly larger than stock coils and fit the stock mounting
bracket. Twin fire coils can be used with any electric advance
A 32-8055 ignition system that incorporates dwell control, except Dyna
Dyna Application DS6-2 or similar type ignitions.
DC6-5
DC6-4
All FXR-FXST and Dynaglide models
Dual Spark Plug Head Application VT No. Dyna Ohms/Type
32-9285 DC6-5 3 (A)Twin Fire II Miniature Dual Output
Dyna Coils. 35,000 volt! Works with all points ignitions, after- Towers, Replaces DC6-3
market or factory electronic ignitions. Note: 32-7792 is electron- 32-9264 DC6-4 3 (B) Four output towers
ic, 32-7793 is for points ignition. Fits Dual Spark Plug
VT No. # Volt Ohm Dyna Type U/M
32-7789 A 12V 3 DC-1 Angle, Dual Pair 32-9342 32-9343 32-9344
32-7790 A 6V 1¹⁄₂ DC-2 Angle, Dual Pair
Use 2 for dual plug heads
32-7792 C 12V 3 DC-6 Stock, Dual Each
32-7793* C 12V 5 DC-7 Stock, Dual Each 32-9341
32-8055 B 12V 3 DC-3 Angle, Single Pair Dyna 0.5 Ohms Miniature Coils for TC-88. These coils are
32-8086 A 12V 5 DC-8 Angle, Dual Pair designed for use with Dynaglide TC-88 series ignitions and
32-9035 B 12V 5 DC-10-1 Angle, Single Pair should not be used with Dyna S Ignition Systems. TC-88 mini-
*Note: Use 2 for single fire ignition. coils feature dual or single output towers, .5 ohms primary
Twin Tec 3 Ohm Single resistance, measure 4.2” x 2.3” x 1.6”, mounting centers of 2.9”
Fire Mini Coil Kit fea- minimum to 3.5” max and black housing.
tures compact design 2.4” VT No. Output Type U/M Dyna#
x 2.3” x 1.6” (not includ- 32-9341 Dual Pair DC11-1
ing terminals and tower) 32-9342 Dual Each DC11-2
and is compatible with 32-9343 Single Pair DC12-1
most single fire ignition 32-9344 Single Each DC12-2
systems. Kit includes two
Single Fire: Just the spark plug for the piston that is in its compression stroke will be fired.
coils, universal wire set The other piston, being in its overlap position will not be ignited.
and terminal ends. Dual Fire: Both spark plugs are fired simultaneously at the time only one piston is in its com-
pression stroke.This is the way the stock motor works on pre TC-88 engines.
VT No. 32-1015 Single Plug: One spark plug in each head. Total of 2 spark plugs in one engine.
327
Spark Plug Wire Set 32-1041 32-1042
32-0647 32-0648
7 mm Sifton 8mm Universal Wire Set features carbonite suppres-

sion core cut to 2 24” lengths.
7 mm 32-0651 VT No. Color
32-1041 Red
32-1042 Black
32-9248 42” Accel 8.8 Wire Sets have the ends
32-0650 terminated with a 90° or a variangle boot
and come with a hardware kit which
32-7133 32-0696 includes terminals, boots and instructions.
VT No. Color Type
32-9248 Black Variangle Suppression
32-9250 Black 90° Suppression
32-1123 32-9252 Yellow Variangle Suppression
32-9253 Yellow Variangle Copper
32-9254 Yellow 90° Suppression
Volt Tech Universal Wire Sets are 40” long with double 90° 32-7536 Yellow 90° Copper
spark boots. Simply cut to the desired length and install coil ter- 32-9360 32-9363
32-9361 32-9362
minal clips supplied. Available in copper or suppression core.
VT No. Color Type 32-0651 Black Suppression
32-0647 Yellow Suppression 32-1123 Red Suppression
32-0648 Yellow Copper 32-7133 Red Copper, 5 pack
32-0650 Orange Copper 32-0696 Black Copper Accel Thundersport 5mm Ignition Wire features half the
32-1463 Yellow Copper diameter of stock wire and is extremely flexible. Easy to run
Accel Spark Plug Wire through cylinder heads, rocker covers and frame tubes for a
Accel 8.8mm Custom-Fit Ignition Wire hidden look. Packaged with two 5 foot leads, coil ends and
Sets are available in 300+ or custom fit. 90° spark plug end. Coil end must be terminated. These wires
are a 5 mm high gloss silicone wire that is rated for over 550°
8.8 mm F and 150 ohms per foot.
VT No. Color
300+ Custom 32-9360 Black
Black Yellow Black Type/Fits 32-9361 Yellow
32-9101 32-0656 32-8044 1984-90 all FXST, 32-9362 Red
1985-86 FX, 1991-99 Dynaglide 32-9363 Blue
32-9103 — 32-8048 1982-94 FXR-FXRS-FXRT Spark Plug Wire Clamps
32-9107 — — 1985-90 FLT-FLHT available in pairs for 7mm or
32-9106 — 32-9022 1991-99 all FXST 37-9062 8mm.
32-9107 32-9023 32-9024 1985-99 all FLT Chrome Size
32-9109 — — 2000-17 all Dynaglide 37-9062 7mm
32-9111 — — 2000-17 all FXST 37-2911
37-2911 8mm
32-9110 — — 2000-16 all FLT
32-9108 — — 1994-98 FLHR
32-9193
8 mm Blue Streak XXX Silicone Wire Sets features quality 32-9191
construction of silicone throughout the jacket, insulation and
core. This assures high temperature resistance and high dura-
bility. Silicone wire sets also offer maximum RFI suppression. 32-9190
Copper core wire sets are for point type ignition systems only 32-9192
and feature a copper core wire to allow for special improved
electrical conductivity and mechanical strength. All wire sets Accel 8mm S/S Spiral Core Ignition Wire Set
• Designed specifically for Harley-Davidson Milwaukee 8, Twin Cam
are supplied with electrical boots and OEM style terminals that • Delivers up to 5 times more peak energy than other "Performance Wires"
lock onto the spark plug. • Maximum RFI protection to shield sensitive electronics with 500 Ohms per foot
• Spiral core wire utilizes stainless steel alloy conductor with fiberglass/Kevlar inner core for strength
VT No. XXX Silicone Sets • Lower resistance delivers more energy to the spark plug
32-0253 Universal Application Self Make Kit • Custom fit sets are ready to install-no cutting or crimping required
• Fully capable with Delphi fuel injection system
32-0254 1980-84 FLH, 1985-99 FXST, 1991-98 FXD
Model Year Black Blue Red Yellow
32-0255 1985-96 FLT, FLHT, FLHR
FXST - All Models 2000-17 32-9170 32-9171 32-9172 32-9173
32-0256 1982-99 FXR Excluding Rocker, Blackline and Breakout
32-0258 1997-98 FLHT, FLHR FXST - 2018-up 32-9194 32-9195 32-9196 32-9197
Rocker, Blackline and Breakout
32-0259 1999-16 FLT, FLHT, FLHR
32-0260 1999-17 Dynaglide FXD w/Carb or EFI 1999-17 32-9178 32-9179 32-9180 32-9181
32-0262 2000-17 FXST FLT - All w/carb 1999-08 32-9162 32-9183 32-9184 32-9185
FLT - All Models 2009-16 32-9186 32-9187 32-9191 32-9188
8 mm FLT - All Models 2017-18 32-9190 32-9191 32-9292 32-9193
328
Sumax
Spark Plug Wire Set
BIG TWIN
Black w/Blue Tracer Red w/Black Tracer
32-2064
32-2024
Yellow w/Black & Red Grey w/Brown Tracer Orange w/Black Tracer 32-2004 32-2044
Black w/Blue Tracer
Red w/Black Tracer 32-2033

Yellow w/Black & Red
Grey w/Brown Tracer Sumax Colored 8mm Plug Wires by Taylor are pre-cut and have the plug/
coil boots and terminals already installed. Designed for electronic ignition, but
Orange w/Black Tracer
work great on point types.
Sumax Braided Cloth Spark Plug Wires. 7mm Black Silicone with synthetic
jacketing resists heat, oil and abrasion. A combination Kevlar Helically Spiral 1984-99 1982-
2000-17
2018-up
1999-06
1999-08
Wound Core at 350 ohm per foot resistance delivers greater spark energy, while 1980-98 FXST- FL with 2009-16 2017-up
Color FXST 94 FXST/ FLT with
FLT FLST- Carb FLT FLT
improving power, idle, and fuel efficiency. Cloth Jacket is rated at 450°F and FXD FXR
FXD
FLST
Only
EFI
resists heat, oil and abrasion. These wires will work on all models with point or
electronic ignitions. Custom fit and universal sets available. Universal sets avail- Red 32-7231* 32-7233 32-2023 32-7379 32-2024 32-2017
able with black 90° plug boots or straight rajah boots. Purple 32-2033
Blue 32-7631* 32-2063 32-7380
1989-98
1999-17 Black 32-7035 32-7033 32-2003 32-7381 32-2004 32-2016 32-2018 32-2035
Universal FXST/ 1999-08 1999-08 2018-up
Universal 1980-98 FXST/ 2009-19
w/Straight FLST, FLT w/ FLT w/ FXST/ Color Yellow 32-2043 32-7382
w/90° Boot FLT FLST/ FLT
Boot 1991-98 carb EFI FLST
FXD *Note: with coil adjacent to oil tank Dynaglide.
FXD
Black w/Blue
32-7364 32-7365 32-7336 32-7341 32-7359 32-7344 32-7354 32-7374 32-7349
Tracer
32-5202 32-0031
Red w/Black
32-7366 32-7367 32-7337 32-7342 32-7360 32-7345 32-7355 32-7375 32-7350
Tracer
Yellow w/
32-7368 32-7369 32-7338 32-7343 32-7361 32-7346 32-7356 32-7376 32-7351 Black & Red
Tracer
Grey with
32-7370 32-7371 32-7339 — 32-7362 32-7347 32-7357 32-7377 32-7352
Brown Tracer
Orange w/
32-7372 32-7373 32-7340 — 32-7363 32-7348 32-7358 32-7378 32-7353
Black Tracer
Sumax Thunder Volt 50 Black Wire Sets feature a ferrite

32-6081 32-6281 32-6681 spiral wound coated core that is a blend of copper/nickel alloy
bonded by a conductive acrylic latex cover. This process is
designed to reinforce and assist in holding core resistance
to 50 ohms. The fat 10.4 mm (.409”) wires also feature three
layers of pure zimplex silicone, 600 degrees of heat protec-
tion, 102,000 volts dielectric strength with a tightly woven heat
treated fiberglass braid and black pro boots bonded to the
black with gold lettering wires.
32-6381 32-6085 8.2mm 10.4mm Fits
32-5202 32-0031 1984-99 FXST, 1991-98 Dynaglide
32-5206 1980-98 FLT
32-5207 32-0035 1984-94 FXR
32-5208 32-5608 24” Universal 2 Piece with 90° boot
32-2031 2000-17 FXST, 1999-17 Dynaglide
32-5209 2009-16 FLT
Sumax Universal 8mm Pro Spark Plug Kits feature 24” wire 32-5205 32-5203 1999-08 FLT with Fuel Injection
leads with either 90° or 180° molded plug boots and straight coil 32-5210 12” Universal
boots with brass terminals. Wires feature the Spiro-Pro design
which provides 10 times the firepower of carbon core wires and
heat protection to 600°F. Works with electronic or points style
ignition. All wires have a resistance factor of 350 ohms/ft. Great
for magnetos, distributors or dual plug heads.
VT No. Color VT No. Color
32-6081 Black 32-6681 Blue
32-6281 Red 32-6381 Purple
32-6481 Yellow 32-6085 Black (Note: 180° Kit)
329
Spark Plug
Champion Copper Plus. Sold in 4 pack unless noted. Spark

Plug gap measures .040.
Copper Plus
VT No. Engine Fits HD# Champion
32-7547 TC-88 1999-17 FXST, FLST, 6R12 RA8HC
FXD
1999-16 FLT
32-7540 Evo 1984-98 FL Evo 5R6A RN12YC
1340 1985-98 FX Evo
1984 FXR
32-0160 Shop Pack of 24 RN12YC
V-Twin Performance Spark Plugs features a copper core 32-9232

electrode for a longer service life, nickel plated housing, 95%
pure alumina insulator and a heat crimping process to ensure
a leak free seal.
VT No. Fits Replace#
32-6691 1999-17 Twin Cam; FXST, FLST, FXD 6R12 Autolite Platinum Plugs.
1999-16 FLT VT No. Autolite# Fits
32-6692 1984-98 Evolution 5R6A 32-9231 AP4265DP2 1984-98 1340cc V-2 Evolution
32-6693 As Above One Heat Range Hotter 32-9232 AP4164DP2 1999-up TC-88, 1999-up FXST, FLST,
32-6694 As Above One Heat Range Colder FXD, 1999-16 FLT
Autolite Standard Spark Plugs
Accel Spark Plug Set is
10 Pack Pair Autolite# H-D# Fits
U-Groove features a U-shaped
32-9295 — 4164 6R12 1999-up TC-88
electrode, sintered alumina
1999-16 FLT, FXST,
insulator and a copper/nickel
FXD
alloy electrode. Gap is .040.
32-9297 32-9298 4265 5RL, 1984-98 All V-2
Fits 1975-81 FL-FX Evo.
5R6 Evolution
VT No. 32-0144
5A6A
Spark Plug Cover

Chrome Covers 32-1552
Blue Lightning Bug Spark Plugs
are neon gas filled and glow as
strobe lights. Fit plugs with screw
terminal fittings only, sold in pair.
VT No. 32-1552
Chrome Head and Spark Plug Cover fits 1986-99 Evolution

models. Covers are held in place by rubber inserts supplied.
VT No. 42-0929
Sparkies are chrome die cast cov- Chrome Big Twin Case Trim fits Evolution
ers to fit perfectly on a spark hex for 1985-99 1340 Big Twin by mounting to
Big Twin 14mm, pair. center case stud. To install adjust stud
VT No. Years length for more length on left side, then
37-8952 1948-1999 press emblem over nut and attach by
32-1670 1999-2012 chrome acorn nut which is supplied.
VT No. 42-0746
Single Fire: Just the spark plug for the piston that is in its compression stroke
will be fired.
330
42-0748 42-0106 42-0088 42-0177
Ignition
Points Cover
BIG TWIN
42-0462 42-0465
42-0299 42-0119 42-0662 42-1058
42-1059 42-0155 42-0125 42-0960 42-0065
42-0162
2-Hole 5-Hole Style
42-0961 42-6100 42-0081 42-0562 42-0748 42-0969 Flame, chrome
42-0106 42-0889 Live to Ride, chrome
42-0088 42-0836 Live to Ride, gold inlay
42-0177 42-0178 Baron, chrome
42-0035 — V-Tech
42-0299 42-0119 Dome
42-0662 42-0146 Flat
42-1082 42-1116 42-1125 42-0474 42-1058 42-1059 Skull
42-1078 42-1079 Skull
42-0065 — Flame
42-0155 42-0125 Smooth
42-0960 42-0044 Maltese, flat
— 42-0961 Maltese, raised
42-6100 42-6055 Maltese, raised
42-0475 42-0189 42-0198 42-1145 42-0081 42-0075 3D Skull face
42-0560 42-0562 3D Skull, black
— 42-1082 Skull, chrome, black highlights
42-1116 — Black smooth
42-1125 42-1119 Black, perforated
— 42-1122 Black, flames, natural aluminum
— 42-1123 Black, ball milled
42-1166 42-6055 42-1384 42-1383 — 42-1093 Chrome, perforated
— 42-1094 Chrome, contour
42-1095 42-1096 Chrome, ball milled
42-0581 — Skull with chrome skull
42-0474 42-0472 Chrome, flame
42-0475 42-0473 Black, flame
42-0189 42-0197 Smooth, black
42-0198 42-0196 Smooth, chrome
42-1385 42-1381 — 42-1144 Grooved, chrome
— 42-1145 Grooved, black
42-0956 42-1148 — Grooved, chrome
42-1166 — Grooved, black
42-0162 — Iron cross spinner
42-0956 42-0957 Hidden mounting
42-1195 — V2 Alloy
42-0465 42-0462 Chrome with black mesh fame
42-0956 42-1383 42-1381 Chrome air flow
42-1384 42-1382 Black air flow
42-1385 — Chrome air flow
42-1386 — Black air flow
42-1195
— 42-1546 Black Contrast Cut
— 42-1389 Chrome domed nostalgic
— 42-1390 Black domed nostalgic
8765-2 9954-5 Screws, chrome allen
8402-2 Screws, chrome acorn
42-1382 42-1390
331
Carb Ignition
Advance Unit 32-0136
32-7773
32-0150
Points Conversion Kit. Both brands include everything nec-
essary for direct replacement on 1970-78 Big Twin, 1971-78
Sportsters or for converting late model electronic-type back to
points. Accel type available with microchip points, which will
require a domed shaped points cover such as VT No. 42-0299 to
Blue Streak Sifton “Tuneable” Ignition Advance Assembly
accommodate taller points. The V-Twin unit includes stock style
includes stainless advance base, points plate with “Blue Streak”
points and condenser. 32-0150 available with needle bearing
points and condenser with hardware and 3 pairs of color coated
weights.
springs which allow full advance at 1400, 2000 and 2600 RPM
VT No. Item Type
depending on which spring is selected.
32-7773 Accel with Microchip Stock
VT No. 32-0713
Advance Unit features machined stain- 32-0136 V-Twin with Points Stock
less steel shaft and plate, metallic coated 32-0150 V-Twin/Points Needle
weights and special wound springs for 32-0760 32-0049 Points Plate Screws.
exact advance. For 1970-84, mechani- VT No. Type
cal advance applications. Center screw 32-0760 Stainless
included. 32-0049 Zinc
VT No. 32-9037
Stainless Advance Unit features
32-9220 stainless base, heat treated weights
and cam center screw for 1970-up
mechanical advance ignition.
VT No. Item Brand
32-9261 32-0178 With Bolt Sifton
32-0168 Without Bolt V-Twin
Tuneable Advance Unit features stainless base, heat treated
weights cam bolt and 3 different color coded spring sets which 32-0055 Advance Units feature
32-7510
allows full advance at 1400, 2000, and 2600 RPM depending heat treated weights
on which springs are selected. Can be used with all ignitions, and steelbase. Order
points, single or dual fire types which utilize an advance unit. center bolt separately.
Springs also available separately. VT No. Type
VT No. Type 32-7510 Advance
32-9220 Stock 32-0055 Center bolt
32-9261 Needle Bearing 32-0157 Blue Streak Premium
13-0121 Stock Springs, Black Parts for 1970-78 Twins.
13-9246 Heavy VT No. Item
13-9247 Severe 32-0156 32-0156 Points
32-0157 Condenser
32-0140
13-9247 13-9246
13-0121
Automatic Advance Rebuild Kit includes two springs, two
weights, and roll pins. For all 1970-78 Twins.
VT No. 32-0140
1970-up Advance Weight Springs.
32-0178 VT No. Fits
13-9247 Severe Duty Advance Weight Springs are for all
high compression and heavily modified engines.
32-7504
Also useful for applications experiencing
Advance Unit detonation (pinging) or very erratic idle,sold as a pair
VT No. Item 13-9246 Heavy Advance Weight Springs for slightly
32-7504 Assembly w/ contact point & condenser modified stock, low compression or mild stroker
32-0178 Weight, spring and stainless steel shaft & plate application, helps cure minor idle problems, sold as
Warranty pair
All Electrical Components sold as individual pieces or in kits are covered under our warranty
“Replacement Only” Provision. All electrical related item part numbers begin with a 32 prefix. 13-0121 Original type replacement. Uses premium
No credit will be issued for these items as they are exchange only. grade spring steel, 10 pack
332 see note for important information regarding emission control regulatory compliance and warranty information.
Ignition Kit and
Sensor Cup Kit includes special screw to fit
all “Sensor” type ignition kits. Fits 1995-up.
VT No. 32-9124
32-9124
Advance Unit
BIG TWIN
Accel Late Model Super Coil for late model
Twins with carburetor. Features faster rise
32-9083 time, higher voltage, maximum spark and
energy to spark plugs for quicker starting,
Vacuum Switch Assembly
improved idle and crisper throttle response.
VT No. OEM Fits
Fits in OEM location and is available in black finish. Fits
32-9079 26557-83 1984-90 All FXR
2000-02 FXST-FLST, 2000-05 FXD, 2002-06 FLT with carbu-
32-9080 26558-84 1984-90 FXST 1986-89 All FLT
retor.
32-9083 26566-91 1991-95 All FXST-FLST,
VT No. 32-1810
Dynaglide and FXR 32-0469 32-0468
32-0518 32-9020
V-Tech Ignition Kits are available in dual fire where there

are two sparks at the same time and single fire where there is
one spark for each cylinder when it is fired, separately. Each kit
Ignition Sensor Plate Assembly. includes a mechanical advance unit and all hardware. Order coil
VT No. OEM Fits separately VT No. 32-0467 coil has two separate coils inside to
32-9020 32400-80A 1980-93 FLT, 1980-94 FXR fire independently.
1984-95 FXST VT No. Type Coil
32-0518 32404-90 1991-95 FXD 32-0468 Dual Fire 32-0511
32-0519 32400-94 1994-95 FLT 32-0469 Single Fire 32-0467
Unilite Breakerless Ignition System for all
1970-99 Twins. Dual fire unilite module fea-
tures integrated photo coupler, signal proces-
sor and power switch. Requires mechanical
advance assembly and ignition coil with 3.0
to 4.0 ohms.
VT No. Item
32-5119 Ignition System
32-7510 Mechanical Advance
Advance Unit Rebuild Parts. Points Ignition Wire Chrome Clamps.
VT No. OEM # Item VT No. 37-9014
32-7510 32505-78A Rotor and Weight Assembly
12-1163 615 1 Roll Pin Breaker Plate 37-9014
12-1164 620 2 Roll Pin Breaker Weight
12-1162 623 3 Roll Pin, Breaker Plate 32-0474
12-1152 8699 Pop Rivet for Cover 32-0467 32-0467
37-8809 1047,7115 4 Point Mount Plate Washer
6189W and Screw Assortment
32-0055 3570 5 Timing Screw
32-0138 32522-70 8 Weight Set
32-0053 32542-70A 9 Cam only
32-0549 32577-70 10 Breaker Base Assembly
32-0051 32601-78 11 Plate Mount Stud 1970-81
2745-2 As Above Colony, Zinc
32-0049 32606-82 11 Plate Mount Stud 1982-up
32-0054 As Above 11 Oversize with 12/24 threads for
Stripped out Covers V-TechTM Single Fire Coil gives one spark for each cylinder as
13-0121 32605-70 12 Springs fired and will mount to stock bracket and accept stock coil cover.
32-0042 32618-70A 14 Mount Plate only VT No. Finish
32-0118 32661-70 17 Ignition Point
32-0411 32670-70 19 Terminal Kit 32-0467 Black
32-0121 32726-30A 20 Condenser and Bracket 32-0474 Chrome
32-1557 70456-73 21 Point Lead Wire 32-7805 32-1012
37-8971 10046 22 Point Lead Wire Clamp
Dyna Ignition Booster is for single S&S Spark Technology Ignition System
points systems only. It transforms incon- Installation Kits Only
sistent electrical surges into controlled Installation Kit Only for carbureted models
bursts of energy so that the coil power 32-7805 2004-2006 TC-88
is not wasted. VT No. 32-7787 32-1012 1999-2003 TC-88
32-1049 1995-1999 Evolution Big Twins
333
Ignition
32-9500
Dyna 2000 Digital Ignition Systems. Systems include Dyna

2000 HD-1 Ignition Module and a matched Dyna Twin Fire Coil
for each application.
VT No. # Fits 32-9501
32-0802 SFK-3 1996-99 FXST, FLST, 1996-98 FXD, L94-98 FLT V-Tech Ignition Systems fit all 1970-98 carbureted models
32-0804 SFK-1 Pre1991-95 FXST, FLST, 84-94 FXR, 91-94 FLT and requires sensor cup for 1982 and earlier applications.
32-9113 Order tach interface, sensor cup and screw separately if
required. Note: Order Coils As Required.
VT No. Fits
32-9501 Dual Fire Ignition fits Evolution, Shovelhead and
Sportster through 1997. It can be set for Street or
Race-Electric Start or Kick Starter. Includes 4000 to
Dyna 2000 Ignition Modules Replacement can be used 8000 adjustable RPM limiter and adjustment for rate of
with stock electronic ignition. advance. This unit is compatible with stock dual fire
Note: The stock ignition consist of a sensor plate and coils.
rotating cup. The 2000 will work on all 1970-up models but 32-9500 Single Fire Ignition fits Evolution, Shovel and Sportster
requires the 1983-up type ignition cup and sensor plate. The through 1997. It can be set for Street or Race-Electric
2000 Advance curves will not work properly if installed with or Kick Starter includes rear cylinder timing adjustment
the pre1983 ignition cup and sensor. Dyna 2000 HD-1 can be for rate of advance. Compatible with single fire coils.
used with both single fire (separate coils) or Dual fire (Single 32-9503 Single Fire Ignition Kit fits As Above
Coil). The Dyna 2000 HD-2 can be used as dual fire only. Includes coil and 8.5mm wires.
Both units feature programmable advance curves,rev limiter 32-0588 8.5mm Wire Set
and LED diagnostic lamp for easy static timing and plugs Notes for installation: Notes for installation:
into stock harness and bolts to stock module location. Also 32-9501 32-9500
Red = Positive (coil) Red = Positive (coil)
available with USB port that will allow mechanics or tuners Black = Negative (coil) Black = Negative (front cylinder coil)
White = Negative (rear cylinder coil)
more advanced programming but requires separate purchase Brown = Tach Green = Voes (vacuum switch)
of Dyna Programming kit. Note: Can only be used with sup- White = Topped Up (not used) Brown = Tach
Green = Voes (vacuum switch)
pression spark plug wires. On 1984-90 models Dyna exten-
sion harness must also be used. Unilite Breakerless Ignition System for all
VT No. Item/Plug Years 1970-99 Twins. Unilite Dual fire module fea-
32-9113 Dyna 2000 HD-2E, 7 Pin 1984-95 tures integrated photo coupler, signal proces-
with USB Port sor and power switch. Requires mechanical
32-9114 Dyna 2000 HD-1E, 8 Pin 1996-99 advance assembly and ignition coil with 3.0
with USB Port to 4.0 ohms.
32-1074 DD2000-HD7EFI 2010-16 FLT with EFI VT No. Item
32-1075 DD2000-HD8EFI 2007-11 FXST, FLST with EFI 32-5119 Ignition System
32-1076 DD2000-HD9EFI 2012-up FXST, FLST with EFI 32-7510 Mechanical Advance
32-9087 Ignition Cup Only 32-1732 S&S H1-4N Multi Function
32-9020 Sensor Assembly Performance Ignition features one
32-9052 Cup Screw, 10 pack piece machined aluminum housing, BCD
32-9117 Programming Software for 32-9113 switches with solid detent and legible
32-9118 Programming Software for 32-9114 markings, which allows easy adjustments
32-9119 Programming Software for TC 88-2P VT No. Item of mode. Advance rate and rev limit, sin-
32-9264 32-1731 HI-4N Ignition gle or dual fire operation and initial timing
32-1732 HI-4N Kit marks that allows precise adjustment.
Fits 1970-99 XL. Also available as an
ignition kit which includes HI-4N ignition,
32-9285 single fire coil and 8.5 mm plug wire set.
Dyna Application
DC6-5 All FXR-FXST and Dynaglide models 32-0086
DC6-4 Dual Spark Plug Head Application
Dyna Twin Fire Ignition Coils are designed to work with 32-0085
Dyna 2000 HD-I ignition modules. Twin fire coils are slightly
larger than stock coils and fit the stock mounting bracket. Ignition Module Adapters allow use of seven pin module
Twin fire coils can be used with any electric advance ignition (1991-93) going to eight-pin Deutsch (1994-99) wiring harness
system that incorporates dwell control except Dyna DS6-2 or or an eight pin module going to a seven pin harness. Cannot
similar type ignitions. be used on electronic fuel injected models.
VT No. Dyna Ohms/Type
32-9285 DC6-5 3 (A)Twin Fire II Miniature Dual Output VT No. Fits
Towers, Replaces DC6-3 32-0085 7 Pin Adapter to 8 Pin Module
32-9264 DC6-4 3 (B) Four output towers 32-0086 8 Pin Adapter to 7 Pin Module
Fits Dual Spark Plug
334
Dyna ‘S’
Hi-Performance
Ignition System is
Ignition
BIG TWIN
self contained, fits Dyna S Performance Ignition Systems.
behind ignition cover, Available in dual or single fire for street
uses magnetic rotor applications only. Each kit includes sensor
with the original spark plate assembly and correct coil for each
advancer, so factory application. Single plug only. 1980-up
advance curve is applications require 32-7510 advance
maintained. Improves performance, extends spark plug life, mechanism.
eliminates points and condensers. Note: For dual plugged VT No. # Type
heads, on 1980-up use advance mechanism, VT No. 32-7510 32-0800 DSK-6-2 Single Fire
VT No. 32-7778 (DS6-1) 32-0801 SDK-6-1 Dual Fire
Dyna ‘S’ Replacement Rotor for Dyna Ignitions.
Single Fire VT No. Fits
Ignition has 32-9300 DS-6-1
the features 32-9301 DS-6-2
of the Dyna
’S’, but fires 32-7792
front and A 32-7789 32-7790
rear cylinders
independently
of each other which allows accurate timing of each cylinder.
Stock ignition systems fire both cylinders at the same time
which has the wasted sparks on the exhaust stroke. This C
eliminates this inherent problem. For use with either dual or
single plug heads. On 1980-up models, use VT No. 32-7510
32-7793 32-8055 32-8086
Advance assembly.
VT No. 32-7777 (DS6-2)
32-9151 32-9151
B
K.V. Recommends the following coils for Dyna Ignitions:
DS6-1 Ignition VT No. 32-7778
Street, Single plugs use DC-7 or DC-8
Race, Single plugs use DC-1 or DC-6
Street/Race Dual plugs use 2 DC-2 or DC-5, wired in series
32-9035
32-9152 32-9153 Race, Single plugs use 2 DC-3
Street, Dual plugs use 2 DC-7 or DC-8
Race, Dual plugs use 2 DC-1 or 2 DC-6
Street, Single plug uses 2 DC10-1
Dyna Coils generate 35,000 volts and work with all points
ignitions as well as aftermarket or factory electronic ignitions.
Note: 32-7792 is electronic, 32-7793 is for points ignition.
32-7789 A 12V 3 DC-1 Angle, Dual Pair
32-7790 A 6V 11/2 DC-2 Angle, Dual Pair
Dyna 2000i Digital Ignition available as a module only or com-
Use 2 for dual plug heads
plete kits that include correct coil. Features include single or
32-7792 C 12V 3 DC-6 Stock, Dual Each
dual fire operation, 8 advance curves, built in tach driver, adjust-
32-7793* C 12V 5 DC-7 Stock, Dual Each
able RPM limit from 6000 to 7500 and easy static timing with
32-8055 B 12V 3 DC-3 Angle, Single Pair
built in timing indicator. Fits all 1970-98 carbureted models and
requires 1983-up sensor cup for 1982 and earlier applications.
32-9035 B 12V 5 DC-10-1 Angle, Single Pair
Advanced Programming Software allows the mechanic or tuner
*Note: Use two for single fire ignition.
the ability to fine tune 2000I Ignition but requires adapter.
Dyna Electric Tachometer Adapter Kit must be
VT No. Item Plug Fire Coil
used with Dyna ‘S’ single fire ignition is installed
32-9151 Kit Single Single DC3-1
on any twins when electric tachometer is used.
32-9152 Kit Dual Single DC1-1
VT No. 32-7799
32-9153 Kit Dual Dual DC2-1
32-9155 Kit Single Single DC6-5
32-9159 Module Only
32-9087 Sensor Cup
32-9052 Cup Screw, 10 pack
32-9120 Advanced Programming Software for
Above Ignitions
335
Daytona Twin Tec 32-3017 32-3018
Carb Ignition
32-3015 32-1036
Daytona Twin Tec Internal Ignition Kit has a billet aluminum
housing with wide timing advance adjustment range which
accommodates stock to highly modified engines. Kit includes
ignition, coil and spark plug wire set.
VT No. Fits
32-3015 84-99 FXST, 86-99 FLST, 82-94 FXR, 91-99 FXD
32-3054 As Above ARB E.O. No. D-641-1 Daytona Twin Tec External Ignition Kits for 1990-98
32-3088 Evolution Big Twin and 1990-97 Sportster models. Kits include
module, coil and spark plug wire set.
VT No. Fits Item
32-3017 1990-94 Evolution Kit
32-3018 1995-98 Evolution Kit
32-1036 1984-99 Evolution Module Only
Twin Tec Internal Ignition for 1970-97 models.
32-3089
Two advance curve families with adjustable
advance slope accommodate stock to highly
modified engines. Features digitally set RPM
Limit (100 RPM Steps) and selectable single or
dual fire mode. Coil outputs protected against
short circuits.
32-3059 VT No. Item
32-1005 Ignition
32-2013 3 Ohm Single Fire Coil
Daytona Twin Tec TC-88 Ignition Kits for all 1999-up TC-88 32-1014 32-1008
carbureted Big Twins include module, coil and spark plug wire Twin Tec External Ignition for 1999-06 Carbureted Twin Cam
set. Models. Wide timing advance adjustment range accommodates
VT No. Fits stock to highly modified engines. Features digitally set RPM Limit
32-3088 1999-03 (Does not include software and cable) (100 RPM Steps). Selectable multi-spark mode for quick starting
32-3057 As Above ARB E.O. No. D-641-1 and smooth cruise. Coil outputs protected against short circuits.
32-3089 2004-06 (Includes software and USB cable) Billet aluminum housing with black anodized finish. Easy plug-in
32-3059 As Above ARB E.O. No. D-641-1 installation supports all sensors including theft/security module.
VT No. Years
32-3047 32-3048 32-1008 1999-03 TC-88 Carburetor Only
32-3056 As Above, Note: ARB Complaint E. O. No. D-641-3
32-1014 2004-06 TC-88 and XL Carburetor Only
32-3058 As Above, ARB Complaint E. O. No. D-641-1
45 KV Single Fire Coil Kit
Daytona Twin Tec External Single Fire Ignition Conversion includes coil and cover to fit
Kit includes 50 state street legal selectable ignition module, 1984-99 Softail models.
sensor plate, rotor cup and adapter harness that allows use of VT No. 32-0749
tachometer and single fire coil. Allows use of external ignition
on all 1970-1999 carbureted only Big Twins and 1971-2003 XL
models. Helps prevent heat related ignition failures by replacing
heat sensitive internal nose-cone style ignitions. Also available
as complete kit with correct 3.0 ohm single fire coil and plug
wire set.
VT No. Item
32-3047 Conversion Kit
32-3048 Complete Conversion Kit with Coil and Wires
336
Dyna Tek
Power Commander V
32-0842 Fuel and Ignition Timing
Control for each cylinder.
Rev Xtend feature increas-
BIG TWIN
es stock rev limiter. Switch 32-3033
between two maps “sent on
the fly” can be adjusted on a
“per gear” basis and allows
for one map per cylinder
per gear if required. Adjustment of fuel and timing is based on engine
temperature provided by the cold start feature. Will power up with 32-3046
USB cable only for programming. Note: Not legal for use on pollution
controlled vehicles.
VT No. Fits Dyna Tek FI Controller is a plug module that offers 3 user
32-0842 2007-11 FXST-FXCWC-FLSTF selectable base fuel curves that are designed to improve
engine operation and can be modified to suit a wide variety
32-0843 2009-11 FLSTC/FLSTN
of modifications. Fuel mixture can be enriched or leaned as
(plastic mount tray included) required. The Dyna FI controller uses the factory connectors
32-1961 2006-11 FXD for easy installation and there is no PC required for tuning or
32-1039 2012 FXST, FLST adjusting the fuel curves. There are no modifications required
32-1043 2012 FXD to the stock ECU and removing the Dyna. FI controller returns
32-1048 2013-17 FXD the vehicle to the factory configuration.
32-3037 VT No. Fits
32-3023 2002-05 FLT TC-88
32-3011 32-3025 2006 FLT
32-3026 2006-FXST
32-3027 2006 FXD
32-3033 2007-09 FXST
32-3034 2007-09 FXD
32-3138 2008 FLT
Power Commander III USB Engine Management Systems 32-3139 2009 FLT
are for fuel injected models and allow for both fuel and ignition
adjustments. Each unit includes a specific map, designed to Dynatek Fusion EFI Ignition Module
improve performance over stock. The Power Commander VT No. Years Model
includes IBM compatible link cable and software package 32-1166 2002-06 FLT
which allows you to fully map the fuel ignition curves on IBM 32-1167 2007 FLT
32-1168 2008-13 FLT
compatible computers. If a computer is not available, the fuel 32-1169 2014-16 FLT
curves can be adjusted by using three touch buttons on the 32-1170 2001-06 FLST, FXST
face plate. 32-1171 2007-11 FLST, FXST
VT No. Year Model 32-1174 2012-15 FLST, FXST
VT No. Year Model
32-1175 2004-05 FXD
32-3005 2002-06 V-Rod 32-3012* 2007 FLT 32-1176 2006-11 FXD
32-3008 2004-05 TC-88 32-3013* 2007-08 FXST 32-1177 2012-17 FXD
Dynaglide 32-3014* 2007-17 Dynaglide
32-3011* 2006 TC-88 32-3037 2008 FLT
Dynaglide *Note: Includes O2 eliminators.
32-0719
V-Thunder Products for
Evolution Electronic Fuel
Injected models
VT No. Description Year Accel Self Learning Module helps regain control of fuel inject-
32-0719 Injection OverdriveTM (A) 1997-98 ed bike. Automatic recalibration-optimizing modifications gains
32-0730 Includes VTE 2700P and
expected from performance exhausts, air cleaners and cam-
V-Thunder Fuel Injected Cam 1997-98
shafts. Easy installation-direct plug-in connections to factory
throttle position, crank shaft position and oxygen sensors. Self
32-0178 learning-module seamlessly compensates for changing loads,
weather conditions and altitude.
VT No. Mfg No. Fits
32-1700 SLM01 95-04 Touring*,01-04 Softail*
02-04 Dynaglide* ,02-07 V-Rod
Kit includes one O2 sensor and one O2 sensor bung to be
welded in.
32-7504 32-1702 SLM03 08-11 V-Rod
Advance Unit Kit utilizes factory installed O2 sensors
32-1703 SLM04 06-11 Dynaglide
VT No. Item 07-11 Softail
32-7504 Assembly w/ contact point & condenser 07 Touring
32-0178 Weight, spring and stainless steel shaft & plate Kit utilizes factory installed O2 sensors
32-1704 SLM05 08-09 Touring with “throttle by wire”
337
Daytona Twin Tec
TCFI Gen 6 Fuel Injection Controller for 2008-13 Harley-Da-

vidson® Touring Models with Electronic Control Throttle Control
• Fully programmable plug-in replacement for 73 pin Delphi®
controller with J1850 data bus used on 2008-13 touring models
with electronic throttle control.
• Quickly auto-tune fuel curves for front and rear cylinders on a
dyno or on-road with new WEGO IIID dual channel wide-band
oxygen sensor interface.
Daytona Twin Tec TCFI Gen 4 Auto Tune Fuel Injection • Support for gear indication on accessory speedometers
Controller is fully programmable plug in replacement for the • Powerful Windows software for custom programming and data
36 pin Delphi controller with J1850 data bus. analysis
• Quickly auto-tune fuel curves for front and rear cylinder on a • Extended data logging and diagnostics. Data FLASH memory
dyno or on-road with new WEGO IID dual channel wide band store full 60 minutes of operating data at 10 samples/second
oxygen sensor interface. • Programmable user input for function such as two stage RPM
• Fully programmable plug-in for 36 pin Delphi® controller with limiter, nitrous retard, and shift kill input and output.
J1850 data bus. • Programmable user out put of function such as shaft light,
• Powerful Windows software for custom programming and nitrous activation, and electric shifter
data analysis • Billet aluminum housing with black anodized finish
• Full support J1850 data bus used for communications with • Easy plug-in installation.
turn signal/security module (TSM/TSSM) and instrument clus- VT No. 32-3052
ter
• Support for new 6th gear indicator.
• Extended data logging and diagnostics. DataFLASH memory
stores full 60 minutes of operating data at 10 samples/second.
• Programmable user input and output.
• Billet aluminum housing with black anodized finish
• Easy plug-in installation
• Supports all sensors including theft/security module
Includes TCFI Gen 4 plug-in fuel injection controller with billet
aluminum housing with black finish, dual channel wide band
exhaust gas oxygen sensor interface, two Bosch LSU 4.2
wide band exhaust gas oxygen sensors, and two 18 x 1.5mm
weld nuts for exhaust pipes. Quickly auto-tune fuel curves
for front and rear cylinders on a dyno or on-road. The robust
alpha-N fuel control eliminates problems with long duration/ Twin Tec External Plug In 8 Pin
high overlap camshafts. Windows software provides custom Ignition for 1995-98 Evo Big Twin
programming and data analysis. Its full support for J1850 data features 4 rotary switches used to
bus used for communications with turn signal/security module set the operating modes such as
and instrument cluster. Fits 2001-11 FXST, FLST, FXD, FLT single or dual fire, adjust the timing,
*Note: Not legal for sale or use on pollution controlled vehi- advance and select RPM limit. Two
cles. VT No. 32-7400 diagnostic LED’s indicate status and
start of the VOES switch. The status
LED is also used for static timing as
it will flash when the engine reaches
TBW System top dead center.
Note: CAN bus system VT No. 32-1007
For Harley-Davidson models, pre-2011, 2012 use analog sig-
nal, 2012-up using digital signal. CAN bus system is based
on the digital signal. Analog signal runs by wire, so each com-
mands need wire to connect. For digital signals, each com-
mand goes to ECM, and ECM gives the proper reaction. This
is the basic idea, the real situation is more complicated.
338
Daytona Twin Tec
Ignition Controller
BIG TWIN
Twin Tec TCFI Fuel Injection Kit for 2001-11 TC-88 with Delphi
Fuel Injection System includes plug in fuel injection controller, 32-3038
PC link, interface cable, Wego wide band exhaust gas oxygen
sensor and weld nut for exhaust pipe. The TCFI solves tuning 32-3049
problems with highly modified engines. Features a fully program-
mable plug in replacement for Delphi Controller which allows Twin Tuner Fuel Injection Controller for 2008-up EFI mod-
programming of advance curves, idle air control including idle els. Features include increased horsepower, improved throttle
RPM and cold start characteristics. The TCFI communicates response, easy plug-in installation and setup; can be used
diagnostic information by blinking codes on the check engine with Dynojet Power Commander Maps and is compatible with
LED. The unit also has built in data logging that stores data for Twin Scan II service tool VT No. 16-0378. The Twin Tuner
the last 15 minutes of operation. Fits all 2001-up. allows you to easily adjust your fuel injection to match the
*Note Oxygen sensor must be installed in rear exhaust pipe. requirements of performance parts. You can add or subtract
VT No. Item fuel by using the mode and up/down push button switches.
32-1004 TCFI2D-Kit VT No. Fits
32-1017* TCFI3D-Kit 32-3038 2008-13 FLT with 73 pin Delphi EFI
*Note: Same features as 32-1016 with the addition of extended 32-3039 2001-11 FXST, FLST, FXD with 36 pin Delphi EFI
data logging and diagnostics. 32-3040 2012-up FXST, FLST, FXD
32-3042 32-3041 2011 FXST
32-3043 32-3046 2001-08 FXST, FLST, FXD w/36 pin
Dephi EFI 50 State Street Legal
ARB E.O. No. D-641
32-3049 2014-16 FLT w/CAN bus
Daytona Twin Tec TCFI Gen 5 Auto Tune Fuel Injection

Controller is fully programmable plug in replacement for the 36
32-3044 32-3050 pin controller with CAN data bus.
• Continuously auto-tunes fuel curves for front and rear cylin-
Twin Tuner II features all the same function as the original Twin ders under actual riding conditions with WEGO IIID dual chan-
Tuner and includes ignition timing control capability. Easily adjust nel wide-band oxygen sensor interface.
the OEM fuel injection controller and ignition to math the require- • Robust alpha-N (throttle position and RPM based fuel control
ments of performance parts. Allows the use of the up and down eliminates problems with long duration/high overlap camshafts.
buttons to make fuel trim adjustment and the valve is displayed • Extended data logging and diagnostics. DataFLASH memory
on LED board also has advanced mode that will allow the tuner stores full 60 minutes of operating data at 10 samples/second.
to make precise adjustment to each cylinder. Requires optional • Powerful Windows software for custom programming and
USB interface cable VT No. 32-3045 compatible with Twin Scan extending data logging and diagnostics.
II Tuning Aid VT No. 16-0378. • The TCFI solves tuning problems with highly modified
VT No. Fits engines. High-end automotive racing application use ALPHA-N
32-3042 2001-2011 FXST, FLST, FXD with 36 pin Delphi (throttle position and RPM based) fuel control. ALPHA-N elimi-
32-3043 2012-up FXST, FLST, FXE with CAN Data Bus. nates any dependence on manifold pressure and if unaffected
32-3044 2008-13 FLT with 73 pin Delphi by long duration/high overlap camshafts. The TCFI bring this
32-3050 2014-up FLT w/ CAN Bus. prove technology to the market places.
32-3045 Optional USB Interface Cable • Idle air control including idle RPM and cold start characteris-
tics are fully programmable. This facilitates the use of aftermar-
ket throttle bodies with higher air flow.
• Includes TCFI Gen 5 fuel injection controller, USB inter-
face for PC link, WEGO IIId dual channel wide-band exhaust
gas oxygen sensor interface, two Bosch LSU 4.2 wide-band
exhaust gas oxygen sensors, and two 18 x 1.5mm weld nuts
for the exhaust pipe.
Fits 2012-up FXST, FLST, 2012-17 FXD.
VT No. 32-7402
339
EFI Components 32-0504 32-0499 32-0497
32-1365 32-1369 32-1374
32-0567
32-0505 32-0506 32-0534

EFI Replacement and High Flow Fuel Injectors. Sold in flow
matched sets of two injectors and includes detailed test report of
injectors performance. *Note: Not legal for sale or use in California or 30-0423
on any pollution controlled vehicles.
VT No. Flow Max HP Max HP Spray Angle (De-
Rating for E10 at for E85 at grees) 32-0536 32-0537 32-0569
(gm/sec 60% Duty 80% Duty 30-0433
at 58 psi) Cycle Cycle
Injectors for 2001-2005 FLT, FXST, FLST, FXD w/Delphi EFI
32-1365 4.5 95 25
32-1366 5.4 115 25 14-0688 30-0434
32-1367 6.2 130 95 25
Fuel Injection Replacement Parts for 1995-up EFI (Electronic
32-1368 7.1 150 110 25
Fuel Injection) systems.
Injectors for 2006-15 FXST, FLST, 2006-07 FLT, 2006-16 FXD (Ex-
cept V-Rod™ and Sportster®)
VT No. OEM Item
32-1369* 3.9 85 25 32-0504 27219-95 Fuel Pressure Regulator 300 KPA
32-1370 5.4 115 25 32-0495 As Above 350 KPA
32-1371 6.2 130 95 25 32-0499 27609-01 Fuel Injector
32-1372 7.1 150 110 25 32-0498 As Above High Flow
32-1373 7.8 165 120 25 32-0497 32424-95 Barometric Pressure Sensor 100 KPA
*Note: Replacement for OE 27709-06A 32-0496 As Above 250 KPA
Injectors for 2008-up FLT, 2016-up FXST, FLST, 2017-up FXD 32-0567 27658-06 Idle Air Control
electronic throttle control models 2006-15 FLST, FXST, 2006-16 FLT
32-1374 5.4 115 18 2006-17 FXD
32-1375 6.2 130 95 18 32-0505 27270-95 Air Temperature Sensor
32-1376 7.1 150 110 18 32-0506 32446-99 Engine Temperature Sensor
32-1377 7.8 165 120 18 32-0534 27629-01 Throttle Position Sensor
32-1161 32-1164 32-1183 32-1184 32-1240 32-0568 27659-06 Throttle Position Sensor
32-0536 31511-01A Relay with Diode
32-0537 32316-99 Map Sensor
32-0569 32315-01 Coolant Temperature Sensor
Position Sensor. 14-0688 — Gasket and Seal Kit
VT No. Fits For 30-0423 66054-06 Oxygen Sensor Plug
32-1161 2000-03 FXD, FLT Crankshaft 30-0434 27719-07 Oxygen Sensor XL
32-1164 2004-05 FXD Crankshaft 30-0433 27683-07 Oxygen Sensor 2007-12 FXD,
32-1183 2008-16 FLT Sensor Map 2007-11 FXST, 2009 FLT
2007-up XL 30-0487 27703-08 Oxygen Sensor 2009-up V-Rod
2016-up FLST, FXST, FXD Sensor Map 30-0431 27729-10 Oxygen Sensor 2010-up FLT Front
32-1184 2006-17 FXD 2006-up FXST, FLST Fuel Injector 30-0489 32700005 Oxygen Sensor 2012-up FXD, FXST,
32-1240 1995-98 FLHT, FLHR Crankshaft FLST Front
35-0586 30-0490 32700006 Oxygen Sensor 2012-up FXD, FXST,
35-0017
FLST Front
30-0432 27809-10 Oxygen Sensor 2010-up FLT rear
42-0953 Chrome Crank Sensor Cover includes
mount screw. 1999-17 FXD, 1999-up FLT.
Fuel Pump Components. VT No. 42-0953
VT No. Fits
Fuel Pressure Regulator Oxygen Sensor Sealing Washer
35-0586 2008-17 FLHT, FLTR, FLHR models, 04-17 FXD, VT No. Year Size
FXDWG, FLD models, 08-17 FXS, FXST, FLS, FLST 15-0081 2006-10 18 mm
models 07-17 XL883-1200 models; 15-0012 2011-up 12 mm
repl. OEM #61015-04A
35-0587 2002-07 FLT, FLHT, FLTR, FLHR models,
01-07 FXST, FLST models, 02-17 V-Rod models;
repl. OEM #27408-01
Regulator Housing
35-0017 2001-07 Softail and 02-07 Touring models;
repl. OEM #62373-01
340
35-6105
35-6104 EFI Components
Chrome Manifold Cover fits 2004-up
BIG TWIN
FXD, 2001-up Softail and 2002-16 FLT
replaces 27483-07.
VT No. Item
34-0100 Kit
15-1527 Gasket
35-6108 Chrome Fuel Fitting for EFI models fits

2003-up FLT, 2002-17 FXST, FLST and
2004-07 FXD.
VT No. 35-0950
Fuel Filters. Intake Flange Set fits elec-

VT No. Fits Item tronic fuel injection models
35-6105 2008-up FXST, FLST, 2004-up FXD Fuel Filter 2007-up.
35-6104 2002-07 FXST, FLST Fuel Filter VT No. 34-1188
35-6108 2000-07 FXST, FLST Line
35-1075 35-1076
15-1536
15-1200 15-1537 15-1297 15-1568

Electronic Fuel Injection Gaskets.
15-1536 29368-99 Induction 1999-01
15-1200 29368-99 Induction 1999-01 (James)
35-1077 15-1537 29463-99 Air Filter 1999-07
35-1078
15-1297 29718-08 As Above James
15-1568 29645-08 Air Filter 2008-17
15-1356
EFI Replacement Fuel Pump Kit for the OEM pump and in-
cludes pump hose and hardware. James Induction Module Gasket and O-Ring Kit fits1999-up
VT No. Fits FXST, FLST, FXD, 1999-16 FLT. VT No. 15-1356
35-1075 1998-99 FLT
35-1076 2000-01 FLT
35-1077 2008-15 FLT
35-1078 2004-17 FXD
2008-17 FXST, FLST, FLST
FLT EFI Fuel Line Kit replaces the
fuel line from the gas tank to the fuel 35-0153 35-0154 35-0155
rail. Fits 2012-16.
VT No. 35-6111
ThunderJet®
Billet Flange Set for use when install- ThunderJet® Electronic Fuel Injection Manifold.
ing larger throttle bodies for electronic VT No. Description
fuel injection. 35-0153 W/ 5.013”-5.016” Long Cylinders fit S&S
VT No. 35-0787 124” Kit and Jims 116” Kit
35-0154 W/4.975-4.980” Long Cylinders fits 117” Kit
Induction Flange Set will adapt 35-0155 With 5.037” Long Cylinders fits 120” Kit
34-0181 to 34-0705 Sifton breather
bracket.
VT No. 34-1523
Magneti Marelli Fuel Injection to
Carburetor Petcock Conversion Fitting Set.
Converts all 1995-01 Big Twins equipped with
Magneti Marelli Fuel Injection System to car-
buretor system. Can be used with any 22mm
petcock. Fits 1995-up FLT models.
VT No. 35-0751
341
Regulator Cover
42-0927 42-0079
42-0781 42-1001 42-0803
Chrome Voltage Regulator Cover features open center grill to

allow for cooling of regulator.
VT No. Fits
42-0927 1989-99 Softail
42-1109
42-0079 2001-09 Softail
42-0685 1991-03 FXD Chrome Ignition Module Cover is a replacement for 1991-up
2046-8 Voltage Regulator Mount Kit. Fits 2000- Dynaglides.
up FXST and FLST. VT No. Year
VT No. 2046-8 42-0781 1991-98
42-0803 1999-03
42-1001 2004-11
42-1109 2004-11
42-1169 2012-17
Chrome Volt Pack Cover bolts on 1987-
2000 Softail models with stock hardware. Chrome Die-Cast Volt Pack Cover fits
VT No. 42-0093 all stock rectifiers. Fits 1970-99.
Engineered to improve cooling for
extended regulator life. Chrome
finish reflects engine and exhaust
heat Grooved to interlock with regulator
Chrome Regulator Covers for mod- 20% more fin area than stock
ule. Fits 1980-99. VT No. 42-0405
VT No. 42-0399
Bracket
31-0784 Regulator Mount FXST Regulator Relocation Mounting Bracket
Brackets attach to allows regulator to be mounted in higher location
engine mount. to allow for increased front fender to frame clear-
VT No. Type ance.
31-0172 Zinc VT No. 31-0725
31-0172
31-0784 Chrome
A Front Engine Mount Blocks

B Alloy Regular Bracket fits TC-88B
act as nuts for front bolts and
models with oval shape regulator.
will mount regulator.
Allows mounting of regulator directly
VT No. Type
below oil filter.
31-0739 A
VT No. 31-0806
31-0635 B
Stainless Regulator Mount bolts to
Chrome Regulator Bracket fits 1980-99 front engine mount on Big Twin mod-
Big Twin. els.
VT No. 31-1261 VT No. 31-0951
31-0951
342
Regulator
BIG TWIN
Chrome 32-0667
32-7562
32-8069
32-7548
32-0780
32-7512 32-0784
32-0781
32-0379
32-0942 32-0381 32-1520

Accel Accel Volt Tech Volt Tech Replace Fits
Black Chrome Black Chrome OEM Charging System Type
32-8067 32-0852 32-0667 32-0780 74516-86 1981-88 FLT-FLHT Classic, 1986-88 FXST-FLST
32-8069 32-0856 32-9098 32-0781 74519-88A 1340 1989-99 FLT, FLHT Carburetor,
1991-98 FXD, 1989-99 FXST, FLST
Volt TechTM and Accel — — 32-9154 — 74505-95A 1340 95-98 FLHT EFI with 38 Amp Alternator Kit
Solid State Regulators 32-0864 32-0865 32-7531 32-0950 74505-97 1997-01 FLHT carburetor, 1999-01 FLHR EFI
• Feature rugged alumi- 32-0860 32-0861 32-7533 32-7538 74518-99A 1999-2003 FXD, FXDWG
num alloy construction. 32-0858 32-0859 32-7534 32-7562 74512-00 2000 FXST, FLST
• Provide more accu- 32-0862 32-0863 32-7561 32-0784 74640-01 2001-06 FXST, FLST
rately regulated voltage — — 32-7548 32-7503 74505-02 2002-2003 FLT
under all electrical loads. — 32-5630 32-7506 32-7501 74631-04 2004-05 FXD
• All units listed carry the — 32-5636 32-7505 32-7502 74505-04 2004-05 FLT
full replacement warranty — 32-5632 32-7507 32-7512 74631-06 2006-07 FXD (45/60 amp)
by Accel or Volt Tech. — — 32-1520 32-0979 74631-08 2008-17 FXD
Accel brand is available — 32-5640 32-0949 32-1107 74505-06 2006-08 FLT (45/60 amp)
in chrome, alloy or black — — 32-1096 32-0966 74505-09 2009-16 FLT
stock finish with polished — 32-5620 — 32-0379 74540-07 2007 FXST, FLST
top fins. Volt Tech comes — 32-0981 — — 74546-07A 2007-up XL
in black or chrome finish. — — — 32-0381 74540-08 2008-2010 FXST, FLST
— — 32-0611 — 74540-11 2011-up FLST
Plug Retainer replaces 45095-85 on all 1970- Chrome Die-Cast Regulator Plug
31-0738
1988 Big Twin. Secures connector plug to alterna- Retainer for 1989-up Big Twin.
tor plug in case, prevents faulty contact. VT No. 31-0738
VT No. 13-0219
343
Alternator Stators replace stock units for models listed in molded (M) or
unmolded (U) type.
VT No. Brand Type
Stator 32-8083
1981-88 Big Twin, Replaces 29965-81, 22 Amp
32-0602 Volt Tech M
32-8081 Volt Tech U
32-9042 Accel U
32-9041 Accel M
1989-99 FXST, FLST; 1989-94 FLT, 1989-94 FXR,
1991-98 Dynaglide, Replaces 29970-88C, 32 Amp
32-8083 V-Twin U 32-0952
32-0602 32-8038 V-Twin U
32-9045 Accel U
32-0464 32-0952 Plug Only
1997-98 FLT, Replaces 29987-97
32-9148 Accel U
1999-01 FLT, FLHR Replaces 29987-99A
32-0463 Volt Tech U
32-9149 Accel U
2002-05 FLT, EFI, Carburetor, Replaces 29987-02
32-8038 32-0872 Volt Tech U (Racing Stator)
32-9350 Accel U
2000 FXST/FLST, 1999-03 Dynaglide, Replaces 29951-99
32-0464 Volt Tech U
32-9145 Accel U
2001-06 FXST/FLST, 2004-06 Dynaglide, Replaces 30017-01
32-0529 Volt Tech U
32-9146 Accel U
32-0529 32-0868
2007 FLST-FXST, 2007 Dynaglide,Replaces 30017-07
32-0868 Volt Tech U
32-0463 32-9147 Accel U
2008-up FXST,Replaces 30017-08
32-0968 Volt Tech U
2006-16 FLT, Replaces 29987-06
32-0948 Volt Tech U
32-9351 Accel U
32-0948
Deutsch Connector Sets

VT No. Fit
32-1855 Regulator (32-0898)
32-1875 Deutsch Connector Assembly 32-1207
Stator Assembly Kit for Big Twins 1970-86 includes (2)

29988-73 locks, (1) 29954-71 retainer, (4) 2653 screws, (2)
2216W screws.
VT No. # OEM Item
32-0598 Kit Complete, all
32-0604 A 29954-71 Nylon Retainer, 10 pack
32-0603 B 2216W Screw, 10 pack
Warranty 37-8812 C 29988-73 Lock Plate, 10 pack
All Electrical Components sold as individual pieces or in kits are covered under our warranty
“Replacement Only” Provision. All electrical related item part numbers begin with a 32 prefix. 37-8811 D 2653 Screw, Fillister, ⁷⁄₈”
No credit will be issued for these items as they are exchange only. 37-9003 D 2712 Screw, with Lock Patch, ⁷⁄₈”
37-9126 2720 Screw, with Lock Patch, 1”
344
32-7796 32-0830
Alternator Rotor
32-0758 32-0759
BIG TWIN
32-1344 32-0951
32-0530 32-0817
Big Twin Alternator Rotor features OE type with magnetic

inserts installed. Volt Tech Big Twin Alternator Rotors feature vibration proof
VT No. OEM Amp Item/Fits construction. Magnets are held in place by stainless steel
32-7796 29957-81B 22/32 Rotor, 1984-2000 FXST-FLST, non-magnetic insert for durability. *Note: Built-in spacer in
1979-94 FLT, 1982-03 FXR, FXD spline area.
32-0830 29981-95 38 1995-05 FLT, 2001-06 FXST, VT No. Year Model Amp
FLST, 2004-05 FXD 32-0758* 1970-00 ST-FX 22/32
32-1344 40356-06B 2006 FXD 32-0759 1970-00 ST-FX 22/32
32-0951 40356-07 50 2007-11 FXD, Rotor 32-0530 1995-05 FLT 38
2007-11 FXST-FLST, 2007-11 FX 2001-06 ST
2007-10 FLT 2004-05 FXD
10-6122 32-0817 2006 only FLT 50
10-2558 10-2550 10-2549
32-0870
32-0870 2012-up FXST-FLST 50
2012-17 FXD
2011-16 FLT
10-6121
2008-up FXCW
32-0899
32-1239 2008-17 FXD
Rotor Shims. 32-8926
10-6121 Special Large Spacer —
10-6122 Special Large/Small Spacer Kit —
32-0899 29923-01A Small Spacer 2001-up
10-2558 29961-85 Small Spacer 1985-90
10-2550 29960-85 Large Spacer 1985-up 1985-90 12-1160
10-2549 29960-91 Small Spacer 1991-up 1991-up
12-1160 603 Alt Roll Pin
32-0746
45 Amp Rotor Only will convert system to 45 amp using stock
stator. The V-Tech rotor features sealed magnets by a stain-
10-0427 10-0428 less insert. Replaces 29999-97. The 1.5” wide rotors fit 1999-
Order Spacer and Shims separately. 05 Big Twins.
VT No. OEM Year Size Item VT No. Type
10-0427 24002-70 1970-98 Spacer 32-8926 V-Twin
10-0428 24032-70 1970-up .060” Shim 32-0746 V-Tech
24033-70 1970-up .090” Shim
Set of 6 24034-70 1970-up .120” Shim
24035-70 1970-up .150” Shim
24036-70 1970-up .180” Shim
24037-70 1970-up .210” Shim
10-2549 Special 1970-up .250” Shim
Big Twin Alternator Rotor
Puller uses the two thread- Engine Shaft Spacer features built in
ed holes in rotor to allow seal flange to give added support for
removal of rotor. alternator rotor.
VT No. 16-0693 VT No. 10-0948
345
Alternator Kit 32-7500
32-0775
32-8927
32-7807
32 Amp “Volt Tech” Alternator Kit fits 1984-78 Big Twins

includes stator, rotor with stainless liner “to seal magnets in 22 Amp Big Twin Alternator Charging System features all
place” chrome regulator and mount kit. *Note: Does not fit FXD components including stator, rotor, black solid state regulator,
models. plug retainer and mount kit.
VT No. Regulator Fits VT No. Regulator Fits
32-0775* 32-0781 1979-88 FLT, 1982-94 FXR 32-7500 32-0667 1984-88 FXST, 1986-88 FLST
1989-99 FXST, FLST, FLT, FXR, FXD 32-7776 32-0667 As Above with Sealed Magnet Rotor
32-7807 32-0781 As Above with reinforced rotor splines
32-8927 32-9098 1989-98 FXST, FLST, FLST, FXR, FXD
32-7775 32-0781 1984-98 FXST, 1989-98 FLST
Alternator Sealing Ring Service

Big Twin Alternator
Rotor Puller uses the
sprocket shaft end to
center and the two
threaded holes in rotor
to allow removal of rotor.For use on
all 1997-06 FLT with 45 amp charging
system. Can also be used on 1997-06
FXST, FLST and FXD that have been
Big Twin Alternator Rotor Puller uses graded to 45 amp charging system.
the two threaded holes in rotor to allow VT No. 16-1054
Motor Shop Alternator Sealing Ring removal of rotor. Jims M-8 Alternator
Replacement Service. Ship in 1970-up left VT No. 16-0693 Rotor Remover and
hand case with damaged O-Ring lip and Installer for M-8
we will machine out and replace with new engines 2017-up. This
steel sealing ring. tool will easily remove
VT No. 60-0164 the high output rotor
Alternator Repair Ring Only. Use on 1971-84 FL, FX, 1979-96 FLT, 1984-94 FXR, without damage to the
VT No. 16-0692 1984-06 FXST, 1986-06 FLST, 1991-06 FXD
magnets.
VT No. 16-1183
346
Charging Systems for Touring
BIG TWIN
32-0764
32-7776
32-8943
32-8944 32-0835
32-0775
32-7775
32-0836
32-0994
Alternator Kit for FLT models include rotor, regulator, stator and hardware. Use 32-8926 rotor only with 32-7780 kit, to produce 45 amp output.
VT No. Regulator Fits Note
32-7776 32-0667 1979-98 Exposed Magnet Rotor
32-7500 32-0667 1979-98 Exposed Magnet Rotor Black Regulator
32-0796 32-0780 1979-98 Sealed Magnet Rotor Chrome Regulator 32-0837
32-8927 32-9098 1979-98 Sealed Magnet Rotor Black Regulator
38 Amp Single Phase Kits 32-0838
32-8943 1991-96 With carburetor sealed magnet rotor
32-7780 32-9154 1995-95 With EFI Exposed Magnet Rotor
45 Amp Single Phase Kits 32-1281 32-1393
32-8744 1991-96 With carb Exposed Magnet Rotor Black Regulator
32-0944 1991-96 With carb Exposed Magnet Rotor Chrome Regulator
32-0975 1997-98 With carb on EFI Sealed Magnet Rotor
32-0871 32-7548 1999-03 With carb on EFI Exposed Magnet Rotor
32-0764 1989-96 With carb on EFI Exposed Magnet Rotor
32-0835 1999-03 With carb on EFI Exposed Magnet Rotor
32-1281 1999-03 With carb on EFI Sealed Magnet Rotor
32-0837 2006 Exposed Magnet Rotor
32-0838 2007-08 Exposed Magnet Rotor 32-0544 32-1391
32-1278 32-0966 2009-10 Chrome Regulator
32-1279 32-0966 2011-13 Sealed Magnet Rotor
32-1391 2011-13 Exposed Magnet
32-1392 2014-16 Air Cooled
32-1393 2014-16 Water Cooled Only
32-0544 2011-16 Water on Air Cooled
32-1472 2011-13
32-1473 2014-16 Air Cooled
32-1474 2014-16 Water Cooled 32-1472
347
Alternator Kit
32-0373
32-0939
32-0388
32-0375
32-0773 32-0839 32-1280 32-0774
32-0378 32-0784 32-7512
Alternator Kit features sealed rotor, stator, regulator and bracket.

32-0840 All feature Deutsch connectors.
1984-88 FXST, 1986-88 FLST, 1984-88 FXR
VT No Repl. Reg Note
32-0776 32-0780 Sealed Magnet Rotor
32-0796 32-0780 Sealed Magnet Rotor
32-0775 32-0781 Sealed Magnet Rotor w/chrome regulator
32-7807 32-0781 Sealed Magnet Rotor w/chrome regulator
32-8927 32-9098 Sealed Magnet Rotor w/black regulator
32-7775 32-0781 Sealed Magnet Rotor w/black regulator
Some basic factoids about 3 Phase...Most of the electric power in the world is 38 Amp Softail 3 Phase
3 Phase. The concept was originally conceived by Nikola Tesla and was proven
that 3 Phase was far superior to single phase power. 3 Phase power is typically
Kit Regulator Year Model
150% more efficient than single phase in the same power range. In a single 32-0375 32-0378 1984-99 FLST-FXST, 1991-98 FXD
phase unit the power falls to zero three times during each cycle in 3 Phase it 32-0373* 32-0784 2001-06 FLST-FXST, 1995-05 FLT
never drops to zero. The power deliver to the load is the same at any instant.
32-0388 32-0378 1999-03 FXD
Also, in 3 Phase the conductors need only be 75% the size of conductors for
single phase for the same power output. Therefore, a 3 Phase system provides 2000 FXST
more current delivery for EFI and other electrical accessories and provides more 32-0939 2006 FXD (Alternator Stator& Rotor)
charging power for increased battery life and easier starting. Not really much 45 Amp, 3 Phase
more complicated than single phase but much more efficient!
32-1475 2001-06 FLST-FXST
32-1478 32-1476 2001-06 FLST-FXST
32-1475
50 Amp, 3 Phase
32-0773 32-7512 2006-07 FXD stock, 2006 FXD upgrade
32-0774 32-0979 2007 FXST, 3 Phase
32-1280 2008-11 FXD, 3 Phase
32-0839 32-0979 2008-10 FXD, 3 Phase
32-0840 32-0381 2008-10 FXST, 3 Phase
32-1477 2012-17 FXD, FXDWG, 3 Phase
32-1478 2012-17 FXD, FXDWG
*Note: For 1995-2005 FLT models, use with 31-0166 zinc rectifier
348 regulator bracket mount.
Starter Motor
1989-up Big Twin
BIG TWIN
32-0998
32-0248
32-0242 32-0243
32-9266
Stock Starter Motors and Parts for all 1989-06 Big Twin
except 2006-17 Dynaglide models. Chrome Starter Motor is fully chrome plated including the alumi-
VT No. OEM Fits Item Finish num parts. For all 1989-05 Big Twins except 2006-17 Dynaglide
32-0242 1989-93 Motor Black models. 32-0998 includes remote starter button.
32-0243* 1989-06 Motor Chrome VT No. Kw
32-9266 31604-91 1991-up Solenoid Repair Kit 32-0998 2.4
*Note: Provides 15% greater torque over stock starter motor. 32-0248 1.4
12-9996 12-9995 32-9266 Solenoid Repair Kit for 1991-up Big
Twin.
VT No. Fits
Big Twin Starter Motor Replacement Bearings. 32-9266 1991-05 FXD,
VT No. OEM Fits 1991-06 FXST, FLST, FLT
12-9996 8883 1991-up Commutator End 32-9345 2006-17 FXD,
12-9995 8871 1991-up Gear End 32-1427 2007-17 FXST, FLST, FLT
32-1427 1989-06 Big Twin
Remote Starter Button
replaces end cover on 1991-
06 Big Twin. Allows starter to
operate directly at the solenoid. Start Boost Relay provides full battery voltage to
VT No. Item coil during cranking, eliminating the 1-2 volt drop
32-0742 Chrome through the wiring harness in single fire applica-
32-1195 Black tions.
VT No. 32-3000
42-1168
32-0742
installed on
32-5115 32-0742
42-1167
Starter Motor End Cover

Dresses the end of the starter motor for a clean look on all
2017-up FLT models. Available in chrome or gloss black.
Black Chrome
42-1167 42-1168
32-1195
Cover
Starter Motor Chrome Chrome Starter Solenoid Plate replaces
End Cover for 1991- 31688-90, 1990-17 FXD, 1991-17 FXST
06 Big Twin. and FLST.
VT No. 42-0992 VT No. 32-7798
Chrome Starter
Cover fits 1991-05
FXD and 1991-94
FXR. VT No. 42-0152
349
Starter Motor
32-1150 32-1151 32-1152 32-5115
32-0765
32-5118 32-1153
32-5116 32-5117
High Torque Starter Motors by Volt Tech are available in back
or polished/chrome finish and in either 1.4 kw field wound or 1.7
kw permanent magnet types. Stock starter motor is 1.2 kw field
wound type. Polished/chrome units have all aluminum parts pol-
ished and all steel parts are chrome plated. Black units are black
powder coated.
VT No. Finish KW 32-1238
1989-93
32-1150 Black 1.4
32-1151 Chrome 1.4 32-0999 32-1000
32-1152 Chrome 1.8
1994-06 FXST, FLST, FLT; 1994-05 FXD
32-5115 Black 1.4
32-5116 Polish/Chrome 1.4
32-5117 Black 1.7
32-5118 Polish/Chrome 1.7
32-1153 Chrome 1.8
2006-17 Dynaglide, 2007-17 Softail, 2007-16 FLT
32-0765 Chrome, OE 1.4 Starter Drive Gear Set includes
32-1238 Black, All Balls 1.4 9T pinion gear and 66T or 84T ring
32-0999 Black, Volt Tech 1.4 gear with mounting hardware. This
32-1000 Chrome, Volt Tech 1.4 ratio allows more RPM for easier
starting and the heavier teeth con-
figuration is less susceptible to wear
by converting the 102 tooth ring
2.4 KW Starter Kit
gear to 66 or 84T.
includes chrome
starter and full jack
shaft kit to fit 1989- 66T 9T 84T 9T Year
32-9202 Replacement Replacement
06 models except — — 18-0335 18-0445 1990-93 All
2006-17 Dynaglide. Big Twin
VT No. 32-9202 — 32-9201 18-0365 18-0446* 1994-97 All
Big Twin
18-0361 32-9201 18-0366 18-0446* 1998-05
Dynaglide
2006
Softail/FLT
Hardware
37-0018 — Replacement Bolts for Above
*Note: 10 Tooth
350
18-1221
Starter Shaft
1989-up
BIG TWIN
32-9201
Easy Starter Kits for Big Twin models improves starting on high
compression big inch engines through an improved starter-to-
clutch basket gear ratio. Complete kits include a clutch basket
with bearing for Big Twin models with 66-tooth starter ring and a
9-tooth starter pinion gear.
VT No. Year
18-1220 1994-97
18-1221 1998-06
32-9201 9T Gear
Ring Gears
Big Twin Starter Ring Gears for
replacement on stock clutch drums
only bolt on type. Note: Bolt on types
include screws.
VT No. Year Teeth
18-8307 1991-93 66T 32-9238
32-9271
18-8308 1994-97 102T
18-8319 18-8319 1998-06 102T
37-0018 Bolt Set
1989-up Big Twin Starter Coupler and Related Parts
VT No. OEM # Item
37-9243 4325 A 1989-93 Bolt
37-9244 4358 A 1994-up Bolt
12-0981 11182 B 1989-up Retaining Ring
12-0978 11183 C 1989-93 Retaining Ring
12-0985 11248 C 1994-up Retaining Ring
12-0216 11220 D 1989 Key
14-0920 12053A E 1989-up Seal
32-9270 31342-93 F 1993 Pinion Gear
Inner Primary Hardware fits Big Twin 5 Speed 1989-up FXST- 32-9271 31342-94 F 1994-up Pinion Gear
FLST. 32-9227 31430-90 G 1993 Thrust Washer
VT No. # OEM Item 32-9273 31430-94 G 1994-up Thrust Washer
12-0357 A 9135 Bearing 32-9238 As Above 1989-93 Shaft and Gear Kit, Sifton
14-0159 B 12052 Seal, 1985-up, 5pack 32-9228 31548-90 H 1990-up Coupling
12-0969 C 60678-85 Retaining Ring 32-9275 33120-89 I 1989 Shaft
10-8527 F 33445-89 Starter Shaft Inner Bushing, 1989-93 32-9277 33127-93 I 1993 Shaft
10-8548 F 33445-94 Starter Shaft Inner Bushing, 1994-up 32-9278 33127-94 I 1994-up Shaft
14-0920 E 12053A Seals, 1989-93, 5 pack 17-0930 33125-89 K 1989 Lock Plate
14-0961 E 12066 Seal 1994-up 32-9229 33126-90 K 1990-92 Lock Plate
12-1198 H 221 Pin, Dowel 32-9280 33126-93 K 1993 Lock Plate
10-8528 G 33446-89 Starter Shaft Outer Bushing 32-9281 33126-94 K 1994-up Lock Plate
10-8549 G 33446-93 Starter Shaft Outer Bushing, 1994-up 14-0569 33345-89 L 1989 O-Ring
12-1253 H — Transmission Dowel Pin 14-0960 33340-90 L 1990-91 O-Ring
12-0589 12-0591 15-0779 13-9203 33447-89 M 1989 Spring Pinion Gear
13-9221 33449-90 M 1990-93 Spring Pinion Gear
13-9255 33449-94 M 1994-up Spring Pinion Gear
17-9162 60647-90 N 1990-93 Coupling
17-9164 60647-94 N 1994-up Coupling
Inner Primary Bearing Kit for Late 1985-up Big Twins includes
bearing, seal, two snap rings and one inner race. 32-1185
32-1186
1985-93 1994-05
12-0589 12-0591
Kits with gaskets. Solo Starter Jackshaft Starter Repair Kit includes thrust wash-
15-0779 1994-06 er, lock plate, spring, screw and retaining rings.
15-0781 1986-89 15-0781 15-0782 VT No. Fits
15-0782 1990-93 32-1185 1994-2006 FLT, FLST, FXST, 1994-99 FXR, 94-99 FXR
32-1186 1989-93 FLT, FLST, FXST, FXR, FXD
351
Starter Drive
32-0638
32-0962
32-0639 32-2506
32-0963 32-1561
32-9031 32-9122
32-0943
32-0961
Starter Drive for Big Twin features high strength five roller
clutch, stainless steel springs, hardened ramped clutch receiv-
ers, premium internal bronze bushing and factory pre-lubing.
VT No. Item Fits Brand
32-0638 31443-65A 1965-88 Accel Heavy Duty
Starter Clutch Drive Kits for Big Twin include clutch drive, 32-0639 31443-65A 1965-88 Volt Tech
O-ring, lock tab, seals, spring and cable boot. 32-2506 31443-65A 1965-88 Volt Tech Heavy Duty
32-1561* 31544-90 1989-90 V-Twin
VT No. Year 32-9031* 31663-90 1991-up V-Twin
32-0962 1991-92 32-9122* 31663-90 1991-06
32-0963 1993 32-0943 2007-up
32-0961 1994-17 FXD, 1994-up FXST, FLST, FLT *Note: Drive Assemblies
Inner Primary Cover Bearing and Seal Remover
Starter Shaft Kit
Installer Tool safely removes and installs inner primary
includes parts bearing (OEM# 9135) without damage to the new bear-
shown, drive including by pushing on the outer perimeter of the bearing.
ed. Fits 1994-up Removes and installs inner primary and seal that the
FXST. transmission mainshaft passes through (OEM#12052A).
VT No. 32-9203 For L1984-06 FXST/FLST; 85-up FLT/FLHT/FXR/FXD/
FXDWG. VT No. 16-1027
Starter Shaft Starter Shafts and Spacers.

VT No. OEM Fits
17-9944 33120-85 1986-88 FLT-FXR
32-9238
17-9939 31482-86 1986-89 FXST
17-9985 31311-80 Spacer, FLT
17-0085 17-9984 33121-79 Spacer, FLT
17-0081 31493-67 Nut, FLT
12-0569 31312-80 Nut, FLH Classic
32-9288 12-0589
12-0591 17-0871
16-1297
32-9200
Starter Shaft Kit includes parts pictured for Big Twins.

VT No. Type Year 17-0873 17-0870
32-9238 V-Twin 1989-93
Inner Primary Bearing Kit for Late 1985-up Big Twins
32-9288 Kit 1989-93
includes bearing, seal, two snap rings and one inner race.
32-9200 Kit 1994-17 FXD, 1994-up FXST, FLST, FLT
1985-93 1994-05 2006-07 2008-up
16-1297 Tool Wrench
12-0589 12-0591 17-0871 17-0873
352 17-0870 1985-05 Bearing/Sleeve
28-0117 42-0089
Solenoid
Starter Solenoid replaces
BIG TWIN
32-0633
71469-65 used on 1984-88
FXST models.
42-0025 VT No. Finish Brand
32-0699 Zinc V-Twin
32-7798 42-0400 32-0633 Zinc Accel
32-1063 Black Accel
32-0632 Chrome Accel
32-1021 Chrome V-Twin
42-9928 5-Speed Starter Solenoid replaces

31489-79. Fits 1979-88 FLT’s and
1982-88 FXR’s. Note: 1984-88 5-Speed
FXST use 4-Speed style solenoid.
VT No. Finish Brand
28-2019
32-0636 Zinc Accel
Chrome Solenoid Body Cover. 32-1062 Black Accel
VT No. Years/Models 32-0637 Chrome Accel
28-0117 1965-88 Big Twin, Black 32-0986 Zinc VT
32-0637 32-1055 Chrome VT
28-2019 1965-88 Big Twin, Grey
42-0089 1986-88 FXST-FLST 5-Speed Starter Solenoid Kit
32-0698
42-9928 1980-88 FLT-FLHT-FXR 5-Speed fits 1984-88 FXST
42-0400 1965-88 FL-FXE-FXR-FLT End Cover models. Kit includes
32-7798 1991-up Big Twin End Cover chrome or zinc sole-
42-0025 1979-88 5 Speed FXR-FLT noid, outer and inner
32-0642 32-9076 32-0737 rubber boot, foam gas-
ket, bolts and spacer.
VT No. Finish
32-0697 Zinc
32-0698 Chrome
32-0738
Starter Relay. D
VT No. OEM Fits
32-0642 31506-79 1980-90 All 32-7571 Complete Kit
32-0738 — As Above with Weather Proof Skirt J H C
32-9076 31504-91A 1991-06 All FLT, 1991-99 FXD, FXST
32-0737 31522-00 2000-10 Softail, 2000-10 FXD
I G
32-1160 31586-07 2007-16 FLT
Start Boost Relay will boost voltage drop to
allow full battery voltage to the module and coil E
during cranking for single fire ignition applications. A B
F
32-3200 VT No. 32-3000
Solenoid Plunger Hardware fits 1965-88 solenoids.
32-8042 VT No. # OEM Item
32-8036 32-7571 Kit All Listed
12-1176 A 257 Roll Pins
12-1177 F 600 Roll Pins
32-8041 12-1178 E 601 Roll Pins
Starter Relay Connector. 12-1180 E 614 Roll Pins
VT No. Fits 32-0590 G 31435-65A Plunger
32-8036 1979-90 All Twins 13-0118 H 31438-65A Over-Run Spring
32-8041 1973-78 All Twins when using 32-0591 B 31439-65 Retainer, 1965-84
1979-90 type starter relay, 4-lug 17-9157 31439-84 Retainer, 1985-90
32-8042 As Above, 5-lug 13-0119 C 31440-65 Return Spring
Note: 32-8036 includes crimp style connector ends and 28-1997 D 31441-65A Plunger Boot
32-8041 and 32-8042 includes pigtail harness. 32-0318 J 31452-65 Spacer, each
15-0181 I 60645-65 Gasket
Solenoid Rebuild Kit. Complete over-
haul for 71469-65 and 31489-70 sole-
noids, stock and aftermarket.
VT No. 32-0634
353
Hitachi Type Starter Motor
32-5123 32-5122 Hitachi Type High
1.4 kw Torque Starter Motor fea-
32-0059
32-7761 tures 1.4 kw design that
32-0308
generates more power
1.4 kw and shaft speed than origi-
32-0306 nal type .8 kw starter.
32-1634 32-5122 Black
32-5123 Chrome
Hitachi Type Starter Motors are replicas for 1974-88 FXE, 32-1634 Black, Note: 6”
1982-84 FL, 1983-88 FXR-FLT and 1984-88 FXST. Parts inter- 32-1569 Brush Holder
change with original, 5” overall body length.
VT No. OEM Item
32-1307 31570-73 Complete, Black 32-0553 Hitachi Starter Hardware Kit includes
32-7760 31570-73 Complete, Black brushes, holder, springs, through bolts and
32-7761 31570-73 Complete, Chrome insulator commutator end bushing for 1973-
32-0306 31580-73 Armature 88 Big Twin.
32-0307 31582-73 Brush Set VT No. 32-0553
32-0308 31579-73 Field Coils
32-0059 31576-73 Thru Bolts Springs for Hitachi Starter Motors. Replace 31600-
12-0347 31583-73 Bearing, Drive End
90. 1991-17 starter clutch assembly. VT No. 13-9220
Starter Motor Housing, Shafts and Gears

1984-85 FXST 1984-88 FLT, 84-88 FXR, 1986-88 FXST
43-9160
17-0509
43-9161
Starter Related Hardware. 17-0240

VT No. OEM # Item
12-0317 9062 A 1984-85 Housing Needle Bearing Housing
12-0318 9063 B Needle Bearing Cover
12-0934 11039 C 1984-88 Retaining Ring Collar Starter Related Hardware. Kits includes A, B, C, D, E, F, G,
17-0088 11041 D 1984-85 Starter Shaft Spacer H, I, J, K, L, and M.
14-0501 11101 E 1984-85 O-Ring Deflector Plate VT No. OEM Item
32-0639 31443-65A F 1984-88 Starter Drive Gear 43-9161 Kit FXST 1986-88
17-1507 31445-65 G 1984-E85 Shift Lever Starter Gear 43-9166* Kit FXST 1985-88
17-1506 31478-65A H 1984-85 Pivot Bolt Shifter Lever 17-0240* Kit FXR 1984-88
17-0085 31482-70 I 1984-85 Starter Shaft 12-0317 9062 A Needle Bearing Housing
17-1508 31485-65 J 1984-85 Starter Shaft Gear 12-0318 9063 B Needle Bearing Cover
17-0081 31485-65 K 1984-85 Starter Shaft Nut 12-0934 11039 C Retaining Ring, Collar
17-1504 31502-65 L 1984-88 Thrust Washer Chain Cover 32-0638 31443-65A E Bendix Drive
17-1505 31503-70 M 1984-85 Shifter Collar 17-1508 31485-65 F Gear 1980-85
17-1502 31503-65 M 1965-69 Shifter Collar 17-9938 31340-80 F Gear 1985-88
17-0084 31530-65A N 1984-85 Starter Shaft Nut and Spacer 17-0965 31491-79 G Shift Lever, FLT, Steel
17-9936 31531-69 O 1984-85 Starter Shaft Spacer 17-9773 31300-84 G Shift Lever, Starter FXST
43-9122 31572-79 P 1984-85 Housing 17-0081 31493-67 H Nut for Shaft
17-0509 60516-65A Q 1984-85 Deflector Plate 17-9987 31495-79 I Pivot Pin FLT-FXR
s15-1064 60559-80 R 1984-85 Plate Gasket 17-9875 31473-86 I Pivot Pin FXST
17-9990 17-9995 17-9988 FLT/FXR Starter Housings. 17-9990 31497-83 J Housing, L1983-85 FLT/FXR
Order bearing separately. 17-9995 31572-86 J Housing, 1986-88 FLT/FXR
VT No. Year 17-1504 31502-65 K Thrust Washer
17-9990 1983-85 17-1502 31503-65 L Shift Collar
17-9995 1986-88 17-9983 33120-79 M Starter Shaft, 1980-84 FLT-FXR
17-9944 33120-85 M Starter Shaft, 1985-88 FLT-FXR
17-9988 1980 only
17-9939 31482-86 M Starter Shaft, FXST
17-9984 33121-79 O Spacer, Shaft, FLT-FXR
17-9985 31311-80 O Spacer FXST
*Note: Order appropriate housing to complete assembly.
354
Circuit Breaker Ignition Switch
32-0414
BIG TWIN
32-0415
A 32-0412
B
32-8921 32-0458
C
F 32-8922
32-0478
37-9069
D 31-9952
32-0436
32-0479
H
Universal Key Switch includes mounting ring and two keys.

VT No. Type
32-0415 On-Off-On
32-0478 Off-On-Start
32-0479 Off-On-On
Circuit Breaker are stock replacements. 32-8065

VT No. # OEM Amp Fits
32-0414 A 74589-73 15 1973-up FL, FX
32-1537 74589-73 15 10 pack
32-0413 A 74559-77 30 1978-up FL, FX 32-8114
32-1536 74559-77 30 10 pack
32-0412 B 74594-71 20 1970-up Big Twin
32-0458 B 74586-30 30 1970-up Big Twin
32-0436 H 74587-94 15 1994-96 FL, FX
32-9207 A 74600-94 50 1994-up FL, FX 32-8111 32-1556
32-0460 A 74600-97A 40 1999-up FLT
32-8921 C 74598-73 Connector Bar, each
32-8922 69999-77 Connector Bar, each
32-8945 ⁷⁄₈” C/C Connector Bar, pair
37-9069 D 7602 Nylon Nut, ¹⁰⁄₃₂”, 25 pack Ignition Switch.
12-0581 E 7629 Nut, 25 pack VT No. Type
31-9952 F 9952 Mount Clip, 10 pack secures 32-8065 Mini
breaker or flasher to fender 32-8114 Universal Ignition Switch
31-9964 G 8672 Rivet for Above 32-8111 On-Off Mini
32-1556 On-Off Mini Chicago Lock Keys
42-0525 Chrome Switch Bracket.
VT No. Years Type
31-0493 31-0490 42-0525 1982-90 FXR
Circuit Breaker Bracket available for two or three circuit 31-0262 — Universal
breakers, allows standard 15 or 30 amp breakers to snap firmly
31-0262
in place. Bracket has ¹⁄₄” holes, 5” apart and can be mounted to
oil tank bracket or fender. Chrome Weld On Switch Mount Collar accepts
VT No. Breakers 32-0161 switch.
31-0493 2 VT No. 32-0820
31-0490 3
Circuit Breaker Mount Rubbers hold breaker in place on
FXST-FLST models. Replaces 70939-84A, 5 pack.
VT No. 28-0403
Terminal Boards
32-0502 Terminal Blocks with terminal
studs. 10-24 thread.
VT No. Terminal
32-0880 32-0502 4
32-0880 8
32-0879 12
32-0878 32-0878 16
355
Ignition Switch 32-0419 32-8078
32-9053
Barrel
32-0482
32-9038
Barrel Key Ignition Switch features round style keys, featuring

2-position activation with positive detent to retain key in the off
position.
VT No. OEM Year Model 32-0480
32-9038 71428-90A, Stock 1991-05 FXD
6 Post FLH Cast Ignition Switches include cast cover and two
32-9053* Early Type 1977-93 FX
keys. Replaces 71501-73, for 1985-95. Cover installed as noted.
*Note: Features run position with lights off
VT No. Brand Top Key
32-1099 32-0419 V-Twin Cast Stock
32-8078 Replica Cast Stock
32-0480 Contact Cast Round
32-0161 32-0482 Rear Hinge Cast Round
Hardware
32-1100 37-8916 2589 Terminal wire screw and washer, 24 pack
37-8917 2625 Mount screw, 7015 washer, 24 pack
Key Switch Spacers allow switch height to be
32-0175 adjusted when installing dash cover on FL type
dash assemblies. Spacers are .040” thick.
Chrome Stock Key Switch for ignition and light switch for VT No. 39-0118
Super Glide, replaces 71425-77 and 70124-75. Used on all
FX-FXS, 1982-93 all FXR. Includes two keys and mounting Switch Covers fit 1967-up FLH diecast
ring. dash switch, chrome finish.
VT No. Type Year VT No. 32-0399
32-0161 Replica 1977-93
32-0416 Stock Type 1977-93
32-1099 As Above Cam Lock
32-0175 Replica 1973-76 Diagnostic Wiring
32-1100 As Above Cam Lock
32-1267 Off/On Start Wire Plus Anodized Billet Lid for
Mid Frame Mounted Wiring Kit for
32-8070 32-9267 FX-FL-FXST models. Optional anod-
ized billet lid sold separately.
VT No. 32-4151
Wire Plus Digital Instrument Panel features chrome billet

construction, digital speedometer, digital bar graph tachometer,
charging system monitor, trip meter, odometer and light sensor
for auto dimming at night. Requires a digital signal from the
39-0050
transmission sensor and an ignition module with a tach output.
32-8109 Requires correct bracket for handlebar mounting.
VT No. Item
Chrome Electronic Ignition Switch for 1985-95 Softail mod-
39-0050 Clamps for 1” Bar
els has smooth action and dependability of electronic switch- 39-0051 Clamps for 1¹⁄₄” Bar
ing. It eliminates original pole to bar contacts found in original 39-0052 Clamps for 1¹⁄₂” Bar
equipment switch. This 6 pole switch withstands vibration and
corrosion and it replaces 71501-73. Includes two keys and early
chrome style switch cover. VT No. 32-9267 features stainless
internal construction.
VT No. Feature
32-8070 Smooth
32-9267 Stainless
32-8109 Silent
356
32-0480 32-1192 Ignition Switch
for Fat Bob
BIG TWIN
32-0439 32-1197
32-8109
32-1198 32-0987
32-1199
32-0482
32-0241 32-1084 32-1088
32-1194
32-9267 32-1193
Side Hinge 3 Pole Electronic Ignition Switch with round keys

Smooth Skull Fits
32-0439 32-1197 1993-02 FWDWG, 1996-02 FXST, FLST, 1994-02 FLHR
32-0241 32-1198 2003-08 FXDWG, 2003-10 FXST, FLST 2003-13 FLHR
— 32-0987 As Above with Fan Shaped Key
Chrome 6 Post Mechanical Ignition Switch with flat keys. 32-1699 — As Above, Includes Neck Lock Keyed the same as switch
Smooth Skul Fits Side Hinge 3 Pole Electronic Ignition Switch with round keys
32-0480 32-1192 1973-84 FLH, 1984-95 FXST, 1986-95 FLST, 1980-84 FXWG Smooth Skull Fits
32-8109 32-1199 1973-84 FL, 1984-95 FXST, FXWG 32-1084 — 2011-up FXST, FLST
Chrome Electronic 6 Post Ignition Switch with round keys. 32-1088 — 2011-up FXST, FLST Neck Lock Keyed the same as switch
Smooth Skull
32-0482 32-1194 1973-84 FLH, 1984-95 FXST, 1986-95 FLST, 1980-84 FXWG
Stainless Steel Electronic 6 Post Ignition Switch with flat keys.
32-9267 32-1193 1973-84 FLH, 1984-95 FXST, 1986-95 FLST, 1980-84 FXWG
32-1693 32-1694
32-1691 32-1692
32-1689
32-1695 32-1696
32-1698
32-1690
Gloss Black Ignition Switch
VT No. Key Terminal Type Fits
32-1691 Flat 5 Post Mechanical 1936-72 FL 32-1697
32-1692 Round 5 Post Mechanical 1947-72 FL
32-1693 Flat 6 Post Mechanical 1973-84 FL, 1984-95 FXST,
1986-95 FLST
32-1694 Round 6 Post Mechanic 1986-95 FLST
32-1695 Flat 6 Post Electronic 1984-95 FXST, 1986-95 FLST
32-1696 Round 6 Post Electronic 1986-95 FXST
32-1689 Round 3 Pole Electronic 1996-13 FXST, FLST 32-144132-1441 32-1442
32-1442
32-1362 Round 3 Pole Electronic 2003-13 FXDWG, FLHR Skull Ignition Switch
32-1690 Round 3 Pole Electronic As Above but includes neck Chrome Black Fits
lock keyed the same as switch 32-1439 32-1440 2011-2017 FLST, FLSTF
32-1697 Round 3 Pole Electronic 2011-up FXST, FLST 2014-2018 FLHR, FLHRC
32-1698 Round 3 Pole Electronic As Above but includes neck
2012-2017 FLD, FXDF, FXDWG, FXDB
lock keyed the same as switch
32-1441 32-1442 1996-2010 FXST, 1996-2011 FXDWG,
1995-2013 FLHR
357
Switch Flasher
32-0457 33-0399 33-2198 33-2173
32-1396 33-0398 33-0938

Flashers for turn indicator lights on 74” 6 or 12 volt.
VT No. OEM Item U/M
33-0399 68543-64A 12 volt, Round Each
32-0429 33-0848 12 volt, Round 10 pk
32-0818 33-0916 68543-64C 12 volt, Round Solid State Each
33-0848
Oil Pressure Switches are precision calibrated. 33-2198 As Above Rectangle, Replica Each
VT No. OEM Fits 33-2173 As Above Rectangle, Plastic Each
32-0429 26561-84 1984-99 FXST, FLST, 1991-98 FXD, 33-0938 LED Type Each
1984-85 FLT 33-0398 68543-61A 6 volt Each
32-0457 26561-99 2000-17 FXST, FLST, 1999-17 FXD, Flasher for hazard or four flashing lights. 33-0397
1999-16 FLHR 33-0397 68541-64 12 volt
32-1396 74438-99A 1999-16 FLHTC, FLHX, FLHTK, FLTRU, 12 Volt 2 Pin Flasher Units with built in bulb failure indicator.
FLTRX 33-2350 10 Watts
32-0818 Wire 33-2351 21-23 Watts
Crank Sensor fits 2001-up FXST,
FLST, 2004-16 FLT, 2006-17 FXD, Flasher Connector and Mount.
2006-up XL. VT No. 32-8925
VT No. 32-0988
B C
Hi-Low Beam Switch Relay will allow the Hi-Low

beam to be switched from one beam to another
A using one wire momentary horn type button.
VT No. 32-0448
Neutral Switches are replica type, replaces the following FLH-
FX models.
VT No. # OEM Year Speed Oil Pressure Switch Wrench
32-0417 A 33900-59 Late1973-Early79 4 installs and removes oil pres-
1979-98 5 sure switches without dam-
32-9065 A As Above Replica 5
aging the switch itself. Used
32-0069 B 33902-98 1998-99 Big Twin 5
32-0522 B 33904-00 2000-05 Big Twin 5 on 1340cc Evolution, and late
32-0955 C 33926-06A 2005-17 FXD, 2007-up FXST 6 1983-84 Sportster. Replaces
32-1090 1999-up XL 5 34816.
VT No. 16-0990
16-9723 16-9724
Oil Pressure Gauge and Indicator Lamp Sending Unit

32-0770
32-1629 32-0443 Wrenches. These reversible ratcheting wrenches are used to
install and remove oil pressure indicator lamp or gauge sending
Hydraulic Brake Flag Switch features heavy duty contacts unit on all 1984-up Big Twin.
and quality brass terminals. VT No. Item Year
VT No. Fits 16-9723 Sending Unit 1999-up
32-0443 1948-03 FLT, FXST, 1986-03 FLST, 1991-03 FXD 16-9724 Sending Unit 1984-98
32-0770 2004-up FLT, FXST, FLST, 2004-07 FXD
32-1629 2008-17 FXD 32-9083
42-0675 Chrome Oil Pressure Vacuum Switch Assembly

Cover fits 1984-99 Big Twin VT No. OEM Fits
with 32-0429 sending unit. 32-9079 26557-83 1984-90 All FXR
VT No. 42-0675 32-9080 26558-84 1984-90 FXST 1986-89 All FLT
32-9083 26566-91 1991-95 All FXST-FLST,
Dynaglide and FXR
358
Button Switches
Direct Starter
BIG TWIN
Button fits 7/8” 32-0263 32-0264
hole.
VT No. Button
32-1025
32-1025
32-8115 32-8115 Red
20 Amp Toggle Switch features red cap closure.
VT No. 32-0188
32-1378 32-1360
32-0867
32-0869
Mini Chrome Push Button Switch for starter. Two wire type
requires a starter relay.
VT No. Wire 32-1380 32-1364
32-0867 2 Custom Handlebar Switch Kits feature a CNC cut billet housing that
32-0869 1 are available in duet or old school styles. Kit includes stainless steel
Hi-Low Beam Switch Relay will allow the Hi-Low all weather mini switches, colored wiring and mounting hardware.
beam to be switched from one beam to another Available in black, chrome or copper plated finishes. Duet style has a
using one wire momentary horn type button. more modern square style shaped housing and old school style has a
rounded shape hosing like old style original horn switch.
VT No. 32-0448
Duet Style
Bat Handle Toggle Switch Set comes VT No. # of Switches Finish
in a set of 4 featuring a black finish. 32-0263 2 Chrome
VT No. 32-1812 32-0264 2 Black
Old School Style
32-1378 1 Chrome
32-1360 1 Black
32-1379 1 Copper
32-1380 2 Chrome
32-1364 2 Black
32-1381 2 Copper
55 Gallon Oilzum Design Can measures 70” x 33”. Note:

This item is only available for pick up at our NY warehouse.
VT No. 48-1836
359
Wire Harness/Dash Base Assembly
Note: Order the appropriate factory service manual to facilitate wire harness installation.
39-0968 39-0191
FXST Builders Harness/Dash Base Assembly. Builder

Harness includes all correct color coded high tension wires,
handlebar wires and tail lamp wires for years listed. Dash base
assembly includes wired base, six post switch, circuit breakers 39-0194 Wiring Harness/
and flashers. Allows use of either the turn signal canceler VT
Dash Base
No. 32-7508 (not included) or flasher VT No. 33-0399.
VT No. Item Year Assemblies include
39-0968 Dash Base Assembly 1987-95 complete harness
32-0675 Builder Harness 1987-88 pre-wired to dash
32-0456 Builder Harness 1989-90 base, 6 post key
32-0726 Builder Harness 1991-95 switch, terminal box,
1984-up Wiring Kits headlamp connec-
feature plastic wire tion, speedo lamp
in original factory socket and front
color codes with all terminal board when required. VT No. 39-0193 uses 39-0399
terminals applied in flasher included; 39-0191 requires use of 32-7508 turn signal
vinyl loom. Complete canceler available separately. 1987-95 assemblies require pur-
“Builder’s Kits” include chase of handlebar switch wiring with six switches.
handlebar, taillight, VT No. Type Year/Model
coil and regulator Big Twin Electric Start Models
wires, denoted by an 39-0193 5-Light 1987-88 FXST-FLST
*. All other harness- 39-0194 5-Light 1989-90 FXST-FLST
es are main harness only. Handlebar and tail lamp must be
39-0191 5-Light 1991-95 FXST-FLST
purchased separately for these kits. Main harness include the
main turn signal wires. Builder’s Wire Harness
VT No. OEM Application Kits for Softail models,
FXST-FLST-FXR include main harness, han-
32-9213 70216-87A 1987-88 FXST dlebar, ignition switch and
32-9214 70216-89 1989-90 FXST tail lamp wires with all nec-
32-9215 70216-91A 1991-92 FXST essary junctions and fittings.
32-9216 70216-93B 1993-95 FXST-FLST VT No. Year
32-0675* Builder’s Kit 1987-88 FXST-FLST 32-0726 32-0675 1987-88
32-0456* Builder’s Kit 1989-90 FXST-FLST
32-0456 1989-90
32-0726* Builder’s Kit 1991-95 FXST-FLST
32-0674 — 1989-95 Ignition Switch Harness 32-0726 1991-95
32-0753 70216-96 1996-97 FXST-FLST PVC Covered Tail Lamp Wires fit 1987-up.
32-0754 70216-98 1998-99 FXST-FLST 32-9331 1987-90 Softail
32-0723 69545-84 Late1984-Early85 FXR-FXRS-RT 32-9336 1991-95 Softail
32-0724 69551-85 1986-88 FXR-FXRS 32-0486 1996-up Softail
32-0725 69551-89 1989-90 FXR-FXRS 32-8009 Handlebar Wiring Harness
32-0727 69551-91A 1991-93 FXR-FXRS Kits are color coded.
32-0960 69555-89 1989-90 FXLR VT No. Years
Type
32-1172 Wire Mount Clips. 32-8009 1982-90
VT No. Fits Extended
32-8108 1996-up
32-1173 32-1172 Fender (10)
32-1173 Tank (10) 48”
Speedometer Connector Kit is used

to modify 1996-1999 OEM harness to
the newer type Deutsch connectors.
Wiring harness can be used with the
32-0587 newer 2000-2003 electronic speedom-
eters VT No. 39-0449 and 39-0651.
Replaces 67418-99. VT No. 32-0587
360
Battery Cable
32-2007 Extreme Duty Battery Cable Battery Cable Assortment. Ground
BIG TWIN
Sets. These #2 gauge wires cable assortment is heavy duty
are very fat and flexible. The replacement type and includes five
battery cables will transfer more pieces of the popular numbers.
cranking power with the very VT No. 32-0317
least amount of voltage drop. Over 2000 bare strands of copper
are covered with special vinyl insulation that is covered by a
synthetic thermo-rubber jacket. Sealed and insulated with black
heat shrink tubing means no moisture will get in these cables.
VT No. Fits Cable Lengths
32-2007 1989-17 FXST 10” and 12”
32-2002 2018-up FXST
32-2008 1991-17 Dynaglide 10” and 15”
Replacement Battery Cables are replacements of the
32-2009 1989-94 FXR 12” and 16”
originals with heat shielded terminal ends.
32-2006 1993-16 FLT 13”and 14”
32-2019 2017-up FLT 13¹⁄₄ and 11¹⁄₈ VT No. OEM Length Fits
For XL Ground
32-2012 2004-up 12” and 13” 32-0327 70011-84C 7³⁄₄” 1984-88 FXST
32-0328 70062-85 11¹⁄₂” 1985-86 FXR
Volt Tech Flexible Battery Cables features a 4 gauge cable 32-0331 70186-82 8¹⁄₂” 1982-92 FLT
manufactured with pure electrolytic-grade 36 gauge tinned cop- 1987-94 FXR
per strands for maximum current transfer and flexibility and a 32-0339 70103-95 9³⁄₄” 1991-95 Dynaglide
specially rated 125° C, oil and gas resistant, ultra-flexible trans- 32-0340 70060-92A 9¹⁄₂” 1989-07 All FXST, FLST
lucent jacket in either black or clear. 32-0341 70267-93A 13” 1993-96 FLT
Clear Black Length Positive
32-1418 32-1419 7” 32-0333 70064-89 9” 1989-90 FXST
32-1400 32-1409 8” 32-1419 32-0334 70033-89 31³⁄₄” 1989-92 FLT
32-1401 32-1410 10” 32-0335 70083-89 11³⁄₄” 1989-90 FXR
32-1420 32-1421 11” 1993-94 FXR
32-1402 32-1411 12”
32-0338 70102-90A 14¹⁄₂” 1991-95 Dynaglide
32-1403 32-1412 14”
32-0340 70060-92A 9¹⁄₂” 1993-94 FXR,
32-1423 15” 32-1418
32-1413 16” 32-0342 70377-93B 14” 1993-96 FLT
32-1405 32-1414 19” 32-0310 70069-65B 15¹⁄₂” Solenoid to Battery and Starter
32-1406 25” 1971-85 All FX, 1984-85 FXST
32-1407 32-1416 30” 65-85 FLH Positive to Solenoid
32-1408 32-1417 33” 1982-88 FXR
Battery Cable Boot to fit cable end at battery terminal. 32-0316 70069-83 15³⁄₄” Solenoid to Starter
VT No. OEM Fits 1983-84 all FX,
32-0354 70595-96 1995-05 FXD 1984 FXST, 83-85 FLH
32-0369 70584-94 1994-07 FXST 32-0330 70100-79A 8¹⁄₂” Solenoid to Starter
32-0360 70578-89 1991-93 FXST 1982-88 FLT
Wiring
Shrink Wrap Tubing is Insulator Wrap is made of
easy to use. Cut to length, black nylon which is fully flexi-
thread the wires, careful- ble which covers wiring and fuel
ly apply heat and watch line. Replaces 63505-84 with
32-0125 the insulation shrink to fit ¹⁄₂” inner diameter, 10 feet.
Primary Wire is 100% multistranded around the wires. 4' length. VT No. 40-0364
copper wire with PVC insulation. Ideal for VT No. Inner Diameter
replacing or rewiring part or all of the sys- 32-0124 ¹⁄₄”
tem. Brightly color coded for installation 32-0125 ³⁄₈”
ease 32-8039 ⁵⁄₈”
#10 Gauge 10’ Roll #16 Gauge 35’ Roll Flex Chrome Hose
VT No. Color VT No. Color Covering features
32-2130 Black heavy gauge mylar
32-2131 Green 32-2137 Green construction with
32-2132 Red chrome finish, 25’ Flexible Wire Loom, black, PVC.
#14 Gauge 25’ Roll #18 Gauge 45’ Roll length. VT No. Inner Diameter Length
32-2134 Green 32-2140 Green VT No. Size 40-0364 ¹⁄₂” 10’
32-2141 Red 36-0552 ¹⁄₄”
36-0553 ³⁄₈”
36-0554 ¹⁄₂”
361
AGM 53-0547 53-0585
Battery
• Lock Bonded Plates
• Stainless Steel 53-0536
Terminal Bolts
53-0545
• Maintenance Free
• Dry
53-0550 53-0789
Dry AGM Battery. The “Absorbed Glass Mat” Technology provides higher cold cranking amps, better rechargeablity with longer
overall life. Note: 1998 and earlier FX models, require battery side cover, VT No. 42-0770 and a top cover, VT No. 42-0785 for
FXD models.
VT No. OEM Year/Model V-Twin Mfg AGM Battery
53-0547 65991-82B 1973-94 FX-FXR
53-0585 65991-75C 1984-90 FXST-FLST
1999-2000 FXR
65991-75V 1973-84 FXE
53-0550 66010-97A 1997-up FLHR-FLHT-FLTR
1998-2009 FL, FLH
53-0545 65989-90B 1991-96 FXD-FXST-FLST
65989-90B 1991-96 FXD-FXST-FLST
53-0789 65989-97A 1997-up FXD, FXST, XL, FLST (Dry) 53-0547
Note: AGM Batteries will require electrolyte and charging before installation.
Unique vent system minimizes leakage.
Bonded cover prevents electrolyte leakage and improves dependability.
“Activator” Battery Filler Positive AGM plate separators ensure long life and improved performance.
attaches to any standard acid Durable AGM plates direct maximum cranking amps to
pack tube. Positive thumb terminals for quick starts.
Heavy top lead lugs provide improved adhesion to the plates for vibration
release valve absolutely controls resistance and long life.
acid flow. No acid spills, burns or Large diameter partition connections direct more power to the terminals.
holes in clothing. Sturdy diameter bushings resist vibration damage and acid leakage which
causes terminal corrosion.
VT No. 16-0037 Durable two position terminals.
Stainless steel terminal screws.
All Batteries are dry charged and do not include electrolyte.
Battery Acid Catch Tank attaches to battery Electrolyte (battery acid) is available at Tractor Supply stores,
vent tube to collect excess acid to protect the nationwide.
frame and lower rear fender parts.
VT No. 16-1739
28-0218
Brass Terminal Kit.
VT No. 32-1024
FXST Battery Hardware for 1984-99 Softail models.

Battery Terminal Hardware Kit VT No. # OEM Item Year
28-2217 A 66105-77 Strap 1984-92
includes pieces to simplify battery 28-0138 B 66004-93 Clamp Pad 1993-99
installations on FXE and late XL 28-0136 D 66109-93 Front Strap 1993-99
models. 28-0137 E 66111-93 Rear Strap 1993-99
VT No. 32-0235 37-8933 F 10067 Vent Clamp 50 pack
28-0423 G 66210-85B Tray Insert 1986-97
28-0218 G 66210-97 Tray Insert 1998-99
In-Line Fuse Holder has 28-0539 H 66309-84 Pad Pair
32-0410 6” long wire leads. 66103-74
32-8946 Dynaglide Battery Tray and Cushions for Dynaglide Models
VT No. Type VT No. OEM# Fits Item
32-0410 Fuse 28-0878 66017-01 2001-up Strap
32-8946 ATC Type
362
53-0502 53-0517
12 Volt Dry Battery
BIG TWIN
53-0518 53-0505
53-0519 53-0526
53-0525 53-0531
53-0789 53-0527
53-0556
53-0553
All Dry Charged

1973-91 FXE-FXR, 1984-90 FXST-FXWG measures 7” x 4” x 61/₄”.
Battery Hardware, bolt kit replaces 66000- VT No. OEM # Type
80 bolt, nut, and spacer for 1973-up FXE- 53-0502 65991-75C 12N16-4B V-Twin, 16 amp
FXR. 53-0554 65991-75B V-Twin, 16 amp
VT No. Item 53-0553 65991-82A V-Twin, 16 amp
37-8867 37-8867 Nut, Bolt, and Spacer, 5 pack 53-0517 65991-82 Yuasa, Yumicron
37-8933 Vent Clamp, 50 pack, 10067 53-0518 65991-82 Yuasa CX 19 amp
32-0517 Vent Tube with Clamp 1991-96 All FXST-FLST-FXD, 7” x 4” x 61/₄”.
All Batteries are dry charged and do not include electrolyte. 53-0519 65989-90A YB16HL-ACX Yuasa CX
Electrolyte (battery acid) is available at Tractor Supply stores, 53-0526 65989-90A YTX20L-BS Yuasa GRT
nationwide. 1980-96 All FLT.
53-0525 66010-82A Y50-N18-ACX Yuasa CX, 8” x 31/₂” x 61/₂”
1997-up FXST
Battery Warranty Information. The battery is unconditionally guaranteed up to 30
days and pro-rated up to 90 days. No guarantee for cracked or physically damaged
53-0789 65989-97A V-Twin
cases or terminals at any time. Damage caused in shipping must be reported to us 1997-up All FLT-FLHR
and carrier 24 hours after receipt of shipping. All batteries shipped dry charged. 53-0556 66010-97A V-Twin
Panhead custom application 41/₁₆” x 319/₃₂” x 41/₂”.
Warranty and Adjustment Policy 53-0505 12N5.5A-3B V-Twin
This battery will be replaced without charge if found to be defective in materials or workman- 53-0527 12N5.5A-3B Yuasa
ship 6 months from date of over-the counter purchase. After 6 months but within 12 months
of over-the counter purchase, the battery will be replaced and the purchaser charged only
12 Volt Anti Gravity Battery. 480 cranking
for the period of ownership based on the regular price at the time of return prorated over the amps.
number of months of warranty. This warranty is available through the dealer to the original VT No.53-0075
retail customer and is not transferable and is voided by the use of rejuvenators, improper
electrolyte, neglect or abuse.
Big Boar Battery

Big Boar Batteries have high cold cranking amps, and a
replacement warranty. The 53-0700 battery is a totally sealed,
maintenance free battery measuring 6⁷⁄₈ long x 6¹⁄₁₆ high x 3⁵⁄₁₆
wide, and has been tested and proven on big inch and high
compression motors.
VT No. OEM Fits AMP
53-0700 65991-82 FX 1973-86, FXR 1982-94, 350
53-0700 53-0703 Softail 1994
53-0701 65989-90A Softail and Dynaglide 1991-up, 350
XL 1997-up 65989-97
53-0702 “Mini” 6” L x 5¹⁄₈ H x 3¹⁄₄” W 230
For custom application that have limited
space. Starts larger engines but does not
have a lot of reserve. Multi-positional.
53-0703 Dresser/Road King® 1997-up 1000
6¹⁄₅” L x 6³⁄₄” H x 5” W
53-0701 53-0702
363
Battery Hardware 42-1002
Battery Cover
42-0701
Chrome Battery Cover fits FXD models, covers top and side
in one piece. Features black lower accent.
42-0502 42-0501 VT No. Year Battery Type
42-0701 1991-05 Lead/Acid
42-1002 2006-up AGM
42-0753 42-0785
42-0500 42-0097 42-0569 42-0568
42-1164
Battery Top Covers.

Chrome Black OEM Fitment
42-0753 42-0569 66368-90 1991-95 Dyna
42-0714 42-0882 42-0785 42-0568 66368-97 1997-05 Dyna
Battery Side Cover. Replacement Battery Top Foam Pads, 10
Chrome Black Fits Style pack.
42-0502 1991-96 all FXD Square View Holes VT No. 28-0626
42-0501 1991-96 all FXD Single Slot View Hole Rubber Battery Pad Set fits 12N16 sized
42-0500 1991-96 all FXD Louvered batteries on FXE and XL models.
42-0097 1991-96 all FXD Louvered w/Square View Hole VT No. 28-0539
42-0714 1991-96 FXD Embossed Chrome FXST-FLST Battery Cover slips
42-0882 42-1164 1997-05 FXD Embossed over the top of the battery on 1984-99 mod-
42-0573 42-0574 1997-05 FXD Embossed els.
VT No. 42-0427
A B D
28-0746 28-0748 Battery Tray Rubbers.
VT No. Type
C 28-0746 Small, 6.4” x 7.15”
Iso Mounting Rubber Studs. All types UNC threads ¹/₄” used 28-0748 Large, 4” x 8”
on XL battery box and oil tank, 28-0619 used on FX dash.
VT No. OEM # Size Type Qty
28-0546 62563-65 A ¹⁄₄” Male-Male 5
28-0549 62563-65T A ¹⁄₄” Male-Male 2
28-0418 w/Spring A ¹⁄₄” Male-Male 5
28-0547 62563-66 B ⁵⁄₁₆” Male-Male Each
28-0402 62569-94 B ⁵⁄₁₆” x ¹⁄₄” XL Oil Tank Each
28-0619 50235-63 C ⁵⁄₁₆” Male-Female Each
28-2247 69125-65 D ⁵⁄₁₆” Male-Male, horn Each
28-0749 28-0636 Rubber Iso Mount has ¹⁄₄” x 20
threads on each end.
VT No. Type Qty
28-0749 Hex 2
28-0636 Lord (Round) 2
FXR Battery Tie Down Screws.
VT No. 37-0560
364
34-1241 Installed Air Cleaner
Chrome Black
BIG TWIN
49-1449
Early Style Carburetor Breather Snoots feature cover with-
out filter. Bendix Keihin and CV is 3 bolt pattern. CV requires
use of 35-0125 for 2000-up Big Twin or 35-0122 for 1993-99
Big Twin.
Chrome Black Type Year
34-1331 34-1450 CV Kit 1991-06 XL
34-1046 34-1449 Bendix-Keihin All
34-1045 34-1448 Linkert
34-0596
34-1081 34-1398 CV 1990-16 Big Twin
34-0659 34-1332 Cover Only
34-0638 34-0640
34-0471 34-0483 34-0485

Chrome V-Charger Air Cleaner Units Only include element.
Order brackets and breather kits as required. Fits 1990-16
FXST, FLST, FXD, 1990-07 FLT
VT No. Style
34-1361 34-1241 34-0638 Smooth with raised beveled center
34-0474
34-0640 Engraved Flames
34-0087 Replacement Cover for 34-0638
34-0700
V-ChargerTM Chrome Air Cleaner for Big Twin features air

scoop “blower” design and includes a built-in chrome screen
and filter element. Kits include brackets and/or integral bracket,
breather system except where noted.
VT No. Type Year
34-0467* S&S 1984-91
Wyatts Air Cleaner Assemblies include integral breather
bracket and related hardware.
34-0471 1993-07 Carb Velo High Flow Air Cleaner
34-0483 1993-07 Carb Assembly features cast
34-0484 1993-07 Carb mount bracket with built in
34-0474 2008-17 EFI breather and filter. Includes
34-0596 1993-07 CV breather bolts and hard-
34-0584* 1984-89 Keihin ware to mount to 1993-07
34-1241 2000-07 EFl Evolution and Twin Cam.
34-1361 1993-07 Flame Cover not included.
34-0623
*Note: Does not have integral breather bracket
VT No. Type Year
Tourist Trophy Breather
34-1163 CV Backing Plate 1993-07
Snoot Kit is Schebler style,
34-0700 S&S 1993-05
casted of aluminum and pol-
34-0623 Electronic Fuel Injection (EFI) 2002-07
ish, for CV and S&S "E" car-
buretor applications. Includes Billet Flame Scoop CV
the side door installed. Fits Air Cleaner includes filter
1993-2007 FLST, FXST. and mount brackets. Fits
VT No. 34-0487 34-0703 1991-99 Big Twin with
carburetor.
VT No. 34-0703
365
Electronic Fuel 34-0406
Installed
34-0054
Injected Air
Cleaner Assembly
34-1084
34-0059
34-1236
7” Round Bobber Air Cleaners.

34-2122
34-2122 34-2124 VT No. Year Fits
34-0406 1993-07 Black, CV
34-0054 1993-07 CV Black with integral breather
34-0059 1993-07 CV Chrome with integral breather
High Flow Air Cleaner Kit

includes backing plate and
Performance Air Cleaner and Breather Kit includes backing elements. Fits electronic fuel
plate, air filter, breather manifold and hardware. injection 1999-01.
VT No. Fits 34-0943 VT No. 34-0943
34-1084 1993-07 Ev-Twin Cam
34-1236 2002-07 FLT, 1999-15 FXST-FLST, 1999-07 FXD
34-2122 2008-13 FLT Sifton Air PowerTM includes
34-2124 2000-07 FXST-FLST, 1999-07 FXD, 2002-07 FLT die cast backing plate, filter and
34-2126 2008-13 FLT 90° breather canisters. Hardware
34-0948 Replacement filter only for 34-1236 included allows installation on
34-1040 Replacement filter only for 34-1092 and 34-1093 1992-99 Evolution and Twin
34-1238 Replacement filter only for 34-1243 Cam models with carburetor.
34-1239 Replacement filter only for 34-1242 Order cover separately as list-
34-1512 Rubber Tube Inserts 34-1113 ed below. Breather bolts also
available separately.
VT No. Item
34-1113 Air Cleaner Kit
for 1993-07 CV and
EFI with Delphi
34-0655 34-0655 Teardrop Cover
34-1084 Backing Plate Kit
34-1458 34-1466
34-1457
Performance Round High Flow Air Cleaner Kit is center bolt

style. The one-piece cast back plate is system machined to the
34-1459 34-1460
throttle body to deliver a smooth uninterrupted flow, and shaped
Air Cleaner Outer Cover for use with K&N replacement or to permit air to enter around the perimeter of the air cleaner
velocity type tapered air filter available separately. housing. The back plate is topped with a washable filter. This
VT No. Finish Style can be fitted with most round accessory center-bolt air cleaner
34-1457 Black Swiss Cheese Design covers. This kit includes air cleaner element, gloss black back
34-1458 Chrome Ball Milled plate, breather and all required hardware. Fits 2017-up FLHR,
34-1459 Black Ball Milled Flames FLHT, FLHX, 2018-up FXBB, FXLR, FXFBS.
34-1460 Black Ball Milled VT No. 34-1466
366
34-1105
Velo Air Cleaner
Assembly
BIG TWIN
Teardrop
Air Cleaner
Assembly
features
hi-flow ele-
ment with
billet mount
bracket and
plate. Kit
34-1076
include all
hardware to
mount on
Evolution and
Twin Cam,
1993-2007
models.
34-0672 VT No.
34-0672
34-0804
Velo High Flow Air Cleaner Backing Plate Kit by Sifton.

Includes one piece alloy backing plate, washable element, Tourist Trophy Breather Snoot Kit is Schebler style, casted
stainless steel breather kit with fittings, chrome breather filter of aluminum and polish, for CV and S&S "E" carburetor applica-
and necessary hardware to mount 1992-07 Big Twin Evo and tions. Includes the side door installed. Includes adapter flange to
Twin Cam models VT No. 34-1076 accepts 8” round covers adapt snoot to CV carburetors. S&S "E" models do not require
with 52” of surface, measuring 7” x 23/4” deep. Cover not this flange. *NOTE: This is not an air cleaner. Fits1988-2006
included. XL,1993-2007 FLST, FXST.
VT No. Size Cover VT No. 34-0487
34-1105 Small 6”
34-1076 Large 8”
34-0804 Velo Air Cleaner Assembly
Billet Air Cleaners

34-0826 34-0827 34-9159
Chrome Billet Air Cleaner Assemblies to fit CV carburetors.

Order bracket kit as required.
VT No. Type
34-0826 Diamond
34-0827 Spade
34-9159 Rotar
34-9159 Installed
367
Air Cleaner 1984-up 34-0115
34-0548
Cover
20% More Air!
34-0115
34-1084 Installed
34-0948 TC-88 Filter Upgrade Kit includes washable filter and longer
stud set to replace Screamin’ Eagle elements. There is 20%
more air flow with this filter. Order cover separately.
VT No. Item
34-1391 34-0115 Twin Cam Filter Upgrade Kit
Performance Air Cleaner and Breather Kit fits carbureted or 34-0548 Evolution 8” Chrome Cover
electronic fuel injection models and includes backing plate, air
34-0117
filter, breather manifold and hardware. 34-0118
VT No. Fits Type
34-1084 1993-07 Ev &Twin Cam Carburetor Only
34-0948 Filter Only
34-1391 Backing Plate
34-0406 Installed
6" Chrome Dome Assembly

VT No. Fits
34-0117 Bendix & Keihin carb
34-0118 Keihin CV carb
34-0566
Installed
7” Evolution Type Air Cleaners include cover, foam, backing

plate. Order brackets separately.
VT No. Type Item
34-0406 CV Black
34-0566 Chrome Cover Only
368
Air Cleaner Kit
BIG TWIN
34-0941
34-0946 34-1053 34-1064 Sifton Performance Air
Cleaner Kits include filter,
breather tube, chrome
mini breather bracket and
mount hardware for carbu-
reted models listed. Order
34-0548 34-1256 34-0415 cover separately.
8” Air Cleaner Assemblies include cover, backing plate and
element.
Chrome Black Style 34-0940 34-0944
Bendix-Keihin
34-0946 — Smooth
CV
34-1053 — V
8”
34-1256 — American Motorcycles
34-0415 — Bobber Style
8” Center Screw Cover Only VT No. Year Model
34-1064 American Motorcycles 34-0940 1993-99 Evolution
34-0548 34-0407 Smooth 34-0941 1999-07 Twin Cam
Notes: For 1993-up models order 31-0430 breather kit, Pre 34-0944 1999-07 Twin Cam
1993 models use 31-3941 bracket. 34-1390 34-2122 2008-17 EFI
34-1354 34-1355 34-1380 34-1379 34-0566 All 7” Cover
Chrome Black Size Item

Complete Air Cleaner Kits
— 34-0407 8” Complete, CV
34-0409 7” Complete, CV 34-0566 Installed on 34-0940
Air Cleaner Covers.
34-1354 34-1355 8” Cover Only
34-1379 34-1380 7” Bobber Style Cover 34-0948
34-0533 — 8” Round Cover 34-0744
34-0948 — Air Filter
34-0947 — 8” Air Filter
34-0744 34-0781 8” Round Stripes
34-0809 34-0807 34-0655
Installed Installed Chrome Teardrop Air Cleaner Cover Kit fits Velo or
Screamin’ Eagle Air Cleaner Kits with filter as shown. Filter
VT No. Item
34-0655 Teardrop Cover
Velo Dish Air Cleaners feature chrome dish and full flow 34-0948 Filter Only
filter with bracket with integral breather passages and hard- 34-1290
ware. Fits 1992-17 FXST carburetor and 2002-17 FXST and
FLT Fuel Injected models.
VT No. Size Filter
34-0809 6” 34-0948
34-0807 8” 34-1067
Miscellaneous Air Cleaners.
34-1289
34-1533 CV Carb Backing Plate Sifton Air Cleaner Kits include a hi-flow “Cycovator” element
34-0463 7” J-Slot Air Cleaner Cover with an integral metal backing plate for a direct bolt on applica-
tion for carburetor and electronic fuel injected models. Reuse of
some original hardware required.
VT No. Item Model
34-1289 2008-13 Touring
34-1290 1993-07 CV-Delphi EFI Big Twin
369
Air Cleaner A 34-1318
34-1255
34-0098 34-0524 34-1318
C 34-1095
34-1334 Hi-Flow Air Cleaner

Installed includes integral bracket with
breather bolts. 34-1292
VT No. Item
34-1255 1993-07
34-1334 Cylovator Inverted
34-0098 Bolts
34-0464 Bolt Kit
Chrome Air Cleaners. New Era, B, C, and Round A styles.
Includes chrome cover, element and backing plate. Round
34-1095 type is 7” with center screw. Order the brackets separately.
Installed VT No. Style
Bendix Keihin Type Pre 1989 Big Twin
34-0977
34-1292 Chrome, Smooth
34-0977 Element only
CV Type 1989-up Big Twin
34-1095 Chrome smooth
34-1318 Black smooth
34-0977 Element only fits C
34-0905 Element only fits A
34-1095
34-0802
34-0905
7” V-Logo Smooth
34-1373
7” Air Cleaner Assemblies include backing plate, cover and

foam element. Center screw type Bendix-Keihin.
Chrome Black Style
34-0505 — V-Logo 34-0408
34-0547 34-0408* Smooth
CV 7” Air Cleaner.
34-1032 34-0406 Smooth Chrome Black
CV and Delphi EFI, measures 51/2” outside. 34-0505 — V-Logo Bendix-Keihin 3 bolt
— 34-0406 Bobber
34-0802 — 1993-99 Big Twin
34-0553 — Smooth with mount brackets
34-1306 — 1993-99 Black, CV & EFI 34-1032 — Smooth without mount brackets
34-0937 — Screen, Chrome 34-1373 — Shield, Chrome round w/brackets
*Note: Features Bobber Style Cover 34-1041 — Smooth Air Cleaner Cover Only
Wyatt Gatling Assembly includes round 34-1042 — V-Logo Air Cleaner Cover Only
deco air cleaner with chrome cover, 34-1392 — Smooth Assembly
integral breather system with bracket and 34-0555 — Eagle cover only
mounting kit. 34-1561 — Smooth Cover Only
VT No. 34-0840 — 34-1562 Cover Only Black Powder
7” Filters. 34-1044 — Backing Plate CV
VT No. Type 34-1428 — Backing Plate EFI
34-1277 Washable
34-0916 34-0905 Unifilter Foam
34-1277 34-0905
34-0916 V-Twin Foam
370
34-0425
Air Cleaner
BIG TWIN
34-1463
34-1462
Performance Air Cleaner and Backing Plate fits 1999-15
FXST, FLST, 1999-07 FXD and 2002-07 FLT. Includes wash-
able element and backing plate only. Requires 8” stock type
cover and mounting hardware
VT No. Backing Finish
34-0425 Natural
34-1462 Chrome
34-1463 Black
High Flow Air Cleaner Assembly

“Big Sucker” Air Filter Kits for carbureted or electronic fuel
injected Twin Cam and EV2 Big Twin models. The all-in-one
backing plate features a built-in carburetor support and built-in
breather tunnels at each head to decrease crankcase pressure.
Each tunnel exits at the mouth of the carburetor to create a
34-0112 virtually closed loop system. No oil hoses, no oil fittings, and no
leaking! Stage I kit features a High-Flow filter that accepts all
1993-up oval or round outer covers. Stage II kit features a 20%
larger High Flow filter that requires an 8” 34-0548 or OEM outer
cover. Both kits include a “Big Sucker” aluminum backing plate,
high-flow air filter, chrome banjo bolts for TC88 and 1993-up
EV2 Big Twin, simple instructions and all the necessary hard-
34-0178 ware.
34-0114 Stage I Stage II
34-1128 34-0112 1993-99 Carburetor
34-0105 34-0178 34-0114 1999-2013 TC models
Will not fit 2008-13 FLT
Will not fit 1999-01 EFI FLT
34-0184 34-0185 2008-13 FLT
34-1128 34-0105 1999-01 FLT EFI, does not fit 1997-98
34-0192 2014-16 FLT
Filter Only Fits
34-0948 34-1067 34-0948 Stage I Kits 34-0112, 34-0178
34-0622 34-1128 Only
34-1067 Stage II Kits 34-0114
34-0098 Bolt Set
Hardware Listing
34-0098 34-1136 Hardware Set
Stage I 14-0507 O-Ring
7”
Stage II
8” 34-0186
34-0187
Stage I Kit 34-0184
Stage II Kit 34-0185
35-0184
34-0566
Installed
34-0548
34-0548 cover fits Stage II. 34-0566 cover fits Stage I.
371
Air Cleaner Velo High Flow Air Cleaner
Assembly features cast
mount bracket with built in
34-0501 34-1325 34-0733 breather and filter. Includes
breather bolts and hardware
to mount to 1993-07 Evolution
and TC-88. Cover not includ-
ed.
VT No. Type Year

34-0506 34-0040 34-0617 CV 1993-07
34-1163 CV Backing Plate 1993-07
34-0700 S&S 1993-05
34-0623 Electronic Fuel Injection (EFI) 2002-07
Black
with
Chrome Black
Flame with
Screen Chrome
Spoke
34-0244 34-0242 Screen
34-0732 34-0742
34-0235
34-0764
34-0906
Air Cleaners include elements.

Chrome Black Element Fits
34-0501 34-1325 34-0079 Bendix-Keihin
34-0733 — 34-0079 S&S “E”
34-0040 34-1370 34-0078 Bendix-Keihin
34-0506 — 34-0906 Bendix-Keihin with Chrome Mesh Wyatt Gatling Air Cleaner Kits include backing plate and
For CV hardware to connect breather fittings in head.
34-0732 34-0742 34-0079 Round Chrome Black Style Fits
34-0746 34-0764 34-0078 Turbo with with
Air Snoot Kit is Black Chrome
34-1403
polished. Fits CV Screen Screen
Installed
carbs. Does not 34-0233 34-0242 Spoke 2008-16 FLT
include provision for 34-0235 34-0244 Flame 2008-16 FLT
filter. This is not an 34-0236 34-0245 Spoke 2001-15 FLST, FXST,
air cleaner, only an 2000-07 FLT, 2000-17 FXD
34-0238 34-0247 Flame 2000-07 FLT, 2000-17 FXD
air duct.
Carburetor will still
require a support 34-1501
bracket or breath- Chrome Smooth Teardop Air
er-bracket combina- Cleaner fits 1990-90.
tion. VT No. Style
VT No. 34-1403 34-1501 Teardrop
34-0560 Mount Kit
372
34-1601 34-1602 34-1603
Air Cleaner
34-1618 34-1620 34-1621
BIG TWIN
34-1604 34-1605
34-1622 34-1623 34-1625
34-1606
34-1607 34-1608
Wyatt Gatling Air Cleaner Assemblies.

• Include integral breather system with bracket, mounting kit and air
cleaner.
• Include air filter element.
DIY easy install bolt-on assembly has no hoses to connect!
BT Assemblies fit 1993-2007 FXST, FXD.
34-1634 Assembly Air Shape Style
Cleaner
34-1601 34-0406 Round Black, 7”
34-1427 34-0407 Round Black, 8”
34-1602 34-0764 Oval Black, Mesh
34-1603 34-0746 Oval Chrome, Mesh
34-1604 34-1206 Diamond Billet
34-1605 34-1373 Round Chrome, 7” Motorcycle Logo
34-1626 — Round Chrome, 7" Smooth
34-1611 34-1612 34-1606 34-0475 Oval Chrome
34-1607 34-0742 Round Black, Mesh
34-1608 34-0732 Round Chrome, Mesh
34-1609* 34-1119 Velocity Stack Chrome
34-1636 — Velocity Stack Chrome
34-1611 34-0762 Round Chrome, Drilled
34-1612 34-0763 Round Chrome, Baby Moon
34-1637 — Round Chrome, 8" Smooth
34-1638 — Round Chrome, 8" V Logo
34-1639 — Round Chrome, 8" American Cycle
34-1363 — Round Chrome, Swiss Cheese
34-0840 — Round Chrome, Deco
34-1613 34-1374 Oval Chrome, Late Style
34-1613 34-1614 34-1614 34-0628 Teardrop Chrome, Maltese
34-1618 34-1742 Round Chrome, Hole Pattern
34-1619* 34-1081 Breather Snoot Chrome
34-1620 34-1022 Teardrop Chrome, Smooth
34-1621 34-0530 Teardrop Chrome, Finned
34-1622 34-0511 Teardrop Chrome, Flame
34-1623 34-0630 Teardrop Chrome, Slotted
34-1624 34-0629 Teardrop Chrome, Skull
34-1625 34-1020 Teardrop Chrome, Live to Ride
34-1632 — Teardrop Chrome, Smooth
34-1633 — Teardrop Chrome, Skull
34-1851 — Teardrop Chrome
34-1361 — V-Charger Chrome, Flame
34-1365 34-1334 Inverted
34-1630 — Diamond Chrome
34-1631 — Diamond Chrome, skull
34-1629 — Sweeper Chrome
34-1635 — Scoop Chrome
34-1631 34-1634 — Dish Chrome
34-1635 34-1640 — High Flow, Exposed
*Note: Does not include filter element
373
Air Cleaner 34-0924
34-0510 34-0512
34-0475
34-1422 34-1350
34-0930
5³⁄₄” Chrome Air Cleaners are for 3 bolt carburetors. Includes

foam washable element, 2¹⁄₄” thick.
34-0432
Bendix- Bendix Oval Air Cleaner Assemblies.
Keihin Keihin CV Type CV Type Element Item CV Keihin
Chrome Black Chrome Black 34-0475 34-0924 Assembly
34-0510 34-0010 34-0762 34-1419 34-0079 Drilled 34-1350 34-0930 Backing Plate
34-0512 34-0763 34-1422 34-0079 Smooth 34-0432 — Black Oval Insert
34-0915 34-0915 Element
Only
34-0560 34-0560 Mount
Kit
34-1345 34-1347
34-0831 34-0821 34-1284
Axel’s Chrome Billet Air Cleaners fit to CV carburetors. Order
mount kits separately. Bracket listed features built in breather
passage and includes bolts for Evolution and TC-88 models.
34-1346 VT No. Style Model
34-0821 Diamond CV
34-0831 Skull CV
34-1284 Skull CV
34-0837 Diamond S&S
34-0661 Bracket Evolution and TC-88
34-0642 34-0643
34-1345
34-0644 34-0645
Rodan Billet Air Cleaners available with hidden or external
screws on cover to fit CV models.
External Hidden Screws Type
34-0644 34-0642 Flame
34-0645 34-0643 Smooth
34-1346
Black Hi Lighter Air Cleaners. Order bracket kit separately.
VT No. Style
34-1345 Torque
34-1346 Heathen
34-1347 Luxe
see note onfor important information regarding emission control regulatory compliance and warranty information.
374
34-1146 Installed
Air Cleaner
BIG TWIN
Chrome Maltese Carburetor Cover includes backing plate and Turbo-Fan Velocity Stack
34-1204 includes billet stack with inverted
filter. Available as kit or carburetor cover and backing plate only.
Kits include brackets and or breather kits as required to fit stock cone filter installed. Turbo fan
original carburetor. Center portion of cross is matte chrome turns on precision ball bearings
finish. up to 10000 RPM.
34-0608 VT No. Year Model VT No. 34-1204
34-1145 2000-07 TC-88
34-1146 1993-99 Big Twin
34-1147 1990-92 Big Twin
34-1168 34-1148 1984-89 Big Twin
Maltese Carburetor Cover and

Backing Plate. Center portion of cross
has a matte finish. Order filter and Chrome Black
brackets separately.
Chrome Polish Carburetor Type
34-0609 — CV
34-0610 — S&S “E”
34-1168 34-1168 Filter Only
34-1130 Cover Only Early Style Carburetor Breather Snoots feature cover with-
out filter. Bendix Keihin and CV is 3 bolt pattern. CV requires
use of 35-0125 for 2000-up Big Twin or 35-0122 for 1993-99
Chrome Velocity Stack Kits Big Twin.
include 2.5” chrome stack, Chrome Black Type Year
chrome support bracket and 34-1331 34-1450 CV Kit 1991-06
breather kit with black or stain- 34-1046 34-1449 Bendix-Keihin 1972-84
less hose kit as listed for stock 34-1045 34-1448 Linkert
Keihin or Bendix carburetors. 34-1081 34-1398 CV 1988-up
34-0659 34-1332 Cover Only
With breather
Turbo Funnel Fan for use with velocity
Black Hose SS Hose Year Model
stack air cleaner.
34-1115 34-1122 1993-99 Big Twin Evo
VT No. 34-1199
34-1116 34-1123 2000-07 Twin Cam
Without breather kit
34-1117 — 1990-92 Big Twin Evo
34-1118 — 1984-89 Big Twin Evo
34-1126 — S&S E & G All
34-1127 — 4” S&S E & G All 34-1108
Chrome Velocity Stack
34-1161 34-1150
Kits include chrome support
bracket, breather nipples
and 2.5” chrome stack.
VT No. Model
34-1161 1992-99 Evo
34-1151 1999-07 Twin Cam
34-1150 Bracket Chrome Alloy Velocity Stacks.
VT No. Fits Length
34-1102 S&S “E/G” 4”
34-1108 S&S “E&G” 2.5”
34-1103 Bendix Keihin 2.5”
34-1104 CV Keihin 2.5”
34-1156 CV Keihin 4”
15-0884 CV Gasket
15-0885 Bendix Gasket
34-1159 Screen
375
Teardrop SLOTTED FINNED SMOOTH WITH
FLAMES
Air Cleaner
34-2123
SMOOTH EAGLE SPIRIT, EAGLE

GOLD SPIRIT
34-2125
34-0629
Chrome Teardrop Air Cleaner Assembly includes filter and
backing plate to fit CV and electronic fuel injection applications.
Order breather and brackets separately.
VT No. Item
34-2123 Assembly 34-0527
Installed
34-2125 Cover Only
34-0532
34-0453
34-0916
34-0455
34-1020
Teardrop Air Cleaners. Order appropriate bracket set sepa-
Chrome Scoop Air Cleaner Cover mounts with 3-screws. rately.
VT No. Model Item Pre 1987
34-0453 S&S “E” Cover VT No. Style
34-0455 CV Complete 34-0532 Eagle Spirit, Chrome, Bendix Keihin type
34-0544 Eagle Spirit Gold
34-0516 Smooth Chrome
34-0515 Smooth Polished
34-0520 Smooth Chrome Steel
34-0527 Smooth Chrome with Flames
34-0528 Finned Chrome
34-0668 34-0631 Slotted Chrome
Installed 1988-up CV Type
34-1020 Live to Ride, A Way of Life Chrome
34-0668 Axel’s Chrome Billet Sweeper Air 34-1022 Smooth Chrome
Cleaners fit to CV carbs. Order mount kit 34-0511 Smooth Chrome with Flames
separately. Bracket listed features built in 34-0530 Finned Chrome
bolts for Evolution and TC-88 models. 34-0630 Slotted Chrome
34-0628 Maltese Chrome
VT No. Style Model
34-0629 Skull Chrome
34-0668 Sweeper CV
34-1343 Chrome Teardrop
34-0661 Bracket 1992-94 Individual Parts For Above Units
34-0518 Chrome Cover only
34-1560 Finned Cover only
Carburetor Vent Fitting chrome steel nipple is ¹⁄₈” 34-0519 Bendix Keihin Backing Plate
34-1054 CV Backing Plate only, Alloy
NPT for air cleaner back plates. 37-8556 Chrome Three Piece Screw Kit
VT No. Hose Size Angle 34-0545 Eagle Spirit Chrome Cover only
40-0581 ⁵⁄₁₆” Straight 34-0905 Uni-filter Element only
34-0916 Foam Filter Element
40-0532 ⁵⁄₁₆” 90° 34-0251 VT Element
Brackets For Tear Drop Air Cleaners.
31-0430 1993-up Big Twin Evolution except Dynaglide
376
34-1431 34-1432 34-1433
Air Cleaner Insert
34-0557 34-0558
BIG TWIN
34-1434 34-1438 34-1439
34-0986 34-0987
34-1440 34-1441
Air Cleaner Inserts fit recessed area.

VT No. Fits Type
34-0557 Evolution 8” Chrome
34-0558 Evolution 8” Gold Inlay
34-0986 Oval Chrome
34-0987 Oval Gold Inlay
Inserts for Stock Round Air Cleaner to fit original covers.
Chrome/ Black/ Chrome/ Black Chrome/ 34-0060 34-0088
Chrome Chrome Gold Gold Black Style
34-1431 34-1432 34-1433 34-1434 Eagle
34-1438 34-1439 34-1440 34-1441 Flame
Air Flow Air Cleaner Insert available in chrome or black finish

Includes mounting hardware. Fits 1999-15 Big Twin except
2008-15 FXD models. For use with stock type air cleaner
cover.
VT No. Finish
34-0060 Black
34-0088 Chrome
Air Cover Screws

Air Cleaner Cover Allen Mounting Chrome Air Cleaner Screws.
Kit. VT No. # Size Style, U/M
VT No. 9916-2 37-8556 B ¹⁄₄ — 20 S&S, 3 pack
8212-3 C ⁵⁄₁₆ — 24 Early Stock
7206-2 A ⁵⁄₁₆ — 24 1957-77 Acorn, 2 pack
8461-2 As Above Cap
Air Cleaner Cover Mounting
9916-2 B ⁵⁄₁₆ — 18 Chrome Flat Allen
Screws. Chrome custom button
37-2096 C ⁵⁄₁₆ — 24 Early Stock, 4 pack
head countersunk allen screws
mount cover on S&S air cleaners.
Three screws per kit.
VT No. 9980-3 37-8556
377
Teardrop Air Cleaner Chrome Air Cleaner Cover is a
teardrop shape. Fits 2008-17 FXD,
Softail electronic fuel injected mod-
34-0400 els.
VT No. 34-1291
Chrome Swiss Cheese Air

34-1742
Cleaner Kit features a chrome
finish. Kit includes chrome swiss
34-0401
34-0444 cheese style cover with black
2000-17 Twin Cam Oval Chrome Steel Air Cleaner Covers. mesh, high flow tapered filter,
VT No. Model cover adapter and mounting
34-0400 Electronic Fuel Injection hardware. Fits 1993-07 FLT.
34-0401 Carburetor VT No. 34-1742
34-0444 Smooth Insert Chrome Swiss Cheese Mesh Cover is for use
34-0663 with 34-0948 tapered type high flow air clean-
er filter. Includes features a chrome finish. Kit
includes chrome swiss cheese style cover with
black mesh, high flow tapered filter, cover adapt-
er and mounting hardware. Fits 1993-07 FLT.
VT No. 34-0276
34-0822 34-0822
Installed
34-0650
installed
34-0823
Teardrop Air Cleaner Kits include chrome air cleaner assem- 34-0824
bly with smooth, finned or flame teardrop cover, chrome mount
bracket and a breather kit with a black hose and breather unit.
Finned Smooth Flame Year/Model Flow Swept Air Cleaner Assembly fits 1993-17 Evo and
34-0663 34-0656 34-0650 1992-99 Big Twin TC-88 models. Order VT No. 34-0823 bracket kit separately.
34-0664 34-0657 34-0651 1999-07 TC-88 VT No. 34-0824 backing plate accepts 8” type air clear cover.
VT No. Item
Chrome Slotted Air Cleaner Assembly 34-0822 Air Cleaner
fits CV only. Order bracket and breather 34-0823 Bracket Kit 1993-17 Evo and 1999-07 Twin Cam
kit separately. 34-0948 Filter Only
VT No. Year Bracket Kit 34-0548 8” Cover
34-0630 1993-99 35-0122
34-1263 34-1264 34-1262 34-1501
34-1527
5” Mini-Teardrop Air Cover fits CV car- Backing Plates

buretors. Order backing plate separately. 34-1294 Linkert
VT No. Style 34-1268 CV
34-1263 Maltese
34-1264 Skull
Siren Air Cleaner Assemblies include cover, backing plate 34-1262 Smooth
and mount hardware for Big Twin. 34-1501 Smooth
VT No. Year
34-1527 1984-99
34-1528 1999-08 FXST, FLST, FXD, 1999-07 FLT Air Cleaner Mounting Lock and
Bolt Kit includes lock and zinc bolts.
1984-85 BT. 29168-83A+3787
VT No. 3161-4
378
S&S Air Cleaner
34-1110
34-1174
BIG TWIN
34-1174
Installed
Velocity Stacks with built in mount brackets. Breather set

Chrome Scoop Air Cleaner Cover mounts with three screws. included. For S&S “E” TC-88/Evolution 1992-up.
VT No. Model Item VT No. Style
34-0453 S&S “E” Cover 34-1110 Standard Kit
34-0455 CV Complete 34-1174 Billet Kit
Chrome Steel
Air Scoop fits
S&S E & G car-
buretors.
VT No. 34-0985
34-0707 34-0545
34-1190 Billet Carburetor Support on
Chrome Air Cleaner Covers fit S&S carburetors stock backing
S&S “E” installations. Order
plate and filter, “bolt on.”
banjo bolts and brackets sep-
Super E Super B Style
arately for Evolution or TC-88.
— 34-0545 Eagle Spirit Chrome
Bracket only drilled for S&S. No
34-0707 — Skull
34-1139 holes for CV air cleaner.
34-0709 — Maltese
VT No. Finish
34-0710 — Flame
34-1139 Chrome
34-1190 Alloy 34-1176 34-0935 Replica Air Filter
Velo-Dome ™ Elements fit S&S models

and are washable.
VT No. Model
34-1176 E&G
34-0935 B
34-1015
34-1189
34-0981
Velo-domeTM is Wyatt’s
velocity stack with built in
Chrome S&S Super E & G Replacement Air Cleaners
cover for Super “E”.
are available as complete units, or replacement covers only.
VT No. 34-1189
Complete assemblies include backing plate which have built-
in brackets to mount to Evolution heads. 1993-99 Evolution
Curved Air Cleaner fits
Big Twins with Super E & G carburetors.
1993-2006 FX, 1988-07 XL.
VT No. Item/Fits
VT No. Style
34-1015 Complete Assembly 1993-99 V2 Big Twin
34-0084 Eagle Spirit
34-1189 34-0981 Chrome Cover All Super ‘E’
34-0085 Flame
34-1063 As Above with Notched Cover for 5 Gallon Tanks
34-0984 Uni Filter Foam Air Filter Super ‘E’ Foam Type
9980-3 Chrome Allen Screw Set for S&S Covers
34-1097 Backing Plate 1984-92
34-1098 Backing Plate 1993-99
15-0354 Mounting Gasket
379
Air Cones 34-1211
34-0772
Chrome Panzer Air Cone can be installed on C.V. or S&S

Super E carburetors. Cone can be mounted in either vertical
34-1211
or horizontal position. Includes air filter. Order routing bracket
separately. 34-0775
VT No. 34-0772
CV Air Cleaner Cone System features cone and integral
34-0771 34-0771
breather mount bracket for vertical or forward mounting. Order
Installed adapter plates for vertical applications.
VT No. Carburetor Type
34-0775 S&S “E”
34-1211 1993-07 CV, Delphi EFI
34-0770 34-0488 34-0488

Installed
Air Cleaner Breather Only includes cone, element and elbow

as shown. Fits 1993-2007 CV in the horizontal position.
VT No. Type
34-0770 Spike Wind Funnel Air Filter Kit includes bracket with integral breath-
34-0771 Funnel er which will mount the funnel in a forward horizontal position.
34-0274 Filter Only Order with or without turbo fan.
VT No. Type
Cycovator Taper Forward
34-0488 Fan (1993-2007) with CV carburetor
Mount Air Cleaner Only
34-1207 Without
fits 1993-07 CV FLT except
1995-01 EFI, 1993-2007
FXST, FLST, FXD, 1993-94 • Super Spiral runs ups to
34-0773 10,000 RPM to match your
FXR. high revving engine.
VT No. 34-0773 • Help provide a better fuel
34-1197 mixture and combustion
34-0670
34-0670
Turbo Funnel will mount on
34-0670 installed with CV carburetor bolt pattern in
34-0693 adapter a forward horizontal position.
Order adapter plate 34-0693
to place in upright vertical
34-0451 with position. Fits 1993-2007 Big
34-0693 adapter Twin CV-Delphi-EFI
VT No. 34-1197
Air Cleaner Breather includes steel bracket with breather

bolts and tapered filter element with chrome 90° intake tube 34-0451 Installed
to face forward on CV carburetors. Order adapter to face for- 34-0451
ward or upward on S&S models. Use 34-0670 with 34-0693
adapter. For 1993-07 models.
VT No. Item Style
34-0670 Spike Forward
34-0451 Funnel Forward
34-0673 S&S Adapter
34-0693 CV Vertical Adapter 34-0671
34-0671 Filter Only (Spike)
34-0274 Filter Only (Funnel)
380
34-1374
Air Cleaner
BIG TWIN
34-1382
34-1340
34-0062
Oval Air Cleaner Assembly. Kit with
VT No. Fits cover
34-1374 CV 34-1340
34-1382 Keihin installed
Diamond Billet Cycovator Air Cleaner Kit fits 1999-up Big Twin with carbu-
Air Cleaner fits retor. High filtration element included with all parts as pictured.
CV models. Order 34-1186 adapter sleeve to fit 1993-98 Evolution models.
VT No. 34-1206 VT No. Item
34-0062 Kit with cover
Maltese Velocity Stack fits CV and S&S carburetors with 34-0107
unique fluted design. Order S&S adapter to fit “E” carburetors.
This QuaductiveTM design increases air flow. Screen included.
Order screws separately.
VT No. Item Finish 34-3915
34-3915 CV Stack Chrome
34-0673 S&S “E” Adapter Alloy
34-0661 Bracket Only CV Chrome
34-0662 Bracket Only S&S E Chrome K&N RK Series Air Cleaner Assembly for 1999-07 Twin
34-1111 Screen Stainless Steel Cam Big Twins with a carburetor. Complete assembly provides
37-0894 Screw Set (3 Pieces) significant increase in air flow to the engine while boosting
performance and filtration. Features a built in Dyno tuned veloc-
Cone Air Cleaners ity stack, powder coated aluminum backing plate and internal
breathers. Uses stock type air cleaner cover.
VT No. Height
34-1504 34-0891 34-0107 1⁵⁄₈”
V-Force Air Cleaner fits CV and
electronic fuel injection models.
Order breather bracket separate-
ly. (1993-07 CV-Delphi-EFI)
VT No. 34-1882
Filters fit as noted are attached by worm drive clamp. Inner
diameter of 65 mm. James Air Cleaner Back Plate
VT No. Length (mm) Gasket Kit includes gaskets and
34-1504 133 mm O-Rings.
34-0891 175 mm VT No. Fits
15-1387 1999-01 FLT
15-1388 1999-05 FXST, FLST, FXD,
2002-05 FLT
15-1389 2006-08 FXST, FLST, FXD,
2006-07 FLT
381
Replica Air Filter
34-0251 34-0948 34-1348 34-1334 34-1324
34-0935 34-1176
34-0737 34-0740 34-1208
34-0066 34-0933 34-0962 34-1171

Replica Paper Air Filters feature original shape and styling for exact fit. Washable construction.
For Aftermarket Air Cleaner
VT No. Fits
34-0935 S&S Super "B"
34-1176 S&S Super "E" & "G"
34-0251 S&S Super "E" & "G" Teardrop
34-0948 Tapered, Velo, Ness & Screamin' Eagle Stage 1 Multfit Kits; Pre-Oiled
34-1348 Tapered, Velo, Ness & Screamin' Eagle Stage 1 Multfit Kits; Pre-Oiled 34-0063
34-1334 Inverted Cone Type, Velo, Ness & Screamin' Eagle Stage 1 Multfit Kits; Pre-Oiled 34-1067
34-1324 Screamin' Eagle Stage 1 Touring Kits and 2016-17 FXST kits
34-0066 Burst Collection 34-0626
For Big Twin models with Stock Air Cleaner
34-0933 1991-95 Evolution 1340 Dyna, FXR, FXST, FLST, FLT
34-0962 1991-06 Twin Cam, carburetor, 2002-07 carburetor and electronic fuel injection
34-1171 1999-01 Twin Cam FXST, FLST, FLT, FXD with electronic fuel injection
34-0737 2008-17 FXD-FXDWG
34-0740 2008-17 FXD OKO High Flow Replacement Air Filter is for 34-1066
34-1208 2008-13 FLT, FLHT round air cleaners. Air filter is washable and
34-0063 2014-16 FLT, 2016-17 FXST, FLST reuseable. OEM# 29400358. Fits 2017-up FLT,
34-1067 Sifton Air PowerTM FLHXXX.
34-1066 Screamin’ Eagle VT No. 34-0626
34-0984 34-0917
34-0905 34-1298
34-0579
34-0576
K&N Aerosol Recharger
34-0973 34-0736
Service Kit is a six step main-
tenance system designed to
recharge any K&N air filter.
Restores air flow efficiency.
Includes 6.5 oz spray oil and
34-0958 12 oz filter cleaner.
34-0971 34-1047 34-0955 VT No. 41-5000
Air Filters are available in 3 types, K&N paper, Uni Filter foam For Big Twin Models
and Accel 2-stage foam. 34-1328 — — 2014-16 FLT, 2016-17 FXST,
All have screen insert. FLST
K&N Accel Uni Foam Fits 34-0737 — — 2008-17 Dynaglide
For Aftermarket Models 34-0736 — — 2008-13 FLT, FLHR
34-0960 — 34-0905 S&S Super B 34-0576 — — 1999-06 Twin Cam w/carb all
34-1010 — 34-0984 S&S Super E & G models, 2002-07 FLT-FXD,
34-1009 — — Mikuni HSR-40 smoothbore Twin Cam w/EFI
34-1195 — — Screamin’ Eagle Tapered 2002-15 FXST w/EFI
34-1040 — 34-1298 Screamin’ Eagle Round 34-0579 — — 1999-2001 Twin Cam FLT,
34-1066* — — As Above, Oblong FXST, FLST, FXD with EFI
34-1238 — — Screamin’ Eagle 34-0917 — — 1995-99 80” Evo with EFI
34-1239 — — Screamin’ Eagle — — 34-1068 1993-99 80” Evo
34-1070 — — Hyper Charger 34-1047 — — 1991-95 80” Evo
— 34-0973 34-0976 1990-92 80” Evo
Air Cleaner Mount Gaskets. 34-0958 — 34-0911 1986-89 80” Evo
James VT No. OEM Years 34-0955 34-0971 — 1984-85 80” Evo, not FLT
15-1146 15-0148 29058-77 1977-89 FXST, FLST, FXR *Note: OE Brand
15-1016 — As Above .062 thick
— 15-0285 29059-88 1988-up CV type Air Filter Oils and Cleaners. K&N type is for paper elements. Unifilter
15-0285 type for foam elements.
15-1147 — As Above Steel Core
15-1148 — As Above Adhesive Coated VT No. Size Item
15-0596 — 29095-95 1995-00 Injector 41-0171 12oz K&N Cleaner
15-1199 — 29062-95B 1995-up Carburetor 41-0172 6.5oz K&N Oil
15-1390 15-1527 29583-01A 2001-07 Carburetor 41-0173 16oz Unifilter Cleaner
— 15-1568 29645-08 2008-up EFI 41-0174 5.5oz Unifilter Oil
382
Air Cleaner Mount
Sifton
BIG TWIN
Carburetor
Bracket
34-1510
No Hoses
Needed!
34-1519 34-1179
34-1185
34-0445
34-0662
34-0661 34-0662 Installed
34-0705 34-0705
Installed
34-1369
Chrome Billet Support Brackets allow crankcase to breathe
back into the carb or throttle body so no external hoses are
Air Cleaner Adapters required.
34-0713
• Will mount any CV carbure- For use on 1993-98 Evolution and 1999-17 Twin Cam models.
tor air cleaner to performance Allow use of CV on S&S “E” bolt pattern air cleaners or velocity
aftermarket carburetor kits. stacks to be installed on models listed.
• Simply order any CV air 1993-15 FXST, FLST with carb or EFI, 1993-07 FLT w/carb or
cleaner and appropriate adapt- EFI and 1993-17 FXD with carb or EFI. For use w/CV on S &S
er flange for bolt on installation. "E" type air cleaner or velocity stacks.
34-0661
Adapter Flange 1993-15 FXST-FLST with carb or EFI, 1993-07 FLT with carb
or EFI, 1993-17 FXD with carb or EFI for use with CV or
34-0619 34-0834 S&S "E" type air cleaners or velocity stack to be installed
in horizontal or vertical position.
34-0673 34-1519 1993-17 includes Evo & Twin Cam bolts
34-0713 1999-17 includes TC breather bolts only
1999-15 FXST-FLST with carb or EFI, 1999-07 FLT with
carb or EFI, 1999-17 FXD with carb or EFI. Allows the
Air Cleaner Adapter Plate will adapt any CV style 3-bolt air installation of CV type air cleaners.
cleaner to the Mikuni, Keihin or S&S E&G as noted. 34-0705
VT No. To: Size 2008-16 FLT, 2016-17 FXST-FLST with 50 mm throttle body.
34-0673 S&S E&G 34-1369
34-0619 Keihin 38mm 1993-06 Big Twin with S&S Super "E" or "G" carb and air
34-0834 CV to Mikuni 42 and 45mm cleaner.
Air Cleaner Spacer is .560” thick and will 34-1179
allow installation of stock S&S air cleaner on 1993-06 Big Twin with S&S Super "E" or "G" carb allows
34-1185 integral mount bracket. installation of CV.
VT No. 34-1526 34-0662
1993-06 Big Twin with S&S Super "E" or "G" carb allows
installation of CV type. Air cleaners or velocity stacks to be
installed in vertical or horizontal position
34-1326 34-1327 34-1510
34-1185
Air Cleaner Adapters allow installation of Dragton II air cleaner 1993-06 Big Twin with Mikuni HSR42/45/48 carbs with
to models listed. Plain machine finish. Mikuni or CV air cleaner or velocity stack
VT No. Fits 34-0445
34-1326 2008-14 FLHT, FLHX, FLR FLTR and FL Trike Replacement Bolts for Above Brackets.
34-1327 2001-14 w/Delphi EFI except 2008-14 Dressers & Trike 35-0791 Bolt Set Evolution
34-0278 1993-up FX 35-0792 Bolt Set Twin Cam
383
Breather Kit
31-0430
35-0126
A
35-0123
Sifton Braided Hose Crankcase Breather Kit includes ³⁄₈”
inner diameter stainless steel braided hose, breather filter (with
mounting stud) and hardware. Air cleaner and carburetor sup-
35-9254 port bracket must be purchased separately. Fits 1993-17 Big
Twin custom applications only.
35-0732
VT No. Item
35-0123 Kit
40-0570 Breather
35-0572 35-0670 35-0731 35-0126 Bolt Kit
Air Cleaner Breather Manifold Kits to fit custom air clean- “Y” Breather Kit includes fittings to fit Twin
ers to engines with the internal breathing system. Kit includes Cam with breather. Drill and tap frame to con-
chrome breather manifold, chrome banjo bolts, chrome air nect.
cleaner support brackets, gaskets and instructions. VT No. 35-0578 34-0750
VT No. Item Year/Fits
35-9254 Kit 1993-99 Big Twin Round
31-0430 Kit 1993-15 FXST, FLST, Billet Air Cleaner Mount Set will mount air cleaners with flat
1993-07 FLT, 1993-99 FXD backing plates to Evolution and Twin Cam models. Offset billet
35-0572 Kit As Above, Black mounts feature built in breather passage that feeds inside air
35-0670 Tube Only 1993-15 FXST, FLST, cleaner housing. Brackets can be rotated to proper position,
1993-07 FLT, 1993-up FXD then backing plate must be drilled to match. Threaded breather
35-0731 Pair Banjo Bolt only, 1992-99 Evolution nipples will fasten back plate to brackets.
35-0732 Pair Banjo Bolt only, 1999-07 Twin Cam VT No. Year Type
14-0975 For Above O-Ring 34-0750 1991-99 Evolution
Breather Washer Set fits 1993-17 Big Twin, 34-0751 2000-17 Twin Cam
1991-up XL models. Chrome Air Cleaner Support
VT No. 35-0755 Brackets are for installing the custom
31-4041 31-4191 31-0750
round or teardrop air cleaners. Fits
1984-92 Evolution Big Twin.
VT No. 31-3941
31-3962 35-0731 35-0732 34-0578
Chrome Air Cleaner Bracket for Evolution Big Twin mounts
to boss on engine heads to support custom air cleaners.
VT No. Year
31-4041 1984-89
31-4191 1984-89 with choke mount Breather Bolts fit 1993-17 Big Twin mod- 34-1507
31-3962 1990-92 CV els. 35-0578 has vent holes.
31-0750* 1993-15 FXST, FLST, 1983-07 FLT, 1993-17 FXD VT No. Year Type
*Note: To be used with breather kit. 35-0731 1992-98 Evo Hex
35-0732 1999-07 Twin Cam Hex
Sifton Mini-Breather Bolt Kit. Chrome breather 34-0578 1999-07 Twin Cam Nipple
cups have built in mount bolt for Big Twin models. 34-1509 2008-17 Twin Cam Nipple
VT No. Year 35-1706 1992-98 Evo NPT
40-0453 1992-99 Big Twin 34-1507 1999-07 Rubber 34-1509
40-0454 Twin Cam 34-1508 2008-17 Rubber
Extended Breather Bolts allow mount- 34-0098 Bolt Set, 1992-up 4 Pc Set
ing of air cleaner to breather bolt stand. Breather Bolt and Banjo Kit includes
Use with banjo set or cross line for bolts for both Evolution and Twin Cam
breather connection. applications and two banjos to accept ⁵⁄₁₆”
VT No. Type hose.
34-0500
35-0136 Twin Cam VT No. Item
35-0129 Evolution/XL 34-0500 Without tee
35-0144 Banjo Set 34-0808 With tee
34-1186 34-1186 Adapter 37-0985 Evolution Nylon Washers
Important Note: Some items on this page may be emission-related 34-0808 37-0986 Twin Cam Nylon Washers
parts subject to California or other emission control laws. Please
see note for important information regarding emission control reg- 37-0989 Twin Cam Alloy Washers
ulatory compliance and warranty information.
384
Chrome Mini Breather Set includes
tie wraps. Breather Canister
VT No. 40-0588
Breather and Bracket Kit
BIG TWIN
35-0122
40-0346 installed on 34-1174
Chrome Billet Canister Set includes bolts for Evolution and 35-0125
Twin Cam applications.
VT No. 40-0346
40-0446 40-0449 40-0450
Crankcase Breather and Bracket Kit allows installation of

Sifton Breather Canister features enclosed breather filter and aftermarket CV type air cleaner on models with CV carb or EFI
tube for attaching to breather cross over lines, which is held in system. Includes bracket, filter, hose and mounting hardware.
place by set screws. Bottom cover is removable for cleaning. VT No. Fits
VT No. Item 35-0122 1993-2015 FXST, FLST
40-0446 Canister 1993-17 FXD (Includes Evo bolts)
40-0449 Breather Tube Kit 35-0125 1999-15 FXST, FLST
40-0450 Tube Only 1999-17 FXD (Includes Twin Cam breather bolts only)
Chrome Billet Single Breather Canister fits 35-0698 2016-17 FXST, FLST
cross over metal tubes. Grind down ferrule on 40-0350 Filter for Above
end of cross tube to install. Sifton Dual Breather Kit
VT No. 40-0345 includes two canisters, banjo
tubes and bolts for Evolution
and Twin Cam applications.
Fits 1992-17 FXST, FLST, FXD
35-0441 Sifton Dual Vent Kit includes two and 1992-94 FXR.
vent canisters and banjo bolts for VT No. 40-0436
1992-17 Evo and Twin Cam mod-
Sifton Dual Canister Set includes
els with necessary fittings.
hardware for both Evolution and
VT No. 35-0441
Twin Cam models. Fits 1992-17
FXST, FLST, FXD and 1992-94
FXR.
Sifton Dual Breather Kit includes VT No. 40-0452
two canisters and banjo tubes with Breather Canister Kit for Twin Cam mod-
hardware for Evolution and Twin els. Fits 1999-17 FX-FL.
Cam. Fits 1992-17 FXST, FLST, VT No. 40-0892
FXD and 1992-94 FXR.
VT No. 40-0451
V-Twin Mfg. supplied components for every aftermar-

ket motorcycle company who sprung up due to the
shortage of Harley-Davidson motorcycles. Startups
included: • Confederate
• Big Dog (1994-2011) • Gilroy Indian Co. (1999-2003)
• Excelsior-Henderson • Orange County Choppers
• Ultra • California CMC (1993-97)
• American Iron Horse (1995-2008)
385
Breather Chrome Billet Crank Case Breather
includes ¹⁄₈” NPT fittings.
VT No. 40-0003
40-0434 40-0447 40-0381 40-0570 Chrome Crankcase

Vent clamps direct
Chrome Crankcase Breathers available to accept hose or ¹⁄₈” to ³⁄₈” breather hose.
NPT fitting. Unit comes with a ⁵⁄₁₆”
VT No. Type stud and nut or ¹⁄₄” x
40-0434 ³⁄₈” 20 threaded insert to
40-0447 ¹⁄₈” NPT mount from bracket.
40-0457 Chrome Vented Breather Canister Measures 2” diameter
accepts ¹⁄₈” NPT fittings, not included. x 1¹⁄₂” high.
VT No. Item VT No. Type
40-0457 Breather 40-0381 Stud, K&N
40-0449 Banjo Tube Kit 40-0570 Threaded
40-0450 Straight Tube Only
40-0246
40-0355 40-0354
40-0353 40-0352 40-0356 40-0357

Uni Filter Crankcase Breather is plastic construction with a zip tie Crankcase Breathers connect to breather hose when stock
loop for attachment and is washable for reuse. air cleaner has been replaced. Filters feature chrome tops with
VT No. Size VT No. Size washable elements. Bracket can be mounted to transmission
40-0355 ⁵⁄₁₆” 40-0353 ¹⁄₂” case. VT No. 40-0246 includes chrome bracket fastened to
40-0354 ³⁄₈” 40-0352 ⁵⁄₈” body by allen screws, hose fitting is ¹⁄₈” NPT threaded into body
Chrome Engine Breather Oil Collector and can be changed to 90° for special applications.
designed to collect the oil mist from breath- VT No. Type
er hose which eliminates engine oil from 40-0356 With bracket
collecting in air cleaner. Features a high 40-0357 Without bracket
flow air filter which acts as a internal oil baf- 40-0246 With bracket
fle allowing the oil and air to separate more
Sifton Universal
efficiently by promoting unrestricted breath-
Breather Vent
ing. The air filter can easily be cleaned. A
Canister is a one way
90° barbed fitting fits breather hoses per-
check valve; includes
fectly. On the bottom is a drain plug to allow
40-0595 line and clamps. Non
drainage on a regular basis. Measures 5
serviceable unit.
3/8” x 1¹⁄₂” and includes chrome mounting
VT No. 40-0445
clamp.
VT No. Item
40-0595 Complete Collector
40-0447 Replacement Filter 14-0925
Breather Oil Collector Can
includes chrome clamp.
Order filter separately.
40-0875
VT No. 40-0652
Crank Vent features replaceable umbrella valve available sep-
Heavy Breather Performance arately.
Air Cleaner Kit features VT No. Item
a black finish and includes 40-0875 Canister
high flow air cleaner element, 14-0925 Umbrella Valve (10)
intake tube, back plate, rain
sock and all mounting hard-
ware.
VT No. 34-0083
386
35-8018
Intake Manifold
1984-up
BIG TWIN
35-8035
35-0652 35-0161
Stock Intake Manifolds are of cast alloy spigot type as original.
35-0427 35-0428 VT No. OEM Fits
35-9169 27019-89 1990-99 Evo
35-0652 27613-99 1999-17 Twin Cam, except 1999-16 FLT
35-0161 Flange Kit
Manifold Flange Kits replace 27009-
86A and 27010-86A for Big Twin
Manifold Kit for Evolution Big Twin converts stock rubber com- 1340 1986-99.
pliance fittings to a more rigid mount system. Order flange seal VT No. Type
kit separately for S&S. 35-0427 Chrome with Seals & Screws
VT No. Item Brand 35-0428 Natural with Seals & Screws
35-8018* Manifold S&S 35-8027 Chrome Flange Set Only
35-8035 Manifold Kit VT 14-0165 Seal
35-0427 Flange Set, Chrome 14-0573 Blue Seal
35-0428 Flange Set, Natural
*Note: Use flange kit 35-0427 or 35-0428
44 mm CV Intake Manifold Flange
35-8012 Intake Manifold Coupler Kit Kit.
includes one each of 27008- VT No. 35-0161
83A and 27012-83A compli-
ance fittings with clamps. Fits
Evo. Intake Manifold Width Gauge
allows accurate measurements to
be taken between cylinder heads
VT No. OEM Item U/M to establish intake manifold width
35-8012 Kit Coupler Pair requirements. For use on all Evo
35-9137 9991A Clamps Pair engine models.
15-0263 29242-83 Gaskets 10 VT No. 16-0250
15-1018 29242-03 Gaskets (James) 10 Vacuum Line Plugs available in packs of 5. Fit
37-8962 3494 Stainless Steel Allen Screws 1995-up. VT No. 35-0384
14-0976 James Manifold Seal Kit to reseal
late model manifolds 1988-17.
VT No. Item 9930-14 Intake Manifold Chrome Allen
14-0976 1989-up with CV carb Mount Screw Kit fits 1986-99.
14-0690 2000-up with 44mm carb VT No. 9930-14
14-0691 1999-17 TC-88 with EFI
Tru Seal Manifold has

two machined manifold
halves which bolt together 15-0148
with stainless allen screws. Air Cleaner Mount Gaskets.
Does not require the use of James VT No. OEM Years
existing stock style O-rings 15-1146 15-0148 29058-77 1977-89 FXST, FLST, FXR
or seals. Evolution type 15-1016 — As Above .062 thick 15-0285
also includes front and rear — 15-0285 29059-88 1988-up CV type
head spigots, gaskets, seal- 15-1147 — As Above Steel Core
ing compound and instruc- 15-1148 — As Above Adhesive Coated
tions included. Fits 1985-98 15-0596 — 29095-95 1995-00 Injector
Evo Big Twin “G” models. 15-1199 — 29062-95B 1995-up Carburetor
VT No. 35-0075 15-1390 15-1527 29583-01A 2001-07 Carburetor
— 15-1568 29645-08 2008-17 EFI
— 15-0354 — For S&S
387
Intake Adapter 35-9136 35-0117 35-0194
35-9150
& Seal
CV Carburetor Adapter Flange is 2 bolt 35-4574 35-9162 35-9340
early style type without seal.
VT No. 35-9150
35-0098 35-0088
Carburetor Adapters.
VT No. Carb Size Type
15-0141
Manifold Spacer replaces 29250-78 on 1971-88 models. ³⁄₈” thick. 35-9136 36-45 mm Spigot Rubber
VT No. Item 35-0117 42 mm Spigot Rubber
15-0141 Stock Spacer, each 35-0194 40-44 mm Spigot Rubber
15-1019 As Above, James 35-4574 36-38 mm Flange Adapter
15-0142 Gaskets, Non-beaded 35-9162 42 mm Flange Adapter
15-1144 Gaskets, Beaded 35-9340 42 mm Flange Adapter
15-1019 Spacer Kit, James (1³⁄₄” inner diameter) Stock 35-0098 38 mm 2 Bolt Adapter with rubber
15-1162 Spacer Kit, James (1³⁄₁₆” inner diameter) Custom 35-0088 38 mm 2 Bolt Adapter
Carburetor Spacers for S&S are available in 1” or ³⁄₈”

thickness for spacing out 1⁷⁄₈” carburetors on models 14-0573
with 5 gallon tanks.
VT No. Size
35-0105 1”
35-0086 ³⁄₈” Intake Manifold O-Rings and Seals.
James VT No. OEM Type
Bendix 40 mm 14-0624 14-0165 26995-86A 1986-up
14-0573 — As Above Blue silicone
14-0678 — As Above Oversize
35-0024 14-0689 — As Above Rubber with metal element
Standard Size
14-0708 — As Above Rubber with extra thick metal
insert standard size
14-0625* 14-0180* 27002-89 1990-up Big Twin
— 14-0690 — 2000-up with electronic fuel
injection, 44mm
— 14-0691 — 1999-up TC-88
*Note: Seal for carburetor to intake manifold.
35-0053
Chrome Zenith 40mm Performance Spigot Mount

Carburetors Kit for all 1984-up Evo and Twin Cam models
with dual cable operation. Features adjustable main jet, butter-
fly type choke, spigot mounting and acceleration pump. Use 35-0030
stock type cables and air cleaner. Comes complete with all fit-
tings, adapters and instructions. Kits sold as shown. Dell’Orto Pumper features adjustable accelerator pump
and choke. Kit includes throttle assembly, cable, grips, air
VT No. 35-0024
cleaner adapter and carburetor adapter to fit stock 2 bolt or
Shovelhead manifolds on pre 1985 models.
VT No. Item Model
35-0030 38mm Complete Kit Shovelhead
35-0031 40mm Complete Kit Shovelhead
35-0053 38mm Complete Kit Panhead
35-0238 38mm Carburetor Only
34-1060
36-2550 Throttle Cable
Dell’Orto Pumper Air Cleaner Flat Adapter allows use of
Bendix air cleaners.
VT No. 34-1060
Important Note: Some items on this page may be Dell’Orto Spigot Carburetor
emission-related parts subject to California or other Adapter has O-Ring seal with
emission control laws. Please see note for important
information regarding emission control regulatory steel flange.
compliance and warranty information. VT No. 35-9076
388
Installed
CV Keihin
BIG TWIN
35-0681
35-9099
Enricher for CV Carburetors will eliminate choke cable. Unit
has three positions. 35-0571 35-0990
VT No. Item
35-0447 Enricher 1340 Reproduction CV Carburetor, Complete. 40mm.
35-9099 Jets Carb Carb with bracket Fits
35-0681 Bracket 35-0987 35-0571 FX
CV Tuners Kit by Kinetic-Karb is for 1989-99 Keihin con- 35-0990 Black
stant velocity carburetors to permit easy tuning after instal- 35-0707 35-0669
lation of custom air cleaners, cams and exhaust. Includes
instructions, three main jets, needle jet, adjustable needle Chrome Float Bowl Speed
with spacers and circlips, a spring and drill bits. This dual pur- Screws for all CV carburetors
pose kit fits 1989 models without accelerator pump and 1990- 40 and 44 mm carburetors. Set
99 with accelerator pump. Jet assortment includes #140-205, of four machined screws.
70 piece main jet assortment. 35-9075 VT No. 35-0259
VT No. Item
35-9075 Kit
35-9099 Jet Assortment
EZ Tuner Kits CV Carburetor Rebuild Kit includes seals,

O-Rings, diaphragm and vacuum piston.
VT No. 35-0465
35-0763
Choke Cable Assembly Kit includes
bracket and cable assembly to mount
to all CV carb tops. Top mount bracket
relocates the choke assembly cable,
includes the knob, casing and inner
35-0766 wire. Fits 1993-1994 FXR, 1993-06
FLT, FXST, 1991-2006 FXD,1993-
2006 FLST. VT No. 36-0809
35-6101 35-0363 CV Carburetor Upgrade use when installing
35-9075 CV tuners kit. VT No. 35-0363
35-6100
CV Jet Kits
EZ Quick Tuner Kits for CV carburetors. Kit includes brass 35-0540 Dynojet for stock carburetors work with
jets and instructions designed for specifically for each model mild cams, stock or aftermarket exhaust
listed. These kits feature no drilling installation and will work and stock or aftermarket air cleaner. Fits
on stock to heavily modified engines. Screamin' Eagle 44mm CV Twin Cam.
35-0766 1989-98 Big Twins VT No. D-J#
35-0763 1999-up Big Twins 35-0540 8132
CV Carb Tuner Kits
35-6100 1995-06 FXST Keihin Screw Kit includes chrome
35-6101 1999-06 FXST screws where required.
VT No. Years Type
35-0206 1976-89 Allen
37-9116 CV Allen
35-0259 Hex
389
CV Keihin Carb Keihin Carburetor Rebuilds
contain needle, proper o-rings
and diaphragm.
35-1972 35-1976 VT No. Year Brand
35-0200 1976-78 GB
35-0200 35-0240 1976-86 Keihin
35-0196 1983-89 GB
ThunderJet Accelerator Jet 35-0219 1976-86 James
& Accessories mounts in all 35-0416 1989-up CV GB
Bendix-Keihin, S&S, flowmaster, 35-0422 1988-up CV James
Deluxe Carburetor Kits include
Tillotson, and CV carburetors.
all pieces shown for 1976-89
Choke must be deleted for use.
Keihin carburetors.
Works on Venturi vacuum princi-
VT No. Type
ple as third jet. Extra jets included.
35-9172 Stock
VT No. Type 35-9176 Viton
35-9279
35-1972 ThunderJet Bendix Keihin, S&S E series 35-9279 Replica
35-1976 ThunderJet for CV. Carburetor
Keihin Carburetor 35-0130 Adjustable Idle
35-0179 ThunderJet for S&S G & D Carburetor
Fitting replaces Mixture Needles
Keihin Low Speed Jets fit 1976-89 Keihin car- 27371-76, 90°, provide adjustment
buretors, except CV. plastic, each. for Keihin carbure-
VT No. OEM MM VT No. 40-0534 tors. Fits CV type.
35-0297 27896-79 .65 VT No. 35-0130
35-0294 27894-78 .68
35-0296 27897-78 .72 Keihin Adjustable
35-0295 27382-77 .75 Main Jet. Full
35-0299 27348-77 .88 adjustability for
35-0298 27348-76 1.00 maximum tuning
Keihin Main Jets. Slow Jet Screw efficiency.
VT No. OEM MM Driver facilitates VT No. 35-0369
35-0357 27419-76 1.65 removal of Keihin
35-0358 27418-76 1.70 slow jets with no High Flow Fuel Inlet replac-
damage to jet. es broken fuel inlet to the
35-0359 27417-76 1.75
VT No. 16-0546
35-0361 27416-76 1.80 carburetor bowl for modi-
fied engines. Fits all Keihin
carburetors (Butterfly and
CV) 1976-up Shovelhead,
Evolution, TC-88.
VT No. 35-0134
Carburetor Mount Stud Set replaces
35-0230 29254-78. Fits 1978-89. Length is 1¹⁄₄”
VT No. 12-2110
Keihin Carburetor Parts and Accessories
VT No. # OEM Item
14-0921 A 27121-89 Float Valve O-ring 1989-up CV
35-0110 B 27311-76 Pump cap, 10 pack
14-0566 27312-76 Float Bowl Screw O-ring, 1976-77 Needle Jet Seat Cutter eliminates gaso-
13-9234 C 27314-76 Throttle Stop Screw Spring
14-0560 D 27324-83 Float bowl O-ring 1983-91 CV, 5 pk
line seepage from around the needle jet.
35-9067 E 27337-76 Float valve with clip 1976-82 Creates a smooth and concentric seat
27338-76 VT No. 16-0095
35-0230 F 27585-88 Vacuum Piston
14-0559 G 27358-76 Float bowl O-ring 1976-78
35-9066 I 27361-76 Pump diaphragm
35-0852 I 27361-76 Pump diaphragm (5 pack)
13-9168 27362-76 Diaphragm spring
14-0564 K 27577-88 Float bowl O-ring 1989-91 CV
14-0937 K 27577-92 Float bowl O-ring 1992-up CV
14-0557 L 27889-78 Float bowl O-ring 1978-82
14-0679 M 27385-76 Low Speed Jet Plug 1976-up
13-9212 27123-89 Accelerator Rod Spring 1989-up
13-9169 27136-81 Throttle and Idle Adj. Screw
Spring, 1981-up
13-0500 27136-90 Idle Screw Spring 1990-up
13-9213 27162-89 Vacuum Piston Spring, 1989-up
13-9179 27315-88 Primary Starter Spring, 1988-up
13-9181 27319-76 Low Speed Adjuster Screw
Spring, 1981-up
13-9183 27322-76 Throttle Lever Spring, 1981-up
13-9178 27584-88 Primary Vacuum Spring, 1988-up
35-9111 27886-78A Needle for CV 1983-up
35-9196 N 27576-92 Float 40 mm CV 1992-up
390
CV Carburetor Upgrade Kit
includes rebuild kit, vacuum
piston, screws and tuner kit, fits
CV Keihin Carb
BIG TWIN
1988-up Keihin CV carburetors.
VT No. Item
35-0459 Kit
35-0230 Slide
Extended Float Bowl Kit fits CV

carburetors for extra capacity, 35-8025 35-8029 35-8032
includes hi-flow inlet fitting.
Chrome CV Carburetor Top replaces black plastic cover on
VT No. 35-0135
1990-up Big Twin models.
VT No. Type
35-8025 Smooth
Choke Cable Assembly Kit includes 35-8029 Eagle Spirit
bracket and cable assembly to mount 35-8032 Ball Mill
to all CV carb tops. Top mount bracket
CV Carb
relocates the choke assembly cable,
Rebuild and
includes the knob, casing and inner
Hardware Kit.
wire. Fits 1993-1994 FXR, 1993-06
VT No.
FLT, FXST, 1991-2006 FXD,1993-
35-0612
2006 FLST.
VT No. 36-0809
Keihin and CV Idle
Carburetor Tuner Kit Main Jet Screw allows for easi-
35-9099 er adjustment by hand. 35-0220
Assortment for the Kinetic-Karb
Installed
tuner kit includes 5 of each jet VT No. 35-0220
from 1.40-2.05 in increments of CV Choke Cable Bracket will mount the
.05. VT No. 35-9099 knob assembly on top of carburetor for use
with air cleaners. VT No. 35-0681
35-0532
Installed 35-0532
Installed
Carburetor Choke Cable Polished Bracket
CV Main Jets for Keihin available in packs of 5. VT No. 35-0532
VT No. Size M/M CV Slow Jets 35-0416 35-0444
35-0451 1.40 VT No. Size M/M
35-0452 1.45 35-0380 .040
35-0453 1.50 35-0381 .042
35-0454 1.55 35-0338 .044
35-0375 1.60 35-0382 .045
35-0376 1.65 35-0339 .046
35-0377 1.70 35-0383 .048 CV Carburetor Rebuild Kit.
35-0378 1.75 35-0456 .050 VT No. Year
35-0334 1.80 35-0457 .052 35-0416 1988-91
35-0379 1.85 35-0458 .054 35-0444 1988-up
35-0335 1.90
35-0336 1.95
35-0337 2.00
Turbulator turns the intake manifold into
a violent mixing chamber. The heavier fuel
particles are directed away from the sides
of the intake manifold back to the center
of air flow. The fixed valve turbulator then
35-0859
tumbles the mixture resulting in higher
horsepower. Fits S&S G.
VT No. 35-0859
391
Shorty Carb
35-0994
35-0992 35-0991 35-0991

OKO Carburetor has 1⁷⁄₈” bore. Performance carburetor will accept S&S jets, and S&S bolt pattern air filter assemblies. This
shorty carburetor has a relocated accelerator pump nozzle for increased throttle response, and thunder jets bolt on type.
VT No. Finish
35-0992 Polished
35-0994 Black
35-0991 Natural
35-1012 Natural Kit 35-0850
35-0235
S&S ‘E’ Rebuild Kits & Replacement Parts. Rebuild kits

contain all the parts necessary for a complete overhaul.
VT No. Fits
35-0850 Super ‘E’ Body Kit VT
35-0966 Accelerator Rebuild Only, Super ‘E’ & ‘G’ V-Twin
35-9355 Sifton Super ‘E’ Rebuild
35-9189 Super ‘E’ Float VT
35-0849 360° Carburetor Fuel Inlet
15-0319 Float Bowl Gasket Only
35-0234 Needle and Seat Super ‘E’ & ‘G’
35-0970 Needle and Seat Super ‘E’
OKO Carb Shorty Kit fits 1993-07 FXD, FX, FLH. Kit includes
35-0978 Needle Only
a chrome billet carburetor bracket kit, which features an inte- 35-0924 Needle Seat with elbow
gral breather passage to air intake, and a natural OKO perfor- 35-0235 ¹⁄₄” Insulator Block, 1⁷⁄₈” Carburetors
mance shorty carburetor. Integral carburetor support includes 35-0258 ¹⁄₄” Insulator Block, 2¹⁄₁₆” Carburetors
breather bolts for Evolution and TC-88 models, 1/2" and 3/8" 35-0102 Intake Manifold, for all S&S B & E 1-7/8" Carb
sizes. Support bracket accepts all CV pattern air cleaners.
Note: Dual cable operation.
VT No. 35-0870
Black Thunderjet fits S&S G

and D carburetors for larger
volume.
VT No. 35-0179
Adjustable Main Jets for S&S (C) fits in
B
A float bowl drain plug below main metering
jet. The recommended main jet is 100 to
104. Fits Super ‘B’ only.
Polished Carburetor Air Intake Snoot constructed of cast
VT No. # Item
aluminum with a polished finish for S&S and shorty carburetor
35-9168 A Jet Tool Install/Remove
applications. Includes the carburetor air snoot door. *NOTE:
Jet on B & E carburetors
Carburetor will still require a support bracket or breather-bracket
35-0370 B Main Jet
combination. Fits1988-2006 XL and 1993-06 FX.
Super Allen Screw Sets include bowl air cleaner VT No. 34-1403
and cover screws in chrome. Fits Super E & G.
VT No. 37-9106
SU Carburetor Replacement Parts
VT No. Application
35-4555 8 oz piston return spring (silver)
35-4556 12 oz piston return spring (green)
392
35-1050
Super ‘E’
BIG TWIN
35-0471
34-1165 34-1177
S&S 1⁷⁄₈ Super ‘E’ feature adjustable volume pump, enrich-

ment device for ease of starting and a throttle spool assembly
Chrome Velocity Stack Kit includes stack, bracket and enrich- designed for late 2 cable operation. Supplied with tear drop air
er knob to fit S&S. cleaner, mounting bracket and black fuel line. Super ‘E’ carbure-
VT No. Type Size tor is approximately 1⁷⁄₁₆” shorter than the Super ‘B’ carb, making
34-1165 E & G 4”
installation length of the Super ‘E’ the same as stock. Can be
34-1177 B 2”-5”
used with 3.5 or 5.0 gallon Fatbob tanks. The 1⁷8” is for street
"E" Series Carburetor
Upgrade Kit. stock applications. Intake manifold clamps or flanges must be
VT No. 35-9191 purchased separately when they are required.
1⁷⁄₈ ‘E’ Fits
35-0004 1984-92 Big Twin Evo
35-9229 1993-98 Big Twin Evo
Hi-Flow Air Cleaner Element fits S&S E 35-0471 Carburetor Only, Natural
air cleaners. Kit includes washable 3.5” 35-1050 Carburetor Only, Black
high filter and mount studs. 2596-13 Allen Screw Kit
VT No. 34-0653
Accelerator Pump Adjusting Screw

Set allows adjustment of idle and
accelerator pump by these tee bar 34-0593
style screws for ease of adjustment.
VT No. 35-0217
Billet Velocity Stack fits 34-0662 bracket. Stack includes
inverted cone filter element.
VT No. Item
Throttle Cable Adapter 34-1179 Bracket
Block 34-0593 Kit
VT No. 36-0546
34-1166
Chrome Velocity Stack Kit includes bracket with integral
breather passages. Enricher knob included. Fits S&S E.
VT No. Model
34-1166 Evo and Twin Cam
393
Jets for S&S 35-0170
Enricher for S&S
Super E & G fea-
tures 3 positions.
35-0287
VT No. Type
35-0170 Pike
35-0170 35-0854 O-Ring
35-0854 Installed
35-0995 Sifton Enricher for S&S, fits Super ‘E’ & ‘G’ and ‘B’
Jet Assortment for S&S Super ‘E’, ‘G’ and ‘B’ carburetors. carburetors, includes chrome knob.
Complete kit includes 7 intermediate jets from .025" to .033" VT No. 35-0466
and a main jet kit only which includes 14 main jets from .062" to
.084". Enricher Assembly for S&S can be used on S&S
VT No. Kit Super ‘E’ & ‘G’ carburetors when a aftermarket air
35-0995 Complete cleaner or velocity stack is used. Does not require
35-0287 Main Only lever assembly. Features full on or full off operation
Main Jets for S&S. Use when installing new exhaust system only. VT No. 35-0152
or just tuning for better performance and mileage. Sizes avail- Brass Petcock for S&S “E” Carburetor bolts
able in increments of .002 and ranges in sizes from .040 to directly to bowl. Note: For use with ⁵⁄₁₆” fuel
.104. Sold each. line. Note: For use with ⁵⁄₁₆” fuel line.
VT No. Size VT No. Size VT No. Size VT No. 35-0935
35-0300 .040 35-0312 .062 35-0323 .084
35-0301 .042 35-0313 .064 35-0324 .086 Long Float Bowl Screws fit S&S ‘E’ carbu-
35-0302 .044 35-0314 .066 35-0325 .088 retors, to facilitate easy removal of bowl.
35-0304 .046 35-0315 .068 35-0326 .090 VT No. Finish
35-0305 .048 35-0316 .070 35-0327 .092 35-0025 Brass
35-0306 .050 35-0317 .072 35-0328 .094 35-0029 Chrome
35-0307 .052 35-0318 .074 35-0329 .096 Warning for California Users: This product may contain substances known to the State of
California to cause cancer and/or reproductive toxicity.
35-0308 .054 35-0319 .076 35-0330 .098
Fuel Line has a preformed bend which is kink resistant. Line
35-0309 .056 35-0320 .078 35-0331 .100
has 90° formed bend.
35-0310 .058 35-0321 .080 35-0332 .102
35-0322 .082 VT No. Type Size
Intermediate Jets fits all S&S carburetors. 35-0561 Clear 20” x ⁵⁄₁₆”
VT No. Size/No. VT No. Size/No. 35-0562 Black 20” x ⁵⁄₁₆”
35-0350 025 #1 35-9174 .032 Throttle Cable Brackets for S&S. These
35-9173 .0265 35-0354 .033 #4 brackets allow the use of stock type cable on
35-0351 .028 #2 35-0355 .036 #5 S&S “E” & “G” carburetors.
35-0352 .0295 #2 1/2 35-0356 .040 #6 VT No. Type Years
35-0353 .031 #3 35-0150 Short 1981-89
35-0850 35-0151 Long 1990-up
35-0235
Pingel® Power Flow Valve has a single out-
let with reserve. Manufactured as a one piece
35-9187 billet brass unit featuring a 6AN threaded fit-
ting for fuel line hook up using stainless steel
S&S Super ‘E’ & ‘G’ Rebuild Kits & Replacement Parts. hose and fittings, carburetor fitting for Super
Rebuild kits contain all the parts necessary for a complete over- ‘E’ & ‘G’ sold separately.
haul. VT No. Item
VT No. Fits 35-0420 Petcock
35-0850 Super ‘E’ Body Kit VT 35-0421 S&S Carburetor Fitting
35-9185 Super ‘E’ Body Rebuild S&S
35-9186 Super ‘G’ Body Rebuild Throttle Cable Adapter Block
35-0966 Accelerator Rebuild Only, Super ‘E’ & ‘G’ V-Twin allows use of stock 1996-up
35-9187 Accelerator Rebuild Only, Super ‘E’ & ‘G’ S&S throttle cables on S&S E carbu-
35-9240 Super ‘E’ Master Rebuild retors. VT No. 36-0541
35-9355 Sifton Super ‘E’ Rebuild
35-9183 Super ‘E’ Float for Above 36-0541
35-9189 Super ‘E’ Float VT 36-0541 Installed
35-0849 360° Carburetor Fuel Inlet 35-9355
15-0319 Float Bowl Gasket Only, Super ‘E’ & ‘G’ each
35-0234 Needle and Seat Super ‘E’ & ‘G’
35-0970 Needle and Seat Super ‘E’
35-0978 Needle Only
35-0924 Needle Seat with elbow
35-0235 ¹⁄₄” Insulator Block, 1⁷⁄₈” Carburetors
35-0258 ¹⁄₄” Insulator Block, 2¹⁄₁₆” Carburetors
35-2388 Replacement Float Bowl Super ‘E’ & ‘G’
35-0102 Intake Manifold, for all S&S B & E 1-7/8" Carb
394
Mikuni HSR42/45 Total Kit for
Big Twins. These kits are com-
plete with all required parts for
Mikuni Carburetor
35-9315 35-9319
BIG TWIN
installation. Kits include HSR
42mm or 45 mm carburetor,
intake manifold, rubber flange,
K&N filter, chrome cover, breath-
er kit and mounting hardware.
Models from 1990-up use stock
throttle/idle cables and 1984-89
35-9342 models require 1990-up cables.
HSR42mm Mikuni HSR 42 Carburetor Easy Kits for all Evo and Twin
35-9327 1999-up Twin Cam Cam Big Twins. Partial kit includes carburetor, air box adapter
HSR45mm and instructions.
35-9324 1999-up Twin Cam
VT No. Fits Note
35-9322 Rebuild Kit
35-9315 1996-99 Evo Big Twin Uses stock choke
(42 and 45 mm)
cable, manifold and air
35-9342 OKO (42 mm)
cleaner. Comes with
chrome cover
35-9319 1999-06 Twin Cam Uses stock air cleaner,
Carburetor Rebuild Kit for choke cable and manifold
Mikuni carburetor includes
Air Cleaner Adapter Plate will adapt any
flow fuel hose, throttle valve
CV style 3-bolt air cleaner to the Mikuni as
seal, float bowl seal o-ring,
noted. Fits 42 and 45 mm CV.
and carburetor top gasket.
VT No. 34-0834
Custom application for HSR-
35-0821 42/HSR-45 carburetors.
VT No. 35-0821
HSR-42 Velocity Stack Kit
includes chrome bracket, 35-9344
35-9342
stack and adapter ring.
VT No. 34-1101 OKO Flat Side Carbs
35-9347 42 mm Black
35-9349 42 mm Polish
35-9342 42 mm Natural
Sifton HSR42/45 Idle Speed Knob features stainless 35-9344 45 mm Natural
construction with knurls for hand adjustment. 34-0445 34-0460
VT No. 35-0543
Chrome Billet Carburetor Bracket features integral breather,
Mikuni HS and HSR Jets includes flange ring, and accepts CV style air cleaners.
VT No. Item
34-0445 Kit
Jets.
34-0460 Kit
Pilot Jets Main Jets 35-0800 34-1261 Flange Ring
VT No. Size 35-0806 150.0 Chrome Float Bowl Speed Screws fit all
35-0800 22.5 35-0807 152.5 Mikuni HSR 42, 45 and 48mm carburetors.
35-0801 25.0
35-0806 Set of four machined stainless screws.
35-0802 27.5
VT No. 35-0259
35-0803 30.0
35-0805 35.0 34-0852
HSR-42 HSR-45
Jet Needles Jet Needles
35-0815
VT No. Size VT No. Size
35-0815 95 35-0818 95
35-0816 96 35-0819 96 31-0686
35-0817 97 35-0818
Chrome Carburetor Support Bracket fits HS 40/42 for 1984-
99 Evo Big Twin.
VT No. Item
34-0852 Bracket with Breather Unit 92-99
395
York Throttle Cable Sets
36-0131
Throttle/Idle Cables 36-0128

Clear Coated Throttle/Idle Cable Set
VT No. Length Over Application
36-0855 38” Stock 1981-99 FX-XL-FL
36-0868 46” +8” 1981-99 FX-XL-FL
36-0856 34” Stock 1990-95 90 FXST/FLST, 90-95 FXSTC/FLSTC/FLSTF,
1995 FXSTSB, 93-95 FLSTN, 91 FXDB, 90-94 FXLR/FXR, 90-92 FXRS/FXRT, 90-93 FXRS-
Conv. FXRS S.E.
36-0866 36” +8” 1990-95 90 FXST/FLST, 90-95 FXSTC/FLSTC/FLSTF,
1995 FXSTSB, 93-95 FLSTN, 91 FXDB, 90-94 FXLR/FXR, 90-92 FXRS/FXRT, 90-93 FXRS-
Conv. FXRS S.E.
36-0857 34.25” Stock 1996-17 FXD, 02-17 FXDI, 99-17 FXDX, 02-17 FXDXI, 01-17 FXDXT, 96-17 FXDL, 01-17 FXDLI,
96-17 FXDS Conv., 96-17 FXDWG, 01-17 FXDWGI, 96-up FXST, FLST, 96-up FLT
36-0128 42.25” +8” 1996-17 FXD, 02-17 FXDI, 99-17 FXDX, 02-17 FXDXI, 01-17 FXDXT, 96-17 FXDL, 01-17 FXDLI,
36-0119 47” 1996-up FXST, FLST, 1996-17 FXD, 1996-07 FLT
36-0131 52” +12” 1996-17 FXD, 02-17 FXDI, 99-17 FXDX, 02-17 FXDXI, 01-17 FXDXT, 96-17 FXDL, 01-17 FXDLI,
For Models with S&S Super "E" or "G" Carb
36-0114 42” 1982-95 FX-FXST-FLST
36-0115 54” 1982-95 FXST-FLST
36-0129 38” 1996-up FXST-FLST
36-0135 44” 1996-up FXST-FLST-FXD
36-0101
36-0902
Big Twin Throttle/Idle Cables are available in black vinyl or

36-0858 36-2561 braided stainless covering with correct end fitting for each appli-
Black Matched Stock and Idle Cable Sets for Big Twin cation, also available in over stock length. Assemblies unless
include correct throttle and idle cable assembly. noted.
Stock +8” +12” Years Model V-Twin V-Twin OEM Fits
36-0858 36-0861 — 1996-up Softail, FXD, FLT Stainless Black
36-0859 36-0862 — 1990-95 Softail, FXD, FLT 36-0903 36-0101 56324-81 Stock 1981-89 FX-FLH-
36-0860 36-0863 36-2561 1981-89 Softail, FLH FXST-FLST Throttle
36-0902 36-0100 56323-81 As Above, Stock Idle
Internal Throttle Internal Throttle/Clutch Unit features
ball and needle bearing construction
Wyatt Internal Throttle 36-0789 with built in return spring.
Sleeve. Custom design
VT No. Type Item
allows pull action of throt-
36-0789 Clutch Assembly
tle cable for use with billet
36-0591 Bearing ³⁄₈ x ⁷⁄₈ x ⁹⁄₃₂
grips.
VT No. 36-0570
1. Cut 2³⁄₈” off end of handlebar. Remove end of throttle handle that would attach to throttle
cables.
2. Mark handlebar for inner throttle sleeve. Drill a hole for the set screw, this will hold throttle
on the handlebar. 35-0276 35-0278
3. Remove set screw from the outer sleeve of spiral. Slide grip on and mark end of grip on Twist Grip Kit with cables features the push-pull type for
the handlebar. Measure from this mark back to set screw in outer sleeve. This measurement Keihin butterfly and CV type carburetors. Includes 2 stock
will be used to mark and drill the throttle grip. Once drilled install grip. Use a small amount of length black cables and twist throttle and grip set.
Loctite® on set screw for final installation.
VT No. Year Models
4. Note: Set Screw (A) should not be tightened so as to make contact with handlebar as it 35-0276 1981-89 FX-XL
will prevent throttle from turning. 35-0278 1990-96 FX-FL-XL
396 35-0277 1996-04 FX-XL
35-9246 Throttle Cable Kit
36-0791
BIG TWIN
36-0790
Throttle and Cable Kits include grips, throttle idle and Barnett
throttle cable with ends attached as pictured for S&S ‘E’ and ‘G’
carburetors.
VT No. Item
35-9246 38” Complete Kit
35-0212 Handle and Grips only 35-9871
S&S Super ‘E’ & ‘G’ and Cables for Dual Stock Type Throttle
Handles.
Throttle By Wire
Stainless Black Length Type Years
35-9871 Throttle by Wire Replacement Tube Only
— 36-2464 33” Throttle 1981-95
36-0790 Throttle Assembly 2008-15
— 36-2466 33” Idle 1981-95
36-0791 Throttle Assembly 2016-up
— 36-0744 33” Throttle 1996-up
36-0745 36-0746 33” Idle 1996-up 35-9073 28-1981 35-9870
— 36-2545 38” Throttle 1981-95
— 36-2544 38” Idle 1981-95
— 36-0732 38” Throttle 1996-up
36-0733 36-0734 38” Idle 1996-up Nylon Throttle Tubes.
VT No. Type Year
35-0253 35-0254 35-9073 Single 1976-81
28-1981 Dual 1982-95
35-9870 Dual 1996-17
Chrome Throttle Clamps and Tube Set feature smooth

design, upper and lower pieces with screws and nylon throttle
tube, for single or dual cable applications. For use with 1982-up
type cables. 35-0212 35-0237
VT No. Type
35-0253 Single 35-9352
35-0254 Dual Dual 1981-95 (Push-Pull)
VT No. Item
35-0237 Kit with grips
35-0212** Kit with grips
35-9352** Kit with Barnett cables
36-0151 35-0856 35-0857 35-0858 35-9350 Kit with Barnett cables
35-9149* 56324-81A Throttle only
35-9218 56396-74 All Friction Spring
*Note: Includes nylon tube with chrome clamps.
**Note: Includes chrome end plugs.
35-0865 35-0255 36-0564 35-0071 35-0214 C
Throttle Housing custom design for single cable operation. A
Single Dual Finish
36-0151 Chrome
35-0856 Black Vintage
35-0857 Chrome Vintage
35-0858 Copper Vintage Universal Throttle Sets feature chrome or black housing with
35-0865 Cable Black adjuster and metal twist tube. All use universal single cable.
35-0255 Accepts a 1982-1995 throttle cable VT No. # Item
36-0564 Chrome Dual Cable Throttle housing is 1” 35-0071 A 1” with Anderson Rubber Grips, Chrome
with 1/4-20" thread, and is for use with idle and throttle cable. 35-0266 1” with Anderson Rubber Grips, Black
35-0232 As Above without Grips
28-0116 Grips for Above
28-0215 Barnett Left Side Grip
35-0214 C ⁷⁄₈” with Plastic Grips and Cable
36-0104 Cable Only, Barrel End only, 48” overall
36-0112 Cable Only, Barrel End, 60”
36-2538 Handle Ferrule with nut
397
Stainless Steel Braided
York Clutch Cable
36-0519 36-8049 36-0558 36-0559 36-0560
36-8048
36-8075
36-0561 36-0556 36-0557 36-8054

36-8062
36-8076
36-0518
Full Stainless Braid

Covering with Clear Coat
Cables are constructed with the SupraTM stainless
36-8062 steel braid which is tightly woven for a bright, qual-
ity consistent finish. The clear coat is UV resistant,
heat bonded, non-yellowing grade for a long ser-
vice life. All applications include the correct fittings,
adjuster and inner lengths for an exact installation
and fit.
Clutch Cables feature heavy duty construction designed for reliability and longer service. By V-Twin in black vinyl or braided stainless covering. Big Twin Clutch
assemblied.
Braided
Black Length Over OEM# Application
Stainless
36-8049 52.56” Stock 38618-68C 1984-85 FXST, 1980-86 FXWG
36-8048 36-8090 62.69” Stock 38607-87A 1984-99 FXST, 1980-86 FXWG, 1987-99 FLSTC, 1987-99 FLST, 1990-99 FLSTF, 1993-96 FLSTN, 1997-99 FLSTS
36-0558 65.25” +2” 38607-87 As Above

36-0559 36-8091 66.50” +4” 38607-87 As Above
36-0560 36-8092 69.25” +6” 38607-87 As Above
36-0518 75 5/8” +8” 38607-87 As Above
36-0561 36-8093 74.50” +10” 38607-87 As Above
36-0556 36-2537 75.25” +12” 38607-87 As Above
36-0557 36-8094 79” +16” 38607-87 As Above
36-8062 36-8095 64.69” Stock 38666-00 2000-05 FXST/FXSTI/FXSTS/FXSTSI/FLSTC/FLSTCI/FLSTF/FLSTFI/FLSTS/FLSTSI/FXD/FXDX/FXDXT, 01-03
FXDWG2/3, 01-05 FXDL
36-8076 70.69” +6” 38666-00 As Above
36-8063 57.69” Stock 38665-00 1999-05 FXSTB/FXSTBI
36-8096 72.8” Stock 38789-06A 2006-up FXDWG
36-0864 36-1151 68.81” Stock 38789-06A 2006-up FXDWG
36-0867 72.81” +4" 38789-06 2006-up FXDWG
36-0865 36-1152 64.75 Stock 38666-07 2007-up FXST
36-1156 36-1153 62.66” Stock 38664-07 2007-up FXSTD
36-1158 36-1154 64.57” Stock 38787-06A 2006-up FXD
36-1159 36-1155 65.66” Stock 38788-06A 2006-up FXDL
36-2514 64.75” Stock 38606-87 1987-94 FXR-FXRS-FXRT
36-8054 53.31” Stock 38599-83A 1983-86 FXR/FXRS/FXRT, 85-86 FXRS S.E., 85 FXRC, 86 FXRD. 84 FXRDG
36-8055 60.63” Stock 36753-87A 1987-94 FXLR
36-8056 57.63” Stock 36755-87A 1987-93 FXRS S.R.
36-8097 68.69” Stock 38602-92 1995-99 FXD, 1993-05 FXDL, 1994-00 FXDS Conv., 1993-05 FXDWG
38661-00 1992-05 FXDB/FXDC
36-8067 36-8098 72.69” +4” As Above
36-8068 74.69” +6” As Above
36-8069 36-8099 76.69” +8” As Above
36-8070 78.69” +10” As Above
36-8058 55.44” Stock 38599-80B 1982 FXR/FXRS
36-8060 60.69” Stock 38617-95 1995-97 FXSTSB
36-8075 66.69” +6” 1995-97 FXSTSB
Clutch Cables feature heavy duty construction designed for

reliability and longer service. By V-Twin or Barnett in black
vinyl or braided stainless covering. *Note: Uses eyelet style Big Twin Clutch Cable Assemblies
end. Hand lever pin is supplied. V-Twin OEM Fits Casing
Black Length
36-1150 36-2537 — 1987-2007 75.25”
36-1150 38667-07 Stock 2007-up FLT 62.51”
36-1151 38789-06A Stock 2006-up FXDWG 68.81”
36-2537 36-1152 38666-07 Stock 2007-up FXST 64.75”
36-1153 38664-07 Stock 2007-up FXSTD 62.66”
36-1154 38787-06A Stock 2006-up FXD 64.57”
36-1155 38788-06A Stock 2006-up FXDL 65.66”
398
Black Stainless Stainless
with clear
coat
Clutch Cable
BIG TWIN
36-2365 36-1533 36-2363
36-2362
36-2337
36-0536
36-2366 Clutch Cables

Barnett
Stainless
Barnett Barnett Casing
with OEM Fits
Stainless Black Length
Clear
Coat
— 36-1530 36-2362 38599-83A Stock 1984-86 FXRS-FXRT-FXR 54”
— 36-0694 36-2363 38605-86A Stock 1986 FXST 5 Speed 54.25”
— — 36-2364 38611-86 Stock 1986 FLST 5 Speed 48.75”
— 36-0696 36-2365 38606-87 Stock 1987-94 FXR-FXRS-FXRT 64.75”
— 36-1531 36-2366 38607-87 Stock 1987-06 FLT-FXST-FXSTC-FLST 63”
— 36-1532 36-2369 — 8 Extension, As Above 71.375”
36-0759
— 36-0699* — 36753-87 Stock 1988-94 FXLR 61.875
— — 36-2488* 36755-87A Stock 1987-94 FXRSE 57.75
— — 36-2509 38601-89 Stock 1989-06 FLT 63”
— 36-0536 36-0535 38602-92 Stock 1992-05 FXDL-FXDWG-FXDB 69”
— — 36-0538 38617-95 Stock 1995-97 FXSTSB 60.75”
36-0758 — 36-0759 38647-98 Stock 1998-06 FXSTSB 57”
Throttle Cable
Throttle Cables
Barnett
Barnett Barnett
Stainless OEM Fits
Stainless Black
Clear Coat
— 36-1504 36-2464 56324-81 Stock 1981-89 FX-FLH-FXST-FLST Throttle
— 36-1505 36-2465 — +8” Extension As Above
— 36-1506 36-2466 56323-81 As Above, Stock Idle
— — 36-2467 — +8” Extension As Above
— — 36-2468 56328-81 Stock 1981-89 FLT-FLHT Throttle
— — 36-2469 56327-81 As Above, Stock Idle Cable Stainless Clear Coat
— 36-0639 — 56336-83 Stock 1983-87 FXRT-FXLR-FXRSE,Throttle
— — 36-2546 56343-88 Stock, 1988-89 FXLR Throttle
— — 36-2499 56306-88 Stock 1988-89 FXSTS Throttle
— 36-1508 36-2501 56306-90 Stock 1990-95 FXSTS Throttle
— 36-1510 36-0756 56306-96 Stock 1996-up FXSTS Throttle
— — 36-0757 56305-96 As Above Stock Idle Stainless
— — 36-2503 56327-90 Stock 1990-95 FLT-FLHT-FLHS Throttle
— 36-0650 36-2504 56328-90 As Above, Stock Idle Cable
— 36-1512 36-2505 56343-90 Stock 1990-95 FXLR-FXRS-FXRT-FLST-FXR-FXST
36-0708 — 36-0709 56328-96 As Above, Stock Idle
— 36-1516 36-0717 56343-96 Stock 1996-up FLST-FXD-FXDWG-FXST Throttle
— — 36-0718 — +8” Extension As Above
— 36-1518 36-0720 56342-96 As Above Stock Idle Black
— — 36-0766 56343-01 Stock 2001-up FLST, FXD, FXST Throttle
— 36-1572 36-0768 56342-01 Stock As Above Idle
399
Conversion 36-0790 36-0791
Throttle Cable
Electronic Throttle Assembly

with gear and wire for Touring
Barnett Carburetor Conversion Throttle/Idle Cables. Order models with “TBW” throttle by
by carburetor and throttle type. For use with stock type Push- wire.
Pull Throttle handles except as noted.
Mikuni Carb, 38 and 40mm VT No. Item Fits
Stainless Stainless Black Length Cable 36-0790 Throttle Assy 2008-15
w/Clear 35-9871 36-0791 Throttle Assy 2016-up
Coat 35-9871 Repl. Tube
— 36-1542 36-2493 38” Throttle Unv.,
Single
— 36-1543 36-2494 46” Throttle Unv., Clear
Single
— — 36-2541 43” Throttle 81-95 Coated
Single
Mikuni HS40 Barnett Clear Coat Braided Stainless Throttle Cable Sets
— 36-1546 36-2543 41” Throttle 1981-95 include throttle and idle cable.
— 36-1547 36-2542 41” Idle 1981-95 VT No. Year Model Length
— 36-1548 36-0728 41” Throttle 1996-up
— 36-1549 36-0730 41” Idle 1996-up 36-0823 1996-99 FXST, FLST, FXD Stock
Mikuni HS 42/45 36-0847 +8” As Above +8”
— — 36-2585 36” Throttle 1981-95 36-0832 1981-95 S&S Super E,G, Screamin’ Eagle 38”
36-1551 36-2586 37” Idle 1981-95 36-0829 1996-up S&S Super E,G, Screamin’ Eagle 38”
— 36-1553 36-0751 37” Idle 1996-up 36-0830 1981-95 S&S Super E,G, Screamin’ Eagle 42”
Keihin
— 36-1554 36-2477 38” Throttle Unv., 36-0831 1996-up S&S Super E,G, Screamin’ Eagle 42”
Single 36-0832 1981-89 FX, FLH, FXST, FLST Stock
— 36-1555 — 46” Throttle Unv., 36-0833 As Above + 8”
Single 36-0839 1996-up FXSTS (38”casing) Stock
S&S Super ‘B’ or Bendix 36-0841 1990-95 FXLR, FXRS,FXRT, FLST, FXR, Stock
— 36-1556 — 37” Throttle 1976-80 FXST, FXSTC, FLST, FLSTC
— 36-1557 — 38” Throttle 1981-95 36-0842 As Above +8”
Choke
— 36-1558 36-2498 38” Idle 1981-95
36-0723 36-1559 36-0724 38” Throttle 1996-up
36-0725 36-1560 36-0726 38” Idle 1996-up
S&S Super ‘E’ & ‘G’ and Screamin’ Eagle 37-8942
— 36-1563 36-2545 44” Throttle 1981-95 36-2555
— 36-1564 36-2544 44” Idle 1981-95
— 36-1565 36-0732 44” Throttle 1996-up 36-0597
36-0733 36-1566 36-0734 44” Idle 1996-up FLH-FXST-FLT Choke Cable. Assemblies include knob casing
Dell’Orto Pumper and inner wire.
36-0670 — 36-2550 40” Throttle Unv, Single
Dell’Orto Dual Throat VT No. OEM Item Fits
— — 36-2582 39” Idle 1981-95 36-0523 29213-79 Assembly 1984-89 FXST
36-0735 — 36-0736 39” Throttle 1996-up 29211-86 1985-86 FXWG
36-0737 — 36-0738 39” Idle 1996-up 36-2555 29229-88C Assembly 1993-06 FLT-FXST
Qwiksilver
36-0673 — 36-0740 39” Throttle 1996-up 36-0995 29214-71 Chrome Knob 1971-89 FLH-FXST
36-0674 — 36-0742 39” Idle 1996-up 28-2117 27451-82 Rubber
Universal Throttle Cables by V-Twin Grommet 1982-89 FLH-FXST
36-0905 — — 411/2” Ball and Barrel Ends 12-0576 27450-82 Nut 1982-89 FLH-FXST
— — 36-0104 43” Barrel End 37-8942 Kit Nut 1984-99 FXST
— — 36-0112 60” Barrel End FXST-FLT Complete Choke
— — 36-0105 38” 38mm Mikuni Ball
Cable Assembly for 1993-2006
End
models. Includes cable, cable
guide, sealing cap, starter valve,
starter cap and enrichment
Chrome Choke Knob fits 1989-up CV Big Twin spring. VT No. 36-0597
model carburetors.
VT No. 36-0551 FXD-FXR Choke Cable Assembly
for 1993-94 FXR, 1991-05
Dynaglide, replaces 29229-88C.
VT No. 36-2555
400
Cable Throttle Cable Adapter Kit is used when fitting
Throttle Idle Clips, Cable Retaining Clips
BIG TWIN
& Ferrules. Sold in 10 pack. pre1990 Edelbrock Qwiksilver carburetor on 1990-98
Big Twin with stock throttle cables. Use on 1996-up
S&S series carburetor to allow use of stock cables.
VT No. # OEM Item Year VT No. 36-0542
36-0527 A 11272 Throttle Cable Clip 1996-up Braided Cable Heat Shrink Tubing. Clear heat
36-0528 B 11271 Idle Cable Clip 1996-up shrink tubing for use on all braided stainless steel
36-2480 C 56508-76 Throttle/Idle Ferrules 1976-up cables to prevent cable from scratching painted
36-0579 or chromed surfaces while still keeping that braid-
ed steel look. Kit contains 4-16” long heat shrink
tubes to cover 2 throttle cables, 1 clutch and 1
36-0578 speedometer cable. Bulk tubing is in a 10 foot roll.
Chrome Clutch Cable Adjuster Cover fits 1987-up Big VT No. Item
Twin. Installs over adjuster at clutch adjustment cover. Locks 40-0015 Cable Sleeve Kit
in place with stainless steel set screw. Will retro fit Barnett or 40-0019 3/8” x 10’ Roll
stock cables. 40-0021 3/4” x 10’ Roll
VT No. Type Style Cable Clamp is fitted to hand lever for emer-
36-0578 1982-up Upper gency or permanent use. Easy to install .460”
36-0579 1987-06 Lower diameter, pair.
VT No. 26-0509
26-2130 26-2132
36-2559 Chrome and Billet Clamp 31-9943
Lever Pins/Bushings
VT No. OEM Item U/M
26-2130 45032-82 Pin 1982-84 10
26-2132* 45036-88 1988-up with Bushings Each
37-9396
36-2559 45423-92 Lever Bushings 10
*Note: Veloprene coated pin fits 1988-up eyelet clutch cables
31-9942 36-0588 Chrome Dual Throttle Cable 37-9359 37-8913
Separator is two clamp piece 37-8915
design. 2-holes.
31-9942 Oval 31-1010
36-0588 Maltese Chrome Cable Clamps are 2-piece design for securing
Chrome Billet Clutch Cable Mount fits cables or wires to frame and forks. Sold each. As noted for
Softail models. VT No. 31-0945 cable type.
Chrome Stock Billet Brake Clip. VT No. Size Holes Type
Replaces 91336-03. Fits FXST. 37-9119 1” 2 Throttle
36-0351 VT No. 36-0351 31-9943 1” Slot Throttle (2)
37-0887 Chrome Billet Cable Clamps 37-8976 1¹⁄₄” Slot Throttle (2)
sold each. 37-9501 1¹⁄₂” Slot Throttle (2)
VT No. Size Type 37-9502 1³⁄₄” Slot Throttle (2)
37-0883 1” Throttle, Single 37-9503 2” Slot Throttle (2)
37-0883
37-0887 41mm Clutch 37-9396 1¹⁄₄” 2 Throttle (2)
37-0897 39mm Clutch 37-9398 1¹⁄₄” 1 Throttle
37-8911 1” 1 Clutch
31-0315 31-0316 37-8915 1¹⁄₈” 1 Clutch
37-9359 1¹⁄₄” 1 Clutch
37-8913 35mm (1³⁄₈”) 1 Clutch
41mm Push On Fork Tube Clamps to secure speedometer cables 37-8914 39mm 1 Speedometer
and brake lines. 37-9341 41mm 1 Speedometer
VT No. Style 31-1010 49mm 1 Clutch
31-0315 Smooth 31-0296 31-0337
31-0316 Groove
Cable Clip with ⁵⁄₁₆” hole snaps
on fork tubes to hold cables
and brake hoses. Chrome
Chrome Cable Clamps. Unique two piece design allows easy instal-
VT No. Fork Tubes Handlebar Wiring lation. Swivel head design allows more natural cable routing without
24-0497 41mm Clips snap into late excessive bending. Rubber sleeves protect painted surfaces and cable
24-1024 49mm model stock bars housing. Clamps fit handlebars and aftermarket frames.
Black Cable Clamps with holes at bends. VT No. Size Holes Type
fits 1¹⁄₈” to 1¹⁄₄” bars. 10 pack. 31-0296 1¹⁄₄ -1¹⁄₄” Dual Throttle/Clutch
VT No. Type VT No. Size, 31-0337* Single Cable Holder Only
Inner Diameter for ¹⁵⁄₆₄” (7mm)
37-1511 Throttle
⁹⁄₃₂” (8mm) and ¹¹⁄₃₂” (9mm cables)
37-1512 Clutch 36-0613 ³⁄₈”
31-0338* As Above Dual Cable Holder Only 401
36-0614 ¹⁄₂” *Note: Cable holders only are for use with 31-0296 and 31-0297
Speedometer Speedometer Drive Kit
Cable 1986-95 Rear Wheel 2.1 Ratio
Speedometer Drive Kit fits
FXST-FLST models left side.
36-0127 Use on applications when front
wheel drive unit cannot be
Black installed. Accepts speedometer
Stainless
with 12mm fitting.
VT No. 36-0615
36-0122 36-2552
36-0126 36-0607
Bob Dash Speedometer Cable adapts to speedometer with

⁵⁄₈” outer diameter male thread, and front wheel drive.
VT No. Length Housing
36-2527 36-0607 39½” Black
36-0126 39½” Clear Coated Stainless
Front Wheel Drive Speedometer Cables.
36-0610 42½” Black
Choose by application or by length and top nut size.
36-2548 42½” Stainless
Available in black vinyl, stainless or clear coated stainless.
Black Stainless OEM Length Top
Vinyl Nut
L1984-87 FXE 1985 FXEF Models.
36-2552 36-2527 67077-85 36” 16mm
1987-94 FXR-FLXR, 1984-86 FXRS, 1984-86 FXSB,
Replaces OEM 67078-85A, 67051-73 and 67052-78A.
36-0606 — See Text 40” 16mm
36-0813 — Barnett 40” 16mm Replacement Speedometer Cable Nuts for front wheel drive
— 36-0120 Coated 40” 16mm cables and available in 5 packs.
1987-93 FXRS/SP, Con. VT No. # Type Model
36-2414 36-2529 67048-83A 43” 16mm 36-0397 A 12mm 1981-94 FXR
— 36-0121 Coated 43” 16mm 36-0396 B 16mm Fine 1973-77 FXE
36-0815 — Barnett 42" 16mm 36-0515 C 16mm Course ⁵⁄₈” NPT Fat Bob
36-0608 67052-78B 49" 16mm
Cable Adapter allows use of ⁵⁄₈” cable on 12mm
1987-92 FXRT.
threaded speedometers.
36-2410 — 67054-83A 46.5” 16mm
VT No. 36-0507
1984-95 FXST-FXSTC-FXSTS, 1984-95 FXWG, 1993-94
FXDWG, 1991-94 DG. Replaces OEM 67038-84, 67024-
84A, 67186-88C.
31-0149 28-1998
36-2416 36-2532 See Text 38.5” 12mm
— 36-0122 Coated 38.5” 12mm
36-0603 — 67051-74 39” 12mm
— 36-0123 Coated 39” 12mm
36-0814 — Barnett 39” 12mm Speedometer Cable and Cable Mount for front wheel drive
36-0604 — +4” 43” models 1973-up in 5 pack.
36-0605 — +6” 44.5” 12mm VT No. OEM Item
36-2411 36-2533 67060-79A 38" 12mm 31-0149 38623-68 Chrome Bracket
1987-95 FLST Models. 28-1998 66996-85 Cable Boot
36-2417 36-2428 67079-86A 34” 12mm
The Rubber Cable Boot helps secure
cable screw in threads by reducing vibration
60” Chrome Cable Wrap is a classic at cable end on all front wheel drive cables.
1950’s style dresser trim item. Inner diame- Drive not included.
ter size noted. Sold each.
36-0621 VT No. Size
36-0520 5mm
36-0521 6-7mm
36-0525 10-11mm
402
Electronic
Speedometer Sensor
BIG TWIN
17-0561 17-0585 17-0595
17-0582
36-0802 36-0803 36-0804 36-2450 36-2451

Electronic Speedometer Sensor Unit.
VT No. OEM Fits
17-0561 74437-96B 1996-99 FXST, FLST
17-0582 74430-00D 2004-2006 FLT, 2000-2006 FXST-FLST
17-0585 74420-94C 1995-2005 FXD
17-0595 74429-97C 1997-2003 FLT
36-2452 36-2453 36-0807
17-0672 74402-05B 2006-up FXD, 2007-up FXST, FLST, FLT
2007-up FLT, 2005-up VSRC
39-0581 Harness Deutsch 3-pin Connector Installed.
Speedometer Drive Unit fits front wheel only with .750 axle
Speedometer Sending Unit Wrench features a shortened ³⁄₁₆”
hole. Use for right and left side as noted.
ball end hex bit for removal or installation of hex screws used
Spacer Overall
on all Big Twin models equipped with electronic sending units.
VT No. OEM Side Length Length Fits
VT No. 16-6738
36-0802 67127-84A Left .361” .940” 1984-94 FX-FXR
36-0803 67120-84B Left .574” 1.410” 1984-95 FXST Programmable Transmission
1984-86 FXWG Speedometer Sensor is a fully adjust-
36-0804 67073-81 Right Flat .532” 1981-84 FLH able sensor assembly for all 5 and 6
1984-86 FLT Speed transmissions with electronic
36-2450 67073-87A Left .421” 1.245” 1987-95 FLT drive speedometer. It allows fast and
36-2453 67101-96 Left .442” 1.248” 1996-99 FLT accurate adjustments for any tire size,
36-2451 67132-85A Left .321” .938” 1987-95 FXLR pulley size on gear ratio change.
36-2452 67125-86A Left .608” 1.426” 1986-95 FLST VT No. 36-0150
36-2553 67166-88 Left .461” 1.277” 1988-95 FXSTS
Speedometer Calibrator Corrects readings of
36-0807 Chrome Left .461” 1.277” 1988-95 FXSTS
21” Wheel Speedometer Drive Kit stock electronic speedometers when using over-
includes drive and adapter ring to utilize a sized rear tires or when other drive train modi-
2240:60 speedometer on 1973-80 FXWG fications have been done that effect final drive
dual disc and FLH, single disc. ratio. Use on all Big Twins.
VT No. 36-0565 VT No. 36-0422
31-0315 31-0316
42-0434 42-0434
41mm Push On Fork Tube Clamps to secure speedometer

cables and brake lines.
VT No. Style
31-0315 Smooth
31-0316 Groove
Chrome Speedometer Drive Cover fits over the existing
drive units.
VT No. Year Model Fork
42-5044 1984-94 FXST 41 mm
42-0434 1987-94 FX-FXR 39 mm
Speedometer Drive Seal.
VT No. OEM Model
14-0944 67098-87 1987-94 FXR
14-0947 14-0947 67118-87 1987-95 FXST
403
Snap Cap ™
37-1505
Chrome Dome Cap
37-9537
These bolt cover kits will make any bike look great and are also
for custom builders use. Easy to install these kits have beautifully
designed pieces to cover the raw OE bolt heads on engine, trans-
mission, primary and more, each kit includes detailed instruction
for installation on each model as listed, all covers in each kit are 300 Pc Assortment (37-1505)!
individually packed and numbered for identification.
Chrome Bolt Cap Cover Kit 37-1502 37-1503 37-1504
VT No. Year Kit Quantity
Dynaglide
37-9541 1999-up 156
37-9528 2006-up 76
37-9529 1999-05 86
Softail • Snap On
37-9543 1999-up 175
37-9530 2007-up 81 • Tight Fit Snap Caps™ snap on knurled allen screws for ease of installa-
37-9531 2000-06 87 • Easy Installation tion. Packs of 25 or 100.
37-9536 2009-up 125 100 pack 25 pack Fits
FXCW 37-1502 37-1526 ¹⁄₄”
37-9537 2009-up 105
FLSTSB 37-1503 37-1527 ⁵⁄₁₆”
37-9538 2009-up 116 37-1504 37-1528 ³⁄₈”
Engine 300 Pieces
37-9535 TC-88 79 37-1505 — Assortment
Allen Screw Kit

Chrome Polished Allen Head
Show Bike Kits.
Model VT No. Year
VRSC 1021-P 2002-up
Softail
1004-P 1992-99
1005-P 1989-91
1006-P 1987-88
Gardner-Wescott Fasteners are the perfect combination of Dynaglide (FXD)
allen screws and acorn nuts. Contains timing plug, oil pump, Evo 1007-P 1984-86
left and right side covers, clutch and chain cover, top front and 4-Speed
rear engine mount with stabilizing link fasteners and regulator
bracket mount on FXR-FLT lifter base, point cover, header
mount, casing and inner primary to casing, rocker box, cylinder
base, motor case. Transmission cover and washers supplied
where needed. Where there is a bolt you get an allen screw.
Where there is a nut you get an acorn. All heads polished
chrome, smooth without knurls.
Builders Chrome Fastener Sets
VT No. Fits Big Twin Polished Chrome Engine Sets include all side
37-8097 1996-99 Evo FXST-FLST covers, lifter base, timing plug, inner primary mount, top, front,
37-8091 Late1991-95 Evo FXDG and rear motor mounts with stabilizing link fasteners on FXR
37-0084 1984 Evo All 5 Speed, except FXST and FLT models. Sets also include rocker box covers, header
37-0083 1985-86 Evo 4 Speed and 1984-85 FXST mount and points cover or generator mount where applicable
Cam and Primary Cover Chrome with washers and nuts where needed.
Screw Sets include transmission, chain, Big Twin
clutch or derby provided where applica- VT No. Fits
ble. By Gardner-Wescott. 37-8102 1999-05 TC-88 FXD
VT No. Fits
37-8089 L1991-99 Evo FXDG
37-8503 1985-86 FXR 5-Speed
37-8087 1987-95 Evo FXST-FLST Softail
37-9300 1987-90 Evo Big Twin FXR
37-8085 1986 Evo FXST-FLST
37-8084 1984-86 Evo 5 Speed, except FXST
404
Chrome Allen Show Bike Kits
by Colony for 1999-up TC-88
models.
Show Bike Kit
BIG TWIN
VT No. Model
1000-P 1999-05 FXD Polish
1018-P 1999-06 Softail Polish
2340-10 2341-5
2006-up FXD-FXDWG Screw Kits.

VT No. Fits 2340-10
2344-10 Oil Pan
2345-6 Shift Cover
2340-10 Pulley Bolts
2341-5 Front Rotor
2346-3 Dash Panel
2342-18 Primary Cover
2342-18T Primary Cover
Show Bike Cap Kits in chrome finish.

VT No. Fits Show Bike Kits are original chrome
8520 1987-88 Evo Softail detailing by Colony for models listed.
8521 1989-91 Evo Softail Includes acorn or cap nuts for engine
8517 1984-86 Evo 4 Speed and transmission area. Cap Acorn
8518 1985-86 Evo 5 Speed Acorn
Chrome Gold Year Model
7930 — 1992-95 FXR
7931 — 1996-98 FXR
7917 7917-G 1984-86 Evo 4-Speed Big Twin
7918 7918-G 1985-86 Evo 5-Speed Big Twin
7920 — 1987-88 Evo Softail 5-Speed
— 7921-G 1989-91 Evo Softail and Dynaglide
405
Bobbed Tank for Dynaglide
38-0374 38-0829 38-0257 38-0271
38-0822 38-0545
2” Stretch Tanks fit FXDWG models with stock dash. Tanks
accept right and left side bung cap set.
VT No. Year Gallons
38-0257 1991-95 4.0
38-0271 1996-05 3.7
38-0190
38-0547
38-0549
Bobbed Gas Tanks for FXD and FXDWG models with carburetor
or EFI. Available with left side stock fuel gauge or right and left Bobbed Gas Tank Kit for Dynaglide models. Features one
screw bung. piece 4 gallon design, which includes chrome bung style late
Fits Carb or caps, and all necessary mount hardware for installation. Kit
VT No. Year/Model EFI Gallons Left Cap Type also includes a complete 3 light dash kit which includes a
38-0374 1996-05 FXDWG Carb 4.2 Screw plain dash base without wiring, Bob style speedometer, a 43”
38-0829 1996-05 FXDWG Carb 5.1 Screw speedometer cable for front wheel drive application and a late
38-0822 1996-05 FXDWG Carb/EFI 5.1 Fuel Gauge Bob type 6 post chrome key switch. Units for 1995-up do not
38-0548 2004-05 FXDWG EFI 5.1 EFI include speedometer or cable, but include bracket to mount
2010-17 FXDF EFI 5.1 EFI stock electronic speedometer.
2010-14 FXDC EFI 5.1 EFI VT No. Years Model
38-0545 2006-17 FXDWG EFI 5.1 Fuel Gauge 38-0190 1995-05 FXD
38-0547 2010-17 FXDWG EFI 5.1 EFI Gas Tank Mounting Kit includes chrome
38-0549 2010 FXD EFI 5.1 N/A custom acorn nuts, washers and studs.
FXDWG Dash Bracket will accept 2000-up elec-
Mounts gas tank on 1991-05 Dynaglide.
tronic dash and speedometer plus FXDWG OEM
VT No. 2076-10
electronic dash 71246-95 and 71246-99.
VT No. 31-0803
2” Stretch One Piece Tank fits 1991-2005
FXD-FXDWG carburetor models. 38-0580
includes aircraft cap installed. VT No. 38-0174
accepts vented bung cap.
VT No. Type
38-0426 Cap with key
406
38-0379 38-0380
Bobbed Tank for
2000-17 Softails
BIG TWIN
Note: 2004-up Softail models use electronic fuel injected tank.
38-0371
Bobbed Stretch Tanks fit Softail models will accept left side
fuel gauge.
38-0371
VT No. Type Year
38-0379 Carburetor models 2000-03 2000-17 One
38-0380 EFI models 2004 only Piece Bobbed 38-0370
Carburetor models 2004 only Gas Tank for
Softails. 5.1 gallon
capacity tanks use
stock mount hard-
ware. Stretch tanks
have 2” stretch
welded seam on
extensions. See
notes.
38-0372 38-0798
38-0388
2000-06 Softail 2” Stretch Tank is 4.2 gallon. Tank has right

and left bungs, and has a left side fuel line fitting
VT No. 38-0388
Note: 2004-up carburetor models use electronic fuel injected 38-0261 38-0261 Bottom
tanks.
2000-06 Stock
Type Bobbed for
carburetor models
features right side
cap and left side
fuel gauge.
Accepts fuel gauge
38-0332.
VT No. 38-0376 VT No. Type Model Year
38-0370* Stock Carburetor 2000-06
38-0371* Stretch Carburetor 2000-06
38-0372* Stock EFI 2000-07
38-0798** Stock EFI 2008-10
38-0261** Stretch EFI 2008-10
*Note: Utilizes right and left bung caps, does not have provision
for installing OE fuel gauge.
**Note: Has provision to fit OE fuel gauge in left hand bung hole.
2000-17 Tank Mount Kit includes
all hardware bushings and front
bolt with chrome cap nuts.
VT No. 37-9367
Replica FXBB Gas Tank features a raw finish and accepts a

stock gas cap, mount hardware and fuel injection units. Block Off Plate fits 38-0261.
Fits 2018-UP FXBB, FXBR. VT No. 38-0878
VT No. 38-0532
407
Bobbed Tank for B A
1984-99 Softails
38-0152 Bobbed Gallon Flat Side Mount Tanks
fit 1984-99 FXST-FLST or other flat side
mount systems. Updated shape has taper
from front to rear. Available to accept
stock bung caps.
VT No. Gallon
38-0152 5
38-0129 6
38-0144
38-0120 38-0121
38-0348 A
B 38-0337
Air Craft Cap Style Bobbed Gas Tank Sets fit 1984-99 FXST-
FLST or other flat side tank mount systems. Updated shape is
tapered from front to rear. Filler neck available as “Bolt In” with
Bobbed Gas Tank Set fits 1984-99 FXST-FLST models, fea- insert held in place by 6 chrome allen screws or “Weld In” where
tures screw bung. Note: 38-0122 tanks require insert is welded in place. Order appropriate caps separately.
VT No. Size Item leather pressed steel or the VT No. VT No.
38-0120 3.5 Tank Set flexible tank dividers as the
38-0566 3.5 Tank Set (B) Bolt In (A) Aircraft Gallon
tanks have slightly different
38-0121 5.0 Tank Set shape than stock. 38-0144 38-0157 5
38-0122 6.0 Tank Set 38-0348 38-0337 Cap Set
38-0321 Pair Chrome Caps
Stretched
Stock
Bung
38-0280
Installed
38-0280 features smooth one piece
side panels in 5.2 gallon capacity
38-0566 Stretch Bobbed Tank Set includes flat side style tank. The
“stretched” rear section of the tanks does not hold gas. Fits
1984-99 Softail models. VT No. 38-0280 features seamless
stretched portion. 5.2 gallons. VT No. 38-0280
Fat Bob 3.5 Flatside Bobbed Tank Set features handshift
gate provisions to fit early style gates for 1936-46. These flat
side tanks feature screw type bungs. Order caps separately.
Petcock fitting should be masked or plugged during painting for
easy installation. The side tank features side shift tank mounts.
For use with cateye 1936-1946 type shifter gates or the conver- 38-0637
sion gate for 5 and 6 speed models, smooth type. 38-0638
VT No. 38-0566
A Length Top
B Length Bottom Bobber Tanks for Softails brackets included. Order cap sepa-
C Width Rear
D Width Front rately.
E Height Rear VT No. Year
F Height Front 38-0637 1984-99
G Height Tunnel, Front
38-0638 2000-05
H Height Tunnel, Rear
I Tunnel Length
For Measurements of Our Gas Tanks
see our website www.vtwinmfg.com
Important Gas Tank Information: All tanks are shipped unpainted unless otherwise noted.
Caps and petcocks are not included. Carefully check the new tank for flaws and fit before
painting. Do not grind or sand the seams or joints. Clean the inside of the tank and it is
suggested to pressure test and use a tank sealer. Check petcock openings, making sure the
petcock can be easily installed. Use proper hardware to mount tank, including the bushings,
brackets and spacers required for assembly. Tedd Cycle, Inc. is not liable for paint work or
labor claims of any kind. Tedd Cycle, Inc. is not the manufacturer of the gas tanks.
408
Indented Side
Panel Styles Bobbed Tank
for Softails
BIG TWIN
38-0273 38-0194
38-0123
Smooth One-Piece Tanks fit 1984-99 Softail models are 4.2

gallon, stretched and includes hardware for mounting. Order
stock bung caps separately. Some seats may not match up.
VT No. 38-0155 is a 2” stretch 1 piece tank with a 2” extension
38-0081
welded on. 38-0273 does not have seat cut out.
VT No. Cap Stretch Sides
38-0273 Single 2” Smooth
38-0194 Single 3” Smooth, Aircraft
38-0178
Bobbed Gas Tank for 1990-05 Dynaglide and 1982-94 FXR

are a one piece, 4 gallon unpainted tank with dash cut out
which includes a chrome dash panel. It bolts on with no addi-
tional hardware. Tank with dash cut out requires purchase of
complete dash kit.1996-05 FXD models require purchase of VT
No. 39-0124 Speedometer Adapter to reuse existing speedome-
ter in a bobbed dash. Tank will accept stock dash from 1991-96
FXDWG. Smooth tank fits 1991-05 all FXD-FXDWG.
VT No. Dash Cut Model Years
38-0123 With FXD 1990-05
38-0081 Without FXR 1982-94 Bobbed Tank Kit for 1995-05 FXD models are 4 gallon avail-
able with chrome cast dash assemblies which include a Bob
type 6 post key switch and a plain dash base. Pre 1995 units
Allen Type Gas Tank Mount Kit fits include a Bob speedometer. 38-0178 kits include an adapter
1988-94 FXRS. ring to allow reuse of the existing electronic speedometer.
VT No. 37-9294 Chrome caps included.
VT No. 38-0178
35-0710
35-0714
38-0507
38-0506
Fuel Gauge.
Fits FLHR 2008-UP Fuel Tank Sending Units are digitally calibrated for accura-
Chrome Black cy.
38-0506 38-0507 VT No. OEM# Fits
Tank Assemblies sold with “Plain Dash Base” are not designed to be 35-0710 75034-82 1982-87 FXR
wired for instrument lighting. Dash bases VT No. 39-0959 for 3-light and 35-0714 75300-05 2005 FXSTI, FLSTI, FXSTSI, FLSTFI
VT No. 39-0960 for cast dash are available separately for builder requiring
dash lighting.
409
Tank Mount Kit FXST Allen Tank
Mount Kit includes
two brackets, chrome
allens and chrome
washers for 1984-99
FXST-FLST.
38-0855 38-0856 38-0858 38-0859 VT No. 38-7021
Tank Lifter Kits will raise the front of the stock gas tank.
VT No. Year Model Lift
38-0855 1997-05 FXDWG 2”
38-0856 1997-05 FXDWG 3”
38-0858 2000-10 FXST 2”
38-0859 2000-10 FXST 3”
Gas Tank Mounting Kit includes
chrome custom acorn nuts, washers
and studs to mount gas tank on 1991-
17 Dynaglides.
VT No. 2076-10

chrome custom acorn nuts,
washers and stud.
VT No. Fits VT No. # OEM Item
2077-5 2000-17 Softail 28-2006 A 11447 Rubber Grommet
2528-10 1990-95 Softail 31-0236 B 61660-85 Upper Bracket with threads
31-0234 B 61660-84 Upper Bracket without threads
31-0235 C 61667-84 Lower Bracket
Chrome Tank Mount Kit includes 31-0455 C 61667-90A Lower Bracket
all hardware and front bolt with 1991-99 with threads
chrome cap nuts. Fits 2000-up 37-9094 D 5775 Spacer
Softail. 40-0364 E 63505-84 Hose, 10 ft.
VT No. 37-9367 38-0222 F Kit Chrome Bolt Kit 1984-90
37-1427 7965 “T” Nut
2072-4 FXST Lower Gas Tank Mount

Kit for 1984-99 style flat side
tanks includes chrome acorn
Fuel Tank Chrome Mounting Hardware Kits. nuts, thread stud and two beveled
VT No. Fits washers.
37-9250 1984-89 Softail Models VT No. Style
37-9294 1988-94 FXRS Models 2072-4 Flat Allen
37-9252 1990-99 Softail Models 28-2006 Rubber Grommet
2072-4 1990-99 Softail Models 2076-10
37-9253 1991-up Dynaglide Models
2076-10 1991-17 Dynaglide Models
chrome countersunk washers and flat
2077-5 2000-17 Softail Models
head allen bolts. Mounts lower front gas
Custom Tank Mount Bolt Sets.
tank. Fits 1991-99 Softail.
37-9330 2000-17 Softail Lower
2077-5 VT No. 2072-4
2000-17 Softail Tank Mount

Adapter Kit allows 1984-99 38-0238 Rubber Grommets and Spacers Kit
two piece Bobs to be mount- includes rubber grommets and spacers,
ed to 2000-17 models and used on all 1984-1999 Softail. Pack of 10.
utilize original dash panel. VT No. 38-0238
VT No. 51-0519
Weld-On Rear Tank Dowels are

tapped for ⁵⁄₁₆ — 24 thread.
VT No. 51-0858
410
Wire Harness/Dash Base Assembly
39-0191 Note: Order the appropriate factory service manual to
BIG TWIN
facilitate wire harness installation.
39-0194
Wiring Harness /Dash Base Assemblies include complete

harness pre-wired to 5-light dash base, 6 post key switch, ter-
minal box, horn button, dimmer switch, headlamp connection,
speedo lamp socket and front terminal board when required.
VT No. 39-0193 uses 39-0399 flasher (included). 39-0191 39-0193 Note: Order
speedometer
requires use of 32-7508 turn signal canceler available sepa-
separately.
rately. The 1987-95 assemblies require purchase of handlebar
switch wiring.
VT No. Year/Model
39-0193 1987-88 FXST-FLST
39-0194 1989-90 FXST-FLST
39-0191 1991-95 FXST-FLST
39-0968
39-0960
Relax...We’ve done
your homework on this
one!
FXST Builders Harness/Dash Base Assembly. Builders

Harness includes all correct color coded high tension wires,
handlebar wires and tail lamp wires for years listed. Dash base
assembly includes wired base, 6 post switch, circuit breakers
and flashers. Allows use of either the turn signal canceler VT Assembled Dash Bases are wired with all sockets.
No. 32-7508 (not included) or flasher VT No. 33-0399. VT No. Item Year
VT No. Item Year 39-0960 Cast 1968-95
39-0968 Dash Base Assembly 1987-95 33-0133 Bulb 1965-up 12 Volt
32-0675 Builder Harness 1987-88 Light Sockets available with steel or
32-0456 Builder Harness 1989-90 plastic body. Bulbs are included.
32-0726 Builder Harness 1991-95 VT No. Item
B C 33-0129 33-0129 1 wire, 3 pack, steel
33-1983 2 wire, 3 pack, plastic
A
33-2007 2 wire, 3 pack, steel
Socket has ground wire
33-1983 33-0534 2 Wire, Insulated type, pair
33-0531 Speedo socket 12V
33-0537 1986-95
Dash Mounting Plates available plain, less wiring and sock- 33-0138 12v bulb, 10 pack
ets, or complete with sockets and hardware.
VT No. # Type Dash Year
39-0138 A Plain only 2 and 3 1948-up
39-0944 B Base only Cast 1973-up 39-0209 Dash Mount Hardware
includes bolts, spacers
39-0960 C Assembled Cast 1968-95
and hardware to install
Dash Plate Ignition Switch Spacers are for spacing dash 1948-98 type dash mount
base and switch in relation to tanks, packs of 10. bases on 1984-98 FXST-
VT No. Size Tyxpe FLST models with flat
39-0420 .030” Dash 39-0422 side tanks.
39-0421 .060” Dash VT No. Item
39-0422 .120” Dash 39-0209 Kit
39-0118 .040” Switch 39-0118 39-0210 Spacer, Front
39-0214 Spacer, Rear
411
Tank Divider
Chrome Dash Panel Extension
extends the look of the dash on
2000-17 Softail models. Replacing
39-0926 39-0928
71283-01.
VT No. 39-0429
Chrome Panel Edging

slips on sheet metal
dash panels and hub
cap edges for decora-
39-0926 tive use. Sold in a 10
Installed foot roll.
VT No. 37-8943
FXST Tank Panel Mount Nuts and Screws.
VT No. OEM Item
37-9129 37-9128 61641-84 Bushings, 5 pack
37-8700 Screw Chrome Button, 10 pack
37-9129 39-0926
37-9129 Kit As above
Chrome Die Cast Tank Trim Panels replace existing rubber
divider on 1984-99 FXST-FLST with die cast dash. Speedometer Adapter Ring fits 1995-
VT No. Years/Model Type 17 FXD. It includes mount bracket and
39-0926 1984-99 FXST Chrome adapter ring to fit cast dash.
39-0928 1984-99 FXST Gold Inlay Eagle Spirit VT No. 39-0192
28-0433 Rubber Pad fits B, C, D
37-9129 FXST Screw Kit
Tank Panel Black Rubber Divider for 1984-
99 FXST models.
VT No. 28-0714
39-0100
Chrome Long Rider Dash Panel

is constructed of ABS plastic. Fits Chrome Dash Cover fits 1982-92 FXR, 1984-87 FXRS,
bobbed tanks on 1968-95 FLH-FXWG- FXRT, 1986 FXRD, 1987-92 FXR, FXRT, FXRS-SP and
FXST models. Rubber strip included. FXRS-CON. Replaces 61411-82. The two holes accept a fuel
VT No. 39-0450 gauge and gas cap.
VT No. Item
39-0100 Chrome Cover
9014-3 Acorn Bolt Set
28-2238 Rubber Trim Strip
Chrome Dash Panel Screws for 2005-up FXDWG.
VT No. 2346-3
39-0702 39-0704
39-0703 39-0700
39-0973
Instrument Gauge Bezel Cover take just seconds to install

and add beauty to your dashboard. Available in chrome or
black finish. Include adhesive tap for easy press in place instal-
lation. **Note: Cover fits 2” diameter gauge. *Note: 39-0702 is
sold as each and 39-0703 is a set.
Chrome Black Fits Gauges Years/Models

39-0702* 39-0703* Speedo & Tach 1996-99 FLHT, FLTR
39-0700 Speedo & Tach 2000-13 FXD,
39-0974
2013-up FXD, FXSB, FXT
Long Rider Dash Complete Kit with speedometer and 39-0704** 39-0705** Volt, Air Temp 1986-13 FLHT, FLHX,
switch for 1948-95 Big Twins. Fuel & Oil FLTRX, FLHTCUTG
VT No. Ratio Pressure
39-0973 2:1
39-0974 2240:1
412
39-0896
Dash
39-0219
BIG TWIN
LED Dash Cover Chrome fits 1968-1984 FL.
VT No. 39-0219
39-0179
39-0467
39-0564
39-0549
Speedometer Reset Knob fits 1998-up models. Replaces
67854-98.
VT No. Item Model
39-0549 Reset Knob All
39-0179 Reset Knob Boot All
39-0564 Reset Knob Kit
Speedometer Sensor
Programmable Transmission Speedometer
Sensor is a fully adjustable sensor assembly for all
5 and 6 Speed transmissions with electronic drive
39-0896
speedometer. It allows fast and accurate adjustments for any
Installed
tire size, pulley size on gear ratio change. VT No. 36-0150
with 39-0453
Speedometer Calibrator
36-0422 Corrects readings of stock
electronic speedometers when
using oversized rear tires or
when other drive train modifi-
cations have been done that
effect final drive ratio. Use on
32-0439 39-0453 all Big Twins.
39-0449
VT No. 36-0422
Speedometer Sending Unit Wrench features a shortened ³⁄₁₆”

ball end hex bit for removal or installation of hex screws used
1996-up Softail Bo bbed Dash Components. on all Big Twin models equipped with electronic sending units.
VT No. OEM Item VT No. 16-6738
39-0467 1996-99
39-0101 71254-96 1996-99 Dash Only Chrome Speedometer Sensor Block-Off
39-0896 Kit 1996-99 Chrome Dash Panel with Switch Plate Kit includes plate, gasket and mount-
Component Listing ing screw for 1996-up Softail.
37-0555 7497 Acorn Lock Nut, 1996-up VT No. 17-0234
33-0134 53439-79 Bulb Back Light, 1996-up
39-0449 67033-99 MPH Speedometer, 1999-03
28-0139 67190-89 Speedometer Seal, 1989-up
39-0179 67880-94 Reset Switch Boot, 1994-up
33-0137 68024-94 Indicator Lamp Bulbs, 1994-98
39-0180 71302-93 Switch Name Plate, 1994-17
32-0439 71313-96 Ignition Switch, 1996-up
32-0931 72191-94 Terminal, Socket
32-0936 73191-96 Socket Contact
Dash Board Rubber Strip closes the

gap between dash and tanks.
VT No. Fits Type Model
28-0543 1968-94 Dash Big Twin
28-0554 1988-92 FXRS FXR
28-0540 1977-84 FXS Type FX
413
Cast Dash Kit 39-0383 39-0413
39-0913
39-0914 Installed
37-9121
Installed
39-0940
Dash Panels include lens & rubber strips except where noted.
FLH-FXST Dash Kit features chrome cast dash with lens and
VT No. Finish Model
hardware, 6-post switch, choke cable and knob, all mounting
39-0383 Chrome 1968-90 Big Twin-FLH FXST-FXWG
hardware and trim strips. Stock on 1968-84 FLH- FXWG,
39-0413 Gold 1968-90 Big Twin-FLH-FXST-FXWG
1984-95 FXST-FXWG is 2240:60 ratio. Can be adapted to all
39-0940 Chrome 1991-95 Big Twin FXST
31/2 and 5 gallon tanks. Dash base has wiring and sockets.
Chrome Dash Mount
Spacer kit VT No. 39-0209 is included to mount on 1984-99
Stud Kits include stud,
Flat side tanks. Choose the proper cable for each application.
VT No. Type nuts, nylon washer and
39-0913 1:1 Ratio either skull or acorn
37-9121 37-9122 nut, Fits 1968-up cast
39-0914 2:1 Ratio
39-0972 As Above without Speedometer VT No. Type dash panel on FXST-
39-0967* As Above without Speedometer 37-9121 Acorn FL-FXWG when choke
39-0962 2240:60 Ratio 37-9122 Skull cable is not used.
39-0919 1:1 Ratio with Tach 37-0573 Stud only
39-0920 2:1 Ratio with Tach 1975-95 Dash Hardware
*Note: Includes plain unwired dash base. Kit includes parts pictured
Dash Panel Decal fits 1979-93 FL-FLH-FXWG It to fit the FLH-FXWG-FXST
has a black matte finish, adhesive back, pack of 5. cast type dash, stock or
VT No. 48-0423 39-0383.
VT No. 39-0382
Choke Cable Nut Kit includes nut and seal for

dash mounted choke on FL-FXWG-FXST models.
VT No. 37-8942
Late Dash Parts fit late cast dash panel 1968-95 FLH-
How to choose the right Speedometer:
For Stock Application FXWG-FXST.
2240:60 Fits all Softail and 4-Speed FXWG, 1984-90 and 4-Speed FL, VT No. Year/Item
Ratio
1981-84 models with front wheel speedometer drives with 16” 39-0345 Support
and 21” front wheel applications, and 1996-2007 electronic
speedometers. The 2240:60 may also be used in conjunction
39-0347 Retainer
with 1991-95 speedometers with reed for self-canceling turn sig- 39-0348 Lens clip
nals if specified.
Dash Panel
Chrome Center Tank Panel for the
Dash
split tanks of 1977-84 FXS-FXSB- 28-0200
FXEF-FXB. VT No. 39-0104
Panel 39-0424
Chrome Dash and Panel. Order bolt kit separately.
VT No. Item Fits
39-0424 Dash 1995-03 FXDL
28-0554 Rubber Trim Dash All
28-0200 Rubber Trim Panel All
37-8706 Screw ¹⁄₄ x 20 x 11/2 Dash Mount Screw
414
39-0144
2 or 3 Lite
Dash Kit
BIG TWIN
39-0111 39-0110
39-0910
39-0893
39-0892
Dash Panels
VT No. OEM Type Finish
39-0111 71271-56 2 Chrome
39-0953 71271-56 2 Raw
39-0110 71272-62 3 Chrome
39-0144 Without key switch hole Chrome
39-0893* Smooth 3 Chrome
39-0892* Smooth — Chrome
*Note: Fits XL gauge. 91.5 mm opening for 95-00 XL-FXD Speedo
39-0907
2 Lite
Dash 39-0964
2 or 3 Light Dash Kit. Can be ordered with plain base VT No.
39-0138, or wired two light VT No. 39-0958, or three light base
with sockets and bulbs 39-0959. Includes either 1:1 or 2:1 ratio
Cateye Dash Kit is complete as illustrated. Packaged on 18” speedometer and the correct 5 post key switch with 2 keys.
x 24” board for point of purchase display. Can be ordered with Order plainbase dash kit when it is not desired to rewire harness
either plain 39-0129 base, or wired 39-0126 base with sockets for dash lighting. Choose proper cable for each application. Can
and bulbs. Includes either 1:1 or 2:1 ratio speedometer and be mounted on 1984-95 FXST-FXWG models and 1991-94
the correct five post key switch with two keys. Order plain FXDWG.
base dash kit 39-0129 when it is not desired to rewire harness VT No. Type
for lighting base included is 39-0129. Order cable separately. 39-0904 3 Light Plain Base 1:1
Can be mounted on 1984-91 FXST and requires 39-0209 39-0951 3 Light Plain Base without Speedometer
spacer kit. 39-0897 2 Light Wired Base without Speedometer
VT No. Type 39-0905 2 Light Plain Base 1:1
39-0921 2:1 With Tachometer, includes wire base 39-0906 3 Light Plain Base 2:1
39-0922 1:1 With Tachometer, includes wire base 39-0907 2 Light Plain Base 2:1
39-0112 Dash Panel 39-0908 3 Light Wired Base 1:1
39-0129 Plain Dash Base 39-0909 2 Light Wired Base 1:1
39-0915 39-0918 39-0910 3 Light Wired Base 2:1
39-0911 2 Light Wired Base 2:1
V-Twin Dash Kits are available with the popular tach-speedo

combination included. Can be wired to 1978-up FX-FL models
with a tach that is triggered by coil impulse. See instructions
for tach wiring. Wired base includes light sockets and all hard-
ware for installation. 39-0130 39-0124
VT No. Type Ratio
39-0915 2 Light 2:1 Speedometer Adapter Ring adapts to late model speedom-
39-0916 3 Light 2:1 eter into FLH style steel dash cover. FLH Dash is shown with
39-0917 2 Light 1:1 39-0130 adapter ring installed, adapter ring must be affixed with
39-0918 3 Light 1:1 an industrial adhesive for a leak proof seal. VT No’s 39-0124 and
39-0192 include chrome ring and bracket to mount electronic
speedometer in FLH style dashes.
VT No. Fits
39-0130 FLH type, chrome
Warranty- All Instruments sold as individual pieces or in kits are covered under our warranty 39-0124 1995-up XL and FXD includes mount bracket and
“Replacement Only” Provision. Gauge related item part numbers begin with a 39 prefix. No
credit will be issued for these items as they are exchange only. adapter ring to fit 2 or 3 light dash and cast dash.
415
Electronic 39-0651
Speedometer
Installed
39-0453 Speedometer.
VT No. Fits OEM
39-0453 1999-03 FLHR 67033-99A
39-1128 2004-13 FXDWG
FLST, FLHR, FXST 39-0610
39-1130 2004-11 FXD,
2004-13 FLT and XL

39-0449
Speedometer feature all OEM gauge func- Electric Speedometer Assembly with digital tachometer avail-
tions including check engine light. Fits all able with black face that looks like stock gauge or LED type.
1996-03 FLHR, FXST, FLST and FXDWG Both units feature a 8000 RPM tachometer, LCD odometer and
models. Plug In installation for 1999-03 trip meter. Plug installation for all 1999-03 models and 996-98
models and 1996-98 models will require models will require a separate purchase of sub-wiring harness
separate purchase of sub-wire harness that for correct installation. All 1993-03 models with require the use
will allow plug installation on 1996-98 wir- of a tachometer wiring kit sold separately.
ing harness. Gauge reads 0-120 MPH and Fits 1996-03 FLHR, FXST, FLST, FXDWG.
has LCD odometer. Replaces 67027-99. VT No. Item
VT No. Year 39-0651 Black Face Gauge
39-0449* 1999-03 39-0610 LED Gauge
39-0768
Sub-Wire Harness Sub-Wiring Harness Required for Above
32-0587 32-0587 1996-98 VT No. Use On
32-1334 1996-97 FXDWG 32-0587 1996-98 FXST, FLST
32-1335 1998 FXDWG, FLHR 32-1334 1996-97 FXDWG
39-0768 1996-97 FLHR 32-1335 1998 FXDWG, FLHR
Speedometer Reset Knob 39-0768 1996-97 FLHR
fits 1998-up models. Tachometer
VT No. Item 32-1336 1996-03 FLH, FXST, FLST, FXDWG
39-0564
39-0549 39-0549 Reset Knob
39-0564 Reset Knob
39-0179 Reset Boot
39-0179
80mm Electronic Speedometer with 39-0084 39-0085 39-0086
a black body features a 0-140 mph Speedometer and Tachometer Combination with a 5” speed-
silver and black bullseye graphics on ometer featuring MPH numerals. Display shows engine speed,
the speedometer face. Gauge has dig- segmented fuel level, gear position, tripmeter, miles-to-empty
ital RPM gauge and the mileage and and time. Features adjustable push button with multi-color
trip indicator on the face of the gauge. backlighting which allows for adjustment of the face. Mounts to
The gauge also has indicators for high beam, neutral and turn the stock dash opening with direct plug in installation. Mileage
signals. Universal mounting bracket included. Fits all 1995-up must be updated at the time of installation, no programming
Twins with electronic speedometer; 95-up FLT, FXST, FLST, required.
95-17 FXD, 95-up XL. VT No. 39-0617 VT No. OEM Fits
39-0084 67313-05 2004-06 FXDWG, 2007 FXDC
FX-FXRS Gauge 2004-06 FXST
39-0085 7090070B 2004-11 FXD, 2004-10 FXST,
Replacement Clear Lens replaces fogged, 2004-13 FLHR
cracked or broken lens on stock gauges 1982-83 39-0086 74774-11 2012-up FXD, 2011-up FLST
FXR models. Cut off old lens and seal new one 2014-up FLHR
in place. Sold each. VT No. 39-0391 Speedometer Gauge Bezel. Chrome plated two
piece design bezel clamps around any large style
31-3964 Speedometers have full FLH, FXST, FLST or FXDWG Fatbob type 5” speed-
black plastic case and include ometer. VT No. 42-1049
brackets. Brackets, replace- Speedometer Head with 2240:60 ratio
ment plastic lens, and fork for front wheel drive. Features readings of
tube plugs for mounting 10-120 MPH. Fits 1986-93 FXR.
brackets and 12 volt bulbs are VT No. 39-0934*
VT No. Fits/Item sold separately. *Note: With auto turn signal switch
39-0372 10-150 MPH
1982-83 FXR-FXRS Tachometer Replacement Type, 0-8000 RPM.
31-3964 Speedometer bracket, chrome Order lamp separately. Fits 1983-87 FXRS,
39-0391 Lens only, each Electric, 1987-93 FXRS-SP, FXRS-CON, 1983-
33-0133 12V Bulb 85 FXRT, Electric.
416 VT No. 39-0935
Speedometer
39-0929 39-0737
Cable Drive Type
BIG TWIN
39-0384 39-0380 FXST-FLST Speedometer with Tachometer
features built in electric tachometer which oper-
39-0374 ates from coil impulse. Ratio is 2240:60. Fits
1984-90 FXST, 1986-90 FLST.
VT No. 39-0380
39-0377 39-0378 39-0730
2240:60 Ratio
39-0609
39-0379 39-0376 Multi-Ratio Speedos are programmable for 1:1, 2:1 or 2240:1
Speedometer fits FXST-FLST in Fat Bob dashes. Accepts ratio and feature a LED odometer readout or full digital readout.
39-0403 reset knob. VT No. 39-0929 and 39-0737 feature sig- Will accept 12 or 16mm (⁵⁄₈”) cable ends.
nal cancel switch and one wire lamp socket. VT No. Item Type
VT No. Year 39-0731 Speedometer LED
39-0384* 1984-90 39-0730 Tach/Speedometer LED
39-0929* 1991-95 39-0609 Tach/Speedometer Full Digital
39-0377* 1984-90 39-0979 Speedometer Full Digital
39-0378* 1984-90
39-0374* 1984-90
39-0379* 1984-90
39-0376* 1984-90
39-0737* 1991-95 28-0155
28-0419
Note: Use 36-2416 or cables with 12mm nut. 39-0396, 39-0385 Speedometer-Iso-Support is a molded rubber support to
use 36-0607 or cables with ⁵⁄₈” nut. increase speedo rigidity and reduce vibration for FL-FXST-
FLH Speedometer Isolation and FXWG-FLST. Use in conjunction with speedometer-iso mount
Mount Kit mounts speedometers with
pin kit VT No. 28-1952. Kit includes 28-1952 and 28-0419.
³⁄₈” holes replaces 67066-76. Kit includes
VT No. Item
two pins, clips, bushings and molded
outer ring. 28-0419 Support
28-1952 Kit 28-0155 Kit
12-0594 Snap Ring Only Speedometer and Tachometer Lamp Sockets fit
28-0139 Seal, 1989-up Softail FX-XL models or FL as noted.*Note: Cloth covered
39-0945 wired. All other numbers are vinyl covered
VT No. OEM Fits Model
39-0406 39-0338 33-1959 67327-78 1979-85 FX-XL
39-0403 37-0519 33-1960 92045-76 1976-77 FX-XL
Reset Knobs. Order for proper applications. 33-0537 71158-86A 1986-95 FLST
VT No. OEM Years/Type 33-2171 67034-83 1983-86 FX-XL
39-0403 67215-89 1981-95 FXST 33-1933 67202-86 1986-90 FX-XL
37-0519 67117-85 Screw for Above,10 pack 33-1934 67107-83 1983-90 FX-XL
39-0406 1981-95 FXST 39-0135 71151-67B 1967-73 FX-XL
39-0338 Alloy All Female 33-2008 Mini Gauge 48mm —
39-0945 67108-83 1987-94 FXLR 33-2039 Mini Gauge 60mm —
Speedometer Adapter Stud will allow the use 33-0531 71151-48 1948-85 FLH
of 39-0134 later knob in speedometer with alloy 33-0529* — 1948-85 FLH
knob. 33-0537 71158-86B 1986-94 FL
VT No. 39-0173
417
Mini Gauge Kit 39-0367 39-0392
39-0315
39-0368
39-0370 31-9997 33-2047
39-0371 33-2008
48mm Deco or 60mm Mini Tachometer Kits

39-0598 39-0575 48mm 60mm
Deco Mini Model/Years
Tachometer
39-0367 39-0392* Electric 3-wire type
31-9997 Fits All Chrome Y mount
33-2008 Fits All Light socket with bulb
33-2047 Fits All 12 Volt bulb, 10 pack
48mm Deco or 60mm Mini Speedometer Kits include gauge, Note: For use on 1978-up models with coil triggered tachom-
chrome bracket, rubber handlebar clamp, and proper cable
eter. Green Negative wire goes to negative side of coil. Red
which can be installed without any adapters or modifications.
wire goes to ignition side of key switch. Tachometer head
48mm 60mm
Deco Mini Ratio Model/Years must be grounded by black wire.
39-0368 39-0315 2:1 1973-95 FX, 1981-84 FL
39-0370 39-0371 2240:60 1981-96 FXST-FLST
39-0598 39-0575 Electric 1995-up FXD
1996-up FXST
Gauge Billet Housing Kit

Chrome Billet Housing will accept 48 mm
electronic tachometer or speedometer.
VT No. 39-0116
39-0202
Installed
39-0785
39-0786
Chrome Handlebar Gauge/Clock.
VT No. Description
39-0785 Clock with White Face
39-0786 Temperature Gauge 39-0204 39-0202 39-0203
Chrome 60mm Tachometer Housing Kit includes bracket
31-0026 Handlebar Clamps allow mounting of all types of to mount to Softail and FXDWG fork stem bolt, 60 mm elec-
necessary items with easy installation, fits 1.25” tric tachometer, or electric speedometer to fit 1995-up models.
and 1” diameter handlebars. Available in black Housing which is available separately may be fitted with any
or chrome finish. Kits include mounting hardware 60mm electric speedometer or gauge.
31-0027 and reducer for 1” bar applications. VT No. Item
VT No. Finish 39-0202 Tachometer Kit
31-0026 Chrome 39-0204 Speedometer Kit
31-0027 Black 39-0203 Housing Only
Chrome Clamp includes molded rubber insert to
attach mini gauges to handlebars for less vibration.
VT No. 28-0325
418
Digital Speedometer
and Tachometer
BIG TWIN
Front Views of 39-0599 and 39-0685 39-0439 39-0578
39-0685
A
39-0599 Installed with 31-2145

31-0984
39-0599
B
31-2145
39-0440 39-0579
Digital Speedo/Tachometer has the following functions:
• Bar Graph Tach
• High Beam
• Neutral
• Oil Pressure 39-0580
• Turn Signals
• Digital Odometer
• Trip Meter
39-0441
• MPH Only
• Unit measures 48mm 60mm
110mm (L) x 57mm (H) x 38mm (W). White Black
VT No. Item Face Face
39-0599 Gauge (B) Requires an installation bracket 3-LED 4-LED Ratio Item Year
39-0685 Gauge (A) No bracket necessary for installation 39-0439 39-0578 2:1 Speedometer 1973-94
31-2145 Bracket 39-0440 39-0579 2240:60 Speedometer 1981-94 Softail
39-0550 39-0550 39-0438 39-0576
39-0436
39-0437
Mini Gauges include cable and mount clamp.

Note: 39-0556 and 39-0437 includes left side speedometer drive. 39-0550 and 39-0561 feature indicator lights.
• Blue-High Beam
• Green-Neutral
• Red-Oil
• Yellow-Turn Signals
White Face
48 mm 60 mm Ratio Item Year
— 39-0550 2:1 Speedometer 1973-94
39-0436 — 2240:60 Speedometer 1981-94 Softail
39-0437** 39-0556** 2:1 Speedometer 1995-99
39-0438 39-0576* 1978-up Tachometer Custom
33-2043 — Light Socket
39-0550, 39-0556 have indicator lights, when installed on
Pre-90 models tap into orange wire exiting turn signal flasher 1991-up models signal indicator light can not be used.
**Note: Includes 2:1 ratio left side speedo drive unit.
419
Mini-Gauges 39-0858 39-0859
2” Mini Electronic Speedom-

eter fits 1997-up FX.
VT No. 39-0464
39-0593 39-0860
39-0433
60mm Mini Electronic Speedometer/Tachometer.

Speedometer features easy push button recalibration and
re-settable trip meter, with LED lighting. The 8000 RPM
tachometer has LED lamp. All units have a black face and
include clamp. Order 12mm speedometer cable separately on
mechanical device speedometer only.
Three functions are (1)accumulated mileage (this can not be reset), (2) Trip 1
Multi-Colored Mini Gauge. The 60 mm gauge features a 2.4” (can check total mileage for 1 full gas tank, can be reset to zero), (3) Trip 2 (cal-
polished stainless body and a white face with a total length of culate
2.7”. Units include a chrome bezel with choice of red, orange, mileage from A to B destination, can be reset to zero).
blue, yellow, white, green or purple by the push of a button, VT No. Ratio Type Item
works on a 12 volt system. Tachometer adapter required for 39-0858 2:1 Mechanical Drive Speedometer
use with single fire ignition. Speedometer accepts 12 mm drive 39-0859 2240:60 Mechanical Drive Speedometer
cable. Order clamp separately. 39-0593 Electronic Drive Speedometer
VT No. Gauge Ratio 39-0860 0-8000 RPM Electronic Tachometer
39-0433 Speedo 2240:60
39-0575 39-0392
Digital Speedo & Tach
Plastic Speedometer and
Tachometer Assembly clamps to
1” or 1¹⁄₄” bars and includes speed,
rpm and temperature functions.
VT No. 39-0758
60mm Electric Tachometer and Speedometer fit models
Specifications
1978-up for tachometer and 1995-up for speedometer applica-
Housing Size 120 mm x 42 mm x 28.5 mm
tions.
4.72” x 1.69” x 1.12”
VT No. Item Year
LCD Blue LCD with LED backlit
39-0575 Speedometer 1995-up
Speedometer 0-299 mph, 0-399km/h
39-0392 Tachometer 1978-up
Odometer 0-99,999.9 miles/km
Trip Odometer 0-999.9 miles/km
Engine Speed 0-20,000 rpm
39-0789
80mm Electronic Speedometer Gauge features stainless

housing and Y bracket. For custom application on 1995-up Big
Twins.
VT No. 39-0789
60mm Electronic Speedometer fits electronic equipped

sensor 1995-up models. Features blue-backlit LCD display.
Bracket and cable included.
Speedometer 0-140 mph or 0-140km/h (selectable)
Odometer 0-99999.9 miles/km
Trip Odometer 0-99999.9 miles/km
Clock (12 hours)
VT No. 39-0540
420
39-0162
Gauge Mount
BIG TWIN
39-0395
39-0397
39-0394 39-0941 39-0212
39-0955 39-0400 39-0942
39-0943
39-0956 39-0141
39-0213
Chrome Gauge Covers fit FXR models.
39-0162 Set 1984-90 Tachometer and Speedometer
39-0395 67092-85 1984-94 Tachometer
39-0394 67090-85 1984-90 Speedometer
39-0943 67091-91 1991-94 Speedometer Speedometer and Tachometer Brackets in chrome fit FXR
39-0955 92061-83 1983-up FXR Rubber Cushion models. VT No. 39-0397 includes visor.
39-0956 67104-83 1984-91 XL Rubber Cushion VT No. OEM Light Years Type
1987-up FXLR 39-0397 67053-86 4 1986-91 Single
39-0941 67083-92 Slot 1992-94 Single
39-0212 67293-95 1995-05 Single
31-0877 39-0141 67110-83 3 1983-91 Dual
39-0400 67036-86 4 1983-91 Dual
31-0877 39-0942 67167-92 Slot 1992-94 Dual
Installed 39-0213 67294-95A 1995-05 Dual
Chrome Billet Fork Tube Gauge Bracket permits quick and
easy installation of mini 48 mm gauges to exposed 41 mm fork
tubes. Gauges are sold separately.
VT No. 31-0877 33-2025
33-2022 33-2023 33-2024

Indicator Lamps for 1986-up FX-FXR-FXD.
VT No. OEM Color Type
33-2022 68489-86 Red Oil Pressure
39-0603
33-2023 68574-86 Green Neutral
39-0602 39-0604 39-0605 33-2257 68574-86 Green Neutral, Chrome Bezel
Chrome Billet Gauge Holder fits 48mm or 60mm gauges for 33-2024 68023-92 Blue Hi-Beam
T-type bars 1” or 1¹⁄₄” with 3¹⁄₂” center. 33-2025 68695-91 Green Turn Signal 1991-up
48mm 60mm Holes Type
39-0602 None Single
39-0603 2 Single
39-0604 39-0613 None Dual
39-0605 2 Dual
48-0498 48-0470 48-0030 48-0033 48-0025 48-0044 48-0048 48-0372 48-1824

80” UL Knucklehead 1340 cc Dual Cam Panhead Shovelhead Shovelhead XLCH 1971 45”
Motor Plaques measure 18” x 24” and are made of metal.

Motor Plaque Set includes 9 plaques. VT No. 48-1811
421
Oil Tank
Chrome Oil Tanks fit 1986-99
Softail frames.
for
VT No. Oil Fill Shape Finish
Softail and Rigid Center Keg Chrome
31-1259 Bracket Side
6” Diameter Round Oil Tank fits
40-0468
FXST style rigid and stock Softail
frames. Utilizes stock front and rear
Softail mount. Top brackets must
be fabricated for installation to use
with custom frames. Order bracket
set separately.
VT No. Finish
40-0468 Raw
31-0221 Brackets
37-8961 Drain Plug
40-0477
40-0476 Rocket Oil Tanks is 5” diame-

Installed ter to fit Rigid or Softail models.
40-0186 VT No. Finish Lines
31-0221 40-0477 Chrome Left
Oval Oil Tanks will mount to stock or custom Softail frames 40-0476 Raw Left
right or left side belt drive applications. Tanks accept stock bat- 40-0486 Chrome Right
tery. Order bracket set separately. Fits special application for 40-0487 Raw Right
200/300 left and right side drives 37-8961 Drain Plug
VT No. Finish
40-0186 Chrome
31-0221 Brackets 40-0026
37-8961 Drain Plug 40-0025
For 1989-99 Softail

40-0393 40-0394
Center Fill Tank fits 1989-99 Softail models and features

threaded inserts on top for custom or stock mounting.
VT No. Finish
40-0025 Chrome
40-0026 Black
FXST Oil Tanks replace 62498-89A. Tanks are 4 spigot type

for 1989-99 Softail, FXST-FLST. Features factory welded 28-0539
seams and 3 quart capacity.
VT No. Finish
40-0393 Black 28-0878
40-0394 Chrome
40-0945 Drain Hose
FXST Battery Hardware for 2000-up Softail models.
40-0490 VT No. OEM Item Year
28-0878 66017-01 Strap 2001-up
28-0539 66309-84 Pad Pair
66103-74
Chrome Oil Tank fits
1982-94 FXR models.
Includes mounting
hardware and hose.
Chrome Softail Oil Tank features center fill and side wings, Replaces 62406-81.
four spigot type for 1989-99 Softail models, with three quart VT No. 40-0094
capacity with stock mounts.
VT No. 40-0490
422
40-0189
Oil Tank
for 2000-17 Softail
BIG TWIN
31-0685
40-0189 2000-17 Chrome Oil

Tank fits Softail models.
Replaces 62498-00A.
40-0191
Back VT No. Item
40-0014 Tank
31-0771 Chrome Top
Mount
31-0685 Mount Kit
40-0191 Oil Line Fitting features push in release button

for installation 2000-17.
VT No. 40-0497
40-0191 Oil Drain Plug for 1990-17 Softails

Installed to seal oil hose.
VT No. OEM Year
40-0496 40-0496 62725-90 1990-00
40-0498 40-0498 60328-98A 2001-17
Hose Retainer fits 2000-13 FXST.
VT No. Year
Round Oil Tanks fit 2000-17 Twin Cam-Softail models with side
40-0830 2000-03
fill. Tank is 6.5” diameter, 11.75” long and requires removal of
40-0831 2004-13
coil bracket and relocation of coil. Order mount kit separately. 40-0830 40-0831
Note: Will not fit rocker models.
VT No. Finish Billet Oil Drain Block allows remote
40-0191 Chrome mounting with drain plug.
40-0189 Raw VT No. 40-0485
37-8961 Drain Plug
31-0685 Mount Kit
28-0219 Cap
Mounting Hardware
FXST-FLST Oil Tank
Mount Kit includes two
(2) chrome brackets, four
(4) Iso mounts and bolts Chrome Iso
for 1984-99 mounting. Mount Kit includes
VT No. 31-0221 two (2) 1/4 — 20
Chrome Oil Tank UNC thread Iso
Mount Set features mounts and two
contour design. Fits (2) chrome billet
FXST Battery Hardware for 1984-99 Softail models. stock and custom covers.
VT No. # OEM Item Year Softail frames 1986-99. VT No. 28-0565
28-2217 A 66105-77 Strap 1984-92 VT No. Item
28-0138 B 66004-93 Clamp Pad 1993-99 40-0496 31-0754 Set
28-0136 D 66109-93 Front Strap 1993-99 31-0757 Rear Mount
28-0137 E 66111-93 Rear Strap 1993-99 Only Iso-Mount Chrome
28-0878 — Strap 2001-up Cover for black 1/4”
Oil Drain Plug for
37-8933 F 10067 Vent Clamp 50 pack
1990-00 Softails Iso studs. Pair.
28-0423 G 66210-85B Tray Insert 1986-97
28-0218 G 66210-97 Tray Insert 1998-99 to seal oil hose. VT No. 37-0877
28-0539 H 66309-84 Pad Pair Replaces 62725-
Billet Oil Drain
66103-74 90.
Block allows
Oil Tank Mount for use as center post VT No. 40-0496
remote mounting Oil Tank Mount Kit
mount when installing Softail style oil
with drain plug. includes two weld
tanks.
VT No. 40-0485 on tabs and Iso
51-0529 VT No. 51-0529
bushing and sleeve
set for top mount oil
tanks.
VT No. 51-0631
423
Sifton 40-1520
Jagg Oil Coolers feature mul-
tipass oil flow configuration,
specially designed turbulators
Dual-Cool Kit in each oil passage way, highly
concentrated mini-louvered air
40-0343 40-0347 fins and are available in deluxe,
black on chrome. Order adapt-
ers for TC-88 models sepa-
rately adapter 40-4602.
Vertical Mount
Slim Line Fits
40-1500 1982-94 FXR, 1984-up FXST
1991-17 FXD includes adapter
Horizontal Mount
40-0348 Black Fits
40-1501 2000-17 FXST without ABS Includes Adapter
Chrome Billet V-Cooler will
mount to front frame tubes as
shown. Unit is 4¹⁄₈” wide at the
top. Each tube 10.5” long and
1¹⁄₈” in diameter.
VT No. 40-0340
Sifton Oil Cooler Kit includes billet dual tube vertical oil cooler
with billet mount clamps. It measures 10” long and 4¹⁄₈” wide at Billet Clamp Sets will mount 1¹⁄₈” diameter oil
the top. Also included are stainless steel braided lines with four coolers to frames.
chrome seal ends. VT No. 40-0347 does not include or require VT No. Frame Size
an adapter. 40-0342 40-0341 1¹⁄₄”
VT No. Model
40-0343 2000-up FXST 40-0342 1¹⁄₈”
40-0344 2000-06 FXD 40-0590 1”
40-0347 1970-84 FX-FLH
40-0348 1986-99 FXST
40-0471 1998-16 FLT
Billet Twin Cooler Set features two indepen-
dent 1¹⁄₈” diameter cooler canisters with four bil-
let clamps for mounting to 1” front frame tubes.
VT No. 40-0349
40-0339 Billet Twin-Cooler Set

Combo Oil Cooler includes
feature two independent 40-0540
a 0-60lb built in gauge.
1¹⁄₈” diameter cooler can-
Chrome unit features two
isters.
billet clamps to fit 1” through
VT No. Length Finish
1.25” frame tubes.
40-0339 9” Chrome
VT No. Item
40-0805 7” Black
40-0540 Oil Filter Adapter Kit
40-0805
Adapter
Sifton Oil Filter Adapters. Chrome 40-0315 Installed
VT No. Fits Oil Filter Oil Filter Adapter
40-0709 Chrome Filter Adapter installed in the gen-
15-1520 Rubber Seal Set fits 1999-up erator position.
15-1521 Gasket (40-4600) FXD, FXST, VT No. 40-0315
FLT, FLST.
VT No. 40-0315 Installed
40-4602
40-4602
424
Oil Tank Plug and
Dipstick
BIG TWIN
40-0503 40-0361 40-0470
40-0659
40-0810
40-0668
40-0495
40-0556
Oil Temperature Dipstick
• Feature LCD read out for Softails.
• Push button for 5 second readout.
• Red light indicates extreme temperature! over 275 degrees.
VT No. Year
7354-2
40-0659 1984-99
40-0227 28-0219 40-0668 2000-06
40-0887
40-0196 40-0888
Hex Oil Dipstick.
Oil Tank Dipstick and Temperature Gauge Plugs. Stock dip VT No. Year Model
sticks also available, replaces rubber plug-in caps. 40-0887 2000-08 Softail
VT No. Type Fits 40-0888 2006-12 FXD
40-0503 Temperature Gauge 1970-84 FX-FL
40-0361 Temperature Gauge 1984-99 FXST-FLST
40-0674 Temperature Gauge White 1984-99 FXST-FLST 40-1275
40-0470 Maltese Cap 1984-99 FXST-FLST
40-0556 Temperature Gauge, White 2000-06 FXST-FLST 40-1280
40-0810 Temp Gauge, Black 2010-15 FXST-FLST
28-0219 Oil Tank Cap, Plug All models Chrome Oil Fill Dipsticks and Plugs for Softail.
40-0227 Maltese Oil Tank Cap All models VT No. Type Year
40-0495 Dipstick 1970-84 FL-FX 40-1275 Dome 2000-06
40-0196 Maltese Dipstick 1965-84 FX-FL 40-1280 Flame 2000-17
7354-2 1¹⁄₄” - 20 Thread, Hex Custom Application Plain Chrome Oil Tank Plug fits 1985-90.
40-0660 Chrome Dipsticks for FXD- Features knurled edge.
FXDWG VT No. 40-1283
VT No. Style Year
40-0660 Plain 1991-98
40-0932 Allen 2006-17
28-0219
Liquid Filled Dipstick for
40-0882
1984-99 FXST, FLST.
VT No. 40-0882
40-1279
Push In Oil Tank Plug is constructed of rubber with chrome
cap for tanks which accept a push in plug. Plug does not have
40-1288 Oil Temperature & Level a dipstick.
40-1287 Dipstick features a lighted VT No. Type 40-0685
LCD readout, Fahrenheit 28-0219 Stock, Flat
and Celsius operation and a 40-1279 Flame
replaceable battery Oil Temperature Gauge fits pre-99 Softail tank.
VT No. Fits VT No. Type
40-1284 2006-17 FXD 40-0685 Digital
40-1284 40-1287 2004-up XL 40-0895 Analog
40-1288 2000-17 FLST, FXST Oil Tank Dipstick
Chrome Black Style Fits
40-0051 40-0052 Plain 2000-up FXST, FLST
40-0053 40-0054 Plain 2000-06 FLT
40-0055 40-0056 Skull 1984-99 FXST, FLST
40-0057 40-0058 Skull 1999-05 FXD
40-0059 40-0060 Skull 2006-17 FXD
40-0061 40-0062 Skull 2007-up FLT, Plug
425
Oil Related
Oil Line/Wire Guide holds (3) 3/8” lines. 31-9000
Tie wraps may be used in conjunction
with hose guide for installation.
VT No. Finish
40-0221 Chrome, each
40-0611 Alloy Set, 2 31-9000
Chrome Oil Line To Frame Clamps available in sizes
to fit frame tubes and 5/8” outside diameter oil lines.
VT No. Size
37-9263 37-9262 1” 31-9001 31-9008
37-9263 1¹⁄₈”
37-9264 1¹⁄₄” Oil Line Separators are a neat clean way to separate and
Oil Line Clamp fits 2000-17 Softail models, replaces route any ³⁄₈” or ⁵⁄₁₆” braided or rubber oil line.
91333-06. VT No. 40-0795 VT No. Finish Hole U/M
40-0831 Hose Retainer fits 2000-13 FXST. 31-9000 Polished 2 2
VT No. Year Qty 31-9001 Chrome 2 2
40-0830 2000-03 2 31-9008 Chrome 2 2 31-9007
40-0830 40-0831 2004-13 5 31-9007 Chrome 3 1
Fitting
40-0566 40-0521
40-0519
Oil Line Fittings for ³⁄₈” hose, chrome or zinc in five pack.
Thread is ¹⁄₈” NPT. Chrome Male Fittings for gas and oil measured in NPT
Chrome Zinc OEM Type U/M thread and inner diameter of line.
40-0566 40-0635 63533-41 Straight, Replica 5 A-Straight B-90° Size
2070-1 63533-41 Straight, Replica Each 40-0525 40-0532 ¹⁄₈” NPT x ⁵⁄₁₆” Hose 40-0635
40-0519 40-0637 26496-75B 90° angle 5 40-0526 40-0529 ¹⁄₈” NPT x ¹⁄₄” Hose
40-0521 Barbed Straight 5 40-0566 40-0519 ¹⁄₈” NPT x ³⁄₈” Hose 40-0637
Oil Fittings for Big Twin. 40-0635 40-0637 As Above Zinc
VT No. # OEM Item 40-0527 40-0530 ¹⁄₄” NPT x ⁵⁄₁₆” Hose
40-0566 F 63533-41 Straight Chrome Male Female Fittings.
40-0635 As Above, Zinc VT No. # Type/Size
12-1412 A 63533-65 Oiler Return 40-9990 C 45° ¹⁄₈” x ¹⁄₈” NPT, Street Elbow
40-9982 B 63541-70 Oiler T, Rear Chain 12-1416 D 90° ¹⁄₈” x ¹⁄₈” NPT
40-0579 G Chrome Crankcase 90° 12-1419 E Straight ¹⁄₈” x ¹⁄₈” NPT
40-0552 F 26314-99 Straight 1999-up Male Plugs.
17-0519 G 62375-57 Elbow VT No. # Size
40-0553 G 63554-90 Elbow 23-0611 F ¹⁄₈” NPT, Chrome
40-0984 62601-91A Oil Pump Connector 23-0933 F ¹⁄₈” NPT, Zinc
40-0531 F ¹⁄₄” NPT, Chrome
37-8777 G ¹⁄₈” NPT Hex Socket Plug, Plain
Drain Plug
37-0095 37-0005 37-0005 VT No. OEM Size Use
40-0498 60328-98A 2001-up BT Oil Drain Plug
2007-up Primary Drain Plug
37-0005 60391-04 1999-06 FX-FXD
Magnetic Drain Plugs prevent metal particles from circulating through 2004-06 FXD, FLT FLST
engine and transmission cases, oil tank, etc. Primary Drain Plug
VT No. OEM Size Use
37-0096 707 ¹⁄₂”- 13 74 Transmission A-Drain Plug fits oil tank drain with ⁵⁄₈”-18.
37-0097 700 ³⁄₈”- 24 Big Twin Case Plug 74 and 80 VT No. Finish
37-0095 60348-65A ¹⁄₂”- 20 74 and 80 Inner Primary 8610-1 Chrome
37-0098 720, 706A ⁵⁄₈”- 18 Oil Tank and Time Hole 8611-1 Cadmium
37-8934 734-739 ¹⁄₈”- 27 NPT 1987-89 Big Twin Primary 37-9067 Washer 6700B
Transmission, FXST-FXR B-Chrome Plug with gasket fits all
37-0099 739A ¹⁄₈”- 27 NPT 1990-03 Big Twin Primary 1981-up Big Twins with ¹⁄₂ - 20 UNC thread.
37-8961 718 ¹⁄₄”- 18 NPT Chain Cover 8493-2 Plug with gasket
37-9217 722 ⁵⁄₈”- 18 FXR Drain 15-0685 Gasket only
426
Oil and Fuel Line
40-0210
BIG TWIN
Braided Stainless Hose in bulk lengths
to be cut to length as needed. Use
Compression Fitting and Hose Kit econo-seal ends or hose clamps to
includes (6) reusable compression fittings attach to fitting. Warning: Not for use in
Stainless Oil Line Kit includes 10 feet
with ¹⁄₈” NPT for oil pumps and tanks, and brake systems.
of braided hose with 3/8” inner diameter
10 feet of ³⁄₈” stainless steel braided hose. VT No. Size Length (Ft) Type
and six chrome econo-seal hose ends.
Non-reinforced. 40-0202 ¹⁄₄”¹⁄₄ 10 Non-reinforced
VT No. 40-0418
VT No. 40-0459 40-0200 ⁵⁄₁₆” 5 Non-reinforced
Fuel-Oil Line 40-0223 40-0214 40-0245 ⁵⁄₁₆” 25 Non-reinforced
in 25 feet shop 40-0210 ³⁄₈” 10 Non reinforced
rolls in black or 40-0244 ³⁄₈” 25 Reinforced
clear for fuel Chrome Econo-Seal Hose Ends act
use. 40-5010
as a clamp and finished end when the
stainless jacket rubber hose is cut. Micro
clamp is hidden under chrome end. Russell Universal Pro System Oil
VT No. Size Smooth Hex Fits Qty Lines feature a unique compression fit
40-9999 ¹⁄₈” 40-0222 40-0213 ¹⁄₄” 6 sealing system which ensures a positive
40-0117 ³⁄₁₆” 40-0248 — ⁵⁄₁₆” 6 seal on ³⁄₈” barbed type oil pump or oil
40-0118 ¹⁄₄” 40-0223 40-0214 ³⁄₈” 6 tank fittings. Constructed with stainless
40-0119 ⁵⁄₁₆” 40-0224 40-0218 ¹⁄₄” 2 braided hose and crimped on chrome
40-0254 ⁵⁄₁₆” (6 feet) 40-0249 — ⁵⁄₁₆” 2 ends. Sold each.
VT No. Length
40-0120 ³⁄₈” 40-0225 40-0219 ³⁄₈” 2
40-5010 8”
40-0253 ³⁄₈” (6 feet) — 40-0220 ¹³⁄₁₆” Inner Diameter 1
40-5017 15”
40-0126 ¹⁄₂” — 40-0591 15 mm 2
40-1252 ⁵⁄₁₆” — 40-0592 17 mm 2
Fitting
35-0413 Oil Pump/Tank
Stainless Hose Clamps are available in Fitting.
Worm Gear type. 40-0575 VT No. 40-0566
VT No. Size Type 40-0566
35-0413 ⁷⁄₃₂”-⁵⁄₈” Fuel
40-0583 35-0176
35-8031 ³⁄₈” Oil
Wyatt Gatling Polished Stainless Steel

Hose Lock is a compression fitting that
replaces conventional hose clamps. It fea-
Russell Endura Fittings feature com-
tures a cleaner appearance and superior
pression end and tapered internal nut.
sealing performance.
For ³⁄₈” inner diameter braided oil hose.
Pair Each Size
VT No. Angle
40-0584 35-0180 35-0175 ¹⁄₄”
40-0537 Straight
40-0538 45° Chrome Oil Line Fitting Set allows use 35-0181 — ⁵⁄₁₆”
of ³⁄₈” braided steel lines. The built in 35-0183* — ⁵⁄₁₆”
40-0539 90°
40-0541 Adapter Fitting compression fitting alleviates the need for 35-0182 — ³⁄₈”
clamps. Reusable three piece set. *Note: Fits S&S Super “E” carburetor
VT No. Thread Fits fitting
40-0575 ¹⁄₂” NPT TC-88
40-0583 ¹⁄₈” NPT Early
40-0584 ¹⁄₄” NPT TC-88
427
Oil Filter
40-0178
Kit
Contour Oil Filter

Bracket is ¹⁄₂”
thick with external
9821-4
fittings for 1992-99
Evolution engines.
Includes filter.
VT No. 40-0653
Chrome Housing and

Chrome Oil Filter Housing fits 1992-99 Big Twin models, Filter Kit fits 1999-
when the filter bolts to right front side of engine. 06 FLT and 1999-05
VT No. OEM Item Dynaglide models.
40-0178 Kit Chrome Housing with lines Replaces 26321-99A.
40-9958 26415-98 Chrome Housing Only VT No. Item
40-9901 — Housing Only Smooth Style 40-0177 Kit
40-9831 33519-92A Tube, Return 9938-6 Acorn Mt Kit
40-9832 33520-92 Tube, Feed 9939-6 Allen Mt Kit
40-9942 Set Above Tubes 9939-6-P Polished Allen
37-0825 10112 Tube Clamp Mt Kit
40-9957 Chrome Filter 1992-98 FXD 40-0177
40-0709 Chrome Filter 1982-98 FXST Installed
9821-4 — Mount Kit, allen
9822-4 — Mount Kit, acorn
40-9834 63530-92 Nut 31-4000
40-0093 40-0177
Big Twin Chrome Oil Canister and

Mount Brackets. Oil lines must be
fabricated and routed for installation.
Fits 1984-99 FXST, FLST.
40-0792 VT No. Item
40-9901 40-0095 31-4000 Bracket
VT No. Item 40-0095 Filter Unit
40-9901 Housing 5.5” Chrome OE Spin-On Oil Filter
40-0093 Housing with hose features a cured black resin impregnated
40-0792 Fittings paper that will remove foreign particles
V-Twin Customizer Dress Up from oil. Replaces 63813-90, fits 1991-98
Kit includes chrome covers for oil FXD. VT No. 40-0751
filter housing, tappet blocks and oil 40-0751
pump on 1992-99 Big Twin 1340
models. VT No. 42-0654 Perf-form Spin-On Oil Filter
Element for custom application.
42-0731 FXST Chrome Oil Filter VT No. 40-0431
42-0745
Housing Kit fits with frame
mount unit.
VT No. Fits 40-0431
42-0731 1989-91
42-0745 1992-99 Sifton Oil Filter Kit includes can-
40-5000 ister housing, mount plate, seals,
Oil Filter Adapter fits 1995-2017.
VT No. 40-0942 with wrench and cleanable ele-
ment.
VT No. Item
40-5000 Insert
428
Chrome Billet Oil Filter Bracket fits
1992-99 Evolution models.
VT No. 40-0594
Oil Filter Kit
BIG TWIN
Billet Oil Filter Mount fits 1992-99
Softail.
VT No. 40-0607
40-9911
40-0315 Installed
Contour Oil Filter Bracket features a long design covers oil

lines and connections. It fits 1992-99 Evolution models and
40-0315 Filter sold S&S cases and engines with similar mount holes. Filter includ-
Installed separately
ed. VT No. 40-9911
40-0098
Alloy Generator Oil-Filter 40-0952
Adapter bolts in place of
two brush generator or
40-0316 alternator Big Twin case
conversions. Use 40-0709
filter.
VT No. Item/Finish
40-0315 Adapter, Alloy Universal Oil Cooler-Filter Kit includes chrome spin on filter,
Billet Oil Drain Block allows 40-0316 Adapter, Chrome finned aluminum mount flange, with hose and clamps.
remote mounting. Includes 40-0709 Chrome Filter VT No. Item Finish
drain plug.VT No. 40-0485 40-0098 Filter Kit Alloy
40-0952 Filter Kit Chrome
40-0709 Filter only Chrome
31-2131 1” Frame Clamps
Pura-Flo Universal Clamp on Oil
Filter Kit includes filter and hose.
VT No. Item
40-0850 Kit
40-0709 Filter
Oil LineFlex Chrome Hose

Covering features
heavy gauge mylar
construction with
chrome finish and 25
feet in length.
VT No. Size
36-0552 1/4”
Sifton 1992-99 Braided Oil Line Kit
36-0553 3/8”
fits Softail models and includes stainless
36-0554 1/2” lines, seals and hardware as shown.
Custom Stainless Steel Oil Line Kit fits Replaces 63705-97.
TC-88 for custom applications. Includes VT No. 40-0651
three compression fittings and three seal
ends. Hose must be cut for installation.
VT No. 40-0467 Oil Filter Wrenches
Oil Filter Wrench with Combination Swivel-Flex Oil Filter
³⁄₈” drive fits all spin-on Oil Filter Wrenches feature gripper
filters ³⁄₈” drive. Fits Wrench teeth and a durable treated
all models including includes drain band with a vinyl covered
TC-88. plug hex at flex handle which swivels
VT No. 16-0743 opposite end. to clear frame and exhaust
VT No. 16-0451 obstructions. Replaces
Filter Wrench. 96221-80.
VT No. 16-1941 VT No. 16-0903
429
Oil Filter
40-0199 40-0836
MotorshopTM Brand Filter Packs include 6 pc of individually wrapped

and numbered chrome filters with 3” outside diameter and length as
listed.
Chrome Black OEM Type Length
40-0198 40-0836 63782-80T 82-84 FL-FX 2.5”
40-0199 40-0838 63796-77T 84-99 Softail 3.75”
40-0233 40-0839 63798-99 Twin Cam 3.25”
40-0234 40-0840 63813-90 FXD 5.5”
40-0855
Hex Nut
Spin-On Oil Filters

• Replaces stock units in chrome or black, Perf-
form or V-Twin Brand in stock or with hex nut.
• Perf-form Tall Chrome Filter is ³⁄₄” longer than
stock and will not fit fuel injected models. All fil-
Stock ters listed are low restriction type.
Perf-form Hex VT No. OEM Finish Length Fits

40-0378 40-0860 40-0708 63805-80T Black 3.75” 1980-98 FLT, 1982-94 FXR, 1984-98 FXST
— 40-0872 40-0709 63796-77T Chrome 3.75” As Above
40-0706 40-0863 40-9956 63812-90 Black 5.5” 1991-98 Dynaglide
40-0707 40-0862 40-9957 63813-90 Chrome 5.5” 1991-98 Dynaglide
40-0724 40-0855 40-0722 63798-99 Chrome 3.25” 1999-up Twin Cam
— 40-0854 40-0723 63731-99 Black 3.25” 1999-up Twin Cam
— 40-0867 40-0654 63793-01K Black 3.38” 2002-up VRSC 40-0722
— 40-0868 40-0655 63793-01K Chrome 3.38” 2002-up VRSC
Oil flows in around the outer

40-0866 Oil Out
diameter, through the filter
media and out passing by the
magnet. The magnet captures
particles less than 10 microns
Oil In
which could have escaped
through the filter wall.
Hex
Stock
MagnetekTM Oil Filters feature a magnetic ring in center tower to trap par- 40-1732
ticles less than 10 microns which could have escaped thru the filter wall. 40-1730
Available in stock style or with built in hex nut.
Hex VT No. OEM Fits Length
40-0864 40-0852 63796-77 1980-up 5-Speed Softail-FLT 3.75”
40-0866 40-0853 63813-90 1991-up Dynaglide 5.5”
— 40-0656 63793-01 2002-up VRSC 3.38”
40-0856 40-0657 63798-99 1999-up Twin Cam 3.25”
Chrome 5.5” Fram Oil Filters. K&N Spin-On Oil Filters are available in chrome or black
Fits 1991-98 Dynaglide finish. Feature hex nut end for easy removal and installation,
VT No. 40-0727 improved pressure relief valve, anti-drain back valve and heavy
duty base plate with improved rolled seal.
Chrome Black Fits Length
40-1710 40-1711 1980-98 FLT 3.75”
1982-94 FXR, 1984-98 FXST
40-1730 — 1996-98 Dyna 5.5”
40-1732 40-1733 1999-up All Twin Cam 3.25”
430
Oil Filter Kit Oil Filter
BIG TWIN
40-0100
40-0100
Installed
FXST Style Oil Filter Kit features bolt on mounting behind

shift plate. Fits Big Twin frames with 1970-up Shovel or 40-1257
Evolution engines. Can be used as an easy access auxiliary 40-1257 Installed
unit in addition to filter in tank. Bracket is replica of 1984-99
40-0798 Front Mount Filter Unit incor-
FXST type replacing 63802-84. Oil spigots are copper and
porates filter and regulator
brazed in a vacuum for lasting durability. Includes chrome fil-
mount for 1975-99 Big Twins
ter and 6 feet of rubber hose with clamps.
and 1986-99 FXST-FLST
VT No. Item
models. Includes filter, chrome
40-0100 Complete kit
billet base and hose fittings.
40-0709 Chrome filter
VT No. Item
40-0708 Black filter
Oil Filter Nipple
40-0711 Chrome Filter
with raw finish for
40-1270 Center Thread Fitting
40-1257 fits 40-0711
40-0798 Base with Hardware
filter.
As Pictured
VT No. 40-1270
Oil Change Service Kit includes chrome filter and 4 bottles of

superior Spectro Heavy Duty Lubricant.
VT No. Fits
41-0050 1984-88 FXST, 1980-98 FLT, 1982-94 FXR,
1984-up XL
41-0051 1991-98 Dynaglide
41-0052 1999-up All Twin Cam Big Twins
Developed by
40-0388 40-0387 Marty Maccolooum, 40-0096 40-0096
USA Cycles Pura-Flow Chrome Oil Filter Kit for 1936-99 Big Twins.
VT No. Fits
Sifton Oil Pre-Filters are constructed of machined alloy with 40-0096 Kit
a #40 mesh screen installed to trap large debris and a circular 40-0709 Replacement Filter
magnetic collar to collect the ultra fine ferrous particles before
they reach the engine. Unit can be installed in the following 40-0091
locations for 3/8” inner diameter oil line:
• Supply line before the engine on all models
• Primary scavenger return line on Early FLH and FX models
• Return line to oil tank on FL-EL-UL and models without a fac-
tory filter
• External oil return on high performance heads.
• Any pressure supply or return (use the prelifter with the ¹⁄₈”
NPT body).
The ¹⁄₂” unit recommended for Softail TC-88 models on the
path between the cam bearing housing and oil pump.
VT No. Type Hose
40-0388 ¹⁄₈” NPT Body ³⁄₈”
40-0387 Barbed end ³⁄₈”
Oil Line Filter Kit includes filter and
Oil Filter Kit to fit 1970-84 Big Twins nose cone engines
compression fittings for ³⁄₈” stainless steel
when using an outside frame front pipe. Mounts under front
hose.
engine mount.
VT No. 40-0462
VT No. Item
40-0091 Chrome Housing & Bracket Kit
40-0093 Chrome Housing
40-0093
431
Oil Gauge
A B 40-0585
40-0585
40-0500
40-0586 40-0586
40-9906 40-0569
40-0569 40-0571 40-0385
Sifton Big Twin Oil Pressure Gauge Kit for 1984-99
Liquid Filled 1¹⁄₂” Oil Pressure Gauges feature a weather Evolution models includes a 1¹⁄₂” liquid filled 0-60 lbs gauge
resistant sealed lens, stainless steel case, chrome rim and and chrome fitting. Kit is available with or without oil pressure
extra heavy mechanism. The liquid filled face eliminates nee- switch sender provision.
dle bounce giving a constant reading. All gauges have ¹⁄₈” VT No. Type
NPT male rear fitting. 40-0585 With oil pressure switch fitting hole
VT No. # Pounds Face Brand 40-0586 Without oil pressure switch fitting hole
40-9906 0-30 Black V-Twin
40-0500 A 0-60 White AEE Chrome Oil
40-0569 0-60 Silver Sifton Gauge Cover is
40-0571 0-60 Blue Sifton machined of alloy,
40-0382 B 0-60 Black Accel with square hole
40-0386 0-60 Black V-Twin in bottom.
40-9907 B 0-100 Black Accel VT No. 40-0448
40-0385 0-100 Black V-Twin
Oil Cooler
40-0305
40-1523
40-1516 40-1518
40-0306 40-0306 Installed 40-1524

40-1525
Sifton Oil Cooler replica style in black Sifton Slim Line 6 Row Oil Cooler.
or chrome. Order bracket separately. Chrome Black Fits Type
VT No. Finish 40-1518* 40-1516* 1982-94 FXR, Vertical
40-0305 Black 1991-17 FXD,
40-0306 Chrome 1984-13 FLT,
1984-17 Softail
40-1524* 40-1523* 1982-94 FXR, Horizontal
1984-17 FXST,
1991-17 FXD
31-0154 31-0420 31-3976 Deluxe
40-1525* — 1984-17 FXST, Vertical
Brackets fit Sifton and Lockhart oil cool- 1984-13 FLT,
ers. 31-1253 1991-17 FXD
VT No. Year Model *Note: All 1999-2017 requires separate purchase of 40-4602 oil
31-0154 1960-84 FX-FL filter adapter.
31-0420 1986-99 FXST
31-3976 1982-94 FXR
31-1253 1997-08 FLT
432
40-0791 Installed Oil Gauge Kit
BIG TWIN
40-9970 40-9971
40-9977
40-9905
40-4004 40-0791
Rocker Box Mounted Oil Gauge fits 1984-99 1340 Evolution

Big Twin models. Kit includes a complete liquid filled gauge,
chrome steel line and hardware for installation. The kit is also
SiftonTM Rocker Box Oil Pressure Gauge Kits feature a
available with lower fitting allowing stock oil pressure sender
0-60 lb liquid filled pressure gauge and a case fitting which
unit to be retained in conjunction with oil pressure gauge.
allows retention of oil pressure switch for indicator lamp.
VT No. Item
Chrome bracket, screw to mount to head and stainless steel
40-0791 Mini Kit
line included.
VT No. Fits
40-9985 Line and Bracket Kit
40-9970 1984-99 Evolution
40-4004 Complete Kit with Sender Adapter
40-9971 2000-08 Twin Cam
37-8963 37-8964 37-9008
40-9905 Bracket
40-0589
Chrome Oil Gauge Fitting allows use of oil gauge or com- 40-0879
bining of a gauge and stock light switch unit. Mini Oil Gauge Kit for 1984-99 Evolution Big Twin. Includes a
VT No. Item 1” mini gauge and chrome fitting.
37-8963 Oil Gauge Fitting VT No. Year Type
37-8964 Gauge Switch Fitting Chrome 40-0879 1984-99 Evolution
37-9008 Gauge Switch Fitting Polished 40-0589 ¹⁄₈” NPT Gauge Only
40-0573
Twin Cam Oil Pressure Gauge Kit features oil filled gauge,
chrome mounting bracket and all necessary mounting hard-
ware. Fits all 1999-05 Dynaglide and 2000-up Softail models.
Replaces 75133-99.
VT No. 40-0558 40-0576
39-0786 Shown
Rocker Box Mounted Oil Gauge Kit fits 1984-99 1340

Evolution Big Twin models. Kit includes a complete liquid filled
gauge, chrome steel line and hardware for installation. Kit is
39-0785 39-0788 available with lower fitting allowing stock oil pressure send-
er unit to be retained in conjunction with oil pressure gauge.
Chrome Billet Handlebar Assemblies fit ⁷/₈” or 1” handlebars.
VT No. Fitting Type
VT No. Item
40-0573 Without Oil Pressure Sender
39-0785 Clock, ⁷/₈” or 1”
40-0576 With Oil Pressure Sender
39-0786 Outside Temperature Gauge, 1”
32-0429 Sender Only
39-0788 Clock with glow in dark hands, ⁷/₈” or 1”
433
Outer Primary Cover
F G 43-0249
N P
H
43-0239 43-0240
43-0370 Chrome Big Twin Outer Primary Covers are from new die cast tooling to replace stock
parts. Kits include chrome primary cover, chrome allen screws, outer cover starter bear-
ing and gaskets for derby, inspection and outer covers. All other covers are sold as cover
only. Part number for screw kit given for reference only.
# VT No. OEM Fits/Type Chrome
Allen
Chrome
Allen Screw
5 Speed FXR-FLT Screw Kit Kit
F 43-0209 60665-85B 1985-88 FXR-FLT 8916-17 8916-17T
43-0340 Kit 1985-88 FXR-FLT
43-0560
G 43-0232 60665-89
43-0341 Kit
1989-93 FXR-FLT
1989-93 FXR-FLT
8916-17 8916-17T
43-0560* 60665-94 1994 FXR, 1994-98 FLT 8916-17 8916-17T

I 43-0248 60665-99
43-0276 60665-99
1999-06 FLT, Replica
1999-06 FLT (V-Twin)
9959-38 9959-38T
9959-38 9959-38T
43-0249 Kit 1999-06 FLT
43-0782 Kit 2007-15 FLT 2402-18 2402-18T
43-0883 ET 2007-15 FLT 2402-18 2402-18T
Q 43-0001 Chrome 2017-up FLT M-8
43-0000 Gloss Black 2017-up FLT M-8
5-Speed FXST-FLST-FXD
43-0000 J 43-0199 60543-86A

43-0343 Kit
1986-88 FXST-FLST
1986-88 FXST-FLST
8916-17 8916-17T
K 43-0198 60543-89
43-0344 Kit
1989-93 FXST-FLST-FXD
1989-93 FXST-FLST-FXD
8919-19 8919-19T
43-0224 1994 FXST-FLST-FXD 8919-19 8919-19T

M 43-0345 Kit
43-0211 60543-95
1994 FXST-FLST-FXD
1995-98 FXST-FLST-FXD V-Twin 8919-19 8919-19T
Q 43-0370 Black 1995-98 FXST, Black
43-0346 Kit 1995-98 FXST-FLST-FXD
N 43-0239 OE 1999-06 FXST-FLST-FXD 8919-19 8919-19T
2342-18 P 43-0240 60543-99

43-0332 Black
1999-06 FXST-FLST-FXD V-Twin 8919-19 8919-19T
1999-06 FXST-FLST-FXD 8919-19 8919-19T
43-0280 Kit 1999-06 FXST-FLST-FXD
Die Cast Primary Covers are manufactured from a cast- 43-0347 Kit 1999-06 FXST-FLST, 99-05 FXD-
ing process. It is the nature of parts produced from this
process to have small random subsurface imperfections FXWG
that can be uncovered during the polishing process.
These may appear as very small cosmetic imperfections
43-0359 60764-06 2006-17 FXD 2342-18 2342-18T
after chrome plating. We also do not polish in areas that 43-0360 60782-06 2006-17 FXDWG, 2007-17 FXST 2342-18 2342-18T
are not readily visible once assembled on the motorcycle
or by polishing machines such as small depressions 43-0369 Black 2007-17 FXST, Black
or tight corners. As these conditions are common in
polished and chrome-plated castings, a reasonable stan-
43-0373 Black 2007-17 FXD, Black
dard of acceptability has been established to bring you *Note: Requires a 5 hole 1990-up type derby cover
the highest quality product at an affordable price. This
part meets Perma Chrome™ cosmetic standard. The
aforementioned cosmetic conditions are considered rea-
sonable for this part and are not considered warrantable.
434
K Outer Primary
Note:
BIG TWIN
I Big Twin
Outer
Primary
Covers
are from
new die
cast tool-
ing to
M replace
stock
parts. Kits
J include
chrome
primary
cover,
chrome
allen
43-0345 screws,
outer
cover
P starter
bearing
and gas-
kets for
derby,
inspection
and outer
covers.
All other
covers are
43-0359
sold as
43-0341
cover only.
43-0360
43-0000
43-0432
Outer Primary Cover for M-8, 2017-up FLT, gloss black finish.
VT No. 43-0000
Die Cast Primary Covers are manufactured from a casting process. It is the nature of parts produced from this process to have small random subsurface imperfections that can be uncovered during
the polishing process. These may appear as very small cosmetic imperfections after chrome plating. We also do not polish in areas that are not readily visible once assembled on the motorcycle or
by polishing machines such as small depressions or tight corners. As these conditions are common in polished and chrome-plated castings, a reasonable standard of acceptability has been estab-
lished to bring you the highest quality product at an affordable price. This part meets Perma Chrome™ cosmetic standard. The aforementioned cosmetic conditions are considered reasonable for
this part and are not considered warrantable.
435
Primary Cover Kit 43-0264 43-0288
43-0250
43-0289 43-0265
VT No. VT No. Year Model

With Without
Derby Derby
43-0264 43-0347 1995-06 Softail
1994-05 FXD-FXDWG
43-0288 2006-17 FXD
43-0251 43-0289 2006-17 FXDWG
2007-17 FXST
43-0265 43-0249 1994-06 FLT
Chrome Primary Cover Sets are for Softail models. Set 43-0294 2007-15 FLT
includes die cast and chrome inner and outer primary cover. 43-0267 43-0341 1989-93 FLT-FXR
VT No. Fits Hardware 43-0272 43-0340 1985-88 FLT-FXR
43-0250 1990-93 15-0782 42-0740 Inspection FLT
43-0251 1994-99 15-0779 42-9943 Inspection FXR
Outer Vented Primary Kit

Vented Primary Cover
Kits include vented inspec- 43-0257 43-0252
tion and derby covers with
screws for Softail models.
VT No. Year
43-0562 1989-93
43-0563 1994-05 Dynaglide
1994-06 FXST
43-0563 Installed
Chrome Vented
Primary Covers
fit Softail and FXD
models. All parts
sold separately.
VT No. Year
43-0113 1989-93
43-0179 Oval 43-0290
Chrome Vented Outer Primary Covers are without bearing

installed.
VT No. Year Model
43-0252 1989-93 FXST
43-0257 1994-06 FXST-FXD
43-0290 1995-06 FXST (3 Hole)
436
43-0174
Inner Primary
FXR-FXST-FLST
BIG TWIN
43-0175
43-9179 43-0176
43-9139 43-9145
FLST-FXST Heavy Duty Inner Primary Cover features waffle 43-0229 43-0233
reinforced design.
VT No. Finish Year
43-0162 Chrome 1990-93
43-0174 Polish 1990-93 43-9143
43-0175 Chrome 1994-06 Cast Inner Primary Covers available in chrome, cast or pol-
43-0205 Chrome 1994-06 ished finish.
43-9179 Chrome 1994-06 VT No. OEM Finish Fits
43-0176 Polish 1994-06 FXR 5-Speed
Note: 43-0205 include all hardware except bearing. 43-0233 60222-90 Cast 1990-93 FXR
FXST-FLST 5-Speed
43-0292 43-9139 60630-90 Chrome 1990-93 FXST
43-9143 60630-90 Polished 1990-93 FXST
43-9145 60630-94A Chrome 1994-06 FXST
43-0229 As Above Polished 1994-06 FXST
43-0175 As Above Chrome 1994-06 FXST Heavy Duty
43-0244 43-0245 1994-06 FLST
43-0690* Bushing Starter Shaft Spiral
Chrome Inner Primary Cover Assemblies feature mainshaft *Note: Allows 1994-99 Inner Primary to be installed on 1990-98
bearing, starter bushing and starter shaft seal installed in cover. models
VT No. Year Models
43-0244 1990-93 FXST-FLST 43-0269
43-0268
43-0245 1994-06 FXST-FLST
43-0292 2008-17 FXCW
For FXD-FXDWG
Does not include bearings, bushings or seals.
43-0279 43-0286
43-0258
Chrome Inner Primary Cover Assemblies include bearings,

bushings and seals. Installed.
VT No. Year/Model
43-0268 1994-00 FXDWG
43-0269 1994-00 FXD
43-0258 2001-05 FXD
43-1050 43-1055 Inner Primary Adapter Plate
features a natural machined finish.
Adapter plate allows 1970-2005
inner primaries to fit 2006-up
TC-96 and 103 “A” motors.
VT No. 43-0671
Offset Inner Primary Cover

43-0279 V-TwinTM Offset Inner Primary Covers for 1994-2003 Softail
feature chrome finish with reinforcing webs for added strength.
Available in offsets for fat tire and wide frame applications. Uses
Chrome Inner Primary Covers Only. Order bearing, bushing 1994-2003 primary component, sold separately.
and seal separately. VT No. Offset
43-0279 1994-00 FXDWG 43-0452 .500”
43-0286 1994-00 FXD 43-0453 .750”
43-1050 2001-05 FXD 43-0454 1.00”
43-1055 2001-05 FXDWG 43-0455 1.25”
43-0690 Bushing
437
Primary 42-0036 42-0605 42-0991 42-0958 Maltese 42-0959
Derby Cover
Red Baron Maltese
42-0091 42-0092 42-0578 42-1057 42-0102 42-0616 42-9965
42-0579 42-0747 42-0922 42-6070 42-6025 42-1086 42-1087
Raised Maltese Raised Maltese
42-1090 42-1073 42-1074 42-0632 42-0120
Order
gaskets
and screws
42-0129 separately.
42-0580 42-1081 42-0470 42-0467 42-0466 42-0471
42-1543 42-1118 42-1120 42-0194 42-0190 42-0195 42-0191
42-0124 42-1373 42-1029 42-0196 42-1387 42-1388

42-0198
3-Hole 5-Hole Style Finish 42-1086 42-1088 Ball Milled Chrome 42-1380 42-1373 Air Flow Black
42-0036 — V-Tech Chrome 42-1150 — Ball Milled Black 42-1029 — Smooth Dome Chrome
42-0605 — Dome Chrome 42-1087 42-1091 Contour Black — 42-1387 Nostalgic Chrome
— — Red Baron Chrome 42-1090 42-1089 Perforated Chrome — 42-1388 Nostalgic Black
42-0991 42-0975 Iron Cross Chrome 42-0470 42-0466 Flame Chrome 42-0238 42-0240 C-Thru Chrome
42-0958 42-0959 Maltese Chrome 42-0471 42-0467 Flame Black 42-0239 42-0241 C-Thru Black
42-0579 42-6026 Iron Cross Chrome — 42-0222 Raised Skull Chrome 15-0125 14-0809 Gasket
42-0091 42-0092 Skull Chrome — 42-1543 Contrast Black — 37-0831 Screws
42-0558 42-0559 Skull Black 42-1118 — Contour Black 37-8868 — Nylon Washer
42-0578 42-1057 Bonehead Chrome — 42-1120 Perforated Black
42-0107 42-0950 Eagle Spirit Chrome 42-0194 42-0190 Smooth Chrome
42-9944 42-0849 Eagle Spirit Gold Inlay 42-0195 42-0191 Smooth Black
42-0102 — Finned Polished 42-0108 — 3-D Spinner Chrome
42-0616 — Ventilated Chrome 42-1118 — Contour Black
42-9965 — Retro Bird Logo Chrome 42-7102 42-0120 Smooth Chrome
42-6070 42-6025 Maltese Raised Chrome 42-0102 — Finned Polished
42-0747 42-0922 Flame Chrome 42-0091 — Skull Chrome
42-1073 42-1074 Lady Luck Chrome 42-1075 — Flame Chrome 42-2025 42-2026
42-0632 — Finned Black — 42-1140 Ball Milled Black
— 42-0120 Smooth Chrome — 42-1144 Grooved Chrome
Chrome Holey Derby Covers with black
— 42-0129 Smooth Chrome — 42-1145 Grooved Black mesh inlay.
— 42-0124 Smooth Chrome 42-1142 42-1141 Grooved Chrome VT No. Hole Year
42-0580 42-1081 Skull Black 42-1379 — Air Flow Chrome 42-2025 3 1970-99
42-2026 5 1999-16
438
42-0740 42-0944 42-9943
Inspection
42-0739
BIG TWIN
42-9927
42-0049
Chrome 5-Speed Inspection Covers are available with or
without shifter hole.
Without Shift Hole Years Model 42-0610 42-0826
42-0740 1985-06, 1985-94 FLT, FXR
42-0944 Flame FLT, FXR
With Shift Hole
42-9943 1985-94 FXR
42-0049 1985-94 FXR
10-2488 1985-94 Bushing Sleeve
10-0769 1982-84 Bushing Set 42-1009 42-1274
42-0002 42-0040
V-Tech Covers feature allen screw styling in deluxe chrome
die cast metal.
42-0476 42-0477
VT No. Item
42-0002 Oval
42-0040 Oval with FXE shift hole
42-0817 Installed 42-0816
42-0188 42-0187
Chrome Flame Derby and Inspection Oval Set. Screws included.

VT No. Year/Model
42-1270 42-1271
42-0817 1965-98 FL and Softail
42-0816 1999-up FXST, FLST
1999-05 FXD, 1999-14 FLT
Chrome Flame Cover Set fits
1986-98 FLST,1984-98 FXST Inspection Ovals for alloy primary covers.
The set contains three pieces. Chrome Black Type
VT No. 42-0743 42-9927 — 1986-06 FXST, 1993-05 FXDWG, Smooth
42-0739 — 1990-05 FXD
42-0743 42-0610 — 1986-06 Softail, Smooth
42-0826 — 1986-06 Softail, Flywheel
Primary Derby Gasket Kit used to 42-1008 — 1970-86 Softail, Bonehead
replace gaskets — 42-1274 1991-05 FXDWG
and seals after 42-0476 42-0477 1999-up FL, FX
clutch and primary chain adjustment 42-0188 42-0187 1999-up FL, FX
on Big Twins. 42-1270 42-1271 1984-06 FXST, FLST, FXD
15-1506 VT No. James Year Holes
15-1507 15-1383 1999-06 5-Hole
15-1506 15-1384 1970-98 3-Hole Vented Covered Sets
Chrome 3-D Derby Cover features concealed
mounting by use of plate which installs like a
derby cover. The 3-D spinner cover mounts to
stud on plate and held firmly in place by O-ring. 42-1225
The red backing plate can be painted to match 42-1226
color scheme. VT No. 42-0108
Chrome Oval and Derby Kit
VT No. Item
42-1226 V-Twin Vented
42-1225 Billet Vented
439
Primary Gasket Kit 15-0875 15-0865
15-1630 15-0888 15-1631
James Primary Kits include beaded outer gasket.

Paper Foamet® Fits
15-0865 — 1984-88 FXST No Seals
15-0866 15-1335 1984-88 FXST, FLST
15-0869 — 1980-84 FXR-FLT (.062” Thickness)
15-0870 — 1985-93 FXR-FLT (.062” Thickness)
15-0868 15-1332 1989-93 FXST, FLST, 1991-93 FXD
15-0671 15-1633 15-0672 15-0875 15-1331 1994-05 FXR-FLT
15-0876 15-1333 1994-06 FXST, FLST 1994-05 FXD
15-0673 15-0768
15-0876 — 1994-06 FXST-FLST-FXD
15-1264 — 2006-up FXD, 2007-up FXST, FLST
— 15-1426 As Above With Silicone Beading
15-1633 15-1396 15-1334 2005-06 FLT
15-1397 15-1430 2007-16 FLT
15-0368 Oil Change O-Ring Kit includes primary cover
15-1515 and drain plug O-rings for 2006-up models.
VT No. 15-1511
14-0531 15-1511 15-1286

15-1634 15-0369 15-1509
GB Big Twin Primary O-Rings.

Inner Case to Engine
VT No. OEM Year
GB Primary Cover Gasket Kit contains all 14-0531 11147 1983-99
the necessary gaskets and hardware when 15-1286 Derby Cover to Outer Primary
making inner primary repairs, primary 14-0535 25416-84 1985-98
chain, clutch hub, clutch or left side trans- 14-0809 25416-99 1999-up
mission repairs. One part number covers 15-1511 17369-06 2006-up FXD
15-1566 all necessary parts. Available with paper 15-1286 25416-99 1999-up Beaded
type gaskets that have Silicone Beading or
15-1277 5 Holes Molded Rubber
Aluminum with Rubber Coating.
Aluminum Silicone Year Speed Model 15-0223
W/Rubber Bead
15-1630 15-0888 1984-88 4-5 FXST
15-1631 15-0671 1985-93 5 FLT-FXR 15-1525
15-1632 15-0672 1986-89 5 FXST 15-1282
15-1633 15-0673 1990-93 5 FXST-FXD (10 piece)
— 15-0768* 1990-93 FXST-FXD (15 piece)
15-1634 15-0368 1994-06 5 FXR-FLT GBTM Inner Primary Repair Gasket Kit includes gasket to
15-1635 15-1513 2007-16 6 FLT replace O-ring seal when the lip of the engine is partially or
15-1636 15-1515 2007-16 6 FLT As Above, entirely broken off. To avoid machining and welding, grind the
Outer Gasket Kit Only partially broken lip smooth and install the gasket. Special lock
15-0072 15-1566 2017-up FLT
and bolts included. VT 15-1525 is a metal gasket only.
15-1637 15-0369 1994-06 5 Softail
1994-05 5 FXD VT No. Years Models
15-1638 15-1509 2006-17 6 FXD 15-0223 1970-90 FX-FL
2007-17 6 Softail 15-0381 1990-05 FX-FL
*Note: Does not have beaded gaskets. 15-1525 2006-up FXD-FLT
Acorn
ScrewAllen Cap
2007-up FLST-FXST
James Inner Primary O-Ring Saver Kit replaces stock type
O-ring with a gasket. Used for repairing damaged crankcase
O-sealing lip. Available with a silicone beaded metal gasket or
a foam rubber coated gasket. Includes lock tab.
Chrome Screw Kits for Big Twin primary covers. 1984-up Evolution and Twin Cams
Acorn Cap Allen Fits VT No. Item
7350-15 — 8762-17 1984-85 FXST 5-Speed 15-1282 Metal Beaded
— — 8762-17T 1984-85 FXST 5-Speed 15-1283 Metal Foam Rubber
— 8915-17 8916-17 1985-99 All 5-Speed FXR-FLT
8917-19 8918-19 8919-19 1989-06 FXST, 1991-05 FXD Primary Bolt Sealing Washers
— — 2342-18 2006-up FXD, 2007-up FXST VT No. OEM Type
9958-19 — 9959-38 1999-06 FLT 37-8868 31433-84A Nylon washer
440 37-8931 31433-84A Washer with O-ring
15-0781 15-0779
Primary Hardware
BIG TWIN
15-0782
37-8668
Aluminum Inner Primary Mounting Kits contain all stock type
hardware for mounting aluminum inner chain housing on all Big
Twin.
VT No. Fits
37-8668 1985-88 FXST
1994-up Inner Primary Hardware and Gasket Set for Softail
9904-17 1986-94 FXR, 1986-00 FLT
models. Set includes all parts shown including bearing and
9870-16 1986-93 Softail and Dynaglide, Colony
inner sleeve. VT No. Year 9873-16 1994-99 As Above
VT No. Year 15-0779 1994-06 17-0946 1987-90 Lock Tab Only
15-0781 1986-89 15-0784 2007-up 37-8803 1971-84 Bolt with Wire Hole
15-0782 1990-93
17-0928 1985-17 Big Twin, Lock Tab
A B 12-0357 17-9941 Shift Shaft Primary Plug for use when
forward controls are installed on FXR-FXD
models to seal the inner primary when
eliminating the mid shift. Includes O-Rings
12-9935 and hardware.
Late 1984-17 Big Twin Inner Primary Bearing supports VT No. 17-0650
transmission mainshaft at inner primary area. Available in 1970-up Big Twin Inner Primary
OEM floating style roller bearing Type (B) which requires Lock Tab. One piece design elimi-
purchase of the inner sleeve, 17-9941. Type (A) is the double nates need for safety wire. Sold as a 5
sealed ball bearing style which does not require the sleeve. pack. VT No. 17-0937
VT No. Type
12-9935 Sealed Ball Bearing (A)
12-0357 Stock Roller Bearing (B)
12-1279 Bearing Only, 2007-17 (B)
17-9941 1984-05 Sleeve
Stepped Inner Primary Bearing Race for 17-0871
all 1991-05 Big Twins features an extra step
on the inside diameter that acts as a stop on 17-0870
the transmission mainshaft. When the race is
pressed on the shaft the step will not allow the
race to move inward toward mainshaft seal.
VT No. 17-0465
12-9755 12-0589 12-0591 17-0870

12-1198 Inner Primary Bearing Kit for Late 1985-up Big Twins
includes bearing, seal, two snap rings and one inner race.
1985-93 1994-05 2006-07 2008-up
Late 1984-06 Inner Primary Hardware fits Big Twin 5 Speed 12-0589 12-0591 17-0871 17-0873
FXST-FLST. 17-0870 1985-05 Bearing/Sleeve
VT No. # OEM Item
12-9755 A 9135 Bearing
14-0159 B 12052 Seal, 1985-up, 5 pack
12-0969 C 60678-85 Retaining Ring
10-8527 F 33445-89 Bushing Starter Shaft Inner, 1989-93
10-8548 F 33445-94 As Above, 1994-up
14-0920 E 12053A Seals, 1989-93, 5 pack 12-0318 10-8528 10-8549 10-2488
14-0961 E 12066 Seal 1994-up Outer Primary Cover Bushing/Bearing presses in outer pri-
12-1198 H 221 Pin, Dowel,1984-up FLT, FXR mary cover to secure end of starter shaft.
10-8528 G 33446-89 Bushing Starter Outer VT No. OEM Years Type
10-8549 G 33446-93 As Above, 1994-up 12-0318 9063 1965-88 Needle Bearing
12-1253 H — Transmission Dowel Pin 10-8528 33446-89 1989-93 Bushing
12-1172 H — 1986-06 FXST-FLST 10-8549 33446-94 1994-up Bushing
10-2488 34632-84B 1984-94 Bushing (FXR)
441
Front Axle 44-0003
44-0955
44-0359 44-0004
44-0005
44-0696
44-0746 44-0004 End Detail
44-0084 44-0936
44-0935
44-0695
Chrome Flush Mount Front Axle Kits.
VT No. Year Model
44-0208 44-0003 1988-99 FXR-FXD (39mm)
44-0004 1984-99 FXST-FXDWG
44-0005 1986-06 FLST
44-0793
Front Axle Nut replaces 7734W, ¹⁄₂ x 20 threads,
zinc.
44-0086 VT No. Type
44-0307 Each
44-2013 5 pack
44-0614 Pike Front Axle Nut Kit fits 1972-
up WG, 1984-up Softail models
and 39mm FXR and FXD.
VT No. 2263-2
44-0685
2263-2
Axles have chrome plated ends. This is bare axle only. Installed
VT No. OEM Fits
44-0084 41584-86 1987-06 FLST-FLSTF
44-0695 41545-07 2007-17 FLST
44-0208 43346-83B 1993-05 FXDWG
44-0793 41547-07 2007-17 FXST 37-0036 37-8918
44-0086 43895-87 1988-99 FXR
44-0614 43895-00 2000-05 FXD
44-0685 43758-04 2004-05 FXD
44-0699 40928-06 2006-07 FXD
44-0747 41628-08 2008-17 FXD
44-0746 41348-08 2008-17 FXWC 37-0991 37-0999
44-0793 41547-07A 2008-17 FXDF Big Twin Front Axle Cap Cover Sets include right and left
44-0691 40936-06 2006-17 FXDWG (1”) caps with set screws for glide type forks. Chrome.
44-0955 43354-00 2000-06 FXSTD VT No. Year/Models
44-0696 41549-07 2007-17 FXSTD 37-0036 1972-06 FXDWG, FXST, FXD, FL, FLST, FLT, FXR
44-0208 43346-83B 1984-06 FXST 37-8918 1988-17 FXSTS
44-0207 43863-84 1984-86 FXE 37-0991 1984-06 FXST
1986-87 All XL-XLS-FXR-FXRS 37-0999 2007-17 FXST
44-0083 41109-88 1988-17 FXSTS
44-0358 41116-97 1997-03 FLSTS
44-0599 Chrome Front Axle Nut Kits.
VT No. Model
8768-3 1973-up FX-XL
8769-3 1972-up FLH and WG
44-0599 1972-up WG
1984-99 FXST Pike Front Axle fits 41mm fork legs.

VT No. 44-0229
442
Chrome Front Axle Kit
44-0579
BIG TWIN
44-0578
44-0572
44-0675
44-0580
44-0673
44-0795
44-0630
44-0084
44-0699
44-0617
44-0083
C
G 44-0086
H 44-0615
J 44-0794
Chrome Front Axle Kits include plated axle, nuts, spacer, and hardware.

Year/Model Kit Spacer Nut Kit Axle # Fork mm Outside
Diameter
1980-83 FXWG, 44-0572 44-0297 8769-3 44-0208 C 41 .750”
1984-06 FXST
2007-17 FXST 44-0795 2391-7 2391-7 44-0793 41 25mm
2000-06 FXST-FXDWG 44-0613 2022-5 2022-5 44-0208 C 41 .750”
2008-17 FXDWG — 2515-5 2515-5 44-0691 C 49 1.00”
1984-86 FXE, 44-0577 — 8768-3 44-0207 G 35 .750”
1986-87 FXR-FXRS
1988-99 FXR-FXD 44-0578 — 8769-3 44-0086 H 39 .750”
2000-2003 FXD 44-0614 2028-5 2028-5 44-0614 H 39 .750”
2004-2005 FXD — 2256-5 2256-5 44-0685 H 39 1.00”
2006-07 FXD 44-0798 2339-5 2339-5 44-0699 H 49 1.00”
1988-96 FXSTS 44-0579 44-0546 — 44-0083 I — .750”
37-8564* *Washer for above
2000-up FXSTS 44-0615 2032-4 2032-4 44-0083 I — .750”
1987-95 FLST-FLSTF 44-0580 44-0293 8769-3 44-0084 J 41 .750”
1996-99 FLSTF 44-0586 44-0291 8769-3 44-0084 J 41 .750”
1996-99 FLST 44-0587 44-0373 8769-3 44-0084 J 41 .750”
2000-06 FLST 44-0612 2034-4 2034-4 44-0084 J 41 .750”
2000-06 FLSTF 44-0630 2029-5 2029-5 44-0084 J 41 .750”
2007-17 FLST 44-0796 2390-5 2390-5 44-0695 41 25mm
2000-05 FLSTS 44-0631 2388-5 2388-5 44-0358 J — .750”
1997-99 FLSTS 44-0939 2864-5 2864-5 44-0358 K — .750”
2000-06 FLSTS 44-0740 2388-5 2388-5 44-0358 K — .750”
2007-17 FXSTD 44-0843 2389-7 2389-7 44-0696 K 41 25mm
2006-06 FXSTD 44-0617 44-0621 2033-4 44-0955 K 41 .750”
443
Front Axle Spacer
44-0651 44-0799
9823-3 2389-7
Front Axle Spacers

Chrome Zinc Side Fits
44-0651 44-0297 Right 1984-85 FXWG
Right 1984-99 FXST
— 44-0546 Right 1988-96 FXSTS
— 44-0550 Right 1997-99 FXSTS
— 44-0553 Left 1997-99 FLSTS
44-0369 44-0368 Left 1997-99 FXD-FXDL
44-0372 44-0350 Left 1996-99 FLSTF
44-0650 44-0293 Left 1986-95 FLST
44-0661 44-0291 Right 1989-94 FLSTF
2021-5 2022-5 44-0373 44-0352 Left 1996-99 FLST
— 44-0628 Left 2000-06 FXST-FLST-FXSTS
— 44-0956 Left 2000-06 FLSTS
— 44-0956 Left 2000-06 FLSTS
44-0811 — Right/Left 2007-15 FLST
2007-10 FXST
44-0799 — Right/Left 2007-up FXST 25mm
44-0116 Smoothie Spacer Set fits front axle.
2029-5 2030-5 Fits 2000-06 FLST. ³⁄₄”
VT No. 44-0116
2029-5
Front Wheel Seal Spacers sold each.
44-0296
2390-5
Chrome Front Axle Spacer, Washer and Nut Kits. VT No. Side Fits
Smooth Groove Fits 44-0306 Left 1978-95 FX-FXE-FXEF
FXSTS FXEF-80, 1982-83 FXR-FXRS-FXRT
— 9823-3 1988-96 44-0296 Left 1984-99 All FXR models
9999-3 — 1997-99 1984 FXE-80, 1985 FXEF
2032-4 — 2000-up 44-0297 Right 1984-86 FXWG 1984-99 FXST
FXST-FXDWG 44-0291 Right 1988-99 FLSTF
9826-4 — 1984-95 44-0293 Left 1986-99 FLST
9991-5 9990-5 1995-96 44-0350 Left 1996-99 FLSTF
9993-5 9992-5 1997-99 44-0352 Left 1996-99 FLST, Left Fitment
2022-5 2021-5 2000-06 44-0628 Left 2000-06 FXSTD
FXST 44-0925 Right 2000-06 FXSTD
2391-7 — 2007-up
FXDWG 44-2019 Chrome Inner Hub Cover
2337-5 — 2006-07 fill area between pulley
2339-5 — 2006-07 or rotor mount flange and
2515-5 — 2008-up spoke hole flange on hub
FXSTD for smooth appearance
2389-7 — 2007-up and ease of cleaning. Front
FLST-FLSTC models fit rotor side, rear kit
9826-4 — 1984-95 fits both sides Fits 1987-93
2034-4 2033-4 2000-06 FXST.
2390-5 — 2007-up VT No. 44-2019
FLSTN
2390-5 — 2007-up
FLSTF
9923-5 9924-4 1990-95
9923-5 9922-5 1996-up
2030-5 2029-5 2000-06
FXD
2028-5 — 2000-03
2256-5 — 2004-05
2339-5 — 2006-07
2514-5 — 2008-up Except FXDWG, FXDF
444 444
Rear Axle Kit
44-0547 44-0633 44-0694
BIG TWIN
44-0548
44-2001
44-0713
44-0620
44-0219
44-0150
44-2014
44-0765
44-0893
44-0681
Rear Axle Kits include chrome axle, nuts, sleeves and spacers for Rear Axles are available in chrome or zinc
each application. Nut kit includes axle nuts in chrome. Fits belt drive. Chrome Zinc OEM Fits
Chrome 44-0218 44-0564 41580-79 1984-86 FXWG
Kit Cpt Spacer Axle only Nut Kit Fits 1980-86 FXB-FXSB
44-0564 1982-84 FL-FX 44-0219 44-0243 41110-79A 1982-94 FXR
44-0547 44-0342 44-0219 8715-4 1985-92 Softail
44-0610* — 41110-79A 2000-06 FXST-FLST
44-0548 44-0342 44-0219 8715-4 1993-99 Softail
44-0620 2026-5* 44-0219 — 2000-06 FLST 44-0127 44-0155 41110-89 2007 FXST-FLST
2000-06 FXST 44-0873 44-0874 2008-17 FXST
44-0893 2512-7 44-0895 44-0242 2008-17 FXST 44-0895 44-0873 41641-08 2008-17 FXST
44-0633 — 44-0219 — 2000-07 FXSTD 44-2014 — 41114-90 1990-05 FXD
44-2001 44-0341 44-0219 8715-4 1982-95 FXR 44-0765 44-0765 41114-06A 2006-07 FXD
44-0150 44-0227 44-2014 9812-3 1990-99 FXD 44-0766 — 41114-08 2008-17 FXD
44-0681 2038-4* 44-2014 — 2000-05 FXD — 44-0292 Kit Nut Kit
44-0694 2335-5* 44-0765 — 2006-07 FXD *Note: Includes spacers and nut.
44-0713 2516-5* 44-0766 — 2008-17 FXD
*Note: Includes Nut Kit
Axle Adjuster
Axle Protector Plates prevent axle nuts from Calibrated Rear Wheel Adjusters fea-
scratching painted finish. Sold in pairs, polished ture chrome pyramid blocks with sight
stainless. Fits 1984-06 FXST-FLST. indicator to view calibrated adjuster bolt,
VT No. 44-1989 for accurate and easy wheel alignment.
44-1989 Adjuster bolt is chrome heavy duty ¹⁄₂” rod
44-2011 with micrometer markings; nut is stain-
less steel. Fits 1973-85 FX-FLH, 1984-86
44-0583 FXST. VT No. 44-2011
Pyramid Adjuster Block Kit has die cast
42-0030 chrome pyramid end caps for use with stock type
44-0250 pull adjusters. Fits 1997-up FLT rear fitment.
FXR Rear Axle Adjusters include heavy axle pull blocks and
VT No. 44-0250
chrome end caps with allen screws, for 1982-94. Chrome pivot
covers also available.
VT No. Item
44-0583 Adjusters
42-0030 1982-89 Pivot Cover Set
FXD
Chrome Adjuster Block Set fits 1991-05 Chrome Rear Wheel Adjuster
FXD models. Hardware for 1991-05 models.
2000-6 Swingarm End
Plate with Adjuster
2001-2 Swingarm End Plates
445
Rear Axle Spacer
2038-4
2037-4
44-0658 44-0729
9810-4 2026-5
Axle Spacers feature ³⁄₄” inner diameter for front or rear
wheel use.
Sets Each Length Finish
9811-3 — 44-0937 .560” Chrome
— 44-0879 ³⁄₄” Chrome
— 44-0342 1.25” Chrome 44-0731
Chrome Rear Axle Spacer Kits. FX-FLST Kits include left — 44-0325 ²⁷⁄₃₂” Chrome
side spacer, two axle adjuster collars and castle nut. Kits for 44-0729 — ¹⁄₈” Chrome
Dynaglide include castle nut for axle and adjuster collars. 44-0730 44-0253 ¹⁄₄” Chrome
Stock Grooved Years 44-0731 — ³⁄₈” Chrome
For FXST Models 44-0732 — ¹⁄₂” Chrome
9810-4 — 1987-99
44-0733 — ⁵⁄₈” Chrome 44-0735
2026-5 — 2000-07
2026-5T — 2000-07 — 44-0877 .650 Chrome
2512-7 — 2008-17 44-0734 44-0430 ³⁄₄” Zinc
For FXD Models 44-0735 44-0254 1” Chrome
9812-3 — 1991-99 44-0737 — 1¹⁄₄” Chrome
2038-4 2037-4 2000-05 — 44-0786 1⁵⁄₈” Zinc 44-0735
2335-5 — 2006-07 44-0736 44-0429 1¹⁄₂” Zinc
2516-5 — 2008-up — 44-0659 1³⁄₁₆” Chrome
— 44-0227 1⁷⁄₁₆” Chrome
— 44-0658 1¹⁵⁄₆₄” Chrome
44-0879
A B D C E
Rear Axle Spacers. 44-1944
Chrome Zinc # Application
44-0325 44-2051 A 1984-86 FXST cast/wire wheel
1973-82 All FL’s left cast/wire,
1973-83 FX-FXE-FXEF 44-0427 44-0421
FXEF-80-FXWG left wire wheel
1981-86 FXE-80 wire wheel Rear Axle Seal Spacer Sets.
1973-86 All FX cast wheel VT No. Application
44-0342 44-0345 B 1986-99 FXST-FLST 44-0421 1982-86 FXR’s cast/wire wheel pairs
44-0655 C 1982 only Classic 1983-up FLH-80 1984-86 FXST wire wheel, 1982-86 FXWG wire wheel
Cast or wire, 1984-86 FXWG wire 1982 only FXS-80, wire wheel
1980-86 FXB-FXSB cast wheel 1982-86 FXB-FXSB cast wheel
44-0659 44-0341 D 1982-up FXR left side cast/wire 44-1944 As above with lip
1985-up FXRT cast wheel 44-0427 1987-99 FLT-FXST-FXR
44-0227 44-0374 E 1990-99 FXD DIY Universal Axle Spacer is constructed of
44-0813 — 2000-07 FXST stainless steel 6” long to be cut to length.
44-0788 44-0690 VT No. Inner Diameter
44-0670 ³⁄₄”
44-0753 1”
44-1978
Rear Axle Spacers allow wheels with 1” or 25 mm inner
diameter bearings to fit ³⁄₄” axle.
VT No. Length Axle Locator Set allows use of ³⁄₄ axle in stock
44-0788 1¹⁄₈” rigid frames with ⁷⁄₈” axle slots. VT No. 44-1946
44-0690 1¹⁄₁₆”
44-1978 1”
Axle Nut
Chrome Castle Nut Kit includes washer and cot- Chrome Rear Axle Spring Clip replaces 510
ter pin for rear axles on 1989-up models. Replaces spring clip used on all 1991-up FL, FX, XL.
7987, 511. Sold as pack of 5.
37-9032 VT No. 37-9032 VT No. 2042-5
8606-6 Chrome Rear Axle Nut Kit is a custom hard- Chrome Axle Parts for 1972-79 FL-FLH,
ware kit with installation instructions. Fits 1973- 1973-79 FX-FXE-FXS, 1952-79 Sportster.
up Big Twin. VT No. Item U/M
VT No. Style 44-0326 Nut with washer Kit
8606-6 Acorn 44-0326 37-8127 Nyloc-Nut 10
8607-6 Cap 44-0749 Nut Washer 1
446
Chrome Rear Axle Adjuster
and Nut Kit includes adjust- Rear Axle and
Hardware for Softail
ers, collars, axle nut washer
BIG TWIN
and “nugget” chrome cover.
Kit allows use of existing nut
and cotter pin.
VT No. Year
A
44-0635 1986-92
44-0636 1993-99 B D C
44-0634 2000-07
44-0545 44-0698 E
2023-2
44-0609 Shown
Axle Adjuster Kits for Softails include collars and adjuster 44-0607
screws with nuts.
VT No. Year
44-0545 1986-92 FXST-FLST Rear Axle Kit with chrome hardware and items
44-0642 1993 pictured. Each item is available separately.
44-0641 1994-99 VT No. # Note Fits
44-0609 2000-07 44-0547 A-B-C-D-E Kit 1987-92 Kit
44-0698 2008-17 44-0548 A-B-C-D-E Kit 1993-99 Kit
44-0620 A-B-C-D-E Kit 2000-06 Kit
44-0892 A-B-C-D-E Kit 2007
44-0893 A-B-C-D-E Kit 2008-17
37-8908 44-0597 Cap Adjuster 1987-92
44-0219 A Chrome Axle
44-0342 B Chrome Spacer
37-9007 8715-4 C Nut Kit With washers
44-0545 D and E Adjuster Kit 1986-92
37-8908 Installed Chrome Rear Axle Caps fit 44-0609 D and E Adjuster Kit 2000-07
1987-06 FXST-FLST models, 44-0618 D Collar 1994-99
completely covers axle ends 44-0607 D Collar 2000-07
and cotter key area. Easy to 44-0725 D Collar 2008-17
install. 8934-2 E Adjuster only 1986-92
VT No. Style 9515-2 E Adjuster only 1993-99
37-8908 Smooth 9515-2T E Adjuster only 1993-99
37-9007 Maltese 2023-2 E Adjuster only 2000-07
2517-2 E Adjuster only 2008-17
Rear Axle Cover adds a smooth
finished look. Easily installed with set Rear Axle Cover
screw. Set of two. Fits 1984-06 Softail.
VT No. 2121-2
Chrome Tail Spurs dress

42-0676 up rear castings on 1986-99
FXST-FLST models. Contour
steel covers fit behind adjust- 42-0034 42-2036
ers to protect paint when
axle is removed. Chrome Chrome Softail Rear Frame
adjuster nuts supplied. Covers bolt onto cover axle
VT No. Item adjuster area on all Softail
42-0676 Spurs frames 1986-99. Hardware
44-0545 Adjuster Kit and instructions included.
44-0812 VT No. Style
42-0034 Smooth
44-0812 Skull
42-2036 Delta
447
Custom Rear Axle 44-1951
44-0221 44-0230 Milled Flats
Note: Rigid types have a milled head to fit replica rigids.

VT No. Item Length
Rigid Head Detail
Rigid
44-0221 Kit 10.25”
44-2038 Kit 11.75”
44-1951 Axle 10.25”
Rigid Frame Disc Brake Rear Axle for use when 1973-up 44-0230 Axle 10.75”
rear disc brake units are installed on rigid frames. Kit includes 44-2043 Axle 11.75”
.750” diameter axle, nut, special spacer and washers. Other 44-1985 Axle 11.25”
axles sold separately. Spacers may have to be cut to length. 44-1986 Axle 12..25”
Rigid axles have milled area on hex head. Swing arm does not. 44-1942 Axle 12.50”
Length includes threads not head. Swingarm
44-1945 Axle 11.50”
44-0520 Chrome Rear Axle Nut and Washer Kit 44-0947 Axle 12”
includes two extra thick washers, nut and 44-1044 Axle 12.50”
lock washers for 1973-up, on square swing Axle Collar Sleeves have milled flat section on
arms. one end to fit rigid frame slots.
VT No. Brand VT No. Length U/M
8715-4 Colony 44-0394
44-0394 15/16” Pair
44-0520 V-Twin 44-1987 113/16” Each
44-0667 44-1988 23/4” Each
44-0316 Sleeve Collar
44-0520 Nut
Axle Locator Set allow use of ³⁄₄ axle in
37-0889 stock Rigid frames with ⁷⁄₈” axle slots.
44-0647
VT No. 44-1946
44-0645 44-0656
³⁄₄” Threaded Axles feature 1 inch of ³⁄₄” — 16 UNF thread at
each end. Use with acorn, pike or nyloc nuts as required. Custom Rear Axle for 1986-99 Softail models. Include ³⁄₄” x
VT No. Item Length 14.5” axle.
44-0667 Axle 12¹⁵⁄₁₆” VT No. Style
44-0638 Axle 13.5” 44-0645 Pike
44-0646 Axle 14.0” 44-0656 Acorn
44-0148 Axle 14.5” 44-0054 44-0055
Wheel Bearing Adapter Sleeves
44-0652 Axle 15.0” to adapt 3/4” axles to later hubs.
44-0149 Axle 16.0” VT No. Fits
37-0889 Acorn Nut Set 44-0054 25 mm
44-0647 Pike Nut Set 44-0055 1”
Axle Nut Cover

37-8885 37-8884 Chrome Axle Nut Caps Set for both axle nut and axle head
where required. Each cap has an internal hex to allow more
thickness for the set screws thread to eliminate thread stripping.
Note: These axle caps will not work on late model rear axles
with cotter key locking devices.
Front Rear Fitment
37-0041 44-0742 — 37-8885 1984-94 FXST
Does Not Fit Rear 1989-94
— 37-8885 1982-87 FXR
— 37-8885 1981-85 FX
— 37-8884 1973-80 FX
— 37-8886 1971-72 FX
— 37-0041 2000-07 Softail
— 44-0742 2008-up Softail
44-0741 — 2007-up FXST
37-0999 — 2007-up FXST for 25 mm axle
2536-2 — 2007-up FXST
44-0741 37-0999
37-0999 — 2008-up Touring for 25 mm axle
— 44-0845 2006-07 FXD
— 37-8885 1980-94 FLT
2536-2 Does Not Fit Rear 1989-94
448
Wheel Hub Bearing
Big Twin Hub Rebuild Kit
contains bearings, races,
seals and seal spacers. Hub
and internal bearing spacer 44-0589
BIG TWIN
44-1997
not included. Fits 1986-94
FXR, 1984-99 FXST-FLST
VT No. 44-0453
Rear Double Row Retro fit wheel bear-

ing kits for models with bearings. Double
row wheel bearings eliminate wheel
play, have a longer wear life, require no Deluxe Rear Hub Rebuild contains all internal parts including
adjustment. Kits include two bearings, longest length inner spacer (white 4.4480). Spacer can be cut
center spacer and spacers. Fit 1984-99 down or collar removed for some applications.
FXST, FLST, 1991-99 FXD, XL. VT No. Note Fits Brand
44-2995 VT No. 44-2995 44-1997 1 1984-90 FXST, 1987-91 FXR Peer
Replica Bearing Kits include inner spacer, rear. 44-2047 1 & 2 1992-99 FXST-FLST-FXR, Peer
VT No. Year Model Dynaglide, XL,
44-0989 2000-07 FLT 1987-99 FLST Wire Wheel only
44-0997 2000-07 FXST-FXD 44-2048 1 & 2 As Above for Cast Wheel only Peer
44-0998 2008 FLT 44-0589 2000-05 Softail, XL, FXD SMT
44-0999 2009-up FLT Non-ABS Note: 1. Does not include snap rings and seal washers.
FLT Wheel Hub Hardware fits 1982-99 2. Order spacer shims separately.
models, 1982-99 FXR models. Rear Wheel Bearing Race
and Seal Kit includes two of
VT No. OEM Item
each bearing, race and prop-
44-2024 43613-92 2.424” Spacer for narrow hub
er seals. Fits 1983-94 FXR,
44-2025 43608-82 4.308” Spacer for wide hub
44-2026 43650-82 Spacer Washer 1983-99 FXST-FLST-FLT-
44-2027 43290-82 .032 Shims, 10 pack XL, 1991-99 Dynaglide, cast
44-2028 43291-82 .016 Shim or wire wheel.
44-2029 43292-82 .008 Shim VT No. 44-0420
44-2030 43293-82 .004 Shim
44-2031 43294-82 .002 Shim Bearings Kit includes two tapered bear-
44-0313 44-0860 44-0961 44-0954 ings and two races replacing 9052 for
1973-99 Big Twin swing arm 1958-85.
VT No. Item
44-0859 44-0858 44-0425 4 Piece Kit
Inner Hub Bearing Tube Spacers may be used in some cast 44-0405 Race and Bearing, one pair
mag wheel applications when flange is removed. Check for prop- 44-0406 Bearing Only, one piece
er length fit.
44-0407 Race Only, one piece
VT No. OEM Model/Year Type Fits
44-0313* 43623-78 1978-99 FX-XL 2.564 Violet Front
44-1980* 43624-78 Front 2.550 Pink Front
44-1981* 43625-78 Choose Length 2.536 Gold Front
44-0958 43625-78 Front 2.542 Front
44-0356 43608-00 2000-07 FXST
2000-01 FLT Rear Front Inner Hub Bearing Tubes.
and Rear VT No. OEM Length
44-0362 43613-00 2000-03 Front XL, FXD Front Steel Dual Flange Hub Spacer, Front and Rear
44-0858 43517-00 2000-07 FLT Front 44-0338 43601-78 4.420” Orange
2002-07 FLT Rear 44-0336 43602-78 4.434” Yellow
44-0859 43755-04 2004-06 FXD Front 44-0337 43603-78 4.448” White
44-0860 43641-01 2001-03 FX Front Cast Wheel Hub Spacer, Front and Rear
44-0885 43906-08 2008-up XL Rear 44-2032 43604-78 4.420” Red
44-0961 41349-07 2007-up FXST Front
44-2033 43605-78 4.434” Yellow
41349-07 2007-up FLT Rear
44-0962 41900-08 2008-up FLT Front\ 44-2034 43606-78 4.448” White
2008 FLT Rear Front, Cast
44-0943 41696-08 2008-up FXST Rear 44-2025 43608-82 4.308” FLT
44-0708 43905-08 2008-17 FXD Rear 44-0236 43612-92 FLSTF
44-0954 41748-08 2008-17 FXD Front Front Laced
*Note: Choose proper length. 44-0237 43668-82 FLT-FLST-FXST-WG
Wheel Seals. Adjustable Inner Hub Spacer for 1973-
Note: VT No.14-0139 and 14-0658 feature metal
99 wire wheels and most custom wheel
housing all others are rubber covered.
application.
James VT No. OEM Fits VT No. 44-0639
14-0659 14-0140 47519-83A 1983-99 FX, 1985-99 FLST,
Front/Rear Wheel
Double Lip
— 14-0182 47519-83 1983-84 As Above
449
Wheel Bearing Kit 44-0536
Front Wheel Bearing, Race and Seal

Kit contains two of each, bearing, race
and proper seals. Fits 1984-94 FXR
44-2045
cast or wire, 1984-99 All FX-FLT-FXST
cast or wire,1991-99 Dynaglide, cast or Front Wheel Assembly Kit for steel hubs only. Contains two
wire. VT No. 44-0417 of each of each, bearing, race and seal and one correct seal
spacer. Also included for certain applications only are two each
Front Internal Hub Kit includes all snap ring and seal retainer washers. Not included in this kit is
internal parts for complete rebuilding the internal bearing spacer which may be ordered separately.
of all alloy front hubs. Includes inner Check listing.
spacer, bearings, races seals and seal VT No. Wheel Fits
spacer matched for each year group. 44-0456 Wire 1984-86 FXWG
44-0611 Hub is not included. 44-0457* Wire 1984-85 FXST
44-0536* Wire 1986-99 FXST, 1993-99 FXDWG
VT No. Type Fits 1984-99 FLT
44-0537 Single Disc 1984-91 FX-FXR, 1984-91 XL 44-2045* Cast 1992-99 FLSTF
44-2049* 1992-94 FXR, 1992-99 FXDL 44-2046 Cast 1987-91 FLST
44-0611 Single Disc/ 2000-07 FXD, XL *Note: Does not include snap rings and seal washers.
Dual Disc Cast or Wire wheel 44-0993 12-0631
44-0988 Single Dual 2000-05 FXD
2000-07 XL
44-0990 Single 2007-up FXST 12-0592
*Note: Order spacer shims separately.
Wheel Bearing Greaser. Fitting and Wheel Bearing fits front and rear.
spigot greases 1973-99 tapered bear- VT No. OEM Fits U/M Size Year
ings without removing seals, use exist- 12-0592 9267 FXD, FXST Each 3/4” 2000-06
ing seal spacer or purchase separately. 44-0993 9267 FXD, FXST Pair 3/4” 2000-06
VT No. Item 12-0631 9276 Softail Front Pair 25mm 2008-up
16-0803 Tool 44-0900 9253 ABS/Non-ABS Each 25mm 2007-up
44-0303 Collar 12-0999 6276B 25mm 2011-17 FXST
2012-17 FLST
2012-17 FXD
2015-up XL
44-0901* 21” ABS/Non-ABS Each 25mm
Wheel Assemblies 44-0902*

44-0903*
23”
26”
ABS/Non-ABS Each
ABS/Non-ABS Each
25mm
25mm
*Note: Bearings for larger than stock diameter wheels have a
greater reinforced magnetic area that will not set off any engine
codes after proper installation.
Cast Wheel Cover

45-0689
Rear Wheel Assemblies for LH drive with 2000-up hub for

Softail models tube type or tubeless application. Wheels have
extension on pulley side to minimize pulley spacers and bearing
is moved outboard to prevent bent axles. Rear wheels accept
11¹⁄₂” disc rotors. Single flange are for right side drive. The 1984-
99 hub types use Timken bearings and the 2000-up hub types
Front Chrome Wheel Covers are contour formed to fit alloy
use sealed bearings without ABS. 1” axle size.
16” FXST rear and Fat Boy front and rear, covering up to the
VT No. Size Spoke
step at the valve stem hole area. Both are held in place by
52-0122 18” x 8.5” 60
the rotors and belt pulley. Sold as a set. Fits 1986-99 FLSTF.
52-0682 18” x 10.5” 80
VT No. 45-0689
52-0683 18” x 10.5” 120
52-0684* 18” x 10.5” 80
52-0685* 18” x 10.5” 120
52-0640* 17” x 12” 80
52-0642 17” x 12” 80
*Note: Single sided hub flange
450
42-9921
Hubcap
45-0866 45-0863
BIG TWIN
45-0862
45-0761
45-0864 45-0866
45-0805 45-0801 45-0865

Chrome FLST Front Wheel Hubcaps are held by a snap ring.
The full 8” dresser hubcaps for wire wheels on glide type forks fit 44-0809 44-0890 44-0889
between hub and axle without additional hardware.
VT No. OEM Fits
42-9921 43067-86 1986-96 FLST Single Disc 16”
wheel held by snap ring Hub Cap Adapter Kits. Hubcap available separately.
45-0761 Cap Only VT No. Fits Side Chrome Hubcap Kit
45-0960 43162-97 Front Hub Cap Kit, chrome 44-0809 1986-99 FLST Right, zinc 45-0862
45-0934 Cap Only 44-0976 2007-17 FLST Right, zinc
45-0801 43155-00 2000-06 FLST 44-0894 1997-99 FLSTS Left, zinc 45-0866
45-0805 415401-07 2007-17 FLSTC 44-0888 2000-06 FXST Right, zinc 45-0863
12-0956 11175 Snap Ring for 1986-96 FLST Hubcaps 44-0889 1984-99 FXST Right, zinc 45-0864
44-0890 1997-99 FXSTS Left, zinc 45-0865
42-0068 44-0974 2000-06 FLSTS Left, zinc 45-0867
44-0975 2000-06 FLSTF
44-0995 2000-06 FLST
42-0073 — 2000-06 FLSTS Right 45-0964
Chrome 4¹⁄₂” Hubcaps fit “Baby Moon” Chrome Rear Hubcap
between hub and axle without additional hardware. with screws. Fits 1993-1999 FXST.
VT No. Type Fits VT No. 45-0416
42-0068 Rear 1984-99 FXST-FLST
42-0073 Front 1986-96 FLST Chrome Mini Cap fits between swingarm and axle
45-0408 Front, Mag 1984-95 XL, FXD spacer. Fits 1973-95.
Brushed Aluminum VT No. 45-0692
Front And Rear Wheel Hub

All hubs include bearings, races, seals, seal spacers and are assembled and chromed for 40 spokes except where noted.
D E F G H
A B C 45-0588 45-0329
Front Hubs
45-0589 45-0590 VT No. # Year Model
45-0295 D 1984-99 FXST-FXSTC-FXDWG
J 45-0295 D 1984-85 FXWG, Single Disc
45-0329 F 1996-99 FLSTS
45-0588 E 2000-07 FXST, Single Disc, Polished
45-0785 E 2008-17 FXST, FLST, FXDWG without ABS
45-0815
I 45-0324 45-0591 E 2000-07 FXST-FLST, Single Disc
Rear Hubs 45-0688 D 1986-99 FLST-FLSTC Single Disc
VT No. # Year Model 45-0298 G 1984-99 FXR-FXD-FXRS
45-0670 A 1982-85 FXE-FXWG-FXR 1984-85 FXSE-80, FXEF Single Disc
45-0325 B 1986-99 FLT 45-0292 G — As above but Dual Disc
45-0670 A 1984-85 FXST 45-0532 H 2000-03 FXD, FXDL Single Disc/Dual Disc 45-0816
45-0671 A 1986-99 FXR-FXST-FLST 45-0641 H 2000-03 FXDL-FXDX, Single Disc (21”)
45-0324 C 1986-99 As Above Billet Type 45-0813 45-0589 I 2006-07 FXD
45-0332 C 2000-06 FXST-FXD, 2000-01 FLT 45-0788 I 2008-17 FXD with 25mm bearings, 49mm forks w/o ABS
45-0333 C 2002-07 FLT 45-0590 J 2006-07 FXDWG
45-0333 C 2006-07 FXD 45-0293 D 1988-99 FXSTS
45-0859 C 2008-17 FXD without ABS 45-0326 A 1984-99 FLT
45-0473 C 2008 FLT Only without ABS 45-0336 F 2000-07 FLT
45-0474 2008-up FLT 45-0786 E 2008only FLT Dual Disc without ABS
45-0853 C 2008-17 FXST-FLST-FXDWG without ABS 45-0812 45-0968 E 2009-up FLT, Touring, Dual Disc without ABS
Rear Hubs with ABS 45-0342 2004-05 FXD
45-0813 2009-up FLT with ABS Front Hubs with ABS
45-0812 C 2012-17 FXD with ABS 45-0815 E 2000-17 FXST, FLST, FXDWG with ABS
45-0814 C 2011-17 FXST-FLST-FXDWG with ABS 45-0816 I 2010-17 FXD with ABS 45-0817
45-0817 E 2009-up FLT with ABS
Note: Install ABS bearing first on brake rotor side of hub with greenish tan side facing out. Install
45-0814 non ABS bearing on drive side of hub with lettered side facing out. 451
Profile Wheels
Profile Wheels
16” Rear FLT # of Spokes Rim Width Finish
52-0667 2000-01 40 3.0” Chrome
52-1240 2000-01 40 3.0” Chrome
52-1242 1986-99 40 3.0” Chrome
52-0665 2002-07 40 3.0” Chrome
52-0666 2000-01 40 3.0” Chrome
16” Front FLT # of Spokes Rim Width Finish
52-0898 2009-up
w/o ABS 40 3.0” Chrome
52-1020 1984-99 40 3.0” Chrome
16” Rear XL # of Spokes Rim Width Finish
52-0667 2004-04 40 3.0” Chrome
52-1240 2004-04 40 3.0” Chrome
52-0589 1986-99 40 3.0” Chrome 52-0660
52-0665 2005-07 40 3.0” Chrome
52-0666 2000-04 40 3.0” Chrome Chrome Profile Laced Wheel.
16” Rear FXD # of Spokes Rim Width Finish VT No. Fits
52-0667 2000-05 40 3.0” Chrome 21” Front
52-0666 2000-05 40 3.0” Chrome 52-0660 2000-06 FXST except FXSTS and
52-1240 2000-05 40 3.0” Chrome 2000-05 FXDWG models
52-0589 1991-99 40 3.0” Chrome 52-0555 2007-17 FXST without ABS
21” Front FXDWG # of Spokes Rim Width Finish
52-0660 2000-05 40 2.15” Chrome
16” Rear FX # of Spokes Rim Width Finish
52-0546 1973-84 40 3.0” Chrome
16” Front or Rear FL # of Spokes Rim Width Finish
52-0546 1973-84 40 3.0” Chrome
16” Rear
FXST, FLST # of Spokes Rim Width Finish
52-0667 2000-07 40 3.0” Chrome
52-1240 2000-07 40 3.0” Chrome
52-0589 1986-99 40 3.0”
52-0666 2000-07 40 3.0”
Chrome
Chrome
16”
16” Front FLST # of Spokes Rim Width Finish
52-0554 2007-08 40 3.0” Chrome 52-0665
52-0664 2003-06 40 3.0” Chrome
21” Front FXST # of Spokes Rim Width Finish
52-0555 2007-17 40 2.15” Chrome
52-0660 2000-06 40 2.15” Chrome
16” Rear FXR # of Spokes Rim Width Finish
52-0589 1986-94 40 3.0” Chrome
23”
52-0231 Custom 3/4” bearings 3.0” Chrome
52-0450 1984-95 FXST 3.0” Chrome
52-0456 1997-99 FLST 3.0” Chrome
52-0457 2000-06 FXDWG,FXD 3.0” Chrome
52-0459 2008-17 FXST 3.0” Chrome
52-0460 2000-06 FLST 3.0” Chrome
52-1033 1984-99 FLT w/out ABS 3.0” Chrome
52-0462 2000-04 FLT 3.0” Chrome
52-0465 2009-up FLT 3.0” Chrome
52-0466 2009-2017 FXDWG 3.0” Chrome 52-0664
52-1024 1984-94 FXR, 90-94 FXD 3.0” Chrome
52-1025 1978-83 FX, XL 3.0” Chrome
52-1026 1973-84 FL 3.0” Chrome
Chrome Rear Profile Laced Wheel. The profile rim is an alu-
minum rim with a smooth chrome finish.
Front Smoothie Wheel 16” Rear
Rims feature a smooth VT No. Fits
profile with chrome on 52-0589 1986-99 FXST
aluminum construction. 52-0666 2003-07 Softail models
52-0791 52-0790 VT No. Size 52-0667 2000-05 Dynaglide models
52-0790 16” x 3.0” 16” Front
52-0791 21” x 2.15” 52-0664 2003-06 FL Softail models
52-0554 2007-08 FLST
452
Spoke Set Chart
BIG TWIN
45-0409 45-0954
45-0955
45-0952
Styles Shown for Reference Only.
40 Short Shank Spokes

Note: Spokes in this list fit hor-
izontal flanged hubs as styles
shown.
Flat Flanged Hubs. Front and rear flanged hubs, including 1936-84 FL-FLH front and rear, 1973-84 FX-FXE rear, 1954-99 XL
rear, 1984-95 FLST-FXST-FXDWG front or rear, 1996-up FLST-FXST alloy rear, 1986-up FLT rear, 2000-up XL alloy rear and
1996-up Dynaglide alloy rear. All spokes listed are 6-8 gauge. Kits include 40 spokes and 40 nipples.
Spoke Spoke Sets for Flat Flange Hubs
Chrome Chrome Chrome Chrome Stainless Stainless Chrome Chrome Size Rim Note
V-Twin Buchanan Twirled Twirled Twirled Twirled Diamond Diamond Type
V-Twin Buchanan V-Twin Buchanan V-Twin Buchanan
45-0620 — — — — — — — 15” DC
45-0621 45-0720 45-0703 45-0675 45-0709 — — 45-0682 16” DC 3
45-0952 — 45-0765 — — — — — 16” Profile Rim
45-0956 — — — — — — — 16” Profile Rim 5

45-0762 45-0765 — — — — — 17” DC 4
45-0601 45-0721 — — — — — — 18” C
45-0610 — — — — — — — 18” DC
45-0602 — — 45-0727 — 45-0729 — — 19” C
45-0767 45-0728 — — — — — — 19” DC 1
45-0621 45-0603 — 45-0706 45-0677 45-0726 — 45-0716 45-0684 21” DC/C
45-0954 — — — — — — — 21” Profile Rim
Spoke Spoke Sets for Flat Flange Hubs Notes:

Chrome Stainless Stainless Cadmium Perma Size Rim Note 1. Fits Disc Type Spool Hub
Only
Rippled V-Twin Buchanan Plated Chrome Type* 2. Fits Drum Type Spool Hub
Buchanan V-Twin Only (Cross 3)
3. VT No.45-0409 is Hand
45-0731 45-0409** 45-0651 45-0710 45-0632 16” DC 3 Polished
— — — — 45-0946 16” DC W 4. Use with rim 52-0435
— 45-0748** 45-0652 — — 18” C 5. Use with rim 52-0790
45-0954 — 45-0955 45-0656 — — 18” DC *Note: Rim Type Drop Center =
— 45-0764 45-0653 — — 19” C DC or Conventional = C
45-0764 — — 45-0654 — — 19” DC 1 Profile Rim = P
— 45-0713 45-0655 — 45-0633 21” DC/C W = Fits wide 52-0430 rim
**Note: Polished stainless steel
— — — — 45-0377 23” DC spokes.
6/8 Gauge Nipple 40 Piece Set.

45-0626
VT No. Type
45-0626 Standard, Chrome
45-0160 Standard, Cadmium
45-0680 Standard, Stainless
45-0521 Extended, Chrome
45-0782 Extended, Stainless
453
Front Spoke Set
Spokes listed fit
alloy hubs with
vertical flanges as
shown.
All Spokes Listed Are 6-8 Gauge

FX-XL-FXR 1973-up Alloy Hub Spoke Set with single or dual
Twirled-Diamond-Stock are noted as the following:
disc with vertical flanges to house spokes. Sets include 20 long
B Twirled Buchanan
and 20 short shank spokes. Shank is 8 gauge portion which fits
B Twirled V-Twin
in hub flange with 40 nipples.
A Diamond Buchanan
Short C Ripple Style
*Note: Rim Type **Note: Polished Stainless Steel
C = Conventional
DC= Drop Center
Long P = Profile
Spoke Set for Alloy Front Disc Spool
Chrome Chrome Stainless Stainless Chrome Stainless Stainless Perma Size Rim Note
Chrome
Twirled Twirled Twirled Diamond Rippled V-Twin Buchanan Chrome Type*
V-Twin
V-Twin Buchanan Buchanan Buchanan Buchanan
45-0606 — — — — — — — — 19” C
45-0623 45-0705 45-0676 45-0699 45-0683 — 45-0714 45-0660 45-0631 19” DC
— 45-0751 45-0686 45-0701 45-0687 45-0755 — 45-0662 — 21” DC/C
45-0611 — — — — — 45-0612** — — 21” DC/C Fits 1995-
up FXD-XL
45-0953 — — — — — — — — 21” P
45-0937 — — — — — — — — 23” DC
Twirled Spoke Wheel

FRONT 52-0845 52-0842
52-0853 Spoke Detail

Twirled Spoke Wheels include chrome hubs with internals, rim VT No. Fits Type Width
and twirled chrome spokes assembled. REAR
VT No. Fits Type Width 52-0177 1982-84 FXE 16” 3.00”
FRONT 1982-86 FXWG
52-0859 1984-99 FLT 16” 3.00” 1984-85 FXR
52-2025 2000-06 FLST 16” 3.00” 52-0842 1986-95 FXST-FLST-FXD 16” 3.00”
52-0852 1986-99 FLST 16” 3.00” 52-0851 As Above 16” 4.00”
52-0911 1997-99 FXST 16” 3.00”
52-0843 1984-95 FXST-FXDWG 21” Single 2.15”
52-0976 2000-05 FXST- FLST-FXD 16” 3.00”
52-0908 1996-99 FXST 21” Single 2.15”
2000-01 FLT
52-0853 1988-06 FXSTS 21” Single 2.15” 52-0978 2000-05 FXST-FXD-FLST 16” 4.00”
52-0971 2000-06 FXST-FXDWG 21” Single 2.15” 2000-01 FLT
52-2014 2008-up FXST w/out ABS 21” Single 2.15” 52-0858 1986-99 FLT 16” 3.00”
52-0909 1996-99 FLSTS 16” Single 3.00”
52-0972 2000-07 FLSTS 16” Single 3.00”
52-0845 1984-99 FXR-FXD 19” Dual/Single 2.50”
52-0943 1984-99 FXR-FXD 21” Dual/Single 2.15”
52-0973 2000-03 FXD 19” Dual/Single 2.50”
52-2015 2004-05 FXD 19” 2.50”
52-0974 2000-03 FXD 21” Dual/Single 2.15”
52-2016 2004-05 FXD 21” 2.15” Since 1969! Wheel Building Service
Select any of our hubs, a set of spokes including stainless steel, chrome,
twirled or diamond spokes and a rim. We will lace and true in our plant. The
finished wheel can be shipped in 24 hours. Complete wheel will be billed as fol-
lows: Rim, Spokes, Hub and Labor. Service limited to components in stock.
VT No. 60-0125
454
52-0169 52-0906
Chrome Front Wheel
For 41 and 49mm forks as noted
BIG TWIN
Complete Wheels in stock for immediate shipment from
V-Twin MfgTM. The original aftermarket wheel builders since 1969.
*Note: Polished stainless steel spokes
Wheel Wheel Rim Rim Width
W/Chrome Spokes Diameter
Spokes
1988-99 FXSTS with single disc on Spring Fork
— 52-0825 16” 3.00”
52-0199 — 18” 2.50”
52-0778 — 18” 4.25”
Wheel Wheel Rim Rim Width
W/Chrome Spokes Diameter 52-0185 52-0826 21” 2.15”
Spokes 52-0489 — 21” 3.25”
2000-17 FLSTS with 41 mm fork and single disc without 1984-95 FXST-FXDWG, 1984-85 FXWG with single disc.
ABS Fits 41mm forks.
52-1092 52-1093 16” 3.00” 52-0175 52-0823* 16” 3.00”
2000-06 FLST-FLSTSF with 41 mm fork and single disc 52-0829 52-0830* 19” D.C. 2.50”
without ABS 52-0169 52-0824 21” 2.15”
52-2006 52-2007* 16” 3.00” 52-0455 — 21” 3.25”
52-0483 — 21” 3.25” 52-0450 — 23” 3.00”
52-0460 — 23” 3.00” Fits 24-0514 assembly only.
2007-17 FLST-FLSTF with 41mm fork and single disc 52-0848 52-0849 16” 3.00”
52-0995 52-0996 16” 3.00” 1996-99 FXST-FXDWG-FLSTS with single disc. Fits
2008-17 FLST, FXST, FXDWG without ABS 41mm forks and Spring Fork (FLSTS).
52-1054 — 16” 3.50” 52-0904 52-0905 16” (FLSTS) 3.00”
52-1053 52-1056 21” 2.15” 52-0906 52-0907* 21” 2.15”
52-0488 — 21” 3.25” 52-1032 — 23” 3.00”
52-0459 — 23” 3.00” 1986-96 FLST with single disc. Fits 41mm forks.
2006-07 FXD with 49mm fork 52-0696 52-0695* 16” 3.00”
52-2031 52-2032 19” 2.50” 52-0694 52-0693 21” 2.15”
52-2027 52-2028* 21” 2.15” 52-1028 — 23” 3.00”
52-1035 — 23” 3.00” 2000-06 FXDWG with 41mm forks and single disc
2006-2007 FXDWG with 49mm fork 52-1084 52-1085* 21” 2.15”
52-2086 52-2085 19” 2.50” 52-0480 — 21” 3.25”
52-2029 52-2030 21” 2.15” 52-0457 — 23” 3.00
2007 FXST, 2007-17 FXSTS 2000-06 FXST/FXSTS
— 52-0998 21” D.C. 2.15” 52-1084 52-1085* 21” 2.15”
2008-17 FXDWG with 49mm fork 52-1027 — 23” 3.00”
52-1053 52-1056 21” 2.15” 2008-17 FXST
2008-17 FXDF with 49mm fork without ABS 52-1053 52-1056 21” 2.15”
52-0478 — 19” 2.50” 1997-99 FLST with single disc. Fits 41mm forks
52-0486 — 21” 3.25” 52-2019 52-2020* 16” 3.00”
2011-17 FLST, FXST, FXDWG with ABS 52-0479 — 21” 3.25”
52-2054 — 16” 3.00” 52-0456 — 23” 3.00”
52-2055 — 21” 2.15”
52-2056 — 21” 3.25” Wheel Builders
Wheels are laced and trued. They are direct
2008-17 FXDF with 49mm fork without ABS bolt on for models listed. Hubs are assem-
52-0486 — 21” 3.25” bled with bearings and correct length spacer
Since 1969
2008-17 FXD with 49mm fork without ABS tube.
52-2039 — 19” DC 2.50”
52-0899 — 19” 2.50”
52-0917 — 21” 2.15”
52-1029 — 23” 3.00”
455
Complete Chrome Wheels
52-2028
Truing
23” 52-0450
52-2029 52-0199
Nipple Tightening
52-0660
Chrome Profile Laced Wheel.

VT No. Fits
21” Front
52-0660 2000-06 FXST except FXSTS and
52-0455 52-0778 2000-05 FXDWG models
52-0555 2007-17 FXST
Profile Rimmed Wheels
52-0664
52-1030 52-0450
52-0441 52-0440 16” 52-0665

Chrome Rear Profile Laced Wheel. The profile rim is an alu-
minum rim with a smooth chrome finish.
16” Rear
VT No. Fits
52-0589 1986-99 FXST
52-0666 2003-07 Softail models
52-0667 2000-05 Dynaglide models
16” Front
52-0664 2003-06 FL Softail models
52-0554 2007-08 FLST
456
Wheel Builders
Big Twin Rear Wheel
BIG TWIN
Since 1969
Complete Wheel
Assembly features the fol-
lowing:
• Chrome Rim
• Chrome or Stainless
Spokes
• Chrome Hub with Internals
• 40 Spoke Style
52-0176 52-2011
52-2033
17” 1986-96 FXR-FXRS-FXST-FXSTC-FLST and FXDG models.

Note: FXR applications must use VT No. 44-0421 seal spac-
ers.
52-0176 52-0810** 16” 3.00”
52-0215 52-0216 16” 3.50”
52-0861* 52-0862*/** 16” Deluxe 3.00”
52-0935 52-0936* 16” 4.00”
52-2042 — 16” 4.50”
52-2033 — 17” 4.50”
52-0198 — 18” 2.50”
52-0775 — 18” 4.25”
52-2010 52-2087 1997-99 FXD-FXST-FLST feature updated rear hub with
smooth flange area.
Directly bolts on to models listed. Assembled with all original components.
52-1076 52-1077 16” 3.00”
— 52-1079 16” 4.00”
2000-2005 FXD-FXST-FLST
52-1080 52-1082** 16” 3.00”
52-0217 52-0218 16” 3.50”
52-1081 52-1083** 16” 4.00”
52-2044 — 16” 4.50”
2006-07 FXD
52-2010 52-2011 17” 4.50”
2008-17 FXST, FLST, FXDWG without ABS
52-2041 — 16” 3.00”
52-2087 — 17” 6.00”
52-0775 18” 52-0935
2011-17 FXST, FLST, FXDWG with ABS
52-2057 16” 3.00”
1997-99 FXD-FXST-FLST Type Rear Wheel
52-2058 17” 6.00”
Wheel Bearing Greaser. Fitting 2008-17 FXD without ABS
and spigot greases 1973-99 tapered 52-2040 52-2045 17” 4.50”
bearings without removing seals. Use 2012-17 FXD with ABS
existing seal spacer or purchase sep- 52-2059 17” 4.50”
arately. 1982-84 FXE, 1982-86 FXWG, 1982-85 FXR,1984-85 FXST
VT No. Item 52-0168 52-0809** 16” 3.00”
16-0803 Tool *Note: Deluxe rims are OE type.
44-0303 Collar **Note: Polished Stainless Steel Spokes
52-2057
457
Front Wheel for 52-0171 52-0895
35 and 39 mm Fork
All front wheels on this page feature a chrome hub, with all inter-
nal bearings installed, choice of chrome or stainless spokes and
chrome rim completely laced and trued. *Note: Polished Stainless
Steel Spokes.
Chrome Stainless
Spokes Spokes Rim Diameter Rim Width
Chr. Hub Chrome Hub
1984-99 FXR-FXD with single/dual disc. Fits 35 and 39 mm
forks.
52-0170 52-0827* 19” Drop Center 2.50”
52-0171 52-0828* 21” 2.15”
52-0895 — 21” 3.00”
1984-99 FXR-FXD with single disc, fits 35mm and 39mm
forks.
52-0190 52-0192* 19” Drop Center 2.50”
52-0191 52-0193 21” 2.15”
52-1024 23” 3.00”
2000-2003 FXD with single disc forks, FXD, FXDL with 39mm
forks single or dual disc, .750” axle.
52-1086 52-1087* 19” Drop Center 2.50” 52-0191 52-0190
52-1088 52-1089 21” Drop Center 2.15” Dual
Disc only These replica wheels bolt on to stock applications as
52-2023 52-2024* 21” Drop Center 2.15” listed with no modifications.
52-1212 23” 3.00
2004-05 FXD with single or dual disc 39 mm for FXD, FXDL
with 1” axle.
52-2000 52-2001 19” Drop Center 2.50”
52-2002 52-2003* 21” Drop Center 2.15”
52-1211 23” 3.00”
Rear Billet Hub Wheel features
80 stainless spokes, chrome
billet hub and rim. *Note: For 52-0658
Right Side Drive x 300 only. Fits
18” x 10.5” rear wheel. 60 Spoke Billet Hub Wheel Assemblies feature chrome
VT No. 52-0195 plated billet hub. Polished stainless spokes and chrome rim.
Front Wheels
52-0733 1984-99 FXD-XL 19” x 2.15”
21” x 2.15” Wheel with 52-0734 2000-03 FXD 19” x 2.15”
billet front hub, stainless 52-0139 1984-99 FXST 21” x 2.15”
spokes and chrome kit. Fits 52-0737 2000-07 FXST 21” x 2.15”
1984-99 FXST with 41 mm 52-0658 1986-99 FLST 16” x 3.50”
fork and 60 polished stain-
less spokes and chrome
rim.
VT No. 52-0139
Bearing Sets for 60 spoke wheels.
VT No. Inner Diameter
12-8850 ³⁄₄”
Valve Stem. Tenzo Rear Blade
VT No. Type of Nut
28-2138 Outside
52-2901 Right Side
Wyatt Gatling Chrome Forged Billet Wheels for 1987-99 FXST. Wheels Size Fits Tenzo Blade
include adapter spacers and bearings as required. Use with 2000-up brake rotor 16” x 3.5” Rear 52-2900 52-2906
and drive pulley. 18” x 8.5” Rear 52-2901
48-0498 48-0470 48-0030 48-0033 48-0025 48-0044 48-0048 48-0372 48-1824


458
Rear Wheel Rim
BIG TWIN
52-0226 52-0692
52-0699 52-0229 52-0435 52-0303

52-0230 52-0430 52-0230 Shown Center Valve Stem Hole
52-0707 Center
52-0896
Side Hole
Valve
Hole
Rear Wheel Rims feature drop center design for bead and 40 spoke holes. Available in black, chrome or raw. Note: Large hole
accepts rubber valve stem tube. Small hole accepts metal stem tubes. *Note: Rim has small center valve stem hole all other
numbers have small side valve stem hole.
16” Rim with Large Valve Stem Hole 16” Rim with Small Valve Stem Hole 18” Rim with Center Hole
VT No. Width Brand Finish 52-0230* 3.0” Perma Chrome 52-0707 2.50” V-Twin Chrome
52-0226 3.0” Perma Chrome 52-0222 3.0” Perma Chrome 52-0229 4.25” Perma Chrome
52-0699 3.0” Perma Raw 52-1023 3.0” Perma Black 17” Rim with Center Hole
52-0692 3.0” Perma Black Gloss 52-0691 3.5” Perma Chrome 52-0435 4.5” Perma Chrome
52-0223 4.0” V-Twin Chrome 52-0228 4.5” Perma Chrome 52-0896 6.0” Perma Chrome
52-0303 4.0” Replica Chrome 52-0430* 5.0” Perma Chrome *Note: Rim has small center valve stem hole all
52-0472* 5.0” Perma Black other numbers have small side valve stem hole.
Front Wheel Rim

52-0700 52-0752 52-0788 Front Chrome Rim and Spoke Kits fit hubs
as noted. Note: For use with steel hub.
VT No. Size
52-0300 3.00” x 16”
52-0301 2.50” x 19”
52-0302 1.85” x 21”
Replica Drop Center Front Rims. 52-0790

19”
Chrome Black OEM Width Brand
52-0700 52-0234 43018-73 2.5” Perma WM Type Rim
52-0713 43018-73 2.5” DW WM1 = 1.6”
52-0752 43001-06 2.5” Perma 52-0791 WM2 = 1.85”
52-1043 41427-07 Perma
52-1041 52-1214 43001-06 3.0” Perma WM3 = 2.15”
21”
52-0748 52-1208 2.15”
52-0788 3.25” Front Smoothie Wheel Rims feature a smooth profile with
23” chrome on aluminum construction.
52-1291 3.00” Perma VT No. Size
52-0790 16” x 3.00”
52-0791 21” x 2.15”
Deluxe Chrome Front
52-0212 Wheel Rims are roll
formed of high strength
52-0702 52-0701 steel and finished with a
deluxe chrome finish. Both
80 Spoke Chrome Rim Only are drop center style with
52-0212 1.85” x 21” the rolled-edge design for
52-0704 3.00” x 16” with small stem hole added strength.
52-0705 4.00” x 16” with large stem hole VT No. OEM Size
52-0702 43001-79 19” x 2.50”
52-0701 43662-80B 21” x 2.15”
52-0748 Replica 21” x 2.15”
459
Wheel Rims All Rims are 40 hole. *Except where noted.
52-0300
52-0226 52-0699 52-0692 52-1032 52-0691
52-0223 52-0303 52-0435 52-0896 52-0208 52-0707

16”
Chrome Black Width Brand Note
52-0226 3.00” Perma, large Drop Center
52-0699 3.00” As Above, large valve stem Raw Finish
52-0692 3.00” Black Gloss, large side stem 43006-40
52-1023 3.00” Black Gloss, Small Side Stem Drop Center/2010-up XL
52-0230 3.00” Perma Small Center Valve 43085-97 Drop Center, 8.5 mm
52-0222 3.00” Perma,small 43085-81
52-0704 3.00” With small stem hole 52-0768 52-0026
52-0300 3.00” Steel, small
52-0379 52-0376 3.00” Police Wheel Rim 43006-62
52-0691 3.50” Perma
52-0223 4.00” V-Twin, large 8.5mm side Drop Center
valve stem hole
52-0303 4.00” Replica, large Drop Center
52-0705 4.00” with large stem hole
52-0228 4.50” Perma, 2010 XL Drop Center
52-0430 52-0472 5.00” Perma Rim is for use w/180-200 rear tire 52-0202 52-0977
52-0433 52-0434 Replica Kelsey Hayes
17”
52-0435 4.50” Center Hole, 40863-06 2006-17 FXD
52-0896 6.00” Center Hole, 41440-08 2008-up FXD
18”
52-0027 2.15” WM Holes may have to be enlarged for
certain spoke nipples.
52-0208 52-0785 2.15” Front Conventional 52-0785
52-1018 2.15” Steel/Chrome 1952-56 K 52-0707
52-1040 Black Rim 1930-36 VL replaces 3940-30B
52-0707 2.50” V-Twin w/Center Hole
52-0025 2.50” WM2 Alloy
52-0768 3.15” Black Powder
52-0229 4.25” Perma, Drop Center Custom application for rear fitment
19”
52-0202 1.85” Conventional Flat style and for front fitment
52-0026 2.50” H-C type, Polished Natural XL 1957-1970, WR 1941-1952
52-0028 2.15” H-C type, CV hole measures 8.5mm
52-0977 2.15” Original Style Edge, XL 1964-1972 Front fitment with drum brake, 52-0768 52-0702
FX 1971-1972 Front fitment with drum brake
52-0700 52-0234 2.50” Perma 43018-73, 1973-up XL
52-0713 2.50” DW 43018-73
52-0752 2.50” With Drop Center Hole 43001-06
52-1043 2.50” Drop Center 41427-07
52-1041 3.00” Drop Center 41427-07
52-0301 2.50” Steel For Use with Steel Hub
52-0302
52-0977 2.50” Drop Center 1964-72 XL
52-0965 2.50” Steel 1964-72 XL
52-0702 2.50” Drop Center w/center valve 43001-79 52-0212
52-0969 3.15” Steel 1952-56 XL
21”
52-0212 1.85” 80 spoke holes
52-0302 1.85” Steel Rim and Spoke Kit
52-0203 1.85” Front Conventional
52-0701 2.15” 43662-80B Drop Center
52-0748 52-1208 2.15” Replica High strength steel
52-0788 3.25” Center valve hole is 8.5mm.
23”
52-1291 3.00” Front Drop Center 1980-up FLT, 1984-up FXST 52-0748 52-0788
460
Softail Bucket Saddle
Classic Fringe 47-2022 47-0623 Installed 47-0624 Installed
BIG TWIN
CG Frame Mount Solo Seats for 1984-2005 are constructed
of black Naugahyde on steel base plate for frame mounting
47-0623 47-0624 47-0630
without springs.
VT No. Style
47-8721 Classic
47-8680 Sonora
47-2022 Fringe
47-2028 47-2026
47-0630
Installed
Victory Gunfighter Saddles feature sewn inlay of colored

flames on rear pad area with matching flame stitch and thread
in front driver area. Victory Series Saddles fit
1984-05 FXST-FLST models
2000-05 1984-99 Style/Color
and all Rigid frames. FXST-
47-2024 — Teal Flame FLST models require re-use
47-2028 — Blue Flame of existing rear tab or can
47-2029 47-0580 Aqua Flame be ordered separately, VT Butt Bucket Saddle fits Softail models. Seats include brack-
No. 31-0413 for 1984-99 or ets for direct frame mounting.
47-2030 — Purple Flame 31-0653 for 2000-14. Rigid
47-2026 47-0565 Orange Flame frames require purchase of VT No. Year
31-0562 front mount. 47-0623 1984-99
47-0624 2000-05
47-0630 2006-14
FXDWG Models 47-0987
47-0910
47-0603
47-0996
47-0987 Installed
47-0604
All Corbin-Gentry Saddles
Wyatt Solo Bucket Saddle. are constructed on a
VT No. Year metal baseplate, have a
47-0910 1996-2005 FXDWG high density molded foam 47-0776
cushion and are covered
47-0603 2006-2017 FXDWG in premium Naugahyde
47-0604 2006-2017 FXD unless noted as leather.
CG Saddles to fit Softail models. Order rear seat tab assembly

42-0147 Mid-Frame Dyna Deflector improve
separately.
rider comfort during the riding sea-
VT No. Year Type
son. Designed for severe duty and
47-0987 2007-17 Smoothie
extreme temperature applications,
47-0996 1986-05 Smoothie
these deflectors attach to the frame
47-0776 2007-17 Cobra
and surround the top of the rear
31-0653 Rear Seat Tab Assembly
cylinder head. The scoop shape
captures the moving air and uses Rubber Seat Bumper Pad Set fits
the flow to direct the heat down and most seats where they rest on the
away from rider to improve comfort. frame to protect the paint. Includes 4
Kit includes all required mounting hardware.Fits 2006-17 FXD, rubber self stick pads.
06-11 require the removal of the original equipment coil cover. VT No. 31-0374
VT No. 42-0147
461
Victory Series for 1984-05 FX-FLST & Rigid
A 47-2015 B 47-2016 C 47-2017 Victory Series Saddle fits 1984-
05 FXST-FLST models and all
Rigid frames. FXST-FLST mod-
els require re-use of existing rear
tab or can be ordered separate-
ly, VT No. 31-0413 for 1984-99
or 31-0653 for 2000-05 models.
Rigid frames require purchase of
31-0562 front mount.
Victory Smoothie Saddle is a two piece design on a single

steel baseplate.
2000-05 1984-99 # Note
47-2015 — A Concho, chrome spots
47-2016 — B Concho, black spots
47-2017 47-8695 C Fringe, chrome spots
Seat Mount Hardware

Chrome Billet Rear Set Tab fea- 37-9179
tures contoured rear shape, screw
included. Kits sit where rear tab is
fastened by two screws. 37-8902
VT No. 31-0767 Seat Mount Pins available as quick release push pin in stainless
steel or knurled aluminum in chrome or natural finish with O-Ring
and extra stud. Thread into existing seat mount hole with ¹⁄₄1” - 28
UNF threads. Replacement pin available for VT No. 37-8902.
31-0660
VT No. Type
37-8902 Quick Release with Pin
31-0653 37-9179 Chrome Knob
Black Button Set with clips, for repairing or
installing on custom seats. Set of six.
31-0661 VT No. 47-0602
31-0652
Chrome Rear Seat Tab includes chrome spring loaded screw. 31-4018
Order fender nut insert separately.
VT No. Item Year Thread
31-0413
31-0660 Tab 1982-up ¼” - 20 UNC
Chrome Seat Mount Tab. When installing a one piece seat
31-0661 Tab 1982-up ¼” - 28 UNF on 1981-84 FXR models, use VT No. 31-4017. Use 31-4018,
31-0653 Tab Assembly 2000-up on 1979-up XL seats. VT No. 31-0413 fits FXWG-FXE-FXST
31-0652 Nut Insert, 4 pack 1973-up rear. Use nylon washer under seat tab.
Seat Bracket Mounting Washers. Nylon VT No. Fits
¹⁄₄” inner diameter by ⁹⁄₁₆” outer diameter, 31-4018 Rear FXR
¹⁄₁₆” thick for 1982-up models to prevent seat 31-0413 Rear FXE-FXWG
bracket from scratching fender. Pack of 25. 37-8858 Nylon Washer, 25 Piece
VT No. 37-8858
Hardware for FXST-FLST

37-9125 FXST-FLST Seat Tab Knurled 37-0539
Screw Sets are available with
½ - 13 UNC. Screw into frame
forward of strut mount. Includes
O-ring for snug fit. Chrome Seat Mount Bolts for FXR and Road King secure rear
VT No. 37-9125 of solo. Seat rod holds front of passenger pad firmly in place
and allows quick passenger pad removal.
Seat Mount Kit consists of chrome plated
VT No. Thread Fits
buttonhead hardware and lockwashers for
37-0539 ⁵/16 - 24 UNF 1994 FLHR, 1982-89 FXR
1987-up Heritage FLST and Fat Boy.
VT No. 9915-4
462
Saddlebag Hardware
BIG TWIN
31-0968
Saddlebag Bracket Set includes left and right brackets with

31-0967
rear saddlebag stabilizer bracket for fiberglass saddlebags.
Saddlebag bracket set, bottom rail extends out 3¹⁄₂” measuring
to the center of the rail. Fits saddlebags that have underneath 31-0970
groove. Fits 1986-17 FLST only.
VT No. 49-2752
49-2751
31-9912
49-2542
Saddlebag Mount Kit. Adapts VT No. 49-2521 fiberglass
bag set to FXST-FLST models 1986-05. Instructions included.
Saddlebag mounting bracket is not included with mount kit 49-0888
31-0818
use 49-2752 for customers who have bags without brackets.
Requires turn signal bracket 31-4006 for use.
VT No. Year Finish
49-2751 1986-05 Chrome
49-2542 1986-05 Zinc
49-0462 Bracket Zinc
Fiberglass Saddlebag Rivets, pack of 50. 31-0361
VT No. OEM Length 49-0889
37-0566 90965-63 ⁵⁄₁₆”
37-0567 90966-67 ¹⁄₄”
37-0568 90967-64 ³⁄₈”
Turn Signal Relocation

31-9913
Kits includes special
hardware and extension
for models listed to pro- 31-0921
vide clearance for saddle
bags. Fits 1982-89 FXR. Chrome Saddlebag Supports are designed to fit the contour
OEM# 90504-82A. of the fender struts and protect your bags from the brake cali-
VT No. 31-9913 per and swing arm.
VT No. Bolt Year/Model
31-0361 2 1984-99 FXST
Caliper Guard mounts to axle and keeps saddle- 31-0967 2 2000-05 FXST, FLST
bags out of wheels on 1986-17 Softail, zinc plated. 31-0968 1 2000-17 FXST, FLST
VT No. 48-0177 31-0970 2 2006-10 FXST, 2007-11 FLSTF
31-9912* 2 1982-94 FXR
31-0818 2 1991-07 FXD
Black Saddlebag Support Set are 1996-17 FXDWG
designed to fit the contour of the 49-0888 2 All, Black
fender struts and protect your bags 49-0889 2 All, Chrome
from brake caliper and swingarm. 31-0921 2 2008-17 FXD, FXDWG
Supports are 2 bolt type. *Note: 1982-89 models require VT No. 31-9913 relocation kit.
VT No. 31-1571
Wyatt Gatling FXST/FLST Saddlebag Bracket Kit includes a

49-2677 49-2678
set of saddlebag adapter brackets for quick release mounting,
four bail head studs, four receptacles, four cushions, four grom-
mets, and mounting hardware for left and right sides. Brackets
allow the use of 1993-2013 FLT Saddlebags (49-3500) on
1984-17 FXST and 1986-17 FLST.
VT No. Finish
49-2677 Black
49-2678 Chrome
463
Windshield Flyscreen LS by National Cycle fea-
tures Lexan coating and bronze tint
Enhances the front end of your bike
and is made from durable high impact
National Cycle Clear Poly- acrylic material. Includes triple chrome
carbonate Deflector screen front trim plate and flush countersunk
51-0368 51-0369 LX features rake adjustment hex bolts which offers a custom fit for
and quickset mounting motorcycles with open front ends. The
hardware for 1" handlebars. bronze tint is light enough to allow the
Fits1982-1983 FXR, 1984- motorcycle details Fits all:
1994 FXR,1993-2017 FXD, 1982-94 FXR
to show through. 1993-up FXD
1984-up FXST, 1986-up Hardware includ- 1984-up FXST
FLST, 1994-up FLHR, 1971- ed. 1993-up FXST
VT No. Type 1984 FX, 1960-1984 FL, VT No. 51-0243 Size:
1957-up XL. H: 8¹⁄₂”
51-0368 Clear W: 9.75”
51-0369 Tint
Streetshield National Cycle

Streetshield Ex features 4 point ball 51-0323
socket mount with Quikset hardware. Clear Streetshield features
DOT approved. U-clamp mounting for
Size 1” handlebars. Available
H: 18” in Lexan or hard coat-
W: 19¹⁄₄” ed polycarbonate and
VT No. 51-0325 Smoke either clear or medium
Fits all: tint. Both types are DOT
1982-94 FXR approved.
1993-up FXD Size:
1984-up FXST
Fits all: H: 17”
FXSTS Windshield is trimmed with 1982-94 FXR
mechanically-applied traditional bead- W: 16¹⁄₂”
51-0294 1993-up FXD
ed lock. The highly polished chrome 1984-up FXST
mounts attach to the handlebar risers
Lexan Polycarbonate Color
to provide significant clearance for rake
and height adjustment. Fits 1989-up 51-0323 51-0366 Clear
FXSTS. 51-0324 51-0367 Medium Tint
Size: H: 13.25”, W: 20”, Overall Height: 21”
Clear DOT approved. Hardware packaged with
Lexan Shield fits 1991-05
windshield. Custom mount to handlebar risers.
FXD with 39mm forks.
VT No. 51-0294 VT No. 51-0200
Toolboxes
50-0600 50-0605 50-2025
installed
50-0604
50-0601 48-0570 FXST-FLST Toolbox Kit is chrome ribbed. Includes two keys,
mount bracket, footpeg spacer and hardware.
VT No. Item
1984-99
16-1007 50-0604* Right Side Kit
50-0603 50-1012 Left Side Kit
*Note: Fits all 1984-99 FXST models except FLSTF and
FLSTN.
Oval Toolboxes are for right side 2006-up FXD, FXDWG
50-2025 Right Side
use and include keys, VT No.
48-0570 is a leather pouch insert for
50-2025
oval tool boxes. Tools not included.
VT No. Finish Side
50-0600 Chrome Right 31-1986 31-1990 31-1991 31-1989
50-0605 Chrome Left Brackets Only for Toolbox mounting on 1984-99 Softails.
50-0601 Black Right VT No. Kit Side
48-0570 Nylon Liner 31-1986 Kit Right
50-0603 Key set 31-1990 Bracket Right (1986-99)
Order 27-0861 relocated foot
16-1007 Kit Tool, peg brackets separately. 31-1991 Bracket Left
1989-up FXST, FLST 31-1989 Kit Left
464
Windshield
BIG TWIN
51-0351 51-0356 51-0361
Switch Blade Removable Windshield allows installation or removal in four seconds without tools. Available in three sizes for three styles of riding and features 4.0
mm Lexan Polycarbonate with quantum coating in either clean or tint. Order mounting system separately.
SwitchBlade® Quick-Release Windshields Applications
Model Year Mount 2-up Chopped Chopped Shorty Shorty Deflector Deflector
Name Kit Clear Clear Tint Clear Tint Clear Tint
FX NARROW GLIDE MODELS 1993-05 31-9936 51-0331 51-0354 51-0359 51-0332 51-0333 51-0334 51-0335
with 39mm Fork Tubes
FXD/FXDL/FXDX/FXDC Dyna
FXDS Dyna Convertible 1994-00 31-9936 51-0331 51-0354 51-0359 51-0332 51-0333 51-0334 51-0335
FXLR Low Rider Custom 1988-94 31-9936 51-0331 51-0354 51-0359 51-0332 51-0333 51-0334 51-0335
FXR/FXRS Low Rider 1982-94 31-9936 51-0331 51-0354 51-0359 51-0332 51-0333 51-0334 51-0335
FX NARROW GLIDE MODELS
FXD Super Glide 2006-10 31-9947 51-0352 51-0357 51-0362
FXD 35th Anniversary Super Glide 2007 31-9947 51-0352 51-0357 51-0362
FXDC Super Glide Custom 2006-14 31-9947 51-0352 51-0357 51-0362
FXDB Street Bob 2006-15 31-9947 51-0352 51-0357 51-0362
FXDL Low Rider 2006-09 31-9947 51-0352 51-0357 51-0362
FXDL Low Rider 2014-15 31-9947 51-0352 51-0357 51-0362
FX WIDE GLIDE MODELS
FXDWG Dyna Wide Glide 1993-05 31-9937 51-0336 51-0355 51-0360 51-0338 51-0339 51-0340
FXWG Wide Glide 1980-85 31-9937 51-0336 51-0355 51-0360 51-0338 51-0339 51-0340
FXDG Glide 1983 31-9937 51-0336 51-0355 51-0360 51-0338 51-0339 51-0340
FX WIDE GLIDE MODELS
FXDWG Dyna Wide Glide 2006-16 31-9947 51-0353 51-0358 51-0363
FXST MODELS
Softail
FXCW Rocker/Rocker C 2008-11 31-9947 51-0352 51-0357 51-0362
FXST Softail Standard 1984-90/ 31-9937 51-0336 51-0355 51-0360 51-0338 51-0339 51-0340
1999-12
FXSTB Softail Night Train 1999-09 31-9937 51-0336 51-0355 51-0360 51-0338 51-0339 51-0340
FXSTC Softail Custom 1987- 31-9937 51-0336 51-0355 51-0360 51-0338 51-0339 51-0340
99/07-10
FXSTD Softail Deuce 2000-07 31-9937 51-0336 51-0355 51-0360 51-0338 51-0339 51-0340
FLS MODELS
Softail (Without Light Bar)
FLS Softail Slim 2012-15 31-9939 51-0341 51-0344 51-0345
FLST Heritage Softail 1986-90 31-9939 51-0341 51-0344 51-0345
FLSTC Heritage Softail Classic 1987-16 31-9939 51-0341 51-0344 51-0345
FLSTF Fat Boy 1990-16 31-9939 51-0341 51-0344 51-0345
FLSTFB Fat Boy Low/Fat Boy Special 2010-16 31-9939 51-0341 51-0344 51-0345
FLSTFBS Fat Boy S 2016 31-9939 51-0341 51-0344 51-0345
FLSTN Softail Deluxe** 2005-16 31-9939 51-0341 51-0344 51-0345
FLSTN Heritage Softail Nostalgia 1993 31-9939 51-0341 51-0344 51-0345
FLSTN/H Heritage Softail Special 1994-96 31-9939 51-0341 51-0344 51-0345
FLST Heritage Softail 2006 31-9938 51-0341 51-0344 51-0345
FLST Heritage Softail 1986-90 31-9938 51-0341 51-0344 51-0345
FLSTC Heritage Softail Classic 1987-16 31-9938 51-0341 51-0344 51-0345
FLSTF Fat Boy 1990-16 31-9938 51-0341 51-0344 51-0345
FLSTFB Fat Boy Low/Fat Boy Special 2010-16 31-9938 51-0341 51-0344 51-0345
FLSTFBS Fat Boy S 2016 31-9938 51-0341 51-0344 51-0345
FLSTN Heritage Softail Nostalgia 1993 31-9938 51-0341 51-0344 51-0345
FLSTN(H) Heritage Softail Special 1994-96 31-9938 51-0341 51-0344 51-0345
51-0337 SWITCH BLADE REMOVABLE WINDSHIELD 31-9939
51-0281 31-9938
31-9947
National Cycle Spartan Quick Release Windshield features a full size

quantum clear hand coated polycarbonate windshield, quick release
hardware and a black powder coated mounting frame. Available in 16¹⁄₄”
National Cycle Wave QR Fairing manufactured from dark tint poly-
and 18¹⁄₂” heights. Height is measured from head lamp cutout to top of
carbonate that features free flowing lines, adjustable rake partitioning
shield.
and quick release mounting. Order mounting hardware separately.
VT No. Height Fits Mounting Hardware
VT No. Fits Mounting Hardware
51-0284 16¹⁄₄” 1986-up FLST 31-9939*
51-0280 2006-up FXD 31-9947
51-0285 16¹⁄₄” 2006-up FXD 31-9947
51-0281 1994-up FLHR 31-9946
51-0286 18¹⁄₂” 1986-up FLST 31-9939*
51-0282* 1986-up FLST 31-9939
51-0287 18¹⁄₂” 2006-up FXD 31-9938
*Note: Will not work with spotlight bar
*Note: When installing shield with spotlight bar use 31-9938 kit
465
Beaded Shield
Beaded Heavy Duty

Windshield feature clas-
sic three piece construc-
tion. Crystal clear upper
with a clean beaded
edge. Size: H: 19¹⁄₄” to
22¹⁄₄” W: 22¹⁄₂” Clear Top,
Colored Lower, DOT
approved. Hardware sold
separately.
VT No. Color
51-0239 Clear
51-0251 Black
Fits all: Mount Kit Required
1984-up FXST 31-9932
1993-up FXDWG 31-9932
1986-up FLST 31-9934
1990-up FLSTF 31-9934
1993-up FLSTN 31-9934
Touring Heavy Duty. Maximum protection on the road. A great

look on a large cruiser.
Chopped Heavy Duty
Size: H: 19¹⁄₂” to 22¹⁄₂” W: 22¹⁄₄”
Windshield features wide
Light Tint, DOT approved. Approved for night use. Hardware
screen look with low profile.
sold separately.
A preferred choice for many.
VT No. 51-0242 Mount Kit Required
Size: H: 14¹⁄₂” to 17¹⁄₄” W: Fits all:
22¹⁄₂” 1984-up FXST 31-9932
Light Tint. DOT and night 1993-05 FXDWG 31-9932
1993-up FLST 31-9934
use approved. Hardware 1990-up FLSTF 31-9934
sold separately. 1993-up FLSTN 31-9934
VT No. 51-0300 Mount Kit Required 1993-up FLHS 31-0438
Fits all: Mid-Frame Dyna Deflector
1984-1990 FXST 31-9932 Improve rider comfort during the summer
1999-2007 FXST 31-9932 riding season. Designed for severe duty
1993-2005 FXDWG 31-9932 and extreme temperature applications,
1986-1990 FLST 31-9934 these conspicuous deflectors attach to
1986-1990 FLST 31-9934 the frame and surround the top of the
1990-2008 FLSTF 31-9934 42-0147 rear cylinder head. The scoop shape
1993-up FLSTN 31-9934 captures the moving air and uses the
VT No. 51-0302 Mount Kit Required flow to direct the heat down and away
51-0418 51-0419 from rider to improve comfort. Kit
50-0726 includes all required mounting hardware.
Fits 2006-up Dyna, 06-11 require the
removal of the original equipment coil
cover. VT No. 42-0147
Wind Deflectors mount onto fork brackets.
Chrome Black Year Fits
50-1067* 1986-17 FLST
50-0724 50-0726 1986-17 FLST
*Note: Can only be used with king size wind-
Replacement Polycarbonate Shield features pre-drilled shields or spotlamp bracket.
mounting holes for use with stock mounting hardware and is
33% thicker than original windshield Available in 20” tall clear
Chrome Tie Down Brackets mount
or 13³⁄₄” tall dark tint. Fits 2000-15 FLSTC.
to the front fork cover and provide a
VT No. Height Color
secure point to attach tie downs.
51-0418 20” Clear
Fit 1995-up FLHR, 1995-13 FLHT,
51-0419 14¹⁄₄” Dark Tint
FLHX, 2010-13 FLHTCU, 2002-up
51-0364 FLST Light Tint
FLST.
VT No. 31-0025
466
Luggage Rack for Softails
Note: Racks
BIG TWIN
50-1001 50-0236
50-1001 are designed
Installed for loads of 10
pounds or less!
Chrome FXST Luggage Racks

50-0989 fit models fitted with a bobbed
rear fender.
VT No. Year Size
50-1001 1980-99 11” x 5”
50-1101 50-0236 1984-99 11¹⁄₂” x 6”
50-0232 50-0232 2000-04 11¹⁄₂” x 6”
50-1101 2000-02 11¹⁄₂” x 5”
50-0989 2000-05 12” x 4¹⁄₂”
50-0040 50-2071 2006-up 11¹⁄₂” x 6”
50-0040 2000-up 11” x 7”
Chrome Three Channel
Luggage Racks in classic
style of the 1960’s. Fits
FXST-FLST except FLSTS.
VT No. Year
50-2071
50-1014 1986-06
Installed
50-1209 2000-06
50-1014 Installed 50-2080 2007-up
37-0978 Bolt Set
47-2523 49-2523
50-1020 50-1020 50-1210
Luggage Rack Pad measures
12³⁄₄” x 9” with quick release spring
loaded clamps to fit three channel
stock luggage racks.
VT No. Item
47-1974 Pad Kit
49-2523 Clamp Set
50-1130 FLST Year Size
50-1020 1986-2005 10.5” x 6” (Chrome) 49-0304 49-0951
50-1210 2006-2010 10.5” x 6”
FLSTF
50-1130 2005-up 10.5” x 6” FLSTF
49-0832
31-0801 31-0802
Old Style Luggage Rack is a replica of 1940’s accessory,
contours all rear fenders. Great for attaching thro-over saddle-
bags. Does not interfere with post mounted buddy or police
solo seats. 11” x 7³⁄₄” is the size.
VT No. Finish
49-0304 Polished
31-0800 49-0951 Chrome Replica
49-0832 Black
37-2096 Chrome Screw, 5 pack
National Bubble Saddlebag Hardware Kit.

VT No. Fits
31-0801 1991 FXD
31-0802 1984-2008 FXST, 1986-1990 FLST, 1987-2008 FLSTC
31-0800 1994-up XL
467
Luggage Rack
Note: Hardware Included where pictured.
50-0233 50-0990 50-2021 50-0234
Installed
50-0234
50-2021 Installed
50-1107
50-2023
50-1019
Contour Fender Racks feature steel construction for use with
solo seats for loads of 10 pounds or less. 50-2076
VT No. Fits Rack Size
50-0233 1991-04 FXD 9¹⁄₂” x 6”
50-0234 1993-05 FXDWG 11” x 6” 50-1098
50-0990 2006-17 FXDWG 10¹⁄₂” x 5³⁄₄”
Chrome Luggage Racks are fender
mounted for loads of 10 pounds or less.
VT No. Fits Rack Size 31-1739 31-1740
50-1019 1982-94 FXR 9” x 6”
1976-85 FXE
50-1107 2002-05 FXDWG 9¹⁄₂” x 5¹⁄₂”
50-2023 1991-05 FXD 9” x 6”
50-2076 2006-10 FXD 9” x 6” 50-1130 Docking Mount Kits.
50-1098 1991-01 FXDWG 9¹⁄₂” x 5” 31-1739 2006-08 FXWG
50-1529 2006-17 FXDB 31-1740 2009-up FXD
50-1130 2005-up FLST 11” x 6”
Note: Racks are designed for loads of 10 pounds or less!
Saddlebag
Saddlebags are
extra large three
buckle thro-over
available in black
only. Measures
141/2” x 6” x 12”.
VT No. 48-3127
Universal Saddlebag Kit with random

Saddlebags are large three buckle thro- key code for use with vinyl or leather soft
over style. All bags are glued, sewn and side saddlebags. VT No. 49-1420
Conchos riveted. Available black only. Measures 13”
VT No. Concho long x 5” wide x 12” high.
48-0122 Black Leather/Nickel w/tails VT No. Type
48-1667 Natural Leather/Rosette 1³/₄” 48-3128 Standard
48-1668 Natural Leather/Rosette 2”
48-0198 Brown with Nickel A Chrome Star Washers for dressing
48-1433 Chrome Concho up seats and saddlebags. Sold in a
10 pack.
Nickel Spoons for dress VT No. Item
up or replacement on 37-1954 Stars (A)
saddlebags. Sold in pairs. B 37-0501 Krommets (B)
VT No. 37-8927
468
Classic 1915-1983 Index
CABLE CONTINUED CLUTCH CONTINUED
A
Clutch......................................................718 Pressure Plate.........................................546
ADVANCE UNIT.............................661,662,663
Heat Shrink Wrap....................................685 Pushrod (4 Speed)...................................545
AIR CLEANER......................................699-704
Spark Plug.......................................672-673 Release (4 Speed)...................................551
Velocity Stack..........................................699
Speedometer..................................721,722 Rivet......................................................1316
AIR FILTER..............699,700,701,702,703,704
Throttle......................................716,717,719 Rocker..............................................564-565
ALLEN SCREW LIST................................1319
Wire Loom..............................................686 Rod/Pawl...................................550,551,564
ALTERNATOR
Wrap(Chrome).......................................717 Spring........................................547,548,550
Conversion Kit...........................688,690,691
CALIPER...........................................584-589 Throwout.................................................556
Ring Replacement................................1263
Caliper Front.............................584,588,589 COIL........................................664,669,670,671
AXLE....................................................765-767
Caliper Rear.......................584,585,586,587 CONDENSER..............................................668
B Rebuild....................................................587 CONNECTING ROD....................................484
BACKREST..................................................642 CAM......................................................496-498 CONNECTOR(Wire).........................1299-1301
BAFFLE................................................659,660 Bearing....................................................498 COTTER PIN LIST.....................................1316
BATTERY..............................................695-698 Bushing(OHV).........................................498 COUNTERSHAFT
Box .........................................................695 Bushing Replacement Service...............1264 4 Speed...................................................533
Cable.......................................................697 Chest Kit.................................................499 Sprocket(Rear)........................................552
Carrier......................................................695 Cover..............................................494,495 COWL..........................................................605
Cover/Side/Top........................................698 Gasket/Sealer......................................495 CRANKCASE......................... 480,481,515,801
Eliminator.................................................689 CAPS Bearing...................................................486
Terminal Hardware.....................695,696,697 Axle.........................................................7 Breather Kit.............................................493
BEARING
CLASSIC
68 Chrome...................................................723 CRANK PIN.................................................485
Ball........................................................493 Gas..............................726,1199-1204,1228 CRANKSHAFT............................................497
Cam…..............................................493,498 Hub.........................................................768 Balancing Service.................................1263
Fork Stem...............................................607 Oil...........................................................740 CUSTOMIZER KIT.......................................750
5 Speed Mainshaft....................................537 CARBURETOR….................................704-715 CYLINDER
Inner Primary...........................................752 Bendix.....................................................710 Base Nut(1936-85)..................................520
Pinion...............................................487,488 Cable....................................716,717,719 Boring Service.......................................1260
Rod....................................485,486,488,489 Dell’Orto.........................................711 Gasket..............520,521,524,525,1308,1312
Throwout...…..........................................556 Intake..........................................714,715 Knucklehead............................................521
Wheel...............................................760,763 Jet....................................................711 Shovelhead/Panhead..............................520
BELT BUCKLE........................1325,1326,1329 Keihin........................................711 Sleeving................................................1260
BELT DRIVE Linkert..............................................704-709 Top End Kit (Shovelhead).......................510
Belt...................................................558,559 Linkert Rebuild Service..........................1263
D
Drive Kit...........................................558,559 Manifold...........................................714,715
DASH....................................................728-731
Pulley................................................560,561 Mikuni................................................713
Decal.......................................................728
BIKE KITS.....................................624,625-627 Tillotson...........................................710
Divider.....................................................730
BOLT LIST.................................................1319 CASE......................................480,481,515,818
Wiring...............................................686,732
BOOKS.............................................1268-1270 Case Boring Service.............................1263
Dash Panel.........................728,729,730,731
BRAKE Race/Rollers............................................493 Oil Tank...................................................741
Cable.......................................................594 Seals.......................................................486
DECO TRIM..........................................617,773
Caliper Front.............................584,588,589, CHAIN
DIPSTICK.............................................738,740
Caliper Rear.......................584,585,586,587 Adjuster........................................555
DISPLAY STAND.......................................1266
Caliper Rebuild........................................587 Adjuster(Primary)................................553
DOWEL PIN LIST.......................................1316
Caliper/Wheel Kit....................................584 Diamond..........................................554.557
DISTRIBUTOR...............................665,666,667
Disc (Rotor).................585,588,589,590,591 Drive System.............................554,558,559
DRAIN PLUG
Drum.........................................574,575,578 Guard......................................................561
Engine..............................................480,540
Drum Sprocket Service..........................1263 Masterlink.............................................557
Fork......................540,595,596,598,600,603
Fittings/Bolt........................574,580,581,592 Oiler........................................................554
Oil.............................................480,540,742
Forward Control..................572,573,576,577 Primary....................................................554
DRESS UP KIT............................................723
Glide.................................................593,595 Tensioner...............................................553.
Hose .......................................................580 CHAIN GUARD.............................................622 E
Hydraulic.................................................578 CHOKE CABLE...........................................719 ELECTRICAL
Lever........................................................570 CIGARETTE LIGHTER........................608,1024 Battery..............................................695-698
Line...........................................580,581,582 CIRCUIT BREAKER....................................691 Circuit Breaker........................................685
Master Cylinder(Front).........1044,1045,1048 CLAMP Coil.....................................664,669,670,671
Master Cylinder(Rear)......................573,579 Cable...............................................720 Flasher....................................................684
Mechanical..............................................574 Exhaust......................647,648,649,650,651, Fuse Holder.............................................685
Pad..................................................577,592 .................................653,654,657,659 Ignition.........................662,663,664,669,671
Pedal...........................564,565,574,576,577 Hose............................................1197,1198 Spark Plug.........................672,673,674,675
Pedal Pad.........................................562,573 Intake Manifold........................................715 Starter..................................676,677678,679
Rivet..............................................580,1316 Wire Loom............................................681 Switch........................................682,683,684
Rotor........................... 585,588,589,590,591 CLEANER..................................................1271 Terminal..................................................685
Shoe/Spring.....................................574,575 CLUTCH Wiring...............................................686,687
Sprocket(Rear).......................................584 1941-E1984 FL-FX..................................545 EMBLEM....................................773,1205,1206
Swingarm Brake Kit................................585 Cable.......................................................718 Mount....................................................1206
Switch.......................................573,580,684 Collar................................................547,548 ENGINE
Tee/Tube................................................582 Control(Handle)....................718, 1036,1038 Bar..........................................................620
BREATHER Bushing List........................................1307
Drum.................................................546
Valve Machining Service........................1264 Hub...........................................545,547,548 Case..................................480,481,515,800
BUSHING LIST..........................................1307 Jockey........................................564,565,566 Drain Plug........................................480,541
Equalizer Plate........................................561
C Lever............................564,566,567,569,570 Flywheel....................................482,483,514
CABLE Mousetrap Eliminator..............................551 Gasket List...................................1308-1315
Battery...................................................697 Pack Kit...................................................546
Head................................................524-525
Brake...................................................594 Pedal................................................564,565
Knucklehead...........................................524
Carburetor.................................716,717,719 Pedal Pad................................................577
Long Block............474,475,476,477,478,801
Choke......................................................719 Plate..........................................545,546,549
Mount...............................................479,515
Clamp......................................................720 Police Kit..........................................549,566
469
ENGINE CONTINUED FORK CONTINUED GASKET CONTINUED
Panhead............................................476,483 Internals..................................................600 Ignition...................................................1308
Race........................................................486 Leg Assembly....................................595,596 Inspection..............................................1310
Remanufacture Service.........................1260 Leg Bushing Service...............................1265 Manifold.................................................1313
Roller.......................................................484 Leg Sets...........................................596,597 Master Cylinder......................................1312
Seal................................................486,1316 Lock Tab.........................................536,1317 Oil Pump...................................491,1309
Sealant............................................480,1271 Neck Kit............................................606,607 Pushrod........................................504,1309
Short Block..............................................478 Nut (Top).................................................606 Primary...........................1309,1310
Shovelhead......................................477,478 Oil..........................................................1272 Rocker...................................................1308
Skid Plate.................................................621 Panel.......................................................605 Sealant..........................................480,1271
Spacer......................................................488 Plug.............................595,596,598,600,603 Tail Lamp...............................................1312
Sprocket..….............................................552 Riser..........................................608,784,785 Tappet Guide...................................503,1310
Stroker Kit................................................483 Seal.........................................................602 Top End......................523-524,1308,1312
Throwout Bearing....................................556 Slider..........................................596,598,599 Transmission...........................537,541,1311
EXHAUST..............................................643-660 Spring Fork.......................................777,778 GASKET KIT
Baffle.................................................659,660 Spring Fork Rebuild Service...................1265 Bendix.....................................................710
Clamp..........................647,648,649,650,651, Spring......................................................601 Keihin......................................................711
............................................653,654,657,659 Stem Nut/Cover.................................598,606 Knucklehead.....................................521,524
Components(1948-69).............................641 Triple Tree.........................................598,604 Linkert.......................................706,707,708
Cross Over........................................641,646 Tube and Slider..................................598,599 Panhead...........................................520,525
Dual...........................................646,647,649 FORK TUBE.................................................599 Shovelhead.............................................525
Extension..........................................654.655 FORWARD CONTROL........... 572,573,576,577 Transmission(4 Speed)...........................537
Fishtail......................................................654 Jockey........................................563,564,565 GAUGE.....................733,734,735,736,737,745
Flex Cover................................................650 FRAME Dipstick............................................738,740
Gasket.....................................................660 Bike Kit...............................624,625,626,627 Oil............................................................745
Heat Shield..............................................658 Component.......................................636,637 Speedometer.............. 733,734,735,736,737
Knucklehead............................................648 Covers...................................................1220 Tachometer.......................................733,734
Mount..................................648,651,653,659 Fork and Frame Kit..................................628 GENERATOR…....................................690-694
Muffler...................646,648,652,653,656,657 Guard/Bar................................................620 Conversion.......................................690,691
Panhead............................................650,651 Hardtail....................................................635 GOGGLE...................................................1271
Port Replacement..................................1265 Hallmark..................................................632 H
Repair......................................................660 Knucklehead.....................................630,631 HANDLEBAR...........................1017-1027
Shovelhead.......................................644,645 Neck........................................................637 Controls/Switch.......................1044-1046
Tip.......................................644,653,654,656 Pan/Shovelhead(Rigid)....................629,633 Cover........................................1088
Upsweep...................................................645 Rolling Chassis........................................627 Damper........................594,600,1035
F Skid Plate................................................621 End Plugs..........................................1087
FENDER................................................610-617 Stand.......................................................621 G l i d e . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 0 4 , 6 0 8
Dress Trim................................................616 Swingarm (Frame)...................................634 G r i p. . . . . . . . . . . . . . . . . 6 0 9 , 7 8 6 , 1 0 8 1 - 1 0 8 7
Emblem.............................................611,773 Swingarm................................................640 L e v e r . . . . . . . . . . . . . . . . . . . . . . . . 7 1 6 , 7 1 7 , 7 1 8
Front...........................................610,611,612 Wishbone.................................................632 Riser...........608,1028-1032,1033,1034
Glide........................................................610 FRONT END T h r o t t l e . . . . . . . . . . . . . . . . 7 1 6 , 7 1 7 , 7 1 8 , 7 1 9
Light.....................................1126-1129,1166 Damper.............................................594,600 Wiring...............................687,1043,1046
Mud Flap..................................................612 Glide................................. .593,595,604,608 HANDLEBAR GRIP.............609,7861081-1087
Pad(Seat)...............................................1254 Spring Fork...................................... 777,778 HANDSHIFT..................................567,568,569
Rail..........................................................616 Spring Fork Rebuild................................1265 HARDTAIL...................................................635
Rear..................................................613-615 FUEL HEADLAMP............1088-1090,1092-1108
Rivet................................................612,1316 Filter......................................................1198 Bates..............................................1103
Spring Fork..............................................612 Line..............................................1197-1198 B r a c k e t . . . . . . . . 1 0 9 6 , 1 1 0 0 , 1 1 0 4 , 1 1 0 7 ,
Strut...................................................614,615 Petcock.........................................1193-1196 ................................1108,1109,1216
Trim/Tip.................611,612,613,614,616,617 Shut Off.........................................726,1196 Bulb.................1093,1094,1093,1095
FILTER FUSE HOLDER............................................685 ..................................1098,1100,1105,1106
Air........................699,700,701,702,703,704 G Connector............................1088,1106,1107
Fuel.......................................................1198 GAS Cowl.............................605,1088,1092
Oil....................................................746-748 Cap........................724,726,1199-1204,1228 Cycle Ray......................................1096,1105
FLASHER.....................................................684 Divider.....................................................730 Fork Cover Set.............................605,1094
FLYWHEEL.................................... 482,483,514 Emblem.................................725,1204,1205 HID..................................................1096
Balancing Service..................................1262 Gasket (Cap).........................................1312 Internal.................................1088,1097
Remanufacture Service..........................1261 Line..............................................1197,1198 Rim.................1088,1089,1090,1092,1094
Stroker Kit................................................483 Mount.............................................. 726,727 .......................................1095,1097
FOOTBOARD....................................1074-1088 Petcock........................................1193-1196 Spring Fork...................................1096,1097
FOOTPEG.....................1056-1070,1072 Repair/Sealant.......................................1271 Visor/Trim........................1088-1095,
Extended..........................1052,1064 Shut Off..........................................726,1196 .........................1131,1132,1135,1149,1162
Folding.......................................1062 Tank.................................................724,725 HEAD
Heel Rest............................................1059 Trim.........................................................725 Bolt............................................508,513,515
Mount(Replica)........1052,1053,1054, GASKET...................................1308-1313 Gasket........................... 524-525,1308,1312
....................................1059,1068 Air Cleaner.............................................1313 Knucklehead............................................524
Relocate.....................................1070 Cam Cover..................................495,1313 Panhead..................................................525
FORK.....................................................595-607 Carburetor.............................................1313 Remanufacture Service.........................1264
Adjustable...............................................595 Cometic.................................................1313 Shovelhead..............................................525
Boot.........................................................601 Cylinder.......520,521524-525,1308,1312 Top End Kit (Shovelhead)........................525
Brace.................................................598,602 Derby Cover.........................................1310 HEAT SHIELD.............................................658
Cover............................596,598,601,605,608 Distributor Base......................................1310 HELICOIL SERVICE..................................1264
Cowl.........................................................605 Engine.....................524-525,1308,1312 HIGHWAY BAR.................................1052,1054
Damper/Knob...................................594,600 Exhaust........................................1310 HORN...............................................1167-1172
Drain Plug........................................598,600 Gasket List...................................1308-1313 Switch......................................................682
Glide..................................................604,608 Gas Tank Cap.......................................1312 HOSE....................................................580,744
Headlamp Cowl.......................................605 Generator..............................................1312 HUB...............................................762,763,764
Installation Kit...................................596,597 Head........................................524-525,1309 Cap.........................................................768
470
HUB CONTINUED MAINSHAFT PIN LIST.....................................................1316
Clutch......................................................547 4-Speed............................................531,532 Dowel.....................................................1316
I Countershaft............................................533 PINION..................................................487,489
IGNITION…..…..............................661-669,671 Gasket..............................................532,537 Cage/Roller................................480,483,487
Advance Unit..............................661,662,663 Seal/Spacer.............................................537 Hardware ..................................486,487,489
Coil............................................664,669,671 MANIFOLD...........................................714-715 Shaft........................................................487
Condenser...............................................668 MANUALS........................................1268-1270 PIPES....................................................643-660
Digital.......................................................664 MARKER LAMP.......................1145-1148,1151 PISTON..........................................483,522,523
Distributor..................................665,666,667 MASTER CYLINDER Panhead/Shovelhead Kit..........................520
Electric Start Kit.......................................665 Front.....................................1044,10451048 Ring.........................................................522
Magneto........................................1303-1306 Rear..................................................573,579 Stroker Kit/Big Bore..................................483
Module.....................................................664 Rebuild...........................................579,1048 PLUGS
Points.......................................................668 MIRROR............................................1173-1192 Case........................................................480
Spark Plug.......................... 672,673,674,675 Metric Adapter.......................................1192 Handlebar End Plug...............................1087
Switch…..................................................683 MODULE…....................................662,663,664 Fork.............................595,596,598,600,603
System…..........................................662,664 MOTOR MOUNT....................................479,515 Magnetic...........................................540,742
Timing Plug.......................................480,662 MOTOR PLAQUE......................................1328 Oil Tank.............................................540,542
Tune Up....................................................669 MOTOR SHOP SERVICES................1260-1265 Spark.........................................668,674,675
Weight Spring...........................................663 MOTOR SHOP SERVICE Timing...............................................481,662
Wiring…............................................686,687 Alternator Ring Replacement.................1263 Transmission Fill......................................540
INDICATOR LAMP............................1104,1165 Breather Valve Machining......................1265 POINTS........................................................668
INSPECTION COVER..................................754 Cam Bushing Big Twin...........................1264 Conversion Kit..........................................663
INSPECTION TAG......................................1119 Case Boring...........................................1263 Cover…....................................................661
CLASSIC
INTAKE.................................................714-715 Crankshaft Balance................................1263 POLICE
Cylinder Boring......................................1260 Decal.......................................................566
J
Cylinder Sleeving...................................1260 Shifter......................................................566
JET…….................................................711,713
Engine Remanufacture...........................1260 Siren........................................................566
JOCKEY..................................534,563,565,566
Exhaust Port Replacement.....................1265 Speedometer...........................................737
K Flywheel Balancing................................1262 POLISH/CLEANER....................................1271
KEY CHAIN/KEY HOLDER...............1324,1325 Flywheel Assembly.................................1261 PRIMARY..............................................749-752
KEY............................................................1317 Flywheel Remanufacture........................1261 Bearing....................................................752
KIT BIKE........................................624,625-627 Fork Leg Bushing Install.....................1265 Case Saver…....................................678,752
KICKSTAND…......................................618,619 4/5 Speed Rebuild.................................1265 Chain/Oiler….............................554,752,756
KICKSTART..........................................541-544 5/6 Speed Conversion Service...............1265 Chain Tensioner.......................................553
Arm..........................................................542 Head Remanufacture.............................1264 Derby.........................................753,754,755
Bushing.............................................539,541 Head Resurface.....................................1264 Dress Up Kit.............................................750
Conversion...............................................538 Linkert Rebuild Service.......................1263 Drive Kit...................................................554
Cover....................................................…541 Long Block Remanufacture...................1260 Equalizer Plate........................................561
4 Speed....................................................538 Magneto Rebuild....................................1294 Gasket............................750,752,1309,1313
Pedal…....................................................543 Short Block Remanufacture...................1260 Inner..................................................751,756
Ratchet(Gear)..........................................535 Spark Plug Helicoil Service..................1264 Inspection Cover...............................754,755
Shaft........................................................539 Spring Fork Rebuild................................1265 Outer.................................................749,755
3 and 4 Speed..........................................539 Transmission Remanufacture.................1265 PULLEY........................................................560
KROMMET.................................773,1143-1144 Valve Seat Service.................................1264 PUSHROD......................................502,503,504
L Wheel Truing/Build….............................1265 Clutch...............................................550,551
LAPEL PIN.................................................1324 MUD FLAP...................................................612 Cover................................................504,514
LENS............1096,1114,1117,1131,1133,1135, MUFFLER.............................................643-657 Engine..............................................502,504
.............................................1136,1149,1150 N Knucklehead............................................514
LEVER.........................................................570 NECK CUP KIT.....................................606,607 Seal.........................................................504
Handle Assembly..................1036,1037,1038 NUT LIST...........................................1321,1322 R
LICENSE HOLDER...................1141,1142,1144 RACE
O
LIFTER/TAPPET............................500,501,503 Case........................................................487
O-RING LIST..............................................1314
Base(Knucklehead).................................501 Rod..........................................................485
OFFSET KIT.................................................556
Base(Panhead/Shovelhead)....................501 RAIL
OIL
LIFT............................................................1273 Fender......................................................616
Cap ..................................................490,740
LIGHTS.....................................1091-1169 Sissy Bar..................................................641
Cooler...............................................745,747
Bar.............................................1153 RATCHET TOP...............................534,535,563
Dipstick.............................................738,740
Bulbs..............1094,1095,1096,1097,1098 REFLECTOR.............................................1163
Drain Plug...............................................540
..............................1101,1137-1138,1165 REGISTRATION TAG.................................1119
Filter...........................................746,747,748
Fender..........................1126-1129,1166 REGULATOR.................................689,691,694
Fitting....................741,742,743,744,745,746
Gasket..................1117,1134,1135,1162 RELAY..........................................................694
Gauge...............................................740,745
Headlamp.......................1092-1108 Generator…............................................694
Line...................741,743,744,746,1196,1197
Indicator..........................1104,1165 Starter......................................................681
Line (Knucklehead)..................................741
Marker............1145-1148,1151,1154 RIM…....................................................759,761
Oil (Quarts)............................................1272
Reflector....................................1166 Pressure..................................................745 RING...........................................................522
Signal.....................1154-1164,1218 Pump................................................490-493 RISER............................................608,784-785
Spotlamp..........................1109-1114 Seal…......................................................491 Spring Fork.........................777,778,784,785
Tachometer/Speedometer........1165 Tank..................................................738-739 RIVET...........................................580,612,1316
Tail Lamp.................................1115-1135 Tank Mount Hardware..............................740 Brake...................................................1316
Turn Signal..............................1152-1161 ROCKER
LINKERT CARBURETOR.....................705-709 P
Arm.........................................506,512,514
LOCK TAB LIST........................................1317 PATCHES (CLOTH).........1323,1326,1327,1328
Box/Line(Shovelhead).............................508
LONG BLOCK SERVICE..........................1260 PARTS MANUAL..............................1268-1270
Cover.......................................................509
LOCKWASHER.....................................1320 PEDAL PAD..................................583,587,1069
Knucklehead.....................................512,513
LUGGAGE RACK..........................642,772,774 PEG.............................................1054-1072
Nut...........................................................511
PETCOCK.......................1193,1194,1195,1196
M Overhead Oiler.........................................744
Screen...................................................1195
MAGNETO........................................1303-1306 Panhead..................................................509
PILLION PAD.............................................1254
Shovelhead..............................................508
471
ROD SPRING TOOL ROLL...............................................1267
Bearing/Roller...................................484,485 Brake Pedal......................................574,575 TRANSMISSION...................................526-537
Brake................................................574,575 Clutch........................................547,548,550 Adjuster Kit.............................................529
Clutch......................................................569 Fork..................................................601 Bushing List..........................................1307
Connecting…...........................................492 Kick Starter...............................................541 Case........................................................528
Roller Cage.......................................484,485 Kickstand.................................................619 Drain Plug................................................540
Shift...........................................550,567,568 Relief Valve...............................................483 Fill Plug...................................................540
ROLL PIN LIST..........................................1316 Valve.................................................511,519 4 Speed.........526,527,528,529,530,536,537
ROLLER SPROCKET....................................552,555,556 5/6 Speed Conversion.............................527
Cage.................................................484,485 Bolt Kit.....................................................557 Gasket.....................................................537
Countershaft............................................487 Compensator...........................................552 Jockey.................................563,564,565,566
OHV.........................................................486 Countershaft............................................555 Kick Starter..........................541,542,543,544
Tappet…..................................................500 Engine.....................................................552 Lock Tab...................................................536
Transmission............................................533 Nut...........................................................561 Mount Plate..............................................529
ROLLING CHASSIS.....................................627 Offset...................................................556 Neutral Switch….......................................684
ROTARY TOP...............................................534 Rear…...................................................556 Oil Seal Kit (4 Speed)................................537
ROTOR Shaft...............................................483,486 Plugs........................................................540
Brake...........................585,588,589,590,591 Transmission............................................555 Ratchet Top..............................................535
S STARTER…..........................................676-681 Rebuild Hardware....................................541
SADDLEBAG.................................770,771,773 Conversion Kit..........................................676 Remanufacture Service.........................1265
Relocation (Signal).................................1218 Cover.......................................................676 Rotary Top…............................................534
Trim and Rail.....................................770,771 Drive.................................................678,679 Seal.........................................................537
SCREW LIST..............................................1322 Housing............................................678,679 Shift Pawl.................................................536
SEAL LIST........................................1315,1316 Lever Starter System................................680 Sprocket/Nut............................................555
SEALANT............................................480,1271 Relay....................................................…681 TRIPLE TREE.......................................598,604
SEAT Repair Kit (Prestolite)...............................677 TUBE (Tire)…............................................1213
Buddy...........................................1248-1249 Shaft.................................................678,679 TUNE UP…..................................................669
Rear Pads.....................................1235,1254 Solenoid...................................................680 TURN SIGNAL..................................1152-1158
Rigid...........................................1240 STATOR.......................................................688 Canceler...............................1163,1164
Solo..........789,1231-1240,1244,1245,1246 STROKER....................................................483 Equalizer................................1163,1164
Springs..............1241,1243,1244,1252,1253 STRUT...................................................614,615 Fork Tube Mount.................................1159
SERVICE MANUAL...........................1268-1270 STUD LIST.................................................1317 Flasher.......................................1163
SHIFT SUSPENSION...................................... 638,639 Gasket........................................1162
Arm...................................................534,570 SWINGARM..........................................634,640 Mount........................1159,1160,1161
Bracket….................................................571 SWITCH................................................682-684 Relocate..............................116
Fork (4 Speed).........................................536 Brake.......................................................682 V
Forward Control..........................572,573,577 Dimmer....................................................682 VALVE
Hand........................................................567 Directional...............................................682 Cover(Panhead).......................................507
Jockey...............................................565,566 Flasher.....................................................684 Guide.........................................511,516,518
Knob........................................................562 Handlebar................................................682 Keeper.....................................................511
Lever.......564,565,566,567,569,570,571,574 Hi-Low......................................................682 Seat..................................................511,519
Linkage/Rod.....................................570,572 Horn.........................................................682 Spring......................................................518
Mousetrap................................................569 Ignition.....................................................683 Valve Seat Service................................1264
Pad(Shift Pedal).........................563,570,577 Neutral.....................................................684 VELOCITY STACK.......................................699
Pawl.........................................................535 Oil Pressure..............................................684 VOLT REGULATOR.......................689,691,694
Peg..........................................................570 Universal..................................................682 W
Replica Kit................................................566 T WASHER LIST..................................1320,1322
Rod…….....................................564,566,567 TACHOMETER…..................................733,734 WHEEL.................................................757-768
Slap Stick..........................................535,565 TAIL LAMP.....................1115-1136,1138,1139 Assembly...................................758,759,760
SHIM LIST..................................................1307 Assemblies...........................1115-1137 Axle............................................765,766,767
SHOCK…..............................................638,639 Bulb.....................................1131,1138 Hub............................................762,763,764
SHOP SERVICES.............................1260-1265 Connector.....................................1118 Hub Cap...................................................768
SHORT BLOCK...........................................478 Fender Mount.............1119,1126-1129,1130 Rim...................................................759,761
SHOW BIKE KITS........................................723 ...........................1131,1132,1134,1135 Seal.........................................................762
SIGNAL.................1152-1161,1162,1163 Lens...........................1134,1135-1136 Spoke................................................757,761
SIREN..........................................................566 License Bracket...................1139,1140,1141 Spool............................................1214-1215
SISSY BAR..................................................642 Side Mount....................................1119-1125 Star Hub and Rebuild.........................758,764
SKID PLATE.................................................621 Tombstone.....................1129,1131,1132 Truing/Building Service..........................1265
SKULL STUFF...................................1012-1016 Vintage..............................1128-1134 WIND DEFLECTOR.....................................775
SLAP STICK.........................................535,565 Wiring............................................1118 WINDSHIELD.......................................774-776
SLIDER.................................................598,599 TAPPET..........................................500,501,503 WIRING
SOLENOID..................................................680 Seal.........................................................503 Braided Wire............................................686
SPACER LIST............................................1320 Knucklehead............................................514 Connector.....................686,1299,1300,1301
OHV Internal...........................................488 Oil Screen.................................................493 Dash.......................................................686
SPARK PLUG......................... 672,673,674,675 Panhead/Shovelhead.......................500,501 Handlebar (Control).......................1043,1046
HeliCoil Installation................................1264 TERMINAL BOARD....................................685 Harness..................................................686
Wire.................................................672,673 THROTTLE...........................................716-720 Pins/Sockets........................1299,1300,1301
SPEEDOMETER....................721-722,735-737 Cable........................................ 716,717,719 Shrink Wrap Tubing..................................685
Bezel.......................................................736 Internal....................................................716 Spark Plug........................................ 672,673
Knobs......................................................736 TIMING Tail Lamp...............................................1118
Tin Faces................................................736 Advance Unit.............................. 661,662,663 Terminal…...............................................685
Drive Units..............................................722 Plug..................................................481,662 Wire Loom Clip........................................681
SPOKE……..........................................757,767 TIRE..................................................1207-1212 WRIST PIN...................................................523
SPOOL WHEEL................................1214-1215 Tubes.....................................................1213
SPOTLAMP.......................................1109-1114 Weights.................................................1213
SPRING FORK.....................................776-791 Valve Stem Covers................................1213
Fender.....................................................612 TOOL BOX...................................................633
Rebuild..................................................1265 TOOL KIT…...............................................1267
472
FLAT HEAD/SIDE VALVE
A J SPROCKET........................................810
AXLE....................................765,767,813 JIFFY STAND......................................811
T
B K TAPPET...............................................800
BATTERY/BOX...................................812 K MODEL..............................818,819,820 TOOLBOX...........................................812
BELT BUCKLES......................1325,1326 Army.........................................815,818 THOR..................................................824
BOLT KIT............................................793 KEY CHAIN/KEY HOLDER.....1324,1325 TRANSMISSION..........................808,809
BRAKE...............................................792 KICKSTAND.......................................811
Cable(Spring Fork)....................790,791 KICK STARTER...........................808,809 V
Servi-Car.........................................814 VALVE.................................................800
L VL MODEL..........................................817
Spring Fork.............................789-791
LAPEL PIN........................................1324
BOOKS....................................1268-1270 W
LIFTER................................................800
C LINKERT.............................................705 WHEEL..............................................792
CABLE BRACKET.............................813 WIRING...............................................815
M WRIST PIN..........................................799
CAM....................................................798
MANUAL..................................1268-1270
CAP
MAINSHAFT................................809
Oil.............................................803
MILITARY............................................815
CARBURETOR...................................804
MUFFLER.....................................
CASE..................................................801
CLASSIC
Race/Rollers.............................794,795 O
CHAIN AND GUARD..........................810 OIL
CLOTH PATCH......1323,1326,1327,1328 Cap..................................................803
CLUTCH....................................806,807 Dipstick............................................803
C O U N T E R S H A F T. . . . . . . . . . . . . . . . . . . 8 0 9 Line.................................................805
CRANKCASE.....................................801
CRANK PIN........................................794 P
CRANKSHAFT...................................796 PATCH (CLOTH)....1323,1326,1327,1328
CYLINDER..........................................799 PEDAL PAD..............................808,1071
PINION................................................798
D PISTON...........................................799
DISTRIBUTOR....................................798 Ring.................................................799
E PRIMARY.....................................812
EARLY TOOL....................782,1287,1289 R
ECLIPSE HUB....................................824 RACE..................................................795
ENGINE RING...................................................799
Components....................................793 ROD.............................................792,805
Gasket.............................................793 Brake...............................................792
Guard..............................................811 ROLLER................................795,797,809
Head........................................793,799
Sprocket..........................................810 S
EXHAUST............................................816 SCALE MOTOR MODEL..................1324
SEAT............................................818,820
F SERVI-CAR.........................................814
FENDER.............................................802 SHIFT............................................
FLAT HEAD........................................799 SIDECAR..........................................821
FLYWHEEL.........................................794 SIDE VALVE..............................793-813
FRAME...............................................813 SPEEDOMETER.................................813
Components....................................813 SPRING FORK
Stand...............................................811 Axle.........................................765,767
G Brake..........................778,789,790,791
GAS TANK..........................................803 Damper................................779,780
GASKET Fender.............................................779
Flathead...............................1308-1312 Fork..............777,778,779,781,782,783
K Model..........................................818 Grip.................................................786
GENERATOR CONVERSION.......805,823 Handlebar............784,785,786,787,788
Headlamp....................................1096
H Hub Cap..........................................780
HANDSHIFT.......................................805 R e bu i l d . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 6 5
HEADS................................................793 Shock/Ride Control......................779
HUB...................................................824 Throttle/Cable.........................787
HUMMER MODEL..............................818 Tree/Riser.................................784,785
I Windshield......................................775
INDIAN (1902-1953)....................822-824 SPRING
INSPECTION COVER.........................812 Kick Starter......................................810
Valve...............................................800
473
V-Twin Mfg. Knucklehead Engine
10-1350 10-1350
V-Twin...
• First introduced the complete Knucklehead
Engine in 2002.
• 100% V-Twin!
• Completes our line up of Replica Engines,
with the first being the Panhead in 1998,
10-1350
followed by the Shovelhead in 1999!
10-1350
10-1985
Knucklehead 87” Alternator-Generator Long Block

• Features alternator left case and generator right case.
• Every long block is assembled with S&S crankcases, Sifton 10-1983
oil pump, S&S 4⁵⁄₈” flywheels, Timken main bearing, Sifton
Knucklehead lighting cam, matched pinion gear, Torrington cam
needle bearing and Torrington main pinion bearing.
• Cylinders are Motor Shop Ready Brand pre-fitted with forged
8.25:1 pistons.
• Cylinder heads are Motor Shop Ready brand fitted with Sifton
valves, springs and collars. Heads feature stock intake and
exhaust ports.
• Each 87” long block is assembled with a natural finish cam
cover, natural finish lifter block, automatic advance distributor and
solid lifters.
• Every long block is pre-run & tested for proper oil pump pres-
sure.
•Sprocket shaft is correct length for 1970-up 4 or 5 spd trans assy.
VT No. Item
10-1983
10-1985 Engine
31-0735* Top Mount
*Note: Allows installation of Knucklehead engine in Evolution
frames. Raw finish
474
Replica Knucklehead Engine
10-1988
CLASSIC
Details of 10-1988
Replica V-TwinTM Mfg. Knucklehead Long Block

• Shipped fully assembled less carburetor and generator and
shop tested for oil pressure.
Components used in the assembly include:
• Crank Case Replica V-Twin Mfg. with authentic cast pro-
files. Including relay and number bosses.
• Rocker Boxes with natural finish and overhead oiler provi-
sion from timing cover.
• Heads newly casted Knuckleheads with parkerized lower
valve cover cups and tops.
• Flywheels are cast iron type, assembled with stock rods and
Torrington rollers with steel cages at sprocket and
pinion shaft ends.
• Valve Train includes solid tappet assemblies with Sifton
lightning cam, Sifton solid stock pushrods and chrome pushrod
Over 500 Sold!

covers.
• Cast Iron Cylinders fitted with 8.5:1 cast pistons and
Hastings rings
• Oil Pump V-Twin Replica cast iron with early iron cover
• Distributor mechanical advance with corresponding relay
mount with distributor post guide slot
10-1989 • Intake Manifold Linkert style 4 bolt manifold with plumber
Industry style nuts and brass seals.
First!
VT No. Item Stroke Cubic Inch

10-1938 Long Block 61”
10-1983 Long Block 61” Knucklehead Factory Engine
10-1988 Long Block 4” 74” VT No. Item Cubic Inch Year
10-1986 Long Block 4¹⁄₂” 84” 10-0999 Long Block 61” 1936
10-1989* Short Block 4” 74” 10-0993 Short Block 61” 1936
10-1350 Long Block 4” 74” 10-1621 Short Block 61” 1936-47
*Note: Same as long block assembly, less heads, cylinders and 10-0873 Long Block 74” 1936
piston, distributor, manifold and top oil line. 475
V-Twin Mfg. Replica Panhead Long Block
10-1995 10-1996
10-2016
Replica Panhead 74” Engines have replica type heads with

Replica Details include stock exhaust ports and V-Twin cases. The 1948-54 style uses
• OE Number Boss a plumber intake manifold. The 1955-61 style uses O-ring
• Stock Exhaust Port intake manifold. Engines include cast iron oil pump. OE num-
• Replica Oil Pump ber boss in provided blank on left side. Actual case numbers
10-2015 are on right side. The sprocket shaft supplied is for 1936-64
style 4-speed stock transmissions. Engines listed do not
include intake manifold.
FLH Panhead Long VT No. Year Finish Distributor
Block 10-1995 1948-53 Chrome Manual
10-1994 Alloy, 74" 10-1996 1948-53 Alloy Manual
10-2003 74" 10-2015 1955-61 Chrome Automatic
10-2016 1955-61 Alloy Automatic
V-TwinTM Panhead Long Blocks
V-Twin Panhead
10-1976 10-1999 Parts Dope
Reference Guide
for 100% V-Twin
restoration compo-
nents and tips for
1948-65 Panhead
models. 272 pages.
VT No. 48-1364
V-Twin MfgTM
10-2003 1958 Panhead
FLH Panhead Long Block is of 74” or 80” cubic inch displacement featuring a crankcase, Sifton oil pump/breather assembly, stock stroke fly-
wheel, Timken bearing, stock FLH cam installed with a matched pinion and cam gear with a Torrington full compliment bearing. Assembly sup-
plied with a cast finished ribbed cam cover, chrome lifter blocks which are fitted with hydraulic tappets and stock steel pushrods. Cylinders are
stock replacement with standard compression 8.5:1 cast pistons and Hastings rings. Top end includes single plug head fitted with rocker arm
assemblies, chrome pan covers with thick D-Rings, and chrome steel pushrods covers. Order manifold (Shovel band style), carburetor and 2
brush generator separately. Automatic advance distributor is included. Entire unit is pre-run and factory tested for oil pump pressure. Also avail-
able as 1963-65 type with overhead oiler line. VT No. 10-2005 features stainless pans and D-Rings and zinc plated lifter blocks.
VT No. Replica Item Year Cam Cover
— 10-1977 74” 1958 Style w/Stock Exhaust Ports 1948-65 Finned
10-2003 10-1958 74” 1958 Style 1955-62 Finned
— 10-1976 74” 1958 Style with Alloy Finish 1955-64 Finned
10-1994 — 74” 1958 Style w/Stock Exhaust/Alloy Finish 1955-64 Finned
10-2004 — 80” 1963-64 Style Overhead Oiler 1963-64 Finned
10-2012 — 74” 1963-64 Style Overhead Oiler 1963-64 Finned
10-1998 — 74” 1965 Style Overhead Oiler 1965-69 Smooth
10-1999 — 80” 1965 Style Overhead Oiler 1965-69 Smooth
10-0999 — 61” Long Block
10-0993 — 61” Short Block
476 10-1994 Detail
88” Generator-Alternator Pan or Shovelhead Long Block
10-2014
10-2014 10-2018 10-1984

Panhead or Shovelhead 88” Generator-Alternator Long
Block features alternator left hand case and generator right hand Cubic Inch = πr2 x Stroke
case. Each long block is assembled with S&S Crankcases, Sifton r = 1/2 of Bore
CLASSIC
Oil Pump/Breather Assembly, 4¹⁄₄” stroke flywheels, Timken main
bearing, stock FLH cam with matched pinion gear installed with CUBIC INCH CHART
a Torrington full compliment needle bearing. Assembled with a
cast finish cam cover, automatic advance distributor, chrome STROKE 3¹⁄₂” 3¹³⁄₁₆ 3.968” 4¹⁄₄” 4¹⁄₂” 4⁵⁄₈” 4³⁄₄” 5.00”
lifter blocks that are fitted with hydraulic tappets and pushrods. 74” 80”
Cylinders are S&S 3⁵⁄₈” type fitted with 7.75:1 compression ratio 2³⁄₄” 45”
cast pistons and rings. Top end also features 3⁵⁄₈ Big Bore single B 3⁵⁄₁₆” 61”
3⁷⁄₁₆” 64.8” 73.7” 78.7” 83.4” 85.7” 88.0” 92.8”
plug Panheads with Shovelhead exhaust pipe flange and intake O 3¹⁄₂” 67.2” 76.3” 81.6” 86.6” 89.0” 91.4” 96.1”
ports, and are fitted with rocker arm assemblies, no lead valves,
chrome pan covers, polished thick D-Rings,chrome pushrod cov‑ R 3⁵⁄₈”
3¹¹⁄₁₆”
72.1”
74.6”
81.7”
84.7”
87.4”
90.7”
92.9”
96.1”
95.5”
98.8”
99.0”
101.5”
103.2”
106.8”
ers and chrome rocker box feed line.
Entire unit is pre-run and tested for proper oil pump pressure.
E 3¹³⁄₁₆” 79.9” 90.6” 97.0” 102.8” 103.7” 108.9” 114.2”
3⁷⁄₈” 82.3” 93.4” 100.1” 100” 108.9” 111.9” 117.8”
Order intake manifold (O-ring type) and carburetor separately. 4.00” 87.9” 99.7” 106.8” 113.0” 116.1” 119.3” 125.6”
Use with 4 speed 1970-84, 5 speed Rigid Softail 1986-99 trans‑ 4¹⁄₈” 93.4” 106.0” 113.5” 120.2” 123.5” 126.9” 133.6”
mission electric or kick start. VT No. 10-2018 has chrome cam 4¹⁄₄” 99.2” 112.6” 120.5” 127.6” 131.1” 134.7” 141.8”
cover in addition to chrome pans.
VT No. Finish Type Chrome Y Tube Top Oil Lines fit
10-2014 Natural Panhead Panhead top ends.
10-2018 Polished Panhead VT No. 40-0606
10-1984 Natural Shovelhead
10-2013
V-Twin MfgTM
10-2013 Replica Flatside
Shovel
V-Twin First
Replica Engines
1997 Evo
1998 Panhead
1999 Shovel
10-2013 2002 Knucklehead
Flatside Shovelhead Long Block is of 74 cubic inch displacement featuring Sifton oil pump/breather assembly, stock stroke
flywheel, tapered bearing assembly, stock FLH cam properly installed with a matched pinion and cam gear with a Torrington full
compliment bearing. Assembly is supplied with a natural finish Flatside 1966‑69 stock style cam cover, chrome lifter blocks which
are fitted with hydraulic tappets and stock style pushrods. Cylinders are stock style with standard compression 8.5:1 cast pistons and
Hastings rings. Top end includes replica stock type single plug heads with chrome steel pushrod covers and polished rocker boxes
with shafts and arms installed. Order manifold (flat seal type), carburetor and 2 brush generator separately. Clamp style automatic
advance distributor is included. Entire unit is pre-run and factory tested for oil pressure.
All long blocks shipped assembled as pictured to fit 1965-69 transmission.
VT No. Item
10-2002 74”
10-2013 80”
477
Long Block
V-TwinTM
Replica
Long
Block
10-2017
Shovelhead Long Block is an 80 or 88 cubic inch displacement featuring a S&S crankcase, Sifton oil pump/breather assembly
and a stock or 4⁵⁄₈” stroke flywheel, Timken bearings, a stock cam properly installed with a matched pinion and cam gear with a
Torrington bearing. Assembly is supplied with a chrome nose cover and chrome lifter blocks which are fitted with hydraulic tappets
and stock style pushrods. Cylinders are 3¹⁄₂” stock style with standard compression pistons and Hastings rings. Top end includes
stock type single plug heads with stainless valves, with shafts and arms installed. Order manifold (flat seal type), stator and ignition
system separately. Pre-run factory tested for oil pump pressure.
VT No. Size Stroke
10-2001 80” 4¹⁄₄”
10-2017 88” features 4⁵⁄₈”
Short Block
10-0006
10-2008
V-TwinTM Short Blocks are shipped fully assembled as shown.

All units feature an S&S crankcase (except where noted), Sifton
oil pump/breather assembly, stock stroke flywheel, Timken bear‑
ings, stock cam properly installed with a matched pinion and cam
gear with Torrington bearing. Assembly is supplied with a natural
cover and chrome tappet blocks are fitted with standard tappets
V-TwinTM 80”Short Blocks are shipped fully assembled as which will accept a hydraulic tappet unit or solid conversion kit
shown. All 80” units feature an S&S Crankcase, Sifton Oil not included.
Pump/Breather assembly, stock stroke flywheel, Timken VT No. Fits Cu In
Bearings, stock cam properly installed with a matched pinion 10-1952* 1948-62 Panhead 74”
and cam gear with Torrington bearing. Assembly is supplied 10-2121* 1955-62 Panhead 74”
with a chrome nose cone cover and chrome lifter blocks are fit‑ 10-2008 1956-62 Panhead 74”
ted with standard tappets. Blocks fit 1973-84 Shovelheads. 10-2009 1966-69 Shovelhead 74”
VT No. 10-0006 10-1992 1963-64 Panhead 80”
10-1991 1965 Panhead 74”
10-1990 1965 Panhead 80”
*Note: Assembled with V-Twin replica crankcases.
478
8806-17 7604-7
Top Engine Mount
31-0103 31-0100
8807-17 8807-17Z
Chrome Big Twin Top Engine Mounts replace the stock type.
Upper and Lower for 1936-69 Big Twin. 31-0103* 69018-73A 1973-80 FXE-FX
VT No. Year Finish 31-0100* 69013-77A 1977-83 FXE-FXS
8806-17 1970-84 Chrome *Note: Features choke mount.
8806-17Z As Above Zinc
8807-17 1970-84 Zinc 31-0256
8807-17T 1970-84 Zinc
8807-17Z As Above Zinc
9926-17 1970-84 Allen
CLASSIC
Upper Only
7604-7 1936-84 Acorn
31-0109
Top Mount Stud Kit includes studs, washers Chrome Heavy Duty Two Piece Top Engine Mounts are
and nuts. constructed of ¹⁄₄” thick steel.
VT No. Year Finish VT No. Year Fits
2368-8 1948-65 Parkerized 31-0109 1948-84 74 and 80
2369-8 1948-65 Cadmium 31-0256 1980-83 FLT-FXR
2368-8
2370-8 1966-84 Cadmium *Note: Fits Shovelhead or Panhead engine in Evo style frame.
37-0079 Offset Mount Sleeve
12-2107 Studs 4 pack
Maxi-Mount fits 1948-84
31-4020
FL-FX. VT No. 31-4020
Chrome Allen Screw Kit connects
engine mounts, front, top and rear to
frame on models listed below. Knurled.
Fits 1948-84 Big Twin 4-Speed.
37-9181 VT No. 37-9181
Chrome Billet Top Mount fits 1948-84 Panhead and
Shovelhead.
31-0748 31-1275
VT No. Type
31-0748 Plain
31-1275 With holes
31-0709
31-1275
31-0101 31-0110 31-0261
31-0709 Installed Big Twin Chrome Top Engine Mounts replace the stock type.
VT No. OEM Year Type 12-2107
31-0101 16853-48 1948-84 FL-FX
Chrome Billet Top Engine Mount fits 1948-99 Big Twin
31-0110* 16853-48 1948-65 FLH
motors.
31-0261* 16853-48 1948-65 FLH, Cadmium
VT No. Type
12-2107 16864-48 1948-84 Stud
31-0709 Smooth
2650-13 Bolt 1948-72 FL
31-1275 With holes
*Note: Features choke mount.
31-0105
8165-19 9627-19
Upper and Lower for 1936-69 Big Twin. Big Twin 1948-84 Chrome Top Engine Mount, mounts
VT No. Year Finish coil and is available without a hole to mount a universal key
8164-19 1936-69 Chrome switch.
8165-19 1936-69 Cadmium VT No. 31-0105
9627-19 1936-69 Parkerized
9627-19T 1936-69 Zinc
479
Crankcase Set 12-0409 10-2535 10-2533
1970-84
Shovel
Pinion/Sprocket Shaft Cage and Roller Kits include STD size
rollers, cages, washers and retaining ring for applications listed.
VT No. Side Year
12-0409 Sprocket 1941-54
10-0029 10-2535 Pinion 1936-54 10-0787A
10-0787 Pinion 1936-54
10-0787A Cages 1936-54
S&S Crankcase Sets are shipped set up with Timken left side 10-2551 Pinion 1955-57
bearing and race assembly, seal and seal spacer, oil pump 10-2533 Pinion 1958-69
drive bushing, needle bearing and pinion race for right side, 10-0787
(pressed in and line honed) ready to assemble. Also included 16-1039
are cylinder studs, nickel plated case bolts, crankcase fittings
and a timing and magnetic drain plug. Accepts wheels up to 16-0423
8½” diameter. VT No. 10-0028 Knucklehead cases fit Panhead
style frames and later model oil pumps. Note: Oil pump
required for assembly for stock bore.
VT No. Year Bore Oil Pump
10-0029 1948-64 Stock 12-8001
10-0030 1965-69 Stock 12-8001
10-0003 1970-84 Shovelhead Stock 12-8002
16-1264
16-1264
Motor Number Stamp Set for FL models.
VT No. Year
16-1039 1936-47
16-1264 1950-69
16-0423 1970-99
10-0280 Number Stamp Holder Tool holds the
S&S Alternator-Generator Crankcase Set is shipped with left letter or number stamps from the motor
side bearing race, oil pump drive bushing, cylinder base studs, 16-1147 number stamp sets. VT No. 16-1147
idler stud, circuit breaker stud, pinion needle bearing and pinion Gasoila Sealant available in hard setting
race installed. Pinion race is lined. Honed and ready for assem‑ red varnish or soft set blue/white. Red
bly. Also included are nickel plated case bolts, crankcase fit‑ Sealant is the original sealer for inside
tings, left side engine bearing, seal and spacer. Accepts wheels crank cases or cam covers for sealing pin
up to 8¹⁄₂” diameter. 41-0151 holes on porous surfaces. Blue/White seals
VT No. Cylinder Type Bore Oil Pump threaded joints on pipe threads and fittings.
10-0280 Panhead 3⁷⁄₁₆” 12-8001 Both types are insoluble in oil, gas and sol‑
10-0034 Shovelhead 3⁷⁄₁₆” 12-8001 vents. The ¹⁄₄ pint can includes brush, each.
10-0044 Shovelhead 3⁵⁄₈” 12-8001 VT No. Item
Screws 41-0151 Red Varnish
VT No. Year Type 41-0152 41-0152 Blue/White Soft Set
8726-8 Lifter Base Screws
37-8519 1955-69 Cam Cover Screws Drain Plugs
Engine Case Drain Plug/Oil Pump
Body Plug fits Big Twin case 1911-
70, oil pump body 1968-84.
VT No. Finish
8116-1 8117-1 8116-1 Chrome
8117-1 Cadmium
8135-34 8117-1T Zinc
9675-1 Parkerized
Engine Case Bolt Kit includes the necessary hardware to bolt
together the engine cases of the years listed. Available as OEM 7502-2 Chrome Oversize Plugs with Tap.
stock in chrome, cadmium or acorn in chrome. Kit includes a tap and a dome head plug.
Acorn Chrome Cadmium Fits VT No. Type Includes
8127-34 8128-34 8129-34 1936-39 OHV Big Twin 7502-2 Engine & Plug and Tap
8130-34 8131-34 8132-34 1940-47 OHV Big Twin Trans Drain
8133-34 8134-34 8135-34 1948-64 Panhead 7503-1 Engine Oversize Plug
8136-34 8137-34 8138-34 1965-68 Big Twin 7500-2 Timing Tap and Plug, Acorn
8140-34 8141-34 1970-78 Shovelhead 7501-1 Timing Acorn Plug, Oversize
8142-34 8143-34 8144-34 1979-95 Shovelhead & Evo 9407-1 Timing Tap
7503-1
480
V-Twin Replica Case Set
10-0937 10-0954
10-0938
10-0843
V-Twin “Shop Ready” Replica Case Sets and Replacement
Let Hand Cases for Big Twins feature left side number boss
CLASSIC
which is left blank. The 1948-54 case set used stock type loose
rollers on both pinion and sprocket shaft and the 1956-69 case
sets use a Timken bearing on the sprocket shaft and loose
rollers on the pinion shaft side. Both the case sets and left hand
only cases are slightly thicker than stock for added strength. 10-0955
VT No. Item Fits Welch Plug
10-0954 Case Set 1948-54 for Early
Cases, 5
10-0955* Case Set Custom pack.
10-0294 Case Set 1958-62
VT No. Size
10-0843 Left Case Only 1948-54 12-0599 ¹⁄₂” Welch Plug
12-0595 ⁹⁄₁₆” Welch Plug
10-0345 Left Case Only 1948-54 12-0596 ³⁄₈” Welch Plug
10-0937 Left Case Only 1955-64 12-0623 .619 Welch Plug
12-1166 Timing Cover Pin
10-0938 Left Case Only 1965-69
*Note: 10-0955 case set is drilled and tapped for overhead oil
line. Allows use of Shovelhead or 1963-64 Panhead top ends to
be used. Includes Timken bearing for left side. 10-0345
Timing Plugs
A B C D
E
Timing Plugs are available in stock size ⁵⁄₈ — 18 thread A
unless noted as oversize (O.S) which is ¹¹⁄₁₆ — 16
thread.
A. Acorn style plug fits all models Big Twin models tim‑
ing plug holes and oil tanks.
VT No. Type
7106-1 Chrome
B. Acorn style plug with oversize thread and one tap for rethreading stripped out
B Generator and Right Side OE Style Number
timing hole. Fits all timing holes. Relay Mounts Timing Cavity Boss Detail!
VT No. Type
Components are: • Circuit Breaker Stud • Case Bolt Set
7500-2 Plug and Tap (Oversize) 7500-2 • Cam Bushing or Bearing • Oil Pump Drive Bushing • Tappet Oil Screen
7501-1 Plug Only (Oversize) • Left Case Race or Timken • Right Case Bushing • Breather Tube
9407-1 ¹¹⁄₁₆”—16 Tap (Oversize) C 9402-1 Assembly • Cylinder Base Studs • Drain and Timing Plug
C. Stock timing plug. • Idler Gear Stud • Dowel Pins
8114-1 Chrome
8115-1 Cadmium
9404-1 Cadmium (Oversize)
9714-1 Parkerized (Oversize)
9504-1 Parkerized as above, ⁷⁄₈” Hex 8610-1
9503-1 As above cadmium D
D. Functional and custom design plug fits all Big Twin
models and Sportster timing plug holes and oil tanks.
8610-1 Chrome
8611-1 Cadmium
E. Allen style plug use on all 1970-up replaces 720.
9402-1 Chrome
E
9403-1 Cadmium
9960-1 Chrome (Oversize)
481
Flywheel
Replica 10-1045
Rod ends are
Flywheel 4340 heat matched +/- 2
with stock treated grams
rods steel rods
10-1007
Guaranteed
unbreakable
110,000 psi
ductile iron
flywheels
Rod sets
10-1078 average
1.25 kg
Flywheel Assemblies feature full weight flywheels, with
removable pinion and sprocket shafts as original, trued and
balanced for cast pistons. Units include forged and machined
H-Beam Sifton connecting rod set of certified 4340 steel
with multistage heat treatment and are fitted with Torrington
Rollers, with alloy bearing retainer cages.
10-1047
VT No. Year Stroke
10-1077 1965-69 3.968”
10-1078 1958-64 3.968”
10-1079 1955-57 3.968”
10-1089 10-1080 1954 3.968”
10-1081 1941-53 3.968”
Complete Flywheel Assembly for OHV models, is shipped com‑ 10-1097 1973-77 3.968” Stock 74”
plete, assembled and trued with shafts. Replica Flywheel Sets feature cast construction to accept OE
VT No. OEM Fits Stroke Note Brand style components.
10-1070 — 1936-40 61” 4 2 V-Twin VT No. Year Model Stroke 10-1601
10-1172 — 1941-52 61” 4 2 V-Twin 10-1601 1941-53 Big Twin, 74” 3.968
10-1007 23906-41 1941-53 74” 4 2 V-Twin 10-1126 1956-69 Big Twin, 74 3.968
10-1112 Stroker 1941-53 80” 4¹⁄₄ 2 V-Twin
10-1113 Stroker 1941-53 84” 4¹⁄₂ 2 V-Twin 10-1602* 1973-99 Big Twin, 80” 4.250
10-1033 23907-54A 1954 Only 4 2 V-Twin 10-1125 1972-78 Big Twin, 74” 3.968
10-1034 23907-55A 1955-57 4 2 V-Twin 10-1635* 1973-99 Big Twin 4.250
10-1008 23906-58 1958-64 74” 4 2 V-Twin *Note: 10-1602 features thick sprocket side
10-1090 — 1958-64 80” 4¹⁄₄ 2 V-Twin flywheel and 10-1635 has narrow side flywheel.
10-1002 — 1958-64 80” 4¹⁄₄ 2 S&S
10-1000 23906-58 1958-64 74” 4 2 S&S
10-1001 23906-65A 1965-69 74” 4 2 S&S
10-1003 — 1965-69 80” 4¹⁄₄ 2 S&S Truett & Osborn Flywheel Sets fea‑
10-1089 — 1965-69 80” 4¹⁄₄ 2 V-Twin ture original weight right and left sides
10-1082 — 1965-69 74” 4 2 V-Twin with stock stroke.
10-1048 23906-70 1970-72 74” 4 2 V-Twin
10-1096 23906-73 1973-77 74” 4 2 V-Twin
10-1045 23906-78A 1973-E83 80” 4¹⁄₄ 2,4 V-Twin
10-1091 As Above 1973-90 80” 4¹⁄₄ 3,4 Sifton VT No. Fits Type O. D.
10-1047 Special Alt-Gen 80” 4¹⁄₄ 1,3 S&S 10-1043* 1936-40 OHV 61” Stock 8 1/8”
10-1098 Special Alt-Gen 80” 4¹⁄₄ 1,2 V-Twin
Notes: 10-1105 1941-52 OHV 61” Stock 8 1/2”
1-Special 80” flywheel assembly used for alternator-generator case sets only. Feature late type 10-1005 1941-53 Big Twin 74” Stock 8 1/2”
sprocket shaft and early style pinion shaft. 10-1114 1941-53 Big Twin 80” Stroker 8 1/2”
2-Features replaceable pinion and sprocket shafts and thick sprocket side flywheel.
3-Features replaceable pinion and sprocket shafts and narrow sprocket side flywheel. 10-1115 1941-53 Big Twin 84” Stroker 8 1/2”
4-Require use of 1987-up type pinion shaft bearing and retaining ring. 10-1006 1956-69 Big Twin 74” Stock 8 1/2”
10-1124 1956-69 Big Twin 80” Stroker 8 1/2”
Flywheel Thrust Washer Set used on 10-1025 1972-80 80” with 8° taper Stock 8 1/2”
10-1026 L1981-85 80” with 6° taper Stock 8 1/2”
1929-54, 61, 74 and 80 Twins, our set con‑
10-1029 1970-71 Big Twin74” Stock 8 1/2”
tains 2 more washers than the original set, one thinner and one 10-1028 1973-78 Big Twin74” Stock 8 1/2”
thicker than stock. The 11-piece set contains one each of the fol‑ *Note: Accepts later tapered pin 1941-80 type.
lowing widths; .060, .066, .070, .074, .078, .082, .086, .090, .094,
.098, and .102.
VT No. 10-1153 (Complete Set .060-.102 11 piece)
VT No. Size VT No. Size
10-1300 .060 10-1304 .078
10-1301 .066 10-1306 .086
10-1303 .074
482
10-1380 Panhead
CLASSIC
10-1336
10-1380
10-1336
10-1336
Bastardo Panhead Motor features a V-Twin Mfg. Replica crankcase

with Timken bearings a the sprocket shaft, Sifton oil pump/breather
assembly, Sifton stock stroke flywheel, stock FLH cam installed with
a matched pinion and cam gear with a Torrington full compliment
bearing. Assembly supplied with a cast finish cam cover, chrome lifter
blocks which are fitted with hydraulic tappets and stock steel pushrods.
Cylinders standard compression 8.5:1 cast pistons and Hastings rings.
Top end includes heads fitted with rocker arm assemblies, chrome pan
covers with thick D-Rings, and chrome steel pushrods covers. Order
manifold (Shovel band style), carburetor and 2 brush generator sepa‑
rately. Automatic advance distributor is included. Entire unit is pre-run
Flywheel Assembly with 4⁵⁄₈” stroker is and factory tested for oil pump pressure.
10-0038
for 1973-84 Big Twins. These flywheels VT No. Stroke Bore Cubic Inch
are machined from heat treated steel 10-1335 4” 3⁷⁄₁₆” 74”
10-1336 4” 3¹⁄₂” 76”
forgings which makes them structurally
10-1425 4¹⁄₄” 3¹⁄₂” 82”
superior to cast iron designs. Flywheels 10-1426 4” 3⁵⁄₈” 82”
are assembled with heavy duty rod set, 10-1427 4¹⁄₄” 3⁵⁄₈” 88”
trued and balanced for pistons listed. 10-1380 4” 3¹⁄₂” 76”
Piston sets must be ordered separately. Note: Updated Panheads are fitted with Shovelhead intake and exhaust
valves, exhaust ports are Shovelhead style to accept single bolt Shovelhead
VT No. 10-0038
flanged headers. Redesigned intake ports accept a Shovelhead O-ring
S&S 2900 Series Forged Stroker intake manifold. These Bastardo Panhead motors breathe and run like a
Piston Sets machined to fit both 4³⁄₄” Shovelhead! Stroke bore and cubic inches as noted in text.
and 4⁵⁄₈” stroker flywheels. Includes
rings, wrist pins and retainers. When Shafts
Special 6° Taper Sprocket Shafts.
used with 4³⁄₄” stroke compression will
be 8.25:1 with 4³⁄₄” stroke compression VT No. Years Flywheel Type Brand
VT No. Bore Size 10-0455 1970-up SE or SL S&S
11-0455 3⁷⁄₁₆ Standard will be 9:1 Note: Remember that an 80” 10-1189 1970-up SE or SL MS
3¹⁄₂” standard bore equals 3⁷⁄₁₆” + .060 Note: S&S includes nut and key and Motorshop is
bore size. 10-1189
without nut and key
483
Rod Assembly
10-0173 10-0173 10-0174 SiftonTM Big Twin Rod Assembly
features forged and machined H-Beam
design of certified 4340 steel with multi
staged heat treatment and are fitted
with Torrington rollers with extrud‑
ed alloy cages and a SiftonTM pin
and matching nuts. Unfinished type
requires honing of upper and lower
bushings. Rods are 7.440” center to
center and will accommodate up to 5”
stroke.
VT No. Year Item
10-0271 1941-81 Complete
Assembly
10-0272 1981-99 Assembly
V-Twin™ Replica Stock Replacement Rod Sets include
10-0274 Unfinished Rods Only
new rods, crank pin, nuts, cages and standard rollers fitted
10-0271
and assembled. Piston pin bushings are installed and honed
for stock wrist pin. *Note: Includes step-crank pin. Wrist Pin Bushings for 1936-99 Big
VT No. OEM Years/Model Twin are available in bronze replica
10-0186* 24277-37 1936-52 61” Pan-Knuckle type or Sifton Ampco 45. Replica type
10-0173 24281-41A 1941-73 74” Pan-Shovel sold in pairs. Sifton type sold each.
10-0174 24281-74 1974-E81 74” & 80” Shovel
10-0175 24281-80 1981-83 80” Shovelhead Size VT No. Type
Standard 10-0756 Replica
S&S Rods are heavy duty replacement Standard 10-0765 Sifton
rod sets included wrist pin bushings, .002 10-0757 Replica
rod races, matched rods, pins, rollers/ .005 10-0758 Replica
cages and nuts, for stock or stroker .010 10-0759 Replica
use. Fit 1941-81 74” and 80”. *Note:
Have 18 bearing steel cages others 17
roller alloy cases. VT No. 10-0260*
Roller Bearings
Big Twin Connecting Rod Roller Sets. Bulk Pack Rod Rollers
1941-72 Big Twin
Each set supplies enough rollers for that application only. Size Long OEM Short OEM
Alloy Steel Standard — 9171A — 9101A
Cage Cage .0002 — 9172A — 9102A
Size 1973-86 1941-72 .0004 — 9173A 12-4539 9103A
.0006 12-4532 9174A 12-4540 9104A
Standard 10-0144 10-0152 .0008 12-4533 9175A — 9105A
.0002o/s 10-0145 10-0153 .001 — 9176A — 9106A
.0004o/s 10-0146 10-0154 .002 — —
.003 — 12-4544
.0006o/s 10-0147 10-0155
1973-86 Big Twin
.0008o/s 10-0148 10-0156 Size Long OEM
.003o/s — 10-0159 .003 12-4552
Size Short OEM
.0002 12-4554 9442A
Big Twin Right Pinion
12-0400 12-0404 12-0401 24721-30 1936-48 Big Twin 2 pc
12-0400 24646-36 1936-54 Big Twin 2 pc
12-0413 24646-36 As Above, Sifton 2 pc
12-0429 Motorshop 2 pc
12-0402 Rowe 2 pc
Big Twin Left Side Sprocket
12-0401 24721-30 1930-54 Big Twin 2 pc
Steel Roller Retainer Cages. 12-0414 24721-30 As Above, Sifton 2 pc
VT No. Application U/M 45” Left Sprocket
Rod 12-0424 24720-29 1929-73
12-0404 74 & 80 4 pc
12-0412 As Above, Jims 4 pc
49-0058 45 SV, OE 4 pc
12-4616 45 Roller Set 24 pc
484
Crank Pin
10-1450 10-0135 10-0129 10-8357

Model Years OEM Jims Jims Eastern Eastern V-Twin
Big Twin 3 Hole 1 Hole 3-Hole Super 2-Hole
OHV OHV
61” OHV 1940-52 23962-40 — 10-8363 10-0131 — 10-1450
Step (Step Pin) .010 O.S.
3-Hole
74” & 80” 1941-Early81 23961-41 10-8356 — 10-0129 10-0134 10-0135
74” & 80” 1941-Early81 .025 Shorter 10-0352 — — — —
80” Late1981-99 23961-80A 10-8357 — 10-0130 — 10-1211
80” Late1981-99 .001 Oversize 10-0353 — — — —
80” 1981-84 .002 Oversize 10-8358 — — — —
80” Late1981-99 180° Oiling 10-0354 — — — —
CLASSIC
180° oiling
Crank Pins are made of 8620 steel with .062 heat treated penetration. Also available are Eastern Super Type
.120 heat treatment.
Crank Pin Lock Kits include two nuts, 12-0535 12-0573 12-0521 12-0558
2 locks and mount screws. Nuts and
locks are also available separately.
VT No. Year Model
10-0335 1936-52 61” and 80” Crank Pin Nut Sets.
10-0181 10-0336 1941-53 74” Big Twin Eastern Jims OEM Year Model
10-0181 1954-Early81 Big Twin 12-0535 12-0602 23966-36 1936-52 61” and 80”
Connecting Rod Race Set fits 1936- 12-0573 — 23967-41 1941-53 74” Big Twin
99 Big Twin. Made from 52100 steel 12-0521 12-0603 23966-54A 1954-Early 81 61” and 80”
and hardened. 12-0558 — 23969-80 1981-83 61” and 80”
VT No. Brand Size Crank Pin Keys are sold in packs of 10.
10-0138 Replica STD Replaces 23985-18, 1941-80 Big Twin.
10-0828 10-0828 Replica .001 O/S VT No. 12-0201
10-0826 Replica .002 O/S
10-0830 Replica .005 O/S
10-0829 Replica .010 O/S
Sifton Crank Pin Kit includes
10-0823 Replica .002 O/S
crank pin, rod races, standard
10-0809 Jims STD
rod rollers and retainers.
Crank Pin Flywheel Washers VT No. Years Hole Type
10-2562 1941-80 2 Hole
10-2571 1981-99 2 Hole
10-2571
Sifton Steel Rod Cage Set includes

10-2522 four cages, 24366-51 and standard
Torrington Roller Set for 1936-up Big
Twin. Replaces 42385-40.
Crank Pin Flywheel Washers sold in pairs.
VT No. OEM Brand
Inside OEM Type Fits Size
10-2522 Kit Sifton
10-1150 6506 Bronze 1971-99 Big Twin Standard
12-0404 Cage Set V-Twin
10-1149 6506B Bronze 1971-99 Big Twin .005
12-0412 Cage Set Jims
10-1284 23972-36 Steel 1936-52 Big Twin 61” OHO Standard
10-1217 77972-21 Steel 1936-52 Big Twin 61” OHO .005
10-1286 23973-41 Steel 1941-69 Big Twin OHO .055
10-1163 — Steel 1941-69 Big Twin OHO .060
10-1215 23973-41A Bronze 1941-69 Big Twin .055 10-0141 10-2566
10-1216 23973-41B Bronze 1941-69 Big Twin .060
Rod Bearing Sets With Set of Three Cages fitted with stan‑
Outside
dard size Torrington rollers for connecting rods. The cage
10-1153 24100-17 1936-up Big Twin, All
material is noted. Fits 1936-86 74” and 80”.
17-0914 Crank Pin Nut Lock Plate. VT No. OEM Cage
VT No. OEM Years Model 10-0141 24385-40B Alloy
17-0914 23971-41 1941-53 Big Twin 12-2556 S&S Steel
17-0927 23971-54 1954-E80 Big Twin 10-2566 Cage Set Alloy
37-4050 1182 Screws
2901-4 369-36 1936-40 EL, Lock Tab
485
Sprocket Shaft
12-0310 12-0309 10-0413 10-0410
Big Twin Sprocket Shafts fit as listed, machined and hardened

to factory specifications.
Model Year OEM Jims Eastern Replica
61 & 74 1930-54 24001-30 10-8314 10-0410 10-0469
74 1955 24001-55 — 10-0411 —
12-0427 12-0428 74 1956-64 24001-56 10-8362 10-0412 10-0398
74 1965-69 24001-65 10-8315 10-0413 10-0476
74 1970-71 24001-70 10-8322 10-0414 —
74 & 80 1972-E81 24001-72 10-8316 10-0415 10-0876
80 L1981-86 23909-80 10-8318 10-0416 10-0440
Special to install pre1981 80” Flywheels in 1956-64 BT 10-0418
Special to install pre1981 80” Flywheels in 1965-69 BT 10-0419
Left Crankcase Bearing. Factory assembled with correct Special to install 1981-85 80” Flywheels in 1956-64 BT 10-0435
spacer for proper end play.
Timken VT No OEM Fits Model V-Twin is an Original “Jims” Distributor since 1977!
Special Sprocket Shaft Spacers for V-Twin, S&S and STD
12-0310 12-0427 9029 1955-68 Big Twin
generator style engine case sets and V-Twin left side only
12-0309 12-0428 9028 1969-up Big Twin
engine cases that require late style Timken main
Sprocket Shaft Key. Sold in 10 pack. bearing and seal. Fits between sprocket bearing
VT No. OEM Fits and sprocket.
12-0200 23985-12 1930-55 Big Twin VT No. Type Years Length
12-0203 23985-56 1956-80 Big Twin 10-8286 V-Twin & S&S 1955-64 .473
10-8269* .335 Long 1955-64 .335
Nut, Sprocket Shaft Taper End.
10-0427 V-Twin & S&S 1965-69 .671
10-8270* STD 1965-69 .666
12-0532 12-0612 24023-36 1936-71 Big Twin
14-0108 All Seal only 5 pack
(5 pack) (Each)
12-0534 12-0610 24017-80 1972-85 Big Twin Pair Engine Shaft Spacer features built in seal flange
to give added support for alternator rotor.
Lock Plate, Sprocket Shaft. Sold in 10 pack. VT No. 10-0948
VT No. Fits
17-0913 1936-71 Sprocket Shaft Spacers fit
17-0917 1972-81 Big Twins left side thru seal.
10-1160
A B C
VT No. # OEM Year Length U/M

7411-2 14-0965 7410-1 C 24031-55 1955-69 Seal Each
Big Twin Left Side Engine Case Seals. 14-0108 C 12026B 1970-99 Seal 5 pack
VT No. # OEM Year Model 10-1160 A 24029-55 1955-64 .336
7411-2 A 24776-40 1936-54 61-74-80 14-0177
10-2509 A 24029-65 1965 .621
14-0965 24031-55 1955-68 OE type 10-2513 A 24032-66 1966-69 .516
7410-1 C 24031-55 1955-68 Colony Set A 24033-66 1966-69 .546
7410-1-OS Oversize 1955-68 Colony (+.002) of A 24034-66 1966-69 .576
7410-1-US Undersize 1955-68 Colony (-.002) 6 A 24035-66 1966 69 .606
14-0177 Seal only For above A 24036-66 1966-69 .636
14-0185 B 24031-69 1969 only Big Twin A 24037-66 1966-69 .666
Left Sprocket Shaft Bearing
14-0108 B 12026B 1970-99 Big Twin and Hardware Kit for 1941-54
Note: VT No. 7410-1, area screw-in insert with integral seal. VT Big Twin includes loose rollers,
No. 14-0965 is stock type screw-in without seal. VT No. 7411-2, cages and end slinger.
8211-2 both include seal, spacer and snap ring. VT No. 12-0409
1970-94 Sprocket Shaft Left Bearing End Oil Slinger replaces 24776-40.
Spacer and Seal Kit. Fits 1940-54 Big Twin.
VT No. 10-8284 VT No. 10-0429
Engine Sprocket Nut Kit for Big Twin includes
correct nut, key retaining ring and left bearing oil
slinger.
VT No. Item Year
12-0620 Kit 1930-54
10-0949 Kit 1940-52
486
12-0503 Nut only
Pinion Shaft
Nut Pinion Shaft Gear End, each. 10-0441 10-0422
12-0507 12-0613 24023-54 1954-89 Big Twin
10-0875 10-0439
Pinion Shaft Screws, left-hand, 1951-53
Big Twin. Replaces 24020-51, 5 pack.
VT No. 10-0518 Big Twin Pinion Shafts.
Model Year OEM Jims Eastern Replica
Lock Plate, Pinion Shaft Nut, 10 pack. 61 & 74 1939-53 24006-39 10-8323 10-0400 10-0441
VT No. OEM Fits 61 & 74 1954-57 24006-54A 10-8324 10-0401 10-0422
17-0913 24015-36 1936-80 Big Twin 74 1958-72 24006-58 10-8325 10-0402 10-0488
74 & 80 1973-80 24006-73 10-8326 10-0403 10-0875
17-0929 24016-29 1929-73 45” 80 1981-82 24006-80 10-8328* 10-0408 —
12-0209 11218 Taper 1981-92 80 1983-86 24006-83 10-8328 10-0409 10-0439
Pinion Keys available in ten packs. *
Requires use of late ³⁄₄ x 20 nut 24016-80
VT No. OEM Type Fits
12-0202 23985-54 Gear 1954-75
Pinion Shaft Nut, Taper End.
12-0205 26348-15 Gear 1975-86
CLASSIC
12-0200 23985-12 Taper 1941-81
5 pack Each
12-0209 11218 Taper 1981-92
12-0532 12-0612 24023-36 1936-E81 Big Twin
10-2535 10-2533 12-0517 12-0609 24016-80 L1981-83 Big Twin
10-0214 10-0278 10-0279 10-0293
10-0787 10-0208 10-0204 10-0245 10-0226 10-0951

Pinion Bearing Sets for right side includes rollers and cages. Washers Case Race machined and ground to factory specifications.
and snap rings included.
VT No. Year
Replica brand is manufactured by Sifton.
10-2535 1936-54 Sprocket Left Side Case Race for OHV and 1940-48 Big Twin
10-1254 1936-54 Side Valve.
10-0787 1936-54 Jims Eastern OEM Size Year/Model
10-2551 1955-57 10-0235 10-0208 24621-40 Standard 1940-54 Big Twin
10-2533 1958-86 10-0307 — 10-0279 Replica Standard 1940-54 Big Twin
Case Rollers. — 10-0209 — .005 1940-54 Big Twin
1940-E54 Big Twin, Big Twin Right Side replaces 9261, 12 per set.
Size 12-Piece 100 Pack OEM — 10-0210 — .010 1940-54 Big Twin
Standard 10-0307 9261 — 10-0211 — .015 1940-54 Big Twin
.0002 10-0308 — 9262 All Rollers by — 10-0951 — .040 1940-54 Big Twin
.0004 10-0309 9263
.0006 10-0310 12-4526 9264 TORRINGTON® Pinion Right Side Case Race
1955-57 Big Twin Right Side Case Roller Sets, 13 per set. 10-0240 10-0204 24599-40 Standard 1940-54 Big Twin
Size 13-Piece 100 Pack OEM — 10-0293 Replica Standard 1940-54 Big Twin
Standard 10-0326 — 9421
.0002 10-0327 12-4518 9422 10-0241 10-0205 — .005 1940-54 Big Twin
.0004 10-0328 12-4519 9423 — 10-0206 — .010 1940-54 Big Twin
.0006 10-0329 — 9424
.0008 10-0330 — 9425 — 10-0207 — .015 1940-54 Big Twin
.001 10-0331 — 9426 10-0243 10-0212 24599-55 Standard 1955-57 Big Twin
1958-86 Big Twin Right Side Case Rollers, 28 pc. 10-0319 10-0244 10-0213 — .005 1955-57 Big Twin
Size 28-Piece 100 Pack OEM
Standard 10-0319 — 9220 1958-92
.0003 10-0339 — 9218 10-0245 10-0214 24599-58A Standard 1958-92 Big Twin
.0002 10-0320 — 9221 — 10-0278 Replica Standard 1958-92 Big Twin
.0004 10-0321 — 9222
.0006 10-0322 — 9223 10-0246 10-0215 — .002 1958-92 Big Twin
.0008 10-0323 — 9224 — 10-0216 — .005 1958-92 Big Twin
.001 10-0324 — 9225 10-0248 10-0217 — .010 1958-92 Big Twin
.002 10-0325 —
Late 1954 Big Twin Right Crankcase Rollers, 12 pc. — 10-0230 — .015 1958-92 Big Twin
Size 12-Piece 100 Pack OEM 1936 OHV Case Races. Note: VT No. 10-2498
Standard — — 9241 — 10-0226* 413-36 1936-39 Right Standard
.0002 12-4602 — 9242
.0004 12-4575 12-4595 9243 — 10-0228* 416-36 1936-39 Left Standard
.0006 12-4574 12-4594 9244 — 10-2521* — 1936-39 Left .002
.001 12-4604 12-4605 9246 *Note: Fits 1937-39 Big Twins, 1936 Overhead Valve.
1940-54 Big Twin Left Side Case Rollers, 24 per set.
Standard 10-0300 — 9220
.0002 10-0301 — 9221
.0004 10-0302 12-4512 9222
.0006 10-0303 — 9223
.0008 10-0304 12-4514 9224 487
.001 10-0305 — 9225
Big Twin Internal Spacer
1940-57
1958-99
12-0310 12-0427
12-0946
Spacers for 1940-57 Big Twin models.

VT No. OEM Description
12-0310 9029 1955-68 Left Crankcase Bearing, each Spacers for 1958-99 Big Twin Models.
10-1160 24029-55 1955-64 Sprocket Shaft Spacer .336, 5 pack VT No. OEM Description
14-0965 24031-55 1955-57 OEM type Insert 12-0310 9029 (A) 1955-68 Left Crankcase Bearing
7410-1 24031-55 1955-57 Sprocket Shaft Seal and Nut, each 12-0427 9029 (A) 1955-68 Left Crankcase Bearing, VT
14-0177 — Seal Only for Above, each 12-0309 9028 (A) 1969-up Left Crankcase Bearing
12-0400 24646-36 1937-53 Right Roller Bearing Retainer, pair 12-0947 11160 (B) 1985-up Left Bearing Retainer Ring
10-1155 24690-40 1940-50 Right Bearing Washer, 5 pack 12-0904 11007 (C) 1958-86 Right Bearing Retainer Ring
10-1154 24692-54 1954-57 Right Bearing Washer, 5 pack 12-0946 11177 (C) 1987-92 Right Bearing Retainer Ring
10-1156 24695-40 1940-54 Right Bearing Spacer, 5 pack 12-0967 11177A (C) 1993-99 Right Bearing Retainer Ring
12-0913 24701-54 1954-57 Right Bearing Retainer Ring, 10 pack 14-0965* 24031-55 (D) 1958-68 Crankcase Seal OEM type
12-0914 24702-40 1940-54 Crankcase Bearing Ring, 10 pack 7410-1* 24031-55 (D) 1958-68 Crankcase Seal
12-0403 24718-54 1954-57 Right Roller Bearing Retainer, each 14-0185 24031-69 (D) 1969 Crankcase Seal
12-0401 24721-30 1930-54 Left Roller Bearing Retainer, pair 12-0712 23741-55 (E) 1955-84 Crankcase Bearing Shim .003
10-0429 24776-40 1940-54 Left Bearing End, each 10-0427 240003-70 (F) Sprocket Shaft Spacer
10-1158 24779-40 1940-54 Left Bearing Washer, 5 pack 10-1160 24029-55 (G) 1955-64 Sprocket Shaft Spacer .336
12-0935 24779-55 1955-69 Left Bearing Retainer Ring, each 1966-68
10-1159 24781-36 1937-57 Left Bearing Spacer, 5 pack 10-2509 24029-65 (G) 1965-only Sprocket Shaft Spacer .621
10-2513 (I) Includes the one each of the following
Set 1966-69 Sprocket Shaft Spacers:
of 24032-66 Size .516, 24033-66 Size .546,
12-0413 12-0400
Six 24034-66 Size .576, 24035-66 Size .606,
24036-66 Size .636, 24037-66 Size .666
12-0250 24608-54 (J) Screw right case bushing
Steel Roller Retainer Cages. 10-2533 24650-58 (K) 1958-86 Right bearing assembly,
VT No. OEM Year Brand standard
Big Twin Right Pinion 10-1157 24692-58 (L) 1958-86 Right bearing washer
12-0400 24646-36 1936-54 Big Twin V-Twin 12-0935 24779-55 (M) 1955-69 Left bearing retainer ring
12-0413 24646-36 1936-54 Big Twin Sifton 12-0402 43578-35 (N) 1958-66 Right bearing retainer
12-0402 43578-35 1958-up Big Twin Sifton *Note: 7410-1, 7410-55 are a screw-in inserts with integral seals.
Big Twin Left Side Sprocket VT No. 14-0965 is original screw-in type without seal.
12-0401 24721-30 1930-54 Big Twin V-Twin
12-0414 24721-30 1930-54 Big Twin Sifton
488
Big Twin Pinion Hardware
1970-83
1936-69
VT No. OEM # Year/Item
12-1175 271 1 1936-up Bushing Pin
12-1166 377 2 1941-69 Pin 1970-83 Big Twin Pinion Hardware
12-0915 25810-15 3 1937-57 Idler and Circuit Breaker Shaft Retaining Ring VT No. OEM # Year/Item
8149-12 Chrome 10 1936-69 Screw, set 12-1184 275 1 1970-up Bushing Pin
8150-12 Cadmium 10 1936-69 Screw, set 12-1153 358 2 1970-up Dowel Pin
10-0714 25597-36 26 1936-57 Cam Bushing 8761-7 Kit 4 1970-92 Chrome Allen Screw Set
CLASSIC
10-2527 As Above 26 .005 Oversize 9305-7 Kit 4 1970-92 Stock Chrome Screws
12-0316 9058 26 1958-up Needle Bearing 9306-7 Kit 4 1970-92 Stock Cadmium Screws
12-0202 23985-54 29 1954-up Key 9633-50 6099 14 1970-up Washer, Chrome
12-1379 24010-54 30 1954-77 Pinion Gear 12-0316 9058 18 1970-up Needle Bearing
12-1399 24010-39 30 1939-53 Pinion Gear 37-8971 10046 19 1981-up Wire Clamp
12-0507 24023-54 31 1954-89 Nut 12-0901 11002 20 1970-up Oil Pump Retainer Ring
10-0703 24641-36 41 1936-up Bushing 12-0202 23985-54 23 1970-up Key, Gear Shaft
12-1525 24692-40 42 1940-53 Seal Ring 12-1379 24010-54 24 1970-77 Pinion Gear
13-0105 24699-37 44 1937-69 Spring Note: 24040-78 24 Late1977-up Pinion Gear
12-1521 24703-54 45 1954-69 Spacer See Chart for Pinion Gear Listing
12-1520 24703-40 45 1940-53 Spacer
10-0065 25216-36 73 1936-47 Gear Cover 1936-53 1954-77 Size/ 1977-89
10-0066 25216-48 73 1948-53 Gear Cover Size/
OHV BT OHV BT Color OHV
10-0068 25216-58 73 1954-62 Gear Cover Color
10-0077 25216-65 73 1963-65 Gear Cover 24010-39 24010-54 OEM Big Twin
8771-2 25218-63 74 1963-65 Chrome Bolt with 16 12-1399* — Standard —
8772-2 25218-63 74 1963-65 Cadmium Bolt with 16 — 12-1379* Standard —
15-0122 25225-36C 75 1941-69 Gasket
12-1517 25275-36 76 1936-69 Breather Screen — 12-1268 Orange 12-9938 Orange
12-1518 25279-36 77 1936-69 Separator — — Black 12-9943 White
12-9967 25300-36 78 1936-47 Breather Valve Standard, S&S — — Red 12-9945 Yellow
12-9968 — As Above .030 Oversize
12-9907* 25300-36 78 1941-77 Breather Valve Standard, S&S — — Blue 12-9940 Red
12-9956* — As Above .030 Oversize — — Green 12-9941 Blue
12-9909 S&S 80 Washers for above, set 12-1265 12-1273 White 12-9942 Green
12-1536 25300-36 78 1941-77 Breather Valve Std, includes 8 pc washer set
12-1509 25313-50 80 1950-78 .115, 4 pack, one of each — — Brown 12-9939 Black
25314-50 .120 Breather — 12-1275 Yellow —
25315-50 .125 Washer
25316-52 .110 Set 12-0507 24023-54 25 1970-89 Pinion Gear Nut
17-0908 25550-57 83 1958-up Lock Washer 12-0613 24023-54 25 1970-89 Pinion Gear Nut, Jims
10-1254 25550-84 84 1984-up .045 Thick 10-0703 24641-36 28 1970-up Oil Pump Shaft Bush
12-1508 — 84 1936-up Cam Gear 12-1539 24703-54B 29 1970-89 Pinion Gear Spacer
Washer Set .050-.095 12-9922 24704-90 29 1990-up Pinion Gear Spacer
12-1440 25550-36 84 .050 Cam Gear Washer 15-0871 25225-70B 33 1970-92 Gasket and Seal Kit
12-1441 25551-36 84 .055 Cam Gear Washer 12-9907* 25300-36 38 1941-77 Breather Valve, S&S
12-1425 25552-36 84 .060 Cam Gear Washer
12-1426 25553-36 84 .065 Cam Gear Washer 12-9956* — 38 1941-77 Breather Valve, S&S, .030 Oversize
12-1427 25554-36 84 .070 Cam Gear Washer 12-9906 25313-77 38 1978-85 Breather Valve, S&S
12-1428 25555-36 84 .075 Cam Gear Washer 12-9957 — 38 1978-85 Breather Valve, S&S, .030 Oversize
12-1429 — 84 .080 Cam Gear Washer 12-9909 S&S 37 Washers for Above (Set)
12-1430 — 84 .085 Cam Gear Washer 12-1536 25300-36 38 1941-77 Breather Gear, Sifton Steel includes
12-1431 — 84 .090 Cam Gear Washer 8-piece thrustwasher set
12-1432 — 84 .095 Cam Gear Washer 12-1537 25313-77 38 1978-99 Breather Gear, Sifton Steel
12-1433 — 84 .100 Cam Gear Washer 12-1531 25310-82 38 1982-90 1992-up Breather Valve(Plastic)
10-0704 25581-36 85 1941-69 Bushing, Standard 12-1509 25313-50 39 1950-78 .110-.125 4 Piece Set
10-2524 As Above 85 .005 Oversize 12-1510 –– 39 1979-82 .110-.145 Set, 8 pack
10-0706 25582-36 86 1936-53 Cam Cover Bush Standard 12-1530 Nylon 39 1982-up .130-.165 Set, 8 pack
10-2526 As Above 86 1936-53 .005 Oversize 12-1508 25550-36 43 1970-up Cam Gear
10-0707 25582-54 86 1954-72 Bushing, Standard Washer Set .050-.095 (10 pieces)
10-2529 As Above 86 .005 Oversize 10-1254 25550-84 43 1984-up .045 Thick, 5 pack
12-1388 25775-36 87 1936-69 Idler Gear, S&S 12-1440 –– 43 .050 Cam Gear Washer
12-1397 25775-36 87 1936-69 Idler Gear 12-1441 –– 43 .055 Cam Gear Washer
12-1393 As Above 87 with Holes 12-1425 — 43 .060 Cam Gear Washer
10-0716 25785-30A 88 1936-69 Idler Bushing 12-1426 — 43 .065 Cam Gear Washer
10-0801 25791-36 89 1936-69 Idler Stud 12-1427 — 43 .070 Cam Gear Washer
12-0198 25794-36 90 1936-69 Screw 12-1428 — 43 .075 Cam Gear Washer
10-0807 25800-36 91 1936-69 Spacer 12-1429 — 43 .080 Cam Gear Washer
10-0808 25800-36B 91 936-69 Spacer, .750 Outside Diameter 12-1430 — 43 .085 Cam Gear Washer
12-0915 25810-15 Retainer Ring
12-1396 25850-36A 92 1936-69 Circuit Breaker Drive Gear 12-1431 — 43 .090 Cam Gear Washer
12-1479 25850-36 92 1936-47 Circuit Breaker Drive Gear 12-1432 — 43 .095 Cam Gear Washer
12-1389 25850-36A 92 1936-69 Circuit Breaker Drive Gear, S&S 12-1433 — 43 .100 Cam Gear Washer
10-0802 25856-36 93 1936-69 Circuit Breaker Drive Gear Stud 17-0908 25550-57 44 1958-up Lock Washer, 5 pack
10-0874 25856-36 1936-69 Circuit Breaker Drive Gear Stud, Replica 10-0705 25581-70 46 1970-up Bushing
12-0199 25859-36 94 1936-58 Circuit Breaker Stud Screw Right Hand 10-2525 25581-70 46 1970-up Bushing, .005 Oversize
12-0196 1430 94 1959-69 Screw, Left Hand, 5 pack 10-0707 25582-54 47 1954-72 Bushing, Standard, each
12-0184 1430 94 1959-69 Screw, Left Hand, each 10-0708 25582-73 47 1973-92 Bushing Standard
12-1449 26345-39 95 1939-72 Drive Gear, 25T 10-2529 As Above 47 1973-92 Bushing .005 Oversize
12-0803 26346-36 96 1936-67 Gear Shaft 12-1407 26345-73 50 1973-up Drive Gear, 24T
12-0804 26346-68 96 1968-69 Gear Shaft 12-0805 26346-70 52 1970-up Gear Shaft
12-0205 26348-15 97 1936-up Oil Pump Key 12-0205 26348-15 53 1936-up Oil Pump Key, 10 pack
12-0916 26348-36 98 1936-69 Retaining Ring 12-1450 26349-54 54 1954-72 Drive Gear
12-1395 26349-39 99 1939-53 Drive Gear 12-1408 26349-73 54 1973-83 Drive Gear
12-1496 26349-39 99 1939-53 Drive Gear *Note: Must be used with 12-9909 washer set.
12-1450 26349-54 99 1954-72 Drive Gear
Note: Must be used with 1954-77 Pinion and Cam Gears.
489
Big Twin Oil Pump Assembly
12-9969 12-9801 Replica Oil Pump
Complete Cast Iron Oil
Pump Assembly for 1950-64
Big Twin, replaces 26201-
48D.
12-0295 VT No. Item
12-9931 Assembly
Washers 12-9931 12-0295 Rebuild
Sifton Oil Pump Assembly features improved oil pump pres‑
TM 12-1947
12-0109
sure regulation that will ensure correct oiling to all areas of Big
Twin engines. This pump kit includes all necessary fittings, snap
rings, keys, gaskets and mounting bolts. Can be used on either
chain drive or belt drive models. Note: On 1970-80 models a
drilling operation is required, use VT No. 16-0986 drill fixture.
12-1947
Available with breather gear kit. Oil pump kits with breather
include drive gear, breather gear and washers, uses S&S style Replica Style Big Twin Oil Pump for 1941-49 V-Twin includes cast
outer cover without rotator.
gaskets.
VT No. Item
Pump Pump Year Finish 12-1947 Complete
With Breather 12-9750 Cover Only
12-9969 12-9800 1936-53 Polish 12-0109 Cover Only, Parkerized, Cast Iron
12-9970 12-9801 1936-53 Chrome 40-0509 Fitting
12-9969 12-9806 1954-72 Polish 40-0297 Fitting
12-9970 12-9807 1954-72 Chrome 12-0271 Rebuild
12-9971 12-9802 1973-91 Polish 12-9905 Cover
40-0561
12-9972 12-9803 1973-91 Chrome Oil Pump Fitting Kit fits 1968-84 Big Twin
S&S Complete Oil Pump Assemblies with billet bodies. models.
Include all internal gears and shafts for years listed. Also avail‑ VT No. 40-0561
able as complete kits that include drive shaft gear, pinion shaft
Chain Oil Adjuster Screws sold each.
gear and breather gear kit. 12-8002 VT No. OEM Fits Head
Oil Pump Assembly
12-1404 26383-32 1941-53 FL-FX Hex
VT No. Years
12-1476 26383-32 1936-48 Big Twin Slot 12-1404
12-8001 1936-72
12-0584 63610-53A 1954-64 Big Twin Slot
12-8002 1973-91
Oil Pump Kits with Breather
Assembly
12-8008 1973-91 12-1482
Note: S&S Oil Pumps are machined for two basic groups 1936-72 and 1973-91.
Installations on engines from 1936-1969 and 1981-91 are strictly bolt on and
require no modifications. Engines from 1970-80 require a simple drilling step and
engines from 1970-72 require a plugging step. Both steps can be performed while
the engine is still in the chassis. All 1973-76 applications require 1977-up diameter
pinion and cam gears. 12-1545 12-1476
12-0477
Warranty: All Oil Pumps are covered under our “exchange only” provision. No credit will be
issued as these items are exchange only 1936-40 Overhead Valve Knucklehead Oil Pump Parts. Hardware
kit includes by-pass kit, adjusting screw kit and gaskets.
Pro Just Adjustable Pressure Relief Cap allows VT No. Item 12-1545 Oil Pump Cover, Cad
the precise adjustment of oil pressure by turning the 12-1480 Hardware Kit 12-0452 Body
adjusting screw clockwise to increase oil pressure 12-0477 Pump Assembly 12-0296 Rebuild Kit
or counterclockwise to reduce oil pressure. Comes 12-1482 Oil Pump Cover, 282-36 40-1421 Fitting
with a “super pump” spring provided in our spring kit 12-0855 12-0853
13-9222. Works in stock 1981-99 oil pumps as well
as S&S and other aftermarket oil pumps. Fits 1981-
99 without oil vent. VT No. 12-9921
Chrome Oil Pump Cover mounts onto the
existing bolts on 1970-84 Big Twin models
with chain oiler fitting.
VT No. 42-0041
Oil Pump Rebuilds. 12-0851
12-0296 1936-40
Rear Chain Oiler Fitting fits 1941- 12-0271 1941-49
12-0295 1950-64
69 FL, zinc. Fitting is positioned
12-0855 1968-69
between the oil pressure gauge and 12-0853 1970-72
oil pump fitting. VT No. 12-1280 12-0297 1973
12-0852 1974-77
12-0851 1978-91
490
12-0166 F 12-0169
Oil Pump
9694-19 Replica Oil Pump Mount Kits for Big Twins
E
includes studs where required. Available as
12-0168 12-0174 stock style fasteners in chrome, cadmium, park‑
12-0167 erized or zinc finish or as custom kits in acorn or
allens.
Chrome Cadmium Parkerized Zinc Acorn Allen Years/Style
8740-19 8741-19 9694-19 — — — 1936-67 OHV
8742-14 8743-14 — — — 8746-12 1968-77 Stock
8744-12 — — 9787-12 7827-12 8747-12 1978-91 Stock
12-0812 S&S Oil Pump Gasket and Master Rebuild
Kits are available with paper or mylar gaskets.
Gasket kits include inner and outer gaskets,
drive shaft key and snap ring. Master rebuild
kits include seal, snap rings, springs, ball,
inner and outer gasket, O-rings, and keys.
Gasket Kit Master Rebuild Kit Type Year
VT No. Jims # OEM Type Year
15-0657 — Mylar 1936-91
CLASSIC
12-1449 26345-36 Drive Gear 1936-72
12-1220 D 26325-36 Scavenger Idler 1936-48 15-0658 15-0361 Paper 1936-91
12-1221 A 26315-36 Feed Drive 1936-47 15-0362 15-0364 Mylar 1992-99
12-0179 B 26317-36 Feed Idler 1936-47 15-0363 — Paper 1992-99
12-0167 C 26320-36 Scavenger Drive 1936-67 A-Long Oil Pump Nut with ¼-24 thread. Used on
12-0168 A 26315-48 Feed Drive 1948-73 1936-67 OHV. Sold each.
12-0182 12-1434 C 26315-68A Scavenger Drive 1968-98 VT No. Finish
12-0166 B 26317-48 Feed Idler 1948-61 8108-1 Chrome
12-0170 B 26317-62 Feed Idler 1962-67
12-1420 12-1435 D 26317-68A Scavenger Idler 1968-98 8109-1 Cadmium
12-0169 D 26325-49 Scavenger Idler 1949-61 9674-1 Parkerized
12-0174 D/B 26326-62A Scavenger Idler 1962-98 B-Standard ¼ - 24 Thread Hex Nut, 12
12-0801 G 26327-68 Idler Shaft 1968-99 pieces.
12-0800 G 26327-52 Idler Shaft 1962-67 8110-12 Chrome
12-1437 A 26328-74 Feed Drive 1974-98 8111-12 Cadmium
12-9905 E 26237-50 Cover 1948-67 9673-12 Parkerized
12-0805 26346-70 Drive Shaft 1970-99
12-0812 26346-36 Drive Shaft 1936-67
12-0803 26346-36 Drive Shaft 1936-67
12-0804 26346-68 Drive Shaft 1968-69
10-0703 24641-36 Bushing 1936-99 14-0009
40-0510 F 26424-50 Fitting 1948-67 12-1480
12-0204 26340-36 Key 1941-67
Oil Pump Gasket Kits include gaskets, seals, snap ring, balls
12-0205 26348-15 Key 1936-67
16-1033 Burnish Tool All and keys. Spring and ball bearing not included with James kits.
*Note: Gear is used as scavenger idler from 1962-67 and James GB No. Type Year/Model
feed idler from1968-98 — 12-1480 Paper 1936-40 Over Head Valve
15-1184 14-0008 Paper 1941-49 Big Twin
15-0851 14-0009 Paper 1948-67 Big Twin
15-0852 15-0193 Mylar 1968-80 Big Twin
15-0853 14-0025 Paper 1968-80 Big Twin
12-0808 15-0854 15-0233 Mylar 1981-91
12-0809 12-0811 B
15-0855 14-0026 Paper 1981-91
Sifton Big Twin Oil Pump Drive Shaft Kit includes 3 keys, A
shaft gear, bushing and snap ring. Big Twin Oil Pump Gaskets are available in 10 pack.
Kit Shaft Year James GB No. # OEM Use Years
12-0810
12-0808 12-0812 1936-67 15-0939 15-0127 B 26246-68A Case 1968-80
12-0809 12-0804 1968-69 — 15-0455 26246-68A Case 1968-80
12-0811 — 1970-72 15-0952 15-0137 B 26273-80B Case 1980-91
12-0810 12-0805 1973-99 — 15-0727 26245-41 Case 1941-67 (Mylar)
Oil Pump Mounting Screw replaces 1397 15-0126 — 26245-41 Case 1941-67 (Mylar)
for use on all 1941-49 Big Twin models. 15-0949 — A 26258-68B Cover 1968-80
VT No. 12-1405 15-0940 — B 26246-68A Case 1968-80
15-0953 15-0295 B 26273-80B Case 1980-91
Sealing Washers for oil fitting, pressure switch, relief valve, 15-0956 15-0296 A 26276-80A Cover 1980-91
check valve, and tappet oil screen in brass.
VT No. OEM Fits/Type
14-0031 6156 1941-69 Big Twin Adjuster Screw 14-0031
14-0032 6581 1954-78 Big Twin Relief Valve Plug
14-0033 6377 1950-99 Big Twin Oil Pressure
14-0178 6375 1946-57 Big Twin Pressure Switch
491
Big Twin Oil Pump
Tappet Oil Screen, Oil Pump Check
Valve and Relief Valve Plugs. 12-0159
Replacement styles as shown. Oil Screen Parts Kit for 1952-62 includes all parts shown
249756-52 screen, 24985-52 housing body, 8856 ball, 24992-
52 spring, 24987-52 plug, and 24994-52 washer.
VT No. Item
12-0159 Kit
9606-2 8707-6 12-1522 Screen, each
15-0306 Cork Seal, 24990-52, 10 pack
12-0176 Housing Body
9644-2 A-Relief Valve/By Pass Kits include spring,
37-9226 J
plug and valve.
VT No. # OEM Fits Finish VT No. Year
8702-2 G 26362-36 1936-80 Check Valve 12-1477 1937-53
9523-1 B 26362-36 1936-80 Check Valve Chrome 37-8946 1954-67
9524-1 B 26362-36 1936-80 Check Valve Cadmium 12-1484 1968-72
9525-1 B 26362-36 1936-80 Check Valve Parkerized 12-1485 1973-80
9526-1 A 26367-36 Stock, 37-52 By By-Pass Chrome 12-1486 1981-2000
9527-1 A 26367-36 Stock, 37-52 By By-Pass Cadmium
B-Check Valve Kits include ball, spring and
9528-1 A 26367-36 Stock, 37-52 By By-Pass Parkerized
8704-2 G 24987-52 1952-65 Tappet Screen Chrome cap.
9603-2 C 24087-52 1952-65 Tappet Screen Chrome 12-1490 1936-55 and 1966-80
9604-2 C 24987-52 1952-65 Tappet Screen Cadmium 12-1489 1956-65
9605-2 D 26377-54 Oil Pump Relief 1954-67 Chrome 12-1487 1981-99
9606-2 D 26377-54 Oil Pump Relief 1954-67 Cadmium Oil Pump Relief Valve Kit for
8705-2 G 655 1966-69 Tappet Screen Chrome 1954-67 includes plug, spring
9874-2 C 655 1966-69 Tappet Screen Chrome and valve. VT No. 37-8946
9875-2 C 655 1966-69 Tappet Screen Cadmium
37-9224 3 Plugs 1966-69 Set Chrome A-Relief Valves and Springs.
8706-6 G 3 Plugs 1970-80 Set Chrome VT No. OEM Years Item
8707-6 G 26263-80 1981-99 3 Piece Set Chrome 13-0107 26374-54 1952-72 Spring
37-9225 H 3 Plugs 1970-80 Set Chrome 13-0217 26374-42 1941-52 Spring
37-9226 H 3 Plugs 1981-99 Set Chrome 13-0111 26207-83 1983-00 Spring
2074-6 H 3 Plugs 1981-99 Set Chrome 12-1417 26400-54 1954-81 Valve
2073-2 H 1981-99 1981-99 Each Chrome B-Check Valve Springs.
8701-2 G 657 1970-80 Tappet Screen Chrome VT No. OEM Years
8701-2T G 657 1970-80 Tappet Screen Chrome 13-0113 26363-36 1936-55
9876-2 C 657 1970-80 Tappet Screen Chrome 1966-76
9877-2 C 657 1970-80 Tappet Screen Cadmium 13-0114 26363-56 1956-65
8700-2 G 26377-68 1968-80 Relief Valve Chrome 13-0112 26262-80 1981-99
37-9068 E 26377-68 1968-80 Relief Valve Zinc C-Ball
9607-2 E 26377-68 1968-80 Relief Valve Chrome 12-0158 8866 1954-99
9608-2 E 26377-68 1968-80 Relief Valve Cadmium
9608-2T E 26377-68 1968-80 Relief Valve Cadmium Oil Screen Kit includes proper plug,
8703-2* G 26263-80 1980-99 All Chrome screen o-ring and spring.
8703-2T* G 26263-80 1980-99 All Chrome Chrome Stock Years
9644-2* F 26263-80 1980-99 All Chrome Cap Replica
9645-2* F 26263-80 1980-99 All Cadmium
12-0219 12-0151 12-0219 1970-80
9634-4 F 26263-80 1980-99 2 Piece Set Chrome 12-0152 12-0220 1981-84
9635-4 F 26263-80 1980-99 2 Piece Set Cadmium — 12-0159 1952-62
37-8960* J 26279-89 1981-99 All Dome Acorn 12-0162 12-0217 1963-65
*Note: The 1981-up uses the same plug on check valve, tappet 12-0220 12-0150 12-0218 1966-69
screen and relief valve 12-0162 Tappet Oil Screens are exact
{C A
A-Bypass Kit fits 1937-40 EL and FL. replacement of OEM, sold each.
VT No. 12-1477 12-1522 24975-52 1952-62
B-Oil Pump Adjusting Screw Kit fits 12-1529 24975-63 1963-65
1936-54 Big Twin and 45, includes 12-1516 24981-66 1966-69
screw, shims, washer and nut. 12-1515 24981-70 1970-99
Oil Screen Spring for the tappet oil
B VT No. Item
12-1465 Kit
12-0584 Screw
screen, sold in pack of 10.
13-0216 24992-52 1952-62
13-0164 24979-63 1963-65
C-Check Valve Kit includes cap, 13-0108 24982-66 1966-69
spring and ball. 13-0109 24982-70 1970-82
VT No. 12-1481 “Super-Pump” Spring Kit for 1966-91 Big Twin.
VT No. Brand
13-9222 E.R.T. SP-1
492
Breather Gear
12-1510 Stock Plastic Breather Valves. 12-0788 12-1537
VT No. OEM Year
12-1531 25310-82A L1977-99
12-1953 As Above .005 Oversize
12-1531 C-Breather Valve Thrust Washer 12-9967
Set for 1950-99 Big Twin includes A-Big Twin Steel Breather Valve is a machined breather
one of each size noted. valve and gear. Designed to replace the stock steel or plastic
VT No. Fits Set units. Order 8-piece thrust washers separately. Available in
12-1510 1979-82 8 Steel stock duration only with either standard or +.030 oversize out-
Breather Valve .110, .115, .120, .125 side dimension.
Thrust Washer Set .130, .135, .140, .145 VT No. Year Size Brand
for 1950-78 Big Twin. 12-1530 1982-99 8 Plastic 12-0788 1936-47 Standard Sifton
Made of steel, one of .130, .135, .140, .145 12-0786 1936-47 +.030 Sifton
each of the following: 12-9967 1936-47 Standard S&S
.150, .155, .160, .165
110, .115, .120, .125 12-9968 1936-47 +.030 S&S
VT No. 12-1509 12-9907* 1948-77 Standard S&S 12-9907
12-1536** 1948-77 Standard Sifton
CLASSIC
12-1561* 1948-77 Standard Sifton
12-1945 12-1945 Sifton Air Ramp fits S&S/ 12-9956* 1948-77 +.030 S&S
Installed Sifton Breather Gear on 1936- C 12-1509
12-9906* 1978-99 Standard S&S
99 models to remove more 12-1537* 1978-99 Standard Sifton
air and oil from crankcase. 12-9957* 1978-99 +.030 S&S
Requires removal of screen for 12-9909 All Washer Set S & S
installation. Gear not included. 12-1510 All Washer Set Sifton
VT No. 12-1945 *Note: Requires use of late style thrust washer 12-1510 or
12-9909.
Ball Bearings **Note: Includes thrust washer set 12-1510
Oil Pump Drive Gear Set fits 1973-84
12-0172 12-0164 12-0129 12-0157 FL-FX.
VT No. 12-1546
12-1496
VT No. OEM Size Use/Fits
12-0172 8854 ³⁄₁₆” 1948-52 Hydraulic Unit
12-0161 8856 ⁷⁄₃₂” Clutch Hub,1941-54 All
12-0164 8858 ¹⁄₄” Oil Filler, 1948-64 12-1496
12-0158 8866 ³⁄₈” Check valve,1941-up FL-
FLH,Classic, 1971-up all FX, Sifton High Flow Pinion Shaft Oil Pump Drive Gear for
1954-up all XL 1939-53 OHV Big Twins. 6 Tooth gear increases oil flow rate
12-0129 ³⁄₈” Nylon Ball Bearings by approximately 25%. Requires use of late style (OEM#
12-0156 8872 ¹⁄₂” Shifter Cam Plunger 26345-73 VT No. 12-1407) oil pump drive shaft gear. Also
1941-76 with Handshift available as a kit that includes correct drive shaft gear.
12-0157 8860 ⁵⁄₁₆” Clutch Ramp Assembly VT No. Item
Steering Head 12-1496 Pinion Shaft Gear only
1971-83 All XL, 1954-78 All XL 12-1505 Kit
Breather Parts 12-9908

12-0102
Cap and Collar

have been
12-0101 pressed together
Big Twin Pinion Part Kit is complete with proper parts. Primary Breather Tubes for Big Twin models.
VT No. Fits Kit VT No. # OEM Years Item
49-1743 543-36 1936-38 Tube
12-0101 1936-53 Five Piece Kit 12-1514 A 24912-48 1948-57 Tube
12-0102 1955-69 Four Piece Kit 12-1448 A 29411-36 1936-47 Tube
12-0103 1937-53 WL Two Piece Kit 12-0997 A&B 1936-47 Kit
Pinion Shaft Seal Ring is used on all 1940-53 Over Head 12-1528 B 24918-64 1936-57 Snoot
Valve Big Twins, sold each. Replaces 24697-40. 12-9908* C Kit 1958-64 All
VT No. 12-1525 12-1513 D 24918-58 1958-64 Rubber Nipple
12-9775 Breather Spacer & Washer Set
12-1517 Breather Screens and Separator fits 1936-69 Big
Twin, sold in packs of 5. 12-9753 24922-58 Breather Collar
VT No. OEM Item 40-0547 E 24912-65 1965-66 Tube with Nut
40-0548 F 24913-67 1967 Tube with Nut
12-1518 12-1517 25275-36 Screen 12-1191 24914-58 1958-64 Stud Only
12-1518 25279-36 Separator *Note: Includes 24925-58 spacer, 24914-58 stud, (24922-58
collar, 24923-58 cap Note: cap and collar have been pressed
together) and 24918-58 rubber ripple. 493
Cam Cover 1948-69 Big Twin
Chrome Forged Alloy
Cam Cover fits 1948-
62 Big Twins. Includes
bushings installed.
VT No. Years
10-0076 1948-53
10-0126 1954-62
10-0066 10-0067, 10-0076
10-0068
10-0077
10-0079
Installed
10-1939 10-1939 Installed
10-0026 10-0026
Underside
10-0065
10-0065 Installed 10-1940

10-1936 10-1936
Big Twin Gear Covers available in raw finish include bushings 10-1940 Underside
and breather pipe. All covers must be reamed for final fit. Flatside Style Cam Covers feature natural finish aluminum
VT No. OEM Year Style with bushings installed. VT No. 10-0077 and 10-0026 accept oil
10-1936 584-39 1936 Smooth passage bolt.
10-1939 584-37 1937-39 Smooth VT No. OEM Year Finish
10-0065 25216-36 1940-47 8-Fin 15-0491
10-0077 25216-65 1963-65 Cast
10-0066 25216-48 1948-53 8-Fin 10-0079 25216-66 1966-69 Cast
10-0067 25216-48 1948-53 4-Fin 10-0026 25216-61 1963-65 Chrome
10-0068 25216-58 1954-62 4-Fin
10-1940 25216-66 1966-69 Chrome
15-0300 Cam Cover Gasket, 1936-47
Stock Slotted Style Screws.
15-0491 Cam Cover and Tappet Gasket Kit, 1936-47
VT No. Year Finish Thread
15-0492 Panhead Cam/Lifter Base Gasket Kit, 1948-69
8149-12 1936-69 Chrome 24 9621-12
8150-12 1936-69 Cadmium 24
9621-12 1936-69 Parkerized 24
2101-12 1950-52 Chrome, Phillips 24
9794-12** 1936-69 Chrome 20
9795-12** 1936-69 Cadmium 20
8771-2* 1963-65 Chrome
10-0347 10-0342 8772-2* 1963-65 Cadmium
*Note: Oil Passage Bolt
Chrome Allen Style 8772-2
8755-12 1936-69 Chrome 24 (Replica V-Twin)
9827-12** 1936-69 Chrome 20 (S&S)
**Note: For Aftermarket Cases except V-Twin and Replica Cases
Sifton Patches.
10-0341 VT No. Style
Replica Cam Cover with OE numbers cast in! 48-1327 Logo
VT No. Fits Model 48-0368 Handshake
10-0347 1938-40 Knuck 48-0368 48-1208 48-1208 Cam
48-1327
10-0342 1941-47 Knuck 48-1163 Knucklehead
10-0341 1948-52 Panhead
494
10-0498 10-0499
Cam Cover for
1970-92 Big Twin
10-0317
10-0110 10-0090
CLASSIC
10-0088 10-0111
10-0318
10-0040 10-12985
Nose Cone Gear Covers fit 1970-Early 73 Big Twin models

with side oiling pinion shaft or 1973-92 end oiling models.
10-0334 Polished, or chrome with bushings installed. Seal included.
VT No. Years Finish Brand
10-0110 1970-73 Chrome MC
10-0090 1970-73 Polished MC
10-0088* 1973-92 Polished MC
10-0040* 1973-92 Chrome V-Twin
10-0111* 1973-92 Chrome MC
10-1298* 1973-92 Black MC
*Note: Includes gaskets and mounting screws. All other num-
bers include seal only.
Form Fitting Chrome Steel Covers fit
over stock cam cases on Big Twins. No
need to remove cam case or disturb cam
or gears. Covers held in place by existing
10-0316 screws. Fits 1970-92.
42-0111 VT No. 42-0111
8761-7
7402-7
9305-7
Gear Cover Screw Sets.
Acorn Allen Stock
1970-92 Finish Type
9305-7 Chrome Stock
9306-7 Cadmium Stock
8761-7 Chrome Allen
7402-7 Chrome Acorn
Cam Chest Kit includes internal Big Twin replacement type Quick Change Cam Gear Gasket
parts for years listed, including a Sifton cam, replica cam and Seal Kit fits Shovelhead and
cover and hardware. Evolution engines, includes both
VT No. Year Model VT No. Year Model cork and quad seals for pushrods to
10-0317 1948-53 Panhead
10-0349 1936 Knucklehead 10-0318 1954-62 Panhead fit all year range.
10-0498 1937-40 Knucklehead 10-0334 1963-65 Panhead James GB No. Year/Model
10-0499 1940-47 Knucklehead 10-0316 1966-69 Shovelhead 15-0871 15-0659 1970-92 Big Twin
495
1948-84 Big Twin Cam
Valve Lift
Duration
VT No. Year Grind Timing Application
@ .053 Shovel Pan
CAMS FOR STREET AND DRAG APPLICATIONS
-6/46 220 .390 .412 Stock H/D front cylinder timing
Stock (Front Cyl.) H/D Cams 44/20 244 .390 .412 Listed for Comparison
14/38 232 .390 .412 Stock H/D front cylinder timing
Stock (Rear Cyl.) H/D Cams 44/20 244 .390 .412 Listed for Comparison
10-2011 1948-69 J 21/41 242 .405 .425 Mild street; Panheads and Shovelheads, smooth idle more power through
10-2020 1970-77 R.P.M. range. Bolts in with no head work.
10-2030 1978-84
10-2260 1948-69 A2 19/43 242 .450 .470 Bolt in cam that requires no head work. More mid range and hi end power. Idle unaffected.
10-2263 1970-77
10-2267 1978-84
10-2310 1948-69 AB 21/43 244 .450 .470 “A” Intake and long duration exhaust for cooler running and more high-end power.
10-2320 1970-77 Both in street cam (except 80-81).Okay. for Hydraulic Lifters.
10-2331 1978-84
10-2351 1948-69 B2 26/50 256 .485 .507 Street Drags: More mid range and high end power, smooth idle. Best cam for modified 74/80
10-2353 1970-77 cubic inch and small strokers. Spring spacing required.
10-2358 1978-84
10-2430 1970-77 BH 24/52 256 .450 .470 Hydraulic version of a “B” cam. Usually a bolt in but spring spacing may be required on 1980-81
10-2440 1978-84 Shovelheads.
1948-69 7 29/53 262 .510 .535 Upgraded version of original #6 Grind. Great street cam for 84/88 inch strokers. Maximum
10-2265 1970-77 Torque available from 2200 to 6500 R.P.M
10-2266 1978-84
10-2600 1948-69 C 37/61 278 .525 .550 Best production cam made for big street engines. Strokers from 84” to 96” will really turn on with
10-2610 1970-77 this cam. Broad torque range pulls from 2000 to 7000+ R.P.M.
10-2620 1978-84
CAMS FOR LOW COMPRESSION ENGINES
10-2420 1948-69 B Bolt In
10-2130 1948-69 1 16/36 232 .427 .450 This is the low compression piston version of “A” grind cam for 74 and 80 cubic inch for engines
10-2140 1970-77 with 7.5 compression pistons.
10-2150 1988-84
10-2350 1978-84 2 15/35 230 .490 .512 Low compression piston version of a “B” grind cam. Cam features more power through R.P.M.
range
10-2630 1948-69 3 23/43 246 .514 .540 High lift, short duration for motors 84 cubic inch engines or larger. More power for small strokers
10-2640 1970-77 with 7.5 compression pistons
10-2650 1978-84
HIGH PERFORMANCE & DRAGSTER CAMS
10-2740 1948-69 M 28/56 264 .590 .210 Street Drags: 88+ cubic inch engines maximum mid-range torque cam 3000/6500 RPM. OK for low
10-2750 1970-77 compression on street. Andrews springs and collars make installation easy.
1978-84
10-2850 1948-69 9 32/64 276 .530 .222 Drags: Broad tip design for maximum mid-range power for strokers from 88 cubic inches and larg-
10-2860 1970-77 er. Requires Andrews springs and collars for head set up and installation.
10-2870 1978-84
10-2890 1948-69 10 34/70 284 .580 .230 Maximum output dragster cam for BIG motors from 92” cubic inch and up.
10-2900 1970-77 70/34 284 .580 This cam is for best torque up to 6500 R.P.M. Requires Andrews springs and collars.
Competition Cams
VT No. Year P/N Duration Valve Lift Valve Timing Lift @ TDC
Application @ 053 Open/Close
Hydraulic
Intake Exhaust Intake Exhaust Intake Exhaust Intake Exhaust
10-5009 78-84 Very good torque and mid- SHV4000 236 236 .450” .450” 14/42 42/14 .093” .093”
10-5010 70-77 range. Good roll on power. SHV-4001
10-5011 78-84 Good torque strong mid- SHV4010 236 236 .485” .485” 14/42 42/14 .093” .093”
range and good roll on power.
10-5016 70-77 Performance cam. Use with carb, SHV-4031 252 252 .485” .485” 22/50 50/22 .120” .120”
pipes and valve springs.
The Leader in Performance Technology

Specifications
Series
DURATION @ .053”
VT No. Year Gross Valve Lift Grind TYPE & APPLICATION
OPEN/CLOSEa Number
INT. EXH. INT. EXH.
10-4374 1948-69 286 286 .575b .575b Hi-Roller MECHANICAL - Drag cam for large cubic engines. Head work required for proper spring travel,
41/65 73/33 .606 c
.606c 330B piston-to-valve, and valve-to-valve clearances, also to insure maximum performance Camshafts
Cam lift at TDC: Int: .192” Exh: .164”* having over .450” valve lift in 1948-69 engines, will need to have front
496
S&S Cam
VT No. Year S&S# Application Valve Valve Valve Valve Valve Lift Lift @ Lift @ Requirements Lifter Type
Timing * Timing * Duration Duration Shovel/Pan TDC + TDC + Spring Spacing
Intake Exhaust Intake Exhaust Intake Exhaust
Open/ Open/
Close Close
10-5045 1978-84 S&S Engines up to 88” with up +8.5:1. 18°/38° 40°/18° 236° 238° .475”/.453” .158” .152” No Bolt In Hydraulic
Good low and mid range torque.
10-5050 1948-69 S&S 80”/84” to 96” engines with 8.5:1 23°/43° 43°/23° 246° 246° .514”/.540” .169” .169” Yes Solid
514 or less CR. Good mid range.
10-5047 1970-77 S&S 88” to 103” engines with 9:1 to 20°/55° 60°/20° 255° 260° .587”/.560” .168” .164” Yes Solid
10:1 CR. Strong power through-
560S
out RPM range.
*Note: Timing designation is function of zero lash @ .053” off base circle.
+Lifts at TDC are measured at the valve and are for reference only. Overlap valve lifts must be checked on assembled motor. Minimum valve to valve clearance of
.040” is recommended.
Sifton Cam
CLASSIC
Sifton Patches.
48-1327 Logo
48-0368 Handshake
48-0368 48-1208 Cam
48-1327 48-1208
For Identification check these applications:
1978-86 New Shovelhead and 1977 Low Rider
1970-77 Alternator Shovelhead
For 1948-84 Big Twins

VT No. Year Cam Degrees At .053 Lift TDC Travel to Free
Side Kick Cam is similar to 102 but with more top end power. Requires no head work to install. Do not use with hydraulic tappets.
— Late 1948-69 103 Opens Closes Total TDC Coil Bind Travel
10-0610 Late 1970-77 Inlet 28° 57° .390 .174 .420 .470
10-0611 Late 1978-84 Exhaust 53° 27° .390 .174 .420 .470
Aristocrat Cam shows significant gain over stock, requires no head work to install. Fits 1948-up. Do not use with hydraulic tappets.
— 1948-69 102 Opens Closes Total TDC Coil Bind Travel
10-0601 Late 1970-77 Inlet 32° 56° .412 .200 .440 .490
10-0602 1978-84 Exhaust 53 28 .412 .185 .440 .490
Avenger Cam performs best in 86” and 93”cubic inch engines with 4-Speed works well with hydraulic, perform best with solid lifters.
10-0603 1948-69 109 Opens Closes Total TDC Coil Bind Travel
Inlet 32.5° 50° .440 .211 .470 .520
Exhaust 58.5° 30° .440 .200 .470 .520
Crusader Cam is a good cam for low end and mid range and is designed to be used with hydraulic lifters.
— 1948-69 107 Opens Closes Total TDC Coil Bind Travel
10-0668 Late 1970-77 Inlet 29° 54° .440 .193 .470 .520
CUBIC INCH CHART

Stock 74" 80"
Stroke
STROKE 3¹⁄₂” 3.968” 4¹⁄₄” 4¹⁄₂” 4⁵⁄₈” 4³⁄₄” 5.00”
B 35/16” 61”
O 37/16”
31/2”
64.8” 73.7”
67.2” 76.3”
78.7”
81.6”
83.4”
86.6”
85.7”
89.0”
88.0”
91.4”
92.8”
96.1”
R 35/8”
311/16”
72.1” 81.7”
74.6” 84.7”
87.4”
90.7”
92.9”
96.1”
95.5”
98.8”
99.0”
101.5”
103.2”
106.8”
E 313/16”
37/8”
79.9” 90.6”
82.3” 93.4”
97.0” 102.8” 103.7” 108.9”
100.1” 100” 108.9” 111.9”
114.2”
117.8”
4.00” 87.9” 99.7” 106.8” 113.0” 116.1” 119.3” 125.6”
41/8” 93.4” 106.0” 113.5” 120.2” 123.5” 126.9” 133.6”
41/4” 99.2” 112.6” 120.5” 127.6” 131.1” 134.7” 141.8”
1 cubic inch = 16.38 cc Cubic Inch = πr2 x Stroke

1 cubic inch = .0163871 liter r = 1/2 of Bore
497
1936-84 Replica Cam Crane Stock Cams built to original speci-
fications. Gear included.
VT No. OEM Fits
10-8166 25523-70 1970-77 FX
10-8167 25523-77 1977-84 FX
10-8181 10-8201 10-8213
Andrews Knucklehead and 61” Engine Cams

10-8168 10-8208 10-8174
VT No. Year Grind Timing Duration Lift
10-2965 36-47 N 14/42 236 .355
10-8176 42/14 236 .355
Stock replacement Knucklehead cam. For stock motors or
restorations, this is the cam.
10-8204 10-8205 10-2970 36-47 S 27/55 262 .370
55/27 262 .370
Bolt in Knucklehead replacement for stock engines with
10-8202 smooth idle, strong pull to 6000 RPM, equivalent of a “B” cam.
10-2980 36-47 K 35/63 278 .367
63/36 278 .367
10-8202 10-8179 Bolt in performance Knucklehead cam. Best with 9.5 or higher
Sifton Stock Cams are replica type. Available as cam kit with compression and/or stroker flywheels. 3000/7000 RPM power
range.
matching pinion gear or as cam only. *Note: Lightning type 10-2960 48-51 K 35/69 278 .367
Cam Kit Fits 63/36 278 .367
10-8181 10-8201 1936-47 Knucklehead Stock replacement for 61” Panhead.
10-8213* 10-8212 1948-69 Panhead-Shovelhead
10-8168 10-8208 1957-69 Panhead-Shovelhead 12-1953
12-9957
10-8213 1957-69 with holes
10-8174 10-8204 1970-77 FLH
10-8176 10-8205 1977-84 FLH
10-8179 10-8202 1977-84 FX
Cam Chest Breather OEM Gear is precision ground to OEM

specification.
Year VT No. S&S Size Note
1936-47 12-0788 12-9967 Standard Steel
1936-47 12-0786 12-9968 .030 Steel
10-8264 10-8263 1948-77 12-1536* 12-9907 Standard Steel
1948-77 12-1561 — Standard W/Washer
1948-77 — 12-9956 .030 Steel
1978-99 12-1537 12-9906 Standard Steel
1978-99 — 12-9957 .030 Steel
1978-99 12-1531 — Standard Nylon
1978-99 12-1953 — .005 Nylon
Set 12-1510 12-9909 STD Washer
10-8262 10-8261
*Note: Includes 12-1510 Washer Set
Cam Needle Bearings feature full com-

pliment roller design. OEM# 9058. Fits
1958-99 Big Twin.
VT No. Brand
12-0397 V-Twin
12-0316 Koyo
10-8260
Sifton Cam Bushing Kits. Big Twin type includes cam and gear 16-1271 Sifton Inner Cam Bearing
shaft bushings/bearings with lock pins and thrust plate. Remover Tool allows
VT No. Year removal of needle bearing
10-8264 1936-53 and will also keep needles
10-8263 1954-57 from falling into engine. Fits
10-8262 1958-69 1958-99 Big Twin.
10-8261 1970-72 VT No. 16-1271
10-8260 1973-92
498
Cam Shaft Gear
Pinion Shaft Gears. Orange is
the largest, yellow is the small-
est on 1936-77. For 1977-89
10-0629 10-0578
orange is largest, black is small-
12-1379 12-1399 est. *denotes OEM type
1936-53 1954-77 Size/ 1977-89

Size/
OHV BT OHV BT Color OHV
Color
24010-39 24010-54 OEM Big Twin
12-1399* — Standard —
— 12-1379* Standard —
— 12-1268 Orange 12-9938 Orange
— — Black 12-9943 White 10-0626
— — Red 12-9945 Yellow
— — Blue 12-9940 Red
— — Green 12-9941 Blue
12-1265 12-1273 White 12-9942 Green
CLASSIC
— — Brown 12-9939 Black 10-0627
— 12-1275 Yellow —
12-1995
12-1393 12-1479
10-0660
V-Twin Motor Shop Cam Chest Kit includes internal Big Twin
12-1491 replacement type parts for years listed including a SiftonTM cam.
12-1492 12-1396
Order cam bearings and bushing kit separately.
Circuit Breaker Drive and Idler Gear fit 1936-69 Big Twins. VT No. Fits Model
Order shims separately to fit. Available as lightning with holes 10-0629 1936-47 OHV Knucklehead
or solid. *Note for high lift cams.
10-0578 1936-47 OHV Lightning
VT No. OEM Type Style
12-1388 25775-36 Idler S&S 10-0626 1948-57 Panhead
12-1397 25775-36 Idler Solid 10-0676 1958-64 Panhead-Shovelhead
12-1393 25775-36 Idler Lightning 10-0627 1965-69 Panhead-Shovelhead
12-1491 Sifton Idler Lightning 10-0660 1970-84 Big Twin Shovelhead
12-1492 Sifton Idler Solid
12-1396 25850-36A Drive Solid
12-1995* 25850-36B Drive Solid 10-0803 10-0804
12-1479 25850-36 Drive Lightning Idler and Circuit Breaker Drive Gear Shafts Kits.
12-1389* 25850-36 Drive S&S
Sifton VT No. Item
Shims Thickness
10-1292 10-0803 Idler Shaft Kit
10-4221 .050”
10-4223 .058” contains an idler shaft and a bushing, fits
10-4224 .062” 1941-69 Big Twin Over Head Valve
10-4225 .066” 10-1293 10-0804 Circuit Breaker Shaft Kit contains one shaft
and two bushings, fits 1941-69 Big Twin
12-1497 12-1498 12-0825 Over Head Valve
10-1294 10-1295 10-1296 10-0878
Reverse Rotation Circuit Breaker Drive Gear and Timer Idler and Circuit Breaker Kit.
Gear. Counterclockwise rotation gears allow use of dual fire late VT No. Year Type
type ignition to be installed in timer housing. 10-1294 1936-58 Circuit Breaker
VT No. Item 10-1295 1959-69 Circuit Breaker
12-1497 Circuit Breaker Gear 10-1296 1941-69 Idler
12-1498 Timer Gear with pin 10-0878 1936-69 Idler Gear Stud Kit
12-0825 Gear Kit
499
Tappet Assembly
10-0770 10-0588
10-0680 10-1451
Sifton Tappet Assembly Kit includes tappets with large single
axle roller design and hydraulic or solid units for 1953-84 Big Twin.
VT No. Type
Sifton Tappet Assembly; Sets of 4, feature centrifugal surface
10-0680 Hydraulic
fine grinding and precision fit rollers and pins. Solid units include
10-0768 Solid
adjuster screws and lock nuts.
10-1451 Hydraulic, 4 piece set, large pin roller
VT No. Size Year Type Model Sifton Big Twin Hydraulic Tappet
10-0770 STD 1948-52 Solid Panhead Assembly Set of Four, feature centrifu-
10-0771 .005 1948-52 Solid Panhead gal surface fine grinding and precision fit
10-0772 .010 1948-52 Solid Panhead max-axle rollers and pins. Fit 1953-84.
10-0588 .002 1953-85 Hydraulic Pan-Shovelhead VT No. U/M Outside Diameter
10-0671 10-0670 Set (4) .7310
10-0670 10-0673 Set (4) .735
10-0671 Each .731
VT No. Size Year Type Model
10-0785 STD 1948-52 Solid Panhead
10-0674 STD 1953-85 Hydraulic Pan-Shovel
10-0777* .005 1953-85 Hydraulic Pan-Shovel (.7367 OD) 10-0199
10-0778* .010 1953-85 Hydraulic Panhead-Shovelhead 10-0198
10-0670* Standard 1953-85 Hydraulic Panhead-Shovelhead Hydraulic Tappet Units replace 17920-53 fits 1953-85 Big Twin.
VT No. Brand U/M
*Note: Max Roller Type Roller Types 10-0521 Crane Each
Big Axle Standard 10-0199 SiftonTM Each
Big Twin Tappet Assemblies
include roller assembly installed. 10-0198 SiftonTM Four Piece Set
Choose Jims, Eastern or Sifton. Jims 10-0277 Replica Four Piece Set
does not include adjuster screws or 10-0333 VT Rowe Set
Sifton Hydraulic Tappet Assembly.
nuts where necessary. Jims available
Lifters with replica rollers. are sold in sets
with Big Axle Roller Assembly.
of four. Order hydraulic unit set separate-
Big Axle Standard ly. Also available in eight piece tappet and
Jims Eastern Sifton Size hydraulic unit kit.
1948-52 Solid VT No. OEM Item
10-0630 10-0500 — STD 10-0314
10-0313 18522-53A Tappet Body Set
10-0631 10-0501 — .005 10-0776 18522-53A As Above
— 10-0523 — .010 10-0315 18522-53S As Above, replica
— 10-0450 — .015 10-0314 Hydraulic Tappet Body and
1953-85 Hydraulic Lifter Set
10-0634 10-0504 — STD Solid Tappet Lightning Tappet Assemblies fit 1948-52 Big Twin.
— — 10-0570* STD (Set) Complete units precision machined and drilled for early
engines. Holes allow better lubrication in valve train.
10-0635 — 10-0505* .005
Adjuster screws included. Sold each unless noted.
— — 10-0525* .010 VT No. Size
— — 10-0681* .005 (Set) 10-0935
10-0935 STD, Set of 4
— — 10-0886* .010 (Set) 10-0512 STD
— 10-0530 — .015 10-0513 .005
— 10-0531 — .020
— 10-0532 — .025 Hydraulic Sifton Maxi-Axle Tappet Assemblies
*Note: V-Twin Replica Type Tappet fit 1953-84 Big Twin feature built in
integral pump unit to set as a full
hydraulic unit.
VT No. Size
10-0580 STD
Tappet Adjusting Screws and Nuts. 10-0541 10-0580 10-0581 .002
VT No. U/M Fits Item Type 10-0582 .005
10-0541 Set 1936-52 Big Twin OHV Kit OE Style 10-0585 .010
10-0985* Set 1936-52 Big Twin OHV Kit Eastern Style
10-0516 4 pack 1936-52 Big Twin Screw Eastern Style
12-0523 10 pack 1936-52 Split Nuts Eastern Style 10-0520
12-1196* 4 pack 1957-85 Big Twin Screw
*Note: ⁹⁄₃₂ - 32 thread.
Replacement Nuts fit each brand of pushrods or tappets. Tappet Roller Repair Kit includes four pins and four roller
VT No. Brand Size U/M assemblies for 1929-84.
37-8866 V-Twin ⁵⁄₁₆ - 32 4 pack VT No. Brand
12-0524 Eastern ⁹⁄₃₂ - 32 10 pack 10-0520 V-Twin
12-0524 12-1179 Pins Only, 10 pack
500
11-1604
Sifton Tappet Kit includes
chrome tappet blocks, integral
pump lifter set and steel push-
Tappet Kit
rods. 11-0599
VT No. Year Type
11-1604 1966-84 Shovelhead
11-1608 1953-65 Panhead
10-0683 11-1524
11-0596
10-0682
Tappet Block Kit includes four hydraulic tappets. 11-0597
CLASSIC
VT No. Finish
10-0682 Chrome Stock Solid Tappet Kit includes lifters with adjuster screw,
10-0683 Zinc pushrods and tappet blocks.
Sifton VT No. Years Type
11-1602 Performance Cam 11-0599 1966-84 Shovelhead
Kit includes cam, 11-1524* 1966-84 Shovelhead
solid lifters, push- 11-0596 1948-65 Panhead
rods and chrome 11-0597* 1948-65 Panhead
tappet blocks. Fit *Note: Zinc
Shovelhead 1970- Sifton Hydraulic Tappet and
Early 77 with .412 Pushrod Assembly includes
lift. four hydraulic lifter tappets,
VT No. four hydraulic tappet units,
11-1602 four pushrods and a tappet
block set. *Note: Require
separate purchase of correct
Sifton Hydraulic Pushrod/Lifter Set mounting screws.
includes four max axle lifters with integral VT No. Years Finish Type
pump and four adjustable steel pushrods 11-0590* 1953-65 Chrome Panhead
for 1966-84 Shovelhead. 11-0591* 1953-65 Zinc Panhead
VT No. 11-0028 11-0592* 1966-84 Chrome Shovelhead
11-0593* 1966-84 Zinc Shovelhead
Big Axle Power Hydraulic Glide Tappet Kit by Jims. Fits
1966-84 Shovelheads. Includes two billet aluminum polished
blocks and four power glide tappet assemblies.
VT No. Item
10-0641 Kit
10-0642 Tappet only, 10-0641
Standard
10-0643 Tappet only, .002 Oversize Tappet Kit includes front and rear zinc plated tappet blocks
10-0644 Tappet only, .005 Oversize and four solid tappet assemblies with lightening holes. Fits
Powerglide Hyradraulic Tappet 1953-1984 FL. Order mount screws separately, non-tapered
and Pushrods by Jims for 1966-84 head style with proper threads for your motor case either 1/4" x
Big Twins. Available as four tappets 20 or 1/4" x 24.
and four pushrods only. VT No. 10-0688
VT No. 11-2428
8204-4 8204-4T 11-1074
Solid Tappet Adapter Kit permits use of hotter cam to run

solid lifters by deactivating the hydraulic portion of the stock Tappet Kit includes chrome tappet block set and standard
tappet. Uses stock pushrods. Fits 1953-84 FLH Big Twin Pan- solid lifter set to be used with stock adjustable pushrods.
Shovelhead.
Tappets have lightning holes for added oiling. Adjuster screws
VT No. Brand
8204-4 Colony and lock nuts included. Fits 1953-1984 FL.
8204-4T V-Twin VT No. 10-0687
11-1074 Sifton 501
Pushrod Kit Taper Lite Adjustable
Pushrods for 1966-84
are manufactured from
11-9534 4130 steel with hard-
11-9533 ened adjusters and ball
ends. Designed to be
11-9704 installed without remov-
ing gas tank, rocker box
or camshaft cover. Set
of four. Use with stock
hydraulic lifters
VT No. 11-9704
Solid Pushrod Conversion

fits 1966-84 Shovelheads.
We put the adjuster into the
lifter body to increase the
stability of the pushrod at
11-9539 11-9540 greater angles. A tapered
split lock nut is used for the best way to lock the adjusting
bolt into the lifter body. We use a ⁵⁄₁₆-32 extra fine thread for
Solid Pushrod Kits include 4 alloy pushrods and adapters to easier and close adjustments. Pushrods are long enough to
convert stock hydraulic lifters to solid. Replacement rods avail- accommodate engines with stroker cylinders. Alloy pushrods
able separately. *Note: Colony have hardened steel tips.
Sifton VT No. Year Model VT No. 11-9535
11-9533 7131-12* 1953-65 Panhead Solid Tappet Kits for 1966-84
11-9534 7132-12* 1966-85 Shovelhead 74” and 80” Shovelhead are made from
11-9539 11-9539 Rods only For 1953-65 Kit aircraft quality 4130 seamless
11-9540 11-9540 Rods only For 1966-85 Kit chromoly tubing. Extremely
rigid, resists flexing even when
used with radical cams and
high spring rates. Lighter than
Sifton Pushrod Sets stock pushrods. Lengths are
are constructed of as long as possible for added
aluminum alloy with rigidity of adjuster. Each set includes 4 pushrods and 4 adjust-
heat treated steel able solid lifter adapters. Smaller diameter than most moly
ends. VT No. 11-9520 pushrod sets for clearance in pushrod cover tubes. Instructions
and VT No. 7122-4 included. Fits stock or .200 longer stroker cylinders.
do not include internal VT No. 11-9545
11-1345
11-9523 hydraulic valve.
Sifton Colony Year/Model Type Replacement Nuts fit each brand of pushrods or tappets.
11-1345 1948-52 Panhead OE Type 8780-4 Colony ⁹⁄₃₂ — 32 4 pack
11-9520 7122-4 1948-52 Panhead 74" Solid 37-8866 V-Twin ⁵⁄₁₆ — 32 4 pack
— 7519-4 1948-52 Panhead 61" Solid 12-0524 Eastern ⁹⁄₃₂ — 32 10 pack
11-1345 1948-52 Panhead Hydraulic *Note: ⁹⁄₃₂ x 32 thread 37-8866
11-9522 7515-4 1953-65 Panhead74" Hydraulic
11-9523 — 1966-84Shovelhead (Steel) Hydraulic
11-9524 7516-4 1966-84Shovelhead (Alloy) Hydraulic 11-9871
11-9527 7506-4 Conversion Pan/Shovel Top End Solid
V-Thunder Big Twin Pushrod Kits are

made from .049 wall 4130 chromoly steel Andrews Pushrods for 1966-84 are available in chromoly or
tubing. Have exacting tolerances for reliabil- steel aluminum. Pushrods are adjustable. All are stock diame-
ity. These rods fit stock or Velva Touch lifter ter, so there is no cover interference.
units. VT No. Andrews Type
VT No. Year Type 11-9871 292055 Aluminum
11-7706 1953-65 Stock 11-9872 292030 Chromoly
11-7707 1953-65 Shovelhead Stroker Pushrod Lifter Tool makes installation of
11-7708 1966-84 Shovelhead Stock pushrod easier, insert tool onto pushrod
11-7709 1966-84 Shovelhead Stroker end and lift. Use on Knucklehead, Panhead,
and Shovelhead.
VT No. Brand
3056-1 Colony
11-7708
3056-1T V-Twin
502
Tappet Base 1948-84 Big Twin
10-0923 10-0095
42-0902
Chrome Pushrod Cover Set with chrome lifter base covers

10-8173
as a complete dress up kit.
10-0095 Installed VT No. Year
42-0904 1948-65
42-0902 1966-79
CLASSIC
8605-16T 8709-8T
10-1325 10-0987
10-7530 Installed
Tappet Base Bolt Set for Big Twin models.

1936-75, ¼ — 24 Thread with stock lifter blocks
10-0113 VT No. Finish Style
8605-16 Cadmium Hex
8605-16T Nickel Plated Hex without taper
10-7530 8604-16 Chrome Hex
8604-16T Nickel Plated Hex with taper
8102-16* Chrome Slot
8103-16* Cadmium Slot
9622-16 Parkerized Slot
10-0988 7131-8 Chrome Acorn
8760-16 Chrome Allen
Big Twin Tappet Block fits 1948-83, in chrome or zinc finish. 2099-16 Chrome Phillips
Order seals and gasket kit separately. 2100-16 Cadmium Phillips
VT No. OEM Finish Type *Note: VT No. 8102-16 has a chrome screw slot, VT No 8103-
10-0923 Set Zinc Panhead 16 is cadmium and slotted for 1936-53 as stock, can be ret-
10-0095 Set Chrome Set ro-fitted with hex top versions.
10-8173 Set Zinc Set 1976-up with Stock Tappet Blocks. ¼ — 20 thread without
10-1325 Set Zinc Panhead taper.
10-0987 Replica Chrome Front and Rear 7628-8 Acorn 7628-8
10-0988 Replica Zinc Front and Rear
8726-8 Allen
10-7530 Set Alloy, raw 1948-52
8708-8* Screws Chrome 20T 1976-84 8709-8 12 point, Cadmium
8711-8* Screws Chrome 24T 1948-75 8709-8T Nickel Plated, ¹⁄₄ — 20 UNC
15-0550 Kit Gasket 1948-79 8708-8 12 point, Chrome
15-0551 Kit Gasket 1979-84 8710-8 12 point, Black
*Note: 12 point style for Big Twin For using late tappet bases, without taper, in early 1936-
15-0119 15-1542 75 cases with ¼ — 24 thread.
8712-8 12 point, Cadmium
8711-8 12 point, Chrome
8480-8 Acorn 8726-8
8727-8 Allen
Tappet Base Gasket for 1949-99.
¼ — 20 Thread Tapered Screws
GB James OEM Type
for aftermarket cases using pre1976 tappet blocks.
15-1542 — Set Three Front and Three Rear
9814-16 Chrome
15-0119 15-0926 18633-48A Rear
9828-16 Allen, Chrome
15-0120 15-0927 18634-48A Front
15-0236 Special Tappet Gaskets. 74 and 80 tap-
pet based gaskets without oil return holes
for use in engines with solid lifters five 8709-8
front and five rear. Fit 1941-85 Big Twin.
VT No. 15-0236
503
Pushrod Cover Kit
Chrome Lower Push Rod Tube Sets.
*Note: Gold Plated
11-0900 V-Twin Chrome Pushrod Cover
Kits in stock style gives all the
parts needed for complete instal-
lation. All are 16 piece kits.
VT No. Year Model
11-0900 1966-79 Shovelhead
11-0902 1948-65 Panhead VT No. Brand Year Model
11-0902 11-0906 1966-84 Stroker, 11-0922 V-Twin 1948-79 Panhead-Shovelhead
longer 7823-12 Colony 1948-79 Panhead-Shovelhead
11-0901 1980-85 Quad type 11-0907 V-Twin 1980-84 Shovelhead, Quad
11-1082 1966-84 Titanium
Chrome Replacement Upper Pushrod 11-0918* V-Twin 1980-84 Shovelhead, Quad
Cover Kits (Outer). Each kit contains four 7617-12 V-Twin 1936-39 Knucklehead
chrome clips, four springs, four cork gaskets, 7824-12 Colony 1940-47 Knucklehead
and four steel washers. 7824-12T V-Twin 1940-47 Knucklehead
VT No. Model Brand VT No. James Year Item
7509-20 Knucklehead (1936-39) Colony 15-0116 15-1137 1936-Early 79 Small Cork
7507-20 Panhead Colony 14-0028 — 1936-Early 79 Red Silicone
11-0929 Panhead V-Twin 15-0348 — 1936-Early 79 Rubber
7508-20 Shovelhead/Knucklehead Colony 15-0117 15-1138 1948-Early 79 Large Cover
11-0928 Shovelhead/Knucklehead V-Twin 14-0029 — 1948-Early 79 Red Silicone
8602-20 Shovelhead Stroker V-Twin
15-0349 — 1948-Early 79 Rubber
Inner Pushrod Cover Set in zinc plated steel
for 1936-78 type OHV. Set of four. 11-0915 11-0921
VT No. Year Type Brand Stroker 11-0915 Stock
7808-4 1936-78 Cork Colony
11-0924 1936-78 Cork V-Twin
11-0908 1979-99 Quad V-Twin
9213-4 1979-99 Quad Colony
Chrome Grooved Lower Pushrod Cover
Set made of billet, includes rubber seals.
Fits 1948-84 Panhead/Shovelhead.
VT No. 7135-8
Pushrod Cover Individual Parts, in chrome steel.
37-9079 VT No. Model U/M
11-0917 Cup, 1948-2017 4
11-1073 Cups, Hex, Brass, 1948-2017 4
37-9078 11-1073 11-0916 Clip, 1948-1965 4
Pushrod Cover Cup Set. 13-0101 Spring, 1948-2017 10 pack
VT No. Item 12-0711 Washer, Inner, 1948-2017 10 pack
37-9078 Chrome Skull 15-0117 Large Cork 100 pack
37-9079 Gold Skull 15-0116 Small Cork 100 pack
11-1073 Brass Hex 11-0915 1966-99 Big Twin Clip Stock 4
11-0024 Chrome w/Skull 37-9078 11-0921 1966-84 Big Twin Clip Stroker 4
37-9078
design 11-1076 Pushrod Clip
11-0029 Chrome w/
Black Skull
Pushrod Seals
Pushrod Cover Seal Kit for 1948-78 1936-47 Big Twin Pushrod Cover Seal
Panhead-Shovelhead. Available in rubber- Kits include enough pieces to seal four
14-0971 complete pushrod covers on years listed.
ized cork or blue rubber.
VT No. Color VT No. Color
8728-12 Rubberized Cork 14-0971 Blue
8729-12 Black
14-0970 Rubber
Pushrod Tube Quad Seals or
O-Ring Pushrod Cover Seal Kits include O-Rings. Quad Seals feature
enough pieces to seal four complete
Quad Cork four side seal design, 10 pack.
pushrod covers on years listed. 14-0508 14-0512
Available in cork, quad, machined rub- VT No. Use Year
ber seals. 14-0508 Upper Cover Small Quad 1979-84
James VT No. Type Model/Year 14-0512 Middle O-Ring 1979-up
14-0667 15-0626 Cork 1948-79 Big Twin 14-0514 Lower O-Ring 1979-80
14-0823 14-0970 Rubber 1948-79 Big Twin, Silicone 14-0513 Lower Cover Large Quad 1981-83
14-0669 14-0027 Quad 1980-84 Big Twin Silicone Seals are lathe cut, then ground with
Pushrod Lifter Tool makes installa- perfect outer diameter finish, withstand heat,
3056-1 3056-1T tion of pushrod easier, insert tool onto oil and gas.
pushrod end and lift. Use on Knuckle- VT No. OEM Item U/M
head, Panhead, and Shovelhead. 14-0028 17955-36 Small Push Rod 50 pack
VT No. Brand 14-0029 17955-48 Large Push Rod 50 pack
3056-1 Colony
504 3056-1T V-Twin
1948-65 Panhead Set
10-1086 10-1139
10-1074
10-1086
10-1074
CLASSIC
10-1067
10-1067
V-Twin “Motor Shop Ready” Panheads feature a Shovelhead

o-ring intake port and exhaust port design and require the use of
10-1341
the Shovelhead cylinders of installation. Heads are assembled
with cast iron valve guides, nitrated valves (Panhead exhaust/ 10-1345
Shovelhead intake), valve springs, lower spring collar, upper Panhead Big Bore Kit with cylinders and matching complete
spring collar, valve stem seals and valve keeper keys. Fully Panhead heads. This kit will fit 1970-1984 Shovelheads to
assembled sets include matched rocker arm assemblies, rocker convert to Panhead type, with overhead oiler system.
arm studs and valve oilers installed. Available with single spark Kit includes cylinder kit with cast pistons, head bolt set and
plug style only and for either stock or 3⁵⁄₈” big bore cylinders. rings. Complete Panhead head set comes with valves guides,
Order late style o-ring manifold separately. Can only be used springs and rocker arm assemblies. Note: Order Panhead
Shovelhead cylinders. valve covers, manifold, pan gaskets and pushrod covers sep-
Fully Heads Bore arately.
Assembled with valves VT No. Bore
10-1086 10-1139 3⁵⁄₈” Big Bore 10-1341 3⁵⁄₈”
10-1067 10-1074 Stock Bore 10-1345 3¹⁄₂”
Watch Our Videos!
http://www.youtube.com/user/TeddCycle
Motor Shop Welding Service Motor Shop Exhaust Port Replacement

505
Panhead Set 10-1066
10-1175
10-1066
10-1455
10-1175
10-1957
V-Twin Replica “Shop Ready” Panhead

• Feature original contour castings with the added detail of the stock
intake and exhaust port areas.
Head are assembled with cast iron guides, valve stem seals, nitrat-
ed valves (Panhead exhaust, Shovelhead intake) valve
springs, upper spring collar, lower spring collar and valve
keeper keys.
• Fully assembled sets include matched rocker arm
assemblies, rocker arm studs and valve oilers installed.
Single plug side only.
• Order original plumber style or O-ring style intake mani-
fold separately.
Full Heads with Year Intake
Assembled Valves
10-1065 10-1175 1948-54 Plumber Motor Shop Valve Service
10-1066 10-1957 1955-62 O-Ring View our exciting and Replacement
10-1455 1955-62 Front video of the Motor
Motor Shop Valve Shop. http://www.
Service and youtube.com/user/
Replacement TeddCycle
Panhead Rocker Arm

Panhead Rocker Assembly is complete with shafts and
blocks for Big Twin Panheads 1948-65. Note: Upper and lower
block set may have to be honed before final assembly for prop-
er arm fit. Sold each.
VT No. Item
11-0526 Rocker Arm Assembly, rear exhaust, front intake
11-0527 Rocker Arm Assembly, rear intake, front exhaust
11-0528 Rocker Arm only, rear exhaust, front intake
Rocker Arm Assembly 11-0529 Rocker Arm only, rear intake, front exhaust
Kit for 1948-65 Panhead 12-2114 Rocker arm stud 8-piece
includes all pieces to 9917-8 As Above Colony
completely assemble 12-0571 Stud nut 12-2114
the rocker arms on both 11-0530 Front oiler
heads. Includes four 11-0531 Rear oiler
rocker housings with 12-9912 Rocker dowel pin set
matching fitted rocker 12-1292 Head Plug 12-1292
arms, heat treated studs
and lock nuts, intake oiler
tubes and dowel pins.
VT No. 11-0480
506
42-0105
Panhead Cover
42-0104
42-0771
42-0130
42-0771 Replica
42-0029 Stainless Steel
Panhead Covers
Shown with
42-0029 D-Rings
D-Rings. Order proper screws separately.
VT No. Finish Style Replica Stainless Steel Panhead Valve Covers are produced
42-0104 Chrome Steel by New Tooling for exact fit and shape. Replaces 17500-48.
42-0758 Zinc Steel VT No. Finish
42-0105 Chrome Thick Alloy 42-0771 Stainless
CLASSIC
42-0029 Polished Thick Alloy 42-0901 Chrome Stainless
42-0130 Cast Thick Alloy
42-0103
Panhead Valve Cover Screws in hex
stock type, with built-in washer or allen
screw type. Long screws for thick alloy
D-rings. Short screws fit steel D-Rings.
VT No. Finish Fits D-Rings Type
8732-24 Chrome Alloy Hex
8733-24 Cadmium Alloy Hex
8736-24 Chrome Alloy Allen
8734-24 Chrome Steel Hex
8735-24 Cadmium Steel Hex
8737-24 Chrome Steel Allen 42-0639
9984-24 Chrome Washer Set Panhead Covers in sets for 1948-65 Big Twin.
9985-24 Cadmium Washer Set VT No. Finish Type Brand
¹⁄₄ x 20 Hex Thread Screws for Heads with stripped out 42-0103 Chrome Panhead Cover Set V-Twin
threads. Pack of 6. 42-0640 Chrome Panhead Cover Set Paughco
VT No. Finish Fits D Rings 42-0759 Polished Panhead Cover Set Paughco
2013-6 Chrome Alloy Aluminum
2014-6 Cadmium Alloy 42-0639 Chrome Ribbed Panhead Cover Set, Paughco
2015-6 Chrome Steel 2014-6
15-0114,
2016-6 Cadmium Steel 15-0345, 15-1005
15-1007
15-1079
15-0111 15-0347
15-0140
49-0789 49-0790
Forged Aluminum Billet Panhead Covers full finned design
for front and rear for use in custom frames with enough clear-
ance. 15-1244
VT No. Finish 15-1271
49-0789 Chrome
49-0790 Shot Peen Panhead Valve Cover Gasket.
Installed James VT No. OEM Item
42-0744 — 15-1416 17507-48 Felt
— 15-1545 17507-48 Felt
15-1079 15-0111 17507-48 Inner Felt, Thinner .07” 1948-65
— 15-0140 17507-48 Replica Inner Felt, Thick .15”, 48-65
— 15-0115 17541-48 Cover Gaskets, Thin
15-1005 15-0114 17541-48A Thick Composite
— 15-1544 17541-48A Paper, .062" composite
Panhead Fins are cast replicas. Panhead fins are to be used
15-1006 — 17541-48B Thick Cork
with thin D-Rings.
— 15-0347 Cork with metal
VT No. 42-0744
15-1007 15-0345 17541-48B Thin Graphite
15-1271 — 17541-48B Molded Rubber 507
— 15-1244 D-Ring and Felt Kit
Shovelhead Set
10-1063
11-0089
1966-77 O-Ring Type
10-1064
11-0082
V-Twin Mfg. Assembled Heads with cast iron guides, valve 1978-84 Rubber
stem seals, nitrated valves. Features a complete valve job for Band Type
maximum flow, horsepower and torque. Available for stock bore
application only. Head bolts not included. Max Lift is .405. Replica Shovelhead Head Sets are completely assembled
VT No. Fits Plug with unleaded valve seats, cast iron valve guides, nitrated
10-1063* 1966-77 Single valves, valve guide seals and stock type valve spring kit. Fits all
10-1064* 1978-84 Single 1966-84 Big Twins. Order stud set separately.
*Note: Assembled with chrome rocker box assembly. VT No. Item Year Type
11-0089 Head Set 1966-77 O-Ring
11-0082 Head Set 1978-84 Band
12-2106 Stud Set (One Head)
Chrome Engine Air Scoop will
force air to rear cylinder. Mounts
40-0203 to left side of Big Twin Shovelhead
1966-84. Brackets are included.
VT No. 42-0317
Head Bolt Kit
40-0235
8618-20
8777-20
Head Bolts, Head Nut and Washer Kits are accurately

machined from high strength steel and hardened to prevent
stretching. All bolts feature rolled threads for superior strength
and fit.
40-0237 Big Twin 1936-85 Overhead Valve.
Installed Cad Chrome Parkerized Fits
7825-20 8221-20 — 1948-84 Pan/Shovelhead
with washers
— 8777-20 — As Above Allen
— 7153-20 — As Above Acorn
— 8714-20* — 1948-84 Big Twin 74 and 80
Rocker Box Line Kit includes “T”. Chrome finish. Fits 1966-84 — — 8618-20* As Above, Black Oxide
Shovelhead. — 37-8831* — S.T.D. Heads Special
VT No. Finish OD Big Twin 74 and 80
40-0203 Chrome 3 mm With coarse thread
40-0235 Brass 6 mm *Note: Install these bolts with a ⁷⁄₁₆” 12 point box wrench.
40-0237 Chrome 6 mm Head Bolt Washer Kits
8170-10 8488-10 9704-10 For 1948-85 with ⁷⁄₁₆” bolts
508
Rocker Shaft End Cap Kit for
Shovelhead as replica type with hex
caps for left side.
Shovelhead Rocker
Box
2019-8
VT No. Year Finish Nut Type
2019-8 1966-84 Chrome Slot
2020-8 1966-84 Cadmium Slot
8222-8 1966-70 Chrome Slot
8223-8 1966-70 Cadmium Slot 11-0534
8224-8 1971-84 Chrome Allen
8224-8T 1971-84 Chrome Allen 11-0091
8225-8 1971-84 Cadmium Allen
Note: Features ¹⁄₂ - 20 thread to be used on later type rocker
shafts.
Chrome Allen Rocker Shaft
Plugs. Set of 4. Fit 1971-84
CLASSIC
FL-FX models. Includes sock-
ets and cups.
VT No. 37-0025
Rocker Box Covers are cast aluminum with polished or
7142-4 chrome finish. Order studs separately, per head.
VT No. Fits Type
11-0057 1966-84 Polished
11-0534 1966-84 Chrome
11-0091 1966-84 Polished
Chrome Rocker Shaft End Plugs add classic Knucklehead 12-2106 Studs 1966-84 Big Twin Stud Set for 1 head, V-Twin
look to any Shovelhead engine. Installation or removal is 12-2524 Studs 1966-84 Big Twin Stud Set for 1 head, Sifton
much easier than original slotted part. Packaged four per set.
VT No. Fits
7143-4 1966-70
7142-4 1971-84
7137-22 8449-22
8400-8
8730-8
8608-36 Rocker Shaft End Nut Kit includes four chrome acorn or
cap style nuts and washers for replacing “Red Dots” nuts on
Shovelhead Big Twin 1966-84, ⁷⁄₁₆ — 20 thread nut.
VT No. # Type Finish
8400-8 A Cap Chrome
8401-8 A Cap Cadmium
12-2106 8730-8 B Acorn Chrome
12-1193 B Washers 20 pack
Rocker Box Nut Kit is for 1966-84 Shovelhead in acorn or
cap which includes shaft nuts and washers. Factory type nut Rocker Shaft End Caps.
VT No. # Color Finish 12-8955
sets include washers.
VT No. Item Finish 12-0525 C Red Chrome
7137-22 Acorn Set Chrome 12-8955 Red Replica
8449-22 Cap Set Chrome 12-1966 Red Satin 12-0525
8608-36 Hex Nuts Chrome 12-0405 C Green Nickel
8609-36 Hex Nuts Cadmium 8614-4
12-2106 Stud Set for 1 head Zinc
Metal Backed Rocker Box
Gasket Set features beaded Rocker Shaft End Caps provide ease of installation,
sealing. ample clearance between gas tank and a custom touch for
VT No. 15-1526 Shovelhead 1971-85.
VT No. 8614-4
509
Shovelhead Top End Kit
Shovelhead Top End Kits include
• Prefitted cylinder set
• Late style assembled heads
• Cylinder base nuts
• Assembled rocker boxes in chrome or polished finish
• Rocker box studs and nuts
• Top end gasket set
VT No. Size Rocker Box Comp
11-0860 74” Polish 8.5:1
11-0861 74” Chrome 8.5:1
11-0862 80” Polish 8:1
11-0863 80” Chrome 8:1
11-0521
11-0577
Rocker Box Assembly for
1966-84 Shovelheads includes 11-0520
covers in chrome or polished
finish, four arms, four shafts Rocker Arms for 1966-84 Big Twin include bushings installed.
and chrome end shaft nuts. VT No. OEM Type
11-0577 Assembled. 11-0520 17360-66 Rear Exhaust, Front Intake
VT No. Finish 11-0521 17375-66 Front Exhaust Rear Intake
Rocker Arm
11-0577 Chrome
11-0578 Polished
11-0517
11-0570
14-0148 Rocker Arm Shaft for 1966-84 Big Twins.
Sifton Rocker Adjuster Kit stops top end clatter on all 1966- VT No. OEM Brand U/M
84 Shovelheads. Kit includes four steel spacers, four tempered 11-0570 17611-66A Sifton 4
pre-load spring washers and four no-leak rocker seals. No-leak 11-0519 17611-66A V-Twin Each
seals are machined of high grade nylon to replace O-Rings on 11-0539 As Above Jims Each
1966-84 Big Twin. Will not crack, melt or shrink. Sifton Rocker Arm and
VT No. Item Shaft Kit fits 1966-84
11-0517 Complete kit Shovelheads includes four
14-0148 No-leak seal sets rocker arms with bush-
Rocker Arm Shims fit 1966-84 Big Twin. ings installed, four shafts,
VT No. Size shims, spacers, chrome
12-0704 .005 replica end caps and nuts.
12-0710 .007 VT No. 11-0819
12-0715 .015
10-0700
10-2106
Rocker Arm Bushings replace 17428-57. Use on 1966-up Big
Twin models.
VT No. Type
10-0700 Stock Split
10-2106 One Piece Sifton
Jims Roller Rocker 4 Arm Set features greater strength in

Rocker Arm Spacer and Shims. critical areas, 660 Bronze bushings with a hardened steel roller
VT No. OEM # Model Item Qty tip. Use stock type rocker arm shafts. Fits Shovelhead 1966-84
12-2115 17452-66 A 66-84 Big Twin Spacer 4 pack 1.50 ratio. VT No. 11-0573
12-2122 17450-73 B 66-84 Big Twin Shim 10 pack
14-0501 11101 O-Ring 10 pack
510
Knucklehead Top End Parts.
VT No. OEM Year
7605-4 17465-36 1937-40
Item
Thrust Washer and Knucklehead
17482-36 Seal, Set of 4
12-0730 6475 1937-70 Brass Nut Washer Set
15-0574 469-15 Fiber Washer Set
49-1792 Brass Rocker Box Fitting Set
7705-4 17320-38 Drain Tube Fitting Set
8941-3 17325-42 Oil Feed Fitting Set
11-0558 17425-36 Rocker Arm Ball Stud Set
14-0172 17475-38 Oil Seal Set
11-0675 18050-36 Valve Seat
11-0575 18600-36 1936-40 Tappet Block Set
18610-36
14-0451 1936-40 Seal Kit with extension tubes
15-0924 Head Gasket Set
11-0540 17435-39 1938-47 Rocker Arm Shaft
11-0879 1936-37 Rocker Arm Shaft 12-0730
10-0992 1941-47 Aluminum Head Set
10-1640 1937-39 61" Heads
CLASSIC
49-0009 Brass Primer Cups 15-0574
7605-4
49-0037
11-0558
7110-8
11-0818
Nut Sets for Knucklehead
VT No. OEM Fits Finish 7705-4 8941-3
49-0037 Replica 1936-47 Chrome
7110-8 17447-36 Nut Set Chrome
11-0818 17447-36 Nut Set Parkerized
3189-4 Nut Set Chrome
3190-4 Nut Set Cadmium
3191-4 Nut Set Parkerized 11-0575
14-0172 11-0675
9622-16 8103-16 8102-16

Tappet Block Screw Sets for Knucklehead.
VT No. OEM Finish
9622-16 2329 Parkerized 14-0451 15-0924 49-0009
8103-16 2329 Cadmium
8102-16 2329 Chrome
Knucklehead Valve Train
Valve Spring Kit includes springs, col-
lars and keepers necessary for 1936-47 11-9641
61 and 74 Knucklehead 11-9643
VT No. 13-9192 Knucklehead Valves 1936-47
Valve Spring Kits include inner and outer Type OEM V-Twin V-Twin Kibblewhite
springs. Order collars and keepers sepa- Steel Nitrate Black
rately. Fit 1936-47 Knucklehead. Diamond™
Intake 18071-36 — 11-9641 11-6095
VT No. OEM Item Exhaust 18081-36 11-0613 11-9643 11-6096
13-9523 Sifton Spring Set, 8 piece Exhaust 1/8” O.S. — 11-9644 —
13-0792 Replica Spring Set, 8 piece Valves by Kibblewhite. Intake valves are made of 8645 heat
13-0427 Kibblewhite Spring Set, 8 piece 11-9623 treated valve steel and the exhaust valves are made of 21-2N
11-0647 18222-36 Lower Collar Set heat treated non-magnetic stainless steel.
11-0644 18221-36 Upper Collar Set
11-9623 18228-36 Valve Keeper
Rocker Arm Shaft Adjusting Tool for Knuck- Knucklehead Cast Iron Guides
leheads. Fits 1936-39. Intake Exhaust Size
VT No. 16-0001 11-0790 11-0791 Standard
11-1138 .002
V-Twin Knucklehead Parts Dope Reference 11-0790 11-1967 11-0791 11-1139 .003
Guide for 100% V-Twin restoration components 11-1140 .006
and Linkert tips for 1936-47 Knucklehead. Volume 11-1967 Set, Standard
#2. VT No. 48-1331 14-0452 Seal
511
Replica Knucklehead
49-2650
49-2601
49-0039
49-0011
49-1286
49-1307 49-0037
Replica Knucklehead Rocker Box Sets. See web for photos.
Year 1941-47 1942-47 1936-37 1936 10-1186 49-1286
49-1286 VT No. Item Year
Natural 49-2601 49-0011 49-1289 49-1307 10-1186 Cast Tab Set 1936-47
Polished 49-2650 49-0039 49-1293 49-1301 10-1187 Raw Rocker Arm Support Set, 1941-47
Nuts 49-0037 49-0037 49-0037 49-1387 11-0879 Arm Shaft Set 1936-37
Replica Knuckle-
Note “Baby Butt”
head Long Block
manifold is fitted to
comes complete
74” large port cylin- 10-1941 with Linkert brass
der heads, to accept for carburetor. Fits
a 3 bolt Linkert car- Motor 1936-1947.
buretor on the later
VT No. 10-1941
Knuckleheads.
Linkert Detail
Replica
Knucklehead
Motor is fitted
with V-Twin Mfg.’s
exclusive replica
exhaust system
VT No.
29-1115 produced with our
world exclusive
Every Part By V-Twin Mfg. tooling and fixtures.
512
11-0850
ReplicaTM Knucklehead
49-1310
Knucklehead
42-6174 Knucklehead Lower
Valve Spring Cup Sets
include parkerized 4
piece set of lower cov-
ers with oil lines and
nuts attached. Kit also
11-0891 11-0891 includes rocker cover
strip set with screws in
parkerized finish and
chrome or parkerized
cover set with gaskets.
42-3637 49-1319
11-0891
11-1285
V-Twin ReplicaTM Knucklehead Head Set feature original cast iron
CLASSIC
with black heat paint finish. Available as bare heads that have valve
VT No. Finish Year
seats installed only, assembled heads that have guides, springs, collars,
valves and parkerized lower tins installed and completely assembled 42-3637 Parkerized 1936-37
that includes an assembled head set with rocker arms, rocker boxes and 42-6174 Parkerized 1938-47
upper cover set installed with correct hardware All sets include intake 42-6175 Chrome 1938-47
manifold nipples installed. 49-1319 Line Set 1938-47
VT No. Fits Type 42-0863 42-0854
11-1285 1941-47 Bare Front Head Only
11-0850 1941-47 Assembled Head Set
11-0857 1941-47 Fully Assembled Head Set w/Parkerized Top Covers
11-0858 1941-47 Fully Assembled Head Set w/Chrome Top Covers
11-0891 1941-47 Fully Assembled Head Set w/Parkerized Top Covers
and 1936-39 type Rocker Boxes and Tins Knucklehead Rocker Parts. Order strip set with gaskets separately.
49-1310 1938-39 Bare Head Set VT No. Item Finish
49-1345 1938-39 Fully Assembled Head Set w/Correct Rocker Boxes 42-0863 Cover Set, Replica Chrome
49-1345A 1936-37 Bare Head Set 42-0854 Cover Set Parkerized
49-1347 1936-37 Fully Assembled Head Set w/Correct Rocker Boxes 7517-8 Cover Strip and Gasket Kit Zinc
7517-8T As Above, V-Twin
40-0239 42-0864 Cover Strip and Gasket Kit Parkerized
40-0247 42-0983 Cover Strip and Gasket Kit Chrome
40-0240 9848-9
15-0270 Cover Gaskets Only
37-0565 Cover Screw, 34 pieces Parkerized
2955-34 Cover fillister head slotted screw kit for 1938 61"
Top Oiler Line 1936-47 Knucklehead. 3023-34 Cover hex head screw kit Chrome
1936-41 is banjo type. 1942-47 is flared nut type in tin or chrome finish.
VT No. OEM Year Item Finish
3024-34 Cover hex head screw kit Cadmium
40-0240 3573-36 1936-41 Banjo line Tin 3025-34 Cover hex head screw kit Parkerized
40-0247 3573-36 1936-41 Banjo line Chrome 49-1791 Box Cap and Fitting Brass
40-0518 63578-36 1936-41 Banjo Bolt, each Cadmium 49-1793 Clip Parkerized
9848-9 Kit 1936-41 Banjo Nipple Kit Cadmium 49-1865 Washer
with banjo bolt and washer 49-1336 Seal Kit,1936-37
9847-9 Kit 1936-41 As Above Chrome 49-1866 Seal Graphite
14-0154 6440 1936-41 Washer for above, 10 pack
40-0112 63480-42 1942-47 Oil Line Chrome 7713-20
40-0239 63480-42 1942-47 Oil Line Tin
8941-3 17330-42 1941-47 Line Fittings Cadmium
17325-42 3 piece set
7349-3 As above Chrome
8630-1 33615-36 1936-41 Line Fitting Cadmium
For Timing Cover 9725-20
9738-1 33615-36 1936-41 As Above Chrome
9847-9 1936-41 Line Fitting Kit Chrome Head Bolt and Washers for 1936-47 OHV Knucklehead.
9848-9 1936-41 Line Fitting Kit Cadmium
Note: Nut type ends.
Parkerized Cad Chrome Fits
9725-20 7713-20 — 1936-39 with washers
1940-47 Knucklehead Oil Filter and
Bracket Kit includes oil filter assembly with — — 8456-20 As Above Cap Style
polished top and chrome canister body and 9726-20 7714-20 8220-20 1940-47 with washers
zinc plated mount bracket. Order oil lines and 2010-10 — — 1936-47 OHV, Washers only
fittings separately. 1941-47 Braided Top
VT No. Item
Oil Line
40-0564 Oil Filter Kit
40-0505 40-0370 Oil Line Set, Cadmium
VT No. 40-0197
40-0107 Oil Line Set Chrome 40-0197 Installed
40-0505 Fitting Set
513
Knucklehead Knucklehead Flywheel Assemblies. Trued, ready for installa-
tion. All parts brand new!
VT No. Year Type
10-1650 1936-40 61”
10-1070 1936-40 61”
10-1172 1941-52 61”
10-1007 1941-47 74” 10-1007
10-1112 1941-47 Stroker
Flywheel Sets Only
10-1601 1941-52 74” V-Twin
Pushrod Cover Kit for 1936- 10-1043 1936-40 61” TO
39 Knucklehead includes 10-1005 1941-53 74” TO
chrome lower tubes, clips, 10-1608 1936-40 61” TO
cups, and zinc inner tubes, Knucklehead Gift Set includes motor
complete with gaskets and model, key chain, lapel pin, belt buckle.
1936-99 Shown springs. VT No. 48-1375
Installed
Replica Pushrod Cover Kits are in chrome steel. 48-1375
VT No. Year Model
11-0904 1936-39 61”
Knucklehead Illustration Patch.
11-0897 1936 Only
VT No. 48-1163
11-0903 1940-47 61” and 74”
1936-47 48-1163
Tappet
Hex Rocker Mounting Kit includes
Block Kit
plated stock replacement bolts and
includes four washers used to mount rocker boxes
standard size on 1936-47 FL.
lifters with Chrome Cadmium Parkerized
adjusters and 8778-12 8779-12 9699-12
9699-12
zinc finish
tappet blocks. 11-0559
VT No.
11-0598
10-0782 Sifton Tappet Assembly for

Knucklehead feature centrif-
ugal surface fine grinding and
precision fit rollers and pins.
Solid units include adjuster 11-0879 Close Up
screws and lock nuts. Sold in 11-0879
set of four.
VT No. Size
10-0782 Standard
10-0783 .005
Replica Knucklehead Rocker Arm and Shaft Kit includes 4

forged steel rocker arms with ball studs installed and 4 matching
10-0510 shafts.
10-0647 11-0540
VT No. OEM Item
Tappet Assemblies for 1936-47 Knucklehead. 11-0559 Kit Arms and Shafts
Jims Eastern Item Knucklehead Rocker Shaft Set
10-0647 10-0510 Standard 18493-36 Exhaust VT No. Size Type Year
11-0540 Standard Sifton 1939-47
11-9525 11-0879 Sifton 1936-37
11-1303 11-0025 Rocker Arms
11-0522 Rocker Arm Support Set
Shaft End Nuts, left side
9840-8 Chrome 9842-8
9842-8 Parkerized
Solid Pushrods for Knucklehead.
Sifton Colony Year/Model
11-9525 7505-4 1941-47 74”
— 7518-4 1936-47 61”
11-1303 — Replica
514
Knucklehead
10-0945
10-0945 10-0945
31-0106 31-0107 31-9006

Knucklehead Engine Mount fits 61 and 71 Overhead Oiler
Big Twins.
VT No. Years Finish
31-0106 1938-47 Chrome
31-0107 1938-47 Black Oxide 10-0104 10-0945
31-9006 1936-37 Black Oxide
CLASSIC
2649-9 Bolts Parkerized
2648-9 Bolts Cadmium
31-0735
Top Engine Mount for Knucklehead. Raw finish.
VT No. 31-0735 49-0946
Front Engine Mount Nut replaces 24797-36 on
1936-up Big Twins. Includes lock tab pressed in
place.
VT No. 37-9066
10-0825
8165-19 9627-19 10-0942

Upper and Lower for 1936-69 Big Twin.
VT No. Year Finish
8164-19 1936-69 Chrome
8165-19 1936-69 Cadmium
9627-19 1936-69 Parkerized
9627-19T 1936-69 Zinc
8127-34 8128-34
Engine Case Bolt Kit includes the necessary hardware to bolt

together the engine cases of the years listed. Available as OEM
stock in chrome, cadmium or acorn in chrome. Knucklehead 1941-47 Left Hand Case and Case Set fea-
Acorn Chrome Cadmium Fits tures steel bearing insert cast in. Left hand case is machined
8127-34 8128-34 8129-34 1936-39 OHV Big Twin to fit OE right side case. Order cylinder base studs and case
8130-34 8131-34 8132-34 1940-47 OHV Big Twin race separately. Note: Cylinder deck height must be finished to
match your case.
VT No. Item Year
10-0945 Set FL 1941-47
10-0104 Set 1941-47
49-0946 Case Left 74” 1941-47
60-0258 Matching Machine Service
10-1758 Right Side 1941-47
10-0825 Left, 61” 1936-40
10-0942 Set, 61” 1936-38
10-0942 515
Valve Guide
11-0705 11-1166 11-0743 11-2300 11-2308
11-0951 11-2126
Big Twin 1948-78
Size V-Twin Kibblewhite Kibblewhite Kibblewhite Kibblewhite Rowe Unhoned Cast Iron Rowe Iron
Bronzonium Ampco 45 Tru-Bore
Cast Iron Machine Manganese Bronze Valve Guides Guide inner
Cast Iron Intake and Exhaust Guide diameter.
is the same unless noted. Honed
Intake Exhaust Intake Exhaust Intake Intake Exhaust Intake Exhaust Shovelhead Shovelhead 1948-79
Circlip Flange Machined
Type Type to accept
Late .060 guide seal
1979-84 Shorter (by V-Twin)
Standard 11-0705 11-1166 11-1167 11-2300 11-2308 11-1164 11-1165 11-9631
+.001 11-0691 11-0967 11-0975 11-2301 11-2309 11-0951 11-0959 11-2119 11-9632
+.002 11-0706 11-0968 11-0976 11-2302 11-2310 11-0952 11-0960 11-2122 11-9633
+.003 11-0688 11-0969 11-0977 11-2303 11-2311 11-0953 11-0961 11-2125
+.004 11-0707 11-0970 11-0978 11-2304 11-2312 11-0954 11-2126
+.006 11-0703 11-0708 11-0971 11-0979 11-0743 11-2305 11-2313 11-0955 11-0963 11-2131 11-9635
+.008 11-0704 11-0972 11-0980 11-2306 11-2314 11-0956 11-0964 11-2134 11-9636
+.010 11-0973 11-0981 11-2307 11-2315 11-0957 11-0965
Top Dia .625 .531 .562
Seal# 14-0146 14-0145
Overall 1.98 1.940
Length
11-0982 11-0996
Late Shovelhead 1979-84

Size Kibblewhite Kibblewhite Kibblewhite V-Twin Rowe Rowe
Machine Machine Manganese Cast Iron Cast Ampco
Ampco 45 Cast Iron Bronze Iron 45
Intake Exhaust Intake Exhaust Intake Exhaust Intake 11-1883
Standard 11-0982 11-0989 11-0996 11-1003 11-2326 11-2331 11-0714
+.001 11-0983 11-0990 11-0997 11-1004 11-2327 11-2332
+.002 11-0984 11-0991 11-0998 11-1005 11-2328 11-2333 11-0695
+.003 11-0985 11-0999 11-1006 11-2324 11-9795
+.004 11-0993 11-1000 11-1007 11-2329 11-2334 11-1886
+.006 11-0987 11-0994 11-1001 11-1008 11-2330 11-2335
+.008 11-1002 11-1009
Rowe Patch.
VT No. 48-1523
48-1523
Watch Our Video!
user/TeddCycle Welcome to Motor Shop
Guides to accept seals on 1981-85 Shovelhead standard size
with replica valves. Requires I.D. to be fitted to valve for proper Big Twin 1979-80 Valve Guide Retaining
clearance. Ring. Replaces 18105-79. VT No. 12-0936
Guide Type Valve Seals
11-1168 Exhaust 11-1135 14-0145
11-1169 Intake 11-1136 14-0145 Overhead Valve Guide Gasket.
Collar Type VT No. OEM Years
11-0648 Upper 15-0297 18265-37 1936-47
11-0666 Lower 15-0210 18196-51 1948-85
11-0513 Keeper
516
Valve Spring Kit
Valve Keeper Keys are packaged and sold in
four pairs per package enough for one engine.
Fits 1936-85 Big Twin. Keys are split type.
VT No. OEM Brand
13-9195 11-0513 18228-36 V-Twin
11-9616 18228-36 Manley
Valve Spring Kits include all springs, collars and keepers nec- 11-9623 18228-36 Sifton
essary for each application.
VT No. Year Model
13-9193 1948-79 Pan-Shovelhead
13-9194 1980-81 Shovelhead 11-0515 11-0644
13-9195 1981-84 Shovelhead Big Twin
13-0169
11-0516 11-0666
CLASSIC
11-0648 11-0712
Steel Valve Collars 61, 74 and 80 Big Twin.
VT No. OEM Use Year
1948-84 Pan-Shovelhead Valve Spring Sets include inner 11-0515 18222-48 Lower 1948-79
and outer. 11-0644 18221-36 Upper 1936-80
VT No. Fits Replaces 11-0516 18222-79 Lower 1980-Early 81
13-0169 1948-84 18201-57B/18204-36A 11-0666 18222-81 Lower 1981-84
13-0179 1966-84 18201-82/18202-82 11-0648 18219-81 Upper 1981-84
11-0712 18219-81 Upper 1981-84
11-1153 Sifton Upper 1981-84
1948-79 Lower Collar Seal Set includes
four seals (VT No. 14-0145) to use with
stock style guides.
VT No. 11-0874
Andrews Valve Gear for 1966-84 Shovelhead 74 and 80.
VT No. Fits
11-9877 Upper Collar, T-6 Aluminum for 16-0403 16-0404
.600 lift, 4 piece set
11-9878 Upper Collar, T-6 Aluminum, adds
.060” spring travel and is for medium lift
13-9250 Hi-Lift Spring Set
Valve Stem Oil Seal Kits include four pieces of proper guide
seal and installation tool.
VT No. Year
16-0403 1948-79
16-0404 1980-84
Valve Guide Seal
Sifton Valve Stem Seal features a Viton seal with double

coil spring for tension, and steel band to secure to guide. Fits Valve Stem Seals in 10 packs for years listed. Installation tools
1948-84 Shovelhead. and plastic 10 pack sleeves available separately.
VT No. 14-0973 VT No. Fits Mfg. No.
Sifton Veloprene Coated Valve Stem 14-0145 Big Twin 1948-78 1408
Seal Set for Big Twin provide maximum 14-0146 Big Twin 1979-84 1427
valve stem oil control as seals wipe excess 14-0982 Big Twin 1948-78 Sifton
oil from the valve stem by means of a 14-0375 Big Twin 1979-84 Sifton
unique spring loaded wiper assembly 16-1753 Sleeve ³⁄₈”
which prevents unwanted oil from reaching Installation Tools
and contaminating the cylinder. Machining 16-0133 1948-79 Big Twin Black
required. Fits 1948-84. 16-0134 1981-83 Big Twin White
VT No. 14-0259 Note: 14-0164 is ⁵⁄₁₆, 14-0145 and 14-0146 are ³⁄₈.
517
Valve Spring FL-FX Upper Collar for fitment of the
double matched springs, color coded,
for stock valve stem diameters, fits1941-
13-2110 Kibblewhite Lightweight Valve Spring 84 Big Twin models, in set of 4.
Kits include springs, keepers, retainer, Red Collars used most often by combining ease of installation
and lower collars unless noted. and good spring pressure, which will accommodate most cams.
Allows spring to sit .080 higher than green collars.
VT No. 11-9621
Sifton Valve Spring Kits feature
four double matched competition
74” and 80” Shovelhead, 1966-84 springs. Fits 1941-84 FX-FL, order
VT No. Type top colored collars separately from
13-2110 Has 160 lb seat pressure, up to .600” valve travel.
Hard-anodized aluminum retainers. Uses stock this page. Mfg# 3030.
lower collars. VT No. 11-9618
13-2115 Has 160 lb seat pressure up to .600” valve travel. Valve and Spring Kit by Sifton
Titanium retainers. Uses stock lower collars. for Shovelheads includes two
intake and two exhaust valves
with nitrated finish, complete
spring set and keepers with
upper and lower collars. Four
piece valve set available sepa-
Kibblewhite Valve Spring Retainers and Keeper Sets. Keepers
rately.
are CNC machined and then heat treated.
VT No. Year Item
Keeper Set
11-2021 Pan/Shovelhead 11-0794 1966-79 Kit
Upper Retainer Sets 11-0795 1980-81 Kit
11-2020 Pan/Shovel Titanium Offset 0.70” to allow more 11-0796 1982-84 Kit
installed spring height. 11-0679 1966-84 Valve Set
11-4248 Pan/Shovel aluminumoffset 0.70” to allow more Sifton Valve Keepers. 1941-84 FL-FX steel
installed spring height. valve keepers fit stock ³⁄₈” valve stems. Sold in
11-2022 Lower collar set. Pan/Shovelhead machined to work sets of four.
with .562” diameter guide seals and counter VT No. 11-9623
Bored for added clearance.
Kibblewhite Big Twin Valve Spring
Set for high lift cams can be used with
stock retainers and lower collars for up
to .600” lift. Fits 1948-84. S&S Valve Spring Kits Pan-Shovelhead 1948-84 Big Twin to
VT No. 13-2000 be used with stock style guides and lower spring collars, stock
Valve Spring ³⁄₈f” diameter valves, and stock keepers. By grinding .060 to
.090 off the tops of the valve guides cams with lifts up to .550”
may be used. Kit includes four aluminum top collars and four
of each inner and outer springs. VT No. 13-9226
Manley 1948-79 Valve Spring Kits 74 and 80 FL-FX .495 Lift Kits
except Evo
Collars Combined Coil Recommended 11-1472
VT No. Top Loads Bind Cam Lift
11-9229 Titanium 140 @ 1.480 .950 Stock-.500”
300 @ 1.000
The above “.495” lift kits do not require cylinder head machining for
installation. These kits are supplied with lower collars that allow addi-
tional spring travel as compared to stock collar and provides these kits
the ability to accept camshafts up to .495” lift. Note: 11-9229 is for stock
stem diameter valves
Manley Valve Kits.
74 and 80 FL-FX .500”-.600” Lift Kit except Evo
Combined Coil Recommended
11-1469
VT No. Loads Bind Cam Lift
11-9612 180 @ 1.600 .930 .500-.600
320 @ 1.100
360 @ 1.000 11-1470
The above kit features tri-spring (outer-intermediate-inner) interference fit to
reduce harmonics and control spring surge. Additional machining is required Kibblewhite Stock Replacement Style Valve Spring and
to lower the height of the valve guide to avoid interference with the top collar.
Springs have more pressure than stock but can be used with .500” lift or .600” lift Collars for stock lift cams.
cams. Includes titanium top collars. Fits 1948-65
74 and 80 FL-FX .465” Lift Kit except Evo Spring Kit Upper Collar Lower Collar Keepers
Combined Coil Recommended
11-1469 11-1472 11-1475 11-1478
11-9613 150 @ 1.450 .950 Stock .465 11-1470 11-1473 11-1476 11-1479
300 @ 1.000 11-1471 11-1474 11-1477 11-1480
The above kit does not require machining for installation. However, do not exceed
.465 lift due to the potentially high stress on the springs. The springs are interfer-
ence fit to help the harmonics. Supplied with steel top collars. Use with stock stem
diameter valves only.
518
Nitrate Steel Steel Chrome Steel Stainless Nitrate Steel
Replica Valves
Sifton V-TwinTM
Model and Year Type OEM Nitrate Steel NitrateChrome Stainless Stainless
Steel Steel Steel Nitrate Steel
Steel
Shovelhead Intake 18075-81 11-1136 11-0845 11-1132
1966-83 Exhaust 18086-81 11-1135 11-0846 11-1133
Intake 18071-48 11-0624 11-9659
Panhead Exhaust 18082-57 11-1120 11-0661 11-0614 11-0632 11-9656
1948-65 Intake ¹⁄₈” Oversize 11-9645
Exhaust ¹⁄₈” Oversize 11-0615
Intake 18074-66 11-1119 11-0664 11-0605 11-0630 11-0625
Shovelhead Intake ¹⁄₁₆” Oversize 11-9295 11-0606
1966-85 Exhaust 18082-57 11-1120 11-0661 11-0614 11-0632 11-9656
CLASSIC
Exhaust ¹⁄₈” Oversize 11-0615
Shovelhead Crane Chrome Intake 18074-66 11-2000
KIBBLEWHITE Valves by Precision Machining (Kibblewhite). Intake valves

are made of 8645 heat treated valve steel and the exhaust
Model Application Stainless valves are made of 21-2N heat treated non-magnetic stain-
and Black Racing Razor less steel. These valves are available with the following
Year DiamondTM (3) Black (1) (2) stems and heads:
Intake (1) Racing by Kibblewhite Precision Machining feature
Panhead 18071-48 11-6000 — — a sharper profile angle to maximize flow, 11-6015 has
1948-1965 Exhaust 11-6007 — — 2.00 head, 11-6016 has 1.812 head, 11-6017 has
Intake 1.780 head.
18074-66 11-6001 — — (2) Razor Back by Kibblewhite are one piece forged
Shovelhead 1/16” O.S. — 11-6015 — EV-8 stainless steel, fully CNC machined with hard
1966 Exhaust chrome stems.
and 18086-81 11-6007 11-6017 11-6085 (3) Black Diamond: One piece stainless steel valve with
Later 5/32” O.S. — 11-6016 — a stellite tip and black nitrone impregnated stem to
Exhaust improve wear properties and reduce friction.
Shovelhead 18086-81 11-6089 — —
Intake
1981-84 18075-81 11-6090 — —
Manley Stainless Valve machined from

Valve Seat
1-piece forging with a swirl polished finish
and chrome plated stem. Sold pairs.
Shovelhead 1966-85
VT No. Type Head Dia. Stem Dia. OEM
11-9012 Intake 1¹⁵⁄₁₆ stock .3765 stock 18074-66
11-9013 Ni Intake 1¹⁵⁄₁₆ stock .3765 stock 18074-66
11-9011 Exhaust 1³⁄₄ stock . 3745 stock 18082-57 11-0641
11-9014 Ni Exhaust 1³⁄₄ stock .3745 stock 18082-57 Stock Replacement Valve Seats for Big Twin models.
Panhead 1948-65
VT No. OEM Fits Type
VT No. Type Head Dia. Stem Diameter OEM
11-0651 18018-66 Intake 1966-84 Nickel
11-9028 Intake 1³⁄₄ stock .3765 stock 18074-48
11-0653 18017-66 Exhaust 1966-84 Nickel
11-9011 Exhaust 1³⁄₄ stock .3745 stock 18082-57
11-0675 18050-36 Intake and Exhaust Nickel
Note: Ni is Nitrate finish.
Chromoly Valve Keys (Set of 8) for Pan/Shovelhead 1948-81. 1936-47 Knucklehead
VT No. 11-9614 Note: For use with unleaded or leaded gasoline.
Oversize Valve Seats can be used with unleaded gas.
Replacement size is actual size of seat supplied by
V-Twin Number. Stock size is noted as reference only.
Intake
VT No. Fits Stock Size
Manley’s “Street Master” intake and exhaust valves feature 11-0641 1948-65 1.940 x 1.562 x .400
stainless steel construction, chrome plated stems, hard tips, Replacement Size 2.016 x 1.635 x .453
smooth turned underhead angle and radius, forged combustion 11-0670 1966-84 2.132 x 1.752 x .400
dish and machined combustion face rim. Replacement Size 2.164 x 1.750 x .453
VT No. Type Head Dia. Stem Dia. OEM Exhaust
Shovelhead 1966-85
11-0641 1948-65 1.940 x 1.562 x .400
11-9020 Intake 1¹⁵⁄₁₆” stock .3765 stock 18074-66
Replacement Size 2.016 x 1.635 x .453
11-9021 Exhaust 1³⁄₄” stock .3745 stock 18082-57
519
Pan-Shovelhead Cylinder and Piston Kit
Over 50,000 Pieces Served Since 1978!
VT No. OEM Type Replacement Cylinders Only
1948-52 74” for stock bore, stock stroke
11-1283 — Front and compression. Must be
11-1284 — Rear honed to standard size for
11-2603 1948-65 Panhead 74” proper fit. Sold each without
11-0502 16485-48 Front piston.
11-0503 16494-48 Rear
1966-78 Shovelhead 74”
11-0500 16484-66 Front
11-0501 16492-66 Rear
1979-85 80”
11-0496 16498-80A Front
11-0497 16499-80A Rear
11-0481 GME Front
11-0474 GME Rear
Note: The use of Colony 12 point head bolts 8714-20 chrome
or 8618-20 black and cylinder base nuts 8600-8 in chrome or
8601-8 in black will allow extra clearance for tightening when
necessary on 1948-84 Big Twin cylinders.
11-0885 S&S Cast Iron Cylinders
for Shovelheads are stock
length and include base
nuts, head bolts, head and
base gaskets.
VT No. Size Fits
11-0062 3⁷⁄₁₆” 1966-78 74”
11-0063 3¹⁄₂” 1978-84 80”
Shovelhead 3⁵⁄₈” Big Bore Metal Cylinder Base Gasket has

a steel base metal which has been coated on both sides with a
specially formulated high temperature oil resistant rubber com-
pound. Silicone beading around the inner and outer perimeter
forms a seal on both sides of gasket. Sold in pairs.
V-Twin James Fits
— 15-1123 .032” thick
15-1532 15-1122 .020” thick
Big Twin Cylinder Base Studs
11-0885 feature heat treating and interfer-
ence thread at cylinder base. Sets
of eight.
VT No. OEM Fits
12-2100 8856-8 16831-30 1930-77
12-2100 16831-30 1930-77
8857-8 16837-78 1977-84
Cylinder and Piston Kits are honed and pre-fitted with 8.5:1 Cylinder Base Nut
Big Twin 1936-85 Cylinder Base Nuts and Washers, 8 piece sets.
7017-16
stock compression pistons and Hastings rings. They are ready

VT No. # Year Finish Style
to run and require break-in as suggested in the appropriate 7017-16 A 1936-77 Chrome Acorn
shop manual. Sold in pairs for stock stroke only. Order gasket 7813-8 B 1978-84 Chrome Milled Hex Acorn
set separately. 8600-8 C 1966-84 Chrome Big Bore
VT No. Years Compression Ratio Piston 8601-8 C 1966-84 Black Oxide Big Bore
8437-16 D 1936-77 Chrome Cap
Panhead 74” 8474-8 E 1978-84 Chrome Milled Hex Cap 7813-8
11-0885 1948-52 8.5:1 Cast 8104-16 F 1936-78 Chrome Hex
11-2602 1948-65 8.5:1 Cast 8105-16 F As above Cadmium Hex
8105-16T F As above Cadmium Hex
Shovelhead 74” 9623-16 F As above Parkerized Hex
11-2603 1966-78 8.5:1 Cast 9100-8 G 1978-84 80” Shovel Chrome Hex 8104-16
Shovelhead 80”1979-85 9101-8 G As above Cadmium Hex
11-2604 Replica 8:1 Cast 9102-8 G As above Black Oxide Hex
A B C D
8860-8 H Cylinder Base Spacer Chrome
11-2612 GME 8:1 Cast 1978-84 Shovelhead
11-2613 GME/Wiseco 9.5:1 Forged 8861-8 H As Above Black F G
11-2614 GME/Wiseco 7:1 Forged 9715-8 I ⁷⁄₁₆” Lockwashers Chrome
8171-8 I ⁷⁄₁₆” Lockwashers Cadmium E
9716-8 I ⁷⁄₁₆” Lockwashers Parkerized I H
520
Knucklehead
Cylinder Kit
11-0506
11-2601
Knucklehead Replacement Cylinder and Piston Kits are

honed and pre-fitted with stock compression cast pistons and
Hastings Rings. They are ready to run and will require break-in
Replica Knucklehead Cylinder Sets
as suggested in the appropriate shop manual. Sold in pairs for
feature iron cast construction, original
CLASSIC
stock stroke only. Order gasket set separately.
markings with black painted finish and
VT No. Year Fits Compression
are pre-fitted with cast pistons and
11-2600 1936-47 61” 7.5:1
Hastings rings.
11-2601 1941-47 74” 8.5:1
VT No. Year Fits Compression
Knucklehead Replacement Cylinders Only for stock
11-0506 1936-47 61” 7.5:1
11-0506 bore, stock stroke and compression. Must be honed to
11-0507 1941-47 74” 8.5:1
standard size for proper fit. Sold each without piston.
Replica Details! VT No. OEM Type Year Fits
11-0495 16483-36 Front 1936-47 61”
11-0494 16490-36 Rear 1936-47 61”
11-0499 16483-41 Front 1941-47 74”
11-0499
11-0498 16491-41 Rear 1941-47 74”
3⁵₈” Shovel Cylinders

Big Bore Gasket Kit fits all 3⁵⁄₈” cylin-
15-0877 11-0297
ders. Kit includes two veloprene coat-
ed gaskets and 2 base gaskets.
GB James Fits
15-0886 15-0886 15-0599 Shovelhead
— 15-0877 Evo
Metal Cylinder Base Gasket has a steel base
metal which has been coated on both sides with a
specially formulated high temperature oil resistant
rubber compound. Silicone beading around the inner
and outer perimeter forms a seal on both sides of 11-0380
gasket, pairs. (Shovelhead 3⁵⁄₈” Big Bore .020 Thick)
VT No. 15-1122
11-0510
8618-20
8601-8
3⁵⁄₈” Cylinders sold as a kit with 7.5:1 pistons, rings, gaskets,
head bolts and cylinder base nuts. Also available as cylinder
Magnum Cylinder Small Parts Kit for installing 3⁵⁄₈” barrels set only. Requires case boring and installation.
on Shovelhead cases. Includes two (2) head gaskets, one Stock Cylinder
each front and rear cylinder base gasket, eight (8) cylinder VT No. Item Brand
base nuts, and ten (10) head bolts with washers. 11-0380* Cylinder Set, Sifton Note: Honed to size
VT No. Item 11-0297 Cylinder Kit Sifton
11-0510 Complete kit 11-0283 Piston Kit
11-0252 Rings Set
15-0599 Gasket set
.200 Longer Cylinder
8618-20 Black bolt set VT No. Item Brand
8714-20 Chrome bolt set 11-0385* Cylinder Set, Sifton Note: Honed to size
8600-8 Chrome base nuts 11-0289 Cylinder Kit Sifton
8601-8 Black base nuts *Note: Order pistons separately.
521
Replica Piston Kit
V-Twin Piston Kits include two cast alloy pistons, genuine Hastings three piece ring set, two wrist pins and four circlips. All Big
Twin pistons have a steel expansion control strut cast as original.
61-74-80 Overhead Valve Piston Set use 22588-78 Pin Lock, VT No. 12-0929.
COMP STD STD LOW HIGH 10:1 8.5:1 STD 8:1 LOW 7:1
Dia. 7.0:1 8.5:1 7.5:1 74” 74” Stroker 80” 1340cc 80” 1340cc
61” OHV 74” 74” 1200cc 3⁷⁄₁₆” Bore 3¹⁄₂” Bore 3¹⁄₂” Bore 11-0848
3⁵⁄₁₆” Bore 1200cc 1200cc 3⁷⁄₁₆” Bore (S&S)
3⁷⁄₁₆” 3⁷⁄₁₆”
Bore Bore
STD 11-0426 11-0216 11-0307 11-0322 11-0455 11-0226 11-0317
.010 11-0847 11-0217 11-0308 11-0323 — 11-0227 11-0318
.020 11-0427 11-0218 — 11-0324 — 11-0228 11-0319
.030 11-0848 11-0219 11-0310 11-0325 — 11-0229 11-0320 11-0427
.040 11-0428 11-0220 11-0311 — — 11-0230 11-0321
.050 — 11-0221 11-0312 — — Shovelhead Shovelhead
.060 11-0429 11-0222 11-0313 — — — —
.070 — 11-0223 11-0314 — — — —
.080 11-0439 — — — — — — 11-0463
COMP 8.5:1
Stroker Piston
8.25:1 8.25:1 (S&S) 7.5:1 (S&S) 7.5:1
4¹⁄₂” Stroker 4⁵⁄₈” Stroker 4⁵⁄₈”Stroker 4¹⁄₂” Stroker 4¹⁄₂” Stroker
Dia. 3⁷⁄₁₆” Bore 3¹⁄₂” Bore 3⁷⁄₁₆” Bore 3⁵⁄₈” Big Bore 3⁵⁄₈” Big Bore
STD 11-0288 11-0461 11-0455 11-0237 11-0283
.010 — — — — 11-0238
.020 — 11-0463 — — —
.060 — — 11-0461 — —
Over 100,000 Kits Served since 1976!
Ring Set
Wrist Pin and Lock Kit replaces 22760-73.
1948-85
VT No. 11-0870
Wrist Pin Locks. 10 packs.
Hastings VT No. Year
Hastings Piston Ring Sets are replacements for Patch. 12-0910 12-0911 12-0929 12-0910 1932-53
OEM ring sets. 61” and 74” FLH type will fit V-Twin 12-0911 1952-77
Pistons. 74” FL type to fit OEM Pistons only. Also fit VT No. 48-1479
any of our cast pistons. Include cast compression 3⁵⁄₈” Big Bore Shovelhead 12-0929 1978-82
rings and a 3-piece oil ring. Except where noted. ⁵⁄₆₄” Compression Ring
Sold in sets for two pistons. Mfg.# 2M5722 One Piece V-Twin Cast Iron
Moly Ring Sets for 2 pistons with one
Model 61” 74” FL 74” Moly
Size OHV 3⁷⁄₁₆” FLH STD 11-0196 piece oil ring.
Bore 3⁵⁄₁₆” ³⁄₃₂” 3⁷⁄₁₆” .010 11-0197 Dia. 1200cc 1340cc
Comp ³⁄₃₂” ³⁄₁₆” ¹⁄₁₆” .020 11-0198 FLH 37/16” 31/2” Bore
Ring ³⁄₁₆” ³⁄₁₆” .030 — Bore 74” 80”
Oil STD — 11-2508
Ring 3⁵⁄₈” Big Bore Shovelhead
Mfg.# 6627 5193 6482 2M6482 ¹⁄₁₆” Compression Ring .010 11-2501 11-2509
STD 11-0170 11-0117 11-0176 11-1368 Mfg.# 2M5721 .020 11-2502 11-2510
.010 11-1404 11-0118 11-0177 11-1369 Moly .030 11-2503 11-2511
.020 11-0171 11-0119 11-0178 11-1370 STD 11-0252 .040 11-2504 11-2512
.030 11-1405 11-0120 11-0179 11-1371 .050 11-2505 —
.010 11-0253
.040 11-0172 11-0121 11-0180 11-1372 .060 11-2506 —
.050 — 11-0122 11-0181 11-1373 .020 11-0254 .070 11-2507 —
.060 11-0173 11-0123 11-0182 11-1374 .030 11-0255
.070 — — 11-0183 11-1375
.080 11-1681 — 11-0184 11-1376 FLH Piston Ring
Note: Features One Piece Oil Control Ring. Three Piece Set fea-
80” FL-FX Shovelhead 1340cc tures compression
Mfg. # 6127 2M6127 rings with a size of ¹⁄₁₆”
Cast Moly and oil rings with the
STD 11-0185 11-1363 — —
.010 11-0186 11-1364 — — size of ³/₁₆”.
.020 11-0187 11-1365 — — VT No. Size
.030 11-0188 11-1366 — — 11-1207 74”
.040 11-0189 11-1367 — — 11-0134 80”
522
Piston Kit
11-0267
11-9725
11-0273
Note: Piston Kits include Hastings X Ring.

Note: Rings are packaged per piston.
1948-78 1200/74” FL-FLH 9:1 Compression 3⁷⁄₁₆” Bore.
Piston Kit Wiseco Rings MC Moly Coated Piston Kits feature cast construction with
Standard 11-9725 moly (moS2) coating which helps reduce friction and wear,
.010 11-9726 11-9754 while allowing adequate break in. Hastings Moly Rings Set,
CLASSIC
.020 11-9727 11-9755 wrist pins and locks included. 8.5:1 comp ratio.
.030 11-9728
.040 11-9729
Size 3⁷⁄₁₆” 74” 3¹⁄₂” 80”
.050 11-9730 11-9758 1948-84 Rings 1978-84 Rings
.060 11-9731 11-9759 FLH-FX FLH-FXE
.080 11-9732 11-9760 Standard 11-0267 11-1368 11-0273 11-1363
1978-84 1340/80” Shovelhead 7:1 Compression 3¹⁄₂” Bore. .010 11-0268 11-1369 11-0274 11-1364
Piston Kit Wiseco Rings .020 11-1370 11-0275 11-1365
Standard 11-9733 11-9759
.020 11-9735 11-9760 .030 11-1371 11-1366
.030 11-9736 11-9764 .040 11-0271 11-1372 11-0277 11-1367
.040 11-9737 11-9765 .050 11-0272 11-1373 — —
1978-84 1340/80” Shovelhead 8.5:1 Compression 3¹⁄₂” Bore.
Piston Kit Wiseco Rings Forged Piston Kits
STD
.010
11-9444
—
11-9759
11-9762 KB PERFORMANCE PISTONS
.020 11-9446 11-9760
.030 11-9447 11-9764
.040 — 11-9765
11-2204
1978-84 1340/80” Shovelhead 9.5:1 Compression 3¹⁄₂” Bore.
Piston Kit Wiseco Rings
STD 11-9738 11-9759
.010 11-9739 11-9762
.020 11-9740 11-9760
.030 11-9741 11-9764
.040 11-9742 11-9765
Wiseco Replacement Wrist Pins are sold each.

VT No. Bore Size
11-9776 3³⁄₁₆” and 3⁷⁄₁₆” The Keith Black 390 Hypereutectic alloy is cast in a per-
11-9777 3¹⁄₂” manent steel mold.
Wiseco Replacement Circlips fit all Wiseco pistons, Engine Panhead 1340cc 1340cc
Shovelhead Shovelhead Shovelhead
available in pairs. Fits 3⁷⁄₁₆” and 3¹⁄₂” bore pistons.
Model FLH-FX FLH-FX FLH-FX
VT No. 11-9773
Years 1941-79 1980-84 1980-84
C.I.D. 74” 80” 80”
Bore 3.438” 3.498” 3.498”
Stroke 3.969” 4.250” 4.250”
Head Type .656 Dome .426 Dome
Cylinder Height 5.330” 5.330” 5.330”
Compression 9.0:1 7.2:1 8.3:1
Ratio
SHOP TIP Piston Installation
Standard 11-2200 — 11-2251
Caution: Do not install piston pin without lubricating it first with motor oil or assembly lube.
Touch up outer edges of piston pins with emery cloth before installation.
.005 11-2201 11-2235 11-2252
1. Refer to applicable service manual for proper installation methods. .010 11-2202 11-2236 11-2253
2. Piston should be measured front-to-rear at the base of piston skirt, perpendicular to wrist
pin. .020 11-2203 11-2237 11-2254
3. Piston should be set-up with the following tolerances:
Recommended piston/cylinder running clearances: .030 11-2204 — 11-2255
Minimum Maximum Preferred
Evolution® Models .0015 .0022 .002 .040 11-2205 — 11-2256
(Aluminum Cylinders)
Big Twin Models .0015 .003 .0025
.050 11-2206 — —
(Cast Iron Cylinders) .060 11-2207 — —
Sportster Models .003 .004 .0035
(Cast Iron Cylinders) .070 11-2208 — —
Specifications for ring end-gap are supplied with the ring sets and vary by type and size.
Note: Run engine at moderate speeds for at least 500 miles, avoiding excessive running in .080 11-2209 — —
lower gears, in order to properly break-in new pistons and rings.
523
Knucklehead Gasket
Replica Gasket OE Quality Since 1967
15-0530
15-0526
15-0758
15-0711 15-0507
15-0800
Complete Gasket Kit for Knuckleheads.
VT No. Type Year Brand
15-0820 15-0758 Replica 1937-40 GB
15-0530 Replica 1941-47 GB
15-0507 Standard 1941-47 GB
15-0800 Standard 1941-47 James
Knucklehead Head Gaskets. Made of
copper. Fit 1936-47.
VT No. 15-0268
Knucklehead Top End Gasket Set fea-

tures copper head gaskets and cylinder
base gaskets with bead on metal.
VT No. 15-0924
GBTM Top End Kits include all gaskets and O-rings including
pushrod corks from the cylinder base and up. Perfect for piston
and valve jobs.
Fits Big Twin Overhead Valve
VT No. OEM Years Model 15-1290 15-0412
15-0711 17034-38 1941-47 Knucklehead Base Gaskets.
15-0526 — 1941-47 Knucklehead, Replica VT No. Year Model Brand
15-0820 17034-38 1941-47 Knucklehead, James 15-0412 1930-36 VL GB
15-0491 Cam Cover 1936-48 UL GB
B 14-0108 1936-47 Knucklehead GB
A C 7410-1
15-1290 1936-47 All With Bead
Left Side Engine Case Seals.
VT No. # OEM Year Model
7411-2 A 24776-40 1936-54 61 and 74-80
14-0965 24031-55 1955-68 Big Twin, OE type
7410-1 C 24031-55 1955-68 Big Twin, Colony
7411-2 7410-1-OS C Oversize 1955-68 .002
7410-1-US C Undersize 1955-68 .002
14-0965
14-0177 Seal only For above
14-0177 14-0185 B 24031-69 1969 only Big Twin
14-0108 B 12026B 1970-99 74 and 80 Big Twin, 5 pack
10-8284 10-8284 Kit 1970-99 74 and 80
Note: VT No. 7410-1 and 7410-55 are screw-in inserts with integral
seals. VT No. 14-0965 is a stock type screw-in without seal.
VT No. 7411-2 and 8211-2 both include seal, spacer and snap ring.
524
15-0604
Pan-Shovelhead Gasket Set
15-0605 15-0511
GBTM Complete Gasket Kits include all of the gaskets, seals

and O-rings necessary to rebuild each model listed. Models
which require quad pushrod seals include quad type. Head
15-0606 gaskets are veloprene coated; all other components are stock
GBTM Top End Kits include all gaskets and O-rings including replacement type.
pushrod corks from the cylinder base and up. Perfect for pis- VT No. OEM Year Model
ton and valve jobs. 15-0508 17028-48 1948-65 Panhead
Fits Big Twin Overhead Valve Top End 15-0509 17029-66 1966-69 Shovelhead
CLASSIC
VT No. OEM Year Model 15-0510 17029-70 1970-77 Shovelhead
15-0604 17034-48 1948-65 Panhead 15-0511 17029-79 1979-84 Shovelhead 4-Speed
15-0605 17034-66 1966-69 Shovelhead 15-0512 17029-80 1980-85 Shovelhead 5-Speed
15-0606 17034-78 1978-85 Shovelhead 15-0823
15-1625 As Above W/Fire Ring Head Gaskets
Panhead Cam/Lifter Base Gasket

Kit for cam cover, tappet base and
distributor.
VT No. 15-0492
15-0803 James Gasket Sets for
Big Twin. Top quality
gaskets are available as James Top End Sets.
complete sets, engine VT No. OEM Years Model
sets or top end sets. 15-0821 17034-48 1948-65 Panhead
Contain gaskets, oil (Veloprene Coated Head Gaskets)
seals and O-rings nec- 15-1295 17034-48 1948-65 (.045” fire ring head gaskets
essary for a complete & Foamet® cylinder base gaskets)
rebuild. 15-0823 17034-66 1966-84 Shovelhead
(Veloprene Coated Head Gaskets/Quad Pushrod Seals)
Complete Engine Gasket Sets Big Twin Overhead Valves. 15-1187 — 1966-84 Shovelhead
James OEM Years Model (Fire Ring Head Gaskets)
15-0801 17028-48 1948-65 Panhead 15-1188 — 1978-84 Shovelhead 3⁵⁄₈” Big Bore
(Veloprene Coated Head Gaskets thick & (Veloprene Coated Head Gaskets/Steel Base Gaskets)
thick Pan cover gaskets) 15-1011
15-0273
15-0804 17029-66 1966-84 Shovelhead
(Veloprene Coated Head Gaskets)
15-0803 17029-70A 1970-84 Shovelhead
(Fire Ring Head Gaskets)
Note: VT No.15-0804 includes primary gaskets and seals, VT No.
15-0801 does not include primary gaskets. 15-0104 15-1010
15-1216
15-1242 15-0266
15-0887
Fire Ring Head Gasket Set for 1966-84 Shovelheads includes
head gaskets, exhaust port gasket and intake manifold seals
only. Cylinder Head Gaskets.
VT No. Type GB No. James OEM Fits
15-1216 Fire Ring 15-0273 15-1011 16770-66 1966-84 Head Fire Ring, pair
15-0887 Fire Ring with Bead 15-0104 15-1010 — 1966-84 Head Veloprene Coated
Gary Bang Patch Set can be easily ironed on or 15-0266 15-0977 — As Above Stock Type
— 15-1442 — 1966-84 Multi Layered Steel
sewn on. VT No. 48-0743 15-1242 — — 1966-84 Copper
48-0743 525
4-Speed Transmission
17-0026
17-0025
17-0026 17-0026 17-0000
17-0035
replica early kick arm
17-0004
17-0035
with chrome kick cover

17-2500 and arm
Motor Shop Assembles

10 Transmissions Per
Batch
Over 3000 in service since 1993
17-0026
4-Speed Transmissions include ReplicaTM Cast Case, internal
parts, kicker cover and components, clutch rod, throwout bear-
ing, natural finish ratchet top with chrome dust cover, arm, mount
studs, clutch hub nut, seal and key, fully assembled for Big
Twins. All are 3.00 ratio FL style.
• Big Twin 1936-64 models feature original style case VT No.
43-9149 with early style main drive gear, 44 rollers and 2:1
ratio speedometer drive gear for kick start only.
• VT No. 17-0025 and 17-0035 for 1936-64 feature chrome kick
cover and chrome offset kicker arm.
• VT No. 17-0026 and 17-0000 feature original style aluminum
kick cover and early one piece black kick arm for kick start
only.
• VT No. 17-0004 fits electric start primary cover and is for 1:1
ratio speedometer.
VT No. Year Type
17-0025 1936-64 Ratchet
17-0026 1936-64 Ratchet
17-0004 1965-69 Ratchet
17-0035 1936-64 Jockey
17-0000 1936-64 Jockey
17-2500 1936-40 Jockey
526
4-Speed Replica
Transmission
1970-84 Ratchet Top
Style Pictured
17-0005 Left Side View

17-0005
CLASSIC
17-0005
Installed
17-0013
4-Speed Transmissions include ReplicaTM cast case internal

parts, chrome kicker cover and components, clutch rod, throw-
out bearing, natural finish ratchet top with chrome dust cover,
arm, mount studs, clutch hub nut, seal and key, fully assem-
bled for Big Twins.
• 1970-84 models feature case with mount lugs to accept alu-
minum inner primary covers. Speedometer drive gear sup-
plied is 1:1 ratio. Torrington needle bearings used through-
out. VT No.’s 17-0012, 17-0013 will accept belt or chain final
rear drive which accepts electric start.
4-Speed Note: The shift pattern will be reversed when installed in mid-
Transmission shift models as it has the FL type ratchet top to be used with
forward controls.
VT No. Ratio Year
17-0013
17-0005 3.00 1970-84 FLH
17-0006 2.44 1970-84 FX
https://www.youtube.com/watch?v=spXaleIxrAs&list=LLoKfvCX- 17-0012* 3.00 1970-84 FL with Rotary Top
CqOKPF5smOwNON1A&index=12 17-0013* 2.44 1970-84 FX with Rotary Top
*Note: Available with 1979-85 type with Rotary Top.
5 Speed Conversion
21-4750
17-0015
S&S 5-Speed Transmission

VT No. Item
17-0548 Shorter Countershaft
12-0394 Countershaft Needle Bearing
21-4750 FX Shifter Linkage Kit 5-Speed Transmission as pictured, direct bolt in replacement
on 1970-84, for the 4-speed unit. Completely assembled using
replica gears, shafts and transmission case. All internal parts
interchange with stock 5-speed components. Available with
late clutch release mechanism. Use 1980-84 FXR 5-speed
transmission sprocket with offset so teeth are closer to trans-
mission case. Inner primary must be clearanced for final fitting.
Available with late clutch release mechanism for 1987-up type
cable.
VT No. 17-0015
527
Transmission Case 1936-64 Big Twin
Transmission Case
replaces 34700-36.
Includes main drive case
race and countershaft
bushings installed. Order
studs separately. Case will
accept reverse gear idler
shaft.
43-9105 VT No. Item
43-0783 43-9149 Case
Replica 4-Speed Transmission Cases. 12-2108 Kick Cover Studs
VT No. OEM # Years 12-2104 Mount Studs
Ratchet Type
43-9105 34702-78 1 Late 1977-Early 79
Rotary Type
43-0783 34702-80 2 1979-84
1. Uses the Torrington style 4th gear bearing VT. 12-0300 and accepts reverse
gear idler shaft.
2. Can also be used on 1981-84 models belt or chain drive with Torrington style
4th gear bearing VT No. 12-0300 and 17-0101 bearing retainer and 17-9883
housing for kick starter side.
4 Speed Transmission
Case and Ratchet Top Set
fits 1965-Early 1979 Big
Twin. Both parts are in a nat- 1936-64 Big Twin 4-Speed Transmission Case and Ratchet
ural alloy finish. Case accepts Top Set features a natural alloy finish. Case includes main
Torrington 4th gear bearing drive race and countershaft bushings installed. Ratchet top with
VT No. 12-0300. FLH style FLH style pattern is assembled with all internal parts including
ratchet top gives 1 down, 3 chrome dust cover and arm. Screws included.
up shift pattern and is assem- VT No. 43-0551
bled with all internal parts,
including chrome dust cover Hardware Kit fits 1979-84 Big Twin
and arm. VT No. 43-0550 4-Speed case.
VT No. 17-0849
8232-26 9418-19
9654-4 9919-3
9419-19 7602-11 Transmission Mount Case Studs are heat treated as original
for 4-Speed. Available in set of 4.
VT No. OEM Type Year Brand
12-2104 34723-47 Stock 1948-83 Replica
9654-4 34723-47 Stock As Above Colony
12-2105 34724-36 Oversize 1936-83 Replica
9655-4 34724-36 Oversize As Above Colony
Big Twin Transmission Mount Kit include bolts and washers 9919-3* 34725-26 Aligning 1936-83 Replica
necessary for installation. *Note: Use for rigidity when 4-speed belt drive is used, 2 set
VT No. Year Finish required
8231-26 1936-64 Chrome
8232-26 1936-64 Cadmium
9695-26 1936-64 Parkerized
2314-36 1936-47 Parkerized
7602-11 1936-64 Acorn
37-9158 Biter Washer for Above
9418-19 1965-76 Chrome 48-1331 48-1364 48-0499 48-0196
9419-19 1965-76 Zinc V-Twin Specialized Catalogs are available for dealers to supply to customers.
9420-21 1977-86 Chrome VT No. Item
9421-21 1977-86 Zinc 48-1331 Knucklehead (Version 2)
48-1364 Panhead
48-0499 XL
48-0196 Touring
48-1895 Set (Knucklehead and Panhead)
528
17-6654
Trans Mount Plate Replica Big Twin Transmis-
sion Plate Kit includes ad-
juster strap and all hardware
necessary for installation.
VT No. Finish Year
17-0244 Chrome 1936-57
17-0245 Parkerized 1936-57
17-0246 Chrome 1958-64
17-0247 Black 1958-64
17-0235 17-0236
17-6660 17-6650
Adjusting Strap Kit for 1936-64 Big Twin includes strap,

adjusting screw and mount bolts.
CLASSIC
17-0235 Parkerized
17-0236 Chrome
Replica Parkerized Adjuster Screw
is just like the original and features a
17-6653 parkerized finish. Screw is shaped for
17-6658 exact replacement on restorations.
Fits 1936-52 EL, 1941-64 FL, 1937-
48 U. VT No. 17-0891
B
17-6651
Steel Transmission Mount Plates.

VT No. OEM Fits Finish A
17-0110 17-6655
17-6660 47698-36 1936-57 Chrome
17-6654 47698-36 1936-57 Parkerized
17-6650 47698-36 1936-84 74 and 80 Big Twin Chrome 17-6655
47698-65 Rigid/Swing arm 4-Speed Installed
17-6657 As Above Black
17-6653 47698-58A As Above Parkerized
17-6651 Custom Fits Rigid mount Zinc
5-Speed Transmission
in 4-Speed, Paughco Frame
17-6658 Custom Fits 4-Speed Transmission Chrome
in 5-Speed, Paughco Frame
(A) Transmission Adjuster Kit includes three pieces as

shown allowing the late model transmission case to be secured
and adjusted. Strap and adjuster bolt available separately. For
use on 1936-64 model Big Twin.
17-7660 17-7661 VT No. OEM Item Finish
Adjustable Transmission Plate. The built in dual adjusters 17-0110 Kit Adjusting Set, 3 piece Chrome
operate from the end of the 1/2” thick steel place by counter 17-0108 47720-36 Strap Chrome
bored socket head screws which allow accurate alignment of 17-0109 47720-36 Strap Black Phosphorized
the mainshaft and are ideal for open belt drives models. The 17-0107 34735-36 Adjuster Chrome
three holes at the front fit various frames. Fits 4 speed Big Twin 9735-1 34735-36 Adjuster Chrome
transmissions from 1979-86 with flat bottom cases and 1936 to 9737-1 As Above Parkerized
early 1978 cases if the sliders are milled off the bottom of the (B) Even Pull Kit allows a more positive even transmission
case. adjustment. For use on late style transmission assembly in a
VT No. Finish rigid frame.
17-7660 Chrome VT No. 17-6655
17-7661 Black Transmission Bolt Lock Tab replaces 34747-
65. Will lock the front 2 bolts securing the trans-
Rigid Frame Transmission Plate Spacer will mission plate to frame on 1965-84 Big Twin.
raise transmission position on 1936-57 frames. VT No. 17-0943
VT No. 31-0491
529
4-Speed Big Twin Transmission
Refer to opposite page for photo regarding this listing.
Gear #of Teeth Ratio Model Year VT No. Motor Shop Jims Andrews OEM Note #
Mainshaft Gears
1st and 2nd 15 x 20 Stock UL/FL 1938-58 17-0539 — — 17-1093 35282-36 1 A
1st and 2nd 15 x 20 Stock FL/FLH 1959-84 17-0197 — — 17-1091 35282-59 A
1st and 2nd 17 x 20 Stock FX/FXE 1974-79 17-0198 — — — 35282-74 A
1st and 2nd 17 x 25 Stock FX/FXE 1980-85 17-0542 — — — 35282-79 A
3rd 24 Stock UL/FL 1938-58 17-9829 — — 17-1048 35306-36 2 B
3rd 24 Stock FL/FX 1959-85 17-0188 — — — 35306-59 B
3rd 24 Stock FL/FX 1959-85 — 17-0545 — 17-8230 35306-59 3 C
3rd 23 1.35:1 FL/FX 1937-85 17-9901 — — 17-9755 4 B
4th 26 Stock FL/FX 1941-76 17-0194 — 17-8231 35065-65B D
4th 26 Stock FL/FX 1977-85 17-0195 17-0253 — 17-8232 35067-77 5 D
3-4 Shift Clutch FL/FX 1941-85 17-0113 17-0114 — 17-8234 35440-38 E
3-4 Shift Fork FL/FX 1941-85 17-0115 17-0122 — 17-9750 34158-36 6 F
Countershaft Gears
1st 26 Stock UL/FL 1936-85 17-0199 — — 17-1092 35765-36 G
1st 24 Stock FX/FXE 1974-85 17-0196 — — — 35717-74 G
2nd 21 Stock FL/FX 1936-85 17-0782 — — 17-8229 35751-36 H
2nd 24 Stock FXWG 1980-85 17-9753 — — — 35751-79 H
3rd and 4th 15 x 17 Stock FL/FX 1941-75 17-0200 — — 17-8236 35713-36 I
3rd and 4th 15 x 17 Stock FL/FX 1976-84 17-0201 17-0253 — 17-8237 35716-76 I
1-2 Shift Clutch FL/FX 1941-85 17-0112 17-0114 — 17-8233 35665-36 J
1-2 Shift Fork FL/FX 1941-85 17-0116 17-0122 — 17-9750 34159-36 6 K
Speedometer Drive FL/FLH 1937-E61 17-9160 — — — 35635-36 L
Speedometer Drive FL/FLH L1961-68 17-9161 — — — 35635-62 L
Speedometer Drive FL/FLH 1969-80 17-0094 — — — 35635-69 7 L
Counter/Mainshafts
Mainshaft FL/FLH 1937-64 17-0139 17-0223 — 17-8500 35040-50 M
Mainshaft FL/FLH 1965-69 17-0140 17-0224 — 17-8501 35040-65 M
Mainshaft FL/FX 1970-84 17-0141 17-0142 — 17-8502 35039-70 M
Mainshaft FL/FX L80-E84 17-0144 — — — 35039-80 M
Mainshaft FL/FX 1985-86 — — — 17-8503 35039-85 8 M
Countershaft FL/FX 1936-75 17-0128 17-0325 17-0125 17-7650 35614-65 N
17-0190 17-8226 17-0191 17-0202
17-9158
17-0539
Gear Sets
1st 17 x 20 2.44:1 FL/FX 1937-85 17-0190 — — 17-8225 — 9 A,G
1st 16 x 20 2.60:1 FL/FX 17-0191 — — 17-8226 — A,G
1st 15 x 20 3.00:1 FL/FX 1938-58 17-0202 — — — — AB
1st 15 x 20 3.00:1 FL/FX 1938-58 — — — 17-1052 — 1, 10 A,G
1st 15 x 20 3.00:1 FL/FX 1959-85 — — — 17-1049 — 10 A,G
1st and 2nd (2.24 1st and 1.65 2nd) FL/FX 1937-85 17-0060 — — 17-6656 — A,G
3rd 1.35:1 FL/FX 1937-75 — — — 17-8227 — B, I
3rd 1.35:1 FL/FX 1976-85 17-9158 — — 17-8228 — B, I
Complete Gear Sets include A, B, C, D, E, F, G, H, I, J
2.44 1st, 1.35 3rd FL/FX 1936-76 — — — 17-6000 — 11
2.44 1st, 1.35 3rd FL/FX 1977-84 — — — 17-6004 — 11
2.44 1st, 1.23 3rd FL/FX 1936-76 — — — 17-6001 — 9, 11
2.44 1st, 1.23 3rd FL/FX 1977-84 — — — 17-6005 — 9, 11
2.60 1st, 1.35 3rd FL/FX 1936-76 — — — 17-6002 — 11
2.60 1st, 1.23 3rd FL/FX 1936-76 — — — 17-6003 — 11
2.60 1st, 1.23 3rd FL/FX 1977-84 — — — 17-6007 — 11
Notes: Reverse and 3-Speed Big Twin Transmission Parts

1. 1-2 Cluster has no rear counterbore and requires short length 1936-58 early third gear. VT No. OEM Description
2. V-Twin gear has bronze bushing. Andrews gear is machined to size no bushing is used.
3. Motor Shop and Andrews Gear features ball milled lead in ramps. Can be used in early transmission, requires
17-9877 33626-72 H. Shift Mirror Mount
late type 1959-85 1-2 Cluster. 43-9106 34800-65 3-Speed Lid Assembly
4. Replacement for 1.35:1 3rd Gear Set only. 17-9888 35073-70 Low Gear Mainshaft
5. Andrews Gear is updated type with O-Ring groove. 17-9890 35762-39 Countershaft Low, 3-Speed and Reverse
6. Sifton and Andrews Shift Forks sold in sets only included 1 each, lead main and counter. 17-9892 36140-36 Idler Gear
7. Use VT No. 36-0810 Speedometer Drive for 17-9160 use 36-0812 drive for 17-0094. 17-9893 36150-31 Bushing Idler Gear
8. For Rear Belt Drive Models
9. Stock FX ratio
17-9894 36158-36 Idler Shaft
10. Stock FL ratio. 12-1520 35703-39 Cluster Gear
11. Does not include Mainshaft and Countershaft 17-9815 35775-39 Countershaft Gear
530
4-Speed Big Twin Transmission
Refer to
opposite
page
for the
parts
listing.
17-0545
CLASSIC
10-2548
10-0729 10-0730
1936-69 Big Twin Mainshafts are made to factory prints for 4
Replacement Big Twin Transmission Bushings for 1941-85
speed models.
3 and 4-Speed.
VT No. Length Sifton Andrews OEM Years
VT No. OEM Application
17-0139 11³⁄₄” 17-0223 17-8500 35039-50 1936-64
10-0729 35789-36 Countershaft Low 1936-85
17-0140 12” 17-0224 17-8501 35039-65 1965-69
10-0734 35789-36 As Above, Jims
17-0141 12¹⁄₂” 17-0142 17-8502 35039-70B 1970-79
10-0730 35791-36 Countershaft Second
12⁷⁄₁₆” 17-0144 35039-80 L1980-E1984
10-0735 35791-36 As Above, Jims
Big Twin Countershaft/Mainshaft 10-0727 35094-65 Main Drive Gear 1941-85
Rollers set of 88 used. 10-2548 35094-65 As Above Motor Shop
88 Pack 100 Pack OEM Size 10-2487 As Above Andrews Gear
17-0145 12-4576 9084 Standard 10-0728 35322-38 Mainshaft Second and Third
17-0146 9085 .0004 Handshift Models Only
12-4608 .0006 10-0738 35322-38 As Above, Jims
17-0148 .0010 17-0352,
17-8232
Needle Bearings for Big Twin feature full compli-

ment roller design.j 17-0194
VT No. Koyo OEM Type/Use Main Drive Gear. V-Twin and Sifton brands include bushing
12-0397 12-0316 9058 1958-99, Cam and seal installed. Andrews brand includes installed bushing
— 12-0326 35690-54 Closed, Transmission only. Order seal separately for Andrews brand.
12-0316 12-0396 12-0327 35961-52 Open, Transmission VT No. OEM Year Brand
12-0398 12-0300 8905 MD Gear, 1977-81 17-0194 35065-65B 1941-76 V-Twin
12-0399 12-0349 8906 MD Gear, 1982-85 17-8231 35065-65B 1941-76 Andrews
17-0598 35065-65B 1941-76 Sifton
Note the bearing surface outside diameter for main drive gear 17-0195 35067-77 1977-85 V-Twin
bearings do not interchange. 17-8232 35067-77 1977-85 Andrews with
Outside Diameter Year Type 35067-84 O-Ring Groove
1.6290 1941-76 Loose Rollers 17-0352 As Above 1977-85 Sifton
1.6235 1977-85 Full Complement 17-0599 35067-77 1977-85 Replica
Oil Deflector Main Drive Gear Kit. Includes all 10-0727 35094-65 Bushing OE
parts pictured to fit 1936-64 3 and 4-Speed mod- 10-2548 35094-65 Bushing V-Twin
els. Replaces 35211-36 lock nut. VT No. 17-0204 10-2487* 35094-65 Bushing Andrews
14-0106 12013A All Gear Seal, 5 pack
Main Drive Gear Seal Kit for 1941-76 Big Twin. *Note: Bushing to fit Andrews 4th gear only.
Includes case race, seal, nut and lock tab. Note the bearing surface outside diameter for main drive gear
VT No. 17-0693 bearings do not interchange.
531
4-Speed Mainshaft Group
17-0140
17-0142
17-0141
17-0139
12-1103
17-0545
17-0690
17-0188
Mainshaft Group 1936-85 64”-74”-80” 3-4 Speed. 17-9883 35100-79 1980-84 Bearing Housing, Right
VT No. OEM Item 17-0104 35111-36 1936-79 Retaining Plate
12-1172 375 Dowel Pin 17-0101 35111-80 1980-85 Retaining Plate
8114-1 700 Chrome Drain Plug 17-0150 35125-37 1937-78 Standard Race
8495-1 700 Cadmium Drain Plug 17-0690 Replica 1937-78 Standard Race
12-0300 8905 1977-81 Needle Bearing 17-0220 As Above Jims
12-0349 8906 1982-85 Needle Bearing 17-0230 — 1937-78 .002 Race, Jims
12-0307 9020 Ball Bearing 17-0151 — 1937-78 .005 Race
12-9937 9020 Ball Bearing, Fafner 17-0221 As Above Jims
17-0145 9084 Standard Roller, 88 pieces 17-0152 — 1937-78 .010 Race
17-0146 9085 .0004 Roller, 88 pieces 17-0222 As Above Jims
17-0147 9086 .0008 Roller, 88 pieces 12-0918 35129-36 Retaining Ring
17-0148 — .001 Roller, 88 pieces 17-0162 35131-36 1936-77 Standard .060 Washer
17-0411 1864B Bumper Plate Screw 17-0414 — 1936-77 .065 Washer
37-9174 2333W 1936-79 Plate Screw 17-0164 — 1936-77 .070 Washer
37-0557 2607 1980 Plate Screw 17-0165 — 1936-77 .080 Washer
37-9173 3789A 1980-84 Plate Screw 17-0205 35159-39 1936-64 Oil Deflector
12-2109 24823-80 1965-85 Cover Stud Set 17-0185 35171-37 1937-76 Main Drive Spacer
15-0158 33295-36 Cover Gasket 17-0392 35171-37 1937-40 Main Drive Spacer
12-2108 33298-36 1936-64 Cover Stud Set 12-0207 35175-38 1941-77 Spacer Key
17-0407 33353-36 1941-77 Bumper Plate 8408-1 35211-36 Sprocket Lock Nut
17-0408 33353-78 1978-79 Bumper Plate 17-0901 35216-36 Lock Tab
17-0409 33429-39 1939-79 Oil Deflector 14-0122 35230-39 1941-78 Oil Seal
17-0410 33429-80 1980-84 Oil Deflector 7805-2T As above 3 piece kit
17-0609 34090-84 1984-85 Inner Race 14-0123 35231-36 1941-78 Cork
43-9149 34700-36 1936-64 Big Twin Transmission Case 17-0197 35282-59 1959-85 Low and 2nd
9620-13 34720-36 1936-55 Top Plug 17-0198 35282-74 1974-79 FX Low and 2nd
37-8890 34720-56 Gear Box Vent 17-9829 35306-36 1936-58 3rd Gear
12-2104 34723-47 Stud, Set of 4 17-0188 35306-59 1959-84 3rd Gear
12-2105 34724-36 Stud Oversize Set of 4 17-0545 35306-59 1959-84 3rd Gear
17-0107 34735-36 Chrome Adjusting Screw 10-0728 35322-38 1941-58 3rd 2nd Gear Bushing
15-0161 34824-36 1936-78 Cover Gasket 12-0919 35337-36 3rd Retaining Ring
15-0162 34824-79 1979-84 Cover Gasket 17-0158 35365-36 Mainshaft 3rd Washer Standard .063
17-0139 35039-50 1936-64 Mainshaft 11³⁄₄” 17-9601 — Mainshaft 3rd Washer -.005
17-0140 35039-65 1965-69 Mainshaft 12” 17-9602 — Mainshaft 3rd Washer -.010
17-0141 35039-70 1970-83 Mainshaft 12¹⁄₂” 17-9603 — Mainshaft 3rd Washer -.015
12-1103 35046-36 Bearing Nut (Replica) 17-9604 — Mainshaft 3rd Washer +.005
17-0900 35050-40 Lockwasher 17-9605 — Mainshaft 3rd Washer +.010
17-0194 35065-65B 1941-76 Main Drive Gear 17-9606 — Mainshaft 3rd Washer +.015
17-0195 35067-77 1977-85 Main Drive Gear 17-9607 — Mainshaft 3rd Washer +.020
17-0186 35070-77 1977-79 Main Drive Spacer 17-0113 35440-38 Small Shift Clutch
17-0187 35070-80 1980-81 Main Drive Spacer 17-9830 37436-36 Mainshaft End Bushing
17-0063 35070-82A 1982-85 Main Drive Spacer 14-0129 37741-67 1980-81 Oil Seal
17-9242 35079-80 1980-81 Drive Spacer Washer 14-0130 37741-82 1982-85 Oil Seal
17-0062 35070-84 1984-86 Main Drive FXWG Spacer, .391” thick 17-0108 47720-36 Chrome Strap
17-0064 35079-82A 1982 only Main Drive Spacer 17-0109 47720-36 Black Strap
10-0727 35094-65 1941-84 Main Drive Bushing
17-9761 35100-36 1936-79 Bearing Housing, Right
532
4-Speed Countershaft
17-0200
17-9890
17-9890
17-9160
17-0199
CLASSIC
Countershaft Group for 1936-85 Big Twin 3 and 4 Speed. 17-0226 — .110 Countershaft Washer, 5 pack
VT No. OEM Item 17-0170 35915-36 Gear Roller Washer Left .060
14-0507 1115 O-Ring 17-0206 — As Above, .050
12-0527 7911 Nut, 5 pack 17-0207 — As Above, .055
17-0902 33082-16 Lockwasher, 10 pack 17-0209 — As Above, .065
17-0128 35614-65 Countershaft, 1936-75 17-0210 — As Above, .070
17-0129 35614-76 Countershaft, 1976-79 17-0169 35917-36 Washer
17-0130 35614-80 Countershaft, 1980-85 12-0924 35920-36 Lock Ring, 10 pack
17-0145 9084 Needle, Standard 88 piece 12-0327 35961-52 Needle Bearing 1977-84
17-0146 9085 .0004 Oversize 15-0171 36025-36 Cap Gasket, 10 pack
12-4608 — .0006 Oversize 17-0127 36027-36 End Cap, Chrome
17-0147 9086 .0008 Oversize 17-0171 36046-36 Standard Right Bushing 1937-76
17-0148 — .001 Oversize 17-0172 As above .005 Oversize 1937-76
17-0126 35630-36 Lock Plate, 5 pack 17-0173 36048-36 Standard Left Bushing 1937-76
17-0112 35665-36 Shifter Clutch Large 17-0174 As Above .005 Oversize 1937-76
17-0200 35713-36 1936-76 Countershaft Gear, 15-17 Teeth 17-0175 36045-76 Standard, Right Bushing 1976-79
17-0201 35699-76 Late1976-84 Countershaft Gear, 15-17 Teeth 17-0176 As Above .005 Oversize 1976-79
17-0782 35751-36 2nd Gear (21T) Sifton, 1936-78 17-0177 36048-76A Standard, (R or L) Side Bushing 1976-84
N/A 35751-36 2nd Gear (21T) Replica 17-0178 As Above .005 (Right or Left) Bushing 1976-84
N/A 35751-79 2nd Gear (24T) 1980-83 17-9892 36140-36 Idler Gear Reverse
17-9890 35762-39 Low, 3-Speed and Reverse 17-9893 36150-31 Idler Gear Bushing
17-0199 35765-36 Low Gear 26T 1936-85 17-9894 36158-36 Idler Gear Shaft
17-0196 35717-74 Low Gear 24T 1974-85 FX
10-0729 35789-36 Low and Reverse Bushing
10-0730 35791-36 Low or 2nd Bushing 17-0128 17-0325 17-0131
12-0925 35810-36 Lock Retaining Ring, 10 pack
17-0167 35811-36 Retaining Washer, 5 pack
17-0161 35812-36 Bearing Washer, 5 pack 17-0129 17-0326 17-0138
17-0123 35875-36 Washer Set 7 pieces includes .074,
.078, .082, .085, .090, .095, .100
17-0179 — .050 Countershaft Washer, 5 pack
17-0180 — .055 Countershaft Washer, 5 pack 17-0130 17-0327
4-Speed Countershafts.
17-0211 35876-36 .074 Countershaft Washer, 5 pack
17-0212 35877-36 .078 Countershaft Washer, 5 pack VT No. Sifton Jims Andrews OEM Years
17-0213 35878-36 .082 Countershaft Washer, 5 pack 17-0128 17-0325 17-0125 17-7650 35614-65 1936-75
17-0216 35883-36 .095 Countershaft Washer, 5 pack Transmission Countershaft End Cap Kit
17-0217 35884-36 .100 Countershaft Washer, 5 pack is for clutch side with gasket and screws,
17-0225 — .0105 Countershaft Washer, 5 pack Replaces 36027-36.
VT No. 17-0127
Transmission Needle Bearings feature full compli-

17-9160 17-9161 17-0094 ment roller design.
36-0094
VT No. Torrington OEM Type
36-0094 17-9160 35635-36 Speedometer Gear, 7 Teeth 12-0461 12-0326 35690-54 Closed
36-0095 17-9161 35635-62 Speedometer Gear, 4 Teeth 12-0396 12-0327 35961-52 Open
36-0096 17-0094 35635-69 1969-80 Speedo Gear 7 Teeth
533
1979-85 Big Twin 1979-85
Rotary Transmission Top
4-Speed Rotary Top Shifter Linkage and Hardware for 1979-85 FX-FL-FXWG models.
Rotary Tops
VT No. OEM # Item U/M
17-0120 650 2 Plug, 10 pack
17-9945 2818A 3 Bolt
9656-8 — 4 Screw Set, Chrome
12-0702 6750 10 Shim, .005, 10 pack
12-0703 6752 11 Shim, .015, 10 pack
12-0938 11016 14 Snap Ring, 10 pack
12-0939 11036 15 Pawl Retainer, 10 pack
14-0102 12010 16 Cover Oil Seat, 5 pack
N/A 25715-47 17 Grease Fitting, 10 pack
15-0217 25811-11 18 Switch Washer, 10 pack
10-1269 32535-48 19 Lever Washer, 5 pack
17-9947 33167-79 20 Top Cover
17-9909 33174-79 21 Shaft Cover
17-2125 As Above 21 Chrome
17-9820 33177-79 22 Lever Complete FL-FXWG
17-9933* As Above 22 Chrome Forged, Steel
17-9873 33185-79 25 Shifter Rod Assembly FX-FXE
17-9869 33187-79 26 Spacer Standard, 5 pack
17-9870 — 26 Spacer .005 Oversize, 5 pack
17-9998 — 26 Spacer .010 Oversize, 5 pack
17-9910 33188-79 27 Plunger Body
17-9872 33190-79 27A Lever Arm FL-FXWG
15-0157 33196-79 28 Cover Gasket, 10 pack
17-0907 33197-79 29 Bolt Lock, 10 pack
17-0163 33198-79 30 SW Bushing, each
13-0124 33199-79 31 Pawl Spring, 10 pack
17-0010
13-0125 33201-79 32 Carrier Spring, 10 pack
32-0043 33901-79 34 Neutral Switch
17-9948 34020-79B 35 Cam Assembly
14-0533 34036-80 Shifter Cam Seal, Oversize 1980-84, 10 pk
12-0917 34040-52 37 Retaining Ring, 10 pack
17-0076 34062-52 38 Cam Follower
13-0130 34068-52A 38A Cam Follow Spring, 10 pack
17-0115 34158-36 40 Main Shifter Fork 17-0010 Top View
17-0116 34159-36 41 Countershaft Shifter Fork
17-0118 34168-52 42 Finger Roller, 2 pack 1979-85 4-Speed Trans Top includes all parts completely
12-0526 34179-33 43 Bushing Nut, 5 pack
17-0906 34180-33 44 Lock Washer, 10 pack
assembled. Arm with grease fitting is chrome plated; all other
17-9896 34184-79 45 Shifter Finger parts have a natural finish.
17-0136 34145-76 46 Fork Shaft VT No. OEM Fits
17-0058 34461-72 47 Shifter Pawl Spacer 17-0010 33158-80 FLH
N/A 34476-72 48 Shifter Pawl
17-9949 34494-74C 49 Pawl Carrier 17-0011 33183-80 FXE
17-9906 34517-80 50 Rear Pawl Stop
17-9907 34518-80 51 Front Pawl Stop 17-0950 Shifter Top
17-9958 Set 50/51 Pawl Stop Set Hardware Kit
17-9904 34652-80 52 Shifter Lever Shaft fits Late 1979-85
17-9843 34655-79 53 Lever Complete FX-FXE 4-Speed Big Twin
17-9937 As Above Chrome Forged
17-9882 34658-79 54 Lever Pin, 5 pack rotary top includes
17-9874 34659-79 55 Rod Linkage FX all parts except top
15-0162 34824-79 56 Cover Gasket casting, shaft cover
17-9911 35336-74 57 Thrust Washer, 5 pack
and linkage.
VT No. 17-0950
Jockey Top
17-0753 Cam Plunger Kit includes numbers 34053-36 cap
screw, 34057-36 spring, and 8872 ball on 1936-79
hand shifter models.
VT No. Item
17-9764 Kit
13-0129 Spring, 10 pack
12-0156 Ball, 50 pack
21-0216 Inner Shifter Arms fit 3 and 4 speed hand shift
Hand Shift Jockey Top with alloy finish is for1936-78 Big transmission tops. VT No. 17-0500 has ⁵₁₆ — 24
Twin. 4 Speed type. Available with or without neutral switch. threaded hole. VT No. 21-0216 adapter arm
VT No. Type reverses shifting on 1936-50 tops.
17-0753 Without switch VT No. OEM Year Finish
17-0501, 17-0504 34448-36 1937-50 Parkeized
17-0754 With switch
17-0500 17-0501 34448-36 1937-50 Zinc
17-1022 Shift Drum
17-1022 17-0500 34448-51 1951-65 Zinc
534 21-0216 — 1936-50 Zinc
1952-79 Big Twin Ratchet Top
17-0050
17-0281
CLASSIC
1952-79 Big Twin Ratchet Top Parts. Ratchet Top Assembly Unit replaces 34799-65 features
VT No. # OEM Item
12-1162 4 623 Roll Pin
cast shifter drum, chrome arm and cover, and natural finish or
17-0079 6 1369 Phil. Screw, 10 pack chrome top casting. FLH type has a 1 down, 3 up shifter pat-
17-0078 7 1608 Screw, 10 pack tern, FX has a 1 up and 3 down pattern.
17-0077 9 1764 Screw, 6 pack VT No. Type Item Type
8148-13 10 1765W Cadmium Screw 17-0050 Plain Complete FL
11 1766W Set
17-0281 Plain Complete 1952-58
21-1987 12 1767W Stainless Steel Lever Screw, 12 pack
17-0074 13 1772W Screw, 5 pack 17-0257 Plain Complete 1952-78
33 9106A Pawl Carrier Pin 17-0980 Chrome Complete FL
12-0702 21 6750 Shim .005” 17-0852 Plain Complete FX
12-0703 22 6752 Shim .015” 17-0875 Chrome Complete FX
17-9751 23 6754 Shim 3/32”
10-1257 22 Shim .007
17-0106 Plain Top Casting Only —
13-0126 38 33390-26 Gear Spring, 10 pack 17-0232 Chrome Top Casting Only —
17-9765 45 33960-36A Gear Slap Stik Ratchet
17-9766 47 34019-73 Shifter Cam, FL only 17-0884 17-0880 Top Kit.
17-0208 47 44006-76 Shifter Cam, FX
17-0133 49 34030-36 Cam Shaft Hand Shifter
VT No. Finish
17-0134 49 34031-41 Cam Shaft Foot Shifter 17-0884 Chrome
14-0117 50 34036-36 Oil Seal 17-0880 Natural
17-0132 51 34050-36 Lock Screw, each
3117-2 51 34050-36 Lock Screw Kit
17-0076 52 34062-52 Cam Follower
17-0075 53 34064-52 Cam Bolt
17-0916 54 34066-52 Lock Tab, 10 pack Ratchet Top Shifter Cam Follower Kit for 1952-78
13-0130 55 34068-52A Spring Big Twin. Includes bolt, follower, spring and lock tab.
17-0135 57 34140-36 Fork Shaft 1936-76
17-0136 57 34145-76 Fork Shaft 1977-84 VT No. 17-0750
17-0115 58 34158-36 Main Shifter Fork
17-0116 59 34159-36 Countershaft Shifter Fork
17-0097 60 34165-36 Shifter Finger Gear Box Vent Screw replaces 34720-56 in 1936-
17-0117 61 34168-39 Finger Roller Pair 84 4-speed transmissions. Sold each.
17-0096 62 34175-36 Bushing Fork VT No. Finish
12-0526 63 34179-33 Nut, Bushing, 5 pack 17-0096
17-0906 64 34180-33 Lock Tab, 10 pack
37-8890 Chrome
17-0069 65 34182-76 Shifter Finger, Late 76-79 17-0432 Zinc
10-0725 68 34435-52 Shaft Bushing Footshifter models
10-0732 68 34430-36 Shaft Bushing Handshifter models only
Transmission Top Cover Screw Kit.
21-0202 69 34447-52 Chrome Lever Stock fasteners and special vent screw fits Big
21-0195 70 34447-74 FX Lever, Chrome Twin 4-Speed models.
17-9767 71 34453-52 Shifter Shaft
17-0073 72 34477-53 Shifter Pawl, Left
Chrome Cadmium Parkerized Year Type
Pair 73 34478-53 Shifter Pawl, Right 8147-13 8148-13 — 1936-78 Stock Slot
17-0068 74 34478-75 Shifter Pawl, Late 1975-Early 79 — 8148-13T* Note: Zinc 1936-78 Stock Slot
13-0133 75 34482-53 Pawl Spring, 10 pack
8750-14 — — 1936-64 Allen
17-0071 76 34488-52B Pawl Carrier
10-0726 77 34498-52 Pawl Bushing 9612-13 9613-13 9620-13 1936-55 Stock Oval
13-0134 78 34500-52A Carrier Spring, 10 pack 2103-13 2104-13 — 1950-53 Phillips Oval
17-0070 79 34525-54 Pawl Retainer 8748-12 8749-12 — 1965-79 Allen
17-0103 80 34551-52 Shifter Cover, Aluminum
17-0102 80 34551-52 Shifter Cover, Chrome Chrome Dust Shield and Shifter
15-0159 81 34552-52 Cover Gasket Lever Set complete with mounting
21-0200 82 34555-52 Chrome Cover hardware.
21-0201 83 34555-74 FX Chrome Cover
17-9895 84 34560-52 Adapter Plate VT No. Fits Type
21-0208
15-0160 87 34565-52 Plate Gasket 21-0210 21-0210 1952-E78 FL, Full
17-0050 95 34799-65 Shifter Top, Complete Covers Ratchet Drum
97 34803-59 Shifter Top, Bare
15-0161 98 34824-36 Top Gasket 21-0214 21-0208 1952-E79 FL Stock
21-0214 1974-E79 FX Stock
535
Shifter Fork
17-0132
17-0097
Shifter Fork Group
17-0114 Big Twin Transmission 1936-78 3 and 4 Speed.
VT No. OEM Item Note
17-0133 34030-36 Shifter Cam Shaft Hand Shifter
17-0134 34031-41 Shifter Cam Shaft Foot Shifter
14-0117 34036-36 Oil Seal 1936-79
17-0112 17-0113 14-0533 34036-80 Oil Seal 1980-85
Shifter Clutches for 1936-85 4-speed Big Twin. 17-0132 34050-36 Lockscrew Each
Sifton VT No. Andrews Fits 17-0135 34140-36 Shifter Fork Shaft 1936-76
17-0250 17-0112 17-8233 Countershaft, Large 1-2 17-0136 34145-76 Fork Shaft 1977-84
12-0939 11036 Snap Ring, Shaft 1977-84
17-0251 17-0113 17-8234 Mainshaft, Small 3-4
17-0115 34158-36 Shifter Fork Main
— 17-0114 Set of Clutches includes one each number 17-0116 34159-36 Shifter Fork Countershaft
17-9750 — Fork Set Andrews
17-0097 34165-36 Shifter Finger 1936-E76
17-9166 Finger Kit 1941-E76
17-9154
17-0069 34182-76 Shifter Finger Late 1976-E79
17-0117 34168-39 Finger Roller, pair 1939-78
17-0118 34168-52 Finger Roller, pair 1979-84
17-0096 34175-36 Finger Bushing 1936-84
12-0526 34179-33 Bushing Nut (5 pack) 1936-84
12-0702 6750 Fork Shim .005” 10 pack
10-1257 — Fork Shim .007” 10 pack
12-0703 6752 Fork Shim .015” 10 pack
17-9751 6754 Fork Shim ³/₃₂” 10 pack
Shifter Fork Shaft 10-0732 34430-36 Shaft Bushing Hand Shifter
Kits include shaft, 10-0725 34435-52 Shaft Bushing Foot Shifter
lock screw, finger, Shifter Fork Nut Kit includes two nuts,
rollers, seal, bush- two locks, fits 1936-84 3 and 4-speed
ing, nuts, locks, Big Twin and 1936-73 45’s.
shims and spacer VT No. 17-2121
for years listed. Steel Big Twin Shifter Forks for 1936-85 4-speed.
Order forks sepa- VT No. OEM Fits Brand
rately. 17-0115 34158-36 Mainshaft V-Twin
VT No. Years 17-0116 34159-36 Countershaft V-Twin
17-9154 1936-75 17-0122 Pair Set Sifton
17-9155 1976-78 17-9750 34158-36 Set Andrews
17-9156 1979-84 34159-36
Lock Tabs
17-2120 17-2122 Transmission Lock Kit contains lock tabs
and snap rings needed when rebuilding 74
and 80 4-speed transmission.
VT No. 17-0926
Lock Tab 70 Piece Assortment
for all Big Twin and XL’s contains
a greater quantity of more popular
type and is carded for display and
removal.
VT No. 17-0940
74 and 80 Transmission Hardware Kit includes all locks,
springs, keys, retaining rings and clips for all 4 speed, all the hard
to get small parts.
VT No. Fits Type
17-2120 1936-79 Ratchet Top
17-2122 1979-84 Rotary Top
536
4 Speed Transmission Gasket and Seal Kit
17-6008 17-6010 15-0614
17-6020
CLASSIC
17-6009 15-0783
Deluxe 4-Speed Transmission Gasket Kits include all seals,
corks, locks and gaskets as the factory number, the kit replaces.
Jims Hardware and Rebuild Kit includes bushings, locks, VT No. Years
keys and snap rings for completing a 4 speed transmission 15-0614 1936-79
rebuild. James gasket set included. 15-0783 1936-79
VT No. Years 15-0620 1980-84
14-0684 Big Twin 4-Speed Transmission Main Seal
17-6008 1936-76
Kit fits 1936-84. It includes seals for clutch
17-6009 1976-Early 77
hub, main drive gear, main shaft, cork and
17-6010 Late 1977-79
sprocket lock tab.
17-6020 1980-85
Sifton James Year
15-0608 15-0609 14-0684 15-1164 1936-79
— 15-1238 1980-81
— 15-1165 1982-84
17-0823 17-0766
4-Speed Mainshaft Spacer and Seal Kit includes coated

15-0610 seal, correct spacer, nut and locktab.
VT No. Years
17-0823 1937-76
17-0766 1937-76
17-0767 1977-78
17-0769 1979
15-0612
17-0768 1981-82
17-0770 1983-85
Transmission Gasket Sets. Complete gasket and oil seal kit
Reverse Kit fits 1939-52 EL,
listed below for individual application for 4 speed models.
1953-75 FL.
James GB No. OEM Year
VT No. 17-1495
15-0836 15-0608 33031-36 1936-64
15-0836 15-0609 33031-65 1965-69
15-0836 15-0610 33031-70 1970-79
15-0836 15-0612 33031-80 1980-85 Mainshaft Seals fits 1936-85, 74 and 80 4-speed models.
James VT No. OEM Years/Type
7805-2
14-0187 — 7805-2* 35230-39 1939-80 Kit, Complete
14-0637 14-0122 35230-39 1939-80 Double Lip
— 14-0187 35230-39 1939-80 Double Lip Coated
14-0645 14-0129 37741-67 1979-81 Rubber
14-0646 14-0130 37741-82 1981-85 Rubber
— 14-0576 — 1981-85 Metal
— 12-0207 35175-38 1938-77 Key
14-0638 14-0123 35231-36 1936-76 Cork
*Note: Kit includes key and cork.
537
4-Speed Kick Starter Kit
22-1042 22-1042
Installed
22-1020
22-1124
Installed
22-0834
22-1047
Heavy Duty Kick Start Kit features a chrome smooth thick wall
kick cover and heavy duty kick starter arm. Fits all 4-Speed Big
Twin 1936-84. Requires use of wafer type release bearing kit.
VT No. Item Year
22-1020 Kick Starter Kit 1936-84
22-0834 Kick Starter Kit 1941-84
18-3203 Release Kit 1936-64
18-3204 Release Kit 1965-69
18-3607 Release Kit 1970-84
22-0212
22-0302 17-0458
V-Twin Complete Kick Starter Kit fits 1936-84 models. Kit
includes a reinforced kick cover, chrome arm and all gears and
hardware to make conversion complete. Kit available with a
polished or chrome plated kick starter cover.
VT No. Type
22-0301 Chrome
22-0302 Polished Kick Starter Kit fits 1936-84 4 Speed Big Twin. Kit includes
*Note: When Installing any type of our 74-80 kick starter kits cast cover, black arm and parkerized nut set as shown and
on 1980-85 4-Speed, our VT No. 17-0101 late bearing retainer, comes partially assembled with finger shaft and clutch release
which incorporates a kick starter stop built in is required. finger. Kit also includes gasket and chrome hex nuts.
VT No. Year Type
22-1042 1941-64 Chrome
22-1124 1941-64 Replica
22-1047 1936-84 Replica
Our Original Kick Starter Kit Developed in 1979! 22-0212 1941-64 Replica
22-1157 1941-52 Replica
17-0458 1954-63 Replica
538
Kick Starter
Parts for
4-Speed
Big Twin
74” and 80” Kick Starter Parts listed below will fit 1936-84 3
and 4 Speed models.
VT No. # OEM Item
17-0301 1 33175-16B Kick Starter Pedal
17-0300 2 33175-16 Bicycle Pedal
28-0213 3 33182-63A Kick Starter Rubber
17-0306 4 33213-31 Pin Kit
17-0095 5 33068-54 Early Kick Starter Arm 17-0412 17-0271
CLASSIC
17-0312 6 33096-54A Kick Starter Shaft 17-0400 Big Twin Small Parts Only Kick Starter Kit contains parts
8120-3 7 33090-36 Spring Stud as pictured, ratchet gear set, 24T crank gear, kick starter shaft,
8120-3T 7 33090-36 Spring Stud
ratchet spring, lock tabs, nuts and key. Available with 14 or 16
13-0123 8 33085-36 Kick Starter Spring
tooth ratchet gear.
17-0413 9 33080-36 Thrust Washer
VT No. Ratchet Gear Type
14-0115 10 33076-37 Kick Starter Seal
17-0412 16 Tooth
10-0720 11 33288-37 Bushing Kit
17-0271 14 Tooth
43-0100 12 33277-36A Kick Starter Cover Sifton Kick Starter
15-0158 13 33295-36 Kick Starter Gasket Gear and Shaft
12-0500 14 7977 Mainshaft Nut Assembly includes
17-0903 15 33396-39 Mainshaft Lock
17-0399 large gear, correspond-
12-0206 16 33393-50 Key
ing shaft, nut, lock tab
17-0417 17 33381-39 Kick Starter Clutch Gear
and thrustwasher.
17-0403 17 33381-39 Kick Starter Clutch Gear 1939-74
VT No. 17-0335
17-0416 17 33560-75 Kick Starter Clutch Gear 1975-85
17-0400 19 33350-36 Crank Gear
17-0334 19 33350-36 Crank Gear, Sifton
17-0902 20 33082-16 Kick Starter Shaft Lock
12-0527 21 7911 Kick Starter Shaft Nut
13-0128 22 33391-36 Ratchet Spring
17-0401 17-0404 17-0405
10-0721 23 33438-50 Gear Bushing 17-0671
10-2486 23 As Above .005 Oversize Complete Kick Starter Ratchet Gear Kit contains ratchet
17-0401 24 33430-50 Starter Gear, 16 Tooth gear, clutch gear, spring and key way. It is available with 16 or
17-0402 24 33430-59 Starter Gear, 14 Tooth 14 tooth starter gear. Used on all 1936-85 4 Speed Big Twin.
Bumper Plate, Kick Starter for Big Twin. VT No. Type Year
17-0407 17-0408
VT No. OEM Fits 17-0404 16 Tooth Kit 1936-69
17-0407 33353-36 All 1941-75 17-0405 14 Tooth Kit 1936-69
17-0408 33353-78 1978-84 4 Speed 17-0671 14 Tooth Kit 1970-85 Note: Key way not included.
17-0324 17-0312
Kick Starter Bumper Plate Screws replace
1864B. Used on all 1936-85 Big Twins.
VT No. 17-0411
Big Twin Kick Starter Shaft replaces 33096-54A. Fits 1936-
17-0409 Oil Deflector Mainshaft Starter Gear 84 Big Twin.
replaces 33429-39, fits all 1941-79 Big VT No. Type
Twins. 33429-80 fits 1980-84 Big Twins. 17-0312 V-Twin™
VT No. OEM Fits Item 17-0317 Jims
17-0409 33429-39 1941-79 Big Twin Deflector 17-0324 Sifton
17-0410 33429-80 1980-84 Big Twin Deflector Longer Kick Start Shaft fits
37-9134 2333W 1941-79 Screw 1937-84 Big Twin 4-speed, elim-
37-9173 3789A 1980-84 Screw 17-0591 inates the use of fold out kick
starter arm. The stroker I-Beam or
other offset arms may be fitted.
17-0990 VT No. Brand
17-9145 Jims
17-0100 17-0591 Sifton
Replica Kicker Kit.
Kick Start Shaft with gear. Fits 1941-1964 FL.
17-0990 Kicker Kit
VT No. 17-0829
17-0100 Small Parts
539
4-Speed 8113-20
Transmission
12-2108
7112-19
Cap Acorn
Transmission Side Cover and Clutch Arm Nut Kit fits all
1936-84 Big Twins.
17-1488 VT No. Type Finish
4-Speed Kick Starter Cover Stud Set. 7112-19 Acorn Style Chrome
VT No. OEM Piece Years Type 8442-19 Cap Style Chrome
12-2108 33298-36 9 1936-64 VT 8113-20 Hex Stock Cadmium
17-1488 As Above Parkerized 8112-20 Hex Stock Chrome
17-1489 Zinc 9 1936-64 VT 8112-20T Hex Stock Chrome
12-2109 33298-36 7 1965-85 VT 9671-20 Hex Stock Parkerized
24823-80 2 9671-20T Hex Stock Parkerized
9637-13 33298-36 9 1936-84 Colony 8751-19 Extra Deep Thread for Long Studs on
24818-52 4 Parkerized late models Acorn style
8752-19 Same As Above, Cap Style
4-Speed A B
E
Trans
Plugs H
F
Transmission Fill Plugs. 8406-1 Chrome Oversized (F)

A. Fill Plug will fit all 1940-84 Big Twins. 8407-1 Cadmium Oversized (F)
VT No. Finish H. Replica Transmission Filler Plug is available in chrome
7351-2 Chrome plated steel or brushed aluminum. It fits 1958-80 Big Twins.
B. Cap Style Plug fits 1940-84. VT No. Finish Brand
8801-2 Chrome 9400-1 Chrome Colony
E.-F. Stock Plug is available in standard or oversize self tap- 9401-1 Aluminum Colony
ping. Fits 1936-up Big Twin. 37-9081 Chrome V-Twin
VT No. Finish Type 37-9080 Alloy V-Twin
8118-1 Chrome Standard (E)
7616-1 Cadmium Standard (E)
9700-1 Parkerized Standard (E)
Drain Plugs
37-0095
B
37-8934
A
Magnetic Drain Plugs prevent metal particles from circulating
Engine and Transmission Drain Plugs. through engine, transmission cases and oil tank.
A. Chrome dome head plug with an oversize thread and one VT No. OEM Size Use
tap for rethreading the stripped out drain hole. Fits 1965-up 37-0096 707 ¹⁄₂ - 13 74 Transmission
Overhead Valve Big Twin and 1967-up Sportster. 37-0097 700 ³⁄₈ - 24 Big Twin Case Plug 74 and 80
VT No. Type 37-0095 60348-65A ¹⁄₂ - 20 74 and 80 Inner Primary
7502-2 Plug and Tap 37-0098 720 ⁵⁄₈ - 18 Oil Tank and Time Hole
7503-1 Plug Only 37-8934 734-739 ¹⁄₈ - 27 NPT 1987-89 Big Twin Primary
B. Stock style of drain plug and brass gasket used on Sportster Transmission, FXST-FXR
37-0099 739A ¹⁄₈ - 27 NPT 1990-03 Big Twin
transmission and motor case also oil tank with 1/2”-13 thread.
Transmission
VT No. Finish 37-8961 718 ¹⁄₄ - 18 NPT Chain Cover
8494-1 Chrome 37-9217 722 ³⁄₈ - 18 FXR Drain
8494-1T Chrome
8495-1 Cadmium
15-0194 Brass Gasket
540
43-0148 43-0153 43-0982
4-Speed
Kick Starter Cover
Chrome Smooth Kick Starter
Inside
Cover for 1936-85 4-speed
Replica Cast Kick Starter Covers Big Twins. The cover is heavy
43-0982 for 1936-84 Big Twin 4-speed. die-cast with machined flat
VT No. OEM Years surface. It accepts allen screws
43-0148 33277-36 1951-67 for mounting and includes short
43-0153 33277-36 1937-50 finger shaft and finger. Use with
43-0982 33277-36A 1937-50 release bearing kits listed.
17-0882 Clutch Release Lever 43-0107
Bushing, 1936-52 EL, 1941-84 FL
17-0354 Cadmium Bushing VT No. Item
37-1212 Plug Set 43-0107 Chrome Cover
43-0100 8820-9 Allen Screws
43-0101
17-9923 Finger Shaft, Short
17-1499 Finger Only
CLASSIC
18-3203 Release Kit for 1936-64
43-0164 Big Twin 4 Speed
Kick Starter Covers for 1936-84 Big Twin 4-speeds include Transmission Side Cover
15-0158 15-1523 Gasket replaces 33295-36.
bushings installed.
VT No. OEM Type Years VT No. Type
43-0100 33277-36A Polished 1968-84 15-0158 GB
43-0101 33277-36A Chrome 1968-84 15-0769 GB, pair
43-0164 33276-70 Chrome Electric Start Only 15-1035 James
43-0194 33276-70 Polished Electric Start Only 15-0595 James, Silicone
15-1523 GB, Silicone
43-0161
Kick Starter Bushing fits 1941-84 Big
Twin 4 -Speed.
VT No. OEM Item
10-0720 33288-37 Kit
10-2107 Sifton Standard
43-0274 43-0274 Inside 10-2108 As Above .005”
Finned Kick Starter Cover with cast finish fits 1936-84 kick 14-0115 33076-37 Seal, 5 pack
starter Big Twins. Bushings and seal installed. 16-1732 — Installation Tool
VT No. Brand 2762-3 Kit Bushing Kit
43-0161 V-Twin Chrome Cover dresses up clutch arm on
43-0274 Sifton 1936-84 Big Twins. Acorn nut included.
VT No. 42-0527
Kicker Springs
13-9249 13-0945 8120-3T
Kicker Spring Studs fits 1936-84 Big Twin kick starter.

VT No. OEM Finish
13-0123
8119-1 33090-36 Chrome
Kick Starter Return Spring for all 1936-85 Big Twins. 8119-1T 33090-36 Chrome
VT No. OEM Finish 8120-1 33090-36 Cadmium
42-0217 9717-1 33090-36 Parkerized
13-0123 33085-36 Chrome
13-9249 33085-36 Black 9717-1T 33090-36 Parkerized
13-0045 33084-41 Black 8120-3 33152-59 With screw for attaching cover
13-0945 33085-36 Parkerized 8120-3T As Above
42-0217 33150-59 Chrome Cover 17-0601 Zinc Kick Starter Bolt Kit
17-0602 Chrome Kick Starter Bolt Kit
541
Kick Starter Arm 17-0307 17-9934 17-9981
Complete Kick Starter Arm And Pedal
Assembly Kit includes heavy forged offset
kick arm VT No. 17-0308, kick starter pedal
17-1543
17-0301 and necessary hardware for easy
installation.
VT No. Item
17-0309 17-0309 Kit Complete
17-0308 Kick Starter Arm Fold-Out Kick Starter Arms replace 33057-77, 1977-84 FX-XL
17-0301 Kick Starter Pedal models. The 17-9934 features flat kick starter pedal that spins.
17-0982 Arm Kit, SS Chrome Black Type
17-9150 Pedal Chrome Stroker Kick Starter Arm 17-0307 Stock
Only Kit includes I-Beam, 1” longer kick 17-9934 Flat Pedal Style
starter arm with rail type buffalo kick 17-9981 17-1543 Accepts fold out kick pedal, Retro Style
pedal and hardware.
17-9921 VT No. 17-9921 17-0095 17-0323
Complete Kit
17-0284 Stroker Kick Starter Arm

17-0160 features forged I-Beam profile
for unbreakable service. Fits
17-0384
1954-85 Big Twin.
VT No. Finish
17-0160 Chrome
17-0284 Polished Stainless
2894-7 17-0652
17-0018
FL Kicker Arm straight style

for 1954-69 FL, FX 1971-72,
to fit with stock 2:1 exhaust
Mounting Kits only; fits closer to chassis
2894-7 Parkerized and replaces 33068-54.
17-0308 17-0322 17-0344
2894-7T Parkerized VT No. Item
Kick Starter Arms are constructed of forged steel for durability 17-0095 Chrome
for 1954-84 FX-FL. 2895-7 Cadmium
2895-7T Zinc 17-0323 Black
VT No. OEM Finish Type 17-0652 Black Kit
2896-7 Chrome
17-0308 33052-71 Chrome Heavy 17-0384 Parkerized Kit
17-0310 As above Stainless Heavy 17-0048
17-0018 As Above Chrome Standard
17-0322 33052-71 Black Polished 17-0047
17-0344 Natural Replica Black
17-0601 Bolts Chrome Kit
17-0350
17-0351
Replica One Piece FL Kick Starter Arm is forged steel for
replacements on 1936-53 Big Twins.
VT No. OEM Years Finish
17-0048 33063-36A 1941-53 Chrome
17-0047 33063-36A 1941-53 Black
17-0350 33063-36 1936-40 Black
17-0351 33063-36 1936-40 Chrome
17-0290 Kit 1936-40 Black
Kick Starter
Kick Starter Arm Kit Arm Kit in-
VT No. 17-0260 cludes stain-
less steel arm,
chrome spring,
flat rubber pedal
and necessary
hardware.
Indian Larry Style I-beam Forged Construction Kick Starter
VT No. 17-0982
Arm is unbreakable featuring a polished hi-lited stainless steel
finish. Bottom allen cap screw clamps arm to kicker shaft. Top
pedal bolt is a countersunk allen. This design of the 1980's was
used by Larry on many builds. Fits 1954-1984 FL, 1971-1984
FX. VT No. 17-0285
542
17-0315 17-0261
Kick Starter Pedal
17-0331 17-0333
17-0301 17-0311 17-0332
Deco Plastic Kick Starter Pedal

VT No. Finish/Color
17-0331 Cadmium/Black
17-0333 Chrome/Black
17-0332 Chrome/Yellow
17-0972 17-0969
CLASSIC
17-0964
17-0283 17-2123 Kick Starter Pedal Parts.

17-0964 Black Pad Only
Kick Starter Rubber Pedal Assembly includes mount bolt pin
17-0972 Shaft Only, chrome
kit with bushing for one piece kick starter arms 1936-76 models.
17-0969 Shaft Only, parkerized
VT No. Item Color/Style
17-0975 Shaft and Mounting Kit
17-0315 Assembly Black/H-D
17-0261 Assembly Black/FLH V Style Logo 17-0355 17-0359
17-0301 Assembly Black
17-0311 Assembly White
17-0283 Pedal Kit Black, 45"
17-2123 Shaft Only
28-0213 28-0214 28-0005 28-0458 Kick Starter Pedal Assembly includes spring and collar to
reduce vibration of the pedal.
VT No. Finish/Color
17-0355 Bronze
Kick Starter Pedal Rubber. 17-0359 Cast Alloy
VT No. Color Style
28-0213 Black Chrome Flat Kick
28-0214 White Starter Pedals.
28-0005 Black 45" 17-0299 17-9150 VT No. Type
28-0458 Black FLH V Style Logo 17-0299 O-Ring
17-0302 17-0303 17-9150 Rail
Skeleton Kick Starter Pedal Assembly.

VT No. Style
17-0302 Chrome Skeleton
17-0303 Brass Skeleton
17-0378 Chrome Pedal Shaft for 17-0302
Pedal Pin Bolt Kit fits 1931 and later kick starter Twins. Each Maltese Kick Starter Pedal Assembly is
kit contains one of the following: 4336 pedal pin bolt, 33213- constructed of billet alloy with chrome axle
31 pedal pin bushing, 33215-30 spring washer and 7045 lock shaft. VT No. 17-0765
washer. 17-0306
VT No. OEM Item Red Baron Billet Kick Starter
17-0306 Complete Kit Pedal includes chrome axle shaft.
37-9060 Chrome Kit VT No. 17-0651
17-0771
17-0771 Replica Kit, each
37-0964 Chrome Kit, each Knuckle Alloy Kick Starter Pedal.
10-2494 33213-30 Bushing, 10 pack VT No. 17-0386
13-9184 33215-30 Spring Washer, 10 pack
2770-4 Kit Kick Starter Pedal Mt Kit, Parkerized
2771-4 Kit As Above, Chrome
543
Bicycle Style Kicker Pedals
17-0320 17-0252
17-0300 17-0044
17-0316 17-0321 17-0043 17-0041

Chrome Original Bicycle Style Rubber Kick Starter Pedal
and Axle Assembly are available in colors. Replace 33175-16A.
Includes bushing, bolt and spring clip. The pedal is chrome plat-
ed. We’ve Colorized The Classics!
Complete Pedal Rubber Only Color
Replica Bicycle Style Kick Start Pedal features black rubber 17-0300 28-0207 Black
blocks. 17-0044 Blue
VT No. Finish 17-0043 Red
17-0316 Parkerized Shaft Tube, Cadmium Side Plates 17-0041 28-0208 White
17-0320 Zinc 17-0971 Blue
Alloy Kick Starter
17-0321 Parkerized
Pedal Kit includes
17-0848 Nickel Plated
hardware.
17-0341 Parkerized
VT No. 17-0877
17-0252 Cadmium
17-0263 Nickel 17-0505
17-0832 17-0431 17-0979 17-0046 17-2124
17-0459 17-0461
Additional Parts Sold Separately 17-0831
17-0831 Inner Plate, Raw
17-0874 Inner Plate, Cadmium
17-0866 Inner Plate, Parkerized 17-0474 17-0343 17-0837
17-0832 Inner Tube Raw 17-0863
17-0330 Rod and Rubber Kit, 4 pc
17-0319 Center Axle
17-0626 End Cap Raw Spool Kick Starter Pedal. Order bolt kit separately except
17-0863 End Cap Cadmium 17-0874 where noted.
17-0832 Axle Tube Raw Black Chrome Brass Type/Note
17-0505 Rebuild Kit 17-0979 — — Spool w/bolt kit
17-0431 Pedal Stud Set 17-0046 17-2124 — Spool
17-0855 Parkerized Kit; cad outer cover, parkerized 17-0459 17-0461 17-0474 Holes
pedal axle, pedal bolt kit & related hardware. — — 17-0343 Swiss Cheese
— — 17-0837 Ventilated
17-0957* — — Hex *Note: Parkerized Finish
Mounting Kits.
Parkerized Cad Chrome
Rat-Trap Sifton Kick Starter 2894-7 2895-7 2896-7
Pedal is parkerized finish on
shaft and pedal. By Sifton
VT No. 17-0624
17-0955 17-0962 17-0606

Army Kicker Pedals are all steel construction, bicycle style
round pedals. Indian Larry Spool Kick Pedal includes a replica spool chrome
VT No. Type kick pedal with a spacer, lockwasher and spring washer.
17-0955 Parkerized Original hollow style like Larry used on his very first build.
17-0962 Chrome VT No. 17-0606
544
1941-Early 84 FL-FX Clutch Part
18-1134
18-1127
12-0161
CLASSIC
VT No. # OEM Item
37-8786 1 528 Cotter Pin, ³⁄₃₂ x ⁵⁄₈ VT No. # OEM Item
12-0900 1A 11000 Retaining Ring 17-0904 53 37503-41 Clutch Nut Lockwasher
12-0923 2 11096 Retaining Ring 12-0208 54 37523-15 Clutch Hub Key
12-1158 5 6320 Washer, ⁵⁄₁₆ x ¹¹⁄₁₆ x ¹⁄₁₆ 18-1125 55 37549-41 Hub Friction Disc Lining with Rivets
6 6402 Washer, ²⁵⁄₆₄ x ⁵⁵⁄₆₄ x ¹⁄₃₂ (2) 18-3153 56 37550-41A Clutch Hub Assembly including
12-9918 7 6443HW Washer, ¹³⁄₃₂ x ¹¹⁄₁₆ x ¹⁄₁₆ — 71 and 60 3-Stud
18 8226 Rivet, ³⁄₁₆ x ⁷⁄₃₂ (brass) (8) 18-3154 — As Above 5-Stud
12-0161 19 8856A Clutch Hub Bearing Ball 18-3151 56A 37550-41B Clutch Hub Bare 3-Stud
12-0344 19 9540A Clutch Hub Bearing Standard Roller 18-3150 — As Above 5-Stud
14-0103 21 12014 Mainshaft Nut Oil Seal 18-3612 19 37566-41A Clutch Hub Roller Retainer
18-1135 22 33163-65B Ring Gear & 57
41 33291-36 Upper Shaft Bushing 13-0138 58 37574-44 Hub Bearing Plate Spring
17-1509 42 37070-39 Release Finger 18-3613 59 37576-41 Hub Bearing Plate
17-1499 42 37070-39B Release Finger 12-0509 60 37581-47 Hub Stud Nut, Black
17-0124 43 37074-38 Release Lever (Shaft with pin) 12-0580 60 37581-47 Hub Stud Nut, Chrome
17-9827 43 37074-38A Release Lever (Shaft with snap) 18-3114 61 37583-41 Drive Hub Stud
18-3624 44 37228-75 Oil Slinger 18-3115 62 37585-41 Clutch Hub Pin
18-3117 45 37285-41 Clutch Pushrod 18-0152 63 37702-65 Clutch Shell with Starter Gear 1965-69
18-3118 37285-65 Clutch Pushrod 18-1134 63 37702-70A Clutch Shell with Starter Gear 1970-84
18-3119 37285-70 Clutch Pushrod 18-1149 63 37707-82 Clutch Shell, 1982-85
18-3120 37285-75 Clutch Pushrod with Rear Belt Drive
18-3121 46 37310-39 Pushrod Bearing Standard grade 18-3159 63 37703-41B Clutch Shell, Kick Starter only 1941-84
18-8229 37310-39 Pushrod Bearing OEM grade 18-1124 64 37850-41 Set of Lined Clutch Discs 1941-67
12-0342 46A 37312-75 Pushrod Bearing 18-1121 64 37930-68 Set of Lined Clutch Discs 1968-84
12-0370 46B 37313-80 Thrust Washer 18-1127 67 37871-41 Releasing Disc
— 47 37337-36 Pushrod Cork Oil Seal 18-1143 67 — As Above, Chrome
— 48 37348-41 Pushrod Oil Seal Spring 18-1126 70 37975-41 Drive Disc, Steel with rattler (each)
18-3202 49 37357-41 Pushrod Adjusting Screw 18-1129 70 37975-81 Drive Disc Steel, Smooth (each)
18-3201 37357-41A As Above with Ball End 18-3652 70 37975-81 As Above Barnett (each)
12-0514 50 37361-41 Adjusting Screw Nut 18-3111 71 38010-41 Pressure Plate, 3 hole
12-0785 50 As Above Chrome 18-3235 71 — As Above, Chrome
— 51 37496-41 Mainshaft Nut, Clutch Side 18-3112 71 — As Above, Black, 5-Hole
12-0508 51 37496-65 Mainshaft Nut, Clutch Side 18-3236 71 — As Above, Chrome
17-0121 51 Kit Nut-Seal-Lock 18-3113 71 — As Above, Black, 10-Hole
— 52 37498-41A Oil Seal Retaining Ring 13-0139 73 38075-41 Set of Clutch Springs 1941-67
13-0136 73 38075-68 Set of Clutch Springs 1968-84
Steel Plates. Note 18-8301 has smaller lug cut.
VT No. Style Year Brand
18-1129 Smooth 1941-84 York
18-8288 18-8301 18-1126 18-8287 18-8288 Smooth 1941-84 Alto
18-8301 Smooth 1941-84 York
18-1126 Rattler 1941-67 Replica
18-1129
18-8287 Rattler 1941-67 Alto
545
Clutch Pack 18-0101
18-0100
York Primary Drive Kit fits 1941-64 FL an

1936-52 EL models.
VT No. 18-0520
18-0517
Clutch Pack Kit for 1941-84 Big Twin fits 4-speed models. Kit
includes kick or electric clutch drum, 3 or 5 stud complete clutch
18-3234 hub, 4 steel and 5 fiber plates, clutch springs, outer clutch, releas-
ing disc and clutch hub nut with lock tab, key and seal.
York Clutch Assembly fits 1941-84 Big Twin with belt or chain VT No. Item Years Hub
drive in wet or dry clutch systems and offers multiple plate 18-0099* Kick only 1941-67 3
increase in friction. Kits include clutch hub, bearing, wet or dry 18-0101 Kick only 1941-84 5
clutch discs, diaphragm, spring, retainer pressure plate and 18-0170 Kick and Electric 1965-69 5
bolts. 18-0100 Kick and Electric 1970-84
VT No. Item with Rear Chain Drive
18-0517 Clutch Pack Assembly with heavy spring *Note: Features 3¹⁄₂” plate early clutch and steel plate with rattlers.
20-0759 Clutch Hub Nut Kit Power Clutch converts old style clutch
20-0516
16-0310 Puller Tool packs to smooth modern diaphragm spring
16-0556 Lock Plate Tool function. It is available for early chain and
18-3234 Replacement Clutch Spring belt drive with wet or dry clutch. Kit includes
20-0876 Pressure Plate clutch hub with bearing, clutch discs (friction
20-0871 Outer Plate and steel), diaphragm spring, spring retain-
er, pressure plate and four shoulder bolts. It
utilizes existing clutch basket.
18-0540 VT No. Year Item
20-0516 1936-84 Complete
18-0542 1936-84 Replacement Clutch Pak
Clutch Drums fit 1941-
84 kickstarter models.
Raw Chrome
18-3159 18-0526
Sifton Diaphragm Clutch Spring Pressure Plate for 1941-84 18-3159 18-0526
Big Twins. Includes 5-stud clutch, diaphragm spring, pressure
Barnett Scorpion Clutch Kit fea-
plate, rollers, adjustment screw and stud nuts. Use on all Big 18-3822 tures over twice as much friction
Twins 1941-64 with open primary and 1965-84 Big Twins with
surface area compared to stock
open or closed primary. It updates old style coil spring clutch to
clutch. All Scorpion clutches provide
new style diaphragm clutch for positive clutch engagement.
a positive engagement and release.
VT No. 18-0540
BDL Competitor Clutch Kit features Scorpion clutches incorporate 6
9 springs and shoulder bolts for simple heavy duty coil springs. In addition,
adjustment, large 40mm double row hub an extra spring set with a different
bearing, polished pressure plate and Kevlar spring rate is included which allows the clutch to be tuned for
clutch. street or race application depending on usage. Tunability is easy
20-0627
without removal of the primary cover. Barnett Friction Plates are
VT No. Fits compatible with any primary oil. Kit is designed to be used with
20-0627 1936-84 Big Twin with Belt or Primary Chain stock type clutch basket. Fits 1936-Early84.
Replacement Friction/Steel Sets for Above
18-0547 20-0627 VT No. 18-3822
546
Clutch Hub
Big Twin Stud Clutch Hub A 18-3151
fits 1941-Early 84 and fea-
tures 53 long rollers, outer
spring plate and nuts.
VT No. Stud
18-1216 5
18-1218 3
Clutch Hub Nut and Seal Kit for use on

all 1941-84 Big Twins. Includes nut, seal,
and lock tabs. Packaged. Big Twin Clutch Hubs for 1941-84 are available assembled
VT No. OEM Item with rollers, liner, top plate and adjusting nuts. They are also
17-0121 17-0121 Kit Complete available as bare hub only.
VT No. # Item B
14-0103 12014 Seal, 5 pack
12-0508 37496-65 Nut, each 18-3153 A Complete 3 Stud
17-0904 37503-41 Lock, 10 pack 18-3154 A Complete 5 Stud
CLASSIC
12-0208 37523-15 Key, 10 pack 18-3151* 3 Stud
17-0881 Kit Replica 18-3150* 5 Stud
17-0881 2548-8 Nut 18-3111 C Outer Plate 3 Hole, Black
18-3235 C As Above, Chrome
18-3112 C Outer Plate 5 Hole, Black
The Big Fixx for 74 and 80 Clutch
18-3236 C As Above, Chrome
contains 52 roller bearings which
18-3113 C Outer Plate 10 Hole, Black
take the place of the offset roller
18-1125 B Hub Liner, Stock with rivets
bearings and bearing retainer, result- C
*Note: Sold as bare hubs.
ing in a smoother more positive, wobble-free clutch operation.
VT No. 20-0229 Big Clutch Hub Hardware
Sifton Retainer Kit includes a Kit for 1941-84 includes
clutch drum retainer designed 20 rollers with cage, liner
to smooth clutch operation of with rivets, retainer springs,
all 1941-84. The retainer cures outer pressure plate with
the problem of the uncontrol- either 3 or 5 adjusting nuts.
lable “Grabby Clutch” found in VT No. Hub Type
the clutch system. 18-3638 3 Stud
VT No. Item 18-3639 5 Stud
18-3116 Retainer Kit
12-1195 Snap rings 13-0788 13-0789
18-3116
Installed
18-3116
20-0332 18-8242 Sifton Clutch Spring Sets are heavy duty ten piece sets with
red coating.
VT No. Fits
13-0788 1941-67
13-0789 1968-84
18-0795
2481-6 Nuts
Spring Collar Assembly for 1941-84 eliminates wobbly pres- 12-0509 Black
sure plate, gives a balanced spring load, providing a smooth 12-0580 Chrome
positive clutch operation with a minimum number of adjust- 12-0344 Rollers Only.
ments. The nuts go through the spring collar which strength- 20 Pack 100 Pack OEM Size
en and stabilize it. Assembly is available for 3 and 5 stud 12-0344 12-4590 9540A Standard
hubs. Outer spring plate is available separately.
VT No. Item
18-3611 Clutch Stud Nut and Plate Kit includes
20-0300 Kit, 3 Stud
18-8242 Plate, 3 Stud slotted nuts, roller retainer plate, outer pres-
18-0795 3 Piece Nut Set sure plate and retainer springs in proper
20-0332 Polished Outer Plate amounts for hubs listed 1941-84.
Chrome Clutch Spring Set for use on 1941-84, VT No. Item
when exposed on belt drive models. Ten pieces 18-3611 3 Stud, Stock
per kit. These are our late style springs with 18-3620 5 Stud
durable chrome finish. 18-3621 10 Stud
VT No. 13-0200
547
1936-40 Clutch
18-0453
49-0979
18-0341 18-0452
49-1160 18-0690
18-0871
Clutch release finger kit includes finger, oil slinger and correct
clutch springs for this application.
1936-40 EL
18-0453 Kit
12-0626 2426-2T 2452-2 18-0431 18-0435 18-0341 Parkerized Finger
18-0452 Parkerized Arm
18-0690 Throwout Bearing Kit
18-0871 Raw Oil Slinger
18-0563 49-0828 13-0402

18-0067
49-0366
1936-40 EL Replica Clutch Plate Set includes two external
tooth lined on both sides plates, one external tooth fiber plate,
two steel drive internal tooth plates, one spring plate with
j-slots, one clutch hub liner with four rivets.
VT No. OEM Year
49-0979 Clutch Kit and Tool
49-1160 Plate Set
12-0626 Hub Nut
2426-2 Pushrod Adjuster Screw
2426-2T Pushrod Adjuster Screw
2452-2 Adjusting Nut and Lockwasher
18-0431 2547-36 Clutch Spring Collar
18-0435 2489-36 Clutch Drive Disc w/Studs
18-0563 2472-36 Clutch Hub w/thrust plate
49-0820 2493-36 Clutch Shell Inner Race
49-0828 2039-36 Clutch Drum Shell w/sprocket
49-0036 Clutch Drum Kit
13-0402 Spring Set
18-0067 Clutch Hub Bearing Kit
18-0823 Hub Nut Spring Kit
49-0829 2550-36 Pushrod Thrust Plate for Clutch
49-0366 Tool, T-Bar
16-0373 Tool, Socket
548
18-1124 18-1121
Clutch Set
Extreme Duty Police Service Clutch Set is an original molded

fiber over metal replacement clutch set for Big Twins 1936-84. It
is superior to stock or competition units in that fiber is integrally
molded to plates, not glued on and holds constant thickness
under heat. The1968-84 type is also available bonded to alloy
plate for lighter weight. Use steel plate VT No. 18-3652 when
installing. 18-3644
VT No. Years Type Plates Material
18-1124 1936-67 Steel 3¹⁄₂ Fiber
18-1121 1968-84 Steel 5 Fiber
18-0150 1968-84 Steel 5 V-Prene
18-1122 1968-84 Alloy 5 Fiber
Steel Plates. Note 18-8301 has smaller lug cut.
CLASSIC
VT No. Style Year Brand 18-1129 18-8288
18-1129 Smooth 41-84 York
18-8288 Smooth 41-84 Alto
18-8301 Smooth 41-84 York
18-1126 Rattler 41-67 Replica
18-8287 Rattler 41-67 Alto 18-3664
V-Prene Clutch Kit for 1941-84 Big
Twin includes 5 friction and 4 steel
plates.
VT No. 18-0172
Red Eagle Clutch Set by Alto is avail-

able in fibers and steel. Sold as V-Prene
or Red Eagle type. Both are bonded to
steel. 18-3649
Clutch Pak-Kit. Heavy duty factory type for Big Twins.
VT No. Year Type Complete kit includes our five piece original bonded to steel
18-0225 1941-83 Carbonite police clutch or Kevlar friction and four steel plates, clutch hub
18-8277 1941-67 Red Eagle, requires extra steel plate liner with rivets, and ten springs. VT No. 18-3664 includes 3¹⁄₂
18-8279 1968-83 Red Eagle bonded plates and three steel plates with rattlers, springs and
18-8280 1968-83 V-Prene hub liner.
VT No. Item Year Type
Series K Clutch performs 18-3664 Original Police 1941-67 Dry
flawlessly under extreme 18-3644 Original Police 1941-84 Dry
heat conditions with 18-3649 Veloprene Fiber 1968-84 Wet/Dry
smooth precise shifting.
The steel backing plates
have maximum strength 18-0151
and V-Prene friction plate
is the most durable friction
material made.
Fits 1941-83. Note: Made to run wet or dry in a sealed primary.
Incidental oil from primary chain will not affect clutch operation.
One extra steel plate is required for 1967 and older models.
Rivets are sold in a pack of 25.
VT No. Item Year
18-3667 Kit
37-8808 Long Brass Clutch Rivets 1941-84
37-8807 Short Brass Clutch Rivets 1941-84
37-0477 Brass Clutch Rivets 1941-73 18-0157
Carbon Fiber Clutch Sets by Replica Dry Clutch 3¹⁄₂ Plate Set for 1941-67 Big Twin
Barnett features good energy includes linings riveted on with flex grooves in the outer plate.
absorption. For wet or dry prima- Replaces 37930-41 and 37950-41.
ry. Fits 1941-83. VT No. Brand
VT No. 18-3692 18-0151 Replica
18-0157 VT
549
Clutch Release 4-Speed/Throw-Out
Clutch Release
Rebuild for 1970-84
4-speed Big Twins
includes parts shown
plus a heavy duty
throw out bearing,
Late Type Throw-Out Bearing Kit includes parts pictured to with matching release
replace stock components on 4-speed Big Twins or as retro fit finger and shaft.
on earlier models. VT No. 17-0610
Kit Years Rod Only 18-3256
18-3203 1936-64
18-3204 1965-69 18-3265
18-3607 1970-85 18-3120
Throw-Out Bearing for 1975-up includes
two 37313-80 thrust washers, 37312-75
bearing, and retaining ring 11096. Use on
all 1975-up Big Twins.
VT No. Item Heavy-Duty Throw-out Bearing Kit is for all 4-speed Big Twin
18-3623 Kit models 1970-84. The kit includes a solid throwout bearing of 24
12-0342 Bearing Only mm diameter (Stock is 17 mm) with larger thrust washers, an
18-3623 12-0923 Retainer, 10 pack oil slinger and small parts.
12-0370 Thrust Washer, 5 pack VT No. Item
Clutch Push Rod Snap Ring for 1975-up 18-3256 Rebuild Kit
Big Twins, replaces 11096 in stock or full 18-3247 Bearing 24mm only
external configuration. 18-3624 Slinger Only, Steel
VT No. Type 18-3724 Washer Set
12-0923 “C” Type, Stock 18-0261 Bearing Kit
12-9992 Full External Type
Early Throw-Out Bearing replaces 18-3119
37310-39 on 1936-70 Big Twins in
standard or Replica grade quality. 18-3120
VT No. Type
18-3121 Standard 18-0745
18-3121
18-8229 Replica Grade
Throw-Out Bearing Conversion
Kit includes clutch pushrod, gas- Clutch Push Rods are for Big Twin 3 and 4-speed high strength.
ket, throw-out bearing and gear. VT No. OEM Years Length
Converts late bearings to old-style 18-3117 37285-41 1941-64 13”
heavy-duty throw-out bearings. 18-3118 37285-65 1965-69 13¹/₄”
VT No. Year 18-3119 37285-70 1970-75 13⁷/₈”
18-3608 1941-61 18-3120 37285-75 1975-84 13³/₄”
18-3610 1965-69 18-0745 Replica 1975-84 13³/₄”
18-3609 1970-84
Clutch Push Rod Adjuster Kit includes
Tamer Clutch Hub Retainer Kit
screw and nut.
eliminates all clutch drag and lung- 37-1957 VT No. Type
ing while in gear or while stopped.
37-1955 Replica
This kit greatly reduces gear clash, 37-1955
37-1957 Ball
and increases clutch and transmis-
sion life by providing a clean and 13-0200
free clutch release. The kit fits all 13-0136
1941-84 Big Twin with belt or chain
drive. Instructions included.
VT No. 18-1112
Clutch Spring Sets

VT No. Year Brand
13-0163 1968-84 BTE
13-0172 1941-67 BTE
13-0139 1941-67 York
13-0136 1968-84 York
13-0200 1941-84 Chrome
13-9228 1941-84 BTE
550
Clutch Release 4-Speed
A 18-3606 18-3627
C
B
18-3603
Clutch Lever Rods And Hardware. 18-3605

Cad Chrome # OEM Years Item
Foot Clutch 18-3626
18-0575 Cad 36917-36 1936-51 Rod
18-8302 18-3614 A 36918-36 1936-64 Rod 18-3604
18-8304 18-3617 B 36916-36 1936-65 Rod End
18-0432 — B 36916-36 1936-39 Rod End
— 49-0046 36916-36 1936-73 Rod End, Parkerized 18-0452
CLASSIC
7819-4 21-0205 C 33879-36 All Rod End Bolt
49-1372 — B 36916-36 1936-65 Rod End
18-8329 — Rod End Chrome Clutch Release Levers 1936-84 4-Speed Big Twins.
18-0432 — Rod End Cad VT No. OEM Year/Type
Mouse Trap 18-3606 37052-65 1965-78 Aluminum Primary
18-8303 18-3615 A 36918-52 1952-67 Rod 18-3627 37053-68 1968-Early78 FLH, 1971-Early79 FX
18-1224 18-3629 A 36918-65 1965-67 Rod 18-3605 37054-79 1979-84 FL, 1979-85 FX
18-1223 18-3616 A 36917-65 1965-84 Rod 18-3603 37051-36 1936-64 FLH
18-8305 18-3633 B 36916-52 1952-67 Rod End 18-3626 37051-36 As Above Parkerized
— 42-0302 D 38495-52 1952-67 Cover 18-0452 37051-36 1936-39 Raw UL, EL
9204-3 9203-3 C 36921-52 All Rod End Bolt 18-3604 Eliminator 1936-78 FX, FL
C 18-0850 Cadmium 1936-39 EL, UL
A B D 18-3702 1936-64, Pack of 2
Note: VT No. 18-3606 clears alloy primary on 1965-78 for
Clutch Cable Release Brackets. mousetrap or police jockey clutch. VT No. 18-3604 is for install-
VT No. # OEM Type Finish ing a mousetrap eliminator cable on 1936-78, clears wrap
18-3602 A Eliminator Mousetrap Zinc around oil tank.
18-3601 B Short 1968-79 Chrome, Bent down
18-8309 C Short As Above Chrome, Bent up A B
18-3600 D 62576-65A 1965-78 Chrome C
18-8252 D 62576-79 1979-84 Chrome
Note: A is mousetrap eliminator bracket. It extends out from stock
wrap around oil tank on 1936-64, for best results cut and redrill D E
18-0341
clutch arm 2” shorter. B and C are for 1941-79 models when using
18-3604 arm. D is the stock type which acts as cable bracket and Finger Shafts are for clutch
oil tank mount. release levers on 1939-84
Mousetrap Eliminator Kit 4-Speed models. Shafts are for
includes bracket, handle, early cotter type or late snap ring
type. 17-0970
cable, clutch set and springs
for 1952-79 Big Twin mod- VT No. # OEM Item
els. 17-0124 A 37074-38 Early shaft cotter type
VT No. 22-0750 17-0970 Clutch Release Finger Shaft Kit
17-9827 B 37074-38A Clutch lever release shaft w/snap ring
18-0341 Finger, 1936-38
17-1509 C 37070-39 Finger, 1939-74
Mousetrap Eliminator 17-1499 D 37070-39B Finger, 1975-84
20-0304 Soft Pull Conversion 12-0900 E 11000 Snap Ring, 10 pack
Kit features soft pull by 17-9923 VT Finger Shaft, Short for
elimination of mousetrap 43-0107 Kick Cover
linkage by using the late 12-9918 6443HW Thrust Washer
model cable and shorter 12-1158 6320 Lower Washer
arm for 1952-78 Big Twin 16-1800 — Reamer for Finger Shaft
models. 17-0354 Bushing
Chrome Clutch Release Cover dress-
es up clutch arm on 1936-84 Big Twins.
VT No. Item Acorn nut included.
20-0304 Kit VT No. 42-0527
18-3601 Short Bracket
18-3604 Short Arm
551
Engine Sprocket 1970-83 Big Twin Compensator Engine
Sprockets
VT No. Teeth Type
Solid Engine
Sprocket 19-0379 22 FLH-FXE
Conversion 19-0379 19-0071 24 FLH-FXE
Kit includes
Big Twin Offset Engine Sprockets with
solid splined spline.
sprocket, 24T 25T Offset
19-0425
engine nut with 19-0104 — ³⁄₄”
lock tab, engine seal spacer and shims. This kit will replace 19-0105 19-0161 1”
the entire compensator motor sprocket assembly. 19-0106 19-0162 1¹⁄₄”
VT No. Fits Teeth 17-0945 17-0945 Nut Kit
19-0445 1970-84 FX-FL 22T
19-0423 1970-84 FX-FL 23T Spline Taper
19-0424 1970-84 FX-FL 24T
19-0425 1970-84 FX-FL 25T
19-0137
19-0404 10-0428 19-0054
Engine Sprockets 12-0503

Spline Taper Tapered Tapered Teeth
1955-up 1930-54 Kits
19-0145 19
19-0146 20
19-0147 21
17-0945
Compensator Sprocket Kit includes all parts pictured with 19-0050 19-0054 19-0148 19-0138 22
24T sprocket. Fits 1970-84 FLH-FXE-FLT-FXR. 19-0051 19-0055 19-0149 19-0137 23
VT No. 19-0404 19-0141 23
Order spacer and shims separately. 19-0142 23
VT No. OEM Year Size Item 19-0052 19-0056 19-0150 19-0139 24
10-0427 24002-70 1970-up Spacer 19-0053 19-0140 25
10-0428 24032-70 1970-up .060” Shim 12-0200 Key
24033-70 1970-up .090” Shim 17-0945 12-0503 Nut
24034-70 1970-up .120” Shim
Chrome Sprockets.
24035-70 1970-up .150” Shim 19-0492 — 24
24036-70 1970-up .180” Shim — 19-0075 23
Set of 6 24037-70 1970-up .210” Shim Compensator Sprocket Engine Nuts.
19-0117 VT No. Year Type
12-0506 1970-90 Replica
12-1946 1970-90 Chrome
19-0119 Engine Sprocket Nut Kit includes correct nut,
key retaining ring and left bearing oil slinger.
Compensator Sprocket Parts.
Kit Nut Fits
VT No. # OEM Year
12-0620 12-0503 1941-54 Big Twin
19-0071 D 40275-70 Sprocket 1970-84 24 Teeth
12-0619 12-0501 1929-73 45
19-0116 E 40299-70 Slide cam 1973-83 12-0620
12-0633 1941-54 Slinger
19-0117 B 40324-70 Cup 1970-83
19-0118 F 40375-70 Extension 1970-85 E
19-0119 A 40384-70 Retainer 1970-83 A F
and Cover
12-0506 C 40392-70 Nut 1970-90 D
19-0046 B
Sprocket Nut and Lock Tab Set for 1955-
up Big Twins allows locking of nut by utiliz-
ing 2 tabs which fit into sprocket holes when C
17-0945
non-compensator sprocket is used.
12-0504 VT No. Item
17-0945 Kit
12-0504 Nut Only
Acorn Engine Nuts for all Big Twin.
VT No. Fits
7107-1 1936-54 Compensator Parts for 1955-69 Big Twins.
7816-1 VT No. # OEM Item
7816-1 1955-76
19-0046 Kit ABCDEF Complete Kit
Chrome Pike Engine Nut fits Big Twin 1955-up 13-9238 A 40302-55 Spring
sprocket shaft. 19-0391 B 40385-55 Nut
37-0890 VT No. 37-0890 12-0210 C 40390-54 Key
19-0044 D 40275-55A 24T Sprocket
552 19-0406 E 40292-55A Slide Cam
19-0045 F — Sprocket Shaft Extension
Primary Chain Tensioner
19-0272 York Big Twin Hydraulic
Primary Chain
TensionatorTM features
a hydraulic valve which
controls the motion of the
submerged piston which
constantly keeps the
chain in tension for 1965-
06 Big Twins.
VT No. Item
18-0120 Kit
18-0128 Shoe
19-0765
18-8247
J I
CLASSIC
A
G C
Primary Chain and B
Sprocket Kit includes
a 23 tooth motor E
sprocket, and a York
oval style 82 link prima- F H
ry chain.
VT No. Item
19-0272 1941-54 18-8314
19-0770 18-8314
19-0765 1955-69
19-0770 1970-85
Chain Tensioner Parts fit Big Twin models.

18-0581 Installed VT No. # OEM Type Year
18-0581 18-8314 All Complete Kit 1985-99
18-0581 18-3217 B-C-F-G Hardware Kit
Installed 37-9030 A 1783 Screw, 10 pack
37-8801 B 3862B Bolt, 5 pack
18-3682* C 4401W Hex Bolt, each
28-0225 E 39976-65B Nylon Pad 1965-00
28-0568 E — Red Nylon Pad
17-0915 G 39996-65 Lock, 10 pack
18-3218 H 39990-65 Shoe Mount Bracket 1965-00
18-3219 F 39993-65 Plate
York Chain Adjuster Kits fea-
18-3622 I 39992-65A Nut and
ture automatic self adjusting by
J 39998-65 Anchor Plate includes also
use of spring loaded shoe.
18-3634 J — Anchor Plate with carriage bolt (K)
VT No. Year
37-8802 K 5444 Carriage Bolt, 5 pack
18-0580 1965-00
18-0581 2001-06 18-3223 I 39992-65A Nut Only
37-0670 L Nyloc Nuts
Self Adjusting Chain 37-9277 M Washers
Tensioner fits models with wet *Note: Early style hex bolt screws into 18-3223 nut.
clutch. The tensioner replaces Primary Chain Nylon Liners.
28-0225
factory type detent adjuster shoe VT No. OEM Year
assembly. Tensioner kit includes 28-0233 39976-65 1965
all hardware and instructions for 28-0225 39976-65B 1966-84
complete conversion. Fits 1965- 28-0568 28-0568 Red 1966-84
2000.
18-0580
VT No. 18-0580
553
Primary Chain Replica Primary
Chain features
Figure ‘8’ Side
Primary Chain Drive System Plates for
18-0106 1970-84 Type 19-0367 reduced weight
on Early models!
19-0360
19-0363 19-0364
Diamond Endless Primary Chains.
VT No. Size Fits
19-0367 428 x 2 x 82 1936-64 Big Twin 74 and 80, Figure 8
19-0360 428 x 2 x 82 1965-84 Big Twin (Oval)
Primary Chain Drive Systems for Big Twins include 76 or 82
19-0392 428 x 2 x 80 Special Length
link primary chain, chain shoe adjuster assembly, clutch drum
19-0363 35 x 3 x 92 1952-56 K-Model
basket with starter ring gear and steel and fiber clutch plates with
19-0364 35 x 2 x 96 1938-up Servi-Car
pressure plate assembly. Correct front compensator sprocket
19-0365 35 x 2 x 100 1929-52 Solo
assembly includes all parts necessary for installation, including
19-0366 428 x 2 x 88 1930-36 VL Side Car
sprocket nut. Big Twin 5 Speed Softail models and all pre1985
19-0380 428 x 2 x 90 1930-36 VL Solo
FLH-FX 4-Speeds require 82 link primary chains; 1980-up FLT-
19-0361 428 x 2 x 76 1974-06 FLT/FXR
FXR 5-Speeds require 76 link primary chains. Primary Chain Connector Links are sold each for
82 Links 76 Links Year size 428 x 2 chain. Fits all Big Twins.
18-0106* 18-0110* 1970-84 VT No. 19-0377
18-0107* — 1965-69
18-0108* — 1955-64
18-0117 — 1955-64
18-0109 — 1936-54
*Note: Units include compensator front sprocket assembly.
19-0878
Primary Hardware 19-0876 19-0877
TYK Brand Primary Chains.
VT No. Links Fits
42-0653 40-9983 19-0878 76 1979-06 FLT, 1982-94 FXR
19-0876 82 1936-06 FL-FX
19-0877 82 Nickel Plated
40-9984 19-0934 82 1936-64 FL, 1936-84 EL
19-0933 84 1941-84 FL 19-0934
40-0835 19-0371 82 1941-84 FL
19-0941 82 1941-64 FL (York)
19-0845 82 1965-84 Big Twin
19-0588 1936-52 EL
1954-64 Rear Chain Oiler Kit for 1954-64 replaces 63591- 19-0918 96 1937-73 G 19-0941
62 to fit on rear of inner primary cover. Kit includes screw.
VT No. Item 18-0963 18-0964
42-0653 Rear Chain Oiler
40-0176 Oil Fitting
40-9983 Oil Drain 1936-57
40-9984 Oil Drain 1958-64
42-0589 Oil Guard
40-0835 Drain Fitting
10-0835 Oil Tank Fittings
Chrome Primary Drive for 4-Speed Kick Start models includes
Rear Chain Oiler Fitting fits 1941- chrome 24T motor sprocket, nut, clutch drum, chrome clutch
69 FL, zinc. Fitting is positioned springs, chrome pressure plate and chrome spring plate. Fits
between the oil pressure gauge and 1941-84 FL and 1971-84 FX.
oil pump fitting. VT No. 12-1280 VT No. Fits Shaft
18-0963 1955-84 Splined
18-0964 1941-54 Tapered
554
19-0447 Drive Chain and Sprocket
Spacer Kit is used for installing
extra wide rear tires or wheels
Trans Sprocket
on 1973-85 4-Speed FX-FL A B C
models. Includes special offset
transmission sprocket, machined
and chromed rear sprocket spac-
er-plate and 5 extra long sprocket 19-0086
19-0081 19-0077
mount bolts and nylock nuts.
Big Twin Countershaft Sprockets machined of durable steel.
VT No. Item Teeth Sprocket Offset # Teeth 1936-79 1980-85 1980-85
19-0399 Sprocket Only 22 .500 FL-FX FL-FX FXR-FLT
19-0447 Sprocket Kit 23 .255 4-Speed (A) 4-Speed (B) 5-Speed (C)
20 19-0076 — —
Rotor Spacers provide offset when required, with ⁷⁄₁₆” bolt 22 19-0081 19-0086* 19-0077*
holes. Each disc measures 2¹⁄₁₆” inner diameter with 4⁵⁄₁₆” out- 23 19-0082 19-0087* 19-0078*
side diameter. For 1980-99. 19-0412 24 19-0083 19-0088* 19-0079*
23-0320* ¹⁄₁₆” Steel 25 19-0084 — 19-0100*
19-0128 ³⁄₁₆” Steel 26 19-0085 — —
CLASSIC
19-0452 ³⁄₁₆” Billet *Note: “C” type uses allen screw to lock sprocket nut in place,
19-0413 ¹⁄₄” Steel “B” type use VT No. 17-0905 lock tab and “A” type uses
19-0414 ⁵⁄₁₆” Steel 17-0901 lock tab.
*Note: Use when installing flat rotor on 1973-75 Big Twin.
Rear Chain Tensioner by LBV reduces chain vibration and
19-0431 frequency of adjustment by utilizing a durable urethane roller
which revolves on sealed bearings mounted on chrome anchor
plates.
VT No. Year Model
19-0431 1973-85 FL-FXE-FXWG
19-0436 Roller only All
Sprocket Nut
17-1498 17-9759
Super-Nuts both have built-in seal for

Lock “N” Seal includes deflector, lock mainshaft surface. Duo-Nut features double 17-0204
washer and nut with built-in seal for all action sealing by use of the mainshaft seal Oil Deflector Main Drive Gear Kit.
1941-64 74” models. and an O-Ring recessed on the back side Includes all parts pictured to fit 1936-64 3
VT No. 17-9768 of nut. and 4-Speed models. Replaces 35211-36
Oil Deflector Main Drive Gear VT No. Type lock nut. VT No. 17-0204
Kit. Includes all parts pictured 17-1498 Super-Nut Duo-Seal Super Nut Kit
to fit 1936-64 3 and 4-Speed 17-9759 Duo-Seal Nut includes a nut with seal
models. 14-0120 Seal Only, 5 pack and O-ring on back side,
VT No. OEM Item 14-0685 As Above, James with lock tab for 1941-84
17-0204 Kit All
Big Twins.
17-0205 35159-39 Deflector
17-1490 VT No. 17-1490
17-0901 35216-36 Lock Washer, 10 pack
8408-1 35211-36 Lock Nut
12-0515 35211-36 Lock Nut
48-0498 48-0470 48-0030 48-0033 48-0025 48-0044 48-0048 48-0372 48-1824


555
Rear Sprocket Offset is measured from
bolt hole surface to center
line of teeth.
19-0121
19-0043 19-0041
19-0042 19-0124
1973-84 Big Twin, 1979-81 XL Rear Sprockets. Replace

OEM 41470-73. Used on all 1973-86 FX, FXE, FXEF, FXWG,
FXST, FL and FLH, 1979-81 Classic, cast or wire wheel. Dish
type sprocket with 9.8 mm offset.
Zinc Chrome Teeth
— 19-0047 43 Chrome Sprockets have a 6 mm offset.
— 19-0032 45 9.8mm VT No. Teeth
Offset
19-0048 — 46 19-0043 51 6 mm
— 19-0037 48 Flat Sprockets Offset
— 19-0039 49 19-0120 48
19-0040 19-0041 51 19-0124 49
1982-84 FXR with chrome finish. 16mm offset. 19-0121 51
VT No. OEM Teeth Chrome Lazer Design Rear
19-0020 46 Sprockets with 9.8mm offset for
19-0021 40954-81 48 Note: Sprocket offset 1973-84 FX-FL or flat.
measured from bolt Offset Flat Teeth
19-0022 40954-83 51
mount surface to center
of teeth. 19-0130 19-0133 49
19-0134 51
1980-99
Pulley Spacers provide offset when required, with ⁷⁄₁₆” bolt
holes. Each disc measures 2¹⁄₁₆” inner diameter with 4⁵⁄₁₆” out-
side diameter. For 1980-99.
23-0320* ¹⁄₁₆” Steel
19-0128 ³⁄₁₆” Steel
19-0672 19-0673 19-0452 ³⁄₁₆” Billet
Chrome 5-Spoke Sprockets. Offset models have 9.8mm off- 19-0413 ¹⁄₄” Steel 19-0414
set. 19-0414 ⁵⁄₁₆” Steel
Offset Flat Teeth *Note: Use when installing flat rotor on 1973-75 Big Twin.
1973-99
19-0672 19-0674 48 9.8mm Rear Sprocket Kits replacements for
brake drums with rivet on sprockets.
Offset
19-0673 19-0675 51 Includes rivet and dowels.
19-0012
Complete Dowel Pin Sets are for each
specific application.
VT No. Year Fitment
19-0110 1930-59 Mechanical and Hyd. Kit VT No. OEM Teeth Years Model
19-0115 1935-52 45 Solo Kit 19-0012 41470-30 51 1930-57 Rigid Big Twin
19-0110 19-0113 1967-72 Hydraulic Kit except 1936 OHV
19-0015 41420-30 Dust Ring Rigid Big Twin Zinc
Rivet Set will cap head 19-0408 As Above Dust Ring Rigid Big Twin Raw
of solid steel rivets for ³⁄₈ 19-0000 Kit 51 1930-57 Big Twin with ring
round head size. 19-0001 41470-58 51 1958-61 Big Twin
16-0337 VT No. 19-0002 41470-62 51 1962-66 Big Twin
16-0709 Tool 19-0003 41470-67 51 1967-72 Big Twin
16-0337 Set, Parkerized *Note: Order dust ring separately.
556
530 Standard
Diamond is the
mainstay of the
Chain
motorcycle chain.
530 Sigma O-Ring Chain with 10,600 lbs.
tensile strength, features heavy-duty, wide- VT No. Links VT No. Links
waist link plates for increased durability. 19-0320 100 19-0327 108
150 link. VT No. 19-0555 19-0321 102 19-0324 110 19-0725 19-0726
19-0322 104 19-0325 112
19-0323 106 19-0326 120
530 XDL Self
Lube eliminates
Diamond Spare the possibility of
Parts Kit includes hit and miss lubri-
two master links, cation, as it has a
constant and consistent lubrication in the 19-0458
one link and one
offset link for all 530 pin bushing (wear) area.
heavy-duty chain. VT No. Link VT No. Link
19-0330 100 19-0334 108
CLASSIC
VT No. 19-0352
19-0331 102 19-0335 110
Master Links. Replacement link for #50 19-0332 104 19-0336 112
530 chain. Note: sold in 10 packs unless 19-0333 106 19-0337 120
noted otherwise. 530 XLO Diamond
VT No. Fits Chain Type O-Ring Chain
19-0723
19-0350 Standard includes a .214 pin
19-0351 Nickel which has been
19-0375 XDL Self Lube produced using a
19-0353 XLO O-Ring, each special alloy steel and case hardened for
19-0376 N.O.S. Repair Link with 2 optimum strength.
Masterlinks OEM, 40052-15 VT No. Links 19-0349 108
19-0354 102 19-0357 110 19-0823
19-0355 104 19-0358 112
19-0348 106 19-0398 120
530 Diamond
Nickel Plated
Chain offers rust-
proof protection V-Twin Chain is 120 links by 530.
along with a nickel finish. Each part of the VT No. Finish Type
nickel plated chain is individually plated 19-0725 Nickel STD
before assembly Size 50ENP. 19-0726 Parkerized STD
VT No. Links 19-0457 Natural Heavy Duty
19-0341 102 19-0458 Natural O-Ring
19-0342 104 19-0823 Silver O-Ring
19-0347 120 19-0824 Nickel O-Ring
19-0832 Chrome Heavy Duty
Rear Sprocket Bolt

8835-10 Wheel Type Drive Type
Year Style Nuts/Washer
Cast Spoke Belt Chain
FLH-FX-FXST-FLST
1973-85 37-8131 • Hex •
37-8131 9609-15 1973-98 8834-10 • Allen •
1973-98 8835-10 • Allen •
1973-98 9608-10 9609-15 • • Dome • •
1973-85 9856-15 • Collar • •
1973-up 9857-10 Collar •
FLT
9857-10 1980-84 8836-10 • Acorn •
Buttonhead Allen Screw Set.

VT No. Thread
37-8671 Pulley Bolt Set with washers and wrench
37-9236 3/8 X 16 X 1"
557
Belt Drive Note: No warranty on belts sold when as part of kit or individual replacements.
20-0615
20-0621
BDL 8mm Belt Drive avail-

able in 1¹⁄₂”, 2” and 3” for BDL 11mm 11/2” Belt Drive Fits 1936-84 4-Speed Big Twin
all 1936-84 Big Twins with with kick or electric starter and can be used with stock clutch
4-Speed Transmission with or BDL Competitor Clutch. All 1965-up Drives include idler
Kick start on electric start. bearing assembly.
Can be used with stock type Kick Starter Only
clutch or BDL Competitor VT No. Fits Belt Front Rear
Clutch. All 2” and 3” Belt Pulley Pulley
20-0612 Drives include Big Fix Bearing 20-0622 1936-54 20-0117 20-0908 20-0921
Kit. 20-0623 1955-64 20-0117 20-0909 20-0921
1¹⁄₂” Kick Starter only (Open or Closed Primary) 20-0624 1965-84 20-0117 20-0909 20-0921
VT No. Fits Belt Front Pulley Rear Pulley Kick and Electric Starter
20-0611 1936-54 20-0102 20-0905 20-0919 20-0625 1965-84 20-0117 20-0909 20-0922
20-0612 1955-64 20-0102 20-0906 20-0919 20-0626 1979-84 20-0117 20-0909 20-0922
20-0613 1965-78 20-0102 20-0907 20-0919 with Rear Belt Drive
20-0614 1979-84 20-0102 20-0904 Electric Start 5-Speed FLT-FXR
1¹⁄₂” Kick and Electric Starter (Open or Closed Primary) 20-0633 1979-84 — — —
20-0615 1965-78 20-0100 20-0904 20-0918 BDL Replacement Starter Ring Gear for
20-0616 1979-84 20-0102 20-0904 20-0918 8mm and 11mm 4-Speed belt drives.
20-0617 1979-84 20-0100 20-0904 20-0918 VT No.
2” Kick Starter Only (Open Primary) 20-0933 1¹⁄₂” x 8 mm or 11 mm Belt Drives
1936-54 20-0104 20-0965 3” Belt Drives
20-0619 1955-84 20-0104 20-0911
3” Kick Starter Only (Open Primary)
1936-54 20-0105 20-0912
20-0621 1955-84 20-0105
A B
22-0227
1980-83 FXB Belt and Pulley Replacements.
VT No. OEM # Item
C 20-0228 20-0309 24051-80 B Spacer .012
20-0310 24052-80 B Spacer .023
A-Clutch Dome For Big Twins is a highly polished clutch
20-0311 24053-80 B Spacer .035
dome which gives that finished custom look to our open belt
20-0312 24054-80 B Spacer .055
drive units.
18-1135 33163-65B C Ring Gear
VT No. Type
20-0334 3 Hole, Polished
20-0335 3 Hole, Chrome Note: There is no warranty on belts when sold as part of kit or
B-Clutch Releasing Disc. Precision machined aluminum individual replacements.
pressure plate for all 1941-84 Big Twin.
20-0332 Polished
C-Bearing Support is used when cast aluminum inner pri-
mary cover is removed for installation of open belt drive on
1965-84 Big Twin 4 speed, the main shaft requires additional
support.
20-0228 Chain type fits with belt front and rear chain drive
20-0227 Belt type, with front and rear belt
12-0313 Bearing for VT No. 20-0228
12-0379 Bearing for VT No. 20-0227
558
20-0609
3” BDL Belt Drive
BDL 8mm x 42mm Electric Start Belt Drives for 4 Speeds.

Includes a polished pressure plate, Kevlar clutch and fea-
tures a shorter length clutch hub that eliminates unnecessary
weight past the end of the mainshaft and can be installed
without any modifications to inner primary. Sealed inner pri-
mary bearing not included.
VT No. Fits Belt F. Pulley R. Pulley
20-0609 1970-83 Big Twin 20-0903 20-0917 BDL 3” Electric Start Belt Drives with billet motor plate.
with Rear Chain Drive Includes 8mm belt, polished motor plate, double row sealed
20-0610 1979-84 Big Twin 20-0630 20-0902 mainshaft support bearing, polished side guard, polished
CLASSIC
with Rear Belt Drive dome pulley covers and Kevlar clutch. *Note: Can only be
18-0554 Replacement Clutch Pack for Above Units used with 1991-up starter motor and some modifications will
be necessary to install these kits. Fits 1970-78 FX with ratch-
et top transmission.
individual replacements.
VT No. Belt Rear Pulley
20-0602* 20-0105 20-0915
individual replacements.
20-0100 Primary Belt
Replacement Belt for Primary NUMBER OF TEETH

STD Kevlar Application GATES P/N Belt F. PULLEY R. PULLEY Length
20-0100 20-0200 8mm 1965-78 FL-FX Closed Primary Electric Start 30853-1-ST 132 41 61 42½”
1½”
20-0102 20-0201 8mm 1937-84 FL-FX Closed Primary Kick 30853-2-BE 132 39, 40, 41 61 or 62 42½” plus
Electric Start Bulls Eye Belt 1½”
20-0103 20-0202 8mm FL-FX Open 1½” 1937-84 FL-FX 37144 x 1½” 144 47 76 46½”
20-0104 — 8mm FL-FX Open 2” 1937-84 FL-FX 37144 x 2” 144 47 76 46½”
20-0105 — 8mm FL-FX Open 3” 1937-84 FL-FX 37144 x 3” 144 47 76 46½”
20-0115 20-0205 11mm 1937-84 FL-FX Open or Closed Primary 30884 x 1½” 96 29 44 42½”
Kick or Electric Start
20-0117 20-0206 11mm 1937-84 FL-FX Open or Closed Primary 1185 x 1½” 99 31 47 437/8”
Kick or Electric Start
20-0116 20-0207 11mm 1979-84 FLT-FXR Closed Primary Electric 30991 x 1½” 92 31 47 40½”
Start with 5-Speed Transmission
20-0106 20-0208 14mm with or w/o Idler Closed 1½” 37-E84 FL-FX 38078D x 1½” 78 24 37 43½” + .035
20-0110 — 14mm Idler Closed 1½” 1979-84 FLT-FXR 5-Speed 30931 x 1½” 72 24 37 40½”
Note: All belts by Primo, BDL or Karata for drives carry no warranty of any kind, as sold either as individual replacements or complete drive kits.
559
Front Pulley 20-0449 Final Drive Front Pulleys avail-
able for Big Twin models as sup-
plied by V-Twin or BDL. All BDL
20-0720 pulleys are ¹⁄₃ lighter than stock
and include nut, lock plate and
screws. Stock size pulley noted
by * utilizes 10-24 allen bolt to
lock nut.
20-0498 V-Twin BDL

Big Twin Drive Pulley accepts 1.125 or 1.5 wide belts. Front # of 79-84 BT 79-84 BT
Pulley includes pulley indexing nut seal and seal spacer as Teeth 4-speed 4-speed
required. Fits 1979-84 4-Speed. 29 20-0653
Front 30 20-0654
VT No. Finish Tooth 32 20-0656
20-0720 Raw 33 33 20-0449* 20-0657*
Rear
20-0452 Silver 70
20-0498 Chrome 70
Primo Belt Drive

20-0047 8MM Closed
Closed Primary for 74” and 80” is designed to fit inside pri-
mary cover. Increases horsepower, mileage and quiets engine
while retaining stock appearance. Closed Primary. Kick start
only 8mm. 1½” belt type.
VT No. Years Replacement Belt
20-0047 1978-84 20-0102
Electric Start Models (8mm). 1½” Belt type.
20-0010 1965-84 20-0100
20-0507 Starter Ring Gear
*Note: For models with belt drive.
Note: All belts by Primo, Karata and BDL are manufactured by Gates Rubber. Belts for drives
carry no warranty of any kind, as sold either as individual replacements or complete drive kits. 8MM Open
Open primary belt drive for 74” and 80” 8mm. These units
8MM Open or Closed were designed for competitive use or big inch street engines.
Open Or Closed Primary Belt Drive. Kick starter models Note: All 2” and 3” belt drive units fit adjustable
only (8mm) 1½” belt type. transmission bikes only.
VT No. Fits Replacement Belt VT No. Fits Width Replacement Belt
20-0044 1937-54 20-0102 20-0041 1955-84 2” 20-0104
20-0039 1955-64 20-0102 20-0042 1937-54 3” 20-0105
48-0498 48-0470 48-0030 48-0033 48-0025 48-0044 48-0048 48-0372 48-1824

560
Alternator Cover Set includes pol-
ished outer housing and chrome
rotor cover.
Belt Drive
VT No. 20-0337 20-0331
Installed
20-0220 20-0330
Polished Alternator Cover for Big Twins is for use on all Cone
Belt Shroud and Side Guard Kit is for alternator Big Twins
motors. Designed to protect your alternator, also helps cooling
with 1¹⁄₂”, 2” or 3” open belt drives. The kit includes chrome belt
by acting as a heat sink. It has a mounting lug for belt shroud
shroud.
built in. VT No. 20-0330
VT No. Item Fits
20-0222 Belt Shroud Generator Big Twin with 3” Drive Chrome Big Twin
20-0220 Belt Shroud Generator Big Twin with 1¹⁄₂” or 2” Drive Alternator Rotor
27-1729 Cover presses
over 1981-up
rotors for tight fit.
VT No. 20-0216
CLASSIC
Frame Mount Kickstand Stop for use on all open belt drive
Big Twin by clamping to frame tube. Fits 1³⁄₈” and must be cut Outside Belt Chrome Alternator
to desired length. VT No. 27-1729 Guide Plate is Rotor Cover fits major
Chrome Pike Motor Nut fits 1955-up for all Primo 8, 11 brand belt drive and open
Big Twin sprocket shaft. and 14 mm front primary set ups. Installs to
VT No. 37-0890 pulleys except completely cover the steel
taper shaft. alternator rotor.
Acorn Engine Nuts for all Big Twins. VT No. 20-0230 VT No. 20-0238
VT No. Year
7107-1 1936-54 17-0945 Sprocket Nut and Lock Tab Set for 1955-
7816-1 1955-76 up Big Twin allows locking of nut by utiliz-
ing two tabs which fit into sprocket holes
20-0307 when non-compensator sprocket is used.
VT No. Item
17-0945 Kit
12-0504 Nut Only
Nerf Bar is constructed of 1” chrome
bar, bolts to left side for primary protec-
Equalizer Engine Plate designed for open primary on all tion. Fits 1958-84 FL.
1970-up cone motors, connects engine and transmission for a VT No. 20-0305
rigid unit, when eliminating the inner primary. Alternator cover,
engine plate, idler assembly and bearing support sold sepa- 20-0556
rately. This plate is without the idler slot. Front
VT No. 20-0307
Primo Replacement Pulley

VT No. Primo# Year Type Belt
Primo 8mm Front Pulleys 74 and 80 HD
20-0555 P-39-T 1937-54 Tapered Shaft 1¹⁄₂” Belt (Use with Adjustable Transmissions)
20-0556 P-39-S 1955-64 Splined Shaft 1¹⁄₂” Belt (Use with Adjustable Transmissions)
20-0558 P-41-S 1965-84 Splined Shaft 1¹⁄₂” Belt
20-0561 P-47-T-3 1937-54 Tapered Shaft 3” Belt (Open Installation)
Primo 8mm Rear Pulleys 74 and 80 HD
20-0567 P-61-E 1965-84 Rear Pulley 1¹⁄₂” Belt (Electric Starter, Closed Primary, 4-Speed)
561
Knob
21-1936
21-2011 21-0937 Installed
21-1945 21-1946 21-1947
21-0762
21-1948 Hand Shifter Knobs with ³/₈ x 24 thread unless noted.
21-0700 21-0769 VT No. Style
21-2121 21-0829 21-1936 Small, Plain, Black
21-2015 21-2011 Large, Plain, Black
21-0650 21-0694 Large, World’s Fair
21-0651
21-1945 Small, World’s Fair Insert
21-0763 21-1946 Army Style
21-0780 21-1947 Masonic Style
21-1948 Purple Heart Style
21-0780 Universal Shifter, brass finish, skull
21-0762 Panhead Motor
21-0700 Flathead Motor
21-0769 Knucklehead Motor
21-2121 Brass Skull
21-0986 21-0966 21-2015 Brass Skull (none)
21-0650 Brass Skull, ⁷/₁₆ — 20
21-0588 ¹⁄₄ — 20 and ³/₈ — 24 Adapter
21-0829 Black Knob with photo insert
21-0986 Police Emblem
21-0763 Purple Heart Friend
21-0965 21-0953 21-0966 Metro Police, Washington, D.C.
21-0937 21-0938 21-0953 Shovelhead Motor
21-0939
21-0965 Evo Motor
21-0937 Dice, Red
21-0588 21-0938 Dice, White
21-0939 Dice, Black
21-0832 Large Temperature Gauge
21-0924 Small Temperature Gauge
21-0924
21-0832
Billet Shifter
Assembly fits
1948-85 FL.
VT No. 22-0738
21-0259
Watch Our Video! 21-0963

user/TeddCycle Tank Shift Lever
Patches for Knucklehead. 1936 Style Knucklehead Shifter Parts.

VT No. Style VT No. Item 49-0364
48-1064 Knucklehead Wings
49-0364 Gate
48-1163 Knucklehead
48-1163
48-1187 Knucklehead
21-0963 Lever
22-0738 Kit
21-0981 Gate
562
28-0301 28-0302 28-0312
Jockey
21-0932
Clutch and Brake Pad Set. 28-0551 21-0934

VT No. Color Item
28-0301 Black 3 Piece
28-0302 White 3 Piece
28-0551* Black 1 Piece *Note: Oval Pad only 22-0654 Installed
28-0312 Black 3 Piece, Replica
49-1921
49-1923
CLASSIC
Jockey Pedal Assembly. Original “LEE” styling. Chrome jock-
ey pedal mounts to OE style rocker clutch bracket. Available
Rocker Clutch Pedal Pads. Cast original style with nickel plat- separately.
ing. VT No. Brand
VT No. Type 21-0934 Paughco
49-1921 Toe 21-0932 Lee Style
49-1923 Three Piece Set 22-0654 Lee Kit
Red Baron Cross Shifter
21-0697 Knob is machined of billet with
natural finish.
VT No. Thread
21-0697 ³⁄₈ — 24
21-0703 ⁷⁄₁₆ — 20
Slap SticksTM
21-0306
21-0125 21-0305
Replica Rubber Pedal Set. Original “Beck” design from the

1940’s three piece set fits brake pedal and rocker clutch.
VT No. 28-0986
Slap Stik Ratchet
17-0884 17-0880 Top Kit.
VT No. Finish
17-0884 Chrome
17-0880 Natural Jockey Handle Only. Order knob separately.
VT No. Year Type Speed
21-0306 1952-78 Ratchet 4
21-1987 Stainless screws for VT No. 21-0306
21-1997 Chrome screws for VT No. 21-0306
21-0125 1979-84 Rotary 4
21-0305 1936-51 Jockey 3-4
563
Foot Clutch Kit 18-8302
18-3614
22-0720
Installed
18-3616
22-0720
21-0205 18-8304
22-1016
18-3617
Rocker Clutch Lever Rod and End.

Cadmium Chrome OEM Years Item
22-0565 18-8302 18-3614 36918-36 1936-64 Rod
Installed 18-1223 18-3616 36917-65 1965-84 Rod
18-8304 18-3617 36916-36 1936-up End
22-1676 22-0997
49-0046 — 36916-36 1936-73 End, Parkerized
7819-4 21-0205 33879-36 1936-84 Bolt
Clutch Lever Rods And Hardware.
Cad Chrome # OEM Years Item
Foot Clutch
18-0575 Cadmium 3671-36 1936-51 Rod
18-8302 18-3614 A 36918-36 1936-64 Rod
18-1223 18-3616 A 36917-65 1965-84 Rod
18-8304 18-3617 B 36916-36 1936-up Rod End
7819-4 21-0205 C 33879-36 All Rod End Bolt
22-0565 22-1678 18-8329 — Rod End
18-0432 — Rod End
22-1675 Jiffy Stand or Shifter Mount Plate Bolt Kit to attach assem-
bly to left side of frame. Fits 1936-99.
VT No. Finish Type
9617-18 Chrome Hex for Mount Plate
9617-18T Chrome Hex
9618-18 Cadmium Hex for Mount Plate
Rocker Clutch Kit does not include clutch rod. 9619-18 Parkerized Hex for Mount Plate
Chrome Black Year 9619-18T Parkerized Hex for Mount Plate
22-0720 22-1016 1936-84 22-0874
Chrome Parkerized Year
21-0102
22-0565 1936
22-1676 22-0997 1939-40
22-0565 1936 Type 21-2023 21-0987
22-1678 22-1675 1936-38 Jockey Parts for all Big Twins with ratchet or jockey top.
22-0874 1940-84 VT No. Item
Note: Clutch is released with pedal in forward position. 21-0102 Pedal and plate
21-0103 Pedal only
21-0987 Pedal only
21-0104 Plate only
21-2023 Rod End
21-0934 Pedal and Plate
Rocker Clutch Cable Adapter
fits all rocker clutch assemblies
when fitted with a clutch cable.
49-0471
Fits 1941-85.
49-0472 49-0476 VT No. 22-0341
Components.
VT No. Item
49-0471 Pedal, 1936-38
49-0472 Bracket, 1938-40
49-0476 Bracket, 1936-37
Note: Clutch is released with pedal in forward position.
564
Jockey Clutch
Assembly
49-1252 2550-2 VT No. 22-0703 Installed VT No. 22-0705 Installed

21-0313 49-1520
49-0146 21-0316 49-0664 Bushing
Installation
Tool
VT No. 2550-2 22-0590
CLASSIC
Components.
VT No. # OEM Item
9617-18 — Bolt Mt Kit, Chrome
9618-18 — Bolt Mt Kit, Cadmium
9619-18 — Bolt Mt Kit, Parkerized
37-8959 A — Nut, Zinc
49-0664 — Cover, 1936-38
21-0316 B 36830-36 Cover, Chrome
49-2597 B 36830-36 Cover, Black
49-1506 — Cover, Stainless Steel
49-0664 Cover, Black 22-0705
13-0946 2412-36 Spring, Parkerized
13-0962 C 36880-36 Spring, Parkerized
13-0135 C 36880-36 Spring, Parkerized 21-0163
13-0170 C 36880-36 Spring, Chrome 21-0163
2350-2 1942-64 Pedal, Stud 49-1506 Installed
2351-2 1936-39 Pedal, Stud
49-0146 D 36811-65 Pedal, Black
49-2528 D — Pedal, Chrome
49-0125 E 36842-41 Bracket, Black
49-2529 Bracket, Chrome 49-2528
49-1520 F, G, H, O Friction Parts Kit
49-1252 Parkerized Friction Kit, Eight Piece Slap Stick Jockey Kit includes assembly with jockey handle
49-0935 — Friction Kit for 4 Speed 1952-78 ratchet top Big Twin models. VT No.
49-0145 I 36816-65A Rod Lever, Chrome 22-0705 and 22-0735; 1979-84 is for rotary tops and include
2482-3 J 36866-41 Foot Lever Pin handle, cable and rocker clutch, spacer, and front and rear
2544-1 — Spacer Stud, 1936-39 Big Twin brackets to attach the jockey cable. VT No. 21-0163 includes
21-0313 K 36869-70 Spacer Block cable and two brackets for use with a billet shifter assembly
37-8937 G 36906-36 Spring Washer, 5 pack such as 22-0755.
37-8938 H 36913-41 Shaft Washer, 5 pack VT No. Item Year Type Style Type
37-8939 F 36899-41 Friction Disc, 5 pack 49-0935 22-0703* Kit 1952-78 Ratchet Slap Pedal
10-2508 L 36857-36 Bushing 22-0590 Kit 1952-78 Ratchet Slap Rocker
2353-2 M 30871-40 Spring Stud 22-0705 Kit 1979-84 Rotary Slap Rocker
12-0907 N 11037 Snap Ring 22-0833 Assembly 1952-78 Ratchet Rocker
37-8954 O 36909-36 Washer
21-0163 Kit 1979-84 Rotary —
49-0031 D 36811-65 Clutch Pedal, Parkerized 49-0031
21-0125 Handle 1979-84 Rotary —
21-0313 Spacer Block 1965-84 — —
*Note: 1965-78 requires spacer block 21-0165.
Chrome Rocker Foot Clutch
22-0833
Assembly is for models with
a ratchet top. Includes rocker
pedal assembly, pull rod and
49-1519 49-0831 clutch arm. Fits 1952-1978.
Friction Kit fits 1936-38 EL and 1936-40 W. Kit includes spring. VT No. 22-0833
VT No. Fits
49-1519 1936-38 EL
49-0831 1941-52 WL
49-0671 1941-78 FL
565
Police Jockey Shifter
43-0124 21-1988
22-0712 Installed
21-0204
22-0712 22-0711
Installed 21-1936
21-0231
Police Jockey Shifter Hardware List

VT No. # OEM Item
43-0124 A 33631-66 Support Bracket, Alloy
21-1988 B 33676-66 Shifter Lever, 3 and 5 Gallon
21-1936 C 33745-31 Shifter Ball, Small
21-2011 C Shifter Ball, Large
21-1992 D 33776-66 Pivot Shaft
21-1990 E 33789-66 Guide 4 Speed
22-0710 22-0737 21-1991 E Guide 4 and 5 Speed
21-1935 F 33857-52 3 and 4 Speed Reverse Rod
Police Jockey Shifter Kit clamps to all Big Twin front frame 21-1994 F Shifter Rod, Ratchet Top
tubes. VT No. 22-0711 features a smooth gate for shifting. Use 21-2044 F 33857-66 Shifter Rod, 3 Speed and Reverse
either rocker clutch pedal or jockey pedal for operating clutch. G 33865-66A Spring, Shifter Lever
VT No. Year Fits Model 21-0204 H 33870-51 Shifter Rod, End
22-0710 1936-79 only Handshifter All 21-1995 I 33875-66 Shoulder Bolt, Lever
22-0711 1952-79 Big Twin Ratchet Top FX-FLH 21-0205 J 33879-36 Shoulder Bolt, Rod End
1979-84 Rotary Top FLH 21-0315 K 38460-52 U Bolt, Bracket
22-0712 1979-84 Rotary Top FL-FXE 23-0421 42269-30 Clevis Pins, 10 pack
22-0737 1979-84 Rotary Top 3.5 21-0962 Shifter Mount Bracket
21-0231 1941-64 Rod End, Zinc
50-1541 49-0391
50-1530
Police Fender Marker Plate fits 1936-84 45” and Big Twins. 49-0390
Order decal set separately.
VT No. Item 49-0406
50-1530 Marker Plate
48-1981 Decal Set 48-1981
50-1541 Set
Billet Jockey Shifter Kit includes 49-0400
top motor mount to fit 1986-99 Big
Twins. Police Siren Complete Units include brackets for units.
VT No. Fits Cover Wheel
VT No. Item
49-0390 1973-84 FL Rear
21-0180 Kit
49-0391 1949-52 W Rear
21-0129 Handle 49-0400 1941-57 FL Rear
49-0406 1936-84 All Front
566
Big Twin Handshift
C
A
B
Smooth D
Gate! Hand Shifter Rods for stock style. Order end separately.
VT No. # OEM Years Type
21-0205 A 33879-36 1936-79 Shoulder Bolt
22-0725 7819-4 A 33879-36 1936-79 As Above, Cadmium
9706-4 A 33879-36 1936-79 As Above, Parkerized
Installed 21-0204 B 33871-67 All Rod End, Chrome
21-0231 1941-64 Rod End, Zinc
21-2070 As Above All Parkerized
21-2075 As Above All Cadmium
21-1940 C 33857-36 1936-50 Big Twin with hook end,
Cadmium
CLASSIC
21-1341 As Above Parkerized
21-0985 Kit 1936-50 Parkerized
21-1935 D 33857-51 1951-79 Big Twin, Cadmium
21-1951 33857-51 1951-79 Big Twin, Chrome
21-2044 33857-66 1951-79 Chrome
22-0722
Installed
Chrome 4 Speed Ratchet Top Tank Shifter Kit features 49-0364 49-0107 49-0073 21-0881
smooth gate, handle and rod and pivot bolt for 3.5 gallon tanks 49-0076
49-0147
for years listed.
VT No. Years
22-0725 1947-64 8212-3
22-0722 1936-46 Shifter Gates for 61, 74” and 80” models. Pattern is noted from
top to bottom.
21-0905 22-1077 VT No. OEM Speed Type Top to
Bottom
49-0364 2209-36 4 Speed 1936 Chrome 1N234
49-0001 4 Speed 1936 432N1
49-0107 33785-40 3 Speed Black 1N23
49-0073 33790-39 3 Speed Chrome 1N23
49-0147 33791-39 3 & R Chrome R1N23
21-0655 1939 Chrome 12N34
Shifter Lever Kit includes correct gate, rod, end, pivot bolt and shifter 21-0892 4 Speed Chrome N1234
lever. Chrome shifter lever fits Big Twin for left side mounting. Note: 49-0076 33789-37 4 Speed Chrome 1N234
Pattern from front to rear. 21-0881 33789-37 Parkerized 1N234
VT No. Year Item Pattern 21-0659 1939 Parkerized 12N34
21-0995 4-speed gate 1N23 8212-3 33822-36 3 & 4 Gate screws (3) Chrome
22-1077 1937-46 4 Speed 1N234 37-9026 Screw Set
21-0907 1947-50 4 Speed with hook 432N1 49-0111 49-0075
21-0905 1951-65 4 Speed 432N1
49-0074
22-1078 1947-65 3 Speed and Reverse 32N1R
49-0101 — Smooth Gate
Parts Available Separately Shifter Gates for Big Twin.
VT No. OEM Year Item VT No. OEM Fits Speed Pattern
21-0963 — 1936 Chrome 49-0111 33791-47 1947-65 FL & 1947-48 EL 3 32NIR
21-0187 33675-37 1936-46 Chrome Lever 49-0075 33789-47 1947-66 FL, 1937-41 UL 4 432N1
21-0188 — 1937-45 Chrome Lever 1936-52 EL
21-0198 — 1937-46 Parkerized Lever 49-0074 33785-47 1947-51 FL 32N1
21-1938 33675-37A 1938-73 Chrome Lever Slotted Oval Head Screws are 5/16–24 x 23/32 long
21-1937 33675-37A 1938-73 Painted Lever to fit various applications such as stock air cleaner and
21-0157 33675-37C 1965-73 Chrome Lever tank shifter guide and replaces 33822-36.
21-1944 — 1947-64 Chrome Lever
7818-5 33775-37 1938-73 Pivot Bolt Kit
VT No. Type
7818-5T 33775-37 1938-73 Pivot Bolt Kit 8212-3 Chrome
9710-3 Parkerized
Shifter Lever Stud And Bushing Kit contains 37-9026 Chrome (2)
necessary hardware required to mount shifter 37-0065 Shifter Insert Weld-In
lever on Twins with handshift. Spring steel wave Forward Shifter Tank Kit includes chrome
7818-5 washer is furnished to help prevent rattles. 21-0925
VT No. Year Finish gate, lever and arm for 1936-46, 4 Speed
7818-5 1947-65 Cadmium model EL and FL.
7818-5T 1947-65 Zinc VT No. Item VT No. Item
9711-5 1947-65 Parkerized 21-0925 Kit 21-0216 Arm
9711-5T 1947-65 Parkerized 21-0945 Gate, chrome 17-0504 Inner Arm
9018-5 1947-65 Chrome 21-0978 Gate, brass
2582-3 1938-46 Parkerized
2581-6 1937-38 Cadmium 567
Forward Shifter Kit 22-0802
22-0801 FLH-FXWG-FXST Forward Shifter Control is for 1979-84

FLH-FXWG with down turn shifter arm. It does not include the
ratchet arm and dust cover. Also, it can be used on ratchet top
4-speed 1952-79 models, when it is not desired to remove the
22-0801 Installed
arm and dust cover.
VT No. 22-0802
1952-78 FLH Type No Mix-Ups No Searching One Kit Does It All For Less!
Shifter kit on this page is compatible with VT No. 22-0500, 22-0501,
22-0505, 22-0506, 22-0510 and 22-0512. Note: FLH models 1979-83
rotary trans tops have the down turned shifter top arm. Check motorcy-
22-0802
cle or your factory parts book for correct application.
22-1015
Original Forward Shifter Control Kit. FLH type allows the use
of foot pegs or footboards. Order complimenting forward brake
22-1055 control on opposite page. Units allow 1 down and 3 up shifting
pattern. The 22-0801 and 22-1055 kits include proper ratchet
arm and dust cover. All other kits attach to existing components
on shifter mechanism. Instructions and diagram are included
with each kit. Kit is display packaged!
VT No. Fits Speed
22-0801 1952-79 FL-FLH 4
1971-76 FX-FXE 4
22-0802 1979-up FLH 4
1980-85 FXWG 4
1985-FXST 4
22-1055 1974-78 FXE 4
22-1015 1979-99 FX-FXE 4
1981-99 FXR 5
Replica Foot Shifter

Replica Foot Shifter
22-0805 Kit for 1952-69 Big
Twin includes black
bracket, cadmium rod
assembly, zinc inner
arm, chrome cover, and
shifter lever.
22-0809 21-0208
VT No. 22-0805
22-0805 Replica Foot Shifter Kit for 1970-84 Big Twin includes chrome
bracket and cover and chrome rod assembly. Order chrome
ratchet drum cover kit for 1970-Early 79 models only.
VT No. Fits
22-0809 1970-84
21-0208 Drum Cover Kit
568
Forward Shifter Kit
Softail Style Replica Forward Shifter Kit is complete with all
hardware necessary for installation on 1952-84 4-speed. Use in
conjunction with our FXST replica controls listed, as all kits place
pegs in a forward position. Foot rests on peg while shifting for
added comfort. This is an exact stock replacement in chrome for
1980-85 FXWG. Kit includes chrome heavy duty shifter bracket,
inner lever, shifter lever, rod, rubber shift peg and foot peg, all
which is display packaged and labeled with detailed instructions
and assembly diagram for each model listed below.
22-1002 Installed VT No. Fits
22-1002 1952-78 FLH Ratchet Top 4-Speed
1971-73 FX-FXE
22-1003 1979-84 FLH-FXWG-FXST Rotary Top 4-Speed
22-1004 1979-84 FXE Rotary Top 4-Speed
1981-99 5-Speed FXR-FXS-FXRS
CLASSIC
22-1002 22-1002
Installed
Mousetrap Kit
18-3603 18-3626
18-3606
22-0702
Mousetrap Installed Mousetrap Clutch Release Levers for 1936-78 Big Twin with
Mousetrap Booster Assembly includes all parts as shown,
ratchet top.
chrome cover, chrome spring, zinc plated arm, natural finished
VT No. OEM Year
aluminum bracket, cable and handle assembly, for use on foot
18-3603 37051-36 1936-64 with tin primary
shifter models 1952-67.
18-3626 37051-36 As Above Parkerized
VT No. 22-0702
18-3606 37052-65 1965-78 with aluminum covers
A
B 42-0302
C
13-0142
Component List for VT No. 22-0702 Mousetrap Clutch Booster Assembly.
VT No. OEM Finish Item Clutch Lever Rods and Hardware for mousetrap.
18-3633 36916-52 Chrome Rod End
18-3615 36918-52 Chrome Pull Rod Cadmium Chrome # OEM Years Item
18-0832 36918-52 Zinc Pull Rod 18-8303 18-3615 A 36918-52 1952-65 Rod
18-0839 36918-52 Zinc Kit
21-2026 36921-52 Zinc Rod End Bolt — 18-3629 A 36918-65 1965-67 Rod
21-2076
9203-3
36921-52
36921-52
Chrome
Chrome
Rod End Bolt
Rod End Bolt
18-8305 18-3633 C 36916-52 1952-67 Rod End
9204-3 36921-52 Cadmium Rod End Bolt — 42-0302 B 38495-52 1952-67 Cover
43-0122 38456-52 Aluminum Booster Bracket
21-0315 38460-52 Zinc U Clamp, each
2706-5 Chrome U Clamp Kit
Mousetrap Cables are stock length
2705-5 Cadmium U Clamp Kit 36-0688 and fit 1952-65.
43-0123 38472-52 Zinc Bell Crank
42-0302 38495-52 Chrome Spring Cover VT No. Type
13-0143 38498-52 Chrome Booster Spring 36-0400 VT
13-0142 38498-52 Black Booster Spring
21-0312 38502-52 Zinc Eye Bolt 36-0688 Replica
12-0330 38505-52 Each Needle Bearing
36-0400 38618-52 Complete Cable
36-0688 36668-92 Replica Cable
26-0526
12-0907
45002-65
11037
Polish Handle Assembly, 1965-68
Snap Ring, 10 pack 569
Shifter Lever
21-0455
21-2013 21-0311 Shift Lever for Big Twin models.

21-2068 21-0308 Chrome Zinc Fits Type
21-2013 21-0359 1954-73 FLH, not threaded Stock
21-0311 21-0458 As Above, Spline Stock
21-2068 As Above, Stainless Steel Stock
21-0308 21-0455 1965-84 FL 9³⁄₄” Heel Toe
21-0309 21-0309 21-0454 1965-84 FL Splined Heel Toe
21-0302 21-0302 21-0457 1974-85 FXE Spline Stock
Shifter Linkage
B A 21-0231
A
21-0207 C B
21-0204 C 21-0205 23-0421

Chrome Replica Foot Shifter Lever Cover for Big Twin.
VT No. # Fits Shifter Rod Linkage is available as a complete rod, end and
42-0320 A 1952-64 FL shoulder bolt, or separately, chrome.
42-0319 B 1965-84 FLH VT No. # Item Finish
21-0207 A Rod Kit complete Chrome
21-0226 A 2” Rod Kit complete Chrome
FX-FXE Shifter Linkage replaces 34614-
21-0212 A As Above Cadmium
74 on 1974-84 4 Speed models. Features
21-0230 Shifter Rod Extended 4” fits 1958-78 Big Twin
adjustment at both ends. Cadmium finish. 21-0205 B Shoulder Bolt and Nut Chrome
VT No. Type 9103-4 B Shoulder Bolt and Nut Chrome
21-2021 Assembly 9706-4 B As Above Parkerized
17-9781 Right Thread end only 7819-4 B As Above Cadmium
21-0204 C Rod End Lolly-Pop Chrome
Chrome Cover Shifter Lever replaces 60400-74. 21-0231 Rod End Kit Zinc
Use on all 1974-up FX models except FXWG and 21-2070 C As above Parkerized
FXR. VT No. 42-0324 21-2075 C As above Cadmium
Shifter Bracket Bushing 23-0421 Clevis Pin Zinc
VT No. Fits
10-2502 1952-69 Big Twin
10-2511 1970-84 Big Twin
Chrome Forked Rod End Clevis is threaded 21-0903
⁵⁄₁₆ — 24 for use on shifter or brake rods.
VT No. Pin Size 21-0901 21-0904
21-2033 ¹⁄₄
Clevis Pins, zinc plated includes cotter pins Stock Rubber Shifter Pegs are long or short stud. The
and washers, sold in 10 pack. ⁷⁄₈” long stud is used when the lever is unthreaded and stud
VT No. Use accepts a nut. Short ⁵⁄₈” threaded screws into lever. Includes a
10 pack of 5 long and 5 short.
23-0421 1930-69 Brake, 1982-up Brake VT No. Color Type
1952-84 Shifter 21-0901 Black Short
21-1986 1970-81 Brake 21-0908
21-0317 Black 10 pack
Chrome Shift Shaft Cover has ½” 21-0902 White Short
inner diameter to fit over unused shift- 21-0903 Black Long
er shaft in primary cover when install- 21-0904 White Long 21-0902
21-0908 Black X-Long
37-8872 44-0047 ing forward controls, sold each.
VT No. Type 17-9757 17-9756
37-8872 Acorn
44-0047 Dome
Billet Jockey Shifter Kit includes 10-0743

top motor mount to fit 1986-99 Big Inner Shifter Arms are splined and fit through primary cover on
Twins. 1974-84 FX 4-Speed, have linkage through front primary cover.
VT No. Item VT No. Year Model Item
21-0180 Kit 17-9756 1974-Early79 FX-FXE Lever
21-0129 Handle 17-9757 1979-84 FX-FXE Lever
10-0743 1974-84 FX Bushing
12-0905 1974-84 FX Snap Ring
21-2045 1982-84 FXR Shifter Linkage
570
A B C
Shifter Bracket
21-2071
21-2013
21-1996
21-2080
Frame Mount Shifter Brackets as stock replacements or when
21-2073
installing forward controls. VT No. 21-2030 and 21-2029 include
bushing and zerk grease fitting in stock configuration. VT No. 21-2013
21-0100 is our original heavy duty bracket constructed of 7mm
21-2072
steel. Order inner shift arm separately.
VT No. # Finish Style Fits 21-2064
21-2029 A Chrome Stock 1970-84 FLH 21-0568
21-2030 A Zinc Stock 1970-84 FLH
21-0100 B Chrome Heavy 1952-84 FLH
21-0120 C Chrome Smooth Inner Arm
21-1996 C Chrome Splined Inner Arm
CLASSIC
1952-69 Shifter Bracket. Stock type, accepts 42-0320 cover,
Jiffy Stand or Shifter Mount Plate Bolt Kit to attach assem- replaces 33630-52. Arm and inner levers are non-splined.
bly to left side of frame. Fits 1936-99. VT No. Item Finish
VT No. Finish Type 21-0732 Bracket Black 21-0732
9617-18 Chrome Hex for Mount Plate 21-2071 Inner Arm Chrome
9618-18 Cadmium Hex for Mount Plate 21-2073 Inner Arm Zinc
9619-18 Parkerized Hex for Mount Plate 21-2072 Heel Toe Arm Chrome
9619-18T Parkerized Hex for Mount Plate 21-2080 Heel Toe Arm Zinc
21-2013 Shifter Arm Chrome
V-Twin Shifter Washer Set includes 5 large and 21-0568 Heel-Toe Set Chrome
5 small nylon washers to reduce vibration at inner 12-0905 Snap Ring
shifter arm and pedal. Sold as a 10 pack.
Ratchet Shifter Levers

VT No. 37-9104
A B 21-0199
21-0208 Chrome Shifter Drum Covers for ratchet tops on 1952-79,

21-0210
4-Speed.
VT No. # Year Item
21-0214 21-0200 A 1952-73 FL Dust Cover
Chrome Dust Shield and Shifter Arm Set include mounting 1971-73 FX with indent
hardware. 21-0206 A As Above Zinc
VT No. Fits Type 21-0199 1952-73 FL Smooth
21-0210 1952-Early 78 FL, Covers Ratchet Drum Full 21-0201 B 1974-79 FX Dust Cover
21-0208 1952-Early 79 FL Stock 21-1987 Stainless Allen Screws, 12 pack
21-0214 1974-Early 79 FX Stock 22-0704 22-0340
B 21-0195
A
Competition Foot Shifter
Chrome Shifter Arms for Big Twin models. Kit allows one up and all
VT No. # Model/Type down shifting pattern for pos-
21-0202 A 1952-78 FL itive shifts.
21-0215 A 1952-78 FL, Zinc 22-0704 VT No. Year/Top
10-2484 Bushing For Above Installed 22-0704 1952-78 Ratchet
21-0195 B 1974-Early 79 FXE 22-0340 1979-84 Rotary
21-0421 1952-78 Arm
571
Billet Forward Control
Chrome Shifter Rod, Stock
22-0755
21-0207 1958-85 FL
21-0224 1979-84 FX
Chrome Shifter Rods fit 2 and 3” extended controls
21-0219 1958-78 Big Twin
4 Speed Ratchet
21-0226 1958-78 Rod Only +2”
21-0218 1979-84 FXE 4 Speed
22-0760 Right
22-0713
Left
22-0760
Left
22-0713 Right
22-0758 Right 22-0758 Left
Chrome Billet Forward Control Set fits 1986-99 Softail, 1958-

84 FX-FL includes rubber belted pegs as shown. Includes shifter
and brake side with master cylinder. Order shifter rod and stain-
less steel brake lines separately.
VT No. Position Complete Right and Left Side Brake and Shifter Set for 4-
22-0760 Stock Speed. Units are fully chrome plated, and fit all hydraulic brake
22-0755 +2” models with disc or drum brakes, for rigid or swing arm frames.
22-0767 +2” with Pirate Pegs Kits use a Kelsey type master cylinder VT No. 23-1735, which
22-0758 +3” is not included with kit. Parts for each shifter side parts include
Note: 3” extended unit 22-0758 not suitable for FLST models correct linkage for either 1952-78 ratchet top or rotary top 1979-
with stock fender. 84 4 Speed.
VT No. Year/Model Top
27-0615 21-0673 22-0713 1952-79 FL-FX Ratchet
22-0714 1979-84 FXWG-FXST-FLH Rotary
Chrome Billet Spacers fit left side shifter
21-0165
with 3-hole and right side brake with 2-hole
21-0223 Billet for 1984-99 Softail or custom application.
Rod for 22-0755
21-0166 Shifter Brake Thick
21-0175 21-0164 .50”
Billet Shifter Rod Kit fits 2” & 3” extensions. 21-0165 21-0166 .75”
21-0223 1986-99 Softail 21-0169 21-0170 1.25”
Replacement Hardware 21-0171 21-0172 1.5”
23-3005 Master Cylinder Only (³⁄₄”) FXST Brake Line Required
23-0859 Master Cylinder Kit (³⁄₄”) Components
28-0607 Matching Grip Set 23-4050 Banjo 10mm 35°
27-0615 Matching Passenger Peg Set 23-8120 Stainless Line 32”
21-0673 Shifter Peg 23-9228 Tee Fitting
28-0634 Shifter Peg Rubber 23-4396 Line Fitting
23-0773 Brake Plunger Rod 23-8020 Stainless Line 12”
21-0785 Plunger Clevis 23-4047 Banjo 10mm Straight
572
Forward
Control Kit
Chrome Forward Control Kit fits 1958-86 Big Twins,
1986-99 FXST custom application. Includes shift and
brake sides including ³⁄₄” bore chrome Kelsey Hayes
style master cylinder. Kit is supplied with O-ring pegs,
but can be replaced with other style of clevis mount
pegs. A universal nylon brake line kit, chrome mount
hardware and 4 and 5 speed styles shifter rods are
also included.
VT No. Item
21-0109 Shifter Lever Only
Brake Control for 1971-85 FX
CLASSIC
22-1057 22-1058
A
B
Chrome FX-FXS Brake Pedal and Plate.

VT No. # OEM Year Item
23-0107 B 50800-71B 1972-Early79 Plate
23-0106 A 42399-72A 1972-Early79 Pedal
23-0904 42399-72B 1972-Early79 Pedal
Chrome FX-FXE Brake Control Kit is a replacement for mid
10-1154 24692-54 1972-Early79 Pivot Washer
style transmission mount on 1972-85 Superglides with parts
Brake Pedal Rubber replaces
pictured. Master cylinder is not included.
42394-65. Fits all FX’s with center
VT No. Year Type
mount brake set up, available in
22-1057 1972-79 Wagner
black or white.
28-0307 28-0308 22-1058 Late1979-82 Kelsey Hayes
VT No. Finish
28-0307 Black
28-0308 White
Brake Lever Spring for FX-FXE models.
VT No. OEM Years
13-0149 42425-71 1971-Early 79
13-9218 42425-79 1979-84
FX-FXE Brake Switch replaces 72005-73A
for rear stoplight on 1973-77 models.
VT No. 32-7766
Clevis Pins are zinc plated, include cotter pins and Rear Master Cylinder Hardware.
washers. Sold in pack of 5 or 10. VT No. OEM # Years Item Finish
23-0133 5983W A 1972-E79 Spacer (2) Zinc
23-0134 5890 B 1979-82 Spacer (2) Zinc
VT No. OEM Use 23-0119 42257-72 C&D 1972-79 Plunger Cpt Chrome
23-0421 42269-30 Brakes 30-69, 82-up, Shifter 52-84 23-0124 42257-79 C&D 1979-82 Plunger Cpt Chrome
23-0464 Parkerized As Above, 5 pack 23-0122 42330-72 D 1972-82 Clevis Chrome
21-1986 42269-70 1970-81 Brakes 23-0247 1972-82 Plunger Chrome
2501-12 Panhead Kit, 1930-69 23-0130 42299-79 E 1979-82 Support Chrome
3210-9 Rear Brake Rod Clevis Pin Kit 23-0421 42269-30 H (10 pack) Pin Zinc
Screw Foot Brake Lever and Bracket Mounting Kit includes nut,
Flag washers and bolts are duplicates of stock hardware for 1936-71
Big Twin.
32-0425 32-0426 VT No. Finish
Hydraulic Brake Switch features heavy duty contacts and 9732-7 Chrome
quality brass terminals. 9733-7 Cadmium
VT No. Type Years Brand 9734-7 Parkerized
32-0425 Screw 1958-68 FL, 1951-68 G V-Twin 9734-7T As Above, V-Twin
32-0434 Screw As Above Accel
32-0426 Flag 1969-84 FL, 1971-84 FX V-Twin
32-0435 Flag As Above Accel
573
Big Twin Mechanical Brake Rigid Brake Parts For 1937-57 Big Twin Models.
VT No. OEM Finish Item
23-0429 41400-37 Chrome Brake Drum Complete
23-0430 41400-37 Black As Above
19-0015 41420-30 Chrome Splash Ring
23-0441 41425-37 Plain Dowel Pin Set
44-0215 41552-36 Chrome Rear Axle 23-0420
44-0294 41552-36 Parkerized Rear Axle
7704-2 41576-36 Chrome Axle Adjuster
8014-2 w/Nuts Cadmium Pair
44-0322 41595-36 Chrome Axle Spacer
8160-4 41596-30 Chrome Sleeve Collar Kit 23-0417
8160-4T 41596-30 Chrome Sleeve Collar Kit
8161-4 As Above Cadmium Includes Nut, Collar and Lock Tab
8161-4T As Above Cadmium
37-8791 41603-35 Parkerized Lock Tab
44-0316 41596-30 Chrome Collar, each
44-0330 41600-36 Chrome Axle Sleeve
23-0415 41650-37 Chrome Backing Plate
23-0420 As above Black Backing Plate
23-1346 Black Backing Plate
23-1333 41650-37 Chrome Backing Plate w/fitting 23-0415
23-0417 41671-37 Plain Cam
23-1342 23-1023 41671-37 Raw Cam
10-0740 41685-37 Standard Cam Bushing
10-2496 41685-37A .015 O.S. Cam Bushing 23-0428
23-1990 41691-31 Copper Cam Shim, 5 pack
23-0500 41805-38 Stamped Shoe Set
23-1750 41805-38 Replica Cast Shoe Set
23-0504 41848-38 Lining Set with Rivets
49-2551 13-0145 41835-30 Shoe Spring Set
23-0418 41870-38 Outside Pivot Cup Kit 23-0418
3 Piece Kit 41872-38 Inside Pivot Cup
41875-38 Complete Pivot Stud
2720-6 Kit Complete Pivot Stud 23-0446
23-0051
23-0066 7 Piece Pivot/Parkerized
23-0068 7 Piece Pivot/Chrome
23-0009 41875-38 Black Pivot Stud Only
23-0067 Kit Pivot/Cam 23-0456
23-0428 41929-36 Chrome Rear Lever
23-0449 As above Parkerized
23-0429 23-0291 23-0430 49-2552 42257-36 Parkerized Rear Rod
23-0423 42257-36 Chrome Rear Rod
23-0902 Replica Chrome Rear Rod 23-0447
23-0903 Replica Parkerized Rear Rod
Rigid Brake Drum Assemblies for 1937- 23-0421 42269-30 Zinc Clevis Pin, 10 pack
57 are complete replacements with sprock- 23-0464 42269-30 Parkerized Clevis Pin, 5 pack
2501-12 Kit Parkerized Clevis Pin Kit
et and dust shield riveted on. Drawn steel 23-0425 42273-30 Chrome Rear Clevis
construction. Replaces 41400-37. 23-0444 As above Parkerized
23-0422 42326-37 Chrome Front Rod
Chrome Black 49-2551 As above Parkerized 23-0448
23-0429 23-0430 23-1342 Parkerized Front Rod Kit, 9 piece 23-0424
23-0051 with wrench 23-1349 Chrome Front Rod Kit, 9 piece
23-0248 Installed 23-0424 42333-30 Chrome Front Clevis
23-0291 23-0248 (Cast) 23-0443 As above Parkerized
23-1341 As above 1937 Front Clevis
23-0104 42402-36 Chrome Foot Lever
23-0156 — Chrome Foot Lever
23-0456 As above Parkerized Replica
13-0150 42427-26 Black Lever Spring, each
23-0104 23-0456 23-0867 23-0942 13-0173 42427-26 Chrome Lever Spring, each
8160-4
23-0105 42480-36 Chrome Lever Bracket
23-0446 As above Parkerized Lever Bracket
23-1563 42480-36 Parkerized Lever Bracket
23-0048 1936 Parkerized Lever Bracket
23-0419 42550-31 Plain Cross Shaft
10-0741 47755-31 Pair Shaft Bushing
23-0868 23-0816 23-0500
23-0977 23-0983 23-0426 42560-37 Chrome Shaft Lever, 2 hole
23-0447 As above Parkerized
Replica Brake Pedals. Rigid and include grease fitting and slot. 23-0427 42556-36 Chrome Shaft Lever, 1 hole
Chrome Parkerized Year 23-0448 As above Parkerized
7820-4 7863 Cadmium Shaft Nut
23-0104 23-0456 1936-57 4 Piece Kit 42575-30 Lock kit 13-0145
— 23-0867 1940-57 9677-4 As Above Parkerized Kit
8409-4 As Above Chrome Kit
23-0942 — 1936 Only 8409-4T As Above Chrome Kit
17-0935 42575-30 Lock Tab, pair
23-0868* — 1936 Only 37-6137 7905 Chrome Nut, 5 pack
23-1563
23-0816* — 1936-38 23-1563 37-6138 7905 Parkerized Nut, 5 pack
37-0709 7789 Parkerized Nut, 5 pack 23-1341
23-0977 23-0983 1936-38 37-0009 7789 Chrome Nut, 5 pack
23-1563 1941-57 37-8660 510 Zinc Cotter Pin
37-8661 534 Zinc Cotter Pin
*Note: Nickel Plated. 37-0799 7060 Parkerized ¹⁄₂” Lockwasher
23-0416 44475-35 Black Lock Plate 23-1706
Foot Brake Lever and Bracket Mounting Kit 23-0452 44475-35 Chrome Lock Plate
includes nut, washers and bolts which are dupli- 2501-12 41692-36 Brake Washer Kit
3210-9 Parkerized Brake Rod Clevis Pin Kit
cates of stock hardware for 1936-71 Big Twin. 23-0069 — Parkerized Brake Switch Clamp
VT No. Finish 23-1706 — Spring Clamp
9732-7 Chrome Replica Foot Brake Lever Stud available with threaded
end or peen-end. Hardware included. Note: Oversize studs
9733-7 Cadmium require purchase of ²³⁄₃₂ ream to refit worn pedals.
9734-7 Parkerized 23-0829 Stock Oversize Year Type
9734-7T Parkerized — 2310-5 1937-57 Big Twin and 45
23-0829 — 1936-38 Plate
23-0048 — 1936 Plate
574
22-0745 22-0746 Mechanical
Backing Plate
Kit for 1936-57
Mechanical Brake
includes plate, 22-0706
springs, shoes,
cam pivot stud
VT No. Replica Finish and plate. Arm
22-0708 22-0745 Chrome not included.
22-0709 22-0746 Black
22-0040 22-0074 Chrome
22-0041 22-0075 Black
23-0295
22-0706
CLASSIC
22-0668 22-0707
23-0876 23-0877
Rear Brake Drum Kits feature backing plate with all compo-
nents installed, including a pre-arced set of brake shoes to fit
the drum supplied. The drum has the 51 tooth sprocket riveted
on with an original style dust ring. Kits are available in black or
chrome finish. Lug bolts included, but axle and sleeve kit must
be purchased separately. 22-0171
VT No. Kit 23-0666
23-0876 Black
23-0877 Chrome
23-0295 Black/Cast Drum
22-0981 Mechanical Drum Assembly, 1937-57
49-0357 49-5515 49-1344 Mechanical Kit for 1936-57 Big Twin is perfect for finishing a
restoration or for forward controls on a custom rigid frame. For
use on mechanical brake frames with a cross shaft tube only.
Hardware is included. Footboards may be used with this kit.
49-0555 VT No. Type
49-0613 22-0706 Chrome
22-0707 Parkerized
22-0668 Parkerized Note: Includes stop lamp switch kit
23-0666 Parkerized Cross Shaft Kit
Rear Brake Assembly for 1936 only fits 61” Overhead Valve. 9677-4T Nut Set
Includes black brake drum, backing plate, rear brake cam, brake 22-0171 Kit, Parkerized except pedal
lever, brake shoe set, brake shoe springs and pivot stud. Mechanical Brake Crossover Shaft Bushing Installation Tool
VT No. Item and Reamer allow bushing to seated in brake tube to proper
49-0555 Rear Brake Assembly depth. Reamer will size bushing to correct I.D. for proper fit of
49-0357 Backing Plate crossover shaft.
49-5515 Black Drum Only VT No. Item 2712-1 16-0878
49-1344 Raw Drum Only 2712-1 Driver
49-0613 1936 Rear Backing Plate 16-0878 Reamer
23-0500
12¹⁄₈” long,
1⁹⁄₁₆” wide
23-1949 23-0055
23-1750 23-1795
Emergency Brake Lock fits mechanical brake pedals on Rigid
1936-57 Big Twins. Brake Shoe Sets fit 1937-57 Big Twin Rigid and are complete
VT No. Item with linings installed. Sold in pairs. Note: When new shoes are
23-1949 Complete installed, they may have to be “arced”. VT No. 23-1795 shoe sets
23-0055 Pedal and Plate Kit are fit to our drums. Pivot Kit includes cam.
23-0504
Wheel Lug Bolts for brake drums. Use tap 16-0807 for ³⁄₈ — 20. VT No. Type Pivot Kit Pivot Kit
Black Chrome OEM Years Fits Cadmium Parkerized
37-8675 23-0440 43530-35A 1936-72 ³⁄₈ — 20
Chrome 37-8691 — 43530-35A 1936-72 ³⁄₈ — 20 23-0500 Stock 23-1830 23-1027
— 37-8919 43531-35 Oversize ⁷⁄₁₆ — 20 23-1795 Arced 23-1830 23-1027
49-0457 — 43531-35 1936-37 ³⁄₈ — 20
23-0090 — 43631-35 1936 ³⁄₈ — 20 23-1750* Cast 23-0986 23-1014
Black 23-0935 — Set, Parkerized 23-0504 Linings Only
*Note: Original Cast Construction
575
1958-69 Brake 1958-69 Hydraulic Brake Kit includes all parts illustrated as
replacement for flat side engine or for use on cone motors
with an outside frame pipe. Available with or without cast iron
22-0747 Wagner style master cylinder
22-0781
VT No. Master Cylinder
22-0747 Without, Zinc
22-0401 Without, Chrome
22-0403 With Chrome
22-0402 With Painted
22-0781 With, Zinc & Rubber Pedal Pad 23-0100
1958-69 Big Twin Rear Brake Components.
VT No. Item Finish
23-0100 Pedal Chrome
23-0101 Pedal Plate Chrome 23-0101
23-1742 Spacers Zinc
13-0147 Spring Chrome
22-0403
13-0175 Spring Chrome 13-0147
13-0146 Spring Parkerized
23-0115 Plunger Chrome
23-0192 Plunger Zinc
16-0432 Tool Locking 23-0115
22-0403 16-0432
Installed
Master Cylinder Cover
VT No. 42-0315
Forward Brake Kit

Brake Kit for 1979-84 22-0506
FLH includes chrome
22-0300 pedal, chrome plate with
front footboard bracket,
plunger, spring and stud.
Order master cylinder 22-0506
separately. Installed
VT No. Item Original Forward Brake Control
22-0300 Chrome Kit VT No.
Assemblies will equip all Big
23-1735 Chrome Master Cylinder 22-1017
Twins with hydraulic brakes and
23-1772 Alloy Master Cylinder Shown
powered by either Evolution or
27-0596 Rear Floor Board Bracket 1970-99 Shovelhead engines.
37-6366 Master Cylinder Stud Available in either Wagner or
Kelsey Hayes styles, with or with-
out master cylinders. Footboards
can be fitted to our Wagner style
kits VT No. 22-0500, 22-0505
Chrome Hydraulic Brake Pedals and Backing Plates. or 22-0506. Wagner styles use
VT No. # OEM Year Item 41761-73 master cylinder, or Kelsey Hayes type 41576-79A, for
23-0120 A 42411-70 1970-78 Big Twin Stop those wishing to utilize their existing master cylinder. Complete
23-1742 50668-35 Spacers for above Spacers assemblies include detailed instructions and diagram for installa-
13-0147 B 42427-58 1958-84 FL Spring tion. Display packaged.
23-0103 D 42402-73A 1970-Early 79 FLH Pedal VT No. Type Note
23-9192 C 42402-79 Late 1979-84 FLH Pedal 22-0500 Wagner Without Master Cylinder
23-0451 E 42480-79 1979-84 FLH Plate 22-0505 Wagner With Plain Master Cylinder
23-0102 F 42401-73A 1970-Early 79 FLH Plate 22-0506 Wagner With Chrome Master Cylinder
22-0501 Kelsey Hayes Without Master Cylinder
22-1017 Kelsey Hayes With Chrome Master Cylinder
*Note: For kits 22-0500, 22-0505, 22-0506, 22-0501, and
28-0313 22-1017, use Russell front line 23-8809 and rear line 23-8915
23-0351 28-0457 for disc brake models, and tee 23-0707.
Footpeg Mounting Studs fit through Wagner or Kelsey
Chrome Forward Brake Pedal allows driver better access to
Hayes master cylinders to mount foot pegs to these
pedal from footboard. Fits 1979-84 FLH.
VT No. Item forward assemblies. Stud side shown accepts that size
23-0351 Pedal footpeg yoke.
28-0313 Pad VT No. Type
28-0457 Pad 37-8986 Kelsey Hayes Type ³⁄₈ — 24
37-8987 Wagner Type ¹⁄₂ — 20
576
Forward Brake
Control Kit
FXST Replica Forward Brake Control for use on all 1970-
99 Big Twin with Shovelhead or Evolution engines equipped
with hydraulic disc or drum brakes. Designed after the 1984-99
22-1001 FXST which places the driver peg in back of the brake pedal,
Installed so the brake is easier to operate from this comfortable position.
22-1001 Redesigned to accept a Wagner or Kelsey-Hayes style master
Installed cylinder or GMA masters, also available with chrome KH or
Wagner style masters. Hardware includes linkage pedal mount
Pedal Shown with Pad 28-0311 Available Separately. plate, rubber covered footpeg. This kit is the exact compliment to
our shifter kits listed and when used with one of these kits, places
the pegs in forward and raised position.
VT No. Item Master Cylinder
22-1066 Dual-use kit Without
22-1001* Complete kit Kelsey type
22-1001 22-1018* Complete kit Wagner type
23-1743 Brake Pedal for Above
CLASSIC
23-1744 Pedal Plate
13-0181 Brake Pedal Spring
23-0984 Pin
Note: Kits VT No. 22-1001 and 22-1018 use Russell stainless
lines VT No. 23-8809 front and 23-8802 from junction to rear cali-
per. Use tee VT No. 23-0707.
Brake Pedal Pads

Brake Pedal Pad features chrome die cast 23-0466 28-0761 Brake Pedal Pad features
backing with black rubber insert pads. Fits chrome die cast backing with
1965-84 FLH. black rubber insert pads.
VT No. 28-2226
VT No. Model
Brake Pedal Pad Only for 1983-up FLT. 23-0466 1984-up FXST, Flame
Replaces 42416-83. 28-0761 1980-up FL, Flame
VT No. 28-2233
FXST Brake Pedal Rubber with stud replac-
es 42532-82. Stock on all 1983-05 FXST
models. VT No. 28-0548
28-0313 28-0313
Rubber Pad Sets
28-0301 28-0302 28-0312
Brake Pedal Pad Kit
VT No. Year/Model Type Color
28-0313 1965-79 FLH Kit Black
28-0310 1965-79 FLH Pad only Black
28-0621 1965-79 FLH Pad only White
28-0071 Pad only Black
28-0304 28-0457
Left Side Right Side

Clutch and Brake Pads in a three piece sets unless noted.
VT No. Color
28-0301 Black
28-0302 White
Slide On Black Brake Pedal Pad replaces 36954-62 on 1936- 28-0551* Black 1 piece *Note: Oval Pad only
84 FL and Rigid brake pedals, slides on. 28-0312 Black, Replica
VT No. Type
28-0304 Stock
28-0457 “H”
28-0070 Stock
577
1958-72 Hydraulic Drum Brake
23-0087
23-0604
Hydraulic Brake Parts for 1958-72 Big Twin.
VT No. # OEM Year Item Rear Brake Drum Assembly features a black finish hydraulic
37-8129 A 9995 1958-72 Clamp, 10 pack
23-0431 B 41400-58C 1958-62 Brake drum, chrome drum and backing plate and a parkerized axle kit.
23-0432 B 41400-58C 1958-62 Brake drum, black *Note: Shoes are wide type. Fits 1971-72 FL, FX.
23-0433 B 41400-63 1963-66 Brake drum, chrome
23-0434 B 41400-63 1963-66 Brake drum, black VT No. 23-0087
23-0435 B 41400-67 1967-72 Brake drum, chrome
23-0436 B 41400-67 1967-72 Brake drum, black 1958-62 23-9240 23-9247
23-0442 1967-72 Race
23-0441 C 41425-37 1958-72 Dowel Pin 1963-72
44-0214 D 41552-58A 1958-66 Axle, chrome
44-0213 D 41552-67 1967-72 Axle, chrome
44-0321 E 41595-58 1958-66 Spacer, chrome
44-0353 E 41595-67 1967-72 Spacer, chrome
44-0354 E 41595-67 1967-72 Spacer, zinc
8160-4 F 41596-30 1958-72 Collar Lock and Nut Kit
8161-4 F As above 1958-72 Cadmium Big Twin Hydraulic Rear Backing Plate Assembly includes
44-0319 G 41596-58 1958-62 Spacer, side plate chrome or black backing plate, with wheel cylinder, shoe set
44-0318 G 41596-63 1963-72 Spacer, side plate
44-0329 H 41600-58 1958-62 Axle sleeve and springs installed. Hose fitting and banjo bolt are supplied.
44-0355 H 41600-63 1963-66 Axle sleeve Order proper brake drum and axle kit separately.
44-0327 H 41600-67 1967-72 Axle sleeve
23-3022 I 41650-58 1958-62 Side plate, chrome VT No. Year Finish Drum Axle Kit
23-0714 I 41650-63 1963-72 Side plate, chrome
23-0715 I 41650-63 1963-72 Side plate, black 23-9241 1958-62 Black 23-0432 44-0562
23-0748 J 41740-58 1958-62 Wheel cylinder 23-9240 1958-62 Chrome 23-0431 44-0562
23-0749 J 41740-63 1963-72 Wheel cylinder
23-0713 K 41743-58 1958-72 Wheel cylinder bolt 23-9242 1963-66 Black 23-0434 44-0582
23-0026 L 41744-58 1958-72 Copper gasket, 10 pack 23-9247 1963-66 Chrome 23-0433 44-0582
23-0755 M 41745-58 1958-62 Swivel fitting
23-0712 M 41750-63 1963-72 Swivel fitting 23-9242 1967-72 Black 23-0436 44-0567
23-0711 N 41749-58 1958-72 Bleeder nipple, 10 pack 23-9247 1967-72 Chrome 23-0435 44-0567
23-0604 O 41748-62 1958-62 Cylinder kit
23-0605 O 41748-63 1963-72 Cylinder kit
23-0501 P 41801-58A 1958-62 Brake shoe set
23-0502 P 41801-63 1963-72 Brake shoe set
23-1989 41802-58 1958-62 Brake Linings A
23-1987 41809-63 1963-72 Brake Linings B
23-0603 Q 41835-58 1958-72 Spring clip set
13-0148* R 41836-63 1963-72 Shoe Spring Set
S 41837-63
13-9233 S 41836-58 1958-62 Shoe Spring Set
41837-58
13-9260 S — 1960-62 Shoe Spring Set Brake Drum Steel Backing Plate for hydraulic drum models
13-0763 Set 1958-62 Shoe Spring have the mount stud and shoe cams installed.
23-0440 T 43530-35A 1958-72 Lug Bolt, Chrome
37-8675 T 43530-35A 1958-72 Lug Bolt, ParkerizedChrome Black # OEM Years
23-0716 U 42300-58 1958-62 Hose 23-3022 23-3027 A 41650-58 1958-62
23-0717 U 42300-63 1963-72 Hose
Brake Shoe Retainer Clip replaces 41835- 23-0714 23-0715 B 41650-63 1963-72
58, fits 1958-72 FL-FLH models. Sold in pairs. 23-0431 Rear Hydraulic Cast Brake Drums are com-
VT No. 23-0603 plete replacements with sprocket riveted on.
Lug Bolt Kit includes 5 lug bolts Chrome Black Years Type
and “T” wrench. 23-0431 23-0432 41400-58C 1958-62
VT No. Lugs 23-0433 23-0434 41400-63 1963-66
49-0830 Parkerized 23-0435 23-0436 41400-67 1967-72
49-0830 23-1207 23-1207 Chrome — 23-0930 Kit 1963-66
Wheel Lug Allen Wrench fits all 23-0749 Wheel Cylinders and Kits are replacements for
16-0102 front and rear wheels 1935-72 FL stock units. The cylinders are completely assembled,
models. and ready for installation.
VT No. Item Wheel Cylinders
16-1789 16-1730 16-0102 Lug Wrench VT No. OEM Year
16-1730 Drive Socket 23-0748 41740-58 1958-62
16-1789 T-Handle 23-0749 41740-63 1963-72
Brake Drum Dowel fits all rear drums. Rebuild Kits
1937-72. Five piece set. 23-0604 41748-62 1958-62
VT No. 23-0441 23-0605 1963-72
578
23-1735 23-1772 23-0769
Master Cylinder
23-0750 23-0050 23-0025
23-0752
23-9179 Wagner Style Master Cylinder. Drum Type for 1958-72, disc
Kelsey Type Master Cylinder. Alloy style for 1979-85 models type 1973-Early 79. Units are assembled with internals and
complete with internals. include cap and boot.
VT No. OEM Type Fits Drum Disc Finish
23-1735 41754-79A Chrome 1979-84 FLH 23-0750 23-0751 Painted Silver
23-1772 41754-79A Alloy As Above 23-0752 23-0753 Chrome
23-0769 42453-80A Chrome 1980-83 FXWG 23-0050 — Silver
1979-84 FXS 23-0025 — Silver
23-9179 42453-80A Polish As Above
23-0735 23-0905 Master Cylinder Cap.
23-3004 VT No. Fits
CLASSIC
23-0734 Chrome Cap
23-0735 Black Cap
23-0905 Zinc Cap
23-3003 23-0878
15-0202 Top Gasket, 10 pack
Billet Master Cylinders feature Wagner or Kelsey Hayes style *Note: Fits over existing cap
mount holes ⁵⁄₈”bore.
secured by set screw.
VT No. OEM Type
23-3003 Kelsey-Hayes ⁵⁄₈” bore Inline
23-3004 Kelsey-Hayes ⁵⁄₈” bore Offset Chrome Rear Master
23-3034 Wagner ⁵⁄₈” bore Inline Cylinder Covers.
23-3033 Wagner ⁵⁄₈” bore Offset
VT No. Fits
23-0878 Rebuild Kit for 23-3003/23-3004
42-0315 42-0316 42-0315 1958-79 FLH
23-0860 Rebuild Kit for 23-3034/23-3033
42-0316 1979-84 FLH
24-0601 23-1961
23-0617 23-1718
Chrome Rear Master Cylinder Cover fits FL-FX Kelsey style.

VT No. Style Year
23-0617 Smooth 1979-up
24-0601 Finned 1979-84
23-1720
23-3029 Chrome Billet Master Cylinder
Reservoir replaces original plas- 23-1717
tic unit on 1982-86. Rear Master Cylinder Rebuilds
VT No. 23-3029 VT No. OEM Fits
23-1718 41762-58A 1958-79 Big Twin
23-1961 Deluxe Kit 1958-79 Big Twin
Rear Master Cylinder Boots are sold each. 23-1717 42374-77B 1979-84 FL, 80-86 FLT
VT No. Fits 23-1720 42374-82A 1983-85 FX 4-speed
28-0501 1958-69 FL 1984-86 FXST-FLST
28-0502 1970-78 FL-FX 23-0115 23-0116
28-0503 1979-84 FLH, 1978-82 FX
28-0504 1983-85 FX
28-0505 1979-86 FLT
28-1955 41764-58 41764-70, 5 early and 5 late 23-0117 23-0118
23-0119 23-0124
Chrome Brake Plunger Assemblies.
23-0122
VT No. OEM Fits
Thread Chart 23-0115 41770-58 1958-69 FL
OEM Rear Master Cylinders
Kelsey-Hayes. Late 1979-84 FL, FX; 80-85 FXWG, FLT 23-0116 42333-70 1970-79 FL, 3” long
Wagner-Lockheed. 58-Early 79 FL, FX
23-0117 2333-79 1979-84 FLH, 3³⁄₈” long
3/8-24 Inverted Flare 23-0118 40923-79 1979-81 FLT
(Girling type) 83-Early 87 FX, 1982-Early 87 FXR
3/8”-24 Inverted Flare (to caliper) 23-0119 42257-72 1972-79 FX
1/8” NPT (to reservoir master cylinder)
All Late 1987-2002 Big Twin , TC/B, XL 23-0124 42257-79 1979-82 FX
All H-D Brake Tees 23-0122 42330-72 1972-82 FX Clevis only
3/8”-24 Inverted Flare (brake line)
1/8 NPT (brake light switch)
23-0247 1972-82 Plunger only
579
Replica Brake Line
23-0601
23-0717
23-0730
23-0716
23-0719 23-0720 23-2288

23-0732
23-0723
23-0741
23-0755 23-0712 23-0713 23-0026 23-0080
23-2294
Rear Brake Hoses are made of rubber, OE replacements. All
hoses are D.O.T. approved.
VT No. OEM Years Model
23-0716 42300-58 1958-62 FL
23-0717 42300-63 1963-72 FL-FX
Hoses Listed are stock rubber construction and D.O.T.
23-0601 7988 Hex Nut and Lockwasher for Above
approved.
7242
VT No. OEM Length Fits
23-0719 45151-78 1979-83 FX
23-0730 45120-72A 44¹⁄₂” 1972-81 FL-FLH
23-0720 42300-73A 1973-80 FLH
23-0732 45521-74A 40” 1974-77 XL-FX
23-2288 40912-81 1981-84 FLH
23-0723 45121-77 19” Upper & Lower 1978-79 FX
23-0755 Wheel Swivel Fitting, 1958-62
FXE, 1977-79 XL Lower only
23-0712 Wheel Swivel Fitting, 1963-72
1980-82 FX-FXE Lower only
23-0713 Bolt
23-0741* 45124-83 41” 1983 FXSB
23-0026 Brake Line Copper Gasket
*Note: Hose is one piece dual disc hose with built in junction
23-0080 Brake Fitting Kit
block.
Rear Steel Brake Lines are
available in chrome or zinc plat- Brake Hose Fittings for front master cylinder,
ed. Front fits between master chrome.
cylinder and junction. Rear is VT No. OEM Model Type
from junction toward rear caliper. 26-0622 23-1988
26-0622 43307-78 FX-XL Angle
Order rubber hose for final con- 23-1988 63609-72 FLH Straight
nection to rear wheel cylinder or 23-0517 Converts 10mm late threads to ¹⁄₈”
caliper separately. NPT with inverted flare, early thread hose
23-0517
Note: Chrome & zinc steel type, straight.
brake lines will have oxida-
tion under nuts due to plating
process.
23-0700 23-0761
23-0701 23-0762
32-0425 32-0434 32-0426 32-0435 32-0443

1951-84 Hydraulic Brake Switch.
Chrome Zinc OEM Fits Type VT No. Type Brand
23-0700 23-0761 42302-58 1958-69 FLH Front Section 32-0425 Screw Replica
23-0701 23-0762 42304-70A 1970-78 FLH Front Section 32-0434 Screw Accel
23-0704 23-0763 42304-79 1979-84 FLH Front Section 32-0426 Flag Replica
23-0703 23-0764 42301-58A 1958-69 FLH Rear Middle 32-0435 Flag Accel
Section 32-0443 Flag Replica
23-0702 23-0765 42303-70A 1970-72 FLH Rear Middle Brake Brass Rivets.
Section VT No. OEM Type Use U/M
— 23-9023 45150-79 1979-83 FXE Front Section 37-8805 — Short 4-4¹⁄₂ Brake 100
— 23-9182 41004-82 1983-E84 FX Front Section 37-8806 41871-31 Long 4-5 Brake 100
— 23-0121 42314-71A 1970-84 FLH Bracket *Note: For clutch hub friction disc.
580
23-8020 23-8002
Universal Brake
Fitting & Bolt
23-8010
10mm Russell Street Legal Universal Brake Lines are build it

yourself line assemblies ready for adapter fittings. They are pre-
assembled with high performance #3 stainless braided hose with 23-4051
23-4054 23-4279 23-4244
a rugged veloprene coated inner, and crimp-on chrome plated
female swivel hose ends. Clear coated for abrasion resistance. 23-4050 23-4047
Meet the guidelines of the D.O.T. MVSS-106 requirements and 23-4053 23-4052
are 50-state legal, and compatible with all brake fluids.
23-4283
23-8352 4” 23-8110 30” 23-8272 56” 23-4293
23-4298
23-8002 6” 23-8120 32” 23-8282 58”
23-8010 9” 23-8130 34” 23-8229 60” 23-4396
23-8020 12” 23-8342 36” 23-8332 62”
23-8030 15” 23-8140 38” 23-8312 64”
CLASSIC
23-8362 16” 23-8242 40” 23-8322 66” 23-4281 23-4380
23-8040 17” 23-8150 42” 23-5833 68” 23-4282
23-4284
23-8212 18” 23-8252 43” 23-5835 72”
23-8050 19” 23-8262 44” 23-5836 74” Chrome Adapter Fittings see listing for application.
23-8060 21” 23-8192 45” 23-5840 80” *Note: Most common use
23-8070 23” 23-8372 46” VT No. Fitting Type Adapts To:
23-8080 25” 23-8160 47” 23-4047 10mm Banjo, Straight
23-8090 26” 23-8202 50” 23-4050 10mm Banjo, 35° 23-4055
23-8100 28” 23-8170 52” 23-4055 10mm Banjo, 45°
23-8180 54” 23-4051 10mm Banjo, 90°
23-4052 ⁷⁄₁₆” Banjo, Straight
Chrome Banjo Bolt Kits are for use with uni-
23-4053 ⁷⁄₁₆” Banjo, 35°
versal or stock lines, front and rear. Washers
23-4056 ⁷⁄₁₆” Banjo, 35°
are included. The VT No. 37-8979 is to be 23-4054 ⁷⁄₁₆” Banjo, 90°
used when a master cylinder or caliper uses 23-4057 12mm Banjo,Straight
23-0612
a ³⁄₈-24 banjo bolt and the line has a 12mm 23-4058 12mm Banjo, 35°
hole instead of 10mm. 23-4059 12mm Banjo, 90°
VT No. Line Size/Item 23-4244 ¹⁄₈” Male NPT, Straight
23-0612 10mm ³⁄₈-24 23-4279 ¹⁄₈” Male NPT, 90°
23-0613 10mm Washers 23-4293 ¹⁄₈” Male NPT, 45°
23-0614 12mm ⁷⁄₁₆-24 23-4298 Male “T”
23-0615 12mm Washers 23-6033 Flare Union
37-8979 12mm ³⁄₈-24 (Special Kit) 23-6034 ³⁄₈”-24 Banjo Bolt 23-6033
14-0568 10mm Washer with O-Ring 23-6035 ⁷⁄₁₆”-24 Banjo Bolt

23-6040 10mm x 1.25” Banjo Bolt
14-0567 12mm Washer with O-Ring
23-6041 12mm x 1.25” Banjo Bolt
Chrome Banjo Bolts include seal washers.
23-6042 10mm x 1.25” Double Banjo Bolt
VT No. Size MM Style 23-0746 ³⁄₈”-24 Brake Switch Banjo Bolt
2190-3 ³⁄₈ - 24 10 Dome 23-6037 35° Rear Banjo, 10 mm
2191-3 ³⁄₈ - 24 10 Allen 23-6038 90° Short Rear Banjo, 10 mm
2190-3 2192-3 ⁷⁄₁₆ - 24 12 Dome 23-6039 90° Long Forward Control Banjo, 10 mm
2193-3 ⁷⁄₁₆ - 24 12 Allen 23-4396 ³⁄₈”-24 Male Inverted Flare, straight, 2 pack
Brake Banjo Seal Washers feature built in O-Rings. 23-4380 ³⁄₈”-24 Male Inverted Flare, 90° and 120°
*Junction block to master cylinder
23-4281 ³⁄₈”-24 Male Inverted Flare, 45° 23-4306
VT No. Type *Rear Calipers
14-0567 ⁷⁄₈”, 12mm fits handlebar cylinders 23-4282 ³⁄₈”-24 Male Inverted Flare, 90°, short
1984-00, single disc *Junction Block to Front Caliper
14-0568 ³⁄₈”, 10mm fits 1982-00 dual disc 23-4283 ³⁄₈”-24 Male Inverted Flare, 90°, long 23-4307
*Junction Block to Front Caliper
Brake Calipers
23-4284 ³⁄₈”-24 Male Inverted Flare, 150°
14-0578 2001-up master cylinder and brake calipers *Forward Controls
14-0048 2006-up Banjo Bolts 23-4306 Front Wide Glide Junction Block
23-4305
Allen Button Head Banjo Bolts are sold with 23-4307 Front Narrow Glide Junction Block
washers. 23-4305 90° long forward control banjo, 10 mm
VT No. Size MM 23-4303 35° short rear brake banjo, 10 mm
37-8517 ³⁄₈-24 10mm 23-4304 90° short rear brake banjo, 10 mm 23-4303
37-8518 ⁷⁄₁₆-24 12mm
23-4304
581
Stainless Brake Line
FX Series Refer to next page for diagram.
23-8915 23-8900
Year Model Front Type Rear Diagram#
1974-76 FX-FXE 23-8900 1 23-8915 19
As Above +4 Ext 23-8901 1 23-8915 19
As Above +8 Ext 23-8901 1 23-8915 19
1977 FXS 23-8902 5 23-8915 19
1978 FXS 23-8704 5 23-8803 6
1977-79 FX-FXE-FXEF 23-8703 5 23-8803 6 23-8803 23-8901
1979 FXS — 5, 14 23-8803 6
1980 FXE-FXEF — 5, 14 23-8803 6
1980 FXS — 5, 14 23-8803 6
1980-83 FXWG — 5, 14 23-8802 6
1980-81 FXB — 5, 14 23-8803 6
1981 FXS 23-8711 5, 14 23-8802 6
1981 FXWG 23-8711 5, 14 23-8802 6 23-8802
1982 FXWG — 5, 22 23-8802 6
1982 FXE — 5, 22 23-8803 6
1982 FXS-FXB — 23-8803 6
1982-83 FXR — 5, 22 — 3 23-8810
1983 FXWG-FXDG — 5, 24 23-8810 2
1983 FXE 23-8734 5, 24 23-8803 6
Brake Tee
23-9228 Billet Aluminum Brake Tee 23-3769 Chrome Billet Round Brake Tee has 2
VT No. Type inverted flare ³⁄₈”-24 threaded holes, 1/8"
23-9227 Front ³⁄₈”-24 inverted flare in all 3 holes National Pipe Thread center hole. To
23-9228 Rear ³⁄₈”-24inverted flare make installation of dual disc front brake
in 2 holes and ¹⁄₈ NPT in center hole lines neater we have a special, widened
Universal Straight Chrome Union with bracket. tee to keep the lines away from your front
VT No. Thread fender.
23-0635 ¹⁄₈” NPT VT No. 23-3769
23-0688 ³⁄₈” - 24
23-0570 23-0571 23-0572

Chrome Steel Brake Line Tees have a ⁵⁄₁₆” mounting hole.
VT No. Type
23-0570 Center hole inverted flare ³⁄₈”- 24 UNF, side
tubes ³⁄₈”- 24 UNF
23-0571 Center hole ¹⁄₈” - 27 NPT,side tubes
23-0708 23-0705 23-0709 23-0707 ³⁄₈” - 24 UNF
23-0572 Center hole and side tubes ¹⁄₈” - 27 NPT
23-0939 Maltese Style
A B
23-0027
23-0710 23-0611
Chrome Front and Rear Replacement Brake Tees. Front Chrome Brake Line Clamp fits under triple tree to
Front OEM # Model secure stainless brake line. Mount hole is ¹⁄₄ — 20.
23-0708 44311-80 B 1980-82 FXWG VT No. Type
23-0705 43310-77 D 1977 FXS & 1979-84 All FX models 23-0675 A
except FXWG 23-0686 B
1979-81 XL, XLCH, XLS
Rear OEM # Model
23-0709 83566-51 C 1958-69 FL
23-0707 42318-72 E 1972-84 FL, 1977-79 FX,
1980-82 FXWG
23-0710 42309-70 F 1971-72 FX and 70-83 with sidecar
23-0611 42311-58 G Brake Tee Plug 5 pack
23-0027 45152-78 H Tee Bracket FX-FXST Chrome
582
Brake Line
CLASSIC
FL Touring/Dresser Series
Year Model Front Diagram# Rear Diagram#
1963-72 FL 23-8914 7
1972-80 FL-FLHS 23-8903 6 23-8802 6
As Above +4” Ext 23-8904 6 23-8802 6
23-8802 As Above +8” Ext 23-8905 6 23-8802 6
23-8703 1981 FLHS 23-8708 23-8802 6
1981 FLH 23-8708 23-8809 4
1982 FLHS — 11 23-8802 6
1982-84 FLH — 11 23-8809 4
As Above +2” Ext — 11 23-8809 4
As Above +4” Ext — 11 23-8809 4
Upper Dual Disc Front Lines (sold each)
VT No. Model Type Diagram
23-8903 23-8908 1978-79 FX-FXE Stock 19” 5
23-8959 1978-79 FX-FXE -2” 5
23-8909 1978-79 FX-FXE +2” 5
23-8910 1978-79 FX-FXE +4” 5
23-8911 1978-79 FX-FXE +6” 5
23-8912 1978-79 FX-FXE +8” 5
23-8906 1977-81 FX Stock 14” 5
23-8952 1980 FXWG Stock 22¹⁄₂” 14
23-8908 23-8919 1982-83 FLT 26” 10
23-8926 1983 XLH-FXE-FXWG Stock 24” 12
23-8951 1981 FXE-FXWG Stock 24” 14
Lower Lines-Dual Disc Lower Lines (2 required, sold each)
23-8906 23-8908 1978-82 FX-FXE Stock 19” 5

23-8909 1978-82 FX-FXE +2” 5
23-8910 1978-82 FX-FXE +4” 5
23-8911 1978-82 FX-FXE +6” 5
23-8952
23-8912 1978-82 FX-FXE +8” 5
23-8909 1977-82 FX, 1982-83 FXR- Stock 21” 5
FXRS
23-8910 1977-82 FXS-FXB-FXWG +2” 5
1982-83 FXR-FXRS
23-8911 1977-82 FXS-FXB-FXWG +4” 5
1982-83 FXR-FXRS
23-8942 1981 FXE-FXE 23” 14
23-8942 1981 FXE-FXE 25” 14
23-8908
23-8909
583
Caliper and Wheel Kit
Chrome Rear Wheel/Brake
52-0600 Assembly for 1973-85 FX-FLH
includes chrome 16” x 3.0 Wheel
Assembly, chrome caliper, chrome 51T
sprocket with bolts, 10” or 11¹⁄₂”rear
drill brake disc, brake disc bolts,
chrome caliper bracket, caliper support
spring and chrome stay bar with bolts.
VT No. Caliper Type
52-0600 10” Edart Rear Disc Kit fits stock rigid frame appli-
52-0601 11¹⁄₂” cations. Disc is 49T sprocket with caliper and
pads, axle, and sleeve and spacer to use with
Rear Disc Kit OE style star hubs.
VT No. Item
22-0773 Kit
“Sprotor” 23-0785 49T Sprocket
22-0373
23-0897
Edart Caliper-Disc Set includes 2 piston chrome billet caliper,
Edart Sprotor Kit includes 48T stainless disc sprocket. polished rotor/sprocket combination with 49 teeth for 1” or ³⁄₄”
VT No. Item axle. Order bolt kit separately.
23-0897 Kit VT No. Item
23-1704 Replacement Brake Pad Set 22-0373 Kit
23-0785 Disc-Sprocket
23-0799 Rebuild
23-4508
Front Caliper
23-4503 23-4513
Components
23-4520 PA2 GMA Caliper Piston, pair,
23-4521 PA4 GMA Caliper Piston, pair, fits 23-4508
23-4509 PA1 Caliper Piston, pair, fits 23-4503
GMA Billet Aluminum Brake Calipers are machined from billet 23-4510 RB1 Caliper O-Ring Seal Kit fits 23-4503, 23-4513, 23-9205
aluminum and clear anodized. Units feature dual pistons which are 23-4522 RB-4 Caliper O-Ring Seal Kit fits 23-4508
internally connected, brake pads and brackets, when provided. They 23-4512 A-Pad SBS Brake Pad Set fits Calipers: 23-4503/23-4502/
include spacers and hardware necessary for installation. Hoses and 23-4500/23-4501
23-9169 F Pad SBS Brake Pad Set fits Calipers: 23-4508, 23-9205
brake discs are not included. 23-4514 B Pad SBS Brake Pad Set fits Calipers 23-4513
Front
23-4503 FLH10 1973-83 FLH Front. Use ⁵⁄₈” bore master cylinder
23-4508 400 1977-83 FX-XL Dual Kit, 8 piston
1980-83 FXWG. Use ³⁄₄” bore master cylinder
23-4513 200E 1974-77 FX Single Disc. Use ⁵⁄₈” bore master cylinder
Rear Calipers
23-4502
23-4501
23-4500
GMA Billet Aluminum Brake Calipers are machined from billet aluminum and clear anodized. Units feature dual pistons
which are internally connected, brake pads and brackets, when provided. They include spacers and hardware necessary for
installation. Hoses and discs are not included. Use with ⁵⁄₈” bore master cylinders.
VT No. GMA Model Components
23-4500 115 1981-84 FX-FL. Use ⁵⁄₈” bore master cylinder and 11.5” disc 23-4509 PA1 Caliper Piston, pair, fits 23-4500, 23-4501
23-4510 RB1 Caliper O-Ring Seal Kit fits 23-4500, 23-4501
23-4501 100 1973-80 FX-FLH. Use ⁵⁄₈” bore master cylinder and 10” disc 23-4512 A-Pad SBS Brake Pad Set fits Calipers:23-4500, 23-4501
23-4502 R10 Rigid Frame with 10” brake disc
584
23-2216 1973-84 Big Twin
Rear Disc Kit
23-3028 22-1068
23-2214 23-1109 22-1067
CLASSIC
Caliper Conversion Kit with 11.5” brake disc updates 1973-82
FX-FL models from 10” to 11.5” brake discs. Includes caliper
bracket, 11.5” drilled brake disc in stainless or zinc plated steel,
mount bolts and the dual piston caliper. By converting to this
style caliper, rattle and chatter will be eliminated and a much
23-1024 greater stopping power will be achieved. Calipers should be
Caliper Conversion Kit includes 11.5” brake disc, caliper
used with master cylinders listed below. Use with 5/8” bore mas-
mounting bracket and caliper assembly. It helps eliminate cali-
ter cylinder.
per rattle and chatter.
VT No. Rotor Year VT No. Item Brand
23-2216 Steel 1973-82 22-1067 11.5” Kit with Stainless Steel Disc GMA
23-2214 Stainless 1973-82 22-1068 11.5” Kit Complete with Steel Disc GMA
23-1109 Chrome/SS 1973-82 23-3028 Kelsey Type Master Cylinder Edart
23-1024 Chrome/SS 1982-86 23-8915* Rear Line Stainless Steel Russell
23-8809* Front Line Stainless Steel Russell
23-0707* Brake Tee
*Note: For fitting forward FXST style control assemblies.
10” Caliper Kit Rear Caliper Kit
23-2211 features all parts as
pictured. The kit fits
1973-80 FX-FL and
includes black or
chrome rear caliper,
10” steel drilled disc,
Black Rear Caliper Kit includes a black caliper and chrome bolts, chrome
bracket with all internal parts. VT No. 23-1431 support bracket and
anchor bar with bolts.
Brake Assembly Kit for 1958-85 Big Twin
Swingarm/Brake
Assembly Kit for
22-1087
1958-85 FL-FX
contains all parts
pictured, for stock
tire width. Includes
chrome swingarm
with pivot pin
and bearing kit,
chrome caliper and bracket, caliper anchor arm, 10” or 11.5”
drilled steel (zinc) rotor, 16” x 3” complete chrome wheel, 51T
chrome sprocket, 12” FX (spring) or FL covered shock set with
VT No. Finish Disc Brand
shock studs and chrome axle assembly.
23-2210 Black Steel Replica
VT No. Disc Shock 23-2211 Chrome Steel Replica
55-0602 10” FX 22-0540 Chrome Stainless Replica
55-0604 11.5” FX 22-1087 Alloy Steel GMA
55-0605 11.5” FL
585
1973-82 Banana Caliper
23-2218 23-2215
23-2219 23-2237
23-2240 23-2227 23-9193 for 23-2227 23-2217
2855-7 Rear Brake Caliper Guide Pin

23-3055 Kit for 1982-Early 87.
VT No. Year Model
23-0693 1982-87 FX
2855-7 1980-85 FLT
23-0693
23-3051 1972-84 Front and 1973-80 Rear Chrome
Caliper Assemblies are fully assembled with disc pads and all Caliper Cover Kit includes mount studs.
internals for rear FX-FL models and front FL models. Calipers VT No. 42-0312
accept ¹⁄₈” NPT line.
Front
VT No. OEM Years Finish 1973-80 FLH-FXE Caliper Bracket will
23-2219 44104-72A 1973-80 Black accept stock 1981-82 caliper.
23-2237 44105-72 1973-80 Chrome VT No. Size Finish
Rear 23-0524 10” Chrome
23-2218 44105-72 1973-80 Black' 23-0542 11¹⁄₂” Chrome
23-2205 44105-72 Black 23-0524 23-0801 11¹⁄₂” Polish
23-2215 44105-72 1973-80 Chrome VT No. Type
23-2240 44105-72 1973-80 Chrome 23-0578 Bushing for Pin
23-2227 44011-81 1981-82 Chrome Dual Piston for 11”
23-9193 Kit 1981-82 For Above Caliper Mount Bracket for 11.5” brake discs
23-2217 44011-81 1981-82 Black replaces 44027-82 and fits 1982-Early 87
23-3051 44011-81 1981-82 Chrome FXST Big Twin with 11¹⁄₂” rotors only.
23-3055 44050-82A 1982-86 Chrome VT No. Finish
23-9033 Black
23-0841 23-0898 Chrome
Caliper Support Bar Bolts secure bar to

23-2257 caliper bracket and swing arm on 1973-85
FX-FL models.
VT No. Finish Brand
23-9186 37-8135 Chrome V-Twin
9106-8 Chrome Colony
9107-8 Cadmium Colony
23-0111 Chrome Caliper Anchor Arm
23-3065
for 1983-86 FL-FX models
23-0861 replaces 41039-82.
VT No. 23-3065
23-1729
Chrome Clevis Pin replaces 40919-81 on
Caliper Mount Bracket and Anchor Arm is for FX-FL with a rear caliper bracket. It includes washer and
10” rotor. cotter for 1981-85 Big Twin.
Chrome Black OEM Year Item VT No. 23-1749
23-2257 23-0841 44166-73 1973-80 Mount Bracket
23-9186 Special Rigid Mount Bracket
23-1729 44154-73 1973-82 Anchor Arm 12⁵⁄₈” length
23-0861 Special 1973-82 Anchor Arm 10⁵⁄₁₆” length
23-0111 1973-80 Caliper Support
586
Rear Caliper Kit
23-1016 1973-80 FX-FL Caliper
Kit with bracket with
bushings. Caliper
includes all internal
parts.
VT No. Finish
23-0539 Chrome
23-0798 Black
23-0539 23-0798 23-1016 Black
Caliper Rebuild
Brake Rebuild Kit includes all Disc Caliper Bleeder Screw Repair Kit for
components pictured to fit 1973- replacing stripped threads in 1972-83 alloy cal-
80 banana rear calipers. Kit also iper housing.
includes an oversize ground pin VT No. 23-0110
CLASSIC
to repair elongated mount hole in
caliper body. VT No. 23-1756 37-8265 23-1731
A Bleeder Screws available in 10 pack.

VT No. OEM Size Fits
23-0113 23-0114 B 23-0711 41749-58 ¹⁄₄ — 28 1958-77 Caliper and
Wheel Cylinder
D
37-8264 Chrome ¹⁄₄ — 28 As Above, 5 pack
23-1731 44146-77 ³⁄₈ — 24 1977-86, Late 1987-89
(A) Caliper Pin Replacement Kit for Big Twin Front or Rear Calipers
eliminates brake squealing, grinding, caliper wobble. Kits 37-8265 Chrome ³⁄₈ — 24 As Above, 5 pack
include mounting stud, locknut and washer, 2 brake pad Speed Bleeders by Russell feature a built in
pins and stainless steel caliper mounting bracket bushing. check valve and replaces the original bleeder
Replaces 44331-73 for 1973-80 Big Twins. screw for a permanent installation. Sold in pairs.
VT No. OEM Item VT No. Size
23-1727 Kit Complete 23-0520 ¹⁄₄”
23-0113 45822-75 Short Bushing 23-0521 ³⁄₈”
23-0114 45821-75 Long Bushing
(B-C) Rear Caliper Parts are available as complete rebuild
kit or as individual parts. 51-0845
VT No. # OEM Item 51-0513
23-1732 B 44107-72 Mount Pin, each
23-1733 C 44124-72 Pad Pins, 10 pk 51-0511 51-0512
(D) Oversized Caliper Mounting Pin Rebuild Kit replaces Weld On Mount Tabs fit Rigid Frames when mounting brake
stock mounting pin, by boring caliper hole oversize. Gives units.
longer life of caliper housing before replacement. Complete kit VT No. Type
with instructions. 51-0511 Hydraulic Rear Back Plate
VT No. 23-1736 51-0512 Caliper Arm Tab
Chrome Caliper Mount Bolt Kits mount 51-0513 1987-99 Caliper Mount Strap (Right Side)
through caliper to bracket on Big Twins. 51-0845 1987-99 Caliper Mount Strap (Left Side)
VT No. OEM Type Year/Fits
23-1726 44134-72A 12 Point 1973-80 BT, Rear B
A C
1972-80 BT, Front
2088-8 44134-72A Allen 1973-80 BT,Rear 37-0508
1972-80 FL,Front
Vibration Clips fit as replacement to dampen pad rattles.
37-8672 — Allen As Above,Front
VT No. # OEM Year Type
23-0600 44132-72 Washers For Above
23-1753 A 41768-73 1973-78 Front, FL
37-0508 44201-82 Allen 1982-84 FX, Rear
23-0112 B 41670-73 1973-81 Rear, FX-FL
23-9176 C 44211-82 1981-83 Rear
587
Dual Disc Front Caliper 1977-83 FX
B Style
A Style 23-0550 23-2220
23-0259
23-1119 23-1122
Dual Disc Front Disc Calipers includes body, piston, seals.
Dual type fits 1977-83 FX-FXWG with 10” brake discs. Order
mounting hardware separately.
VT No. Side Finish Style
23-2221 Right Black A
23-1121 Right Chrome A
23-2238 Left Black A
23-1214 23-1119 Right and Left Flat Black A
Chrome Dual Rotor Caliper and Rotor Set includes two 23-1122 Right and Left Black, ET B
chrome calipers and two drilled rotors. Fits 1977-83. 23-2220 Right and Left Chrome, Daytona B
VT No. Item Rotor 23-0550 Right and Left Chrome, ET A
23-0250 Caliper Rotor Set Zinc Steel
23-0258 Caliper Rotor Set Polished Stainless Steel
23-0259 Caliper Rotor Set Stainless Steel
23-1214 Caliper Rotor Set Zinc Steel
Black
8831-10* Bolt Set FXWG
8758-10 Bolt Set XL-FX
*Note: Two kits required.
Chrome Lower Slider Set Only fits 1977-82

dual disc 35mm forks.
VT No. 24-0541
1977-83 FX Dual Disc Caliper Hardware.

VT No. # OEM Item
Caliper Inserts 23-0509 A 44098-77 Pad Set (4)
23-9198 B 44141-77 Seat, brake hose 24-1731
Chrome Round Caliper Insert fits 1977-83 23-1731 C 44146-77 Bleeder Fitting
dual calipers. 23-0607 D 44151-77 Seal, piston
VT No. 37-8970 44153-77
23-2278 E 44157-77 Piston
37-8970 23-0523 F 44158-77 Plate, Outer
24-0603
44161-77 Plate, Inner
Narrow Glide Axle Cap with alloy finish. Fit 1973-83
23-1734 G 44162-77 Pin
FX models with 35 and 39 mm fork tubes.
24-0602 H 44173-77 Screw
VT No. OEM Fits
44174-77
24-0505 45410-75 Left
37-8970 I — Chrome Insert, Each
24-0504 Chrome Left 24-0602
24-0603 J 46018-77 Mount Bushing Set
Thread Chart 46019-77 Set of four, lower (2), upper (2)
OEM Rear Master Cylinders
Kelsey-Hayes. Late 1979-84 FL, FX; 80-85 FXWG, FLT
Wagner-Lockheed. 58-Early 79 FL, FX
(Girling type) 83-Early 87 FX, 1982-Early 87 FXR
3/8”-24 Inverted Flare (to caliper)
1/8” NPT (to reservoir master cylinder)
All Late 1987-2002 Big Twin , TC/B, XL
All H-D Brake Tees
3/8”-24 Inverted Flare (brake line)
1/8 NPT (brake light switch)
588
1974-77 Front Caliper
23-4513
Front Caliper Service Fix

Kit for 1974-77 includes seal
kit, spring, pins and bleeder
screw.
23-0626 VT No. 23-0148
Single Caliper Pieces for 1974-77 FX.
Single Disc Caliper Kit for 1974-77 FX includes billet caliper, VT No. # OEM Item
11.5” drilled zinc plated steel rotor and mount bolts. 23-1723 K 44275-74 Piston
VT No. Item 12-0943 L 44274-74 Piston, Friction Ring
23-0626 Kit 23-0514 A&B 44281-74 Pad Set
23-4513 Caliper and Bracket (GMA) 23-0606 E&F 44277-74 Caliper Seal Kit
44278-74
23-0148 Kit Service Kit includes C, D, E, F, G, N
CLASSIC
23-1747 C&D 44280-74 Caliper Pin Set, Two piece
44283-74 Set
23-1995 H 44272-74 Anchor Arm
I 44276-74 Plate, Floating Lining
23-0564 23-0565 23-0065 — Anchor Arm Only
37-8996 M Kit Mount Bolt Kit Chrome
Caliper Kit for 1974-77 FX includes zinc or polished stainless
23-1730 J Complete Black Caliper Assembly with A-F+H,I
steel 11.5” brake rotor.
23-0711 N 41749-58 Bleeder Screw
VT No. Disc Rotor Caliper
8759-5 O 41191-74 Chrome Rotor Screw Set
23-1003 Steel Zinc Black
23-0564 Steel Zinc Chrome
23-0565 Stainless Steel Polished Chrome
23-1730 23-1737
Single Disc Front Caliper Assembly for 1974-77 FX features Clover Leaf Style 11.5” Brake Rotors for 1974-77.
stock type construction in black or chrome with piston installed. VT No. Type Finish Brand
Caliper units include zinc plated brackets and hardware. Fits 23-0302 Drilled Zinc Dura
11.5” brake disc on stock 35mm forks. 23-0303 Plain Zinc Dura
VT No. Finish 23-0317 Drilled Stainless Steel Russell
23-1730 Black 23-9042 Drilled Stainless Steel, Polished Russell
23-1737 Chrome 23-0358 Drilled Stainless Steel, Polished Dura
23-0636 Drilled Stainless Steel Dura
Caliper Piston and Seal

Caliper Seal Kits contain seal and dust boot for year listed.
VT No. OEM Front 23-0609
23-0606 44277-74 1974-77 FX
44278-74 Single Disc
23-2278 23-0607 44151-77 1979-83 XL
44153-77 FX-FXE Dual Disc
23-0608 44133-72 1972-Early 80 FL-FLH
Pistons Only, less seals, pistons are sold each.
44127-72A
VT No. OEM Front
23-0609 44007-80L 1980-84 FLH
23-1722 44109-72A 1972-Early 80 FL-FLH
44133-72
23-1725 44118-80 Late 1980-84 FL-FLH
23-0610 43945-79 1979-83 FLT
23-1723 44275-74 1974-77 FX, 1974-76 XL
44947-79 23-0608
23-2278 44157-77 1978-82 FX
VT No. OEM Rear
23-1721 43946-79 1980-82 FLT Front
23-0608 44133-72 1973-Early 80 All FL-FX
1980-1987 FLT Rear
44127-72A
VT No. OEM Rear
14-0923 44127-72A O-Ring only for above
23-1724 44129-73 1973-Early 80 FX-FL
23-0609 44007-80 Late 1980-84 All FL-FX
23-1725 44118-80 Late 1980-84 FX-FL
44133-72
23-1721* 43946-79 1980-86 FLT
23-0610 43945-79 1980-85 FLT
*Note: 1980-85 FLT have Dual Piston Caliper.
43947-79 Dual Piston Caliper
589
Replica Steel Brake Rotor 23-0312
V-Twin MfgTM Brake Rotors feature fine finish ground surface. Available with or without
holes in steel unless construction is noted as stainless. Exactly interchangeable with stock
rotors. Order bolt set separately.
23-0313 23-0309 23-0298
Drilled Plain OEM Dia. Bolt Kit Fits

FRONT
23-0304 23-0305 41813-79 10” 8738-10 1972-84 FLH
Cast or Wire 1973 only FX
23-0309 23-0310 41806-72B 10” 8738-10 1972-84 FLH, 1973 only FX
Cast or Wire with built in offset
23-0311 23-0312 44137-77A 10” 8758-10 1977-83 All FX Cast or Wire Wheel
Cast or Wire 1982-83 FXR Cast or Wire Wheel,
23/8” Inner Diameter Center Hole
23-0298 23-0299 44137-77A 10” 8831-10 FXWG 1980-83 Dual Disc Wire Wheel
Wire with 2” Inner Diameter Center Hole. Requires 2 Bolt Sets.
23-0370 — 44210-79 10” 8792-5 1979-83 FLT
23-0371 — 44210-79 10” 8792-5 As Above Stainless
REAR
23-0304 23-0305 41791-79 10” 8738-10 1973-80 All FL
1978-80 All FX’s Cast or Wire
23-0309 23-0310 41806-72B 10” 8738-10 1973-78 All Big Twin with built in offset
23-0307 23-0308 41791-79 11.5” 8791-10 1981-92 FXST-FXR Cast or Wire
23-0297 23-0313 40909-81A 12” 8791-10 1981-84 FLH Cast or Wire .390” thick.
23-0297 23-0313 40939-79A 12” 8792-5 1979-85 FLT
Brake Rotor Spacers provide offset when required, with ⁷⁄₁₆”

bolt holes. Each spacer measures 2¹⁄₁₆” inner diameter with
4⁵⁄₁₆” outside diameter For 1980-99.
23-0320* ¹⁄₁₆” Steel
19-0128 ³⁄₁₆” Steel
19-0452 ³⁄₁₆” Billet
19-0413 ¹⁄₄” Steel 19-0414
19-0414 ⁵⁄₁₆” Steel
*Note: Use when installing flat brake rotor on 1973-75 Big
Twin.
Polished 10” Brake Rotors.
Note: VT No. 23-0848 has chrome center. All brake rotors
have 2” inner diameter center hole.
VT No. Fits Style 44-0528 44-0511 44-0554
23-0847 Rear, Left 1973-80 FL-FX, Center hole is 2” Brake Rotor Bolt Spacers will adapt 1973-up FX-FL rear
23-0848 Rear, Left 1973-80 FL-FX, Center hole is 1.98” hubs to accept brake rotors for front fork use, VT No. 44-0528
23-0854 Front, Right 1973-84 FL fits dual disc type 1980-83 FXWG.
23-0849 Rear, Right VT No. Outside Diameter Inner Diameter
44-0528 ³⁄₈” ⁵⁄₁₆”
44-0511 ⁷⁄₁₆” ³⁄₈”
44-0554 ⁷⁄₁₆” ⁵⁄₁₆”
Al Williams comment in 1989, Al was a master

importer and our contact in Taiwan.
590
Drilled Stainless Rotors feature rustless finish for appearance and long service life, in Russell or Dura Rotor brand. Available
in standard or polished finish. Russell High Performance and Dura stainless steel brake rotors are compatible with all disc pads
including sintered metal and OEM.
23-0336
23-0340 23-0342 23-0358

Dura Rotor Russell OEM Dia. Bolt Kit Fits
FRONT
CLASSIC
23-0340 23-0336 23-9043 23-0315 41813-79 10” 8738-10 Wire 1972-84 FLH, 1973 only FX
or Cast or Wire Wheel
41807-74 8758-10 Cast 2" Inner Diameter Center Hole
23-0358 23-0636 23-9042 23-0317 41807-74 11.5” 8759-5 C/W 1974-77 FX Cast or Wheel
23-0342 23-0335 23-9046 23-0316 44137-77A 10” 8758-10 Cast or Wire 1977-83 All FX Cast or Wire Wheel, 2
3/8 Inner Diameter Center Hole
23-0340 23-0336 23-9043 23-0315 41813-79 10” 8794-10 Wire 1980-83 FXWG Dual Disc Wire Wheel.
44137-79 Requires 2 Bolt Sets. 2” Inner Diameter
23-0336 23-0439 23-0341
Dura Rotor Russell OEM Dia. Bolt Kit Fits

REAR
23-0340 23-0336 23-9043 23-0315 41813-79 8738-10
10” 1973-80 All FL
Cast or Wire 1978-80 All FX’s Cast or Wire
23-0439 41806-72B 10” 8738-10 1972-80 Big Twin Rear, Wire with
built in offset
23-0341 23-0333 23-9044 23-0318 41791-79 11.5” 8791-10 1981-92 FXST-FXR Cast or Wire
Cast or Wire
23-0687
23-0388 23-0583
11¹⁄₂” "Rear Brake Rotor
VT No. Item Fits Finish/Note
23-0687 18 Spoke 1984-up FXST Polished Stainless
23-0388 Razor 1979-99 XL Polished Stainless Note: Features stainless construction polished to high gloss. Order
1981-84 FX VT No. 8791-10 tapered screw set separately.
23-0583 Floating 1981-84 FX, Order bolt set separately
1984-94 FXR
591
Brake Disc Pad Set
C
A
F
E
D Brake Pad
Assortment.
B VT No.
23-0000
Brake Disc Pads are available in Duro or SBS brand. Duro, Duro Disc Kevlar for excellent stopping on all types of disc brake rotors. Duro
Rotor replacement pads are a soft organic compound designed to be compatible to all types of brake rotor. SBS brand is available in Sintered,
Ceramic or Carbon Tech compounds. Sintered Metal Pads provides maximum stopping power but can never be used in calipers that were
originally equipped with non-sintered pads. Works best with stainless steel brake rotors. Ceramic Pads are designed for general purpose use on
carbon steel brake rotor and can be used on calipers originally equipped with sintered metal brake pads. Carbon Tech Pads designed for use in
all stock or aftermarket calipers. Works well with stainless steel or cast iron rotors. Veloprene is relatively soft compound compared to ceramic or
metallic but heat resistant and less abrasive to rotors, including polished stainless types.
Fits OEM Duro Duro Duro Duro Duro SBS SBS SBS Photo
Soft Ceramic Semi Veloprene Sintered Sintered Ceramic Carbon #
Metallic Tech
1973-77 FL, FX 44131-73 23-0513 23-0913 23-0644 23-0621 23-0955 — 23-1761 23-1775 A
1973-81 FL, FX 44005-78 23-0507 23-0913 23-0644 23-0621 23-0955 — 23-1761 23-1775 A
(Except FLT)
1980-85 FLT 43957-80 23-0508 23-0918 — 23-0628 — — 23-1765 — B
1982-86 FXR, 44209-82 23-0511 23-0912 23-0641 23-0619 — — 23-1764 23-1776 C
FXST
1972-77 FL-FLH 44131-73 23-0513 23-0913 23-0644 23-0621 23-0955 — 23-1763 23-1775 A
1978-85 FL-FLH 44005-78 23-0507 23-0913 23-0644 23-0621 — — 23-1763 23-1775 A
(Except FLT)
1974-77 FX 44281-74 23-0514 23-0915 23-0645 23-0623 — 23-1767** 23-1786 — D
1978-83 FX 44098-77 23-0509* 23-0911 23-0646* 23-0624* — — 23-1760* 23-1783* E
1980-83 FLT 43395-80 23-0510 23-0999 23-0640 23-0618 — — — 23-9166 F
*Note: Set of Four
**Note: Dura Rotor Brand
Brake Rotor Bolt Chrome Rear Brake Disc Bolts.

See listing for applications.
# Thread
A E A ⁷⁄₁₆ - 14 x 1³⁄₄
E E B ³⁄₈ - 16 x 1¹⁄₂
B J C ⁷⁄₁₆ - 14 x 1¹⁄₄
G
D ⁵⁄₁₆ - 18 x 1
C E ⁵⁄₁₆ - 18 x 1
H F ¹⁄₄ - 20 x ⁵⁄₈
D G ⁵⁄₁₆ - 18 x 1¹⁄₄
H ³⁄₈ - 16 x1³⁄₈
I ³⁄₈ - 16 x1
J ³⁄₈ - 16 x1
Chrome Front Brake Rotor Bolts. Chrome Rear Brake Rotor Bolts.
Wheel Type Rotor Year VT No. # Wheel Type Year VT No. #
FX-FXWG-FXST-FXDWG
FX-FLH
Spoke Dual 1980-83 8831-10* D
Cast 1979-91 9632-5 J
Spoke/Cast Dual 1978-82 8758-10 E
Cast Single 1974-80 9600-5 G Spoke-Cast 1973-80 8738-10 H
Spoke Single 1974-80 8759-5 F Spoke-Cast 1973-80 8739-10 I
FLH Spoke-Cast 1979-92 8791-10 B
Spoke/Cast Single 1973-84 8738-10 H Spoke-Cast 1981-84 8791-10 B
Spoke/Cast Single 1973-84 8739-10 I FXST-FLST-FXR
FLT Cast 1979-91 37-9236 J
Cast Dual 1982-85 8847-5 A Cast 1979-91 9632-5 J
Cast Dual 1980-81 8792-5 C FLT
*Note: 2 kits required. Cast 1980-81 8792-5 C
Cast 1982-85 8847-5 A
592
23-9204
1949-71 Glide Brake Kit
23-9222 Glide Front Brake Backing Plate Kits consist of all
hardware including brake shoes, springs, backing plate,
drum, axle sleeve, nuts, cam with lever and mount stud.
Available for left side 1949-69 and right side 1969-71.
Chrome kit includes chrome drum and chrome backing
plate. Black kit includes black drum and polished backing
plate.
VT No. Year Type Side
23-9204 1949-66 Chrome Kit Left
23-9218 1949-66 Black Kit Left
23-9254 1967-68 Black Kit Left
23-9222 1969-71 Chrome Kit Right
23-9223 1969-71 Black Kit Right
Glide Part
CLASSIC
44-0302
23-2212 12-0537
23-2213
23-0515
Drum Parts for 1949-72 Glide fit left unless noted as right. 23-0450 As Above .025 Oversize
VT No. OEM # Item 24-0127 44448-48 L Pivot Stud
37-0520 9963 A Cable Clip with (M) locating washer
37-8776 9980 B Clip, Bar, Black 24-0128 44454-48 M Locating Washer
13-0201 41835-57 C 1949-68 Shoe Springs 24-0146 44490-48 N Left Cam Lever Assembly includes
13-0203 41835-57 C 1948-68 Shoe Springs, Black Kit 45175-49 N Clevis
13-0146 41835-69 C 1969-71 Shoe Springs, Parkerized Kit 45216-49 N Clamp
37-8675 43530-35A D Lug Bolts, Parkerized Kit 44525-49 N Clevis Pin
23-0440 D Lug Bolts, Chrome 24-0158 44490-69A N Cam Lever Assembly
44-0301 43882-48 E 1948-66 Axle Sleeve 45175-69 N 1969-72 Right Side
44-0459 43882-48 1948-66, Undersize Sleeve 23-1759 44499-48 O Brake Cam Lever Stud
44-0302 43882-67 F 1967-71 Axle Sleeve 23-0873 26-0526 45002-65A Q 1965-72 Lever Assembly
12-0537 43886-30 G Axle Sleeve Nut 26-0525 45002-65 Q As Above, Chrome
23-2212 44111-48 H 1948-66 Drum Chrome 8819-4 45031-41 R 1941-64 Pivot Screw, Cadmium
23-9922 44111-48 H As Above, Black 8819-4T As Above Zinc finish
23-2213 44111-67 H 1967-71 Drum Chrome 26-0507 45031-41 S 1965-72 Pivot Pin, 10 pack
23-2225 44111-67 H As Above, Black 26-0506 45033-49 T 1941-64 Bushing, Lever, 5 pack
23-0081 Front Finned Drum, Black 26-0505 45036-68 U Pin and Bushings, 10 pack
23-2223 44141-50 I 1949-66 Side Plate Polished, left 45039-68 For 1965-72 Lever
23-2224 44141-50C I 1949-66 Side Plate Chrome, left 36-2385 45060-54 V Cable and Housing 60”
23-2233 44141-50B I 1967-68 Side Plate Polished, left 31-0193 45092-66 W Cable Guide
23-9231 44125-69 I 1969-71 Side Plate, Chrome, right 8818-3 45159-50 X Adjusting Screw
23-9230 44125-69 I 1969-71 Side Plate, Polished, right 24-0142* 45202-50 Y 1949-51 and 1969-91 Brake Cable Tube
23-0873 44125-69 1969-71 Black Backing Plate, right and Nut, Chrome
23-1002 1969-71 Black Backing Plate Kit, right 24-0644 45202-50 Y Brake Cable Tube Only, Cadmium
23-0515 44401-49A J 1949-72 Set of Shoes, Complete 24-0143 45200-60 Y 1960-68 Cable Tube and Nut, Chrome
23-0390 As Above .025 Oversize 24-0645 45200-60 Y As Above, Cadmium
23-0505 44432-54 K Set of Linings and Rivets 24-0131 45207-49 Z Cable Tube Seat
*Note: Includes adjuster screw (X).
24-0127 24-0128 Pivot Stud Kit for front brake shoes on 1949-71 FLH and 1958-71 Servi-Car. Kit includes 44448-48 stud
and 44454-48 locating washer, which is serrated for positive lock on brake plate.
VT No. Item
24-0127 Kit
24-0128 Washer, 5 pack
593
Brake Cable Component
24-0141 24-0142
24-1375
36-2385
24-0142 24-0143
Glide Cable and Fitting Kit features parts pictured to install
brake cable on 1949-71 glide forks. Handle, cable, adjuster,
tube and fitting are included.
VT No. Item Finish Years
24-0095 24-0141 Complete Kit (Polished Lever) Chrome 1965-71
36-0415 Complete Kit Chrome 1950-64
Front Brake Cable Components. 36-0416 Complete Kit Cadmium 1950-64
VT No. Model/Item Finish 24-0142 Tube and Adjuster Only Chrome 1950-64
8818-3 Adjuster Only Cadmium 1950-71
24-0142 1949-71 FLH Adjuster Tube Kit Chrome
9741-2 Adjuster Only Chrome 1950-71
24-0644 1949-71 FLH Brake Cable Tube Only Cadmium 36-0419 Adjuster Only Chrome 1950-71
8818-3 FL-XL Adjuster only Cadmium 36-0420 Adjuster Only Zinc 1950-71
9741-2 FL-XL Adjuster only Chrome 36-2385 Cable Only 1950-71
24-0143 1960-67 FLH Crossover Tube Chrome 36-2565 Cable Only 1950-71
Left Side Brake 1949 Only
24-0645 1960-67 FLH Crossover Tube Cadmium 24-1375 Kit 1949
Left Side Brake 36-0892 Adjuster Only Zinc 1949
36-0893 Clamp
36-2385 1948-71 FL, 1952-72 K-XL, 24-1405 Tube Zinc 1949
60” Brake Cable cut to length 26-0953 Handle 1949
24-0095 1952-72 K-XL Cable Tube only Chrome 24-0205 24-0208 24-0209
24-0646 1952-72 K-XL Cable Tube only Cadmium
1965-72 Glide Cable/Handle
Assemblies.
VT No. Finish Cross Over Brake Tube Kits allow the use of left side brake
36-0576 Polish drum with 1949-68 footshifter models with a right hand brake
handle assembly. Kits include handle, cable, adjuster and cross
36-0577 Chrome
over tube.
36-0577 VT No. Finish Years
24-0204 Polish/Cadmium 1950-64
24-0205 Chrome 1950-64
24-0208 Polished 1965-68
24-0209 Chrome 1965-68
Damper Knob Kit 24-0202
24-0254
24-9963 24-1060
FLH Glide Steering Damper Hardware is for 1949-59 FL with Steering Damper Assembly Unit for 1960-84 FL includes all
drilled and tapped fork stem. pieces shown, including alloy adjusting knob. Order 24-9963
VT No. # Item 24-1461 chrome handlebar clamp cover to complete installation.
24-0753 Kit (A-B-D-G), Chrome
VT No. OEM Item
24-1461 Kit, Black
24-0202 46700-60 Kit Complete
24-0254 A Chrome Adjusting Knob Kit
with spring and spider washer 24-0201 46746-52 Knob Only
24-0314 Kit, Black 24-9963 Chrome Riser Cover
24-0207 Damper Knob with Cover 24-1060 58589-60 Polish
24-0120 B Crenelated stem nut (Cadmium) 13-0551 46751-48 Spring
24-0113 C Chrome Seat Nut with Dust Guard 24-0115 Set Friction Set
24-0115 D Friction Disc Set, 5 piece Set (2)
15-0697 Friction Washer only
24-0175 Plate with Hole, each
24-0174 Plate with Pin, each 24-0314
24-0168
24-0176 Plate with Tab, each 24-0753
24-0278 E Cone Cover Nut Steering Damper is a machined alloy universal, multi-posi-
24-0117 F Dust Shield Set tion, and adjustable damper. It can be secured between the
Upper and Lower frame and most forks. Fork tube and frame clamps are sold
37-9097 G Frame Anchor Pin, each separately. VT No. 24-0168
24-1038 Black Cover
594
1973-84 FLH Glide
FLH Style Fork
24-0520
Assemblies are
available as single
disc model 1972-84
type, which accepts
large banana caliper
to accept a 10” brake
disc. They include
chrome slider covers,
and chrome triple
trees that accept alu-
minum cowlings and a lower tree that includes a padlock tab.
Also included axle and nut, neck bearings, top nut, crown nut,
chrome tapered aluminum sliders with stock length tubes and
all 1977-up type internals installed. Lower sliders and tube
assembly with internals also available in pairs. Note: When
using a 1972 wheel order axle 44-0228 separately.
CLASSIC
VT No. Item Slider
24-0520 Kit Polished
24-0795 Kit Chrome
24-9943 Kit Custom Forks include 24-0829 black trees
which have a solid mount top. Trees with
4 3/4” center to center riser mount holes.
Accepts
24-2525 24-9904 top tee cover and tins
24-1240 Kit Chrome Leg/Tree Assembly
24-0519 Leg Assy Right and Left with Chrome Lower Sliders
24-0087 Polished Leg Set
*Note: V-Twin fork assembly is shipped complete with axle,
nut, spacer, top nut, bearing, cone nut and dust cover. Sliders
and tubes are assembled.
Adjustable Fork Assembly

Adjustable Fork Assemblies. FLH include 24-0797 24-0004
black adjustable rake triple tree set, polished 24-1055
sliders with 1977-up type internals installed,
stainless slider covers, axle and nut, fork
bearings, and cone nut. VT No. 24-2525 and
24-0790 accepts 23-2219 caliper. 24-0550
accepts left side brake component kit VT No.
23-9218. Units accept VT No. 28-0221 riser 24-0852
bushing sets and VT No. 24-9910 top tree cover
which place riser stems 3.5” center to center. 24-1069
24-0817
VT No. Type Year
24-0790 Black Adjustable Fork Tree Kit is available for 1949-76 FLH,
24-0550 Left 1949-66
1977-84 FLH, 1980-86 FXWG 41mm fork legs. Showa type
24-1865 Left 1967-71
is 1977-up. Kits feature swivel type plugs which are included.
24-1866 Right 1967-71 Lower tree has two positions for changing rake and fork lock tab.
24-2525 With Chrome Sliders 1972-84 Kits use VT No. 28-0221 rubber bushing kit and VT No. 24-9910
24-0790 Polished 1972-84 top tree cover.
24-9957
VT No. Fits
Adjustable Fork Tube Plugs. 24-0799 1949-76 FLH Complete Set, Black
VT No. Year Finish 24-0797 1977-84 FLH 80-86 FXWG Complete, Black
24-9957 1950-76 Zinc 24-0004 As Above without Tabs
24-0828 24-0828 1977-84 Zinc 24-1055 Partial Kit
24-1828 1977-84 Chrome 24-5001 Partial Kit
24-0817 Top Tree Only 1973-up
24-0852 Lower Tree only with Stem without steering damper hole
Adjustable Position Tab Set replaces 45710-58 on 24-0852A As Above with Stem with steering damper hole
all adjustable forks 1950-up. VT No. 24-0124 24-1069 Lower Cross Bar without Slider Cover Tabs
24-1320 Lower Cross Bar
24-0928 Lower Tree only with Stem with damper
Fork Stem Lock Tab for 1948-84 FLH-FXWG. 24-0124 45710-50 Adjustable Position Tabs
Replace broken, bent or missing tabs on stock 24-9957 45777-50 Early Top Plugs 1949-76, pair
24-0828 45777-77 Late Top Plugs 77-84 Showa type, pair.
lower triple trees, to be welded on. 37-9170 Top Tee Bolts with Lock Tabs, Kit
VT No. 51-0103 17-0936 45752-50 Lock Tabs
24-0197 Top Nut Kit
37-1545 Pivot Bolt 595
Glide Drum Brake Fork
1949-59 Units
feature early style
solid mount trees.
24-0789
DRUM
Glide Fork Assemblies feature black lower triple tree without lock tab and
accept a left or right side drum brake assembly with chrome or polished slider.
The 1960-71 Style has a black top tree with 3” center to center spacing which
24-0880 will accept rubber bushing kit
VT No. 28-0221. VT No. 25-2134 riser clamp fits two piece bars. VT No.
25-2132 Riser Kit fits one piece bars.
Both VT No.’s 25-2134 and 25-2132 riser kits allow the use of 24-0250 handle-
bar clamp cover on aluminum cowl. Both forks accept VT No. 24-0251 alumi-
num cowl set or 3 piece chrome VT No.’s 24-9913 or 24-9909 stainless panel
set, not included. Includes slider covers VT No. 24-0190 in chrome. Both have
polished aluminum lower sliders with late 1977-up type internals installed in
41mm stock length hard chrome fork tubes. Axle nut, neck bearing, top crown
nut and dust covers included.
Cooling Ring
clamps to brake
Complete Fork Assembly
drum on 1949-72
VT No. Year Brake Side Slider
Big Twins.
24-0789 1949-59 Left Polish
VT No. 24-9982
24-0790 1949-57 Left Chrome
24-0755 1949-59 Left Chrome
24-0756 1960-66 Left Polish
23-0081 23-0083 Cast Drum with fins.
24-0757 1960-66 Left Chrome
Fits 1949-66.
24-0866 1967-68 Left Polish
VT No. Finish
24-0880 1969-71 Right Polish
23-0081 Black
Leg Assembly Only
23-0083 Chrome
24-0791 1949-68 Left Polish
24-0754 1949-68 Left Chrome
24-0845 1969-71 Right Polish
Fork Installation Kits for 1949-66 FLH.
24-0846 1969-71 Right Chrome
VT No. 24-0777
Hardware
Glide Axle Leg Caps are cast for 1949-77 FLH Weld On Tabs of cast alloy are used to restore
type. They replace 45836-48. FLH Glide legs to accept fenders, they must be
VT No. Finish welded on to stock or turned down legs. Sold as
24-0327 24-0327 Zinc four piece set. VT No. 24-0152
24-0337 Chrome Chrome Fork Slider Bottom Cap Stud and Nut
Lower Leg Drain Allen Plug replaces 45830-48 on Kit includes locknuts and studs.
1948-76 FLH lower legs. VT No. Year Model
VT No. Finish 8813-4 1949-77 FLH Wideglide
37-8777 Zinc 8826-6 1973-up Showa and Kayaba
9909-2 Chrome
Big Twin Glide Lower Leg Cap fits 1977-99.
37-0062 Stainless Steel
VT No. OEM Finish
Chrome Fork Slider Axle Cap Right Side is alloy mate- 24-0328 45832-77 Polish
rial with natural finish and fits models with 35 and 39mm 24-0336 45832-77 Chrome
596 fork tubes. VT No. 24-0507
41mm 10” Dual Disc Fork Assembly 41mm Glide Fork
Glide Fork Assembly
with chrome sliders 24-9974 Assemblies include
accepts left side drum Fork Only forged chrome replica
brake. Assembly fea- 24-2011 triple trees and hard
tures black triple trees Kit chrome tubes on stock
without lock tab and 3” length forks, chrome
center to center spac- tubes on overstock
ing which will accept length and polished or
rubber bushing kit. chrome lower legs with
VT No. 24-0867 all internals installed
less hardware. Stock
overall length is 31”.
FXWG Style Dual Disc Fork/Wheel and Caliper

Assemblies to fit 1948-99 Big Twin FL-FX-FXWG feature
polished or chromed lower sliders without reflector boss, hard
chrome fork tubes and internals installed. Includes chrome
CLASSIC
trees with 1” diameter stem and frame lock tab, neck bear-
ings, axle spacer and top nut. Stock length is 31” overall. Kit
also includes 21” all chrome assembled wheel with bearings,
drilled 10” steel brake discs with chrome screws, and choice
of black or chrome dual disc calipers complete with pads. VT
No. 24-9947 has smooth lower legs.
VT No. Item Caliper Sliders
24-2000 Kit Chrome Polished
Fork Assembly Only
49mm Fork Assembly includes chrome upper and lower 24-0779 Fork Assembly Polished
trees with stock tubes and chrome sliders. Fits 1971-99 FX. 24-9947 Fork Assembly Polished
Fork Installation Kit fits 1973-84 FL, 1980-83 FXWG.
VT No. 24-1319
VT No. 24-0776
The V-TwinTM Fork Assembly is shipped complete with axle, axle nut, spacer, top nut, bearings, cone nut, dust cover, triple trees, fork tubes and sliders. Fork tubes
and sliders are fully assembled with internals. Final assembly of the remaining components is done by the dealer. Every leg assembly is shipped dry. We recommend
use of the appropriate fork oil such as Type B. The amount of fork oil to add varies by model. A FX will need about 6 oz per leg, a FL will need about 8.5 oz per leg and
a FXWG needs about 10 oz per leg. Due to oil cling, a dry fork leg needs about 1 oz more to fill than a drained leg would require.
Bare Fork Assembly

FXWG Dual Disc Fork Assembly
Front Wheel Speedometer Drive Kit
will allow use of 2:1 ratio speedometer.
Kit includes axle, speedometer drive
and adapter flange.
VT No. 36-0547
Fork Installation Kit includes two

bearings, dust covers, top nut axle
24-1532 24-1525 24-1501 and related hardware. Fits 1980-83
FXWG with dual disc.
VT No. 24-0776
24-0776 24-0774
Bare Fork Assembly includes stock leg assembly with hard
chrome tubes on stock length forks and chrome tubes on
overstock length and polished or chrome lower legs with
all internals installed, with chrome triple tree set, less hard-
ware. Stock overall length is 31”.
Fork Installation Kit includes two bearings, dust covers, top
(A) FXWG, Dual 10” (B) FXST, Single 11.5” (C) FXST, Dual, 11.5”
nut, axle and related hardware.
Polish Chrome Polish Chrome Polish Chrome VT No. Type Year Model
Stock 24-1500 24-1525 — 24-1532 24-1501 24-1546 24-0776 2 Disc 1980-83 FXWG
2” 24-1503 24-1526 24-1509 24-1533 24-1515 24-1540 24-0774 1 Disc 1984-99 FXST
24-0833 1 Disc 1986-99 FLST
4” 24-1504 24-1527 24-1510 24-1534 24-1516 24-1541 24-0772 2 Disc 1984-99 FLT
6” 24-1505 24-1528 — 24-1535 24-1517 24-1542 24-1158 2 Disc 2000-07 FLT
8” — — 24-1512 24-1537 24-1518 24-1543 24-0773 2 Disc 1986-99 FLST
10” — — — — 24-1519 24-1544
12” — — 24-1514 24-1539 24-1520 24-1545
597
35 mm Fork Kit 35mm FXR 35mm
35 mm Fork Tube and Slider
Assembly
24-1322 Triple Tree Set
includes a polished 24-8567
aluminum cast top tree
and a black steel lower
tree. Fits 1982-87.
VT No. 24-1322
Fork Tube and Slider Assembly available in right and left

pairs, completely assembled and dual disc. Units have hard
chrome fork tubes, and either polished or chrome lower sliders,
with springs and all internal components installed.
VT No. OEM OEM Fits Slider
24-0826 24-9969 45900-80 45901-80 1977-83 FX Chrome
24-0802 24-0589 As Above 1977-83 FX Polished
Top Triple Tree for FX with 33.4 or 35 mm tubes. 24-8567* As Above Chrome
VT No. OEM Year Finish *Note: Includes black lower tree, polished top tree and axle kit.
24-0801 45739-62B 1971-72 Cast
24-0802 45738-73 1973-84 Cast
24-0803 45738-73 1973-84 Polished Chrome Lower Slider Set Only, fits 1977-
24-0826 45736-78B 1973-84 Chrome 83 dual disc 35mm forks.
VT No. 24-0541
24-0805
Chrome 35mm Forged

Aluminum Fork Brace
adds rigidity to forks by
clamping to fork seal area
of lower leg. Fits FX-FXR
Lower Tree Applications.
with 35mm forks 1973-84.
VT No. OEM Fits Tube Size (mm)
VT No. 24-0323
24-0804 Black 1971-72 FX 33.4
24-0805 Black 1973-83 FX 35
24-0827 Chrome 1973-83 FX 35 42-0290
24-1160 Stem Only 1” bearings tapered inner diameter
Allen Lower Stem Pinch Bolts.

VT No. Type Fits Finish 42-0308
Hex 37-8834 Hex 1973-86 FX Zinc
37-9220 Allen 1973-86 FX Chrome Lower Fork Stem Covers are for FXR-FXD 1957-85 with 35mm
forks. VT No. 42-0290 can be installed without disassembling
1973-83 Narrow Glide Axle Cap. Fits FX models forks. VT No. 42-0308 replaces 45750-70 in one piece style.
with 35 and 39 mm fork tubes. VT No. Type
VT No. Finish Fits 42-0308 One Piece
24-0505 Alloy Left 42-0290 Three Piece
24-0504 Chrome Left 8757-8 Allen Screws for Above
33.4 and 35 mm Fork Plug

E-Z Fill Fork Tube 35mm Top Plugs Chrome Domed Top Bolt fits 35 mm.
feature small oil fill cap built in to fork tube VT No. OEM Fits
top plug which will allow fork oil change/fill 7622-1 45993-73 1973-85 FX
without removing top fork cap. Sold as a 37-8988 As Above Pair
pair. Fit 1973-85.
VT No. 24-0862 37-8988
Fork Tube Spring Retainer Chrome Top Fork Tube Plug

and Pin Wrench Kit includes fits 1952-71 33.4 mm tubes.
two retainers for 1952-72 Replaces 45756-59. Sold each.
Sportster and pin wrench for VT No. 7621-1
installation and removal of
retainers.
VT No. 7700-3
598
Attention!!
tion per model. It can be difficult to identify the front end assemblies because
they may not always be original equipment. Before installing, compare old and
Fork Tube
new tubes. Be sure the stock top plugs fit into the new fork tubes. To avoid Fork Tubes are precision machined with ground finish for fit
scratching the chrome, we suggest that the tubes be lightly rubbed with oil and quality. Available in chrome or hard chrome as stock. Sold
before installing into fork legs. Be absolutely sure you have the right tubes
before you install them. No fork tubes can be accepted for return that are in pairs. 24-0400
scratched or damaged due to improper installation or handling.
41mm
FL-FLH Fork Tubes
1949-Early 77 FL for 41mm forks.
VT No. Item Finish
24-0400 Stock 20”, replaces 45950-48 Chrome
24-0023 Stock 20”, replaces 45950-48 Hard Chrome
24-0024 As above machined steel Plain Steel
33.4mm 24-0401 2” over stock Chrome
1954-72 XL and 1971-72 FX 24-0402 4” over stock Chrome
24-0012 Stock 22³⁄₄” replaces 45953-71, Hard Chrome 24-0403 6” over stock Hard Chrome
35mm
1975-83 XLH-XLCH-XLCR, 1983 XLX-XLS and
CLASSIC
24-0408
1976-83 FX-FXEF, Showa for 35mm forks. Late 1977-84 FL-FLH, 1980-83 FLT-FLHT for 41mm forks.
24-0013 Stock 23¹⁄₄”, replaces 45407-75 Hard Chrome
24-0406 Stock 20⁷⁄₈”, replaces 45825-77A
24-0440 As Above, Chrome
24-0025 Stock 20⁷⁄₈”, replaces 45825-77A, Hard Chrome
24-0425 2” over stock, replaces 45644-77, Chrome
24-1351 2” over stock, replaces 45644-77, Hard Chrome
24-0026 As Above, Hard Chrome
24-0059 6” over stock, Hard Chrome
1979-82 XLS and 1977-83 FXS-FXB-FXSB-FXR-FXRS mod-
els, Showa for 35mm forks. 24-0032
24-0425 Stock 25¹⁄₄” replaces 45644-77, Chrome
24-1351 Stock 25¹⁄₄” replaces 45644-77, Hard Chrome
24-0427 4” over stock, Chrome 24-0999
1973-74 XL and 1973-74 FX-FXE, Kayaba for 35mm forks.
24-1073 Stock 23¹⁄₂”, Chrome with internals FL 1949-76 Leg Assembly includes all internals.
24-0015 Stock 23¹⁄₂”, replaces 45977-73, Hard Chrome VT No. Finish
24-0420 Stock 23¹⁄₂”, replaces 45977-73, Chrome 24-0032 Hard Chrome
24-0421 2” over stock, Chrome 24-0999 Raw
Note: Fork tubes that have been installed into triple trees are
not returnable as the installation mars the chrome finish.
41mm Fork Tube and Slider Assembly

24-0763 24-0087
24-0516
24-9917
Fork Tube and Slider Assembly is available in right and left

pairs, and is completely assembled. Units have hard chrome
fork tubes, and either polished or chrome lower sliders, with
24-0519 springs and all internal components installed.
24-0783
VT No. Type Fits Slider
24-9917 Dual Disc 1980-83 FXWG Polished
24-0516 Dual Disc 1980-83 FXWG Chrome
24-0763 Dual Disc 1980-83 FXWG Smooth Legs Polished
24-1341 Dual Disc 1980-83 FXWG Chrome
24-0519 Single Disc 1973-84 FLH Chrome
24-0783 Single 1973-84 FLH Polished
Lower Slider Set Only
24-0087 Single 1973-84 FLH Polished
24-1341 24-1089 Drum 1936-71 FLH Chrome
599
Fork Damper Tube Glide Front Fork Damper Set
is for both sides for 1949-77 Big
Twin. VT No. 24-0136
24-0446
24-0470
24-0454
Fork Damper Tube Kit includes damper tubes with rings,
screws and washers, lower stops, slider seal washers and
retaining rings for both sides.
VT No. Fork Type Fits MM
24-0136 Wide Glide 1949-76 FLH 41
Replica Glide Bushing
24-0447 Showa 1977-84 FLH 41
Set for 1949-76 Big Twin
24-0445 Showa 1980-83 FXWG 41
includes two long and two
24-0454 Steel Leg 1971-72 FX 33.4
short bushings.
24-0457 Kayaba 1973-76 FX 35
VT No. 24-0132
24-0446 Showa 1976-83 FX 35
Fork Damper Tubes are sold in pairs without
hardware.
VT No. OEM Fits
41mm
24-0133 46100-48 1949-76 FLH
24-0820 45418-80 1980-83 FXWG
24-0147 45831-77 1977-84 FLH Front Fork Damper Parts for 1949-76 FL Glide forks. VT No.
35mm 24-0032 leg set includes tubes with all internal parts installed.
24-0096 45409-75 1975-83 FX, Showa VT No. # OEM Item
24-0675 45412-75 1975-86 Nylon Ring 24-0327 A 45836-48 Leg Cap
24-0678 24-0133 B 46100-48 Damper tube only, pair
15-0218 C 46111-48 Gasket
Fork Internal 15-0219
15-0220
46125-48 Upper Gasket
45850-48 Felt Washer
24-0145 24-0129 D 46121-48 Lower Damper Bushing, pair
33.4 mm Fork Bushing Set. Fits 1952-72 12-0920 E 46172-48 Retaining Rings,10 pack
FX, 4 piece. Replaces 45818-52 13-9156 F 46161-49 Damper Valve Spring, 10 pack
VT No. 24-0145 24-0907 G 46051-49A Fork Spring, pair
12-0707 I 45826-49 Damper Shim
Damper Tube Screw. 8813-4 J/K 7725 Studs and Nuts
VT No. OEM Type/Model 45840-48
24-0188 45995-73 Kayaba, 1973-86 24-0032 Leg Assembly, pair
24-0787 45405-75A Screw pair with washer for Showa
24-0786 Showa Screw only, 5 pack
24-0328 45832-77 Leg Cap for Showa forks
Fork Drain Plug
24-0010 9758-2 24-0011
1973-76 Kayoba Fork Internals, sold in pairs. 9907-4 9910-4
VT No. # OEM Item
24-0189 B 45978-73 Tube Piston Fork Drain Screws are supplied with washers, sold in pairs.
12-0945 C 45979-73 Piston Snap Ring VT No. OEM Use
24-0219 D 45985-73 Top Spring Collar 9907-4 46201-52 1952-72 XL-K
12-0988 C 45932-73 Upper Snap Ring 6218W Chrome
9908-4 As Above Cadmium
Fork Internal Kit includes 9909-2 45830-48 1948-Early 77 Chrome
springs, damper parts and 9910-4 45790-80 1973-up Showa Fork Lower Legs
plugs for FLH. 45986-73
VT No. Years 24-0010 45790-80 1976-up Showa Fork Lower Legs
24-0743 1949-76 9758-2 45858-77 1977-up FLH, 1980-up FXWG
24-0011 45858-77 1977-up FLH, 1980-up FXWG
24-0258 Lower Damper Tube Stops, sold in pairs. Drain Screw Washers are available in a 10 pack.
VT No. OEM Fits VT No. OEM Years Use Material
24-0129 46121-48 1949-76 FLH 14-0959 6218W 1952-72 Early XL Copper
24-0459 45918-73 1973-77 FX Kayaba 14-0019 45986-73 1973-75 Kayaba Fiber
24-0094 45402-75 1976-83 FX Showa 14-0020 45403-75 1976-up Showa Fiber
24-0258 45834-77 1977-83 FL-FXWG
Lower Damper Tube Springs. Damper Tube Washers are sold in 10 pack.
VT No. OEM Fits VT No. OEM Model
13-9210 46062-71 1971-72 FX, pair 14-0017 45992-73 1973-74 XL Kayaba
13-1945 43855-77 1977-up FL-FXWG-FXST, pair Fiber 1973-76 FX
13-9160 45382-83 1983-86 FXR-FX, 10 pack 14-0018 45406-75 1975-up XL Showa
Copper 1976-up FX
600
Progressive Suspension Fork Lowering
Kit comes with Progressive rate fork springs
and spacers. Each kit can be installed at
Fork Spring
two different levels to lower fork 1” or 2”. Fits Fork Tube Spring Sets feature
1984-up FXST-FLST,1993-up FXDWG, 1980- high tensile strength wire construc-
up FLH-FLT, 1978-86 FL-FXWG. tion with ground ends. Sold in pairs
VT No. 24-1561 for OEM replacement per the fac-
35mm Progressive Suspension Fork tory number. For more fork spring
Springs feature high quality and performance applications check factory parts
replacement fork springs. Eliminate front book.
end sag, reduce nose dive under braking, VT No. Year Model
improve cornering stability, increase ride 33.4mm
comfort and allow forks to utilize full travel. Sold in pairs. Fit 24-0900 1971-72 FX-XLH
1983-87 FXRT, 1982-87 FXR-FXRS, 1985-86 FXRD, 1973-86 35mm
FX-FXE-FXS-FXSB. VT No. 24-2040 24-0901 1973-77 FX
Fork Spring Lowering Kits. Installation 24-0904 1976-83 FX-FXE
requires minor disassembly to lower the front 24-0903 1977-83 FXS-FXS-80-FXB
forks 1¹⁄₄” or 2” depending on the spacer used. 24-0906 1982-83 FXR
24-0159 Kit includes springs, spacers and hardware. 41mm
CLASSIC
Easily converts back to stock by reinstalling 24-0907 1949-77 FL-FLH
stock fork springs. 24-0908 1977-84 FLH, 1980-83 FLT
24-0159 40 1980-83 FXWG 24-0902 1980-83 FXWG
24-0161 24-0161 35 1975-82 FX
Fork Boot
“Gaiter” Fork Boots are 24-0104 24-0105
flexible type for 41mm forks
or 39mm forks. Rubber boots
are 230 mm long, black. Sold
in pairs.
28-0439 VT No. Size
24-0098
28-0439 41mm
28-0440 39mm
28-0900 28-0902 28-0903
24-0106
28-0905 28-0901
24-9049
28-0904 Chrome Wiper Boot Covers are die-cast to fit over the stock
Black Rubber Fork Boots are designed for a better fit and rubber fork wiper boot.
improved sealing and wiping action. Sold in pairs. VT No. Type Year MM
VT No. Year Model MM 24-0104 Kayaba 1973-75 FX 35
28-0900 1971-72 FX 33 24-0105 Showa 1976-83 FX 35
28-0902 1973-77 Kayaba 24-0106 Wide Glide 1949-77 FL-FLH 41
FX-FXE-FXS-FXFS 35 24-0098 Wide Glide 1980-83 FXWG, 41
28-0903 1975-87 Showa FX-FXE-FXS-FXFS-FXR 1984-90 FXST
28-0905 As Above White 35 24-9049 Wide Glide 1980-up ST 41
28-0901 1949-E77 Wide Glide 41
28-0904 1984-up FXST 41 24-9992
1980-83 FXWG
24-9993
Two Piece Chrome Fork Boot Cover Sets install over stock
rubber fork boot by the unique interlocking springs supplied
with the kit to securely hold boot covers in place.
VT No. MM Year Model
24-9992 35 Pre1987 FX-FXR
24-9993 41 1980-up FXWG-FXST-FXDWG
601
Fork Seal 14-0704 GB Deluxe Fork Seal Rebuilding
Kits include all pieces illustrated
as appropriate for each applica-
14-0938 V-Twin Deluxe Seal Kits include tion.
seals, gaskets, snap rings, wash-
ers and o-rings. James kits include
seals and o-rings only. VT No. Fits Size
14-0702 1973-74 Kayaba 35 mm
14-0703 1975-84 Showa 35 mm
14-0706 1977-84 FLH 41 mm
14-0014 1949-76 FLH 41 mm
Leak Proof Fork Seals feature a veloprene
coating to reduce drag and carry a manufac-
James VT No. MM Year Models turer’s lifetime guarantee. Sold in pairs.
14-0036 14-0014 41 1948-76 FLH VT No. Size Fits
14-0037 14-0938 41 1977-84 FLH-FLT-FXWG 14-0250 35 mm 1973-76 Kayaba FX’s
— 14-0043 33.4 1952-70 XL-XLH, Gasket only 14-0251 35 mm 1975-87 FX, Showa
14-0039 14-0940 33.4 1971-72 FX 14-0252 41 mm 1977-up FL-FLT-FXWG
14-0040 14-0941 35 1973-77 FX, Kayaba
14-0041 14-0942 35 1976-83 FX-FXR
35 1975-84 FX Showa
14-0014 V-TwinTM Deluxe Glide Fork
Seal Kit fits 1949-76 and
includes all the necessary
seals and gaskets plus felt Fork Seal Sets are molded with factory part number. Sold in
retainer, washer and circlips. pairs.
VT No. Item VT No. OEM Years Type MM
14-0014 Kit 14-0010 45975-71 1971-72 FX 33.4
24-0611 Rings 14-0013 45927-73 1973-76 FX, Kayaba 35
14-0135 Seals Only, 5 pack 14-0011 45400-75 1976-82 FX-FXR Showa 35
14-0012 45843-77 1977-83 FLH-FXWG 41
Fork Seal Kit replaces 1980-84 FLT
45849-49. Complete seal 1980-84 FXWG
kit for 1949-76 FL-FLH and GB Upper Fork Seal Kit is used to update
includes both upper and lower 1949-77 FL/FLH to later style fork seal.
seal and gaskets. The kit contains seals and spacer washer.
VT No. 14-0015 Its new style seal replaces original type
narrow seal, felt and top washer.
VT No. 14-0046
Fork Seal Retaining Ring.
VT No. OEM Year Model
A-Slider Seal Washers are zinc plated. 24-0611 45856-48 1949-76 FL-FLH
VT No. OEM Year/Model 24-0612 45842-77 1977-up FL-FXWG
24-0612
24-0617 45854-48 1949-76 FL-FLH 24-0641 45931-73 1973-76 FX-XL
24-0615 45844-77 1977-up FL, 1980-up FXWG, 24-0613 45401-75 1975-80 FX-XLH
24-0642 45928-73 1973-76 FX-XL
24-0091 45911-80 1980-83 XL, 1982-83 FX
Fork Brace Chrome Billet

Fork Brace has
a unique three-
24-0768 piece design
24-0841 allows which easy installation on 41 mm fork assem-
blies. Clamps to fork leg. Fits 1949-84 FL and 1984-
2005 FXST-FLST. VT No. 24-0768
24-0841
Installed 24-9984
Tweek Bar Fork Brace is a two piece design which clamps

Chrome Fork Brace is a four piece design for easy installation directly to fork tube.
on 41mm or 39 mm forks. VT No. Size Fits Finish
VT No. Size Fits 24-9984 41 mm 1949-84 FLH, Polish
24-0841 39mm 1985-05 FXR, FXD 1980-05 FXWG-FXST
24-1039 39mm Custom 24-0768 41 mm Three Piece Chrome
24-1041 41mm Custom
602
24-0140 24-0599
41 mm Fork Plug
24-0625
A
24-0184 24-0186
Glide Fork Plug Kit includes fork tube plugs and matching
top filler cap plugs, for FL-FLH 1949-84. 8233-1 8872-1
VT No. Fits A B
24-0140 1949-84
24-0625 1977-up Showa, FL-FXWG-FXST
24-0599 1977-up Showa (Tapered)
24-0144 24-0326 8716-1
9912-2
7620-1 7620-1T
8226-1 8716-1 Fork Tube Top Caps are stock style and vented when
CLASSIC
required. Sold each unless noted as pair.
VT No. OEM Finish Fits
7620-1 A 45754-49 Chrome 1949-77 FLH
7620-1T 45754-49 Chrome 1949-77 FLH
Inner Fork Tube Plugs are for 1949-up Big Twin glide model 24-0184 A 45754-49 Chrome 1949-77 FLH, Pair
forks. 8872-1 B 45754-60 Zinc 1960-77 FLH
VT No. OEM Year Finish U/M 9911-1 B Flat Top Chrome 1960-77 FL
24-0144 45776-49 1949-Early 77 Chrome Pair 24-0186 45419-80 Chrome 1977-up FL
24-0326 45776-49 1949-Early 77 Zinc Pair 45418-80
8716-1 45838-77 1977-up Chrome Each 9912-2 B Flat Top Chrome 1978-up FL
8716-1T 1977-84 Chrome Each 8233-1 A 45419-80 Chrome 1977-84 FL
8226-1 45776-49 1949-Early 77 Chrome Each 8233-1T A 45419-80 Chrome 1977-84 FL
Note: VT No. 8872-1 and 9912-2 are flat top like stock
24-0828
24-9957
24-0154
Taper-Top Socket Fork fit 41mm Glide .
VT No. Years/Model
24-0154 1948-76 FLH
24-0981 1977-up Allen
24-0750
Fork Plug Sets. 24-1762 Chrome Fork Tube Plug with washer. Fits FL,
VT No. Year Type Finish FXWG, Softail 1978-up.
24-0750 1949-79 Fixed, Vented Zinc VT No. 2311-2
24-9957 1949-76 Adjustable, Vented Zinc Chrome Fork Tube
24-1762 1949-71 Adjustable Chrome Plugs. Sold in pairs.
24-0828 1977-up Adjustable, Non-Vented Zinc VT No. Year
24-1828 1977-up Adjustable, Non-Vented Chrome 24-1087 1950-59
Fork Baffle Kit fits FLH for 1949-77. 24-1087
Servi-car 1958-73, with all parts neces- Fork Tube Cap Washer and
sary to thread into slider tube plug as pic- Seal for Showa and Kayoba
tured for two sides. fork legs, sold as pack of 10.
VT No. 24-0130
VT No. OEM # Fits Finish
24-1401 Fork Tube Top Nut 24-0610 5710 A 80-up FXWG fits Tube Plug Zinc
and Plug Kit. Replica 9964-2 5710 A 80-up FXWG fits Tube Plug Chrome
of the distinct 1949 14-0132 45773-48 B 48-up FLH-FXWG, Cap Seal Pack of 5
style as original, fits
1949-76 FL. Includes
two chrome 1949 style
top nuts and lower
zinc tube plugs with
baffle, exact style
replica.
VT No. 24-1401
603
41 mm Glide Tree
24-0800 24-0486 24-0829 24-0345
A D C
B 24-0346
FLH Triple Trees fit Big Twin FL fork tubes 41mm 1948-84, 1960-
84 types can be fitted with aluminum cowl sets only, VT No.
24-0251. 1949-59 can be fitted with tin cowl sets, 24-9913. All Replica Forged Steel Triple Tree Kits include lower bearing
lowers accept lower slider covers. The 1948-59 style top trees pressed on, dust shield set and upper bearing with cone nut.
have ¹⁄₂” holes for post riser mounting. Kit Tree Set Year/Model Finish
VT No. OEM Finish Year Item 24-1326 24-0829 1949-59 FL Black
Tree Sets 24-1327 24-1329 1960-68 FL Black
24-0800* Fits cowl Chrome 1960-84 A and B 24-1328 24-1323 1960-84 FL Black
24-0486 Fits cowl Chrome 1960-84 A and B 24-1655 24-0486 1960-84 FL Chrome
24-0829 Fits tins Black 1948-59 C and D 24-0345 24-0800 1960-84 FLH Chrome
Lower Tree Only 24-0346 1980-86 FXWG Chrome
24-0811 45700-60 Chrome 1960-84 D
24-0444* 45700-69A Chrome 1960-84 A 24-0000 24-0825
24-0813* 45700-69A Black 1960-84 A
24-0830 45700-48A Black 1948-59 D
24-0985 45700-48A Chrome 1948-59 D
24-1070 Lock Tab Raw 1973-84
Top Tree Only
24-0003 56121-73 Chrome 1973-84 B
24-0814 56121-73 Black 1973-84 B
24-0751 56121-48 Black 1948-59 C-Solid
24-0752 56121-48 Chrome 1948-59 C-Solid
28-1949 56159-49 4 Piece 1960-72 Riser bushing
28-0221 56153-73 Set 1973-84 Riser bushing
37-8835 4729 Zinc 1948-84 Lower Pinch Bolt
*Note: Lower tree has a lock tab.
25-2102 25-2103
24-0843 24-0064
24-0007
Solid Handlebar Mount Adapter Kit eliminates the flex style
stock rubber mounts. The addition of this kit gives a solid
mount handlebar setup.
VT No. Year Finish FXWG Triple Trees accept 41mm fork tubes. Bottom tree
25-2102 1962-72 Chrome features built in rake and rounded edges. Trees use VT No.
25-2103 1973-up Chrome 28-2218 rubber bushing set and headlamp bracket VT No.
25-2223 1973-up Chrome 31-9991 which can be purchased separately. Trees fit 1980-86
25-2224 1973-up Brass FXWG, FXST.
25-2225 1973-up Black VT No. Type Years
16-0272 Fork Stem Die Tool Tree Sets
16-0051 VT No. Item 24-0000 Stock 1980-86
16-0272 Die Holder Top Tree Only
Tool 24-0007 Stock 1980-86
16-0051 Die Tool with Lower Tree Only
Holder Set 24-0825 Stock 1980-86
24-0843* Stock 1980-86
1” Fork Stem Die is round type adjustable to 24-0064 Without lock 1980-86
restore damaged or mistreated threads. Fits *Note: Includes lower bearing.
1936-84 Big Twin 1” x 24T FL-FLH Fork Stem. Chrome 1980-86 FXWG Headlight
VT No. 16-0836 Bracket mounts bottom mount headlights
on fork and also covers rough casting on
lower tree. VT No. 31-0140
31-0140
604
24-1960
Fork Panel
24-1464
24-0500
1960-84 FLH Headlamp Cowl Kit available with complete light
assembly with rim and chrome or polished housing set with 24-9913
matching top handlebar cover as pictured.
24-9912
VT No. Item 24-1755
24-0500 Chrome Kit
24-0501 Polished Kit
24-1960 Black Kit
37-0808 Screw Kit, Stainless Steel
37-0815 Screw Kit, Chrome
37-0949 Screw Kit, Replica
CLASSIC
24-1962
24-0190
24-9909
24-9258
24-1753 24-1755
24-0386
Slider Covers fit 1949-84 FLH model forks. Stock length is
65/8” overall.
VT No. Finish Fits
24-0190 Chrome Stock
24-1184 Brushed SS
24-1962 Black Stock 37-0547 24-7943
24-0386 Chrome Flame
24-9904
Fork Covers fit 1949-59 FLH triple trees.

VT No. Years Item Finish/Note
24-9988 24-9905 24-1464 1955-59 5 Piece Kit Black, 3 Rib, Hydra Glide
24-9913 1955-59 3 Piece Kit Chrome, 3 Rib, Hydra Glide
24-9909 1955-59 3 Piece Kit Stainless, 3 Rib, Hydra Glide
24-1755 1955-59 4 Piece Kit Chrome, 3 Rib, Hydra Glide
Top Triple Tree Covers are available in either a stainless
steel or chrome finish. Note: 24-9904 and 24-9988 for 1949- 24-1753 1955-59 4 Piece Kit Black, 3 Rib, Hydra Glide
59 solid mount glide risers. 24-9912* 1949 4 Piece Kit Stainless, 4 Rib
VT No. OEM Finish Type/Style 24-9258 1950-54 4 Piece Kit Stainless, 3 Rib
24-9904 45740-49 Stainless FLH, Solid 24-9902 1949-59 Left Panel Stainless, 46281-49
24-9988 45741-50 Stainless Adjustable, Solid 24-9903 1949-59 Right Panel Stainless, 46283-49
24-9905* 45741-60 Stainless 3½” center to center 24-7943 Set Right & Left Panel Set, Stainless
*Note: 3½” C/C, fit the 1960-up type Iso mount trees. 24-9923* 1950-54 Front Panel Stainless, 4 Rib Hydra Glide
Handlebar Clamp Cover replaces original type FLH 24-9924* 1949 Front Panel Stainless, 4 Rib
1960-84 Wide Glide forks. 24-9906 1955-59 Front Panel Stainless, 46273-49A
3 Rib Hydra Glide
24-9907 1955-59 Front Panel Chrome, 3 Rib, Hydra Glide
24-1085 1949-59 Screws, set of 6
24-0250 56590-60 1960-79 Chrome Smooth
37-0547 1949-59 — Mount Kit
24-0281 56590-60 1960-79 Polished Smooth
*Note: 1949-53 type feature straight ribs.
24-1862 Black 1960-79 Black
Control Cable Guide replaces 56600-49 on 1949-
24-9963* 56589-60 1960-79 Chrome with Damper Hole
60 FL’s to prevent cables and wiring from abrasion
24-0330 56590-79 1980-84 Chrome Smooth
on top triple tree and has black plastic construction.
37-8701 Chrome 1960-84 Screws for Above
VT No. 28-0222
37-8701T Chrome 1960-84 Screws for Above
*Note: Uses 24-0202 damper kit.
605
Neck Kit with stop 24-0296
Chrome Internal Fork
Stop Kit includes pieces for
complete installation on Big
Smooth Neck
Cup Set Twins, and custom frames
features built which accept press in neck
in stop and cups. Kit allows choice of
includes races turning radius of 35 or 45
and bearings. degrees. For 1936-87 Big
VT No. Twin in 35° and 45° config-
24-0874 uration.
VT No. 24-0296
Chrome Mega-Neck Cup Set fea-
tures 1” inner diameter bearing set
with large outside diameter on the
outer race which provides 1.68 times
the radial capacity and 1.57 times the
axial capacity of a conventional bear-
ing. Kit includes chrome cups, bear-
ings, races and two dust shields.
VT No. 24-0300
Top Nut
Chrome Glide Acorn Nut is 1” x Chrome Fork Stem Nut Cover
24T with Shoulder for alignment to fit over stock stem nut and
in top tee, fits 1948-up FL-FLH. held in place by set screws.
VT No. Item Cover is one piece. Fits 1980-up
37-0442 With 39mm fork.
24-1459 37-0443
7802-1 With VT No. 24-1336
24-1459 With
37-0443 Without 37-8137 Chrome Flat Top Stem Nut replaces 45718-71
24-0185 24-0226 on 1978-86 FXE-FX-FXR.
37-8138
VT No. Item
37-8137 Nut, 7/8 x 24 threads per inch
9963-1 Washer
9963-1T Washer
37-0988 Washer
Stock Type Stem Nut
VT No. Year Type Finish 17-0924
24-0185 1948-up Glide Zinc
37-8138 1960-up Glide Chrome
24-1456 1960-up Glide Zinc
VT No. 24-0663 VT No. 24-0662 VT No. 24-0113
17-0924 Lock Tab
37-0597 Chrome Nut FL Cone Cover Nut features cover with built in nut. Replaces
17-0924 Zinc Lock tab, 10 pack 48330-48.
Stem Nut and Lockwasher Kit VT No. Item Years
includes lock washer and nut. 24-0113 Hex Type 1960-84
24-0662 Replica Type 1949-84
24-0663 Cone Type 1960-84
VT No. Finish Item Lower Cone Nut for Big Twins.
8808-2 Black Kit VT No. OEM Years
37-8138 Chrome Kit 24-0622 48330-48A 1949-59
24-0197 Zinc Kit 24-0622 24-0278 48330-48B 1960-84
24-0226 Nut with Stainless Steel Cover
1949-84 Stem Nut and Lower Cone Nut 1949-60 Top Nut features crenelated design for use
Set. Thin profile of cone nut allows use of with steering damper plates. Replaces 45718-49.
outer covers and cowls. VT No. 24-0120
VT No. 24-0317
Wide Glide Top Nut Kit fits 1948-84 FL,
Cone Nut Spanner is used for 1971-2010 FX. Includes top nut, cover set and
removing and installing crenulated lock nut, and tapered bearing set.
nuts and dust covers with internal VT No. 24-1460
thread. Fits 1948-59 FL.
VT No. 16-1344
606
Big Twin Neck Kit
24-1282 12-0334 12-0348 12-0823
24-0253 Fork Stem Bearings and Races.

Order separately as noted.
VT No. Item Type U/M
24-0122
24-1282 Kit All 7 Piece
12-0334 1949-59 Big Twin Bearing Each
24-0121 24-0119 24-1751 12-0365 1949-59 Big Twin Race Each
24-0118 1960-up Big Twin Bearings Pair
VT No. Brand Year Item U/M
12-0384 Peer 1960-up Big Twin Bearings Pair
12-0823 VT 1960-up Big Twin Bearing Each
12-0335 Timken 1960-up Big Twin Bearing Each
Big Twin Neck Cup Assembly available as a complete kit which 12-0348 Timken 1960-up Big Twin Race Each
CLASSIC
includes chrome neck cups with races installed and a chrome top 12-0383 Peer 1960-up Big Twin Race Each
nut. Available as component parts for 1948-86 Big Twins. Dust Shields.
VT No. Item VT No. Finish Fits Model
24-0122 Kit, Complete with chrome cups 24-0618 Chrome 48-up Big Twin
24-1751 Kit, Complete with zinc cups 24-0624 24-0112 Zinc Lower 48-up FX-FL
24-0253 Kit with cups 24-0624 Zinc Chrome (Low) 48-up FX-FL
24-0121 Cup Set, zinc 24-0117 Zinc Upper & Low 60-up FX-FL
24-0119 Cup Set, chrome 24-0114 Chrome Upper & Low 60-up FX-FL
24-1071 Without races, Cup Set, chrome
24-0126 24-0118 24-0102
1960-84 Chrome Cup Set 24-0103

for use with early fork tins.
Sealed Timken Neck Bearings feature built in rubber seal
24-0126 Cup Set
where bearing contacts top of race. Available as a complete kit
24-0118 Bearing, pair
with chrome cups that includes dust shields or as bearings only
24-0112 Lower Cover
that can be used to update models where races are pressed
into frame neck.
VT No. Item
24-0103 Chrome Cups with races and Sealed Bearing Kit
1949-88 Big Twin
24-0102 Two Sealed Bearings; 1989-up FXST, 1989-94 FXR
Chrome Smoothie Neck Cup Kit includes races, 1” bearings 1980-up FLT, 1992-17 FXD
and dust cover set for Big Twins. Hexagon Neck Cup Kit
VT No. Item includes 1” neck bearing set.
24-0322 Kit VT No. 24-0305
24-1156 Top Cover
Steering Stem Bearing Kit
24-0112 Lower Cover
VT No. 24-1750
Sealed Bearing Set for 1” stems.
VT No. 24-0089
Raked Kit
24-0274 “Raked” Fork Neck Cup
24-0283 Kit replaces existing remov-
able cups to provide 3° rake
when installed. Kit includes
cup set, bearing set and
dust covers with instructions.
Fits 1949-87 Big Twin.
VT No. Finish
Note: Rake neck kits are for 24-0274 Stainless
show applications only and 24-0283 Chrome
require longer fork tubes to
be installed.
607
Glide Riser
Glide Type Risers are original tapered type,
through bolt design, chrome steel. Bolts not
25-0021 included.*Note: Feature rubber Iso-inserts,
25-2175
25-2175 and ⁵⁄₁₆” acorn nuts.
VT No. Rise
25-2171 3” 25-2220
25-2129 4”, Threaded
25-2173 5”
25-2130* 5”
25-2176* 3”
25-2220 3”
25-2250 3”
Replica 1949-59 Big Twin Riser Kit includes two chrome post Black Handlebar Clamp fits 1960-78 FL.
risers with zinc plated caps, chrome riser link with four studs VT No. Item
and acorn nuts, two rubber bushings, two screws and two flex 25-2134 Clamp
32-1725 Lighter
lock nuts as pictured.
VT No. Item 24-0250 24-1862 24-0330 24-0281
25-2175 Kit
25-2137 Zinc Riser Top Set
25-2226 Chrome Riser Top Set
25-2227 3” Riser Set (np) Handlebar Clamp Cover replaces original type FLH 1960-84
25-0021 3” Riser Set Wide Glide Forks. 24-1470
25-2117 3” Riser Set VT No. Year Type
37-8820 Bolt Only 24-0250 1960-79 Chrome Smooth
37-9149 Flex Nuts 24-1862 Black As Above
2680-4 Bolt Kit with nuts 24-0281 1960-79 Polished Smooth
24-9963* 1960-79 Chrome with Damper Hole
Cigarette Lighter for Glide models fits 24-0330 1980-84 Chrome Smooth
1949-59 FL stock riser top cap studs. 24-1470 1960-84 W/lighter
VT No. 32-1725 37-8701 1960-84 Chrome Screws for Above
Chrome Riser Link fits 37-8701T 1960-84 Chrome Screws for Above
49-0417 *Note: Uses 24-0202 damper kit.
1949-60 FL and has 43/4”
center to center mounting
holes. Bushing
28-1949
VT No. Use A-B
49-0417 Top Clamp
37-8810 Four Studs and Four Acorns, Set 28-1950
C
26-2121
25-2137
25-2117 28-2223
Chrome Early Style Glide Risers feature rubber Handlebar Riser Bushing Kit includes two bushings and
bushings for use on 1949-59 models of FLH. two washers for 1949-72 FL. The 1960-72 FL requires VT No.
Order top riser link separately. 26-2121 for solid type mounting.
VT No. Item VT No. # Note Years Item
25-2117 Riser and Top 28-1949 A-B Kit 1949-59 Four pieces
Chrome Set 28-1950 B Pair 1949-59 Two washers
25-0819 Riser Body Only 28-2223 A .007 1949-59 Oversize
25-2137 Replica Early Style Zinc Top 26-2121 C Set (4) 1960-72 Bushings Steel
37-8820 Bolts, pair with nuts
25-2137 Tops, Zinc, pair
25-2212 Tops, Chrome, pair 25-2102 28-2103
28-1949 Rubber Washer, pair
Kit, 4 pc Rubber Bushing, pair Solid Handlebar Mount Adapter Kit eliminates the flex style
28-1950 Rubber Washer only, pair stock rubber mounts. The addition of this kit gives a solid
37-8810 28-2223 .007 Oversize Rubber Bushings, pair mount handlebar setup.
37-8810 Acorn Nuts with Stud Set VT No. Fits
Control Cable Guide replaces 56600-49 on 1949- 25-2102 1962-84 FL, 1979-1984 FLT
60 FL’s to prevent cables and wiring from abrasion 25-2103 1973-84 FX, 1982-94 FXR
on top triple tree. Guide has black plastic construc-
tion. VT No. 28-0222
608
Chrome Duo-Glide Bar Set is a chrome
stock type with switches and cables
installed. Fits 1960-64 FL.
25-0662
Handlebar
VT No. Item
25-0662 Bar Set
25-0933 Bar Assembly 25-0933 25-0697
25-0941 Bar Set (Throttle Only)
Two Piece Bars. Original Buckhorn
type, knurled to fit stock riser block on
25-0663 1960-78 FL, 1” diameter on both ends 25-0661
enables snap throttle to be used.
VT No. 25-0663
49-0153 Installed on 25-0600
25-0601
49-0153
CLASSIC
Replica Chrome Cross Bar Kit includes fluted tube and two 25-0600
stainless clamps for FLH models.
VT No. Item
49-0153 Cross Bar
31-0530 Clamp Set Only
37-1969 Bolt Set
Grips
25-2180
28-0119 28-0184
Glide Bar Set uses stock internal components for years listed.
28-0118
Available in one piece with reinforced center or two piece type.
Some hand fitting internals required.
VT No. Note Type Fits
25-0697 Bar Only 1949-53
25-0601 A Assembly 1949-53
25-0661 Bar Only 1954-59
25-0758 Bar Black 1954-59
25-0600 B Assembly 1954-59
25-0602 C Assembly 1954-59
25-2180 Bar Only 1965-73 FL-FLH
25-0491 Bar Only 1949-65, right push or pull
A Complete with Push Throttle/Spark/Switches
28-0185 28-0186 28-0187 B Complete with Push Throttle/Push Spark/Switches
C Complete with Pull Throttle/Push Spark/Switches
1962-72 Rib Style Grips.
VT No. Color
28-0118 Black 28-0184 Red 28-0186 Yellow
28-0119 White 28-0185 Blue 28-0187 Green
28-0110 28-0121
36-0497 36-0499 36-2574
36-2551
Order Internals Separately Listed Below
VT No. Item Year/Fits
28-0159 36-0497 Throttle Spark 1949-53 Two side, push
36-0499 Throttle Spark 1954-64 Two side, push
Replica Waffle Grips are replacement for 56212-53 on 1949- 36-2551 Throttle Only 1954-73 One side, push
61, in 1¹⁄₈” size or 1974-up late type 1¹⁄₈” size. Available in 36-2574 Throttle Only 1954-73 One side, pull
pairs. Order chrome plugs separately.
36-0073 Cable Wire Set
VT No. Color Year Inner Diameter Grip Hole Plugs for 1953-61
28-0159 Black without plug hole 1949-72 1¹⁄₈” are zinc plated with groove,
28-0110 Black with plug hole 1949-72 1¹⁄₈” pair. VT No. 28-0625
28-0111 White with plug hole 1949-72 1¹⁄₈”
28-1985 Black with plug hole 1974-up 1¹⁄₈”, 1” left grip Chrome Hole Plugs for 1960-84 snap in as
28-0134 Black with chrome plugs 1953-72 1¹⁄₈” replacements.
28-0121 White with plug hole 1974-84 1¹⁄₈” VT No. 28-0618
609
Glide Fender 50-0117
Replica Fender for

1949-84 FLH. 50-0124
50-0124 Raw
50-1144 Chrome
50-0124 50-1144
Replica Glide Raw Finish Front Fender 50-1081 50-0140

replaces 59000-48A with early type brack-
ets riveted on. Fits 1949-57. FLH Front Fenders fit 1949-84 Wide Glide type forks for 16”
VT No. 50-0742 wheels. All fenders
VT No. Type Note listed fit 41mm
50-0124 Replica Raw Without trim holes wide style
50-0137 Replica Raw With trim holes glide fork
50-0117 Replica Without brackets assemblies.
50-1081 Replica 1979-84 with fender tip indent
and trim holes
50-0140 Replica Less Brackets, raw
Front Fender Mount Kit attaches fender
50-0127 50-0128 to original style assembly.
VT No. Model Year Finish
37-0830 FXWG 1980-83 Chrome
50-1086 50-1086 FLH 1949-84 Zinc
2292-8 FLH 1951-78 Chrome
17-0941 FL Locktabs 1975-84 Zinc
50-0115 37-0895 FLT 1980-up Zinc
31-3967 31-0539
Glide Type Fenders are finished as noted, include chrome or

raw braces riveted on. Fit 19” and 21” tires only for 1949-84
FL. 50-1148
VT No. Fender Braces
50-0127 Plain Chrome Glide Fender Brackets replace braces on 1948-84 FLH fend-
50-0128 Chrome Chrome ers for repair or mounting on custom 7” wide fenders.
50-0115 Raw Springer Type Chrome VT No. Year
31-3967 1958-84
Glide Fender Bracket, 31-0539 1949-57
zinc finish. 50-1148 1949-up, zinc
VT No. 50-1148 50-1530
50-1541
48-1981
Police Fender Marker Plate fits 1936-84 45” and Big Twins.
Order decal set separately.
VT No. Item
50-1530 Marker Plate
48-1981 Decal Set
50-1541 Set
610
50-0119
Front Fender for
50-0392
35 and 39mm Fork
50-0122 50-0136
50-0789 37-6370
Front Stock Type Fender in raw steel, has chrome tubular
type brackets riveted in place.
VT No. Year Type Cable Bracket
50-0392 1970-83 Assembled Left 50-0123 50-0164
50-0119 1970-83 Bobbed
50-0789 1984-91 Assembled
CLASSIC
37-6370 — Stainless Steel Rivets
25 pieces
Springer Style Fender
fits 1973-up 35 and 39 50-0889
50-0165
mm models with 19” or
21” wheels. Narrow Type Front Fenders for 35 or 39mm forks feature
VT No. 50-0116 a raw or chrome steel finish with brackets riveted on. VT No.
50-0122 fits 19” wheels on 1973-90 XLX models, 50-0164 fits
1973-up models with 21” wheels and 1991-up with 19” or 21”
wheels.
Chrome Front Fender Allen Head Screw VT No. Finish Wheel Brackets
Kits contain all the necessary screws for 50-0122 Plain 19” Chrome
mounting front fender brackets to fender and 50-0136 Plain 19” Raw
bracket to fork legs. Use on all 1973-up FX 50-0123 Chrome 19” Chrome
stock type front fenders. VT No. 37-6367 50-0164 Raw 19” Chrome
50-0165 Raw 19” Raw
Fender Rivets fit 1973-up FX-XL 50-0889 Raw 19” Raw
models, stainless, pack of 25. 50-1140 Raw 19” Raw
VT No. 37-6370
50-1055 50-1050 50-1049

50-0133 50-0195
Universal Sport Style Front Fender is rolled on edge and in
50-0915 front. The brackets are not included.
Chrome Fender Tip is stamped or smooth. Fits fender width VT No. Type
as noted. 50-0133 Chrome (drilled)
VT No. Style Width Type 50-0195 Plain
50-1055 Eagle 4” XL-XLS
50-1050 Smooth 4” XL-XLS
50-1049 Smooth 5” FX
50-0915 Eagle 5” FX
Emblem Sets feature threaded studs to attach to fender as

original accessory, but can be mounted to fenders and sad-
dlebags, sold as pair.
VT No. OEM Finish Type
38-6674 11530-46 Nickel Deluxe
38-0923 Chrome Deluxe
38-6675 91583-52 Nickel O.H.V.
38-6676 91582-50 Chrome Hydra-Glide
38-6680 59195-58 Chrome Duo-Glide
38-6555 Chrome Electra-Glide
37-8842* 7613A 10 pack Speed-Nuts
611
Spring Fork Fender 50-0894 50-0895
50-0144
50-0750
50-0760 50-0779
50-0751
Replica Front Fenders feature two piece spot welded skirt
panels and correct width braces.
*Note: 50-0895 has fender lamp holes.
VT No. Year Model
All other are without fender lamp holes.
50-0894 1936-46 Big Twin
50-0895* 1936-46 Big Twin
50-0751 1947-48 Big Twin
50-0763 1934-36 Big Twin
50-0474 Bobbed
50-0474
Front Fender Mounting Kit is used to
install stock front fenders on 1936-57
Spring Forks.
VT No. Item
9742-6 8203-6 Kit, Cadmium
9680-6 Kit, Parkerized
9742-6 Kit, Chrome
8009-2 Locks Only
Springer Front Fenders are 7½” wide for 16” or 18” wheels with 50-0734 Reinforcement Plate
riveted on braces. Fit Big Twin with outside rockers. 2980-11 Mount Tool Kit
VT No. Year 50-0734
2805-5 Hinge Pin & Rivet Kit
50-0144 1936-48 2806-5 Tool
50-0750 1936-46
50-0760 1936-48 Brace Assemblies
50-0474 Bobbed 50-0730 VT No. Size
Separate Pieces 50-0451 Narrow
50-0182 Skirt Set Only Right and Left 50-0182 50-0359 Mid
50-0779 Fender without Braces 50-0730 Wide
Stainless Fender Trim for 1939-48
Big Twin and 45”, 1940-49 Spring Universal Springer Style
fork front Includes clips. Fender for 18” , 19” , and 21”
VT No. Fits wheel. Brackets must be fabri-
50-0914 50-0914 Front cated.
50-0350 Front, Replica 4 piece VT No. 50-0780
37-8458 Clips, 25 pack
50-0883 Bobber Fender is 6” wide without
holes. Order bracket to mount to 28-0701 28-0702 Rubber Mud Flaps.
spring fork rear leg tabs. Fits 1936- Stock for front and rear
57 Spring Forks. fenders for Big Twin.
VT No. Item VT No. Color
50-0883 Fender 28-0701 Black
50-1566 Bracket 28-0702 White
50-1566
37-6368 37-6369 37-6370 Early Mud Flap replaces 59235-26 in
rubber with laminated cloth construction.
VT No. Item
28-2249 Mud Flap
Replacement Fender Rivets fit all FL front and rear fenders 28-2249 49-0425 Mount Hardware
and FX front fenders, pack of 25. 3180-18 Mount Kit (Colony)
VT No. Fits 3180-18R Mount Kit
37-6368 Big Twin Fender Brace
37-6369 Big Twin Fender Top Note: All Items Shipped with a Raw Finish may
37-6370 FX Front, 1973-up Stainless have some oxidation (rust on surface)!
612
Rigid Rear Fender
50-0143 50-0156 50-0744 50-0142
50-0880 50-0157
50-0892 50-0351 50-0280
CLASSIC
Rigid Rear Fenders. VT No. 50-0143 and 50-0141 feature relief
over skirts to accept stainless fender trim attached by clips. Fully 50-0283
assembled and riveted together with hinge. VT No. 50-0142 has
smooth skirts for 1949-57 Rigid Big Twin and VT No. 50-0744
has fender plate built in. *Note: Features two piece spot welded
skirt.
Big Twin Note: All 50-0284
VT No. Fits Items Raw Rigid Rear Fender Assembly without tail end hinge.
Fender VT No. Year
50-0143 1939-54 Shipped 50-0283 1936-48
50-0156* 1939-46 with Narrow braces with a Raw 50-0284 1949-51
50-0157* 1947-48 with Wide braces Stainless Fender Trim for Rigid rear 1939-48
50-0744 1949-51
Finish may 50-0913 Big Twin. Includes clips.
50-0142 1949-57 have some VT No.
50-0913 Rear
Fits
50-0435 1936-57 Bobbed oxidation 50-0355 Rear, Replica 4 piece
50-0880 1936-57 Bobbed 37-8458 Clips, 25 pack
50-0892 1936-57 Bobbed (rust on
50-0351 1936-45 EL, TT Short, Rigid surface)!
50-0280 1936-57, Short
50-1054 50-1053 50-0549
31-0190 31-0457 37-9204 37-1507
Fender U Clamp is used on 1936-57 Rigid models. Secures
rear fender to frame cross tube. Replaces 59800-36.
Tail VT No. Finish Note
50-1054 1939-57, Tail Only 31-0190 Chrome Order chrome carriage bolts separately
50-1053 1949-54, Tail Only 31-0457 Parkerized Order chrome carriage bolts separately
50-1199 1955-57, Tail Only No Cut Out 31-0910 Raw Order chrome carriage bolts separately
50-0549 1949-53, Rear Fender Tail End 50-1010 37-9204 Parkerized Bolt set, when using rear frame bar
50-1010 Fender Plate 37-1507 Chrome Carriage bolts
50-0348 50-0527 50-0526 Brace Sets, Riveted, 6
pieces.
VT No. Years Fits
50-0348 1936-46 5/8” Assy
9708-18 2493-6 2460-2
50-0527 1947-48 3/4” Assy
50-0526 1949-57 7/8” Assy Rigid Rear Fender VT No. Finish
Mounting Kit includes 8202-18 Cadmium
2460-2 hardware to install rear 9708-18 Chrome
50-0525 50-0557 fender on 1936-57 Big 9707-18 Parkerized
Twin. 2493-6 Parkerized
2460-2 Parkerized
Fender Stays Only Stainless Steel Strip Set is
50-0449 5/8” Wide shown installed on a Rigid
50-0525 3/4” Wide Fender.
50-0624 7/8” Wide VT No. 50-1045
2460-2 Bolt Set, Parkerized 2493-6
50-0557 Tail Bracket U
51-0069 Rear Fender Tab Set, Raw
Rear Fender Brace Bracket Bolt Kit Accent Bars for Rigid Rear Fender
3064-2 Parkerized 3064-2 VT No. 2634-12T
3205-2 Cadmium
3206-2 Chrome 613
Strut Set
All Fenders are STEEL!
Rear Fender
FRAME • FENDERS • TANKS
We suggest pre-fitting all component parts including engine and transmission 50-0900 50-0979
assemblies before painting or final assembly of a frame, fender or tank.
50-1072
50-0705
50-0702
50-1072 Installed
50-0901
50-0761
50-0884
50-0902 50-0907
50-0903 50-1080
50-0774 50-0879 Chrome Fender Strut Sets are available in smooth or stock
style with signal and mount holes. Smooth is without holes,
stock is with holes.
Smooth Stock OEM Fits
N/A 50-0900 59929-73 1973-83 FX-FXE
N/A 50-0979 As Above Less turn signal holes
50-0743 N/A 50-1072 59923-58 1958-76 FLH with 5 holes
N/A 50-0901 As Above With 7 holes
N/A 50-0902 59933-77 1977-84 FLH
Replica FLH Rear Fenders replace the original steel part. 50-0907 50-0903 59960-80 1980-85 FXWG
Taillight cut out and turn signal mounts noted. 59961-80
VT No. Application Tail Lamp Type N/A 50-1080 As Above less turn signal holes
50-0702 1958-76 FL A Flip Strut Spacers replace 59938-72 on 1972-84 FX-FXE
50-0705 1958-78 FL B Flip models, pack of 10.
50-0761 1973-78 C Flip VT No. 37-9093
50-0884 1973-78 C and D Flip
50-0774 1979-84 Replica C and D One Piece Chrome Allen Fender Strut Bolt Kits
50-0879 1979-84 FLH C One Piece include necessary allen head bolts, washers
50-0743 1979-84 Replica B One Piece and nuts for fender mounting.
Accepts A Early 1955-72 type VT No. Year/Model
Taillight B Tombstone or Beehive
Type C Late 1973-up large style 37-9048 1973-85 FX
D Turn Signal Indents 37-9049 1958-84 FL without
50-1054 50-1053 50-0703 saddlebags/luggage rack
Rear Fender End. One-half of hinge is riveted to fender end.

VT No. Year Model
50-1054 1939-46 Rigid Big Twin and 45
50-1053 1947-54 Rigid Big Twin and 45
50-1199 1955-57 Rigid Big Twin, no cutout
50-0703 1958-78 No Cut Out
50-1006 1958-78 Hinge with Pin
50-0931 1939-48 Hinge with Pin have some oxidation (rust on surface)!
37-8840 1939-78 Hinge Pin
614
All Fenders are
Rear Fender 71-84 FX-FXE-FXWG STEEL!
Stock Style Cateye Style
50-0793 50-0755
50-0701 50-1076
Slice Style
50-0756
50-0150
50-0942
50-0704 FXWG Bobbed Style Rear Fender Kits fit 1965-85 FLH,
CLASSIC
1971-84 FX-FXE models. Kits include steel fender chrome
FX-FXE Rear Fenders for 1972-84 FX models use stock struts, chrome tail lamp bracket and tail lamp. Available in
struts. *Note: Accepts tail lamp as noted. All fenders use three styles.
either 50-0900 stock or 50-0905 smooth struts. VT No. Tail Lamp Style
VT No. Type Tail Lamp 50-0793 Stock
50-0701 Flare End No 50-0755 Cateye
50-1076 Stock 1971-72 33-0300 50-0756 Slice
50-0704* Stock 1973-84 33-0301 50-0150 Fender Only
50-0942 Full, Smooth No 50-1080 Struts
50-0979
50-0900
50-0150 50-0170
Bobbed Style Rear Fenders fit stock struts. Order light
50-1080
brackets separately.
50-0903 VT No. Year Model Light Bracket
Chrome Steel Struts fit FXE-FXWG as noted. 50-0150 1980-85 FXWG 31-0160
Smooth Stock Year 50-0170 1972-84 FXE 31-0472
N/A 50-0900 1973-83
N/A 50-0979 Without Signal Hole FXR
50-0907 50-0903 1980-85 FXWG 50-1106
N/A 50-1080 Without Signal Hole 50-1064
2522-6 Mount Kit
Stock Type Rear Fender fits 1981-up FXR-FXRS models.

Replaces 59634-81A.
50-0942 VT No. Item Year
50-0471 50-0768 Fender 1981-94 FXR
Struts
Chrome Polished Fit 50-0768
50-1064 50-0286 1982-86 FXR
50-1106 50-0285 1987-94 FXR
Chrome Rear Fender
Support Mount Kit to
50-1525 50-0860 replace original hardware
Dresser Rear Fender not drilled, to be installed with modification. for FLH.
VT No. Width VT No. Year Style
50-0942 6.5” 9638-30 1958-80 Acorn
50-0471 7.5” 8879-30 8879-30 1958-80 Stock
50-0860 8.0” 2625-30 1958-80 Replica
50-1525 9.0”
615
Fender Trim 50-0991 50-0992 50-1047
50-1023 50-0958
Chrome Fender Trim Rails for FLH, 1949-84 drum and disc
Front Fender Trim Set for 1949-72 FL models includes tip, models, and rear for 1958-84 FL models.
side strips, and lower end trim. VT No. Fits Style
VT No. Years 50-0992 Front V Design
50-0958 1949-58 Kit 50-0997 50-1047 Drum only V Design
50-0997 1949-70 Lower End Trim Only 37-9108 Spacers For Above
50-1022* 1958-66 50-0991 Rear V Design
50-1023* 1967-72 37-8997 “T” Bolt Front
*Note: Include tip and side spears only. 37-0854 Front Mount Kit
50-1099 50-1058 31-1346
50-1058
50-1100
Front and Rear Bumpers feature rubber inserts as original.
VT No. Year Type
50-1100 1968-80 Front, FLH
Rear Bumpers with original cabbage cutter design grill.
50-1058 1968-84 Front Rubber insert
VT No Type
37-9108 1968-up Front Spacer, four piece
50-1099 With Grill
37-0855 1968-84 Mount Bolt Kit
50-1040 Without Grill
31-1346 1977-up Front, Bracket
50-1037
50-1037 Installed 50-1045 Stainless Steel Fender Trim
Installed Set features two 9” and two
10” strips for the top of all
7¹⁄₄” wide rigid, swing arm or
bobbed rear fenders. T-bolts
and supplied for ease of instal-
lation. Note: Template on web.
VT No. 50-1045
Front Bumper with original cutter design. Includes parts for
mounting to FLH-FLT front fenders. Fender requires drilling for 50-1084
installation. Installed
VT No. Item
37-9024 Chrome Eye Bolt Set
Sargent Stripe Set
includes six piec- 50-1084 50-1531 50-1533
es in stainless with
attachment clips. Drill
template included for
1949-57 rigid fend-
ers.
50-1033 VT No. 50-1033 50-1534
Installed 50-1552
50-1532
Chrome Front Fender Rails fit FL style front fenders.

Chrome Rigid Rear Includes mount stanchions and template.
Fender Stripe Set features VT No. Type
die cast construction with 50-1084 Rail Trim Kit, Custom
stud mountings to fit 1949- 50-1531 1949-up, Short
57. Note: Instructions and 50-1533 1949-up Wide Glide Forks, Candy Cane
templates on web. 50-1532 Dual Rail, 9” Long
VT No. 50-1052 50-1552 Lower Fender Rail
50-1534 Loop
616
50-0950 50-0952 50-1004
Fender Tip and Trim
50-0953 50-0954
50-1005 50-1029
50-0951
50-1030 37-8784
1936-58 Fender Tips. Order the side rails separately.
50-1032 50-1152 50-1153 VT No. Type Year Finish
50-0953 Front 1949-58 Stainless
50-0955 Front 1935-46 Chrome
50-0956 Rear 1935-46 Chrome
50-0954 Rails 1949-56 Stainless 50-0958
50-0958 Kit 1949-56 Stainess
50-1031 50-0343 50-0951 Rails 1957-66 Stainless
CLASSIC
50-0531 Rails 1957-up Chrome
37-8784 Set Four T-Bolts and Four Nuts
50-0344 50-0091 50-0092
Installed Installed
50-0346 50-0347
50-0957
Die Cast Chrome Fender Tips fit 1958-84 FLH. Order the side rails 50-0091 50-0092
separately.
Front Rear Years
50-0950 50-0952 1959-66
50-1004 50-1005 1967-72
50-1029 50-1030 1978-79
50-1031 50-1032 1980-84
50-1152 50-1153 1980-84
50-0048
50-1191 1980-84
Painted Inlay
50-0343 50-0344 1200 cc
50-0346 50-0347 80”
Stainless Side Rails 1936-48 Fender Tips.
50-0957 1967-up Chrome Brass Type
50-0047 50-0091 Rear
50-0048 50-0092 Front
50-0999 50-0916
50-1003 50-1009
50-0955 50-0956
50-1132 Installed 50-1133 50-1133 Installed
Chrome Fender Tips in stamped steel. For 1934-57 front or

50-1132 rear fenders.
VT No. Style
50-1015 Lower Fender Trim includes
50-0999 Smooth
screws. Fits 1949-84 FLH.
50-0916 Eagle
VT No. Type
50-0955 Front
50-1003 Smooth
50-0956 Rear
50-1009* Ribbed
50-1132 Flame Chrome Fender Tip Set. Tips attach by
50-1133 Smooth 2 studs on each tip. Installation requires
50-1015* Smooth drilling of holes in fenders. Order side
37-1508 Screw Kit rails separately. VT No. 50-0504
*Note: Screws not included. Rear Fender Wiring Loops. Set
Wing Fender Tip Ornament for of 3.
front fenders. VT No. 50-0339
VT No. 48-1434 Fender Trim Clip Set attaches stainless side
straps to FLH dresser front fenders.
VT No. 37-1343
617
Kickstand
Chrome Smooth
Kickstand Bracket is
one-piece forged design
with recessed mount
hardware. 27-1555
VT No. 27-0250
27-1617
Chrome Kickstand
Assembly fits 1936-85 Chrome Kickstand Assembly as shown is for 1936-85 Big
models. Kit includes late Twin-FL-FX-FXWG and for 1984-99 FXST.
style mount bracket with VT No. Year/Type
built in spring plate, lock 27-1555 1936-85 Stock
tab, spring and flat bot- 27-1617 1936-85 Extended for 2-4” Front Fork
tomed forged side stand
with mount hardware. 18 mm Outside
VT No. 27-1720 27-1511 Diameter Heavy
27-1603
27-1512 27-1513
Custom Kickstand Assembly features full forged construction

Forged Big Twin Kickstand is made of heat treated steel
with chrome smooth contour design, including recessed mount
and chrome plated. It features a flattened base as original.
screws for 1936-99 Big Twin, 4-Speed, 1984-up Softail models.
Extended types fit extended fork lengths as noted.
Stock length.
VT No. OEM Length
VT No. 27-0253
27-1511 50061-36 Stock
27-0779 27-1603 Heavy 18mm Stock
27-1512 Extended 2-4”
27-1513 Extended 4-6”
Forged Kickstand with spring fits
1936-84 Big Twin.
27-0514 VT No. Item
27-0976 Stand Kit
27-0976
27-0546 27-0546 Lock Kit
Chrome Adjustable Kickstand Lowering Wedge fits under the

Kickstand Locktab fits mount bracket to change the angle of the
1936-up Big Twin models. bracket and assembly, when using shock or
Prevents stand from hitting fork lowering kits. VT No. 31-0215
primary cover. Kickstand Bumper Pad is for use on all 1970-
VT No. Item Year 85 Big Twins with aluminum primary. Adhesive
27-0514 Tab 1936-up backed for quick installation. Sold in a 10 pack.
27-0779 Kit 1986-up FXST VT No. 28-0704
Dan Henke Hard to Find Parts

VT No. OEM Item Finish
37-1213 490 Clevis Pin Cadmium
37-1214 7748 Nut Parkerized
37-1215 7030 Lockwasher Parkerized
37-1216 6448 Washer Parkerized
37-1217 7035 Lockwasher Parkerized
37-1218 42280-35 Bracket Parkerized
37-1219 50634-14 Footboard Bolts Parkerized
37-1220 6490 Fender Parkerized
618
27-1787 27-1679
Kickstand
27-1713
27-1689 27-1708
27-0082
27-1715 27-1790
27-1732
27-0838
Replica Stock Kickstand Legs replace 50061-36 for 1936-69
CLASSIC
models.
VT No. Finish Type 27-1701
27-1787 Parkerized Replica Replica Kickstand Assembly fits 1936-57 Rigid Big Twins.
27-1679 Black Includes bracket, lock tab, spring, spring tab, leg and hard-
27-1689 Parkerized ware in stock or chrome finish.
27-1708 Chrome VT No. Item
27-1715 Chrome 27-1732 Kit, Replica
27-1790 Chrome Replica 27-1701 Kit, Black and Parkerized, Complete
27-0838 Zinc Replica 27-1713 Kit, Chrome Complete
27-0082 Kit, zinc
27-0533 27-0172 Parkerized Replica 27-0172
Kickstand and Foot Clutch Bracket Mounting Kit attaches
assembly to left side of frame for 1936-99 models.
VT No. Finish Type
9617-18 Chrome Hex
27-0129 9617-18T Chrome Hex
9618-18 Cadmium Hex
9619-18 Parkerized Hex
27-0381 9619-18T Parkerized Hex
27-0507 27-0504
27-0508 27-0506
13-0154 13-0452
27-0871
Replica Kickstand Mount Kit includes bracket, spring, clip, lock-
Chrome Big Twin Kickstand Hardware.
tab and mount hardware in parkerized finish.
VT No. Item
VT No. Item Year Finish Springs
27-0871* Kit 1936-57 Parkerized Mount Brackets
27-0508 With Spring Tab 13-0154 1936-85
27-0713 Kit 1936-57 Parkerized 13-9154 1936-85, 10 pack
27-0129 Kit 1958-84 Parkerized 1936-84
27-0507 1936-84 Big Twin 13-0452 Kickstand Spring
27-0381 Mount 1936-38 Parkerized
27-1508 Bracket 1936-57 Parkerized Spring Plates
27-0533 Bracket 1936-84 Parkerized 27-0506 1936-90
27-0598 Bracket w/o 1936-57 Parkerized Leg Stop
27-1682 Spring Clip 1936-84 Parkerized 27-0504
27-1683 Spring 1936-84 Black
13-0876 Spring 1936-84 Parkerized 27-0511 27-0805
27-1684 Lock Tab 1936-84 Parkerized
27-1273 Lock Tab 1936-84 Parkerized
*Note: Mount bracket does not have 2 holes as original.
Complete Chrome Kickstand Mounting Kit includes kickstand

mount spring leg stop and spring plate. Fits 1936-84 Big Twin.
VT No. Item
27-0511 Kit
27-0805 Kit with bolts 619
Front Engine Bar
FOR ENGINE BARS LISTED ON THIS PAGE
WARNING: ENGINE/FRAME BARS MAY PROVIDE LIMITED LEG AND COSMETIC VEHICLE
PROTECTION UNDER UNIQUE CIRCUMSTANCES (FALL OVER WHILE STOPPED, VERY
LOW SPEED SLIDE). THEY ARE NOT MADE NOR INTENDED TO PROVIDE PROTECTION
FROM BODILY INJURY IN A COLLISION WITH AN AUTOMOBILE OR ANY OTHER OBJECT.
49-0396 49-0397
51-0894
51-0900
“Atlas” Style Replica Front Engine Bar Bolt Cover will

mount to 1936-47 Big Twin front bar. U-bolt and acorn nuts
51-1043 49-0396 Raw
49-0397 Chrome
49-0534 U-Clamp
51-1337 49-0534
U Clamp Sets have a forged
design as original. Fit front
51-0900 Installed engine bar clamps.
C 37-8815 VT No. 37-8815
A Lindby Custom Highway
B Bars with footpegs fea-
1” Front Engine Bars fit on stock frames for years listed. ture 1¹⁄₈” tubing for front
Order U-Clamp separately. highway bars and 1” tub-
FL-FLH 4-Speed Models
VT No. # OEM Years Model ing for rear. Both front and
51-1337 Black 1936-38 Big Twin rear have built in O-ring
51-1323 Chrome 1936-38 Big Twin footpegs and rear high-
51-0900 A 49038-36 1936-47 Big Twin way bars will work with
A 1954-57 Straight Leg stock exhaust systems.
51-0899 A 49038-36 As Above Big Twin Black Big Twin Front
49-1314 Raw 1936-47 Bracket VT No. Year Model
51-0896 B 49038-48 1948-Early 54 Big Twin Wish Bone 50-2063 1979-84 FLH 4 Speed
51-1043 C 49038-48 1948-52 Big Twin Wish Bone 50-2064 1965-78 FLH
with flat mount
51-1044 As Above Black
51-1537 49038-48 1948-Early 54 Big Twin Wish Bone
Black
51-0609 49059-48 1948-53 Spacers
51-0894 49038-58B 1958-78 Big Twin FL-FLH
51-0901 49039-78 1958-78 Big Twin (1¹⁄₄”) Big Twin Engine Bar Mount Kits. 2477-10
FL-FLH Chrome Cadmium Parkerized Year
31-4011* 49032-74 1973-84 FX 2630-8 2631-8 — 1951-54
51-0902 49040-79 1979-84 1¹⁄₄” FL-FLH — — 2477-10 1948-54
51-0891 49016-72D 1972-84 1¹⁄₄” FX, FXE — 2495-11 — 1958-69
*Note: Allows installation of 51-0901 mounting bracket on FX models. — — 2203-8 1936-47, 1955-57
Rear Frame Bar Chrome Rear Frame Bars fit 1958-84 FL,
FLH Swing Arm 4 Speed models.
VT No. OEM Fits
51-0895 51-0889
51-0928 49137-65 1965-66 Big Twin
FL-FLH
mounts to shock stud
Rear Frame Bars 54-0409
Fit Rigid Big Twin 1936-57 51-0895 51-0932 49150-58 1958-64 Big Twin
51-0895 49153-36 Chrome FL-FLH
51-0889 49153-36 Black VT No. 51-0903 51-0903 49137-67B 1968-84 Big Twin
Big Twin Rear Frame Bar Mounting Kit fits 1936-57 Big Twin. Installed Swingarm. Use 54-0425
Order VT No. 37-9204, 59802-47, pair of upper bolt studs when Stud Spacers when
it is desired to leave fender bolted in place after removing bar. bars are not used
VT No. Item Finish 9530-13
9530-13 Bolt Kit Chrome
9531-13 Bolt Kit Cadmium
9532-13 Bolt Kit Parkerized
37-9204 Bolt Set, Upper Black
37-9176 Bolt Set, Lower Cadmium
620
Rear Frame Stand
49-0928
2744-10
49-0953 49-0918
Center Stand for 1958-84 Big Twins. Features natural finish

aluminum construction, with bushings and bolts. Replaces
49400-59A.
VT No. Item
49-0928 Stand Complete
37-9306 Bushing Only 49-0610
2744-10 Mount Kit
Chrome Knurled Knobs for attaching side 49-0602
cover or battery tops on FL models. Sold in
pairs. Fits ⁵⁄₁₆ - 18” Thread, 1⁵⁄₈ outer diame- Rear Frame Stands for Rigid Big Twin. Order stand catch
CLASSIC
37-8873 ter. VT No. 37-8873 and mounting hardware separately. VT No. 49-0602 is of
Chrome Engine Air Scoop tubular shape material.
31-1025
will force air to rear cylinder. VT No. Year Model Finish
Mounts to left side of 1966- 49-0953 1938-57 Big Twin Black
84 Big Twin Shovelhead. 49-0033 1941-57 Legs Only Raw
Brackets are included. 49-0918 1938-57 74 and 80 Chrome
VT No. Item 49-0602 1936 and 1937 Big Twin Black
42-0317 Kit 49-0610 1936-37 Big Twin Chrome
31-1025 Brackets Parkerized Front Stand Mounting Kit
3086-12 Studs Parkerized
Mounting Hardware fits all models with rear stand.

VT No. Year Finish
8840-10 1930-35 Parkerized
42-0313 42-0553
2910-6 1936 Parkerized
Chrome FLH Starter Relay Cover Kit includes hardware. 8841-10 1936-37 Parkerized
Replaces 66425-68. Use on 1965-84 FL-FLH. 8015-4 1938-57 Parkerized
VT No. Style 9616-4 1938-57 Chrome 8015-4
42-0313 Smooth 51-0479 1936-57 Tab Set
42-0553 Gold Inlay Spirit 31-0370
50-1534
Installed 31-0186 31-0480
74 and 80 Stand Catch. Replaces 49580-36.
VT No. OEM Finish Year
50-1534 31-0186 49580-36 Parkerized 1936-46
31-0480 49580-36 Chrome 1936-46
Chrome Front Fender Rail for 6" front fenders. 1936-52. 31-0370 49580-36 Black 1936-46
VT No. 50-1534 31-0853 49580-36A Parkerized 1947-57
Skid Plate
42-0101 42-0098
Steel Skid Plates replace 24490-36, 1936-99 Big Twin.

VT No Finish
42-0101 Chrome
42-0098 Stainless
42-0117 Black
42-5025 Black, Replica
42-0117 42-5025
621
Big Twin Rigid Chain Guards
27-0126
27-0111
Chrome Chain Guard with bracket fit 1936-57 Big Twins with
bracket and custom rigids.
27-1600 27-1677 VT No. 27-0111
Universal Chrome Left
Detail Side Guard is 25” long.
of 27-0100 VT No. 27-0100
27-0117 27-0117
Replica V-Twin Rear Chain Guard Mount Kits include
Chain Guards are bolt, nut, spring, washers and cotter pin
produced with perfor Big Twins and 45’s.
27-0127
manent tooling for
exact fit and shape. VT No. Finish Fits
V-Twin Replica 9746-7 Parkerized 1936-57 Big Twin
Chain Guards pass 2071-10 Chrome 1936-57 Big Twin
AMCA judging 13-9186 Black 1936-57 Stud Spring
27-0124 standards.
Rigid Chain Guards by V-Twin Mfg.TM include built in stud for
mounting to stock rigid rear fender. Order hardware separately.
VT No. Finish Year Type
49-0494 49-0492
27-1600 Black 1936-57 V-Twin
27-1677 Chrome 1936-57 V-Twin Outer Chain Enclosure Cover.
27-0126 Black 1941-57 Replica VT No. Finish
27-0127 Chrome 1941-57 Replica 49-0494 Chrome
27-0117* Black 1936-40 Replica 49-0492 Black
27-0124* Chrome 1936-40 Replica
*Note: 3 Rivet Construction
1958-84 Swingarm Chain Guards

Chrome V-Twin Replica
27-0121
1958 Style FLH Rear Chain
Guard fits 1958-84 FL.
27-0109 27-0108 VT No. 27-0121
Isomount Swingarm Chrome Chain Guard is complete with
rubber bushing and rear bracket. VT No.
VT No. Fits 28-0422
Mount Kit
27-0109* 1958-85 FX-FL-FXE for 1963-82
27-0108* 1973-84 FX-FL FLH
27-0119 FL 1958-1962 28-0422
27-0118 As above black
Bolt and Bushing Kit fits FLH chain guard 1963-82.
37-0593 Mount Kit, zinc
VT No. Item
*Note: Fits 1958-84 FL also for “the lighter” FX look.
28-0422 Chain Guard Bolt and Bushing Kit
28-0132 Rubber and Steel Bushing Set
37-0427 Steel Bushing only
28-0411 Rubber Grommet Only
Don't Forget the Best Inner Primary!
42-3654
27-0110 27-0116
Full Chain Guard includes bushing. For 1963-82 FLH style.
VT No. Finish
27-0110 Chrome Details
27-0116 Black Replica Inner Primary Covers with drain fitting installed. Oil
guard may have to be removed on some foot shift applications.
Black Raw OEM Year
42-3654 42-1212 60626-36 1936-54
622
Toolbox
50-0615 Drop
50-1535 Hinge
50-0926 50-1186 50-0341
Rigid Toolbox Kit includes a raw brack-
et and a tool box. 50-0041
VT No. Finish Type
50-0926 Chrome Oval
50-1186 Black Oval 50-0600
50-0341 Black Rectangle 50-1139
50-0041 Black Rectangle
Toolbox Mounting Kit for Big Twins includes all necessary
stock hardware to mount the tool box. Cadmium plated.
VT No. Fits 50-0601
2002-13 1955-57
2003-6 1958-Early 1962
2004-6 Late 1962-1964
Mounting Kit for 1935-54 Big Twin and 45 Toolbox includes
CLASSIC
50-0983
all necessary stock hardware to mount the stock oval tool box
as listed.
50-0602
8206-9 Cadmium Kit
9669-9 Parkerized Kit
9669-9T Parkerized Kit
37-9178 Cup Washer
Two Piece Toolbox Mount is a replacement
B A mount for stock and custom rigid frames.
Mounts box higher than one piece style 49-0996
bracket.
VT No. # Item Year

31-0525 A and B Kit 1948-54 Replica Toolboxes are for right side use and include keys,
31-0655 A and B Kit 1948-53, Replica VT No. 48-0570 is a pouch insert for oval toolboxes. Order
31-0772 B Bracket 1948-53 mount hardware separately.
31-0406 A Cross Bracket 1948-53 VT No. Type Shape
31-0579 A Cross Bracket 1948-53, Replica 50-0600 Chrome Oval
50-0926 Kit Oval
A
50-0601 Black Oval 50-1234
31-0626 50-0615 Raw Oval
B 31-0412 49-0996 Raw Oval (2 bullet holes by 9 mm Glock)
50-0602 Chrome Rectangle
50-0983 Black Rectangle
Replica Vertical Toolbox Mount for Knucklehead. 50-1139 Raw Rectangle
VT No. # Year Item 50-0947 Raw Rectangle 50-0342
31-0626 A 1936-37 Each 50-1535 Black Rectangle
31-0683 A 1938-40 Each 50-1234 Parkerized Rectangle
31-0412 B 1941-47 Cross Bracket 50-0603 Key Set
49-1258 1938-40 Pad Parkerized Keys 50-0603
49-1259 1936-37 Pad 50-0342 Lock with keys
50-0505 Lock Kit
Replica Toolbox Mounting Bracket is a one Toolbox Mounting
piece design mount that fits all Rigid frames is 50-0934
Bracket mounts
correct for 1954-57. VT No. 31-0528 kidney toolbox to
1977-84 FLH Toolbox Kit fits right 1977-84 FX on the
side,contours rear shock and bolts rear passenger peg
to rear battery tray and exhaust tube block on left side.
mount. Kit is ribbed and allows use of 31-0527
FXE or FLH exhaust.
50-0934 Kit
Spark Plug Holder 31-0527 Bracket
clamps to the rear frame 48-0570 Inner Pouch
tube on Rigid Big Twins.
Holds two spark plugs. Toolbox Wing Nuts have a zinc finish.
VT No. Finish VT No. 37-6136
42-0318 42-1537 42-0318 Chrome
42-1537 Black
623
V-Twin Replica Motorcycle Kit
V-Twin Replica Knucklehead
This machine is recreated with the original Bobber
styling of the late 1940’s, utilizing the full range of
V-Twin Replica Parts. Engine details include cast
motor case with relay and number boss, but rein-
forced at cylinder base area for added strength.
Knuckleheads are replicated from ductile cast iron
with accurately formed valve cover set and plumb-
er style manifold. Foot Shift model includes hand-
shift gate and handle for decoration only. Other
components in assembly include:
• 29° V-Twin Replica frame
• Replica Knuckle Tanks
• Chopper Solo Seat
• 16” Rear and 18” Front Wheel
• Chrome Stock Inline Spring Fork
We’ve done your homework on this one!
• V-Twin Replica Motorcycle Kits are equipped
with all the necessary parts except gas, oil
and battery electrolyte!
• All components used throughout the assembly
have been selected for each particular year of Take a closer look.
application.
• Engine is completely assembled pre-run and
Original Styling!
tested for oil pressure
Want a really different
• Transmission completely assembled look...
• Wheels, laced and trued in our facility with How about Stock?
bearings pre-set
Replica Bobber Type Finish

55-5013 55-5009 Handshift Chrome
55-5014 55-5010 Handshift Resto
55-5016 55-5011 Footshift Chrome
55-5017 55-5012 Footshift Resto
55-3637 Handshift Resto
Green Bobber Kit.

VT No. 55-1939
624
Replica Knucklehead
55-1947
55-1947
55-1947
Sold unassembled and unpainted.
CLASSIC
55-1945
55-1945
55-1945
1947 Knucklehead Replica Kit includes fully assembled

motor, transmission, wheel assemblies and fork. All parts
included except paint and assembly. Restoration finish in black
and parkerized. See web parts build list.
VT No. 55-1947
Replica 1947 Knucklehead Bike Kit. VT No. 55-0047
Replica 1947 Knucklehead Bike Kit. VT No. 55-1335
55-1945 61” Green Bobber Kit.

VT No. 55-1939
V-Twin Knucklehead Parts Dope Refer-

ence Guide for 100% V-Twin restoration
components and Linkert tips for 1936-47
Knuckleheads is volume #2.
VT No. 48-1331
Bobber Chassis Kit.

VT No. Style Knucklehead Service and Parts Manual
55-1940 Knucklehead Tourist Trophy Chassis Kit is 492 pages. Full parts service and dope
55-1936 Knuck manual includes a detailed restoration
55-1938 Knuck section that is presented by Dan Henke of
55-1945 Knuck Cairo, New York. Dan illustrates all
55-1960 Evo-Shovelhead TC-88 the overlooked items that can cost points
55-1955 Panhead during a competition when being judged.
55-1947 Knucklehead Shop book includes service, parts and
55-1938 Knucklehead dealer tips for the models and years that
55-1948 Panhead are listed.
VT No. 48-0928
625
1948 Replica Panhead
Left Side Detail Kits include all parts
includes Rocker necessary for complete
Clutch and construction!
Diamond Primary
Authentic Fork
Just Add...
• Paint Look!
• Assembly
• Gas, Oil, Electrolyte
• Rider
Accessories include original style
Spotlamps!
Our Replica is supplied with all the options included. There are
no extras. There is nothing else to buy. You can plan your con-
struction project up front and actually be able to visualize the
end result. You will not end up spending extra time and money
Industry First! searching for parts that are virtually impossible to find. In the
long run, you would spend more time and money on parts than
First Assembly done Raw you would the V-Twin kit.
• Available as a complete project kit based on an authentic V-Twin Replica
Finish in 1998! Wishbone Frame.
• Unassembled kit is available with parts necessary to complete an entire
Exemplar Panhead.
• Kits are available in either chrome, with chrome plated components and
accessories, or as a restoration style with restoration finishes of black and
parkerized components.
• Choose hand or foot shift control assemblies for desired configuration.
• Supplied with a completely assembled and test run 74” V-Twin Replica PanheadTM
engine with either aluminum or chrome detailing.
• Pre-wired dash base assembly
• Parts book and maintenance manual included
• 4-Speed early transmission is assembled into the V-TwinTM Replica 4-Speed
gear box, complete with ratchet top and chrome or restoration particulars.
• See the V-Twin Mfg.TM catalog for details on all items included in this kit.
• Replica Motorcycle Kits are sold as component parts. Manufacturer’s Statement
1955 Panhead Replica. Museum quality. of Origin (MSO) is supplied for the frame and engine.
VT No. 55-1520 • Check your state for registration, title and licensing requirements.
Handshift Handshift Footshift Footshift

Chrome Resto Chrome Resto
1948 Panhead Replica 55-5003 55-5008 55-5002 55-5007
1941 Knucklehead Bobber 55-5009 55-5010 55-5011 55-5012
1941 Knucklehead Replica 55-5013 55-5014 55-5016 55-5017
626
Replica 1959 Duo-Glide Kit
Replica Straight Leg Rigid Frame with cross tube is for chain drive mod-
els. This frame is an authentic reproduction of the 1954-1957 straight leg
frame with a stock 30° neck rake. Details include forged parts as original
neck, front and rear engine mount, side car mounts, top seat yoke, axle,
seat post and footboard tabs. Front engine mount spacer will allow installa-
tion of a Knucklehead or Flathead engine. Cross shaft may be removed for
use with hydraulic or disc brakes. Disc or drum brake tabs are available sep-
arately. Seat post bushing and mechanical brake cross tube bushing may
require reaming prior to assembly. The frame has an indent on the left lower
rear frame bar for tooling fixture. A Bill of Sale is supplied.
VT No. 51-1956
55-1959
CLASSIC
You’ll want to
take a closer
Sold unassembled
look. and unpainted.
Original styling!
Want a really dif-
ferent look ...
How about
“STOCK”?
V-Twin Mfg. Replica Swingarm Rolling Chassis Kit features

Replica FrameTM and appropriate style components for each
year as listed. Accepts a Panhead or Shovelhead engine.
VT No. Year Model
55-2525 1958-59 Panhead
55-2567 1960-65 Panhead 55-1959
55-2566 1966-72 FLH
55-2526 1973-84 FLH
55-1959 1959 Pan Replica
55-2018 Pan Retro 1959 Duo-Glide Replica Kit includes fully assembled motor,
transmission, wheel assemblies and fork. All parts included
except paint and assembly. See web parts build list.
VT No. 55-1959
Rolling Chassis Kits
1957 Panhead is an authentic style reproduction of the orig-

inal, complete with all parts to assemble a motorcycle. Parts
may be substituted as requested for each build. Kit is sold
unassembled and is not provided with a title for registration. V-Twin Mfg. Rigid Replica Rolling Chassis include Replica ForkTM, Replica FrameTM and relat-
Kit can be assembled with ordinary mechanic’s tools and ed components as appropriated for model years listed. Available in chrome or restoration (resto)
finish. Available in hand or foot shift style tanks.
includes parts book and maintenance manual. This is a com- HandShift Handshift Footshift Footshift
plete kit with foot shifter and chrome accents. Transmission Chrome Resto Chrome Resto Year/Model
— 55-1937 — — 1939 Replica Knucklehead
and 74” V-Twin replica motor are assembled and factory test- 55-2536 55-2539 55-2529 55-2522 1948 Replica Panhead
ed. Check your state for registration and title requirements. 55-2532 55-2523 — — 1941 Replica Knucklehead
55-1956 — — — 1956 Replica Panhead
Manufacturer’s Statement of Origin is supplied for the frame 55-2537 55-2546 55-2524 55-2533 1957 Replica Panhead
and engine. 55-2531 55-2527 55-1946 — 1947 Replica Knucklehead “Bull”
55-2538 55-2541 55-2528 55-2534 1949 Replica Panhead
VT No. 55-1957 627
Frame and Fork Kit
55-0000 55-0021
55-0000 55-0000
Frame and Fork Kit

VT No Frame Fork Fits
55-0000 51-1953 49-2407 1946-48 FL, 1946-48 UL
55-0001 51-1953 49-2412 1946-48 FL, 1946-48 UL
55-0002 51-1957 49-2420 1941-68 FL, 1971-99 FX
55-0003 51-1948 49-2420 1946-48 FL, 1946-48 UL
55-0004 51-1200 49-2407 1946-48 FL, 1946-48 UL
55-0005 51-1200 49-2412 1956-62 FL, 1946-48 UL
55-0006 51-1948 49-2417 1941-45 FL, 1937-45 UL
V-Twin Product Subassemblies
55-0007 51-1957 49-2417 1941-45 FL, 1937-45 UL
55-0008 51-1942 49-2909 1941-45 EL, 1941-45 FL Watch Our Video!
55-0009 51-1942 49-2900 1941-45 FL, 1941-45 EL http://www.youtube.com/user/TeddCycle
55-0010 51-1938 49-2900 1941-45 FL,
Dan Henke
55-0011 51-1938 49-2909 1938-45 EL, 1941-45 FL,
55-0012 51-1947 49-2407 1946-48 FL, 1946-47 EL
explaining the
55-0013 51-1947 49-2412 1946-48 FL, 1946-48 UL TT Oil Tank
55-0014 51-1039 49-2900 1941-45 FL, 1941-45 UL
55-0015 51-1039 49-2909 1937-45 EL, 1941-45 FL
55-0016 51-1957 49-0835 1997-05 FLST
55-0017 51-1957 49-0839 1997-05 FLST
55-0018 51-1957 49-0843 1997-05 FLSTS
55-0019 51-1948 49-0835 1997-05 FLSTS
55-0020 51-1948 49-0839 1997-05 FLSTS
55-0021 51-1948 49-0843 1997-05 FLSTS
V-Twin Knucklehead Parts Dope Refer-
ence Guide for 100% V-Twin restoration
TT Bobber Short Oil Tank
components and Linkert tips for 1936-47
Knuckleheads is volume #2.
40-0488
VT No. 48-1331
Knucklehead Service and Parts Manual is

492 pages. Full parts service and dope man-
ual includes a detailed restoration section 40-0493
that is presented by Dan Henke of Cairo,
Replica “Bobber” Rigid Frame Oil Tank fits 1936-57 Big
New York. Dan illustrates allthe overlooked
Twins. Tank is 1⁵⁄₁₆” shorter to accommodate a raised position
items that can cost points during a competi-
for chain alignment. Tank will accept mini 12 volt battery.
tion when being judged. Shop book includes
VT No. Finish
service, parts and dealer tips for the models
40-0488 Chrome
and years that are listed.
40-0493 Black
VT No. 48-0928
628 37-1018 Spacers
Cincy Flyer from the 2008
show, built with the 51-1957
frame.
Retro Rigid™
51-1948
Replica Retro Rigid Frame fea- • 200 Rear Tire with belt
51-1957 tures original style construction +2” Raised Neck
including forged parts in neck, side • Stock Rake, 30°
CLASSIC
• Order related parts separately.
car mounts and rear axle areas.
• 44-1942 axle kit
10³⁄₄” between the rear axle plate.
• 44-1946 axle collars
Order rear mount for TC-88 mod-
VT No. Style
els separately.
51-1948 Wishbone
Frame will accept:
• Evolution or TC-88 engine,
51-1957* Straight Leg
Shovelhead, Panhead, Knucklehead *Note: Will not accept seat
• 5 or 6 Speed Softail Transmission post
• Flatside Tanks
• Softail Oil Tank
• 230 Rear Tire with chain
51-1957
Related Parts for 1” off-

set.
VT No. Item
17-0859 5 Speed Plate
17-0859 19-0570
19-0570
19-0570 Motor Spacer
51-0097
Retro Replica Rigid Frame are available with cross shaft
tube to accept stock mechanical brakes and star hub wheel.
Replica retro rigid frame original style is updated to accept flat
51-0096 side tanks. Original forged parts include: neck, side car mounts
and rear axle area plates. For all Big Twin engines with 4, 5
or 6 speed transmission. Features +2" raised neck and 10.75
between the axle plates. Will fit mechanical brake drum assem-
bly with a 160 x 16" tire.
VT No. Style
51-0096 Straight Leg
51-0097 Wishbone
629
V-Twin Replica Knucklehead Frame
V-TwinTM Replica Frames...the difference is REAL!
51-1040 51-1947 Over 5200
Served
Since
1995!
Use replica mount
kit for mounting
coil.
51-1938 51-1942
V-TwinTM Replica Knucklehead Frame is an authentic repro-

duction of the factory style frame. Details include forged parts as
original in neck, front and rear engine mounts, side car loops, top
seat yoke, footboard tabs and rear axle plates. Exact blanked and
formed stampings are utilized in appropriate areas. Rear fender
cross bar is supported by exact duplicated “saddles” brazed at
each end. Seat post and mechanical brake cross shaft bushings,
51-1041 correct tool box mount and grease fittings are installed. The 28°
or 29° neck angle will accept inline spring forks. The frame will
accommodate Knucklehead or Big Twin Flathead Engines and 3
or 4 Speed transmission only. Knucklehead frames require pur-
chase of clamp on coil bracket kit VT No. 49-0099.
*Note: Includes seat post, transmission plate and axle assembly.
Accepts Knucklehead or BT Flathead engine and 3 or 4-speed
Knucklehead Frame transmission. Includes seat post, brake cross shaft, rear axle 51-0827
VT No. Year Rake #1 #2 #3 assembly, transmission plate and a motor alignment plate
51-1040 1936 28° Rectangular Tool Box Pads No 5th Mount 7/8 Tank Brace for safer shipping. Cross shaft bushings, tool box mount and
51-1039 1937 28° Rectangular Tool Box Pads 5th Mount 7/8 Tank Brace grease fittings are installed. Forged parts: Neck, front and
51-1041 1938-40 28° Round Tool Box Pads 5th Mount 1” Tank Brace rear engine mounts, yoke and rear axle plates. Brazed parts:
51-1947 1947 30° 2 Tool Box Holes 5th Mount 1” Tank Brace Top motor mount, front tank mount, sidecar loops, footboard
mount, transmission strap, center post strap, rear fender cross
bar saddles, oil tank mount and upper rear frame bars at tank
The Construction tube.
V-Twin™ Replica Frames feature steel forgings in neck, front and rear engine *Note: For original look on rear axle plates, the rear brake slot
mounts, rear axle plates, swingarm and shock mounts. In this process, the steel on the left side must be cut out at the front. We have left this
is first fired as red hot ingot, next huge hammers compact and orient the grain closed for builder to remove as desired. *Note: Seat post and
structure into a rough shape of the parts. Subsequent hits form the part into its cross shaft bushings may require further reaming for proper fit.
final shape, after which it is machined and heat treated which results in increased Therefore frames will not be accepted for return
strength and resistance to wear. The related components used in construction are
accurately formed stampings and drawn over mandrel seamless tubing which is tig
welded together during final assembly. Welded Brazed Brazed Joints Year Rake
Joints 13
Toolbox Places Update
Bracket 51-1936 51-1040* 51-1936 1936 28°
51-1039* 1937 28°
Details 51-1041 51-1938* 51-1939 1938-40 28°
51-1941 — 51-1942 1941-Early 1946 29°
51-1947* 51-1946 1947 30°
Round 2 Bolt
Square
1941-47 51-0827 1936-47 Hardtail
1936-37 1938-40
630
V-Twin Replica Knucklehead Frame
51-1941
1936-40 Neck
CLASSIC
has original
forge mark!
Replica Frames with accoutrements as shown on detailed areas make this the premier frame in the industry.
Over 8,000
Served since 1995!
Brazed Joints
Steel Parts deliver full strength and exact Rear Engine and Front Transmission Forged Neck yields the hallmark look of this
detail in front engine and side car lugs. Mount is of forged steel, with bushing replica, which will accept a neck lock and glide
installed. Transmission mounts incorporate damper stud. Top engine mount has key hole
a formed reinforcement strap to connect the slot which is the 1953-57 type. Spark and
two tier support strap assembly, all of which is throttle cable mount tabs are also provided.
constructed accurately of blanked and formed
stampings.
631
V-Twin Replica Wishbone Frame
51-1200 51-1953
51-1949
V-TwinTM Replica Wishbone Frames are authentic reproduc-

tions of Big Twin rigid frames. Details include forged parts as
original in neck, front and rear engine mounts, side car loops,
top seat post yoke, footboard tabs and rear axle plates. Exact
blanked and formed stampings are utilized in their respective
places. Neck will accept steering key lock. Mechanical brake
cross shaft bushings, correct tool box mount and grease
fittings are installed. The 1949-52 model has lugs on inside Rear Section demonstrated
front down tubes to accept horn, 1948 model does not. Frame forged rear axle plates and
will house Panhead or Shovelhead engines and a 4 Speed replica tool box mount for
transmission. Complete kits include seat post, axle and trans- authentic look.
Seat Area utilizes cast yoke
mission plate. to accept stock seat post
“HM”
bushing which is included.
Replica Authentic Fits Rear down tube has cast
51-1200 51-1951 1949-52 front oil tank mount and
51-1953R 51-1954 1954
coil mount blocks installed.
51-1949 51-1250 1948
Lower tube bushing is weld-
51-1956 51-1955 1955-57
ed to secure lower seat post
Hallmark “HM” Series is with Forging Hallmarks! lock nut.
Our replica frames are available for Big Twins from 1936-
“HM” is our updated version with forging hall- 99 for the original look and style of the factory.
marks on many of the components. The follow- Complete Steering Head Lock
ing forged parts with Hallmark numbers and Assembly Kit includes cylinder
lock, two keys, pin, frame plug,
marks: seat yoke, front motor mount, side car spring and plunger.
loops, rear axle plates and transmission front/ 37-9021 VT No. Item
rear mounts. 37-9021 Complete Kit
51-0610 Trim Ring
Raw Steel Frame Forging
Hallmark Plate is an accurate V-Twin Mfg.TM Replica Wishbone
investment for reconstruction and Frame.
restoration of 1936-1957 rigid Immediate delivery
frames, includes various forging 51-1200
logos and numbers.
VT No. 51-0068
51-1953 51-1953 1953-54

Style features later
style top motor mount
and tool box mount.
632
V-Twin Replica Straight Leg Frame
V-Twin Mfg. is the sole
maker of Rigid Frames
51-1956
which utilize “Forged”
components!
Since 1995...
Replica Straight Leg Rigid Frame with cross tube is for
chain drive models. This frame is an authentic reproduction
of the 1955-1957 straight leg frame with a stock 30° neck
rake. Details include forged parts as original neck, front and
rear engine mount, side car mounts, top seat yoke, axle, seat
post and footboard tabs. Front engine mount spacer will allow 51-1956
CLASSIC
installation of a Knucklehead or Flathead engine. The frame
has an indent on the left lower rear frame bar from tooling fix-
ture. A Bill of Sale is supplied. Frame will accept Panhead and
Shovelhead motors. Note: Cross shaft, seat post, transmission
plate and rear axle assembly included.
Replica Authentic
51-1956 51-1955
Over 10,000 Served!
Retro Rigid
51-1948
51-1957 51-1948
Replica Retro Rigid Frame features original style

200 51-0096 construction including forged parts in neck, side car
mounts and rear axle areas. Order rear mount for
51-1957 TC-88 models separately. This retro rigid frame can
be fitted with a Panhead or Shovelhead engine with
a 4-Speed transmission. A tin inner primary 42-0617
must be utilized for this application. Use of a ¹⁄₂” offset
transmission mount plate and ¹⁄₂” offset motor sprocket
with splines will offer clearance to use a 200 or 140
rear tire with a chain rear drive. Additional clearance
can be achieved with the addition of a ¹⁄₄” offset trans-
mission sprocket.
Tire Style Type *Note: For Evolution/TC/Shovelhead/Panhead engines.
200 Straight 51-1957 Disc
200 Rigid Wishbone 51-1948 Disc Frame will accept:
140 Straight 51-0096 Mechanical • Flatside tanks • 31-0859 oil tank bracket
140 Wishbone 51-0097 Mechanical • Softail oil tank
Related Components • 44-1942 axle
VT No. Item Note • 230 rear tire with chain • 51-0625 TC-88/Evolution rear
17-0945 Engine Sprocket Nut Kit • 200 rear tire with belt engine mount adapter
19-0399 Transmission Sprocket Only 22T
19-0447 Transmission Sprocket Kit 23T • +2” raised neck • 44-1946 axle collars
19-0448 Transmission Sprocket Kit 24T • Stock rake, 30°
• Order related parts separately.
633
V-Twin Mfg. Replica Swingarm Frame
Swingarm 51-1006
51-1003 Pivot Points
Forged Steel
as Original
51-1004
51-1004
V-Twin Swingarm Frames are our authentic reproductions 1958-64 Style accepts a 6 volt battery, early wrap around tank
of FLH styles for the years listed to accept Panhead or and includes footboard tabs. Neck will accept plunger type lock
Shovelhead engines, 4 Speed Transmissions, seat posts and assembly. Features low seat area.
round or square swing arms. Details include forged parts as 1965-68 Style accepts a 12 volt electric start system as stock.
original in neck, engine mounts, front transmission mount, top Neck will accept lock assembly.
seat post yoke, strut and swingarm pivot mount and footboard 1969-84 Style accepts a 12 volt electric system. Neck includes
mounts, as required. All stamped components are pressed 17 digit serial number boss and tab for stem padlock.
and formed as stock.
VT No. Year
51-1003 1958-64
51-1006 1965-68 Seat Forged Front
51-1004 1969-84 Post Lower Motor
Neck Mount for
Yoke Strength
Detail
51-1006
Forged Neck is accomplished in 4 stages.

The Forging Process
In this process, the steel is first fired as red hot ingot, next huge hammers com-
pact and orient the grain structure into a rough shape of the part, subsequent
hits form the part into its final shape, after which it is machined and heat treated 1 2 4
which results in increased strength and resistance to wear. 3
634
51-0457
Hardtail
51-0920
51-0457
CLASSIC
51-0781
51-0457
Exact
Replica!
® Tedd Cycle
first use in
2003
The Bobber Replica
The “Bobber” style was perhaps the first mainstream customized

motorcycle following the motorcycle’s evolution from utilitarian
form of transportation to a vehicle used for recreation. From the
Harley–Davidson ‘Shop Dope’ , Nov. 16, 1937: “Suggestions for
51-0823 preparing 1937 & 1938 ‘WLDR’ model motorcycles for long- dis-
tance racing such as 200-mile race at Daytona, Florida. Remove
headlight, horn, muffler, speedometer, front mudguard, and rear
half of rear mudguard. (Some riders make up short narrow front
fender for sand kicked up by the front wheel.).” There are an
additional 12 points concerning the turning & preparation of the
motorcycle for racing, you can see the beginning of the bobber
style. It wasn’t a big step for racing enthusiasts to copy the racers
51-0827 of the day, strip off all unnecessary parts from there stock bikes to
reduce weight and make them at least look fast and lean. This was
the birth of the “Bobber”, a styling cue named for the ‘bob tailed’
rear fender and based more upon what’s not there, a minimalist
form- follows function exercise. Plus it was a financially economical
look; any kid from the early 1950’s could buy a beat up or army
surplus motorcycle for a few bucks, take off the some sheet metal
and the muffler and have a hot rod. Add a fancy paint job and
you have custom motorcycles to go along with the chopped and
channeled hot rod cars of the day. ‘Speed’ lines borrowed from the
Big Twin Weld-On Hardtails fit to stock frames for 1958-85. art deco era & graphic embellishments like scallops made them all
VT No. Drive Style look like they were going 100 mph whole standing still. Scallops
51-0920 Replica Chain Drum got longer and evolved into flames. Bobbers eventually evolved
51-0781 Replica Drum into choppers, where frames were chopped & raked to accom-
51-0457 Replica Assembly modate extended front ends, everything got chromed, and the
51-0823 Replica Rear Section motorcycles were customized from the frame out. But the Bobber
51-0827 Knuckle Rigid Rear Section was where it all started.
51-0068 Forging Number Set 635
51-0827
Frame Tabs, Mounts, Seat Tabs and Bars
51-0503
49-2560
Rigid Vibrator Bar fits between side car loops on 1936-57
51-0508 51-0528 stock rigid frames.
VT No. Item Finish
49-2560 Bar Only Chrome
49-2630 Bar Only Parkerized
51-0501 51-0667 Bar and Spools
51-0502 51-0545
51-0632
51-0845
51-0513
51-0644 51-0511 51-0512
51-0592
Weld-On Mount Tabs fit Rigid Frames when mounting brake units.
31-0475
VT No. Type
51-0511 Hydraulic Rear Back Plate
51-0512 Caliper Arm Tab
51-0593 51-0573 51-0513 1987-99 Caliper Mount Strap (Right Side)
51-0845 1987-99 Caliper Mount Strap (Left Side)
.036” Big Twin Engine Mount
Shims for front and rear 1936-99.
VT No. 31-1306
51-0529 51-0598 49-1258
A C 51-0509
49-1259 51-0503 51-0511 Big Twin Top Engine Mounts are two halves with seat tee
and rear tank mounts incorporated into the top mount. Weld in
51-0522 place for accurate restoration.
VT No. # Fits
51-0509 1936-47 Knucklehead
51-0510 51-0512 51-0584 A 1948-52 Panhead
Rigid Big Twin Frame Repair Parts to be welded on for restoration or 51-0530 B 1953-69 Panhead-Shovelhead
repair. 51-0505 C 1970-84 Shovelhead
VT No. Item
51-0503 5th Transmission Mount
51-0508 Side Car Loop Only
51-0528 Rear Axle Plates Right and Left Pair
51-0502 Right Front Brake Boss End, 2 Hole
51-0501 Left Front Shift Boss End, 3 Hole
51-0545 1948-54 Lower Tank Mount with cross plate 51-0427 51-0594 51-0533 51-0567
51-0644 1948-54 Lower Mount Tab Set
51-0632 1955-57 Lower Tank Mount without cross Seat Post Top Yoke.
51-0592 1948-54 Front Cable Tab VT No. Year
31-0475 Motor Mount Frame Spacer
51-0593 1948-53 Horn Bracket Strips Set 51-0686 1936-47
51-0573 Crossover Tube Only 51-0427 1936-47, Note: Stamped with “XE-1 DIF4”.
51-0529 Front Oil Tank Mount 51-0594 1936-47
51-0522 Rear Motor and Front Transmission Mount 1936-57
51-0598 Saddles for Seat 51-0533 1948-57
49-1258 Tool Box Pad Set, Round, ⁵⁄₁₆ x 24 51-0790 1948-57, Forged
49-1259 Tool Box Pad Set, Rectangular, ⁵⁄₁₆ x 24 51-0567 1958-84
51-0510 Rear Fender Mounting Bracket
51-0731 Axle Plate
51-0668 Top Frame Tube 1¹⁄₂”
51-0669 Wishbone Front Tubes
51-0675 Seat Post Tube
51-0676 Rear Top Frame Legs, Knuck
51-0677 Fender Cross Brace, Knucklehead 27-0664 27-0311
51-0678 Fender Cross Brace, Pan Big Twin Footboard Tabs available in stamped or authentic
51-0679 Lower Frame Tube Brace
51-0706 Frame Brace Tube forged steel construction for custom or stock frames. Sold in
51-0682 Rail Set pairs to be welded on 1936-84 models.
51-0437 Rear Forging Mount VT No. Dia Type
51-0439 Front Forging Engine Mount
51-0527 Rear Frame Motor Mount, Front and Rear 27-0664 1” Forged Exact
51-0144 Raw rigid frame seat post plate set 27-1560 11/8” Forged Exact
51-0172 Lower Frame Front Motor Mount
51-0535 Triple Tree Neck Frame Tab 27-0311 Stamped Tabs
51-0701 Frame Sleeve Tubing
51-0685 Rigid frame rear engine mount & front trans. mt w/forging mark. Neck Lock Tab to be welded on Big Twin neck
51-0686 Seat Mount with forging mark for use with lower glide lower tree with tab.
VT No. 51-0517
636
Frame Component
G
Frame Repair Tabs to weld on to repair stock frames.
VT No. # Fits Type 51-3157
51-0579 D 1958-84 FL Rear Pipe
51-0570 F 1965-84 Big Twin Upper Shock Mount, pair
51-0569 1958-64 Big Twin Upper Shock Mount
51-0517 G 1969-up Big Twin Neck Tab for Lock
51-0506 H — Gusset Plate
51-0599 I — 5th Mount Transmission Cast Numbers
51-0145 1936-57 Plate Set
Coil Mount Block Set .

8824-8Z
VT No. Item Thread
8824-8 8824-8 Stud Set ³⁄₈” —24 UNC
CLASSIC
8824-8T Stud Set
8824-8Z Stud Set ³⁄₈” —16 SAE 51-0523
8824-8C Stud Set Cadmium 51-0585
51-0500
51-0632 51-0639 51-0666
51-0595
51-0526
Lower Tank Mount for 1955-84 FL.
VT No. Item Front Side Car Frame Loops fit rigid frames for replace-
51-0632 Welded Mount ment and repair, will accept 1” diameter tubing, pair, front
51-0639 Cross Bracket lower mount, each. Front engine mount is one piece forged
51-0666 Welded Set with three holes on left and two holes on for brake side.
Components must be welded on.
Weld In Lock Insert is cast
51-0958 VT No. Item
steel for 1936-84 frames.
51-0523 Side Car Loop Set, Straight Leg, Right and Left
VT No. Item
51-3157 Side Car Loop Set, Right and Left,
51-0958 Casting
Embossed Factory Numbers
51-0349 Insert with lock
51-0349 51-0508 Frame Side Car Loop Set
51-0585 Side Car Loop Set, Wishbone Set
Weld On Dowels are tapped for ⁵⁄₁₆” — 24 UNF 51-0483 Wishbone Side Car Mount Set
thread. 51-3647 1936-47 Front Engine Mount
VT No. 51-0858 51-0595 1936-47 Front Engine Mount
51-0526 1948-84 Front Lower Mount
Top Frame Casting fits 1948-65 51-0500 Cast Side Car Mounts
Panhead. 51-0068 Casting Number Plate 51-0483
VT No. 51-0067
51-0623
51-0606
1936 Style Side Car Mount Set and Cross
Bar.
VT No. 49-1320
Complete Steering
51-0596
Head Lock Assembly
Kit includes cylinder lock, 51-0525 51-0525
two keys, pin, frame plug,
spring and plunger.
37-9021
VT No. Item
51-0610 Trim Ring
Big Twin Neck Forgings machined to accept stock diameter
tubing. 51-0520 features late number boss and tab for pad lock.
VT No. Year Rake
51-0623 1936-40 28°
51-0596 1941-45 29°
51-0606 1946-E47 30°, Bull Neck
51-0430 1947
51-0525* 1948-68 30°
51-0520 1984-99 30°
*Note: Machined to accept neck lock tumbler 37-9021.
637
Shock and Shock Cover
54-0113
54-0028
Duro Exposed Shocks feature nitrogen charge pump to fit
1973-84 Big Twins.
54-0112
VT No. Length
54-0028 11” All shocks are measured eyelet to center of eyelet.
54-0029 12” Shock Sets for FL-FLH-FX-FXE except FXR-FLT.
VT No. Style Length Year Type
54-0112 Stock 12.0” 1973-85 Chrome Springs
54-0113 Stock 12.0” 1973-85 Full Covered
54-0108* 1” Shorter 11.0” 1973-85 Chrome Springs
54-0107* 1” Shorter 11.0” 1973-85 Full Covered
*Note: Feature chrome body and springs, lower bike.
13.5” Shock Sets fit FL-FLH-FX
1958-72 Big Twins. 54-0110 54509-71A 13.5” 1958-72 Chrome Springs
VT No. Type 54-0111 54500-67 13.5” 1958-72 Full Covered
54-0027 Exposed 28-0220 All Rubber Bushing
54-0027 54-0030 Covered
54-0030 Chrome Shock Springs convert FL to FX
style exposed chrome springs or to replace
54-0089, springs on FX models. Springs are stock ten-
54-0087 All shocks sion. Sold as a pairs.
are mea- VT No. OEM Lgth Years
54-2004 sured 54-0151 54570-67 13.5” 1967-72 FLH
eyelet to
center of
eyelet.
Chrome Shock Covers are a 1950’s
Progressive Suspension 412 Series Chrome Shocks are manufac-
style top cover. They fit all models of
tured from the finest material available. Magnum 412 Series shocks
are nitrogen charged with six-stage automatic damping and an adjust-
swing arm with stock shocks including
able spring preload. Available with chrome spring and end caps. Shock Electra Glide 1958-64, 1965-82 without
cartridge is not chrome. All shocks are measured eyelet to center of saddlebag guards. Replaces 54704-52
eyelet. and 54705-52.
Year/Model 12.0” 13.5” VT No. 54-0154
1973-84 FLH-FX 54-2004*
without
54-0156 Chrome Shock Spring Covers.
cover
54-0089* VT No. 54-0155 and 54-0157 fit V-Twin
with cover shock assemblies 1967 and later, with
1958-72 FL-FLH 54-0087* upper spring retainers. VT No. 54-0402
with cover is replica type for shocks which disas-
*Note: Denotes stock length shock. When installing other than stock semble at lower eye.
length shocks, tire to fender clearances must be checked. VT No. OEM Fits/Length
Shock Tool for 1958-81 FL-FX scissor 54-0155 54702-67 1967-72 FL-FX
type. Replaces 94700-65. 91/2”
VT No. 16-0100 54-0402 54702-56 1956-66 XL and
Big Twin
Replica Type
54-0156 54702-73 1973-84 Big Twin
638
28-0133
Shock Stud
54-0418 54-0464
Shock Stud Conversion allows use of shocks with ¹⁄₂” holes with
steel inserts. Simply press out stock bushing and sleeve, replace
with the 2-piece style. Fits the ⁵⁄₈” diameter studs on many models. 54-0466
Use a ⁵⁄₈” cup washer for final assembly. Set of 8 rubbers.
VT No. Item 54-0462
28-0133 Rubber Bushing
54-0418 5/8 Cup Washers, 10 pack
Shock Bushings fit 1958-84 Big Twin,
pack of 10. Replaces OEM 85210-42A.
VT No. Item
28-0220 Bushings
37-0431 Steel Sleeves
CLASSIC
Shock Stud Washer 10 pack. 54-0463
54-0465
VT No. OEM Type Finish

54-0418 54544-65 ⁵⁄₈” Hole Cup Chrome
54-0419 54543-65 ³⁄₈” Hole Cup Chrome
54-0420 54545-65 ¹⁄₂” Hole Cup Chrome
54-0421 6718 ¹⁄₂” Hole x 1” Flat Chrome
54-0424 6722B ⁵⁄₈” Hole x 1.3” Flat Zinc
54-0432 6415B ³⁄₈” Hole x 1.25” Flat Zinc
Nyloc shock stud nut is Shock Stud Kits feature all pieces for upper and lower posi-
⁵⁄₈-18 UNC thread, replaces 7993. tions. Including washers, nuts and lockwashers as necessary.
VT No. Finish Qty Studs and bolts are zinc plated. Outer nuts and washers are
54-0422 Zinc 10 chrome.
54-0447 Chrome 4 VT No. Year
54-0466 1958-64 *Note: with chrome studs.
54-0464 1958-64
54-0463 1965-66
54-0204 54-0203
54-0462 1967-72
54-0465 1973-84
54-0412
54-0429
54-0408
54-0401
Replacement Hardware fits stock or aftermarket shocks 1967 54-0410

later, top clip type.
VT No. OEM Item U/M Rear Shock Studs, with cup washers. Each kit includes two
54-0204 54558-73 Rotating Cam Pair studs and four chrome plated cup washers. Cup washers and
54-0203 54559-73 Cam Sleeve Pair lock nuts may be purchased separately.
54-0429 54700-67 Upper Cover Pair Upper Pair
Stock Stud Spacers replace Chrome Zinc OEM Fits
5960W on 1965-85 FLH when rear 54-0445 54-0408 54515-58A 1958-64 FL ³⁄₈” thread
frame bars are not used. Zinc plat- — 54-0409 54515-65 1965-66 FL
ed, pair. 54-0440 54-0410 54515-67 1967-72 FL-FX
VT No. 54-0425 54-0442 54-0416 54515-73 1973-84 FX
Lower Pair
54-0446 54-0411 54517-58 1958-64 FL
— 54-0413 54517-65 1965-66 FL
54-0441 54-0412 54517-67 1967-72 FL-FX
— 54-0401 3958 1973-84 FL-FX
639
Swingarm 44-1973
Rebuild Kit
44-1958
1958-86 Big Twin Swingarm Pivot Kit includes pin, spacers,

seals, bearings, races and lock. VT No. 44-1995 includes 1”
longer pin for stripped out frames.
VT No. Year Model
51-2149 Installed to accept 160 series tire
44-1958 1958-72 FL-FLH
44-1973 1973-85 FX-FL-FXWG-FXE-FXS
44-1995 1973-85 Includes Special Pin
44-1996 1958-85 Special Pin Only
51-2149 44-1974 1985-86 FXWG-FXE-FXB
44-0103
44-0102
51-0907 51-0898
Big Twin Swingarm Bearing Kit includes tapered bearings,
races, and seals for each application.
VT No. Fits
44-0102 1958-72
44-0103 1973-85
44-0105 44-0106
51-2149 51-0908
74 and 80 Swingarm Rebuild Kit includes 44-0405

parts pictured for all 1958-84 Big Twin models.
VT No. OEM Years Use
44-0105 — 1958-72 Bearings,
Races and Seals
51-0825 51-0908 44-0106 — 1973-85 As Above
44-0425 — 1958-85 Bearings and Races
44-0100 47517-58 1958-84 Spacer (2)
17-0909 47513-58 1958-84 Lock Tab (10)
44-0101 47510-58 1958-84 Black Pivot Bolt
44-0099 47510-58 1958-84 Chrome Pivot Bolt
1973-85 FX-FL Swingarm available for chain and belt drives. 44-0405 9033 1958-84 Cup and Cone (1)
Bearings/races not included. For use with banana style caliper 14-0138 47519-58 1958-72 Seals (5)
only. VT No. 51-2149 will accept up to 160 tire with chain. 14-0139 47519-72 1973-84 Seals (5)
Chrome Black Year OEM Type 44-0406 — 1958-84 Bearing Only
51-0907 51-0898 1973-E78 47500-73 Standard Swingarm Pivot Bolts.
51-2149* Custom ¹⁄₂” Wide VT No. 44-1996 and
51-0908 51-0825 L1978-1984 47500-78 Standard 44-0082 are used to reme-
51-0741 L1978-1984 1¹⁄₄” Lower, Chain dy a stripped out left side frame boss, VT No. 44-1996 is 1” lon-
*Note: See listing in Big Twin Section for custom length rear ger on threaded end and VT No. 44-0082 is self tapping .025”
axles. oversize. All others are stock configuration.
1958-72 Round Rear Swingarm features VT No. OEM Finish Year Model
forged axle plates with round tube con- 44-0101 47510-58 Black 1958-84 Big Twin
struction. Raw finish, replaces 47500-58B 44-0099 47510-58 Chrome 1958-84 Big Twin
VT No. 51-0972 44-1996 1” Longer Chrome 1958-84 Big Twin
44-0082 Self Tapping Black 1958-84 Big Twin
Swingarm Bearing Seals are for FL-FX.
James VT No. OEM Fits
14-0657 14-0138 47519-58 1958-72
14-0658 14-0139 47519-72 1973-84
640
Sissy
Bar
50-0320 50-0815 50-0817
50-0322
50-0813
50-0811
CLASSIC
50-0816 50-0819
50-0805 50-0804 50-0806
12" 10”
11”
Side 20” Square 16” Square Round Square
Square Upright
Fitment Straps Upright Upright Upright Grab
Upright Width
Chrome Chrome Chrome w/Tilt Top Rail
Chrome
Chrome Chrome
1958-84 FL-FLH 50-0805 50-0462 50-0811 50-0322 50-0815 50-0819 8¾”

1972-85 FX 50-0804 50-0813 50-0320 50-0817 8”
1982-94 FXR 50-0806 50-0812 50-0893 50-0816 6¾”
50-0820 42-0156
Sissy Bar Inserts mount with screws to cross bar.
VT No. Type
42-0156 Live to Ride
Eagle Spirit Medallion with gold inlay is
3¹⁄₂” for universal, and has an adhesive
backing.
VT No. 42-0538
42-0538 This is the Easiest Sissy Bar Assembly

mount to all Swingarm models!
Fender Mount Sissy Bar Kit includes mount bracket and 8¹⁄₂”
grab rail, measured from top of fender, with chrome finish.
VT No. 50-0503
641
Sissy Pad
47-1963 47-1964 47-1972
47-0949
Flatlander Mini Back Rest in black features a stainless steel

31-1987 insert with chrome frame mounting system for short sissy
47-0457 bars. Measures 5¹⁄₂" wide X 3" tall X 1¹₅" thick.
Button Sissy Bar Pads mount to square stock sissy bars, Mini VT No. 47-0753
fits 12” bar, 2 button fits 16” bar. Chrome mount clamps includ- Sissy Bar Pad Kit
ed, black only. includes a black vinyl
VT No. Type sissy pad with a chrome
47-1963 Mini clamp to attach to the
47-1964 2-Button sissy bar. For custom
47-1972* Smooth applications.
47-0457* Buttoned VT No. 47-0481
47-0478 Buttoned
47-0949 7.5 x 9
31-1987 Brackets for Above
*Note: For use on OEM Sissy Bars spring kits only
Luggage Rack
50-1013 Installed 47-1974
Installed
50-1013
49-2523
50-1661
Three Channel Luggage Racks. Classic style of the 1960’s Luggage Rack Pad measures 12³⁄₄” x 9” with quick release
for FLH models for 1958-84 FLH. spring loaded clamps to fit 3-channel stock luggage racks.
VT No. OEM Item VT No. Item
50-1013 53403-58D Luggage Rack 47-1974 Pad Kit
37-0545 90908-58 Strut Spacer 49-2523 Clamps
50-1661 53403-52 Rigid Luggage Rack
49-0304
Chrome Luggage Rack is
fender mounted for loads of 10
pounds or less. Fits 1982-94
FXR and 1976-85 FXE. 9” x 6” in
size. VT No. 50-1019 49-0951 49-0832
50-1563 Wyatt Old Style Luggage Rack is a replica

2591-12 Luggage Rack Mount Kit of 1940’s accessory, contours all rear fend-
VT No. 2591-12 ers 1934-up. Great for attaching thro-over
saddlebags. Does not interfere with post
mounted buddy or police solo seats.
VT No. Finish
FXWG-FXST Luggage Rack is for 49-0304 Polished
1980-99 models and many Swing 49-0951 Chrome Replica
Arm frames fitted with a bobbed 49-0832 Black Replica
rear fender rack contours to fender 37-2096 Chrome Screw, 4 pack
curves. 50-1563 Black Strap
VT No. 50-1001 49-2523 Clamps
642
2” Drag Pipe
CLASSIC
30-0520
Shot Gun Shovelhead Pipe Exhaust with a 1¾” outer diam-

eter.
VT No. Finish
30-0520 Black
1³⁄₄”
30-0521 Chrome
30-0726
30-0721
30-0755 30-0726
2”
30-0587 30-0725 Installed

30-0586
Wyatt Gatling Down Draft Drag Pipes fit 1970-84 FX, FL.
2:1 Header Pipe Set fits 1971-84 FX with a 1¾” outer diame- Chrome Black O.D.
ter features a 2 piece design. 30-0721 30-0755 1¾”
Chrome Black 30-0725 30-0726 2”
30-0586 30-0587
643
1³⁄₄” 1971-84 FX-FXE Exhaust
T-Bolt Set is a replacement for all of our muf-
fler pipes which have channel type mounting.
Supplied with nut.
VT No. U/M
31-2116 Pair (2”)
31-0223 10 pack (2”)
31-1971 Pair
31-0189 31-0188 FXR Exhaust
Pipe Brackets,
zinc plated.
VT No. OEM Type
31-0189 65670-82 Front
31-0188 65671-82 Rear
FXR Exhaust Bracket Mounting
29-0822 Installed Block fits 1982-86 FXR models.
Sold as each. VT No. 28-0229
Note: For models with forward controls only
29-0822 30-3017 30-3101
Radii 1³⁄₄” Drag Pipe Sets for 1971-1984 FXE models. Pipes
are 38" long with slash cut ends and have channel mounts for
mounting. Available with chrome with black tips or full chrome.
Order channel mounting bracket and heat shields separately.
VT No. Item
30-3017 Chrome Pipe Set 30-3237
30-3101 Chrome Pipe Set with Black Tips
31-4050 Black Mounting Bracket
31-4058 Chrome Mounting Bracket
30-3237 Chrome Heat Shield Set
50-1106 50-0768
50-1064
29-0824
Stock Type Rear Fender fits 1981-up FXR-FXRS models.
2:1 Exhaust Headers for use forward controls. Fits 1970-84 Replaces 59634-81A.
Shovelheads. VT No. Item Year
VT No. Finish 50-0768 Fender 1981-94 FXR
29-0822 Chrome Struts
29-0824 Black Chrome Polished Fit
30-3381 30-3019 50-1064 50-0286 1982-86 FXR
50-1106 50-0285 1987-94 FXR
30-0797 30-0800
Goose Style Drags. Retro chopper styling in 1³⁄₄” diame-
ter slash cut ends, and a length of 35” long. Use 31-2101
P-Clamps for mounting. Fits 1970-84 74 and 80 FXE. 30-0796
VT No. Brand 2:1 Chrome Exhaust Billet End Tips fit 1¾” straight cut drags.
30-3381 Wyatt’s Header Slip-On Set. VT No. Finish
30-3019 VT Down Slash fits 1971-
30-0796 Chrome
1984 FX.
VT No. 30-0439
30-0797 Black
30-0800 Black, taper
644
Upsweep Exhaust Shot Gun
Drag Pipe
30-3164
29-0094
Installed 30-0580
Chrome Knucklehead Upsweep Pipe Set includes front and
rear upsweep pipe set for rigid frames. Front Pipe is two piece Shot Gun Exhaust Systems fit Rigid or FXST-FLST frames
type. Use 1¾” extensions or mufflers. only. Will not fit frame with shocks unless noted. Available as
VT No. Type a drag pipe with slash cut ends or with tapered muffler. Pipes
29-0094 Upsweep have 13/4” outside diameter unless noted.
30-0580 Stacked Upsweep Drag Fits
31-9920 End Clamps 29-0094 30-3158 1970-84 Shovelhead Kickstart only
31-2101 P-Clamps 30-3155 1966-69 Shovelhead
30-3164 1966-84 FX-FL
CLASSIC
29-0090 Installed *Note: 40” Pipe Set clears shocks and FXE Battery.
Designed for swing out kick arm VT No. 17-0307.
30-3153
Shot Gun Drag Pipe Sets for Rigid or Swing Arm models as
noted. Bracket not supplied. Note type of front pipe. Outside
is a 2 piece set, flat pipe type is three piece set.
Up Sweep Header Sets will accept straight fishtail extensions VT No. Model F Pipe Frame
or mufflers which must be purchased & mounted separately. 30-3153 Knucklehead Flat Rigid
VT No. Model Year Note/Frame
29-0092 Panhead 1948-57 #1 Rigid
1. Features ‘S’ type front pipe for better ground clearance. Three piece system
29-0088
Installed
30-3205 Installed
Shot Gun Drag Pipe Sets for Rigid or Swing Arm models as
noted. Bracket not supplied. Note type of front pipe. Outside
is a 2 piece set, flat pipe type is three piece set.
VT No. Model F Pipe Frame
30-3163 Panhead Flat Rigid
30-3205** Panhead Flat Rigid
Up Sweep Header Sets will accept straight fishtail extensions **Note: Side by side shorty
or mufflers which must be purchased & mounted separately.
30-3155
VT No. Model Year Note/Frame
29-0090 Early Shovelhead 1966-69 #1-2-3 Rigid
29-0088 Shovelhead 1970-84 #2 Rigid
29-0085 Shovelhead 1970-84 #4 Swing Arm
1. Features ‘S’ type front pipe for better ground clearance. Three piece system.
2. Will not fit with electric start wrap around oil tank.
3. To be used with hydraulic brakes only.
4. Can only be used with FXE type Battery Box
T-Bolt Set is a replacement for all
of our muffler pipes which have Shot Gun Drag Pipe Sets
31-2116
channel type mounting. Supplied VT No. Model F Pipe Frame
with nut. 30-3164 Shovelhead Flat Rigid
VT No. U/M 30-3155 Shovelhead Outside Rigid
31-2116 Pair **Note: Side by side shorty
31-0223 10 pack
645
2 into 1 Exhaust 1970-84 FLH Dual
29-0146
Crossover System
Right Side
29-1101
29-1160
Left Side
Chrome Dual Pipe Crossover System less Mufflers features
intersection of left side cross over at rear pipe, 1¾” outside
diameter. Fits 1970-84 Shovelhead. Order heat shields and
mufflers separately. Pipes are for kick and electric.
VT No. 29-1101
29-0147 29-0158
29-1155
30-0586
Stock Type 2 into 1 Exhaust. Single type for 1970-84 FLH 30-0587
fits Shovelheads when the front pipe is inside front frame 2:1 Siamese Header Set fits Shovelhead models.
tubes. VT No. Fits
VT No. Type Year Shield 30-0586 Chrome
Set 30-0587 Black
29-0146 Chrome, K & E 1970-84 FL 30-0333
29-1160 Chrome, K & E 1970-84 FL with Heat shields
29-0147 Black, K & E 1970-84 FL
29-0158 Chrome, Electric Only 30-0333
1970-84 FL-FLH
N/A Chrome 1980-84 FLT 30-0308
Chrome Crossover Exhaust Pipe for
Big Twin models with crossovers. To fit
stock systems only. Replaces 65494-70.
VT No. 30-0226
646
Two Piece Heat Shield Set fits
29-1165 for 1970-84 FLH. 1970-84 Dual
VT No. 30-0292
Exhaust
Right Side View
Chrome Super Muffler Clamp Set attach-
es muffler to 1¾” header pipe. 29-1192
VT No. 31-1007
31-0706 31-0707 31-0708

29-1192
29-1192
31-2118
31-2117
Dual Exhaust Pipe Clamp Kits are for FLH models.
Order pipe support separately for 1958-84.
CLASSIC
VT No. Year Item
31-0706 1958-65 Clamp Set
31-0707 1966-69 Clamp Set
31-0708 1970-84 Clamp Set
31-2117 Right Side Support
31-2118 Left Side Support
48-0127
48-0125
48-0126 29-1192
48-0131 29-1165
48-0157
48-0132
High Temperature Exhaust Wrap reduce radiated exhaust
heat. Wrap that will withstand up to 2000 degrees. Tie wraps
sold available separately.
VT No. Size Item
48-0125 14” Stainless Tie Wraps, 4 pack
48-0157 Stainless Wraps, 10 pack
48-0126 25’ x 2” Black Wrap
48-0127 25’ x 2” Tan Wrap
48-0131 25’ x 1.5mm White Wrap
29-1165
48-0132 25’ x 1.5mm Black Wrap
48-0251 25’ x 1.5mm Silver Wrap
48-0137 25’ x 2 Brown Wrap
48-0139 25’ x 2 Copper Wrap
Footboard Mount Kit fits 1970-84 FLH

with drag pipes.
VT No. 27-0599 True Dual Chrome Exhaust Systems feature a single pipe
for each side. Each pipe is independent. Rear pipe is for the
left and front pipe is for the right without intersection. 1¾”
Footboard Bracket to replace the right outside diameter. Order heat shield set separately. Does not
side factory floorboard mount if you include hardware. Uses 1¾” slip on mufflers.
want to retain footboards on a 1970-84 VT No. Fits Shield Set
FLH when using a drag pipe. 29-1165 1970-84 Shovelhead FLH 30-0674
VT No. 31-0098 29-1192 1970-84 Shovelhead FLH —
with fishtail kit
647
Knucklehead Exhaust
29-1116
29-1115
30-0995
29-1115 30-0803
Installed
30-0995
1936-47 Knucklehead Two Into One 30-0803

Exhaust are designed to replace stock
style 1¾” outside diameter pipe sys-
tems.
Replica 3 Pc Finish
29-1116 29-0182 Chrome
29-1115 29-0181 Black 30-0165
30-0803 Black Kit
30-0176 30-0177
30-0166
30-0746 Replacement Muffler With Built-In Y-Pipe. Replaces 65201-
30-0199
37. Used on1936-40 Knuckle, 1936-40 UL.
VT No. Type
30-0200 30-0981 30-0165 Black
30-0166 Chrome
49-2592
1936-47 Knucklehead Exhaust Pipes. Flat connector pipe
features exact riveted construction as original. Y-Pipe features
factory style saddle.
49-2577 49-2578 49-2591
Chrome Black OEM Type Note: Three and
— 30-0261 65440-36 Front four Piece Replica Rear Hanger Reinforcement Clip braces rear muffler clamp at
30-0746 30-0981 65465-36 Flat
Exhaust Systems mount bolt. Body clamp not included.
require hand fit-
30-0199 30-0200 65505-41 Y-Pipe ting during final VT No. Finish Year/Model
— 30-0981 65465-36 Flat
assembly. We 49-2577 Black 1930-36 UL
suggest to loosen
Replica Type motor mount bolts 49-2578 Black 1936 EL, 1937-40 UL
during installation 49-2591 Chrome 1936 EL, 1937-40 UL
30-0762 — 65440-36 Front to allow pipes to
30-0748 30-0747 65493-36 Rear adjust to motor 49-2579 Black 1941-47 FL 49-2579
position then 49-2592 Chrome 1941-47 FL
30-0746 30-0981 65465-36 Flat re-tighten engine
30-0864 30-0975 65505-41 Y-Pipe bolts. 31-3950 31-3951
31-4187
Exhaust Pipe Clamp Sets complete in black or chrome for sin-
gle exhaust. Number of clamps in each kit shown.
Watch Our Video! Parkerized Chrome Year Model #
http://www.youtube.com/user/ 31-2125 31-3950 1936-40 Knucklehead 3
TeddCycle?feature=watch
31-2126 31-3951 1941-47 Knucklehead 4
Chrome Knucklehead Drags 31-4187 31-2930 1941-47 Knucklehead 3
fit 1936-47 models 61 and 74”, 2772-22 2719-22 1936-57 Bolt Set
1¾” inner diameter. Rear Clamp Kit with reinforcement clip for
VT No. Item 1941-57 BT.
30-3120 Pipes 31-4084 31-1264 VT No. Finish
31-2101 P-Clamps 31-1264 Parkerized 31-4084* Chrome Set
Drag Pipe Set 31-1269 Stainless 31-4085* Parkerized Set
Clamps Not Included With 31-1295 Parkerized *Note: Does not include
Header Sets. 31-4085 31-1297 Chrome reinforcement clip
648
True Dual Exhaust 1948-69
29-1108 True Dual Chrome Exhaust Systems by
29-1106
Paughco, feature a single pipe for each
side. Each pipe is independent. Rear pipe
for the left side and front pipe for the right
side without intersection. Panhead styles
fit with or without mousetrap. The pipes
have 1¾” outside diameter. Order heat
shield set separately. Does not include
VT No. Fits hardware. Use 1¾” slip on mufflers.
Note: Three and Four Piece Replica Exhaust Systems
29-1106 1948-64 Panhead require hand fitting during final assembly. We suggest
Crossover Kits.
29-1107 1965 only Panhead to loosen the motor mount bolts during installation to
allow pipes to adjust to motor position then re-tighten
29-1108 1966-69 Shovelhead engine bolts.
Dual Pipe Crossover System 1948-69

31-0706 31-0707
CLASSIC
29-1102
Dual Pipe Cross Over Systems less mufflers, chrome. Feature Dual Exhaust Pipe Clamp Kits for FLH. Order pipe support
intersection of left side cross over at rear pipe, 1¾” outside diameter. separately for 1958-84.
VT No. Year/Model Shield Set VT No. Year VT No. Year
1949-57 Panhead, Rigid Mechanical 30-0302 31-0706 1958-65 31-2117 Right Side Support
with Mousetrap 31-0707 1966-69 31-2118 Left Side Support
1958-64 Panhead with Mousetrap —
29-1164 1965 only Panhead with Mousetrap — Single.
Kick and Electric 31-0926 1958-69 31-2117 Right
29-1188 As Above Replica — Rear Cross Over Pipe Clamp bolts to rear
29-1102 1966-69 Shovelhead, four piece — cylinder base, each.
Kick and Electric VT No. OEM Fits Finish
31-3946 65510-54 1954-61 Cadmium
31-4189 31-4189 Paughco 1954-61 Chrome
1948-84 Exhaust Component

Replica Front Cylinder Header Pipe.
Chrome Black OEM Years 30-0225 30-0162 Chrome Rear Exhaust Pipes are
for Big Twin models with cross-
30-0547 30-0562 65440-48 1948-65 overs. To fit stock systems only.
Chrome Rear Exhaust Pipe for Big VT No. OEM Years
Twin with crossovers. To fit stock 30-0225 65494-61 1958-64
systems only. Fits 1958-65 Panhead, 30-0162 65494-65 1965-69
replaces 65496-61. VT No. 30-0222
30-0746 B
A
30-0222
Front Pipe to Frame Clamps for 1936-69. Set
includes 65512-37A pipe clamp and 65513-58 to
frame for secure installation. C
VT No. Item D 30-0864
31-0229 31-3989 Set, Parkerized 30-0573 C
31-0229 Set, Chrome
31-3988 Frame Clamp Only, Black 1958-84 Stock Exhaust Connector Flat & Y Pipes are stock
31-0926 Front Clamp Only, Parkerized replacement type.
30-0173 30-0259 Cylinder Chrome Black # OEM Years Type
30-0749
Pipe for use 30-0746 A Replica 1936-64 Flat
with single 30-0864 30-0898 D Replica 1936-57 Y
exhaust. 30-0199 30-0200 B 65505-41 1936-57 Y
30-0745* B Replica 1958-64 Y
30-0561 30-0201* 30-0202* B 65505-58 1958-64 Y
Chrome Black Year 30-0194 30-0573 C 65538-65 1965-69 Combo
30-0173 30-0259 1948-65 *Note: 30-0745 is 15" long and 30-0201 & 30-0202 are 161/2"
30-0561 30-0749 1948-65 long.
649
Panhead Clamp
1948-65 Panhead Exhaust Clamps.
VT No. Item Finish Type
31-2113 Allen Type Chrome Allen
31-2113 31-0265 31-3960 31-0265 As Above, two piece type Chrome Allen
31-2111 31-3960 Extra wide Chrome Allen
31-4039 Allen Type Chrome Allen
31-4039 31-2111 Stainless Type Stainless Hex Nut
31-0225 31-0225 Replica 1948-64 Stainless Hex Bolt
31-0834 Replica 1948-53 Stainless Hex Bolt
Replica Finned Exhaust Clamp
fits Panhead 1948-65. Replacing
31-0834 factory accessory 65519-48.
Installed VT No. 31-0425
31-0834
1966-69 Shovelhead Exhaust

Chrome Flex Exhaust
Covers for all Big Twin 74 29-0153
and 80, 1¾”. Slides on.
VT No. Type
29-0152
30-0110 MCM
30-0311 Replica
30-0110
31-9005
Two Into One Exhaust for rigid or swing arm frames on 1966-
31-9002 31-0229 69. It is a three piece set incorporating the Y-flat pipe combi-
nation.
Chrome Black
29-0152 29-0153
Note: Three and four Piece Replica Exhaust Systems require hand fitting during
31-3989 31-2143 final assembly. We suggest to loosen motor mount bolts during installation to
Clamp Set for 2:1 single exhaust available as listed. allow pipes to adjust to motor position then re-tighten engine bolts.
Chrome Parkerized Stainless Year
31-9002 31-9005 31-2143 1958-69 30-0573
31-0229* 31-3989 — 1936-69 FL, EL two piece
30-0194
*Note: Front Clamp Set
30-0160
30-0983 30-0998
30-3178 30-3178 with over the
transmission rear pipe fits
kick start only in Rigid or
Swingarm frame
1966-69 Big Twin Drag Pipes

available to fit either mechanical
or hydraulic brakes or with over 30-0162
the trans rear pipe.
30-0159 30-0572
30-3159
VT No. Type 30-0157
30-3159 Mechanical and Hydraulic
30-3178 Over Trans
1966-69 Pipes
Chrome Black Type
30-0194 30-0573 Combo Y
30-0160 30-0998 Rear, 65493-66, 1966-69 FL
30-0983 30-0998 Rear, 65493-66, 1966-69 FLH
30-0157 — Rear Dual
30-0159 30-0572 Front 65443-66, Header Pipe
30-0162 — Crossover
650
1948-65 Panhead Exhaust
Chrome Flex Exhaust 29-0178
Covers for all Big Twin 29-0173 Installed
30-0110 1936-69, 1¾”. Slides on. Installed
VT No. Type
30-0110 MCM
30-0311 Replica
29-0823
31-3951
31-4187 31-2126
31-2127 Two Into One Exhaust designed to replace stock style with
31-9005 1³⁄₄” outside diameter pipe systems. Fit rigid or swing arm
frames. Systems are four piece construction. 1965 only are
original three piece design.
31-9002 VT No. Years Finish
CLASSIC
29-0173* 1948-57 Chrome
31-2143 29-0174* 1958-64 Chrome
30-0802** 1948-57 Black Kit, 4 Piece
29-0823 1958-64 Black, 4 Piece Set
31-0225 31-0229 29-0178* 1948-57 Black
30-0819 1948-57 Chrome 30-0802
31-1264 31-1271
29-0154 1965 Pan, Chrome
29-0155 1965 Pan, Black
*Note: Features replica style saddle Y and riveted flat pipe.
31-1269
**Note: Kit includes black exhaust, chrome flex tube cover set,
parkerized clamp set and stainless replica header clamp set.
30-0975
31-0031 31-0030 31-0069 Best Made!
Clamp Set for 2:1 Single Exhaust available as listed. Order
exhaust separately, order header clamps in stainless, VT No.
31-0225 in stainless to complete set. 30-0864
Chrome Parkerized Stainless Year
— 31-4187 — 1941-57 (3 Piece) 30-0746 30-0981
31-3951 31-2126 — 1941-57 OHV
— — 31-2127 1950-57 30-0547
31-9002 31-9005 31-2143 1958-69
— — 31-0225 1948-65 30-0200 30-0975
31-0229* 31-3989* — 1936-69 FL, EL 2-piece
— 31-1264 31-1269 1950-57 Rear Replica Header Pipes.
— — 31-1271 1941-57 End Chrome Black Type Year 30-0562
2719-22 2772-22 — 1941-57, Bolt Kit 30-0746 30-0981 Flat 1948-64
31-0031 31-0030 31-0069 1941-57 30-0864 30-0200 Y Pipe 1948-57
*Note: Front Clamp Set 30-0975 Y Pipe 1948-57
30-0863 Y Pipe 1941-57, 16¹⁄₂" length
1941-49 Muffler
30-0881
30-0898
Raw Finish
1948-57 (1.2mm thick)
30-0547 30-0562 Front Pipe 1948-65

30-0561 30-0749 Rear Pipe 1948-65
30-0880 30-0570 Megaphone
30-0017 1941-52
Drag Pipe
The 30-0880 & 30-0884 have the original seam type construction.
FL Stock Replacement
Muffler replaces 65251-41. 30-3128
Drag Pipes have less ground
Fits all 1941-49 FL, EL, UL. clearance than original equip-
30-0880 VT No. Finish ment. Requires the use of
30-0163 Black P-Clamps.
30-0164 Chrome
VT No. Style
30-0164 30-3128 1¾” Goose Drag
30-0884 Chrome, Replica
651
Cigar Muffler
30-0564
30-0877 Detail Muffler/Trumpet Set for

1958-84 FLH.
VT No. Type
30-0564 Dual
30-0441 30-0441 Single
30-0189
30-0877
Stamped OEM
30-0876 Detail
30-0189 Installed
Show Quality for

Restoration!
30-0189 Installed
Original Seam Type

Construction 30-0220
30-0876
30-0143
30-0282
Formed 30-0852
Ends 30-0398
30-0877, 30-0876, 30-0398 feature original seam type construction.
Cigar Mufflers replace 1950-66 FL-FLH, 1¾” inlet, 3¹⁄₄” body
diameter. Kit includes two mufflers and clamps. *Note: Not seam-
less.
VT No. OEM Fits Length Brand
30-0877* Chrome 1950-57 24” Replica
30-0876* Black 1950-57 24” Replica
30-0143 65235-50 1950-57 24” V-Twin
30-0852 Black 1950-57 24” V-Twin
30-3189 Chrome Kit Pair
30-0189 65235-50 1950-57 24” DCC
30-0220 65236-58 1958-66 22” DCC
30-0282 65236-58 1958-66 22” V-Twin
30-3189 30-0398* 65236-58 1958-66 22” Replica
652
30-0141
Replica Muffler
30-0142
30-3186
30-0218
1970-84 FLH Replica Mufflers
30-0142
30-3176
30-0218
CLASSIC
30-0346
1970-84 FLH Replica Chrome Mufflers. Kit include two muf-
flers and four clamps. *Note: Not seamless.
VT No. Item U/M Measurements
30-3176 Muffler Each 28” long
30-3188 Muffler Kit Pair
30-0346* Muffler Each 27¹⁄₂” long, 3¹⁄₂” outside diameter
31-2103 31-4016
30-3187
31-2109
V-TwinTM Replica Chrome Seamless Muffler features classic
fishtail or turnout ends with factory duplicated stock seams and Clamp
welding for restoration or nostalgic looks with a 3¼” outside 31-4016 65293-58 3¹⁄₄” Stainless Clamp Each
31-2103 End Clamp 1⁷⁄₈” Chrome Pair
diameter. All fit 1¾” inlet, single and dual applications. Pairs
31-2109 Body Clamp 3¹⁄₄” Chrome Pair
include two mufflers and four clamps.
VT No. Length Type U/M
30-0141 26¾” Fishtail Each 31-2117 31-2118
30-3186 26¾” Fishtail Pair Black FL Muffler Support Tubes use on 1958-84 FL.
30-0142 33” Fishtail Each Replaces 65318-58A right side and 65318-59B left side.
30-0218 28” Turnout Each VT No. Side
30-3187 28” Turnout Pair 31-2117 Right
Note: VT No. 30-0141 stock FLH 1958-66, VT No. 30-0218 31-2118 Left
stock on 1967-69, VT No. 30-0142 clears saddlebags. 31-4016 31-2109 31-2103 31-2144
3¹⁄₄” Stainless Clamp replaces 65293-58, fits cigar and other

stock dimension mufflers, sold each.
VT No. 31-4016 Polished
Inlet and Body Clamps for mufflers on this page.
VT No. Type
31-2109 3¹⁄₄” Body, pair
31-2103 End Clamps, pair
31-2144 End Clamps, Heavy 31-9920
31-9920 1⁷/₈” End Clamps, chrome
31-0820 1⁷/₈” End Clamp Kit, parkerized
Chrome Muffler with Megaphone Tip includes one mega-
phone tip with heavy duty 1⁷/₈” clamp installed.
VT No. 30-0584
V-Twin Mfg. Purchased Superior Muffler Company, tooling

and inventory from Harry Denune in 1991 of Dixie Dist. Co.
which closed in 2016.
653
Fishtail Exhaust 30-0264
30-0872
Chrome Tapered Fishtail Muffler features 1¾” inlet.

Use 2½” body clamps for mounting which are sold separately.
VT No. Item U/M
Rocket Fishtail Kit for FLH includes two cigar mufflers and 30-0253 Muffler 27” Long Each
three tip fishtail tips. 30-0264 As Above Pair
VT No. 30-0872 30-0254 Muffler 31” Long Each
31-2103 Inlet Clamps, pair
30-0999
30-0151
30-0955
30-3185
30-0495 January 2017 first use of

term "Bronx"©. 30-0152
A-Chrome Fishtail Style Mufflers are 2⁷⁄₈” diameter, with steel baf-
fle core. Inlet end fits 1¾” O. D. pipes. Order clamps separately.
VT No. Type 30-0152 36”, each
30-0151 30”, each 31-2103 1⁷⁄₈” end clamp
30-3185 30” Set includes 31-2099 clamp
31-2099 2⁷⁄₈” Body Clamp
30-0495
31-2107 31-2103 31-2144

Tail Set.
VT No. Type I.D. O.D. U/M Order muffler clamps separately.
30-0955 3-Fin 1⁷⁄₈” 2” Pair, Tail Only VT No. Type Size Type
30-0999 Bronx 1⁷⁄₈” Each, Tail Only 31-2107 Body 2³⁄₄” Standard
30-0495 Bronx 1³⁄₄” Each, Tail and Pipe 31-2103 Inlet 1⁷⁄₈” Standard
30-1433 Flame 1³⁄₄” 1⁷⁄₈” Pair 31-2144 Inlet 1⁷⁄₈” Heavy
30-0140 Chrome Muffler End Clamp fits slip on mufflers.

VT No. 31-1007
Batique Pipe End fits over exhaust tube

as noted. Sold each.
30-0399 VT No. Fits Over Finish
30-0793 1³⁄₄” Chrome
30-1376 1³⁄₄” Black
30-1393 1⁷⁄₈” Chrome
Chrome Flash Gordon Fishtail Muffler with 2.5” diameter to
30-1388 1⁷⁄₈” Black
fit 1³⁄₄” pipes. Sold each.
VT No. Item Length
30-0140 Muffler 31.5”
30-0399 Muffler 24”
31-2106 Body Clamp
654
30-0817
Straight Pipes
V-Twin Mfg.TM Fishtail Kits include
two (2) fishtails, two (2) inlet and
two (2) body clamps. Pipes are 1¾”
inside diameter the full length to fit
30-3165 over drag or dual exhaust systems.
Fishtails do not include baffles.
VT No. Length
30-3165 30”
30-0137 36”
30-0138 30-0139
CLASSIC
30-0959
30-0318
30-0136 30-0518
42"
30-0893
Straight Fishtail Extensions with scalloped fishtail tip. 30-1287

Chrome Black Length Body Diameter U/M
30-0817 30-0818 29¹⁄₂” 1⁷⁄₈” Set Fishtail Straight Pipes fit over 1¾” pipes. Sold each except
30-0893 32” 1⁷⁄₈” Set where noted. Order clamps separately. Available in chrome or
black finish.
Chrome Black Item Body Dia. U/M
30-0602 30-0138 — 18” Fishtail 1⁷⁄₈” Each
30-0945 — 18” Fishtail 1⁷⁄₈” Set
30-0139 — 30” Fishtail 1⁷⁄₈” Each
30” Straight Pipe Extension is 1⁷⁄₈” inside diameter to fit over 30-0948 — 30” Fishtail 1⁷⁄₈” Set
1³⁄₄” pipes and allows extension to slide over to desired length. 30-0136 — 36” Fishtail 1⁷⁄₈” Each
Pair. 30-0950 30-0959 36” Fishtail 1⁷⁄₈” Set
VT No. 30-0314 30-0518 — 36” Fishtail 1⁷⁄₈” Set
30-1287 — 42” Fishtail 1⁷⁄₈” Set
31-2105 — 1⁷⁄₈” Hanger Clamps Set
31-2101 — 1³⁄₄” Hanger Clamps Set
30-0974 31-2103 — 1⁷⁄₈” End Clamps Set
Chrome 15¹⁄₄” Muffler Tip Set

30-3421 has a 1⁷⁄₈” inlet to fit over OE style
30-0974 Shown on Knucklehead Bobber cigar mufflers. Megaphone sold as
Chrome Classic Fishtail Tips slip over the a pair. VT No. 30-0984
outlet of the muffler or straight pipe. Tip mea-
sures 7¹⁄₈” long and 5⁵⁄₈” high. Sold as pair.
VT No. I.D. 30-0984
30-0974 1³⁄₄”
30-3421 1³⁄₄”
30-3422 1⁷⁄₈”
655
Muffler 30-0150
30-1343
Installed
30-1343
Installed 30-0067 30-0871
30-0296
30-0794
30-1343 30-1344
Bobber Style Muffler. 30-0827 30-0848

VT No. Finish Type
30-1342 Raw Megaphone
30-1343 Chrome Megaphone
30-1344 Raw Straight Without Megaphone
30-1026
30-1025
Megaphone Pipe with an overall length of 15". Includes 1⁷⁄₈” 30-2105
end clamp and 6" mounting strap. Megaphone end is 3³⁄₄” in
diameter. Straight thru pipe with no baffle. Fits over 1³⁄₄” pipes.
Chrome Black
30-1025 30-1026
Exhaust Tip Set with
slight turn out ends
for a clean look. Can
be baffled to act as a
short muffler. Sold as
a pair. *Note: Must 30-1375
order end clamps
separately.
Chrome Black
30-0672 30-0673
30-0672
Slip On Chrome Mufflers steel baffled with 1³⁄₄” inlet.
30-0073 Removable
VT No. Type Length Dia. Mt Type U/M Baffle
30-0150* Shorty 12” 2¹⁄₄” Stud Each Yes
30-0067 Trumpet 16” Each Yes
30-0073 30-0871 Vape 13” 1³⁄₄” Each
30-0296 Megaphone 20” 2⁷⁄₈” Each Yes
Grenade Muffler features a inner diameter inlet with a chrome 30-0794 Megaphone 20” 1³⁄₄” Pair Yes
or black finish. Has a channel mount to accept "T" bolts for 30-0827 Megaphone 1³⁄₄” Pair
mounting. Sold as a pair. Order bolt set separately. 30-0848 Megaphone Upsweep 1³⁄₄” Pair
Chrome Black I.D. 30-2105 Megaphone Upsweep Channel Pair Yes
30-0073 30-0068 1.75 30-2167 Mega Upsweep 20” W/Flap Yes
30-0672 30-0673 1.75 30-1375 Mega Upsweep Stud Pair Yes
30-1269 30-1367 2.25 *Note: Fits 1³⁄₄” or 1¹⁄₂” diameter.
656
Universal Muffler
Universal Mufflers fit over 1³⁄₄” pipes and use clamps for
mounting. All clamps available separately.
Replica Tapered Muffler Set replaces 65231-65A with 1³⁄₄” inlet.

30-0625
VT No. 30-0795
30-0148 Turnout Muffler Set has 1³⁄₄” inner diameter inlet. Order
clamps separate. Channel type mounting features concealed
track on back with 2¹⁄₂” body diameter.
20” 16” U/M
30-0625 30-0784 Pair
30-0146 30-0771 Each
CLASSIC
30-0207
30-0348 30-1563
2:1 Collector has 1³⁄₄” inlet 3” diameter, 29” long, fits most par-
allel exit pipes. End may be rotated to position.
VT No. Type
30-0207 Turnout
30-1563 Slash End
VT No. Type Length
30-0207 Turnout 29”
30-1563 Slash 21”
30-0190
30-0147
Slip On Chrome Mufflers steel baffled with 1³⁄₄” inlet.

Removable
VT No. Type Length Dia. Mt Type U/M Baffle
30-0148 Tapered 16¹⁄₂” 2¹⁄₄” Channel Pair No
30-0641 Tapered, Black 16¹⁄₂” 1³⁄₄” Pair
30-0642 Tapered, Chrome 16¹⁄₂” 1³⁄₄” Pair 30-0191
30-0147 Baloney Slice 16¹⁄₂” 2¹⁄₂” Stud Each Yes
30-0348 Baloney Slice 16¹⁄₂” 2¹⁄₂” Channel Pair Yes 31-2108 31-2103 31-1007
30-0438 As Above, Black 16⁹⁄₁₆” 2¹⁄₂” Channel Pair Yes
Chrome Turn Out Mufflers have a 3” diameter body, 1³⁄₄” inner

diameter inlet, 30” or 36” overall length. Order clamps separate-
ly. Great for single or dual exhaust use on FLH models. Will not
fit 1985-94 FLT models. 30-0190 has mount track on back.
Upsweep Muffler is 31” long with upsweep tail.
VT No. Size U/M
VT No. U/M
30-0190 30” Pair
30-3391 Each
30-0191 36” Each
30-0565 Pair
30-0382 36” Pair
31-2108 3” Body Clamp Pair
31-2103 1⁷⁄₈” End Clamp Pair
31-1007 1⁷⁄₈” End Clamp Pair
657
Heat Shield 1970-84 FLH Heat
Shield Set includes
5 pieces, 2 for the
1970-84 FLH 3 Piece
Chrome Heat shield Set left and 3 for the
for 2:1 exhaust system. right side to fit dual
VT No. 30-0333 cross over sys-
tems.
VT No. 30-0350
Left Side Cross Over Heat Shield fits

A B
C 1948-64 Paugcho left side pipe and stock
1961-64 cross over. VT No. 30-0083
30-1562 E
Chrome Heat Shields fit 1970-84 FLH

models, not FLT.
Worm clamps included.
VT No. # Item
30-0111 A Front 26”
30-0287 A Front 24” 30-0488
30-0112 B Rear
30-0288 B Rear VT No. 30-0118 Installed
30-0488 Rear, 2:1 exhaust systems
30-0208 C Lower Y, 8”
30-1562 Lower Y, 14”
30-0211** E Left, Top **Note: 1965-84 FLH
30-3220 F Left, Vertical
*Note: Notch for rear pipe fits other 2:1 FL style headers. Universal Heat Shields include clamps for installation.
30-0429 30-0245 VT No. # Type Dia. Length
30-0109 A Perforated 1³⁄₄” 9”
30-0221 30-0106 B Smooth 1³⁄₄” 7”
30-0117
30-0118
Replica ‘Spoon’ Heat Shield.
Chrome Parkerized Type
30-0429 5¹⁄₂” with holes
30-0221 5¹⁄₂” 30-0865 Flame
30-0834 30-0823 5¹⁄₂” OE type
2577-1 5¹⁄₂” Chrome Black Dia. Length
30-0865 4” 30-0118 1³⁄₄” 8”
30-0245 9” 30-0117 1³⁄₄” 11”
30-0465 5¹⁄₂” SS 30-0481 30-0483 1³⁄₄” 9”
30-0120 30-0834 30-0482 30-0484 1³⁄₄” 12”
30-0473 30-0479 2¹⁄₄” 9”
30-0478 30-0480 2¹⁄₄” 12”
Chrome Flex Exhaust Covers
30-0123 30-0121 for all Big Twin 74 and 80, 1³⁄₄”.
Slides on.
VT No. Type
30-0110 MCM
30-0311 Replica
Universal Straight Heat Shields are available for 13/4” or 21/4”
pipes. Includes mounting clamps. Sold individually.
For 21/4” Pipes For 13/4” Pipes
30-0120 4” 30-0122 10”
30-0121 10” 30-0123 12”
30-0124 18”
30-0256 SS Clamp
658
Exhaust Brackets are 1” wide x ¹⁄₈” thick for
mounting goodies, pairs.
VT No. Type
Exhaust Clamp
Exhaust Mount Clamps (2” and under).
31-9973 31-9972 4³⁄₄” Long VT No. I.D. Size Style Length
31-9973 L Bend 1” x 3³⁄₄” 31-3947 1” “P” shape Long Hanger Clamp
31-2100 1¹⁄₂” Hanger Long
31-2115
Offset Chrome Exhaust Strap Bracket is 2” 31-2101 1³⁄₄” Hanger Long
between 3/8" holes and is constructed from 1/8” 31-2146 1³⁄₄” “P” shape Short
steel. VT No. 31-2115 31-1011 1³⁄₄” “P” shape Long
31-0816 1⁷⁄₈” “P” shape Short
Universal Chrome Straps are 31-2105 1⁷⁄₈” Hanger Long
31-2134
sold in pairs. 31-2102 2” “P” shape Short P Clamp
VT No. Length Muffler Mount Clamps
31-2133 3” VT No. I.D. Size Style Length
31-2134 6” 31-2120 2¹⁄₂” Hanger Long
31-2135 8” 31-2106 2¹⁄₂” “P” shape Short
31-2119 2¹⁄₄” “P” shape Short
31-0273 31-2131 31-2108 3” Hanger Short
31-1977 3¹⁄₂” Hanger Short
31-2107 2³⁄₄” Hanger Short
CLASSIC
Chrome Pipe Clamp with angle.
VT No. 31-2104 31-0270
Frame Mounting Clamp is 1” clamp for mounting exhaust pipes
Chrome Muffler End Clamps. 1⁵⁄₈” for use
or footpegs. Sold in pairs. Order bolts and nuts separately. when attaching muffler to 1¹⁄₂” tubing.
VT No. Finish VT No. I.D. Size
31-2131 Chrome 31-0270 1⁵⁄₈”
31-0273 Black, P-Type Clamp 31-2132 1³⁄₄”
31-2103 1⁷⁄₈” 31-2103
Chrome Frame 1” Clamp to fit frame for
exhaust bracket mounting, each. 31-2144 1⁷⁄₈” Heavy
VT No. 30-0094 31-1007 1⁷⁄₈” Super
31-1322 1⁷⁄₈” Parkerized
31-9920 1⁷⁄₈”, Chrome
T-Bolt Set is a replacement for all of 31-0821 Parkerized 31-1322 31-2144
31-2116
our muffler pipes which have channel 31-9914 2”
type mounting. Supplied with nut. 31-9948 2¹⁄₈”, Wide
VT No. U/M 31-0283 2¹⁄₄” Narrow
31-2116 Pair 31-2099 2⁷⁄₈”
31-0223 10 pack 31-2141 3”
31-1977 3¹⁄₂” 31-9920 31-1007
31-2109 3¹⁄₄”
31-4016* 3¹⁄₄”
31-1012 3¹⁄₂”
37-8683 Bolt Set
*Note: Stainless steel sold each
Baffle Set Pipe Baffles are

Pipe
30-0351 measured for O.D.
O.D.
to fit I.D. of Pipe.
30-1407
Best!
30-1411
Length
8” 8.25” 8.5” 9¹⁄₂” 10" 10¹⁄₂” O.D.
30-1307
30-1604
30-1419 1³⁄₈”
Baffle 30-1405 1⁵⁄₈”
30-1416 30-1410 30-1407 30-1411 1⁷⁄₈”
30-1434 2” 9.5” Long Steel Pipe Baffles will
30-1417 30-1414 30-1406 2¹⁄₈” fit into straight pipes with an outer
30-1418 30-0351 2¹⁄₄” diameter of 1³⁄₄”. Sold in a quan-
2¹⁄₄” tity of 2.
30-1415 2⁷⁄₈” VT No. 30-1307
659
Exhaust Baffle A
B 30-0372 Pipe Baffles fit
inside straight
pipes, sold in pairs.
30-3181 C Note: Baffle size
30-0102 30-0217
denotes size of
pipe into which it
fits.
30-3180
30-0101 30-0103 30-0217
Blunder Buss Pipe Baffle is full 12” long steel, pair. Note:
Baffle size denotes size of pipe into which it fits. VT No. # Size Length
VT No. Size Length 30-0101 A 1¹⁄₂” 4”
30-3180 1³⁄₄” 12” long 30-0102 A 1³⁄₄” 4”
30-3181 2” 12” long 30-0103 A 2” 4”
30-1405 1³⁄₄” Baffles are 8” 30-0216 B 1³⁄₄” 8”
30-1407 2” Baffles are 10” 30-0217 B 2” 8”
30-1405 2¹⁄₄” Baffles are 8” 30-0372 C 2¹⁄₄” 4.5”
1966-84 Exhaust Gasket

Allen Bolt Exhaust Chrome Sharks
Stud Kit includes two Teeth cover
allen bolts, gaskets exhaust flange on
and allen wrench. 1966-84 Shovel Pan Shovel
VT No. 37-7275 to dress up and
reduce heat build Exhaust Port Replacement Service.
Exhaust Stud Nut and up. Fits 13/4” pipes, Available for both Pan and Shovelhead
Gasket Kit for 74” and 80” sold in pairs. applications. Ship in old disassembled
prevents thread stripping in VT No. 42-0024 cylinder heads and the broken or stripped
head using permanent studs. exhaust ports will be replaced with new
Exhaust Flange Mount Bolt.
Includes two studs, two sure factory style exhaust ports. Service
Allen type replace 3201W on
seal flange gaskets, two includes ports as shown.
1966-84 Shovelheads, 10 pack,
chrome nugget nuts and lock washers. VT No. Replacement Service
black. VT No. 37-8854
VT No. Type 60-0162 Panhead
15-0615 1966-up Shovelhead 60-0163 Shovelhead
15-0195 Gaskets only, 10 pack
Exhaust Port Lock Kits. Special bolt

and lock tabs secure pipes for good. Fits 30-0098 30-2104
1966-84 Shovelhead. Order 15-0195
separately.
VT No. 37-8255
15-1541 “Fire-ring”
31-2123 30-0105
Steel Core Exhaust Gasket fits 1966-83 Exhaust Gaskets
Shovelhead, 10 pack. features a com- Exhaust Repair Ports. Aluminum cast-
VT No. Type Brand pressed outer ings to be welded on broken or damaged
15-1074 Steel Case James portion and brass heads. Pipe flange is steel and is to repair
15-1541 Steel Case GB inner for max- Shovel pipe flanges, pairs.
15-1098 Donut James imum sealing VT No. Years Models
15-1237 Knitted James power. Gasket area keeps exhaust gases 30-0098 1948-65 Panhead
from escaping and the brass ring ensures 30-2104 As Above Motor Shop
a good seal between exhaust pipe and cyl- 30-0105 1966-84 Shovelhead
inder head. 1966-84 Shovel Big Twin. 31-2123* 1966-83 Shovelhead
VT No. Type Qty *Note: To repair pipe ends.
15-0195 GB 10 Copper-Clad
15-0196 GB 50 Exhaust Gaskets
15-1073 James 10 for Shovelhead are
heat proof material
James Shovelhead sandwiched between
Shovelhead Exhaust Port Flange Exhaust Kit
Gasket stock style replaces 65834-68. two sheets of copper,
includes four studs, the ultimate sealing.
VT No. 15-0191 two fire ring gaskets, Copper donuts are
and two chrome compressible for better
nuggets. sealing on uneven pipe flanges.
VT No. 15-1075 VT No. Type Qty
15-0197 Copper Clad 10
Steel Core Exhaust Gasket. 15-0198 Copper Clad 50
Exhaust Port Stud, Nut and Gasket Kit 15-0660 Copper Donuts 10
VT No. 15-0889
VT No. 15-0450 15-0759 Copper Gasket only
660
Points Covers for Big Twin use, 1970-99 with horizontal
holes.
Chrome Black Style
Ignition Points Cover
42-0748 Flame
42-0106 Live to Ride
42-0088 Live to Ride Gold Inlay
42-0035 V-Tech
42-0299 Domed
42-0662 Flat 42-0748 42-0106 42-0088
42-5522 Flame
42-0956 Smooth with Hidden Screws
42-0065 Skull with flame
42-0081 3-D Skull
42-0560 Skull
42-0162 Cross “Spins”
42-1970 Motor 42-0035 42-0299 42-0662
42-0960 Cross
42-6100 Maltese
42-1110 Perforated
CLASSIC
42-1383 42-1384 Air Flow
42-1272 FLH,1970-84, Horizontal
42-1148 42-1166 Grooved
42-0177 Baron 42-5522 42-0956 42-0065
42-1058 Milled Skull
42-0155 Smooth
42-1116 Smooth, Domed
42-1125 Perforated
42-1122 Alloy Flame
42-1095 Ball Milled
42-0581 Chrome Skull on Black 42-0162 42-0960 42-6100
42-0474 42-0475 Flame
42-0198 42-0189 Smooth
42-0465 Black Mesh Flame
42-1197 AMF FL Alloy
8764-2 Allen Screws, 1970-78
8765-2 Allen Screws, 1978-84
8402-2 Acorn Screws 42-1970 42-0081 42-1110
8492-2 Acorn Screws
16-0160
16-1731
16-0829 42-1116
42-1272
Clear Timing Plugs are available as a long optically clear type,
or a short standard version with or without the internal hex. 42-1272 Installed
VT No. Item
16-1731 Long Type
16-0829 Hex Type
16-0099 Hex Type, 10 pack
16-0160 Standard, each 42-0189 42-0475
42-0474
Clean Time pushes into timing hole and
wipes flywheel clean for strobe timing.
VT No. 16-0715
42-1197 42-0581 42-1058
16-7443 16-7444
Timing Tool. Screws into timing hole to lock flywheel for timing.
VT No. Type
16-7443 Slot
16-7444 Point
661
Ignition System Daytona Twin Tec
32-9500 Daytona Twin Tec Internal Ignition Kit
for 1984-99 Evolution Big Twin, 1970-
84 Shovelhead Big Twin and 1971-97
Sportster models. Kit includes ignition, coil
and spark plug wire set.
VT No. Item
32-3015 Kit
32-3054 As Above, ARB compliant E.O. No.
D-641- and D-641-2
32-9503 Twin Tec Internal Ignition for 1970-99 mod-
els. Two advance curve families with adjust-
able advance slope accommodate stock to
highly modified engines. It features digitally set
RPM Limit (100 RPM Steps) and selectable
single or dual fire mode. Coil outputs are pro-
tected against short circuits.
32-0588 VT No. Item
32-1005 Ignition
Volt Tech Ignition Systems fit all 1970-98 carbureted mod- 32-3053 As Above ARB E.O. No. D641-1
32-3053
els and requires sensor cup for 1982 and earlier applications. 32-2013 3 Ohm Coil Single Fire
Order tach interface, sensor cup and screw separately if
required. Note: Order Coils When Required.
VT No. Fits
Timing Plugs
32-9500 Single Fire Ignition fits Evo, Shovel and Sportster to A E
1997. It can be set for Street or Race-Electric or
Kick Starter includes rear cylinder timing adjustment C
for rate of advance. Compatible w/single fire coils.
32-9503 Single Fire Ignition Kit fits As Above B D
Includes coil and 8.5mm wires.
32-0588 8.5mm Wire Set 7106-1 A B C 9402-1
32-0469 32-0468
7500-2
8610-1 D E 8114-1
V-Tech Ignition Kits are available in dual fire where there Timing Plugs are available in stock size ⁵⁄₈ — 18 thread unless
are 2 sparks at the same time and single fire where there is noted as oversize (O.S) which is ¹¹⁄₁₆ — 16 thread.
1 spark for each cylinder when it is fired, (separate). Each kit A. Acorn style plug fits all models Big Twin models timing plug
holes and oil tanks.
includes a mechanical advance unit and all hardware. Order VT No. Type
coil separately 32-0467 coil has 2 separate coils inside to fire 7106-1 Chrome
independently. B. Acorn style plug with oversize thread and one tap for reth-
VT No. Item Type Coil reading stripped out timing hole. Fits all timing holes.
32-0468 Kit Dual Fire 32-0511 VT No. Type
7500-2 Plug and Tap (Oversize)
32-0469 Kit Single Fire 32-0467
7501-1 Plug Only (Oversize)
Single Fire: Just the spark plug for the piston that is in its compression stroke will be fired.
The other piston, being in its overlap position will not be ignited. 9407-1 ¹¹⁄₁₆”—16 Tap (Oversize)
Dual Fire: Both spark plugs are fired simultaneously at the time only one piston is in its com- C. Stock timing plug.
pression stroke.
This is the way the stock motor works on pre TC-88 motors. 8114-1 Chrome
8115-1 Cadmium
9404-1 Cadmium (Oversize)
Daytona Twin Tec External 9304-1 Chrome (Oversize)
Ignition Kit for 1970-84 FL and 9714-1 Parkerized (Oversize)
1971-84 FX models. Dual fire elec- 9502-1 Chrome 1939-51
tronic ignition system which includes 9504-1 Parkerized as above, ⁷⁄₈” Hex
9503-1 As above cadmium
trigger rotor for mechanical advance D. Functional and custom design plug fits all Big Twin models
mechanism. Features a digital set and Sportster timing plug holes and oil tanks.
RPM limiter in 200 RPM steps from 8610-1 Chrome
5,200 to 7,000, status LED for stat- 8611-1 Cadmium
ic timing, electronic dwell for maximum ignition energy at high E. Allen style plug use on all 1970-84 replaces 720.
9402-1 Chrome
RPM, reduced current draw at low RPM, and a simple two wire 9403-1 Cadmium
hook up. Reliable starting in all conditions by operating down to 37-9206 Chrome by Gardner-Wescott
below 6 volts, and is rated to operate at 260°F. VT No. 32-1036 9960-1 Chrome (Oversize)
Crane Hi-4 Replacement Rotors.
662 VT No. 32-9292
32-7773 32-0136 32-0150
Ignition Advance
Blue Streak Sifton “Tune-able” Ignition
Advance Assembly includes stainless advance
Points Conversion Kit. Both brands include everything necessary for base, points plate with “Blue Streak” points
direct replacement on 1970-78 Big Twin, 1971-78 Sportsters or for con- and condenser with hardware and 3 pairs of
verting late model electronic-type back to points. Accel type available color coated springs which allow full advance at
with mircochip points, which will require a domed shaped points cover 1400, 2000 and 2600 RPM depending on which
such as VT No. 42-0299 to accommodate taller points. The V-Twin unit spring is selected.
includes stock style points and condenser and is available with stock VT No. 32-0713
needle bearing weights. 32-0549 32-0042 37-8809
VT No. Item Type
32-7773 Accel with Microchip Stock
32-0136 V-Twin with Points Stock
32-0150 V-Twin/Points Needle
Points Plate Screws. Points Plate Assembly available as stock point and condenser
VT No. Year Type replacement fits for 1970-78.
32-0049 1982-99 Steel VT No. OEM Item
32-0760 1982-99 Stainless 32-0549 32577-70 Point Plate Assembly
32-0051 1970-81 Steel 32-0042 32618-70A Mount Plate Only
2743-2 1982-up Oversize 37-8809 1047 Point Mount Plate Screws
CLASSIC
7115, 6189W with washer assortment
Stainless Advance Unit features stainless base,
32-9220 heat treated weights and cam center screw for
1970-up mechanical advance ignition.
32-9261 VT No. 32-0178
Tune-able Advance Unit features stainless base, heat treated weights cam
bolt and 3 different color coded spring sets which allows full advance at 1400,
2000, and 2600 RPM depending on which springs are selected. Can be used
with all ignitions, points, single or dual fire types which utilize an advance unit.
Springs also available separately.
VT No. Type 32-0168 32-0055
32-7510
32-9220 Stock
32-9261 Needle Bearing
Advance Units feature heat treated weights and steelbase for
13-0121 Stock Springs, Black 32-7510.
13-9246 Heavy VT No. Type Finish
13-9247 Severe 32-7510 Advance Steel
Competition Advance Unit features machined stainless 32-0168 Advance Stainless without bolt
steel shaft and plate, metallic coated weights and special 32-0055 Center bolt Steel
wound springs for exact advance. Replaces 32505-78A 32-5119 Mallory Unilite Breakerless Ignition
for 1970-up, mechanical advance applications. Center System for 1970-99 all Twins. Dual fire
screw included. By Rivera. Unilite module features integrated photo
VT No. 32-9037 coupler, signal processor and power
32-0140 Automatic Advance switch. Requires mechanical advance
Rebuild Kit includes two assembly and ignition coil with 3.0 to 4.0
springs, two weights, and ohms. VT No. 32-5119
roll pins. For all 1970-78
Twins.
VT No. 32-0140
13-0121
13-9247 13-9246
1970-78 Advance Weight Springs.
VT No. Fits
13-9247 Severe Duty Advance Weight Springs for all Hi-compression
and heavily modified engines. Also useful for applications Advance Unit Rebuild Parts.
experiencing detonation (pinging) or very erratic idle, pair VT No. OEM # Item
32-7510 32505-78A Rotor and Weight Assembly
13-9246 Heavy Advance Weight Springs for slightly modified stock, low 12-1163 615 1 Roll Pin Breaker Plate
compression or mild stroker application, helps cure minor idle 12-1164 620 2 Roll Pin Breaker Weight
problems, pair 12-1162 623 3 Roll Pin, Breaker Plate
12-1152 8699 Pop Rivet for Cover
13-0121 Original type replacement. Uses premium 37-8809 1047,7115 4 Point Mount Plate Screws
grade spring steel, 10 pack 6189W with Washer Assortment
32-0055 3570 5 Timing Screw
Points Ignition Wire Chrome Clamps. 5 pack 32-0138 32522-70 8 Weight Set
VT No. 37-9014 32-0053 32542-70A 9 Cam only
32-0549 32577-70 10 Breaker Base Assembly
32-0051 32601-78 11 Plate Mount Stud 1970-81
32-0049 32606-82 11 Plate Mount Stud 1982-99
32-0054 As Above 11 Oversize with ¹²⁄₂₄ threads for
32-0178 Stripped out Covers
32-7504 13-0121 32605-70 12 Springs
32-0042 32618-70A 14 Mount Plate only
32-0118 32661-70 17 Point Set
Advance Unit 32-0411 32670-70 19 Terminal Kit
VT No. Item 32-0121 32726-30A 20 Condenser and Bracket
32-1316 5 pack 20 Condenser and Bracket
32-7504 Assembly w/contact point & condenser 32-1557 70456-73 21 Point Lead Wire
32-0178 Weight, spring and stainless steel shaft & plate 37-8971 10046 22 Point Lead Wire Clamp
663
Ignition Dyna ‘S’ Hi-Performance Ignition
System is self contained, fits
behind ignition cover, uses mag-
Dyna S Performance Ignition Systems.
netic rotor with the original spark
Available in dual or single fire for street
advancer, so factory advance
applications only. Each kit includes sensor
curve is maintained. Improves
plate assembly and correct coil for each
performance, extends spark plug
application. Single plug only. 1980-up appli-
life, eliminates points and condensers. Note: For dual plugged
cations require 32-7510 advance mecha-
heads, on 1980-up use advance mechanism, VT No. 32-7510.
nism.
VT No. 32-7778 (DS6-1)
VT No. # Type
Dyna ‘S’ Single Fire
32-0800 DSK-6-2 Single Fire
Ignition has the features
32-0801 SDK-6-1 Dual Fire
of the Dyna ’S’, but fires
Replacement Rotor for Dyna Ignitions.
front and rear cylinders
VT No. Fits
independently of each other
32-9300 DS-6-1
which allows accurate timing
32-9301 DS-6-2
of each cylinder. Stock ignition systems fire both cylinders at
the same time which has the wasted sparks on the exhaust
A B stroke. This eliminates this inherent problem. For use with
either dual or single plug heads. On 1980-up models, use VT
No. 32-7510 Advance assembly.
VT No. 32-7777 (DS6-2)
32-7789 32-8055 32-9152 32-9153
C
C
32-7793
32-7792
32-9151
32-7790 32-8086
32-9035 32-9155
Dyna Coils. 35,000 volt! Works with all points ignitions, after-
market or factory electronic ignitions. Note: 32-7792 is electron- 32-9120
ic, 32-7793 is for points ignition.
32-9159
32-7790 A 6V 11/2 DC-2 Angle, Dual Pair
Use 2 for dual plug heads Dyna 2000i Digital Ignition available as a module only or com-
32-7792 C 12V 3 DC-6 Stock, Dual Each plete kits that include correct coil. Features include single or dual
32-7793* C 12V 5 DC-7 Stock, Dual Each fire operation,8 advance curves, built in tach driver, adjustable
32-8055 B 12V 3 DC-3 Angle, Single Pair RPM limit from 6000 to 7500 and easy static timing with built in
32-8086 A 12V 5 DC-8 Angle, Dual Pair timing indicator. Fits all 1970-98 carbureted models and requires
32-9035 B 12V 5 DC-10-1 Angle, Single Pair 1983-up sensor cup for 1982 and earlier applications. Advanced
*Note: Use 2 for single fire ignition. Programming Software allows the mechanic or tuner the ability to
K.V. Recommends the following coils for Dyna Ignitions:
fine tune 2000I Ignition but requires adapter.
Street, Single plugs use DC-7 or DC-8 VT No. Item Plug Fire Coil
Race, Single plugs use DC-1 or DC-6
Street/Race Dual plugs use 2 DC-2 or DC-5, wired in series 32-9151 Kit Single Single DC3-1
Race, Single plugs use 2 DC-3 32-9152 Kit Dual Single DC1-1
Street, Dual plugs use 2 DC-7 or DC-8
Race, Dual plugs use 2 DC-1 or 2 DC-6
32-9153 Kit Dual Dual DC2-1
Street, Single plug uses 2 DC10-1 32-9155 Kit Single Single DC6-5
Dyna Electric Tach Adapter Kit must be 32-9159 Module Only
used with Dyna ‘S’ single fire ignition is 32-9120 Advanced Program Software for Above Ignitions
installed on any twin when electric tach is 32-9124
used. VT No. 32-7799
Dyna Ignition Booster for single point sys-
tems only transforms inconsistent electrical
surges into controlled bursts of energy to 32-9052
the coil,power is not wasted.VT No. 32-7787 32-9087
Chrome Module Covers fits 1980-99. VT No. Item
VT No. 42-0399 32-9087 Sensor Cup, 1983-94
32-9124 Sensor Cup, 1995-99
664 32-9052 Cup Screw, 10 pk
Auto Advance
Distributor
32-0546
32-8072
32-8072 Installed
Auto Advance Distributor features a chrome body and top.
These are completely assembled with gear and all internal Installed 32-0546
parts. Distributor has a two bolt mount flange to fit all 1936-64
Big Twin cases. 32-7797 42-0340
VT No. Item
CLASSIC
32-8072 Chrome, Complete Kit
32-8213 Zinc, Complete Kit
42-0340 Cover fits 32-8072 distributor
Distributor Cover includes hold down clip. Auto Advance Distributor features a
Use on 1936-64 45”, 61”, 74” 80”. Also KH. 32-7558
chrome body and top. These are com-
Chrome Cadmium Item
pletely assembled with gear and inter-
42-0301 42-0533 Kit
42-0382 Kit, Note: Stainless nal parts. VT No. 32-0546 unit uses
32-0133 32-1125 Clip stock hold down 32-0135 and fits all
32-1286 Clip/Retainer 1966-69 Big Twin Overhead Valve. The
1966-69 Big Twin Distributor Mount Clamp Kit 32-7558 type fits 1930-73 45 and UL
includes zinc plated clamp, stud, O-ring and nyloc nut. models and requires VT No. 31-3966
VT No. Item 31-3966 hold down clamp. Units require removal
32-0169 Kit of front head for installation.
12-0547 Stud only VT No. OEM Fits Type
32-0546 32502-66A 1966-69 Big Twin Complete, Chrome
32-1498
32-8217 As Above Zinc
32-7558 32506-70 1930-73 Side Valve Complete
32-1540 42-0300 32589-65 Fits 32-0546 Top Only
42-1279 Replica Top
32-0135 32516-66 1966-69 Big Twin Clamp
32-0072 13-0166 32604-64 1965-66 Spring (pair)
13-0162 32605-67 1967-69 Spring (pair)
31-3966 32515-66 1936-73 Side Valve Clamp
32-0281 — 1966-69 Big Twin Points Lead Wire
with clamp
32-0072 32-0170 32-0135
32-0072
Electronic Ignition Distributor Complete with billet chrome
body and top features electronic internals with shaft and gear
completely assembled. Fits 1936-69 Big Twin models. VT No
Order mount clamp VT No. 32-0169 mount clamp separately.
VT No. Item Accel Unilite Distributor with billet aluminum housing is a
32-1540 Distributor Kit dual fire type, includes gear and features 12 volt electronic per-
32-1498 Distributor formance. The electronic ignition module fits inside distributor,
32-0072 Distributor, Complete so no external box is required. There are no points to adjust or
42-0563 Top replace. Spark plugs can use larger gaps up to . 040. The top
12-1497 Gear Reverse can be removed without the removal of front cylinder head.
Electronic Advance Distributor VT No. Item Model Year
with rev limiting for 1936-69 Big 32-0170 Mallory Distributor Big Twin 1941-69
Twins. Features adjustable elec- 32-0135 Distributor Clamp Big Twin 1966-69
tronic advance curves, single or
dual fire modes, CNC machined
billet housing, and can be installed
without removing cylinder head.
Use with a 3 ohm coil.
VT No. 32-7803
665
1936-47 Distributor
32-0065
32-0060
32-1291
32-0065
Replica 1936-47 Complete Distributors are fully assembled
with natural alloy finish base with shaft and gear installed. Top
housing includes early point set with spring and condenser.
Stainless advance band, chrome top and clip, base retainer and 32-1333
points wire. 32-0576
VT No. Item 32-0060 Installed
32-0060 Distributor
8146-10 Mount Kit
15-1030 Gasket 32-1750
Distributor Top Rebuild Kits include points, condenser, wire,

washers, bushings, studs, and hardware. Order breaker base
32-0061 separately.
Distributor for 1936-48 45 and UL are two bolt manual VT No. Item Years
advance style featuring natural alloy finish base with shaft and 32-0065 Kit 1936-47
gear installed. Top housing includes early point set with spring 32-1291 Kit 1937-47 Base Only
and condenser. Stainless advance band, chrome top and clip, 32-1333 1937-47 Base Only, zinc
base retainer and points wire. 32-1750 1936-47 6 V Base Assy
32-0045 32-0576 Delco Condenser
VT No. Item
32-0061 Distributor Assembly, Complete 32-1638 Sifton Base
9414-8 Chrome Screw Kit Circuit Breaker Post Kits replaces fiber bushings
32-0045 Base with Gear and pin, the 1948-69 type includes pin only. Both
49-0214 Base Only include installation tool.
49-0895 VT No. Fits Wire
49-0895 OE Base Only
32-1397 Shaft Only 8848-6 1930-48 All Models 2542-10
32-0134 Retainer 8849-2 1948-69 All Models 2543-10
15-1031 Mount Gasket 13-9239 E 32666-30 Points Plate Spring Washer
15-0154 Mount Gasket 31-9904 F 56628-47 Spark Cable
Bracket, 1947-53
31-5013 G 56628-54 Horn Bracket
37-8971 H 10046 Breaker Wire Clamp
37-9154 I 56625-36 Clamp
37-9155 J 9957 Clamp
2586-1 As Above, Colony
2587-1 4726-36A Clamp
31-0276 K 9971 Wire Clamp
37-0268 L 56626-37 Timer Cable to
Frame Clamp 1937-46
31-0267 M — Timer Cable to
Frame Clamp 1947-64
Distributor Bands, Brackets and Relay Mount.
37-9028 M 56609-52 As Above, 1952-65
45+ OHV # OEM Item
49-0361 N 32716-36 Band Screw
49-0072 49-0072 A 32710-36 Band Kit, All
32-1189 1634-36 Stud
49-0060 B 32736-37 Bracket 45 SV
32-1750 1936-47 6 Volt Top Assy
49-2010 B 32735-37 Bracket 74 & 80
32-1337 1936-52 Loom Clip
49-0216 C 74765-36 Relay Mt 1936-46
32-1162 Gear Pin
49-2534 D 74765-47 Relay Mt 1947-64
32-1384 Retaining Ring and Clip
32-1324 Relay Mt 1936-37
32-1337 Loom Clip
666
32-0039 1948-60 Distributor
32-0039
32-1328
CLASSIC
32-0038
32-1328
1948-69 Single Point Distributors are two bolt manual
advanced style featuring natural alloy finish base with shaft and
gear installed. Top housing includes 1948-69 type single points, 32-1312
condenser, adjuster plate, chrome top, clip, base retainer and
points wire.
VT No. Fits
32-0039 1948-64 45’s and UL
32-0038 1947-64 Big Twin
15-0153 Base Gasket
Thrust Washer Timer Shaft for 1948-64, 5 pack. 32-0047
VT No. OEM Width Single Point Distributor Parts for 1949-60 BT
10-1269 32535-48 .062”
manual advance models.
10-1270 32535-48 .066”
10-1272 32538-48 .076” 10-1269 VT No. OEM Item
32-1328 6 Volt Distributor Top
Circuit Breaker Post Kit replaces fiber bushings
37-9235 30507-47A Eccentric Screw 32-9265
and pin, the 1948-69 type includes pin only. Include
8146-10 3779, 7035 Circuit Breaker Screws Cad
installation tool.
8145-10 3779, 7035 Circuit Breaker Screws Chrome
VT No. Fits Wire
10-0717 32525-36A Bushing
8849-2 1948-69 All Models 2543-10
32-0198 32531-36 Timer Gear
32-0029 215 Gear Pin, 1940-65 32-0198
32-0047 32579-49 Breaker Base Only
32-0134 32585-36 Base Retainer
32-1455 Shaft and Gear
8146-10 8145-10 32-0044 Retaining Ring and Clip Kit
32-1286 Retaining Ring and Clip Kit, cad
Circuit Breaker Screws to mount distributors and relay on
32-0046 32593-47 Adjuster Screw
1936-64, 61, 74 and 80 models, 10 piece.
2632-3 As Above Colony 32-1286
VT No. Finish
8146-10 Cadmium Kit 32594-47 and Plate Kit
8145-10 Chrome 32-0154 32676-49 Wire Stud
9684-10 Parkerized 32-9265 32690-30 Distributor to Coil Wire
32-9340 32690-30 Distributor to Coil Wire, OE
32-1428* 1948-60 Base Only
32-0047 32879-49 1948-60 Base Only 32-0068
32-1312 1948-60 Base Assembly
32-0068 Kit 1948-60
32-1636 1948-60 Distributor, Sifton
32-1337 Distributor Wire Loom Clips
*Note: For use with late 1970-78 one piece type points.
667
Tune Up Components
32-0106 Accel Performance Ignition Tune-Up Kit 32-0156 Blue Streak Premium Parts
includes matched crown contact points, con- for 1970-78 Twins.
densers, gap settings and point cam lube. VT No. Item
Spark plugs not included. Blister packed for 32-0156 Points
display. Fits 1970-74 FX-FL, 1975-78 FX-FL. 32-0157 32-0157 Condenser
VT No. 32-0106 32-0118
32-0117
Ignition Condenser and Bracket replaces 32726-

30A. Fits 1948-Early78 FL, FLH, FX.
VT No. 32-0121
Point Sets.
Platinum Premium Points Set fits VT No. Year/Model
1970-E78 BT. 32-0117 1948-69 FL, FLH,each
VT No. 32-1383 32-0118 1970-E78 FL, FLH, each
1936-47
D
32-1113 A
B
C
32-0113 32-0543
32-1145 32-1114
32-0120 32-0123 32-0576

32-1117 32-1115
32-1762
13-9171 32-1287
37-0736
32-1745
13-9239
V-Twin Tune Up Kits include plugs, points and condenser. 1930-47 Points and Condenser Set includes spring.
Also available as points and condenser kit only. VT No. # Item
With Plugs Without Plugs Years Fits 32-0113 A, B, C Points, Condenser and Spring
32-1113 32-0113 1930-47 45-FL-UL (Champion) 32-0543 A, B, C Replica Kit
32-1145 — 1930-47 45 FL-UL 32-0120 A Points Only
32-1745 — As Above Globe
32-1114 32-0114 1948-69 FL 32-0123 B Condenser Only
32-1115 32-0115 1970-74 FL-FX 32-0576 B Delco Condenser
32-1117 32-0115 1975-78 FL-FX 32-1762 Condenser
32-1499 — 1936-47 EL-FL 13-9171 C Spring for Points (10 pack)
13-9239 D Spring Plate Washer for Points
37-0736 Screws for Above
32-1287 Replica Points Kit
48-1477 Delco Remy Patch
Condenser Bracket mounts two condensers
to coil mount bolts. Condenser bracket is
made of alloy material. Condensers are not
included.
VT No. 31-9905
668
32-8087 32-8089 Ignition Coil
V-Twin Replica Coils are steel jacketed, include nuts, packing
and wires. Type A replaces 31602-30 on 1930-47 and uses
kits VT No. 49-0099 on Big Twin and 49-0100 for 45 models to
clamp to frame tube. Type B replaces 37604-48 on 1948-60
and mounts to stud kits as listed.
Coil A Coil B Volt Finish Fits
32-8087 6 Black New Production
32-7588 32-8088 12 Black FL 1941-1947
32-8089 6 Chrome FL 1941-1947
32-8090 12 Chrome FL 1941-1947
32-7520 12 Chrome FL 1948-1960
32-1136 32-7523 12 Black FL 1948-1960
32-7527 As Above, NP
32-7522 6 Black FL 1948-1960
32-7588 6 Black FL 1941-1947
Over 25,000 Sold Since 1990! 32-1338 6 Black FL 1948-1960
32-8110 32-1136 6 Brass
CLASSIC
32-8112 32-1138 12 Brass
32-8089 7804-6 8823-10

Parts for 1948-66 FL Coils
VT No. # Item
32-0670 I Wire Set
7804-6 J Nuts with Packing
8823-10 K Stud Set 1948-55
8824-8 K Stud Set 1956-82
2327-23 49-0099 49-0100

Coil Mount and Parts
VT No. # OEM Item
49-0100 E Complete Kit fits 1930-52 45
Solo and Servi, includes two (2) U bolts, mount plate, two (2)
U-straps and four (4) spacers, zinc plated.
2327-23 1930-36 VL
1929-47 45
2281-18 1937-47 UL and Knucklehead
37-8838 D 31726-30 Mount Plate
37-8814 31735-29 U Bolts, pair
37-8836 31731-29 U Bolt Strap, pair
37-8816 31734-36 U-Bolts, pair
31-1548 H 31726-30 Mount Strip Set, zinc plated
31-0217 F 31726-48 Mount Plate to fit when
using early coil 48-73 frames
31-0487 G 31725-48A Bracket to mount late coil
32-0350 L 9976 Wire Clamp
37-9238 M 9970 Front Wire Clamp, OHV
2505-1 M 9970 As Above, Colony
51-0551 Frame Coil Mount Weld-On Type
31-0145
49-2532
37-9238
Spark Cable Bracket.
49-2532 32000-37 1937-63 45 Side Valve
Warranty
31-0145 32000-37A 1937-60 74 Overhead Valve Rear
All Electrical Components sold as individual pieces or in kits are covered under our warranty 37-9238 4726-36 1936-64 74 Overhead, Front
“Replacement Only” Provision. All electrical related item part numbers begin with a 32 prefix.
No credit will be issued for these items as they are exchange only.
669
Coil Cover A B 32-0190
32-7563 32-0126
6 and 12 Volt Coils. A and B include clamp bracket.
VT No. # Volt Finish Year 32-0189
42-0415 42-0417 42-0215 32-7563 A 6 Black 1936-64
32-0127 B 6 Chrome 1936-64
32-0126 B 12 Chrome 1936-64
32-0189 Wire Set All
32-0190 Nut All
42-0891 42-9948 42-5523
42-1529 Installed 31-1375

31-0127
42-1030
42-9969
Chrome Coil Covers as noted.
VT No. Style Year
42-0415 Smooth 1965-99 BT, FX and FL 31-0650 31-1978
42-0417 Louvered 1965-99 BT, FX and FL
42-0215 Finned 1965-99 BT Big Twin Coil Brackets are
42-0891 Finned 1961-64 Pan (Dual Coil) stock style mount to existing studs
42-9948 Teardrop 1965-99 for years listed. The 31-0127
42-5523 Skull 1965-99 black type includes outer strip
42-1030 Flame 1965-99 31-0551, all other numbers are
42-1529 Flame 1965- updated one piece type. Order
42-9969 Eagle Spirit 1965-99 mount studs separately, includes
C
nuts and washers.
Coil Cover, Screw and Speed Nut for 1965-77 Big
Twin. VT No. 37-7252 A
B
VT No. # OEM Finish Years
31-3970 31-0127 A 31724-65 Black 1965-77
31-1375 Black 1958-84
31-0650 31728-78 Black 1978-83
31-1978 31728-78 Chrome 1978-83
8823-10 B 72341-48 Stud Set 1948-55
31-3971 8824-8 B 72341-56A Stud Set 1956-82
31-0551 C Strap Only Black All
Dual Coil Brackets available in black steel mounts 2 Dyna 31-0422 C Strap Only Chrome All
coils VT No.’s 32-7789, 32-7790 or 32-8055.
VT No. Year Note
31-3971 1965-81 Mounts to stock coil mount holes.
31-3970 1982-85 Mounts to existing coil brackets.
31-9923
Coil Mount for Dyna ignitions, allows 2 Dyna DC-1, 2, 3, and 8
on 1965-85 FL-FX, 1984-up Softails except FLT-FXR. Made of
billet aluminum, black coated with stainless hardware. Accept
stock coil cover VT No. 42-0415. VT No. 31-9923
670
80 KV Dual Fire Coil for 1965-99
mounts to stock locations.
VT No. 32-0095
Ignition Coil
32-7572 32-7573
Black Andrews Black Dual Fire Coil

produces more voltage than stock coils.
VT No. Ohm Year
32-0709 4.8 1965-80
32-0712 2.8 1981-99
Volt Tech Molded Dual Fire Coil features black late shape
32-0709 with bobbin type windings.
VT No. Year
32-0513 32-0514 Chrome Stock 32-7572 1965-79
Style Dual Fire 32-7573 1980-82
Coils bolt to orig-
inal brackets for
exact fit.
CLASSIC
VT No. OEM Year
32-0513 31609-65A 1965-79 32-0711 32-0128 32-1268 32-0129
32-0514 31609-80 1980-83 Volt Tech Stock Replica Dual Fire Coils are factory replace-
ment quality to fit stock brackets.
VT No. Year Volt Color
32-0711 Pre1965 6V Rust
32-0128 1965-79 12V Black
32-0171 32-0172 32-1268 1965-80 12 V Red (4.8 ohm)
Blue Streak 45,000 Volt Dual Fire Coils provide more spark 32-0129 1980-83 12V Black (2.8 ohm)
and energy than stock coil and the higher voltage eliminates Note: 32-0129 for electronic ignition.
spark deterioration at peak RPM. Replica 1961-64 Big Twin 6 Volt
VT No. Years Type Ohms Dual Coil replaces 31604-61. Sold
32-0171 1980-99 Electronic 2.7 each.
32-0172 1965-79 Point 4.6 VT No. 32-0131
Warranty Single Fire: Just the spark plug for the piston that is in its compression stroke will be fired. The other piston, being in its overlap position will
All Electrical Components sold as individual pieces or in kits are covered under not be ignited.
Dual Fire: Both spark plugs are fired simultaneously at the time only one piston is in its compression stroke.
our warranty “Replacement Only” Provision. All electrical related item part num- This is the way the stock motor works on preTC-88 motors.
bers begin with a 32 prefix. No credit will be issued for these items as they are Dual Plug: Two spark plugs in each head. Total of 4 spark plugs in one engine.
exchange only.
Coil
Accel Single Fire Super Coil fea- 32-0132 32-7536
tures ultra fast coil rise time with
voltage output 45% higher than
stock & 3.0 ohms of primary resis-
tance. Mounts to stock coil bracket
32-0090 32-7802 & fits under stock coil covers. Fits
all Twins except TC-88. Accel High Energy Dual Fire Coil is a very high KV energy
VT No. Type output requires that it be used with our extreme service 8.8mm
32-0090 Yellow silicone racing wires. Each coil is complete with two 8.8mm
32-7802 Chrome wire leads and appropriate chrome brackets.
VT No. Item
32-0132 Kit 1965-87
32-7536 Wires only
32-7771 Accel H.V. Dual Fire Super Coil bolt on for
points ignition systems. High-tech molding for
1965-99 with 4.7 ohms. Yellow.
VT No. 32-7771
32-0130 32-1064
Accel Power Pulse 12V Dual Fire Coil provides longer spark
duration with a greater KV rating and faster rise time than stock
coil. Molded in epoxy. for 1965-83.
VT No. Epoxy Finish
32-0130 Yellow
32-1064 Black
671
Spark Plug Wire Set Replica Spark
Plug Cable Set
replaces 31965-30
rubber molded ends
for 1930-60 Twins.
Order coil packing,
32-0670 7804-6 nuts and washer kit
32-0670 Wire Set separately.
7804-6 Plug and Packing Kit
32-1212 32-1213 32-0813 Plug Boot Set
32-0829 Wires Only
8 mm Blue Streak XXX Silicone

Wire Sets features quality con-
struction of silicone throughout
the jacket, insulation and core.
This assures high temperature
32-1214 32-1215 resistance and high durability.
Silicone wire sets also offer max-
8 mm imum RFI suppression. Copper
core wire sets are for point type
ignition systems only and feature a copper core wire to allow
for special improved electrical conductivity and mechanical
strength. All wire sets are supplied with electrical boots and OEM
32-1217 style terminals that lock onto the spark plug.
32-1216 Copper Core Sets
VT No. Fits
32-0252 1965-78 FL/FLH/FX/FXE
VT No. XXX Silicone Sets
32-0253 Universal Application Self Make Kit
32-0254 1980-84 FLH, 85-99 FXST, 91-98 FXD
32-1218
Vintage Style Braided Silicone Spark Plug Wire, 7mm (inner
copper core). Each kit is 40” long with two 90° angle boots.
VT No. Color 32-1216 Orange/Black
32-1212 Black/Pink 32-1217 Red/Black 32-9360 32-9361
32-1213 Yellow/Blue 32-1218 Black/Black
32-1214 Green/Yellow
32-1215 Blue/Pink
32-0647 32-0648 32-0650
32-9362 32-9363
Accel Thundersport 5mm Ignition Wire features half the
diameter of stock wire and is extremely flexible. Easy to run
through cylinder heads, rocker covers and frame tubes for a
hidden look. Packaged with two 5 foot leads, coil ends and 90°
7 mm 7 mm spark plug end. Coil end must be terminated. These wires are
a 5 mm high gloss silicone wire that is rated for over
32-1123 550° F and 150 ohms per foot.
VT No. Color
32-9360 Black
32-0696 32-9361 Yellow
32-9362 Red
32-0651
32-9363 Blue
Universal Wire Sets are 40” long with double 90° spark boots. Spark Plug Wire Tool strips 7
Simply cut to the desired length and install coil terminal clips and 8 mm ignition wire, crimps
supplied. Available in copper or suppression core. spark plug and distributor termi-
VT No. Color Type nals.
32-0647 Yellow Suppression VT No. 16-0514
32-0648 Yellow Copper
32-1463 Yellow Copper V-Twin Panhead Parts Dope Reference
32-0650 Orange Copper Guide for 100% V-Twin restoration components
32-0651 Black Suppression 32-7133 and tips for 1948-65 Panhead models. 272
32-0696 Black Copper pages.
32-7133 Red Copper, 5 pack VT No. 48-1364
32-1123 Red Copper
672
32-1041 32-1042
Spark Plug Wire Set
32-7536
Sifton 8 mm Universal Wire Set feature suppression construc-

tion includes two 24" wires, coil terminal ends and coil boots.
VT No. Color
32-1041 Red
32-1042 Black
Sumax Thunder Volt 50 Black
10.4 mm Wire Sets feature a ferrite spi- 42” Accel 8.8 Wire Sets have the ends terminated with a
ral wound coated core that is 90° or a variangle boot and come with a hardware kit which
a blend of copper/nickel alloy includes terminals, boots and instructions.
bonded by a conductive acryl- VT No. Color Type
32-0031 ic latex cover. This process is 32-9248 Black Variangle Suppression
32-9250 Black 90° Suppression
CLASSIC
designed to reinforce and assist in holding core resistance to 50
ohms. The fat 10.4 mm (.409”) wires also feature three layers of 32-9252 Yellow Variangle Suppression
pure zimplex silicone, 600 degrees of heat protection, 102,000 32-9253 Yellow Variangle Copper
volts dielectric strength with a tightly woven heat treated fiber- 32-9254 Yellow 90° Suppression
glass braid and black pro boots bonded to the black with gold 32-7536 Yellow 90° Copper
lettering wires. Available in 8.2 mm or 10.4 mm.
8.2mm 10.4mm Fits
32-5202 32-0031 1971-84 FX
32-5208 32-5608 24” Universal two-piece with 90° boots 32-7231
32-5206 32-0033 1980-84 FLT-FLTC-FLHT
Sumax by Taylor Colored 8mm Plug Wires are pre-cut
32-9100 32-8043 and have the plug/coil boots and terminals already installed.
Designed for electronic ignition, but work great on point
types.
Color 1965-84 1982-94 1980-98
FX-FL FXR FLT
Red 32-7231* — 32-7233
Blue 32-7631* — —
32-0657
8.8 mm 32-0660 Black — 32-7035 32-7033
Yellow 32-7431* — —
*Note: with coil adjacent to oil tank on Dynaglide.
32-6085 32-6281
32-6081
Accel 8.8mm Custom-Fit Ignition Wire Sets are available in

300+ or custom fit.
300+ Custom Fit
Black Yellow Black Type/Fits 8 mm
32-9100 — 32-8043 Late 1978-84 FLH, 32-6481 32-6681 32-6381
Late 1978-84 FX-FXE-80,
1983-84 FXWG
32-9101 32-0653 32-8045 1965-Early 78 FL-FLH,
1971-Early 78 FX-FXE
— 32-0657 32-8049 1980-84 FLT-FLHT-FLHTC
8mm V-Twin Wire Set
— 32-0660 — 1965-83 FL-FX Universal 8mm Pro Spark Plug Kits feature 24” wire leads
with either 90° or 180° molded plug boots and straight coil
Vintage Wire Kit includes boots with brass terminals. Wires feature the Spiro-Pro design
9mm brass eyelet ends. 40” overall which provides ten times the firepower of carbon core wires
length with coil terminals and and heat protection to 600F. Works with electronic or points
boots. style ignition. All wires have a resistance factor of 350 ohm/ft.
VT No. 32-0973 Great for magnetos, distributors or dual plug heads.
90° Kits Color 90° Kits Color
32-6081 Black 32-6681 Blue
32-6281 Red 32-6381 Purple
32-6481 Yellow 32-6085 Black (180° Kit)
673
Spark Plug
Champion Spark Plug Application Chart
Engine Fits HD# Gap Copper Qty Copper Plus
Plus VT No.
Champion
Shovel 1982-83 FL-FX 5RL .040 RN13LYC 6 32-7541
1340 1980-81 FL-FX 5R6A .040 RN12YC 4 32-7540*
1984 FXE-FXWG 5RL .040 RN13LYC 6 32-7541
1978-79 FL-FX 5R6A .040 N12YC 4 32-7602
Shovel 1975-80 FL-FX 5R6A .040 RN12YC 4 32-7540*
1200 1948-74 FL-FX 3-4 .025 RJ12YC 4 32-7543
1948-74 FL-FX .025 RJ14YC 4 32-8074**
Panhead 1948-65 3 .025 J-6-C 4 32-7603
*Note: RN13LYC may also be used
**Note: One heat range hotter than stock replacement plug
V-Twin Performance Spark Plugs features a copper

core electrode for a longer service life, nickel plated
housing, 95% pure alumina insulator and a heat crimp- Accel Spark Plugs are available in U-Groove or Platinum
ing process to ensure a leak free seal. type. U-Groove features a U-shaped electrode, sintered alumi-
VT No. Mfg# Fits na insulator and a copper/nickel alloy electrode. Platinum type
32-6692 5R6A 1975-84 FL-FX features a platinum tip electrode and a pure copper center
32-6693 As Above One Heat Range Hotter electrode.
32-6694 As Above One Heat Range Colder Engine Fits Accel No. Gap Plug U-Groove
Shovel 1982-84 FL-FX 2417 .040” 997 32-0148
32-6695 3-4 1948-74 Pan/Shovelhead
SplitFire Spark Plugs incorporate a pat-
ented Split-V Electrode which creates
an aggressive flame kernel for improved
combustion efficiency. Spark plug is
for standard heat range. Fits 1948-74
Shovelhead. Autolite Platinum Plugs, sold as a pair.
VT No. 32-8923 VT No. Autolite# Fits
32-9231 AP4265DP2 1978-81 1340cc All Models
Spark Plug Indexer fits 14mm plugs
1975-80 1200cc FLH-FX-FXE-FXEF-
allows electrode to be placed for in proper
FXF
position.
32-9234 AP4275DP2 1948-74 1200cc All Models
VT No. 16-0623
32-1670 Autolite Standard Spark Plugs

VT No. Autolite# H-D# Fits
32-9296 4275 3-4 1948-74 Panhead, Shovel, 10
pack
37-8952 32-9298 4265 5RL 1975-84 Shovelhead, pair
Chrome Sparkies to fit perfectly on a spark hex for Big Twin 5R6
14mm, pair. 5A6A
VT No. Fits
37-8952 1948-1999 HeliCoil Sav-A-Thread repairs spark
32-1670 1999-2012 plug holes for 14mm short or long
Blue Lightning Bug Spark Wire Ends are reach plugs on aluminum heads.
neon gas filled, glow as strobe lights. Fit plugs Includes items pictured. No drilling
with screw terminal fittings only, pair. necessary.
VT No. 32-1552 VT No. Item U/M
16-0044 Complete Kit Kit
32-1552 16-0044 16-0043 ¹⁄₂” Insert Each
Panhead Spark Plug Set and Book Kit 16-0042 ³⁄₄” Insert Each
replaces 3-4 Harley plugs with 2 V-Twin
Manufacturing plugs for 1948-1965
Panhead and includes a Panhead parts
book. VT No. 32-1246
674
18mm Plugs
49-0796 Replica 18 mm Spark Plug Set Air
Cooled Type fits Side Valve 1936-47 and
Overhead Valve.
VT No. Item
49-0796 Plug Set
32-1398 Plug Set with 45 Book
32-0975 Installed 32-0975
32-7546
49-1325 Installed 49-0976 Kit
CLASSIC
49-0878
49-1325
18mm Spark Plug Conversion Nipples feature replica air 49-0980
cooled styling when used with standard D-16 inner plug, avail-
able separately. Pair.
VT No. Item
32-1080 Kit/Plugs/Cool
32-0975 Kits with Plugs
49-0976 Conversion Set
32-7546 D-16 Plugs (6 pack)
49-1325 Shield Set
Adapter Set allows plugs to be used in earlier 49-0880 49-1318
heads with spark plug threads. 18mm Spark Plugs.
VT No. Adapts VT No. Brand U/M
32-0057 18mm to 14mm 32-7546 Champion 6
32-0272 ⁷⁄₈” to 18mm 49-0796 Replica 2
49-0980 Globe 2
32-1080 49-0878 VL-JD 2
49-0982
49-0880 F 2
49-1318 Plug Set ⁷⁄₈” 2 (Firestone)
15-1376 Washer 5
32-1353 Nuts 2 16-1383
18mm Spark Plug Tool features a parkerized finish and is for
use with OE Harley 18mm plugs. Designed to fit within the slots
in order to disassemble the plugs.
VT No. 16-1383
Spark Plug Holder features
original Atlas design to hold
spark plugs. Bolts to replica
battery top.
49-0477 49-0448 VT No. MM
49-0624 18mm
16-0372
49-0624 installed 49-0733 14mm
49-0947 18mm Kit
Includes Beck #3 Spark Plugs
49-0176
18mm Plug Kit with tops.
VT No. Tops Top Set
32-1080 Alloy
49-0982 Alloy fins 49-0176 42-0318 42-1537
49-0477 Brass fins 32-1231 Spark Plug Holder clamps to the rear frame tube on Rigid Big
48-1642 48-1961
49-0448 Black 49-1325 Twins. Holds two spark plugs.
16-0372 Tool Beck Doering
Patch. Spark Plug VT No. Finish
VT No. VT No. 42-0318 Chrome
48-1642 48-1961 42-1537 Black
675
Electric Start Conversion Kits fit
Big Twin 4-Speed model 1965-84. 32-0005
Electric
Kits include Hitachi or Prestolite
starter, chrome battery box,
solenoid, starter housing, relay,
Start Kit related hardware and brackets.

Existing clutch drum must have
starter ring gear attached or pur-
Electric Start Kits, V-Twin
chased and installed separately.
Original Development since
Battery side cover and top strap
1978!
not included. Chrome kits include
a chrome starter motor and a
chrome solenoid.
32-0013 32-0007
Standard Chrome Type Model Year 32-1503

32-1500
32-0005 32-0013 Prestolite FLH 1965-69
32-0000 32-0007 Hitachi FXE 1971-79
32-0014 Hitachi FXE 1980-84
32-0001 32-0009 Prestolite FLH 1970-79
32-0016 32-0017 Prestolite FLH 1980-81
32-0019 Hitachi FLH (Belt) 1982-84
32-0004 32-0008 Hitachi FXB 1980-84
Starter Ring Gear for replacement on
stock clutch drums only. Fits 1965-E84
Big Twin, 66T, Weld on. Note: Bevel
edge is for welding (outside) teeth
side. 32-1503
VT No. 18-1135
Starter Cover
42-0413 42-0872 42-0992
42-0020 42-0412 42-0410
32-1503
Chrome Starter Covers. York Electric Starter Kit is complete installation kit. Fits 1941-
VT No. OEM Type Model 57 Pan and Knuckleheads. Rear fender and outer primary cov-
42-0413 31565-67 End Prestolite 1967-80 FL ers require cutting for installation of kit. 12V charging system,
Hitachi 1973-80XL coil, battery regulator and lighting is required but not included
42-0872 31524-80 End Prestolite 1981-85 FL kit.
42-0992 31535-91 End 1991-up Big Twin
42-0020 31507-87T Wrap 5-Speed 1984-88 FLT VT No. Type Year
1986-88 FXST, 83-88 FXR 32-1500 Tapered 1941-53
42-0412 31350-83T Wrap Prestolite 1966-82 FL 32-1503 Spline 1954-57
42-0410 31351-83T Wrap Hitachi short 1974-E76 XLH 32-1507 Starter Assembly
676 10-1465 Motor Sprocket Spacer 1955-69
10-1461 Motor Sprocket Spacer
32-5122 1.4 kw 32-5123
Hitachi Starter Motor Complete Hitachi Type
32-7761 32-0306
Starter Assembly avail-
able in black or chrome
32-0308 finish.
Hitachi Type High Torque

32-1634 Starter Motor features 1.4 kw Hitachi Type Starter is a replica for 1974-88 FXE, 1982-84 FL,
design that generates more 1983-88 FXR-FLT and 1984-88 FXST. Parts interchange with
power and shaft speed than orig- original, 5” overall body length.
inal type .8 kw starter. VT No. OEM Item 32-0059
VT No. Finish Brand 32-7760 31570-73 Complete, Black
32-5122 Black AB 32-7761 31570-73 Complete, Chrome
32-1634 Black VT 32-1307 31570-73 Complete, Black
32-5123 Chrome AB
CLASSIC
32-0306 31580-73 Armature
32-0307 31582-73 Brush Set
Hitachi Starter Hardware 32-0308 31579-73 Field Coils
Kit includes brushes, holder, 32-0059 31576-73 Thru Bolts
springs, thru bolts and insulator 12-0347 31583-73 Bearing, Drive End
commutator end bushing for 32-0553 Rebuild Kit
1973-88 Big Twin. Includes Brushes, Holder, Springs, Thru Bolts, Insulator, Com.
VT No. 32-0553 End Bushing
32-0553
Starter Brush Spring for Hitachi Starter Motors
1973-80.
Chrome Starter Motor Brackets. VT No. OEM Years
VT No. OEM Fits Year 13-0223 31593-73 1973-80
31-3948 31479-83 FXR 1983-89 13-9157 31557-81 1981-up, Compression
31-0233 66098-82 FLH 1982-E84
31-3948
31-0233
31-0164 31-0164 66225-73 FXE 1973-84
Prestolite Starter Motor

Black Prestolite Type High
Torque Starter Motor feature
1.4 kw design that generates
more power and shaft speed
than the original type .8 kw start-
er. 32-0289 includes housing to
32-7525 32-7524 1.4 kw mount to 1965-79 Big Twin.
Prestolite Type Starter Motor replaces Prestolite starter used
on 1966-81 FL models. Chromed unit is completely chromed. 6” VT No. Brand
32-5120 32-5120 AB
overall body length.
VT No. OEM Item Chrome Starter Motor Bracket. Replaces
32-7524 31458-66A Complete, Chrome 31476-66. Fits 1966-84 Big Twin, Prestolite.
32-7525 31458-66A Complete, Black VT No. 31-0148
32-1308 31458-66A Complete, Black 32-0680
32-0303 31542-66 Armature
32-0680 31540-66 Field Coil Set
32-0592 31535-66 Thru Bolts
12-0325 31539-66 Bearing
Prestolite Starter Motor Repair
Kit fits L1966-82 FL (except 82
Classic), L1966-73 GE (Servi-Car).
Includes all parts pictured.
VT No. OEM Item

32-7539 Kit Complete.
32-0301 31537-66 Brush Holder
32-0302 31541-66 Brush Set
13-0120 31534-66 Springs, 10 pack
677
Starter Housing 1965-84 FLH-FXE 4-Speed
43-9150
1982-84 FLH Classic
1980-84 FXSB
43-9153
Starter Shaft Related Parts fit 1965-84 FX-FLH 4 Speed

Starter Shaft Related for 1982-84 FLH classic, 1980-84 FXSB model. Starter housing fits chain drive models only.
with Hitachi Starter. VT No. # OEM Description
VT No. # OEM Item 43-9150 Kit 1965-69 Prestolite
43-9153 A-R Kit 1980-84 FXSB 43-9151 Kit 1970-84 Prestolite
1982-84 FLH 43-9152 Kit 1970-84 Hitachi
12-1174 A 334A Roll Pin 12-1174 A 334 Roll Pin
12-0317 B 9062 Housing Needle Bearing 12-0317 B 9062 Housing needle bearing
12-0934 C 11039 Retaining Ring 12-0318 C 9063 Cover needle bearing
17-9991 D 31300-80A Gear Shifter Lever 12-0934 D 11039 Collar retainer ring
17-0019 E 31310-80A Starter Shaft 17-0088 E 11041 Shaft spacer
17-9985 F 31311-80 Spacer, Shaft 14-0501 F 11101 O-Ring deflector plate
12-0569 G 31312-80 Shaft Nut 17-1505 12-2111 G 24811-59A Housing Stud
12-9916 H 31313-80 Retaining Ring 12-1147 Stud, Pair
15-0655 I 31320-80 Housing Gasket 32-0638 H 31443-65A Accel Starter Drive
15-0656 J 31321-80 Cover Gasket 17-1507 I 31445-65 Gear Lever
17-9938 K 31340-80 Shaft Gear 43-9120 J 31465-65 Housing 1965-E79 FL
14-0156 L 31341-80 Oil Shaft 17-1505
Prestolite 1971-72 FX
17-9992 M 31387-80 Housing, 1982-84 Classic 43-9121 J 31572-73 1973-79 FXE Hitachi
17-9993 N 31397-80 Housing Cover 43-9122 J 31572-79 1979-up FX Hitachi, 80-83 FLH
32-0639 O 31443-65A Bendix Drive 17-1506 43-9123 J 31465-79 L1979-84 FLH Prestolite
17-1506 P 31478-65A Pivot Bolt 17-1506 K 31478-65A Pivot Lever Bolt
17-1504 Q 31502-65 Thrust Washer 17-1511 K 31478-65A Pivot Lever Bolt, Chrome
17-1502 R 31503-65 Shift Collar 17-9900 L 31482-65 Starter Shaft, 1965-69
17-0085 L 31482-70 Starter Shaft, 1970-84
17-1508 N 31485-65 Gear, Starter Shaft
Installed 17-0081 O 31493-67 Nut, Starter Shaft
17-1503 P 31501-65 Housing Thrust washer, 65-69
17-1504 Q 31502-65 Thrust washer outer cover
17-1502 R 31503-65 Shifter Collar 1965-69
17-1505 R 31503-70 Shifter Collar 1970-84
17-0084 S 31530-65A Nut/Spacer Left Hand 1965-84
17-9936 T 31531-69 Spacer 1965-82
17-0509 U 60516-65A Oil Deflector Plate
Primary Case Saver protects inner case and starter housing
15-1064 V 60559-80 Gasket plate
area which is damaged by drive chain. Reinforced nylon.
17-0237 Kit P, C, L, R, D, E, Q, G, S; 1965-69
VT No. 19-0415
17-0238 Kit P, C, L, R, D, E, Q, G, S; 1970-84
678
43-9151 Shown
Starter Housing Kits
Starter Housing and Hardware Kits include housing, shaft, gear, arm,
pin, starter drive and related mechanical hardware only. Note: Starter and
electric components not included.
VT No. Model Type
43-9151 1970-84 Big Twin Prestolite
43-9152 1970-84 Big Twin Hitachi
43-9153 1980-84 FXSB Hitachi
1982-84 FLH
Starter Shafts and Spacers. 43-9165
17-0085 VT No. OEM Fits 17-0240
17-0085 31482-70 1970-84 Big Twin
17-0019 31310-80A 1982-86 Big Twin
with rear belt drive
17-9983 33120-79 1980-85 FLT-FXR
17-0084
17-0084 31530-65A 1965-84 Big Twin, Nut/Spacer
1965-88 Housings
CLASSIC
32-0991 32-0992 32-0993 43-9120
17-0965
32-0990 17-1508
Starter Shaft Housings are available as kits that include bear-
ing and mounting bolts or as housings only. 1979-84 FLT-FXR
Housing VT No. OEM Starter Model 17-9990
Only Kit
32-0990 43-9120 31465-65 Prestolite 1965-Early 79 FLH,
1971-72 FX
12-1147 — Studs As Above
32-0991 43-9121 31572-73 Hitachi 1973-Early79 FXE
32-0992 43-9122 31572-79 Hitachi Late 1979-84 FXE,
1980-83 FXWG
32-0993 43-9123 31465-79 Prestolite Late 1979-82 FLH
Starter Related Hardware.
Starter Drive features high strength five roller clutch, VT No. OEM Item
stainless steel springs, hardened ramped clutch receiv- 43-9165* Kit 1979-84 A, B, C, D, E, G, H, I, K, L, M
ers, premium bronze bushing and factory pre-lubing. 17-0240* Kit 1985-88 As Above
1965-88 Big Twin. Replaces 31443-65A. 12-0317 9062 A Housing Needle Bearing
VT No. Brand 17-0240 12-0318 9063 B Cover Needle Bearing
32-0638 Accel Heavy 12-0934 11039 C Starter Motor Retaining Collar
32-0639 Volt Tech 17-0088 11041 D Starter Shaft Spacer
32-2506 Volt Tech Heavy Duty 32-0638 31443-65A E Bendix Drive
17-1508 31485-65 F Gear, 1980-85
32-1097 Drive Kit
17-0965 Steel G Shift Lever, Starter FLT-FXR
17-0238 17-0081 31493-67 H Nut for Shaft
17-9987 31495-79 I Pivot Pin FLT-FXR
17-9988 31497-79 J Housing, 1980 FLT
17-9989 31497-81 J Housing, 1981-Early 83
17-9990 31497-83 J Housing, 1983-85
17-9995 31572-86 J Housing, 1986-88
17-1504 31502-65 K Thrust Washer
17-1502 31503-65 L Shift Collar
Starter Shaft Assemblies include shaft, drive nut, collar, bearing 17-9983 33120-79 M Starter Shaft, 1979-84 FLT-FXR
and thrust washer. Drive not included. Order starter drive sepa- 17-9984 33121-79 O Spacer, Shaft, FLT-FXR
rately. 17-9985 31311-80 O Spacer FXST
VT No. Year Model *Note: Order appropriate housing to complete assembly.
17-0237 1965-69 FL 17-9990 17-9995 17-9988 FLT Starter Housing. Order
17-0238 1970-84 FLH bearing separately.
1973-84 FXE VT No. Year
17-0239 1980-84 FXB 17-9990 L1983-85
1982-84 FLH 17-9995 1986-88
17-0240* 1985-88 FLT-FXR *Note: 5 Roller Starter Drive 17-9988 1980 only
*Note: Order appropriate housing to complete assembly 17-9989 1981-E83
17-0241 1984-85 FXST 12-0317 Bearing
17-0242 1986-88 FXST 679
Starter Solenoid
32-0697 32-0956
Installed
Starter Solenoid Kit fits 1965-84 FL-FX and 1984-88 FXST

models. Kit includes chrome or zinc solenoid, outer and inner
rubber boot, foam gasket, bolts and spacer.
VT No. Finish
32-0697 Zinc
32-0698 Chrome
32-0699 The Lever Starter System
is made from CNC billet alu-
minum and assembled with
accurate components. Unit fits
32-0633 4 speed electric start models
from 1965-88 with separate
Starter Solenoid replaces 71469-65 used on 1965-84 FL-FLH
starter solenoid. This hand
models.
operated system will always
VT No. Brand Finish
32-0699 Volt Tech Zinc 32-0956 work. It mounts in the place of
the starter solenoid; just pull
32-0633 Accel Zinc
the lever and go. Requires
32-0632 Accel Chrome
separate purchase of starter
5-Speed Starter Solenoid replaces 31489-
relay depending on wiring con-
79. Fits 1979-88 FLT’s and 1982-88 FXR’s. 32-1443
figuration. See instructions on
Note: 1984-88 5-Speed FXST use 4-Speed
the web.
style solenoid.
VT No. Finish Brand VT No. Item
32-0636 Zinc Accel 32-0956 Lever Starting System
32-0637 Chrome Accel 32-0642 Relay
32-0986 Zinc V-Twin 32-1443 Relay
32-0637
32-1055 Chrome V-Twin
A A
32-7571 C
28-2019 B
Solenoid Plunger Hardware fits 1965-88 solenoids.

VT No. # OEM Item
32-7571 Kit All Listed
12-1176 A 255 Roll Pins
12-1177 F 600 Roll Pins
D F
12-1178 E 601 Roll Pins E
12-1180 E 614 Roll Pins Chrome Solenoid Body Covers.
32-0590 G 31435-65A Plunger VT No. # OEM Years/Models
13-0118 H 31438-65A Over-Run Spring 28-0117 A 31475-77 1965-88 Big Twin, Black
32-0591 B 31439-65 Retainer, 1965-84 28-2019 A 31475-77 1965-88 Big Twin, Grey
13-0119 C 31440-65 Return Spring 42-0401 B 1965-82 Big Twin
28-1997 D 31441-65A Plunger Boot 42-0089 C 94886-83TA 1965-84 FX-FL 4-Speed
32-0318 J 31452-65 Spacer, each 1986-88 FXST-FLST 5-Speed
15-0181 I 60645-65 Gasket 42-9928 D 94869-87 1980-88 FLT-FLHT-FXR 5-Speed
Volt Tech Starter Drive Kit 42-0400 E End Cover 1965-88 FL-FXE-FXR-FLT
includes snap ring, thrust wash- 42-0025 F 31355-88 1979-88 5 Speed FXR-FLT
er, fork arm pivot bolt and high Accel Solenoid Rebuild Kit.
strength Volt Tech starter drive. provides complete overhaul for
VT No. 32-1097 71469-65 and 31489-79 solenoids,
stock and aftermarket.
VT No. 32-0634
680
D
F
2546-1
Starter Relay
A A B 32-0642 C
E
2547-1
H
I K
2545-1
G 32-0643
2490-1 2450-1 2449-1
2491-1 D 32-0772
2492-1 Starter Relays
2489-1
VT No. # OEM Fits
Control Cable/ Wire Loom Clips are of formed spring steel with
32-0640 A 71463-73A 1974-79 FL, 1985 FX
parkerized finish, sold each. Check parts book for proper fitment.
Accel Late 84-E85 FLT-FXR
Colony VT No. # OEM Fits
CLASSIC
32-0641 B 71463-73A As Above V-Twin, Replica
2546-1 32-0558 F 9977A 1950-60 Big Twin Neck
32-0642 C 31506-79 1980-90 All Accel
2547-1 32-0361 1946-E47 Big Twin Bull Neck
32-0738 D — As Above with Weather Proof Skirt
2545-1 — I 9977-46A L1947 Big Twin Bull Neck
32-0643 71455-67 1967-E68, L71-74 XL
— 32-0348 A 9983 1936-57 Big Twin Taillight Left
32-0185 G 71455-67 1967-E78 Replica
Upper Frame Tube
2490-1 — H 4728-30A Big Twin & 45 Center Post, 1 /4” 1 Start Boost Relay will boost voltage in single fire
2491-1 — E Brake Light/Battery ignition applications during cranking will allow full
— 32-0350 G 9976 45 Rear Frame, 4 pack battery voltage to the module and coil.
— 32-0356 D 1602-30 1” Inner Diameter Handlebar VT No. 32-3000
2450-1 — E 9979 1936-69 Big Twin Front Frame
Leg (Generator Wire)
— 37-0268 K 56626-37 Timer Cable 1937-46, 11/8” ID 32-8036
2449-1 — 9976 Cable Clamp
2450-1 — 9979 Wire Clip 32-8041
2489-1 — 10012 Frame Head 1961-84
2492-1 — 4727-23 Wire Clip
Starter Relay Connectors
37-8129
VT No. OEM Fits
Vinyl Coated Cable Clamps can be 32-8036 72046-79C 1979-up All Twins
mounted to frame fork or fenders to help 32-8041 4-lug 1973-78 All Twins when using
route cable wires or brake lines. Mount hole 1979-90 type starter relay
available in ¹⁄₄” or to fit #10 screws (.200). 32-8042 5-lug As Above
VT No. Qty Inner Diameter Mount Hole Note: 32-8036 includes crimp style connector ends and
37-8128 10 ¹⁄₄” ¹⁄₄” 32-8041 and 32-8042 includes pigtail harness.
37-8129 10 ³⁄₈” ¹⁄₄”
37-8132 10 ¹⁄₂” ¹⁄₄”
37-8904* 25 ⁷⁄₁₆” .200”
37-0832 5 ³⁄₈” .200”
*Note: Uncoated. 42-0313 42-0553
Side Center Chrome Starter Relay Cover Kit includes hardware.
Replaces 66425-68. Use on 1965-84 FL-FLH.
A A
VT No. Style
D D 42-0313 Smooth
42-0553 Gold Inlay Spirit
37-8680 Ground Clamp attaches to oil line on 1936-40
“D” is the diameter of the tube it models, each.
fits. “A” is the size wire/loom that is VT No. 31-0275
secures.
Control Cable Clamps are zinc plated spring steel, pack of 10. Zinc Plated Strap Clamps with ⁹⁄₃₂” hole, are sold
VT No. D-Tube Size A-Cable Size in 10 pack.
37-8677 1” Side ³⁄₁₆”-⁷⁄₃₂” VT No. U Size
37-8678 1¹⁄₄” Side ³⁄₁₆”-⁷⁄₃₂” 37-9139 ⁷⁄₁₆”
37-8679 1” Center ³⁄₁₆”-⁷⁄₃₂” 37-9142 ⁵⁄₈”
37-8681 1¹⁄₈” Center ⁵⁄₁₆”
681
Handlebar Switch
1982-95 Switch Kit 32-0447
B 32-8003 D 32-9069 D
32-0554
32-1261 32-0574
V-Twin Replica Handlebar Horn Switches feature cloth orig-

A inal style wiring, chrome plated housing and stainless screws.
Army style are O.D. painted. Feature exit at bottom of switch.
E 32-8002 VT No. V-T OEM Wire
32-1261 — — 2
C
32-0574 — 71800-26 1 Cloth
32-7782 32-0554 — 71800-26A 2
1982-95 Handlebar Switch Kit includes complete right and left 32-0447 32-1263 71800-26 1
switch assemblies, brake light switch, mounting screws and clips. 32-1262 32-0555 32-0533
Black Chrome OEM Item
32-8000 –– 71599-92 (A) Left turn signal
32-8001 –– 71589-92 (B) Engine, Stop-Start V-Twin Replica Handlebar Dimmer Switches. Cloth wire.
32-8002 –– 71591-92 Right turn signal VT No. V-T OEM Wire Exit
32-8003 32-9069 71597-92 Dimmer and Horn 32-1262 — 74840-29 3 Bottom
32-7782 –– 71590-92 (E) Stop switch, front
32-8084 32-9208 Kit 1982-up Switch Kit
32-0555 32-1359** 74840-29 3
32-0533 — 70058-50B 2 Side
Bottom
Cloth
includes A, B, C, D, E 32-1831* 70058-29 3 Bottom
Hardware for Above, Note: Finish is not black 32-9125* 70058-29 3 Side
37-8966 –– 2907 25 screws pack, zinc *Note: New 2018 Production, No Wires included.**Note: Parkerized
1972-81 Switch
32-0556
32-0573
32-0406 32-0405
32-0403 32-0404 32-0402 Replica Handlebar Directional Switches. 3 Cloth wire side
Handlebar Switches for 1972-81 models. Available with or VT No. V-T OEM
without wire. *Note: 32-0395 is 5 pack.
W/o wire W/o wire With wire
32-0556 32-1663* 70058-50B
32-0573 32-1313 70058-50 Cloth
10 pack Each Each OEM Type Style *Note: New 2018 Production
32-0395* 32-0403 32-8933 71546-75A Hi-Low Rocker
32-0391 32-0404 — 71483-72 Plain Rocker
32-0394 32-0402 32-8931 71547-75A Run-off Rocker
32-0392 32-0406 32-8930 72001-69B Brake Button
32-0393 32-0405 32-8919 71484-72A Starter Button 32-0400 32-0557 32-0442
32-0393 32-0405 32-8920 71484-72A Horn Button
Chrome Button For Handlebar. Use for horn and start
32-0408 — — 71535-72 Long Button
Cap 5/16” 1972-E1973
switch with PVC wires. Replaces 71800-26A.
VT No. OEM Item Wire
PVC
32-0407 — — 71534-72 Short Button
32-0400 71800-26A Horn 2 wire
3/16” L73-81
Switch Control Assortment for 1972-81 models saves time and 32-0557 71800-26A Horn 1 wire
money on dimmer, starter-horn button hardware. 32-0344 71800-26A Parkerized, Horn Button 2 wire
Note quantities supplied. Included are the following: 32-0442 71800-70 Starter 2 wire
VT No. 32-0320 for entire assortment 37-0531 2626 Stainless Mount Screws for Above
Qty OEM Switch Qty OEM Switch 32-0370
32-8085
2 71546-75A Hi-Low 10 71535-72 Long 32-0398
6 72001-69B Brake 10 71534-72 Short
2 71547-75A Run-off 2 71482-72 Plain
6 71484-72A Starter & Horn 32-0401
32-9030 Universal Toggle Switches.
VT No. Type Chrome Handlebar Switch. 2 position type used for Hi/Low beam. 3
32-0423 32-0423 On/off with leads position type features off in middle and can be used for Hi/Low beam
32-9030 Spotlamp On/off without leads or turn signal. PVC Wires.
Chrome Universal Dimmer Switch with horn VT No. Position Exit Note
32-0401 2 Position Bottom No Wires PVC
button, clamps on to 1” bar. VT No. 32-0422 32-8085 2 Position Bottom
32-0398 3 Position Bottom
32-0370* 3 Position Side
32-9125* 2 Position Cloth Side
32-1313* 3 Position Cloth Side 32-1354 Switch Clamp replaces
32-9125 2 Position Cloth Side 10001, to attach switch
37-0531 to 1” handlebars.
32-1663 3 Position Cloth Bottom
37-0531 Stainless Steel Mount Screws for Above Switch Clamp 32-1354 Switch Kit
*Note Features side exit wires. 32-0397 Clamps
32-1462 Clamps Replica
Type
682
32-0419
Ignition Switch 32-0419
32-0449 32-0481
32-8078
6 Post FLH Cast Ignition Switches include cover and two keys for
1973-84 FL’s, cover installed as noted.
VT No. Brand Top 32-1191
32-0419 VT Cast Top
32-8078 Replica Cast 6 Post 32-0480
32-1512 Replica Tin
Hardware for Switches Chrome Mechanical Switches. *Note: Includes early style top.
37-8917 2625 Mount screw, 7015 washer, 24 pack Smooth Skull Type Key Year
32-0449* 32-1191 5 post Flat 1947-72
32-1524 32-1635 32-0481* 32-1196 5 Post Round 1947-72
32-1190 5 Post Round 1947-67
32-0419* 32-1192 6 Post Flat 1973-95
32-0480 32-1199 6 Post Round 1973-95
32-9267 32-1193
CLASSIC
32-1510 32-1637
32-8109 32-1194
6 Post Electronic Type
32-1511 Smooth Skull Finish Fits Key
5 Terminal Replica Switch include a replica cover and Briggs 32-8109* 32-1193 Chrome 1973-95 Flat
and Stratton flat key set with corresponding number lock. 32-9267* Stainless Steel 1973-95 Flat
32-0482* 32-1194 Chrome 1973-95 Round
Chrome Brass Year
*Note: Includes Early Style Top.
32-1524* 32-1635 1936-46
32-1343
32-1304 As Above,black 32-8077
32-1510 32-1637 1947-67 5 Post
32-1511 1968-72
32-1343 1936-52 Top Cover
*Note: Early type fits 1936-46 cat eye dash base. 32-1271 32-1147
Chrome Electronic Ignition Switch has Chrome OEM Type Fits Key
smooth action & dependability of electronic 32-0455* 4527-36 Replica 1936-46 Flat
switching. Eliminates original pole to bar con- 32-0418 71501-36 Steel type 1948-67 Flat
tacts found in original equipment switch. Helps 32-8077 71501-36A VT 1948-67 Flat
withstand vibration and corrosion, 6-pole type. 32-0481 Side 1948-72 Barrel
Replaces 71501-73. Includes two keys and *Note: Fits 91936-46 cateye dash and has double cut keys.
chrome switch cover. VT No. 32-8070 Ignition Switch Components
37-8916 2589 Switch Terminal Screws & Washers, 24 pack
32-0482 Hinge Switch features 32-1271 Component Kit 1936-67
round key set. Fits 6 post, 32-1147 Key Lock Tumbler 1948-67
1973-95. Rear hinge. 37-8917 2625 Bob Switch Mount Screws &
VT No. Type 7015 Washers, 24 pk
32-0480 Contact 32-0161
32-0480 32-0482 Electronic
Switch Covers fit FLH dash
32-0416
switch. Chrome Stock Key Switch for ignition and light switch for Super
VT No. Year/Type Glide. Used on all FX-FXS, 1982-93 all FXR. Includes two flat keys
32-0396
32-0399 32-0396 1936-67 Steel and mounting ring.
32-1343 1936-67 Chrome VT No. Type Year
32-1382 1926-37 Brass 32-0161 Replica 1977-93
32-1343 1936-52 Chrome 32-0416 Stock Type 1977-93
32-1343 32-0399 1967-up Diecast 32-0175 Replica 1973-76
Late Dash Plate Ignition Switch Spacers for spacing dash base
Universal Key Switch includes mounting ring and
and switch in relation to tanks, packs of 10.
39-0422 39-0118 two flat keys.
VT No. Size Type
VT No. Type
39-0420 .030 Dash 32-0415 32-0415 On-Off-On 32-0478 Off-On Start
39-0421 .060 Dash 32-1266 Off-On Start
39-0422 .120 Dash 32-0478 Off-On-Start 32-1556 On-Off Chicago
39-0118 .040 Switch 32-0479 Off-On-On
31-0151 42-0525 31-0262 Weld On Ignition Mount Collar
accepts 32-0161 switch.
32-1556 VT No. 32-0820
31-0150
Chrome Switch Brackets. Hi-Low Beam Switch Relay will allow the Hi-Low beam
VT No. Years Model to be switched from one beam to another using one wire
31-0150 1978-84 FXE-FXS momentary horn type button.
31-0151 1936-84 Transmission Mount Big Twin VT No. 32-0448
32-1104 KEY, GROUND SWITCH LOCK
42-0525 1982-90 FXR 32-1139 REPLICA IGNITION SWITCH
31-0262 Universal 32-1763 IGNITION SWITCH TUMBLER
683
Neutral Switches Oil Pressure Switches
12-1402
D
E C 32-0539 12-1401 32-0427
32-0282
32-0586
B A 32-0818
Neutral Switches are replica type, replaces the following FLH-
FX models.
Oil Pressure Switches are precision calibrated.
VT No. # OEM Type Fits Speed
VT No. OEM Year/Model
32-0417 A 33900-59 Stud L1973-E79 4 32-0287 1936-37 Big Twin
1979-98 5 12-1401 26550-38A 1939-68 45”
32-9065 A As Above USA 12-1402 26551-39 1939-68 Big Twin
32-0501 B 71507-64A Replica 1965-70 4 32-0586 26551-39A 1952-58 Big Twin
32-0539 71507-64B 1965-70 4 32-0282 26557-39B 1958-69 Big Twin
32-0500 C 71507-71 Blade 1971-78 4 32-0427 26552-72 1941-84 Big Twin
32-0043 D 33901-79 Plunger 1979-84 4 32-0818 Wire 1970-up Big Twin
15-0685 34043-80 — Gasket (10) Oil Pressure Switch Fitting replaces
15-0217 25811-11 — Gasket (10) 26569-58 for Big Twins. Allows use of ¹⁄₈”
32-0425
Brake Switches 12-1403 40-1421
NPT switch 32-0427 in early motors.
VT No. Year/Model
Flag 12-1403 1958-64 FL
Screw 32-0426 40-1421 1936-40 EL, Parkerized,
Hydraulic Brake Switch features heavy duty contacts and extension
quality brass terminals.
Sealing Washers for Oil Fitting,
VT No. Type Years Brand
Pressure Switch, Relief Valve, Check
32-0425 Screw 1958-68 FL, 1951-68 G V-Twin
Valve, and Tappet Oil Screen in brass
32-0434 Screw As Above Accel
32-0426 Flag 1969-84 FL, 1971-84 FX V-Twin VT No. OEM Fits Type
32-0435 Flag As Above Accel 14-0031 6156 1941-69 Big Twin Adjuster Screw
32-1629 Flag Custom Banjo V-Twin 14-0032 6581 1954-78 Big Twin Relief Valve Plug
2503-4 37-9013 14-0033 6377 1950-99 Big Twin Oil Pump Seal Washer, 5 pk
14-0178 6375 1946-57 Big Twin Pressure Switch and
45 Banjo line
32-0430
Flasher
33-0399 33-0397 33-2198
Brake Light Switches are pull type.
VT No. OEM Item Years
32-0430 72003-34 Kit, chrome 1936-57 Big Twin Rigid
32-0438 72004-39 Kit, black 1939-52 45”
15-0378 72015-39 All Gasket 33-0848
37-9013 42280-75 Clamp and Pin
33-2173 33-0398
42284-35
2503-4 — Mount Kit All 32-8925
32-7605 32-7604 32-1230
Flashers for turn signal indicator lights.

VT No. OEM Item
Replica Kits fit Big Twin 1936-57.
33-0399 68543-64A Round
VT No. Finish
33-0848 10 pack Round
32-7604 Black
33-0916 68543-64C Round Solid State
32-7605 Chrome
33-0397 68541-64 (4 way)
32-1230 Hardware Kit includes parkerized switch spring,
33-2198 As Above Rectangle, Replica
wire hook and clamp with pin
33-2173 As Above Rectangle, Plastic
32-1163 Body Complete Black
33-0938 LED 12 volt
33-1179 Switch Bracket, Parkerized
32-8925 Mount Flasher
33-1180 Housing Only Parkerized
33-0398 68543-61A 6 volt
Rear Brake Switch Pull Kit 12 Volt 2 Pin Flasher Units with built in bulb failure indicator.
VT No. Bracket Finish Spring 33-2350 10 Watts
2998-5 Cadmium 1940-57 33-2351 21-23 Watts
2999-5 Parkerized 1940-57 Hi-Low Beam Switch Relay will allow the Hi-Low beam
3001-5 Cadmium 1939-52 W
to be switched from one beam to another using one wire
3002-5 Parkerized 1939-52 W
684 momentary horn type button. VT No. 32-0448
A B
Circuit Breaker
32-0458 32-0414
32-0412
32-8921
Terminal Boards (A) is pre-assembled, painted and properly
insulated to eliminate grounding. Includes mounting studs. (B)
Fiber terminal plate mounts to forks behind headlight on FLH. 32-0413 32-8922
VT No. # OEM Fits 37-9069
8005-12 A 72325-48 1948-69 Big Twin and 45
32-0321 B 72301-49 1949-57 Big Twin
32-0357 B 72301-49A 1958-69 Big Twin
8823-10* 72341-48 1948-55 Mount Studs
8824-8 72341-56A 1956-82 Mount Studs 8823-10 32-8945 12-0581
CLASSIC
8824-8T 72341-56A 1956-82 Mount Studs, Zinc
*Note: Studs attach terminal board and coil mounts. 31-9952
Frame Electrical Terminal Screws &
Fittings replaces 1523-26A on 1936-47
Big Twin and 45’s. Includes insulators,
screws and nuts. VT No. 8942-14
Electrical Terminal Plates are pre-as-

sembled for main junction which includes
studs for mounting coil and auxiliary junc-
tion for headlamp wiring.
Circuit Breaker are stock replacements.
VT No. # OEM Amp Fits
32-0458 74586-70 30 1970-72 FL
32-0412 B 74594-71 20 1971-72 FX
VT No. # OEM Type Model 32-0414 A 74589-73 15 1973-up FL, FX
9639-22 A 72300-70 Main 1970-77 Big Twin 32-0413 A 74559-77 30 1978-up FL, FX
9817-15 B 72303-70 Headlamp 1970-74 FX 32-8921 C 74598-73 Connector Bar, each
Ground Clamp attaches to oil line on 1936-40 32-8922 69999-77 Connector Bar, each
models, each. 32-8945 ⁷⁄₈” C/C Connector Bar, pair
VT No. 31-0275 37-9069 D 7602 Nylon Nut, ¹⁰⁄₃₂”, 25 pack
12-0581 E 7629 Nut, 25 pack
Terminal Board 31-9952 F 9952 Mount Clip, 10 pack secures
Terminal Blocks with terminal breaker or flasher to fender
32-0502 studs. 10-24 thread. 31-9964 G 8672 Rivet for Above
VT No. Terminals
32-0880 32-0502 4
32-0880 8
32-0879 12
32-0878
32-0878 16 31-0493 31-0490
Circuit Breaker Bracket available for 2 or 3 circuit breakers,
32-9246 allows standard 15 or 30 amp breakers to snap firmly in place.
Bracket has ¹⁄₄” holes 5” apart. Can be mounted to oil tank
31-0484 bracket or fender.
Terminal Block fits 1973-84 FLH. VT No. Circuit Breakers
VT No. OEM Item Year 31-0493 2
31-0484 72310-70 Bracket 1970-84 31-0490 3
32-9246 72312-73 Terminal Block 1970-84 In-Line Fuse Holder has
Shrink Wrap Tubing. Cut to length, 32-0410 6” long wire leads.
32-8946
thread the wires, carefully apply heat VT No. Type
and watch the insulation shrink to a 32-0410 Fuse
perfectly fit around the wires. Easy to 32-8946 ATC Type
use, 4 foot length only. Warranty
32-0125 VT No. Inner Diameter All Electrical Components sold as individual pieces or in kits are covered
under our warranty “Replacement Only” Provision. All electrical related
32-0124 ¹⁄₄”
item part numbers begin with a 32 prefix. No credit will be issued for these
32-0125 ³⁄₈” items as they are exchange only.
32-8039 ⁵⁄₈”
685
Wiring Components Wire
Terminal
Connector Blocks.
VT No. OEM Type
32-8032 72043-71 Single Pin Insulator
32-8033 72044-71 Single Socket Insulator
32-9095 72035-71 2 Pin Insulator
32-9094 72034-71 2 Pin Socket Insulator
32-8034 72041-71 6 Pin Insulator
32-8035 72037-71 6 Pin Socket Insulator
32-9097 70294-87 10 Pin Insulator Ring Type Terminals.
32-9096 70293-87 10 Pin Socket Insulator VT No. # OEM U/M Item Gauge
32-9033 72276-74 12 Pin Insulator 32-8015 A 9856 25 #6 eye 16-22
32-9034 72278-74 12 Pin Socket Insulator 32-8016 A 9871 25 #6 eye 14-16
32-8017 A 9857 25 #10 eye 16-22
32-8018 A 9902 25 #10 eye 14-16
32-8019 A 9866 25 #10 eye 10-12
32-8020 A 9858 25 1/4” eye 16-22
Regulator Connector Fittings. 32-8021 A 9862 25 1/4” eye 14-16
VT No. OEM Item 32-8022 A 9863 25 5/16” eye 14-16
32-9092 72051-77 Regulator Plug 32-8023 E 9945 25 5/16” eye 10-16
32-9090 74539-77A Regulator Connector Socket 32-8101 A 9859 25 3/8” eye 16-22
32-8103 A 9868 25 3/8” eye 10-12
Flag Type Terminals
32-8025 B 9904 10 1/8” Female Spade
32-9303 C 9905 5 Big Twin Neutral Switch
32-8094 32-8095 32-8096 32-8097 32-8027 B 9914 10 1/4” Female Spade
32-8028 D 9925 10 1/4” Right Angle Female Spade
32-8026 B 9930 10 3/16” Female Spade
32-8029 F 71774-77 10 Female Spade Insulator
32-8900 32-8024 O 9901 25 5/32” Flag
32-8106 9907 10 1/4” Spade Insulator 16-22 gauge
32-1813 32-8098 32-8107 9885 10 1/4” Spade Insulator 16-22 gauge
32-8099
Pins and Sockets
Early Wiring Components are cloth covered wire in 25 foot 32-8030 G 72039-71 10 Pin 32-8037
length and harness loom asphalt type in 10 foot length. 32-8031 H 72038-71 10 Socket
Wire Loom 32-8032 I 72043-71 10 Single Pin Insulator
VT No. Color VT No. Size Item 32-8033 J 72044-71 10 Single Socket Insulator
32-8094 Black 32-8098 ³⁄₁₆” inner diameter Loom 32-8036 K 72046-79 1 Starter Relay Connection
32-8095 Red 32-8099 ¹⁄₄” inner diameter Loom 32-8037 L 72047-71 1 Head Lamp Connection
32-8096 Green 32-8900 ³⁄₈” inner diameter Loom 32-9333 M 72501-74 1 Harness Bushing Straight
32-8097 Yellow
32-1813 Set of 4 45 Parts Book is a 288
pages for 45 models.
For WLA 1941-1944.
VT No. 48-0488
32-8120 32-8121 32-8122 32-8123
32-8124 32-8125 32-8126 32-8127

Knucklehead Service and Parts
Manual is 492 pages. Full parts,
service and dope manual includes a
detailed restoration section that is pre-
32-8128 32-8129 32-8131 sented by Dan Henke of Cairo, New
25 Feet of Braided Wire. York. Dan illustrates all the overlooked
VT No. Color 32-8125 Pure Yellow items that can cost points during a
32-8120 Pure Red 32-8126 Red with Yellow Dot competition when being judged. Shop
32-8121 Pure Black 32-8127 Red with Blue Dot book includes service, parts and
32-8122 Pure Green 32-8128 Black with Red Dot dealer tips for the models and years
32-8123 Pure Blue 32-8129 White with Blue Dot 48-0928 that are listed.
32-8124 Blue with White Dot 32-8131 Yellow with White Dot VT No. 48-0928
686
Wiring Harness Kits
32-0705 32-7555
32-0714 32-0715
Early Twins Wiring Harness Kits are complete and feature

cotton braided wire and asphalt loom.
32-7581 — 1916-28 JD Electric Model
32-7551 32-7584 32-0700 4735-30 1930-36 VL-RL
1970-up Wiring Kits feature plastic wire in original factory 32-0701 4735-36 1936-37 WL-UL and FL
32-0703 4735-38A 1938-46 WL-UL-G and FL
color codes, with all terminals applied, in vinyl loom. Complete
32-7555 4736-42M 1942-45 Army 45
“Builders kits” include handlebar, taillight, coil and regulator 32-0704 70320-47 1947 WL-UL-G and FL
wires, denoted by an *. All other harnesses are main harness 32-0705 70320-48 1948-57 UL-EL-FL-FLH & WL
CLASSIC
only. Handlebar and taillight must be purchased separately for 32-0706 7032-58 1958-64 FL-FLH
these kits. Main harness include the main turn signal wires. 32-0707 70321-65 1965-69 FLH
1970-up PVC Covered Wires PVC Covered Taillight Wires fit 1970-up.
FL-FLH 32-9309 1970-72 FL, 1971-72 FX,
VT No. OEM Application 1973-77 FL 39-9309
32-0714* 70320-70 1970-72 FLH 32-9310 1973-77 FX-FXE
32-9311 1978-84 FL
32-0715* 70320-73A 1973-77 FLH
32-9313 1978-84 FX-FXE
32-7569* 70320-78 1978-79 FLH
Accessory Kits.
32-7568* 70320-80 1980-84 FLH
VT No. OEM Type
FX-FXE 32-1078 70209-41 Ground Wire, BT
32-7551* 70326-73A 1973-74 FXE 32-7549 — 1952-64 Turn Signal Kit, Cotton
32-7584* 70326-75 1975-77 FXE 32-0524 — 1958-84 Turn Signal Kit, PVC
32-9066 70353-78 1978-79 FXS 32-9205 — 1965-84 Big Twin
32-9074 70343-78 1978-79 FXE Small Starter Wire Set, PVC
32-8014 70214-80A 1980-85 FXWG 32-0163 70165-58 Battery Box to Ground 1965-69 Big Twin
32-8091 69543-80 1980-84 FXS-FXB 32-0323 70018-77 Relay to Solenoid Wire
32-1118 69545-82A 1982-Early 84 FXR-FXRS-FXRT 32-0158 70169-70 Relay to Ground Wire
Wiring Harness Kits with Dash Base

39-0182 39-0183 39-0185 39-0186 39-0187
39-0188 39-0190 39-0197 39-0198 39-0199
Replica Wiring Harness /Dash Base Assemblies include complete harness pre-wired to dash base, five or six post key switch,
terminal box, horn button, dimmer switch, headlamp connection, speedo lamp socket and front terminal board when required.
Switch and wiring are tested after final assembly.
Generator Models Big Twin Electric Start Models
VT No. Type Year/Model Generator VT No. Type Year/Model Generator
39-0184 2-Light 1936-46 Big Twin 3 Brush 39-0185 3-Light 1965-67 2 Brush
39-0534 2-Light 1936-37 Big Twin 39-0186 5-Light 1968-69 2 Brush
39-0190 2-Light 1947 Big Twin 3 Brush 39-0184 39-0196 5-Light 1970-71
39-0189 2-Light 1948 Big Twin 3 Brush 39-0197 5-Light 1972 only
39-0182 2-Light 1949-57 Big Twin 3 Brush 39-0187 5-Light 1973-77
39-0183 2-Light 1958 Big Twin Neutral 2 Brush 39-0198 5-Light 1978-79
39-0181 2-Light 1959-61 Big Twin, Neutral 2 Brush 39-0199 5-Light 1980-84
39-0188 3-Light 1962-64 Big Twin 2 Brush Note: Order the appropriate factory service manual to
687
Alternator Kits 32-7781 32-0776
1970-up
32-0796 32-7500
32-7776
22 Amp High Output Alternator Kits fit all 1988 and earlier
models. Stock on all 1983-88 models. Replaces 29982-81.
VT No. 32-7776
32-7807 32-0775
Stator Assembly Kit for Big Twins 1970-88 includes (2)

29988-73 locks, (1) 29954-71 retainer, (4) 2653 screws and (2)
2216W screws.
VT No. # OEM Item
32-0598 Kit Complete, all
32-0604 A 29954-71 Nylon Retainer, 10 pack
32-0603 B 2216W Screw, 10 pack “Volt Tech” Alternator Kit fits 1970-95 Big Twins. It includes
37-8812 C 29988-73 Lock Plate, 10 pack stator, rotor with stainless liner “to seal magnets in place” except
37-8811 D 2653 Screw, Fillister, 10⁷⁄₈” VT No. 32-7500 chrome regulator and mount kit.
37-9003 D 2712 Screw, with Lock Patch, ⁷⁄₈” 18 Amp Kits
37-9126 2720 Screw, with Lock Patch, 1” VT No. Stator Amp
Unmolded Molded 32-7781 Molded Sealed Magnet
22 Amp Kits
32-0776 Exposed Sealed Magnet
32-0796 Molded Sealed Magnet
32-7500 Molded Exposed Magnet
32-7776 Exposed Exposed Magnet
32 Amp Kits
32-7807* Exposed Sealed Magnet
Plug End & Wire Only. 32-8927 Exposed Sealed Magnet
VT No. #
D Shown For
Reference Only. 32-0593 A
*Note: Reinforced rotor spline
32-0758 32-0759
Stators replace stock units for models listed in molded (M) or unmo-
lded (U) type.
VT No. Brand Pin Type
1970-75 Big Twin, Replaces 29965-70, 18 Amp
32-8082 Volt Tech A Unmolded
32-9039 Accel A Unmolded
1975-80 Big Twin, Replaces 29965-75, 18 Amp Alternator Rotors feature vibration proof magnet construction,
32-0601 Volt Tech B Molded as magnets are held in place by stainless steel non-magnetic
32-9040 Accel B Molded insert for durability. *Note: Reinforced Spline Area.
1981-88 Big Twin, Replaces 29965-81, 22 Amp VT No. Year Model Amp
32-0602 Volt Tech C (USA) Molded 32-0758* 1970-90 FL-FX 22/32
32-8081 Volt Tech C Unmolded 32-0759 1981-00 FL-FX 22/32
32-9042 Accel C Unmolded
32-9041 Accel C Molded
Warranty
All Electrical Components sold as individual pieces or in kits are
covered under our warranty “Replacement Only” Provision. All
electrical related item part numbers begin with a 32 prefix. No
credit will be issued for these items as they are exchange only. Hobbs Meter for calculating engine running time for 12 Volt 2
Cylinder applications.
VT No. 32-1809
688
1970-up
Regulator
32-0780
Alloy
32-0609 Chrome
Black
Volt TechTM And Accel Solid State Regulators feature rugged aluminum alloy construction.
3
Accel brand is available in chrome, alloy or black stock finish with polished top fins or Volt Tech
2 is available in black or chrome finish. They provide more accurately regulated voltage under all
1
electrical loads. All units listed carry the full replacement warranty by Accel or Volt Tech.
Accel Accel Accel Volt Tech Volt Tech Replace Lead # Fits
Black Alloy Chrome Black Chrome OEM Charging System Type
32-8060 — 32-0797 32-0614 — 74510-70A 38” 1 1200 1970-75 FL-FLH, 1971-75 FX-FXE
12V/15 Amp Alt.
CLASSIC
32-8061 32-0609 32-0850 32-0615 32-0778 74512-79A 57” 2 1200/1340 1976-80 FL-FLH,-FLH 80 FLT Classic
1976-80 FX-FXE-FXS, 80-FXWG, 12V 17.8 Amp Alt.
32-8067 — 32-0852 32-0667 32-0780 74516-86 57” 3 1340 1981-84 FLH-80 Classic; 81-85 FX-FXE-FXEF-
FXS-FXB, 81-88 FLT-FLHT Classic, 82-88 FXR,
1981-86 FXWG 22 Amp.
32-8064 32-0607 32-0857 32-0619 32-0989 — All 12 Volt Generator Models
Battery Eliminator allows operation of Plug End and Wire Only.
Magneto models without battery, boosts VT No. #
D Shown For
spark voltage when starting and prevents 32-0593 A
Reference Only.
light flickering at low engine speed.
VT No. 32-0548
Chrome Alternator Plug Retainer bolts to the

Bracket 1970-99 Chrome Die-Cast Volt Pak
31-0857 front left engine mount bolt for 1970-88 Big Twins. Cover fits all stock rectifiers. It is engi-
VT No. 31-0857 neered to improve cooling for extended
regulator life. The chrome finish reflects
engine and exhaust heat. Grooved to
interlock with regulator and the regulation.
Cover has 20% more fin area than stock.
Plug Retainer replaces 45095-85 on all Big Twin VT No. 42-0405
1970-up 74-80 and Evolutions. It secures connector A B Front Engine Mount Blocks
plug to alternator plug which is in engine case and act as nuts for front bolts and
prevents faulty contact. will mount regulator.
VT No. 13-0219 VT No. Type
31-0739 A
Regulator Mount 31-0635 B
Brackets attach to
engine mount. Chrome Regulator Mount Hardware Kit fits
VT No. Type 80-95 FXR-FLHT, Allen.
31-0172 Zinc VT No. 37-9258
31-0172 31-0784 31-0784 Chrome
Nylon Tie Straps.
Chrome Black Length 31-0168
25 pack 100 pack
28-0720 28-0710 4”
28-0721
28-0721 7”
28-0711 7³⁄₄”
31-1070
Chrome Rectifier-Regulator Bracket Mount.
31-0168 74533-75B 1976-86 FX-FL
28-0710
31-1070 74529-79 1979-89 FLT
689
2-Brush Generator 1936-69
32-0790 32-0207 32-0967
32-0787 2-Brush Replica Generator by Cycle Electric or Volt Tech. All

2-Brush Style Generators with built-in regulators by Cycle styles fit 1952-81. Order gear kit separately.
Electric or Volt Tech brand. All styles fit 1936-69 FLH including VT No. OEM Volts Type Finish
Flatheads. On pre1958 models, engine case must be drilled to 32-8999 29975-65A 12V VT Black
accept ⁵⁄₁₆” size mount bolts. Order gear kits separately. Order 32-8998 29975-65A 12V VT Chrome
VT No. 32-0204 for gear kit to complete the installation. Units 32-7526 29975-65A 12V CE Black
noted as low output are for use with VT No. 53-0505 mini 12 32-0967 29975-65A 12V VT Black
volt battery. 32-0207 29975-65A 12V VT Chrome
VT No. Volt Type Finish Brand 32-0213 29975-61A 6V CE Black
32-0212 12 Low Output Black CE
32-0214 29975-61A 6V VT Black
32-0790 12 Low Output Black VT
32-0787 12 Low Output Chrome VT Mount Gasket fits 1958-84 2 brush generator.
32-9000 12 High Output Black CE VT No. 15-0150
32-0788 12 High Output Black VT
32-0789 12 High Output Chrome VT 32-0795
32-9001 6 Standard Black CE
32-0204 Big Twin Gear Kit 13 Tooth
2 Brush Generator Gear Kit is available as
complete installation kit. Kit includes gear and
deflector nuts. Fits 1958-69 74 FL. 13 Tooth. 32-0785
VT No. Item Regulator End Cover features solid state components in gen-
32-0204
32-0204 Kit erator end cover. Cover with needle bearing installed is black
32-0220 Gear Only with fins for all 29975-65A 12 volt and 29975-61A generators.
Solid State Generator Regulator features die- VT No. Volt Type Brand
cast chrome end cover which mounts to all 1965- 32-7768 12 Black Cycle Electric
77, 12 Volt, 2 brush generators. Small solid state 32-0795 12 Black V-Twin
regulators fits behind cover for a clean look. 32-0785 12 Chrome V-Twin
VT No. 32-7757 32-9282 12 Low Amp for use with
Generator Screw Kit will install 3 brush gen- mini battery 53-0505
erators with 1/4-24 threads to cases that have 32-0786 12 Chrome V-Twin
been drilled out for 5/16” bolts. Fits 1936-57 As Above, Low Amp
Big Twins. Warranty Information
Volt Tech Brand Electrical Products Warranty claims are serviced through our
VT No. Finish Missouri Facility. Cycle Electric warranty claims are returned to Cycle Electric Co in
2990-2 Cad Ohio. Allow extra time for claims. All electric items will be repaired and replaced at
2991-2 manufacturer’s discretion, and no credit will be issued for these returns.
2991-2 Parkerized
Alternator Generator 32-0371 32-0371

Installed
Conversion
32-1672
Alternator Conversion Kit replaces original generator and

regulator. Compact, high output alternator, is 3¹⁄₄” long, weighs
only 3lbs. Features include high power output, billet housing
for strength and accurate alignment, stress proof shaft which is
stronger than stock. The kit includes alternator unit in chrome
or black, black voltage regulator and instructions. It fits 12 volt
1965-83 XL as well pre 1965 which have been converted to
12 volt electric. Kit can used on earlier models if generator bolt
holes in case are drilled out to ⁵⁄₁₆. Cannot be used with mini
(12N55A-3B) battery.
COMPACT DESIGN REPLACES EARLY 6 OR
12 VOLT GENERATORS 32-1675 VT No. Item
32-0390 Chrome Alternator
Alternator Conversion Kit. 32-0372 Chrome Alternator
VT No. Finish Fits 32-0371 Black Alternator
32-1672 Black 1948-69 FL 32-0667 Replacement Regulator
32-1675 Chrome 1948-69 FL 14-0034 Seal
690
32-0750 Conversion
System
32-0767
Generator-Conversion Kit includes all parts illustrated includ-

ing a “look alike” 12v regulator and automatic advance distrib-
utor. Converts 6 volt to 12 volt system. Fits 1936-65 Big Twin
CLASSIC
OHV
VT No. 32-0767
32-1165
Generator-Regulator Conversion Electrical Kit includes all
necessary components to convert a 1936-69 Big Twin to a
12 volt system. Kit includes a 12 volt generator with a built in
solid state regulator, mini 12 volt battery, battery box kit which
fits in the original 6 volt battery compartment, 12 volt coil, auto
advance distributor and generator screws. Alternator 12V Conversion Kit
Black Chrome includes alternator and black solid
32-0750 32-1165 state regulator. Order gear kit sepa-
rately.
We Test VT No. Item Fits
32-1282 Alternator 1936-57 BT 32-0204
On Site! 32-0204 Gear Kit 1941-69 BT

32-1385 Electronic Relay
32E Generator Tester for 6 volt models with relay only.

This is the test unit used to check 6 volt 32E 3 brush genera-
tors with relay. *NOT FOR SALE* Fits 1936-52 EL and 1941-57
FL. VT No. 16-1702
32E Alternator Kit includes a black 12V alternator, with a

chrome end cover, black finned solid state regulator and gear
kit for OHV models.
VT No. 32-1873
691
3 Brush Generator Repair
Generator Cover 32-1509
32-0215
Generator Brush Holder. Includes springs.
VT No. OEM Item
42-0411 42-0438 42-1522 32-1087 12 V Generator
32-1119 6v Complete 32E 6 Volt Generator, SV
Generator End Covers. 32-0215 — Complete Generator, OHV 32-0977
Chrome Black Stainless Steel Model Years 32-1509 — Complete, Without gear
12-0302 9005 Bearing, Rear
42-0411 42-0438 42-1522 3-Brush 1932-57 12-0303 9007 Bearing, Front
Generator Hardware Kits include gaskets 32-0191 — Oil Retainer
and replacement hardware. 12-0583 1210 10-32 - ⁵⁄₈” Screw, 10 pk 15-0287
32-0197 Positive Brush Holder
VT No. 32-0228 32-0273 Negative Brush Holder
32-0211 30385-32 Brush Holder, 3rd
2863-7 — Negative Brush Holder
Generator 3-Brush Terminal 2126-12 — Position Terminal Screw Kit
Gaskets and Hardware Kit is a 32-0166 30012-32 Frame Screw, pair 32-1852
3-brush type. Fits 1932-57. Includes 9520-4 30280-18 Pole Screw Kit
9520-4T — Pole Shoe Kit
gaskets, insulators, bearings and 12-0700 6743 .030 Armature Shim
screws. 12-0701 6743A .060 Armature Shim
VT No. Type 32-0216 31035-31 Oil Deflector
14-0112 30145-46 Seal
32-1235 Complete 32-0223 30851-32 Armature (32E)
2126-12 Screw Kit 2126-12 32-0268 — Armature (32E)
32-0286 — Armature (32E) 32-0232
32-1235 32-0232 30425-32 Brush Set (32E)
Generator Gear Kit is available as com- 32-0233 30425-51 Brush Set (52E)
32-1535 30206-32 Replica Field Coil Set (32E)
plete installation kit. Kits include gear, 32-1852 30206-32 Field Coil Set (32E) 32-0831
deflector nuts and proper pieces for appli- 32-1237 — Field Coil Set (32E)
32-1853 30201-52 Field Coil Set (52E) 32-0268
cation. 1932-57, 3-brush OHV, 14 teeth. 32-0087 9900 Field Coil Wire Term.
VT No. 32-0205 32-0165 — Generator Body
32-0831 — End Housing
32-0240 1937-57 45 and UL Generator 32-0834 — Pole Shoe Set
Kit Gear Parts. 32-0977 — Pole Shoe Set
32-1538 Tag Brass
VT No. OEM Item Kits Pole Screw
32-0550 31071-37 14 T Gear 32-1878 — Tag Kit VT No. 9520-4
12-1214 325 Gear Pin 32-0275 Tag With brushes
32-1546 — Kit
32-0240 Kit includes Gear, Pin, 32-0265 — Bearing House Kit
Spring and Dust Shield 32-0165 — Bearing House Kit
32-0216 31035-31 Deflector 32-1546 — Kit
32-8116 12v Generator Bearing Housing Generator Brush
32-0218 32-0550 32-0088 Generator Strap Holder
32-0089 Generator Strap Screw Set VT No. 32-0211
32-0092 Generator Frame 32-0265
32-0195 3-Brush Generator Inner Oil Retainer
12-1185 32-0832 32E 6 Volt Generator Rebuild Kit
32-1124 6V Commutator for 32E Armature
32-1521 Replica Generator Tag
12-1214
Generator Gaskets
VT No. James OEM Item 15-0586
15-0217 15-1143 25811-11 Generator stud washer
13-0165 8152-2 for 1911-85 FL, XL
15-0226 15-1021 30138-30 1937-48 Generator End Cover
Generator Gears Only. 15-0287 15-1022 30143-30 1930-57 Generator to Case
VT No. OEM Tooth Use 15-0586 — Pair 1930-57 Generator to Case
32-0218 31070-30 14 Big Twin, 1936-57 Overhead Valve 31-1323 A
32-0550* 31071-37 14 Big Twin, 1937-57 Side Valve B
12-1185 327 Gear Pin
31-1323
12-1214 325 Gear Pin, Replica
13-0165 31040-31 Gear Spring, 1930-57
A-Generator Mount Strap is for 3-brush type generator.
*Note: With Slinger VT No. OEM Years Model Finish
Generator Gear Puller Center Cap use 31-3955 30025-30 1932-52 45 and SV Chrome
31-3957 30025-36 1936-57 Big Twin OHV Chrome
with claw type pullers. OEM# 95636-46. 49-0056 As Above 1936-57 Big Twin OHV Parkerized
VT No. 16-0638 31-1323 Kit 1936-57 Big Twin OHV Parkerized
B-Generator Mounting Kit
Generator Mounting Screws. 8214-7* Mount Kit All Cadmium
For 1936-57 Big Twins Overhead Valves 8153-2 9681-7* As Above — Parkerized
Chrome Cadmium Parkerized Brush Style *Note: Includes screw, shims and washers.
8151-2 8152-2 9679-2 3 Stock 3-Brush Generator Gear and Tag Kit
8753-2 3 Allen includes gear, gear pin, gear end spring, oil
Generator Screw Kit (Phillips) for 1950-54 deflector, and brass tag.
2098-2 3 Stock VT No. 32-1877
692
2-Brush Generator Repair
Generator Rebuild Kit. Complete 2-Brush Generator Gear Kit is available
as shown, all small parts necessary as complete kit. Kits include13-tooth gear,
for rebuilding a 6 or 12 volt, 2-brush oil deflector, washer hex nut. Fits 1958-69
generator. 74 FL.
VT No. 32-0431 VT No. Item Fits
32-0204 32-0204 Kit BT
2-Brush Generator Components are available separately. 32-1363 Gear Servi
VT No. OEM Item
32-0164 30012-58 Bolt (2)
32-0220 Gear BT
32-0234 30426-58 Brush Set 32-1245 Spacer 5 pack
32-0231 29913-82 Brush Set, Hitachi Replica 2-Brush Field Coils feature warp-
12-0581 7634 Terminal Nut free laminates and heavy copper core wind-
12-2120 30280-58 Pole Screw ing. Set is matched pair with lead.
32-0209 30350-58 6 Volt Brush Holder
32-0210 30450-66 12 Volt Brush Holder
VT No. OEM Type Volt
13-0117 30453-58 Brush Spring, 10 pack 32-0229 30201-58A 58/61 6
12-0303 9007 Gear End Bearing 32-7599 30201-65 65 12
12-0304 9007 Gear End Bearing (Open) Generator Case Mount Gasket fits 1958-
CLASSIC
10-2553 30148-58 Brush End Cover Bushing 69. 2-brush.
12-0319 9064 Brush End Cover Bearing
VT No. U/M
12-0902 11004 Front End Retaining Ring
14-0112 30145-46A Shaft End Seal, 1958-81
15-0150 10
15-0565 2
Generator Parts.
Generator End Brush Band
VT No. Item Years
for 1966-80 2-Brush generators
32-0217 Oil Deflector 1958-81
32-0217 32-0219 replaces 30475-66 with bolt.
32-0219 Washer 1958-69
VT No. Finish
Generator Mounting Screws for Big Twin 32-0199 32-0200 32-0199 Chrome
1958-69 with Hex. 32-0200 Black
Chrome Cadmium Brush Style 32-0226 32-0222
7113-2 8153-2 8154-2 2 Stock
7113-2 2 Acorn
8754-2 2 Allen Replica Generator Armatures feature heavy copper wind-
42-0522 42-0406 ings on precision shafts with solid copper commutator. *Note:
Replica style.
VT No. OEM Volt Model Brand
32-0225 30851-61 6 1961-64 FL Accel
32-0226 30851-58 6 1958-60 FL V-Twin
42-0414 32-0222* 30851-65A 12 1965-69 FL V-Twin
Chrome Generator Covers. Generator Terminal Nuts replace 7634, on all
VT No. Model Years Type generators 1930-up, (10 pack).
42-0414 2-Brush 1958-81 End VT No. Type
42-0522 Hitachi 1982-84 End 12-0581 12-0572 Brass
42-0406 2-Brush 1958-81 Body Wrap 12-0581 Steel with star washer
Tech Tip: 12 V Upgrade Generator 2-Brush Hardware Kits include
gaskets and replacement hardware as shown.
VT No. 32-0227
2-Brush Generator Terminal Kits include

nuts and insulators. Fits 1958-69.
VT No. 2127-11
Use HeliCoil 16-0920

kit to convert 12 volt Generator 2-Brush Set fits 1958-69
generators with ⁵⁄₁₆ - 24 Replaces 30426-58.
thread to ¹⁄₄ - 24 thread VT No. 32-0234
to accept early mount
bolt set.
693
Generator
Regulator & Relay 32-0623 32-0621 32-0626 32-0995
32-1209
Replica Mechanical Regulators are for generator systems. Each
32-1310 unit features heavy duty shock mounted steel bases, vibration
32-0631 32-1079
resistant internal wire connections, fiber and Mylar insulated pads
Replica Delco Remy 1938-57 Brush Relay features original and large diameter contact surfaces.
internal points contact construction with embossed cover. Black Chrome OEM Brand Volt Type
VT No. Finish Cover — 32-0763 74510-47A VT 6 2 Brush
32-1310 Black Delco 32-1209 — Delco 6 2 Brush
32-0631 Black Delco 32-0623 32-0624 74510-47A Volt Tech 6 2 Brush
32-0739 Chrome Delco — 32-1340 Kit VT 6 2 Brush
Delco-RemyTM are
32-1200 Black Delco 32-0626 — 74511-65 Accel 12 Bosch Type
Wires used under license
32-0625 — 74511-65 Bosch 12 Bosch Zinc
32-1079 Black Delco Remy from General Motors. 32-0621 32-0622 74510-64 Accel 12 Delco Type
32-1319 Wire Positive 32-0995 — 74510-64 Delco 12 Replica
48-1477 Cloth Patch Delco Remy
32-0267 42-0404 42-0442 42-0403 42-0064
B
32-0067 A C
32-0056 Relay and Regulator Covers.

VT No. # Type Year Finish
6 Volt Solid State Relay includes cover, and allows use of 42-0404 A Relay 1932-57 Chrome
idiot light on all 3 brush generator applications 1926-57. 42-0053* Relay 1932-57 Black
VT No. OEM Year Brush Terminals Cover 42-0064* Relay 1932-57 Chrome 42-1047
32-0056 74750-38 1938-57 3 3 Chrome 42-0442 B Regulator 1947-63 Chrome
42-1048 Regulator 1947-63 Black 42-0539
32-2056 74750-38 1938-57 3 3 Black
32-0067 74750-32 1932-37 3 2 Chrome 42-1047* Replica 1947-63 Black
42-0403 C Regulator 1964-69 Chrome
32-0267 74750-32 1932-37 3 2 Black
42-0539* Replica 1964-69 Delco
32-0299 32-7750 *Note: Replica Delco Remy Style with embossment.
Solid State Generator Regulator features die-

cast chrome end cover which mounts to all 1965-
32-1545 77, 12 Volt, 2 brush generators. Small solid state
6 Volt Solid State Relay Eliminator replaces mechanical reg- regulators fits behind cover for a clean look.
ulator on 3 brush generators, 1937-57. No more sticking relays VT No. 32-7757
and moving parts to wear out. Instructions. Chrome Rectifier-Regulator Mount for 12 volt
VT No. Item/Finish Bosch generator.
32-0299 Relay Black VT No. 31-0593
32-7750 Relay Chrome
32-7560 Relay Only Chrome Solid State Regulator Mount bolts
32-1545 Replica Solid State Relay with Cover 32-7560 directly to 2-brush generator housings on Big
Twin and Sportster models. Fits Accel and
32-1341 V-Twin finned type regulators.
VT No. 31-0207
Chrome Replica 1958-69 FL Regulator
Bracket replace 74531-58.
32-0071
VT No. 31-0171
12 Volt “Look-A-Like” Relay is exact shape and size of 6 volt
relay and will mount the same as the 6 volt relay. Available with
electronic design or contact points style. For use with 12 volt
Circuit Breaker Screw are used to
2-brush generators. mount distributors and relay on 1936-
Chrome Black Type 64, 61, 74 and 80 models, (10 piece).
32-0071 32-1341 Electronic VT No. Finish
32-7586 32-7587 Points 8146-10 8146-10 Cadmium
8145-10 Chrome
Relay Mount is of cast aluminum to 9684-10 Parkerized
mount relay on 1936-57 Big Twin OHV. 7130-10 Acorn
Note: Must be welded on, drilled and
tapped.
VT No. 32-0063
694
Battery Carrier
42-9910 42-9912 42-9913
42-9909
Battery Carrier Kits fit stock frames with bracket and Iso-Mounts included as required. All units
are chrome except where noted. Order battery top cover and strap kit as noted separately.
VT No. Model/Year Cover Kit
42-9915 1965-69 FL 42-5516
42-9127 As Above, 42-5517
Battery Tray Only, no hardware included 42-9917
42-9909 1965-69 Black 42-5516
42-9910 1970-79 FLH 42-5517
42-9911 1980-84 FLH 42-5517 42-9127
42-9913 1971-78 FX, black 42-5515
CLASSIC
42-9912 1973-79 FXE 42-5518
42-9917 1980-85 FXE 42-5518 31-0164 31-4186 Chrome Battery Carrier Brackets.
Rubber Iso Mount has ¹⁄₄ - 20 VT No. Year Model
threads on each end. 31-0187 1965-84 FLH
VT No. Type Quantity 31-0940* 1965-85 FLH
28-0749 Hex 2 31-0187 31-0164 1973-84 FXE
28-0636 Lord 2 31-4186 1971-78 FX
*Note: Bright finish
Battery Box 1936-64
28-0749 28-0636
42-9916 42-1056
42-9987
42-1143
42-0910
42-9919 42-0760 42-0762

28-0545
53-0505
53-0791 28-0545
42-0565
42-9940
42-9918
12-0538
Replica 6 Volt Battery Hardware fits 1936-64 Big Twins.
Battery Extension Box houses 12 volt mini battery raising it VT No. Item Note
to the height of the H-2 6 volt battery. Use in wrap around oil 42-1056 1936-64 Complete Kit
tank to regain original height so battery rods may be used. Kit Includes rods, top, pads & terminal hardware
includes black box, rubber pads, rods and chrome top. Order 42-1143 1958-64 Complete Kit
battery separately 42-0760 Top Cover Black
VT No. Item 42-0762 Top Cover Chrome
42-9987 Kit 42-9918 1936-57 Rod Kit with replica with flags & pads
42-9916 Battery Box only 42-9940 1958-64 Rod Set, Bare Metal
53-0505 Battery only 12N5.5A-3B 12-0538 Wing Nuts 10 pack
42-0910 Chrome Battery Top Only 28-0545 Pad Set Rubber
42-9919 Chrome Rod Set 42-1375
28-0593 Pad Set Foam, 1929-64 Big Twin and 45"
53-0791 Battery Box Top
42-1375 Cover 1958-64 FL
42-0565 Battery Box Kit with 53-0791 cover 695
12 Volt Battery 53-0579 Champion
53-0517 53-0518
H-12 Battery fits electric start 1965-84 FLH, replaces 66006-65

and measures 8¹⁄₈” x 5¹⁄₄” x 6¹⁄₂”.Dry charged.
VT No. Brand
53-0502 53-0532 Champion/Super Crank
53-0579 Cap Set
Big Boar
Battery
53-0505 53-0527
12 Volt Battery fits 1973-91 FXE-FXR, 1984-90 FXST-FXWG 53-0700 53-0702
measures 7” x 4” x 6¹⁄₄”. Dry charged. Big Boar Batteries have high cold cranking amps, and a
VT No OEM Item replacement warranty. The 53-0700 battery is a totally sealed,
53-0502 65991-75C 12N16-4B V-Twin, 16 amp maintenance free battery. Measuring 6⁷⁄₈ long x 6¹⁄₁₆ high x 3⁵⁄₁₆
53-0517 Yuasa, Yumicron wide, and has been tested and proven on big inch and high
53-0518 Yuasa CX 19 amp compression engines. It has true 350 cold cranking amps.
1970-79 Kickstarter models. Dry charged. VT No. OEM AMP Fits
53-0504 12N7-4A 53-0700* 65991-82 350 FX 73-86, FXR 82-94, Softail 94
Custom application for Panhead-Knucklehead. Dry charged. 53-0702 “Mini” 6” Length x 5¹⁄₈” T x 3¹⁄₄” W
*Note: For custom application that have limited space. Starts
4¹⁄₁₆” x 3¹⁹⁄₃₂” x 4¹⁄₂”. Fits in 42-9916 Box
larger engines but does not have a lot of reserve. Multi-
53-0505 12N5.5A-3B V-Twin positional. Cold cranking 230.
53-0527 12N5.5A-3B Yuasa 12 Volt Antigravity Battery. 480 cold crank-
All dry charged batteries do not include electrolyte. Electrolyte (battery acid) is avail-
able at Tractor Supply stores, nationwide. ing amps.
VT No.53-0075
6 Volt Battery
53-0795 Top
53-0795
53-0520 53-0529
H-2 Battery replaces 66006-29F for 1936-64 Big Twin 1929-63
Note: Do not over fill, fill to cover top of plates only as per instructions provided. This 45. Dry charged.
battery vents through the caps.There is No Warranty on Leakage due to over filling. VT No. Item
Replica 6 Volt Batteries feature black cases and correct size 53-0795 V-Twin Black does not include vent tube,
terminals as original. Batteries are stock style without vent. Dry vents through caps
charged. 53-0566 Top Plug Set
VT No. OEM Fits 32-1808 Ground Wire
53-0520 66001-47 H-3 measures 4³⁄₁₆” x 3⁹⁄₁₆” x 5³⁄₈”
K and XL 6 Volt Universal Battery. Dry charged.
53-0529 4303-26 1930-36 VL, H-1, 3⁷⁄₈” W x 6⁵⁄₈” L x 6¹⁄₂” H Measures 4⁵⁄₈” x 3¹⁄₈” x 6⁵⁄₁₆”.
VT No. 53-0524
6 Volt 18 Amp Sealed Maintenance Free Battery
measures 6¹⁄₂” tall and 3¹⁄₂” wide. Battery has spade
type top terminals can be used as H2 replacement but
will require shimming by installer.
6 Volt Item
53-0570 Battery
49-1555 Box for Wrap Around Tanks
All dry charged batteries do not include electrolyte. Electrolyte (battery acid) is avail-
53-0570 able at Tractor Supply stores, nationwide.
Warranty and Adjustment Policy
This battery will be replaced without charge if found to be defective in materials or workmanship 6 months from date of over-the counter purchase. After 6 months but within 12 months of over-the
counter purchase, the battery will be replaced and the purchaser charged only for the period of ownership based on the regular price at the time of return prorated over the number of months of
warranty. This warranty is available through the dealer to the original retail customer and is not transferrable and is voided by the use of rejuvenators, improper electrolyte, neglect or abuse.
696
Battery Hardware
Battery Hardware, bolt kit replaces 66000-80
bolt, nut, and spacer for 1973-up FXE-FXR.
VT No. Item
37-8867 Nut, Bolt and Spacer, 5 pack
37-8933 Vent Clamp, 50 pack, 10067 7615-4 7615-4T 48-0822
32-0517 Vent Tube with Clamp 1926-64 6 Volt Battery Terminal Bolt Kit with felt washers.
VT No. Item
Battery Terminal Kit is for models with 7615-4 Kit
6 volt H-2 battery. 7615-4T Kit with pads
Fits 1936-1952 EL, and 1941-1964 FL. 48-0822 Caution Tag
VT No. 32-1284
Cables
Battery Cable Assortment. Ground
CLASSIC
cable assortment is heavy duty replace-
ment type, includes five pieces of the
most popular numbers. VT No. 32-0317 32-1419 32-1418
Replacement Battery Cables are replacements of the Volt Tech Flexible Battery Cables feature a 4 gauge cable
originals with heat shielded terminal ends. manufactured with pure electrolytic-grade 36 gauge tinned cop-
VT No. OEM Length Fits/Ground per strands for maximum current transfer and flexibility and a
32-0311 70097-75A 10³⁄₄” 1982-84 FXR specially rated 125° C, oil and gas resistant, ultra-flexible trans-
32-0331 70186-82 8¹⁄₂” 1982-92 FLT lucent jacket in either black or clear.
1987-up FXR Clear Black Length
32-0314 70209-65A 8¹⁄₂” 1967-85 FL Clear Black Length
32-1418 32-1419 7”
32-0313 70313-71 10¹⁄₄” 1971-78 FX 32-1422 32-1423 15”
Positive 32-1400 32-1409 8”
32-1404 32-1413 16”
32-0310 70069-65B 15¹⁄₂” Solenoid to Battery and Starter 32-1401 32-1410 10”
32-1405 32-1414 19”
1971-85 All FX, 1984-85 FXST 32-1420 32-1421 11”
32-1406 32-1415 25”
65-85 FLH Positive to Solenoid 32-1402 32-1411 12”
32-1407 32-1416 30”
82-88 FXR 32-1403 32-1412 14”
32-1408 32-1417 33”
32-0316 70069-83 15³⁄₄” Solenoid to Starter
1983-84 all FX, Battery Terminal Hardware Kit includes
1984 FXST, 83-85 FLH pieces to simplify battery installations on
Battery Pad Kits include bottom and FXE and late XL models.
cover pads. Electric start. VT No. 32-0235
VT No. Fits Battery
28-0624 FL-FLH H-12
28-0623 FXE 12N164B
Rubber Battery Pad Set replaces 66103- Extreme Duty Battery Cable
74 on FXE. Set can be cut down for smaller Set. These #2 gauge wires are
applications. VT No. 28-0539 very fat and flexible. The bat-
tery cables will transfer more
Replacement Battery Top Foam Pads, sold cranking power with the very
as a 10 pack. least amount of voltage drop. Over 2000 bare strands of copper
VT No. 28-0626 are covered with special vinyl insulation that is covered by a
synthetic thermo-rubber jacket. Sealed and insulated with black
heat shrink tubing means no moisture will get in these cables.
VT No. Cable Lengths
32-2007 10” and 12”
697
Battery Side Cover
42-0010 42-0508 42-0501 42-0502 42-0505

Battery Side Covers.
42-0097 42-0714
Chrome Black Fits/Type
1965-84 FLH
42-0010 1965-69 FL-FLH Ribbed
42-0508 1970-84 FL-FLH Ribbed
42-0499 1970-84 FL-FLH Smooth
42-0507 1970-84 FL-FLH Louvered
1973-85 FXE-FXEF-FXS-FXB-FXWG
42-1164 42-0502 Square View Holes
42-0501 Single Slot View Hole
42-0500 Louvered
42-0543
42-0097 Louvered with Square View Hole
42-0714 42-1164 Embossed
1970-84 FX Kick Starter Only
42-0505 Single Slot View Hole
42-0542 42-0003 Louvered
42-0546
42-0524
42-0544
Replacement Battery Straps
Chrome Battery Cover Kit includes both top and side covers VT No. Fits
with correct stainless steel strap. Note style of side cover. 28-2217 1984-92 FXST, FLST, 1980-up FLT, FLTC
VT No. Year Model Style 42-0517 1970-85 FL, FLH
42-0542 1970-78 FX Slotted 42-0515 1971-80 FX, Kick only
42-0543 1973-84 FXE-FXS Square 42-0524 1973-85 FXE, FXWG, FXSB, FXEF
42-0546 1970-84 FLH Ribbed 42-0516 1965-69 FL, FLH
42-0544 1965-69 FLH Ribbed
Top Cover
42-5516
42-0510 42-0512 42-0511

Battery Top Covers. 42-5515
Chrome Black Year Model
42-0510 42-0570 1965-84 FLH
42-0512 42-0571 1971-84 FX
42-0511 42-0566 1973-84 FXE
42-5518
42-5517
Battery Top Cover and Strap Kit. Save time by ordering the
proper cover and hold down strap, display packaged.
42-5515 1970-78 FX Kick
42-5516 1965-69 FLH Electric
42-5517 1970-84 FLH Electric
698 42-5518 1973-84 FXE Electric
Air Cleaner
34-0545 34-0707
34-1293 34-1295
Bendix/Keihin Carburetor Cover is 3 bolt style and made of Chrome Air Cleaner Covers Only fit S&S carburetor stock
alloy. backing plate and filter, “bolt on” type.
VT No. Style VT No. Style Fits Super
34-1293 Finned 34-0545 Eagle Spirit Chrome B
34-1295 Rocket 34-0707 Skull E
34-0709 Maltese E
34-1372
34-0981
CLASSIC
34-0406
Installed
Chrome S&S Super E Air Cleaners Replacement Covers

7” Round Air Cleaner Assemblies. only.
Chrome Black Type VT No. Item/Fits
34-1372 34-0408* Bendix/Keihin 34-0981 Chrome Cover All Super ‘E’
34-0743 — Cover Only 34-0560 34-1063 As Above with Notched Cover for 5 Gallon Tanks
8” Round Air Cleaner Assemblies. 34-0984 Uni Filter Foam Air Filter Super ‘E’ Foam Type
34-0047 — Bendix 9980-3 Chrome Allen Screw Set for S&S Covers
— 34-0407 Bendix/Keihin Chrome Alloy Velocity Stacks.
6” Chrome Dome VT No. Fits Length
34-0283 Keihin 34-1102 S&S “E & G” 4”
34-0482 Zinc Air Cleaner Bracket 34-1107 S&S “D” 4”
34-0560 — Mount Gasket Kit 34-1108 S&S “E & G” 2.5”
*Note: Features Bobber Style Cover 34-1103 Bendix/Keihin 2.5”
15-0885 Bendix Gasket
34-0532 34-0528 34-1159 Screen
Chrome Air Cleaner Support

Brackets are for installing the
34-0544 custom round or teardrop air
34-0631 34-0527 Installed 34-0202 cleaners.
34-0205 VT No. Fits
34-0205* 1967-84
34-0202 1966-84 Shovelhead
*Note: For S&S air cleaners and
carburetor support.
Teardrop Air Cleaners. Order bracket set separately.

Pre-1987 with Bendix Keihin Carburetor.
VT No. Style
34-0532 Eagle Spirit, Chrome, Bendix Keihin
34-0544 Eagle Spirit Gold
34-0515 Smooth Polished
34-0520 Smooth Chrome Steel
34-0527 Smooth Chrome with Flames
34-0528 Finned Chrome
34-0631 Slotted Chrome
Individual Parts For Above Units
34-0518 Chrome Cover only
34-0519 Bendix Keihin Backing Plate
34-1320 Bendix Backing Plate
37-8556 Chrome Three piece screw kit
34-0545 Eagle Spirit Chrome Cover only
34-0905 Uni-filter Element only
34-0916 Foam Filter Element
34-0251 Filter
Brackets For Tear Drop Air Cleaners.
34-0202 1974-80 Big Twin Shovel
699
Air Cleaner 34-0040
34-1292 34-1318
Assembled Assembled
34-0501
34-0506
Air Cleaners include elements.
Chrome Black Element Fits Type
34-0501 34-1325 34-0079 Bendix-Keihin Mesh Dome
34-0733 — 34-0079 S&S “E” Mesh Dome
Air Cleaner fits Keihin and Bendix carburetors. Includes 34-0040 34-1370 34-0078 Bendix-Keihin Mesh Oblong
chrome cover, element and backing plate. Order brackets sep- 34-0506 — 34-0906 Bendix-Keihin Chrome Dome
arately as required.
Chrome Black 34-0510 34-0512
34-1292 34-1318 Smooth
34-0977 Foam Element only
34-0977
A Smooth
34-0524
B
5³⁄₄”Chrome Air Cleaners are for all Bendix and Keihin three
bolt carburetors. Includes foam washable element, 2¹⁄₄” thick.
Chrome Black Item
34-0510 34-0010 Drilled
34-0512 34-1419 Smooth
V-Logo 34-0915 34-0915 Element Only
34-0555
7” 34-0526
7” Air Cleaner Assemblies with center screw cover fits

Bendix, Keihin carburetors. Features backing plate and 3” thick 34-0961
foam element.
Bendix # Cover Type
34-0505 A Assembly V-Logo
34-0547 B Assembly Smooth
34-0524 A Chrome Eagle Spirit 34-0475
34-1043 Bendix Backing Plate Only
34-0905 Uni Filter foam filter Inside 34-1248
34-0916 V-Twin Foam Filter
34-1277 Washable Filter
34-1041 7” Smooth Air Cleaner Cover 34-0930
Outside 8212-3
34-1042 7” V-Logo Air Cleaner Cover
34-0555 Eagle Spirit Cover Only Original Style Oval Chrome Air Cleaner includes element,
cover, screws and backing plate, fits Bendix and Keihin carbure-
tors only.
VT No. Item
34-0526 Complete Assembly, Bendix
34-0924 Complete Assembly, Keihin
34-0961 Complete, K&N, 1971-77 FX 34-0900
34-0900 Element (Uni)
Dome Air Cleaner 34-1248 Element (V-Twin)
VT No. Item/Fits 34-0559 Cover only, Chrome
34-0117 Dome Assembly, Bendix & Keihin carbs 34-0930 Backing Plate Only, Keihin and Bendix
34-0118 Dome Assembly, CV Keihin carb 8212-3 Cover Screws Chrome
34-0481 6" Backing Plate, Zinc plated 2323-6 Mount Kit
34-0560 Mount Kit
Black Oval Air Cleaner Insert.
34-0432
VT No. 34-0432
FX-FLH Air Cleaner Support Bracket replaces

29018-71A. Fits 1971-84 FX-FLH Shovelhead models.
VT No. 31-0128
700
34-0466 34-0620
Air Cleaner & Filter
34-0599
Chrome
Black
Early Style Carburetor Breather Snoots feature cover without filter.

34-0560 Bendix Keihin and CV is 3 bolt pattern. CV requires use of 35-0125 for
2000-up Big Twin or 35-0122 for 1993-99 Big Twin.
V-ChargerTM Chrome Air Cleaner features air scoop “blower” Chrome Black Type Year
design and includes a built-in chrome screen and filter element. 34-1331 34-1450 CV Kit 1991-06 XL
VT No. Carb Type Cover 34-1046 34-1449 Bendix-Keihin All
34-0466 S&S "B" Smooth 34-1045 34-1448 Linkert 1941-65
CLASSIC
34-0599 Bendix Keihin Smooth 34-1081 34-1398 CV 1998-up Big Twin
34-0620 S&S E Smooth 34-1253 S&S 1984-92
34-1254 S&S 1993-17
34-0560 Mount Kit All
34-0659 34-1332 Cover Only
Maltese Carburetor Cover and Backing Chrome Maltese Air Cleaner
Plate. Center portion of cross has a matte Kit includes backing plate, filter,
finish. Order filter and brackets separately. cover and bracket as required
Chrome Polish Carburetor Type to fit stock original carburetor.
34-0608 Bendix-Keihin The center portion of the cover
34-0610 S&S ‘E’ is matte chrome finish. Fits
34-1168 34-1168 Replacement Filter 1966-85 Big Twin with Bendix
34-1130 Cover only Caburetor.
VT No. 34-1149
Replica Air Filter

34-0251 34-1248 Replica Paper Air Filters feature original shape
and styling for exact fit. Washable construction.
34-1176
VT No. OEM Fits
34-0935
34-0935 — S&S Type, Round B Series
34-1176 — S&S ‘E’ & ‘G’
34-0251 — S&S ‘E’ & ‘G’
34-1248 29036-72 1967-75 FL, FX
Air Filters are available in three types; K&N paper, Uni Filter foam and Accel 2-stage foam. All have
34-1010 screen insert.
K&N Accel Uni-Foam OEM Fits
For Aftermarket Models
34-0960 — 34-0905 — S & S Super ‘B’
— — 34-0916 — As Above, Import, S & S & 7” Round Style
34-1010 — 34-0984 — S & S Super ‘E’ & ‘G’
— — 34-0906 — 34-0506, 34-0508
— — 34-0915 29085-81 34-0510
— — 34-0977 — New Era
34-0975 34-1009 — — — Mikuni HSR-40 smooth bore
34-1040 — — 29055-89 Screamin’ Eagle Round
34-1066* — — 29025-88B As Above, Oblong *Note: OE Brand
For Big Twin Models
— — 34-0912 29288-83 1983-85 FLT-FLHT
34-0954 — 34-0903 29255-78 1982-83 FXR, Late1978-81 FX-FL
34-0953 — 34-0902 29036-75 1977-E78 FX FL
34-0952 34-0967 34-0901 29036-73 Late1976-78 FX-FL
34-0951 — 34-0900 29036-72 1967-75 FX-FL-FL
701
6" Linkert Air 49-0834 49-0834
Installed
Cleaners
34-1033
Linkert Choke Cable Assembly includes cable, knob and

cable bracket, carb arm for carburetor and hardware. Fits cat-
34-1050 eye, two and three lite dash panels. Order 35-1065 choke shaft
for OHV application.
VT No. 49-0834
6” Air Cleaner
Instruction Tag fits
6” Smooth J-Slot Cover round air cleaner covers.
VT No. 34-0778 VT No. 49-0643
34-1055
Close-Up of “1939 World

34-1004 34-0580 Fair” Logo
Raw World’s Fair Cover
VT No. 34-0047
34-1388
34-1465
34-1396
Linkert Custom Air Cleaner

Assemblies with chrome cover
and backing plate. Fits all 4 bolt
34-0282 Linkert carbs. Does not include
6” "J" Slot Type Air Cleaner or use air filter element.
VT No. Item Finish VT No. Style
34-1033 NY World's Fair Complete Chrome
34-1050 Smooth Complete Chrome
34-1388 Teardrop
34-1055 Smooth Complete Raw 34-1396 Diamond
34-1297 Logo Complete Raw 34-1397 Rodan
34-1004 Backing Plate Only Zinc
34-1680 Backing Plate Only Parkerized 34-1680
34-0481 Backing Plate Only Zinc 34-1388 Installed
34-0580 Backing Plate Kit Zinc
with copper mesh 34-1297
34-0462 NY World's Fair Cover Only Chrome
34-1886 Smooth Cover Only Chrome
34-0047 NY World's Fair Cover Only Raw
34-0945S Smooth Cover Only Raw
34-0778 Smooth Dome Cover Chrome
34-1890 Smooth Dome Cover Raw
34-0048 Logo Cover Raw
34-0780 Smooth Dome Cover "36" Style Raw
13-9245 Spring only, Coiled Raw 34-1424
6" 1936 Type features 4 screw holes for attaching cover.
34-0282 Smooth Dome Chrome Cast Breather Snoot.
34-0495 Smooth Cover Only Raw
VT No. 34-1424
34-0420 Smooth Raw
34-0492 Backing Plate Only Parkerized
6" Replacement Mesh Elements 34-0492
34-1465 Copper Mesh Roll (Set of 4)
34-1840 Copper Mesh
702
7" Linkert Air Cleaner
34-1359
Logo Detail for NYWF
V-Logo
34-1049 13-9167 V-Logo Smooth
7” Center Screw Air Cleaner for Linkert features steel back-
ing plate with four mounting holes, chrome cover and foam
element.
34-1034 34-0907
VT No. Style Type
34-1247 34-0624 34-1233 34-1323 34-1025 Smooth Air Cleaner Complete
34-0543 Backing Plate Only Zinc Plated
34-1042 V-Logo Cover Only Chrome
34-1380 Bobber Cover Only Black
CLASSIC
34-0497 H-D Complete
Chrome J-Slot Air Cleaners feature a unique four pin cover 34-0712 Backing Plate Parkerized Replica
mounting, with internal spring to fit four bolt Linkert types and 34-0990 Steel Backing Plate Zinc Plated
include copper element. Available with smooth, V-Design or 37-2096 Screws, 5 pack Chrome
7”
1939 World’s Fair logo from original
1939-40 accessory design to
commemorate the fair.
7” Type Cover
VT No. Item Finish
34-1049 Smooth, complete Chrome 34-1308 34-0950 34-0904 34-0916 34-1277
34-1359 Bird, complete, left Chrome Filters Only
34-1323 Smooth, complete Raw 34-0950 K&N
34-1034 NYWF, Complete Chrome 34-0904 Uni
34-1442 Smooth Complete Chrome 34-0916 Foam
34-1447 Smooth Complete Stainless 34-1277 Cycovator
34-0499 Backing Plate only Zinc Plated 34-1679 Foam 34-1679
34-0624 Backing Plate Only Parkerized
34-0907 Copper Mesh only 34-1333
13-9167 Spring only Raw
13-9152 Spring only Parkerized
Covers Only Linkert Breather Snoots
34-1233 Bird, Right Chrome feature chrome cover
without filter. Linkert four
34-1308 Smooth, Right & Left Chrome bolt types for Side Valve
34-1333 World’s Fair, Right & Left Chrome for Left Side mounting,
34-1247 Bird, Left Chrome Right Side, OHV Mount.
34-1342 Cover Stainless 34-1531 Chrome Black Type
34-1079 SV
Mesh Element. Original type of 34-1045 34-1045 34-1448 OHV
woven copper replaces 29036-41, Installed 34-0659 Cover
spring replaces 29040-41 on J-slot
type.
VT No. Type
34-1563 Copper Mesh Kit 34-0271
34-1563
34-0907 Copper Mesh Only
with Core Linkert Air Cleaner Mount Hardware Kits include steel
34-0907 Copper Mesh Element locks. Support bracket secures center screw cover to 4 bolt
13-9167 Spring each backing plate.
VT No. # OEM Item Year
49-0377 7” Air Cleaner Instruction Tag fits 34-0206 A 29050-56 Support Bracket All
round air cleaner covers. 9017-5 B 29155-36 Screw Kit 1936-55
VT No. Item 9682-5 B 29155-36 As Above, Parkerized 1940-55
49-0377 Tag 9682-5T B 29155-36 As Above, Parkerized 1940-55
34-1710 Rivets 7821-6 C 29060-56 Screw Kit 1956-65
Air Vortex fits 4-bolt 7821-6T C 29060-56 Screw Kit 1956-65
Linkert J Slot backing 34-0271 Kit Mount 1956-65
plates. Use smoother air 15-1581 Gasket
49-0657 flow. VT No. 49-0657
Linkert
34-0627 Air Cleaner Polished
34-1448 Air Cleaner Snoot
703
Bird Deflectors 34-1203
34-1384
34-1203 34-1384
Installed Installed 34-1381
34-1383 34-0443
34-1240
34-1883
34-1383 34-1381 Linkert Bird Deflectors.

Installed Installed VT No. Type 49-0633
34-0443 Rocket
34-1203 Antique chrome
34-1240 Oval Bronze Shield
34-1341 Teardrop
34-1381 Roth, smooth
34-0649 34-1883 34-1383 Oval Finned
Installed 34-1384 Roth Style Fins
34-1883 Spoon
34-0649 Set of 6
34-0443 35-0954 Carburetor Turbulator
Installed or Atomizer for
Linkerts bolts to 4 bolt
brass carburetors.
34-1240 VT No. Item
Installed 35-0954 Atomizer
Linkert Detent Ball Tool will fix ball and spring for detent on
needle and choke. VT No. 16-0564
34-1296 Installed
34-1296
Carburetor Scoop Bolts to 4-Bolt Linkert Carburetors. Fits
1941-65 FL, 1936-52 EL, 1936-52 G.
VT No. Finish
34-1360 Polished Kit
34-1296 Polish
34-1359 15-0145 Gasket Kit
Chrome Air Cleaner Assembly includes backing plate and
element for left side.
VT No. Item Side
34-1034 Assembly World’s Fair
34-1359 Assembly Bird
34-0907 Copper Mesh Element
Cover Only
34-1333 World’s Fair, Chrome Right and Left
34-1301 installed
with 34-1341 chrome 1940 style plain emblem
34-1937 34-1938 Linkert Teardrop Carburetor
Cover Kit includes a mount
1936 Knucklehead Air Cleaner As-
base with hardware and tank
sembly is reproduced in the exact 34-1341 emblem shaped cover. As
shape and configuration used on
seen on 1947 Knucklehead!
1936 EL Knucklehead models. Kit 34-1301
VT No. Item
includes ribbed cover and backing
plate to fit Linkert carburetors.
34-1341 Mount
VT No. Finish
38-0943 Chrome Emblem
34-1937 Patina Chrome
38-0924 Parkerized Emblem
34-1938 Raw
704
Linkert
49-0635
49-0635
49-0631 49-0631
49-0633
35-0082
49-0633
Got a Bare Brass Linkert Body
49-0398
We Can Rebuild It!
CLASSIC
Watch Our Video!
user/TeddCycle 49-0635
Linkert
M74
Replica Linkert Carburetor is completely assembled with all

VT No.
internals with brass body. *Note: Without throttle arm.
60-0188 VT No. VT No. Model Type Year
60-0148 49-0631 M88 45 SV 1941-52
49-0266* M88 45 SV 1941-52
35-0634 M41 45 SV 1941-45
49-0633 M51L Big Twin SV 1937-48
49-0398* M51L Side Valve 1936-48
35-0654 M5 Big Twin 61" 1936-40 EL
35-0082 M74 Big Twin 1948-65
49-0635 M51 Big Twin SV 1937-48
35-1350 Bonn Indian Chief 1935-53
Linkert Rebuild Service. Parts billed separately as required. 48-0926 Can
Model Size Rebuild Linkert Hand Tool Tap, Linkert Rebuild Kits
Service sold each. VT No. Size OEM
M74 1¹⁄₂” 60-0148 16-1402 Thread VT No. 35-7133 1" 27133-36
M88 1¹⁄₄” 60-0188 35-7132 1 1/4" 27132-36
M88 60-0188 10-32 16-1400
M88 12-24 16-1401 35-7134 1 1/2" 27134-41
M88I 1¹⁄₄” 60-0147 ¹⁄₄ x 40 16-1402
M51L 1¹⁄₄” 60-0144 ⁵⁄₁₆ x 18 16-1403
M51L 60-0143
⁵⁄₁₆ x 32 16-1404
M51L
M35 1¹⁄₂” 60-0146 Kit 16-1405
M18 1” 60-0145
M18
M41 1⁵⁄₁₆” 60-0188
Linkert Drill Service Kit as original. Full 49-0635 Installed on Knucklehead Motor
instructions for this on our website. Tool kit
with drill pivots. Drill bit sizes include #55 29-1115
(1.3mm), #53 (1.5mm), #56 (1.2mm), #42 Installed
(2.3mm), #72 (0.6mm). The #55 drill bit is
used by two different length handles. Slot
tool blade sizes include .017” and .009” for
all carburetors. VT No. 16-0563
Linkert Tool Kit includes 6 special drills
with brass knurled handles, 2 idle shot tools,
1 venturi tool, and 5 taps for use on brass
linkert carburetor bodies, all years.
VT No. 16-1405
705
Replica Linkert
Carburetor Hardware
VT No. OEM Item
35-0482 27370-33 Early Float Bowl, All Side Valve
35-0885 27043-41 45” WLA Spacer
35-0511 27215-33 Choke Shaft, 45” and SV BT
35-1254 27218-36 Choke Shaft OHV
35-0488 27218-36 Choke Shaft BT 1936-47 All
35-1065 27218-48 Choke Shaft OHV
35-0493 27219-36 Air Intake Shaft Stop 35-0511
35-0940 1232-24 Choke Disc
35-9251 27225-24 Choke Disc, 1930-47 1¹⁄₂”
35-0489 27225-48 Choke Disc Big Twin
N/A 1238-33 Lever, VL 1933-36
35-9081 27252-37 Lever, ULH 1937-48, WL 1937-52
35-0483 27260-40 Lever, 1940-47 OHV 35-0445
35-0750 Cadmium Lever, 1940-47 OHV
35-0445 1238-36 Lever, 1936-39 OHV
35-0784 Cadmium Lever, 1940-47 OHV
35-0495 27260-49 Throttle Lever Bracket BT
27265-49A With Arm, Set 1948-65 OHV
31-1257 27265-49A Arm Only 1948-65 OHV 35-0490 35-0482 35-0546
13-9241 27270-49 Lever Screw Spring 35-0861
35-0491
35-9062 27275-26 Throttle Shaft, 1”
35-9056
35-9060 27275-24 Throttle Shaft, 1¹⁄₄”
35-9152 27276-40 Throttle Shaft BT, 1¹⁄₂”
35-9059
35-9192 27276-40A Throttle Shaft BT, 1¹⁄₂”
35-0958 27280-34 Throttle door, 1” #12 35-0582 27371-36 Bowl Late Big Twin
35-9061 27280-24 Throttle door, 45”, 1¹⁄₄” #13 without drain screw hole 35-0495
35-0860 27280-24A Throttle door, 45”, 1¹/₂” O.S. +0.030 35-0490 27371-36 Float Bowl Big Twin
35-0679 27280-40 Throttle door, 61”, #12 with drain screw hole
35-0861 27280-40A Throttle door, 61”, 1¹/₂” O.S. +0.025 35-0241 — Late Float Bowl Pins
35-0492 27280-51 Throttle disc (9-X) BT 1¹⁄₂” 35-0551 27375-29 Lock Nut, Chrome 35-0822
35-0862 — Throttle disc Oversize +.030 35-0853 27375-29 Lock Nut, Zinc
10-0742 27290-24 Shaft Bushing Set 8901-4 27375-29 Lock Nut, Chrome
35-0473 27290-24 Nylon Shaft Bushing Set 35-0488 8902-4 27375-29 Lock Nut, Cadmium
35-0474 27290-24 Nylon Shaft Bushing Set 15-0232 27376-28 Nut Gasket
13-0157 27291-32 Shaft spring 35-9065 27377-39 Bowl Drain Screw
35-0999 27297-27 HS Needle Valve 15-0761 — Washer for Above
35-9098 27297-27 HS Needle Valve, 45”, BT 35-9062 35-4573 27380-50 Brass Float 35-0250
35-9109 — As Above, Oversize 35-0514 Cork Float
35-9045 27297-30 HS Needle M-18 35-0475 35-0284 Cork Float (5 pack) 35-0502
35-0460 27298-40 HS Needle, WLA, Fixed 35-0745 Black Armstrong Float
35-0599 1254-40 HS Needle Valve w/large head, 1940-50 BT 35-9153 27381-50 Replica Float Lever
35-0475 27297-40 HS Needle Valve w/small head, 1940-50 BT 35-9059 — Float Pivot Bolt and Nut
35-9055 27300-50 HS Needle Valve 1950-65 Big Twin 1941-65 OHV
35-0395 27304-40 Linkert Needle Valve Lock Screw 35-0502 27382-33 Needle and Seat
35-9121 27318-41 1941-43 45”,1941-54 Big Twin Fixed Jet 35-0545 — Needle and Seat
35-9122 27318-50 1951-65 Big Twin Fixed Jet #18 35-0822 27382-33 Needle and Seat Replica
35-9125 27318-51 1951-65 Big Twin Fixed Jet #19 35-0833 Viton Needle and Seat Replica
35-9064 27325-33 Idle Body Plugs ⁵⁄₁₆”, 5 pk 35-9063 27383-11 Float Pivot Pin with Caps 35-4573
2681-4 27325-33 Idle Body Hole Plug Kit, Brass Finish 35-9326 27383-11A Float Pin with Caps
35-0524 27327-24 Idle Passage Plug, 5 pk 35-9047 Kit Float Pin and Cap Set
35-0554 27327-24 Idle Passage Plug Set 35-0250 27390-33 Bowl Valve Cover Cap Brass
13-0156 27330-33 Nozzle Spring, 10 pk 2729-1 As Above Cad Plated 35-9153
35-0481 27331-33 Main Nozzle SV 1933-53 15-0534 — Cap Gasket
35-0478 27331-40 Main Nozzle OHV 1940-51 15-0304 27391-36 Bowl Gasket
35-0494 27332-50 Main nozzle Big Twin, 74B 35-9052 27395-27 Needle Valve Lever Kit
35-1066 — Main nozzle, Bomb Site 35-0781 Cadmium Needle Valve Lever Only
35-9056 27337-27 Low Speed Needle Valve, All 35-1000 Raw Needle Valve Lever Only 35-9054
2695-5 27337-27 Low Speed Needle Valve 35-9064 35-9054 27397-27 Valve Lever Shoulder Screw
2695-5T 27337-27 As Above, V-Twin 2598-1 27397-27 Valve Lever Shoulder Screw
2696-5 27337-27 Low Speed Needle Valve 14-0926 27402-33 Seat Gasket
35-0477 27340-33 1” Low Speed Needle Valve 13-0159 27405-26 Choke Detent Ball Spring
2707-5 27340-33 1” Low Speed Needle Valve 35-9070 27406-26 Detent Ball 35-0207
2707-5T 27340-33 As Above 15-0262 27412-48 Spacer Big Twin 35-9052
2708-5 27340-33 1” Low Speed Needle Valve 35-0207 27450-36 Cable Block End
35-9051 27345-41 Spring collar 2658-5 27450-36 Cable Bolt End Cad Plated
13-0158 27349-27 Needle Valve Spring 2664-5 — Cable Block End Oversize Cad Plated
2643-2 Needle Valve Spring & Collar Set
35-0491 27363-41 1⁵⁄₁₆” Venturi (M74B)
35-0546 27371-36 Bowl Late Big Twin
without drain screw hole
706
35-0563 35-0501 35-0552
Linkert Carburetor 35-0079
35-0078
35-0666 35-9175 35-0790
35-0045 35-0046
15-0545
Linkert Complete Carburetor Hardware Assembly Kit includes all

parts except body. Kit includes parts pictured.
VT No. Model Size Rebuild
Service 35-0049
35-0079 M74 1¹⁄₂” 60-0148
CLASSIC
35-0078 M88 1¹⁄₄” 60-0188
Linkert Overhaul Kit is complete with hardware. Includes needle and 35-0342 M88 60-0188
seat, float, bushings, springs, float pin and gaskets for 1933-65 models. 35-0263 M88
35-0081 M88I 1¹⁄₄” 60-0147
VT No. Item 35-0045 M51L 1¹⁄₄” 60-0144
35-0563 Kit with cork float, 35-0046 M51L 60-0143
35-0501 Kit with Linkert M foam float 35-0624 M51L
35-0190
35-0552 Kit with black foam float 35-0049 M35 1¹⁄₂” 60-0146
35-0666 Kit with foam float 35-0190 M18 1” 60-0145
35-0038 M18
35-9175 Kit with brass float 35-1941 M41 1⁵⁄₁₆” 60-0188
35-0790 Kit with nitrophyl float
35-0873 Kit with 18 pieces; black float, bushings, springs, float pin,
Linkert Machining Services. Machine
stainless steel needle, brass seat and a 3-bolt insulator spacer. shop services done on Linkert carb bod-
35-9194 Kit includes throttle shaft brass float, needle and seat, float, ies. Float bowl restoration.
bushings, springs, float pin, gasket, carburetor bowl large nut with stud, VT No. 60-0195
lock washer luck nut, and copper filled seal washer. Throttle Bore Truing allows installation
35-0553 Kit includes 1 1/2" throttle shaft, float bowl nut, and float of oversize throttle door.Body will be
lever. machined to fit correct oversize door.
35-0944 Linkert Carburetor Gasket Kit VT No. 60-0345
35-8009 Linkert kit does not have float. Throttle Bore Honing Service removes
Gasket Kit Onlyl minor imperfections for a smooth carb
bore.
14-0926 Gasket for Above VT No. 60-0122
15-0622 Gasket Kit, 3 and 4 Bolt
15-0545 Gasket Set Linkert Drill Service Kit as original. Full
15-0420 Gasket Set, 3 Bolt instructions for this on our website. Tool kit
15-1102 As Above, James with drill pivots. Drill bit sizes include #55
15-0629 Gasket Kit, 3 Bolt (1.3mm), #53 (1.5mm), #56 (1.2mm), #42
15-0304 Bowl Gasket, 1936-51, 5 pack
(2.3mm), #72 (0.6mm). The #55 drill bit is
15-0321 Bowl Gasket 1952-65
15-0232 Bowl Nut Gasket used by two different length handles. Slot
15-0262 Spacer tool blade sizes include .017” and .009” for
15-0538 Spacer Kit all carburetors.
15-1386 Spacer James VT No. 16-0563
35-0341 Complete Screw Kit Only Parkerized Carburetor Support Brackets
are replica for Linkert carburetors.
Taps used on Linkert. VT No. # OEM Year/Model
Taps for Body are: 9011-5 A 1110-33 1930-38 SV Big Twin
1. #10-32
2. #12-24
9012-5 B 1110-39 1939-48 SV Big Twin
3. 1/4 -40 9013-4 C 27432-36 1936-55 45
4. 5/16-18
5. 5/16-32 1941-65 Overhead Valve Big Twin Carburetor
Support Brackets are replica for Linkert carburetors.
Replace 27431-41.
VT No. Year Finish
Dash Mounted Choke Control 31-0194 1941-53 Chrome
Watch Our Video! 9010-5 9009-5 1941-53 Parkerized
http://www.youtube. 9010-5 1954-65 Parkerized (Pictured)
com/user/TeddCycle Linkert Rebuild Kits
VT No. Size OEM
35-7133 1" 27133-36
35-7132 1 1/4" 27132-36
35-7134 1 1/2" 27134-41
707
Linkert
Float Bowl Assembly includes bowl,
foam, nitrophyl float, arm and needle seat.
VT No. Item Fits 2328-1 35-1391 2332-1 35-0953
35-1452 Kit OHV
35-1452 Note: Drain Screw in float bowl
35-1460 Kit OHV
35-1455 Kit Side Valve
35-1264* Kit OHV 35-1395 2334-1 35-0491 2338-1
*Note: Includes lock nut w/ drain screw
35-0368.
35-1720
35-0884 35-0734 35-0949 2340-1

Venturis for Linkert Carburetors to fit all models 1930-65. These precision
machined aluminum venturis are made to exacting tolerances for perfect fit and
a new like performance. Available in stock size or oversize and also in bomb site
35-0281 type for performance applications.
35-1286 VT No. Colony OEM Venturi Model Carb Size
2328-1 27360-29 ⁷⁄₈” M4, M11, M16, and M18 1"
1265-29A
27361-30 1" M31, M42, M54, M54B 1¹⁄₄”
1265-30
35-1391 2332-1 27362-30, 1¹⁄₁₆” M2, M5, M21, M41, M51, 1¹⁄₄”
1265-30A M52, M55, M58, M64,
Float Bowl. Oversize Bean Pot Style. M65, M84, M97
VT No. Fits 35-0953 As Above Bomb Site Type 1¹⁄₄”
2822-1 Same As 2332-1 but +.025” oversized O.D. 1¹⁄₄”
35-1720 Kit includes bowl, hex cap, nitrophyl float, and float arm. 35-1395 2334-1 27363-30 1¹⁄₈” M41L, M51L 1¹⁄₄”
35-0281 1936-52 W 1265-30B
35-1286 1948-65 FL, EL 2336-1 27363-40 1¹⁄₈” M61B, M61,M36A, M36, 1¹⁄₂”
1933-65 Linkert Foam Float & Needle Valve 1265-40 M35, M35T, M35TP
Assembly. 2710-1 Same As 2336-1 but +.025” oversized O.D. 1¹⁄₂”
35-0491 2338-1 1⁵⁄₁₆” M74B, M74, M45A, M45 1¹⁄₂”
35-0734 Alloy Bomb Site 1¹⁄₂”
VT No. Needle 35-0949 Brass Bomb Site 1¹⁄₂”
35-0537 Viton Tip 2818-1 Same as 2338-8 but +.025” oversized O.D. 1¹⁄₂”
35-0000 Stainless Steel 35-0884 1¹⁄₈” Undersize Venturi for 1¹⁄₂”
installing 1¹⁄₂” four bolt carb
on UL models
2340-1 27364-41 ¹⁵⁄₁₆” M88, M90, M641 1¹⁄₄”
1265-41M
Venturi for Linkert Carbs used on Indian models.
VT No. Fits Used On
2465-1 41-48 Chief M-6, M-341, M-343, & M-344
35-0368 35-0366 2467-1 Chief 80” M-350, M-352 and M-Bonn
Linkert Carburetor Bowl Lock Nut with Drain for use on all 2465-1 2467-1
brass body Linkert carburetors. This bowl locknut has an allen 35-0851 35-1070 35-0836
screw drain plug machined into the locknut to allow float to be
drained without removal of bowl from carburetor. Also available
with needle and seat assembly allows water to drain without
removing the bowl.
VT No. Item
35-0368 Lock Nut Linkert Bomb Site Venturi fits all 1¹⁄₂” brass Linkert. Venturi
35-0366 Lock Nut with needle and seat press tool VT No. 16-1037 included.
Throttle Doors.
VT No. Type
VT No. OEM Fits Size
35-0851 Alloy
35-0958 27280-34 1” STD #12
35-1070 Brass
35-0492 27280-51 M74 1¹⁄₂” STD #9x
35-0836* Brass
35-0827 27280-51A M74 1¹⁄₂” .005 O.S.
*Note: Includes main nozzle
35-0828 27280-51B M74 1¹⁄₂” .010 O.S.
35-0829 M74 1¹⁄₂ .020 O.S. 2701-6 16-0563
16-1037
35-0862 27280-51C M74 1¹⁄₂” .030 O.S.
35-0679 27280-40 1¹⁄₂” STD #12
35-0861 27280-40A 1¹⁄₂” .035 O.S.
35-9061 27280-24 1¹⁄₄” STD #13 35-0862
35-0860 27280-24A 1¹⁄₄” .030 O.S. Linkert Venturi Press Tool Kit to remove and install Venturis
Visit LinkertCarb.com for more carb parts! in brass Linkert carburetor bodies.
Linkert Patch. VT No. Brand
VT No. 48-1343 16-1037 VT
2701-6 Colony
16-0563 Drill Kit
708
Linkert
Linkert Stuff Cad!
Linkert Patch.
VT No. 48-1343 35-0795 35-0753 31-1257
Linkert Throttle Shaft Kit with nylon throttle shaft bushings.
Throttle shaft is machined from solid brass. Kit includes throttle
shaft two nylon bushings and screws. VT No. 35-0693
Linkert Nylon Throttle Shaft
Bushing Kit includes bushings, Linkert Throttle Levers.
spring and screw kit. For use all Brass Cadmium OEM Fits Year
Linkert brass body carburetors. 35-0795 35-9081 27252-37 SV 1937-48 UL
VT No. 35-0345 1937-52 WL
35-0445 35-0784 1238-36 OHV 1936-39
35-0483 35-0780 27260-40 OHV 1940-47
35-1282
35-0753 27260-48 1948-65
Throttle Lever Base
CLASSIC
35-1281
31-1257 27265-49A Throttle Lever Arm 1948-65
Carburetor Cable Block attaches inner choke
or throttle cable to throttle arm. Includes throttle
cable block, screw and cotter pin.
35-1287 VT No. Type
35-0207 35-0207 Replica
2658-5 Cadmium
35-1285 2664-5 Oversize
Linkert Choke Rod Kit. Choke
Linkert Choke Shaft Kits. 35-0506
VT No. Fits rod and lever assembly used on
35-1281 1¹⁄₂” M74B Choke Rod Kit all Overhead Valve Big Twins with
35-1282 1¹⁄₄” M51, M88 Linkert style carburetor.
35-1285 1¹⁄₂” SV
35-1287* 1¹⁄₂” VT No. OEM Year
*Note: Includes extended lever to clear 7” air cleaner assem- 35-0872 Lever 1936-37
blies. 35-0534 Kit 1938-47
A B 35-0989 35-0506 Kit 1948-65
35-9138 27244-48 Rod 1948-65
35-0486 27244-40 Rod 1941-47
Linkert Snap Throttle Conversion Kit and Fuel Line Fitting. Choke Lever.
15-0262 is a 4 bolt insulator spacer. The 35-0504 throttle con-
VT No. OEM Item
version kit fits 1941-65 Overhead Valve models to use snap
throttle. The 7158-2 adapts flexible hose to carburetor fitting. 35-9134 27235-33 Lever, Side Valve
VT No. # Note Item 35-9323 27288-33 Lever, WLA
35-0504 A — Throttle Conversion Kit 35-9135 27251-24 Screw
35-9114 Throttle Conversion Bracket Only 35-9194 1233-33 Thumb Lever
35-9134
35-0989 Brass 90° Carb Fitting 35-0952 Thumb
7158-2 B — Carburetor Fitting
35-0832
35-0952
36-0934 36-0947
Linkert Snap Throttle Kit.
Taps used on Linkert.
VT No. Kit Throttle Only
Taps for Body are:
36-0934 ¹⁄₄ Turn 1. #10-32
36-0947 Standard 35-0071 2. #12-24
35-0832 ¹⁄₄ Turn 7/8" 3. 1/4 -40
35-0779 ¹⁄₄ Turn 1" 4. 5/16-18
5. 5/16-32
Linkert Carb.com
VT No. 48-1394
Dash Mounted Choke Control

Watch Our Video!
http://www.youtube.
com/user/TeddCycle
709
Bendix Carburetor Kit 35-0099 Bendix Carburetor Kit fits
Shovelhead engines 1966-84
FX and FL. Kit includes 38 mm
35-0060 35-0021 35-0022 Bendix carburetor with adjust-
able main jet, throttle handle
with grips, cable with bracket
and 7” round logo air cleaner
with support. Kit also includes
seal adapters to use on pre-
VT No. Year Model
1978 O-ring heads.
35-0099 1966-84 Shovel
Bendix Carburetor has 38mm Venturi and 40mm throat. Carburetor Flange Gaskets
Complete with choke, accelerator pump, and built-in return VT No. Type Fits
spring. This complete unit bolts onto all Big Twins from 1971- 15-1092 Flange 1965
75 as stock replacement. 15-1085 Flange 1971-1973
VT No. MM Type Cable Finish 35-4570
35-0021 38 Fixed Single Cast
35-0060 38 Adjustable Single Cast
35-0022* 40 Adjustable Dual Cast 35-0201
*Note: A new choke cable bracket and cable/knob assembly
will need to be fabricated for installation on Big Twins 1983-88 Bendix Repair Kit is complete as shown including accelera-
and 1986-89 XL. tor-pump for all 38 and 40mm, stock or adjustable jet carbure-
tors. Replaces 27132-71.
VT No. MM Brand
35-4570 38 Facet
Bendix Carburetor Replacement Parts. 35-0201 38 V-Twin
VT No. OEM Item Brand/Finish 35-9164 40 Facet
35-0507 27630-71 Float Facet Adjustable Main Jet Conversion Kit fits all Bendix
35-4577 27645-71 38mm Float bowl Facet, Plain carburetors.
35-9250 — 40mm Float bowl Facet, Plain VT No. Item
15-0147 27646-71 Bowl gasket 10 pack 35-0202 Jet Kit
35-0203 27762-71A Pump V-Twin 16-0865 Jet Tap ⁹⁄₃₂” — 32, Some early carburetors
35-9132 27389-71 Pump boot Accel require drilling and tapping for jet installation.
13-9242 27659-71 Float Pin Spring 10 pack
35-0424 — Float Needle 38mm Bendix Main Jets.
35-0425 — Float Needle 40mm VT No. OEM Size
35-0533 — Idle Jet Tube 35-9143 27651-75 .095
35-9146 27655-75 1.15
12-2557 27271-71 Throttle Stop Screw 35-9144 27652 75 1.00
35-9147 27656-75 1.20
13-9223 27613-71 Throttle Stop Screw Spring 35-9145 27653-75 1.05
14-0520 O-ring 10 pack
35-0198 27654-75 1.10
Idle Adjusting Screw allows for the ease of
adjustment with the “T” handle design.
VT No. 35-0221 1957-66 Linkert DC Carburetor Complete Kit
includes bowl and body gaskets, sealing washer,
small springs and screws.
Tillotson
VT No. Item
15-0628 Small Gasket Kit
1967-70 Tillotson Carburetor Gasket and Hardware 1967-72 DC 2 Carburetor Hardware Kit
Kit includes 27806-66 gasket, 27816-66 diaphragm, two 35-0925 Kit
27689-61 idle and intermediate adjuster screw spring,
35-1063
27706-66 throttle shaft spring, 27691-66 throttle lever 2465-1 2467-1 35-0997
stop screw spring and six diaphragm cover screws.
35-0229 VT No. Item
35-0275 Carb Parts Kit includes fuel inlet, adjustable
needle kit, tickler kit, idle mixture screw, base pump,
needle and seat, gasket and hardware kit. 49-4133
35-0223 Carburetor & Gasket and Hardware Kit
35-0229 Kit with Accelerator Pump, Intermediate
Adjuster Screw, Needle and Seat Linkert Parts for Indian
35-0226 Needle and Seat VT No. OEM Item
35-0225
35-0224 Intermediate Adjuster Screw 2465-1 41-48 Chief M-6, M-341, M-343, and M-34 Venturi
13-9215 Inlet Valve Lever Spring 2467-1 Chief 80” M-350, M-352 and M-Bonn Venturi
13-9216 Idle Adjuster Spring 35-0997 102716 1/8" NPT Needle and Seat
35-1258 Adjustable Knob
35-0986 102457 Main Nozzle Choke Lever
35-1259 Fuel Fitting
13-9217 Throttle Lever Stop Screw Spring 49-4133 Choke Lever
13-0230 Throttle Shaft Spring
35-0262 Installed
35-0262 Adjustable Jet Kit
35-0225 Pump Assembly Kit
35-0348 35-0349 Diaphragm cover plug
35-0264 Carb Gasket and Hardware Kit
35-0265 Carb Gasket and Hardware Kit
35-0365 Tickler
35-0348 Diaphragm Base Cover
710
VT No.
35-0220
Installed
Keihin and CV Idle
Screw allows for easier
adjustment by hand.
Keihin Carburetor
VT No. 35-0220
Keihin Allen Screw Kit
includes chrome allen 35-1972 35-0179
screws as required on ThunderJet Accelerator Jet and Accessories mounts in
1976-89. all Bendix-Keihin, S&S, Flowmaster, Tillotson, and CV car-
VT No. 35-0206 buretors. Choke must be deleted for use. Works on Venturi
vacuum principle as third jet. Extra jets included.
VT No. Type
35-1972 ThunderJet Bendix Keihin, S&S E series
35-0179 ThunderJet for S&S G and D carburetor
35-9244 Replacement Fuel Tube
35-9172 35-9279 Keihin Low Speed Jets fit 1976-89 Keihin
35-9176 carbs, except CV.
Deluxe Carburetor Kits include pieces shown for 1976-89 VT No. OEM MM
Keihin carbs. 35-0297 27896-79 .65
CLASSIC
VT No. Type 35-0294 27894-78 .68
35-9172 Stock 35-0296 27897-78 .72
35-9176 Viton 35-0295 27382-77 .75
35-9279 Replica 35-0299 27348-77 .88
Plastic 90° Keihin Keihin Adjustable 35-0298 27348-76 1.00
Carburetor Fitting Main Jet. Fully Keihin Main Jets.
replaces 27371-76. adjustable for VT No. OEM MM
VT No. 40-0534 maximum tuning 35-0357 27419-76 1.65
efficiency. 35-0358 27418-76 1.70
VT No. 35-0369 35-0359 27417-76 1.75
High Flow Fuel Inlet replaces broken fuel inlet 35-0361 27416-76 1.80
to the carburetor bowl for modified engines. Fits Needle Jet Seat Cutter eliminates gasoline
all Keihin carburetors (Butterfly and CV) 1976-84 seepage from around the needle jet. Creates a
Shovelhead, Evolution and TC-88. smooth and concentric seat. VT No. 16-0095
VT No. 35-0134
Slow Jet Screw Driver facilitates removal of Carburetor Mount Stud Sets.
Keihin slow jets with no damage to jet. VT No. OEM Years Size
VT No. 16-0546 12-2099 33298-65 1965-77 ⁵⁄₁₆ x 1¹⁄₂
12-2126 24824-67 1967-70 ³⁄₈ x 2
Dell’Orto Pumper Air Cleaner Flat Adapter allows 12-2110 29254-78 1978-89 ⁵⁄₁₆ x 1¹⁄₄
use of Bendix air cleaners. VT No. 34-1060
Dell’Orto Spigot Carburetor Adapter

has an O-Ring seal with steel flange.
VT No. 35-9076 35-0030 35-0053
35-0694 35-0695
Dell’Orto Pumper features adjustable accelerator pump and

choke. Kit includes throttle assembly, cable, grips, air cleaner
38mm Flatside Carb Kits include carburetor with built in choke adapter and carburetor adapter to fit side valve three bolt man-
activator, spigot intake manifold, adapter, throttle cable and ifolds. 35-0238
twist grip set. Kit is for o-ring style, like the original or converted VT No. Item Model
heads. Order air cleaner separately. 35-0059 38mm Kit Side Valve
VT No. Fits 35-0053 38mm Kit Panhead
35-0694 Pan 35-0030 38mm Kit Shovelhead
35-0695 Shovel 35-0031 40mm Kit Shovelhead
35-1708 45 models, 34 mm 35-0767 36-2550 Replacement Throttle Cable for 38 and 40mm
35-0767 Indian or UL models 35-0386 Primary Jet #45
28-0981 Rubber Sleeve 35-0945 Emulsion Tube #262
34-1425 Air Cleaner Adapter 35-0238 38mm Carb Only
35-0988 3/8” Fibre Washer SU Carburetor Replacement Parts
VT No. Application
35-4555 8 oz piston return spring (silver)
Air Cleaner Adapter Flange constructed of rub- 35-4556 12 oz piston return spring (green)
ber, clamps on carb spigot. Mounts a CV pattern Spigot Mount OKO Carburetor fea-
air cleaner. Fits 34/38mm “OKO”carbs. tures built in choke activator.
VT No. 34-1425 VT No. 35-0848
34-1425 711
Super ‘E’ & ‘G’ 35-4571 Fits S&S Super ‘B’
35-0362
Accelo Bowls for S&S carburetors. Accelo bowl accelerator

pump/float bowl kits improve the performance of S&S Super
35-9355 B and D carburetors. Eliminates low end throttle hesitation &
35-0008 improves starting. Note: Some machining to carburetor body is
required, complete instructions included.
35-0995 VT No. Use
35-4571 Use on S&S Super ‘B’ & ‘D’ carburetors with two
S&S 1⁷⁄₈ & 2¹⁄₁₆ Super ‘G’ feature adjustable volume pump, cable throttle control. 1982-up
enrichment device for ease of starting and a throttle spool 35-0203 Pump for Above
assembly designed for late 2 cable operation. Supplied with 35-0934 Single Arm Single
tear drop air cleaner, mounting bracket and black fuel line.
35-0362 Dual Arm
Super ‘E’ carburetor is approximately 1⁷⁄₁₆” shorter than the Dual
Super ‘B’ carburetor, making installation length of the Super 35-0864 Bowl Only
‘E’ the same as stock. Can be used with 3.5 or 5.0 gallon 15-0298 Bowl Gasket
Fatbob tanks. The 1¹⁄₈” is for street stock applications, 21/16” Replacement Float fits all S&S Super B-E-G carbu-
for big bore and race use. Intake manifold clamps or flanges retors. For use with wire type needle and seat.
must be purchased separately when they are required. VT No. Brand
1⁷⁄₈ ‘E’ 2¹⁄₁₆ ‘G’ Fits 35-9189 VT
35-0001** — Panheads, Knuckleheads w/O-Ring Manifold 35-9183 S&S
35-0002 — Pre-78 Big Twin with O-Ring heads
35-0003 35-9201 1978-84 Big Twin with Rubber band heads
35-0013* — As Above with Notched Air Cleaner for
Five Gallon Tanks
35-0471 — Carb Only Natural Finish
35-1050 — Carb Only Black Finish
35-9355 — Rebuild Kit 35-9142 35-0290
35-0995 — Jet Kit
Master Rebuild Kits. Complete carburetor restoration for
2596-13 — Screw Kit
S&S Super B carburetors can be performed by using master
35-0235 — 1⁷⁄₈” Insulator
rebuild kit. Float not included. Year refers to when carb was
35-0102 — 1⁷⁄₈” Intake Manifold
manufactured. 1983 and earlier has forked type floats.
*Note: Does not include intake manifold & can be use on 1966-82.
VT No. Year
**Note: Plumber Style Heads Require 7344-6 manifold nipples to
35-9142 1983 and earlier S&S
be installed in heads for fitment. Throttle Shaft Kit
35-0204 1983-up V-Twin
Quick Change Float Bowl 35-0290* All Years V-Twin includes shaft, spring
Screws for S&S Super models to *Note: Includes late needle and float. and stop for S&S “B”
facilitate jet changes by easy bowl series carburetors.
removal. Includes four knurled VT No. 35-0981
screws with large slots in satin Carburetor Enricher for S&S "B" carburetors.
finish. VT No. 35-0371
VT No. 37-8901 "E" Series Throttle Cable
Carburetor Adapter Block
Super E Carburetor Body Rebuild Kit. Upgrade Kit. VT No.
VT No. 35-0850 VT No. 35-9191 36-0546
Sifton Hop-up kit for S&S "E" Carburetor
includes emulsion tube and bomb sight annular
booster tube.
35-0548 Retrofit Fuel Line Kit includes a pre- VT No. 35-0133
formed 17" x 5/16" black fuel line, needle Carburetor Spacers for S&S are available in 1”
and seat inlet assembly with 90° swivel fit- or ³⁄₈” thickness for spacing out 1⁷⁄₈” carburetors on
ting, hose clamps and a float bowl gasket. models with five gallon tanks.
Fits Custom application for S&S Super E VT No. Size
and G carburetors. VT No. 35-0548 35-0105 1”
35-0086 ³⁄₈”
14-0957 Super ‘E’ Carburetor Base, O-Ring
Support Brackets
Air Cleaner Support Brackets to fit S&S Super 31-9918 34-0336 Air Cleaner Support Brackets fit
‘E’ and ‘G’ on 1966-82 FL-FX. VT No. 34-0336 17/8” S&S Super ‘B’ carburetors.
VT No. Fits
31-9918 All Adjustable type
Air Cleaner Support Bracket fits
S&S Super ‘E’ & ‘G’ 1966-82 FL-FX.
VT No. 34-0336
712
35-0980 35-0977
CV Carburetor
35-0987 35-0990
35-0788 35-0762
Carb not
included
35-0981 CV Carb Complete Assembly, 40mm
VT No. Type
35-0987 Alloy
35-1673 35-0721 35-1067 35-0990 Black
35-0965
CLASSIC
35-0287 35-0656 35-0658
35-0659
35-0660 35-0663 35-0752
“L” Series
“L” Series Parts. 40 mm CV Carb Kit fits 1970-84 Big Twin. Includes a replica 40mm CV
VT No. Item
35-0287 Jet Kit
35-0998 Throttle Arm & Door carburetor, manifold adapter, intake clamps, a late flat intake manifold
35-1673 Choke Door Kit
35-0656 Throttle Shaft
35-0965 Air Bleed Jet Kit
seal and adapter ring kit.
35-0658 Spring VT No. 35-1751
35-1280 Complete Carb "L"
35-0659 Kit
35-0939 Shaft CV Carb Conversion Kit fits
35-0660 Screw
35-0721 Idle Mixture Screw
35-0663 Main Nozzle Dis. Tube
35-0722 Carburetor Shaft Linkert 4 bolt 1948-65 manifold.
35-0752 Arm
35-0762 Dual Bowl Mount
35-0729 Throttle Door Kit includes CV 40mm carbure-
35-9238 Throttle Shaft
35-0664 Throttle Arm
35-1702 Choke Shaft Lever Assy
tor, 4 bolt Linkert adapter and a
35-0788 Bowl Dual Kit rubber seal sleeve. Carburetor
35-0967 Overhaul & Screw Kit
35-0977 Body
35-9339 Carb Rebuild Kit is operated by a push-pull dual
35-0980 Bowl
35-1067 Air bleed screw
35-0981 Carb Throttle Ret Spring Kit cable assembly, not included.
VT No. 35-0667
35-9118
Mikuni Carburetor
Mikuni HSR 42 Carburetor Kit for
1970-84 Big Twin models. *Note:
Includes carburetor, manifold and air
cleaner assembly. VT No. 35-9118
35-9136 35-0117 35-0194 35-4574
Mikuni Carburetor Kits 38mm for all
35-9162
FL-FX. Includes air cleaner, carburetor,
manifold adapter, hose clamps, main and
pilot jet assortment and throttle cable. Fits
1966-up Shovelheads, 1957-up Sportster,
35-9340 35-9341 35-0098
Note: 1948-65 must use VT No. 35-0103
Manifold not included in kit. Carburetor Adapters.
VT No. Item Cables VT No. Carb Size Type
35-0010 Complete Kit 36-0249 SS Cable 35-9136 36-45 mm Spigot Rubber
34-0567 Air Cleaner 36-0105 Cable 35-0117 42-42 mm Spigot Rubber
35-0071 Throttle Handle Assembly 36-2550 Cable 35-0194 40-44 mm Spigot Rubber
35-8016 35-4574 36-38 mm Flange Adapter
35-9136 Spigot Manifold for 1966-84
35-9162 40 mm Flange Adapter
Shovelhead, and 1957-84 XL 35-0088
35-9340 42 mm Flange Adapter
for accepting 38-40mm Mikuni 35-9341 46 mm Flange Adapter
or Lectron carburetors. Order 35-0098 38 mm 2 Bolt Adapter with rubber
rubber adapter separately. 35-0088 38 mm 2 Bolt Adapter
VT No. Item
35-8016 Manifold
35-9136 Rubber Adapter
713
Linkert Intake Manifold
35-0043 35-0373 Complete Manifold Kit
fits 1955- 65 BT.
VT No. 35-0373
7614-4 7314-9 35-0124 7627-4 7344-6
7104-2
“Rubber Band” Type Intake Manifold Conversion Kit for
1940-54 Big Twin Overhead Manifold Kit is constructed of 1940-54 Knucklehead and Panhead eliminates troublesome
cast iron and includes brass seals, nuts, screws and gaskets to intake manifold leaks common to Knucklehead and Panheads
fit Knuckle and Panhead models. with worn and distorted “plumber” style manifold components.
VT No. Item VT No. Item
35-0043 Replica Kit, Complete 7314-9 Complete Kit contains cast manifold,
7103-2 two conversion nipples, two nipples to cylinder head
7104-2 Seal Set seals, two nipple to manifold seals, two rivets and
35-0826 Parkerized Nut and Seal Kit four carburetor mounting screws
2905-2 Brass OS Seal Set 7315-3 Manifold only (Colony Alloy)
7103-2 Chrome Nut Set 35-0124 Manifold only (Replica Steel)
7614-4 Cadmium Nuts, with Seals 35-0692 7344-6 Steel Conversion Nipple Kit, 1940-54 OHV 74
7627-4 Aluminum Weld-in Nipple Kit only
9718-4 Parkerized Nut Set 60-0142 Welding Service for VT No. 7627-4
9718-4T Parkerized Nut Set 35-0103
35-0941 35-8017
10-0471 Inserts
15-0262 Insulator Only 9718-4
15-1386 As Above, James
15-0538 Insulator Kit 35-0106 40mm
15-0535 Carburetor to Manifold Gasket, 5 pack Intake Manifold Nipples have threaded inserts, sold each.
15-0453 Carburetor to Manifold Heatproof Screws into head.
Panhead Manifolds.
15-0547 Carburetor to Manifold Heatproof, 5 pack VT No. Fits
VT No. Type
7119-2 1940-54 OHV 74”
35-0106 S&S
35-0346 61” 10-0471 1940-47 OHV 74”, pair
35-0941 1⁷⁄₈”
10-0472 1948-54 OHV 74”, pair
35-8017 Spigot
2230-6 1948-54 OHV Nipple Bolts
35-0103 Bendix-Keihin
2636-10 1937-47 Nipple Pin
11-1211 1948-54 Nipple Pin 2763-5
35-0064 74” 35-0048 2995-1 O.S. Nipple
1936-39 61” 3 Bolt 9513-1 1936-39 OHV 61”
35-0735 2763-5 Tool
35-0064 Manifold Only, Cad. Plated 1939
35-0547 Manifold Only, Nickel Plated, 1936-38 2763-5T Sifton Manifold Nipple & Rivet Tool 2763-5T
35-0048 Manifold Kit, Nickel Plated, 1936-38 35-0216 35-0117 35-0343
35-0346* 74” Manifold Kit
35-0863* Brass Seals/Parkerized Nut Kit
35-0692* Parkerized Nut Set
35-0735* Brass Seal Set
15-0539 Insulator Kit 3 or 4 Bolt Linkert Intake Manifold
35-0885 Spacer 15-0539 Adapters. Allows use of Spigot type car-
*Note: Allows 1936-39 61” manifold to be installed on 1940- 35-0344
buretors to be installed on 3 or 4 bolt early
54 74” cylinder heads. Manifold has small 61” bore size. Kit style intake manifolds. Can used with a
includes special nuts and seals for installation. Nuts and seals 2-bolt Bendix adapter.
for 1936- 61”. VT No. Size Type
Nuts Finish Seals Only 35-0216 34mm 3 Bolt Adapter Kit
8012-2 Chrome 8006-2 35-0117 42mm Spigot Rubber
9702-2 Parkerized 8006-2 35-0343 38mm 3 Bolt Spigot 35-0887
8007-2 Cadmium 8006-2 35-0723 38mm 3 Bolt Spigot
8012-2 9702-2T* Parkerized 8006-2T 35-0344 38mm 4 Bolt Spigot
*Note: Includes seals. 35-0271 38mm 3 Bolt Kit
28-0981 38mm Rubber
35-0887 40mm 4 Bolt Linkert
Manifold Wrenches large type, heavy duty
8930-8 8929-8 9672-8 for shop use.
Linkert Carburetor Mount Screws. Carb to manifold, 4 pack. VT No. OEM Size Use
Cadmium Chrome Parkerized OEM Type Fits 16-0110 94537-26 1⁷⁄₈” 45” Manifold
8159-8 8158-8 9672-8 27422-39 Short 1939-49 16-0112 94538-30 2” SV Manifold
8930-8 8929-8 9664-8 47248-48 Long 1948-65 16-0109 94538-48 2¹⁄₈” BT Manifold
— — 2455-3 1123-30 Short 1930-38
Note: Long is for use with insulator block
714
Intake Manifold
15-0141 Manifold Spacer replaces 29250-78
on 1971-88 models. ³⁄₈” thick.
VT No. Item
15-0141 Stock Spacer, each
15-0142 Gaskets, Non-beaded
15-1144 Gaskets, Beaded
1966-84
15-1019 Spacer Kit, James
(1³⁄₄” inner diameter) Stock
15-1162 Spacer Kit, James
(1¹³⁄₁₆” inner diameter) Custom
35-0085 35-0084
Stock Intake Manifolds are of cast alloy as original.
1966-77 Intake Manifold Rings update early style O-Ring VT No. Fits Type
intake manifolds or cylinder heads to late style flat band type 35-0085 1966-77 FX O-Ring
seals. Available for stock or stroker .200 taller cylinders. Set 35-0084 1978-84 FX Flat Seal
includes four standard and two stroker rings. CV Carburetor Adapter adapts HSR-42
VT No. Type Quantity Mikuni or CV carburetor to two bolt mani-
fold. Use spigot seal VT No. 14-0180. Fits
35-0411 Adapter Rings, Stock 10
CLASSIC
two bolt early style. VT No. 35-9150
35-0412 Stroker Rings 10
35-0429 Set
Intake Manifold Clamp

35-0407 Polished Stainless Intake
35-0409 35-0449
Manifold Clamps are strong yet
easy to install. Fit all 74” 1955-
Early 78 and Sportster 1957
Early1978 models with O-rings.
VT No. Item
35-0407 Clamp Kit
14-0519 O-Rings 10 pack
V-Twin’s 360° Power Intake Clamp is full stainless steel 35-0406 35-8026
which features a “floating bridge.” Closes the gap under the “T”
bolt for total 360° wrap around seal. The best available sold as
a set with O-Rings or seals.
VT No. Power Type Item U/M
35-0415 35-0449 1955-77 O-Ring Kit 35-0193 35-0192
35-0409 35-0448 1978-84 Flat Seal Kit
14-0519 1957-77 O-Rings 10 pack
14-0113 1978-85 Flat Seals 10 pack
Intake Clamp Update Kit for
1955-84 models. Kit includes
manifold rings, Silicone seals V-Twin Style Intake Clamps are two piece type polished brass
and stainless clamps. Use to or chrome.
update early intakes to late style VT No. Years Type Finish Note
seals or when intake flanges 35-0406 1955-77 O-Ring Chrome No Seals
are damaged on early heads. 35-8026 1978-84 Flat Seal Chrome No Seals
VT No. 35-0436 35-0193 1957-77 O-Ring Brass Seals
35-0192 1978-84 Flat Seal Brass Seals
1978-84 Intake Clamp Set
includes four pieces of single
use clamp, installed by VT No.
16-0050 tool.
VT No. 35-0419
14-0113 14-0519 14-0924
Intake Manifold O-Rings and Seals.
James VT No. Year Type
— 14-0519 1955-77 FL O-Ring
35-0408 14-0626 14-0113 1978-85 Flat Seal
35-0410 — 14-0924 1978-85 Flat Seal Red Silicone
Stock Style Intake Clamp Sets include O-ring or seals for
proper year and feature fillister or allen screws as original. Replica Intake Clamp Set features fillister
Available in chrome or stainless. head screws.
VT No. Year Finish Screw VT No. Year Finish
35-0408 1955-77 Chrome Allen 35-0417 1955-56 Cadmium
35-0439 35-0439 1957-76 Cadmium
35-9177 1955-77 Stainless Fillister
35-0410 1978-84 Chrome Allen 35-0443 1957-76 Zinc 715
35-0418 1978-84 Stainless Fillister 35-0440 1977-84 Zinc
Internal Throttle Part
49-0150
36-0954
36-0950 36-0952 36-0953

Inner and Outer Throttle Spark Casing Assembly.
Throttle Control Parts listed fit 1936-48, except noted. 49-0801* Set 1932-48 Replica Set Vinyl Casing
VT No. OEM Item 36-0808 Set 1936-48 Replica Set, 54”
49-0150 56271-36 Plunger, Complete Kit, each 36-0907* Set 1936-48 54” includes inner cloth casing
9505-2 3316-36 36-48 Big Twin Plunger only, pair 36-0950 56502-32 1932-48 Outer, Vinyl Casing
49-2005 56245-31 Spiral 36-2579 56502-32 As Above Cotton Braid Cloth Casing
49-0956 56276-31 Screw, 10 pack 36-2578 — 1909-31 Outer Nickel Plated Casing
7626-2 56287-36 Parkerized End Nut, pair 36-0958 3743-09 1909-31 Nut for Above
7626-2T 56287-36 Cadmium End Nut, pair 36-0951 56528-49 1949-53 Outer Vinyl Casing
7625-2 3330-31 Parkerized End Nut, pair 36-0956 — As Above Cotton Braid Cloth Casing
8923-8 9261 Pin 36-0979* Set 1949-53 Set with Vinyl Casing
36-0960* Set 1954-59 Set with Vinyl Casing
56281-31 Kit for
36-0952 56502-54 1954-72 Outer Vinyl
56278-10 Two Sides 36-0953 56373-09 1909-72 Inner Wire Set
12-1156 9281 Throttle Pin, 4 pack 36-0566 56347-49 1949-72 Inner Wire Set
49-0240 56278-10 Collar, Throttle 36-0954 56420-09 1909-48 Wire End
49-2049 56278-10A Collar, Throttle, 1910-72 36-0139 — 1936-71 Wire Pull
36-0950 56502-32 Outer Vinyl Casing *Note: Includes Inner Wire.
36-0953 56379-09 Wire Carburetor Cable Block attaches inner choke or
49-0156 56283-31 Wire Screw, 10 pack throttle cable on Linkert and Bendix carburetors.
49-0950 Throttle Wire End, 1936-48 Includes screw and cotter pin. VT No. 35-0207
36-0954 56420-09 Wire End, 10 pack
36-0481 36-0498 36-0497
Throttle Control Parts range from 1917-72.

36-2551 VT No. OEM Item
49-0650 56220-48 Grip Spiral
49-0651 56235-47 Grip Retainer, 2 pack
49-0652 56240-47 Grip Screws, pair
49-0653 56391-49 Plunger, each
36-0499 36-2574 36-0951 56528-49 Outer Control Vinyl Casing
Throttle Spirals and Cable Kits include all internal parts for 49-0956 56276-31 Cable Plug Screws, 10 pack
years listed. The 1936-48 type features chrome throttle spi- 36-0953 56373-09 Inner Wire Set
rals. Grips are not included. 36-0497 Kit Above Parts, both sides
VT No. Years Sides Throttle Type Cable Casing 36-0073 Inner Wire Set
36-0481 1936-48 2 None Vinyl
36-0483 1936-48 2 None Replica 49-0163
36-0498 1936-48 2 Push Vinyl
36-0497 1949-53 2 Push Vinyl
36-0499 1954-73 2 Push Vinyl
36-2551 1954-73 1 Push Vinyl
36-2574 1954-73 1 Pull Vinyl
49-2005 49-0158 49-0911
Throttle Control Parts range from 1917-72.

VT No. # OEM Item
Handlebar Spirals. 49-0158 A 56220-53 Spiral, Push
VT No. OEM Years Type 49-0911 A 56220-58 Spiral, Reverse, Pull
49-0083 56245-35 1935-48 Push, Raw 49-1571 49-0159 G 56288-53 Parkerized Plug, pair
49-0227 3312-16 1916-34 Push, Chrome
49-2005 56245-35 1935-48 Push, Chrome 9214-2 G 56288-53 Cadmium Plug, pair
49-0857 Set 1935-48 Push, Chrome 8924-8 C and D 56278-10 Roller and Pin
49-2065 — 1935-48 Push, Oversize 9261 Kit
49-1571 1/2 Turn 1935-48 Push 49-0161 E 2594 Screw
49-0087 — 1936-48 Pull 49-1578 49-0162 F 3207 Screw
49-0650 56220-48 1949-53 Push
49-0662 — 1949-53 Push, Oversize 49-0163 B 56400-53A Plunger
49-0158 56220-53 1954-70 Push 9514-2 B 56400-53 Plunger
49-0911* 56220-58 1971-74 Throttle Pull 36-0952 H 56528-49 Outer Casing Vinyl Casing
49-1324 Flanders Push 36-0953 I 56373-09 Wire
49-1371 Flanders Pull 13-0215 J 56216-53 Spring
49-1578 1/2 Turn Pull 28-0625 K 56239-53 Grip End Plug, Zinc, pair
*Note: Reverses direction on 1954-70 throttle
49-0956 L 56276-31 Screw, Handlebar Plug
716 36-0499 Kit includes All Parts Above for Both Sides
Throttle/Idle Cables
Throttle Cable
36-0101
Big Twin Throttle/Idle Cable Assemblies Throttle/Idle Cable Assemblies are available in black Black
vinyl or braided stainless covering with correct end fitting for each application, also available in overstock
length. Assemblies unless noted.
V-Twin V-Twin Barnett Barnett OEM Length/Fits
Stainless Black Stainless Black Braided Cable Heat Shrink
— — — 36-2460 56389-74 Stock 1974-75 All Tubing. Clear heat shrink tubing
— — — 36-0107 — +6” Extension As Above is for use on all braided stainless
— — 36-1501 36-2461 — +8” Extension As Above
36-0901 36-0102 36-1502 36-2462 56313-76 Stock 1976-80 All steel cables to prevent cable from
— 36-0103 — — — +6” Extension As Above scratching painted or chromed sur-
— 36-0357 36-1503 36-2463 — +8” Extension As Above faces while still keeping that braided
— — — 36-0948 — +12” Extension As Above steel look. Kit contains four 16”
36-0903 36-0101 36-1504 36-2464 56324-81 Stock 1981-89 FX-FLH-FXST-FLST Throttle Cable long heat shrink tubes to cover two
— — 36-1505 36-2465 — +8” Extension As Above
— 36-2558 — — — +12” Extension As Above throttle cables, one clutch and one
CLASSIC
36-0902 36-0100 36-1506 36-2466 56323-81 As Above, Stock Idle Cable speedometer cable. Bulk tubing is in
— — 36-1507 36-2467 — +8” Extension As Above a 10 foot roll.
— 36-2557 — — — +12” Extension As Above VT No. Item
— — — 36-2468 56328-81 Stock 1981-89 FLT-FLHT Throttle Cable 40-0015 Cable Sleeve Kit
— — — 36-2469 56327-81 As Above, Stock Idle Cable
40-0019 ³⁄₈” x 10’ Roll
40-0021 ³⁄₄” x 10’ Roll
Barnett Carburetor Conversion
Throttle/Idle Cables. Order by carbure- Clear Coated and Stainless
tor and throttle type. For use with stock Black Matched Stock and Idle Cable
type Push-Pull Throttle handles except Assemblies with 45 degree elbow fittings
as noted. for Big Twins.
36-0860 Stock +8” Years Model
36-0860 36-0863 1981-89 Softail,FLH
Mikuni Carburetors, 38 and 40mm
Stainless Stainless Black Length Cable Stainless Steel Braided Cable Set .
Clear Coat features clear coating for throttle and idle
— 36-1542 36-2493 38” Throttle Unv., Single 36-0855
applications and 45 degree elbow fittings.
— 36-1543 36-2494 46” Throttle Unv., Single
VT No. Year Model Length
— 36-1544 36-2476 38” Throttle 1976-80 Single
36-0855 1981-89 FX-FLST Stock
— 36-1545 36-2541 43” Throttle 1981-95 Single
Mikuni HS40 36-0868 1981-89 FX-FLST +8”
— 36-1546 36-2543 41” Throttle 1981-95 36-0114 1982-95 S&S 42”
— 36-1547 36-2542 41” Idle 1981-95 36-0115 1982-95 S&S 54”
Mikuni HS 42/45
— 36-1550 36-2585 36” Throttle 1981-95
36-0667 36-1551 36-2586 37” Idle 1981-95 Spiral Chrome Throttle Cable in stock
Keihin length. Fits 1976-80 throttles.
— 36-1554 36-2477 38” Throttle Unv., Single VT No. 36-0511
— 36-1555 — 46” Throttle Unv., Single
S&S Super ‘B’ or Bendix
— 36-1556 36-2474 37” Throttle 1976-80
S&S Super ‘E’ & ‘G’ and Screamin’ Eagle
— 36-1563 36-2545 38” Throttle 1981-95
Clear Coated
— 36-1564 36-2544 38” Idle 1981-95
Dell’Orto Pumper
36-0670 — 36-2550* 40” Throttle Unv, Single
Dell’Orto Dual Throat
— — 36-2581 39” Throttle 1981-95
— — 36-2582 39” Idle 1981-95 Barnett Clear Coat Braided Stainless Throttle Cable Sets
Universal Throttle Cables by V-Twin include throttle and idle cable.
36-0905 — — 30” Ball and Barrel Ends VT No. Year Model Length
— — 36-0104 43” Barrel End 36-0832 1981-95 S&S Super E,G, Screamin’ Eagle 33”
— — 36-0112 60” Barrel End 36-083 0 1981-95 S&S Super E,G, Screamin’ Eagle 38”
— — 36-0105** 38” 38mm Mikuni Ball End 36-0832 1981-89 FX, FLH, FXST, FLST Stock
*Note:Two elbows 36-0833 As Above + 8”
**Note: 90 degree elbow fitting 60” Chrome Cable Wrap is a classic 1950’s
Chrome Throttle Cable Support style dresser trim item. Inner diameter size
Bracket. for all Twins with Bendix carbure- 36-0521 noted. Sold each.
tor. Replaces 27459-74. VT No. Size
VT No. 35-0208 36-0520 5mm
36-0521 6-7mm
36-0525 8-11mm
717
Clutch Cable 36-0411
36-2521 36-0500
Clutch Cable
Big Twin Clutch Cable Assemblies feature heavy duty construction designed for reliability and longer service. Assemblies
are available by V-Twin or Barnett in black vinyl or braided stainless covering.
V-Twin V-Twin Barnett Barnett OEM Fits Casing
Stainless Black Stainless Black Length
with
Clear Coat
36-0500 36-0400 36-1526 36-2355 38618-52 Stock, 1952-67 Big Twin with mousetrap 31”
— 36-0401 — — — +4” Extension, As Above 35”
— — 36-1527 36-2356 — +8” Extension, 1952-67 Big Twin 39”
36-0502 36-0402 — — 38618-68 Stock 1968-83 Big Twin, 1984-85 FXST, 1986 FXWG 52³₈”
— 36-0072 — — — As Above with eyelet type end 52¹₂”
36-8049 — — — — As Above, Clear Coated 52¹₂”
— 36-0403 — — — +4” Extension, As Above 57¹₄”
36-2521 — — — — +8” Extension, As Above 61”
— 36-2536 — — — +12” Extension, As Above 65”
— 36-0411 36-1528 36-2496 38618-68 Stock 1968-83 Big Twin, 1984-85 FXST, 1986 FXWG 51.625”
— — — — — Nylon Lined Small Diameter Casing
— — 36-1529 36-2497 — As Above 59.75”
— 36-0398 — — 38618-68 Stock 1968-83 Big Twin, 1984-85 FXST, 1986 FXWG 52.25”
— 36-0399 — — — +6” Over Stock, 1970-84 FL, 1971-78 FX, Heavy Duty 57”
— — 36-0692 36-2359 38599-80A Stock 1980-82 FLT-FXR-FXRS ¹⁄₈’’ Cable 57.75”
36-8058 — — — 38599-80B Stock 1980-82 FLT-FXR-FXRS 55.44”
Handle Assembly
Clutch and Brake Lever
26-0954 Assemblies include cable pin.
26-2127 Available chrome or polished with
Note: VT No. 26-2167 and ³⁄₈” or ⁵⁄₁₆” hole sizes for cable
26-0951 26-2168 accept front brake entry.
26-0950 switch.
Chrome Polished OEM Hole Year Type
26-0953 26-0523 26-0524 38608-68 ³⁄₈” 1968-72 Clutch
26-0957 26-0525 26-0526 45002-65 ⁵⁄₁₆” 1941-68 Brake
1952-67 Clutch
Complete Replica Lever Assemblies include slotted lever 26-2167 26-2168 45002-69 ⁵⁄₁₆” 1969-72 Brake
bushing as original with small hole for brake or clutch. Front Brake Cable. Replacement core and casing for
Complete VT No. OEM Finish 1949-71 FLH Glide 1952-72 Sportster models. Replaces
26-0954 26-2127 45002-41 Chrome Complete, Brake 45073-51 60” long, must be cut to proper length.
26-0953 26-2126 45002-41 Polish Complete VT No. Type
26-0950 Polish, Brake 36-2385 Stock V-Twin
26-0951 Chrome, Brake 36-2565 Stock M&M
26-0957 Polish, Brake 36-0545 Replica 1949-52, 26”
36-0501 Stock Type, Barnett
26-0779 36-2489 Braided Steel
26-0522
Brake Cable Clamp is a universal style clamp.
26-0152
VT No. 26-0508
Ball End Stainless Style Assemblies Cable Clamps are to hand lever for emergency or per-
26-0522 Ball End ⁵⁄₁₆” Complete manent use. Easy to install .460” diameter. (Pair)
26-0152 Screw Polish VT No. 26-0509
26-0779 ³⁄₈” Hole Polish 26-2138
Lever Components
26-2192 — Chrome Stock Lever Only
26-0542 — Lever Clamp Strap 26-2130
26-0505 26-0506
8819-4 45031-41 1941-64 Pin and Nut, Cadmium
26-0506 45033-49 1949-64 Lever Bushing with cotter Lever Pins/Bushings
Hand Lever Pivot Pins for brake and clutch sides. VT No. OEM Item U/M
VT No. OEM Item 26-0505 45036-68 1965-72 with bushings 10
8819-4 45031-41 1941-64 Pin and Nut, Cadmium 26-2129 26-2138 45039-68 Nylon bushing 25
26-0507 45031-65 1965-81 Pin and Clip, 10 pack 26-0506 45033-49 1949-64, with cotter 5
26-0544 — 1965-81 Pivot Pin Set with 26-2130 45036-82 1982-87 10
grease fitting
12-0939 11036 Retaining Ring for Above, 10 pack 26-2257 Brake Handle Assembly
26-2129 45032-82 Pin, each
12-0944 11143 Retaining Ring for Above, 10 pack
718
35-9246
Throttle Cable Kit
35-0215
35-0070 35-0211
Throttle and Cable Kits include grips, throttle idle and Barnett
throttle cable with ends attached as pictured for S&S ‘E’ and ‘G’
carburetors.
VT No. Item
Throttle Kits available in single or dual units with or without
35-9246 38” Complete Kit
grips and chrome end plugs.
35-0212 Handle and Grips only
VT No. OEM Type
S&S Super ‘E’ & ‘G’ and Cables for Dual Stock Type Throttle
Single 1974-80
Handles.
35-0215** 36500-74 Kit with two grips
Black Length Type Years
35-0700 Single Throttle Cable Assembly
36-2464 33” Throttle 1981-95
35-0070** As Above As above with bracket
36-2466 33” Idle 1981-95
35-0211* 56500-74 Throttle only
CLASSIC
36-2545 38” Throttle 1981-95
35-0210 56397-74 Adjuster only
36-2544 38” Idle 1981-95
*Note: Includes nylon tube with chrome clamps
**Note: Includes chrome end plug.
35-0253 35-0212 35-9352

35-0254
Chrome Throttle Clamp and Tube Sets feature smooth
design, upper and lower pieces with screws and nylon throttle
tube, for single or dual cable applications. Sets are for use with
1982-up type cables.
VT No. Type
35-0253 Single
35-0254 Dual 35-9149
35-0071 35-0213 B 35-0214
A
C
35-9350
Dual 1981-up (Push-Pull).
VT No. OEM Item 35-9218
35-0232 35-0237 56395-81 Kit with grips
Universal Throttle Sets feature chrome or black housing with 35-0212** 56395-81 Kit with grips
adjuster and metal twist tube. All use universal single cable. 35-9352** 1981-89 Kit with black cables
VT No. # Item 35-9350 1991-95 Kit with black cables
35-0232 Single Handlebar Throttle Assy without grip 35-9149* 56324-81A Throttle Handle Only
35-0213 B 1” Throttle Assy with plastic grips and cable 35-9218 56396-74 Friction Spring for above
28-0215 Barnett Left Side Universal Grip
*Note: Includes nylon tube with chrome clamps.
36-0104 Cable Only, Barrel End Only, 43”
**Note: Includes chrome end plugs.
36-0112 Cable Only, Barrel End, 60”
36-2538 Cable Handle Ferrule with nut
35-0071 A 1” with Anderson Rubber grips, Chrome
35-0266 1” with Anderson Rubber grips, Black
28-0116 Grips for above 36-0151 35-0856 35-0857 35-0858
35-0779
35-0347 1” Anderson Handlebar Kit
35-0779 ¹⁄₄ Turn Throttle for 1” Bars
35-0832 ¹⁄₄ Turn Throttle for 7/8” Bars
35-0214 C ⁷⁄₈” with Plastic grips and cable
35-9870 35-0865 35-0255 36-0564
Throttle Housing custom design for single cable operation.
Single Dual Finish
35-9073 28-1981 36-0151 Chrome
35-0856 Black Vintage
Nylon Throttle Tubes. 35-0857 Chrome Vintage
VT No. Type Year 35-0858 Copper Vintage
28-0786
35-9073 Single 1976-81 35-0865 Cable Black
28-1981 Dual 1982-95 35-0255 Accepts a 1982-1995 throttle cable
35-9870 Dual 1996-up 36-0564 Chrome Dual Cable Throttle housing is 1”
28-0786 Dual 1982-95, includes grips with 1/4-20" thread, and is for use with idle and throttle cable.
719
Choke Cable
36-0989 36-0994
36-0993
36-2387
FLH-FXST-FLT Choke Cable. Complete assemblies include

knob, casing and inner wire. 36-2386
VT No. OEM Item Fits FX-FXR Choke Cable Assemblies are for years listed.
36-0989 Assembly 1967-70 FLH VT No. # OEM Fits
36-0993 29212-71 Assembly 1971-78 FLH 36-2389 D Kit 1973-78 FX-FXS
36-0523 29213-79 Casing & Wire 1979-84 FLH, 36-0987 C 29220-67 1967-70 FL
29211-86 1984-89 FXST 36-2386 C 29221-73 1973-78 FX-FXS
1985-86 FXWG 36-2387 B 29216-73 1973-84 FX-FXS
36-0517 Inner wire 1971-78 FLH 29219-78 1979-E80
36-0995 29214-71 Chrome Knob 1971-89 FLH-FXST 36-0994 A 29214-67 1971-84 FX Knob (Black plastic)
28-2117 27451-82 Rubber Grommet 1982-89 FLH-FXST 49-0294 GAS TANK BIB, RAW STEEL
12-0576 27450-82 Nut 1982-89 FLH-FXST 49-0437
49-0470
REAR SPRING FORK SLIDER, CHROME
FRONT SPRING FORK SLIDER, BLACK
49-0508 SPLITDORF SPARK PLUG SET
49-0509 SPLITDORF SPARK PLUG SET
49-0529 FRONT SPRING FORK SLIDER, BLACK
49-0537 FRONT BRAKE BACKING PLATE KIT, BLACK
36-0545
36-0688 49-0609 FRONT BRAKE BACKING PLATE, BLACK
49-0613 REAR BRAKE BACKING PLATE ASSEMBLY KIT
49-0614 FRONT BRAKE BACKING PLATE, CHROME
Replica Cables for stock length application. Include braided 49-0634 REPLICA M41 LINKERT CARBURETOR
steel inner with spiral wound outer covers with black braided 49-0725 OFFSET SPRING FORK HANDLEBAR ASSEMBLY
49-0728 KNUCKLEHEAD HAND SHIFTER KIT
cotton as originally crafted restoration quality! 49-0740 SADDLEBAG SUPPORT SET
VT No. Fits Type 49-0822 CLUTCH HUB SPACER
49-0823 SPARK PLUG HOLDER AND PLUG SET
36-0688 1952-64 Mousetrap
36-0545 1950-52 Brake 49-0891 CLUTCH BEARING SPACER
49-0992 REPLICA 18MM SPARK PLUG SET
Choke Cable Nut Kit includes nut 7638, and seal 49-0995 CHROME SADDLE BAG HANGER SET
49-1000 CARBURETOR INTAKE MANIFOLD KIT
27451-82 for dash mounted choke on FL-FXWG- 49-1103 1936 ROCKER CLUTCH PEDAL, PARKERIZED
FXST models.VT No. 37-8942 49-1382 GENERATOR MOUNT STRAP, BLACK
49-1650 SPRING FORK REAR LEG
Throttle Cable Bracket

9005-4 Control Cable Guide Hook replaces stock
31-0537 31-0973
45092-66 Stock on all 1966-84 FL, 5 pack
VT No. 31-0193
Chrome Choke Cable Bracket is for use

on 1966-70 Shovelheads.
VT No. 31-4188
Chrome Throttle Cable Bracket fits

31-0787 2041-7 37-9028 all Twins with Bendix type carburetors.
Bracket replaces 27459-74.
Throttle Cable Brackets have parkerized finish and mounting VT No. 35-0208
hardware as original.
Overhead Valve (OHV)
VT No. OEM Year
9005-4 3371-36 1936-48
31-0537 56605-49 1949-53
31-0973 Parkerized 1949-53
31-0787 1948
2041-7 45218-52 1971-72
37-9028 56609-52 1957-65
720
36-0621 36-2524 36-2576
Speedometer Cable
Black Stainless
Transmission Drive Speedometer Cables 36-0601
Black Vinyl Stainless Metal OEM Length Top 36-0120
Nut
1980-83 FXWG, 1971-72 FX, 1962-80 FL-FLH-FLHS.
Note: 36-2524 is chrome. Front Wheel Drive Speedometer Cables.
36-0621 36-2524 67026-62 35” ⁵⁄₈” Choose by application or by length and top nut size. Available
36-2604 Cadmium 39” ⁵⁄₈” in black vinyl, stainless or clear coated stainless.
36-2429 As Above 39” ⁵⁄₈” Black Stainless OEM Length Top Nut
36-2576 67026-62 35” ⁵⁄₈” Vinyl
Zinc, Thin 1987-94 FXR-FLXR, 1984-86 FXRS, 1984-86 FXSB, 1973-82
36-0125 Clear Coat 35” ⁵⁄₈” FX-FXE, 1981-82 FXB, 1983-85 FXR. Replaces OEM 67078-
36-2554 Thick Type 35” ⁵⁄₈” 85A, 67051-73 and 67052-78A.
Zinc .420 36-0606 36-2528 See Text 40” 16mm
O.D. 36-0813 Barnett 40” 16mm
Mini Speedo Kit 1936-85 Big Twin for 39-0316, 39-0314 36-0120 Coated 40” 16mm
CLASSIC
and 39-0365. 1980-85 FXRT, 1983-85 FXE.
36-0512 Custom 50” 12mm 36-2414 36-2529 67048-83A 43” 16mm
36-0121 Coated 43” 16mm
36-0417 FXST Rear Wheel 67401-97 75” 12mm 36-0815 Barnett 42” 16mm
36-0608 67052-78B 49” 16mm
1973-78 FX.
36-0601 67051-73 42” 16mm
36-0602 +4” 44” 16mm
1981-84 FLH. Replaces OEM 67026-81 and 67072-87B.
36-2540 36-0627 See Text 35” 12mm
36-0817 Barnett 35” 12mm
1980-86 FLHT-C/P, 1980-86 FLT, 1989-93 FLHS, 1982-83
Replica Early Cables feature original style housing, .375” thick, FXR-FXRS.
for early FL transmission drive, 45” rear wheel drive. All cable 36-2412 67072-79A 40” 12mm
have female fitting at drive end and nut on speedometer end as 67072-87B
noted. 36-0127 Coated 40” 12mm
Black Zinc Chrome Item Fits Nut
— 36-2540 — 67026-36A 1936-61 BT Male 36-0620 36-2570
36-0451 — — CAD 1936-61 BT Male Male
36-0531 36-2554 36-2524 67026-62 1936-80 BT Female
36-2604 — — CAD 1936-80 BT Female Female
— 36-2571 — 67025-37 1937-52 45” Male
— 36-2572 — Custom 1937-52 45” Female
— 36-2598 — 67028-62 1962-73 Servi Female 36-2577
F G
A D E
Transmission Drive Speedometer Cables. All have female
Speedometer Cable Clamps note cable size of fitment. nuts at transmission end and top nut as noted.
Big Twin Overhead Valve Black Vinyl Metal OEM Length Top Nut
Colony VT No. # OEM Fits/Type 1936-61 FL-FLH Models.
9646-1 — A 67075-36 1936-56, Thick 36-0620 67026-36A 35” ⁵⁄₈” M
— 37-9025 67075-36 1936-56, Zinc
1952-56 K Trans Drive Models.
— 37-0589* A 67074-57 1957-61 Zinc
36-2570 36-2577 67051-52 46” ⁵⁄₈” F
9652-1 39-0337 G 67074-57A 1957-61, Zinc
Black Zinc
9650-1 — E 67075-52 1952-56
9651-1 — F 67074-57 1961-90 Cable Adapter allows use of ⁵⁄₈” cable on 12mm
9649-5 37-9234 D 67086-39 1937-48 Big Twin threaded speedometers.
*Note: Sold in 5 pack VT No. 36-0507
Male to Female Speedo Adapter

Bushing fits late speedometers to accept
early cable. VT No. 36-0897
Replacement Speedometer Cable Nuts for front wheel drive

cables and are available in 5 packs.
VT No. # Type Model
36-0397 A 12mm 1981-94 FXR
36-0396 B 16mm Fine 1973-77 FXE
36-0515 C 16mm Course ⁵⁄₈” NPT Fat Bob
721
Speedometer Drive Kit 36-0800
36-0811 36-0824
36-0810 36-2526 36-0801 36-0804 36-0805
37-2101
17-0094 36-0094
Speedometer Drive Units fit front wheel only and have .750
Speedometer Drive Units include housing and gear as OEM
axle hole, for right and left side as noted, spacer length note. (A)
replacement, for transmission drive. 45” types are for the rear
Overall length (B) Spacer length.
wheel.
(B) (A)
VT No. OEM Teeth Fits
Spacer Overall
36-0810 67130-36 11 1936-61 Big Twin
VT No. OEM Length Length Ratio Fits
36-0811 67130-61 13 1962-67 Big Twin
36-0800 67127-73 .268 .789 2.1 1973-84 All FX’s
36-0824 67130-69 23 1968-80 Big Twin
36-2526 Chrome .268 .789 2:1 As Above
17-0094 7 1968-80
36-0804 67073-81 Flat .532 2240:60 1981-84 FLH
36-0094 7 1968-80
1984-86 FLT
37-2101 Screw Kit 1936-80 Big Twin
36-0805 67071-79 .586 1.114 2240:60 1980-83 FLT
21” Wheel Speedometer Drive Kit
includes drive and adapter ring to Speedometer Drive Spacers replace drive units.
utilize a 2240:60 speedometer on Fits 1973-83 FX.
1973-80 FXWG dual disc and FLH, VT No. 44-0390
single disc. VT No. 36-0565
Chrome Speedometer Drive Covers fit over the
Replica Cadmium existing drive units. Fits 1973-83 FX-FXR (35mm)
Speedometer Cables. and 1981-84 FL, 1982-86 FL (41mm).
36-0451 VT No. Year Fitting VT No. 42-0435
36-0451 1936-61 Male Block Off Plate for Speedometer Drive
36-2604 1962-80 Female Hole Plug includes plate, gasket, screw
36-0938 1936-80 Inner and lockwasher. Zinc plated. Fits 1936-84
Speedometer Cable and Big Twin.
31-0149 28-1998 Cable Mount for front wheel VT No. Item
Installed
drive models 1973-up are 17-0119 Kit
available in a 5 pack. 15-1047 Gasket
VT No. OEM Item
31-0149 38623-68 Chrome 36-0547
Bracket
28-1998 66996-85 Cable Boot
Braided Cable Heat Shrink Tubing.
Clear heat shrink tubing is for use on
all braided stainless steel cables to pre-
vent cable from scratching painted or
chromed surfaces while still keeping that 36-0544
braided steel look. Kit contains four 16”
long heat shrink tubes to cover two throt-
tle cables, one clutch and one speedom-
40-0019
eter cable. Bulk tubing is in a 10 foot roll.
VT No. Item VT No. 36-0544 shown on FLH
40-0015 Cable Sleeve Kit 1973-80 Right Hand Speedometer Drive Adapter Kits.
40-0019 ³⁄₈” x 10’ Roll FLH kit includes 2240:60 ratio right side speedo drive, chrome
40-0021 ³⁄₄” x 10’ Roll hub cover and chrome axle with nuts. For single disc FL spoke
hubs and cast wheels 1981-85 style. VT No. 36-0544
FXST-FXWG kit includes adapter flange, 2240:60 ratio left side
speedo drive and axle to fit 1980-83 FXWG or 1984-99 dual
36-0094 17-9160 17-9161 17-0094 disc spoke hubs. VT No. 36-0547
Drive Seals
36-0094 17-9160 35635-36 Speedometer Gear, 7 Teeth
36-0095 17-9161 35635-62 Speedometer Gear, 4 Teeth
36-0096 17-0094 35635-69 1969-80 Speedo Gear 7 Teeth
722
Snap Cap™ •• Snap On
Tight Fit
37-1503 • Easy Installation
• Universal Use
Chrome Cap Assortment
37-1504
includes 100 pieces each
¹⁄₄”, ⁵⁄₁₆” and ³⁄₈” caps.
VT No. 37-1505
Chrome Caps snap on outside knurled allen screws for ease of 300 Piece Assortment!
installation. Packs of 100. Show Bike Kits are original
VT No. Fits chrome detailing by Colony
37-1502 ¹⁄₄” for models listed. Includes
37-1503 ⁵⁄₁₆” acorn or cap nuts for motor
37-1504 ³⁄₈” and transmission area.
CLASSIC
7909-G
Allen Screw Kit

Cap Acorn Acorn
Chrome Chrome Gold Year Model
— — 7909-G 1936-39 Knucklehead
8505 — 7905-G 1936-39 Knucklehead
— 7915 — 1976-77 Shovelhead
Big Twin Polished Chrome
Engine Sets include all side cov-
ers, lifter base, timing plug, inner
primary mount, top, front, and rear
engine mounts with stabilizing link
fasteners on FX and FL models.
Sets also include rocker box cov-
VT No. Year ers, header mount and points cover
37-7490 1970-76 or generator mount where applica-
ble with washers and nuts where
37-7493
needed on 4 Speed Shovelheads.
Chrome Engine Case Allen Bolts fasten engine case
Panhead Allen Screw Sets. halves together on 1979-82 Big Twins.
VT No. Year Type VT No. 37-9190
37-7492 1965 Engine Set (Short Panhead Screw)
37-7493 1958-64 Engine Set (Short Panhead Screw)
37-8507 1936-64 Cam, Primary Cover Set
37-9181 1948-84 Engine Mount, Lower
Cam and Primary Cover
Chrome Screw Sets for trans-
mission, chain, clutch or derby 8311 CHR
provided where applicable. By
Gardner- Wescott. Fits 1970-84
FLH-FX All 4-Speed models.
VT No. 37-8505
Stock Style Hardware Kit contains all the stock engine nuts,
Chrome Allen Screw Kit con- bolts, washers and studs for your engine in choice of chrome or
nects engine mounts, front, top cadmium plating. Kit includes primary cover screws, lifter base
and rear to frame on models listed screws, circuit breaker screws, case studs and nuts, timing plug,
below. Knurled. Fits 1948-84 Big cam cover screws, cylinder base nuts and washers, oil pump
Twin 4 Speed. nuts and bolts, trans side cover nuts and washers, transmission
VT No. 37-9181 top screws, transmission fill plug, generator screws, head bolts
and washers. For 1948-64 Panhead Kits, order proper length
Panhead cover screws separately.
Chrome Cadmium Year Model
8311 CHR 8311 CAD 1970-75 Shovelhead
8312 CHR — 1976-78 Shovelhead
— 8313 CAD 1979-80 Shovelhead
8314 CHR — 1981-84 Shovelhead
8302 CHR 8302 CAD 1948-57 Panhead
8303 CHR 8303 CAD 1958-65 Panhead
8307 CHR 8307 CAD 1966-69 Shovelhead
723
Bobbbed Gas Tank 1936-84
38-0542 underside
38-0100 38-0101 38-0542 38-0546

RS 38-0112 38-0817 38-0890
Petcock 38-0819
38-0543 38-0543 38-0892 38-0821 38-0894

38-0543
underside
38-0893
38-0165 38-0101
38-0820
Bobbed Gas Tanks fit 1936-84 FLH-FXE with Bobbed tank type 38-0835 38-0836
mounts for years listed not FXR or FLT models. Use 1975-up pet-
cocks with nut. Tanks accept stock dash and speedometer. Order
cap set separately.
VT No. Gal Cap Type Caps
38-0816 3.5 Bayonet 38-0312 38-0837
38-0100 3.5 Bayonet 38-0312 38-0840
38-0101 5.0 Bayonet 38-0312
38-0542 5.0 Bayonet 38-0312
38-0543 5.0 Bayonet 38-0312
38-0852 3.5 Bayonet 38-0312 38-0839 38-0841
VT No. Gal Cap Type
38-0112 3.5 Screw Bung 38-0321 Big Twin 3.5 Gallon Bobbed Tank Sets with emblem mounts
38-0113 5.0 Screw Bung 38-0321 welded on. Tanks have shut off rod provision.
38-0165 6.0 Screw Bung 38-0321 3.5
With Welded On Emblem Mounts to accept 1966-72 emblems 3.5 Gallon 3.5 3.5 Gallon Gallon
38-0546 5.0 Bayonet 38-0312 Footshift Gallon Handshift Handshift
38-0543* 5.0 Bayonet 38-0312 Tank Footshift Tank Tank
*Note: Use pre1975 Petcock Right Side w/shut Tank w/emblem Kit with Emblem
Year
38-0115 off provi- with shut mounts emblems, Set
sion and off provi- and shut cap and
emblem sion and off rod shut off
mount emblems provision rod
38-0204 provision
38-0136 38-0469 1940-46 38-6696
4.5 Gallon Quickbob Gas Tank is a one piece tank to fit 38-0830 38-0835 38-0895 1947-50 38-6699
1948-84 Big Twin frames and features 1983-up filler necks. 38-0831 38-0836 38-0896 38-0574 1951-54
Mounts with stock hardware and uses 1975-up type petcock, 38-0817 38-0837 38-0890 38-0569 1955-56 38-7022
VT No. 38-0204 required for installation. 38-0818 38-0891 1957-58
VT No. Item 38-0819 38-0839 38-0892 1959-60 38-6670
38-0115 Tank 38-0820 38-0840 38-0893 38-0571 1961-62 38-6162
38-0204 Mount kit 38-0821 38-0841 38-0894 38-0572 1963-65 38-6695
38-0321 Cap Set 5 Gallon Footshift Tanks with emblem mounts. Uses 35-9247 pet-
Important Gas Tank Information: All tanks are shipped unpainted unless otherwise noted. Caps and cock and does not include caps or emblems.
petcocks are not included. Carefully check the new tank for flaws and fit before painting. Do not grind or
sand the seams or joints. Clean the inside of the tank and it is suggested to pressure test and use a tank 38-0546 1966 38-6682
sealer. Check petcock openings, making sure the petcock can be easily installed. Use proper hardware
to mount tank, including correct bushings, brackets and spacers required for assembly. Tedd Cycle, Inc.
38-0584 1967-72 38-6682
is not liable for paint work or labor claims of any kind. Tedd Cycle, Inc. is not the manufacturer of the gas
tanks.
*Note: All tanks with shut off rod provisions may require fuel rod alignment before installa-
tion of shut off assembly.
724
Gas Tank
38-0140
38-0469
38-0183
38-0136
38-7011 38-0943 38-0924
38-6696 38-6679
38-0108 Knucklehead 3.5 Gallon Bobbed Gas Tank Set. 1940-46 fea-
tures handshift mounts and shut off rod provision, order shut off
CLASSIC
rod and seat kit separately. 1936-40 features handshift mounts
and accept petcock VT No. 35-0497. Tanks are also available
with 3 mount strips welded to each side to attach 1940-46
1940-46 Emblems and Trim emblems and stainless trim. Order emblems and trim separate-
38-7011 Emblem Mount Set, Adhesived Mount ly. Note: All Pre 1965 tanks use two vented caps.
38-0943 Chrome EL UL Years Dash Mounts
38-0924 Parkerized 38-0183 38-1937 1937-39 S Without
38-0108 Weld On Mount Strips 38-0140 38-1942 1940-46 S Without
38-6696 Emblem Set 1941-46 38-0136 38-0861 1940-46 S With
38-6679 Four Piece Stainless Trim Set 1941-46 38-0469 1940-46 S With
38-6681 Four Piece Trim Mounts 1941-46 38-0797 38-1948 1947-48 L Without
38-0508 6 piece Mount Set 38-0831 38-0862 1947-48 L With
38-0142 38-0787
38-0130 38-0797
38-0531
1948-65 Big Twin Bobbed Gas Tank Set features provisions

to accept early caps, reserve shut off rod and 2 or 3 lite dash.
Set also available with shifter gate mount holes and lower
shift lever mount tab. Order shift gates and mounting hard-
ware separately as required. VT No. 38-0130 requires use of
VT No. 7807-3 gas line fittings. 38-0130 includes chrome shift
handle. *Note: Custom Appearance
VT No. Gallon Reserve Shift
38-0796 3.5 Yes No
TT Tank Set is 2.8 gallons without the
38-0797 3.5 Yes Yes
dash cutout featuring a raw metal finish
38-0119* 3.5 Yes Yes
constructed of steel. Tourist Trophy gas
38-0142 3.5 Yes No
tank set is 2.8 gallons without the dash
38-0787 3.5 No No
cutout featuring a raw metal finish. Use
38-0130 5.0 Yes Yes
for either 2 side of gas or 1 side oil on
*Note: All Pre1965 tanks use two vented caps.
the right. Order hardware separately,
fittings and plugs not included. Fits
1941-84 FL.
VT No. 38-0531
725
1936-69 Big Twin Bobbed Gas Tank
38-1644 38-0208 38-0309
38-0206
38-1645
Gas Tank Mount Kit includes 3 tank mounts, brackets, shifter 38-1644
40-1255 38-0221
tube, 2 bayonet filler bings, lower threaded fitting insert, right
side fuel nipple and top threaded insert for the fuel rod. Gas Tank Repair Pieces include fillers, four piece tab set for
VT No. Fits Year top, bottom, right and left. Can be welded on stock and after-
38-1644 BT 1936-46 market tanks.
38-1645 45 1941-73 VT No. Item
38-0201 38-0208 Tab Set
38-0232 40-1255 Filler Neck, Bayonet
38-0206 Filler Neck, Late Bung type, right and left,pair
38-0221 Petcock Fitting, male, 1975-up
Shut Off Kits include rod and seat for Big Twin. 38-0309 Petcock Fitting, female, ³⁄₈ NPT
VT No. Year Type Top Cap Finish Seat Finish 38-1644 1936-46 Kit
38-0419 1941-49 VT Brass Chrome
35-0871 Oil and Gas Fittings Viton Tip
38-0232 1941-49 Replica Chrome Cadmium
38-0201 1950-65 VT Brass Chrome 38-0470 38-0472 Close Up
38-0537 1950-65 VT Brass/Chrome Chrome 38-0472
38-0231 1950-65 Replica Brass Cadmium
38-0226 Shift Mount Tab Kit includes two brackets
and tube for shift and 3 tank mounts for Shut Off Kits include rod and seat for Big Twin.
use on Big Twin hand shift tanks, must be Viton Tipped Top Cap Finish Seat Finish
welded on. VT No. 38-0226 38-0470 1941-49 BT Chrome Cadmium
Important Gas Tank Information: All tanks are shipped unpainted unless otherwise noted. Caps and
38-0471 1941-49 45” Chrome Cadmium
petcocks are not included. Carefully check the new tank for flaws and fit before painting. Do not grind or
sand the seams or joints. Clean the inside of the tank and it is suggested to pressure test and use a tank
38-0472 1955-65 BT Chrome Cadmium
sealer. Check petcock openings, making sure the petcock can be easily installed. Use proper hardware to
mount tank, including correct bushings, brackets and spacers required for assembly. Tedd Cycle, Inc. is not
38-1735 1955-65 BT Zinc
liable for paint work or labor claims of any kind. Tedd Cycle, Inc. is not the manufacturer of the gas tanks. 35-0291 Viton Tip
Gas Cap
Replica Eaton Style Gas Caps with correct knurls, depth and
markings.
Replicas!!
38-7034 38-7004
38-0535 38-0751
38-7054 38-7036 Replica Chrome Caps are the

taller profile for the authentic
look replacing 61103-36. VT
No. 38-7004 vented fits right
and left 36-64 FL-FLH stock
38-7049 tanks.
38-7051 38-7030 VT No. Item Year
38-7034 Vented Cap Set 1936-38
38-7004 Vented Cap 1939-64 Chrome/Each
38-7054 Vented Cap Set 1939-64 Brass
38-7051 Vented Cap, Parkerized, Each
38-7017 38-7033 38-7030 Vented Cap Set 1965-72
Vented/Non-Vented
38-7017 Non-Vented Cap 1965-72
38-7033 Vented Cap 1965-72
38-0435 38-0440 38-0751 Black 1936-52
38-7049 Eaton style, vented, 1942-52
38-1642 Locking, Eaton
726
38-0240 1948-84
Tank Mount
51-0674 9891-18 9893-18

Mounting Kit for 1936-84 Big Twin with Bobbed Style
Tanks includes special washers, studs, and bolts. VT No.
38-0200 includes spacers.
VT No. Type Finish
38-0200 Stock Zinc
9891-18 Stock Chrome
CLASSIC
9892-18 Stock Cadmium
9893-18 Stock Parkerized
51-0615 2524-2 Allen Chrome
12-2123 Rear Mounting Stud Only 1936-84
51-0100
51-0507
51-0521
51-0666
51-0121
Frame Saver Gas Tank Mount Kit includes front and rear tank
mounts. Mounts Bobbed tanks to custom or original frames.
Temporarily attach one tank piece by clamping bracket for a 51-0618
quick check of tank placement on custom applications. Bracket
assembly can then be welded in place.
VT No. Year Type
51-0521 1936-84 Stock
51-0674 1936-84 Stock
51-0615* 1985-99 Flat Side Mounts for Bob Tanks. “Our Original Frame Saver Kit” may
38-0240* 1985-99 Flat Side be welded to all 1936-84 Big Twin frames, stock or custom, to
*Note: Can also be used 1958-84 models when installing replace original brackets.
Flatside gas tanks. VT No. Item Year
51-0100 Complete Kit 1936-47
38-0204 51-0121* Complete Kit 1948-84
51-0507 Rear Mount Clips, pair
51-0666 Lower Frame Gas Tank Mount Set 1955-
51-0618 Fat Bob Tank Mount Kit 1941-84
*Note: Includes speedometer mount casting that has steering
damper pin hole.
Speedometer Mount
FX Tank Mount Kit mounts one piece FX or Quick Bob tanks Frame Casting must be
on 1973-84. welded. Note: Casting has
VT No. # OEM Item provision for steering damp-
38-0204 A-F –– Complete Kit er pin. Fits 1948-84 FL.
38-0220 A&B –– Spring and Clip Kit VT No. 51-0067
38-0205 A 61546-74 Spring Clip Small Type Gas Tank Mount Horseshoe can
13-0155 B 61550-73A Spring 28-0644
be used on 1 piece FX or quick bob tanks. Stock
28-0644 C 61139-73A Horseshoe, Small Type OE replacement type. Rubber measures 2⁷⁄₈”W x
28-0614 C Horseshoe, Large Type 2¹⁄₂”H. OEM No. 61139-73A. Fits 1973-84 FX.
28-0615 D 61152-65P Rubber Bushing VT No. 28-0644
28-0617 62123-66 Button Bumper
28-0616 F 61562-66 Cup Bumper 727
Dash Assembly 39-0383
Chrome Cast Dash Panel
includes lens set for 1968-
90 models.
39-0914 VT No. 39-0383
39-0450
39-0914
FLH Dash Kit features chrome cast dash with lens and
hardware, 6-post switch, choke cable and knob, all mounting
hardware and trim strips. Stock on 1968-84 FLH. Can be
adapted to all 3.5 or 5.0 gallon tanks. Dash base has wiring
and sockets. Choose the proper speedometer cable for each
application.
VT No. Type Chrome Long Rider Dash Panel is constructed of ABS plastic.
39-0913 1:1 Ratio and fits bobbed tanks on 1968-95 FLH-FXWG-FXST models.
39-0914 2:1 Ratio Rubber strip included.
39-0972 As Above without Speedometer VT No. 39-0450
39-0967* As Above without Speedometer 39-0974 Long Rider Dash Kit with speedome-
39-0919 1:1 Ratio with Tach ter and switch for 1948-95 Big Twins.
39-0920 2:1 Ratio with Tach VT No. Ratio
*Note: Includes plain unwired dash base. 39-0973 2:1
Speedometer Adapter Ring 39-0974 2240:1
adapts to late model speedom-
eter into FLH style steel dash
cover. FLH Dash is shown 37-9121 37-9122
with adapter ring installed VT
No. 39-0130, adapter ring
must be affixed with an indus-
trial adhesive for a leak proof Chrome Dash Mount Stud Kit includes stud, nuts, nylon
seal. VT No’s 39-0124 and washer and either skull or acorn nut kit. Fits 1968-up cast dash
39-0192 include chrome ring panels on FXST-FL-FXWG when choke cable is not used.
and bracket to mount electron- VT No. Type
ic speedometer in FLH style 37-9121 Acorn
VT No. Fits dashes. 37-9122 Skull
39-0130 FLH type, chrome 37-0573 Stud only
39-0124 1995-up XL and FXD includes mount bracket and Choke Cable Nut Kit includes nut, and seal
adapter ring to fit 2 or 3 light dash and cast dash. for dash mounted choke on FL-FXWG-FXST
Dash Panel Decal fits 1979-93 FL-FLH-FXWG models.
models. Has a black matte finish, and an adhesive VT No. 37-8942
back, 5 pack.
VT No. 48-0423 39-0480 39-0487 39-0481
1975-95 Dash Hardware Kit
includes parts pictured to fit
the FLH-FXWG-FXST cast 39-0482
type dash, stock or
39-0382 39-0383.
VT No. 39-0382
Late Dash Parts. Pieces fit late cast dash panel 1968-95
39-0070 39-0072
FLH-FXWG-FXST.
5” Fat Bob Speedometers
VT No. Item
Unassembled Assembled Face Glass Needle Ratio MPH
39-0345 Support
39-0480 White Flat Black 2:1 120
39-0347 Retainer
39-0487 White Dome Black 2:1 120
39-0348 Lens clip
39-0481 Bull Eye Dome White 2:1 120
Chrome Billet Clock Assembly fits ⁷⁄₈” or 1” 39-0482 White Dome Orange 2:1 120
handlebars. Police
VT No. 39-0785 39-0862 Police Flat Red 2:1 100
39-0868 39-0070 Police Flat Red 2:1 120
39-0864 39-0072 Police Flat Red 1:1 120
*Note: Personalized by Motor Shop
728
Dash Kit
39-0907 39-0910 39-0908
2 Light 3 Light
Dash Dash
Two or Three Light Dash Kit is complete as illustrated.

V-Twin Original Dash Kits First Offered in 1984! Includes either 1:1 or 2:1 ratio speedometer and the correct five
post key switch with two keys. Order plainbase dash kit when it
39-0115 is not desired to rewire harness for dash lighting. Choose prop-
er cable for each application. Can be mounted on 1947-84 FL
Big Twin models.
VT No. Type
CLASSIC
39-0904 3 Light Plain Base 1:1
39-0951 3 Light Plain Base without Speedometer
39-0344
39-0114 39-0907 2 Light Plain Base 2:1
Steel Dash Panel Components 39-0908 3 Light Wired Base 1:1
VT No. OEM Item Light 39-0909 2 Light Wired Base 1:1
39-0234 2 Light Lens Kit 2 39-0910 3 Light Wired Base 2:1
39-0349 71300-47 Lens Holder 2 39-0911 2 Light Wired Base 2:1
39-0115 71350-47 Lens 2 33-0534 Bulb Socket, pair
39-0354 71310-38 Cover Plug, 1939-67 All
39-0915 39-0918
39-0353 71311-47 Cover Side Plate 2
39-0344 71292 62 Shield 3
39-0114 71091-59 Lens Set 3
71351-59 2 Red, 1 Blue 3
V-Twin Dash Kits are available with the popular tachome-

ter-speedometer combination included. Can be wired to 1978-
up FX-FL models with a tach that is triggered by coil impulse.
See instructions for tach wiring. Wired base includes light
sockets and all hardware for installation.
39-0111 39-0110 39-0144
VT No. Type Ratio
Two and Three Light Dash Panels. Two light fits 1947-61 Big 39-0915 2 lite 2:1
Twin and 45 models. Three light type fits 1962-67 Big Twin. 39-0916 3 lite 2:1
VT No. Type Item Finish 39-0917 2 lite 1:1
39-0111 2-Light Dash Chrome 39-0918 3 lite 1:1
39-0953 2-Light Dash Raw 7716-2 39-0123 Dash Panel Mounting
39-0952 3-Light Dash Raw Stud and Center Screw
39-0110 3-Light Dash Chrome features chrome domed
28-0542 Strip Rubber center screw, stud and
39-0144 Without key switch hole Chrome lock nuts to mount two light
39-0459 Rail Kit Deco Chrome steel dashes to 1947-67.
VT No. Item
7716-2 Kit, Colony
39-0123 Kit, V-Twin
39-0226 Center Stud
8483-2 Center Screw only
39-0155 Lock Tab only
32-8013
Dash Insulator and Bolt Hardware Kit is

39-0893 sold in three pack, for dash rebuilding.
39-0892
VT No. 32-8013
Chrome Dash with 91.5 mm speedometer hole accepts elec-
tronic speedometer from XL-FXD models.
VT No. Type
39-0892 Smooth
39-0893 3-Light
729
Tank Divider 28-0653 Black Replica Tank Divider
replaces 61122-39 when a
seat “T” bar is used.
Chrome Die Cast Tank Trim
Panel replaces existing rubber VT No. 28-0653
divider on 1968-84 FL with die
cast dash. Replaces 61142-82, Black Rubber Tank Filler Strip fits1979-81 FLH
attaches by supplied rubber ring. models.
VT No. 39-0343 VT No. 28-0715
39-0343
Plastic Panel replaces 61125-72 on 1971-

72 FX Nitetrain or can be used on FX-FL
models with die cast dash and frame mount Chrome Panel Edging slips on sheet metal dash
seat. VT No. 28-1990 panels, hub cap edges for decorative use, 10 foot
roll. VT No. 37-8943
Rubber Tank Divider fits between three or
five gallon bobbed tanks when seat T bar is
not used.
28-0652 39-0356
VT No. 28-0652
39-0106
39-0355
Chrome Dash Aprons are for Big Twins when plunger type
seat is used with T-Bar.
39-0108 39-0104 VT No. Fits Dash No.
Chrome Tank Panels fill the gap between 3 and 5 gallon 39-0355 Cateye Type Dash 39-0112
Bobbed type tanks. 39-0356 Lowrider Type Dash 39-0117
VT No. Years Type Style 1936 Knucklehead Oil
39-0107 1939-64 Full Plain 40-0844 Line and Gauge.
39-0108 Custom Full Plain 40-0896 VT No. Item
39-0106 1947-84 FLH Plain 40-0896 Line
39-0104 1977-84 FXS Plain 40-0844 Gauge
39-0478 Hooks Set
Note: VT No. 39-0106 style mounts under steel dash panel two
and three light and with large O-Ring. VT No. 39-0108 and VT
No. 39-0104 mount on front tank bolts and frame tube.
1937-38 Knuck Dash 28-2020

39-1779 39-0777 39-0419
39-1780 39-0749
39-0035 28-2007 39-0033
39-0994
39-1530 39-0747 39-0061
39-0030
Dash Panels. 1936 Style Skull Dash Lenses and Lens Kits. Includes two lenses
Raw Chrome Black Year and retainer rings.
39-1779 39-0777 39-1530 1937 VT No. Item
39-1780 39-0749 39-0747 1938 39-0419 Red, Clear and Green Lens Set with gaskets
39-0616 1937 Dash Panel Kit includes a 28-2020 Dash Hardware Kit
chrome dash, lens frames, lens 28-2007 Rubber Speedometer Plug
tunnels and a set of lenses. Fits 39-0994 Speedometer Adapter Ring
39-0035 Lens Kit
1937 EL. 39-0033 Dash Lens Panel Raw Rim and Lens Set
VT No. 39-0616 39-0030 Tunnel Parkerized Set
39-0061 Tunnel Kit with 2 tunnels, rim set, red & clear lenses. 1937
730
Cateye Dash Cateye Dash Kit is complete as
39-0156 39-0903
39-0145 Installed illustrated. Packaged on 18” x 24”
board for point of purchase display.
Can be ordered with either plain
(39-0129) base, with sockets and
bulbs. Includes either 1:1 or 2:1
ratio speedometer and the correct
five post key switch with two keys.
39-0128 39-0129 39-0127 Order VT No. 39-0129 “Plain Base”
dash kit when it is not desired to rewire harness for lighting
base. Order cable separately. Can be mounted on 74 and
80 Big Twins 1936-84 models, 1936-73 45 models fitted with
1947-up style tanks.
VT No. Type
39-0900 1:1 With Plain Base
39-0901 2:1 With Plain Base
Cateye Dash Base 39-0902 1 1 With Wired Base
VT No. Fits Type 39-0903 2:1 With Wired Base
CLASSIC
39-0159 1939-46 Cateye Rebuild Kit 39-0899 Without Speedometer with Plain Base
2714-36 Restoration Hardware Kit Dash Plate Mounting Kit contains all
2714-36T As Above hardware required to properly install the
39-0156 1936-37 Skull dash plate & cover on all 1936-46 BT.
39-0455 1938 Skull VT No. Item
39-0145 1939-46 Replica Kit 39-0184 7715-6 Stud Kit
39-0229 1939-46 V-Twin 39-0201 Switch/Stud Kit
39-0408 1939-46 Base 39-0523 Lens Kit
39-0127 1936-46 Custom 39-0232 Lens Kit
39-0201
39-0129 1936-84 Custom
39-0128 1939-46 Wired
39-0184 1936-46 Replica Complete with harness 2561-2
39-0408 1939-46 Bare Dash 2562-2
39-0241 1939-46 Dash Assembly (A) Cateye Dash Lens Kit replaces 71340-39 and 71341-39. Sold in a set.
VT No. Finish
2714-36 39-0113 Chrome
39-0206 Parkerized
39-0208 Zinc
(B) Dimmer Switch. Cateye dash mounting plate dimmer switch with knob.
Replaces 71600-39.
VT No Item Year Finish
39-0119 Complete Switch 1939-46 Chrome 39-0230
39-0225 Complete Switch 1936-38 Replica
39-0230 Complete Switch 1939-46 Replica
2560-2 Switch Knob 1943-46 Chrome
2714-36T 2561-2 Switch Knob 1943-46 Parkerized 39-0225
2562-2 Switch Knob 1939-43 Chrome
39-1529 Switch Handle 1936-38 Alloy, Replica
2610-1 Switch Handle 1937-38 Cadium
2609-4 1937-46 Contact Springs
Replica 1939-46 Cateye Dash 39-0448 Knob Kit 1939-46
Base Parts. (C) Early Reset Knob. Original knurled type, clear stamped two and three, and
VT No. Item cateye dashes on early models.
2714-36 Mount Kit VT No. 39-0336
(D) Panel Lamp Shields
2714-36T Mount Kit VT No. 39-0359(E) Panel Side Plate. VT No. 39-0350
33-2046 Bulbs 2810-13 Switch 1937-38
2862-2 Contact Spring, cad 2811-13 Switch 1937-46
2609-4 Contact Spring Kit 39-0360
39-0863
39-0898 39-0447 39-0112

Cateye Dash Cover fits 1939-46 Big Twin and 45 models.
39-0894 Includes lenses and rubber trim.
VT No. Finish
39-0360 Raw
Pre-War 1939-41 Cateye Dash Panel V-Design 39-0522* Raw (Profile for 1942-46) 49-0834
VT No. Finish 39-0446 Black
39-0863 Black 39-0898 Black
39-0894 Chrome V 39-0447 Chrome
28-0541 Rubber Trim 39-0112 Chrome
39-0831 Raw Oiled 49-0834 Dash Mounted Choke Control
*Note: Dash Cover Only. Does not include lens set, trip knob
side plate or rubber trim. 731
Wiring Harness/Dash Base Assembly
39-0182
2713-42
39-0958 39-0963
39-0187
32-1871
39-0960 39-0959
Replica Dash Bases feature correct shape and bulb sockets.
39-0184
VT No. Year Type
Replica Wiring Harness /Dash Base Assemblies include
39-0958 1948-58 2-Light
harness pre-wired to dash base, five or six post key switch,
39-0963 1959-61 2-Light
terminal box, horn button, dimmer switch, headlamp connec-
39-0959 1962-67 3-Light
tion, speedometer lamp socket and front terminal board when
39-0960 1968-95 Cast
required. Switch and wiring tested after final assembly.
2713-42 1947-95 Insulators
VT No. Type Year/Model Generator
Late Dash Base/Ignition Switch
Generator Models
Spacers for spacing dash base
39-0834 1936-37 EL
and switch in relation to tanks,
39-0184 2-Light 1939-46 Big Twin 3 Brush
packs of 10.
39-0190 2-Light 1947 Big Twin 3 Brush
VT No. Size Type
39-0422 39-0118 39-0189 2-Light 1948 Big Twin 3 Brush
39-0420 .030 Dash
39-0421 .060 Dash
39-0183 2-Light 1958 Big Twin Neutral 2 Brush
39-0422 .120 Dash
39-0181 2-Light 1959-61 Big Twin, Neutral 2 Brush
39-0118 .040 Switch
Dash Mount Hardware includes
32-1871 Harness 1948-69
bolts, spacers and hardware to
Big Twin Electric Start Models
install 1948-98 type dash mount
39-0185 3-Light 1965-67 2 Brush
bases on 1984-98 FXST-FLST
39-0186 5-Light 1968-69 2 Brush
models with flat side tanks.
39-0196 5-Light 1970-71 ALT
39-0209
39-0197 5-Light 1972 only ALT
VT No. Item 39-0187 5-Light 1973-77 ALT
39-0209 Kit 39-0198 5-Light 1978-79 ALT
39-0210 Spacer, Front 39-0199 5-Light 1980-84 ALT
Dash Base Boot fits
39-0214 Spacer, Rear
1965-95 models.
28-0403 Rubber Strip
VT No. 28-0412 Note: Order the appropriate factory service manual to
28-0562 Rubber Bushing
39-0596
Light Sockets available with a steel
33-2007 or plastic body. Bulbs are included.
39-0594 39-0994 VT No. Item
33-0129 1 wire, 3 pack
33-3065 1 wire, 3 pack
33-1983 2 wire, 3 pack, plastic
Dash Rings and Plate Note: Bulbs not included
VT No. Item 33-2007 2 wire, 3 pack, steel
39-0594 Mounting Ring Socket has ground wire
39-0596 Dash Plate 33-0534 2 Wire, Insulated type, pair
39-0994 Speedometer Ring 33-0531 Speedometer socket
39-0138 39-0944 33-0136 12V Bulb
33-0244 6V Bulb
Dash Mounting Plates available plain.
VT No. Fits Year
39-0138 2 and 3 1948-95
39-0207 All 1948-95
39-0944 Cast 1973-95
732
39-0335 39-0389 39-0319 39-0933
FX-FXRS Gauge
Replacement Clear Lens replaces fogged,
cracked or broken lenses on stock gauges
for 1982-83 FXR models. Cut off old lens and
plastic-seal new one in place. Sold each.
VT No. 39-0391
Speedometer Heads fit front wheel drive.
VT No. Type Model 31-3964
39-0335 0-140 MPH 1976-83 FX-FXE-FXS
1981-84 FX-FXE-FXS
39-0389 10-120 MPH 1973-83 FX
39-0319 10-150 MPH 1973-83 FX 39-0372
39-0933 10-120 MPH 1983-94 FXRT
Replacement Electric Tachometer Speedometers are the black plastic style. Complete units
reads 0-8000 RPM. Order lamp separate- include bracket. Bracket, replacement plastic lens, and fork
ly. Replaces 92042-78A. Fits L1978-84 tube plugs to accept bracket mounting are sold separately.
FX-FXE-FXS. The bezel has an outside VT No. Fits Item
CLASSIC
diameter of 3.42”. 39-0372 10-150 MPH/ 1975-83 FX
VT No. 39-0318 1982-83 FXR-FXRS Speedometer
31-3964 67316-74 Chrome Speedo Bracket
39-0120 FX Dash Mount Hardware 39-0391 Clear Plastic Lens only, each
F D 33-0133 71090-64 Mini 12V Bulb, 10 pack
Complete for 1977-84 gauges on
Kit FX-FXE or use speedome- Tachometer and Speedometer Covers
B are formed to fully cover plastic encased
ter and tachometer brackets
38-0212, 38-0213 to mount instruments on 1982-83 FXR models.
E A VT No. 42-0350
gauges in other types of
housing.
VT No. # Item
28-0619 A Iso Mount ⁵⁄₁₆
28-0546 B Iso Mount ¹⁄₄
38-0212 E Speedometer Bracket
38-0213 F Tachometer Bracket
39-0120 A-F Dash Mount Kit
Complete Dash Assembly for 1977- 39-0143 39-0139 39-0140
84 FXS includes chrome cover, electric Speedometer and Tachometer Brackets.
tachometer, speedometer drive, trip cable, VT No. Use
indicator lamps, mount hardware and 39-0143 Single Gauge Housing for 1973-up FX
cable. VT No. 39-0177 39-0139 Speedometer & Tachometer Housing for 73-82 FX
39-0140 Cup for Speedometer and Tachometer,
FX Gauge Housing fits 1977-84 FXS- 1973-82 FX-FXE
FXEF-FXB models. Order rubber gap seal 31-3963 Chrome Tachometer Bracket, 1974-84
separately. 33-1962
VT No. Item
39-0117 Chrome Dash
28-0540 Black Gap Seal 39-0121
37-9063 Dash Cover Plug, chrome
39-0117 39-0122
39-0233 Black Dash
Reset Cable and Knob replaces 67210-73. Used on all 1973-
FXS Chrome Dash Screws fit 1977-85 low up FX except 1981-82 FXWG and late 1984-up FXE-80 models.
rider models, four piece sets are available in VT No. 39-0121
acorn or allen type screws. High Beam Blue Indicator Lamp with two wire leads. Use on
Acorn Allen Acorn Allen all 1977-up FXS, all FX models, 1980-82, FXE-80 and 1980-up
8016-4 37-0441 8775-4 FXWG.
8775-4T VT No. 39-0122
Chrome Dash Dress Up Kit includes
dash, panel, rubber strip and chrome allen Red Generator Lamp with two leads fits 1972-74 FX, 1977-85
screws. Fits 1977-84 FXE-FXS. FXS.
VT No. 39-0912 VT No. 33-1962
Chrome Center Tank Panel for the split
tanks of 1977-84 FXS-FXSB-FXEF-FXB.
Re: 2:1 and 2240:60 MPH Speedometer models.
The Difference is in the RPM. VT No. 39-0104
For example, 2:1 is 60MPH = 2000 RPM and 2240:60 is
60 MPH = 2240 RPM
733
Mini Gauge Kit 39-0367 39-0365
48mm Mini
48mm Deco or 60mm Mini Speedometer and Tachometer
Kits include gauge, chrome bracket and rubber handlebar
clamp and proper cable which can be installed without any
adapters or modifications.
48mm 60mm
Deco Mini Ratio Model/Years
Speedometer
39-0365 39-0314 2:1 1936-67 FL 39-0314
39-0368 39-0315 2:1 1973-95 FX, 1981-84 FL
39-0370 39-0371 2240:60 1981-96 FXST-FLST
— 39-0316 1:1 1968-80 FL, 1971-72 FX,
1980-83 FXWG
Tachometer 60mm
39-0368
39-0367 39-0392* Electric three wire type Deco
31-9997 Fits All Chrome Y mount
33-2008 Fits All Light socket with bulb 39-0858
39-0860
33-2047 Fits All 12 Volt bulb, 10 pack
Note: For use on 1978-up models with coil triggered tachom-
eter. Green Negative wire goes to negative side of coil. Red
wire goes to ignition side of key switch. Tachometer head
must be grounded by black wire.
Cable 36-0512 fits 39-0314 and 39-0316 kits.
Cable 36-0603 fits 39-0315 kits. 60mm Mini Electronic Speedometer and Tachometer.
39-0550 Speedometer features easy push button recalibration and
re-setable trip meter, with LED lighting. 8000 RPM Tach has
LED lamp. All units have black face and include clamp. Order
12mm speedometer cable separately.
Three functions are (1)accumulated mileage (this can not be reset), (2) Trip One
(can check total mileage for one full gas tank, can be reset to zero), (3) Trip Two
(calculate mileage from A to B destination, can be reset to zero).
VT No. Ratio Item
39-0456 39-0436
39-0858 2:1 Speedometer
39-0860 0-8000 RPM Tachometer
39-0417
Mini Gauges include cable and mount clamp
Note: 39-0556 and 39-0437 includes left side speedometer
drive. 38-0550 and 39-0556 feature indicator lights.
• Blue-High Beam
• Green-Neutral
• Red-Oil
• Yellow-Turn Signals 39-0434
48 mm 60 mm Ratio Item Year
39-0550 2:1 Speedometer 1973-94
39-0436 2240:60 Speedometer 1981-94 Softail
39-0437** 39-0556** 2:1 Speedometer 1995-99
39-0438 39-0576 1978-up Tachometer Custom
39-0456 39-0456 Knob Speedometer Multi-Colored Mini Gauges. 60mm gauge features a 2.4” pol-
33-2043 Light Socket ished stainless body with a white face, total length of 2.7”. Units
39-0550, 39-0556 have indicator lights, when installed Pre- include a chrome bezel with choice of red, orange, blue, yellow,
1990 models tap into orange wire exiting turn signal flasher white, green or purple by the push of a button. Works on 12v
1991-up models signal indicator light cannot be used systems. Tachometer adapter required for use with single fire
**Note: Includes 2:1 ratio left side speedometer drive unit. ignition. Speedometer accepts 12 mm drive cable. Order clamp
60mm Electronic Tachometer/Speedometer fits separately.
1978-up models. Unit includes gauge, bracket and VT No. Gauge Ratio
clamp. 39-0417 Speedometer 2:1
VT No. Item 39-0434 Tachometer Electric
39-0392 Tachometer
39-0203 Housing
80mm Electronic Tachometer features stainless
housing and Y bracket. Fits 1978-up. 39-0605
39-0602 39-0603 39-0604
VT No. 39-0563
Chrome Billet Gauge Holder fits 48mm or 60mm gauges.
Chrome Clamp includes molded rubber insert to 48mm 60mm Holes Type
attach mini gauges to handlebars for less vibration. 39-0602 None Single
VT No. 28-0325 39-0603 2 Single
39-0604 39-0613 None Dual
734 39-0605 2 Dual
FLH Speedometers have ⁵⁄₈” male
fitting to attach cable as listed. Replica Speedometer
2:1 Speedometer features long style 39-0428 39-0427 39-0426
black early needle with white back-
ground with black number reading
10-120 mph, accepts reset knob VT
No. 39-0134. VT No. 39-0328
Replica Speedometer
Production since 1983!
39-0328 Over 50,000 Served! Replica Speedometers feature glass lens with stainless narrow
39-0302 bezel in 2:1 ratio with a ⁵⁄₈” male cable fitting. Reset knob included.
39-0769 39-0770
VT No. Year Needle Type Glass Unassembled Assy
1936-39 Black Thin Flat 39-0480
39-0428 1936-39 Black Thin Dome 39-0487
39-0427 1940-45 White Airplane Dome 39-0481 39-4045
39-0426 1946-47 Orange Airplane Dome 39-0482 39-4647
Speedometer Rim and Lens Installation.
VT No. 60-0743
39-0306 39-0326 A B
CLASSIC
A-Black 0-120 MPH and replaces 67004-68A, accepts reset
Silver and Black Graphic Speedometers knob 39-0134.
VT No. Ratio Needle Face VT No. Ratio Needle Face
39-0302 1:1 Red/White/Black 0-120 MPH 39-0307 1:1 Red/White/Black 0-120 MPH
Silver-Black (1-12) with silver numerals 1962-67. B-Police Special Speedometers feature black face with
VT No. Ratio Needle Face white numerals and needle.
39-0306 1:1 Red 1-12 VT No. Ratio Needle Face
39-0326 2:1 Red 1-12 39-0671 1:1 Red 0-120 MPH
39-0932 2:1 White 0-120 MPH
39-0304 39-0861 39-0301 39-0993 39-0327 2:1 White 10-100 MPH
39-0862* 2:1 Red 10-100 MPH
39-0303 1:1 White 10-100 MPH
39-0322 1:1 White 0-120 MPH
39-0864* 1:1 Red 10-100 MPH, Police
39-0857 2:1 Red 10-100 MPH, Police
*Note: 39-0862 and 39-0864 are not assembled.
39-0396 39-0385 39-0930
1948-61 Type Green features gold backing with green and
black. VT No. 39-0301 is green and black on a glass face. VT
No. 39-0374 and VT No 39-0993 have a red face.
VT No. Unassembled Ratio Needle MPH
39-0304 1:1 Red 10-120 MPH C C C
39-0861 2:1 Red 10-120 MPH
C-Late Style Graphics
39-0301 39-0525 2:1 Red 1-12 MPH
VT No. Ratio Needle Face
39-0993 2:1 Red 1-12 MPH 39-0396 1:1 Red 10-120 MPH
39-0385 2: 1 Red 10-120 MPH
39-0930* 2:1 Red 0-120 KMPH
Bob Dash Speedometer Cable
adapts to speedometer with 5/8”
large male thread, as used in kits to
transmission or front wheel drive..
VT No. Length Type Fits
36-0607 39½” Front Wheel All
36-2444 39½” As Above with Stainless Steel
Speedometer Lamp Socket 36-0126 39½” As Above with Stainless Clear Coat
with bulb replaces 71151-48. 36-0610 42½” Front Wheel All
VT No. Type 36-2548 42½” As Above with Stainless Housing
33-0531 33-0529 33-0531 Vinyl Wire 36-0621 35” Transmission 1936-80 Big Twin
33-0529 Cloth Wire 36-0897 Adapter Male to Female
33-0133 12 V Bulb Ratios
2:1 Ratio Bob Speedometers fit 1936-61 Big Twin transmission drive type
33-0132 6V Bulb ,1936-61 45 models and Servi-Car models
33-3065 Vinyl Wire 1:1 Ratio is for 1962-73 Servi-Car, 1962-80 FL-FLH
2240:60 1980-84 FLH
735
Speedometer 39-0609
A B
39-0731
39-0730
C D Multi-Ratio Speedometers are programmable for 1:1, 2:1 or
2240:60 ratio and feature a LED odometer readout or full digital
readout. Will accept 12 or 16mm (⁵⁄₈”) cable ends.
VT No. Type Style 39-0979
39-0731 Speedometer LED
39-0730 Tachometer/Speedometer LED
39-0609 Tachometer/Speedometer Digital
39-0979 Speedometer Digital
Replica Speedometers are for FL models. Features orange FLH Speedometer with Tachometer is
or white airplane style needles with silver numerals over black available in a 2:1 ratio. It features built in
background. Great for restoration of 1941-47 models. Reset
knob not included. *Note: Reset knob is not included. electric tachometer which operates from coil
VT No. # Ratio Needle impulse. *Note: Use ⁵⁄₈ speedo nut.
Ratios VT No. Ratio Year
39-0298 A 2:1 Army graphics 2:1 Ratio Bob
39-0534* A 1:1 Army graphics Speedometers fit 1936- 39-0387* 2:1 1941-61
39-0300 B 2:1 Orange needle 61 Big Twin transmission
drive type,1936-67 45 and
39-0976 2:1 Orange needle Servi-Car models.
39-0299* C 2:1 White needle 1:1 Ratio is for 1962-
39-0410 — Orange needle only 73 Servi-Car, FL-FLH
1962-80
39-0477 — White needle only
39-0458 D 2:1 White (Dome Glass)
39-0336 39-0406 39-0134 39-0993 39-0998
Replica Speedometers are original “Beck” aftermarket designs
39-0403 39-0121 of the 1950’s with red and white graphics on glass.
VT No. Ratio
39-0338 39-0993 2:1
Reset Knobs. Order for proper applications. 39-0998 1:1
VT No. OEM Years/Type 39-0333
39-0336* — 1968-84 Knurled
39-0406* — 1981-98 FL-FXST
39-0134 67215-68 1968-up FL with screw Lens Bezel
39-0211 67217-68 Screw for Above, 10 pack 37-0519
39-0403 67215-89 1981-95 FXST-FXWG Gasket
37-0519 67117-85 Screw for Above,10 pack 39-0451 39-0452
39-0338 Alloy All/Female
39-0121 67210-73 1973-84 FXE, Chrome
39-0764 1936-52
*Note: Knurled type fits most aftermarket FLH gauges
Speedometer Adapter Stud will allow the use
of 39-0134 later knob in speedometer with alloy
knob. VT No. 39-0173
28-1952
Bezel/Lens Kit fits FL speedometers kit, include stainless
28-2115 bezel, glass lens and sealing gasket.
28-0155 VT No. Years Lens Type
39-0333 1948-84 Flat
FLH Speedometer Isolation and Mount Kit mounts speed- 39-0451 1936-40 Flat
ometers with ³⁄₈” holes. Replaces 67066-76. Kit includes two 39-0452 1941-47 Dome
pins, clips, bushings and molded outer ring.
VT No. Item Glass Speedometer Lens and Parts.
28-1952 Kit VT No. Fits Type
12-0594 Snap Ring Only 39-0330 1936-40, 1948-up Flat Glass
28-0155 Kit 39-0331 1936-46, 1941-47 Domed Glass
28-2115 Rubber Ring
2629-4 Bolt Set, Cadmium 15-0681 1948-up Lens Gasket
28-0157 Pin Kit 39-0330
736
Police Speedometer
Male
Fitting
39-0932
39-0862 39-0303 39-0070 39-0071
CLASSIC
39-0322 39-0375 39-0072 39-0073
Stewart Warner Police Speedometers for FLH models. Fea-
tures a red needle.
VT No. Ratio Face
39-0070 2:1 39-0059
39-0071 2:1 39-0067
39-0072 1:1 39-0059
39-0073 1:1 39-0067
Police Special Speedometers feature a black face with white 39-0871 39-0872
numerals and needle.
39-0671 1:1 0-120 MPH
39-0932 2:1 0-120 MPH
39-0327 2:1 10-100 MPH
39-0862 2:1 10-100 MPH
39-0303 1:1 10-100 MPH
39-0322 1:1 0-120 MPH
39-0375 2240:60 0-120 MPH, 1980-84 FLH
39-0864 2:1 0-100 MPH, Police
39-0857 1:1 0-100 MPH, Police
39-0067 39-0056 39-1126 39-1127

Police Special Speedometers.
39-0871 1:1
39-0872 2:1
Vintage Face
39-0059 39-0067
39-1126 1:1
FLH Speedometer Tin Faces. Speedometer must be dissem- 39-1127 2:1
bled to install.
VT No. Year Models 39-0017
39-0309 1962-67 FL 39-0018
39-0310 1968 FL 39-0019
39-0465 1968 FL 39-0021
39-0311 1968-80 FL
39-0312 1968-80 Police FL
39-0067 Police 100 MPH 39-0465
39-0053 Army Speedometer Tins. For use with 1:1 or 2:1 ratio V-Twin Mfg
39-0056 Black mechanical speedometers with two screw mounts. Fits after-
39-0057 Cream market speedometers only.
39-0058 Bull’s Eye
39-0069 White VT No. Type 39-0053 Olive Tin
39-0082 Police 39-0017 Black Tin 39-0054 Black Tin
39-0021 White Tin, 0-100 MPH 39-0018 Black Tin 39-0055 Black Tin
39-0067 SW Police 0-100 MPH 39-0019 Black Tin 39-0060 Cream Tin
39-0021
39-0021 White Tin 39-0068 Black Tin
737
Wrap-Around Oil Tank
40-0489 40-0480 40-0279
40-0424
1936-57
40-0280 40-0426
Replica Oil Tank features wrap around type construction, includ-

ing seam-welded edges which show weld marks as on original 40-0472 40-0473
tanks. The 1958-64 type has battery rod tab supports. All have Replica Oil Tanks include original style
screw in dipstick except side fill, which has a rubber plug. 40-0475 and accoutrements in chrome or gloss
VT No. Finish Type Years
black finish.
40-0424* Black Stock 1936-57
Black Chrome Year
40-0432* Chrome Stock 1936-57
40-0489* Raw Stock 1936-57 40-0620 — E1936
40-0996 Black Stock 1958-64 40-0480 — 1936
40-0426 Chrome Stock 1958-64 40-0472 40-0279 1937
40-0429 Chrome Side Fill 1936-64 40-0623 40-0473 40-0475 1938-39
40-0280 Raw Pieces 1936-64 40-0623 Fitting 1937
40-0428 Chrome Dipstick Cap 1936-64 40-0325 Zinc Plated Valve 1937
40-0444 Zinc Dipstick Cap 1936-64 40-0614 Kit 1940-57
*Note: 1936-57 without battery rod tabs. 40-0617 Kit 1938-39
Three Quart Kick Start Oil Tank is for 40-0325 40-0328 — Liner
40-0412 swingarm frames with aluminum inner 40-1420 — Fitting Set
primary covers on 1965-84 models. Use Chrome Horseshoe Tank is a 3½
12N55A-3B VT No. 53-0505 battery, quart replacement for 1936-64 rigid or
clamps for battery must be fabricated. swingarm frames. Accepts stock 6 Volt
Chrome Item battery and original or custom braided
40-0412 Side Fill Oil Tank oil lines. Fits with tin inner primary only.
40-0491 Center Fill VT No. Item
53-0505 Battery 40-0636 Black
40-0493 40-0638 Chrome
40-0488 40-0809 40-0809 Center Fill/Smooth
31-0192 Rigid Bracket
37-0098 Drain Plug
40-0407 Chrome Magneto Oil Tank fits Big Twin rigid
or swingarm frames 1936-84. It has a 5 quart
Replica “Bobber” Rigid Frame Oil Tank fits 1936-57 Big Twins. capacity for big incher. It is not designed to
Tank is 1⁵⁄₁₆” shorter to accommodate a raised position for chain hold battery. Use with tin primary or open belt
alignment. Tank will accept mini 12 volt battery. drive only. Order rear bracket separately.
Chrome Black VT No. Item
40-0488 40-0493 40-0407 Tank
37-1018 Spacers 31-0192 Rigid Rear Bracket
31-1741 Base Plate 31-0191 Swingarm Rear Bracket, zinc
1937 Oil Tank Kit fits 37-9242 Drain Plug
1937-47 EL & 1941- Replica Dipstick includes a copper washer.
47 Knuckle. Chrome VT No. Item
seamless tank includes 49-7577 49-7560 1936-40, Cadmium
cadmium lines and 49-7577 1941-64, Cadmium
fittings. Early banjo bolt 40-0630 1941-64, Parkerized
configuration has a 15-0192 Copper Washer
great retro look. 2903-2 2903-2 1936-40 Cadmium
VT No. 40-0281 2907-2 1936-40 Parkerized
2908-2 2908-2 1941-64 Parkerized
2904-2 1941-64 Cadmium
738
40-0406
Oil Tank
40-0417 40-0834
40-0405
40-0413,
40-0626
40-0417
40-0405
40-0455 40-0414
CLASSIC
40-0406
Installed
Chrome Smooth or Hex Wrap Around Oil Tank installs on

FX-FL Chrome Oil Tank for 1965-84 stock FX-FL swing arm frames 1965-84 and houses the stock
models. Includes filler plug. Cap and filter FXE battery, VT No. 53-0518 and allows removal of battery
not included. VT No. 40-0455 kit includes without removing the tank from the frame. All fittings exit from the
chrome tank, cap, oil filter and mount kit. bottom of the tank on 3¹⁄₂ quarts.
VT No. Finish Item VT No. Type
40-0417 Chrome Tank 40-0406 Smooth, Can only be used w/Hitachi type starter motor
40-0834 Black Tank (65-69 FL) 40-0405 Hex Type
40-0626 Primer Tank 40-0408 40-0618
40-0410 Black Tank
40-0455 Chrome Kit
40-0413* 62483-81 1981-82
40-0414** 62504-82 1982-86
will not accept internal canister
*Note: Fits up to 1985, accepts Internal Canister.
**Note: Requires battery carrier bracket 42-9912 for FX mod- Electric Start Wrap-Around Oil Tank with four quart capac-
els and 42-9910 for FL models ity, fits 4-Speed stock rigid and swingarm frames pre-1984
Chrome Edging for Oil Tank is for use on
Big Twins, not FXR. It features built in battery box for VT No.
FLH-FXE 1965-84 model, and is fastened
53-0518 battery, FXE type. 4 quarts.
by stock screws. Replaces 62534-65.
Chrome Black Item
VT No. 42-0506
40-0408 40-0618 Oil Tank
Oil Tank Mount Kit is 1965-84 FXE- 31-0191 Zinc Rear Bracket
FLH. Includes zinc plated bolts and
hardware as illustrated to mount tank to 40-1289 shown
frame and battery box. VT No. 40-0320 installed
48-0426 48-0427
48-0958 48-1379 48-1380

Oil Tank Decals are FLH style. (5 pack except where noted)
Adhesive Water Based OEM Style
48-0426 — 62535-65 H, Long
48-0427 48-1379 62535-61A H, Lightening
— 48-0439 Decal “V” Bobber Oil Tank has top mount and holds 53-0075 battery.
48-0958 — Pair 3⁹⁄₁₆” x 1³⁄₈” Chrome Black Raw Item
— 48-1380 Each 3⁹⁄₁₆” x 1³⁄₈” 40-1423 40-1289 40-1425 1941-1957 FL, Top Mount
— 48-0838 Each Patent 40-0491 40-0616 40-1429 Rear Mount
739
Oil Cap 40-0504 40-9955
40-0503
40-0845
40-0495
Oil Temperature Dipstick for 1965-84.

VT No. Style
40-0503 Temperature
40-0495 Stock
Oil Tank Plug is constructed of rubber with Chrome Oil Tank Cap fits the stock type oil tanks on 1965-84
chrome cap for tanks which accept a push in FX-FL models. Replaces 62610-52A.
plug. VT No. 28-0219 VT No. Item
40-0504 Cap includes gasket and retaining ring assembled
40-0845 Cap with filter
15-0329 Gasket
40-9955 Dipstick
12-0970 Retaining Ring
Oil Tank Mount Hardware

31-0733 31-0734 42-9918 42-9940
Oil Tank Brackets.

VT No. Frame Fits
31-0733 All Front Both
31-0734 Swingarm Rear 42-9919
51-0150
51-0516
Oil Tank Repair Kit can be welded on to replace broken

42-9920 42-0877
bracket on original 1936-64 oil tanks. Full kit includes three
pieces. Chain guard tab set sold separately.
VT No. Item
51-0150 Kit
51-0516 Chain Guard Tabs
40-0280 Tank Pieces
42-0537 42-0760 42-0762
31-0355 Rear Brackets
51-0766 Kit, Update
31-0191
40-0768 Chain Guard Tabs
40-0766 3 Piece Bracket Set
31-0192
1936-57 1958-64 31-0190
Oil Tank Hardware. Items are plated as noted to fit wrap-around oil
tanks for 1936-64 models.
VT No. Item Finish
42-9919 Rod Set with pads Chrome
31-0190 U-Clamp Set Chrome
Oil Tank Mounting Kit includes fasteners and spacers to 31-0457 U-Clamp Set Parkerized
mount oil tank on Big Twin. 31-0910 U-Clamp Set Raw
1936-57 1958-64 Finish 42-9918 1936-57 Replica Rod Set w/pads & flags Parkerized
8213-8 9206-12 Cadmium Kit 8213-8 42-9940 1958-64 Replica Rod Set Parkerized
31-0192 1936-57 Rear Bracket Chrome
8213-8T Cadmium Kit, VT 31-0544 1936-57 Rear Bracket Parkerized
9602-8 9205-12 Chrome Kit 31-1055 1936-57 Rear Bracket Raw
9667-8 Parkerized Kit 49-0846 1936-57 Rear Bracket, replica Parkerized
37-9087 Spacer, Zinc 31-0820 1936-57 Rear Bracket Parkerized
37-9332 Spacer, Parkerized 31-0191 1958-64 Rear Bracket Zinc
42-9920 Lower oil tank plate Chrome
42-0877 Replica Oil Tank Plate Parkerized
42-0867 Replica As Above Chrome
42-0537 Battery Top Chrome
42-0760 Battery Top, Replica Black
42-0762 Battery Top, Replica Chrome
42-1275 1936-47 Top Kit
740 42-1276 1948-57 Top Kit
Steel Oil Lines are replace-
ments for 1936-64 Big Twin
Overhead Valve models. Lines
Steel Oil Line Set
1936-57 Overhead
come in chrome or cadmium for Valve Chrome
restoration. Supplied with nipple Steel Oil Lines fit
nuts already attached to fit wrap- S&S or SiftonTM Cast
around and stock oil pumps on Pumps when engine
Big Twin models listed below. is installed in a rigid
Order oil pump fittings separately. frame with stock
Swingarm Frame With Filter for 1958-64 models. wrap-around oil tank.
VT No. Item Pieces VT No. 40-0171
40-0103 Chrome Set 4 Rigid Frame
40-0377 Cadmium Set 4 40-0146
without filter,
40-0106 Chrome Filter, Line Set only 2 OHV models.
40-0371 Cadmium Filter, Line Set only 2
Rigid Frame With Filter for 1936-57 mod-
els. 40-0164
VT No. Type Pieces Chrome Cadmium OEM Type Year
40-0101 Chrome Set 4
CLASSIC
40-0099 40-0374 Set 3 Piece 1941-48
40-0375 Cadmium Set 4
40-0107 Chrome Filter 2 40-0163 40-0164 Set 3 Piece 1949-57
Line Set only 40-0111* 40-0144 63506-41 Return 1949-57
40-0370 Cadmium Filter 2 40-0108 40-0142 63572-38 Vent 1938-57
Line Set only — 40-0633 63511-38 Feed 1938-48
Swingarm Frame without filter 1958- 40-0109 40-0143 63511-38A Feed 1949-57
64 models. 40-0132 40-0135 63506-38 Return 1941-48
Chrome Cadmium OEM Type — 40-0145 3571-36 Feed 1936 only
40-0102 40-0376 3 Piece Set — 40-0146 3571-37D Feed 1937 only
40-0110 40-0133 63511-58 Feed — 40-0147 3572-36 Vent 1936-37
40-0131 40-0134 63572-58 Vent — 40-0148 3571-36A Return 1936-37
40-0165 40-0166 63506-58 Return — 40-0149 3571-38C Return 1938-40
*Note: Cross over to inside of tank for 1949-57 use.
40-0045 40-0046
40-0044
40-0505 40-0506
Oil Line Fitting Kit includes four cadmium plated fittings for
use with stock lines when an external oil filter is used. 40-0099
VT No. Fits
40-0505 1940-57 Rigid
40-0506 1958-64 Swingarm 40-0374
40-0507 Oil Line Set.
40-0044 1936 Cadmium
40-0045 1937 Cadmium
14-0529
9808-6 40-0046 1938-40 Cadmium
Big Twin Oil Pump and Filter Fittings in cadmium. 40-0374 1941-47 Cadmium
VT No. OEM Years Application 40-0099 1941 Chrome
40-0509 63533-15 1936-64 Oil Pump to Line 40-0088 40-0089
40-0510 26424-50 1950-64 Oil Pump Cover to Line
40-0508 63526-50 1950-57 Oil Pump Cover to Filter Line
40-0511 63525-50 1940-64 Oil Filter Line Connector
40-0528 63524-50 1951-64 Oil Filter Line Connector
40-0507 63527-50 1950-64 Oil Filter Line Nut 40-0087
40-0605 63871-50 1941-64 Oil Filter Cap Adapter Aluminum Oil Line Kits for OHV Knuckleheads.
Oil Nipple Cap is cadmium plated. Replaces 3583-15 to cap VT No. Year
oil fitting during storage. (Pack of 6). 40-0087 1940 EL
VT No. 9808-6 40-0088 1941 EL, FL
Oil Line Nut, Oil Line Sleeve Nut replaces 63527-50. 40-0089 1943-45 EL, FL Cadmium with parkerized nuts
Cadmium plated.
VT No. Item
40-0507 Nuts, pair
14-0529 Rubber Seal, 63529-50T 40-0507
741
Oil Line Fitting
40-0566 40-0521 37-0095
40-0519
40-0637
40-0635
Oil Line Fittings for ³⁄₈” hose. Thread is 1/8” NPT. Magnetic Drain Plugs prevent metal particles from circulating
Chrome Zinc OEM Type U/M through engine and transmission cases and oil tank.
40-0566 40-0635 63533-41 Straight, Replica 5 VT No. OEM Size Use
2070-1 As Above Each 37-0096 707 ¹⁄₂” - 13 74 and XL Transmission
40-0521 40-0637 Barbed Straight 5 37-0097 700 ³⁄₈” - 24 Big Twin Case Plug 74 & 80
40-0519 26496-75B 90 degree angle 5 37-0095 60348-65A ¹⁄₂” - 20 74 & 80 Inner Primary
37-0098 720, 706A ⁵⁄₈” - 18 Oil Tank and Timing Hole
37-0099 739A ¹⁄₈” - 27 NPT 1990-up BT Trans
37-8961 718 ¹⁄₄” - 18 NPT Chain Cover
Drain Plug Washer for use on 1952-up brass
crush-seal factory type. Replaces 62702-52.
(10 pack). VT No. 15-0194
Chrome Male Fittings for gas and oil measured in NPT
thread and inner diameter of line.
A-Straight B-90° Size
40-0525 40-0532 ¹⁄₈” NPT - ⁵⁄₁₆” Hose
40-0526 40-0529 ¹⁄₈” NPT - ¹⁄₄” Hose 40-0609 H
40-0566 40-0519 ¹⁄₈” NPT - ³⁄₈” Hose
Oil Fittings for Big Twin.
40-0527 40-0530 ¹⁄₄” NPT - ⁵⁄₁₆” Hose
VT No. # OEM Item
Chrome Male Female Fittings.
40-0566 F 63533-41 Straight
VT No. # Type/Size
12-1412 A 63533-65 Oiler Return
40-9990 C 45° ¹⁄₈” NPT - ¹⁄₈” NPT, Street Elbow
40-9982 B 63541-70 Oiler T, Rear Chain
12-1416 D 90° ¹⁄₈” NPT - ¹⁄₈ NPT
40-0579 E Chrome As Above
12-1419 E Straight ¹⁄₈” NPT - ¹⁄₈” NPT
40-0552 F 26314-99 Straight 1999-up
Male Plugs.
17-0519 E 62375-57 Elbow
VT No. # Size
40-0553 E 63554-90 Elbow
23-0611 F ¹⁄₈” NPT, Chrome
40-0531 F ¹⁄₄” NPT, Chrome Oil Vent “T” fits 71-84 Big Twin.
37-8777 G ¹⁄₈” NPT Hex Socket Plug, Plain VT No. 40-0559
40-0609 H ¹⁄₄” to ¹⁄₈” NPT
Oil Tank Drain Plug in stock chrome, cadmium Cadmium Oil Nipple Cap replaces 3583-15 to cap oil
or parkerized finish. fitting during storage. Pack of 6.
VT No. Finish Type VT No. 9808-6
8114-1 Chrome Stock
8115-1 Cadmium Stock A B C
Chrome 40-9975
9404-1 Cadmium Oversize
9304-1 Chrome Oversize
9714-1 Parkerized Oversize
9502-1 Chrome 1939-51 Stock
9504-1 Parkerized as above, ⁷⁄₈” Hex Stock
9503-1 As above cadmium Stock Nipple Nuts and Tube Ends will attach to tapered tank
Cadmium 37-9067 Washer 25 pack 63533-15 type fittings and will accept braid or rubber hose.
Banjo Bolts and Washers. Available straight, 90° or 45°, with chrome finish.
VT No. OEM Item VT No. # Item
40-0518 63678-36 Vent Line Banjo Bolt 40-9975 Nut, 3 pack
40-0670 63577-36 Vent Banjo Fitting 40-9992 A Straight Tube, with nut
14-0154 6440 Washer, Vent Lines, 10 pack 40-9993 B 90° Elbow, with nut
40-0156 3520-36A Bolt, Feed and Return, each 40-9994 C 45° Elbow, with nut 40-0514
40-0157 3570-36B Washer, Feed, 10 pack 40-0514 D Fittings
7612-3 Oil Line and Vent Line Fittings replace Rear Chain Oiler Fitting fits 1941-
type used on 1936-64 Big Twins. For braid- 69 FL, zinc. Fitting is positioned
ed stainless steel or stock rigid steel oil between the oil pressure gauge and
lines, three pieces. oil pump fitting. VT No. 12-1280
VT No. Type
7612-3 Cadmium
7148-3 Chrome
40-0514 Chrome
40-0297 Zinc
742
Oil Line & Fitting
40-0223 40-0214 40-0583
Fuel-Oil Hose in black, black braided or

clear.
Sold in shop rolls. Chrome Econo-Seal Hose Ends act as
Black Black Clear Size/Length clamp and finished end when stainless
Braided jacket rubber hose is cut. Micro clamp is
Chrome Oil Line Fitting Set allows use
40-9999 — — ¹⁄₈” x 25’ hidden under chrome end.
of ³⁄₈” braided steel lines. Set has built
40-0117 — — ³⁄₁₆” x 25’ Smooth Hex Fits Qty
in compression fittings, so no need for
40-0118 — — ¹⁄₄” x 25’ 40-0222 40-0213 ¹⁄₄ 6
clamps. Reusable three piece set. ¹⁄₈”
40-0119 — 40-1252 ⁵⁄₁₆” x 25’ 40-0248 — ⁵⁄₁₆ 6
NPT. For early TC-88.
40-0254 — — ⁵⁄₁₆” x 6’ 40-0223 40-0214 ³⁄₈ 6
VT No. 40-0583
40-0814 — — ⁵⁄₁₆” x 6’ 40-0224 40-0218 ¹⁄₄ 2
40-0769 — — ⁵⁄₁₆” x 20’ 40-0249 — ⁵⁄₁₆ 2 31-0125
40-0253 — — ³⁄₈” x 6’ 40-0225 40-0219 ³⁄₈ 2
40-0120 40-0765 — ³⁄₈” x 25’ — 40-0220 ¹³⁄₁₆ ID 1
40-0591 15mm 2
CLASSIC
40-0767 — — ³⁄₈” x 20 —
— 40-0592 17mm 2 Zinc Oil Hose Support Bracket.
— 40-0763 — ³⁄₈” x 10’
Polished VT No. 31-0125
40-0126 — — ¹⁄₂” x 25’
Stainless
Steel Hose
35-0413 40-9976
Lock is a com-
40-0524
Stainless Hose Clamps are available pression fitting
in Worm Gear type or Torro drive type. that replaces
35-0180
Torro drive clamps feature pressed tooth conventional Chain Oiler Fitting replaces 60549-70
and raised band edges to prevent dam- hose clamps. Feature a cleaner appear- on 1970-84 FL-FX models. It attaches to
age to hose. ance and superior sealing performance. inner primary cover. Sold each.
Worm Gear Size Type Pair Each Size VT No. Type
35-0413 ⁷⁄₃₂”-⁵⁄₈” Fuel 35-0180 35-0175 ¹⁄₄” 40-0524 Stock
35-8031 ³⁄₈” Oil 35-0181 — ⁵⁄₁₆” 40-9976 Side Hole for Extra Chain Oil
Hose Clamp 35-0183* — ⁵⁄₁₆”
Assortment set includes 35-0182 — ³⁄₈”
50 clamps: 20 of ¹⁄₂”, 15 *Note: Fits S&S Super “E” carburetor
of ⁵⁄₁₆” and 15 of ³⁄₈”, zinc fitting.
finish. VT No. 35-0472 40-0505 40-0506
Cadmium Plated Straps used on 1952-
67 clutch booster cable, 1965-71 FX, FL
models oil tank feed line hose and 1958-
Oil Line Fitting Kit includes four cadmi-
71 sidecar brake tube.
um plated fittings for use with stock lines
VT No. 2753-5
when an external oil filter is used. Fittings
will work with aluminum cover oil pump
only.
VT No. Fits
40-0505 1940-57 Rigid
40-0506 1958-64 Swingarm
Panhead 1963-65
40-0210
40-0179 12-1280 Replica Panhead Y Oil Line Kit for
use on stock 1963-65 heads or on
V-Twin Braided STD heads for outside oiling. Timing
Stainless Hose in cover must be drilled for oil feed to
bulk length and can be this line.
cut to length as need- VT No. Item/Finish
ed. Use econo-seal ends or hose clamps 40-0179* Steel, Chrome
to attach to fitting. Warning: Not for use Chrome Y Oil Line. Updated *Note: Has elbowed fittings
in brake systems. design allows even flow to both 40-0113 Chrome
VT No. Size Feet hands on external oil Panheads 40-0129 Tin Plate
40-0202 ¹⁄₄” 10 when installed on Shovelhead 40-0128 Elbow, brass
40-0200 ⁵⁄₁₆” 5 lower ends. 40-0260 Elbow, zinc
40-0606
40-0245 ⁵⁄₁₆” 25 VT No. 40-0606 12-1280 Rear Chain Oiler
40-0210 ³⁄₈” 10 40-1008 Fittings, zinc
40-0244 ³⁄₈” 25
743
Rocker Box Oiler 1966-84
40-0114 40-0127
40-0130
Chrome Oil Line Sets for rocker boxes which include fittings
and seals.
VT No. Years Model Finish
40-0114 1966-84 Shovelhead Chrome
40-0203 40-0127 1966-84 As Above Zinc
40-0130 1966-84 Stroker Chrome
40-9986 Fittings Set (4) For Above
40-1008 Fittings Set (4) Zinc
14-0147 63529-57 Seals only, 100 pack
14-0189 63529-57 Seals only, 50 pack
Shovelhead Chrome Rocker Box Lines
for 1966-84 Big Twin by SiftonTM. Feature
an updated fitting design for ease of instal-
lation.
VT No. Type
40-0180 Stock
40-0235 40-0130 Stroker Extended
Overhead Stainless Steel

Braided Rocker Arm Oil
Lines fits 1966-84.
VT No. 40-0241
Stainless Oil Line Kit includes one

10’ x ³⁄₈” braided hose, six chrome
40-0237 Installed
40-0237 econo-seal hose ends.
Rocker Box Line Kit includes “T”. Fits 1966-84 Shovelhead. VT No. 40-0418
VT No. Finish Size
40-0203 Chrome 3mm
40-0235 Brass 6mm
40-0237 Chrome 6mm Chrome Steel Braided Oil Line Set
Top End Oil Restrictor for Shovelhead Engines. without elbows fits 1968-80 Shovelhead
Special fitting that uses a #100 jet to control oil flow on 4-Speed models, with stock oil tank and
1966-84 Big Twins. Installs in engine case where the inner primary. VT No. 40-9995
top end oil line feeds. 40-9995
VT No. 40-0050
Compression Fitting and Hose Kit includes
40-5010 six reusable compression fittings with ¹⁄₈” NPT
threads for oil pumps and tanks, and ten feet
of ³⁄₈” stainless steel braided hose.
Russell Universal Pro System Oil Lines features a unique VT No. 40-0459
compression fit sealing system which ensures a positive seal
on ³⁄₈” barbed type oil pump or oil tank fittings. Lines are cov- Oil Line Fittings for ³⁄₈” stainless
ered with braided stainless steel wire which is crimped on the hoses, feature 1/8” NPT threads.
chrome ends. Sold each. Use with 40-0566 fitting. Sold as a pack of six fittings.
VT No. Length VT No. 40-0983
40-5010 8”
40-5017 15”
40-0566 Oil Pump/Tank Fitting.
VT No. 40-0566
744
40-9988 Installed
40-0010
Oil Gauge
11/2” Deluxe Liquid Filled Oil Gauge Kit.
Liquid filled face eliminates needle bounce
giving a constant reading. Gauge features
Nugget Oil Gauge Kit has original hex design to place oil weather resistant sealed lens with chrome rim & extra-heavy
gauge at rocker box level on 1966-84 Shovelheads. Sold as mechanism, stainless steel case. Includes chrome fittings for
kit with 60 lb. liquid filled gauge. Hex dome matches our rock- bolt-on installation.
er shaft end plugs late 7142-4, early 7143-4. VT No. Years
VT No. Item 40-0517 1941-69
40-9987 1957-70 Complete Kit 40-0516 1970-84
40-9988 1971-85 Complete Kit 40-0878 40-0589
40-0359 1957-70 Fitting only
40-0358 1971-85 Fitting only
40-0010 1971-85 Fitting Only Knuckle Nut Style
40-0500 60Ib Gauge only, liquid
Mini Oil Gauge Kit for 1971-84 Big Twins. Includes 1” oil pres-
B 40-0500 sure gauge and chrome rocker box fitting.
VT No. Item
CLASSIC
40-0878 Kit
40-0589 ¹⁄₈” NPT Gauge Only
Oil Gauge Fittings accept
A standard oil gauge with ¹⁄₈” NPT,
each.
VT No. Years
12-1414 12-1413 12-1414 1968-84
12-1413 1941-69
Sifton Big Twin Oil Pressure Gauge
Kit includes chrome fittings and oil
40-0569 40-0571 40-0385 filled 0-60lb gauge. Fits 1970-84.
Liquid Filled 1¹⁄₂” Oil Pressure Gauges feature weather VT No. 40-0572
40-0572
resistant sealed lens, stainless steel case, chrome rim and
extra heavy mechanism. Liquid filled face eliminates needle Chrome Oil Gauge Cover is machined of alloy,
bounce giving a constant reading. All gauges have ¹⁄₈” NPT with square hole in bottom.
male rear fitting. VT No. 40-0448
VT No. # Pounds Face Brand
Chrome Billet Clock Assembly fits ⁷⁄₈” or
40-9906 0-30 Black V-Twin
1” handlebars. VT No. 39-0785
40-0500 A 0-60 White AEE
40-0569 0-60 Silver Sifton
40-0571 0-60 Blue Sifton
1936 Oil Gauge
40-0382 B 0-60 Black Accel
40-0386 0-60 Black V-Twin VT No. Item
40-9907 B 0-100 Black Accel 40-0844 Complete
40-0385 0-100 Black V-Twin 40-0690 White Faceplate
Oil Cooler
40-0305
40-1516 40-1518
Sifton Oil Coolers feature multipass oil flow configuration, specially 40-0306
designed turbulators in each oil passage way, highly concentrated Sifton Oil Cooler replica style in black or chrome.
mini-louvered air fins. VT No. Finish
VT No. Finish Fits 40-0305 Black
40-1516 Black 1982-94 FXR, 1984-13 FLT, 1955-FL 40-0306 Chrome
40-1518 Chrome 1971-83 FX, 1984-17 FXST
Oil Cooler Brackets will mount
40-0305 and 40-0306 Sifton
Coolers on Big Twin 1955-84.
VT No. Item
31-0154 31-1253 31-0154 Bracket
31-1253 Kit
745
Oil Filter 40-0564
40-0090 40-1948 40-0095

40-0846
Oil Filter Canister Assembly replaces 63800-48 on 1948-64 40-0613
BT models and will accept replica brackets as listed with stock
steel oil line and fitting sets. Order brackets, lines and fittings
separately from this page. Features slip on hose fittings which
can be substituted with screw in fittings to accept metal lines.
VT No. Finish Top 40-0734
40-0095 Chrome Chrome
40-0090 Chrome Polished
40-0976 Chrome Black
40-1948 Polished “1948” Polished 31-1281
40-0982 Top Fitting
40-0873 Fitting Oil Filter Kits.
40-0712 VT No. Year
40-0715 1948-64 Canister Filter. 40-0564 1936-47
VT No. Type Includes oil filter assembly with polished top and
40-0712 Replica chrome canister body and zinc plated mount bracket.
40-0715 Metal Perforated 31-1256 1936-47
40-0976 1948-64 40-0976
15-0099 Seal (40-0715) 40-0846 1948-57
40-0613 1936-47
Oil Canister Rebuild includes small parts and gaskets for 40-0734 1958-64
rebuilding. 1940-47 Knucklehead Oil Filter and Bracket Kit. Order oil
VT No. Item lines and fittings separately.
15-0616 Small Parts Kit VT No. Item
40-0370 Oil Line Set, Cadmium 40-0505
40-0501 Center Stud Set 40-0107 Oil Line Set Chrome
12-0164 ¹⁄₄” Steel Ball 40-0505 Fitting Set
15-1378 As Above Molded Rubber 15-0616 40-0201 Finned Body
15-1160 Filter Gasket 31-1256 Bracket
15-0099 Gaskets 31-1281 Bracket, 1936-47
14-0529 Oil Line Seals, 10 pack C
40-0943 Complete Rebulid Kit with filter A B
Finned Oil Filter Canister. Original design by

George Smith, Sr. in the 1950’s at S&S Cycle
for external filter assemblies. Big Twin Chrome Oil Canister Mount Brackets.
VT No. 40-0201 VT No. # Year/Model Finish
31-4001 B 1950-57 Rigid Chrome
31-4002 A 1958-64 Swingarm Chrome
40-0505 40-0506 31-4003* C 1965-84 FX, FL Chrome
31-4004 B 1948-57 Rigid Zinc
31-4181 1958-64 Swingarm Zinc
31-1281 1936-47 Bracket
*Notes: Oil lines must be fabricated.
40-0107 40-0761
Oil Line Fitting Kit includes four cadmium plated fittings for
use with stock lines when an external oil filter is used. Fittings
will work with aluminum cover oil pump only.
VT No. Fits 40-0507
40-0505 1940-57 Rigid Oil Filter Canister Line Set is a two piece line with nuts for
40-0506 1958-64 Swingarm rigid and swingarm frames.
VT No. Item
40-0106 Chrome Swingarm Line Set
40-0371 Cadmium Swingarm Line Set
40-0107 Rigid Chrome Line Set
40-0370 Rigid Cadmium Line Set
40-0507 Nuts only, pair, cadmium
14-0529 Rubber Seal, 63529-50
746 40-0761 1948 Line
Early Style Oil
Filter features a
chrome spin on filter.
Oil Filter
FXST Style Oil
VT No. 40-0796 40-0100
Filter Kit features
bolt on mounting
behind shift plate.
Big Twin frames
with 1970-up
Shovel or Evo
engines. Can be
used as an easy
access auxiliary
unit in addition to
40-0709 filter in tank. Bracket is replica of 1984-99 FXST type replac-
ing 63802-84. Oil spigots are copper, brazed in a vacuum for
Filter sold separately 40-0316 lasting durability. Includes chrome filter and 6 feet of rubber
hose with clamps.
Generator Oil-Filter Adapter bolts in place of 2 brush gen- VT No. Item
erator or alternator generator Big Twin case conversions, use
CLASSIC
40-0709 filter. 40-0709 Chrome filter
VT No. Item Finish 40-0708 Black filter
40-0315 Adapter Alloy
40-0316 Adapter Chrome 40-0100
Pura-Flo Universal Clamp
on Oil Filter Kit includes
filter and hose.
VT No. Item
40-0850 Kit
40-0709 Filter
40-0093
40-0091
Oil Filter, Housing and Bracket Kit features 92-up style
location, to fit 70-84 Big Twins nose cone motors when using
an outside frame front pipe. Mounts under front motor mount.
VT No. Item
40-0091 Kit
40-0093 Housing
40-0098 40-0952
40-1257
Installed
Universal Oil Cooler-Filter Kit includes chrome spin on filter,
finned mount flange, with hose and clamps. Front Mount Filter Unit incorpo-
VT No. Item Finish rates filter and regulator mount for
40-0798
40-0098 Filter Kit Alloy 1975-99 Big Twins and 1986-99
40-0952 Filter Kit Chrome FXST-FLST models. Includes filter,
40-0709 Filter only Chrome chrome billet base and hose fittings.
40-1270 Nipple Raw VT No. Item
31-2131 1” Frame Clamps 40-1257 Complete Kit
40-0798 Kit with Filter
37-0966 Bolt Set
40-0748 Transmission Mount

Oil Filter fits 4 speed
models. Black brack-
et and chrome filter
40-0096 included.
40-0096
VT No. 40-0748
Pura-Flow Chrome Oil Filter Kit for 1936-99 Big Twins.
VT No. Fits
40-0096 Kit
40-0709 Replacement Filter 747
Spin On Filter 40-0836
Stock
Motor ShopTM Brand Filter Packs include 6 pc of individually
Spin-On Oil Filters replaces stock units. Perf-form or V-Twin
wrapped and numbered chrome filters with 3” outside diameter
brand. All filters listed are low restriction type.
Perf-form Hex VT No. OEM Finish Length and length as listed.
1982-84 FL-FX except FXST Chrome Black OEM Type Length
40-0363 40-0857 40-0711 63782-80T Chrome 2.5” 40-0198 40-0836 63782-80T 1982-84 FL-FX 2.5”
40-0379 — 40-0710 63810-80T Black 2.5” 40-0199 40-0838 63796-77T 1980-up 5 Speed 3.75”
1980-98 FLT, 1982-94 FXR, 1984-98 FXST
40-0378 40-0860 40-0708 63805-80T Black 3.75” Oil flows in
— 40-0872 40-0709 63796-77T Chrome 3.75” In around the
Out outer diame-
K&N Spin-on Oil Filters feature hex nut end for ter, through
easy removal and installation, improved pressure the filter
relief valve, anti-drain back valve and heavy duty media and out
40-1720 passing by
base plate.
the magnet. MagnetekTM Oil Filters
Chrome Black Fits Length
The magnet feature a magnetic ring in
40-1720 — 1982-84 FLH & FXE 2.5” captures parti- center tower to trap particles
40-1710 40-1711 1982-94 FXR, 1984-98 FXST 3.75” cles less than less than 10 microns which
10 microns
Oil Filter Wrench fits all spin-on filters ³⁄₈” which could could have escaped through
drive. Fits all models. have escaped the filter wall.
VT No. 16-0743 through the
filter wall.
Hex VT No. OEM Fits Length
16-0743 40-0865 40-0851 63782-80 1982-84 FX 2.5”
40-0864 40-0852 63796-77 1980-up 5-Speed ST 3.75”
2.5” Chrome OE Spin-on Oil
Filters feature a cured black resin
impregnated paper that will remove
foreign particles from oil. Replaces
63782-80, fits 1982-84 FLH.
VT No. 40-0753
Pre 1984 Oil Filter

Drop In Filter Unit includes spring, 40-0714
O-ring and one piece filter.
VT No. Item
40-0172 Filter 40-0125
14-0582 O-Ring
Oil Filter Elements replace 63839-53

for 1965-84 BT.
VT No. # Type Fits
40-0700 A Felt 12 pack Oil Filter Hardware for 1965-81 FL
40-0702 Felt Case of 50 Oil Filter Hardware for 1965-81 FL, 1971-81 FX models.
VT No # OEM Item U/M
40-0705 B As Above Metal 40-0714 Kit A-B-C-D-E-F-H Kit
B Perforated, Sold Each 40-9953 Complete Kit As Above with cup (G) Kit
A
Includes Seals 40-9954 G 63826-53 Cup Each
40-0700 B 63839-53 Filter Element 12
40-0122 E 63846-67 Lower Retainer Each
13-0207 D 63831-67 Spring 10
Perf-Form Filter Unit is a complete 40-0125 A&C 63881-67 Upper Seal Kit Kit
drop-in replacement. 1965-81 FX-FL. 63882-67 Lower Seal
14-0526 F 63879-53 O-Ring 10
Spring included. 12-0940 H 63878-53 Clip 10
VT No. 40-0380 40-9955 I 63885-65 Dipstick Each
40-0504 J 62610-52A Chrome Cap Assembly Each
748
Outer Primary Cover
A B C
Floorboard Tab
for 1970-84 FLH D
models
CLASSIC
43-0339
43-0348
Big Twin Outer Primary Covers are from new die cast tooling to replace stock parts. Kits include chrome primary cover,
chrome allen screws, outer cover starter bearing and gaskets for derby, inspection and outer cover. All other covers are
sold as cover only. Part number for screw kit given for reference only.
# VT No. OEM Finish Fits/Type Chrome Allen
Screw Kit
4 Speed Chain Drive
43-0201* 60508-70 Chrome 1970-84 FLH, with tab and chain final drive 8762-17
43-0458 60508-70 Chrome 1970-84 FLH with tab 8762-17
43-0231* Kit Chrome As Above
A 43-0208 60508-70 Polished 1970-84 FLH, with tab 8762-17
43-0262* 60508-70 Polished 1970-84 FLH, with tab 8762-17
43-0354* Kit Polished 1970-84 FLH with tab
43-0200* 60547-77 Chrome 1970-82 FXE, 8 hole with chain final drive 8762-17
B 43-0256
43-0230* Kit
60547-77 Chrome
Chrome
1970-82 FXE, 9 hole with chain final drive
As Above
8762-17
C 43-0169* — Chrome 1970-84 FX with milled slots for venting on belt drive models, 8 holes. 8762-17
E 43-0331 — Chrome 1970-84 FX with milled slots for venting on belt drive models, 9 hole 8762-17
4 Speed Rear Belt Drive
43-0140 60525-82 Chrome 1982-85 FLH, 9 hole 8762-17
A 43-0349 Kit Chrome 1982-85 FLH, 9 hole with belt final drive
43-0243 60525-82 Chrome 1982-85 FLH, Note: Partially drilled 9th hole 8762-17
B 43-0348 60531-83B Chrome 1983-85 FX, 9 hole 9959-38
43-0217 Kit Chrome 1982-85 FXB 9 hole with belt final drive 9959-38
43-0242* 60498 Chrome 1980-82 FX, 8 hole 8762-17
5 Speed FXR-FLT
D 43-0204 60605-79 Chrome 1982-84 FXR, 1980-84 FLT 8763-20
43-0339 Kit Chrome 1982-84 FXR, 1980-84 FLT
*Note: Partially drilled 9 hole
Outer Primary
42-0617 42-0612 43-0046 Cover Kit includes
polished or chrome
outer primary cover,
chrome derby cover,
chrome inspection
cover, starter shaft
Steel Inner Primary Covers to fit 1970-84 without electric start. extension, gaskets
VT No. Type and screws. Fits
42-0617 Inner 1965-69 FL.
42-0612 Outer VT No. Finish
43-0045 Polished
43-0046 Chrome
749
Chrome Customizer
43-0506
V-TwinTM Chrome Customizer Kits include chrome parts and hardware for installation as pictured. Kits require removal of
engine to install rocker box covers. All kits for electric start models unless noted as kick and electric.
Smooth derby and inspection covers are included on FXST kits. Inspection cover on FXR, FXE, FLT and FLH applications must
be purchased separately. *Note: Does not include gasket. 1980-84 kits do not include trans top cover.
VT No. Year Model
Shovelhead 4-Speed Chain Drive Models 15-0621 15-0670
43-0506* 1970-84 FLH, Kick and Electric
43-0564* 1970-84 FLH, Kick and Electric, Polished
43-0507* 1970-84 FXE, Kick and Electric
Shovelhead 4-Speed Belt Drive Models
43-0510* 1982-85 FLH, Kick and Electric
Shovelhead 5-Speed Belt Drive Models
43-0508* 1979-82 FLT, Chain
1980-84 FLT, Belt
1981-84 FXR, Belt 15-0623
15-0888
GB Primary Cover Gasket Kit contains all the necessary gas-

kets and hardware when making inner primary repairs, primary
chain, clutch hub, clutch or left side transmission repairs. One
part number covers all necessary parts.
VT No. Fits Speed
15-0621 1965-E82 FL-FX 4
15-0670 L1982-84 FL-FX 4
GB Primary Cover Gasket Kit contains all the necessary 15-0623 1980-84 FLT-FXR 5
gaskets and hardware when making inner primary repairs, pri- James Primary Kits
mary chain, clutch hub, clutch or left side transmission repairs. 15-0866 include beaded outer gas-
One part number covers all necessary parts. Fits 1965-88 4-5 ket.
Speed FXST. VT No. 15-0888 VT No. Year Model
15-0865 1965-84 FX-FL
No Seals
15-0866 1965-84 FX-FL
15-1335 As Above with
Foamet®
15-0869 1980-84 FXR-FLT
750
Inner Primary Cover 1965-84
42-0314
Chrome Inner
Chrome Inner
Primary Trim Primary Trim easily 43-0384
adapts to stock cast
inner primary without
complicated disas-
sembly. Fits 1970-84
FX-FL.
VT No. 42-0314
CLASSIC
Inner
Primary
43-0492
Assembled
with all
compo-
nents
pictured!
43-0352
1970-85 FX and 1970-84 FL Complete Inner Primary

Housing Assembly for 4 Speed models includes die cast inner 43-0492 Installed
cover in chrome or polished finish, bearing, seal, chain ten-
FXE-FLH Cast Inner Primary Cover for 4-Speed models.
sioner, detent plate, vent tube, chain oiler tube, and drain plug.
VT No. Year/Model
Assembled. Note: Use starter 43-9122 housing for Hitachi and
43-0384 1971-84 FXE
43-9123 for Prestolite applications. Natural finish.
43-0492 1970-84 FLH
VT No. Year/Model
43-0352 1970-85 FX
43-0353 1970-84 FLH 43-0202 FXE
43-0988
With Shift Shaft Hole 43-0146
Inner Primary is cast construction with natural finish as stock Without Shift Shaft Hole
replaces 60617-65A. Order mounting hardware & bearing sep-
arately. Fits 1965-69 Big Twin.
VT No. Item
43-0988 Replica Inner
17-0510 Inner Bearing
43-0195 43-0147 FL Type

43-0675
FX-FLH 4 Speed Cast Inner Primary Cover available with or
without bearing installed.
Without With OEM Finish Fits
43-0202 43-0675 60441-82A Chrome 1970-84 FX-FXE
43-0195 60619-70 Polished 1970-84 FL-FLH
43-0147 43-0677 60619-70 Chrome 1970-84 FL-FLH
751
Inner Primary Bearing
17-0510
17-0511 Big
17-0991 12-0373 Twin
Starter
Block
18-1136 Primary Cover
(not included) Off Kit
17-0503 Big Twin Starter Block Off Kit for use on all 1965-84 4-Speed
12-0356 14-0104 12-0313 12-0340 Big Twin models. VT No. 18-1136
Aluminum Inner Primary
Mounting Kits contain all stock
type hardware for mounting alumi-
num inner chain housing on all Big
Inner Bearing and Seal Kit for Big Twin models. Twin.
VT No. OEM Fits VT No. Years
17-0510 9037 1965-69 4-Speed 8798-12 1965-69 Colony Lock Ring with Bolts
17-0511* 9040 1970-84 4-Speed 17-0942 As Above Lock Ring Only
17-0503* Dbl Seal 1970-84 4-Speed 37-8666 1970-79 Kit with Studs and Bolts
17-0991 Dbl Seal Inner Bearing and Sleeve, 1970-84 9868-26 As Above, Colony
12-0373 9040 1970-78 4-Speed without seal, thin 37-8667 1980-85
12-0356 9061 Late1979-Early 84 4-Speed 9869-24 As Above, Colony
14-0104 12018 1970-84 Seal, 5 pack 37-8803 1971-up Bolt with Wire Hole
*Note: Includes bearing seal 12-2113 1980-84 Stud Trans Ear
Bearings Only, Number of Shields Noted. 17-9222 1980-83 FLT-FXR, Lock Tab
12-0373 9040 1970-78 thin, no shield
12-0313 9061 1970-84 Sealed, 2 shields
12-0340 8975 1980-84 5-Speed FXR-FLT 19-0415
V-Twin Inner Primary O-Ring fits 1970-82. Primary Case Saver protects inner
Replaces 11125. case and starter housing area
VT No. 14-0511 which is damaged by drive chain.
Reinforced nylon.
Outer Primary Cover Needle Bearing presses in VT No. 19-0415
outer primary cover to secure end of starter shaft.
Fits 1965-88. Replaces OEM# 9063. 1970-up Big Twin Inner Primary Lock
VT No. Brand Tab. One piece design eliminates need for
12-0395 VT safety wire, 5 pack. VT No. 17-0937
12-0318
12-0318 Torrington
1970-85 GB Inner Primary Repair
Gasket Kit includes gasket to replace Chain Oiler Fitting replaces
O-Ring seal when the lip of the motor 60549-70 on FL-FX 1970-
is partially or entirely broken off. To 40-9976
84, attaches to inner primary
avoid machining & welding, grind the 40-0524 cover, each.
partially broken lip smooth and install VT No. Item
the gasket. Special lock and bolts 40-0524 Oiler
included. VT No. 15-0223 40-9976 Side hole for extra oil
Inner Primary O-Ring Saver Kit
for 1970-84 Big Twins. Replaces
stock type O-ring with a gasket.
Used for repairing damaged crank-
case O-ring sealing lip. Available
with a silicone beaded metal gas-
ket or a foam rubber coated gas-
ket. Includes lock tab.
VT No. Item Brand

15-1280 Metal Beaded James
15-1299 Metal Beaded GB 12-1519
15-1281 Metal Foam Rubber James Primary Baffle Plate replaces 60556-74 on all 1970-84
FX-FL. Helps keep oil out of clutch pack.
VT No. 12-1519
752
Chrome Derbys are 3 bolt type for 1970-98 Big Twins.
Order gaskets separately. Derby Cover
42-0605 42-1029 42-0102 42-0036 42-0616 42-9965 42-0578
42-0091 42-0558 42-0991 42-0747 42-0958 42-6070

42-0579
42-0107 42-9944 42-1086 42-1073 42-0470 42-0471 42-1087
CLASSIC
42-0632 42-1075 42-1150 42-7102 42-0108 42-0195 42-0194
42-0238 42-0239 42-2025 Primary Derby Gasket Kit used to replace gaskets and
seals after clutch and primary chain adjustment on Big
Twins, FLT, FXD or ST models. Fits 1970-98, 3-Hole.
VT No. 15-1506
VT No. Type 42-0958 Maltese 42-1142 Grooved, chrome 42-0194 Smooth, chrome
42-0605 Chrome Dome (Kit) 42-6070 Iron Cross 42-1150 Grooved, black 42-0238 C-Thru, chrome
42-1029 Chrome Dome 42-0107 Eagle Spirit 42-0195 Smooth, chrome 42-0239 C-Thru, black
42-0102 Finned 80” Polished 42-9944 Eagle Spirit 42-0194 Smooth, black 42-2025 Holey
42-0036 Chrome Button Allen 42-0632 Black Finned 42-0580 Big skull 42-0267 Chrome Skull
42-0616 Chrome Ventilated 42-1073 Lady 42-1380 Air Flow, black 42-0268 Black Skull
42-9965 Early Style Bird 42-1075 Flame 42-1379 Air Flow, chrome
42-0578 Bonehead 42-0470 Flame 42-1150 Grooved, black
42-0579 Cross 42-0471 Flame, black 42-7102 Smooth, ring
42-0091 Skull 42-1087 Contour, chrome 42-0108 3-D spinner
42-0991 Red Baron 42-1118 Contour, black 42-1086 Ball Milled
42-0747 Flame 42-1090 Perforated, chrome 42-0195 Smooth, black
Screws
Acorn Chrome Screw Kits for Big Twin primary 9308-17 Stock Primary Cover Screws are plated
covers. original type fasteners to mount outer alu-
Acorn Allen Year Speed minum primary and inspection covers on
7350-15 8762-17 1970-84 FX-FL 4 Big Twin 4-Spd.
Allen 1984-85 FXST 5 Chrome Cadmium Zinc Fits
8481-20 8763-20 1980-84 All 5 8799-12 8800-12 37-0030 1965-69
9307-17 9308-17 1970-80
753
Inspection Cover
Chrome Flame Derby and
Inspection Oval Set. Screws
included. Fits 1965-98 FL and
Softail.
42-0603 42-0826 VT No. 42-0817
42-0817 Installed
42-0601 42-0602 42-1226 42-1225
42-0630 42-0600
Chrome Ventilated Oval and Derby Kit for 1970-98 primary

42-0610 covers.
VT No. Style
42-0749
42-1226 V-Twin Vented
42-1225 Billet Vented
42-1008 42-0476 42-0035 42-0040
42-0477 42-0188
42-0036 42-0002
42-0187
V-Tech Covers feature allen screw styling in deluxe chrome

die cast metal.
VT No. Item
Inspection Ovals for 1965-up Big Twin alloy primary covers. 42-0036 Derby
VT No. OEM Type 42-0035 Points
42-0603 60513-71 1971-73 FX with hole 42-0002 Oval
42-0601 60572-78 1965-84 FLH 42-0040 Oval with shift, FXE hole
42-0630 60574-65 FX-FL with Peg Stud Chrome Shifter Lever Cover replaces 60400-74.
42-0602 60579-74 1974-82 FX with bushing Use on all 1974-up all FX models except FXWG and
42-0324 Bushing Cover
FXR.
42-0600 Die cast Finned
VT No. Item
42-0610 Billet
42-0826 Flywheel 42-0324 Cover
42-0749 Flame 42-0324 10-0743 Bushing
42-1008 Bonehead 42-0604 42-0629
42-0476 Flame
42-0477 Black Flame
42-0188 Chrome
42-0187 Black
42-1216 Skull
42-0049
Chrome 5-Speed Inspection Covers are available with or
42-0747 Flame Covers. without shifter hole.
VT No. Item Without Shift Hole Bushing Years/Model
42-0747 Derby, 3-Hole 42-0604 32519-80 10-0769 1982-84 FXR-FLT
42-0748 Points Cover With Shift Hole
42-0629 60642-82 10-0769 1982-E84 FXR
42-1180 Aluminum Alloy
42-0049 — 10-2488 1985-94 FLT
Primary Derby Gasket Kit used
to replace gaskets and seals after
clutch and primary chain adjustment
on Big Twins.
VT No. Derby Year Holes
15-1506 15-1507 15-0562 1999-up 5-Hole
15-1506 15-0563 1970-98 3-Hole
754
Outer Primary Cover 1936-64
42-0880 V-TwinTM Replica
Outer Primary
Covers for 1936-
54 Big Twins are
produced with
42-3754 new tooling for
accurate fit and
shape.
42-0881
42-4154
CLASSIC
37-8349
15-0417
V-TwinTM Replica Outer Primary Cover for 1955-64 Big
Twins, order plug separately. 42-3640
VT No. Finish Item VT No. Finish Year
42-0880 Black Cover 42-3754 Black 1941-54
42-0881 Chrome Cover 42-4154 Chrome 1941-54
42-0385 Chrome Cover Kit 42-0372 Black 1941-54 Kit
37-8349 Plugs 42-3640 Black 1936-40
14-0542 O-Ring 42-0385 42-0627 42-0875
A 42-0873 A
15-0417 Primary Gasket and Plug Kit A
1936-64 Big Twin Inner Primary Cover Screw Kits include
screws for outer cover, derby and inspection cover.
VT No. Finish Type
7414-20 Chrome Acorn
8756-30 Chrome Allen
8155-30 Chrome Screw Stock
8156-30 Cadmium Screw Stock B C
9724-30 Parkerized Screw Stock
42-0595
42-0642
42-0614 42-0628
42-0611 Derby Covers for tin outer primary.

VT No. # Type/Finish
42-0612 42-0594 42-0627 A Dimple/Chrome
42-0642 A Dimple/Black
42-0870 A Dimple/Replica Black
42-0873 A Dimple/Chrome 42-0870
42-0875 A Dimple/Replica SS
42-0614 B Chrome
42-0628 C Bird/Chrome
42-1577 World’s Fair
42-1577
Black Derby Cover Kit includes replica
42-0391 steel derby inspection cover, parkerized
Chrome Steel Outer Primary Cover for Big Twins. Early screw kit and cork gaskets. Kit features a
type is shallow in sprocket area. Compensator type is deeper black finish. VT No 42-0048
for sprocket clearance.
VT No. Type Years Finish Chrome Inspection
42-0611 Early 1936-54 Chrome Covers for Big Twin.
42-0595 Early 1936-54 Black 42-0659 42-0626 42-0876
42-0612 Comp 1955-64 Chrome VT No. Type VT No. Type
42-0594 Comp 1955-64 Black 42-0871 Black, Replica 42-0659 Flat
42-0391 SS 1936-64 Kit 42-0874 Chrome, Replica 42-0626 Dimpled
42-0876 Stainless, Replica 42-0641 Black
755
Inner Primary Cover 1936-64
42-3654 42-3654 1936-54 1955-64 Inner Primary Mounting
Kits contain all hardware to
mount tin inner primary to
engine on Big Twins.
VT No. Years Finish
3073-16 1936-44 Parkerized
3045-14 1945-54 Parkerized
Oil 7811-14 1941-54 Steel
42-0646 7812-12 1955-64 Steel
Guard
9601-10 2071-10 Inner Primary Mount Kit
Detail
includes hardware to mount
inner to oil tank and frame.
VT No. Finish
9601-10 Parkerized
42-0643 42-0645 2071-10 Chrome
40-9983
40-9984
Inner Primary Cover Drain Tube for sheet metal early Big Twin
42-1212 primary. Tube with nut.
VT No. OEM Year/Type
42-0862 40-9983 60546-36 1937-58 Rigid
40-9984 60546-59 1959-64 SAF
42-1213 42-1214 40-0835 Fitting
1954-64 Rear Chain Oiler Kit replaces
63591-62 to fit on rear of inner primary
cover includes screw.
VT No. Item
Replica Inner Primary Covers with drain fitting installed. 42-0653
42-0699 includes sprocket oil guard. Oil guard may have to be 42-0653 Rear Chain Oiler
removed on some foot shift applications. 40-9983 Oil Drain 1936-57
Black Chrome Raw OEM Year 40-9984 Oil Drain 1958-64
42-3654 — 42-1212 60626-36 1936-54 42-0589 Oil Guard
— 42-0643 — 60626-36 1936-54 Chain Oil Kit. Cad plated oiler body,
42-0646 42-0645 42-1213 60620-55 1955-57 63607-54, oiler adjusting screw, 63610-53,
— 42-0862 — 60620-58B 1958-64
nut and brass washer used on 1954-62
— — 42-1214 60620-58 1958-64
Panheads.
42-0621 42-0619 42-0622 VT No. 2321-4
15-0642
42-0620 42-0617
15-0408
42-0623
Primary Gasket Kit includes
3 cork gaskets for 1936-64
Big Twin outer primary covers,
42-1872 includes 60540-36, 60567-36 and
60565-36.
Steel Inner Primary Covers for 1936-54 has small hole at motor Cork Primary Cover Gaskets for 1936-64 Big Twin.
end, 1955-69 has large hole for splined sprocket shaft. The James GB OEM Item
42-0623 is slightly deeper to mount to 1965-69 engine cases.
15-0905 — 60540-36 Primary
Chrome Black Years Note
42-0621 42-0619 1936-54 15-0919 15-0177 60565-36 Clutch Cover
42-0622 42-0620 1955-64 Slotted Hole for Chain Guard Mount 15-0920 15-0178 60567-36 Inspection
42-1186 1955-64 Single Hole for Chain Guard Mount 15-0180 15-0408 60629-55 Inner Primary, 1955-64
42-0623 1965-69 15-0844 15-0642 — Kit Complete, 1936-54
42-0617*42-1218 1970-84 Alternator type — 15-0417 — Kit Complete, 1936-64
Bracket Reinforcement Ring fits inner
49-1152 1936-57 Lower and Upper primary.
49-1153 1958-64 Upper VT No. Year
42-1872 Tab Kit 42-0618 1936-54
*Note: Allows use of 1955-64 type compensator outer covers on 49-0759 1955-64
alternator, electric start must be sacrificed. 42-0618 49-0759
756
45-0673
Spoke Set Chart
Flat Flanged Hubs. Front and rear hubs (45-0317, 45-0670, 45-0330, 45-0306 with horizontal flanges) including 1936-84 FL-FLH
front and rear, 1973-84 FX-FXE rear, 1954-99 XL Rear, 1984-95 FLST-FXST-FXDWG front or rear, 1996-up FLST-FXST alloy rear,
1986-up FLT rear, 2000-up XL alloy rear and 1996-up Dynaglide alloy rear. All Spokes Listed Are 6-8 Gauge with short shank.
Spoke Sets for Flat Flange Hubs
Chrome Chrome Perma Chrome Chrome Stainless Stainless Chrome Chrome Size Rim
V-Twin Buchanan Chrome Twirled Twirled Twirled Twirled Diamond Diamond Note
V-Twin Buchanan V-Twin Buchanan V-Twin Buchanan Type*
45-0620 15” DC
45-0621 45-0720 45-0632 45-0703 45-0675 45-0709 45-0682 16” DC 3
45-0762 45-0765 17” DC 4
45-0601 45-0721 18” C
45-0610
CLASSIC
18” DC
45-0602 45-0727 45-0729 19” C
45-0767 45-0728 19” DC 1
45-0603 45-0633 45-0706 45-0677 45-0726 45-0716 45-0684 21” DC/C
Spoke Sets for Flat Flangef Hubs
45-0409 Chrome Stainless Stainless Cadmium Rim Rim Note
Rippled V-Twin Buchanan Plated Size Type*
Buchanan V-Twin
45-0731 45-0409** 45-0651 45-0710 16” DC 3
45-0748** 45-0652 45-0798 18” C
45-0955 45-0656 18” DC
45-0764 45-0653 19” C
45-0764 45-0654 19” DC 1
45-0768 45-0674 19” DC 2
45-0713 45-0655 21” DC/C
Notes:
1. Fits Disc Type Spool Hub Only
2. Fits Drum Type Spool Hub Only (Cross 3)
3. VT No.45-0409 is Hand Polished
4. Use with rim 52-0435
5. Fits1995-up FXD-XL Applications.
*Note: Rim Type Drop Center = DC or Conventional = C
**Note: Polished Stainless Steel Spokes.
Twirled-Diamond-Stock
are noted as the following:
B Twirled Buchanan
B Twirled v-Twin
A Diamond Buchanan
C Ripple Style All Spokes Listed Are 6-8 Gauge
Spoke Sets for Alloy Front Disc Spools
Perma Cadmium Chrome Chrome Chrome Stainless Chrome Chrome Stainless Stainless Size Rim
Chrome V-Twin V-Twin Twirled Twirled Twirled Diamond Rippled V-Twin Buchanan Type
V-Twin Buchanan Buchanan Buchanan Buchanan
45-0606 19” C
45-0631 45-0155 45-0623 45-0705 45-0676 45-0699 45-0683 45-0714 45-0660 19” DC
45-0751 45-0606 45-0701 45-0687 45-0755 45-0662 21” DC/C
45-0611 45-0612** 21” DC/C
Note: 5
6/8 Gauge Nipple 40 Piece Set.
45-0626
VT No. Type
45-0160 Standard, Cadmium
45-0680 Standard, Stainless
45-0782 Extended, Stainless
757
1936-66 Replica Wheels
52-0100 52-0796
52-0800 52-0876
1936-66 Big Twin Star Hub Type Wheel includes chrome
hub, chrome rim and choice of chrome or stainless spokes. 52-1252 52-1255
Fits front or rear and hub and is assembled like stock with
loose type roller bearings. All wheels include rubber rim strip
installed.
Chrome Stainless Diameter Width
52-0100 52-0800* 16” F & R 3.00”
52-0876 52-0877* 18” F & R 2.15”
52-0831 52-0832 16” Rear 4.00” 52-1253
52-0115 — 18” Rear 4.25”
Replica Wheel Assemblies include the black “step” style hub.
52-0102 — 19” Front 1.85”
VT No. Rim Spoke Size
— 52-0801 19” Front 2.15” (Drop Center)
52-1253 Black Cad 16”
52-0103 52-0802* 21” Front 2.15”
52-2047 Chrome Cad 16”
52-0487 — 21” 3.25”
52-2050* Black SS 16”
52-0796** — 16” 3.00”, Timken
52-1271 Black Cad 18”
52-0797** — 21” 3.00”, Timken
52-1252 Black SS 18”
*Note: Polished Stainless Steel Spokes. **Note: Wheel has
52-1255 Black SS 18”
3/4” Timken bearing type hub. Requires installer to be fabricate
*Note: Polished Stainless Steel Spokes
correct axle, axle sleeve and spacer.
All Wheels that include V-Twin’s Replica Star Hub will accept original type axles and sleeves.
52-2046
52-0847 52-0866 52-0880 52-0881 52-0644
1936-66 Big Twin Star Hub Type

Wheel includes black hub with choice of
chrome replica rim and chrome spokes
or black replica rim and stainless steel
spokes. All wheels include rubber rim
strip installed. *Note: With polished
stainless steel spokes.
52-0886 52-0887 52-0889

Chrome Rim Chrome Black Rim Diameter Spoke Width
Stainless Spokes Spokes & Rim Stainless Spokes
52-2046 — — 16” Zinc Spokes 3.00”
— 52-0847 52-0866* 16” 3.00”
52-0880* — — 16” 3.00”
— — 52-1275** 16” **Note: Cad Spokes/Black Hub 3.00”
— — 52-0881 18” 2.15”
— — 52-0644 18” Cadmium 2.15”
52-0886* — — 18” 2.15”
— 52-0887 52-0889 19” 2.15”
52-0590 — — 19” Stainless Steel/Black Hub 2.50”
758
Front Wheel Assembly 35 & 41 mm Fork Chrome Stainless Rim Rim
52-0155 Spokes Spokes Diameter Width
All front wheels on this page fea-
ture a chrome hub, unless noted
Chr. Hub Chr. Hub as satin, with all internal bearings
1973 Only XL w/single disc. Fits 35mm forks. installed, choice of chrome or
stainless spokes and chrome rim
52-0158 — 19” Drop Center 2.50” completely laced and trued.
52-0174 — 21” 1.85”
1974-77 XL Clover Type with single disc. Fits 35mm forks.
52-0165 — 19” Drop Center 2.50”
52-0161 — 21” 1.85”
1978-83 XL with dual disc. Fits 35mm forks.
52-0155 52-0818** 19” Drop Center 2.50”
52-0165 52-0151 52-0819** 21” 2.15”
1980-83 FXWG with dual disc. 5/16” rotor mount holes. Fits 41mm
forks.
52-0151 52-0131 52-0131 52-0132** 16” 3.00”
52-0821 52-0822 19” 1.85”
52-0128 52-0820 19” Drop Center 2.50”
52-0127 52-0181 21” 2.15”
52-0490 — 21” 3.25”
1973-84 FL with 3/8” disc mount holes Wheel Builders
CLASSIC
52-0129 52-0179 16” 3.00”
52-0863* 52-0864*/** 16” Deluxe 3.00”
52-0814 52-0812 19” 2.50”
52-0815 52-0813 21” 1.85
52-1026 — 23” 3.00
Since 1969
*Note: Deluxe rims are OE style
**Note: Polished Stainless Steel Spokes.
Wheel Rim
52-0230 52-0222 52-0229
52-0692
52-0230
52-0226
52-1208
52-0700 52-0691
52-1291
52-0435
Drop Center Chrome Rims features drop center design for bead and 40 spoke holes. All are chrome unless noted. Note:
Large hole accepts rubber valve stem tube. Small hole accept metal stem tubes.
16” Rim w/Large Side Valve Stem Hole 17” Rim with Small Center Hole
VT No. Width Brand 52-0435 4.5”
52-0226 3.0” Perma Chrome 52-0896 6.0”
52-0699 3.0” As Above Raw 18” Rim with Small Center Hole
52-0692 3.0” Black Gloss 52-0229 4.5”
52-0433 3.0” Black Police 16” x 3.00” Police Rims.
52-0223 4.0” V-Twin Chrome Black
52-0303 4.0” Replica 52-0379 52-0376
52-0381 4.0” VT 19”
16” Rim w/Small Side Valve Stem Hole 52-0700 2.50” Perma Chrome, 43018-73
52-0230 3.0” Center Valve 52-0977 2.50” V-Twin, 43002-70
52-0222 3.0” Perma Chrome 52-1208 2.15” Black
52-0691 3.5” Perma Chrome 52-1214 3.00” Black
52-0228 4.5” Perma Chrome 52-1041 3.00” Chrome
18” Rim with Small Center Hole 21”
52-0707 2.5” V-Twin 52-1208 2.15” Black
52-0229 4.25” Perma/Chrome 23”
52-1291 3.00” Chrome
759
Big Twin Rear Wheel 18 x 4.25” Rear Wheel
includes chrome steel hub
and spokes. Accepts 150
thru 180 series tires. Fits
Complete Wheel Assembly 1973-84 FX-FL.
features the following: VT No. 52-0776
• Chrome Rim
• Chrome or Stainless Spokes
• Chrome Hub with Internals
• 40 Spoke Style.
**Note: Polished Stainless Steel
52-2034 Spokes Wheels with Twirled Spokes
52-0841 Twirled Spoke Detail

52-0809 52-0937
1973-82 FX-FXE Rear, 1973-84 FL-FLH Front or rear, ³⁄₈” disc
Mount Holes with internals.
52-0129 52-0179 16” 3.00”
52-0863* 52-0864*/** 16” Deluxe 3.00”
52-0126 52-1094** 16” 3.50”
52-0937 52-0938 16” 4.00”
52-2043 — 16” 4.50”
52-2034 — 17” 4.50”
52-0776 — 18” 4.50”
1982-84 FXE, 1982-86 FXWG, 1982-85 FXR,1984-85 FXST
52-0168 52-0809** 16” 3.00” 52-0844 52-0860
*Note: Deluxe rims are OE style
Wheels with Twirled Spokes include chrome hubs with inter-
Chrome Wheel Assembly fea- nals, rim and twirled chrome spokes assembled.
tures 3.00” x 16” profile “Smoothie” VT No. Fits Type Width
rim for 1973-84 front or rear FLH. FRONT
VT No. 52-0546 52-0844 1980-83 FXWG 21” Dual 2.15”
52-0860 1974-77 XL-FX 19” Single 2.50”
52-0944 1977-83 XL-FX 21” Dual/Single 2.15”
REAR
52-0841 1973-82 FXE-FLH 16” Rear & Front 3.00”
1973-82 FLH
52-0428 Chrome 16” x 3.0” Wheel 52-0850 1973-82 FXE-FLH 16” 4.00”
Assembly fits 1973-84 Big Twin 52-0177 1982-85 XL 16” 3.00”
FX-FL. Laced and trued with bear- 1982-84 FXE
ings installed and includes drilled 1982-86 FXWG
steel rotor and chrome 51 tooth 1984-85 FXR
sprocket. Chrome bolts are sup- 52-0865 1954-78 XL 16” 3.00”
plied for each side. 52-0883 1979-81 XL 16” 3.00”
VT No. Disc
52-0428 10”
52-0429 111/2”
1967-72 Wheels
1967-72 Big Twin Wheel Assembly fits front or rear includes Internal Bearing &
lock, screw, seal spacer, tube spacer and a bearing. Hardware Kit for 1967-
Chrome Stainless Note: 1967-72 72 front and rear hubs.
Spokes Spokes Width Diameter type Hub utilizes 1
All parts necessary to
52-0146* 52-0745* 3.00” 16” Front or Rear bearing in Hub and
— 52-1039** 3.00” 16” Front/Rear must be supported build or rebuild a bare
52-0106 52-0803 3.00” 16” Front or Rear on the other side hub. Includes 3 bearings,
by a brake drum or tube spacer, seal, seal
— 52-0124 2.50” 19” Front our adapter VT No.
52-0123 52-0806 2.15” 21” Front 45-0314. Front drum sleeve & hub lock (Left
52-0106 *Note: Assembled with black finish hub. uses 1 bearing, rear Hand Thread). Complete.
**Note: Black Rim and Hub drum sprocket, 2 VT No. 44-0410
760 bearings.
Wheel Rim See page 471 for
Complete Rim Listings. Spoke
Inside Bead
Width 2.20”
52-0945
(A) 1936- (B) 45” Solo (C) 1952-63

52-0768
up Big Front Hub 1938- K and XL ¹⁄₂ 45-0409
Twin, Side 52. Sets include Drum Front *Note:
Valve, 20 short and 20 Hub Polished
OHV long spokes. Stainless
Order spokes by hub style as shown. Steel Spokes.
52-1016 52-0785
45-0710 45-0757
CLASSIC
1936-up Big Twin, Side Valve, Overhead Valve (A)
Steel Wheel Rims feature OEM style bead construction. Note: VT No. Finish Size Rim
45-0710 Cadmium 16” Drop Center
Spoke nipple holes may require enlarging before assembly 45-0757 Zinc 16” Drop Center
with aftermarket spoke sets. 45-0651 Stainless Steel 16” Drop Center
VT No. OEM Fits Finish Size Model 45-0409* Stainless Steel 16” Drop Center
52-0947 43004-35 F & R Black 18” Big Twin 49-0819 Zinc 16”
52-0768 Powder F & R Black 18” Big Twin 45-0720 Chrome 16” Drop Center
45-0621 Chrome, V-Twin 16” Drop Center
52-1018 43005-35 F & R Chrome 18” Big Twin 45-0743 Parkerized 18”
45-0744 Cadmium 18”
52-1040 Black F & R Black 18” VL 45-0652 Stainless Steel 18”
52-1016 Powder F & R Black 19” VL 45-0748* Stainless Steel, V-Twin 18”
52-0962 — F & R Chrome 19” 45-0763 Nickel 18”
45-0820 Zinc 18”
52-0963* — F & R Black 18” 45-0721 Chrome 18”
52-0964* — F & R Chrome 18” 45-0601 Chrome, V-Twin 18”
52-0025 — F & R Alloy 18” 45-0653 Stainless Steel 19”
52-0232 Black Powder 18” X 2.15” 45-0602 Chrome V-Twin 19” Conventional
52-0026 — Alloy 19” WR 45-0160 Cadmium Nipple Set
1938-53 45” Solo Front (B)
52-0027 Alloy F & R 18” WR
Finish Size Rim
52-1034 — Black 19”
52-0969 — F Chrome 19” 1952-63 45-06641 Stainless 18” Conventional
52-0965 43002-64 F Chrome 19” 1964-72 45-0783 Stainless 18” OE
52-0967 — F Black 16” 45 Solo 45-0697 Stainless 18” OE Style
52-0966 — F Chrome 16” 45 Solo 45-0752* Stainless 16” Drop Center, OE Style
52-0762 — F Black 18” Indian 45-0877* Stainless Steel, Replica 16” Drop Center, OE Style
52-0433 Replica F & R Chrome 16” Police 45-0922 Stainless Nipple Set, 40 pcs, 1936-52
52-0434 Replica F & R Black 16” Police 1952-63 XL-K Front (C)
*Note: Features reverse roll and deep dish spoke area to fit VT No. Finish Size Rim
models with integral ¹⁄₂ brake drum. 45-0708 Stainless 18” Conventional
Note: 45 Solo Replica Front Rims VT No. 52-0966, 52-0967, Note 1: Cross One Pattern on Brake Drum Side
and 52-0996 require OE style rim spokes.
45-0985 Spokes for 1930-36 VL Front and Rear.

52-0208 For OE Style Rim.
52-0763 Chrome Nickel Size
52-1208
45-0735 45-0818 18”
45-0736 45-0820 19”
45-0985 Hub, Nickel Plated
Conventional Rims are flat style. 40 holes.
Chrome Black Size Width
52-0208 52-0785 18” 2.15” Chrome Spoke and Rim Set includes chrome
52-0202 — 19” 1.85” WM Type Rim rim with 40 chrome 6-8 gauge spoke and nipple
52-1057 52-1016 19” 2.15” WM1 = 1.6” set. Fits 1936-up Big Twin, 16” x 3.0”.
52-1043 52-1041 19” 2.50” WM2 = 1.85”
52-0748 52-1208 21” 2.15” VT No. 52-0300
WM3 = 2.15”
52-0203 52-0763 21” 1.85”
52-1291 — 23” 3.00”
761
Front And Rear Wheel Hub
All Hubs include
45-0670 45-0312 45-0294 bearings, races, seals,
seal spacers and are
assembled and chromed
except where noted.
45-0317 45-0303 45-0297

Front Hubs
VT No. OEM Fits
45-0317 43540-73 1973-84 FLH-80
³⁄₈” Disc Mount Hole
45-0297 43600-73 1973 only FX
45-0307 43600-74 1974-77 FX, Single Disc
45-0307 45-0310 45-0311 45-0310 43600-78 1978-83 FX-FXE- FXEF-
Rear Hubs FXEF-80-FXE-80
VT No. OEM Fits 1982-83 FXR-FXRS Dual Disc
45-0317 43540-73A 1973-E82 FX-FL-FXE 45-0311* — As above, Satin
³⁄₈” and ⁷⁄₁₆” Holes 45-0294 43663-80A 1980-83 FXWG Dual Disc
45-0303 1973-82 ⁵⁄₁₆” Disc Bolt Holes
without bearing set *Note: Internals not included, order separately
45-0670 40952-82A 1982-85 FXE-FXWG-FXR, 84-85 FXST
Hub Internal
Hub Rebuild
12-0922 44-0501 1973-83 Hub Hardware.
VT No. OEM Item
12-0922 11027 Snap Ring 44-0311
44-0501 43559-73 Washer Inner Hub Bearing Tube Spacers may be used in some cast
mag wheel applications, when flange is removed. Check for
FLT Wheel Hub Hardware fit 1982-99 mod- proper length fit.
els, 1982-99 FXR models. VT No. OEM Model/Year Front/Rear
VT No. OEM Item 44-0309 43549-36 1935-66 Big Twin Front and Rear
44-2024 43613-92 2.424” Spacer for narrow hub 44-0310 43549-67 1967-72 Big Twin Front and Rear
44-2025 43608-82 4.308” Spacer for wide hub 1971-72 FX Rear
44-2026 43650-82 Spacer Washer 44-0315 41185-63 1963-78 XL Rear
44-2027 43290-82 .032” Shims, 10 pack Steel Dual Flange Hub Spacer, Front & Rear
44-2028 43291-82 .016” Shim 44-0338* 43601-78 4.420” Orange
44-2029 43292-82 .008” Shim 44-0336* 43602-78 4.434” Yellow
44-2030 43293-82 .004” Shim 44-0337* 43603-78 4.448” White
44-2031 43294-82 .002” Shim Cast Wheel Hub Spacer, Front & Rear
44-2032* 43604-78 4.420” Red
12-0922
44-2033* 43605-78 4.434” Yellow
44-2034* 43606-78 4.448” White
Front Laced
44-0237 43668-82 FLT-FLST-FXST-WG
Wheel Seals. Note: VT No.14-0139 and 14-0658 feature metal Aluminum Hub Spacer, Front
housing all others are rubber covered. 44-0311 43740-64 1954-72 XL 1971-72 FX
James VT No. OEM Fits 44-2035* 43635-74 2.148” Gold/Violet
14-0659 14-0140 47519-83A 83-99 FX, 85-99 FLST, 44-2036* 43633-74 2.162” Red/White
Front/Rear Wheel 44-2037* 43745-73 2.166”
Double Lip 44-0312* 43634-74 2.177” Green/Orange
— 14-0182 47519-83 1983-84 As Above 44-1981* 43625-78 2.536” Gold
14-0657 14-0138 47519-58 1973-82 FX Rear Wheel 44-1980* 43624-78 2.550” Pink
1973-82 FL Front/Rear 44-0313* 43623-78 2.564” Violet
` Wire Double Lip 44-0362 43613-00 Front, XL-FXD
14-0658 14-0139 47519-72 1972-82 FX *Note: Choose proper length.
Front Wheel Adjustable Inner Hub Spacer for 1973-99 wire
1973-82 FL Front/Rear wheels and most custom wheel application.
Mag Wheel VT No. 44-0639
14-0622 14-0171 25414-82 Enclosed Chain Housing
Seal for 1984 FXRT,
1982-84 FLT-FLHT
— 12-0922 11027 Snap Ring
762
44-0426 Rear Hub Rebuild con-
tains all internal parts
including longest length
Hub Rebuild
inner spacer (white
4.4480"). Spacer can
be cut down or collar
removed for some appli-
cations. Fits 1973-82
FL-FX.
VT No. 44-0426
44-0415
Rear Wheel Bearing Race Front Wheel Bearing, Race and Seal Kit contains two each,
44-0418 bearing, race and proper seals. Three kits available.
and Seal Kit. Three kits avail-
able for mag and wire wheel VT No. Fits
applications. Each kit includes 44-0415 1980-83 FXWG laced
two each bearing, race and 1973-83 FLH laced
proper seals. 1980-83 FLH cast
VT No. Fits 44-0416 1973-79 FLH cast
CLASSIC
44-0418 1982 FXR laced wheel 1973-83 FX-XL cast or wire
1973-82 All FX-FL models with 1982-83 FXR cast or wire
Laced wheel and 1980-82 FL cast wheel
44-0419 1973-84, All FX models with laced wheel and
1973-79 FL cast wheel
1979-82 XL cast or wire wheel
44-0451
44-0425
Bearing Kit includes two tapered bearings and two races
replacing 9052 for wheel 1973-99 Big Twin swing arm 1958-
85.
44-0450
VT No. Item U/M
1973-up Big Twin Hub Rebuild Kits contains bearings, races,
44-0425 Four Piece Kit Kit
seals, snap rings, seal retainer washers and seal spacers. Hub
44-0405 Race and Bearing Pair
and internal bearing spacer not included.
44-0406 Bearing Only Each
VT No. Fits
44-0407 Race Only Each
44-0450 1973-79 FL Cast Wheel Front/Rear
1973-83 All FX’s Cast Wheel Rear Only 44-0403
44-0451 1973-83 FL Laced Wheel Front & Rear
1980-83 FL Cast Wheel Front & Rear
44-0409 1973-82 FX-FXE-FXEF-FXEF-80-FXE-80 44-0400
FXWG Laced Wheel Rear Only
44-0452 1982-83 FXWG, 1982 only FXS-80 Laced Wheel
1982-84 FXR-FXRS Laced Wheel Rear Only FX-FXE-XL FXR Front Internal Hub Kit includes all internal
44-0454 1982-83 FXR-FXRS Cast Wheel only parts for complete rebuilding of all alloy front hubs. Includes
inner spacer, bearings, races seals and seal spacer matched
for each year group. Hub is not included.
VT No. Type Fits
44-0403 Drum 1964-72 XL-XLH, 1971-72 FX
Front Wheel Assembly Kit for steel hubs only. Contains two 12-0906 Drum Snap Ring for Above
each, bearing, race, seal and one each correct seal spacer. 44-0402 10” Disc 1973-only FX-XL
Also included for certain applications only are two each snap 44-0401 11” Disc 1974-77 FX-FXE-XL
ring and seal retainer washers. Not included in this kit is the 44-0400 Dual Disc 1977-83 FX-FXR-XL
internal bearing spacer. This may be ordered separately. Wheel and Swing Arm Bearing
Check listing. and Seal Kit is a deluxe kit which
VT No. Wheel Fits includes 2 of each type of seal for
44-0450 Cast 1973-83 FLH 1958-71, 1972-82, 1983-99 year
44-0451 Wire 1973-83 FLH 44-1976 group of swing arm and wheel bear-
Cast 1980-83 FXWG ing application, with two tapered cone bearing assemblies.
VT No. Item
44-1976 Deluxe Kit
12-0382 Bearing Only
12-0381 Race Only 12-0382
12-0393 Bearing and Race Kit, Two piece
12-0787 Bearing and Race Kit, Four piece
763
Star Hub Rebuild 45-0330 45-0789
44-0413 1936-66 Internal Star Hub

Component Kit includes
internal rebuilding parts 45-0323
to assemble a bare hub.
45-0806 45-0807
Everything pictured except
hub. Includes standard roll-
ers. Fits all interchangeable
wheels 1936-66 if oversize
rollers are needed order from our 9220 series in .0002 to .002. Replica Star Hubs include all internal parts, completely
VT No. Years Finish assembled, for front and rear.
44-0413 1955-66 Chrome VT No. OEM Year Finish
44-0431 1936-54 Parkerized 45-0330 43540-36 1941-66 Chrome
44-0414 Deluxe Star Hub 45-0323 43540-36 1941-66 Black
Rebuild Kit fits 45-0789 3958-36 1936-40 Black
1936-66 inter- 45-0806* Timken 1936-66 Chrome
changeable hubs, 45-0807* Timken 1936-66 Black
includes inner *Note: Hub has 3/4" Timken type bearings and requires the
and outer stars. installation to fabricate correct axle, axle sleeve and spacer.
screws, gaskets, V-Twin replicated the “Star” Hub in 1980 with over 11, 000 being produced.
thrust washers, All internals interchangeable with original and replaceable with components
from our list.
outer bearing
sleeve, snap rings, cork retainer washer and standard rollers.
VT No. 44-0414
44-0604
Star Hub Components. Available in packs for 1936-66 hubs. See complete
kits on this page for rebuilding.
Index Application VT No. OEM
1 & 2 Thrust Bearing Cover
Screws & Lock washers 8200-10 Chrome
8201-10 Cadmium
44-0535 9670-10 Parkerized
3 & 5 Hub Thrust Plate Kit 44-0535 43569-55
Hub Thrust Plate Kit includes inner star, grease fitting, and 3 Star Outer Cover, Chrome 44-0527 43566-35A
outer chrome or parkerized star. Replaces 43569-55. 3 As above, chrome 44-0465 43566-35
Chrome Star 44-0458 Without hole
VT No. Finish Fitting 4 Small Cork 15-0350 43570-35
44-0535 Chrome With fitting 4, 6 & 21 Gasket and Seal Kit 15-0630
4, 6 & 21 As Above GB 15-0637
44-0559 Parkerized With fitting 6 Star Gasket 15-0173 43576-35
6 Star Gasket 15-1054 James
44-0604 Parkerized Without fitting 7 Thrust Bearing
44-0924 Gasket Hardware Adjustment Shims (10) 12-0708 43560-35
.002 Shim 12-0720
1967-72 Hub
7 .015 Shim 12-9917 (10pc)
8 & 10 Thrust Washer (2) 44-0524 43563-35
9 Thrust Bearing Sleeve 44-0530 43556-35
11 & 18 Bearing Roller Set, 26 required
Std. Size 10-0319 9220
.0002 10-0320 9221
.0003 10-0339
.0004 10-0321 9222
.0006 10-0322 9223
.0008 10-0323 9224
.001 10-0324 9225
45-0673 .002 10-0325
12 Roller Retainer, Small 44-0531 24721-30
13 Roller Retainer Thrust
Washer, 1 used, each 44-0523 43552-39
14* Wheel Hub Chrome 45-0330 43540-36
Wheel Hub Black 45-0323 Assembly
Internal Hub Parts for 1967-72 15 Thrust Collar (for aftermarket hub) 44-0534 43561-39
16 Inner Sleeve 1939-66 44-0309 43549-36
interchangeable hubs FL-FLH models. 17 Roller Retainer, Large 44-0532 43578-35
VT No. # OEM Item 44-0408 17 Roller Retainer Washer
19 1 used, 10 pack 44-0522 43558-39
44-0392 A 41196-55 Seal Spacer 20 & 23 Lock Ring, 2 used
14-0131 B 41210-55 Seal 5 pack 10 pack 12-0921 43554-35
21 Large Cork 15-0631 43571-35
45-0673 C 43540-67C Chrome Hub, Complete 21 Large Cork, James 15-0231 43571-35
45-0758 C 43540-67 Black Hub, Bare 22 Retainer, Cork Washer
1 used 44-0521 43564-35
44-0526 D 43542-67 Locknut (Left Hand) Grease Fitting 10 pack 44-0533 9851
44-0310 E 43549-67 Inner Spacer Note: 14, Hub is assembled with all internal parts.
Internal Bearing and Hardware Kit
44-0389 E 43549-67 1967-72 Inner Spacer
for 1967-72 front and rear hubs. All
12-0331 F 43577-67 Bearing, each
parts necessary to build or rebuild a
44-0505 G 43592-70 Cover, Chrome
bare hub. Includes three bearings,
1967-72 Lock Nut and Seal Kit includes A, B and D.
tube spacer, seal, seal sleeve and
VT No 44-0408
hub lock (Left Hand Thread).
VT No. 44-0410
764
A
Rear Axle Kits
First Offered by V-Twin in 1981!
B
44-0360
C 44-0330
44-0329
D
44-0239
44-0563 8160-4
44-0567 11” Long 44-0562
44-0377 44-0218 44-0272

44-0582
CLASSIC
Rear Axle Kits include chrome axle, nuts, sleeves and spacers for each application. Nut kit includes outer sleeve and axle nuts chrome. Sleeve is included on types A,
B, C and D.
Kit Cpt Spacer Sleeve Axle only Nut Kit # Model/Year
44-0561 44-0343 44-0331 44-0216 9688-4 B 1941-52 45 Solo ,Black
44-0349 44-0323 44-0331 44-0347 8832-4 B 1941-52 45 Solo, chrome
44-0360 44-0322 44-0330 44-0226 8160-4 B 1936-57 Rigid Big Twin (Hex)
44-0377 — — 44-0231 9692-4 B 1936-57 Big Twin Hex Parkerized
44-0294 — — — — 1936-57 Big Twin, Parkerized 44-0326
44-0382 — — 44-0721 9692-4 1941-57 Big Twin Hex Parkerized Chrome Rear Axle Nut and Washers
— — — 44-0239 8160-4 1936-57 Big Twin Hex Chrome
44-0560 44-0322 44-0330 44-0215 8160-4 A 1936-57 Rigid Big Twin (Flat)
for 1936-73 Big Twin, ⁵⁄₈” x 18.
— — — 44-0272* 8160-4 1936-57 Big Twin Hex Chrome *Note: Parkerized VT No. Item
44-0348 44-0344 44-0330 44-0346 9692-4 A 1936-57 Rigid Big Twin (Flat) Parkerized 44-0326 Nut with washer kit
— — — 44-0272 9692-4T 1936-57 As Above 37-8127 Nyloc-Nut, 10 pk
44-0562 44-0321 44-0329 44-0214 8160-4 C 1958-62 FL Big Twin
44-0508 — — — — As Above Parkerized 37-0963 Flange Nut, Each
44-0235 — As Above Zinc 44-0292 Nut Kit, zinc
44-0582 44-0321 44-0355 44-0214 8160-4 C 1963-66 FL Big Twin
44-0509 — — — — As Above Parkerized
44-0567 44-0353 44-0327 44-0213 8160-4 D 1967-72 FX-FL
44-0510 — — 44-0232 — As Above, Zinc
44-0563 44-0325 — 44-0212 8715-4 1973-85 FX-FL, Chain
44-0564 — — 44-0218 8715-4 1982-84 FXWG, FL, Belt 44-0325 44-0655
Rear Axle Kit replaces 41552-73 on Rear Axle Spacers.

1973-84 chain drive FLH-FX, includes Chrome Zinc Application
axle, pyramid adjuster blocks & chrome 44-0325 44-2051 1984-86 FXST Cast/Wire Wheel
nuts.VT No. 44-1957 1973-82 All FL’s Left Cast/Wire,
1973-83 FX-FXE-FXEF-FXEF-80-
44-0727 FXWG Left Wire Wheel
1981-86 FXE-80 Wire Wheel
1973-86 All FX Cast Wheel
44-0728 44-0655 1982 only Classic 1983-up FLH-80
Cast or Wire, 1984-86 FXWG Wire
Chrome Rear Axle Kits fit 1973-84 FX & FL models. Kits
1980-86 FXB-FXSB Cast Wheel
include acorn or pike nuts. Chrome Rear Axle Nut & Washer Kit includes
VT No. Type 2 extra thick washers, nut and lock washers for
44-0727 Acorn 1973-up, on square swing arms.
44-0728 Pike VT No. Brand
44-0411 Rear Axle Seal Spacer Sets. 8715-4 Colony
44-0520
VT No. Application 44-0520 V-Twin
44-0411 1973-82 FX-FXE-FXEF-FXEF-80 44-0258 V-Twin (Zinc)
FXE-80, FXWG, Wire Wheel
44-0421 51-0680
1973-83 All FL’s Cast or Wire Wheel
1973-86 All FX’s except FXWG
44-0421 1982-86 FXR’s Cast/Wire Wheel
37-8882
1984-86 FXST Wire Wheel
1982-86 FXWG Wire Wheel Axle Protector Plates prevent axle nuts from scratching paint-
44-0423 ed finish. Sold in pairs, polished stainless. 51-0680 fits Replica
1982 only FXS-80, Wire Wheel
Rigid frames with forged rear axles plates.
1982-86 FXB-FXSB Cast Wheel
VT No. Fits Type
44-0423 1983-86 FLH-80 Wire Wheel, ea 37-8882* Rigid Frame Custom
44-1944 44-1944 1982-84 FXR with Flange 51-0680 Rigid Frame Replica
*Note: Requires drilling & tapping at axle area. Drill and tap not
included, screws included.
765
Axle Adjuster 44-0334 44-2009
44-0333
Calibrated Rear Wheel Adjusters fea-
ture chrome pyramid blocks with sight
indicator to view calibrated adjuster bolt,
for accurate and easy wheel alignment.
Adjuster bolt is chrome heavy duty 1/2” Rear Axle Adjuster Sets.
rod with micrometer markings, nut is stainless steel. Fits 1973- VT No. Models
85 FX-FLH, 1984-86 FXST. VT No. 44-2011 44-0334 1973-84 FX-FL w/chrome end caps
8100-8 44-2009 Chrome End Cap only
8101-6
44-0333 Adjuster Pull only, pair
51-0680
Complete Rear Wheel Adjuster Kit
for 1973-85 Big Twin models includes
pull adjusters, chrome end plates, 37-8882
plated hex nuts and chrome plated Axle Protector Plates prevent axle nuts from scratching paint-
tapered lock nuts. End cover and nut ed finish. Sold in pairs, polished stainless.
kit also available. VT No. Fits Type
VT No. Item 37-8882* Rigid Frame Custom
8100-8 Complete Kit 51-0680 Rigid Frame Replica
8101-6 End Cover Kit *Note: Requires drilling & tapping at axle area. Drill and tap not
44-0366 Pyramid Adjuster Block Kit. Die cast included, screws included.
chrome pyramid end caps with solid block Axle Locator Set allow use of an axle in
type pull adjusters. stock Rigid frames with ⁷⁄₈” axle slots.
VT No. Item Model VT No. Axle
44-0366 Blocks 1973-85 FX-FL 44-1946 ³⁄₄”
44-0485 Nuts 1973-85 FX-FL 44-0575 ³⁄₄”
44-0541 Adjusters 1973-85 FX-FL 44-0871 ¹¹⁄₁₆”
Rear Axle Hardware 1930-72

Rear Axle Nut and Lock Kit includes 44-0329
sleeve nut, collar, axle nut and lock clip.
Big Twin 1936-72
VT No. Type Finish 44-0331 44-0330
8160-4 Kit Chrome
8160-4T Kit Chrome 44-0327
8160-4 44-0316 Collar Only Chrome
8161-4 Kit Cadmium
9692-4 Kit Parkerized 44-0318 44-0319 44-1785
44-0355
9692-4T Kit Parkerized
37-8791 Lock Clip Parkerized
45 1930-52
9688-4 8832-4 Chrome 44-0949
8832-4T Chrome Rear Axle Sleeves for mechanical and hydraulic rear brake back-
9688-4 Parkerized ing plates. *Note: Fit between back plate & swing arm.
9688-4T Parkerized VT No. OEM Year Model Item
44-0662 Lock Clip Black 44-0331 41718-41 1941-52 45” Sleeve
VL 1930-36
44-0330 41600-36 1936-57 Big Twin Sleeve
9610-5 Chrome
9611-5 44-0864 1936-57 Big Twin Sleeve
44-0329 41600-58 1958-62 Big Twin Sleeve
Outer Rear Axle Spacers for 44-0319 41596-58 1958-62 Big Twin Side Plate Spacer (CH)
A C Big Twin. 44-1785 41596-58 1958-62 Big Twin Side Plate Spacer (PKZD)
B
44-0355 41600-63 1963-66 Big Twin Sleeve
44-0318* 41596-63 1963-72 Big Twin Side Plate Spacer (ZN)
44-0378* Chrome 1963-72 Big Twin Side Plate Spacer
44-0327 41600-67 1967-72 Big Twin Sleeve
Chrome Zinc Plated OEM # Year 44-0949 1937-57 Big Twin Sleeve Kit
44-0322 44-0344* 41595-36 A 1936-57 Rear Chain Adjuster Sets are heat treated.
44-0321 44-0339* 41595-58 B 1958-66 Available in pairs with plated lock nuts assembled to
44-0353 44-0354 41595-67 C 1967-72 insure proper fitting threads.
*Note: Parkerized Chrome Cadmium Parkerized Fits
7704-2 8014-2 9629-2 1936-72 Big Twin
— — 9629-2T 1936-72 Big Twin
7814-2 8479-2 9628-2 1930-52 Solo 45
9500-4 — — 1932-73 Servi Car
766
Front Axle Kit
44-1983
44-0568 Front Axle Kits include plated axle, nuts, spacer and hardware. Axle sleeve included when
required.
Year/Model Kit Spacer Nut Kit Axle Axle OEM Finish #
1936-48 BT Spring Fork 44-0581 44-0304 8162-3 44-0209 43872-36 Chrome A
with Sleeve 44-0300 44-1983 44-0111 9406-3 44-0085 Parkerized
1948-66 FL Glide, 44-0568 — 8162-3 44-0200 43875-48 Chrome B
44-0225 with Sleeve 44-0301 44-0225 — 8163-3 44-0224 43875-48 Zinc
1967-71 FL Glide, 44-0569 — 8162-3 44-0201 43875-67 Chrome C
1967-71 FL Glide, 44-0569 — 8162-3T 44-0201 43875-67 Chrome C
with Sleeve 44-0302
1972 only FL Glide 44-0240 44-0397 8769-3 44-0228 43875-72 Chrome D
44-0581 with spacer and flange
1973-80 FL Glid, 44-0570 44-0303 8769-3 44-0202 43875-73 41
1980-83 FXWG 44-0383 — — — 43875-73 Zinc
1981-85 FLH 44-0571 44-0303 8769-3 44-0203 43867-81 41
CLASSIC
1970-72 FX (Zinc) 44-0573 — 44-0308 44-0204 43871-52 33
44-0570 1973-77 FX 44-0574 — 8768-3 44-0205 43871-73 35
1977-83 FXE 44-0576 — 8768-3 44-0206 43883-77 35
Axles have chrome plated ends, except as noted. Order nut 44-0240 12-0331
kit separately.
VT No. OEM Fits Finish
44-0209 43872-36 1932-47 Springer Type Fork Chrome
44-0085 43872-36 1932-47 Springer Type Fork Parkerized Left Side Disc Hub Flange is used when large type disc caliper
49-1963 43871-30 1930-52 45” Solo Black is mounted to glide FL fork on 1972 only.
44-0200 43875-48 1948-66 FL Chrome VT No. Type
44-0224 43875-48 As Above Zinc 44-0240 Complete Hub Flange Kit with axle
45-0314 1967-72, Flange only
44-0228 43875-72 1972 only Chrome 44-0397 Spacer Left
44-0201 43875-67 1967-71 FL Chrome 44-0228 Chrome Axle Only
44-0202 43875-73 1973-80 FL, 1980-83 FXWG Chrome 12-0331 1967-72, Flange Bearing only
44-0222 43875-73 As above Zinc 23-0440 Chrome Lug Bolt Set
44-0203 43867-81 1981-85 FLH Chrome 2263-2 Pike Front Axle Nut Kit fits 1972-up WG,
44-0208 43346-83 1983-86 FXWG, Chrome Installed
1984-up ST models and 39mm FXR and
1981-85 FLH-80, FXD.
1984-99 all FLT, 1984-up FXST VT No. 2263-2
44-0204 43871-52 1952-72 XL 1970-72 FX Zinc
44-0205 43871-73 1973-77 XL-FX Chrome 44-0599 Front Axle Nut Kits are chrome or cadmi-
44-0206 43883-77 1978-83 XL’s Chrome um finish. Models which require sleeve nut,
1977-83 All FX except FXWG Chrome brake drum models, it is included along with
castle nuts and cotter pins.
Chrome Cad Parkerized Model
8162-3 8163-3 1946-71 Big Twin
8852-4 8853-4 9689-4 1929-36 45 Solo
44-0397 44-0303 44-0295 8855-4 9690-4 1929-52 45 Solo
Front Axle Spacers 8162-3 8163-3 1930-71 Servi
Chrome Zinc OEM Side Application 8163-3 1930-71 Servi
— 44-0397 43885-72 Left 1972 only 74 FLH 44-0308 1971-72 FX (Nut Only)
44-0653 44-0303 41594-73 Left 1973-86 FL, FLH, 8768-3 1973-up FX-XL
8769-3 1972-up FLH & WG
FLH-80, Classic
44-0599 1972-up WG
1980-82 FXWG Cadmium Front Axle Nut replaces 7734W,
44-0657 44-0295 41607-83 Right 1983 FXWG 1
/2 - 20 threads, zinc.
Speedometer Drive Spacer replaces drive units. VT No. Type
Fits 1973-83 FX. 44-0307 Each
VT No. 44-0390 44-2013 5 pack
Front Axle Sleeves.
VT No. # OEM Fits
44-0300 A 43882-36 1937-48 Big Twin
Front Wheel Seal Spacers sold each, except noted. 44-0301 B 43882-48 1949-66 FL-FLH
VT No. OEM Side Application 44-0459 Undersize 1949-66 FL
44-0391 43548-73 Left 1973 XLH-XLCH-FX-FXE 44-0384 43882-48 1941-57 FL (Kit)
44-0302 C 43882-67 1967-71 FL-FLH
44-0305 43548-74 Left 1974-77 XLH-XLCH-FX-FXE 12-0537 43886-30 Sleeve Nut
44-0306 43488-77 Left 1978-95 XL-XLS-FX-FXE-FXEF 1936-47 Big Twin Front Axle Spacers.
FXEF-80, 1982-83 FXR-FXRS- VT No. OEM Finish
FXRT 44-0304 43884-36 Chrome
44-0411 41196-78 R-L 1973-84 FL-FLH-FLH-80 44-0111
44-0111 43884-36 Parkerized
1980-86 FXWG, pair
44-0299 41196-83 R-L L1983-84 FLH-80
767
Front Hubcap
Wheel Cover Sets.
VT No. Year Fits MM
49-0299* 1949-66 Front 221
1941-57 Rear
49-0291 1941-48 Front 194
*Note: For Rigid Rear application right hand spacer must be

45-0405 45-0406 45-0666 turned down to fit into cover.
37-8349
45-0667
Chrome FL-FLH Front Wheel Hubcaps. Full 8” dresser hub-
49-0299
cap for wire wheels to fit between hub and axle without addi-
Installed
tional hardware.
VT No. OEM Years Model
45-0405 43303-49 1948-66 FLH
45-0406 43304-67 1967-72 FLH Spring Fork Hubcap Kit for 1936-48 Big Twins
45-0666 43304-73 1973-80 FLH and 1957-59 Servi-Car. Kit includes right side
45-0667 44463-82 1981-84 FLH "Atlas" chrome hubcap and left side chrome
37-8349 Fits 45-0405 Plug mini hub. Right hubcap has built in axle spacer
49-1924 and left side hubcap is held in place by wheel
1936-48 Big Twin “Atlas” Front
Hubcap is of alloy or chrome construc- hub seal spring and washer.
tion and acts as a hubcap and axle spac- VT No. Item
er on Big Twin Spring Forks. 49-1924 Set
VT No. Finish 49-0973 Left Side Hubcap Only,
49-0973
49-0968 Alloy Chrome
49-0973 Installed
49-0968 49-0977 Chrome
Replica Chrome Hubcap replaces factory acces-
sory 11260-46 to fit 1936-66 front & rear Big Twin.
Rear
VT No. Finish
Hubcap
45-0400 Chrome
fits 1936-57 45-0400 45-0769 Raw
Rigid Big
Twin.
VT No.
Installed 45-0669
Axle Cap
37-0035 37-0034
37-8885 37-8884
Chrome Rear Axle Nut Caps Set for both axle nut and axle
head where required, set screws and hex key wrench. Each
cap has an internal hex to allow more thickness for the set
37-0036 screws thread to eliminate thread stripping.
37-1510
Note: These axle caps will not work on late model rear axles
Big Twin Front Axle Cap Sets include right and left caps with cotter key locking devices.
with set screws for glide type forks. Cap included for anchor VT No. Fits
stud on 37-0035 only. 37-8885 1982-86 FXWG
VT No. Type Year/Model/Type 37-8884 1980-81 FXWG
37-0035 3 pieces 1949-71 FLH, Axle and Anchor Stud Caps 37-8885 1981-85 FX, Except FXWG-FXST
37-1510 1 pieces 1949-71 FLH, Anchor Stud Cap 37-8884 1973-80 FX, Except FXWG
37-0034 2 pieces 1949-71 FLH, Axle Caps 37-8886 1971-72 FX
37-0036 2 pieces 1972-84 FL 37-8885 1980-94 FLT
Does Not Fit Rear 1989-94
37-8885 1981-84 FLH
37-8884 1973-80 FLH
37-8886 1972 FLH
37-8885 1981-84 FLH
37-8884 1973-80 FLH
768
47-0120
Solo Seat Kit
includes leather
1965-84 Seat
seat and mount
kit for 1965-84 Installed
FL-FXE.
VT No. 47-0120
A B
Chrome Spring Mount Kit includes mounts for spring perch Solo Seat fits 1970-84 FX and1965-84 FL.
which attach to top shock studs and front clamp for nose VT No. 47-0599
bracket. Fits 1958-84 FX-FL.
VT No. Type Seat Bracket
CLASSIC
31-0502 A and B Complete Kit 31-0413
31-0174 B Front U Clamp Only
FLH Seat Bracket attaches frame 31-4018 31-0653
mount seat to 1958-84 FLH. Bolts to Chrome Seat Mount Tab use 31-4018 rear on 1981-84 mod-
stock fenders 1976-84, Zinc plated. els when installing a one piece seat. Use 31-4018, on 1979-
VT No. 31-4005 up XL Seat, VT No. 31-0413 1973-up rear. Use nylon washer
under seat tab.
VT No. Fits
31-4010 31-4018 Rear FXR
31-0413 Rear FXST-FLST
31-0653 Rear Tab Kit, 2000-up FXST, FLST
37-8858 Nylon Washer, 25 pieces
Rear Seat Mount Tab Kit allows
removal of seat without reaching
under fender. Kit includes black brack-
et, nylon washer, knob, ¼ x 28 x ¼ x
20 flathead allen screw and ¼” well
nut, to place in fender if stock ¼ x 28
hole is stripped. Purchase rear seat
31-0176 tab separately.
VT No. 31-0176
Solo Seat Mount Kits for 1936-84 Big Twin include nose Rear Set Bracket fits 1972-84 FXE.
bracket, chrome springs and rear brackets to mount small VT No. 31-4014
type solos only such as 47-0089. To mount larger Police seats
purchase cross bar separately VT No. 31-0473. To mount
K-model type solo order 31-0478 cross bar. Fits 1973-84 FX.
VT No. 31-4010
31-0580 Passenger Pad fits stock seat rails on
31-0606 1977-85 FLH-FLT- FLHT. Available in
pillow style Naugahyde to match facto-
ry style seats. Includes mount, 13” tall.
Passenger pads will fit seat rail shown.
47-8654 VT No. 47-8654
31-0518
Installed
Police Type Solo Seat Mounting
Kits for 1958-84 Big Twin. Include
nose bracket, chrome springs and
rear mount Well Made in
VT No. Spring Type
31-0580 2” Coil
31-0606 2” Hair Pin
Taiwan
Chrome Seat Rails for 1977-84 FLH Includes clamp, 13” tall.
VT No. 31-0518
769
Replica Bubble Bag Set Saddlebag Hardware
49-2418 49-2754
Saddlebag Mount Bracket Sets are to fit fiberglass bags.
49-2499 VT No. Fits Item
49-2418 1963-77 FLH Set
49-2754 1978-84 FLH Set
49-2758 1978-84 FL Set
49-2548 1978-84 FLH Right
49-2549 1978-84 FLH Left 49-2550
49-2550 1963-84 FL Rear Bracket, Each
49-2499 31-9910
Installed 49-0888
49-0889
49-2450
Chrome Saddlebag Supports are designed to fit the contour

of the fender struts and protect your bags from the brake cali-
per and swing arm. Fits 1971-85 FX-FXE.
VT No. Type
31-9910 2-Bolt
49-0888 Black, Adjustable
49-0889 Chrome, Adjustable
49-2621
49-2504
49-0381
Replica Plastic Bubble Bag Sets with 1958-84 brackets, supplied
for Swing Arm Big Twin models. Bags include locks, chrome band,
lids and inner chain.
VT No. Type Item
49-2499 Black Bags Only w/lock set installed, no brackets 49-2503
49-2498 White Bags Only w/lock set installed, no brackets
49-2450 White Bag Set with brackets and latches Saddlebag Guard Chrome Kit includes right and left chrome
49-2451 Black Bag Set with brackets and latches rail set for protecting fiberglass FLH bags.
49-0381 Lock Set One Side Only VT No. OEM Years
49-2621 Bracket Set 1958-84 Big Twin 49-2504 90800-68 1968-77 FL-FLH
49-2634 Bracket Set 1941-57 Rigid 49-2503 90800-78 1978-84 FL
Caliper Guard mounts to axle and keeps saddle-
Saddlebag Set
Black Leather Glide Set measures
bags out of wheels on 1973-85 FX-FL, 1986-99 ST
zinc plated. VT No. 48-0177
21’’ x 14’’ x 6’’ feature chrome buck-

Saddlebag Accessories.
les, spots, conchos and Neoprene
VT No. Item Fits
back to hold shape. Designed to
49-0612 Latch Kit for Both Sides 1964-68
replace the stock fiberglass saddle-
49-0995 Chrome Hanger Set 1941-57
bags on 1958-84 FLH, by mounting
to existing pins on stock bag supports or VT No.49-2418 49-0612
which are available separately. Also included are plate brack- Chrome Saddlebag Mount Bracket Sets fit VT No. fiber-
ets which may be mounted to fenders or most struts. glass bags.
VT No. 48-3132 VT No. Fits
49-2418 1963-77 FLH
770 49-2754 1978-84 FLH
Saddlebag Rail Kit and Hardware
15-0733
37-9231
49-2050 49-2051
37-9113
49-2668 49-2669 Saddlebag Hardware Kit fits one side of 1970-80 fiberglass
Saddlebags. Includes parts pictured with lock and keys.
VT No. Item
37-9113 Hardware, Left or Right (One side only)
37-9231 Lower Clip Kit, 12 piece
15-0733 Cover Rubber Gasket, each
Saddlebag Lock Kit fits FLH bags.
VT No. Item U/M
CLASSIC
49-2800 49-2612 37-8375 1969-81 Each
49-0612 1964-68 Set
37-8375
49-2759 49-2506
FLT/FLHT Saddlebag Lid Set have black finish. Hardware

and gaskets not included. Lids sold as a set.
VT No. Item Fits
49-2759 Set 1979-84 FLT
49-2506 Front Hinge 1969-84 FL, 1979-92 FLT
49-3510 49-3511 49-0618 Set 1979-85 Lock Set
Gaskets fits Late 1980-92, OEM
90633-82A.
VT No. 15-0580
15-0580
49-3513 VT No. OEM Length
49-3512
37-0566 90965-63 ⁵⁄₁₆”
White or Black Fiberglass Saddlebag Set includes left and right 37-0567 90966-67 ¹⁄₄”
sides. Including tops, latches, keys and brackets for mounting. 37-0568 90967-64 ³⁄₈”
VT No. Item
Bag Set Only VT No. 37-0545 Spacer Set to fit Saddlebags with luggage
49-2050 White Bag Set rack (A) Saddlebag tops sold each. Direct replacement for
49-2051 Black Bag Set 1970-78 models. Can be used on 1979-80 models with hinge
1977-84 with brackets kit 49-2506.
49-2668 White 49-2502
49-2669 Black
1958-76 with brackets
49-2800 White Bag Set
49-2612 Black Bag Set
Components 1964-67 Chrome Saddlebag Rail Kit includes right and left
49-3510 White Bag Lid rails. Mounting kit is available separately.
49-3512 Black Bottom, right side VT No. Item
49-3513 Black Bottom, left side 49-2502 Complete Rail Kit
49-3514 White Bag Bottom, right side 37-0874 Mounting Kit
49-3515 White Bag Bottom, left side 16-1610 in use!
Saddlebag Latch Rivet
Tool
37-0545 Spacer Set to fit Saddlebags with luggage rack
Gives secure fastening
(A) Saddlebag tops sold each. Direct replacement for 1970-78 of rivets while providing
models. Can be used on 1979-80 models with hinge kit 49-2506. a clean factory look.
VT No. 16-1610
771
Saddlebag Set
Loctite Style
48-3121
48-3144
1936 Style Knucklehead Saddlebag Sets. Conchos and a

Loctite Saddlebag Sets recreated as on 1946-48 models, five strap closure decorate these bags which are restoration
include chrome plates to fit all rigid frames. Replaces 11785- quality for all 1936-46 Rigid. Include chrome mounting plates.
43 in heavy black leather with orange rosettes. Unique design Measure 14³⁄₈” length x 5” width x 12” height.
lid keeps bags closed and in shape. Measure 16” L x 5” W x VT No. Color
14” H. 48-3121 Black
VT No. 48-3156 48-3144 Brown
Black Leather Saddlebag Sets is complete
Black X-Large Three Buckle 48-3120
with chrome mounting plates, for rigid or
Thro-Over measures 141/2” Long
swing arm mounting, conchos, fringe and
x 6” Wide x 12” High.
chrome rivets. Bags are suited for a later
VT No. 48-3127
1950’s restoration or for a nostalgic late
model dress up on 1936-57 Rigid models.
Measure 19” long x 5” width x 12” height.
VT No. 48-3120
Rear Luggage Carrier Black
"New Old Stock" Big Twin one
piece rigid frame rear luggage Large Three Buckle Thro-
carrier has a civil defense box Over. All bags glued, sewn
attached, and features a gloss and riveted. Available black
black finish. VT No. 49-0261 only. Measures 13” Long x 5”
Wide x 12” High.
VT No. 48-3128
Saddlebag 48-0176
Mount Bars
include four
bar sets with
48-0189
stanchions.
VT No.
2634-12T
Saddlebag 48-0176
Plate Rail Set. 48-0189
VT No. 50-1562
Saddlebag Mounting Plates are chrome for 1936-57 rigid

rear fenders, exact stamped as original. Order chrome acorn
mounting bolts separately.
VT No. Type
48-0176 Mount Plate Set
48-0189 Mount Plate Set
8205-8 Bolt Kit
772
Decoration
37-0501 37-1954 38-6674
38-6675
48-0074 38-6676
Krommets are available in traditional gold, chrome type or 10 38-6680

point, 10 pack, ¹⁄₄” - 20 thread.
VT No. Item
37-1954 Star Washer 38-6555 38-0923
37-0503 Chrome Rocket with Fins
37-0501 Chrome Krommets
37-0502 Gold Krommets Emblem Sets attach to fender as original accessory, but can
48-0074 Chrome Star, 5 pk be mounted to fenders and saddlebags, sold as pair.
CLASSIC
48-1433 Chrome Concho VT No. Finish Type
38-6674 Nickel Deluxe
38-0923 Chrome Deluxe, each
Bright Nickel Spots.
48-1646 Chrome Deluxe 2.5”
Original styles of the 1940’s
38-6675 Nickel O. H. V.
to dress up riding belts, sad- 38-6676 Chrome Hydra-Glide
dlebags, seat skirts, leather 38-6680 Chrome Duo-Glide
or vinyl. All shapes have two 38-6555 Chrome Electra-Glide
fastening tabs for mounting. 37-8842* — Speed-Nuts, 10 pack
Order the hand spot tool for *Note: For VT No. 38-6680.
exact spacing and ease of Nickel Spoons for dress up or
installation. Dealer packs of replacement on saddlebags. Sold
50 pieces per type except in pairs.
VT No. 37-8930 sold as VT No. 37-8927
pack of 10. Speed Ball Wings are polished
Bright Nickel Spots. VT No. Size Shape stainless steel as original, attaches
VT No. Size Shape 48-1196 5/8” Flower to leather by prong tabs or studs.
37-8843 3/8” Round 37-9040 1/4” Pointed VT No. Type
37-9036 1/2” Round 37-9041 1/2” Pointed 48-0031 Tab Type
37-9345 1/2” Round (Clear) 37-8846 7/16” Pointed 48-0032 Stud Type
37-9346 1/2” Round (Pearl) 37-8848 11/16” Chain Link 48-1647 Stud, Mini
37-9037 3/4” Round 37-8849 3/4” Oblong Bevel 48-0932 Cast Wing Set
37-8847 7/8” Round 37-8850 5/8” Red Jewel
37-8844 3/8” Pyramid 37-8853 1/2” Spot-Star Skull Krommets feature LED eyes,
37-9038 1/2” Oval pair.
37-8930 5/8” -1 Skull, 10 pack
37-8845 5/8” Oval VT No. Color
37-9159 5/8” - 1/8” Rectangular Spot
37-9039 3/4” Oval 33-0857 Red
37-8871 Spear, Pair
48-1893 5/8” Star, 5 pack 37-9076 Chrome (no LED)
37-0064 Spot, 25 pack
Hand Spot Tool replaces factory Deco 2” Set with

stud back.
accessory tool 98930-46 to install
VT No. Item
spots evenly spaced.
48-1656 Star
VT No. 16-0966 48-1656
48-0133 Silver Dollar
Conchos 1921 style
VT No. Concho 48-0133
48-0133 Installed
48-0122 Black Leather/Nickel w/tails
48-1667 Natural Leather/Rosette 1³/₄"
48-1668 Natural Leather/Rosette 2"
48-0198 Brown with Nickel
48-1433 Chrome Concho Chrome Star Stud with
stud back.
48-1667 48-1668 VT No. Item
Wing Fender Tip Ornament for 48-1893 5 pieces, small
48-1893 48-1652 48-1652 3.75” large, pair
front fenders.
VT No. 48-1434
773
Replica Windshield
51-0257 51-0303 51-0238
Assembled
1949-59 Replica Windshield for

Hydraglide features pointed bead-
ed edge top, unit fits Big Twin with
Assembled Beaded Windshields fit 1960-84 FLH Wide Hydraglide tins, fork covers and 7”
Glide forks. Lower window can be changed to Hydraglide chrome headlamp. Top replaces
style by purchasing 51-0267 window separately to fit 1949- 58020-49 for all Police style wind-
59 models with chrome 7” headlight. Purchase of bracket kit shields and fits VT No. 51-0303,
31-9953 may be necessary if the FL is not already equipped 51-0257.
with spotlamps. VT No. Item
VT No. Color of Lower Brand 51-0238 Shield, Assembled
51-0279 Clear, Assembled V-Twin 51-0268 Top Only
51-0257 Clear National 49-0167 Bracket Set, 1960-84
51-0303 Black National Adjustable Windshield fits 1960-84
51-0258 Red National FLH type.
51-0259 Blue National VT No. Color Brand
51-0267 Clear, Lower Windshield Window V-Twin 51-0264 Clear V-Twin
Products Installed on FLH 51-0310 Black National
Model Replica. 51-0266 Red National
VT No. Item 51-0265 Blue National
24-0501 Cowl Kit Polished
24-0500 Cowl Kit Chrome
33-2028 Spotlamp Kit
51-0258 Windshield
51-0370 51-0371 51-0372
51-0320
Lower Windshield. Adjustable

type, stock replacement for all 1960 51-0318
and later beaded windshields.
VT No. Type To fit National Cycle Windshields
51-0269 51-0268 51-0298 51-0370 Clear 51-0320 Clear
Clear Beaded Top Shield Only. For 1949-84 FL beaded 51-0371 Red 51-0318 Black
type windshields. 15" tall and are available with a rounded or 51-0372 Blue
peaked top. To fit OEM or V-Twin windshields.
VT No. # OEM Top Type Brand Luggage Rack
51-0269 B 58020-49A Rounded V-Twin
50-1013 Installed
51-0268 C 58020-49 Peaked National
51-0298 Rounded National
To fit National Cycle Windshields
51-0299 B Rounded National
Cigarette Lighter for Glide models fits 50-1013
1949-59 FL stock riser top cap studs.
VT No. 32-1725
2591-12
50-2048 Chrome Tour Pack Luggage Rack Three Channel Luggage Racks. Classic style of the 1960’s
includes mounting hardware. Fits 1965-70 for FLH models.
FL. Measures 10” x 7” x 2”. VT No. OEM Item Fits
VT No. 50-2048 50-1661 53403-52 Luggage Rack 1941-57 FL
50-1013 53403-58D Luggage Rack 1958-84 FLH
37-0545 90908-58 Strut Spacer 1958-84 FLH
2591-12 Chrome 1952-57 FL
774 2592-12 Cad 1952-57 FL
48-0582 48-0583
Windshield for FLH
51-0271 51-0270
51-0271 Installed
FLH Replacement Screens fits 1969-
84 FLH with fairing 4 or 5 Speed.
48-0812 48-0813 VT No. Type
51-0271 Clear 18”
51-0274 Tint 7”
51-0270 Beaded 18”
51-0274 Installed
Universal Windshield.
VT No. 51-0291
Replica FLH Windshield Bag.
Gold Trim Silver Trim Color Chrome Chrome Wind
CLASSIC
48-0582 48-0812 White Windshield Deflectors, mount
48-0583 48-0813 Black Mount Kit fits onto fork brackets.
FLH Windshield Pouch. Windshield 1949-84 FL. Fits 1960-84 FL.
bag. Heavy VT No. Replaces 58123-
oily leather, glued, sewn, riveted. Black, 31-9933 77. VT No. 50-1007
9” x 3” x 6”. VT No. 48-3125
31-9953 49-0167 49-0170
31-9955
Chrome Windshield Trim FLH Shield Hardware includes 58107-60, right and left
fits Big Twin shields on fair- extension, 58095-49 R, 58096-49 L fork brackets, for mount-
ing models. Utilizes stock ing shield on all 1949-up Glide forks. If spot light brackets are
mounting hardware. Foam installed, 58095-49 R, 58096-49L must be omitted (4 pc kit).
backed to prevent scratch- VT No. Year Item 9200-33
ing shield. Fits Late1977-85 49-0167 1960-84 Complete Kit, 4 piece
FLH not FLT. 31-9953 1949-59 Complete Kit, 4 piece
VT No. 42-0339 31-9954 1949-84 Pair
Fairing and Hardware Lexan Type for 1969-84 FLH. 49-0170 1949-59 Extensions, pair
VT No. # OEM Item 31-9955 1960-84 Extensions, pair
37-0678 D 6261 Neoprene Washer 37-8793 1949-84 Mounting Hardware
51-0271 H 58181-78 Lexan Windshield only Windshield Hardware Bolts feature chrome acorn nuts
For Beaded Type and Phillips screws to secure FL Beaded and Lexan Police
51-0270 O 58164-69 Beaded Shield shields. Stainless molding clamps are a longer version to
9201-33 P Kit Mount Bolt Set attach top to center of beaded shields, replaces 580408-50.
31-3985 S 58048-50 Clamp Windshield Molding VT No. Item U/M Type
51-1281 Brace Set 31-3985 Clamps Pair
9200-33 Screw Set Chrome
9201-33 Screw Set Cad
Windshield for Spring Fork

31-3985
49-0251 49-0262 Summer

Windshield
for Spring Fork
models 1936-48,
49-1331 includes lower
49-0868 apron as noted.
1936-57 Spring Fork Clear Windshield includes Replaces 11292-
zinc plated fittings for mounting to handlebars. 36. Includes zinc
49-0250
Mount kit is included with shield. VT No. Type plated clamp set
VT No. Item 49-0251 Black for mounting to
49-0250 Shield Complete 49-0262 Army handlebars.
49-0868 Clamp Kit, Complete, zinc
49-1331 Clamp Set Only, zinc
49-0858 Clamp Set Only, parkerized
775
51-0243
Windshield
51-0368 51-0369
National Cycle Clear Polycarbonate Deflector screen LX

features rake adjustment and quickset mounting hardware for
1" handlebars. Fits1982-1983 FXR, 1984-1994 FXR,1993-2017
FXD, 1984-up FXST, 1986-up FLST, 1994-up FLHR, 1971-
1984 FX, 1960-1984 FL, 1957-up XL. Flyscreen LS. Small windshield with a Fits all:
VT No. Type very custom appearance. Triple chrome 1970-85 FX
51-0368 Clear front plate. Flush counter sunk hex bolts. Size:
51-0369 Tint Light Tint. DOT and TUV approved.
H: 8¹⁄₂”
W: 9.75”
Approved for night use. Hardware pack-
aged with windshield.
VT No. 51-0243
Streetshield Chopped Heavy Duty.

Fits all: Wide screen look with low
1970-85 FX 51-0323 profile. A preferred choice
Clear for many.
Size: H: 14¹⁄₂” to 17¹⁄₄” W:
22¹⁄₂”
Light Tint, DOT and TUV
approved. Approved for
night use. Hardware sold
separately.
VT No. 51-0301
Mount Kit Required
Fits all:
1960-84 FLH 31-9933
VT No. 51-0302 Mount Kit Required
National Cycle Streetshield features U-clamp mounting for 1” Fits all:
handlebars. Available in Lexan or hard coated polycarbonate 1977-93 FLHS 31-0438
and either clear or medium tint. Both types are DOT approved.
51-0256
Size:
H: 17”
W: 16¹⁄₂”
Lexan Polycarbonate Color
51-0323 51-0366 Clear
51-0324 51-0367 Medium Tint
Streetshield Ex. Features 4
point ball socket mount with
Quikset hardware.
Size
51-0256
H: 18”
W: 19¹⁄₄”
DOT approved. Touring Heavy Duty for 1960-84 FLH.
VT No. 51-0325 Smoke Size: H: 19¹⁄₂” to 22¹⁄₂” W: 22¹⁄₄”
Fits all:
1970-85 FX Light Tint, DOT approved. Approved for night use.
Hardware sold separately.
VT No. Fits Mt Hardware
51-0256 1960-84 FLH 31-9933
51-0248 1980-84 FXWG 31-9931
51-0242 1984-up FXST 31-9932
776
Replica Spring Fork
OAL
49-2413
49-2400
49-2900 49-2909 49-2407

49-2420
• Forks will accept all original style components and accessories for the detailed replica
CLASSIC
look.
• These forks are replicas of the stock units with electric welded and brazed construction.
• The chrome units are unpolished at the rear fork stem cross plate and at the front spring fork
rod forging.
• Note OAL measurement points. Big Twin
Complete Assemblies, Big Twin.
49-0062 Black Chrome Type
49-2900 49-2909 Inline
49-0319 49-2407 49-2412 Offset
49-2408 49-2410 Inline 2”
49-2420 49-2417 Inline 4”
45” Inboard, with
49-1868 VL ³⁄₈” axle holes
Note: Big Rockers
have offset rocker
on the right side.
49-2400
Right
Left
Note: Big Twin forks have offset rockers on right side.
49-2430
32”
49-2417
52"!
45” has same rockers on each side,
49-2417 49-2400, 45” Style for
with the small ³⁄₈” hole.
1930-52 has inboard
45"
rockers which accept
Chrome Black Length a ³⁄₈” axle
49-2410 49-2408 30”
49-2417 49-2420 32” Powder Full
— 49-2432 42” Black Chrome Model/Type
— 49-2429 48” 49-2400 49-2413 Solo 45”
49-2416 Solo 45-XA, 2”
— 49-2430 52”
49-2401* Solo 45”
49-1763
49-2402 49-2414 Trike, 45” Servi-Car
49-1762 49-1763 45” without rockers
Longer Rocker Detail Components for extended forks with rake. 49-2606 49-2512 Fender and Horn Bracket
VT No. Item Type Set for +2" Forks Only
37-1016 Riser Stud ¹⁄₂ - 13
*Note: 49-2401 has chrome front leg and black rear leg.
777
Spring Fork 22-0740 Black Brake Control Kit
features a pressed steel
brake drum, backing plate
with early adjuster, and
Springer Brake Kit. Early style with thin brake stay bar which
finned brake drum. is exact for 1936-37 UL
VT No. & EL. Restoration quality
22-0859 1936-39 (thin pressed drum) throughout!
22-0740 1938-40 VT No. 22-0452
Spring Fork Legs

49-1172
49-0029
Spring Components.
VT No. Item
49-1312 Fender Mount Tab
49-1172 Sleeve Set
49-0029 Front Tubes, Raw
49-0059 1" Stem 49-1312
49-0374 ⁷⁄₈" Stem for 45"
Spring Fork Front Brake Anchor Stud Kit includes
raw steel stud and parkerized adjuster screw. Brake
cable anchor stud for front backing plate was used
until 1940 on Knucklehead VL, UL, RL, and WL 45”.
Wheel Cover Set for glide fork applications on a 16” star hub You can also use this stud to make a 1941 and up
wheels with brake drum. backing plate into an early style backing plate. Must
VT No. Fits be peened over or welded into place after installation.
49-0299 1949-66 FL VT No. 49-1742
Front Inline Rear Fork Legs fit 1940-57 45”
49-0291 1941-48 FL Solo
Black Chrome
49-0388 49-0342
49-0830 Fits VL Spring Fork Assembly
49-1868 Black, Rear
23-1207 49-0342
Lug Bolt Kit includes 5 lug bolts and “T” wrench.

VT No. Lugs Front Springer Fork Leg.
49-0830 Parkerized Black Chrome
23-1207 Chrome 49-0616 — BT Spring Fork Leg
49-0408 49-0409 Spring Fork w/Rods, BT
49-0332 49-0343 45” Front Leg
49-0421* — Stud Hole 45”/74” Adapters
7707-4 — Spring Rods, pair
37-8675 23-0440 37-8691 49-0337 — 45” Servi-Car R. Leg Inline
49-0408 *Note: Allows installation of Big Twin Rockers on
45” fork.
7/8 to 1" Neck
Conversion Kit
37-8919 49-0457 23-0090 includes cups and
Wheel Lug Bolts for brake drums. Use tap 16-0807 for ³⁄₈ — 20. tapered bearings for
Black Chrome OEM Years Fits 1" fork to fit early
37-8675 23-0440 43530-35A 1936-72 ³⁄₈ — 20 Sportsters and 45"
37-8691 — 43530-35A 1936-72 ³⁄₈ — 20 frames.
— 37-8919 43531-35 Oversize ⁷⁄₁₆ — 20 VT No. 24-1324
49-0457 — 43531-35 1936-37 ³⁄₈ — 20
23-0090 — 43631-35 1936 ³⁄₈ — 20
Front Stand Mounting Kit Brake Tab fits 1936-57 Spring Fork. Must
Parkerized reproduction of all items needed to be welded on.
mount the front stand 1941-1942 G, and 1942- VT No. 49-2655
1943 WLC.
VT No. 3086-12
778
Shock and Ride Control
49-1942 49-1985
49-1940
Replica Ride Control is reproduced as original to control
the action of the Spring Fork. Features steel side bars with
black control knobs. Replaces 11250-36 on 1937-48 61”, 74”
and 80”, 1940-57 45” models.
VT No. OEM Item Bars
49-1985 11250-36 Complete Unit Chrome
49-1954 49-1940 11250-36 Complete Unit Stainless
49-1775 Bracket Set Raw Steel
49-0139 13440-33 Includes the following:
CLASSIC
13444-33 Knob, Collar and
13442-33 Spring Clip
49-1680 Strap Set Stainless
49-0140 13431-33 Friction Disc (4 pack)
49-0142 54051-33 Rubber Bushing (2 pack)
3054-16 13457-36 Ride Control Side Plate Stud Kit
13454-33
49-1678 Kit Rebuild
49-1313
49-1677
49-1675 49-1677 Installed
49-1557
Replica Spring Fork Shock Assembly replaces 54200-45, Scissor Type Fork Damper fits 1936-48 Spring Forks on Big
includes all shock and mounting hardware for 1946-57 Spring Twin and 45”. 49-1554
Fork. VT No. Item
VT No. Item 49-1675 Parkerized Scissor
49-1942 Complete Kit, Black 49-1677 Chrome Scissor
49-1313 Shock Only 49-1554 Mount Kit
49-1954 Replica Hardware Only 49-1557 Bracket
49-1775 Weld On Brackets 49-1577 Parkerized Kit
28-1951 Bushing set (14002-45) 4 pieces 49-1563 Chrome Kit
49-0241 Loom Clip (9973) V-Twin 49-1775 Front ³⁄₄” Axle fits 1936-57 Replica Spring Forks or OE Big
2504-1 Loom Clip Colony Twin with offset rockers.
Spring Style Front Fender fits 18”, 19”, VT No. Item
44-0752
and 21” wheels. Brackets must be fabri- 44-0752 Axle
cated. 44-0307 Nut
VT No. 50-0780
Fender
Springer Fork Rod Shock Set fits 1944-48 50-0883
BT. Set includes two shock units to replace
rods on front spring fork legs.
Spring fork rods are zinc plated steel.
VT No. 49-0498 Chrome Billet Fender Clamps will mount 50-0176 fender to
spring forks with 1” outside diameter front leg.
VT No. Item
31-1009 Front Leg Clamp Set, Fits 1” Legs
31-0057 Brace, Zinc Plated, Fits OE Style Front Leg
50-0883 Fender
779
Spring Fork Hubcap
49-0973 49-1924
49-1952
49-0968
VT No. OEM Year/Model Item

49-1955 2776-36 1937-40 Big Twin Complete assembly
49-1953 46701-40 1940-57 45” Complete assembly
49-1700 46717-30 All Models Steel disc
49-0607 46717-30 All Models Steel disc, cadmium
49-1701 46727-30 All Models Fibre disc (2 pieces)
49-1702 46746-30 All Models Adj nut
37-0709 7789 All Models Lock nut, 5 pack
49-1704 46757-36 1941-48 BT Stem screw 49-1924 Installed
49-1705 46758-37 1940-57 45” Stem screw 1936-48 Big Twin “Atlas” Hubcap is of alloy or chrome con-
49-1706 46758-40 1940-57 45” Bracket
49-0026 46758-40 1940-57 45” Bracket, Cadmium
struction and acts as a hubcap and axle spacer.
49-0049 2792-36 1936-40 BT Bracket, Parkerized VT No. Type Finish
49-0024 2792-36 1936-40 BT Bracket, Cadmium 49-0968 Right Side Alloy
49-0362 2792-36 1936-40 BT Bracket, Zinc
49-0863 46760-41 1941-45 BT Bracket, Cadmium
49-0977 Right Side Chrome
49-0864 1946-48 Bracket, Cadmium 49-0973 Left Side Chrome
49-1708 46760-46 1946-48 74/80” Bracket, Parkerized 49-1924 Left and Right Chrome
49-1709 46765-40 1940-57 45” Rod
49-1719 2779-36 1937-40 BT Rod Springer Dress Up Kit includes a top
49-0512 2779-36 1937-40 BT Rod, Cadmium
49-1710 46766-41 1941-45 BT Rod
“bridge” with 2 chrome cap nuts and a 4
49-0513 46766-41 1941-45 BT Rod, Cadmium piece spring cover set.
49-1712 46775-30 All Models Adj washer, 5 pack VT No. 49-1330
49-1713 46777-30 All Models Release spring
49-1714 46779-30 1930-48 All Fibre washer
49-1715 88936-18 1930-48 All Spider washer, 5 pack
49-1505 49-0732
49-2651
49-2651
Spring
Covers
Installed
2584-7 2585-7
Chrome Springer Spring Cover Set fits 1936-57 forks.

Includes four piece set for upper and lower.
Damper Rod Handle Kits. VT No. 49-2651
VT No. Year Handle
2584-7 1936-48 BT Chrome 49-2565
2585-7 1937-52 45” Parkerized
1953-57 Solo Parkerized
49-0732 1936-47 BT Chrome
49-1505 1936-57 BT Chrome
49-2565
Chrome Rocker Cover Set with bird for Spring Forks. Set of 2.
VT No. 49-2565
49-0517 49-0518 49-0538 49-1785
Damper Handles.
VT No. Fits Finish
49-0517 1937-42 EL, U, W Chrome
49-0518 1937-42 EL, U, W Parkerized
49-0538 1936 EL Chrome
49-1785 1936-52 W, 1936-57 G Chrome
1936-47 EL, 1941-48 FL
Damper Cover
780
49-0467 49-2006
Spring Fork Rebuild
49-2011 7606-26 49-0235 7608-6
49-2563
49-2582
49-0644
49-0627
7607-7
49-0848
49-2745
Front Shackle Hardware. Shackle Bar includes two bushings,
CLASSIC
order hardware separately. Complete hardware kit includes
parts illustrated except bar. Partial kit includes shoulder bolt,
lock tabs, and special nut/grease fitting only.
VT No. Item Fits Finish
49-0467 Shackle Bar 1936-38 BT Black 49-0319
49-2006 Shackle Bar 1940-48 BT Black Fork Rockers.
49-2011 Shackle Bar 1941-48 BT Chrome VT No. Item
49-0627 Shackle Kit 1941-48 BT Black 7606-26 Complete Hardware Rebuild Kit
49-0644 Shackle Kit 1941-48 BT Chrome 1941-57 Servi-Car, 1941-48 BT
8010-10 Full Rebuild Kit All Cadmium 49-0235 As Above, by V-Twin, less bushings
8010-10T Full Rebuild Kit, Zinc All Zinc 7608-6 Rear Rocker Stud Kit
49-0848 Shackle Bar Hardware Kit 1941-48 BT 7607-7 Front Rocker Stud Kit
49-2563 Stud w/Lock and Nut Kit All Zinc 7610-4 Bushing set four 4 piece, (45667-30)
37-9152 Lock Tab, 5 pack All — 7610-4T Bushing set four 4 piece, (45667-30)
49-2012 Bushing, pair All — 49-2582 Rocker Kit, Black
49-1742 Anchor Stud 49-2745 Rocker Kit, Chrome
49-0528 9216-22 49-0319 Rocker Set 45655-30, (45658-30), Black
49-0318
49-0320 Rocker Set, Chrome
7609-6 Lock Tab Kit, 6 piece
49-0571 Lock Tab Kit, 6 piece
2913-2 Spacer, Parkerized
2914-2 Spacer, Cadmium
49-2635 Locktab Front Rocker Stud
49-0461 3086-12 Stud Kit, G, Front
2635-2 Fork Rocker Stud Kit, 1940-57 G
49-0547 Rocker Set
49-0824 Flanders Riser Kit
49-0849 Riser Kit
49-0314 49-0062 Rebuild Kit for Shackle Bar
for Spring Brake.
VT No. Year Model
49-1007 49-0848 1936-57 Big Twin
45 Solo Model 8010-10 1939-57 Big Twin
VT No. Year Item 49-0848 8010-10T 1939-57 Big Twin
8010-10
49-0528 1936-52 Spring Fork Rocker Kit 2299-10 1936-38 Big Twin
8011-4
49-0318 1930-52 Kit Complete Hardware 2299-10T 1936-38 Big Twin
9216-22 1930-52 Colony, Kit 2651-10 1939 Big Twin
8011-4 1930-52 Stud Bushing Set and 45
8011-4T 1930-52 Stud Bushing Set
49-0314 1930-52 Chrome Rocker Set with ⁵⁄₈” axle hole 2299-10T
49-0062 1930-52 Rocker Set, Stock, (45661-30) black Spring Fork Rocker Bushing
49-0461 1930-52 As Above chrome 7611-2 Remover-Installer Tool will
49-0460 1936-52 Stud Set (Solo) replace stock steel bushings on
2773-1 1931-36 Shackle Fitting 1930-57 Spring Forks.
49-1007 1929-36 RL VT No. 7611-2
49-1870 1930-38 45” Shackle Bar, Black
9019-2 Lock Tab
781
Spring Fork 7613-2 49-0516 49-0524
13-1937
Spring Fork Acorn Nut and Retainer Set feature cadmium
plated spring retainers and appropriate acorn nut finish.
VT No. Year Model Finish
9417-4 1930-35 VL-RL Parkerized
7613-2 1936-57 Big Twin and 45 Chrome
7613-2T 1936-57 Big Twin and 45 Chrome
49-0573 1930-57 All Top Acorn Nut Kit
49-0516 1936-57 All OE Type, Parkerized
13-0585
49-0526 1936-57 All OE Type, Chrome
49-0524 1936-57 Chrome/Zinc
Spring Fork Rod Kit. Rods are heat
treated for wear resistance and parker-
ized as original.
VT No. Fits
7707-4 9862-8 1931-36 VL
7707-4 1936-47 Big Twin and 45’s
49-2602 Spring Fork Rod and

Bushing Set includes
2 rods 45614-36 with
nuts and 2 bushings for
1936-57 Big Twin and 45
13-9200 13-9201 13-0226 Springers.
VT No. Item
Spring Fork Springs fits 1937-57 45” and Big Twin.
Outer Springs 49-0661 49-2602 Kit
Chrome Black OEM Finish/Type U/M 49-0473 Rod Set Only
13-0585 Set, 8 49-0661 Top Nut Set
13-0589 Parkerized Set, 8 49-0570 Hex Nuts
13-1937 46055-30 Upper Set 49-2573
46056-37 Lower 1946-57 Rod Bushings and Plate
13-0787 As above Nickel Set, 4 VT No. OEM Item
13-1936 As above Parkerized Set, 4 49-2573 45643-45 Ball Bushing
13-1944 1936-57 Parkerized Set, 6 49-2572 49-2572 54230-45 Retainer Plate
13-1935 1930-36 VL Pakerized Set, 4
Spring Fork Spring Rod Bushings are
Inner Springs
replacements. Sold in pairs.
13-9200 13-1939 Lower 2 Note (A) Pair
VT No. Finish
13-0037 46056-37 Parkerized
49-2603 7706-2 Cadmium
13-0226 13-0225 46058-36 Lower 2 Note (B) Pair
7706-2T Cadmium
13-9201 13-1968 46057-30 Upper 2 Note (B) Pair 49-2603 Black
Note:(A) Long type for side car and Servi-Car. (B) Feature 49-0393 Zinc
bend to prevent rattle.
49-0993 49-0546
49-0109
Spring Rod Stabilizer, includes two chrome cap nuts.

VT No. Item Early Spring Fork Rebuilds. Send us your early springer fork
49-0109 Stabilizer, Brass (pre1958) any model and we will rebuild it completely. Includes
49-0993 Replica Stabilizer new bushings, studs, bearings, locks and washers. Rockers
49-0611 Cross Strap and powder coating available at an additional cost and spring
8420-1T Cap Nuts (Pair)
8420-1 Cap Nuts (Each) inspection assessment done replaceable at an additional cost.
VT No. Item
Spring Fork 60-0190 Complete Spring Fork Rebuild
16-1003 Assembly Clamp 60-0191 As Above with New Rockers
facilitates building of 60-0192 As Above with Powder Coating
stock type forks by (Black Only) Strip/Phosphorize/Coat
compressing upper 60-0193 As Above with Powder Coating and
and lower spring. New Rockers
VT No. 16-1003 49-0546 Rocker Stud Set
Square Springs. OE type springs wound with
square wire with AEE chopper style!
VT No. 13-0960
782
24-0655
Spring Fork
Spring Fork Stem Nut
Colony VT No. Finish Fits
8484-1 8484-1T Chrome 1936-48 Big Twin
24-0656
8485-1 8485-1T Cadmium 1936-48 Big Twin
Complete Spring Fork Installation Kits include plated neck 9720-1 Parkerized 1936-48 Big Twin
cups, ball bearings, upper and lower races, nut with dust cover 8486-1 8486-1T Chrome 1929-57 45”
pressed on and top nut. 8487-1 8487-1T Cadmium 1929-57 45”
VT No. Years Model Finish 9713-1 Parkerized 1929-57 45”
24-0655 1939-57 45” and Servi-car Zinc
24-0656 1941-48 Big Twin Zinc
24-0661 1941-48 Big Twin Chrome 24-1373
24-1373 1939-40 Big Twin Zinc
49-0034 1936-38 Big Twin Cadmium
37-0442 7802-1 24-1459 8008-1
*Note: Big Twins use 34 balls, 45” use 30 balls.
Knucklehead Spring Fork Bear- Chrome Stem Nut. The shoulder on its base fits into the top
CLASSIC
ing Assembly includes cadmium triple clamp for positive alignment.
plated neck cup set, cadmium stem VT No. Fits
nut, nickel plated cone nut with 37-0442 Big Twin
integral upper race, lower race and 7802-1 Big Twin, Colony
balls. 24-1459 Big Twin, Early Years
8008-1 45” Model, Colony
VT No. 49-0034
49-0059 Stem, BT
Spring Fork Conversion Kit 49-0028 Stem 45"
allows installation of 45” type
small post rear forks to be
installed on Big Twin 74” frames.
Includes parts shown, available
zinc and black oxide finish.
49-0086 VT No. 49-0086 24-1415 24-0150
24-1313 24-0679
24-0110
24-0151 24-0156 24-0638

24-0109
Replica Spring Fork Cone Nut isgear type with dust shield
24-0134 pressed on.
Ball Bearing Neck Cups available in pairs as cups only or kit VT No. OEM Fits Year Finish
with races and ball bearings. 24-1415 2753-31 61” 1936 only Nickel Plate
VT No. OEM Years Use Finish 24-1370 Nickel 1936 only Unpolished Plate
24-0109 48311-36 1936-47 74” and 80” Zinc Cups Only 24-1313 2753-36 74-80” 1937-39 Nickel Plate
24-1763 1936-47 74” and 80” Raw 24-0150 48327-36 74-80” 1936-47 Black
24-1780 Cadmium 1936-47 74” and 80” Cadmium 24-0679 48327-36 74-80” 1936-47 Chrome
24-0134 Kit — 74” and 80” Chrome 24-0151 48335-40 45” 1940-47 Black
24-1078 Kit 1936-47 Parkerized 24-0156 Conversion 45” to 74” Nut, ⁷⁄₈” thread Black
24-1569 Kit 1930-36 VL Zinc 24-0638 Conversion 45” to 74” Race Only Black
24-0110 48310-30 1930-52 45” Zinc Cups Only Cone Nut Wrench features pins to turn cog style
24-0093 Kit 1939-57 45” Chrome cone nut ³⁄₈”drive. VT No. 16-0178
12-0157 8860 ⁵⁄₁₆” Balls 50 pieces
12-0128 8860 ⁵⁄₁₆” Balls 30 pieces
24-0230
Ball Bearing Races fit Big Twin Spring Fork and
1952-77 Sportster type, 1929-57 45’s. Sold each.
VT No. OEM Years Use

24-0099 48346-39 1929-57 Upper and Lower 45” 24-0245
24-0100 48345-36 1936-48 Upper and Lower 74” and 80”
49-1507 1936-38 Lower
24-0638 Special 1936-37 45” Stem fits Big Twin Tapered Bearing Conversion Kits.
24-1078 45” 1929-57 Kit VT No. Years Model
24-0230 1936-48 Big Twin
Lower Bearing Guard centers lower race on stem.
24-0245 1939-57 45” and Servi
VT No. OEM Fits
Fork Bearing Race Set includes 1 threaded
49-2000 48361-38 1936-48 Big Twin
upper and 1 lower race. Fits 1930-1936 VL.
49-2001 48363-40 1936-57 G
VT No. 24-1749
1936-52 W
783
Spring Fork Top Tree and Riser
25-2124
26-2169
25-2127
25-0785 25-2117 25-1166

Replica Glide Riser Set fits Spring Fork top trees with 1” ears
to allow rubber mounted glide riser to be fitted with 1 piece for
handlebars.
49-0944 49-0939 VT No. Item
49-0944 25-2117 3" Glide Risers, chrome, pair
& 26-2169 Riser Posts, pair
25-2117 37-8820 Bolt Set, pair
49-0954 Installed
25-1166 3.5" Offset Riser Kit
49-0093 Inline Riser Kit
Chrome Dog Bone Steel Paugcho Riser
is machined from solid steel.
49-0315 VT No. Rise
25-2158 3”
25-2159 5”
25-2217 25-2219
49-0044 49-0997
Spring Fork Top Tees and Risers. Order pinch bolts for trees
separately.
VT No. Item Finish
25-2217 Dog Bone 5.5” Chrome/Zinc Flanders Triple Tree Kit includes zinc plate tree and dog bones.
25-0950 Dog Bone Riser Kit, 5.5” Chrome/Chrome VT No. Item
25-2219 Dog Bones 3” Chrome/Zinc 49-0044 Inline, brass 4” dog bones
25-2124 Dog Bones 4” Chrome 49-0997 Offset, 5.5”
25-2253 Dog Bones 4” Cast Brass Riser Kit Stud Set is installed
49-0944 Top Tree with Ears Inline Chrome fits offset by tapping top of
49-0939 Top Tree with Ears Inline Zinc original fork with 20mm tap.
49-1541 Top Tree with Ears Inline Satin Nickel Springers. to mount top plate
49-0954 Top Tree with Ears Offset Chrome VT No. to install riser bars.
49-0955 Top Tree with Ears Offset Satin Nickel 49-0763
49-1548 Top Tree with Ears Offset Satin Nickel
Screw In Riser Stud installed by threading
25-2127 Flanders Risers 4” Chrome
the I.D. of the upper fork tubes. Use ³⁄₁₆ x
25-0785 Flanders Risers 5.5” Chrome
28-0910 Flanders Rubber Bushing Set for Above 16 tap to thread top spring fork holes. Riser
49-0315 Machined Tree without Ears Inline Chrome studs are ¹⁄₂ x13 thread to accept riser and
49-0371 Top Tree without Ears lnline Chrome ³⁄₄ x 16 to thread into fork.
49-0022 Top Tree without Ears Inline Black VT No. 37-1016 ¹⁄₂ x 13
9217-4T 9508-4T
25-0782
25-0783
Pinch Bolt Kit includes pinch bolts and lockwashers. T-Bar Clamp is used in mounting handlebars with built in
VT No. Fits Finish risers to custom Paughco or Wyatt Gatling springers. Use on
9217-4 1936-52 WL, 1941-1948 FL Chrome top of existing top clamp. For replica forks use with top tree
9217-4T 1936-52 WL, 1941-1948 FL Chrome 49-0371. 37-1016 Installed
9218-4 6033-30 Cadmium VT No. Item by threading
25-0782 T-Bar Clamp upper tubes on
2749-4 6033-30 Parkerized
forks
9508-4 1936-52 WL Parkerized without hardware
9508-4T 1936-52 WL Parkerized 25-0835 T-Bar Camp w/hardware
2750-4 Pinch Bolts, 1937-39 WL Parkerized 25-0783 Mounting Hardware Kit for 25-0782
Replica Style Bars. Original 49-0043 Kit includes hardware and 49-0371 top tree
Buco style of the 1950’s, for use 49-0371 Top Tree fits inline forks, allows use
with a dog bone style triple tree of post risers with ¹⁄₂” mount bolts.
set up. Order acorn nut separately.
VT No. 25-0438 Chrome Black Item
49-0371 49-0022 Tree
25-2131 25-2218 Stem Set
784 37-0442 Acorn Nut
25-0800
Riser
25-1271 25-1946
25-2255
49-0093 25-1755
49-0997
5¹/₂” Dog Bone Kits.

VT No. Type
25-0800 Inline, Complete Assy Brass Risers are Forged
CLASSIC
25-2255 Offset, Complete Assy 48-1476 25-0944
49-0997 Offset, 5¹/₂” chrome risers machined from forged
49-0093 Inline, 3¹/₂” brass risers shape billet. V-Twin
49-0861 Inline Kit Exclusive!
These solid brass risers start out as a raw forgings and gener-
ally have imperfection on the surface, like forgings voids or pits.
49-1163 48-2289
These will dull with age, but can be re-polished to a high luster.
Brass is soft so be careful, not to dent them with a wrench or
hammer.
49-0825 Flanders Risers.
49-1927 VT No. Finish Size
Stelling & Hellings. 25-1271 Brass, Polished 3.5”
VT No. Style 25-1946 Chrome 3.5”
49-1927 Riser Set, Stainless Steel 25-1755 Brass, Polished 2”
49-1163 Offset Tree 25-0944 Brass, Polished 5.5”
49-0825 Inline Tee
49-0290 49-0289 49-0438
49-0439
Stelling & Hellings Kits.

VT No. Type Spring Fork Handlebar Kit includes 4" chrome Flanders style risers,
49-0290 Inline zinc plated inline or offset tree, and Buckhorn 1" handlebars with knurls
49-0289 Offset in proper position for the riser-tree combination. Fits 1936-1957.
25-1275 25-1753 25-1751 VT No. Item
49-0438 Inline
49-0439 Offset
25-0984
25-1254 25-0785
25-0800
Flanders’ Replica of the fabu-
49-0489 lous 1950 accessories, use with
Stelling Riser Stems and Clamps dog bone trees and risers.
VT No. Height Item
25-1275 1¹⁄₈” Riser Stems
25-1753 3” Riser Stems 25-0823
25-1751 5” Riser Stems VT No. Item
49-0489 Brass Riser Tops
25-0438 Bars 5¹⁄₂”
25-1253 Bolt Set
25-1254 Hex Type Bolt Set 25-0785 Riser Set
25-0984 4” Flanders Riser Kit 25-0800 Handlebar w/Flanders Risers and Dog Bone Tree
25-0361 Nut Set 25-0823 Replica Flanders Handlebar, Chrome
785
Handlebar for Springer
36-0481 36-0498
49-0349
36-0497
49-0348
49-0349 36-0499
36-2551 36-2574
49-0352
Throttle Spirals and Cable Kits include all internal parts for
years listed. 1936-48 style features chrome spiral sleeves.
VT No. Years Sides Throttle
36-0481 1936-48 2 None
49-0353 36-0498 1936-48 2 Push
36-0497 1949-53 2 Push
36-0499 1954-64 2 Push
36-2551 1965-70 1 Push Nickel Plated
36-2574 1971-73 1 Pull Control Coil
49-0482 36-0961 Inner Wire Set Both Nuts.
36-0073 Inner Throttle and Spark Wire Set VT No. 2459-4
36-0907 54" Replica Throttle Or Spark Cable
36-1457 Cable Kit for Throttle and Spark Controls
49-0483 49-2005 49-0158 49-0911
Complete Handlebar Assembly for Spring Fork is available Handlebar Spirals.

with chrome or black finish. Units are fitted with all internal throt- VT No. OEM Years Type
49-0083 56245-35 1935-48 Push, Raw 49-1571
tle components, including cables and grips, chrome horn and 49-0227 3312-16 1916-34 Push, Chrome
dimmer switches are installed with proper cloth covered wires. 49-2005 56245-35 1935-48 Push, Chrome
VT No. Finish Type Style 49-0857 Set 1935-48 Push, Chrome
49-0090 Black Inline Speedster 49-2065 — 1935-48 Push, Oversize
49-0092 Chrome Inline Speedster 49-1571 1/2 Turn 1935-48 Push
49-0087 — 1936-48 Pull 49-1578
49-0348 Chrome Inline Speedster 49-0650 56220-48 1949-53 Push
49-0349 Black Inline Speedster 49-0662 — 1949-53 Push, Oversize
49-0352 Chrome Offset Speedster 49-0158 56220-53 1954-70 Push
49-0353 Black Offset Speedster 49-0911* 56220-58 1971-74 Throttle Pull
49-0482 Chrome Inline Buckhorn 49-1324 Flanders Push
49-0483 Black Inline Buckhorn 49-1371 Flanders Pull
49-1578 1/2 Turn Pull
49-0748 Chrome Inline Stelling and Hellings *Note: Reverses direction on 1954-70 throttle
Grip Sets
28-0104 28-0105 28-0106 28-0101 28-0102 28-0178

1909-34 Vintage Style Grip Set replaces the 1909 version Replica Short Stock Grips replace 3310-35B. Fits 1935-48
3310-09 for restoration on 1909-34, inner diameter 11/8” on both
sides. with stock controls.
VT No. Color VT No. Color Beck Handlebar Grip
28-0179 28-0481 Set features the original
28-0104 Black 28-0101 Black
28-0105 White 28-0102 White 1940's design for Spring
28-0106 Red 28-0178 Grey Fork handlebars. Grips
28-0179 Grey have an inner diameter
28-0481 Black
of 1¹⁄₈" on both sides.
786 VT No. 28-0480
Handlebar for Springer
49-0510 49-0321
49-0331
B
49-0015
49-0323
C
CLASSIC
49-0018
Spring Fork Handlebars fit inline stem 49-0510 Detail

Springer Handlebars feature Speedster design as original with
models 1936-57 45, 74 and 80 models,
full brazed construction as the triple tree and throttle & spark
offset 1946-48 Big Twin. Available in
collars.
VT No. Assembly Type Finish Type black or chrome finish. Order pinch
49-0510 49-1388 Speedster Black NL bolts and head cone lock plate as listed.
49-0005 Speedster Black See web for measurements. 49-0510
49-0015 49-0615 1936 EL Black NL Chrome Black Type # Style
49-0018 49-0032 1936 EL Chrome NL 49-0322 49-0321 Speedster A-Inline
49-0013 1945-48 Raw OS — 49-0510 Speedster Brazed
Handlebar End Nuts.
VT No. Years Type 49-0742 49-0741 Speedster A-Inline
7625-2 1931-35 Parkerized 49-0762 49-0761 Speedster Offset
16-1262 7626-2T 1931-35 Black Oxide 49-0323 49-0324 Buckhorn C-Inline 49-0762
7626-2 1936-48 Parkerized 49-0484 — Buckhorn C-Offset
49-0957 1936-48 Parkerized 49-0334 — Speedster A-Offset
16-1262 1936-42 Tap
49-0327 — Buckhorn C-Offset
Upper Head Cone Lock Plate acts as
49-0346 — Standard B-Offset
7626-2T lock and top tree cover, polished stainless
36-0498 — Internals For Above
49-0941 steel has pin installed.
9217-4 — Pinch Bolts Chrome
VT No. Center Finish
9218-4 — Pinch Bolts Cadmium
49-0941 Inline Stainless Steel Replica
9508-4 — Pinch Bolts Parkerized
49-0805 Inline Stainless Steel
9508-4T — Pinch Bolts Parkerized
49-0981 Offset Polished Stainless Steel 49-3461 Inline Speedster
49-3463 Inline Speedster
49-1024 49-1029
9005-4 31-0537 31-0973 31-0787 Offset Inline

Throttle Brackets have parkerized finish and mounting hard-
49-1104 49-0022
ware as original.
Overhead Valve (OHV)
VT No. OEM Year
9005-4 3371-36 1936-48
31-0537 56605-49 1949-53 Spring Fork Triple Tree. Raw for handlebars.
31-0973 Parkerized 1949-53 2041-7 VT No. Type Finish © 2001
31-0787 1948 49-1024 Offset Raw
2041-7 45218-52 1971-72 49-1029 Inline Raw
Throttle and Spark Cable Brackets have parkerized finish and 49-1104 Inline Zinc
mounting hardware as original. 49-0022 Black, without ears Black Bobber Patch Set.
Side Valve (SV) VT No. 48-1515
9006-4 B 3371-37 1937-48 Big Twin Throttle
49-0553 — 1936-48 — Clamp 9006-4 9008-5
9007-2 C 9967 1930-73 45” Throttle & Spark
9008-5 D 55627-38 1930-48 Big Twin Spark
2627-4 56626-37 1937-46 Big Twin Spark 9007-2 49-0533
49-0533 1937-46 Clip
Do you have the OEM number? Check our data base from over 15,000 part numbers referenced by Factory OEM numbers.
www.vtwinmfg.com
787
Hollywood Bar
49-0901
49-0372
49-0902 49-0860
49-0373
49-0487
49-0859
Hollywood Handlebars feature cross brace for added rigidity.

Black Chrome Type
Bars Only
49-0486
49-0372 49-0860 Inline
49-0373 49-0859 Offset
Assembled Type
49-0487 49-0901 Inline
49-0486 49-0902 Offset
Springer Bar Flanders’ Handlebar

49-0726
25-0823
49-0727 Replica 1” Spring Fork Flanders’ Handlebar fits 1941-52.

Stelling & Hellings Bars are 4" taller than the VT No. 25-0823
Speedster as developed by John ‘Jack’ Tracey
of Yonkers, New York in 1940’s. Bars accept
short Stelling's throttle and spark spirals.
VT No. Type
49-0726 Inline
48-2289 49-0727 Offset
49-1014 Inline, Hillclimber
Flanders' Handlebar Kit for Spring Fork models includes inline
dog bone triple tree, triple tree cover, chrome 5.5" Flanders
style risers. Features bars that are specially knurled in the prop-
er position for Flanders risers. Fits 1941-52.
Inline Center VT No. 25-0850
Black Offset Center
VT No. 49-0322 VT No. 49-0325
Chrome Spring
Fork Bars feature
1” ends to accept
late control handles.
Features offset.
VT No.49-0896 "TT" Short Springer Handlebar is inline type, black with the
short design for inline Spring Forks and accepts stock handlebar
spirals.Fits 1936-52.
VT No. 49-0998
788
22-1083 22-1084
Brake for Springer
49-0853
22-0776 22-0780 49-0853 49-0852
Spring Fork Front Brake Kit includes cable end, shackle

adjuster, cable, backing plate, brake shoes, springs, drum, 22-0987
49-0853
lugs arm, cam, pivot stud and grease seal. Available in
chrome or black finish. Fits 1936-57 Spring Forks with offset
CLASSIC
Big Twin Rockers and star hub wheel. Order brake handle,
axle kit and hub separately.
22-1083 Chrome Kit 26-2134 Early Chrome Handle
22-1084 Black Kit 26-2126 Polished Handle
44-0581 Axle Kit 26-2127 Chrome Handle 26-2126
22-0776 Black, Fin Kit 1936-48 Big Twin Dual Cam Brake Backing Plate includes
22-0780 Chrome, Fin shoes, springs and arm assembly to fit stock spring fork front
23-1250 brake drum. Order drum separately.
VT No. Finish Item
49-0852 Chrome Backing Plate Assembly
49-0853 Black Backing Plate Assembly
22-0774 Black Backing Plate and Brake Drum Kit
22-0987 Black Backing Plate, Brake Drum, Anchor Arm
and Cable Kit
23-1255 49-0464 Replacement Shoes
23-1250 13-0562 Replacement Brake Shoe Spring Set
Installed
1941-48 Big Twin Front Brake
Shoe Kit includes shoe set,
washer with square, springs,
Finned Brake Drum for 1936-48 EL and 1941-48 cam, arm, lockplate, nut, pivot
FL. Features a cast iron construction as original! pin, adjuster, and cam shim.
VT No. Finish Shoes have linings riveted as
23-1250 Chrome on original. Fits 1941-48 BT and
23-1255 Black 1941-57 G.
VT No. 49-1673
80"
45"
80" Motor All Internals

Available in our catalog
789
Big Twin Spring Fork Brake
Complete Axle Kits fit 1936-48 Big

Twin with offset stock rockers.
VT No. Finish
44-0581 Chrome
44-1983 Parkerized
49-0256
44-0300
44-0111
VT No. OEM Item 37-8941 44270-36 Shaft Washer
37-8661 534 Cotter Pin 49-0064 44308-36 Operating Arm, 1936-48 Big Twin, Parkerized
6591 Washer, 10 pk 23-1993 44402-36 Shoe Set Complete Big Twin
8163-3 7845 Cad Nut, Kit 23-1652 Replica Shoe Set Complete, BT 23-1993
37-8865 7923 Chrome Nut, each 23-1707 Shoe Set Complete, .020 Oversize
44-0307 7923 Cad Nut, each 23-0516 44433-39 Linings Only, Big Twin
37-9027 9968 Clamp Cable to Fork, Top 23-0128 44449-36 Stud and Lock Plate
2627-4 56626-37 Spark Control Coil Clamp, Parkerized 13-0209 44484-35 Shoe Springs
2628-4 9986 Front Brake Cable Handlebar Clip, Parkerized 26-2126 45002-41 Lever Assembly Polished
37-8776 9980 Front Brake Cable Clamp 26-2127 45002-41C Lever Assembly Chromed
37-9312 9980 Front Brake Cable Clamp, Chrome 44-0304 36-1994 45085-30 Brake Cable Inner/Outer 1941-57
23-1990 41691-31 Copper Cam Shim 36-2580 –– Brake Cable Housing only 1928-56
44-0085 43872-36 Front Axle, Parkerized 49-0422 45085-30 1930-57 Inner and Outer Brake Cable
44-0209 43872-36 Front Axle, Chrome Includes the following: (replica)
44-0300 43882-36 Front Axle Sleeve 45102-39 Cable Oil Cup Kit and
45109-30 Cable Ferrules 23-1707
44-0304 43884-36 Spacer, Chrome
44-0111 As Above Spacer, Parkerized 36-2567 45153-28 Inner Cable only
8162-3 43886-30 Chrome Nut Kit 49-0256 Oiler Cup
23-0974 Black Brake Drum, 1936-39 8624-2 45162-41 Cable Adjuster 1941-57
23-1770 44113-36 Black Brake Drum 23-0974 9739-2 45162-41 As Above,Chrome 37-8773
23-1771 44113-36C Chrome Brake Drum 9630-2 45162-41 As Above, Parkerized
23-3077 44146-41 Black Backing Plate 9630-2T 45162-41 As Above, Parkerized 49-0213
49-1010 4108-36 Front Backing Plate, 1936-37, Black 8938-2 45162-41 Cable Adjuster 1928-40 Cadmium
49-1015 Front Backing Plate, 1938-40, Black 9683-2 4165-28 As Above, Parkerized
23-3076 44146-41 Chrome Backing Plate 9740-2 4165-28 As Above, Chrome
49-1010 4108-36 Black Backing Plate, 1936-37 BT 49-1010 37-8773 45172-28 Lower Cable Clamp
49-1015 Black Backing Plate, 1938-40 BT 49-0213 45172-28 As Above Chrome
10-0737 44180-36 Bushing for Back Plate Big Twin 2593-5 45172-28 Lower Cable Clamp, Black
2641-3 Grease Fitting 2593-5T 45172-28 Lower Cable Clamp, Black
23-0416 44475-35 Lock Plate 22-1083 Kit Chrome Big Twin Brake Kit
8617-4 44183-36 Grease Seal Kit includes Spring 22-1084 Kit Black Big Twin Brake Kit
49-1015 49-0063 Arm, Cadmium
8617-4T 44183-36 As Above
–– 44186-36 44182-36 Gasket, Washer
15-0078 44183-36 Cork Gasket, pack of 5
Front Brake
49-2012 44223-28 Shackle Bushing, pair Drum.
49-1007 Shackle Bar, Black, 1928-30 VT No. 23-1018
49-2006 44210-40 Shackle Bar, Black 1940-48 Big Twin Springer Cable Kit
49-2011 –– Shackle Bar, Chrome 1940-48 Big Twin
includes replica outer
8010-10 44226-36 44223-28 Shackle Rebuild Kit,
44231-38 44225-30 including 2 studs, cable with oiler cup,
44229-40 44231-38 2 bushings, lock, grease inner cable, and lower
fitting and hardware. cable cinch.
23-3075 44265-36 Brake Cam, Big Twin VT No. 49-0171
790
Spring Fork Brake
26-0152 26-0541
26-0522 26-0779
Ball End Stainless Style Assembly.
26-0522 Ball End ⁵⁄₁₆” Complete
26-0152 — Polished, Screw In Type
26-0779 3/8” Hole Polished 26-0948
26-2192 — Chrome Stock Lever Only
26-0542 — Lever Clamp Strap
8819-4 45031-41 1941-64 Pin and Nut, Cadmium 26-0821
26-0947
26-0506 45033-49 1949-64 Lever Bushing with cotter
1941-64 Replica Brake Clutch Handle features accurate-
Replica Brake Cable
ly formed clamp and cadmium plated hardware. Replaces
Assembly for 1930-57
45002-41.
Spring Fork, Big Twin and
VT No. Item
45”. Includes housing with
26-0541 Lever Kit
end ferrules, oil cup kit and
26-2143 Lever Assembly, Forged
inner cable. Replaces 45085-
CLASSIC
26-0950 Lever Assembly, ⁵⁄₁₆” O.D.
30. Order clamps separately.
26-0948 Front Parking Lever, Assembly
VT No. OEM Item/Fits Year
26-0946 Lever with ratchet plate
49-0432 45085-30 Cable Housing only, 45” 1930-40
26-0947 Hardware Kit
49-0422 45085-30A Cable Assembly, 1941-57
13-0845 Spring
Big Twin and Servi-Car
26-0821 Handlebar Lever Mount
36-2567 — Inner Cable, All
26-0950 Lever Assembly, Polish, 1941-48
49-0256 45103-39 Oiler Cup
26-0951 Lever Assembly, Chrome, 1941-48
37-9027 9968 Clamp to attach to fork, All
26-0953 Lever Assembly, Polished, 1949-64, brake
37-0752 1190 Screw for Above, Parkerized
26-0954 Lever Assembly, Chrome, 1949-64, brake
37-0924 1190 As Above, Cadmium
26-0957 Lever Assembly, Polished, 1941-43, brake
37-8776 9980 Clamp to attach to bars, All
37-1423 10-24 x 3/4 Fillister Screw, Cadmium 10 pk
36-0414 37-1432 10-24 x 3/8 Hex Nut, Cadmium10 pk
49-0894
A B Ball End
1941-48 Big Twin Spring Fork Cable and Handle Kit includes 26-0581
replica style cable with oiler fitting and end ferrules, polished or
chrome handle and clamps to attach cable to bars and fork leg. 26-0583
VT No. Type Year Replica Lever Assemblies include slotted lever bushing as
36-0414 Polished 1941-48 original with small hole for brake or clutch.
36-0775 Replica 1941-48 VT No. # OEM Finish
36-0418 Chrome 1941-48 26-2127 A 45002-41 Chrome Complete
36-0775 Replica 1941-48 26-2126 A 45002-41 Polished Complete
49-0894 Chrome 1936-48 26-0583* A Parkerized *Note: Bushing is not included.
26-2258 Polished
26-2174 45017-41 Parkerized
26-0948 — Front Hand Parking
26-0510 B Ball End Polished, Lever Only
26-2134 26-0945 26-0581 B Ball End Polished, Stainless
8938-2 9683-2T
Replica Brake Lever is an authentic reproduction, complete 9740-2
as pictured for 1928-40 Spring Fork models.
VT No. OEM Item
26-2134 Chrome Complete Assembly
26-0945 Parkerized Complete, Assembly 8624-2
9739-2 9630-2
26-0958 Chrome/Parkerized
37-8775 4154-28 Screw Set Front Brake Cable Adjuster. One or two locknuts included
49-0422 depending on application.
49-0975 Parkerized Screw Set
VT No. Year/Model Finish
26-2150 4150-28 Handle only 9740-2 1928-40 All Chrome
26-2151 4153-28 Lower Clamp 8938-2 1928-40 All Cadmium
49-0422 45085-30A Cable Assembly, Replica 9683-2 1928-40 All Parkerized
36-0453 Kit, Parkerized Handle and Fork Cable 9683-2T 1928-40 All Parkerized
36-2580 4143-30C Cable Housing, Black Cotton 9739-2 1941-48 BT, 1941-57 Servi-car Chrome
36-2578 –– Cable Housing, Nickel Only 8624-2 1941-48 BT, 1941-57 Servi-car Cadmium
36-2567 –– Inner 9630-2 1941-48 BT, 1941-57 Servi-car Parkerized
49-1523 –– Pivot Screw Brake Cable Cadmium Plated Brass Coupling and
26-0949 Kit Screw and Clamp Oiler includes the dust cover 4142-30. 1930-38.
49-0975 Kit Parkerized Screws VT No. 9004-2
2958-4 Kit Hand Brake Screw Kit 791
45” Solo Brake 1930-52 45” Front Brake
45”
49-0104
49-0105
49-0239
45 Rear Brake Parts for 1941-52 Solo models.

49-0210
Rear
VT No. OEM Item 49-0520
23-1740 41401-41 Drum Complete, Black
23-1769 — Drum Complete, Chrome
23-1017 — Black Drum
49-0638 — Black Backing Plate Kit
49-0903 — Chrome Backing Plate Kit
49-1875 41647-41 Black Backing Plate Assy w/shoes
49-0520 — Chrome Backing Plate Assy w/shoes 49-0903
49-2555 41652-37 Backing Plate Only, Black
23-0760 41692-36 Brake Cam Shim
19-0010 41474-35 Sprocket Kit with Ring
19-0089 41421-35 Dust Ring only
23-1751 41806-41 Shoe Set Complete
49-1240 Kit Shoe Kit
13-0208 44486-28 Spring Set
49-1875 49-2555
23-0736 41849-41 Linings, pair 45” Front Axle and Brake Hardware fits 1930-52.
VT No. OEM Item
49-0077 4054-35 Rear Cam 9690-4 7811 Axle nuts, parkerized
49-0655 — Rear Cam, Wide 8855-4 7811 Axle nuts, cadmium
49-2574 41876-41 Pivot Stud 12-0157 8860 Balls, 50 pack
44-0533 9851 Grease Fitting, 10 pack
49-2575 44476-35 Lock Plate 37-0511 9852 90° Grease Fitting, 6 pack 44-2077
49-0914 42566-35 Bell Crank 37-9027 9968 Early Frame Mount Cable Clamp
49-0179 41925-41 Rear Arm 37-9289 9974 Lower Cable to Fork Clamp
37-8776 9980 Front Brake Cable Clamp
49-2598 41925-41 As Above, Chrome 44-2005 43617-30 Axle Sleeve
49-0104 4073-39 Front Rod, Parkerized 44-2006 43630-30 Retaining Ring, 5 pack
44-2002 43632-44 Cone Seal, 5 pack 44-2005
49-0105 4065-35 Rear Rod, Parkerized 44-2003 43635-30 Lockwasher, 5 pack
2502-12 — Clevis Pin Kit 44-2417 –– Cone Nut
49-0239 69129-37 Speedo Drive, Zinc 44-0938 –– Cone Nut
44-2077 –– Bearing Cone Set
49-0210 69129-37 Speedo Drive, Chrome 44-2007 43640-30 Left inner dirt guard
49-1146 — Speedo Drive, Parkerized 49-1963 43871-30 Axle
49-0209 67080-37 Lock Tab 2897-5 Kit Axle and Nuts
9302-2 43885-30 Nut and Oil Seal 9302-2
49-0097 — Gear 23-1751 Includes 43633-44 Retainer, chrome
49-1746 — Speedo Drive 9303-2 As Above Cadmium 49-0200
Brake Drum and Backing Plate Assembly includes 9743-2 As Above Parkerized
49-2629 49-0200 44145-41 Backing Plate 1941-52
brake drum with sprocket riveted on, backing plate, 49-0041 Chrome Backing Plate 1941-52
arm, cam, pivot stud, speedometer drive, shoes and 49-0609 Black Front Brake Backing Plate
49-0614 Chrome Front Brake Backing Plate
springs. Backing plate is assembled. Order axle kit 10-0736 44180-30 Backing Plate Bushing
and wheel lugs separately. 49-2012 44223-28 Springer Fork Brake Bushing
49-2563 44226-36 Stud
VT No. Item 44229-40 Lock Tab
44231-38 Nut
49-0960 Backing Plate Kit, Black 8010-10 44226-36 44223-28 Shackle Rebuild Kit,
49-2629 Complete Brake Kit 44231-38 included 2 studs, 2 bushings, lock,
44229-40 grease fittings, and hardware.
45” Solo Brake Rods in chrome or parkerized. 49-2604 44211-40 Shackle Bar, Black
49-0960
Chrome Parkerized OEM Year Type 49-0245 44250-29 Fitting Extension 8010-10
2637-3 –– Grease Fitting
49-2553 49-0104 4073-39 1939-52 Front 49-0211 44265-31 Brake Cam
49-0105 4065-35 1935-52 Rear 37-8941 44270-36 1936-48 Brake Cam Washer
49-0063 44307-31 Front Brake Operating Arm
49-2070 Kit Complete 49-2604 44211-40 Shackle Bar, Black 49-2563
45” Solo Front Wheel 49-0245
49-0211
37-8941
44250-29
44265-31
44270-36
Fitting Extension
Brake Cam
1936-48 Brake Cam Washer
45” Solo Front Wheel Assemblies include rim, replica original fin-
ish hub and bearings laced with stainless steel spokes. 49-0063 44307-31 Front Brake Operating Arm
49-2576 44346-29, 45 Front Brake Plate Cover Kit
VT No. Size Finish Rim Only 45" Spoke 44340-30 Black Powder Coated
52-0756 16” Chrome 52-0966 Nipple Set 44348-29
52-0757 16” Black 52-0967 includes 40 44344-29
52-0758 18” Black 52-0785 piece stainless 44342-29 49-2575
steel nipples. 49-1516 45 Front Brake Plate Cover Kit
52-0759 18” Chrome — VT No. 45-0871 Chrome
45-0877* 16” Spokes — 23-1992 44406-31 Shoe Set
44-1941 Bearing Kit — 44405-31
23-0518 44427-35 Brake Lining Only
49-1379 Shoe Kit — 49-0212 44450-35 Brake Shoe Pivot Stud
45-0922 Long Nipple 49-2575 44476-35 Locking Plate
*Note: Polished stainless steel spokes. 13-0208 44486-28 Spring Set
26-2126 45002-41 Lever Assembly Polished
49-1275 49-1277 45” Front Brake Drum/ 26-2127 45002-41C Lever Assembly Chromed
Wheel Hub available 36-1994 45085-30 Brake Cable Inner/Outer 1941-57
in black, chrome or 36-2580 –– Brake Cable Outer 1928-40 49-2576
military olive drab finish 49-0422 45085-30 1930-57 Brake Cable, Inner /Outer
Includes 45102-39 Cable Oil Cup Kit
and does not include 45085-30 Cable Ferrules 1941-57
internals. 36-2567 45153-28 Inner Cable only
49-0845 Installed VT No. Finish 8624-2 45162-41 Cable Adjuster, 1941-57
49-1275 Black 9739-2 45162-41 As Above, Chrome
45” Front Brake Plate Cover Kit. 9739-2T 45162-41 Cable Adjuster, 1941-52, Chrome
49-1277 Chrome 9630-2 45162-41 As Above, Parkerized
VT No. Item 49-1276 Olive Drab 8938-2 4165-28 Cable Adjuster 1928-40 Cadmium
49-2576 Kit 9683-2 4165-28 As Above, Parkerized
49-0519
49-0845* Olive Drab
49-1516 Kit, Chrome 9740-2 4165-28 As Above, Chrome
44-1941 Hub Internal 37-8773 45172-28 Lower Cable Clamp, Black
2637-3 Fitting Assembly Kit 49-0519 Kit Backing Plate Kit
2599-6 Stud Set 12-0128 Ball Bearings 2647-3 Shifter Rod Clevis Pin Kit
49-1311 Kit 44-0926 Grease Tube
49-1287 Hub, Black 44-0716 Axle Kit
49-0544 Washer Kit 49-1288 Hub, Chrome
49-0621 Parkerized Cover *Note: Includes internals, 49-1287 49-1288
792 49-0622 Chrome Cover axle and nuts. 23-1992
Side Valve Models
Flat Head Parts
Fit Big Twin 1930-48 45” models 1929-73.
49-0908 45” 49-0945
15-0531
45” Aluminum Head Set replaces front and rear on 1941-73. Order bolts and
washers separately. Replaces 16683-39 & 16681-39.
VT No. Compression
15-0525
49-0908 Low
15-0526
49-0945 High
15-0449 Base Gasket
BT 15-0739
Front and Rear
Aluminum Head Set
for 74” and 80” side
CLASSIC
valve models.
VT No. Fits
49-0909 49-0909 1936-48 U Head Set
15-0739 1930-35 VL Gasket 15-0515
11-1760 15-0785 15-0527
Head Set is for 74” and 80” models. This set is casted after the OE Cast Iron
Heads, which feature the squish “WR” combustion chamber. Head set accepts Complete Engine Sets For Flathead (Side Valve) Models. Order head gaskets
18mm spark plugs and stock type head bolts and washers. Primer valves are separately.
also accepted, but not included. Fits 1937-48 UL. GB No. James No. OEM Years Fits
VT No. Type 15-0531 15-0505 17026-40 1940-73 All 45” Side Valve
11-1760 Alloy 15-0515 15-0506 17027-36 1936-48 74”and 80” Side Valve
11-1779 Iron 15-0785 — 1930-36 VL
Head Primer Cups are for Flathead and OHV models and features a Early Top End Kits.
solid brass construction for exact applications or restoration. GB No. James No. Years Fits
VT No. 49-0009 15-0525 15-1182 1940-73 45
15-0527 — 1930-36 VL
Original V-Twin Replica since 1977! 15-0528 15-1183 1936-48 UL/ULH
Headbolts Head Bolts, Head Nut and Washer Kits.Flat Heads

Cadmium Chrome Parkerized Item
7709-32 — — 1932-40 45” Head bolt nut with washer
7711-18 8216-18 9727-18 74 and 80 with Aluminum Heads, order washers separately
9889-16 9888-16 — 1951-73 45” WL and G
7711-18-45 8217-18-45 9705-18-45 45” with Aluminum Heads
7712-36 — 9728-36 45, 74 and 80 with Cast Iron Heads
— — 9728-36T* For 11-1760 Cylinders Only *Note: Black Finish
— 2055-1 — 1965-73 45” Head Bolt for Alternator Mount
9728-36T — — 49-0276 45” Bolt only, 14-40MA (NOS)
Head Bolt Washer Kits
Studs for 1929-50 45” VT No. 2183-16 7710-18 8215-18 9698-18 Aluminum Flathead Washer Kit
1937-48 Big Twin Side Valve Upper and Lower Side Valve ULH Headbolt Wrench.
VT No. Type VT No. 16-0067
9522-22 Cadmium
9723-22 Parkerized Engine Case Bolt Kit includes the necessary hard-
45” Lower Only ware to bolt together the motor cases of the years
8825-16 Cadmium listed.
9626-16 Parkerized
1932-up Upper Only
9781-5 Parkerized
45 Top Motor Mount Spacers for spacing out the two longest
head bolts on aluminum head models. 1941-73.
8229-2 Chrome Acorn Chrome Cad Fits
8230-2 9721-2 Parkerized 8121-34 8122-34 8123-34 1936-39 Flathead Big Twin
8230-2 Cadmium 8124-34 8125-34 8126-34 1940-48 Flathead Big Twin
Side Valve Mount —
—
8619-17
—
8620-17
9697-17
1937-73 45’s
1937-73 45’s Parkerized
Side Valve Engine Mounts fit engines by head type cast iron or alu-
minum. Ends of mount are attached by bolts in head bolt set.
VT No. OEM # Type Fits Finish
31-0108 16851-37 A Both 1936-48 BT Zinc A B C
31-3993 16851-37 Chrome 31-3993
49-1932 2806-40 B Alum. 1936-73 45” Zinc
31-0211 16855-51 C Iron 1932-73 45” Zinc
793
Side Valve Flywheels
10-0265
10-1035 10-1013
49-0069
10-0332
Stock Replacement Rod Sets for Flathead. Includes new

rods, crank pin, nuts, cages and standard rollers. Rollers are
fitted and assembled. Piston pin bushings are installed and
honed for stock wrist pin.
V-Twin Complete Stock Flywheel Assembly is shipped com-
10-0265* 24279-37 1937-48 UL & ULH 80
plete, assembled, balanced and trued.
10-0332** 1937-48 UL, ULH 80
VT No. Year Model
49-0069 24275-32 1929-73 45” Replica
10-1035 1929-73 45” Side Valve
10-1013 1937-48 74” Side Valve
*Note: Features stepped crank pin.
Connecting Rod Race Sets made **Note: For use with 10-1027 V-Twin flywheel only.
from 52100 steel and hardened.
VT No. Model Years
10-0139 Flathead 45” 1929-54 Truett and Osborn Flywheel
10-0143 VL 1930-36 Sets feature original weight
10-0138 UL 1936-48 right and left sides.
Bare Flywheels Only
VT No. Fits
10-1049 45”
10-1027 74”& 80” Side Valve
10-1027
10-1068 K Model
Crank Pin Crank Pin Lock Kits include two

nuts, two locks and mount screws.
Nuts and locks are also available
10-0129 10-0131 10-0135 separately.
VT No. OEM Year Model Item
10-0335 Kit 1936-52 61” & 80” Kit
10-1121 10-0127 10-0336 Kit 1941-53 74” Big Twin Kit
10-0338 Kit 1929-73 45” Kit
12-0535 23966-36 1936-52 61” and 80” Eastern
Crank Pins available from Eastern, Jims and V-Twin. Pins are made of 8620 steel with .062 heat pen-
12-0602 23966-36 1936-52 61” and 80” Jims
etration. *Note: Features two oiling feed holes and can be used on 1929-52 W and 1933-73 G models. 12-0573 — 23967-41 1941-53 74” Big Twin
Model Years Jims Jims Eastern V-Twin V-Twin V-Twin V-Twin OEM 12-0520 8010 1929-73 45” Nut Set
3 Hole 1 Hole 3 Hole 2 Hole 1 Hole 1 Hole 3 Hole
74 OHV 1941-80 10-8356 — 10-0129 10-0135 — — — 23961-41
Sifton Steel Rod Cage Set includes 4
Big Twin 1940-52 — 10-8363 10-0131 — — — 10-1450* — cages and standard Torrington Roller Set.
UL *Note: VT No. Type Year Size
(Step .010 O/S
Pin) 10-2522 Big Twin 1936-85 Standard
K Model 1952-53 10-0132 — 10-8371 — — — — 23960-52 49-0058 45” 1929-73 Cage Set
45’s 1937-73 — — 10-0365 — 10-0127* 10-1121 — 23960-29 10-1801 45” 1928-73 .0008
45” WR 1941-52 — — 10-0381 — — — — —
10-8753 45” WR 1936-53 Cage Set
10-0940 10-0940 WR 1929-73 Kit
10-1297 WR Roller Set
Bronze Wrist Pin Bushings, pairs. Fits SV Big Twin.

VT No. OEM Year U/M
10-0756 24334-36 1936-48 Standard
10-0757 — 1936-48 .002 Steel Crank Pin Flywheel Washers sold in pairs.
10-0758 — 1936-48 .005 Inside OEM Year Model Size
10-0759 24335-36 1936-48 .010 10-1284 23972-36 1936-52 Big Twin 61” OHV Standard
10-0760 24331-36 1930-73 Standard 1937-48 Big Twin Side Valve 74” and 80”
10-1217 77972-21 As Above .005
794 10-1162 23972-21 1929-73 45” Side Valve Standard
Side Valve Case Races
10-0211 10-0209 10-0224
1929-73 45” Models

1936-47 OHV, 1930-48 Side Valve 74 and 80” Case Races.
Note: VT No. 10-2498 is a bronze bushing.
Jims VT No. OEM Years Side Size
— 10-2498 413-30 1930-36 Right Standard
— 10-0226* 413-36 1936-39 Right Standard
— 10-0228* 416-36 1936-39 Left Standard
45” Engine Components for 1929-73.
— 10-2521* — 1936-39 Left .002
VT No. OEM Item
12-0560 7974 Shaft Nuts, 5 pack 10-0257 10-0224 24595-40 1940-48 Right Standard
10-0337 8010A Crank Pin Nut Kit 10-0258 — 24597-40 1940-48 Right .005
10-1162 23972-21 Inside FW Washer, 2 pack 10-0235 10-0208 24621-40 1940-54 Left Standard
17-0922 23982-12 Crank Pin Lock, 10 pack — 10-0209 24623-40 1940-54 Left .005
12-0200 23985-12 Shaft Key, 10 pack — 10-0210 — 1940-54 Left .010
CLASSIC
12-0201 23985-18 Crank Pin Key, 10 pack — 10-0211 — 1940-54 Left .015
10-0417 24000-29 Sprocket Shaft
*Note: Fits 1937-39 Big Twins, 1936 Overhead Valve
10-0406 24005-37 Gear Shaft
17-0929 24016-29 Shaft Nut Lock 10-0221 10-0218
10-1161 24060-26 Flywheel Washer Set
10-0218 24585-39 Right Case Race Standard
10-0219 24585-OS .002 As Above
10-0220 24585-OS .005 As Above Case Race machined & ground to factory specifications.
10-0221 24610-39 Left Case Race Sprocket Left Side Case Race
10-0222 24610-OS .002 Jims Eastern OEM Size Year/Model
10-1165 24691-39 Left Side Washer, 5 pack 10-0238 10-0221 24610-39 Standard 1939-73 45”
10-1166 24692-39 Right Side Washer, 5 pack
12-0975 24701-39 Right and Left Retainer, 10 pack — 10-0222 24611-39 .002 1939-73 45”
10-0430 24775-39 Left Oil Slinger, each 10-0239 — 24612-39 .005 1939-73 45”
CASE ROLLERS Pinion Right Side Case Race
1937-48 SV Big Twin Right Side replaces 9261, 12 per set. 10-0255 10-0218 24585-39 Standard 1939-73 45”
Size 12-Piece 100 Pack OEM — 10-0219 24586-39 .002 1939-73 45”
Standard 10-0307 — 9261 10-0307
.0002 10-0308 — 9262 10-0256 10-0220 24587-39 .005 1939-73 45”
.0004 10-0309 — 9263
.0006 10-0310 12-4526 9264 12-0400 12-0404 12-0401
45” Right Crankcase Rollers, 12 piece.
Standard 12-4573 — 9241
.0002 12-4602 — 9242 All Rollers by
.0004 12-4575 12-4595 9243
.0006 12-4574 12-4594 9244 TORRINGTON®
.001 12-4604 12-4605 9246
45” Left Crankcase Rollers, 24 set for 1924-73. 12-0413 12-0414 12-0424
Standard 12-4500 — 9321
.0008 — — 9325
.001 12-4598 — 9326
1940-54 Big Twin Left Side Case Rollers, 24 per set.
Size 24-Piece 100 Pack OEM Steel Roller Retainer Cages.
Standard 10-0300 — 9220
.0002 10-0301 — 9221 VT No. OEM Application U/M
.0004 10-0302 — 9222 Rod
.0006 10-0303 — 9223 12-0404 24366-51 74 and 80 4
.0008 10-0304 — 9224
12-0412 24366-51 As Above, Jims 4
.001 10-0305 — 9225
Bulk Pack Rod Rollers 49-0058 45” SV 4
1929-73 45” Flathead 12-4616 45” Roller Set 24 pc
Size Long OEM Short OEM 12-1941 .0008 45” SV Roller Kit
Standard — 9241 12-4599 9301
.0002 12-4503 9242 — 9302
Big Twin Right Pinion
.0004 12-4595 9243 — 9303 12-0400 24646-36 1936-54 BT 2
.0006 12-4594 9244 12-4600 9304 12-0413 24646-36 As Above, Sifton 2
.001 12-4605 9246 — 9306 12-0429 24646-36 Rowe Brand 2
VT No. 12-4616 is a set of long and short
45” Engine Plaque Big Twin Left Side Sprocket
VT No. 48-1824 12-0401 24721-30 1930-54 BT 2
12-0414 24721-30 As Above, Sifton 2
45” Left Sprocket
12-0424 24720-29 1929-73 BT
795
SV Pinion Hardware 10-1937 10-0841
Replica ULH Cam Cover includes bushings

installed, features smooth natural finish. As used
on 74 and 80 cubic inch 1937-40 ULH.
VT No. Item
10-1937 Cover Only
10-0841 Kit
10-0950 Cover with installation kit
1930-36 Big Twin and 45” Timer
and Cam Bushings.
VT No. OEM Fits
10-8524 10-8524 662-29 Timer Shaft
10-8525 662-30 Cam Gear Shaft
10-8526 662-34 Oiler Drive Shaft
VL Cam Shims for 1930-
36.
VT No. OEM Size
1937-73 45” & 1937-48 UL-ULH 10-8521 663-26 ¹⁄₆₄”
10-8515 664-26 ¹⁄₃₂”
45” SV Big Twin SV OEM # Item 45” SV Big Twin SV OEM # Item
12-1175 12-1175 271 1 Bushing Pin 10-2976 — Set Cam Set, 4 pieces
12-1185 12-1185 327 2 Gen Gear Pin 10-8379 10-8380 Kit Bushing KIt
12-1173 12-1173 333 3 Strainer Pin 10-0709 10-0709 25586-37 20 Cam Gear Cover Bushing
— 12-1166 377 4 Dowel Pin 10-2540 10-2540 As Above .005 Oversize
9668-19 9621-12 2341 5 Cam Cover Screw, parkerized 10-0731 10-0731 25588-37 21 Cam Gear Cover Bushing
9413-19 8140-12 2341 Cam Cover Screw, cadmium 10-2507 10-2507 25590-37 22 Cam Gear Cover Bushing
9412-19 8149-12 2341 Cam Cover Screw, chrome — 10-2512 25591-37 23 Pinion Bushing
9985-24 9985-24 6150W 6 Adjuster Washer 10-2503 — 25593-37 24 Pinion Bushing
37-0737 37-0737 6182 7 Adjuster Washer 10-2506 — 25595-37 25 Cam Gear Cover Bushing
14-0154 14-0154 6440 8 Oil Switch Washer — 10-2504 25599-37 26 Cam Gear Cover Bushing
12-0705 12-0705 6769 9 Shim 10-2495 — 25601-37A 26 Cam Gear Cover Bushing
— 12-1474 24010-37 10 Pinion Gear — 12-1475 25775-37 27 Idler Gear
12-1473 — 24011-37 10 Pinion Gear 12-1259 — 25776-37 27 Idler Gear
12-1526 — 24696-39 11 Seal Ring 10-0716 10-0716 25785-30A 28 Idler Gear Bushing
— 12-1527 24696-40 11 Seal Ring 12-0197 12-0197 25794-30 29 Idler Gear Stud Screw
13-0105 — 24699-37 12 Pinion Spring 12-0915 12-0915 25810-15 30 Idler Gear Retaining Ring
— 13-9202 24700-37 12 Pinion Spring 49-1016 10-0805 10-0805 25788-30 31 Idler Gear Stud
12-1424 12-1424 24912-37 13 Relief Pipe 10-0806 10-0806 Kit 31/28 Stud and Bushing Kit
15-0334 15-0277 24921-37 14 Relief Pipe Gasket 15-0217 15-0217 25811-11 32 Idler Washer
12-1512 12-1512 24975-37 15 Oil Strainer — 12-0419 25851-37 33 Circuit Breaker Drive Gear
15-0879 — 25226-37 16 Cam Cover Gasket 12-1404 12-1404 26383-32 34 Adjuster Screw
— 15-0407 25227-37 16 Cam Cover Gasket 12-1401 12-1401 26550-38A 35 Oil Pressure Switch
13-0106 13-0106 25287-37 17 Breather Spring 32-0550 32-0550 31071-37 36 Generator Drive Gear
49-0654 49-0654 25281-37 17A Seal Ring Plate 7612-3 7612-3 63533-15 37 Oil Fitting, Cadmium
49-1016 49-1016 Kit Breather Kit 7612-3T 7612-3T 63533-15 37 Oil Fitting, Cadmium
— 12-1378 25302-37 18 Oil Pump Drive Gear 40-0514 40-0514 63593-15 37 Oil Fitting, Chrome
12-0421 — 26318-37 18 Oil Pump Drive Gear
49-2562 49-2562 25350-37 19 Breather Valve
Valve Covers
Valve Spring Cover Set Screw type. Use on all 1930-38
Flathead. Set of four.
VT No. Year/Model Type 49-0119
49-0119 1930-36 VL Zinc Set
49-0113 1930-36 VL Zinc Set
49-0192 1937-38 UL Zinc Set 49-0938 49-0700
14-0173 1930-38 VL and UL Seal for Above
2886-24 1937-38 UL Cadmium 45” Valve Cover Sets for 1929-73.
2885-24 1930-36 VL Cadmium VT No. Item Finish
49-0938 45” Kit Complete Set (Less Seals) Zinc
49-0700 45” Kit Complete Set (Less Seals) Chrome
Late ULH Valve Cover Set includes 4 sets of all 2722-20 45” Set Parkerized
parts shown, for 1939-48 UL-ULH models. 2642-20 1942-73 Set Cadmium
VT No. OEM U/M Item/Finish/Use 2717-20 1942-73 Set Cadmium
49-1965 18236-39 4 Complete, Chrome 2887-20 1930 Set Cadmium
49-0967 18236-39 4 Complete, Zinc
49-0961 18254-39 4 Clips, Chrome VT No. OEM Item U/M
14-0785 Seals Kit 8 14-0785
49-0962 18254-39 4 Clips, Zinc
49-0963 18248-39 4 Locks, Zinc 15-0255 18630-26 Washer 10
49-2580 18258-39 4 Retainers, Zinc 14-0170 18260-29 Flat Seal Ring 5
13-0103 18247-39 4 Springs 14-0621 18260-29 Flat Seal Ring (James) 5
15-0281 18245-39 10 Cork Gasket, Upper 14-0510 11123 O-Ring 10
49-1968 18246-39 4 Cork Retainer, Upper 15-0256 18198-38 Guide Seal 2
15-0282 18257-39 10 Cork Gasket, Mid
49-0961 15-0283 18259-39 10 Gasket, Lower
3066-36 1939-48 Valve Cover Set
3093-12 Seal Valve Cover Seal Set
796
SV Pinion-Sprocket Shafts
10-0410 10-0433 10-0456 10-0475
Pinion Shafts
Side Valve Year OEM Jims Eastern V-Twin Motor Shop
45” 1929-73 24005-37 10-0406 10-0449 10-0433
Big Twin UL 1937-48 24006-37 10-8331 10-0407
F, J, JD 1915-28 355-15
VL 1930-36 355-30 15-0382
Gasket
W, K, XLR All 24005-67R
XR 750 All 24007-69R 10-0392 10-0392
Sprocket Shafts
Big Twin 61” & 74” 1930-54 24001-30 10-8314 10-0410 10-0456 10-0469
10-0417 10-0437 10-0479 10-0475
CLASSIC
45” 1929-73 24000-29
Early Twin 1925-29 352-25 10-0397
Pinion Shaft Nut with

Pinion
taper end, 5 pack. 10-2535 10-1204 10-1206
VT No. OEM Fits
12-0532 24023-36 1936-81 Big Twin
12-0560 7974 1923-73 45”
Pinion Bearing Sets for right side includes rollers and cages.
Lock Plate, Pinion Shaft Nut, 10 pack. Washers and snap rings included when required except where
*noted.
VT No. OEM Fits VT No. Year Model
17-0913 24015-36 1936-80 Big Twin 10-2535 1936-54 Big Twin 74 & 80
17-0929 24016-29 1929-73 45” 10-1204* 1929-73 45” Standard
Taper Pinion Keys sold in ten packs. Fits 10-1206 1937-73 45” .002”
1941-81 Big Twin, 1929-73 45”, replaces Side Valve Pinion Kit includes
OEM 23985-12. parts for the years of application.
VT No. 12-0200 VT No. Fits Model
12-0103 12-0107 12-0103 1937-73 All 45”
Engine Sprocket Nut Kit for 1930-54 Big Twin
includes correct nut, key retaining ring and left 12-0107 1940-48 74” & 80”
Pinion Shaft Seal Ring.
bearing oil slinger. VT No. OEM Year Model
VT No. 12-0620 12-1526 24696-39 1937-73 45” Twins
12-1527 24696-40 1940-48 74” and 80” Side Valve
Sprocket
12-0409 12-0410 Sprocket Shaft Taper End Nut. 5 pack.
12-0560 7974 1929-73 45” Side Valve
12-0532 24023-36 1936-71 Big Twin 12-0532
Motor Sprocket Nut Kit includes correct nut,
key retaining ring and left bearing oil slinger.
VT No. Fits
12-0620 1941-54 Big Twin
12-0619 1929-73 45”
Left Sprocket Shaft Bearing & Hardware Kit includes loose
Left Bearing End Oil Slinger.
rollers, cages and end slinger.
VT No. Year Model 10-0429
10-0430 24775-39 1939-73 45”
12-0409 1941-54 Big Twin
10-0429 24776-40 1941-54 Big Twin
12-0410 1929-73 45”
12-0501 12-0503 Nuts, Motor Sprocket
VT No. OEM Fits Years
12-0501 7991 45” 1929-73
7411-2 8211-2
12-0503 24003-30 Big Twin & 61 1930-54
Engine Sprocket Kit includes 23 tooth sprocket,
nut, key, dust seal. Parkerized BT 1936-48. Sprocket Shaft Seal and Snap Ring.
VT No. 19-0137 VT No. OEM Year Model
7411-2 24776-40 1936-54 61”-74”-80”
8211-2 24775-39 1939-73 45” Model
797
Cam Sets
Watch on YouTube!
https://www.youtube.com/
watch?v=NXO0E7eLxS0
49-8554 10-2982
Unilite Distributor with billet aluminum housing is

Replica Cam Sets by Sifton (with original manufacturer specs). a dual fire type, includes gear and features 12 volt
VT No. Type Year 10-1819 electronic performance. The electronic ignition mod-
ule fits inside distributor, so no external box. Fits
10-8183 WLDR 1936-52 Cam Set
1930-73. VT No. 32-0174
10-2976 45” 1936-73 Accel Electronic Advance Distributor with rev
49-8554 WR 1936-73 limiting for 1930-52 45, 1936-47 Side Valve Big
10-1819 WR VT, As Above Twin and 1952-70 XL models. Features adjustable
10-2982 ULH 1937-48 electronic advance curves, single or dual fire modes
10-2975 UL 80” Andrews and CNC machined billet housing. Use with a 3 ohm
10-2981 Side Valve Shafts coil. VT No. 32-7804
Distributor Hold Down Clamp fits 1957-70 XL and SV
10-1804 W 1937-1952 Camshaft Lobe Set
1936-73. VT No. 31-3966
12-1547 Ball Bearings WR Conversions
Side Valve Oil Pump Parts

Side Valve Scavenger Pump Parts
49-0645
VT No. OEM Item
49-0645 Complete Scavenger Pump, Silver
49-0836 Cover Scavenger, Pumpj
9408-22 Chrome Bolt Kit
9409-22 Cadmium Bolt Kit
49-0606 N 9663-22 Parkerized Bolt Kit
12-1378 25302-37 Breather Spiral Gear
N 15-0649 26246-37 Gasket
12-1257 26331-37 Scavenger Gear
12-0110 12-0204 26340-36 Key
12-1378
45 Feed Pump Parts for 1937-73. 12-0214 26341-37 Key Halves
VT No. OEM # Item 12-0153 26343-39 Screen
49-0606 Complete Pump Assembly (N) 12-1465 23383-32 Oil Adjusting Screw Kit
49-0639 Feed Pump 12-1446 26218-37 Body Only
12-1478 Kit A, M, J, K, I 12-1504 Kit Rebuild Kit
12-0110 Kit Complete Speed Pump Assembly Kit 12-1505 Kit Rebuild Kit
12-0158 8816 A Balls (25) 49-0836
9408-22 Chrome B 45’s 1937-73 Bolt & Nut Kit Breather Screen replaces 26343-39 on SV’s.
9409-22 Cadmium B 45’s 1937-73 Bolt & Nut Kit VT No. 12-0153
9663-22 Parkerized B 45’s 1937-73 Bolt & Nut Kit
12-0421 26318-37 D Oil Pump Drive Gear
12-1442 26284-37 F Vane, pair
13-0161 26286-37 G Spring, Vane
49-0094 Upgrade Vane Holder 12-1476 8111-12
8719-1 8721-1 9631-1
9523-1 26362-36 H Check Valve Plug, Chrome
9524-1 26362-36 As Above, Cadmium A-Long Oil Pump Nut with ¼-24 thread for 1941-48 74 and 80
9525-1 26362-36 As Above, Parkerized SV, 1941-54 45’s.
13-0114 26363-56 I Check Valve Spring VT No. Finish
12-1444 26369-41 J Adjust Screw 8719-1 Chrome
12-1476 26383-32 J Replica Screw 8721-1 Cadmium
13-0160 26373-41 K By-Pass Spring 9631-1 Parkerized
15-1185 — Gasket Kit B-Standard ¼ x 24 Hex Nut
Oil Strainer fits 1937-73 Flatheads. Kit includes VT No. Qty Finish
strainer, gasket and pin. 8110-12 12 Chrome
VT No. OEM Item 8111-12 12 Cadmium
9673-12 6 Parkerized 8110-12 9673-12
12-1542 Kit
12-1512 24975-37 Oil Strainer Oil Pump Adjusting Screw Kit fits BT and
Oil Strainer 12-1173 333 Pin, 10 pack Side Valve, include screw, shims and washer.
15-0214 24973-57 Gasket, 10 pack VT No. 12-1465
Flathead Relief Pipe replaces 24912-37 on Oil Pump Not 1937-73 Side Valve Feed
1937-52 45’s and 1937-48 Big Twin Side Valve. Included. Pump By Pass and Check
VT No. 12-1424 Valve Kit includes (3)
Oil Pump Fitting replaces stripped or springs, (3) caps, (3) balls
broken fitting in cast iron SV feed or and a check valve.
scavenge pumps fittings has ⁷⁄₁₆” UNF VT No. 12-1478
thread with internal hex for installation.
VT No. 40-0512
798
11-0404
Side Valve Piston Kits
V-Twin Piston Kits include 2 Cast Alloy Pistons, Ring Set,

2 Wrist Pins and 4 Circlips. All Flathead Pistons have a steel 49-0685 49-0686
expansion control strut cast as original. All 74/80” Flat Heads
have steel expansion strut as original. Big Twin Side Valve Cylinder
Sets are available to fit both
Flathead Piston Kits.
Flathead 45” SV 74” SV 80” SV
74” and 80” side valve motors.
Size ³⁄₃₂” Top 3⁵⁄₁₆” Bore 3⁷⁄₁₆” Bore Sold in sets only. These cast
STD 11-0400 11-0415 11-0408 iron cylinders are ready to be
.010 11-0401 11-0416 11-0409 fitted with pistons. Thirteen fin
.020 11-0402 11-0417 11-0410 11-1757 style cylinders that have valve
.030 — 11-0418 11-0411
.040 11-0404 11-0419 11-0412
guides and intake manifold
.050 11-0405 11-0420 11-0413 nipples installed. Kit includes
.060 11-0406 11-0421 11-0414 standard piston kit pre-fitted to
.070 — 11-0422 11-0424 cylinder bore size.
CLASSIC
.080 — 11-0423 11-0425
Set Kit Size Type
Ring Sets 49-0685 49-1385
11-1757 11-1305
74” Iron
74” Aluminum
49-0686 49-1386 80” Iron
45” Hastings Ring Sets.
Model 45” & 55” 45” 45” Top End Kit
1952-73 G & K 1937-52 G & W includes 45 valve cover
Comp Ring 2³⁄₄” 2³⁄₄” kit, 45 lifter kit, valve
¹⁄₁₆” ³⁄₃₂” spring kit, front & rear
Oil Ring
³⁄₁₆” ¹⁄₈”
45 cylinder, 2 Sifton
Mfg.# 4244 5044*
intake valves, 2 Sifton
Standard 11-0144 11-2529
exhaust valves, high
.010 11-0145 11-2530
.020 11-0146 11-2531
compression head,
.030 11-0147 11-2532 gasket kit, headbolt kit,
.040 11-0148 11-2533 and washer kit.
.050 — 11-2534 VT No. 49-0865
.060 11-0150 —
.070 11-0151 11-2536
*Note: Features One Piece Oil Control Ring 49-0378
One Piece Cast Iron Ring Sets for 2 pis-
tons with one piece oil ring.
Model 45 SV 74” SV 80” SV 49-0193
Comp 2.745” 3⁵⁄₁₆ 3⁷⁄₁₆”
11-2561 Ring ¹⁄₁₆” ³⁄₃₂” ¹⁄₁₆” Replica 45 Cylinder Sets include front and rear cylinders.
Oil Ring ³⁄₁₆” ³⁄₁₆” ⁵⁄₃₂” 49-0378 WL includes pistons and rings.
Standard — 11-2537 11-2545 VT No. Fits Item
.010 11-2561 11-2538 11-2546 49-0193 W Front
.020 11-2562 11-2539 11-2547 49-0804 Rear
.030 — 11-2540 — 49-0378 Set 1929-52 WL
.040 11-2564 11-2541 — 11-0637 Set Piston Set
.050 11-2565 11-2542 — 49-1850 Top End Assy
.060 11-2566 11-2543 11-2551 11-0379 OE Piston Kit 49-0804
45” Engine Plaque .070 11-2567 11-2544 11-2552
VT No. 48-1824 .080 — 11-2553 11-2554
B
Wrist Pin and Lock Kits.
Cylinder Base Nuts include washers. A
49-7606 22775-36 1936-48 Big Twin SV
Chrome Cadmium Parkerized Fits
49-7608 .002 Oversize 1932-51 45 SV
7017-16 1936-78 Big Twin, Acorn (A)
49-7606 11-0869 22719-52 1952-73 45 SV
8104-16 8105-16 9623-16 1936-78 Big Twin (B)
8106-16 8107-16 9624-16 45’s (B)
9715-8 8171-8 9716-8 ⁷⁄₁₆” Lockwashers (B), 8 pack
Cylinder Base Studs feature heat treating and interfer-
12-0911 ence thread at cylinder base. Sets of eight.
12-0910
VT No. OEM Year Fits
Wrist Pin Locks, 10 packs. 8856-8 16831-30 1930-77 74” and 80”
12-0910 22581-32 1932-53 All Twins 12-2100 16831-30 1930-77 74” and 80”
12-0911 22582-52 1952-77 All Twins 12-1192 16830-29 1929-73 45”
799
Side Valve Valves and Guides
Valves 10-0675 10-0369
Model and Year Type OEM Steel
VL-74 Intake 163-30 11-9647
VL-74 Exhaust 165-30 11-9648
UL-ULH-74 & 80 Intake 18070-37 11-0600
1937-48 Exhaust 18082-37 11-0611
11-0600 45 cubic inch Intake 18070-32 11-0601
Cast Iron Guides

Model and Year Intake Exhaust UL Tappet Assembly and Base Kit includes 4 tappet assem-
45” Flathead 1929-73 blies with adjuster screws, mount screw kit and gaskets.
Standard 11-0792 11-0792 VT No. Item
+.002 11-0822 11-0822 10-0675 Assembly and Base Kit
+.004 11-0823 11-0823 10-0369 Tappet Set Only
+.005 11-0853 11-0853 49-0850
+.010 11-0854 11-0854
11-0792 UL & ULH Flathead 74” & 80”
Standard 11-0793 11-0793 49-8552
+.002 11-0825 11-0825
Tappet Set with lifter bases fits 1929-73 45’s.
GB Valve Guide Gaskets, 20 pack. Replaces
VT No. Type
18198-38. Fits Side Valve/1929-73.
49-0850 Stock
VT No. 15-0256
49-8552 WR
13-9190 49-0797
49-0793
45 and Big Twin Side Valve Steel Lifter Base.
VT No. Fits Type Qty
49-0793 Front Thread Set
49-0797 Rear Thread Set
9622-16 Screw Parkerized Set
8103-16 Screw Cadmium Set
8102-16 Screw Chrome Set
Valve Spring Kits include all springs, collars and keepers nec- Side Valve Tappet Assemblies to fit 45,
10-0567 UL and K-Model Side Valves. Include roller
essary for each application.
VT No. Model Year Item assembly installed. Choose Jims or Sifton
13-9188 45” 1932-40 Kit “Lightning brand”. Jims does not include
13-9189 45” 1941-73 Kit adjuster screws or nuts where necessary.
13-9190 74-VL 1930-36 Kit Replaces 18490-29.10-0567 does not include screws.
13-9191 74 and 80 1937-48 Kit Big Axle Standard
UL-ULH Jims Sifton Size U/M
11-0657 UL 1930-48 Collar Kit Only — 10-0567 Standard Set
— 10-0506 Standard Each
10-0652 10-0507 .005 Each
— 10-0528 .010 Each
— 10-0989 .005 Set
— 10-0990 .010 Set
VT No. 49-1679
1930-73 Side Valve Tappet Adjuster
Screw Kit for Flathead includes 4
screws and 4 matching lock nuts.
VT No. OEM Item
Valve Spring Sets Only, Set of 4 10-0543 Kit V-Twin
VT No. Model Year 12-0523 18570-38 Nut (10)
13-9153 Big Twin Side Valve 1930-48 10-0519 18556-40 Screw (4)
10-0543
13-9155 45 Side Valve 1941-73 2779-8 Kit Colony
13-9214 45 Side Valve 1930-40 10-0519 18556-40 Screw (4)
13-0190 WR Heavy 1937-52 Tappet Roller Repair Kit includes
4 pins and 4 roller assemblies. Use
tool VT No. 16-0874 for accurate
removal and reassembly.
VT No. Type
10-0520 18534-29A, 1929-84
12-1179 Pins Only, 10 pack
800
Case
10-0991
80” Flathead Engine includes all new components including

replica engine cases, smooth cam cover, “squish” high com-
CLASSIC
pression heads, V-Twin flywheel assembly and cams. Includes
all new components including replica engine cases, smooth
cam cover, high compression heads, V-Twin flywheel assembly
and cams. Features cylinders, bored and honed with fitted 80”
UL standard pistons and rings. Heat treated exhaust and intake
valves in are provided. The combustion chamber is the updated
high compression 6:1 design and shape. 10-0879
VT No. 10-1942
Bolt Kits 10-0953
Chrome Cadmium
Stock Style Hardware Kit contains all the stock engine nuts,
bolts, washers and studs for your engine in choice of chrome or
cadmium plating. Kit includes primary cover screws, lifter base
screws, circuit breaker screws, case studs and nuts, timing plug,
cam cover screws, cylinder base nuts and washers, oil pump
nuts and bolts, trans side cover nuts and washers, transmission
top screws, transmission fill plug, generator screws, head bolts
and washers. For 1948-64 Panhead Kits, order proper length
Panhead cover screws separately.
Chrome Cadmium Year Model
8304 CHR 8304 CAD 1936-39 74 and 80 Side Valve with 10-0343
Cast Iron Heads
8308 CHR 8308 CAD 1937-73 45 with Cast Iron Heads
8309 CAD 1937-73 45 with Aluminum Head
8300 CAD 1936-39 EL
8301 CHR 8301 CHR 1941-81 FL
10-0344
Left Cases are without serial numbers.

VT No. OEM Fits
10-0991 406-37A WL
10-0879 24536-37 UL
10-1947 10-0953 Set UL
10-0343 Cam Cover UL
10-0344 Cam Cover ULH
10-1947 Cam Cover WR
10-1946 Cam Cover W
801
45” Fender
Note: All Items Shipped with a Raw Finish may have some
oxidation (rust on surface)!
50-0144 50-0778
50-0771 50-0772
45” Military Fenders are skirtless Army style of 1940’s for 45” Solo
models with Spring Forks 1937-52.
VT No. OEM Type
50-0771 3710-41A Rear
50-0772 3702-41 Front
50-0750
50-0454
50-0141 50-0179 31-1342

50-0523
Spring Fork Front Fenders are 7½” wide for 16” or 18” wheels
with riveted on wide braces. The 45” type fits with rockers inside
50-1053
the fork. Big Twin fits with outside rockers.
VT No. Year/Model
50-0144 1936-48 Big Twin
50-0750 1936-46 Big Twin
50-0778 1936-52 45”
50-1159 50-0454 1936-52 45”
45” Solo Fender. 50-0523 1949-52 45”
VT No. Item 50-0643 1934-35 VL
50-0141 1936-52 with Narrow Braces 50-0463 1934-35 DL
50-0179 1936-52 with Narrow Braces 31-1342 1930-35 Brace
50-0168 1936-52 Skirt Set Only 50-1595 1926-29 JD, Note: Body without brackets
50-1053 1949-57 only
Early Mud Flap replaces 59235-26 in
50-1159 1936-52 Bobbed
50-0771 Army Rear rubber with laminated cloth construction.
Rigid Rear Fender VT No. Item
50-0931 Hinge and Pin 28-2249
Mounting Kit includes
37-8840 Pin hardware to install rear
28-2249 Mud Flap
50-0557 Rear Brace V fender on 1929-52 45’s. 49-0425 Mount Hardware
50-1207 Fender Pieces 45 Solo Finish
9791-15 Cadmium
31-1017 Fender Clip (2) 50-0168 9790-15 Chrome
51-0865 Rear Brace 9792-15 Parkerized
50-0914 Stainless Fender Trim for 1939-48
Big Twin and 45”, 1940-49 Spring
fork front Includes clips.
VT No. Fits
50-0914 Front 45 WL Raw Tank for 45 models includes the threaded cap.
37-8458 Clips, 25 pack Steel oil tank features a raw oiled finish. Tank accepts rubber hose
and fittings for installation. In order to install the oil tank on 1936-52
37-6368 37-6369 37-6370 WL models, the battery box mount tab must be removed first. Fastens
to seat post tube and frame fender mount. Tanks also uses Big Twin
screw in cap without the dip stick. Tank features cut out on the left side
for spark coil and threaded inserts for the feed, vent, return and drain.
The right side features the side fill. The left side has 2 studs to mount
Replacement Fender Rivets fit all FL front and rear fenders the ignition coil, no need to remove original battery box mount! Oil tank
and FX front fenders, pack of 25. clamps to center position on 45 W and G models by mounting to clutch
VT No. Fits
cable bracket and the rear fender mount. Tank will accept a 12 Volt bat-
37-6368 Big Twin Fender Brace tery, battery box tab must be removed for installation. Tank has 1/8”NPT
37-6369 Big Twin Fender Top female fittings to accept rubber lines. Installation of original steel type
37-6370 FX Front, 1973-up Stainless oil lines requires fabrication to custom specifications. Order connector
Front Fender Brace Tab Set attaches the lower fender brace to the fittings separate.
fender for added support and features a raw finish. VT No. Finish
Installed by spot welding. VT No. 31-1541 40-0964 Raw
40-1006 Chrome
802
45 Gas and Oil Tanks
38-7009 38-0198
Viton Tip
Fuel Shut Off Rod Kits. 38-6653 1941-65 Stock

VT No. Fits Type 38-1135 1950-65 Stock
38-7009 1941-49 Stock
38-0198 1950-57 Stock 38-0417 Rod Only Viton
38-0971 1941-49 Viton 35-0291 Viton Tip
45 Gas Oil Cap Set fits 1936-73

models, oil cap says “OIL”
38-0594 VT No. Item
38-0114
38-7018 38-7018 Chrome Cap Set
38-0762 Black Cap Set
38-0967 37-41 Cap Set
49-0108 Oil Only
49-1666 Oil Tag
CLASSIC
Gas Valve Shut Off Tool
16-0182
replaces 96365-42 to correct
alignment of bottom and top
16-0615 holes of 1940-65 gas tanks.
VT No. Item
16-0615 OE Style
16-0182 Shop
Top of Tank Screw and Washer Kit
38-0860 mount tank to frame on 1918-36 45’s.
Includes paper gasket to avoid paint
45 Gas/Oil Tank Sets.
chipping.
VT No. Year Dash Fuel Trim Mount Shifter Gate
VT No. Item
38-0114 1940-46 Short Rod Without Early
8821-18 Nickel Plated
38-0595 1940-46 Short Rod With Early
8822-18 Cadmium Plated
38-0860 1947-73 Long Rod With Late 49-1432
49-1432 Tank Panel Inserts
38-0594 1947-73 Long Petcock Without Late
38-0576 1947-73 Long Rod Without Late 45 Solo and Servi-Car Gas/Oil Tank Mount Bolt Kits
includes washers, studs, bolts and nuts.
38-0497 38-0492 Chrome Parkerized
9894-12 9896-12
49-1777 49-1666
49-2526
45 Tank Filler Strip replaces 3502-37B on 45’s and Servi-
Car 1937-1973.
VT No. Item
49-0121 Zinc
38-0480 38-0480 49-2526 Chrome
49-1666 Oil Tank Emblem
49-1777 WR Panel
Oil Dip Stick replaces 62631-37 on all 45’s
1937-73.VT No. 49-0084
Gas Tank Mount Kit includes
Bottom 3 tank mounts, brackets, shifter
WR Gas Tank Sets, Gas both sides without dash cut out. Fit tube, 2 bayonet filler bings, lower
1937-52 W and 1937-73 G.\ threaded fitting insert, right side
VT No. Item fuel nipple and top threaded
38-0497 2.5 Gallon insert for the fuel rod. Fits 1941-
38-0492 3 Gallon 52 W, 1941-73 G.
38-0480 5 Gallon VT No. 38-1645
38-0973 Rubber Mount Tab Set 45 Shifter Gate
40-0689 Line Kit VT No. Speed Fits Pattern
49-0074 3 1947-52 W 32N1
49-0111 3 & R 1947-73 G 32N1R
*Note: All tanks with shut off rod provisions may require fuel rod alignment 21-0893 3 1937-46 W Brass
before installation of shut off assembly.
49-0074 49-0111
803
Carburetor Mikuni Carb
34mm Flatside 49-0207
Carb Kit with choke 35-0107
mechanism, 3 bolt
manifold, adapter,
cable and a twist grip 34-0534
set. VT No. 35-1708
45 Mikuni Carburetor Kit includes 34mm Mikuni carb, adapter

flange to fit 1936-52 Stock Manifold 27024-36, Anderson style
34 mm Carb Only
VT No. 35-0841
1” twist grip assembly, air cleaner and cable. Order VT No.
35-0841 49-0207 manifold separately.
VT No. Item
35-0107 Carburetor Complete Kit
49-0207 Replica Manifold
Throttle Cable Bracket, Parkerized. 34-0534 34mm Air Cleaner
VT No. 2954-4 34-0521 Cleaner Adapter
49-0207 48-0671 Mikuni Carb Parts & Information Manual
Three Bolt Mikuni Adapter will adapt a 34-36mm
35-8019
Mikuni or VT carb to large three bolt 45 and 74-80
side valve manifold. Includes two clamps and rub-
ber coupling.
VT No. Item
49-2517 49-2516 35-0216 Kit
37-0812 Clamps
35-0117 Rubber
34-1425 AC Adapter
35-0286 Intake Manifold Nuts and Brass
Flathead Intake Manifolds. Seals are available in pairs. Order
VT No. OEM Fits 35-0885
seals separately.
49-0207 27011-36 1936-73 45” WLA Kit 1930-48 U-ULH, & 1940-46 WLD
35-8019 27012-37 1937-48 74 and 80 ULH Kit
Models
15-0420 — Gasket Kit, 3 Bolt
Nuts Finish Brass Seal
15-0629 — Gasket Kit, 3 Bolt 2230-6
35-0885 — Insulator Spacer
8012-2 Chrome 8006-2
49-2516 — Manifold Only WL
9702-2 Parkerized 8006-2
35-0282 27011-36 OEM Manifold, WL 8007-2 Cadmium 8006-2
49-2517 — Manifold Only U 1937-73 45” Models
15-0420 8227-2 Chrome 7356-2
35-0286 — Manifold K, WR
35-1707 — Inserts 8228-2 Cadmium 7356-2
35-1952 — Nut Set 9703-2 Parkerized 7356-2
35-0937 — WR Kit Intake Manifold Nipples have threaded inserts, sold each.
15-0420 — Gasket Set Screws into cylinder.
9422-1 45” 1937-1973 VT No. Fits Models
35-1707 9422-1 1937-73 45 WL and G
9423-1 74” & 80” SV 1930-1948
2953-4 Carb Bracket, Parkerized 9423-1 1930-48 Side Valve 74 and 80, WLD
Charging System
32-1497 32-0305 32-1282 Black 12 Volt Alternator
Generator Conversion Kit replac-
es 6V 32E generator on Flathead
models. Kit includes battery box, 12
V battery, top cover, gear kit, and
1/4 X 24” mount screws.
Generator 12V Conversion Kit includes alternator and
black solid state regulator. Fits 1936-1952 W and 1936-73 VT No. 32-1109
G. Order gear kit separately.
VT No. Item 32-1781 32-1785
32-0376 Alternator Generator Conversion Kit 17 Amp
32-0305 12 Volt Alternator Kit
32-1547 32-1497 Complete Kit with gear
32-1282 Alternator without gear
32-1547 SV Gear Kit
32-1385 12 Volt Relay
Stock Generator Mounting Screws. Alternator Conversion Kit includes 12 volt alternator, correct
Chrome Cad Parkerized Brush gear with slinger deflector, oil gasket, nut and finned solid state
For 45” 1937-57 chrome regulator. Fits 1937-73 45”models.
8207-2 8208-2 9712-2 3 VT No. Finish
For 45” 1958-73
8209-2 8210-2 2 32-1157 Conversion Kit
For 74” and 80” ULH 1930-48 32-1781 Chrome
9109-2 3 32-1785 Black
804
49-0107 49-0073 45” Hand Shifter
22-1081
49-0147 49-0074 21-1938
22-0045
1940-46 Shifter Gates for 45 models. Pattern is noted from top
to bottom. Gear from Top to Bottom
VT No. OEM Speed Type Pattern Shifter Lever Kit includes correct gate, rod, end, pivot bolt and shift
49-0107 33785-40 3 Black 1N23 lever in chrome for left side mounting. Note: Pattern from front to rear.
49-0073 33790-39 3 Chrome 1N23 VT No. OEM Type Pattern
49-1317 3 Black Smooth (No Number) 1936-46
49-0040 33785-40 3 Chrome 1N23 22-1098 45 Servi 3-Speed and Reverse R1N23
49-0042 Army 3 Black 1N23 49-0040 22-1079 45 Solo 3-Speed 1N23
49-0027 33786-47 3 & R Chrome
1947-73
49-0147 33786-40 3 & R Chrome R1N23
8212-3 33822-36 3 & 4 Gate screws (3) Chrome 22-1080 45 Servi 3-Speed and Reverse 32N1R
37-9026 1940-46 Gate screws (2) Chrome 22-0045 45 Servi 3-Speed and Reverse 32N1R
9710-3 Gate screws (3) Parkerized 1947-52
CLASSIC
Shift Gate for late type for 1947-65. 22-1081 45 Solo 3-Speed 32N1
VT No. OEM Fits Speed Pattern 1938-73
49-0074 33785-47 1947-54 FL 3 32NI 21-1938 33675-37A Chrome Lever
21-0187
1947-52 W 21-0188 Chrome Lever, 1936-46
49-0111 33791-47 1947-65 FL 3 32NIR 21-1937 33675-37A Painted Lever
1947-73 G 21-0157 33675-37B Chrome Lever 21-0894
Rubber Pad Sets
28-0301
21-0187 33675-37 Chrome Lever
7818-5 33775-37 Pivot Bolt Kit
21-1664
28-0302 28-0312 45 Shifter Rods.
21-1664 WL With welded clevis
21-1939 33859-41 Cadmium w/hook
21-2043 33859-41 Chrome w/hook
21-2069 33859-41 Parkerized w/hook 21-1939
21-0873 Zinc
21-0946 33851-47 Zinc, Servi-Car
21-0894 Rod, Rod End Kit & Shoulder Pin 21-0946
21-0976 — Chrome Servi-Car
2647-3 — Pin
Left Side Right Side 21-0475 — Pin threaded
Clutch and Brake Pads in a three piece sets unless noted. 21-0231 — Rod End Kit
VT No. Color 21-0238 — Chrome 21-0231
28-0301 Black 21-0240 — Parkerized
28-0302 White 45 Jockey Lever Kit fits 1941-73 Solo and Servi-
28-0551* Black 1 piece *Note: Oval Pad only Car, rod must be fabricated.
28-0312 Black, Replica VT No. 49-1941
49-1921 Rocker Clutch Petal Shifter Lever Stud and Bushing Kit to mount shifter lever on
Pads. Cast original style 1936-54 Twins with handshifter.
with nickel plating. VT No. Finish
VT No. Type 7818-5 Cadmium
49-1921 Toe 9711-5 Parkerized
49-1923 49-1923 3 Piece Set 9018-5 Chrome
40-0150
Side Valve Line Set
Flathead 74 and 80 Oil 1938-73 45 Flathead and Servi-car available in chrome or
Line Sets VLs are two cadmium, Sold in sets or individual pieces.
piece sets, in cadmium. Chrome Cad OEM Item
UL-ULH are three piece 40-0372 40-0104 3 piece Set
sets. 40-0136 40-0139 63510-37 Feed
40-0137 40-0140 63570-37 Vent
VT No. OEM Type Years Model 40-0138 40-0141 63507-38 Return
40-0369 — Set 1930-33 VL — 40-0522 25235-36 Vent Nipple
40-0368 — Set 1934-36 VL — 40-9998 63590-41 Rear Chain Oiler
40-0373 — Set 1937-48 UL-ULH — 40-0518 63573-36 Banjo Bolt
40-0105 — Set As Above Chrome — 3069-3 Nipple Bolt Kit 1937-73
40-0150 3571-37 Feed 1937 UL — 14-0154 6440 Washer, 10 pk
40-0151 3571-38 Feed 1938-48 — 40-0670 63577-36 Banjo Only
40-0152 3572-37 Vent 1937 UL — 40-0157 3570-36B Feed Washer
40-0153 3572-38 Vent 1938-48 UL Ground Clamp attaches to oil line on 1936-
40-0154 3571-37B Return 1937 UL 40 models, each.
40-0155 3571-38B Return 1938-48 UL VT No. 31-0275
3003-3 Banjo Bolt Kit 1937 U 805
45” Parts 18-0116 18-0891
V-Twin 45” Model Primary Belt

Kit includes steel front pulley and
clutch drum for 1929-73 45” model
kickstart only and 1¹⁄₂” wide belt.
For open primary use only. 1941-64 45 Primary Chain Drive System. Kits include 96 or
VT No. Item 100 Diamond primary chain, clutch drum and hub with steel and
20-0524 Complete Kit fiber clutch plates with pressure plate assembly. Front motor
20-0034 Belt sprocket and nut included.
VT No. Links Model
49-1272 49-1278 22-1971 18-0116 96 Servi-Car 1941-63
18-0981 100 45” 1941-52
18-0988 96 Servi-Car 1964-73
18-0782 Clutch Pak (Chain not included.)
Brake and Foot Clutch Control Kits. 45 Hand Clutch Kit fits 1941-73
VT No. Item Year models, includes cable, cable bracket
49-1272 Clutch Pedal Kit 1941-73 and handle. Zinc plated.
49-1278 Jockey Pedal Kit VT No. Item
22-1970 Brake Pedal Assembly 1936-51
22-1971 Chrome Foot Clutch Assembly 1936-52 22-0808 Hand Clutch Kit
22-1972 Parkerized Foot Clutch Assembly 1936-52 49-0275 Cable Bracket
22-0078 Chrome Brake Assembly 49-1891 Clutch Fitting 49-0275
45 Foot Clutch
45 Clutch and Brake Lever Parts 49-0935
49-1962
13-0209
49-0831
49-1956
49-0966
45” Clutch and Brake Lever Parts 1941-52 Solo models. Foot Clutch Bracket Bushing
VT No. OEM Item
49-2002 36812-38 Rocker Lever, Chrome Installation Tool fits Big Twin and 45.
49-0932 36812-38 Rocker Lever, Parkerized 27-0600 VT No. 2550-2
49-1962 Chrome Jockey Pedal 2550-2 49-2008
49-1956 36813-47A Jockey Pedal Continued 45” Clutch and Brake Lever Parts Listing
2351-2 — Lever Pivot Shaft VT No. OEM Item
2654-6 — Servi-Car Lever Stud 49-2008 42401-39 Brake Pedal, Black
2669-6 — Servi-Car Lever Stud 49-2009 42401-39 Brake Pedal, Chrome
49-0934 36832-38 Cover, Chrome 49-1274 42401-39 Brake Pedal, Black 49-2009
49-0943 36832-38 Cover, Black 49-1374 Kit Brake Pedal, Black
49-0663 2409-39 Cover, 1936-39 49-1375 Kit Brake Pedal, Chrome
10-2508 36857-36 Brass Bushing for Bracket 13-0209 44484-35 Brake Return Spring, pair
13-0170 36880-36 Spring, Chrome 13-0213 44484-35 As Above, Chrome, each
13-0743 36882-47 Cable Spring 13-0275 44484-35 Brake Spring, Parkerized
2353-2 36871-41 Spring Stud 49-0965 50510-38 Front Support Rod, Black
37-8956 36895-36 Bracket Friction Disc, each 49-0966 Set Front and Rear Support Rod
37-8955 36897-36 Fibre Washer, 5 pack 37-9247 50516-32 Rear Rod Nut, each
37-8957 36901-36 Steel Disc 45, each 37-9246 50517-38 C-Front Rod End Nut, 5 pack
37-8937 36906-36 Spider Washer, 5 pack 9802-14 Kit Rod End Nut Kit, Parkerized
37-8958 36908-36 Washer Disc, each 49-1374
49-1034 Rear Rod Only
37-8954 36909-36 Lock Plate, 5 pack Footboard Mount Straps
49-0933 36916-36 Cable End, 10 - 32, Zinc 49-2080 Clutch Strap, Solo, Left, Chrome
49-1723 — Cable End, Servi-Car 49-2064 Clutch Strap, Solo, Left , Parkerized
49-0160 36975-41 Cable Assembly, Parkerized 1941-46 49-2067 Strap Brake Pedal Strap, Parkerized, 2 pk
49-1732 36975-41 Cable Assembly, Chrome 1941-46 49-1564 Brake Pedal Strap, Chrome 49-1375
49-1668 36975-47 Cable Assembly, Parkerized 1947-52 49-2066 Strap Clutch, Parkerized, Servi-Car, Left
49-1674 2424-29 Clutch Rod, RL 1929-1936 8773-12 50635-14 Footboard Hinge Bolt Set
37-8959 7984 Rocker Pedal Nut, 5 pack 49-2064 Strap Solo, Left, Black
49-0831 Friction Kit (9 Piece) 49-1956 Pedal Servi-Car, left clutch
49-0935 — Kit, Eight piece. Friction Set includes: 49-1962 Pedal Servi-Car, Chrome
36901-36, 36897-36, 36895-36, 36908-36, 2 (36906-36), 36909-36, 7984 Nut (8 pcs.) 27-0600 Kit Footboard Supports, Black
23-0936 Servi-Car Brake Pedal Kit
23-0936
806
45” Model Components
45” Main Drive
16-0960 Gear Seal
Installer replaces
12747-41.
VT No. 16-0960
16-0823
16-0823 16-0908
Clutch Hub Nut Tool installs and removes

nut. Fits 1941-73 45”, handle sold separately
16-0908.
VT No. 16-0823
45” Clutch Hub Related Parts for 1941-73 Solo and Servi-Car. 45” Clutch Related Parts for 1941-73 Solo and Servi-Car.
VT No. OEM Year Item VT No. OEM Item
49-0933 36916-36 1936-73 Cable End, Zinc 12-0514 37361-41 1941-73 Adjuster Nut
18-8304 36916-36 1936-73 Cable End, Cadmium 12-0556 37460-41 Hub, nut
49-0046 36916-36 1936-73 Cable End, Parkerized 17-0925 37462-41 Lock Tab
CLASSIC
49-0160 36975-41 1941-73 Cable Assembly Parkerized 17-1925 — Lock Tab
13-0743 36882-47 1941-73 Servi-Car Clutch Cable Spring 17-1926 37625-33 1933-40 Lock Tab
49-0126 — As above Chrome 9533-2 — Hub Nut with Lock
49-0148 37052-44 1944-73 Clutch Arm, wide 49-0088 — Clutch Hub Complete
8920-3 Rebuild All models Fulcrum with rivets 49-0061 37551-41 Hub, without bearings
8904-6* 37076-41 1941-43 Solo Pivot Arm Bolt Kit 49-0045 Clutch Hub with rollers 49-0088
1941-73 Servi-Car Cadmium 18-3674 37568-41 Ball Retainer with balls
9709-6* As Above Parkerized 18-3700 — Retainer Only
2639-1 37867-41 1941-73 45” Clutch Lever Grease Fitting 18-3675 37577-41 Bearing Plate
8410-8* 37077-44 1944-52 Solo Pivot Arm Bolt Kit Chrome 18-3127 37586-41 Short Stud Set
8411-8* As Above 1944-52 Solo Cadmium 18-3678 37590-41 CH. Liner with rivets
8412-1 37287-41 1941-73 Throw Out Bearing Assembly 18-3224 37695-41 Clutch Drum
18-0126 37287-41 1941-73 Throw Out Bearing Assembly 18-3703 37695-64 Clutch Drum, electric
18-0127 — 1933-40 Throw Out Bearing Assembly 18-3225 37713-69 Ring Gear without rivets 18-3672
14-0126 37335-41 1941-73 Pushrod Seal Kit 18-3227 Rivets, may be shortened for use on early drums.
12-0541 37358-41 1941-73 Adjuster Screw Chain wheel must be riveted to clutch shell 49-0045
12-0871 As Above Screw with 12-0514 nut 18-3673 37873-41 Releasing Disc
18-1137 37952-41 Replica Clutch Set
18-1737 37931-41 2 Full, + ¹⁄₂ plate
18-1123 As above Barnett Clutch Set
18-1137 18-1128 37977-41 Steel Plate with rattlers
18-3672 38011-41 Pressure Plate 18-3703
13-0139 38075-41 1941-73 All Clutch Springs
49-0983 Kit Clutch Hub Bearing Kit
49-0474 Kit Clutch Hub Nut
49-0419 34873-41 Sprocket Cover 1941-43 WL
49-0503 34873-41 Sprocket Cover 1941-43 W Narrow
49-0416 34873-44 Sprocket Cover 1941-45 W
49-0427 34873-44 Sprocket Cover 1944-53 WL
*Note: Includes bushings, pivot bolts and locks.
Replica Clutch Kit for 1941-73 45’s is riveted to steel plate just like original. 49-0983
Throw Out Arm and
Consists of two full plates and one ½ plate, also available bonded to alloy by Bearing Kit.
Barnett. VT No. 49-1725
VT No. Item
18-1137 Friction Set (3 piece)
18-1128 Steel Drive, each
49-1725 49-1722
18-1123 Barnett Friction Set 49-0491
18-1737 Kit, Complete
18-0451 Friction Plate (2) 14-0126
45” Clutch Arm
49-0491 1941-43
49-0148 1944-73
45” Big Fixx Kit
includes long roll- 49-0295 49-0148
49-1294
ers to replace ball 45” Pushrod Seal Kit includes all parts
bearings and cage pictured.
on clutch hub. VT No. Item
VT No. Item 14-0126 Complete Kit
18-0230 Kit 13-0229 37347-42 Spring Only
49-0855 Plate 45 Clutch Arms.
VT No Item
49-1678 49-1725 Throw Out Kit 49-1295
49-1682 49-1722 Clutch Arm Kit (W)
49-0491 Narrow Clutch Release Arm
49-0295 Clutch Release Arm, 1941-1952 W
Servi Car Clutch Cable Components. 49-0148 Clutch Release Arm, 1944-52 WL
VT No Item Finish 3063-2 Hand Clutch Adjusting Screw Kit
49-1747 Cable Kit 49-1294 Narrow Arm Kit
49-1672 Cable 1958-73 Parkerized 49-1295 Wide Arm Kit
49-0126 Cable Chrome Replica 45
49-0172
49-1747 49-1723 Cable End Parkerized Transmission
1/4” x 24 Case, bare case. 3 Transmission
13-0743 Cable Spring speed. Bottom Stud
49-1682 WR Clutch Parkerized Pedal Kit VT No. 49-0172
49-1672 Kit for side valve
49-1278 Chrome Clutch Pedal Kit
models.
49-1272 Clutch Pedal Kit, w/o cable
VT No. 9919-3
807
45” Transmission
17-4500
45” Transmission 4 Speed Kit is fully assembled as shown.

VT No. 17-4500
49-0683
49-0649
4 Speed Transmission Speed Kit includes door (ten pieces).
With the 4 speed conversion in a 45” transmission, the reverse 4-Speed 45” Transmission Kits for 1941-63 Kick Start.
gear option CANNOT be installed. VT No. Type Note
Fits W 1941-1952. VT No. 49-0683 49-0649** 4 Speed Gear Kit 3-Speed
Converts 3-Speed to 4-Speed
49-1931 49-0455 Door 4-Speed
12-0596 Engine Case 3/8” Welch Plug
17-9868 Transmission Mainshaft Outer Race
10-2490 Transmission Countershaft Bushing
*Note: Requires VT No. 49-0455 door
49-1930 49-2581
45” Transmission Shifter Drum is rolled
and formed as original and allows 1947-up
forward shift patterns on 45 transmissions.
VT No. 49-1028
Kick Starter Flat
Rubber Pedal
Assembly includes
mount bolt pin kit with
17-0283 bushing for one piece
kick starter arms 1936-
49-2600 76 models.
VT No.
45” Kicker Arms. 17-0283
VT No. OEM Type/Finish
49-1931 33509-41 Solo/Black Alloy Kick Starter
49-1930 33509-41 Solo/Chrome Pedal Kit includes
49-2581 33058-29 Servi-Car/Black hardware.
49-2600 Servi-Car/Chrome VT No. 17-0877
17-0283 45 Kick Pedal
45” Kicker Arm Bolt Kit
Parkerized Chrome Model
2792-3 2784-3 WL
2797-3 2798-3` Servi-Car
Rat-Trap Sifton Kick Starter
Pedal is parkerized finish on
shaft and pedal. By Sifton
VT No. 17-0624
Parts for 45"
17-0851 KICK STARTER GEAR
17-0897 KICK STARTER PEDAL PLATE SET
17-1520 TRANS COUNTERSHAFT REVERSE GEAR
17-9802 SHIFTER PAWL ASSEMBLY
808
45” Transmission
45” Transmission Hardware for 1938-73 3-Speed and
3-Speed with reverse models. 15-0607
VT No. OEM Item
8610-1 704 Fill Plug to 1940, Chrome
8611-1 704 Fill Plug to 1940, Cadmium
8631-1 703 Fill Plug, 1941-73 Chrome
9719-1 703 Fill Plug, 1941-52 Parkerized
12-0703 6752 Sifton Transmission .015 Shifter Fork Shim
9411-27 1206 Top and Side Cover Screw Kit, 1941-73 Cadmium
9410-27 1206 As Above, Chrome
9666-27 1206 As Above, Parkerized
2655-1 2326-35 Transmission Fill Plug, 1935-40
15-0607 33030-41 Gasket Kit 13-9248
49-2581 33058-29 Kick Arm, Servi-Car, Black
13-9248 33084-41 Kick Spring, Black
13-0122 33084-41 Kick Spring, Chrome
9754-1 33088-41 Kick Stud, Chrome
9755-1 33088-41 Kick Stud, Cadmium
49-1931
9756-1 33088-41 Kick Stud, Parkerized
49-1999 33093-41 Kick Shaft, Extension, Servi-Car
10-2493 33101-32 Bushing Starter Shaft
17-9867 33380-32 Starter Clutch
CLASSIC
13-0126 33390-26 Spring
13-0167 33455-26 Countershaft Spring 49-0082
37-8256 33456-26 Tripper Screw, 2 pack
9761-4 33456-26 Tripper Screw and Nuts 49-0172
33458-41 Nut, 6 pack
9761-4T Tripper Screw and Nut Kit
2525-1 Slotted Nut Driver Tool
49-1931 33509-41 Arm, Black
37-9171 33874-41 Clevis Pin
49-1033 33874-41 Shift Gear
49-1032 33961-47 Shift Gear 49-1671
17-9772 34051-38 Lock Screw
3116-2 Colony Lock Screw
17-0134 34031-41 Shifter Shaft Cam
17-0772 Shifter Shaft Kit, 7 piece
17-9866 35340-33 Reverse Gear Thrust Washer, 5 pack 49-0082 34140-41 Shift Fork Shaft
17-9865 35341-41 Low Gear Thrust Washer, 5 pack 49-0203 34161-41 Shift Fork
17-9824 35344-41 Low and Second Gear Thrust Set 17-0097 34165-36 Shifter Finger
49-0080
.040 to .075, 8 piece 17-0117 34168-39 Shifter Finger Rollers, pair
17-9835 35380-41 .075 to .115, 8 piece Mainshaft 17-0049 34176-41 Shifter Finger Bushing
Spacer Set 10-2518 34427-38 Shifter Shaft Small Bushing
49-0415 35441-41 45” Low Gear, Shift Clutch 10-2514 34432-38 Shifter Shaft Large Bushing
49-2004 35442-41 Shifter Clutch, Low and Reverse 17-9832 34449-40 Inner Shift Lever 17-0821
17-9834 35445-41 45” Shifter Clutch, 2nd and 3rd 49-1671 34449-52 Inner Shift Shaft
49-0937 35612-64 1964-73 45” Countershaft Electric Start 17-0983 Shifter Lever Clip
49-0202 35613-41 45” Trans Countershaft 14-0633 34459-26 Shift Leather Seal
49-0204 35709-41 45” Trans Cluster Gear 1941-63 49-0172 34702-41 45 Transmission Case
17-9836 35910-33 45” Outer Thrust, 5 pack 9838-10 Kit Transmission Mount, Cadmium 17-9868
17-9837 35911-33 45” Inner Thrust 9919-3 34725-26 Transmission Bottom Stud Kit
17-9838 35913-39 45” End Washer 17-9841 8625-1 34736-27 Gear Box Adjusting Screw, Cadmium
10-2547 36035-26 Left Countershaft Bushing 9693-1 34736-27 As Above, Parkerized
10-2490 36042 41 45” Countershaft Bushing 17-1282 As Above, Parkerized
17-9839 36141-41 Reverse Idler Gear 49-0080 34821-41 Side Cover
49-0205 34813-41 45” Trans Access Cover 17-9916
17-0391 36159-41 Reverse Idler Shaft
8410-8 37077-44 Clutch Arm Rebuild Kit 1944-52 Solo, Chrome 49-0747 Chrome 45” Trans Access Cover
8411-8 37077-44 Clutch Arm Rebuild Kit 1944-52 Solo, Cadmium 14-0634 34831-39 Case Rubber Oil Seal, James
8904-6 37076-41 Cadmium Clutch Arm Rebuild Kit 1941-43 Solo 49-0514 34871-41 Sprocket Cover 1941-43 W
8412-1 37287-41 45” Throw Out Bearing Assy 1941-73 49-0419 34873-41 Sprocket Cover 1941-43 WL
14-0126 37335-41 45” Clutch Pushrod Seal 1941-up, 5 pack 49-0427 34873-44 Sprocket Cover 1944-53 WL 17-9824
49-0413 37450-41 45” Transmission Clutch Gear 49-1722 Set Sprocket Cover and Arm
10-0753 37458-41 Clutch Gear Bushing 8622-16 34892-33 Cadmium Sprocket Cover Stud Kit
12-0556 37460-41 Clutch Hub Nut 9686-16 34892-33 Parkerized Sprocket Cover Stud Kit
9533-2 37460-41 Clutch Hub Nut Kit 49-0201 35043-41 Main Shaft,1941-73 49-0202
17-0925 37462-41 45” Clutch Hub Lock Tab 17-0821 35047-41 Replica Mainshaft 1941-73
14-0169 37460-41 Clutch Gear Oil Seal 17-9868 35102-33 Main Shaft Outer Race
14-0642 37465-41 Clutch Gear Oil Seal, James 17-9884 35102-33A As Above .005 49-0204
12-0343 47467-71 Thrust Bearing 17-9864 35110-33 Main Shaft Thrust Washer, 5 pack
17-9926 37474-41 45” Roller Bearing Race 12-0211 35195-26 Transmission Sprocket Key
17-9841 37477-41 45” Clutch Gear Bearing Race 18-0678 Nut Kit, 1930-40
17-9842 37480-41 Clutch Gear Thrustwasher, Left Side 19-0881 16T Sprocket, 1929-40
12-0556
17-9915 37482-41 Countershaft Washer 19-0062 35204-41 17 tooth Countershaft Sprocket
18-0523 45 Clutch Drum 17-0933 35216-26 Sprocket Lock Tab
35221-36 Main Shaft Sprocket Seal
45” Mainshaft Transmission Rollers set of 24. 45” Mainshaft Roller Set (44 Pieces
24 Pack OEM Size
49-0010 Sprocket Seal Steel Ring
Required)
17-9211 9075 Standard 49-0414 35275-41 Main Shaft 1st Gear
17-9217 9084 Standard
17-9212 9076 .0004 12-4576 As Above, 100 pack 17-9916 35284-41 Reverse Gear
17-9213 9077 .0008 17-9218 9085 .0004 17-9917 35294-41 2nd Gear
12-4505 As Above, 100 pack 17-9219 9086 .0006 10-2515 35316-41 Low Gear Bushing
45” Countershaft and Mainshaft Rollers set 12-4609 .0008 10-2517 35320-41 2nd Gear Bushing
of 40. 17-9220 .0010
17-9214 9090 STD
10-2523 35326-33 Reverse Gear Bushing
12-4586 9092 .0008, 100 pack 17-9823 35332-33 45” Spacer Collar
17-0372 35333-41 2nd Gear Retaining Bracket
2734-3 3754 Lock Tab 809
Primary Chain 45" Side Valve Sprocket
19-0367 45” Engine Sprocket Kit for 1929-73
all Solo and Servi-car.
VT No. Item
19-0880 21 Tooth
19-0870 22 Tooth
19-0871 27 Tooth
19-0872 30 Tooth
19-0873 19-0874 31 Tooth
19-0360 19-0873 33 Tooth
19-0680 33 Tooth
12-0200 Key
12-0501 Nut
Motor Sprocket Nuts sold each.
Replica Figure 8 Side Plate Style VT No. OEM Fits
12-0501 7991 1929-73 45”
12-0503 24003-30 1930-54 Big Twin
12-0503 12-0504
7101-1 Colony As Above
7101-1T V-Twin As Above
19-0364 19-0363 7620-1 Colony 1955-up
Diamond Endless Primary Chains. 12-0504 V-Twin 1955-up
VT No. Size Fits JD Motor Sprocket fits 17 tooth 1915-29 F.
19-0367 428x2-82 1936-64 Big Twin 74 and 80, Figure 8 VT No. 19-0160
19-0360 428x2x82 1965-84 Big Twin (Oval)
45” Transmission Sprocket is 17 tooth
19-0392 428x2x80 Special Length
with built in seal.
19-0363 35x3-92 1952-56 K-Model VT No. Item
19-0364 35x2-96 1938-73 Servi-Car 19-0062 Sprocket
19-0365 35x2-100 1929-52 Solo 19-0328 Sprocket
19-0366 428x2-88 1930-36 VL 19-0481 Sprocket, accepts OEM seal
19-0380 428x2-90 1930-36 VL Solo 19-0881 16T, Early
Primary Chain Connector Links. Sold each. 12-0520 Nut
19-0062
VT No. Type Model Fits Chain Brand 12-0211 Key
19-0074 Sprocket Kit
19-0356 35 x 2 45” Side Valve Diamond
14-0176 Seal
19-0459 35 x 2 45” Side Valve York 14-0183 Seal, OE
19-0377 428 x 2 1936-85 Big Twin York
45 WL Rear Sprocket.
19-0876 19-0934 VT No. Item
19-0010 Sprocket Kit
19-0089 Splash Ring
19-0004 Rivet Set
13-0123 13-0122 42-0217
York Primary Chain has shot-peened, heavy-duty side plates
and solid roller construction.
VT No. Fits Style Link
19-0845 1941-52 Big Twin Oval 82
19-0876 1936-64 Big Twin Oval 82
19-0934 1936-64 Big Twin Fig. 8 82
19-0877 Nickel Plated Fig. 8 82
19-0372 1941-84 Oval 84
19-0818 35x2x96, 1938-73 Servi-Car 96
13-9249 13-9248 13-0945
19-0849 35x2x100, 1929-52 Solo 100
Kickstarter Return Spring for all 1936-85 Big Twins and
all 1941-63 45” models.
VT No. OEM Model Finish
13-0123 33085-36 Big Twin Chrome
13-9249 33085-36 Big Twin Black
13-0945 33085-36 Big Twin Parkerized
13-0122 33084-41 45” Chrome
13-9248 33084-41 45” Black
42-0217 33150-59 Big Twin Chrome Cover
Kick Spring Studs fit 1941-63 45” kick starter.
Engine Sprocket Kit includes 23 tooth tapered motor sprocket Replaces 33088-41.
with nut, key dust ring, seal ring and a 82 link figure 8 primary
chain. Kit features the correct configuration to fit 1936-1952 EL 9756-1 Parkerized
and 1941-1954 FL models. 9755-1 Cadmium
9756-1 9754-1 Chrome
VT No. 19-0272
810
49-0246 45” Parts
51-0892 51-0884
49-2547
51-0866 49-0143
49-1871
CLASSIC
13-0171
2768-10
13-0177
2767-10
13-0189
45 Solo and Servi-Car Front Engine Bar.
Jiffy Stand Parts for 1929-52 45 Solo models. VT No. OEM Years Finish
VT No. OEM Item
51-0892 49035-35 1929-73 Black
49-2547 50002-32 Complete Assembly, Black Leg
49-0246 50002-32 Complete Assembly, Chrome Leg 51-0884 49035-35C 1929-73 Chrome
49-1871 50002-32 Jiffy Stand Assembly, Black 51-0866 1929-73 Chrome, 1”
49-2003A Bushing, Parkerized 49-0143 49061-32 U Bolts Zinc
49-2382 Leg Only, Chrome 2767-10 Kit U Bolts Parkerized
13-0189 — Replica Spring 2768-10 Kit U Bolts Chrome
13-0171 50012-30 Black Spring
13-0177 50012-30 Chrome Spring
49-1161 — Spring Kit, Parkerized
45” 6 Volt Coil Kit with
49-0466 Spring Kit, Chrome/Zinc clamps.
49-0964 50035-30 Spring Plate, Zinc VT No. 32-1127
49-0023 — Long Spring Plate
49-2381 — Parkerized Leg Only
49-2546 — Cast Bracket Only
49-0065 50060-30 Jiffy Leg, Black
49-2003 50060-30 Jiffy Leg, Chrome
49-2068 Kit Chrome Leg 51-0893 51-0904
49-0066 50092-30 Leg Bushing
49-0089 50110-30 U Bolt Kit, Chrome
37-8819 50110-30 U Bolt Kit, Black
2653-5 50110-30 U Bolt Kit, Parkerized Rear Frame Bars fit Rear 45” Solo 1929-52.
VT No. OEM Finish
51-0893 13030-39 Black
51-0904 13030-39 Chrome
49-0925 45 Rear Bar Mount for
solo models 1938-52.
49-1936
49-0177 VT No. Item
49-2543 Mount Plate
49-2544 Stud Set 49-2543 49-2544 51-0893
Rear Frame Stands for 1936-52 45” models. Order stand 2682-17 U Bolt Kit
catch and mounting hardware separately. Replaces 49502-36.
VT No. Finish
49-1572
49-1936 Black
49-0925 Chrome Lid Handle Parts.
49-0177 Peg Set Chrome Raw Item
Rear Stand Catch. Fits 1936-52 45" solo. Replaces 49581-36. 49-1565 49-1561 Latch Kit
VT No. Finish 49-1572 49-1576 Bar 49-1561
31-3994 Black 49-1383 Bar/Latch Kit
49-1920 Chrome 17-0783 Shifter Shaft Bushing Nut
Mounting Hardware, Parkerized finish except where noted.
VT No. Year Models
8840-10 1930-35 All with bolts and washers
8841-10 1936-37 All
8015-4 1938-57 All
9616-4 1938-57 All, Chrome
811
45” Parts 27-0251 27-0114
50-1538
50-1543 Chrome Chain Guards. Order hardware separately.
27-0251 60303-36 1936-52 45” Solo
27-0114 60303-36 As Above Black Powder
27-0487 WR Guard
13-9187 60350-36 Spring 45”, 10 pack 27-0487
Rear Chain Guard Mount Kits include bolt, nut, spring,

washers and cotter pin for Big Twins and 45’s.
50-0601
50-0600
VT No. Finish Fits
9745-7 Cadmium As Above, Kit
9746-7 Parkerized As Above, Kit
13-9186 Black 1936-57 Spring
27-0600 27-0704
31-0526
50-0615
31-0928
Footboard Mount Bracket Kit. 45” four piece set fits 1929-52 Solo and 1933-
Toolbox and Bracket for 1941-52 31-0526 Bracket Zinc 73 Servi-car.
45” Solo. 31-0928* Bracket Black VT No. Finish Item
VT No. Item Finish 9669-9 Hardware Kit Parkerized 27-0600 Black Kit
50-1538 Kit Chrome 9669-9T Hardware Kit Parkerized 2579-18 Black Kit
50-1543 Kit Black 51-0428 Frame Tab 8773-12* Cadmium Bolt Set, Hex
50-0600 Toolbox Chrome *Note: For use with square type toolbox 9685-12* Parkerized Bolt Set, Hex
50-0601 Toolbox Black only 9886-12* Parkerized Bolt Set, Slot
50-0615 Toolbox Raw 27-0704 Parkerized Bolt Set
*Note: Mounts footboards to brackets
Primary Cover
42-0599 49-0590 42-0597 49-1027
42-0234
45” Inner Primary Cover is available for 1937-63 Solo and Servi-Car. Chrome
or raw for painting.
VT No. Finish Year
49-0590 Black 1937-63
42-0597 Chrome 1937-63
49-1027 Black 1964-73
49-1031 Chrome 1964-73
49-1031
8627-9 Inner/Outer Primary Mount Kit
42-1114 2521-4 Inner Primary Mount Kit 2521-4
42-1113
3111-2 Tool
45” Outer Primary Cover is 8627-9
available original or with accessi-
ble clutch area for 1937-63 Solo 49-0301 49-0308
and Servi-Car. Both may be cut
8627-9
out for electric start. Chrome or
raw for painting.
VT No. Finish
42-0051 49-0190 42-0599 Chrome 49-0310
42-1542
42-0234 Black
42-1113 Kit, chrome
42-1114 Kit, black
8627-9 Hardware Kit
Inspection Covers. 49-2544
VT No. OEM Model Type
42-0051 60569-29 45” Flat 45” Replacement Battery Box for Solo or Trike. Top is included. Order mount
49-0190 60569-29 As Above Army plate VT No. 49-2543 separately and hardware separately. Items noted as black
42-1542 Black Powder, pair are black powder coat.
VT No. OEM Years/Model Note
1930-36 Brake Light Switches
49-0301 66202-29 1929-53 Solo Raw 49-2543
include bracket, lever and chain.
49-0307 66202-29 1929-53 Solo Black
Bracket is parkerized and spring.
49-0308 66203-40B 1940-63 Servi Black
Order rod clamp separately if
49-1482 49-1483 49-0302 66203-40 1940-63 Servi Raw
required.
49-0311 1932-39 Servi Black
VT No. Year Model
49-0310 66377-29 Top Only Black
49-1482 1936-38 U & EL
49-0303 66377-29 Top Only Raw
49-1483 1936-38 Servi
49-0206 66377-29 Top Only Chrome
49-1484 1930-36 VL
12-0546 66387-24 Top Wing Nut 10
49-1485 1934-38 RL
49-1484 49-1485 49-2543 66302-29 1929-53 Mt Plate Each Chrome
49-2544 49180-36 1929-53 Mt Stud Pair
812
51-1017
45 Replica Stock Style
Rigid Frame features
forged components in
45” Parts
neck, motor, transmission, 44-0561 44-0349
seat post and rear axle
plates. Frame accepts
original components for
1936-1952. Order neck Fits 1941-52 45” Solo.
cups separately. Kit Cpt Spacer Sleeve Axle only Nut Kit Model/Year
VT No. 51-1017 44-0561 44-0343 44-0331 44-0216 9688-4 Black
44-0349 44-0323 44-0331 44-0347 8832-4 Chrome
51-0436 51-0460 7814-2 8479-2 9628-2

51-0456
Rear Chain Adjuster Sets are heat treated. Available in
51-0465 pairs with plated lock nuts assembled to insure proper fitting
51-0465 threads.
Chrome Cadmium Parkerized Fits
CLASSIC
7814-2 8479-2 9628-2 1930-52 Solo 45”
45 W Rolling
Frame Components Chassis Kit features
VT No. Item black fork assembly,
51-0465 Hard Tail raw frame, black
51-0470 Battery Box wheels with black
51-0472 Cable hubs, stainless steel
51-0436 Cross Brace spokes, black handle-
51-0456 Rear Axle, Plate bars and a black rear
51-0460 Fork Neck frame stand.
51-0461 Front Mount VT No. Type
51-0431 Seat Forging 55-1941 Stock
55-1950
51-0459 Rear Motor Mount 55-1944 TT
51-1242 Rear Brake Clamp 55-1950 WL TT
51-1762 Top Motor Mount Tab 55-1951 TT
49-2527 Seat Mount 55-1699 Fork/Frame
51-1763 Top Motor Mount 55-1651 Fork/Frame/
51-0473 Clutch Cable Mount Handlebar
51-0467 Motor Base
51-0458 Front Stay Rod Forging
31-0838 Toolbox Mount
Speedometer 36-0624
Side Valve Speedometer Cable Clamps
note cable size of fitment. Cables fit 1937-52 45” Solo models.
Colony VT No. # OEM Fits VT No. Type OEM Length End
9649-5 37-9234 D 67086-39 1937-48 UL 36-0622 R. Wheel 67023-37 50” ⁵⁄₈” M
9647-1 — B 67074-37 1937-53 45 Fits 1937-52 45” Solo Models fit late type VT Speedo.
9648-1 — C 67076-41 1937-53 45, 36-0624 R. Wheel — 50” ⁵⁄₈” F
rear Fits 1937-61 Servi-Car Models.
36-0600 Rear End 67028-51 54½” ⁵⁄₈” M
C Fits 1962-73 45” Servi-Car Models.
B
A 36-0626 Rear End 67028-62 54½” ⁵⁄₈” F
49-0210 49-0239
45” Parkerized Throttle & Spark Cable Brackets. Speedometer Drive Units include housing and gear as OEM
VT No. # OEM Year Type replacement, for transmission drive. 45” types are for the rear
9006-4 A 3371-37 1937-48 Throttle wheel. Fits 1937-52 45” Solo.
9007-2 B 9967 1930-73 Throttle & Spark VT No. OEM Teeth Finish 49-0209
9008-5 C 55627-38 1930-48 Spark 49-0210 67129-37 8 Chrome

49-0239 67129-37 8 Zinc
45” Speedo Cables are 50” long. 49-1745 Kit Parkerized
Zinc Nut 49-1746 Each Parkerized
36-2571 Male 49-0209 67080-37 Retainer for Above
36-2572 Female 49-0096 Small Gear
49-0097 Ring Gear
813
Servi-Car
Front Axle Nut Kits include
sleeve nut, along with castle nuts
and cotter pins. Fits 1930-71
45” Servi-Car Spring Fork Servi-Car.
Assembly includes full set of springs, VT No. Finish
inner and outer, front and rear legs, Complete Axle Kits fit 1936-48 Big Twin with offset 8162-3 Chrome
rocker set with all studs and bush- stock rockers. 8162-3 8162-3T Chrome
ings, spring rods with bushings. VT No. Finish 8163-3 Cadmium
Chrome units feature front legs and 44-0581 Chrome 1939-57 45” and Servi-Car
outer springs in chrome. Full chrome 44-1983 Parkerized Complete Spring Fork
units have both front and rear legs 2366-6 Installation Kits include
in chrome with chrome springs and zinc plated neck cups, ball
rockers. Top clamp, neck races and bearings, upper and lower
cone nut not included. races, black nut with dust cover pressed on and parker-
For 1940-57. ized top nut.
Black Full VT No. Type
Powder Chrome Item Servi-Car Rear Wheels include hub with key way. 24-0655 Ball
49-2402 49-2414 Fork Laced and trued, pairs. 24-0245 Timken
2635-2 Stud Kit VT No. Spokes Hub Rim 32-0705 Wiring Harness Kits
52-0984 Chrome Chrome 16” Chrome feature cotton braided
Servi-Car Rear
52-1871 Pol. Stainless Chrome Black wire and asphalt loom.
Sprocket fits 1932-73,
19-0013 heat treated sprocket 52-0985 Stainless Black 16” Black Kits include all low ten-
52-0986 Stainless Black 16” Chrome sion wires. Order tail lamp
has 37 teeth.
52-0987 Chrome Chrome 18” Chrome and handlebar harness
VT No. 19-0013
52-0988 Stainless Black 18” Black separately.
52-0989 Stainless Black 18” Chrome
49-0007 1937-50 Brake Plate VT No. OEM Application
13-0210 2366-6 Parkerized Rear Axle Nuts Servi-Car-G-Models
Black Servi-Car Rear Wheel 5 lug pattern and is for 32-0705 70321-48 1948-57
hydraulic brake rear ends.1951-72. VT No. 49-1205 32-0706 70321-58 1958-64
32-0720 — 1966-70
23-9168
32-7582 70272-71 1971-73
VT No. OEM Year Item 23-1757 Handlebar Wires
23-1993 44402-36 1936-49 Front Shoe Set 32-9315 1936-64
13-0209 44484-35 1935-49 Front Shoe Springs 32-9332 1965-69
49-0182 7238-39 1930-51 Rear Brake Rod Servi-Car Front Fender for 1949-57.
9500-4 82906-32 Chrome Axle Adjuster VT No. 50-0739
23-1993 44402-36 1936-50 Rear Shoe
13-0209 44484-35 1936-50 Shoe Spring Rear 23-0747 23-2269
23-1757 83350-51 1951-73 Rear Shoes, sold pair 1951-73 Servi-Car Rear Brake Components. 50-0739
13-0210 83373-51 1951-73 Rear Shoe Springs, VT No. OEM Item
83375-51 sold pair 23-1757 83350-51 Shoe Set (each) Servi-Car Rear
23-9243 83560-51 1951-73 3 Piece Rear Line Set 23-9168 83355-51 Lining Set (each) Hub Caps in
83562-51 1951-73 Includes Left and 2 23-0747 83500-51 Master Cylinder Complete chrome for three
83564-51 1951-73 Right Side Pieces 23-2269 83460-51 Wheel Cylinder Complete (each) 49-0916 49-0157 wheel rears. Each.
23-0709 83566-51 1951-73 Brake Line Tee 23-0602 83462-51 Wheel Cylinder Rebuild (each)
49-0183 83697-51 1951-73 Rear Brake Rod Servi-Car Clutch Cables with ¹⁄₄” - 24 threads.
2092-12* 1932-42 Rear Axle Clamp Bolt VT No. Item Finish
2093-12* 1943-73 Rear Axle Clamp Bolt 49-1668 Cable Parkerized
49-0337 45527-41 1941-57 Rear Fork Leg Black 49-1723 End Parkerized 49-1309
49-0422 45085-30A 1941-57 Front Brake Cable Assy 49-0904 End Zinc
54.5” Long Rear End VT No. OEM Years Item
13-1939 46059-39 1941-57 Lower Inner Fork Spring 49-0916 83960-37 1937-50 3 prong, raw, pair
Transmission Drive
Black 49-0157 83915-51 1951-73 Baby moon, chrome
Speedometer Cables fit
13-9200 As Above Chrome 36-2598 49-1309 7258-32 1932-34 Hubcap, parkerized
1937-73 Servi-Car Models.
*Note: Sold per side two kits required
49-2741 54-1531 Servi-Car Rear
VT No. OEM Fitting Type Year
Trim is stainless
36-0600* 67028-37 ⁵⁄₈” Male Black 1937-61
fender trim with
36-0616* 62028-37 ⁵⁄₈” Male Replica 1937-61
clips. Replaces
36-0626 67028-62 ⁵⁄₈” Female Black 1962-73 49-0395
85102-39, 85101-
31-1550 36-2598 67028-62 ⁵⁄₈” Female Replica 1962-73
39. For 1939-54.
*Note: Fits OE speedometers with female fitting,
VT No. 49-0395
1936-61 style for aftermarket speedo use 62-73 cable
Servi-Car Speedometer Drive Trim
Servi-Car Rear Frame Parts Units include housing and gear as VT No. 50-1667
VT No. OEM Item OEM replacement for rear end. 50-1667 Fender Only
49-2741 84640-42 Coil Spring Set
VT No. OEM Teeth Fits 49-2567
54-1531 85202-42 Shock Set 49-0837 49-2586
36-0496 67131-38 8 1938-61
31-1550 85211-42 Brackets for shocks, parkerized
36-0495 67131-62 13 1962-73
Outer Chain Guard Mount Kit 36-0567 Gear Only 8 1938-61
for Servi-Car.
VT No. 2431-9
Servi-Car Box Handle Sets in black, chrome or raw.
VT No. Year Finish
31-1743
49-0837 1932-39 Raw
49-2567 1939-65 Black
49-2586 1939-65 Chrome
Solid State 6 Volt
Relay with replaces
mechanical relay and
includes a Replica
black Delco Remy
Replica Brake Handle with ratchet plate. Fits cover. Unit does not
1941-57 G 49-1997. Use on Servi-Car models with allow for use of the
emergency brake. “New Old Stock” army 45 oil cap. Fits charge indicating lamp on the dash. Mounts as origi-
VT No. 26-0946 1937-52 W. nal relay, hardware is not included. Solid State relay is
VT No. 49-1782 shipped loose with base and cover.
814 VT No. 32-1545
45” Restoration
Wiring Harness Kits feature cotton 49-0138 49-0274
braided wire with asphalt loom and
handlebar and tail lamp wires included.
Replaces 4736-42M, fits 1942-45 Army 49-0478
45”. Military Mirror features black finish with adjustable stem and clamp
VT No. Item set. Replaces 11350-41M.
32-7555 Harness VT No. Type
2618-12 Switch Spacers 49-0138 V-Twin
49-0478 Replica Black
Early Twins Wiring Harness Kits are complete and 49-0274 Replica Military Style
32-0704
feature cotton braided wire and asphalt loom. Black Army 45 Shifter Gate is military type for 45
VT No. OEM Application models. End is “snipped for safety” being slightly
32-0700 4735-30 1930-36 RL shorter than a civilian type. *Note: First is forward,
32-0701 4735-36 1936-37 WL N, 2, 3, Back. VT No. 49-0042
32-0703 4735-38A 1938-46 WL
32-7555 4736-42M 1942-45 Army 45” Front Marker Military Lamp for WLC.
32-0704 70320-47 1947 WL-G 1942 unless noted.
VT No. 49-7683
CLASSIC
32-0705 70320-48 1948-57 WL
Army Brake Handle, Cast iron parkerized.
VT No. Item
26-0583 26-0583 Handle
49-1327 Tab
Hand Lever Lock Tab.
VT No. 49-1327
49-2539 Parkerized Tail Lamp Bracket for 45” army models accepts
two guide tail lamps. Fits 1941-1944 WLA.
49-0008 49-0496
2554-34 VT No. 49-1665
49-0166 Parts for 45"

2951-1 WIRE CLIPS, PARKERIZED
45” Military Replicas in primer finish, mounts to front spring forks. 2960-1 SPARK PLUG CABLE WIRE CLIP, PARKERIZED
VT No. Item
2996-1 SPARK PLUG CABLE WIRE CLIP
49-7683 Front Marker Lamp
49-0986 Cast Luggage Rack 49-0985 3038-18 GAS TANK MOUNTING KIT, PARKERIZED
49-0042 Shifter Gate 31-1037 TOP MOTOR MOUNT, CHROME
49-2539 Tire Pump, 11553-41M 31-0000 SERVI-CAR CLAMP SET, PARKERIZED
49-0194 Blackout Box 31-0008 SOLO SEAT MOUNT HARDWARE KIT
2554-34 Gun Bracket Mount Kit 31-0044 45" OIL TANK MOUNT PLATE, PARKERIZED
2590-13 Skid Bolt Kit 31-1237 45" BATTERY BOX TAB, RAW STEEL
49-0496 Main Switch 31-1238 45" W BRAKE CLAMP, RAW STEEL
49-0019 Army OE Ignition Switch
31-1362 GENERATOR MOUNT STRAP, BLACK
49-0008 Switch without key
49-2571 4” Blackout Spotlight with visor (NOS)
49-0543 45” FRONT AXLE KIT, BLACK
49-0608 45” WL ROCKER STUD SET, Parkerized
Servi-Car Patch Set
Black and orange Servi-car patch
set reads: 45 Restoration Albany,
N.Y.
VT No. 48-0483
45” WLA Repair Manual.
133 pages, color diagrams.
VT No. 48-0521
Kick Starter Flat
17-0283 Rubber Pedal
Assembly includes 45” Gift Set
mount bolt pin kit with VT No. 48-0522
bushing for one piece
kick starter arms 1936-
76 models.
VT No. How to Restore 45” WL Patch.
17-0283 Your Military Harley- VT No. 48-1637
Davidson 1932-1952
Second Edition. 464
pages.
VT No. 48-1393
815
45” Side Valve Exhaust
30-0640 30-0183
45 Military Stock Replacement Muffler fits
1940-45.
Black Chrome 45 Civilian Stock Replacement Muffler
30-0184 30-0862 replaces 1035-41. Stock on 45’s 32-49.
45 Cubic Inch 2 Piece Header Set for
1937-73 Solos and Servi-Cars. 30-1394 Raw End VT No. Type
Replica Type Model 30-1397 Chrome End 30-0182 Black
30-0640 Kit Solo 30-0183 Chrome
30-0622 Black/Raw Solo 30-0185 30-0251
30-0630 Chrome 45”
30-1273 Black/Raw Servi-Car
30-1274 Chrome Servi-Car 30-0192
30-0459 Flex Tube All
30-1399 Chrome Rear Pipe 45 Civilian Muffler.
30-0020
30-0671 Black Servi Car Black Chrome Year
30-0185 30-0192 1950-52 Servi-Car Muffler for 45” Servi-Cars.
VT No. Type Year
30-0936 30-3100 30-0186 Black/Raw 1936-73
30-0937 30-0251 Chrome 1936-73
45” 11/2” 30-0020 Black Replica 1936-73
Black Turnout Pipe. Fits 1930-52 WR. 30-0418 Black 1932-35
VT No. Item Antique Pipe Sets sold as raw or painted with black primer as a rust preventative
30-0936 Exhaust Pipe End 32” Chrome 1¹⁄₂”Drag Pipes. Order measure only after manufacturing. We do not guarantee black finish for surface finish
or ability to withstand heat. We suggest that the pipes be repainted with our heat
30-0937 WRTT Long Style Exhaust Ext. P-Clamps separately. Fits 1929-73 45” S.V. proof VHT finish.
Exhaust Mount Bolt Kit Pipe P-Clamps Finish Batique Pipe End
VT No. Finish 30-3100 31-2100 Chrome fits over 1³⁄₄” exhaust
3077-18 Parkerized Hanger Strap tube. Sold each.
3078-18 Chrome VT No. 31-1377 VT No. 30-0793
Big Twin Side Valve 30-0166
30-0164 UL Stock Replacement Muffler With

Built-In Y-Pipe. Replaces 65201-37. Used
29-1103 on all 74-80 side valves 1937-40 and 1936-
30-0880 40 Knucklehead.
29-1103 Replacement Muffler replaces 65251-41. VT No. Type
Installed Fits all 1941-49 FL, EL, UL. 30-0995 Black, Replica
VT No. Finish Bolt Kit 30-0165 Black
30-0163 Black 30-0166 Chrome
30-0164 Chrome 2719-22 30-0995 Replica
30-0880 Black, Replica 30-0996 Replica, Chrome
30-0884 Chrome, Replica 31-3950
30-3125
31-9010
Big Twin Exhaust Pipe Clamp Sets complete in black or chrome
for single exhaust. Number of clamps in each kit shown.
SV 1³⁄₄” Parkerized Chrome Black Year Model/Pieces
31-2125 31-3950 1936-40 Knucklehead (3)
UL-ULH Exhaust System available 31-3953 31-2128 1937-40 ULH (3)
in 3 or 4 piece. The 3 piece style uses 31-9003 31-9004 1941-48 ULH (4)
the muffler with built-in “Y” (30-0165, 31-2130 31-3956 1936-51 45’s (4)
2772-22 2719-22 1936-57 BT Bolts
30-0166), the 4 piece style uses standard 31-9010 1951-73 G Muffler
36” Chrome 1³⁄₄” Drag Pipes. Order
1³⁄₄” inlet mufflers (30-0163, 30-0164). Hanger Kit
P-Clamps separately. Fits 1936-48 Big
The three piece is stock on 1937-40, four 31-0000 1951-76 G Clamp
Twin Side Valve. and Hanger Kit
piece on 1941-48.
Pipe P-Clamps 49-2579
VT No. Finish Pieces
30-3125 31-2101
30-0167 Black 3
30-0168 Chrome 3
Rear Hanger Reinforcement Clip braces
29-1103 Black 4
rear muffler clamp at mount bolt. Body
29-1104 Chrome 4 clamp not included.
Note: Three and Four Piece Replica Exhaust VT No. Fits Finish
Systems require hand fitting during final assembly. 49-2578 1936 EL, 1937-40 UL Black 45 WR Exhaust Drag Pipe Set features
We suggest to loosen motor mount bolts during 49-2591 1936 EL, 1937-40 UL Chrome a radius that bends for better exhaust flow
installation to allow pipes to adjust to motor position
49-2579 1065-41 1941-47 FL Black and a black finish. Fits 1936-1952 W.
then re-tighten engine bolts.
49-2592 1065-41 1941-47 FL Chrome VT No. 30-1306
816
VL 1930-36
Side Valve Big Twin 74” and 80” Side Valve Components that are interchangeable for 1936-48 are listed for the Big Twin Section.
28 Tooth Transmission Sprocket
9209-1 replaces 2034-15 on JD models
1915-29, VL models 1930-36.Drilled.
VT No. Item
Side Valve J.D. Exhaust Parts 19-0065 Sprocket
17-1761 3rd Gear 49-0601 49-0623
VT No. Item Year
9209-1 Nipple 1924-29
9210-1 Nut 1921-29
49-0169 Header 1925-29 Rear Frame Stands for 1930-36 VL. Order stand
catch and mounting hardware separately. 49-0601
VL Top End Engine
features channel shape design. Replaces 3051-30.
Gasket Set.
VT No. Item
VT No. 15-0527
49-0601 Stand Black
49-0623 Stand Chrome
8840-10 Mount Bolts Parkerized
Handlebar Spiral features nickel plated
JD and VL Gas Caps. Caps are screw in type. threaded sleeve. Each.
VT No. OEM Item VT No. 49-0459
30-3213
CLASSIC
49-0136 3507-16 Gas Cap, 1916-34
49-1155 VL Clutch Plate Set
49-0137 3507-35 Gas Cap, 1935-36
for 1930-36.
49-0178 4521-26 Ignition Key Set 1923-36
VT No. Year
Clamps Not Included With Header Sets. 49-1155 Plate Set
VL Exhaust Parts for 1930-36 Side Valve models. 18-2324 Collar Set
VT No. # Item Finish 49-0603 Screw Set
30-0171 A Header Set Black 13-0232 Spring Set
30-0169 B Muffler Black
49-1322 49-1323 38-0929 30-0170 B Muffler Chrome Rear Axle Adjuster Kit includes cad
Gas Cap Bung with a threaded insert features a 30-3212* C Muffler Black plated bolts, parkerized collar and
44mm outer diameter and must be welded in place 30-3213* C Muffler Chrome parkerized nuts fit 1930-1936 VL.
VT No. Type *Note: Features an upsweep Tail Piece for 1934 only. VT No. 2069-5
49-1322 Smooth Note: 3 and 4 Piece Replica Exhaust Systems require
49-1323 Outside Threads hand fitting during final assembly. We suggest to loosen 19-0389 JD Model Rear Sprocket features
38-0929 Set holes as original in black finish with 48
motor mount bolts during installation to allow pipes to
teeth. Replaces 2049-30. VL bolt kits
38-0641 Cap Set adjust to motor position then re-tighten engine bolts. for 1930-36 VL.
49-2590 VT No. Item
19-0389 Flat Sprocket
Rear Brake Rods in parkerized. Fit 1930-35 VL 19-0390 Dish Sprocket
replaces 4063-30. 49-2590 2069-5 Adjusters
VT No. 49-0079 8318 CAD Motor Kit
Exhaust Pipe Clamp Sets complete in black or
2604-12 Footboard Bolts
Shifter Gate Nuts fasten the chrome for single exhaust. Number of clamps in each
shifter gate to the tank. kit shown. Fits 1930-36 VL.
VT No. 8846-2 Chrome Black Item
31-3954 31-2129 Clamp
49-2590 49-2577 Tab 24-1454
31-2161 24-1465
VL Chains, Endless. 31-2161 Set, Parkerized
VT No. Links Footboard Mount Kit fits 1930-36 VL 24-1569
19-0380 90 models, parkerized.
19-0380 VT No. 2604-12
VL Springer Spring Set fits 1930-36 VL Front and Rear

1930-36. Stainless Steel Spokes.
VT No. 13-1935 VT No. Size
45-0735 18”
45-0736 19”
VL Transmission 45-0981 Hub VL Fork Cone Pieces.
Gaskets for 1930- 44-0507 VT No. Item
15-0379 15-0411 36 Side Cover. 24-1454 Neck Cup Set
VT No. Type 24-1465 Lock Nut
15-0379 Side 24-1569 Fork Bearing Kit
15-0411 Top 24-1466 Complete Kit
44-0481
1915-35 JD-VL Transmission 44-0896 Kit
Gear.
VT No. Item VL Axle. 3 Bolt Linkert Carburetor
49-0272 2298-15 Slider Gear VT No. Fits Gasket Kit includes 3 bolt gas-
17-1761 Drive Side Gear 44-0507 1930-36 Rear Only, Parkerized kets for 1¹⁄₄" 3 bolt Linkert, and 2
44-0481 1930-36, Parkerized insulator gaskets.
49-0504 44-0717 Sleeve VT No. 15-0420
49-0504 45-0981 Parkerized Hub 15-0420
45-0985 Nickel Plated Hub 44-0718
44-0719 Race
44-0718 Locknut
15-0568 Seal Kit 44-0886
44-0983 Hub Bearing Kit
49-1104 52-1040 Rim 16-0386
VL Flanders Top Triple Tree. 52-0679 Wheel
VT No. Item 16-0386 Tool
49-1104 Triple Tree 44-0886 Bearing Kit
49-0504 Riser Kit 49-0504 Riser Kit
Lever Strap and Screw Kit fits 49-0665 Washer
1930-36 VL.
44-0983
VT No. 26-0930 817
K-Model Motor Parts
Head Bolts Kits. K-Model Valve Cover Sets
Cad Chrome Fits for 1952-56 KH + K-Model.
9641-16 9640-16 1952-57K-KR-KK Replaces 18239-54 and
9643-16 9642-16 1954-56 KH 18255-52A.8 pc. Set, zinc
K-Model Valve Spring Kits VT No. Item
include springs collars and 11-0911 Set
keepers. 3057-4 Lower Only
1952-56
K-Model Gasket
Kit does not
VT No. Year
V-Twin Piston Kits include 2 Cast Alloy Pistons, include head
13-9205 1952-53
1-Piece Ring Set, 2 Wrist Pins and 4 Circlips. Rings gaskets as none
13-9206 1954-56
also available separately. are used on
13-0221 13-0222
Flathead K-Model Side Valve K-Models.
Size 2.745 Bore Rings VT No. 15-0699
Standard 11-0438
Valve Springs. .010 11-0431 11-2530
VT No. OEM Year Model .020 11-0432 11-2523
13-0221 18201-52 1952-53 K Model .030 11-0433 11-2532
13-0222 18200-32 1953-56 KH Model .040 11-0434 Crank Pins made of 8620 steel.
Primary Chain .050 11-0435 11-2534 Model Years OEM Jims Eastern
19-0363 35 X 3 -92 1952-56 K Model .060 11-0436 11-2535 3 Hole 3 Hole
.005 Oversize Pinion Right Side .070 11-0437 K Model 1952-53 23960-52 10-0132 10-8371
Case Race fits 1954-56 K-KH Wrist Pin 11-0869 each KR-XR 1½” All 23960-55R — 10-0383
Replaces 24585-54. VT No. 10-0276
Steel Valve Collars.

VT No. OEM Use Year Model 30-0180
30-1288
1952-56 K-Model Guides. Use the same 11-0660 18220-30 Upper 1930-73 45 SV +K
guide on intake or exhaust. 11-0812 18165-41 Collar 1954-56 K-Model
VT No. Size 11-0813 18223-53 Spacer 1952-53 K-Model
11-0792 Standard 40-1258
11-0822 +.002
11-0823 +.004
Truett and Osborn 30-1083 30-1082

Flywheel Sets fea-
ture original weight
right and left sides.
Fits 1952-56 K XLH and K Oil Lines are cadmium plated, includes Header Pipes
models. nuts and seals. VT No. Finish Type Fits Year
Bare Flywheels VT No. OEM Item 30-0180 Chrome Drag K/KH 1952-56
Only 40-1262 63507-52 Return Line 1952-55 30-1288 Raw Drag K/KH 1952-56
VT No. 10-1068 40-1258 63507-56B Return Line 1956-64 30-1083 Chrome 2:1 K 1952-53
40-1263 63570-52A Vent Line 1952-55 30-1082 Chrome 2:1 KH 1954-56
40-1259 63570-56A Vent Line1956-64
Hummer Parts
47-0116 Note: Do not
over fill, fill to
cover top of
plates only as
per instructions
provided. This
battery vents
through the
31-0974 caps. There is 32-0058
No Warranty on
Hummer Parts fit 1947-65 Model 125 and 165.
Leakage due to
over filling. VT No. OEM Item Fits
32-8092 70322-55 Wire Harness Magneto
13-9252 H-3 Battery features black construction as original 32-8093 70332-53 Wire Harness Battery
Hummer Solo Seat features steel ribbed baseplate replaces 66001-47. 32-0058 29580-55 Points 1955-up Magneto
with nose bracket. Genuine black leather construction VT No. 53-0520 28-2134 50940-55 Peg rubbers All Driver
replaces 52001-50. Measuring 13.5 x 13.5. Order 8310 CAD — Hardware kit Both Engine
30-3194
springs separately. 9215-2 702 Oil Fill Plug All Engine
VT No. Item Drain Plug, Pair
47-0116 Seat 49-2545 68040-55 Taillight Bracket
13-9252 Springs Hummer Replica Header Sets. Muffler sold separately. 27-1709 50006-52 Kick Stand All, Zinc
31-0974 Nose Bracket VT No. OEM Item/Type 13-0174 50001-49 Kick Stand Spring All, Black
31-0227 65290-51 Clamp 51-62 23-0327 42256-47 Brake Rod 1947-62
Hummer Tail Lamp is a
23-0328 42256-63 Brake Rod 1963-up
replica version of a tail lamp 31-0308 65523-57 Front Muffler Clamp Stainless Steel
with bullet hood and glass Hummer Petcock replaces 62125-50, die Spare Parts Books.
lens. Mounts to fender and cast with threaded end for line. VT No. Year
includes license plate mount VT No. OEM Item Year 48-0981 1948-55
slots. Replaces 68001-47. 35-0650 62125-50 Petcock 1950-58 48-0982 1956-65
VT No. Item 49-0187 62358-50 Gas Line 1953-58
33-2160 Chrome
33-2152 Black
818
1952-71 K and XL Fork Parts
1952-67 XLCH Cast 1954-70 XL Fork Boots and Hardware Kit includes gaskets, felts, retainers, washers, vent
Sprocket Cover fea- tubes and clamps.
tures early rib design, VT No. OEM Item
includes worm and 28-1994 46001-54 A-Boot set, pair
hardware, replaces 37-9016 Hardware Kit Without Boots
34874-52A. 37-9017 46007-54A B-Boot retainer upper, pair 15-0669
VT No.43-0133 24-0680 10006 C-Boot Clamp
37-9016
15-0668 46009-54 D-Washer, boot retainer, 10 pack
31-9019 46010-54 E-Disc, boot retainer, pair
37-9020 46020-57 F-Boot vent, pair
Stock Sprocket Cover Screws. 15-0669 46021-57 G-Gasket, boot vent, 10 pack
for K-Model 1952-53.
VT No. Finish
8889-2 Cadmium
1952-57 K-Model Primary Cover Screw Kit.
9852-5 Chrome 1952-72
9853-5 Cadmium Damper
Tube
Clutch and Brake
Assembly
Lever Assemblies
includes all
include cable pin.
components for both sides on XL and FX forks. This
CLASSIC
Available chrome
is a direct replacement for 1968-72 models, and may
or polished with ³⁄₈”
be installed on 1952-67 models by drilling the lower
or ⁵⁄₁₆” hole sizes for cable entry. VT No. 26-2167 and
leg center hole to ⁷⁄₁₆” to allow use of larger mount
26-2168 accept front brake switch.
screw. Order spring set if required.
Chrome Polished OEM Hole Fits VT No. Item Front Brake Parts fit 1952-72.
26-0520 26-0521 38604-65A ⁷⁄₁₆” 1965-70 Clutch 24-0454 Internal Kit VT No. # OEM Item
26-0525 26-0526 45002-65 ⁵⁄₁₆” 1952-68 Brake 24-0900 Fork Springs N/A A 44148-64 Polished Backing Plate
1952-67 Clutch 12-0908 Lower Snap ring 24-0116 B 44156-64 Pivot Stud, 1964-72
26-2167 26-2168 45002-69 ⁵⁄₁₆” 1969-72 Brake 15-0327 Tube Gasket 24-0609 C 44307-52 Chrome Lever
1952-56 K Model Clutch Front Brake Cable. Replacement 36-2385 D 45060-54 Cable Assembly
Cable with adjuster. core and casing for 1952-72 8818-3 E 45159-50 Adjuster, zinc
VT No. Item Sportster models. Replaces 45073- 8818-3T E 45159-50 Adjuster, zinc
36-0406 Cable Assembly 51 60” long, must be cut to proper 9741-2 E Chrome As Above
37-8460 Adjuster Only 36-2385 length. 37-8676 F 45174-64 Zinc Clevis
VT No. Type 24-0095 G 45203-52 Chrome Front Brake Tube
36-2385 Stock Type, V-Twin 24-0646 As Above Cadmium
36-2565 Stock Type, M & M 2041-7 H 45218-53 Parkerized Throttle Cable Bracket
Rubber Cable Oiler Boot 36-0501 Stock Type, Barnett 13-0146 I 41835-69 Spring Set, Parkerized
replaces 38690-55, for XL 36-2489 Braided Steel 23-0505 J 44432-54 1952-63 Linings
1955-80. 5 pack. Replica Clutch Adjuster Sleeve. Fits 23-0450 J O.S. 1952-63 Linings
VT No. 28-0401 1954-71, ⁷⁄₁₆” hole levers. 23-0506 J 41848-64 1964-72 Linings
VT No. Finish 23-0525 41849-64 Shoe Set
Chrome Top Fork Tube 23-0519 K 44264-64 Brake Cam, 1954-72
37-8460 Zinc
Plug replaces 45756-59. Brake Cable Clamp cinches
2576-1 Cadmium
Sold each. cable to brake arm.
VT No. 7621-1 30-0742 VT No. 26-0508
K Mufflers have 2³⁄₈” body diameter, 1³⁄₄” inlet.

Cable Clamp is fitted to hand lever for
VT No. OEM Fits Type emergency or permanent use. Easy to
30-0742 65231-52 1952-56 K-H 21¹⁄₂” Replica install .460” diameter, pair
31-0231 65279-52 1952-55 K Body Clamp VT No. 26-0509
31-0226 65519-52 1952-56 K-H Header Clamp, pair
Slider Bushing set of 4, replaces 45818-52. Use on 30-0742 Replica 1952-56 K-KH 21¹⁄₂” Tool Box Wing Nuts are zinc plated,
1952-72 XLH-XLCH models with steel lower sliders. Wire Harness for 1952-58 replace 64500-52A, pair.
VT No. 24-0145 K-Model. 6 Volt. Replaces 70320- VT No. 37-6136
56. Tool Mount Kits are cadmium, replace
VT No. 32-7552 64500-52A, pair. VT No. 2005-9
8900-1T Speedometer Drive Units include

housing and gear as replacement,
Fork Tube Spring Retainer and Pin Wrench Kit
for transmission drive. 11 Teeth for 42-0732
includes 2 retainers for 1952-72 Sportster and pin
1952-72.
wrench for installation and removal of retainers.
VT No. Item
VT No. 7700-3
8900-1T Drive
K and XL 15-0216 Gasket K Battery Top replaces 66375-52 on 1952-64
Early Fork 15-1071 Gasket 6-Volt models, in chrome finish.
Cover Set is Stainless Steel 1-7/8" Muf- VT No. 42-0732
constructed fler End Clamp Set. Transmission Drive Speedometer
of chrome VT No. 31-1236 Cables. All have female nuts at
plated steel transmission end and top nut as
and includes noted. Fit 1952-56 K Trans Drive
all panels models.
pictured,
replacing Black Zinc OEM Length Top Nut
46298-52A, 46269-52 46292-52 and 46291-52. The 36-2570 36-2577 67051-52A 46” ⁵⁄₈” F
46298-52A top panel does not have a key switch
hole covers or provisions.
VT No. 24-0261
819
K and XL Parts Leather XLCH Seat
measures 13.5” x
13.5” fits 31-0512
seat tee.
VT No. Color
47-0158 Black
47-0164 Brown
47-0021 Black
Replica Leather WR Model Solo Seat is covered
with genuine leather on a stock formed steel ribbed 47-0021
baseplate, constructed as original with rolled sewn
1952-78 Replica Style 3.5 Gallon Tank for XL’s. edge with riveted under strip, replaces 52000-40.
VT No. 38-0038 Available in black which bolts to any stock seat tee
as custom or stock replacement.
Bayonet Large Cap replaces
VT No. 47-0110
61103-52. Fits 1952-70 XL.
VT No. 38-0329 33-2120A
31-4024
1952-54 K-Petcock replaces 62125-50, die

33-2120
cast with threaded end for line.
VT No. 35-0650
33-2254
K-Model 1952-54 Steel Gas Lines.

VT No. # OEM Line Finish 33-0072
40-1261 A 62355-52 Cross Cad
7” K Headlight features oil/generator lamps and 31-4083
40-1264 A As Above Cross Chrome
sockets, replaces 67704-52. Unit includes chrome rim
40-1260 B 62357-52 Gas Cadmium Seat Plunger Kit includes all parts pictured for 1954-
and 6 volt sealed beam.
70 KH-XL-XLCH-XLH Sportster models, to spring
VT No. Finish
mount solo seat on stock frames. Some frames may
33-2120 Chrome, Complete
require honing to fit bushing housing.
33-2120A Shell
VT No. Item
33-2254 Black, Shell
7" K-model Head- 31-4024 Complete Kit, All
33-0072 Black 7” Headlamp with rim
lamp features a black 13-1952 4 Springs, Set (A and B)
shell with chrome rim, 13-9173 Swivel Springs, Pin, (F)
a replica guide cycle 6 31-0508 37-9114 Tee Bolt, (C)
volt beam bulb and 2 10-2564 Bushing, (D)
indicator lamps. 10-2563 Spacer, (E)
VT No. 33-1509 31-4083 Kit with Tee
Seat Mount Tabs fit 1952-79 XL

may be welded on for custom
31-0512 application, pair.
Replica Steel Rear VT No. 51-0539
Fender features full
length style with rear
flare, without taillight Coil Mount Studs replace
cut. Mount for 1955- 64611-55, 64612-55 models,
72 type must be pairs. Fits 1955-67 XLH.
cut in. K-Model Type Seat “T”. Precision stamped and VT No. 37-9156
VT No. 50-1068 formed seat “T”for mounting our K-model or D series
saddles.
VT No. OEM Fits Chrome Shock Spring
31-0508 51901-52 47-0110 Seat Covers is replica type
31-0512 51902-54 47-8716 Seat for shocks which disas-
semble at lower eye. Fit
50-0912 Chrome Rear Fender Bracket fits 1957-70 XL, 10³⁄₄”.
1954-78, reduces vibration between VT No. 54-0402
fender and frame, includes foam
pad, replaces 59795-52A.
VT No. Item
50-0912 Bracket with pad
33-2151
28-2246 Foam pad only
Rim and Spoke
Spoke Sets available for conventional or drop center rim type.
1964-72 Chrome Chrome Stainless Rim
FX-XL V-Twin Buchanan Buchanan Size Type*
Alloy Drum 1964-72 XL-FX Front Drum
Front 45-0658 19” Conventional
Brake Hub
31-0237 45-0622 45-0724 45-0657 19” Drop Center
45-0659 21” Conventional
1952-63 1952-63 XL-K Front
K and XL 45-0708 18” Conventional
1952-54 Early Tail Lamp and Parts. Note: Lenses
1/2 Drum 45-0707 19” Conventional
are made of glass.
Front
VT No. OEM Item
Hub
33-2151 K Tail Lamp Complete Kit w/chrome hood
31-0237 59991-52 K Model license plate bracket Above Hubs are shown
for reference only
820
News Flash! Sidecar
After 93 years, Harley-Davidson has
discontinued the sidecar as of August 2010 as Replica Sidecar Fender Upper Connection Parts are avail-
told by Sarah Harley, granddaughter of William Lamp fits 1934-65 models. able separately for 1936-up sidecar.
Harley, cofounder of Harley-Davidson. VT No. 33-0406 VT No. OEM Item
49-1995 87127-36 Clamp
Fender Lamp. OEM# 59260-68. 87128-36
VT No. Item 49-1979 87135-36 Bolt
33-0402 Complete Lamp 49-1156 Kit
33-1485 Lens
Sidecar Brake Drum and Shoes.

VT No. OEM Item Year 49-1990
23-1993 44402-36 Shoes 1936-57
23-1770 44113-36 Drum 1936-48
23-0501 41801-58A Shoes 1958-79
49-0788 87750-58 Wheel Cylinder
1958-79
CLASSIC
50-0524
Sidecar Connector Kit comes complete with upper,
1936-65 Sidecar Body and Accessories 51-0295 49-0405 front and lower for the years listed for 74” and 80”
VT No. OEM Item Big Twins.
49-0118 87732-41 Brake Rod VT No. OEM Fits
49-0788 87750-58 Side Car Wheel Cylinder 49-1990 87082-36 1937-57 Rigid
with inverted flare fits 49-1991 87082-58 1958-72 SA
1958-79 Side Car Brake 49-1992 87082-73 1973-79 S
2661-7 Parkerized 1947-64 Step U Mount Bolts
Sidecar Fender assembled with brackets for 1936- Clamp Bracket Set includes 87205-58,
2616-4 Step Bolts, 1941-64
Early 67 Sidecars. Stainless trim with clips, 87206-58 with four U-Bolts.
2617-3 Step Bolts, 1936-40
50-0773 1936-Early 67 49-1989 Bracket Set
Sidecar Wrenches are heavy duty 21-0315 U-Bolt, each
50-0524 1967-09
for shop use. 1³⁄₄”. 2705-5 Parkerized, each
49-0405 1936-Early 67 Trim
VT No. 16-0111
51-0295 Windshield
31-1642 Bracket
50-1667 Fender Bare
Rear Clamp Connector Rear Connector.
VT No. # OEM VT No. OEM Item Type
49-1986 A 87083-87 49-1981 87197-36 Mount only 1936-57 Rigid
49-0999 B 87084-73 49-1983 87197-58 Mount only 1958-72 SA
49-0135 D 87192-73 49-0154 87192-58 Stud only 1958-72
Sidecar Mounting Fittings are precision machined
fittings that are replicas of the original. 49-0135 87192-73 Stud only 1973-80
49-1945 87176-37 Front Tie Rod
49-0999 87254-24 Nut and Ball Stud Set
49-1979 87135-36 Upper conn. bolt Sidecar Axle Hardware for 1936-65.
49-1980 87265-24 Joint Lock Nut VT No. Item
49-1981 87197-36 Rear frame mount 1936-57 2622-5 Longer Axle Extension
2621-5 Axle Extension Clamp On Rear Mount for mounting side cars on
49-0134 87267-24 Joint Lock Nut 1979-84 Classic & FLH models.
49-1947 87181-37 Tie Rod Spacer VT No. # OEM Item
49-1949 8034 Tie Rod Outer Nut Sidecar Spring Bushing Kit. 49-1988 A 87106-79 Connection Fitting
49-1950 8038 Rod End Nut Reproduction of 88174-37 49-0134 B 87267-24 Joint Lock Nut
49-1948 8059 Tie Rod Nut bushings used on 1937-84 49-1980 C 87265-24 Joint Nut
49-1996 — Threaded Ball Socket 2766-4 Sidecars.
Sidecar Frame Brace Upper
3008-8 6036-36 Frame Bracket & Nut Kit VT No. 2766-4
Connection Kit. Parkerized accu-
3102-1 87433-36 Axle
Lower Front Mount Tie Rod rately duplicated fasteners used on
2615-7 88010-36 Fender Inner Bracket Mt. Kit
Ball Joint Nut and Lock Nut 1937-1979 sidecars.
Lower Front Mount Tie Bar Kit. Reproduction of OEM VT No. 2620-7
Assembly. Parkerized repro- 87265-24 nut and 87267-24
duction of fasteners used 1924- locknut. Used on 1924-84 Spring to Frame Mounting Kit. Correct
84 Sidecars. Sidecars. parkerized reproductions of 88172-25
VT No. 2692-5 VT No. 2691-2 U-bolts, 88170-24 shims, washers and
Sidecar Step to Fender Mounting nuts used on 1925-84 Sidecars.
Kit. Parkerized reproduction of origi- VT No. 2716-8
Lower Front Mount Tie Rod Ball
Joint. Exact reproduction of ball joint 2617-3 nal fasteners. 23-1949
used on 1924-84 Sidecars. Replaces VT No. Year 23-1949
OEM 87254-34. 2617-3 1936-40 Installed
VT No. 2690-1 2616-4 1941-64
2621-5
Sidecar Support Rod
Emergency Brake Kit
Bushing and Stud Kit.
VT No. Year Type
VT No. 2433-18
Axle Extension Nut Kit. Exact reproduction of fasten- 23-1949 1936-73 Foot
ers used on 1930-early 1967 Sidecars. 49-0934 1941-74 Front
VT No. Year 26-0948 1951-64 Front
2621-5 Standard length 87438-30 nut
2622-5 Extra long 87438-30 nut
821
Parts for Indian Linkert Choke Lever
for Indian.
Linkert Needle
and Seat for
VT No. 49-4133 Indian.
VT No. 35-0997
Linkert Choke Door Kit

for Indian.
VT No. 35-1674 2465-1 2467-1
49-3016 Venturi for Linkert carbs used on Indian models.

VT No. Fits Used On
2465-1 41-48 Chief M-6, M-341, M-343, and M-344
2467-1 Chief 80” M-350, M-352 and M-Bonn
19-0026
Primary Components.
VT No. Item
19-0393 Primary Chain, 35 x 4 x 76
19-0476 Replacement Conn. Link for Primary Chain
19-0026 Engine Sprocket
34-0499
49-3075 Primary Chain Tensioner with shoe 49-3071
Front U Bolts. Sold in pairs. Kick Starter Parts.
VT No. # Item 13-9167
VT No. 37-8815
49-3071 Shaft
49-3093
49-4012 A Pedal
37-0057 B Pedal Bolt Parts for Air Cleaner
49-3019 49-3073 37-0993 Kick Bolt, Black (5 Pieces) VT No. Item
49-3016 C Stop 34-0907 Element
49-3006 49-3010
Top Motor Mount. Order shims and spark tube brack- Replica Chrome Air Cleaner and Parts.
et separately. 49-3093 Air Cleaner, Original Style for 1940-50
VT No. Item includes chrome outer cover screw with collar
49-3019 Top Mount Zinc and zinc back. Element sold separately.
49-3073 Spark Tube Bracket 34-0499 Backing Plate
13-9167 Mesh Spring
49-4048 49-3089
Chrome Plated Steel Replicas.
VT No. Item
49-3006 Front Bumper Loop
49-3089 Brace Set, 75599R, 55600L
49-3010 Handle Assembly Shown
Installed
49-3052
Handlebar Cross Bar fits 1936-57 Spring Fork Bars.
Features a curved bar made of 1” tubing with milled
Belt Guard is painted in primer finish or available in ends, which fit perfectly on the handlebars include
chrome. Fits 1922-53. two chrome clamps. An early aftermarket accessory
VT No. Item originally by Atlas Products.
49-4048 Belt Guard, Primer B VT No. 49-2607
49-3052 Belt Guard, Chrome 49-3018 Dash Base 1938-47.
19-0017 19-0025 VT No. 49-3018
Clutch Friction Kit and Primary Chain by Diamond
USA.
VT No. Item
19-0393 (A) 76 link Primary Chain, Chief
49-3075 (B) Primary Shoe Tensioner with shoe
Sprockets for Indian 19-0435 Gen Chain 741 49-3002
VT No. Tooth Type 49-3012 Fiber disc, 5 pack
19-0017 22 Countershaft 49-3013 Steel disc, each 49-4059 49-3005
19-0018 23 Countershaft 49-3011 Spring, each
19-0019 24 Countershaft Parts for Indian. 49-3008
19-0016 43 Rear VT No. Item
19-0025 21 Front Countershaft 49-3093 Air Cleaner Assembly Chrome 49-3003
with holes 49-3984 1946-53 Front or Rear Hub, Black Handlebar Components.
49-0050 49-3014 49-4022 Face Lens Plastic VT No. Item
49-3034 Terminal Black Stud with insulators 49-4059 Cable Nuts, pair
49-3002 Cable Stops, pair
49-0658 49-3005 Sleeve Collar Chrome, each
Clutch and Related Hardware. Installed 49-3003 Left Spiral
VT No. Item 49-3008 Throttle Driver, each 135B4534
49-0050 Pedal heel pad, zinc
49-0051 Release arm, zinc
49-3014 Chrome release knurled nut
49-0658
Torrington Type Pedal Assembly "Standard" Type
Set.
VT No. Item
Mirrors for Indian. 49-0660
49-1683 Pedal Set
28-0073 Rubber Set (4) VT No. Style Finish
49-0658 Left Black
49-0660 Replica Chrome
822
Parts for Indian
49-4123
Replica Indian Face

Lamp is constructed with
chrome die cast body
49-4021 mounted to original style
base with wire fitting.
VT No. Item
49-4021 Lamp
33-1182 Lamp with
red lens
49-4123 Red Lens
33-1182 33-0828 Base
49-3036 49-0052
Quality Reproductions.
VT No. Item
49-3036 Front mount plates without bolts
CLASSIC
32-1249
49-0052 Large hole adjuster plate, pair
49-0053 Small hole adjuster plate, pair
49-0054 Medium hole adjuster plate, pair
49-3023 49-3063 12 Volt Alternator
Conversion installs
where stock generator
fits into stock clamp. Use
12 Volt Replicas for Indian. stock belt 12V solid state
VT No. Item regulator included.
49-3023 Ignition Wire Conduit with Clamp, Chrome VT No. Item
49-3063 Carburetor Support Bracket 32-0667 Replacement
32-1879 32-1814
49-3073 Wire Conduit Bracket 32-0667 Regulator
Indian Chrome Rail Hand Set Magneto fits 1936-53 Indian with all models with 32-1249 Kit
fits 1922-53 Chief seats with- distributor.
49-3037
49-4116 out brackets. VT No. Item Brand
VT No. 49-4116 32-1879 Magneto Burkhardt
32-1814 Drive Assembly
49-3060
Linkert Carb for Indian.
1¹⁄₄" Linkert carburetor
assembly features 3 bolt
mounting for Indian Chief. 49-3009
Fits 1935-1952. Stamped Head Sets for Chief.
with "Bonn" and includes VT No. Item
throttle arm and bean pot. 49-0055 Washer Set
49-4073
VT No. 35-1350 49-7676 Head Bolt Kit for Chief
49-3060 Cylinder Base Studs (8)
49-3009 Cylinder Base Nut Set, Zinc Top End Components for Chief fits 1938-53.
Panel Gasket fits 1947-53 Indian. VT No. Item/Use
VT No. 49-4020 49-3037 Chrome Valve Spring Cover Set
49-4020 Sifton Cam Set without
49-4073 Valve Guide, Standard
shafts fits 1936-46 .415 lifts.
VT No. 49-8550
Zinc Plated Cam Cover Screw
Sets includes breather tube and oil
pump in Fillister type with washers.
53-0524
Early kit includes pipe plugs.
VT No. 49-3047
Battery Box and Top accept 6 amp battery inside.

49-3086 Original black finish and size for Chief including
terminals. Order harness separately.
Chief Flywheel Group. VT No. Item
VT No. # OEM Item 53-0524 6V Battery for Above
17-0939 A D200 Pinion/Sprocket Nut Lock Tab measures 4⁵⁄₈ x 3¹⁄₈ x 6⁵⁄₁₆
17-0938 B 22B23 Crank Pin Nut Lock Tab 49-4079 1944-47 Harness
49-3086 39586 Pinion Shaft 49-4078 1948-53 Harness
V-Twin Piston and Ring Kits for Indian Chief, 74”

(3.25 bore) include Hastings Ring Set with 3 compres-
sion rings (3/32” and a 1 piece oil ring, 5/32”) and wrist 15-1404
pin with locks for 2 pistons. 15-1400
Set Ring Set Only Size 15-1401
— 49-7009 Standard
49-7001 49-7010 .010 Gaskets for Indians.
49-7002 49-7011 .020 VT No. OEM Item
49-7003 49-7012 .030 15-1400 91800 Valve Guide to Spring Cover
— 49-7013 .040 15-1401 22B655 Chief Base Gasket with Metal
Primary Case Plug Set fits top and side of primary
49-7005 49-7014 .050 15-1404 74051-X3 Cam Cover, Chief .025
case, set, zinc plated. 1922-53 Chief.
49-7006 49-7016 .060 15-1407 75378B Chief Head,
Indian Chief Piston Pin includes VT No. 49-7557
Blue Veloprene Coating
locks, pair. 15-1410 85283-X Trans Top Cover, Chief
VT No. 49-7017
49-7017
823
Parts for Indian 49-3022 49-3033 49-3048
49-0174 49-0175
2465-1 2467-1 Replacement Parts.
49-3078 49-3077 49-4115
VT No. Item
49-0174 Brake Switch
49-0175 Switch Cover Chrome
49-0304 49-4047 Ignition Hardware.
35-0621 VT No. Item
49-3022 Distributor cable clamp
35-0482 49-3033 Points angle bracket
49-4133 49-3048 Points Set
49-4115 Distributor Cap
Fender Accessories. 49-3077 Distributor Grease Cup
VT No. Item 49-3078 Distributor Lock Shoulder Bolt
49-4047 Rear Tip 49-3017 Lower Distributor Clamp
49-0304 Polished Rack 49-3021 Distributor Advance Arm
Linkert Parts for Indian. 49-0951 Chrome Rack Replica Taillight Related Accessories.
VT No. Item 37-2096 Screw Set
35-1350 Complete Carb VT No. Item
2465-1 Venturi 1941-48 Chief Replica Indian Shock includes 49-4025 Lens Retainer
M-6, M341, M-343, M-34 bushings. Sold as each. 49-4008 Lamp Pad
2467-1 80” Chief M-350-M-352 49-0175 Switch Cover, Chrome
M-Bonn
VT No. Finish
35-0621 Nozzle 49-4075 Black 49-4049 License Plate Bracket, late
35-0622 Idle Plug 49-3032 Chrome 7” Headlights includes 12V
35-0997 Needle/Seat seal beam unit and high beam
49-4133 Choke Lever
35-1674 Choke Kit indicator with stud type mount
35-0482 Float Bowl as early spring fork style.
35-0281 Float Bowl 35-0281 Brake Handle VT No. Item
Assembly Replica 33-2156 12V Complete
for Indian in 33-0123 12V Beam
chrome.
VT No 49-3010 49-4028
16” x 3” Chrome Rim with
large holes. Fits Indian.
VT No. 52-0786 Chrome Chief Exhausts.
VT No. Item
31-0270 Muffler Clamp 1⁵⁄₈”
Detail Thor Rear Hubs. 49-4028 Muffler
VT No. Year Replica Ignition Switch
49-5511 1911 fits 1937-up Indian with 2
Replica 16” Indian Wheel fits front and rear on 1947-
49-5513 1912-1913 keys.
up Chiefs. Includes correct rim with stainless large
diameter spokes and nipples with black hub. VT No. 49-0253
VT No. Type Rim Finish 20ft 520 Chain.
52-1036 3 Cross Chrome VT No. 19-0679 Oval Mats.
52-1038 3 Cross Black VT No.
16” Spoke Sets with nipples for Indian. 28-0932 Henderson “X”
VT No. Item Pattern Rim
45-0678 1935-46 4 28-0932
45-0679 1947-53 3 45-0453 WR Spool Front Wheels
45-0753* 1936-46 4 52-0786 available in 18" and 19" with
45-0344** 1947-53 4 52-0786 2.15" width rim and 6-8 gauge
18” Spoke Sets with nipples for Indian. spokes. Hub is nickel plated,
45-0734 1935-46 4 — spokes are white zinc, rim
*Note: To fit OE style rim. Large nipples is black. Hub has retro fitted
**Note: Polished stainless steel spokes. 45-0102
with sealed ball. Bearings to
Black Wheel Hub. Nickel Plated Eclipse accept a 3/8” axle.
44-0761 Front Hub with 3/8"
VT No. Year VT No. 45-0102
49-0925 1935-45 axle and includes
49-3984 1946-53 sealed bearing. Fits
1910-1915 F.
VT No. Item
49-3007 49-3040 45-0453 Hub
44-0761 3/8" Axle
WR Front Spool Wheel. 49-1683 28-0073
44-0743 VT No. Size
Torrington Pedal Assemblies for pre1915 models.
52-0013 18”
Sold right and left sets and nickel plated.
52-0014 18”
VT No. Item
45-0102 Hub
49-1683 Pedal Set
44-0743 Axle Hub Kit
28-0073 Rubber Set (4)
Parts for Indian. Stainless Steel Spoke Sets

49-3007 Large Auxiliary Seat Spring Chrome features 40 spokes and
49-3024 Front Axle 1946-48 nipples.
49-3025 Front Axle 1950-53 VT No. Type
49-3026 Front Axle Sleeve 1946-48 45-0491 Front
49-3027 Front Axle Sleeve 1950-53 45-0492 Rear
49-3040 Small Auxiliary Seat Spring Linkert Carb.com
49-3042 1946-53 Front Brake Shoe Spring VT No. 48-1394
47-1545
49-3043 Auxiliary Spring Stop
Solo Saddles
VT No. Type
47-1545 1907-1913 Troxel
47-1544 1914-1917 Mesinger
47-1546 Chief Pre 1910 Brooks
824
XL 1957-UP INDEX
A CAPS CONTINUED ENGINE CONTINUED GASKET CONTINUED
ADVANCE UNIT................................950 Axle.............................................1001 Model Motor................................1324 Sealant.......................................1271
AIR CLEANER...........................967-970 Engine............................................830 Mount.....................................944,945 Transmission....................1311,1313
AIR FILTER.....967,968,969,971,972,973 Gas ................................................992 Race/Roller....................................839 GAUGE
ALTERNATOR...................................958 Oil..................................................998 Seal List..............................1315,1316 Covers............................................988
Conversion.....................................958 CARBURETOR Sealant.........................................1271 Oil...........................................995,999
Rotor..............................................955 Bendix............................................976 Stand.............................................855 Speedo/Tachometer..............985-987
AXLE..............................1000,1001,1002 CV Keihin.......................................977 Spacer List..................................1320 GENERATOR....................................957
Dell’Orto.........................................976 Sprocket.................................882,885 GOGGLES.......................................1271
B
Jet..........................................977-980 Trim/Cover....................................834 GRIP.......................................1081-1087
BACKREST.......................................915 Mikuni.............................................979 EXHAUST....................................930-943
BAFFLE......................................938,943 S&S .............................................980 Baffle......................................933,943 H
BATTERY..........................................965 CASE HANDLEBAR
Clamp/Bracket...934,935,937,938,942
BEARING...........................................912 Bolts..............................................838 Coating....................................317,930 Control....1039,1044,1045,1046,1047
Cam...............................................840 Race/Rollers.................................839 End Tips.................................930,934 Damper.......................................1035
Fork Stem......................................912 CHAIN End Plug........................................981
Enrichment Device.................930,931
Pinion......................................840,841 Adjuster/Tensioner.........................883 Flange............................................944 Throttle Kits...................................981
Wheel..........................................1003 Guard............................................885 Gasket....................................938,943 HANDLEBAR GRIP...............1081-1087
BELT DRIVE.....................................885 Primary..........................................885 Header Clamp...............................942 HARDTAIL.........................................929
Belt ................................................884 CHARGING SYSTEM.........................954 Heat Shield.............................937,941 HARDWARE KIT...............................837
Guard/Dress Up......................885,916 CHOKE CABLE.................................984 Port Replacement........................1265 HEAD...................................852,853,854
BOLT LIST......................................1319 CIRCUIT BREAKER..........................963 Taper Valve...................................943 Gasket...........................................859
BOOK.....................................1268-1270 CLAMP Remanufacture............................1264
Torque Kit...............................938,940
BRAKE Resurfacing..................................1261
Brake.............................................985 EXTENDED REACH..........................887
Banjo......................................901,902 Cable.............................................984 HEADLAMP.........1090,1093,1094-1109
Cable.............................................985 F Bates............................................1103
Header...........................................942
Caliper Front...................894,896,897 Intake Manifold...............................973 FENDER ..............................917,918,919 Bracket.............1097,1104,1107,1108
Caliper Rear...........................890,891 CLEANERS/POLISH.......................1271 Lamp.............................................918 Bulb........1095,1097,1105,1106,1107
Disc..........................896,897,898,899 CLUTCH ..............................876-879,880 Mud Flap/Extension......................919 Connector...........................1096,1106
Disc Brake Pad..............................900 1971 and earlier......................877,878 Spring Fork.................291,1218,1224 Cycle Ray...........................1094,1096
Drum Brake ...........................893,895 1971-84..................................876,879 Struts/Bolts....................................920 HID.....................................1096,1105
Forward Control......................887-888 1985-90..........................................876 Trim/Tip.........................................917 Spotlamp............................1109-1114
Hose..............................................901 1991-up..........................................876 FILTER Spring Fork........................1096-1097
Lever(Handle)................................891 Cable......................................878,983 Air.......967,968,969,971,970,972,973 Trim/Visor/Ring.........1094,1100,1103
Line................................................903 Control(Lever).....................1036-1039 Fuel.............................................1199 HEATSHIELD....................................941
Master Cylinder(Front)......................... Earlier............................................878 Oil...........................................998,999 HELICOIL
.........................1040,1044,1045,1048 Forward Control.....................887-890 FLASHER........................................1163 Installation Service.......................1264
Master Cylinder (Rear)..................895 Hub.........................................878,879 FLYWHEEL.................................838,839 HORN...............................................1169
Mechanical.....................................894 Pressure Plate........................879,880 FOOTPEG Bracket........................................1169
Pedal......................................889,890 Shifter Lever..................................886 Mount............................................914 HOSE/LINE......................................1198
Pedal Pad/Peg.....................889,1071 COIL .....................................944,946,954 Relocation.....................................914 HUB.........................................1001,1003
Rod................................................887 CONDENSER....................950,951,1303 FORK .........................................904-912 I
Rotor/Disc................896,897,898,899 CONNECTING ROD..........................839 Boot/Cover...............908,906-908,911 IGNITION....................................950-954
XL
Spring Fork.......1216,1217,1218,1279 CRANK PIN........................................839 Brace.............................................904 Advance Unit.................................950
Sprocket.................................882,885 CRANKSHAFT..................................839 Damper..........................................910 Booster...........................................951
Switch............................................895 Balance Service..........................1263 Leg Bushing.................................1265 Coil.........................................946,953
Tee/Tube/Fittings....................900,901 Leg Internal Conversion................914
CYLINDER Condenser..............................951,955
Wheel/Drum Brake Kit...................891 Big Bore Kit...................................853 Lock Tab Listing...........................1317 Controller................................951,954
BREATHER.......................................855 Gasket......................853,854,859,860 Neck..............................................911 Cover(Points)................................949
Upgrade Kit...................................855 Head...............................853,854,855 Oil................................................1272 Kits..................................950,952,953
Valve Service...............................1265 Plug(Top)......................................909
D Magneto..............................1303-1306
BUCKLES...........849,852,854,959,1325 Riser...................................1028-1035
Module....................................950,954
BUSHING LIST................................1307 DERBY..............................................830 Seal .............................................911 Points......................................950,951
DIAGNOSTIC....................................954 Slider.............................................908
C Spark Plug..............................947,948
DIPSTICK..........................................995 Spring...........................................909
CABLE Timing Plug...................................949
DISTRIBUTOR .................................957 Spring Fork.......1215,1216,1217,1218
Battery...........................................965 DOWEL PIN LIST...........................1316 Spring Fork Rebuild.....................1265 Tune Up.........................................951
Brake.............................................984 DRAIN PLUG Vacuum Switch..............................948
Stabilizer.................................905,906
Choke............................................984 Engine...........................................870 Stem Nut/Cover.............................906 INDICATOR LAMP............................988
Clamp............................962,984,1197 Fork...............................................910 Triple Tree..............................906,911 INSPECTION TAG...........................1119
Clutch.............................................983 Oil..................................................996 Tube..............................................908 INSPECTION COVER.................828,832
Fittings..........................................1197 Transmission.................................870 FORWARD CONTROL...............887-890 INTAKE MANIFOLD..........................974
Idle.................................................982 DRESS UP KIT.............827,828,829,830 FRAME........................................927-928 EFI.................................................974
Speedometer.................................984 ........................831,832,833,834,835,836 J
Oiler Boot......................................982 G
E JETS..................................978-989, 980
Spark Plug..............................947,948 GAS TANK.................................992,994
Tachometer............................986-987 ELECTRICAL Cap....................992,1199-1204,1228 K
Throttle..........................................982 Battery.....................................965,966 Emblem/Decal...................1205-1206 KEY CHAIN/KEY HOLDER.....1324,1325
Wrap..............................................963 Charging........................................954 Filter/Shut Off.....................1196,1198 KEY..................................................1325
CALIPER Circuit Breaker..............................962 Line..............................................1198 KICKSTAND......................................913
Front.......................................896-897 Regulator.......................................956 Mount............................................992 KICK START..............................873-875
Inserts............................................891 Spark Plug..............................947,948 Petcock...............................1193-1195 Conversion Kit.......................873,875
Rear........................................890,891 Starter.....................................961-962 Tank/Dash Kits................989-991,993 Pedal/Arms....................................874
CAM....................................................842 Switch............................................963 GASKET Ratchet...........................................873
Bearing..........................................840 Terminal.........................................964 Cam Cover........................1309,1313 Wiring.............................................965
Bushing Kit....................................840 Wiring.............................................964 Carburetor..................................1313 KROMMET....................1142,1144,1316
Bushing Replace.........................1264 EMBLEM.................................1205-1206 Derby Cover...............................1310 L
Bushing Service............................840 ENGINE Exhaust......................................1310
LAPEL PINS...........................1324,1327
Cover......................................835,843 Bar/Guard/Peg..............................921 Gas Tank Cap............................1312 LENS..............................1134,1136,1155
Cover Bushing Service..................840 Bushing List.................................1307 Manifold.....................................1313 LEVERS
Follower..........................................870 Drain Plug......................................870 Master Cylinder..........................1312 Pin & Bushing...............................985
Gasket/Sealer................................841 Flywheel.........................................838 Oil Pump.............................862,1309 LICENSE HOLDER................1139-1141
CAPS(Chrome)...................830,837,849 Gasket............................................860 Primary.......................832,1309,1313 LIFTER BASE....................................853
Heads.....................................853-855 Tail Lamp...................................1313
LIFTS................................................1273
825
LIGHTS PLUGS CONTINUED SPROCKET CONTINUED WIRING CONTINUED
Bar...............................................1150 Timing............................................949 Offset......................................882,885 Shrink Wrap...................................963
Bulbs......1094,1095,1096,1097,1098, Transmission...........................865,870 Rear...............................................882 Spark Plug.....................................947
........................1101,1137-1138,1165 POINTS........................................950,951 Shaft..............................................840 Switch............................................963
Fender.......................1126-1129,1166 Cover.............................................949 STARTER............................959,960,962 Terminal/Connectors...964,1299-1301
Gasket.........................................1162 POLISH/CLEANERS........................1271 Cover.....................................959,961 Tail Lamp......................................964
Headlamp...........................1092-1108 PRIMARY Drives............................................961 Tie Strap.......................................964
Indicator..............................1104,1165 Chain.............................................881 Housing.........................................961 WRIST PIN...........................839,856,857
Marker..............1145-1148,1151,1154 Cover/Trim.............................828-830 Relay.............................................960 X
Reflector......................................1166 Derby.............................................830 Solenoid........................................961
XL TOOLS..........................................925
Signal........................1154-1165,1218 Dress Up Kits..827,828,829,831,832,833 STATOR ............................................955
Spotlamp............................1109-1114 Inspection (Cover).........................828 STRUT................................................920
Tachometer/Speedometer..........1165 PULLEY STUD LIST.......................................1317
Tail Lamp...........................1115-1135 Cover......................................884,916 SUSPENSION............................922-924
Turn Signal.........................1152-1161 Guard............................................885 SWING ARM...............................926,927
LOCK TAB LIST..............................1317 PUSHROD.........................................844 SWITCH
LOWERING KIT.................................923 Cover............................................845 Brake.............................................895
LUGGAGE RACK....................914,1009 Engine...........................................844 Handlebar...........................1042,1043
M R Ignition............................................963
Oil Pressure...................................862
MAGNETO..............................1303-1306 RACE.................................................840
Repair...........................................1047
MAINSHAFT........................863,865,867 RAIL...................................................915
Vacuum.........................................948
MANIFOLD.................................974,975 REGISTRATION HOLDER.............1174
TACHOMETER...........................986-987
MANUALS..............838,1268,1269,1270 REGULATOR/RELAY.......................956
Cable/Gear....................................983
MASTER CYLINDER Covers...........................................956-
TAIL LAMP.............................1115-1136
Cover/Gasket...............................894 RINGS ................................................862
Assemblies.........................1115-1136
Front................1044,1045,1047,1048 RISER.....................................1028-1035
Bulb.............................................1138
Rear.............................................894 ROCKER
Connector....................................1138
Rebuild.........................................894 Arm................................................846
Fender Mount...........1116,1126-1129
MIRROR................................1173-1192 Cover/Trim.............................836,846
Lens...................................1135-1136
MODULE............................................954 End Caps.......................................846
License Bracket.1115,1139,1140,1141
MOTOR SHOP SERVICES Gasket.....................................836,846
Side Mount........................1121-1128
Cam Bushing Service............840,1264 ROD
Tombstone................1129,1131,1132
Alternator Ring Replacement.......1263 Brake.............................................895
Vintage....1128,1129-1132,1133,1134
Cam Bushing XL….............844,1264 Connecting....................................849
Wiring...........................................1138
Crankshaft Balance....................1263 Clutch............................................878
TAPPET ...............................831,844,847
Cylinder Boring..........................1260 ROLLER PIN LIST...........................1316
Base Cover............................831,848
Cylinder Sleeving.......................1260 ROLLER.............................................839
THROTTLE........................................981
Flywheel Balancing....................1262 S TIMING...............................................948
Flywheel Remanufacture...........1261
SADDLEBAG...................................1007 TIRE........................................1210-1212
Fork Leg Bushing Install............1265
SCREW LIST...................................1322 Tube............................................1213
Fork Leg Internal Conversion....1265
SEAL LIST..............................1315,1316 Valve Stems................................1213
5 Speed Rebuild........................1265
SEALANT........................................1271 TOOL
Head Remanufacture.................1269
SEAT..............................1006-1007,1008 Kit................................................1009
Head Resurface.........................1264
SERVICE MANUAL.838,1269,1268,1270 XL..................................................925
Mainshaft Assemblies................1267
SHAFT TRANSMISSION.................864-876,869
Magneto Rebuild........................1304
Motor Sprocket...............................883 Countershaft..................................868
Spark Plug Helicoil Service.......1264
Pinion...............................840,841,925 Door...............................................870
Valve Seat Service.....................1265
Rocker Arm...................................846 Drain Plug......................................865
Wheel Truing/Build….................1265
Shift Fork.......................................870 Mainshaft.......................................877
MUD FLAP.........................................919
SHIFT.................................................870 Pawl...............................................870
N Cam Follower................................870 TRIPLE TREE....................................905
NECK CUP KIT.................................912 Fork...............................................870 Conversion Kit...............................906
NUT LIST................................1321,1322 Lever.............................................886 Spring Fork.................................1216
O Linkage/Rod..................................887 Stem Nut.......................................917
Peg................................................886 TUBE (Tire)......................................1213
OIL
Shaft..............................................869 TUNE UP...........................................951
Cap................................................996
SHIM LIST.................................862,1307 Advance Unit................................950
Cooler............................................994
SHOCK.......................................923,924 V
Cover(Tank)............................996,997
SHOP SERVICES...................1260-1265
Dipstick..........................................995 VALVE.........................................848,849
SHOW BIKE BOLT KIT......................837
Filter........................................998,999 Guide............................................850
SISSY BAR/PAD.............915,1254,1258
Gauge..........................................1000 Keepers.........................................851
SLIDER..............................................908
Line .............................................862 Seal...............................................851
SOLENOID.........................................961
Pressure Switch/Pressure......861,862 Seat Service.................................1264
SKULL STUFF........................1012-1016
Pump.............................................862 Seat........................................848,849
SPACER LIST..................................1320
Seal List.........................................862 Springs/Collar/Key........................851
SPARK PLUG....................................948
Tank.........................927,928,996-997 VELOCITY STACK............................968
Helicoil Replacement..........1265,1298
P VOLT REGULATOR..........................956
SPEEDOMETER.........................986,987
PATCHES (CLOTH).....1323,1326,1328 Brackets..................................987,988 W
PARTS MANUAL....................1268-1270 Cable.............................................984 WHEEL...................................1004,1005
PEGS......................................1055-1072 Drive Unit.......................................984 Adjuster........................................1003
PETCOCK..............................1193-1195 Sensor/Sending.............................984 Axle....................................1001,1002
PILLION PAD...................................1254 SPOKE.............................................1005 Building and Truing.....................1265
PIN LIST...........................................1316 SPOOL WHEEL.....................1214-1215 Hub..............................................1001
PINION.................................840,841,924 SPOTLAMP.............................1109-1114 Rim..............................................1005
PIPES..........................................930-940 SPRING FORK.......................1216-1219 Spoke..........................................1005
PISTON.......................................856,857 SPRING FORK REBUILD...............1265 Spool..................................1214-1215
PLUGS SPROCKET WINDSHIELD...................................1010
End Plug (Handlebar).....................981 Chain Conversion..........................885 WIRING
Fork...............................................909 Compensating................................884 Enrichment Device..................930,931
Magnetic...............................870,996 Cover...............................871,872,873 Fuse..............................................963
Oil Tank.................................995,996 Drive..............................................882 Handlebar...........................1043,1047
Spark Plug..............................940,941 Motor.............................................883 Harness.........................................964
826
2004-up
42-0947 Cover Trim Rocker
Box
Cover
Trim
Sprocket Cover
Dress Up
Cam Cover
Trim
Kit
1991-2003 Primary Cover Trim
42-0799
Rocker
Box
Cover
Trim
Shift Lever
XL
Cam
Cover
Sprocket Cover Trim Trim
Master Cylinder Cover Brake Pedal

V-Twin Chrome Dress Up Kits include chrome primary cover trim, cam cover trim, rocker box cover trim, master cylinder cover
and chrome sprocket cover. Also included is chrome brake pedal and chrome shift lever to add a finished touch. Note: 2004-up
models require purchase of primary derby cover available separately.
VT No. Item Year
42-0799 With Brake/Shift Pedal 1991-03
42-0846 Without Brake/Shift Pedal 1991-03
42-0947 Without Brake/Shift Pedal 2004-up
Left Side
1991-2003 Right Side
827
1991-2003 Primary 1994-2003 Kit
43-0235
Cover
42-0234
Easy
Installation!
Outer Primary Covers available as cover only or kit which

includes cover, allen screw set, inspection covers and gasket.
Chrome Black Kit OEM Year
Cover Cover
43-0221 — 43-0234 25430-89 1991-93
43-0220 43-0375 43-0235 25460-94 1994-03
Chrome Inspection Cover Set for 1991-93 models.
Form Fitting Chrome Steel Covers fit over stock primary covers to mirror the contour VT No. Item
for a skin tight fit. Covers are held in place by existing hardware. Installation takes less 37-8992 Cover Set 37-8992
than 10 minutes. 42-0868 Cap, each
14-0917 O-Ring for Cover
V-Twin Cover Trim
37-8701 Screws, chrome
14-0547 O-Ring for Screws
Chrome Chain Inspection Cover fit 1994-2003
models.
VT No. OEM Item
42-0756 34761-94 Chain Cover Inspection
14-0917 11188 O-Rings for Above
42-0756 37-8701 41191-74 Screws for Above
42-0757 42-0951 42-0678
42-0750 Installed
42-1018 42-1019
42-0750
Clutch Inspection Covers for 1994-2003.

VT No. Style Year
42-0757 Smooth 1994-03
42-0951 Eagle Spirit 1994-03
42-0678 Raised Chrome Skull 1994-03
42-1018 Skull 1994-03
42-1019 Flame 1994-03
42-0996 42-0482 Black
14-0570 O-Ring For Above, 25463-94
Chrome Primary Cover Trim fully covers the existing alumi-
num primary and is secured in place by the 5 of the existing 42-0360
screws. 1994-2003 type available as cover with choice of
derby as listed on this page. 42-0996 requires the re-installa-
tion of clutch cable for installation and purchase of derby.
VT No. Year Type
42-0750 1991-03 Full
42-0996 1994-03 Open Derby
42-0360 1991-03 Black
828
Primary Covers
43-0220 43-0375
42-0353
43-0287 43-0285
42-0789
43-0372 42-0996
42-0939
42-0359
Outer Primary Cover for XL. Order hardware, derby cover and Rocker Box Top Cover includes D-ring kit.
gaskets separately. Black Chrome Fits Pieces
42-0360 42-0362 42-0789 1986-1990 4
Chrome Black Fits
43-0220 43-0375 1994-03 42-0363 42-0946 1986-2003 4
43-0287 2004-06 42-0352 42-1063 2004-2006 4
43-0285 43-0372 2007-up 42-0353 42-0364 2007-2012 4
42-0996 42-0360 Primary Cover Trim, 1994-2003
42-0939 42-0359 Primary Cover Trim, 2004-up 43-0463 43-0464
XL
42-0933 42-0357 42-9975
42-0358 43-0185 43-0149

Black Finish Outer Primary Cover
VT No. OEM Fits
43-0463 2004-05
43-0464 25307-06 2006-up
42-0845 42-0383 42-0930 Engine Dress Kit

42-0690
42-0384
Chrome Black Item

42-0933 42-0357 Cam Cover Trim
42-9975 42-0358 Cam Cover Trim
43-0185 43-0329 Sprocket Cover
43-0149 43-0330 Sprocket Cover
42-0845 42-0383 Transmission Sprocket Cover Trim
42-0930 42-0384 Transmission Sprocket Cover Dress Kits for XL’s include all die cast replacement parts as
Die Cast Primary Covers are manufactured from a casting process. It is the nature of parts produced from this
process to have small random subsurface imperfections that can be uncovered during the polishing process. pictured.
These may appear as very small cosmetic imperfections after chrome plating. We also do not polish in areas that
are not readily visible once assembled on the motorcycle or by polishing machines such as small depressions or
VT No. Year
tight corners. As these conditions are common in polished and chrome-plated castings, a reasonable standard of
acceptability has been established to bring you the highest quality product at an affordable price. This part meets
42-0690 1994-03
Perma Chrome™ cosmetic standard. The aforementioned cosmetic conditions are considered reasonable for this 42-1055 1991-93
part and are not considered warrantable.
829
2004-up Primary Cover
Form Fitting Chrome Steel Covers fit over stock primary
43-0275 covers to mirror the contour for a skin tight fit. Covers are held in
place by existing hardware. Installation takes less than 10 minutes.
42-0939 42-0359
Outer Primary Covers available as chrome cover only or kit

which includes chrome cover, chrome allen screw set, inspec-
tion covers and gasket. **Note: Black Wrinkle Finish. 2004-up XL Trim bolts over existing stock primary cover. Order
Chrome Cover Black Cover Kit OEM Year inspection and derby cover separately. Clutch cable must be
43-0263 — 43-0275 25460-04 2004-05 removed and reinstalled for installation.
43-0287* — — 25460-04 2004-05 Chrome Black Item
43-0462 43-0464** — 25460-06 2006-up 42-0939 42-0359 Cover
43-0285* — 43-0284 25539-06 2006-up 37-1201 — Screw Set
— 43-0372
*Note: Perma Chrome Brand
— 2007-up
Snap Cap ™
Easy to Install!
42-0713 42-0728 42-0967 42-1017

37-9532 37-9533
Chrome Bolt Cap Cover Kit for Sportster.
VT No. Model Kit Quantity
37-9532 2004-up 77
37-9534 2004-up Engine 63
42-1045 42-1266 42-0192 42-0193 37-9533 1984-03 74
These bolt cover kits will make any bike look great and are also
for custom builders use. Easy to install these new kits have
beautifully designed pieces to cover the raw OE bolt heads
on engine, transmission, primary and more, each kit includes
detailed instruction for installation on each model as listed, all
42-0468 42-0469 42-1378 covers in each kit are individually packed and numbers for iden-
2004-up Derby Covers are chrome except 42-0713 which is tification. Installation has never been easier.
gold inlay. 300 Piece Assortment!
VT No. Style VT No. 37-1505
42-0713 Eagle Spirit, Gold
42-0728 Eagle Spirit, Chrome
42-0967 Smooth 37-1505
42-0968
42-1017 Flame
42-1045 USA
42-1266 Chrome skull 37-1502 37-1503
37-1504
42-0192 Chrome, smooth
42-0193 Black, smooth
42-0468 Chrome with chrome flame
42-0469 Black with chrome flame
42-0968 Inspection Cover
42-1374 Chrome Air Flow
42-1378 Black Air Flow Chrome Caps snap on knurled allen screws for ease of instal-
lation. Packs of 100. • Snap On
VT No. Fits
37-1502 ¹⁄₄” • Tight Fit
37-1503 ⁵₁₆” • Easy Installation
37-1504 ³₈” • Universal Use
37-1505 Assortment
830
1986-90 Dress Up Kit
43-0316
Rocker Box
Cover Trim
Primary
Cover
Left Side
Shift Lever
Cam Cover
Trim
Sprocket
Cover Master Cylinder Cover Right Side
Brake Pedal
42-8690
V-Twin Chrome Dress Kits for 1986-90 XL models includes

chrome primary cover with inspection covers, cam, rocker box,
master cylinder and sprocket covers. Also included is chrome brake
pedal and chrome shift lever to add a finished touch. Hardware for
installation included.
VT No. Type
43-0316 With brake/shifter pedal
42-0847 Without brake/shifter pedal
XL
42-8690 With brake/shifter
Die Cast Primary Covers are manufactured from a casting process. It is the nature of parts produced from this process to have small random subsurface imperfections
that can be uncovered during the polishing process. These may appear as very small cosmetic imperfections after chrome plating. We also do not polish in areas that
are not readily visible once assembled on the motorcycle or by polishing machines such as small depressions or tight corners. As these conditions are common in pol-
ished and chrome-plated castings, a reasonable standard of acceptability has been established to bring you the highest quality product at an affordable price. This part
meets Perma Chrome™ cosmetic standard. The aforementioned cosmetic conditions are considered reasonable for this part and are not considered warrantable.
Tappet Base Cover

Chrome Tappet Base Cover
42-1171 42-1171 Installed is die cast one piece covering
the area from the pushrod
tube base to the cam cover.
Fits 1991-2003.
42-0447 VT No. 42-0447
Chrome Tappet Bar Base

Chrome Cylinder Base Cover fits the area cylinder base on Cover. Fits 2004-up XL.
left side of engine. Fits 2004-up. VT No. Item
VT No. 42-1171 10-0565 Base Set
2224-8 Screw Set
Chrome Tappet Covers fit 15-1273 Gasket and Pushrod
1986-90, four piece. Presses Tube O-Ring Kit
onto tappet block. Chrome Tappet Block Cover Set
VT No. 42-0113 features contour for perfect fit over
existing stock style lifter blocks,
securely held in place by 4 chrome
allen screws supplied. Pushrods
must be removed for installation.
Original design by Motoy-CycleTM
Accessories. 1957-85 XLH-XLCH.
VT No. 42-0115
831
1986-90 15-0624 15-0625
Primary Cover
43-0128 43-0087 43-0210
15-0627 15-0674
Outer Primary Covers available

43-0236 as cover only or kit which includes
chrome cover, chrome allen screw
set, inspection covers and gasket.
15-0698 15-0880
Replaces 25430-86.
VT No. Item Finish
43-0128 Cover Black
43-0087 Cover Polished
43-0210 Cover Chrome
43-0128R Cover Raw
43-0236 Kit Chrome Primary Cover Gasket Kit includes gaskets and small parts for
43-0371 Cover Black left side repairs. Available with paper type primary cover gasket
or aluminum rubber coating primary gasket.
Rubber Paper Fits
15-1639 15-0624 1967-76 XLH 1971-76 XLCH
37-8991 37-8690 15-1640 15-0625 1977-79 All
15-1641 15-0627 1980-89 All
Chrome Inspection Cover Set for clutch and chain on primary
— 15-0674 1990
cover for 1986-90.
15-1643 15-0698 1991-2003 All
VT No. Colony U/M Style
15-1644 15-0880* 2004-up
37-8690 — Pair Stock
*Note: Paper with Silicone Beaded Primary Cover Gasket
37-8687 — Pair Polished
James
37-8991 — Pair Hex
15-1428 1967-76 XL
8776-2T 8776-2 Each Hex
15-0873 1977-90 XLH-XLCH
— 2558-1 Each Allen
15-1429
Primary Hardware
As Above Foamet® with Silicone Bead
15-0874 1991-2003 All XL
15-1427 As Above Foamet® with Silicone Bead
Screw Sets for Sportsters 15-0881 2004-up XL
15-0307
Primary Cover Gaskets.
Stock Screw Acorn Screw Allen Screw GB No. James OEM Fits
15-0388 15-1398 34955-04 2004-up Primary Cover
15-0056 15-1399 As Above Metal with foam rubber coating
15-0143 15-0913 34955-89A 1991-2003 XL Primary Cover
15-0647 15-1154 34955-89X 1991-2003 XL Primary Cover
with Bead (.030”)
8788-11T 9749-11T 15-0057 — As Above Metal with foam rubber coating
Primary Screw Sets for Sportsters. — 15-1423 As Above Foamet® with Bead
Chrome Cadmium Type Years Model 15-0646 15-1153 34955-75X 1977-90 XL/XR 1000 Primary
9852-5 9853-5 Stock 1952-56 K Cover with Bead (.030”)
— 9851-5 Stock 1957-66 XL-XLH 15-0170 15-0912 34955-75 1977-90 Primary Cover
8890-20 8891-20 Stock 1964-69 XLCH 15-0058 — As Above Metal with foam rubber coating
8892-12 8893-12 Stock 1967-70 XLH — 15-1425 As Above Foamet® with Silicone Bead
9753-9 — Allen 1957-69 XLCH 15-0211 — 34624-77 1977-90 Footpeg Stud
8785-12 — Allen 1971-76 XLCH-XLH 15-0169 15-0911 34955-67A 1967-76 XL Primary Cover
8785-12T — Allen 1971-76 XLCH-XLH 15-0406 — As Above With Silicone Bead
8788-11 — Allen 1977-85 XLCH-XLH — 15-1424 As Above Foamet® with Silicone Bead
8788-11T — Allen 1977-85 XLCH-XLH 15-0168 15-1042 34952-52A 1952-69 XL Primary Cover
9749-11T — Allen 1986-90 XL 15-1215 — 52-69 XL Primary Cover Thick
9767-15 — Allen 1991-93 XL 15-1540 — 34986-04 2004-up Inspection Cover
9767-15T — Allen 1991-93 XL 15-0190 15-1046 35169-52 1952-84 Mainshaft Plate
9769-17 — Allen 1994-2003 XL 15-0212 15-1053 37762-52 1954-70 Clutch Cover
9769-17T — Allen 1994-2003 XL 15-0178 15-0920 60567-36 1958-69 Inspection Cover
2220-24 — Allen 2004-up XL 15-0663 — 63858-49 1984-98 Evolution Rocker
9768-15 — Acorn 1991-93 Evolution XL’s Cover Bolt Washer
832
1971-85 Dress Up Kit
V-Twin Dress Up Chrome Engine Dress Up Kits for XL’s.
1971-83 type kits include primary cover with plugs, sprocket/kicker
cover and cam cover trim. Chrome hardware is included to facilitate
assembly. Rocker boxes are not included.
VT No. Years Model Starter
43-0310 1971-76 XLCH Kick
43-0311 1971-76 XLH Kick and Electric
43-0312 1977-78 XLCH Kick
43-0313 1977-78 XLH Kick and Electric
43-0317 1979 XLH Kick and Electric
43-0314 1980 XLH Electric
43-0315 1981-82 XLH Electric
43-0318 1984-85 XLH Electric with Alternator
12-0318 1977-78 XLH Needle Bearing for outer primary cover
12-0395 1967-75 XLH Needle Bearing for outer primary cover
1971-85 Primary Cover Kit

43-0227 43-0226 43-0237 43-0238
XLH-XLCH Outer Primary Covers available as cover only.

VT No. 43-0328 fits Iron Head models with alternator in clutch
drum.
VT No. OEM Finish Fits 43-0225
43-0227 34949-75A Chrome 1977-83
43-0105 34949-75A Polish 1977-83
XL
43-0328 25430-84 Chrome 1984-85 Chrome Primary Cover Kits for 1971-83 XLH-XLCH models.
43-0225 34949-71 Polish 1971-76 Kits include chrome die cast outer primary cover with bearing
43-0226 34949-71 Chrome 1971-76 installed, inspection cover, clutch adjuster cover, gasket and
Inspection Plugs chrome allen screw set.
VT No. Years Fits
43-0237 1971-76 Generator
43-0238 1977-83 Generator
Stock Type
43-0254 1984-85 Alternator
Hex Type 37-8999 37-0050 12-0318 1977-78 XL Needle Bearing for outer primary cover
Primary Cover Chrome Caps for 1971-84. Available as sets 12-0395 1967-75 XL Needle Bearing for outer primary cover
or each, in stock, slotted or hex design. Primary Cover Inserts fea-
1952-70 Chrome Stock Style. ture adhesive back. Fits 1971-
Set Each Fits
— 37-0451 Filler, Alloy 76. VT No. 48-1985
— 37-0452 Filler, Chrome Inserts for 1971-76 Primary are
1971-76 Hex Type. chrome steel with double-stick
Set Each Fits adhesive strip to fit in recess in
37-8999 — Filler Cap and Clutch Adjuster
aluminum primary cover, sold each.
— 7600-4 Filler Cap
— 7600-4T Filler Cap VT No. 42-0609
Primary Cover is con-
—
37-1276
2559-1 Filler
— Filler Cap and Clutch Adjuster
1958-69 structed of stamped
— 7601-2 Clutch Adjuster steel. Inspection cover
— 7601-2T Clutch Adjuster included. Replaces
— 2557-1 Clutch Adjuster 34949-64. Fits 1958-69
— 2879-1 Filler Cap and Clutch Adjuster
XLCH. VT No. 42-0700
1971-76 Chrome Stock Style.
Set Each Fits
37-0050 — Filler and Clutch Adjuster Die Cast Primary Covers are manufactured from a casting process. It is the nature of parts pro-
37-7176 — Set duced from this process to have small random subsurface imperfections that can be uncovered
37-7276 — Set, Polished during the polishing process. These may appear as very small cosmetic imperfections after
chrome plating. We also do not polish in areas that are not readily visible once assembled on
37-7376 — Set, Chrome the motorcycle or by polishing machines such as small depressions or tight corners. As these
conditions are common in polished and chrome-plated castings, a reasonable standard of
1977-84 Hex Type acceptability has been established to bring you the highest quality product at an affordable price.
37-8989 — Filler Cap and Clutch Adjuster This part meets Perma-ChromeTM cosmetic standard. The aforementioned cosmetic conditions
are considered reasonable for this part and are not considered warrantable.
— 7809-2T Filler Cap and Clutch Adjuster
— 7809-2 Filler Cap and Clutch Adjuster
1977-84 Chrome Stock Style. 833
37-7784 — Filler and Clutch Adjuster
Dress Up Kit
42-0894
1971-76 Kick
42-0896
1977-78
Kick
42-0932 Installed
42-0932
2004-up Electric 42-0895
42-0680,
42-0658
42-0899
1977-78
Electric
V-TwinTM Dress Up Kit fits right side on XL models. 1983-03 kits
include chrome steel cam cover trim, chrome die cast sprocket
cover, chrome master cylinder cover and hardware.1980-82 kits
include chrome sprocket cover, chrome master cylinder and cam
cover trim with hardware. 1971-78 kits include chrome sprocket
cover and cam cover trim with hardware. 2004-up kit includes 42-0914
chrome dress trim to fit over sprocket and cam cover. 1979
42-0894 1971-76 Chain Kick Kick and Electric
42-0898 1971-76 Chain Electric
42-0895 1971-76 Chain Kick and Electric
42-0896 1977-78 Chain Kick
42-0897 1977-78 Chain Kick and Electric
42-0914 1979 Chain Kick and Electric
42-0680 1980 Chain Electric 42-0650,
42-0658 1981-82 Chain Electric Electric
42-0651 1991-2003 Belt and Chain Electric
42-0932 2004-up Belt Electric
42-0840 42-0843 42-0845 42-0930

Sprocket Cover Trim fits over existing cover for XL’s as noted. 42-0651
Chrome Black Years 42-0383 42-0384
42-0840 1986-90
42-0843 1981-85
42-0845 42-0383 1991-2003
42-0930 42-0384 2004-up
834
Chrome Trim
43-0388 43-0389
27-0832 27-0833
42-1050 42-1051
42-1052
Outlaw Front Pulley Cover Guard and Pulley Cover. Outlaw

Front Pulley Cover replaces stock pulley cover for a high per-
Dress Up Set features brilliant chrome covers to fit over orig- formance look. Outlaw Pulley Cover adds the finishing touch by
inals aluminum covers which are formed to mirror the contour filling in the center of pulley for a clean detailed look. Available
for a skin tight fit. Order derby, and points cover separately for in either black or chrome finish. Fits 2004-up XL.
42-1052 and 42-1051. Chrome Black
VT No. Year 43-0388 43-0389 Pulley Cover Kit
42-1050 1991-03 27-0832 27-0833 Pulley Cover Guard Kit
42-1052* 1991-03
42-1051 2004-up
*Note: Open Derby Access
Chrome Right Side Cam
43-0450 42-0138 42-0137
Cover/Sprocket Cover Set
for XL’s includes both piec-
es with gasket and chrome 42-0138 42-0137
XL
Installed Installed
allen screws for assembly.
VT No. Year
43-0449 1986-90
43-0450 1991-03
Cam Cover Trim installs over original cover for 2004-up XL.
VT No. Finish
42-0138 Alloy
42-0137 Black
Cam Cover Trim

Chrome
42-9963 Steel Covers Cam Cover
for XL! Trim
Installed
on 1998
XLH
42-9962
Form Fitting Chrome Steel Covers fit over stock cam cases
on XL models. No need to remove cam case or disturb cams
or gears. Covers held in place by existing screws and related
42-9975 hardware as supplied. Note: 42-9962 is kickstart only. All other
42-0933 numbers are for electric start.
VT No. Fits
42-9961 1971-78
42-9962 1971-78
42-9968 1979-80
42-9963 1981-82
42-0110 1983-90
42-9968 42-9975 1991-03
42-0110
42-0933 2004-up
835
1986-up Rocker Box Dress Cover Set
Rocker Covers 42-0796
Rocker Box Dress Cover Sets fits over rocker box assembly
without disassembly of engine. Allen screws included. Fits
1986-up.
VT No. Finish
42-0789 42-0796 Chrome
42-0139 Black
42-0788 42-0368
42-0363
Rocker Box Top Cover includes D-ring four piece kit.
Chrome Black Fits
42-0352 42-0353
42-0789 42-0362 1986-1990
42-0946 42-0363 1991-2003
2004-up Top
Rocker Cover
Set.
VT No. 10-0566
Rocker Cover Sets. Kits include gaskets for both heads.

Chrome Black Fits Pieces
Chrome Lower Rocker Box 42-0788 — 1986-1990 6
and Gasket Kit fits 1991-03 42-0792 42-0368 1991-2003 6
models. 42-5520 42-0352 2004-2006 4
VT No. 42-0220 42-1063 — 2004-2006 4
42-5524 42-0353 2007-up 4
42-0364 — 2007-up 4
8868-16 8931-16 9788-24

43-0151
Chrome Rocker Cover Screw Kits in acorn or allen type for
1986-up.
VT No. Type
8868-16 Acorn
8931-16 Allen
9788-24 Button Head Allen
Sifton Rocker Box Breather Upgrade Kit
10-0579
includes tap, drill bit, breather tubes and
instructions. Fits 1992-03 Evolution. Chrome Rocker Box Covers for 1986-up models.
VT No. 16-0916 VT No. OEM Item Finish Fits
43-0151 17501-86 Top Cover Smooth 1986-03
10-0566 17551-04 Top Cover Finned 2004-up
10-0579 Top Cover Smooth 2004-up
11-0585 17533-90 D-Ring 1991-03
43-9130 17533-86 D-Ring 1986-90
836
8315 CAD
Hardware Kit
• Snap On
• Tight Fit
• Easy Installation
37-9533
Stock Style Hardware Kit contains all the stock engine nuts, 37-9532
bolts, washers and studs for the engine in choice of chrome
or cadmium plating. Kit includes primary cover screws, lifter
base screws, timing plug, cam cover screws, cylinder base nuts
and washers, generator screws, head bolts and washers as
Chrome Bolt Cap Cover Kit for Sportster
required for each application.
VT No. Model Kit Quantity
Chrome Cadmium Fits
37-9532 2004-up 77
— 8315 CAD 1957-66 XLH
37-9534 2004-up Engine 63
8316 CHR 8316 CAD 1957-69 XLCH
37-9545 2004-up 109
— 8317 CAD 1967-70 XLH, 1970 XLCH
37-9533 1984-03 74
— 8319 CAD 1971-73 XLH-XLCH
These new bolt cover kits will make any bike look great and
— 8320 CAD 1974-76 XLH-XLCH
are also for custom builders use. Easy to install these new
8321 CHR 8321 CAD 1977-80 XLH-XLCH kits have beautifully designed pieces to cover the raw OE bolt
Gardner and Wescott Allen Sets heads on engine, transmission, primary and more, each kit
Sportster Polished Chrome includes detailed instruction for installation on each model as
Motor Sets include side cov- listed, all covers in each kit are individually packed and num-
ers, generator, rocker box, bers for identification. Installation has never been easier.
top motor mount, lifter base
and point cover.
VT No. Fits
37-8092 1991-03 Evolution XL
37-2087 1986-90 Evolution XL
XL
37-2089 1977-84¹⁄₂ Sportster
37-2090 1971-76 Sportster
Show Kits.
VT No. Year
37-1201 37-1205 7900-G 1957-64 Gold
1014-P 1991-93 Polished Allen
Chrome Allen Screw Sets fit 2004-up XL’s.
VT No. Fits
37-1201 Primary-Derby
37-1202 Timing Cover
2226-4 Sprocket Cover
37-1204 Tappet Blocks
37-1205 Rocker Box Caps Show Bike Kits in
chrome finish.
VT No. Fits
12-2117 8517 1984-86
Factory Type Studs for stock applications. Evo 4 Speed
VT No. OEM Fits 8518 1985-86
12-2117 24751-75 1975-85 XL Right Front Peg Evo 5 Speed
12-0552 24752-75 1975-85 XL Left Front Foot Peg
12-2111 24811-59A 1965-72 Starter
Cam and Primary Chrome Screw
12-1151 24817-52 1952-81 XL Right Case
Sets include inspection and sprocket
8814-15 24819-52 1954-76 XL Oil Pump Set
screws. By Gardner Wescott.
12-1150 24825-82 1982-up XL Right Case
VT No. Year
18-3123 37584-67 1952-70 XL Clutch Hub
37-8508 1991-up
12-1186 40018-77 1977-85 XL Adjuster Shoe, each
37-8509 1986-90
8813-4 45840-48 1949-76 Glide Leg, pair
37-8510 1977-85
8826-6 45998-73 1973 up Glide Leg, pair
37-8511 1971-76
837
Flywheels
Truett & Osborn Flywheel Sets feature origi-
nal weight right and left sides.
VT No. Fits
10-1012 1957-80
10-1030 1981-85
Case Bolts
9878-13 Engine Case Bolt Kit includes
the necessary hardware to bolt
together the motor cases of the
years listed in cad plated finish.
VT No. Fits
9878-13 1957-76
9879-31 1977-90
Rear Engine Case Studs. Set of 3.
VT No. OEM Years
12-1151 24817-52 1952-81
12-1150 24825-82 1982-90
12-1151 12-1150
Complete Flywheel Assembly is shipped complete, assem-
bled and trued with shafts. Chrome Engine Case Allen Bolt
VT No. OEM Fits Type Kit fasten engine case halves. Fit
10-1130 23900-57A 1957-76 XL Motor Shop 2004-up.
10-1010 23900-75 1977-80 XL S&S VT No. 2217-8
10-1131 As Above Motor Shop Ready
10-1132 23900-75B 1981-85 XL
Motor Shop Ready Service and Parts Manual.
VT No. OEM Years
48-0922 1970-76
48-1719 99484-69 1959-69
Spare Parts Books provide detailed

exploded views and OEM factory numbers
for specific models.
10-0179 VT No. OEM Years
48-0306 — 1954-65
S&S Rods are heavy duty replacement rod sets included 48-1591 99451-93 1993-94
wrist pin bushings, rod races, matched rods, pins, rollers-cag- 48-0953 99451-97 1997
es, and nuts, for stock or stroker use. Use “Heavy Duty” or 48-0677 99451-00A 2000
“Supreme” which is recommended for drag strip applications.
Heavy Duty Supreme Fits
10-0180 10-0194 1981-85 XL XL Product Guide for 100% V-Twin res-
10-0187 — 1986-99 XL-Evolution 883-1200 toration. 288 pages.
8610-1 A B 9402-1 VT No. 48-0499
A. Timing Plug fits all Sportster timing plug holes and oil tanks.
VT No. Finish
8610-1 Chrome
8611-1 Cadmium
B. Allen Style Plug use on all 1970-up replaces 720.
9402-1 Chrome
9403-1 Cadmium
37-9206 Chrome by Gardner-Westcott 48-0598
9960-1 Chrome (Oversize) 48-0587 48-1760 48-0599
XLCH Motor Plaque features 1971 style
Ironhead Sportster. Clymer Repair Manuals for XL’s. Contain tips from engine
VT No. 48-0372 tuning to complete wiring. Features lots of exploded views and
photos, step by step instructions. New editions.
VT No. Years
48-0587 1959-85
48-1760 1986-03
838 48-0598 2004-13
48-0599 2014-17
Rod Assembly Crank Pin
10-2572 10-2573
10-0196
10-0176 Sifton Crank Pin Kit includes crank pin, rod races, standard
rod rollers, and retainers.
VT No. Years
10-2572 1954-Early 81
10-2573 Late 1981-86
10-0550
Crank Pins are made of 8620 steel with .062 heat treated
10-0142
penetration. *Note: One Hole.
Years OEM Jims Eastern V-Twin V-Twin
3 Hole 3-Hole 2-Hole 3-Hole
1954-81 23960-54 10-8359 10-0550 — 10-0552
L1981-99 23960-80A 10-8361 10-0192* 10-1210 —
10-0881 Connecting Rod Race Sets made
from 52100 steel and hardened. Fits
1957-85.
VT No. Size
10-0137 STD
10-0827 .010 Oversize
V-TwinTM Replica Stock Replacement Rod Sets include new Wrist Pin Bushings are available in bronze
XL
rods, crank pin, nuts, cages and standard rollers which are fitted replica type or Sifton Ampco 45 for all XL’s.
and assembled. Piston pin bushings are installed and honed for Replica type sold in pairs. Sifton type sold
stock wrist pin. each.
VT No. OEM Years
10-0176 24275-57 1957-80 Size VT No. Type
10-0196 24275-80 1981-85 STD 10-0760 Replica
10-0142 24275-86A 1986-99 STD 10-0766 Sifton
10-0881 2004-up .005 10-0762 Replica
.010 10-0763 Replica
Crank Pin
Flywheel
Rod Bearing Sets With Set of 3 Cages fitted with standard Washer 10-1150
size Torrington rollers for connecting rods. The cage material Crank Pin Flywheel Washers sold in pairs.
is noted. Inside OEM Type Fits Size
VT No. OEM Cage Year 10-1150 6506 Bronze L1979-86 Standard
10-0140 24370-52B Alloy 1952-86 10-1149 6506B Bronze L1979-86 .005 Oversize
10-2567 Cage Set Alloy 1952-86 10-1167 6508 Bronze 1987-99 Standard
10-2557 24354-87A Steel 1987-99 10-1151 23972-57 Steel 1957-71 .072
Crank Pin Lock Kits include 2 nuts, 2 locks 10-1273 23972-57A Bronze 1957-71 .073 with fly cut
and mount screws. Nuts and locks are also 10-1164 23972-72 Bronze 1972-E79 .062
available separately. Fits 1954-81. 10-1168 23972-72 Bronze 1972-E79 .005 Oversize
VT No. 10-0183 10-1285 23972-72A Bronze 1972-E79 .060 with fly cut
Alloy Cage Connecting Rod Roller Sets for Crank Pin Nut Sets.
1957-99 XL’s. 100 Quantity Pack Only. Eastern Jims OEM Fits
Size 1957-E86 Size Long OEM 12-0522 12-0604 23967-54A 1954-Early 81
Standard 10-0160 Standard 12-4561 9150A 12-0565 12-0600 23901-81 Late 1981-99
.0002 oversize 10-0161 .0002 12-4562 9152A
.0008 12-4565 9158A
.0004 oversize 10-0162 .001 12-4566 9160A Crank Pin Nut Lock Plate. Fits 1957-81.
.0006 oversize 10-0163 Size Short OEM VT No. 17-0914
.0008 oversize 10-0164 .0002 12-4554 9442A
.0004 12-4555 9443A 839
Pinion and Shaft 10-0404
Hardware
Sprocket and Pinion Shaft Key. Sold in 10
Pinion Shafts. Precision ground for fit.
Jims Eastern VT No. Item Year OEM
pack. Replaces 23985-12. Fits 1954-81.
10-8330 10-0404 — Pinion Shaft 1957-76 24005-57
VT No. 12-0200
— 10-0405 — With Race 1977-E81 24008-75A
Nut, Sprocket and Pinion Shaft Taper End. Sold 10-8354 10-0399 — With Race L1981-85 24005-80
as a 5 pack. — 10-2531 — Race Only 1977-86 24009-77
Eastern OEM Fits — — 12-0321 Bearing Only 1977-86 24648-77
12-0531 8011 1954-80
12-0516 23902-81 1981-85 Pinion Shaft Gears. White is largest, brown
Lock Plate, Sprocket and Pinion Shaft. is the smallest. *Note: Motor Shop Brand.
Sold in 10 pack. 1952-76 1991-99
17-0913 24016-36A 1957-80 XL Standard 12-1394* —
17-0917 24018-72 1972-81 Big Twin Standard 12-1473 —
12-1394 White — 12-1469
Nut, Pinion Shaft Gear End. Red — 12-1468
Eastern OEM Fits Blue — 12-1467
12-0536 7913 1977-90 Green — 12-1470
12-0577 7916A 1991-up
10-2536 Pinion Bearing Sets for 1954-76 XL right XL Cam Gear Bushing
side includes rollers and cages. Washers and Kits include bushings
snap rings included when required except for #1, 2, 3 and 4. Fits
where *noted. 10-0711 1957-90.
VT No. 10-0711
VT No. Item
10-2536 Kit 10-8265
12-0403 Cage
Bearing Only
12-0321* 1977-86
10-2531 1977-84 Race for above
1987-up Pinion Bearings. 10-8266 10-8267
VT No. OEM Item Cam Bushing Kit.

10-8530 8881 Outer Race VT No. Year
12-0946 11177 Retaining Ring 10-8265 1986-90
10-1279 24647-87 Blue Bearing Assembly 10-8266 1977-85
10-1280 24650-87 Red Bearing Assembly 10-8267 1957-77
10-1283 24658-87 Inner Ring 10-8273 1991-96 10-8273
10-1281
10-1281 24659-87 White/Grey Bearing Assembly Bearing Set.
10-1282 24660-87 Green Bearing Assembly 4 piece set for XLS 1957-85.
Case Race machined and ground to factory VT No. Brand U/M
specifications. 10-8285 V-Twin 4
10-8283 Koyo 4
12-0425 V-Twin Each
Cam Bearing Puller removes the inner
cam bearing without splitting the cases
Pinion Right Side Case Race while preventing the rollers from coming
Jims Eastern Size Year out during removal.
10-0252 10-0200 Standard 1954-76 VT No. 16-1392
— 10-0201 .002 1954-76
10-0253 10-0202 .005 1954-76 Cam Thrust Washers for 1958-up.
— 10-0203 .010 1954-76 VT No. 17-0921
— 12-0250 10 pack 1954-76 Set Screw Motor Shop Cam Cover
— 10-0755 Standard 1986 Bushing Service will
— 10-8530 Standard 1987-up install new bushings in
— 10-8531 .002 1987-up cam cover for 1957-up
— 10-8534 .005 1987-up XL models.
VT No. 60-0131
840
Pinion Parts
12-0315
12-0321
VT No. # OEM Description Year VT No. # OEM Description Year

12-1184 1 275 Pin Bushing 1954-90 10-0715 25 25597-57 Bushing Idler 1952-85
12-1173 2 333 Pin, Strainer 1952-76 10-2546 25 As Above .005 Oversize 1952-85
12-1172 3 375 Pin, Casing 1957-76 10-2499 26 25787-57 Stud, Idler Gear 1957-85
12-0705 4 6769 Shims Cams .007 1952-85 15-0217 27 25811-11 Washer, Idler Gear 1957-85
12-0706 6770 As Above .005 1952-85 10-0197 26 and 27 Idler Stud Kit 1957-85
12-0716 6771 As Above .015 1952-85 N/A 29 32591-70 Gasket, 2 Hole 1970-79
12-0717 5 6773 Shim #2 Cam .005 1952-85 15-0156 32591-80 Gasket, 4 Hole 1980-95
12-0718 6775 As Above .010 1952-85 32-0051 30 32601-78 Stud, Ignition 1972-79
XL
12-1258 6778 As Above .015 1952-85 12-1451 31 25776-57 Idler Gear 1957-84
12-0315 6 9057 Bearing Cam 1952-90 13-0106 32 25287-37 Breather Spring 1957-62
10-2552 6 25598-91 Bushing Cam 1991-up 12-1400 33 25517-71 Tach Drive Gear 1971-80
14-0500 7 11100 O-Ring Block 1952-85 12-1290 32A 25265-63 Breather Deflector 1963-78
14-0501 7A 11101 O-Ring Pushrod 1979-85 12-0421 34 26818-37 Oil Pump Drive Gear 1957-76
15-0116 7B 17955-36 Cork, Pushrod (12) 1952-E79 12-1380 34 26318-75 Oil Pump Drive Gear 1977-87
14-0100 8 11124 Seal, Cam Cover 1957-up 12-1377 34 26318-88A Oil Pump Drive Gear 1988-up
10-0502 10 18508-52B Cam Follower Standard 1957-86 17-0519 41 62375-57 Vent Hose Fitting 1970-up
10-0503 — Cam Follower .005 Oversize 1957-86 12-0215 42 11219 Oil Pump Drive Key 1988-99
10-2536 11 Pinion Bearing Kit 1954-76 12-0213 43 11204 Rear Intake Key 1980-85
10-1154 11B 24692-54 Washer 1954-76
12-0913 11C 24701-54 Ret. Ring 1954-76
12-0321 11D 24648-77 Bearing 1977-84
10-2531 11G 24009-77 Race 1977-84 15-0121 Cam Cover Gaskets.
GB No. James OEM Fits
17-0918 11E 7044A Lock 1979-up
— 15-0214 24978-57 1957-81 Oil Strainer
12-0536 11F 7913 Nut 1977-90 15-0564 — Pair 1954-Early 81 Cam Cover
12-0577 11F 7916A Nut 1991-up 15-0121 15-1078 25224-52A 1954-Early 81 Cam Cover
10-0517 12 18554-57 Tappet Adjusters 1957-85 — 15-1382 As Above w/Silicone Bead
10-0522 13 18607-57A Tappet Block (Jims) 1957-85 15-0124 15-0931 25263-81 1982-85 Cam Cover
10-0182 13 18607-57A Tappet Block Set 1957-85 15-0245 15-0932 25263-86 1986-90 Cam Cover
12-1394 14 24011-37 Pinion Gear 1957-76 — 15-1255 As Above With Silicone Bead
12-1473 14 24011-37 Pinion Gear 1957-76 15-0308 15-1256 As Above 1991-99 Cam Cover
N/A 14 24059-74 Pinion Gear 1977-up With Silicone Bead
12-1151 15 24817-52 Stud (3) Casing 1954-81 — 15-0933 25263-90A 2000-up Cam Cover
12-1150 15 24825-82 Stud (3) Casing 1982-up 15-0385 15-1223 25263-00 2000-up Cam Cover w/Bead
40-0121 16A 24912-52A Breather Pipe Chrome 1954-82 Quick Change Cam Gear Gasket and Seal Kit fits XL
12-1512 17 24975-37 Oil Stainer 1954-72 and Evolution motors, includes both cork and quad seals
12-1511 19 25075-55 Breather Valve 1952-76 for pushrods to fit all year range.
15-0121 20 25224-52 Gasket, Cam Cover 1952-81 GB No. Year GB No. Year
15-0124 25263-81 Gasket, Cam Cover 1981-85 15-0752 1957-81 15-0755 1991-99
15-0245 25263-86 Gasket, Cam Cover 1986-90 15-0753 1982-85 15-1265 2000-03
17-0921 21 25551-58 Cam Thrust Plate 1958-90 15-1266 2004-up
10-0709 22 25586-37 Bushing Cam 1952-up Cam Cover Screws for Sportster
Chrome Cadmium Chrome Year
10-2540 22 As Above .005 Oversize 1952-up
Allen Stock Stock
10-0710 23 25588-57 Bushing #2 Cam 1952-90 — 8895-9 8894-9 1954-70
10-2541 23 As Above .005 Oversize 1952-90 8783-8 2062-8 — 1971-84
10-8538 23 25588-91 Bushing #2 Cam 1991-up 9751-11 — — 1986-03
10-0712 24 25593-57 Bushing Pinion 1957-76 9751-11T — — 1986-03
10-2544 As Above .005 Oversize 1957-76 37-1202 — — 2004-up
10-0713 24 25593-74 Bushing Pinion 1977-up 2222-11 — — 2004-up
841
Sprocket Shaft
Sprocket Shafts fit as listed. Machined
and hardened to factory specifications.
Jims Eastern Years OEM
12-0430 12-0322
10-8319 10-0420 1957-76 24000-57
10-8320 10-0421 1977-Early 81 24000-75
10-8321 10-0434 Late1981-85 24000-80
12-0912
12-0322
12-0768
12-0431
Left Crankcase Bearing.
VT No. Timken OEM Fits
12-0430 12-0322 24729-52 1954-76 12-0323 12-0990
12-0989
12-0431 12-0323 24729-74 1977-03
12-0768 24605-07 2004-up
10-0470 14-0118 14-0119
Motor Sprocket Nuts.

VT No. OEM Years Item
12-0502 8025 1957-69 Nut
12-0505 40387-70 1970-88 Nut 12-0714
12-1511
12-0505 12-0149 7652 1989-up Nut
Sprocket Shaft Hardware.
10-0460 40240-89 1989-up Spacer
Sprocket Shaft Hardware 12-0912 A 24701-52 1952-76 Retaining Ring
12-0322 B 24729-52 1952-76 Timken Bearing
Timken Bearing Spacer Shims available in 5
12-0323 B 24729-74 1977-03 Timken Bearing
packs.1977-up Sportster.
12-0422 B 48302-85 1985-03 Cup & Cone Only
12-0989 ACD Kit 1952-76 Spacer Kit
VT No. OEM Size
12-0990 ACD Kit 1977-90 Spacer Kit
10-1261 9143 .102
10-0470 C 24781-54 1954-76 Spacer, each
10-1262 9144 .104
10-0460 C 40240-89 1991-01 Spacer
10-1268 9155 .098
14-0118 D 35151-52A 1954-E76 Seal, 5 pack
12-0983 9119A Retaining Ring,
14-0119 D 35151-74 1977-up Seal, 5 pack
10 pack
12-1511 E 25075-55 1957-76 Oil Transfer Valve
12-0713 F 1952-76 Shim .003
12-0714 F 1977-up Shim .003
Sifton Cams for XLH-XLCH

Sifton 205 Minus Titan Cam Set. They will produce excellent results in well aspirated or very large motors. Timing is taken at .053
of the lift off the low spot on the heel of the cam at the tappets. Tappet clearance is zero to .002.
VT No. Years Degrees @ .053 Valve Lift Spring Info Free
Titan Cam Total Travel
Opens Closes TDC Travel To Coil Bind
10-0666 1981-84 Exhaust 52° 25° .436 .194 .475 .500
842
10-4014
XLH-XLCH Cam
HIGH PERFORMANCE AND DRAGSTER CAMS
Duration Duration Max TDC
VT No. Year Grind Timing Fits
@ .053 @ .020 Lift Lift
10-4014 1971-80 PB+4/1 34/40 258 298 .410 .200 4/1 Kit consists of exhaust cams only for use with Stock P intakes. Bolt-in power for
1981-84 PB+4/1 43/31 254 298 .410 .192 Sportsters with no head work, 2 piece set.
10-4025 1984-85 w/alternator
10-4040 1957-70 PB+ 34/40 254 298 .410 .208 Fits Sportster with P or Q cams, bolt-in more power with great street grind. No head work
10-4045 1971-80 43/31 254 298 .410 .208 needed, more power through RPM range with stock springs. To 7000 RPM.
10-4075 1957-70 Y 35/47 262 310 .425 .206 Street 900/1000 Biggest cam available for no head work installation. Some 1982 engines
10-4080 1971-80 53/29 262 310 .425 .182 may require spring spacing. Stock springs are OK. Great mid and upper end power.
10-4090 1984-85 w/alternator
R5 33/41 254 306 .445 .209 Street Drags modified 900/1000 motors and small strokers. Big boost in torque over stock
10-4110 1971-80 43/31 254 306 .445 .200 cams (2000/7500 RPM). Stock springs are OK, but head set up required.
10-4120 1984-85 w/alternator
X 35/55 270 314 .450 .210 Street Drags for stroker motors to 76”. More mid range and upper end power. Lower lift
10-4145* 1981-84 57/33 270 314 .450 .206 results in easier installation in 1977 and later engines with extended pinion bearing hous-
10-4150 1984-85 w/alternator ing. Stock springs are recommended.
Note: 1981-84 Cam Gear Kit differs from 1971-80 only on the #4 Cam which does not have a tachometer drive gear. Tachometer Gear 25517-71 is available separately as VT No. 12-1400
1986-up 883-1100-1200 XL Engine Cams
— — Stock 02/41 223 270 .458 .094 Listed for comparison
41/02 223 270 .458 .094 Note: 1985-87 exhaust cam lift is .414
10-8120 1986-90 V2 16/44 240 290 .465 .180 Bolt-in cams for Stock 883, 1100 or 1200. More duration and lift means extra power
10-8125 1991-99 N2 46/18 244 290 .440 .155 through RPM range. Stock springs and hydraulic lifters recommended. 2000 to 6000 RPM.
10-8122 2000-up
10-8140 1986-90 V4 30/46 256 296 .490 .216 Street/Drags: Stock or modified 883/1100/1200. Slightly higher idle speed but stock
10-8145 1991-99 N4 52/24 256 296 .490 .189 springs and hydraulic lifters recommended. RPM range: 2500 to 6500.
10-8123 2000-up
10-8165 1991-99 V6 34/50 264 302 .500 .241 Modified 1200’s to 80” and/or high compression pistons. Same intake as N8 but more
56/28 264 302 .500 .212 exhaust duration. Stock springs and hydraulic lifters recommended.
RPM range: 2500-6500.
10-0554 10-0558
10-0559 10-0560
XL
10-0563 10-0348
10-0478
Cam Covers for XL 1971-up

Year Chrome Chrome Chrome Black Polished Polished Polished Cam
Kick and Kick Electric Electric Kick & Kick Electric and
Electric Start Start Start Electric Start Start Primary
Start Only Only Only Start Only Only Screw
Sets
10-0489
1971-76 10-0377 10-0572 10-0559 10-0591 37-8511
1977-80 10-0378 10-0573 10-0558 10-0592 37-8510
1981-85 10-0379 10-0560 37-8510
1986-90 10-0791 10-0857 10-0857 37-8509
1991-03 10-0554 10-0555 37-8508
2004-up 10-0563 10-0348 37-1202
10-1431 10-1432
43-0387
43-0390 Cam/Sprocket Cover Sets for 2004-up XL racing models.

VT No. OEM Item Note: Requires new gaskets
43-0387 25700600 Rocker Box Lower Housing, 2004-up VT No Item Finish Cam Gearcase Cover Only
43-0390 34800032 Sprocket Cover, 2004-up 10-0489 Set Black Gloss 10-1431
43-0391 As Above, Chrome 10-0478 Set Chrome 10-1432
843
Tappet Kits and
Pushrod Set
Stock Solid Alloy
Tappet Kit includes
tappets with adjuster
screws, pushrods and 11-0821 11-0818
tappet blocks. Fits 1957- Sifton Tappet Kits include roller tappets and are fully adjust-
84. able, pushrod set included with hydraulic or solid type tappets.
VT No. 11-0588 VT No. Year Type
10-0821 1957-85 Solid
10-0823 1986-90 Solid
10-0822 1986-90 Hydraulic
10-0818 2000-03 Hydraulic
Sifton Quick Install

Pushrod Sets are
designed to be installed
11-0574
without removal of rocker Tapered Adjustable Pushrods are manufactured from 4130
boxes or cylinder heads. steel with hardened adjusters and ball ends. Designed to be
Precision made from 4130 installed without removing gas tank or camshaft cover. Set of
chromoly tubing. Fit 1991- four for solid or hydraulic tappets.
03. VT No. Year
VT No. 11-9544 11-0574* 1991-03
*Note: Requires the use of VT No. 11-0935 pushrod covers.
Sifton Pushrod Sets are
constructed of aluminum
alloy with heat treated
steel ends. Fits 1957-85.
Sifton Colony
11-9703
11-9529 7123-4
Andrews Pushrods available in chromoly steel or aluminum,
adjustable of fixed type as noted. All are stock diameter, so
there is no cover interference.
VT No. Fits Style
11-9529 11-9867 1986-90 Adjustable Aluminum
11-9868 1986-90 Adjustable Chromoly
Solid Pushrod Kits include four alloy push- 11-9869 1991-03 Fixed Aluminum
rods and adapters to convert stock hydraulic 11-9870 1991-03 Fixed Chromoly
tappets to solid. Fits 1986-03 883-1200 11-9952 1991-03 Adjustable Aluminum
Sportster. 11-9874 1957-85 Fixed Chromoly
VT No. Years 11-9876 1957-85 Fixed Aluminum
11-9547 1986-90
11-9538 1991-03 S&S Hydraulic .612 Tappet Limited Travel
Kit. Designed to maximize the efficiency of
the stock hydraulic tappets. Kit consists of 4
machined heat treated and ground spacers
when installed in the tappets reduce the travel
of the hydraulic unit in high rpm situations thereby eliminating
potential damage to the engine due to high RPM valve float.
Fits 2003-up.
VT No. 10-8532
Sifton Taper-Rod Pushrod Set is constructed of chromoly

extruded tapered tubing fits 1991-up XL’s. Order Andrews Cam
Set separately.
VT No. Item Year
11-9544 Pushrod Set 1991-03
10-8165* Cam Set 1991-99
10-8128* Cam Set 2000-up
*Note: Modified 1200’s to 80” and/or high compression pis-
tons. Stock springs and hydraulic tappets recommended. RPM
range: 2500-6500.
844
11-0905 Pushrod Cover Set
Billet Pushrod Cover and
Mount Base Set allows adjust-
able covers to be used on 1991-
2003.
VT No. Item
14-4171 Lifter Base Seal Kit
11-0944
11-0933
37-9078 11-1073
37-9079
37-9078 11-0029
11-0935 37-9078
Pushrod Cover Cups feature die-cast construction in chrome
or gold, set of four.
VT No. Item
37-9078 Chrome Skull
37-9079 Gold Skull
11-1073 Brass Hex
11-0024 with Chrome Skull
11-0029 with Black Skull
XL
11-1205 11-0941
Quad Cork O-Ring
14-0971 14-0671
14-0951
Chrome Pushrod Cover Kits include all pieces and seals.
VT No. Years Pushrod Cover Cork-Seal Kits include enough pieces to seal
11-0905 1957-Early79 4 complete pushrod covers on years listed. Available in cork,
11-0937 Late1979-85 OEM-type Quad, or Buna-N machined rubber seals.
11-0933 1985-89 James GB No. Type Fits
11-0935 1990-2003 14-0668 15-0626 Cork 1957-79
11-1205 2004-up 14-0670 14-0953 Quad 1979-84
11-0930 Adapts 11-0933 to 1990-up — 14-0971 Rubber 1957-79, Blue Silicone
11-0941 1990-2003 one piece design 14-0671 14-0951 Rubber 1986-89
14-0672 14-0952 Rubber 1991-up XL 883 1200 Evolution
— 8729-12 Rubber 1957-79 (Colony)
Pushrod Cover Components fit 1957-85.
Colony V-Twin Item Fits
7507-20 11-0929 Upper Kit 1957-85 Pushrod Tube Seals.
9887-20 — Upper Kit 1986-90 VT No. OEM Type Years
— 11-0916 Clip Only (4 piece) 1957-85 14-0501 11101 Lower 1979-85
— 11-0932 Clip Only (4 piece) 1986-89 14-0512 11132 Middle 1979-90
7808-4 — Inner Tube 1957-78 14-0550 11145 Lower 1986-90
— 11-0908 Inner Tube 1979-85 14-0532 11157 Upper 1984-90
7822-12 11-0923 Lower 1957-78 14-0912 11190 Upper 1991-up
— 11-0936 Lower 1979-85 14-0935 17944-89 Lower 1991-03
845
Rocker Sifton Rocker Arm Seals
are machined of nylon to
replace rubber O-rings on
Rocker Shaft
End Cap Kit
for Sportster
Arm 1957-85 models.
VT No. 14-0148
8224-8
as replica type
with hex caps
for left side.
VT No. Year Finish Nut Type
2019-8* 1957-84 Chrome Slot
11-9511 11-9512 2020-8* 1957-84 Cadmium Slot
Rocker Arms include bushings installed. 8222-8 1957-70 Chrome Slot
VT No. OEM Type Brand 14-0501 8223-8 1957-70 Cadmium Slot
1986-up Evolution 8224-8 1971-84 Chrome Allen
11-9511 17360-83 Rear, Front Sifton Rocker Arm Spacer and Shims. 8225-8 1971-84 Cadmium Allen
11-9512 17375-83 Front, Rear Sifton VT No. OEM Item Qty *Note: Feature 1/2 x 20 thread to be used
1957-85 12-2116 17451-57 Spacer 10 pack on later type rocker shafts.
11-0522 17394-57A F. Ex VT 13-0100 17483-57 Springs 10 pack Chrome Allen
11-0523 17395-57A R. Ex VT 14-0501 11101 O-Ring 10 pack Rocker Shaft
11-0524 17396-57A F. In VT Rocker Arm Shims fit 1957- Plugs. Set of 4. Fit
11-0525 17397-57A R. In VT 85. 1971-84 XL models.
11-1066 Set with shafts VT VT No. Size Includes sockets
12-0704 .005 and cups.
12-0710 .007 VT No. 37-0025
12-0715 .015
Rocker Box Bolts for both
heads, includes washers.
Rocker Arm Shaft. Available in stock hex type,
VT No. OEM U/M Brand acorn or allen.
Fits 1957-85 Colony VT No. Year Finish Type
11-0518 17435-57A Each Sifton 9829-28 — 1957-76 Chrome Hex
Rocker Arm Bushings replace 17428-57.
11-1068 17435-57A Set Sifton 9830-28 — 1957-76 Cadmium Hex
Use on 1957-up models. Eight pieces.
Fits 1986-up 7136-14 — 1957-76 Chrome Acorn
VT No. Type
11-0571 17611-83 Set of 4 Sifton 8789-28 — 1957-76 Chrome Allen
10-0700 Stock Split type
11-0576 17611-83 Set of 4 Jims 9831-28 — 1977-85 Chrome Hex
10-2106 As Above, Sifton
11-0814 17611-83 Each — 9831-28T 1977-85 Chrome Hex
.005 Oversize Sifton 9832-28 — 1977-85 Cadmium Hex
8400-8
Rocker Arm and Shaft Kit by Sifton fits

Sifton Rocker Arm and Shaft Kit fits
1986-up models. Includes (2) 17375-83
1957-84 XL Iron Head models and
rocker arm, (2) 17360-83 rocker arm and
includes four rocker arms with bushings
(4) 17611-83 shafts. VT No. 11-0572
installed, four shafts, shims, spacers,
11-0677 chrome replica end caps and nuts.
VT No. 11-0820 8730-8
Rocker Shaft End Nut Kit includes four
acorn or cap style nuts and washers.
VT No. Type Fits Finish
7142-4 8400-8 Cap 1957-85 Chrome
Chrome Rocker Shaft End Plugs. 8401-8 Cap 1957-85 Cadmium
Installation or removal is much easier 8730-8 Acorn 1957-85 Chrome
than original slotted part. Packaged four 12-1193 Washers 1957-85 Zinc
per set.
11-0078 VT No. Fits
Rocker Box available with polished or
7142-4 1971-84
chrome finish for Iron Head Sportster. Fits
7143-4 1957-70 Chrome Rocker Shaft End Caps provide
1957-85 XL.
VT No. Finish Note ease of installation with ample clearance
11-0677 Chrome Set Bare between gas tank. Fits 1971-85.
11-0855 Polish Set Bare VT No. 8614-4
11-0078 Chrome Set Assembled
11-0867 Polished Set Assembled
846
Lightning Tappet Assemblies.
Complete units precision machined and
drilled for early motors. Holes allow
Tappet
better lubrication in valve train. Screws
included. Fits 1957-85.
Solid Tappet Assembly
for 1957-85
Big Axle Standard
VT No. Size
10-0515 .005 Solid Tappet Assemblies include roller
assembly installed. Jims does not include
10-0527 .010
adjuster screws or nuts where neces-
sary. Jims available with Big Axle Roller
Assembly. Fit 1957-85.
Big Axle
Jims Eastern Size 10-0852
10-0632 10-0502 Standard Sifton Solid Tappet Assembly fea-
10-0542 37-8866 10-0633 10-0503 .005 ture centrical surface fine grinding and
Tappet Adjusting Screws and Nuts. — 10-0524 .010 max-axle precision fit rollers and pins.
VT No. Qty Year Item — 10-0451 .015 Solid units include adjuster screws & lock
10-0542 Kit 1957-85 — 10-0452 .020 nuts. Fit 1957-85. Sold in a set of four.
10-0517 4 pack 1957-85 Screw VT No. Size
12-0523 10 pack 1936-52 Split Nuts 10-0784* Standard *Note: Does not
8780-4 4 pack 1936-52 Split Nuts include adjuster screw and nuts.
10-0852 Standard
10-0520 10-0774 .005
12-0524
Tappet Roller Repair Kit includes 4 pins 10-0775 .010
and 4 roller assemblies for 1957-85 XL. Solid Lifter Kit
Replacement Nuts fit each brand of VT No. Brand includes four standard
pushrods or tappets. 10-0520 V-Twin tappets with adjusters
8780-4 Colony ⁵⁄₁₆ - 24 4 pack 12-1179 Pins Only, 10 pack and four lifter blocks.
37-8866 V-Twin ⁵⁄₁₆ - 32 4 pack VT No. 10-0474
12-0524 Eastern ⁹⁄₃₂ - 32 10 pack
1986-up
10-8277
XL
Evolution Hy-RevTM Hydraulic by
10-8277 V-Thunder features a unique anti-pump
10-0824
up race retainer, designed to replace the
V-Twin Replacement Tappets for 1991-up 11-9544
normal clip so as to precisely limit trav-
models. el of the plunger during operation, this
VT No. Size U/M allows the valve train to perform more
Fits 1991-99 like a mechanical stern allowing higher
10-8277 Standard Each RPM operation with quiet and precision
Fits 2000-up of hydraulics. Fits 1991-99. Standard
10-0820 Standard Each Evolution Solid Tappets can only be size. Set of 4.
10-0824 Standard Set of 4 used with adjustable pushrods. Jims VT No. 10-8281
brand sold each. SiftonTM sold in set of 4.
Jims Big Axle Tappet 10-1806 Jims SiftonTM Size Years/Fits
Assemblies include roller
10-0636 10-8256 Standard 1986-90 Crane Hydraulic Roller Tappet
assembly installed. Sold each.
10-0637 10-8257 .005 As Above provides improved RPM capa-
— 10-8258 .010 As Above bility, superior reliability and qui-
VT No. Size Fits/Type — 10-8376 Standard 1991-99 eter operation. Features include
1986-90 Pushrod Sets for Above. use of a precision, hardened
10-0657 Standard Hydro Solid 11-9544 1991-03 ball-type valve to provide supe-
10-0658 .002 Hydro Solid rior sealing and lash control.
1991-99 A rotating check ball prevents
10-8276 Standard Power Glide localized wear and pitting. Fits
10-1803 Standard Hydro Solid 10-2534 1999-up. VT No. 10-2200
10-8282 .005 Power Glide
2000-up
10-1806 Standard Power Glide Tappet Roller Repair Kit includes 4 pins
10-0568 Standard Power Glide II and 4 roller assemblies.
10-0571 .005 Power Glide II VT No. Year/Model Brand
10-1811 .010 Power Glide II 10-2534 1986-99 Evolution XL V-Twin
10-0569 Standard Hydro Solid 10-0529 1986-99 Evolution XL Crane
847
Replica Valve
11-0609 11-0617 11-1111

Model and Year Type OEM SiftonTM SiftonTM SiftonTM V-TwinTM V-TwinTM
Nitrate Steel Nitrate Chrome Stainless
Steel Steel Steel Steel
Nitrate
Ironhead Sportster Intake 18070-58
1958-69 Exhaust 18080-58A 11-1107 11-0617 11-0631
Ironhead Intake 18070-70 11-1106 11-0609 11-0628
Sportster Exhaust 18080-58A 11-1107 11-0617 11-0631
1970-85 Exhaust ¹⁄₈” O.S. 11-9646
Ironhead “R” Intake 1¹⁵⁄₁₆ 18070-70R 11-0665
1970-85 Exhaust 1³⁄₄” 18080-70R 11-0676 11-0618 11-0623
Note: All XL Valves with an “R” after OEM part number denote racing stem lengths, they are
.080” longer than the stock valves. All “R” type valves have a tulip shape head for maximum
flow. Valve face diameters are also larger which require a larger seat ground in the head.
Evolution 883cc Intake 18031-86 11-1109 11-0671
1986-2003 Exhaust 18030-86
Evolution 1100-1200 Intake 18023-87 11-1111 11-0667
1987-2003 Exhaust 18024-87
Tappet Base
10-0540
42-0447
Tappet Block for 1957-84 in polished finish.

VT No. OEM Brand
10-0522 18607-57 Jims, each Chrome Tappet Base Cover is die cast one piece covering
10-0182 18607-57 V-Twin, 4 Piece Set the area from the pushrod tube base to the cam cover. Fits
10-0540 18607-57 Sifton Set 1991-2003.
8782-4 Screws Chrome Set, Allen VT No. 42-0447
9846-4 Screws Cadmium Hex Bolt Set Chrome Tappet Cover fit
XL models, 2004-up.
VT No. Item
10-0565 Cover
15-0544 Gaskets
Tappet Base Screws. Chrome Tappet Covers fit 1986-
Year 1957-85 1986-90 1991-94 1995-03 90 XL, 4 piece 42-0113 style
Acorn –– 8867-4 9765-4 9766-4 presses onto tappet block.
Allen 8782-4 8782-4 9759-4 9760-4 VT No. 42-0113
Hex, Cadmium 9846-4 –– –– ––
Tappet Block Set fits
1986-90 XL models. Set
of 4.
Chrome Tappet Block Cover Set features VT No. 10-0593
contour for perfect fit over existing stock style
tappet blocks, securely held in place by four
chrome allen screws which are supplied.
Pushrods must be removed for installation.
Original design by Motoy-CycleTM Accessories. Fits 1957-85
XLH-XLCH.
VT No. 42-0115
Developed in 1991
848
Valve by Rowe or Precision Machining (Kibblewhite). Intake valves are made
of 8645 heat treated valve steel and the exhaust valves are made of
and
21-2N heat treated non-magnetic stainless steel. These valves are
available with the following stems and heads:
Model and Year Application ROWE VALVES KIBBLEWHITE

Forged & Shot Peened Fully Stainless
Head Machined
Head
Roller Melonite Melonite Rowe Pro Black Razor
Burnish Special Special (4) Diamond™ Back
Stem (1) Black Black (5)
Stem (2) Stem (2)
Ironhead Intake 18070-58 — — — — 11-6003 —
Sportster
1958-1969 Exhaust 18080-58A — — — — 11-6010 —
Intake 18070-58 11-6034 11-6041 — — 11-6004 —
Ironhead 1/16” O.S. — — — — 11-6107 —
Sportster
1970-1984 Exhaust 18080-58A — — — 11-6010 —
1/16” O.S. — — — — 11-6108 —
Ironhead Intake — — — — — 11-6082
Sportster XLR
1970-85 Exhaust — — — — 11-6013 —
Evolution 883cc Intake 18031-86 — — — 11-6109 11-6091 —
Oversize Valve Seats can be used with 1986-2003 Exhaust 18030-86 — — — — 11-6092 —
unleaded gas. Replacement size is actual Evolution 1100cc Intake 18023-86 — — — — 11-6005 —
size of seat supplied by V-Twin Number. 1987-2003 Exhaust 18024-86 — — — — 11-6012 —
Stock size is noted as reference only. Evolution 1100cc Intake 18023-87 — — 11-6065 — 11-6093 —
1200cc 1987-2003 Exhaust 18024-87 — — — — 11-6094 —
Intake
Evolution Intake 18053-04 — — — — — —
VT No. Fits Stock Size 883cc 2004-up Exhaust 18059-04 — — 11-6116 — — —
11-0642 1957-69 1.690 Port Size Evolution Intake — — 11-6117 — — —
Replacement Size 2 x 1.687 x ⁹⁄₃₂” 1200cc 2004-up Exhaust — — — — — —
11-0643 1970-85 1.650 Port Size Conversion 883 to Intake — — — — 11-6072 —
Replacement Size 2¹⁄₁₆” x 1.687 x ⁹⁄₃₂” 1200 Evolution Exhaust — — — — 11-6073 —
11-0787 1986-up 1.815 x 1.398 x .384 (1) Roller Burnished Stem: Roller burnishing smooths the finest grind finish (16
Replacement Size 36.5mm x 47mm x microinch) to a 4 microinch.
10mm (2) Melonite, Special Black Stem: This is a heat treating process developed and
patented in Germany. Gives the valve a Black Smokey look. Very hard and
Exhaust slippery. Currently being used on O.E.M. valves available in Rowe or Black
XL
11-0659 1957-85 1.405 Port Size Diamond brands.
(4) Razor Back by Kibblewhite are one piece forged Evolution-8 stainless steel,
fully CNC machined with hard chrome stems.
(5) Rowe Pro: Forged one piece stainless steel valve precision CNC machined.
Features special black Melonite finish, swirl polished tulip area and heat treated
water tip.
One Piece Valve

Manley Stainless Valve machined from one piece forging with a 48-1473
48-1351 48-1512
swirl polished finish and chrome plated stem. Sold pairs.
VT No. Type Head Diameter Stem Diameter OEM
1970-1985
11-9000 Exhaust 1⁹⁄₁₆” stock .3385 stock 18080-58A
11-9032 is stock length from factory.
11-9032 Intake 1¹⁵⁄₁₆” stock .309 stock 18080-70 48-1545
48-7787
1958-1969 Belt Buckles.
11-9000 Exhaust 1⁹⁄₁₆” stock .3385 stock 18080-58A VT No. Style
11-9034 Intake 1¹³⁄₁₆” stock .309 stock 18070-58
48-1351 XLH Ironhead
883 Evolution 1986-2003
48-1512 XL Gas Tank
11-9083 Exhaust 1.345 stock .3095 stock 18030-86
11-9080 Intake 1.585 stock .3105 stock 18031-86
48-1473 XLH Ironhead Electric Start
1200 Evolution 1988-2003 48-1545 XL Points Cover
11-6093 Intake 1.715 stock .3105 stock 18023-87 48-7787 XLCH Sportster
48-1522 Complete Set
849
Valve Guide
11-2158 11-2157
11-0718
11-0722
Size V-Twin Rowe Rowe Unhoned Cast Iron Valve Guides

Cast Iron Ampco 45 Intake and Exhaust Guide is the same unless noted.
Intake Exhaust Intake Size 1957-82 1957-82
1957-82 Intake Exhaust
Standard 11-0718 11-0722 Standard
+.001 11-0719 11-0723 .001 11-2157
+.002 11-0720 11-0724 .002 11-2158
+.003 11-0721 11-0725 .003 11-2160
+.004 11-0687 Top Dia. .531 .531
1983-85 Seal# 14-0143 14-0144
Standard 11-1913 Overall 1.73 1.86
Length*For High Lift Cams
11-0771 11-1019 11-1014

11-1030
Size Kibblewhite Kibblewhite Kibblewhite Size Kibblewhite Kibblewhite

Rowe
Bronzonium Ampco 45 Cast Iron Machine Machine
Ampco 45
Ampco 45 Cast Iron
Intake Exhaust Intake Exhaust Intake Exhaust In/Ex
In/Ex In/Ex
1957-82 Evolution Sportster 1986-up
STD 11-1024 11-1029 11-1034 11-1039 STD 11-1019 11-1014
+.001 11-1025 11-1030 11-1035 11-1040 +.001 11-1020 11-1015
+.002 11-1026 11-1031 11-1036 11-1041 +.002 11-1016
+.003 11-0767 11-1027 +.003 11-1022 11-1017
+.004 11-0685 11-0684 +.004 11-1898 11-1023 11-1018
Valve Seal
Valve Stem Oil Seal Kits include four piec- 14-0143 14-0143
es of proper guide seal and installation tool
for XL’s. Tool sold separately.
VT No. Fits
16-1745 1985-up Kit
Valve Stem Seals in 10 packs for years listed. Installation tools
16-0405 1957-84 Kit
and plastic 10 pack sleeves available separately.
16-0134 1957-84 Tool, White
VT No. Fits Mfg. No. Size
16-1746 1984-up Tool, Red
14-0143 Intake XL 1957-85 1404 ⁵⁄₁₆”
Installation Tools 14-0144 Exhaust, XL 1957-85 1405 ¹¹⁄₃₂”
116-0134 16-1746
16-0134 1957-84 XL Tool 14-0164 Evolution 883-1200 1400 ⁵⁄₁₆”
16-1746 1984-up XL Tool Only 16-1751 Sleeve ⁵⁄₁₆”
16-1752 Sleeve ¹¹⁄₃₂”
850
Valve Spring Kits
Sifton Lower Valve Collar and Seal
Kit for all 1957-85 XL models. Kit
includes four special lower collars
machined to accept K-line style seals.
Two intake seals and two exhaust Kibblewhite
seals. Top of guide must still be Lightweight
machined to accept seals. Seal instal- Valve Spring
lation tool included. Kits include
VT No. 11-0821 springs, keepers,
Kibblewhite Lightweight Valve retainer, and
13-2210 Spring Kits include springs, keepers, lower collars
retainer, and lower collars unless unless noted.
noted. Fits 1970-84 XL for 160 lb seat
pressure, up to .460” valve travel.
Hard-anodized aluminum retain-
ers. May require “R” model valve to All Evolution XL
achieve installed height. VT No. Type
VT No. 13-2210 13-2085 170-180 lb seat pressure, up to .600” valve travel.
With Heat treated steel retainers.
11-9608 13-2140 170-210 lb seat pressure, up to .800” valve travel
Valve Spring Set for Sportster .490” With Titanium retainers.
Lift Kit except Evolution. The above 13-2142 170-210 lb seat pressure, up to .800” valve travel.
.490 lift kit features stock OD springs, With Heat treated steel retainers.
interference fit to reduce harmonics
and control spring surge. No machining
required for installation. Springs have Kibblewhite Valve Spring Set for High Lift
20% more pressure than stock. Use Cams can be used with stock retainers and
with stock lift cams to .490. Supplied
lower collars.
with steel top collars. Uses stock lower
collars. VT No. Fits
Combined Coil Recommended 13-2215 1970-84 stock replacement
11-9609 85 @ 1.310 .790 Stock-.490 Kibblewhite Valve Spring Keeper Sets.
.500 @ .820 Keepers are CNC machined and then
XL
heat treated.
VT No. Fits
13-9211 Valve Spring Kits. Includes all 11-2096 1986-up
11-2096
springs, collars and keepers nec-
essary for each application. Kibblewhite Valve Keeper Keys Split
VT No. Year Spring Only type Packaged and sold in four pairs per
13-9211 1957-81 13-0102 package enough for one engine.
13-9199 1981-83 13-0102
13-9207 1983-85 13-9175 1957-85 1986-2001
13-9196 1986-01 11-0514 V-Twin 11-9610 Manley
13-9251 11-9614 Manley 11-0805 V-Twin
11-0811 11-0806
Andrews Valve Gear

VT No Item
1986-2001 XL Evolution Steel Valve Collars. Precision Machined and heat treated.
13-9251 Hi-Lift Springs .550+ :No machining required Black oxide finish.
VT No. OEM Use Year Model
11-0806 18220-57 Lower 1957-Early81 900 and 1000
11-0807 18220-81 Lower 1981-Early83 900 and 1000
11-0808 18220-83 Lower Late1983-85 900 and 1000
11-0809 18221-57B Upper 1957-84 900 and 1000
11-0810 18222-83 Lower 1986-01 883-1100-1200
11-0811 18219-83 Upper 1986-01 883-1100-1200
851
Heads and Hardware 42-1158 42-1157
Components
for One Head
Finned Head Bolt Bridge.

37-9370 Bolts on! 2004-up XL.
Chrome Black Silver
42-1158 42-1157 42-1156
42-1156
37-8141 Chrome Dome Cap Kit
Head Bolts and Hardware Kits for 1986-up XL Models for one
head.
VT No. # OEM Item 9110-9 Installed 37-9131 Installed
37-9370 — Hardware Kit (Includes D, E and G)
2011-8 E 16478-85A Head Bolt Chrome, 8 pack
F 16480-85A Screw Set, Late 1985-91 Big Twin
2012-8 E 16478‑85A Head Bolt Chrome, 8 pack
F 16480‑92 Screw Set 1993-up XL
9507-8 G 16832‑86A Colony Stud Evolution, 1986-up XL 37-8799 37-9131
37-9260 G As Above Sifton
37-8935 H 16573‑83 Insert, 8 pack
12-1187 I 16715‑83 Exhaust Stud, 5 pack
14-0516 J 26432‑76 O Ring, 10 pack
37-9075 D 16482‑85 Washer Late1985‑92, Zinc, 4 pack 2024-4 2262-4 42-1092
2017-8 D As Above Chrome, 8 pieces Headbolt Covers fit over 12 point headbolts on 1973-85
XL Sportster, 1986-up Evolution 883-1100-1200 Sportster.
Chrome 12 Point Head Bolt Set Evolution styles include four pieces for left side only 1973-85
includes 8 washers and 8 head Sportster kits include eight covers.
bolts for 1986-92 XL. VT No. Finish Style Year
VT No. 37-9019 9110-9 Chrome Acorn 1973-85
9111-9 Gold Acorn 1973-85
9112-9 Chrome Cap 1973-85
Head Bolt 37-8799 Chrome Cylinder 1986-up

37-9399 Black Cylinder 1986-up
37-9131 Chrome Grooved Cylinder 1986-up
2024-4 Chrome Hex Dome 1986-up
2262-4 Chrome Spike 1986-up
42-1092 Brass Spike 1986-up
1986-03 Head Bolt and
Spark Plug Covers are
die cast and chrome
plated to cover entire
8944-16
head bolt area and
Head Bolts, Head Nut and Washer Kits are the highest quality
spark plug base. Held
available. Machined from high strength steel and hardened to
original factory specifications to prevent stretching. All bolts fea- in place by rubber boots
ture rolled threads for superior strength and fit. on spark plug wires. Fits 883-1200 XL models.
Cad Chrome Fits Type VT No. 42-0741
8945-16 8944-16 1957-72 Hex
— 9747-16 As Above Allen
9212-16 9211-16 1973-85 12 point
— 9748-16 As Above Allen
Head Bolt Washer Kit fits 1957-85 Sportster models.
48-1351 48-1512 48-1545
8170-10 8488-10 48-1473
883 XL Model. Ironhead motor Belt Buckles.

model features 1:10 scale with VT No. Style
authentic 1957 Sportster 900cc 48-1351 XLH Ironhead
details! Fully pewter casted and 48-1512 XL Gas Tank
mounted on a wooden base for 48-7787 48-1473 XLH Ironhead Electric Start
display. VT No. 48-0746 48-1545 XL Points Cover
48-7787 XLCH Sportster
852 48-1522 Complete Set
9.5:1 883-1200 Big Bore Cylinder Kit
Big Bore kits on this Page Do Not Require Any Machining!
No Head Work Necessary

Each kit includes
• 2 Pre-Fit Cylinders with pistons and matching Hastings
Piston Rings
• 9.5:1 Compression
11-0595
11-0473
1200cc XL Conversion Cylinder and Piston Set includes 2

silver finished cylinders or black wrinkle with milled edge fin cylin-
ders with fitted Wiseco or Sifton moly 9:5:1 reverse dome piston
and ring set. Order Rocker box gasket set separately.
VT No. Item Type Finish Years
11-0473 Cylinder/Piston Kit Wiseco Silver 1986-03
11-0355 Cylinder Piston Kit Wiseco Black 1986-03
11-0595 Cylinder/Piston Kit Sifton Moly Black 1986-03
11-1115 Cylinder/Piston Kit Sifton Moly Silver 1986-03
11-1118 Cylinder/PistonKit Sifton Black 1986-03
11-1104 Cylinder/Piston Kit Sifton Silver 1986-03 We recommend use of adjustable pushrods with installation of Big Bore Kits
11-1105 Cylinder/Piston Kit Sifton Black 1986-03
11-0346 Cylinder/Piston Kit Wiseco Silver 2004-up
11-0347 Cylinder/Piston Kit Wiseco Black 2004-up
11-0377 Cylinder/Piston Kit Sifton Moly Silver 2004-up
10:1 883-1200 Big
11-0378 Cylinder/Piston Kit Sifton Moly Black 2004-up
Each kit includes
• 2 Pre-Fit Cylinders with pistons and matching Hastings Piston
Bore Conversion
Cylinder Kit
XL
Rings
• 10:1 Compression
No Head Work Necessary

Big Bore kits on this Page Do Not Require Any Machining!
The Sifton cylinders have a very thick, large O.D., “cast in” liner
which has been proven to be an important factor to maintain
thermal stability which is the ability to retain the important cylin-
der bore dimension through repeated heat cycles.
15-0389 Cylinder Base/Head Gasket Set.
VT No. Fits
15-0389 1986-03 XL
15-0394 2004-up XL
1200cc XL Conversion Cylinder and Piston Set includes 2

silver finished cylinders or black wrinkle with milled edge fin cylin-
ders with fitted Wiseco 10:1 piston and ring set.
VT No. Finish Fits
11-0565 Silver 1986-2003
11-0589 Black 1986-2003
11-0336 Silver 2004-up
Kwik-way Boring Bar
11-0337 Black 2004-up
Power Stroke Hone

Precision Fit!
853
1957-85 Cast Iron
Cylinder & Piston Kit
Cylinders and Hardware

Cylinders are for stock bore, stock stroke and compression.
Must be honed to standard size for proper fit.
Front Rear OEM Year CC
11-0482 11-0492 16464-58 1957-71 900
11-2607 11-0488 11-0489 16464-72 1972-Early 73 1000
11-0504 11-0505 16464-73A Late 1973-85 1000
VT No. VT No. Base Nut Wrench for 1957-85.
9:1 10:1 Wiseco Year CC VT No. 16-0108
11-2605 — 1957-71 900
11-2606 — 1972-Early 73 1000
11-2607 11-2617 Late 1973-85 1000
Cylinder Base Studs feature heat B C
treating and interference thread
at cylinder base. Sold as a set of A
eight.
Cylinder Base Nuts for 1957-84.
VT No. OEM Year
Chrome Cad Parkerized # Type/Fits
8858-8 16830-72 1972-85
7018-16 — — B 1957-84, Acorn
12-2102 16830-54 1954-71
7623-8 — — C 1957-84 XLR type,
12-2103 16830-72 1972-85
8106-16 8107-16 9624-16 A Stock Hex
Gasket Kit Collapsible Pushrod

11-0944
Cover Kit
11-1205
14-0931
Collapsible Pushrod Cover Sets allow for ease of pushrod

change or adjustment.
15-0317 VT No. Year
11-0944 1991-2003
11-1205 2004-up
Rocker Cover Gasket Kits for Evo include upper and lower 15-1377
gaskets in cork or molded O-ring type with bolt seals and wash-
ers for both heads.
James GB OEM Type Fits
15-0862 15-1377 17030-89 O-Ring 1986-90 883-1100-1200
— 15-0317 17030-86R Cork 1986-90 883-1100-1200
15-0863 14-0931 17030-91 O-Ring 1991-2003 883-1200
854
Replica Cylinder for 1986-up XL’s
Each kit includes two pre-fitted cylinders with pistons and
matching Hastings piston rings, two head gaskets, two base
gaskets and wrist pins.
11-1203
11-0342
11-0344 11-0343
Cylinders for Evolution XL Models sold each. Cylinders sold
without pistons and are not honed for final fit.
VT No. OEM Model Finish Years
11-0341 16446-86A 883 Silver 1986-03
11-0343 16447-88 1200 Black Wrinkle 1988-03
11-0344 16447-88 1200 Silver 1988-03
11-0342 16447-88 1200 Silver 1988-03
11-0334 16463-04 1200 Silver 2004-up
11-0335 16463-04 1200 Black Wrinkle 2004-up
11-2609 Motor Shop 1200cc Cylinder Sets include Wiseco fitted pis-
ton and ring sets to be used with 1200cc heads only. Fits 1988-
03 1200cc as stock replacement on 1200cc only. Can not be
used as Big Bore Kit for 883 models.
VT No. Finish Ratio
11-1200 Black 9:1
11-1201 Silver 9:1
11-1202 Black 10.5:1
11-1203 Silver 10.5:1
Install Slobber Stopper in this hole. Remove material
Tap threads in this hole using tap here to achieve
supplied in kit correct alignment
Replica Evolution XL Cylinder and Piston Sets are pre-fitted
XL
with cast pistons and Hastings Rings. Umbrella valve
VT No. Size Finish Fits replace during
reassembly
11-2608 883cc Silver 1986-03 Drain Hole Enlarge
11-2609 1200cc Silver 1988-03 with drill bit supplied
in kit
Rocker
11-2626 1200cc Black 1988-03 Cover
Spacer
Underside of outer rocker box cover
Sifton Evolution Rocker Box Breather Upgrade

Kit includes tap, drill bit, breather tubes and
48-1512 48-1473 48-1545 48-7787
48-1351 instructions. Fits 1992-up.
VT No. 16-0916
Belt Buckles.
48-1351 XLH Ironhead
48-1512 XL Gas Tank
48-1473 XLH Ironhead Electric Start 11-1685
48-1545 XL Points Cover OE Breather Valves, sold each.
48-7787 XLCH Sportster Front Rear Year
48-1522 Complete Set 11-1684 11-1685 2007-up
Engine Stand for a 1952- 14-0955 Valve Flap
2003 XL engine.
VT No. 16-0507
XLCH Motor Plaque features 1971
style Ironhead Sportster.
VT No. 48-0372
855
Forged Piston Kits
1972-85 1000 Sportster 10:1 Compression 3³⁄₁₆” Bore. Piston Kits include Hastings X Ring.
Standard .010 .020 .030 .040
Piston Kit 11-9720 11-9721 11-9722 11-9723 11-9724
Rings 11-9748 11-9749 11-9750 11-9751 11-9752
1986-up 883 XL Evolution Overbore to 1200cc Rev Dome 8.5:1 Compression 3¹⁄₂” Bore.
Piston Kits include Hastings X Ring.*Note: 2009-up cylnders cannot be overbored. Requires the
purchase of 1200cc cylinder to be used with piston kit.
Standard .010 .020
Piston Kit 11-9945
Note: For our Product Descriptions “XL” Rings 11-9759 11-9762 11-9760
denotes for Sportster models (including XLH,
XLCH, XLS). 1986-up Piston Kits include Hastings X Ring Pack. 883 XL Evolution Overbore to 1200cc. 9.5:1
Rev Dome Compression 3¹⁄₂” Bore. *Note: 2009-up cylnders cannot be overbored. Requires the
Wiseco High Performance Forged purchase of 1200cc cylinder to be used with piston kit.
Piston Sets include 2 pistons that are Standard .010 .020 .030 .040
forged from a high Silicone alloy, 2 ring Piston Kit 11-9885 11-9886 11-9887 11-9888 11-9889
sets (either Wiseco XC or Hastings X Rings 11-9759 11-9762 11-9760 11-9764 11-9765
style), 2 wrist pins and 4 circlips. Wiseco 1986-up 883 XL Overbore to 1200cc Rev Dome 10:1 Compression 3¹⁄₂” Bore
rings sold per piston. Piston Kit includes Hastings X-Ring Pack.*Note: 2009-up cylnders cannot be overbored.
Requires the purchase of 1200cc cylinder to be used with piston kit.
11-9885 Standard .010 .020
Piston Kit 11-9846 11-9847 11-9848
Rings 11-9759 11-9762 11-9760
1988-2003 1200 XL, 1986-1987 1100 XL Piston Kits include Hastings X Ring Pack. 1200cc XL
Evo 9:1 Compression with flat top piston.
Standard .010 .020 .030 .040
Piston Kit 11-9890 11-9891 11-9892
Rings 11-9759 11-9762 11-9760 11-9764 11-9765
1988-2003 1200 XL, 1986-1987 1100 XL Evolution 10.5:1 Compression. Piston Kits include
Hastings X-Ring Pack
Standard .010 .020 .030 .040
Piston Kit 11-9913 11-9914 11-9915 11-9916 11-9917
Rings 11-9759 11-9762 11-9760 11-9764 11-9765
S&S Button Style Keepers control 2004-up 1200 XL Evolution 10.5:1 Compression. Piston Kits include Hastings X-Ring Pack.
wrist pin end play which varies with Standard .010 .020
bore size. Button style keepers must be Piston Kit 11-9954 11-9955 11-9956
fully supported by wrist pin hole. Sold Rings 11-9759 11-9762 11-9760
in pairs. 3³⁄₁₆” bore, standard to +.070,
Aluminum.VT No. 11-2170 Wiseco Replacement Wrist Pins
are sold each.
Wiseco Replacement Circlips fit all 3³⁄₁₆” bored VT No. Bore Size
pistons, sold as a pair. 11-9776 3³⁄₁₆” and 3⁷⁄₁₆”
VT No. 11-9779 11-9852 3¹⁄₂” 883 Evolution
Wiseco Tracker Series Piston Sets feature Armor Glide skirt

coating for reduced friction, quieter operation, pressure seal
groove reduces ring lifting and power loss, forged piston crown
with generous valve pockets for big valves and cams, and preci-
sion at rings for ultimate sealing power.
Size Piston Kit Repl. Ring Repl. Wrist Pin Repl. Circlip
883 XL Evolution Overbore to 1200cc. 9.5:1 Rev. Dome Compression 3 1/2"
Bore. *Note: 2009-up cylinders cannot be overbored. Requires the purchase of
1200cc cylinder to be used with piston kit.
STD 11-1323 11-9759 11-9852 11-9773
.010 11-1324 11-9762 11-9852 11-9773
.020 11-1325 11-9760 11-9852 11-9773
.030 11-0340 11-9764 11-9852 11-9773
1986-up 883 XL Overbore to 1200cc Rev Dome 10:1 Compression 3 1/2" Bore.
Piston Kit includes Hastings X-Ring Pack. *Note: 2009-up cylinders cannot be
overbored. Requires the purchase of 1200cc cylinder to be used with piston
See Tool section kit.
for more about Stand 11-1327 11-9759 11-9852 11-9773
our Motor Shop .010 11-1328 11-9762 11-9852 11-9773
Services! .020 11-1329 11-9760 11-9852 11-9773
.030 11-1330 11-9764 11-9852 11-9773
856 note on Emission Page for important information regarding emission control regulatory compliance and warranty information.
V-Twin
Piston
Kit
V-Twin Piston Kits include Piston Sets use 22588-78 Pin Lock, VT No. 12-0929
Replica Type
two cast alloy pistons, genuine COMP STD 9:1 STD 9:1 LC 8.4:1 STD STD STD 86-03
Hastings three piece ring set, 900cc XL 1000cc XL 1000cc XL 883cu V2 1100cc V2 1200cc V2
Dia. 3” Bore 33/16” Bore 33/16” Bore 86-03 Evo 86-87 Evo 88-03 Evo
two wrist pins and four circlips. STD 11-0200 11-0208 11-0300 11-0241 11-0246 11-9761
.005 11-0242 11-0247 11-9849
Over 100,000 Kits Sold Since .010 11-0201 11-0209 11-0301 11-0243 11-0248 11-9767
1978! .020 11-0202 11-0210 11-0302 11-0244 11-0249 11-9768
.030 11-0203 11-0211 11-0303 11-0245 11-9769
11-0869 Wrist Pin and Lock Kit. .040 11-0204 11-0212 11-0304 11-0440 11-0441 11-9712
VT No. Year/Model .050 11-0205 11-0213 11-0305
11-0869 1957-85 XL .060 11-0206 11-0214 11-0306
11-0872 1986-03 1100-883 XL .070 11-0207 11-0215 11-0430
11-0873 1988-03 1200 XL Wrist Pin Locks, 10 packs.
12-0929 1978-85
12-0929 12-0949 12-0949 1986-up
Big Bore Pistons

883 to 1200cc Conversion Piston Kits include rings, wrist pins 11-1680 11-1700
and circlips.
1986-up. *Note: 2009-up cylinders cannot be overbored. Requires the
purchase of 1200cc cylinder to be used with piston kits.
VT No. Item Brand Comp Ratio
XL
11-1680 Piston Kit Standard Sifton 9.5:1
11-0852 Piston Kit Standard Sifton Moly Coated 9.5:1
11-1700 Piston Kit .005 OS Sifton Moly Coated 9.5:1
Top End Gasket Set fits Big Bore kits.
Head base gasket set with .040 gasket,
beaded, blue veloprene coated with 4
O-Rings. Fits 1986-2003.
VT No. 15-0393
KB The Keith Black 390 Hypereutectic alloy is cast in a perma-

nent steel mold which makes it possible to build a light weight
PERFORMANCE piston that makes more power, runs quietly, uses less fuel and
lasts longer than any other type of piston being made today. We
PISTONS can now forget about running loose, noisy, oil-burning pistons.
*Note: 2009-up cylnders cannot be over-
The low heat transfer of the alloy keeps the skirts cool so piston
bored. Requires the purchase of 1200cc
cylinder to be used with piston kit.
expansion is minimal.
The KB piston will make maximum power at 2 to 4 degrees less
Engine 1000cc 1200cc 1200cc 883 total timing than conventional pistons. All KB pistons sets are
to1200cc supplied with Hastings Moly Ring sets.
Sportster Evolution Evolution Conversion RING END PISTON TO WALL
Model XLH-XLCH XL XL 1988-03 XL APPLICATION GAP FACTOR CLEARANCE
Years 1972-85 1988-03 w/High Street Normally Aspirated .0065” .00075”-.0015”
Cams Street Nitrous or Supercharged .0080” .0015”-.0025”
C.I.D. 61” 74” 74” 74” Flat Track Gasoline .0080” .0010”-.0030”
Bore 3.188” 3.498” 3.498” 3.498” Flat Track Alcohol .0060” .0010”-.0030”
Stroke 3.812” 3.812” 3.812” 3.812” Drag Gasoline .0075” .0010”-.0030”
Head Type Dome Flat Top Flat Top Dish Drag Alcohol .0065” .0010”-.0030”
Cyl Height 5.330” 4.650” 4.650 4.650” Drag Supercharged or Nitrous Gas .0095” .0015”-.0030”
Comp. Ratio 8.2 9.0:1 8.9:1 10.0:1 Drag Supercharged Alcohol .0085” .0010”-.0030”
Standard 11-2210 11-2245 11-2228* Drag Supercharged Fuel .0115” .0020”-.0040”
.005 11-2229* Note: It is important to use our ring end gap instructions to avoid ring butting.
.010 11-2241 11-2212 11-2247 11-2230* Safe top ring end gaps can be found by multiplying the bore diameter by the
appropriate ring end gap factor from the adjoining chart.
.020 11-2242 11-2248 11-2231* Example: 3.5” bore “Street Normally Aspirated” = 3.5” bore x .0065” = .023” top
.030 11-2243 11-2214 11-2232* ring end gap.
.040 11-2215 11-2250 11-2233* Note: Second ring end gaps do not need extra clearance.
857
RING SETS
Hastings Piston Ring Sets are replacements for
OEM ring sets and will also fit our cast pistons.
Available in standard or oversize versions with either
a cast or moly compression ring and 3-piece oil ring in
cast or moly construction. Sold in sets for two pistons.
1000cc
883cc 1200cc XL Evolution 1200cc XL Evo- 1100cc XL
Model 1000cc XLH-XLCH XLH-
XL Evo 1988-03 lution 1988-03 Evolution
XLCH
Moly Cast Moly Cast Cast Moly Moly Moly

2M6198 7003 2M7003 6457 6164 2M6164 2M6199
Bore 3” 3 3/16” 3” 3 1/2” 88.85mm (3498) 3.350”
Comp. 1.5mm 1/16” 1/16” 1/2” 1.2mm Top Ring 1.5mm
Ring 1.5mm 2nd Ring
Oil Ring 2.5mm 3/16" 3/16” 5/32” 2.5mm 2.8mm
Standard 11-0160 11-0109 11-1377 11-0100 11-0190 11-1357 11-1394 11-0165
.005 11-0161 11-0191 11-1358 11-1395 11-0166
.010 11-0162 11-0110 11-1378 11-0101 11-0192 11-1359 11-1396 11-0167
.020 11-0163 11-0111 11-1379 11-0102 11-0193 11-1360 11-0168
.030 11-0164 11-0112 11-1380 11-0103 11-0194 11-1361 11-0169
.040 11-0174 11-0113 11-1381 11-0104 11-0195 11-1362 11-0175
.050 11-0114 11-1382 11-0105
.060 11-0115 11-0106
.070 11-0116 11-1384 11-0107
.010 Total Seal Ring One Piece Cast Iron Ring Sets
Set includes rings for 2 for 2 pistons with one piece oil
pistons with a top ring of ring.
ductile cast iron, the gap- Dia. 1000cc
less-middle ring and Gold XL 3³⁄₁₆”
Power 3-pieces design oil Bore 61”
rings. Fits 883 Evo V2 .010 11-2514
Mfg.# 8916. .020 11-2515
VT No. 11-1828 .030 11-2516
.040 11-2517
.050 11-2518
.060 11-2519
.070 11-2520
Tool
Piston Pin Tools
16-1888 VT No. Item/Use Fits
16-0075 Wire Type Wrist Pin Circlip 1984-94 FXR
16-1888 Piston Ring Lock Tool 1973-77 FL, 1976-77 FL
16-0075 16-1757 Piston Pin Lock Tool 1952-72 FL, 1971-72 FX
16-1831* Piston Pin Lock Tool 1973-77 All Models
16-1831 *Note: Installs Ring 22582-52 in piston with wrist pin of .535 I.D.
16-1757
858
V-Twin Cylinder
Head Copper
Gasket Set are sold 15-1612
Gasket
as a set.
VT No. 15-0102
15-0258 15-0366
Cylinder Head Gaskets. 15-1613
GB No. James OEM Fits
15-0257 — — 86-2000 883 Fire Ring
15-0258 — — As Above Fire Ring
15-0366 15-1082 16773-86B 88-2000 1200 Fire Ring
— 15-1083 — As Above .045”
— 15-1132 — As Above .030”
15-0643 — — As Above Graphite
— 15-1012 16769-57 1957-71 Veloprene Coated
15-0101 15-0973 16769-72A 1972-E73 Copper
— 15-1130 16769-73T 1973-85 Veloprene Coated 15-0602
15-0102 15-0974 16769-73 1973-85 Copper
15-0189 15-1015 16769-82 1973-85 1000 Copper (.045”)
14-0516 — 26432-76A 86-2000 Stud O-Ring
GB Head/Base Gasket Sets
have .040 special copper head
gaskets and .007” thick aluminum
base gaskets, will not compress or
torque. Kits include two head and GB Top End Gaskets for Sportster models.
15-0313 two base gaskets. VT No. OEM Years Fits
VT No. Year Model 15-0600 17030-57 1957-71 900cc
15-0313 1986-91 1200 15-0601 17030-72 1972-E731000cc
15-0675 1989-03 883 15-0602 17030-73 1973-76 1000cc
15-0603 17032-79 1977-81 1000cc
XL
15-0618 17032-82 1982-90 1000cc
— — 1983 XR-1000
15-0636 17030-86A 1986-89 1100 Evolution
15-0639 — 1988-90 1200 Evolution
15-0105 15-0106 15-1126
15-0053 17032-86B 1991-03 883 Evolution
15-0662 17032-91 1991-03 1200 Evolution
15-0054 17027-04 2004-up 883
15-0055 17049-04 2004-up 1200 Evolution
15-0863
15-0317
15-0235
15-1534
15-1287 Rocker Cover Gasket Kits for Evolution include upper and lower gaskets in
cork or molded O-Ring type with bolt seals and washers for both heads.
Cylinder Base Gaskets. James GB Type/Fits
GB No. James OEM Fits 15-0862 — O-Ring
1986-90 883-1100-1200
15-0105 15-0982 16774-57 1957-71 Front and Rear, 900cc
15-1363 — As Above Includes Metal
15-0106 15-0983 16774-72 1972-85 Front and Rear, 1000cc Rocker Base Gaskets
15-1126 — As Above Metal with seal — 15-0317 Cork
Coating and Bead 1986-90 883-1100-1200
— 15-1121 16774-86A 1986-2003 w/seal coat .022" thick 15-0863 14-0931 O-Ring
— 15-1373 As Above .016" Thick 1991-03 883-1200
— 15-1374 As Above .010" Thick — 15-1621 As Above w/1 piece EST
Lower Rocker Gaskets
15-0235 15-0984 16774-86D 1986-2003 Black
15-1364 — As Above Includes Metal
15-1534 — 16789-04 2004-up Black Rocker Base Gaskets
15-1287 — 16774-86D 1986-03 Beaded 15-1454 — 2004-06 883-1200
15-1455 15-0786 2007-up
15-1622 As Above w/1 piece EST
Lower Rocket Gaskets
859
Gasket Kits for XL’s 15-0813
15-0501
Sportster Complete Engine Gasket by James.

VT No. OEM Year Models
15-0809 17026-71 1957-71 XLH-XLCH
(Veloprene Coated Head Gaskets)
15-0813 17026-73 1972-85 XLH-XLCH
15-0661 (.032 Copper Head Gaskets)
15-1178 17026-86 1986-90 883-1200 XL
(Veloprene Coated Head Gaskets/Rubber Rocker Gaskets)
15-1366* 17026-86 1986-90 1200 XL
(Includes MLS Head Gaskets)
15-0818 17026-91A 1991-03 883-1200 XL
(Graphite Head Gaskets/Rubber Rocker Gaskets)
15-1367* 17026-91A 1991-03 1200 XL
(Includes MLS Head Gaskets)
15-1450 17047-04 2004-06 883-1200 XL
15-1451 17047-07 2007-up 883-1200 XL
*Note: For 883 applications order head gaskets separately.
15-1180
Engine Gaskets for Sportster Models by GB.
VT No. OEM Years Models
15-0500 17026-70 1957-71 900cc
15-0501 17026-71 1972-E73 1000cc
15-0502 17026-73 1973-76 1000cc
15-0503 17026-79 1977-78 1000cc
15-0634* 17026-82 1982-85 1000cc
15-0523 17026-83 1983 XR-1000
15-1605 17026-86 1986-90 Top End Sets by James.
15-0633 17026-86 1985-89 883 Evolution VT No. OEM Years Models
15-0632 17026-86A 1986-89 1100 Evolution 15-0827 17030-57 1957-71 XL(Veloprene Coated Head Gaskets)
15-0691 17026-88 1988-90 1200 Evolution 15-0828 17030-72 1972-85 XL (Copper Head Gaskets)
15-0661 17026-91A 1991-03 1200 Evolution 15-1180* 17030-86B 1986-90 1200 XL
*Note: Contains the thick low compression type head gasket. VT (Veloprene Coated Head Gaskets/Rubber Rocker Gaskets)
15-1365* 17032-86 1986-90 1200 XL
No. 15-0603 or 15-0504 can also be used for this application if a (Includes MLS Head Gaskets)
higher compression ratio is desired. 15-0835* 17032-91 1991-03 1200 XL
(Graphite Head Gaskets/Rubber Gaskets)
15-1368* 17032-91 1991-03 1200 XL
15-0487 (Includes MLS Head Gaskets)
15-0475 15-1452* 17049-04 2004-06 1200 XL
15-1453* 17049-07 2007-up 1200 XL
*Note: For 883 applications order head gaskets separately.
Metal Cylinder Base Gasket has a steel base
GB Three Piece Rubber Coated Gaskets. A three piece metal which has been coated on both sides with
design that features a stainless center sandwiched between a specially formulated high temperature oil resis-
two rubber coated stainless spring steel outer layers. The outer tant rubber compound. Silicone beading around
layers are embossed at the oil drain hole and cylinder bore the inner and outer perimeter forms a seal
area that provides a correct seal. Sold in pairs. Fits Evolution on both sides of gasket, pairs. Available from
Sportster. James. Fits 1986-up XL Evolution.
Cylinder Base Gaskets VT No. 15-1121
Size 3¹⁄₂” Bore 3⁵⁄₈” Bore 3¹³⁄₁₆” Bore 3³⁄₄” Bore Rocker Box Gaskets.
VT No. James OEM Year 15-0640
1986-99 XL, 883-1200
15-0112 15-1003 17536-70 1957-84
.010 15-0487 15-0489 — — 15-0640 — Beaded 1957-84
.020 15-0488 15-0490 — — — 15-1270 Metal w/bead 1957-84
Head Gaskets 1986-99 XL 15-0366 15-1134 17353-86 1986-up
.030 15-0475 15-0477 15-0479 15-0481 15-0260 15-0991 17353-86 1986-up Lower (Cork)
.040 15-0476 15-0478 15-0480 15-0482 — 15-0993 17354-86A 1986 Upper
15-0386 15-1135 17354-86A 1986-90 Upper
14-0933 15-0992 17353-89 1989-up Lower
860 — 15-0994 17354-89 1991-up Upper
1957-76 XL Oil Pump
Complete includes all parts
assembled. Hardware is sold
1954-76 XL-XLCH
less gears and body.
VT No. Fits OEM Oil Pump
12-9979 1957-66 26217-56 VT No. OEM # Years Item
12-9930 1967-76 26204-67 12-9930 26204-67 1967-76 Complete Pump
12-0177 1957-76 Hardware Kit 12-1524 240 A 1961-71 Feed Pin
12-1160 603 A 1972-76 Roll Pin
12-0158 8873 B 1954-76 Check Ball
Oil Pump Parts, the small 9095 C 1961-76 Dowel
parts are available in packs of 12-0901 11002 D 1955-62 Retainer
10. The major parts are sold 1972-76
each. Fits 1952-76 all XLH- 8814-15 24819-52 EF 1952-E71 Stud and Nuts
XLCH Sportster models. 8815-15 24819-52 EF As Above Cadmium
9614-10 — L1971-76 Stud and Nuts
15-0311 12-0154 25276-52 G 1954-73 Screen
12-1410* 26214-72 H 1972-76 Body
14-0114 26227-58 I 1958-76 Seal
12-9904 26241-52 J 1954-76 Cover
12-9946 26250-56 K 1956-76 Plate
12-8950** 26331-52 L 1952-55 Breather Valve Gear
Oil Pump Gasket Kits for 12-8951** 26331-56 L 1956-59 Breather Valve Gear
Sportster. 12-8952** 26331-60 L 1960-71 Breather Valve Gear
James VT No. Years 12-8953** 26331-72 L 1972-76 Breather Valve Gear
15-0849 15-0311 1952-76 12-9947 26331-72 L 1972-76 Breather Valve Gear
12-9948 26315-72A M 1972-76 Scavenger Gear
12-9949 26317-72A N 1972-76 Scavenger Idle Gear
12-9950 26322-52A O 1954-62 Idler Gear
1972-76
12-9951 26323-52A P 1954-62 Gear, Feed
12-0421 12-1377 Oil Pump Drive Gears. 1972-76
VT No. OEM Fits 15-0942 26256-52 Q 1954-76 Gasket, Case
12-0421 26318-37 1957-76 15-0945 26258-52 R 1954-62 Outer Gasket
12-1380 26318-75 1977-87 1972-76
12-1377 26318-88A 1988-up
XL
15-0946 26258-62 R L1962-71 Outer Gasket
15-0950 26259-52 S 1954-62 Inner Gasket
Machined Oil Pump Body replaces 26214-72 1972-76
for 1972-76 XL models, accepts later gears as 15-0951 26259-62 S L1962-71 Inner Gasket
listed below. Includes gear dowel pressed. 12-0800 26327-52 T 1954-76 Idler Shaft
VT No. 12-1410 12-0204 26340-36 U 1960-71 Key
12-0205 26348-15 U 1972-76 Key
12-9949 12-0214 26341-37 V L1962-71 Retainer Half
13-0115 26364-57 W 1957-72 Check Spring
13-0116 26364-72 W L1972-76 Check Spring
26420-57 X 1957-76 Fitting
12-9948 12-9950 12-9951
32-0427 26552-72 Y 1954-76 Switch
Pump Gears for 1972-76 XL.
37-8777 45830-48 Z 1958-76 Plug
VT No. OEM Type
40-0566 63533-41 AA 1967-76 Feed Fitting
12-9948 26315-72A Scavenger
8816-10 Chrome 1954-76 Allen Bolts
12-9949 26317-72A Scavenger Idle 8817-10 Chrome 1977-90 Allen Bolts
12-9950 26322-52A Idle 9806-8 Chrome 1977-90 Acorn Kit
12-9951 26323-52A Feed *Note: 1972-76 body may be fitted on earlier models if later
12-1541 12-1511 12-1512 gears are substituted.
**Note: GB Brand
32-0428 32-0427
Oil Pump Breather Parts.
VT No. OEM Item
12-1541 — Breather Kit 12-1290
12-1542 — Oil Strainer Kit
12-1290 25265-63 Deflector
12-1512 24975-37 Oil Strainer 1954-76 XL
Oil Pressure Switches are precision calibrated.
12-1173 333 Pin, 10 pack
VT No. OEM Year Engine
15-0214 24978-57 Gasket, 10 pack
32-0427 26552-72 1954-76 900-1000
12-1511 25075-55 Oil Transfer Valve, 1957-76 XL
32-0428 26554-77 1977-up XL
40-0121 24912-52 Breather Pipe, 1954-78 XLH-
12-1488 26420-57 Fitting
XLCH Chrome with fitting nut
32-1159 1955-70 900
40-0546 24918-52 Nut only for Above
861
Oil Pump Assembly 1977-up
Oil Pump Seals.
12-1562 James GB No. OEM Fits
14-0109
14-0611 14-0109 12036A 1977-90
14-0623 14-0114 26227-58 1958-90
12-1563
Acorn Screw Allen Screw

XL Oil Pump Mounting Kits.
12-9929 12-1590 Hex Chrome Hex Cad Allen Acorn Years
8814-15 8815-15 8816-10 — 1952-Early 71
9614-10 — 8816-10 — Late 1971-76
— — 8817-10 9806-8 1977-90
— — 9774-8 9775-8 1991-up
Oil Pressure Switch is precision calibrated.
Replaces 26554-77. Fits 1977-up.
VT No. 32-0428
Complete Oil Pumps are fully assembled. Fit 1977-up.
12-1562 26197-83 1977-85 Complete
26204-75 Oil Pump Gasket Kits for Sportster.
12-1563 26204-86 1986-90 Complete James VT No. Years
12-9980 26488-75 1977-90 Shaft w/Gear only 15-0850 15-0613 1977-90
12-0957 26497-75 1977-90 Retaining Ring
15-1225 — 1991-up
12-9929 26204-91A 1991-up Complete
15-1372 — 1991-up w/DL Style
12-9981 26488-91 1991-up Shaft w/Gear only
10-0749 26431-76 1977-90 Cover Bushing Gasket
10-0750 26489-75 1975-90 Body Bushing 15-0613
12-1590 Fitting Kit
40-0566 63533-41A
40-0984 62601-91A
Gas and Oil Fittings
Oil Line Fitting Set, zinc Oil Lines
15-0199 26495-89B Oil Pump Mount Gasket, 10 pk
Oil Pump Drive Gears for XL.
40-0116
12-1380 26318-75 1977-87
12-1380 12-1377 26318-88A 1988-up Chrome Oil Line Sets for Sportster rocker boxes which
Oil Pump Gaskets. include fittings and seals.
GB No. James OEM Fits Chrome Zinc Fits Type
15-0129 15-0942 26256-52 1957-76 Body to Crankcase 40-0115 40-1009 1957-84 Coil
15-0945 15-0945 26258-52 1957-E62;1972-76 Outer Cover 40-0116 40-1007 1957-70 Magneto
to Body 40-9986 40-1008 Fittings for Above, 4 pack
15-0133 15-0946 26258-62 1962-71 Outer Cover to Body 14-0147 63529-57, Seals only, 100 pack
15-0135 15-0950 26259-52 1957-E62; 1972-76 Body to 14-0930 As Above Red Silicone, 50 pack
Inner Cover
15-0136 15-0951 25259-62 1962-71 Body to Inner Cover Stainless
15-0199 15-0961 26435-75 1977-90 Pump Mounting Steel Braided
— 15-1436 As Above, Foamet® Overhead
15-0684 15-0962 26495-89A 1991-up Pump Mounting Rocker Arm Oil
— 15-1437 As Above, Foamet® Lines fit 1957-84
Shims for XL’s. Sportster.
VT No. OEM Use VT No. 40-0242
12-0711 6732B Pushrod
12-0704 .005 Rocker Arm
12-0710 .007 Rocker Arm 12-0704
12-0715 .015 Rocker Arm
12-0705 6769 .007 Cam (1, 3, 4)
12-0706 6770 .005 Cam (1, 3, 4)
12-0716 6771 .015 Cam (1, 3, 4)
Breather Pipe replaces 24912-52A on 1954-78 XLH-XLCH,
12-0717 6773 .005 Cam (#2)
chrome with fitting nut.
12-0718 6775 .010 Cam (#2)
VT No. Finish
12-1258 6778 .015 Cam (#2)
40-0121 Chrome
12-0709 6802 Starter Crank
12-0713 .003 Sprocket Shaft 1952-76 40-0904 Zinc
12-0714 .003 Sprocket Shaft 1976-up
862
Motor Shop Services Sportster 4-Speed Mainshaft Gear
Cluster Assemblies. Each shaft is assembled with correct
thickness thrust washers and snap ring for proper gear clear-
ance. Also included is shaft end play washer assortment for
proper end play shimming during installation.
Mainshaft Assemblies
17-1252 VT No. Year
17-1250 1956-69 XLCH
17-1251 1967-70 XLH Only
17-1252 1971-E84
17-1253 Late1984-86
17-1254 1987-90
4-Speed Transmission Installation Tips

VT No. 17-0028, 17-0027, 17-0032, 17-0030, 17-0033, 17-0034, 17-0031, 17-0029
All XL Transmission assemblies are bench tested for positive gear engagement and disengagement but it is always best for a
final check after unpacking transmission before being installed.
All V-Twin Transmissions are assembled with late style shifter cam plate that uses welded in pin for neutral switch indicator. On
some early(Pre 1974) case this pin may have to be shortened or removed to allow cam plate to move freely. Failure to check
this will cause transmission to not completely shift through all gears. This should be checked first prior to assembly.
Gear Engagement Check
Rotate pawl carrier (EE) until pawl carrier contacts lifter arm (Y+X). Hold the shifter cam (D) with opposite hand to prevent cam
follower (I) from completing gearshifts. If hand pressure is released from shifter cam the gears will be drawn into complete
engagement and all inspection procedures will be performed incorrectly.
Shift transmission into first gear then check gear to dog Pocket Engagement. Correct engagement should be 25%.
Shift transmission into all other gears checking Pocket Engagement, which must be at least 50%.
Filing of lifter arms (Y+X) will produce changes in Pocket Engagement.
Establishing Mainshaft and Countershaft Endplay
XL
Use the thinnest low gear washer and mainshaft washer. On 1954-early 84 models the mainshaft thrust washer must be
installed with Tang Down. For 1954-early 1984 models the mainshaft needle bearing will have to be installed. Temporarily install
access cover to crankcase with all transmission parts. Carefully align Cover Dowel Pins and with a rawhide mallet tap into posi-
tion and install four cap screws.
When installing transmission into case check shift fork shaft for correct alignment to case. Do not force transmission into case if
shift fork shaft will not go in to case. If shift fork shaft is forced into case damage or bending to shaft will happen causing shifter
roller finger to bind against shifter cam plate or shifter fork binging on shaft or with pawl carrier assembly.
On 1954-E84 Models Inspect case race and rollers, if badly pitted scored or worn they should be replaced. Correct fit of main
bearing is .0006in-.0014in. If clearance is beyond specified limit a new race and bearings must be installed, and line lapped for
proper fit. Note: Fitment of door to case may sometimes requires reaming of holes in access door or removal of alignment pins
from case. If removal of dowel pins is necessary tapping dowel pin holes and use of additional bolts is suggested.
Note also that even during factory assembly process several access doors were tried before final assembly.
Using a Dial Indicator measure mainshaft endplay from sprocket side of shaft, press against clutch gear so that bearing seats
against lock ring in access cover. Move shaft back and forth and measure endplay while holding clutch gear in. If endplay is not
with specification (see chart) install thrust washer of suitable size.
With access cover still in place bend a discarded spoke or other suitable wire and wedge into hole on end of countershaft. Push
and pull countershaft and measure endplay with dial indicator. If endplay is not within specification (see chart) install counter-
shaft washer of suitable size.
After countershaft endplay has been established install oiler plug in access cover with oil hole up.
Note: On 1959-early 84 models the clutch must be temporarily installed and the 1984-85 models the Stator spacing ring and the
Stator must be installed on access door before above Endplay clearances can be established.
When Mainshaft and Countershaft end play established install new shifter shaft into the crankcase so that the shifter lever arm
is centered. Using a grease pencil mark the shaft at the 12 o’clock position by marking the shaft you can tell if the shifter lever
arm position changes when installing the transmission. Correct shaft to shifter pawl yoke engagement is important for proper
gear shifting. Install transmission and rotate countershaft slowly to check that the gear shift arm is engaged with shifter pawl. To
do so rotate shift lever, a noticeable resistance to movement indicates proper engagement.
863
4-Speed 1984-90 Units
include Billet door
by Sifton
17-0031
Transmission
17-0028 17-0030
17-0039
17-0033
17-0027
17-0029
17-0034
17-0032
Complete XLH-XLCH 4 Speed Transmission Gear Assembly

Unit includes gears, mainshaft, countershaft, shift forks and
shafts assembled to trap door. Order right side case races, roll-
ers, shims and bearings separately. Shift selector shaft included.
VT No. Years
17-0028 1956-66 XLH-XLCH, 1967-69 XLCH
Transmission End Play Specifications
17-0027 1967-70 XLH, 1970 XLCH 1956-78 1979-Early84 Late1984-85
17-0032 1971-72 XLH-XLCH Countershaft 0.004-0.009 0.007-0.015 0.004-0.015
17-0030 1973-74 Mainshaft 0.003-0.009 0.003 0.003
17-0033 1975-76
17-0034 1977-84
17-0031 Late1984-85
17-0039 1986
17-0029 1987-90
Note: Main and countershaft end play and trap door alignment
with case must be established and adjusted before final assem-
bly.
Batch of Transmissions Assembled! Watch video on 4 Speed

Transmission with QR code.
864
5-Speed Trans Gear
1991-03 5-Speed Gear Sets Super Close Ratio 1st, 2nd,
are available as kits which 3rd, 4th“Y” gear sets will put
include: 1st gears, 2.68, more usable torque where it
counter and main, 2 pieces; belongs-at high RPMs. 2 gears
2nd gears, counter and main, 17-9717 per set.
2 pieces; 3rd gears, counter
VT No. Ratio Gear
and main, 2 pieces; 4th gears,
17-9717 2.026 1st
counter and main, 2 pieces;
17-9727 1.670 2nd
5th gears, counter and main, 2 pieces, countershaft,1 piece;
17-9737 1.364 3rd
and mainshaft, 1 piece.
17-9747 1.158 4th
VT No. 17-6015
Medium Close Ratio 1st and 2nd for drags 17-9110 17-9101 17-9103
17-9816
and modified street bikes needing closer ratio
shifts through 1st and 2nd gear, ratio “S” gear
sets will be a distinct advantage. Set of 2 gears.
VT No. Ratio Fits
17-9816 2.368 1st gear set 1991-03
17-9144 17-9105
17-9104
17-0956 17-9180
17-9153
1994-03 5-Speed Trans Doors Stock.
VT No. OEM Item Type 17-9170
17-0956 25238-94 Door Stock
37-8935 16573-83 Insert Stock
17-0723
5-Speed 1991-up Gears and Shafts.
XL
1991-up 5-Speed Transmission Hardware. VT No. OEM Item Type Brand
VT No. OEM Item Fits 17-9110 Set 2.61 close ratio 1991-03 Andrews
2 piece 1st gear set 1991-03 Andrews
12-1159 11019 Retaining Ring 1991-03
17-9101 35771-89 2nd main/3rd counter 1991-03 Andrews
12-0905 11031 Retaining Ring 1991-03 17-9103 35772-89 3rd main/2nd counter 1991-03 Andrews
12-0968 33653-90 Retaining Ring 1991-03 17-9104 35773-89 4th gear/Main 1991-03 Andrews
13-9225 34481-91A Spring 1991-03 17-9144 35775-89 4th gear/Counter 1991-03 Andrews
13-9232 34491-91 Spring 1991-03 17-9105 35034-89 Main drive gear 1991-03 Andrews
17-9853 6003 Thrust washer 1991-up 17-9153 35633-89 Counter drive gear 1991-03 Andrews
12-0366 8876A Bearing, 4 pc 1991-up 17-9180 35640-89 Mainshaft 1991-03 Andrews
12-0339 8977 Bearing, closed end 1991-up 17-9183 35640-89 Mainshaft 1991-03 V-Twin
12-0361 8996A Ball Bearing 1991-up 17-9182 35641-89 Countershaft 1991-03 V-Twin
12-0928 11067 Retaining Ring 1991-up 17-9170 35641-89 Countershaft 1991-03 Andrews
12-0952 11161 Retaining Ring 1991-up 17-0723 35163-06 Mainshaft 2006-up V-Twin
14-0534 11165
14-0918 12030
14-0962* 12067B
Quad Seal
Oil Seal
Oil Seal
1991-up
1991-up
1991-up B
Drain Plug
17-0560* 33344-94 Spacer, Belt 1994-up
12-9997 35051-89 Needle Bearing 1991-up Engine and Transmission Drain Plugs.
17-0588 35063-89 Spacer 1991-up A. Chrome dome head plug with an oversize thread and one
17-9851** 33334-85 Spacer 1985-93 tap for rethreading the stripped out drain hole. Fits 1965-up
O.H.V. Big Twin and 1967-up Sportster w/4 -Speed transmis-
*Note: Use on 1991-up with rear belt. sion.
**Note: Use on 1991-up with rear chain. Requires 14-0616 seal. VT No. Type
Speed Main Drive Drive Seal Spacer 7502-2 Plug and Tap
5 17-9105 Belt 14-0962 17-0560 7503-1 Plug Only
5 17-9105 Chain 14-0616 17-9851 B. Stock style of drain plug and brass gasket used on Sportster
transmission and motor case also oil tank with 1/2”-13 thread.
VT No. Finish
8494-1 Chrome
8494-1T Chrome
8495-1 Cadmium
8495-1T Cadmium
15-0194 Brass Gasket
15-1158 Brass Gasket James 865
4-Speed A B C
XLH-XLCH Gears
A 17-1140 B 17-1141
17-1122 17-0168 17-1119
D E F
C 17-1142 D 17-9760
E 17-9826 F 17-9146 17-9825 17-5621

1st and Countershaft Drive Gear.
VT No. Andrews # OEM Teeth Shaft Fits
17-1122 17-1050 A 35277-52A 27 Main 1954-90
17-1053 — Sifton 27 Main 1954-90
17-0168* — B 35760-54 17 Counter 1954-72
17-4850 Set 17-1119 17-1060 C 35760-73 17 Counter 1973-83
17-9825 — D 35760-84A 17 Counter 1984-90
— 17-8580 E 35695-58 27 Counter 1958-86
17-5621 17-5620 F 35695-87 26 Counter 1987-90
17-1143 — E Sifton 27 Counter 1958-86
*Note: Includes speedometer drive gear.
Clutch Gears for Sportster, 17 tooth, includes bushing and
Torrington needle bearing. A B C D
Andrews VT No. # OEM Fits
— 17-1140 A 37449-56 1956-66 XLH-XLCH
— 1967-69 XLCH
— 17-1141 B 37448-67 1967-70 XLH, 1970 XLCH
17-8710 17-1142 C 37448-71 1971-E79 XL’s
17-8711 17-9760 D 37448-79 L1979-E84 XL’s 17-1123
— 17-9826 E 37448-84A L1984-86
17-4850 17-9146 F 37448-87 1987-90, 18T 2nd Gears
VT No. Andrews OEM # Teeth Shaft Fits
17-1126 17-8241 35750-58A C 20 Counter 1958-90
— 17-8242 35296-56A B 23 Main 1956-90
17-6011 17-1123 Sifton 35296-56A 23 Main 1956-90
3rd Gears
VT No. Andrews OEM # Teeth Shaft Fits
— 17-8243 35709-54B D 23 Counter 1954-90
4-Speed Gear Sets For Sportster are available as kits which 17-1124 Sifton 35709-54B D 23 Counter 1954-90
include: 1st gears, counter and main, 2 pieces; 2nd gears, 17-1120 17-8244 35305-56A A 20 Main 1956-90
counter and main, 2 pieces; 3rd gears, counter and main, 2 Andrews “C” Ratio Gear Sets provide true
pieces; 4th gears, counter and main, 2 pieces: the counter- close ratio shifting for XL gear boxes.
shaft, and mainshaft, must be ordered separately. VT No. Fits
1973-78 1979-84 Evolution 4 Speed Brand 17-8721 1979-Early 84 All XL
“W” 1st, Stock 4th 17-4850* Late 1984-90 All XL
— 17-7654 — Andrews 17-5622* Late 1984-90 All XL (Sifton)
“W” 1st, “C”, 4th 17-5622
17-6012 — — Andrews *Note: From 1987-90 all XL models have “C” Ratio Main Drive
Stock 1st, Stock 4th Gears as stock parts. Also fits late 1984 alternator 1000cc models.
17-6013 17-7657 — Andrews Gear Stock Ratio “C” Ratio
— 17-0761 — V-Twin 1st 2.52 2.29
Stock 1st, “C” 4th 2nd 1.83 1.66
17-6014 17-7658 17-7659* Andrews 3rd 1.38 1.26
*Note: Requires use of early countershaft 35613-58, VT No. 4th 1.00 1.00
17-0328, 17-1151 or 17-8248
Andrews Wide Ratio 1st Gear Sets
Needle Bearings feature full compliment roller design.
changes 1st from 2.52 ratio to 2.68 for
VT No. Torrington OEM Type/Use
more low end torque with 21T or 22T
12-0461 12-0326 35690-54 Closed Transmission
trans sprocket. Fits 1973-85. Can also
12-0396 12-0327 35961-52 Open, Transmission
12-0327 be used on 1986-90 models if early type
countershaft is used. VT No. 17-9856
866
4-Speed
Main Shaft
Hardware
Main Shaft Hardware 17-1122 35277-52A G M.S. First Gear, 1954-86, 27T
VT No. OEM # Item 17-1050 As Above G Andrews
12-0308 9025A A Ball Bearing, each 17-8242 35296-56A H M.S. Second gear, 1956-90, 23T
12-9936 9025A A As Above, Torrington Andrews
12-0378 35030-89 A Ball Bearing, 1989-up 5-Speed 17-1120 35305-56A I M.S. Third Gear 1956-90, 20T
12-0958 11006 B Retaining Ring Inner, 1986-up 17-8244 As above I Andrews
12-0965 11180 B Retaining Ring, 1984-90 Outer 12-0932 35337-56 J 1956-up Snap Ring
12-0930 35112-52 B Retaining Ring, 1954-Early 84 17-1128 35326-73 K Thrust washers .080, 54-78, 5 pack
12-0966 35112-84 B Retaining Ring Inner, Late 1984-85 17-9752 35326-Set K Set 15 pc .030-.125 54-78 Right
17-1165 35044-56 C Mainshaft, 1956-69 XLCH-XLH 17-9236 35385-84 K .067 Right Side 1984-90, 5 pack
1967-69 XLCH 17-9237 35384-84 K .072 As above
17-8080 As above C Andrews 17-9238 35383-84 K .079 As above
17-1166 35046-67 C Main Shaft, 1967-70 XLH 17-9239 35382-84 K .084 As above
17-1167 35046-71A C Main Shaft, 1971-E84, XL’s 17-9240 35381-84 K .090 As above
17-8120 As above C Andrews 17-9241 35380-84 K .096 As above
17-9982 35036-84A C Main Shaft 1984-90 XL’s 17-9247 35385-Set K 1984-90, .067-.096, Six Piece Set
Main Shaft Oil Seals 17-9930 35360-Set K 1979-83, .098-.125, Four Piece Set
17-1160 1952-E1984 17-1129 35363-52 L Thrust washer
14-0150 L1984-1990 17-1127 35364-56 M Thrust washer
XL Trans Main Bearing Race. 17-0089 35356-86 M Thrust washer
VT No. OEM # Years Size 12-0327 35961-52 N Needle Bearing
XL
17-1136 35105-52 D 1954-83 Standard 17-1140 37449-56 O Clutch gear 1956-66 XLH-XLCH
17-1178 As Above D Jims Standard 1967-69 XLCH
17-1137 — D 1954-83 .002 17-1141 37448-67 O Clutch gear 67-70 XLH, 70 XLCH
17-1138 — D 1954-83 .005 17-1142 37448-71 O Clutch gear 1971-E79 XL
17-1180 As Above D Jims .005 17-8710 As above O Andrews
17-1139 — D 1954-83 .010 17-9760 37448-79 O Clutch gear Late79-E84 XL includes
17-9912 — D 1954-83 .020 P, N installed
17-9924 35105-83 D E1984 only Standard 17-8711 As Above O Andrews
17-9925 — D E1984 only .005 17-9826 37448-84A O Clutch Gear Late1984-86, All
17-9927 — D E1984 only .002 17-9146 37448-87 O Clutch Gear 1987-90
12-0359 9118 DD 1984-90 Bearing 17-4850 As Above O Andrews Set (Two Piece)
12-0361 8996 DD 1991-2005 Bearing 10-0751 37458-52 P Bushing, Clutch Gear
17-1182 35041-84 D L1984-90 Standard 10-0764 37538-56 Q End Bushing Clutch Gear
17-1183 — D L1984-90 .002 14-0502 11103 R O-Ring
17-1184 — D L1984-90 .005 14-0127 37531-56B S Seal
12-0931 35113-52 E Retaining Ring 1954-Early 84
17-9913 35216-79 F Thrust Washer .212
17-1125 35361-56 F Thrust Washer
17-1167
XL Transmission Rollers. Available in
set of 23 or 100.
23 Pack 100 Pack OEM Size
17-1147 9095 Standard 17-1166
17-1148 12-4588 9096 .0004 XL Mainshaft
17-1149 12-4589 9097 .0008 Andrews VT No. OEM Fits
17-8080 17-1165 35044-56 1956-66 KH-XL-XLH-XLCH
Oil Seal and Retainer Kit. Metal 1967-69 XLCH
retainer with seal. Replaces 35150-52, — 17-1166 35046-67 1967-70 XLH, 1970 XLCH
includes gasket and screws. Fits all 17-8120 17-1167 35046-71A 1971-E84 XLH-XLCH
1952-Early 1984. VT No. 17-1160 — 17-0143 35046-71A As Above, Sifton
17-8121 17-9982 35036-84A 1984-90 XLH
17-9180 17-9183 35640-89 1991-05 XLH
— 17-0723 2006-up XL
867
4-Speed
XL Countershaft
Countershaft Assemblies
17-1260 1954-72
17-1261 17-1261 1973-E84
17-1262 L1984-86
17-1263 1987-90 1954-E84 Sportster Countershaft Hardware
Note: Washers sold in packs of 5, unless noted.
VT No. OEM # Item VT No. OEM # Item
L1984-85 Sportster Countershaft Hardware 17-9200 35818-72 A .020 17-9231 35821-52 A .055
VT No. OEM # Item 17-9228 35327-73 A .025 17-9232 35824-52 A .060
17-9200 35818-72 A .020 Washer 17-9201 35819-72 A .030 17-9233 35825-72 A .065
17-9228 35327-73 A .025 Washer 17-9229 35328-73 A .035 17-9203 35828-72 A .070
17-9201 35819-72 A .030 Washer 17-9202 35821-72 A .040 17-9234 35829-52 A .075
17-9229 35328-73 A .035 Washer 17-9227 35329-73 A .045 17-9204 35830-72 A .080
17-9202 35821-72 A .040 Washer 17-9230 35820-52 A .050 17-9205 35326-86 A .085
17-9227 35329-73 A .045 Washer 17-1132 Set of 12 A .020, .025, .030,.035, .040, .045,
17-9230 35820-52 A .050 Washer .050, .055,.060, .065, .070, .075
17-9231 35821-52 A .055 Washer 12-0326 35960-54 B Countershaft Bearing
17-9232 35824-52 A .060 Washer 17-9253 35836-55 C .075 Washer
17-9233 35825-72 A .065 Washer 17-9254 35838-55 C .085 Washer
17-9203 35828-72 A .070 Washer 17-9206 35839-55 C .100 Washer
17-9234 35829-52 A .075 Washer 17-9235 35840-52 C .065 Washer
17-9204 35830-72 A .080 Washer 17-1133 Set of 4 C .065, .075, .085, .100 Washer
17-9205 35818-72 A .085 Washer 17-1151 35613-58 D Countershaft
17-1132 Set of 12 A .020, .025, .030,.035, .040, .045, 17-8248 As above D Andrews
.050, .055,.060, .065, .070, .075 17-0328 As above D Sifton
12-0326 35960-54 B Countershaft Bearing 17-8580 35695-58 E Countershaft Drive, 27T Andrews
17-9929 Set of 4 C .047, .056, .066, .080 17-8243 35709-54B F Countershaft Third, 23T, Andrews
17-9831 35613-84 D Countershaft 17-1126 35750-58 G Countershaft Second
17-8580 35695-58 E Countershaft Drive, 27T, Andrews 17-8241 As above G Andrews
17-8243 35709-54B F Countershaft Third, 23T, Andrews 17-0168 35760-54 H Countershaft Low 1958-72
17-1126 35750-58 G Countershaft Second with Speedometer Gear 17T
17-8241 As above G Andrews 17-1119 35760-73 H Countershaft Low Gear,
17-9825 35760-84A H Countershaft Low, 17T 17T 1973-Early84
12-0368 8888 I Low Gear Bearing 17-1060 As above H Andrews
17-9871 35631-73 J Oiler Plug 10-2516 35787-52 I 1st Gear Bushing, 1954-Early72
17-1135 35809-58 K Thrust washer 10-0752 35787-72 I 1st Gear Bushing, Late1972-Early84
17-1134 35841-58 L Thrust washer 17-9771 35631-54 J Oiler Plug 1954-72
12-0327 35961-52 M Countershaft Bearing, Open 17-9871 35631-73 J Oiler Plug 1973-86
1986-90 Sportster Countershaft Hardware 17-1135 35809-58 K Thrust washer
17-9221 35865-86 A&C Thrust washer .030, 17-1134 35841-58 L Thrust washer
17-9223 35864-86 A&C .035 As Above 12-0327 35961-52 M Countershaft Bearing, Open
17-9224 35863-86 A&C .040 As Above SiftonTM Countershafts
17-9225 35862-86 A&C .045 As Above 17-0328 VT No. OEM Year
17-9226 35861-86 A&C .050 As Above 17-0328 35613-58 1954-E84
17-9251 35860-86 A&C .055 As Above 17-9831 35613-84 1984-90
17-9928 Set of 6 A&C .030, .035, .040, .045, .050, .055 17-9182* 35641-89 1991-up
12-0326 35960-54 B Bearing *Note: 5 Speed
17-9831 35613-84 D Countershaft, Sifton
17-5621 35695-87E E Countershaft Drive 26T
17-5620 As Above E Andrews
17-8243 35709-54B F Third Gear, 23T, Andrews 17-0963 35636-52A SPEEDOMETER DRIVE GEAR
17-1126 35750-56 G Second Gear
17-8241 As above G Andrews
17-9825 35760-84A H Low Gear, 17T
12-0368 8888 I Low Gear
17-0371 Ratchet Kick Starter Gear
Bearing Countershaft
17-0380 Inner Kick Starter Gear
17-1135 35809-58 K Thrust washer
17-0464 1991-up Kick Starter Ratchet Gear
17-1134 35841-58 L Thrust washer
17-0973 Transmission Mainshaft Gear, 4th
12-0327 35961-52 M Bearing, Open
17-0974 Transmission Mainshaft Gear, 1st
17-1492 Pawl Carrier Assembly
868
XL Shifter Parts
XL Shifter Pawl
17-1164
17-1171
17-1162
17-1172
Gear Selector Shafts for 1954-up Sportster models.

VT No. OEM # Item VT No. OEM Years
12-0974 638 B Pin Arm Support 17-1164* 34628-54A 1954-74 17-1189
12-0939 11036 C Retaining Ring 17-1186 34628-54 1954-74
17-0061 34012-52C D Cam Plate 1952-76 17-1162* 34627-75 1975-76
17-0502 34012-75B D Cam Plate 1977-90 17-1189* 34628-75 1977-85
14-0116 34035-52 E Oil Seal, 5 pack 17-1171* 34628-86 1986-90
10-0724 34037-52 F Shifter Shaft Brush, pair 17-1172* 34015-91 1991-2003
12-0917 34040-52 G Cam Retainer Ring 17-0987 34014-06 2006-up
17-0086 34060-52 H Thrust Washer 1954-76, each 10-1259 35404-74 1977-up, Thrust washer
17-9911 35336-74 H Thrust Washer 1977-90, each 14-0102 12010 1986-up Oil Seal
17-0076 34062-52 I Shifter Cam Follower 10-0733 40520-63 1979-up Bushing 17-0987
17-0067 34065-52 J Cam Follower Bolt, each 10-0724 34037-52 1954-74 Bushing
3203-4 34065-52 Bolt Kit 14-0160 37101-84 1984-up Oil Seal
17-0923 34067-52 K Cam Bolt Lock Tab
12-1292 16825-48 1954-74 End Plug
17-0751 Kit I,J,K Cam Follower Kit
*Note: All are splined on shift lever end.
17-9845 34063-84 KK Shifter Cam Follower
13-0130 34068-52 L Cam Follow Spring
13-9161 29980-84A LL As Above 1984-up
17-0227 4621 M Shifter Cam Bolt 1954-Early 84
17-0231 3854 M Shifter Cam Bolt Late 1984-90
XL
17-0919 34069-71 MM Bolt Lock, Shift Cam
17-1159 34141-52A N Fork Shaft
17-0118 34168-52 O Roller, Shift Fork, pair
17-1152 34291-52B P STD Steel Shift Fork
17-9793 — +.005 Steel Fork
17-9792 — -.005 Steel Fork
17-1153 — +.010 Steel Fork
17-1154 — -.010 Steel Fork
17-1155 34292-72 +.020 Steel Fork
17-1156 34293-72 -.020 Steel Fork
17-9790 — +.030 Steel Fork
17-9791 — -.030 Steel Fork
17-1175 — Standard Forged Brass Shift Fork
17-1173 — +.010 Forged Brass Fork
17-1174 — -.010 Forged Brass Fork 17-9758
17-1176 — +.020 Forged Brass Fork
17-1177 — -.020 Forged Brass Fork
17-0058 34461-72 Q Shift Pawl Spacer
17-0953 34476-72 R Shift Pawl (2), Sifton
17-0073 34477-53 S Shift Pawl Left, each 1975-76 Shifter Linkage replaces stock pieces for Sportsters.
13-0133 34482-53 T Shift Pawl Spring VT No. # OEM Item
17-0056 34485-52 U Pawl Retainer 12-0938 A 11016 Retainer 17-9781
13-0134 34500-52A V Pawl Carrier Spring 10-2483 B 34037-75 Bushing
17-0055 34503-52 W Pawl Carrier Pin
21-0901 C 34611-65 Rubber
17-0054 34506-52A X Pawl Lifter Arm, Low
17-0053 34507-52A Y Pawl Lifter Arm, High 17-1162 D 34627-75 Shaft, Shifter
17-0233 Set XY Pawl Lifter Arm Set 21-2034 E 34666-75 Lever, Chrome
17-9847 34514-75A Z Pawl Support, 1977-90 17-0065 F 34670-75 Inner Lever
17-9949 34494-74C EE Pawl Carrier 1972-90 23-0421 G 42269-30 Clevis Pins washer and cotter pins
17-0052 34525-70 AA Pawl Retainer 17-9758 H 42548-75 Cross Shaft
17-0065
17-1164 34628-54A BB Shift Shaft 1954-74 17-9780 I 42583-75 Shift Link
17-1162 34627-75 BB Shaft 1975-76 17-9781 J 42585-75 Pivot End, ⁵⁄₁₆” x 24
17-0051 35891-66 CC Shim, Pawl Support 10-2505 K 47757-52 Bushings, 2 pack
13-0137 37222-52 DD Shift Pawl Spring, 1972-90
13-9232 34491-91 DD Shift Pawl Spring, 1991-up
869
Transmission Steel
Components Shifter Cam Follower replaces 34063-84 on 1985-90, made of

durable steel.
VT No. Item
17-1175
17-9845 Shifter Cam Follower
17-1152
13-9161 Spring for Above
Cam Follower Kit includes steel
follower and two springs Fits 1985-
Shifter Forks steel type or brass forks available in standard or
90.
offset dimension. Both are one piece forged, heat treated and
VT No. 17-0850
machined to stock specification. Use on all 4 Speed 1952-90.
Sold each. Pawl Carrier Assembly is an exact replica of
Brass Steel Size forged aluminum as original and includes all internal
17-1175 17-1152 Standard parts assembled for XL 1952-90 4-Speed models.
Replaces 34016-77. Order bolt separately.
— 17-9793 +.005
VT No. Item
— 17-9792 -.005 17-0087 Assembly
17-1173 17-1153 +.010 17-9949 Pawl Carrier
17-1174 17-1154 -.010 17-1492 Pawl Carrier
17-1176 17-1155 +.020 17-0227 Bolt for 1954-E84
17-1177 17-1156 -.020 17-0231 Bolt for Late 1984-90
17-9794 17-9790 +.030 Sportster Shifter Pawl Assembly
17-9795 17-9791 -.030 includes shifter pawl carrier, Shifter pawls,
Shifter Finger Roller replaces 34168-52. Fits pawl springs, pawl spacer and retaining
1954-90, sold in pairs. rings. Fits 1972-90 all XL models.
VT No. 17-0118 VT No. 17-9801
Weld In Case Repair Section fits 1957-83
Shifter Fork Shaft.
cases.
VT No. OEM Years
17-1159 34141-52A 1952-84 VT No. 43-0116
17-1170 34141-84A 1985-01 Crank Case Vent Fitting replaces 34744-77. Fits
17-9847 1977-80.
Pawl Carrier Support Only. Fits VT No. 40-0513
1977-90, replaces 34514-75A.
VT No. 17-9847
Magnetic Drain Plugs prevent metal par-
ticles from circulating through engine and
transmission cases, oil tank, etc.
VT No. OEM Size Use

37-0096 707 ¹⁄₂ — 13 XL Transmission
37-0098 720, 706A ⁵⁄₈ — 18 Oil Tank and Time Hole
37-8961 718 ¹⁄₄ — 18 NPT Chain Cover
Access Doors
17-1187 17-9919 17-9148 17-9148
37-8935
Front Back 17-0956
VT No. 17-9148 is 7775-T6 alumi-
num and tempered 83, 000 lb tensile
strength
Machine Center
XLH-XLCH Transmission Products are guaranteed for quality and fit.
VT No. Years Item Type
17-1161 1957-83 Door Replica
17-1187 1957-83 Door with bearing Replica
17-9148 1984-90 Door with alternator Sifton
17-0956 1994-03 Door Stock
37-8935 1991-03 Insert Stock
12-1154 1957-90 Dowel Pin Standard
12-1155 1957-90 Dowel .010 Oversize
17-1181
17-9148 Door Production
870
Cover 1971-76 Cover 1986-up
43-0109 43-0173 43-0125

Sprocket Cover. Features starter motor cut out, fits both kick 43-0166 43-0167 43-0129
and electric start or electric start only models. Stock replace-
ment type, not reinforced. Fits 1971-76 XLCH-XLH.
Polished Chrome Type
43-0108 43-0109 Kick and Electric 43-0130
— 43-0173 Electric Only
— 43-0125 Electric Only 43-0130 Installed
43-0145 43-0180
43-0080 43-0149
Reinforced Sprocket Cover features extra thick, heavy duty in

cast aluminum. Fits 1971-76 XLH-XLCH.
Polished Chrome Type 43-0150 43-0185 43-0186
43-0117 43-0145 Kick Only Sprocket Covers are die-cast as original. Order hardware sep-
43-0118 43-0180 Kick Starter and Electric arately. Fits XLS-XLH.
Kick Starter Return Spring Stud fits 1971-78. Polished Chrome Black OEM Year
VT No. Finish 43-0166 43-0167 — 34911-81B 1986-90
17-0156 Chrome 43-0129 43-0130 — 34911-81A 1981-85
XL
9900-1 Chrome — 3058-10 — Mt Kit 1983-85
9901-1 Cadmium — 43-0080 — Belt 1986-90
43-0149 43-0150 43-0330 34911-91 1991-03
43-0185 43-0186 43-0329 34932-04 2004-up
43-0111 43-0112
Sprocket Cover 1977-80
43-0172 43-0177 43-0178 43-0120
43-0138 43-0144
1977-78 Sprocket Covers for XLCH kick only, and XLH kick
and electric. Has foot peg stud hole. Replaces OEM 34850-77
kick, 34870-75A kick and electric.
Polished Chrome Type
43-0111 43-0138 Kick
43-0112 43-0144 Kick and Electric
— 43-0172 Electric Only
43-0119 43-0152
1979-80 Sprocket Covers.
Chrome Polished OEM Year
43-0177 — 34870-79 1979
Allen Style Stock 43-0178* — 34872-79 1979
Screw 43-0152 43-0120 34911-80A 1980
Mount Kits *Note: For kick and electric start.
Chrome Chrome Cad Years Type
— — 8889-2 1971-76 Stock
8784-4 8784-4T — 1971-76 Allen 1979 Kick Starter Return Chrome Spring
8786-5 8786-5T — 1977-80 Allen Stud. VT No. 9902-1
871
1981-up Sprocket Cover and Hardware
27-0832 27-0833
42-0840 42-0843
43-0388 43-0389
Outlaw Front Pulley Cover Guard and Pulley Cover. Outlaw
Front Pulley Cover replaces stock pulley cover for a high per-
formance look. Outlaw Pulley Cover adds the finishing touch by
42-0845 42-0930 filling in the center of pulley for a clean detailed look. Available
in either black or chrome finish. Fits 2004-up XL.
Chrome Black
43-0388 43-0389 Pulley Cover Kit
27-0832 27-0833 Pulley Cover Guard Kit
23-3024
23-1728
23-3015
42-0383 42-0384
Sprocket Cover Trim fits over existing cover for XL’s as noted. 23-3080
Includes hardware. 23-3079
Chrome Black Fits
42-0840 1986-90 Sprocket Cover Hardware. Fits XLS-XLH.
42-0843 1981-85 VT No. OEM Years Item
42-0845 42-0383 1991-2003 23-3024 34866-86A 1986-90 Mount Stud
42-0930 42-0384 2004-up 23-3015 42441-80 1980-90 Pivot Stud
Sprocket Cover Screw Sets. 23-3079 42441-90 1991-2003 Pivot Shaft
Acorn Allen Years 23-1728 34909-83 1983-90 Master Cylinder
— 8786-5 1981-85 Support Bracket
8866-8 9750-6 1986-2003 23-3080 34933-96 1991-2003 Master Cylinder Support
Acorn Allen — 9750-6T 1986-2003 Bracket
— 2226-4 2004-up *Note: Fits belt and chain drive.
Kick Starter Gear Kit

17-1105 17-1146
XLCH Internal Kick Starter Gear Kit has parts pictured,

matched ratchet gear set with sleeve, crank gear, spring, rivets,
locks, shaft and the hard to find hardware for XLCH repair or
XLH conversion. Only needed parts are a cover, kick starter
XLCH Ratchet Gear Kit includes gear, plate, rivets, machined spring and arm assembly. 1980-up Sportsters are not drilled to
spacer and spring for appropriate year. Spacer supplied as accept a kicker shaft.
noted. VT No. Fits
VT No. Year Spacer 17-1144 1954-70
17-1103 1954-70 17-1100 17-1145 1971-72
17-1104 1971-72 17-1100 17-1146* 1973-79
17-1105 1973-79 17-1102 *Note: Must be used with early style one piece kicker arm
872 VT No. 17-0308.
1952-79 XLH Kick
Starter Conversion
22-0988
XLH Complete Kick Starter Kits. All parts included as illustrat-

ed. Check ratchet gear spacing before assembly. Available in
kick only sprocket cover or kick and electric sprocket cover with
VT No. Years Type Finish
cut away for starter motor. Available with chrome or polished
22-0211 1973-76 Kick only Chrome
sprocket cover.
22-0205 1977-78 Kick and Electric Polish
V-Twin Original Since 1980!
22-0210 1977-78 As Above with Cover Chrome
22-0206 1977-78 Kick only Polish VT No. Years Type Finish
22-0207 1979-only Kick and Electric Polish 22-0988 1952-67 Kick Only
22-0783 1980-84 Kit Polish 22-0200 1967-70 Kick and Electric Polish
22-1050 1952-70 Kick only Polish 22-0201 1971-72 Kick and Electric Polish
22-0202 1971-72 Kick only Polish
22-0203 1973-76 Kick and Electric Polish
22-0209 1973-76 As Above with Cover Chrome
22-0204 1973-76 Kick only Polish
XLCH Ratchet Gear Kit. Includes
16-0165 gear, plate, rivets, machined spac-
12-0528 er and spring for appropriate year.
Spacer supplied as noted.
VT No. Year Spacer
17-1103 1954-70 17-1100
17-1104 1971-72 17-1100
17-1105 1971-79 17-1102
XL
Kicker Starter Hardware for 1954-79 Sportster.
VT No. # OEM Years Item
12-0709 5 6802 All .007 Shim
12-0528 8 7926 All Shaft Nut
17-1111 9 8215 1957-70 Rivet, 25 pack 16-0466
17-1112 10 8216 1971-up Rivet, 25 pack
17-9844 12 24577-68 1968-up Hole Plug Ratchet Plate Riveting Fixture and Alignment Tool clamps
17-0018 13 33052-71 All Kick Arm plate to drum while setting rivets on 1971-79 XL clutch drum.
14-0115 14 33076-37 All Oil Seal
13-0122 15 33084-41 All Chrome Spring VT No Item
17-0155 16 33088-52 1952-70 Spring Stud Zinc 16-0165 Tool
17-0156 18 33088-71 1971-79 Spring Stud Chrome 16-0466 Drill Fixture Only
17-1114 19 33094-57 1957-76 Kicker Shaft
17-1115 33094-77A 1977-79 Kicker Shaft
10-0718 20 33099-52A All Bushing Shaft
10-0719 20 As Above with seal
17-1113 21 33110-54 All Thrust Plate
17-0301 22 33175-16B All Kick Pedal
28-0213 23 33182-63A All Black Rubber
10-2494 24 33213-31 All Pedal Bushing
13-9184 25 33215-30 All Spring Washer 17-1116 17-1109 17-1108
17-1106 26 33348-57 1957-77 Large Kick Gear
17-1107 33348-77 1978-79 Large Kick Gear Starter Ratchet Plates available with 9 teeth. Both mesh with
17-9833 27 33356-52 All Gear Stop Pin stock gear.
17-0984 27 33356-52 1952-84 Gear Stop Pin VT No. OEM Year 17-1191
37-9239 28 6469 All Washer for Above
17-0911 29 33362-52 All Lock Tab 17-1116* 33379-57 1957-70
17-1116 30 33379-57 1957-70 Ratchet Plate 9T 17-1109 33379-71A 1971-79
17-1109 31 33379-71A 1971-79 Ratchet Plate 9T 17-1108* 33379-71A 1971-79
13-0127 32 33390-52 All Ratchet Spring
17-1103 33 Cpt. Kit 1954-70 Ratchet Gear Kit
17-1191 33379-57 18 Tooth
17-1104 33 Cpt. Kit 1971-72 Ratchet Gear Kit *Note: Machined type
17-1105 33 Cpt. Kit 1973-79 Ratchet Gear Kit Ratchet Plate Rivets. Two lengths ⁵⁄₃₂ x 1³⁄₁₆ x
17-0998 34 33432-73 1973-79 Ratchet Gear 9T ⁹⁄₃₂ dia (8215) use on 1957-70 XLCH and ⁵⁄₃₂ x
10-0722 35 33442-57 57-E73 Bushing
10-0723 36 33442-73 L73-79 Bushing ⁷⁄₁₆ x ⁹⁄₃₂ dia (8216) use on 1971-79 XLCH. 25
17-1101 38 37753-76 1957-70 Spacer XLH, electric pk.
start only VT No. OEM Type
17-1100* 39 37754-74 1957-72 Spacer 1.047 long
17-1102* 40 37755-73 1971-79 Spacer 1.153 17-1111 8215 Early
*Note: For kick and electric start. 17-1112 8216 Late
873
Kick Pedal and Arm 17-9921
Stroker Kick Starter Arm Kit
includes I Beam, 1” longer chrome
kicker arm with chrome rail type buf-
17-0308 17-0322 falo kick pedal and hardware.
VT No. Item
17-9921 Complete kit
17-0309 17-0160 Arm only
17-9150 Pedal only
Chrome Fold-Out Kick

17-0307 Starter Arms for 1977-79.
17-0018 17-0344 The 17-9934 features flat
17-0310 kicker pedal that spins.
Kick Starter Arms are constructed of forged steel for durability VT No. Type
17-9934
for 1954-84 FX-FL. 17-0307 Stock
VT No. OEM Finish Type 17-9934 Flat Pedal Style
17-0309 Kit Chrome Complete 17-9981 As above w/o
Includes heavy forged offset kick arm VT No. 17-0308, kick pedal
pedal 17-0301 and necessary hardware for easy installation. H-D Logo Kick Starter
17-0308 33052-71 Chrome Heavy Pedal VT No. 17-0315
17-0310 As above Stainless Heavy
17-0018 As Above Chrome Standard
17-0284 Polished Stainless Steel
17-0322 33052-71 Black Polished
17-0344 Natural Replica Black
17-0301 17-0311 17-2123
17-0602 Bolts Chrome Kit 17-0302 17-0303 17-0306
Kick Starter Pedal Assembly for 1936-76.

17-0386
VT No. Fits
17-0765 17-0359 17-0301 Flat Rubber Complete
Alloy Billet Kick Starter Pedals. 17-0311 Flat Rubber White
17-2123 Shaft Only
VT No. Style
17-0302 Chrome Skeleton (USA)
17-0386 Knuckle 17-0303 Brass Skeleton
17-0765 Maltese 17-0306 Bolt Kit
17-1491 Knuckle Only Alloy 37-0992 Chrome Bolt (5 pack)
17-0359 Polished Alloy Assembly 17-0771 Bolt, Each
17-0355 Bronze Assembly 17-0355 37-0964 Bolt, Each, Chrome
Red Baron Billet Kick Starter Kick Starter Rubber is a stock
Pedal includes chrome axle replacement of rubber, for old
shaft. style popsicle kick starter pedal.
VT No. 17-0651 28-0213 28-0214 Black White
28-0213 28-0214
A B
17-0299 17-9150 Kick Starter Spring Studs.

Flat Kick Starter Pedals available in O-Ring or Rail design. Zinc Chrome Cadmium # OEM Year
VT No. Type 17-0155 9898-1 — A 33088-52 1952-70
17-0299 O-Ring — 17-0156 — 33088-71 1971-78
17-9150 Rail — 9900-1 9901-1 As Above 1971-78
17-0046 — 9902-1 — B 33098-79 1979
Kick Starter Return Spring for
17-0461 17-0459 all 1954-79. Replaces 33084-41.
Spool Kick Starter Pedal. Order bolt kit separately except where Chrome Black
noted. 13-0122 13-9248
Black Chrome Brass Type 13-0122 13-9248
17-0979 — — Spool w/bolt kit
17-0046 17-2124 — Spool
17-0459 17-0461 17-0474 Holes
— 17-0343 Swiss Cheese
— — 17-0837 Ventilated includes bolt kit
17-0957* — — Hex, *Note: Parkerized finish
874
22-0213
5 Speed Kicker Kit
Installed
22-0218
22-0213
22-0213
Installed
22-0459 22-0589
22-0213
Installed
22-0458
XL
22-0591
Now Available for 2004-up
17-0723
models! Kit includes new
mainshaft with integral
gears!
Kicker Kits fit 1991-up XL 5-Speed models. Sprocket cover
22-0458 features logo.
Alloy Chrome Black Years
Installed 22-0213 22-0218 22-0655 1991-03
22-0219 22-0220 1991-03 (no logo)
22-0562 22-0563 22-0591 2004-05
22-0458 22-0459 22-0589 2007-up
17-0467
17-0468
43-0967
Components for 1991-up.

17-0466 1991-06 Mainshaft
17-0723 2006-up Mainshaft w/gears
17-0467 2004-06 Cover
17-0468 2004-up Bracket
43-0967 2007-up Alloy Sprocket Cover
22-0458 43-0969 2007-up Chrome Sprocket Cover
875
1991-up Clutch Component
18-0178 Assembly
Complete
Clutch Pack
includes all parts
shown except
clutch ramp. 13-9257 36715-94 L Clutch Adjuster Spring, 1994-up
VT No. Year 18-8327 36785-91 M Clutch Hub, replica
18-0177 1991-93 18-8326 36790-91 N Clutch Shell with P & V, 1991-03
18-3171 As Above Assembled w/M & U
18-0178 1994-03
18-0792 36790-04 N Clutch Shell with P & V, 2004-up
Clutch Hardware for 1991-up Sportster. 18-3170 As Above Assembled w/M & U
VT No. OEM # Item 36792-91 O Diaphragm Spring
37-9161 3583 A Bolt 12-9998 36799-91 P Ball Bearing
12-0158 8873 B Ball, 25 pack 17-0932 36802-84B Q Filler Plug Lock Plate
12-0353 8885 C Bearing 12-9915 37495-91 R Main Shaft Nut
12-0961 11046 D Adj. Screw Ret. Ring 18-8298 37870-91 S Spring Washer
12-0567 11730A E Nut Adj. Screw 18-8256 37872-90 T Inner Spring Seat
12-0986 11250 EE Ret. Ring, 1994-up 18-8258 37904-90 U Retaining Ring
18-3206 11735B F Adjust Screw, 1991-93 18-8259 37905-90 V Retaining Ring
18-3242 11752 F Adjust Screw, 1994-03 18-8260 37908-90 W Retaining Ring
18-3210 25453-87A G Ramp, Inner 1994-up 18-8261 37909-90 X Retaining Ring
18-0351 Kit Ramp Assembly, 1991-93 18-3230 37910-91 Y Clutch Plates (8) Set
18-0352 Kit Ramp Assembly, 1994-up 18-8255 37912-91 Z Pressure Plate
18-1111 25409-86A H Outer Ramp, 1991-93 18-3169 Z As Above Assembled
18-3243 25409-94B H Outer Ramp, 1994-up w/F, C, D, BB and W
18-3211 34920-86 I Cable Coupling 18-3231 37913-90 AA Steel Plate (6)
17-0931 25448-84 J Lock Tab, 1991-93 18-8297 37918-91 BB Release Plate
18-3647 — K Ring Gear 18-8313 37977-90 CC Spring Plate
13-9158 36715-84 L Clutch Adjuster Spring, 1991-93
1985-90
Clutch 18-0179
Hardware
Clutch Hardware for Sportster 1985-90. VT No. OEM # Item
VT No. OEM # Item 18-8268 36786-84 MM Pressure Plate
37-9161 3583 AAA Bolt 18-1146 36787-84 N Steel Drive Plate, 5 Piece Set
18-8269 5707 AA Spacer 18-3665 36788-84 O Friction Plate, 7 Piece Set
12-0158 8873 A Ball, 50 pack 18-3216 36789-84 P Spring Plate, Center
12-0353 8885 B Bearing 18-8324 36791-84 Q Clutch Drum Assembly
12-0960 11045 C Retaining Ring, Guide 18-3646 — Q1 Ring Gear Only
12-0961 11046 D Adjusting Screw Retaining Ring 18-8233 36792-84 R Spring Pressure Plate
12-0962 11164 E Clutch Hub Retaining, 10 pack 18-8227 R As Above Barnett Brand
12-0567 11730A F Nut, Adjuster Screw 18-8219 36794-84
S, U, Z Clutch Internal Spring Seat Kit
18-3206 11735B G Adjust Screw Includes S, U, Z
18-0351 25408-84 GG Ramp Kit 12-0964 36795-84 T Ret. Ring, Clutch Hub
17-0931 25448-84 I Lock Plate, Ramp 18-3660 36797-84 V Retaining Ring Press. Plate, 10
18-3211 34920-86 J Cable Coupling 12-0963 36798-84 W Retaining Ring Clutch Hub
13-9158 36715-84 K Clutch Adjuster Spring 12-0352 36799-84 X Bearing Clutch
18-3659 36730-84 L Bearing Guide 17-0932 36802-84B Y Filler Plug Lock Plate
18-8244 36785-84 M Clutch Hub 18-8266 36793-84 Z Spring Seat Center
18-0179 — A-Z Complete Kit
18-0352 18-0351 18-3619 18-1211 Clutch Ramp Assemblies
Full Kits include all neces-
sary hardware for installation.
VT No. Year
18-0352 1994-up
18-0351 1986-93
18-3619 1971-84
18-1211 1954-70
876
1971-84 Clutch Hardware
Complete Clutch Pack includes all

parts shown, except clutch release kit
#15.
VT No. Year/Type
18-0551 1971-80 Kick and Electric
18-0552 1971-80 Kick
18-0553 1981-Early 84 Electric
18-0833
18-3163
18-3166
XL Clutch Hardware
18-1219 21 1981-E84 Kick & Electric
VT No. OEM # Item
18-3168 21 As Above Assembled w/22,10,11
18-1212 5995 1 Spacer Standard 1.525 (6)
18-0833 Ring Gear (Special)
XL
18-1214 5996 1 -.040 (6) under
12-0329 33722-71 22 Bearing
18-1215 5997 1 -.080 (6) under
18-3208 37878-74 23 Release Disc
18-3655 6860 2 Washer, each
18-2330 37879-71 24 Thrust Collar
37-0516 7130W 3 Lock Washer
18-3651 37985-71 25 Drive Plate, 8 pack
12-0511 7686 4 Nylon Lock Nut, 10 pack
18-1119 37987-71 26 Outer Drive, each
12-0513 7803 5 Adjuster Nut
18-1118 37992-71 27 Steel Drive, 8 pack
17-1112 8216 6 Rivet, 25 pack
18-2322 38005-74 28 Stud Plate
12-0157 8860 7 Balls
13-0141 38079-72 29 Outer Spring
12-0341 9073 8 Bearing
Set 38080-71 30 Inner Spring
12-0903 11005 9 Snap Ring, 10 pack
18-3618 31830-71 31 Screw Kit (Includes 3 and 5)
12-0909 11052 10 Snap Ring, 10 pack
18-1213 38130-71 31 Screw only
18-3260 11053 11 Retainer, 10 pack
18-3640 33167-67 12 1967-80 Ring Gear 18-8155 18-3618
18-3645 — 12 1981-Early 84 Ring Gear
17-1109 33379-71A 13 Ratchet Plate
18-3650 34920-71 14 End Coupling
18-3619 15 Kit, assembly
12-0540 37527-67 17 Hub Nut, each
17-0912 37533-52A 18 Lockwasher, 10 pack
12-1967 Kit 17-18 Nut Kit
18-2321 37499-71 16 Retainer, Releasing Disc Nut, 18-3619
Set of 6 retainers with nuts 1971-Early 84 XL Clutch Adjuster Parts Kit includes parts
18-1142 37561-71 19 Clutch Hub illustrated. Other items available separately. Screw kit includes
18-3162 37701-71A 21 71-80 Clutch Drum adjuster screw and nut only.
18-0000 Kick Only with Ratchet Plate VT No. OEM Item
18-3165 21 As Above Assembled w/22,10,11 18-8155 Kit Complete Kit
18-3163 37716-71A 21 71-80 Clutch Drum Kick and 18-3619 37203-71A Ramp Kit
18-0001 Electric with Ratchet Plate 37202-71A 34920-71
18-3166 21 As Above Assembled w/22,10,11 18-2332 37202-71A Inner Ramp
18-1131 37716-81 21 Clutch Drum 1981-E84 18-3618 31130-71 Adjuster Screw Kit
with Ring Gear 18-3650 34920-71 End Coupling
18-3167 21 As Above Assembled w/22,10,11 12-0903 11005 Snap Ring, 10 pack
12-0157 8860 Balls, 50 pack
877
1970 & Earlier XL Clutch
1970 and Earlier Clutch.
VT No. # OEM Item
17-1111 4 8215 ⁵⁄₃₂ x ¹³⁄₁₆ x ⁹⁄₃₂ Rivet
18-3640 5 33162-67 Starter Ring Gear
17-1116 6 33379-57 Starter Ratchet 9T
18-2331 7 34897-53 Screw Retainer
18-1140 8 37201-54 Release Worm and Lever
18-1138 9 37210-47 Release Worm Cover
13-0137 10 37222-52 Worm Lever Spring
17-1158 12 37279-56 Release Rod Set 56-66 XL’s 1967-69 XLCH
17-1157 12 37280-67 Release Rod Set 1967-69 XLH, 1970 XLCH
14-0125 15 37339-53 Release Rod Oil Seal
16 37345-52 Release Rod Oil Seal Ret.
12-0539 17 37526-56A Clutch Hub Nut
12-0540 18 37527-67A Clutch Hub Nut
17-0912 19 37533-52A Clutch Hub Lockwasher
17-0090 20 37535-52 Clutch Hub Spacer 18-3161
18-3161 21 37557-67 Hub Assembly, 1967-70 XLH, 1970 XLCH
18-3164* Nuts for Above *Note: Required
12-0372 22 37568-67 Clutch Hub Bearing Inner Race
12-0510 23 37581-52 Large Hub Stud Nut
12-0574 24 37582-52 Small Hub Stud Nut
12-0551 24A Nut Set 3 each, #23 & #24
18-8232 25 37584-64 Clutch Hub Stud (6) 1964-66
18-3123 25 37584-67 Clutch Hub Stud (6) 1967-70
17-0091 28 37721-54 Sprocket Hub Washer
12-0328 29 37722-52 Clutch Sprocket Needle Bearing
17-0020 30 37731-52 Washer, Sprocket Bearing, 0.0955” thick
17-0021 30 37732-52 Washer, Sprocket Bearing, 0.0975” thick 17-1158 17-1157
17-0023 30 Washer Sprocket Bearing, 0.1010” thick
17-0092 30 As Above Assortment, 1 each of above
14-0128 31 37740-57 Clutch Hub Oil Seal, Kick Start
14-0129 32 37741-67 Clutch Hub Oil Seal, Electric Start Assembly Order Illustration
18-3637 33 37760-52 Clutch Cover
15-0212 34 37762-52 Clutch Cover Gasket
18-3635 35 37876-52 Releasing Disc Clutch Rod Installation for
18-1113 36 37985-52A Friction Plate Raybestos (7) 17-1157 17-1166 and 17-1165.
18-1115 37 37992-52 Drive Plate (7)
18-1141 38 38013-52 Pressure Plate VT No. Year Models
18-1116 39 38016-52 Backing Plate 17-1158 1956-66 XLH
13-0140 40 38076-52 Spring (6)
18-3642 41 38101-52 Backing Plate, Spring Cup (6) 1967-69 XLCH
18-1139 42 38130-54 Adjusting Screw 17-1157 1967-69 XLH
12-0519 43 38135-50 Adjusting Screw, Locknut
1970 XLCH
18-1211 1954-70 Clutch
43-0133 Release Kits.
VT No. 18-1211
1954-70 Clutch Release Parts.

43-0114 VT No. OEM Part
18-1211 Kit
18-1138 37210-47 Cover
18-1139 38130-54 Screw
12-0519 38135-50 Nut
18-1140 37201-54 Worm
13-0137 37222-52 Spring (10)
1952-67 XLCH Cast Sprocket Cover fea-
43-0135
tures early Rib design, includes worm and
hardware, replaces 34874-52A.
VT No. 43-0133
43-0136
Early XLH & XLCH Sprocket Cover.

Kick and electric with starter cut out.
Replaces 34871-67B, kick only replac- 1952-70 Clutch Cable with adjuster.
es 34872-57A on 1952-70 Sportsters. VT No. Item
Complete cover assembly includes cover, 36-0406 Cable Assembly
release worm adjuster screw, nut, oil 37-8460 Adjuster Only, Zinc
deflector, spring and kicker spring stud. 2576-1 Adjuster Only, Cadmium
VT No. Type Rubber Cable Oiler Boot
43-0114 Polished Kick & Electric Cover replaces 38690-55, for XL
43-0135 Polished Kick Cover Only Stock Sprocket Kick Starter Cover Screws 1955-80. 5 pack.
43-0136 Chrome Kick Cover Only VT No. Years Type/Finish VT No. 28-0401
43-0115 Chrome Kick and Electric Cover 8884-2 1954-70 Chrome Replica Clutch Adjuster
18-1211 Release Kit 8885-2 1954-70 Cadmium Sleeve. Fits 1954-71, ⁷⁄₁₆”
8886-2 Stud, Chrome 8886-2 1952-70 Pipe Mount Stud hole levers. Zinc plated.
878 VT No. 37-8460
Clutch Set
18-8272
Clutch Kit. Heavy duty factory “wet” type for XL’s complete
kit includes our original bonded clutch steel plates and spring
plate. 18-8276
VT No. Year Spring
18-1734 1984-90 Without
18-1735 1984-90 Without 18-8274
18-3686 1991-up With
Clutch and Spring
Kit includes 8 friction
plates, 8 steel plates, Alto Clutch Sets. Sold Kevlar or Red Eagle type. Both are
spacer set and spring bonded to steel.
set. Fits 1971-E84. VT No. Year Type
VT No. 18-1150 18-8271 1957-70 Red Eagle
18-8272 1971-83 Red Eagle
18-8273 1971-83 Kevlar
18-8274 1971-83 Red Eagle Outer Drive Plate, each
18-8275 1984-90 Red Eagle
18-1120 18-3651 18-8300 1984-90 Kevlar
18-8276 1991-up Red Eagle
18-8299 1991-up Kevlar
18-xxxx 2018-up
18-8284
XL
Replica Clutch Sets.
VT No. Year Type Set
18-1113 1952-70 Raybestos Friction 7 piece
18-1120 1971-84 Alloy Friction 8 piece Steel Sets.
18-0155 1971-84 Veloprene Friction 8 piece VT No. Year Qty VT No. Year Qty
18-3651 1971-84 Steel Friction 8 piece 18-8283 1957-70 7 piece 18-8285 1984-90 5 piece
18-3263 1991-up Steel Drive 6 piece 18-8284 1971-83 8 piece 18-8286 1991-up 6 piece
18-0154 1991-up Veloprene Friction 8 piece
Tamer Thrust Collar fits 1971-84. Clutch Spacer for 1971-83. Set of
Eliminates jerking and lunging while in gear. 6 spacers to provide adjustment of
Works on belt and chain drive, replaces pressure plate and adequate clear-
bearing thrust collar. ance on inside diameter of friction
VT No. 18-2323 plates.
VT No. Colony Size Type
18-1217* 1.525” Barnett
18-1212 2756-12 1.530” Stock
13-9204 18-1214 2765-12 .040” Under
13-0141
Clutch Spring for 1971-84, two piece type replaces 38079-72 18-1215 2775-12 .080” Under
and 38080-71 or as one piece heavy duty type. *Note: Use with Barnett Clutch Plates SK3K (VT No. 18-1117).
VT No. Item Type 12-1967 12-9915 Clutch Hub Nuts secure clutch hub
13-0141 2 piece Stock to main shaft.
13-9204 1 piece Heavy VT No. Fits Item
12-0539 1956-69 Nut
Clutch Adjusting Screws sold each.
2738-4 1956-69 Kit
VT No. Years Model
12-0540 1967-84 Nut
18-1139 1952-70 XL and K
12-1967 1967-84 Kit
18-1213 1971-84 XL
12-9915 1991-up Nut
18-3206 1985-94 XL
18-3242 1995-03 XL York Patch.
18-3262 2004-up XL VT No.48-1781 12-0539 12-0540
879
Primary Chain
Primary Chain features end-
less construction, oval shape
side plates. Fits 1957-2003
Diamond Endless Primary Chains XL (35 x 3 x 94) for 34T
with oval side plates. sprocket.
19-0362 VT No. Year Sprocket Link
19-0362 1957-2003 34 94
19-0369 2004-up 38 96 VT No. Item
Barnett Clutch Kit 19-0932

19-0373
94 Link Chain
96 Link Chain 19-0271
19-0271 Master Link
18-3230
18-3691
Barnett Series K Kevlar Clutch Plates

and Steel Plates for Sportster. The Carbon Fiber Clutch Sets for wet clutch by Barnett. Carbon
ultimate in durability, smoothness and fiber clutches feature excellent lubricity and very good energy
18-1119 strength. Steel backed plates give smooth absorption. Order steel plates separately.
precise launches and shifting even VT No. Year
under extreme heat. 100% asbestos 18-3688 1971-84
free. Barnett friction clutch sets and steel 18-3689 1984-90
plates, sold in sets only. 18-3690 1991-up
VT No. Year Type U/M 18-3691* 1991-up
18-1115 1952-70 Steel 7 *Note: Consists of nine friction plates and eight steel drive
.047 Thick wit key hole slots plates. Add 12% more surface area. Double steel drive plate is
18-1116 1952-70 Steel 1 not used.
Backing Plate
18-1117 1971-84 Friction 8
Wet Only Supplied with Spacers
18-1118 1971-84 Steel 8
Inner/outer slots keep plate flat and true
18-1119 1971-84 Alloy
Bonded one side outer drive plate
18-3665 1984-90 Friction 7 1971-84 Barnett
Kevlar bonded 18-3742 Friction Plate Set.
18-8248 1984-90 Friction 7 Original compound.
9 Friction 8 Steel Plates, adds 14% surface area. VT No. 18-3122
18-1146 1984-90 Steel 5 Barnett Scorpion Clutch Kit features over twice as much fric-
18-3230 1991-up Friction 8 tion surface area compared to stock clutch. Scorpion Clutches
Kevlar bonded provide a positive engagement and release. The kit incorpo-
18-3231 1991-up Steel 6 rates six heavy duty coil springs. In addition, an extra spring set
Re-use stock double riveted drive plate with a different spring rate is included which allows the clutch
18-3233 1991-up Extra Plate Consists of 9 to be tuned for street or race application depending on usage.
Kevlar Friction, 8 Steel Plates. Adds 12% more Tunability is easy without removal of the primary cover. Barnett
surface area, double riveted drive plate not used. friction plates are compatible with any primary oil. Each kit is
13-0141 13-9204 designed to be used with stock type clutch basket.
VT No. Fits
18-3722 1971-83
18-3732 1984-90
18-3742 1991-up
Clutch Springs. Stock type are sold as
sets. 13-0140 Tamer Clutch Pull Kit will soften the “pull” required on 1999-
Fits 1971-84 up Sportster models. The tamer replaces the stock Harley
VT No. Brand Quantity clutch on all of the 1999 to present Sportsters. The pivot is
13-0141 V-Twin 2 moved closer to the center so the clutch lever is easier to pull
13-9204 Heavy Duty 1 for those who have difficulty holding their clutch while driving.
13-2007 Sifton 1 13-9254 A finger lock is in place to help better hold the clutch spring in
Fits 1952-70 place during the installation process. *Note: For use with the
13-0140 V-Twin 6 clutch outer ramp and the clutch ramp assembly. Fits 1999-up.
13-9254 Barnett 6 VT No. 18-0634
880
Diamond Rear Chain
530 Standard Diamond is the main- 19-0725
stay of the motorcycle chain.
VT No. Links VT No. Links

19-0320 100 19-0327 108
19-0321 102 19-0324 110
19-0322 104 19-0325 112
19-0323 106 19-0326 120
530 XDL Self Lube eliminates the possi-
bility of hit and miss lubrication, as it has a
constant and consistent lubrication in the
pin bushing (wear) area.
VT No. Link VT No. Link
19-0330 100 19-0334 108
19-0331 102 19-0335 110
19-0726
19-0332 104 19-0336 112
19-0333 106 19-0337 120
530 XLO Diamond O-Ring Chain
includes a .214 pin which has been pro-
duced using a special alloy steel and case
hardened for optimum strength.
VT No. Links 19-0349 108
19-0354 102 19-0357 110
19-0355 104 19-0358 112
19-0348 106 19-0398 120
530 Diamond Nickel Plated Chain
offers rust-proof protection along with
a nickel finish. Each part of the nick-
el plated chain is individually plated
before assembly Size 50ENP.
XL
VT No. Links 19-0457
19-0340 100
19-0341 102
19-0342 104 19-0458 19-0823
19-0347 120
Master Links. Replacement link for #50 530 chain. Note: sold in
10 packs unless noted otherwise.
VT No. Fits Chain Type
19-0350 Standard
19-0351 Nickel
19-0375 XDL Self Lube 19-0824
19-0353 XLO O-Ring, each
19-0376 N.O.S. Repair Link with 2 Masterlinks OEM, 40052-15
19-0436
19-0432
19-0824
Rear Chain Tensioner by LBV reduces chain vibration and
frequency of adjustment by utilizing a durable urethane roller
which revolves on sealed bearings mounted on chrome anchor
plates.
VT No. Year Model
V-Twin Chain is 120 links by 530.
19-0432 1957-up XL-XLH
VT No. Finish Type
19-0436 Roller only For Above
19-0725 Nickel STD
Tsubaki Standard S 530 Sigma O-Ring Chain
19-0726 Parkerized STD
with 10,600 lbs. 150 tensile strength, features
19-0457 Natural Heavy Duty
heavy-duty, wide-waist link plates for increased
19-0458 Natural O-Ring
durability.
19-0823 Silver O-Ring
VT No. 19-0555
19-0824 Nickel O-Ring
881
Rear 1979-81. Rear
Sprockets.
Chrome
Lazer Style
Sprocket
Replaces 41470- Sprockets
73. Used on 1979- feature milled
81 XL, XLCH & center design
19-0672 XLS, cast or wire and 9.8 mm
wheel. Dish type offset fit 1979-
sprocket with 81. Flat fits
9.8mm offset. 1986-up.
Zinc Chrome Teeth
Offset Flat Teeth
— 19-0047 43
19-0129 19-0132 48
— 19-0049 44
19-0130 19-0133 49
— 19-0032 45
19-0131 19-0134 51
19-0048 19-0033 46
Note:
19-0673 — 19-0035 47 Sprocket off-
— 19-0037 48 set measured
— 19-0039 49 from bolt
19-0040 19-0041 51 mount sur-
face to center
1982-92. Chrome finish. Offset types have of teeth.
6 mm offset.
VT No. OEM Teeth Type
19-0042 41470-82 48 Offset
19-0043 41464-81 51 Offset
Chrome 5-Spoke Sprockets. Offset 19-0120 41470-78 48 Flat
Rear Sprocket Kits for brake drums with
models have 9.8 mm offset. Note: Offset 19-0124 — 49 Flat
rivet on sprockets. Includes rivets and
is measured from sprocket bolt mount 19-0121 41464-86 51 Flat
dowels. Fits 1952-78. 51 tooth. Replaces
surface to center line of teeth as shown. Note: VT No. 19-0120, 19-0124, 19-0121
41470-70.
Offset Flat Teeth Fits are flat. 19-0042, 19-0043 have 6.0mm off-
VT No. Item
19-0672 19-0674 48 1986-99 set. 19-0032 through 19-0048 have 9.8mm
19-0011 Kit
19-0673 19-0675 51 1986-99 offset.
19-0114 Rivets
19-0218 19-0251 48 2000-up
19-0250 19-0221 51 2000-up
Transmission Drive Sprocket
19-0422 19-0128 Type A 19-0125 Transmission Sprockets. 19-0589 has offset for 200 tire.
1952-78 1979-83 1984-90 1991-up #
Type A Type A Type B Type C of Teeth
19-0125 — — — 18
19-0090 — — — 19
19-0091 — 19-0072 19-0383 20
19-0092 19-0096 19-0063 19-0384 21
Type B
Offset Sprockets fit models which allow 19-0093 19-0097 19-0064 19-0385 22
use of a 150 series tire, order rear sprocket 19-0589 — — — 22
spacer separately. 19-0094 19-0098 19-0073 19-0386 23
VT No. Teeth Speed Year 19-0095 19-0099 — — 24
19-0419* 19 4 1984-90
19-0409 21 4 1984-90 19-0064
19-0410 22 4 1984-90 Type C
19-0421 19 5 1991-up
19-0422* 20 5 1991-up
19-0128 Spacer 3/16” 19-0211 19-0215
*Note: Includes ³⁄₁₆” spacer with sprocket.
Drive Sprocket Nut Kit Offset Transmission Drive Sprockets fit
includes lock tab. VT No. 1991-up XL’s with chain drive conversion.
12-0529 includes seal 19-0384 .500” Offset Counter Shaft Sprocket
in nut. Oil Seal & Retainer VT No. Teeth
Kit. Metal retainer 19-0164 22
with seal. Replaces 19-0402 23
VT No. OEM Years 35150-52, includes 19-0122 24
12-0529* 35047-53 E1953-70 gasket and screws. .810” Offset Counter Shaft Sprocket
12-0530 35047-71A 1971-E84 Fits all 1952-E84. 19-0214 22
12-0566* 7855W 1984-90 VT No. OEM Item 19-0215 23
20-0308 35211-91 1991-up 17-1160 Complete Kit 19-0216 24
17-0910 Lock Tab 1952-E84 15-0190 35169-52 Gasket
*Note: Does not include lock tab. 14-0118 35151-52 Seal
882
Motor Sprocket
19-0067 Note: 2004-up models
requires purchase of
sprocket/alternator rotor
assembly
*Note: Rotor Assembly
19-0437
XLCH Motor Sprocket.
VT No. OEM Years Teeth
19-0009 Special 1957-76 23
Compensator Sprocket Components. Fits 1957-76 XL. 19-0067 40235-70A 1970-76 XLCH 34
VT No. # OEM Item Year 1976-78 XLH
19-0437 A-F — Complete Kit 1967-74 19-0381 40235-74 1977-78 XLCH 34 12-0502
19-0438 A 40273-67 34T Sprocket 1967-76 1979-90 All XL
19-0439 B 40297-57 Cam Extension 1957-76 32-0030* 32493-02A 2004-up 34
13-9238 C 40302-55A Spring 1957-76 19-0451 40241-02 2004-up 34
19-0440 D 40325-57 Sleeve 1957-76 Nuts
19-0441 E 40376-57 Shaft Extension L1957-E74 12-0502 8025 1957-69 Nut
19-0443 E 40377-74 Shaft Extension 1974-76 12-0505 40387-70 1970-88 Nut
19-0442 F 40386-57 Nut 1957-76 12-0149 7652 1989-up Nut
10-0460 40240-89 1989-up Spacer
Primary Chain Adjuster

18-3156
18-3155
18-3220
Chain Tensioner includes pad and clip
XL
replaces 39975-54A on 1957-69 XLCH
models or 39975-54B on 1971-76 XLH-
XLCH includes 39980-54 brace. 18-0250
VT No. OEM Item
18-3155 39975-54A (A)
18-3156 39975-54B (B-C) 2 piece
18-3228 39980-54 (C) Offset Bracket 18-0119
28-0224 18-3643
Primary Adjuster Shoe Kit for 1977-up.
Primary Chain Nylon Adjuster Pads for 1957-76. 18-3220 Kit 1977-85 All Shown
VT No. OEM # Years Model 18-3249 Kit 1986-90 As Above
28-0224* Kit 1957-76 XLH-XLCH 18-3221 A 3250 1977-90 Adjuster
18-0250 C&A 39975-90A 1991-01 Pad & Adjuster
28-0227 39978-58A 1957-76 XLH-XLCH
18-0119 40039-02B 2002-up Pad & Adjuster
18-3643 39979-58 Retainer For Above 28-0226 B 39966-80 1980-90 Pad
*Note: Includes metal retainer 18-3643. 18-3222 D 39973-86 1977-90 Carrier
12-1186 E 40018-77 1977-85 Stud
18-3684 18-3684 12-2121 E 40018-86 1986-90 Stud
13-9163 F 40019-80A 1977-85 Spring
13-9164 F 40019-86A 1986-90 Spring
37-0588 G 6033 1977-85 Copper Washer
18-3684 Installed York Self Adjusting Chain

18-3706
Tensioner fits 5 speed models
with wet clutch. Replaces factory
type detent adjuster shoe assem-
bly. Tensioner kit includes all hard-
ware and instructions for complete
conversion.
VT No. Fits
18-3684 1991-03
18-3706 2004-up
883
Rear Pulley Chrome Pulley/Sprocket Bolt Kit
A B C
20-0376 20-0377 20-0379 E F
20-0765 20-0378 20-0766 H I

G
Rear Drive Pulley. Pulley Width are 31mm for 1.125" and
25mm for 1" pulleys.
VT No. Teeth Finish
1991-99
20-0376 61 Chrome
2000-03 Year Wheel Type Drive Type # Style Nuts/Washer
20-0377 61 Chrome Cast Spoke Belt Chain
20-0765 61 Natural 1979-91 9857-10 • • A Collar
1979-91 9856-15 • A Collar • •
20-0768* 61 Natural 1979-91 8836-10 • A Acorn
2004-06 1979-91 8834-10 • C Allen •
20-0767 61 Natural 1979-91 37-8131 • D Hex •
20-0378 68 Natural 1979-90 8835-10 • • G Allen •
2007-up 1979-90 9608-10 9609-15 • • H Dome • •
2000-up 2053-10 2053-10 • I Hex •
20-0766 68 Chrome
*Note: Smooth Type
Front Pulleys
20-0526 20-0341 20-0381

42-0670 42-0934 42-7512
Final Drive Front Pulleys for 1986-up 5 Speed models as
Rear Pulley Cover. supplied by V-Twin or BDL. All BDL pulleys are ¹₃” lighter than
VT No. Year Teeth Finish stock and include spacer, seal, lock plate and screws.
42-0670 1991-03 61 Chrome Teeth 1986-90 1991-03 1991-03 2004-up
42-0934 2004-up 68 Chrome V-Twin V-Twin BDL V-Twin
42-7512 2004-up 68 Chrome 27 20-0328³ 20-0381² — —
42-1132 2004-up 68 Black 42-1132
28 — — 20-0650 20-0382²
Rear Belt Note: There is no warranty on belts sold

29
30
—
—
20-0526¹ 20-0651¹
— 20-0652
20-0341¹
20-0383
Notes: 1 Stock Replacement for 1200 models
as part of kit or individual replacements.
2 Stock Replacement for 883 models
Pulley Lock
3 Replacement for OEM Belt Drive Conversion Kit
20-0060 Tool fits 1991- 19-0834 Billet Primary Chain Adjuster Kit
up XL. 20-0348 Front Drive Pulley Nut Only
VT No. 16-0588 20-0368 Front Pulley Nut Only
20-0436 Final Drive Front Pulley 29 Tooth
20-0437 Final Drive Front Pulley 32 Tooth
Final Drive Belts for XL’s by Carlisle, BDL and Gates.
Carlisle Dayco BDL Width Tooth/Model 20-0512 20-0648 29 Tooth Front Drive
20-3999 — 20-0456 1.125” 125T XL Ratio Change Pulley features offset.
20-4000 — 20-0060 1.125” 128T 1991-92 XL 883 1991-03
Deluxe XL 1200, 1993-03 All XL and 1986-92 XL Rear VT No. Offset
Belt Conversion Kit 20-0512 .750”
20-4001 — — 1.125” 133T 1993-2003 20-0648 1.00”
XL Ratio Change
— — 20-4004 1.125” 136T 2004-06 883 XL 20-0308 Front Belt Lock Plate and Nut Kit
— 20-0688 — 1.125” 137T 2004-06 1200 XL includes 2 allen screws, sprocket
Pulley Indexing Flange Nut allows drilling and lock nut and lock plate. Fits 1991-up
tapping of additional set screw locations. Fits XL models.
1991-up XL. VT No. Item
VT No. Type 20-0308 Kit
20-0215 Belt 17-0934 Lock Only
20-0324 Chain 12-0579 Nut Only
Note: For descriptive purposes 37-0429 Set Screw
XL= For Sportster
884
Sprocket
Offset Transmission Drive Rear Chain Conversion Sprocket
Sprockets fit 1991-up XL’s with
chain drive conversion.
Order flange nut separately.
.500” Offset Counter Shaft
Sprocket 19-0761
VT No. Teeth
19-0211 19-0215 19-0164 22
19-0402 23
19-0122 24
20-0324 Nut
Sprocket Kit for converting 1991-2017 XL models to chain

drive. Includes 120 link chain, front and rear sprockets.
VT No. Year Front Tooth Rear Tooth
19-0456 1991-99 22 48
19-0672 19-0673 19-0761 2000-06 23 51
Chrome 5-Spoke Sprockets. Offset models have 9.8 mm 19-0763 2000-17 23 48
offset. Note: Offset is measured from sprocket bolt mount
surface to center line of teeth as shown.
Offset Teeth Fits 19-0250 51 2000-up
19-0672 48 1986-99 23-0320 Shim 1986-99
19-0673 51 1986-99 20-0346 Shim 2000-up
19-0218 48 2000-up
Rear Belt Guard

27-0619 27-0541
10-0489
XL
Cam and Sprocket Cover fits 2004-up.
VT No. Finish
10-0478 Chrome
27-0848 10-0489 Black
27-1667 27-0123
27-0542
Chrome Guard/Rear Pulley/Dress Up Kit includes belt guards,

upper and lower, and rear pulley cover for 5-Speed belt drive
27-1745
models with hardware. 27-0862
VT No. Year Pulley
27-0541 1991-99 61 Tooth
27-0542 2000-03 61 Tooth
27-0619 2004-up 68 Tooth
27-0848 2004-up 68 Tooth 27-1443
27-1645 Belt Guards.
27-0788 VT No. Year Finish
27-1667 1991-99 Chrome
27-0123 2000-03 Chrome
27-1745 2004-up Chrome
27-0862 2004-up Chrome
27-1445 27-1443 2004-up Black
Chrome Belt Guard is for cus-
Lower Belt Guard. tom mounting on rigid Sportster
VT No. Year Finish models.
27-1645 1991-03 Chrome VT No. 27-0173
27-0788 2004-13 Chrome 27-0788
20-0784 2004-up Chrome Installed
27-1445 2004-up Black 885
Shifter Lever
21-0572
21-0571
21-0574
21-0573
21-0578 H
21-0575 21-0576 Chrome Shifter Levers. Note: 21-2013 & 21-0301 have
smooth bore.(A) type requires use of long stud shifter footpeg
as hole is not threaded.
VT No. # Year
21-0577
21-0359 A 1954-73 (Zinc) 21-0304 D 1977-85
21-2013 A 1952-70 21-2012 E 1986-90
21-0579 21-0310 A 1952-70 21-0643 E 1986-90
21-0301 B 1971-74 21-2032 F 1991-03
21-0314 B 1971-74 21-0578 H 2004-up
21-2034 C 1975-76
Chrome Shifter Lever Assemblies include cats paw shifter
peg. 21-0571 has smooth bore. 21-0584 21-0823
VT No. Year VT No. Year
21-0571 1957-70 21-0575 1977-85
21-0572 1957-70 21-0576 1986-90
21-0573 1971-74 Heel to Toe
21-0577 1991-2003
21-0574 1975-76 21-0584 2004-up
21-0579 2004-up
Shifter Lever fits 21-0823 1991-03
21-0550 21-0387 1991-up 5-Speed.
VT No. Year
21-0550 1991-2003
21-0612 21-0614
21-0387 2004-up
21-0590 1991-2003 Chrome Billet Shifter Lever and Footpeg Kit includes arm
21-0590 Black with highlighted and cats paw shifter footpeg.
aluminum VT No. Year
21-0612 1991-03
21-0614 2004-up
Shifter Pegs
Chrome Diamond Shape Shifter Peg 27-1633 21-2025 21-1665 21-0407
includes diamond shape rubber insert
and short stud (1/2”).
VT No. 21-0260
21-0901 21-0902 21-0903
21-0407 21-0401
21-0402
21-0908
21-0640
Shifter Footpegs are the short stud type.
21-0904 VT No. Type
Stock Rubber Shifter Pegs are in long or short stud. The 27-1633 Railer
⁷⁄₈” long stud is used when the lever is unthreaded and stud 21-2025 Cats Paw
accepts a nut. Short ⁵⁄₈” thread screws into lever. 21-1665 Cats Paw, extended
VT No. Color Type 21-0407 Chrome Cap
21-0901 Black Short ¹⁄₂” 21-0640 O-Ring (Rotates)
21-0902 White Short ⁵⁄₈” 21-0402 O-Ring
21-0903 Black Long ⁷⁄₈”
21-0908 Black Long ⁷⁄₈”
21-0904 White Long ⁷⁄₈”
886
22-0957 Mid Mid
2004-up
Control Set
22-0958
22-0456
22-0962
22-0962
22-0457
22-0962
Further Forward Mid Control Kits. Kits move shifter and
brake pedal 3" more forward from stock location and allow use
of custom footrests. Available in chrome or black finish. 22-0961
and 22-0962 include custom mini floorboards and 22-0961 and
22-0958 do no include foot pegs. Shifter peg not included.
Chrome Black Year Note
22-0957 22-0958 2014-up Without footpegs
22-0961 22-0962 2014-up With mini floorboards
22-0456* 22-0457 2014-up Forward Controls
*Note: without footpegs
22-0961
XL
22-0796 22-0797
Billet Forward Control.

Black Polish Fits
22-0796 22-0797 2004-13 XL
27-1731 22-0960
27-0999
27-0974
XL Forward Control Footpeg Conversion Kits
• 2004-up XL models with forward control no longer allow standard
rider footpeg; these kits let you mount standard footpegs on the late
model XL's with forward controls
Reduced Reach Forward Control Adapter Kit fits XL. Brings • Also works as replacement footpeg mounts on select OEM and
forward controls closer to rider. V-Twin forward control kits for 2004-up XL models
• Kits includes a left and right footpeg mount in either chrome or anod-
VT No. Finish Years
ized black finish complete with mounting hardware
27-1731 Chrome 2011-13 • Available in standard length or +2" extended length
27-1820 Black 2011-13 Note: If converting standard forward controls to extended, a longer
22-0960 Black 2014-up shifter linkage rod 10 1/4" long) is also required VT No. 27-0253 or
Extended Reach Forward Control use the 2" extension, VT No. 21-0270 along with the original linkage
rod.
Conversion for 2004-13 XL forward
VT No. Type
22-0971 controls, to move 6” forward. 27-0974 Chrome Standard Forward Control Conversion Kit
VT No. 22-0971 27-1014 Black Standard Forward Control Conversion Kit
27-0999 Chrome Extended Forward Control Conversion Kit
21-0452 27-0975 Black Extended Forward Control Conversion Kit
21-0453 2004-up Chrome Forward Control Footrest

Support fits XLC models with forward controls.
Shifter Linkage fits 2004-up XLC models with forward controls. VT No. Item
VT No. Style 27-0010 Support
21-2087 Maltese 21-2087
21-0746 Footpeg Yoke
21-0452 Black Hole
21-0453 Black Talon Note: For descriptive purposes
XL= For Sportster
887
2004-up Forward Control Set
22-0769
22-0731 Installed
Right
22-0731
22-0769
Installed
Shifter Side Left
Brake Side
22-0721 22-0731
Chrome Billet Forward Control Kit. Master cylinder includ-

ed. Order brake line and related parts separately.
VT No. Item Years
22-0769 Kit 1986-03
23-0688 Brake “T”
22-0900 22-0456 23-8060 21” Line
23-0612 10 mm Bolt
23-4047 Straight Banjo
23-4051 90° Banjo
22-0457
22-0457
2004-05 XL Stock Mid Control Kit is for use with stock foot-
rests. *Note: Order additional hardware and reuse original
components from the motorcycle.
VT No. 22-0461
22-0457
22-0799
Forward Control Set includes brake pedals and mount plates

as shown. 22-0731 includes soft peg set.
VT No. +2" Item Year
22-0828 With Footpegs & M.C. 2004-13
22-0721 Without Footpegs 2004-05
22-0731 With Footpegs 2004-05
22-0900 22-0799 Chrome w/Footpegs 2006-13
22-0456 22-0871 Chrome w/o Footpegs 2014-up
22-0457 22-0872 Black wFootpegs 2014-up
Hardware for Above
21-0787 Shaft Arm
888
Controls 1991-03
+2” Extended Chrome Forward
22-0784
Control Kit for XL mod-
els, featuring XLC styling.
Kit includes Cats PawTM
Foot and Shifter Pegs.
22-0718 & 22-0588 order
pegs separately.
22-0588
VT No. Item Years Speed
22-0719 Control Kit with pegs 1991-2003 5
22-0718 Control Kit without pegs 1991-2003 5
22-0588 Control Kit +2” without pegs 1986-2003 4/5
27-1582 Foot Peg Set All 1991-03
21-2025 Shift Peg All 1991-03
21-0830 Shifter Arm
Left
Right 22-0785
883-1000-1100-1200 Forward Control Kit for Sportster models Billet Forward Control.
with alternator. Includes chrome brake and shifter assemblies, Black Polish Fits
complete with all necessary brackets, pedals, linkage, O-Ring 22-0784 22-0785 1991-2003 XL
pegs and hardware for installation. Use existing master cylinder
for assembly.
VT No. Year Model
22-0396 1991-2003 5-Speed
22-0383 1991-2003 5-Speed without pegs
XL
1991-2003 Forward Control Kit 5 Speed
Brake Related Parts for
22-0790.
VT No. Item
23-4279 90 degree Fitting
23-8342 36” Hose
23-0571 “T”
23-0426 Switch
23-8362 16” Hose
23-4050 Banjo
23-3005 Master Cylinder
Right 23-0859 MC Rebuild
23-0773 Plunger
1986-2003
Chrome Mid-Control Kit for stock original style. Fits 1986-
2003.
VT No. 22-0460
Left
1986-03 Billet Forward Control Kit features Big Twin style

controls. Order related brake parts separately. Will not work
with stock exhaust.
VT No. 22-0790
889
Forward Control
for 1957-1990 4 Speed
Left
Right
883-1000-1100-1200 Forward Control Kit for Sportster models
with alternator. Includes chrome brake and shifter assemblies,
Left complete with all necessary brackets, pedals, linkage, O-Ring
VT No. 22-0700 pegs and hardware for installation. Use existing master cylinder
for assembly.
VT No. Year Model
22-1048 1986-90 4-Speed
VT No. 22-0701
Right
XLH-XLCH Forward Controls are chrome plated and com-
plete as pictured for right and left sides for 1957-78 models with
mechanical brakes. Purchase longer motor mount bolts sepa- 22-0766
rately. Note: Front Pipe may have to be indented for clearance. 22-0766 Left
Right Side
Side Shift
VT No. Fits Brake Shift Brake
22-0700 1957-74 Left Right Chrome Forward Control Kit for XL models, featuring XLC
22-0701 1977-78 Right Left styling. Kit includes Cats PawTM Foot and Shifter Pegs except
on 22-0588 order pegs separately.
VT No. Item Years Speed
22-0766 Control Kit with pegs 1986-90 4
22-0588 Control Kit +2” without pegs 1986-2003 4/5
Shift 21-2018 22-1046
Brake Side
Side
21-2052
Replacement Parts.
22-0391 VT No. Item
23-9202 Brake Pedal only
21-2058 Shift Foot Lever only
21-2018 Inner Shift Lever, 5 Speed
21-2052 Two Piece Shift Arm, 4 Speed
21-2058
21-0957 Shifter Arm Extension
21-0956 Shifter Pedal Mount
21-0402 Shifter Peg
27-1580 Footpegs
22-0451 Jockey Clutch Pedal Shaft, chrome
Front Motor Mount Bolt Kit. Stock length kits
Daniel Boone Forward Controls fit models as listed. 1977-78 include chrome spacers and washer. Extra length
models are cable operated and include cable. 22-0391 includes
kit are bolts only and do not include spacers. Use
master cylinder and stainless brake line.
extra length kit for installing forward controls or
VT No. Fits Brake Shift Brake Type
hiway bars. Fit 1957-84.
22-0391 1979-83 Right Left Hydraulic
21-0923 1957-74 Lever 7408-10T VT No. Type Style
7141-18 Stock Acorn
27-1520 21-0671 37-9207* Stock Hex
27-1519 9797-20 Stock Allen
7408-10 Extra long Acorn, 7.5”
7408-10T Extra long Acorn, 7.5”
37-9086 Chrome Spacer Set
Brake Pedal can be used as a replacement for Daniel Boone 37-9158 Washers, 4 pack Locating
or Davy Crockett controls. The ³⁄₈ - 16 threaded stud can also
*Note: Does not include spacers
be used as rigid mount foot pegs.
VT No. Item U/M Chrome Forward Control Kit
27-1519 Rubber Covered Set fits 1954-1974.
27-1520 O-Ring Set VT No. 22-0406
21-0671 Cats Paw Peg Each
890
1980-up Rear Brake Part
23-0680 Chrome Brake Pedal includes Chrome Pedal and Master Cylinder
23-0401 bushing. Cover Kit includes pedal, cover, plunger
VT No. Year and mount hardware. Fits 1982-2003.
23-0401 1980-2003 VT No. 23-0672
23-0680* 2004-up
*Note: Will not fit XLC models.
Brake Pedal Dress Kit includes

pedal and reservoir cover. Fits
2004-07 XL.
23-1741
VT No. 23-0962
23-3079
23-1728
23-3024
23-3015 23-3080
Rear Brake Pedal & Components fits 1980-2003.

Sprocket Cover Hardware. Fits XLS-XLH. VT No. # OEM Item
23-0401 A 42459-80B 1980-2003 Pedal
VT No. OEM Years Item 23-0405 A-1 542400-80 Pin for Pedal
23-3024 34866-86A 1986-90 Mount Stud 23-1741 B 42445-80A 1980-2003 Rod End and
23-3015 42441-80 1980-90 Pivot Stud C 42448-80 Plunger Assembly
23-1986 B&D — Rod End with Pin
23-3079 42441-90 1991-03 Pivot Shaft 23-3016 B 42445-80A 1980-E87 Rod End only
23-0809 42441-04 2004-up Pivot/Clevis, Zinc plated 23-9173 B 42437-87 1987-up Plunger Rod End
23-1728 34909-83 1983-90 M.C. Support Bracket 23-3017 E 42448-82A 1982-E87 Plunger
23-3015 F 42441-80 1980-90 Pivot Shaft
23-3080 34933-96 1991-03 M.C. Support Bracket 23-3079 FF 42441-90A 1991-03 Pivot Shaft with Clevis
23-2310 12-0972 G 11093 1980-89 Pivot Retainer
Rear Brake Lines for 13-9165 H 40920-79 1980-84 Return Spring
Sportster, master cylin- 13-9166 H 40920-82 1984-E87 Return Spring
der to TEE, rear hose 28-0505 I 40922-79 1979 Pushrod Boot
12-0971 J 40918-82 1984-up Retaining Ring
XL
is rubber with chrome 23-1758 K 44126-82 1982-up Washer, Spring
STEEL end from TEE 23-1728 L 34909-83 1983-90 Bracket
23-3080 L 34933-96 1991-03 Bracket, Chrome
23-8076 to rear caliper. 10-1256 M 42443-80 1980-up Bushing
VT No. OEM Item Years
23-0696 44437-77
23-0729 42484-81
Tube
Tube
1979
1981-85 Caliper Insert
23-2310 44438-87B Hose 1987-03
23-8076 Braided Hose 1987-03 (Stainless Steel)
*Note: Single piece hoses, use this line only.
23-9239
37-8968 37-8969 37-8970

Chrome Brake Caliper Inserts are easily installed with double
face tape supplied. Sold each.
VT No. Diameter Fits Type
Rear Caliper Parts for 1979-81.
VT No. # OEM Item 37-8968 1.80” 1987-99 Hayes Rear
23-9239 Assembly Caliper, Chrome 37-8969 1.47” 1984-99 Front
23-1746 F 44175-77 Screw Set 1982-E87 Girling Rear
44176-77 37-8970 1.40” 1977-83 Dual Disc Front
23-9199 H 44182-77 Plate, Inner 1972-84 Banana Rear
44185-77 Plate, Outer
23-2276 E 44152-77 Seal Kit 1977-81 Rear
44180-77 Rear Caliper
23-0510 A 43395-80 Pad Set Pistons. *Note:
23-0140
23-2280 G 44181-77A Caliper Piston Includes seal kit.
23-1731 D 44146-77 Bleeder VT No. Year Rear Caliper Seal Kits.
23-9198 C 44141-77 Brake Hose Seat 23-1999 23-2280 1979-81 VT No. Year
23-0135 J 45861-79 Bushing, Set 23-2281 1982-86 23-2276 1979-81
45862-79 23-1999* 1987-99 23-2277 1982-86
28-0718 K 44199-79 Rubber Bumper
Rear Caliper Bolt Set. 23-0125 23-0532 2000-03 23-9022 1987-99
VT No. Fits Finish 23-0275* 2004-13 23-0533 2000-03
37-0508 1982-E87 Chrome 23-0290 23-0290 2014-up 23-0276 2004-13
23-0140 L1987-99 Chrome 23-0293 2014-up
23-0125 L1987-99 Black
2081-3 2000-07 Chrome
891
Rear Caliper 23-1150
23-0587 23-0236
23-0633 23-1097
23-0855 23-9221 23-9052
23-0369
Caliper Assemblies.
VT No. OEM Year Finish 23-1092
23-0587 40925-00 2000-03 Chrome
23-0633 40968-04 2004 Chrome
23-0236 40968-05 2005-07 Chrome
23-0855 40968-08 2008-10 Chrome
23-1316 40968-11 2011-up Black
23-1331 40968-11 2011-up Chrome
23-9221 44198-87 L1987-99 Caliper Chrome
23-9052 44052-82A 1982-E87 Caliper, Complete Chrome
37-0508 44201-82 Bolt Kit for Above 22-0366
23-9047 Chrome Bracket for Calipers are sold Chrome Rear Caliper Kit fits XL models and includes com-
separately. Replaces 40929-87. Fits plete chrome replica 4-piston caliper assembly with pads and
L1987-99. polished stainless steel drilled brake disc with chrome mount
VT No. 23-9047 bolts.
VT No. Year
23-0137 23-0147 23-1150 2005-07
23-1097 2004
23-1092 2000-03
23-9238 22-0369 1987-99
Vibration Shims fit rear pads. 22-0366 1982-86
VT No. OEM Year
23-0680 21-0578
23-9238 41665-82 1982-86
23-0137 43959-86 1987-99
23-0147 44337-00 2000-03
23-9268 42521-04 2004-13 23-9268
11.5” Chrome Caliper Kit
fits XL’s Rigid frames with
3/4” rear axle. Kit includes
polished 11.5” disc, bolts, 2004-up XL Standard models.
chrome 4-piston caliper com- VT No. Item
plete with integral bracket 23-0680 Rear Pedal
and weld on frame tab for left 21-0578 Chrome Shifter Lever
side. VT No. 22-0370 27-0817 Footpeg Support Left Side
23-0780 Footpeg Support Right Side
23-9209 23-9209
22-0356
Caliper 22-0363
Installed
Rear GMA Billet Aluminum Brake Calipers are machined from billet
aluminum and clear anodized. Feature dual pistons which are internally
connected, brake pads and brackets, when provided. Include spacers
and hardware necessary for installation. Hoses and brake disc not
included. Use ⁵⁄₈” bore master cylinder. Rear Caliper Kits include GMA Caliper with bracket and either
VT No. GMA Model a polished or standard 11¹⁄₂” stainless steel rotor with mount
23-9209 205 Late1987-99 XL with banjo bolts bolts. Use with ⁵₈” master cylinder.
GMA Components.
23-4520 PA2 GMA Caliper Piston, pair, fits 23-4519, 23-9208, 23-9209
Polished Standard Fits
23-4510 RB1 Caliper O-Ring Seal Kit fits ,23-4519, 23-9208, 23-9209 22-0361 22-0354 1979-81
23-4514 B-Pad SBS Brake Pad Set fits Calipers: 23-4519, 23-9208, 23-9209 22-0362 22-0355 1982-Early87
23-9936 R79FXL GMA Floating Brake Disc 1979-99 Rear 22-0363 22-0356 Late1987-99
892
23-0408
1952-78 Rear Brake
A B 23-0438
23-0404
23-0400
Brake Pedals.
VT No. OEM Years Finish Rear Brake Drum includes sprocket riveted on for use on
23-0408 42410-52 1952-74 Chrome 1955-78 XLH-XLCH Sportster models. Order mounting bolts
23-0931 42410-52 1952-75 Zinc separately.
23-0400 42420-75 1975-76 Chrome VT No. # Type Finish
23-0404 42410-75A 1977-79 Chrome 45-0403 A Cover Chrome
A B Rear Brake Backing Plate 23-0437 B Drum Chrome
in chrome or polished finish. 23-0438 B Drum Black
Order anchor bolt kit sepa- 8812-16 Bolts Cadmium Set
rately. 8811-16 Bolts Chrome Set
19-0011 Sprocket 51T Black with rivets
C
19-0114 Rivets Set
23-0817 Shoe Kit 1952-72
23-0818 Shoe Kit 1973-78
Polished Chrome # Year Type Rear Brake Drum and Nut Kit
23-2267 23-9013 A 1954-72 Rod 2800-16 1952-65 K, KH, XL, 3/4" long chrome
23-9014 B 1973-74 Rod 2801-16 1952-65 K, KH, XL, 3/4" long cadmium
23-2268 23-9015 C 1975-78 Cable 3192-16 1952-65 K, KH, XL, 3/4" long parkerized
Brake Operating Shafts are splined to accept brake pedal. 8811-16 1966-78 XL, 1" long, chrome plated
VT No. OEM Year 8812-16 1966-78 XL, 1" long, cadmium plated
23-1997 42549-52 1952-74
23-0396 41620-75 1975-76
23-1997
23-1998 42549-75 1977-79
Brake Operating Shaft Bushings. 23-0396 23-0450
10-2505 47757-52 1952-76
10-8268 25594-75 1977-Early81 23-0505 23-0503
10-0748 34898-79 1979 only Pivot Shaft 23-1998
Brake Shoe Sets fit 1954-78 XL models. Include linings rivet-
XL
Chrome Rear Backing Plate ed on. Order spring set separately.
Assembly includes chrome backing VT No. Item Type
plate, shoes, springs, cam, pivot stud 23-0505 Lining Set Standard
and related hardware. Order rear 23-0450 Lining Set .025 Oversize
arm separately. 13-0146 Spring Set —
VT No. Year 23-0503 Shoe Set Standard
22-0728 1954-72 23-0390 Shoe Set .025 Oversize
Rear Wheel/Brake Drum Assembly
22-0729 1973-74 includes 16” all chrome wheel, brake
22-0728 22-0730 1975-78 drum, chrome backing plate assembly
Chrome Rear Brake Linkage and chrome axle kit. Order chrome
Kit includes chrome rod with nut, brake arm VT No. 23-0397.
chrome pedal, chrome rear arm,
brake spring, cross shaft, clevis
VT No. Fits
pin and hardware.
VT No. Years 52-1050 1954-72
22-0812 52-1051 1973-74
22-0812 1952-66
22-0811 1967-74 52-1052 1975-78
1952-72 Drum Front Brake

Front Brake Parts fit 1952-72.
VT No. # OEM Item
N/A A 44148-64 Polished Backing Plate
24-0116 B 44156-64 Pivot Stud, 1964-72
23-0525 24-0609 C 44307-52 Zinc Lever
36-2385 D 45060-54 Cable Assembly Clutch and Brake Lever Assemblies
36-2565 D Cable Assembly include cable pin. Available chrome or pol-
8818-3 E 45159-50 Adjuster, zinc ished with ⁵⁄₁₆” hole sizes for cable entry. VT
9741-2 E Chrome As Above No. 26-2167 and 26-2168 accept front brake
37-8676 F 45174-64 Zinc Clevis switch.
24-0095 G 45203-52 Chrome Front Brake Tube Chrome Polished OEM Fits
24-0646 As Above Cadmium 26-0525 26-0526 45002-65 1952-68 Brake
2041-7 H 45218-53 Parkerized Throttle Cable Bracket 26-2167 26-2168 45002-69 1969-72 Brake
13-0146 I 41835-69 Spring Set
23-0505 J 44432-54 1952-63 Linings
23-0450 J O.S. 1952-63 Linings
23-0506 J 41848-64 1964-72 Linings
23-0525 41849-64 Shoe Set
23-0519 K 44264-64 Brake Cam, 1954-72 893
Master 42-9945
23-1717
Cylinder
23-0757
23-1720
23-0758
23-1828
23-9262
42-9945 Installed
42-0890 23-9177 23-9201

23-0789
23-0586
Chrome Rear Master Cylinder Covers. Rear Master Cylinder Rebuilds.

Rear Master Cylinder. VT No. Years VT No. OEM Fits
VT No. OEM Finish Years 42-9945 1980-2003 23-1717 42374-77B 1980-81
23-0757 42453-82B Natural 1982-E87 42-0890 1982-2003 23-1720 42874-82A 1982-Early87
23-0758 42453-82B Chrome 1982-E87 23-9177 42382-87A Late1987-03
23-2313
23-9262 42456-87 Chrome L87-2003 Piston Assembly
23-0586 Pushrod L87-2003 23-1211 42810-04 2004-06
23-0800 42521-07 2007-up 23-1212 42810-07 2007-13
23-0789 42521-04 2004-06 23-1828 41700097 2014-up
23-0586 Pushrod Late 1987-2003
Warranty All Brake/Calipers/Master Cylinders sold as individual pieces or in kits are covered under our warranty “Replacement 42436-87
Only” Provision. All item part numbers begin with a 23 prefix. No credit will be issued for these items as they are exchange only.
24-0632 24-0629 23-9190

15-0188
15-0203
15-0250
23-0617 24-0601 15-0242
Big Twin Gaskets Master Cylinder and

Reservoir Top Gaskets
GB No. OEM Year Type
Rear Master Cylinder Boots 15-0188 45012-72 1972-81 Master
Rear Master Cylinder Top Covers available for the sold each. 15-0204 45012-82 1982-84 Master
years listed in Eagle Spirit chrome or with gold inlay VT No. OEM Fits 15-0242 45005-85 1985-95 Master
and in smooth style. 28-0503 41764-79 1979 15-0250 45005-96 1996-up Master
Eagle Spirit Eagle Spirit 28-0505 40922-79 1980-86 Rear
Smooth Chrome Gold Years 28-2005 40922-87 1987-up 15-0202 41766-58 1958-78 Master
23-9187 24-0629 24-0632 1987-96 15-0203 42455-80 1979-81 Master
23-9190 — — 1982-87 15-0248 42455-82 1982-E87 Reservoir
23-0617 — — 1979-81 15-0540 42455-99 2000-up Reservoir
Finned 15-0242 45005-85 1985-95 Master
24-0601 — — 1979-81 15-1379 Gasket 2004-06 Master
15-1380 Gasket 2007-up Master
Stainless Steel Master Cylinder Top Screws, 25 pack. 15-1617 Gasket 2014-up Master
VT No. OEM Years Type 15-1618 Gasket 2014-up Master
37-8947 2628 1972-81 Front Master Top, Countersunk
37-8821 42534-82 1982-up Reservoir Cover
894
1954-78 Mechanical Brake Part
Chrome Rear Brake

23-0127
Arm replaces 41925-52.
Fits 1952-78.
VT No. 23-0397
1954-78 XL Rear Brake Components, Drum Type. 23-0410 41A 41876-73 Pivot Stud 1973-78
VT No. # OEM Item /Type 23-0412 42 41882-52 Stud Nut 1954-72
10-2505 22 47757-52 Bushing, pair 9207-4 37-41-42 — Pivot Stud Kit, Chrome
44-0326 23 7986 Axle Nut Kit, Chrome 9208-4 As Above Pivot Stud Kit, Cadmium
36-1975 25 38634-75 Cable Assembly 1975-76 23-0397 45 41925-52 Rear Lever Chrome
36-1977 25 38634-77 Cable Assembly 1977-78 23-0322 Zinc Rear Lever
13-0205 27 40521-75 Spring, Stop Light & Switch 23-0399 46 42252-52 Brake Rod, 54-66 Short, Chrome.
23-0438 28 41401-52 Drum and Sprocket, Black 23-0324 42252-52 As above, Cad w/nut
23-0437 28 Complete As above, Chrome 23-0326 42252-52 As above, Parkerized
19-0011 29 41470-70 Sprocket only, Black with rivets 23-0398 46 42253-67 Brake Rod, Long 67-74, Chrome
8811-16 6-19 Chrome Lug Bolt Set 23-0325 42253-67 As above, Cad w/nut
8812-16 6-19 Cadmium 3970B and 7725 Nut 37-8461 47 42264-52 Adjuster Nut 1952-78
44-0217 30 41551-52 Rear Axle, Chrome 23-0421 48 42269-30 Clevis Pin 1954-74
44-0565 30A — Rear Axle Kit 23-0408 51 42410-52 Pedal, Chrome 1952-74
44-0317 31 41598-52 Collar, Zinc 23-0400 52 42420-75 Pedal, Chrome 1975-76
44-0500 31 41598-52 Collar, Chrome 23-0404 52 42410-75A Pedal, Chrome 1977-79
44-0324 32 41600-55 Spacer, Chrome 13-0153 54 42427-52 Return Spring 1954-78
23-0396 33 41620-75 Splined Arm 1975-76 23-1997 55 42549-52 Cross Shaft 1954-74
23-2267 34 41662-54 Side Plate 1954-72 23-1998 55A 42549-75 Operating Shaft 1977-79
23-2268 34 41662-75 Side Plate 1975-78 23-3066 56 44264-54 Cam Brake 1954-78
13-0144 35 41667-75 Spring, Lever, each 23-0505 40 44432-54 Lining and Rivet Set 1954-78
XL
13-0146 39 41835-69 Shoe Springs, pr 37-9172 58 45052-75 Cable pin
23-0411 37 41730-52 Locating Block, Zinc 23-0503 60 44401-49B Brake Shoe Set
8937-3 38 41730-73 Spacer Pivot Stud Kit
43 41882-73 Bolt, 3 Piece 36-1975
44 41883-73 Washer, Cadmium
8936-3 — As Above, Chrome 3 Piece Kit 36-1977
23-0127 37-41-52 — Pivot Stud Kit 3 piece 1952-72
A 32-7785 B
C
Rear Brake Cable Assembly fits drum brake 1975-78 mod-
els, 2 types.
32-0547 32-0424 VT No. OEM Year
Chrome Brake Light Switches 36-1975 38634-75 1975-76
VT No. # OEM Type Fits 36-1977 38634-77 1977-78
32-7785 A 72004-52 Push 1959-66 Rear Chain Adjuster Sets are heat treat-
32-0547 B 72004-75 Pull 1975-76 ed and include nuts. Fits 1952-78.
32-0552 B Black Pull As Above D VT No. Finish
32-0424 C 72004-70 Push 1967-74 7703-2 Chrome
32-0572 D Kit Pull 1975-76 9020-2 Cadmium
32-0551 E Kit Push 1977-78 Anchor Studs for backing plates in
13-0218 Spring 1969 E chrome or cadmium finish.
VT No. Years Finish
Brake Rod Adjuster Nut. 9207-4 1954-72 Chrome
9207-4 8936-3 9208-4 1954-72 Cadmium
Fits 1952-78. VT No. 37-8461 8937-3
9208-4
8936-3 1973-78 Chrome
Universal Black 23-0410 8937-3 1973-78 Cadmium
32-0421 32-1155
Mechanical Brake Lamp 23-0410 1973-78 Zinc
Switch includes clamp and
spring. Pull is on.
VT No. Type 1958-69 XLCH Switch Kit replaces 72011-
32-1156 32-0421 Pull 59 bracket, 5902 (2) spacer and push type
32-1155 Pull brake switch.
32-1156 Pull VT No. 32-9161
32-9161
895
Front Caliper 84-99 1984-99 Type
Chrome Front Disc
Caliper available as
right or left assemblies
11¹⁄₂” Chrome Left Side Front
or set for 111/2” brake
Caliper Kit includes polished stain-
rotors. Includes all
less steel Dura brake disc with bolts
internal components
and chrome caliper half with brake
and pads. Fits 1984-
pads and hardware. 39mm. Fits
99.
1984-99. 23-3082
VT No. 23-0563
23-2226
Chrome Caliper Kit
features 4 piston chrome VT No. Item
caliper and polished 23-2226 Pair, Right and Left
stainless steel Dura brake 23-3085 Right only
disc. Fits 1984-99. 23-3082 Left only
VT No. 23-0649 1984-99 Black Front Caliper include inter-
nal components. Replaces 046-84C, left.
VT No. 23-3061
23-0279 37-0800 Chrome Front Caliper
Installed Bolt Kits.
VT No. Years
37-0800 1993-99
23-3061 37-8822 1984-92
Edart Billet Front Caliper includes bracket

23-0865
for 1984-99 ST and XL models is one piece
design.
VT No. Piston
23-1105 2
Front Chrome Billet Calipers feature 4-piston design with 23-0865 4
mount brackets included. Fits 1984-99.
VT No. 23-0279
23-0555 4
Installed Piston
Chrome Left Side 4 Piston Caliper features 2000-up styling

to retro fit 1984-99 models.
VT No. 23-0555 1984-99 Front Calipers and Components.
VT No. # OEM Item
23-4508 37-8822 A 855 Screw
23-4513 Kit B 3517 Screw
1983-92 C 6019 Washer
37-0800 As Above 1993-99
23-2279 D 44020-83 Piston Rebuild Kit
12-0977 E 44021-83 Retainer
23-2275 F and H 44047-83 Dust Boot with Seal
23-3061 G 44046-84C 1984-99 All, Black
Front GMA Billet Aluminum Brake Calipers are machined from billet alumi- 23-3082 G As Above Caliper Left, Chrome Complete
num and clear anodized. Feature dual pistons which are internally connected, 23-1731 J 44048-83 Bleeder
brake pads and brackets, when provided. Include spacers and hardware nec- 23-2274 K 44053-83 1984-92
essary for installation. Hoses and rotors not included. 23-9226 K 44053-92 Guide Pin Kit for 1993-99
VT No. GMA# Fits Bore 28-2133 L 44054-83 Boot, each
23-4508 400 77-83 XL Dual Kit, 8 Piston. ³₄” 14-0563 M 44059-83 O-Ring
23-4513 200E 74-77 XL Single Disc ⁵₈” 23-2308 N 44072-92A Bracket, Left
Components N 44073-92A Bracket, Right
23-4521 PA4 Caliper Piston Pair fits 23-4508, 23-9210, 23-1793, 23-2306 O 44061-83 Spring Clip
23-9256 23-2307 P 44062-83 Retaining Pad
23-4520 PA2 Caliper Piston Pair fits 23-4513, 23-4504 23-0512 Q 44063-83 Pad Set with B
23-4510 RB1 O-Ring Seal Kit fits 23-4513, 23-4504
23-4522 RB4 O-Ring Seal Kit fits 23-4508, 23-9210,
23-1793, 23-9256
23-4514 B Pad SBS Brake Pad Set Fits 23-9513, 23-4504
23-9169 F Pad SBS Brake Pad Set Fits 23-4508, 23-9210
23-0593 F-Pad Dura 4 pc Set
23-0182 11.5” Brake Disc
896
23-0238 23-0240
Front Caliper Kit
23-0562
23-0649
23-0279 23-0884
1984-99 Chrome Billet Front Caliper Kit includes billet 23-0989

chrome front caliper and bracket with pads and polished 18
spoke stainless steel brake rotor with bolts. Kit includes hard- 11.5” Chrome Front Caliper and Rotor Kit includes a com-
ware to fit 39 & 41mm forks FXST, FXD and FLST models. plete chrome replica 4-piston caliper assembly with pads, pol-
VT No. Item ished stainless steel drilled rotor and chrome mount bolts.
23-0238 18 Spoke Kit VT No. Year
23-0240 Razor Kit 23-0649 1984-99
23-0279 Caliper & Bracket Only 23-0562 2000-03
23-0884 Caliper Rebuild fits V-Twin Billet 4 Piston Calipers 23-0989 2004-up
1974-77 Single Disc Caliper

Chrome Caliper Kit Drilled includes
zinc or polished stainless steel brake
rotor. Fits 1974-77.
VT No. Rotor Type
23-0564 Steel Chrome
23-0564
23-0565 Steel Polished
XL
23-0303 23-0302 23-1206 Steel Black Caliper
23-0636 Single Disc Front Caliper
1974-77 “Clover Leaf” 111/2” Rotors. Assembly features stock type
VT No. Finish Brand construction in black or chrome
23-0303 Zinc Dura with piston installed. Caliper
23-0302 Zinc, Drilled Dura units include zinc plated brack-
23-0317 Stainless Dura ets and hardware. Fits 11¹⁄₂”
23-9042 SS Polished Russell 23-1730 rotor on stock 35mm forks. Fits
23-0636 SS Polished Dura 23-1737
1974-77.
1974-77 Front
VT No. Finish
Caliper Service Fix
23-1730 Black
Kit includes seal
23-0626 23-1737 Chrome
kit, spring, pins and
bleeder screw.
VT No. 23-0148
1974-77 Single Caliper Pieces.
VT No. # OEM Item
23-1723 K 44275-74 Piston 1974-77 Single Disc Caliper Kit includes GMA Billet Caliper,
12-0943 L 44274-74 Piston, Friction Ring 11.5” drilled zinc plated steel rotor and mount bolts.
23-0514 A&B 44281-74 Pad Set VT No. Item
23-0606 E&F 44277-74 Caliper Seal Kit 23-0626 Kit
44278-74 23-4513 Caliper Bracket Only GMA
23-0148 Kit Service Kit includes C,D,E,F,G,N
23-1747 C&D 44280-74 Caliper Pin Set, two piece
44283-74 Set
43302-77 Spring, Service Fix
23-1995 H 44272-74 Anchor Arm
I 44276-74 Plate, Floating Lining 23-2219 23-2237
23-0065 Anchor Arm Only Front Caliper Assemblies are fully assembled with disc pads
37-8996 M Kit Mount Bolt Kit Chrome and all internals for 1973 only XL front. Calipers accept 1/8”
23-1730 J Complete Black Caliper Assembly with A-F+H,I NPT line.
23-0711 N 41749-58 Bleeder Screw Black Chrome
8759-5 O 41191-74 Chrome Rotor Screw Set 23-2219 23-2237
897
00-03 Front Caliper 23-0554 23-0554
Caliper Seal Kits contain seal & dust

boot for year listed.
VT No. OEM Front
23-2275 44047-83 1984-99 XL
44022-83 Front Caliper are 4 piston type including all internal components.
23-0533 44315-00 2000-03 All 23-0554 features smooth face. Fits 2000-03.
Front Only VT No. OEM Side Finish
23-0554 44046-00 Left Chrome
23-0529 44046-00 Left Black
Left Chrome Front Caliper Cover 23-0580 44025-00 Right Chrome
includes chrome trim disc to conceal 23-0581 Set Right and Left Chrome
mount hardware. Fits 2000-2003.
Front Chrome Disc Brake Caliper Mount Bolt
VT No. 42-0844 Kit fits 2000-up models.
V-Twin Colony Year
37-0816 2080-4 2000-07
2754-12 2008-up
Pistons Only, less seals, pistons are sold each.
VT No. OEM Front
23-2279 44020-83 1983-99 XL
23-0532 44313-00 2000-03 All Front Only
2004-up Front Caliper

2004-up XL Front Calipers feature 4 pistons design in chrome. 23-0008
VT No. OEM Finish Side Model 23-0852
23-0851 44121-04 Silver Left XLH installed
23-0852 44121-04 Chrome 2004-06 Left XLH
23-0008 44546-04 Chrome 2004-06 Right XLH
23-0286 44121-07A Chrome 2007-up Left XLH
23-0821 42879-07 Chrome 2007-09 Left “48” 23-0008
23-0273 42822-04 Piston with seal 2004-06
23-0274 43529-04 Seal Kit 2004-06
23-0285 42028-07 Piston & Seal Kit 2007-13
23-0292 Seal Kit 2007-13
23-0827 41300006 Piston & Seat Kit 2014-up
23-0294 Front Seal Kit 2014-up 23-0821
1977-83 Dual Disc

1977-83 Chrome Dual Disc Caliper 23-2220
A 23-1119
and Rotor Set includes (2) chrome
calipers and (2) 10” drilled rotors.
23-0550 B
Dual Disc Front Disc Calipers includes body, piston, seals.
23-0259 Dual type fits 1977-83 FX-FXWG with 10’ brake rotors. Order
VT No. Item Rotor mounting hardware separately.
23-0250 Caliper Rotor Set Zinc Steel VT No. Side Finish Style
23-0258 Caliper Rotor Set Polished Stainless Steel 23-2221 Right Black A
23-1121 Right Chrome A
23-0259 Caliper Rotor Set Stainless Steel
23-2238 Left Black A
8758-10 Bolt Set 23-1119 Right and Left Black A
23-1122 Right and Left Black, ET B
Chrome Lower Slider Set Only fits 1977-82 dual 23-2220 Right and Left Chrome, Daytona B
disc 35mm forks. 23-0550 Right and Left Chrome, ET A
VT No. 24-0541
Dual Disc Caliper Hardware fits 1977-83. 23-0523
VT No. # OEM Item
23-0509 A 44098-77 Pad Set (4)
23-9198 B 44141-77 Seat, brake hose
23-1731 C 44146-77 Bleeder Fitting
23-0607 D 44151-77 Seal, piston
44153-77
23-2278 E 44157-77 Piston
23-0523 F 44158-77 Plate, Outer
44161-77 Plate, Inner 23-2278 24-0602
23-1734 G 44162-77 Pin
24-0602 H 44173-77 Screw 24-0603
44174-77
37-8970 I — Chrome Insert, each
24-0603 J 46018-77 Mount Bushing Set
46019-77
898
23-0341 23-0333 23-9044 23-0318 23-0362
23-0361 23-0468 23-0469 23-0357 23-0343
23-9206 23-0467 23-0319 23-0356 23-9040
23-9048 23-9000 23-9001 23-9002 23-9003
XL
23-6764 23-6765
Drilled Stainless Rotors feature rustless finish for appearance and long service life, in Russell or Dura Rotor brand. Available in standard or polished
finish. Russell and Dura Stainless Steel Rotors are compatible with all disc pads including sintered metal and OEM.
Dura Rotor Russell OEM Dia. Bolt Kit Bolt Kit Fits
Polished Standard Polished Standard Colony V-Twin
REAR
23-0341 23-0333 23-9044 23-0318 41791-79 11.5” 8791-10 Cast 8791-10T 1979-92 Cast or Wire
or Wire
23-0362 23-0361 23-9045 23-9926 41789-92 11.5” 9807-10 Cast 9807-10 T 1993-99 Cast or Wire
or Wire
23-0468 23-0469 — — 41789-92 11.5” 9807-10 Cast 9807-10 T 1993-99 Cast or Wire
or Wire
23-0357 23-0387 23-9050 23-9051 41797-00 11.5” 9807-10 Wire 9807-10T 2000-10 Cast or Wire
23-9000 23-9001 41833-08 10.5” 9807-10 Wire 9807-10T 2011-up Cast or Wire
9818-5 Cast
FRONT
23-0343 23-0334 23-9040 23-0319 44136-84 11.5” 8793-5 Cast 8793-5T 1984-91 Cast or Wire
8794-10 Wire 8794-10 T
23-9206 23-0368 23-9040 23-0319 44136-92 11.5” 8793-5 Cast 8793-5T 1992-99
8794-10 Wire 8794-10T Cast or Wire Wheel
23-0467 — — — 44136-92 11.5” 8793-5 Cast 8793-5T 1992-99
8794-10 Wire 8794-10T Cast or Wire Wheel
23-0356 23-0379 23-9048 23-9049 44156-00 11.5” 8793-5 Cast 8793-5T 2000-13
8794-10 Wire 8794-10T Cast or Wire Wheel Left Side Rotor
23-9002 23-9003 — — 41500022 11.8” 8793-5 Cast 8793-5T Cast or Wire Left Side Rotor, 2014-up
8794-10 Wire 8794-10T
23-6764 23-6765 — — 41500022 11.8” 8793-5 Cast 8793-5T Cast or Wire Left Side Rotor, 2014-up
8794-10 Wire 8794-10T
899
Disc Brake Pad
A B D
C
F G H
E I
J L M
23-0183 23-0912 23-0526 23-0643
Dura Metallic
Dura Ceramic Dura Soft Dura Semi
23-0546 23-4559 23-1781 23-1785
Dura Veloprene SBS Sintered Tech SBS Ceramic SBS Carbon

Disc Brake Pads are available in Dura, SBS, Dura Kevlar, Dura Semi-Metallic for excellent stopping on all types of disc rotors. Dura replacement pads
are a soft compound designed to be compatible to all types of brake disc rotors. SBS brand is available in Sintered, Ceramic or Carbon Tech compounds.
Sintered Metal Pads provides maximum stopping power but can never be used in calipers that were originally equipped with non-sintered pads. Works
best with stainless steel disc rotors. Ceramic Pads are designed for general purpose use on carbon steel rotors and can be used on carbon steel rotors and
can be used on calipers originally equipped with sintered metal brake pads. Carbon Tech Pads designed for use in all stock or aftermarket calipers. Works
well with stainless steel or cast iron rotors. Veloprene is relatively soft compound compared to ceramic or metallic but heat resistant and less abrasive to rotors,
including polished stainless types.
Fits OEM Dura Dura Dura Dura Dura SBS SBS SBS Photo
Metallic Ceramic Soft Semi Veloprene Sintered Tech Ceramic Carbon #
1979-81 XL 43395-80 — 23-0999 23-0510 23-0640 23-0618 — — — A
1982-E87 XL 44209-82 — 23-0912 23-0511 23-0641 23-0619 — 23-1764 23-1776 B
1987-99 XL 44213-87 — 23-0992 23-9163 23-0642 23-0620 23-1780 — 23-1779 C
2000-2003 XL 44082-00 — 23-0993 23-0526 23-0643 23-0546 23-4559 23-1781 23-1782 D
2004-06 XL 42836-04 — 23-0916 — 23-1950 23-1951 23-1952 — — E
2007-13 XL 42029-07 23-0183 23-0910 — — 23-0184 — — — F
2014-up XL 41300053 23-0185 23-0186 — — 23-0187 — — — L
1973 XL 44131-73 — 23-0913 23-0513 23-0644 23-0621 — 23-1763 23-1775 G
1974-77 XL 44281-74 — 23-0915 23-0514 23-0645 23-0623 23-1767** 23-1786 — H
1978-83 XL 44098-77 — 23-0911 23-0509* 23-0646 23-0624 — 23-1760* 23-1783* I
1984-99 XL 44063-83 — 23-0996 23-0512 23-0647 23-0625 23-1784 23-1762 23-1785 J
2000-2003 XL 44082-00 — 23-0993 23-0526 23-0643 23-0546 23-4561 23-4560 23-1782 F
2004-13 XL 42831-04 23-1958 23-0914 23-1959 23-1955 23-1956 23-1960 — — K
2014-up XL 41300004 23-0188 23-0189 — 23-0190 23-0191 — — — M
*Note: Set of Four, **Note: Dura Brand
Replica Steel
V-Twin MfgTM Brake Rotors feature fine finish ground surface. Available with or without
holes in steel with zinc finish unless as construction as noted as stainless. Exactly inter-
Brake Rotor changeable with stock discs. Order bolt set separately.
Drilled Plain OEM
Dia. Bolt Kit Fits Type
FRONT
23-0304 23-0305 41813-79 10” 8738-10 1972-84 FLH Steel
8738-10T 1973 only FX
Cast or Wire
23-0309 23-0310 41806-72B 10” 8738-10 1972-84 FLH, 1973 only FX Steel
8738-10T with built in offset
23-0309 23-0312 Cast or Wire
Vibration Shims fit 23-0311 23-0312 44137-77A 10” 8758-10 1977-83 All FX Cast or Wire Steel
rear pads. Fit 2004- Cast or Wire 2³₈” Inner Diameter Center
up. Replaces 42521- Hole
REAR
04. 23-0307 23-0308 41791-79 11.5” 8791-10 1981-92 Cast or Wire Steel
23-9268 VT No. 23-9268
900
Replica Brake Hose
23-0612 23-0732
Chrome Banjo Bolt Kits for use with universal or stock lines, 23-0723
front and rear, washers included. The VT No. 37-8979 is to be 23-0726
used when a master cylinder or caliper uses a ³₈-24 banjo bolt
and the line has a 12mm hole instead of 10mm.
VT No. OEM Line Size/Item 23-2310
23-0612 41747-82A 10mm ³₈-24
23-0613 41731-82 10mm Washers
23-0614 41739-84 12mm ⁷⁄₁₆-24
23-0615 45583-83 12mm Washers
37-8979 Special Kit 12mm ³₈-24
14-0568 41731-88 10mm Washer with O-Ring
14-0567 41733-88 12mm Washer with O-Ring
Hoses Listed are of stock type rubber construction are D. O.
23-0882 2004-up XL 10mm Hex T. approved.
23-0883 2004-up XL 12mm Hex Front
2300-3 2004-up XL 10mm Dome Hex VT No. OEM Length Fits
2302-3 2000-up XL 12mm Dome Hex 23-0732 45521-74A 40” 1974-77 XL
23-0723 45121-77 19” 1977-79 XL Lower only
1980-82 XL
23-0726 45121-77 19” 1977-79 XL Lower only
Rear
26-0622 23-0517 23-2310 44438-87B Late1987-03 XL
23-2317 44429-06B 2006-11 XL
Brake Hose Fittings for front master cylinder, chrome.
VT No. OEM
26-0622 43307-78 Angle
Type
Brake Tees
23-0517 Converts 10mm late threads to ¹⁄₈” NPT with inverted 23-0570 23-0571 23-0572
flare,early thread hose type, straight.
Banjo Bolt by Russell accepts brake light
switch and eliminates the need for junc-
XL
tion block. Replaces the standard 3/8 x 24
bolt. Sold each. VT No. 23-0746
Chrome Steel Brake Line Tees
VT No. Type
Brake Banjo Seal Washers feature built in O-Rings. 23-0570 Center hole inverted flare ³₈”- 24 UNF, side
tubes ³₈”- 24 UNF, mounting hole ⁵₁₆” I.D.
VT No. OEM Type 23-0571 Center hole 1/8”- 27 NPT,side tubes
14-0567 41733-88 ⁷₈”, 12mm fits handlebar cylinders ³₈” - 24 UNF, mounting hole ⁵₁₆” I.D.
1984-00, single disc 23-0572 Center hole & side tubes ¹⁄₈” - 27 NPT,
14-0568 41731-88 ³₈”, 10mm fits 1982-00 Dual Disc mounting hole ⁵₁₆” I. D.
Brake Calipers
14-0578 41731-01 Fits 2001-up Master Cylinder & Billet Aluminum Brake Tees
Brake Calipers VT No. Type
23-9227 Front ³₈-24 inverted flare in all 3 holes
Allen Button Head Banjo Bolts sold with washers. 23-9228 Rear ³₈-24 inverted flare in 2 holes and ¹⁄₈” NPT in
VT No. Size MM center hole
37-8517 ³₈-24 10
23-0708 23-0705
37-8518 ⁷⁄₁₆-24 12
Universal Straight Chrome Union with bracket.
VT No. Thread
23-0635 ¹₈ NPT
23-0688 ³₈-24
Chrome Front Replacement Brake Tees for XL’s.
VT No. OEM Fits
23-0708 44311-80 1982
23-0705 43310-77 1979-81
36-0351 Chrome Stock Billet Brake Clips.
VT No. 36-0351
901
Brake Fitting
& Bolt
10mm Russell Street Legal Universal Brake Lines. Build it
yourself line assemblies ready for adapter fittings. Preassembled
23-4051 with high performance #3 stainless braided hose with a rugged
23-4054
Veloprene coated inner and crimp-on chrome plated female swiv-
23-4244
23-4279 el hose ends. Clear coated for abrasion resistance. Meets the
23-4050
23-4047 guidelines of the D.O.T. MVSS-106 requirements and are 50-state
23-4052 legal. Compatible with all brake fluids.
23-4053
23-8352 4” 23-8100 28” 23-8202 50”
23-8002 6” 23-8110 30” 23-8170 52”
23-4298 23-4283 23-8010 9” 23-8120 32” 23-8180 54”
23-4396 23-4281
23-4293 23-8020 12” 23-8130 34” 23-8272 56”
23-8030 15” 23-8342 36” 23-8282 58”
23-0746
23-8362 16” 23-8140 38” 23-8229 60”
23-4284 23-8040 17” 23-8242 40” 23-8332 62”
23-4282 23-4380
23-8212 18” 23-8150 42” 23-8312 64”
23-8050 19” 23-8252 43” 23-8322 66”
Chrome Adapter Fittings see listing for application. Sold as each, 23-8060 21” 23-8262 44” 23-5833 68”
unless noted. *Note: Most common use 23-8070 23” 23-8192 45” 23-5835 72”
VT No. Fitting Type Adapts To:
23-8080 25” 23-8372 46” 23-5836 74”
23-4047 10mm Banjo, straight 23-4059
23-4050 10mm Banjo, 35° 23-8090 26” 23-8160 47” 23-5840 80”
23-4055 10mm Banjo, 45° 32-0426 32-0435 32-0443 32-0770
23-4051 10mm Banjo, 90°
23-4052 ⁷₁₆” Banjo, straight
23-4053 ⁷₁₆” Banjo, 35°
23-4056 ⁷₁₆” Banjo, 45° Hydraulic Brake Switch features heavy duty contacts and
23-4054 ⁷₁₆” Banjo, 90° quality brass terminals for 1951-up models.
23-4057 12mm Banjo, straight VT No. Type Fits
23-4058 12mm Banjo, 35° 23-4304
32-0426 Flag 1979-83
23-4059 12mm Banjo, 90°
23-4244 ¹₈” Male NPT, straight 32-0435 Flag 1979-83
23-6033
23-4279 ¹₈” Male NPT, 90° 32-0443* Flag 1984-03
23-4293 ¹₈” Male NPT, 45° 32-0770 Flag 2004-up
23-4298 Male “T” *Note: Black in color
23-6033 Flare Union
A Front Chrome Brake Line
23-6034 ³₈ x 24 Banjo Bolt Clamp fits under triple tree to
23-6035 ⁷₁₆ x 24 Banjo Bolt B secure stainless brake line.
23-6040 10mm x 1.25” Banjo Bolt ¹₄ x 20 mount hole.
23-6041 12mm x 1.25” Banjo Bolt 23-4055
VT No. Type
23-6042 10mm x 1.25” Double Banjo Bolt
23-0746 ³₈ x 24 Brake Switch Banjo Bolt 23-0675 A
23-6037 35° Rear Banjo, 10mm 23-0686 B
23-6038 90° Short Rear Banjo, 10mm 23-4306 23-4307
23-6039 90° Long Forward Control Banjo, 10mm
23-4396 ³₈-24 Male Inverted Flare, straight, 2 pack
23-4380 ³₈-24 Male Inverted Flare, 90° & 120° 23-4305
*Junction block to master cylinder
23-4281 ³₈-24 Male Inverted Flare, 45° 23-4304
*Rear Calipers
23-4282 ³₈-24 Male Inverted Flare, 90°, short
*Junction Block to Front Caliper 23-4303
23-4283 ³₈-24 Male Inverted Flare, 90°, long
Brake Hose Fittings.
*Junction Block to Front Caliper
23-4306 Front Wide Glide Junction Block
23-4284 ³₈-24 Male Inverted Flare, 150°
23-4307 Front Narrow Glide
*Forward Controls
23-4305 90° long forward control banjo, 10mm
23-0688 23-4303 35° short rear brake banjo, 10mm
23-4304 90° short rear brake banjo, 10mm
23-0891
23-0612
Double Banjo Brake Line use with 10mm bolt.
VT No. Item
23-0891 Line
23-0612 Bolt
23-0688 Junction
902
Stainless Brake Line
Year Model Front Diagram# Rear Diagram#

1974-77 +4” Ext 23-8901 1
As Above +8” Ext 23-8902 1
1978-79 XL-XLCH 23-8703 5 23-8800 20
1979 XLS 23-8704 5 23-8800 20
1980 XLS 5, 14 23-8801 16
1980 XLH 5, 14 23-8801 16
1981 XL-XLS 5, 14 23-8801 16
1984-85 XLX 18
1984-85 XLH 23-8722* 9
1984-85 XLS 23-8723* 9
As Above +2” Ext 23-8943 9
As Above +4” Ext 23-8944 9
As Above +6” Ext 23-8945 9
1987-99 XLH 883 Standard 29 23-8834*
(Man. After 2/1/87)
2000-03 XLH 883 Standard 29 23-8835*
2004-07 XLH 883 Standard 23-8794*
1987-98 XLH 883 Deluxe 23-8746* 9 23-8834*
As Above +2” Ext 9 23-8834*
As Above +4” Ext 23-8983 9 23-8834*
1986-87 XLH 1100 23-8722* 9
1987-95 XLH 883 Hugger 23-8746* 9 23-8834*
As Above +2” Ext 9 23-8834*
As Above +4” Ext 23-8983 9 23-8834*
1996-99 XLH 883 Hugger 23-8834*
2000-03 XLH 883 Hugger
Custom
1988-98 XLH 1200 23-8746 23-8834*
1996-99 XLH 1200 Standard 23-8753* 23-8834*
2000-03 XLH 1200 Standard 23-8753* 23-8834*
1996-99 XL 1200S Sport 23-8754* 23-8834*
XL
2000-03 XL 1200S Sport 23-8754* 23-8835*
1996-03 XLH 1200 Custom 23-8755* 23-8834*
1997-98 XLH 1200 23-8755* 23-8835* 34, 37, 48
2004-13 XL 1200C Custom 23-8794
2004-13 XL 50th Anniversary 23-8794
2004-13 XL 1200R Roadster 23-8794
Front Lines-Dual Disc Upper Lines (sold each)

VT No. Year/Model Length Diagram#
23-8908 1978-79 XLH-XLCH Stock 19” 5
23-8909 1978-79 XLH-XLCH +2” 5
23-8910 1978-79 XLH-XLCH +4” 5
23-8911 1978-79 XLH-XLCH +6” 5
23-8912 1978-79 XLH-XLCH +8” 5
23-8906 1977-81 XL Stock 14” 5
23-8926 23-8926 1983 XLH Stock 24” 12
1983 XLH +4” 12
Lower Lines-Dual Disc Lower Lines (2 required, sold each)
23-8908 1978-82 XLH-XLCH Stock 19” 5
23-8909 1978-82 XLH-XLCH +2” 5
23-8910 1978-82 XLH-XLCH +4” 5
23-8911 1978-82 XLH-XLCH +6 5
23-8912 1978-82 XLH-XLCH +8” 5
10mm Stainless Steel Banjo End Dual Disc Upper Hose 23-8909 1977-82 XL Stock 21” 5
fits 1982-up style master cylinders for single or dual disc appli- 23-8910 1977-82 XL +2” 5
cation. Hose has nut with inverted flare at opposite end. The 23-8911 1977-82 XL +4” 5
23-8942 1981 XL-XLS +23” 14
length from the banjo to the first bend is 24”.
VT No. 23-8926
903
41 mm FL Glide Style Fork Kit for XL
Dual 10” Disc Style
24-2024,
24-2036 24-2026
FatsterTM 41mm
Glide Fork
Single 111/2”
Disc Style
Assembly 24-2023,
41 mm Fat
24-2025
Kid Style Fork
Assemblies Only.
Include chrome top
tree, black lower
tree with polished or
chrome lower slid-
ers assembled with
24-0759
hard chrome fork
tubes and axle kit.
41mm Glide Fork Assemblies for 1952-up XL models.

Feature wide style with chrome triple trees, polished or chrome
lower sliders, hard chrome fork tubes, axle, neck bearings, top
cone and stem nut, pinch bolts and bearing dust covers. Fork
VT No. Year Sliders
is 31” overall length. Single disc units accept 11.5” brake rotors,
24-0765 1982-2003 Polish
dual rotors type uses two 10” brake rotors. All units require Big
24-0766 1982-2003 Chrome
Twin WG front wheels. Also available as complete kits with 21”
24-1457 Cone Nut
wheels and black or chrome calipers, brake rotors and brake
disc bolts. Order neck cup set 24-0157 for 1952-78 models.
FLST Fat Kid Units do not include provision for fork lock. Single disc models
Style Style accept 36-0803 speedo drive, dual disc models accept 36-0547
speedo drive kit.
1952-81 Fork Assemblies.
VT No. Type Finish
24-0759 11.5” Single Polish Slider
24-0761 10” Dual Chrome Slider
1952-81 Fork/Wheel Assemblies.
41mm FLST Style Complete Front End Assembly to fit XL These assemblies include 21” chrome wheel, chrome caliper(s)
models. Kits include the complete fork assembly kit, with the drilled disc brake disc(s) and brake disc bolts.
addition of the 5 piece chrome fork cover set, 7” headlamp and 24-2023 11.5” Single Chrome Slider
bracket, 16” chrome wheel, speedometer drive, chrome caliper, 24-2024 10” Dual Chrome Slider
11.5” drilled disc, and fat kid style or FLST style fender. Kits 1982-03 Fork Assemblies.
available with a chrome caliper and polished or chrome lower 24-0040 11.5” Single Polished Slider
legs. 24-0041 11.5” Single Chrome Slider
1982-2003 Fat Kid Style Kit 24-0042 10” Dual Polished Slider
24-2036 Kit with Chrome Lower Slider 24-0043 10” Dual Chrome Slider
1982-2003 FLST Style Kit 1982-03 Fork/Wheel Assemblies.
24-2035 Kit with Chrome Lower Slider These include 21” chrome wheel, chrome caliper(s), drill disc
brake disc(s) and brake disc bolts.
The V-TwinTM Fork Assembly is shipped complete with axle, axle nut, spacer, 24-2025 11.5” Single Chrome Slider
top nut, bearings, cone nut, dust cover, triple trees and fork tubes & sliders.
Fork tubes and sliders are fully assembled with internals. Final assembly of the 24-2026 10” Dual Chrome Slider
remaining components is done by the dealer. Every leg assembly is shipped
dry. We recommend use of the appropriate fork oil such as Type B. The
amount of fork oil to add varies by model. A FX will need about 6 oz per leg, a
FL will need about 8.5 oz per leg and a FXWG need about 10 oz per leg. Due
to oil cling, dry for leg needs about 1 oz more to fill than a drained leg would
Chrome Lower Tree Cover covers area
require. on lower tree below headlamp.
VT No. 31-9991
904
Fork Assembly
35mm and 39mm
Fork Assembly with Polished Lower Sliders.
Complete narrow glide fork assemblies. *Note:
Units have chrome lower sliders.
Dual Single Fits MM Post
Chrome
24-8569 — 1977 only 35 ⁷⁄₈” Neck
Post
24-8570 — 1978-81 35 ¹⁵⁄₁₆” Neck
Post
24-8571 — 1982-83 35 1” Neck
Post
39mm Chrome Fork Assembly fits XL models. — 24-8559 1996-up XLC 39
— 24-8562* 1988-99 39
Kits include: — 24-8566* 2000-03 XL 39
• Chrome Triple Tree Set — 24-8565 2004-up XL 39
• Chrome Fork Sliders
• Chrome Left Side Caliper 24-8562
• 11.5” Polished Stainless Steel Brake Disc
• 19” or 21” Wheel Assembly 24-8562
• Axle
• Fender
• Riser Bushings
• Bearing Set
VT No. Year Wheel
24-0991 1982-99 21”
24-1050 2000-03 21”
24-1051 2000-03 19”
24-1054 2004-up 21”
24-1053 2004-up 19”
41mm Narrow Glide
41 mm Narrow Glide will replace 39 mm
assembly on XL models. Use with original
XL
wheel and brake assembly from 1984-03.
Wheel not included.
VT No. Item Type
24-1275 Fork Assembly Dual
24-1276 Fork Assembly Single
24-1275 52-0170 19” Wheel Single/Dual
52-0171 21” Wheel Single/Dual
44-0852 Axle Dual
Fork Brace
35mm Chrome Forged
Aluminum Fork Brace
add rigidity to forks by
clamping to fork seal area
39mm Chrome Fork Braces are of lower leg. Fits XL with
machined from Billet aluminum, 24-0841 Showa forks.
easy to install and offers increased Installed VT No. 24-0323
torsional rigidity. Fits 1987-up XL 39 mm Kwik-Klip attaches brake line or speedo
by clamping over chrome dust boots. cable to fork leg.
VT No. 24-0841 VT No. 24-1023
24-0497
24-1040 50-1141
24-1036
Fork Brace fits 2010-up XL 1200X.
VT No. Finish
24-1036 Chrome
24-1040 Black
50-1141 Fender
905
39mm Triple Tree 24-1020 24-0857
24-0879 24-0936 24-1037

24-0856
24-0858 24-0897
24-0665
Triple Tree Sets include upper and lower trees to fit 39mm
fork tubes as stock on 1990-up.
Chrome Polish Years
24-0879 24-1293 1988-03
24-0936 24-1294 2004-13
39 mm Lower Tree Applications.
2272-5 Screws
24-1037 2011-up “48” 24-1035 VT No. Fits Finish
24-0856 1988-03 XL 1200 Polish
1995-03 XL 883
24-0857 1996-2003 XLC Polish
24-0865 24-0898 24-1034 24-0665 As Above, XLC Chrome
Top Triple Tree for 1988-up. 24-0858 1988-94 XL 883 Black
Chrome Polish Year 24-0897 2004-13 XL’s Chrome
24-0865 24-1331 1988-2003 24-1035 2011-up “48” Chrome
24-0898 24-1092 2004-2016 24-1067 2004-13 Polish
24-1034 2010-up “48”
Chrome Lower Triple Tree Cover
fits 39mm forks 1987-up designed for
24-0637 24-1278
easy installation.
VT No. 42-0342
Lower Fork Stem Retaining Ring for

1986-up all models. Replaces 45611-86. 37-9073
37-9073
39mm Chrome Fork Stem Nut Covers fit over stock stem nut
Upper Bracket Cover fits 1988-up and held in place by set screws. *Note: Includes (2) fork tube
XL-FXD 39mm forked models, when cap covers and (1) stem nut cover for 1988-13 XL 883-1200.
using a custom bottom mount headlamp. VT No. Fits Type
VT No. Item 24-0637 1988-up XL Stem Only
37-9073* 3 piece Set Flat
42-0861 Cover
24-1278* 3 piece Set Dome
2272-5 Screw Set 24-1296* 3 piece Set Pointed
37-9520 3 piece Set Flat with Grooves
Steering Stabilizer Kit
Billet Fork Stop to be 27-0057 Chrome Steel Mount
24-0171
mounted to billet triple Clamp with 3/8” mount hole.
tree sets to allow for fork Use to mount damper body
stops. Drilling of tree may to frame tube. Sold as a pair.
be required. VT No. Inner Diameter
VT No. 24-0749 27-0057 1”
24-0664 Stop Plate mounts to cus- 27-0059 1¹⁄₄”
tom triple trees under lower 24-0657 Steering Damper Fork
bearing for 39mm and 41 Tube Clamp in alloy
mm forks. finish available in 2 piece
24-0172
VT No. 24-0894 design for attaching
39mm Steering Stabilizer Kit includes
Steering Damper is heavy alloy damper end to fork tube.
brackets and adjustable round body
dampener piston. Fits 883-1200. universal, multi-position, and adjust- Size VT No.
24-0168 able, can be secured between the 39mm 24-0657
VT No. Year
frame and most forks. Fork tube and 41mm 24-0658
24-0171 1988-03 frame clamps sold separately.
24-0172 2004-06 VT No. 24-0168
24-0664 2007-up
906
33 and
35mm
42-0308
Triple Tree
Top Triple Tree for Sportsters.
VT No. OEM Year Finish 24-0808
24-0801 45739-62B 1954-72 Cast
24-0802 45738-73 1973-87 Cast
42-0291
24-0803 45738-73 1973-87 Polished
24-0826 45736-78B 1973-87 Chrome
42-0290 28-1503 Bushing Set 1954-99 Lower Trees. Steel construction.
37-0860 Screw Kit 1962-86 VT No. OEM Years Tube (mm)
Fork Stem Lock 24-0807* 45703-71 1957-72 33.4
Tabs replace bro- 24-0808 45703-73 1973-77 35
ken, bent or missing 24-0930 Chrome 1973-77 35
on stock lower triple 24-0809 45703-78 1978-81 35
Chrome Lower Fork Stem Covers trees, to be welded 24-0810 47693-81 1982-87 35
for 1957-85 with 35mm forks. VT No. on. Fits 1981-83 *Note: Requires use of 15/16” tapered
42-0290 can be installed without disas- XLH. bearings.
sembling forks. VT No. 42-0308 replaces VT No. 51-0099 Chrome
45750-70 in one piece style. Fork Stem
VT No. Type Style Nut Cover
42-0308 1 Piece Smooth to fit over
42-0291 1 Piece XLCH Allen 37-9220
Hex stock stem
42-0290 3 Piece Smooth nut and
Lower Stem Pinch Bolts.
8757-8 Allen Screws for Above held in place by set screws. Cover is one
VT No. Type Finish
37-8834 Hex Zinc piece. Fits 1980-up 39 mm fork.
37-9220 Allen Chrome VT No. 24-1336
Top Stem Nuts
XL
Chrome Flat Top
9978-2
Stem Nut replaces
45718-71 on 1978-87.
8809-6 VT No. Item
Stem Bolt and Cover Kit includes 37-8137 Nut
sleeve, stem bolt, dust shield, spacer rub- Chrome Domed Shaped Fork Stem 9963-1 Washer
ber plug and chrome cover. Fits all 1957- 37-8137 37-0988 Washer
Nuts.
78 without steering damper. VT No. Fits 37-0443 Acorn Stud for use on 1987-
VT No. OEM Item 7618-1 1952-77 up FXR-FXST. Order nut
8809-6 Kit Nut Kit and Cover 7618-1T 1952-77 separately.
8810-2 Kit Cover 37-0598 1952-77 24-1209
VT No. Item
24-0223 45752-52 Spacer 7619-1 1978-87 24-1209 Stud
24-0224 45721-54 Sleeve 7619-1T 1978-87 37-0443 Acorn Nut
9978-2 1988-up
39mm to 41mm Conversion Kit
Narrow Glide Conversion Kit to fit FXD-XL 39mm
24-0958 models includes upper and lower triple trees, stem,
24-0958 stem nut, fork stops, axle, axle spacers and fend-
Installed er spacers. For use with 1984-99 FXST/FXDWG
41mm fork leg assemblies and 1984-99 narrow
glide 19” or 21” wheel assembly with aluminum hub
and front fender. Accepts OEM 11.5” brake disc
and caliper (custom brakes may cause interference
with laced wheels). Measures 415/16” between fender
mounts. For front wheel speedometer operation,
Narrow Glide Conversion Kit
replace left side axle spacer with speedometer drive
allows use of 41mm leg assem-
unit.
bly, 1984-99 style and utilizes
VT No. Item
the original FXD or XL 19” or 21”
24-0958 Kit
wheels, and the caliper and brake
36-2450 Speedometer Drive
disc from the original motorcycle.
24-0958 is shown with stock leg
assembly 24-0510 FXST style. 907
Chrome Fork Tube
Fork Tubes are precision machined with ground
35 and 39 mm
finish for fit and quality. Available in chrome or
hard chrome as stock. Sold in pairs. Fork Tube
39mm and Slider
Assembly
1988-08 XL models 883-1200, 39mm except Hugger
24-0020 23³⁄₈”, Hard Chrome
24-0437 23³⁄₈”, Chrome
24-0019 25³⁄₈”, Chrome
24-0439 27³⁄₈”, (+2”) Chrome
24-0442 29³⁄₈” (+4”) Chrome Fork Tube and Slider Assembly available in right and left
2009-up All XL models except XL883L, XL1200L, XL 883N, pairs, completely assembled. Units have hard chrome fork
XL 1200N tubes, and either polished or chrome lower sliders, with springs
24-0390 Stock Hard Chrome and all internal components installed.
24-0391 2” over stock 39mm
24-0392 4” over stock
VT No. Disc Fits Slider
24-0590 Single 1994-99 XLH Chrome
35mm 24-0984 2000-03 XL Chrome
1975-83 XLH-XLCH-XLCR, 1983 XLX-XLS 24-0384 2004-up XL Chrome
24-0013 Stock 23¹⁄₄”, replaces 45407-75, Hard Chrome 35mm
24-0425 2” over stock, replaces 45644-77 VT No. Disc Fits Slider
24-0427 6” over stock 24-0589 Dual 1977-84 Polished
1979-82 XLS models, Showa Fork. 35mm.
24-0425 Stock 25¹⁄₄” replaces 45644-77
24-0427 4” over stock 24-0107
1973-74 XL, Kayaba Fork. 35mm.
24-0015 Stock 23¹⁄₂”, replaces 45977-73, Hard Chrome
24-0422 4” over stock 39 mm Fork Tube Assembly includes internals with springs,
1973-74 XL assembled for 1987-99. Tube length is 233/8”.
24-1073 Stock 23¹⁄₂” VT No. 24-0107
1984-E86 XL, except sport pkg. 35mm.
24-0016 Stock 23¹⁄₄”, replaces 45407-83, Hard Chrome 24-0373 24-0079
24-0430 2” over stock replaces 45392-83, Hard Chrome
L1986-87 XL, 35mm.
24-0434 Stock 23¹⁄₄” replaces 45407-86
33.4mm
1954-72 XL
24-0012 Stock 22³⁄₄” replaces 45953-71, Hard Chrome
24-1316 24-1318
24-0353
39mm Chrome Single Disc Lower Fork Sliders for XL’s.
VT No. Fits
24-0373 1988-99
24-0079 2000-07
24-0353 2008-up
2273-7 Bolt Set
24-1317
Note: See Vintage section for 1952-72 components.
24-1315 Attention!!
Fork Cover Sets fit the space between the triple trees and tion per model. It can be difficult to identify the front end assemblies because
cover the fork tube like the 1960’s styling. Note: Will not fit “48” they may not always be original equipment. Before installing, compare old and
new tubes. Be sure the stock top plugs fit into the new fork tubes. To avoid
models, required front fender removal 14” long. scratching the chrome, we suggest that the tubes be lightly rubbed with oil
before installing into fork legs. Be absolutely sure you have the right tubes
1986-03 2004-up Finish before you install them. No fork tubes can be accepted for return that are
24-1316 24-1318 Black scratched or damaged due to improper installation or handling.
24-1315 24-1317 Chrome
908
E-Z Fill Fork Tube Top
Plugs feature a small oil fill 33.4, 35 & 39 mm Fork Plug
cap built into fork tube top
plug which will allow fork oil 7622-1 7622-1T 37-8988
24-0863 change/fill without removing
top fork cap. Pairs.
VT No. Type Fits
24-0862 35 mm 1973-85
24-0863 39 mm 1988-up
Chrome Top Fork Tube Plug
replaces 45756-59. Sold each. For
1957-72.
VT No. 7621-1 24-0166
Fork Tube Spring Retainers and Pin Wrench 8863-1
Kit includes 2 retainers for 1952-72 XL and pin
Chrome 35 mm Fork Plugs.
wrench for installation removal of retainers.
VT No. OEM Year
VT No. 7700-3
7622-1 45993-73 1973-85
9914-2 7622-1T 45993-73 1973-85
37-8988 As Above Pair
24-0166* 45933-74 1974-85
8863-1 45993-86 Late1985-Mid87
24-0335 *Note: 24-0166 is drilled and tapped to accept gauge mounts.
Chrome 39 mm Fork Plugs. Replace 45596-87.
VT No. Year Type UM
9914-2 As Above Domed Each
24-0335* 1988-up Flat top type Pair
Fork Spring
Fork Tube Spring Sets fea- 20th Century Fork Spring
24-0160
ture high tensile strength wire Lowering Kits for Showa forks
construction with ground ends. have progressively wound springs
Sold in pairs for OEM replace- that resist bottoming out. Installation
ment per the factory number. requires minor disassembly to lower
XL
For more fork spring applica- the front forks 1 1/4” or 2” depending
tions check factory parts book. on the spacer used. Kit includes springs, spacers and hard-
ware. Easily converts back to stock by reinstalling stock fork
VT No. OEM Fits MM springs.
33.4mm VT No. Type Model
24-0822 46057-52 1952-70 XLH-XLCH 33.4 24-0160 39mm 1987-95
24-0900 46057-71 1971-72 XLH 33.4 24-0161 35mm 1975-87
24-0901 45984-73 1973-74 XL 35
39mm Street Tough Fork Springs
24-0904 45408-75 1976-83 XLH-XLCH 35
by 20th Century Suspension.
24-0903 45987-77 1979 XLS 35
Progressively wound springs are
24-0905 45907-80 1980-83 XL 35
made using drawn spring wire.
24-0906 46052-80 1980-82 XLS 35
Eliminate front end sag, reduce
24-0913 45376-87 1987-94 XL 39
nose dive under braking and
Except Hugger
improve stability. Fits 1988-91
24-0933 45372-92 1992-96 39
Showa.VT No. 24-0164
24-0919 45376-97 1997-2003 39
24-0932 45376-04 2004-2008 39 24-2056 24-2040
Progressive Suspension
Fork Lowering Kits.
Each kit comes with
Progressive rate fork springs
and spacers. Each kit can be
installed at two different lev- Progressive Suspension Fork Springs feature high quality,
els to lower fork 1” or 2”. high performance replacement fork springs that eliminate front
VT No. Fits end sag, reduce nose dive under braking, improve cornering
24-1560 1988-up stability, increase ride comfort and allow forks to utilize full
24-1559 1984-87 travel. Sold in pairs.
VT No. Size Fits
24-0883 39 2004-up XL
24-2056 39 1988-up XL except Hugger
24-2045 39 1992-up XL Hugger
24-2040 35 1952-87 XL-XR
909
Fork Damper Tube Fork Damper Tubes less hardware, pairs.
VT No. OEM
39mm
Fits
24-0454 24-0457
24-0464 45925-88 1988-93 XL
24-0476 45925-94 1994-96 XL
24-0477 45925-97 1997-08 XL
24-0676 45462-87 1987-up XL, Nylon Ring
24-0677 45460-90 1990-up Dynaglide Nylon Ring
35mm
24-0096 45409-75 1975-83 XL Showa
24-0675 45412-75 1975-86 Nylon Ring
24-0473
24-0446
Lower Damper Tube Springs.

VT No. OEM Fits
13-9210 46062-71 1971-72, pair
13-9160 45382-83 1983-86, 10 pack
13-9258 45374-87 1987-up, pair
Lower Damper Tube Stop, sold in pairs.
VT No. OEM Fits
24-0474 24-0475 24-0459 45918-73 1973-77 XL Kayaba
24-0094 45402-75 1976-83 XL Showa
24-0460 45403-84 1984-87 XLH
24-0466 45463-87 1988-89 XL
24-0375 45361-90 1990-up XL
Fork Drain Plug

Fork Damper Tube Kit includes for 2 sides, damper tubes
with rings, screws and washers, lower stops, slider seal wash-
ers and retaining rings.
VT No. Type Fits MM
24-0454 Steel Leg 1971-72 XL 33.4
24-0457 Kayaba 1973-76 XL 35 9907-4 9910-4 24-0010
24-0446 Showa 1976-83 XL 35 Fork Drain Screws are supplied with washers, pair.
24-0473 Showa 1988-93 XLH 39 VT No. Use Finish
24-0474 Showa 1994-96 XLH 39 9907-4 1952-72 XL-K Chrome
24-0475 Showa 1997-up XLH 39 9908-4 As Above Cadmium
Damper Tube Screw. 9910-4 1973-up Showa Chrome
VT No. OEM Type 24-0010 1976-up Showa Chrome
24-0188 45995-73 Kayaba, 1973-86 Drain Screw Fiber Washers available in 10 packs.
24-0787 45405-75A Screw pair with washer, showa VT No. OEM Years Use
24-0786 Showa Screw only, 5 pack 14-0959 6218W 1952-72 Early XL
14-0019 45986-73 1973-75 Kayaba
Damper Tube Washers in 10 pack. 14-0020 45403-75 1976-up Showa
VT No. OEM Fits
14-0017 45992-73 1973-74 XL Kayaba Chrome Fork Slider Axle Cap is for the left
Fiber side. Cap is of alloy material with a chrome finish.
14-0018 45406-75 1975-up XL Showa Fits 1975-83 models with 35 and 39 mm fork
Copper tubes. Replaces 45410-75.
VT No. 24-0505
24-0505
1952-70 Internal Conversion. Send us your lower Sportster

legs, we will update by drilling to accept later 24-0454 damp-
er tube kit. New bushings can be added at the same time for
an additional charge.
VT No. 60-0235
910
Fork Boot
24-9939
Chrome Wiper Boot Covers are die cast Cover

to fit over the stock rubber fork wiper boot.
VT No. Type Year MM
24-0104 Kayaba 1973-74 XLH 35
24-0105 Showa 1975-87 XL 35
24-9939 Showa 1988-up XL 39
Two Piece Chrome Fork Boot Cover

24-0090 Sets install overstock rubber fork boot by
the unique interlocking springs, supplied
with the kit, to securely hold boot covers
Black Rubber Fork Boots are designed in place. 35 mm. Fits 1973-87.
for a better fit and improved sealing and VT No. 24-9992
wiping action. Sold pairs.
Gaiter Fork Boots are flex-
VT No. OEM MM Fits
ible type for 39mm forks.
28-0900 46001-71 33 1971-72
Rubber boots are 230 mm
28-0902 45983-73 35 Kayaba forks
long, black, sold as a pair.
1973-74
VT No. 28-0440
28-0903 45404-75 35 Showa forks
1975-87 28-0885 39mm Fork
14-0956 28-0905 — 35 As Above White Gaiter fits
39mm Fork Boot Cover Dust Shield Kit Nightster
fits 1988-up. XL-FXD.
VT No. Item VT No. Type
24-0090 Complete Kit 28-0758 28-0758 XLN
14-0956 Seals only 28-0885 V-Twin
Fork Seal Kit

14-0043
XL
Fork Seal Sets are molded with factory
part number, sold in pairs for XL models.
VT No. OEM Years MM
14-0010 45975-71 1971-72 32.5
14-0704 14-0013 45927-73 1973-74 35
14-0942 14-0011 45400-75 1975-82 35
GB Deluxe Fork Seal Rebuilding Kits
include all pieces illustrated as appropri- 14-0016 45387-83 1982-87 39
ate for each application. 14-0021 45378-87 1988-up 39
VT No. Fits Size 14-0956 45401-87 1988-up Dust Seal
14-0702 1973-74 Kayaba 35 mm
14-0703 1975-84 Showa 35 mm
14-0704 1988-15 Showa 39 mm V-Twin Deluxe Seal Kits include seals,
14-0705 1984-87 Showa 35 mm gaskets, snap rings, washers and o-rings.
A-Slider Seal Washers are zinc plated.
Leak Proof Fork Seals James Kits include seals and o-rings only.
VT No. OEM Year
feature a Veloprene James VT No. MM Year Fits
24-0642 45928-73 1973-76
coating to reduce drag — 14-0043 33.4 1952-70 XL-XLH,
24-0091 45911-80 1980-83
and carry a manufac- Gasket only
turer’s lifetime guaran- 14-0039 14-0940 33.4 1971-72 XLH-XL Fork Seal Retaining Ring.
tee, sold in pair. 14-0040 14-0941 35 1973-74 XLH, VT No. OEM Year Model
Kayaba 24-0641 45931-73 1973-76 XL
14-0041 14-0942 35 1975-84 XL Showa 24-0613 45401-75 1975-80 XLH
VT No. Size Year 14-0044 14-0998 35 1984-87 XL 24-0614 45908-80 1980-87 XL
14-0250 35 mm 1973-74 XLH-XL Kayaba 14-0042 14-0943 39 1988-15 XL 24-0623 45905-87 1988-up XLH
14-0251 35 mm 1975-87 XL, Showa Fork Seal Spacer fits 1986-87.
14-0024 39 mm 1988-up XL Replaces 45386-83.
VT No. 24-0627
911
Neck Cup Kit
24-0135 24-0195
24-0225 24-1098
Neck Cup Kits for Sportster to convert 1952-77 ball bearing

24-0110
style cups to Timken tapered type. Complete conversion kit
includes two (2) chrome cups, two (2) tapered bearings and
dust shields, 1978-up types are for stock replacement.
24-0157 VT No. OEM Year Item
24-0225 Kit 1952-77 Complete Kit
Ball Bearing Neck Cups available in pairs as zinc cups only or 24-0232 Set 1952-77 Bearing Set
chrome kit with races and balls. Fits 1952-77 Sportster. 24-0233 Set 1952-77 Dust Covers
Note: Sportsters use 28 ball bearings. 24-0157 Set 1952-77 Cups with Races
VT No. OEM Finish 24-0338 48310-78 1978-81 Cups with Races
24-0110 48310-30 Zinc Cups 24-0101 45586-78 1978-81 Bearing Set
24-0135 Cpt. Kit Chrome 12-0354 As Above Each
24-0195* Cpt. Kit Chrome 24-0221 45597-78 1978-81 Upper Dust Shield
12-0157 8860 ⁵⁄₁₆”, Balls 50 piece 24-0619 48370-78 1978-81 Lower Dust Shield
12-0128 8860 ⁵⁄₁₆”, Balls 30 piece 24-9935 All 1978-81 Kit with 2 Dust Shields
24-0099 48346-39 Upper Race 24-9936* All 1982-up Kit with 2 Dust Shields
24-0621 48347-52 Lower Race 24-0118 Set 1982-up Bearings Only
*Note: Includes top nut, sleeve and dust cover. 24-1098 Set 1978-81 Cups without races
Fork Stem Bearings and Races. 24-1324 Kit 7/8” to 1” Conversion Kit
Order separately as noted for 1982-up *Note: Does not include neck cups.
XL.
Dust Shield Sets include upper and
VT No. OEM Item U/M lower for 1982-up.
24-0118 48360-60 Bearings Pair VT No. Finish
12-0384 Peer Bearings Pair 24-0117 Zinc
12-0335 Timken Bearing Each 24-0114 Chrome
12-0348 48315-60 Race Each Dust Shields zinc plated. *Note: Chrome
12-0383 Peer Race Each VT No. OEM Fit Model
Neck Cup Kit features solid 24-0221 45597-78 Upper 1978-81
internal fork stops that are 24-0618* 48361-80 Upper 1982-up
built into the cups and hidden 24-0112 48365-48A Lower 1982-up
away. Fits stock and custom 24-0619 48370-78 Lower 1978-81
rigid frames that accept stock 24-0111 48370-52 Upper 1952-78
XL neck cups. Kit includes 14-0174 48184-01 Upper/Lower 2004-up
cups, races, bearings and cov- Bearing Seal Set fits 2004-up XL mod-
ers. Note: Drilling of triple tree els.
required at bearing area. Fits 1957-81. VT No. 14-0174
VT No. 24-0236
“Raked” Neck Cups

24-0289 24-0291
24-0294 “Raked” Chrome Neck Cup Kits provide 3° rake when

1988-03 “Raked” 3° Chrome Neck Cup Kit includes a chrome installed.
cup set, bearing set, dust shields, and a longer fork stem and VT No. Year
adapter. Rake requires long fork tubes and neck lock cannot be 24-0289 1952-77
retained. This has a built in external fork stop tab. Raked neck bear- 24-0291 1978-81
ing and race kits will require longer fork tubes to be installed on all
applications. There is a second spacer machined in cup. For show
use only. VT No. 24-0294 Note: Rake Neck Kits are for Show Applications only and
Require longer Fork Tube to be Installed.
912
27-0047 Kickstand
27-1668
27-0509
27-1515 27-1730
27-1688
27-0510
13-9162
27-1672
27-0048
27-1688 27-0806 27-1733
27-0520
27-0946
Forged End Kickstands in chrome.

VT No. OEM Years Length
1984-up Kickstands. 27-0806 — 1952-83 Stock
VT No. Year Item 27-0509 50006-80 1952-83 Stock
27-0520* 1990-03 Short Stand 27-1688 50062-52A 1952-79 Stock
27-0047 1984-88 Stock Stand 27-1516
27-1733 2” Short
27-1515 1984-88 Extended Stand 27-0510* Extended 1952-83 11.5”
27-0048 1984-88 Catch 37-9117 Fits 27-0509 and 27-0510 Pin
13-9159 1984-88 Spring 27-1500 Fits 27-1688 Pin
27-1668 1989-03 Stock Stand 3181-5 Zinc, clevis pin preztel clip 5 pack
37-9153 1989-up Pin 3182-5 Chrome , clevis pin preztel clip 5 pack
13-9162 1989-up Spring
XL
*Note: For use with +2” or +4” forks.
2004-up
27-1672 2004-up Stock Stand 37-9153 13-0154
27-1730 2004-up 1” Lower
27-0946 2008-up Stock
27-0492 2011-up Stock 13-9159
27-0019 2004-up Stock, Gloss Black
27-0020 2004-up 1” Lower, Gloss Black
27-0828 2004-up Chrome Kickstand Kit
27-1516 1989-up Bushing Set 13-9162
37-9153 1989-up Pin Chrome Kickstand Springs 13-0545
13-9162 1989-up Spring
*Note: Hugger type for lower shocks. VT No. Years
13-0154 1952-83
27-0257 27-0257 Assembled 13-9159 1984-88
13-9162 1989-06 28-2234
13-0545 2007-up
28-2234 1990-07 Bumper Stop
Weld On Kick Stand Assembly includes weld on type heavy
duty mount, chrome spring and chrome kick stand with forged 27-0025
flat end.
VT No. Item 27-0522
27-0257 Kit
27-0795 Bushing
51-0515 27-1500 Kickstand Tab and
Pin for 1952-83. Tab is
for weld on repair. Pin Kickstand Extensions allow rider to more readily access side
includes screw. stand. Replaces 50212-98 and fits 1984-up.
VT No. Item VT No. OEM Model Finish
51-0515 Repair tab 27-0522 50212-98 1984-2003 XL Chrome
27-1500 Pin kit 27-0025 50250-04 2004-up XL Chrome 27-0025
1952-81 K/XL Center Stand is 27-0801 Black 2007-up XL Black Installed
constructed of cast aluminum and Kickstand Extension Kits include chrome mounting hardware
includes spring and hardware for and rubber type extended peg easier operation of kickstand.
mounting to stock swing arm frames. VT No. Fits
Replaces 49701-57. VT No. 27-0548 27-0093 2004-06 XL
27-0094 2007-up XL
913
Driver Footpeg 27-1556 12-0552 27-0044 23-3024
Support 12-2117
23-3079
23-1728
27-1638 23-3015
23-0780
27-1624 27-1735 23-3080
Driver Peg Support Bars are the splined type, less pegs fit
1952-74. Replaces 50948-71 left, 50949-67 right. Use with Foot Rest Supports and Studs.
large female type driver pegs. VT No. OEM Years Item 27-1577
VT No. Finish Left Side
27-1624 Zinc 27-1556 50948-75 1977-85 Support
27-1735 Chrome 12-0552 24752-75 1977-85 Stud
Chrome Forward Control Footrest 27-1638 50951-90 1991-03 Support
Support fits XLC models with for- 27-0817 42972-04 2004-up Support
ward controls. VT No. 27-0010 Right Side
23-3024 34886-86A 1986-90 Stud
27-1577 50949-75 1977-79 Support
12-2117 247751-75 1977-79 Stud
23-3079 42441-90A 1991-03 Peg Clevis
23-3015* 42441-80 1980-90 Pivot-Stud
23-0780 42971-04 2004-up Support
23-1728 34909-83 1983-90 MC Support Bracket
23-3080 34909-90 1991-03 MC Support Bracket
*Note: Acts as foot support brake pivot.
Rear Peg Mounts

Passenger Peg Mount Bracket Sets 27-0633 27-0634 27-0631
Only. Use with male style peg.
Chrome Black Years
27-1564 — 2004-13
27-0825 27-0271 2014-up
A 27-1686 27-1685 27-1687 C 27-1561

B
D
Rear Passenger Peg Mounts (D) Replaces 50610-86 on

1986-2003 models, to mount rear passenger pegs to swing
arm. Choose pegs to complete or order kit. VT No. 27-0634 Shown on motorcycle
VT No. # Item Chrome Rear Footpeg Brackets bolts to rear motor mount
27-1686 C-A Kit bolts, for use on Rigid or Swing Arm frames.
27-1685 C-B Kit VT No. Fits
27-1687 C-D Kit 27-0633 1957-78 Sportster, uses large female
27-1561 C Mounts Only Driver pegs 27-1215, 27-1220 and 27-1581
Rear Passenger Peg Relocation Bracket Set fits 2004-13 27-0634 1982-90 XL use 27-1227 Small Male Pegs
XL with 30-0300 pipe set. Black finish. Order chrome footrest 27-0631 1957-81 except 1979 use 27-1227
for support bracket separately. Small Male Pegs
VT No. 31-0766
Luggage Rack
Chrome Sissy Bar Luggage Rack of solid Bolt On Luggage
steel fits all 16” tall sissy bars, unique design Racks mount to rigid
for easy installation or removal. Mount holes side straps of sissy bar
are 2⁵⁄₈” center to center and 5¹⁄₄” wide. May on 2004-up XL models.
require drilling for some applications. VT No. Model
50-0589 50-0589 Rack
VT No. 50-1011
50-0847 Side Plate
50-0847
50-0841 Sissy Bar Top
50-0841
914
Sissy Bar
50-1626 50-1628 Sissy Bar for 2004-up XL.
Solid Detachable Height
50-1634 50-1625 20”
50-0847 50-1626 50-1627 16”
50-1628 50-1629 11”
50-1630 50-1631 Grab Rail
50-0812
50-0816
50-0843
50-0464 50-0466 50-1542 50-0467
50-1630
50-0814 50-0320 50-0841 50-0458

50-0468 50-0469
50-0460 Sissy Bar Assemblies.
VT No. Bar Side Plate Style
1957-78 XL
50-0464 13” Round Non-detachable
1994-03 XL
2004-up XL
XL
50-1542 16” Round Non-detachable Mt Straps
50-0459 50-0893 50-1192 50-0645
50-0467 13” Round Detachable 50-1511
50-0808
50-0847 50-0807
50-0469 16” Round Detachable
50-1630 6¹⁄₄” x 7¹⁄₂” Non-detachable
50-0810 50-1511 21” One Piece
Sissy Bar Side Strap & Back. Order top and straps separately. Solid mount 50-1226 10¹⁄₄” Low Profile Glossy Black
type. 50-1621
Fitment Side 16” Back 11” Back 20” Back Sissy Bar Back Width 50-1623
Straps
2004-up 50-0847 50-0841 50-0842 50-0461 7¹⁄₂”
50-0843 Grab Rail
2004-up 50-1198 Black, Side Plates
50-1514 Round, Black
50-1192 Round Chrome 50-1624
1994-03 50-0807 50-0812 50-0816 50-0458 6³⁄₄”
1994-03 50-0893 Round
1979-93 50-0808 50-0813 50-0817 50-0459 8” 50-1622 50-1558 50-1559
1979-93 50-0320 8” Round 31-1304
1979-93 50-0387 As Above, Black 31-1315
1957-78 50-0810 50-0814 50-0818 50-0460 7³⁄₈”
1957-78 50-1192 7³⁄₈” Round
1979-93 50-0323 Round
Screw Set 37-1509 50-1512
50-1651
Detachable Side Plates, Dockable Hardware and Back for 1993-up models.
Side Plate 11” Black 14” Black 16” Black Hardware Year
50-1621 50-0816 50-0643 50-0812 50-1622 2004-up
Sissy Bar Grab 50-1623 50-1624 1994-03
Rail Combo. 50-1558 Cam Lock, Chrome
50-1559 Cam Lock, Black
VT No. 50-0503 50-1651 Mounting Kit for detachable rack
31-1315 Bushing Set (2)
Sissy Bar Inserts. 31-1316 Bushing Set (2) Narrow
31-1304 Bushing Set for docking points (2)
VT No. Type Finish 50-1512 Stainless Steel Bushing Set (4)
50-0820 Cross Chrome 31-1300 Bushing Set, Narrow, Chrome
31-1301 Bushing Set, Narrow, 53697-06
42-0156 Eagle Brass 31-1302 Bushing Set, Narrow, 53942-04
31-1303 Bushing Set, Wide, 53943-04
31-1312 Bushing Set, Narrow, 53967-06
50-0820 42-0156 915
Belt Guard 27-0619
27-1667 27-0123
27-0862
27-1745
Belt Guards.
Chrome Black Year
27-1667 1991-99
27-0123 2000-03 27-0541
27-1745 2004-up 27-1443
27-0862 27-1443 2004-up
27-0788
27-1645
20-0784
27-0788
Installed
Lower Belt Guard for XL’s. 27-0542
Chrome Black Year
27-1645 1991-2003
27-0788 2004-up
27-1445
20-0784 2004-up
27-0112 27-1573
Chrome Chain Guards with spatter apron.
VT No. Year
27-0112 1983-87 Chrome Guard/Rear Pulley/Dress Up Kit includes belt guards,
27-1573 1988-92 upper and lower, and 61T rear pulley cover for 5-Speed belt
42-0670 42-0934 drive models with hardware.
VT No. Year
27-0541 1991-99
27-0542 2000-03
27-0619 2004-13
27-0848 2004-up
42-7512
27-0103
27-0401
27-0400 27-0106
42-1132
Chrome Rear Pulley Cover. Order chrome torx bolt set sepa-
rately.
VT No. Year Tooth
42-0670 1991-2003 61 27-0107
42-0934 2004-up 68 Chrome Chain Guards for Sportster.
42-7512 2004-up 68 VT No. Year/Model
42-1132 2004-up, Black 68 27-0103 1954-71 XLCH
Universal Right Side mea- 27-0401 1972-78 XLCH
sures 25” length. 27-0400 1972-78 XLH
VT No. 27-0101 27-0106 1979-81 XLCH-XLH
27-0107 1982 only XL
916
Front Fenders fit
35mm and 39mm Fork
50-0120 50-0392
50-0122 50-0136
50-0119 unassembled
50-0123 50-0164
50-0932
50-0789
Front Stock Type Fender in raw steel, has chrome tubular 50-0165 50-0889
type brackets riveted in place.
VT No. Year Type Cable Bracket 50-1140
50-0120 1970-83 Assembled Right
50-0392 1970-83 Assembled Left
50-0119 1970-83 Bobbed 37-6370
50-0932 Bracket set 50-0191 Note: Raw finish
50-0789 1984-91 Assembled
37-6370 — SS rivets, 25 pieces
Chrome Front Fender Allen Head 50-0270 50-1583

Screws to assemble brackets to stock
front fender and attach fender to fork.
VT No. Brand
XL
37-6367 GW 50-1584 50-1585
2531-12 Colony Front Fenders for 35 or 39mm forks feature a raw or chrome
Early Front Fender for 1957-69 replac- steel fender with brackets riveted on to fit 19” wheels. 50-0122
ing 59007-52 stock fender, braces rivet- fits 19” wheels on 1973-90 XLX models, 50-0164 fits 1973-up
ed on, raw finish. models with 21” wheel and 1991-up with 19” or 21” wheel.
VT No. 50-0129 VT No. Finish Brackets
50-0122 Plain Chrome
50-0136 Plain Raw 50-0889 Raw Raw
50-0123 Chrome Chrome 50-1140 Raw Raw
50-0164 Raw Chrome 50-0270 Raw Raw
VT No. Finish Brackets Rib Style
50-0165 Raw Raw 50-1583 Raw Raw
50-0191 Chrome Chrome 50-1584 Raw Chrome
50-0133 50-0195 50-1585 Raw Chrome
Spring Fork Style Front Fender is the

classic shape and flare in 5” wide for 19”
and 21” wheels. Includes chrome braces.
Fits 1973-up.
50-0196 50-1586 VT No. 50-0116
Universal Sport Style Front Fender is rolled on edge and
in front. The brackets are not included. Fender Trim
VT No. Type 50-1141 Raw 50-1050 50-1049
50-1055 50-0915
50-0133 Chrome (drilled) 50-1586 Rib, Raw
50-0195 Plain
50-1141 Model 48”
50-0690 Chrome Front Fender Tips is stamped or smooth. Fits fender
width as noted.
VT No. Style Width Models
50-1055 Eagle 4” XLX
Chrome Front Fender Tip fits stock front fenders, rear tail. 50-1050 Smooth 4” XLX
VT No. 50-0690 50-1049 Smooth 5” XL
50-0915 Eagle 5” XL
917
Steel Fender Kit Related Parts
50-0787 50-0787
50-0787A 1982-93 Fender
Installed 31-0472 Taillight Bracket 1982-03
31-0991 Taillight Bracket 2004-up
33-0306 Cateye Taillight
50-1097 1979-81 Chrome Struts
50-1093 1994-03 Chrome Strut Covers
All
Fenders
Are
Steel!
50-0178 50-0799 50-0866

EZ Bob Rear Fender Kit for Sportster models includes steel
fender and chrome taillight bracket which includes cateye Bobbed Rear Fender
33-0306 taillight. Order chrome struts and covers separately. mounts to stock strut bars.
VT No. Fits Fits1994-03 with mounting
50-0178 1979-81 holes.
50-0787 1982-93 50-0253 VT No. 50-0253
50-0799 1994-03
50-0481 1994-up When installing 04-up rear fenders on 2007-up models it will be
50-0866* 2007-up necessary to cut out opening to accommodate the ignition module.
*Note: Order taillight bracket and cateye taillight separately.
1952-78 50-0792 EZ Bob Rear Fender Kit
for 1952-78 Sportster model
33-0069 33-0070 includes a steel fender, cat-
eye taillight, chrome taillight,
bracket and chrome struts.
Order sissy bar components
separately.
Rear Fender Edge LED Lamp Kit fits 2004-up XL with
chopped rear fender.
VT No. Item
VT No. Color Fits
50-0792 1952-78 Fender Kit
33-0069 Red 2014-up
50-0929 Struts for Above
33-0070 Smoke 2014-up
31-9030 Tail lamp Bracket for Above
33-1599 Red 2004-13 50-0810
50-0813 Lo Boy Sissy Top Bar for Above
33-1598 Smoke 2004-13
50-0810 Side Straps
Bobbed Rear Fender for Rigid,
50-0151 7¹⁄₄” wide by 5¹⁄₂” deep raw finish
with right cutout, 50-0927 includes
50-0942 50-0471 50-0860 bracket to accept taillight plate.
50-1525
VT No. Item
FL Style Rear Fender fits 1982-up models must be drilled for 50-0151 Right
installation. 50-0927 Right, with bracket
VT No. Width
50-0942 6.5”
50-0471 7.5”
50-0860 8”
50-1525 9.0”
50-0470
50-0465
Ribbed Steel Bobber Fenders. Bolt on 5” wide with 1³⁄₄” wide
rib.
VT No. Year
50-0465 1986-03
50-0470 2004-up
918
XL-XLCH Replica Rear Fender
50-1068 50-0148
50-0149
50-0145
50-0146 50-0147
50-0187
50-0183,
50-0153
50-0184
50-0255 50-0725
XL
50-0722 50-0456
Steel Rear Fenders mount to stock struts.

VT No. OEM Years
50-1068* 59609-52 1952-78
50-0148 — 1959-72
50-0381 Replica 1959-72
50-0149 — 1952-78
50-0145 Flared 1952-78
50-0146 59611-73A 1973-78
50-0147 59674-79A 1979-81
50-0153 59674-81A 1982-93
50-0183 59674-94A 1994-96 50-1528 50-0457
50-0184 59756-97 1997-98
50-0187 59674-99 1999-03 VT No. 33-0301 (68008-73A) taillight.
50-0722* Undrilled 1982-03 50-0148 accepts 33-0300 early taillight
50-0725* Bobbed 1982-03 (68006-64).
50-0255 59847-04 2004-09 *Note: VT No. 50-1068 XLH and K Style
50-0456 59865-07 2004-09 1200N Only Rear Fender features full length style with
50-0457* Bobbed 2004-up rear flare, without tail light cut out, but
*Note: Holes must be drilled for mounting. includes internal reinforcement to mount
50-1528 Insert 2004-up 1955-72 type light, tombstone or beehive
50-1143 59865-10 2010-up 883N & 1200N light.
Note: VT No. 50-0146, 50-0147, 50-0153 accept 50-1143
When installing 04-up rear fenders on 2007-up XL 883N, XL 1200N models it will be necessary to cut out opening to accommodate the igni-
tion module on 50-0255, 50-0456.
Fender Extension Rubber Flap fits Chrome Rear Fender Bracket fits 1954-78. Reduces vibration between
1979-81. fender and frame, includes foam pad, replaces 59795-52A.
50-0912 Bracket with pad
28-2246 Foam pad only
919
Strut Set 50-1092
50-1035
50-0899 50-1082
50-1097 50-1093
50-0238
50-1228
Chrome XL Fender Strut Sets are of a die cast alloy

construction.
VT No. OEM Year Item 50-1188
50-1035 59950-89 1990-93 Set
59951-89
50-1142 — 1990-93 Set
50-0899 59950-81B 1982-89 Set
59951-81
50-1228 As Above with black inserts, 1982-89 Strut Covers for Sportsters fit over existing stock struts.
Set 33-0016 VT No. OEM Years Finish
50-1097 52754-79 1979-81 Set 50-1092 59243-95 1982-89 Chrome
52755-79 50-1082 59541-95 1990-93 Chrome
37-9084 Allen Bolt Set 1982-up Set 50-1188 1990-93 Black
33-0016 59259-90 1990-93 Reflector, Red 50-1093 59897-94 1994-03 Chrome
50-0238 59902-04 2004-up Chrome
59903-04
Fender Rail Bolt Kits attach struts to the rear fender.

Stock Acorn Allen Fits
8880-18 — 2529-6 1952-58 K and XLCH 50-1034
2626-18 — — 1952-58 XL (Cadmium)
8881-18 7207-8 — 1959-81
2665-18 — — 1959-81 (Cadmium)
— — 37-9050 1957-78
— — 37-9084 1982-03
— — 2274-10 2004-up 50-0908
Chrome Steel Fender Strut Sets available in smooth or stock

style with or without turn signal holes. 50-0904
Smooth Stock OEM Year Fits
50-0908 50-0904 59930-52B 1955-78 XL Without signals
— 50-1034 59934-73 1973-78 XL With signals
920
Chrome Front
51-1335 Engine Bar
51-1334 FOR ENGINE BARS LISTED ON THIS PAGE
WARNING: ENGINE/FRAME BARS MAY PROVIDE LIMITED LEG AND COSMETIC VEHICLE
PROTECTION UNDER UNIQUE CIRCUMSTANCES (FALL OVER WHILE STOPPED, VERY
LOW SPEED SLIDE). THEY ARE NOT MADE NOR INTENDED TO PROVIDE PROTECTION
FROM BODILY INJURY IN A COLLISION WITH AN AUTOMOBILE OR ANY OTHER OBJECT.
Engine Bars fit 2004-up XL,

2008-2013 XR. 51-0886
Chrome Black 1956-81
51-1334 51-1335 style
51-1334
Installed
Mega Footpeg Kit features

billet clamp set to attach to 51-0939
27-0587 1¹⁄₄” engine bars.
VT No. Item
27-0587 Footpeg Kit
27-0698 Bracket Set
51-0985
27-0660 Installed
Installed
XL
27-0654 27-1788
XLH-XLCH 1¹⁄₄” Diameter

Chrome Billet Engine Bar Footpeg Mount Kit fits on 1¹⁄₄” VT No. OEM Fits
front engine bars with male pegs. 51-0886 49042-56A 1956-81
VT No. Item 51-0888 With Pads 1986-03
27-0660 Kit 51-0939 49060-04 2004-up
27-0654 Chrome, Mounts Only 51-0985 W/Pads 2004-up
27-1788 Black, Mounts Only 1¹⁄₄” Bar Black
Chrome Footpeg Mount
Kits include clamp set and
extension bars to accept
male pegs.
27-0032 VT No. Size
27-0032 1”
27-0033 1¹⁄₈” Engine Bar features built in amber LED lights to work as turn
27-0034 1¹⁄₄” signals.
Chrome Black Fits
Bar Clamps fit 1¹⁄₄” engine bars 51-0021 51-0022 2004-up XL
to mount male footpeg sets.
VT No. 27-0892
Footpeg Mount Kit
allows male-type
pegs to be mount-
ed to 1¹⁄₄” diameter
engine bar.
VT No. 27-0651
921
Shock Stud Kit
54-0460
54-0509
54-0152
54-0448
54-0532
54-0153
54-0451
54-0450
Shock Stud Kits include all pieces for upper and lower posi-
tions. Including washers, nuts and lockwashers as necessary.
Studs and bolts are zinc plated. Outer nuts and washers are
chrome. 54-0124
VT No. Years 54-0514
VT No. Years
54-0460 1956-74 54-0450 1986-90 Chrome Upper Shock Stud Covers.
54-0448 1979-81 54-0451 1991-93 VT No. Years
54-0152 1965-74
Shock Stud Conversion 54-0153 1975-78
54-0403
Stud Kit updates 1954-74 to 54-0514 1982-90
late model bushing diameter 54-0509 1991-99
of ¹⁄₂”. Kit includes 4 studs, 54-0532 1990-03
4 nuts and 8 washers and 54-0124 2004-up
top covers. Use with VT No. 54-0417 2406-10
54-0106 with ¹⁄₂” holes. 2405-10
VT No. Item
54-0403 Kit
28-0231 Bushings
¹⁄₂” Inner Diameter
Zinc Plated Rear Shock Studs with cup washers. Each kit
Chrome Shock Covers are includes two (2) studs and four (4) chrome cup washers. Cup
a 1950’s style top cover. Fit washers and lock nuts may be purchased separately.
all models of swing arm with Upper Pair
stock shocks including 1952- Zinc Year
78 Sportster. Some seats may 54-0414 1956-74 54-0457
cause interference. 54-0417 1975-78
VT No. 54-0154 54-0455 1991-93 Note: Includes two studs.
Chrome Lower Shock Covers 54-0457 1994-up Note: Two studs only
give the Big Twin look on XL Lower Pair
models 1979-up with Showa — 54-0415 1956-74
shocks. Covers install easily with- — 54-0405 1975-78
out dismantling the shock. 54-0430 — 1982-91
VT No. 54-0206 Upper-Lower
2406-10 — 2000-03
16-0101 2405-10 — 2004-up
Shock Stud Washer 10 pack.
16-0409 16-0954
Shock Tool. VT No. Type Finish

VT No. Years 54-0418 ⁵⁄₈” Hole Cup Chrome
16-0101 1975-78 54-0419 ³⁄₈” Hole Cup Chrome
16-0409 1979-up 54-0420 ¹⁄₂” Hole Cup Chrome
16-0100 16-0100 1952-74 54-0421 ¹⁄₂” Hole x 1” Flat Chrome
16-0954 1979-up 54-0424 ⁵⁄₈” Hole x 1.3” Flat Zinc
54-0432 ³⁄₈” Hole x 1.25” Flat Zinc
Nyloc shock stud nut is ⁵⁄₈ -18, replaces 7993.
VT No. Finish Qty
54-0422 Zinc 10
54-0447 Chrome 4
922
All shocks are measured eyelet to center of eyelet.
Shock Set
AEE Series Chrome Shocks feature an adjustable spring pre-load nitrogen
charged with multi-stage automatic damping in a black body with chrome spring
and end caps. Note: When installing replacement shocks on 1978-00 XL models,
it may be necessary to modify or space the chain guard/belt guard to allow proper
shock clearance.
*Note: Denotes stock length shock. When installing other than stock length
shocks, tire to fender clearances must be checked.
Year Model 11” 11.5” 13 13.5” 14.25
1980-06 XLH 1200, 54-0020 54-0021 54-0023 54-0024* 54-0025
XLH 883 Hugger 54-0020 54-0021 54-0023 54-0024 54-0025
1988-03 XLH 883 54-0020 54-0021 54-0023 54-0024* 54-0025
1979-87 XLX-XLH-XLS 54-0020 54-0021 54-0023 54-0024 54-0025
54-0021
1954-78 XL — — — 54-0027 54-0025*
Shock Set
Progressive Suspension 412 Series Chrome Shocks are manufactured from the finest material
available. Magnum 412 Series shocks are nitrogen charged with six-stage automatic damping and an
adjustable spring preload. Available with chrome spring and end caps, shock cartridge is not chrome. All
shocks are measured eyelet to center of eyelet.
Note: When installing replacement shocks on 1978-00 XL models, it may be necessary to modify or
space the chain guard/belt guard to allow proper shock clearance.
*Note: Denotes stock length shock. When installing other than stock length shocks, tire to fender clear-
ances must be checked.
Year/Fits 11.0” 11.5” 12.5” 13.5” 14.5”
1988-03 XLH 1200 54-0093 54-0033 54-2000 — —
1988-03 XLH 883 Hugger 54-0093 54-0033 54-2000* — —
1988-03 XLH 883 54-0093 54-0033 54-2000 — —
1979-87 XLX-XLH-XLS 54-0093 54-0033 54-2000* — —
412 1953-78 XLH-XLCH — — — 54-2009 54-2003
Progressive Suspension 440
Series Chrome Shocks feature two
rebound damping circuits and are
Lowering Kit
XL
available in standard for the average
single rider, heavy duty for touring or
carrying passengers. Fit 1977-02.
Standard Heavy Size
54-4005 11.0”
54-4006 11.5”
54-4001 12.5”
54-4009 54-4003 13.5”
54-0523
440 54-0510
54-0128 54-0541
54-0128 54-0542
Installed
1” Rear Shock Lowering Kits.
VT. No. Fits Finish
54-0510
54-0510 1989-99 Black
54-0523 2000-03 Black
54-0511 1982-85 Black
54-0541 2000-03 Chrome
54-0542 1989-99 Chrome 54-0127
54-0127 2005-up Black
54-0128 2005-up Chrome
Warning: Installing a lowering kit or shorter shocks will decrease initial ground
clearance.The motorcycle will be lower to the ground and care should be taken
to avoid bottoming, especially over bumps or in turns.
923
Shock Set
54-0143 54-0516 54-0671
54-0106 54-0098 54-0099
Shock Sets for Sportster includes chrome springs.

VT No. OEM Length Fits
54-0106* 54490-78 14.5” 1975-78 XLH-XLCH
54-0099 54568-79B 13” L1979-81 XL-XLS
XLH-XLCH
54-0098 54568-82 12.5” 1982-87 XL-XLS-XLX
1988-90 XLH 883 Hugger
54-0503 54568-92 11.75” 1993-03 XLH 883 Hugger
54-0144 54568-04 13.38” 2004-08 XL 1200
*Note: Use 54-0403 stud kit for installation on 1952-74 models.
Shock Absorbers for Lowering Sportster
54-0191 VT No. OEM Length Fits
Installed 54-0098 54568-82 A 12.50” 88-90 XL 883 Std Deluxe XL 1200
54-0503 54568-92 B 11.75” 91-03 XL 883 Std Deluxe XL 1200
54-0143 54-0503 54568-92 A 11.75” 91 XL Hugger, Stock on
Installed 92-03 Hugger models
54-0516 54568-92 As Above, V-Twin
Note: (A) Lowers seat height 1” (B) Lowers seat height 2”.
54-0100 54-0101
54-0934
54-0192
Lowered Shocks!
Shorter Length Shocks lower the seat height by distance as
noted. Shocks feature chrome-plated springs and body caps
with suspension preload. 14” Replica Shock Sets for 1952-78 Sportster include bush-
VT No. Fits Finish Lowers Length ings with1/2” hole use with 54-0460 stud kit.
54-0143 1991-2005 XL 883 Chrome 1” 11.75” VT No. OEM Type
1991-2005 XL 1200 11.75” 54-0100 54504-73 Chrome Springs
1991-2005 XL 883DLX 11.75” 54-0101 54500-56A Full Covered
1992-2005 XL 883R 11.75” 54-0403 Mounting Kit for Above
54-0516 All XLS, 1991-03 Chrome 1” 11.75” 28-0220
54-0671 2006-2010 883 XL 11.75”
2009-up 1200 XL
54-0934 As Above Black 11.75”
24-2140 28-0231
54-0191 As Above Chrome 2¹⁄₄” 10.50”
54-0192 As Above Black 2¹⁄₄” 10.50” Shock Bushings.
Warning: Installing a lowering kit or shorter shocks will decrease initial ground VT No. Year
clearance. The motorcycle will be lower to the ground and care should be taken 28-0220 1954-73
to avoid bottoming, especially over bumps or in turns. 28-0231 1982-84
28-2140 1985-up
924
XL Tools
Crankshaft Locking Tool fits 1991-
1999 XL models by engaging the pinion
shaft splines. This allows removal and
torquing of the pinion nut during instal-
16-0158 Countershaft Support Plate
8862-1 lation.
VT No. 16-1055 Tool fits 1991-up 5-speed
Primary Plug Wrenches for Sportster models. Sportster.
VT No. OEM Years VT No. 16-1756
16-0158 1971-84 Drive Bearing Press Tool.
16-0985* 33186 1971-84 Transmission Door Puller
Tool. Fits 1957-90 XL and VT No. OEM Fits
8862-1 Evolution 1986-up 16-1767 37842 1991-up XL
8862-1T Evolution 1986-up 1952-56 K.
*Note: Uses 3/8 socket handle VT No. 16-0139
Jims Sportster Crankshaft Shaft Turning Tool fits spline on Motor Stand fits 1952-
Locking Tool. Use on Pinion assembled motor and allows engine to 03 XL
side of all 1991-up XL to keep be turned over by ½” ratchet or impact VT No. 16-0507
crankshaft assembly from rotating driver. Sifton unless noted. Fits1957-
during assembly on valve train up XL.
repair. VT No. 16-1852
VT No. Fits
16-1666 1991-2002 Main Bearing End Plug
16-1665 2003-up Tool allows the setting
Clutch Adjusting Gauges are of proper end play in Big
used to find the correct distance Twin Timken Bearing
between the outer drive plate and 16-1514 Assemblies by selec-
outer releasing disc for 1971-83 tion of proper spacer
Sportsters, 1936-67 early and 1968- from the catalog. Use when refitting bearings or
84 late Big Twins. Set of 3 tools Clutch Compression Tool fits 1990-up Big Twin and
bearing sets on late models when spacers are not
VT No. 16-1807 1991-up XL models.
included. Not needed for our VT No. 12-0309 or
VT No. 16-1514 12-0310 Timken sets, these are pre-spaced from
1990-up Big Twin the factory. Fits 1977-up XL’s.
Clutch Compressor VT No. 16-1796
Tool features access Ratchet Plate Riveting
windows to ease the Fixture securely aligns
removal and installa- plate to drum while set-
tion of snap ring, by ting rivets on 1971-79
16-1805
Jims. XL model clutch drum.
Motor Shop Cam Cover Bushing 16-1849 VT No. Fits VT No. 16-0165
16-1805 Big Twin
Service will install new bushings in cam
16-1849 Adapter to fit
cover for 1957-up XL models.
1991-up XL
VT No. 60-0131
Final Drive Tool fits

final drive pulley, so the
XL
16-0149 nut can be properly set
to torque specifications.
Fits XL.
Jims Sprocket Shaft Timken Bearing Installer Tool.
VT No. 16-0588
16-1837 As Above Jims
16-1760* 2.500 Long 1977-up XL
16-1761* 2.060 Long 1977-up XL Bushing Reaming
*Note: Sold separately for 1977-up use with 16-0149 Tools fit pinion
and 16-1837. bushing in cam
16-0127 16-0980 cover.
16-1857 Evolution XL Cam Relief Tool allows the installation
of high lift cams in 5-Speed XL models by removing
some of case material at the base of the lifter bores VT No. OEM Year Model
and around the pinion bearing for lobe swing clear- 16-0981 94812-37A 1954-76 XL & 45”
ance. This tool cuts clearance quickly and can be 16-0980 94812-80A 1977-85 Sportster
performed on an assembled engine in the frame. 16-0962 94812-89 1986-up Sportster
Cam Shaft Needle Bearing Installer. VT No. 16-0353 16-1791 — 1957-up Sportster
VT No. Jims OEM 1-3-4 Cam Cover Bushing
16-0046 Bearing Race Press
16-0127 16-1857 97273-60
Plug is used to 16-0125
16-0667 16-1883 Timken Bearing remove and install 16-0159
Removers remove Timken bearing outer
bearing from shaft race.
without removing VT No. Fits 16-0992
16-0045
shaft from fly- 16-0045 1957-76 XL
wheels. 16-0046 1977-up XL
16-0156
VT No. Fits Clutch Drum Locking Tools for removing clutch
16-0667 1957-76 hub and motor nuts.
16-1833 1977-up VT No. Year
16-1769 16-0125 1952-70
16-0159 1956-84
Clutch Compressor Tools allows disassembly of
16-0992 1971-84
clutch pack.
Note: VT No. Year
16-1769* 1991-up
Model
XL’s (Screw)
16-0059 Pinion Shaft Race Installer
fits 1977-E81 Sportster models.
For descriptive 16-0156 1971-84 XL’s

16-0059 1985-90 XL’s
*Note: Adapts 16-0967 to fit 1991-up XL.
Replaces 97080-77A.
VT No. 16-0965
purposes Sifton Pinion Gear Puller is used

for installation and removal of the
XL= For Sportster pinion gear. Fits 1957-76 XL.
VT No. 16-1060
925
Swingarm Bearing 44-0540 44-0714
44-0539 44-0709
44-0875
44-0872 44-0092
44-0538
44-0151 44-0091 12-0362

Swingarm Bearing Assembly Kit contains parts pictured.
VT No. Fits
44-0539 1952-73
44-0538 1974-81 12-0127 44-0626
12-0360

V Twin

Uploaded by

Copyright:

Available Formats

V Twin

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

V Twin

Uploaded by

Copyright:

Available Formats

V-TWIN PRODUCT GROUPS

1. Touring FLT, FLHT, FLHR

4. Sportster XL, XLH, XLS, XLCH

Index for Touring

Black Saddlebag Bottom Set

3” Stretched Saddlebag Kit.

Stretched Saddlebag Bottom Set

Black Replica Saddlebags

Saddlebag Latch Rivet Tool

Chrome Saddlebag Support Set

50-1205 Installed 50-1205

42-1130 42-1111 42-1128 42-1127 42-1098

42-1129 42-1131 42-1163 42-0176 42-1099

42-1097 49-0883 42-0365

49-1011 49-1012 33-0221

Tour-Pak Rear Taillamp

VT No. Item Fits

Note: Racks are designed for loads of 10 pounds or less!

31-1304 50-1512 31-1315

Contour Fender Racks

49-0304 Installed 49-0832 Installed

Old Style Luggage Rack

Pillow Passenger Pad

Sissy Bar Pads Black Tapered Backrest Pad

Sissy Bar Straps and Backs

Chrome Seat Handrails

Solo Seat Mount Kits

Tie Down Bracket Kit

Chrome Tie Down Brackets

Fairing Edge Light Kit

42-9960 42-9995 42-9997

Chrome Lower Fairing Trim

Dark Smoke Fairing Deflector Set 49-0737

Instrument Gauge Bezel Cover

Road Glide Split Windshield Trim

Fairing Support Kit

Chrome Windshield Bracket Kit

Chrome Windshield Bracket Kit

12” Wind Splitter Windshield

National Cycle FLHR Replacement Polycar-

51-0400 51-0401 51-0404

V-Stream Series Windshields

National Cycle Wave Windsreens offer riders a

Chrome Primary Cover Screw Kits

Starter Motor End Cover

Jims Flywheel Locking and Decommissioned Tool locks the

Chrome Outer Primary Cover Only

Chrome Outer Primary Cover Kits

42-0036 42-0108 42-0991 42-6070 42-0579 42-0107

42-9944 42-0747 42-0470 42-0471 42-1073 42-1086 42-1087

42-1118 42-1090 42-0605 42-9965 42-0102 42-1145 42-0124

42-1387 42-1388 42-1376 42-1144 42-0632 42-0558 42-0091

42-0580 42-0578 42-0975 42-6026 42-0120 42-0481

42-7104 42-7102 42-0195 42-1373 42-1543

42-0222 42-0223 42-0224 42-0225

42-0226 42-1376 42-1377

42-6055 42-0474 42-0475

42-1195 42-1166 42-1145 42-1546

11-9980 11-9665 11-1090 Installed