Global Marketing for Tube & Pipe www.TubeSolution.

com

JIS G3446 Stainless steel pipes for machine and structural purposes

1. Scope
This Japanese Industrial Standard specifies the stainless steel pie (hereafter referred to as "pipes") used for machinery, automobiles, bicycles, furniture, apparatus, other
mechanical parts and structures.

2. The standards cited in this Standard are shown in Attached Table 1.

6. Sectional Shape and Dimensions of Pipe and Section

6.1 Sectional Shape and Dimensions of Circular Type 1
6.1.1 The dimensions of the circular type 1 pipe shall be as given in Table 4.
Table 4 Dimensions of Circular Type 1 Pipe Unit: mm
Nominal dia. Plate thickness t
Symbol
D 1.6 2.0 2.7 3.2 4.0

400 O O O O O

600 O O O O O

800 O O O O O

1000 O O O O O

SCP 1R 1200 O O O O O

1350 O O O O O

1500 O O O O O

1650 O O O O O

1800 O O O O O

Remark
The plate thickness indicates the thickness of the original plate before plating.
6.1.2 The sectional shape and dimensions of the circular type 1 section shall be as given in Table 5.

Table 5 Sectional Shape and Dimensions of Circular Type 1 Section Unit: mm

Global Marketing for Tube & Pipe www.TubeSolution.com

Dimensions

Symbol Corrugation pitch Corrugation height Bend radius of Effective length Flange length Hole position in Lap allowance in axial

P H corrugation r L f axial direction g direction l

612
SCP 1R 68.0 13.0 17.5 55 25 19
1020

6.1.3 The number of bolt holes of the circular type 1 section shall be as given in Table 6.
Table 6 Number of Bolt Holes of Circular Type 1 Section
Number of bolt, holes Help potch in
Nominal diameter of
Circumferential direction circumferential direction
section D Axial direction
(both sides) mm

400 None -

600 None -

800 None -

1000 None -

1200 1 per pitch of corrugation 8 500

1350 8 500

1500 10 500

1650 10 500

1800 10 500

6.2 Sectional Shape and Dimensions of Circular Type 1 S

6.2.1 The sectional shape and dimensions of the circular type 1 S pipe shall be as given in Tables 7 and 8.
Table 7 Dimensions of Circular Type 1 S Pipe Unit: mm
Nominal dis. Plate thickness t Length
Symbol
D 1.6 2.0 2.7 3.2 L

SCP 1RS 300 O O - - Specified length

400 O O - - from 4000 to

Global Marketing for Tube & Pipe www.TubeSolution.com

450 O O - - 6000 incl.

600 O O O -

800 O O O -

1000 O O O O

1200 O O O O

1350 O O O O

1500 O O O O

1650 O O O O

1800 O O O O

Remark
The plate thickness indicates the thickness of the original plate before plating.
Table 8 Sectional Shape and Dimensions of Circular 1 S Pipe Unit: mm
Dimensions

Symbol Corrugation pitch Corrugation height

Bend radius of corrugation r
P H

SCP 1RS 68.0 13.0 17.5

6.2.2 The sectional shape and dimensions of the coupling band to be used for the circular type 1 S pipe shall be as given in Table 9.
Table 9 Sectional Shape and Dimensions of Coupling Band Used for Circular Type 1 S Pipe Unit: mm
Symbol Plate thickness and width of band Nominal dia. of pipe D 300 400 450 600 800 1000 1200 1350 1500 1650 1800

Plate thickness t 1.6 -

D-1
Width W 270 -

Plate thickness t - 2.0 2.7

D-2
Width W - 410 410

Plate thickness t 1.6,2.0 1.6,2.0,2.7 1.6,2.0,2.7,3.2

S-1
Width W 410 410 410

S-2 Plate thickness t - 3.2

Global Marketing for Tube & Pipe www.TubeSolution.com

Width W - 410

6.3 Sectional Shape and Dimensions of Circular Type 2

6.3.1 The dimensions of the circular type 2 shall be as given in Table 10.
Table 10 Dimensions of Circular Type 2 Pipe and Number of Sections Forming Pipe Unit: mm
Plate thickness Plate thickness t Number of sections forming pipe (example)
Symbol
D 2.7 3.2 4.0 4.5 5.3 6.0 7.0 9pitches 6pitches 3pitches

1500 O O O O O O O - 2 2

1750 O O O O O O O - 3 1

2000 O O O O O O O - 4 -

2500 O O O O O O O 2 2 -

3000 O O O O O O O 4 - -

3500 O O O O O O O 2 4 -

4000 O O O O O O O 4 2 -

4500 O O O O O O O 6 - -

5000 O O O O O O O 4 4 -
SCP
6000 O O O O O O O 8 - -
2R
7000 O O O O O O O 8 2 -

8000 O O O O O O O 8 4 -

9000 O O O O O O O 12 - -

10000 O O O O O O O 12 2 -

11000 O O O O O O O 12 4 -

12000 O O O O O O O 16 - -

13000 O O O O O O O 16 2 -

14000 O O O O O O O 16 4 -

15000 O O O O O O O 20 - -

Remark
Global Marketing for Tube & Pipe www.TubeSolution.com

The plate thickness indicates the thickness of the original plate before plating.
6.3.2 The sectional shape and dimensions of the circular type 2 section shall be as given in Table 11.
Table 11 Sectional Shape and Dimensions of Circular Type 2 Section Unit:mm
Dimensions

Symbol Corrugation pitch Corrugation height Bend radius of Effective length Lap allowance in axial Lap allowance in circumferential direction

P H corrugation r L direction l g1 g2

150.0 48.0 28.0 450

600

750
SPC 2R 50 35 50
150.0 50.0 28.0 900

1050

1200

Remarks

1. O mark indicates the positions of bolt holes. However, ≤ mark indicates the position of bolr holes to be provided in addition when the plate thickness is 6.0mm or 7.0mm.

2. The distances g1 and g2 and the distance between holes (262 mm) in the circumferential direction shall be the dimension before corrugation.
3. Number n shall be 3, 6 and 9 and referred to as 3 pitches, 6 pitches and 9 pitches.
4. Dimension a (length of chord) and dimension b (effective circumference) shall be calculated from the following formula.
where r1 shall be as follows
Circular type: D/2
Elongation type: r1 , r2, r3
Pipe arch type: r1, r2, r3
Arch type: rs
6.3.3 The number of bolt holes of the circular type 2 section shall be as given in Table 12.
Table 12 Number of Bolt Holes of Circular Type 2 Section
Plate thickness of section t Number of bolt holes

mm Axial direction Circumferential direction

5.3 max. Not less than 2 per corrugation pitch 1 per 262 mm

6.0 min. Not less than 3 per corrugation pitch 1 per 262 mm
Global Marketing for Tube & Pipe www.TubeSolution.com

6.4 Sectional Shape and Dimensions of Circular Types 3 S

6.4.1 The sectional shape and the dimensions of the circular type 3 S pipe shall be as given in Tables 13 and 14.
Table 13 Dimensions of Circular Type 3 S Pipe
Nominal dia. Plate thickness t Length
Symbol
D 1.6 2.0 2.7 3.2 L

900 O O O O

1000 O O O O

1200 O O O O

1350 O O O O
Specified length
1500 O O O O
SCP 3RS from 4000 to 6000
1650 O O O O
inch.
1800 O O O O

2000 O O O O

2200 O O O O

2400 O O O O

Remark
The plate thickness indicates the thickness of the original plate before plating.
Table 14 Sectional Shape and Dimensions of Circular Type 3 S Pipe Unit: mm
Dimensions

Symbol Corrugation pitch Corrugation height Bend radius of corrugation

P H r

SCP 3RS 76.2 25.4 17.5

6.4.2 The sectional shape and dimensions of the coupling band to be used for the circular type 3 S pipe shall be as given in Table 15.
Table 15 Sectional Shape and Dimensions of Coupling Band to Be Used for Circular Type 3 S Pipe Unit: mm
Symbol Plate thickness and width of band Nominal dia. of pipe D 900 1000 1200 1350 1500 1650 1800 2000 2200 2400

plate thickness t 1.6, 2.0, 2.7, 3.2 -

S-3
Width W 460 -
Global Marketing for Tube & Pipe www.TubeSolution.com

plate thickness t - 3.2

S-4
Width W - 460

6.5 Sectional Shape and Dimensions of Elongation Type

6.5.1 The dimensions of the elongation type shall be as given in Table 16. However, the sectional shape and dimensions of the section and the number of holes of the section shall
be as given in Tables 11 and 12.
Table 16 Dimensions of Elongation Type and Number of Sections Forming Pipe Unit: mm
Radius Plate thickness t Number of sections forming pipe (example)
Nominal dia. Span Rise
Symbol 9pitches 6pitches 3pitches
D S R r1 r2 r3 2.7 3.2 4.0 4.5 5.3 6.0 7.0
r1 r2 r3 r1 r2 r3 r1 r2 r3

1500 1405 1575 680 947 680 O O O O O O O - - - 1 - 1 - 2 -

1750 1668 1839 705 979 804 O O O O O O O - - - - 2 1 1 - -

2000 1898 2100 892 1140 892 O O O O O O O - - - 1 2 1 - - -

SCP 2500 2317 2625 1092 1385 1092 O O O O O O O - 2 - 1 - 1 - - -

2E 3000 2846 3150 1338 1710 1338 O O O O O O O 1 2 1 - - - - - -

3500 3333 3675 1540 1953 1540 O O O O O O O 1 - 1 - 4 - - - -

4000 3844 4200 1645 2157 1645 O O O O O O O - 4 - 1 - 1 - - -

4500 4305 4725 1925 2460 1925 O O O O O O O 1 4 1 - - - - - -

Remark
The plate thickness indicates the thickness of the original plate before plating.
6.6 Sectional Shape and Dimensions of Pipe Arch Type
6.6.1 The dimensions of the pipe arch type shall be as given in Table 17. However, the sectional shape and dimensions of the section and the number of bolt holes of the section
shall be as given in Table 11 and 12.
Table 17 Dimensions of Pipe Arch Type and Number of Sections Forming Pipe Unit: mm
Radius Plate thickness t Number of sections forming pipe (example)
Nominal dia. Span Rise Bottom depth
Symbol 9pitches 6pitches 3pitches
D S R B C r1 r2 r3 2.7 3.2 4.0 4.5 5.3 6.0 7.0
r1 r2 r3 r1 r2 r3 r1 r2 r3

SCP 2P 1500 1500 810 662 947 1057 1446 530 O O O O O O O 1 - - - 1 - - - 2

Global Marketing for Tube & Pipe www.TubeSolution.com

2000 2000 1060 624 1231 1160 2588 530 O O O O O O O - - - 2 1 - - - 2

2500 2500 1310 777 1641 1463 2018 530 O O O O O O O - 1 - 2 - - - - 2

3000 3000 1560 711 1917 1529 3157 530 O O O O O O O 1 1 - 1 - - - - 2

3500 3500 1810 813 2611 1914 3684 530 O O O O O O O 2 - - - 2 - - - 2

4000 4000 2060 925 3309 2312 4191 530 O O O O O O O 1 1 - 2 1 - - - 2

4500 4500 2310 1045 4009 2720 4688 530 O O O O O O O 2 2 - 1 - - - - 2

5000 5000 2560 1171 4710 3138 5176 530 O O O O O O O 3 1 - - 2 - - - 2

Remark
The plate thickness indicates the thickness of the original plate before plating.
6.7 Sectional Shape and Dimensions of Arch Type
6.7.1 The dimensions of the arch type shall be as given in Table 18. However, the sectional shape and dimensions of the section and the number of bolt holes of the section shall
be as given in Tables 11 and 12.
Table 18 Dimensions of Arch Type and Number of Sections Forming Pipe
Nominal dia. Span Rise Plate thickness t Number of sections forming arch (example)
Symbol
D S R 2.7 3.2 4.0 4.5 5.3 6.0 7.0 9pitches 6pitches 3pitches

SCP 2P 1500 1500 810 O O O O O O O - 1 1

2000 2000 1060 O O O O O O O - 2 -

2500 2500 1310 O O O O O O O 1 1 -

3000 3000 1560 O O O O O O O - 3 -

3500 3500 1810 O O O O O O O 1 2 -

4000 4000 2060 O O O O O O O 2 1 -

4500 4500 2310 O O O O O O O 3 - -

5000 5000 2560 O O O O O O O 2 2 -

5500 5500 2810 O O O O O O O 3 1 -

6000 6000 3060 O O O O O O O 2 3 -

6500 6500 3310 O O O O O O O 3 2 -

Global Marketing for Tube & Pipe www.TubeSolution.com

7000 7000 3560 O O O O O O O 4 1 -

Remark
The plate thickness indicates the thickness of the original plate before plating
World Standard Comparative Table
KS ASTM JIS DIN BS

NUMBER GRADE NUMBER GRADE NUMBER GRADE NUMBER GRADE NUMBER GRADE

17455
STS430TKA A511 MT430 SUS430TKA X6Cr 17 - -
17456

STS430TKC A511 MT430 SUS430TKC - - - -

17455 X5Cr
STS304TKA A511 MT304 SUS304TKA 3014 Gr 1
17456 Ni 1810

STS304TKB - - SUS304TKB - - - -

STS304TKC A511 MT304 SUS304TKC - - - -

17455 X5Cr Ni
STS304TKA A511 MT316 SUS316TKA 3014 Gr 6
17456 Mo17122

STS304TKB - - SUS316TKB - - - -

STS316TKC A511 MT316 SUS316TKC - - - -

D 3536 G3446
17455 X6Cr Ni
STS321TKA A511 MT321 SUS321TKA 6323 LW 18
17456 Ti 1810

STS321TKB - - SUS321TKB - - - -

17455 X6Cr Ni
STS347TKA A511 MT347 SUS347TKA - -
17456 Nb1810

STS347TKB - - SUS347TKB - - - -

STS410TKA A511 MT410 SUS410TKA 17456 X10Cr 13 - -

STS410TKB - - SUS410TKB - - - -

STS410TKC A511 MT410 SUS410TKC - - - -

STS420J1TKA - - SUS420J1TKA - - - -

STS420J2TKA - - SUS420J2TKA - - - -
Global Marketing for Tube & Pipe www.TubeSolution.com

MT302

MT303Se

MT304L

MT305L

MT309S

MT310S

MT316L

MT317

MT403

MT410

MT414

MT416Se

MT431

MT440A

MT405

MT443

MT446-1

MT446-2

29-4

29-4-2

3. Grade and symbol

Pipes shall be classified into 12 grades, and their symbols shall be as given in Table 1.

4. Method of manufacture

5. Chemical composition

6. Mechanical properties
Global Marketing for Tube & Pipe www.TubeSolution.com

7. Tolerances on dimensions
7.1 The dimensional tolerances on the circular type 1, circular type 2, elongation type, pipe arch type and arch type sections shall be as given in Table 19.
Table 19 Dimensional Tolerances on Circular Type 1, Circular Type 2, Elongation Type, Pipe Arch Type and Arch Type Sections

8. Appearance
The appearance shall be as follows.
a)The pipes shall be practically straight, and their two ends shall be at right angles to the axis of the pipes.
b) The pies shall be free from defects detrimental to practical use.
c) When particularly requested by the purchaser, the surface finishing of pipes shall be subjected to the agreement between the purchaser and supplier.

9. Tests

10. Inspection
10.1 Inspection
The inspection shall be as follows
1) General matters for inspection shall be as specified in JIS G 0303.
2) The chemical composition shall conform to the requirements specified in 4.
3) The mechanical properties shall conform to the requirements specified din 5.
4) The dimensions shall conform to the requirements specified in 6.
5) The appearance shall conform to the requirements specified in 7.
6) The purchaser may specify a flaring test, a hydraulic test, etc. is addition to the inspection items specified in (2) to (5). In this acceptance criteria shall previously be agreed
upon between the purchaser and supplier.
10.2 Reinspection
The pie may be retested in accordance with 4.4 of JIS G 0303.

11.Marking
Each pipe having passed the inspection shall be legibly marked with the following items. The order of arranging the items is not specified, In this case of small pipes or with a
request from the purchaser, however, pies may be bundled and be marked for each bundle by a suitable means.
Further, when approved by the purchaser, a part of the items may be omitted.
(1) Symbol of grade
Global Marketing for Tube & Pipe www.TubeSolution.com

(2) Symbol expressing the method of manufacture (²)

(3) Dimensions (³)
(4) Manufacturer's name or abbreviation
Note (²)
Symbols expressing the method of manufacture shall be as follows.
However, the sign of das may be replaced by a space.
Hot finished seamless steel pie: -S-H
Cold finished seamless steel pipe: -S-C
Automatic arc-welded steel pipe: -A
Cold finished automatic arc-welded steel pie: -A-C
Weld zone working finished automatic arc-welded steel pipe: -A-B
Laser-welded steel pipe: -L
Cold finished laser-welded steel pipe: -L-B
Electric resistance welded pipe other than hot finished and cold finished steel pipes: -E-G
Cold finished electric resistance-welded steel pipe: -E-C
(³) As to the dimensions, indicate the outside diameter and thickness.

12. Report
The manufacturer shall, as a rule, submit to the purchaser a report on the test result, method of manufacture, ordered dimensions, quantity, work lot number traceable to the
manufacturing conditions and the like.

JIS Number and Corresponding Foreign Standards

JIS ASTM BS DIN NF ISO
Index
Standard Standard Standard Standard Standard Standard
Grade Type Grade Type Grade Type Grade Type Grade Type Grade Type Number
Number Number Number Number Number Number

G3446 SUS A511 MT304 SUS 6323 LW13 SUS A49-647 TSZ8C17 SUS C019

304TKA SUS A554 MT304 SUS " LWCF131 SUS

SUS " LW15 SUS

304TKC SUS " LWCF15 SUS

Global Marketing for Tube & Pipe www.TubeSolution.com

SUS A511 MT316 SUS 6323 LW17 SUS

316TKA SUS A554 MT316 SUS " LWCF17 SUS

SUS

316TKC SUS

SUS A511 MT321 SUS 6323 LW18 SUS

321TKA SUS A554 MT321 SUS " LWCF18 SUS

SUS A511 MR347 SUS

347TKA SUS A544 MT347 SUS

SUS A511 MT430 SUS

430TKA SUS A554 MT430 SUS

SUS

430TKC SUS

SUS A511 MT410 SUS

410TKA SUS

SUS

410TKC SUS

SUS

420J1TKA SUS

SUS

420J2TKA SUS

STKR41 C A500 GrB C 6363 34/26 C A49-652 TA37a C C020

STKR C " 43*36 C

" 50/45 C