Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 16 views

    Astm A490 V02

    Uploaded by

    Fa Ch

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Astm A490 V02

    Uploaded by

    Fa Ch
    16 views1 page

    Original Title

    ASTM-A490-V02

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    16 views1 page

    Astm A490 V02

    Uploaded by

    Fa Ch

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    ASTM A490

    Scope - This specification covers quenched and tempered, alloy steel, heavy hex structural bolts from 1/2” to 1-1/2” diameter
    with a minimum 150 ksi tensile. These bolts are intended for use in structural connections and therefore have shorter thread
    lengths than standard hex bolts. This spec is similar to but stronger than ASTM A325 being that A490 is made from alloy
    steel rather than a medium carbon steel.

    TYPE 1 Medium carbon and alloy steel


    Grades
    TYPE 3 Weathering steel

    Markings Size Tensile, ksi Yield, ksi Elong. % RA % Hardness


    Mechanical
    Properties Type 1 Type 3
    1/2 to 1-1/2 150-173 130 min 14 min 40 min C33-C38
    A490 A490

    Type 1 Bolts
    Element Sizes 1/2 to 1-3/8 Size 1-1/2
    Carbon 0.30 - 0.48 0.35 - 0.53
    Phosphorus, max 0.04 0.04
    Sulfur, max 0.04 0.04
    Type 3 Bolts
    Element Sizes 1/2 to 3/4 Size above 3/4
    Chemical
    Carbon 0.20 - 0.53 0.30 - 0.53
    Properties
    Manganese, min 0.4 0.4
    Phosphorus, max 0.035 0.035
    Sulfur, max 0.04 0.04
    Copper 0.20 - 0.60 0.20 - 0.60
    Chromium, min 0.45 0.45
    Nickel, min 0.2 0.2
    Molybdenum, min 0.15 0.15

    Recommended Nuts Washers


    Mating Type 1 Type 3 Type 1 Type 3
    Materials A563DH & A194 2H A563DH3 & A194 2H F436-1 F436-3

    Notes – A490 bolts shall not be coated via hot-dip zinc coating, mechanical deposition, or electroplating with zinc due to the
    potential for hydrogen embrittlement. A zinc/alum coating (dacromet) per ASTM F1136 Grade 3 has been approved for A490
    bolts. Also, A490 material isrequired to be magnetic particle inspected.

    800-642-0921 or visit us at southernfasteners.com

    You might also like