5/24/2011 HDPE Pipe Dimensions and Pressure R…

The follow ing table show s dimension and maximum continues operating pressure for HDPE
pipes based on PE100 material and water service temperature at 20°.

Dimension
SDR51 SDR41 SDR33 SDR26 SDR21 SDR17.6
Ratio
Pressure PN3.2 PN4 PN5 PN6.4 PN8 PN9.6
(bar)
Outside Minimum Wall Minimum Minimum Minimum Minimum Minimum
Diameter Thickness Wall Wall Wall Wall Wall
(mm) (mm) Thickness Thickness Thickness Thickness Thickness
(mm) (mm) (mm) (mm) (mm)
20 - - - - - -
25 - - - - - -
32 - - - - - 1.8
40 - - - 1.8 1.9 2.3
50 - - 1.8 2.0 2.4 2.9
63 - 1.8 2.0 2.5 3.0 3.6
75 1.5 1.9 2.3 2.9 3.6 4.3
90 1.8 2.2 2.8 3.5 4.3 5.1
110 2.2 2.7 3.4 4.2 5.3 6.3
125 2.5 3.1 3.9 4.8 6.0 7.1
140 2.8 3.5 4.3 5.4 6.7 8.0
160 3.2 4.0 4.9 6.2 7.7 9.1
180 3.6 4.4 5.5 6.9 8.6 10.2
200 3.9 4.9 6.2 7.7 9.6 11.4
225 4.4 5.5 6.9 8.6 10.8 12.8
250 4.9 6.2 7.7 9.6 11.9 14.2
280 5.5 6.9 8.6 10.7 13.4 15.9
315 6.2 7.7 9.7 12.1 15.0 17.9
355 7 8.7 10.9 13.6 16.9 20.1
400 7.9 9.8 12.3 15.3 19.1 22.7
450 8.8 11.0 13.8 17.2 21.5 25.5
500 9.8 12.3 15.3 19.1 23.9 28.4
560 11 13.7 17.2 21.4 26.7 31.7
630 12.3 15.4 19.3 24.1 30.0 35.7
710 13.9 17.4 21.8 27.2 33.9 40.2
800 15.7 19.6 24.5 30.6 38.1 45.3
900 17.6 22.0 27.6 34.4 42.9 51.0
1000 19.8 24.5 30.6 38.2 47.7 56.7
1200 23.5 29.4 36.7 46.9 57.2 68.0
1400 34.3 42.9 53.5 66.7 79.2

1600 31.4 39.2 49.00 61.2 76.2 90.6

Dimension
SDR17 SDR11 SDR9 SDR7.4 SDR6 SDR5
Ratio
Pressure PN10 PN16 PN20 PN25 PN32 PN40
(bar)
Outside Minimum Wall Minimum Minimum Minimum Minimum Minimum
Diameter Thickness Wall Wall Wall Wall Wall
(mm) (mm) Thickness Thickness Thickness Thickness Thickness
(mm) (mm) (mm) (mm) (mm)
20 - 1.9 2.3 2.8 3.4 4.1
25 1.8 2.3 2.8 3.5 4.2 5.1
32 1.9 2.9 3.6 4.4 5.4 6.5
40 2.4 3.7 4.5 5.5 6.7 8.1
50 3.0 4.6 5.6 6.9 8.3 10.1
63 3.8 5.8 7.1 8.6 10.5 12.7
75 4.5 6.8 8.4 10.3 12.5 15.1
90 5.4 8.2 10.1 12.3 15.0 18.1
110 6.6 10.0 12.3 15.1 18.3 22.1
125 7.4 11.4 14.0 17.1 20.8 25.1
140 83 12 7 15 7 19 2 23 3 28 1
pespipe.com/hdpe-pipes/Dimension.htm 1/2
5/24/2011 HDPE Pipe Dimensions and Pressure R…
140 8.3 12.7 15.7 19.2 23.3 28.1
160 9.5 14.6 17.9 21.9 26.6 32.1
180 10.7 16.4 20.1 24.5 29.9 36.1
200 11.9 18.2 22.4 27.4 33.2 40.1
225 13.4 20.5 25.2 30.8 37.4 45.1
250 14.8 22.7 27.9 34.2 41.6 50.1
280 16.6 25.4 31.3 38.3 46.5 56.2
315 18.7 28.6 35.2 43.1 52.3 63.2
355 21.1 32.2 39.7 48.5 59.0 -
400 23.7 36.3 44.7 54.7 66.5 -
450 26.7 40.9 50.3 61.5 - -
500 29.7 45.4 55.8 68.3 - -
560 33.2 50.8 62.5 - - -
630 37.4 57.2 - - - -
710 42.1 64.5 - - - -
800 47.4 72.7 - - - -
900 53.3 81.8 - - - -
1000 59.3 90.9 - - - -
1200 70.6 - - - - -
1400 82.4 - - - - -
1600 94.1 - - - - -

Pipe dimensions are in accordance with EN12201-2 and DIN 8074

Pipes are designed according to equation ISO 161 and considering safety coefficient
C=1.25 and MRS=10 Mpa for PE100
The non-listed dimensions and PR classes may be available upon special request

© 2009 P.E.S C o. All rights re serve d.

Site m a p | P rivacy P olicy | Disclaim er

Vancouver W e b Design by Gra phica lly Spe ak ing

pespipe.com/hdpe-pipes/Dimension.htm 2/2