TAIP

AI-POWERED TAPE EMULATION

MANUAL
 INTRODUCTION TAIP

MEET TAIP
Tape recordings have a musical quality that digital tracks often lack. TAIP
brings you closer to that holy grail. It will add some authentic analog heat to
your mixes, without the need to route any audio outside the box.

Tape plugins are not a new concept. However, our emulation method is. Instead
of using traditional DSP, we've developed TAIP around an AI algorithm designed
to decipher the invisible nuances of complex analog circuits.

The result is a unique, truly faithful, tape emulation – with some new features
to accomodate a modern workflow. Use TAIP to add a touch of warmth and
glue, or ‘drive it like you hate it’ as an alternative to your distortion plugins.

HIGHLIGHTS
* AI-powered algorithm, giving you the true behavior of analog tape

* Flexible feature set, allowing you to create your own ‘tape flavor’ for any need

* Use TAIP to add heat and glue to drums, instruments, vocals and beyond

* Read more about our AI emulation approach on the next page

 IN USE TAIP MANUAL

FEATURES
* DRIVE: Traditionally, tape machines were designed to color the sound as little as possible.
TAIP is not. You can use the DRIVE knob to add just as much color as you need - from a subtle
touch of heat to heavy distortion.

* MIX: Lets you run your tape in parallel. If WEAR is engaged, you can use MIX to get a classic
'tape flanging' effect. This is caused by the wow and flutter of WEAR running in parallel with
the dry track when MIX is below 100.
PUTTING THE 'AI' IN TAIP
* MODEL: While SINGLE is a regular tape emulation, DUAL creates a series of two tape
‘AI’ is an overused - and often misused - term. But we believe it’s the future of music emulations chained together under the hood, each applying half of the DRIVE value. This will
technology. It just needs to be used genuinely and with a legitimate purpose. add slightly more weight to your signal.

For a hardware emulation project like TAIP, AI offers an alternative - and in our opinion * LO-SHAPE / HI-SHAPE: These sliders let you saturate the low/high end more or less than the
more faithful - approach over the traditional DSP method. Where a normal DSP emulation rest of the frequency spectrum. (Example: you want to warm up a drum buss without adding
would entail ‘guesstimating’ the effect of various analog components and their mutual too much distortion to the low frequencies).
dependencies, we can use AI / neural networks to accurately decipher the sonic qualities
that make a tape machine sound and behave in the way it does. This happens by feeding an * GLUE: Tape machines are known to introduce a pleasing compression-like effect due to
algorithm various training data of dry vs. processed audio and working with it to identify the their low dynamic range. TAIP lets you add this effect – or even exaggerate it. Use GLUE for
exact characteristics that make up the difference. Once these differences have been learned subtle cohesion or as an actual compressor.
by the AI, we can apply them to new audio.
* NOISE: Lets you add tape noise to taste – or avoid it altogether.
This process may sound overly digital for a plugin that brings an analog sound. But the
reality is that ‘analog’ and ‘digital’ are two fundamentally different domains, and to get a * WEAR: Combines wow, flutter and an altered frequency response curve to emulate a

computer to behave (or sound!) in a certain way, it helps to think like it does. Re-creating malfunctioning tape machine.

an ‘analog-style’ signal path in DSP is thinking about the problem like a human. The AI
* PRESENCE: Part of the tape warmth comes from an attenuated high-end. PRESENCE allows
approach helps us solve the problem like a machine would – for a more faithful emulation.
you to decide how much of that attenuation you want. It can bring back the sharpness and

TAIP is our attempt at creating the ideal ‘Tape Machine’ for the DAW-era, combining a brightness that is sometimes lost on tape.

vintage sound with a modern feature set. Its parameters will let you customize the right tape
* INPUT: Choose between NORMAL or HOT (more distorted) input levels without affecting
flavor for almost any need.
the output volume.

* AUTO GAIN: Allows you to add more DRIVE while keeping a consistent plugin output level.
 PRESETS TAIP

PRESET CREATORS:
TAIP comes loaded with 135 presets created by BABY Audio and some friends of the house.
We want to give a special thanks to all preset creators for their contribution.

Presets 001-018: Created by BABY Audio

Presets 019-021: Created by Mark Needham
Presets 022-028: Created by Eestbound
Presets 029-031: Created by Eric J Dubowsky
Presets 032-037: Created by Cesar Sogbe
Presets 038-041: Created by Neenah
Presets 042-048: Created by Maximilian Jaeger
Presets 049-050: Created by Preston Reid
Presets 051-054: Created by John Nathaniel
Presets 055-057: Created by Dacota G
Presets 058-062: Created by Richie Beretta
Preset 063: Created by Ah Kosmos
Presets 064-075: Created by Rob Kleiner
Presets 076-078: Created by Anthony Saffery
Presets 079-088: Created by Skyler Gibbons
Presets 089-091: Created by Sam Sherbin
Presets 092-098: Created by Zardonic
Presets 099-118: Created by Venush Theory
Presets 119-125: Created by Eryck Bry
Presets 126-129: Created by Van Boied
Presets 130-135: Created by CJ Beatz
 INSTALLATION TAIP

COMPATIBILIY ACTIVATION
Plugin formats: VST, VST3, AU, AAX. Activate your software by entering the serial key that was emailed to you when you
bought the product. Serial keys are entered in the ‘trial mode’ open screen.
Platforms supported: Mac OS 10.7 and up including Catalina, Big Sur and If you have any problems activating, please email support@babyaud.io
Native Mac M1 compatibility. PC Windows 7 and up.

DAWs supported: Ableton Live, Pro Tools, Logic Pro, FL Studio, Cubase, Nuendo, TRIAL VERSION
Reaper, Reason and any other major DAW software on the market.

The Spaced Out trial version will output 5 seconds of silence every 60 seconds.

INSTALLATION To buy the full version, go to babyaud.io

A software download is supplied with your purchase, however you can always UNINSTALL LOCATIONS
go to babyaud.io/downloads for the latest software updates.

After downloading, unzip the file and select either Mac or PC depending on MAC OS
your system. (Warning: don’t run the PC file on a Mac and vice-versa). AU: /Library/Audio/Plug-ins/Components/
VST: /Library/Audio/Plug-ins/VST/
• MAC: Double click on the PKG installer and follow the instructions VST3: /Library/Audio/Plug-ins/VST3/
• PC/WINDOWS: Double click on the setup file and follow the instructions AAX: /Library/Application Support/Avid/Audio/Plug-Ins/

EULA WINDOWS
VST: The file will be in the custom path selected during installation
VST3: \Program Files\Common Files\VST3\
Please read our End User License Agreement here: babyaud.io/eula AAX: \Program Files\Common Files\Avid\Audio\Plug-Ins\
HAVE FUN USING TAIP!

support@babyaud.io