Certified Quality Auditor: Asq Cqa Total Questions: 103

Certified Quality Auditor
ASQ CQA
Total Questions: 103
https://dumpsboss.com
support@dumpsboss.com
QUESTION NO: 1
Which of the following qualifications would contribute most to an auditor being able to function effectively in various industrial
or service disciplines?
A. Familiarity with technical standards and regulations
B. A college degree in a specific technical area
C. A working knowledge of typical corporate organizational structures
D. Extensive background in calibration and metrology techniques
ANSWER: A
QUESTION NO: 2
The main purpose for conducting an opening meeting for an audit is to
A. clarify the audit objectives
B. discuss previous audit results
C. develop audit criteria
D. establish the scope of the audit
ANSWER: A
QUESTION NO: 3
Which of the following statistics would best describe the central tendency of a sample of data?
A. Mode
B. Mean
C. Standard deviation
D. Range
ANSWER: B
QUESTION NO: 4
DumpsBoss - Pass Your Next Certification Exam Fast!

dumpsboss.com - Page 2 of 35
Typically, which two of the following are more important to an auditor in maintaining his or her auditing competency?
I. Understanding current standards for quality systems
II. Attending audit closing meetings
III. Networking with other auditors and auditing organizations
IV. Learning about changes to existing auditing techniques
A. I and II
B. I and IV
C. II and III
D. III and IV
E. Understanding current standards for quality systems

II. Attending audit closing meetings
III. Networking with other auditors and auditing organizations
IV. Learning about changes to existing auditing techniques
ANSWER: B
QUESTION NO: 5
When is it acceptable to grant an extension of the time frame for a corrective action?
A. When the auditor cannot perform the follow-up audit as scheduled
B. When the auditee determines that the proposed corrective action is not cost-effective
C. When the corrective action plan requires more time than originally anticipated
D. When there has been a change in operators who perform the task
ANSWER: C
QUESTION NO: 6
Which of the following is NOT an acceptable method of verifying a corrective action?
A. Reviewing measurement records after the correction has been made
B. Contacting the individuals responsible for implementing the correction
C. Conducting another audit on the process or system
D. Collecting or observing the new results of the process

ANSWER: B
QUESTION NO: 7
Quality system audits are directed at evaluating the
A. specific procedures that have special significance for a company’s quality mission
B. quality aspects of various segments of a company’s overall approach to quality management
C. quality aspects of specific processes to measure conformance to quality standards
D. organizational units that each have specific assigned missions
ANSWER: B
QUESTION NO: 8
Which of the following is a benefit of performing a systems audit of a current supplier?
A. Identifying the supplier's potential capability
B. Assuring the supplier's capability
C. Determining whether the company should do business with the supplier
D. Evaluating continuing conformance to quality standards
ANSWER: D
QUESTION NO: 9
Which of the following audit strategies is a common technique to assess compliance to a specific requirement at all locations
where that requirement is applicable?
A. Discovery method
B. Element method
C. Department method
D. Process method
ANSWER: B
QUESTION NO: 10

A root cause analysis can best be described as a process that is used to
A. evaluate corrective action plans
B. determine the basic reason for an undesirable condition
C. identify the symptoms of an undesirable condition
D. differentiate between major and minor problems
ANSWER: B
QUESTION NO: 11
Which of the following methods can an audit program manager use to establish consistency among auditors?
A. Develop performance appraisals for all auditors
B. Assign auditors to permanent audit teams
C. Require auditors to read audit journals and references
D. Require auditors to develop their own procedures manual
ANSWER: A
QUESTION NO: 12
During the closing meeting, what is the advantage of having the lead auditor be the only presenter of the audit findings?
A. The auditee will have one person with whom to interact and address comments to.
B. The lead auditor may be the only team member who has verified each finding personally.
C. The lead auditor has the most experience in dealing with the auditee’s management.
D. The lead auditor makes the auditee feel more responsible for corrective action of the findings presented.
ANSWER: A
QUESTION NO: 13
Which of the following is an audit reporting technique for prioritizing audit findings?
A. Weibull distribution
B. Risk-benefit ratio
C. Cognitive dissonance

D. Ishikawa diagram
ANSWER: B
QUESTION NO: 14
Which of the following best describes a frequency distribution?
A. A graph for presenting data along a scale of reference and the number of times each item occurs
B. A time-ordered chart of subgroup averages and control limits
C. A plot of the probability of accepting a hypothesis when it is actually false
D. A graph indicating the difference between an actual value and its predicted value
ANSWER: A
QUESTION NO: 15
Within most organizations, the responsibility for planning and carrying out a programmed series of quality system audits
rests with the
A. quality systems engineering function
B. audit program management function
C. financial audits department
D. planning and scheduling department
ANSWER: B
QUESTION NO: 16
Audit team members are responsible for which two of the following?
I. Initiating the audit
II. Remaining within the scope of the audit
III. Compiling and analyzing evidence
IV. Recommending specific corrective actions
A. I and III
B. I and IV

C. II and III
D. II and IV
E. Initiating the audit

II. Remaining within the scope of the audit
III. Compiling and analyzing evidence
IV. Recommending specific corrective actions
ANSWER: C
QUESTION NO: 17
Which of the following conclusions can be made by an auditor who observes that statistical process control (SPC) charts
posted near operator workstations are done correctly and are regularly completed throughout the plant?
A. Commitment of management to quality is strong
B. Processes are being improved continually
C. Shop floor staff have been fully trained
D. SPC charts are available
ANSWER: D
QUESTION NO: 18
Which of the following best describes quality control?
A. The overall intentions and directions of an organization with regard to quality, as formally expressed by top management
B. The activities that establish the objectives and requirements for quality and for the application of quality system elements
C. The organizational structure and the procedures, processes, and resources needed to implement quality management
D. The operational techniques and activities that are used to fulfill requirements for quality
ANSWER: D
QUESTION NO: 19
The following portion of the test includes several Case Studies. Each Case Study includes introductory information about a
specific company or audit situation, followed immediately by a set of questions related to the situation described and various
audit-related documents, identified by company name.
All of the audit-related documents for these Case Studies are presented in a separate booklet labeled:
CONFIDENTIAL

Audit Documents
These documents were drawn from actual companies and are designed to be examples of genuine audit materials. Their
format and contents have not been altered, and they are intended to represent working documents from everyday situations.
Although the documents for the Case Studies are presented separately, the test will be scored as a whole, on a total of 150
questions. You may go back and check your work on any part of the examination until time is called at the end of the testing
period.
Two auditors are conducting an internal audit of the Quality Electronics and Elements Co. (QEE) system procedures. During
the first day of the audit, the following observations were made.
During the second day of the audit, another unlabeled product container was delivered to the accepted materials station.
When the auditor noted the lack of label, the auditee immediately filled out a label and affixed it to the container. In this
situation, the auditor should do which of the following?
A. Write an observation that the auditee identified the container properly.
B. Write a finding because an improperly identified container could be shipped.
C. Write a finding against the Receiving department.
D. Write a finding to encourage a root cause analysis.
ANSWER: D
QUESTION NO: 20
An auditee is likely to be most threatened by an auditor’s use of which of the following interviewing techniques?
A. Paraphrasing an auditee’s response while writing it down
B. Being silent while waiting for an auditee to respond to a question
C. Underlining key facts when recording an auditee’s response
D. Using a tape recorder to record an auditee’s response
ANSWER: D
QUESTION NO: 21
Which of the following would NOT normally be used as a major category in a cause and effect diagram?
A. Modifications
B. Methods
C. Materials
D. Machines

ANSWER: A
QUESTION NO: 22
The most important item to check when auditing against a specification is the
A. list of documents within the specification
B. copy of the previous revision of the specification
C. document control procedure
D. revision level of the specification
ANSWER: D
QUESTION NO: 23
“What are your defined responsibilities in the calibration laboratory?”
The question above is an example of what type of questioning technique?
A. Open-ended
B. Close-ended
C. Leading
D. Discovery
ANSWER: A
QUESTION NO: 24
Quality auditors help companies improve their processes, products, and services by
A. developing more comprehensive checklists
B. guaranteeing product quality
C. recommending better techniques for motivating employees
D. reporting positive as well as negative evaluation results
ANSWER: D

QUESTION NO: 25
An auditor is performing an audit of a drilling machine that produces 100 pieces a day and that is showing improved quality.
Which of the following rules should be used for determining the proper sample size for a fixed level of confidence?
A. The moving average should be calculated.
B. The sample size should be decreased as the quality improves.
C. The AQL of the raw material should be used.
D. A 10% sample size should be used, regardless of the change in quality.
ANSWER: B
QUESTION NO: 26
Which of the following requests by an auditor is likely to obtain the most objective evidence for verification?
A. “What kind of information do you receive?”
B. “Who provides the information to you?”
C. “Describe how you receive information.”
D. “Show me the information you have received.”
ANSWER: D
QUESTION NO: 27
Managing the quality audit process includes ensuring that which of the following audit functions occur?
I. Preparing and issuing the annual audit schedule
II. Issuing audit reports in a timely manner
III. Identifying appropriate corrective actions
IV. Assessing the effectiveness of the quality audit process
A. I and II only
B. I and III only
C. II and IV only
D. I, II, and IV only
E. Preparing and issuing the annual audit schedule

II. Issuing audit reports in a timely manner

III. Identifying appropriate corrective actions
IV. Assessing the effectiveness of the quality audit process
ANSWER: D
QUESTION NO: 28
The auditor has the most independence from the auditee in which of the following types of audits?
A. First-party
B. Supplier
C. Third-party
D. Management
ANSWER: C
QUESTION NO: 29
An auditee’s procedures require that all design drawings be dated and signed. During a design review, an auditor notices
that several drawings are signed, but not dated. The missing dates are examples of what kind of data?
A. Quantitative
B. Measured
C. Variable
D. Qualitative
ANSWER: D
QUESTION NO: 30
During an audit interview, the auditee is not providing needed information about the process for which the auditee has sole
responsibility. In an effort to minimize any miscommunication, the auditor should
A. continue to repeat the questions until the auditee answers
B. explain to the interviewee the consequences of being uncooperative
C. terminate the interview and skip that section of the plan
D. request that the escort clarify the questions to the auditee
ANSWER: D

QUESTION NO: 31
Which of the following indicates that a quality system is effective?
A. The required system is in place and continuous improvement is evident.
B. An audit was conducted and no non-conformances were found.
C. An audit report states that the intent of the standard is being met.
D. No corrective action requests have been issued for a specified period of time.
ANSWER: A
QUESTION NO: 32
CONFIDENTIAL
Audit Documents
period.
Which department is responsible for determining whether an outbound product has been damaged in handling or storage?
A. Inventory Control
B. Quality Assurance
C. Shipping
D. Engineering
ANSWER: C
QUESTION NO: 33
When a proposed corrective action plan is judged unacceptable, an auditor should do which of the following?

A. Revise the submitted plan on the basis of the auditor’s knowledge and technical expertise.
B. Notify the auditee and request that a new plan be submitted by the next level of management.
C. Discuss the plan’s deficiencies with the auditee and request a revised plan.
D. Suggest that the auditee benchmark the deficient area and then rewrite the plan.
ANSWER: C
QUESTION NO: 34
A quality audit observation is defined as
A. a noted item of objective evidence found during an audit
B. an accepted level of audit findings defined as "major" and "minor"
C. an auditor's initial notice of a potential nonconformance
D. the lead auditor's perception of a potential problem
ANSWER: A
QUESTION NO: 35
Auditor independence includes freedom from which of the following?
I. Bias
II. Conflict of interest
III. External influences
IV. Previous exposure to the area
A. I and II only
B. II and IV only
C. I, II, and III only
D. II, III and IV only
E. Bias
II. Conflict of interest
III. External influences
IV. Previous exposure to the area
ANSWER: C

QUESTION NO: 36
Management can best ensure support for the audit function from other departments by
A. continually evaluating the audit results
B. reviewing audit follow-up activities and ensuring that corrective action requests are closed in a timely manner
C. hiring personnel who have knowledge of quality procedures and by providing continuing education
D. emphasizing the importance and usefulness of audits to the organization
ANSWER: D
QUESTION NO: 37
An internal audit schedule should be prioritized on the basis of all of the following criteria EXCEPT the
A. cost of the activities
B. risk of the activities
C. size of the auditee’s department
D. management’s requests
ANSWER: C
QUESTION NO: 38
Which of the following types of data is likely to be most reliable?
A. Data from an outside source
B. Data from the audited area
C. Attributes data
D. Corroborated data
ANSWER: D
QUESTION NO: 39
Which of the following is the most fundamental role of the audit function?
A. Reporting identified problems to the supervisor of the audited area
B. Monitoring performance of the organization and determining corrective action for substandard performance

C. Reporting findings to upper management to ensure that proper corrective action is taken
D. Verifying the effectiveness of the organization’s quality system in preventing substandard performance
ANSWER: D
QUESTION NO: 40
During an audit, the client learns that the auditor has recently completed a quality system audit of a major competitor. The
client then questions the auditor about the competitor’s audit results. The best action for the auditor to take is to
A. discuss the results of the audit with the client, only if the competitor agrees
B. go offline with the client, explain that the question is unethical, and that if the client persists, additional action by the
auditor will be taken
C. explain to the client that it would be inappropriate to discuss the results of that audit
D. obtain permission from the competitor to use the results of the audit as examples for future clients, provided that the
examples are not specific to business affairs or technical processes
ANSWER: C
QUESTION NO: 41
As the last step before distributing an audit plan, an auditor should have the plan
A. approved by the client
B. approved by the auditee
C. reviewed by the organization to be audited
D. reviewed by auditee management
ANSWER: A
QUESTION NO: 42
The authority for auditors to perform external second-party audits is provided by
A. a company’s quality assurance manual
B. the quality standard being audited against
C. the established audit procedures
D. the purchase contract

ANSWER: D
QUESTION NO: 43
Audits are conducted against a performance standard to ensure which of the following?
I. Meaningful measurements
II. Objectively evaluated performance
III. Perceptive observations
A. I only
B. I and II only
C. II and III only
D. I, II, and III
E. Meaningful measurements
II. Objectively evaluated performance
III. Perceptive observations
ANSWER: B
QUESTION NO: 44
The process information shown in the graph above is indicative of a
A. cycle
B. run
C. trend
D. shift
ANSWER: C

QUESTION NO: 45
A cause and effect diagram is a useful tool for doing which of the following?
A. Determining the flow of a process
B. Detecting shifts in a process
C. Developing theories based on symptoms
D. Arranging theories by defect count
ANSWER: C
QUESTION NO: 46
During the opening meeting, it is the auditee’s responsibility to
A. prepare the meeting agenda
B. set the audit schedule
C. state the audit purpose and scope
D. identify safety requirements
ANSWER: D
QUESTION NO: 47
After an external audit, the auditee may be asked to evaluate which of the following auditor skills or elements of the audit?
A. Interviewing, interaction, accuracy of the audit report
B. Audit scheduling, auditor training records, observing an audit
C. Communication, listening, checklist preparation
D. Clarity of past audit reports, number of findings, lack of bias
ANSWER: A
QUESTION NO: 48
During the closing meeting, the lead auditor should do which of the following?
A. Accept the presentation of objective evidence.
B. Review the auditor’s qualifications.

C. Perform a causal analysis with the auditee.
D. Present a summary of audit results.
ANSWER: D
QUESTION NO: 49
Which of the following factors related to scheduling would most directly affect the performance of an audit?
A. The client's company policy
B. The scope of the audit
C. The auditee's annual business plan
D. The evaluation of corrective action
ANSWER: B
QUESTION NO: 50
Auditors can use flowcharts in their work in order to
A. analyze the causal factors of process dispersion
B. understand the overall process or system being audited
C. distinguish variations in a process over time
D. determine process capability and uniformity
ANSWER: B
QUESTION NO: 51
Measures of which of the following provide attributes data?
A. Temperature in degrees
B. Attendance at meetings
C. Weight in pounds
D. Length in metric units
ANSWER: B

QUESTION NO: 52
During the course of a 10-day system audit, when should the auditee be briefed?
A. Every day
B. Every other day
C. As requested by the auditee
D. At the beginning and the end of the audit
ANSWER: A
QUESTION NO: 53
Which of the following represents a sound time-management technique?
A. Scheduling interviews simultaneously at two different facilities
B. Constantly revising the audit schedule to accommodate follow-up questions
C. Anticipating needs and making them known to the auditee in advance
D. Determining the detailed audit schedule at the audit opening meeting
ANSWER: C
QUESTION NO: 54
The accuracy of quality audit documentation is especially important in which of the following situations?
A. One of the audit team members is aware of a possible personal bias related to the audit.
B. The documentation is likely to be used as evidence in litigation.
C. An audit has yielded more documentation than expected.
D. The documentation supports an auditor’s viewpoint.
ANSWER: B
QUESTION NO: 55
For third-party audits, which two of the following factors should be considered by the auditor when agreeing to the amount of
time needed to complete corrective action?
I. The resources available to the auditor for determining when follow-up can occur

II. The resources available to the auditee to enact the corrective action
III. The auditee’s experience in project evaluation techniques
IV. The number of findings recorded during the audit
A. I and III
B. I and IV
C. II and III
D. II and IV
E. The resources available to the auditor for determining when follow-up can occur
II. The resources available to the auditee to enact the corrective action
III. The auditee’s experience in project evaluation techniques
IV. The number of findings recorded during the audit
ANSWER: D
QUESTION NO: 56
The objective evidence supporting an audit observation must be
A. recorded on the working papers
B. verified by the escort
C. mentioned to the auditee
D. written as a nonconformance
ANSWER: A
QUESTION NO: 57
Partitioning or segmenting an audit is a useful way to
A. understand resource flows
B. simulate operating conditions
C. determine the relationship among parts
D. manage a large audit
ANSWER: D

QUESTION NO: 58
A quality audit contributes to improvement of the quality of a company’s products and services by
A. identifying under-performers
B. identifying the need for corrective action
C. suggesting ways to improve performance
D. improving customer satisfaction
ANSWER: B
QUESTION NO: 59
Communication by telephone is likely to be most effective when it is used for
A. performing assessments
B. corroborating information
C. meeting random sampling requirements
D. assessing the adequacy of a written form
ANSWER: B
QUESTION NO: 60
When should audit checklists be prepared?
A. At the time the audit is requested
B. When the lead auditor is appointed
C. During the opening meeting
D. Before the field work is begun
ANSWER: D
QUESTION NO: 61
While performing an internal audit, an auditor notices that an operator on one shift skips part of the documented procedure.
In this situation, the auditor should do which of the following?
A. Make a note on the checklist and initial it.

B. Report it to the operator’s supervisor or manager.
C. Question the operator about the observation.
D. Ask another operator to evaluate the situation.
ANSWER: C
QUESTION NO: 62
During an audit, the best way to determine whether an audited process is consistent with the requirements of the relevant
written procedure is by
A. doing a statistical analysis of historical data
B. physically observing the actual practice
C. questioning the personnel who perform the procedure
D. evaluating anecdotal evidence
ANSWER: B
QUESTION NO: 63
In quality auditing, a finding is defined as
A. an observation of common behaviors
B. an item of objective evidence found during an audit
C. a fundamental deficiency that can lead to nonconformance
D. a conclusion of importance based on evidence
ANSWER: D
QUESTION NO: 64
Which of the following is the greatest benefit of an internal audit program to an organization?
A. It fulfills most contractual quality requirements.
B. It provides feedback for continuous improvement.
C. It prepares an organization for third-party audits.
D. It frequently eliminates the need for external audits.

ANSWER: B
QUESTION NO: 65
The fraction of nonconforming products is plotted on which of the following types of control charts?
A. p chart
B. u chart
C. np chart
D. c chart
ANSWER: A
QUESTION NO: 66
CONFIDENTIAL
Audit Documents
period.
If the audit also revealed that customer-required certifications were not included with a shipment, a finding should be written
against which department?
A. Quality Assurance
B. Purchasing
C. Production Control
D. Shipping
ANSWER: D

QUESTION NO: 67
Which of the following behaviors is LEAST important for an auditor to exhibit?
A. Remaining calm throughout the audit
B. Displaying honesty and forthrightness
C. Adhering to the original audit plan
D. Working in a planned and systematic manner
ANSWER: C
QUESTION NO: 68
Who makes the final determination regarding the distribution of the audit report?
A. The lead auditor
B. The audit group manager
C. The auditee
D. The client
ANSWER: D
QUESTION NO: 69
The most important objective in the development of a supplier evaluation system is to reduce
A. the number of suppliers
B. the number of audit hours
C. inspection at the customer site
D. inspection at the supplier site
ANSWER: C
QUESTION NO: 70

CONFIDENTIAL
Audit Documents
period.
The auditor’s finding on products without “Accepted Material Traveler Cards” should be written against which of the following
departments?
A. Production Control
B. Quality Assurance
C. Shipping
D. Engineering
ANSWER: C
QUESTION NO: 71
A root cause of a nonconformance is defined as a problem that
A. is discovered by conducting designed experiments
B. is established through the use of fishbone diagrams
C. must be reviewed by the material review board
D. must be corrected in order to prevent a recurrence
ANSWER: D
QUESTION NO: 72
Which of the following is most important for an auditor to convey at an initial audit interview?
A. A give-and-take atmosphere that focuses on compromise
B. A formal approach that is guided by specific roles for each participant
C. An interest in cooperation and open dialogue
D. A personal approach to information gathering

ANSWER: C
QUESTION NO: 73
An auditee responds to a corrective action request by stating that the problem has never occurred before and is “not the
norm for our operation.” Which of the following is the most appropriate action for the lead auditor?
A. Note that the deficiency is the result of a random occurrence.
B. Draft a response explicitly requesting a more concise root-cause analysis.
C. Confer with the audit client to assess the appropriateness of the response.
D. Schedule a follow-up audit immediately.
ANSWER: B
QUESTION NO: 74
Which two of the following conditions must be met in order to infer statistical significance about the results of an audit
sample?
I. The population must be homogeneous.
II. The sample size must be greater than 10.
III. The sample must be random.
IV. The sample must be taken from multiple locations.
A. I and II
B. I and III
C. II and III
D. III and IV
E. The population must be homogeneous.

II. The sample size must be greater than 10.
III. The sample must be random.
IV. The sample must be taken from multiple locations.
ANSWER: B
QUESTION NO: 75
An audit report should contain which of the following?
A. Audit findings

B. Root cause analysis
C. Corrective action
D. Re-audit schedule
ANSWER: A
QUESTION NO: 76
Which of the following types of tools or techniques is considered qualitative?
A. Histograms
B. Frequency distributions
C. Pareto charts
D. Process observations
ANSWER: D
QUESTION NO: 77
The confidence level in a sampling plan is defined as the
A. degree of uncertainty that the selected sample contains at least one example of any errors that are present
B. degree of certainty that the selected sample contains at least one example of any errors that are present
C. lowest performance level that can be considered acceptable for the function being audited
D. maximum error rate that can be considered acceptable for the function being audited
ANSWER: B
QUESTION NO: 78
Which of the following is the most useful graphical tool for promoting an understanding of process capability?
A. A flowchart
B. A histogram
C. An affinity diagram
D. An Ishikawa diagram

ANSWER: B
QUESTION NO: 79
Sampling procedures used in audits are designed to
A. verify the scope of an audit
B. corroborate audit findings
C. conserve time in data collection
D. verify that all checklist items have been completed
ANSWER: C
QUESTION NO: 80
Which of the following is most likely to request an audit?
A. An auditee
B. A client
C. A company's audit department
D. A company's supplier audit group
ANSWER: B
QUESTION NO: 81
Which of the following authorities initially determines whether a third-party audit should be conducted?
A. Client
B. Lead auditor
C. Auditee
D. Audit team
ANSWER: A
QUESTION NO: 82

If the audit escort for one area is repeatedly late or unavailable, what is the best option open to the auditor?
A. Notify the auditee management of the consequences created by the delays.
B. Narrow the scope of the audit to accommodate the delays.
C. Proceed without the escort.
D. Assess system effectiveness using objective evidence from other areas.
ANSWER: A
QUESTION NO: 83
An auditee has responded to all requests for corrective action in a timely manner. Which of the following is the next step for
the auditor?
A. Close all those findings in which the response is accompanied by adequate objective evidence.
B. Evaluate the adequacy of the responses.
C. Schedule a follow-up audit to verify corrective action.
D. Schedule a follow-up audit for critical items and schedule verification for other routine items at the next scheduled audit.
ANSWER: B
QUESTION NO: 84
CONFIDENTIAL
Audit Documents
period.
Who is responsible for evaluating the adequacy of QEE’s handling and storage practices?
A. The shipping manager

B. Individual shipping and receiving clerks
C. The quality assurance manager
D. The customer service department
ANSWER: C
QUESTION NO: 85
Recognizing the need for a follow-up audit is the responsibility of the
A. lead auditor
B. corrective action team
C. client
D. auditee
ANSWER: A
QUESTION NO: 86
An auditor finds deficiencies in the order entry, purchasing, product test, and shipping functions of a potential supplier. Which
of them should have the highest priority in the audit report?
A. Order entry
B. Product test
C. Purchasing
D. Shipping
ANSWER: B
QUESTION NO: 87
Which of the following is the best method for determining the retention policy of the audit documents?
A. Agreement between the client, the auditing organization, and the auditee
B. The status of corrective action for the findings written in the audit report
C. Distribution of the final audit report
D. Significance of the audit findings written in the final audit report

ANSWER: A
QUESTION NO: 88
To determine whether a finding is a minor, isolated incident or a serious, chronic problem, an auditor should consult with the
A. auditee’s quality assurance inspector
B. auditee’s department manager
C. audit team
D. client
ANSWER: C
QUESTION NO: 89
Management of an internal audit program should consider all of the following EXCEPT
A. taking ownership of the quality assurance program
B. supporting company objectives, goals, and strategies
C. assuring that audits are a means to evaluate company performance
D. weighing costs versus benefits of conducting an audit
ANSWER: A
QUESTION NO: 90
The type of chart that presents the value of items in descending order is a
A. histogram
B. Pareto chart
C. u chart
D. cusum chart
ANSWER: B
QUESTION NO: 91

Auditors who audit outside their own country should be familiar with
A. their own biases
B. the auditee's attitude
C. industry practices at the audit site
D. the local customs at the audit site
ANSWER: D
QUESTION NO: 92
Which of the following is an example of a short-term corrective action?
A. Improving process capability
B. Analyzing a field failure
C. Obtaining missing signatures on a purchase order
D. Correcting the problem of obsolete drawings
ANSWER: C
QUESTION NO: 93
When an internal audit program is being formulated, the auditees' anxiety about the audit process is most likely to be
reduced by which of the following?
A. A cooperative process for involving participants in the development of audit procedures
B. A clear description of the rules developed by the auditing group
C. Clearly stated provisions for performing unannounced audits
D. Clearly stated procedures for resolving audit findings
ANSWER: A
QUESTION NO: 94
An audit trail is necessary in order to
A. schedule and budget for audit assignments
B. show how and when items were reviewed

C. provide management with justification for an audit
D. provide the audit manager with audit results
ANSWER: B
QUESTION NO: 95
During a supplier audit, all of the following documentation can be reviewed EXCEPT
A. reports of internal audits performed by the supplier
B. information concerning the company’s parts inventory
C. quality records for a product made for another customer
D. operating or working instructions
ANSWER: C
QUESTION NO: 96
The best way to communicate audit results to upper management would be to
A. provide a list of findings of noncompliance and supporting objective evidence
B. present a list of all items of nonconformance that require corrective action
C. present a report of the performance against the audit standard of all areas included in the audit scope
D. present an evaluation of overall quality performance and provide an executive summary in the formal report
ANSWER: D
QUESTION NO: 97
Who is responsible for preparing the corrective action plan?
A. The auditor
B. The auditee
C. The registrar
D. The audit manager
ANSWER: B

QUESTION NO: 98
The main function of an audit checklist is to
A. identify the specific products to be examined
B. serve as a guide for members of the audit team
C. save time by auditing only the items listed
D. expedite the preparation of the final audit report
ANSWER: B
QUESTION NO: 99
An auditee who objects to any part of an audit plan should first make those objections known to the
A. lead auditor
B. audit team members
C. audit program manager
D. client
ANSWER: A
QUESTION NO: 100
An audit schedule is an integral part of which of the following phases of the auditing process?
A. Initiation
B. Preparation
C. Closing
D. Reporting
ANSWER: B
QUESTION NO: 101
When lower-tier documents are compared to higher-tier documents before the fieldwork starts, the comparison is called a
A. desk audit
B. process audit

C. conformance audit
D. management audit
ANSWER: A
QUESTION NO: 102
Generally, which of the following is the most meaningful way to trace a finished product?
A. Forward from starting with the acquisition of raw materials
B. Forward from the first production activity
C. Backward from the start of the assembly process
D. Backward from the end point
ANSWER: D
QUESTION NO: 103
What action should an auditor take if an auditee responds to a procedural noncompliance by stating that the procedure
conflicts with a written company policy?
A. Close out the corrective action request.
B. Notify the auditee to comply with the procedure.
C. Void the noncompliance.
D. Request that the auditee resolve the conflict.
ANSWER: D


Certified Quality Auditor: Asq Cqa Total Questions: 103

Uploaded by

Copyright:

Available Formats

Certified Quality Auditor: Asq Cqa Total Questions: 103

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Certified Quality Auditor: Asq Cqa Total Questions: 103

Uploaded by

Copyright:

Available Formats

Certified Quality Auditor

A. Familiarity with technical standards and regulations

B. A college degree in a specific technical area

C. A working knowledge of typical corporate organizational structures

D. Extensive background in calibration and metrology techniques

The main purpose for conducting an opening meeting for an audit is to

A. clarify the audit objectives

B. discuss previous audit results

C. develop audit criteria

D. establish the scope of the audit

DumpsBoss - Pass Your Next Certification Exam Fast!

I. Understanding current standards for quality systems

II. Attending audit closing meetings

III. Networking with other auditors and auditing organizations

IV. Learning about changes to existing auditing techniques

E. Understanding current standards for quality systems

A. When the auditor cannot perform the follow-up audit as scheduled

Which of the following is NOT an acceptable method of verifying a corrective action?

A. Reviewing measurement records after the correction has been made

B. Contacting the individuals responsible for implementing the correction

C. Conducting another audit on the process or system

D. Collecting or observing the new results of the process

DumpsBoss - Pass Your Next Certification Exam Fast!

Quality system audits are directed at evaluating the

B. quality aspects of various segments of a company’s overall approach to quality management

C. quality aspects of specific processes to measure conformance to quality standards

D. organizational units that each have specific assigned missions

Which of the following is a benefit of performing a systems audit of a current supplier?

A. Identifying the supplier's potential capability

B. Assuring the supplier's capability

C. Determining whether the company should do business with the supplier

D. Evaluating continuing conformance to quality standards

DumpsBoss - Pass Your Next Certification Exam Fast!

A. evaluate corrective action plans

B. determine the basic reason for an undesirable condition

C. identify the symptoms of an undesirable condition

D. differentiate between major and minor problems

A. Develop performance appraisals for all auditors

B. Assign auditors to permanent audit teams

C. Require auditors to read audit journals and references

D. Require auditors to develop their own procedures manual

DumpsBoss - Pass Your Next Certification Exam Fast!

Which of the following best describes a frequency distribution?

B. A time-ordered chart of subgroup averages and control limits

C. A plot of the probability of accepting a hypothesis when it is actually false

A. quality systems engineering function

B. audit program management function

C. financial audits department

D. planning and scheduling department

I. Initiating the audit

II. Remaining within the scope of the audit

III. Compiling and analyzing evidence

IV. Recommending specific corrective actions

DumpsBoss - Pass Your Next Certification Exam Fast!

E. Initiating the audit

A. Commitment of management to quality is strong

B. Processes are being improved continually

C. Shop floor staff have been fully trained

D. SPC charts are available