 TDA7269A

14 + 14W STEREO AMPLIFIER WITH MUTE & ST-BY

WIDE SUPPLY VOLTAGE RANGE UP TO

±20V
SPLIT SUPPLY
HIGH OUTPUT POWER
14 + 14W @ THD =10%, RL = 8Ω, VS = +16V
NO POP AT TURN-ON/OFF
MUTE (POP FREE)
STAND-BY FEATURE (LOW Iq)
SHORT CIRCUIT PROTECTION TO GND
THERMAL OVERLOAD PROTECTION
Multiwatt11
ORDERING NUMBER: TDA7269A
DESCRIPTION
The TDA7269A is class AB dual Audio power am-
plifier assembled in the Multiwatt package, spe-
cially designed for high quality sound application
as Hi-Fi music centers and stereo TV sets.

Figure 1: Typical Application Circuit

+VS

1000µF
15K 1µF
MUTE/
ST-BY 3
5
IN (L) 7
+ 4 OUT (L)
1µF -
18K 4.7Ω
RL (L)
8 IN- (L)
100nF
15K 18K
GND 9 560Ω
+5V µP
10 IN- (R) 560Ω

18K
1µF - 2 OUT (R)
IN (R) 11
+
4.7Ω
1 6 RL (R)
-VS 100nF

1000µF
D94AU085

July 1998 1/7

TDA7269A

ABSOLUTE MAXIMUM RATINGS

Symbol Parameter Value Unit
VS DC Supply Voltage ±22 V
IO Output Peak Current (internally limited) 3 A
Ptot Power Dissipation T case = 70°C 40 W
Top Operating Temperature 0 to 70 °C
Tstg, Tj Storage and Junction Temperature -40 to +150 °C

PIN CONNECTION (Top view)

11 IN+(1)
10 IN-(1)
9 GND
8 IN-(2)
7 IN+(2)
6 -VS
5 MUTE
4 OUTPUT(2)
3 +VS
2 OUTPUT(1)
1 -VS

TAB CONNECTED TO PIN 6 D95AU316

THERMAL DATA
Symbol Description Value Unit
Rth j-case Thermal Resistance Junction-case Max 2.8 °C/W

SINGLE SUPPLY APPLICATION

+VS
D1 5.1V

R1 C1 R3 C5 C6
10K 1µF 15K 1000µF 0.1µF
MUTE/ST-BY 3
5
PLAY
5V Q1 IN (L) 7 C9 470µF
BSX33 + 4 OUT (L)
0 C3 1µF -
MUTE R2 R4 R8 OUT
15K 30K 4.7Ω (L)
8 IN- (L)
C7
9 0.1µF
C2 R5
100µF C4 1µF 1K
IN (R) 11 + C10 470µF
2 IN- (R)
-
R6 R9 OUT
30K 4.7Ω (R)
10 OUT (R)
C8
1 0.1µF
6 R7
1K
GND
D96AU444

2/7
 TDA7269A

ELECTRICAL CHARACTERISTICS (Refer to the test circuit, VS = + 16V; RL = 8Ω; RS = 50Ω;

GV = 30dB; f = 1KHz; Tamb = 25°C, unless otherwise specified.)
Symbol Parameter Test Condition Min. Typ. Max. Unit
VS Supply Range R L = 8Ω ; +5 +20 V
R L = 4Ω ; +5 +15 V
Iq Total Quiescent Current 60 100 mA
VOS Input Offset Voltage –25 +25 mV
Ib Non Inverting Input Bias Current 500 nA
PO Output Power THD = 10%
R L = 8Ω ; 12 14 W
VS + 12.5V; RL = 4Ω 8 10 W
THD = 1%
R L = 8Ω ; 9 11 W
VS + 12.5V; RL = 4Ω 6 7.5 W
THD Total Harmonic Distortion R L = 8Ω ; PO = 1W; f = 1KHz 0.03 %
R L = 8Ω ; 0.7 %
PO = 0.1 to 7W;
f = 100Hz to 15KHz
R L = 4Ω ; PO = 1W; f = 1KHz 0.02 %
R L = 4Ω ; VS + 10V; 1 %
PO = 0.1 to 5W;
f = 100Hz to 15KHz
CT Cross Talk f = 1KHz 70 dB
f = 10KHz 50 60 dB
SR Slew Rate 6.5 10 V/µs
GOL Open Loop Voltage Gain 80 dB
eN Total Input Noise A Curve 3 µV
f = 20Hz to 22KHz 4 8 µV
Ri Input Resistance 15 20 KΩ
SVR Supply Voltage Rejection fr = 100Hz Vr = 0.5V 60 dB
(each channel)
Tj Thermal Shut-down 145 °C
Junction Temperature
MUTE FUNCTION [ref: +VS] (*)
VTMUTE Mute / Play Threshold -7 -6 -5 V
AM Mute Attenuation 60 70 dB
STAND-BY FUNCTION [ref: +V S] (Only for Split Supply)
VTST-BY Stand-by / Mute Threshold -3.5 -2.5 -1.5 V
AST-BY Stand-by Attenuation 110 dB
Iq ST-BY Quiescent Current @ Stand-by 3 6 mA
(*) In mute condition the current drawn from pin 5 must be ≤ 650µA.

3/7
TDA7269A

MUTE STAND-BY FUNCTION - when Vpin5 is between +VS - 2.5V and +VS
- 6V the final stage current generators are
The pin 5 (MUTE/STAND-BY) controls the ampli- switched on and the amplifier is in mute
fier status by two different thresholds, referred to mode
+VS. - when Vpin5 is lower than +VS - 6V the am-
- When Vpin5 higher than = +VS - 2.5V the plifier is play mode.
amplifier is in Stand-by mode and the final
stage generators are off
Figure 2

+VS
(V)

20

-VS
-20

VIN
(mV)

Vpin5
(V)

VS
VS-2.5
VS-6
VS-10

Iq
(mA)

VOUT
(V)

OFF PLAY STDBY PLAY OFF

STDBY STDBY

MUTE D94AU086 MUTE MUTE MUTE

4/7
 TDA7269A

Figure 3: Test and Application Circuit (Stereo Configuration)

+VS

C4 C5
R2 C3 +VS
MUTE/
ST-BY 3
5
R1 IN (L) 7
+ 4 OUT (L)
SW1 C1 -
DZ R5 R7
RL (L)
8 IN- (L)
C8
R4 R3
GND 9 R6

SW2 10 IN- (R) R9

R8
C2 - 2 OUT (R)
IN (R) 11
+
R10
1 6 RL (R)
-VS C9

C7 C6
D94AU087

APPLICATIONS SUGGESTION nents are those shown are the demo board sche-
(Demo Board Schematic) matic different values can be used: the following
table can help the designer.
The recommended values of the external compo-
RECOMMENDED LARGER THAN SMALLER THAN
COMPONENTS PURPOSE
VALUE RECOMMENDED VALUE RECOMMENDED VALUE
Increase of Dz
R1 10KΩ Mute Circuit
Biasing Current
R2 15KΩ Mute Circuit Vpin # 5 Shifted Downward Vpin # 5 Shifted Upward
R3 18KΩ Mute Circuit Vpin # 5 Shifted Upward Vpin # 5 Shifted Downward
R4 15KΩ Mute Circuit Vpin # 5 Shifted Upward Vpin # 5 Shifted Downward
R5, R8 18KΩ Closed Loop Gain Increase of Gain
R6, R9 560Ω Setting (*) Decrease of Gain
R7, R10 4.7Ω Frequency Stability Danger of Oscillations Danger of Oscillations
Input DC Higher Low Frequency
C1, C2 1µF
Decoupling Cutoff
St-By/Mute Time
C3 1µF Larger On/Off Time Smaller On/Off Time
Constant
Supply Voltage
C4, C6 1000µF Danger of Oscillations
Bypass
Supply Voltage
C5, C7 0.1µF Danger of Oscillations
Bypass
C8, C9 0.1µF Frequency Stability
Dz 5.1V Mute Circuit
(*) Closed loop gain has to be => 25dB

5/7
TDA7269A

MULTIWATT11 PACKAGE MECHANICAL DATA

mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX.
A 5 0.197
B 2.65 0.104
C 1.6 0.063
D 1 0.039
E 0.49 0.55 0.019 0.022
F 0.88 0.95 0.035 0.037
G 1.57 1.7 1.83 0.062 0.067 0.072
G1 16.87 17 17.13 0.664 0.669 0.674
H1 19.6 0.772
H2 20.2 0.795
L 21.5 22.3 0.846 0.878
L1 21.4 22.2 0.843 0.874
L2 17.4 18.1 0.685 0.713
L3 17.25 17.5 17.75 0.679 0.689 0.699
L4 10.3 10.7 10.9 0.406 0.421 0.429
L7 2.65 2.9 0.104 0.114
M 4.1 4.3 4.5 0.161 0.169 0.177
M1 4.88 5.08 5.3 0.192 0.200 0.209
S 1.9 2.6 0.075 0.102
S1 1.9 2.6 0.075 0.102
Dia1 3.65 3.85 0.144 0.152

6/7
 TDA7269A

Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are
subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products
are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics
 1998 STMicroelectronics – Printed in Italy – All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco - The Netherlands -
Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A.

7/7