Molded Paper Pulp Packaging: Make Your Ideas Real

APPLICATION BRIEF:
MOLDED PAPER PULP PACKAGING
OVERVIEW
Molded paper pulp, which is also called molded fiber, has been used since the 1930s to make
containers, trays and other packages. Molded pulp packaging experienced a decline in the
1970s after the introduction of plastic foam packaging. But more recently the use of molded
pulp packaging is growing because it fits in well with today’s emphasis on environmental
friendliness and sustainability. Paper pulp can be produced from old newsprint, corrugated
boxes and other plant fibers. Today, molded pulp packaging is widely used for electronics,
household goods, automotive parts and medical products. It is also used as an edge protector
or pallet tray for many shipping and handling applications.
CAD model of FDM packaging tool
APPLICATION OUTLINE
The two most common types of molded pulp
are classified as Type 1 and Type 2. Type 1 APPLICATION CHECKLIST
is commonly used for support packaging
applications with 3/16 inch (4.7 mm) to 1/2
inch (12.7 mm) walls. Type 1 molded pulp FDM IS A BEST FIT FOR MOLDED
manufacturing uses a fiber slurry made from PULP PACKAGING WHEN:
ground newsprint, kraft paper or other fibers Sample molded pulp parts needed
dissolved in water. A mold mounted on a platen is for evaluation.
dipped or submerged in the slurry and a vacuum
is applied to the backside. The vacuum pulls the Short-run production up to FDM paper pulp tool
slurry onto the mold to form the shape of the 10,000 pieces.
package. While still under the vacuum, the mold is
Design changes are likely.
removed from the slurry tank, allowing the water
to drain from the pulp. Air is then blown through
the tool to eject the molded fiber piece. The part Product customization is desirable.
is typically deposited on a conveyor that moves
through a drying oven.
Complex designs with many
Type 2 molded pulp manufacturing is typically features.
used for packaging electronic equipment, cellular
phones and household items with containers BENEFITS OF FDM FOR MOLDED
PULP PACKAGING INCLUDE:
that have 1/16 inch (1.6 mm) to 3/16 inch (4.7 mm) FDM paper pulp tool with custom
walls. Type 2 molded pulp uses the same material 80 – 95% cost reduction.
sparse fill
and follows the same basic process as Type 1
manufacturing up the point where the vacuum
pulls the slurry onto the mold. After this step is 50 – 85% lead time reduction.
completed, a transfer mold mates with the fiber
package on the side opposite of the original mold. Minimal direct labor needed.
A vacuum is then pulled through the transfer mold
and the vacuum is released from the original mold
so that the package adheres to the transfer mold. No process changes in molding
The transfer mold then moves the molded article operation.
to the drying conveyor. Type 2 molding provides a
smoother surface on the transfer mold side of the
package.
Paper pulp part produced by tool
Molded pulp packaging tools are normally made by machining a metal tool in the shape of a shown above
mirror image of the finished package. Holes are drilled through the tool and then a screen is
attached to its surface. The vacuum is drawn through the holes while the screen prevents the
pulp from clogging the holes. It costs about $30,000 and takes two weeks to make a metal tool
for a typical large package.
Fused Deposition Modeling (FDM) provides an alternative method for producing molded pulp
tooling that can provide dramatic time and cost savings and improve the appearance of the
finished product. FDM technology is an additive manufacturing process that builds plastic parts
layer by layer, using data from computer-aided design (CAD) files. FDM molded pulp tooling can
MAKE YOUR IDEAS REAL.

be produced in a fraction of the time and cost of conventional tooling because the FDM tool
can be produced to be both porous and rigid. FDM eliminates the need for costly machining of
the contour of the tool as well as the holes required to draw the vacuum. FDM also eliminates
the need to attach the screen to the mold. FDM molds can be run alongside traditional molds
with no alternation to the slurry formula, cycle time, vacuum pressure or other process variables,
making it easy to integrate FDM tooling into any molded fiber operation.
PROCESS OVERVIEW
FDM tool for electronics packaging.
The geometry of the FDM pulp tooling is very similar to metal tooling except that the holes are
eliminated. In some cases, the wall thickness of the mold may be reduced to decrease build
time and material consumption and supporting ribs may be added to ensure rigidity. Within
the Insight FDM preprocessing software, build parameters are specified to produce porosity.
Designers can easily maximize air flow and minimize clogging by altering the raster gaps in the
FDM toolpath. ABS-M30 and polycarbonate (PC) are the preferred materials for FDM molded
pulp packaging tooling. PC is preferred when maximum strength and stiffness are needed while
ABS-M30 is used when strength is needed along with a small degree of flex. When transfer
molds must be porous, so that a vacuum can hold the molded piece while freeing it from fiber
clogging, they are constructed using the FDM default sparse fill build style.
Transfer tool for the paper pulp
CUSTOMER STORY package.
SML Group is a leading supplier of garment trim

and various types of packaging. Based in China, How Did FDM Compare to
the company operates over 30 facilities around the Conventional Methods for SML?
world including the largest label factory in China. Method Cost Time
In the past, SML was not able to compete in the
molded pulp packaging market in the United States Conventional $30,000 2 weeks
because the time and cost involved in making Metal Tooling
conventional metal tools made it impossible to
provide a prototype to customers. “We decided FDM Tooling $600 1 week
to work with Stratasys to see if it was possible to
make an FDM packaging tool,” said Jeremy Wolf, SAVINGS $29,400 1 week Molded pulp packaging from the FDM
tool.
Structural Packaging Designer for SML. Stratasys’ (98%) (50%)
digital manufacturing service, Redeye On Demand ,
worked with SML to provide a series of different FDM
molded pulp tools in order to optimize the sparse
pattern that allows a vacuum to be drawn through the tool.“ The entire FDM tool is porous,
which spreads the vacuum suction and produces a cleaner package with a better surface finish,”
Wolf added.
“We can get an FDM tool from RedEye for about $600 in two days,” Wolf said. “At this price and
lead time and we can easily make prototypes for companies that are interested in molded pulp
packaging. Prototypes are critical because OEMs often show them to retailers that they want to
have carry the product. FDM tooling can also be used for production in quantities up to 10,000 Electronic device with complete
or so. We have used FDM tooling to produce molded pulp packages for two customers, an packaging.
electronics OEM and a retailer. FDM tooling has opened up exciting new business opportunities
by making it practical to produce molded pulp packaging in low quantities that did not make
sense in the past.”
For more information about Stratasys systems, materials and applications, call 855-693-0073 or visit www.stratasys.com
Stratasys Incorporated Stratasys GmbH

7665 Commerce Way Weismüllerstrasse 27
Eden Prairie, MN 55344 60314 Frankfurt am Main
+1 888 480 3548 (US Toll Free) Germany
+1 952 937 3000 (Intl) +49 69 420 994 30 (Tel)
+1 952 937 0070 (Fax) +49 69 420 994 333 (Fax)
www.stratasys.com www.stratasys.com
info@stratasys.com europe@stratasys.com
ISO 9001:2008 Certified

©2011 Stratasys Inc. All rights reserved. Stratasys, Fortus, Dimension, uPrint and FDM are registered trademarks and Real Parts, Fortus 360mc,
Fortus 400mc, Fortus 900mc, Finishing Touch, Insight, Control Center and FDM TEAM are trademarks of Stratasys Inc., registered in the United
States and other countries. *ULTEM 9085 is a trademark of SABIC Innovative Plastics IP BV. All other trademarks are the property of their
respective owners. Product specifications subject to change without notice. Printed in the USA. SSYS-AB-PaperPulp-04-11

Molded Paper Pulp Packaging: Make Your Ideas Real

Uploaded by

Copyright:

Available Formats

Molded Paper Pulp Packaging: Make Your Ideas Real

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Molded Paper Pulp Packaging: Make Your Ideas Real

Uploaded by

Copyright:

Available Formats

APPLICATION BRIEF:

MOLDED PAPER PULP PACKAGING

MAKE YOUR IDEAS REAL.

SML Group is a leading supplier of garment trim

Stratasys Incorporated Stratasys GmbH

ISO 9001:2008 Certified

You might also like