Bypass Level Indicator With Magnetic Display Model BNA: Applications
Bypass Level Indicator With Magnetic Display Model BNA: Applications
Bypass Level Indicator With Magnetic Display Model BNA: Applications
Applications
■ Continuous level indication without supply voltage
■ Indication of the level proportional to height
■ Individual design and corrosion-resistant materials make
the products suitable for a broad range of applications
■ Chemical industry, petrochemical industry, oil and natural
gas extraction (on- and offshore), shipbuilding, machine
building, power generating equipment, power plants
■ Process water and drinking water treatment, food and
beverage industry, pharmaceutical industry
Special features
■ Process- and procedure-specific production
■ Operating limits:
- Operating temperature: T = -196 ... +450 °C
- Operating pressure: P = Vacuum to 400 bar
- Limit density: ρ ≥ 340 kg/m3
■ Wide variety of different process connections and
materials
■ Mounting of level transmitters and magnetic switches
possible as an option
■ Explosion-protected versions
■ Simple, robust and solid design, long service life ■ In a communicating bypass chamber mounted to the side
■ Bypass chamber and float from stainless steel 1.4571, of a vessel a float moves with the level of the medium to
1.4404 or special materials be measured.
■ Pressure- and gas-tight separation between measuring ■ The magnetic field of the radial-symmetric magnetic
and display chamber system positioned in the float activates the magnetic
■ Detecting and indicating of the fill level of aggressive, display attached to the outside of the bypass chamber as
combustible, toxic, hot and highly contaminated media well as the switching and measuring elements.
■ The functioning of the magnetic display is guaranteed
even in the event of power failures
■ Applicable for all industrial applications by using various
corrosion-resistant materials
■ Continuous detection of levels, independent of physical Magnetic system
and chemical changes of the media such as: Foaming,
conductivity, dielectric, pressure, vacuum, temperature, The magnetic system is assembled from a pole disc and
vapours, condensation, bubble formation, boiling effects various magnets. These can be individually adapted to the
■ Interface-layer level measurement from ∆ density 100 kg/m3 different chamber dimensions and for temperatures up to
■ Special versions: Food-compliant, coatings, liquid gas, 450 °C.
heating jacket
Field lines
Magnets
Pole disc
Bypass chamber
Magnetic display
Connection housing
(only with magnetic
switch or level transmitter
option)
BNA-C Compact version Stainless steel 1.4571 (316Ti) 40 -196 ... +200
BNA-P Plastic version ■ PP 6 -10 ... +100
■ PVDF
BNA-H High-pressure version ■ Stainless steel 1.4571 (316Ti) 385 -196 ... +450
■ Stainless steel 1.4401/1.4404 (316/316L)
BNA-SD DUPlus version, standard ■ Stainless steel 1.4571 (316Ti) 100 -196 ... +450
■ Stainless steel 1.4401/1.4404 (316/316L)
BNA-HD DUPlus version, high pressure ■ Stainless steel 1.4571 (316Ti) 160 -196 ... +450
■ Stainless steel 1.4401/1.4404 (316/316L)
BNA-L Liquid gas/KOPlus version ■ Stainless steel 1.4571 (316Ti) 63 -196 ... +450
■ Stainless steel 1.4401/1.4404 (316/316L)
BNA-X Special materials Stainless steel 6Mo 1.4547 (UNS S31254) 250 -196 ... +450
■ Stainless steel 1.4571 (316Ti) with internal 16 Depending on medium
coating E-CTFE
■ Stainless steel 1.4571 (316Ti) with internal
coating PTFE
Titanium 3.7035 40 -10 ... +450
Hastelloy C276 (2.4819) 160 -196 ... +450
BNA-J Heating jacket version ■ Stainless steel 1.4571 (316Ti) 64 -60 ... +450
■ Stainless steel 1.4401/1.4404 (316/316L)
CE classification
X Specifications
Bypass chamber Ø 60.3 x 2 mm, max. 63 bar
Ø 60.3 x 2.77 mm, max. 100 bar
Chamber end top Pipe cap or flange connection
90
■ Vent screw
■ Vent valve
■ Vent flange
→ Options see page 17
Chamber end Flange connection
bottom ■ Drain plug
■ Drain valve
■ Drain flange
M...
X Specifications
Bypass chamber Ø 42.2 x 2 mm, max. 40 bar
Chamber end top Pipe cap, flange or threaded connection
■ Vent screw
■ Vent valve
70
■ Vent flange
→ Options see page 17
Chamber end Flange connection or threaded connection
bottom ■ Drain plug
■ Drain valve
■ Drain flange
→ Options see page 17
Process 2 x lateral (options see page 18)
M...
connections
Mounting flange ■ EN 1092-1, DN 10 ... DN 50,
PN 6 ... PN 40
■ DIN, DN 10 ... DN 50, PN 6 ... PN 40
■ Flange ANSI B 16.5, 1/2" ... 2.5",
class 150 ... class 300
Weld stub 1/2" ... 1"
Threaded bushing ■ G 1/2 ... 1
■ 1/2 ... 1 NPT
U...
X Specifications
Bypass chamber
Stainless steel Ø 60.3 x 3.91 mm, max. 160 bar
100
1.4571 Ø 76.1 x 5 mm, max. 100 bar
Ø 71 x 7.5 mm, max. 250 bar
Ø 76.1 x 10 mm, max. 385 bar
Stainless steel Ø 60.3 x 3.91 mm, max. 160 bar
1.4401/1.4404 Ø 60.3 x 5.54 mm, max. 250 bar
Ø 73 x 7.01 mm, max. 150 bar
Chamber end top Pipe cap or flange connection
M...
■ Vent screw
■ Vent valve
■ Vent flange
→ Options see page 17
Chamber end Flange connection
bottom ■ Drain plug
■ Drain valve
■ Drain flange
→ Options see page 17
Process 2 x lateral (options see page 18)
U
connections
Mounting flange ■ EN 1092-1, DN 10 ... DN 100,
PN 63 ... PN 400
■ DIN, DN 10 ... DN 100, PN 64 ... PN 400
~ 51
Specifications
Bypass chamber Ø 63 x 3 mm, max. 6 bar
Chamber end top Pipe cap or threaded connection
■ Vent screw
■ Vent valve
■ Vent flange
→ Options see page 17
Chamber end Threaded connection
bottom ■ Drain plug
■ Drain valve
■ Drain flange
→ Options see page 17
Process 2 x lateral (options see page 18)
connections
Mounting flange ■ EN 1092-1, DN 15 ... DN 50, PN 16
■ DIN, DN 15 ... DN 50, PN 16
■ Flange ANSI B 16.5, 1/2" ... 2",
class 150
Weld stub 1/2" ... 1"
Threaded bushing ■ G 1/2 ... 1
■ 1/2 ... 1 NPT
Legend
M = Centre-to-centre distance of the
process connections
U = min. 150 mm
X = according to process connection
T = min. 100 mm
Specifications Specifications
Bypass chamber Ø 60.3 x 2 mm, max. 63 bar External sensor connection
Ø 60.3 x 2.77 mm, max. 100 bar Mounting flange ■ EN 1092-1, DN 50, PN 6 ... PN 64
Chamber end top Flange connection ■ DIN, DN 50, PN 6 ... PN 64
■ Vent screw ■ ANSI B 16.5, 2" class 150 ... class 600
■ Vent valve
Female thread ■ G 3/4 ... 2
■ Vent flange ■ 3/4 ... 2 NPT
→ Options see page 17
Centre-to-centre Min. 150 mm to max. 6,000 mm
Chamber end Pipe cap or flange connection distance Larger distances on request
bottom ■ Drain plug
■ Drain valve Material ■ Stainless steel 1.4571 (316Ti)
■ Drain flange ■ Stainless steel 1.4401/1.4404
Process 2 x lateral (options see page 18) Max. nominal 100 bar
connections pressure
Mounting flange ■ DIN, DN 10 ... DN 100, PN 6 ... PN 64 Temperature range -196 ... +450 °C
■ Flange ANSI B 16.5, 1/2" ... 4", Float ■ Cylindrical float
class 150 ... class 600 ■ Corrugated float
Weld stub 1/2" ... 1" Magnetic display Standard version: < 200 °C
Threaded bushing ■ G 1/2 ... 1 High-temperature version: > 200 °C
■ 1/2 ... 1 NPT
Special versions on request
Threaded nipple ■ G 1/2 ... 1
■ 1/2 ... 1 NPT
Legend
M = Centre-to-centre distance of the
process connections
U = min. 150 mm
X = according to process connection
T = min. 100 mm
Specifications Specifications
Bypass chamber Ø 60.3 x 3.91 mm, max. 160 bar External sensor connection
Chamber end top Flange connection Mounting flange ■ EN 1092-1, DN 50, PN 6 ... PN 160
■ Vent screw ■ DIN, DN 50, PN 6 ... PN 160
■ Vent valve ■ ANSI B 16.5, 2" class 150 ... class 1,500
■ Vent flange
Female thread ■ G 3/4 ... 2
→ Options see page 17 ■ 3/4 ... 2 NPT
Chamber end Pipe cap or flange connection Centre-to-centre Min. 150 mm to max. 6,000 mm
bottom ■ Drain plug
distance Larger distances on request
■ Drain valve
■ Drain flange Material ■ Stainless steel 1.4571 (316Ti)
■ Stainless steel 1.4401/1.4404 (316/316L)
→ Options see page 17
Process 2 x lateral (options see page 18) Max. nominal 160 bar
connections pressure
Mounting flange ■ DIN, DN 10 ... DN 100, PN 64 ... PN 160 Temperature range -196 ... +450 °C
■ Flange ANSI B 16.5, 1/2" ... 4", Float ■ Cylindrical float
class 600 ... class 1,500 ■ Corrugated float
Specifications
Bypass chamber
Stainless steel Ø 88.9 x 2 mm, max. 40 bar
1.4571 Ø 88.9 x 2.9 mm, max. 40 bar
Ø 114 x 2 mm, max. 25 bar
B Ø 114 x 3.6 mm, max. 40 bar
Ø 114 x 4.5 mm, max. 40 bar
Ø 114 x 6.3 mm, max. 63 bar
Stainless steel Ø 88.9 x 2 mm, max. 40 bar
1.4401/1.4404 Ø 88.9 x 3.05 mm, max. 40 bar
Ø 114 x 2 mm, max. 25 bar
C
Ø 114 x 3.05 mm, max. 40 bar
Ø 114 x 6.02 mm, max. 63 bar
Chamber end top Flange connection
■ Vent screw
■ Vent valve
■ Vent flange
→ Options see page 17
D
Chamber end Flange connection
bottom ■ Drain plug
■ Drain valve
■ Drain flange
→ Options see page 17
Process 2 x lateral (options see page 18)
E
connections
Mounting flange ■ EN 1092-1, DN 10 ... DN 100,
PN 6 ... PN 63
■ DIN, DN 10 ... DN 100, PN 6 ... PN 64
■ Flange ANSI B 16.5, 1/2" ... 4",
class 150 ... class 600
F Weld stub 1/2" ... 1"
Threaded bushing ■ G 1/2 ... 1
■ 1/2 ... 1 NPT
01
Float Cylindrical float
KOPlus version
1000-2000 8000-12000
ated
B 2
IM
020
1 2 3 4 5 Magnetic display
6 Standard
7 version: < 200 °C
8
E 1
9
2 5
X Specifications
Bypass chamber
Titanium 3.7035 Ø 60.3 x 2 mm, max. 16 bar
100
Ø 60.3 x 2.77 mm, max. 40 bar
Hastelloy C276 Ø 60.3 x 2.77 mm, max. 50 bar
Ø 60.3 x 3.91 mm, max. 160 bar
Stainless steel Ø 60.3 x 2.77 mm, max. 50 bar
6Mo 1.4547 Ø 60.3 x 3.91 mm, max. 160 bar
(UNS S31254) Ø 60.3 x 5.54 mm, max. 250 bar
Chamber end top Pipe cap or threaded connection
M...
■ Vent screw
■ Vent valve
■ Vent flange
→ Options see page 17
Chamber end Flange connection
bottom ■ Drain plug
■ Drain valve
■ Drain flange
→ Options see page 17
Process 2 x lateral (options see page 18)
U
connections
Titanium 3.7035 Mounting flange
■ EN 1092-1, DN 10 ... DN 100,
PN 6 ... PN 63
~ 51
~ 63
Specifications
X
Bypass chamber Ø 64 x 2 mm, max. 16 bar
~ 35
Chamber end top Flange connection
■ Vent flange
→ Options see page 17
130/150
Chamber end bottom Flange connection
■ Drain flange
→ Options see page 17
Process connections 2 x lateral (options see page 18)
Mounting flange ■ EN 1092-1, DN 10 ... DN 50,
PN 6 ... PN 16
■ DIN, DN 10 ... DN 50, PN 6 ... PN 16
■ Flange ANSI B 16.5, 1/2" ... 4",
M = ...
Legend
M = Centre-to-centre distance of
the process connections
U = min. 200 mm
A
A X = ... Specifications
Bypass chamber Ø 70 x 2 mm, max. 10 bar
Alle Rechte sowie Rechte zur Anmeldung von Patenten und anderen Schutzrechten vorbehalten.
< 2,500 mm
Overall pipe length Bypass chamber separated by flange
> 2,500 mm connection
Material Stainless steel 1.4571 with internal
coating PTFE
Max. nominal 10 bar
pressure
D
Temperature range Depending on medium
Float Cylindrical float
Bearbeitung-57
Workflow
REVISION
DANZEIM language
Geradheits-,Ebenheits- und Parallelitätstoleranzen
GER/ENG ISO 801
26.11.2020 E 1 1,5 2 3 4 5 - - -
© by KSR 1 2 3 4 5 6
X Specifications
Bypass chamber Ø 60.3 x 2 mm, max. 40 bar
Ø 60.3 x 2.77 mm, max. 64 bar
Heating jacket pipe Ø 70 x 2 mm
80
Chamber end top Pipe cap
■ Vent screw
■ Vent valve
■ Vent flange
→ Options see page 17
Chamber end Flange connection
M ...
1 2 3 4
Pipe cap without Pipe cap with Flange connection with Flange connection
venting vent screw G 1/2" vent screw G 1/2" e.g. sealing faces
groove/tongue per DIN 2512
5 6 7 8
Pipe cap with vent Flange connection Pipe cap with vent valve Flange connection
flange Vent flange with vent valve
9 10 11 12 13
Flange connection Flange connection e.g. Flange connection Flange connection Flange connection
with drain plug sealing faces groove/tongue with drain nozzle with drain valve with drain flange
G/NPT 1/2" per DIN 2512 with drain plug
G 1/2"
14 15 16 17 18
Welding neck flange Blind flange Threaded coupling GN ... Threaded coupling GM ... Weld stub S ...
up to DN 25 above DN 32 (male thread) (female thread)
19 20 21 22
Standard version 1 lateral process connection 2 process connections per 2 vertical process
Process connections 2 x lateral 1 vertical process connection DIN 11851 connections (top/bottom)
(top) Lower process connection Option: Support bracket
via eccentric reducer
For detailed information on floats, magnetic displays, level transmitters (reed chain and magnetostrictive) and magnetic
switches see the following data sheets:
■ Float; model BFT; see data sheet LM 10.02
■ Magnetic display; model BMD; see data sheet LM 10.03
■ Reed level transmitter; model BLR; see data sheet LM 10.04
■ Magnetostrictive level transmitter; model BLM; see data sheet LM 10.05
■ Magnetic switch; model BGU; see data sheet LM 10.06
© 09/2010 WIKA Alexander Wiegand SE & Co. KG, all rights reserved.
The specifications given in this document represent the state of engineering at the time of publishing.
We reserve the right to make modifications to the specifications and materials.