2

Single-Wall
Eastern Sheet Metal ROUND
SINGLE-WALL ROUND SPIRAL DUCT AND FITTINGS CONSTRUCTION STANDARDS
Positive Pressure

Gauge selection for galvanized steel (ASTM A 653), paint grip steel, type 304 and 316 stainless steel,
and Eastern Polyvinyl Chloride Coated Steel (PCS).*
Fittings are spot welded and/or gorelocked through 40” diameter. All larger fittings are continuously welded except for
PCS fittings. All fittings can be provided as continuously welded if required. All galvanized and PCS spiral duct 6” and
larger is corrugated unless ordered without corrugations. Smaller sizes may also be corrugated. Check with the plant
when ordering. All spiral duct from other materials will not be corrugated.

2005 SMACNA 10” WG 1995 SMACNA 2” WG 1995 SMACNA 10” WG

DUCT SPIRAL SPIRAL SPIRAL
DIAMETER DUCT FITTINGS DUCT FITTINGS DUCT FITTINGS
3”-6” 26 26 26 26 26 26
7”-8” 26 26 26 26 26 26
9”-10” 26 26 26 26 26 26
11”-12” 26 26 26 26 26 24
13”-14” 26 26 26 26 26 24
15”-16” 26 26 24 24 24 22
17”-18” 26 26 24 24 24 22
19”-24” 26 24 24 24 24 22
25”-26” 24 22 24 24 24 22
27”-36” 24 22 24 22 22 20
37”-42” 24 22 22 20 22 20
43”-48” 22 20 22 20 20 20
49”-50” 22 20 22 20 20 20
51”-60” 22 20 20 18 18 18
61”-66” 22 18 18 16 18 16
67”-84” 20 18 18 16 18 16

1985 SMACNA 2” WG 1985 SMACNA 10” WG 1975 SMACNA 10” WG

DUCT SPIRAL SPIRAL SPIRAL
DIAMETER DUCT FITTINGS DUCT FITTINGS DUCT FITTINGS
3”-8” 26 26 26 24 26 20
9”-14” 26 26 26 24 26 20
15”-26” 24 24 24 22 24 20
27”-36” 24 22 22 20 22 20
37”-50” 22 20 20 20 20 18
51”-60” 20 18 18 18 18 18
61”-84” 18 16 18 16 18 16

Gauge selection for aluminum type 3003.

Fittings are spot welded and/or gorelocked through 40” diameter. All larger fittings are continuously welded.
All fittings can be provided as continuously welded if required. Brown & Shapre gauge listed in parentheses.
2005 SMACNA 2” WG: POSITIVE 2005 SMACNA 2” WG: NEGATIVE
DUCT SPIRAL SPIRAL
DIAMETER DUCT FITTINGS DUCT FITTINGS
3”-8” 0.025” (22) 0.032” (20) 0.025” (22) 0.040” (18)
9”-14” 0.025” (22) 0.032” (20) 0.032” (20) 0.040” (18)
15”-26” 0.032” (20) 0.040” (18) 0.040” (18) 0.050” (16)
27”-36” 0.040” (18) 0.050” (16) 0.050” (16) 0.063” (14)
37”-50” 0.050” (16) 0.063” (14) 0.063” (14) 0.080” (12)
51”-60” 0.063” (14) 0.080” (12) consult 0.090” (11)
factory
61”-84” consult 0.090” (11) consult consult
factory factory factory
* Because of the limitations of the construction methods we can use, Eastern PCS may require additional sealing in the field.
While the use of this type of material is widespread, ESM urges engineers to always consider the use of stainless steel whenever
possible for systems other than underground.
Eastern PCS is not recommended for use in high visibility exposed applications. Please refer to the Eastern PCS Product Guide
for more information.

Eastern Sheet Metal • 800 348 3440 • www.easternsheetmetal.com