Energy End Use Buildings
Energy End Use Buildings
Energy End Use Buildings
Review Editor
Eberhard Jochem (Fraunhofer Institute for Systems and Innovation Research, Germany)
649
Energy End-Use: Buildings Chapter 10
Contents
10.1.2 The Role of Buildings in Global and National Energy Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 657
10.1.3 The Demand For Different Energy Services In Buildings And Their Drivers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 657
10.1.4 Indirect Energy Use from Activities in Buildings in Detail Using the Life Cycle Assessment Approach . . . . . . . . . . . . . . . . . . . . . . . . . 664
10.1.5 The Impact of a Changing Climate on Building Energy Service Demand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 669
10.2.2 Indoor Air Quality and Health Impacts of Air Tightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 670
10.4.2 Urban-Scale Energy Systems, Urban Design, and Building Form, Orientation, and Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 676
10.4.3 Options Related to Building-Scale Energy Systems and to Energy Using Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 678
650
Chapter 10 Energy End-Use: Buildings
10.5 Barriers Toward Improved Energy Efficiency and Distributed Generation in Buildings . . . . . . . . . . . . . . 698
10.5.6 Barriers Related to Energy Efficiency Options in Buildings in Developing Countries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 703
10.6 Pathways for the Transition: Scenario Analyses on the Role Of Buildings in a
Sustainable Energy Transition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 703
10.6.2 Description of the GEA Building Thermal Energy Use Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 704
10.7.2 The Importance of Non-energy Benefits as Entry Points to Policymaking and Decision Making . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 719
10.7.3 Typology of Benefits Of Energy Efficiency And Building-Integrated Renewable Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 719
651
Energy End-Use: Buildings Chapter 10
10.7.9 Worldwide Review of Studies Quantifying the Impact of Benefits Related to Energy Savings in the Built
Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 722
10.8.4 Policy Instruments Addressing Selected Barriers and Aspects Toward Improved Energy Efficiency in Buildings . . . . . . . . . . . 734
References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 745
652
Chapter 10 Energy End-Use: Buildings
Executive Summary
Buildings are key to a sustainable future because their design, construction, operation, and the activities in buildings
are significant contributors to energy-related sustainability challenges – reducing energy demand in buildings can play
one of the most important roles in solving these challenges. More specifically:
• The buildings sector1 and people’s activities in buildings are responsible for approximately 31% of global final energy
demand, approximately one-third of energy-related CO2 emissions, approximately two-thirds of halocarbon, and
approximately 25–33% of black carbon emissions.
• Several energy-related problems affecting human health and productivity take place in buildings, including mortality
and morbidity due to poor indoor air quality or inadequate indoor temperatures. Therefore, improving buildings and
their equipment offers one of the entry points to addressing these challenges.
• More efficient energy and material use, as well as sustainable energy supply in buildings, are critical to tackling
the sustainability-related challenges outlined in the GEA. Recent major advances in building design, know-how,
technology, and policy have made it possible for global building energy use to decline significantly. A number of low-
energy and passive buildings, both retrofitted and newly constructed, already exist, demonstrating that low level of
building energy performance is achievable. With the application of on-site and community-scale renewable energy
sources, several buildings and communities could become zero-net-energy users and zero-greenhouse gas (GHG)
emitters, or net energy suppliers.
Recent advances in materials and know-how make new buildings that use 10–40% of the final heating and cooling
energy of conventional new buildings cost-effective in all world regions and climate zones. Holistic retrofits2 can
achieve 50–90% final energy savings in thermal energy use in existing buildings, with the cost savings typically
exceeding investments. The remaining energy needs can be met at the building- and community-level from distributed
energy sources or by imported sustainable energy supply. The mix of energy-demand reductions, on-site renewable
energy generation, and off-site renewable energy supply that corresponds to the most sustainable solution and
minimizes the total cost needs to be evaluated case by case, applying a full system life cycle assessment. Net zero-
energy buildings and communities3 are possible only for select building types and settlement patterns, mainly low-rise
buildings and less densely populated residential areas. However, their economics are presently typically unfavorable,
as opposed to high-efficiency buildings. Meanwhile, compact medium-rise and high-rise developments offer many
advantages, such as reduced surface-to-volume ratios and typically lower energy service demands due to the higher
density and concentration of building uses.
The scenarios constructed by the GEA buildings expert team, in concert with the GEA main pathways, demonstrate that
a reduction of approximately 46% of the global final heating and cooling energy use in 2005 is possible by 2050 (see
Figure 10.1). This is attainable through the proliferation of today’s best practices in building design, construction, and
operation, as well as accelerated state-of-the-art retrofits. This is achievable while increasing amenity and comfort and
without interceding in economic and population growth trends and the applicable thermal comfort and living space
increase. It goes hand in hand with the eradication of fuel poverty – i.e., supplying everyone with sufficient thermal
1 The GEA refers to energy use in the buildings sector as all direct energy use in buildings, including appliances and other plug loads, and account-
ing for all electricity consumption for which activities in buildings are responsible. Embodied energy use, emissions of the production of building
materials, and their transport to the construction site, and other equipment are not included.
2 Holistic retrofit refers to a major renovation of a building involving a complex of various energy efficiency measures. It is the opposite to a stepwise
renovation, when, first, some parts of the building are renovated (e.g., windows), later other parts (e.g., insulation), etc.
3 Net zero energy buildings (communities) are buildings (communities) that consume as much energy as they produce from renewable energy
sources within a certain period of time (usually one year)
653
Energy End-Use: Buildings Chapter 10
20 400
18 350
16
300
14
-46% +126%
250
12
PWh/yr
109 m2
10 200
8 150
6
100
4
50
2
0 0
2005 2010 2015 2020 2025 2030 2035 2040 2045 2050 2005 2010 2015 2020 2025 2030 2035 2040 2045 2050
2005 Standard Standard new Standard retrofit Advance new Advance retrofit
Figure 10.1 | Global final building heating and cooling energy use4 until 2050 in the state-of-the-art scenario (corresponding roughly to the “GEA Efficiency” set of pathways)
(left), contrasted to global floor area (on the right) projections.
comfort. Reaching these state-of-the-art energy efficiency levels in buildings requires approximately US$14.2 trillion in
undiscounted additional cumulative investments (US$18.6 trillion with no technology learning) until 2050. However,
these investments return substantially higher benefits, e.g., approximately US$58 trillion in undiscounted energy cost
savings alone during the same period.
Present and foreseen cutting-edge technologies can reduce energy use of new appliances, information and
communication technology (ICT), and other electricity-using equipment in buildings by 65% by 2020, as compared to the
baseline. Longer-term projections of technology improvements are speculative, but likely to provide significant additional
improvement. Through lifestyle, cultural, and behavioral changes, further significant reductions could be possible.
However, the scenario work also demonstrates that there is a significant lock-in risk. If building codes are introduced
universally and energy retrofits accelerate, but policies do not mandate state-of-the-art efficiency levels, substantial
energy use and corresponding GHG emissions will be “locked in” for many decades. Such a scenario results in an
approximately 33% increase in global building energy use by 2050 compared to 2005, as opposed to a 46% decrease –
i.e., an approximately 79% lock-in effect relative to 2005. This points to the importance of building shell-related policies
being ambitious about the efficiency levels they mandate (or encourage). Figure 10.2 illustrates opportunities offered by
a state-of-the-art scenario as well as the lock-in risk for the 11 GEA regions.
A future involving highly energy-efficient buildings can result in significant associated benefits, typically with
monetizable benefits at least twice the operating cost savings, in addition to non-quantifiable or non-monetizable
benefits now and avoided impacts of climatic change in the future. One of the most important future benefits is
mitigation of the building sector’s contribution to climate change. Other benefits include: improvements in energy
security and sovereignty; net job creation; elimination of or reduction in indoor air pollution-related mortality and
4 In Chapter 10 energy use is measured in kWh, as it is the most commonly used metrics for the buildings sector. In order to convert kWh to kJ,
please, follow the rule: 1 kWh = 3600 kJ.
654
Chapter 10 Energy End-Use: Buildings
WORLD
4 FSU
20
4 EEU 3
-66% -46%
PWh
4
WEU 3 2 15 79%
NAM 72%
PWh
PWh
-72% 2 1 10
3
-75% -67% 75% 0
PWh
4
2 1 5
3 46% 2005 2050
PWh
50% 1 0 CPA
2 0
1 0 2005 2050 4 -54% 2005 2050
0 2005 2050 3 76%
PWh
2005 2050 4 2
MEA SAS
3 4 1
PWh
2 3 0
PWh
1 +127% 375% 2
+175% 201% 2005 2050
1 4
0 PAS
0 3
2005 2050
PWh
4 LAC 2005 2050 2
4 AFR 157%
+113%
PWh
3 1
3
0
PWh
2 2
1 +15% 181% 1 +46% 189% 2005 2050
4 PAO
Energy use in 2005 0 0
3
2005 2050
PWh
Energy use in 2050. state of the 2005 2050
2
art scenario -66% 41%
1
Energy use in 2050. sub-opmal
scenario 0
% Lock-in 2005 2050
% Change in State of the Art in
relaon to 2005
Figure 10.2 | Final building heating and cooling energy demand scenarios until 2050: state-of-the-art (~corresponding roughly to the GEA Efficiency set of pathways) and
sub-optimal (~corresponding roughly to the GEA Supply set of pathways) scenarios, with the lock-in risk (difference).
Note: Green bars, indicated by red arrows and numbers, represent the opportunities through the state-of-the-art scenario, while the red bars with black numbers show the size
of the lock-in risk (difference between the two scenarios). Percent figures are relative to 2005 values.
morbidity; other health improvements and benefits; alleviation of energy poverty and improvement of social welfare;
new business opportunities, mostly at the local level; stimulation of higher skill levels in building professions and trades;
improved values for real estate and enhanced ability to rent; and increased comfort, well-being, and productivity.
A survey of quantitative evaluations of such multiple benefits shows that even a single energy efficiency initiative
in buildings in individual countries or regions has resulted in benefits with values ranging in the billions of dollars
annually, such as health improvement-related productivity gains and cost aversions. At the same time, the market-
based realization of significant, mostly cost-effective efficiency opportunities in buildings is hampered by a wide range
of strong barriers. These barriers are highly variable by location, building type, and culture, as well as by stakeholder
groups, such as planners, architects, craftsmen, investors, house and building users, and supervisors. Technological and
human capacities of change need to be considered together, as it is through individual and organizational decisions
that technologies are provided, adopted, and used. Analysis and examples in this chapter show that most of these
barriers can be overcome or mitigated through policies, measures, and innovative financing schemes. A broad portfolio
of instruments is available and has been increasingly applied worldwide to capture cost-effective efficiency and
conservation potential and to tap other sustainable energy opportunities. Due to the large number and diversity of
barriers, single instruments such as a carbon price will not unlock the large efficiency potential, but policy portfolios,
tailored to different target groups and tailored to a specific set of barriers, are necessary to optimize results.
Among policy instruments, stringent, continuously updated, and well-enforced building and appliance standards, codes,
and labeling – applied also to retrofits – are particularly effective in achieving large energy savings, mostly highly
cost-effectively. In order to achieve the major building energy use reductions that have been shown to be possible
in this chapter, an urgent introduction of strong building codes mandating near-zero-energy performance levels and
progressively improving appliance standards, as well as the strong promotion of state-of-the-art efficiency levels in
655
Energy End-Use: Buildings Chapter 10
accelerated retrofits in existing building stocks, are crucial. In contrast, net-zero-energy building mandates are not
the most sustainable, cost-effective, or even feasible solutions in many cases, such as dense urban zones or large
commercial buildings, and may only encourage urban sprawl. Thus the introduction of such mandates and commitments
should be carefully analyzed and, in some cases, re-examined.
For ICT and entertainment appliances, regulation also needs to tackle the durability of the equipment in addition to
its operational energy use due to the high-embodied GHG emissions. Appropriate energy pricing is fundamental, and
taxation provides the impetus for a more rational use of energy sources. In poor regions or population segments,
subsidies enabling a highly energy efficient capital stock can be more effective in tackling energy poverty than energy
price subsidies. Carefully designed subsidies enabling investments may be needed to bridge the discount rate gap
between society and private decision-makers, and the availability of financing for building owners and users is often a
crucial precondition. Innovative financing schemes, such as performance contracting, are paramount for groups with
limited access to financing. Carbon prices need to be very high (above US$60/tCO2) and sustained over a long period
to achieve noticeable demand effects in the buildings sector. However, in order for energy price signals to be effective
and sensible, energy price subsidies need to be removed so that the technology and fuel pricing environment provides
a level playing field for sustainable energy options to be feasible. Awareness campaigns, education, and the provision
of more detailed and direct information, including smart metering, enhance the effectiveness of other policies and
enable behavioral changes.
A combination of sticks (regulations), carrots (incentives), and tambourines (measures to attract attention such as
information or public leadership programs) has the greatest potential to increase energy efficiency in buildings by
addressing a broader set of barriers. Achieving a transformation in the buildings sector that is in concert with ambitious
climate stabilization targets by the mid-century entails massive capacity building efforts to retrain all trades involved in
the design and construction process, as well as consumers, building owners, operators, and dwellers.
A transition into a very low building energy future requires a shift in focus of energy sector investment from the
supply-side to end-use capital stocks, as well as the cultivation of new innovative business models, such as performance
contracting and Energy Service Companies.
Novelties in this chapter, as compared to previous assessments, include (1) a focus on energy services, as well as life
cycle approaches accounting for trade-offs in embodied vs. operational energy and emissions; (2) applying a holistic
framework toward building energy use that recognizes buildings as complex, integrated systems; (3) presenting new
global and regional building energy use scenarios until 2050, using a novel performance-based global building thermal
energy model; (4) recognizing the importance of the lock-in effect and quantifying it; (5) in-depth attention to non-
technological opportunities and challenges; (6) a large database on quantified and monetized co-benefits; and (7) a
critical assessment of zero-energy buildings and related policies.
656
Chapter 10 Energy End-Use: Buildings
10.1 Setting the Scene: Energy Use in collected from different sources for the model presented in Section
Buildings 10.6. Because sources of building energy vary greatly, e.g., significant
amounts of coal and biomass burned on site in China and India and a
10.1.1 Key Messages much higher share of electricity in other countries, this results in large
differences in primary energy use because of the additional energy
Almost 60% of the world’s electricity is consumed in residential and demands of power generation and distribution.
commercial buildings. At the national level, energy use in buildings typ-
ically accounts for 20–40% of individual country total final energy use, However, policies to address sustainability challenges of energy services
with the world average being around 30%. Per capita final energy use in rendered in buildings can often only be designed optimally if a life cycle
buildings in a cold or temperate climate in an affluent country, such as approach is used for energy accounting and not only the direct energy
the United States and Canada, can be 5–10 times higher than in warm, use is optimized. For instance, there are trade-offs between minimiz-
low-income regions, such as Africa or Latin America. ing operational energy use and embodied energy in building materials;
these trade-offs in greenhouse gas emissions can be even larger. For
example, reducing CO2 emissions through increased Styrofoam insula-
10.1.2 The Role of Buildings in Global and National tion increases hydrochlorofluorocarbon (HCFC) emissions, potentially
Energy Use resulting in increased rather than decreased overall greenhouse gas
emissions when measured in CO2 equivalents. Further trade-offs exist
Energy services in buildings – the provision of thermal comfort, refriger- in cooking energy use and embodied energy in foodstuffs. Reduction
ation, illumination, communication and entertainment, sanitation and in certain energy service demands in buildings results in the reduction
hygiene, and nutrition, as well as other amenities – are responsible for a of energy use of other sectors, such as electricity transformation losses,
significant share of energy use worldwide. The exact figure depends on transportation (such as for building materials, water, food, etc.), or
where system boundaries are drawn. The global direct total final energy industrial energy use (needed for products and appliances in buildings).
use in buildings was 108 EJ in 2007 and resulted in emitting 8.6 GtCO2e Therefore, building-related energy services can only be optimized if a
(IPCC, 2007), 33% of global energy-related CO2 emissions (IEA, 2008a). systemic, life cycle approach is used to reduce associated total primary
Globally, biomass is the most important energy carrier for energy use in energy use and associated environmental impacts. Unfortunately, glo-
buildings, followed by electricity, natural gas, and petroleum products. bal building energy use and emission data using a life cycle approach
Almost 60% of the world’s electricity is consumed in residential and do not exist, but smaller-scale data on life cycle building energy use is
commercial buildings (IEA 2008a). In addition to the energy consumed presented below. As buildings are the end-point of a large share of our
directly in buildings, primary energy is lost in the conversion to electricity energy using activities – for example, a large share of products manu-
and heat and petroleum products, and the transport and transmission of factured in industry are ultimately for the purpose of providing various
energy carriers cost energy. In addition, the construction, maintenance services in buildings and many goods being transported are being used
and demolition of buildings requires energy, as do the manufacturing of in buildings – reducing service needs requiring energy input in buildings
furniture, appliances, and the provision of infrastructure services such is key to achieve a reduction in overall primary energy use. When a life
as water and sanitation. The use of this indirect or embodied energy is cycle approach is applied to understand the energy services demanded,
influenced by the level and design of energy service provision in build- the importance of buildings grows substantially.
ings. While comprehensive global statistics on indirect energy cost of
buildings do not exist, regional data are presented below.
10.1.3 The Demand For Different Energy Services In
At the national level, direct energy use in buildings typically accounts Buildings And Their Drivers
for 20–40% of individual country’s total final energy use (see Table
10.1), with the world average being 31%. In terms of absolute 10.1.3.1 Key Messages
amounts, there is a significant variance among different world regions.
Per capita final energy use in buildings in a cold or temperate climate Energy is used in buildings to provide a variety of services, including
in affluent countries, such as the United States and Canada, can be comfort and hygiene, food preparation and preservation, entertainment,
5–10 times higher than in warm, low-income regions, such as Africa and communications. The type and level of service and the quantity and
or Latin America (Table 10.1). Figure 10.A.1 in the online appendix type of energy required depend on the level of development, culture,
and Figure 10.3 provide further information on the characteristics of technologies, and individual behavior. Global trends are toward elec-
building energy use by region or representative countries. Figure 10.4 trification and urbanization, including toward multi-family from single-
shows total final energy use in buildings per capita in different world family dwellings. At all levels, large variations in cultural attitudes,
regions, according to the International Energy Agency (IEA) statis- individual behaviors, and the selection of construction materials and
tics. Figure 10.5 shows final energy use per square meter for thermal practices, fuels, and technologies contribute to a wide range of energy
comfort by world region and building type, according to input data services and energy use.
657
Energy End-Use: Buildings Chapter 10
Table 10.1 | Contribution of the buildings sector to the total final energy demand globally and in selected regions in 2007.
Building site energy consumption, 2003 Residential building’s site energy by fuel, 2003
heat
12,000 100%
Commercial
10,000 electricity
80%
Primary AEC (TWh)
Residential
8,000 biomass
60%
6,000 natural gas
40%
4,000 petroleum
2,000 20%
coal
0 0
Brazil China India EU-15 Japan US Brazil China India EU-15 Japan US
Building primary energy consumption, 2003 Commercial building’s site energy by fuel
heat
100%
12,000
Commercial electricity
10,000 80%
Primary AEC (TWh)
Residential biomass
8,000 60%
natural gas
6,000
40%
4,000 petroleum
20%
2,000 coal
0 0
Brazil China India EU-15 Japan US Brazil China India EU-15 Japan US
Figure 10.3 | Building final and primary energy use in selected countries in 2003; AEC = annual energy consumption. Source: WBCSD, 2008.
10.1.3.2 Building Energy Demand by Service Type national and regional assessments. Figure 10.6 shows the breakdown of
primary energy use in commercial and residential buildings by end-use
The type and level of service and quantity and type of energy required services in the United States. The figure demonstrates that five energy
depend on a large number of factors, including culture, technologies, services accounted for 86% of primary energy use in buildings in 2006.
and individual behavior. This section includes a review of national and These were: (1) thermal comfort – space conditioning that includes space
regional assessments conducted to understand the importance of differ- heating, cooling and ventilation – 36%; (2) illumination – 18%; (3) sani-
ent energy services in buildings. No global systematic studies have been tation and hygiene, including water heating, washing and drying clothes,
performed to understand the importance of different energy services in and dishwashing – 13%; (4) communication and entertainment – elec-
buildings or other sectors, and therefore this section covers a selection of tronics including televisions, computers, and office equipment – 10%;
658
Chapter 10 Energy End-Use: Buildings
Former USSR
EU-27 9000
9000
OECD North America
6000
9000 6000
3000
6000 3000
China
0 9000
3000 0
Middle East 6000
0 9000
3000
6000
0
3000
Asia excluding China
0 9000
Africa 6000
Latin America 9000
3000
9000
6000
0
6000
3000 OECD Pacific
3000 9000
0
0 6000
3000
Residential sector 0
Figure 10.4 | Total annual final energy use in the residential and commercial/public sectors, building energy use per capita by region and building type in 2007 (kWh/capita/
yr). Source: data from IEA Online Statistics, 2007.
300 Eastern
Europe 300 Former
North Soviet Union
300 Western 200
America 300 200
Europe
200 100
200 100
100 0
100 0
0 Middle East 300 Centrally
0 South Asia
300 300 Planned Asia
200
200 200
100
100 100
0
0 0 Pacific Asia
300
Africa 200
Latin America 300
300
100
200
200
0
100 Pacific OECD
100
300
0
0
200
Single family 100
Multi family
Commercial and public 0
Figure 10.5 | Final heating and cooling specific energy consumption by region and building type in 2005 (kWh/m2/yr). Source: Model estimations (see Section 10.7).
and (5) provision of food, refrigeration and cooking – 9% (US DOE, 2008). fuel final energy5 in buildings. In developing countries (non-OECD mem-
The remaining 14% includes residential small electric devices, heating ber states), they account for 93% of site electricity and 78% of fuel use,
elements, motors, natural gas outdoor lighting, and commercial service respectively. According to the best available figures (IEA, 2006), house-
station equipment, telecommunications equipment, medical equipment, hold energy use in developing countries contribute almost 10% of the
pumps, and combined heat and power in commercial buildings. world primary energy demand. Household use of biomass in developing
countries alone accounts for almost 7% of world primary energy demand.
Recently, McNeil et al. (2008) made an estimate of the current and pro-
jected end-use energy demand in buildings for ten separate regions cov-
5 Includes natural gas, bottled gas (LPG), and fuel oil. Does not include coal or bio-
ering the world. In the OECD member states, it was found that the five mass, and excludes district heating, which is significant in China, Europe, and the
energy services listed above use 76% of the electricity and 69% of the Former Soviet Union.
659
Energy End-Use: Buildings Chapter 10
Figure 10.6 | Primary energy use in US commercial and residential buildings in 2010. Source: US EIA, 2011; 2012.
Valuable time and effort are devoted to fuel collection instead of edu- (percent of population having access to electricity); and (4) income, which
cation or income generation. While a precise breakdown is difficult, the is a strong determinant of the set of services and end-uses for which
main use of energy in households in developing countries is for cook- commercial energy is used and the quantity and size of energy-using
ing, followed by heating and lighting. Because of geography and climate, equipment; (5) level of development; (6) cultural features; (7) level of
household space- and water-heating needs are small in these countries. technological development; and (8) individual behavior. Availability and
financial aspects of technologies and energy carriers are also important.
A review of national level studies of household energy services, analyzed
on a life cycle basis, is presented in Figure 10.7. Buildings-related energy The demand for energy services in buildings varies among regions accord-
use contributes 60–70% of the total household energy use in OECD coun- ing to geography, culture, lifestyle, climate, and the level of economic
tries (Hertwich, 2005b) and up to 90% in India (Pachauri and Spreng, development. It also varies by the type of use, type of ownership, age,
2002; see also Box 10.1 and Figure 10.8). The remainder of household and location of buildings (e.g., residential or commercial, new or existing
energy use is mostly related to mobility. On average across studies for a buildings, private or public, rural or urban, leased or owner-occupied)
selected number of countries where data was available, buildings-related (Chakravarty et al., 2009). There are also significant differences in energy
energy use, including the primary energy required to produce the energy services among commercial subsectors – such as offices, retail, restau-
carriers used in the household, accounts for 32% of the total household rants, hotels, and schools – and between single- and multifamily resi-
energy requirements. “Other shelter,” which includes water and waste dential buildings. Different approaches, standards and technologies to
treatment utilities and construction and maintenance of buildings and how the buildings are sited, designed, constructed, operated, and utilized
furniture, accounts for 11%. Mobility accounts for 24%, food for 14%, strongly affect the amount of energy used within buildings.
recreation for 7%, clothing for 4%, and other for 9%. Variation in the
importance of different categories, however, is substantial. Additional life The level of economic development is a main driver of the global differ-
cycle effects of building energy use are considered in Section 10.1.4. ences in energy use in buildings as set out in the previous sections. Table
10.1 shows that energy use per capita in buildings is up to an order of
magnitude higher in North America than in most of Asia, Africa, and
10.1.3.3 Variations in Energy Service Needs and Key Drivers Latin America. This section sets out some more detailed differences, and
their drivers, among countries as well as within individual countries.
The following factors are major contributors to changing energy service
demands: (1) population growth; (2) urbanization; (3) shift from bio- Figure 10.9 shows there are differences in per capita energy use among
mass to commercially available energy carriers, especially electrification six developed countries, at similar affluence levels (IEA, 2007b). The data
660
Chapter 10 Energy End-Use: Buildings
3.7 5.3 2.0 1.5 2.0 2.5 0.4 2.8 2.4 3.2 3.5 2.7 4.1 1.7 3.9 6.3 10 11 9.2 4.3 <= Rate of energy
100 % use (kW/capita)
90 %
80 % Other
Recreation
Share of consumption category
70 %
Other mobility
60 % Vehicle fuel
Care
50 %
Clothing
40 %
Food
30 % Other shelter
Household energy
20 %
10 %
0%
AT 2000
AUS 1993-94
Brazil 1995
Beijing 2005
DE 1988
DK 1992
India 1993-94
JP 1995 T
JP 1995 N
NL 1990
NL 1996
NO 1973
NO 1997
NZ 1980
SE 1996
USA 1960-61
USA 1972-73
USA 1997
USA 2002
UK 1996
Figure 10.7 | Share of consumption categories in total energy use based on life-cycle analysis or input-output calculation and rate of annual energy use in kilowatt per capita
(numbers on top of the columns). Source: Hertwich, 2011.
are “degree day normalized,” i.e., corrected for the key climatic driver of This section provides more examples and highlights further issues. For
heating demand. The overall energy use is higher in the United States, instance, cooking energy demand varies largely with dietary choices.
even by developed country standards, but lower in Japan, and inter- The use of refrigerated, packed, and tinned food is very limited in devel-
mediate in Europe and Canada. The variation between end-uses is large. oping countries which leads to larger energy use for cooking. In rural
For instance, space-heating demand follows the same broad pattern as China, similar to many other developing countries, cooking is the largest
the total use and is driven largely by per capita floor area and build- energy demand item for 60% of families.
ing internal temperatures (IEA, 2007b). Other end-uses are relatively
less important, but there are substantial differences, notably the higher A major source of variation in energy services and energy use is the
energy use in lighting and appliances in North America. The figure also impact of habits and behavior (see Section 10.4.8), irrespective of level
illustrates the role of culture in determining energy efficiency. Japan of development. Within all countries, high-income groups contribute dis-
uses less than a third of the energy used in the United States for space proportionately to energy demand (Chakravarty et al., 2009). However,
heating, even when normalized for climate. This is due to more com- income is not the only factor. Lenzen et al. (2006) investigated the vari-
pact living, as well as focusing on providing thermal comfort through ation of energy use with household income and size, type of house,
alternative means rather than universal heating of all living space. The urban versus rural location, education, employment status, and age of
Japanese kotatsu, a table frame heat source which is combined with the householder in several countries. Higher income social groups use
blankets and adaptive clothing, is still a common alternative despite more energy per capita, with the elasticity of energy expenditure ran-
high affluence levels. ging from 0.64 in Japan to 1.0 in Brazil. Lenzen et al. (2006) also found
that energy use differs across countries even after controlling for the
main socioeconomic and demographic variables, including income. This
10.1.3.4 Cultural, Social and Behavioral Drivers result confirms previous findings that the characteristics of personal
energy use are partly determined by distinctive features such as histor-
Culture, values, and individual habits significantly influence consump- ical events – for example, energy supply shortages or the introduction
tion, as does the choice of technologies. The section above provided of taxes, socio-cultural norms, behavior, and present market conditions,
an example for heating energy use determined by culture in Japan. as well as energy and environmental policy measures.
661
Energy End-Use: Buildings Chapter 10
In India, energy end use in buildings varies largely across income groups, building construction typology, climate, and several other
factors. The energy sources utilized by the residential sector in India mainly include electricity, kerosene, liquefied petroleum gas (LPG or
propane), firewood, crop residue, dung, and other renewable sources such as solar energy. The per capita energy use in the residential
sector is as low as 2560 kWh/yr for India.
Traditional fuels are predominantly used for cooking. In the rural areas of the country, the three primary sources of energy for cooking are
firewood and chips, dung cake, and LPG. In urban areas, cooking energy sources are primarily LPG and piped natural gas in select cities.
Figure 10.9 shows seasonal differences in energy demand for Delhi, India (Manisha et al., 2007). In summer months, air-conditioners and
refrigerators each account for about 28% of total monthly electricity consumption, while lighting accounts for about 8–14% of annual
electricity consumption. In winter, major uses of electricity are refrigerators (44%), water heating (“Geyser” 18%), and lighting (14%).
Based on CPWD (2004), in India’s commercial sector 60% of the total electricity is consumed for lighting, 32% for space conditioning,
and 8% for refrigeration. End use consumption varies largely with space conditioning needs. In a fully air conditioned office building,
about 60% of the total electricity consumption is accounted for by air conditioning followed by 20% for lighting.
Summer Winter
1% Cooking 1% Cooking
1% 2%
Lighng 6% Lighng
4% 9%
5% 14%
Ceiling fans 7% Room heater
Coolers
15% 8% Geyser
Air condioner
28% Refrigerator
Refrigerator
9% Television
Television 18%
44%
Pumps
Pumps
28%
Others Others
Figure 10.8 | Share of end-uses (by appliance) in electricity consumption in Delhi, India. Source: Manisha et al., 2007.
A study carried out by Socolow (1978) demonstrated energy use vari- can be as large as a factor of 40 (see Figure 10.10). While the average
ations of more than a factor of two between houses that were identi- is 2.3kWh/m2, the range is from near zero to over 14 kWh/m2. The real
cal but had different occupants. Gram-Hanssen (2004) found a similar income of the high-energy users is lower than those of the low-energy
variation of household electricity use in much larger sample of identi- users.
cal flats in Denmark. This is consistent with the findings of the World
Business Council for Sustainable Development/Energy Efficiency in Social choices about cooling technology will prove increasingly import-
Buildings (WBCSD/EEB) that show that people can improve energy effi- ant. For instance, a very large stock of residential, institutional, and com-
ciency in buildings by around 30% by behavioral changes without any mercial buildings in India is still designed to be non-air-conditioned and
extra costs, or they can compromise a building’s performance by up to to use only ceiling fans to provide thermal comfort during hotter peri-
60% by behavioral effects (WBCSD, 2009). ods, while in other countries electric chilling is the standard in commer-
cial buildings. Occupants of Indian buildings are acclimatized to higher
A similar result is illustrated by a study of energy use for home air con- temperature and humidity conditions without feeling uncomfortable.
ditioning in a residential building in Beijing (Zhang et al., 2010). The This translates to very low energy usage in such buildings, with a very
building consists of 25 home units, all with similar income character- limited scope for enhancing energy efficiency, but with a high potential
istics. Although each flat is fully occupied, the difference in energy use for reducing future air conditioning needs.
662
Chapter 10 Energy End-Use: Buildings
45
GJ per capita (normalised to 2700 HDD)
40
35
30
25
20
15
10
ce
n
building in Beijing. Source: based on Zhang et al., 2010.
an
pa
ad
U
an
m
Ja
an
Fr
er
C
10.1.3.5 The Drivers of Changing Demand for Building location, form, and orientation are integrally related to urban/
Building Energy Services rural design, which, in turn, also influences energy use necessary for
transporting people and products to buildings, as well as the feasibility
The share of energy use in buildings in the total energy use increases of certain sustainable energy supply options such as district heating and
with the level of economic development. In India, with a near-con- cooling, and community-scale renewable energy generation. Therefore,
sistent 8% annual rise in annual energy demand in the residential urban design, building energy use, and urban transport energy use are
and commercial sectors, building energy use has seen an increase integrally related (see Chapter 9 and Chapter 18).
from 14% in the 1970s to nearly 33% of total primary energy use in
2004–2005 (authors’ calculation based on the data from IndiaStat, In India and China, urban households tend to have higher energy
2010). requirements than rural households (Lenzen et al., 2006; Peters et al.,
2007). In China, moving from a rural to an urban life currently increases
In addition to the determinants of building energy services discussed household demand for energy by about a factor of three (Table 10.2),
above, additional factors are major contributors to changing energy ser- while in developed countries, urban households tend to have lower
vice demands: (1) population growth; (2) urbanization; (3) shift from energy requirements. By 2020, both rural and urban demand for energy
biomass to commercially available energy carriers, especially electrifica- will increase due to a combination of urbanization, a shift from biomass
tion (percent of population having access to electricity); and (4) income, to commercial energy carriers, and increased income. Thus, Chinese
which is a strong determinant of the set of services and end-uses for urban energy use per household in 2020 is expected to be five times the
which commercial energy is used and the quantity and size of energy- amount of rural energy per household today.
using equipment; (5) level of development; (6) cultural features; (7) level
of technological development; and (8) individual behavior. Availability Building size and building floor space per person are also important
and financial aspects of technologies and energy carriers are also factors that depend upon income and demographics. Households with
important. more occupants tend to have lower per capita energy use. Older and
wealthier individuals are more likely to occupy larger dwellings with
While energy use in buildings is influenced by income, specific energy fewer occupants. Often, improved energy efficiency is offset over time
use does not necessarily continue growing at an equal rate at higher by bigger floor space per person or per household.
income levels. For instance, Figure 10.11 shows the trend of specific
building energy use in the United States during the second half of the In sum, population growth, urbanization, the shift from biomass to
twentieth century, for Japan since 1970, and the trend for China since commercial fuel carriers including electricity, and income growth are
the mid-1990s. The most significant increase can be observed during contributing to increasing demand for energy services. Technologies,
the first two decades in this period. While gross domestic product (GDP) practices, and policies toward increasing energy efficiency are offsetting
continued to increase in the second part of the period, improvements in growth in some locations and offer large future potential for reducing
technological efficiency have kept energy growth trends at bay. Chinese- the quantity of energy required for energy services. Individual choices
specific building energy demand figures currently are in the same range of lifestyle and specific behavior may greatly increase or decrease the
as the United States in the 1950s. Whether China will follow trends of demand for energy services.
663
Energy End-Use: Buildings Chapter 10
Table 10.2 | Increasing energy intensities when moving from rural to urban life in China.
Rural Urban Rural Urban Urban/Rural 2000 Urban/Rural 2020 2020 Urban/ 2000 Rural
Total building primary energy use intensity in U.S Total building primary energy use intensity in Japan
U.S China urban average JP China urban average
500 500
450 450
400 400
350 350
kWh/(m2.a)
kWh/(m2.a)
300 300
250 250
200 200
150 150
100 100
50 50
0 0
1949
1951
1953
1955
1957
1959
1961
1963
1965
1967
1969
1971
1973
1975
1977
1979
1981
1983
1985
1987
1989
1991
1993
1995
1997
1999
2001
2003
2005
1965
1967
1969
1971
1973
1975
1977
1979
1981
1983
1985
1987
1989
1991
1993
1995
1997
1999
2001
2003
2005
2007
Figure 10.11 | Trend of total building final energy use per m2 in the United States (1949–2006) and in Japan (1965–2007) (kWh/m2/yr) as compared to China. Sources: US
Census Bureau, 2000; US Census Bureau, 2008; Energy Data and Modeling Center, 2008; US DOE, 2008; Building Energy Research Center, 2010.
10.1.3.6 Energy Carriers Used to Satisfy Energy In developed countries, electricity and natural gas are the most fre-
Service Needs in Buildings quently used energy carriers, with electricity taking an increasing share.
For instance, while buildings in the United States use only 39% of the
In developing countries, biomass, coal, oil products, and natural gas country’s primary energy, they use 71% of electricity and 54% of the
are mostly used to satisfy energy service needs in buildings because in natural gas supply.
rural areas people have easier access to biomass compared to people
living in cities, and because even many urban building occupants do Figure 10.12 presents the distribution of fuels in total final energy use in
not have access to electricity, (Shepherd and Zacharakis, 2001; Melichar the residential and commercial sectors worldwide. Note that residential
et al., 2004; see also Chapter 2). The progression from traditional bio- energy use (81.3 EJ) exceeds commercial and public sector energy use
mass fuels to more convenient and cleaner fuels has traditionally been (27.5 EJ) by a factor of three.
explained by the “energy ladder” model, suggesting that increasing
affluence is the key to the transition.
10.1.4 Indirect Energy Use from Activities in Buildings in
More recently, the multiple fuel model was developed to explain house- Detail Using the Life Cycle Assessment Approach
hold decision making in developing countries under conditions of resource
scarcity or uncertainty taking into account the following factors: (1) eco- 10.1.4.1 Key Messages
nomics of fuel and stove type and access to fuels; (2) technical charac-
teristics of cookstoves and cooking practices; (3) cultural preferences; The life cycle approach is necessary to optimize the total energy required
and (4) health impacts (Masera et al., 2000). In addition to urbanization, to provide energy services in buildings because the importance of indir-
Pachauri and Jiang have identified income, energy prices, energy access, ect energy use can increase as more energy efficient technologies are
and local fuel availability as key drivers of the transition from traditional applied. Depending on climate and energy efficiency, the construction of
to modern fuels in China and India (Pachauri and Jiang, 2008). a building contributes as much as 25% to total indirect energy use, with
664
Chapter 10 Energy End-Use: Buildings
Natural
Gas
17.9 Natural
Electricity Gas
13.8 6.9
Renewables
Combustible 0.3
Renewables
Renewables & Waste
Combustible 0.04
31.7
Renewables & Waste
0.6
Figure 10.12 | World total final energy consumption by fuel in the residential (left) and commercial and public (right) sectors in 2007 (EJ). Source: IEA Online Statistics, 2007.
higher values for very high efficiency or energy self-sufficient buildings. (Treloar et al., 2000). This indirect energy use has been variously referred
Even though commonly pursued efficiency strategies increase the energy to as embodied, grey, or upstream energy.
embodied in the building, in cold and temperate climates this invested
energy is typically recovered with an energy payback time below one This section provides an overview of embodied energy, including the
year. Building-integrated PV systems, however, require at least five years trade-offs between embodied and operational energy, and exam-
to recover the energy invested in their construction and may, from a life ines it in detail for important cases: construction, heating, and energy
cycle perspective, not be the cleanest option of supplying electricity. embodied in water consumption in buildings. Indirect energy use is
The environmental impacts of different building materials and designs strongly affected by choices made during building construction, oper-
depend on a number of factors with wood offering an advantage in ation and/or use, as well as dietary choices.6
terms of carbon storage and potential energy recovery after demolition.
A refurbishment of existing buildings to increase efficiency can offer sav-
ings in total life cycle energy use compared to demolition and new con- 10.1.4.3 Embodied Energy
struction. While optimal solutions will be site- and case-dependent, in
general significant reductions in environmental impacts can be obtained This section provides some general insights from life cycle assessment
with energy efficient building designs, a wise choice of building materi- (LCA), and presents results of life cycle studies for building materials and
als, and renewable energy sources integrated in buildings. buildings. Section 10.1.3 presented the direct use of energy for different
energy services in the US residential sector. Figure 10.13 provides an over-
view of the direct and indirect energy use of the average household in the
10.1.4.2 Introduction to the Life Cycle Approach United States in 2002, from the life cycle perspective. Indirect energy use
is split into energy losses and indirect energy connected to the purchase of
A life cycle approach is necessary to optimize the total energy use all other goods and services. The largest category is private transport. The
required to provide energy services in buildings, because, for instance, second largest category is “utilities,” which includes direct energy use and
the importance of indirect energy use can increase as more energy-effi- the provision of water and wastewater treatment. The third largest cat-
cient technologies are applied (see also earlier sections). In addition to egory is the indirect energy embodied in food purchased by households.
direct energy use, a life cycle approach takes into account the energy
used to produce the materials for constructing the buildings, energy 6 Embodied GHG emissions cover a broader set of issues than just embodied energy.
losses associated with the provision of electricity and fuels to the build- They also include process-based CO2 emissions from clinker production, carbon stor-
ings, energy used in the construction and maintenance of a building, age in wood, and the non-CO2 GHGs (mainly fluorinated gases) used in the produc-
tion of certain construction materials and in the operation of some equipment, such
and energy used in manufacturing and supplying building equipment – as chillers. IPCC (2007) discussed non-CO2 emissions related to buildings in detail,
ranging from lighting and TV sets to heating and cooling equipment and thus this section focuses on indirect energy use.
665
Energy End-Use: Buildings Chapter 10
Educaon Direct
900
Health Energy losses Residential
Communicaons Indirect Buildings
800 Commercial
Clothing/Footwear
Buildings
Micellenaous Goods and Services
PrivateTransport
500
Alcohol,Tobacco
Restaurants,Hotels
0 20 40 60 80 100
GJ per capita and year 300
Figure 10.13 | Direct and indirect primary energy use of the average US citizen in
2002 for different consumption purposes. Source: based on Weber, 2009. 200
Refrigeration and cooking requires about 10% of the direct household Ramesh et al. (2010) reviewed life cycle energy studies of 73 buildings,
energy use, which is clearly less than the indirect energy required to including 60 buildings in OECD countries from Sartori and Hestnes (2007).
grow and process the food. The importance of indirect energy used for The operating and embodied energy are presented in Figure 10.14. The
manufactured goods used in buildings increases with increasing wealth, embodied energy dominates only in three cases, two in climates not
and hence overtime (Lenzen et al., 2006). requiring heating or cooling and the other a self-sufficient solar home
in a Nordic country. In most cases, the embodied energy contributes
to 5–25% of the total energy over the lifecycle. The embodied energy,
10.1.4.4 The Life Cycle Impact of Building Materials and however, varies between 9 and 140 kWh/m2y, given building lifetimes
Design of 30–100 years. Similar results have been obtained for the United
Kingdom (Monahan and Powell, 2011).
There is a distinction between the construction, operations and main-
tenance, and demolition of buildings. For most buildings, the bulk of An analysis of different alternatives for the main building material in
energy use is in the operations phase, and energy conservation efforts Sweden demonstrated that wood is preferable over concrete, especially if
have appropriately focused on reducing this energy use through smarter the wood is used as fuel after demolition or reused in buildings (Borjesson
design, better insulation material, and improved building technology. and Gustavsson, 2000; Lenzen and Treloar, 2002; Gustavsson and Sathre,
However, for short-lived or highly efficient buildings, construction is 2006). Using a detailed input-output analysis of the entire Swedish con-
responsible for a substantial share of the total energy use. Demolition struction sector, Nässen et al. (2007) show that building materials account
offers an opportunity to recover some of the energy, either by combust- for a little more than half of the energy use in the production of new
ing elements with high heating value or by reusing building materials detached and multifamily buildings. The energy use for excavation of the
and components, thus avoiding energy-intensive primary production of site and transport is important, as is the sum of construction and ser-
new materials. In construction, and especially demolition, energy for vice inputs. This sector-wide study estimates energy use in the production
transport is an important consideration, constraining remanufacturing phase of buildings for Sweden at about 25% of the total energy used for
and recycling of building components and materials. buildings (Nässen et al., 2007).Studies usually only account for energy, not
666
Chapter 10 Energy End-Use: Buildings
Figure 10.15 | Annualized operational energy use vs. annualized embodied energy use for polystyrene insulation of differing thickness for a case study of low-energy residen-
tial building in a maritime climate. Source: Hernandez and Kenny, 2010.
Note: The Net Energy Ratio (NER; also called the return on energy investment) indicates the benefit of each step of additional insulation.
environmental impacts. Depending on the energy mix chosen by various Reviewed case studies of highly efficient buildings indicate that efficient
actors along the life cycle, a lower life cycle energy use does not necessar- design depends on higher initial investments of embodied energy. The
ily result in lower environmental impacts (Brunklaus et al., 2010). embodied energy cost of efficiency, however, is small and the energy
payback period is on the order of months (Feist, 1996; Winther and
Hestnes, 1999). Similar gains can be made by retrofitting existing build-
10.1.4.5 Highly Efficient Buildings and Active Components ings in a cold climate (Dodoo et al., 2010). An environmental assess-
ment of a passive house in France indicates that the passive design
For highly energy efficient buildings and the use of active7 building tech- leads to a reduction in environmental impacts in 10 out of 12 impact
nology, the trade-offs between embodied energy and environmental categories investigated, by 28% on average over a conventional design
impacts and operational energy and environmental impacts becomes (Thiers and Peuportier, 2008). Blengini and Di Carlo (2010) report simi-
critical and requires a life cycle assessment to ensure that measures are lar results for a passive house in Italy. Environmental gains, however,
not counterproductive. significantly depend on the energy source and conversion technology
for heat and electricity. A study in Sweden indicates that a passive
Figure 10.15 illustrates an investigation of the trade-off between house supplied entirely by electricity can lead to higher environmental
embodied energy and operating energy. Increasing the thickness of a impacts than a standard building supplied by district heat (Brunklaus
fairly energy-intensive insulation material (polystyrene) in a house that et al., 2010). No comparable studies for hot and dry or hot and humid
already has a passive design (15 kWh/m2y) reduces energy use up to a climates were found.
point. The last step, from UP3 to UP4, leads to an increase of life cycle
energy use, because the net energy ratio (energy return on investment) The introduction of active energy-generating components such as solar
is smaller than one (Hernandez and Kenny, 2010). collectors and photovoltaic (PV) modules leads to a substantial increase
in embodied energy and environmental impacts (Winther and Hestnes,
7 By active building technology this section refers to components that generate energy, 1999). Published net energy analyses indicate an energy payback time
mostly power. of solar hot water heaters from half a year to two years (Crawford and
667
Energy End-Use: Buildings Chapter 10
rather than demolishing them and replacing them with state-of-the-art Note: Big appliances comprise cold appliances, wet appliances and big cooking
new construction. There is no single answer. Various aspects of building appliances; small appliances include vacuum cleaners and microwaves; ICT includes
renovation, replacement, and demolition have been investigated. Building computers, phones and peripherals; and audiovisual equipment include TVs, video
equipment and audio equipment.
lifetime and the choice of demolition technique are important for the life
cycle energy use of different building materials. If the building structure electronic equipment, Roux (2010) shows that the greenhouse gas emis-
can be made to fit new purposes, retrofitting is often the more environ- sions caused by the production of information and communication tech-
mentally friendly option, because it preserves material and reduces trans- nology and audiovisual equipment purchased by Norwegian households
port needs. Itard and Klunder (2007) have investigated the case of two is larger than the emissions caused by the electricity this equipment uses,
larger residential projects using life cycle assessment. According to their even assuming a relatively polluting electricity mix (Figure 10.16). Taking
results, maintenance or transformation of the existing stock has lower the manufacturing of the equipment and the use of networks and con-
impacts in both cases than demolition and new construction. These results tent of ICT and audiovisual equipment into account, the GHG emissions
are confirmed by studies of individual building components. Retrofitting caused by this equipment are equal to or larger than those caused by
to high energy efficiency standards is fully possible and often environ- washing machines, driers, refrigerators, and freezers taken together. While
mentally desirable (Dodoo et al., 2010). If a demolition is necessary, the these research results cannot be generalized, they indicate that the grow-
embodied energy in the building material can be preserved through the ing, rapid turnover of household electronics is an emerging problem that
reuse of building components or recycling of the material, or it may be comes on top of the energy use of traditional household appliances. It
recovered through incineration. The environmentally preferable option may also stress the importance of regulating the durability of such equip-
depends on local circumstances, and transportation required for alterna- ment as a key energy- and GHG-saving strategy for residential emissions,
tive solutions is an important factor (Bohne et al., 2008). potentially with comparable reductions as direct energy-saving policies.
The electricity used by electric and electronic products used in buildings Another commodity through which energy is embodied in buildings
is ultimately converted to heat and either contributes to heating the is water. The trade-offs between energy and the environment are dis-
building or needs to be removed through a cooling system, depending cussed in detail in Chapter 20; however, this section narrows its focus
on the climate, building, and heat load. Such energy use in office build- only to the significant interactions of water and energy associated with
ings can be up to several 100kWh/m2/yr, while appliance-related electri- their usage in buildings. These interactions are (1) water use for energy
city consumption in residential buildings in OECD countries is typically supply that is later used in buildings; (2) energy use to produce water
around 50kWh/m2/yr. consumed later in buildings; and (3) water used in energy consuming
equipment and appliances installed in buildings as a special subcat-
Life cycle assessments of large appliances indicate that operations-phase egory of interaction number two.
electricity use is the dominant source of environmental impacts (Cullen
and Allwood, 2009). For personal computers, however, the production First, energy supply requires water. For instance, in the United States
causes significant impacts (Williams, 2004). In what is to our know- around 40% of freshwater withdrawals are used as cooling water for
ledge the first study of life cycle impacts of household appliances and thermal power plants that are generating electricity (Huston et al., 2004).
668
Chapter 10 Energy End-Use: Buildings
Thus, reducing electricity demand in buildings has the potential to reduce 10.1.5 The Impact of a Changing Climate on Building
freshwater withdrawals and associated environmental impacts. Second, Energy Service Demand
water used in buildings8 requires energy to extract, pump, transport,
treat, and dispose the potable water and wastewater and to heat water A warming and changing climate has a strong influence on energy use
for the final domestic and commercial use. For example, in California, in the building sector worldwide. While cooling demand increases as the
these water-related energy uses for all sectors (buildings, industry, and climate warms, passive cooling approaches (e.g., overnight ventilation,
agriculture) account for about 19% of the state’s electricity, 32% of its shadowing) become less effective or do not achieve acceptable indoor
natural gas, and 88 million gallons (3%) of diesel fuel every year (John temperatures. On the other hand, heating demand decreases in cold
et al., 2005). Barry (2007) estimated that 2–3% of the world’s energy zones and allows acceptable winter comfort to be achieved more easily.
use is used only on pumping and treating water for civil and industrial In temperate climate areas such as much of Europe, Japan, South Africa,
supply. Water losses increase the amount of energy required to deliver or the United States, both impacts on winter heating and summer cool-
water to the consumer. Barry (2007) provides case studies from Mexico, ing demand can be observed.
Brazil, and South Africa that exemplify that water loss ranges from one-
third to one-half of the volume of water produced due to leaks and The net impact of warming depends on a complex set of factors. These
system inefficiencies. include the choice of fuel and conversion efficiencies for heating fuels
and power generation, building design, efficiency, and operation.
Energy can be saved through water consumed in buildings by techno- Cooling loads will depend strongly on the market penetration of air con-
logically reducing water demand at the point of its final use – such ditioning, which itself will be dependent on income, building design, cul-
as through efficient washing machines, low flow faucets, toilets, and ture, and increasing internal loads of buildings by office automation, as
shower heads, increasing efficiency of water heating (see Section 10.4 well as external temperature. In addition, the cooling demand is exacer-
for details), and eliminating water losses during the process of water bated by the urban heat island effect (see Section 10.2.6) and the escal-
extraction, treatment, transportation, distribution, and wastewater ation of service demand for cooling. In some moderate climate regions,
cleaning. Another cost-effective opportunity is the promotion of water- by contrast, heating loads may decrease substantially, or may even
saving habits and lifestyles. Use of treated wastewater for other appli- become unnecessary due to the combined effect of advanced know-
cations, such as for landscaping and flushing, is also predominant and how in building construction, building insulation performance, and an
even mandatory in India for several building typologies under environ- increase in internal heat loads. In contrast, the load on refrigeration
mental clearance norms. This, in turn, saves energy for pumping and equipment increases and its efficiency decreases with rising internal
transportation of water. The Alliance to Save Energy (2008) estimated temperatures. The overall global effect is very likely to be an increase in
that municipalities can cost-effectively save at least 25% of energy and electricity use, due to additional cooling demand in warmer continents
money through water systems alone. and regions, despite a reduction in direct heating fuel use, with a net
impact on primary energy that depends on a range of factors (Hunt and
Finally, a special subcategory of energy saving measures is associated Watkiss 2011).
with water use in energy-using appliances, such as water heaters, cook-
ing devices, and dish- and clothes-washing machines and in cooling and Changes in summer temperatures will also tend to increase the max-
chilling applications. Energy savings can occur by means of water sav- imum load on electricity systems that already have summer peak
ing considerations in this equipment. Evaporative cooling is still largely demand, and therefore increase the need for power generation cap-
used in India, for example, and provides a low-energy means of pro- acity. There are also implications for cooling strategies in buildings in
viding cool air in many parts of the world. For air conditioning appli- some regions. In those regions with cold moderate climates where resi-
cations, water-cooled chillers are more energy efficient than air-cooled dential building over-heating is currently not a significant issue, it may
ones. There is a dichotomy of choice between the use of water-efficient become so, and passive cooling techniques currently associated with
vis-à-vis energy-efficient chilling machines. Use of potable fresh water warmer climates will need to be incorporated into building design. On
for space conditioning is prohibited in several states of India, especially the other hand, in some arid climates, as diurnal average temperatures
where fresh water supplies are constrained. Also, existing environmen- rise, existing passive cooling techniques may become inadequate, lead-
tal clearance norms for large-scale building projects in India encourage ing to greater reliance on active cooling. In general, buildings will need
the use of recycled and treated wastewater or harvested rain water for to be designed to allow comfortable conditions to be maintained in the
space conditioning purposes. These measures not only address an envir- range of climates they are expected to face over a building’s lifetime. To
onmental challenge – clean water conservation – but also reduce water- the extent this is not done, there are increased mortality and morbidity
related energy use in connection with cooling. risks from heat stress, although health impacts of cold will fall.
669
Energy End-Use: Buildings Chapter 10
and no thermally advanced buildings are considered. The individual purchase of inefficient types of room air conditioning during hot sum-
changes may be quite large: for example, 10% per degree change in mers. This may lock in the existing set of inefficient technologies (Unruh,
winter temperature for residential space heating in the United Kingdom 2000) in situations where innovative solutions would be more desirable
(Summerfield, 2010). The aggregate impact of the different effects is (e.g., passive ventilation, passive buildings, cooling by absorption tech-
smaller. The net result in a 4°C scenario9, for instance, is a reduction nology, shadowing by building elements and trees, white roofs and sur-
in final energy demand by 2050 of 3.3% (Jochem et al., 2009) for the faces, vegetation in urban areas). Given the long life of building stock, it
European Union-27 plus Norway and Switzerland. However, electricity is clearly a priority that policies consider climate mitigation and adapta-
used in space cooling is presently more carbon intensive in many coun- tion of the building stock together.
tries than energy used for heating (e.g., gas, heating oil, wood fuels) in
Europe and other countries in moderate climates. Depending on the final
energy mix for heating and cooling, and the mix of primary energy for 10.2 Specific Sustainability Challenges
electricity supply, net CO2 emissions in quite a few countries could still Related to Energy Services in Buildings
slightly increase even though overall energy demand decreases (Cartalsi
et al., 2001; Frank, 2005; Aebischer et al., 2007; Rivière et al.; 2008). 10.2.1 Key Messages
The total electricity demand in the buildings sector is projected to slightly This section focuses on major cross-cutting, building-specific issues that
decrease in Nordic and Baltic countries (0.5%) by 2050. However, a often present challenges and require trade-offs when pursuing sustain-
7% increase in the electricity demand by 2050 is expected in southern able energy goals; additional to those covered by other chapters in GEA.
Greece, Malta, Cyprus, Southern Italy, Spain, Bulgaria, and Romania in a The key message that is valid across various subsections is that most of
4°C Scenario (Mirasgedis et al., 2007; Jochem et al, 2009). This points to such challenges can be overcome by a high-efficiency, state-of-the-art
distributional issues regarding adaptation or mitigation policies between building (from new and retrofits) and energy using equipment stock.
northern and southern European countries. It may also lead to a greater The section on fuel poverty shows that high-efficiency buildings may
need to balance summer electricity flows via the trans-European elec- eradicate fuel poverty and through this can also improve general social
tricity grid, particularly during extreme heat waves. Similar effects can welfare.
also be assumed for northern and southern states in the United States,
Russia, or provinces in China.
10.2.2 Indoor Air Quality and Health Impacts of Air
According to Mansur et al. (2005), the combination of climate warming Tightness
and fuel switching – from fuels to electricity – in buildings in the United
States results in increases in the overall primary energy demand. There Improving air tightness is an important method to reduce heating
is likely to be a significant growth in the installation of air conditioning, and cooling energy demand. However, it is also important to secure
but, with low utilization, additional energy demand may remain modest adequate ventilation, so as to maintain a healthy indoor environment
(Henderson, 2005), as confirmed by Jochem et al. (2009) for European due to the variety of chemicals used in interior materials, furniture, and
countries north of the Alps. daily goods. While this is not an issue with advanced buildings described
in this chapter, since by design they operate with ventilation rates that
There will be smaller impacts on other uses of energy in buildings. While result in very high indoor air quality, this is still an issue with existing or
the energy required to supply the same amount of hot water slightly sub-optimally designed, inefficient future buildings.
decreases in a warmer climate, any increased demand for showers and
bathing in warmer weather and additional heat waves will offset this One way to improve indoor air quality in increasingly airtight build-
reduction. ings is to reduce the use of materials emitting high levels of volatile
organic compounds and ensure adequate ventilation. Health problems
Climate change will increase electricity and primary energy demand in caused by airtight buildings without adequate ventilation, the so-called
most emerging and developing countries, in contrast to a small or even sick building syndrome,10 were first identified as a result of reducing
beneficial effect in more temperate industrialized countries of the devel- air change rate as an energy conservation measure. In order to ensure
oped world such as Scandinavian countries, Russia, or Canada. proper air quality, the American Society of Heating, Refrigerating and
Air-Conditioning Engineers (ASHRAE) proposed a range of allowable
If left to the market alone, i.e., in the absence of specific government CO2 concentrations from 1000 ppm to 2500 ppm, as well as ventilation
interventions, the responses to these climate changes are likely to be requirements of 10 liters/sec per person for office spaces. In addition,
based on incremental short-term considerations – for example, the
10 Sick building syndrome describes the situations in which building occupants experi-
9 The 4°C scenario assumes that global average temperature will rise by 4°C com- ence health and comfort effects that appear to be linked to time spent in a building,
pared to pre-industrial levels (van Vuuren et al., 2008). but no specific illness or cause can be identified (US EPA, 1991).
670
Chapter 10 Energy End-Use: Buildings
case control studies of allergy symptoms in 390 Swedish households 10.2.4 Fuel and Energy Poverty
(Bornehag et al., 2004) showed that the air change rate of the case
group that had allergy symptoms was lower than 0.5/h11, the same Even if access to modern energy carriers has been enabled, many popu-
value under which the sick building syndrome and other air infectious lation segments still may not be able to afford sufficient amounts of
diseases have also been shown to increase (Seppanen et al., 1999). In energy to meet their basic needs. The problem exists even in the most
Japan, measurement of the concentration of chemicals in 2800 house- affluent countries, in many of which significant shares of the population
holds (Osawa and Hayashi, 2009) showed that concentrations of for- cannot afford adequate heating, or are forced to spend disproportionate
maldehyde in 27.3% of the households were higher than the guideline shares of their income on meeting basic thermal comfort needs. Since,
value. As a result, the revised Building Standard Law stipulates that air as the section below argues in detail, this is often not due to generic
change rate in the living rooms of new constructed buildings must be poverty; or is in cases cause of other poverty, this problem is intimately
secured at at least 0.5/h. related to the sustainable development goals of GEA.
While there are several definitions of fuel poverty, this document’s use
10.2.3 Household Fuels vs. Environmental Health
of the term is broader than that in many other sources. According to
Tirado Herrero (in preparation), “A household is in fuel/energy poverty
As discussed in Chapter 4 and other Chapters of the GEA, indoor air pol-
when it is unable to afford an adequate amount of energy services to
lution arising from poor quality fuels burnt in inefficient devices has a
satisfy its basic domestic needs – particularly sufficient thermal com-
health toll of mortality and morbidity measured by hundreds of millions
fort – or is forced to spend a disproportionate share of its income on
each year. Since the issue is treated in detail throughout this document
them”. This phenomenon, called “energy poverty” and “fuel poverty,”
(including, but not limited to, Chapters 2, 3, 4, 11, and 19), this section
was introduced in Chapter 2, and its health impacts were discussed in
only brings the importance of the issue to the fore and highlights some
Chapter 4. This chapter elaborates further on these health and social
key relevant aspects.
consequences, and discusses how the solution to the problem goes
hand in hand with sustainable energy goals in buildings.
Traditional biomass fuels have been the single most important energy
source in buildings for centuries. They still account for approximately
Fuel poverty originates from a combination of three main causes: house-
10% of global total primary energy use concentrated primarily in devel-
hold income, energy prices, and domestic energy efficiency. In many
oping countries. Approximately 60% of all biomass is used in solid
cases the problem can be substantially alleviated, sometimes even elim-
unprocessed forms such as firewood, agricultural waste, and dried ani-
inated, by significantly improved efficiency – thus providing a strong
mal dung burnt in crude and inefficient stoves and open fires for cook-
synergy with sustainable energy goals. Box 10.A.1(see the GEA Chapter
ing and heating (IEA, 2008b). Chronic Obstructive Pulmonary Diseases,
10 online appendix) provides a case study in India of a project to pro-
to which pollution from poor combustion of biofuels indoors contribute,
vide solar lighting for approximately 886 million rural residents.
are predicted to become the world’s third largest cause of death by
2030 (WHO Statistics, 2008).
Fuel poverty is often the long-term consequence of measures that were
introduced to provide sufficient access: i.e., subsidized energy prices for
Women and children in rural and urban areas of developing coun-
the poor. Artificially low energy tariffs provide the wrong economic sig-
tries are most at risk due to their daily, close proximity exposure.
nals and thus result in the acquisition of inefficient equipment and occu-
Providing chimneys and efficient wood-burning stoves have been
pation of energetically poor buildings. When consumers are weaned from
shown to reduce health risks by up to 50% in some areas (Romieu
the subsidized prices, they find themselves locked into disproportionally
et al., 2009). Facilitating access to clean fuels such as biogas, solar
high energy expenditures. An example of this is the formerly communist
thermal energy, liquefied petroleum gas, or electricity could reduce
countries of Central and Eastern Europe and the former Soviet Union,
health risks, particularly in urban areas where commercial energy is
where highly subsidized energy pricing policies have resulted in a very
more widely available. Facilitating a “multiple fuel and clean tech-
poor efficiency building stock and highly inefficient infrastructure. After
nology” by simultaneously making a more efficient and cleaner use
the fall of communism, the introduction of market-based energy pricing
of biomass for cooking and increasing access to other modern fuels
resulted in significant shares of the population now living in fuel poverty
has wider potential ecological and economic benefits due to reduced
and not being able to afford adequate heating. Since they can especially
forest degradation and the time spent, mostly by women, in collecting
not afford investments in improving the efficiency of their energy using
fuel (García-Frapolli et al., 2010). This challenge is explored in more
stock or buildings, poor population segments may turn out to pay sig-
detail in Section 10.7.3 and new developments on advanced stoves
nificantly more for lower levels of energy services than the more affluent
are reported in Section 10.4.3.
who can afford higher levels of efficiency.
671
Energy End-Use: Buildings Chapter 10
UK - Number of fuel poverty households in the UK ranging between 2 and 6.5 million (1996/2007) DECC (2009a)
Ireland - 17.4% of households unable to adequately heat the home (2001) Healy and Clinch (2002)
EU - Average percentage of households unable to heat home adequately (1994/97) in EU14: 16.9% Healy (2004)
[max: 74.4% in Portugal; min. 1.6% in Germany]
CzechRepublic - Less than 10% of households suffering from domestic energy deprivation Buzar (2007)
Macedonia - More than 50% of households suffering from domestic energy deprivation Buzar (2007)
New Zealand - Between 10% and 14% of households in fuel poverty using the UK definition of adequate Lloyd (2006)
indoor temperatures (2001).
Hungary - The average Hungarian household allocated 9.7% of its net income to energy expenses Tirado Herrero and Ürge-Vorsatz (2010)
(2000/07)
- 15% of the population (1.5 million) declared to be unable to afford to keep their homes
adequately warm (2005/07)
Eastern Europe, where it is suspected to be widespread (Buzar, 2007; A common policy tool for alleviating fuel poverty has been subsid-
Boardman, 2010). Though slowly gaining priority in some policy and ies aimed at reducing the energy bills or increasing the disposable
research agendas (Friel, 2007), it is still far from being a common issue income of low income households (DEFRA/BERR, 2008; Scott et al.,
of concern (see Table 10.3). Even in economically and socially advanced 2008; Tirado Herrero and Ürge-Vorsatz, 2010). Such support schemes
regions like the European Union, few Member States have come up with have, however, been criticized because, even though they succeed
specific strategies or policy frameworks to address the issue. In fact, few in reducing fuel poverty temporarily, in the long run they lock these
countries – only the United Kingdom (BERR, 2001; DEFRA/BERR, 2008), households into fuel poverty by creating disincentives to improving
Ireland (MacAvoy, 1997), the United States (Power, 2006) and New the efficiency of energy using equipment and buildings. Healy (2004)
Zealand (Chapman et al., 2009) – have started any significant action to has argued that the saved income most likely will be spent on more
tackle fuel poverty. In the United Kingdom, the government has set as a energy rather than invested in improving the quality of the dwellings.
goal that by 2018 no British household should be spending more than In addition, direct support schemes are often poorly targeted, dis-
10% of its income on energy (DEFRA/BERR, 2008). The likely failure in tort the market, and constrain government budgets (Scott, 1996; IEA,
meeting this target in the United Kingdom, as foreseen by Boardman 2007b; Fülöp, 2009).
(2010), evidences the scale of the challenge and provides arguments
for jointly tackling fuel poverty, climate change mitigation, and energy A more sustainable and long-term solution is the retrofitting or replace-
security challenges. In fact, since domestic energy efficiency solutions ment of inefficient equipment and building stock of these populations
allow bringing households out of fuel poverty while capping or reducing by high-efficiency ones. As this requires substantial investments that
their energy use levels (Milne and Boardman, 2000), eradicating fuel those experiencing fuel poverty themselves will not be able to afford,
poverty will certainly have positive effects on those related challenges. it may be necessary to (re)allocate public funds and financing to such
purposes. For instance, since large sums of public funds, comparable to
There is evidence that inadequate indoor temperatures cause excess the investment costs of high energy efficiency retrofit programs that
winter mortality (EWM) (Eurowinter Group, 1997), with most western may fully eliminate the fuel poverty problem are devoted yearly to social
countries reporting relative EWM rates ranging from 5% to 30% (Healy, energy price subsidies and temporary fuel poverty alleviation measures,
2004) (see Table 10.4). Based on a cross-country comparison, taking a progressive substitution of the latter by the former can substantially
Norway as a control case, it is estimated that 44% of the cardiovascu- contribute to the solution of the problem.
lar- and respiratory-disease excess winter deaths registered in Ireland in
1986–1995 can be associated with poor housing standards (Clinch and In addition, since a high-efficiency building and appliance stock contrib-
Healy, 1999). Fuel poverty is also linked to certain illnesses (Morrison utes to the solution of many other problems – such as GHG and other
and Shortt, 2008; Roberts, 2008), with particularly negative physical and environmental emissions, energy security, and employment – policy
mental health effects being recorded for vulnerable populations, such integration can result in the availability of funds that can more effect-
as the elderly and children (de Garbino, 2004; Howieson, 2005; Liddell ively reach those goals through improved efficiency, especially if sources
and Morris, 2010). from these several fields are combined. For instance, Ürge-Vorsatz et al.
672
Chapter 10 Energy End-Use: Buildings
EWM
Country Period Reference
Relative1 Absolute
Notes: 1) Percentage of additional deaths in the cold season in comparison with the warm season
(2010) have suggested that Hungary could cover the bill of deep renova- in unheated bathrooms (Tochihara, 1999): the sudden change in blood
tion of its entire inefficient building stock, and thus the complete elimin- pressure before and after bath might also be the cause of death from
ation of its fuel poverty, from the redirection of existing budgets, while apoplexy or anemia. High-efficiency, state-of-the-art buildings advo-
still reaching the objectives of those budget items. cated in this chapter could help overcome this problem. With minimal or
no energy investments, they can provide full thermal comfort and thus
reduce such mortality and morbidity.
10.2.5 Health Problems Caused by Intermittent
Local Heating
10.2.6 Urban Heat Islands vs. Resilient Buildings
Household heating in some cold regions, including Japan and parts of
Europe, is often limited to the occupied space, causing large tempera- The outdoor air temperature in hot weather in thermally massive built
ture differences between heated and unheated spaces. environments with surfaces of low albedo is increasing due to the urban
heat island phenomenon (Oke, 1982; Akbari et al., 1990; inter alia). It
In Japan, measurements of indoor air temperatures in residential build- is becoming a major reason for the increase in energy use, and is exac-
ings located in cold regions indicate that indoor air temperatures are erbated by the measure that is supposed to reduce the impact: the air
maintained around 20ºC in the heated rooms, while the temperatures of conditioning of buildings. Air conditioners transport indoor heat to the
bedrooms, bathrooms, and toilets without heating can be as low as out- outdoors, adding to the heat generated by air conditioners themselves,
door air temperatures (Yoshino et al., 1985). The average temperature thereby contributing to the urban heat island effect in areas with mech-
difference between heated rooms and not heated rooms is often about anical cooling. The heat island effect occurs when surfaces of the built
20ºC. It is thought that blood pressure overshoots caused by such large environment absorb sunlight, which is released as heat during cooler
temperature differences are one of the causes of high death rates from periods, such as nighttime, and keeps the air temperature warm. It can
apoplexy in these districts. Moreover, a large percentage of deaths from raise a city’s temperature by up to 3–4°C and catalyzes smog formation
accidental drowning in bathtubs in Japan is due to the low temperatures and other health hazards (US EPA, 2007).
673
Energy End-Use: Buildings Chapter 10
Table 10.5 | Energy saving for HVAC loads due to green roofs in different regions12.
Source: adapted from Ahrestani, 2010; based on Martens et al., 2008; Wong et al., 2003; Spala et al., 2008; Saiz et al., 2006; Santamouris et al., 2007.
Chapter 4 reviews some health impacts of heat stress. This section roofs can be 31–47°C hotter than the air on any given day, while cool
presents a few further examples. Narumi et al. (2007) carried out inves- roofs tend to stay within 6–11°C of the background temperature.
tigations on the relationship between infection and air temperature in
Osaka, Japan. The number of daily reports of disease increased when the Cool roofing materials cost 5–20% more than conventional ones, but
average outdoor temperature was higher than 22°C. Six out of fifteen in the long run they can provide considerable cost and energy sav-
types of infections: (1) hand-foot-and-mouth disease; (2) herpangina; ings, reduce GHG emissions, and improve human health. Human health
(3) pharyngoconjunctival fever; (4) enterohemorrhagic escherichia coli; improvements include reducing heat-related illnesses and reducing
(5) infectious gastroenteritis; and (6) epidemic keratoconjunctivitis – deaths in buildings without air conditioning (US EPA, 2007). Energy sav-
showed a positive correlation with temperature. ings vary greatly from one building to another between 10 and 70%
of total cooling energy use (Wang, 2008). Preliminary estimates of the
Genchi et al. (2007) studied the increase of tropical nighttime temperatures global emitted CO2 offset potentials for cool roofs and cool pavements
caused by the urban heat island phenomenon, and quantified the impact by Akbari et al. (2008) are in the range of 24 Gt of CO2 and 20 Gt of CO2,
on sleep disorders. The results show that when the temperature is higher respectively, giving a total global emitted CO2 offset potential range of
than 26.7°C, about 10% of residents suffer from sleep disorders, with 1°C 44 Gt of CO2.
increase of air temperature at midnight. It was estimated that the economic
losses due to insomnia was about 305 billion yen (US$ 3.53 billion). Green roofs and walls also mitigate the heat island effect, improve
urban air quality (Yang et al., 2008), reduce CO2 concentrations, and
Among the strategies to address the urban heat island effect are “cool reduce the need for winter heating (Takebayashi and Moriyama, 2007;
roofs” and roof and vertical “greening.” Cool roofs are solar reflect- Li et al., 2010). Green roofs have also been shown to provide thermal
ive roofs that absorb less sunlight than conventional roofs. The greater insulation to buildings through a combination of the reduced thermal
reflectivity is achieved by utilizing a light color of roof surface and spe- conductivity of the roof structure, and the evapotranspiration of the
cial highly reflective13 and emissive14 materials, which can reflect at plants (Martens et al., 2008). A number of studies have shown that insu-
least 60% of sunlight instead of 10–20%, reflected by traditional dark- lation provided by green roofs can reduce energy use of heating, ventila-
colored roofs (US EPA, 2007). Standard black asphalt roofs can reach tion, and air conditioning (HVAC) systems. However, the energy savings
74–85°C at midday during the summer. The surface temperature of bare reported in the literature are usually the results of simulations rather
metal or metallic roofs can increase up to 66–77°C. Cool roofs reach than real measured data, therefore, the range of presented values is very
peak temperatures of only 43–46°C, even in full summer. Conventional wide. For example Sailor (2008) finds that for a 2-story office building
in Chicago and Houston a green roof with 0.2m thick soil reduces total
electricity use by 2% in both cities and reduces natural gas use by about
12 All energy savings presented in the Table are the results of simulations and not
measured data 9% in Chicago and by about 11% in Houston compared to a conven-
tional membrane roof. Table 10.5 demonstrates the results from several
13 Solar reflectance, or albedo, is the percentage of solar energy reflected by a surface. studies and shows that modeling results of HVAC energy saving from
14 Thermal emittance is the amount of heat a surface material radiates per unit area at green roofs vary between 6–72% depending on the climate zone and
given temperature, i.e., how readily a surface gives up heat. number of floors affected.
674
Chapter 10 Energy End-Use: Buildings
As the urban and global climate changes – and warms – the ability availability of land for bio-energy crops (see Chapter 20). The building
of buildings to continue to provide healthy and thermally-comfortable energy intensity (annual energy use per unit of floor area) that can be
environments for inhabitants will be further challenged. A combination regarded as sustainable depends on the human population and the floor
of efficiency (via passive solar design), bio-climatic design (where build- area per person, which together determine the total building floor area.
ings are greened and integrated into their natural settings rather than Given limits – either physical, economic, or practical – to the renew-
set apart from them) (Yeang, 1994), and design for adaptability (when able energy supply, a larger global building floor area will require lower
buildings are designed for simple retrofitting to enhance resilience to energy use per unit of floor area. In the GEA pathways (Chapter 17)
environmental climatic extremes) (Graham, 2005) is necessary to cope where future energy systems meet the key environmental, social, and
with climatic challenges (Bornstein and Lin, 1999). Designers, develop- economic objectives, energy intensity is reduced by the factor of three
ers, regulators, and financiers – both government and private – urgently to four (and even larger in some regions).
need to be made aware of this deteriorating situation. Occupants also
need to be provided with a greater choice of strategies, including energy A hierarchy of options for achieving reductions in the energy intensity
feedback and occupancy monitoring systems, in order to tune buildings of buildings of this magnitude is presented in Section 10.4, beginning
to changing climatic conditions. with urban-scale energy systems, building-scale energy systems, and
finally, individual energy using devices in buildings. A least-cost approach
Among the primary purposes of buildings is the provision of thermal to achieving sustainable energy use in buildings will be to implement
comfort. Thermal comfort is a dynamic quality based on the interaction energy saving measures – either in the construction of new buildings
of people’s metabolism, sensory perceptions, expectations, and accli- or the retrofitting of existing buildings – up to the point where the cost
matization experiences, as well as the human body’s interaction with of the next measure exceeds the cost of the least expensive renewable
the surrounding interior building materials. The material nature of the energy supply option. The least expensive renewable energy supply
urban environment is in a constant dynamic relationship with the urban option might involve the on-site generation of electricity and thermal
climate (Santamouris, 2001), which is in turn embedded in the regional energy, or it might entail the provision of locally produced biomass or the
and ultimately the global climate – a relationship still little understood provision of C-free electricity from distant but high quality wind, solar, or
and appreciated. A change in any of these parameters can change per- other renewable electricity sites. The relative costs of achieving a given
ceptions and experiences of comfort, which exacerbates the demand for low building energy intensity, of on-site generation of renewable energy,
energy for heating or cooling. Integrating into a building the potential to and of off-site supply of renewable energy will vary regionally, over time,
naturally resist climatic extremes and especially temperature excesses and with the type of building under consideration. Some forms of renew-
in urban settings is a fundamental advantage of bio-climatically appro- able energy supply, such as passive heating, ventilation and daylight-
priate design. Both sustainability and livability are enhanced as a ing, can be regarded as energy demand reduction measures rather than
consequence. energy supply measures, but in any case, they tend to be low cost and so
will be early choices in a hierarchy of increasingly stringent demand or
supply measures.
10.3 Strategies Toward Energy-sustainable
Buildings
This section briefly reviews the key strategies that can be applied to 10.4 Options to Reduce Energy Use in
move towards buildings that use energy in more sustainable way. The Buildings
sections to follow “unpack” these strategies, and translate them into
concrete technological and non-technological options. 10.4.1 Key Messages
The key to achieving sustainability in the building stock is to reduce Deep – 75% or more – reductions in the gross energy requirements of
the energy requirements in operating buildings to the point where new buildings compared to the performance of most types of recent
building energy needs can be met entirely through renewable and non- new buildings can be achieved in most or all jurisdictions in the world
greenhouse gas emitting energy sources, while maintaining indoor air through application of the Integrated Design Process and of the prin-
quality and avoiding hazardous chemicals. The extent to which present ciples discussed here. It is also possible to achieve significant – 50%
building energy requirements need to be lowered in order to be satiable or more – reductions in the energy use of existing buildings. Once
by renewable energy depends on the overall energy demand in society gross energy requirements have been reduced by a factor of two to
and hence on the success of measures to reduce energy demands in four, it is sometimes possible to supply most or all of the remaining
other sectors of the economy. It also depends on the achievable and energy requirements with on-site renewable energy generation such
sustainable energy supply from renewable energy sources which, in the as active solar technologies (photovoltaic, solar thermal) mounted
case of biomass energy, depends on a number of still uncertain biophys- on or integrated into the building envelope, thereby reducing the
ical and climatic factors, as well as on diet through its impact on the net energy requirements to zero or achieving net energy generation.
675
Energy End-Use: Buildings Chapter 10
Through drastic reductions in the net energy requirements of build- around courtyards and front courts (Aangan) that served as congregation
ings, it will be significantly easier than otherwise to eventually sup- spaces for families and for sleeping during nighttime, as these are natur-
ply all of the remaining energy requirements from off-site renewable ally cool outdoor spaces. Developing countries, such as India, have a rich
energy sources (such as wind, solar and biomass), whether local or legacy of architecture that uses traditional low- or no-energy techniques
distant but of high quality. to ensure thermal and visual comfort. Old forts and havelis (mansions)
had deployed several innovative techniques of natural lighting, ventila-
tion, and natural cooling to achieve desired comfort levels.
10.4.2 Urban-Scale Energy Systems, Urban Design, and
Building Form, Orientation, and Size15 Roof design is another feature that can influence energy use. An uncon-
ditioned space between inhabited rooms and the roof is a traditional
10.4.2.1 Key Messages insulating technique, and one that allows significant improvements in
thermal performance without loss of useful space, by installing add-
Urban design influences energy use by buildings in several ways. Shape, itional insulation. An overhanging roof also provides passive cooling via
height and orientation significantly affect heating and cooling loads and shading, as well as protecting walls from rain and snow. A reflective
opportunities for passive ventilation. The density of urban developments (white or cool) roof reduces heat gains, as discussed earlier.
influences the economic viability of district heating and cooling systems.
The options discussed in this section, as well as many other sections, may
influence the aesthetics of the building and neighborhood. Nevertheless,
10.4.2.2 Role of Street Orientation and Width by today most, if not all, sustainable energy solutions can be imple-
mented in buildings that do not need to compromise on aesthetics.
Traditional houses and streets in many parts of the world used to be laid
out so as to provide a significant amount of self-shading. The spacing of
buildings close enough to provide significant self-shading will diminish 10.4.2.4 Role of Building Size
wind strength near the ground, reducing the potential for ventilation,
although daytime ventilation is not always useful. Close spacing also Building size is an important factor in energy use. Increased size tends
reduces solar access in winter, but such access will not be needed in to reduce surface to volume ratio, thereby reducing thermal losses and
those hot-summer regions with mild winters. Bourbia and Awbi (2004) gains relative to floor area. However, total surface area and hence total
measured temperatures at the 1.5 m height in traditional (narrow) and energy use will increase unless the envelope is sufficiently improved.
contemporary (wide) streets in a city in Algeria. Traditional streets are In the United States, the living area in dwellings per family member
about five degrees cooler than contemporary streets, whether oriented increased by a factor of three between 1950 and 2000 (Wilson and
north-south or east-west. This is due both to greater shading of trad- Boehland, 2005). This is due in part to declining average family size
itional streets, which reduces direct solar irradiance, and the smaller sky (from an average of 3.67 to 2.62 members) and in part due to larger
viewing angles, which reduces diffuse solar irradiance. In hot-dry desert houses (from an average of 100 m2 to 217 m2). A moderately insulated
climates of India, the urban scape is defined by narrow roads banked 3000ft2 (~300 m2) house in Boston requires more heating and cooling
by tall and compact houses with thick walls and small openings – all of energy than a poorly insulated 1500 ft2 house in the same location. The
these strategies help keep heat out of buildings. larger house also requires substantially more materials. According to a
designer-builder quoted by Wilson and Boehland (2005), the growth in
house size is due to: (1) the loss of a sense of community and public
10.4.2.3 Role of Building Shape, Form, and Orientation life, so that the house becomes more of a fortress that needs to pro-
vide multiple forms of entertainment instead of basic shelter; (2) the
Building shape (the relative length, width, and depth), form (small-scale promotion of the idea that “bigger is better” by the building industry;
variations in the shape of a building), and orientation are architectural and (3) the diminishing craftsmanship in house construction and design,
decisions that have significant impacts on heating and cooling loads, as leading to a substitution of greater size to counteract the sterility of
well as on daylighting and opportunities for passive ventilation, passive modern homes. Wilson and Boehland (2005) list various strategies to
solar heating and cooling, and for active solar energy systems. For instance, make more efficient use of space, so that smaller houses provide the
in temperate climates, the optimal orientation for rectangular buildings is same services.
the long axis running east-west, as this simultaneously maximizes passive
solar heating in the cold season and minimizes solar heating in the warm
season. Traditional houses in warm climates in India were mostly designed 10.4.2.5 Multi-unit Housing, Office and Retail Space
15 This section is a highly condensed discussion drawn from Harvey (2006, 2009, Multi-floor, multifamily housing is significantly more energy efficient
2010). than single-family housing, especially one-floor, single-family housing.
676
Chapter 10 Energy End-Use: Buildings
This is due to the sharing of walls and reduction in roof area, with on-site condensing boilers. System efficiency is maximized if heat from
concomitant reduction in heat loss. Stacking housing units vertically, the cogeneration of electricity is supplied at the lowest possible tem-
or designing single-family houses as two- or three-story houses rather perature, as this minimizes the reduction in electricity generation caused
than as one-story houses will increase the opportunities for passive ven- by withdrawing useful heat from a steam turbine, maximizes the fraction
tilation in the summer by exploiting the buoyancy of warm internal air, of waste heat used, and minimizes heat losses during distribution. This,
and protects the lower floors from solar heat gain. in turn, requires buildings with a high performance thermal envelope
and ideally with radiant floor or ceiling heating systems, which permit
Analyses carried out by Smeds and Wall (2007) indicate that over twice low heat delivery temperatures, as discussed later. However, the heat
the thickness of insulation is needed in a single-family house as in a load in this case might be so low that a district heating network cannot
multi-unit apartment, along with substantially better windows, in order be economically justified unless the building density is very high.
to achieve the same reduction in heat loss. Conversely, adoption of
about the same insulation levels and window performance in an apart- District cooling can be supplied from large, dedicated centralized elec-
ment building as in high performance houses in Sweden reduces the tric chillers or from absorption chillers that are driven with steam from
annual energy use to one-third of that of the high performance house steam turbines for electricity generation. The latter is referred to as “tri-
and to about one-tenth of that of conventional single-family Swedish generation,” as it involves the concurrent production of electricity, hot
houses. water, and chilled water. In principle, district cooling from large, central-
ized chillers can provide significant (up to 45%) savings compared to
Multifamily housing has a smaller surface to volume ratio than single- the use of separate chillers in individual buildings (Dharmadhikari et al.,
family housing, which reduces the building cost per unit of floor area by 2000). This rate of savings is due to the larger full-load efficiency of
reducing the relative importance of the external envelope to the total large chillers compared to small chillers, and the ability to operate each
cost. Construction material requirements are also reduced, while public chiller in a centralized system at, or close to, its maximum efficiency.
transit, walking, and cycling are enhanced and land is spared because a Further savings are possible if the centralized system can make use of
more compact urban form can be created. Thus, multifamily and multi- heat sinks, such as sewage or lake, river, or sea water that would not be
unit office and retail buildings simultaneously reduce energy use and available to chillers in individual buildings. However, in practice there
investment costs and enhance possibilities for alternatives to automo- may be no savings or even an increase in energy use if unfavorable
bile use. behavioral changes – such as switching from cooling only individual
rooms as needed, to cooling the entire building all of the time – accom-
Another benefit of multi-unit housing and mixed (housing and commer- pany the switch to district cooling, as already highlighted in earlier sec-
cial) development is that the connection to district heating and cooling tions of the chapter.
grids is more likely to be economically justifiable, as explained later.
However, large-scale office and retail buildings exceeding 30 meters in The total cost of district cooling systems can be less than the total cost
depth need more energy for lighting, ventilation, and cooling than small- of equipping individual buildings with their own chillers. This is due to
scale office buildings. This is because natural lighting cannot reach the low unit costs for large chillers, the need for less total capacity in cen-
center of the building, so artificial lighting has to be relied upon; natural tralized systems – because the peak cooling loads in individual build-
ventilation cannot provide enough outdoor air, causing a reliance on ings do not all occur at the same time – and the need for less backup
mechanical ventilation; and heat generated inside cannot be released capacity (IEA, 1999; Harvey, 2006). District cooling systems also elimin-
through the envelope, so more cooling is needed. Different shapes – ate the need for rooftop cooling towers, thereby freeing up roof space
e.g., U-shaped or E-shaped rather than rectangular – provide better nat- for other purposes, such as rooftop gardens or solar panels.
ural lighting and ventilation, but with an increase in exterior walls.
District heating networks can be coupled with the large-scale under-
ground storage of heat that is collected from solar thermal collectors
10.4.2.6 District Heating and Cooling during the summer and used for space heating and hot water require-
ments during the winter (Schmidt et al., 2004; Harvey, 2006). Heat can
A district heating system consists of a network of underground pipes also be supplied with biomass, as part of a biomass cogeneration sys-
carrying steam or hot water from a centralized heating facility or heat tem or from geothermal heat sources. If both heat and coldness are
source to individual buildings, while a district cooling system is a net- stored, then heat pumps can be used to recharge the thermal storage
work of pipes to carry chilled water. District heating systems provide an reservoirs or to directly supply heat or coldness to the district heat-
energy savings if they make use of heat that would otherwise be wasted. ing and cooling networks during times of excess wind energy. This, in
The most common source of waste heat is heat produced from the gen- turn, permits the sizing of wind systems to meet a larger fraction of
eration of electricity in fossil fuel or biomass power plants. Conversely, total electricity demand without having to discard as much, or any,
district heating supplied entirely from centralized boilers does not save electricity generation potential during times of high wind and/or low
any energy, and may in fact increase energy use, compared to the use of demand.
677
Energy End-Use: Buildings Chapter 10
10.4.3 Options Related to Building-Scale Energy By focusing on building form and a high performance envelope, heat-
Systems and to Energy Using Devices16 ing and cooling loads are minimized, daylighting opportunities are
maximized, and mechanical systems can be greatly downsized. This
10.4.3.1 Key Messages generates cost savings that can offset the additional cost of a high per-
formance envelope and the additional cost of installing premium (high
The energy use of buildings depends to a significant extent on how efficiency) equipment throughout the building. These steps alone can
the various energy using devices (pumps, motors, fans, heaters, chillers, usually achieve energy savings on the order of 35–50% in new commer-
and so on) are put together as systems, as well as the efficiencies of cial buildings, while utilization of more advanced or less conventional
individual devices. Savings opportunities at the system level are gen- approaches has often achieved savings on the order of 50–80%.
erally many times what can be achieved at the device level, and these
system-level savings can often be achieved at net investment-cost sav-
ings. Significant savings are also possible for business and household 10.4.3.3 Reducing Heating and Cooling Loads
plug loads.
The term “heat load” refers to the rate of heat loss from a building dur-
The following subsections briefly explain how extraordinary savings ing the heating season. This heat has to be replaced by the heating sys-
can be achieved. Examples are presented of exemplary buildings from tem in order to maintain a steady indoor temperature, and so represents
around the world, spanning a wide range of climates, followed by infor- a load on the heating system. The term “cooling load” refers to the rate
mation on the initial investment cost of low energy buildings compared of unwanted heat gain during the cooling season, heat that must be
to conventional buildings. Much more detailed information can be found removed in order to maintain a steady indoor temperature.
in Harvey (2006).
Heating loads can be dramatically reduced through the use of a high
performance thermal envelope, consisting of: (i) high levels of insulation
10.4.3.2 Integrated Design Processes in the walls, ceiling, and basement; (ii) avoidance of thermal bridges; (iii)
windows and doors with a very high resistance to heat loss; and (iv) a
The key to achieving deep reductions in building energy use is to analyze high degree of airtightness, combined with mechanical ventilation with
the building as an entire integrated system, rather than focusing on incre- heat exchangers to recover heat or coldness from exhaust air and pos-
mental improvements to individual energy using devices. This requires sibly waste water, depending on the season.
a new approach to building design, referred to as the Integrated Design
Process (IDP) (Lewis, 2004). IDP requires setting ambitious energy effi- The heating energy requirement is the difference between heat losses
ciency goals at the very beginning of a project, and requires an early and useable internal and passive solar heat gains. High levels of insu-
brainstorming session involving all the members of the design team lation, combined with high performance windows and airtightness
to develop a number of alternative concepts for achieving the energy and coupled with mechanical ventilation and heat recovery, can read-
target. The integrated design process also entails two-way interaction ily reduce heating energy requirements by a factor of 4–10 compared
between the design team and the contractors. Simulation is an import- to current practices in cold climate regions. In areas with mild winters
ant tool in an IDP process. As a building will be operated over a large where previous practice was for no insulation, rather moderate levels of
range of outdoor climates and indoor states, simulation can tell what insulation can substantially reduce heating energy requirements, as well
happens in a part-load situation and help the design to achieve high as reduce summer cooling energy use by a factor of two or more (Florides
efficiency during part-load conditions. It often happens that the building et al., 2002).
and its system perform very well during the hot and cold season (the
design states), but very poorly during transitional seasons. Heat loss through high performance windows is so small that perim-
eter heating units, usually placed below windows to prevent drafts, can
As Harvey (2006) discusses, the steps in the most basic IDP are to: (i) be eliminated, even when winter temperatures dip to -40°C (Harvey
consider building orientation, form, thermal mass; (ii) specify a high per- and Siddall, 2008). When perimeter heating is eliminated, ductwork
formance building envelope and other measures to reduce heating and or hot water piping can be made shorter, as all the radiators can be
cooling loads; (iii) maximize passive heating, cooling, ventilation, and located closer to the central core of the building, with associated cost
daylighting; (iv) install efficient systems to meet remaining loads; (v) savings but also savings in fan and pump size and energy use. If the
ensure that individual energy using devices are as efficient as possible default design involves floor-mounted fan-coil units, their elimination
and properly sized; and (iv) ensure the systems and devices are properly will increase the amount of useable floor space.
commissioned.
Options to reduce the cooling load include:
16 Subsections 10.4.3 to 10.4.9 are a condensed discussion drawn from Harvey (2006,
2009, 2010). • orienting a building to minimize the wall area facing east or west;
678
Chapter 10 Energy End-Use: Buildings
• clustering buildings to provide some degree of self-shading, as in heat into the thermal mass while leaving it exposed to cool air during
many traditional communities in hot climates; nighttime ventilation.
• using high reflectivity building materials; for example, Parker Thermal mass can also be provided through phase change materials
et al. (2002) found that houses in Florida with white reflective (PCM), the most common being a paraffin wax that melts at around
roofs have a cooling-energy demand about 20–25% lower and 25ºC. The PCM can be embedded in drywall or plaster inside 50-μm cap-
peak power demand about 30–35% lower than houses with dark sules. The waxes will not rise in temperature above their melting point
shingles; as they melt, just as ice will not rise above 0ºC as it melts. Air in contact
with the plaster or spheres will rise only a few degrees above the melt-
• increasing insulation; for example, Florides et al. (2002) found that ing point of the wax. At night the waxes refreeze if they can be cooled
for a one-story house in Cyprus, adding 5cm of polystyrene insu- to below their melting point with cool night air, releasing the heat that
lation to the roof reduces the cooling load by 45% and the heat- they absorbed during the day as they melted.
ing load by 67%, while addition of 5cm of polystyrene insulation to
the walls reduces the remaining cooling load by about 10% and the The combination of switching to a high albedo surface and planting
remaining heating load by 30%; shade trees can yield dramatic energy savings. Rosenfeld et al. (1998)
calculated the impact on cooling loads in Los Angeles of increasing the
• providing fixed or adjustable shading, as external shading devices roof albedo of all five million houses in the Los Angeles basin by 0.35 (a
block 90% of incident solar heat, compared to 50% for internal roof area of 1000 km2), increasing the albedo of 250 km2 of commercial
devices (Baker and Steemers, 1999); roofs by 0.35, increasing the albedo of 1250 km2 of paved surfaces to
0.25 (by using whiter, limestone-based aggregates in pavement when-
• using windows with a low solar heat gain – as low as 25%, compared ever roads are resurfaced), and planting 11 million additional trees. In
to 70% for a clear double glazed window – and avoiding excessive the residential sector, they computed a total savings of 50–60%, with
window area, particularly on east- and west-facing walls; a 24–33% reduction in peak air conditioning loads. Akbari et al. (2008)
estimate that a net albedo increase for urban areas of about 0.1, which
• using highly efficient lighting and household appliances, electronics, they consider achievable by increasing both roof and pavement albedos
and office equipment to reduce internal cooling loads; by about 0.25 and 0.15 respectively, can achieve the equivalent of off-
setting about 44 Gt of CO2 emissions on a global scale. At the same time,
• utilizing thermal mass to minimize daytime interior temperature these measures would induce significant savings in cooling costs, with
peaks, combined with nighttime cooling; and an estimated savings potential in excess of US$1 billion/yr in the United
States. Growing vegetation on building walls can also provide important
• using vegetation to directly shade buildings and to indirectly reduce reductions in cooling energy use; simulations by Kikegawa et al. (2006)
cooling loads by reducing ambient air temperature through evapo- indicate a savings of 10–30% for residential buildings in Tokyo.
transpiration. Vegetation integrated into building surfaces, such as
walls and roofs, also contributes to cooling by reducing heat gains In hot-humid climates, the energy required to dehumidify air can
and through evapotranspiration. represent a significant fraction of the total cooling load. This portion of
the cooling load will not be reduced through measures such as shading,
Thermal mass does not reduce the heat gain by a building and so does external insulation, or use of thermal mass and windows with low-solar
not represent a reduction in cooling load (as defined here). However, a heat gain, so these measures will provide a smaller percentage savings
high thermal mass reduces the temperature increase for a given heat in overall cooling loads. However, materials that absorb moisture can
gain and, for short temperature spikes, can eliminate the need for air be placed at the internal surface of rooms so as to maintain nearly con-
conditioning. Porta-Gándara et al. (2002) simulated the cooling load for stant relative humidity inside. On dry days, the moisture can be released
housing built with traditional adobe bricks and modern hollow concrete back to the air through ventilation. This can greatly reduce the energy
blocks (having minimal thermal mass) in Baja California, and found the required for dehumidification.
air conditioner load of the former to be one-fourth that of the latter
during the hottest summer months. However, unless temperatures drop Thermal mass will be less effective in reducing daytime temperature-
sufficiently at night to remove the heat that enters the thermal mass by related cooling loads in humid climates because of the smaller day-night
day, the temperature of the thermal mass will build up over a period temperature difference in hot-humid climates than in hot-dry climates.
of days, so it will become less and less effective in limiting daytime In hot-humid climates, it is more appropriate to employ urban and build-
temperatures. The nighttime removal of daytime heat can be enhanced ing forms that promote air movement between and through buildings,
through deliberate nighttime ventilation of the building with outside air in order to employ low thermal mass to minimize the storage of heat so
when the outside air is sufficiently cool, as discussed in the next sub- that buildings can cool quickly whenever temperatures decreases (Koch-
section. External insulation will inhibit daytime penetration of outside Nielsen, 2002).
679
Energy End-Use: Buildings Chapter 10
Table 10.6 | Major strategies for reducing different energy uses in buildings in different climate zones.
Climate Zone
Heating • High levels of insulation • High levels of insulation and • Modest insulation • Minimal or no insulation
and air tightness with heat- air tightness with heat- • Windows with low solar heat • Windows with low solar heat gain
recovery ventilation recovery ventilation gain
• Windows with high thermal • Windows with high thermal
resistance and high solar resistance and low solar heat
heat gain gain
Cooling • Earth pipe • Earth pipe • Shading • Shading
• Shading • Shading • Reflective surfaces • Open structure with plenty of
• Thermal mass • Reflective surfaces • Thermal mass with external ventilation
• Thermal mass with external insulation and night ventilation • Minimal thermal mass
insulation and night ventilation • Compact form and self shading • Solar-driven desiccant
• Evaporative cooling dehumidification and evaporative
cooling
Ventilation • Hybrid passive-mechanical • Hybrid passive-mechanical
ventilation ventilation
High performance thermal envelopes can readily reduce heating energy a warmer body, and increases the acceptable air temperature due to
requirements by 75–90% in cold climates, while modest levels of insu- enhanced psychological adaptation to warmer conditions in naturally-
lation may eliminate the need for winter heating altogether in regions ventilated buildings compared to buildings with mechanical ventilation.
with mild winters. Modest levels of insulation are also effective in redu-
cing cooling loads by about half in hot climates. Thermal mass, combined Natural ventilation can be achieved through:
with external insulation and nighttime ventilation, can largely eliminate
cooling requirements in hot-dry climates. In hot-humid climates, the • cross ventilation and wind, a technique that has been widely
potential to reduce cooling loads is smaller, due to the greater import- employed in traditional architecture around the world and in pas-
ance of dehumidification loads and the smaller diurnal temperature sive ventilation stacks that are commonly used in north European
range. In both hot-dry and hot-humid climates, however, the remaining residential buildings;
cooling loads can be handled through a variety of low-energy systems.
• solar chimneys, which consist of a tower in which air is heated and
Table 10.6 summarizes the features of low-energy buildings that depend rises, drawing cooler outside air through the building. A striking
on the climate where the building is situated. These features largely pertain example is the Building Research Establishment offices in Garston,
to building form and envelope, and the applicability of earth pipe, evap- United Kingdom, which is illustrated in Figure 10.A.3.in the GEA
orative, or desiccant cooling systems. These and other building features Chapter 10 online appendix;
and internal energy loads are discussed in the following subsections.
• atria, which can induce natural ventilation through proper place-
ment of air inlets and outlets, along with shading controls or pas-
10.4.3.4 Passive and Passive-low-energy Heating and Cooling sive measures, such as the geometry of laser-cut glazing, to avoid
overheating in summer;
Having reduced the cooling load through the techniques described
above – often by a factor of two or more – the next strategy in priority • cool towers, in which water is pumped into a honeycomb medium
is to use passive and/or passive-low-energy cooling strategies. A purely at the top of a tower and allowed to evaporate, thereby cooling
passive cooling technique requires no mechanical energy input at all. the air at the top of the tower, which then falls through the tower
Other techniques involve small inputs of mechanical energy to enhance and into an adjoining building under its own weight. These have
what are largely passive cooling processes. Some examples of passive been used in the Visitor Center at Zion National Park, United States
and passive-low-energy cooling techniques are described below. (Torcellini et al., 2002), and at the Torrent Pharmaceutical Research
Centre in Ahmedabad, India (Ford et al., 1998); and
Natural Ventilation
Natural ventilation has a cooling effect whenever the outdoor air tem- • airflow windows, which are designed to facilitate the passage of
perature is below the indoor air temperature. It reduces the perceived outgoing exhaust air or incoming fresh air between the glazing
temperature due to the greater ability of moving air to remove heat from in a double glazed window. In the Tokyo Electric Power Company
680
Chapter 10 Energy End-Use: Buildings
(TEPCO) research and development (R&D) center, constructed in can reduce cooling energy use in a two-story house by up to 80% com-
Tokyo in 1994, this technique reduced the inward heat transfer by pared to a fully air conditioned house.
one-third to two-thirds compared to double glazed windows with
interior or built-in blinds, and eliminated the need for perimeter air Evaporative Cooling
conditioning (Yonehara, 1998). Evaporation can cool water down to the wet bulb temperature (Twb).17
The difference between Twb and the ambient temperature is greater the
Nighttime Passive and Mechanical Ventilation lower the absolute humidity, so the potential cooling effect of evapora-
Where the day-night temperature variation is at least 5–7 degrees, cool tive cooling is greater in arid regions, although the availability of water
night air can be mechanically forced through hollow core ceilings or could be limiting. Evaporative cooling can provide comfortable condi-
through the occupied space to cool the building prior to its use the tions most of the time in most parts of the world (see Harvey, 2006).
next day. Where artificial air conditioning is still needed by day, external A number of residential evaporative coolers are on the market in the
air can be pre-cooled by passing it through the ceiling that has been United States. Energy is required to operate the fans, which draw out-
ventilated at night. Effective night ventilation requires a high exposed side air through the evaporative cooler and directly into the space to
thermal mass, an airtight envelope, minimal internal heat gains, and a be cooled, or into ductwork that distributes the cooled air. Simulations
building configuration that induces natural airflows so that minimal fan for a house in a variety of California climate zones indicate savings in
energy is required. In such buildings in the southern United Kingdom, annual cooling energy use of 92–95%, while savings are somewhat
as well as in Kenya, cooling energy savings of 30–40% can be achieved less (89–91%) for a modular school classroom (DEG, 2004). Evaporative
this way, as simulations for both places have shown (Kolokotroni, 2001). cooling has been widely used in western China (such as XinJiang and
External insulation should be used in order to inhibit the inward pene- Gansu Provinces) and some regions in India. It can provide very good
tration of daytime outside heat while leaving the thermal mass exposed cooling for office buildings, hotels, and shopping malls with outdoor
to the cooling effect of nighttime ventilation and free to absorb internal temperatures as high as 38°C. As the energy savings would be much
heat during the day. less in humid climates, a better approach is to enhance the evaporative
cooling capacity using desiccants, as described later.
For Beijing, da Graça et al. (2002) found that thermally- and wind-
driven nighttime ventilation eliminates the need for air condition- Underground Earth Pipe Cooling
ing of a six-unit apartment building during most of the summer, Outside air can be drawn through a buried coil, cooled by the ground,
when an extreme outdoor peak of 38°C produces a 31°C indoor and used for ventilation purposes. Simulations by Lee and Strand (2008)
peak. Simulations by Springer et al. (2000) indicate that nighttime indicate that earth pipes can meet 70% of the June-August cooling load
ventilation is sufficient to prevent peak indoor temperatures from in Illinois and 65% in Spokane, Washington. The performance of such
exceeding 26°C over 43% of California’s geography in houses that a system can be characterized by the ratio of the rate of heat removal
include improved wall and ceiling insulation, high performance by the air exchange to the power used by the fans – analogous to the
windows, extended window overhangs, tight construction, and coefficient of performance (COP) of a heat pump or air conditioner. The
modestly greater thermal mass compared to standard practice in measured COP of a ground loop for a building in Germany is 35–50
California. (Eicker et al., 2006). Argiriou et al. (2004) built and tested an earth pipe
that was coupled to a photovoltaic array on a building in Greece that
Where mechanical air conditioning is used in combination with night directly powers a 370W DC motor, thereby avoiding the need for DC
ventilation, the energy savings from night ventilation depend strongly to AC conversion normally associated with PV power. The fan speed
on the daytime temperature setpoint. For a three-story office building increases as the incident solar radiation increases, matching the need
in La Rochelle, France, Blondeau et al. (1997) found through computer for increased cooling. The measured average COP (based on DC power
simulation that night ventilation with a 26°C setpoint requires only 9% output) was about 12. In climates with warmer mean annual tempera-
of the cooling energy as the case with a 22°C setpoint and no night tures, the ground temperature will be warmer, so the benefits of earth
ventilation for this particular building and climate. pipe cooling will be smaller.
The combination of external insulation, thermal mass, and night ventila- Water can also be circulated through underground pipes and pre-cooled
tion is particularly effective in hot-dry climates, as there is a large diur- or pre-heated. This is ideal in conjunction with radiant floor heating or
nal temperature variation in such climates, and placing the insulation radiant ceiling cooling, and has been used in Europe, usually with a heat
on the outside exposes the thermal mass to cool night air while min- pump to enhance the heat extraction from or transfer to the ground.
imizing the inward penetration of heat into the thermal mass. As previ-
ously noted, low thermal mass and an open design with plenty of cross
ventilation are normally recommended in hot humid climates, although 17 Wet bulb temperature is a type of temperature that reflects the physical properties
of a system with a mixture of a gas and a vapor, usually air and water vapor. It is the
Tenorio (2007) finds that in humid tropical areas of Brazil, thermal mass lowest temperature that can be reached by the evaporation of water only (Hart &
combined with night ventilation and selective use of air conditioning Cooley Inc. 2009)
681
Energy End-Use: Buildings Chapter 10
Desiccant Cooling and Dehumidification system. They make very effective use of electricity, as the ratio of heat
Solid or liquid desiccants18 can be used to remove moisture from air, supplied to electricity used (the COP) is at least three for ground source
with the desiccant subsequently regenerated using solar thermal heat heat pumps and at least six to seven for exhaust air heat pumps
such as can be provided by flat-plate solar thermal collectors. Desiccants (Halozan and Rieberer, 1997). Heat pumps provide one means of decar-
combined with conventional heating for regeneration are sometimes bonizing building heating, once the electric grid itself is decarbonized.
used in supermarkets today, where their substantial drying capacity is If a building has a high performance thermal envelope, so that it loses
an advantage over traditional dehumidification techniques. If the air is heat very slowly when the heating system is turned off, heat pumps –
over-dried, evaporative cooling can be used to bring the air temperature like air conditioners – can serve as a dispatchable electricity loads that
close to the desired final temperature, with only supplemental cooling can, to some extent, be turned on and off to match variations in wind
with mechanical air conditioners. Heat is required to regenerate the des- or solar generated electricity supply.
iccant. A great advantage of desiccant cooling systems is that they avoid
overcooling the air and then reheating it for dehumidification purposes. State-of-the-art biomass pellet boilers, with efficiencies of 86–94%, are
However, the COP of a desiccant system is typically only about 1.0, another option for heating with renewable, carbon-neutral energy.
compared to typical values of four to six for electric chillers, so primary
energy use may increase or decrease, depending on the efficiency of
the electric power plant that supplies the displaced electricity and the 10.4.3.6 Heating, Ventilation, and Air Conditioning (HVAC)
extent of overcooling. However, in the hot and humid climate of Hong Systems
Kong, solid desiccant systems can reduce overall energy use for cooling
and dehumidification by 50% if solar thermal energy is used for regen- In the crudest HVAC systems, heating or cooling is provided by circulat-
eration of the desiccant (Niu et al., 2002). ing enough air at a sufficiently warm or cold temperature to maintain
the desired room temperature. The volume of air circulated in this case
Passive heating techniques is normally much greater than what is needed for ventilation purposes,
Passive heating refers to the simple absorption of solar radiation inside in order to remove contaminants and provide fresh air. The energy
a building, preferably by elements with a high thermal mass such as required to transport a given quantity of heat or coldness by circulating
stone walls or concrete walls and floors, thereby minimizing overheat- water is 25–100 times less than the energy required by circulating air.
ing during the day and providing the opportunity to slowly release heat Thus, by using chilled or hot water for temperature control and circu-
at night. Passive heating can occur directly, through absorption of solar lating only the volume of air needed for ventilation purposes – that is,
radiation within the space to be heated, or indirectly, through thermal separating the ventilation and heating or cooling functions – consider-
mass located between the sun and living space. able energy savings are possible. This is a system level change.
10.4.3.5 Heating equipment With regard to residential buildings in cold climates, distributing heat by
circulating warm water rather than warm air can reduce the energy used
Commercial buildings, multi-unit residences, and many single-family to distribute heat by a factor of 10 to 15 and eliminates the infiltration of
residences, especially in Europe, use boilers that produce hot water or, outside air through pressure differences induced by unbalanced airflow
in some exceptional cases, steam, that is circulated, generally through in ductwork (Harvey, 2006; see also Chapter 4). In radiant floor systems,
radiators. Efficiencies (ratio of heat supplied to fuel use) range from 75% the entire floor serves as a radiator by circulating warm water through
to 95%, not including distribution losses. Modern residential furnaces, pipes embedded in the floor. In this way, heat can be delivered at the
which are used primarily in North America and produce warm air that coolest possible temperature – at 30°C rather than at 70–90°C – which
is circulated through ducts, have efficiencies ranging from 78% to 96%, improves the efficiency of furnaces or boilers and especially improves
again not including distribution system losses. Old equipment tends to the efficiency of heat pumps. It would also improve the efficiency of
have an efficiency in the range of 60–70%, so new equipment can pro- district heating and cogeneration systems by allowing a lower tempera-
vide substantial savings. Space heating and hot water for consumptive ture of the hot water provided to such systems. Ventilation requirements
use, e.g., showers, can be supplied with heat from small wall-hung boil- can then be met with a much smaller airflow that, during heating or
ers with an efficiency in excess of 90%. cooling seasons when windows are closed, is circulated with fans. Heat
exchangers allow 80–95% of the heat in the outgoing exhaust air to be
Heat pumps are another option for heating. They transfer heat from transferred to the incoming fresh air.
something that is relatively cold, such as the outdoor air, ground, or
outgoing exhaust air, to the warmer ventilation air or hot water heating In commercial buildings, three features of advanced HVAC systems with
significant energy savings potential are (1) chilled ceiling cooling, (2)
18 A desiccant is a substance that induces or sustains a state of dryness (desiccation) in
displacement ventilation, and (3) demand-controlled ventilation. Chilled
its local vicinity in a moderately well-sealed environment. In this context desiccants
are used to dehumidify air in a physical or chemical way rather than through air ceiling (CC) cooling, which was pioneered in Europe in the 1980s,
conditioning. involves circulating water at a temperature of 16–20°C through radiant
682
Chapter 10 Energy End-Use: Buildings
panels that cover a large fraction of the ceiling area, or through hollow 6
5.35
concrete ceiling slabs. Stetiu and Feustel (1999) carried out simulations
of buildings with all-air and combined air/CC cooling systems for a var- 5
Heating Cooling 4.85
iety of climates in the United States, assuming the same rate of intake
of outside air for the two cases. They found that radiant cooling reduces 4
COP Value
energy use by an amount ranging from 6% in Seattle to 42% in Phoenix.
3
The savings are smaller in hot-humid or cool-humid climates than in
hot-dry climates because relatively more of the total air conditioning Introducon of
2 Top runner
energy is used for dehumidification, which is not affected by the choice Approach
of all-air versus air/CC chilling.
1
683
Energy End-Use: Buildings Chapter 10
tankless point-of-use water heaters, which are common in Europe and nents of the lighting system (described in Rubinstein and Johnson,
Asia. However, electrical tankless water heaters can amplify peak elec- 1998).
trical loads. Solar water heaters can supply 50% or more of hot water
requirements in most parts of the world and require a storage tank. Light output is measured in lumens (lm), which takes into account dif-
ferences in the sensitivity of our eyes to different wavelengths of light.20
Heat pumps using CO2 as a working fluid are ideal for hot water appli- The ratio of lumens of light output to watts of energy used by a lamp is
cations, as they can more readily reach the required 55–60°C water called the efficacy. At present,
temperature. Compared to conventional combustion type water heaters,
they enable about 30% energy conservation and about 50% reduction • compact fluorescent lamps (CFLs) are about four times as effica-
in CO2 emissions given the electricity mix of Japan.19 cious as incandescent lamps, two to three times as efficacious as
halogen infrared reflecting (HIR) lamps, and three times as effica-
Finally, substantial energy savings are often possible by upgrading exist- cious as halogen lamps – all of which can be replaced in almost all
ing hot water boilers. Older hot water boilers have efficiencies as low applications;
as 60%, compared to 80–85% for a modern non-condensing boiler and
92–95% for a condensing boiler. • the 80-series T8 and T5 fluorescent tubes are about 60% more effica-
cious than T12 tubes used in old lighting and 25% more efficacious
than standard (70-series) T8 tubes; and
10.4.3.8 Lighting
• the ceramic metal halide lamp is about twice as efficacious as the
Lighting energy use constitutes 25–50% of the total electricity use in HIR lamp, which it can replace.
commercial buildings in OECD countries, and about 10% in residential
buildings (see Figure 10.9 and Figure 10.A.2). Lighting energy use can be Light-emitting diodes (LEDs) have the potential to be substantially more
reduced by 75% or more through: (1) better design of lighting systems, efficacious than any of the above. Commercially available LEDs cur-
including provision for task lighting; (2) maximizing the use of daylight, rently have an efficacy of about 30 lm/W, compared to 10–17lm/W for
with light and occupancy sensors to add electric lighting only as needed; incandescent lamps, 50 lm/W for CFLs, 105lm/W for the T5 fluorescent
and (3) use of the most efficient lighting equipment (IEA, 2006). tubes, and up to 140lm/W for high-pressure sodium lamps. However,
laboratory research LEDs have achieved an efficacy of up to 152lm/W
Advances in window technology make it possible to increase window at low current (Den Baars, 2008), and it is thought that efficacies of
area to up to 40–60% of wall area without increasing heat loss in win- 150–200lm/W will be eventually achieved in commercial products. This
ter, after accounting for solar heat gain, and with minimal impact on would reduce electricity requirements by up to a factor of two compared
cooling loads in summer. Detailed measurements and/or simulations to the best fluorescent tubes, a factor of four compared to CFLs, and
demonstrate annual savings of 30–80% from daylighting of perimeter a factor of 20 compared to the least efficacious incandescent lamps,
offices in commercial buildings (Rubinstein et al., 1998; Jennings et al., which are still widely used. The effectiveness of LEDs is further improved
2000; Reinhart, 2002; Bodart and De Herde, 2002; Li and Lam, 2003; Atif by the fact that LEDs produce light that can be directed into only the
and Galasiu, 2003). The economic benefit of daylighting is enhanced by directions where it is needed. By selective lighting, LEDs will be able
the fact that it reduces electricity demand most strongly when the sun to achieve energy savings compared to other lamps even before they
is strongest, which is when the daily peak in electricity demand tends to achieve parity on a lamp-efficacy basis.
occur during summer. Daylighting can also reduce cooling loads. This is
because the luminous efficacy (the ratio of light to heat) of natural light
is 25–100% greater than that of electric light systems. 10.4.3.9 Commissioning, Control Systems,
and Monitoring
In retrofits of fluorescent lighting systems, 30–50% lighting electricity
savings can be routinely achieved. With considerable effort, 70–75% Commissioning is the process of systematically checking that all of a
savings in retrofits are possible. In new construction, 75% and larger building’s systems – security, fire, life and safety, HVAC, lighting, elec-
savings compared to current standards can be readily achieved. These tric, etc. – are present and function properly. It also involves adjusting
remarkable energy savings could be increased yet further through the system and its controls to achieve the best possible performance.
advances in the efficiency and performance of the individual compo- Commissioning costs about 1–3% of the HVAC construction cost, but in
20 Light is a form of energy. However, the efficiency of a lamp in producing light cannot
19 Calculation based on 43°C quantity of hot water conversion (by Institute for Building be specified as the ratio of watts of light output to watts of electrical energy input.
Environment and Energy Conservation in Japan); primary energy and CO2 emission This is because not all watts of light are equal; our eyes are more sensitive to some
intensity for electricity are based on Japanese Law. wavelengths of radiation than to others.
684
Chapter 10 Energy End-Use: Buildings
the United States, only 5% of new buildings are commissioned (Roth et computers can reduce power consumption by as much as 5W to 65W.
al., 2002). Consequently, the control systems never operate as intended Ultimately, energy use can be minimized by proxying, in which a var-
in many buildings. Even if a building is commissioned after construction, iety of internet connected devices maintain an internet presence while
it is important to continue adequate monitoring of the HVAC system. In in sleep mode, unlike the current situation where those devices are
a program involving over 80 buildings mentioned by Piette et al. (2001), kept in a higher power mode only in order to remain connected to the
improved controls reduced total-building energy cost by over 20% and internet (Nordman and Christensen, 2010). Servers are designed for
combined heating and cooling energy costs by over 30%. maximum demand, and thus are usually underutilized. Virtualization
involves software that allows one server to take on the functions of
several, while the others reduce power. Virtualization seems applicable
10.4.3.10 Appliances, Consumer Electronics, and Office to 80% of servers, with potential energy savings of 70%. Computer
Equipment components are also expected to become more efficient. Laptops are
efficient in order to maximize battery life. Replacing desktop computers
Residential appliances and office equipment are important uses of with laptop technology provides large energy savings. Replacing disk
energy in their own right and, for office equipment and electronics in drives with solid state drives could reduce that component’s energy use
particular, can be an important source of internal heat gain that needs by 70% or more.
to be removed by the cooling system during summer from perimeter
offices and year round from internal offices. Display Technologies (e.g., televisions and monitors)
Energy savings of 50–70% are possible from active power management,
Appliances, consumer electronics, and office equipment in buildings are such as controlling the brightness of display technologies based on
responsible for a large share of a building’s electricity consumption and ambient lighting, only operating in the presence of a viewer, and lower
a share of natural gas use. In the United States they account for 40% of brightness for dark colors (color content). In plasma TVs, energy use can
the electricity consumption and 12% of the natural gas use of buildings be reduced with new phosphors, improved cell design, improved gas
(US DOE, 2008; see also Chapter 1). mixtures, and optimized electronic circuits. In current TV designs, signifi-
cant light loss occurs from the backlight to the viewer. Future designs
The energy use of most appliances used in buildings can be significantly may eliminate backlighting completely, using organic light emitting
reduced through increased equipment efficiency. Energy efficiency has diodes (OLEDs) that produce light themselves, currently in use in some
increased gradually over time, as manufacturers develop new efficiency mobile phones. Prototypes larger than 50 inches (diagonal screen size)
design options and incorporate them into their products as an enhance- have been demonstrated. Alternative technologies under development
ment of quality and performance. include efficient electronic circuits, quantum dots, and laser display
phosphors.
New systems designs will reduce the energy requirements of energy ser-
vices. For example, daylighting and controls or passive building shell design Motors
measures reduce the energy required for thermal comfort. Further signifi- Motors come in many sizes and have many residential and commercial
cant reductions in energy requirements for energy services can be identified applications, making them one of the most ubiquitous components in
by examining specific technologies (IEA, 2008a; National Research Council, energy-using equipment. Most motors are single-speed induction. The
2009). Some cross-cutting technologies offer significant promise for redu- most efficient on the market are brushless DC permanent magnet motors
cing energy use for devices providing a range of energy services. Examples (BDCPM), which avoid rotor magnetization losses and have lower heat
include: electronics, computing and office equipment, display technologies losses, providing a secondary benefit of reduced cooling energy. BDCPM
(e.g., organic LEDs), motors (e.g., brushless DC permanent magnet rotors motors require less material and operate at higher efficiency when
or variable reluctance motors), domestic refrigeration, and ceiling fans under low loads than single-speed motors. Major reductions in energy
(Garbesi and Descroches, 2010). Sensors and controls for energy using use by motors could be achieved with a BDCPM having interior mag-
devices deserve special attention, since they have many applications that nets in the motor, advanced core design, low resistance conductors, and
can eliminate waste by limiting energy use to times and places when occu- low friction bearings. Further savings would result by including variable
pants are present and in need of the specific energy service. speed in the design.
685
Energy End-Use: Buildings Chapter 10
identified even further opportunities to reduce energy use. Today, the Direct combustion ABSs are cookstoves that directly burn biomass
most efficient models available use 30% less energy than the maximum fuels. They include cookstoves designed to burn fuelwood, agricultural
allowed. Research is underway on alternatives to vapor compression, residues, and charcoal. The stoves fall typically into either portable, low-
including magnetic and thermo-acoustic refrigeration. The potential mass stoves (like the Rocket, which Envirofit disseminated in Africa and
energy savings are not yet known. Asia, and the Darfur stove aimed at refugee camps in Africa) and high-
mass chimney stoves (like the Patsari and Onil stoves disseminated in
Ceiling Fans Latin America, and most of the Chinese models). These include improve-
Fans suspended from the ceiling can provide thermal comfort in sum- ments in the combustion chamber (such as the Rocket “elbow”), insu-
mer in some climates without compressor-driven air conditioning. Most lation materials, heat transfer ratios, stove geometry, and air flow (Still,
fans have a light attached. A typical fan with a shaded pole motor has a 2009). Some models include a fan. As a result, combustion efficiency
power draw of 35W, with incandescent lighting requiring an additional is greatly improved compared to open fires. The cost ranges between
120W. An Energy Star21 fan requires 30W, and its fluorescent lights US$10 or less for the simpler models, to more than US$100 for the more
require 30W. The most efficient model has a motor that requires 10W. sophisticated models. Fuel savings reach from 30% to 60%, measured
A conceivable design with a DC motor, airfoil shaped blades and LED in field conditions (Berrueta et al., 2008). Indoor air pollution levels are
lights could draw as little as 5W for the fan, and 10W for the lights. reduced up to 80–90% compared to the open fires in models with chim-
neys (Masera et al., 2007; Smith et al., 2007). Carbon mitigation has
In large spaces, mostly commercial applications, substituting one large been estimated to range from 1–2 tCO2-eq/yr for the simpler models,
fan for several smaller ones results in higher efficiency. The same vol- and have been measured in the field to range between 3–9 tCO2eeq/
ume of air can be moved with larger blades at lower speed, and a more- yr for more sophisticated models such as the Patsari model in Mexico
than-linear decrease in energy use. (Johnson et al., 2008).
Ethanol stoves have also been developed and tested in India, Nigeria,
21 Energy Star means that products meet strict energy efficiency guidelines set by US and other African countries (Rajvanshi et al., 2007). The Indian stove
Environmental Agency. Energy Star qualified ceiling fan/light combination units are
over 50% more efficient than conventional units and use improved motor and blade uses low-concentration ethanol (50%) and the Nigerian stove uses an
designs (US EPA 2011). ethanol-gel to minimize risks of explosion.
686
Chapter 10 Energy End-Use: Buildings
Figure 10.18 | A stove with a thermoelectric unit includes a 2–4W power unit, which
helps generate 100 lumens with a LED-based lantern. Source: BioLite, 2011. Future Needs
Critical needs for ABSs include increased R&D, particularly for new insu-
lating materials, as well as robust designs that endure several years of
rough use. More field testing and stove customizing for user needs is
Hybrid, or multiple-service, stoves serve multiple energy end-uses. There is required. There is also the need for strict product specifications and test-
currently a rapid development of these cookstoves. Commercially, stoves ing and certification programs. Finally, it is important to better under-
that provide both cooking and water heating are well established in Brazil stand the patterns of stove adoption given multiple devices and fuels, as
(e.g., Ecofogao) and China (many models). A new exciting innovation is well as mechanisms to foster long-term use.
the development of thermo-electric modules, which will allow the stove’s
blower to generate electricity for lighting, either through CFLs or LED
lanterns. Pilot units have been tested in Nepal. A modified Rocket model 10.4.4 Incorporation of Active Solar Energy into
(Figure 10.18) shows significant improvements in stove performance as a Buildings
result of the blower and is expected to sell for US$30 (BioLite, 2009).
10.4.4.1 Key messages
Table 10.7 shows cooking costs for different types of stoves used in
India. It can be seen that all the stoves are cheaper than LPG on an Potential active solar energy systems include PV panels for generation of
annualized cost basis. Some have high capital costs and thus need electricity, solar thermal collectors for production of domestic hot water,
financial mechanisms or subsidies to foster dissemination. the production of hot water or heating of air for space heating, the
production of hot water to operate desiccant or other thermally-driven
Impact of Current Dissemination Programs cooling systems, and the active collection and concentration of sunlight
A second major innovation in the field of ABSs has to do with the for daylighting. PV panels on all suitable rooftops and façades of exist-
production and marketing of the stoves. State-of-the-art manufactur- ing buildings in a range of developed countries could supply 15–60% of
ing facilities are now in place that aim for disseminating stoves on a current total electricity demand in these countries.
mass scale while at the same time assuring a quality product. Improved
stoves, designed to appeal to consumers in various market segments
and to be suitable for microfinance mechanisms, have been developed. 10.4.4.2 Active solar technologies
As a result, several companies now produce over 100,000 stoves/yr.
More than 70 stove programs are currently in place worldwide, with The design of low energy buildings incorporates passive solar energy in
recently launched large-scale national programs in India and Mexico, as many forms – passive solar heating, passive ventilation and cooling, and
well as large donor-based programs in Africa. daylighting – and is part of the package that can achieve 75% or greater
savings in overall space conditioning energy use compared to conven-
The market for ABSs has also benefited from the recognition that using tional local practice. This level of energy use is so low that much or all of
multiple fuels, rather than complete fuel switching to LPG or electricity, is the remaining energy demand, or even more, can be met through active
the norm in many developing countries (Masera et al., 2000). Therefore, solar energy features such as photovoltaic panels on roofs and façades
even households that already have access to LPG and kerosene con- and solar thermal collectors. Thermal energy from solar collectors can be
tinue using woodfuels, and many times an early-adopter market for ABS used for space heating, domestic hot water, or solar air conditioning, the
687
Energy End-Use: Buildings Chapter 10
latter either driving absorption chillers or desiccant-based dehumidifica- incorporate PV into a building (Eiffert,2003). These benefits include the
tion and cooling systems. role of BiPV as a façade element, replacing conventional materials and
providing protection from UV radiation; providing thermal benefits such
Active solar energy systems, while sometimes driving the use of off- as shading or heating; augmenting power quality by serving a dedicated
site energy by the building to zero and even making the building a net load; serving as backup to an isolated load that would automatically
exporter of energy, tend to be expensive at present. This is in contrast to separate from the utility grid in the event of a line outage or disturbance;
the system level measures discussed above, which can deliver the first and reducing power transmission bottlenecks and the need for peaking
75% or even more of the transition to zero-energy buildings at very low power plants. The grid and load saving benefits to the power utility are
cost or even with a net savings in investment cost (as discussed below). worth about US$100–200/yr/kW of peak power produced. Inasmuch as
BiPV is used as part of an aesthetic design element in a building, it
The potential energy generation from building integrated photovoltaics can replace rather expensive building materials. The cost of PV modules
(BiPV) is large. Gutschner et al. (2001) estimated the potential power ranges from US$400–1300/m2. By comparison, the costs of envelope
production from BiPV in member countries of the International Energy materials in the United States that PV modules can replace range from
Agency, taking into account architectural suitability (based on limitations US$250–350/m2 for stainless steel, US$500–750/m2 for glass wall sys-
due to construction, historical considerations, shading effects, and the use tems, to at least US$750/m2 for rough stone and US$2000–2500/m2 for
of the available surfaces for other purposes) and solar suitability (restrict- polished stone (AEC, 2002).
ing the useable roof and façade area to those elements where the solar
irradiance is at least 80% of that on the best elements in a given loca-
tion, defined separately for roof and façade elements). They estimate that 10.4.4.2 Net-zero-energy buildings
15% to almost 60% of current total national electricity demand could be
provided using all available roof and façade surfaces, depending on the The ‘net-zero-energy building’ is taken here to mean a building that
country. Thus, systematic incorporation of BiPV into new buildings, and generates onsite and exports to the grid an amount of electricity suf-
into old buildings when they are renovated and whenever this is feasible, ficient to offset the amount of electricity drawn from the grid at other
can make an important contribution to electricity supply. times plus other energy (such as fuels for heating) that is supplied to the
building. Requiring buildings to be zero-net-energy is not likely to be the
PV modules typically cost between below US$2 and 5 per peak watt of lowest cost or most sustainable approach in eliminating fossil fuel use,
output (US$2–5/Wp, see Chapter 11.7), with total system costs including and is sometimes impossible. Net-zero-energy buildings are feasible
installation typically running from US$4/Wp to US$9/Wp (IEA, 2008c). only in certain locations and for certain building types and uses.
However, a number of studies have identified ways in which the cost
of modules might eventually reach US$1/Wp (Hegedus, 2006; Swanson, Highly energy-efficient residential and commercial buildings have a
2006) or even US$0.2–0.3/Wp (Zweibel, 2005; Green, 2006). Keshner total energy intensity of 50–100 kWh per m2 of floor area/yr (compared
and Arya (2004) have presented perhaps the most aggressive scenario to a typical value of 200–400 kWh/m2/yr today), which corresponds to
for future cost reductions, with an installed cost of US$1/Wp or less for an annual average energy flow of 5.7–11.4 W/m2. Annual average solar
various thin film modules. At 5% financing over 20 years, a US$1/Wp irradiance ranges from 160 W/m2 (middle latitudes) to 250 W/m2 (in the
installed cost translates into an electricity cost of about US¢4/kWh for sunniest regions). If 80% of the roof area is covered with PV modules
12% efficient modules in sunny locations (2000 kWh/m2/yr irradiance) and converted to electricity with a net sunlight-to-AC electricity conver-
and US¢6.7/kWh for 7% efficient modules. sion efficiency of 10%, and 20% of the roof area collects solar energy
that is converted to useful heat (which can be used for space heating,
BiPV provides a number of benefits beyond the mere provision of elec- production of domestic hot water, and desiccant cooling and dehumidi-
tricity. This should be taken into account in deciding whether or not to fication) with an efficiency of 50%, the overall capture of solar energy
688
Chapter 10 Energy End-Use: Buildings
per unit of roof area is in the order of 30–45 W/m2. Although additional savings in heating energy use are reported, the savings compared to the
electricity could be generated from some PV panels on the equator-, same house built according to conventional standards range from 23%
east-, or west-facing façades if shading is not an issue, total building to 98%, with eight houses achieving a savings of 75% or better.
energy demand will greatly exceed the solar energy supply in buildings
that are more than a few stories high, even if the buildings are highly Several thousand houses that meet the Passive House Standard – a house
energy efficient. It is typically single-family or low-rise, lower-density with an annual heating requirement of no more than 15kWh/m2/yr, irre-
multifamily residential neighborhoods that can become zero net energy spective of the climate – have been built in Europe (Passivehaus Institut,
users for their energy needs, excluding transportation. Therefore, care 2009). By comparison, the average heating load of new residential build-
needs to be exercised that ill-conceived, uniform, zero-energy housing ings is about 60–100kWh/m2/yr in Switzerland and Germany, but about
mandates do not incentivize further urban sprawl that leads to further 220kWh/m2/yr for the average of existing buildings in Germany and
automobile dependence and growth in transport energy use. 250–400kWh/m2/yr in central and eastern Europe (Enerdata, 2009). Thus,
Passive Houses represent a reduction in heating energy use by a factor
As discussed in Chapter 11, many forms of off-site renewable energy of four to five compared to new buildings, and by a factor of 10–25 com-
are less expensive than on-site PV generation of electricity, and are thus pared to the average of existing buildings. Technical details, measured
able to achieve more mitigation and sustainable energy supply from the performance, design issues, and occupant response to Passive Houses in
same limited resources. Although PV electricity is currently expensive, various countries can be found in Krapmeier and Drössler (2001), Feist
as noted above, there are good prospects for a factor of two reduction et al. (2005), Schnieders and Hermelink (2006), and Hastings and Wall
in the installed cost of PV systems in buildings. Furthermore, PV must (2007a, 2007b), with full technical reports at www.cepheus.de.
compete against the retail rather than the wholesale cost of electricity
produced off-site. On-site production of electricity also improves over- Holton and Rittelmann (2002), Gamble et al. (2004), and Rudd et al.
all system reliability by relieving transmission bottlenecks within urban (2004) have shown how a series of modest insulation and window
demand centers. improvements can lead to energy savings of 30–75% in a wide var-
iety of climates in the United States. In all three studies, alterations in
In aiming for zero fossil fuel energy use as quickly as possible, an eco- building form to facilitate passive solar heating, use of thermal mass
nomical energy strategy would implement some combination of: (1) combined with night ventilation to meet cooling requirements, where
reduced demand for energy; (2) use of available waste heat from indus- applicable, or use of features such as earth pipe cooling, evaporative
trial, commercial, or decentralized electricity production; (3) on-site pro- coolers, or exhaust air heat pumps are not considered. Thus, the full
duction of energy; and 4) off-site supply of C-free energy, taking into potential is considerably greater. Demirbilek et al. (2000) found, through
account all the costs and benefits and the reliability of various options. computer simulation, that a variety of simple and modest measures can
reduce heating energy requirements by 60% compared to conventional
designs for two-story single-family houses in Ankara, Turkey.
10.4.5 Worldwide Examples of Exemplary High-
Efficiency and Zero-energy Buildings22 For single-family houses in the hot and relatively humid climate of
Florida, Parker et al. (1998) show how a handful of very simple meas-
10.4.5.1 Key Messages ures – attic radiant barriers, wider and shorter return air ducts, use of
the most efficient air conditioners with variable speed drives, use of solar
Numerous examples exist worldwide of residential and commercial hot water heaters, efficient refrigerators, lighting, and pool pumps – can
buildings that have annual energy use that is up to two to four times reduce total energy use by 40–45% compared to conventional practices.
less than that of recently-built conventional buildings in the same juris- These savings are achieved while still retaining black asphalt shingle
dictions. The most dramatic energy savings are seen in heating energy roofs that produce roof surface temperatures of up to 82°C. Further
use, where many buildings have been built with heating requirements significant reductions in cooling energy requirements can be achieved
that are four times less than that for recent conventional new build- through increasing the albedo surface of roofs (Akbari et al., 2008).
ings and up to ten times less than that of the existing stock average.
689
Energy End-Use: Buildings Chapter 10
buildings energy use survey. They then used energy models to simulate (0.27–0.43) and external sun shading. The buildings also have a high
the buildings’ energy performance (Torcellini and Crawley, 2006). The degree of insulation and many have triple glazed windows. Nine of the
results of this exercise were as follows: buildings have total onsite energy use of 25–55kWh/m2/yr and 10 had
55–110kWh/m2/yr energy use, compared to 175kWh/m2/yr for conven-
• Average total energy use as built (including thermal and electric tional designs, so the rate of savings is up to a factor of seven. Three
loads) is 266 kWh/m2/yr; buildings have a heating energy use less than 20kWh/m2/yr and eight
have a heating energy use of 20–40kWh/m2/yr, compared to a typical
• Average energy use if complying with the ASHRAE 90.1–2004 stand- heating energy use of 125 kWh/m2/yr.
ard is 157kWh/m2/yr, a savings of 41%; and
In north China, represented by Beijing, typical energy demand of high
• The potential average energy use in new buildings is 92kWh/m2/yr standard office buildings is 60–80kWh/m2/yr for heating and 30–100
with improved electrical lighting, daylight, overhangs for shading, and kWh/m2/yr electricity for air conditioning, lighting, and plug loads. In
elongation of the buildings along an east-west axis, a savings of 65%. south China, represented by Shenzhen, energy demand is 60–120kWh/
m2/yr (all electricity) for all energy uses including office equipment.
With the implementation of technological improvements expected to be Design studies have also shown the feasibility of obtaining 50% savings
available in the future, the gross energy use is so small that PV panels through the use of relatively simple features in office buildings in Beijing
can generate more energy than the buildings use, so that many build- (Zhen et al., 2005) and Malaysia (Roy et al., 2005). The measures in both
ings could serve as a net source of energy. cases involve insulation, shading, advanced windows, energy efficient
lighting, and, in the Beijing case, natural ventilation. But measures such
In the United Kingdom, the energy use guidelines indicate that energy as displacement ventilation, chilled ceiling cooling, and desiccants were
use for office buildings is about 300–330kWh/m2/yr for standard mechan- not considered, so the potential savings are even larger.
ically-ventilated buildings, 173–186kWh/m2/yr with good practice (a sav-
ings of about 40–45%), and 127–145kWh/m2/yr for naturally-ventilated The Energy Base building in Vienna, illustrated in Figure 10.19, is another
buildings with good practice (a savings of 55–60%) (Walker et al., 2007). example of energy use in good practice. The glazing on the south façade
is slightly overhanging to increase the proportion of diffuse to direct
Voss et al. (2007) presented data on the measured energy use in 21 sunlight entering the room, while the incorporation of PV panels and
passively cooled commercial and educational buildings in Germany. The reflective blinds enhances daylighting. In winter, the building combines
passive cooling techniques involve earth-to-air heat exchangers (nine solar preheating of ventilation air with heat recovery in a novel way, as
cases), slab cooling directly connected to the ground via pipes in bore- illustrated in Figure 10.20. Ventilation air flows laterally from the north
holes or connected to the groundwater (nine cases), and some form of side to the south side of the building, then is overheated – to above the
night ventilation (16 cases), along with a limited window-to-wall ratio desired indoor temperature – by the space next to the glazing, which
Figure 10.19 | Photograph of the energy base building in Vienna (left) and schematic diagram of the ventilation, solar-preheating, and heat recovery system (right). Source:
Danny Harvey (photo); Ursula Schneider, Pos Architekton, Vienna.
690
Chapter 10 Energy End-Use: Buildings
10.4.6 Cost of New High Performance and Zero-energy Larger energy savings can cost less than smaller energy savings, as
Buildings indicated by a survey of the incremental cost and energy savings for
32 buildings in the United States by Kats et al. (2003). These buildings
10.4.6.1 Key Messages meet various levels of the Leadership in Energy and Environmental
Design (LEED) standard. Summary results are given in Table 10.9. The
The additional cost of residential buildings in Central Europe that meet energy savings are broken into reductions in gross energy demand and
the Passive House standard has been steadily falling over the past two reductions in net energy demand including on-site generation – by, for
decades, and is now to the point where the additional costs are insignifi- example, PV modules – which tends to be expensive. The cost premium
cant as compared to standard practice in Europe: in the range of 5–8% is the total cost premium required to meet the various LEED standards
of the standard construction costs. In the case of high-performance com- and so includes the cost of non-energy features as well. Nevertheless,
mercial buildings in Europe, North America, and perhaps elsewhere, there average incremental costs are less than 2% of the cost of the reference
is sometimes no additional cost or even cost savings compared to con- building and are smaller on average for buildings with 50% savings in
ventional buildings, because the extra cost of the high-performance enve- net energy use than for buildings with 30% savings.
lope is offset by reduced costs for mechanical and electrical systems.
Measured performance information on ten buildings in the German
SolarBau program where at least one year of data were available by 2003
10.4.6.2 Residential Buildings is given in Wagner et al. (2004). Five of the ten buildings achieved the
100kWh/m2/yr primary energy target, compared to 300–600 kWh/m2/yr
Figure 10.20 shows that in central Europe there is a progressive decline in for conventional designs, but no building used more than 140 kWh/m2/yr
the cost of the additional investment required to meet the Passive House of primary energy. Additional costs are reported to be comparable to the
standard, which uses four to eight times less heating energy than conven- difference in cost between alternative standards for interior finishings.
tional new housing. Through learning, costs have fallen to the point where
the incremental cost can be justified based on 2005 energy prices and The final example presented of the beneficial economics of energy effi-
interest rates. Schnieders and Hermelink (2006) report that the additional cient buildings is one of the first buildings to be built on the new Oregon
691
Energy End-Use: Buildings Chapter 10
Table 10.8 | Comparison of component costs for a building with a conventional VAV mechanical system and conventional (double-glazed, low-e) windows with those for a
building with radiant slab heating and cooling and high-performance (triple-glazed, low-e, argon-filled) windows, assuming a 50% glazing area/wall area ratio.Prices given
in 2001 Canadian dollars.
Table 10.9 | Energy savings relative to ASHRAE 90.1–1999 and cost premium for buildings meeting various levels of the LEED standard in the USA.
Certified 8 18 28 0.66 %
Silver 18 30 30 2.11 %
Gold 6 37 48 1.82 %
Health and Science University, River Campus, and completed in 2006. • the sealing of ductwork alone in houses in the United States saves an
This 16-story building is expected to achieve an energy savings of 60%, average of 15–20% of annual heating and air conditioning energy
with a reduction in total construction costs of US$3.5 million out of an use (Francisco et al., 1998);
original budget of US$145.4 million and an operating cost savings of
US$600,000/yr (Interface Engineering, 2005). • retrofits of 4003 homes in Louisiana, including the switch from nat-
ural gas to a ground source heat pump for space and water heating,
10.4.7 Renovations and Retrofits of Existing Buildings eliminated natural gas use and still decreased electricity use by one-
third (Hughes and Shonder, 1998);
10.4.7.1 Key messages
• an upgrade of multi-unit housing in Germany using, among other
measures, External Insulation and Finishing Systems (EIFSs) achieved
Comprehensive retrofits of existing residential buildings can usually
a factor of eight reduction in heating energy use;
reduce energy requirements, excluding plug loads, by a factor of at least
two, with savings in heating energy requirements, which is the domin-
• an envelope upgrade of an apartment block in Switzerland reduced
ant energy use in cold climates, by up to a factor of ten. There are many
the heating requirement by almost a factor of three (Humm, 2000);
examples of residential buildings, especially multi-unit residential build-
ings, which have been retrofitted to meet the Passive House standard.
• retrofits of houses in the York region of the United Kingdom reduced
Fifty to 70% or more savings in non-plug energy use have been achieved
heating energy use by 35% through air sealing and modest insula-
through retrofits of commercial buildings throughout the world.
tion upgrades, while a 70% savings was projected with more exten-
sive measures (Bell and Lowe, 2000); and
10.4.7.2 Residential Buildings
• a comprehensive retrofit of an old apartment block in Zurich, includ-
Energy use of residential buildings can be reduced through, among other ing the replacement of the roof, achieved an 88% savings in heating
things, upgrading windows, adding internal insulation to walls during energy use measured over a two-year period (Viridén et al., 2003).
renovations, adding external insulation to walls, adding insulation to
roofs at the time that roofs need to be replaced, and through taking There are many examples where old buildings that have been retrofit-
measures to reduce uncontrolled exchange of inside and outside air and ted to very high energy performance standards. Table 10.10 includes
introducing controlled ventilation with heat recovery. Some examples of cases where 90% or more savings in heating energy use have been
modest retrofit measures and the corresponding energy savings are: achieved. A striking example is the retrofit of a ten-story panel
692
Chapter 10 Energy End-Use: Buildings
The SOLANOVA (Solar-supported, integrated eco-efficient renovation of large residential buildings and heat-supply-systems) project
of the European Commission began in January 2003 (see www.solanova.eu). The project goal was to provide best-practice examples of
the renovation of large residential buildings in Eastern Europe which, at present, are being renovated with only minimal improvements
in energy intensity. In 2005, one seven-story panel building in the Hungarian town of Dunaújváros was renovated as part of this project.
Heating energy demand decreased from 220 kWh/m2/yr before the retrofit to a measured demand of 30 kWh/m2/yr over a two-year
period (a reduction of 86%). Overheating in the summer was one of the worst characteristics of the original building, so triple-glazed
windows with an internal Venetian blind were installed on the south- and west-facing walls, resulting in a dramatic reduction in solar
heat gain through the windows. Mechanical ventilation was provided to each individual flat with a real heat recovery of 82%. The
investment cost was 240 €/m2 + VAT. The time to pay back the initial investment, based on energy-cost savings only and at current
energy prices, is 17 years. However, an unattractive and uncomfortable building was turned into an attractive and comfortable building at
the same time. In Eastern Europe, about 100 million people live in large panel buildings, but results demonstrated in Dunaújváros can be
transferred to the large stock of Western European panel buildings as well.
Table 10.10 | Documented examples of deep savings in heating energy use through renovations of buildings.
a
Adjusted to an indoor temperature of 20°
building in the Hungarian town of Dunaújváros, of which hundreds In apartment buildings with balconies, the balcony slabs are a conduit
of thousands of this similar type building exist in Eastern Europe and for heat loss. Glazing the balconies so that they serve to preheat venti-
the former Soviet Union (see Box 10.2). Various studies indicate that lation air, and integrating the balcony with the ventilation system of the
the energy demand in old buildings in western Europe (EU-15) can be apartments, can turn a thermal liability into an asset. Other solar options
reduced by more than 50% with no additional cost over a thirty-year are transpired solar air collectors over vertically extensive equator facing
lifetime, and by up to 85% in new countries of the EU-27 (Petersdorff walls, transparent solar insulation, construction of a second (glass)
et al., 2005a, 2005b). Today’s advanced solutions do not even need façade over the original façade, and installation of conventional solar air
to compromise aesthetics: for instance, several historic and heri- thermal collectors. Savings of 60–70% in old (per-1950) buildings and
tage buildings have also been already retrofitted to passive house 30–40% in new (1970 or later) buildings in Europe have been obtained
standards. these ways (Boonstra et al., 1997; Haller et al., 1997; Voss, 2000).
693
Energy End-Use: Buildings Chapter 10
A number of single-family and multi-unit residential buildings have a standard retrofit and half due to adjustment of the control system
been upgraded to the Passive Standard in Europe. In the case of an old settings to optimal settings (Claridge et al., 2001);
detached house (Haus der Zukunft, 2006) the renovation reduced the
heating energy use from 280kWh/m2/yr to 14.6 kWh/m2/yr at 16% greater • average realized savings of 68% in natural gas use after conver-
cost than a conventional renovation, but the impact of the extra cost on sion of ten schools in the United States from non-condensing boilers
mortgage payments is less than the energy cost savings. In the case of producing low pressure steam to condensing boilers producing low
a 50-unit residential building (Haus der Zukunft, 2007), heating energy temperature hot water, and an average savings of 49% after con-
use was reduced from 179kWh/m2/yr to 13.3kWh/m2/yr at 27% greater version of ten other schools from high to low temperature hot water
renovation cost. and from non-condensing to condensing boilers (Durkin, 2006);
• realized savings of 74% in cooling energy use in a one-story com- In the case of brick or cement façades, one option is to construct a second,
mercial building in Florida through duct sealing, chiller upgrade, and glazed façade over the first to create a double-skin façade, which opens up
fan controls (Withers and Cummings, 1998); opportunities for passive ventilation and reduced cooling loads through
the provision of adjustable external shading devices. This has often been
• realized fan, cooling, and heating energy savings of 59%, 63%, done in Europe. A North American example of the construction of a second
and 90%, respectively, at a university in Texas, roughly half due to façade over the original façade is provided by the TELUS headquarters
694
Chapter 10 Energy End-Use: Buildings
building in Vancouver. In this case, the second façade was constructed as medium-sized enterprises. The WBCSD (2009) suggests that a new “sys-
part of seismic retrofitting. Construction of a second façade can also be tem integrator” profession is needed to develop the workforce capacity
undertaken as a measure to preserve original façades that are deteriorat- to save energy. The United Kingdom is training domestic energy asses-
ing due to moisture problems related to defects in original construction. sors to draw up Energy Performance Certificates (Banks, 2008), while
the Australian government is vigorously supporting the development of
a new profession of in-home energy advisors (Berry, 2009). These efforts
10.4.8 Professional and Behavioral Opportunities and are essential in achieving the technical potential described above.
Challenges
As shown in previous sections, energy use is profoundly affected by 10.4.8.2 Using Buildings and Technologies Differently: A
building design, social norms, and occupant behavior. This section draws Personal Challenge
on socio-technical studies to focus on two dimensions of the relation-
ship between people, energy, and buildings. It describes how organiza- This section addresses how people can reduce energy by using build-
tions and individuals are central to: ings and technologies differently. It considers changing lifestyles, habits,
norms, and practices, and increasing awareness.
• providing energy efficient buildings and technologies;
• using buildings and energy using technologies in appropriate Lifestyles
ways. Substantial reduction, and in some cases even elimination, of energy
use is possible by changing lifestyle through changing energy service
For technical solutions to affect energy use, they must be preceded by demands – for example, through higher building occupancies, the use
human decisions about design, purchase, installation, and use. Reducing of internal temperatures closer to ambient temperatures, lower lighting
the amount of energy used in buildings therefore depends on these fac- levels, and the natural drying of clothes. In some cases, the change can
tors to varying degrees. be considered a loss of energy service (or utility), rather than provid-
ing the same service more efficiently. But levels of energy service that
The broader relationship between energy service demands and socio- are considered normal, or even desirable, are a function of culture and
economic factors, particularly in developing countries, is discussed in lifestyle. Varying lifestyles require varying levels of energy service, both
Chapter 21. This section focuses more closely on the opportunities and in different societies (Wilhite et al., 1996) and within the same soci-
challenges of reducing energy used to create comfort, visibility, cleanli- ety (Lutzenhiser, 1993). The variation is not only dependent on cost and
ness, and convenience in buildings. income, but also on cultural practices.
Delivering a global transformation to a low energy building stock raises The threat of climate change adds a new motivation for lifestyle change
a number of social challenges, including in the professions responsible and has already generated a large number of new information sources,
for the built environment, wider society, and individual building owners especially carbon footprinting web tools (Bottrill, 2007). Available evi-
and users. A major effort to train the construction sector workforce will dence finds this has yet to have a major effect on most consumers
be needed in all countries. Lifestyle and management practices consist- (Lorenzioni et al., 2007), although there is some evidence of it providing
ent with low energy buildings will need to be encouraged. Programs will a catalyst for community-based activity (Burgess, 2003; Darby, 2006a).
be required to deliver appropriate education, information, and advice to However, as the thermal performance of buildings improves due to tech-
building designers, constructors, and users. Better feedback to users via nical measures, the scope increases for occupant behavior to lead to ‘in
smart meters has an important role to play, but alone it is insufficient. use’ performance deviating (in percentage terms) from ‘as designed’.
695
Energy End-Use: Buildings Chapter 10
20% of household direct emissions or 7.4% of US national emissions, trees) to prevent unnecessary heat gains; reducing unnecessary air
with little or no reduction in household well-being. Similar absolute change (e.g., open windows) when heating or cooling; using showers
reductions are not possible in developing countries where energy ser- rather than baths; using low water temperatures for clothes washing;
vice demand will grow. However, the rate of growth of energy demand naturally drying clothes; not overfilling pans and kettles; switching off
in buildings can be reduced by lower demand lifestyles (Wei et al., lights in unoccupied space; using off, or other low power down states,
2007). Although lifestyles vary across any society, lifestyle change is for unused electronics. Box 10.3 gives two examples in residential and
strongly affected by social interactions (Jackson, 2009) and therefore commercial buildings that further highlight social and cultural dimen-
may be affected by policy. Chapter 21 contains a further discussion of sions of energy use.
this topic.
As shown in Section 10.1.3, conditioning living space to an accept-
Changing Habits, Practices, and Norms able temperature and humidity is generally the largest use of energy.
Even without major lifestyle changes, it is possible in high con- Adaptation to higher/lower internal temperatures is therefore the most
sumption societies for energy demand to be reduced through minor important single behavioral issue. Thermal comfort is subjective, vari-
changes in behavior and conscious control of energy use. The reduc- able, and to some extent influenced by previous experience. Recent
tion or elimination of wasteful behaviors generally requires increased studies have shown that people in different countries consider them-
awareness. selves comfortable at very different temperatures; that they will accept
higher temperatures in naturally ventilated buildings than in mechan-
Behavioral changes that might take place include allowing higher/ ically-cooled buildings; and that indoor seasonal and diurnal tempera-
lower internal temperatures within acceptable comfort levels; the bet- ture fluctuations may not be a bad thing. Box 10.4 discusses the concept
ter use of shutters, blinds, or other artificial or natural shading (e.g., of adaptive comfort in further detail.
The importance of culture in determining buildings energy use is well demonstrated by the case of Japan. Japan is one of the most
affluent countries in the world, but per capita space heating thermal energy demand per degree-day (heating degree day, or HDD) is
significantly lower than in most other developed countries – about 8 GJ/capita compared to an OECD average of ~20 GJ/capita at 2700
HDD (IEA, 2007b). Japanese demand for space-heating is approximately one-third of that of other developed countries.
Beyond the typically much lower per capita floor area (29 m2 per person compared to the OECD average of 46 m2 per person (IEA,
2007b)), the reason is that most Japanese homes do not heat the entire living space, but use a modification of a traditional method
to provide thermal comfort. In traditional Japanese homes, fire pits or charcoal braziers were generally used to warm the body. The
“kotatsu,” a direct body-warming apparatus unique to Japan, was common in Japanese houses. A kotatsu is a low table covered
with a futon (a heavy quilted cover) placed on a tatami (floor mat). The inside of the futon is warmed by an electric heater attached
to the bottom surface of the table. People sitting on the tatami put their feet under the table for direct body warmth. People can live
comfortably in a room using a kotatsu even if the room air temperature is low; in many cases, rooms equipped with a kotatsu are
heated only to a low temperature, or no heating is used at all. According to a detailed survey of residential energy use, the annual
energy use of a house that uses a kotatsu as the main heating apparatus is approximately 40% less than the average use of all the
houses studied (Sugihara et al., 2003). Over recent years, Japanese residences have been changing from a low-energy direct body-
warming system such as kotatsu to a space heating system. This is one reason why energy use in the Japanese residential sector has
been increasing.
Another example of a non-technological measure to reduce energy use is the Japanese “Cool Biz” program. Recognizing the fact that
thermal comfort is highly dependent on clothing, which in turn is often determined by culture and dress codes, Japan attempted to
change its existing dress code culture to a more sustainable one. In 2005, the Japanese Ministry of the Environment (MOE) promoted
office building air conditioning settings of 28ºC during summer. As a part of this campaign, MOE has been promoting a new standard for
summer dress codes, “Cool Biz,” to encourage business people to wear cool and comfortable clothes to work in summer rather than the
traditional multi-layered, heavy and dark standard attire that often results in air conditioners having to be set to low temperatures. MOE
estimated that CO2 emissions had been reduced by approximately 460 thousand tonnes as a result of the campaign. MOE will continue
to promote Cool Biz and higher summer temperatures in offices (MOE, 2006).
696
Chapter 10 Energy End-Use: Buildings
Warmer interior temperatures are acceptable on hot days and colder interior temperatures are acceptable on cold days, if an individual
knows what to expect and is accustomed to it. In fact, surveys have shown that individuals typically find acceptable indoor temperatures
to be several degrees lower in the heating season than in the cooling season (de Dear and Brager, 1998). The psychological adaptation
to warmer/cooler temperatures is enhanced if an individual can control his or her environment by being able, for example, to open or
close windows, or to activate or deactivate a fan. Research in Denmark indicates that a temperature of 28°C with personal control over
air speed is overwhelmingly preferred to a temperature of 26°C with a fixed air speed of 0.2 m/s (de Dear and Brager, 2002). In Thailand,
Busch (1992) found that the maximum temperature accepted by 80% of survey respondents is about 28°C in air conditioned offices and
31°C in naturally ventilated offices. Despite this evidence, most air conditioned buildings are operated to maintain a temperature in the
lower part of the 23–26°C range, irrespective of outdoor conditions.
Although the percentage savings from increasing the thermostat setting for air conditioning diminish the warmer the outdoor
temperature, the implications are substantial. Increasing the thermostat from 24°C to 28°C in summer will reduce annual cooling energy
use by more than a factor of three for a typical office building in Zurich and by more than a factor of two in Rome (Jaboyedoff, Roulet et
al., 2004), and by a factor of 2–3 if the thermostat setting is increased from 23°C to 27°C for night-time air conditioning of bedrooms in
apartments in Hong Kong (Lin and Deng, 2004).
Increasing Awareness in real time within the building, e.g., via TV screens or internet (Wood
Many countries and regions now have energy efficiency agencies that pro- and Newborough, 2003; Darby, 2008).
mote “easy” behavioral actions (e.g., ADEME, 2009; Efficiency Vermont,
2009; EST, 2009). There are a number of approaches that are designed to The costs of smart metering are expected to fall and the functionality
assist energy users voluntarily to change their own energy using behav- to improve. Future technology will potentially use electrical harmon-
ior by increasing their awareness of energy issues. The types of measures ics, load profile data, and learn to identify, and feedback individual
that fall within this category are: feedback, education, information, and appliance consumption from aggregate meter data. A driver for smart
advice. metering is the need for smart grids to deal with the greater use of
intermittent generation in low carbon electricity systems (see Chapter
a. Feedback – Billing and Metering 11). These require electricity retailers and their customers to consider
Feedback is the provision of information about personal energy use. This rescheduling of loads when possible, i.e., load switching or demand
may be retrospectively with fuel bills, or in real time through metering and response measures(Hartway et al., 1999; Vojdani, 2008).This could be
display technology. Reviews by Darby (2006a, 2006b) found that bills and via building users responding to time-dependent price signals or by
other forms of indirect feedback can produce savings of 0–10%; savings electricity supplier control over loads that are not time critical, e.g.,
from metering and direct feedback are typically in the range of 5–15%.The cold appliances. In either case, smart meters potentially facilitate
persistence of the effect is not well established. The use of smart metering greater involvement of buildings in balancing electricity systems.
for building energy management is growing. There is no agreed definition
of smart metering. In some cases, programs of automated meter reading To effectively influence user behavior – whether to reduce demand or
(AMR), i.e., remote meter reading, have been described in this way (Morch encourage load switching – information will need to be relevant and easy
et al., 2007). These are already used extensively in some places, e.g., Italy, to assess. While the principle is clear, the exact format of the information
Sweden, and the Canadian province of Ontario (IBM, 2007; Haney et al, that will be most effective is less obvious. Metrics could include energy,
2008) and provide clear benefits for energy suppliers through more timely cost, or carbon and representations could be numeric or graphical, and
and accurate information (Morch et al., 2007). Energy efficiency benefits could be based on comparisons with past use or other users. Different
within buildings are likely to be limited to those resulting from users mak- forms and levels of information will be required for professional users and
ing better decisions based on more accurate and frequent bills and incen- householders, and may need to reflect other user differences, including cul-
tives like dynamic pricing structure. ture and building type. More detailed research on the interaction between
technology and behavior is required to maximize potential benefits.
Greater involvement of building occupants demands two-way informa-
tion flows. This is described as automatic meter management (AMM) b. Education
or advanced metering infrastructure (AMI) (NETL, 2008). Information Education is mainly targeted at young people. The objective is to provide
may be transferred through a range of communication channels, e.g., the knowledge and skills about energy use that will allow them to make
power lines, mobile phone text message, or radio, with results provided informed choices as energy users. Energy and environment form part of
697
Energy End-Use: Buildings Chapter 10
the curriculum in many countries, but not in all countries and not yet at 10.5.2 Introduction
adequate levels. A recent review of environmental programs around the
world found that, although environmental education is growing, energy The previous sections demonstrated that there is a broad spectrum
and energy efficiency are under-represented in national and international of opportunities in buildings to significantly reduce energy demand
environmental educational programs (Harrigan and Curley, 2010). There is without compromising the energy service delivered. This chapter
some evidence that education can be effective in the short term in influen- attests that many opportunities offer net private or societal benefits.
cing child and parent behavior (Heijne, 2003), but the lack of longitudinal Subsidized energy prices (Kosmo, 1989; Lin and Jiang, 2010) and spe-
studies makes firm conclusions about long-term impacts difficult. cific characteristics of the buildings sector – their occupants; agents
who relate to construction, operation, maintenance, and use of build-
c. Information ings; and market characteristics – limit the “perfect” and “rational”
Information is the provision of material on energy saving opportun- energy efficiency function of buildings (de T’Serclaes, 2007). The IPCC
ities via government campaigns, the media, and other means, including (2007) concluded that the barriers that prevent many cost-effective
energy company billing. Information may be combined with motiv- energy efficiency and building-integrated distributed generation invest-
ational content design to change behavior, generally focusing on either ments from being captured by market forces in present economic and
cost savings or environmental benefits. There is some evidence that political environments are especially strong in the built environment.
information from public and not-for-profit sources is more trusted and Recent research identifies possible approaches to increase uptake of
effective than from energy companies (DEFRA, 2005). many of these opportunities (Brown et al., 2008; Brown et al., 2009;
US DOE, 2010).
d. Advice
Advice differs from generally available information, as it targets the This section reviews barriers and solutions based on literature pub-
needs of the individual based on personal circumstances. There are lished since previous assessments, such as the IPCC (2007) and the
a number of variants including face-to-face, telephone, and, more World Energy Assessment (WEA) (2000; 2004). While the literature
recently, internet-based advice systems. There is experience of this for has been extensive in accounting for and explaining these imperfec-
energy use in businesses and households (Darby, 2003). Cost effective- tions, recent demands have become stronger for the quantification of
ness of advice-oriented programs is generally very good. In one case, these barriers to better inform private and public decision making. For
cost savings for consumers were 40 times the cost of the program instance, expenditure-based, climate change target setting, quantifi-
(DEFRA, 2006b). Face-to-face advice is the most effective but least cost cation of GHG reduction potentials at various cost levels, as well as
effective (Sadler, 2002). Much of the benefit resulting from advice lead- several other policy goals require an understanding of the quantified
ing to technical change persists longer than simple behavioral change. importance of these barriers, the monetized impact of some of them,
and an assessment of how much of these indirect costs can be pre-
vented by policies. This section also aims to summarize quantitative
10.5 Barriers Toward Improved Energy estimates of these barriers so that their impacts can be incorporated
Efficiency and Distributed Generation in into estimates of energy saving potential, in addition to incorporating
Buildings co-benefits of energy efficiency (see Section 10.7). Different barriers
are grouped according to typology as presented by the IPCC (2007) and
10.5.1 Key Messages summarized in Table 10.11.
698
Chapter 10 Energy End-Use: Buildings
Table 10.11 | Taxonomy of barriers that hinder the penetration of energy efficient technologies/practices in the buildings sector.
Financial costs/benefits Ratio of investment cost to value of energy savings Higher up-front costs for more efficient equipment
Lack of access to financing
Energy subsidies
Lack of internalization of environmental, health, and other external costs
Hidden costs/benefits Cost or risks (real or perceived) that are not captured directly in Costs and risks due to potential incompatibilities, performance risks,
financial flows transaction costs etc.
Market failures Market structures and constraints that prevent the consistent Limitations of the typical building design process
trade-off between specific energy-efficient investment and the Fragmented market structure
energy saving benefits Landlord/tenant split and misplaced incentives
Administrative and regulatory barriers (e.g. in the incorporation of
distributed generation technologies)
Imperfect information
Behavioral and organizational non- Behavioral characteristics of individuals and organizational Tendency to ignore small opportunities for energy conservation
optimalities characteristics of companies that hinder energy efficiency Organizational failures (e.g. internal split incentives)
technologies and practices Non-payment and electricity theft
Tradition, behavior, lack of awareness, and lifestyle
Corruption
Lack of enforcement/implementation/monitoring
lack of or limited access to financing, cost of capital, and energy subsid- 10.5.4 Market Failures
ies that do not allow for estimating the real energy cost savings (IPCC,
2007; de T’Serclaes, 2007). In traditional economic analysis, market failures refer to flaws in the
ways that markets operate in practice compared to theoretically per-
Table 10.12 illustrates that transaction costs, high discount rates, and fect markets. They are violations of one or more of the neoclassical
lack of real-time pricing are studied to the largest extent in the financial economic assumptions that define an ideal market, such as rational
group of barriers. Based on the information available, the financial bar- behavior, costless transactions, and perfect information (Brown, 2001;
riers are concluded to be very strong. For example, the transaction costs Jaffe and Stavins, 1994). These failures are caused by misplaced incen-
of energy efficiency and renewable energy projects in the buildings sec- tives; administrative and regulatory barriers; imperfect information;
tor reach as high as 20% of investment costs. unpriced environmental, health, social, and other external costs and
benefits; fragmented market structure; and limitations of the typical
Higher investment costs of efficiency technologies require significant building design and construction process. Decisions that result in the
investment in research as well as government programs to push market energy performance of buildings are fragmented, being made by build-
development further and faster. Since energy codes are relatively new in ing owners, architects, craftsmen, and occupants. Their motivations and
several developing nations, green products and services including insu- opportunities for efficiency differ. Recently, social science gained new
lation, CFLs and T5 lamps, efficient glass, and efficient HVAC systems – insights concerning positive drivers for efficiency and renewables – e.g.,
required by buildings to comply with some code requirements – are not social prestige using the image of being socially responsible or “green,”
readily and abundantly available or competitively priced. education, and social networking.
Consolidation of the majority of global production in a handful of multi- As Table 10.12 shows, the impacts of market failures are rarely meas-
national manufacturers for each product type creates an opportunity for ured, with the exception of misplaced incentives which have been cov-
a well-designed set of policies, including voluntary labels, mandatory ered recently by a few publications. Meier and Eide (2007) estimated that
performance regulations, and financial incentives, to rapidly increase the up to 100% of energy services and up to 80% of primary energy use of
production of energy efficient products. The energy efficiency standards buildings are affected by misplaced incentives. If the barrier is removed,
and the Energy Star program for some products provide examples where the energy savings, for instance for space and water heating, may reach
most production has shifted toward higher efficiency, having several 50–75%. The impact of administrative and regulatory barriers is difficult
sequential updates for some products. Updating those policies and con- to measure, but researchers attest that there are a number of distort-
tinued R&D are necessary to maintain the long-term trend in decreasing ing policies against installing distributed generation (see, e.g., Brown,
energy use and costs per product to support sustainable development 2001). Methodologies exist for monetizing externalities, but final con-
in the building sector. For building retrofits, accessible mechanisms for sumers have little information or incentive to undertake the level of effort
providing information and capital are needed. required to include external costs and benefits in their decisions.
699
Table 10.12 | Selected barriers to GHG mitigation in the buildings sector and methodologies for their quantification in the literature.
700
Methodologies used for
Barriers Case study Quantified impact of the barriers References
quantification
Market fragmentation US Empirical study US: Uncaptured social returns from R&D are ≥ CEA, 1995
50% than estimated private returns because of the
fragmentation within the sector
Uncertainty in future prices US Economic model of irreversible USA: Investment in energy efficiency under Hassett and Metcalf, 1993
investment uncertainty falls from 25%/yr. to ~ 1%/yr. and is
less than 5% after 20 years
Misplaced incentives (principal US, Norway (NO), NL, AU, JP Survey NO: the problem in the commercial offices affects Meier and Eide, 2007;Ecofys, 2001;OECD/
agent problem) Authors’ estimation around 80% of the energy use; energy use is ca 50 IEA, 2007
Top-down analysis kWh/m2 higher in leased office space; the potential
Case study energy savings are 3.24 to 5.4 PJ/yr., or 15% of
the total energy use in the Norwegian commercial
sector
US: savings from 2003 sales of water heaters would
amount to 9.6 PJ/yr. of final energy and 12.6 PJ/
yr. (about 7%) of primary energyuseif PA problems
were solved
NL: after removing the barrier, ca 20% of houses
can be additionally insulated with an energy saving
of 50%-75%/house for space heating (2–4 PJ/yr.)
NL: The energy use affected by problems is more
than 24.5 PJ per year, which accounts for over 40%
of total energy use in commercial offices
JP: energy use in commercial offices affected by
the problem is 0–1.5% of total national electricity
consumption
a
The ratio, expressed as a percentage, which results when a borrower’s monthly payment obligation on long-term debts is divided by his or her net income or gross monthly income (Business Dictionary Online, 2008)
b
Difference: more myopic consumers are more reluctant to buy EE goods (this is true for both high- and low-efficient durables). On the other hand, consumers are more myopic in case of low-efficiency durables.
701
Energy End-Use: Buildings Chapter 10
In developing countries located in tropical regions, most of the residential buildings and several commercial building types are still
designed as unconditioned spaces. Thus, the construction methods do not address issues of proper weather stripping, infiltration control
or use of appropriate building materials, such as insulation or doubling glazing. However, changing climate and lifestyles have triggered
retrofit of such buildings with window/packaged air conditioners. This leads to inefficient energy use.
Designing efficient buildings typically leads to a reduction in cooling loads and lighting loads and thus reduced sizes for installed system,
with an imminent reduction of capital expenditure on systems. Typically a consultant’s remuneration is a percentage of the capital cost,
and thus a consultant may not be positively inclined to reduce the capital cost of a project, if there is no provision for added incentive for
doing so. Designers and contractors are often slow to adopt energy efficient designs due to inertia or lack of training.
10.5.5 Behavioral and Organizational Non-optimalities production in the construction process. Gallaher et al. (2004) estimated
that the costs caused by ineffective communication between different
There are different behavioral and cognitive characteristics of individ- stakeholders in the US building industry, including architects, engineers,
uals and organizational characteristics of companies that hinder energy general constructors, suppliers, owners, etc., is about US$15.8 billion.
efficiency technologies and practices in buildings. Perhaps the strong- Improvement of building professionals’ communication skills and ability
est barrier in this category is a major lack of technical, economic, and to use modern software and electronic systems for the exchange of infor-
general knowledge related to low-energy buildings (see Box 10.5). This mation can reduce such costs. In addition to the education of architects
knowledge gap exists not only among building designers and architects, and effective communication of opportunities to consumers, an adequate
but also among politicians, investors, tenants, and consumers. trained workforce is needed to install and maintain efficient buildings
and equipment. The training of a modest workforce (about 24,000 jobs)
Beginning with the design side, there is a lack of knowledge among to commission non-residential buildings is expected to yield significant
designers of how to best incorporate efficiency practices into building benefits, including US$30 billion in energy savings by year 2030 and
design to meet or exceed building code requirements. This is due to the annual greenhouse gas emissions reductions of about 340 megatonnes
novelty of energy efficiency concepts in buildings, especially in develop- of carbon dioxide (Mills, 2009). Studies of energy service companies in
ing countries until recently. Furthermore, the capability of designers and the United States estimate the 2008 workforce to be about 120,000 per-
architects to perform energy simulations to quantify the potential sav- son/yr equivalents (PYE), or equivalent to about 400,000 employees, and
ings from energy efficiency is also very limited in developing countries. it is expected to grow by a factor of two to four by 2020, if they can over-
come a number of key challenges (Goldman et al., 2010).
Even once some efficient buildings have been designed effectively, the
building construction industry is not generally prepared to apply these For designers and architects to shift their design and building practices,
measures practically on site and remains largely unaware of the environ- there needs to be a demand for efficient buildings from investors, devel-
mental impacts of its operations. Actual energy performance is generally opers, owners, and building occupants. This demand is currently low in
not reported back to designers, builders, or contractors and they are not developing countries due to several factors. There is a lack of know-
held accountable for inefficient designs or poor construction practices. ledge about green investments and returns on efficient buildings. The
value of energy efficient designs are underestimated by appraisers and
There are very few university programs in architecture and engineer- reduced energy bills are not generally considered by mortgage lenders.
ing in which curricula include energy efficiency issues in buildings. A Most consumers are also unaware of the comparative costs of the future
report in the United States on workforce education and training iden- operation and maintenance of buildings, and therefore they do not take
tified 43 (of 492) higher education and/or training programs that meet building efficiency into consideration when making purchasing deci-
minimum criteria of a specific emphasis on energy efficiency (Goldman sions. Because of this, most builders do not consider the future costs of
et al., 2009). Due to the fact that courses on energy efficiency topics operating the building during design and construction. Finally, there is a
are not always compulsory, the number of graduates who have studied lack of awareness of the financial, environmental, and health benefits of
these subjects is even lower. operating buildings efficiently.
Insufficient education for building professionals causes the problem of Also, many consumers are still unaware of the availability of green prod-
ineffective communication with specialists in related fields and lower ucts and energy efficiency labeled products. With attention primarily on
702
Chapter 10 Energy End-Use: Buildings
purchase costs and without adequate consideration of the lifecycle costs energy efficiency. In such cases, renewable energy projects and rural
and benefits of efficient products, the perception of higher upfront cost electrification often play a more important role for governments than
limits purchases of efficient products. An owner who wants to improve energy efficiency. A scenario for implementing cost-effective efficiency
his or her house may find it difficult or impossible to get a proper offer for electricity in India, primarily through end-use technologies in build-
from a construction firm on how to refurbish a building with a focus on ings, is expected to reduce government payments of energy subsid-
the whole house and its energy efficiency. ies, to involve lower capital costs than the costs of new supply, to
eliminate the chronic electricity supply shortage in a few years’ time,
Decisions about installing original or replacement appliances, lighting, and to improve the national economy by increasing the availability
and equipment (e.g., heating and cooling, water heating) in buildings of electricity for commercial and industrial enterprises (Sathaye and
face similar barriers. The situation is improved by the existence of energy Gupta, 2010).
labels, and more so by minimum energy performance standards and
building codes that mandate cost-effective efficiency levels. The increased influence of western architecture, such as glass-domi-
nant structures for commercial use, is very common in India. Being in
primarily a cooling-dominant climate, this often leads to large cooling
10.5.6 Barriers Related to Energy Efficiency Options in loads and hence increased energy demand. Also in developing coun-
Buildings in Developing Countries tries, the regulatory frameworks for the implementation of energy effi-
ciency in buildings are often inadequate. In India, for example, while
Table 10.12 presents an assessment of impacts of different groups of there are regulations – such as environmental clearance of large con-
barriers on the scope or the costs of energy conservation potential. struction projects by the state or central environment departments
Analysis of Table 10.12 finds that the research has extensively covered or ministries – implementation and monitoring mechanisms are
only a few barriers, namely transaction costs, lack of real-time pricing, inadequate.
and the principal-agent problem, and only in developed countries. Table
10.12 also illustrates that studies use different indicators to measure Lack of knowledge among architects and system providers to incorp-
the impacts of different barriers, making it difficult to compare these orate energy efficiency is another major barrier. Energy efficiency in
impacts or to estimate the overall aggregated effect of the barriers on buildings is not taught as a part of the curriculum in most schools of
energy conservation potential in the built environment and its costs and architecture. Another key barrier is inadequate availability of products
benefits. Therefore, unification of the methods is important to have a and services related to energy efficient buildings, which often leads to a
comprehensive analysis. This section attempts to look at the barriers monopoly of a few providers and thus higher costs. The absence of suit-
through a regional lens. able financial products, such as low interest loans for energy efficient
buildings and robust energy performance contract mechanisms to off-
Major barriers to energy efficiency improvements in the building sector set and/or build confidence in incremental costs, is a major barrier that
in developing countries include lack of awareness of the importance of, hinders the penetration of energy efficiency in buildings.
and the potential for, energy efficiency improvements, lack of financing,
lack of qualified personnel, and insufficient energy service levels (Ürge-
Vorsatz and Koeppel, 2007). Also, negative experiences with energy effi- 10.6 Pathways for the Transition: Scenario
cient equipment such as in the case of some low cost CFLs that fail Analyses on the Role Of Buildings in a
prematurely, can pose barriers. The biggest building market – single- Sustainable Energy Transition
family homes – is often unorganized and outside the control of local
authorities. When homes are part of the informal sector, building codes 10.6.1 Key Messages
or standards are not applied. In Brazil, for example, 75% of the residen-
tial sector falls under the informal category. This section presents scenarios for future regional and global energy use
in the buildings sector that meet the multiple objectives outlined in the
Subsidized energy prices are another strong barrier in many devel- GEA. The energy demand scenarios developed here served as input to
oping countries. However, these subsidies enable access to minimal and have been harmonized with the main assumptions in the GEA tran-
energy service levels for certain population groups, which means that sition pathways presented in Chapter 17. The scenarios demonstrate that
removing subsidies may be socially difficult and undesirable. In these reducing approximately 46% of final thermal energy use in buildings is
cases energy efficiency programs may be especially important because possible by 2050, as compared to 2005. This is achievable through the
improved efficiency can either reduce the need for public subsidies proliferation of existing best practices in building design, construction,
or enable elevated service levels and the more effective use of sub- and operation, as well as accelerated state-of-the-art retrofits. This is
sidies. In countries or regions with a lack of access to reliable energy attainable in concert with increases in thermal comfort, the elimination
supply, such as parts of Africa, the priority of governments may be of energy poverty, economic development, and living space increases
to improve access to energy for inhabitants rather than to improve in some regions. Realization of this potential requires undiscounted
703
Energy End-Use: Buildings Chapter 10
cumulative investments of approximately US$14.2 trillion (or US$18.6 The following subsections describe the models of thermal energy use
trillion without technology learning) by 2050. At the same time, these and electric plug loads and their results. The driving questions were:
costs will be substantially recovered by the approximately US$58 trillion
in undiscounted energy cost savings during the same period. However, • How large of a role can buildings play in an energy transition for
scenarios also show a great risk of lock-in effect – about 80% of thermal sustainability?
energy savings can be locked in the global building sector if suboptimal
solutions continue to be pursued. • How far can buildings take us in mitigating climate change and
addressing other energy-related challenges outlined in this report?
New appliances, IT, and other electricity using equipment also have sig-
nificant potential for energy use reduction – up to 65% by 2020 in rela- The scenarios presented here analyze pathways in which energy effi-
tion to the baseline – due to the worldwide utilization of present and ciency in buildings is pushed toward the state-of-the-art, but do not
foreseen cutting-edge technologies. extend to assessing building-integrated sustainable energy generation
options such as renewables, or to assessing the role of lifestyle/behav-
ioral changes, due to time and other constraints.
10.6.2 Description of the GEA Building Thermal Energy
Use Model They represent feasible deployment potentials (i.e., techno-economic
potentials that also consider deployment constraints), assuming a very
Providing thermal comfort in buildings contributes significantly to glo- strong supporting policy framework globally. It is important to note,
bal energy use, yet this energy end-use sector is also the most poorly however, that the building scenarios share the fundamental philosophy
understood one. Little data and detailed information exist related to the of the GEA in that they presume the increase in the thermal energy ser-
heating and cooling of our buildings. Consequently, few global models vice to satisfactory levels to all populations worldwide, i.e., they assume
exist. The model in this report is a newly constructed one prepared for that fuel poverty is eliminated and sufficient thermally conditioned min-
the GEA pathway analysis, but is built on earlier results as well as pre- imal living space is provided for all by the end of the modeling period.
sent state-of-the-art work in progress, using a novel approach. Originating from the nature of these end-uses, the timeframe for these
projections is different. In contrast to other GEA pathways, the building
The energy demand scenarios developed here served as input to and scenarios only extend until 2050 since, due to the shorter lifetime and
have been harmonized with the main assumptions in the GEA transition high changeability of the equipment covered, any projections beyond
pathways presented in Chapter 17. the midterm become extremely speculative and thus lack robustness.
The building thermal energy use model constructed for the GEA is
novel in its method, as compared to earlier global world energy ana- 10.6.2.1 Model Design and Novelty
lyses. It reflects a new emerging paradigm that builds on an emerging
approach to building energy transformation: one that takes advan- Prior models of building energy use or mitigation opportunities have
tage of the fact that buildings are complex systems rather than sums focused on individual building components or the equipment used for
of components. This holistic approach is based on a performance-ori- heating and cooling, or other end-uses and alternatives to these that
ented concept of building energy use, as opposed to a component- can save energy. One example of a model mastering this approach is the
oriented approach. It also focuses on providing energy services rather Bottom Up Energy Analysis System (BUENAS) of the Lawrence Berkeley
than energy per se. Applying this approach to building energy saving National Laboratory, focusing on appliance efficiency. The model
potential assessment typically results in much higher energy saving projects increases in appliance – space heating and cooling systems
potentials than earlier approaches, which do not integrate systemic included efficiency on total final energy use. This model was used for the
opportunities or opportunities emerging through focusing on the pro- plug load part of the GEA pathways. (The BUENAS model is described in
vision of energy services. However, this approach is consistent with more detail in Section 10.6.3.)
the empirically observed opportunities presented earlier in this report
for various technologies and know-how, based on the savings that A new thinking has been emerging recently in building energy science
are possible by treating buildings as systems rather than as sums of and analysis that represents a shift of paradigm – a system-based, per-
separate components. Electricity use by appliances (except cooling formance-based, holistic approach. This replaces the component-based,
appliances) and other plug loads is treated separately and does not piecemeal approaches of earlier efforts. The new approach recognizes
require the consideration of system level savings opportunities. These that buildings are more complex systems than just the sum of their
energy uses (in contrast to cooling), are more complex from modeling components, and that there are many synergistic opportunities and
purposes and do require the consideration of system level opportun- trade-offs, too. It also recognizes that the same levels of energy per-
ities; thus, they have been modeled using conventional approaches in formance can be obtained through different pathways – i.e., different
a separate module. packages of energy-efficiency measures, which gives optimal freedom
704
Chapter 10 Energy End-Use: Buildings
for the constructors and designer to reduce energy use in a particular efficiencies of individual devices than on state-of-the-art design, con-
set of circumstances (Laustsen, 2008).23 This new thinking is reflected in struction, and operation know-how and technology packages, as well
performance-based building energy regulations – i.e., that specify build- as main climate types. The total energy requirement for thermal loads is
ing codes based on energy use per square meter useful space, or other derived as the product of energy intensity and floor area, summed over
similar complex systemic performance indicators, rather than those all building types, vintages, regions, and climate zones. Thus, key model
regulating individual building components. inputs include floor space developments and specific energy demand
values for existing and replicable, economically feasible, exemplary
Following this paradigm change, a number of countries and jurisdictions buildings in each region and each climate zone.
have been revising their building energy codes based on new perform-
ance-based approaches (Hui, 2002). These include building regulations The logic of the model leaves it to the creativity of the architect and
in the United States, Canada, the European Union and its member energy engineers to decide how – through which technologies or design
states (i.e., the Energy Performance of Buildings Directive (EPBD)), and and operational measures – the state-of-the-art performance level is
Singapore (Hui, 2002). exactly achieved. It assumes that once the selected type of exemplary
buildings have demonstrated the feasibility of a certain ambitious level
At the same time, building energy and climate scenario modeling of energy performance and the promise of economic viability in the
related to buildings has not yet reflected this paradigm change. The respective climate and building type, such levels are broadly attainable
GEA building pathway assessment is among the first models using the in that particular climate zone, building type, and vintage. The model
performance-based approach, and has been developed in close cooper- then presumes that such state-of-the-art construction and renovation
ation with the few other ongoing efforts using a similar logic for global becomes the standard, e.g., through strictly enforced building codes.
building energy modeling (Harvey, 2010; Laustsen, forthcoming).
Each time a new building is constructed or reaches its retrofit cycle, it is
Another novel aspect of the present model is in that it focuses on pro- assumed to reach state-of-the-art specific energy demand levels for its
viding energy services rather than energy per se. This is reflected in the category and climate type, after a certain transition period. The transi-
fact that the model’s end goal is to provide adequate thermal com- tion period is allowed so that markets and industries have ramp-up time
fort for living and commercial floor spaces needed by the population, for large-scale deployment of exemplary building construction technolo-
and first examines options how this can be provided with the least gies, materials, and know-how, as well as allowing time for the needed
energy input. As a result, architectural and engineering solutions that ambitious enabling policies to be enacted and the necessary support-
maximize the thermal performance of buildings are emphasized, often ing institutional framework to be introduced. The model assumes ten
significantly reducing, and sometimes eliminating, the heating and/ years for this transition period, which is shown by recent literature
or cooling load that needs to be met by energy input, even before a likely to be a very conservative assumption (Ürge-Vorsatz et al., 2010;
technological solution needs to be applied. Therefore, a focus on energy in preparation).
services rather than energy allows for many non-energy solutions or a
larger portfolio of innovative options to reducing energy use, and thus Separate final energy intensity levels are specified for different building
unlocks much larger mitigation options and energy saving potential. types (single family (detached or attached), multifamily (four or more
levels, terraced, etc.), and commercial and public buildings) in four differ-
ent climate zones (warm moderate, cold moderate, tropical, and arid) in
10.6.2.2 Modeling Logic, Structure, and Main Assumptions each of 11 GEA regions (North America (NAM), Western Europe (WEU),
Pacific OECD (PAO), Eastern Europe (EEU), Former Soviet Union (FSU),
As described earlier, the GEA model is grounded in a performance- Centrally Planned Asia (CPA), South Asia (SAS), Other Pacific Asia (PAS),
based logic that considers buildings as entire complex systems and Middle East and North Africa (MEA),Latin America and the Caribbean
not the sum of their components. Specifically, buildings energy use is (LAC), and sub-Saharan Africa (AFR)).
not modeled based on individual energy efficiency measures, but are
computed based on marker exemplary buildings with measured, docu- The specified energy intensity levels for advanced new buildings and
mented energy performance levels and associated investment costs. A retrofits are based on demonstrated energy and financial performance
fundamental thesis of the model is that building energy performance results in each region, but energy values are adjusted upward to allow
depends less on precise degree days (cooling and heating) and technical for difficulties in achieving the best-observed performance in all cases.
23 Note that with greater flexibility for designers, the performance-based standards The model distinguishes three different categories of buildings: all three
require using computer-based models and a deeper understanding of the building categories of buildings exist in all eleven GEA regions of the world and
principles (Laustsen, 2008). However, there are developments in this area as well, and
European Committee for Standardization (CEN) and the International Organization are then split by four climate types (for regions, climates, and the floor
for Standardization (ISO) are developing international standards founded on per- area model see the sections below). The model uses business-as-usual
formance-based approaches (Laustsen, 2008). construction and demolition rates. However, as became clear in the first
705
Energy End-Use: Buildings Chapter 10
modeling runs, retrofit dynamics fundamentally determine the attain- highly efficient buildings are being built in relatively large numbers, but
ability of ambitious sustainability goals in the mid-century, so the model the maximum fraction of these advanced building is only 5% in this
assumes an approximately doubled retrofit rate (i.e., 3% as opposed to scenario. Renovations are carried out to achieve approximately 35%
the average 1.5%). This requires policy intervention. Most of the model’s energy savings from the stock average, as opposed to the state-of-the-
non-building input data, such as on GDP and population growth, urban- art savings, which can be as high as 95% in some climate and building
ization, and other key macroeconomic parameters are derived from the types, as demonstrated by best practices.
main GEA pathway work, and as such is consistent with its assumptions
on GDP and population growth, urbanization, and other key macroeco-
nomic parameters. These are explained in Chapter 17. 10.6.2.4 Main Assumptions and Input Data
The model estimates the additional investment costs needed for energy The model’s main assumptions and data sources are briefly described in
efficient construction and retrofits assumed and an estimation of the the GEA Chapter 10 Online Appendix. For a more detailed description,
resulting energy cost savings. The cost values are calculated based on see Ürge-Vorsatz and Petrichenko et al. (in preparation).
marginal expenditures as compared to standard construction and retro-
fit investments, while overall energy cost savings are based on com- The world’s building stock is broken into the same eleven regions as are
parison with a business-as-usual scenario, taking into account policies used elsewhere in the GEA (such as Chapter 17), which are presented
in place or in the pipeline. The overall model logic diagram is shown in in the technical appendix. These are: North America (NAM), Western
Figure 10.A.4 in the GEA Chapter 10 Online Appendix. Europe (WEU), Pacific OECD (PAO), Eastern Europe (EEU), Former Soviet
Union (FSU), Centrally Planned Asia (CPA), South Asia (SAS), Other
Pacific Asia (PAS), Middle East and North Africa (MEA),Latin America
10.6.2.3 Description of the Analyzed Scenarios and the Caribbean (LAC), and sub-Saharan Africa (AFR).
Two scenarios have been elaborated in the presented global building Specific Energy Demand Assumptions
energy use model: state-of-the-art and sub-optimal efficiency scenarios, Table 10.13 shows the specific energy demand figures that are used
which are described below. as an input to the model. It is important to note that it has been
extremely challenging to arrive at these figures. Necessary statistics
State-of-the-art Efficiency Scenario are rarely available, and even if they are, they contain different group-
This scenario demonstrates how far today’s state-of-the-art construc- ings, and thus during the regrouping new assumptions needed to
tion and retrofit know-how and technologies can take us in meeting the be introduced. For the majority of the regions, however, experience
GEA objectives as far as the provision of thermal comfort in buildings transfer and extrapolations, combined with interviews and expert
is considered, were they to become standard practice after a transition judgments, had to be applied to derive these figures. New and retro-
period. These standards are applied to all buildings in their respective fit data represent advanced standard practice today – i.e., reflecting
categories as they are retrofitted or constructed during the modeling new building codes and relatively ambitious energy retrofits taking
period, except for the small share of heritage buildings where lower place as a result of support programs. Advanced new and advanced
efficiency levels can be achieved in renovation. retrofit data are based on exemplary buildings for the respective cli-
mate zones, assuming that these can become standard practice from a
Sub-optimal Efficiency Scenario technological and economic perspective, after sufficient learning and
The rationale for this scenario is to illustrate the potential lock-in effect deployment phases, and under mature market conditions, but with
in building infrastructure that can be caused by accelerated major policy some allowance for lesser performance when scaled up to the entire
efforts (such as the ones currently implemented by many governments building stock. Figure 10.5, shown earlier, maps these values weighted
and international organizations for climate change mitigation)which do by respective floor areas.
not mandate sufficiently ambitious performance levels. Specifically, the
scenario assumes the same accelerated renovation rates as the state-
of-the-art scenario, to reflect that many countries recognize the import- 10.6.2.5 Results of the World Building Thermal Energy use
ance of energy-efficient retrofits and energy-efficient building codes, Scenario Analysis
but these accelerated retrofits and advanced new buildings are still built
and renovated to far less efficient levels than are achievable according As Figure 10.1 demonstrates, if today’s existing regional best practices
to the state-of-art scenario; thus they are referred to as “suboptimal” in building construction and retrofit proliferate and become the stand-
levels. ard, approximately 46% of global building heating and cooling final
energy use can be saved by 2050 as compared to 2005 levels. This is in
New buildings in this scenario are assumed to be built to the building spite of the approximately 126% increase in floor area during the period
codes for the region. Only in Western Europe (WEU) is it assumed that and a significant increase in comfort and energy service levels arising
706
Table 10.13 | Specific heating and cooling final energy use (kWh/m2/yr) figures assumed in the scenarios for different building types, vintages, and regions and climate zones.24
24 NAM has the same energy demand for multi-family and single-family buildings due to the aggregation of the residential sector in US EIA’s RECS data by climate but not by climate and type of dwelling.
Continued next page →
707
708
Table 10.13 | (cont.)
SAS Warm 65 42 15 46 20 65 42 10 46 15 96 55 15 75 17
Mod.
Tropical 35 23 17 25 25 35 23 17 25 25 96 65 25 75 30
Arid 35 23 12 25 20 35 23 12 25 20 96 65 18 75 18
PAS Warm 65 42 15 46 20 65 42 10 46 15 96 55 15 75 17
Mod.
Tropical 35 23 17 25 25 35 23 17 25 25 96 65 25 75 30
MEA Arid 87 50 12 50 20 62 60 12 60 20 62 65 20 75 25
LAC Warm 81 50 15 50 20 81 60 10 60 15 91 55 15 55 17
Mod.
Cold Mod. 196 50 20 50 30 170 60 15 60 20 209 65 15 65 20
Tropical 63 50 17 50 25 63 55 17 55 25 131 65 25 65 30
Arid 87 50 12 50 20 155 60 12 60 20 114 65 20 65 25
AFR Warm 120 50 15 50 20 100 60 10 60 15 100 55 15 55 17
Mod.
Tropical 63 50 17 50 25 63 55 17 55 25 65 65 25 65 30
Arid 87 50 12 50 20 62 60 12 60 20 62 65 20 65 25
Note: Sources of data are diverse, ranging from national statistics through literature review to personal interviews and expert judgments, largely by the author team of this chapter, for regions without documented data.
Source: US DOE, 2009a; 2009b; US EIA, 2003a; 2005; BMVBS, 1993; ICC, 2007; Feist et al., 2001; Schnieders, 2003; Mitthone, 2010.
Chapter 10 Energy End-Use: Buildings
709
Energy End-Use: Buildings Chapter 10
6 6
5 5
4 4
3 3
2 2
1 1
0 0
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
OECD90 ASIA REF LAC AFR
Figure 10.22 | Space heating and cooling final energy use in the five aggregate GEA regions, 2005–2050, in state-of-the-art and sub-optimal scenarios for the five regions:
heating and cooling final energy use development for scenarios (i.e., assuming sub-optimal renovation and construction energy performance levels).
new construction, a holistic optimization is not followed, later instal- The lock-in risk is high in all regions, in the range of 40–200% of 2050
lation of even the highest efficiency equipment or building materials state-of-the-art energy use, but its composition is different. The rela-
will not be able to capture the savings otherwise attainable in a com- tive importance of renovation and new construction is different in each
prehensive refurbishment. For instance, heat losses and gains will still region. Figures 10.23–10.26 show state-of-the-art and sub-optimal
occur through other, non-optimized building parts. Finally, each retro- renovation scenarios in the eleven GEA regions broken down by vin-
fit is associated with significant transaction costs and inconveniences, tage (age) and efficiency level. In OECD, the difference in energy use is
including finding contractors, planning, preparing contracts, perhaps primarily due to differences in renovation efficiency levels (see Figure
obtaining the financing, putting up scaffolding or other construction 10.23), while in Asia it is almost entirely due to sub-optimal perform-
support structures, painting and finishing surfaces after it is done, etc. ance standards in the new building stock (Figure 10.24). In regions of
Thus, in subsequent “top-up” retrofits, energy savings are smaller and the world that are highly developed or had built the majority of their
costs higher, with fixed costs comparable to those for a comprehen- building stock up to 100 years ago, there is great potential to incur a
sive, deep retrofit. As a result, going back for non-captured savings after future energy penalty due to the renovation lock-in effect. This occurs
suboptimal retrofits or new construction is typically so expensive on a when there is a large part of the building stock that has been built to
specific cost, such as cost/tCO2 saved, basis that other mitigation or sus- lower energy standards in the past and is not scheduled for demoli-
tainability measures will likely become much more attractive, whereas tion or a deep energy retrofit in the near term. This problem is exac-
this is not the case if they are originally part of an integrated, deep erbated by the fact that buildings have a very long service life, over
design retrofit or construction. 150 years in some parts of Europe, and will continue to have the same
energy demand until they are appropriately renovated. This points to the
Figure 10.22 shows large increases in energy demand in the suboptimal importance of different priorities in building-related policymaking in the
scenario for the regions of the developing world, where the ASIA region different regions. In historic regions, ambitious renovation policy – con-
(Asia, excluding the OECD90 countries26) has the most pronounced sisting of accelerated renovation dynamics emphasizing state-of-the-art
increase. The results for the OECD90 countries show that there is still a energy performance levels – is important, while in dynamically devel-
decrease in total building energy demand in the sub-optimal scenario oping regions new building codes are paramount for achieving a low
due to already gradually strengthening new building codes, less dynam- building energy future. Figure 10.23 demonstrates that retrofits are also
ically growing floor space, and actions taken toward efficient retrofits. important in the more dynamically developing regions.
Conversely, in ASIA there is a major increase in energy demand due to
presently unsaturated thermal energy service levels and partially less
The Rebound Effect and the Elimination of Fuel Poverty
ambitious building codes.
The logic of the model is that when a new building is constructed it applies
the average specific energy use of the new stock – either low or high effi-
ciency – that is either based on state-of-the-art case studies or building
26 OECD90 comprises countries that were members of OECD in 1990. codes, i.e., assuming full thermal comfort in the entire building. As a result,
710
Chapter 10 Energy End-Use: Buildings
2010
2015
2020
2025
2030
2035
2040
2045
2050
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
Western Europe Western Europe
State of the Art Scenario Sub-Optimal Scenario
PWh/year PWh/year
3.5 3.5
3 3
2.5 2.5
2 2
1.5 1.5
Adv New
1 New 1 New
Adv Ret
Retrofit
0.5 Retrofit 0.5
Standard Standard
0 0
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
PAcific OECD PAcific OECD
State of the Art Scenario Sub-Optimal Scenario
PWh/Year PWh/Year
0.8 0.8
0.7 0.7
0.6 0.6
0.5 0.5
0.4 0.4
Adv New
0.3 0.3
New
New
0.2 Adv Ret 0.2
Retrofit Retrofit
0.1 0.1
Standard Standard
0 0
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
Figure 10.23 | Comparison of the two GEA building scenarios for OECD90 regions, final thermal energy use by construction type.
711
Energy End-Use: Buildings Chapter 10
2010
2015
2020
2025
2030
2035
2040
2045
2050
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
Western Europe Western Europe
State of the Art Scenario Sub-Optimal Scenario
PWh/year PWh/year
3.5 3.5
3 3
2.5 2.5
2 2
1.5 1.5
Adv New
1 New 1 New
Adv Ret
Retrofit
0.5 Retrofit 0.5
Standard Standard
0 0
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
0.8 0.8
0.7 0.7
0.6 0.6
0.5 0.5
0.4 0.4
Adv New
0.3 0.3
New
New
0.2 Adv Ret 0.2
Retrofit Retrofit
0.1 0.1
Standard Standard
0 0
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
Figure 10.24 | Comparison of the two GEA building scenarios for ASIA Regions, final thermal energy use by construction type.
712
Chapter 10 Energy End-Use: Buildings
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
PWh/year Eastern Europe PWh/year Eastern Europe
State of the Art Scenario Sub-Optimal Scenario
0.8 0.8
0.7 0.7
0.6 0.6
0.5 0.5
0.4 0.4
2010
2015
2020
2025
2030
2035
2040
2045
2050
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
Figure 10.25 | Comparison of the two GEA building scenarios for REF regions, final thermal energy use by construction type.
fuel/energy poverty is fully eliminated by the time the entire building stock Investment Costs and Energy Cost Savings
has been either replaced or renovated, i.e., before 2050 through assuming Implementation of the state-of-the-art-scenario worldwide requires
full thermal comfort to everyone. This results in significant thermal com- approximately US2005$14.2 trillion of cumulative undiscounted invest-
fort increases, especially in regions having unsaturated thermal comfort ments until 2050, if a 60% cost learning27 is assumed for new technolo-
levels – i.e., spaces not heated or cooled to medically acceptable levels – gies and know-how. This value is US2005$18.6 trillion without any cost
in all of our scenarios. As a result, it is possible that the state-of-the-art learning. In contrast, these investments result in a US2005$57.9 trillion
new building is actually more energy intensive than the inefficient existing cumulative undiscounted energy cost saving for the same period. Figure
ones. Traditionally, this is referred to as the rebound effect; it is important 10.27 shows these results on cumulative investments and energy cost
to note that the direct rebound effect has been fully considered in the savings by 2050 for the different GEA regions of the world.
scenarios. It is not possible to have more thermal comfort, since heating
or cooling beyond the comfortable levels will not result in increases in The cost values are calculated based on marginal expenditures as com-
well-being but rather compromises it. However, this is not considered an pared to standard construction and retrofit investments, and energy
undesirable effect, but rather, one of the primary goals of the scenarios
and an integral part of the GEA approach: to provide adequate energy
27 Approximately 60% reduction in costs of low-energy buildings construction and
service levels to those presently suffering from energy poverty or other renovation by 2030 as a result of large market size, technology learning, and
limitations due to inadequate thermal energy services. optimization.
713
Energy End-Use: Buildings Chapter 10
0.6 0.6
0.4 0.4
0.2 0.2
0.0 0.0
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
Latin America Latin America
PWh/year State of the Art Scenario PWh/year Sub-Optimal Scenario
1.8 1.8
Adv New New
1.6 New 1.6
Retrofit
Adv Ret
1.4 Retrofit 1.4 Standard
Standard
1.2 1.2
1 1
0.8 0.8
0.6 0.6
0.4 0.4
0.2 0.2
0 0
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
AFRica AFRica
PWh/year State of the Art Scenario PWh/year Sub-Optimal Scenario
1.8 1.8
Adv New New
1.6 New 1.6 Retrofit
Adv Ret
1.4 1.4 Standard
Retrofit
1.2 Standard
1.2
1 1
0.8 0.8
0.6 0.6
0.4 0.4
0.2 0.2
0 0
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
2005
2010
2015
2020
2025
2030
2035
2040
2045
2050
Figure 10.26 | Comparison of the two GEA building scenarios for MEA, LAC, and AFR regions, final thermal energy use by construction type.
714
Chapter 10 Energy End-Use: Buildings
FSU
EEU 10
trl.USD(2005)
5
WEU WORLD
trl.USD
4 60
NAM 5 50
trl.USD
10 3
trl.USD
10 2 40
5 0
1 30
trl.USD
5 0 20
0 CPA
10
0 10 0
trl.USD
5 SAS 5
4 MEA 5
trl.USD
3 4 0
trl.USD
2 3
1 2
5
0 1 PAS
4
0
trl.USD
3
5 LAC 2
5 AFR
4 4 1
trl.USD
trl.USD
3 3 0
2 2
1 1 5 PAO
0 0 4
trl.USD
3
Cumulave investmencosts with 2
cost learning for 2005-2050 1
0
Cumulave investmen costs without
cost learning for 2005-2050
Cumulave energy cost savings for
2005-2050
Figure 10.27 | Cumulative undiscounted investment costs and energy cost savings in different regions and worldwide, US2005$ trillion.
cost savings as compared to a business-as-usual scenario, taking into Therefore, while numbers should not be precisely compared, the figures
account policies in place or in the pipeline. Energy prices and projections illustrate well that most major building energy use scenarios reinforce
are based on IEA statistics and US EIA data (2010). An update of the the achievability of this sector’s significant energy use reduction poten-
calculations and further details of the methodology and assumptions is tial with ambitious policies, and its substantial growth without strong
documented in (Ürge-Vorsatz and Petrichenko et al., in preparation). efforts (except WEO10 New Policy and WEO06 ALT).
The results presented in Figure 10.27 are comparable to other exist- The GEA Chapter 10 Online Appendix discusses, in detail, how these
ing estimations. For example, in Laustsen (forthcoming) cumulative scenarios relate to the main GEA scenarios described in Chapter 17, and
additional incremental investments for the period 2010–2030 in a further discuss the limitations of the model.
case with considerable reduction in final energy use for heating, cool-
ing and hot water are about US2005$16 trillion. Cumulative investment
costs for the realization of the Blue Scenario in IEA (2010a) – which 10.6.2.6 Conclusions from the GEA Building Thermal Energy
assumes maximizing the deployment of energy-efficient technologies, Scenarios
achieving substantial renovation of three-quarters of the OECD build-
ing stock by 2050, and ensuring the widespread deployment of new GEA building scenario analysis has demonstrated that building ther-
technologies – are around US$12 trillion for the period 2007–2050. mal energy use can significantly decrease by the mid-century despite
expected growth in living space, well-being, and energy service levels,
Comparison of the Results with Other Existing Models and despite the GEA assumption that fuel poverty is fully eliminated in
In order to verify the findings of the model, the authors have calibrated two decades. Assuming that today’s state-of-the-art becomes standard
global estimations of energy use in the building sector of a few landmark practice in new construction and retrofit, world space heating and cool-
and reliable recent studies. The results of the comparison are presented in ing energy use can decline by 46% in 2050 from 2005 levels, in spite
detail in Ürge-Vorsatz and Petrichenko et al. (in preparation), and summa- of the approximately 126% growth in global floor space, elimination
rized in Figure 10.28, as well as in Table 10.14. However, it is important to of fuel poverty, and significant increases in thermal comfort levels. The
note a few major points that limit how far the messages of such compari- implementation of such a scenario requires an approximately US$14.2
son can be interpreted. First, the GEA buildings model specifically covers trillion undiscounted investment (US$18.6 trillion without technology
the final energy use for space heating and cooling, while most other mod- learning), but results in US$58 trillion savings in undiscounted energy
els include other end-uses – e.g., Laustsen (forthcoming) also considers expenditures. However, while this scenario is achievable at net profit, it
domestic hot water (IEA, 2006; IIASA, 2007; IEA, 2008a; IEA, 2010a; IEA, does require significant policy effort.
2010b). Moreover, methodologies, assumptions, and metrics differ among
the analyzed studies. Thus, precise comparison among the models is not At the same time, the analysis has also demonstrated the significant
possible. However, the general trends can be captured. Figure 10.28 illus- risk of the lock-in effect. If policies are implemented to reduce building
trates all the scenarios analyzed and Table 10.14 presents the percentage energy use, such as building codes and support to accelerate energy-
of change in thermal energy use from 2005 to 2050. efficient renovation, but these do not mandate the state-of-the-art,
715
Energy End-Use: Buildings Chapter 10
Harvey Harvey
35 GEA- Low
GEA Laustsen WEO10 High ETP10 ETP08 WEO06
3CSEP GDP GDP
30
25
20
PWh
15
10
2050 "Fast"
2050 "Fast"
2050 "SUB"
2050 "LOW"
2050 "Supply"
2050 "Efficiency"
2050 "BAU"
2035 "New"
2035 "Base"
2050 "Base"
2050 "BlueMap"
2030 "REF"
2030 "ALT"
2005
2005
2050 "Mix"
2005
2035 "Current"
2008
2005
2050 "Slow"
2005
2050 "Slow"
2007
2035 "Blue"
2005
2005
Figure 10.28 | Thermal energy use in the global building sector for different scenarios projected by different models. Source: for WEO06 ALT and WEO06 REF – IEA, 2006; for
GEA Efficiency, GEA Mix, and GEA Supply – IIASA, 2007; for ETP08 ACT Map, ETP08 BlueMao, and ETP08 Base – IEA, 2008a; for Harvey Low Fast, Harvey High Fast, Harvey
Low Slow, and Harvey High Slow – Harvey, 2010; for ETP10 Blue and ETP 10 Base – IEA, 2010a; for Laustsen Factor 4 and Laustsen BAU – Laustsen, forthcoming; for WEO10
New WEO 10 Current Policy – IEA, 2010b.
Note: Bars should not be compared precisely due to the reasons described in the text.
but rather only suboptimal efficiency levels, there will be substantial 10.6.3 Description of Appliance Energy Scenarios
energy penalties; thus, energy use is locked-in for many decades due
to the very long lifetime and renovation cycle of buildings. As a result, If the world embarks upon an ambitious strategy to improve the
energy use increases by 32.5% by 2050 instead of a 46% decline as energy performance of its buildings, currently already pursued in sev-
compared to 2005, resulting in a 79% lock-in by 2050 as expressed in eral regions, the building energy demand toward the middle of the cen-
terms of 2005 world building thermal energy use. Therefore, it is essen- tury may start to be dominated by electric appliances and other plug-in
tial that building-related energy policies do not compromise target per- loads. Therefore it is paramount to also investigate the possibilities of
formance levels, and are most ambitious from as early as possible. energy savings through improved efficiency in energy-using equipment.
The present section describes the potential of energy savings if very
The state-of-the-art scenario, while extremely ambitious, can be aggressive energy efficiency programs would be applied to the equip-
achieved through a combination of policy instruments, of which build- ment in buildings in different world regions.
ing codes and equipment energy performance standards are the pillars.
While state-of-the-art new construction is often a little more expen- The description of the Bottom-Up Energy Analysis System (BUENAS)
sive than conventional new-built, it can sometimes be less expensive, model, developed by LBNL, and its adoption to the GEA scenario exer-
and deep retrofits do incur substantial capital investments. Although cise is included in the GEA Chapter 10 Online Appendix.
these are investments that pay back well within the remaining life of
the building, financing is key for renovation. Section 10.8 is devoted to
exploring the policy space and the menu and effectiveness of different 10.6.3.1 BUENAS Model Results
policy options that can take us to this more sustainable building energy
future, and which are necessary for the implementation of the state-of- In the long term, that is, beyond 2030 and up to 2050, the efficiency
the-art scenario. improvements to the stock initiated in 2010 and enhanced in 2020
716
Chapter 10 Energy End-Use: Buildings
Table 10.14 | Relative change in building thermal energy use from buildings for different global scenarios.
will have permeated the stock almost completely due to the replace- to reduce standby nearly to zero (0.1 W) per appliance. The total
ment of old appliances with more efficient ones. Therefore, relative savings for all appliances is 3718 TWh, or 65% of the demand. The
energy use of the stock after 2030 will largely scale according to savings for all other appliances is 50% or greater, with the exception
the efficiency level in 2020 relative to the baseline. In order to avoid of washing machines in Latin America and the Caribbean. In that
dependence on assumptions of market-driven efficiency improve- case, efficiency gains are expected to be largely offset by increases
ments, BUENAS calculates energy savings demand versus a frozen in capacity and market shifts from semi- to fully-automatic washing
efficiency case rather than a business-as-usual scenario. Frozen effi- machines.
ciency electricity demand, absolute savings, and percent savings are
shown in Table 10.15. Figure 10.29 shows a graphical representation of the efficiency
scenario. In this picture, appliance efficiency is currently rising rap-
The results show that electricity consumption for appliances studied, idly, but growth will be slowed somewhat by standards in 2010,
which is estimated at 1582 terawatt hours (TWh) in 2005, will double by then more dramatically curtailed in 2020. From 2020 to about 2030,
2025, and will nearly double again to 5696 TWh in 2030 in the absence growth will actually be negative, and by 2030 total consumption
of significant efficiency improvement. Much of the growth in appliance will be roughly equivalent to 2005 levels. After that, however, the
use during this period will occur in developing countries, especially in demand begins to grow again, although at a much lower rate than
ASIA. By 2050, the OECD90 countries will still have the highest con- base case demand.
sumption for most appliances, but will be surpassed by ASIA for refrig-
erators, fans, and televisions, appliances that will be present in nearly all In conclusion, the scenario shows that a very significant reduction in
Asian households by that time. appliance electricity demand is possible, given the current state of tech-
nologies. It is unlikely, however, that technologies common on today’s
Electricity savings will vary between appliances and regions. In abso- market will result in energy demand that is only a small fraction of
lute terms, savings in 2050 will be largest for refrigerators, with 1171 today’s consumption. For that to happen, new, very high efficiency
TWh, followed by standby power with 961 TWh and televisions with technologies must be developed, marketed, and adopted on a wider
842 TWh. In relative terms, standby power offers the largest oppor- scale. Such a high tech scenario, which at this point would be some-
tunity for savings, with the assumption of the technical capability what speculative, is an interesting topic for further study.
717
Energy End-Use: Buildings Chapter 10
Table 10.15 | Appliance electricity demand and savings in 2025 and 2050.
10.7 Co-benefits Related to Energy Use include: improvements in energy security and sovereignty; net job cre-
Reduction in Buildings ation; elimination or reduction in indoor air pollution-related mortality
and morbidity; other health benefits; alleviation of energy poverty and
10.7.1 Key Messages improvement of social welfare; new business opportunities, mostly at
the local level; stimulation of higher skill levels in building professions
A future involving highly energy-efficient buildings also results in sig- and trades; improved values for real estate and enhanced ability to rent;
nificant associated benefits – typically with monetizable benefits at and increased comfort, well-being and productivity.
least twice the operating cost savings, in addition to non-quantifiable or
non-monetizable benefits now and avoided impacts of climatic change A survey of quantitative evaluations of such multiple benefits shows
in the future. Multiple benefits beyond climate change mitigation that even single energy efficiency initiatives in buildings in individual
718
Chapter 10 Energy End-Use: Buildings
6000 calculation, considering multiple benefits together may help the total
benefits significantly outweigh the costs, or be sufficient motivation
5000 to enable action. However, this is only possible if public policymaking
Television frameworks are adequately integrated to allow benefits in such other-
4000 Standby wise disjointed areas to be combined. Private decision makers can take
advantage of multiple benefits in decision making if tools are available
Refrigeraon
TWh
719
Energy End-Use: Buildings Chapter 10
Table 10.16 | Typology of benefits of energy efficiency and distributed energy use in the buildings sector and selected indicators for their potential quantification.
Category Non-energy benefits Examples of indicators and concepts for its quantification
Health effects Reduced mortality Mortality risk (acute and chronic), Years of Life Lost (YLL), Loss of Life Expectancy (LLE),
Value of a Life Year (VOLY), Value of a Statistical Life (VSL), hedonic wages.
Reduced morbidity and other negative physiological effects Avoided hospital admissions, Restricted Activity Days (RAD), Years Lived with Disability
(YLD), Disability Adjusted Life Years (DALY), Quality Adjusted Life Years (QALY), Cost
of Illness (COI: direct medical costs plus cost to the society from lost earnings),
productivity loss and lower learning performance.
Ecological effects Reduced impacts on ecosystems and crops Acidification, eutrophication, exposure to tropospheric ozone, atmospheric deposition
of pollutants, critical loads, number of protected hectares, Potentially Disappeared
Fraction (PDF)
Construction and demolition waste reduction Percentage of reduction in construction and demolition wastes.
Lower water consumption and sewage production Percentage of reduction in water consumption and sewage production,
Economic effects Lower energy prices1 Inverse price elasticity of supply.
Employment creation2 Employments per unit of investment, multiplier effect, working age population relying
on unemployement benefits,
New business opportunities New market niches
Rate subsidies avoided3 Decrease in the number of subsidized units of energy sold, percentage of the energy
price subsidized,
Enhanced value of the buildings capital stock. Higher resale and rental prices.
Energy security Reduced dependence on imported energy,.
Improved productivity Drop in absenteeism rates, reductions in voluntary terminations, GDP/income/profit
generated.
Service provision benefits Transmission and distribution loss reduction Value of eliminated energy losses.
Fewer emergency service calls Saving staff time and resources necessary for attending the calls.
Utilities’ insurance savings4 Decrease in the insurance costs of utility companies.
Lower bad debt write-off5 Decrease in the average size of bad debt written off, decline in the number of such
accounts.
Social effects Fuel poverty alleviation Reduced expenditures on fuel and electricity; reduced fuel / electricity households debt;
reduced excess winter deaths.
Increased comfort Mean household temperature,reduction of outdoor noise infiltration (dB).
Safety increase (fewer fires) Reduced number of fires and fire calls.
Increased awareness (Conscious) reductions in energy use, higher demand for energy efficiency measures.
Notes:
1. However, it is unlikely that initiatives at local, regional or even national scales bring sufficient reductions in the overall energy demandto affect prices set internationally.
2. To be incorporated as a benefit into cost-benefit analysis, only net employment creation can be accounted for.
3. Rate subsidies can be defined as lower, subsidized rates provided by utilities for their low-income customers (Schweitzer and Tonn 2002).
4. Reducing gas leaks and repair of faulty appliances (as a part of weatherization programs) decreases the insurance costs of utility companies.
5. Writing off the portion of a bad debt which is not paid by customers to the utilities (Schweitzer and Tonn 2002).
having access to clean energy sources. The health benefits of avoiding and loss of productivity (WHO, 2000). Improving building ventilation and
the inefficient indoor burning of traditional biomass and other solid insulation allows the control of air exchange rates and reduces indoor air
fuels is thoroughly discussed in Chapter 4; it could translate into avoid- pollution and outdoor noise infiltration (Jakob, 2006). This provides oppor-
ing up to 1.5 million deaths/yr by 2030 (IEA, 2010d). tunities for enhancing public health protection through retrofitting and
weatherization programs.. In particular, state-of-the-art buildings elimin-
Providing access to cleaner fuels like LPG and more efficient stoves with ate, or significantly reduce, the health effects of indoor radon, dampness
enhanced ventilation systems would substantially improve in-house air and mold, house dust mites, Volatile Organic Compounds (VOCs), NO2,
quality and reduce household fuel collection and cooking time (Hutton and secondhand tobacco smoke (see Chapter 4).
et al., 2007). Furthermore, indoor air pollution is also a health concern in
developed countries because of problems related to inadequate ventila- The buildings sector will also play a role in reducing mortality and mor-
tion (Kats, 2005) and the so-called Sick Building Syndrome (SBS), discussed bidity if energy-efficiency and -saving programs are able to reduce out-
earlier in the chapter, which result in low work and learning performance door air pollution, thus lowering end-use energy demand, especially
720
Chapter 10 Energy End-Use: Buildings
when emissions arise from the direct combustion of fossil fuels like coal (see Section 10.1.4), longer building lifetimes and lower resource con-
and oil for heating and cooking (see Chapter 4). Many studies (Aunan sumption will bring about reduced amounts of embodied energy and
et al., 2000; Samet et al., 2000; DEFRA, 2004; Rypdal et al., 2007; van GHG emissions.
Vuuren et al., 2008) have translated the reduction of human mortal-
ity and morbidity stemming from outdoor air quality improvements
and climate policies into monetary terms. In the European Union, large 10.7.6 Economic Effects
research initiatives such as ExternE (Bickel and Friedrich, 2005), NEEDS
(Ricci, 2009), and CASES (FEEM, 2008) have identified and put an eco- Creating employment and enhancing the overall productivity of the
nomic value on the negative health-related externalities of the life cycle economy are broad macroeconomic goals that energy efficiency and
of energy provision that can also be avoided through energy demand saving programs can help to achieve. In underdeveloped, often rural
reductions. regions the lack of modern energy is a primary cause of poverty.
Improving energy efficiency would result in better energy security and
Additionally, connections have been established between cold and less dependence on imported energy sources (IEA, 2004; Behrens and
damp houses and excess winter deaths, respiratory illness, asthma, Egenhofer, 2007). Also other co-benefits, such as the increased value
and impaired mental health (Morrison and Shortt, 2008). Therefore, of real estate and lower energy prices, have welfare implications for
improving building capital stocks for fuel poverty alleviation is also households.
expected to generate physical health (Clinch and Healy, 2001) and
psychosocial and mental health benefits related to warmer indoor Characteristics of buildings and indoor environments significantly
environments, as discussed in Chapter 4. Such weatherization pro- influence rates of communicable respiratory illness, allergy and
grams are especially beneficial in countries with poor housing condi- asthma symptoms, sick building symptoms, and worker performance
tions, where the problem of fuel poverty is especially acute (Clinch (Fisk, 2000). Related to that, productivity increase at the micro level
and Healy, 1999). has been documented and may reach about 6–16% in efficient build-
ings (Lovins, 2005), which translates into direct financial benefits: a
1% increase in productivity, ~5 minutes/employee/day, is calculated
10.7.5 Ecological Effects at US$600–700/employee/yr or US$3/ft2/yr in the United States (Kats,
2003).
Reducing energy use in buildings results in a lower concentration of
outdoor air pollutants (NOx, NH3, SO2, VOC, or PM) that damage eco- Research also indicated that investing in energy efficiency renova-
systems and crops, which will then be better protected against acid- tion in the buildings sector has positive net employment effects once
ification and eutrophication and less exposed to elevated ground level job losses in energy supply sectors are accounted for. Given the dis-
tropospheric ozone concentrations (EEA, 2006; van Vuuren et al., 2008). tributed nature of direct, indirect, and induced employment effects,
This includes the reductions in of various negative externalities like the additional jobs are expected to be geographically widespread (for
impacts of acid rain and ozone in forests and the effects of acidification Hungary, see Ürge-Vorsatz et al., 2010). The experience has pointed
on recreational fisheries, as well as a reduction in noise pollution, vis- at spatial overlaps of fuel poverty and high unemployment. Promoting
ual amenity disruption, and major accident risks (European Commission, energy-efficient renovations in fuel poverty affected areas will bene-
1995). A growing body of literature on the economic value of ecosys- fit fuel-poor households by also providing additional income-earning
tem services (Costanza et al., 1997; Torras, 2000; CBD, 2001; Hein et al., opportunities (ACE 2000).
2005; Nahuelhual et al., 2007) provides a basis to establish a connection
between energy efficiency and saving actions and enhanced ecosystem
services provision. 10.7.7 Service Provision Benefits
Retrofitting and weatherization programs also extend the lifetime Improvement of energy efficiency and emission reduction in the build-
of buildings and increase resource use efficiency. For instance, Kats ings sector may result in higher quality provision of a number of
(2005) and SBTF (2001) estimated that building green and efficient energy-related services. This category of co-benefits include, inter alia,
houses could reduce construction and demolition wastes over 50%, transmission and distribution (T&D) loss reduction, fewer emergency
and up to a maximum of 99%, as compared to an average practice. In service calls, utilities’ insurance savings, and lower bad debt write-
the United States, Schweitzer and Tonn (2002) found significant reduc- off (Schweitzer and Tonn, 2002; Stoecklein and Skumatz, 2007). Even
tions in water consumption and sewage production over the lifetime though these are mostly related to the functioning of utility compan-
of energy-efficiency measures, i.e., low-flow showerhead and faucet ies, they can well translate into economic benefits, i.e., positive wel-
aerators. Since building construction, operation, and decommission- fare changes, as long as similar comfort and service provision levels are
ing are energy-using activities, as is water provision and treatment achieved with fewer resources.
721
Energy End-Use: Buildings Chapter 10
10.7.8 Social Effects methodology and approach which has not yet been possible for poten-
tial assessments either.
Energy efficiency in the buildings sector can also contribute to tackling
social issues, such as poverty and fuel poverty. High-efficiency retro-
fitting of the existing building stock or the construction of near-zero- 10.8 Sector-Specific Policies to Foster
energy new buildings, can alleviate, and in some cases fully eliminate, Sustainable Energy Solutions in Buildings
fuel poverty. This, in turn, saves large amounts of public funds that are
being spent on relief for those in fuel or energy poverty. 10.8.1 Key Messages
722
Table 10.17 | Benefits of GHG mitigation in the buildings sector and methodologies for their assessment in the worldwide literature.
Health effects
Morbidity and other negative USA, New Zealand, Denmark • USA: Improved indoor air quality • USA: Ventilation increased may result in National Medical Expenditure Survey, 1999; Kats,
physiological effects reduction reduced asthma occasions by 38.5%; net savings of US2005$527/employee-yr. that 2005
a 25% reduction in asthma incidence represent the productivity lost on a national Milton et al., 2000; Schweitzer andTonn, 2002;
in an average 900-student school scale of US2005$30 billion/yr. Stoecklein andSkumatz, 2007; Fisk,1999
translates into 20 fewer children/yr. • USA: Better ventilation and indoor air quality
with asthma. could reduce influenza and cold by 9–20% in
• Denmark: The improvement of thermal population (ca. 16–37 million fewer cases) that
air quality led to better concentration translates into annual savings of US2005$7.5–
of 15% of respondents and a 34% 17.4 billion.
decrease in the number of respondents
with sick building syndrome.
Mortality reduction Hungary; USA, Ireland, Norway, • USA: Every 10 g/m3 increase in ambient • Hungary: The energy saving program resulted Aunan et al., 2000; Samet et al., 2000; Clinch and
worldwide particulate matter (the day before in the total health benefit of US2005$854 Healy, 1999; Clinch and Healy, 2001; Hutton et al.,
deaths occur) brings a 0.5% increase in million/yr. due to a decrease of chronic 2007
the overall mortality. respiratory diseases and premature mortality.
• Ireland, Norway: The share of excess • reland: the expected health-benefits (mortality
winter mortality attributable to poor and morbidity reduction) of a proposed
thermal housing standards is 50% for domestic energy efficiency program amount
cardiovascular disease and 57% for to US2005$1.88 billion (at the 5% Irish
respiratory disease. government’s discount rate) over 20 years.
• Worldwide: more than 3 billion people • Worldwide: the global annual economic
cook with solid fuels on open fires or benefits (incl. less expenditure on health care,
traditional stoves, resulting in more health-related productivity gains, fuel collection
than 1.5 million deaths annually and and cooking time savings, and environmental
a multitude of negative economic and impacts) of halving the population currently
environmental impacts. lacking access to cleaner fuels (LPG)
would amount to US2005$91 billion at a net
intervention cost (incl. fuel, stove, and program
costs, from which monetary fuel cost savings
are subtracted) of US2005$13 billion. Improving
stoves would generate US2005$105 billion in
economic benefits at a negative net cost of
US2005$34 billion.
Ecological co-benefits
Reduced impacts on ecosystems and Europe • The application of the Kyoto protocol in Europe is expected to reduce from 16.1% (93.4 Van Vuuren et al., 2008
crops million ha in 1990) to 1.5% (8.7 million ha in 2010) the share of ecosystems unprotected to
acidification. The figures for areas with excess deposition of nutrient nitrogen are, respectively,
30.5% (166 million ha in 1990) and 18.8% (103 million ha in 2010).
Construction and demolition waste USA • The Construction and demolition diversion rates are 50–75% lower in green buildings (with SBTF, 2001; Kats, 2005
benefits reduction the maximum of 99% in some projects) as compared to an average practice
723
724
Table 10.17 | (cont.)
Lower water consumption and sewage USA • The NPV of reduction in waste water and sewage over the measure lifetime isUS$3.4–657/ Schweitzer andTonn, 2002
production household.
Social co-benefits
Fuel poverty alleviation UK • UK: Energy efficiency schemes applied to 6 million households in January-December 2003 DEFRA, 2005
resulted in an average benefit of US2005$19.9/household-yr.
Increased comfort, Ireland, New Zealand, Switzerland • Ireland: the mean household • Ireland: The total comfort benefits of a StoeckleinandSkumatz, 2007; Jakob, 2006; Clinch and
temperature once completed the proposed domestic energy efficiency program Healy, 2001
proposed domestic energy efficiency amount to US2005$748 million discounted at
program increases from 14 to 17.7 ˚C. 5% (Irish government’s discount rate) over
• Switzerland: old windows reduce the 20 years;
level of external noise in the interior • New Zealand: Comfort (including noise
of the building by about 20–25 dB, reduction) benefits gained after the
whereas new ones achieve 33–35 dB. implementation of weatherization program
38–40 dB reductions are also possible amount to US2005$130.3/household-yr,
if asymmetric triple glazing is applied equivalent to 43% of the saved energy costs.
Safety increase (fewer fires) USA • The NPV over the lifetime of the measures installed is US$0–555/household. Schweitzer andTonn, 2002
Note: (i) conversion of monetary units to US2005$ was done whenever possible by applying Consumer Price Index (CPI) and exchange rates of the corresponding years or periods and nations.
725
Energy End-Use: Buildings Chapter 10
A great variety of policy instruments have been implemented worldwide Table 10.18 | Indicators of Cost-effectiveness of policy instruments based on best
to promote energy efficiency in the buildings sector. There is no single practice cases.
policy instrument that can capture the entire energy saving potential.
High Medium Low
Due to the especially diverse and strong barriers in this sector, it requires
cost of energy conserved US2005$/kWh <0 0 – 0.01 >0.01
an equally diverse portfolio of policy instruments for effective and far-
reaching energy conservation. Policy instruments for promoting energy benefit-cost ratio (B/C) >1 0.8 – 1 <0.8
• Economic and market based instruments, such as energy perform- Recent reviews (Khan et al., 2007; Novikova, 2010) examined the out-
ance contracting28, cooperative technology procurement, energy effi- comes of policies. These are: (a) the degree to which a policy tool achieves
ciency certificate schemes, the Kyoto flexible mechanisms, regional the target, often referred to as policy effectiveness; (b) the extent to
carbon trading platforms and carbon offset programs, etc. These which a tool has made a difference compared to the situation without
are directly or indirectly aimed at steering economic actors toward it, referred to as net impact of the policy tool; and (c) the relationships
improved energy efficiency. between the net impact and spending required, referred to as cost-effec-
tiveness. What follows is summarized from perspectives of effectiveness
• Fiscal instruments, which usually correct energy prices through for energy saving and cost-effectiveness of policy tools. Also, the best
either the implementation of taxes, tax exemptions or reductions, attempt has been made to identify limitation and success factors.
public benefit charges, the removal of fossil fuel subsidies, etc., or by
providing financial support, e.g., capital subsidies, grants, subsidized Since studies reviewed used different methodologies for evaluation of
loans, rebates, property-assessed clean energy (PACE)29 financing, policy effectiveness, these estimates were converted to a uniform for-
etc., if first cost-related barriers are to be addressed. mat. For each implemented policy case study, the amount of energy
saved as a result of the policy instrument in question was determined,
• Support and information programs and voluntary action. Instruments both in absolute and relative terms – i.e., compared to a logical base-
classified under this group are very diverse and comprise voluntary line, such as total national energy or electricity consumption in the par-
certification and labeling programs, voluntary agreements, public lead- ticular sector and/or end-use. However, this was often not possible due
ership programs, awareness-raising, education and information cam- to lack of data. Furthermore, the comparability of these estimates with
paigns, detailed billing and disclosure programs, the establishment other cases or policy instruments is in many cases very limited. Thus,
the effectiveness of the various policy instruments examined was evalu-
ated in a qualitative way, by assigning grades of “low,” “medium,”
28 Energy performance contracting is not a policy tool per se, but a business model and “high” based on energy saving figures, but taking into account the
that delivers a similar impact on transformation of the market toward higher energy overall applicability and potential of the instrument. The effectiveness of
efficiency as policy tools. Due to this reason, energy performance contracting is often
policies working in limited end-use categories was balanced with those
added to policy tools.
29 The PACE model is a relatively new financing structure that enables local govern- affecting most end-uses; if the instrument works in a narrow energy
ments to raise money through the issuance of bonds or other sources of capital to end-use but can achieve an important reduction in that category, such
fund energy efficiency and renewable energy projects, thus lowering the up-front as appliance standards, it could qualify as “high.” (See Table 10.18.)
cash payment for property owners. The financing is repaid over a set number of years
through a special tax or assessment only on those property owners who voluntarily
choose to attach the cost of their energy improvements to their property tax bill. The The cost-effectiveness of the policy instruments examined was also
PACE approach attaches the obligation to repay the cost of improvements to the evaluated with qualitative grades, which are based on best practice
property, not the individual borrower, creating a way to pay for the improvements if
the property is sold.
cases and on the approximate ranges presented in Table 10.18.
726
Chapter 10 Energy End-Use: Buildings
The comparative assessment of policy instruments presented in prevents energy efficiency improvements. In general, tax exemptions
Table 10.19 reveals significant differences between them, especially were found to be the most effective tool in the category of fiscal instru-
concerning cost-effectiveness. The governmental costs of policy tools ments, while subsidies, grants, and rebates can also achieve high sav-
in the sample varied widely: figures ranged between -0.13 US2005$/ ings, but are usually costly to society.
kWh (i.e., a significant net benefit) and 0.11 US2005$/kWh. Despite the
fact that economic performance of the policy instruments examined Voluntary instruments vary in effectiveness that depends, for example,
is presented in a variety of forms – i.e., economic cost or benefit per on the demand for energy-efficient products in the case of voluntary
unit energy saved, benefit-cost ratio, total amount of estimated sav- labeling and on whether the companies take voluntary commitments
ings, etc. – making comparative evaluation extremely difficult, it can be seriously. Though they have often failed to reach their goals, they can
generally stated that appliance standards, energy efficiency obligations be a good starting point for countries that are just introducing building
and quotas, utility demand-side management (DSM) programs, and tax energy efficiency policies or when mandatory measures are not possible.
exemptions were found to be the most cost-effective policy tools in Private sector commitments may be more effective where there is the
the sample, all achieving significant energy savings at negative costs clear prospect of regulation as an alternative, i.e., where they are in the
in several applications. Regarding effectiveness for energy saving over- context of negotiated agreements rather than purely voluntary. Finally,
all, appliance standards, building codes, labeling, utility DSM programs, information instruments can be effective, but have to be specifically tai-
and tax exemptions achieved the highest savings in the sample. More lored to the target group.
specifically, the implementation of building codes and tax exemptions
(investment tax credits) policies in the United States are the two single Identification of the most cost-effective instruments was much more dif-
policy instruments in the sample that have resulted in the maximum ficult because for some instruments, no quantitative information could
absolute energy savings, amounting to 174 TWh/yr each. be found. In the assessed sample, appliance standards, mandatory audits,
utility demand-side management programs, mandatory labeling, energy
When comparing the five different categories of measures, the collected efficiency obligations, energy performance contracting, cooperative pro-
case studies indicate that regulatory and control measures are probably curement, and tax exemptions seem to be the most cost-effective pol-
the most effective in terms of energy savings as well as the most cost- icy measures. Thus, the category of regulatory and control instruments is
effective category, at least in developed countries. They all achieved apparently also the most cost-effective one, in contrast to a generally pre-
ratings of high or medium according to both criteria, i.e., effectiveness vailing expectation that economic instruments are the most cost-effective
and cost-effectiveness. Measures that can be designed both as volun- (IPCC, 1995). These findings are partly confirmed by the MURE database.
tary and as mandatory, such as labeling or energy efficient public pro- Such results are specific to the building sector, and might be explained
curement policies, have been revealed as more effective when they are by considering which barriers specific policy instruments address and the
mandatory. The Mesures d’Utilisation Rationnelle de l’Energie (MURE) low sensitivity to prices of most non-intensive energy users.
database (MURE, 2007; 2008), which collects and evaluates ex-post
estimates of energy savings delivered by policies in the European Union Table 10.20 summarizes the major barriers and corresponding potential
member states and their neighbors, confirms the findings above. policy instruments to overcome them.
727
Table 10.19 | Comparative assessment of all policy instruments from a governmental standpoint.
728
Special
conditions for
Country/ Cost of energy
Energy reductions for Cost- success, major
Policyinstrument regions Effective-ness reduction for selected References
selected best practices effectiveness strengths and
examples best practices in US2005$
limitations,
co-benefits
729
Continued next page →
Table 10.19 | (cont.)
730
Special
conditions for
Country/ Cost of energy
Energy reductions for Cost- success, major
Policyinstrument regions Effective-ness reduction for selected References
selected best practices effectiveness strengths and
examples best practices in US2005$
limitations,
co-benefits
Country name abbreviations: DZA – Algeria, ARG – Argentina, AUS – Australia, AUT – Austria, BEL – Belgium, BRA – Brazil, USA/Cal – California, CAN – Canada, BC/CAN – British Columbia, CEE – Central and Eastern Europe,
CHN – China, CRI – Costa Rica, CZE – Czech Republic, DEU – Germany, DNK – Denmark, ECU – Ecuador, EGY – Egypt, EU – European Union, FIN – Finland, FRA – France, GHA – Ghana, HKG – Hong Kong, HUN – Hungary, IRL –
Ireland, ITA – Italy, JAM – Jamaica, JPN – Japan, KOR – Korea (South), MAR – Morocco, MEX – Mexico, NLD – Netherlands, NOR – Norway, NZL – New Zealand, PHL – Philippines, POL – Poland, ROU – Romania, ZAF – South Africa,
SGP – Singapore, SVK – Slovakia, SVN – Slovenia, CHE – Switzerland, SWE – Sweden, THA – Thailand, UK – United Kingdom (Great Britain and Northern Ireland), USA – United States.
1
The tool covers the commerce and the industry and the results are for both sectors.
731
Table 10.20 | Barriers to energy efficiency and policy instruments as remedies.
732
Barrier category Examples of barriers Instrument category Policy instruments as Remedies
Economic barriers Higher up-front costs for Regulatory-normative/ regulatory-informative Appliance standards, building codes, energy efficiency obligations, requiring the use of a technology or a building with specific
more efficient equipment / standards.
buildings; lack of access to Procurement regulations ensuring the purchase of energy efficient equipment.
financing; energy subsidies; DSM programs.
lack of internalization of Economic instruments Under EPC, ESCOs finance energy efficiency improvements (addressing the issues of high front-up costs as well the lack of access
environmental, health, and to financing) and are paid from the energy cost reductions achieved.
other external costs Cooperative procurement, which is used by big buyers to specify the energy efficient standards for the equipment they use.
Energy efficiency certificates.
Other risk-sharing/financing instruments like co-operation with banks/public-private partnerships, guarantee schemes.
Fiscal instruments Tax exemptions, subsidies/rebates/grants to reduce up-front costs.
Taxation and/or public benefit charges to increase energy prices and to internalize externalities.
Hidden costs/benefits Costs and risks due to Regulatory-normative Appliance standards and building codes, requiring the use of particularly technologies or solutions.
potential incompatibilities, Labelling for informing the public about product standards, etc., resulting in reducing transaction costs for seeking information.
transaction costs, etc. Economic instruments ESCOs can undertake a significant part of these hidden costs and risks.
Support action Public leadership programs to demonstrate new technologies and to gain experience from their implementation.
Information and advice programs.
Market imperfections Limitations of the typical Regulatory-normative/ regulatory/informative Appliance standards, building codes, energy efficiency obligations, imposing specific standards to buildings/equipment. A holistic
building design process; approach engaging engineers, architects, etc., from the early stages of the design process.
fragmented market structure; Mandatory labelling for informing the public about product standards.
landlord/tenant split and Procurement regulations and DSM programs.
misplaced incentives; Regular monitoring and evaluation of programs and implemented policies.
administrative and regulatory Economic instruments ESCOs can handle more effectively the administrative barriers for implementing energy conservation in buildings.
barriers (e.g., in the Energy efficiency certificates and Kyoto Flexibility mechanisms can create incentives for implementing energy conservations
incorporation of distributed measures.
generation technologies) Fiscal instruments Taxation and public benefit charges giving the right price signals.
Support, information, voluntary action Tax exemptions, subsidies/rebates/grants to accelerate first-movers.
Public leadership programs, awareness raising campaigns.Education programmes for builders, architects, engineers, etc.
Cultural/ behavioral barriers Tendency to ignore small Support, information, voluntary action Awareness raising through information campaigns.
opportunities for energy Detailed billing programmes, providing information to the final consumers as regards the most energy-requiring uses and
conservation, organizational equipment.
failures (e.g., internal Public leadership programs to demonstrate new technologies and practices.
split incentives); tradition, Voluntary agreements between governmental bodies and a business or organization, which undertakes the responsibility to
behavior, lack of awareness increase its energy efficiency.
and lifestyle; non-payment Voluntary labelling programmes.
and electricity theft. Fiscal instruments Taxation and/or public benefit charges to increase energy prices and to give the right signal in the market.
Regulatory-normative Appliance and equipment standards as well as other normative measures are a good way to overcome the tendency to ignore
small opportunities (cf. phasing out of incandescent bulbs).
Information barriers Imperfect information. Support, information, voluntary action Awareness raising through information campaigns.
Detailed billing programmes, providing information to the final consumers as regards the most energy-requiring uses/equipment.
Public leadership programs to demonstrate new technologies and practices.
Voluntary labelling programmes.
Regulatory-informative Mandatory labelling for informing the public about product standards.
Procurement regulations ensuring the purchase of energy efficient equipment.
DSM programs.
Mandatory audits.
Table 10.21 | Characteristic examples of possible policy instrument packages and examples of commonly applied combinations.
Measure Regulatory Instruments Information Instruments Financial /Fiscal Incentives Voluntary Agreements
Regulatory instruments Building codes and standards for Standards and information Building codes and subsidies Voluntary agreements with a threat
building equipment programs of regulation
Information instruments Appliance standards and labelling Labelling, campaigns, and retailer Labelling and subsidies Voluntary MEPS and labelling
training
Financial/Fiscal Incentives Appliance standards and subsidies Energy audits and subsidies Taxes and subsidies Technology procurement and
Labelling and tax exemptions subsidies
Voluntary Agreements Voluntary agreements with a threat Industrial agreements and energy Industrial agreements and tax
of regulation audits exemptions
10.8.3.1 Standards, Labeling, and Financial Incentives Appliance standards are often combined with labeling and rebates in
order to give incentives for investments beyond the level required by
There are several effective policy options available to accelerate the the minimum energy efficiency standard. McNeil et al. (2008) demon-
transformation of appliance markets toward higher efficiency, including strate the importance of implementing both energy efficiency labeling
MEPS (Minimal Energy Performance Standards), voluntary or mandatory and standards, showing that enforcing such policies on a global scale
consumer information labels, and publicity or rebate programs spon- would lead to worldwide savings of 1113 TWh/yr of electricity and 327
sored by utilities or government agencies. Appliance efficiency standard TWh/yr of fuels by 2020, and 3385 TWh/yr of electricity and 928 TWh/yr
and labeling programs have by now become a core part of energy effi- of fuels by 2030. In addition, rebates for the most energy-efficient prod-
ciency programs in many countries. ucts encourage consumers to buy these, which reinforces and sustains
market transformation.
Among the oldest and most comprehensive programs are the US fed-
eral MEPS program, the comparative labeling program implemented by The Japanese Top Runner approach is another unique and successful
the European Union, and the Energy Star endorsement label program, method to improve the energy efficiency of appliances (Murakoshi et
which is a program of the United States but has become widely rec- al., 2005). In the Top Runner approach, government sets target energy
ognized internationally. Minimum performance standards are used in efficiency values and years for appliances, including scope, based on
the European Union, as well as in developing countries such as China, the highest energy efficiency products on the market, and encourages
Tunisia, and Thailand. Appliance standards have been perhaps the most manufacturers to make products better than this target energy effi-
successful policy for improving energy efficiency, in part because they ciency value. Energy efficiency values and indicator labels are voluntar-
capture 100% of the market in a few years’ time (US DOE, 2008) and ily displayed in catalogs and other advertising and publicity material so
they remove key market barriers – such as lack of interest, incentives, that consumers can consider energy efficiency when making purchases.
etc. – and transaction costs. In addition, the Top Runner program sets fleet standards for appliances.
This system of voluntary agreements between the Japanese govern-
For office equipment, voluntary information programs have induced ment and manufacturers has been highly effective, leading Japan’s
manufacturers to improve efficiency (US EPA, 2007). The year 2007 appliance market to be among the most efficient in the world.
brought new Energy Star specifications for office and imaging equip-
ment. In addition to reducing power use of the products themselves, Building codes can also be combined successfully with voluntary or
the new specifications also set additional requirements for accessories. mandatory certification of buildings (IEA, 2010c) such as through rat-
If an imaging product is sold with an external power adapter, cordless ing systems like the British BREEAM,30 the Japanese CASBEE,31 and the
handset, or digital front-end, these accessories must meet Energy Star
External Power Supply, telephony, or computer specifications. These
requirements ensure that the Energy Star represents only the market’s 30 BREEAM (BRE Environmental Assessment Method) is a widely used environ-
most energy-efficient products. Energy Star-qualified office and imaging mental assessment method for buildings. It was developed by BRE (Building
products use 30–75% less electricity than standard equipment. Research) Trust Companies and covers a wide range of building types (www.
breeam.org/).
31 CASBEE (Comprehensive Assessment System for Built Environment Efficiency)
Due largely to the example set by the success of programs in the United is an assessment tool based on the environmental performance of buildings or
States, the European Union, and Japan, there has been a proliferation of urban area. CASBEE evaluates a building from the two viewpoints of environmen-
similar programs throughout the world in the past two decades. The num- tal quality and performance (Q=quality) and environmental load on the external
environment (L=load) and defines a new comprehensive assessment indicator, the
ber of programs exceeds 60 (Wiel and McMahon, 2005), and they cover Building Environmental Efficiency (BEE), by Q/L (www.ibec.or.jp/CASBEE/english/
dozens of different residential, commercial, and industrial products. index.htm).
733
Energy End-Use: Buildings Chapter 10
American LEED system.32 The European Union’s EPBD33 is actually an households from purchasing them. This implies that governments might
example of combining codes with certification. A number of developing consider incentive schemes for companies that undertake labeling.
countries, such as China, intend to introduce building rating schemes to
complement building codes (Ürge-Vorsatz and Koeppel, 2007). In the
United States, mandatory energy efficiency regulations are sometimes 10.8.4 Policy Instruments Addressing Selected Barriers
coupled with voluntary labels, such as ENERGY STAR, and tax credits to and Aspects Toward Improved Energy Efficiency
manufacturers and to consumers. This combination eliminates the least in Buildings
efficient products, while compensating manufacturers for some of the
increased production costs both through tax credits and through premi- 10.8.4.1 Policies for Retrofit
ums charged for ENERGY STAR designs.
While the majority of broad policy approaches – information, labeling,
standards, incentives, etc. – are in principle as applicable to building
10.8.3.2 Regulatory and Information Programs retrofit as new buildings, there are clearly important differences in
the policy measures required. In most countries, due to the long life-
Regulatory policy instruments are usually effective, but lack of enforce- time of buildings replacement rates of the building stock are low, and
ment can be a barrier and the rebound effect may result in some ben- therefore retrofit will be essential to achieving rapid progress in energy
efits being taken as increased service rather than reduced consumption. efficiency.
Awareness might improve compliance and help overcome the rebound
effect in more affluent population groups where energy service levels Securing low-energy retrofit activity raises some different issues. This
are not constrained. is partly because codes and standards are expected to deliver much
more in new construction. Retrofitting existing buildings is a discretion-
ary investment – no action is an option, and often an easier option.
10.8.3.3 Public Leadership Programs and Energy Performance Building owners and occupiers therefore need to be persuaded not only
Contracting (EPC) of the merits of energy investment, but to finance it and bear whatever
disruption it entails. Incentives may therefore need to be higher than for
By improving its own energy efficiency, the public sector can not only save new buildings. This sub-section therefore focuses upon the differences
costs, but also demonstrate to the private sector the potential and feasi- in policy mix that may be required for building retrofit.
bility of energy efficiency improvements and trigger market transform-
ation. EPC in the public sector is especially advantageous, as the budget The incentive policies reviewed above are particularly relevant to retro-
of many public administrations is limited. Executive orders that oblige fitting policies. In some cases, e.g., in the United Kingdom, there is sup-
public authorities to reduce energy use by 30% and the federal energy port for energy efficiency measures in low-income households from
management program in the United States, as well as the Energy Saving government-funded programs. More commonly energy efficiency retro-
Partnership in Berlin, Germany, have boosted the energy service company fits are supported through a variety of fiscal measures, including income
(ESCO) industry (Ürge-Vorsatz and Koeppel, 2007). However, significant tax credits – e.g., in the United States and France – and low rates of
barriers still hamper EPC in the public sector in developing countries. relevant sales taxes – e.g., reduced rate value added tax (VAT) in some
European Union countries. In some cases, these formed part of green
stimulus packages in 2009.
10.8.3.4 Financial Incentives and Labeling
Programs of financial support for building energy efficiency through
In order for financial incentives such as loans, subsidies, and tax credits energy utility regulation are increasingly common and growing in size.
to be most effective, the labeling of energy efficient products is neces- First known as Demand Side Planning or Integrated Resource Planning
sary, which ensures that only the most efficient categories of equip- and used in the United States in the 1980s in vertically integrated mon-
ment are financially supported (Menanteau, 2007). On the other hand, opoly utilities, they have now been adapted to a range of regulatory
labeling, particularly voluntary labeling alone, might not be effective environments. In principle, any category of energy efficiency may be
(Menanteau, 2007), because if the premium labeled products are sub- addressed in this way, but in practice building retrofits predominate. In
stantially more expensive, that discourages especially low-income some states of the United States and some European Union countries,
the United Kingdom, Italy and France, program savings approach or
32 LEED (The Leadership in Energy and Environmental Design) is a Green Building Rating exceed 1% of regulated energy use (e.g., York, 2008; Eyre et al., 2009).
System developed by the United States Green Building Council and providing a suite
of standards for environmentally sustainable construction (www.usgbc.org/).
Performance contracting by energy service companies is widely used in
33 EPBD (EU Directive on the Energy Performance of Buildings) is a range of provisions
aimed at improving energy performance of residential and non-residential buildings, many countries for the retrofitting of commercial buildings. Subsidized
both newly built and already existing (www.buildingsplatform.org/cms/). energy advice has been used widely to increase information on energy
734
Chapter 10 Energy End-Use: Buildings
efficiency opportunities in the existing building stock. These have been services expected by future occupants, when known. In general, these
linked to incentive schemes, which may be in the form of grants, loans, clients will have little energy knowledge and very little insight into the
tax incentives, or energy company incentive payments. challenge of low energy retrofits. Moreover, in the case of minor changes
and even major ones to small buildings, e.g., single-family dwellings,
An audit is generally recognized as the precursor to effective retrofit retrofit may frequently be done without the oversight of architects or
investment. The logic of this is reflected in policies that increasingly energy services professionals. In this environment, delivering the very
require mandatory labeling and audit and certification of buildings, e.g., low levels of air infiltration and thermal bridging implied by passive
European Performance of Buildings Directive. The first aim of such label- building standards involves some practical challenges for the retrofit
ing is to provide consumer information, but labeling schemes are also process. At the very least, the widespread adoption of low energy retro-
essential as a tool in incentive or regulatory policies that are linked to fit programs will also require a substantial program of training in the
building performance. building sector (Killip, 2008).
Although codes and standards are best known for use in new buildings,
they are increasingly used in retrofit. This can be to require perform- 10.8.4.2 Policies Addressing Non-compliance Related to
ance standards at the time of major refurbishment, and this applies in Building Codes
the European Union to buildings through the Energy Performance of
Buildings Directive. Standards are also applied to individual components Building codes have served as a major policy tool for reducing energy
in retrofit, e.g., heating, glazing, air conditioning, and this is very cost required, especially for building services such as heating, cooling,
effective (e.g., DEFRA, 2007b). Germany has extended this principle to water heating, and lighting (Listokin et al., 2004). Existing practices in
both fabric elements and whole building performance at the point of several countries show there are mainly two types of building codes:
major refurbishment (Dilmetz, 2009). However, to date there has been (1) overall performance-based codes requiring that a building’s pre-
very limited use of standards for whole building performance to require dicted energy demand or energy cost (usually determined through an
refurbishment, for example at the point of sale or rent. At present, actual energy modeling software), is equal to or lower than a baseline target
regulation of this type has probably been confined to a few parts of the that has been specified by the code; and (2) prescriptive codes, which
United States – San Francisco, Berkeley, Davis, Burlington, Ann Arbor, set separate energy performance levels for major envelope and equip-
and the state of Wisconsin (CLG, 2010). The adoption of mandatory ment components. A combination of an overall performance require-
labeling and retrofit codes (e.g., in Europe) in principle provides a basis ment with some component performance targets (e.g., wall insulation)
for wider use of this approach. is also possible.
It is increasingly recognized that substantial retrofit will be required Computer simulation tools have existed since the 1970s to calculate
if older buildings are to reach the energy efficiency standards implied the energy performance of buildings based upon their design, and
by the ambitious targets of many governments. Traditional incentive the results have been validated – or improved – by comparison with
mechanisms that support individual components will not be sufficient measured energy use. The full potential for energy savings from build-
to deliver the major changes in fabric, airtightness, and heating and ing codes has not been achieved, in part because compliance and
cooling system efficiency that are required. Policies that support very enforcement are not complete. The range of experiences is broad, from
substantial improvement are beginning to be explored. For example, jurisdictions where even the structural integrity of buildings may be
in Germany there are 100% low interest loans up to Euro 50,000 compromised – sometimes revealed when earthquakes cause wide-
(approximately US2005$59,000) for CO2 rehabilitation of buildings, sup- spread damage in a region – to buildings failing to meet fire codes, to
porting very low energy refurbishment (Schonborn, 2008). In Berkeley, buildings meeting some but not all requirements, to those meeting all
California, to encourage energy-efficient renovations of residential and requirements.
commercial buildings, the municipality provides funds that are to be
repaid within 20 years through property taxes (Fuller et al., 2009). Since Good statistics are lacking to quantify the problem globally. In many
the 2009 financial crisis, with lending significantly reduced, schemes of parts of the world, there are no legal requirements for building code
this type are of increasing importance for supporting retrofits. However, enforcement. Even in some of the most prosperous regions, the level
policies of this type are on hold in the United States because of concerns of resources available for enforcement, such as the number of local
that they infringe on contractual obligations to mortgage lenders. code enforcement officials or information and tools available to them,
is often inadequate. In some developed areas, code compliance has
Policies for retrofit to low energy standards also need to deal with prac- been shown to be about 50% (Usibelli, 1997). A recent California study
tical complexities inherent in the diversity of current buildings, many found rates of non-compliance by measure ranging from 28–73% for
already significantly altered since original construction and often poorly residential and 44–100% for non-residential. In both cases, the lowest
built, maintained, and documented. Retrofit has to deliver the range non-compliance was for lighting, and the highest was for ducts (Sami
of outcomes defined by building owners or managers and provide the Khawaja et al., 2008).
735
Energy End-Use: Buildings Chapter 10
While performance measurement, by means of commissioning or The adoption of behavior to use less energy by building occupants can
research on occupied buildings, may be necessary to rigorously compare be enhanced through information, advice, and educational programs
actual performance with the energy performance projected by computer and the provision of more detailed and direct feedback on energy use
models using design parameters, simpler inspections are sufficient to by end-use and energy expenditures. It has been noted that, in many
detect significant non-compliance. Failure to comply can occur because cases, people underestimate the amount of energy they use for specific
actual construction practice deviated from design, or inferior materials energy uses. To this end, detailed billing and disclosure programs have
or equipment were substituted, or installation was flawed or incom- been estimated to potentially save up to 20% of energy (Darby, 2000)
plete. Studies have suggested ways to improve building regulations (for and are mostly cost-effective (Ürge-Vorsatz et al., 2007).
a recent European example, see Garcia Casals, 2006).
However, better feedback to final consumers on energy use may increase
Aiming at enhancing the effectiveness of building codes, there has been costs and reduce revenues for the energy supplier. The policy implication
much discussion recently about a new energy code compliance frame- is that regulation is likely to be needed to set a minimum standard for
work based on actual post-construction energy performance outcomes the quality and frequency of energy use information. This could include
of buildings, called outcome-based building codes (Hewitt et al., 2010). frequency of meter reading and billing and requirements for compari-
In other words, owners would have the flexibility to pursue whichever son with historical data and consumption of similar users. The advent of
retrofit strategies they deem appropriate to their individual buildings, smart meters provides new opportunities to enhance information across
but would be required to actually achieve a pre-negotiated performance the energy supply chain, including to final users. Again, this needs a
target, demonstrated through mandatory annual reporting of energy clear regulatory framework to be successful, including timescales for
use. Although no current codes regulate actual energy use, outcome- deployment and standards for inter-operability, consumer information,
based codes may be a very critical tool toward deep energy savings in and data transfer.
existing buildings. As existing buildings do have an energy performance
history, benchmarking plays a vital role in establishing an outcome- Carefully designed and targeted awareness-raising programs to secure
based compliance path in energy codes (Denniston et al., 2010). An specific outcomes can have a place in policy packages to reduce energy
outcome-based performance path may be based on either requiring cer- use. The Japanese “Cool Biz” campaign is a good example (see Box
tain percent improvement in energy performance, assuming old energy 10.3). However, there is limited evidence that general exhortation, e.g.,
performance needs are known, or absolute performance goals, given advertising campaigns, has a significant lasting impact. Energy saving
sufficient data about building performance needs in order to establish information needs to be clear and relevant and provided at the point
those goals are available. of key decisions; product labeling is the best example of this. Advice
on energy saving opportunities is generally most effective when it is
Generally, successful building energy codes will likely require: (1) clear, specific to personal circumstances, especially when provided by trusted
consistent code documentation, that is as simple as possible; (2) pro- sources independently of energy companies and as part of policy pack-
viding sufficient information, training, and motivation to practitioners; ages including incentives and other support to act. Consumers are
(3) adequate local resources to check compliance, keeping in mind that unlikely to seek this out, or pay for it at cost, and therefore it needs to
the sheer size of the construction industry argues for simpler methods be provided as a public or community service, for example by local gov-
and sampling using statistical methods, rather than rigorous checking of ernment or specialist energy agencies.
every building; (4) feedback to architects, designers, builders, contractors,
and consumers to identify good and bad practice; (5) penalties for con- Energy pricing may also be a useful tool for influencing energy use
sistent bad practice; and (6) performance-based rating systems to close behavior in buildings. Furthermore, even if residential energy price elas-
the loop from actual performance back to design and construction. ticities are relatively low in high income countries, appropriate energy
pricing systems, e.g., with the adoption of staggered rates, may provide
impetus for a more rational use of energy sources in buildings (Reiss and
10.8.4.3 Policies Addressing Professional, Social, and White, 2008; National Action Plan for Energy Efficiency, 2009).
Behavioral Opportunities and Challenges
Finally, non-technological options to reduce energy use in new buildings
A substantial part of the huge energy conservation potential in build- related to architectural decisions at an early design stage, e.g., build-
ings requires the effective engagement of human dimensions of pro- ing shape, form, orientation, size, etc. (see Section 10.4.2), can be sup-
viding, adopting, and using energy efficient technologies and buildings. ported through appropriately designed building codes, regulations on
These are set out in Section 10.4.8 above. In many cases, these factors urban density, building heights, and the mix of land uses, etc. (WBCSD,
constitute significant barriers for capturing even low cost, energy con- 2008). These mechanisms already exist in many countries. However,
servation potential. To overcome these barriers, appropriately designed their effective implementation and particularly their revision to incorp-
policies or portfolios of policies can be implemented that are briefly orate energy efficiency aspects remain a challenge in most developing
described below. and in several developed countries.
736
Chapter 10 Energy End-Use: Buildings
25 While energy costs are a relatively small part of total occupancy costs,
Overall costs they can still be a significant factor in motivating energy efficiency
action. But profitable opportunities for energy savings are often over-
20
Energy cost looked because of inadequate cost information. Despite real estate
managers’ stated interest in energy efficiency, a study in 2006 found
that only two-thirds of companies tracked energy data and only 60%
Euro/m2/month
15
tracked energy costs (WBCSD, 2007).
Energy is typically a small proportion of total operating costs for build- 10.8.4.5 New Business Models – ESCOs
ings. For example, in a high quality office building in Germany, heating
and electricity made up less than 5% of the total running cost of the Appropriate commercial relationships can increase the focus on energy
building – about 1.1 out of every €23.3 (1.4 out of US2005$29.8) spent costs by altering commercial relationships, removing the split incentives
(see Figure 10.30). problem and introducing more effective incentives for reducing energy
use and costs.
Energy costs are more significant for direct investors. Energy efficiency is
part of the due diligence for the procurement of new properties by those An energy performance contract is an arrangement between a prop-
who will own and operate them. For other investors, energy costs are erty owner and an ESCO that covers both the financing and manage-
not important. There is emerging evidence that an energy-efficient build- ment of energy-related costs. It involves a variety of mechanisms to help
ing can command a premium. One US study (McGraw-Hill Construction, property owners use the knowledge of energy professionals to reduce
2006) found that professionals expect greener buildings to achieve an energy costs. While the effectiveness of ESCOs is well documented, mis-
average increase in value of 7.5% over comparable standard buildings, calculation of financial and technical risks has caused many failures of
together with a 6.6% improved return on investment. Average rents these firms.
were expected to be 3% higher.
ESCOs generally act as project developers, installers, and operators over
The insurance industry faces substantial risks from climate change. a seven–ten year time period. They assume the technical and perform-
Based on the consideration of those risks, many insurance companies ance risk associated with the project. The services offered are bundled
are providing incentives toward more energy efficient, and climate neu- into the project’s cost and are repaid through operational savings gen-
tral, buildings. Green insurance is not very common yet, and only exists erated, with the ESCO’s profit coming from a proportion of cost savings
in developed countries, but is gaining increasing significance. or a fixed fee based on projected energy savings.
737
Energy End-Use: Buildings Chapter 10
As an additional service in most contracts, the ESCO provides any spe- • ESCOs: utilities or other providers contract to achieve specified
cialized training needed so that the customer’s maintenance staff can energy performance for a commercial building and share the savings
take over at the end of the contract period. ESCOs have placed great with the owner.
emphasis on measurement and verification and have led the way to
verify, rather than estimate, energy savings. One of the most accurate • Energy performance contracting: schemes enabling energy services
means of measurement is the relatively new practice of metering, which companies or other players to offer innovative contracts guarantee-
is the direct tracking of energy savings according to sanctioned engin- ing the level of services and the energy savings to the customer, as
eering protocols. above.
Potential savings can be increased through commercial means. In some 10.8.4.7 Toward Low-energy and Zero-energy Buildings
countries, utility-charging practices may encourage waste because of
discounts for higher use – the unit rate typically declines above spe- Recently, several countries and organizations adopted ambitious goals
cified consumption levels. Reversing this practice would increase the with far-reaching implications regarding energy use in buildings. In
cost of energy at higher consumption levels. This is already the case in the United Kingdom, the government is already committed to all new
Japan, where the first 120kWh of monthly electricity consumption are housing being carbon neutral from 2016. In the United States, a num-
charged at JPY17.87/kWh (US¢18), increasing to JPY22.86 (US¢23) up ber of zero-energy initiatives have been adopted at the state level. For
to 300kWh and JPY24.13 (US¢24) above that level. A high feed-in tariff example, in California the zero-energy target has been specified for all
for renewable energy supplied to the grid may encourage investment new residential buildings by 2020 and for all new commercial buildings
in on-site renewable generation, as is already the case in countries like by 2030. Analogous targets have been adopted by several other coun-
Germany and France. tries, such as Denmark, France, the Netherlands, etc. Table 10.22 reviews
these ambitious targets and the related policies that have been adopted
WBCSD/EEB modeling has clearly shown that many potentially attract- by key countries to substantially reduce energy use in new buildings.
ive energy investments do not meet the short-term financial return cri-
teria of businesses, investors, and individuals. While significant savings Also, the recast of the European Union’s EPBD is stimulating Member
are possible with relatively modest investment premiums, a first-cost- States to develop frameworks – national plans, etc. – for higher mar-
sensitive buyer will never adopt transformative solutions. ket uptake of low- or zero-energy and carbon buildings. To this end,
Member States shall set specific targets for 2020 with respect to the
Solutions are to attract new sources of funding, learning from best prac- penetration of these buildings in relation to the total number of build-
tice and experience with business models such as ESCOs. Several oppor- ings and the total useful floor area.
tunities are available to open up finance for energy investment:
The WBCSD in the context of the Energy Efficiency in Buildings pro-
• Pay as you save: the first cost is financed in full or in part by an ject has adopted a vision in which all buildings in the world will con-
energy utility, which recoups the outlay through regular surcharges sume zero net energy by 2050. In addition, the buildings must also be
on the monthly bill; these surcharges attach to the house, not the aesthetically pleasing and meet other sustainability criteria, especially
specific customer. for air quality, water use, and economic viability (WBCSD, 2008). Also,
Architecture 2030, an independent nonprofit organization, proposed
the 2030 Challenge in 2006, tasking the global architecture and build-
34 Increasing access to capital requires a very different set of tools, such as preferential ing community to adopt a plan for making new buildings and major
rate loans, risk-guarantee mechanisms, or others. renovations carbon neutral by 2030. The plan sets an immediate energy
738
Table 10.22 | Examples of countries and regions which already adopted ambitious targets toward low-energy and zero-energy buildings.
Country /
Nature of target Explanation of the target Year of target Source Legal status of target
Region
UK Zero carbon homes1 All new houses built in the UK must be carbon neutral by 2016. 2016 Department for Communities and Local Government plan to be cast into law
Intermediate targets: carbon performance of new houses to be (with intermediate Government (2007) over time according to the interim
improved by 25% by 2010 and 44% by 2013, as compared to targets for 2010 and targets, until then not legally binding
2006 Building Regulations. 2013)
California Zero-net-energy All new residential construction will be zero-net-energy by 2020, 2020 (for all new California Public Utilities Commission Strategic goal, not legally binding
buildings2 while all new commercial construction will be zero-net-energy residential buildings) (CPUC), California Energy Efficiency
by 2030. 2030 (for all new Strategic Plan (2008)
commercial buildings)
Denmark Continuous reduction Maximum energy demand in new buildings must be, compared to 2010, 2015, 2020 Engelund Thomsen (2008), Danish Agreement among all major parties
of energy use in new the requirements3 of 2006: Government (2009) of Danish parliament in 2008,
buildings – 25% lower by 2010 confirmed by government strategy in
– 50% lower by 2015 2009, but not yet cast into law
– 75% lower by 2020
Austria Passive house standard4 Social housing subsidies5 shall only be granted for passive 2015 Engelund Thomsen et al. (2008), Goal of federal government, but not
buildings from 2015. Federal Ministry of Agriculture, Forestry, binding for federal states in charge
Environment and Water Management of implementation
(2007)
France Energy positive All new buildings must be energy positive from end of 2020. 2020 Assemblée Nationale (2008) Legislative process for binding law
buildings6 Intermediate target: maximum primary energy demand of 50 (with intermediate target ongoing as of May 2009
kWh/m2 for new tertiary buildings from end of 2010 and all new for 2010–2012)
buildings from end of 2012.
Germany Climate-neutral buildings All new buildings should use zero amount of primary energy by 2020 for new buildings; Ministry of Economics and Technology The targets set in the national
2020. 2050 for existing and Energy Concept. The supporting
Existing buildings should undergo efficiency renovation in buildings Ministry of Environment, Nature Laws, regulations, and other
2020–2050 to achieve a 80% reduction in their primary energy Conservation, and Nuclear Safety (2010) implementation documents are under
demand. discussion and development.
Hungary Zero carbon residential Granting building permits for residential and public buildings only 2025 Ministry of Environment and Water Strategic goal, not legally binding
and public buildings if they are carbon neutral. (2008)
The Netherlands Energy-neutral buildings7 All new buildings shall be energy neutral from 2020. The 2020 (with intermediate Engelund Thomsen et al. (2008), Government target, not yet cast
following intermediate targets apply: targets for 2011 and Ministry of Economic Affairs (2007), into law
– 2011: 25% improved energy performance8 compared to 2015) Ministry of Housing, Spatial Planning
regulations of 2007 and the Environment (2007)
– 2015: 50% improved energy performance compared to
regulations of 2007
1
Zero carbon means that a home should be zero carbon (net over the year) for all energy use in the home. This would include energy use from cooking, washing and electronic entertainment appliances as well as space heating,
cooling, ventilation, lighting and hot water.
2
CPUC defines zero-net-energy building as a building with a net energy use of zero over a typical year, i.e. the amount of energy provided by on-site renewable energy sources is equal to the amount of energy used by the building.
3
The minimum requirements for energy efficiency in buildings in Denmark as of April 1, 2006, are defined as follows: the total demand of supplied energy to a building to deal with heat losses, ventilation, cooling and domestic hot
water must not exceed 70 + 2200/A kWh/m2/a for residential and 95 + 2200/A kWh/m2/a for offices, schools, institutions and other buildings (A is the heated gross floor area).
4
Passive house standard is defined in Austria as annual heating energy use ≤15 kWh/m2, where the area refers to net area in Austria in general, but to the useful area in the federal state of Styria and to heated area in the federal
state of Tirol.
5
The share of social housing is high in Austria, this measure is therefore expected to have a great impact on market development for low-energy buildings.
6
Energy positive buildings are defined as buildings with a lower consumption of primary energy than the amount of energy they produce themselves from renewable sources.
8
Energy-neutral buildings are defined as not requiring any fossil fuel.
9
The Netherlands use an Energy Performance Coefficient to measure energy performance. In 2007, its maximum value for new residential buildings was 0.8. This will be lowered to 0.6 from 2011 and to 0.4 from 2015, which
739
roughly corresponds to passive house standard for heating.
Energy End-Use: Buildings Chapter 10
reduction target of 50% for all new buildings and major renovations and the MINERGIE standards in Switzerland was instrumental in the
compared to the regional or national average of each building type, strong development of low-energy buildings over the past decade.
with a goal of increasing this target by 10% every five years, reaching
100% by 2030. These goals have been adopted by several organizations, Lack of awareness and technical capabilities for constructing low-
including the American Institute of Architects, the United States Green energy and zero-energy buildings among practicing architects, engin-
Building Council, the Environmental Protection Agency, and ASHRAE eers, interior designers, and professionals in the building industry may
(Arens, 2008). be a major impediment to their development and the fulfillment of the
ambitious goals set. Consequently, the development of capacity build-
However, as mentioned earlier, zero-energy buildings may not be feas- ing programs to expand know-how is of particular importance. More
ible for every type of building and in all regions, and in many cases specifically, there is a significant need in most countries to create com-
their economics are unfavorable compared to high-efficiency buildings. prehensive, integrated programs at universities and other educational
They also may not be the most environmentally sustainable solution, as establishments to train current and future building professionals in the
compared to very high-efficiency buildings supplied with partially on- design and construction of low-energy buildings. Finally, the develop-
site renewable and zero-carbon grid energy. In fact, universal net zero- ment of pilot projects is helpful to demonstrate the effectiveness and
energy mandates may even have negative environmental consequences. the everyday functionality of the new buildings. In this context, the role
First, they may encourage urban sprawl, since net zero-energy buildings of the public sector as an early adopter is crucial.
are easier – or even technologically only feasible – to implement in
low-density, low-rise developments, but these increase transportation
energy use. Second, if limited budgets of investors and building owners 10.8.5 Energy conservation versus the rebound effect
are forced to be spent on relatively more expensive PV panels, larger
opportunities are foregone that would have been unlocked if the same Energy efficiency measures often have other, unintended effects on soci-
investments had been made into efficiency measures that might have ety. These ripple effects include rebound effects, co-benefits, and trade-
eliminated the need to produce more energy. offs with other resource use and pollution, and spillovers (Hertwich,
2005a). The rebound effect is defined first in Chapter 2, and discussed in
Nevertheless, in cases where zero-energy and very low-energy buildings detail in Chapter 22. Here it is reviewed with regard to building energy
are economically and environmentally justified, their promotion requires efficiency programs.
the implementation of a portfolio of policies that will motivate the sev-
eral stakeholders and the billions of building owners and occupants. There have been a large number of empirical and modeling studies
addressing the rebound effect (Greening et al., 2000; Schipper and
The adoption of stricter energy performance requirements is of particu- Grubb, 2000; Hertwich, 2005a; Sorrell, 2007). Empirical studies of the
lar importance. As an example, in the United Kingdom the tightening of micro-rebound effect consistently find that simple engineering-economic
local planning regulations and building codes will be the basic policy estimates of energy savings from an energy efficiency measure overesti-
instruments to achieve the carbon neutral target for all new buildings by mate the savings by 0–30% (Table 10.23), with some outliers in the
2016. Also, the adoption of stricter appliance and equipment standards case of energy poverty (Roy, 2000). When people cannot afford to heat
that are periodically updated will decrease the total electricity loads or cool their homes, but efficiency measures make these energy services
that should be compensated by on-site generation. affordable, these efficiency measures can in fact increase energy use. In
all cases, the “rebound” implies that consumers enjoy a higher level of
The implementation of economic incentives in the form of subsidies, tax energy service as a result of increased efficiency.
exemptions, etc., either for entire buildings, or for specific equipment
components, will improve the economic performance of low-energy With regard to macro effects, the main concern is that increased effi-
and zero-energy buildings and will accelerate the integration of renew- ciency leads to the substitution of energy services for other inputs to pro-
able or other efficient technologies in their design. As an example, in duction such as labor, capital, and land, alleviating resource constraints
France, new buildings respecting certain environmental criteria can be and thus enabling economic growth. Empirical studies show that the
exempted from property taxes for 15–30 years (European Commission, substitution effect does not lead to an increase in energy use for the
2009). There is some evidence that economic incentive programs are same basket of goods (Schipper and Grubb, 2000). As energy is usually
critical for preparing the market to adopt zero-energy goals in the pre- a small portion of the overall costs of a product or service, changes
sent (premature) phase (Arens, 2008). in the energy content of the product or service are unlikely to have a
substantial effect on demand. It can be observed, however, that energy
The adoption of preferably mandatory energy performance certification productivity has increased more slowly than labor productivity. Overall,
schemes and labeling programs will ensure compliance with energy the input of physical work has increased in lock-step with economic
code requirements and achievement of the targets set, thus enhancing output (Ayres and Warr, 2005), suggesting that increased efficiency
market value. In fact, development of the Passivhaus scheme in Germany of converting primary energy to physical work may have contributed
740
Chapter 10 Energy End-Use: Buildings
Table 10.23 | Rebound effect for energy efficiency measures for different energy and Pakistan. Several more plan to introduce building energy codes,
services.
including Morocco, Brazil, and Colombia (Janda, 2009), as well as Kenya
Energy service Rebound Region/study and Uganda, often supported by international organizations. The most
commonly applied measures are voluntary and mandatory labeling,
Residential space 10–30% Review USA (Greening et al.,
heating 2000) appliance standards, building codes, public leadership programs, DSM
10–30% (1.4–60%) Review OECD (Sorrell, 2007) programs, subsidies, grants and rebates, awareness-raising campaigns,
20–30% Austria (Haas and Biermayr, and mandatory audits. However, only very few evaluations of instru-
2000)
ments in these countries are available.
Residential space 0–50% Review USA (Greening et al.,
cooling 2000).
1–36% OECD (Sorrell, 2007)
57–70% S.Korea (Jin, 2007) 10.8.6.2 Enabling Factors: High Energy Price Levels and
Appliances 0 Austria (Haas, Biermayr et al., Energy Shortages
1998)
0 USA (Greening et al., 2000).
Increasing energy prices are often considered the most important pre-
Lighting 5–12% USA (Greening et al., 2000)
condition for improved energy efficiency in developing countries (Levine
200% India (Roy, 2000)
et al., 2007). Low, subsidized energy prices in many developing coun-
Automotive transport 0 Switzerland (de Haan et al., 2006)
10–30% USA (Greening et al., 2000) tries imply very long payback periods for energy efficiency investments,
5–26% USA (Small and Van Dender, which renders such projects unprofitable. The differences in energy
2005) prices explain why certain governments in the Mediterranean region,
10–30% (5–87%) Review global (Sorrell, 2007)
57–67% Germany (Frondel et al., 2008)
such as Tunisia and Morocco, are interested in energy efficiency while
others, especially oil-producing countries such as Algeria, are not or
are less interested. Revenues from lower energy price subsidies can
be rechanneled into rebates for energy efficient programs, loans, and
substantially to economic growth. Increased input of energy services in special assistance for low-income households to increase their energy
agriculture was essential both for raising yields and for freeing labor for efficiency and thereby reduce energy costs. Since policymakers often
work in industry (Erb et al., 2008). Empirical evidence for the importance consider energy efficiency a lower priority than more vital economic
of energy efficiency for economic growth, however, remains contested goals, such as poverty alleviation or increased employment, it is essen-
(Schipper and Grubb, 2000). The debate about how much energy effi- tial that non-energy benefits are well mapped, quantified, and well
ciency increases economic growth and thus demand for energy services understood by policymakers.
has yet to be resolved.
Taxes on energy or energy-related pollution or a cap and trade approach 10.8.6.3 Need For Technical Assistance and Training
have been identified as an effective way to counteract both micro-
rebound and macro-rebound effects because these effects are envisaged Sustainable construction know-how needs to be introduced into the
to operate through a price mechanism. The rebound effect, while limit- base curriculum of architects and other construction-related professions
ing the effectiveness of efficiency measures in reducing overall demand, all over the world. This is even more important in developing countries
provides additional economic welfare arguments for energy efficiency because of the often much more dynamic new construction rates. As
as necessary for overcoming energy poverty and as being potentially the training of a countries’ own nationals will take some time, technical
beneficial for economic growth. assistance through international organizations can bridge this gap for
a period. Even in Tunisia – which is often considered a best practice
developing country due to its successful energy efficiency policy in the
10.8.6 Focus on Developing Countries buildings sector (Ürge-Vorsatz and Koeppel, 2007) – representatives of
the energy efficiency agency request technical assistance for the devel-
10.8.6.1 Existing Policy Instruments in Developing Countries opment of thermal building standards due to a lack of national expertise
in this area (Ürge-Vorsatz and Koeppel, 2007).
A recent review of building energy codes (Janda, 2009) found that at
least 61 countries had energy codes for buildings in 2008 of which
the majority (40) were mandatory. The majority of these are devel- 10.8.6.4 Need For Demonstration Projects and Information
oped countries, but several developing countries are included in this
list: Mexico, Singapore, Vietnam, the United Arab Emirates, Jamaica, In addition to the lack of information and awareness, there are also
Jordan, Kazakhstan, Kuwait, Cote d’Ivoire, Thailand, India, China, Chile, human barriers – for instance, a lack of trust. Trust and awareness can
South Africa, Indonesia, Malaysia, the Philippines, Lebanon, Tunisia, be raised through pilot projects or demonstration projects in the public
741
Energy End-Use: Buildings Chapter 10
sector. Demonstration programs at all levels, from the capital city to 10.8.6.7 Importance of Monitoring and Evaluation
villages, such as the Green Buildings for Africa program in South Africa,
prove the advantages of energy efficiency to every citizen irrespective While many strategies to encourage or mandate energy efficient build-
of education level. ings or energy efficiency get introduced by government, many fail due
to the lack of proper implementation and monitoring mechanisms.
There is a major gap between political statements and actual action
10.8.6.5 Need For Financial Assistance or or changes in building design and construction. For instance, in India,
Funding Mechanisms while the government has initiatives to encourage integration of the
Energy Conservation Building Code with the National Building Code for
The higher first cost of energy efficient technologies may still hamper the uniform and larger adoption of the energy code, there is currently
penetration in developing countries, especially if the technologies must no concrete plan for the implementation of the code, or for monitoring
be imported. For example, high-performance glass is an expensive prop- and verification. Incentives, both financial and symbolic, are crucial for
osition in many countries, including India. Though it is proven to save the wider adoption of these programs.
energy, the higher first cost of about six-seven times that of the con-
ventional single glazing systems deters many users from investing in In many countries, baseline data on energy demand are missing. This
it. However, as the market grows, the industry is expected to achieve is problematic, since measuring the success of implemented policy
economies of scale and thus the cost of such technologies should be instruments requires knowledge of the baseline consumption. Regular
reduced. Tax breaks can provide an initial push toward energy efficient monitoring and evaluation of programs are necessary in order to adapt
technologies. Other financial mechanisms such as low interest loans the program, if possible, to changing circumstances and maximize its
from banks for energy efficient and renewable energy technologies are outcome. Evaluation studies quantifying energy savings are needed to
important, too. For example, in India, interest subsidy is available to buy determine cost-effectiveness and make necessary program adjustments
solar water heating systems. (Jannuzzi, 2005).
Many developing countries, such as Malaysia, Brazil, Morocco, and 10.8.6.9 Importance of Adaptation to Local Circumstances
partly Thailand, first introduced voluntary standards or voluntary label-
ing for appliances or buildings which are, however, often less effective Finally, although best practices and experiences can be shared and
than mandatory ones. Mandatory audits for public buildings and com- regional cooperation is useful, the success of programs depends, among
mercial sector buildings above a certain annual demand are a frequently other factors, on adaptation to the local economic, political, social, and
used instrument, applied, for example, in Tunisia and Thailand. However, cultural context. Many programs have already failed because they cop-
compliance is often difficult to achieve. In order to ensure enforcement, ied programs from other countries without taking into account differ-
special efforts are necessary, such as combining regulatory measures ences in culture, political systems, or other areas (Ürge-Vorsatz and
with incentives like subsidies or awards. Koeppel, 2007). Therefore, a thorough assessment of the local social,
742
Chapter 10 Energy End-Use: Buildings
economic, political, and cultural fabric as it affects the operation of from profits (WBCSD, 2008). For instance, in the United States, many
the policy instrument is important before decisions are taken. In large state restructuring laws and federal restructuring bills also include a
countries, the design of energy efficiency programs is most effective if mechanism for funding DSM initiatives, e.g., through an electricity
adjusted to different regional contexts and institutional realities, such surcharge, which does not discriminate among electricity suppliers
as the frailty of the regulatory certainty or the tendency of high contract and could result in some energy savings. The Consortium for Energy
failures. Moreover, the specificities of emerging economies – the social, Efficiency reports a doubling of total DSM expenditures by 88% of
legal, or economic context – can result in an increasing difficulty for the utilities in the United States from 2006 through 2009 (Nevius
customers in accessing capital. As it is, the higher rates of contractual et al., 2010). In many European countries, energy market reform has
failures in India or China, for instance, have resulted in investors find- been accompanied by the introduction of a formal regulatory sys-
ing it even more difficult to invest in energy efficiency projects (Taylor tem for the first time. In some cases the opportunity has been taken
et al., 2008). to introduce energy saving obligations on energy companies, using
“white certificates” or related mechanisms. In these countries, the
introduction of energy efficiency obligations in conjunction with mar-
10.8.7 Implications of Broader Policies on Energy ket restructuring has resulted in significantly increased activity on
Efficiency in Buildings energy efficiency by energy companies (Pavan, 2008; Lees, 2008; Eyre
et al., 2009).
10.8.7.1 Liberalization and Restructuring
of Electricity Markets The impact of energy market restructuring on energy efficiency is there-
fore dependent on the prior conditions and details of policy. The restruc-
Substantial literature exists on the impacts, both actual and estimated, turing of electricity markets may also lead to increased penetration of
of the liberalization and resulting restructuring of electricity markets on distributed generation, both in industrialized and developing countries.
energy use in final demand sectors and particularly in residential and More specifically, in a region with relatively high electricity prices stem-
commercial buildings. ming, for example, from expensive past investments, a customer can
avoid these expenses by operating a distributed generator (e.g., PV
A number of authors (Burtraw et al., 2000; Sondreal et al., 2001; Sevi, units, small wind mills, etc.).
2004; Pollitt, 2008) suggest that electricity restructuring results in lower
average prices for electricity, particularly in cases in which the regulated In developing countries, different patterns of current energy use and the
utilities were relatively inefficient. They point out that lower prices are relative unavailability of electricity distribution infrastructure will likely
likely to generate higher demand from consumers. However, as house- lead to very different effects of electricity restructuring than are likely
hold sector long run price elasticity is relatively low, energy market liber- in the developed world. The removal of subsidies that many developing
alization may have only a small effect on demand even if price reductions nations provide to energy use, as well as the diversification in the level
are quite substantial. Following liberalization, prices will not necessarily of service and pricing to reflect local actual costs, could lead to higher
fall in all areas, as price changes may start from different initial levels. If electricity prices in many cases, enhancing the attractiveness of invest-
the local regulated utility is a low cost supplier of electricity compared ments in rural electrification (Burtraw et al., 2000; Nagayama, 2008).
to its neighbors, then prices in the local area could actually rise under However, without an explicit effort, energy markets restructuring will
competition (Palmer, 1999; Sevi, 2004). Furthermore, the experience with result in decreased electricity accessibility to the poorer segments of the
retail competition in Massachusetts and Pennsylvania shows that large population (Dubash, 2003).
industrial and some medium-size customers are the likely beneficiaries of
lower prices, while the average price to residential and small commercial
customers is likely to rise over time (Sverrisson et al., 2003). 10.8.7.2 Energy Taxation and High Energy Prices
The restructuring of electricity markets is also expected to produce more Inevitably, higher end-use energy prices, while not addressing all the
widespread use of time-differentiated pricing of electricity. This form of market failures in the buildings sector, increase the energy conserva-
pricing will lead to a shifting of demand from peak to off-peak periods tion potential. However, the effect of price increases on energy demand
and will encourage building occupants to improve their energy-using depends on how sensitive demand is to energy price fluctuations. As
behavior. already pointed out, household sector long-term price elasticity is rela-
tively low, at least in developed economies, indicating that variability
Several studies also indicate that the trend in new utility-funded DSM in energy prices may have only a small effect on demand even if price
programs has been downward in the United States due to the deregu- increases are quite substantial. For example, in the Netherlands, short
lation of electricity markets (Eikeland, 1998; Palmer, 1999; Dubash, run price elasticity for electricity in households was estimated to be
2003; Sverrisson et al., 2003; Sevi, 2004; Blumstein et al., 2005) unless between 0 and -0.25, whereas the long run elasticity was estimated to
there is a regulatory environment that decouples sales of electricity be -0.3 to -0.45 (Berkhout et al., 2000). This is mainly attributable to the
743
Energy End-Use: Buildings Chapter 10
fact that in richer countries, energy prices are often a relatively insignifi- The situation regarding energy policies in developing countries clearly
cant cost component and therefore receive inadequate attention from requires further research. Only very few ex-post policy impact evaluation
building occupiers and owners (WBCSD, 2008). studies are currently available and even fewer include quantitative data
on effectiveness, cost-effectiveness. The cumulative effect of policy pack-
There is some evidence that energy use behavior may be seriously ages, incremental and double counting effects of policy tools, as well as
affected when a significant part of available income is spent on energy. synergy effects, are poorly understood. While the area of co-benefits or
Energy tends to be used carefully in developing countries, and this is ancillary benefits of energy efficiency in the buildings sector also needs
also true in richer countries during the last five years due to very high to be further explored, even less is known about ancillary costs, which
increases in international fuel prices. In the United States, high energy are seldom mentioned in literature. This relates to the better researched
prices over the last five years have stimulated energy saving initia- field of the obstacles or barriers to the deployment of energy efficiency in
tives. In 2007, two-thirds of United States homebuilders were planning the sector.
to build green in 15% of their projects, citing customer concern about
energy costs as the main reason (Kelleher, 2006).
10.10 Novelties in GEA’s Global Building
The increase of end-use energy prices through the imposition of energy Energy Assessment
taxes at some point in the energy supply chain may provide a second means
to energy efficiency through the investment of the tax revenues – or at least There have been several assessments completed recently on build-
part of them – in energy conservation related activities, such as mandatory ing-related opportunities for climate change mitigation or sustain-
DSM measures, subsidy schemes, green funds, or other mechanisms. able energy by various organizations. There are several new elements
in this chapter as compared to these earlier assessments. These
include:
10.9 Gaps in Knowledge
• An energy service-centered approach: the discussion and consider-
While buildings are ubiquitous and some aspects are well researched ation of opportunities recognizes that energy services are needed
and documented, such as the engineering aspects, there is surprisingly rather than energy per se, allowing for a broader spectrum of more
little understanding about their energy use and thus how problems innovative alternatives and solutions.
related to their energy demand can be mitigated – both at the micro
and macro levels. This section identifies a selection of important gaps in • Life cycle energy and emissions versus only operational ones: consid-
this knowledge, as considered important by the authors of this chapter. ering life cycle energy use and emissions when possible rather than
just the operational energy and emissions in buildings, and recog-
Perhaps the most glaring problem with the knowledge is the shortage of nizing the trade-offs. Novel policy recommendations originate from
related data and information. Little data exist on how energy in buildings applying such a perspective.
is concretely used and how it is broken down by end-uses, building types,
technologies, or other variables. Knowledge gaps exist about detailed • Applying a holistic, performance-based approach that recognizes
energy use by energy service. Another major knowledge gap pertains to that buildings are complex, integrated systems rather than sums of
region-specific costs of new buildings in relation to their energy perform- individual components.
ance and region-specific costs of retrofits of existing buildings in relation
to the savings in energy use achieved. Sufficient knowledge is also lack- • A novel global building energy use model using a performance-cen-
ing about best practices, that is, the most sustainable means for providing tered logic; presenting building thermal en pathways until 2050.
energy services in each developmental, cultural, and individual situation.
The interaction between life cycle energy use, environmental impacts, • The importance of the lock-in effect in the building sector has been
and cost aspects are also not well studied. Most of the published litera- shown for the first time, as well as detailed quantification of it.
ture on life cycle assessments of different building types is very recent
and the field is not yet very mature. Most engineering, environmental, • Large database on quantified or monetized co-benefits, illustrating
and economic assessments related to sustainability options for buildings the large orders of magnitude of such benefits.
rely on their direct energy use, costs, and emissions. However, considering
the entire life cycle would probably affect the validity of many decisions • A detailed assessment of non-technological opportunities and chal-
and policies, as there are often trade-offs. lenges, emphasizing human dimensions.
744
Chapter 10 Energy End-Use: Buildings
References Australian Greenhouse Office, 2005: When you keep measuring it, you know
even more about it! Projected impacts 2005–2020. National Appliance and
Equipment Program, Department of the Environment and Heritage, Australian
ACE, 2000: Energy Efficiency and Jobs. UK Issues and Case Studies. Report prepared Greenhouse Office, Commonwealth of Australia.
by the Association for the Conservation of Energy (ACE) for the Energy Saving Ayres, R. U. and B. Warr, 2005: Accounting for growth: the role of physical work.
Trust, London, UK. Structural Change and Economic Dynamics, 16(2): 181–209.
ACEEE, 2010: Panel 10 – Workforce Training. Proceedings of the ACEEE Summer Baker, N. and K. Steemers, 1999: Energy and Environment in Architecture: A
Study on Energy Efficiency in Buildings. American Council for an Energy-Efficient Technical Design Guide. E and FN Spon, London, UK.
Economy (ACEEE), Asilomar, CA. Balaras, C. A., 2001: Energy retrofit of a neoclassic office building: social aspects and
ADEME, 2009: Économies d’énergie, Faisons vite ça chauffe. Agence de lessons learned. ASHRAE Transactions, 107(1): 191–197.
l’Environnement et de la Maîtrise de l’Energie (ADEME), Paris, France. www. Banks, N., 2008: Implementation of Energy Performance Certificates in the Domestic
faisonsvite.fr/ (accessed March 15, 2011). Sector. UK Energy Research Centre (UKERC), Oxford, UK.
Aebischer, B., M. Jakob, G. Catenazzi, and G. Henderson, 2007: Impact of climate Bryan Christie, 2006: In Tools for better living: Smoke-free, Barkeman, E., Fortune.
change on thermal comfort, heating and cooling energy demand in Europe. In CNN Money.com. http://money.cnn.com/popups/2006/fortune/better_living/5.
Proceedings of the European Council for an Energy Efficient Economy (ECEEE) html (accessed December 31, 2010).
Summer Study 2007.Colle sur Loup, France. Barry, J.A., 2007: Watergy: Energy and Water Efficiency in Municipal Water Supply
AEC, 2002: Energy Design Brief: Building Integrated Photovoltaics. Architectural and Wastewater Treatment. Cost-Effective Savings of Water and Energy. The
Energy Corporation (AEC), Boulder, CO. www.archenergy.com (accessed Alliance to Save Energy, Washington, D.C.
December 16, 2010). Batlles, F. J., S. Rosiek, I. Muñoz, and A. R. Fernández-Alba, 2010: Environmental
Ahrestani, S., 2010: A multi-criteria site selection model for green roofs in the Sydney assessment of the CIESOL solar building after two years operation. Environmental
CBD: A GIS approach. Institute of Environmental Studies and Faculty of the Built Science and Technology, 44(9): 3587–3593.
Environment, University of New South Wales, Australia. Beccis, F., 2006: Energy efficiency targets using tradable certificates: microeconomic
Akbari, H., A. H. Rosenfeld, and H. Taha, 1990: Cooling urban heat islands. Proceedings aspects and lessons from Italy. Proceedings of the biennial international work-
of the Fourth Urban Forestry Conference. P. D. Rodbell (ed.) St. Louis, MO. shop – advances in energy studies. “Perspectives on Energy Future,” September
Akbari, H., S. Menon, and A. Rosenfeld, 2008: Global cooling: Increasing world- 14, Portovenere, Italy.
wide urban albedos to offset CO2. Climatic Change, 95(3–4): 275–286. Behrens, A. and C. Egenhofer, 2007: An initial assessment of policy options to
Allcott, H., 2010: Social Norms and Energy Conservation. Working Paper, June 9, 2010, reduce – and secure against – the costs of energy insecurity. Cost Assessment
Massachusetts Institute of Technology (MIT) and New York University (NYU). for Sustainable Energy Market. Centre for European Policy Studies, Unit for
Alliance to Save Energy, 2008: India: Manual for the Development of Municipal Climate Change and Energy, Brussels, Belgium.
Energy Efficiency Projects. The Alliance to Save Energy, Washington, DC. Bell, M. and R. Lowe, 2000: Building regulation and sustainable housing. Part 2:
Amstalden, R. W., M. Kost, C. Nathani, and D. M. Imboden, 2007: Economic technical issues. Structural Survey, 18(2): 77–88.
potential of energy-efficient retrofitting in the Swiss residential building sector: Bender, S., M. Moezzi, M. Gossard, and L. Lutzenhiser, 2004: Using mass media
the effects of policy instruments and energy price expectations. Energy Policy, to influence energy consumption behavior: California’s 2001 flex your power
35(3): 1819–1829. campaign as a case study. In Proceedings of the American Council for an Energy
Arens, E., 2008: Getting to zero: How CBE Industry Partners are meeting net-zero Efficient Economy (ACEEE), Summer Study, 2004.California Energy Commission,
energy goals. Centerline: Newsletter of the Center for the Built Environment at Sacramento, CA.
the University of California, Berkeley, CA, USA. Berkhout, P. H. G., J. C. Muskens, and J. W. Welthuijsen, 2000: Defining the
Argiriou, A. A., S. P. Lykoudis, C. A. Balaras, and D. N. Asimakopoulos, 2004: rebound effect. Energy Policy, 28(6–7): 425–432.
Experimental study of a earth-to-air heat exchanger coupled to a photovol- BERR, 2001: UK Fuel Poverty Strategy. Report prepared by the Department for
taic system. Journal of Solar Energy Engineering, 126(1): 620–625. Business Enterprise and Regulatory Reform (BERR), London, UK.
Armstrong, P. R., S. B. Leeb, and L. K. Norford, 2006: Control with building mass- Berrueta, V., R. Edwards, and O. R. Masera, 2008: Energy performance of wood-
Part II: Simulation. ASHRAE Transactions, 112(1): 462–473. burning cookstoves in Michoacan, Mexico. Renewable Energy, 33(5): 859–870.
Atif, M. R. and A. D. Galasiu, 2003: Energy performance of daylight-linked auto- Berry, L. and M. Schweitzer, 2003: Metaevaluation of National Weatherization
matic lighting control systems in large atrium spaces: report on two field-moni- Assistance: Program Based on State Studies 1993–2002. Oak Ridge National
tored case studies. Energy and Buildings, 35(5): 441–461. Laboratory report prepared for the US Department of Energy (US DOE), Oak
Aunan, K., H. Aaheim, and H. Seip, 2000: Reduced damage to health and envir- Ridge, TN, USA.
onment from energy saving in Hungary. In Proceedings of the IPCC Workshop Bertoldi, P. and C. Ciugudeanu, 2005: Five-Year Assessment of the European Green
on Assessing the Ancillary Benefits and Costs of Greenhouse Gas Mitigation Light Programme. Presentation at the 6th International Conference on Energy
Strategies. Washington, DC, USA. Efficient Lighting, 9–11 May, 2005, Shanghai, China.
Audenaert, A., S. H. de Cleyn and B. Vankerckhove, 2008: Economic analysis of Bertoldi, P. and S. Rezessy, 2006: Tradable certificates for energy savings (White
passive houses and low-energy houses compared with standard houses. Energy Certificates). Report prepared by the Joint Research Center of the European
Policy, 36(1): 47–5. Commission (ISPRA), Rome, Italy.
745
Energy End-Use: Buildings Chapter 10
Bertoldi, P. and S. Rezessy, 2007: Voluntary agreements for energy efficiency: review Bourassa, N., P. Haves, and J. Huang, 2002: A Computer Simulation Appraisal of
and results of European experiences. Energy and Environment, 18(1):37–73. Non-residential Low Energy Cooling Systems in California. In Proceedings of the
Bhattacharya, S. C. and M. A. Leon, 2004: Prospects for biomass gasifiers for cook- 2002 American Council for an Energy Efficient Economy (ACEEE) Summer Study
ing applications in Asia. Energy Field of Study, Asian Institute of Technology, on Energy Efficiency in Buildings, Vol. 3, Washington, DC, USA.
Bangkok, Thailand. Bourbia, F. and H. B. Awbi, 2004: Building cluster and shading in urban canyon for
Bickel, P. and R. Friedrich, 2005: ExternE. Externalities of energy.Methodology 2005 hot dry climate, part 1: air and surface temperature measurements. Renewable
update.Institut für Energiewirtschaft und Rationelle Energieanwendung (IER), Energy, 29(2): 249–262.
Universität Stuttgart, Germany. Directorate-General for Research, Sustainable Brandemuehl, M. and J. Braun, 1999: The Impact of Demand-Controlled and
Energy Systems, European Commission (EC), Luxembourg. Economizer Ventilation Strategies on Energy Use in Buildings. American Society
BioLite, 2009: Thermoelectrics in biomass stove systems. Presented at the “Cookstove of Heating, Refrigerating and Air-Conditioning Engineers Inc., Atlanta, GA, USA.
Workshop,” November 18, Asian Institute of Technology, Bangkok, Thailand. BRE, 2003: Energy Consumption Guide 19. Energy use in Offices. Report prepared
BioLite, 2011: Introducing the BioLite HomeStove. http://www.biolitestove.com/ by the Government’s Energy Efficiency Best Practice Programme (BRE), Watford,
HomeStove.html (accessed 19 September 2011). UK.
Blengini, G. A., and T. Di Carlo, 2010: Energy-saving policies and low-energy resi- Bressand, F., N. Zhou, and J. Lin, 2007: Energy use in commercial buildings in China
dential buildings: an LCA case study to support decision makers in Piedmont current situation and future scenarios. In Proceedings of the European Council
(Italy). International Journal of Life Cycle Assessment, 15(7): 652–665. for an Energy Efficient Economy(ECEEE) 2007 Summer Study – Saving Energy
Blondeau, P., M. Sperandio, and F. Allard, 1997: Night ventilation for building Just Do it! La Colle sur Loup, France, pp.1065–1071.
cooling in summer. Solar Energy, 61(5): 327–335. Brink, A. and M. Erlandsson, 2004: Energiskatternas effekt på energianvändningen
Blumstein C., C. Goldman, and G. Barbose, 2005: Who should administer energy- 1991–2001. Rapport till Energimyndigheten. [In Swedish: Energy taxes effect
efficiency programs? Energy Policy, 33(8): 1053–1067. on energy consumption 1991–2001. Report to the Swedish Energy Agency],
Boardman, B., S. Darby, G. Killip, M. Hinnells, C. N. Jardine, J. Palmer, and Stockholm, Sweden.
G. Sinden, 2005: 40% House. Environmental Change Institute, University of Brophy, V., J.P. Clinch, F. J. Convery, J. D. Healy, C. King, and J. O. Lewis, 1999:
Oxford, UK. Homes for the 21st Century – the Costs and Benefits of Comfortable Housing for
Boardman, B., 2010: Fixing Fuel Poverty. Challenges and Solutions. Earthscan, Ireland. Report prepared for Energy Action Ltd. by the Energy Research Group
London, UK. and Environmental Institute, University College Dublin, Dublin, Ireland.
Bodart, M. and A. De Herde, 2002: Global energy savings in office buildings by the Brounen, D. and N. Kok, 2010: On the Economics of EU Energy Labels in the
use of daylighting. Energy and Buildings, 34(5): 421–429. Housing Market. RICS Research, Erasmus University and Maastricht University,
Bohne, R. A., H. Brattebo, and H. Bergsdal, 2008: Dynamic eco-efficiency projec- the Netherlands.
tions for construction and demolition waste recycling strategies at the city level. Brown, M., 2001: Market failures and barriers as a basis for clear energy policies.
Journal of Industrial Ecology, 12(1): 52–68. Energy Policy, 29(14): 1197–1207.
Boonstra, C., I. Thijssen, and R. Vollebregt, 1997: Glazed Balconies in Building Brown, M., J. Chandler, M.V. Lapsa, and B. K. Sovacol, 2008: Lock-in: Barriers
Renovation. James and James, London, UK. to Deploying Climate Change Mitigation Technologies, Oak Ridge National
Borg, N., Y. Blume, S. Thomas, W. Irrek, H. Faninger-Lund, P. Lund, and A. Pindar, Laboratory ORNL/TM-2007–124 (revised November, 2008), Oak Ridge, TN.
2003: Harnessing the Power of the Public Purse. Final report from the European Brown, M., J. Chandler, M. V. Lapsa, and M. Ally, 2009: Making Buildings Part of
PROST study on energy efficiency in the public sector, Stockholm, Sweden. the Climate Solution: Policy Options to Promote Energy Efficiency. Oak Ridge
Borg, N., Y. Blume, S. Thomas, W. Irrek, H. Faninger-Lund, P. Lund, and A. Pindar, National Laboratory, TN.
2006: Release the power of the public purse. Energy Policy, 34(2): 238–250. Brulez, D. and R. Rauch, 1998: Energy Conservation Legislation in Thailand:
Borjesson, P. and L. Gustavsson, 2000: Greenhouse gas balances in building con- Concepts, Procedures and Challenges. In Compendium on Energy Conservation
struction: wood versus concrete from life-cycle and forest land-use perspectives. Legislation in Countries of the Asia and Pacific Region. United Nations Economic
Energy Policy, 28(9): 575–588. and Social Commission for Asia and the Pacific (UNESCAP), Bangkok, Thailand.
Bornehag, C. G., J. Sundell, C. J. Weschler, T. Sigsgaard, B. Lundgren, M. Brunklaus, B., C. Thormark, and H. Baumann, 2010: Illustrating limitations of
Hasselgren, and L. Hägerhed-Engman, 2004: The association between energy studies of buildings with LCA and actor analysis. Building Research and
asthma and allergic symptoms in children and phthalates in house dust: a nested Information, 38(3): 265–279.
case control study. Environmental Health Perspectives, 112(14): 1393–1397. Bureau of Energy Efficiency, 2009:Official website of the Bureau of Energy
Bornstein, R. and Q. Lin, 1999: Urban Convergence Zone Influences on Convective Efficiency (BEE). Ministry of Power, Government of India, New Delhi.
Storms and Air Quality. Proceedings of the WMO International Conference, Burgess, J., 2003: Sustainable consumption: is it really achievable? Consumer Policy
Congress of Biometeorology and International Conference on Urban Climate, Review, 13(3): 78–84.
World Meteorology Organisation (WMO), Sydney, Australia. Burtraw, D., K. Palmer, and M. Heintzelman, 2000: Electricity restructuring:
Borsani, C. and M. Salvi, 2003: Analysebericht zum Minergie-Standard. Memorandum Consequences and Opportunities for the Environment, Resources for the Future,
of Züricher Kantonalbank (ZKB) to CEPE-Team. Zurich, Switzerland. Discussion paper 00–39, Washington, D.C.
Bottrill, C., 2007: Internet Tools for Behaviour Change. Proceedings of the European Busch, J.F., 1992:A tale of two populations: thermal comfort in air-conditioned and nat-
Council for an Energy Efficient Economy (ECEEE), June 4–9, Cote d’Azur, France. urally ventilated offices in Thailand. Energy and Buildings, 18(3–4):235–249.
746
Chapter 10 Energy End-Use: Buildings
Buzar, S., 2007: Energy Poverty in Eastern Europe: Hidden Geographies of Deprivation. Crawford, R. H. and G. J. Treloar, 2004: Net energy analysis of solar and conven-
Ashgate Publishing Group, Aldershot, UK. tional domestic hot water systems in Melbourne, Australia. Solar Energy, 76(1–
Çakmanus, I., 2007: Renovation of existing office buildings in regard to energy 3): 159–163.
economy: an example from Ankara, Turkey. Building and Environment, 42(3): Crossley, D., M. Maloney, and G. Watt, 2000: Developing Mechanisms for
1348–1357. Promoting Demand-side Management and Energy Efficiency in Changing
Carbon Trust, 2005: The UK Climate Change Programme: Potential Evolution for Electricity Businesses. Research report 3, task 6 of the International Energy
Business and the Public Sector. Technical report prepared by Carbon Trust, Agency (IEA) Demand-side Management Programme, Energy Futures Australia
London, UK. Pty Ltd., New South Wales, Australia.
Cartalsi C., A. Synodinou, M. Proedrou, A. Tsangrassoulis and M. Santamouris, Cullen, J. M. and J. M. Allwood, 2009: The role of washing machines in life cycle
2001: Modifications in energy demand in urban areas as a result of climate assessment studies. Journal of Industrial Ecology, 13(1): 27–37.
change: an assessment for the southeast Mediterranean region. Energy da Graça, G. C., Q. Chen, L. R.Glicksman and L.K. Norfold, 2002: Simulation of
Conversion and Management, 42(14) pp.1647–1656. wind-driven ventilative cooling systems for an apartment building in Beijing and
CEA, 1995: Supporting Research and Development to Promote Economic Growth: The Shanghai. Energy and Buildings, 34:1–11.
Federal Government’s Role. Council of Economic Advisers (CEA), Washington, Darby, S., 2000: Making it obvious: designing feedback into energy consumption.
D.C. In Effective Advice. Boardman and S. Darby (eds.), Appendix 4, Environmental
Cebon, P. B., 1992: Twixt cup and lip: organizational behavior, technical prediction, Change Institute, University of Oxford, UK.
and conservation practice. Energy Policy, 20(9): 802–814. Darby, S., 2003: Making Sense of Energy Advice. In Proceedings of the European
Cedar, J., 2009: Thermoelectrics in Biomass Stove Systems. Presented at “Cookstove Council for an Energy Efficient Economy (ECEEE) Summer Study. Stockholm,
Workshop.” Asian Institute of Technology, November 18, Bangkok, Thailand. Sweden.
CERES, 2009: From Risk to Opportunity: Insurer responses to Climate Change, Report Darby, S., 2006a: The Effectiveness of Feedback on Energy Consumption. A review
prepared by CERES, 2009. for the Department for Environment Food and Rural Affairs (DEFRA) of the lit-
Chakravarty, S., A. Chikkatur, H. de Coninck, S. Pacala, R. Socolow, and M. erature on metering, billing and direct displays. Environmental Change Institute,
Tavoni, 2009: Sharing global CO2 emission reductions among one billion high University of Oxford, UK.
emitters. In Proceedings of the National Academy of Sciences of the United Darby, S., 2006b: Social learning, household energy practice and public policy: les-
States of America, 106(29): pp.11884–11888. sons from an energy-conscious village. Energy Policy, 34: 2929–2940.
Chapman, R., P. Howden-Chapman, H. Viggers, D. O’Dea, and M. Kennedy, Darby, S., 2008: Energy feedback in buildings: improving the infrastructure for
2009: Retrofitting houses with insulation: a cost–benefit analysis of a ran- demand reduction. Building Research and Information, 36(5): 499–508.
domised community trial. Journal of Epidemiology and Community Health, Dascalaki, E. and M. Santamouris, 2002: On the potential of retrofitting scenarios
63(4): 271–277. for offices. Building and Environment, 37(6): 557–567.
Claridge, D. E., M. Liu, S. Deng, W. D. Turner, J. S. Haberl, S. U. Lee, M. Abbas, Davie, G. S., M. G. Baker, S. Hales and J. B. Carlin, 2007: Trends and determinants
and H. Bruner, 2001: Cutting heating and cooling use almost in half with- of excess winter mortality in New Zealand: 1980 to 2000. BMC Public Health,
out capital expenditure in a previously retrofit building. In Proceedings of the 7:263.
European Council for an Energy Efficient Economy (ECEEE), Summer 2001, 4: Davis, D. L., A. Krupnick, and G. McGlynn, 2000: Ancillary benefits and cost of
74–85. greenhouse gas mitigation: an overview. In Proceedings of Workshop on
CLG, 2010: Residential Energy Conservation Ordinance Factsheet. Prepared by Assessing the Ancillary Benefits and Costs of Greenhouse Gas Mitigation
Climate Leaders Group (CLG). Strategies, March 27–29, 2000, Washington, DC, USA.
Clinch, J. P. and J. D. Healy, 1999: Housing Standards and Excess Winter Mortality de Dear, R. J. and G. S. Brager, 1998: Developing an adaptive model of thermal
in Ireland. Environmental Studies Research Series Working Paper 99/02, comfort and preference. ASHRAE Transactions, 104(1A):145–167.
Department of Environmental Studies, University College Dublin, Ireland. de Dear, R. J. and G. S. Brager, 2002: Thermal comfort in naturally ventilated build-
Clinch, J. P. and J. D. Healy, 2001: Cost-benefit analysis of domestic energy effi- ings: revisions to ASHRAE Standard 55. Energy and Buildings, 34(6):549–561.
ciency. Energy Policy, 29(2): 113–124. de Garbino, J. P., 2004: Children’s health and the environment. A global perspec-
Cooremans, C., 2007: Strategic Fit of Energy Efficiency (Strategic and cultural dimen- tive. A resource manual for the health sector. World Health Organization (WHO),
sions of energy-efficiency investments).In Proceedings of the European Council Geneva, Switzerland.
for an Energy-Efficient Economy (ECEEE) Summer Study, June 4–9, 2007, la Colle de Haan, P., M. G. Mueller, and A. Peters, 2006: Does the hybrid Toyota Prius lead
Sur Loop, France. to rebound effects? Analysis of size and number of cars previously owned by
Costanza, R., R. d’Arge, R. de Groot, S. Farber, M. Grasso, B. Hannon, K. Limburg, Swiss Prius buyers. Ecological Economics, 58(3): 592–605.
S. Naeem, R. V. O’Neill, J. Paruelo, R. G. Raskin, P. Sutton, and M. van den de T’Serclaes, P., 2007: Financing Energy Efficient Home. Existing Policy Responses
Belt, 1997: The value of the world’s ecosystem services and natural capital. to Financial Barriers. Organization for Economic Co-operation and Development/
Nature, 387: 253–260. International Energy Agency (OECD/IEA), Paris, France.
Cottrell, J., 2004: Ecotaxes in Germany and the United Kingdom – A Business View. DECC, 2009: Annual Report on Fuel Poverty Statistics 2009. Department of Energy
Green Budget Germany Conference Report, Berlin, Germany. and Climate Change (DECC), London, UK.
747
Energy End-Use: Buildings Chapter 10
DeCanio, S. J. and W. E. Watkins, 1998: Investment In Energy Efficiency: Do the emissions. In Proceedings of the National Academy of Sciences of the United
Characteristics of Firms Matter? The Review of Economics and Statistics, 80(1): States of America (PNAS), 106(44): 18452–18456.
95–107. Dilmetz, K., 2009: Energy Efficiency for Buildings. Presentation for German American
DEFRA, 2004: Valuation of Health Benefits Associated with Reductions in Air Chamber of Commerce of the Southern United States, Inc. (GACC South),
Pollution. Department for Environment, Food and Rural Affairs (DEFRA), London, Houston, TX.
UK. Dobson, J. and J. Griffin, 1992: Conservation effect of immediate electricity cost
DEFRA, 2005: Fuel Poverty Monitoring: Energy Company Schemes 2003. Annex to feedback on residential consumption behavior. In Proceedings of American
UK fuel Poverty Strategy, 3rd Annual Progress Report 2005,Department for Council for an Energy-Efficient Economy (ACEEE) 1992 Summer Study on Energy
Environment, Food and Rural Affairs (DEFRA), London, UK. Efficiency in Buildings10, Pacific Grove, CA, pp.33–35.
DEFRA, 2006b: Review and Development of Carbon Abatement Curves for Available Dodoo, A., L. Gustavsson, and R. Sathre, 2010: Life cycle primary energy implica-
Technologies as Part of the Energy Efficiency Innovation Review. Department tion of retrofitting a wood-framed apartment building to passive house stand-
for Environment, Food and Rural Affairs (DEFRA), ENVIROS Consulting, Ltd., ard. Resources, Conservation and Recycling, 54(12): 1152–1160.
London, UK. DSDNI, 2008: Ending fuel Poverty: A Strategy for Northern Ireland. Department for
DEFRA, 2006c: Synthesis of Climate Change Policy Evaluations. Department for Social Development in Northern Ireland (DSDNI), Belfast, Northern Ireland.
Environment, Food and Rural Affairs (DEFRA), London, UK. Dubash, N. K., 2003: Revisiting electricity reform: the case for a sustainable develop-
DEFRA, 2007a: Climate Change Agreements: Results of the Third Target Period ment approach. Utilities Policy,11: 143–154.
Assessment. Department for Environment, Food and Rural Affairs (DEFRA), Durkin, T., 2006: Boiler system efficiencies. ASHRAE, 48(51–57): 42–43.
London, UK. Dutta, S., I. H. Rehman, P. Malhotra, and V. P. Ramana, 1997: Biogas, the Indian
DEFRA, 2007b: Energy Efficiency Action Plan. Report prepared by the Department for NGO Experience. A FPRO-CHF Network Program, New Delhi, India.
Environment, Food and Rural Affairs (DEFRA), London, UK. EC, 1995: ExternE – Externalities of Energy. Vol. 2: Methodology, EUR 16521.
DEFRA/BERR, 2008: The UK Fuel Poverty Strategy 6th Annual Progress Report. European Commission (EC), Office for Official Publications of the European
Department for Environment, Food and Rural Affairs (DEFRA) / Department of Communities, Luxembourg.
Business Enterprise & Regulatory Reform (BERR), London, UK. EC, 2009: Low Energy Buildings in Europe: Current State of Play, Definitions and Best
DEG, 2004: Development of an Improved Two-Stage Evaporative Cooling System. Practice. Info note, European Commission (EC), Brussels, Belgium.
Davis Energy Group, California Energy Commission Report P500–04–016, St. ECCJ (Energy Conservation Center, Japan), 2008: Energy saving appliance cata-
Davis, CA. log. http://www.eccj.or.jp/index.html.
Demirbilek, F. N., U. G. Yalçiner, M. N. Inanici, A. Ecevit, and O. S. Demirbilek, ECCP, 2001: Long Report. European Climate Change Program (ECCP), Brussels,
2000: Energy conscious dwelling design for Ankara. Building and Environment, Belgium.
35: 33–40. ECCP, 2003: Can We Meet Our Kyoto Targets?2nd European Climate Change
Den Baars, S., 2008: Energy efficient white LEDs for sustainable solid-state light- Programme Progress Report, European Climate Change Program (ECCP),
ing, In Physics of Sustainable Energy, Using Energy Efficiently and Producing Brussels, Belgium.
it Renewably, D. Hafemeister, B. G. Levi, M. D. Levine and P. Schwartz (eds), Ecofys, 2001: Economic Evaluation of Sectoral Emission Reduction Objectives for
American Institute of Physics, Melville, NY. Climate Change. Top-down Analysis of Greenhouse Gas Emission Reduction
Denniston, S., L. Dunn, J. Antonoff, and R. DiNola, 2010: Toward a future model Possibilities in the EU. Contribution to a study for DG Environment, European
energy code for existing and historic buildings. In Proceedings of the American Commission by Ecofys Energy and Environment, AEA Technology Environment
Council for an Energy-Efficient Economy (ACEEE) Summer Study on Energy and National Technical University of Athens, Greece.
Efficiency in Buildings, Pacific Grove, CA. ECS, 2002: Fiscal Policies for Improving Energy Efficiency. Taxation, Grants and
Deringer, J., M. Iyer, and Yu Joe Huang, 2004: Transferred Just on Paper? Why Subsidies. Energy Charter Secretariat (ECS), Brussels, Belgium.
Doesn’t the Reality of Transferring/Adapting Energy Efficiency Codes and EEA, 2006: Air Quality and Ancillary Benefits of Climate Change Policies.
Standards Come Close to the Potential? In Proceedings of the 2004 American European Environment Agency (EEA), Technical Report 4/2006, Copenhagen,
Council for an Energy-Efficient Economy (ACEEE) Summer Study on Energy Denmark.
Efficiency in Buildings. August 2004, Pacific Grove, CA. Efficiency Vermont, 2009: For My Home. Vermont Energy Investment Corporation:
DEWHA, 2008: Energy Use in the Australian Residential Sector 1986–2020. Part 1. Burlington, VT. www.efficiencyvermont.com/for_my_home.aspx (accessed
Report prepared by Energy Efficient Strategies, Department of Environment, March 15, 2011).
Water, Heritage and the Arts (DEWHA), Canberra, Australia. Eichholtz, P., N. Kok, and J. Quigley, 2009: Why Do Companies Rent Green? Real
Dharmadhikari, S., D. Pons, and F. Principaud, 2000: Contribution of stratified Property and Corporate Social Responsibility. Energy Policy and Economics,
thermal storage to cost-effective trigeneration project. ASHRAE Transactions, University of California Energy Institute, Berkeley, CA, USA.
106(2): 912–919. Eicker, U., M. Huber, P. Seeberger, and C. Vorschulze, 2006: Limits and poten-
Dias, R., C. Mattos, and J. Balesieri, 2004: Energy education: breaking up the tials of office building climatisation with ambient air. Energy and Buildings, 38:
rational energy use barriers. Energy Policy, 32(11): 1339–1347. 574–581.
Dietz, T., G. T. Gardner, J. Gilligan, P.C. Stern, and M.P. Vandenbergh, 2009: Eiffert, P., 2003: Guidelines for the Economic Evaluation of Building-
Household actions can provide a behavioral wedge to rapidly reduce US carbon Integrated Photovoltaic Power Systems. International Energy Agency PVPS
748
Chapter 10 Energy End-Use: Buildings
Task 7: Photovoltaic Power Systems in the Built Environment, Technical Ford, B., N. Patel, P. Zaveri, and M. Hewitt, 1998: Cooling without air conditioning:
Report NREL/TP-550–31977, National Renewable Energy Laboratory, The Torrent Research Centre, Ahmedabad, India. Renewable Energy, 15: 177–182.
Golden, CO. Francisco, P. W., L. Palmiter, and B. Davis, 1998: Modeling the thermal distribution
Eikeland, P. O., 1998: Electricity market liberalization and environmental perform- efficiency of ducts: comparisons to measured results. Energy and Buildings,28:
ance: Norway and the UK. Energy Policy, 26(12): 91–927. 287–297.
Enerdata, 2009:Global Energy Intelligence. Database:www.enerdata.net (accessed1 Frank, T., 2005: Climate change impacts on building heating and cooling energy
September, 2009) demand in Switzerland. Energy and Buildings, 37: 1175–1185.
Evander, A., G. Sieböck, and L. Neij, 2004: Diffusion and Development of New Fridley, D. and J. Lin, 2004: Potential Carbon Impact of Promoting Energy Star in
Energy Technologies: Lessons Learned in View of Renewable Energy and Energy China and Other Countries. Lawrence Berkeley National Laboratory (LBNL),
Efficiency End-use Projects in Developing Countries. Report 2004: 2, International Berkeley, USA.
Institute for Industrial Environmental Economics, Lund University, Sweden. Friel, S. 2007. Housing, fuel poverty and health: A Pan-European analysis (book
Energy Data and Modeling Center, 2008: Handbook of Energy and Economic review). Health Sociology Review, 16(2): 195–196.
Statistics in Japan. The Energy Conservation Centre, Japan. Frondel, M., J. Peters, and C. Vance, 2008: Identifying the rebound: evidence from
Energywatch, 2005: Get Smart: Bring Meters into the 21st Century. Energywatch, a German household panel. Energy Journal, 29(4): 145–163.
July 2005. www.energywatch.org.uk/uploads/Smart_meters.pdf (accessed May Fujino, J., G. Hibino, T. Ehara, Y. Matsuoka, M. Yuzuru, K. Toshihiko, and
30, 2011). M. Kainuma, 2008: Back-casting analysis for 70% emission reduction in Japan
EST, 2009: Easy Ways to Stop Wasting Energy. Energy Saving Trust (EST): London, by 2050. Climate Policy, 8: S108-S124.
UK. www.energysavingtrust.org.uk/Easy-ways-to-stop-wasting-energy/Stop- Fülöp, O., 2009: Ösztönzött pazarlás – Lakossági energiaárak állami támogatása
wasting-energy-and-cut-your-bills/Tips-to-help-you-stop-wasting-energy/ 2003–2009. Összefoglaló elemzés. Energia Klub, Budapest, Hungary.
Getting-started (accessed March 15, 2011). Fuller, Merrian C., S. Compagni Portis, and D. M. Kammen, 2009:Toward a low-carbon
Erb, K. H., S. Gingrich, F. Krausmann, and H. Haberl, 2008: Industrialization, fossil economy: municipal financing for energy efficiency and solar power. Environment
fuels, and the transformation of land use. Journal of Industrial Ecology, 12(5–6): Science and Policy for Sustainable Development. January-February 2009. www.
686–703. environmentmagazine.org/Archives/Back%20Issues/January-February%202009/
Eurowinter Group,1997: Cold exposure and winter mortality from ischaemic heart FullerPortisKammen-full.html (accessed May 31, 2011).
disease, cerebrovascular disease, respiratory disease, and all causes in warm and Gadgil, A., S. Al-Beaini, M. Benhabib, S. Engelage, and A. Langton, 2007:
cold regions of Europe. The Lancet, 349: 1341–1346. Domestic Solar Water Heater for Developing Countries. Lawrence Berkeley
Eyre, N., M. Pavan, and L. Bodineau, 2009: Energy company obligations to save National Laboratory (LBNL), Berkeley, CA, USA.
energy in Italy, France and the UK: what have we learnt? In Proceedings of the Gallaher, M.P., A. C. O’Connor, J. L. Dettbarn, Jr., and L. T. Gilday, 2004: Cost
2009 European Council for an Energy Efficient Economy (ECEEE) Summer Study. Analysis of Inadequate Interoperability in the U.S. Capital Facilities Industry.
La Colle sur Loupe, France. US Department of Commerce Technology Administration National Institute of
FEEM, 2008: Social Costs of Electricity Generation and Policy Design. In Proceedings Standards and Technology, Gaithersburg, MD, USA.
of the final conference of the CASES Project, Fondazione Enni Enrico Matei Gamble, D., B. Dean, D. Meisegeier, and J. Hall, 2004: Building a path towards
(FEEM), September 29–30, 2008, Milan, Italy. zero energy homes with energy efficient upgrades. In Proceedings of the 2004
Feist, W., 1996: Life-cycle Energy Analysis: Comparison of Low-energy House, Passive American Council for an Energy Efficient Economy (ACEEE) Summer Study on
House, Self-sufficient House. In Proceedings of the International Symposium of Energy Efficiency in Buildings. Vol. 1, Washington, DC, USA. pp.95–106.
CIB W67.Vienna, Austria, pp.183–190. Garbesi, K. and L.B. Desroches, 2010: Max Tech and Beyond: Maximizing Appliance
Feist, W., J. Schnieders, V. Dorer, and A. Haas, 2005: Re-inventing air heating: con- and Equipment Efficiency by Design. Lawrence Berkeley National Laboratory,
venient and comfortable within the frame of the Passive House concept. Energy Berkeley, CA.
and Buildings, 37: 1186–1203. Garcia Casals, X., 2006: Analysis of building energy regulation and certification
Feist, W., 2007: Tasks – challenges – perspectives. Conference Proceedings, 11th in Europe: Their role, limitations and differences. Energy and Buildings, 38(5):
International Passive House Conference, Bregenz, Passive House Institute, 381–392.
Darmstadt, Germany, pp. 383–392. García-Frapolli E., A. Schilmann, V. Berrueta, H. Riojas-Rodríguez, R. Edwards,
Fisher, D., F. Schmid, and A. J. Spata, 1999: Estimating the energy-saving bene- M. Johnson, A. Guevara-Sanginés, C. Armendariz, and O. Masera, 2010:
fit of reduced-flow and/or multi-speed commercial kitchen ventilation systems. Beyond fuelwood savings: valuing the economic benefits of introducing
ASHRAE Transactions,105(1): 1138–1151. improved biomass cookstoves in the Purépecha region of Mexico. Ecological
Fisk, B., 1999: Indoor Air Quality Handbook, McGraw Hill, New York, NY. Economics, 69(12): 2598–2605.
Fisk, W. J., 2000: Health and productivity gains from better indoor environments and Geller, H. and S. Attali, 2005: The Experience with Energy Efficiency Policies and
their relationship with building energy efficiency. Annual Review of Energy and Programmes in IEA Countries: Learning from the Critics. International Energy
the Environment, 25(1): 537–566. Agency (IEA) Information Paper, Paris, France.
Florides, G. A., S. A. Tassou, S. A. Kalogirou, and L. C. Wrobel, 2002: Measures Geller, H., P. Harrington, A. H. Rosenfeld, S. Tanishima, and F. Unander, 2006:
used to lower building energy consumption and their cost effectiveness. Applied Policies for increasing energy efficiencies. 30 years of experience in OECD-
Energy, 73: 299–328. countries. Energy Policy, 34(5): 556–573.
749
Energy End-Use: Buildings Chapter 10
Genchi, Y., Y. Okano, and T. Ihara, 2007: Environmental impact assessment of services. In Proceedings of the European Council for an Energy Efficient Economy
Urban Heat Island phenomena based on Endpoint-type LCIA Methodology: Part (ECEEE) Summer Study 2005.ADEME Editions, Paris, France.
4 Evaluation of environmental impacts on sleep disorder caused by urban heat Hart & Cooley, Inc., 2009. Composition and Properties of Air. TechTalk,1(2),
island in Tokyo (in Japanese). Summaries of Technical Papers of Annual Meeting September-October.
Architectural Institute of Japan, Environmental Engineering I, 771–772. Hartway, R., S. Price, and C. K. Woo, 1999: Smart meter, customer choice and prof-
Gillingham, K., Newell, R., and K. Palmer, 2004: The effectiveness and cost of itable time-of-use rate option. Energy, 24(10): 895–903.
energy efficiency programmes. Resources. Resources for the Future (RFF) Harvey, L.D.D., 2006: A Handbook on Low-Energy Buildings and District-Energy
Technical paper, Washington, DC, USA. Systems. Earthscan, London, UK.
Gillingham, K., R. Newell, and K. Palmer, 2006: Energy efficiency policies: a retro- Harvey, L. D. D. and M. Siddall, 2008: Advanced glazing systems and the economics
spective examination. Annual Review of Environmental Resources, 31: 161–92. of comfort. Green Building Magazine, Spring 08: 30–35.
Goldman, C., N. Hopper, and J. Osborn, 2005: Review of the US ESCO indus- Harvey, L. D. D., 2009: Reducing energy use in the buildings sector: measures,
try market trends: an empirical analysis of project data. Energy Policy, 33(3): costs, and examples. Special Issue: Energy Efficiency: How Far Does it Get Us in
387–405. Controlling Climate Change?, 2(2): 139–163.
Graham, P., 2005: Design for Adaptability: An introduction to the principles and basic Harvey, L. D. D., 2010: Energy and the New Reality, Volume 1: Energy Efficiency and
strategies. The Environment Design Guide GEN 66, Royal Australian Institute of the Demand for Energy Services. Earthscan, London, UK.
Architects, Canberra, Australia. Hassett, K. and G. Metcalf. (1993). Energy conservation investments: do con-
Gram-Hanssen, K. 2004. Domestic electricity consumption: consumers and sumers discount the future correctly? Energy Policy, 21(6), 710–716.
appliances. In The Ecological Economics of Consumption. L. A. Reisch and I. Hastings, R. and M. Wall, 2007a: Sustainable Solar Housing, Volume 1: Strategies
Røpke (eds), Edward Elgar Publishing, London, UK, pp.132–149. and Solutions. Earthscan, London, UK.
Green, M. A., 2006: Consolidation of thin-film photovoltaic technology: the coming Hastings, R. and M. Wall, 2007b: Sustainable Solar Housing, Volume 2: Exemplary
decade of opportunity. Progress in Photovoltaics: Research and Applications, 14: Buildings and Technologies. Earthscan, London, UK.
383–392. Haus der Zukunft, 2006: The very first reconstruction in Austria of a one-unit house
Greening, L., D. Green, and C. Difiglio, 2000: Energy efficiency and consumption – to passive house standard (Model project in Pettenbach/Upper Austria). www.
the rebound effect – a survey. Energy Policy, 28(6–7): 389–401. hausderzukunft.at/results.html/id3955 (accessed 30 August, 2011).
Gustavsson, L. and R. Sathre, 2006: Variability in energy and carbon dioxide bal- Haus der Zukunft, 2007: PASSIVe house renovation, Makartstrasse, Linz. www.
ances of wood and concrete building materials. Building and Environment, hausderzukunft.at/results.html/id3951 (accessed 30 August, 2011).
41(7): 940–951. Hausman, J. A., 1979: Individual discount rates and the purchase and utilization of
Gutschner, M. and Task-7 Members, 2001: Potential for Building Integrated energy-using durables. Bell Journal of Economics, 10(1): 33.
Photovoltaics. International Energy Agency (IEA) of the Organisation for Healy, J. D., 2004:Housing, Fuel Poverty, and Health: a Pan-European Analysis.
Economic Cooperation and Development (OECD), Paris, France. Ashgate Publishing, Aldershot, UK.
Guy, S. and E. Shove, 2000: A Sociology of Energy, Buildings, and the Environment. Healy, J. D. and J. P. Clinch, 2002: Fuel poverty, thermal comfort and occupancy: results
Routledge, London, UK. of a national household-survey in Ireland. Applied Energy, 73(3–4): 329–343.
Haas, R., P. Biermayr, J. Zoechling, and H. Auer, 1998: Impacts on electricity con- Hegarty, D., 2006: Satisfying a burning need. Philips Research Password,28(October):
sumption of household appliances in Austria: a comparison of time series and (28–31)
cross-section analyses. Energy Policy, 26(13): 1031–1040. Hegedus, S., 2006: Thin film solar modules: The low cost, high throughput and versa-
Haas, R. and P. Biermayr, 2000: The rebound effect for space heating – Empirical tile alternative to Si wafers. Progress in Photovoltaics. Research and Applications,
evidence from Austria. Energy Policy, 28(6–7): 403–410. 14: 393–411.
Halozan, H. and R. Rieberer, 1997: Air heating systems for low-energy buildings. Heijne, C., 2003: Energy Education Hitting Home. Centre for Sustainable Energy,
IEA Heat Pump Centre Newsletter,15(4): 21–22. Bristol, UK.
Haller, A., E. Schweizer, P. O. Braun, and K. Voss, 1997: Transparent Insulation in Hein, L., K.V. Koppen, R.S. de Groot, and E.C. van Ierland, 2005: Spatial scales,
Building Renovation. James and James, London, UK. stakeholders and the valuation of ecosystem services. Ecological economics,
Hamada, Y., M. Nakamura, K. Ochifuji, S. Yokoyama, and K. Nagano, 2003: 57(2): 209–228.
Development of a database of low energy homes around the world and analysis Henderson, G., 2005: Home air conditioning in Europe – how much energy would we
of their trends. Renewable Energy, 28: 321–328. use if we became more like American households? Proceedings of the European
Haney, A. B., T. Jamasb, and M. G. Pollitt, 2008: Smart Metering and Electricity Council for an Energy Efficient Economy (ECEEE), June 2005, Mandelieu, France.
Demand: Technology, Economics and International Experience. ESRC Electricity Hermelink, A., 2006: A retrofit for sustainability: meeting occupants’ needs within
Policy Research Group and Faculty of Economics, University of Cambridge, UK. environmental limits. In Proceedings of the American Council for an Energy-
Harrigan, M. and E. Curley, 2010: Global Environmental Education, Lacking Energy. Efficient Economy (ACEEE) Summer Study on Energy Efficiency in Buildings.
Proceedings of American Council for an Energy-Efficient Economy (ACEEE) 2010 Pacific Grove, CA, USA.
Summer Study on Building, Pacific Grove, CA, USA. Hernandez, P. and P. Kenny, 2010: From net energy to zero energy buildings:
Harris, J., B. Aebischer, J. Glickman, G. Magnin, A. Maier, and J. Vigand, 2005: defining life cycle zero energy buildings (LC-ZEB). Energy and Buildings, 42(6):
Public sector leadership: transforming the market for efficient products and 815–821.
750
Chapter 10 Energy End-Use: Buildings
Hertwich, E. G., 2005a: Consumption and the rebound effect: An industrial ecology IEA, 2003: Cool Appliances, Policy Strategies for Energy Efficient Homes. International
perspective. Journal of Industrial Ecology, 9(1–2): 85–98. Energy Agency (IEA) of the Organisation for Economic Cooperation and
Hertwich, E. G., 2005b: Lifecycle approaches to sustainable consumption: a critical Development (OECD), Paris, France.
review. Environmental Science and Technology, 39(13): 4673–4684. IEA, 2004: Energy Balances of non-OECD Countries 2001–2002.International Energy
Hertwich, E. G, 2011: The life cycle environmental impacts of consumption. Economic Agency (IEA) of the Organisation for Economic Cooperation and Development
Systems Research, 23(1): 27–48. (OECD), Paris, France.
Hestnes, A. G. and N. U. Kofoed, 1997: OFFICE: Passive Retrofitting of Office IEA, 2005a: Evaluating Energy Efficiency Policy Measures & DSM Programmes, Volume
Buildings to Improve their Energy Performance and Indoor Environment. JOULE 1 Evaluation Guidebook. International Energy Agency (IEA) of the Organisation
Programme: JOR3-CT96–0034, European Commission Directorate General for for Economic Cooperation and Development (OECD), Paris, France.
Science Research and Development, Brussels, Belgium. IEA, 2005b: Saving Electricity in a Hurry – Dealing with Temporary Shortfalls in
Hestnes, A. G. and N. U. Kofoed, 2002: Effective retrofitting scenarios for energy Electricity Supplies. International Energy Agency International Energy Agency
efficiency and comfort: results of the design and evaluation activities within the (IEA) of the Organisation for Economic Cooperation and Development (OECD),
OFFICE project. Building and Environment, 37(6): 569–574. Paris, France.
Hewitt, D., M. Frankel, and D. Cohan, 2010: The future of energy codes. In IEA, 2006: World Energy Outlook 2006. International Energy Agency (IEA) of the
Proceedings of the American Council for an Energy-Efficient Economy (ACEEE) Organisation for Economic Cooperation and Development (OECD), Paris,
2010 Summer Study on Energy Efficiency in Buildings. Pacific Grove, CA, USA. France.
Hoffman, A. J. and R. Henn, 2008: Overcoming the social and psychological barriers IEA, 2007a: Mind the Gap- Quantifying Principal-Agent Problems in Energy Efficiency.
to green building. Organization & Environment, 21(4): 390–419. International Energy Agency (IEA) of the Organisation for Economic Cooperation
Holt, S. and L. Harrington, 2003: Lessons learnt from Australia’s standards and and Development (OECD), Paris, France.
labelling programme. In Proceedings of the European Council for an Energy IEA, 2007b: Energy Use in the New Millennium. Trends in IEA countries. In Support of
Efficient Economy (ECEEE)2003 Summer Study. Saint Raphaël, France. the G8 Plan of Action. International Energy Agency (IEA) of the Organisation for
Holton, J. K. and P. E. Rittelmann, 2002: Base loads (lighting, appliances, DHW) and Economic Cooperation and Development (OECD), Paris, France.
the high performance house. ASHRAE Transactions, 108(Part 1): 232–242. IEA, 2008a: Energy Technology Perspectives, 2008: Scenarios & Strategies to 2050:
Howe, M., D. Holland, and A. Livchak, 2003: Displacement ventilation: Smart way in Support of the G8 Plan of Action. International Energy Agency (IEA) of the
to deal with increased heat gains in the telecommunication equipment room. Organisation for Economic Cooperation and Development (OECD), Paris,
ASHRAE Transactions, 109(Part 1): 323–327. France.
Howieson, S. G., 2005: Multiple deprivation and excess winter deaths in Scotland. IEA, 2008b: World Energy Outlook 2008. International Energy Agency (IEA) of
The Journal of the Royal Society for the Promotion of Health, 125(1): 18–22. the Organisation for Economic Cooperation and Development (OECD), Paris,
Hughes, P. J. and J. A. Shonder, 1998: The Evaluation of a 4000-Home Geothermal France.
Heat Pump Retrofit at Fort Polk, Louisiana, ORNL/CON-460, Oak Ridge National IEA, 2008c: Trends in Photovoltaic Applications, Survey Report of Selected IEA
Laboratory, TN, USA. Countries Between 1992 and 2007. Report IEA-PVPS T1–17,International Energy
Hui, S. C. M., 2002: Using performance-based approach in building energy stand- Agency (IEA) of the Organisation for Economic Cooperation and Development
ards and codes. In Proceedings of the Chonqing-Hong Kong Joint Symposium (OECD)
2002.8–10 July 2002, Chongqing, China, pp.A52–61. IEA. 2010a: Energy Technology Perspective. Scenarios & Strategies to 2050.
Humm, O., 2000: Ecology and economy when retrofitting apartment buildings. IEA International Energy Agency (IEA). Paris, France.
Heat Pump Centre Newsletter, 15(4): 17–18. IEA, 2010b: World Energy Outlook 2010. International Energy Agency (IEA), Paris,
Hunt, A., Watkiss, P., 2011: Climate Change Impacts and Adaptation in Cities: A France.
Review of the Literature. Climatic Change, 104 (1): 13–49 IEA, 2010c: Energy Performance Certification of Buildings. International Energy
Hutton, R. B., G. A. Mauser, P. Filiatrault, and O. T. Ahtola, 1986: Effects of cost- Agency (IEA), Paris, France.
related feedback on consumer knowledge and consumption behaviour: a field IEA, 2010d: Energy Poverty. How to make energy access universal? Special early
experimental approach. Journal of Consumer Research, 13(3): 327–336. excerpt of the World Energy Outlook 2010 for the UN General Assembly on
Hutton, G., E. Rehfuess, and F. Tediosi, 2007: Evaluation of the costs and ben- the Millennium Development Goals. International Energy Agency (IEA), United
efits of interventions to reduce indoor air pollution. Energy for Sustainable Nations Development Programme (UNDP) and United Nations Industrial
Development,11(4): 34–43. Development Organization (UNIDO), Paris, France.
Hutson, S. S., N. L. Barber, J. F. Kenny, K. S. Linsey, D. S. Lumia and M. A. Maupin, IEA Online Statistics, 2007: Statistics and Balances. International Energy Agency
2004: Estimated Use of water in the United States in 2000. USGS Circular 1268, (IEA) of the Organisation for Economic Cooperation and Development (OECD),
United States Geological Survey (USGS), Reston, VA, USA. Paris, France, www.iea.org/stats/index.asp (accessed 28 April 2011).
IBM, 2007:Ontario Energy Board Smart Price Pilot Final Report, IBM Global Business IIASA, 2007: GGI Scenario Database. International Institute for Applied System
Services and eMeter Strategic Consulting, Ontario Energy Board, Toronto, ON, Analysis (IIASA), Laxenburg, Austria. www.iiasa.ac.at/Research/GGI/DB/
Canada. (accessed April 2011).
IEA, 1999: District Cooling, Balancing the Production and Demand in CHP. Netherlands Indiastat, 2010: Figures at All-India, State level. Revealing India statistically.
Agency for Energy and Environment, International Energy Agency (IEA), Sittard, Indiastat.com. www.indiastat.com/power/26/consumptionandsale/70/stats.
the Netherlands. aspx (accessed April 2011).
751
Energy End-Use: Buildings Chapter 10
Interface Engineering, 2005: Engineering a Sustainable World: Design Process and Controls Testbed. LBNL-43096 REV, Lawrence Berkeley National Laboratory,
Engineering Innovations for the Center for Health and Healing at the Oregon Berkeley, CA, USA.
Health and Science University, River Campus. Interview by Maria Sharmina, Jin, S. H, 2007: The effectiveness of energy efficiency improvement in a develop-
2009. www.interface-engineering.com. ing country: Rebound effect of residential electricity use in South Korea. Energy
IPCC, 1996: Climate Change 1995. IPCC Second Assessment. Report of the Policy, 35(11): 5622–5629.
Intergovernmental Panel on Climate Change (IPCC), Cambridge University Press, Jochem E., T. Barker, S. Scrieciu, W. Schade, N. Helfrich, O. Edenhofer, N. Bauer,
Cambridge, UK and New York, NY, USA. S. Marchand, J. Neuhaus, S. Mima, P. Criqui, J. Morel, B. Chateau, A. Kitous,
IPCC, 2007: Climate Change 2007 – Mitigation. Contribution of Working Group III G. J. Nabuurs, M. J. Schelhaas, T. Groen, L. Riffeser, F. Reitze, E. Jochem, G.
to the Fourth Assessment Report of the Intergovernmental Panel on Climate Catenazzi, M. Jakob, B. Aebischer, W. Eichhammer, A. Held, M. Ragwitz, U.
Change, B. Metz, O.R. Davidson, P.R. Bosch, R. Dave, L.A. Meyer (eds), Cambridge Reiter, and H. Turton, 2009: Adaptation and Mitigation Strategies: Supporting
University Press, Cambridge, United Kingdom and New York, NY, USA. European Climate Policy. Report D-M1.2 of the reference scenario for Europe.
Itard, L. and G. Klunder, 2007: Comparing environmental impacts of renovated Fraunhofer ISI, Karlsruhe, Germany.
housing stock with new construction. Building Research and Information, 35(3): John, M., M. Smith, and S. Korosec, 2005: Integrated Energy Policy Report.
252–267. California Energy Commission, Sacramento, CA.
Jaboyedoff, P., C. A. Roulet, V. Dorer, A. Weber, and A. Pfeiffer, 2004: Energy Johnson, M., R. Edwards, C. Alatorre, and O. Masera, 2008: In-field greenhouse
in air-handling units – results of the AIRLESS European project. Energy and gas emissions from cookstoves in rural Mexican households. Atmospheric
Buildings, 36(4): 391–399. Environment, 42(2008): 1206–1222.
Jackson, J., 2008: Energy Budgets at Risk (EBaR): A Risk Management Approach to Jones Lang LaSalle/CREIS, 2006: OSCAR – Office Service Charge Analysis Report.
Energy Purchase and Efficiency Choices. Wiley Finance, Hoboken, NJ, USA. Based on 397 buildings with 6 million m2 in 2006.Jones Lang LaSalle. Chicago,
Jackson, T., 2009: Prosperity without growth-Economics for a finite planet, Earthscan, IL, USA.
Oxford. Joosen, S., M. Harmelink, and K. Blok, 2004: Evaluation Climate Policy in the
Jaffe, A. B. and R. N. Stavins, 1994: The energy-efficiency gap. Energy Policy, 22(10): Built Environment 1995–2002. Ecofys report prepared for the Dutch Ministry of
804–810. Housing, Spatial Planning and the Environment, Utrecht, the Netherlands.
Jain, M., V. Gaba, and L. Srivastava, 2007: Managing Power Demand – A Case Jyukankyo Research Institute and Japan Centre for Climate Change Action,
Study of Residential Sector in Delhi. The Energy & Resources Institute (TERI), Teri 2007: Fact sheet of energy saving home electrical appliances II. Energy saving of
Press, New Delhi, India. home electrical appliances (1) Air conditioner (in Japanese). Jyukankyo Research
Jakob, M., 2006: Marginal costs and co-benefits of energy efficiency investments – Institute and the Japan Center for Climate Change Action, Tokyo, Japan.
the case of the Swiss residential sector. Energy Policy, 34(2): 172–187. Kats, G. 2003: The Costs and Financial Benefits of Green Buildings. A report prepared
Janda, K. B., 1998: Building Change: Effects of Professional Culture and Organizational for California’s Sustainable Building Task Force, Sacramento, CA, USA.
Context on Energy Efficiency Adoption in Buildings. Energy and Resources Group, Kats, G., L. Alevantis, A. Berman, E. Mills, and J. Perlman, 2003: The Costs
University of California at Berkeley, Berkeley, CA, USA. and Financial Benefits of Green Buildings. A report to California’s Sustainable
Janda, K. B., 1999: Re-Inscribing Design Work: Architects, Engineers, and Efficiency Building Task Force, Sacramento, CA, USA.
Advocates. Proceedings of the European Council for an Energy-Efficient Economy Kats, G., 2005: National Review of Green Schools: Costs, Benefits, and Implications
(ECEEE) Summer Study. June 1–6, 2009, Mandelieu, France. for Massachusetts. A report for the Massachusetts Technology Collaborative,
Janda, K. B., C. Payne, R. Kunkle, and L. Lutzenhiser, 2002: What organizations did Boston, MA.
(and didn’t) do: three factors that shaped conservation responses to California’s Katsev, R. D. and T. R. Johnson, 1987: Promoting Energy Conservation: An Analysis
2001 ‘crisis’. In Proceedings of the American Council for an Energy-Efficient of Behavioral Research. Westview Special Studies in Natural Resources and
Economy (ACEEE) 2002 Summer Study, Asilomar, CA, USA. Energy Management, Westview Press, Boulder, CO, USA.
Janda, K. B., 2008: Implications of Ownership in the U.S. and U.K.: An Exploration Kelleher, E., 2006: US Homebuilders Go Green. Clean Energy Solutions, US Department
of Energy Star Buildings & the Energy Efficiency Accreditation Scheme. of State, Bureau of International Information Programs, Washington, DC, USA.
Proceedings of the American Council for an Energy-Efficient Economy (ACEEE) Kempton, W., 1992: Psychological research for new energy problems. American
Summer Study on Energy Efficiency in Buildings, August 17–22, 2008, Asilomar, Psychologist, 47(10): 1213.
CA, USA. Keshner, M. S. and R. Arya, 2004: Study of Potential Cost Reductions Resulting
Janda, K.B., 2009: Worldwide status of energy standards for buildings: a 2009 from Super-Largescale Manufacturing of PV Modules. Final Subcontract Report,
update. In Proceedings of the European Council for an Energy Efficient Economy NREL/SR-520–56846. Washington, DC, USA.
(ECEEE) Summer Study, June 1–6, 2009, Cote d’Azur, France. Khan, J., M. Harmelink, R. Harmsen, W. Irrek, and N. Labanca, 2007: From Theory
Jannuzzi, G. M., 2005: Energy Efficiency and R&D Activities in Brazil: Experiences from Based Policy Evaluation to SMART Policy Design. Summary Report of the AID-EE
the Wirecharge Mechanism (1998–2004). In Developing Financial Intermediation Project. Project executed within the framework of the Energy Intelligence for
Mechanisms for Energy Projects in Brazil, China and India. Prepared by Econergy Europe program, EIE-2003–114, Brussels, Belgium.
International Corporation, Angra dos Reis, Brazil. Kikegawa, Y., Y. Genchi, H. Kondo, and K. Hanaki, 2006: Impacts of city-block-
Jennings, J. D., F. M. Rubinstein, D. DiBartolomeo, and S. L. Blanc, 2000: scale countermeasures against urban heat-island phenomena upon a building’s
Comparison of Control Options in Private Offices in an Advanced Lighting energy-consumption for air-conditioning. Applied Energy, 83(6): 649–668.
752
Chapter 10 Energy End-Use: Buildings
Killip, G., 2008: Building a Greener Britain: Transforming the UK’s Existing Housing Lee, W. L. and F. W. Yik, 2004: Regulatory and voluntary approaches for enhancing
Stock. Environmental Change Institute, Oxford, UK. building energy efficiency. Progress in Energy and Combustion Science,30(2004):
King, A. D. (ed.), 1980: Buildings and Society. Routledge and Kegan Paul, London, 477–499.
UK. Lees, E., 2006: Evaluation of the Energy Efficiency Commitment 2002–05. Oxon,
Kinney, S. and M. A. Piette, 2002: Development of a California Building Energy London.
Benchmarking Database. LBNL 50676, Lawrence Berkeley Laboratory Report, Lees, E. W., 2008: Evaluation of the Energy Efficiency Commitment 2005–08. Report
Berkeley, CA, USA. to the Department of Energy and Climate Change. Eoin Lees Energy, Oxford,
Koch-Nielsen, H., 2002: Stay Cool: A Design Guide for the Built Environment in Hot UK.
Climates. James and James, London, UK. Lehtomäki, A., S. Huttunen, and J. A. Rintala, 2007: Laboratory investigations on
Koebel, C. T., 2008: Innovation in Homebuilding and the Future of Housing. Journal co-digestion of energy crops and crop residues with cow manure for methane
of the American Planning Association, 74(1): 45–58. production: Effect of crop to manure ratio. Resources, Conservation and
Kohlhaas, M., 2005: Gesamtwirtschaftliche Effekte der ökologischen Steuerreform. Recycling, 51(3): 591–609.
(Macroeconomic effects of the ecological tax reform), DIW Berlin, Abteliung Lenzen, M. and G. Treloar, 2002: Embodied energy in buildings: wood ver-
Energie, Verkehr, Umwelt, Berlin, Germany. sus concrete – reply to Borjesson and Gustavsson. Energy Policy, 30(3):
Kok, N., P. Eichholtz, R. Bauer, and P. Peneda, 2010: Environmental Performance: 249–255.
A Global Perspective on Commercial Real Estate. European Centre for Corporate Lenzen, M., M. Wier, C. Cohen, H. Hayami, S. Pachauri, and R. Schaeffer,
Engagement, Maastricht University School of Business and Economics, 2006: A comparative multivariate analysis of household energy requirements
Maastricht, the Netherlands. in Australia, Brazil, Denmark, India and Japan. Energy, 31(2–3): 181–207.
Kolokotroni, M., 2001: Night ventilation cooling of office buildings: parametric ana- Levine, M., D. Ürge-Vorsatz, K. Blok, L. Geng, D. Harvey, S. Lang, G. Levermore,
lyses of conceptual energy impacts. ASHRAE Transactions, 107(1): 479–489. A. Mongameli Mehlwana, S. Mirasgedis, A. Novikova, J. Rilling, and H.
Kooreman, P. and T. Steerneman, 1998: A note energy efficiency investments of an Yoshino, 2007: Residential and commercial buildings. In Climate Change 2007:
expected cost minimizer. Resource and Energy Economics, 20: 373–381. Mitigation. Contribution of Working Group III to the Fourth Assessment Report of
Kosmo, M., 1989: Commercial energy subsidies in developing countries: opportunity the Intergovernmental Panel on Climate Change (IPCC) B. Metz, O.R. Davidson,
for reform. Energy Policy,17(3): 244–253. P.R. Bosch, R. Dave, L.A. Meyer (eds.), Cambridge University Press, Cambridge,
Krapmeier, H. and E. Drössler (eds.), 2001: CEPHEUS: Living Comfort Without United Kingdom and New York, NY, USA.
Heating. Springer-Verlag, Vienna, Austria. Lewis, M., 2004: Integrated design for sustainable buildings. Building for the future.
Krey, M., 2005: Transaction costs of unilateral CDM projects in India – results from A Supplement to ASHRAE Journals, 46(9): 2–3.
an empirical survey. Energy Policy, 33(18): 2385–2397. Li, D. H. W. and J. C. Lam, 2003: An investigation of daylighting performance and
Kushler, M, D. Work, and P. Witte, 2004: Five Years In: An Examination of the energy saving in a daylight corridor. Energy and Buildings, 35: 365–373.
First Half Decade of Public Benefits Energy Efficiency Policy. American Council Li, J.-F., O. W. H. Wai, Y. S. Li, J.M. Zhan, Y. A. Ho, J. Li, and E. Lam, 2010: Effect
for an Energy Efficient Economy (ACEEE). Report U041, Washington, D.C., of green roof on ambient CO2 concentration. Building and Environment, 45:
USA. 2644–2651.
Larsen, B. M. and R. Nesbakken, 1997: Norwegian emissions of CO2 1987–1994. Liddell, C. and C. Morris, 2010: Fuel poverty and human health: A review of recent
Environmental and Resource Economics, 9(3): 275–90. evidence. Energy Policy, 38(6): 2987–2997.
Larsson, N., 2001: Canadian green building strategies. In Proceedings of the 18th Lin, B. and Z Jiang, 2011: Estimates of energy subsidies in China and impact of
International Conference on Passive and Low Energy Architecture.7–9 November, energy subsidy reform. Energy Economics, 33(2): 273–283.
Florainopolis, Brazil, pp.17–25. Lin, Z. and S. Deng, 2004: A study on the characteristics of nighttime bedroom cooling
Laustsen, J., 2008: Energy Efficiency Requirements in Building Codes, Energy load in tropics and subtropics. Building and Environment, 39(9):1101–1114.
Efficiency Policies for New Buildings. IEA information paper. International Energy Listokin, D. and D. Hattis, 2004: Building Codes and Housing. Rutgers University,
Agency (IEA)of the Organisation for Economic Cooperation and Development NJ, USA and Building Technology Inc., MA, USA.
(OECD), Paris, France. Liu, M. and D. E. Claridge, 1999: Converting dual-duct constant-volume systems
Laustsen, J., forthcoming: Reducing Energy in Buildings with a Factor 4. An IEA to variable-volume systems without retrofitting the terminal boxes. ASHRAE
Factor Four Strategy for Buildings. International Energy Agency (IEA) of the Transactions, 105(Part 1): 66–70.
Organisation for Economic Cooperation and Development (OECD), Paris, Liu, M., D. E. Claridge and W. D. Turner, 2003: Continuous commissioning of build-
France. ing energy systems. Journal of Solar Energy Engineering, 125(3): 275–281.
Le Fur, B., 2002: Panorama des dispositifs d’économie d’énergie en place dans les Lloyd, B., 2006: Fuel poverty in New Zealand. Social Policy Journal of New Zealand,
pays de L’Union Européenne. Club d’Amélioration de l’Habitat, Paris, France. 27: 142–155.
Leckner, M. and R. Zmeureanu, 2011: Life cycle cost and energy analysis of Lopes, C., L. Pagliano and S. Thomas, 2000: Conciliating the economic interest
a Net Zero Energy House with solar combisystem. Applied Energy, 88(1): of energy companies with demand-side management – A review of funding
232–241. mechanisms in a changing market. In Proceedings of the UIE International
Lee, K. H. and R. K. Strand, 2008: The cooling and heating potential of an earth tube Conference – Electricity for a Sustainable Urban Development, Lisbon,
system in buildings. Energy and Buildings, 40(4): 486–494. Portugal.
753
Energy End-Use: Buildings Chapter 10
Lorenzioni, I., S. Nicholson-Cole, and L. Whitmarsh, 2007: Barriers perceived McNeil, M.A., V.E. Letschert, and S. de la Rue du Can, 2008: Global Potential
to engaging the UK public with climate change and their policy implications. of Energy Efficiency Standards and Labeling Programs. LBNL-760E, Lawrence
Global Environmental Change, 17(3–4): 445–459. Berkeley National Laboratories, Berkeley, CA, USA.
Loudermilk, K. J., 1999: Underfloor air distribution solutions for open office applica- McNeil, M. A. and V. E. Letschert, 2010: Modeling diffusion of electrical appliances
tions. ASHRAE Transactions, 105(Part 1): 605–613. in the residential sector. Energy and Buildings, 42(6):783–790.
Lovins, A. B., 2005: Energy End-Use Efficiency. A Part of its 2005–06 Study, Meier, A. and A. Eide, 2007: How many people actually see the price signal?
Transitions to Sustainable Energy Systems. Inter Academy Council, Amsterdam, Quantifying market failures in the end-use of energy. In Proceedings of the
the Netherlands. European Council for an Energy Efficient Economy (ECEEE) Summer Study, 2007,
Lu, L. and H. X. Yang, 2010: Environmental payback time analysis of a roof-mounted Stockholm, Sweden.
building-integrated photovoltaic (BIPV) system in Hong Kong. Applied Energy, Melichar, J., M. Havranek, V. Maca, M. Scasny, and M. Kudelko, 2004:
87(12): 3625–3631. Implementation of ExternE Methodology in Eastern Europe. Final Report on
Lutzenhiser, L., 1993: Social and behavioral aspects of energy use. Annual Review of Work Package 7, Contract No. ENG1-CT-2002–00609, Extension of Accounting
Energy and the Environment, 18: 247–289. Framework and Policy Applications, The European Commission (EC), Brussels,
Lutzenhiser, L., 1994: Innovation and organizational networks. Energy Policy, Belgium.
22(10): 867–876. Menanteau, P., 2007: Policy Measures to Support Solar Water Heating: Information,
Lutzenhiser, L., K. B. Janda, R. Kunkle, and C. Payne, 2002: Understanding the Incentives and Regulations. Technical Report prepared for the World Energy
Response of Commercial and Institutional Organizations to the California Energy Council (WEC), London, UK and Agence de l’Environnement et de la Maîtrise de
Crisis California Energy Commission. Sacramento, CA. l’Energie (ADEME), Paris, France.
MacAvoy, H., 1997: All-Ireland Policy Paper on Fuel Poverty and Health. Institute of Meyers, S., J. E. McMahon, and B. Atkinson, 2008: Realized and Projected Impacts
Public Health in Ireland, Dublin, Ireland. of U.S. Energy Efficiency Standards for Residential and Commercial Appliances –
Manisha, J., V. Gaba and L. Srivastava, 2007: Managing Power Demand – A case LBNL-63017. Lawrence Berkeley National Laboratory, Berkeley, CA, USA.
study of the residential sector in Delhi. The Energy and Resources Institute Michaelowa, A. and F. Lotzo, 2005: Transaction costs, institutional rigidities and the
(TERI), New Delhi, India. size of the clean development mechanism. Energy Policy, 33(4): 511–523.
Mansur, E. T., R. Mendelsohn, and W. Morrison, 2005: A Discrete-Continuous Mills, E., 1991: Evaluation of European lighting programmes: utilities finance energy
Choice Model of Climate Change Impacts on Energy. Columbia University, New efficiency. Energy Policy, 19 (3): 266–278.
York, NY, USA. Mills, E., 2009: Building Commissioning: A Golden Opportunity for Reducing Energy
Marchand, C., M. H. Laurent, R. Rezakhanlou, and Y. Bamberger, 2008: Le bâti- Costs and Greenhouse Gas Emissions. LBNL report prepared for California
ment sans énergie fossile? Les bâtiments pourront-ils se passer des énergies Energy Commission Public Interest Energy Research (PIER), Lawrence Berkeley
fossiles en France à l’horizon 2050. Futuribles, 343(July): 79–100. National Laboratory, Berkeley, CA, USA.
Martens, R., B. Bass, and S. S. Alcazar, 2008: Roof–envelope ratio impact on green Milne, G. and B. Boardman, 2000: Making cold homes warmer: the effect of energy
roof energy performance. Urban Ecosystems, 11(4): 399–408. efficiency improvements in low-income homes. A report to the Energy Action
Martinsen D, V. Krey, and P. Markewitz, 2007: Implications of high energy prices Grants Agency Charitable Trust. Energy Policy, 28(6–7): 411–424.
for energy system and emissions – the response from an energy model for Milton D., P.M. Glencross, and M.D. Walters, 2000: Risk of sick leave associated
Germany. Energy Policy, 35(9): 4504–4515. with outdoor ventilation level, humidification, and building related complaints.
Masera, O. R., B. D. Saatkamp, and D. M. Kammen, 2000: From linear fuel switch- Indoor Air, 10(4): 212–21.
ing to multiple cooking strategies: a critique and alternative to the energy ladder Mirasgedis, S., Y. Sarafidis, E. Georgopoulou, V. Kotroni, K. Lagouvardos, and
model for rural households. World Development, 28(12): 2083–2103. D.P. Lalas, 2007: Modeling framework for estimating impacts of climate change
Masera, O., R. Edwards, C. Armendáriz, V. Berrueta, M. Johnson, L. Rojas, and on electricity demand at regional level: case of Greece. Energy Conversion and
H. Riojas-Rodríguez, 2007: Impact of “Patsari” improved cookstoves on Management, 48(5): 1737–1750.
indoor air quality in Michoacan, Mexico. Energy For Sustainable Development, MOE, 2006: Ministry of Environment, Government of Japan, press release on
11(2): 45–56. 11/10/2006 (in Japanese). www.env.go.jp/press/press.php?serial=7690
McDonell, G., 2003: Displacement ventilation. The Canadian Architect, 48(4): (accessed December 31, 2010).
32–33. Monahan, J. and J. C. Powell, 2011: An embodied carbon and energy analysis
McDonell, G., 2004: Personal communication. Omicron Consulting, Vancouver, of modern methods of construction in housing: a case study using a lifecycle
Canada, December, 2004. assessment framework. Energy and Buildings, 43(1): 179–188.
McGraw-Hill Construction, 2006: Green Building SmartMarket Report. McGraw- Morch, A. Z., J. Parsons, and J. C. P. Kester, 2007: Smart Electricity Metering as an
Hill Construction, New York, NY, USA. Energy Efficiency Instrument: Comparative Analyses of Regulation and Market
McMakin, A. H., E. L. Malone, and R. E. Lundgren, 2002: Motivating Residents to Conditions in Europe. In European Council for an Energy Efficient Economy
Conserve Energy without Financial Incentives, 34(6): 848–863. (ECEEE) Summer Study, Stockholm, Sweden.
McNeil, M. and V. Letschert, 2008: Future Air Conditioning Energy Consumption in Morrison, C., and N. Shortt, 2008: Fuel poverty in Scotland: refining spatial reso-
Developing Countries and what can be done about it: The potential of Efficiency in lution in the Scottish Fuel Poverty Indicator using a GIS-based multiple risk
the Residential Sector. Lawrence Berkeley National Laboratory, Berkeley, CA, USA. index. Health & Place, 14(4): 702–717.
754
Chapter 10 Energy End-Use: Buildings
Mundaca, L., 2007: Transaction costs of tradable white certificate schemes: the Oke, T.R., 1982: The energetic basis of the urban heat island. Quarterly Journal of the
energy efficiency commitment as case study. Energy Policy, 35(8): 4340–4354. Royal Meteorological Society, 108(455): 1–25.
Murakoshi, C., H. Nakagami, M. Tsuruda, and N. Edamura, 2005: New Challenges OPET Network, 2004: OPET Building European Research Project: final reports.
of Japanese Energy Efficiency Program by Top Runner Approach. Proceedings of Osawa, H. and M. Hayashi, 2009: Present status of the indoor chemical pollution
the European Council for an Energy Efficient Economy (ECEEE) 2005 Summer in Japanese houses based on the nationwide field survey from 2000 to 2005.
Study, Stockholm, Sweden. Building and Environment, 44(7): 1330–1336.
MURE, 2007: Mesure d’Utilisation Rationnelle de l’Energie (MURE) Database. www. Pachauri, S. and D. Spreng, 2002: Direct and indirect energy requirements of house-
isis-it.com/mure/ (accessed December 31, 2010). holds in India. Energy Policy,30(6): 511–523.
MURE, 2008: Mesure d’Utilisation Rationnelle de l’Energie (MURE) Database. www. Pachauri, S. and L. W. Jiang, 2008: The household energy transition in India and
isis-it.com/mure/ (accessed December 31, 2010). China. Energy Policy, 36(11): 4022–4035.
Nagayama, H., 2008: Electric Power Sector Reform Liberalization Models and Electric Palmer, K., 1999: Electricity Restructuring: Shortcut or Detour on the Road to
Power Prices in Developing Countries: An Empirical Analysis Using International Achieving Greenhouse Gas Reductions? Resources for the Future Climate Issue
Panel Data. Energy Economics, 31(3): 463–472. Brief 18, Resources for the Future, Washington, DC, USA.
Nahuelhual, L., P. Donoso, A. Ñara, D. Nuñez, C. Oyárzun, and E. Neira, Parfomak, P.W. and L.B. Lave, 1996: How many kilowatts are in a negawatt?: veri-
2007: Valuing ecosystem services of Chilean temperate forests. Environment, fying ex post estimates of utility conservation impacts at the regional level. The
Development and Sustainability, 9(4):481–499. Energy Journal,17(4): 59–88.
Narumi, T., 2007: Impact of the Temperature Change upon the Human Health in Osaka Parker, D. S., J.R. Sherwin, J.K. Sonne, S.F. Barkaszi, D.B. Floyd, and C. R. Withers,
Prefecture (in Japanese). Summaries of Technical Papers of Annual Meeting. 1998: Measured energy savings of a comprehensive retrofit in an existing
Architectural Institute of Japan. Environmental Engineering I: 763–764. Florida residence. In Proceedings of the 1998 American Council for an Energy
Nassen, J., J. Holmberg, A. Wadeskog, and M. Nyman, 2007: Direct and indirect Efficient Economy (ACEEE) Summer Study on Energy Efficiency in Buildings, vol.
energy use and carbon emissions in the production phase of buildings: an input- 1, Washington, DC, USA pp. 235–251.
output analysis. Energy, 32(9): 1593–1602. Parker, D. S., J. K. Sonne, and J. R. Sherwin, 2002: Comparative Evaluation of the
National Action Plan for Energy Efficiency, 2009: Customer Incentives for Energy Impact of Roofing Systems on Residential Cooling Energy Demand in Florida.
Efficiency Through Electric and Natural Gas Rate Design. Prepared by William In Proceedings of the 2002 American Council for an Energy Efficient Economy
Prindle, ICF International, Inc. (ACEEE) Summer Study on Energy Efficiency in Buildings, Vol.1., Washington,
National Medical Expenditure Survey, 1999: The economic burden of asthma in D.C., pp.219–234.
US children. Journal of Allergy, Clinical Immunology, 104(5): 957–963. Parker, D., D. Hoak, A. Meier, and R. Brown, 2006: How Much Energy Are We
National Research Council, 2009: America’s Energy Future: Technology and Using? Potential of Residential Energy Demand Feedback Devices. In Proceedings
Transformation. National Research Council (NRC) of the National Academies of 2006 Summer Study on Energy Efficiency in buildings. Florida Solar Energy
Press, Washington, DC, USA. Center. Lawrence Berkley National Laboratory, Berkeley, CA, USA.
NETL, 2008: National Energy Technology Laboratory Advance Metering Infrastructure, Passivehaus Institut, 2009: Passive House Institute US. www.passivehouse.us/pas-
Office of Electricity Delivery and Energy Reliability, U.S. Department of Energy siveHouse/PHIUSHome.html (accessed August 2, 2010).
(US DOE), Washington, DC, USA. Pavan, M., 2008: Not Just Energy Savings: Emerging Regulatory Challenges from
Nevius, M, R. Eldridge, and J. Krouk 2010: The State of the Efficiency Program the Implementation of Tradable White Certificates. In Proceedings of the 2008
Industry Budgets, Expenditures, and Impacts 2009. Consortium of Energy American Council for an Energy Efficiency Economy (ACEEE) Summer Study on
Efficiency (CEE), Boston, MA, USA. Energy Efficiency in Buildings, August, 2008, Washington, DC.
Nilsson, l., 2006: Evaluation of BELOK-procurement group for commercial CBD, 2001: The value of ecosystems. Convention on Biological Diversity, CBD Technical
buildings(Sweden),EIE-2003–114, Active Implementation for the European Series No. 4, Convention on Biological Diversity (CBD), Montreal, Canada.
Directive on Energy Efficiency (AID-EE), Intelligent Energy-Europe, Brussels, Peters, G. P., C. L. Weber, D. Guan, and K. Hubacek, 2007: China’s growing
Belgium. CO2 emissions-a race between increasing consumption and efficiency gains.
Niu, J. L., L. Z. Zhang, and H. G. Zuo, 2002: Energy savings potential of chilled- Environmental Science & Technology, 41(17): 5939–5944.
ceiling combined with desiccant cooling in hot and humid climates. Energy and Petersdorff, C., T. Boermans, J. Harnisch, O. Stobbe, S. Ullrich, and S. Wartmann,
Buildings, 34(5): 487–495. 2005a: Cost-Effective Climate Protection in the EU Building Stock. Report
Nordman, B. and K. Christensen, 2010: The next step in reducing IT energy use. established by ECOFYS, Utrect, the Netherlands, for the European Insulation
Green IT column. IEEE Computer, 43(1): 91–93. Manufacturers Association (EURIMA), Brussels, Belgium.
Novikova, A., 2010: Methodologies for Assessment of Building’s Energy Efficiency Petersdorff, C., T. Boermans, S. Joosen, I. Kolacz, B. Jakubowska, M. Scharte,
and Conservation: A Policy-Maker View. DIW Berlin, Working Paper. German O. Stobbe, and J. Harnisch, 2005b: Cost-Effective Climate Protection in
Institute for Economic Research (DIW-Berlin). Berlin, Germany. the Building Stock of the New EU Member States: Beyond the EU Energy
Oak Ridge National Laboratory, 2001: Improving the methods used to evaluate Performance of Buildings Directive. Report established by ECOFYS, Utrect, the
voluntary energy efficiency. Programs Report, US Department of Energy (US Netherlands, for the European Insulation Manufacturers Association (EURIMA),
DOE) and US Environmental Protection Agency (US EPA), Washington, DC, USA. Brussels, Belgium,
755
Energy End-Use: Buildings Chapter 10
Piette, M. A., S. K. Kinney, and P. Haves, 2001: Analysis of an information monitor- Roudil, N., 2007: Artisans et énergies renouvelables: une chaîne d’acteurs au cœur
ing and diagnostic system to improve building operations. Energy and Buildings, d’une situation d’innovation. Les Annales de la Recherche Urbaine. Ministère
33: 783–791. de l’Ecologie, du Développement et de l’Aménagement Durables (MEDAD),
Platts Research and Consulting, 2004: Hedging Energy Price Risk with Renewables 103:101–111, Paris, France.
and Energy Efficiency, New York, NY, USA. Roux, C., 2010: The Life Cycle Performance of Energy Using Household Products.
Pollitt, 2008: Electricity reform in Argentina: lessons for developing countries. Energy Department of Energy and Process Engineering, Norwegian University of Science
Economics, 30(4): 1536–1567. and Technology, Trondheim, Norway.
Porta-Gándara, M. A., E. Rubio, and J. L. Fernández, 2002: Economic feasibility of Roy, J., 2000: The rebound effect: some empirical evidence from India. Energy Policy,
passive ambient comfort in Baja California dwellings. Building and Environment, 28(6–7): 433–438.
37(10): 993–1001. Roy, A. N., A. R. Mahmood, O. Baslev-Olesen, S. Lojuntin, C. K. Tang, and K. S.
Power, M., 2006: Fuel poverty in the USA: the overview and the outlook. Energy Kannan, 2005: Low Energy Office Building in Putrajaya, Malaysia. Case studies
Action, 98. and innovations. In Proceedings of Conference on Sustainable Building South
Quinlan, P., H. Geller, and S. Nadel, 2001: Tax incentives for innovative energy- Asia.11–13, Kuala Lumpur, Malaysia, pp.223–230.
efficient technologies (Updated). Report Number E013, American Council for an Rubel, F. and M. Kottek, 2010: Observed and projected climate shifts 1901–
Energy Efficient Economy (ACEEE), Washington, DC, USA. 2100 depicted by world maps of the Köppen-Geiger climate classification.
Rajvanshi, A. K., S. M. Patil, and B. Mendonca, 2007: Low concentration ethanol Meteorologische Zeitschrift, 19:135–141.
stove for rural areas of India. Energy for Sustainable Development, 11(1):63–68. Rubinstein, F. and S. Johnson, 1998: Advanced Lighting Program Development.
Ramesh, T., R. Prakash, and K. K. Shukla, 2010: Life cycle energy analysis of build- Final Report, Lawrence Berkeley National Laboratory, Berkeley, CA, USA.
ings: an overview. Energy and Buildings, 42(10): 1592–1600. Rubinstein, F., H. J. Jennings, and D. Avery, 1998: Preliminary Results from an
Rapoport, A., 1969: House Form and Culture. Prentice-Hall, Englewood Cliffs, N.J. Advanced Lighting Controls Testbed. LBNL-41633, Lawrence Berkeley National
Reinhart, C. F., 2002: Effects of Interior Design on the Daylight Availability in Open Laboratory, Berkeley, CA, USA.
Plan Offices. In Proceedings of the 2002 American Council for an Energy Efficient Rudd, A., P. Kerrigan, Jr., and K. Ueno, 2004: What will it take to reduce total resi-
Economy (ACEEE) Summer Study on Energy Efficiency in Buildings, vol. 3., dential source energy use by up to 60%? In Proceedings of the 2004 American
Washington, DC, USA, pp. 309–322. Council for an Energy Efficient Economy (ACEEE) Summer Study on Energy
Reiss, P. and M. White, 2008: What changes energy consumption? Prices and public Efficiency in Buildings.Vol.1, Washington, DC, USA, pp.293–305.
pressures. The RAND Journal of Economics, 39(3): 636–663. Rypdal, K., N. Rive, S. Aström, N. Karvosenoja, K. Aunan, J. L. Bak, K. Kupiainen,
Ricci, A., 2009: Policy use of the needs results. New Energy Externalities Developments and J. Kukkonen, 2007: Nordic air quality co-benefits from European post-
for Sustainability (NEEDS), Rome, Italy. 2012 climate policies. Energy Policy,35(12)6309–6322.
Rivière, A, L. Grignon-Masse, S. Legendre, D. Marchio, G. Nermond, S. Rahim, Sadler, R., 2002: The Benefits of Energy Advice. Energy Efficiency Partnership for
P. Riviere, P. Andre, L. Detroux, J. Lebrun, J. L’hoest, V. Teodorose, J.L. Homes (EEPH), London, UK.
Alexandre, E. SA, G. Benke, T. Bogner, A. Conroy, R. Hitchin, c. Pout, W. Sailor, D.J. 2008: A green roof model for building energy simulation programs. Energy
Thorpe and S. Karatasou, 2008: Preparatory study on the environmental per- and Buildings, 40: 1466–1478.
formance of residential room conditioning appliances (airco and ventilation), Saiz, S., Kennedy, C., Bass, B., Pressnail, K., 2006: Comparative Life Cycle
Tasks 1 to 5. Draft reports as of July 2008, Directorate-General for Energy, Assessment of Standard and Green Roofs. Environmental Science and
European Commission, Brussels, Belgium. Technology, 40: 4312–4316.
Roberts, S., 2008: Energy, equity and the future of the fuel poor. Energy Policy, Samet, J., S. Zeger, F. Dominici, F. Curriero, I. Coursac, D.W. Dockery, J. Schwartz,
36(12): 4471–4474. and A. Zanobetti, 2000: The national morbidity, mortality, and air pollution
Roberts, S. and W. Baker, 2003: Towards Effective Energy Information: Improving study – part II: morbidity and mortality from air pollution in the United States.
Consumer Feedback on Energy Consumption. A report to Ofgem. Center for Research Report Health Effects Institute, 94(Part 2):5–70.
Sustainable Energy, Bristol, UK. Sami Khawaja, M. et al., 2008: Statewide Codes and Standards Market Adoption and
Romieu, I., H. Riojas-Rodriguez, A. T. Marrón-Mares, A. Schilmann, R. Perez- Noncompliance Rates. Final Report CPUC Program, No. 1134–04, SCE0224.01,
Padilla, and O. Masera, 2009: Improved biomass stove intervention in rural San Francisco, CA, USA.
Mexico: Impact on the respiratory health of women. American Journal of Sanstad, A. H., C. Blumstein, and S. Stoft, 1995: How high are option values in
Respiratory and Critical Care Medicine, 180(7): 649–656. energy-efficiency investments? Energy Policy, 23(9): 739–744.
Rosenfeld, A. H., H. Akbari, J. J. Romm, and M. Pomerantz, 1998: Cool com- Santamouris, M., 2001: Energy and Climate in the Urban Built Environment, James
munities: strategies for heat island mitigation and smog reduction. Energy and and James, London, UK.
Buildings, 28(1): 51–62. Santamouris, M., Pavlou, C, Doukas, P., Mihalakakou, G., Synnefa, A., Hatzibiros,
Roth, K. W., F. Goldstein, and J. Kleinman, 2002: Energy Consumption by Office A., Patargias, P., 2007: Investigation and analysing the energy and environ-
and Telecommunications Equipment in Commercial Buildings. Volume 1: Energy mental performance of an experimental green roof system installed in a nursery
Consumption Baseline. Arthur D. Little Inc., Cambridge, MA, USA. school building in Athens, Greece. Energy, 32: 1781–1788.
Roth, K.W., D. Westphalen, and J. Brodrick, 2003: Saving energy with building Sartori, I. and A. G. Hestnes, 2007: Energy use in the life cycle of conventional and
commissioning. ASHRAE Journal, 45(11):65–66. low-energy buildings: A review article. Energy & Buildings, 39(3): 249–257.
756
Chapter 10 Energy End-Use: Buildings
Sathaye, J. and A. Gupta, 2010: Eliminating Electricity Deficit through Energy Shorrock, L., 2001: Assessing the effect of grants for home energy efficiency
Efficiency in India: An Evaluation of Aggregate Economic and Carbon Benefits, improvements. In Proceedings of the European Council for an Energy Efficient
LBNL-3381E, Lawrence Berkeley National Laboratory, Berkeley, CA, USA. Economy (ECEEE) Summer Study.11–16 June 2001, Mandelieu, France.
Savola, H., 2007: International Institute for Industrial Environmental Economics Singer, T., 2002: IEA DSM Task X- Performance Contracting- Country Report: United
(IIIEE), Lund, Sweden. Email communication, contribution by filling out the ques- States. International Energy Agency (IEA), Paris, France.
tionnaire for several evaluation studies in Swedish, sent on May 7, 2007. Skumatz, L.A. and C. A. Dickerson, 1997: Recognizing All Program Benefits:
SBTF, 2001: Building Better Buildings: A Blueprint for Sustainable State Facilities. Estimating the Non-Energy Benefits of PG and E’s Venture Partner Pilot Program
California State and Consumer Services Agency and Sustainable Building Task (VPP).In Energy Evaluation Conference, Chicago, IL, USA.
Force (SBTF), Sacramento, CA, USA. Small, K. and K. Van Dender, 2005: A Study to Evaluate the Effect of Reduced
Schaefer, C., C. Weber, H. Voss-Uhlenbrock, A. Schuler, F. Oosterhuis, E. Greenhouse Gas Emissions on Vehicle Miles Traveled. Sacramento: State of
Nieuwlaar, R. Angioletti, E. Kjellsson, S. Leth-Petersen, M. Togeby, and California Air Resources Board.
J. Munksgaard, 2000: Effective Policy Instruments for Energy Efficiency in Smeds, J. and M. Wall, 2007: Enhanced energy conservation in houses through high
Residential Space Heating – an International Empirical analysis. University of performance design. Energy and Buildings, 39: 273–278.
Stuttgart, Institute for Energy, Stuttgart, Germany. Smith, K.R., R. Edwards, K. Shields, R. Bailis, K. Dutta, C. Chengappa, O. Masera,
Schiellerup, P. and J. Gwilliam, 2009: Social production of desirable space: an and V. Berrueta, 2007: Monitoring and evaluation of improved biomass cook-
exploration of the practice and role of property agents in the UK commercial stove programs for indoor air quality and stove performance: conclusions from
property market. Environment and Planning C: Government and Policy, 27(5): the household energy and health project. Energy for Sustainable Development,
801–814. 11(2): 5–18.
Schipper, L. and M. Grubb, 2000: On the rebound? Feedback between energy inten- Smith-Sivertsen, T., E. Díaz, D. Pope, R.T. Lie, A. Díaz, J. McCracken, P. Bakke, B.
sities and energy uses in IEA countries. Energy Policy, 28(6–7): 367–388. Arana, K. R. Smith, and N. Bruce, 2010:Effect of reducing indoor air pollution
Schlomann, B., W. Eichhammer, and E. Gruber, 2001: Labelling of electrical on women’s respiratory symptoms and lung function: the RESPIRE Randomized
appliances – an evaluation of the Energy Labelling Ordinance in Germany and Trial, Guatemala. Am. J. Epidemiol, 170(2): 211–220.
resulting recommendations for energy efficiency policy. In Proceedings of the Socolow, R. H., 1978: Saving energy in the home: Princeton’s experiments at Twin
European Council for an Energy Efficient Economy (ECEEE) Summer Study.11– Rivers. Ballinger Press, Cambridge, MA, USA.
16 June 2001, Mandelieu, France. SOM, 2010: Lever House – Curtain Wall Replacement. Skidmore, Owings & Merrill
Schmidt, T., D. Mangold and H. Muller-Steinhagen, 2004: Central solar heating LLP, New York, NY, USA. www.som.com/content.cfm/lever_house_curtain_wall_
plants with seasonal storage in Germany. Solar Energy, 76(1–3):165–174. replacement (accessed 22 September, 2010).
Schnieders, J. and A. Hermelink, 2006: CEPHEUS results: Measurements and occu- Sondreal, E., M. Jones, and G. Groenewold, 2001: Tides and trends in the world’s
pants satisfaction provide evidence for Passive Houses being an option for sus- electric power industry. The Electricity Journal, 14(1): 61–79.
tainable building. Energy Policy, 34(2): 151–171. Sorrell S., E. O’Malley, J. Schleich, and S. Scott, 2004: The Economics of Energy
Schonborn, M., 2008: Energy efficiency for residential buildings. Presentation at Efficiency. Edward Elgar Pub, Cheltenham, UK.
London School of Economics, December, 2008. London, UK. Sorrell, S., 2007: The Rebound Effect: An Assessment of the Evidence for Economy-
Schweitzer, M. and B. Tonn, 2002: Nonenergy benefits from the weatherization Wide Energy Savings from Improved Energy Efficiency. UK Energy Research
assistance program: A summary of findings from the recent literature. Prepared Centre (UK ERC), London, UK.
for US Department of Energy, Oak Ridge National Laboratory, Oak Ridge, TN, Spala, A., Bagiorgas, H.S., Assimakopoulos, M.N., Kalavrouziotis, J.
USA. Matthopoulos, D., Mihalakakou, G., 2008: On the green roof system.
Scott, S., 1996: Social welfare fuel allowances…to heat the sky? Working Paper No. Selection, state of the art and energy potential investigation of a system installed
74. The Economic and Social Research Institute (ESRI), Dublin, Ireland. in an office building in Athens, Greece, Renewable Energy, 33: 173–177.
Scott, S., S. Lyons, C. Keane, D. McCarthy, and R.S.J. Tol, 2008: Fuel Poverty in Springer, D., G. Loisos, and L. Rainer, 2000: Non-compressor cooling alternatives
Ireland: Extent, Affected Groups and Policy Issues. Working Paper No. 262. for reducing residential peak load. In Proceedings of the 2000 American Council
Prepared by the Economic and Social Research Institute (ESRI), Dublin, Ireland. for an Energy Efficient Economy (ACEEE)Summer Study on Energy Efficiency in
Sekhar, S. C. and K. J. Phua, 2003: Integrated retrofitting strategy for enhanced Buildings.Vol.1., Washington, DC, pp.319–330.
energy efficiency in a tropical building. ASHRAE Transactions, 109(1): 202–214. Stern, P.C., 1999: Information, incentives and pro-environmental consumer behav-
Seppanen, O. A., W. J. Fisk, and M. J. Mendell, 1999: Association of ventilation iour. Journal of Consumer Policy, 22 (4): 461–478.
rates and CO2 concentrations with health and other human responses in com- Stetiu, C., and H. E. Feustel, 1999: Energy and peak power savings potential of
mercial and institutional buildings. Indoor Air, 9(4): 226–52. radiant cooling systems in US commercial buildings. Energy and Buildings 30(2):
Sevi, B., 2004: Consequences of electricity restructuring on the environment: a 127–138.
survey.Technical Paper. Centre de Recherche en Economie et Droit de l’Energie Still, D., 2009: New Biomass Stoves and Carbon Credits. Aprovecho Research Center,
(CREDEN), Montpellier Cedex, France. Cottage Grove, OR, USA.
Shepherd, D. and A. Zacharakis, 2001: The venture capitalist-entrepreneur relation- Summerfield, A.J., R.J. Lowe, and T. Oreszczyn, 2010: Two models for bench-
ship: control, trust and confidence in co-operative behaviour. Venture Capital: An marking UK domestic delivered energy. Building Research &Information38 (1):
International Journal of Entrepreneurial Finance, 3(2): 129–149. 12–24.
757
Energy End-Use: Buildings Chapter 10
Stoecklein, A. and L. Skumatz, 2007: Zero and low energy homes in New Zealand: UNEP, 2009: Common Carbon Metric for Measuring Energy Use and Reporting
the value of non-energy benefits and their use in attracting homeowners. In Greenhouse Gas Emissions from Building Operations, United Nations
Proceedings for the European Council for an Energy Efficient Economy (ECEEE) Environment Programme (UNEP), Sustainable Buildings and Climate Initiative
Summer Study.4–9 June, La Colle sur Loup, France. (SCBI), Paris, France.
Sverrisson, F., J. Li, M. Kittell, and E. Williams, 2003: Electricity restructuring and UNFCCC, 2002: AIJ project reports to the United Nations Framework Convention
the environment: lessons learned in the United States, Center for Clean Air on Climate Change (UNFCCC), http://unfccc.int/program/coop/aij/aijproj.html.
Policy, Washington, DC, USA. (accessed 10 February, 2010).
Swanson, R. M., 2006: A vision for crystalline silicon photovoltaics. Progress in Unruh, G. C., 2000: Understanding carbon lock-in. Energy Policy, 28(12): 817–830.
Photovoltaics: Research and Applications, 14(5): 443–453. Ürge-Vorsatz, D. and S. Koeppel, 2007: An assessment of Energy Service Companies
Szklo, A. and H. Geller, 2006: Policy Options for Sustainable Energy Development. worldwide. Report submitted to the World Energy Council (WEC), London, UK.
In Brazil: A Country Profile on Sustainable Energy Development. International Ürge-Vorsatz, D., S. Koeppel, and S. Mirasgedis, 2007: An appraisal of pol-
Atomic Energy Agency (IAEA), Vienna, Austria. icy instruments for reducing buildings’ CO2 emissions. Building Research and
Takebayashi, H., and M. Moriyama, 2007: Policy Options for Sustainable Energy Information, 35(4): 458–477.
Development. Building and Environment, 42(8): 2971–2979. Ürge-Vorsatz, D., A. Telegdy, S. Fegyverneki, D. Arena, S. Tirado Herrero, and
Taylor, R., C. Govindarajalu, J. Levin, A. S. Meyer, and W. A. Ward, 2008: Financing A.C. Butcher, 2010: Employment Impacts of a Large-Scale Deep Building Energy
Energy Efficiency: Lessons from Brazil, China, India, and Beyond. World Bank, Retrofit Programme in Hungary. Prepared by the Center for Climate Change and
Washington, DC, USA. Sustainable Energy Policy (3CSEP) of Central European University on behalf of
Tenorio, R., 2007: Enabling the hybrid use of air conditioning: a prototype on sustain- the European Climate Foundation. Budapest, Hungary.
able housing in tropical regions. Building and Environment, 42(2): 605–613. Ürge-Vorsatz, D., K. Petrichenko, A. Butcher, and M. Sharmina, in preparation:
Thompson, P., 1997: Evaluating energy efficiency investments: accounting for risk in World Building Energy Use and Scenario Modeling. Prepared for United Nations
the discounting process. Energy Policy, 25(12): 989–996. Environmental Programme, the Sustainable Buildings and Climate Initiative,
Thiers, S., and B. Peuportier, 2008: Thermal and environmental assessment of a Paris, France and the International Institute for Applied Systems Analysis (IIASA),
passive building equipped with an earth-to-air heat exchanger in France. Solar Laxenburg, Austria
Energy, 82(9): 820–831. Ürge-Vorsatz, D., E. Wojcik-Gront, S. Tirado Herrero, P. Foley et.al. In prep-
Tirado Herrero, S. and D. Ürge-Vorsatz, 2010: Fuel poverty in Hungary. A first aration: Employment Impacts of a Large Scale Deep Building Energy Retrofit
assessment. Center for Climate Change and Sustainable Energy Policy (3CSEP), Programme in Poland. Prepared by the Center for Climate Change and
Central European University, Budapest, Hungary. Sustainable Energy Policy (3CSEP) of Central European University, Budapest,
Tirado Herrero, S., in preparation: Fuel poverty in Hungary: Assessing the co-bene- in collaboration with FEWE (Polish Foundation for Energy Efficiency) for the
fits of residential energy efficiency. PhD dissertation. Center for Climate Change European Climate Foundation, the Hague, the Netherlands.
and Sustainable Energy Policy (3CSEP), Central European University, Budapest, US Census, 2000: Population. www.allcountries.org/uscensus/2_population.html
Hungary (accessed December 31, 2010).
Tochihara, Y., 1999: Bathing in Japan: A review. Journal of Human-Environment US Census Bureau, 2008: Annual Estimates of the Resident Population for the
System, 3(1): 27–34. United States, Regions, States, and Puerto Rico: April 1, 2000 to July 1, 2008.
Torcellini, P. A., R. Judkoff, and S. J. Hayter, 2002: Zion National Park Visitor Center: www.census.gov/popest/states/tables/NST-EST2008–01.xls.
Significant energy savings achieved through a whole-building design process. US DOE, 2008: 2008 Buildings Energy Data Book. Report prepared for the Buildings
In Proceedings of the 2002 American Council for an Energy Efficient Economy Technologies Program, Office of Energy Efficiency and Renewable Energy, United
(ACEEE) Summer Study on Energy Efficiency in Buildings, Vol. 3., Washington, States Department of Energy by D and R International, Ltd., Washington, D.C.
D.C., pp.361–372. US DOE, 2010: Summary of Gaps and Barriers for Implementing Residential Buildings
Torcellini, P. A. and D. B. Crawley, 2006: Understanding zero-energy buildings. Energy Efficiency Strategies. Report prepared by the National Renewable Energy
ASHRAE Journal, 48(9): 62–69. Laboratory for the United States Department of Energy (US DOE) Building
Torras, M., 2000: The total economic value of Amazonian deforestation, 1978–1993. Technologies, Washington D.C.
Ecological Economics, 33(2): 283–297. US EIA, 2005: Residential Energy Consumption Survey. U.S. Energy Information
Treloar, G., R. Fay, P. E. D. Love, and U. Iyer-Raniga, 2000: Analysing the life- Administration (US EIA), Washington, DC, USA. http://www.eia.doe.gov/emeu/
cycle energy of an Australian residential building and its householders. Building recs/contents.html (accessed 2009/2010).
Research and Information, 28(3): 184–195. US EIA, 2008: Annual Energy Review. Energy consumption by Sector 1949–2008.
Ueno, T., F. Sano, O. Saeki, and K. Tsuji, 2006: Effectiveness of an energy-con- United States Energy Information Administration (US EIA), Washington, DC, USA.
sumption information system on energy savings in residential houses based on US EIA, 2010: Annual Energy Outlook. United States Energy Information
monitored data. Applied Energy, 83(2): 166–183. Administration (US EIA), Report #: DOE/EIA-0383(2010), Washington, DC, USA.
UKERC, 2009: Making the Transition to a Secure and Low-Carbon Energy System: US EIA, 2011: State Energy Consumption Database, June 2011 for 1980–2009. U.S.
Synthesis Report prepared by the UK Energy Research Centre (UKERC), London, UK. Energy Information Administration (US EIA), Washington, DC, USA.
UNIDO, 2003: Bundling small-scale energy efficiency projects: Issue Paper, United US EIA, 2012: Annual Energy Outlook 2012 Early Release, Jan. 2012, Summary Reference
Nations Industrial Development Organization (UNIDO), Vienna, Austria. Case. U.S. Energy Information Administration (US EIA), Washington, DC, USA.
758
Chapter 10 Energy End-Use: Buildings
US EPA, 1991: Indoor Air Facts No. 4 (revised) Sick Building Syndrome. Air and Wang, U., 2008: Building a Cool World, With New Roofs. Greentechmedia. www.
Radiation Research and Development (6609J). United States Environmental greentechmedia.com/articles/read/building-a-cool-world-with-new-roofs-5438/
Protection Agency (US EPA), Washington, DC, USA. (accessed June 27, 2010).
US EPA, 2003: Energy Star: The Power to Protect the Environment Through Energy Warren, A., 2007: Taxation. Presentation at the Energy Efficiency in Buildings (EEB) Forum.
Efficiency. United States Environmental Protection Agency (US EPA), EPA 430-R- Driving Investments for Energy Efficiency in Buildings. July 5, Brussels, Belgium.
03–008. Washington, DC, USA. WB, 2008: Global Environment Facility and World Bank Donate US$15 Million to
US EPA, 2007: Energy Star: New Specifications for Many Office Products in 2007. Support Energy Efficiency In Argentina, Press Release No: 2008/212/LCR, World
United States Environmental Protection Agency (US EPA), Washington, DC, USA. Bank, Washington, DC, USA.
www.energystar.gov/index.cfm?c=ofc_Equip.pr_office_Equipment. (Accessed WBCSD, 2007: Energy Efficiency in Buildings: Business Realities and Opportunities.
12 May, 2010). Report prepared by the World Business Council for Sustainable Development
US EPA, 2011: Fans, Ceilings for Consumers. URL: www.energystar.gov/index. (WBCSD), Geneva, Switzerland.
cfm?fuseaction=find_a_product.showProductGroup8pgw_code=CF. (Accessed WBCSD, 2008: Energy Efficiency in Buildings: Business Realities and Opportunities.
5 January, 2011) Report prepared by the World Business Council for Sustainable Development
Usibelli, T., 1997: The Washington State Energy Code: The Role of Evaluation in (WBCSD), Geneva, Switzerland.
Washington State’s Non-Residential Energy Code. Washington State University WBCSD, 2009: Energy Efficiency in Buildings – Transforming the Market. Report pre-
Cooperative Extension Energy Program, WSU/EEP 97–007, Pullman, WA, USA. pared by the World Business Council for Sustainable Development (WBCSD),
van Houwelingen, J. and F.W. van Raaij, 1989: The effect of goal setting and Geneva, Switzerland.
daily electronic feedback on in-home energy use. Journal of Consumer Research, WEA, 2000: World Energy Assessment Energy and the Challenge of Sustainability.
16(1): 98–105. United Nations Development Programme (UNDP), United Nations Department
van Vuuren, D.P., J. Cofala, H. E. Eerens, R. Oostenrijk, C. Heyes, Z. Klimont, M. of Economic and Social Affairs (UNDESA), New York, NY, USA, and World Energy
G. J. den Elzen, and M. Amann, 2008: Exploring the ancillary benefits of the Council (WEC), London, UK.
Kyoto Protocol for air pollution in Europe. Energy Policy, 34(2006): 444–460. WEA, 2004: World Energy Assessment, Energy and the Challenge of Sustainability,
van Wie McGrory, L., J. Harris, M. Breceda Lapeyre, S. Campbell, S. Constantine, Overview2004 Update. United Nations Development Programme (UNDP),
M. della Cava, J. G. Martínez, S. Meyer, and A. M. Romo, 2002: Market United Nations Department of Economic and Social Affairs (UNDESA), New York,
Leadership by Example: Government Sector Energy Efficiency in Developing NY, USA, and World Energy Council (WEC), London, UK.
Countries. In Proceedings of the 2002 American Council for an Energy Efficient Webber, C., R. Brown, M. McWhinney, and J. Koomey, 2003: 2002 Status Report:
Economy (ACEEE) Summer Study. Report LBNL-5098, Asilomar, CA, USA. Savings Estimates for the ENERGY STAR Voluntary Labeling Program. Lawrence
Vasile, C. F., 1997: Residential Waste Water Heat Recovery System: GFX. Center for Berkeley National Laboratory, LBNL-51319, Berkeley, CA, USA.
the Analysis and Dissemination of Demonstrated Energy Technologies (CADDET) Weber, C. L., 2009: Energy Cost of Living Calculation, personal communication,
newsletter, December 4, 1997. January 6, 2009.
Venkatataraman, C., and S. Maithel, 2007: Advanced Biomass Energy Technology WEC, 2001: Energy Efficiency Policies and Indicators. World Energy Council (WEC),
for cooking. DACE Workshop, October 12–13, 2007, Mumbai, India. London, UK.
Viridén, K., T. Ammann, P. Hartmann, and H. Huber, 2003: P+D – Projekt WEC, 2004: Energy Efficiency: A Worldwide review. Indicators, Policies, Evaluation.
Passivhaus im Umbau (in German), Viriden + Partner, Zürich, Switzerland World Energy Council (WEC), London, UK.
Vojdani, A., 2008: Smart Integration. Power and Energy Magazine, IEEE6 (6): Wei, Y. M., L. C. Liu, Y. Fan, and G. Wu, 2007: The impact of lifestyle on energy
71–79. use and CO2 emission: An empirical analysis of China’s residents. Energy Policy,
Voss, K., 2000: Solar energy in building renovation – results and experience 35(1): 247–257.
of international demonstration buildings. Energy and Buildings, 32(3): Western Regional Air Partnership, 2000: Air Pollution Prevention Meeting
291–302. Summary. In Air Pollution Prevention Forum Meeting, May 31-June 1, San
Voss, K., S. Herkel, J. Pfafferott, G. Löhnert, and A. Wagner, 2007: Energy efficient Francisco, CA, USA.
office buildings with passive cooling – results and experiences from a research WHO, 2000: Development of World Health Organisation (WHO) Guidelines for Indoor Air
and demonstration programme. Solar Energy, 81(3): 424–434. Quality. Report on a Working Group Meeting, October 23–24, 2006, Bonn, Germany.
Wade, J., W. Wiltshire, and I.Y. Scrase, 2000: National and Local Employment WHO, 2007: Housing, energy and thermal comfort. A review of 10 countries within
Impacts of Energy Efficiency Investment Programmes. Vol.1: Summary Report. the WHO European Region. World Health Organization (WHO).Regional Office
SAVE contract XVII/4.1031/D/97–032, Association for the Conservation of for Europe, Copenhagen, Denmark
Energy, London, UK. WHO, 2008: World Health Organization (WHO) Statistics 2008 – quote on COPD’s
Wagner, A., S. Herkel, G. Löhnert, and K. Voss, 2004: Energy efficiency in com- www.who.int/respiratory/copd/World_Health_Statistics_2008/en/ (accessed
mercial buildings: Experiences and results from the German funding program February 25, 2010).
SolarBau. Presented at EuroSolar 2004, Freiburg, Germany. WHO, 2009: The Energy Access Situation in Developing Countries. A Review focus-
Walker, C. E., L. R. Glicksman and L.K. Norford, 2007: Tale of two low-energy ing on the Least Developing Countries and Sub-Saharan Africa. United Nations
designs: Comparison of mechanically and naturally ventilated office buildings in Development Programme (UNDP), New York, NY, USA, and World Health
temperate climates. ASHRAE Transactions, 113 (Part 1): 36–50. Organisation (WHO), Geneva, Switzerland.
759
Energy End-Use: Buildings Chapter 10
Wilhite, H., H. Nakagami, T. Masuda, Y. Yamaga, and H. Haned, 1996: A cross-cul- Yang, J., Q. Yu, and P. Gong, 2008: Quantifying air pollution removal by green roofs
tural analysis of household energy use behaviour in Japan and Norway. Energy in Chicago. Atmospheric Environment, 42(31): 7266–7273.
Policy, 24(9): 795–803. Yeang, K., 1994: Bioclimatic Skyscrapers. Ellipsis, London, UK.
Wilhite, H., and R. Ling, 1995: Measured energy savings from a more informative Yonehara, T., 1998: Ventilation windows and automatic blinds help to control heat
energy bill. Energy and Buildings, 22(2): 145–155. and lighting. CADDET Energy Efficiency Newsletter, December 1998: 9–11.
Williams, E., 2004: Energy intensity of computer manufacturing: Hybrid assessment York, D., 2008: What’s working well: lessons from a national review of exemplary
combining process and economic input-output methods. Environmental Science energy efficiency programs. In Proceedings of the American Council for an
and Technology, 38(22): 6166–6174. Energy Efficient Economy (ACEEE), Asilomar, CA, USA.
Wilson, A. and J. Boehland, 2005: Small is beautiful: US house size, resource use, Yoshino, H., F. Hasegawa, H. Arai, K. Iwasaki, S. Akabayashi, and M. Kikuta,
and the environment. Journal of Industrial Ecology, 9(1–2):277–287. 1985: Investigation of the relationship between the indoor thermal environ-
Winner, L., 1977: Autonomous Technology. MIT Press, Boston, MA. ment of houses in the winter and cerebral vascular accident (CVA). Japanese
Winther, B. N. and A. G. Hestnes, 1999: Solar versus green: the analysis of a Journal of Public Health, 32(4).
Norwegian row house. Solar Energy, 66(6): 387–393. Zhang, S., X. Yang, Y. Jiang, and Q. Wei, 2010: Comparative analysis of energy
Wiser, R., M. Bolinger, and M. St. Clair, 2005: Easing the Natural Gas Crisis: use in China building sector: current status, existing problems and solutions.
Reducing Natural Gas Prices through Increased Deployment of Renewable Frontiers of Energy and Power Engineering in China, 4(1).
Energy and Energy Efficiency. Testimony prepared for a hearing on Power Zhen, B., L. Shanhou, and Z. Weifeng, 2005: Energy efficient techniques and simula-
Generation Resource Inventive & Diversity Standards, Senate Committee tion of energy consumption for the Shanghai ecological building. In Proceedings
on Energy and Natural Resources, Lawrence Berkeley National Laboratory, 2005 World Sustainable Building Conference. September 27–29, Tokyo, Japan,
Berkeley, CA, USA. pp.1073–1078.
Withers, C. R. and J. B. Cummings, 1998: Ventilation, humidity, and energy impacts Zhivov, A. M., and A. A. Rymkevich, 1998: Comparison of heating and cooling energy
of uncontrolled airflow in a light commercial building. ASHRAE Transactions, consumption by HVAC system with mixing and displacement air distribution for
104(2): 733–742. a restaurant dining area in different climates. ASHRAE Transactions,104(part
Wong, N.H., Tay, S.F., Wong, R., Ong, C.L. Sia, A., 2003: Life cycle cost analyses of 2): 473–484.
rooftop gardens in Singapore, Building and Environment, 38: 499–509. Zhou, N., M. A. McNeil, D. Fridley, L. Jiang, L. Price, S. de la Rue du Can,
Wood, G. and M. Newborough, 2003: Dynamic energy-consumption indicators for J. Sathaye, and M. Levine, 2007: Energy Use in China: Sectoral Trends and
domestic appliances: environment, behaviour and design. Energy and Buildings, Future Outlook. Lawrence Berkeley National Laboratory Report LBNL-61904,
35(8): 821–841. Berkeley, CA, USA.
Yanbing, K. and W. Qingpeng, 2005: Analyses of the impacts of building energy effi- Zweibel, K., 2005: The Terawatt Challenge for Thin-Film PV. NREL Technical Report,
ciency policies and technical improvements on China’s future energy demand. NREL/TP-520–38350, National Renewable Energy Laboratory (NREL), Golden,
International Journal of Global Energy Issues, 24(3–4): 280–299. CO, USA.
760