Electronics Engineering Syllabus Sem VII Mumbai University

AC19.04.
2017
Item No. X.XX
UNIVERSITYOFMUMBAI
Revised syllabus (Rev- 2016) from Academic Year 2016 -17

Under
FACULTY OF TECHNOLOGY
Electronics Engineering
Second Year with Effect from AY 2017-18
Third Year with Effect from AY 2018-19
Final Year with Effect from AY 2019-20
As per Choice Based Credit and Grading System

with effect from the AY 2016–17
Programme Structure for Bachelor of Engineering (B.E.) – Electronics Engineering (Rev. 2016)
B.E. (Electronics Engineering) – Semester VII

Teaching Scheme
Credits Assigned
Course Code Course Name (Contact Hours)
Theory Practical Tutorial Theory Practical Tutorial Total
ELX701 Instrumentation System Design 04 -- --- 04 --- --- 04
ELX702 Power Electronics 04 -- --- 04 --- --- 04
ELX703 Digital signal processing 04 -- --- 04 --- --- 04
ELXDLO703X Department Level Optional course

04 -- --- 04 --- --- 04
III
ILO701X Institute Level Optional Course I# 03 --- --- 03 --- --- 03
ELXL701 Instrumentation System Design

02 01 --- 01
Lab.
ELXL702 Power Electronics Lab. 02 01 --- 01
ELXL703 Digital signal processing Lab. 02 01 --- 01
ELXL704 Project-I --- 06 --- --- 03 --- 03
ELXLDLO703 Dept. Level Optional course III

02 01 --- 01
X Lab.
TOTAL 19 14 --- 19 07 --- 26
Examination Scheme – Semester VII

Theory
Internal Assessment (IA) End Exam Term Oral
Course Code Course Name Test I Test II AVG. Sem Durati Work /Prac Total
Exam on
Marks (Hours
)
ELX701 Instrumentation System Design 20 20 20 80 03 --- --- 100
ELX 702 Power Electronics 20 20 20 80 03 --- --- 100
ELX 703 Digital signal processing 20 20 20 80 03 --- --- 100
ELXDLO703X Department Level Optional 20 20 20 80 03 --- --- 100

courses III*
ILO701X Institute Level Optional Subject 20 20 20 80 03 --- --- 100
ELXL701 Instrumentation System Design 25 25 50

Lab.
ELXL702 Power Electronics Lab. 25 25 50
ELXL703 Digital signal processing Lab. 25 25 50
ELXL704 Project-I --- --- --- --- --- 50 50 100
ELXLDLO703 Dept. Level Optional courses III 25 25 50

X Lab.
Total 100 100 100 400 15 150 150 800
University of Mumbai, B. E. (Electronics Engineering), Rev 2016 7

Programme Structure for Bachelor of Engineering (B.E.) – Electronics Engineering (Rev. 2016)
Course Code Department Level Optional Course III Course Code Institute Level Optional Course I#
ELXDLO7031 Neural Network and Fuzzy Logic ILO7011 Product Lifecycle Management
ELXDLO7032 Advance Networking Technologies ILO7012 Reliability Engineering
ELXDLO7033 Robotics ILO7013 Management Information System
ELXDLO7034 Integrated Circuit Technology ILO7014 Design of Experiments
ILO7015 Operation Research
ILO7016 Cyber Security and Laws
ILO7017 Disaster Management and Mitigation Measures
ILO7018 Energy Audit and Management
Course Code Department Level Elective Course IV Course Code Institute Level Elective Course II#
ELXDLO8041 Advanced Power Electronics ILO8021 Project Management
ELXDLO8042 MEMS Technology ILO8022 Finance Management
ELXDLO8043 Virtual Instrumentation ILO8023 Entrepreneurship Development and Management
ELXDLO8044 Digital Image Processing ILO8024 Human Resource Management
ILO8025 Professional Ethics and CSR
ILO8026 Research Methodology
ILO8027 IPR and Patenting
ILO8028 Digital Business Management
ILO8029 Environmental Management
University of Mumbai, B. E. (Electronics Engineering), Rev 2016 9

R2016[University of Mumbai B.E. Electronics Engineering]
B.E. (Electronics Engineering)
Teaching Scheme
Credits Assigned
ELX701 Instrumentation System Design 04 -- --- 04 --- --- 04
ELX702 Power Electronics 04 -- --- 04 --- --- 04
ELX703 Digital signal processing 04 -- --- 04 --- --- 04
Department Level Optional course

ELXDLO703X 04 -- --- 04 --- --- 04
III
ILO701X Institute Level Optional Course I# 03 --- --- 03 --- --- 03
Instrumentation System Design

ELXL701 02 01 --- 01
Lab.
ELXL702 Power Electronics Lab. 02 01 --- 01
ELXL703 Digital signal processing Lab. 02 01 --- 01
ELXL704 Project-I --- 06 --- --- 03 --- 03
ELXLDLO703 Dept. Level Optional course III

02 01 --- 01
X Lab.
TOTAL 19 14 --- 19 07 --- 26
Teaching Scheme
Credits Assigned
ELX801 Internet of Things 04 -- --- 04 --- --- 04
ELX 802 Analog and Mixed VLSI Design 04 -- --- 04 --- --- 04
Department Level Optional course

ELXDLO804X 04 -- --- 04 --- --- 04
IV
ILO802X Institute Level Optional course II# 03 --- --- 03 --- --- 03
ELX801 Internet of Things Lab. 02 01 --- 01
Analog and Mixed VLSI Design

ELXL802 02 01 --- 01
Lab.
ELXL803 Project-II --- 12 --- --- 06 --- 06
ELXLDLO804 Department Level Optional Courses

02 01 --- 01
X IV Lab.
TOTAL 15 18 --- 15 9 24
---
Teaching Scheme Credits Assigned

Course
Course Name Tutoria TW/Practica
Code Theory Practical Theory Tutorial Total
l l
Instrumentation
ELX 701 04 --- --- 04 --- --- 04
System Design
Examination Scheme
Course Theory Marks

Course Name Term Oral &
Code Internal Assessment (IA) End Semester Total
Work Practical
Test I Test II Average Examination
Instrumentation System
ELX 701 20 20 20 80 --- --- 100
Design (ISD)
Rationale :- For optimum operation & satisfactory performance of any industrial process control system, it is necessary to
have a reliably engineered system with a thorough knowledge of the process conditions & requirements as per the system or
design specifications. This subject introduces various nuances in the design of instrumentation systems, which is itself a
synergy of sensors, transducers, actuators, process control & electronic systems to achieve the desired operation of a plant or
the proper control of an industrial process. Students are exposed to principles of designing which enable them to design,
build & implement such electronically controlled systems for measurement, signal conditioning & final control.
Course Objectives :-
1. To learn basic functions & working of pneumatic, hydraulic & electrical components used in process control
2. To understand principles of process parameter conversion & transmission in various forms
3. To gain familiarity with control system components & their applications in process control
4. To study various types of controllers used in process control & their tuning for different applications
5. To be aware of recent advances & technological developments in industrial instrumentation & process control
Course Outcomes :-
At the end of the course, students should gain the ability to :-
 ELX 701.1 :- Demonstrate the needs of advancement in instrumentation systems

 ELX 701.2 :- Select the proper components for pneumatic & hydraulic systems
 ELX 701.3 :- Choose the transmitter / controller for given process application
 ELX 701.4 :- Analyze the controller parameters for discrete or continuous type
 ELX 701.5 :- Design the controller (electronic) for a given process or application
Modul Hour
Topics
e No. s
1 ACTUATORS & PROCESS CONTROL VALVES
1.1 Electrical actuators – relays, solenoids & electrical motors (DC, AC & stepper motor)
Pneumatic actuators – basic pneumatic system, pneumatic compressors (piston, vane, screw)
1.2 flapper nozzle, single & double acting cylinder, rotary actuator, filter-regulator-lubricator
(FRL) 08
Hydraulic actuator – hydraulic pumps, control valves types (globe, ball, needle, butterfly,
gate, diaphragm & pinch), cavitation & flashing with their remedies, pressure drop across
1.3 valve & leakage, valve noise, flow characteristics on load changes, control valves
parameters, control valves sizing, valve calibration, digital control valves, selecting control
valves & applications
2 DESIGN OF SIGNAL CONDITIONING CIRCUITS
Principles of analog & digital signal conditioning – signal level & bias change, linearization,
2.1
conversion, filtering & impedance matching, concept of loading, comparators & converters
Design of operational amplifier based circuits in instrumentation – analysis of voltage

divider circuits, bridge circuits, RC filters, inverting & non-inverting amplifier, 08
2.2
instrumentation amplifier, V to I & I to V converter, integrator, differentiator & linearization
(with numerical examples)
Transmitters – Introduction to telemetry & its basic block diagram, 2 wire, 3 wire & 4 wire
2.3 transmitters, 4 mA to 20 mA current transmitter, electronic transmitters for temperature,
level, pressure & flow, current to pressure (I to P) & pressure to current (P to I) converters
3 PROCESS CONTROLLER PRINCIPLES
3.1 Discontinuous controller – two position mode, multi-position mode & floating mode
Continuous controller – single mode (P, I & D) & composite mode (PD, PI & PID), split
3.2 range, auto select, ratio & cascaded controllers, selection criterion of controller for a process 08
mode
Tuning of PID controller – process loop tuning, open loop transient response method,
3.3 Ziegler – Nichols tuning method, frequency response methods (numerical examples on PID
tuning)
4 PROGRAMMABLE LOGIC CONTROLLERS (PLC)
Discrete state process controller – discrete state variables, process specifications & event
4.1
sequence description 10
Relay controller & ladder diagram – introduction to relay ladder diagram logic, ladder
4.2
diagram elements & ladder diagram programming examples
PLC – relay sequencers, programmable logic controller design, PLC operation,

4.3 programming the PLC, PLC software functions (application examples on relay ladder logic
programming)
5 DIGITAL BASED PROCESS CONTROL
Data acquisition system (DAS) – objectives, signal conditioning of inputs, single channel
5.1 DAS, multi-channel DAS, computer based DAS, data logger, difference between DAS &
data logger
Computer aided process control – architecture, human machine interface (HMI), supervisory 08
5.2
control & data acquisition (SCADA), standard interfaces (RS-232C, RS-422A & RS-485)
Supervisory control system (SCS), introduction to the Fieldbus & Profibus process
5.3 controlled networks, overview of distributed control system (DCS), features & advantages of
DCS
6 CALIBRATION STANDARDS & ADVANCES IN INSTRUMENTATION
PC & microcomputer based instrumentation, virtual instrumentation & LabVIEW

6.1
introduction
Calibration of instrumentation systems, representation of instrumentation control process

6.2 06
with SAMA & ISA symbols, ISO/IEC 17025 General requirements for calibration standards
Instrumentation standards, ISA S82.01 – Safety Standard for Electrical and Electronic Test,
Measuring, Controlling Related Equipment, ISA S84.01 – Application of Safety
6.3
Instrumented Systems for the Process Industries, ANSI/NEMA 250 – Enclosures for
Electrical Equipment
1–6 TOTAL 48
Recommended Books :-
1. Curtis D. Johnson, Process Control Instrumentation Technology, 7th edition, PHI
2. S. K. Singh, Industrial Instrumentation & Control, 3rd edition, McGraw Hill
3. B.C. Nakra & K. K. Chaudhary, Instrumentation Measurement & Analysis, 3rd edition, McGraw Hill
4. Andrew Parr, Pneumatics & Hydraulics, 2nd edition, Jaico Publishing Co.
5. B. G. Liptak, Handbook of Process Control & Instrumentation, 4th edition, CRC Press
6. William C. Dunn, Fundamentals of Industrial Instrumentation & Process Control, 1st edition, McGraw Hill
Internal Assessment (IA) :-Two tests must be conducted which should cover at least 80% of syllabus. The average marks
of both the tests will be considered as final IA marks.
End Semester Examination :-
1. Question paper will comprise of 6 questions, each carrying 20 marks.

2. The students need to solve total 4 questions.
3. Q.1 will be compulsory and based on entire syllabus.
4. Remaining questions (Q.2 to Q.6) will be set from all modules.
5. Weightage of each module in question paper will be proportional to the number of respective lecture hours mentioned in
the syllabus.

Subject Subject
Code Name Theory Practical Tutorial Theory Practical Tutorial Total
ELX702 Power 04 02 -- 04 -- -- 04
Electronics
ExaminationScheme
Theory Marks
Subject Subject Internal assessment
Code Name Term Practical
End Exam Oral Total
Avg of
Test 1 Sem. duration Work
Test 1 Test 2 and Exam Hours
Test 2
Power
ELX702 Electronics 20 20 20 80 03 -- -- -- 100
\Course Pre-requisite:
1. ENAS
2. EDC-1
3. EDC-2
Course Objectives:
1. To teach power electronic devices and their characteristics.

2. To highlight power electronics based rectifiers, inverters and choppers.
Course Outcomes:
After successful completion of the course students will be able to:
1. Discuss trade-offs involved in power semiconductor devices.

2. Design of triggering, commutation and protection circuits for SCRs.
3. Analyse different types of single-phase rectifiers and DC-DC converters.
4. Analyse different types of DC-AC converters (inverters).
5. Analyse different types of AC Voltage Controllers and Cycloconvertors.
Module Unit
Contents Hrs.
No. No.
Power semiconductor devices
Principle of operation of SCR, static and dynamic characteristics, gate

1.1
Characteristics,
1 8
Principle of operation, characteristics, ratings and applications of:
1.2 TRIAC, DIAC, MOSFET and power BJT. IGBT: basic structure, principle
of operation, equivalent circuit, latch-up in IGBT’s and V-I characteristics.
SCR: Triggering, commutation and Protection Circuits
Methods of turning ON SCR (types of gate signal), firing circuits (using R,

2.1
2 RC, UJT, Ramp and pedestal, inverse cosine), 8
2.2 Design of commutation circuits,
2.3 Protection of SCR

Single-phase Controlled Rectifiers
Introduction to uncontrolled rectifiers, Half wave controlled rectifiers with
3.1
R, RL load, effect of free-wheeling diode
Full wave fully controlled rectifiers (centre-tapped, bridge configurations),
3 3.2 full-wave half controlled (semi-converters) with R, RL load, effect of 8
freewheeling diode and effect of source inductance.
Calculation of performance parameters, input performance parameters
(input power factor, input displacement factor (DF), input current distortion
3.3
factors (CDF), input current harmonic factor (HF/THD), Crest Factor (CF)),
output performance parameters.
Inverters
4.1 Introduction to basic and improved series/parallel inverters, limitations.
4 Introduction, principle of operation, performance parameters of Single 10

4.2
phase half / full bridge voltage source inverters with R and R-L load,
Voltage control of single phase inverters using PWM techniques, harmonic

4.3
neutralization of inverters, applications
DC-DC converters
5.1 Basic principle of step up and step down DC-DC converters, DC-DC
5 switching mode regulators: Buck, Boost, Buck-Boost, Cuk Regulators 8
(CCM mode only)
5.2 Voltage commutated, current commutated and load commutated DC-DC
converters
5.3 Applications in SMPS, Battery charging systems.
AC Voltage Controllers and Cycloconvertors
6 Principle of On-Off control, principle of phase control, single phase 6

6.1
bidirectional control with R and RL load
6.2 Introduction, single phase and three phase Cyclo-converters, applications
Total 48
Recommended Books:
1. M. H. Rashid, “Power Electronics”, Prentice-Hall of India

2. Ned Mohan, “Power Electronics”, Undeland, Robbins, John Wiley Publication
3. P. S. Bhimbra, “Power Electronics”, Khanna Publishers, 2012
4. M.D. Singh and K. B. Khanchandani, “Power Electronics”, Tata McGraw Hill
5. Ramamurthy, “ Thyristors and Their Applications”
6. P. C. Sen, “Modern Power Electronics”, Wheeler Publication
7. S. Shrivastava, “Power Electronics”, Nandu Publication, Mumbai.
Internal Assessment (IA):
Two tests must be conducted which should cover at least 80% of syllabus. The average marks of both the tests
will be considered as final IA marks
End Semester Examination:

2. Total 4 questions need to be solved.
3. Question No.1 will be compulsory and based on entire syllabus wherein sub questions of 2 to 5 marks will be
asked.
4. Remaining questions will be selected from all the modules
Subject Subject Name Examination Scheme

Code Theory Marks Term Practical Oral Total
Internal Assessment End Work
Test 1 Test Ave. of Sem.
2 Test 1 and Exam
Test 2
EXC703 Digital Signal 20 20 20 80 -- -- -- 100
Processing
Prerequisite Courses: Signals and Systems

Course Objectives:
1. To teach the design techniques and performance analysis techniques of digital filters
2. To introduce the students to advanced signal processing techniques, digital signal processors and
applications
Course Outcomes:
After successful completion of this course students will be able to
1. Demonstrate an understanding of the discrete-time Fourier transform and the concept of digital
frequency.
2. Design FIR and IIR digital filters to meet arbitrary specifications and Develop algorithms for
implementation
3. Understand the effect of hardware limitations on performance of digital filters
4. Use advanced signal processing techniques and digital signal processors in various applications
Module Unit
Subjec Subject Teaching Scheme(Hrs.)Topics CreditsAssigned Hrs.
No. No.
t Name
Discrete Fourier Transform and Fast Fourier Transform
Cod Theory Practical Tutorial Theory Practical Tutorial Total
e Definition and Properties of DFT,IDFT, circular convolution of sequences using DFT
EXC703 Digital Signal 4 -- -- 4 -- -- 4
and IDFT, Relation between Z-transform and DFT
Processing
1.1
1.0 Filtering of long data sequences: Overlap Save and Overlap Add Method 10
Computation of DFT
Fast Fourier transforms(FFT),Radix-2decimationintime and decimation in frequency
1.2
FFT algorithms, inverse FFT, and Introduction to composite FFT
IIR Digital Filters
Types of IIR Filters (Low Pass, High Pass, Band Pass, Band stop and All Pass)
2.1
Analog filter approximations: Butterworth, Chebyshev I and II
2.0 MappingofS-planetoZ-plane,impulseinvariancemethod,bilineartransformation 10
2.2 method, Design of IIR digital filters from analog filters with examples
2.3 Analog and digital frequency transformations with design examples
FIR Digital Filters
Characteristics of FIR digital filters, Minimum Phase, Maximum Phase, Mixed Phase
3.0 10
3.1 and Linear Phase Filters
Frequency response, location of the zero sof linear phase FIR filters
Design of FIR filter susing window techniques (Rectangular, Hamming,

Hanning,Blackmann, Barlet)
3.2
Design of FIR filter susing Frequency Sampling technique
Comparison of IIR and FIR filters
Finite Word Length Effects in Digital Filters
Quantization, truncation and rounding, Effects due to truncation and rounding, Input
4.1 quantization error, Product quantization error, Co-efficient quantization error, Zero-
4.0 input limit cycle oscillations, Overflow limit cycle oscillations, Scaling 06
Quantization in Floating Point realization of IIR digital filtersFinite word length effects
4.2 in FIR digital filters
Multirate DSPand FilterBanks
Introduction and concept of Multirate Processing, Block Diagram of Decimator and
5.1 Interpolator, Decimation and Interpolation by Integer numbers Multistage
5.0 Approach to Sampling rate converters 06
Sample rate conversion using Polyphase filter structure, Type I and Type II
5.2 Polyphase Decomposition
DSP Processors and Applications
Introduction to General Purpose and Special Purpose DSP processors, fixed point and
floating point DSP processor, Computer architecture for signal processing, Harvard
6.1
6.0 Architecture, Pipelining, multiplier and accumulator(MAC), Special Instructions, 06
Replication, On-chip memory, Extended Parallelism
General purpose digital signal processors, Selecting digital signal processors, Special
6.2
purpose DSP hardware
6.3 Applications of DSP: Radar Signal Processing and Speech Processing
Total 48
Text Books:
1. Emmanuel C. Ifeachor, Barrie W. Jervis, “Digital Signal Processing”, A Practical Approach by,
Pearson Education
2. Tarun Kumar Rawat, “ Digital Signal Processing”, Oxford University Press, 2015
Reference Books:
1. ProakisJ., Manolakis D., "Digital Signal Processing", 4th Edition, Pearson Education
2. Sanjit K. Mitra , Digital Signal Processing – A Computer Based Approach – edition 4e
3. McGraw Hill Education (India) Private Limited
4. OppenheimA.,SchaferR.,BuckJ.,"DiscreteTimeSignalProcessing",2ndEdition, Pearson Education..
5. B. VenkataRamaniand, M. Bhaskar, “Digital Signal Processors, Architecture,
Programming andApplications”, Tata McGraw Hill, 2004.
6. L.R.RabinerandB.Gold,“TheoryandApplicationsofDigitalSignalProcessing”,Prentice-HallofIndia, 2006.
Two tests must be conducted which should cover at least 80% of syllabus. The average marks
of both the tests will be considered as final IA marks
3: Question No.1 will be compulsory and based on entire syllabus wherein sub questions of 2 to
5markswill be asked.
4: Remaining questions will be selected from all the modules.
Subject Code Subject Name Teaching Scheme (Hrs.) Credits Assigned

Theory Practical Tutorial Theory TW/Practical Tutorial Total
ELXDLO7031 NEURAL 4 2 -- 4 -- -- 04
NETWORKS
& FUZZY
LOGIC
Subject Code Subject Name Examination Scheme

Theory Marks Term Practical Oral Total
Internal assessment End Work
Test Test Ave. Of Sem.
1 2 Test 1 Exam
and Test
2
ELXDLO7031 NEURAL 20 20 20 80 - -- -- 100
NETWORKS
& FUZZY
LOGIC
Pre-requisite
 Knowledge of linear algebra, multivariate calculus, and probability theory

 Knowledge of a programming language (MATLAB /C/C ++ recommended)
Course Objectives:
 To study basics of biological Neural Network.
 To understand the different types of Artificial Neural Networks
 To know the applications of ANN .
 To study fuzzy logic and fuzzy systems.
Course outcomes:
At the end of completing the course of Neural Networks & Fuzzy Logic, a student will be able to:
1. Choose between different types of neural networks

2. Design a neural network for a particular application
3. Understand the applications of neural networks
4. Appreciate the need for fuzzy logic and control
Module Contents Hours
Introduction:1.1 Biological neurons, McCulloch and Pitts models of neuron, Types

of activation function, Network architectures, Knowledge representation, Hebb net
1.2 Learning processes: Supervised learning, Unsupervised learning and

Reinforcement learning
1
1.3 Learning Rules : Hebbian Learning Rule, Perceptron Learning Rule, Delta 10
Learning Rule, Widrow-Hoff Learning Rule, Correlation Learning Rule, Winner-
Take-All Learning Rule
1.4 Applications and scope of Neural Networks
Supervised Learning Networks :
2.1 Perception Networks – continuous & discrete, Perceptron convergence theorem,
Adaline, Madaline, Method of steepest descent, – least mean square algorithm,

2
Linear & non-linear separable classes & Pattern classes, 12
2.2 Back Propagation Network,
2.3 Radial Basis Function Network.
Unsupervised learning network:
3.1 Fixed weights competitive nets,

3 06
3.2 Kohonen Self-organizing Feature Maps, Learning Vector Quantization,
3.3 Adaptive Resonance Theory – 1
Associative memory networks:
4.1 Introduction, Training algorithms for Pattern Association,

4 4.2 Auto-associative Memory Network, Hetero-associative Memory Network,
08
Bidirectional Associative Memory,
4.3 Discrete Hopfield Networks.
Fuzzy Logic:
5.1 Fuzzy Sets, Fuzzy Relations and Tolerance and Equivalence

5 12
5.2 Fuzzification and Defuzzification
5.3 Fuzzy Controllers

TOTAL 48
Text- Books:
 Dr. S. N. Sivanandam, Mrs S.N. Deepa, “Principles of Soft computing”, Wiley Publication.
 Jacek M. Zurada, "Introduction to Artificial Neural Systems, Jaico publishing house.
Reference books :
 Simon Haykin, “Neural Network a - Comprehensive Foundation”, Pearson Education.

 S. Rajsekaran, Vijaylakshmi Pai, “Neural Networks, Fuzzy Logic, and Genetic Algorithms”, PHI.
 Thimothy J. Ross, “Fuzzy Logic with Engineering Applications”, Wiley Publication.
 Christopher M Bishop, “Neural Networks For Pattern Recognition” ,Oxford Publication
Two tests must be conducted which should cover at least 80% of syllabus. The average marks
of both the tests will be considered as final IA marks
1. Question paper will comprise of total 6 questions, each of 20 marks.
2. Only 4 questions need to be solved.
3. Question number 1 will be compulsory and based on entire syllabus wherein sub questions of 2 to 5 marks
will be asked.
4. Remaining questions will be selected from all the modules.
5. No question should be asked from pre-requisite module

ELXDLO7032 Advanced 4 2 -- 4 -- -- 04
Networking
Technologies

1 2 Test 1 Exam
and Test
2
ELXDLO7032 Advanced 20 20 20 80 - -- -- 100
Networking
Technologies
Course Pre-requisite: ELX405 Principles of Communication Engineering

ELX602 Computer Communication Network
ELXDLO-2 Wireless Communication
Course Objectives:
The objectives of this course are to:
1. Understand the characteristic features of Various Wireless networks
2. Understand Optical networking and significance of DWDM.
3. Introduce the need for network security and safeguards
4. Understand the principles of network management
Course Outcomes:
On successful completion of the course the students will be able to:
1. Appreciate the need for Wireless networks and study the IEEE 802.11 Standards
2. Comprehend the significance of Asynchronous Transfer Mode(ATM)
3. Understand the features of emerging wireless Networks: Bluetooth Networks,ZIGBEE, WSN
4. Analyze the importance of Optical networking
5. Demonstrate knowledge of network design and security and management
6. Understand the concept of Cloud Computing and its applications.
Module Unit Topics Hrs.

No. No.
1. Wireless LAN and WAN technologies 08
1.1 Introduction to Wireless networks : Infrastructure networks, Ad-hoc networks,
IEEE 802.11 architecture and services, Medium Access Control sub-layers, CSMA/CA
Physical Layer, 802.11 Security considerations .
1.2 Asynchronous Transfer Mode (ATM): Architecture, ATM logical connections, ATM
cells , ATM Functional Layers, Congestion control and Quality of service

2. Emerging Wireless Technologies 10
2.1 Wireless Personnel Area Network(WPAN): WPAN 802.15.1 architecture ,Bluetooth

Protocol Stack, Bluetooth Link Types, Bluetooth Security, Network Connection
Establishment in Bluetooth, Network Topology in Bluetooth, Bluetooth Usage
Models
2.2 802.15.3- Ultra Wide Band , 802.15.4- Zigbee , RFID
2.3 Wireless Sensor Networks: Introduction and Applications, Wireless Sensor Network
Model, Sensor Network Protocol Stack,
3.0 Optical Networking 08
3.1 SONET : SONET/SDH, Architecture, Signal, SONET devices, connections, SONET

layers, SONET frames, STS Multiplexing, SONET Networks
3.2 DWDM: Frame format, DWDM architecture ,Optical Amplifier , Optical cross connect
Performance and design considerations
4.0 Network Design, Security and Management 10
4.1 3 tier Network design layers: Application layer, Access layer, Backbone layers,
Ubiquitous computing and Hierarchical computing
4.2 Network Security: Security goal, Security threats, security safeguards, firewall types
and design.
4.3 Network management definitions, functional areas (FCAPS), SNMP,RMON
5.0 Routing in the Internet: 06
5.1 Intra and inter domain Routing, Unicast Routing Protocols: RIP, OSPF, BGP
5.2 Multicast Routing Protocols ,Drawbacks of traditional Routing methods
6.0 Cloud computing: 06

6.1 Cloud Computing Evolution, Definition, SPI framework of Cloud Computing, Cloud service
delivery models,
6.2 Cloud deployment models, key drivers to adoption of cloud, impact of cloud computing on
users, examples of cloud service providers: Amazon, Google, Microsoft, Salesforce etc.
Total 48
Recommended Text Books:
1. Behrouz A. Forouzan, “Data communication and networking “, McGraw Hill Education, Fourth Edition.
2. Darren L. Spohn , “Data Network Design” , McGraw Hill Education ,Third edition
3. William Stallings, “Data and Computer communications”, Pearson Education, 10th Edition.
4. Tim Mather , Subra Kumaraswamy & Shahed Latif, “Cloud security & Privacy: an enterprise Perspective”,
O’Reilly Media Inc.Publishers
Reference Books:
1. William Stallings, “Wireless Communications and Networks”, Pearson Ed., 2nd Edition.
2. Vijay Garg ,”Wireless Communication and networking” , Morgan Kaufmann Publishers

3. Carr and Snyder, “ Data communication and network security” , McGraw Hill ,1ST edition.
4. Upena Dalal & Manoj Shukla , “ Wireless Communication and Networks”, Oxford Press
5. Deven Shah , Ambavade, “Advanced Communication Networking”
6. Beherouz A Forouzan , “TCP /IP Protocol Suite” , Tata McGraw Hill Education ,4th edition.

Two tests must be conducted which should cover at least 80% of the syllabus. The average marks of both the
tests will be considered as final IA marks.

5 marks will be asked.

ELXDLO7033 Robotics 4 2 -- 4 -- -- 04

1 2 Test 1 Exam
and Test
2
ELXDLO7033 Robotics 20 20 20 80 - -- -- 100
Pre-requisite: Applied Mathematics III, Applied Mathematics IV ,Linear Control Systems
Course Objectives:
1. To study basics of robotics

2. To familiarize students with kinematics & dynamics of robots
3 To familiarize students with Trajectory & task planning of robots.
4 To familiarize students with robot vision
Course outcomes:
At the end of completing the course of Robotics, a student will be able to:
1. understand the basic concepts of robotics

2. perform the kinematic and the dynamic analysis of robots
3. perform trajectory and task planning of robots
4. describe importance of visionary system in robotic manipulation
Module Contents Hours
1 Fundamentals of Robotics: 1.1 Robot Classification, Robot Components,

Robot Specification, Joints, Coordinates, Coordinate frames, Workspace,
Languages, Applications. 04
2 Kinematics of Robots:
2.1 Homogeneous transformation matrices, Inverse transformation matrices,

Forward and inverse kinematic equations – position and orientation 10
2.2 Denavit-Hatenberg representation of forward kinematics, Forward and

inverse kinematic solutions of three and four axis robot
3 Velocity Kinematics & Dynamics: 10
3.1 Differential motions and velocities : Differential relationship, Jacobian,

Differential motion of a frame and robot, Inverse Jacobian, Singularities,
3.2 Dynamic Analysis of Forces : Lagrangian mechanics, Newton Euler

formulation, Dynamic equations of two axis robot
4 Trajectory planning: 4.1 Basics of Trajectory planning , Joint-space

trajectory planning, Cartesian-space trajectories
08
5 Robot Vision: 5.1 Image representation, Template matching, Polyhedral 08

objects, Shape analysis, Segmentation, Iterative processing, Perspective
transform, Camera Calibration
6 Task Planning: 6.1 Task level programming, Uncertainty, Configuration 08

Space, Gross motion Planning; Grasp planning, Fine-motion Planning,
Simulation of Planer motion, Source and goal scenes, Task planner
simulation.
TOTAL 48
Text- Books :
 Robert Shilling, “Fundamentals of Robotics - Analysis and contro”l, Prentice Hall of

India, 2009
 Saeed Benjamin Niku, “Introduction to Robotics – Analysis, Control, Applications”,
Wiley India Pvt. Ltd., Second Edition, 2011
Reference books :
 John J. Craig, “Introduction to Robotics – Mechanics & Control”, Third Edition, Pearson
Education, India, 2009
 Mark W. Spong , Seth Hutchinson, M. Vidyasagar, “Robot Modeling & Control ”,
Wiley India Pvt. Ltd., 2006
 Mikell P. Groover et.al, ”Industrial Robots-Technology, Programming & applications”,
McGraw Hill , New York, 2008
Two tests must be conducted which should cover at least 80% of the syllabus. The average
marks of both the tests will be considered as final IA marks.
Subject
Code Subject Name Teaching Scheme Credits Assigned
Theor Practica Tutoria Theor Tutoria Tota

y l l y TW/Practical l l
ELXDLO70 IC 04 -- -- 04 -- -- 04
34
Technology
Examination
Subject Subject Scheme
Code Name Theory Marks Term Practical Oral Total
Internal Wor
assessment End Sem. k
Test Test
1 2 Avg. of Exam
Test 1
and
Test 2
ELXDL IC Technology 20 20 20 80 -- -- -- 100
O7034
Course Pre-requisite:
฀ ELX302:Electronic Devices and Circuits I
฀ ELX303:Digital Circuit Design
฀ ELX603:VLSI Design
Course Objectives:
1. To provide knowledge of IC fabrication processes and advanced IC technologies.
2. To disseminate knowledge about novel VLSI devices and materials.
Course Outcomes:
After successful completion of the course student will be able to
1. Demonstrate a clear understanding of various MOS fabrication processes & CMOS
fabrication flow.
2. Design layout of MOS based Circuits.

3. Demonstrate a clear understanding of Semiconductor Measurements & Testing.
4. Understand advanced technologies, Novel Devices and materials in Modern VLSI
Technology.
Module Unit
No. No. Topics Hrs.
1. 0 Crystal Growth, Wafer preparation and fabrication for VLSI Technology 8
1.1 Semiconductor Manufacturing: Semiconductor technology trend, Clean rooms,

Wafer cleaning and Gettering.
1.2 Semiconductor Substrate:

Crystal structure, Crystal defects, Czochralski growth, Float Zone growth, Bridgman
growth of GaAs, Wafer Preparation and specifications
2.0 Fabrication Processes Part 1 12
2.1 Epitaxy: Classification, Molecular Beam Epitaxy

2.2 Silicon Oxidation: Thermal oxidation process, Kinetics of growth, Properties of
Silicon Dioxide, Oxide Quality.
2.3 Device Isolation: LOCOS, Shallow Trench Isolation (STI).

Deposition: Physical Vapor Deposition-Evaporation and Sputtering,
2.4 Chemical Vapor Deposition: APCVD, LPCVD,PECVD
2.4 Diffusion: Nature of diffusion, Diffusion in a concentration gradient, diffusion

Equation, diffusion systems, problems in diffusion.
2.5
Ion Implantation: Penetration range-Nuclear& Electronic stopping and Range,
implantation damage, Annealing-Rapid thermal annealing, ion implantation systems.
3.0 Fabrication Process Part 2 12
3.1 Etching &Lithography:

Etching: Basic concepts and Classification
Lithography: Introduction to Lithography process, Types of Photoresist,
Types of Lithography: Electron beam, Ion beam and X-ray lithography
3.2
Metallization and Contacts: Introduction to Metallization, Schottky contacts and
Ohmic contacts.
3.3 CMOS Process Flow: N well, P-well and Twin tub, CMOS Latch Up
3.4 Design rules, Layout of MOS based circuits (gates and combinational logic), Buried
and Butting Contact
4.0 Measurement and Testing 06
4.1 Semiconductor Measurements: Conductivity type, Resistivity, Hall Effect

Measurements, Drift Mobility,
4.2 Testing: Technology trends affecting testing, VLSI testing process and test
equipment, test economics and product quality
VLSI Technologies 05
5.1 SOI Technology: SOI fabrication using SIMOX, Bonded SOI and Smart Cut ,PD
SOI and FD SOI Device structure and their features
5.2 Advanced Technologies: low κ and high κ, BiCMOS, HκMG Stack, Strained
Silicon.
5.3 GaAs Technologies: MESFET Technology, MMIC technologies, MODFET

Novel Devices and Materials
Multigate Devices:Various multigate device configurations-double gate, triple gate

6.1 (FinFET) and Gate All Around (Nanowire). 05
Nanowire: Concept, VLS method of fabrication, Nanowire FET, Types: Horizontal
and Vertical Nanowires, III-V compound Materials in Nanowires.
6.2 2-D Materials and FET:Graphene& CNT FET, MOS2 and Black Phosphorous.
Total 48
Recommended Books:
1. James D. Plummer, Michael D. Deal and Peter B. Griffin, “Silicon VLSI Technology”,
Pearson, Indian Edition.
2. Stephen A. Campbell, “The Science and Engineering of Microelectronic Fabrication”,

nd
Oxford University Press, 2 Edition.
3. Sorab K. Gandhi, “VLSI Fabrication Principles”, Wiley, Student Edition.
4. G. S. May and S. M. Sze, “Fundamentals of Semiconductor Fabrication”, Wiley, First
Edition.
5. Kerry Bernstein and N. J. Rohrer, “SOI Circuit Design Concepts”, Kluwer Academic
st
Publishers, 1 edition.
st
6. Jean-Pierre Colinge, “FinFETs and Other Multigate Transistors”, Springer, 1 edition
7. M. S. Tyagi, “Introduction to Semiconductor Materials and Devices”, John Wiley and
st
Sons, 1 edition.
8. James E. Morris and KrzysztolIniewski, “Nanoelectronic Device ApplicationsHandbook”,

CRC Press
9. Glenn R. Blackwell, “The electronic packaging”, CRC Press
10. Michael L. Bushnell and Vishwani D. Agrawal, “Essentials of Electronic Testing fordigital,
memory and mixed-signal VLSI circuits”, Springer

Two tests must be conducted which should cover at least 80% of the syllabus. The average
marks of both the tests will be considered as final IA marks.
Course Code Course Name Credits
ILO7011 Product Life Cycle Management 03
Objectives:
1. To familiarize the students with the need, benefits and components of PLM
2. To acquaint students with Product Data Management & PLM strategies
3. To give insights into new product development program and guidelines for designing and
developing a product
4. To familiarize the students with Virtual Product Development
Outcomes: Learner will be able to…
1. Gain knowledge about phases of PLM, PLM strategies and methodology for PLM
feasibility study and PDM implementation.
2. Illustrate various approaches and techniques for designing and developing products.
3. Apply product engineering guidelines / thumb rules in designing products for moulding,
machining, sheet metal working etc.
4. Acquire knowledge in applying virtual product development tools for components,
machining and manufacturing plant
Module Detailed Contents Hrs
Introduction to Product Lifecycle Management (PLM):Product Lifecycle 10

Management (PLM), Need for PLM, Product Lifecycle Phases, Opportunities of
Globalization, Pre-PLM Environment, PLM Paradigm, Importance & Benefits of PLM,
Widespread Impact of PLM, Focus and Application, A PLM Project, Starting the PLM
01
Initiative, PLM Applications
PLM Strategies:Industrial strategies, Strategy elements, its identification,

selection and implementation, Developing PLM Vision and PLM Strategy ,
Change management for PLM
ProductDesign:Product Design and Development Process, Engineering Design, 09
Organization and Decomposition in Product Design, Typologies of Design Process
Models, Reference Model, Product Design in the Context of the Product Development
Process, Relation with the Development Process Planning Phase, Relation with the Post
design Planning Phase, Methodological Evolution in Product Design, Concurrent
02
Engineering, Characteristic Features of Concurrent Engineering, Concurrent
Engineering and Life Cycle Approach, New Product Development (NPD) and
Strategies, Product Configuration and Variant Management, The Design for X System,
Objective Properties and Design for X Tools, Choice of Design for X Tools and Their
Use in the Design Process
Product Data Management (PDM):Product and Product Data, PDM systems 05

03
and importance, Components of PDM, Reason for implementing a PDM system,
financial justification of PDM, barriers to PDM implementation
Virtual Product Development Tools:For components, machines, and 05
04 manufacturing plants, 3D CAD systems and realistic rendering techniques,
Digital mock-up, Model building, Model analysis, Modeling and simulations in
Product Design, Examples/Case studies
Integration of Environmental Aspects in Product Design:Sustainable Development, 05
Design for Environment,Need for Life Cycle Environmental Strategies, Useful Life
05 Extension Strategies, End-of-Life Strategies, Introduction of Environmental Strategies
into the Design Process, Life Cycle Environmental Strategies and Considerations for
Product Design
Life Cycle Assessment and Life Cycle Cost Analysis:Properties, and Framework of 05
Life Cycle Assessment, Phases of LCA in ISO Standards, Fields of Application and
06 Limitations of Life Cycle Assessment, Cost Analysis and the Life Cycle Approach,
General Framework for LCCA, Evolution of Models for Product Life Cycle Cost
Analysis
Assessment:
Internal:
Assessment consists of two tests out of which; one should be compulsory class test and the other is either
a class test or assignment on live problems or course project.
End Semester Theory Examination:
Some guidelines for setting up the question paper.Minimum 80% syllabus should be covered in question
papers of end semester examination. In question paper weightage of each module will be proportional
to number of respective lecture hours as mention in the syllabus.
1. Question paper will comprise of total six question

2. All question carry equal marks
3. Questions will be mixed in nature (for example supposed Q.2 has part (a) from module 3 then
part (b) will be from any module other than module 3)
4. Only Four question need to be solved.
REFERENCES:
1. John Stark, “Product Lifecycle Management: Paradigm for 21st Century Product
Realisation”, Springer-Verlag, 2004. ISBN: 1852338105
2. Fabio Giudice, Guido La Rosa, AntoninoRisitano, “Product Design for the environment-
A life cycle approach”, Taylor & Francis 2006, ISBN: 0849327229
3. SaaksvuoriAntti, Immonen Anselmie, “Product Life Cycle Management”, Springer,
Dreamtech, ISBN: 3540257314
4. Michael Grieve, “Product Lifecycle Management: Driving the next generation of lean
thinking”, TataMcGrawHill,2006,ISBN:0070636265
ILO7012 Reliability Engineering 03
Objectives:
1. To familiarize the students with various aspects of probability theory

2. To acquaint the students with reliability and its concepts
3. To introduce the students to methods of estimating the system reliability of simple and complex
systems
4. To understand the various aspects of Maintainability, Availability and FMEA procedure
1. Understand and apply the concept of Probability to engineering problems

2. Apply various reliability concepts to calculate different reliability parameters
3. Estimate the system reliability of simple and complex systems
4. Carry out a Failure Mode Effect and Criticality Analysis
Probability theory: Probability: Standard definitions and concepts; Conditional

Probability, Baye’s Theorem.
Probability Distributions: Central tendency and Dispersion; Binomial, Normal,

01 08
Poisson, Weibull, Exponential, relations between them and their significance.
Measures of Dispersion: Mean, Median, Mode, Range, Mean Deviation, Standard

Deviation, Variance, Skewness and Kurtosis.
Reliability Concepts: Reliability definitions, Importance of Reliability, Quality

Assurance and Reliability, Bath Tub Curve.
Failure Data Analysis: Hazard rate, failure density, Failure Rate, Mean Time To
02 08
Failure (MTTF), MTBF, Reliability Functions.
Reliability Hazard Models: Constant Failure Rate, Linearly increasing, Time

Dependent Failure Rate, Weibull Model. Distribution functions and reliability analysis.
System Reliability: System Configurations: Series, parallel, mixed configuration, k out

03 05
of n structure, Complex systems.
Reliability Improvement: Redundancy Techniques: Element redundancy, Unit

04 08
redundancy, Standby redundancies. Markov analysis.
System Reliability Analysis – Enumeration method, Cut-set method, Success
Path method, Decomposition method.
Maintainability and Availability: System downtime, Design for Maintainability:

Maintenance requirements, Design methods: Fault Isolation and self-diagnostics, Parts
05 standardization and Interchangeability, Modularization and Accessibility, Repair Vs 05
Replacement.
Availability – qualitative aspects.
Failure Mode, Effects and Criticality Analysis: Failure mode effects analysis,
severity/criticality analysis, FMECA examples. Fault tree construction, basic symbols,
06 05
development of functional reliability block diagram, Fau1t tree analysis and Event tree
Analysis
Assessment:
Internal:
Some guidelines for setting up the question paper. Minimum 80% syllabus should be covered in question

REFERENCES:
1. L.S. Srinath, “Reliability Engineering”, Affiliated East-Wast Press (P) Ltd., 1985.
2. Charles E. Ebeling, “Reliability and Maintainability Engineering”, Tata McGraw Hill.
3. B.S. Dhillion, C. Singh, “Engineering Reliability”, John Wiley & Sons, 1980.
4. P.D.T. Conor, “Practical Reliability Engg.”, John Wiley & Sons, 1985.
5. K.C. Kapur, L.R. Lamberson, “Reliability in Engineering Design”, John Wiley & Sons.
6. Murray R. Spiegel, “Probability and Statistics”, Tata McGraw-Hill Publishing Co. Ltd.
ILO7013 Management Information System 03
Objectives:
1. The course is blend of Management and Technical field.

2. Discuss the roles played by information technology in today’s business and define
various technology architectures on which information systems are built
3. Define and analyze typical functional information systems and identify how they meet
the needs of the firm to deliver efficiency and competitive advantage
4. Identify the basic steps in systems development
1. Explain how information systems Transform Business

2. Identify the impact information systems have on an organization
3. Describe IT infrastructure and its components and its current trends
4. Understand the principal tools and technologies for accessing information from
databases to improve business performance and decision making
5. Identify the types of systems used for enterprise-wide knowledge management and how
they provide value for businesses
Introduction To Information Systems (IS): Computer Based Information Systems,

01 Impact of IT on organizations, Imporance of IS to Society. Organizational Strategy, 4
Competitive Advantages and IS.
Data and Knowledge Management: Database Approach, Big Data, Data warehouse and
Data Marts, Knowledge Management.
02 7
Business intelligence (BI): Managers and Decision Making, BI for Data analysis and
Presenting Results
03 Ethical issues and Privacy: Information Security. Threat to IS, and Security Controls 7
Social Computing (SC): Web 2.0 and 3.0, SC in business-shopping, Marketing,

04 Operational and Analytic CRM, E-business and E-commerce – B2B B2C. Mobile 7
commerce.
05 Computer Networks Wired and Wireless technology, Pervasive computing, Cloud 6

computing model.
Information System within Organization: Transaction Processing Systems, Functional

Area Information System, ERP and ERP support of Business Process.
06 8
Acquiring Information Systems and Applications: Various System development life
cycle models.
Assessment:
Internal:

REFERENCES:
1. Kelly Rainer, Brad Prince,Management Information Systems, Wiley

2. K.C. Laudon and J.P. Laudon, Management Information Systems: Managing the Digital
Firm, 10th Ed., Prentice Hall, 2007.
3. D. Boddy, A. Boonstra, Managing Information Systems: Strategy and Organization,
Prentice Hall, 2008
ILO7014 Design of Experiments 03
Objectives:
1. To understand the issues and principles of Design of Experiments (DOE)

2. To list the guidelines for designing experiments
3. To become familiar with methodologies that can be used in conjunction with
experimental designs for robustness and optimization
1. Plan data collection, to turn data into information and to make decisions that lead to
appropriate action
2. Apply the methods taught to real life situations
3. Plan, analyze, and interpret the results of experiments
Introduction
1.1 Strategy of Experimentation
01 1.2 Typical Applications of Experimental Design 06
1.3 Guidelines for Designing Experiments
1.4 Response Surface Methodology
Fitting Regression Models
2.1 Linear Regression Models
2.2 Estimation of the Parameters in Linear Regression Models
2.3 Hypothesis Testing in Multiple Regression

02 08
2.4 Confidence Intervals in Multiple Regression
2.5 Prediction of new response observation
2.6 Regression model diagnostics
2.7 Testing for lack of fit

Two-Level Factorial Designs and Analysis
3.1 The 22 Design
3.2 The 23 Design
3.3 The General2k Design

03 07
3.4 A Single Replicate of the 2k Design
3.5 The Addition of Center Points to the 2k Design,
3.6 Blocking in the 2k Factorial Design
3.7 Split-Plot Designs
Two-Level Fractional Factorial Designs and Analysis
4.1 The One-Half Fraction of the 2k Design
4.2 The One-Quarter Fraction of the 2k Design
04 4.3 The General 2k-p Fractional Factorial Design 07
4.4 Resolution III Designs
4.5 Resolution IV and V Designs
4.6 Fractional Factorial Split-Plot Designs
Conducting Tests
5.1 Testing Logistics
5.2 Statistical aspects of conducting tests
05 5.3 Characteristics of good and bad data sets 07
5.4 Example experiments
5.5 Attribute Vs Variable data sets
Taguchi Approach
6.1 Crossed Array Designs and Signal-to-Noise Ratios

06 04
6.2 Analysis Methods
6.3 Robust design examples

Assessment:
Internal:

REFERENCES:
1. Raymond H. Mayers, Douglas C. Montgomery, Christine M. Anderson-Cook, Response

Surface Methodology: Process and Product Optimization using Designed Experiment,
3rd edition,John Wiley & Sons, New York, 2001
2. D.C. Montgomery, Design and Analysis of Experiments, 5th edition, John Wiley & Sons,
New York, 2001
3. George E P Box, J Stuart Hunter, William G Hunter, Statics for Experimenters: Design,
Innovation and Discovery, 2nd Ed. Wiley
4. W J Dimond, Peactical Experiment Designs for Engineers and Scintists, John Wiley and
Sons Inc. ISBN: 0-471-39054-2
5. Design and Analysis of Experiments (Springer text in Statistics), Springer by A.M. Dean,
and D. T.Voss
6. Phillip J Ross, “Taguchi Technique for Quality Engineering,” McGrawHill
7. Madhav S Phadke, “ Quality Engineering using Robust Design,” Prentice Hall
ILO7015 Operations Research 03
Objectives:
1. Formulate a real-world problem as a mathematical programming model.

2. Understand the mathematical tools that are needed to solve optimization problems.
3. Use mathematical software to solve the proposed models.
1. Understand the theoretical workings of the simplex method, the relationship between a linear
program and its dual, including strong duality and complementary slackness.
2. Perform sensitivity analysis to determine the direction and magnitude of change of a model’s
optimal solution as the data change.
3. Solve specialized linear programming problems like the transportation and assignment problems,
solve network models like the shortest path, minimum spanning tree, and maximum flow
problems.
4. Understand the applications of integer programming and a queuing model and compute
important performance measures
Introduction to Operations Research: Introduction, , Structure of the Mathematical

Model, Limitations of Operations Research
Linear Programming: Introduction, Linear Programming Problem, Requirements of

LPP, Mathematical Formulation of LPP, Graphical method, Simplex Method Penalty
Cost Method or Big M-method, Two Phase Method, Revised simplex method,
Duality, Primal – Dual construction, Symmetric and Asymmetric Dual, Weak Duality
Theorem, Complimentary Slackness Theorem, Main Duality Theorem, Dual Simplex
01 14
Method, Sensitivity Analysis
Transportation Problem: Formulation, solution, unbalanced Transportation problem.

Finding basic feasible solutions – Northwest corner rule, least cost method and Vogel’s
approximation method. Optimality test: the stepping stone method and MODI method.
Assignment Problem: Introduction, Mathematical Formulation of the Problem,

Hungarian Method Algorithm, Processing of n Jobs Through Two Machines and m
Machines, Graphical Method of Two Jobs m Machines Problem Routing Problem,
Travelling Salesman Problem
Integer Programming Problem: Introduction, Types of Integer Programming

Problems, Gomory’s cutting plane Algorithm, Branch and Bound Technique.
Introduction to Decomposition algorithms.
Queuing models: queuing systems and structures, single server and multi-server
02 models, Poisson input, exponential service, constant rate service, finite and infinite 05
population
Simulation: Introduction, Methodology of Simulation, Basic Concepts, Simulation

Procedure, Application of Simulation Monte-Carlo Method: Introduction, Monte-Carlo
03 05
Simulation, Applications of Simulation, Advantages of Simulation, Limitations of
Simulation
Dynamic programming. Characteristics of dynamic programming. Dynamic

programming approach for Priority Management employment smoothening, capital
04 budgeting, Stage Coach/Shortest Path, cargo loading and Reliability problems. 05
Game Theory. Competitive games, rectangular game, saddle point, minimax

(maximin) method of optimal strategies, value of the game. Solution of games with
05 05
saddle points, dominance principle. Rectangular games without saddle point – mixed
strategy for 2 X 2 games.
Inventory Models: Classical EOQ Models, EOQ Model with Price Breaks, EOQ with
06 05
Shortage, Probabilistic EOQ Model,
Assessment:
Internal:

REFERENCES:
1. Taha, H.A. "Operations Research - An Introduction", Prentice Hall, (7th Edition), 2002.
2. Ravindran, A, Phillips, D. T and Solberg, J. J. "Operations Research: Principles and
Practice", John Willey and Sons, 2nd Edition, 2009.
3. Hiller, F. S. and Liebermann, G. J. "Introduction to Operations Research", Tata McGraw
Hill, 2002.
4. Operations Research, S. D. Sharma, KedarNath Ram Nath-Meerut.
5. Operations Research, KantiSwarup, P. K. Gupta and Man Mohan, Sultan Chand & Sons.
ILO7016 Cyber Security and Laws 03
Objectives:
1. To understand and identify different types cybercrime and cyber law

2. To recognized Indian IT Act 2008 and its latest amendments
3. To learn various types of security standards compliances
1. Understand the concept of cybercrime and its effect on outside world

2. Interpret and apply IT law in various legal issues
3. Distinguish different aspects of cyber law
4. Apply Information Security Standards compliance during software design and
development
Introduction to Cybercrime: Cybercrime definition and origins of the world,

01 Cybercrime andinformation security, Classifications of cybercrime, Cybercrime and the 4
Indian ITA 2000, A global Perspective on cybercrimes.
Cyber offenses & Cybercrime: How criminal plan the attacks, Social Engg, Cyber
stalking, Cyber café and Cybercrimes, Botnets, Attack vector, Cloud computing,
Proliferation ofMobile and Wireless Devices, Trends in Mobility, Credit Card Frauds in
02 Mobile and Wireless Computing Era, Security Challenges Posed byMobile Devices, 9
Registry Settings for Mobile Devices, AuthenticationService Security, Attacks on
Mobile/Cell Phones, Mobile Devices:Security Implications for Organizations,
Organizational Measures forHandling Mobile, Devices-Related Security Issues,
OrganizationalSecurity Policies and Measures in Mobile Computing Era, Laptops
Tools and Methods Used in Cyberline
03 Phishing, Password Cracking, Keyloggers and Spywares, Virus and Worms, 6

Steganography, DoS and DDoS Attacks, SQL Injection, Buffer Over Flow, Attacks on
Wireless Networks, Phishing, Identity Theft (ID Theft)
The Concept of Cyberspace

04 8
E-Commerce , The Contract Aspects in Cyber Law ,The Security Aspect of Cyber Law
,The Intellectual Property Aspect in Cyber Law

, The Evidence Aspect in Cyber Law , The Criminal Aspect in Cyber Law, Global
Trends in Cyber Law , Legal Framework for Electronic Data Interchange Law Relating
to Electronic Banking , The Need for an Indian Cyber Law
Indian IT Act.
05 Cyber Crime and Criminal Justice : Penalties, Adjudication and Appeals Under the IT 6
Act, 2000, IT Act. 2008 and its Amendments
Information Security Standard compliances

06 6
SOX, GLBA, HIPAA, ISO, FISMA, NERC, PCI.
Assessment:
Internal:
papers of end semester examination.
In question paper weightage of each module will be proportional to number of respective lecture
hours as mention in the syllabus.

REFERENCES:
1. Nina Godbole, Sunit Belapure, Cyber Security, Wiley India, New Delhi
2. The Indian Cyber Law by Suresh T. Vishwanathan; Bharat Law House New Delhi
3. The Information technology Act, 2000; Bare Act- Professional Book Publishers, New
Delhi.
4. Cyber Law & Cyber Crimes By Advocate Prashant Mali; Snow White Publications,
Mumbai
5. Nina Godbole, Information Systems Security, Wiley India, New Delhi
6. Kennetch J. Knapp, Cyber Security &Global Information Assurance Information Science
Publishing.
7. William Stallings, Cryptography and Network Security, Pearson Publication
8. Websites for more information is available on : The Information Technology ACT,

2008- TIFR : https://www.tifrh.res.in
9. Website for more information , A Compliance Primer for IT professional :
https://www.sans.org/reading-room/whitepapers/compliance/compliance-primer-
professionals-33538
ILO7017 Disaster Management and Mitigation Measures 03
Objectives:
1. To understand physics and various types of disaster occurring around the world
2. To identify extent and damaging capacity of a disaster
3. To study and understand the means of losses and methods to overcome /minimize it.
4. To understand role of individual and various organization during and after disaster
5. To understand application of GIS in the field of disaster management
6. To understand the emergency government response structures before, during and after
disaster
1. Get to know natural as well as manmade disaster and their extent and possible effects on the
economy.
2. Plan of national importance structures based upon the previous history.
3. Get acquainted with government policies, acts and various organizational structure
associated with an emergency.
4. Get to know the simple do’s and don’ts in such extreme events and act accordingly.
Introduction
01 1.1 Definition of Disaster, hazard, global and Indian scenario, general 03

perspective, importance of study in human life, Direct and indirect effects of
disasters, long term effects of disasters. Introduction to global warming and
climate change.
Natural Disaster and Manmade disasters:
2.1 Natural Disaster: Meaning and nature of natural disaster, Flood, Flash flood,
drought, cloud burst, Earthquake, Landslides, Avalanches, Volcanic
eruptions, Mudflow, Cyclone, Storm, Storm Surge, climate change, global
02 09
warming, sea level rise, ozone depletion
2.2 Manmade Disasters: Chemical, Industrial, Nuclear and Fire Hazards. Role of
growing population and subsequent industrialization, urbanization and
changing lifestyle of human beings in frequent occurrences of manmade
disasters.
Disaster Management, Policy and Administration
03 3.1 Disaster management: meaning, concept, importance, objective of disaster 06
management policy, disaster risks in India, Paradigm shift in disaster management.
3.2 Policy and administration:
Importance and principles of disaster management policies, command and co-

ordination of in disaster management, rescue operations-how to start with and how
to proceed in due course of time, study of flowchart showing the entire process.
Institutional Framework for Disaster Management in India:
4.1 Importance of public awareness, Preparation and execution of emergency

management programme.Scope and responsibilities of National Institute of Disaster
Management (NIDM) and National disaster management authority (NDMA) in
04 India.Methods and measures to avoid disasters, Management of casualties, set up of 06
emergency facilities, importance of effective communication amongst different
agencies in such situations.
4.2 Use of Internet and softwares for effective disaster management. Applications of
GIS, Remote sensing and GPS in this regard.
Financing Relief Measures:
5.1 Ways to raise finance for relief expenditure, role of government agencies and
NGO’s in this process, Legal aspects related to finance raising as well as overall
05 09
management of disasters. Various NGO’s and the works they have carried out in the
past on the occurrence of various disasters, Ways to approach these teams.
5.2 International relief aid agencies and their role in extreme events.
Preventive and Mitigation Measures:
6.1 Pre-disaster, during disaster and post-disaster measures in some events in general
6.2 Structural mapping: Risk mapping, assessment and analysis, sea walls and
embankments, Bio shield, shelters, early warning and communication
06 06
6.3 Non Structural Mitigation: Community based disaster preparedness, risk transfer
and risk financing, capacity development and training, awareness and education,
contingency plans.
6.4 Do’s and don’ts in case of disasters and effective implementation of relief aids.
Assessment:
Internal:

REFERENCES:
1. ‘Disaster Management’ by Harsh K.Gupta, Universities Press Publications.

2. ‘Disaster Management: An Appraisal of Institutional Mechanisms in India’ by O.S.Dagur,
published by Centre for land warfare studies, New Delhi, 2011.
3. ‘Introduction to International Disaster Management’ by Damon Copolla, Butterworth Heinemann
Elseveir Publications.
4. ‘Disaster Management Handbook’ by Jack Pinkowski, CRC Press Taylor and Francis group.
5. ‘Disaster management & rehabilitation’ by Rajdeep Dasgupta, Mittal Publications, New Delhi.
6. ‘Natural Hazards and Disaster Management, Vulnerability and Mitigation – R B Singh, Rawat
Publications
7. Concepts and Techniques of GIS –C.P.Lo Albert, K.W. Yonng – Prentice Hall (India)
Publications.
(Learners are expected to refer reports published at national and International level and updated
information available on authentic web sites)
ILO 7018 Energy Audit and Management 03
Objectives:
1. To understand the importance energy security for sustainable development and the fundamentals
of energy conservation.
2. To introduce performance evaluation criteria of various electrical and thermal installations to
facilitate the energy management
3. To relate the data collected during performance evaluation of systems for identification of
energy saving opportunities.
1. To identify and describe present state of energy security and its importance.
2. To identify and describe the basic principles and methodologies adopted in energy audit of an
utility.
3. To describe the energy performance evaluation of some common electrical installations and
identify the energy saving opportunities.
4. To describe the energy performance evaluation of some common thermal installations and
identify the energy saving opportunities
5. To analyze the data collected during performance evaluation and recommend energy
saving measures
Energy Scenario:
Present Energy Scenario, Energy Pricing, Energy Sector Reforms, Energy
01
Security, Energy Conservation and its Importance, Energy Conservation Act- 04
2001 and its Features. Basics of Energy and its various forms, Material and
Energy balance
Energy Audit Principles:
Definition, Energy audit- need, Types of energy audit, Energy management
(audit) approach-understanding energy costs, Bench marking, Energy
performance, Matching energy use to requirement, Maximizing system
02
efficiencies, Optimizing the input energy requirements, Fuel and energy 08
substitution. Elements of monitoring& targeting; Energy audit Instruments; Data
and information-analysis.
Financial analysis techniques: Simple payback period, NPV, Return on
investment (ROI), Internal rate of return (IRR)
03 Energy Management and Energy Conservation in Electrical System:
10
Electricity billing, Electrical load management and maximum demand Control;
Power factor improvement, Energy efficient equipments and appliances, star

ratings.
Energy efficiency measures in lighting system, Lighting control: Occupancy
sensors, daylight integration, and use of intelligent controllers.
Energy conservation opportunities in: water pumps, industrial drives, induction
motors, motor retrofitting, soft starters, variable speed drives.
Energy Management and Energy Conservation in Thermal Systems:
Review of different thermal loads; Energy conservation opportunities in: Steam
distribution system, Assessment of steam distribution losses, Steam leakages,
04 Steam trapping, Condensate and flash steam recovery system.
General fuel economy measures in Boilers and furnaces, Waste heat recovery, 10
use of insulation- types and application. HVAC system: Coefficient of
performance, Capacity, factors affecting Refrigeration and Air Conditioning
system performance and savings opportunities.
Energy Performance Assessment:
05 On site Performance evaluation techniques, Case studies based on: Motors and
04
variable speed drive, pumps, HVAC system calculations; Lighting System:
Installed Load Efficacy Ratio (ILER) method, Financial Analysis.
Energy conservation in Buildings:
06 Energy Conservation Building Codes (ECBC): Green Building, LEED rating, 03
Application of Non-Conventional and Renewable Energy Sources
Assessment:
Internal:

REFERENCES:
1. Handbook of Electrical Installation Practice, Geofry Stokes, Blackwell Science

2. Designing with light: Lighting Handbook, By Anil Valia, Lighting System
3. Energy Management Handbook, By W.C. Turner, John Wiley and Sons
4. Handbook on Energy Audits and Management, edited by A. K. Tyagi, Tata Energy Research
Institute (TERI).
5. Energy Management Principles, C.B.Smith, Pergamon Press
6. Energy Conservation Guidebook, Dale R. Patrick, S. Fardo, Ray E. Richardson, Fairmont Press
7. Handbook of Energy Audits, Albert Thumann, W. J. Younger, T. Niehus, CRC Press
8. www.energymanagertraining.com
9. www.bee-india.nic.in

Course
Course Name Tutori TW/Practic
al al
Instrumentation
ELXL7
System Design --- 02 --- 04 --- --- 04
01
Laboratory
Examination Scheme
Course Theory Marks

Work Practical
Instrumentation
ELXL7
System Design --- --- --- --- 25 25 50
01
Laboratory
Term Work :-
At least 06 experiments covering entire syllabus of ELX 701 (Instrumentation System Design)
should be set to have well predefined inference and conclusion. The experiments should be
student centric and attempt should be made to make experiments more meaningful, interesting.
Simulation experiments are also encouraged. Experiment must be graded from time to time. The
Term work assessment can be carried out based on the different tools and the rubrics decided by
the concerned faculty members and need to be conveyed to the students well in advanced. The
grades should be converted into marks as per the Credit and Grading System manual and should
be added and averaged. The grading and term work assessment should be done based on this
scheme. The final certification and acceptance of term work ensures satisfactory performance of
laboratory work and minimum passing marks in term work. Practical and Oral exam will be
based on the entire syllabus. Equal weightage should be given to laboratory experiments and
project while assigning term work marks.
Suggested List of Experiments :-
1. Study of pneumatic single acting & double acting cylinder

2. Study of hydraulic process control valves
3. Design of stepper motor interface & controller
4. Design of instrumentation amplifier for variable voltage gain
5. Design of signal conditioning circuits for LDR / thermistor / RTD / strain gauge
6. Design of linearization circuits for transducers
7. Design of temperature P+I+D controller
8. Tuning of P+I+D controller using MATLAB / Simulink
9. Implementation of PLC ladder diagram for given application
10. Study of SCADA & HMI
11. Designing of data acquisition system (DAS)
12. Simulating a simple process using LabVIEW

Course
al al
ELXL70 Power
--- 02 --- 04 --- --- 04
2 Electronics
Examination Scheme
Course Course Theory Marks

Code Name Term Oral &
Internal Assessment (IA) End Semester Total
Work Practical
ELXL7 Power
--- --- --- --- 25 25 50
02 Electronics
Term Work :-
At least 06 experiments covering entire syllabus of ELX 702 (Power Electronics) should be set to have
well predefined inference and conclusion. The experiments should be student centric and attempt should
be made to make experiments more meaningful, interesting. Simulation experiments are also encouraged.
Experiment must be graded from time to time. The grading and term work assessment should be done
based on this scheme. The final certification and acceptance of term work ensures satisfactory
performance of laboratory work and minimum passing marks in term work. Practical and Oral exam will
be based on the entire syllabus. Equal weightage should be given to laboratory experiments and project
while assigning term work marks. The Term work assessment can be carried out based on the
different tools and the rubrics decided by the concerned faculty members and need to be
conveyed to the students well in advanced.
Suggested List of Experiments
1. Characteristics of SCR, DIAC, TRAIC.
2. Characteristics of IGBT, MOSFET and Power BJT.
3. Firing circuit for SCR using UJT.
4. Study of Half wave and Full wave rectifiers using diodes.
5. Study of Half wave and Full wave controlled rectifiers.
6. Buck converter, Boost converter and Buck-Boost converter.
7. Study of Cycloconverter.
8. Simulation of single phase Half wave and Full wave rectifier circuit.
9. Simulation of controlled rectifier with R and RL load.
10. Simulation of controlled rectifier with (i) Source Inductance (ii) Freewheeling diode.

Course
al al
ELXL7 Digital Signal

--- 02 --- 04 --- --- 04
03 Processing
Examination Scheme
Course Theory Marks

Work Practical
ELXL7 Digital Signal

--- --- --- --- 25 25 50
03 Processing
Instructions
1. Minimum 6 experiments and one course project must be submitted by each student.
2. Simulation tools like Matlab/Scilab can be used.
3. Processor based experiments/mini projects can be included.
The Term work assessment can be carried out based on the different tools and the
rubrics decided by the concerned faculty members and need to be conveyed to the
students well in advanced
Tentative List of Experiments:

1. Study of Convolution, Series and Parallel Systems
2. Generation of Basic Signals
3. Computation of DFT and it's inverse
4. Computation of FFT and comparison of frequency response of DFT and FFT
5. Computation of DFT
6. IIR Butterworth filter design using IIT technique
7. IIR Chebyshev filter design using BLT technique
8. Design of FIR filter using hamming and hanning window, low pass and high pass
filter

Course
al al
NEURAL
ELXD
NETWORKS
OLO70 --- 02 --- 04 --- --- 04
& FUZZY
31
LOGIC
Examination Scheme
Course Theory Marks

Work Practical
NEURAL
ELXD
NETWORKS
OLO70 --- --- --- --- 25 25 50
& FUZZY
31
LOGIC
Term Work:
The term work shall consist of
1. At least six experiments using MATLAB Or C/C++ or Java covering the whole of syllabus, duly
recorded and graded.
2. One seminar and Two assignments to be included covering at least 60% of the syllabus.
The distribution of marks for term work shall be as follows:
The Term work assessment can be carried out based on the different tools and the rubrics
decided by the concerned faculty members and need to be conveyed to the students well in
advanced The final certification and acceptance of term-work ensures the satisfactory performance of
laboratory work and minimum passing in the term-work.
Suggested List of experiments: using C/C++ or Matlab or java
 Activation functions
 McCulloch Pitts Neuron Model
 Hebbian learning
 Single layer perceptron neural network
 Multi-layer perceptron neural network
 Error Back propagation neural network

 Kohonen Self-organizing Feature Maps
 Associative memory network
 Fuzzy relations
 Defuzzification methods
Suggested List of seminar :
 Classification of upper case and lower case letters.

 Classification of numbers 0-9.
 BPN for training a hidden layer.
 Implement a heteroassociative memory network to implement any pattern.
 Implement discrete Hopfield network for letters A-E.
 Implement BAM for a pattern of 5X3 array.
 Fuzzy Logic controller design – washing machine / vehicle speed control.
Oral Examination:
Oral will be based on any experiment performed from the list of experiment given in the syllabus and the
entire syllabus.
Subject Code Subject Teaching Scheme (Hrs.) Credits Assigned

Name
ELXLDLO7032 Advanced - 2 -- - 01 -- 01
Networking
Technologies
Laboratory
Subject Code Subject Examination Scheme

Name Theory Marks Term Practical Oral Total
1 2 Test 1 Exam
and Test
2
ELXLDLO7032 Advanced - - - - 25 -- 25 50
Networking
Technologies
Laboratory
Course Objectives:
Lab session includes seven experiments plus one presentation on any one of the suggested topics The Term
work assessment can be carried out based on the different tools and the rubrics decided by the concerned faculty
members and need to be conveyed to the students well in advanced
Suggested Experiments:
1. Evaluation of home/campus network
2. GSM-GPS protocol implementation
3. Bluetooth protocol implementation
4. ZigBee protocol implementation
5. Wi-Fi protocol implementation
6. Study of NMAP
7. Study of SNMP
8. Study of Ethernet.
Suggested topics for presentation:
1. MANET
2. VOFR
3. VOIP
4. X.25
5. Body area network
6. RFID
7. Web Security
8. Compression Techniques
9. Security attacks
10. NAT
11. College campus network
12. Fiber Optics types, advantages disadvantages

13. WSN

Name
ELXLDLO7033 Robotics - 2 -- - 01 -- 01

1 2 Test 1 Exam
and Test
2
ELXLDLO7033 Robotics - - - - 25 -- 25 50
Term Work:
The term work shall consist of
3. At least eight experiments using MATLAB / Scilab covering the whole of syllabus, duly
recorded and graded.
4. Two assignments to be included covering at least 60% of the syllabus.
The distribution of marks for term work shall be as follows:
The Term work assessment can be carried out based on the different tools and the rubrics
decided by the concerned faculty members and need to be conveyed to the students well in
advanced The final certification and acceptance of term-work ensures the satisfactory performance of
laboratory work and minimum passing in the term-work.
Suggested List of experiments: using Matlab / Scilab
 Forward kinematics
 Inverse kinematic
 Dynamic analysis
 Joint-space trajectory
 Cartesian-space trajectory
 Template matching
 Iterative processing
 Segmentation

Name
ELXLDLO7034 IC - 2 -- - 01 -- 01
Technology

1 2 Test 1 Exam
and Test
2
ELXLDLO7034 IC - - - - 25 -- 25 50
Technology
Course Objectives:
Lab session includes seven experiments plus one presentation on any one of the suggested topics. The Term
work assessment can be carried out based on the different tools and the rubrics decided by the concerned faculty
members and need to be conveyed to the students well in advanced
Suggested Experiments:
Following list of experiments covers the complete syllabus prescribed in IC Technology course. It is formulated
in such a way that it allows student to explore various process, layout and device simulation tools. Detail
analysis of observations should be recorded in the project book. Tools to be used are Microwind, SUPREME,
Electric, Visual TCAD, Mentor Graphics Pyxis and tools available on nanohub. Linux based operating system
is preferred to do simulations.
1. Draw and simulate layout for the CMOS inverter. Carry out static as well as transient simulation. Analyze
CMOS inverter for i) (W/L)pmos>(W/L)nmos ii) (W/L)pmos=(W/L)nmos iii) (W/L)pmos<(W/L)nmos. Do parasitic
extraction. Feed these parasitic in circuit simulator and do layout versus schematic verification.
2. Draw and simulate layout for the following circuits. Size them with respect to reference inverter.
a. CMOS NAND
b. CMOS NOR
Also observe the effect of different types of design rules on above circuits and tabulate the comparative results.
3. Draw and simulate layout for the given equation (each student will get different equation [y=
]) with the following design style
a. Static CMOS
b. Transmission gate
c. Dynamic Logic
4. Draw and simulate layout for 6T SRAM cell. Size the SRAM cell for 1) lowest area 2) high reliability
5. Draw and simulate layout for the following circuits.
a. SR latch
b. D flip Flop
6. Simulate oxidation process with Deal-Grove model for different conditions (e.g. oxidation type, orientation,
time, temperature, thickness etc.) and comment on the results obtained.
7. Simulate diffusion process for different conditions (e.g. source, time, temperature, dopant etc.) and comment
on the results obtained.
8. Simulate Si PN junction for various structure and environmental conditions and comment on the results
obtained. Repeat the entire simulation for Ge diode.
9. Simulate MOS capacitor (Classical Simulation) for single gate device for a typical value of fixed charge
density and interface trap charge density in gate insulator. Do the AC analysis and comment on the results
obtained.
10. Simulate MOS capacitor (Quantum Simulation) for single gate device for a typical value of fixed charge
density and interface trap charge density in gate insulator. Do the AC analysis and comment on the results
obtained.
Suggested topics for presentation:

Presentation on any Novel device or process.

Electronics Engineering Syllabus Sem VII Mumbai University

Uploaded by

Copyright:

Available Formats

Electronics Engineering Syllabus Sem VII Mumbai University

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Electronics Engineering Syllabus Sem VII Mumbai University

Uploaded by

Copyright:

Available Formats

AC19.04.

Revised syllabus (Rev- 2016) from Academic Year 2016 -17

As per Choice Based Credit and Grading System

B.E. (Electronics Engineering) – Semester VII

ELX702 Power Electronics 04 -- --- 04 --- --- 04

ELX703 Digital signal processing 04 -- --- 04 --- --- 04

ELXDLO703X Department Level Optional course

ILO701X Institute Level Optional Course I# 03 --- --- 03 --- --- 03

ELXL701 Instrumentation System Design

ELXL702 Power Electronics Lab. 02 01 --- 01

ELXL703 Digital signal processing Lab. 02 01 --- 01

ELXL704 Project-I --- 06 --- --- 03 --- 03

ELXLDLO703 Dept. Level Optional course III

TOTAL 19 14 --- 19 07 --- 26

Examination Scheme – Semester VII

ELX 702 Power Electronics 20 20 20 80 03 --- --- 100

ELX 703 Digital signal processing 20 20 20 80 03 --- --- 100

ELXDLO703X Department Level Optional 20 20 20 80 03 --- --- 100

ILO701X Institute Level Optional Subject 20 20 20 80 03 --- --- 100

ELXL701 Instrumentation System Design 25 25 50

ELXL702 Power Electronics Lab. 25 25 50

ELXL703 Digital signal processing Lab. 25 25 50

ELXL704 Project-I --- --- --- --- --- 50 50 100

ELXLDLO703 Dept. Level Optional courses III 25 25 50

Total 100 100 100 400 15 150 150 800

University of Mumbai, B. E. (Electronics Engineering), Rev 2016 7

ELXDLO7032 Advance Networking Technologies ILO7012 Reliability Engineering

ELXDLO7033 Robotics ILO7013 Management Information System

ELXDLO7034 Integrated Circuit Technology ILO7014 Design of Experiments

ILO7015 Operation Research

ILO7016 Cyber Security and Laws

ILO7017 Disaster Management and Mitigation Measures

ILO7018 Energy Audit and Management

ELXDLO8041 Advanced Power Electronics ILO8021 Project Management

ELXDLO8042 MEMS Technology ILO8022 Finance Management

ELXDLO8043 Virtual Instrumentation ILO8023 Entrepreneurship Development and Management

ELXDLO8044 Digital Image Processing ILO8024 Human Resource Management

ILO8025 Professional Ethics and CSR

ILO8026 Research Methodology

ILO8027 IPR and Patenting

ILO8028 Digital Business Management

ILO8029 Environmental Management

University of Mumbai, B. E. (Electronics Engineering), Rev 2016 9

B.E. (Electronics Engineering)

ELX702 Power Electronics 04 -- --- 04 --- --- 04

ELX703 Digital signal processing 04 -- --- 04 --- --- 04

Department Level Optional course

ILO701X Institute Level Optional Course I# 03 --- --- 03 --- --- 03

Instrumentation System Design

ELXL702 Power Electronics Lab. 02 01 --- 01

ELXL703 Digital signal processing Lab. 02 01 --- 01

ELXL704 Project-I --- 06 --- --- 03 --- 03

ELXLDLO703 Dept. Level Optional course III

TOTAL 19 14 --- 19 07 --- 26

Department Level Optional course

ELX801 Internet of Things Lab. 02 01 --- 01

Analog and Mixed VLSI Design

ELXL803 Project-II --- 12 --- --- 06 --- 06

ELXLDLO804 Department Level Optional Courses