Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 31 views

    Floboss™ 107 Communication Modules: Fb107:Com Product Data Sheet

    Uploaded by

    Ricardo Hernan Gomez B

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Floboss™ 107 Communication Modules: Fb107:Com Product Data Sheet

    Uploaded by

    Ricardo Hernan Gomez B
    31 views4 pages

    Original Title

    communication-modules-fb107-com-en-132702

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    31 views4 pages

    Floboss™ 107 Communication Modules: Fb107:Com Product Data Sheet

    Uploaded by

    Ricardo Hernan Gomez B

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    FB107:COM Product Data Sheet

    D301237X012 July 2013

    FloBoss™ 107 Communication Modules


    Communication modules add communication ports to a module is installed in slot 2, the communication port (COM2)
    FloBoss™ 107 Flow Manager (“FB107”). The FB107’s central on the CPU is redirected to the type of module installed in slot
    processor unit (CPU) provides three built-in communication 2. Use ROCLINK™ 800 Configuration Software to configure
    ports. You can add one communication module, resulting in a the modules.
    maximum of four communication ports per FB107.
    Each communication module uses a separate channel from
    The communication modules provide solutions to suit the other modules and has a common ground (“single-
    applications including: ended”). The field interface protects the electronics in the
    module. Each module reduces the effect of noise on
     EIA-232 (RS-232) provides point-to-point asynchronous communication errors through filtering.
    serial communications. EIA-232 (RS-232) communications
    commonly provide the physical interface for connecting LEDs display the RX (receive) and TX (transmit) signals for the
    serial devices, such as gas chromatographs and radios. The EIA-232 (RS-232) communication module. LEDs display the A
    EIA-232 (RS-232) communication module provides (transmit/receive+) and B (transmit/receive −) signals for the
    essential hand-shaking lines required for radio EIA-485 (RS-485) communication module.
    communications, including Request to Send (RTS).
    The FB107 supports communication protocols, including ROC
     EIA-485 (RS-485) provides asynchronous serial protocol and Modbus protocol. An FB107 can act as a Modbus
    communications for multi-drop units on a serial network slave device (ASCII or RTU) or it can function as a Modbus host
    over long distances using inexpensive twisted-pair cables. on COM1, 2, or 3.
    Each communication module plugs into a module slot on the
    main FB107 unit, which provides power and control signals to
    activate COM3.You can install a communication module in
    slot 1 or 2 on the main FB107. When a communication

    EIA-232 (RS-232) Communication Module EIA-485 (RS-485) Communication Module

    Remote Automation Solutions


    FB107:COM July 2013

    FB107 EIA-232 (RS-232) Communication Module


    Field Wiring Terminals

    Terminal Label Definition


    1 TX Transmit
    2 RX Receive
    3 RTS Request To Send
    4 NC No Connection
    5 NC No Connection
    6 GND – (Common)

    Communications
    Meets EIA-232 (RS-232) standard for single-ended data transmission over distances of up to 15 m (50 ft).
    Data Rate Selectable from 300 to 115.2 K baud.
    Format Asynchronous, 7 or 8-bit (software-configurable) with full handshaking.
    Parity None, odd, or even (software-configurable).
    LEDs RX (receive) and TX (transmit) signals for COM3 on the EIA-232 (RS-232) communication
    module.
    Protocols ROC, Modbus host and slave (RTU or ASCII).

    Power
    Power Requirements 30 mW, supplied by backplane.
    Receive 21 mW
    Transmit 50 mW

    Physical
    Dimensions 82.55 mm H by 25.4 mm W by 127 mm L
    (3.25 in. H by 1.0 in. W by 5.0 in. L)
    Weight 90.7 g (3.2 oz.)
    Wiring 16 to 24 AWG at the removable terminal block.

    Environmental
    Same as the unit in which it is installed.

    Approvals
    Same as the unit in which it is installed.

    2 www.EmersonProcess.com/Remote
    July 2013 FB107:COM

    FB107 EIA-485 (RS-485) Communication Module

    Field Wiring Terminals

    Terminal Label Definition


    1 A Receive / Transmit +
    2 B Receive / Transmit –
    3 NC No Connection
    4 NC No Connection
    5 NC No Connection
    6 GND – (Common)

    Communications
    Meets EIA-485 (RS-485) standard for differential data transmission over distances of up to 1220 m (4000 ft).
    Data Rate Selectable from 300 to 115.2 K baud.
    Format Asynchronous, 7 or 8-bit (software-configurable).
    Parity None, odd, or even (software-configurable).
    LEDs A and B indicate communication activity status.
    Protocols ROC, Modbus host and slave (RTU or ASCII).

    Power
    Power Requirements 30 mW, supplied by backplane.
    Receive 27 mW
    Transmit 35 mW

    Physical
    Dimensions 82.55 mm H by 25.4 mm W by 127 mm L
    (3.25 in. H by 1.0 in. W by 5.0 in. L)
    Weight 90.7 g (3.2 oz.)
    Wiring 16 to 24 AWG at the removable terminal block.

    Environmental
    Same as the unit in which it is installed.

    Approvals
    Same as the unit in which it is installed.

    www.EmersonProcess.com/Remote 3
    FB107:COM July 2013

    Headquarters:
    Emerson Process Management
    Remote Automation Solutions
    6005 Rogerdale Road
    Houston, TX 77072 U.S.A.
    T +1 281 879 2699 | F +1 281 988 4445
    www.EmersonProcess.com/Remote
    Europe:
    Emerson Process Management
    Remote Automation Solutions
    Unit 8, Waterfront Business Park
    Dudley Road, Brierly Hill
    Dudley UK DY5 1LX
    T +44 1384 487200 | F +44 1384 487258
    www.EmersonProcess.com/Remote
    North American/Latin America:
    Emerson Process Management
    Remote Automation Solutions
    6005 Rogerdale Road © 2006-2013 Remote Automation Solutions, a business unit of Emerson Process
    Houston TX USA 77072 Management. All rights reserved.
    T +1 281 879 2699 | F +1 281 988 4445 Bristol, Inc., Bristol Canada, BBI SA de CV and Emerson Process Management Ltd, Remote
    www.EmersonProcess.com/Remote Automation Solutions division (UK), are wholly owned subsidiaries of Emerson Electric Co.
    Middle East/Africa: doing business as Remote Automation Solutions, a business unit of Emerson Process
    Emerson Process Management Management. FloBoss, ROCLINK, Bristol, Bristol Babcock, ControlWave, TeleFlow, Helicoid,
    Remote Automation Solutions OpenEnterprise, and METCO are trademarks of Remote Automation Solutions. AMS,
    Emerson FZE PlantWeb and the PlantWeb logo are marks of Emerson Electric Co. The Emerson logo is a
    P.O. Box 17033 trademark and service mark of the Emerson Electric Co. All other marks are property of their
    Jebel Ali Free Zone – South 2 respective owners.
    Dubai U.A.E. The contents of this publication are presented for informational purposes only. While every
    T +971 4 8118100 | F +971 4 8865465 effort has been made to ensure informational accuracy, they are not to be construed as
    www.EmersonProcess.com/Remote warranties or guarantees, express or implied, regarding the products or services described
    Asia-Pacific: herein or their use or applicability. Remote Automation Solutions reserves the right to modify
    Emerson Process Management or improve the designs or specifications of such products at any time without notice. All sales
    Remote Automation Solutions are governed by Remote Automation Solutions’ terms and conditions which are available
    1 Pandan Crescent upon request. Remote Automation Solutions does not assume responsibility for the
    Singapore 128461 selection, use or maintenance of any product. Responsibility for proper selection, use and
    T +65 6777 8211| F +65 6777 0947 maintenance of any Remote Automation Solutions product remains solely with the purchaser
    www.EmersonProcess.com/Remote and end-user.

    Remote Automation Solutions

    You might also like