Embedded Power AC-DC and DC-DC Products PDF

Embedded Power for
Business-Critical Continuity™
Embedded Power AC—DC and DC—DC Products

Emerson Network Power
5810 Van Allen Way
Carlsbad, CA 92008
USA
T + 1 (760) 930 4600

F + 1 (760) 930 4709
You may have read about a recent US Court case in which a small number of products offered by Astec and others,
specifically certain unregulated and semi-regulated DCDC bus converters, when used in an intermediate bus architecture
power system, were accused of infringing some patents.
We would like to clarify the situation below and emphasize that the vast majority of our products and solutions are not
impacted.
On December 21, 2010, a jury in the U.S. Federal District Court for the Eastern District of Texas reached a verdict finding
that certain unregulated and semi-regulated DC/DC bus converters manufactured by eleven (11) defendants, including
Astec and Artesyn, when used in an intermediate bus architecture power system infringe one or more patents owned by
SynQor, Inc.
The court entered a partial judgment on December 29 confirming the jury verdict. Astec and Artesyn dispute the jury’s
verdict and partial judgment and continue to believe that SynQor’s patents are invalid. Astec and Artesyn further believe
that the United States Patent and Trademark Office’s recent decision to re-examine each asserted SynQor patent
because substantial new questions of patentability exist casts further doubt on the jury verdict. We intend to appeal any
final judgment that may be entered against Astec and Artesyn.
However, in light of the jury’s verdict, Astec has taken steps to suspend the supply of accused unregulated and semi-
regulated bus converters to customers in the United States and to make shipments outside of the United States
conditional on the customer’s acceptance of a restriction not to incorporate the bus converters into products that will be
sold, offered for sale, or imported into the United States as part of an intermediate bus architecture power system without
first obtaining permission from SynQor.
It is important to note that the Court’s partial judgment only applies to unregulated and semi-regulated bus converters, in
the latter case, when used in an intermediate bus architecture power system. The standard products that are impacted
are listed below
IMPACTED PRODUCTS

ITEM NUMBER

AED13B50
AVQ220B-‐48S12
IBC42AQT4812
7000943-‐0000
AED17Q50 AVQ360W-‐48S12 IBC43AEN4896 7000965-‐0000
AEQ42B50 AVQ400B-‐48S12 IBC60AQN4896 7000984-‐Y000
ALD13B50 IBC17AEW4812 AB0240 7001002-‐0000
ALD17Q50 IBC25AET4812 ABQ480 7001002-‐J001
ALD17Q60 7001465-‐Y000 7001137-‐J000 7001002-‐J002
ALO15B50 IBC28AQW4812 7001035-‐0000 7001002-‐J003
ALQ25B50 IBC30AQS4812 7000838-‐0000 7001443-‐J000
ALQ42B50 IBC32AEN4896 7000869-‐0000 TQN20A48S12
7001109-‐0000 IBC34AQS4812 7000869-‐0001 TQN25A48S12
7001109-‐J000 IBC38AQT4812 7000869-‐0002
ATC210 7000869-‐Y001
ATC230 7000869-‐Y002
ATC250

The jury verdict and partial judgment do not impact any of the following products or power supply architectures:
1) Fully regulated bus converters, such as Astec’s TQW14, AVQ300 and AVQ400, even if used to power one or more
non-isolated DC/DC converters (sometimes known as “POLs”);
2) Isolated fully regulated DC/DC converters such as AVO120, ALD07A48N, ALO20A48N, BXB150-48S12FLTJ,
LES50A48-1V2REY, LQS100A48-1V5REY and RFB300-24S12-R5TY;
3) AC to 12V “front-end” power supplies, even if used to power one or more non-isolated DC/DC converters (sometimes
known as “POLs”);
4) Non-Isolated DC/DC converters (sometimes known as “POLs”) to the extent that such non-Isolated DC/DC converters
are not combined with an unregulated or semi-regulated bus converter in violation of any of SynQor’s asserted patents;
5) Voltage Regulator Modules (VRMs); and
6) IPM300 Dual 48V ATCA Input Power Modules;
7) High Power fully regulated DC/DC bricks such as AIF04ZPFC, AIF25H300N and AIH20B300.
All of these products continue to be available from Astec, along with the rest of our broad range of power conversion
solutions.
Emerson Network Power Page 2 of 2

Embedded Power for
Business-Critical Continuity™
Embedded Power AC—DC and DC—DC Products

Contents
AC—DC Power Supplies DC—DC Converters
Low Power 2-500 W ATCA Modules
Open frame/enclosed 1-4 outputs 7 Bus Converters 44
External power adapters 13 Industry Standard Isolated
Healthcare Power Up to 4860 W Sixteenth-Brick 45
1-21 outputs 16 Eighth-Brick 46
Medium Power (MP) Up to 1200 W Quarter-Brick 47
1-10 outputs standard (up to 21 available) 20 Half-Brick 49
RF Power Brick 50
Intelligent Medium Power (iMP) Up to 1500 W Bus Converters 51
Up to 21 outputs 23
Industry Standard Non-Isolated
Intelligent High Power (iVS) Up to 4920 W C-Class 52
1-18 outputs 27 E-Class 55
Bulk Power (HPS & UFE) 350-6000 W F-Class 56
Available 1U and 3U 31 POLA Products 57
Compatible racks hold up to 4 modules Memory Power 59
VRM Processor Power 59
Distributed Power (DS) 450-2900 W
Available 1U and 2U 34 High Power 300 V Input
Compatible racks hold up to 5 modules Power Factor Correction (PFC) 60
300 V Full-Brick 60
DIN Rail (ADN) 24 V 120-480 W
300 V Half-Brick 60
Slim DIN rail format with PFC 39
300 V Quarter-Brick 60
SEMI F47 and Hazardous Locations
Low Power Industrial
MicroTCA 600 W
Industrial Standard Products 62
MTC600 Series 40
Terms and Conditions 64
Index 66
2
For additional Information go to
Emerson.com/EmbeddedPower
The Embedded Power business of Emerson Network Power offers thousands Local Support
of standard, modified and custom power supply products. Every standard Our regional sales offices are ready to provide
product in our extensive portfolio is designed to help speed time to market expert local applications and sales support. In
more cost effectively and with less risk. addition, an extensive network of manufacturers’
representatives and distributors bring our
Emerson Network Power’s global view of power provides you with an
products to you. Please call for locations of
unprecedented level of supply and support.
sales offices near you or visit our website at
Emerson.com/EmbeddedPower.
Our research, development, sales and support teams throughout the world
are dedicated to meeting your needs today and in the future with innovative
power solutions. We have invested in state-of-the-art manufacturing Americas (USA)
Telephone: +1 760 930 4600
facilities and advanced global distribution systems to quickly manufacture
Facsimile: +1 760 930 0698
and deliver the power products you need. We can quickly respond to your
changing demands and have the ability to support you locally or worldwide. Europe (UK)
Telephone: +44 (0) 1384 842 211
Facsimile: +44 (0) 1384 843 355
Uniting the well-known Astec and Artesyn brands, the combined strength
and experience of these companies, fused with pedigrees of quality, Asia (HK)
innovation and a deep understanding of our customers’ needs, positions Telephone: +852 2176 3333
Emerson Network Power for continued growth and leadership in the Facsimile: +852 2176 3888
embedded power markets.
Technical Support
This catalog lists key performance data for all standard ac-dc power supplies
and dc-dc converters from the Embedded Power business of Emerson Americas (USA)
+1 888 412 7832 (North America)
Network Power. It is designed to provide you with a fast, easy-to-use means
of identifying the ideal power source for your application. Europe, Middle East and Africa (EMEA)
0 800 0321546 (in the UK)
+44 800 0321546 (outside the UK)
After selecting the product that you need from this catalog, we recommend
that you visit our website to obtain more detailed information. You will find Asia
that you can quickly download product datasheets and safety certificates, +400 88 99 130 (China)
+86 29 8883 6505 (outside China)
check stock levels at our extensive global distribution network, and request
evaluation samples. You can even ask one of our experts for technical
advice, or register for the ‘MyPower’ community portal to gain access to Email:
tools, a knowledge base and support to help guide you to the best power America and EMEA
techsupport.embeddedpower@emerson.com
solution for your needs.
Asia
TSXA.embeddedpower@emerson.com
3
For additional information go to
Accelerate, Improve & Enhance the Capabilities

of Your Next Power Product
At Emerson Network Power — Embedded Power, our Innovation for the Next Generation
engineers have been designing and developing power Many of our new products incorporate powerful programming,
monitoring and self-testing software that provide system
supply products for over 35 years. Our products have
engineers with critical data to manage power consumption. High
helped pave the way for advancements in numerous efficiency, green design and manufacturing technologies, and
applications in the communications, industrial, innovative demand and supply replenishment systems collectively
deliver key business efficiencies and new design capabilities. All
computing, data storage and healthcare markets.
aimed at helping your company increase its overall return on
investment. Emerson Network Power can help take your new
When developing product, time is money. Every step in the product design or redevelopment efforts to the next level with
process that you can eliminate, speed up, or make more a shorter time-to-profit, higher reliability and greater scalability.
effective accelerates your time to market and lowers your Emerson benefits include:
R&D costs. Major advantages of partnering with Emerson
Network Power include: 4IPSUFS5JNFUP.BSLFU¯PVSMBUFTUQSPHSBNNBCMFQPXFS
#SPBEFTUQPXFSTVQQMZQSPEVDUMJOFT TPMVUJPOT¯TVDIBTPVSMJOFPG'1("QPXFSQSPEVDUTBOEPVS
)JHIMZWFSTBUJMFQPXFSTVQQMJFT modular, medium/high power iMP series provide you with a
shorter time-to-market and offer faster test and qualification
-PXFOFSHZDPOTVNQUJPO
than traditional analog power solutions, at a cost which rivals
&DPGSJFOEMZQSPEVDUT less flexible power supplies.
4QBDFFGGJDJFOUQPXFS
3FMJBCJMJUZRVBMJUZ )JHIFS3FMJBCJMJUZ¯NPWJOHGSPNJOGMFYJCMFGJYFEPVUQVUBOBMPH
power supplies to programmable power solutions enables our
8PSMEXJEFEJTUSJCVUPSOFUXPSL
engineers to more extensively test and document our products
7BTULOPXMFEHF FYQFSJFODFFYQFSUJTF
to ensure they meet or exceed your reliability requirements.
And we provide a wide range of on-line environmental, EMC
compliance and safety certification to help speed your product
design process.
(SFBUFS4DBMBCJMJUZ¯NBOZPGPVSMBUFTUQPXFSTPMVUJPOTBSF
scalable, programmable and plug-compatible with our earlier-
generation products, enabling you to quickly address changes
or enhancements to your systems. You can now satisfy most
changes in power requirements simply by reprogramming the
QPXFSTVQQMZ¯BOEJGZPVSOFFETDIBOHFSBEJDBMMZ ZPVDBO
easily swap to a more capable solution. This inherent scalability
eliminates redesign costs, reduces testing time and provides
you with greater design flexibility.
4
MyPower Community Portal
Discover. Communicate. Collaborate.
MyPower is a free community portal that provides

a variety of tools and resources including:
Community
Utilizing the tools and resources provided will
increase your standard knowledge base of our industry.
Resources include:
*OEVTUSZ-JOLT
8IBU´T/FX
5SBEF4IPXT
5PPMT$BMDVMBUPST
Knowledge Base
Familiarize yourself with our products and services. This
section is designed to help build your industry knowledge.
1SPEVDU7JEFPT
8IJUF1BQFST
*OEVTUSZ#PPLT
&EVDBUJPOBM1SPEVDU7JEFPT
Support
Emerson Network Power strives to support your needs.
In this section you will find:
'BDUPSZ2VBMJUZ 4BGFUZBOE&OWJSPONFOUBM$FSUJGJDBUJPOT
To sign up for a free MyPower account go to

Emerson.com/MyPower
Stay Connected.
The latest happenings are being posted on Twitter, Facebook and YouTube! Sign up for one
or all of the sites below and stay connected with Emerson Network Power — Embedded Power!
www.twitter.com/EmersonEmPower
www.facebook.com/pages/Emerson-Network-Power-Power-Supplies/53805116595
www.youtube.com/user/EmersonNetworkPower
5
AC—DC Power Supplies
Emerson Network Power is widely
acknowledged as an industry leader and
produces an exceptionally wide range of
AC-DC power conversion products.
6
Low Power
Open frame/enclosed 1-4 outputs
25-500 Watts
Special Features
All models feature: Many models feature:
*OEVTUSZTUBOEBSEGPPUQSJOUT 0WFSMPBEQSPUFDUJPO &/DPNQMJBODF "EKVTUBCMFPVUQVUT
8JEFSBOHF"$JOQVU #VJMUJO&.*GJMUFSJOH 4VQFSWJTPSZPVUQVUT 77
1PXFSGBJM
'VMMQPXFSUP$ &YUFOTJWFTBGFUZBQQSPWBMT 8JEFBEKVTUGMPBUJOHth output 8JEFBEKVTUPOTJOHMFPVUQVU
)JHIEFNPOTUSBUFE.5#' %FSBUFEPQFSBUJPOUP$ 4JOHMFXJSFDVSSFOUTIBSF models
0WFSWPMUBHFQSPUFDUJPO .FEJDBMBQQSPWBMT %FSBUFEPQFSBUJPOUP$
3FNPUFTFOTF
Output Power Output

[Forced Air] Free Air V1 V2 V3 V4 Size W x L x H (mm) Model
[25 W] 25 W NLP25 Series

5 V @ 5 A* 2.07” x 4” x 0.91” NLP25-7605J
12 V @ 2.1 A* (52.57 x 101.6 x 23.2) NLP25-7612J
24 V @ 1.0 A* NLP25-7624J
48 V @ 0.5 A* NLP25-7617J
[20 W] 20 W 5V@2A 12 V @ 0.8 A NLP25-7629J
5V@2A 12 V @ 0.8 A -5 V @ 0.1 A NLP25-7607J
5V@2A 12 V @ 0.8 A -12 V @ 0.1 A NLP25-7608J
[40 W] 25 W LP20 Series
5 V @ 5 A [8 A]* 3” x 5” x 1.2” LPS22
(1) 12 V @ 2.1 A [3.3 A]* (76.2 x 127 x 30.5) LPS23
15 V @ 1.7 A [2.7]* LPS24
24 V @ 1.1 A [1.8 A]* LPS25
5 V @ 3 A [4 A] 12 V @ 1.5 A [2 A] -12 V @ 0.5 A [0.7 A] LPT22
5 V @ 4 A [5 A] 12 V @ 0.5 A [0.7 A] -12 V @ 0.5 A [0.7 A] LPT23
5 V @ 3 A [4 A] 12 V @ 1.5 A [2 A] -5 V @ 0.5 A [0.7 A] LPT24
5 V @ 3 A [4 A] 15 V @ 1.5 A [2 A] -15 V @ 0.5 A [0.7 A] LPT25
[47 W] Enclosed LCT43-E
5 V @ 4 A [7 A] 12 V @ 1 A [1.2 A] -12 V @ 0.5 A [0.5 A] 3.2” x 6.2” x 1.5” LCT43-E
(81.3 x 157.5 x 38.1)

3.3 V @ 9 A* 2.5” x 4.25” x 1.15” NLP40-76S3J
12 V @ 4 A* (63.5 x 108 x 29.2) NLP40-7612J
5 V @ 9 A* NLP40-7605J
12 V @ 4 A* NLP40-7612J
(1) 15 V @ 3.3 A* NLP40-7615J
24 V @ 2 A* NLP40-7624J
48 V @ 1 A* NLP40-7617J
5 V @ 4.5 A 12 V @ 3 A NLP40-7629J
12 V @ 2.1 A -12 V @ 2.1 A NLP40-7627J
3.3 V @ 4.5 A 12 V @ 3 A -12 V @ 0.5 A NLP40-76T366J
5 V @ 4.5 A 12 V @ 3 A -12 V @ 0.5 A NLP40-7608J
5 V @ 4.5 A 15 V @ 2 A -15 V @ 0.5 A NLP40-7610J
Options:
[ ] Rating with 30 CFM of air
(1) Optional cover/enclosure
* Floating output
For complete product specifications, technical reference notes and available product options, go to Emerson.com/EmbeddedPower. 7
Output Power Output

[50 W] 40 W NFS40 Series

3.3 V @ 8 A* 3” x 5” x 1.2” NFS40-76S3J
5.1 V @ 8 A* (76.2 x 127 x 30.5) NFS40-7605J
12 V @ 4 A* NFS40-7612J
15 V @ 3.3 A* NFS40-7615J
(1) 24 V @ 2 A* NFS40-7624J
5.1 V @ 5 A 12 V @ 0.5 A -12 V @ 0.5 A NFS40-7628J
5.1 V @ 5 A 12 V @ 2 A -5 V @ 0.5 A NFS40-7607J
5.1 V @ 5 A 12 V @ 2 A -12 V @ 0.5 A NFS40-7608J
5.1 V @ 5 A 15 V @ 2 A -15 V @ 0.5 A NFS40-7610J
3.3 V @ 8 A [11 A]* 3” x 5” x 1.2” LPS41
5 V @ 8 A [11 A]* (76.2 x 127 x 30.5) LPS42
12 V @ 3.3 A [4.5]* LPS43
15 V @ 2.6 A [3.6 A]* LPS44
24 V @ 1.6 A [2.3 A]* LPS45
(1) 48 V @ 0.9 A [1.2 A]* LPS48
3.3 V @ 4 A [7 A] 5 V @ 1.5 A [2 A] +12 V @ 0.5 A [0.7 A] LPT41
5 V @ 4 A [5 A] 12 V @ 2 A [2.5 A] -12 V @ 0.5 A [0.7 A] LPT42
5 V @ 6 A [8 A] 12 V @ 0.5 A [0.7 A] -12 V @ 0.5 A [ 0.7 A] LPT43
5 V @ 4 A [5 A] 12 V @ 2 A [2.5 A] -5 V @ 0.5 A [0.7 A] LPT44
5 V @ 4 A [5 A] 15 V @ 2 A [2.5 A] -15 V @ 0.5 A [ 0.7 A] LPT45
5 V @ 4 A [5 A] 24 V @ 1 A [1.5 A] +12 V @ 0.5 A [0.7 A] LPT46
[60 W] 45 W NPS40-M Series
5 V @ 8 A [11 A] 2” x 4” x 1” NPS42-M
12 V @ 3.75 A [5 A] (50.8 x101.6 x 25.4) NPS43-M
15 V @ 3 A [4 A] NPS44-M
(1)
24 V @ 1.9 A [2.5 A] NPS45-M
48 V @ 0.94 A [1.25 A] NPS48-M
3.3 V @ 8 A 5V@3A 12 V @ 0.5 A 2” x 4” x 1.3” LPT51
5V@8A 12 V @ 3 A -12 V @ 0.5 A (50.8 x 101.6 x 33) LPT52
(1) 5V@8A 15 V @ 2.4 A -15 V @ 0.5 A LPT53
5V@8A 24 V @ 1.5 A 12 V @ 0.5 A LPT54
[60 W] 60 W 5 V @ 11 A* LPS52
5 V @ 11 A* LPS52 (-I)
12 V @ 5 A* LPS53
12 V @ 5 A* LPS53 (-I)
(1) 15 V @ 4 A* LPS54
24 V @ 2.5 A* LPS55
48 V @ 1.25 A* LPS58
Options:
* Floating output
*
*OEVTUSJBMWFSTJPO$VQUP$ EFSBUFE
8 For complete product specifications, technical reference notes and available product options, go to Emerson.com/EmbeddedPower.
Output Power Output


5 V @ 12 A* 3” x 5” x 1.26” NLP65-7605J
5 V @ 12 A* (76.2 x 127 x 32) NLP65-9605J(5)(
12 V @ 6.5 A* NLP65-7612J (
12 V @ 6.5 A* NLP65-9612J(5) (
(1) 24 V @ 3.5 A* NLP65-7624J (
24 V @ 3.5 A* NLP65-9624J(5) (
5V@8A 12 V @ 3 A NLP65-7629J
5V@8A 12 V @ 3 A NLP65-9629J(5)(
5V@8A 24 V @ 2 A +12 V @ 1.0 A NLP65-3322J
5V@8A 12 V @ 3 A -12 V @ 0.8 A NLP65-7608J (
5V@8A 12 V @ 3 A -12 V @ 0.8 A NLP65-9608J(5) & (
5V@8A 15 V @ 2.5 A -15 V @ 0.8 A /-1(J
5V@8A 15 V @ 2.5 A -15 V @ 0.8 A NLP65-9610J(5)(
5V@8A 24 V @ 2 A NLP65-7620J
5V@8A 24 V @ 2 A NLP65-9620J(5) (
3.3 V @ 12 A [16 A]* 3” x 5” x 1.65” LPS61
5 V @12 A [16 A]* (76.2 x 127 x 41.9) LPS62
12 V @ 5 A [6.7 A]* LPS63
15 V @ 4 A [5.3 A]* LPS64
(1) 24 V @ 2.5 A [3.3 A]* LPS65
48 V @ 1.3 A [1.7 A]* LPS68
3.3 V @ 5 A [8.5 A] 5 V @ 2.5 A [3 A] +12 V @ 0.5 A [1 A] LPT61
5 V @ 7 A [8 A] 12 V @ 3 A [3.5 A] -12 V @ 0.7 A [1 A] LPT62
5 V @ 7 A [8 A] 15 V @ 2.8 A [3.3 A] -15 V @ 0.7 A [1 A] LPT63
5 V @ 7 A [8 A] 12 V @ 3 A [3.5 A] -5 V @ 0.7 A [1 A] LPT64
5 V @ 7 A [8 A] 24 V @ 1.5 A [2 A] +12 V @ 0.7 A [1 A] LPT65
3.3 V @ 8 A [13 A] 5 V @ 4 A [13 A] 3” x 5” x 1.29”
+12 V @ 0.7 A [1 A] LPT81
(1.8-3.5 V) (3.3-5.5 V) (76.2 x 127 x 82.8)
5 V @ 8 A [13 A]
12 V @ 3 A [4 A] -12 V @ 0.7 A [1 A] LPT82
(3.3-5 V)
(1)
5 V @ 8 A [13 A]
15 V @ 2.4 A [3.2 A] -15 V @ 0.7 A [1 A] LPT83
(3.3-5 V)

12 V @ 6.7 A [9.2 A]* 4” x 7” x 1.8” LPS113
15 V @ 5.3 A [7.3 A]* (101.6 x 177.8 x 45.7) LPS114
24 V @ 3.3 A [4.6 A]* LPS115
48 V @ 1.7 A [2.3 A]* LPS118
(1), (2)
±5-25 V @ 2.5 A
5 V @ 9 A [11 A] 12 V @ 4.5 A [5 A} -12 V @ 0.7 A [1 A] LPQ112
[3 A]*
±5-25 V @ 2.5 A
5 V @ 9 A [11 A] 15 V @ 4.5 A [5 A] -15 V @ 0.7 A [1 A] LPQ113
[3 A]*
5 V @ 9 A [11 A] 12 V @ 4.5 A [5 A] -12 V @ 0.7 A [1 A] 24 V @ 3.5 A [4.5 A] LPQ114
Options:
E To order an enclosed version of the NLP65-9608J, add suffix ‘EJ’ to the end of the [ ] Rating with 30 CFM of air
model number, e.g., NLP65-9608EJ. The enclosed version includes: IEC connector, (1) Optional cover/enclosure
on/off switch, wire harness output connector and fitted cover. (2) Optional bracket
( "TBGFUZFBSUIHSPVOEQJOBOEHSPVOEDIPLFBSFBWBJMBCMFBTBOPQUJPO (5) These models feature harmonic current correction to EN61000-3-2
5PPSEFS QMFBTFBEEUIFTVGGJY³(J’ to the end of the model number * Floating output
FH/-1(J.
Output Power Output


5 V @ 15 A 24 V @ 2.5 A 12 V @ 3 A 12 V @ 3 A* 4.25” x 7” x 1.8” NFS80-7602J
5 V @ 15 A 24 V @ 2.5 A 15 V @ 3 A 15 V @ 3 A* (107.95 x 177.8 x 45.72) NFS80-7606J

5 V @ 22 A* 3” x 6.5” x 1.26” NLP110-9605J(5)
12 V @ 9.2 A* (76.2 x 165.1 x 32) NLP110-9612J(5)
24 V @ 4.6 A* NLP110-9624J(5)
48 V @ 2.3 A* NLP110-9617J(5)
5 V @ 18 A 3.3 V @ 20 A 12 V @ 1 A NLP110-9693J(5)
12 V @ 8.5 A 5 V @ 18 A -12 V @ 1 A NLP110-9608J(5)
12 V @ 9 A* 4.25” x 7” x 1.8” NFS110-7612J
24 V @ 4.5 A* (107.95 x 177.8 x 45.72) NFS110-7624J
5.1 V @ 10 A 12 V @ 5 A -12 V @ 1 A -5 V @ 1 A NFS110-7601J
5.1 V @ 10 A 12 V @ 5 A -12 V @ 1 A -5 V @ 1 A NFS110-7601PJ
(1) 5.1 V @ 10 A 15 V @ 5 A -15 V @ 1 A -5 V @ 1 A NFS110-7604J
5.1 V @ 10 A 15 V @ 5 A -15 V @ 1 A -5 V @ 1 A NFS110-7604PJ
5 V @ 10 A 24 V @ 4 A 12 V @ 5 A -12 V @ 1 A NFS110-7602J
5 V @ 10 A 24 V @ 4 A 12 V @ 5 A -12 V @ 1 A NFS110-7602PJ
[120 W] 70 W NTQ120 Series
3.3 V @ 14 A [25 A] 5 V @ 12.5 A [24 A] +12 V @ 1 A [2 A] -12 V @ 0.5 A [1 A] 4” x 7” x 1.5” NTQ123
3.3 V @ 14 A [25 A] 5 V @ 12.5 A [24 A] +12 V @ 1 A [2 A] -12 V @ 0.5 A [1 A] (101.6 x 177.8 x 38.1) NTQ123-DC

3.3 V @ 16 A [26 A]* 3” x 5” x 1.29” LPS121
5 V @ 16 A [26 A]* (101.6 x 177.8 x 38.1) LPS122
12 V @ 6.6 A [10.8 A]* LPS123
(1) 15 V @ 5.3 A [8.6 A]* LPS124
24 V @ 3.4 A [5.4 A]* LPS125
48 V @ 1.7 A [2.7 A]* LPS128
[130 W] 80 W LPT100-M Series
3.3 V @ 13 A [18 A] 5 V @ 5 A [9 A] 12 V @ 1 A [2.3 A] 2” x 4” x 1.28” LPT101-M
5 V @ 13 A [18 A] 12 V @ 5 A [9 A] -12 V @ 1 A [2 A] (50.8 x 101.6 x 32.7) LPT102-M
5 V @ 13 A [18 A] 15 V @ 4 A [7.2 A] -15 V @ 1 A [1.5 A] LPT103-M
(1)
5 V @ 13 A [18 A] 24 V @ 1.5A [3 A] 12 V @ 1 A [2.3 A] LPT104-M
5 V @ 12 A [25 A] -12 V @ 1 A [1.5 A] ±3.3-25 V @ 4” x 7” x 1.5”
12 V @ 5 A [6 A] LPQ142
(3.3-5 V) (-12-15 V) 1.5 A [4.5 A]* (101.6 x 177.8 x 38.1)
Options:
P Power fail detect option available, please add the suffix “P” to the model; (1) Optional cover/enclosure
e.g., NFS110-7601PJ (5) These models feature harmonic current correction to EN61000-3-2
[ ] Rating with 30 CFM of air * Floating output
Output Power Output

[150 W] 100 W TLP150 Series

12 V @ 12.5 A* 3” x 5” x 1.25” TLP150R-96S12J(5) F
24 V @ 6.3 A* (76.2 x 127 x 31.75) TLP150R-96S24J(5) F
36 V @ 4.2 A* TLP150R-96S36J(5)
(1) 48 V @ 3.2 A* TLP150R-96S48J(5) F
[150 W] 100 W LPS100-M Series

5 V @ 16 A [24 A]* 2” x 4” x 1.29” LPS102-M
12 V @ 8.3 A [12.5 A]* (50.8 x 101.6 x 33) LPS103-M
15 V @ 6.7 A [10 A]* LPS104-M
(1)
24 V @ 4.2 A [6.3 A]* LPS105-M
48 V @ 2.1 A [3.1 A]* LPS108-M
[150 W] 110 W LP150 Series
4.25” x 8.5” x 1.5”
5 V @ 22 A [30 A]* LPS152
(108 x 215.9 x 38.1)
(1)
12 V @ 9.1 A [12.5 A]*
LPS153
(12-15 V)
24 V @ 4.5 A [6.2 A]*
LPS155
(24-28 V)
±5-25 V @ 2.5 A
5 V @ 15 A [22 A] 12 V @ 2.6 A [8 A] -12 V @ 2 A [2.5 A] LPQ152
[3 A]*
±5-25 V @ 2.5 A
5 V @ 15 A [22 A] 15 V @ 4.8 A [6.4 A] -15 V @ 1.6 A [2 A] LPQ153
[3 A]*
5 V @ 15 A [22 A] 12 V @ 6 A [8 A] -12 V @ 2 A [2.5 A] 24 V @ 3.5 A [4.5 A] LPQ154
[165 W] 50 W NTQ160 Series
3.3 V @ 15 A [30 A] 5 V @ 10 A [20 A] 4.25” x 8.5” x 1.5”
12 V @2 A [4.5 A]* 12 V @ 2 A [4.5 A]* NTQ162
(1.8-3.5 V) (3-5.5 V) (108 x 215.9 x 38.1)
5 V @ 15 A [30 A]
3.3 V @ 10 A [20 A] 12 V @ 2 A [4.5 A]* 12 V @ 2 A [4.5]* NTQ163
(3.3-5 V)
3.3 V @ 15 A [30 A] 2.5 V @ 10 A [20 A]
5 V @ 2 A [4 A]* 12 V @ 2 A [4 A]* NTQ165
(3.3-5 V) (1.8-3.5 V)
[175 W] 110 W LP170 Series
5 V @ 22 A [35 A]* 4.25” x 8.5” x 1.5”
LPS172
(2.5-6 V) (108 x 215.9x 38.1)
12 V @ 9.1 A [15 A]*
LPS173
(6-12 V)
(1) 15 V @ 7.3 A [12 A]*
LPS174
(12-24 V)
24 V @ 4.5 A [7.5]*
LPS175
(24-54 V)
5 V @ 15 A [30 A] -12 V @ 0.2 A [3 A] ±3.3-25 V @
12 V @ 6 A [8 A] LPQ172
(3.3-5.5 V) (-12-15 V) 2 A [5 A]*
5 V @ 10 A [24 A] -12 V @ 1.2 A [3 A] 5 V @ 10 A [24 A]*
12 V @ 6 A [8 A] LPQ173
(3.3-5.5 V) (-12-15 V) (3.3-5 V)
[200 W] 100 W LPQ200-M Series
3.3 V @ 13 A [18 A] 5 V @ 13 A [18 A] 12 V @ 5 A [9 A] -12 V @ 1 A [2 A] 3” x 5” x 1.32” LPQ201-M
5 V @ 13 A [18 A] 12 V @ 5 A [9 A] 24 V @ 1.5 A [3 A] -12 V @ 1 A [2 A] (76.2 x 127 x 33.6) LPQ202-M
Options:
F Replace the ‘J’ at the end of the model number with ‘FJ’ when the optional (5) These models feature harmonic current correction to EN61000-3-2
standby output and / or remote ON/OFF control is required e.g., TLP150N-99S12FJ * Floating output
Output Power Output

[250 W] 125 W LPS200-M Series

5 V @ 20 A [40 A]* 3” x 5” x 1.32” LPS202-M
12 V @ 10.3 A [20.8 A]* (76.2 x 127 x 33.6) LPS203-M
15 V @ 8.3A [16.6 A]* LPS204-M
(1)
24 V @ 5.2 A [10.4 A]* LPS205-M
48 V @ 2.6 A [5.2 A]* LPS208-M
12 V @ 21 A* 4” x 7” x 1.5” NLP250N-99S12J
(1)
24 V @ 10.5 A* (101.6 x 177.8 x 38.1) NLP250N-99S24J
48 V @ 5.3 A* NLP250R-96S48J
NLP250 — DC (-48 Vdc Input)
4” x 7” x 1.5”
12 V @ 14.6 A [21 A] NLP250N-48S12J
(101.6 x 177.8 x 38.1)
[250 W] LP250 Series
5 V (3-6 V) @ [50 A]* 5” x 9” x 2” LPS252-C
12 V (6-12 V) @ [21 A]* (127 x 228.6 x 50.8) LPS253-C
15 V (12-24 V) @ [16.7 A]* LPS254-C
24 V (24-48 V) @ [10.4 A]* LPS255-C
(3), (4) 5 V @ [35 A] 12 V @ [10 A] -12 V @ [6 A] ±5-25 V @ [6 A]* LPQ252-C
5 V @ [35 A] 15 V @ [10 A] -15 V @ [6 A] ±5-25 V @ [6 A]* LPQ253-C
[350 W] LP350 Series
5 V (3-6 V) @ [70 A]* 5” x 9” x 2.5” LPS352-C
12 V (6-12 V) @ [29.2 A]* (127 x 228.6 x 63.5) LPS353-C
15 V (12-24 V) @ [23.3 A]* LPS354-C
24 V (24-48 V) @ [14.6 A]* LPS355-C
(3), (4) 5 V @ [50 A] 12 V @ [12 A] -12 V @ [6 A] ±3.3-24 V @ [6 A]* LPQ352-C
5 V @ [50 A] 15 V @ [12 A] -15 V @ [6 A] ±3.3-24 V @ [6 A]* LPQ353-C
[350 W] 200 W NTS350 Series
12 V @ 16.6 A [29.2 A]* 4” x 7” x 1.5” NTS353
24 V @ 8.3 A [14.6 A]* (101.6 x 177.8 x 38) NTS355
48 V @ 4.2 A [7.3 A]* NTS358
(3), (4) 54 V @ 3.7 A [6.5 A]* NTS359
[500 W] 200 W NTS500 Series
12 V @ 16.6 A [41.7 A]* 4” x 7” x 1.5” NTS503
24 V @ 8.3 A [20.8 A]* (101.6 x 177.8 x 38) NTS505
18 V @ 11.1 A [27.7A]* NTS506
(3), (4) 48 V @ 4.2 A [10.4 A]* NTS508
Options:
[ ] Rating with 30 CFM of air (4) Optional end fan cover (see datasheet for increased dimensions)
(1) Optional cover/enclosure (see datasheet for increased dimensions) * Floating output
(3) Optional fan cover (see datasheet for increased dimensions)
Low Power
External power adapters
2-100 Watts
Special Features
All models feature: AC Input:
8JEFSBOHF"$JOQVU 8BMMNPVOU 4JOHMFPVUQVU
)JHIEFNPOTUSBUFE.5#' 64¯QSPOH - 2.5 mm barrel plug
0WFSMPBEQSPUFDUJPO $IJOB¯QSPOH - 2.1 mm right angle plug
&YUFOTJWFTBGFUZBQQSPWBMT &VSPQF¯QSPOH AD7216N2L
6OJUFE,JOHEPN¯QSPOH 5SJQMFPVUQVU
Many models feature: "VTUSBMJB¯QSPOH - 5-pin DIN
&/DPNQMJBODF - Interchangeable
.FEJDBMBQQSPWBMT 'SFFTUBOEJOH
5IFSNBMQSPUFDUJPO - IEC320 2-pin (C14) & (C6)
&OFSHZ4UBS - IEC320 2-pin (C8)
Output Power V1 V2 V3 Size W x L x H (mm) Model
2W DCH2 Series
6.5 V @ 0.3 A 1.5” x 1.02” x 1.75” DCH2-050AU-0001
6.5 V @ 0.3 A (38.1 x 26 x 44.4) DCH2-050EU-0001
6.5 V @ 0.3 A DCH2-050UK-0001
6.5 V @ 0.3 A DCH2-050US-0001
3W DCH3 Series — USB

1.03” x 2.28” x 1.81” DCH3-050US-0001
5 V @ 0.55 A
(26.1 x 58 x 46) DCH3-050US-0002
1.03” x 2.28” x 1.80” DCH3-050EU-0001
5 V @ 0.55 A
(26.1 x 58 x 45.8) DCH3-050EU-0002
2.02” x 2.28” x 0.91” DCH3-050UK-0001
5 V @ 0.55 A
(51.2 x 57.8 x 23) DCH3-050UK-0002
1.07” x 2.66” x 1.81”
5 V @ 0.55 A DCH3-050US-0004
(27.2 x 67.2 x 46)
1.07” x 2.66” x 1.81”
5 V @ 0.55 A DCH3-050EU-0004
(27.2 x 67.2 x 46)
2.02” x 2.64” x 0.97”
5 V @ 0.55 A DCH3-050UK-0004
(51.2 x 67 x 24.5)
1.67” x 2.63” x 1.05”
5 V @ 0.55 A DCH3-050AU-0004
(42.4 x 66.8 x 26.7)
4W DA4 Series
1.02” x 2.36” x 1.80”
5.5 V @ 0.75 A DA4-050US
(26 x 60 x 45.8)
1.02” x 2.36” x 2.23”
5.5 V @ 0.75 A DA4-050EU
(26 x 60 x 58.3)
1.02” x 2.36” x 1.80”
5.5 V @ 0.75 A DA4-050CH
(26 x 60 x 45.8)
8W DA4 US Series
11 V @ 0.30 A 1.02” x 2.36” x 1.80” DA4-110US
16.5 V @ 0.30 A (26 x 60 x 45.8) DA4-165US
18 V @ 0.30 A DA4-180US
21.5 V @ 0.30 A DA4-215US
23 V @ 0.30 A 1.10” x 2.36” x 1.99” DA4-230US
26.5 V @ 0.30 A (28 x 60 x 50.6) DA4-265US
12 W DA12-M Series
1.10” x 2.36” x 2.14”
5V@2A DA12-050AU-M
(28 x 60 x 54.3)
12 V @ 1 A DA12-120AU-M
1.10” x 2.36” x 2.48”
5V@2A DA12-050EU-M
(28 x 60 x 63.1)
12 V @ 1 A DA12-120EU-M
1.98” x 2.36” x 1.90”
5V@2A DA12-050UK-M
(50.2 x 60 x 48.3)
12 V @ 1 A DA12-120UK-M
1.10” x 2.36” x 1.99”
5V@2A DA12-050US-M
(28 x 60 x 50.6)
12 V @ 1 A DA12-120US-M
1.10” x 2.36” x 2.14”
12 V @ 1 A DA12-120MP-M(1)
(28 x 60 x 54.3)
16 W DA16 Series
12 V @ 1.33 A 2.08” x 3.03” x 1.17” DA16-120US
12 V @ 1.33 A (53.0 x 77.0 x 29.8) DA16-120EU
12 V @ 1.33 A DA16-120UK
12 V @ 1.33 A DA16-120 AU
24 W AD24
12 V @ 2 A 1.89” x 4.13” x 1.3” AD2412N3L
(48 x 105 x 33)
40 W DP40 Series
9 V @ 4.4 A 2.4” x 4.88” x 1.55” DP4009N2M
9 V @ 4.4 A (61 x 124 x 39.5) DP4009N3M
12 V @ 3.33 A DP4012N2M
12 V @ 3.33 A DP4012N3M
15 V @ 2.67 A DP4015N2M
15 V @ 2.67 A DP4015N3M
18 V @ 2.22 A DP4018N2M
18 V @ 2.22 A DP4018N3M
24 V @ 1.67 A DP4024N2M
24 V @ 1.67 A DP4024N3M
48 V @ 0.84 A DP4048N2M
48 V @ 0.84 A DP4048N3M
50 W AD50 Series
12 V @ 4.16 A 2.56” x 4.72” x 1.61” AD5012N2L
12 V @ 4.16 A (65 x 120 x 41) AD5012N3L
50 W DPT50 Series
3.3 V @ 9 A 5V@3A -12 V @ 0.5 A 2.39” x 5.24” x 1.62” DPT51
5V@8A 12 V @ 3 A -12 V @ 0.5 A (60.7 x 133 x 41.15) DPT52
5V@8A 15 V @ 2.4 A -15 V @ 0.5 A DPT53
5V@8A 24 V @ 1.5 A 12 V @ 0.5 A DPT54
Options:
(1) Interchangeable AC plug - must be purchased separately.
60 W DPS50 Series
5V@6A 2.39” x 5.24” x 1.62” DPS52
12 V @ 5 A (60.7 x 133 x 41.15) DPS53
15 V @ 4 A DPS54
24 V @ 2.5 A DPS55
48 V @ 1.25 A DPS58
72 W AD72
2.0” x 4.54” x 1.10”
16 V @ 4.5 A AD7216N2L
(51 x 115.4 x 28)
78 W AD80
3.13” x 5.87” x 1.76”
24 V @ 3.25 A AD8024N3L-001
(79.6 x 149 x 44)
100 W AD100
2.56” x 3.03” x 1.44”
48 V @ 2.08 A AD10048P3L-001
(65 x 156 x 37.2)
Healthcare AC—DC Power Supplies

Up to 4860 Watts
&NFSTPO/FUXPSL1PXFSQSPEVDFTBXJEFSBOHFPG"$¯%$QPXFSTVQQMJFTDFSUJGJFEGPSVTFJO
medical equipment requiring lower safety ground leakage and higher isolation. The power
supplies listed below are designed for use in non-patient critical applications: bio-life science,
medical, dental, imaging and laboratory applications such as immunoassay and in-vitro
diagnostics machines, ultrasound and mass analyzers. All these power supplies are high
efficiency switch-mode designs, and feature full medical safety approval to EN60601-1.
Special Features
All models feature: Many models feature:
*OEVTUSZTUBOEBSEGPPUQSJOUT 'VMMQPXFSUP$ .FEJDBMBQQSPWBMT &/DPNQMJBODF
8JEFSBOHF"$JOQVU )JHIEFNPOTUSBUFE.5#' &YUFOTJWFTBGFUZBQQSPWBMT 4VQFSWJTPSZPVUQVUT 77
3FNPUFTFOTF 0WFSWPMUBHFQSPUFDUJPO %FSBUFEPQFSBUJPOUP$ 8JEFBEKVTUGMPBUJOHUIPVUQVU

"EKVTUBCMFPVUQVUT 0WFSMPBEQSPUFDUJPO 4JOHMFXJSFDVSSFOUTIBSF
1PXFSGBJM #VJMUJO&.*GJMUFSJOH 8JEFBEKVTUPOTJOHMFPVUQVUNPEFMT
Output Power Output

[50 W] 40 W NFS40 Series — Medical

12 V @ 4 A* 3” x 5” x 1.2” NFS40-7912J
15 V @ 3.3 A* (76.2 x 127 x 30.5) NFS40-7915J
24 V @ 2 A* NFS40-7924J
5.1 V @ 7 A 12 V @ 1 A -12 V @ 1 A NFS40-7928J
(1) 5.1 V @ 5 A 12 V @ 2 A -12 V @ 0.5 A NFS40-7908J
5.1 V @ 5 A 15 V @ 2 A -15 V @ 0.5 A NFS40-7910J
[55 W] 40 W LP40-M Series — Medical
5 V @ 8 A [11 A]* 3” x 5” x 1.2” LPS42-M
12 V @ 3.3 A [4.5]* (76.2 x 127 x 30.5) LPS43-M
(1)
15 V @ 2.6 A [3.6 A]* LPS44-M
24 V @ 1.6 A [2.3 A]* LPS45-M
5 V @ 4 A [5 A] 12 V @ 2 A [2.5 A] -12 V @ 0.5 A [0.7 A] LPT42-M
5 V @ 4 A [5 A] 15 V @ 2 A [2.5 A] -15 V @ 0.5 A [0.7 A] LPT45-M
[60 W] 45 W NPS40-M Series — Medical
5 V @ 8 A [11 A] 2” x 4” x 1” NPS42-M
12 V @ 3.75 A [5 A] (50.8 x101.6 x 25.4) NPS43-M
15 V @ 3 A [4 A] NPS44-M
(1) 24 V @ 1.9 A [2.5 A] NPS45-M
48 V @ 0.94 A [1.25 A] NPS48-M
3.3 V @ 8 A 5V@3A 12 V @ 0.5 A 2” x 4” x 1.3” LPT51-M
5V@8A 12 V @ 3 A -12 V @ 0.5 A (50.8 x 101.6 x 33) LPT52-M
(1) 5V@8A 15 V @ 2.4 A -15 V @ 0.5 A LPT53-M
5V@8A 24 V @ 1.5 A 12 V @ 0.5 A LPT54-M
[60 W] 60 W 5 V @ 11 A* LPS52-M
12 V @ 5 A* LPS53-M
15 V @ 4 A* LPS54-M
24 V @ 2.5 A* LPS55-M
(1) 48 V @ 1.25 A* LPS58-M
Options:
* Floating output
Output Power Output

[75 W] 65 W NLP65 Series — Medical

12 V @ 6.5 A* 3” x 5” x 1.26” NLP65-9912J(5)
15 V @ 5.3 A* (76.2 x 27 x 32) NLP65-9915J(5)
24 V @ 3.5 A* NLP65-9924J(5)
5V@8A 12 V @ 3 A NLP65-9929J(5)
5V@8A 24 V @ 2 A NLP65-9920J(5)
5V@8A 12 V @ 3 A -12 V @ 1 A NLP65-9908J(5)
[80W] 60 W LP60-M Series — Medical
12 V @ 5 A [6.7 A]* 3” x 5” x 1.65” LPS63-M
(1) 15 V @ 4 A [5.3 A]* (76.2 x 127 x 41.9) LPS64-M
24 V @ 2.5 A [3.3 A]* LPS65-M
5 V @ 7 A [8 A] 12 V @ 3 A [3.5 A] -12 V @ 0.7 A [1 A] LPT62-M
5 V @ 7 A [8 A] 15 V @ 2.8 A [3.3 A] -15 V @ 0.7 A [1 A] LPT63-M
5 V @ 22 A* 3” x 6.5” x 1.26” NLP110-9905J(5)
12 V @ 9.2 A* (76.2 x 165.1 x 45.72) NLP110-9912J(5)
24 V @ 4.6 A* NLP110-9924J(5)
48 V @ 2.3 A* NLP110-9917J(5)
3.3 V @ 20 A 2.5 V @ 20 A 12 V @ 1 A NLP110-9994J(5)
5 V @ 18 A 3.3 V @ 20 A 12 V @ 1 A NLP110-9993J(5)
12 V @ 8.5 A 3.3 V @ 20 A -12 V @ 1 A NLP110-9995J(5)
12 V @ 8.5 A 5 V @ 18 A -12 V @ 1 A NLP110-9908J(5)
[110 W] 80 W NFS110 Series — Medical
12 V @ 9 A* 4.25” x 7” x 1.8” NFS110-7912J
15 V @ 7.3 A* (107.95 x 177.8 x 32) NFS110-7915J
24 V @ 4.5 A* NFS110-7924J
(1)
5.1 V @ 10 A 24 V @ 5 A -12 V @ 1 A -5 V @ 1 A NFS110-7901PJ
5 V @ 10 A 24 V @ 4 A 12 V @ 5 A -12 V @ 1 A NFS110-7902PJ
[130 W] 80 W LPT100-M Series — Medical
3.3 V @ 13 A [18 A] 5 V @ 5 A [9 A] 12 V @ 1 A [2.3 A] 2” x 4” x 1.28” LPT101-M
5 V @ 13 A [18 A] 12 V @ 5 A [9 A] -12 V @ 1 A [2 A] (50.8 x 101.6 x 32.7) LPT102-M
(1) 5 V @ 13 A [18 A] 15 V @ 4 A [7.2 A] -15 V @ 1 A [1.5 A] LPT103-M

5 V @ 13 A [18 A] 24 V @ 1.5A [3 A] 12 V @ 1 A [2.3 A] LPT104-M
[150 W] 100 W LPS100-M Series — Medical
5 V @ 16 A [24 A]* 2” x 4” x 1.29” LPS102-M
12 V @ 8.3 A [12.5 A]* (50.8 x 101.6 x 33) LPS103-M
15 V @ 6.7 A [10 A]* LPS104-M
(1) 24 V @ 4.2 A [6.3 A]* LPS105-M
48 V @ 2.1 A [3.1 A]* LPS108-M
[150 W] 100 W TLP150 Series — Medical
12 V @ 12.5 A* 3” x 5” x 1.25” TLP150N-99S12J(5) F
24 V @ 6.3 A* (177.8 x 101.6 x 31.75) TLP150N-99S24J(5) F
(1)
Options:
F Replace the ‘J’ at the end of the model number with ‘FJ’ when the optional standby (1) Optional cover/enclosure (see datasheet for increased dimensions)
output and/or remote ON/OFF control is required e.g., TLP150N-99S12FJ (5) These models feature harmonic current correction to EN61000-3-2
[ ] Rating with 30 CFM of air * Floating output
Output Power Output


5 V @ 22 A [35 A]* 4.25” x 8.5” x 1.5”
LPS172-M
(2.5-6 V) (108 x 215.9 x 38.1)
12 V @ 9.1 A [15 A]*
LPS173-M
(6-12 V)
15 V @ 7.3 A [12 A]*
LPS174-M
(12-24 V)
24 V @ 4.5 A [7.5]*
LPS175-M
(24-54 V)
[200 W] 100 W LPQ200-M Series — Medical
3.3 V @ 13 A [18 A] 5 V @ 13 A [18 A] 12 V @ 5 A [9 A] -12 V @ 1 A [2 A] 3” x 5” x 1.32” LPQ201-M
5 V @ 13 A [18 A] 12 V @ 5 A [9 A] 24 V @ 1.5 A [3 A] -12 V @ 1 A [2 A] (76.2 x 127 x 33.6) LPQ202-M
(1)
[250 W] 125 W LPS200-M Series — Medical

5 V @ 20 A [40 A]* 3” x 5” x 1.32” LPS202-M
12 V @ 10.3 A [20.8 A]* (76.2 x 127 x 33.6) LPS203-M
(1) 15 V @ 8.3A [16.6 A]* LPS204-M

24 V @ 5.2 A [10.4 A]* LPS205-M
48 V @ 2.6 A [5.2 A]* LPS208-M
12 V @ 21 A* 4 x 7 x 1.5 NLP250N-99S12J
24 V @ 10.5 A* (101.6 x 177.8 x 38.1) NLP250N-99S24J
(1)
[500 W] 200 W NTS500-M Series — Medical

12 V @ 16.6 A [41.7 A]* 4” x 7” x 1.5” NTS503-M
24 V @ 8.3 A [20.8 A]* (101.6 x 177.8 x 38) NTS505-M
48 V @ 4.2 A [10.4 A]* NTS508-M
(4), (5)
Output
Output Power Size H x W x L (mm) Model
Up to 1500 W iMP Medium Power Series

2-60 V 1-21 outputs Fully configurable and intelligent 2.5” x 5” x 10” iMP4, iMP8
(63.5 x 127 x 254) See iMP section
1500-4920 W iVS High Power Series

5” x 5” x 11”
2-60 V 1-21 outputs Fully configurable and intelligent iVS1, iVS6
(63.5 x 127 x 279.4)
5” x 8” x 11” iVS3, iVS8
(63.5 x 203.2 x 279.4) See iVS section
Options:
(1) Optional enclosure (5) Optional end fan cover (see datasheet for increased dimensions)
(4) Optional fan covers (see datasheet for increased dimensions)
* Floating output

12 W DA12-M Series — Medical
1.10” x 2.36” x 2.14”
5V@2A DA12-050AU-M
(28 x 60 x 54.3)
12 V @ 1 A DA12-120AU-M
1.10” x 2.36” x 2.48”
5V@2A DA12-050EU-M
(28 x 60 x 63.1)
12 V @ 1 A DA12-120EU-M
1.98” x 2.36” x 1.90”
5V@2A DA12-050UK-M
(50.2 x 60 x 48.3)
12 V @ 1 A DA12-120UK-M
1.10” x 2.36” x 1.99”
5V@2A DA12-050US-M
(28 x 60 x 50.6)
12 V @ 1 A DA12-120US-M
1.10” x 2.36” x 2.14”
12 V @ 1 A DA12-120MP-M(1)
(28 x 60 x 54.3)
24 W DP40 Series — Medical
9 V @ 4.4 A 2.4” x 4.88” x 1.55” DP4009N2M
9 V @ 4.4 A (61 x 124 x 39.5) DP4009N3M
12 V @ 3.33 A DP4012N2M
12 V @ 3.33 A DP4012N3M
15 V @ 2.67 A DP4015N2M
15 V @ 2.67 A DP4015N3M
18 V @ 2.22 A DP4018N2M
18 V @ 2.22 A DP4018N3M
24 V @ 1.67 A DP4024N2M
24 V @ 1.67 A DP4024N3M
48 V @ 0.84 A DP4048N2M
48 V @ 0.84 A DP4048N3M
50 W AD50-M Series — Medical
12 V @ 4.16 A 2.56” x 4.72” x 1.61” AD5012N2LM
12 V @ 4.16 A (65 x 120 x 41) AD5012N3LM
50 W DPT50-M Series — Medical

3.3 V @ 9 A 5V@3A -12 V @ 0.5 A 2.39” x 5.24” x 1.62” DPT51-M
5V@8A 12 V @ 3 A -12 V @ 0.5 A (60.7 x 133 x 41.15) DPT52-M
5V@8A 15 V @ 2.4 A -15 V @ 0.5 A DPT53-M
5V@8A 24 V @ 1.5 A 12 V @ 0.5 A DPT54-M
60 W DPS50-M Series — Medical

5V@6A 2.39” x 5.24” x 1.62” DPS52-M
12 V @ 5 A (60.7 x 133 x 41.15) DPS53-M
15 V @ 4 A DPS54-M
24 V @ 2.5 A DPS55-M
48 V @ 1.25 A DPS58-M
Options:
(1) Interchangeable AC plug - must be purchased separately.
Medium Power
MP Series
Modular power supply for
optimum flexibility
MP4
Up to 1200 Watts MP1
Total Power: Up to 1200 W

Input Voltage: 85-264 Vac
120-350 Vdc MP8
# of Outputs: Up to 21
MP6
Special Features
-PXDPTU
$VSSFOUTIBSFPOBMMPVUQVUTXJUISBUJOHTPG
10 A or greater
3FNPUFTFOTFPOBMMPVUQVUTXJUISBUJOHT
greater than 2 A
0WFSMPBEQSPUFDUJPOPOBMMPVUQVUT
7PMUBHFBEKVTUNFOUPOBMMPVUQVUT
.BSHJOJOHPOBMMTJOHMFPVUQVUNPEVMFT
*OQVU0,TJHOBMBOETUBUVTJOEJDBUPS-&%
(MPCBM%$0,TJHOBMBOETUBUVTJOEJDBUPS-&%
(MPCBMBOEJOEJWJEVBMNPEVMFJOIJCJUTFOBCMF
'PSDFEBJSDPPMJOHPSDVTUPNFSQSPWJEFE
air option
*TPMBUFE"7CJBTWPMUBHF Electrical Specifications
1PXFSGBDUPSDPSSFDUJPO
&/IBSNPOJDEJTUPSUJPO
Input
compliance Input voltage 85-264 Vac
120-350 Vdc
$*413 &/$VSWF#DPOEVDUFE
radiated EMI Frequency 47-440 Hz
&VSPQFBO$&.BSLSFRVJSFNFOUT Inrush current 40 A peak maximum (soft start)
0QUJPOBM7.&UJNJOHBOETZTUFN%$ Efficiency 70-80% typ. @ full case load
OK module Power factor 0.99 typ. meets EN61000-3-2 (N/A @ 440 Hz)
-PXMFBLBHFPQUJPO Turn-on time AC on 1.5 second typical
&/JNNVOJUZTUBOEBSET Inhibit/enable 150 ms typical
4UBOEBSENPEJGJDBUJPOGMFYJCJMJUZ TFF EMI filter standard CISPR 22
datasheet on Emerson.com/EmbeddedPower) EN55022 Level “B”
EMI filter CISPR 22
New Options Now Available (low leakage option) EN55022 Level “A”
0QUJPOBMCBUUFSZDIBSHFSNPEVMF
Leakage current standard 2.0 mA maximum @ 240 Vac
0QUJPOBM"7CJBTWPMUBHF
Leakage current 300 µA maximum @ 240 Vac
0QUJPOBMFYUFOEFEIPMEVQNPEVMF (low leakage option)
0QUJPOBMIJHIWPMUBHFNPEVMF OPOJTPMBUFE
Radiated EMI CISPR 22

0QUJPOBM03´JOHEJPEFNPEVMF EN55022 Level “B”
Holdover storage 20 ms minimum (independent of input Vac)
AC OK >5 ms early warning minimum before outputs lose regulation
Full cycle ride thru (50 Hz)
Harmonic distortion Meets EN61000-3-2
Isolation Meets EN60950
(MPCBMJOIJCJUFOBCMF TTL, Logic “1” and Logic “0”; configurable
Input fuse (internal) MP4: 10 A; MP6: 15 A; MP8: 20 A; MP1: 20 A
Warranty Two years
Medium Power
Output Environmental Specifications

Adjustment range ±10% minimum all outputs
Operating $UP$ TUBSU!$

Margining ±4-6% nominal 1 temperature (derate each output linearly to 50%
BU$
$UP$NBYXJUI
Overall regulation 0.4% or 20 mV maximum rear air option)
(36 W modules 4% maximum)
Storage/ MIL-HDBK 810E
Ripple RMS: 0.1% or 10 mV, whichever is greater; Pk-Pk: 1.0% or vibration
50 mV, whichever is greater; bandwidth limited to 20 MHz Humidity 95% non-condensing
Dynamic response <2% or 100 mV, with 25% load step
Storage $UP$
Recovery time To within 1% in <300 µ second temperature
Overcurrent protection Single, main of dual output module 105-120% of rated Temperature QFS$
output current coefficient
Cooling: Internal DC fan or customer provided
Short-circuit protection Protected for continuous short-circuit
air (option)
Recovery is automatic upon removal of short
Overvoltage protection Single output modules
(measured at sense
connection) Safety
Reverse voltage protection 100% of rated output current UL UL1950
Thermal protection All outputs disabled when internal temp exceeds safe operating CSA CSA22.2 No. 234 Level 5
range. > 5 ms warning (AC OK signal) before shutdown
IEC IEC950, Class 1
Remote sense Up to 0.5 V total drop (not available on triple output module)
VDE EN60950-1
Single wire parallel Current share to within 2% of total rated current 2
BABT Compliance to EN 60950, BS 7002
DC OK -2% to -8% of nominal for any monitored output 2
CB Certificate and report
Minimum load Not required on single or triple output modules.
10% required on main of dual output modules 3 CE Mark
Housekeeping standby 5 Vdc @1.0 A mA maximum present whenever AC input is

applied (optional 2.0 A available)
Module inhibit TTL, isolated, singles and dual (both outputs) only
Switching frequency 250 kHz
Notes:
Output/output isolation >1 Megohm
1. Single output modules only
VME signal option board POR signal & quad external DC OK 2. Single and main of dual output modules only
3. Contact factory for optional preload if required
Ordering Information
Sample below is 1200 W case with 12 V @ 50 A; 5 V @ 60 A; 24 V @ 8.5 A; 12 V @ 10 A; 12 V @ 4 A; extended hold-up with no options.
Case Size Module/Voltage(s) Add-on Modules Case Option Codes Hardware Code
First - Module Code Requires 1 slot each
Second - Voltage Code
MP1 - 3L - 2E - 1Q - 4LL - HUP - 00 - ###

Case Size (mm) Module Codes Add-on Modules Case Option Codes Factory assigned
4 = 2.5” x 5” x 10”; Module/Voltage/Option Codes HUP = Hold up module for modifications
400-600 W, 5 Slots Module Codes: VME = VME POR signal First Digit
(63.5 x 127 x 254) (None) = 36 W Triple O/P (1 slot) and isolated DC 0 - 9 = parallel code
6 = 2.5” x 5” x 11”; 1 = 210 W Single O/P (1 slot) (See MP parallel codes table on
600 -800 W, 5 Slots 2 = 360 W Single O/P (2 slot) following page)
(63.5 x 127 x 279.4) 3 = 750 W Single O/P (3 slot)
8 = 2.5” x 7” x 10”; 4 = 144 W Dual O/P (1 slot) Second Digit
800-1000 W, 6 Slots 5 - 9 = Future Standard Options
(63.5 x 177.8 x 254) 0 = no options
1 = 2.5” x 8” x 11”; Voltage Codes: 1 = rear air exhaust
1000-1200 W, 7 Slots See Output Module Voltage/ 3 = global enable
(63.5 x 203.2 x 279.4) Current table 5 = option package
(options 1 & 3)
M = low leakage
N = low leakage plus option 1
P = low leakage plus option 3
R = low leakage plus option 5
Medium Power
Case Specifications MP8 and MP1

MP4 and MP6 (AC input on opposite side)
S S S S S S S
S S S S S L L L L L L L
AC
L L L L L O O O O O O O
input
O O O O O
T T T T T T T
T T T T T
7 6 5 4 3 2 1
5 4 3 2 1
MP1 only
-A-
Input Input
85-264 Vac 180-264 Vac 85-264 Vac 180-264 Vac
MP4 = 2.5” x 5” x 10” (63.5 x 127 x 254 mm) 400 W max. 600 W max. MP8 = 2.5” x 7” x 10” (63.5 x 177.8 x 254 mm) 800 W max. 1000 W max.
5 available slots 6 available slots
MP6 = 2.5” x 5” x 11” (63.5 x 127 x 279.4 mm) 600 W max. 800 W max. MP1 = 2.5” x 8” x 11” (63.5 x 203.2 x 279.4 mm) 1000 W max. 1200 W max.
5 available slots 7 available slots
MP Module Specifications
Output
Single Single Single Dual Triple
Module code 1 2 3 4
Max output power 210 W 360 W 600 W 144 W 36 W
Max output current 35 A 60 A 120 A 10 A 2A
Output voltages available 2-60 V 2-60 V 2-60 V 2-28 V 2-28 V
Standard voltage increments 25 25 25 19 18
Remote sense on outputs Yes Yes Yes Yes, both No
Remote margin/V-Program Yes Yes Yes No No
Module inhibit (isolated) Yes Yes Yes No No
Single wire active current share Yes Yes Yes Yes, main only No
Overvoltage/overcurrent protection Yes Yes Yes Yes OCP only
Minimum load required No No No 10% main only No
Slots occupied in any MP case 1 2 3 1 1
Voltage
Voltage Single Output Module Code Dual Output** Triple Output
Code
Designers’ tip: 1 2 3 V1 V2 V1 V2 V3
For assistance in configuring your specific 2V A 35 A 60 A 120 A – 10 A – – 2A
requirement, contact Technical Support. 2.2 V B 35 A 60 A 120 A – 10 A – – 2A
+1 888 412 7832 (North America) 3V C 35 A 60 A 120 A – 10 A – – 2A
or +1 407 241 2752 3.3 V D 35 A 60 A 120 A – 10 A – – 2A
0 800 0321546 (in the UK) 5V E 35 A 60 A 120 A 10 A 10 A – – 2A
+44 800 0321546 (outside the UK) 5.2 V F 35 A 60 A 115 A – 10 A – – 2A
Email: 5.5 V ( 34 A 58 A 109 A – 10 A – – 2A
techsupport.embeddedpower@emerson.com 6V H 23 A 42 A 78 A – 10 A – – 2A
8V I 20 A 36 A 68 A – – 1A 1A 1A
Parallel Codes 10 V J 18 A 32 A 60 A – – 1A 1A 1A
11 V K 17 A 31 A 54.5 A – – 1A 1A 1A
MP4 and MP6 12 V L 17 A 30 A 50 A 10 A 4A 1A 1A 1A
Slot 4
Slot 3 Slot 3
Slot 5
Slot 2
Slot 1
available slots 14 V M 14 A 21 A 40.5 A 9A 4A 1A 1A 1A

MP8 15 V N 14 A 20 A 39 A 8A 4A 1A 1A 1A
Slot 6
Slot 4
Slot 2
Slot 5 Slot 5
Slot 1 Slot 1
available slots 18 V O 11 A 19 A 33.3 A – – – 0.5 A 0.5 A

MP1 20 V P 10.5 A 18 A 30 A – – – 0.5 A 0.5 A
Slot 3
Slot 7
Slot 6
Slot 4
Slot 2
available slots 24 V Q 8.5 A 15 A 23.5 A 4A 2A – 0.5 A 0.5 A

7 6 5 4 3 2 1 28 V R 6.7 A 12.8 A 21.4 A 3A 2A – 0.5 A 0.5 A
0 = no parallel 30 V S 6.5 A 12 A 20 A – – –
1=1&2 33 V T 6.2 A 10.9 A 18.2 A – – – – –
2=2&3 36 V U 5.8 A 10 A 16.6 A – – – – –
3=3&4 42 V V 4.2 A 7.5 A 12.5 A – – – – –
4=4&5
48 V W 4A 7.5 A 12.5 A – – – – –
54 V X 3.7 A 6A 11 A – – – – –
5=3&4&5
60 V Y 3.5 A 6A 10 A – – – – –
6=5&6
Non-std* Z Special Voltage - Consult factory for specifications
7=4&5&6
8=6&7 * Note: Increments of current not shown can be achieved by paralleling modules (add currents of each module selected)
**Total loading of outputs on the dual module not to exceed 144 W.
9 = 3 & 4, 6 & 7
Intelligent Medium Power
Intelligent MP Series TM
Intelligent modular power supply

for optimum flexibility
Font: Minion Bold for MP Color: "i" 100% Blue, 50% Magenta,
0% Yellow, 0% Black
Up to 1500 Watts
Minion italic for i ; size for each is the same
Created on Mac "MP" - 100% Black
Total Power: Up to 1500 Watts

Input Voltage: 85-264 Vac
120-300 Vdc
Special Features
Full Medical EN60601 approval *OUFMMJHFOUGBO TQFFEDPOUSPMGBVMUTUBUVT
*ODSFBTFEQPXFSEFOTJUZUPPWFS
*OUFMMJHFOU*2C control %PXOMPBEBCMF(6*GSPNXFCTJUF standard MP
7PMUBHFBEKVTUNFOUPOBMMPVUQVUT $VTUPNFSQSPWJEFEBJSPQUJPO #BDLXBSEDPNQBUJCJMJUZXJUITUBOEBSE.1
(Manual or I2C) 1DPOUSPMMFE1'$JOQVUXJUIBDUJWFJOSVTI &YUFSOBMTXJUDIJOHGSFRVFODZTZODJOQVU
$POGJHVSBCMFJOQVUBOEPVUQVU protection 0QUJPOBMDPOGPSNBMDPBUJOH
(case and module) OK signals and *2C monitor of voltage, current, and temp *OEVTUSJBMUFNQSBOHF °C to 70 °C)
indicators
1SPHSBNNBCMFWPMUBHF DVSSFOUMJNJU /PQSFMPBESFRVJSFE
$POGJHVSBCMFJOIJCJUFOBCMF
inhibit/enable through I2C *OEVTUSJBMTIPDLWJCSBUJPO (T
$POGJHVSBCMFPVUQVU
0QUJPOBMFYUFOEFEIPMEVQNPEVMF
UP/DOWN sequencing
(SEMI F47 compliance)
$POGJHVSBCMFDVSSFOUMJNJU
$"/#64BOE34JOUFSGBDFPQUJPO
(foldback or constant current)
)JHIQPXFSEFOTJUZ 8DVJO
Electrical Specifications
Input
Input range 85-264 Vac 120-350 Vdc
(limited to 300 Vdc in medical applications)
Frequency 47-440 Hz
Inrush current 40 A peak max. (soft start)
Efficiency Up to 85% @ full case load
Power factor 0.99 typ. meets EN61000-3-2 (n/a @ 440 Hz)
Turn-on time AC on 1.5 sec typ., inhibit/enable 150 ms typical
programmable delay
EMI filter CISPR 22/EN55022 Level “B”
Leakage current 300 µA max. @ 240 Vac; 47-63 Hz
Radiated EMI CISPR 22/EN55022 Level “B”
Holdover storage 20 ms minimum (independent of input Vac) additional
34 ms holdover storage with optional HUP module
(SEMI F47 compatible)
AC OK >5 ms early warning min. before outputs lose regulation
Full cycle ride thru (50 Hz) (N/A on iMP4 >750 W @ 90 Vac)
The iMP software is designed to make the iMP Power
Supply Unit (PSU) accessible to the user. It is intended to
provide information gathered from the PSU and interactive
Isolation Meets EN60950 and EN60601
controls to the basic capabilities of iMP power supply.
To download go to: Emerson.com/iMP (MPCBM*OIJCJU&OBCMF TTL, Logic “1” and Logic “0”; configurable
Input fuse (internal) iMP4: 16 A; iMP8: 20 A; iMP1: 25 A (both lines fused)
Warranty Two years

Adjustment range* ±10% minimum all outputs (manual) Operating UP$BNCJFOU
(full module adjustment range using I2C) temperature Derate each output 2.5% per
Margining ±4-6% nominal analog (single output module only) EFHSFFGSPNUP$
$TUBSUVQ
Overall regulation 0.4% or 20 mV max. (36 W modules 4% maximum

Storage $UP$
Ripple RMS: 0.1% or 10 mV, whichever is greater
temperature
Pk-Pk: 1.0% or 50 mV, whichever is greater
Bandwidth limited to 20 MHz Electromagnetic Designed to meet EN61000-4;
Dynamic response <2% or 100 mV, with 25% load step susceptibility -2, -3, -4, -5, -6, -8, -11 Level 3
Recovery time To within 1% in <300 µsec Humidity Operating; non-condensing

10% to 95% RH
Overcurrent protection** Configurable through I C (calibration required). Single output
2
module and main output of the dual output module 105-120% of Vibration IEC68-2-6 to the levels of
rated output current. Aux output of dual output module 105-140% IEC721-3-2
of rated output current
MTBF >550,000 hours at full load,
Short-circuit protection Protected for continuous short-circuit demonstrated 7BDBOE$BNCJFOU
Recovery is automatic upon removal of short conditions
Overvoltage protection* Configurable through I2C

- Single output module 2-5.5 V 122-134%; 6-60 V 110-120%
- Dual output module
- Triple output module
2-6 V 122-134%; 8-28 V 110-120%
No overvoltage protection provided
Safety
UL UL60950/UL2601 (through CSA)
Reverse voltage protection 100% of rated output current
CSA CSA22.2 No. 234 Level 5
Thermal protection* Configurable through I2C
(OTP and OTW) All outputs disabled when internal temp exceeds safe operating VDE EN60950-1
Compliance to EN60950/
BABT
Remote sense Up to 0.5 V total drop (not available on triple output module) EN60601 BS7002
Single wire parallel Configurable through firmware CB Certificate and report
Current share to within 2% of total rated current
CE Mark to LVD
DC OK* ±5% of nominal. Configurable through I2C
Minimum load Not required
Housekeeping standby 5 Vdc @ 1.0 A max. present whenever AC input is applied
(Optional 2.0 A available)
Module inhibit* Configured and controlled through I2C
Switching frequency 250 kHz accepts external sync signal
Output/Output isolation >1 Megohm, 500 V
* Can be controlled via I2C
** Controlled via I2C but requires load calibration
Output Module Line-up

Module Code 1 2 3 4 5
Module Type Single Single Single Dual Triple
Max output power 210 W 360 W 750 W 144 W 36 W
Max output current 35 A 60 A 150 A 10 A 2A
6-15, 24-28; 6-15, 6-15; 6-15, 8-15, 8-15, 2-6; 8-15, 8-15,
Output voltages available* 2-60 V 2-60 V 2-60 V 2-6; 2-6, 2-6; 24-28, 8-15; 8-15, 8-15,
24-28; 24-28; 2-6 18-28; 8-15, 18-28, 2-6
Standard voltage increments 25 25 25 16 18
Remote sense Yes Yes Yes Yes Yes No
Remote margin Yes Yes Yes No No No
V-Program - I2C control Yes Yes Yes Yes Yes No
Active current share Yes Yes Yes Yes No No
Module Inhibit - I2C control Yes Yes Yes Yes Yes Yes
Module Inhibit - analog Yes Yes Yes Yes No No
Overvoltage/overcurrent protection Yes Yes Yes Yes Yes Yes
Minimum load required No No No No No No
Slots occupied in any iMP case 1 2 3 1 1
Output Module Voltage/Current

Voltage I2C
Voltage Single Output Module Code Dual Output** Triple Output
Code Adjustment
1 2 3 V1 V2 ¯ ¯ ¯ Ranges
2V A 35 A 60 A 150 A 10 A 10 A – – 2A
2.2 V B 35 A 60 A 150 A 10 A 10 A – – 2A
3V C 35 A 60 A 150 A 10 A 10 A – – 2A
3.3 V D 35 A 60 A 150 A 10 A 10 A – – 2A 1.8-6.6
5V E 35 A 60 A 150 A 10 A 10 A – – 2A
5.2 V F 35 A 60 A 144 A 10 A 10 A – – 2A Parallel Codes
5.5 V ( 34 A 58 A 136 A 10 A 10 A – – 2A
6V H 23 A 42 A 97.5 A 10 A*** 10 A*** – – 2A iMP4
Slot 4
Slot 3 Slot 3
Slot 5
Slot 2
Slot 1
8V I 20 A 36 A 84.4 A 10 A 4A 1A 1A 1A available slots
10 V J 18 A 32 A 75 A 10 A 4A 1A 1A 1A iMP8
Slot 6
Slot 4
Slot 2
Slot 5 Slot 5
Slot 1 Slot 1
11 V K 17 A 31 A 68 A 10 A 4A 1A 1A 1A 7.2-16.5 available slots
12 V L 17 A 30 A 62.5 A 10 A 4A 1A 1A 1A iMP1
Slot 3
Slot 7
Slot 6
Slot 4
Slot 2
14 V M 14 A 21 A 53.5 A 9A 4A 1A 1A 1A available slots
15 V N 14 A 20 A 50 A 8A 4A 1A 1A 1A 7 6 5 4 3 2 1
18 V O 11 A 19 A 41.6 A – – – 0.5 A 0.5 A 16.2-22.0 0 = no parallel
20 V P 10.5 A 18 A 37.5 A – – – 0.5 A 0.5 A 1=1&2
24 V Q 8.5 A 15 A 30 A 4A 2A – 0.5 A 0.5 A 2=2&3
28 V R 6.7 A 11 A 26.8 A 3A 2A – 0.5 A 0.5 A 21.6-33.0
3=3&4
30 V S 6.5 A 11 A 25 A – – – – –
4=4&5
33 V T 6.2 A 10.9 A 22.7 A – – – – –
5=3&4&5
36 V U 5.8 A 10 A 20.8 A – – – – –
6=5&6
42 V V 4.2 A 7.5 A 16 A – – – – – 29.7-66.0 7=4&5&6
48 V W 4A 7.5 A 15.6 A – – – – –
8=6&7
54 V X 3.7 A 6A 13.9 A – – – – –
60 V Y 3.5 A 6A 12.5 A – – – – – 9 = 3 & 4, 6 & 7
Non-std* Z Special Voltage - Consult factory for specifications
* Note: Increments of current not shown can be achieved by paralleling modules

(add currents of each module selected).
**Total loading of outputs on dual module not to exceed 144 W.
*** Consult factory
Sample below is 1500 W case with 12 V @ 62.5 A; 5 V @ 60 A; 24 V @ 8.5 A; 12 V @ 10 A; 12 V @ 4 A; with no options.
Module/Voltage/Option Codes
First - Module Code
Case Size Second - Voltage Code Case Option Codes Software Code Hardware Code
Third - Option Code
iMP1* - 3L0 - 2E2 - 1Q1 - 4LL0 - 00 - A - ###

Case Size (mm) Module Codes Case Option Codes Software code Factory assembled
4 = 2.5” x 5” x 10”; 750-1100 W, 5 slots Module/voltage/option codes used for configu- for hardware of
(63.5 x 127 x 254) Module codes: First digit ration change. firmware mods.
8 = 2.5” x 7” x 10”; 1000-1200 W, 6 slots (None) = 36 W triple O/P (1 slot) 0 - 9 = parallel code “A” is standard
(63.5 x 177.8 x 254) 1 = 210 W single O/P (1 slot) (See Parallel Codes table above)
1 = 2.5” x 8” x 11”; 1200-1500 W, 7 slots 2 = 360 W single O/P (2 slot)
(63.5 x 203.2 x 279.4) 3 = 750 W single O/P (3 slot) Second digit
4 = 144 W dual O/P (1 slot) 0 = No options
*Note: Add “E” after iMP4 to denote IEC 5 - 9 = future 1 = Reverse air
input option. e.g., iMP4E (MPCBMFOBCMF
(Not available on iMP8 or iMP1) Voltage Codes: 4 = Fan off w/inhibit
See Output Module Voltage/ 5 = Opt 1 + Opt 3
Current table above 6 = Opt 1 + Opt 4
7 = Opt 3 + Opt 4
Option Codes: 8 = Opt 1 +3 +4
0 = Standard 9 = CAN BUS/RS-485 73-544-002
1 = Module enable B = USB 73-546-002
2 = Constant current
3 = 1 & 2 combined
4 = Set for use in standard
Ordering Note:
(non-intelligent case)
5 - 4 = Future 1. The cases and modules of both MP and iMP series can be
interchanged to allow more flexibility. If intelligent modules
are used with non-intelligent cases, a numeric code “4” is
placed at the end of the module code (ex. 4LL0 becomes 4LL4).
2. USB to I2C module order code 73-769-001
Case Specifications
iMP4 (AC input on opposite side)
S S S S S
L L L L L
O O O O O
T T T T T
5 4 3 2 1
Input
210 W -A-
90-264 Vac 180-264 Vac
iMP4 = 2.5” x 5” x 10” (63.5 x 127 x 254 mm) 750 W max. 1100 W max.
5 available slots
iMP8 and iMP1

S S S S S S S
L L L L L L L
AC input O O O O O O O
T T T T T T T
360 W 7 6 5 4 3 2 1
iMP1 only
Input
85-264 Vac 180-264 Vac
iMP8 = 2.5” x 7” x 10” (63.5 x 177.8 x 254 mm) 1000 W max. 1200 W max.
6 available slots
iMP1 = 2.5” x 8” x 11” (63.5 x 203.2 x 279.4 mm) 1200 W max. 1200 W max.
7 available slots
Pin
1
Connectors N
750 W 2 1. AC Input
Figure ~ AC Input
Pin No. Function
Single 3
1 N
1 AC neutral
2 ~ 2 AC line (hot)
3
Figure 1. AC Input
3 Chassis (earth) ground
Figure 1. AC Input
PFC Input Connector (control and signals)
Figure 2. Connector Pin No. Function
1 Input AC OK - “emitter”
1
1 5
5 2 Input AC OK - “collector”
6 6 10 10
3 (MPCBM%$0,±FNJUUFS²
4 (MPCBM%$0,±DPMMFDUPS²
Figure 2. Connector J1
Figure
Mates2.with
Connector J1 5 External Sync
144 W
Molex 90142-0010 6 (MPCBMJOIJCJUPQUJPOBMFOBCMFMPHJD±²
Dual 7 (MPCBMJOIJCJUPQUJPOBMFOBCMFMPHJD±²
8 (MPCBMJOIJCJUPQUJPOBMFOBCMFSFUVSO
9 +5 Vsb housekeeping
10 +5 Vsb housekeeping return
I2C Bus Output Connector

Figure 3. Connector J2 Pin No. Function
1 No connection
1 5
2 No connection
6 10
3 No connection
Mates with
Figure 3. Connector J2
4 Serial clock signal (SCL)
Landwin 2050S1000 Housing 5 Serial data signal (SDA)
2053T011P Pin 6 Address bit 0 (AO)
36 W Connector 7 Address bit 1 (A1)
Kit order # 73-841-023
8 Address bit 2 (A2)
Triple 9 4FDPOEBSZSFUVSO (/%
10 5 Vcc external bus (5 Vcc Bus)
Intelligent High Power
Intelligent VS Series
Intelligent modular power supply
for optimum flexibility
Up to 4920 Watts TM
Total Power: Up to 4920 Watts

Input Voltage: 85-264 Vdc
120-300 Vdc
Font: Minion Bold for VS
Minion italic for i ; size for each is the same
Created on Mac
Color: "i" 100% Blue, 50% Magenta,
0% Yellow, 0% Black
"VS" - 100% Black
iVS1-3E0-210-2Q0-1WD-00-A
Special Features
'VMMNFEJDBM&/BQQSPWBM )JHIQPXFSEFOTJUZ 8DVJO
0QUJPOBMFYUFOEFEIPMEVQNPEVMF
*OUFMMJHFOU*2C control *OUFMMJHFOUGBO TQFFEDPOUSPMGBVMU (SEMI F47 compliance)
7PMUBHFBEKVTUNFOUPOBMMPVUQVUT status) *ODSFBTFEQPXFSEFOTJUZUP
(manual or I2C) 1DPOUSPMMFE1'$JOQVUXJUIBDUJWF*OSVTI 0QUJPOBMDPOGPSNBMDPBUJOH
$POGJHVSBCMFJOQVUBOEPVUQVU0,TJHOBMT protection *OEVTUSJBMUFNQSBOHF $UP$
and indicators *2C monitor of voltage, current, and temp 6TFTTUBOEBSEJ.1NPEVMFT

$POGJHVSBCMFJOIJCJUFOBCMF 1SPHSBNNBCMFWPMUBHF DVSSFOUMJNJU 'JFMEVQHSBEFBCMFGJSNXBSF
$POGJHVSBCMFPVUQVU61%08/ inhibit/enable through I2C
3P)4DPNQMJBOU
sequencing $"/#64BOE34JOUFSGBDFPQUJPO
Input
Input range
iVS1 & iVS3: 90-264 Vac 1Ø: 120-300 Vdc
iVS6 & iVS8: 170-264 Vac 3Ø
iVS8H: 480 Vac nominal 3Ø
380 Vac nominal 3Ø derate to 3800 W max.
210 W 360 W
Frequency 47-440 Hz
Inrush current 40 A peak maximum (soft start)
Efficiency Up to 85% @ full case load
Power factor 0.99 typ. meets EN61000-3-2
Turn-on time AC on 1.5 sec typical, inhibit/enable 150 ms typical.
Programmable
EMI Filter CISPR 22/EN55022 Level “B”
750 W 1500 W
Leakage current 300 µA max. @ 240 Vac; 47-63 Hz
Single Radiated EMI CISPR 22/EN55022 Level “B”
Holdover storage 10 ms minimum (independent of input Vac) additional
20 ms holdover storage with optional HUP module
(SEMI F47 compatible)
AC OK >5 ms early warning minutes before outputs lose regulation.

Full cycle ride thru (50 Hz). Programmable
Isolation Meets EN60950 and EN60601
(MPCBMJOIJCJUFOBCMF TTL, Logic “1” and Logic “0”/configurable
144 W 36 W
Warranty Three years
Dual Triple

Adjustment range* ±10% minimum all outputs (manual) Operating UP$BNCJFOU
(full module adjustment range using I2C) temperature Derate each output 2.5% per
Margining ±4-6% nominal analog (single output module only) EFHSFFGSPNUP$
$TUBSUVQ
Overall regulation 0.4% or 20 mV max. (1500 W modules 1% max.)

Storage $UP$
Ripple RMS: 0.1% or 10 mV, whichever is greater
temperature
Pk-Pk: 1.0% or 50 mV, whichever is greater
Bandwidth limited to 20 MHz Electromagnetic Designed to meet EN61000-4;
susceptibility -2, -3, -4, -5, -6, -8, -11 Level 3
Dynamic response <2% or 100 mV, with 25% load step
Recovery time To within 1% in <300 µ second Humidity Operating; non-condensing
10% to 95% RH
Overcurrent protection** Configurable through I C. single output module and main output
2
of the dual output module 105-120% of rated output current. Aux Vibration IEC68-2-6 to the levels of
output of dual output module 105-140% of rated output current. IEC721-3-2
Special programmable OCP delay on 1500 W module from 100 ms MTBF >550,000 hours at full load,
to 25.5 seconds with shutdown features demonstrated 7BDBOE$BNCJFOU
Short-circuit protection Protected for continuous short-circuit conditions
Recovery is automatic upon removal of short
(Shutdown mode on 1500 W module)
Overvoltage protection* Configurable through I2C Safety
¯4JOHMFPVUQVUNPEVMF 2-5.5 V 122-134%; 6-60 V 110-120%
UL UL60950/UL2601 (cCSAus)
¯%VBMPVUQVUNPEVMF 2-6 V 122-134%; 8-28 V 110-120%
¯5SJQMFPVUQVUNPEVMF No overvoltage protection provided CSA CSA22.2 No. 234 Level 5
Reverse voltage protection 100% of rated output current VDE EN60950/EN60950-1
Thermal protection* Configurable through I C2
Compliance to EN60950/
All outputs disabled when internal temp exceeds safe operating BABT
EN60601 BS7002
CB Certificate and report
Remote sense Up to 0.5 V total drop (not available on triple output module)
Single wire parallel Configurable through firmware CE Mark to LVD
Current share to within 2% of total rated current
DC OK* +/-5% of nominal. Configurable through I2C
Minimum load Not required
Housekeeping bias voltage 5 Vdc @1.0 A max. present whenever AC input is applied
Module inhibit* Configured and controlled through I2C
Switching frequency 250 kHz accepts external sync signal
Output/Output isolation >1 Megohm, 500 V
*Can be controlled via I2C
** Controlled via I2C but requires load calibration
Output Module Line-up

Module Code 1 2 3 5 4
Module Type Single Single Single Single Dual Triple
Max output power 210 W 360 W 750 W 1500 W 144 W 36 W
Max output current 35 A 60 A 150 A 140 A 10 A 2A
6 - 15, 24 - 28; 6 - 15; 6 - 15; 6 - 15; 8-15, 8-15, 2-6; 8-15, 8-15,
Output voltages available* 2-60 V 2-60 V 2-60 V 6-60 V 2 - 6; 2 - 6, 2 - 6; 24 - 28, 24 - 28; 8-15; 8-15, 8-15, 18-28; 8-15,
24 - 28; 2 - 6 18-28, 2-6
Standard voltage increments 25 25 25 18 16 18
Remote sense Yes Yes Yes Yes Yes Yes No
Remote margin* Yes Yes Yes Yes No No No
V-Program - I2C Control* Yes Yes Yes Yes Yes Yes No
Active Current Share Yes Yes Yes Yes Yes No No
Module Inhibit - I2C Control* Yes Yes Yes Yes Yes Yes Yes
Module Inhibit - Analog Yes Yes Yes Yes No No No
Overvoltage/Overcurrent protection* Yes Yes Yes Yes Yes Yes Yes
Minimum load required No No No No No No No
Slots occupied in any iMP case 1 2 3 4 1 1
* Programmable
Output Module Voltage/Current*

Single Output Module Code Dual Output** Triple Output I 2C
Voltage
Voltage Adjustment
Code
1 2 3 5 V1 V2 Ranges
2V A 35 A 60 A 150 A – 10 A 10 A – – 2A 1.8-2.2
2.2 V B 35 A 60 A 150 A – 10 A 10 A – – 2A 2.0-2.4
3V C 35 A 60 A 150 A – 10 A 10 A – – 2A 2.7-3.3
3.3 V D 35 A 60 A 150 A – 10 A 10 A – – 2A 3.0-3.6
5V E 35 A 60 A 150 A – 10 A 10 A – – 2A 4.5-5.5
5.2 V F 35 A 60 A 144 A – 10 A 10 A – – 2A 4.7-5.7
5.5 V ( 34 A 58 A 136 A – 10 A 10 A – – 2A 5.0-6.1
6V H 23 A 42 A 97.5 A 140 A 10 A*** 10 A*** – – 2A 5.4-6.6
8V I 20 A 36 A 84.4 A 140 A 10 A 4A 1A 1A 1A 7.2-8.8
10 V J 18 A 32 A 75 A 140 A 10 A 4A 1A 1A 1A 9.0-11.0
11 V K 17 A 31 A 68 A 136.3 A 10 A 4A 1A 1A 1A 9.9-12.1
12 V L 17 A 30 A 62.5 A 125 A 10 A 4A 1A 1A 1A 10.8-13.2
14 V M 14 A 21 A 53.5 A 107 A 9A 4A 1A 1A 1A 12.6-15.4
15 V N 14 A 20 A 50 A 100 A 8A 4A 1A 1A 1A 13.5-16.5
18 V O 11 A 19 A 41.6 A 83.3 A – – – 0.5 A 0.5 A 16.2-19.8
20 V P 10.5 A 18 A 37.5 A 75 A – – – 0.5 A 0.5 A 18.0-22.0
24 V Q 8.5 A 15 A 30 A 62.5 A 4A 2A – 0.5 A 0.5 A 21.6-26.4
28 V R 6.7 A 11 A 26.8 A 53.5 A 3A 2A 0.5 A 0.5 A 25.2-30.8
30 V S 6.5 A 11 A 25 A 50 A – – – – – 27.0-33.0
33 V T 6.2 A 10.9 A 22.7 A 35.8 – – – – – 29.7-36.3
36 V U 5.8 A 10 A 20.8 A 35.8 – – – – – 32.4-39.6
42 V V 4.2 A 7.5 A 16 A 35.7 – – – – – 37.8-46.2
48 V W 4A 7.5 A 15.6 A 31.2 – – – – – 43.2-52.8
54 V X 3.7 A 6A 13.9 A 27.7 – – – – – 48.6-59.4
60 V Y 3.5 A 6A 12.5 A 25 – – – – – 54.0-66.0
Consult Factory
Special Z 35 A 60 A 150 A – – 10 A – – – 2.3-2.6
Special Z 35 A 60 A 150 A – – 10 A – – – 3.7-4.4
Special Z 20 A 36 A 80 A 140 A – 8A – – – 6.7-7.1
* Note: Increments of current not shown can be achieved by paralleling modules
(add currents of each module selected)
**Total leading of outputs on dual module not to exceed 144 W.
*** Consult factory
Sample below is 3210 W case with 12 V @ 125 A; 24 V @ 8.5 A; 5 V @ 60 A; 12 V @ 10 A and 12 V @ 4 A; with no options.
Module/Voltage/Option Codes
First - Module Code
Case Size Second - Voltage Code Case Option Codes Software Code Hardware Code
Third - Option Code
iVS1 - 5L1 - 1Q1 - 2EO - 4LL0 - 00 - A - ###

Case Size (mm) Module Codes Case Option Codes Software code Factory assembled
1-Phase Input Module/voltage/option codes used for configu- for hardware of
1 = 5” x 5” x 11”; 1500-3210 W, 9 slots Module Codes: First Digit ration change. “A” firmware mods.
(127 x 127 x 279.4) (None) = 36 W triple O/P (1 slot) 0 - 9 = Parallel code (See parallel is standard
3 = 5” x 8” x 11”; 1800-4170 W, 15 slots 1 = 210 W single O/P (1 slot) codes table in datasheet)
(127 x 203.2 x 279.4) 2 = 360 W single O/P (2 slot)
3-Phase Input 3 = 750 W single O/P (3 slot) Second Digit
6 = 5” x 5” x 11”; 3120 W, 9 slots 5 = 1500 W single O/P (slot 4) 0 = No options
(127 x 127 x 279.4) 4 = 144 W dual O/P (1 slot) 1 = Reverse air
8 = 5” x 8” x 11”; 4170 W, 15 slots HUP = Extra 30mS hold-up (1 slot) 2 = Not used
(127 x 203.2 x 279.4) Voltage Codes: (MPCBMFOBCMF
8H= 5” x 8” x 11”; 4860 W, 14 slots See Output Module Voltage/Current 4 = Fan Off w/inhibit
(127 x 203.2 x 279.4) table above 5 = Opt 1 + Opt 3
Option Codes: 6 = Opt 1 + Opt 4 Ordering Note:
0 = Standard 7 = Opt 3 + Opt 4 1. USB to I2C module order code
1 = Module enable 8 = Opt 1 + 3 + 4
73-769-001
2 = Constant current 9 = CAN BUS/RS-485 73-544-001
3 = 1 & 2 combined B = USB 73-546-001
4 = Set for use in standard M = Medical
(non-intelligent case) N=M+1
5 = Shutdown mode for 1500 W P=M+3
6 = 1 & 5 combined R=M+1+3
7-9 Future
Case Specifications
iVS1 and iVS6
S S S S
L L L L
O O O O
Input
T T T T 100-264 Vac 180-264 Vac
9 8 7 6 iVS1 = 5” x 5” x 11” (127 x 127 x 254) 1500 W max. 3210 W max.
9 available slots
S S S S S
L L L L L iVS6 = 5” x 5” x 11” (127 x 127 x 254) N/A 3200 W max.
O O O O O 9 available slots
T T T T T
5 4 3 2 1
iVS3 and iVS8
S S S S S S
L L L L L L Input
O O O O O O 100-264 Vac 180-264 Vac
T T T T T T
iVS3 & 8 = 5” x 8” x 11” (127 x 177 x 254) 1800 W max. 4920 W max.
14 13 12 11 10 9
14 available slots
S S S S S S S S iVS3 & 8 = 5” x 8” x 11” (127 x 177 x 254) 480 Vac
L L L L L L L L 14 available slots 4920 W max.
O O O O O O O O
T T T T T T T T
8 7 6 5 4 3 2 1
Pin Connectors
Figure 1. ACNInput AC Input Single Phase 3 Phase
1
Pin No. Function
2 ~1 1 AC neutral 1 F1
1 N 1 N
2
3
~
2 2 AC line (hot)
2 ~
2 F2
3
3 3 Chassis
3 (earth) ground
3 F3
4 4 Chassis (earth) ground
4
Figure 1. AC Input
PFC Input Connector (control and signals)

1 Input AC OK - “emitter”
2 Input AC OK - “collector”
1 5 3 (MPCBM%$0,±FNJUUFS²
6 10
4 (MPCBM%$0,±DPMMFDUPS² Ordering Note:
5 No connection For possible iVS configurations,
Figure 2. Connector J1 6 (MPCBMJOIJCJUPQUJPOBMFOBCMFMPHJD±² please see datasheet.
Mates with
Molex 90142-0010 7 (MPCBMJOIJCJUPQUJPOBMFOBCMFMPHJD±²
Amp 87977-3 8 (MPCBMJOIJCJUPQUJPOBMFOBCMFSFUVSO
9 +5 Vsb housekeeping
10 +5 Vsb housekeeping return
I2C Bus Output Connector

1 No connection
2 No connection
3 No connection
4 Serial clock signal (SCL)
5 Serial data signal (SDA)
Mates with 6 Address bit 0 (A0)
Landwin 2050S1000 housing 7 Address bit 1 (A1)
2053T011P pin 8 Address bit 2 (A2)
9 4FDPOEBSZSFUVSO (/%
10 5 Vcc external bus (5 Vcc bus)
Bulk Power
Bulk Power (HPS & UFE)

350-6000 Watts
Special Features
&/IBSNPOJD 0WFSDVSSFOUQSPUFDUJPO
compliance HPS3000
0WFSWPMUBHFQSPUFDUJPO
#VJMUJO&.*GJMUFS 0WFSUFNQFSBUVSF
-PXPVUQVUSJQQMF protection
7TUBOECZPVUQVU #VJMUJO03´JOHEJPEFT
#VJMUJODPPMJOHGBOT "DUJWFQPXFSGBDUPS HPS3000 Electrical Specifications
)PUTXBQ/SFEVOEBOU correction Input
Input range (operating) 180-264 Vac
New Features Coming Soon 90-140 Vac
8)14 Input range (nominal) 200 Vac
)13,SBDLGPS)14 110 Vac
Frequency 43-63 Hz
Voltage Availability Input fusing Internal 25 A fuses (both lines fused)
Model HPS3000 HPS35 HPS15 UFE Inrush current "QFBL FJUIFSIPUPSDPMETUBSU
Wattage 3000 W4 350 W 1500 W3 2000 W5

90-140 Vac Power factor 0.97 typical (Meets EN61000-3-2)
Input Voltage 90-264 Vac 90-265 Vac 90-265 Vac
180-264 Vac Harmonics Meets IEC 1000-3-2 requirements @ 50% load
Available Standard Output Voltages (order code) 1
Input current 19 A max input current
12 (L) Holdup time 10 ms min @ full rated load
24 (Q)
28 (R) Leakage current 1.4 mA @ 240 Vac
30 (S) Power line transient MOV directly after the fuse
48 (W) Output
54 (X) Output rating 48 V @ 62.0 A (180-264 Vac)
60 (Y) 5 Vsb @ 3.0 A
Available Options See Note 1 See Note 1 See Note 1
48 V @ 29.4 A (90-140 Vac)
Corresponding Rack See Note 2 HPR1-00 HPR3-00 UFR6000J
5V@3A
Notes: 1 = Consult factory for other output voltages and options Set point 48 V (Programmable ±10% through I2C serial bus)
2= Comes with I2C interface
3= 1200 W @ 90-264 Vac; 1500 W @ 100-264 Vac Total regulation range 48 V ± 10%; 5 Vsb ± 4% (line/load/transient when
4= 3000 W @ 180-264 Vac; 1500 W @ 90-140 Vac measured at output connection)
5= 2000 W @ 48 V; 1300 W @ 24 V
Rated load 3000 W maximum @ 200 Vac Input
1500 W maximum @ 110 Vac Input
Environmental Specifications (no derating over operating temperature range)
HPS15 and HPS35 Minimum load 48 V @ 0.0 A 5; Vsb @ 0.0 A with no loss of regulation
Operating temp. $UP$BNCJFOU EFSBUFPVUQVU! Output noise 480 mV max P-P for 48 V output
QFSEFHSFFGSPN$UP$
100 mV max P-P for 5 Vsb output
Measured with a 0.1µF Ceramic and 10 µF
HPS3000 Tantalum capacitor on any input
Operating temp. $UP$
Output voltage overshoot ± 5% maximum of nominal voltage setting
Storage temp. $UP$ Transient response 5% maximum deviation (50% load step @ 1 A/us.
Cooling External fans with Fan Fail and Fan Speed control Step load valid between 10-100% of
output rating)
Humidity Operating/Storage: 5-95% non-condensing
Max units in parallel Up to 4 (total power in 1U 19” rack is 12 KW)
Altitude Operating: Up to 10,000 feet above sea level
Storage: Up to 30,000 feet above sea level Short circuit protection 120-130% of rated output (output to return)
Vibration/Shock /POPQFSBUJPOBM(4JOFTXFFQGSPN Output isolation Per POE specs (>2000 Vac)

5-500 Hz, dwelling at resonant frequencies Forced load sharing Within 10% of all shared outputs (digital sharing
for one hour each control)
RoHS compliant Yes Overcurrent protection 120-130% for 48 V output
(OCP) 100-125% for 5 Vsb output
Safety Overvoltage protection 110-120% for 48 V output
(OVP) 110-125% for 5 Vsb output
UL UL60950 (UL recognized)
Overtemperature $UP$BCPWFTBGFPQFSBUJOHBSFB
NEMKO EN60950
protection (Both PFC and output converter monitored. 5 Vsb
TÜV EN60950
will operate under overtemperature condition.
CE Mark Built-in hysteresis.)
CB Report
Bulk Power
HPS15 Electrical Specifications

Input
HPS35 Input voltage 1200 W @ 90-264 Vac
1500 W @180-264 Vac
Frequency 47-440 Hz
HPS15 Modules Inrush current "QFBLNBY!$
in HPR3 Rack Efficiency 85% typ. @ full load, 230 Vac
Power factor 0.99 typ. meets EN61000-3-2
HPS35 Electrical Specifications
Turn-on time AC on 1.5 sec typical
Input Inhibit/enable 100ms typical
Input voltage 90-264 Vac typical EMI filter standard CISPR 22; EN55022 Level “B”
Frequency 47-440 Hz Leakage current standard 2 mA max @ 264 Vac @ 60 Hz per module
Inrush current "QFBLNBY!$ Radiated EMI CISPR 22; EN55022 Level “B”
Efficiency 80% typical @ full load, 230 Vac Holdup time 20 ms minimum (independent of input Vac)
Power factor 0.99 typical @ 115 Vac, full load AC OK >5 ms early warning min. before outputs lose
regulation. Full cycle ride thru (50 Hz)
Turn-on time AC on 2 sec; inhibit/enable 160 ms typical
EMI filter standard CISPR 22; EN55022 Level “B”
Leakage current standard <0.5 mA max @ 230 Vac @ 60 Hz per module
Output
Radiated EMI CISPR 22; EN55022 Level “B”
Margining ±5% of nominal
Holdover time 20 ms minimum (independent of input Vac)
Overall regulation ±1%
AC OK 5 ms early warning minutes before outputs
Ripple 1% of Vout Pk-Pk limited to 20 MHz
lose regulation
Dynamic response 2% with 25% load step
Recovery time To within 1% in <300 µsec
Overcurrent protection 105-120% of rated output current
Output
Short-circuit protection Protected for continuous short-circuit
Adjustability ±5% of nominal output voltage Recovery is automatic upon removal of short
Overall regulation ±2% Overvoltage protection 105-120%. Recycle AC input voltage to reset
Ripple 1% of Vout Pk-Pk (20 MHz bandwidth) OVP circuit
Reverse voltage protection 100% of rated output current
Dynamic response 4% with 25% load step
Thermal protection Main and Aux disabled when internal temp
Recovery time To within 1% in <300 µsec
exceeds safe operating range.
Overcurrent protection 115-130% of rated output current
Remote sense Up to 0.5 V total drop
Protected for continuous short-circuit
Short-circuit protection Single wire parallel Current share to within 10% of total rated current
Auto recovery
Overvoltage protection 120-140%. AC Reset DC OK ±5% of nominal
Reverse voltage protection 100% of rated output current Minimum load* Not required
Main and Aux disabled when internal Standby voltage 5 Vdc @ 5 A max. present whenever AC input is
Thermal protection applied (3.3 V @ 5 A optional)
temperature exceeds safe operating range
Remote sense Up to 0.5 V total drop (MPCBMJOIJCJU Logic “0” standard logic “1” optional
*3 A minimum for current share operation
Current share to within 10% of total
Single wire parallel
rated current on main output
DC OK ±5% of nominal
Minimum load* Not required (when used as stand-alone module)
Standby voltage
5 Vdc @ 2 A maximum present Ordering Information
whenever AC input is applied
Voltage Code Redundancy
(MPCBMJOIJCJU Logic “0”
(L - Y) always R
*3 A minimum for current share operation
Standard Option Codes (000 - 256)
Refer to datasheet
HPS - R-
Rack Ordering Information Power/Series I Monitor
Aux Fan voltage
(HPS15 only)
Module UFE1300/2000 HPS3000 HPS35 HPS15 35-350 W (HPS15 only) N = none
Rack # UFR6000 NA HPR1-00** HPR3-00** 15-1500 W N = none 3 = 12 V @ 4 A
# of Slots 3 NA 4 4 3K-3000 W A = current monitor 5 = 24 V @ 2 A
Total Power 6000 W NA 1400 W 6000 W
**See website for option codes on HPR racks. For the HPS3000, the ordering part number is HPS3000-9
Bulk Power
UFE1300/2000 Electrical Specifications

Input Output
88-264 Vac 48 V 2000 W (high line range)
Input range (operating)
176-264 Vac Output rating - Main output 48 V 1300 W (wide range)
120 Vac 24 V 1300 W (all ranges)
Input range (nominal)
240 Vac Output rating - Auxiliary output 11 V +/-15%, 2.875 W
Frequency 47-63 Hz Line regulation +/-0.15% max.
Input fusing 30 A (both lines fused) Load regulation +/-0.15% max.
Power factor 0.98 (50-100% load) Turn-on delay 5.0 seconds max.
Input current 15 A max. Ambient temp. coefficient $
Leakage current 2 mA max. 48 V 42-57 Vdc
Voltage adjustability (via PMBus)
176 Vac max. (high line range) 24 V 21-28.5 Vdc
Undervoltage lockout (power up)
88 Vac max. (wide range) Output setpoint accuracy ±0.5%
162 Vac min.(high line range) 48 V ± 0.5% @ 41 A
Undervoltage lockout (power down) %FGBVMUPVUQVUWPMUBHF !$
76 Vac min. (wide range) 27 V ± 0.5% @ 48 A

Total error band ± 1.0% max.
UFE Power Shelf Overshoot/undershoot 0%

Ripple and noise (20 MHz) 500 mV pk-pk, 150 mV rms
Dynamic regulation
2.5% max., recovery in 1 ms max.
(except droop mode)
Current sharing 15% max.
Electrical insulation 4242 Vdc input/output
Switching frequency 450 kHz fixed
Power limit 115%
Current limit 108% typical
Short-circuit 200 ms on; 1/8 second off
Overvoltage 60 V/32 V
UFE2000
Overtemperature Non-latching
Product Rated Output Input Standard Type of Output Communications Option Code Special RoHS
Family Power Range Compliance Output Voltage Type Modification Compliance
UFE 2000 9 6 S 48 P D xx J
UFE = Universal 1300 = 1300 Watts 9 = Universal 6 = UL/CSA/VDE S = Single 48 = 48 V P = PMBus serial None = Active Ishare J = Pb free
Front-End 2000 = 2000 Watts Input with Class A/B 24 = 24 V communications D = Droop Ishare (RoHS 6/6
PFC HD = PS Enable compliant)
HI/Droop
Rated Output Voltage Output Power Limit Line Range at Current Limit
Vout Operating Model Order
Output Current + 15% / -0% Turn On (Auto (Vout) < Vout
Line Range Numbers Number
Power Min Max (Min) Vout (min) Ranging) (min)
24 Vout Models
1300 W 21 V 28.5 V 0A 1300 W 90-264 Vac 65 A 65 A UFE1300-96S24PJ UFE1300-5
48 Vout Models
1300 W 42 V 57 V 0A 1300 W 90-264 Vac 33 A 33 A
UFE2000-96S48PJ UFE2000-9
2000 W 42 V 57 V 0A 2000 W 180-264 Vac 52 A 52 A
1300 W 42 V 57 V 0A 1300 W 90-264 Vac 33 A 33 A
UFE2000-96S48PDJ UFE2000-9-HD
2000 W 42 V 57 V 0A 2000 W 180-264 Vac 52 A 52 A
1300 W 42 V 57 V 0A 1300 W 90-264 Vac 33 A 33 A
UFE2000-96S48PHDJ UFE2000-9-D
2000 W 42 V 57 V 0A 2000 W 180-264 Vac 52 A 52 A
Distributed Power
Distributed Power Systems (DS)

AC and DC inputs available
450-2900 Watts
Special Features
"DUJWFQPXFSGBDUPSDPSSFDUJPO *2C Interface with EEPROM for FRU data
&/IBSNPOJDDPNQMJBODF *OUFSOBMGBOTQFFEDPOUSPMXJUIGBO
"DUJWF"$JOSVTIDPOUSPM fail signal
)JHIEFOTJUZ %$*OQVU
DS450DC/DS2900
0VUQVUT7EDXJUITPNF7ED %43SBDLGPS%4
models available Standard 19” 1U fits up to 5 modules
(4250 Watts)
7EDTUBOECZ
%43SBDLGPS%4
0QUJPOTGPS7TUBOECZWPMUBHF Standard 19” 2U fits up to 3 modules
/PNJOJNVNMPBESFRVJSFE (4500 Watts)
)PUQMVHPQFSBUJPO (PMEFGGJDJFODZTUBOEBSETPOTPNFNPEFMT
/SFEVOEBOU
*OUFSOBM03´JOH'&5T
"DUJWFDVSSFOUTIBSJOH
#VJMUJODPPMJOHGBOT
New Products and Features

Coming Soon
0QUJPOTGPSSFWFSTFBJSGMPX
0QUJPOTGPS7TUBOECZ
1MBUJOVN1MVTFGGJDJFODZPOTPNFNPEFMT
Voltage Availability Safety

Model 12 V 24 V 48 V PMBus UL UL60950 (UL recognized)
NEMKO EN60950
(-3) (-5) (-9)
TÜV EN60950
DS450 CE Mark
DS450DC CB Report
DS460S
DS550
DS550DC
DS650
DS650DC
DS760SL
DS800SL
* *
DS850
DS850DC
DS1050
DS1200

DS1500
DS2000
DS2900
Notes: Available * Coming in late 2010
Distributed Power
DS460 DS550DC
Data DS450-3 DS450DC-3 DS460S-3 DS550-3 DS550DC-3
Input
Input Range 90-264 Vac 40-72 Vdc 90-264 Vac 90-264 Vac 40-72 Vdc
Frequency 47-63 Hz DC 47-63 Hz 47-63 Hz DC
Efficiency 80% Typ 80% Typ 92% Typ 80% Typ 80% Typ
EMI/RFI Class B N/A Class B Class B N/A
Leakage Current 1.4 mA @ 240 V N/A 1.0 mA @ 240 V 1.4 mA @ 240 V N/A
Outputs
Output Main 12 V / 37 A 12 V / 37 A 12 V / 38.2 A 12 V / 45 A 12 V / 45 A
Output Stand-By 3.3 Vsb / 3 A 3.3 Vsb / 3 A 12 Vsb / 2.5 A 3.3 Vsb / 3 A 3.3 Vsb / 3 A
OCP/OVP/OTP YES YES YES YES YES
I2C Control YES YES YES YES YES
Environmental
Operating Temp $UP$ $UP$ $UP$ $UP$ $UP$
Derating N/A N/A N/A N/A N/A
Storage $UP$ $UP$ $UP$ $UP$ $UP$
RoHS Compliant YES YES YES YES YES
MTBF 300K Hours 500K Hours 500K Hours 300K Hours 500K Hours
Other:
Size (inch) 1.57 x 3.07 x 11.05 1.57 x 3.07 x 11.05 1.57 x 3.4 x 7.75 1.57 x 3.07 x 11.05 1.57 x 3.07 x 11.05
Size (mm) 40 x 78 x 280 40 x 78 x 280 40 x 86.4 x 197 40 x 78 x 280 40 x 78 x 280
Power Density 8.42 8.42 11.12 10.30 10.30
Cubic Inches 53.42 53.42 41.37 53.42 53.42
Pro-E Files NO YES YES NO YES
Thermal Data YES YES YES YES YES
PQ Airflow Curves YES YES YES YES YES
Warranty Two Year Two Year Two Year Two Year Two Year
Ordering Codes
Standard DS450-3 DS450DC-3 DS460S-3 DS550-3 DS550DC-3
ALT Standby DS450-3-001 DS450DC-3-004 DS550-3-001 DS550DC-3-004
Reverse Air DS450-3-002 DS450DC-3-002 DS460S-3-001 DS550-3-002 DS550DC-3-003
ALT Standby & Reverse Air DS450-3-004 DS450DC-3-005 DS550-3-004 DS550DC-3-005
Fan Off with inhibit
Disable External Fan Drive DS450-3-003
Distributed Power
DS650/DS850
DS760SL
Data DS650-3 DS650-5 DS650-9 DS650DC-3 DS760SL-3

Input
Input Range 90-264 Vac 90-264 Vac 90-264 Vac 40-72 Vdc 90-264 Vac
Frequency 47-63 Hz 47-63 Hz 47-63 Hz DC 47-63 Hz
Efficiency 80% Typ 80% Typ 82% Typ 80% Typ 90% Typ
EMI/RFI Class B Class B Class B N/A Class A
Leakage Current 1.4 mA @ 240 V 1.4 mA @ 240 V 1.4 mA @ 240 V N/A 0.8 mA @240 V
Outputs
Output Main 12 V / 52.5 A 24 V / 26.3 A 48 V / 13.1 A 12 V / 52.5 A 12 V / 62.3 A
Output Stand-By 3.3 Vsb / 6 A 3.3 Vsb / 6 A 3.3 Vsb / 6 A 3.3 Vsb / 6 A 5.0 Vsb / 3.6 A
Environmental
Derating BU$ BU$ BU$ BU$ N/A
Other:
Size (mm) 40 x 81.3 x 279.4 40 x 81.3 x 279.4 40 x 81.3 x 279.4 40 x 81.3 x 279.4 40 x 54.5 x 322
Power Density 11.76 11.76 11.76 11.76 17.76
Cubic Inches 55.44 55.44 55.44 55.44 42.8
Pro-E Files YES YES YES YES YES
Ordering Codes
Standard DS650-3 DS650-5 DS650-9 DS650DC-3 DS760SL-3
ALT Standby DS650-3-002 DS650-5-001 DS650-9-002 DS650DC-3-002
Reverse Air DS650-3-007 DS650-5-002 DS650-9-004 DS650DC-3-003 DS760SL-3-001
ALT Standby & Reverse Air DS650-3-008 DS650-5-003 DS650-9-005 DS650DC-3-004
Fan Off with inhibit
Disable External Fan Drive DS650DC-3-001 DS850DC-3-001
Distributed Power
DS850 DS850DC
Data DS800SL-3 DS850-3 DS850-5 DS850-9 DS850DC-3

Input:
Input Range 90-264 Vac 90-264 Vac 90-264 Vac 90-264 Vac 40-72 Vdc
Frequency 47-63 Hz 47-63 Hz 47-63 Hz 47-63 Hz DC
Efficiency 5ZQ(-% 82% Typ 82% Typ 83% Typ 80% Typ
EMI/RFI Class A Class B Class B Class B N/A
Leakage Current 0.8 mA @240 V 1.4 mA @ 240 V 1.4 mA @ 240 V 1.4 mA @ 240 V N/A
Outputs:
Output Main 12 V / 66.7 A 12 V / 70 A 24 V / 35 A 48 V / 17.5 A 12 V / 70 A
Output Stand-By 5.0 Vsb / 4 A 3.3 Vsb / 6 A 3.3 Vsb / 6 A 3.3 Vsb / 6 A 3.3 Vsb / 6 A
Environmental
Derating N/A BU$ BU$ BU$ BU$
Other:
Size (mm) 40 x 54.5 x 322 40 x 81.3 x 279.4 40 x 81.3 x 279.4 40 x 81.3 x 279.4 40 x 81.3 x 279.4
Power Density 18.69 15.38 15.38 15.38 15.38
Cubic Inches 42.8 55.44 55.44 55.44 55.44
Pro-E Files YES YES YES YES YES
Ordering Codes
Standard DS800SL-3 DS850-3 DS850-5 DS850-9 DS850DC-3
ALT Standby DS850-3-002 DS850-5-001 DS850-9-002 DS850DC-3-003
Reverse Air DS850-3-006 DS850-5-002 DS850-9-003 DS850DC-3-004
ALT Standby & Reverse Air DS850-3-008 DS850-5-003 DS850-9-004 DS850DC-3-005
Fan Off with inhibit DS850-3-004
Disable External Fan Drive
Distributed Power
DS2000 DS2900
DS1200
Data DS1050-3 DS1200-3 DS1200DC-3 DS1500-3 DS2000-3 DS2900

Input:
Input Range 90-264 Vac 90-264 Vac 40-72 Vdc 90-264 Vac 90-264 Vac 180-264 Vac
Frequency 47-63 Hz 47-63 Hz DC 47-63 Hz 47-63 Hz 47-63 Hz
Efficiency 5ZQ(-% 90% Typ 86% Typ 80% Typ 87% Typ 90% Typ
EMI/RFI Class B Class B N/A Class B Class B Class B
Leakage Current 1.4 mA @ 240 V 1.4 mA @ 240 V N/A 1.4 mA @ 240 V 1.4 mA @ 24 0V 1.4 mA @ 240 V
Outputs:
Output Main 12 V / 85.5 A 12 V / 98 A 12 V / 98 A 12 V / 123 A 12 V / 165 A 12 V / 240 A
Output Stand-By 3.3 Vsb / 6 A 3.3 Vsb / 6 A 3.3 Vsb / 6 A 3.3 Vsb / 7 A 3.3 Vsb / 6 A 3.3 Vsb / 3 A
OCP/OVP/OTP YES YES YES YES YES YES
I2C Control YES YES YES NO YES YES
Environmental
Operating Temp $UP$ $UP$ $UP$ $UP$ $UP$ $UP$
Derating BU$ BU$ BU$ BU$ N/A N/A
Storage $UP$ $UP$ $UP$ $UP$ $UP$ $UP$
RoHS Compliant YES YES YES YES YES YES
MTBF 500K Hours 500K Hours 500K Hours 500K Hours 500K Hours 500K Hours
Other:
Size (inch) 1.57 x 3.20 x 11.00 1.57 x 3.20 x 11.00 1.57 x 3.20 x 11.00 2.8 x 4.9 x 7.5 1.57 x 4.2 x 11.6 3.07 x 4.17 x 8.5
Size (mm) 40 x 81.3 x 279.4 40 x 81.3 x 279.4 40 x 81.3 x 279.4 71.1 x 124.5 x 190.5 40 x 106.7 x 295.7 78 x 106 x 217
Power Density 18.95 21.71 21.71 12.63 26.2 26.7
Cubic Inches 55.44 55.44 55.44 102.9 76.5 108.8
Pro-E Files YES YES YES YES YES YES
Thermal Data YES YES YES YES YES YES
PQ Airflow Curves YES YES YES YES YES YES
Warranty Two Year Two Year Two Year Two Year Two Year Two Year
Ordering Codes
Standard DS1050-3 DS1200-3 DS1200DC-3 DS1500-3 DS2000-3 DS2900-3
ALT Standby DS1050-3-002 DS1200-3-002 DS1200DC-3-002 DS2000-3-002 DS2900-3-002
Reverse Air DS1050-3-001 DS1200-3-003 DS1200DC-3-001 DS1500-3-001 DS2000-3-001 DS2900-3-001
ALT Standby & Reverse Air DS1050-3-003 DS1200-3-004 DS1200DC-3-003 DS2900-3-003
Fan Off with inhibit DS850-3-004
Disable External Fan Drive
DIN Rail
DIN Rail ADN-C Series

120-480 Watts
Special Features
4MJNGPSNGBDUPS 4&.*'4BH*NNVOJUZ
'JWFZFBSXBSSBOUZ /FXWJTVBMEJBHOPTUJD-&%
)JHIFGGJDJFODZ5ZQ 5ISFF4UBUVT-&%T
'VMMQPXFSBU$ ¯*OQVU 0VUQVU "MBSN
1PXFS#PPTU %$0,3FMBZ
*OEVTUSJBM(SBEF%FTJHO 1BSBMMFMPQFSBUJPODBQBCJMJUZ
¯1BUFOUFENFUBMNPVOUJOHDMJQ 4DSFXUFSNJOBMDPOOFDUJPOT
¯.FUBMDBTF 3P)4DPNQMJBOU
.5#' IEFNPOTUSBUFE /PUPPMTSFRVJSFEGPSNPVOUJOH
BU$
"DUJWF1'$ Models Coming Soon
"EKVTUBCMFPVUQVU "TJOHMFQIBTF
0WFSWPMUBHFQSPUFDUJPOXJUI 5ISFFQIBTF
auto recovery
$POUJOVPVTTIPSUDJSDVJUBOE
overload protection
Input Output
AC Input range Nominal: 115-230 Vac Nominal voltage ADN5-24-1PM-C & ADN10-24-1PM-C: 24 Vdc
85-264 Vac (22.5-28.5 Vdc Adj)
ADN20-24-1PM-C: 24 Vdc (24-28 Vdc Adj)
DC Input range 90-375 Vdc
Frequency 47-67 Hz, 400 Hz Initial voltage setting 24.5 V ± 1%
Hold-up time > 20 ms at full load (100 Vac Input @
Efficiency > 90% 5BNC$

Inrush current ADN5-24-1PM-C: < 15 A Voltage regulation < ± 2% (combination line, load, time and
ADN10-24-1PM-C: < 30 A temperature related changes)
ADN20-24-1PM-C: < 40 A
Ripple ADN5-24-1PM-C & ADN10-24-1PM-C: < 50 mVpp
PFC Active, better than 0.92
ADN20-24-1PM-C: < 100 mVpp
Back EMF immunity < 35 Vdc
Power Boost™ 1.5 x Nominal current for 4 seconds.
Short-circuit current 1.5 x Nominal current at near zero volts at short-
circuit condition
Parallel operation Switch selectable single unit or parallel unit
operation. Units will not be damaged by parallel
operation (regardless of switch position setting)
Ouput noise suppression Radiated EMI values below EN61000-6-2
Overvoltage protection > 30.5 Vdc but < 33 Vdc, auto recovery
Line and load regulation < 0.5%
Time and temperature drift < 1%
Power Voltage Current Size L x W x H (mm) Weight Model Number
85-264 Vac 4.85” x 1.97” x 4.37” 1.65 lbs

120 W 90-375 Vac
5A
(123 x 50 x 111) (750 g)
ADN5-24-1PM-C
85-264 Vac 4.85” x 2.36” x 4.37” 1.98 lbs

240 W 90-375 Vac
10 A
(123 x 60 x 111) (900 g)
ADN10-24-1PM-C
85-264 Vac 4.85” x 3.42” x 4.96” 2.60 lbs

480 W 90-375 Vac
20 A
(123 x 87 x 126) (1200 g)
ADN20-24-1PM-C
MicroTCA
MicroTCA® Power Modules

MTC600 Series
600 Watts
Special Features
8PVUQVUQPXFS
DIBOOFMTPG
¯7!"NBY
¯7!N"NBY
4VQQPSUT
¯Y".$T
¯Y.$)T
¯Y$6T
4VQQPSUT/PVUQVUSFEVOEBODZ /
4VQQPSUTJOQVUSFEVOEBODZ
Compliance
1*$.(® MicroTCA.0 (Revision 1.0)
1*$.()1.'JSNXBSF6QHSBEF
(Revision 1.0)
Input Single Phase
-48 Vdc Models
Input range (operating) -39.5 to -72 Vdc Supports -48 V and -60 V battery plants
Power Module may or may not
0 to -39.5 Vdc
Input range (non-operating) operate in part of this range, but will
-72 to -75 Vdc
not be damaged
Protected against reverse polarity over
Reverse polarity protection Included
magnitude of specified input range
AC Models
Supports typical worldwide
Input range (operating) 90-264 Vac
single-phase inputs
Power Module may or may not
0-90 Vac
Input range (non-operating) operate in part of this range, but will
264-282 Vac
not be damaged
Power factor 0.99 typical Meets EN61000-3-2
Output - All Models
12 V Outputs (Payload Power)
Configured as Primary PM
Setpoint 12.6 Vdc typical
Configured as Redundant PM
12.25-12.95 Vdc Configured as Primary PM

Total regulation range 11.60-12.00 Vdc Configured as Redundant PM
600 W maximum Per power module, input voltage

Rated load 80 W/7.6 A maximum Per load channel
Minimum load No load /PMPTTPGSFHVMBUJPO7SNT
Output rise time (per channel) 25 ms maximum With 1600 µF on output under test
Output noise (PARD) 75 mV maximum 0 to 30 MHz
100 mV maximum 0 to 100 MHZ
Measured with a 0.1 µF ceramic and 10 µF
tantalum capacitor on any output and
oscilloscope bandwidth set for 200 MHz
MicroTCA
Output - All Models (continued)
3.3 V Outputs (Management Power)
Setpoint 3.3 Vdc typical
Total regulation range 3.16-3.63 Vdc
Rated load 8 W maximum Per power module
0.5 W/150 mA maximum Per load channel
Minimum load No load /PMPTTPGSFHVMBUJPO7SNT
Output rise time 25 ms maximum With 150 µF on output under test
(per channel)
Output noise (PARD) 50 mV maximum 0-30 MHz
75 mV maximum 0-100 MHZ
Measured with a 0.1 µF ceramic and 10 µF tantalum
capacitor on any output
Transient response 3% maximum deviation 37.5 mA loadstep @ 1 A/µs referenced to load current
2 ms recovery time and setpoint at onset of transient. Recovery time to within
1% of setpoint at onset of transient
Temperature and Altitude Derating Safety

Condition Temperature UL, cUL UL60950-1
Storage non-operating $UP$ CSA 60950-1
Cold start $UP$ VDE 60950-1
Normal operating $UP$

Short-term operating $UP$
Category Specifications
Conducted emissions EN55022 Class A
(3$03&
Radiated emissions EN55022 Class A
Electrostatic discharge (ESD) EN61000-4-2
Immunity to radiated fields EN61000-4-3
Electrical fast transients (burst) EN61000-4-4
Surge immunity EN61000-4-5
Immunity to conducted noise EN61000-4-6
Power Level Input Voltage Redundant Channel Width Height Reserved
Count
MTC PPP - VV RR NN W H XX J
600 = 600 W 48 = -48 Vdc RR = Redundant 16 = 16 ch S = Single 9 = 9 HP For modified
AC = 90-264 Vac input and width 1 = 12 HP standards
redundant
output
NR = Non-redundant
input and
redundant
output
DC—DC Converters
Emerson Network Power is widely
acknowledged as an industry leader
in distributed power applications and
produces an exceptionally wide range
of DC—DC conversion products.
DC—DC Converters
Distributed Power
Architecture
Emerson Network Power understands the needs From full-system power to board-level components,
and nuances of developing power systems using high-power isolated front ends to a full line of isolated
a Distributed Power Architecture. We know it is BOEOPOJTPMBUFE%$¯%$NPEVMFT &NFSTPO/FUXPSL
your job to create the most efficient, cost-effective, Power is the source for today’s power systems.
quality system, and deliver it in a timely fashion.
Distributed Power Architecture DC-DC Conversion
12 Vdc 1.0 V
-(" ASICs
Enterprise 2.3 V
Applications
VRM DSPs
AC-DC
3.3 V
Memory
DDR
48 Vdc 12 Vdc
Quarter-brick Fans
LQS
Telecom
Applications 5 Vdc
Analog
AC-DC Eighth-brick
LES
2.5 Vdc
-(" DSPs
Sixteenth-brick
ALD
1.2 Vdc
-(" '1("T
ATCA Modules
Advanced Telecommunications
Computing Architecture (ATCA®)
210 Watt & 250 Watt Modules
Special Features
'VMMZJOUFHSBUFEJOQVUQPXFSNPEVMFBOE 7NBJOPVUQVUXJUI7QPXFS
intermediate bus converter solution for management supply
high density ATCA applications )BSEXBSFBMBSNTWJBPQUPJTPMBUPST
03´JOHGPS"#EVBM7EDQPXFSGFFET for loss of A or B feeds
)PUTXBQDBQBCJMJUZXJUIJOSVTIQSPUFDUJPO *2C serial bus interface for monitoring
&.*GJMUFSJOH and reporting
*OEFQFOEFOU7DMBNQPVUQVUGPS 1SPHSBNNBCMFBMBSNUISFTIPMETWJB*2C
ATC250 charging external hold up capacitors *OUFSOBUJPOBMTBGFUZTUBOEBSETBQQSPWBMT
(programmable to 80 V on ATC250) UL, CSA, TÜV and CB report
Vout Iout Input Voltage Package L x W x H (mm) Efficiency Model Number
12/3.3 V ATCA Open-frame

17.5/1.8 A -48 V (-36 to -72 V) 2.32” x 1.81” x 0.83” (58.93 x 45.97 x 21.08) 89% ATC210-48D12-03J
20.83/4.5 A -48 V (-36 to -72 V) 2.32” x 1.81” x 0.83” (58.93 x 45.97 x 21.08) 89% ATC250-48D12-03J
ATCA Blades with Real Estate Constraints
Single Board Computer AMC Carrier Blade
The ATC210 and ATC250 provides board designers with an

easy to use fully-integrated power module for space-constrained
blades and AMCs.
The ATC210 and ATC250 are fully-integrated functionality is facilitated by both I2C serial
modules that are more than just power bus and direct hardware alarms for loss of
converters. They also provide power interface A or B -48 Vdc input feeds or open fuses.
and power management functionality. The The ATC210 and ATC250 provide ATCA
power interface functions include OR’ing, board designers with a compact and
filtering, inrush control and auxiliary 3.3 Vdc optimized solution for space-constrained
output, while power management blades and AMCs.
Industry Standard Isolated
Sixteenth-Brick
Special Features
*OEVTUSZMFBEJOHTJYUFFOUICSJDLTUBOEBSEQBDLBHFBOEGFBUVSFTFUT
4DBMBCMFPGGFSJOH8BOE8QMBUGPSNT
.FDIBOJDBMPQUJPOTGPSPQUJNVNNPVOUJOHGMFYJCJMJUZ5ISPVHIIPMF
(default) or surface mount (suffix “-S”) termination; 5 mm (default)
or 3.7 mm through-hole pin length option
ALD10 ALD18F48 .FFUTCBTJDJOTVMBUJPO
1PXFSEFOTJUJFTBTIJHIBT8QFSDVCJDJODI
*OUFSOBUJPOBMTBGFUZTUBOEBSETBQQSPWBMT¯6- $4" 5f7

1.2 V Open-frame
15 A 48 V (36-75 V) 1.3" x 0.9" x 0.35" (33 x 22.86 x 8.89) 84% ALD15K48N-L
25 A 48 V (36-75 V) 1.3" x 0.9" x 0.35" (33 x 22.86 x 8.89) 84% ALD25K48N-L
1.5 V Open-frame
15 A 48 V (36-75 V) 1.3" x 0.9" x 0.35" (33 x 22.86 x 8.89) 85% ALD15M48N-L
25 A 48 V (36-75 V) 1.3" x 0.9" x 0.35" (33 x 22.86 x 8.89) 85% ALD25M48N-L
1.8 V Open-frame
13 A 48 V (36-75 V) 1.3" x 0.9" x 0.35" (33 x 22.86 x 8.89) 87% ALD13Y48N-L
25 A 48 V (36-75 V) 1.3" x 0.9" x 0.35" (33 x 22.86 x 8.89) 88% ALD25Y48N-L
2.5 V Open-frame
11 A 48 V (36-75 V) 1.3" x 0.9" x 0.35" (33 x 22.86 x 8.89) 89% "-%(/-
20 A 48 V (36-75 V) 1.3" x 0.9" x 0.35" (33 x 22.86 x 8.89) 89% "-%(/-
3.3 V Open-frame
10 A 48 V (36-75 V) 1.3" x 0.9" x 0.35" (33 x 22.86 x 8.89) 90% ALD10F48N-L
18 A 48 V (36-75 V) 1.3" x 0.9" x 0.35" (33 x 22.86 x 8.89) 90% ALD18F48N-L
5V Open-frame
7A 48 V (36-75 V) 1.3" x 0.9" x 0.35" (33 x 22.86 x 8.89) 91% ALD07A48N-L
12 A 48 V (36-75 V) 1.3" x 0.9" x 0.35" (33 x 22.86 x 8.89) 91% ALD12A48N-L
12 V Open-frame
2.75 A 48 V (36-75 V) 1.3” x 0.9” x 0.35” (33 x 22.86 x 8.89) 92% ALD03B48N-L
Footprint/Package Leverage
Increase
Increase 1/16
Common Features 1/4 1/8 Brick
Brick Brick Decrease
0QFOGSBNFPSCBTFQMBUF
5ISPVHIIPMFPS4.5
Decrease
NNPSNNQJOMFOHUI
/FHBUJWFPS1PTJUJWFFOBCMF
Dimensions
in inches
Designing multiple footprints maximizes

product availability (supply) and creates
greatest cost/price leverage
Universal Footprint
Package leverage to support
power budget variances.
Eighth-Brick Special Features

*OEVTUSZMFBEJOHFJHIUICSJDLTUBOEBSEQBDLBHFBOEGFBUVSFTFUT
4DBMBCMFPVUQVUQPXFSPGGFSJOH-PXQPXFS8TFSJFTPSVQUP
120 W high power series
.FDIBOJDBMPQUJPOTGPSPQUJNVNNPVOUJOHGMFYJCJMJUZ
Open-frame (ALO or LES) or baseplate (AEO) construction;
LES B-Series Through-hole (default) or surface mount (suffix “-S”) termination;
5 mm (default) or 3.7 mm through-hole pin length option
AEO40Y48 .FFUTCBTJDJOTVMBUJPO
1PXFSEFOTJUJFTBTIJHIBT8QFSDVCJDJODI
LES A-Series 8JEFPQFSBUJOHUFNQFSBUVSFSBOHF

1.0 V Open-frame
25 A 48 V (36-75 V) 2.3” x 0.9” x 0.36” (58.42 x 22.86 x 9.14) 85% LES25B48-1V0REJ
1.2 V Open-frame
50 A 48 V (36-75 V) 2.3” x 0.9” x 0.34” (58.42 x 22.86 x 8.64) 86% LES50A48-1V2REJ
Baseplate
25 A 48 V (36-75 V) 2.3” x 0.9” x 0.4” (58.42 x 22.86 x 10.16) 85% AEO25K48N-L
40 A 48 V (36-75 V) 2.3” x 0.9” x 0.4” (58.42 x 22.86 x 10.16) 86% AEO40K48N-L
1.5 V Open-frame
40 A 48 V (36-75 V) 2.3” x 0.9” x 0.32” (58.42 x 22.86 x 8.13) 88% ALO40M48N-L
Baseplate
25 A 48 V (36-75 V) 2.3” x 0.9” x 0.4” (58.42 x 22.86 x 10.16) 86% AEO25M48N-L
40 A 48 V (36-75 V) 2.3” x 0.9” x 0.4” (58.42 x 22.86 x 10.16) 88% AEO40M48N-L
1.8 V Open-frame
40 A 48 V (36-75 V) 2.3” x 0.9” x 0.32” (58.42 x 22.86 x 8.13) 90% ALO40Y48N-L
Baseplate
25 A 48 V (36-75 V) 2.3” x 0.9” x 0.4” (58.42 x 22.86 x 10.16) 87% AEO25Y48N-L
40 A 48 V (36-75 V) 2.3” x 0.9” x 0.4” (58.42 x 22.86 x 10.16) 90% AEO40Y48N-L
2.5 V Open-frame
22 A 48 V (36-75 V) 2.3” x 0.9” x 0.36” (58.42” x 22.86 x 9.14) 91% LES22B48-2V5REJ
40 A 48 V (36-75 V) 2.3” x 0.9” x 0.34” (58.42” x 22.86 x 8.64) 91% LES40 A48-2V5REJ
Baseplate
20 A 48 V (36-75 V) 2.3” x 0.9” x 0.4” (58.42 x 22.86 x 10.16) 90% "&0(/-
35 A 48 V (36-75 V) 2.3” x 0.9” x 0.4” (58.42 x 22.86 x 10.16) 90% "&0(/-
3.3 V Open-frame
20 A 24 V/48 V (19-60 V) 2.3” x 0.9” x 0.32” (58.42 x 22.86 x 8.13) 91% ALO20F36N-L
30 A 48 V (36-75 V) 2.3” x 0.9” x 0.32” (58.42 x 22.86 x 8.13) 91% ALO30F48N-L
Baseplate
20 A 48 V (36-75 V) 2.3” x 0.9” x 0.4” (58.42 x 22.86 x 10.16) 91% AEO20F48N-L
30 A 48 V (36-75 V) 2.3” x 0.9” x 0.4” (58.42 x 22.86 x 10.16) 91% AEO30F48N-L
5V Open-frame
20 A 48 V (36-75 V) 2.3” x 0.9” x 0.32” (58.42 x 22.86 x 8.13) 93% ALO20A48N-L
Baseplate
12 A 48 V (36-75 V) 2.3” x 0.9” x 0.4” (58.42 x 22.86 x 10.16) 93% AEO12A48N-L
20 A 48 V (36-75 V) 2.3” x 0.9” x 0.4” (58.42 x 22.86 x 10.16) 92% AEO20A48N-L
12 V Open-frame
6.7 A 48 V (36-75 V) 2.3” x 0.9” x 0.36” (58.42 x 22.86 x 9.14) 93% LES06B48-12V0REJ
10 A 48 V (36-75 V) 2.3” x 0.9” x 0.32” (58.42 x 22.86 x 8.13) 92% ALO10B48N-L
Baseplate
4A 48 V (36-75 V) 2.3” x 0.9” x 0.4” (58.42 x 22.86 x 10.16) 93% AEO04B48N-L
10 A 48 V (36-75 V) 2.3” x 0.9” x 0.4” (58.42 x 22.86 x 10.16) 92% AEO10B48N-L
15 V Open-frame
5A 24 V (18-36 V) 2.3” x 0.9” x 0.4” (58.42 x 22.86 x 10.16) 91% LES05B24-15V0J
Quarter-Brick
Special Features
ALQ20B48N *OEVTUSZMFBEJOHRVBSUFSCSJDLTUBOEBSEQBDLBHFBOE
feature sets
6QUP"PGGFSJOH
8JEFPQFSBUJOHUFNQFSBUVSFSBOHF
.FFUTCBTJDJOTVMBUJPO
&YDFQUJPOBMEZOBNJDSFTQPOTFBOESFBDUJWFMPBEJOH
capability
.POPUPOJDTUBSUVQDIBSBDUFSJTUJD
LQS
1.2 V Open-frame
50 A 48 V (36-75 V) 2.3” x 1.45” x 0.34” (58.42 x 36.83 x 8.64) 89% LQS50A48-1V2REJ
1.5 V Open-frame
1.8 V Open-frame
Baseplate
75 A 48 V (36-75 V) 2.3” x 1.48” x 0.44” (58.42 x 37.59 x 11.18) 89% AEQ75Y48N-3L
2.5 V Open-frame
3.3 V Open-frame
5V Open-frame
12 V Open-frame
20 A 48 V (36-75 V) 2.3” x 1.45” x 0.36” (58.42 x 36.83 x 9.14) 93% ALQ20B48N-L
Baseplate
20 A 48 V (36-75 V) 2.3” x 1.45” x 0.42” (58.42 x 36.83 x 10.67) 93% AEQ20B48N-L
Quarter-Brick Dual
Special Features
*OEVTUSZMFBEJOHRVBSUFSCSJDLTUBOEBSEQBDLBHFBOE
feature sets
*OEFQFOEFOUDPOUSPMMPPQFMJNJOBUFTDSPTTSFHVMBUJPO
5JHIUMZSFHVMBUFEJOEJWJEVBMPVUQVUDIBOOFMT
$MFBO GBTUUSBOTJFOUMPBESFTQPOTF
LQD25
LQD40 *OUFSOBUJPOBMTBGFUZTUBOEBSETBQQSPWBMT¯6- $4" 5f7
3.3 V/1.2 V Open-frame

15/15 A 48 V (36-75 V) 2.3" x 1.45" x 0.34" (58.42 x 36.83 x 8.64) 90% LQD30A48-3V31V2REJ
Baseplate
12/16 A 48 V (36-75 V) 2.3" x 1.5" x 0.5" (58.42 x 38.10 x 12.7) 91% EXQ60-48D3V3-2V5RJ
5 V/3.3 V Open-frame
Half-Brick Special Features

*OEVTUSZTUBOEBSEIBMGCSJDLBWBJMBCMFVQUP"
0QFOGSBNFBOECBTFQMBUFDPOTUSVDUJPO
0QFOGSBNFIBTIFBUTJOLBEBQUFSGPSDPOEVDUJWFDPPMJOHBQQMJDBUJPOT
)JHIFTUFGGJDJFODJFTBWBJMBCMF
EXB250 AEH80 0QUJNVNUSBOTJFOUMPBEQFSGPSNBODFBOESFBDUJWFMPBEJOHDBQBDJUZ
1.2 V Open-frame
60 A 48 V (36-75 V) 2.4” x 2.3” x 0.42” (60.96 x 58.42 x 10.67) 86% ALH60K48N-L
80 A 48 V (36-75 V) 2.4” x 2.3” x 0.42” (60.96 x 58.42 x 10.67) 83% ALH80K48N-3L
Baseplate
60 A 48 V (33-75 V) 2.4” x 2.28” x 0.5” (60.96 x 57.91 x 12.7) 85% EXB250-48S1V2-RJ
80 A 48 V (36-75 V) 2.4” x 2.3” x 0.5” (60.96 x 58.42 x 12.7) 83% AEH80K48N-3L
1.5 V Open-frame
80 A 48 V (36-75 V) 2.3” x 2.4” x 0.4” (58.42 x 60.96 x 10.16) 86% ALH80M48N-3L
Baseplate
60 A 48 V (33-75 V) 2.4” x 2.28” x 0.5” (60.89 x 57.91 x 12.7) 86% EXB250-48S1V5-RJ
80 A 48 V (36-75 V) 2.3” x 2.4” x 0.5” (58.42 x 60.96 x 12.7) 86% AEH80M48N-3L
1.8 V Open-frame
60 A 48 V (36-75 V) 2.4” x 2.3” x 0.42” (60.96 x 58.42 x 10.67) 89% ALH60Y48N-L
60 A 48 V (36-75 V) 2.4” x 2.3” x 0.42” (60.96 x 58.42 x 10.67) 87% ALH80Y48N-3L
Baseplate
60 A 48 V (33-75 V) 2.4” x 2.28” x 0.5” (60.96 x 57.91 x 12.7) 87% EXB250-48S1V8-R
80 A 48 V (36-75 V) 2.4” x 2.3” x 0.5” (60.96 x 58.42 x 12.7) 87% AEH80Y48N-3L
2.5 V Open-frame
60 A 48 V (36-75 V) 2.4” x 2.3” x 0.42” (60.96 x 58.42 x 10.67) 90% "-)(/-
Baseplate
60 A 48 V (33-75 V) 2.4” x 2.28” x 0.5” (60.96 x 57.91 x 12.7) 88% EXB250-48S2V5-RJ
3.3 V Open-frame
8A 48 V (36-75 V) 2.4” x 2.28” x 0.43” (60.96 x 57.91 x 10.92) 90% EXB30-48S3V3J
10 A 48 V (36-75 V) 2.4” x 2.28” x 0.43” (60.96 x 57.91 x 10.92) 90% EXB50-48S3V3J
30 A 48 V (36-75 V) 2.4” x 2.28” x 0.39” (60.96 X 57.91 X 9.91) 91% EXB100-48S3V3-RJ
60 A 48 V (36-75 V) 2.4” x 2.3” x 0.42” (60.96 x 58.42 x 10.67) 91% ALH60F48N-L
Baseplate
30 A 24 V (18-36 V) 2.4” x 2.3” x 0.5” (60.96 x 57.91 x 12.7) 77% BXB150-24S3V3FLTJ
50 A 48 V (33-75 V) 2.4” x 2.3” x 0.5” (60.96 x 57.91 x 12.7) 90% EXB250-48S3V3-RJ
60 A 48 V (36-75 V) 2.4” x 2.3” x 0.5” (60.96 x 58.42 x 12.7) 91% AEH60F48N-L
5V Open-frame
10 A 48 V (36-75 V) 2.4” x 2.28” x 0.43” (60.96 x 57.91 x 10.92) 91% EXB50-48S05-RJ
20 A 48 V (36-75 V) 2.4” x 2.28” x 0.39” (60.96 x 57.91 x 9.91) 92% EXB100-48S05-RJ
Baseplate
33 A 48 V (33-75 V) 2.4” x 2.28” x 0.5” (60.96 x 57.91 x 12.7) 92% EXB250-48S05-RJ
12 V Open-frame
2.5 A 48 V (36-75 V) 2.4” x 2.28” x 0.43” (60.96 x 57.91 x 10.92) 90% EXB30-48S12J
4.2 A 48 V (36-75 V) 2.4” x 2.28” x 0.43” (60.96 x 57.91 x 10.92) 90% EXB50-48S12J
Baseplate
8.33 A 24 V (18-36 V) 2.4” x 2.28” x 0.5” (60.96 x 57.91 x 12.7) 85% BXB100-24S12FLTJ
13.75 A 48 V (33-75 V) 2.4” x 2.28” x 0.5” (60.96 x 57.91 x 12.7) 92% EXB250-48S12-RJ
25 A 48 V (36-75 V) 2.4” x 2.30” x 0.5” (60.96 x 58.42 x 12.7) 94% AEH25B48N-CL
29.17 A 48 V (36-75 V) 2.4” x 2.30” x 0.5” (60.96 x 58.42 x 12.7) 94% AEH30B48N-L
15 V Baseplate
8.33 A 24 V (18-36 V) 2.4” x 2.28” x 0.5” (60.96 x 57.91 x 12.7) 83% BXB50-24S15FLTJ
52 V Baseplate
7.55 A 48 V (38-60 V) 2.4” x 2.28” x 0.5” (60.96 x 57.91 x 12.7) 93% AEH08U48N-L
Half-Brick Dual
EXB30
Current Input Voltage Package L x W x H (mm) Efficiency Model Number
1.8/3.3 V Open-frame
8.5/8.5 A 48 V (36-75 V) 2.4” x 2.28” x 0.39” (60.96 x 57.91 x 9.91) 86% EXB50-48D3V3-1V8J
3.3/5 V Open-frame
6/6 A 24 V (18-36 V) 2.4” x 2.28” x 0.5” (60.96 x 57.91 x 12.7) 87% EXB30-24D05-3V3J
6/6 A 48 V (36-75 V) 2.4” x 2.28” x 0.5” (60.96 x 57.91 x 12.) 88% EXB30-48D05-3V3J
7.5/7.5 A 48 V (36-75 V) 2.4” x 2.28” x 0.39” (60.96 x 57.91 x 9.91) 89% EXB50-48D05-3V3-RJ
RF Power Bricks Special Features

4QFDJBMJ[FEIJHIQPXFSCSJDLTGPS3'BQQMJDBUJPOTTVDIBT
base station power amplifiers
0GGFSFEJO7BOE7JOQVUWPMUBHFT
8JEFPVUQVUWPMUBHFBEKVTUBCJMJUZ
°C to 100 °C baseplate temperature with no derating
at rated power
RFF700 RFB300
*OUFSOBUJPOBMTBGFUZTUBOEBSEBQQSPWBMT¯6- $4" 7%&
CB Report
Half-Brick
7.2-13.2 V Baseplate
25 A 24 V (18-36 V) 2.4” x 2.27” x 0.5” (60.96 x 57.66 x 12.7) 86% RFB300-24S12-R5Y
29.2 A 48 V (36-75 V) 2.4” x 2.27” x 0.5” (60.96 x 57.66 x 12.7) 86% RFB350-48S12-R5J
11 A 24 V (18-36 V) 2.4” x 2.27” x 0.5” (60.96 x 57.66 x 12.7) 90% RFB300-24S28-R5Y
11 A 48 V (36-75 V) 2.4” x 2.27” x 0.5” (60.96 x 57.66 x 12.7) 91% RFB300-48S28-R5J
12.5 A 48 V (36-75 V) 2.4” x 2.27” x 0.5” (60.96 x 57.66 x 12.7) 91% RFB350-48S28-R5Y
Full-Brick
17.9 A 24 V (18-36 V) 4.6” x 2.4” x 0.5” (116.84 x 60.96 x 12.7) 90% RFF500-24S28-5Y
17.9 A 48 V (36-75 V) 4.6” x 2.4” x 0.5” (116.84 x 60.96 x 12.7) 91% RFF500-48S28-5Y
21.4 A 24 V (18-36 V) 4.6” x 2.4” x 0.5” (116.84 x 60.96 x 12.7) 90% RFF600-24S28-5Y
21.4 A 48 V (36-75 V) 4.6” x 2.4” x 0.5” (116.84 x 60.96 x 12.7) 91% RFF600-48S28-5Y
25 A 48 V (36-75 V) 4.6” x 2.4” x 0.5” (116.84 x 60.96 x 12.7) 91% RFF700-48S28-5Y
Bus Converters
Special Features
*OEVTUSZTUBOEBSEGPPUQSJOUT
$UP$DBTF CBTFQMBUF
IBC25 $UP$BNCJFOU PQFOGSBNF
IBC60 3JDIGFBUVSFTFUTPWFSWPMUBHF PWFS

temperature protection, on/off enable
.FFUTCBTJDJOTVMBUJPO
8JEFPSOBSSPXJOQVUWPMUBHFSBOHF PQFO
AED17Q50
loop or semi-regulated output for telecom and
enterprise applications
ALD17Q50 *OUFSOBUJPOBMTBGFUZTUBOEBSEBQQSPWBMT¯6-
CSA, VDE, CB Report
Sixteenth-Brick
9.6 V Open-frame
17 A 48 V (38-55 V) 1.3" x 0.9" x 0.35" (33.02 x 22.86 x 8.89) 96% ALD17Q50N-L
17 A 48 V (38-60 V) 1.3" x 0.9" x 0.35" (33.02 x 22.86 x 8.89) 95% ALD17Q60N-L
Baseplate
17 A 48 V (38-55 V) 1.4" x 0.9" x 0.35" (35.56 x 22.86 x 8.89) 96% AED17Q50N-L
12 V Open-frame
13 A 48 V (38-60 V) 1.3" x 0.9" x 0.35" (33.02 x 22.86 x 8.89) 96% ALD13B50N-L
Baseplate
13 A 48 V (38-60 V) 1.4" x 0.9" x 0.35" (35.56 x 22.86 x 8.89) 96% AED13B50N-L
Eighth-Brick
9.6 V Open-frame
32 A 48 V (38-55 V) 2.3” x 0.9” x 0.48” (58.42 x 22.86 x 12.19) 97% IBC32AEN4896-REJ
12 V Open-frame
17 A 48 V (36-75 V) 2.3” x 0.9” x 0.45” (58.42 x 22.86 x 11.43) 94% IBC17AEW4812-REJ
20 A 48 V (42-53 V) 2.3” x 0.9” x 0.45” (58.42 x 22.86 x 11.43) 95% IBC20AES4812-REJ
25 A 48 V (42-53 V) 2.3” x 0.9” x 0.45” (58.42 x 22.86 x 11.43) 96% IBC25AET4812-REJ
Quarter-Brick
9.6 V Open-frame
60 A 48 V (38-55 V) 2.3” x 1.45” x 0.48” (58.42 x 36.83 x 12.19) 97% IBC60AQN4896-REJ
12 V Open-frame
28 A 48 V (36-75 V) 2.3” x 1.45” x 0.45” (58.42 x 36.83 x 11.43) 95% IBC28AQW4812-REJ
30 A 48 V (42-53 V) 2.3” x 1.45” x 0.45” (58.42 x 36.83 x 11.43) 95% IBC30AQS4812-REJ
37.5 A 48 V (42-53 V) 2.3” x 1.45” x 0.45” (58.42 x 36.83 x 11.43) 96% IBC38AQT4812-REJ
42 A 48 V (36-55 V) 2.3” x 1.48” x 0.45” (58.42 x 36.59 x 11.43) 97% ALQ42B50N-L
Baseplate
42 A 48 V (36-55 V) 2.3” x 1.48” x 0.52” (58.42 x 36.59 x 13.21) 97% AEQ42B50N-L
C-Class — Economy
The 1st generation C-Class non-isolated DC—DC converters are designed to provide good efficiency
and performance.
SIL20C SMT30C SMT40C SMT06C
Special Features
*OQVUWPMUBHFSBOHFT7PS7 0QFSBUJOHUFNQFSBUVSFSBOHFGPS4*-$BOE4*-$
8JEFPVUQVUWPMUBHFUSJNBEKVTUBCJMJUZUP7ED $UP$
0VUQVUDVSSFOU" 1SPUFDUJPOPWFSDVSSFOUTIPSUDJSDVJU
)JHIFGGJDJFODZVQUP $PTUPQUJNJ[FEEFTJHO¯JOEVTUSZMFBEJOHWBMVF
3FNPUFPOPGG $PNQBDUGPPUQSJOU WFSUJDBM IPSJ[POUBMBOEIPSJ[POUBM
SMT options
1PXFSHPPE
*OUFSOBUJPOBMTBGFUZTUBOEBSEBQQSPWBMT¯6- $4" 5f7
1BSBMMFMPQFSBUJPODVSSFOUTIBSF 4*-$BOE4*-$
CB Report
3FNPUFTFOTF 4*-$BOE4*-$
&YDFMMFOUUSBOTJFOUSFTQPOTF
(FOFSBM1VSQPTF$$MBTT/PO*TPMBUFE%$¯%$$POWFSUFST
Output Current Input Voltage Output Voltage Efficiency Package L x W x H (mm) Model Number
Single-In-Line, Through-hole Mounting
6A 4.5-5.5 Vdc 0.9-3.3 V 89% 1.2” x 0.45” x 0.61” (30.48 x 11.43 x 15.49) SIL06C-05SADJ-VJ
6A 10.2-13.8 Vdc 0.9-5.0 V 91% 1.2” x 0.45” x 0.61” (30.48 x 11.43 x 15.49) SIL06C-12SADJ-VJ
15 A 4.5-5.5 Vdc 0.9-3.3 V 89% 1.2” x 0.4” x 1.1” (30.48 x 10.16 x 27.94) SIL15C-05SADJ-VJ
25 A 10.2-13.8 Vdc -4.5-(-5.5 V) 90% 2.4” x 0.52” x 1.25” (60.96 x 13.21 x 31.75) 4*-$4/&(7J
Surface-Mounting
6A 4.5-5.5 Vdc 0.9-3.3 V 89% 1.2” x 0.53” x 0.47” (30.48 x 13.46 x 11.94) SMT06C-05SADJJ
6A 10.2-13.8 Vdc 0.9-5.0 V 91% 1.2” x 0.53” x 0.47” (30.48 x 13.46 x 11.94) SMT06C-12SADJJ
15 A 4.5-5.5 Vdc 0.9-3.3 V 89% 1.2” x 1.1” x 0.46” (30.48 x 27.94 x 11.68) SMT15C-05SADJJ
C-Class — High Density

The 2nd generation C-Class non-isolated DC—DC converters are designed to provide good efficiency and
performance, a smaller footprint, and integrated input and output capacitors.
LDO03C LDO06C SIL40C2
Special Features
8JEFJOQVUWPMUBHFSBOHFT7PS7 0QFSBUJOHUFNQFSBUVSFSBOHFGPS-%0 -%0BOE-%0
8JEFPVUQVUWPMUBHFUSJNBEKVTUBCJMJUZ7 $UP$
0VUQVUDVSSFOU" 0QFSBUJOHUFNQFSBUVSFSBOHF$UP$
)JHIFGGJDJFODZVQUP 1SPUFDUJPOPWFSDVSSFOUTIPSUDJSDVJU
3FNPUFPOPGG /PBEEFEJOQVUPSPVUQVUDBQBDJUPSTOFFEFEGPSSJQQMFDVSSFOU
capability or stability
1PXFSHPPE
$PTUPQUJNJ[FEEFTJHO¯JOEVTUSZMFBEJOHWBMVF
3FNPUFTFOTF 4YY$BOE4YY$
$PNQBDUGPPUQSJOU WFSUJDBM IPSJ[POUBMBOEIPSJ[POUBM4.5PQUJPOT

&YDFMMFOUUSBOTJFOUSFTQPOTF
*OUFSOBUJPOBMTBGFUZTUBOEBSEBQQSPWBMT¯6- $4" 5f7$#3FQPSU
$VSSFOUTJOLDBQBCJMJUZGPSUFSNJOBUJPOBQQMJDBUJPOT
(FOFSBM1VSQPTF$$MBTT/PO*TPMBUFE%$¯%$$POWFSUFST
3A 3.0-13.8 Vdc 0.59-5.1 V 90% 0.37” x 0.21” x 0.61” (9.4 x 5.33 x 15.49) LDO03C-005W05-VJ
6A 3.0-13.8 Vdc 0.59-5.1 V 92% 0.41” x 0.37” x 0.65” (10.41 x 9.4 x 16.51) LDO06C-005W05-VJ
10 A 3.0-13.8 Vdc 0.59-5.1 V 94% 0.41” x 0.45” x 0.65” (10.41 x 11.43 x 16.51) LDO10C-005W05-VJ
20 A 4.5-13.8 Vdc 0.59-5.1 V 93% 1.2” x 0.46” x 0.61” (30.48 x 11.68 x 15.49) SIL20C2-00SADJ-VJ
40 A 4.5-13.8 Vdc 0.6-5.0 V 94% 1.2” x 0.43” x 1.1” (30.48 x 10.92 x 27.94) SIL40C2-00SADJ-VJ
Surface-Mounting
3A 3.0-13.8 Vdc 0.59-5.1 V 90% 0.61” x 0.37” x 0.29” (15.49 x 9.4 x 7.37) LDO03C-005W05-SJ
6A 3.0-13.8 Vdc 0.59-5.1 V 92% 0.65” x 0.41” x 0.44” (16.51 x 10.41 x 11.18) LDO06C-005W05-SJ
10 A 3.0-13.8 Vdc 0.59-5.1 V 94% 0.65” x 0.41” x 0.52” (16.51 x 10.41 x 13.21) LDO10C-005W05-SJ
20 A 4.5-13.8 Vdc 0.59-5.1 V 93% 1.2” x 0.61” x 0.48” (30.48 x 15.49 x 12.19) SMT20C2-00SADJJ
40 A 4.5-13.8 Vdc 0.6-5.0 V 94% 1.2” x 1.1” x 0.44” (30.48 x 27.94 x 11.18) SMT40C2-00SADJJ
C-Class — High Density LGA C Series

The latest addition to the C-Class non-isolated DC-DC converter offering packaged in an ultra-compact,
low-profile Land Grid Array with current densities up to 225 A/in3.
-("$ -("$
-("$ -("$
Special Features
)JHIEFOTJUZ VMUSBMPXQSPGJMFTVSGBDFNPVOUNPEVMFJO-BOE(SJE *OQVU67-03FNPUF0O0GG0VUQVU"EKVTU.BSHJO1(PPETJHOBM
"SSBZ -("
QBDLBHF Differential sense
"WBJMBCMFJOEJGGFSFOUPVUQVUDVSSFOUMFWFMT BOE"NQT $VSSFOUTJOLDBQBCJMJUZGPSWPMUBHFUFSNJOBUJPOBQQMJDBUJPOT
8JEFJOQVUWPMUBHFSBOHF7 *OUFHSBUFEJOQVUBOEPVUQVUDBQBDJUPSTSFTVMUJOHUPNJOJNBMFYUFSOBM
"EKVTUBCMFPVUQVUWPMUBHF7WJBFYUFSOBMSFTJTUPS capacitance required for stable operation
)JHIFGGJDJFODZ~92% typical
8JEFBNCJFOUPQFSBUJOHUFNQFSBUVSFSBOHF$UP$
-("$4FSJFT/PO*TPMBUFE%$¯%$$POWFSUFST
Surface-Mounting
3A 3.0-14 Vdc 0.59-5.1 V 92% 0.65” x 0.65” x 0.129” (16.51 x 16.51 x 3.27) -("$4"%JJ
6A 3.0-14 Vdc 0.59-5.1 V 92% 0.65” x 0.65” x 0.129” (16.51 x 16.51 x 3.27) -("$4"%JJ
10 A 3.0-14 Vdc 0.59-5.1 V 92% 0.65” x 0.65” x 0.129” (16.51 x 16.51 x 3.27) -("$4"%JJ
20 A 4.5-14 Vdc 0.59-5.1 V 91% 0.65” x 0.65” x 0.210” (16.51 x 16.51 x 5.33) -("$4"%JJ
/PUF0QUJPOBMIFBUTJOLLJUTBSFBWBJMBCMF0SEFSJOHQBSUOVNCFSJT-(")54,,*5999
9995PUBMIFJHIUPGUIF-("$4"%JJ with heatsink attached: 045 = 0.45”; 048 = 0.48”; 050 = 0.50”
A Paradigm Shift in Converter Packaging

$PNQBDU-("QBDLBHFTJHOJGJDBOUJNQSPWFNFOUJODVSSFOUEFOTJUZ 'VMMZPQFSBUJPOBM%$%$TPMVUJPOXJUI
saves board space external components
"MMPXTGPSCJMBUFSBMUIFSNBMNBOBHFNFOUOPUFBTJMZQSPWJEFECZ±EPXO²
solutions or typical modules (e.g., uniform height for coldplate cooling
4DBMBCMFTPMVUJPO POFGPPUQSJOUEFTJHOGPS BOE"PGGFSJOH
E-Class — Performance
Efficiencies as high as 96% and current densities up to 140 A/in3.
SIL05E APA18
Special Features
Efficiencies as high as 96% and current densities up to 140 A/in3. 0QFSBUJOHUFNQFSBUVSFSBOHF$UP$
*OQVUWPMUBHFSBOHFT7 7 7 7 #VJMUJO*2C bus interface feature for precision setting of both output
8JEFPVUQVUWPMUBHFUSJNSBOHFT7BOE7 voltage and voltage margining product series (SIL15E-12M)
0VUQVUDVSSFOU" 1SPUFDUJPOPWFSDVSSFOUTIPSUDJSDVJU
3FNPUFPOPGG *OUFSOBUJPOBMTBGFUZTUBOEBSEBQQSPWBMT¯6- $4" 5f7$#3FQPSU
3FNPUFTFOTF
*OEVTUSZTUBOEBSEGPPUQSJOU¯WFSUJDBMBOEIPSJ[POUBMNPVOUJOH
MPXQSPGJMF4.54*1¯UISPVHIIPMF
(FOFSBM1VSQPTF&$MBTT/PO*TPMBUFE%$¯%$$POWFSUFST
5A 3.0-5.5 Vdc 0.75-3.63 V 94% 0.9” x 0.28” x 0.4” (22.86 x 7.11 x 10.16) SIL05E-05W3V3-VJ
10 A 4.5-5.5 Vdc 0.8-3.63 V 95% 2” x 0.31” x 0.5” (50.8 x 7.87 x 12.7) SIL10E-05W3V3-VJ
10 A 10-14 Vdc 0.8-3.63 V 94% 2” x 0.31” x 0.5” (50.8 x 7.87 x 12.7) SIL10E-12W3V3-VJ
15 A 3.0-5.5 Vdc 0.8-3.63 V 94% 2” x 0.31” x 0.5” (50.8 x 7.87 x 12.7) SIL15E-05W3V3-VJ
15 A 10-14 Vdc 0.8-3.63 V 94% 2” x 0.31” x 0.5” (50.8 x 7.87 x 12.7) SIL15E-12W3V3-VJ
18 A 3.0-5.5 Vdc 0.75-3.6 V 92% 2” x 0.39” x 0.5” (50.8 x 9.91 x 12.7) APA18T04-9L
18 A 10-14 Vdc 0.75-3.6 V 92% 2” x 0.39” x 0.5” (50.8 x 9.91 x 12.7) APA18T12-9L
30 A 8.0-14 Vdc 0.8-3.63 V 93% 2” x 0.31” x 0.5” (50.8 x 7.87 x 12.7) SIL30E-12W3V3-VJ
Surface-Mounting
5A 3.0-5.5 Vdc 0.75-3.63 V 94% 0.8” x 0.45” x 0.26” (20.32 x 11.43 x 6.6) SMT05E-05W3V3J
5A 10-14 Vdc 0.8-3.63 V 91% 0.8” x 0.45” x 0.24” (20.32 x 11.43 x 6.1) SMT05E-12W3V3J
10 A 3.0-5.5 Vdc 0.8-3.63 V 96% 1.3” x 0.53” x 0.32” (33.02 x 13.46 x 8.13) SMT10E-05W3V3J
10 A 10-14 Vdc 0.8-3.63 V 94% 1.3” x 0.53” x 0.32” (33.02 x 13.46 x 8.13) SMT10E-12W3V3J
15 A 3.0-5.5 Vdc 0.8-3.63 V 95% 1.3” x 0.53” x 0.32” (33.02 x 13.46 x 8.13) SMT15E-05W3V3J
15 A 10-14 Vdc 0.8-3.63 V 94% 1.3” x 0.53” x 0.32” (33.02 x 13.46 x 8.13) SMT15E-12W3V3J
18 A 3.0-5.5 Vdc 0.75-3.63 V 92% 1.3” x 0.53” x 0.34 (33.02 x 13.46 x 8.64) APC18T04-9L
18 A 10-14 Vdc 0.75-5.5 V 92% 1.3” x 0.53” x 0.34 (33.02 x 13.46 x 8.64) APC18T12-9L
30 A 8.0-14 Vdc 0.8-3.63 V 91% 1.3” x 0.53” x 0.32” (33.02 x 13.46 x 8.13) SMT30E-12W3V3J
F-Class — Fast Transient Response

Highly integrated non-isolated DC—DC modules, combining transient response up to 300 A/µs.
Expressly designed to minimize the number of external capacitors needed.
SMT12F SMT15F
Special Features
*OQVUWPMUBHFSBOHFT7ED 7ED *OEVTUSZTUBOEBSETVSGBDFNPVOUGPPUQSJOU 4.5'
8JEFPVUQVUWPMUBHFUSJNSBOHF7 4.5'
$VSSFOUEFOTJUJFTJOFYDFTTPG"JO3
0VUQVUDVSSFOU" 0QFSBUJOHUFNQFSBUVSFSBOHF$UP$
)JHIFGGJDJFODZ!7JO7EDPVUQVUGVMMMPBE 1SPUFDUJPOPWFSDVSSFOUTIPSUDJSDVJU OPOMBUDIJOH
BOE
3FNPUFPOPGG overtemperature
%JGGFSFOUJBMSFNPUFTFOTF *OUFSOBUJPOBMTBGFUZTUBOEBSEBQQSPWBMT¯6- $4" 5f7$#3FQPSU
1PXFSHPPE
4FQBSBUFEJHJUBMJOQVUTGPSBOE¯PVUQVUWPMUBHFNBSHJOJOH
(FOFSBM1VSQPTF'$MBTT/PO*TPMBUFE%$¯%$$POWFSUFST
Surface-Mounting
12 A 3-5.5 Vdc 0.9-3.3 V 95% 0.63” x 0.52” x 0.31” (16 x 13.21 x 7.87) SMT12F-05W3V3J
15 A 10.8-13.2 Vdc 1.0 V 85% 1.3” x 0.53” x 0.3” (33.02 x 13.46 x 7.62) SMT15F-12S1V0J
POLA-DDR/Memory
Choose POLA modules for multi-sourced and interoperable parts.
PTH12060Y PTH12010Y PTH05050Y
Special Features
*OQVUWPMUBHFSBOHFT7 7 7 3FNPUFTFOTF
8JEF755PVUQVUWPMUBHFUSJNBEKVTUBCJMJUZ7 6OEFSWPMUBHFMPDLPVU
0VUQVUDVSSFOU" 10-"DPNQBUJCMF
)JHIFGGJDJFODZVQUP 5SVFNVMUJTPVSDJOHGMFYJCJMJUZ GPSN GJUBOEGVODUJPO

755CVTUFSNJOBUJPOPVUQVU PVUQVUUIFTZTUFN73&'
0QFSBUJOHUFNQFSBUVSFSBOHF$UP$
$VSSFOUTJOLDBQBCJMJUZGPSUFSNJOBUJPOBQQMJDBUJPOT 1SPUFDUJPOPWFSDVSSFOUTIPSUDJSDVJU
%%3BOE2%3DPNQBUJCMF 5ISPVHIIPMFPSTVSGBDFNPVOU
1SFCJBTTUBSUVQDBQBCJMJUZ *OUFSOBUJPOBMTBGFUZTUBOEBSEBQQSPWBMT¯6- $4" 5f7$#3FQPSU
3FNPUFPOPGG
POLA Non-Isolated DDR/QDR Memory Bus Termination Modules

Output Current Input Voltage Output Voltage Efficiency Package L x W x H (mm) Model Number *
6A 2.95-3.65 Vdc 0.55-1.8 V 88% 0.87” x 0.495” x 0.335” (22.01 x 12.57 x 8.51) PTH03050YAD
10 A 2.95-3.65 Vdc 0.55-1.8 V 86% 0.995” x 0.620” x 0.354” (25.27 x 15.75 x 8.99) PTH03060YAD
*Mounting Option Suffix:

D Horizontal through-hole (RoHS 6/6) S Surface-mount solder ball (RoHS 5/6)
H Horizontal through-hole (RoHS 5/6) Z Surface-mount solder ball (RoHS 6/6)
POLA — General Purpose

Choose POLA modules for multi-sourced and interoperable parts.
Special Features
*OQVUWPMUBHFSBOHFT7 10-"DPNQBUJCMF
4.5-5.5 V, 10.8-13.2 V 5SVFNVMUJTPVSDJOHGMFYJCJMJUZ
8JEFPVUQVUWPMUBHFUSJNBOE (form, fit and function)
PTH04040WAH adjustability: 0.8-5.5 V 0QFSBUJOHUFNQFSBUVSFSBOHF
0VUQVUDVSSFOU" $UP$
)JHIFGGJDJFODZVQUP 1SPUFDUJPOPWFSDVSSFOUTIPSUDJSDVJU
"VUP5SBDL4FRVFODJOH 5ISPVHIIPMFPSTVSGBDFNPVOU
.BSHJOVQEPXODPOUSPMT *OUFSOBUJPOBMTBGFUZTUBOEBSE
1SFCJBTTUBSUVQDBQBCJMJUZ BQQSPWBMT¯6- $4" 5f7
PTH12040WAH PTH04040WAH CB Report
3FNPUFPOPGG
3FNPUFTFOTF
(FOFSBM1VSQPTF10-"/PO*TPMBUFE%$¯%$$POWFSUFST
Output Current Input Voltage Output Voltage Efficiency Package L x W x H (mm) Model Number*
6A 2.95-3.65 Vdc 0.8-2.5 V 94% 0.87” x 0.495” x 0.335” (22.01 x 12.57 x 8.51) PTH03050WAD
6A 10.8-13.2 Vdc 0.8-1.8 V 88% 0.87” x 0.495” x 0.335” (22.01 x 12.57 x 8.51) PTH12050LAD
8A 2.95-3.65 Vdc 0.8-2.5 V 93% 0.9” x 0.33” x 0.4” (22.86 x 8.38 x 10.16) PTV03010WAD
8A 10.8-13.2 Vdc 0.8-1.8 V 87% 0.9” x 0.33” x 0.4” (22.86 x 8.38 x 10.16) PTV12010LAD
10 A 2.95-3.65 Vdc 0.8-2.5 V 93% 0.995” x 0.62” x 0.354” (25.27 x 15.75 x 8.99) PTH03060WAD
10 A 10.8-13.2 Vdc 0.8-1.8 V 88% 0.995” x 0.62” x 0.354” (25.27 x 15.75 x 8.99) PTH12060LAD
16 A 10.8-13.2 Vdc 0.8-1.8 V 87% 1.750” x 0.37” x 0.500” (44.45 x 9.4 x 12.7) PTV12020LAD
16 A 10.8-13.2 Vdc 1.2-5.5 V 93% 1.750” x 0.37” x 0.500” (44.45 x 9.4 x 12.7) PTV12020WAD
50 A 8.0-14 Vdc 0.8-5.5 V 96% 2.045” x 1.045” x 0.357” (51.94 x 26.54 x 9.07) PTH12040WAD
*Mounting Option Suffix:
D Horizontal through-hole (RoHS 6/6) S Surface-mount solder ball (RoHS 5/6)
H Horizontal through-hole (RoHS 5/6) Z Surface-mount solder ball (RoHS 6/6)
DDR Memory Power Module

Designers’ tip: Check out the POLA memory bus termination models on page 57.
Special Features
)JHIDVSSFOUEVBMPVUQVUQPXFSNPEVMF 5SBDLJOHEVBMPVUQVUWPMUBHFT
for DDR memory 3FNPUFPOPGG
*OQVUWPMUBHFSBOHF7 1PXFSHPPE PQFODPMMFDUPS
0VUQVUWPMUBHFBEKVTUBCJMJUZ 6OEFSWPMUBHFMPDLPVU
2.32-2.75 Vddq
1SPUFDUJPOPWFSDVSSFOUTIPSUDJSDVJU
DDR12 4JOHMFDPNQBDUNPEVMFQSPWJEFT"! overvoltage
2.5 V for Vddq supply and 8 A @ 1.25 V for
0QFSBUJOHUFNQFSBUVSFSBOHF$UP$
Vtt termination
*OUFSOBUJPOBMTBGFUZTUBOEBSEBQQSPWBMT¯
7UUPVUQVUIBTTJOLDBQBCJMJUZGPSMPHJD
UL, CSA, TÜV and CB Report
terminations
3FNPUFTFOTF 7EERPVUQVUPOMZ
.FNPSZ1PXFS/PO*TPMBUFE%$¯%$$POWFSUFST
25 A & 8 A 10.8-13.2 Vdc 2.5 V & 1.25 V 84% 3.0” x 0.5” x 1.2” (76.20 x 12.7 x 30.48) DDR12-25D08-AJ
Voltage Regulator Modules (VRM)

Emerson Network Power closely tracks leading semiconductor
manufacturers’ (Intel® and AMD) roadmaps and offer processor
power converters designed specifically to match demands. Special Features
7PMUBHFSFHVMBUPSNPEVMFT 73.T
GPSCPUI*OUFMBOE".%
microprocessors
*OQVUWPMUBHFSBOHFT7 7BOE7
0VUQVUDVSSFOUTVQUP"
0VUQVUWPMUBHFBEKVTUBCJMJUZ
CJUBOECJU7*%JOQVUT
"MMPXTEZOBNJD7*%DPEFDIBOHFT
)JHIFGGJDJFODZVQUP
&YDFQUJPOBMMZGBTUUSBOTJFOUSFTQPOTFJOFYDFTTPG"T
VRM10
3FNPUFPOPGG
%JGGFSFOUJBMSFNPUFTFOTF
-PXQSPGJMFUPNFFU6BQQMJDBUJPOT
$VSSFOUTIBSJOH¯OPOFFEGPSNBTUFSTMBWFDPOGJHVSBUJPOT
VRM64 1SPUFDUJPOPWFSDVSSFOUTIPSUDJSDVJUPWFSWPMUBHF XJUI
on-board fuse)
*OUFSOBUJPOBMTBGFUZTUBOEBSEBQQSPWBMT¯7%&
73.1SPDFTTPS/PO*TPMBUFE%$¯%$$POWFSUFSTVRM Processor Power Non-isolated DC—DC Converters

VRM Specifications Output Current Input Voltage Output Voltage Efficiency Package L x W x H (mm) Model Number
AMD64 80 A 10.8-13.2 Vdc 0.8-1.55 V 84% 3.68” x 0.75 x 1.25” (93.47 x 19.05 x 31.75) VRM64-80-12-UY
VRM10.0, VRM10.1 105 A 11-12.6 Vdc 0.8375-1.60 V 84% 3.68” x 1.00” x 1.25” (93.35 x 25.4 x 31.75) VRM10-105-12-EY
VRM10.0, VRM10.1 80 A 11-12.6 Vdc 0.8375-1.60 V 85% 3.19” x 0.77” x 1.24” (81.03 x 19.78 x 31.75) VRM10-80-12-PY
VRM10.0, VRM10.1 85 A 11-12.6 Vdc 0.8375-1.60 V 85% 3.19” x 0.77” x 1.24” (81.03 x 19.78 x 31.75) VRM10-85-12-UY
High Power
Power Factor Correction (PFC)

AIT02ZPFC
AIF04ZPFC 720W Special Features
1600 W
88 $MPDLTZODI JOPVU
6OJUZQPXFSGBDUPS $VSSFOUNPOJUPSJOH
6OJWFSTBMJOQVUBOEGSFRVFODZ 7PVUBEKVTU
range 0OPGGFOBCMF
1PTJUJWFBOEOFHBUJWFFOBCMF 3FNPUFTFOTF
AIQ00ZPFC 1BSBMMFMJOHXJUIDVSSFOUTIBSF FGGJDJFODZ
75 W
*&$DPNQMJBODF 'BTUUSBOTJFOUSFTQPOTF
$CBTFQMBUF

PFC Module - Baseplate
380 V 4.2 A 85-264 Vac 4.6” x 2.4” x 0.5” (116.84 x 60.96 x 12.7) 95% AIF04ZPFC-01L
380 V 4.2 A 85-264 Vac 4.6” x 2.4” x 0.5” (116.84 x 60.96 x 12.7) 95% AIF04ZPFC-02L
393 V 0.25 A 100-122 Vac 2.3” x 1.45” x 0.5” (57.91 x 36.83 x 12.7) 90% AIQ00ZPFC-01NL
393 V 2.08 A 85-264 Vac 3.5” x 2.4” x 0.5” (88.9 x 60.96 x 12.7) 93% AIT02ZPFC-01NL
High Power 300 Vin

Special Features
7JOQVU 7 &NCFEEFEDPOUSPMTPO
PFC-ready) secondary side (Full- and
OEHFOFSBUJPOQSPEVDU Half-brick):
4UBOEBSEUISPVHIIPMF - Temp monitor
termination - Current sharing
1PXFSEFOTJUZ8JO3 - Power good signal
$NBYCBTFQMBUF - Current limit & OVP adjust
300 V input 65-600 W output
operating temperature

AIF 300 Vin Full-Brick — Baseplate
1.8 V 120 A 300 V (250-420 V) 4.6” x 2.4” x 0.5” (116.84 x 60.96 x 12.7) 80% AIF120Y300-L
3.3 V 120 A 300 V (250-420 V) 4.6” x 2.4” x 0.5” (116.84 x 60.96 x 12.7) 87% AIF120F300-L
5V 80 A 300 V (250-420 V) 4.6” x 2.4” x 0.5” (116.84 x 60.96 x 12.7) 90% AIF80 A300-L
12 V 50 A 300 V (250-420 V) 4.6” x 2.4” x 0.5” (116.84 x 60.96 x 12.7) 90% AIF50B300-L
15 V 40 A 300 V (250-420 V) 4.6” x 2.4” x 0.5” (116.84 x 60.96 x 12.7) 90% AIF40C300-L
24 V 25 A 300 V (250-420 V) 4.6” x 2.4” x 0.5” (116.84 x 60.96 x 12.7) 90% AIF25H300-L
48 V 12 A 300 V (250-420 V) 4.6” x 2.4” x 0.5” (116.84 x 60.96 x 12.7) 91% AIF12W300-L
AIH 300 Vin Half-Brick — Baseplate
1.8 V 50 A 300 V (250-420 V) 2.3” x 2.4” x 0.5” (58.42 x 60.96 x 12.7) 80% AIH50Y300-L
3.3 V 50 A 300 V (250-420 V) 2.3” x 2.4” x 0.5” (58.42 x 60.96 x 12.7) 85% AIH50F300-L
5V 40 A 300 V (250-420 V) 2.3” x 2.4” x 0.5” (58.42 x 60.96 x 12.7) 88% AIH40 A300-L
12 V 20 A 300 V (250-420 V) 2.3” x 2.4” x 0.5” (58.42 x 60.96 x 12.7) 90% AIH20B300-L
15 V 16 A 300 V (250-420 V) 2.3” x 2.4” x 0.5” (58.42 x 60.96 x 12.7) 90% AIH16C300-L
24 V 10 A 300 V (250-420 V) 2.3” x 2.4” x 0.5” (58.42 x 60.96 x 12.7) 90% AIH10H300-L
AIQ 300 Vin Quarter-Brick — Baseplate
28 V 2.32 A 300 V (250-420 V) 2.3” x 1.45” x 0.5” (57.91 x 36.83 x 12.7) 89% AIQ02R300L
High Power
On-board AC—DC Distributed Architecture

)JHIQPXFSBOEIJHIEFOTJUZ"$¯%$CVJMEJOHCMPDLT
for quick-turn and modular power solutions
"MUFSOBUJWFQPXFSTPMVUJPOTWTDVTUPNEFWFMPQNFOUBQQSPBDI
/PGBOTBOEIJHISFMJBCJMJUZ .IPVST.5#'
4VJUBCMFGPSIBSTIUFNQFSBUVSFDPOEJUJPOT
$TUBSUVQ$UP$PQFSBUJOHUFNQFSBUVSF
Output
voltages
Full Brick Half Brick powering up
the load
Output Current: up to 120 A

48 V
AIH 24 V
AC in
AIF 380 V
Bus Voltage 15 V
Full Brick
PFC Converter
12 V
5V
3.3 V
AIT02 AIF
1.8 V
BXA Low Power

Special Features
*OQVUWPMUBHFT 7 7 1SPUFDUJPOPWFSDVSSFOU
4JOHMFBOEEVBMPVUQVUT short-circuit
1PXFS8 7EDJTPMBUJPO
3FHVMBUFEPVUQVUT &ODMPTFEBOECBTFQMBUFNPEFMT
0QFSBUJOHUFNQFSBUVSF$UP 6- $4"BOE7%&TBGFUZBQQSPWBMT
$ BNCJFOUXJUIEFSBUJOH
BXA30
Input Voltage Output Voltage Package L x W x H (mm) I/O Isolation Efficiency Model Number
3W Enclosed
18-36 V 5 V @ 0.5 A 1.25” x 0.8” x 0.5” (31.75 x 20.32 x 12.70) 500 V 76% BXA3-24S05J
36-75 V 5 V @ 0.5 A 1.25” x 0.8” x 0.5” (31.75 x 20.32 x 12.70) 500 V 76% BXA3-48S05J
36-75 V 15 V @ 0.2 A 1.25” x 0.8” x 0.5” (31.75 x 20.32 x 12.70) 500 V 76% BXA3-48S15J
25 W Baseplate
36-75 V 5V@5A 3.02” x 2.41” x 0.52” (76.71 x 61.21 x 13.21) 1500 V 80% BXA30-48S05J
30 W Baseplate
36-75 V 15 V @ 2 A 3.02” x 2.41” x 0.52” (76.71 x 61.21 x 13.21) 1500 V 87% BXA30-48S15J
36-75 V 5 V @ ±2.5 A 3.02” x 2.41” x 0.52” (76.71 x 61.21 x 13.21) 1500 V 80% BXA30-48D05-FJ
36-75 V 12 V @ ±1.25 A 3.02” x 2.41” x 0.52” (76.71 x 61.21 x 13.21) 1500 V 84% BXA30-48D12J
36-75 V 15 V @ ±1.0 A 3.02” x 2.41” x 0.52” (76.71 x 61.21 x 13.21) 1500 V 86% BXA30-48D15J
40 W Baseplate
18-36 V 3.3 V @ 7 A 2.20” x 2.2” x 0.5” (55.88 x 55.88 x 12.70) 1500 V 75% BXA40-2453 V3-MJ
36-75 V 12 V @ 3.3 A 2.20” x 2.2” x 0.5” (55.88 x 55.88 x 12.70) 1500 V 87% BXA40-48S12-MJ
SXE & SXN Low Power

Special Features
*OQVUWPMUBHFT7ED 0QFSBUJOHUFNQFSBUVSF$
4JOHMFBOEEVBMPVUQVUT UP$ BNCJFOU
1PXFS8 1SPUFDUJPOPWFSDVSSFOUTIPSU
circuit/overvoltage
3FHVMBUFEPVUQVUT
7EDJTPMBUJPO
)JHIFGGJDJFODZUPQPMPHZ¯
87% @ 5 Vdc 6- $4"7%&TBGFUZBQQSPWBMT
3FNPUFPOPGG 4VSGBDFNPVOU
SXE15 SXN15
PVUQVUWPMUBHFUSJN
15 W Open-frame Surface-mounting
33-75 V 5V@3A 1.9” x 1.39” x 0.34” (48.26 x 35.31 x 8.64) 1500 V 87% SXE15-48S05-RJ
33-75 V 12 V @ 1.25 A 1.9” x 1.39” x 0.34” (48.26 x 35.31 x 8.64) 1500 V 85% SXE15-48S12-RJ
33-75 V 1.8 V @ 6 A 1.9” x 1.39” x 0.34” (48.26 x 35.31 x 8.64) 1500 V 83% SXE15-48S1 V8-RJ
33-75 V 2.5 V @ 6 A 1.9” x 1.39” x 0.34” (48.26 x 35.31 x 8.64) 1500 V 85% SXE15-48S2 V5-RJ
33-75 V 3.3 V @ 4.5 A 1.9” x 1.01” x 0.34” (48.26 x 25.65 x 8.64) 1500 V 86% SXE15-48S3 V3-RJ
33-75 V 5V@3A 1.9” x 1.01” x 0.34” (48.26 x 25.65 x 8.64) 1500 V 87% SXN15-48S05-RJ
33-75 V 1.8 V @ 6 A 1.9” x 1.01” x 0.34” (48.26 x 25.65 x 8.64) 1500 V 85% SXN15-48S1 V8-RJ
33-75 V 2.5 V @ 6 A 1.9” x 1.01” x 0.34” (48.26 x 25.65 x 8.64) 1500 V 85% SXN15-48S2 V5-RJ
33-75 V 3.3 V @ 4.5 A 1.9” x 1.01” x 0.34” (48.26 x 25.65 x 8.64) 1500 V 86% SXN15-48S3 V3-RJ
33-75 V 5 V @ 3 A & 3.3 V @ 4.5 A 1.9” x 1.39” x 0.34” (48.26 x 35.31 x 8.64) 1500 V 86% SXE15-48D05-3 V3-RJ
33-75 V 3.3 V @ 3.5 A & 2.5 V @ 4.5 A 1.9” x 1.01” x 0.34” (48.26 x 25.65 x 8.64) 1500 V 85% SXN15-48D3 V3-2 V5RJ
33-75 V 5 V @ 3 A & 3.3 V @ 4.5 A 1.9” x 1.01” x 0.34” (48.26 x 25.65 x 8.64) 1500 V 86% SXN15-48D05-3 V3-RJ
33-75 V 3.3 V @ 3.5 A & 2.5 V @ 4.5 A 1.9” x 1.01” x 0.34” (48.26 x 25.65 x 8.64) 1500 V 85% SXN15-48D3 V3-2 V5RJ
CXA Low Power

Special Features
JOQVUWPMUBHFSBOHF 7
4JOHMFBOEEVBMPVUQVUT
1PXFS8
3FHVMBUFEPVUQVUT
3FNPUFPOPGG
CXA20 PVUQVUWPMUBHFUSJN
0QFSBUJOHUFNQFSBUVSF$UP$ BNCJFOU
1SPUFDUJPOPWFSDVSSFOUTIPSUDJSDVJUPWFSWPMUBHF
#BTJDJOTVMBUJPO 7ED
6- $4"7%&TBGFUZBQQSPWBMT
10 W Open-frame
18-75 V 5V@2A 2” x 1” x 0.39” (50.80 x 25.40 x 10.00) 1500 V 81% CXA10-48S05J
18-75 V 12 V @ 0.83 A 2” x 1” x 0.39” (50.80 x 25.40 x 10.00) 1500 V 83% CXA10-48S12J
18-75 V 3.3 V @ 2.4 A 2” x 1” x 0.39” (50.80 x 25.40 x 10.00) 1500 V 78% CXA10-48S3V3J
18-75 V 5 V @ ±1.0 A 2” x 1” x 0.39” (50.80 x 25.40 x 10.00) 1500 V 81% CXA10-48D05J
18-75 V 12 V @ ±0.41 A 2” x 1” x 0.39” (50.80 x 25.40 x 10.00) 1500 V 83% CXA10-48D12J
18-75 V 15 V @ ±0.33 A 2” x 1” x 0.39” (50.80 x 25.40 x 10.00) 1500 V 81% CXA10-48D15J
20 W Open-frame
18-75 V 5V@4A 2” x 1.6” x 0.41” (50.80 x 40.64 x 10.41) 1500 V 83% CXA20-48S05J
18-75 V 12 V @ 1.66 A 2” x 1.6” x 0.41” (50.80 x 40.64 x 10.41) 1500 V 83% CXA20-48S12J
18-75 V 3.3 V @ 6 A 2” x 1.6” x 0.41” (50.80 x 40.64 x 10.41) 1500 V 80% CXA20-48S3V3J
18-75 V 5 V @ ±2.0 A 2” x 1.6” x 0.41” (50.80 x 40.64 x 10.41) 1500 V 84% CXA20-48D05J
18-75 V 12 V @ ±0.83 A 2” x 1.6” x 0.41” (50.80 x 40.64 x 10.41) 1500 V 84% CXA20-48D12J
Terms and Conditions
Index
Terms and Conditions of Sale
The Emerson Network Power company that accepts Buyer’s order for Goods is FORTH IN SECTIONS 5 AND 7 ARE THE SOLE AND EXCLUSIVE WARRANTIES
herein referred to as the “Seller” and the person or entity purchasing goods or GIVEN BY SELLER WITH RESPECT TO THE GOODS AND SOFTWARE AND
services (“Goods”) and/or licensing software and/or firmware which are preloaded, ARE IN LIEU OF AND EXCLUDE ALL OTHER WARRANTIES, EXPRESS OR
or to be loaded into Goods (“Software”) from Seller is referred to as the “Buyer.” IMPLIED, ARISING BY OPERATION OF LAW OR OTHERWISE, INCLUDING
These Terms and Conditions, any price list or schedule, quotation, acknowledgment WITHOUT LIMITATION, MERCHANTABILITY AND FITNESS FOR A PARTICULAR
or invoice from Seller relevant to the sale of the Goods and licensing of Software PURPOSE WHETHER OR NOT THE PURPOSE OR USE HAS BEEN DISCLOSED
and all documents incorporated by specific reference herein or therein constitute the TO SELLER IN SPECIFICATIONS, DRAWINGS OR OTHERWISE, AND WHETHER
complete and exclusive statement of the terms of the agreement governing the sale OR NOT SELLER’S PRODUCTS ARE SPECIFICALLY DESIGNED AND/OR
of Goods and license of Software by Seller to Buyer. Seller’s acceptance of Buyer’s MANUFACTURED BY SELLER FOR BUYER’S USE OR PURPOSE.
purchase order is expressly conditional on Buyer’s assent to all of Seller’s terms and
conditions of sale, including terms and conditions that are different from or additional These warranties do not extend to any losses or damages due to misuse, accident,
to the terms and conditions of Buyer’s purchase order. Buyer’s acceptance of the abuse, neglect, negligence (other than Seller’s), unauthorized modification or
Goods and/or Software will manifest Buyer’s assent to these Terms and Conditions. alteration, use beyond rated capacity, unsuitable power sources or environmental
Seller reserves the right in its sole discretion to refuse orders. Notwithstanding conditions, improper installation, repair, handling, maintenance or application or
anything to the contrary, in the event that the provisions of these Terms and any other cause not the fault of Seller. To the extent that Buyer or its agents have
Conditions conflict with the provisions of an effective agreement signed by a duly supplied specifications, information, representation of operating conditions or other
authorized representative of both parties (“Effective Agreement”) that applies to the data to Seller in the selection or design of the Goods and the preparation of Seller’s
transaction(s) contemplated herein, the Effective Agreement shall control. quotation, and in the event that actual operating conditions or other conditions differ
from those represented by Buyer, any warranties or other provisions contained
1. PRICES: Unless otherwise specified in writing by Seller, the price quoted or herein that are affected by such conditions shall be null and void.
specified by Seller for the Goods and/or Software shall remain in effect for thirty (30)
days after the date of Seller’s quotation or acknowledgment of Buyer’s order for the If within thirty (30) days after Buyer’s discovery of any warranty defects within the
Goods and/or Software, whichever occurs first, provided an unconditional authori- warranty period, Buyer notifies Seller thereof in writing, Seller shall, at its option and
zation from Buyer for the shipment of the Goods and/or Software is received and as Buyer’s exclusive remedy, repair, correct or replace per its return policy, or refund
accepted by Seller within such time period. If such authorization is not received by the purchase price for, that portion of the Goods found by Seller to be defective.
Seller within such thirty (30) day period, Seller shall have the right to change the price Failure by Buyer to give such written notice within the applicable time period shall
for the Goods and/or Software to Seller’s price for the Goods and/or Software at the be deemed an absolute and unconditional waiver of Buyer’s claim for such defects.
time of shipment. All prices and licensee fees are exclusive of taxes, transportation Advance written permission to return Goods must be obtained from Seller. Such
and insurance, which are to be borne by Buyer. Goods must be shipped transportation prepaid to Seller. Returns made without proper
written permission will not be accepted by Seller. Seller reserves the right to inspect
2. TAXES: Any current or future tax or governmental charge (or increase in same) Goods prior to authorizing return. Goods repaired or replaced during the warranty
affecting Seller’s costs of production, sale, or shipment, or which Seller is otherwise period shall be covered by the foregoing warranties for the remainder of the original
required to pay or collect in connection with the sale, purchase, delivery, storage, warranty period or ninety (90) days from the date of shipment, whichever is longer.
processing, use or consumption of Goods, shall be for Buyer’s account and shall be
added to the price or billed to Buyer separately, at Seller’s election. Buyer assumes all other responsibility for any loss, damage, or injury to persons or
property arising out of, connected with, or resulting from the use of Goods and/or
3. TERMS OF PAYMENT: Unless otherwise specified by Seller, terms are net thirty Software, either alone or in combination with other products/components.
(30) days from date of Seller’s invoice in U.S. currency. Seller shall have the right,
among other remedies, either to terminate this agreement or to suspend further PRE-PRODUCTION (Prototype, Engineering Verification Test, or Design Verification
performance under this and/or other agreements with Buyer in the event Buyer fails Test) UNITS ARE SOLD “WHERE IS, AS IS, WITH ALL FAULTS” WITHOUT
to make any payment when due, which other agreements Buyer and Seller hereby WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING, WITHOUT
amend accordingly. Buyer shall be liable for all expenses, including attorneys’ fees, LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
relating to the collection of past due amounts. If any payment owed to Seller is not INTENDED PURPOSE.
paid when due, it shall bear interest, at a rate to be determined by Seller, which shall
not exceed the maximum rate permitted by law, from the date on which it is due until 6. LIMITATION OF REMEDY AND LIABILITY: THE SOLE AND EXCLUSIVE
it is paid. Any payment due to either party under this agreement shall be made in full REMEDY FOR BREACH OF ANY WARRANTY HEREUNDER (OTHER THAN THE
without any set-off, restriction, condition deduction or withholding for or on account WARRANTY PROVIDED UNDER SECTION 7) SHALL BE LIMITED TO REPAIR,
of any counterclaim. Should Buyer’s financial responsibility become unsatisfactory to CORRECTION OR REPLACEMENT, OR REFUND OF THE PURCHASE PRICE
Seller, cash payments or security satisfactory to Seller may be required by Seller for UNDER SECTION 5.
future deliveries of the Goods and/or Software. If such cash payment or security is
not provided, in addition to Seller’s other rights and remedies, Seller may discontinue SELLER SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY DELAY IN
deliveries. PERFORMANCE AND THE REMEDIES OF BUYER SET FORTH IN THIS
AGREEMENT ARE EXCLUSIVE. IN NO EVENT, REGARDLESS OF THE
4. SHIPMENT AND DELIVERY: While Seller will use all reasonable commercial FORM OF THE CLAIM OR CAUSE OF ACTION (WHETHER BASED IN
efforts to maintain the delivery date(s) acknowledged or quoted by Seller, all shipping CONTRACT, INFRINGEMENT, NEGLIGENCE, STRICT LIABILITY, OTHER TORT
dates are approximate and not guaranteed. Seller reserves the right to make partial OR OTHERWISE), SHALL SELLER’S LIABILITY TO BUYER AND/OR ITS
shipments. Seller, at its option, shall not be bound to tender delivery of any Goods CUSTOMERS EXCEED THE PRICE PAID BY BUYER FOR THE SPECIFIC
and/or Software for which Buyer has not provided shipping instructions and other GOODS OR SOFTWARE PROVIDED BY SELLER GIVING RISE TO THE
required information. If the shipment of the Goods and/or Software is postponed CLAIM OR CAUSE OF ACTION. BUYER AGREES THAT IN NO EVENT SHALL
or delayed by Buyer for any reason, Buyer agrees to reimburse Seller for any and SELLER’S LIABILITY TO BUYER AND/OR ITS CUSTOMERS EXTEND TO
all storage costs and other additional expenses resulting therefrom. Risk of loss INCLUDE INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES. The term
and legal title to the Goods shall transfer from Seller to Buyer upon delivery to and “consequential damages” shall include, but not be limited to, loss of anticipated
receipt by carrier at Seller’s shipping point. Unless otherwise specified by Seller, profits, business interruption, loss of use, revenue, reputation and data, costs
all shipments are F.C.A. Seller’s shipping point (Incoterms 2000). Any claims for incurred, including without limitation, for capital, fuel, power and loss or damage to
shortages or damages suffered in transit are the responsibility of Buyer and shall be property or equipment. It is expressly understood that any technical advice furnished
submitted by Buyer directly to the carrier. Shortages or damages must be identified by Seller with respect to the use of the Goods and/or Software is given without
and signed for at the time of delivery. charge, and Seller assumes no obligation or liability for the advice given, or results
obtained, all such advice being given and accepted at Buyer’s risk.
Buyer shall inspect Goods delivered to it by Seller immediately upon receipt, and,
any course of dealing to the contrary notwithstanding, failure of Buyer to give Seller 7. PATENTS AND COPYRIGHTS: Subject to the limitations of the second paragraph
notice of any claim within 10 days after receipt of such Goods shall be an unqualified of Section 6, Seller warrants that the Goods sold, except as are made specifically
acceptance of such Goods. for Buyer according to Buyer’s specifications, do not infringe any valid U.S. patent
or copyright in existence as of the date of shipment. This warranty is given upon
5. LIMITED WARRANTY: Subject to the limitations of Section 6 and unless otherwise the condition that Buyer promptly notify Seller of any claim or suit involving Buyer in
specified by Seller in writing, Seller warrants that the Goods manufactured by Seller which such infringement is alleged and cooperate fully with Seller and permit Seller
will be free from defects in material and workmanship and substantially meet Seller’s to control completely the defense, settlement or compromise of any such allegation
published specifications at the time of shipment under normal use and regular service of infringement. Seller’s warranty as to utility patents only applies to infringement
and maintenance for (a) the period specified in Seller’s then current product datasheets arising solely out of the inherent operation according to Seller’s specifications and
from the date of manufacture by Seller for standard Embedded Power Goods, (b) two instructions of such Goods. In the event such Goods are held to infringe such a U.S.
(2) years from initial shipment for standard Embedded Computing Goods, and (c) the patent or copyright in such suit, and the use of such Goods is enjoined, or in the case
period specified by Seller in writing for custom Embedded Power Goods and custom of a compromise or settlement by Seller, Seller shall have the right, at its option and
Embedded Computing Goods. Unless otherwise stated in a separate Software license expense, to procure for Buyer the right to continue using such Goods, or replace
agreement, Seller makes no warranty as to any Software. THE WARRANTIES SET them with non-infringing Goods, or modify same to become non-infringing, or grant
64
Terms and Conditions
Buyer a credit for the depreciated value of such Goods and accept return of them. In 17. EXPORT/IMPORT: Buyer agrees that all applicable import and export control
the event of the foregoing, Seller may also, at its option, cancel the agreement as to laws, regulations, orders and requirements, including without limitation those of the
future deliveries of such Goods, without liability. United States and the European Union, and the jurisdictions in which the Seller and
Buyer are established or from which Goods and/or Software may be supplied, will
8. EXCUSE OF PERFORMANCE: Seller shall not be liable for delays in performance apply to their receipt and use. In no event shall Buyer use, transfer, release, import,
or for non-performance due to acts of God; acts of Buyer; war; fire; flood; weather; export, Goods and/or Software in violation of such applicable laws, regulations,
sabotage; epidemics; strikes or labor disputes; civil disturbances or riots; gov- orders or requirements.
ernmental requests, restrictions, allocations, laws, regulations, orders or actions;
unavailability of or delays in transportation; default of suppliers; or unforeseen cir- 18. GOVERNMENT CONTRACT CONDITIONS: In the event Buyer supplies
cumstances or any events or causes beyond Seller’s reasonable control. Deliveries Goods or Software to the U.S. Government or to a prime contractor selling to the
or other performance may be suspended for an appropriate period of time or canceled U.S. Government, the following Federal Acquisition Regulation (FAR) clauses are
by Seller upon notice to Buyer in the event of any of the foregoing, but the balance of accepted by Seller and are made part of this agreement applicable to such supply:
the agreement shall otherwise remain unaffected as a result of the foregoing. 52.222-21 Prohibition of Segregated Facilities; 52.222-26 Equal Opportunity;
52.222-35 Equal Opportunity For Special Disabled Veterans, Veterans of Vietnam
If Seller determines that its ability to supply the total demand for the Goods, or Era, and Other Eligible Veterans; 52.222-36 Affirmative Action For Workers with
to obtain material used directly or indirectly in the manufacture of the Goods, is Disabilities; and 52.219-8 Utilization of Small Business Concerns. No additional FAR
hindered, limited or made impracticable due to causes set forth in the preceding or FAR Supplement clauses are accepted by Seller. In the event Buyer elects to sell
paragraph, Seller may allocate its available supply of the Goods or such material Goods or Software to the U.S. Government or any national, state, provincial or local
(without obligation to acquire other supplies of any such Goods or material) among non-U.S. governmental entity or to a prime contractor selling to such entities, Buyer
its purchasers on such basis as Seller determines to be equitable without liability for does so solely at its own option and risk, and agrees not to obligate Seller as a sub-
any failure of performance which may result therefrom. contractor or otherwise to the U.S. Government or other governmental entity except
as described in this Section 18. Buyer remains solely and exclusively responsible for
9. RESCHEDULE/CANCELLATION: Unless otherwise agreed in writing by Seller, compliance with all statutes and regulations governing sales to the U.S. Government
orders under this agreement may not be rescheduled or canceled by Buyer for or any national, state, provincial or local non-U.S. governmental entity. Seller makes
any reason. no representations, certifications or warranties whatsoever with respect to the ability
of its Goods, Software, or prices to satisfy any such statutes and regulations.
10. CHANGES: Buyer may request changes or additions to the Goods and/
or Software consistent with Seller’s specifications and criteria. In the event such 19. GENERAL PROVISIONS: These terms and conditions supersede all other com-
changes or additions are accepted by Seller, Seller may revise the price, license fees munications, negotiations and prior oral or written statements regarding the subject
and dates of delivery. Seller reserves the right to change designs and specifications matter of these terms and conditions. No change, modification, rescission, discharge,
for the Goods and/or Software without prior notice to Buyer, except with respect to abandonment, or waiver of these terms and conditions shall be binding upon the
Goods and/or Software being made-to-order for Buyer. Seller shall have no obligation Seller unless made in writing and signed on its behalf by a duly authorized repre-
to install or make such change in any Goods and/or Software manufactured prior to sentative of Seller. No conditions, usage of trade, course of dealing or performance,
the date of such change. understanding or agreement purporting to modify, vary, explain, or supplement
these terms and conditions shall be binding unless hereafter made in writing and
11. NUCLEAR/MEDICAL: GOODS AND SOFTWARE SOLD HEREUNDER ARE signed by the party to be bound, and no modification or additional terms shall be
NOT FOR USE IN CONNECTION WITH ANY NUCLEAR, MEDICAL, LIFESUPPORT applicable to this agreement by Seller’s receipt, acknowledgment, or acceptance
AND OTHER HIGH RISK APPLICATIONS WHERE GOODS OR SOFTWARE of purchase orders, shipping instruction forms, or other documentation containing
FAILURE COULD LEAD TO LOSS OF LIFE OR CATASTROPHIC PROPERTY terms at variance with or in addition to those set forth herein. Any such modifications
DAMAGE. Buyer accepts Goods and Software with the foregoing understanding, or additional terms are specifically rejected and deemed a material alteration hereof.
agrees to communicate the same in writing to any subsequent purchasers or users If this document shall be deemed an acceptance of a prior offer by Buyer, such
and to defend, indemnify and hold harmless Seller from any claims, losses, suits, acceptance is expressly conditional upon Buyer’s assent to any additional or different
judgments and damages, including incidental and consequential damages, arising terms set forth herein. No waiver by either party with respect to any breach or default
from such use, whether the cause of action be based in tort, contract or otherwise, or of any right or remedy, and no course of dealing, shall be deemed to constitute
including allegations that the Seller’s liability is based on negligence or strict a continuing waiver of any other breach or default or of any other right or remedy,
liability. unless such waiver be expressed in writing and signed by the party to be bound. All
typographical or clerical errors made by Seller in any quotation, acknowledgment or
12. ASSIGNMENT: Buyer shall not assign its rights or delegate its duties hereunder publication are subject to correction. In the event that any provision or portion thereof
or any interest herein without the prior written consent of Seller, and any such contained in the Contract is held to be unenforceable, the Contract shall be construed
assignment, without such consent, shall be void. without such provision or portion thereof.
13. SOFTWARE: Notwithstanding any other provision herein to the contrary, Seller (A) If Seller is a U.S. incorporated entity: This Agreement shall be governed by the
or applicable third party licensor to Seller shall retain all rights of ownership and title laws of the State of Delaware, U.S.A., without reference to its choice or conflict of
in its respective Software, including without limitation all rights of ownership and title laws principles. The parties agree to submit to the exclusive jurisdiction of the courts
in its respective copies of such Software. Except as otherwise provided herein, Buyer of the State of Delaware for all actions arising in connection herewith.
is hereby granted a nonexclusive, non-transferable royalty free license to use the
Software incorporated into the Goods solely for purposes of Buyer properly utilizing (B) If Seller is a European incorporated entity: This Agreement shall be governed by
such Goods purchased from Seller. All other Software shall be furnished to, and the laws of England. Any dispute arising out of or in connection with this Agreement
used by, Buyer only after execution of Seller’s (or the licensor’s) applicable standard that cannot be resolved through friendly consultation shall be referred to and finally
license agreement, the terms of which are incorporated herein by reference. The resolved by arbitration in London, England before the London Court of International
Software is Seller’s own or Seller’s supplier’s proprietary information, and Buyer and Arbitration in accordance with its arbitration rules. The arbitral award shall be final
its employees and agents shall not disclose the Software to others without Seller’s and binding on the parties.
prior written consent.
(C) If Seller is an entity incorporated in the Asia Pacific region: This Agreement
14. TOOLING: Tool, die, and pattern charges, if any, are in addition to the price of the shall be governed by the laws of the Hong Kong Special Administrative Region of
Goods and are due and payable upon completion of the tooling. All such tools, dies the People’s Republic of China. Any dispute arising out of or in connection with this
and patterns shall be and remain the property of Seller. Charges for tools, dies, and Agreement that cannot be resolved through friendly consultation shall be referred to
patterns do not convey to Buyer, title, ownership interest in, or rights to possession and finally resolved by arbitration in Hong Kong before the Hong Kong International
or removal, or prevent their use by Seller for other purchasers, except as otherwise Arbitration Centre in accordance with its arbitration rules. The arbitral award shall be
expressly provided by Seller and Buyer in writing with reference to this provision. final and binding on the parties.
15. DRAWINGS: Seller’s prints and drawings (including without limitation, the (D) No action, regardless of form, arising out of transactions relating to this
underlying technology) furnished by Seller to Buyer in connection with this agreement agreement, may be brought by either party more than two (2) years after the cause
are the property of Seller and Seller retains all rights, including without limitation, of action has accrued. The U.N. Convention on Contracts for the International Sales
exclusive rights of use, licensing and sale. Possession of such prints or drawings does not of Goods shall not apply to this agreement.
convey to Buyer any rights or license, and Buyer shall return all copies (in whatever
medium) of such prints or drawings to Seller immediately upon request therefor. Revised February 6, 2009
16. BUYER’S COMPLIANCE WITH LAWS: In connection with the transactions

contemplated by this agreement, Buyer is familiar with and shall fully comply with all
applicable laws, regulations, rules and other requirements of the United States and
of any applicable state, foreign and local governmental body in connection with the
purchase, license, receipt, use, transfer and disposal of the Goods and/or Software.
65
Index
Technology Index
Section Page Section Page Section Page
Low Power Intelligent High Power Industry Standard Non-Isolated

LCT 7 iVS 27, 28, 29, 30 APA 55
LPQ 9, 10, 11,12 APC 55
LPS 7, 8, 9, 10, 11, 12 Bulk Power DDR 59
LPT 7, 8, 9, 10 HPS 31, 32, 33 LDO 53
NFS 8, 10 UFE 31, 32, 33 -("
NLP 7, 9, 10, 12 PTH 57, 58
NPS 8 Distributed Power PTV 58
NTQ 10, 11 DS 34, 35, 36, 37, 38 SIL 52, 53, 55
NTS 12 SMT 52, 53, 55, 56
TLP 11 Din Rail VRM 59
ADN 39
External Power High Power
AD 14, 15 MicroTCA AIF 60
DA 13, 14 MTC 40, 41 AIH 60
DCH 13 AIQ 60
DP 14 AdvancedTCA AIT 60
DPS 15 ATC 44 BXA 62
DPT 14 CXA 63
Industry Standard Isolated SXE 62
Medical Power AED 51 SXN 62
AD 19 AEH 49
DA 19 AEO 46
DP 19 AEQ 47, 51
DPS 19 ALD 45, 51
DPT 19 ALH 49
iMP 18 ALO 46
iVS 18 ALQ 47, 51
LPQ 18 BXB 49
LPS 16, 17, 18 EXB 49, 50
LPT 16, 17 EXQ 48
NFS 16, 17 IBC 51
NLP 17, 18 LES 46
NPS 16 LQD 48
NTS 18 LQS 47
TLP 17 RFB 50
RFF 50
Medium Power
MP 20, 21, 22

iMP 23, 24, 25, 26
66
Ecosystem Leadership Americas
5810 Van Allen Way
Just as nature relies on communities of organisms functioning as an ecological unit, embedded
Carlsbad, CA 92008
power solutions depend on a broad and powerful ecosystem, including standards bodies, industry
USA
associations, technology alliances and engineering communities. Emerson Network Power brings a Telephone: +1 760 930 4600
wealth of innovation and many years experience to accredited standards development organizations, Facsimile: +1 760 930 0698
specification consortia and industry associations through our executive memberships and key
committee positions. We have long been committed to a strong ecosystem that works to further Europe (UK)
the development of the industries and technologies that are important to our customers’ success. Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
Telephone: +44 (0) 1384 842 211
Facsimile: +44 (0) 1384 843 355
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
Telephone: +852 2176 3333
Facsimile: +852 2176 3888
For global contact, visit:

TechSupport.EmbeddedPower@
Emerson.com
While every precaution has been taken to ensure

accuracy and completeness in this literature,
Emerson, Emerson. Consider It Solved, Business-Critical Continuity and Emerson Network Power are trademarks of Emerson Electric Co. Emerson Network Power assumes no responsibility,
PSPOFPGJUTBGGJMJBUFEDPNQBOJFT1*$.( "EWBODFE5$" "5$" .JDSP5$" BOEUIF"EWBODFE5$"BOE.JDSP5$"MPHPTBSFUSBEFNBSLTPG and disclaims all liability for damages resulting from
UIF1$**OEVTUSJBM$PNQVUFS.BOVGBDUVSFST(SPVQ*OUFMJTBUSBEFNBSLPSSFHJTUFSFEUSBEFNBSLPG*OUFM$PSQPSBUJPOPSJUTTVCTJEJBSJFTJO use of this information or for any errors or omissions.
the US and other countries. PMBus and the PMBus logo are trademarks of System Management Interface Forum, Inc. The word mark
±5IF(SFFO(SJE²BOE5IF(SFFO(SJEEFTJHONBSLPSMPHPBSFTFSWJDFNBSLTPG5IF(SFFO(SJE"TTPDJBUJPO"MMPUIFSUSBEFNBSLTBSFUIF Printed in USA
property of their respective owners. ©2010 Emerson Electric Co. Issue SF5 2010
Emerson Network Power. EmersonNetworkPower.com

The global leader in enabling Business Critical Continuity™.
AC Power Embedded Computing Outside Plant Racks & Integrated Cabinets

Connectivity Embedded Power Power Switching & Controls Services
DC Power Infrastructure Management & Monitoring Precision Cooling Surge Protection

Embedded Power AC-DC and DC-DC Products PDF

Uploaded by

Copyright:

Available Formats

Embedded Power AC-DC and DC-DC Products PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Embedded Power AC-DC and DC-DC Products PDF

Uploaded by

Copyright:

Available Formats

Embedded Power for

Embedded Power AC—DC and DC—DC Products

T + 1 (760) 930 4600

5) Voltage Regulator Modules (VRMs); and

6) IPM300 Dual 48V ATCA Input Power Modules;

Emerson Network Power Page 2 of 2

Embedded Power AC—DC and DC—DC Products

embedded power markets.

Accelerate, Improve & Enhance the Capabilities

MyPower is a free community portal that provides

To sign up for a free MyPower account go to

Output Power Output

[25 W] 25 W NLP25 Series

[50 W] 40 W NLP40 Series

Output Power Output

[50 W] 40 W NFS40 Series

Output Power Output

[75 W] 65 W NLP65 Series

[110 W] 80 W LP110 Series

Output Power Output

[110 W] 80 W NFS80 Series

[110 W] 80 W NLP110 Series

[130 W] 80 W LP120 Series

Output Power Output

[150 W] 100 W TLP150 Series

[150 W] 100 W LPS100-M Series

Output Power Output

[250 W] 125 W LPS200-M Series

Output Power V1 V2 V3 Size W x L x H (mm) Model

3W DCH3 Series — USB

Output Power V1 V2 V3 Size W x L x H (mm) Model

Output Power V1 V2 V3 Size W x L x H (mm) Model

Healthcare AC—DC Power Supplies

3FNPUFTFOTF 0WFSWPMUBHFQSPUFDUJPO %FSBUFEPQFSBUJPOUP$ 8JEFBEKVTUGMPBUJOHUIPVUQVU

Output Power Output

[50 W] 40 W NFS40 Series — Medical

Output Power Output

[75 W] 65 W NLP65 Series — Medical

(1) 5 V @ 13 A [18 A] 15 V @ 4 A [7.2 A] -15 V @ 1 A [1.5 A] LPT103-M

Output Power Output

[175 W] 110 W LP170-M Series — Medical

[250 W] 125 W LPS200-M Series — Medical

(1) 15 V @ 8.3A [16.6 A]* LPS204-M

[500 W] 200 W NTS500-M Series — Medical

Up to 1500 W iMP Medium Power Series

1500-4920 W iVS High Power Series

Output Power V1 V2 V3 Size W x L x H (mm) Model

50 W DPT50-M Series — Medical

60 W DPS50-M Series — Medical

Total Power: Up to 1200 W

Radiated EMI CISPR 22

Output Environmental Specifications

Housekeeping standby 5 Vdc @1.0 A mA maximum present whenever AC input is

MP1 - 3L - 2E - 1Q - 4LL - HUP - 00 - ###

Case Specifications MP8 and MP1

available slots 14 V M 14 A 21 A 40.5 A 9A 4A 1A 1A 1A

available slots 18 V O 11 A 19 A 33.3 A – – – 0.5 A 0.5 A

available slots 24 V Q 8.5 A 15 A 23.5 A 4A 2A – 0.5 A 0.5 A

Intelligent modular power supply

3FNPUFTFOTF 0WFSWPMUBHFQSPUFDUJPO %FSBUFEPQFSBUJPOUP$ 8JEFBEKVTUGMPBUJOHUIPVUQVU

Vibration/Shock /POPQFSBUJPOBM(4JOFTXFFQGSPN Output isolation Per POE specs (>2000 Vac)

Normal operating $UP$

IBC25 $UP$BNCJFOU PQFOGSBNF

IBC60 3JDIGFBUVSFTFUTPWFSWPMUBHF PWFS