Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 654 views

    Cylinder Head Replacement - Left Side: Applies To

    Uploaded by

    José Ramón Torres
    The document provides instructions for replacing the cylinder head on the left side of a 3.4L 2008 Chevrolet Equinox engine. The procedure involves removing components like the spark plugs, intake manifold, and exhaust manifolds to access the cylinder head. The cylinder head bolts must then be removed and replaced with new torque-to-yield bolts before installing the new cylinder head and gasket. Finally, the removed components are reinstalled in reverse order.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Cylinder Head Replacement - Left Side: Applies To

    Uploaded by

    José Ramón Torres
    654 views4 pages
    The document provides instructions for replacing the cylinder head on the left side of a 3.4L 2008 Chevrolet Equinox engine. The procedure involves removing components like the spark plugs, intake manifold, and exhaust manifolds to access the cylinder head. The cylinder head bolts must then be removed and replaced with new torque-to-yield bolts before installing the new cylinder head and gasket. Finally, the removed components are reinstalled in reverse order.

    Original Title

    cabeza

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for replacing the cylinder head on the left side of a 3.4L 2008 Chevrolet Equinox engine. The procedure involves removing components like the spark plugs, intake manifold, and exhaust manifolds to access the cylinder head. The cylinder head bolts must then be removed and replaced with new torque-to-yield bolts before installing the new cylinder head and gasket. Finally, the removed components are reinstalled in reverse order.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    654 views4 pages

    Cylinder Head Replacement - Left Side: Applies To

    Uploaded by

    José Ramón Torres
    The document provides instructions for replacing the cylinder head on the left side of a 3.4L 2008 Chevrolet Equinox engine. The procedure involves removing components like the spark plugs, intake manifold, and exhaust manifolds to access the cylinder head. The cylinder head bolts must then be removed and replaced with new torque-to-yield bolts before installing the new cylinder head and gasket. Finally, the removed components are reinstalled in reverse order.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    10/30/21, 9:18 PM 2008 Chevrolet Equinox • MotoLogic

    Cylinder Head Replacement - Left Side

    Report a problem with this article

    Applies to:

    3.4L

    Tools Required

    Angle Meter

    Removal Procedure

    1. Drain the engine coolant from the cooling system. Refer to Cooling System Draining and Filling.
    2. Remove the engine left side spark plug wires from the spark
    plugs. Refer to Spark Plug Wire
    Replacement.

    3. Remove the spark plug wire retainer support


    bolt (2) and support (1).
    4. Remove the engine left side spark plugs. Refer to Spark Plug Replacement.
    5. Remove the left valve rocker arm cover. Refer to Valve Rocker Arm Cover Removal - Left Side.
    6. Remove the lower intake manifold. Refer to Lower Intake Manifold Replacement.
    7. Remove the oil level indicator tube. Refer to Oil Level Indicator Tube Replacement.
    8. Remove the exhaust crossover pipe. Refer to Exhaust Crossover Pipe Replacement.
    9. Remove the engine left side exhaust manifold. Refer to Exhaust Manifold Replacement - Left Side.

    https://www.motologic.com/car/82260b70-a822-012a-9d60-f67652ef7803/article/0e1715ed442b68ba46d2e7f60b8aa903?returnPath=%2Fcar%2F822… 1/4
    10/30/21, 9:18 PM 2008 Chevrolet Equinox • MotoLogic

    10. Remove the cylinder head bolts and discard.


    11. Remove the cylinder head.
    ↻

    12. Remove the cylinder head gasket.


    Important:
    All gasket mating surfaces must remain free of oil and
    foreign material. Refer to Adhesives,
    Fluids, Lubricants, and Sealers
    for the correct part number
    to use to clean surfaces.

    13. Clean the following areas:

    The gasket sealing surfaces on the cylinder head, cylinder


    block, intake manifold, and exhaust manifold
    The cylinder block bolt threads

    Installation Procedure

    https://www.motologic.com/car/82260b70-a822-012a-9d60-f67652ef7803/article/0e1715ed442b68ba46d2e7f60b8aa903?returnPath=%2Fcar%2F822… 2/4
    10/30/21, 9:18 PM 2008 Chevrolet Equinox • MotoLogic

    1. Install the cylinder head gasket.

    2. Install the cylinder head.


    ↻

    Notice:
    This component uses torque-to-yield bolts. When servicing
    this component do not reuse the bolts,
    New torque-to-yield bolts
    must be installed. Reusing used torque-to-yield bolts will not
    provide proper bolt
    torque and clamp load. Failure to install NEW
    torque-to-yield bolts may lead to engine damage.

    Notice:
    Refer to Fastener Notice.

    3. Install the NEW cylinder head bolts.

    Tighten

    https://www.motologic.com/car/82260b70-a822-012a-9d60-f67652ef7803/article/0e1715ed442b68ba46d2e7f60b8aa903?returnPath=%2Fcar%2F822… 3/4
    10/30/21, 9:18 PM 2008 Chevrolet Equinox • MotoLogic

    Tighten the bolts in sequence to 60 Y


    (44 lb ft). Turn the bolts an additional
    95 degrees using the .
    4. Install the engine left side exhaust manifold. Refer to Exhaust Manifold Replacement - Left Side.
    5. Install the exhaust crossover pipe. Refer to Exhaust Crossover Pipe Replacement.
    6. Install the oil level indicator tube. Refer to Oil Level Indicator Tube Replacement.
    7. Install the lower intake manifold. Refer to Lower Intake Manifold Replacement.
    8. Install the left valve rocker arm cover. Refer to Valve Rocker Arm Cover Removal - Left Side.
    9. Install the engine left side spark plugs. Refer to Spark Plug Replacement.

    10. Install the spark plug wire retainer support (1)


    and bolt (2).

    Tighten

    Tighten the bolt to 25 Y


    (18 lb ft).
    11. Install the engine left side spark plug wires to the spark
    plugs. Refer to Spark Plug Wire Replacement.
    12. Fill the cooling system with engine coolant. Refer to Cooling System Draining and Filling.

    https://www.motologic.com/car/82260b70-a822-012a-9d60-f67652ef7803/article/0e1715ed442b68ba46d2e7f60b8aa903?returnPath=%2Fcar%2F822… 4/4

    You might also like