Low Frequency Split Phase Inverter Charger Solar Power System

PV3300 TLV Series (1KW-6KW)

Specification
PV33- PV33- PV33- PV33- PV33- PV33- PV33- PV33- PV33- PV33- PV33- PV33-
Features MODEL 1012 1024 1512 1524 2012 2024 3024 3048 4024 4048 5048 6048
TLV TLV TLV TLV TLV TLV TLV TLV TLV TLV TLV TLV
• Pure sine wave output
• Friendly user interface;MFD (multi-function display) Rated power 1KW 1.5KW 2KW 3KW 4KW 5KW 6KW

• 3 Steps charging Power factor 1

• Overload and short-circuit protection
Wave form Pure sine wave
• Set charging voltage/charging current.
Output voltage RMS 100V \ 110V \ 120VAC(200V \ 220V \ 240VAC)±10%
• Battery low voltage shutdown point can be set to 10/10.5/11V
• Set utility priority/ Battery priority Inverter Output frequency 50Hz or 60Hz (±0.3Hz)
• Set utility input wide/narrow range Output
Inverter efficiency (peak) >85%
• Inverter voltage can be set to 100/110/120;frequency can be set to 50/60Hz
• Set utility charging on/off switch 100%<Load<110% (alarm 5min then stop output ) \ 110%<Load<125% (alarm 60s then stop output) \
Overload
Load > 125% (alarm 10s then stop output )
(1KW-3KW) (4KW-6KW) • Built-in 80A MPPT charger
Surge rating 3000VA 4500VA 6000VA 9000VA 12000VA 15000VA 15000VA

Capable of starting electric

Introduction 1P 1P 1.5P 1.5P 2P 3P
motor

This split phase inverter PV3300 TLV series, capacity from 1KW-6KW, DC 12V/24V/48V, it’s applicable to 110VAC/120VAC markets demands, which Battery voltage 12VDC/24VDC 24VDC/48VDC 48VDC
matches AC 110VAC/120V single phase, or two phase 110VAC/120V 220V/240V; In LCD display, you can set output voltage, frequency, charging
voltage, charging current to design best use based on different loads applications; meanwhile, it has already built-in solar charge controller, you can take Minimum start voltage 11VDC/22VDC/44VDC
use of sunshine freely and save electricity bills.
Low battery voltage cut off (Low voltage fault code04)10\10.5\11V for 12V mode ; 20\21\22V for 24V model ; 40\42\44V for 48v model

Back panel printing description Solar system connection

Add 0.5V \ battery:(Low battery alarm one second one time)
(10 \ 10.5 \ 11V)+0.5VDC for 12V mode
Low battery voltage alarm
6 3 4 5 2 (20 \ 21 \ 22V) +1Vdc for 24v model
Battery (40 \ 42 \ 44V) +2Vdc for 48v model
Solar Panel

10

9
Add +1V\battery: (high voltage one second one time\after 30s fault 03)
8
1 (13.8-14.5V) + 1V for 12V model
High battery voltage alarm
(27.6-29V) + 2V for 24v model
7 (55.2-58) + 4V for 48v model

Power Grid

[ 1-3K Back Panel ] Save mode Loads ≤ 40W (110V) \ 80W (220V)

6 3 4 5 2 Input waveform Pure sine wave

Generator
Nominal input voltage 200Vac \ 220Vac \ 240Vac
10

Max input voltage 270Vac MAX

9
AC Input
Fridge
8
1 Mode
Input frequency 50Hz \ 60Hz (auto sensing)
7
Air-conditioner Efficiency (AC mode) >95% (load, full battery)

BAT input Transfer time AC to DC 15ms(typical)

[ 4-6K Back Panel ] Load
PC
BAT charge 12V 30A 45A 60A \ \ \ \
1. Battery -/+
TV
2. REMOTE PORT 24V 20A 25A 30A 40A 60A \ \
Charge
3. BTS Mode
Battery 48V \ \ \ 20A 30A 35A 40A
4. AGS Washing machine

5. USB Min charge current 10A. Change by every 5A

6. AC INPUT PROTECT: Input protect breaker
7. PV -/+ Dimensions (W*H*D) 277*196*466mm 277*186*621mm
8. AC OUTPUT: HOT1 - HOT2 200VAC/220 VAC/240VAC
9. AC OUTPUT: HOT2 - N 100VAC/110 VAC/120VAC Dimensions Ship Dimensions (W*H*D) 376*306*592mm 376*296*747mm

10. AC INPUT: HOT1 - HOT2 200VAC/220 VAC/240VAC

Warranty One year (standard), 2 years optional (IP20)

- 15 - - 16 -