Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

I210 (DDZ1513) : Single Phase Modular AMI Meter

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

i210(DDZ1513)

Single Phase Modular AMI Meter

HIGHLIGHT

IP54 TOU AMI


HIGH
MULTI- M-BUS INTERFACE STS SUPPORT
PROTECTION DLMS/COSEM ANTI-TAMPER TIME OF USE
COMMUNICATION WATER, HEAT & GAS COMPLIANCE AMI FUNCTIONS
DEGREE

i210(DDZ1513) is single phase multi-functions AMI meter with modular design. The meter is used to measure electrical energy accurately
for commercial, industries and residential customers. The meter provides broad range of functions and smart metering possibilities, with
flexible communication module meter provides varieties communication medias for remote management and reading.

This meter can be utilized for prepayment (comply with STS standard) and post payment applications (selectable by utility company).
i210(DDZ1513) has excellent anti-tamper feature like terminal cover detection to help utility for revenue protection. i210(DDZ1513) can
utilizes different communication media to CIU or Data Concentrator (for Smart Metering application) like PLC, Cable or RF based on
customer requirements.

i210(DDZ1513) utilize M-BUS interface for collecting data and interacting with the 3rd party gas, heat and water meters.
i210(DDZ1513)
Single Phase Modular AMI Meter

Specification

Accuracy Real-time Clock


Active energy Class 1 (IEC62053-21) Real-time clock back-up Columnar battery, 3.6V lithium-ion battery
Reactive energy Class 2 (IEC62053-23) power supply capacity ≥1200mAh
After power failure, the battery can support
Impulse 1000 imp/kWh, 1000imp/kvarh clock working more than 10 years, two years
Voltage shelf time
Working voltage 0.6 to 1.2Un Time of Use
Maximum voltage Rate Multiple tariffs & Time-of-Use (TOU) billing
500V (48 hours)
(8 tariffs, 24 time intervals,
Short-time withstand 16 daily tariffs, 2 weekly tariffs,
over-voltage (1 minute) 600V AC
12 seasonal tariffs, 50 holiday tariffs)
Nominal voltage 220V; 230V; 240V Special days Up to 200 programmable special days
Frequency 50Hz±5Hz Communication
Current Infrared communication IEC62056-21 mode C
Rated current 5A Communication module Hot swap modules GPRS/3G/NB-IoT cellular
modem, PLC, RF, M-Bus
Maximum current 100A
Versatile RS-232/485 universal serial communications port
Over-current in short time 30Imax (up to115,200 bps)
Limit current for accurate metering 1.2×Imax Communication protocols DLMS/COSEM
Meter Operation M-BUS interface to water, Wired M-Bus is based on the EN 13757-2 or
Power consumption Voltage circuit: gas and heat meter wireless M-Bus is based on the EN 13757-4
<2.0W(or<7VA ) @220V Load Profile
Current circuit:
<0.2VA@Base Reference Current (Ib) 8 programmable channel and Interval
Number of channel and interval programmable from 1 minute to 60 minutes
Internal Relay
Capacity 8 channel time interval 15 minutes is 80 days
Current Unipolar bi-stable latching relay 120A
Load switch standard grade: Mechanical Specification
UC3 (IEC62055-31) Weight About 1020g
ON 3000A, 5000A to withstand short-circuit
current Protection class IP54, comply with IEC60529-4
Maximum switching power interrupting Dimension 210.0mm X 135.0mm X 65.0mm
device: 25000VA
Housing and terminal layout BS5685/DIN 43857
Electrical durability of 100A (COS =1, 0.5)
5000 hours Housing protection grade IP54 IEC60529-4
Input and Output Housing material Fire retardant, flame resistant, thermal
Meter impulse output LED, optoelectronic isolation deformation engineering plastic PC+GF
Inflaming retardant test comply with 960°C
Environmental Condition glow wire test requirement (IEC60695-2-1)
Working temperature range -25°C~+85°C Fire resistant test:UL94-V0 rated @1.5mm
Storage temperature range -40°C~+85°C No toxic gases emitted: green material
Humidity requirement Relative humidity range is 0~95% at maximum Terminal and Sealing
temperature of 55°C Terminals Terminals layout complies with BS5685/ DIN
During the night: 43857
100 % relative humidity(max) Two screws on the pressure-plate main terminal
During the day: The material is rust-proof
25 % relative humidity
Terminal material Fire retardant, flame resistant, anti-thermal
Used in region with altitude less than 3500m a.s.l.
deformation engineering plastic PC+20%GF
Lightning protection Built-in varistor protection can be applied to Flame retardant test:
protect from lightning pass 960°C glow wire test(IEC60695-2-1)
Altitude Less than 3500m a.s.l. Fire resistant test:UL94-V0 rated @1.5mm
No toxic gases emitted: green material
Real-time Clock
Real-time clock frequency Oscillator frequency 32.768kHz Sealing Six seals on meter:
1) Two seals on the top of meter for
Real-time clock accuracy ≤5ppm communication module
2) Two seals for terminal cover
3) Two manufacturer seals for meter cover
under terminal cover

www.inhemeter.com
Copyright © 2019 Inhemeter Co., Ltd. All rights reserved.

You might also like