Doc. No. 71120134 REV. 04 FEB.

2021
 Foreword
Dear Customer,
Congratulations on becoming the proud owner of a “Platina 100 BS VI / Platina 110 BS VI”, one
of the most value for money motorcycles in the country.
Your safety and the safety of others is extremely important. Hence, before you ride the bike,
please read this Owner's Manual carefully and familiarize yourself with the operating mechanism,
controls and maintenance requirements. This will ensure you a long and trouble free ownership
experience.
To keep your bike in perfect running condition and deliver consistent performance, we have
specially programmed the periodic maintenance services which includes 3 Free and subsequent
Paid services. We earnestly advise you to avail all these services at any of our Vehicle Dealers or
Authorised Service Dealers (ASD) as per the schedule contained in this booklet
Your ““Platina 100 BS VI / Platina 110 BS VI” comes with a warranty of 5 Years or 75,000
Kms. whichever occurs earlier from the date of sale. For details please refer to “Warranty: Scope
& Limits” given in this manual.
We urge you to entrust all your service needs to a Bajaj Dealer or Authorised Service Centers
only. They are well equipped with all necessary facilities / genuine parts / oil and trained
manpower will ensure the best care for your bike.
Should you require any additional information feel free to contact us on our helpline number or e-
mail us at: customerservice@bajajauto.co.in or visit the Bajaj Auto website www.bajajauto.com
Thank you for choosing a Bajaj “Platina” & wish you unlimited miles of happy riding!!
SERVICE DEPARTMENT
BAJAJ AUTO LIMITED
 Table of Contents
Description Safety and Warning information :
1. Technical Specifications....................................... 1
2. Identification Data- (Frame Number & Engine Warning : This indicates that a potential
Number) ............................................................... 4 hazard or injury to you or other persons &
3. Location of Parts.................................................. 5 to the vehicle can happen if advice
4. Steering/Ignition lock, Tank Cap / Fuel Tap...... 6 provided is not followed.
5. Speedometer Details............................................ 7
6. Control Switches..................................................10 Caution : This indicates that a potential
7. Removal & Fitment of Side Cover..................... 12 hazard that could result in vehicle
8. Removal & Fitment of Seat................................ 13 damage. Follow the Advice provided with
9. Location of Battery / Tool kit / First Aid Kit.....14 the caution.
10. Daily Safety Checks............................................ 15
11. How to ride your Bike........................................ 16
Notice:
12. Safe Riding Tips................................................. 20
13. Engine Oil............................................................ 21 The description and illustration in this booklet
14. Wheels - Tyre& Instructions for customer.........22
are not to be taken as binding on the
manufacturers. The essential features of the
15. Periodic Maintenance Information..................... 23
type described and illustrated herein remaining
16. Combined Braking System (CBS)..................... 25
unaltered. Bajaj Auto Limited reserves the
17. Free Service Guidelines...................................... 26 right to carry out at any moment without
18. Periodic Maintenance & Lubrication Chart....... 28 being obliged to bring this booklet upto-date
19. Non Use Maintenance........................................ 36 & to do modifications on the vehicle, parts or
20. Delivery Certificate.............................................. 37 accessories as may be convenient and
21. Warranty Scope & Limit..................................... 38 necessary.
22. Battery Warranty Card
Technical Specifications
Parameter Platina 100 ES & KS 4 Speed Platina 110 Disc-Drum / Drum-Drum 5 Speed
Engine 4 stroke, Natural air cooled 4 stroke, Natural air cooled
Bore x Stroke 47 mm x 58.8 mm 50 mm x 58.8 mm
Displacement 102 cc 115.45 cc
Idling Speed 1300 +/- 100 RPM 1300 +/- 100 RPM
Max. Net Power 7.9 PS @ 7500 RPM 8.6 PS @ 7000 RPM
Max. Net Torque 8.34 Nm @ 5500 RPM 9.81 Nm @ 5000 RPM
Ignition System DC DC
Starting Aid Kick & Self Kick & Self
Spark Plug (2 nos.) Champion or BOSCH Champion or BOSCH
Spark Plug Gap 0.7 to 0.8 mm 0.7 to 0.8 mm
Transmission 4 Speed (All down) 5 Speed (All down)
Lubrication Forced Lubrication Forced Lubrication
Front Brake Drum Disc / Drum
Rear Brake Drum Drum
Tyre Front
80/100-17, 46P, Tubeless 80/100-17, 46P, Tubeless

Tyre Rear 80/100-17, 53P, Tubeless 80/100-17, 53P, Tubeless

1
 Technical Specifications
Parameter Platina 100 ES & KS 4 Speed Platina 110 Disc-Drum / Drum-Drum 5 Speed
2
Front 1.75 kgf/cm (25 PSI) 1.75 kgf/cm2 (25 PSI)
Pressure
Tyre

2
Rear (Solo) 2 kgf/cm (28 PSI) 2 kgf/cm2 (28 PSI)
2
Rear (Pillion) 2.25 kgf/cm (32 PSI) 2.25 kgf/cm2 (32 PSI)
Length 2006 mm 2006 mm
Dimensions

Width 704 mm 741 mm / 729 mm

Height 1076 mm 1100 mm
Wheel base 1255 mm 1255 mm
Ground Clearance 200 mm 200 mm
Fuel Tank - Full 11 Liters 11 Liters
Fuel Tank - Reserve 2 Liters 2 Liters
Electrical System DC DC
Head Lamp 35/35W 35/35W
Position Lamp DRL DRL
Tail Lamp/Stop Lamp 5/10W 5/10W
Side Indicator 10W - 4 nos 10W - 4 nos
Horn 12V, 2A 12V, 2A

2
Technical Specifications
Parameter Platina 100 ES & KS 4 Speed Platina 110 Disc-Drum / Drum-Drum 5 Speed
Neutral Indicator 2W (Green) LED / 2W (Green)
Turn Signal Indicator 2W (Green) LED / 2W (Green)
Hi-Beam Indicator 2W (Blue) LED / 2W (Blue)
Speedometer Lamp 2W - 2 nos LCD / 2W - 2 nos
Malfunction Indicator 2W LED / 2W
Low Battery Indicator NA LCD / NA
Gear Indicator NA LCD / NA
Battery 12V 3 Ah VRLA 12V 3 Ah VRLA
Vehicle Kerb Weight 115.5 kg. - 100 KS Drum 122 kg. Disc-Drum
117 kg. - 100 ES Drum 119 kg. Drum-Drum
Vehicle Gross Weight 245.5 kg. - 100 KS Drum 252 kg. Disc-Drum
247 kg. - 100 ES Drum 249 kg. Drum-Drum

Note :
• All dimensions are under UNLADEN condition.
• Above information is subject to change without any notice.
• This vehicle complies to BS VI standards.
• Day Time Running Light (DRL) is as per Government regulation.
3
 Identification Data- (Frame Number & Engine Number)
The Frame and Engine serial numbers are used to register the motorcycle. They are the unique
alpha-numeric codes to identify your particular vehicle from others of the same model and type.

Engine Number Location

On LH Side Crankcase Near Gear
Change Lever (Alpha-Numeric - 11 Digits)

Frame Number Location

On Side of Steering Tube
(Alpha-Numeric - 17 Digits)

4
 Location of Parts
Day Time
Running Light
(DRL)
Grab Handle Rear Shock
Fuel Tank Cap Speedometer
absorber

Kick Lever Brake Lever

Tail Lamp
Front Fork

Silencer

Brake Pedal

Engine Oil
Level Window

5
 Steering cum Ignition Lock / Fuel Tank Cap / Fuel Tap

Steering cum Fuel Tank Cap Fuel Tap

Ignition Lock :
It has three positions.

LOCK: Steering locked. Ignition OFF.

Fuel Tank Cap
OFF: Steering unlock. Ignition OFF. • To open : Insert the key in the lock and turn
it clockwise and lift fuel tank cap.
ON: Steering unlock. Ignition ON. • ‘Fuel Tank Cap’ gets locked when pushed
back into the place.
To Lock the Steering : To lock the steering, • Don’t attach metallic ‘Key chain’ as it may
turn the handle bar to the left or right. Push damage paint of petrol tank.
the key inside & turn toward ‘LOCK’ position.
Match the lock position & turn key to ‘LOCK Fuel Tap
position. Lock the steering & remove the key. Fuel tap lever has following positions.
To Unlock the Steering : To unlock steering, ON : When fuel level is above
insert the key in steering cum ignition lock & reserve position.
turn it clockwise to “OFF” or “ON” position. RES : When fuel level is below
Key : A common key is used for ‘Steering reserve position.
cum Ignition lock’, ‘Fuel tank cap’ & ‘Side OFF : When fuel supply is to be cut
cover RH lock’. off.
6
 Speedometer Details-Platina 100 & Platina 110 Drum-Drum

4
1

2
5
6

3 7

1. Odometer : The Odometer shows the total 5. Hi Beam Indicator (Blue) : When Headlight
distance that the vehicle has accumulated. is ‘ON’ & Hi beam is selected, Hi beam
indicator will get ‘ON’.
2. Speedometer : The Speedometer pointer
shows the speed of vehicle. 6. Turn Signal Indicator (LH & RH) (Green) :
When Turn signal switch is turned to Left or
3. Neutral Indicator (Green) : When the
Right, Turn pilot indicator - LH or RH will
transmission is in Neutral & Ignition switch
flash.
‘ON’, the Neutral indicator will get ‘ON’.
7. Malfunction Indicator ( ) : It glows
4. Fuel Level Indicator : Fuel level indicator
whenever any abnormality is noticed in
shows approximate available fuel in fuel
functioning of Ignition / BS VI carburettor
tank.
components.

7
 Digital Speedometer - Platina 110 Disc-Drum
5 functioning of Ignition / BS VI carburettor
1 6
components.
7. Low Battery : It indicates battery needs
2 7
charging.
8
3 S
9
8. Set Button : It is used to reset trip meter and
4 10
clock setting.
9. Low Fuel Indicator : It glows when fuel level
11
is 3 bars & blinks if fuel level is 2 bar or less.
12 10.Fuel Level Indicator : Shows approximate
13
available fuel in fuel tank in bars.
14 11. Clock : It shows time in HH:MM, 12 hour
format with AM & PM.
12. Service Reminder : Icon of Spanner glows if
1. Neutral Indicator : When the transmission is
Odometer reading reaches 450km, 4450 km,
in Neutral & Ignition switch ‘ON’, the Neutral 9450 km, 14450 km & so on after every 5000
indicator will get ‘ON’. kms upto 999450 kms. Bring the vehicle to
2. Turn Signal Indicator (LH & RH) : When Turn authorised Bajaj Dealership. It continues the
signal switch is turned to Left or Right, Turn same sequence after roll over.
pilot indicator - LH or RH will flash. 13. Gear Indication : Its having 1,2,3,4,H,N
3. Speedometer : The Speedometer pointer symbols. (H means hyper economy). These
shows the speed of vehicle. symbols will blink as per programmed
4. Odometer : The Odometer shows the total Engine RPM & vehicle speed in km/hr. Up
distance that the vehicle has traveled. arrow & Down arrow will remind rider for up
5. Hi Beam Indicator : When Headlight is ‘ON’ shifting or down shifting of gears.
& Hi beam is selected, Hi beam indicator will 14. Trip Meter :The Trip meter shows distance
get ‘ON’. traveled since it was last reset to zero.
6. Malfunction Indicator ( ) : It glows
whenever any abnormality is noticed in 8
 Digital Speedometer Details - Trip meter & Clock Setting
1. Trip Meter Reset : To reset Trip meter follow Action Result
the below given steps. Press SET button for less Increase in hour digit.
than 2 sec
• Press SET button for less than 1 sec.
Press SET button continuously Speedy increase in hour digits
• Mode changes ODO-TRIP-ODO No action for less than 5 sec Hour digit will save & minute
• Select ‘Trip’ & press SET button for more than digit start blinking for updation.
3 sec but less than 6 sec. Press SET button for less Increase in minute digit.
than 2 sec
2. Clock Setting :To reset Trip meter follow the
Press SET button continuously Speedy increase in minute digits
below given steps.
No action for less than 5 sec Minute digit will save & am / pm
• Press SET button for less than 1 sec. start blinking.
• Mode changes ODO-TRIP-ODO No action after entering clock • Auto exit without saving set
• Select ‘ODO’ & press SET button for more mode for more than 10 sec value. (: start blinking & digits

than 7 sec to enter clock setting mode. stop blinking)

• If speed input is given, then also
• ‘:’ stop blinking & Hour digit start blinking.
auto exit without saving set value.

9
 Control Switches (LH)

D
A

Left Handle Bar Switches To stop flashing, press the switch IN.
A. Hi / Lo Beam Switch : When headlight is C. Horn Switch : ( ) Press horn switch for
ON, High or Low beam can be selected sounding horn.
with the Hi / Lo switch. Hi beam indicator
light in speedo console will glow when D. Pass Switch : ( ) Press the switch to
high beam is selected. flash the head light in hi beam mode. It is
used to give signal to vehicles coming
: High Beam : Low beam from opposite side while overtaking.
B. Turn Signal Switch: When the turn signal
switch is turned to Left ( ) or Right ( ),
corresponding turn signals flash on & off.

10
 Control Switches (RH)
Day Time Running Light Feature :
F • Day Running light is provided above
headlamp. (as applicable to model)
• Day running light gets ON (High intensity)
when ignition switch turned to ON position.
• After headlight is turned to ON position,
intensity of DRL LED’s will get reduced.

Right Handle Bar Switch Day Time

E. Starter Button : It operates the electric Running Light
starter when clutch lever is depressed with (DRL)
transmission in any gear. It is
recommended to start engine with
transmission in neutral.
F. Head Light Switch : It has 2 positions.
:.All lamps 'OFF'. DRL ON (High Intensity) Igntion Light DRL Head
Switch Switch Light
: Head lamp, Tail lamp, & Speedometer
lamps will glow. D R L r e m a i n s O N ON OFF ON High Intensity OFF
(Low intensity)
ON ON ON Low Intensity ON
11
 Removal & Fitment of Side Cover RH

E
D
B
C

A F
I G
H

Removal of Side Cover RH Fitment of Side Cover RH

• Insert the key into the cover lock (A) and • Match rear side (D) of ‘Side Cover’ lug
turn the key clockwise. with hole (E) provided on ‘Seat Cowl’ &
slide ‘Side Cover’.
• Hold cover with both hands & pull front
• Match Lug (F) provided on front side of
side first (B) & Slide rear side (C) towards
‘Side Cover’ with hole provided on ‘Fuel
front wheel side.
Tank’ (G) and press ‘Side Cover’ inside.
• Take out ‘Side cover’. • Match the ‘Side Cover’ lock (H) properly
with hole provided on ‘Chassis’ (I) & Lock
(A) the ‘Side Cover’.
CAUTION : Remove side cover as
CAUTION : Fit side cover as described
described above, Otherwise the lugs may
above to ensure proper fitment.
break.
12
 Removal & Fitment of Seat

3
A 1

Fig. A Fig. B Fig. C

Removal of Seat Fitment of Seat

• Remove ‘Side Cover’ RH. • Match & insert the bracket ('1' of Fig. 'B')
• Pull the ‘Seat Release Cable’ (A) to release of seat with slot ('2' of Fig. 'B') provided
seat lock. below fuel tank rear mounting on chassis.
• Keeping cable pulled, lift the seat from • Push seat towards fuel tank and align lock
rear end and slide it towards tail lamp to rod ('3’ of Fig.'C') & seat lock ('4' of Fig.
remove it. ‘C').
• Then press the seat in middle from top to
lock it.

13
 Location of Battery / Tool Kit / First Aid Kit

Tool Kit

First Aid Kit

Battery

Battery Tool Kit

• It is located below seat assembly. • It is clamped below seat by rubber strap.
• Make of battery may be differ from vehicle • A rubber strap is provided to hold tool kit.
to vehicle. First Aid Kit
• It is located below seat on rear fender as
shown in figure.

CAUTION : Do not drive/run vehicle in

battery disconnected condition. It may CAUTION : Always fit rubber strap to
lead to damage of electrical / electronic hold the tool kit securely.
components. Loose tool kit would cause rattling noise.
14
 Daily Safety Checks
Before riding motorcycle be sure to check • Front brake lever free play - 2 to 3 mm.
following items. Please give proper importance applicable for drum brake vehicles, Not
to these checks and perform all of them applicable for disc brake vehicles.
before riding motorcycle.
• Rear brake pedal free play- 20 to 30 mm.
If any irregularities are found during these
checks, refer to the Maintenance chapter & • Wear lining Indicator within usable range.
see your dealer for the action required to No brake dragging, applicable to drum
return the motorcycle to a safe operating brake vehicles.
condition. • Drive Chain slack of 20 to 30 mm
adequately lubricated.
Warning : Failure to perform these
checks every day before you ride may • Function of all lights & horn
result in serious damage or severe • Clutch lever free play - 2 to 3 mm
accident.
• Smooth steering movement without
• Enough fuel level for planned distance of restriction.
journey. No fuel leakage in fuel lines. • Both stand return to their fully up position.
• Engine oil level (between upper and lower • Correct inflation pressure in both tyres
level mark) Adequate tyre tread depth - no cracks /
• Throttle cable free play of 2 to 3 mm. cuts.
Smooth operation and positive return to • Correct rear viewing span adjustment of
closed position. mirror.

15
 How to Ride Your Bike
Starting The Engine : This vehicle is equipped with BS VI
• Turn the fuel tap knob to or position. carburettor having Auto choke.
• Turn ignition switch key to ‘ ’ position. The control unit operates ON / OFF function
of Auto Choke. No manual operation is
• Confirm that transmission is in neutral.
required.
• Keep throttle completely closed, operate Auto choke ensures smooth starting of
self start button or apply kick to start the engine in all weather conditions.
engine.
• Release kick as soon as engine starts.

Auto
Note : Before starting the engine, in ignition choke
key off condition, press the clutch lever &
operate kick lever all the way down for 5-6
times. Then release the clutch lever.
This practice ensures lubrication of clutch
components for their longer life.
BS VI Carburettor

Note : Do not touch / distrub setting of idling & air screw provided on BS VI carburettor. For any performance
related issue, take the vehicle to BAL authorised workshop.

16
 How to Ride Your Bike
Shifting Gears : Recommended Speed for Shifting Down
Platina 110 Disc-Drum / Drum-Drum
• Close throttle & depress the clutch.
Gear Speed
• Shift into next higher or lower gear.
• Open the throttle and release the clutch
th th
From 5 to 4 Gear 21 km/hr
lever slowly and simultaneously. th rd
From 4 to 3 Gear 17 km/hr

Gear Shifting Pattern Gear Shifting Lever rd nd

From 3 to 2 Gear 14 km/hr

N
1
From 2nd to 1st Gear 11 km/hr
2
3
4
Warning : When shifting down to lower
All Down All Down gear, do not shift at such high speed that
engine rpm jumps excessively. This may
Platina 100, Platina 110
Platina 110 5 speed cause engine damage, & rear wheel may
4 speed skid. Downshifting should be done at
recommended speeds as shown in table.
Recommended Speed for Shifting Down-
Platina 100 ES & KS Braking :
Gear Speed • Close the throttle completely, leaving the
clutch engaged (except where shifting gears)
From 4 to 3 Gear th rd
24 ~ 30 km/hr so that the engine braking will help slow
down the motorcycle.
From 3 to 2 Gear rd nd
18 ~ 23 km/hr • Shift down one gear at a time so that you are
in Neutral when you come to a complete stop.
From 2nd to 1st Gear 13 ~ 16 km/hr
17
 How to Ride Your Bike
• When stopping, always apply both brakes at Running IN
the same time. De-clutch as necessary to Proper running-in is important for the better
avoid engine stalling. life & trouble free performance of the vehicle.
• Never lock the brakes, or it will cause the
tyres to skid. When cornering, use brakes • During first 2000 kms running-in period do
judiciously & do not de-clutch. Reduce your not exceed following speed limits.
speed before you get into the corner. For Platina 100 ES & KS
emergency braking, disregard downshifting,
and concentrate on applying brakes as hard Kms 1st 2nd 3rd 4th
as possible without skidding. 0 - 1000 10 20 30 40
1000 - 2000 15 30 40 45
Stopping the Vehicle :
Platina 110 Disc-Drum / Drum-Drum
• Close the throttle completely.
• Shift the transmission into neutral. Kms 1st 2nd 3rd 4th 5th
• Bring the vehicle to complete stop. 0 - 1000 10 20 30 35 45
• Turn the ignition switch off. 1000 - 2000 15 30 40 45 55

• Always keep the speed below the limits

Parking the Vehicle : mentioned in the table.
• Support the motorcycle on a firm level • Do not race the engine excessively.
surface with the center or side stand.
• Do not start moving or race the engine
• Lock the steering. immediately after starting. Run the engine
for a minute at idle speed to give the oil a
CAUTION : Do not park on a soft or steeply chance to workup into the engine.
inclined surface or the motorcycle may fall over.
18
 How to Ride Your Bike
Fuel Saving Tips : Optimum shifting speeds for best mileage for analogue speedometer
A well maintained vehicle and good driving can Gears 4 Speed Vehicle 5 Speed Vehicle
contribute a lot to the saving of petrol.
1st gear 0 Km/hr 0 Km/hr
• Ride smoothly and steadily at an optimum driving
2nd gear 16 ~ 19 Km/hr 10 ~ 13 km/hr
speed of 40 to 50 Km/hr to get best mileage. 17 ~ 20 km/hr
3rd gear 28 ~ 34 Km/hr
• Avoid harsh braking. 4th gear 40 ~ 48 Km/hr 24 ~ 27 km/hr
• Change the gear judiciously according to the speed 5th gear NA 31 ~ 35 km/hr
and load requirement. *For Digital speedometer recommended as displayed on
• Don’t overload the vehicle above the specified speedometer console
payload.
Ensure following maintenance points to get optimum
• Use the accelerator judiciously. For maximum life of
performance from your bike.
engine, never use hard acceleration when engine is
cold Fuel Check fuel lines & connections for leakage.
• Cut off the engine if you want to stop for more than Spark Plug Inspect and clean spark plug. Adjust
two minutes. electrode gap. Replace spark plug as per
• In cold condition, kick start to be preferred for longer P.M. Chart.
one way clutch life Air Filter Clean air filter element periodically. Replace
How to check mileage (Fuel efficiency) as per Periodic Maintenance Chart.
Best way to calculate mileage is by following the full Engine Oil Check engine oil level. Always use
tank to full tank method. recommended grade and quantity.
• Fill way tank full up to small mouth (brim). Brakes Ensure that the brakes are not dragging /
• Run the bike for say 100 km. binding.
• Fill the tank full again in same fuel filling station, Clutch Ensure correct clutch lever play.
probably with same fuel dispenser. Tyre Air Always maintain recommended
• Divide kilometer run / fuel quantity filled. Pressure tyre pressure.
Carburettor Clean float chamber bowl of the carburettor.
19
 Safe Riding Tips
• Always wear Helmet while driving or riding. Your helmet • It is suggested to customer to take appropriate care
should conform to Indian standards. in area of heavy monsoon or high rainfall area. The
• Read thoroughly the instructions given in this manual appropriate surface preventive coat to avoid rusting /
and follow them carefully. poor surface finish on account of adverse atmospheric
• Avoid unnecessary accessories for the safety of both conditions.
rider and other motorists. • Always carry vehicle registration & insurance papers,
• Get familiar and follow traffic rules & regulations in your and a valid driving licence with you.
states as well as general traffic signs. General Maintenance Tips :
• Familiarise yourself well with starting, acceleration and • Vehicle cleaning to be done with soft & clean wet
braking of the vehicle. cloth to avoid scratches on painted parts.
• When applying the brakes, use both front & rear brakes • Clean & lubricate all the important parts as detailed in
simultaneously. Applying only one brake may cause the a periodic maintenance chart.
vehicle to loose control. • Do not apply direct water jet on painted, electrical /
• Riding at proper speed, avoiding unnecessary electronic parts.
acceleration and braking are important safety, fuel • Do not obstruct engine cooling by adding mud
consumption and longer life of the vehicle. protection sheet from front
• During monsoon, drive vehicle more cautiously. • Drive cautiously. Start early & reach your destination
Remember vehicle skid more easily during light showers. safely.
• Keep both hands firmly on handle bar & both feet • Avoid driving on loose sand or stones where vehicle
securely on rider footrest. Do not take away both hands is likely to skid.
& / or feet from resting area as this is very unsafe. • Properly wrap-up loose clothes while driving or riding
• Do not use mobile phones while riding as it could lead to avoid entangling in wheel or other objects on road.
to fatal accident. • Always concentrate on riding for safety.

20
 Engine Oil
A: Oil Recommended Engine Oil:
Filler Cap
Always insist on Bajaj Genuine Engine Oil for
optimum engine performance and warranty benefits. It
A B: Oil Level
is a specially formulated oil for vehicles with DTS-i
Inspection
Window
engines.

C Model Recommended Grade

Engine oil
B
D
Platina Bajaj DTS-i 10000 10W30
BS6 Compliant JASO MA2 API SN

Engine Oil Level Checking : • Engine oil replacement frequency : 1st service & then
• Check engine oil level every day. Park every 10,000 Km.
vehicle on level surface on center stand. • Engine oil level top-up frequency : Every 5000 km.
• Check oil level through oil level gauge ‘B’. • For all BS6 vehicles, BS6 compliant engine oil is to be
• Always maintain engine oil level between used only. Use of BS6 compliant engine oil will give
upper (C) and lower (D) mark provided on prolonged life of catalytic converter.
Cover RH. Top up with specified grade of
oil if the oil level is below lower level mark. CAUTION :
• It is most important to adhere to
Engine Oil Capacity recommended grade & frequency of oil
Model Platina change for the purpose of long life of
critical engine components. For details
Refill 1000 ml
refer periodic maintenance chart.
During Overhaul 1100 ml • Do not reuse drained oil.
21
 Wheels - Tyre Pressure, & Instructions for customer
• Tyre warranty is settled by tyre manufacturer.
• Decision is taken based on tyre wear and
running of vehicle.
• BAL settles tyre warranty only for imported
tyres.

Instructions for customer

• Do Not rev engine in standstill condition.
Use the recommended levers while removing
the Tyre / Tube for puncture work. This will • Don't use adulterated fuel or fuel additives as it
avoid any damages to the edges / scratches will result in rusting & clogging of engine parts.
on paint of the wheel.
• Never drive by disconnecting wheel speed sensor.
Tyre Pressure :
• Cleaning cloth to be strapped
Keep appropriate tyre pressure as mentioned
below to increase life of the tyre & for better along with toolkit under seat
fuel consumption.
assy as shown in image.
Front 1.75 kgf/cm2 (25 PSI) • Do not keep the cleaning cloth
Rear(Solo) 2 kgf/cm2 (28 PSI)
Rear (with Pillion) 2.25 kgf/cm2 (32 PSI) in the vicinity of high temperature zone e.g.
Engine, Silencer Assembly, Catalytic
Note : Incase the motorcycle is fitted with
imported tyres. compliance to respective indian convertor, Starter motor, etc.
standard & central motor vehicle rules has been
ensured.
22
 Periodic Maintenance Information-Battery
• When battery is found discharged, it is
advised to get it charged immediately.
• Environment care must be taken to dispose
off used battery. It is always recommended
to hand over the same to Authorised battery
- + / Bajaj dealer for proper disposal.
How to keep battery healthy ?
• Switch ‘Off’ ignition when engine is not
running. Get battery checked / charged
during periodic services.
3 Ah VRLA Battery • Do not add extra electrical accessories
Battery : such as-Remote, bigger horn, musical
• Battery is located below seat assembly. brake light etc. This will reduce the life of
• Warranty on Battery from the date of battery
purchase of vehicle. • If vehicle is to be stored for more than 2
12V 3 Ah VRLA : 18 months weeks disconnect battery to avoids self
• Battery make may be differ on vehicle to
discharge.
vehicle.
12V 3Ah VRLA - Battery Features CAUTION : While disconnecting always
• No topping-up is required disconnect negative (-ve) cable first. While
refitting always connect positive (+ve) cable first.
• Reduced self discharge, Enhance safety.
• No vent tube open to atmosphere hence no
discharge of electrolyte through vent tube.

23
 Periodic Maintenance Information-Spark Plug, Drive Chain

Spark Plug
• Remove spark
plug by using plug
spanner.
• Clean spark plug.
0.7 to • Adjust the gaps if
0.8 mm
incorrect by
bending outer Drive Chain Cleaning Drive Chain Lubrication
electrode carefully.
Drive chain must be cleaned & lubricated as per
Drive Chain Std. Chain slackness : periodic maintenance schedule.
Slackness 20~30 mm Drive Chain (Non sealed type)
• Chain top edge • Non sealed type chain should be removed &
to be kept cleaned by Nylon brush & Kerosene / diesel in
between two
marks during chain cleaning stand.
chain slackness • It should be lubricated by SAE 90 grade oil.
adjustment.
• Chain slackness to be adjusted whenever
required.
• Std. Chain slackness : 20 ~ 30 mm
• Marking on chain adjusters should be
identically positioned on both sides.
24
 Combined Braking system (CBS) Drum - Drum

D Lever brake cam

dot mark
A

Brake cam dot mark

Distance ‘C’
(should be 0-1 mm)
B

CBS Working :
• When front brake lever is pressed, then only front brake will get applied.
• When Rear brake pedal is pressed then both Rear and Front brake are applied, however it is
recommended to use both brakes simultaneously for best braking performance
Brake setting guideline in case rear wheel puncture and repair done at road side garage.
• Adjust rear brake free play by tightening force distribution unit ‘A’ (Similar procedure followed for
Non CBS vehicle). After adjustment ensure gap between CBS front brake cable 2 (B) sleeve &
cam lever slot (Distance C) and do not over tighten adjuster nut (D).
• It is recommended to do setting as per guideline mentioned at authorised dealership after rear /
front wheel puncture, rear / front brake shoe replacement, CBS cable replacement, higher brake
free play at rear / front, chain play adjustment, tyre refitting, etc.
Note : For CBS setting of Disc-Drum vehicles, bring the vehicle to BAL authorised workshop only.
25
Free Service Guidelines
Instruction to avail Free Service through
Digitized Free Service Coupon Periodic Service Criteria
Please follow following procedure : -
Service Days Kms
• Please provide your mobile number to Dealer at 1st Free
the time of buying of new Bajaj Vehicle. Service 30~45 500~750

2nd Free

whichever occurs earlier

• In case of change in mobile number, please Service 240 4500~5000
update to Dealer / ASD.
3rd Free
Service 360 9500~10000
• When you are at Dealership / ASD workshop for
availing Free Service, you will receive the
‘Unique Coupon Number’ (UCN) through SMS in
your mobile.
120 Days Every
Subsequent
from 5000 Km
• Please inform the UCN to Dealer / ASD at the Paid services
last Service after previous
time of Free Service. service
(ASD-Authorised Service Dealer)

Availing all Free / Paid Services, replacing mandatory periodic parts & engine oil will entitle warranty eligibility.

26
Periodic Maintenance & Lubrication Chart

Recommended frequency - Service interval & Kms

1st 2nd 3rd
Sr. Activities / Check Servicing 4th 5th 6th 7th
(Free) (Free) (Free)
No. points
500 4500 9500 14500 19500 24500 29500
KMS ~ ~ ~ ~ ~ ~ ~
750 5000 10000 15000 20000 25000 30000
1. Servicing with water wash        
2. Engine oil (Bajaj DTSI 10000 oil) Top-up,R R Top-up R Top-up R Top-up R

3. Engine oil Filter R R R R R

4. Oil strainer CL CL CL CL CL
Air cleaner element** & air lter cover ‘O’
5. ring. Drain tube cleaning. CL CL CL CL R CL CL R
6. Fuel cock sediment bowl cleaning** CL CL CL
7. Fuel pipes for cracks. C,R C C C R C C R
8. Spark plug clean & check gap CL,A,R CL,A CL,A R
9. Valve tappet clearance C, A C, A C, A C, A C, A C, A C, A C, A
10. Carburettor oat chamber cleaning** CL CL CL

Carburettor rubber duct (Sleeve) for hard

11. C,R C,R C,R C,R C,R
resulting in loose tment.
12. Engine breather tube for cracks. C,R C,R C,R C,R C,R C,R
13. EVAP system Hoses- check for cracks C,R C,R C,R C,R C,R C,R C,R C,R
28
Periodic Maintenance & Lubrication Chart

8th 9th 10th 11th 12th 13th 14th 15th 16th

Remarks
34500 39500 44500 49500 54500 59500 64500 69500 74500
~ ~ ~ ~ ~ ~ ~ ~ ~
35000 40000 45000 50000 55000 60000 65000 70000 75000
Ensure to prevent water entry in Petrol tank, Silencer &
         electrical parts. Use caustic free detergent for washing.
Top-up R Top-up R Top-up R Top-up R Top-up Use BGO 10W30 BS6 Oil level window cleaning at every
10000 kms by petrol spray & nylon brush
R R R R Replace oil lter in 1st service & at every 10000
Kms
CL CL CL CL Oil strainer cleaning at the time of oil change.
Replace Air lter element at every 15000kms
CL CL R CL CL R CL CL R Replace air lter cover O ring along with lter element.
CL CL CL
C C R C C R C C R Replace at every 15000 Kms.
CL,A CL,A R CL,A Replace at every 30000 Kms.
C, A C, A C, A C, A C, A C, A C, A C, A C, A
CL CL CL

C,R C,R C,R C,R C,R C,R C,R C,R C,R Replace if required

C,R C,R C,R C,R C,R C,R C,R C,R C,R Replace if required
C,R C,R C,R C,R C,R C,R C,R C,R C,R Drain EVAP "Y" connection drain tube.Replace if found cut/damaged

29
Periodic Maintenance & Lubrication Chart

Recommended frequency - Service interval & Kms

1st 2nd 3rd
Sr. Activities / Check Servicing 4th 5th 6th 7th
(Free) (Free) (Free)
No. points
500 4500 9500 14500 19500 24500 29500
KMS ~ ~ ~ ~ ~ ~ ~
750 5000 10000 15000 20000 25000 30000
14. Engine foundation silent bushes for cracks C,R C,R C,R C,R
15. Silencer drain hole cleaning CL CL CL CL CL CL
Wiring harness connections, routine & Conduit /
16. PVC sleeve inspection. C,A,T C,A,T C,A,T C,A,T C,A,T C,A,T C,A,T C,A,T

Battery , connections & health by load tester. +ve

17. terminal cap tment. C,A,L,T C,A,L,T C,A,L,T C,A,L,T C,A,L,T C,A,L,T C,A,L,T C,A,L,T

18. Ignition switch contacts cleaning CL,L CL,L CL,L CL,L CL,L CL,L
19. HT coil connections (Primary and Secondary) C,T C,T C,T C,T C,T C,T C,T
20. Starter motor & starter relay connections C,T C,T C,T C,T C,T C,T C,T
Check fault code, Clear fault history, Update
21. latest hex le if applicable C C C C C C C C

Non- sealed Drive chain wear**- Clean,

22. Lubricate & adjust. Replace if required CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A

23. Drive chain link lock R R

24. Main stand & side stand both pivot pin C,L C,L
25. Steering play C,A C,A C,A C,A C,A C,A C,A C,A
Steering stem bearing & Cap steering bearing
26. (Plastic)**
C,CL,L C,CL,L C,CL,L C,CL,L

27. Front fork oil & seal C,R C,R C,R C,R C,R C,R C,R R

30
Periodic Maintenance & Lubrication Chart

Recommended frequency - Service interval & Kms

8th 9th 10th 11th 12th 13th 14th 15th 16th

Remarks
34500 39500 44500 49500 54500 59500 64500 69500 74500
~ ~ ~ ~ ~ ~ ~ ~ ~
35000 40000 45000 50000 55000 60000 65000 70000 75000
C,R C,R C,R C,R Replace if required
CL CL CL CL CL CL CL CL CL
Damaged conduit / PVC sleeves protection by
C,A,T C,A,T C,A,T C,A,T C,A,T C,A,T C,A,T C,A,T C,A,T
applying electrical tape lm
C,A,L,T C,A,L,T C,A,L,T C,A,L,T C,A,L,T C,A,L,T C,A,L,T C,A,L,T C,A,L,T
Apply petroleum jelly on battery terminals
Use Midronics battery tester.
CL,L CL,L CL,L CL,L CL,L CL,L CL,L CL,L CL,L Use recommended WD40 spray
C,T C,T C,T C,T C,T C,T C,T C,T C,T
C,T C,T C,T C,T C,T C,T C,T C,T C,T

C C C C C C C C C

During 1st Free Service :Use lint free cloth for cleaning & SAE
90 oil for lubrication without removing from vehicle .
CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A CL,L,A
During all other services: Remove, Clean by Diesel &
Lubricate using molten chain grease.
R R Replace at every 20000 Kms.
C,L C,L Use recommended AP grease.
C,A C,A C,A C,A C,A C,A C,A C,A C,A

C,CL,L C,CL,L C,CL,L C,CL,L

Replace if required.Use Limoplex grease for
lubrication
C,R C,R C,R C,R C,R R C,R C,R C,R Replace oil and oil seal + dust seal in pair at every 30000kms

31
Periodic Maintenance & Lubrication Chart

Recommended frequency - Service interval & Kms

1st 2nd 3rd
Sr. Activities / Check Servicing 4th 5th 6th 7th
(Free) (Free) (Free)
No. points
500 4500 9500 14500 19500 24500 29500
KMS ~ ~ ~ ~ ~ ~ ~
750 5000 10000 15000 20000 25000 30000
30. Brake shoes (Front* / Rear*) and brake pad C,R C,R C,R C,R R C,R C,R R
(Front) for wear limit. (*Drum brake)
31. Brake cam Front* / Rear* (*Drum brake) CL,L CL,L CL,L CL,L CL,L CL,L CL,L

1. Check source of leakages if any in the brake

system,
32. 2. Check Front brake hose condition, C,A,R C,A,R C,A,R C,A,R C,A,R C,A,R C,A,R R

3. Check Brake uid level and top up, if needed.

33. Rear sprocket fasteners for looseness. C,T C,T C,T C,T C,T
34. Rear wheel rubber shock dampers for excess play. C,R C,R C,R C,R

35. Fairing & windshield well nuts for rubber cracks C,R C,R C,R C,R C,R C,R

36. All cables free play adjustment C,A C,A C,A C,A C,A C,A C,A C,A

37. Head light focus adjustment C,A C,A C,A C,A C,A C,A C,A C,A

38. Check & conrm all bulbs / switches working. C,A C,A C,A C,A C,A C,A C,A C,A
General lubrication – Clutch lever / front brake
39. lever & kick lever, L L L L L L L L

40. Tyre air pressure. C,A C,A C,A C,A C,A C,A C,A C,A
41. Mirror position & joint rmness. C,A C,A C,A C,A C,A C,A C,A C,A

32
Periodic Maintenance & Lubrication Chart

Recommended frequency - Service interval & Kms

8th 9th 10th 11th 12th 13th 14th 15th 16th

Remarks
34500 39500 44500 49500 54500 59500 64500 69500 74500
~ ~ ~ ~ ~ ~ ~ ~ ~
35000 40000 45000 50000 55000 60000 65000 70000 75000

C,R C,R R C,R C,R R C,R C,R R Replace at every 15000 Kms
CL,L CL,L CL,L CL,L CL,L CL,L CL,L CL,L CL,L Use AP grease.

Check & Top up DOT4 brake oil in every service.

C,A,R C,A,R C,A,R C,A,R C,A,R R C,A,R C,A,R C,A,R Replace brake oil & Master / Caliper seals at every
30000 kms.

C,T C,T C,T C,T Use model wise torque values.

C,R C,R C,R C,R Replace rear wheel rubber shock damper if required
C,R C,R C,R C,R C,R C,R C,R C,R C,R Replace if rubber found cracked
C,A C,A C,A C,A C,A C,A C,A C,A C,A Replace cables if operation found hard.
C,A C,A C,A C,A C,A C,A C,A C,A C,A
C,A C,A C,A C,A C,A C,A C,A C,A C,A

L L L L L L L L L Use recommended AP grease.

C,A C,A C,A C,A C,A C,A C,A C,A C,A Ensure model wise tyre air pressure.
C,A C,A C,A C,A C,A C,A C,A C,A C,A

33
 Periodic Maintenance & Lubrication Chart

Recommended frequency - Service interval & Kms

1st 2nd 3rd
Sr. Activities / Check Servicing 4th 5th 6th 7th
(Free) (Free) (Free)
No. points
500 4500 9500 14500 19500 24500 29500
KMS ~ ~ ~ ~ ~ ~ ~
750 5000 10000 15000 20000 25000 30000

All fasteners tightness,

41. few are, Front & rear axle,Swing arm axle,Engine C,T C,T C,T C,T C,T C,T C,T C,T
foundation, Rider foot rest,Pillion stay

*** More frequent cleaning may be required while driving in dusty environment.
C : Check, A : Adjust, CL : Clean, R : Replace, T : Tighten, L : Lubricate
Note : Periodic parts, Oil, Filters, All types of greases, Cleaning agents, Cables, Wear & tear parts, Rubber ‘O’ rings / oil
seals / pipes, Gaskets to be replaced as per Periodic Maintenance and Lubrication Chart are mandatory and the same
are chargeable to customer.

34
Periodic Maintenance & Lubrication Chart

Recommended frequency - Service interval & Kms

8th 9th 10th 11th 12th 13th 14th 15th 16th

Remarks
34500 39500 44500 49500 54500 59500 64500 69500 74500
~ ~ ~ ~ ~ ~ ~ ~ ~
35000 40000 45000 50000 55000 60000 65000 70000 75000

C,T C,T C,T C,T C,T C,T C,T C,T C,T Use model wise torque values.

26
35
 Non-Use Maintenance
Non-use maintenance is necessary if a vehicle wheels.
remains off road for a longer duration (more • Do not apply oil on front brake disc, to
than 15 days**). The correct and careful non- prevent rusting. If the front brake disc rusts
use maintenance carried out before storing during storage, do not attempt to clean it
the vehicle will prevent the vehicle from with soap water. The rust will go off
rusting and from such other non-operational automatically during first few application of
damages like fire hazards. brake.
• Clean the entire vehicle thoroughly. ** For Battery :
• Empty the fuel from the fuel tank and a. Remove battery and keep it on wooden
carburettor float bowl (if fuel is left in for a plank, in properly ventilated area.
longer time, the fuel will break and gummy b. Before taking the vehicle for use.
substance could clog the carburettor). • Get the battery recharged from the
• Remove spark plug & put several drops of Authorised Service Center / Battery Dealer.
engine oil into the cylinder. Kick engine • Apply petroleum jelly on battery terminals.
over slowly a few times to coat cylinder
wall with oil & install back spark plug. Preparation for regular use after storage :
• Set the vehicle on a box or a stand so that • Follow daily safety checks.
both wheels are raised off the ground.
• Spray oil on all unpainted metal surfaces to
prevent rusting. Avoid getting oil on rubber
parts or brake liners.
• Cover entire vehicle neatly. Make sure that
storage area is well ventilated & free from
any source of flames or spark.
• Fill 10% excess air pressure in both
36
 Delivery Certificate
FRAME NO. :

ENGINE NO. : Sold on.:

Customer’s Name Mr/Mrs/Miss :

Address : Contact No.:

I have taken possesion of motorcycle along with the following items.

1. Owner's Manual 5. Standard Accessories

2. 2 nos of key 6. Battery Make ___________ Sr. No. ____________
3. Set of tools 7. Tyre Fr Make ___________ Sr. No. ____________
4. First Aid Kit Rr Make ___________ Sr. No. ____________
The Vehicle has been delivered to my satisfaction & I have understood all terms and conditions of
warranty, service schedules & maintenance tips and shall abide by them.

Dealer Code :
Dealer Name :
Address :
Contact No. :
Customer's Signature (To be filled in by the dealer)
Imp - "Do not detach this page from Owner's Manual" 37
 Warranty : Scope & Limit
Bajaj Auto Limited provides the following warranty in though their dealer, however Bajaj Dealers will provide full
respect of the “Platina 100 BS VI / Platina 110 assistance in referring such claims with respective
BS VI” motorcycle manufactured by us. manufacturer.
Every possible care and precaution has been taken to Bajaj Auto Limited undertake no liability in the matter of
ensure quality in respect of the material & workmanship in consequential loss or damage caused due to the failure of
the vehicles manufactured by us. Bajaj Auto Limited will the parts. Delay, if any, at the repairing workshop in
repair or replace at their Authorised Workshops, free of carrying out repair to vehicle shall not be a ground for
charge, part or parts there of as may be found, on extending the warranty period, nor shall it give any right to
examination, to have manufacturing defect within a period the customer for claiming any compensation for damages.
of 5 Years or 75,000 Kms., whichever is earlier from Bajaj Auto Limited reserves the right either to repair or
the date of sale subject to fulfillment of conditions replace the defective parts.
stipulated in part A, B & C given here under Where a defective part can be replaced by part/s of
Note : Warranty is applicable for only first owner of alternative brand/s, which are normally used by Bajaj
vehicle. Auto Limited in the course of manufacture, Bajaj Auto
Limited reserves the right to carry out the replacement
Part A: by a part or parts of any such alternative brand/s.
Warranty claims in respect of such items like shock This warranty and any claim arising there,is subject to
absorbers, speedometers etc. though claimed through us, Pune jurisdiction only.
are subject to acceptance of the respective manufacturers.
In all such cases the decision of the respective Part B:
manufacturer will be final and binding. No claim for exchange or repair can be considered
Proprietory parts like tyres, tubes, battery are warranted by unless the customer :
their respective manufacturers and should be claimed on a. Ensures that immediately upon detection of the
them directly by the customer. Bajaj Auto Limited shall not defect, he approaches any nearest Authorised Bajaj
be Liable to replace them Vehicle Dealers & Recommended Authorised Service
Dealers with the concerned vehicle and enables him
38
 Warranty : Scope & Limit
to remove and despatch the part / parts attributing to Part C :
the manufacturing defect to the Company. Further this warranty is NOT applicable to :
b. Produces the Owner's Manual, in original, to enable 1. Normal maintenance operations like brake & clutch
that dealer to verify the details. adjustments, cleaning of fuel system, engine tune-up or
It must be expressly understood that claims forwarded such other adjustments.
directly to us by the owner / customer will not be 2. Parts subjected to normal wear & tear like Clutch
entertained at all and such defective part/parts thus Plates, Brake Shoes, Chain, Sprockets, Fork Oil Seal,
forwarded by them will lie at our factory at their own risk, Spark Plug, Control Cables, Brake Pads.
and this warranty shall not be enforceable.
3. Replacement of bulbs & rubber components like
To avail benefits of warranty, following are mandatory grommets, ‘O’ rings, bellows as well as filters,
1. Availing of Initial 3 Free Services without lapse. packings, gaskets, fasteners etc.
2. Availing paid services at subsequent 5000 kms. or
4. Painted parts. Only blistering or peeling off of paint film
120 days from last service whichever is earlier
are covered under warranty. Any defect arising out due
without any lapse. to external damages or due to usage of protective
3. Availing of all services at the Authorised Vehicle covers /additional protective coatings adverse
Dealers & Recommended Authorised Service Dealers. atmospheric conditions etc. are not allowed like under
4. Usage of only recommended engine oil warranty.
“Bajaj DTS-i 10000” at specified frequency for drain 5. All consumables like Engine oil, Fork oil, Brake Oil,
interval of 10,000 kms. & engine oil level top-up at Grease etc. are chargeable to customer.
5000 kms. 6. Any defect arising due to above consumables not
5. Replacing mandatory periodic parts such as air filter, changed as per scheduled or if used other than the
oil filter etc. as per periodic maintenance schedule. recommended one.
7. Never drive your bike through flooded roads or a
flooded patch, as damages to the engine parts due to
water entry is not covered under warranty.
39
 Warranty : Scope & Limit
8. All chrome plated parts are prone to rust or 12. Vehicles which are not being serviced at
corrosion in coastal area or in acidic environment or recommended dealers as per the service schedule
due to neglected cleaning etc. However chrome film described or which have not been operated or
peeling is covered under warranty in general maintained in accordance with the instructions
maintained in the Owner’s Manual.
atmospheric conditions. Blue/ Yellow colouration of
silencer near exhaust port is permissible and hence 13. Vehicles used for any competition or race and/or for
not covered under warranty. attempting to set up any kind of record.
9. Oxidation of unpainted/painted crankcase, cylinder 14. Any failure arising due to use of adulterated or bad
quality fuel.
block, cylinder head etc. in acidic environment or in
a coastal area. Parts affected due to bad fuel quality are not covered
Under warranty.
10. Parts of the vehicle that have been subjected to
15. If additional electrical accessories such as -
misuse, accident, negligent treatment OR which have Remote, Bigger horn, Musical brake light etc. fitted on
been used in conjunction with parts & an equipment vehicle.
not manufactured or recommended for use by Bajaj 16. If the vehicle has been used for commercial purpose
Auto Limited, if found is the sole judgement of Bajaj like Taxi or any other means of commercial
Auto Limited, such use prematurely affects the transportation.
performance and reliability of the vehicle. Bajaj Auto Limited reserves the right to make any changes in
11. Parts of the vehicle that have been altered and design or to add any improvements on the vehicle at any
modified or replaced in unauthorized manner like use time without incurring any obligation to install the same on a
vehicle previously supplied and sold. Also, the conditions of
of wider tyres, loud silencers etc and which in the this warranty are subject to alteration without any notice.
sole judgement of the Bajaj Auto Limited affects its
This warranty is the entire written warranty given by Bajaj
performance and reliability.
Auto Limited for “Platina 100 BS VI / Platina 110
BS VI” motorcycle’ and no other dealer or its or his agent
or employee is authorised to extend or enlarge this warranty.
40
 BATTERY WARRANTY CARD
MAKE OF BATTERY : ........................ MFG. CODE OF BATTERY :
BATTERY SR. NO.: BATTERY CHARGING DATE :
TYPE OF BATTERY : VEHICLE SALE DATE :
NAME OF OWNER AND ADDRESS :

TYPE OF VEHICLE : REG. NO.:

FRAME NO.: ENGINE NO.:

SERVICE RECORD
Sr. Age Specific Dealer’s Stamp * Code For Remarks:
Date Gravity Voltage Remarks & Signature * Code
No. Mths. LL : Low electrolyte level.
1 AE : Electrical system needs attention.
2 IR : Insufficient running of vehicle.
3 CB : Cover broken.
4 BC : Broken Container.
5 PM : Poor maintenance.
6 BA : Battery abused.

Note : Customer should insist that “Service Record" must be filled by respective authorised battery dealer as proof of specified
maintenance for easy settlement of claim, if any.
 TO BE FILLED IN BY BATTERY DEALERS / DISTRIBUTORS
IN CASE OF CLAIM
Name of Dealer & Code :____________________________________________________________________
____________________________________________________________________________________________
Date of claim :________________________________________________Battery Type :_________________
Serial No. :__________________________________________________Date of Fitment :________________

Failure Mode (Please tick as applicable)

• Loose connection • Overcharge / Undercharge
• Internal Short • Reverse Charge
• Plate Shedding • High Specific Gravity Electrolyte
• Intercell Connection • Electrolyte Contamination
• Does not Hold Charge • Electrolyte Level not Maintained
• Wrong Assembly • Left Lying Idle
• Wrong Application
• Terminal Corroded

# Claim Accepted ## Claim Rejected

Details of Repair, if any_____________________________________________________________________________

Note:
Please contact nearest respective authorised battery dealer for details immediately after purchase of
vehicle.