AMRUTHA AJITH

CIVIL ENGINEER UPDA CERTIFIED Scan Here

Objective
Contact Info
To get a position of a Civil Engineer within a reputed
company that can fully utilize my unique abilities and
+974 33611773 academic experience. To accept any challenging profile
Amrutha.ajith@gmail.com which your esteemed organization would make my
ability elevated and use my skills constructive.

Education Experience History

Joannou & Paraskevaides Qatar WLL
Certification Course Quality Control Inspector
(2015 – 2016 Batch) [June 2020 – June 2021]
Project Management
CADD Centre Project: Education City Stadium Project
Kerala - India Employer: JPAC Company [Joannou &
Paraskevaides (J& P) Qatar WLL, J&P Avax,
Bachelor’s degree Conspel (JPAC Joint Venture)]
(2011 – 2015 Batch) Location: Al-Rayyan, QATAR
Civil Engineering
Vidya Academy of Synopsis of the Project: The project is located at
Science & Technology Qatar Foundation South Campus and is a FIFA
Kerala - India edition 5 complied stadium for FIFA 2022 World
Cup with capacity of 40,000 seats. Stadium Bowl and
School pitch are air conditioned in 30° C ± 2° C, using
MES Indian School plenums under the tiers and grill openings at each
(2010 – 2011 Batch) seat of the bleachers. Footprint of Stadium with car
Doha - Qatar parking is 55,000 m² and total build up area is
175,000 m². Foundation is raft on tension with
flexible head piles. Superstructure comprises of core
walls, retaining walls, columns, structural V columns
Software Skills with and 7nos. levels of structural slabs.8th level is
composite slab on deck. Lower, mid and upper tiers
Autodesk AutoCAD made from concrete precast raker beams and
bleachers. At upper tier scaffolding type demountable
tier is constructed which will be dismantled lowering
Autodesk Civil 3D
the capacity of stadium to 25,000 seats at Legacy
mode. Roof steel structure is tension ring which is
Oracle Primavera lifted up to position using 56 nos. main radial cables
at big lift operation and compression beam seating at
Quantity Take off pin jointed steel columns. Facade cladding is
aluminum system frame with fabric cover. Roof
Staad Pro cladding system is aluminum standing seam system.

Roles & Responsibilities:

Revit Architecture
• Closure of request for inspection and testing (RFIT)
for civil, structural and Architectural activities.
MS Office Suite • Reviewing all quality related activities as per standard.
• Review all inspection reports for compliance.
• Review work procedures and method statements for
compliance with good work practices and the
customers contract specializations.

pg. 1 UPDA REGISTRATION NUMBER I 24153

AMRUTHA AJITH
CIVIL ENGINEER UPDA CERTIFIED Scan Here

Languages • Ensure that all inspection reports are accurate

and that all attached documents are in
English current status.
Professional • Preparation of handover documents
Working proficiency (ILR scale) (Inspection request) for architecture, civil and
structural discipline.
• Coordinating with subcontractor for all
Hindi
pending documents to close the RFITs
Professional • Daily submission of JPAC RFITs in
Working proficiency (ILR scale) compliance with project requirements, such as
IFC Drawings, MST, MAS, Survey Reports,
Tamil Test Reports and construction site issues.
Professional • Assisting the preparation and closure of MST
and ITP
Working proficiency (ILR scale)
• Submission of test reports for approval
• Preparation of work progress reports for
Malayalam
manager
Native Proficiency (ILR scale)

Qatar Trading & Contracting Group [QTCG]

Personal Info QA/QC Engineer I Material
Inspector [ August 2017 – June
Date of Birth : 23.04.1993 2020]
Nationality : Indian
Project: Inner Doha Re-sewerage Implementation
Passport No : H2333394 Strategy
(Ashghal)
Qatar ID 29235601361 Design & Construction of Lateral Interceptor Sewers
Contract LIS-01
Sponsor : Husband

Synopsis of the Project: This project is a 22km Micro

Interests tunneling for Inner Doha Re-sewerage Implementation
Strategy, Design & Construction of Lateral Interceptor
Sewers Contract LIS-01.
Designing Scope of Work: The scope of work includes the
Travel
Construction of approximately 25 km of various diameter
sewer lines (400, 600, 800, 1000, and 1200, 1600 & 2000
Camping mm) using non-disruptive method (Micro-Tunneling) The
project includes construction of 170 deep manholes and
Swimming road reinstatements. Preparation works including
excavation of Jacking /Reception shafts, setting outs, Test
Photography pits Excavations, Geotechnical Rock face Mapping,
Videography
Concrete Casting of Temporary wall lining for Manholes
and Dewatering installations. Installation of Permanent
Precast Manholes casting of in-situ manhole chambers and
application waterproofing Membranes, and Micro
tunneling operations
pg. 2 UPDA REGISTRATION NUMBER I 24153
AMRUTHA AJITH
CIVIL ENGINEER UPDA CERTIFIED Scan Here

Roles and Responsibilities:

About me
 Preparation of Work Inspection Reports and
Material Inspection reports (WIR & MIR).
 Successful closure of Rejected and Approved as noted
Works Inspections request, material inspections request
and conduct Materials Inspections, Sampling and
Monitor offsite production activities. E.g. Precast
concrete manhole segments & Precast Pipes.
 Quality documentation and monitoring for micro-
tunneling works using MTBM Herrenknecht AVN 800,
1000, 1200, 1600 & 2000 internal diameters RC jacking
pipes lined internally with GRP as per QCS 2010
specification.
 Coordinate with the Consultant on materials sampling
and testing of satisfactorily completed work, and quality
I am an enthusiastic, self-motivated, assurance testing of suspect materials.
reliable, responsible and hard-  Assures that the construction work is performed and
working person. I am able to work completed in accordance with the Contract Documents.
well both in a team environment as  Monitor all field test and ensure compliance with QCS
well as using own initiative. I am able and project specification.
to work well under pressure and  Monitoring all stockpiles materials and identifications
adhere to strict deadlines. as required.
 Inspection of materials arriving on-site and monitors
My Current Visa status is family  off-site production activities (e.g., precast concrete
status and I am under husband’s manhole segment and pipe production).
Sponsorship.  Report to the QA/QC Manager, control, and
monitor all activities related to Quality.
Academic Project  Manage QC Documents submittals of test reports,
calibrations logs and project dossiers.
 Major project - An energy
conscious approach towards the Workshops & Trainings
Functional design of a three-star
hospital building  Health & Safety trainings
 Seminar-winter contaminants of  First aid Trainings
parking lots and sidewalks friction  Workshop in back filling & compaction testing
and slipping risks.  Workshop in Quality control of Concrete works

Key Skills

 Material Inspection.
 Reviewing test reports with QCS & Projects
specifications.
 Ability to interpret drawings specifications &
Standards.
 Excellent written and verbal communication skills.
 Ability to work in a cross-functional team environment.
 Extremely detail-oriented.
pg. 3 UPDA REGISTRATION NUMBER I 24153
AMRUTHA AJITH
CIVIL ENGINEER UPDA CERTIFIED Scan Here

Reference Declaration
Mr. Abdul Rahman I hereby declare that all the information contained in this
HR, QTCG resume is in accordance with facts or truths to my knowledge.
Contact : +974 66018325 I take full responsibility for the correctness of the said
information. Also, I wish to express my strong interest in
working with your firm as a Civil Engineer. If presented with
an opportunity, I would like to show you how I can make a
significant contribution to your team.

Thank you for your consideration.

Amrutha Ajith

Place : Doha Date : 04.01.2022

pg. 4 UPDA REGISTRATION NUMBER I 24153