Precision Optical Performance

AlInGaP II LED Lamps

Technical Data
HLMP-ELxx
HLMP-EHxx
HLMP-EDxx

Features Applications
• Well Defined Spatial • Traffic Management:
Radiation Patterns Traffic Signals
• Viewing Angles: 15° , Work Zone Warning Lights
23° , 30° Variable Message Signs
• High Luminous Output • Commercial Outdoor
• Colors: Advertising:
592 nm Amber Signs
617 nm Reddish-Orange Marquees
630 nm Red • Automotive:
• High Operating Temperature: Exterior and Interior Lights
TJLED = +130° C
• Superior Resistance to Description
Moisture Precision Optical Performance These lamps are made with an
AlInGaP II (aluminum indium advanced optical grade epoxy
Benefits gallium phosphide) LEDs offer offering superior high tempera-
superior light output for ture and high moisture
• Viewing Angles Match Traffic
excellent readability in sunlight resistance performance in
Management Requirements
and dependable performance. outdoor signal and sign
• Colors Meet Automotive and The AlInGaP II technology applications. The maximum LED
Traffic Signal Specifications provides extremely stable light junction temperature limit of
• Superior Light Output output over long periods of time. +130° C enables high
Performance in Outdoor temperature operation in bright
Environments These LED lamps are untinted, sunlight conditions. The epoxy
• Suitable for Autoinsertion nondiffused, T-1 3/4 packages contains both uv-a and uv-b
into PC Boards incorporating second generation inhibitors to reduce the effects
optics which produce well of long term exposure to direct
defined radiation patterns at sunlight.
specific viewing cone angles.
 2

T-13/ 4 (5 mm) Precision Optical Performance AlInGaP II LED Lamps

Selection Guide
Typical
Viewing Color and Luminous
Angle Dominant Intensity Iv (mcd) [3,4,5]
2θ 1/2 Wavelength Lamps Without Standoffs Lamps With Standoffs @ I(f) = 20 mA
(Deg.)[2] (nm), Typ.[1] (Outline Drawing A) (Outline Drawing B) Min. Max.
HLMP-EL16-TW000 HLMP-EL18-TW000 2500 7200
HLMP-EL16-TWR00 HLMP-EL18-TWR00 2500 7200
HLMP-EL16-TWK00* 2500 7200
HLMP-EL16-TWS00 2500 7200
HLMP-EL16-TUS00 2500 4200
Amber 592 HLMP-EL16-TV400** 2500 5500
HLMP-EL16-TVU00 2500 5500
HLMP-EL16-UX000 HLMP-EL18-UX000 3200 9300
HLMP-EL16-UXR00 HLMP-EL18-UXR00 3200 9300
HLMP-EL16-VW000 4200 7200
15° HLMP-EL16-VWR000 4200 7200
HLMP-EL16-VWK00* 4200 7200
HLMP-EL16-VWS00 4200 7200
HLMP-EL16-VX000 4200 9300
HLMP-EL16-VXR00 4200 9300
HLMP-EL16-VX400** 4200 9300
HLMP-EL16-VXK00* 4200 9300
HLMP-EL16-VXS00 4200 9300
HLMP-EL16-VY000 HLMP-EL18-VY000 4200 12000
HLMP-EL16-VYR00 HLMP-EL18-VYR00 4200 12000
HLMP-EL16-VYK00* 4200 12000
HLMP-EL16-VYS00 4200 12000
Red-Orange 615 HLMP-EH18-TW000 2500 7200
HLMP-EH16-UX000 HLMP-EH18-UX000 3200 9300
Red 630 HLMP-ED16-TW000 HLMP-ED18-TW000 2500 7200
HLMP-ED16-TWT00 HLMP-ED18-TWT00 2500 7200
HLMP-ED16-UX000 HLMP-ED18-UX000 3200 9300
HLMP-ED16-UXT00 HLMP-ED18-UXT00 3200 9300
 3

T-13/4 (5 mm) Precision Optical Performance AlInGaP II Led Lamps (Continued)

Selection Guide
Typical
Viewing Color and Luminous
Angle Dominant Intensity Iv (mcd) [3,4]
2θ 1/2 Wavelength Lamps Without Standoffs Lamps With Standoffs @ I(f) = 20 mA
(Deg.)[2] (nm), Typ.[1] (Outline Drawing A) (Outline Drawing B) Min. Max
HLMP-EL25-QS400** 1150 2500
HLMP-EL25-QSU00 1150 2500
HLMP-EL25-QSK00* 1150 2500
HLMP-EL25-QSS00 1150 2500
HLMP-EL25-QT000 1150 3200
HLMP-EL25-QTR00 HLMP-EL27-QTR00 1150 3200
HLMP-EL25-RU000 HLMP-EL27-RU000 1500 4200
HLMP-EL25-RUR00 HLMP-EL27-RUR00 1500 4200
HLMP-EL25-RUK00* 1500 4200
23° Amber 592 HLMP-EL25-RUS00 1500 4200
HLMP-EL25-ST000 1900 3200
HLMP-EL25-STR00 1900 3200
HLMP-EL25-STK00* 1900 3200
HLMP-EL25-STS00 1900 3200
HLMP-EL25-SU000 1900 4200
HLMP-EL25-SUR00 1900 4200
HLMP-EL25-SU400** 1900 4200
HLMP-EL25-SUU00 1900 4200
HLMP-EL25-SUK00* 1900 4200
HLMP-EL25-SUS00 1900 4200
HLMP-EL25-SVK00* 1900 5500
HLMP-EL25-SVS00 1900 5500
HLMP-EL25-SV000 HLMP-EL27-SV000 1900 5500
HLMP-EL25-SVR00 HLMP-EL27-SVR00 1900 5500
HLMP-EL25-TW000 HLMP-EL27-TW000 2500 7200
HLMP-EL25-TWR00 HLMP-EL27-TWR00 2500 7200
HLMP-EL25-TWK00* 2500 7200
HLMP-EL25-TWS00 2500 7200

Notes:
1. Dominant Wavelength, λd, is derived from the CIE Chromaticity Diagram 5. Tolerance for each intensity bin limit is ± 15%.
and represents the color of the lamp.
2. θ1/2 is the off-axis angle where the luminous intensity is one half the on- Part numbers in bold are recommended for new designs.
axis intensity. *HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only.
3. The luminous intensity is measured on the mechanical axis of the lamp **HLMP-xLxx-xx400 are selected to amber color bin 4 only.
package.
4. The optical axis is closely aligned with the package mechanical axis.
 4

T-13/4 (5 mm) Precision Optical Performance AlInGaP II Led Lamps (Continued)

Selection Guide
Typical
Viewing Color and Luminous
Angle Dominant Intensity Iv (mcd) [3,4]
2θ 1/2 Wavelength Lamps Without Standoffs Lamps With Standoffs @ I(f) = 20 mA
(Deg.)[2] (nm), Typ.[1] (Outline Drawing A) (Outline Drawing B) Min. Max
HLMP-EH25-QT000 1150 3200
Red-Orange 615 HLMP-EH25-RU000 1500 4200
HLMP-EH27-SV000 1900 5500
HLMP-EH25-TW000 HLMP-EH27-TW000 2500 7200
23º HLMP-ED25-QT000 1150 3200
HLMP-ED25-QTT00 1150 3200
Red 630 HLMP-ED25-RU000 HLMP-ED27-RU000 1500 4200
HLMP-ED25-RUT00 HLMP-ED27-RUT00 1500 4200
HLMP-ED25-SV000 HLMP-ED27-SV000 1900 5500
HLMP-ED25-SVT00 HLMP-ED27-SVT00 1900 5500
HLMP-ED25-TW000 HLMP-ED27-TW000 2500 7200
HLMP-ED25-TWT00 HLMP-ED27-TWT00 2500 7200
HLMP-EL31-QRS00 1150 1900
HLMP-EL31-QS000 1150 2500
HLMP-EL31-QSR00 1150 2500
HLMP-EL31-QS400** 1150 2500
HLMP-EL31-QSU00 1150 2500
HLMP-EL31-QT000 HLMP-EL33-QT000 1150 3200
30° Amber 592 HLMP-EL31-QTR00 HLMP-EL33-QTR00 1150 3200
HLMP-EL31-QTK00* 1150 3200
HLMP-EL31-QTS00 1150 3200
HLMP-EL31-SV000 HLMP-EL33-SV000 1900 5500
HLMP-EL31-SVR00 HLMP-EL33-SVR00 1900 5500
HLMP-EL31-ST000 1900 3200
HLMP-EL31-STR00 1900 3200
HLMP-EL31-STK00* 1900 3200
HLMP-EL31-STS00 1900 3200
HLMP-EL31-SUK00* 1900 4200

Notes:
1. Dominant Wavelength, λd, is derived from the CIE Chromaticity 5. Tolerance for each intensity bin limit is ± 15%.
Diagram and represents the color of the lamp.
2. θ1/2 is the off-axis angle where the luminous intensity is one half the Part numbers in bold are recommended for new designs.
on-axis intensity. *HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only.
3. The luminous intensity is measured on the mechanical axis of the **HLMP-xLxx-xx400 are selected to amber color bin 4 only.
lamp package.
4. The optical axis is closely aligned with the package mechanical axis.
 5

T-13/4 (5 mm) Precision Optical Performance AlInGaP II Led Lamps (Continued)

Selection Guide
Typical
Viewing Color and Luminous
Angle Dominant Intensity Iv (mcd) [3,4]
2θ 1/2 Wavelength Lamps Without Standoffs Lamps With Standoffs @ I(f) = 20 mA
(Deg.)[2] (nm), Typ.[1] (Outline Drawing A) (Outline Drawing B) Min. Max.
HLMP-EL31-SUS00 1900 4200
HLMP-EL31-SU400** 1900 4200
Amber 592 HLMP-EL31-SUU00 1900 4200
HLMP-EL31-SU000 1900 4200
HLMP-EL31-SUR00 1900 4200
HLMP-EL31-SVK00* 1900 5500
HLMP-EL31-SVS00 1900 5500
HLMP-EH31-PS000 880 2500
30° Red-Orange 615 HLMP-EH31-QT000 HLMP-EH33-QT000 1150 3200
HLMP-EH31-RU000 HLMP-EH33-RU000 1500 4200
HLMP-EH31-SV000 HLMP-EH33-SV000 1900 5500
HLMP-EH31-SU000 1900 4200
HLMP-ED33-QT000 1150 3200
HLMP-ED31-QTT00 HLMP-ED33-QTT00 1150 3200
Red 630 HLMP-ED31-ST000 1900 3200
HLMP-ED31-STT00 1900 3200
HLMP-ED31-SU000 1900 4200
HLMP-ED31-SUT00 1900 4200
HLMP-ED31-RU000 HLMP-ED33-RU000 1500 4200
HLMP-ED31-RUT00 HLMP-ED33-RUT00 1500 4200
HLMP-ED31-SV000 HLMP-ED33-SV000 1900 5500
HLMP-ED31-SVT00 HLMP-ED33-SVT00 1900 5500

Notes:
1. Dominant Wavelength, λd, is derived from the CIE Chromaticity Diagram and Part numbers in bold are recommended for new designs.
represents the color of the lamp. *HLMP-xLxx-xxK00 are selected to amber color bins 2 and 4 only.
2. θ1/2 is the off-axis angle where the luminous intensity is one half the on- **HLMP-xLxx-xx400 are selected to amber color bin 4 only.
axis intensity.
3. The luminous intensity is measured on the mechanical axis of the lamp
package.
4. The optical axis is closely aligned with the package mechanical axis.
5. Tolerance for each intensity bin limit is ± 15%.
 6

Part Numbering System

HLMP- x x xx - x x x xx

Mechanical Options
00: Bulk Packaging
DD: Ammo Pack
YY: Flexi-Bin, Bulk Packaging
ZZ: Flexi-Bin; Ammo Pack

Color Bin & VF Selections

0: No color bin limitation
4: Amber color bin 4 only
K: Amber color bins 2 and 4 only
L: Color bins 4 and 6
R: Amber color bins 1, 2, 4, and 6 with VF max of 2.6 V
S: Amber color bins 2 and 4 with VF max of 2.6 V
T: Red color with VF max of 2.6 V
U: Amber color bin 4 with VF max of 2.6 V
W: Color bins 2, 4 and 6 with VF max of 2.6 V
Y: Color bins 4 and 6 with VF max of 2.6 V

Maximum Intensity Bin

0: No Iv bin limitation

Minimum Intensity Bin

Viewing Angle and Lead Standoffs

16: 15 degree without lead standoffs
18: 15 degree with lead standoffs
25: 23 degree without lead standoffs
27: 23 degree with lead standoffs
31: 30 degree without lead standoffs
33: 30 degree with lead standoffs

Color
D: 630 nm Red
H: 615 nm Red-Orange
L: 592 nm Amber

Package
E: 5 mm Round
 7

Package Dimensions
A 5.00 ± 0.20
B 5.00 ± 0.20
(0.197 ± 0.008) (0.197 ± 0.008)

1.14 ± 0.20
8.71 ± 0.20 (0.045 ± 0.008) 8.71 ± 0.20
(0.343 ± 0.008 (0.343 ± 0.008)
d

1.14 ± 0.20
2.35 (0.093) (0.045 ± 0.008)
MAX.
31.60 31.60
(1.244) MIN. 0.70 (0.028) (1.244) MIN.
MAX. 1.50 ± 0.15
(0.059 ± 0.006)

0.70 (0.028)
MAX. PART NO. d
HLMP-EX18-xxxxx 12.60 ± 0.18
CATHODE CATHODE (0.496 ± 0.007)
LEAD LEAD HLMP-EX27-xxxxx 11.59 ± 0.25
(0.446 ± 0.010)
HLMP-EX33-xxxxx 11.99 ± 0.25
(0.472 ± 0.010)

0.50 ± 0.10 SQ. TYP. 0.50 ± 0.10 SQ. TYP.

1.00 MIN. (0.020 ± 0.004) 1.00 MIN. (0.020 ± 0.004)
(0.039) (0.039)

5.80 ± 0.20 5.80 ± 0.20

CATHODE (0.228 ± 0.008) B CATHODE (0.228 ± 0.008)
FLAT FLAT

2.54 ± 0.38 2.54 ± 0.38

(0.100 ± 0.015) (0.100 ± 0.015)

Absolute Maximum Ratings at TA = 25°C

DC Forward Current[1,2,3] ..................................................................50 mA
Peak Pulsed Forward Current[2,3] ................................................. 100 mA
Average Forward Current .................................................................30 mA
Reverse Voltage (IR = 100 µA) ................................................................ 5 V
LED Junction Temperature .............................................................. 130° C
Operating Temperature ................................................... -40°C to +100° C
Storage Temperature ....................................................... -40°C to +120° C
Wave Solder Temperature ........................................ 250° C for 3 seconds
[1.59 mm (0.060 in.) below body]

Notes:
1. Derate linearly as shown in Figure 4.
2. For long term performance with minimal light output degradation, drive currents
between 10 mA and 30 mA are recommended. For more information on recommended
drive conditions, please refer to Application Brief I-024 (5966-3087E).
3. Please contact your sales representative about operating currents below 10 mA.
 8

Electrical/Optical Characteristics at TA = 25°C

Parameter Symbol Min. Typ. Max. Units Test Conditions
Forward Voltage IF = 20 mA
Amber (λd = 592 nm) 2.15
Red-Orange (λd = 617 nm) VF 2.08 2.4[1] V
Red (λd = 630 nm) 2.00
Reverse Voltage VR 5 20 V IR = 100 µA
Peak Wavelength Peak of Wavelength of
Amber 594 Spectral Distribution
Red-Orange λPEAK 623 nm at IF = 20 mA
Red 639
Spectral Halfwidth ∆λ1/2 17 nm Wavelength Width at
Spectral Distribution
1/2 Power Point at
IF = 20 mA
Speed of Response τs 20 ns Exponential Time
Constant, e-t/τs
Capacitance C 40 pF VF = 0, f = 1 MHz
Thermal Resistance RΘJ-PIN 240 °C/W LED Junction-to-Cathode
Lead
Luminous Efficacy[2] Emitted Luminous
Amber 500 Power/Emitted Radiant
Red-Orange ηv 235 lm/W Power at If = 20 mA
Red 155

Notes:
1. For options -xxRxx, -xxSxx, -xxTxx, -xxUxx, -xxWxx, -xxYxx, max forward voltage (Vf) is 2.6 V. Refer to Vf bin table.
2. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = Iv/ηv, where I v is the luminous intensity in candelas and ηv is
the luminous efficacy in lumens/watt.

1.0 60
AMBER RED-ORANGE
50
DC FORWARD CURRENT – mA

RED
RELATIVE INTENSITY

40

0.5 30
AMBER
20

10
RED
0 0
550 600 650 700 0 0.5 1.0 1.5 2.0 2.5 3.0
WAVELENGTH – nm FORWARD VOLTAGE – V

Figure 1. Relative Intensity vs. Peak Wavelength. Figure 2a. Forward Current vs. Forward
Voltage for Option -xxRxx, -xxSxx, -xxTxx,
-xxUxx, and -xxVxx.
 9

100 2.5
90 50

IF – FORWARD CURRENT – mA
80 2.0

(NORMALIZED AT 20 mA)
RED & RED-ORANGE 40

RELATIVE INTENSITY
70 RθJA = 585° C/W
RED
CURRENT – mA

60 1.5
30
50 AMBER
RθJA = 780° C/W
40 1.0
20
30
AMBER
20 0.5
10
10
0 0 0
1.0 1.5 2.0 2.5 3.0 0 10 20 30 40 50 0 20 40 60 80 100
VF – FORWARD VOLTAGE – V FORWARD CURRENT – mA TA – AMBIENT TEMPERATURE – °C

Figure 2b. Forward Current vs. Forward Figure 3. Relative Luminous Intensity vs. Figure 4. Maximum Forward Current vs.
Voltage. Forward Current. Ambient Temperature. Derating Based on
TJMAX = 130°C.

1.00
0.90
0.80
NORMALIZED INTENSITY – %

0.70
0.60
0.50
0.40
0.30
0.20
0.10
0
-25 -20 -15 -10 -5 0 5 10 15 20 25

ANGULAR DISPLACEMENT – DEGREES

Figure 5. Representative Spatial Radiation Pattern for 15° Viewing Angle Lamps.

1.00
0.90
0.80
NORMALIZED INTENSITY – %

0.70
0.60
0.50
0.40
0.30
0.20
0.10
0
-25 -20 -15 -10 -5 0 5 10 15 20 25

ANGULAR DISPLACEMENT – DEGREES

Figure 6. Representative Spatial Radiation Pattern for 24° Viewing Angle Lamps.
 10

1.00
0.90
0.80
NORMALIZED INTENSITY

0.70
0.60
0.50
0.40
0.30
0.20
0.10
0
-25 -20 -15 -10 -5 0 5 10 15 20 25
ANGULAR DISPLACEMENT – DEGREES

Figure 7. Representative Spatial Radiation Pattern for 30° Viewing Angle Lamps.

Intensity Bin Limits Amber Color Bin Limits

(mcd at 20 mA) (nm at 20 mA) Vf Bin Table[2]
Bin Bin Bin
Name Min. Max. Name Min. Max. Name Min. Max.
P 880 1150 1 584.5 587.0 VA 2.0 2.2
Q 1150 1500 2 587.0 589.5 VB 2.2 2.4
R 1500 1900 4 589.5 592.0 VC 2.4 2.6
S 1900 2500 6 592.0 594.5 Tolerance for each bin limit is ±0.05 V.
T 2500 3200 Tolerance for each bin limit is ±0.5 nm.
U 3200 4200
V 4200 5500 Note:
1. Bin categories are established for
W 5500 7200 classification of products. Products
X 7200 9300 may not be available in all bin
categories.
Y 9300 12000 2. Vf Bin table only available for those
Z 12000 16000 part number with options -xxRxx,
-xxSxx, -xxTxx, -xxUxx, -xxWxx,
Tolerance for each bin limit is ±15%. -xxYxx.
www.agilent.com/semiconductors
For product information and a complete list of
distributors, please go to our web site.
For technical assistance call:
Americas/Canada: +1 (800) 235-0312 or
(916) 788-6763
Europe: +49 (0) 6441 92460
China: 10800 650 0017
Hong Kong: (+65) 6756 2394
India, Australia, New Zealand: (+65) 6755 1939
Japan: (+81 3) 3335-8152 (Domestic/Interna-
tional), or 0120-61-1280 (Domestic Only)
Korea: (+65) 6755 1989
Singapore, Malaysia, Vietnam, Thailand,
Philippines, Indonesia: (+65) 6755 2044
Taiwan: (+65) 6755 1843
Data subject to change.
Copyright © 2004 Agilent Technologies, Inc.
Obsoletes 5988-8601EN
June 23, 2004
5989-0661EN
This datasheet has been download from:

www.datasheetcatalog.com

Datasheets for electronics components.