Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
67 views6 pages

Experiment - 1: Aim: Learn To Use Commands Like Tcpdump, Netstat, Ipconfig, and Nslookup

Uploaded by

Diksha Nasa

The document describes an experiment to learn basic networking commands like ipconfig, ping, hostname, getmac, netstat, tracert, nslookup, arp, nbtstat, and pathping. It provides the description, syntax, example usage, and expected output for each command. The goal is to understand how to use these common networking troubleshooting and diagnostic tools from the Windows command line.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

Experiment - 1: Aim: Learn To Use Commands Like Tcpdump, Netstat, Ipconfig, and Nslookup

Uploaded by

Diksha Nasa
67 views6 pages
The document describes an experiment to learn basic networking commands like ipconfig, ping, hostname, getmac, netstat, tracert, nslookup, arp, nbtstat, and pathping. It provides the description, syntax, example usage, and expected output for each command. The goal is to understand how to use these common networking troubleshooting and diagnostic tools from the Windows command line.

Original Description:

CSBS Lab 1 for Computer networking course . Sem 6.

Original Title

Lab1_CN_CSBS

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

The document describes an experiment to learn basic networking commands like ipconfig, ping, hostname, getmac, netstat, tracert, nslookup, arp, nbtstat, and pathping. It provides the description, syntax, example usage, and expected output for each command. The goal is to understand how to use these common networking troubleshooting and diagnostic tools from the Windows command line.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
67 views6 pages

Experiment - 1: Aim: Learn To Use Commands Like Tcpdump, Netstat, Ipconfig, and Nslookup

Uploaded by

Diksha Nasa
The document describes an experiment to learn basic networking commands like ipconfig, ping, hostname, getmac, netstat, tracert, nslookup, arp, nbtstat, and pathping. It provides the description, syntax, example usage, and expected output for each command. The goal is to understand how to use these common networking troubleshooting and diagnostic tools from the Windows command line.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 6

Experiment -1

Date: 10 January 2022


Title of the Experiment: Using Basic commands on CMD.
Aim: Learn to use commands like tcpdump, netstat, ipconfig,
and nslookup.
Commands:
1. Ipconfig
Description: (Internet Protocol CONFIGuration) A command line utility
that is used to display and manage the IP address assigned to the machine.
Syntax: ipconfig
Eg: ipconfig
Output:
2. Ping
Description: The ping command is a Command Prompt command used to
test the ability of the source computer to reach a specified destination
computer.
Syntax: ping <IP address>, ping < Domain Name>
Eg: ping www.google.com
Output:

3. Hostname
Description: It is used to obtain the DNS(Domain Name System) name and
set the system's hostname or NIS(Network Information System) domain
name. A hostname is a name which is given to a computer and it attached
to the network. Its main purpose is to uniquely identify over a network.
Syntax: hostname
Eg: hostname
Output:
4. Getmac
Description: Getmac is a Windows command used to display the Media
Access Control (MAC) addresses for each network adapter in the
computer.
Syntax: getmac
Eg: getmac
Output:

5. NetStat
Description: The netstat provides the statistics and information in the use
of the current TCP-IP Connection network about the protocol.
Syntax: netstat [-a] [-b] [-e] [-n] [-o] [-p <Protocol>] [-r] [-s] [<interval>]
Eg: Netstat -n
Output:
6. Tracert
Description: The tracert command is a Command Prompt command which
is used to get the network packet being sent and received and the number
of hops required for that packet to reach to target.
Syntax: tracert [-d] [-h MaxHops] [-w TimeOut] target
Eg: tracert www.google.com
Output:

7. Nslookup
Description: The Nslookup, which stands for name server lookup
command, is a network utility command used to obtain information about
internet servers. It provides name server information for the DNS (Domain
Name System), i.e. the default DNS server’s name and IP Address.
Syntax: Nslookup , Nslookup < domain name>
Eg: Nslookup www.youtube.com
Output:
8.Arp
Description: The ARP command provides information like Address, Flags,
Mask, IFace, Hardware Type, Hardware Address, etc.
Syntax: arp [/a [<inetaddr>] [/n <ifaceaddr>]] [/g [<inetaddr>] [-n
<ifaceaddr>]] [/d <inetaddr> [<ifaceaddr>]] [/s <inetaddr> <etheraddr>
[<ifaceaddr>]]
Eg: arp -a
Output:

9. Nbtstat
Description: Nbtstat is designed to help troubleshoot NetBIOS name
resolution problems.
Syntax: nbtstat < -a (name)> < -A (IP-address)> < -c>< -n> <-r> <-R><-RR>
<-S> <-s>
Eg: nbtstat -c
Output:
10.Path Ping
Description: The pathping command which provides a combination of the
best aspects of Tracert and Ping.
Syntax: pathping [/n] [/h <maximumhops>] [/g <hostlist>] [/p <Period>]
[/q <numqueries> [/w <timeout>] [/i <IPaddress>] [/4 <IPv4>] [/6
<IPv6>][<targetname>]
Eg: pathping 8.8.8.8
Output :

You might also like