Ericsson RX8200: Advanced Modular Receiver
Ericsson RX8200: Advanced Modular Receiver
Ericsson RX8200: Advanced Modular Receiver
Each individual RX8200 unit can be easily configured and tailored to the user’s precise needs. This
means an optimal balance of functionality and cost can be achieved, resulting in a unit with all the
required features without the additional expense of superfluous connectivity or functionality.
The RX8200 offers a vast and sophisticated array of configuration possibilities allowing it to cover a broad
range of applications. The RX8200 can be tailored to standard definition or high definition uses with
MPEG-2 or MPEG-4 decode technology in both 4:2:0 and 4:2:2 modes as well as JPEG 2000 decode
capability. Connectivity into the receiver is achieved with DVB-S2 satellite, IP, ATM and ASI options.
03-2013-v10
Ericsson RX8200 Advanced Modular Receiver
CONFIGURATION PHILOSOPHY
INPUT OPTIONS
The RX8200 Advanced Modular Receiver has a single ASI input as
standard and can be configured with one additional choice of inputs type.
DVB-S2 Multi-TS Mode (RX82XX/SWO/DVBS2/VCM, FAZ 101 0113/56)
Provides DVB-S2 Multi-transport stream input capability
IP Transport Stream Input Options
Single transport stream output from receiver
The RX8200 may be configured with IP transport stream input connectivity
via the following options. DVB-S2 Low Symbol Rate License
100/1000BaseT Input (RX8200/HWO/IP/GIGE, FAZ 101 0113/12) (RX82XX/SWO/DVBS2/LSYM, FAZ 101 0113/31)
MPEG transport stream over IP Enables DVB-S2 symbol rate of 1 Msym/s to 5 Msym/s
2x 100/1000BaseT input
G.703 ATM Input Option
Very low latency
The RX8200 may be configured with G.703 ATM connectivity.
SMPTE 2022M Pro-MPEG FEC License G703 ATM Input (RX8200/HWO/G703, FAZ 101 0113/8)
(RX8200/SWO/IP/PROMPEG, FAZ 101 0113/37)
E3 or DS-3 inputs
Enables SMPTE 2022M Pro-MPEG FEC capability for the IP input card
34 Mbps or 45 Mbps rates
Requires IP input card
03-2013-v10
Ericsson RX8200 Advanced Modular Receiver
VIDEO AND TRANSPORT STREAM OUTPUT SECURITY OPTIONS
OPTIONS Password Protection of Web Browser
The RX8200 Advanced Modular Receiver offers the option of an SD only (RX8200/SWO/PW, FAZ 101 0113/51)
or HD and SD capable video output card. Both video output card options Protects Web browser from malicious or accidental changes
also provide ASI transport stream output connectivity. IP transport stream
output capability may additionally be specified.
STREAM PROCESSING OPTIONS
SD Video and ASI Output (RX8200/HWO/SD, FAZ 101 0113/18) The RX8200 Advanced Modular Receiver offers as sophisticated choice of
2x composite video outputs transport stream processing capability allowing the unit to operate as a
2x switchable ASI/SDI outputs cost effective network interface into a headend or transport stream
turn-around system
3 Gbps HD and SD Video and ASI Output
Single Service Filtering
(RX8200/HWO/HD/3G, FAZ 101 0113/10)
(RX8200/SWO/SING/SERVFILT, FAZ 101 0113/53)
1x composite video output
Filter multiple services to output a single service
1x RGB/YPrPb analog video output
Re-map PIDs for the outgoing service
3x switchable ASI/SDI/HD-SDI outputs
3 Gbps HD-SDI output compatible with MPEG-4 4:2:2 1080p50/60 Multi-Service Filtering
capability (RX8200/SWO/MULT/SERVFILT, FAZ 101 0113/47)
Filter N multiple incoming services to M outgoing services
IP Transport Stream Output (RX8200/HWO/IP/OUT, FAZ 101 0113/14) Re-map PIDs for a single service
Encapsulation of transport stream output into IP multicast CBR MPTS transport stream output
MPTS or single or multiple SPTS output stream with licence key Service splitting for multiple IP SPTS output
2x Gigabit Ethernet RJ-45 interfaces capability
03-2013-v10
Ericsson RX8200 Advanced Modular Receiver
4:2:2 Decode Options Simulsync 3D Decode (RX8200/SWO/3D, FAZ 101 0113/61)
MPEG-2 4:2:2 Decoding Hardware Provides full frame , synchronized left & Right eye 3D capability
(RX8200/HWO/MP2/422, FAZ 101 0113/15) Additionally requires Frame Sync, Down--conversion options
Dormant hardware for MPEG-2 4:2:2 decoding Requires separate RX8200 units for left & Right eye video decode
Enable MPEG-2 4:2:2 decoding with additional options
DATA AND CONTROL OPTIONS
MPEG-2 SD 4:2:2 Decoding The RX8200 Advanced Modular Receiver can be further enhanced by a
(RX8200/SWO/MP2/422/SD, FAZ 101 0113/59) range of data pass-through and remote control capabilities.
Enables MPEG-2 SD 4:2:2 decoding
Requires MPEG-2 4:2:2 only hardware or MPEG-2 & 4 4:2:2 hardware RS232 Remote Control and Data
(RX8200/BAS/2, FAZ 101 0113/2) (RX8200/HWO/RS232, FAZ 101 0113/17)
RS232 remote control - Alteia protocol
MPEG-2 HD 4:2:2 Decoding RS232 data output
(RX8200/SWO/MP2/HD/422, FAZ 101 0113/39)
Enables MPEG-2 HD 4:2:2 decoding High speed IP data output (RX8200/SWO/IP/DATA, FAZ 101 0113/35)
Requires MPEG-2 SD 4:2:2 decoding option MPE based data de-encapsulation of IP data
Requires IP TS output option (RX8200/HWO/IP/OUT, FAZ 101 0113/14)
MPEG-2 and MPEG-4 AVC SD 4:2:2 Decoding
(RX8200/SWO/MP4/422/SD, FAZ 101 0113/43)
Enables MPEG-4 AVC SD 4:2:2 decoding
AUDIO OPTIONS
Enables MPEG-2 SD 4:2:2 decoding The RX8200 Advanced Modular Receiver provides many different audio
Requires RX8200/BAS/2, FAZ 101 0113/2 unit
capabilities to allow optimal connectivity for many wide-ranging and varied
applications. Capability for MPEG-1 Layer II audio is provided with any
video decode license. Decoded audio will be embedded in (HD)SDI
MPEG-2 and MPEG-4 AVC HD 4:2:2 Decoding
outputs and output via physical audio interfaces if ordered.
(RX8200/SWO/MP4/422/HD, FAZ 101 0113/42)
Enables MPEG-4 AVC HD 4:2:2 decoding Balanced Audio Output (RX8200/HWO/BAL/AUD, FAZ 101 0113/3)
Enables MPEG-2 HD 4:2:2 decoding 2x stereo pairs of balanced analog and digital outputs
Requires MPEG-2 and MPEG-4 AVC SD 4:2:2 option Order QTY two for 4x stereo pair capability
MPEG-4 AVC HD 4:2:2 1080p 50/60 Decoding Dolby® Digital Decode (RX8200/SWO/AC3, FAZ 101 0113/22)
(RX8200/SWO/HDSDI/3G, FAZ 101 0113/34)
Enables decoding or pass-through of Dolby Digital Audio
Enables MPEG-4 AVC HD 4:2:2 1080p50/60 decoding
2x 5.1 decode and down-mix to 2.0 (stereo)
Enables 3Gig HD-SDI output
1x full 5.1 decode - with 4 Audio license
Requires MPEG-2 and MPEG-4 AVC HD 4:2:2 decoding option
2x 2.0/5.1 pass-through -compressed and embedded in (HD)SDI
100ms end-to-end Latency in conjunction with Ericsson AVP encoders
AAC Audio decode (RX8200/SWO/AAC, FAZ 101 0113/21)
VIDEO PROCESSING OPTIONS 2x AAC-LC and HE-AAC decoding
The RX8200 offers a wide range of video processing options to allow the
decoded video to easily interface to HD and SD infrastructures. Phase Aligned Audio (RX8200/SWO/PAA, FAZ 101 0113/49)
Phase aligned MPEG-1 Layer II audio
Low Latency Decode (RX8200/SWO/LDELAY, FAZ 101 0113/38)
2x phase aligned groups of 4x stereo pairs
Low latency video decode (4:2:0 and 4:2:2 modes)
Requires 4x Audio license (RX8200/SWO/4AUD, FAZ 101 0113/20)
Includes ultra low latency stripe refresh capability
Compatible with linear and audio pass-throughs 4x Audio Capability (RX8200/SWO/4AUD, FAZ 101 0113/20)
Requires RX8200/BAS/2, FAZ 101 0113/2 unit Enables up to six decodes
Enables pass-through of audio services three and four
Compatible with MPEG-1 Layer II, Dolby Digital, AAC, Dolby E and
®
High Quality Down-conversion
(RX8200/HWO/HQDCONV, FAZ 101 0113/60) linear audio
Grade 1 quality Down-conversion of HD to SD Embeds up to six channels of audio into the (HD) SDI video output
Capability to Down-convert 1080p 50/60 to 1080i, 720p or SD Requires QTY two audio output cards if four stereo pairs of physical
Provides broadcast quality simultaneous down-conversion allowing one audio interfaces are desired
HD transmission to address both HD and SD distribution needs
XLR Terminal Audio Break-Out Cable
Down-conversion (RX8200/SWO/DCONV, FAZ 101 0113/26) (RX8XXX/CABLE/XLR , FAZ 101 0108/24)
Grade 2 quality Down-conversion of 1080i or 720p HD to SD Provides XLR terminal connections for analogue and digital audio output
Simultaneous presentation of HD and SD on video output interfaces 1x stereo pair per breakout cable via 2x XLR connectors
Up-conversion (RX8200/SWO/UPCONV, FAZ 101 0113/54) Screw Terminal Audio Break-Out Cable
Up-conversion of SD to HD resolution (4:2:0 modes only) (RX8XXX/CABLE/SCRTRM, FAZ 101 0108/23)
Non-simultaneous up-conversion to 720p or 1080i resolution Provides screw terminal connections for analog and digital audio output
1x stereo pair per breakout cable via 2x Screw terminal connectors
Cross-conversion (RX8200/SWO/XCONV, FAZ 101 0113/55)
Conversion of HD video from 720p to 1080i or from 1080i to 720p *Check availability
Sample configuration with: Satellite input, frame sync, HD video output, IP transport stream output and 2x Audio output modules installed
SPECIFICATIONS
STANDARD FEATURES DVB-S2 QPSK (FAZ 101 0113/32) DVB-T/T2 Input Options
Modulation: DVB-S2 QPSK
Input Interfaces DVB-T/T2 Input (FAZ 101 0113/70)
Standard: EN302 307
Connector: 1x F-Type (F) 75 Ohm
ASI Transport Stream Input Symbol rate: 5 to 31 (60) Msyms
Channel bandwidth: 7, 8MHz
Connector: 1x BNC (F) 75 Ohm FEC DVB-S2 QPSK: 1/4, 1/3, 2/5, 1/2, 3/5,
2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Frequency range: UHF 470 – 862 MHz,
Max. input rate: 160 Mbps VHF 174 – 230 MHz
Packet length: 188/204 byte packets Input MER level: 6 - 36dB
DVB-S2 8PSK (FAZ 101 0113/30)
Standard: EN50083-9
Includes DVB-S2 QPSK functionality
Modulation: DVB-S2 8PSK VIDEO AND TS OUTPUT OPTIONS
Features
FEC, DVB-S2 8PSK: 3/5, 2/3, 3/4, 5/6, 8/9,
Program selection for ATSC, DVB and Video Output Options
9/10
MPEG-only streams
SD Video Output (FAZ 101 0113/18)
One alarm relay, two relays under SCTE 35
DVB-S2 16APSK (FAZ 101 0113/29) Composite Video
control
Includes DVB-S2 QPSK and 8PSK Connector: 2x BNC (F) 75 Ohm
Service cycling through all decodable functionality
services Format: PAL / NTSC
Modulation: DVB-S2 16APSK and 32APSK SDI/DVB ASI-C (Switchable)
Control FEC, DVB-S2 16APSK: 2/3, 3/4, 4/5, 5/6, 8/9, Connector: 2x BNC 75 ohms
9/10
SD-SDI standard: SMPTE 259M
Front panel keypad and LCD FEC, DVB-S2 32APSK: 3/4, 4/5, 5/6, 8/9,
9/10 Embedded Audio: SMPTE 272M (SD)
SNMP control, traps and alarms
Requires FAZ 101 0113/6 option Embedded Audio Channels: two, four or six
Web browser stereo pairs
ASI standard: EN50083-9
INPUT OPTIONS DVB-S2 Low Symbol Rate
(FAZ 101 0113/31)
Satellite Input Options Symbol rate - extended to 1 to 31 (60) HD and SD Video Output
Msym/s (FAZ 101 0113/10)
2nd Generation Satellite Input, Satellite & Applies to DVB-S2 modes only Composite Video
IP input Connector: 1x BNC (F) 75 Ohm
(FAZ 101 0113/6, FAZ 101 0113/70) Format: PAL / NTSC
IP Input Options
Connector: 4x F-Type (F), 75 Ohm Video RGB-HD (SVGA)
Modulation: DVB-S QPSK MPEG over Gigabit Ethernet IP Input, Connector: 1x 15-pin D-type
Standard: EN300 421 Satellite & IP input
Format: RGB H&V/YPrPb (switchable)
(FAZ 101 0113/12, FAZ 101 0113/70)
Frequency range: 950 MHz to 2150 MHz SDI/HD-SDI/DVB ASI-C (switchable)
Connector: 2 x RJ 45
Input level: -25 dBm to -65 dBm Connector: 3x BNC 75 ohms
Format: 100/1000BaseT
DVB-S Symbol rate: 1 Msyms to 45 Msyms 3 Gbps HD-SDI standard: SMPTE 424M
Max. input rate: 208Mbps
DVB-S2 Symbol rate: 1 (5) Msyms to HD-SDI standard: SMPTE 292M
60Msyms on inputs 1 & 2, Max bit rate SD-SDI standard: SMPTE 259M
170Mbps, 31 Msyms, Max bit rate: 81Mbps SMPTE 2022M Pro-MPEG FEC
on input 3 & 4 (FAZ 101 0113/37) Embedded Audio: SMPTE 299M (HD)
SMPTE 272M (SD)
DVB-S FEC: 1/2, 2/3, 3/4, 5/6, 7/8 SMPTE 2022M (Pro-MPEG) FEC
Embedded Audio Channels: up to 8x stereo
DVB-S2 FEC frame: Short & Normal frames pairs
DVB-S2 Physical layer scrambling G703 Input Options
ASI standard: EN50083-9
DVB-S2 multi-transport stream via additional Ericsson G.703 (FAZ 101 0113/8)
license
Connector: BNC (F)
LNB Power: 13V, 18V or off, 22 kHz on/off
Network: G.703 compliant PDH
Input: E3 or DS-3 (selectable)
License key dependant
Bit-rates: 34 Mbps or 45 Mbps versions *Check availability
03-2013-v10
SPECIFICATIONS Ericsson RX8200 Advanced Modular Receiver
Single service descrambling Closed captions, DVB Subtitle burn-in, SD Audio Pass-through only
resolution Teletext burn-in
Mutually exclusive with other CA types
WST, Inverted Teletext, EBU Teletext JPEG-2000 HD
subtitles and non-subtitles, WSS, VITC, VITC
RAS Decryption (FAZ 101 0113/52) in PES, VPS, Video Index, AFD Pass- Profile: 4:2:2
Decryption of Ericsson RAS 1 through, VANC data-piping, Service name in Max. video rate: 200 Mbps
VANC, monochrome samples, OP47 pass- Video format: 1080i at 25 & 29.97 fps and
through* 720p at 50 and 59.94 fps
Stream Processing Options VITS, NABTS, AMOL 48, AMOL 96, TV Audio pass-through only
Guide
Single Service Filtering (FAZ 101 0113/53)
SPECIFICATIONS
Video Processing Options Audio Options 4x Audio Capability (FAZ 101 0113/20)
Extends licensed audio decodes to more
High Quality Down-conversion Balanced Audio Output (FAZ 101 0113/3) channels
(FAZ 101 0113/60) Connector: 2x 9-Pin D-type 8x MPEG-1 Layer II audio decode
Grade 1 quality down-conversion Analog audio: two balanced stereo pairs 6x Dolby® Digital 2.0 decode, 5.1 to 2.0 down-
Simultaneous Down-conversion (HD to SD): Digital audio: two balanced stereo pairs mix
center cut out, manual/AFD controlled
Order QTY 0, 1 or (2 - requires RX8200/ 4x Dolby® Digital 2.0/5.1 pass-through -
Down-conversion from 1080p 50/60 to 1080i, SWO/4AUD) compressed and embedded in (HD)SDI
720p or SD
4x Dolby® Digital Plus 2.0/5/1 pass-through -
compressed and embedded in (HD)SDI
Standard with any Video Decode Option:
Down-conversion (FAZ 101 0113/26) 6x 5.1 AAC down-mix to 2.0
2x MPEG-1 Layer-II audio decode
Grade 2 quality down-conversion from 1080i ®
2x Dolby Digital Plus Pass-through 6x 2.0 AAC decode
or 720p
®
2x Dolby E pass-through 4x Dolby®E pass-through
Simultaneous Down-conversion (HD to SD):
full frame, center cut out, letter box, 2x Linear PCM decode 4x Linear PCM pass-through
anamorphic - manual/AFD controlled
Audio sampling rate: 48 kHz
Physical and Power
Decoded audio gain adjustment
Up-conversion (FAZ 101 0113/54)
Dimensions (W x D x H)
Non-simultaneous up-conversion (SD to HD): Dolby® Digital (FAZ 101 0113/22)
To 720p or 1080i (4:2:0 modes only) 442.5 x 545 x 44mm (17.5“ x 20.7“ x 1.75“
2x Dolby® Digital 5.1 decode and down-mix to approx.)
2.0
Input Voltage
Cross-conversion (FAZ 101 0113/55) 2x Dolby® Digital 2.0/5.1 pass-through 110 VAC / 240 VAC
Non-simultaneous cross-conversion 720p to compressed and embedded in (HD)SDI
1080i or 1080 to 720p Power Consumption
1x Dolby® Digital 5.1 decode
No frame rate conversion 120W Max. (depending on options fitted)
Cooling
Dolby® Digital Plus*
Aspect Ratio Conversion Integrated fan
2x Dolby® Digital Plus 2.0/5.1 pass-through
16:9 to 4:3 center cut ARC in SD modes
compressed and embedded in (HD)SDI
Environmental Conditions
Frame Synchronization
AAC Audio (FAZ 101 0113/21) Operating Temperature
(FAZ 101 0113/33)
2x 5.1 down-mix to 2.0 0°C to +50°C (32° to 122°F)
Enables Frame Sync
2x 2.0 decode Storage Temperature
Connector: 1x BNC (F) 75 Ohm
1x 5.1 decode -20°C to +60°C (-4° to 140°F)
Input signal: Analog SD Hsync (black & burst)
Relative Humidity
Data and Control Options Phase Aligned Audio (FAZ 101 0113/49) 5% to 95%
MPEG-1 Layer II audio
RS232 Remote Control and Data (FAZ 101 2x phase aligned groups of 4x stereo pairs, Compliance
0113/17) Phase aligned to enable 5.1 carriage
Remote control connector: 1x 9-pin D-type CE marked in accordance with EU Low
Requires 4x audio license FAZ 101 0113/20 Voltage and EMC Directives
RS232 remote control
EMC Compliance
Ericsson Alteia protocol
EN55022, EN61000-3-2, EN61000-3-3,
RS232 data connector: 1x 9-pin D-type EN55024, CISPR22, FCC CFR47 Part 15B
RS232 asynchronous data Class A
RS232 data rate: Max. 38.4 kbps Safety Compliance
EN60950-1, IEC60950-1, UL60950-1
IP High Speed Data (FAZ 101 0113/35)
MPE based data de-encapsulation
Max. bit-rate: 100 Mbps
Requires IP TS output card
License key dependant
*Check availability
Tel: +1 (678) 812 6300 Tel: +852 2590 2388 Tel: +61 2 9111 4999 Tel: +44 (0)23 8048 4000
Email: tvsalesamericas@ericsson.com Email: tvsalesapac@ericsson.com Email: tvsalesanz@ericsson.com Email: tvsalesemea@ericsson.com