Spray Nozzles Catalog

DOCTOR, CLEANING, FILTRATION
Spray Nozzle Catalog

A guide to spray nozzle selection
A selection guide
to nozzles that will
optimize your showering
applications.
K A D A N T S O L U T I O N S DIVISION
How to Use This Catalog
How to identify, specify, and order
Kadant spray nozzles and parts
Use the PDF search feature to find a specific spray nozzle number.
Identification
Each type of Kadant spray nozzle is uniquely identified using a two letter designation called the Nozzle Series. Spray
nozzle characteristics are specified along with the complete spray nozzle code.
Example ordering information
JN XX X XX XXX
Nozzle Description Description Description Description

Series
Examine the photo and dimensional drawing

The dimensional drawings and spray nozzle photos aid in easier part and part number identification. The accompanying
charts, spray nozzle descriptions, and flow data will allow the correct spray nozzle to be specified for the application.
Check performance figures and specifications

This catalog contains an individual flow rate chart for each type of Kadant spray nozzle. Flows at various pressures
are available for every orifice/fan angle offered. The fan nozzle coverage chart is available on the following page.
Construction details and the design pressures are published for each spray nozzle offered.
Ordering
Parts can be ordered using the new spray nozzle code with the two letter prefix, the old spray nozzle codes/part
numbers found in the Parts Cross Reference section 9, or any part numbers previously used for order placement.
To place an order, please call 508-791-8171 to speak with our customer service department. Order and quote requests
can also be emailed to info@kadant.com.
Warranty
Kadant warrants that, upon delivery, all spray nozzles and spray nozzle parts will perform according to printed
specifications when properly installed. If the spray nozzle fails to perform properly under these conditions for reasons
due to original workmanship or materials, Kadant will replace the non-performing spray nozzle or spray nozzle part
with a like spray nozzle or spray nozzle part.
2
Table of Contents
Jet Nozzles................................................................................................................................ 5
• Series JN • Series JJ • Series BB • Series SB
Fan Nozzles............................................................................................................................. 15
• Series VF • Series V • Series FF • Series FH • Series FL
Brush Shower Fan/Jet Nozzles.............................................................................................. 43
• Series BF • Series BT • Series BZ
Disc Fan/Jet Nozzles............................................................................................................... 56
• Series DF • Series DJ • Series DL • Series DS
Self Purging Nozzles.............................................................................................................. 70
• Series PN • Series PT • Series PP
Trim Squirt Nozzles................................................................................................................ 80
• Series TG and TT • Series TS • VersaTrim System
Quick Connect Nozzles.......................................................................................................... 89
• Series QT • Series QV
Tools and Accessories.......................................................................................................... 100
Technical Information and Related Products.................................................................... 107
Parts Cross Reference.......................................................................................................... 114
3
ArresTech™ Spray Nozzle
Enhancement
ArresTech spray nozzle enhancement is a proprietary plating technology. ArresTech spray nozzle enhancement imparts
hardness, abrasion resistance, and lubricity to the base metal. ArresTech spray nozzle enhancement performance
characteristics combine to:
1. Prevent thread galling during nozzle installation and removal.
2. Extend the life of the base metal increasing shower nozzle life, and preserving the design integrity of the part,
allowing spray patterns to remain precise longer.
3. Accelerate nozzle installation, removal, and inspection.
Galling and nozzle wear

While austenitic 300 series stainless steels offer good corrosion resistance, the low hardness results in poor wear
performance and contributes to susceptibility to galling. Galling occurs when the stainless steel oxide surface film
breaks down as a result of direct metal contact. The symptoms of galling include surface damage, and the seizing and
freezing up of equipment. Galling is a severe form of adhesive wear which initially shows up as torn areas on the metal
surface. Threads (both straight and NPT) are particularly susceptible to galling due to high friction. On “non-wear”
parts such as pipe fittings, nozzle bases, and nozzle retainer nuts, thread tears will eventually result in the need for part
replacement. In extreme cases, solid-phase welding can take place (whereby material is transferred from one surface to
another) causing the stainless-to-stainless threads to bond together making disassembly difficult or impossible.
Installation costs
Many maintenance managers don’t admit to having “nozzle galling problems.” They fail to see that just the potential
for stainless-to-stainless galling slows down maintenance tasks which increases costs. To prevent galling, maintenance
personnel must work carefully and apply anti-galling compounds and tapes. If severe galling does occur, a three hour
nozzle replacement job can easily become six or eight hours for bases to be re-tapped, or in extreme cases, to have
nozzles welded into position to stop leaks. But even three hours to change nozzles is too long when a faster, less costly
alternative exists.
ArresTech spray nozzle enhancement stops thread galling — speeds installation

To prevent thread galling, one of the two mating threads is plated with ArresTech spray nozzle enhancement. In a lab
test, a four inch diameter NPT type 316 stainless steel pipe cap plated with ArresTech spray nozzle enhancement was
dry assembled and disassembled to a standard 316L stainless steel nipple over 30 times without any evidence of thread
tears. An unplated cap failed due to thread tears during its first dry-assembly. ArresTech spray nozzle enhancement
plated 9/16-24 thread, needle-jet nozzles may be dry-installed in standard bases (without anti-galling lubricant or tape)
using a power wrench. Nozzle change time for a typical shower will decrease from hours to just minutes!
ArresTech spray nozzle enhancement extends nozzle life — minimizes fouling

By making the surface of a 316 stainless steel nozzle as hard as a high-speed drill bit, ArresTech spray nozzle
enhancement extends nozzle life. While an ArresTech spray nozzle enhancement plated nozzle will not out-wear
ceramic, ruby, or sapphire, it will outwear type 316 stainless steel over two to one. Additionally, since the ArresTech
spray nozzle enhancement plated nozzle is much less susceptible to damage while cleaning, its useful life may
prove longer.
4
Jet Nozzles
JN JJ
BB SB
Products
u Series JN Needle Jet Nozzle................................................................................6
u Series JJ Needle Jet Nozzle with Jeweled or Ceramic Insert.................................9
u Series BB Button Base Needle Jet Nozzle..........................................................11
u Series SB Silver Bullet Needle Jet Nozzle...........................................................13
Contact Kadant Solutions Division for additional sizes. Dimensions are for reference only and subject to change.
Go to Main TOC 5
Needle Jet Nozzles
Series JN Needle Jet Nozzle
Nozzle Characteristics Components
The JN needle jet nozzle is designed to deliver a solid
stream of water at a wide range of pressures. An integral Nozzle, Jet
nozzle extension can be supplied for showers with nozzles O-Ring, Buna-N, 1158014001
installed in the 3 to 9 o’clock position. Fluid is supplied to Nozzle, Jet, with Extension
the nozzle from the center of the pipe preventing settled Internal extensions are used when nozzles
contaminants from plugging the nozzle. are located in 3 to 9 o’clock positions.
Construction Base, Nozzle*

Standard material is 316SS. To prevent galling, ArresTech 124N – 9/16”-24
plated stainless steel is available as an option. The nozzles *Welded to shower – not normally replaced.
are designed for use in systems that operate up to
1000 psig. *For other bases consult Kadant Solutions.
11/16"
0.57"
*** O-Ring
2.4"
or
4.4"
**O-Ring only included with ArresTech plated nozzles that

have connection sizes of 1/4” BSPP and 9/16” – 24.
Jet Nozzle Ordering Information Nozzle Length Code Connection Size/Type Code
0.57” 0 1/4” NPT 1/4
JN 9U 2 A 04
2.4” 1 1/4” BSPT 4B
Nozzle
4.4” 2 9/16” – 24 9U
Series Length Orifice
1/4” BSPP 4B
Number
Connection Construction Construction Material Code
Material ArresTech Plated 316SS*** A
316SS S
***Available for orifice sizes 0.023” and larger.
6 Go to Jet Nozzles Tab

Flow Rate (Gallons per Minute)

Nozzle Orifice Pressure (PSI)
Orifice Number
(inch) 20 40 60 80 100 200 400 600 800 1000
010 0.010 0.008 0.012 0.014 0.016 0.018 0.026 0.036 0.045 0.051 0.058
014 0.014 0.016 0.023 0.028 0.032 0.036 0.051 0.071 0.087 0.101 0.113
016 0.016 0.021 0.030 0.036 0.042 0.047 0.066 0.093 0.114 0.132 0.148
020 0.020 0.033 0.046 0.056 0.065 0.073 0.103 0.146 0.179 0.206 0.231
023 0.023 0.043 0.061 0.075 0.086 0.096 0.136 0.193 0.236 0.273 0.305
026 0.026 0.055 0.078 0.095 0.110 0.123 0.174 0.246 0.302 0.348 0.390
028 0.028 0.064 0.090 0.110 0.128 0.143 0.202 0.285 0.350 0.403 0.451
033 0.033 0.089 0.125 0.153 0.177 0.198 0.280 0.396 0.486 0.560 0.626
035 0.035 0.100 0.141 0.172 0.199 0.223 0.315 0.445 0.547 0.629 0.704
038 0.038 0.118 0.166 0.204 0.235 0.263 0.372 0.526 0.645 0.744 0.832
040 0.040 0.130 0.184 0.225 0.260 0.291 0.412 0.582 0.714 0.823 0.920
047 0.047 0.180 0.255 0.312 0.360 0.403 0.569 0.805 0.986 1.139 1.273
052 0.052 0.220 0.312 0.382 0.441 0.493 0.697 0.986 1.207 1.394 1.558
055 0.055 0.246 0.348 0.426 0.492 0.550 0.778 1.100 1.350 1.556 1.740
060 0.060 0.293 0.415 0.508 0.587 0.656 0.928 1.312 1.607 1.856 2.075
070 0.070 0.399 0.565 0.692 0.799 0.893 1.263 1.786 2.187 2.526 2.824
093 0.093 0.705 0.997 1.221 1.410 1.576 2.229 3.152 3.861 4.458 4.984
107 0.107 0.933 1.320 1.616 1.866 2.086 2.951 4.173 5.111 5.901 6.598
125 0.125 1.273 1.801 2.206 2.547 2.848 4.027 5.695 6.975 8.054 9.005
129 0.129 1.356 1.918 2.349 2.713 3.033 4.289 6.065 7.429 8.578 9.590
156 0.156 1.983 2.805 3.435 3.967 4.435 6.272 8.870 10.864 12.544 14.025
172 0.172 2.411 3.410 4.176 4.822 5.391 7.625 10.783 13.206 15.249 17.049
187 0.187 2.850 4.031 4.936 5.700 6.373 9.013 12.746 15.610 18.025 20.153
203 0.203 3.359 4.750 5.817 6.717 7.510 10.621 15.020 18.396 21.242 23.749
219 0.219 3.909 5.528 6.770 7.818 8.741 12.361 17.481 21.410 24.722 27.640
250 0.250 5.094 7.204 8.823 10.188 11.390 16.108 22.780 27.900 32.216 36.019
Go to Jet Nozzles Tab 7

Flow Rate (Liters per Minute)

Pressure kPa (Bars)
Nozzle Orifice
Orifice Number 100 200 300 400 600 800 1000 2000 4000 7000
(mm)
1.0 2.0 3.0 4.0 6.0 8.0 10.0 20.0 40.0 70.0
010 0.254 0.026 0.037 0.046 0.053 0.064 0.074 0.083 0.117 0.166 0.220
014 0.356 0.051 0.073 0.089 0.103 0.126 0.146 0.163 0.230 0.326 0.431
016 0.406 0.067 0.095 0.116 0.135 0.165 0.190 0.213 0.301 0.425 0.563
020 0.508 0.105 0.149 0.182 0.210 0.257 0.297 0.332 0.470 0.665 0.879
023 0.584 0.139 0.197 0.241 0.278 0.340 0.393 0.440 0.622 0.879 1.163
026 0.660 0.178 0.251 0.308 0.355 0.435 0.502 0.562 0.794 1.123 1.486
028 0.711 0.206 0.291 0.356 0.411 0.504 0.581 0.650 0.919 1.300 1.720
033 0.838 0.286 0.405 0.496 0.572 0.653 0.754 0.905 1.280 1.810 2.394
035 0.889 0.321 0.454 0.556 0.642 0.786 0.907 1.014 1.435 2.029 2.684
038 0.965 0.379 0.537 0.657 0.759 0.866 1.000 1.200 1.697 2.399 3.174
040 1.016 0.420 0.593 0.727 0.839 1.028 1.187 1.327 1.876 2.653 3.510
047 1.194 0.580 0.821 1.005 1.161 1.422 1.642 1.835 2.595 3.671 4.856
052 1.321 0.710 1.005 1.230 1.421 1.740 2.009 2.247 3.177 4.493 5.944
055 1.397 0.793 1.122 1.374 1.586 1.943 2.243 2.508 3.547 5.016 6.636
060 1.524 1.111 1.571 1.924 2.221 2.484 3.512 4.967 6.083 7.024 7.854
070 1.778 1.287 1.821 2.230 2.575 3.153 3.641 4.071 5.757 8.142 10.771
093 2.362 2.272 3.214 3.936 4.545 5.566 6.427 7.186 10.162 14.371 19.012
107 2.718 3.008 4.254 5.210 6.016 7.368 8.508 9.512 13.452 19.024 25.166
125 3.175 4.105 5.806 7.110 8.211 10.055 11.611 12.982 18.359 25.963 34.346
129 3.277 4.371 6.183 7.572 8.744 10.709 12.366 13.826 19.552 27.651 36.579
156 3.962 6.393 9.042 11.074 12.788 15.661 18.084 20.219 28.594 40.437 53.493
172 4.369 7.771 10.992 13.462 15.546 19.038 21.984 24.579 34.760 49.157 65.029
187 4.750 9.186 12.993 15.913 18.375 22.504 25.985 29.053 41.087 58.105 76.866
203 5.156 10.825 15.312 18.752 21.654 26.519 30.622 34.237 48.419 68.474 90.582
219 5.563 12.599 17.821 21.825 25.202 30.865 35.640 39.847 56.352 79.693 105.424
250 6.350 16.418 23.223 28.441 32.842 40.221 46.444 51.926 73.435 103.852 137.382

Needle Jet Nozzles
Series JJ Needle Jet Nozzle
with Jeweled or Ceramic Insert
The JJ needle jet nozzle uses a Duracerm ceramic, ruby or
Nozzle, Jet
sapphire insert material and is designed to deliver a solid
O-Ring, Buna-N, 1158014001
stream of water at a wide range of pressures. Ruby and
sapphire inserts have excellent erosion resistance to liquid Nozzle, Jet, with Extension
flow, maximizing nozzle life. Duracerm ceramic is one of Internal extensions are used when nozzles
the toughest shower nozzle materials available. It will are located in 3 to 9 o’clock positions.
withstand thermal shock and provide long life compared
with stainless steel. An integral nozzle extension can be Base, Nozzle*
supplied for showers with nozzles installed in the 3 to 9 124N – 9/16”-24
o’clock position. Fluid is supplied to the nozzle from the *Welded to shower – not normally
center of the pipe preventing settled contaminants from replaced.
plugging the nozzle.
*For other bases
consult Kadant Solutions.
Construction
All JJ series nozzles are 316SS plated with ArresTech to
prevent thread galling during installation. The standard
nozzles are designed for use in systems that operate up to 11/16"
1000 psig. Sapphire nozzles are available with a 5000 psig
design option.
0.49" 2.4"
or
4.4"
** O-Ring
Insert Disk
**O-Ring only included with 9/16” – 24 threads.
0.57” 0 1/4” NPT 1/4
JJ 9U P 2 A 040 HP 2.4” 1 1/4” BSPT 4B
Nozzle Design 4.4” 2 9/16” – 24 9U
Length Orifice
Series Number Pressure
Insert Construction Material Code Insert Material Code
Connection Material ArresTech Plated 316SS A Ruby R
Construction
Material Sapphire P
Design Pressure Code Duracerm D
1000 PSIG –
5000 PSIG *** HP
***Only available with sapphire insert.

Series JJ Needle Jet Nozzle
Jeweled or Ceramic Insert
Sizes Available Pressure (PSI)
Nozzle
Orifice
Duracerm Ruby/ Sapphire Orifice (inch) 20 40 60 80 100 200 400 600 800 1000
x J005 0.005 0.002 0.003 0.004 0.004 0.005 0.006 0.009 0.011 0.013 0.014
x J008 0.008 0.005 0.007 0.009 0.010 0.012 0.016 0.023 0.028 0.033 0.037
x J010 0.010 0.008 0.012 0.014 0.016 0.018 0.026 0.036 0.045 0.051 0.058
x J012 0.012 0.012 0.017 0.020 0.023 0.026 0.037 0.052 0.064 0.074 0.083
x J015 0.015 0.018 0.026 0.032 0.037 0.041 0.058 0.082 0.100 0.116 0.129
x J016 0.016 0.021 0.030 0.036 0.042 0.047 0.066 0.093 0.114 0.132 0.148
x J018 0.018 0.026 0.037 0.046 0.053 0.059 0.083 0.118 0.144 0.167 0.186
x J020 0.020 0.033 0.046 0.056 0.065 0.073 0.103 0.146 0.178 0.206 0.230
x J024 0.024 0.043 0.061 0.075 0.086 0.096 0.136 0.192 0.236 0.272 0.304
x J025 0.025 0.051 0.072 0.088 0.102 0.114 0.161 0.227 0.278 0.322 0.360
x J028 0.028 0.064 0.090 0.110 0.128 0.143 0.202 0.285 0.349 0.403 0.451
x J030 0.030 0.073 0.104 0.127 0.146 0.164 0.232 0.327 0.401 0.463 0.518
x J032 0.032 0.083 0.118 0.145 0.167 0.187 0.264 0.373 0.457 0.528 0.590
x J033 0.033 0.089 0.125 0.153 0.177 0.198 0.280 0.396 0.485 0.560 0.626
x J035 0.035 0.100 0.141 0.172 0.199 0.223 0.315 0.445 0.545 0.629 0.704
x x J040 0.040 0.130 0.184 0.225 0.260 0.291 0.412 0.582 0.713 0.823 0.920
x J048 0.048 0.188 0.266 0.325 0.376 0.420 0.594 0.840 1.029 1.188 1.328
x J055 0.055 0.066 0.348 0.426 0.492 0.550 0.778 1.100 1.348 1.556 1.740

Sizes Available Pressure kPa (Bars)
Nozzle
Orifice Orifice 100 200 300 400 600 800 1000 2000 4000 7000
Duracerm Ruby/ Sapphire Nozzle (mm)
Number 1.0 2.0 3.0 4.0 6.0 8.0 10.0 20.0 40.0 70.0
x J005 0.127 0.007 0.009 0.011 0.013 0.016 0.019 0.021 0.029 0.041 0.055
x J008 0.008 0.017 0.024 0.029 0.033 0.041 0.047 0.053 0.075 0.106 0.140
x J010 0.254 0.026 0.037 0.045 0.052 0.064 0.074 0.083 0.117 0.166 0.219
x J012 0.305 0.038 0.054 0.066 0.076 0.086 0.100 0.120 0.169 0.239 0.317
x J015 0.381 0.059 0.083 0.102 0.118 0.144 0.167 0.187 0.264 0.373 0.494
x J016 0.406 0.067 0.095 0.116 0.135 0.153 0.177 0.213 0.301 0.425 0.563
x J018 0.457 0.085 0.120 0.147 0.170 0.208 0.240 0.269 0.380 0.537 0.711
x J020 0.508 0.105 0.148 0.182 0.210 0.257 0.297 0.332 0.469 0.663 0.877
x J024 0.584 0.139 0.196 0.240 0.277 0.340 0.392 0.439 0.620 0.877 1.16
x J025 0.635 0.164 0.232 0.284 0.328 0.401 0.463 0.518 0.733 1.04 1.37
x J028 0.711 0.206 0.291 0.356 0.411 0.504 .581 0.650 0.919 1.30 1.72
x J030 0.762 0.236 0.334 0.409 0.472 0.578 0.667 0.746 1.06 1.49 1.97
x J032 0.813 0.269 0.380 0.466 0.538 0.614 0.709 0.851 1.203 1.702 2.251
x J033 0.838 0.286 0.404 0.495 0.571 0.699 0.808 0.903 1.28 1.81 2.39
x J035 0.889 0.321 0.454 0.556 0.642 0.786 0.907 1.014 1.43 2.03 2.68
x x J040 1.02 0.420 0.593 0.727 0.839 1.03 1.19 1.33 1.88 2.65 3.51
x J048 1.22 0.605 0.85609 1.048 1.211 1.381 1.596 1.914 2.707 3.828 5.064
x J055 1.40 0.793 1.12 1.37 1.59 1.94 2.24 2.51 3.55 5.02 6.64

Needle Jet Nozzles
Series BB Needle Jet Nozzle

The BB needle jet nozzle is designed to deliver a solid
Nozzle, Jet
stream of water at a wide range of pressures.
Construction
All BB series nozzles are constructed of 316SS and are
available with ArresTech plating as an option. The nozzles
are designed for use in systems that operate up to 1000 Nozzle Base*
psig. 124L – 1/4”-28
*Welded to shower – not normally
replaced.
5/16"
0.53"
Jet Nozzle Ordering Information Construction Material Code Connection Size/Type Code
ArresTech Plated 316SS** A 1/4”– 28 4U
BB 4U A 040
316SS S
Nozzle Orifice Duracerm D
Series Number Ruby R
Connection Construction **Available for orifice sizes 0.023”
Material and larger.

Series BB Needle Jet Nozzle

Sizes Available Pressure (PSI)
Nozzle
316 Orifice
Ruby/ Orifice
Stainless Duracerm Number 20 40 60 80 100 200 400 600 800 1000
Sapphire (inch)
Steel
x 005 0.005 0.002 0.003 0.004 0.004 0.005 0.006 0.009 0.011 0.013 0.014
x 008 0.008 0.005 0.007 0.009 0.010 0.012 0.016 0.023 0.028 0.033 0.037
x 010 0.010 0.008 0.012 0.014 0.016 0.018 0.026 0.036 0.045 0.051 0.058
x 015 0.015 0.018 0.026 0.032 0.037 0.041 0.058 0.082 0.100 0.116 0.129
x 018 0.018 0.026 0.037 0.046 0.053 0.059 0.083 0.118 0.144 0.167 0.186
x x 020 0.020 0.033 0.046 0.056 0.065 0.073 0.103 0.146 0.178 0.206 0.230
023 0.023 0.043 0.061 0.075 0.086 0.096 0.136 0.192 0.236 0.272 0.304
x 024 0.024 0.047 0.066 0.081 0.094 0.105 0.148 0.210 0.257 0.297 0.332
x 025 0.025 0.051 0.072 0.088 0.102 0.114 0.161 0.227 0.278 0.322 0.360
x x 028 0.028 0.064 0.090 0.110 0.128 0.143 0.202 0.285 0.349 0.403 0.451
x 030 0.030 0.073 0.104 0.127 0.146 0.164 0.232 0.327 0.401 0.463 0.518
x x 033 0.033 0.089 0.125 0.153 0.177 0.198 0.280 0.396 0.485 0.560 0.626
x 035 0.035 0.100 0.141 0.172 0.199 0.223 0.315 0.445 0.545 0.629 0.704
x x x 040 0.040 0.130 0.184 0.225 0.260 0.291 0.412 0.582 0.713 0.823 0.920
x 049 0.049 0.195 0.276 0.338 0.390 0.437 0.617 0.873 1.069 1.235 1.380
x x 055 0.055 0.246 0.348 0.426 0.492 0.550 0.778 1.100 1.348 1.556 1.740
x 070 0.070 0.399 0.564 0.690 0.797 0.891 1.261 1.783 2.183 2.521 2.819
x 093 0.093 0.719 1.017 1.245 1.438 1.607 2.273 3.215 3.937 4.546 5.083
x 125 0.125 1.271 1.798 2.202 2.542 2.842 4.019 5.684 6.962 8.039 8.988

Sizes Available Pressure kPa (Bars)
Nozzle
316 Orifice 100 200 300 400 600 800 1000 2000 4000 7000
Ruby/ Orifice
Stainless Duracerm Number
Sapphire (mm)
Steel 1.0 2.0 3.0 4.0 6.0 8.0 10.0 20.0 40.0 70.0
x 005 0.127 0.007 0.009 0.011 0.013 0.016 0.019 0.021 0.029 0.041 0.055
x 008 0.008 0.017 0.024 0.029 0.033 0.041 0.047 0.053 0.075 0.106 0.140
x 010 0.254 0.026 0.037 0.045 0.052 0.064 0.074 0.083 0.117 0.166 0.219
x 015 0.381 0.059 0.083 0.102 0.118 0.144 0.167 0.187 0.264 0.373 0.494
x 018 0.457 0.085 0.120 0.147 0.170 0.208 0.240 0.269 0.380 0.537 0.711
x x 020 0.508 0.105 0.148 0.182 0.210 0.257 0.297 0.332 0.469 0.663 0.877
023 0.584 0.139 0.196 0.240 0.277 0.340 0.392 0.439 0.620 0.877 1.160
024 0.610 1.359 1.922 2.354 2.719 3.102 3.583 4.298 6.079 8.596 11.372
x 025 0.635 0.164 0.232 0.284 0.328 0.401 0.463 0.518 0.733 1.036 1.371
x x 028 0.711 0.206 0.291 0.356 0.411 0.504 0.581 0.650 0.919 1.300 1.720
x 030 0.762 0.236 0.334 0.409 0.472 0.578 0.667 0.746 1.055 1.492 1.974
x x 033 0.838 0.286 0.404 0.495 0.571 0.699 0.808 0.903 1.277 1.806 2.389
x 035 0.035 0.321 0.454 0.556 0.642 0.786 0.907 1.014 1.435 2.029 2.684
x x x 040 1.016 0.420 0.593 0.727 0.839 1.028 1.187 1.327 1.876 2.653 3.510
x 049 1.245 0.631 0.892 1.093 1.262 1.439 1.663 1.995 2.821 3.990 5.278
x x 055 1.397 0.793 1.122 1.374 1.586 1.943 2.243 2.508 3.547 5.016 6.636
x 070 1.780 1.280 1.820 2.230 2.570 3.150 3.630 4.060 5.746 8.126 10.749
x 093 2.360 2.320 3.280 4.010 4.630 5.680 6.550 7.330 10.361 14.653 19.384
x 125 3.180 4.100 5.790 7.100 8.190 10.000 11.600 13.000 18.322 25.911 34.278

Needle Jet Nozzles
Series SB Silver Bullet Needle Jet Nozzle
The SB needle jet nozzle is designed to deliver a solid
Nozzle, Jet
stream of water at a wide range of pressures. An integral
nozzle extension is included to prevent liquid from being
drawn from the bottom of the pipe, preventing settled
debris from plugging the nozzle. Please note that for
optimum performance, the nozzle should only be installed
on the lower half of the shower pipe (between 3 to 9
o’clock).
Construction
All SB series nozzles are constructed of 316SS and are
available with optional ArresTech plating. The nozzles are
designed for use in systems that operate up to 1000 psig.
7/16" 5/8"
1.13" or 1.625" 1.13" or 1.625" or 2.13"
1/8" 1/4"
NPT or NPT or
BSPT BSPT
1.13” 1 1/8” NPT 1/8
SB 1/4 2 A 040 1.625” 2 1/4” NPT 1/4
Nozzle Orifice 2.13” 3 1/8” BSPT 2B
Length 1/4” BSPT 4B
Series Number
Construction Material Code 1/8” BSPP 2P
Connection Construction
ArresTech Plated 316SS A 1/4” BSPP 4P
Material
316SS S 9/16”- 9/24” UNEF 9U
Available for orifice sizes 0.023” and
larger.

Series SB Silver Bullet Needle Jet Nozzle
Nozzle Nozzle Orifice Pressure (PSI)
Number (inch) 20 40 60 80 100 200 400 600 800 1000
010 0.010 0.008 0.012 0.014 0.016 0.018 0.026 0.036 0.045 0.051 0.058
014 0.014 0.016 0.023 0.028 0.032 0.036 0.050 0.071 0.087 0.101 0.113
020 0.020 0.033 0.046 0.056 0.065 0.073 0.103 0.146 0.178 0.206 0.230
028 0.028 0.064 0.090 0.110 0.128 0.143 0.202 0.285 0.349 0.403 0.451
033 0.033 0.089 0.125 0.153 0.177 0.198 0.280 0.396 0.485 0.560 0.626
038 0.038 0.117 0.166 0.203 0.235 0.263 0.371 0.525 0.643 0.743 0.831
040 0.040 0.130 0.184 0.225 0.260 0.291 0.412 0.582 0.713 0.823 0.920
047 0.047 0.180 0.254 0.311 0.359 0.402 0.568 0.804 0.984 1.14 1.27
055 0.055 0.246 0.348 0.426 0.492 0.550 0.778 1.10 1.35 1.56 1.74
061 0.061 0.303 0.428 0.524 0.605 0.677 0.957 1.35 1.66 1.91 2.14
067 0.067 0.365 0.516 0.632 0.730 0.817 1.15 1.63 2.00 2.31 2.58
070 0.070 0.399 0.564 0.690 0.797 0.891 1.26 1.78 2.18 2.52 2.82
078 0.078 0.495 0.700 0.857 0.990 1.11 1.57 2.21 2.71 3.13 3.50
086 0.086 0.602 0.851 1.04 1.20 1.35 1.90 2.69 3.30 3.81 4.25
093 0.093 0.719 1.02 1.24 1.44 1.61 2.27 3.21 3.94 4.55 5.08
107 0.107 0.931 1.32 1.61 1.86 2.08 2.95 4.17 5.10 5.89 6.59
125 0.125 1.27 1.80 2.20 2.54 2.84 4.02 5.68 6.96 8.04 8.99
141 0.141 1.62 2.29 2.80 3.23 3.62 5.11 7.23 8.86 10.2 11.4
156 0.156 1.98 2.80 3.43 3.96 4.43 6.26 8.85 10.8 12.5 14.0
172 0.172 2.41 3.40 4.17 4.81 5.38 7.61 10.8 13.2 15.2 17.0
187 0.187 2.88 4.07 4.98 5.75 6.43 9.09 12.9 15.7 18.2 20.3
203 0.203 3.35 4.74 5.81 6.70 7.50 10.6 15.0 18.4 21.2 23.7
219 0.219 3.90 5.52 6.76 7.80 8.72 12.3 17.4 21.4 24.7 27.6

Pressure kPa (Bars)
Nozzle Nozzle Orifice
Number (mm) 100 200 300 400 600 800 1000 2000 4000 7000
1.0 2.0 3.0 4.0 6.0 8.0 10.0 20.0 40.0 70.0
010 0.254 0.026 0.037 0.045 0.052 0.064 0.074 0.083 0.117 0.166 0.219
014 0.356 0.051 0.073 0.089 0.103 0.126 0.145 0.162 0.230 0.325 0.430
020 0.508 0.105 0.148 0.182 0.210 0.257 0.297 0.332 0.469 0.663 0.877
028 0.711 0.206 0.291 0.356 0.411 0.504 0.581 0.650 0.919 1.300 1.720
033 0.838 0.286 0.404 0.495 0.571 0.699 0.808 0.903 1.277 1.806 2.389
038 0.965 0.379 0.535 0.656 0.757 0.927 1.071 1.197 1.693 2.394 3.167
040 1.02 0.420 0.593 0.727 0.839 1.028 1.187 1.327 1.876 2.653 3.510
047 1.19 0.579 0.819 1.003 1.158 1.419 1.638 1.831 2.590 3.663 4.845
055 1.40 0.793 1.122 1.374 1.586 1.943 2.243 2.508 3.547 5.016 6.636
061 1.55 0.976 1.380 1.690 1.951 2.390 2.759 3.085 4.363 6.170 8.162
067 1.70 1.177 1.664 2.038 2.354 2.883 3.329 3.722 5.263 7.443 9.846
070 1.78 1.280 1.820 2.230 2.570 3.150 3.630 4.060 5.746 8.126 10.749
078 1.98 1.600 2.260 2.760 3.190 3.910 4.510 5.040 7.133 10.088 13.345
086 2.18 1.940 2.740 3.360 3.880 4.750 5.480 6.130 8.672 12.263 16.223
093 2.36 2.320 3.280 4.010 4.630 5.680 6.550 7.330 10.361 14.653 19.384
107 2.72 3.000 4.240 5.200 6.000 7.350 8.490 9.490 13.423 18.984 25.113
125 3.18 4.100 5.790 7.100 8.190 10.000 11.600 13.000 18.322 25.911 34.278
141 3.58 5.210 7.370 9.030 10.400 12.800 14.700 16.500 23.310 32.965 43.608
156 3.96 6.380 9.020 11.100 12.800 15.600 18.000 20.200 28.537 40.357 53.388
172 4.37 7.760 11.000 13.400 15.500 19.000 21.900 24.500 34.686 49.053 64.892
187 4.75 9.270 13.100 16.100 18.500 22.700 26.200 29.300 41.445 58.612 77.537
203 5.16 10.800 15.300 18.700 21.600 26.500 30.600 34.200 48.316 68.329 90.391
219 5.56 12.600 17.800 21.800 25.200 30.800 35.600 39.800 56.240 79.535 105.216

Fan Nozzles
VF VH
FH
FF FL
Products
u Series VF “V” Fan Nozzle.................................................................................. 16
u Series VH “V” Fan Insert Nozzle........................................................................ 25
u Series FF Flood Fan Nozzle................................................................................ 34
u Series FH Flood Fan Insert Nozzle...................................................................... 37
u Series FL Flat Fan Nozzle................................................................................... 40
Go to Main TOC 15
“V” Fan Nozzles
Series VF “V” Fan Nozzle
The VF Series “V” fan nozzle produces a flat fan-shaped “V” Fan Nozzle
spray pattern. It is available in a wide range of angles from
15° to 110° measured at 40 psig. The nozzle is available
with an optional 316SS, 50 mesh screen.
Construction
All VF Series nozzles are constructed of 316SS and are
are designed for use in systems that operate up to 300 psig.
Base, Nozzle*
124N – 9/16”-24
A24111 – 1/8” NPT
A23397 – 1/4” NPT
*Welded to shower – not normally replaced.
0.31" 0.31"
Wrench Flat Wrench Flat

0.562"
Hex Size Hex Size 1.00" 1.00"

Hex Size
(see chart) (see chart)
(see chart)
NPT and BSPT 0.438"

Hex. Sealing 1/4"-18
Sizes O-Ring NPT
9/16"-24
2.250"
Optional
Nozzle Filter
Screen
Fan Nozzle Ordering Information Construction Material Code

Connection Code Hex Size A
ArresTech Plated 316SS A
VF 9U A 015040 F 316SS S 1/4” NPT 1/4 0.625”
Nozzle
1/8” NPT 1/8 0.625”
Series Construction Filter
1/8” BSPT 2B 0.625”
Material Filter Code
1/4” BSPT 4B 0.625”
Connection Fan/Orifice No Filter – 9/16” – 24 9U 0.625”
Number 50 Mesh Screen F 3/8” NPT 3/8 0.75”
1/2” NPT 1/2 1.0”
3/4” NPT 3/4 1.25”
16 Go to Fan Nozzles Tab


Fan Angle Pressure (PSI) Fan Angle at psi*
Equivalent
(degree) at Code
Orifice (inch) 20 40 60 80 100 150 200 300 20 40 80
40 psi
N/A 000000 0 Nozzle Blank (316SS) - Used to Disable Flow
15026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 10 15 24
15036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 10 15 24
15040 0.040 0.177 0.250 0.306 0.354 0.395 0.484 0.559 0.685 10 15 24
15043 0.043 0.212 0.300 0.367 .424 0.474 0.581 0.671 0.822 11 15 24
15052 0.052 0.283 0.400 0.490 .566 0.632 0.775 0.894 1.10 11 15 21
15055 0.055 0.315 0.445 0.545 .629 0.704 0.862 0.995 1.22 11 15 21
15062 0.062 0.424 0.600 0.735 .849 0.949 1.16 1.34 1.64 11 15 21
15070 0.070 0.530 0.750 0.919 1.06 1.19 1.45 1.68 2.05 11 15 20
15
15078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 10 15 19
15093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 10 15 19
15109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 10 15 19
15141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 10 15 19
15156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 10 15 18
15172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.2 13.7 11 15 18
15187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 11 15 18
15203 0.203 4.95 7.00 8.57 9.90 11.1 13.6 15.7 19.2 11 15 18
25026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 14 25 34
25036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 15 25 33
25043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 14 25 33
25052 0.052 0.283 0.400 0.490 0.566 0.632 0.775 0.894 1.10 15 25 33
25057 0.057 0.354 0.500 0.612 0.707 0.791 0.968 1.12 1.37 16 25 32
25062 0.062 0.424 0.600 0.735 0.849 0.949 1.16 1.34 1.64 17 25 31
25072 0.072 0.566 0.800 0.980 1.13 1.26 1.55 1.79 2.19 17 25 31
25 25078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 18 25 31
25093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 18 25 31
25109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 19 25 31
25141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 19 25 31
25156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 21 25 29
25172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.2 13.7 21 25 29
25187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 22 25 29
25203 0.203 4.95 7.00 8.57 9.90 11.1 13.6 15.7 19.2 22 25 29
30055 0.055 0.315 0.445 0.545 0.629 0.704 0.862 0.995 1.22 21 30 37
30070 0.070 0.530 0.750 0.919 1.06 1.19 1.45 1.68 2.05 22 30 36
30093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 23 30 36
30 30156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 26 30 34
30187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 27 30 34
30219 0.219 5.66 8.00 9.80 11.30 12.60 15.5 17.9 21.9 27 30 34
30250 0.250 7.07 10.0 12.2 14.1 15.8 19.4 22.4 27.4 25 30 33
40026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 26 40 52
40031 0.031 0.106 0.150 0.184 0.212 0.237 0.290 0.335 0.411 27 40 52
40
40036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 29 40 51
40043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 30 40 50
*Angle measurements are for reference only. Contact Kadant Solutions Division for application-specific information.
Go to Fan Nozzles Tab 17


Equivalent
(degree) at Code
Orifice (inch) 20 40 60 80 100 150 200 300 20 40 80
40 psi
40052 0.052 0.283 0.400 0.490 0.566 0.632 0.775 0.894 1.10 30 40 50
40057 0.057 0.354 0.500 0.612 0.707 0.791 0.968 1.12 1.37 31 40 49
40062 0.062 0.424 0.600 0.735 0.849 0.949 1.16 1.34 1.64 31 40 49
40072 0.072 0.566 0.800 0.980 1.13 1.26 1.55 1.79 2.19 31 40 47
40078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 32 40 45
40093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 32 40 45
40 40109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 32 40 45
40141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 33 40 45
40156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 34 40 45
40172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.2 13.7 35 40 45
40187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 35 40 45
40203 0.203 4.95 7.00 8.57 9.90 11.1 13.6 15.7 19.2 35 40 45
40250 0.250 7.07 10.00 12.20 14.10 15.8 19.4 22.4 27.4 35 40 43
45040 0.040 0.177 0.250 0.306 0.354 0.395 0.484 0.559 0.685 35 45 55
45055 0.055 0.315 0.445 0.545 0.629 0.704 0.862 0.995 1.22 35 45 55
45070 0.070 0.530 0.750 0.919 1.06 1.19 1.45 1.68 2.05 36 45 53
45 45093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 37 45 51
45125 0.125 1.77 2.50 3.06 3.54 3.95 4.84 5.59 6.85 38 45 50
45156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 39 45 50
45187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 40 45 50
50026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 37 50 59
50036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 39 50 57
50043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 40 50 56
50052 0.052 0.283 0.400 0.490 0.566 0.632 0.775 0.894 1.10 42 50 56
50057 0.057 0.354 0.500 0.612 0.707 0.791 0.968 1.12 1.37 44 50 56
50062 0.062 0.424 0.600 0.735 0.849 0.949 1.16 1.34 1.64 45 50 56
50072 0.072 0.566 0.800 0.980 1.13 1.26 1.55 1.79 2.19 45 50 55
50 50078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 45 50 55
50093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 45 50 55
50109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 45 50 55
50141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 45 50 55
50156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 46 50 54
50172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.2 13.7 46 50 54
50187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 46 50 54
50203 0.203 4.95 7.00 8.57 9.90 11.1 13.6 15.7 19.2 46 50 54
60026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 47 60 69
60033 0.033 0.120 0.170 0.208 0.240 0.269 0.329 0.380 0.466 49 60 67
60040 0.040 0.177 0.250 0.306 0.354 0.395 0.484 0.559 0.685 50 60 66
60055 0.055 0.315 0.445 0.545 0.629 0.704 0.862 0.995 1.22 52 60 66
60
60070 0.070 0.530 0.750 0.919 1.06 1.19 1.45 1.68 2.05 54 60 65
60093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 55 60 65
60125 0.125 1.77 2.50 3.06 3.54 3.95 4.84 5.59 6.85 54 60 65
60156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 54 60 65


Equivalent
(degree) at Code
Orifice (inch) 20 40 60 80 100 150 200 300 20 40 80
40 psi
65013 0.013 0.018 0.025 0.031 0.035 0.040 0.048 0.056 0.068 44 65 77
65015 0.015 0.023 0.033 0.040 0.047 0.052 0.064 0.074 0.090 47 65 76
65021 0.021 0.047 0.067 0.082 0.095 0.106 0.130 0.150 0.183 50 65 75
65026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 51 65 74
65028 0.028 0.085 0.120 0.147 0.170 0.190 0.232 0.268 0.329 51 65 74
65031 0.031 0.106 0.150 0.184 0.212 0.237 0.290 0.335 0.411 51 65 74
65036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 52 65 73
65040 0.040 0.177 0.250 0.306 0.354 0.395 0.484 0.559 0.685 52 65 73
65043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 53 65 72
65052 0.052 0.283 0.400 0.490 0.566 0.632 0.775 0.894 1.10 53 65 72
65 65057 0.057 0.354 0.500 0.612 0.707 0.791 0.968 1.12 1.37 53 65 72
65062 0.062 0.424 0.600 0.735 0.849 0.949 1.16 1.34 1.64 54 65 72
65072 0.072 0.566 0.800 0.980 1.13 1.26 1.55 1.79 2.19 55 65 71
65078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 56 65 71
65093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 56 65 70
65109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 57 65 70
65141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 58 65 69
65156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 59 65 68
65172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.2 13.7 60 65 68
65187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 60 65 68
65203 0.203 4.95 7.00 8.57 9.90 11.1 13.6 15.7 19.2 60 65 68
73022 0.022 0.054 0.077 0.094 0.109 0.122 0.149 0.172 0.211 53 73 86
73032 0.032 0.109 0.154 0.189 0.218 0.243 0.298 0.344 0.422 55 73 84
73040 0.040 0.177 0.250 0.306 0.354 0.395 0.484 0.559 0.685 56 73 83
73
73045 0.045 0.218 0.308 0.377 0.436 0.487 0.596 0.689 0.843 58 73 82
73056 0.056 0.327 0.462 0.566 0.653 0.730 0.895 1.03 1.27 60 73 80
73072 0.072 0.566 0.800 0.980 1.13 1.26 1.55 1.79 2.19 64 73 74
80018 0.018 0.035 0.050 0.061 0.071 0.079 0.097 0.112 0.137 61 80 95
80021 0.021 0.047 0.067 0.082 0.095 0.106 0.130 0.150 0.183 67 80 94
80026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 68 80 89
80031 0.031 0.106 0.150 0.184 0.212 0.237 0.290 0.335 0.411 68 80 89
80036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 69 80 88
80043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 70 80 87
80052 0.052 0.283 0.400 0.490 0.566 0.632 0.775 0.894 1.10 71 80 86
80 80057 0.057 0.354 0.500 0.612 0.707 0.791 0.968 1.12 1.37 71 80 86
80062 0.062 0.424 0.600 0.735 0.849 0.949 1.16 1.34 1.64 72 80 85
80072 0.072 0.566 0.800 0.980 1.13 1.26 1.55 1.79 2.19 72 80 84
80078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 73 80 84
80093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 74 80 83
80109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 74 80 83
80141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 74 80 83
80156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 74 80 83


Equivalent
(degree) at Code
Orifice (inch) 20 40 60 80 100 150 200 300 20 40 80
40 psi
80172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.2 13.7 74 80 83
80 80187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 75 80 83
80203 0.203 4.95 7.00 8.57 9.90 11.1 13.6 15.7 19.2 75 80 83
90028 0.028 0.085 0.120 0.147 0.170 0.190 0.232 0.268 0.329 76 90 100
90033 0.033 0.120 0.170 0.208 0.240 0.269 0.329 0.380 0.466 77 90 100
90040 0.040 0.177 0.250 0.306 0.354 0.395 0.484 0.559 0.685 78 90 99
90043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 78 90 99
90
90055 0.055 0.315 0.445 0.545 0.629 0.704 0.862 0.995 1.22 79 90 97
90070 0.070 0.530 0.750 0.919 1.06 1.19 1.45 1.68 2.05 82 90 95
90093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 84 90 95
90125 0.125 1.77 2.50 3.06 3.54 3.95 4.84 5.59 6.85 85 90 95
95018 0.018 0.035 0.050 0.061 0.071 0.079 0.097 0.112 0.137 81 95 105
95026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 81 95 105
95031 0.031 0.106 0.150 0.184 0.212 0.237 0.290 0.335 0.411 82 95 105
95036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 82 95 105
95043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 83 95 104
95052 0.052 0.283 0.400 0.490 0.566 0.632 0.775 0.894 1.10 84 95 103
95057 0.057 0.354 0.500 0.612 0.707 0.791 0.968 1.12 1.37 84 95 102
95062 0.062 0.424 0.600 0.735 0.849 0.949 1.16 1.34 1.64 86 95 101
95 95072 0.072 0.566 0.800 0.980 1.13 1.26 1.55 1.79 2.19 87 95 100
95078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 89 95 100
95093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 90 95 100
95109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 90 95 100
95141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 91 95 101
95156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 92 95 100
95172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.2 13.7 93 95 99
95187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 93 95 99
95203 0.203 4.95 7.00 8.57 9.90 11.1 13.6 15.7 19.2 93 95 99
110022 0.022 0.054 0.077 0.094 0.109 0.122 0.149 0.172 0.211 94 110 121
110026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 94 110 121
110031 0.031 0.106 0.150 0.184 0.212 0.237 0.290 0.335 0.411 97 110 110
110036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 98 110 120
110043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 99 110 120
110052 0.052 0.283 0.400 0.490 0.566 0.632 0.775 0.894 1.10 100 110 119
110
110055 0.055 0.315 0.445 0.545 0.629 0.704 0.862 0.995 1.22 100 110 118
110062 0.062 0.424 0.600 0.735 0.849 0.949 1.16 1.34 1.64 101 110 117
110070 0.070 0.530 0.750 0.919 1.06 1.19 1.45 1.68 2.05 102 110 117
110078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 103 110 117
110093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 104 110 117
110109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 105 110 118


Fan Angle Code Equivalent Pressure kPa (Bar) Fan Angle at kPa (Bar)*
(degree) at Orifice (mm)
275 kPa 100 200 300 400 500 1000 1500 2000 138 275 552
1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00 1.38 2.75 5.52
15026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 10 15 24
15036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 10 15 24
15040 1.02 0.570 0.806 0.987 1.14 1.27 1.80 2.21 2.55 10 15 24
15043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 11 15 24
15052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 11 15 21
15055 1.40 1.01 1.43 1.76 2.03 2.27 3.21 3.93 4.54 11 15 21
15062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 11 15 21
15070 1.78 1.71 2.42 2.96 3.42 3.82 5.40 6.62 7.64 11 15 20
15
15078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 10 15 19
15093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 10 15 19
15109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 10 15 19
15141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 10 15 19
15156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 10 15 18
15172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 11 15 18
15187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 11 15 18
15203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 11 15 18
25026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 14 25 34
25036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 15 25 33
25043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 14 25 33
25052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 15 25 33
25057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 16 25 32
25062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 17 25 31
25072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 17 25 31
25 25078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 18 25 31
25093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 18 25 31
25109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 19 25 31
25141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 19 25 31
25156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 21 25 29
25172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 21 25 29
25187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 22 25 29
25203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 22 25 29
30055 1.40 1.01 1.43 1.76 2.03 2.27 3.21 3.93 4.54 21 30 37
30070 1.78 1.71 2.42 2.96 3.42 3.82 5.40 6.62 7.64 22 30 36
30093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 23 30 36
30 30156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 26 30 34
30187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 27 30 34
30219 5.56 18.2 25.8 31.6 36.5 40.8 57.7 70.6 81.5 27 30 34
30250 6.35 22.8 32.2 39.5 45.6 51.0 72.1 88.3 102.0 25 30 33
40026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 26 40 52
40 40031 0.787 0.342 0.483 0.592 0.684 0.764 1.08 1.32 1.53 27 40 52
40036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 29 40 51


Pressure kPa (Bar) Fan Angle at kPa (Bar)*
Fan Angle
Equivalent
(degree) at Code 100 200 300 400 500 1000 1500 2000 138 275 552
Orifice (mm)
275 kPa
1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00 1.38 2.75 5.52
40043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 30 40 50
40052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 30 40 50
40057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 31 40 49
40062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 31 40 49
40072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 31 40 47
40078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 32 40 45
40093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 32 40 45
40
40109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 32 40 45
40141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 33 40 45
40156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 34 40 45
40172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 35 40 45
40187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 35 40 45
40203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 35 40 45
40250 6.35 22.8 32.2 39.5 45.6 51.0 64.9 79.4 91.7 35 40 43
45040 1.02 0.570 0.806 0.987 1.14 1.27 1.80 2.21 2.55 35 45 55
45055 1.40 1.01 1.43 1.76 2.03 2.27 3.21 3.93 4.54 35 45 55
45070 1.78 1.71 2.42 2.96 3.42 3.82 5.40 6.62 7.64 36 45 53
45 45093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 37 45 51
45125 3.18 5.70 8.06 9.87 11.4 12.7 18.0 22.1 25.5 38 45 50
45156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 39 45 50
45187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 40 45 50
50026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 37 50 59
50036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 39 50 57
50043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 40 50 56
50052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 42 50 56
50057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 44 50 56
50062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 45 50 56
50072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 45 50 55
50 50078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 45 50 55
50093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 45 50 55
50109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 45 50 55
50141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 45 50 55
50156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 46 50 54
50172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 46 50 54
50187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 46 50 54
50203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 46 50 54
60026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 47 60 69
60033 0.838 0.387 0.548 0.671 0.775 0.866 1.23 1.50 1.73 49 60 67
60040 1.02 0.570 0.806 0.987 1.14 1.27 1.80 2.21 2.55 50 60 66
60
60055 1.40 1.01 1.43 1.76 2.03 2.27 3.21 3.93 4.54 52 60 66
60070 1.78 1.71 2.42 2.96 3.42 3.82 5.40 6.62 7.64 54 60 65
60093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 55 60 65


Fan Angle
Equivalent
(degree) at Code 100 200 300 400 500 1000 1500 2000 138 275 552
Orifice (mm)
275 kPa
1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00 1.38 2.75 5.52
60125 3.18 5.70 8.06 9.87 11.4 12.7 18.0 22.1 25.5 54 60 65
60
60156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 54 60 65
65013 0.330 0.057 0.081 0.099 0.114 0.127 0.180 0.221 0.255 44 65 77
65015 0.381 0.075 0.106 0.130 0.150 0.168 0.238 0.291 0.336 47 65 76
65021 0.533 0.153 0.216 0.264 0.305 0.341 0.483 0.591 0.683 50 65 75
65026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 51 65 74
65028 0.711 0.273 0.387 0.474 0.547 0.611 0.865 1.06 1.22 51 65 74
65031 0.787 0.342 0.483 0.592 0.684 0.764 1.08 1.32 1.53 51 65 74
65036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 52 65 73
65040 1.02 0.570 0.806 0.987 1.14 1.27 1.80 2.21 2.55 52 65 73
65043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 53 65 72
65052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 53 65 72
65 65057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 53 65 72
65062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 54 65 72
65072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 55 65 71
65078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 56 65 71
65093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 56 65 70
65109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 57 65 70
65141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 58 65 69
65156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 59 65 68
65172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 60 65 68
65187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 60 65 68
65203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 60 65 68
73022 .559 0.175 0.248 0.304 0.351 0.392 0.555 0.680 0.785 53 73 86
73032 .813 0.351 0.496 0.608 0.702 0.785 1.11 1.36 1.57 55 73 84
73040 1.02 0.570 0.806 0.987 1.14 1.27 1.80 2.21 2.55 56 73 83
73
73045 1.14 0.702 0.993 1.22 1.40 1.57 2.22 2.72 3.14 58 73 82
73056 1.42 1.05 1.49 1.82 2.11 2.35 3.33 4.08 4.71 60 73 80
73072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 64 73 74
80018 0.457 0.114 0.161 0.197 0.228 0.255 0.360 0.441 0.510 61 80 95
80021 0.533 0.153 0.216 0.264 0.305 0.341 0.483 0.591 0.683 67 80 94
80026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 68 80 89
80031 0.787 0.342 0.483 0.592 0.684 0.764 1.08 1.32 1.53 68 80 89
80036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 69 80 88
80043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 70 80 87
80 80052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 71 80 86
80057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 71 80 86
80062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 72 80 85
80072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 72 80 84
80078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 73 80 84
80093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 74 80 83
80109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 74 80 83


Fan Angle
Equivalent
(degree) at Code 100 200 300 400 500 1000 1500 2000 138 275 552
Orifice (mm)
275 kPa
1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00 1.38 2.75 5.52
80141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 74 80 83
80156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 74 80 83
80 80172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 74 80 83
80187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 75 80 83
80203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 75 80 83
90028 0.711 0.273 0.387 0.474 0.547 0.611 0.865 1.06 1.22 76 90 100
90033 0.838 0.387 0.548 0.671 0.775 0.866 1.23 1.50 1.73 77 90 100
90040 1.02 0.570 0.806 0.987 1.14 1.27 1.80 2.21 2.55 78 90 99
90043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 78 90 99
90
90055 1.40 1.01 1.43 1.76 2.03 2.27 3.21 3.93 4.54 79 90 97
90070 1.78 1.71 2.42 2.96 3.42 3.82 5.40 6.62 7.64 82 90 95
90093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 84 90 95
90125 3.18 5.70 8.06 9.87 11.4 12.7 18.0 22.1 25.5 85 90 95
95018 0.457 0.114 0.161 0.197 0.228 0.255 0.360 0.441 0.510 81 95 105
95026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 81 95 105
95031 0.787 0.342 0.483 0.592 0.684 0.764 1.08 1.32 1.53 82 95 105
95036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 82 95 105
95043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 83 95 104
95052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 84 95 103
95057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 84 95 102
95062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 86 95 101
95 95072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 87 95 100
95078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 89 95 100
95093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 90 95 100
95109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 90 95 100
95141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 91 95 101
95156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 92 95 100
95172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 93 95 99
95187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 93 95 99
95203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 93 95 99
110022 0.559 0.175 0.248 0.304 0.351 0.392 0.555 0.680 0.785 94 110 121
110026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 94 110 121
110031 0.787 0.342 0.483 0.592 0.684 0.764 1.08 1.32 1.53 97 110 110
110036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 98 110 120
110043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 99 110 120
110052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 100 110 119
110
110055 1.40 1.01 1.43 1.76 2.03 2.27 3.21 3.93 4.54 100 110 118
110062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 101 110 117
110070 1.78 1.71 2.42 2.96 3.42 3.82 5.40 6.62 7.64 102 110 117
110078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 103 110 117
110093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 104 110 117
110109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 105 110 118

Fan Insert Nozzles
Series VH “V” Fan Insert Nozzle
The VH “V” series fan insert nozzle produces a flat uniform
Nut, Nozzle Retainer
fan spray pattern. It’s available in a wide range of angles
3/4”-27 UNS
from 15° to 110°. The VH nozzle insert can be used in place
2007 – 316SS
of a DF or DJ series nozzle disc, or a FH nozzle insert. The
B36766 – 316SS with ArresTech plating
optional extension tube is available for nozzles installed
on the bottom of a shower pipe (3 to 9 o’clock) to prevent
debris from being drawn from the bottom of the pipe and “V” Hood
into the nozzle, causing it to plug.
Construction
All VH series nozzles are constructed of 316SS and are
available with ArresTech plating as an option. The nozzles Extension Tube (left)
are designed for use in systems that operate up to 300 psig. A-19691 Extension Tube, Internal, 1.2”
Spacer (right)
2148 (nylon)
2148A (316SS)
Base Nozzle
3/4”-27 UNS
2006C – Base Nozzle
0.31"
Wrench Flat
0.45"
0.58"
Fan Nozzle Ordering Information Construction Material Code

ArresTech Plated 316SS A
VH S 015040 316SS S
Nozzle
Series Fan/Orifice
Number
Construction
Material


Fan Angle Fan/Orifice Pressure (PSI) Fan Angle at psi*
Equivalent
(degree) at
Number Orifice (inch) 20 40 60 80 100 150 200 300 20 40 80
40 psi
15026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 10 15 24
15036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 10 15 24
15040 0.040 0.177 0.250 0.306 0.354 0.395 0.484 0.559 0.685 10 15 24
15043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 11 15 24
15052 0.052 0.283 0.400 0.490 0.566 0.632 0.775 0.894 1.10 11 15 21
15055 0.055 0.315 0.445 0.545 0.629 0.704 0.862 0.995 1.22 11 15 21
15062 0.062 0.424 0.600 0.735 0.849 0.949 1.16 1.34 1.64 11 15 21
15070 0.070 0.530 0.750 .919 1.06 1.19 1.45 1.68 2.05 11 15 20
15
15078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 10 15 19
15093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 10 15 19
15109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 10 15 19
15141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 10 15 19
15156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 10 15 18
15172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.2 13.7 11 15 18
15187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 11 15 18
15203 0.203 4.95 7.00 8.57 9.90 11.1 13.6 15.7 19.2 11 15 18
25026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 14 25 34
25036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 15 25 33
25043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 14 25 33
25052 0.052 0.283 0.400 0.490 0.566 0.632 0.775 0.894 1.10 15 25 33
25057 0.057 0.354 0.500 0.612 0.707 0.791 0.968 1.12 1.37 16 25 32
25062 0.062 0.424 0.600 0.735 0.849 0.949 1.16 1.34 1.64 17 25 31
25072 0.072 0.566 0.800 0.980 1.13 1.26 1.55 1.79 2.19 17 25 31
25 25078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 18 25 31
25093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 18 25 31
25109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 19 25 31
25141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 19 25 31
25156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 21 25 29
25172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.2 13.7 21 25 29
25187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 22 25 29
25203 0.203 4.95 7.00 8.57 9.90 11.1 13.6 15.7 19.2 22 25 29
30055 0.055 0.315 0.445 0.545 0.629 0.704 0.862 0.995 1.22 21 30 37
30070 0.070 0.530 0.750 0.919 1.06 1.19 1.45 1.68 2.05 22 30 36
30093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 23 30 36
30 30156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 26 30 34
30187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 27 30 34
30219 0.219 5.66 8.00 9.80 11.30 12.60 15.5 17.9 21.9 27 30 34
30250 0.250 7.07 10.0 12.2 14.1 15.8 19.4 22.4 27.4 25 30 33
40026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 26 40 52
40031 0.031 0.106 0.150 0.184 0.212 0.237 0.290 0.335 0.411 27 40 52
40
40036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 29 40 51
40043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 30 40 50


Equivalent
(degree) at Code
Orifice (inch) 20 40 60 80 100 150 200 300 20 40 80
40 psi
40052 0.052 0.283 0.400 0.490 0.566 0.632 0.775 0.894 1.10 30 40 50
40057 0.057 0.354 0.500 0.612 0.707 0.791 0.968 1.12 1.37 31 40 49
40062 0.062 0.424 0.600 0.735 0.849 0.949 1.16 1.34 1.64 31 40 49
40072 0.072 0.566 0.800 0.980 1.13 1.26 1.55 1.79 2.19 31 40 47
40078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 32 40 45
40093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 32 40 45
40 40109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 32 40 45
40141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 33 40 45
40156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 34 40 45
40172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.2 13.7 35 40 45
40187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 35 40 45
40203 0.203 4.95 7.00 8.57 9.90 11.1 13.6 15.7 19.2 35 40 45
40250 0.250 7.07 10.00 12.20 14.10 15.8 19.4 22.4 27.4 35 40 43
45040 0.040 0.177 0.250 0.306 0.354 0.395 0.484 0.559 0.685 35 45 55
45055 0.055 0.315 0.445 0.545 0.629 0.704 0.862 0.995 1.22 35 45 55
45070 0.070 0.530 0.750 0.919 1.06 1.19 1.45 1.68 2.05 36 45 53
45 45093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 37 45 51
45125 0.125 1.77 2.50 3.06 3.54 3.95 4.84 5.59 6.85 38 45 50
45156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 39 45 50
45187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 40 45 50
50026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 37 50 59
50036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 39 50 57
50043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 40 50 56
50052 0.052 0.283 0.400 0.490 0.566 0.632 0.775 0.894 1.10 42 50 56
50057 0.057 0.354 0.500 0.612 0.707 0.791 0.968 1.12 1.37 44 50 56
50062 0.062 0.424 0.600 0.735 0.849 0.949 1.16 1.34 1.64 45 50 56
50072 0.072 0.566 0.800 0.980 1.13 1.26 1.55 1.79 2.19 45 50 55
50 50078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 45 50 55
50093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 45 50 55
50109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 45 50 55
50141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 45 50 55
50156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 46 50 54
50172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.2 13.7 46 50 54
50187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 46 50 54
50203 0.203 4.95 7.00 8.57 9.90 11.1 13.6 15.7 19.2 46 50 54
60026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 47 60 69
60033 0.033 0.120 0.170 0.208 0.240 0.269 0.329 0.380 0.466 49 60 67
60040 0.040 0.177 0.250 0.306 0.354 0.395 0.484 0.559 0.685 50 60 66
60055 0.055 0.315 0.445 0.545 0.629 0.704 0.862 0.995 1.22 52 60 66
60
60070 0.070 0.530 0.750 0.919 1.06 1.19 1.45 1.68 2.05 54 60 65
60093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 55 60 65
60125 0.125 1.77 2.50 3.06 3.54 3.95 4.84 5.59 6.85 54 60 65
60156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 54 60 65


Fan/Orifice Equivalent
(degree) at
40 psi
65013 0.013 0.018 0.025 0.031 0.035 0.040 0.048 0.056 0.068 44 65 77
65015 0.015 0.023 0.033 0.040 0.047 0.052 0.064 0.074 0.090 47 65 90
65021 0.021 0.047 0.067 0.082 0.095 0.106 0.130 0.150 .183 50 65 75
65026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 51 65 74
65028 0.028 0.085 0.120 0.147 0.170 0.190 0.232 0.268 0.329 51 65 74
65031 0.031 0.106 0.150 0.184 0.212 0.237 0.290 0.335 0.411 51 65 74
65036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 52 65 73
65040 0.040 0.177 0.250 0.306 0.354 0.395 0.484 0.559 0.685 52 65 73
65043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 53 65 72
65052 0.052 0.283 0.400 0.490 0.566 0.632 0.775 0.894 1.10 53 65 72
65 65057 0.057 0.354 0.500 0.612 0.707 0.791 0.968 1.12 1.37 53 65 72
65062 0.062 0.424 0.600 0.735 0.849 0.949 1.16 1.34 1.64 54 65 72
65072 0.072 0.566 0.800 0.980 1.13 1.26 1.55 1.79 2.19 55 65 71
65078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 56 65 71
65093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 56 65 70
65109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 57 65 70
65141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 58 65 69
65156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 59 65 68
65172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.2 13.7 60 65 68
65187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 60 65 68
65203 0.203 4.95 7.00 8.57 9.90 11.1 13.6 15.7 19.2 60 65 68
73022 0.022 0.054 0.077 0.094 0.109 0.122 0.149 0.172 0.211 53 73 86
73032 0.032 0.109 0.154 0.189 0.218 0.243 0.298 0.344 0.422 55 73 84
73040 0.040 0.177 0.250 0.306 0.354 0.395 0.484 0.559 0.685 56 73 83
73
73045 0.045 0.218 0.308 0.377 0.436 0.487 0.596 0.689 0.843 58 73 82
73056 0.056 0.327 0.462 0.566 0.653 0.730 0.895 1.03 1.27 60 73 80
73072 0.072 0.566 0.800 0.980 1.13 1.26 1.55 1.79 2.19 64 73 74
80018 0.018 0.035 0.050 0.061 0.071 0.079 0.097 0.112 0.137 61 80 95
80021 0.021 0.047 0.067 0.082 0.095 0.106 0.130 0.150 0.183 67 80 94
80026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 68 80 89
80031 0.031 0.106 0.150 0.184 0.212 0.237 0.290 0.335 0.411 68 80 89
80036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 69 80 88
80043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 70 80 87
80052 0.052 0.283 0.400 0.490 0.566 0.632 0.775 0.894 1.10 71 80 86
80 80057 0.057 0.354 0.500 0.612 0.707 0.791 0.968 1.12 1.37 71 80 86
80062 0.062 0.424 0.600 0.735 0.849 0.949 1.16 1.34 1.64 72 80 85
80072 0.072 0.566 0.800 0.980 1.13 1.26 1.55 1.79 2.19 72 80 84
80078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 73 80 84
80093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 74 80 83
80109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 74 80 83
80141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 74 80 83
80156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 74 80 83


Equivalent
(degree) at Code
Orifice (inch) 20 40 60 80 100 150 200 300 20 40 80
40 psi
80172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.2 13.7 74 80 83
80 80187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 75 80 83
80203 0.203 4.95 7.00 8.57 9.90 11.1 13.6 15.7 19.2 75 80 83
90028 0.028 0.085 0.120 0.147 0.170 0.190 0.232 0.268 0.329 76 90 100
90033 0.033 0.120 0.170 0.208 0.240 0.269 0.329 0.380 0.466 77 90 100
90040 0.040 0.177 0.250 0.306 0.354 0.395 0.484 0.559 0.685 78 90 99
90043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 78 90 99
90
90055 0.055 0.315 0.445 0.545 0.629 0.704 0.862 0.995 1.22 79 90 97
90070 0.070 0.530 0.750 0.919 1.06 1.19 1.45 1.68 2.05 82 90 95
90093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 84 90 95
90125 0.125 1.77 2.50 3.06 3.54 3.95 4.84 5.59 6.85 85 90 95
95018 0.018 0.035 0.050 0.061 0.071 0.079 0.097 0.112 0.137 81 95 105
95026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 81 95 105
95031 0.031 0.106 0.150 0.184 0.212 0.237 0.290 0.335 0.411 82 95 105
95036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 82 95 105
95043 0.043 0.212 0.300 0.367 0.424 .4740 0.581 0.671 0.822 83 95 104
95052 0.052 0.283 0.400 0.490 0.566 0.632 0.775 0.894 1.10 84 95 103
95057 0.057 0.354 0.500 0.612 0.707 0.791 0.968 1.12 1.37 84 95 102
95062 0.062 0.424 0.600 0.735 0.849 0.949 1.16 1.34 1.64 86 95 101
95 95072 0.072 0.566 0.800 0.980 1.13 1.26 1.55 1.79 2.19 87 95 100
95078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 89 95 100
95093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 90 95 100
95109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 90 95 100
95141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 91 95 101
95156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 92 95 100
95172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.2 13.7 93 95 99
95187 0.187 4.24 6.00 7.35 8.49 9.49 11.6 13.4 16.4 93 95 99
95203 0.203 4.95 7.00 8.57 9.90 11.1 13.6 15.7 19.2 93 95 99
110022 0.022 0.054 0.077 0.094 0.109 0.122 0.149 0.172 0.211 94 110 121
110026 0.026 0.071 0.100 0.122 0.141 0.158 0.194 0.224 0.274 94 110 121
110031 0.031 0.106 0.150 0.184 0.212 0.237 0.290 0.335 0.411 97 110 110
110036 0.036 0.141 0.200 0.245 0.283 0.316 0.387 0.447 0.548 98 110 120
110043 0.043 0.212 0.300 0.367 0.424 0.474 0.581 0.671 0.822 99 110 120
110052 0.052 0.283 0.400 0.490 0.566 0.632 0.775 0.894 1.10 100 110 119
110
110055 0.055 0.315 0.445 0.545 0.629 0.704 0.862 0.995 1.22 100 110 118
110062 0.062 0.424 0.600 0.735 0.849 0.949 1.16 1.34 1.64 101 110 117
110070 0.070 0.530 0.750 0.919 1.06 1.19 1.45 1.68 2.05 102 110 117
110078 0.078 0.707 1.00 1.22 1.41 1.58 1.94 2.24 2.74 103 110 117
110093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 104 110 117
110109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 105 110 118


Fan Angle
Equivalent
(degree) at Code 100 200 300 400 500 1000 1500 2000 138 275 552
Orifice (mm)
275 kPa
1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00 1.38 2.75 5.52
15026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 10 15 24
15036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 10 15 24
15040 1.02 0.570 0.806 0.987 1.14 1.27 1.80 2.21 2.55 10 15 24
15043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 11 15 24
15052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 11 15 21
15055 1.40 1.01 1.43 1.76 2.03 2.27 3.21 3.93 4.54 11 15 21
15062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 11 15 21
15070 1.78 1.71 2.42 2.96 3.42 3.82 5.40 6.62 7.64 11 15 20
15
15078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 10 15 19
15093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 10 15 19
15109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 10 15 19
15141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 10 15 19
15156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 10 15 18
15172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 11 15 18
15187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 11 15 18
15203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 11 15 18
25026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 14 25 34
25036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 15 25 33
25043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 14 25 33
25052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 15 25 33
25057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 16 25 32
25062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 17 25 31
25072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 17 25 31
25 25078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 18 25 31
25093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 18 25 31
25109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 19 25 31
25141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 19 25 31
25156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 21 25 29
25172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 21 25 29
25187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 22 25 29
25203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 22 25 29
30055 1.40 1.01 1.43 1.76 2.03 2.27 3.21 3.93 4.54 21 30 37
30070 1.78 1.71 2.42 2.96 3.42 3.82 5.40 6.62 7.64 22 30 36
30093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 23 30 36
30 30156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 26 30 34
30187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 27 30 34
30219 5.56 18.2 25.8 31.6 36.5 40.8 57.7 70.6 81.5 27 30 34
30250 6.35 22.8 32.2 39.5 45.6 51.0 72.1 88.3 102 25 30 33
40026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 26 40 52
40 40031 0.787 0.342 0.483 0.592 0.684 0.764 1.08 1.32 1.53 27 40 52
40036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 29 40 51


Fan Angle
Equivalent
(degree) at Code 100 200 300 400 500 1000 1500 2000 138 275 552
Orifice (mm)
275 kPa
1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00 1.38 2.75 5.52
40043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 30 40 50
40052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 30 40 50
40057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 31 40 49
40062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 31 40 49
40072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 31 40 47
40078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 32 40 45
40093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 32 40 45
40
40109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 32 40 45
40141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 33 40 45
40156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 34 40 45
40172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 35 40 45
40187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 35 40 45
40203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 35 40 45
40250 6.35 22.8 32.2 39.5 45.6 51.0 64.9 79.4 91.7 35 40 43
45040 1.02 0.570 0.806 0.987 1.14 1.27 1.80 2.21 2.55 35 45 55
45055 1.40 1.01 1.43 1.76 2.03 2.27 3.21 3.93 4.54 35 45 55
45070 1.78 1.71 2.42 2.96 3.42 3.82 5.40 6.62 7.64 36 45 53
45 45093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 37 45 51
45125 3.18 5.70 8.06 9.87 11.4 12.7 18.0 22.1 25.5 38 45 50
45156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 39 45 50
45187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 40 45 50
50026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 37 50 59
50036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 39 50 57
50043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 40 50 56
50052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 42 50 56
50057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 44 50 56
50062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 45 50 56
50072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 45 50 55
50 50078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 45 50 55
50093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 45 50 55
50109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 45 50 55
50141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 45 50 55
50156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 46 50 54
50172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 46 50 54
50187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 46 50 54
50203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 46 50 54
60026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 47 60 69
60033 0.838 0.387 0.548 0.671 0.775 0.866 1.23 1.50 1.73 49 60 67
60040 1.02 0.570 0.806 0.987 1.14 1.27 1.80 2.21 2.55 50 60 66
60
60055 1.40 1.01 1.43 1.76 2.03 2.27 3.21 3.93 4.54 52 60 66
60070 1.78 1.71 2.42 2.96 3.42 3.82 5.40 6.62 7.64 54 60 65
60093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 55 60 65


Fan Angle
Equivalent
(degree) at Code 100 200 300 400 500 1000 1500 2000 138 275 552
Orifice (mm)
275 kPa
1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00 1.38 2.75 5.52
60125 3.18 5.70 8.06 9.87 11.4 12.7 18.0 22.1 25.5 54 60 65
60
60156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 54 60 65
65013 0.330 0.057 0.081 0.099 0.114 0.127 0.180 0.221 0.255 44 65 77
65015 0.381 0.075 0.106 0.130 0.150 0.168 0.238 0.291 0.336 47 65 76
65021 0.533 0.153 0.216 0.264 0.305 0.341 0.483 0.591 0.683 50 65 75
65026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 51 65 74
65028 0.711 0.273 0.387 0.474 0.547 0.611 0.865 1.06 1.22 51 65 74
65031 0.787 0.342 0.483 .0592 0.684 0.764 1.08 1.32 1.53 51 65 74
65036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 52 65 73
65040 1.02 0.570 0.806 0.987 1.14 1.27 1.80 2.21 2.55 52 65 73
65043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 53 65 72
65052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 53 65 72
65 65057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 53 65 72
65062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 54 65 72
65072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 55 65 71
65078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 56 65 71
65093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 56 65 70
65109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 57 65 70
65141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 58 65 69
65156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 59 65 68
65172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 60 65 68
65187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 60 65 68
65203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 60 65 68
73022 0.559 0.175 0.248 0.304 0.351 0.392 0.555 0.680 0.785 53 73 86
73032 0.813 0.351 0.496 0.608 0.702 0.785 1.11 1.36 1.57 55 73 84
73040 1.02 0.570 0.806 0.987 1.14 1.27 1.80 2.21 2.55 56 73 83
73
73045 1.14 0.702 0.993 1.22 1.40 1.57 2.22 2.72 3.14 58 73 82
73056 1.42 1.05 1.49 1.82 2.11 2.35 3.33 4.08 4.71 60 73 80
73072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 64 73 74
80018 0.457 0.114 0.161 0.197 0.228 0.255 0.360 0.441 0.510 61 80 95
80021 0.533 0.153 0.216 0.264 0.305 0.341 0.483 0.591 0.683 67 80 94
80026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 68 80 89
80031 0.787 0.342 0.483 0.592 0.684 0.764 1.08 1.32 1.53 68 80 89
80036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 69 80 88
80043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 70 80 87
80 80052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 71 80 86
80057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 71 80 86
80062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 72 80 85
80072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 72 80 84
80078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 73 80 84
80093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 74 80 83
80109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 74 80 83


Fan Angle
Equivalent
(degree) at Code 100 200 300 400 500 1000 1500 2000 138 275 552
Orifice (mm)
275 kPa
1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00 1.38 2.75 5.52
80141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 74 80 83
80156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 74 80 83
80 80172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 74 80 83
80187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 75 80 83
80203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 75 80 83
90028 0.711 0.273 0.387 0.474 0.547 0.611 0.865 1.06 1.22 76 90 100
90033 0.838 0.387 0.548 0.671 0.775 0.866 1.23 1.50 1.73 77 90 100
90040 1.02 0.570 0.806 0.987 1.14 1.27 1.80 2.21 2.55 78 90 99
90043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 78 90 99
90
90055 1.40 1.01 1.43 1.76 2.03 2.27 3.21 3.93 4.54 79 90 97
90070 1.78 1.71 2.42 2.96 3.42 3.82 5.40 6.62 7.64 82 90 95
90093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 84 90 95
90125 3.18 5.70 8.06 9.87 11.4 12.7 18.0 22.1 25.5 85 90 95
95018 0.457 0.114 0.161 0.197 0.228 0.255 0.360 0.441 0.510 81 95 105
95026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 81 95 105
95031 0.787 0.342 0.483 0.592 0.684 0.764 1.08 1.32 1.53 82 95 105
95036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 82 95 105
95043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 83 95 104
95052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 84 95 103
95057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 84 95 102
95062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 86 95 101
95 95072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 87 95 100
95078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 89 95 100
95093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 90 95 100
95109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 90 95 100
95141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 91 95 101
95156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 92 95 100
95172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 93 95 99
95187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 93 95 99
95203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 93 95 99
110022 0.559 0.175 0.248 0.304 0.351 0.392 0.555 0.680 0.785 94 110 121
110026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 94 110 121
110031 0.787 0.342 0.483 0.592 0.684 0.764 1.08 1.32 1.53 97 110 110
110036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 98 110 120
110043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 99 110 120
110052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 100 110 119
110
110055 1.40 1.01 1.43 1.76 2.03 2.27 3.21 3.93 4.54 100 110 118
110062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 101 110 117
110070 1.78 1.71 2.42 2.96 3.42 3.82 5.40 6.62 7.64 102 110 117
110078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 103 110 117
110093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 104 110 117
110109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 105 110 118

Flood Fan Nozzles
Series FF Flood Fan Nozzle
The FF series flood fan nozzle is available in two different Fan Nozzle
body lengths. This allows alternating shower nozzles
installed in a straight line on a pipe to spray parallel fan
patterns that do not interfere. The flow is deflected from
the centerline at an angle of 72° as shown on the drawing.
Construction
All FF series nozzles are constructed of 316SS and are
are typically used in systems that operate at 100 psig or
less.
Deflection
72°
A
X
0.625"
Fan Nozzle Ordering Information Nozzle Length Connection Size/Type Code

Code
A X 1/4” NPT 1/4
FF 4B H A 090040 1.25”* 0.725” L 1/8” NPT 1/8
Nozzle 1.25”* 0.850” H 1/4” BSPT 4B
Fan/Orifice
Series *Overall length A will be 1.35” for 1/8” BSPT 2B
Connection Length Number
orifice sizes 0.129 ” and larger. 9/16”-24 9U
Construction Contact Kadant Solutions for sizes
Construction Material Code
Material 3/8”, 1/2”, 3/4”.
ArresTech Plated 316SS** A
316SS S
**Available for orifice sizes 0.023”
and larger.


Fan Angle Equivalent Pressure (PSI) Fan Angle at psi*
(degree) at Code Orifice
40 psi (inch) 15 20 25 30 40 50 60 70 80 90 100 20 40 80
FF90014 0.014 0.031 0.035 0.040 0.043 0.050 0.056 0.061 0.066 0.071 0.075 0.079 74 90 90
FF90024 0.024 0.06 0.07 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 74 90 90
FF90028 0.028 0.09 0.11 0.12 0.13 0.15 0.17 0.18 0.20 0.21 0.23 0.24 74 90 90
FF90033 0.033 0.12 0.14 0.16 0.17 0.20 0.22 0.24 0.26 0.28 0.30 0.32 74 90 90
FF90040 0.040 0.18 0.21 0.24 0.26 0.30 0.34 0.37 0.40 0.42 0.45 0.47 74 90 90
FF90046 0.046 0.24 0.28 0.32 0.35 0.40 0.45 0.49 0.53 0.57 0.60 0.63 74 90 90
FF90052 0.052 0.31 0.35 0.40 0.43 0.50 0.56 0.61 0.66 0.71 0.75 0.79 74 90 90
FF90057 0.057 0.37 0.42 0.47 0.52 0.60 0.67 0.73 0.79 0.85 0.90 0.95 74 90 90
90 FF90065 0.065 0.49 0.57 0.63 0.69 0.80 0.89 0.98 1.06 1.13 1.20 1.26 74 90 90
FF90073 0.073 0.61 0.71 0.79 0.87 1.00 1.12 1.22 1.32 1.41 1.50 1.58 74 90 90
FF90093 0.093 0.92 1.06 1.19 1.30 1.50 1.68 1.84 1.98 2.12 2.25 2.37 74 90 90
FF90104 0.104 1.22 1.41 1.58 1.73 2.00 2.24 2.45 2.65 2.83 3.00 3.16 74 90 90
FF90116 0.116 1.47 1.70 1.90 2.08 2.40 2.68 2.94 3.17 3.39 3.60 3.79 74 90 90
FF90129 0.129 1.84 2.12 2.37 2.60 3.00 3.35 3.67 3.97 4.24 4.50 4.74 74 90 90
FF90141 0.141 2.20 2.55 2.85 3.12 3.60 4.02 4.41 4.76 5.09 5.40 5.69 74 90 90
FF90148 0.148 2.45 2.83 3.16 3.46 4.00 4.47 4.90 5.29 5.66 6.00 6.32 74 90 90
FF90156 0.156 2.69 3.11 3.48 3.81 4.40 4.92 5.39 5.82 6.22 6.60 6.96 74 90 90
FF120014 0.014 0.031 0.035 0.040 0.043 0.050 0.056 0.061 0.066 0.071 0.075 0.079 100 120 120
FF120024 0.024 0.06 0.07 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 100 120 120
FF120028 0.028 0.09 0.11 0.12 0.13 0.15 0.17 0.18 0.20 0.21 0.23 0.24 100 120 120
FF120033 0.033 0.12 0.14 0.16 0.17 0.20 0.22 0.24 0.26 0.28 0.30 0.32 100 120 120
FF120040 0.040 0.18 0.21 0.24 0.26 0.30 0.34 0.37 0.40 0.42 0.45 0.47 100 120 120
FF120046 0.046 0.24 0.28 0.32 0.35 0.40 0.45 0.49 0.53 0.57 0.60 0.63 100 120 120
FF120052 0.052 0.31 0.35 0.40 0.43 0.50 0.56 0.61 0.66 0.71 0.75 0.79 100 120 120
FF120057 0.057 0.37 0.42 0.47 0.52 0.60 0.67 0.73 0.79 0.85 0.90 0.95 100 120 120
FF120065 0.065 0.49 0.57 0.63 0.69 0.80 0.89 0.98 1.06 1.13 1.20 1.26 100 120 120
FF120073 0.073 0.61 0.71 0.79 0.87 1.00 1.12 1.22 1.32 1.41 1.50 1.58 100 120 120
FF120093 0.093 0.92 1.06 1.19 1.30 1.50 1.68 1.84 1.98 2.12 2.25 2.37 100 120 120
120
FF120104 0.104 1.22 1.41 1.58 1.73 2.00 2.24 2.45 2.65 2.83 3.00 3.16 100 120 120
FF120116 0.116 1.47 1.70 1.90 2.08 2.40 2.68 2.94 3.17 3.39 3.60 3.79 100 120 120
FF120129 0.129 1.84 2.12 2.37 2.60 3.00 3.35 3.67 3.97 4.24 4.50 4.74 100 120 120
FF120141 0.141 2.20 2.55 2.85 3.12 3.60 4.02 4.41 4.76 5.09 5.40 5.69 100 120 120
FF120148 0.148 2.45 2.83 3.16 3.46 4.00 4.47 4.90 5.29 5.66 6.00 6.32 100 120 120
FF120156 0.156 2.69 3.11 3.48 3.81 4.40 4.92 5.39 5.82 6.22 6.60 6.96 100 120 120
FF120161 0.161 2.94 3.39 3.79 4.16 4.80 5.37 5.88 6.35 6.79 7.20 7.59 100 120 120
FF120173 0.173 3.31 3.82 4.27 4.68 5.40 6.04 6.61 7.14 7.64 8.10 8.54 100 120 120
FF120180 0.180 3.67 4.24 4.74 5.20 6.00 6.71 7.35 7.94 8.49 9.00 9.49 100 120 120
FF120187 0.187 4.29 4.95 5.53 6.06 7.00 7.83 8.57 9.26 9.90 10.50 11.07 100 120 120
FF120219 0.219 4.90 5.66 6.32 6.93 8.00 8.94 9.80 10.58 11.31 12.00 12.65 100 120 120


Fan Pressure kPa (Bars) Fan Angle at kPa (Bars)*
Equivalent
Angle
Code Orifice 100 150 200 250 300 350 400 450 500 600 700 138 275 552
(degree) at
(mm)
275 kPa 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 6.00 7.00 1.38 2.75 5.52
FF90014 0.356 0.114 0.140 0.161 0.180 0.197 0.213 0.228 0.242 0.255 0.279 0.301 74 90 90
FF90024 0.61 0.23 0.28 0.32 0.36 0.39 0.43 0.46 0.48 0.51 0.56 0.60 74 90 90
FF90028 0.71 0.34 0.42 0.48 0.54 0.59 0.64 0.68 0.73 0.76 0.84 0.90 74 90 90
FF90033 0.84 0.46 0.56 0.64 0.72 0.79 0.85 0.91 0.97 1.02 1.12 1.21 74 90 90
FF90040 1.02 0.68 0.84 0.97 1.08 1.18 1.28 1.37 1.45 1.53 1.67 1.81 74 90 90
FF90046 1.17 0.91 1.12 1.29 1.44 1.58 1.71 1.82 1.93 2.04 2.23 2.41 74 90 90
FF90052 1.32 1.14 1.40 1.61 1.80 1.97 2.13 2.28 2.42 2.55 2.79 3.01 74 90 90
FF90057 1.45 1.37 1.67 1.93 2.16 2.37 2.56 2.73 2.90 3.06 3.35 3.62 74 90 90
90 FF90065 1.65 1.82 2.23 2.58 2.88 3.16 3.41 3.65 3.87 4.08 4.47 4.82 74 90 90
FF90073 1.85 2.28 2.79 3.22 3.60 3.95 4.26 4.56 4.83 5.10 5.58 6.03 74 90 90
FF90093 2.36 3.42 4.19 4.83 5.40 5.92 6.40 6.84 7.25 7.64 8.37 9.04 74 90 90
FF90104 2.64 4.56 5.58 6.45 7.21 7.89 8.53 9.12 9.67 10.19 11.16 12.06 74 90 90
FF90116 2.95 5.47 6.70 7.73 8.65 9.47 10.23 10.94 11.60 12.23 13.40 14.47 74 90 90
FF90129 3.28 6.84 8.37 9.67 10.81 11.84 12.79 13.67 14.50 15.29 16.75 18.09 74 90 90
FF90141 3.58 8.20 10.05 11.60 12.97 14.21 15.35 16.41 17.40 18.34 20.10 21.71 74 90 90
FF90148 3.76 9.12 11.16 12.89 14.41 15.79 17.05 18.23 19.34 20.38 22.33 24.12 74 90 90
FF90156 3.96 10.03 12.28 14.18 15.85 17.37 18.76 20.05 21.27 22.42 24.56 26.53 74 90 90
FF120014 0.014 0.031 0.035 0.040 0.043 0.050 0.056 0.061 0.066 0.071 0.075 0.079 100 120 120
FF120024 0.61 0.23 0.28 0.32 0.36 0.39 0.43 0.46 0.48 0.51 0.56 0.60 100 120 120
FF120028 0.71 0.34 0.42 0.48 0.54 0.59 0.64 0.68 0.73 0.76 0.84 0.90 100 120 120
FF120033 0.84 0.46 0.56 0.64 0.72 0.79 0.85 0.91 0.97 1.02 1.12 1.21 100 120 120
FF120040 1.02 0.68 0.84 0.97 1.08 1.18 1.28 1.37 1.45 1.53 1.67 1.81 100 120 120
FF120046 1.17 0.91 1.12 1.29 1.44 1.58 1.71 1.82 1.93 2.04 2.23 2.41 100 120 120
FF120052 1.32 1.14 1.40 1.61 1.80 1.97 2.13 2.28 2.42 2.55 2.79 3.01 100 120 120
FF120057 1.45 1.37 1.67 1.93 2.16 2.37 2.56 2.73 2.90 3.06 3.35 3.62 100 120 120
FF120065 1.65 1.82 2.23 2.58 2.88 3.16 3.41 3.65 3.87 4.08 4.47 4.82 100 120 120
FF120073 1.85 2.28 2.79 3.22 3.60 3.95 4.26 4.56 4.83 5.10 5.58 6.03 100 120 120
FF120093 2.36 3.42 4.19 4.83 5.40 5.92 6.40 6.84 7.25 7.64 8.37 9.04 100 120 120
120
FF120104 2.64 4.56 5.58 6.45 7.21 7.89 8.53 9.12 9.67 10.19 11.16 12.06 100 120 120
FF120116 2.95 5.47 6.70 7.73 8.65 9.47 10.23 10.94 11.60 12.23 13.40 14.47 100 120 120
FF120129 3.28 6.84 8.37 9.67 10.81 11.84 12.79 13.67 14.50 15.29 16.75 18.09 100 120 120
FF120141 3.58 8.20 10.05 11.60 12.97 14.21 15.35 16.41 17.40 18.34 20.10 21.71 100 120 120
FF120148 3.76 9.12 11.16 12.89 14.41 15.79 17.05 18.23 19.34 20.38 22.33 24.12 100 120 120
FF120156 3.96 10.03 12.28 14.18 15.85 17.37 18.76 20.05 21.27 22.42 24.56 26.53 100 120 120
FF120161 4.09 10.94 13.40 15.47 17.30 18.95 20.46 21.88 23.20 24.46 26.79 28.94 100 120 120
FF120173 4.39 12.31 15.07 17.40 19.46 21.31 23.02 24.61 26.10 27.52 30.14 32.56 100 120 120
FF120180 4.57 13.67 16.75 19.34 21.62 23.68 25.58 27.35 29.01 30.57 33.49 36.18 100 120 120
FF120187 4.75 15.95 19.54 22.56 25.22 27.63 29.84 31.90 33.84 35.67 39.07 42.21 100 120 120
FF120219 5.56 18.23 22.33 25.78 28.83 31.58 34.11 36.46 38.67 40.77 44.66 48.23 100 120 120

Flood Fan Insert
Nozzles
Series FH Flood Fan Insert Nozzle
The FH series flood fan insert nozzle is available in two Nut, Nozzle Retainer
different body lengths. This allows alternating shower 3/4”-27
nozzles installed in a straight line on a pipe to spray 2007B – 316SS
parallel fan patterns that do not interfere. The flow 2007BA – 316SS with ArresTech
is deflected from the center line at an angle of 75° as plating
shown. The FH nozzle insert can be used in place of a DF
or DJ series nozzle disc or the VH “V” Fan. The optional Hood Insert
extension tube is available for nozzles installed on the
bottom of a shower pipe (3 to 9 o’clock) to prevent debris
from being drawn from the bottom of the pipe and into
the nozzle, causing it to plug.
Extension Tube (left)
Construction A-19691 Extension Tube, Internal, 1.2”
All FH series nozzles are constructed of 316SS. The nozzles
are typically used in systems that operate at 100 psig Spacer (right)
or less. As an option, the nozzle retainer nut can be 2148 (nylon)
plated with ArresTech to prevent thread galling during 2148A (316SS)
installation.
Base Nozzle – 316SS
3/4”-27*
2006C
*Welded to shower — not normally
replaced.
Deflection
75°
0.58"
Hood Insert Ordering Information Nozzle Length

Code
A X
FH S H 120040 0.71”** 0.185” S
Nozzle
Fan/Orifice 0.71”** 0.310” H
Series
Length Number **Overall length A will be 0.81” for
orifice sizes 0.129 ” and larger.
Construction
Material Construction Material Code
316SS S


40 psi (inch) 15 20 25 30 40 50 60 70 80 90 100 20 40 80
FH120014 0.014 0.031 0.035 0.040 0.043 0.050 0.056 0.061 0.066 0.071 0.075 0.079 100 120 120
FH120024 0.024 0.06 0.07 0.08 0.09 0.10 0.11 0.12 0.13 0.14 0.15 0.16 100 120 120
FH120028 0.028 0.09 0.11 0.12 0.13 0.15 0.17 0.18 0.20 0.21 0.23 0.24 100 120 120
FH120033 0.033 0.12 0.14 0.16 0.17 0.20 0.22 0.24 0.26 0.28 0.30 0.32 100 120 120
FH120040 0.040 0.18 0.21 0.24 0.26 0.30 0.34 0.37 0.40 0.42 0.45 0.47 100 120 120
FH120046 0.046 0.24 0.28 0.32 0.35 0.40 0.45 0.49 0.53 0.57 0.60 0.63 100 120 120
FH120052 0.052 0.31 0.35 0.40 0.43 0.50 0.56 0.61 0.66 0.71 0.75 0.79 100 120 120
FH120057 0.057 0.37 0.42 0.47 0.52 0.60 0.67 0.73 0.79 0.85 0.90 0.95 100 120 120
FH120065 0.065 0.49 0.57 0.63 0.69 0.80 0.89 0.98 1.06 1.13 1.20 1.26 100 120 120
FH120073 0.073 0.61 0.71 0.79 0.87 1.00 1.12 1.22 1.32 1.41 1.50 1.58 100 120 120
FH120093 0.093 0.92 1.06 1.19 1.30 1.50 1.68 1.84 1.98 2.12 2.25 2.37 100 120 120
120
FH120104 0.104 1.22 1.41 1.58 1.73 2.00 2.24 2.45 2.65 2.83 3.00 3.16 100 120 120
FH120116 0.116 1.47 1.70 1.90 2.08 2.40 2.68 2.94 3.17 3.39 3.60 3.79 100 120 120
FH120129 0.129 1.84 2.12 2.37 2.60 3.00 3.35 3.67 3.97 4.24 4.50 4.74 100 120 120
FH120141 0.141 2.20 2.55 2.85 3.12 3.60 4.02 4.41 4.76 5.09 5.40 5.69 100 120 120
FH120148 0.148 2.45 2.83 3.16 3.46 4.00 4.47 4.90 5.29 5.66 6.00 6.32 100 120 120
FH120156 0.156 2.69 3.11 3.48 3.81 4.40 4.92 5.39 5.82 6.22 6.60 6.96 100 120 120
FH120161 0.161 2.94 3.39 3.79 4.16 4.80 5.37 5.88 6.35 6.79 7.20 7.59 100 120 120
FH120173 0.173 3.31 3.82 4.27 4.68 5.40 6.04 6.61 7.14 7.64 8.10 8.54 100 120 120
FH120180 0.180 3.67 4.24 4.74 5.20 6.00 6.71 7.35 7.94 8.49 9.00 9.49 100 120 120
FH120187 0.187 4.29 4.95 5.53 6.06 7.00 7.83 8.57 9.26 9.90 10.50 11.07 100 120 120
FH120219 0.219 4.90 5.66 6.32 6.93 8.00 8.94 9.80 10.58 11.31 12.00 12.65 100 120 120


Fan Pressure kPa (Bars) Fan Angle at kPa (Bars)*
Equivalent
Angle
Code Orifice 100 150 200 250 300 350 400 450 500 600 700 138 275 552
(degree) at
(mm)
275 kPa 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 6.00 7.00 1.38 2.75 5.52
FH120014 0.36 0.031 0.035 0.040 0.043 0.050 0.056 0.061 0.066 0.071 0.075 0.079 100 120 120
FH120024 0.61 0.23 0.28 0.32 0.36 0.39 0.43 0.46 0.48 0.51 0.56 0.60 100 120 120
FH120028 0.71 0.34 0.42 0.48 0.54 0.59 0.64 0.68 0.73 0.76 0.84 0.90 100 120 120
FH120033 0.84 0.46 0.56 0.64 0.72 0.79 0.85 0.91 0.97 1.02 1.12 1.21 100 120 120
FH120040 1.02 0.68 0.84 0.97 1.08 1.18 1.28 1.37 1.45 1.53 1.67 1.81 100 120 120
FH120046 1.17 0.91 1.12 1.29 1.44 1.58 1.71 1.82 1.93 2.04 2.23 2.41 100 120 120
FH120052 1.32 1.14 1.40 1.61 1.80 1.97 2.13 2.28 2.42 2.55 2.79 3.01 100 120 120
FH120057 1.45 1.37 1.67 1.93 2.16 2.37 2.56 2.73 2.90 3.06 3.35 3.62 100 120 120
FH120065 1.65 1.82 2.23 2.58 2.88 3.16 3.41 3.65 3.87 4.08 4.47 4.82 100 120 120
FH120073 1.85 2.28 2.79 3.22 3.60 3.95 4.26 4.56 4.83 5.10 5.58 6.03 100 120 120
FH120093 2.36 3.42 4.19 4.83 5.40 5.92 6.40 6.84 7.25 7.64 8.37 9.04 100 120 120
120
FH120104 2.64 4.56 5.58 6.45 7.21 7.89 8.53 9.12 9.67 10.19 11.16 12.06 100 120 120
FH120116 2.95 5.47 6.70 7.73 8.65 9.47 10.23 10.94 11.60 12.23 13.40 14.47 100 120 120
FH120129 3.28 6.84 8.37 9.67 10.81 11.84 12.79 13.67 14.50 15.29 16.75 18.09 100 120 120
FH120141 3.58 8.20 10.05 11.60 12.97 14.21 15.35 16.41 17.40 18.34 20.10 21.71 100 120 120
FH120148 3.76 9.12 11.16 12.89 14.41 15.79 17.05 18.23 19.34 20.38 22.33 24.12 100 120 120
FH120156 3.96 10.03 12.28 14.18 15.85 17.37 18.76 20.05 21.27 22.42 24.56 26.53 100 120 120
FH120161 4.09 10.94 13.40 15.47 17.30 18.95 20.46 21.88 23.20 24.46 26.79 28.94 100 120 120
FH120173 4.39 12.31 15.07 17.40 19.46 21.31 23.02 24.61 26.10 27.52 30.14 32.56 100 120 120
FH120180 4.57 13.67 16.75 19.34 21.62 23.68 25.58 27.35 29.01 30.57 33.49 36.18 100 120 120
FH120187 4.75 15.95 19.54 22.56 25.22 27.63 29.84 31.90 33.84 35.67 39.07 42.21 100 120 120
FH120219 5.56 18.23 22.33 25.78 28.83 31.58 34.11 36.46 38.67 40.77 44.66 48.23 100 120 120

Flat Fan Nozzles
Series FL Flat Fan Nozzle
The FL series flat fan nozzle delivers a flat pattern, Flat Fan Nozzle
concentrating the energy on the surface being sprayed
for maximum cleaning efficiency. The flow is deflected
away from the nozzle centerline by the angle shown.
Construction
All FL series nozzles are constructed of 316SS. The
nozzles are typically used in systems that operate at
150 psig or less.
Deflection
B°
Flat Fan Nozzle Ordering Information Construction Material Code Connection Size/Type Code
316SS S 1/4” NPT 1/4
FL 1/4 S 040125 3/8” NPT 3/8
Nozzle 1/2” NPT 1/2
Series Fan/Orifice
Number 1/4” BSPT 1/4B
3/8” BSPT 3/8B
Connection Construction 1/2” BSPT 1/2B
Material Contact Kadant Solutions for size
3/4”.


Available Thread
Flow (GPM) Fan Angle at psi*
Fan Sizes (B)
Equivalent
Angle Nozzle 1/4” 3/8” 1/2” Length Deflection
Orifice Pressure (PSI)
(degree) Code NPT NPT NPT (A) Angle
(inch) 15 40 100
at 40 psi (Deg)
Hex Size C (inches) 15 20 30 40 60 80 100 150
F15078 0.625 1.88 22 0.078 0.71 0.87 1.0 1.2 1.4 1.6 1.9 15 23
F15187 1.0 2.65 32.2 0.187 4.3 4.9 6.1 7.0 8.6 9.9 11.1 13.6 10 15 19
15 F15203 1.0 2.65 32.2 0.203 4.9 5.7 6.9 8.0 9.8 11.3 12.6 15.5 11 15 18
F15219 1.0 2.65 32.2 0.219 5.5 6.4 7.8 9.0 11.0 12.7 14.2 17.4 11 15 18
F15234 1.0 2.65 32.2 0.234 6.1 7.1 8.7 10.0 12.2 14.2 15.8 19.4 11 15 18
25 F25141 0.750 2.56 25 0.141 2.5 2.8 3.5 4.0 4.9 5.7 6.3 7.7 15 25 34
F35078 0.625 1.44 36 0.078 0.61 0.7 0.9 1.0 1.2 1.4 1.6 1.9 18 35 39
F35109 0.750 1.66 30 0.109 1.2 1.4 1.7 2.0 2.4 2.8 3.2 3.9 24 35 40
F35125 1.0 2.50 32.2 0.125 1.8 2.1 2.6 3 3.7 4.2 4.7 5.8 26 35 41
F35141 1.0 2.50 32.2 0.141 2.5 2.8 3.5 4.0 4.9 5.7 6.3 7.7 28 35 38
F35156 1.0 2.50 32.2 0.156 3.1 3.5 4.3 5.0 6.1 7.1 8.0 9.7 31 35 38
35
F35172 1.0 2.65 32.2 0.172 3.7 4.2 5.2 6.0 7.3 8.5 9.5 11.6 29 35 39
F35187 1.0 2.65 32.2 0.187 4.3 4.9 6.1 7.0 8.6 9.9 11.1 13.6 27 35 40
F35203 1.0 2.65 32.2 0.203 4.9 5.7 6.9 8.0 9.8 11.3 12.6 15.5 26 35 40
F35219 1.0 2.65 32.2 0.219 5.5 6.4 7.8 9.0 11.0 12.7 14.2 17.4 11 15 18
F35234 1.0 2.65 32.2 0.234 6.1 7.1 8.7 10.0 12.2 14.2 15.8 19.4 11 15 18
F40125 1.0 2.50 32.2 0.125 1.8 2.1 2.6 3 3.7 4.2 4.7 5.8 24 40 43
F40141 1.0 2.50 32.2 0.141 2.5 2.8 3.5 4.0 4.9 5.7 6.3 7.7 24 40 43
40
F40156 1.0 2.50 32.2 0.156 3.1 3.5 4.3 5.0 6.1 7.1 8.0 9.7 24 40 43
F40297 1.0 2.65 32.2 0.297 9.8 11.3 13.9 16.0 19.6 23.0 25.0 31.0 24 40 43
F50078 0.625 2.50 50.5 0.078 0.6 0.71 0.87 1.0 1.2 1.4 1.6 1.9 34 50 50
F50109 0.625 2.50 50.5 0.109 1.5 1.8 2.2 2.5 3.1 3.5 3.9 4.8 42 50 50
F50109 1.0 2.50 32.2 0.109 1.5 1.8 2.2 2.5 3.1 3.5 3.9 4.8 42 50 50
F50141 0.625 2.50 50.5 0.141 2.5 2.8 3.5 4.0 4.9 5.7 6.3 7.7 39 50 50
F50141 1.0 2.50 32.2 0.141 2.5 2.8 3.5 4.0 4.9 5.7 6.3 7.7 39 50 50
50
F50187 1.0 2.50 32.2 0.187 3.7 4.2 5.2 6.0 7.3 8.5 9.5 11.6 42 50 50
F50234 1.0 2.50 32.2 0.234 6.1 7.1 8.7 10.0 12.2 14.2 15.8 19.4 42 50 50
F50266 1.0 2.50 32.2 0.266 7.6 8.8 10.8 12.5 15.3 17.7 19.7 24.0 38 50 50
F50297 1.0 2.50 32.2 0.297 9.8 11.3 13.9 16.0 19.6 23.0 25.0 31.0 44 50 50
F50328 1.0 2.50 32.2 0.328 12.2 14.2 17.0 20.0 24.0 28.0 32.0 39.0 46 50 50


Available Thread
Flow (LPM)
Fan Sizes Fan Angle at kPa
Angle (B) (Bar)*
1/4” 3/8” 1/2” Equivalent
(degree) Nozzle Length Deflection Pressure kPa (Bar)
NPT NPT NPT Orifice
at Code (A) Angle
(mm)
275 kPa (Deg) 100 150 200 300 400 500 700 1000 100 275 700
(2.75 Bar) Hex Size C (inches)
1.00 1.50 2.00 3.00 4.00 5.00 7.00 10.00 1.00 2.75 7.00
F15078 0.625 1.88 22 1.98 2.80 3.24 3.95 4.5 5.0 6.1 7.1 10.6 10 15 23
F15187 1.0 2.65 32.2 4.75 19.3 22.7 27.6 32.0 35.7 42.34 50.6 73.2 10 15 19
15 F15203 1.0 2.65 32.2 5.16 22.5 25.7 31.6 36.5 40.7 48.1 57.7 85.2 11 15 18
F15219 1.0 2.65 32.2 5.56 25.3 29.0 35.5 40.9 45.8 54.2 64.8 95.6 11 15 18
F15234 1.0 2.65 32.2 5.94 28.0 32.4 39.5 45.4 51.2 60.3 72.2 106.1 11 15 18
25 F25141 0.75 2.56 25 3.58 11.1 13.0 15.8 18.2 20.5 24.0 28.7 41.8 15 25 34
F35078 0.625 1.44 36 1.98 2.80 3.2 3.9 4.5 5.0 6.1 7.1 10.6 18 35 39
F35109 0.75 1.66 30 2.77 5.5 6.3 7.9 8.9 10.1 12.2 14.5 20.9 24 35 40
F35125 1.0 2.50 32.2 3.18 8.3 9.8 11.8 13.77 15.1 17.9 21.6 31.4 26 35 41
F35141 1.0 2.50 32.2 3.58 11.1 13.0 15.8 18.2 20.5 24.0 28.7 41.8 28 35 38
F35156 1.0 2.50 32.2 3.96 13.8 16.0 19.7 22.7 25.6 30.5 36.1 52.3 31 35 38
35
F35172 1.0 2.65 32.2 4.37 16.6 19.4 23.7 27.2 30.6 36.2 43.2 62.8 29 35 39
F35187 1.0 2.65 32.2 4.75 19.3 22.7 27.6 32.0 35.7 42.3 50.6 73.2 27 35 40
F35203 1.0 2.65 32.2 5.16 22.5 25.7 31.6 36.5 40.7 48.1 57.7 85.2 26 35 40
F35219 1.0 2.65 32.2 5.56 25.3 29.0 35.5 40.9 45.8 54.2 64.8 95.6 11 15 18
F35234 1.0 2.65 32.2 5.94 28.0 32.4 39.5 45.4 51.2 60.3 72.2 106.1 11 15 18
F40125 1.0 2.50 32.2 3.18 8.3 9.8 11.8 13.77 15.1 17.9 21.6 31.4 24 40 43
F40141 1.0 2.50 32.2 3.58 11.1 13.0 15.8 18.2 20.5 24.0 28.7 41.8 24 40 43
40
F40156 1.0 2.50 32.2 3.96 13.8 16.0 19.7 22.7 25.6 30.5 36.1 52.3 24 40 43
F40297 1.0 2.65 32.2 7.54 44.6 51.7 63.2 73.0 82.9 95.4 115.4 168.9 24 40 43
F50078 0.625 2.50 50.5 1.98 2.8 3.24 3.95 4.5 5.0 6.1 7.1 10.6 34 50 50
F50109 0.625 2.50 50.5 2.77 7.1 8.2 9.9 11.5 12.6 14.9 17.9 26.9 42 50 50
F50109 1.0 2.50 32.2 2.77 7.1 8.2 9.9 11.5 12.6 14.9 17.9 26.9 42 50 50
F50141 0.625 2.50 50.5 3.58 11.1 13.0 15.8 18.2 20.5 24.0 28.7 41.8 39 50 50
F50141 1.0 2.50 32.2 3.58 11.1 13.0 15.8 18.2 20.5 24.0 28.7 41.8 39 50 50
50
F50187 1.0 2.50 32.2 4.75 16.6 19.4 23.7 27.2 30.6 36.2 43.2 62.8 42 50 50
F50234 1.0 2.50 32.2 5.94 28.0 32.4 39.5 45.4 51.2 60.3 72.2 106.1 42 50 50
F50266 1.0 2.50 32.2 6.76 34.7 40.2 49.4 57.0 63.8 75.1 89.3 131.5 38 50 50
F50297 1.0 2.50 32.2 7.54 44.6 51.7 63.2 73.0 82.9 95.4 115.4 168.9 44 50 50
F50328 1.0 2.50 32.2 8.33 56.1 63.3 79.0 89.3 100.9 122.1 145.2 212.2 46 50 50

Brush Shower Fan/Jet
Nozzles
BT BT
BT
BF BZ
Products
u Series BF Brush Shower Fan Nozzle................................................................... 44
u Series BT Brush Shower Jet Nozzle.................................................................... 49
u Series BZ Brush Shower Fan Nozzle................................................................... 51
Go to Main TOC 43
Brush Shower Fan
Nozzles
Series BF Brush Shower Fan Nozzle
The BF series brush shower fan nozzle is designed to
deliver liquid in a range of fan patterns from 15° – 70°. Retaining Nut, Nozzle – 1.375” – 12
It’s a self aligning disc that can be installed in all Kadant C-25901
brush showers.
Disc, Nozzle Dome
Construction *Blank nozzle is C14239 to disable flow.
All BF series nozzles are constructed of 316SS. They
Gasket
are available for application pressures of less than 40 psi.
C14217
Nozzle discs are available with ArresTech plating as an
option.
Base, Nozzle Casting – 1.375” – 12 *
C25902-GP1 for use with Sch 10 pipe
C25902-GP2 for use with Sch 40 pipe
*Welded to shower — not normally replaced.
5°
1.18" Dia.
0.24"
1.05"
Brush Shower Fan Nozzle Ordering Information Construction Material Code Application Pressure Code
ArresTech Plated 316SS A 40 psig and less L
BF S L 015040 316SS S 41 to 1000 psig H
Nozzle
Series Fan/Orifice
Number
Construction Application
Material Pressure
44 Go to Brush Shower Fan/Jet Nozzles Tab


Fan Angle Low-Pressure (*2) High-Pressure (*2)
Nozzle Pressure (PSI)
(degree) Nozzle Spray Angle at Spray Angle at
Orifice
at 30 psi Number
(inch)
(*2) 20 40 60 80 100 200 400 600 800 1000 20 30 40 50 80 100
015040 0.040 0.16 0.23 0.28 0.32 0.36 0.51 0.72 0.88 1.01 1.13 13 15 16 13 15 16
015055 0.055 0.29 0.40 0.49 0.57 0.64 0.90 1.27 1.56 1.80 2.02 13 15 16 13 15 16
015070 0.070 0.49 0.70 0.85 0.99 1.10 1.56 2.21 2.70 3.12 3.49 13 15 16 13 15 16
15
015093 0.093 0.85 1.20 1.47 1.70 1.90 2.68 3.79 4.65 5.37 6.00 13 15 16 13 15 17
015109 0.109 1.01 1.43 1.73 2.00 2.24 3.16 4.47 5.48 6.32 7.07 14 15 16 13 15 17
015125 0.125 1.41 1.99 2.44 2.82 3.15 4.46 6.31 7.72 8.92 9.97 14 15 17 13 15 18
030040 0.040 0.17 0.23 0.29 0.33 0.37 0.52 0.74 0.90 1.04 1.17 25 30 32 25 30 32
030055 0.055 0.28 0.39 0.48 0.55 0.61 0.87 1.23 1.51 1.74 1.94 25 30 32 25 30 32
030063 0.063 0.40 0.57 0.70 0.80 0.90 1.27 1.80 2.20 2.55 2.85 25 30 32 25 30 32
030070 0.070 0.49 0.69 0.85 0.98 1.10 1.55 2.19 2.68 3.10 3.46 25 30 32 25 30 32
030079 0.079 0.69 0.98 1.20 1.38 1.54 2.18 3.09 3.78 4.36 4.88 25 30 32 25 30 32
030094 0.094 0.85 1.20 1.47 1.70 1.90 2.69 3.80 4.66 5.38 6.01 25 30 32 25 30 32
030110 0.110 1.25 1.77 2.17 2.50 2.80 3.95 5.59 6.85 7.91 8.84 25 30 32 25 30 32
030125 0.125 1.41 1.99 2.44 2.82 3.15 4.46 6.31 7.72 8.92 9.97 25 30 32 25 30 32
030144 0.144 2.09 2.96 3.62 4.18 4.67 6.61 9.35 11.45 13.22 14.78 25 30 32 25 30 32
30
030156 0.156 2.31 3.27 4.00 4.62 5.17 7.30 10.33 12.65 14.61 16.33 25 30 32 25 30 32
030171 0.171 2.53 3.57 4.37 5.05 5.65 7.98 11.29 13.83 15.97 17.85 25 30 33 25 30 33
030188 0.188 3.35 4.74 5.80 6.70 7.49 10.59 14.98 18.35 21.19 23.69 26 30 33 26 30 33
030203 0.203 4.14 5.85 7.17 8.28 9.26 13.09 18.51 22.68 26.18 29.27 26 30 33 26 30 33
030218 0.218 5.05 7.14 8.75 10.10 11.29 15.97 22.58 27.66 31.94 35.71 26 30 33 26 30 33
030250 0.250 6.78 9.58 11.74 13.55 15.15 21.43 30.31 37.12 42.86 47.92 26 30 33 26 30 33
030281 0.281 7.78 11.00 13.47 15.56 17.39 24.60 34.79 42.61 49.20 55.01 26 30 33 26 30 33
030296 0.296 8.65 12.23 14.98 17.30 19.34 27.35 38.68 47.38 54.71 61.16 26 30 33 26 30 33
030315 0.315 7.64 10.80 13.23 15.27 17.08 24.15 34.15 41.83 48.30 54.00 26 30 33 26 30 33
040111 0.111 1.21 1.70 2.09 2.41 2.69 3.81 5.39 6.60 7.62 8.52 35 40 48 35 40 48
40
040125 0.125 1.41 1.99 2.44 2.82 3.15 4.46 6.31 7.72 8.92 9.97 35 40 48 35 40 48
045033 0.033 0.14 0.20 0.24 0.28 0.31 0.44 0.63 0.77 0.89 0.99 39 45 47 39 45 47
045036 0.036 0.17 0.23 0.29 0.33 0.37 0.52 0.74 0.90 1.04 1.17 39 45 47 39 45 47
045040 0.040 0.20 0.28 0.35 0.40 0.45 0.63 0.89 1.10 1.26 1.41 39 45 47 39 45 47
45
045050 0.050 0.28 0.40 0.50 0.58 0.65 0.92 1.30 1.59 1.83 2.05 39 45 47 39 45 47
045055 0.055 0.38 0.54 0.66 0.76 0.85 1.20 1.70 2.08 2.40 2.69 39 45 47 39 45 47
045070 0.070 0.53 0.74 0.91 1.05 1.17 1.66 2.35 2.88 3.32 3.71 39 45 47 39 45 47
Go to Brush Shower Fan/Jet Nozzles Tab 45


Fan Angle Low-Pressure (*2) High-Pressure (*2)
Nozzle Pressure (PSI)
Orifice
at 30 psi Number
(inch)
(*2) 20 40 60 80 100 200 400 600 800 1000 20 30 40 50 80 100
045094 0.094 0.86 1.22 1.49 1.72 1.92 2.72 3.85 4.71 5.44 6.08 39 45 47 39 45 47
045110 0.110 1.23 1.73 2.12 2.45 2.74 3.87 5.48 6.71 7.75 8.66 39 45 47 39 45 47
045125 0.125 1.62 2.29 2.81 3.24 3.62 5.12 7.24 8.87 10.25 11.46 40 45 48 40 45 48
045144 0.144 2.13 3.01 3.68 4.25 4.75 6.72 9.50 11.64 13.44 15.03 40 45 48 40 45 48
45 045156 0.156 2.25 3.18 3.90 4.50 5.03 7.12 10.06 12.32 14.23 15.91 40 45 48 40 45 48
045171 0.171 2.84 4.02 4.92 5.68 6.35 8.98 12.70 15.56 17.96 20.08 40 45 48 40 45 48
045188 0.188 3.47 4.91 6.01 6.94 7.76 10.97 15.52 19.01 21.95 24.54 40 45 48 40 45 48
045250 0.250 6.22 8.80 10.77 12.44 13.91 19.67 27.82 34.07 39.34 43.98 41 45 48 41 45 48
045288 0.288 8.17 11.55 14.14 16.33 18.26 25.82 36.51 44.72 51.64 57.74 41 45 48 41 45 48
57 057250 0.250 6.80 9.62 11.78 13.60 15.21 21.50 30.41 37.25 43.01 48.08 53 57 60 53 57 60
060028 0.028 0.07 0.10 0.12 0.14 0.16 0.22 0.32 0.39 0.45 0.50 50 60 62 50 60 62
060031 0.031 0.11 0.15 0.18 0.21 0.24 0.34 0.47 0.58 0.67 0.75 50 60 62 50 60 62
060040 0.040 0.17 0.24 0.29 0.34 0.38 0.53 0.75 0.92 1.07 1.19 50 60 62 50 60 62
060050 0.050 0.25 0.35 0.43 0.49 0.55 0.78 1.11 1.35 1.56 1.75 50 60 62 50 60 62
060055 0.055 0.33 0.46 0.57 0.66 0.73 1.04 1.47 1.80 2.07 2.32 50 60 62 50 60 62
060060 0.060 0.39 0.55 0.68 0.78 0.87 1.23 1.74 2.14 2.47 2.76 50 60 62 50 60 62
060062 0.062 0.50 0.71 0.87 1.00 1.12 1.58 2.24 2.74 3.17 3.54 50 60 62 52 60 62
060070 0.070 0.65 0.92 1.13 1.30 1.46 2.06 2.92 3.57 4.13 4.61 50 60 62 54 60 62
60 060079 0.079 0.71 1.00 1.22 1.41 1.58 2.23 3.15 3.86 4.46 4.99 50 60 62 54 60 62
060086 0.086 0.77 1.09 1.33 1.54 1.72 2.43 3.44 4.22 4.87 5.44 50 60 62 54 60 63
060094 0.094 0.90 1.27 1.55 1.79 2.00 2.83 4.00 4.90 5.66 6.33 50 60 63 56 60 63
060109 0.109 1.07 1.51 1.84 2.13 2.38 3.37 4.76 5.83 6.74 7.53 51 60 63 56 60 63
060118 0.118 1.40 1.98 2.42 2.80 3.13 4.43 6.26 7.67 8.85 9.90 52 60 63 56 60 63
060125 0.125 1.53 2.16 2.64 3.05 3.41 4.82 6.82 8.35 9.64 10.78 53 60 63 56 60 63
060141 0.141 1.88 2.66 3.26 3.76 4.20 5.95 8.41 10.30 11.89 13.29 55 60 63 56 60 64
060156 0.156 2.23 3.15 3.85 4.45 4.98 7.04 9.95 12.19 14.07 15.73 56 60 63 58 60 64
060188 0.188 3.39 4.80 5.88 6.79 7.59 10.73 15.18 18.59 21.47 24.00 57 60 63 58 60 65
070033 0.033 0.18 0.25 0.31 0.35 0.40 0.56 0.79 0.97 1.12 1.25 60 – – 60 – –
70
070070 0.070 0.44 0.62 0.75 0.87 0.97 1.38 1.95 2.38 2.75 3.08 60 – – 60 – –
075040 0.040 0.17 0.24 0.30 0.35 0.39 0.55 0.77 0.94 1.09 1.22 64 64
075055 0.055 0.27 0.38 0.46 0.53 0.60 0.84 1.19 1.46 1.69 1.88 64 64
75 (*3) – (*3 ) –
075075 0.075 0.39 0.56 0.68 0.79 0.88 1.25 1.76 2.16 2.50 2.79 65 65
075078 0.078 0.57 0.80 0.98 1.13 1.26 1.79 2.53 3.09 3.57 4.00 65 65
*1 Reference numbers only. Angle may change depending on the operational conditions such as water temperature, chemicals, viscosity, or build-up
contaminations.
*2 High-pressure nozzles are tested at 80 psi and low-pressure nozzles are tested at 30 psi for the nominal angle.
*3 Maximum angle allowed on BF nozzle assembly is 65 degrees. Nominal angles higher than 65 degrees are meant to operate at lower pressures and
reach maximum angle.


Low-Pressure High-Pressure
Fan Angle Pressure kPa (Bars) (< 275 kPa) (*2) (> 275 kPa) (*2)
Nozzle
at 207 kpa Orifice
Number 100 200 300 400 500 750 1000 2000 4000 7000 138 275 552 345 552 689
(2.07 Bar) (mm)
(*2)
1.00 2.00 3.00 4.00 5.00 7.50 10.00 20.00 40.00 70.00 1.38 2.75 5.52 3.45 5.52 6.89
015040 1.02 0.52 0.73 0.89 1.03 1.15 1.41 1.63 2.31 3.26 4.31 – – – – – –
015055 1.40 0.92 1.30 1.59 1.84 2.05 2.52 2.90 4.11 5.81 7.69 13 15 16 13 15 16
015070 1.78 1.59 2.25 2.75 3.18 3.56 4.35 5.03 7.11 10.06 13.30 13 15 16 13 15 16
15
015093 2.36 2.74 3.87 4.74 5.47 6.12 7.49 8.65 12.23 17.30 22.88 13 15 16 13 15 16
015109 2.77 3.26 4.61 5.58 6.45 7.21 8.83 10.19 14.41 20.38 26.96 13 15 16 13 15 17
015125 3.18 5.02 7.09 8.69 10.03 11.21 15.86 22.43 27.47 31.72 35.46 14 15 16 13 15 17
030040 1.02 0.53 0.75 0.92 1.06 1.19 1.46 1.68 2.38 3.36 4.45 14 15 17 13 15 18
030055 1.40 0.89 1.25 1.54 1.77 1.98 2.43 2.80 3.96 5.61 7.42 25 30 32 25 30 32
030063 1.60 1.30 1.83 2.25 2.59 2.90 3.55 4.10 5.80 8.21 10.85 25 30 32 25 30 32
030070 1.78 1.58 2.23 2.74 3.16 3.53 4.33 4.99 7.06 9.99 13.21 25 30 32 25 30 32
030079 2.01 2.61 3.69 4.52 5.22 5.84 8.26 11.68 14.30 16.52 18.47 25 30 32 25 30 32
030094 2.39 2.74 3.87 4.75 5.48 6.13 7.50 8.66 12.25 17.33 22.92 25 30 32 25 30 32
030110 2.79 4.03 5.70 6.98 8.06 9.01 11.03 12.74 18.02 25.48 33.71 25 30 32 25 30 32
030125 3.18 4.54 6.43 7.87 9.09 10.16 12.45 14.37 20.32 28.74 38.02 25 30 32 25 30 32
30 030144 3.66 6.74 9.53 11.67 13.47 15.06 18.45 21.30 30.12 42.60 56.35 25 30 32 25 30 32
030156 3.96 7.45 10.53 12.90 14.89 16.65 20.39 23.55 33.30 47.09 62.30 25 30 32 25 30 32
030171 4.34 8.14 11.51 14.10 16.28 18.20 22.29 25.74 36.40 51.47 68.09 25 30 32 25 30 32
030188 4.78 10.80 15.27 18.70 21.60 24.14 29.57 34.15 48.29 68.29 90.34 25 30 33 25 30 33
030203 5.16 13.34 18.87 23.11 26.68 29.83 36.54 42.19 59.67 84.38 111.63 26 30 33 26 30 33
030218 5.54 16.28 23.02 28.19 32.55 36.40 44.58 51.47 72.79 102.95 136.19 26 30 33 26 30 33
030250 6.35 21.84 30.89 37.83 43.69 48.84 59.82 69.08 97.69 138.15 182.76 26 30 33 26 30 33
030281 7.14 25.07 35.46 43.43 50.15 56.07 68.67 79.29 112.14 158.58 209.79 26 30 33 26 30 33
030296 7.52 32.74 46.30 56.71 65.48 73.21 103.53 146.42 179.33 207.07 231.51 26 30 33 26 30 33
040111 2.82 3.88 5.49 6.73 7.77 8.68 10.64 12.28 17.37 24.56 32.50 26 30 33 26 30 33
40
040315 8.00 28.94 40.92 50.12 57.87 64.70 91.50 129.41 158.49 183.01 204.61 26 30 33 26 30 33
045033 0.84 0.45 0.63 0.78 0.90 1.01 1.24 1.43 2.02 2.85 3.77 35 40 48 35 40 48
045036 0.91 0.62 0.88 1.08 1.25 1.40 1.97 2.79 3.42 3.95 4.42 35 40 48 35 40 48
45 045040 1.02 0.76 1.07 1.31 1.51 1.69 2.39 3.39 4.15 4.79 5.35 39 45 47 39 45 47
045050 1.27 0.92 1.30 1.60 1.87 2.09 2.56 2.96 4.18 5.91 7.82 39 45 47 39 45 47
045055 1.40 1.22 1.73 2.12 2.45 2.74 3.35 3.87 5.48 7.75 10.25 39 45 47 39 45 47


Low-Pressure High-Pressure
Fan Angle Pressure kPa (Bars) (< 275 kPa) (*2) (> 275 kPa) (*2)
Nozzle
at 207 kpa Orifice
Number 100 200 300 400 500 750 1000 2000 4000 7000 138 275 552 345 552 689
(2.07 Bar) (mm)
(*2)
1.00 2.00 3.00 4.00 5.00 7.50 10.00 20.00 40.00 70.00 1.38 2.75 5.52 3.45 5.52 6.89
045070 1.78 1.69 2.39 2.93 3.38 3.78 4.63 5.35 7.57 10.70 14.16 39 45 47 39 45 47
045094 2.39 2.77 3.92 4.80 5.54 6.20 7.59 8.77 12.40 17.53 23.19 39 45 47 39 45 47
045110 2.79 3.95 5.58 6.84 7.90 8.83 10.81 12.48 17.66 24.97 33.03 39 45 47 39 45 47
045125 3.18 5.22 7.38 9.04 10.44 11.68 14.30 16.51 23.35 33.02 43.69 39 45 47 39 45 47
45 045144 3.66 8.04 11.37 13.93 16.09 17.98 25.43 35.97 44.05 50.87 56.87 40 45 48 40 45 48
045156 3.96 7.25 10.26 12.56 14.50 16.22 19.86 22.93 32.43 45.87 60.68 40 45 48 40 45 48
045171 4.37 9.15 12.94 15.85 18.31 20.47 25.07 28.94 40.93 57.89 76.58 40 45 48 40 45 48
045188 4.78 13.13 18.57 22.75 26.27 29.37 41.53 58.74 71.94 83.07 92.87 40 45 48 40 45 48
045250 6.35 20.05 28.35 34.72 40.09 44.82 54.90 63.39 89.65 126.78 167.72 40 45 48 40 45 48
57 057250 6.35 21.92 30.99 37.96 43.83 49.00 60.02 69.30 98.01 138.60 183.36 41 45 48 41 45 48
060028 0.71 0.23 0.32 0.39 0.46 0.51 0.62 0.72 1.02 1.44 1.91 53 57 60 53 57 60
060031 0.79 0.34 0.48 0.59 0.68 0.77 0.94 1.08 1.53 2.16 2.86 50 60 62 50 60 62
060040 1.02 0.54 0.77 0.94 1.09 1.21 1.49 1.72 2.43 3.43 4.54 50 60 62 50 60 62
060050 1.270 0.80 1.13 1.38 1.59 1.78 2.18 2.52 3.56 5.04 6.67 50 60 62 50 60 62
060055 1.40 1.27 1.80 2.21 2.55 2.85 3.49 4.03 5.69 8.05 10.65 50 60 62 50 60 62
060060 1.52 1.48 2.08 2.57 3.02 3.29 4.66 6.59 8.10 9.35 10.45 50 60 62 50 60 62
060062 1.58 1.62 2.29 2.83 3.32 3.62 5.12 7.24 8.91 10.28 11.49 50 60 62 50 60 62
060070 1.78 2.10 2.97 3.64 4.21 4.70 5.76 6.65 9.40 13.30 17.59 50 60 62 52 60 62
60 060079 2.01 2.67 3.77 4.62 5.34 5.97 8.44 11.93 14.62 16.88 18.87 50 60 62 54 60 62
060086 2.18 2.48 3.51 4.30 4.96 5.55 6.80 7.85 11.10 15.69 20.76 50 60 62 54 60 62
060094 2.39 2.88 4.08 5.00 5.77 6.45 7.90 9.12 12.90 18.25 24.14 50 60 62 54 60 63
060109 2.77 3.43 4.85 5.94 6.86 7.67 9.40 10.85 15.35 21.71 28.72 50 60 63 56 60 63
060118 3.00 4.51 6.38 7.82 9.03 10.09 12.36 14.27 20.18 28.54 37.76 51 60 63 56 60 63
060125 3.18 4.92 6.95 8.51 9.83 10.99 13.46 15.54 21.98 31.09 41.13 52 60 63 56 60 63
060156 3.96 7.17 10.14 12.42 14.34 16.04 19.64 22.68 32.07 45.36 60.00 53 60 63 56 60 63
060188 4.78 10.94 15.47 18.95 21.88 24.46 29.96 34.60 48.93 69.19 91.53 55 60 63 56 60 64
060250 6.35 25.74 36.40 44.58 51.48 57.55 81.39 115.10 140.97 162.78 182.00 56 60 63 58 60 64
070033 0.84 0.67 0.95 1.16 1.34 1.50 2.12 3.00 3.67 4.24 4.74 57 60 63 58 60 65
70
070141 3.58 7.12 10.06 12.32 14.23 15.91 22.50 31.82 38.97 45.00 50.32 60 60
075040 1.02 0.65 0.92 1.13 1.31 1.46 2.06 2.92 3.58 4.13 4.62 60 60
075055 1.40 1.01 1.43 1.75 2.02 2.26 3.19 4.51 5.52 6.38 7.13 64 64
75 075070 1.78 1.65 2.33 2.85 3.29 3.68 5.21 7.36 9.02 10.41 11.64 64 (*3) 64 (*3)
075075 1.91 1.49 2.11 2.59 2.99 3.34 4.72 6.68 8.18 9.44 10.56 65 65
075078 1.98 2.14 3.02 3.70 4.28 4.78 6.76 9.56 11.71 13.53 15.12 65 65
*1 Reference numbers only. Angle may change depending on the operational conditions such as water temperature, chemicals, viscosity, or build-up
contaminations.
*2 High-pressure nozzles are tested at 552 (5.52 Bar) and low-pressure nozzles are tested at 207 kPa (2.07 Bar) for the nominal angle.
*3 Maximum angle allowed on BF nozzle assembly is 65 degrees. Nominal angles higher than 65 degrees are meant to operate at lower pressures and
reach maximum angle.

Brush Shower Jet
Nozzles
Series BT Brush Shower Jet Nozzle
The BT series brush shower jet nozzle is designed to
deliver liquid in a solid stream. The disc can be installed in Retaining Nut, Nozzle – 1.375” – 12
all Kadant brush showers. Jet nozzles are available with C-25901
Duracerm ceramic, ruby or sapphire insert materials. Ruby
Jet Nozzle with Ruby Insert
and sapphire inserts have excellent erosion resistance to
liquid flow, maximizing nozzle life. Duracerm ceramic is
one of the toughest shower nozzle materials available and Disc, Nozzle Dome, Stamm and
will provide long life in brush showers. All 316SS nozzles Spraying Systems
are available with ArresTech plating as an option, which
Disc, Nozzle Dome, Kadant
has been shown to decrease wear imparted on a nozzle
due to brushing.
Gasket
C14217 = BTK (Kadant)
Construction A26460 = BTC (Stamm & Spraying Systems)
All BT series nozzles are constructed of 316SS. They are NONE = BTR, BTD, BTP
available for design pressure of 1000 psig. Nozzle discs are
available with ArresTech plating as an option. Base, Nozzle Casting – 1.375” – 12*
C25902-GP1 for use with Schedule 10 pipe
C25902-GP2 for use with Schedule 40 pipe
*Welded to shower - not normally replaced.
Not suitable for BZ or BTC bases.
Brush Shower Jet Nozzle Ordering Information Insert Material Code Construction Material Code
Ruby R ArresTech Plated 316SS A
BT R A 040 Sapphire P 316SS S
Nozzle Orifice Duracerm D
Series Number None – 316SS Kadant K
None – 316SS Stamm
C
Insert Construction or Spraying Systems
Material Material

Series BT Brush Shower Jet Nozzle

Material Nozzle Pressure (PSI)
Orifice
Sapphire/ 316 Orifice
Duracerm Number 20 40 60 80 100 200 400 600 800 1000
Ruby Stainless Steel (inch)
x 005 0.005 0.002 0.003 0.004 0.004 0.005 0.006 0.009 0.011 0.013 0.014
x 010 0.010 0.008 0.012 0.014 0.016 0.018 0.026 0.036 0.045 0.051 0.058
x 018 0.018 0.026 0.037 0.046 0.053 0.059 0.083 0.118 0.144 0.167 0.186
023 0.023 0.043 0.061 0.075 0.086 0.096 0.136 0.192 0.236 0.272 0.304
x x 028 0.028 0.065 0.092 0.113 0.130 0.145 0.206 0.291 0.356 0.411 0.460
x x 033 0.033 0.110 0.156 0.191 0.220 0.246 0.348 0.492 0.602 0.696 0.778
x x x 040 0.040 0.160 0.226 0.277 0.320 0.358 0.506 0.716 0.876 1.01 1.13
x 047 0.047 0.180 0.254 0.311 0.359 0.402 0.568 0.804 0.984 1.14 1.27
x x 055 0.055 0.295 0.417 0.511 0.590 0.660 0.933 1.32 1.62 1.87 2.09
x 070 0.070 0.400 0.566 0.693 0.800 0.894 1.26 1.79 2.19 2.53 2.83
x 078 0.078 0.559 0.790 0.968 1.12 1.25 1.77 2.50 3.06 3.53 3.95
x 094 0.094 0.815 1.15 1.41 1.63 1.82 2.58 3.64 4.46 5.15 5.76
x 125 0.125 1.33 1.87 2.29 2.65 2.96 4.19 5.93 7.26 8.38 9.37

Material Pressure kPa (Bars)
Nozzle
Orifice
Sapphire/ 316 Orifice 100 200 300 400 500 750 1000 2000 4000 7000
Duracerm Number
Ruby Stainless Steel (mm)
1.00 2.00 3.00 4.00 5.00 7.50 10.00 20.00 40.00 70.00
x 005 0.13 0.01 0.01 0.01 0.01 0.01 0.02 0.02 0.03 0.04 0.05
x 010 0.25 0.03 0.04 0.05 0.05 0.06 0.07 0.08 0.12 0.17 0.22
x 018 0.46 0.08 0.12 0.15 0.17 0.19 0.23 0.27 0.38 0.54 0.71
023 0.58 0.14 0.20 0.24 0.28 0.31 0.38 0.44 0.62 0.88 1.16
x x 028 0.71 0.21 0.30 0.36 0.42 0.47 0.57 0.66 0.94 1.32 1.75
x x 033 0.84 0.35 0.50 0.61 0.71 0.79 0.97 1.12 1.59 2.24 2.97
x x x 040 1.02 0.52 0.73 0.89 1.03 1.15 1.41 1.63 2.31 3.26 4.31
x 047 1.19 0.58 0.82 1.00 1.16 .13 .16 1.83 2.59 3.66 4.85
x x 055 1.40 0.95 1.34 1.65 1.90 2.13 2.60 3.01 4.25 6.01 7.96
x 070 1.78 1.29 1.82 2.23 2.58 2.88 3.53 4.08 5.77 8.15 10.79
x 078 1.98 1.80 2.55 3.12 3.60 4.03 4.93 5.69 8.05 11.39 15.06
x 094 2.39 2.63 3.72 4.55 5.25 5.87 7.19 8.31 11.75 16.61 21.98
x 125 3.18 4.27 6.04 7.40 8.54 9.55 11.70 13.51 19.10 27.01 35.73

Brush Shower Fan
Nozzles
Series BZ Brush Shower Fan Nozzle
The BZ brush shower fan nozzle is designed to deliver
liquid in a fan pattern with up to a 70° angle. It’s a self Retaining Nut, Nozzle – C-25901
aligning disc that can be installed in many commercially B37023 – ArresTech Plated 316SS
available shower bars.*
Disc, Nozzle Dome

* Replacement for Spraying Systems and Stamm brush
shower nozzles.
Construction Gasket Shower

All BZ series nozzles are constructed of 316SS. They are A26460 Gylon
available for application pressures greater than 40 psi.
Base, Nozzle Casting – 1.375” – 12*
1.05" 5°
1.09" Dia.
0.24"
1.02" Dia.
Brush Shower Fan Nozzle Ordering Information Construction Material Code Application Pressure Code
316SS S 40 psig and less L
BZ S L 015040 41 to 1000 psig H
Nozzle
Series Fan/Orifice
Number
Construction Application
Material Pressure


Fan Angle Pressure (PSI)
(degree)
Number (inch) 20 40 60 80 100 200 400 600 800 1000
at 80 psi
015040 0.040 0.17 0.25 0.30 0.35 0.39 0.55 0.78 0.96 1.11 1.24
015055 0.055 0.29 0.40 0.49 0.57 0.64 0.90 1.27 1.56 1.80 2.02
015070 0.070 0.49 0.70 0.85 0.99 1.10 1.56 2.21 2.70 3.12 3.49
15
015093 0.093 0.85 1.20 1.47 1.70 1.90 2.68 3.79 4.65 5.37 6.00
015109 0.109 1.01 1.43 1.73 2.00 2.24 3.16 4.47 5.48 6.32 7.07
015125 0.125 1.41 1.99 2.44 2.82 3.15 4.46 6.31 7.72 8.92 9.97
030040 0.040 0.17 0.23 0.29 0.33 0.37 0.52 0.74 0.90 1.04 1.17
030055 0.055 0.28 0.39 0.48 0.55 0.61 0.87 1.23 1.51 1.74 1.94
030063 0.063 0.40 0.57 0.70 0.80 0.90 1.27 1.80 2.20 2.55 2.85
030070 0.070 0.49 0.69 0.85 0.98 1.10 1.55 2.19 2.68 3.10 3.46
030094 0.094 0.85 1.20 1.47 1.70 1.90 2.69 3.80 4.66 5.38 6.01
030110 0.110 1.25 1.77 2.17 2.50 2.80 3.95 5.59 6.85 7.91 8.84
030125 0.125 1.41 1.99 2.44 2.82 3.15 4.46 6.31 7.72 8.92 9.97
030144 0.144 2.09 2.96 3.62 4.18 4.67 6.61 9.35 11.45 13.22 14.78
30
030156 0.156 2.31 3.27 4.00 4.62 5.17 7.30 10.33 12.65 14.61 16.33
030171 0.171 2.53 3.57 4.37 5.05 5.65 7.98 11.29 13.83 15.97 17.85
030188 0.188 3.35 4.74 5.80 6.70 7.49 10.59 14.98 18.35 21.19 23.69
030203 0.203 4.14 5.85 7.17 8.28 9.26 13.09 18.51 22.68 26.18 29.27
030218 0.218 5.05 7.14 8.75 10.10 11.29 15.97 22.58 27.66 31.94 35.71
030250 0.250 6.78 9.58 11.74 13.55 15.15 21.43 30.31 37.12 42.86 47.92
030281 0.281 7.78 11.00 13.47 15.56 17.39 24.60 34.79 42.61 49.20 55.01
030296 0.296 8.65 12.23 14.98 17.30 19.34 27.35 38.68 47.38 54.71 61.16
040111 0.111 1.21 1.70 2.09 2.41 2.69 3.81 5.39 6.60 7.62 8.52
40
040125 0.125 1.41 1.99 2.44 2.82 3.15 4.46 6.31 7.72 8.92 9.97
045033 0.033 0.14 0.20 0.24 0.28 0.31 0.44 0.63 0.77 0.89 0.99
045036 0.036 0.16 0.22 0.27 0.32 0.35 0.50 0.70 0.86 1.00 1.11
045040 0.040 0.17 0.25 0.30 0.35 0.39 0.55 0.78 0.96 1.11 1.24
045050 0.050 0.28 0.40 0.50 0.58 0.65 0.92 1.30 1.59 1.83 2.05
045055 0.055 0.38 0.54 0.66 0.76 0.85 1.20 1.70 2.08 2.40 2.69
045070 0.070 0.53 0.74 0.91 1.05 1.17 1.66 2.35 2.88 3.32 3.71
045094 0.094 0.86 1.22 1.49 1.72 1.92 2.72 3.85 4.71 5.44 6.08
45
045110 0.110 1.23 1.73 2.12 2.45 2.74 3.87 5.48 6.71 7.75 8.66
045125 0.125 1.62 2.29 2.81 3.24 3.62 5.12 7.24 8.87 10.25 11.46
045156 0.156 2.25 3.18 3.90 4.50 5.03 7.12 10.06 12.32 14.23 15.91
045171 0.171 2.84 4.02 4.92 5.68 6.35 8.98 12.70 15.56 17.96 20.08
045188 0.188 3.47 4.91 6.01 6.94 7.76 10.98 15.52 19.01 21.95 24.54
045250 0.250 6.22 8.80 10.77 12.44 13.91 19.67 27.82 34.07 39.34 43.98
045288 0.288 8.17 11.55 14.15 16.33 18.26 25.83 36.53 44.74 51.66 57.75
57 057250 0.250 6.80 9.62 11.78 13.60 15.21 21.50 30.41 37.25 43.01 48.08


Fan Angle Pressure (PSI)
(degree)
Number (inch) 20 40 60 80 100 200 400 600 800 1000
at 80 psi
060028 0.028 0.07 0.10 0.12 0.14 0.16 0.22 0.32 0.39 0.45 0.50
060031 0.031 0.11 0.15 0.18 0.21 0.24 0.34 0.47 0.58 0.67 0.75
060040 0.040 0.17 0.24 0.29 0.34 0.38 0.53 0.75 0.92 1.07 1.19
060050 0.050 0.25 0.35 0.43 0.49 0.55 0.78 1.11 1.35 1.56 1.75
060055 0.055 0.40 0.56 0.68 0.79 0.88 1.25 1.77 2.16 2.50 2.79
060062 0.062 0.39 0.55 0.68 0.78 0.88 1.24 1.75 2.15 2.48 2.77
060070 0.070 0.65 0.92 1.13 1.30 1.46 2.06 2.92 3.57 4.13 4.61
060079 0.079 0.69 0.98 1.20 1.39 1.55 2.19 3.10 3.80 4.39 4.91
60
060086 0.086 0.77 1.09 1.33 1.54 1.72 2.43 3.44 4.22 4.87 5.44
060094 0.094 0.90 1.27 1.55 1.79 2.00 2.83 4.00 4.90 5.66 6.33
060109 0.109 1.07 1.51 1.84 2.13 2.38 3.37 4.76 5.83 6.74 7.53
060118 0.118 1.40 1.98 2.42 2.80 3.13 4.43 6.26 7.67 8.85 9.90
060125 0.125 1.53 2.16 2.64 3.05 3.41 4.82 6.82 8.35 9.64 10.78
060141 0.141 1.87 2.65 3.24 3.75 4.19 5.92 8.37 10.26 11.84 13.24
060156 0.156 2.23 3.15 3.85 4.45 4.98 7.04 9.95 12.19 14.07 15.73
060188 0.188 3.39 4.80 5.88 6.79 7.59 10.73 15.18 18.59 21.47 24.00
070033 0.033 0.18 0.26 0.31 0.36 0.40 0.57 0.81 0.99 1.14 1.28
70
070070 0.070 0.43 0.61 0.75 0.86 0.96 1.36 1.92 2.36 2.72 3.04
075040 0.040 0.17 0.24 0.30 0.35 0.39 0.55 0.77 0.94 1.09 1.22
075055 0.055 0.27 0.38 0.46 0.53 0.60 0.84 1.19 1.46 1.69 1.88
75
075075 0.075 0.39 0.56 0.68 0.79 0.88 1.25 1.76 2.16 2.50 2.79
075078 0.078 0.57 0.80 0.98 1.13 1.26 1.79 2.53 3.09 3.57 4.00


Fan Angle Pressure kPa (Bars)
Nozzle
(degree)
Code Orifice 100 200 300 400 500 750 1000 2000 4000 7000
at 552 kPa
(mm)
(5.52 Bar) 1.00 2.00 3.00 4.00 5.00 7.50 10.00 20.00 40.00 70.00
015040 1.02 0.52 0.73 0.89 1.03 1.15 1.41 1.63 2.31 3.26 4.31
015055 1.40 0.92 1.30 1.59 1.84 2.05 2.52 2.90 4.11 5.81 7.69
015070 1.78 1.59 2.25 2.75 3.18 3.56 4.35 5.03 7.11 10.06 13.30
15
015093 2.36 2.74 3.87 4.74 5.47 6.12 7.49 8.65 12.23 17.30 22.88
015109 2.77 3.26 4.61 5.58 6.45 7.21 8.83 10.19 14.41 20.38 26.96
015125 3.18 5.33 6.42 7.87 9.09 10.37 11.97 14.36 20.31 28.73 38.01
030040 1.02 0.53 0.75 0.92 1.06 1.19 1.46 1.68 2.38 3.36 4.45
030055 1.40 0.89 1.25 1.54 1.77 1.98 2.43 2.80 3.96 5.61 7.42
030063 1.60 1.30 1.83 2.25 2.59 2.90 3.55 4.10 5.80 8.21 10.85
030070 1.78 1.58 2.23 2.74 3.16 3.53 4.33 4.99 7.06 9.99 13.21
030094 2.39 2.74 3.87 4.75 5.48 6.13 7.50 8.66 12.25 17.33 22.92
030110 2.79 4.03 5.70 6.98 8.06 9.01 11.03 12.74 18.02 25.48 33.71
030125 3.18 4.54 6.43 7.87 9.09 10.16 12.45 14.37 20.32 28.74 38.02
030144 3.66 6.74 9.53 11.67 13.47 15.06 18.45 21.30 30.12 42.60 56.35
30
030156 3.96 7.45 10.53 12.90 14.89 16.65 20.39 23.55 33.30 47.09 62.30
030171 4.34 8.14 11.51 14.10 16.28 18.20 22.29 25.74 36.40 51.47 68.09
030188 4.78 10.80 15.27 18.70 21.60 24.14 29.57 34.15 48.29 68.29 90.34
030203 5.16 13.34 18.87 23.11 26.68 29.83 36.54 42.19 59.67 84.38 111.63
030218 5.54 16.28 23.02 28.19 32.55 36.40 44.58 51.47 72.79 102.95 136.19
030250 6.35 21.84 30.89 37.83 43.69 48.84 59.82 69.08 97.69 138.15 182.76
030281 7.14 25.07 35.46 43.43 50.15 56.07 68.67 79.29 112.14 158.58 209.79
030296 7.52 5.85 7.04 8.63 9.96 11.37 13.13 15.75 22.28 31.50 41.68
040111 2.82 3.88 5.49 6.73 7.77 8.68 10.64 12.28 17.37 24.56 32.50
40
040125 8.00 5.33 6.42 7.87 9.09 10.37 11.97 14.36 20.31 28.73 38.01
045033 0.84 0.45 0.63 0.78 0.90 1.01 1.24 1.43 2.02 2.85 3.77
045036 0.91 0.62 0.88 1.08 1.25 1.40 1.97 2.79 3.42 3.95 4.42
045040 1.02 0.76 1.07 1.31 1.51 1.69 2.39 3.39 4.15 4.79 5.35
045050 1.27 0.92 1.30 1.60 1.87 2.09 2.56 2.96 4.18 5.91 7.82
045055 1.40 1.22 1.73 2.12 2.45 2.74 3.35 3.87 5.48 7.75 10.25
045070 1.78 1.69 2.39 2.93 3.38 3.78 4.63 5.35 7.57 10.70 14.16
045094 2.39 2.77 3.92 4.80 5.54 6.20 7.59 8.77 12.40 17.53 23.19
45
045110 2.79 3.95 5.58 6.84 7.90 8.83 10.81 12.48 17.66 24.97 33.03
045125 3.18 5.22 7.38 9.04 10.44 11.68 14.30 16.51 23.35 33.02 43.69
045156 3.96 7.25 10.26 12.56 14.50 16.22 19.86 22.93 32.43 45.87 60.68
045171 4.37 9.15 12.94 15.85 18.31 20.47 25.07 28.94 40.93 57.89 76.58
045188 4.78 10.94 15.48 18.96 21.89 24.98 28.85 34.61 48.95 69.22 91.57
045250 6.35 20.05 28.35 34.72 40.09 44.82 54.90 63.39 89.65 126.78 167.72
045288 7.32 26.39 37.24 45.60 52.66 60.08 69.40 83.26 117.75 166.52 220.28
57 057250 6.35 21.92 30.99 37.96 43.83 49.00 60.02 69.30 98.01 138.60 183.36


Fan Angle Code Nozzle Pressure kPa (Bars)
(degree) Orifice
at 552 kPa (mm) 100 200 300 400 500 750 1000 2000 4000 7000
(5.52 Bar) 1.00 2.00 3.00 4.00 5.00 7.50 10.00 20.00 40.00 70.00
060028 0.71 0.23 0.32 0.39 0.46 0.51 0.62 0.72 1.02 1.44 1.91
060031 0.79 0.34 0.48 0.59 0.68 0.77 0.94 1.08 1.53 2.16 2.86
060040 1.02 0.54 0.77 0.94 1.09 1.21 1.49 1.72 2.43 3.43 4.54
060050 1.270 0.80 1.13 1.38 1.59 1.78 2.18 2.52 3.56 5.04 6.67
060055 1.40 1.27 1.80 2.21 2.55 2.85 3.49 4.03 5.69 8.05 10.65
060062 1.52 0.87 1.23 1.50 1.73 1.94 2.74 3.88 4.75 5.48 6.13
060070 1.57 1.26 1.79 2.19 2.53 2.82 3.46 3.99 5.65 7.99 10.57
060079 1.78 2.24 3.16 3.87 4.47 5.10 5.90 7.07 10.00 14.14 18.71
60
060086 2.01 2.67 3.77 4.62 5.34 5.97 8.44 11.93 14.62 16.88 18.87
060094 2.18 2.48 3.51 4.30 4.96 5.55 6.80 7.85 11.10 15.69 20.76
060109 2.39 2.88 4.08 5.00 5.77 6.45 7.90 9.12 12.90 18.25 24.14
060118 2.77 3.43 4.85 5.94 6.86 7.67 9.40 10.85 15.35 21.71 28.72
060125 3.00 4.51 6.38 7.82 9.03 10.09 12.36 14.27 20.18 28.54 37.76
060141 3.18 5.75 8.11 9.94 11.47 13.09 15.12 18.14 25.66 36.28 48.00
060156 3.96 7.17 10.14 12.42 14.34 16.04 19.64 22.68 32.07 45.36 60.00
060188 4.78 10.94 15.47 18.95 21.88 24.46 29.96 34.60 48.93 69.19 91.53
070033 6.35 0.58 0.82 1.01 1.16 1.33 1.53 1.84 2.60 3.68 4.87
70
070070 0.84 1.39 1.96 2.40 2.77 3.16 3.65 4.38 6.20 8.77 11.60
075040 3.58 7.12 10.06 12.32 14.23 15.91 22.50 31.82 38.97 45.00 50.32
075055 1.02 0.24 0.33 0.41 0.47 0.54 0.62 0.75 1.06 1.50 1.98
75
075075 1.40 1.26 1.78 2.18 2.52 2.87 3.32 3.98 5.63 7.97 10.54
075078 1.78 1.82 2.57 3.15 3.64 4.15 4.79 5.75 8.13 11.50 15.21

Disc Fan/Jet Nozzles
DL
DF DJ
Products
u Series DF Fan Disc Nozzle.................................................................................. 57
u Series DJ Jet Disc Nozzle................................................................................... 60
u Series DL Threaded Fan and Jet Disc Nozzle...................................................... 62
u Series DS Fan and Needle Jet Disc Nozzle.......................................................... 65
56 Go to Main TOC
Fan Disc Nozzles
Series DF Fan Disc Nozzle

The DF fan disc nozzle is designed to deliver liquid in Nut, Nozzle Retainer
a fan pattern with up to a 90° angle. The disc has been 3/4”-27
designed for long life, and to minimize both nozzle 2007 – 316SS
plugging and water use. The optional extension tube B36766 – 316SS with ArresTech
is available for nozzles installed on the bottom of a plating
shower pipe (3 to 9 o’clock) to prevent debris from
being drawn from the bottom of the pipe and into Fan Disc
the nozzle, causing it to plug.
The DF disc can be used in place of the FH or VH fan

inserts or the DJ nozzle disc. Extension Tube (left)
A-19691 Extension Tube, Internal, 1.2”
Construction Spacer (right)
All DF series nozzles are constructed of 316SS. As an 2148 (nylon)
option, the disc retainer nut can be plated with 2148A (316SS)
ArresTech to prevent thread galling during installation.
The nozzles are designed for use in systems that operate Base Nozzle*
up to 300 psig. 3/4”-27
2006C – Base Nozzle
*Welded to shower – not normally
replaced.
0.073"
0.58"
Outlet Side Inlet Side
Fan Disc Ordering Information Construction Material Code

316SS S
DF S 045040
Nozzle
Series Fan/Orifice
Number
Construction
Material
Go to Disc Fan/Jet Nozzles Tab 57


40 psi (inch) 20 40 60 80 100 150 200 300 20 40 80
DF30028 0.028 0.08 0.11 0.14 0.16 0.18 0.21 0.25 0.30 23 30 34
DF30033 0.033 0.11 0.15 0.19 0.22 0.24 0.30 0.34 0.42 23 30 34
DF30040 0.040 0.16 0.23 0.28 0.32 0.36 0.44 0.51 0.62 24 30 34
DF30055 0.055 0.30 0.43 0.52 0.61 0.68 0.83 0.96 1.17 24 30 34
DF30070 0.070 0.49 0.69 0.85 0.98 1.10 1.34 1.55 1.90 25 30 34
DF30093 0.093 0.88 1.25 1.53 1.77 1.98 2.42 2.80 3.42 24 30 34
30 DF30125 0.125 1.56 2.21 2.71 3.13 3.50 4.28 4.94 6.05 25 30 34
DF30156 0.156 2.43 3.44 4.22 4.87 5.44 6.67 7.70 9.43 25 30 34
DF30180 0.180 3.24 4.58 5.61 6.48 7.25 8.88 10.25 12.55 25 30 34
DF30187 0.187 3.54 5.00 6.12 7.07 7.91 9.68 11.18 13.69 25 30 34
DF30191 0.191 3.69 5.22 6.39 7.38 8.25 10.11 11.67 14.29 26 30 34
DF30219 0.219 4.80 6.79 8.31 9.60 10.73 13.14 15.17 18.58 26 30 34
DF30250 0.250 6.25 8.84 10.83 12.51 13.98 17.12 19.77 24.22 26 30 34
DF45028 0.028 0.08 0.11 0.14 0.16 0.18 0.22 0.25 0.31 38 45 49
DF45033 0.033 0.11 0.16 0.19 0.22 0.25 0.31 0.35 0.43 38 45 49
DF45040 0.040 0.16 0.23 0.28 0.33 0.37 0.45 0.52 0.64 38 45 49
DF45055 0.055 0.31 0.44 0.54 0.62 0.69 0.85 0.98 1.20 39 45 49
DF45070 0.070 0.50 0.71 0.87 1.00 1.12 1.38 1.59 1.95 40 45 49
45
DF45093 0.093 0.91 1.28 1.57 1.81 2.03 2.48 2.86 3.51 40 45 49
DF45125 0.125 1.60 2.26 2.77 3.20 3.58 4.39 5.06 6.20 41 45 49
DF45156 0.156 2.49 3.53 4.32 4.99 5.58 6.83 7.89 9.66 41 45 49
DF45187 0.187 3.62 5.12 6.27 7.25 8.10 9.92 11.46 14.03 40 45 49
DF45219 0.219 4.92 6.95 8.51 9.83 10.99 13.46 15.55 19.04 40 45 49
DF60028 0.028 0.08 0.12 0.14 0.17 0.18 0.23 0.26 0.32 52 60 64
DF60033 0.033 0.11 0.16 0.20 0.23 0.26 0.31 0.36 0.44 52 60 64
DF60040 0.040 0.17 0.24 0.29 0.34 0.38 0.46 0.53 0.65 53 60 64
DF60055 0.055 0.32 0.45 0.55 0.64 0.71 0.87 1.01 1.23 53 60 64
60
DF60070 0.070 0.52 0.73 0.89 1.03 1.15 1.41 1.63 2.00 55 60 64
DF60093 0.093 0.93 1.32 1.61 1.86 2.08 2.55 2.94 3.60 55 60 64
DF60125 0.125 1.65 2.33 2.85 3.29 3.68 4.51 5.20 6.37 55 60 64
DF60156 0.156 2.56 3.62 4.44 5.13 5.73 7.02 8.11 9.93 55 60 64
DF90016 0.016 0.03 0.05 0.06 0.06 0.07 0.09 0.10 0.13 84 90 96
DF90022 0.022 0.06 0.09 0.11 0.12 0.14 0.17 0.19 0.24 84 90 96
DF90028 0.028 0.10 0.14 0.17 0.20 0.22 0.27 0.31 0.38 84 90 96
DF90033 0.033 0.14 0.19 0.24 0.28 0.31 0.38 0.44 0.53 84 90 95
90 DF90040 0.040 0.20 0.29 0.35 0.40 0.45 0.55 0.64 0.78 85 90 94
DF90055 0.055 0.38 0.54 0.66 0.76 0.86 1.05 1.21 1.48 85 90 94
DF90070 0.070 0.62 0.88 1.07 1.24 1.39 1.70 1.96 2.40 85 90 93
DF90093 0.093 1.12 1.58 1.93 2.23 2.50 3.06 3.53 4.33 86 90 93
DF90125 0.125 1.98 2.79 3.42 3.95 4.42 5.41 6.25 7.65 85 90 93
58 Go to Disc Fan/Jet Nozzles Tab


Fan Pressure kPa (Bars) Fan Angle at kPa (Bar)*
Angle Nozzle Fan
(degree) Code Orifice Angle 100 200 300 400 500 1000 1500 2000 138 275 552
at 275 kPa (mm) (degree)
(2.75 Bar) 1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00 1.38 2.75 5.52
DF30028 0.71 30 0.25 0.36 0.44 0.51 0.57 0.80 0.98 1.13 23 30 34
DF30033 0.84 30 0.35 0.50 0.61 0.70 0.79 1.11 1.36 1.57 23 30 34
DF30040 1.02 30 0.52 0.73 0.89 1.03 1.15 1.63 2.00 2.31 24 30 34
DF30055 1.40 30 0.98 1.38 1.69 1.95 2.18 3.08 3.78 4.36 24 30 34
DF30070 1.78 30 1.58 2.23 2.74 3.16 3.53 5.00 6.12 7.07 25 30 34
DF30093 2.36 30 2.85 4.03 4.94 5.70 6.37 9.01 11.04 12.74 24 30 34
30 DF30125 3.18 30 5.04 7.13 8.73 10.10 11.30 15.90 19.51 22.53 25 30 34
DF30156 3.96 30 7.85 11.10 13.60 15.70 17.50 24.80 30.39 35.09 25 30 34
DF30180 4.57 30 10.40 14.80 18.10 20.90 23.40 33.00 40.46 46.72 25 30 34
DF30187 4.75 30 11.40 16.10 19.70 22.80 25.50 36.00 44.14 50.97 25 30 34
DF30191 4.85 30 11.76 16.63 20.36 23.51 26.29 37.17 45.53 52.57 25 30 34
DF30219 5.56 30 15.50 21.90 26.80 30.90 34.60 48.90 59.90 69.16 26 30 34
DF30250 6.35 30 20.20 28.50 34.90 40.30 45.10 63.70 78.06 90.13 26 30 34
DF45028 0.71 45 0.26 0.37 0.45 0.52 0.58 0.82 1.00 1.16 26 30 34
DF45033 0.84 45 0.36 0.51 0.62 0.72 0.80 1.14 1.39 1.61 38 45 49
DF45040 1.02 45 0.53 0.75 0.92 1.06 1.18 1.67 2.05 2.36 38 45 49
DF45055 1.40 45 1.00 1.41 1.73 2.00 2.23 3.16 3.87 4.47 38 45 49
DF45070 1.78 45 1.62 2.29 2.80 3.24 3.62 5.12 6.27 7.24 39 45 49
45
DF45093 2.36 45 2.92 4.13 5.06 5.84 6.53 9.23 11.31 13.06 40 45 49
DF45125 3.18 45 5.16 7.30 8.94 10.30 11.50 16.30 19.99 23.09 40 45 49
DF45156 3.96 45 8.04 11.40 13.90 16.10 18.00 25.40 31.14 35.96 41 45 49
DF45187 4.75 45 11.70 16.50 20.20 23.40 26.10 36.90 45.23 52.22 41 45 49
DF45219 5.56 45 15.80 22.40 27.40 31.70 35.40 50.10 61.37 70.86 40 45 49
DF60028 0.71 60 0.27 0.38 0.46 0.53 0.60 0.84 1.03 1.19 40 45 49
DF60033 0.84 60 0.37 0.52 0.64 0.74 0.83 1.17 1.43 1.65 52 60 64
DF60040 1.02 60 0.54 0.77 0.94 1.09 1.21 1.72 2.10 2.43 52 60 64
DF60055 1.40 60 1.03 1.45 1.78 2.05 2.30 3.25 3.98 4.59 53 60 64
60
DF60070 1.78 60 1.66 2.35 2.88 3.33 3.53 5.26 6.44 7.44 53 60 64
DF60093 2.36 60 3.00 4.24 5.20 6.00 6.71 9.49 11.62 13.41 55 60 64
DF60125 3.18 60 5.30 7.50 9.19 10.60 11.90 16.80 20.50 23.70 55 60 64
DF60156 3.96 60 8.26 11.70 14.30 16.50 18.50 26.10 32.00 36.95 55 60 64
DF90016 0.41 90 0.10 0.15 0.18 0.21 0.23 0.33 0.40 0.47 55 60 64
DF90022 0.56 90 0.20 0.28 0.34 0.39 0.44 0.62 0.76 0.88 84 90 96
DF90028 0.71 90 0.32 0.45 0.55 0.64 0.71 1.01 1.24 1.43 84 90 96
DF90033 0.84 90 0.44 0.63 0.77 0.89 0.99 1.40 1.72 1.98 84 90 96
90 DF90040 1.02 90 0.65 0.92 1.13 1.30 1.46 2.06 2.53 2.92 84 90 95
DF90055 1.40 90 1.23 1.74 2.14 2.47 2.76 3.90 4.77 5.51 85 90 94
DF90070 1.78 90 2.00 2.82 3.46 3.99 4.46 6.31 7.73 8.93 85 90 94
DF90093 2.36 90 3.60 5.09 6.24 7.20 8.05 11.40 13.95 16.10 85 90 93
DF90125 3.18 90 6.37 9.00 11.00 12.70 14.20 20.10 24.66 28.48 86 90 93

Jet Disc Nozzles
Series DJ Jet Disc Nozzle
The DJ jet disc nozzle can be supplied in 316SS Nut, Nozzle Retainer
construction or with Duracerm ceramic, ruby, or sapphire 3/4”-27
insert material. The nozzle is designed to deliver a solid 2007 – 316SS
stream of water at a wide range of pressures. Ruby and B36766 – 316SS with ArresTech plating
sapphire inserts have excellent erosion resistance to liquid
flow, maximizing nozzle life. Duracerm ceramic is one of Jet Disc
the toughest shower nozzle materials available. It will
withstand thermal shock and provide long service life.
The optional extension tube is available for nozzles
installed on the bottom of a shower pipe (3 to 9 o’clock)
to prevent debris from being draw n from the bottom of Extension Tube (left)
the pipe and into the nozzle, causing it to plug. A-19691 Extension Tube, Internal, 1.2”
The DJ jet disc can be used in place of the FH or VH fan Spacer (right)
inserts, or the VF nozzle disc. 2148 (nylon)
2148A (316SS)
Construction
All DJ series nozzles are constructed of 316SS. As an option, Base Nozzle*
the nozzle retainer nut can be plated with ArresTech to 3/4”-27
prevent thread galling during installation. The nozzles are 2006C — Base Nozzle
designed for use in systems that operate up to 300 psig. *Welded to shower – not normally
replaced. Only for use with 0.58”
diameter disc.
0.58" 0.625"
Insert
Jet Disc Jet Disc

Solid 316ss Duracerm/Ruby/Sapphire Insert
Can be used to replace discs made by

Sinclair, Stamm, and Spraying Systems.
Jet Disc Ordering Information Construction Material Code Insert Material Code
316SS S Ruby R
DJ R S 040 Sapphire P
Nozzle Duracerm D
Series Orifice
Number 316SS S
Insert Construction
Material Material

Series DJ Jet Disc Nozzle

Material Pressure (PSI)
Orifice
Nozzle
316 Diameter
Duracerm Number
Stainless Ruby/Sapphire (inch) 20 40 60 80 100 150 200 300
Ceramic
Steel
x 000 0.000 Nozzle Blank (316 stainless steel) used to disable flow
x 005 0.005 0.002 0.003 0.004 0.004 0.005 0.006 0.006 0.008
x x 010 0.010 0.008 0.012 0.014 0.016 0.018 0.022 0.026 0.032
x 014 0.014 0.016 0.023 0.028 0.032 0.036 0.044 0.050 0.062
x x 018 0.018 0.026 0.037 0.046 0.053 0.059 0.072 0.083 0.102
x x 023 0.023 0.043 0.061 0.075 0.086 0.096 0.118 0.136 0.167
x x 028 0.028 0.064 0.090 0.110 0.128 0.143 0.175 0.202 0.247
x x 033 0.033 0.089 0.125 0.153 0.177 0.198 0.243 0.280 0.343
x x x 040 0.040 0.13 0.18 0.23 0.26 0.29 0.36 0.41 0.50
x 055 0.055 0.25 0.35 0.43 0.49 0.55 0.67 0.78 0.95
x 070 0.070 0.40 0.56 0.69 0.80 0.89 1.09 1.26 1.54
x 073 0.073 0.43 0.61 0.75 0.87 0.97 1.19 1.37 1.68
x 076 0.076 0.47 0.66 0.81 0.94 1.05 1.29 1.49 1.82
x 093 0.093 0.72 1.02 1.24 1.44 1.61 1.97 2.27 2.78
x 125 0.125 1.27 1.80 2.20 2.54 2.84 3.48 4.02 4.92
x 156 0.156 1.98 2.80 3.43 3.96 4.43 5.42 6.26 7.67
x 187 0.187 2.88 4.07 4.98 5.75 6.43 7.87 9.09 11.14
x 219 0.219 3.90 5.52 6.76 7.80 8.72 10.68 12.34 15.11

Material Pressure kPa (Bars)
Orifice
316 Nozzle
Duracerm Diameter 100 200 300 400 500 1000 1500 2000
Stainless Ruby/Sapphire Number
Ceramic (mm)
Steel 1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00
x 000 0.000 Nozzle Blank (316 stainless steel) used to disable flow
x 005 0.13 0.01 0.01 0.01 0.01 0.01 0.02 0.03 0.03
x x 010 0.25 0.03 0.04 0.05 0.05 0.06 0.08 0.10 0.12
x 014 0.36 0.05 0.07 0.09 0.10 0.11 0.16 0.20 0.23
x x 018 0.46 0.08 0.12 0.15 0.17 0.19 0.27 0.33 0.38
x x 023 0.58 0.14 0.20 0.24 0.28 0.31 0.44 0.54 0.62
x x 028 0.71 0.21 0.29 0.36 0.41 0.46 0.65 0.80 0.92
x x 033 0.84 0.29 0.40 0.49 0.57 0.64 0.90 1.11 1.28
x x x 040 1.02 0.42 0.59 0.73 0.84 0.94 1.33 1.62 1.88
x 055 1.40 0.79 1.12 1.37 1.59 1.77 2.51 3.07 3.55
x 070 1.78 1.28 1.82 2.23 2.57 2.87 4.06 4.98 5.75
x 073 1.85 1.40 1.98 2.42 2.79 3.12 4.42 5.41 6.25
x 076 1.93 1.51 2.14 2.62 3.03 3.39 4.79 5.86 6.77
x 093 2.36 2.32 3.28 4.01 4.63 5.18 7.33 8.97 10.36
x 125 3.18 4.10 5.79 7.10 8.19 9.16 13.00 15.87 18.32
x 156 3.96 6.38 9.02 11.10 12.80 14.30 20.20 24.71 28.54
x 187 4.75 9.27 13.10 16.10 18.50 20.70 29.30 35.89 41.45
x 219 5.56 12.60 17.80 21.80 25.20 28.10 39.80 48.71 56.24

Threaded Fan &
Jet Disc Nozzles
Series DL Threaded Fan and Jet Disc Nozzle
The DL threaded fan and jet disc nozzle is typically used
for applications where space is limited. Disc installation Fan Disc
can be accomplished so it does not extend beyond the
wall of the pipe. The minimum recommended pipe
size for installation is 1” schedule 80, with optimal
engagement in 1.25” schedule 80 and larger pipes. Jet Disc
Construction
All DL series nozzles are constructed of 316SS. The nozzles
0.125" 0.125"
0.625" 0.625"
5/8-18 UNF 5/8-18 UNF
Fan Disc Jet Disc
Fan/Jet Disc Ordering Information Construction Material Code

316SS S
DL S 000040
Nozzle
Series Fan/Orifice
Number
Construction
Material

Series DL Threaded Fan and Jet
Disc Nozzle
Fan Angle Pressure (PSI) Fan Angle Degree at psi*
Nozzle Orifice
(degree)
Number (inch) 20 40 60 80 100 150 200 300 20 40 80
at 40 psi
00031 0.031 0.08 0.11 0.14 0.16 0.17 0.21 0.25 0.30 0 0 0
00040 0.040 0.13 0.18 0.23 0.26 0.29 0.36 0.41 0.50 0 0 0
Jet 00062 0.062 0.31 0.44 0.54 0.63 0.70 0.86 0.99 1.21 0 0 0
00093 0.093 0.72 1.02 1.24 1.44 1.61 1.97 2.27 2.78 0 0 0
00125 0.125 1.27 1.80 2.20 2.54 2.84 3.48 4.02 4.92 0 0 0
30063 0.062 0.38 0.54 0.67 0.77 0.86 1.05 1.22 1.49 25 30 34
30094 0.094 0.88 1.25 1.53 1.77 1.98 2.42 2.80 3.42 25 30 34
30
30125 0.125 1.56 2.21 2.71 3.13 3.50 4.28 4.94 6.05 25 30 34
30156 0.156 2.43 3.44 4.22 4.87 5.44 6.67 7.70 9.43 25 30 34
60031 0.031 0.10 0.14 0.18 0.20 0.23 0.28 0.32 0.39 52 60 64
60040 0.040 0.17 0.24 0.29 0.34 0.38 0.46 0.53 0.65 52 60 64
60062 0.062 0.40 0.57 0.70 0.81 0.91 1.11 1.28 1.57 53 60 64
60093 0.093 0.93 1.32 1.61 1.86 2.08 2.55 2.94 3.60 53 60 64
60118 0.118 1.47 2.07 2.54 2.93 3.28 4.02 4.64 5.68 55 60 64
60
60125 0.125 1.65 2.33 2.85 3.29 3.68 4.51 5.20 6.37 55 60 64
60156 0.156 2.56 3.62 4.44 5.13 5.73 7.02 8.11 9.93 55 60 64
60187 0.187 3.68 5.21 6.38 7.37 8.24 10.09 11.65 14.27 55 60 64
60219 0.219 5.05 7.15 8.75 10.10 11.30 13.84 15.98 19.57 55 60 64
60250 0.250 6.58 9.31 11.40 13.17 14.72 18.03 20.82 25.50 55 60 64
80031 0.031 0.11 0.15 0.18 0.21 0.24 0.29 0.34 0.41 68 80 89
80040 0.040 0.17 0.25 0.36 0.35 0.95 0.48 0.56 0.69 70 80 87
80062 0.062 0.28 0.40 0.49 0.57 0.63 0.77 0.89 1.10 71 80 86
80 80093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 74 80 83
80118 0.118 1.71 2.41 2.95 3.41 3.81 4.67 5.39 6.61 74 80 83
80125 0.125 1.91 2.71 3.32 3.83 4.28 5.24 6.05 7.41 74 80 83
80156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 11.0 74 80 83
90031 0.031 0.12 0.17 0.21 0.24 0.27 0.33 0.38 0.46 86 90 93
90040 0.040 0.20 0.29 0.35 0.40 0.45 0.55 0.64 0.78 86 90 93
90062 0.062 0.48 0.68 0.83 0.96 1.07 1.32 1.52 1.86 86 90 93
90 90093 0.093 1.12 1.58 1.93 2.23 2.50 3.06 3.53 4.33 86 90 93
90118 0.118 1.74 2.46 3.01 3.48 3.89 4.76 5.50 6.74 86 90 93
90125 0.125 1.98 2.79 3.42 3.95 4.42 5.41 6.25 7.65 86 90 93
90156 0.156 3.04 4.30 5.27 6.08 6.80 8.33 9.61 11.77 86 90 93

Series DL Threaded Fan and Jet
Disc Nozzle
Fan Angle Degree
at kPa (Bars)*
(degree) Nozzle Orifice
at 275 kPa Number (mm) 100 200 300 400 500 1000 1500 2000 138 275 552
(2.75 Bar) 1.38 2.75 5.52
1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00
00031 0.787 0.25 0.36 0.44 0.50 0.56 0.80 0.98 1.13 0 0 0
00040 1.016 0.42 0.59 0.73 0.84 0.94 1.33 1.62 1.88 0 0 0
Jet 00062 1.570 0.99 1.41 1.72 1.99 2.22 3.14 3.85 4.44 0 0 0
00093 2.360 2.32 3.28 4.01 4.63 5.18 7.33 8.97 10.36 0 0 0
00125 3.180 4.10 5.79 7.10 8.19 9.16 13.00 15.87 18.32 0 0 0
30063 1.570 1.24 1.75 2.15 2.48 2.77 3.92 4.80 5.54 25 30 34
30094 2.388 2.85 4.03 4.94 5.70 6.37 9.01 11.04 12.74 25 30 34
30
30125 3.180 5.04 7.13 8.73 10.10 11.30 15.90 19.51 22.53 25 30 34
30156 3.960 7.85 11.10 13.60 15.70 17.50 24.80 30.39 35.09 25 30 34
60031 0.787 0.33 0.46 0.56 0.65 0.73 1.03 1.26 1.46 52 60 64
60040 1.016 0.54 0.77 0.94 1.09 1.21 1.72 2.10 2.43 52 60 64
60062 1.570 1.30 1.85 2.26 2.61 2.92 4.13 5.05 5.83 53 60 64
60093 2.360 3.00 4.24 5.20 6.00 6.71 9.49 11.62 13.41 53 60 64
60118 3.000 4.73 6.68 8.19 9.45 10.60 14.90 18.30 21.14 55 60 64
60
60125 3.180 5.30 7.50 9.19 10.60 11.90 16.80 20.54 23.72 55 60 64
60156 3.960 8.26 11.70 14.30 16.50 18.50 26.10 32.00 36.95 55 60 64
60187 4.750 11.80 16.68 20.43 23.59 26.37 37.30 45.68 52.75 55 60 64
60219 5.563 16.23 22.95 28.11 32.46 36.29 51.32 62.85 72.58 55 60 64
60250 6.350 21.17 29.94 36.67 42.34 47.33 66.94 81.99 94.67 55 60 64
80031 0.787 0.42 0.59 0.72 0.84 0.95 1.10 1.32 1.87 68 80 89
80040 1.016 0.70 0.98 1.21 1.39 1.59 1.83 2.20 3.11 70 80 87
80062 1.575 1.67 2.36 2.90 3.34 3.82 4.41 5.29 7.48 71 80 86
80 80093 2.362 3.76 5.32 6.52 7.53 8.59 9.92 11.90 16.83 74 80 83
80118 2.997 6.06 8.57 10.49 12.11 13.82 15.97 19.15 27.09 74 80 83
80125 3.175 6.80 9.61 11.77 13.59 15.51 17.92 21.49 30.40 74 80 83
80156 3.962 10.58 14.97 18.34 21.17 24.16 27.91 33.48 47.34 74 80 83
90031 0.787 0.46 0.64 0.79 0.91 1.04 1.20 1.44 2.04 86 90 93
90040 1.016 0.76 1.07 1.31 1.52 1.73 2.00 2.40 3.39 86 90 93
90062 1.575 1.82 2.58 3.15 3.64 4.16 4.80 5.76 8.14 86 90 93
90
90093 2.362 4.10 5.80 7.10 8.20 9.35 10.80 12.96 18.33 86 90 93
90118 2.997 6.60 9.33 11.43 13.19 15.05 17.39 20.86 29.50 86 90 93
90125 3.175 7.40 10.47 12.82 14.81 16.89 19.51 23.41 33.11 86 90 93
90156 3.962 11.53 16.31 19.97 23.06 26.31 30.39 36.46 51.56 86 90 93

Fan & Needle Jet
Disc Nozzles
Series DS Fan and Needle Jet Disc Nozzle
The DS fan and needle jet disc nozzle is designed to
replace discs in showers manufactured by Sinclair. Fan and Needle Jet Disc
Construction
All DS series nozzles are constructed of 316SS. The
nozzles are designed for use in systems that operate
up to 300 psig.
0.125" 0.125"
0.620" 0.620"
Fan Disc Jet Disc
Fan/Jet Disc Ordering Information Construction Material Code

316SS S
DS S 000040
Nozzle
Series Fan/Orifice
Number
Construction
Material

Series DS Fan and Needle Jet
Disc Nozzle
Fan Angle Equivalent Pressure (PSI)
Fan/Orifice
(degree) at 40 Orifice Diameter
Number
psi (inch) 20 40 60 80 100 150 200 300
000028 0.028 0.064 0.090 0.110 0.128 0.143 0.175 0.202 0.247
000033 0.033 0.089 0.125 0.153 0.177 0.198 0.243 0.280 0.343
000040 0.040 0.130 0.184 0.225 0.260 0.291 0.356 0.412 0.504
000055 0.055 0.246 0.348 0.426 0.492 0.550 0.674 0.778 0.953
Jet 000070 0.070 0.399 0.564 0.690 0.797 0.891 1.092 1.261 1.544
000093 0.093 0.719 1.017 1.245 1.438 1.607 1.968 2.273 2.784
000125 0.125 1.271 1.798 2.202 2.542 2.842 3.481 4.019 4.923
000156 0.156 1.980 2.800 3.429 3.959 4.427 5.422 6.260 7.667
000187 0.187 2.875 4.066 4.980 5.750 6.429 7.874 9.092 11.135
015040 0.040 0.157 0.222 0.271 0.313 0.350 0.429 0.496 0.607
015055 0.055 0.296 0.419 0.513 0.593 0.662 0.811 0.937 1.147
015070 0.070 0.480 0.679 0.831 0.960 1.073 1.314 1.518 1.859
15 015093 0.093 0.865 1.224 1.499 1.731 1.935 2.370 2.737 3.352
015125 0.125 1.530 2.164 2.651 3.061 3.422 4.191 4.839 5.927
015156 0.156 2.383 3.371 4.128 4.767 5.330 6.527 7.537 9.231
015187 0.187 3.496 4.960 6.084 7.032 7.866 9.643 11.141 13.654
030028 0.028 0.078 0.111 0.136 0.157 0.175 0.215 0.248 0.304
030033 0.033 0.109 0.154 0.189 0.218 0.244 0.298 0.345 0.422
030040 0.040 0.160 0.226 0.277 0.320 0.358 0.438 0.506 0.620
030055 0.055 0.303 0.428 0.524 0.605 0.677 0.829 0.957 1.172
30 030070 0.070 0.490 0.693 0.849 0.980 1.096 1.342 1.550 1.899
030093 0.093 0.884 1.250 1.531 1.768 1.977 2.421 2.795 3.424
030125 0.125 1.563 2.211 2.707 3.126 3.495 4.281 4.943 6.054
030156 0.156 2.435 3.443 4.217 4.869 5.444 6.667 7.699 9.429
030187 0.187 3.536 5.000 6.124 7.072 7.906 9.683 11.181 13.694
045028 0.028 0.080 0.114 0.139 0.161 0.180 0.220 0.254 0.311
045033 0.033 0.112 0.158 0.193 0.223 0.250 0.306 0.353 0.432
045040 0.040 0.164 0.232 0.284 0.328 0.367 0.449 0.519 0.635
045055 0.055 0.310 0.439 0.537 0.620 0.693 0.849 0.981 1.201
45 045070 0.070 0.502 0.710 0.870 1.005 1.123 1.375 1.588 1.945
045093 0.093 0.906 1.281 1.569 1.811 2.025 2.480 2.864 3.508
045125 0.125 1.602 2.265 2.774 3.203 3.581 4.386 5.065 6.203
045156 0.156 2.494 3.528 4.321 4.989 5.578 6.831 7.888 9.661
045187 0.187 3.623 5.123 6.275 7.246 8.101 9.921 11.456 14.031
060028 0.028 0.083 0.117 0.143 0.165 0.185 0.226 0.261 0.320
060033 0.033 0.115 0.162 0.199 0.229 0.256 0.314 0.363 0.444
60 060040 0.040 0.169 0.238 0.292 0.337 0.377 0.461 0.533 0.653
060055 0.055 0.319 0.451 0.552 0.637 0.712 0.872 1.007 1.234
060070 0.070 0.516 0.730 0.894 1.032 1.154 1.413 1.632 1.999

Disc Nozzle
Equivalent Pressure (PSI)
Fan Angle Fan/Orifice
Orifice Diameter
(degree) at 40 psi Number
(inch) 20 40 60 80 100 150 200 300
060093 0.093 0.931 1.316 1.612 1.861 2.081 2.549 2.943 3.604
060125 0.125 1.646 2.327 2.850 3.291 3.680 4.507 5.204 6.373
60
060156 0.156 2.563 3.625 4.439 5.126 5.731 7.019 8.105 9.927
060187 0.187 3.842 5.434 6.655 7.685 8.592 10.523 12.151 14.882
080028 0.028 0.088 0.125 0.153 0.177 0.198 0.242 0.280 0.342
080033 0.033 0.124 0.175 0.214 0.247 0.277 0.339 0.391 0.479
080040 0.040 0.177 0.250 0.306 0.354 0.395 0.484 0.559 0.685
080055 0.055 0.318 0.450 0.551 0.636 0.712 0.871 1.006 1.232
80 080070 0.070 0.396 0.560 0.686 0.792 0.885 1.084 1.252 1.534
080093 0.093 1.061 1.500 1.837 2.121 2.372 2.905 3.354 4.108
080125 0.125 1.768 2.500 3.062 3.536 3.953 4.841 5.590 6.847
080156 0.156 2.828 4.000 4.899 5.657 6.325 7.746 8.944 10.954
080187 0.187 4.243 6.000 7.348 8.485 9.487 11.619 13.416 16.432

Disc Nozzle

Equivalent
(degree) at Fan/Orifice
Orifice Diameter 100 200 300 400 500 1000 1500 2000
275 kPa Number
(mm)
(2.75 Bar) 1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00
000028 0.711 0.21 0.29 0.36 0.41 0.46 0.65 0.80 0.92
000033 0.838 0.29 0.40 0.49 0.57 0.64 0.90 1.11 1.28
000040 1.016 0.42 0.59 0.73 0.84 0.94 1.33 1.62 1.88
000055 1.397 0.79 1.12 1.37 1.59 1.77 2.51 3.07 3.55
Jet 000070 1.780 1.28 1.82 2.23 2.57 2.87 4.06 4.98 5.75
000093 2.360 2.32 3.28 4.01 4.63 5.18 7.33 8.97 10.36
000125 3.180 4.10 5.79 7.10 8.19 9.16 13.00 15.87 18.32
000156 3.960 6.38 9.02 11.10 12.80 14.30 20.20 24.71 28.54
000187 4.750 9.27 13.10 16.10 18.50 20.70 29.30 35.89 41.45
015040 1.016 0.51 0.71 0.87 1.01 1.13 1.60 1.96 2.26
015055 1.397 0.95 1.35 1.65 1.91 2.14 3.02 3.70 4.27
015070 1.778 1.55 2.19 2.68 3.09 3.46 4.89 5.99 6.92
15 015093 2.362 2.79 3.94 4.83 5.58 6.24 8.82 10.80 12.47
015125 3.180 4.93 6.98 8.54 9.87 11.00 15.60 19.10 22.06
015156 3.962 7.68 10.90 13.30 15.40 17.20 24.30 29.75 34.36
015187 4.750 11.29 15.99 19.59 22.69 25.39 35.89 44.03 50.86
030028 0.711 0.25 0.36 0.44 0.51 0.57 0.80 0.98 1.13
030033 0.838 0.35 0.50 0.61 0.70 0.79 1.11 1.36 1.57
030040 1.016 0.52 0.73 0.89 1.03 1.15 1.63 2.00 2.31
030055 1.397 0.98 1.38 1.69 1.95 2.18 3.08 3.78 4.36
30 030070 1.780 1.58 2.23 2.74 3.16 3.53 5.00 6.12 7.07
030093 2.360 2.85 4.03 4.94 5.70 6.37 9.01 11.04 12.74
030125 3.180 5.04 7.13 8.73 10.10 11.30 15.90 19.51 22.53
030156 3.960 7.85 11.10 13.60 15.70 17.50 24.80 30.39 35.09
030187 4.750 11.40 16.10 19.70 22.80 25.50 36.00 44.14 50.97
045028 0.711 0.26 0.37 0.45 0.52 0.58 0.82 1.00 1.16
045033 0.838 0.36 0.51 0.62 0.72 0.80 1.14 1.39 1.61
045040 1.016 0.53 0.75 0.92 1.06 1.18 1.67 2.05 2.36
045055 1.397 1.00 1.41 1.73 2.00 2.23 3.16 3.87 4.47
45 045070 1.780 1.62 2.29 2.80 3.24 3.62 5.12 6.27 7.24
045093 2.360 2.92 4.13 5.06 5.84 6.53 9.23 11.31 13.06
045125 3.180 5.16 7.30 8.94 10.30 11.50 16.30 19.99 23.09
045156 3.960 8.04 11.40 13.90 16.10 18.00 25.40 31.14 35.96
045187 4.750 11.70 16.50 20.20 23.40 26.10 36.90 45.23 52.22
060028 0.711 0.27 0.38 0.46 0.53 0.60 0.84 1.03 1.19
060033 0.840 0.37 0.52 0.64 0.74 0.83 1.17 1.43 1.65
60 060040 1.016 0.54 0.77 0.94 1.09 1.21 1.72 2.10 2.43
060055 1.397 1.03 1.45 1.78 2.05 2.30 3.25 3.98 4.59
060070 1.780 1.66 2.35 2.88 3.33 3.53 5.26 6.44 7.44

Disc Nozzle

Equivalent
(degree) at Fan/Orifice
Orifice Diameter 100 200 300 400 500 1000 1500 2000
275 kPa Number
(mm)
(2.75 Bar) 1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00
060093 2.360 3.00 4.24 5.20 6.00 6.71 9.49 11.62 13.41
060125 3.180 5.30 7.50 9.19 10.60 11.90 16.80 20.50 23.70
60
060156 3.960 8.26 11.70 14.30 16.50 18.50 26.10 32.00 36.95
060187 4.750 12.38 17.51 21.45 24.77 27.69 39.16 47.96 55.38
080028 0.711 0.28 0.40 0.49 0.57 0.64 0.90 1.10 1.27
080033 0.838 0.40 0.56 0.69 0.80 0.89 1.26 1.54 1.78
080040 1.016 0.57 0.81 0.99 1.14 1.27 1.80 2.21 2.55
080055 1.397 1.03 1.45 1.78 2.05 2.29 3.24 3.97 4.59
80 080070 1.778 1.60 2.26 2.76 3.19 3.57 5.04 6.18 7.13
080093 2.362 3.42 4.83 5.92 6.84 7.64 10.81 13.24 15.29
080125 2.173 5.70 8.06 9.87 11.39 12.74 18.02 22.07 25.48
080156 2.173 9.12 12.89 15.79 18.23 20.38 28.83 35.30 40.77
080187 2.173 4.23 19.34 23.68 27.35 30.57 43.24 52.96 61.15

Self Purging Nozzles
PP
PN
PT
Products
u Series PN Self Purging Nozzle............................................................................ 71
u Series PT Two Self Purging Nozzle..................................................................... 74
u Series PP Self Purging Nozzle............................................................................ 77
70 Go to Main TOC
Series PN Self Purging Nozzle
The PN series self purging nozzle is available in a jet,
fan, or a double fan configuration that sprays two fan Double Fan Shower Nozzle Body (L)
patterns in opposite directions (180° apart). During Standard Fan Shower Nozzle Body (R)
normal shower operation, water pressure holds a spring
loaded piston firmly against the shower button. Nozzle Piston
cleaning is easily accomplished by lowering the shower (See table for part number)
water pressure below 10 psig (20 psig using spring S4-
347). The nozzle orifice opens up allowing shower water Spring
to flush contaminants from the pipe. During the flushing N6715 – 10 psig purge *
S4-347 – 20 psig purge
operation, nozzle flow rates are 3.3 gpm with the
B41058 – 30 psig purge
standard spring (N6715). * Standard on all complete nozzles.
Diaphragm
Rebuild Service – Kadant Solutions Division can build
B39978 (N6845) - Viton**
any PN series nozzle. Please contact a Kadant Solutions ** Standard supply
Division customer service representative for details.
Construction
Check Nut
All PN series nozzles are constructed of 316SS. ArresTech
S4-997 (N6759) – 1.125”-20
coating is offered on the spray button and piston only.
O-Ring
The nozzles are designed for use in systems that operate
1158-121-001 (Buna-N)
up to 200 psig. Higher operation pressures are available.
Nozzle Base
316SS – 1.125”-20
C27686GP1 – 2”, 2-1/2”, 3”
C27686GP2 – 4”, 6”
C27686GP3 – 1-1/2”
1 Spray Button 6 6
2 Shower Nozzle Body
3 Check Nut 5 5
4 Spring 4 4
5 High-Pressure Piston 7 7
6 Diaphragm 3 3
7 O-Ring
2
Deflection Deflection
Deflection
A° A°
A°
1
1
2 Double Fan Nozzle Single Fan/Jet Nozzle
Self Purging Nozzle Ordering Information Construction Material Code Connection Size/Type Code
ArresTech Plated 316SS*** A 1.125” – 20 18U
PN 18U S V 040090 H 316SS S M2X1.5 (C40306G) M28
Nozzle ***ArresTech plating on spray button
Series and piston only. Spring Type Code
Diaphragm Spring Type
Connection 10 psig None
Material
Construction Orifice Diaphragm Material Code 20 psig H
Material Number Viton V 30 psig XH
Go to Self Purging Nozzles Tab 71


Pressure (PSI) Piston Part Number
Equivalent Deflection Arrestech
Fan Angle Fan/Orifice 316
Orifice Angle Plated 316
(degree)* Number 30 40 60 80 100 125 150 200 Stainless
(inch) (degree) Stainless
Steel
Steel
000023 0.023 8.5 0.055 0.063 0.077 0.089 0.100 0.112 0.122 0.141 N6803 N6803A
000037 0.037 8.5 0.141 0.163 0.200 0.231 0.258 0.289 0.316 0.365 N6803 N6803A
000040 0.040 8.5 0.160 0.190 0.240 0.270 0.300 0.340 0.370 0.420 N6803 N6803A
Jet
000047 0.047 8.5 0.228 0.264 0.323 0.373 0.417 0.466 0.510 0.589 N6803 N6803A
000087 0.087 8.5 0.790 0.850 1.030 1.200 1.360 1.520 1.670 1.980 N6803 N6803A
000099 0.099 8.5 1.013 1.169 1.432 1.654 1.849 2.067 2.265 2.615 N6617 N6617A
015040 0.040 12 0.195 0.225 0.275 0.318 0.356 0.398 0.436 0.503 N6749 N6749A
15
015066 0.066 12 0.526 0.607 0.744 0.859 0.961 1.074 1.176 1.358 N6749 N6749A
25 025085 0.085 12 0.880 1.020 1.240 1.420 1.600 1.790 1.960 2.260 N6617 N6617A
030063 0.063 12 0.479 0.554 0.678 0.783 0.875 0.978 1.072 1.238 N6749 N6749A
30 030095 0.095 12 1.110 1.270 1.540 1.780 2.010 2.250 2.460 2.830 N6617 N6617A
030099 0.099 12 1.210 1.400 1.720 1.990 2.240 2.500 2.740 3.110 N6617 N6617A
040090 0.090 12 1.030 1.170 1.430 1.650 1.870 2.090 2.290 2.690 N6617 N6617A
040093 0.093 12 1.110 1.270 1.540 1.780 1.990 2.220 2.440 2.820 N6617 N6617A
40 040097 0.097 12 1.190 1.360 1.670 1.930 2.170 2.430 2.660 3.110 N6617 N6617A
040114 0.114 12 1.670 1.920 2.360 2.720 3.030 3.390 3.710 4.240 N6617 N6617A
040147 0.147 12 2.730 3.190 3.890 4.490 5.010 5.600 6.140 7.070 N6617 N6617A
045104 0.104 12 1.360 1.570 1.930 2.240 2.510 2.810 3.070 3.540 N6617 N6617A
045131 0.131 12 2.120 2.470 3.010 3.520 3.960 4.430 4.850 5.660 N6617 N6617A
45
045166 0.166 12 3.480 4.170 4.920 5.680 6.350 7.100 7.780 8.980 N6617 N6617A
045182 0.182 12 4.170 4.800 5.870 6.790 7.590 8.490 9.300 10.740 N6617 N6617A
50 050145 0.145 12 2.790 3.230 3.910 4.540 5.080 5.680 6.220 7.210 N6617 N6617A
060104 0.104 12 1.410 1.610 1.980 2.300 2.570 2.870 3.150 3.640 N6617 N6617A
60 060145 0.145 12 2.710 3.100 3.750 4.380 4.890 5.470 5.990 6.930 N6617 N6617A
060161 0.161 12 3.270 3.840 4.710 5.460 6.130 6.850 7.510 8.630 N6617 N6617A
080083 0.083 12 1.001 1.156 1.416 1.635 1.828 2.044 2.239 2.586 N6617 N6617A
080107 0.107 5 1.690 1.910 2.340 2.730 3.040 3.390 3.720 4.240 N6617 N6617A
080131 0.131 12 2.550 2.970 3.540 4.120 4.550 5.100 5.590 6.500 N6617 N6617A
80
080145 0.145 12 3.110 3.560 4.410 5.100 5.530 6.180 6.770 7.920 N6617 N6617A
080168 0.168 12 4.050 4.700 5.780 6.670 7.460 8.340 9.140 10.550 N6617 N6617A
080194 0.194 12 5.471 6.317 7.737 8.934 9.989 11.168 12.233 14.126 N6617 N6617A
100080 0.080 12 0.960 1.140 1.410 1.610 1.820 2.030 2.230 2.550 N6617 N6617A
100 100098 0.098 12 1.479 1.708 2.092 2.416 2.701 3.020 3.308 3.820 N6617 N6617A
100119 0.119 12 2.181 2.519 3.085 3.562 3.983 4.453 4.878 5.632 N6617 N6617A
120063 0.063 15 0.747 0.862 1.056 1.219 1.363 1.524 1.670 1.928 N6617 N6617A
120
120125 0.125 12 2.960 3.420 4.110 4.800 5.310 5.940 6.500 7.490 N6617 N6617A
130091 0.091 12 1.410 1.600 1.950 2.300 2.530 2.830 3.100 3.540 N6617 N6617A
130
130147 0.147 12 3.675 4.244 5.198 6.002 6.710 7.502 8.218 9.489 N6617 N6617A
Double 40 D040114 0.114 12 3.310 3.830 4.690 5.410 6.050 6.760 7.410 8.560 N6617 N6617A
D080107 0.107 5 3.329 3.844 4.707 5.436 6.077 6.794 7.443 8.594 N6617 N6617A
Double 80 D080131 0.131 12 6.020 6.960 8.520 9.840 11.050 12.360 13.540 15.560 N7347 N7347A
D080145 0.145 12 6.220 7.120 8.820 10.200 11.060 12.360 13.540 15.840 N6617 N6617A
*Minimum spray angle changes with pressure variations.
72 Go to Self Purging Nozzles Tab


Pressure kPa (Bars) Piston Part Number
Equivalent Deflection Arrestech
Fan Angle Fan/Orifice 200 300 400 600 800 1000 1200 1400 316
Orifice Angle Plated 316
(degree)* Number Stainless
(mm) (degree) Stainless
2.00 3.00 4.00 6.00 8.00 10.00 12.00 14.00 Steel
Steel
000023 0.58 8.5 0.203 0.249 0.287 0.352 0.406 0.454 0.497 0.537 N6803 N6803A
000037 0.94 8.5 0.527 0.645 0.745 0.912 1.054 1.178 1.290 1.394 N6803 N6803A
000040 1.02 8.5 0.596 0.750 0.893 1.079 1.240 1.377 1.495 1.602 N6803 N6803A
Jet
000047 1.19 8.5 0.844 1.034 1.194 1.462 1.689 1.888 2.068 2.234 N6803 N6803A
000087 2.21 8.5 2.940 3.356 3.834 4.727 5.543 6.216 6.983 7.551 N6803 N6803A
000099 2.51 8.5 3.756 4.600 5.312 6.506 7.512 8.399 9.200 9.938 N6617 N6617A
015040 1.02 8.5 0.725 0.888 1.025 1.256 1.450 1.621 1.776 1.918 N6749 N6749A
15
015066 1.68 12 1.967 2.409 2.781 3.406 3.933 4.398 4.817 5.203 N6749 N6749A
25 025085 2.16 12 3.275 4.027 4.615 5.657 6.528 7.295 8.002 8.619 N6617 N6617A
030063 1.60 12 1.784 2.185 2.523 3.090 3.568 3.989 4.369 4.720 N6749 N6749A
30 030095 2.41 12 4.131 5.014 5.732 7.034 8.205 9.156 10.003 10.793 N6617 N6617A
030099 2.51 12 4.503 5.527 6.402 7.853 9.117 10.198 11.286 11.861 N6617 N6617A
040090 2.29 12 3.834 4.619 5.322 6.625 7.622 8.523 9.474 10.259 N6617 N6617A
040093 2.36 12 4.131 5.014 5.732 7.034 8.096 9.081 10.003 10.805 N6617 N6617A
40 040097 2.46 12 4.429 5.369 6.216 7.630 8.861 9.900 10.984 11.861 N6617 N6617A
040114 2.90 12 6.216 7.580 8.784 10.719 12.362 13.808 14.948 16.171 N6617 N6617A
040147 3.73 12 10.161 12.593 14.478 17.716 20.422 22.852 24.951 26.964 N6617 N6617A
045104 2.64 12 5.062 6.198 7.183 8.858 10.247 11.426 12.456 13.501 N6617 N6617A
045131 3.33 12 7.890 9.751 11.203 13.883 16.155 18.051 19.968 21.586 N6617 N6617A
45
045166 4.22 12 12.952 16.462 18.312 22.406 25.892 28.956 31.707 34.248 N6617 N6617A
045182 4.62 12 15.520 18.949 21.848 26.798 30.960 34.614 37.918 40.956 N6617 N6617A
50 050145 3.68 12 10.384 12.751 14.553 17.940 20.713 23.150 25.479 27.498 N6617 N6617A
060104 2.64 12 5.248 6.356 7.369 10.942 10.466 11.724 12.834 13.882 N6617 N6617A
60 060145 3.68 12 10.086 12.238 13.957 17.307 19.947 22.294 24.460 26.430 N6617 N6617A
060161 4.09 12 12.171 15.159 17.530 21.550 24.980 27.951 30.424 32.913 N6617 N6617A
080083 2.11 12 3.734 4.573 5.281 6.467 7.468 8.349 9.146 9.879 N6617 N6617A
080107 2.72 5 6.290 7.540 8.709 10.756 12.362 13.845 14.948 16.171 N6617 N6617A
080131 3.33 12 9.491 11.725 13.176 16.116 18.598 20.805 22.950 24.790 N6617 N6617A
80
080145 3.68 12 11.575 14.054 16.414 20.135 22.537 25.197 27.970 30.205 N6617 N6617A
080168 4.27 12 15.074 18.554 21.513 26.351 30.413 34.018 37.256 40.236 N6617 N6617A
080194 4.93 12 15.292 18.729 21.626 26.486 30.584 34.193 37.457 40.458 N6617 N6617A
100080 2.03 12 3.573 4.500 5.248 6.364 7.403 8.300 8.984 9.725 N6617 N6617A
100 100098 2.49 12 5.510 6.749 7.793 9.544 11.021 12.322 13.498 14.579 N6617 N6617A
100119 3.02 12 8.106 9.928 11.463 14.040 16.212 18.125 19.855 21.446 N6617 N6617A
120063 1.60 15 2.778 3.403 3.929 4.812 5.557 6.213 6.806 7.351 N6617 N6617A
120
120125 3.18 12 11.017 13.501 15.297 18.944 21.661 24.192 26.461 28.565 N6617 N6617A
130091 2.31 12 5.248 6.316 7.258 9.081 10.320 11.538 12.456 13.501 N6617 N6617A
130
130147 3.73 12 13.652 16.721 19.307 23.646 27.304 30.527 33.441 36.120 N6617 N6617A
Double 40 D040114 2.90 12 12.431 15.159 17.567 21.438 24.725 27.616 29.896 32.341 N6617 N6617A
D080107 2.72 5 6.290 7.540 8.709 10.756 12.362 13.845 14.948 16.171 N6617 N6617A
Double 80 D080131 3.33 12 9.261 11.293 13.088 15.971 18.420 20.574 22.272 24.094 N7347 N7347A
D080145 5.44 15 23.150 28.107 32.827 40.271 45.073 50.394 55.941 60.411 N6617 N6617A

Series PT Two Self Purging Nozzle
The PT two series self purging nozzle is an improved
Double Fan Shower Nozzle Body (L)
version of the PN series nozzle. It’s available in a jet,
fan, or a double fan configuration that sprays two fan Standard Fan Shower Nozzle Body (R)
patterns in opposite directions (180° apart). During
normal shower operation, water pressure holds a spring
loaded piston firmly against the shower button. Nozzle Piston
cleaning is easily accomplished by lowering the shower B-28059 – Piston
water pressure below 20 psig. The nozzle orifice will open A-25941 – Seal, U-Cup (Nitroxile ELF)
up allowing shower water to flush contaminants from the
pipe. During the flushing operation, nozzle flow rates are Spring
3.13 gpm. A-25943
Rebuild Service – Kadant Solutions Division can build

any PN series nozzle. Please contact a Kadant Solutions Diaphragm
Division customer service representative for details. B39978 (N6845) – Viton*
* Standard supply
Construction Check Nut
All PT series nozzles are constructed of 316SS. ArresTech S4-997 (N6759) – 1.125”-20
coating is offered on the spray button and piston only.
The nozzles are designed for use in systems that operate
O-Ring-
up to 200 psig. Higher operation pressures are available.
1158-121-001 (Buna-N)
Nozzle Base
316SS – 1.125”-20
C27686GP1 – 2”, 2-12”, 3”
C27686GP2 – 4”, 6”
C27686GP3 – 1-1/2”
1 Spray Button 6 6
2 Shower Nozzle Body
8 8
3 Check Nut
4 5 4 5
4 Spring
5 High-Pressure Piston 7 7
6 Diaphragm 3
7 O-Ring 3
8 U-Cup Seal 2
Deflection Deflection Deflection

A° A° A°
1
1
2 Double Fan Nozzle Single Fan/Jet Nozzle
Self Purging Nozzle Ordering Information Construction Material Code Connection Size/Type Code
ArresTech Plated 316SS** A 1.125” – 20 18U
PT 18U S V 040090 316SS S
Nozzle **ArresTech plating on spray button
Series Fan/Orifice and piston only.
Diaphragm Number
Connection
Material
Construction Diaphragm Material Code
Material Viton V

Series PT Self Purging Nozzle

Deflection Pressure (PSI)
Fan Angle Fan/Orifice Equivalent
Angle
(degree)* Number Orifice (inch) 30 40 60 80 100 125 150 200
(degree)
000023 0.023 8.5 0.055 0.063 0.077 0.089 0.100 0.112 0.122 0.141
000037 0.037 8.5 0.141 0.163 0.200 0.231 0.258 0.289 0.316 0.365
000040 0.040 8.5 0.160 0.190 0.240 0.270 0.300 0.340 0.370 0.420
Jet
000047 0.047 8.5 0.228 0.264 0.323 0.373 0.417 0.466 0.510 0.589
000087 0.087 8.5 0.790 0.850 1.030 1.200 1.360 1.520 1.670 1.980
000099 0.099 8.5 1.013 1.169 1.432 1.654 1.849 2.067 2.265 2.615
015040 0.040 12 0.190 0.220 0.280 0.320 0.360 0.400 0.440 0.500
15
015066 0.066 12 0.526 0.607 0.744 0.859 0.961 1.074 1.176 1.358
25 025085 0.085 12 0.880 1.020 1.240 1.420 1.600 1.790 1.960 2.260
030063 0.063 12 0.479 0.554 0.678 0.783 0.875 0.978 1.072 1.238
30 030095 0.095 12 1.110 1.270 1.540 1.780 2.010 2.250 2.460 2.830
030099 0.099 12 1.210 1.400 1.720 1.990 2.240 2.500 2.740 3.110
040090 0.090 12 1.030 1.170 1.430 1.650 1.870 2.090 2.290 2.690
040093 0.093 12 1.110 1.270 1.540 1.780 1.990 2.220 2.440 2.620
40 040097 0.097 12 1.190 1.360 1.670 1.930 2.170 2.430 2.660 3.110
040114 0.114 12 1.670 1.920 2.360 2.720 3.030 3.390 3.710 4.240
040147 0.147 12 2.730 3.190 3.890 4.490 5.010 5.600 6.140 7.070
045104 0.104 12 1.360 1.570 1.930 2.240 2.510 2.810 3.070 3.540
045131 0.131 12 2.120 2.470 3.010 3.520 3.960 4.430 4.850 5.660
45
045166 0.166 12 3.480 4.170 4.920 5.680 6.350 7.100 7.780 8.980
045182 0.182 12 4.170 4.800 5.870 6.790 7.590 8.490 9.300 10.740
50 050145 0.145 12 2.790 3.230 3.910 4.540 5.080 5.680 6.220 7.210
060094 0.094 12 1.107 1.278 1.565 1.807 2.020 2.258 2.474 2.857
060104 0.104 12 1.410 1.610 1.980 2.300 2.570 2.870 3.150 3.640
60
060145 0.145 12 2.710 3.100 3.750 4.380 4.890 5.470 5.990 6.930
060161 0.161 12 3.270 3.840 4.710 5.460 6.130 6.850 7.510 8.630
080083 0.083 12 1.001 1.156 1.416 1.635 1.828 2.044 2.239 2.586
080107 0.107 5 1.690 1.910 2.340 2.730 3.040 3.390 3.720 4.240
080131 0.131 12 2.550 2.970 3.540 4.120 4.550 5.100 5.590 6.500
80
080145 0.145 12 3.110 3.560 4.410 5.100 5.530 6.180 6.770 7.920
080168 0.168 12 4.050 4.700 5.780 6.670 7.460 8.340 9.140 10.550
080194 0.194 12 5.471 6.317 7.737 8.934 9.989 11.168 12.233 14.126
100080 0.080 12 0.960 1.140 1.410 1.610 1.820 2.030 2.230 2.550
100 100098 0.098 12 1.479 1.708 2.092 2.416 2.701 3.020 3.308 3.820
100119 0.119 12 2.181 2.519 3.085 3.562 3.983 4.453 4.878 5.632
120063 0.063 15 0.747 0.862 1.056 1.219 1.363 1.524 1.670 1.928
120
120125 0.125 12 2.960 3.420 4.110 4.800 5.310 5.940 6.500 7.490
130091 0.091 12 1.410 1.600 1.950 2.300 2.530 2.830 3.100 3.540
130
130147 0.147 12 3.675 4.244 5.198 6.002 6.710 7.502 8.218 9.489
Double 40 D040114 0.114 12 3.310 3.830 4.690 5.410 6.050 6.760 7.410 8.560
D080107 0.107 5 3.329 3.844 4.707 5.436 6.077 6.794 7.443 8.594
Double 80 D080131 0.131 12 5.100 5.940 7.080 8.240 9.100 10.200 11.180 13.000
D080145 0.145 12 6.220 7.120 8.820 10.200 11.060 12.360 13.540 15.840

Series PT Self Purging Nozzle

Pressure kPa (Bars)
Deflection
Fan Angle Fan/Orifice Equivalent
Angle 200 300 400 600 800 1000 1200 1400
(degree)* Number Orifice (mm)
(degree)
2.00 3.00 4.00 6.00 8.00 10.00 12.00 14.00
000023 0.58 8.5 0.203 0.249 0.287 0.352 0.406 0.454 0.497 0.537
000037 0.94 8.5 0.527 0.645 0.745 0.912 1.054 1.178 1.290 1.394
000040 1.02 8.5 0.596 0.750 0.893 1.079 1.240 1.377 1.495 1.602
Jet
000047 1.19 8.5 0.844 1.034 1.194 1.462 1.689 1.888 2.068 2.234
000087 2.21 8.5 2.940 3.356 3.834 4.727 5.543 6.216 6.983 7.551
000099 2.51 8.5 3.756 4.600 5.312 6.506 7.512 8.399 9.200 9.938
015040 1.02 8.5 0.725 0.888 1.025 1.256 1.450 1.621 1.776 1.918
15
015066 1.68 12 1.967 2.409 2.781 3.406 3.933 4.398 4.817 5.203
25 025085 2.16 12 3.275 4.027 4.615 5.657 6.528 7.295 8.002 8.619
030063 1.60 12 1.784 2.185 2.523 3.090 3.568 3.989 4.369 4.720
30 030095 2.41 12 4.131 5.014 5.732 7.034 8.205 9.156 10.003 10.793
030099 2.51 12 4.503 5.527 6.402 7.853 9.117 10.198 11.286 11.861
040090 2.29 12 3.834 4.619 5.322 6.625 7.622 8.523 9.474 10.259
040093 2.36 12 4.131 5.014 5.732 7.034 8.096 9.081 10.003 10.805
40 040097 2.46 12 4.429 5.369 6.216 7.630 8.861 9.900 10.984 11.861
040114 2.90 12 6.216 7.580 8.784 10.719 12.362 13.808 14.948 16.171
040147 3.73 12 10.161 12.593 14.478 17.716 20.422 22.852 24.951 26.964
045104 2.64 12 5.062 6.198 7.183 8.858 10.247 11.426 12.456 13.501
045131 3.33 12 7.890 9.751 11.203 13.883 16.155 18.051 19.968 21.586
45
045166 4.22 12 12.952 16.462 18.312 22.406 25.892 28.956 31.707 34.248
045182 4.62 12 15.520 18.949 21.848 26.798 30.960 34.614 37.918 40.956
50 050145 3.68 12 10.384 12.751 14.553 17.940 20.713 23.150 25.479 27.498
060094 2.39 12 4.1172 5.0426 5.8226 7.1313 8.2345 9.20641 10.0851 10.8932
060104 2.64 12 5.248 6.356 7.369 10.942 10.466 11.724 12.834 13.882
60
060145 3.68 12 10.086 12.238 13.957 17.307 19.947 22.294 24.460 26.430
060161 4.09 12 12.171 15.159 17.530 21.550 24.980 27.951 30.424 32.913
080083 2.11 12 3.734 4.573 5.281 6.467 7.468 8.349 9.146 9.879
080107 2.72 5 6.290 7.540 8.709 10.756 12.362 13.845 14.948 16.171
080131 3.33 12 9.491 11.725 13.176 16.116 18.598 20.805 22.950 24.790
80
080145 3.68 12 11.575 14.054 16.414 20.135 22.537 25.197 27.970 30.205
080168 4.27 12 15.074 18.554 21.513 26.351 30.413 34.018 37.256 40.236
080194 4.93 12 15.292 18.729 21.626 26.486 30.584 34.193 37.457 40.458
100080 2.03 12 3.573 4.500 5.248 6.364 7.403 8.300 8.984 9.725
100 100098 2.49 12 5.510 6.749 7.793 9.544 11.021 12.322 13.498 14.579
100119 3.02 12 8.106 9.928 11.463 14.040 16.212 18.125 19.855 21.446
120063 1.60 15 2.778 3.403 3.929 4.812 5.557 6.213 6.806 7.351
120
120125 3.18 12 11.017 13.501 15.297 18.944 21.661 24.192 26.461 28.565
130091 2.31 12 5.248 6.316 7.258 9.081 10.320 11.538 12.456 13.501
130
130147 3.73 12 13.652 16.721 19.307 23.646 27.304 30.527 33.441 36.120
Double 40 D040114 2.90 12 12.431 15.159 17.567 21.438 24.725 27.616 29.896 32.341
D080107 2.72 5 6.290 7.540 8.709 10.756 12.362 13.845 14.948 16.171
Double 80 D080131 3.33 12 18.982 23.449 26.351 32.232 37.196 41.611 45.900 49.580
D080145 5.44 12 23.150 28.107 32.827 40.271 45.073 50.394 55.941 60.411

Series PP Self Purging Nozzle

The PP series self purging nozzle is available in fan or jet
spray patterns. It’s designed to allow the shower to purge Screws (3)
contaminants from the nozzle orifice if it should become 42-205-001
plugged. In operation, the shower pressure holds the
Lacing Wire
piston against an anvil designed to produce the desired
42-206-001
spray pattern. When purging is required, an air signal
is applied to the double piston on the side opposite the
water. The piston is forced away from the anvil allowing Washer, Flange
water pressure to clean the orifice. When the air signal 42-102-002
is removed, the water pressure again forces the piston
Hood Assembly (Jet or Fan)
against the anvil for normal operation. Piston return is
Includes nozzle hood and fan insert
assisted by a Posi-Lift spring.
Piston, Double
Construction (see table)
All PP series nozzles are constructed of stainless steel. The Seal, Piston
piston and hood assembly are available with ArresTech 42-103-001
plating as an option. The jet and fan nozzles are designed Seal, Lip Upper
for use in systems that operate up to 1000 and 300 psig 42-112-001
respectively. Seal, Lip Lower
42-113-001
Spring, Posi-Lift
B-24867
Base**
Contact Factory
** Welded to shower — not normally
replaced.
2 1
A° 1 Nozzle Hood
Deflection 2 Fan Nozzle Insert
Self Purging Nozzle Ordering Information Construction Material Code

ArresTech Plated 316SS *** A
PP A 000040 316SS S
Nozzle ***ArresTech plating on spray button
Series Fan/Orifice and piston only.
Number
Construction
Material


Fan Equiv. Insert and Deflection Pressure (PSI)
Nozzle
Angle Orifice Hood Piston Angle
Number 20 40 60 80 100 120 140 160 180 200 250 300 400 500 600 700
(degree)* (inch) Assembly (degree)
000040 0.040 B10738 42-107-001 26 0.15 0.23 0.28 0.32 0.36 0.39 0.42 0.45 0.48 0.50 0.56 0.59 0.68 0.75 0.86 0.95
Jet
000055 0.055 B10955 42-108-001 26 0.25 0.35 0.43 0.49 0.55 0.60 0.65 0.70 0.74 0.78 0.87 0.95 1.10 1.23 1.35 1.46
015040 0.040 B26144 42-108-001 22 0.16 0.22 0.27 0.32 0.35 0.39 0.42 0.45 0.47 0.50 0.56 0.61
15
015043 0.043 B22710 42-108-001 22.5 0.18 0.26 0.32 0.37 0.41 0.45 0.49 0.52 0.55 0.58 0.66 0.73
030094 0.094 B10747 42-108-001 36 0.85 1.22 1.51 1.76 1.97 2.17 2.35 2.52 2.68 2.83 3.19 3.51
30 030133 0.133 B10753 42-108-001 24 1.77 2.50 3.06 3.54 3.95 4.33 4.68 5.00 5.30 5.59 6.25 6.85
030157 0.157 B10754 42-108-001 24 2.47 3.50 4.29 4.95 5.53 6.06 6.55 7.00 7.42 7.83 8.75 9.59
40 040094 0.094 B10739 42-108-001 34 0.85 1.20 1.47 1.70 1.90 2.09 2.26 2.41 2.56 2.70 3.02 3.31
045050 0.050 B10748 42-108-001 24 0.27 0.40 0.50 0.58 0.66 0.72 0.79 0.85 0.90 0.96 1.08 1.19
045060 0.060 B24734 42-108-001 16 0.37 0.52 0.64 0.73 0.82 0.90 0.97 1.04 1.10 1.16 1.30 1.42
045109 0.109 B10746 42-108-001 38 1.03 1.44 1.76 2.02 2.26 2.47 2.66 2.84 3.01 3.17 3.54 3.86
45
045125 0.125 B10742 42-108-001 36 1.40 2.02 2.50 2.91 3.27 3.61 3.91 4.20 1.47 4.73 5.32 5.86
045131 0.131 B10755 42-108-001 24 1.77 2.50 3.06 3.54 3.95 4.33 4.68 5.00 5.30 5.59 6.25 6.85
045155 0.155 B10756 42-108-001 24 2.47 3.50 4.29 4.95 5.53 6.06 6.55 7.00 7.42 7.83 8.75 9.59
060056 0.056 B10750 42-108-001 15 0.34 0.48 0.58 0.67 0.75 0.82 0.89 0.95 1.01 1.06 1.19 1.30
060080 0.080 B10743 42-108-001 20 0.72 1.00 1.22 1.39 1.55 1.68 1.81 1.93 2.04 2.14 2.38 2.59
60
060098 0.098 B18630 42-108-001 15 1.01 1.42 1.74 2.01 2.25 2.46 2.66 2.84 3.02 3.18 3.55 3.89
060109 0.109 B10757 42-108-001 15 1.35 1.90 2.25 2.60 2.93 3.20 3.45 3.70 3.90 4.10 4.56 5.00
77 077070 0.070 B10758 42-108-001 20 0.80 0.95 1.16 1.30 1.42 1.56 1.68 1.80 1.91 2.01 2.25 2.46
090062 0.062 B31608 42-108-001 14 0.53 0.72 0.88 1.01 1.13 1.24 1.33 1.41 1.50 1.58 1.76 1.93
90 090078 0.078 B10744 42-108-001 13 0.87 1.21 1.46 1.67 1.86 2.02 2.18 2.32 2.45 2.58 2.86 3.12
090099 0.099 B25741 42-108-001 24 1.24 1.75 2.14 2.47 2.76 3.03 3.27 3.50 3.71 3.91 4.37 4.79
100078 0.078 B10740 42-108-001 14 1.00 1.41 1.72 2.00 2.21 2.40 2.61 2.80 2.95 3.10 3.47 3.80
100
100099 0.099 B24546 42-108-001 14 1.24 1.75 2.14 2.47 2.76 3.03 3.27 3.50 3.71 3.91 4.37 4.79
120 120080 0.080 B10745 42-108-001 4 1.02 1.41 1.71 1.96 2.17 2.37 2.54 2.71 2.86 3.00 3.34 3.64
Flow at Purge 4.00 5.44 6.50 7.40 8.17 8.86 9.49 10.08 N/R N/R N/R N/R

Insert Pressure kPa (Bar)

Fan Equiv. Deflection
Nozzle and
Angle Orifice Piston Angle 100 200 300 400 500 600 700 800 900 1000 1500 2000 2500 3000 3500 4000 5000
Number Hood
(degree)* (mm) (degree)
Assembly 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00 15.00 20.00 25.00 30.00 35.00 40.00 50.00
000040 1.016 B10738 42-107-001 26 0.48 0.74 0.91 1.04 1.14 1.27 1.37 1.44 1.53 1.61 1.97 2.20 2.46 2.68 2.86 3.20 3.66
Jet
000055 1.397 B10955 42-107-001 26 0.79 1.12 1.37 1.59 1.77 1.94 2.10 2.24 2.38 2.51 3.07 3.55 3.97 4.34 4.69 5.02 5.61
015040 1.016 B26144 42-108-001 22 0.51 0.72 0.88 1.02 1.14 1.25 1.35 1.44 1.53 1.61 1.97 2.28 2.55
15
015043 1.092 B22710 42-108-001 22.5 0.58 0.84 1.03 1.19 1.33 1.46 1.56 1.67 1.79 1.89 2.29 2.72 3.04
030094 2.388 B10747 42-108-001 36 2.74 3.93 4.82 5.62 6.34 6.96 7.51 8.06 8.59 9.08 11.2 13.1 14.6
30 030133 3.378 B10753 42-108-001 24 5.70 8.06 9.87 11.4 12.7 14.0 15.1 16.1 17.1 18.0 22.1 25.5 28.5
030157 3.988 B10754 42-108-001 24 7.98 11.3 13.8 16.0 17.8 19.5 21.1 22.6 23.9 25.2 30.9 35.7 39.9
40 040094 2.388 B10739 42-108-001 34 2.75 3.88 4.76 5.47 6.14 6.73 7.26 7.77 8.26 8.68 10.7 12.3 13.8
045050 1.270 B10748 42-108-001 24 0.87 1.29 1.58 1.86 2.09 2.33 2.51 2.69 2.89 3.06 3.79 4.43 4.95
045060 1.524 B24734 42-108-001 16 1.18 1.67 2.05 2.37 2.65 2.90 3.13 3.35 3.55 3.75 4.59 5.30 5.92
045109 2.769 B10746 42-108-001 38 3.32 4.64 5.68 6.55 7.27 7.97 8.60 9.20 9.72 10.2 12.5 14.4 16.1
45
045125 3.175 B10742 42-108-001 36 4.51 6.51 7.97 9.30 10.5 11.5 12.5 13.4 14.3 15.1 18.7 21.8 24.4
045131 3.327 B10755 42-108-001 24 5.70 8.06 9.87 11.4 12.7 14.0 15.1 16.1 17.1 18.0 22.1 25.5 28.5
045155 3.937 B10756 42-108-001 24 7.98 11.3 13.8 16.0 17.8 19.5 21.1 22.6 23.9 25.2 30.9 35.7 39.9
060056 1.422 B10750 42-108-001 15 1.08 1.53 1.88 2.17 2.42 2.66 2.87 3.07 3.25 3.43 4.20 4.85 5.42
060080 2.032 B10743 42-108-001 20 2.32 3.22 3.95 4.54 5.01 5.47 5.91 6.25 6.62 6.96 8.45 9.64 10.8
60
060098 2.489 B18630 42-108-001 15 3.24 4.58 5.61 6.48 7.24 7.94 8.57 9.16 9.72 10.2 12.5 14.5 16.2
060109 2.769 B10757 42-108-001 15 4.35 6.12 7.50 8.37 9.37 10.3 11.2 11.9 12.6 13.3 16.2 18.6 20.8
77 077070 1.778 B10758 42-108-001 20 2.58 3.06 3.75 4.32 4.68 5.01 5.42 5.79 6.14 6.47 7.93 9.15 10.2
090062 1.575 B31608 42-108-001 14 1.71 2.42 2.84 3.27 3.64 3.99 4.31 4.61 4.86 5.12 6.24 7.18 8.03
90 090078 1.981 B10744 42-108-001 13 2.80 3.90 4.78 5.43 6.02 6.57 7.09 7.52 7.97 8.36 10.2 11.6 13.0
090099 2.515 B25741 42-108-001 24 3.98 5.63 6.90 7.97 8.91 9.76 10.5 11.3 12.0 12.6 15.4 17.8 19.9
100078 1.981 B10740 42-108-001 14 3.22 4.54 5.57 6.40 7.21 7.80 8.43 8.93 9.54 10.1 12.2 14.1 15.8
100
100099 2.515 B24546 42-108-001 14 3.98 5.63 6.90 7.97 8.91 9.76 10.5 11.3 12.0 12.6 15.4 17.8 19.9
120 120080 2.032 B10745 42-108-001 4 3.29 4.54 5.57 6.36 7.06 7.65 8.26 8.83 9.28 9.77 11.8 13.5 15.1
Flow at Purge 12.90 17.50 21.50 24.20 26.70 28.80 31.20 33.00 34.70 N/R N/R N/R N/R

Trim Squirt Nozzles
TS
Products
u TG and TT Trim Squirt Nozzle............................................................................ 81
u TS Trim Squirt Needle Jet Nozzle....................................................................... 82
u VersaTrim™ System.......................................................................................... 87
80 Go to Main TOC
Trim Squirt Nozzles
Series TG and TT Trim Squirt Nozzle
Double O-ring Double O-ring
Swivel End Swivel End
Adjuster Adjuster
Extended Body
M10X0.75 M10X0.75
Right hand orientation
Right hand orientation
Left hand orientation Left hand orientation
Short with drip guard and adjusting tab Long with drip guard and adjusting tab
Double O-ring M10X0.75

Double O-ring
Adjustable
Adjustable
Swivel End
Swivel End
M10X0.75
Drip Edge
9 mm
Non-swivel with drip guard Swivel without adjusting tab Swivel without adjusting tab and
no drip guard
TG and TT Trim Squirt Nozzle Ordering Information Nozzle Series Code Option Code
Metric and British Left Hand Adjusting Tab LH
TT
Threads Right Hand Adjusting Tab RH
TT 10M R LH S 005005
Standard US Threads TG Long L
Nozzle Option *Orifice Short S
Series Size (Inch) Thread Size Code Swivel No Tab NS
Thread Size Insert Construction Swivel With Tab WS
1/4” BSPT 1/4
Material No Swivel and No Tab NST
M10 X 0.75 10M
1/8” MNPT 1/8
* Orifice size single or dual
Optional Adapters
Insert Material Code A30591G02 – 0.375” NPT to
Ruby R M10 X 0.75 316SS with 50 Mesh
Screen (G01 without Screen)
Sapphire S
A31647G02 – 0.375” BSPT to
M10 X 0.75 316SS with 50 Mesh
Construction Material Code Screen (G01 without Screen)
316SS S B29291 – 3/8” to 1/8” NPT Brass with
Arrestech A 50 Mesh Screen
B36231 – 3/8” to 1/8” NPT 316 Arres-
Tech 150 with 50 Mesh Screen
B37584G01, 02, 03 – 3/8” to 1/8”
BSPT ArresTech150 (80, 100, and 150
Mesh)
KSD007709 – 9/16” to 1/8” NPT 316SS
with 50 Mesh Screen
Go to Trim Squirt Nozzles Tab 81

Trim Squirt Nozzles
Series TS Trim Squirt Needle Jet Nozzle
The TS Trim Squirt needle jet nozzle is available with Nozzle Tip, Nozzle Tip, Nozzle Tip,
316SS, Duracerm ceramic, ruby, or sapphire insert Duracerm with Screen, Stainless
materials and is designed to deliver one, two, or three (see table) Stainless Steel Steel
solid streams of water from a single nozzle at a wide (see table) (see table)
range of pressures. Ruby and sapphire inserts have
excellent erosion resistance to liquid flow, maximizing Nozzle Tip Brass Screen ArresTech Plated
nozzle life. Duracerm ceramic is one of the toughest with Screen, Holder and 316SS Screen
shower nozzle materials and is good for withstanding Duracerm Stainless Holder and
thermal shock. The nozzle tip can be purchased alone or (see table) Steel 50 Mesh Stainless Steel
as an assembly with a 50 mesh stainless steel screen. Replacement Replacement
Screen Screen
Construction B29291 – B36231 –
All TS series nozzle bodies are made of brass or optional (3/8 NPT M x (3/8 NPT M x
ArresTech plated 316SS. The option screen is made of 1/8 NPT F) 1/8 NPT F)
316SS and the screen holder is brass. The nozzles are
designed for use in systems that operate up to 1000 psig.
0.687" 0.687"
0.50" 0.50"
1 1
4 4
3 3
1.5" 1.5"
2.000" 2.000"
1/8" 1/8"
3.250" 3/8" 3.250" 3/8"

Nozzle Tip Nozzle Tip
with Metal Insert
2 2
1 Metal Insert Nozzle Assembly 1 Duracerm Insert Nozzle Assembly

2 Mesh Screen 2 Mesh Screen
3 Brass Nozzle Tube 3 Brass Nozzle Tube
4 Orifice Disc 4 Orifice Disc
Nozzle Tip Nozzle Tip

with Screen and Metal Insert with Screen and Insert
Trim Squirt Nozzle Ordering Information Option Code Connection Size/Type Code
Nozzle Tip Only. No 1/8” NPT without Filter 1/8
N
Screen 3/8” NPT with Filter 3/8
TS 1/8 R N B 005 Includes 50 Mesh Filter F 3/8” BSPT with Filter 6B
Nozzle Option Orifice 1/8” BSPT without Filter 2B
Series Number Construction Material Code
Insert Material Code
Connection Insert Construction Brass B
Material Ruby R
Material ArresTech Plated
A Sapphire P
316SS*
Duracerm D
Please see page 4 for more complete
ArresTech information. 316SS S
82 Go to Trim Squirt Nozzles Tab

Series Trim Squirt Nozzle
Sapphire/ Nozzle Nozzle Pressure (PSI)

Duracerm 316SS
Ruby Number Orifice (inch) 20 40 60 80 100 200 400 600 800 1000
X 005 0.005 0.002 0.003 0.004 0.004 0.005 0.006 0.009 0.011 0.013 0.014
X 005005 0.005 x 0.005 0.004 0.006 0.007 0.008 0.009 0.013 0.018 0.022 0.026 0.029
X 008 0.008 0.005 0.008 0.009 0.011 0.012 0.017 0.024 0.029 0.033 0.037
X 008008 0.008 x 0.008 0.010 0.015 0.018 0.021 0.023 0.033 0.047 0.057 0.066 0.074
X X 010 0.010 0.008 0.012 0.014 0.016 0.018 0.026 0.036 0.045 0.051 0.058
X 010010 0.010 x 0.010 0.016 0.023 0.028 0.033 0.036 0.051 0.073 0.089 0.103 0.115
X 012 0.012 0.012 0.017 0.020 0.023 0.026 0.037 0.052 0.064 0.074 0.083
X 012012 0.012 x 0.012 0.023 0.033 0.041 0.047 0.052 0.074 0.105 0.129 0.148 0.166
X 012012012 0.012 x 0.012 x 0.012 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035 0.035
X 013013 0.013 x 0.013 0.027 0.038 0.047 0.054 0.061 0.086 0.120 0.150 0.170 0.019
X 014 0.014 0.016 0.023 0.028 0.032 0.036 0.050 0.071 0.087 0.101 0.113
X 015 0.015 0.018 0.026 0.032 0.037 0.041 0.058 0.082 0.100 0.116 0.130
X 015015 0.015 x 0.015 0.037 0.052 0.063 0.073 0.082 0.116 0.164 0.201 0.232 0.259
X 015015015 0.015 x 0.015 x 0.015 0.055 0.078 0.095 0.110 0.123 0.174 0.246 0.301 0.348 0.389
X 016 0.016 0.021 0.029 0.036 0.041 0.046 0.065 0.090 0.115 0.130 0.145
X 016016 0.016 x 0.016 0.041 0.058 0.071 0.082 0.092 0.130 0.180 0.230 0.260 0.290
X 018 0.018 0.026 0.037 0.046 0.053 0.059 0.083 0.118 0.144 0.167 0.186
X 018018 0.018 x 0.018 0.053 0.075 0.091 0.105 0.118 0.167 0.236 0.289 0.333 0.373
X 020 0.020 0.033 0.046 0.056 0.065 0.073 0.103 0.146 0.178 0.206 0.230
X 020015 0.020 x 0.015 0.051 0.072 0.088 0.102 0.114 0.161 0.227 0.278 0.322 0.360
X 020020 0.020 x 0.020 0.065 0.092 0.113 0.130 0.146 0.206 0.291 0.356 0.412 0.460
X 020040 0.020 x 0.040 0.163 0.230 0.282 0.325 0.364 0.514 0.728 0.891 1.029 1.150
X 023 0.023 0.043 0.061 0.075 0.086 0.096 0.136 0.192 0.236 0.272 0.304
X 023023 0.023 x 0.023 0.086 0.122 0.149 0.172 0.192 0.272 0.385 0.471 0.544 0.609
X 024 0.024 0.047 0.066 0.081 0.094 0.105 0.148 0.210 0.257 0.297 0.332
X 024024 0.024 x 0.024 0.094 0.133 0.163 0.188 0.210 0.297 0.420 0.514 0.594 0.664
X 025 0.025 0.051 0.072 0.088 0.102 0.114 0.161 0.227 0.278 0.322 0.360
X 025020 0.025 x 0.020 0.083 0.118 0.144 0.167 0.186 0.264 0.373 0.457 0.527 0.590
X 025025 0.025 x 0.025 0.102 0.144 0.176 0.203 0.227 0.322 0.455 0.557 0.643 0.719
X 025020015 0.025 x 0.020 x 0.015 0.099 0.141 0.173 0.199 0.223
X X 028 0.028 0.064 0.090 0.110 0.128 0.143 0.202 0.285 0.349 0.403 0.451
X 028028 0.028 X 0.028 0.128 0.180 0.221 0.255 0.285 0.403 0.570 0.699 0.807 0.902
X 030 0.030 0.073 0.104 0.127 0.146 0.164 0.232 0.327 0.401 0.463 0.518
X 030030 0.030 x 0.030 0.146 0.207 0.254 0.293 0.327 0.463 0.655 0.802 0.926 1.035
X 032 0.032 0.083 0.118 0.145 0.167 0.187 0.264 0.373 0.457 0.528 0.590
X 033 0.033 0.089 0.125 0.153 0.177 0.198 0.280 0.396 0.485 0.560 0.626
X 033033 0.033 x 0.033 0.177 0.251 0.307 0.354 0.396
X 035035 0.035 X 0.035 0.199 0.281 0.345 0.398 0.445 0.629 0.890 1.090 1.259 1.407
X 036 0.036 0.106 0.149 0.183 0.211 0.236 0.334 0.472 0.579 0.668 0.747
X X X 040 0.040 0.130 0.184 0.225 0.260 0.291 0.412 0.582 0.713 0.823 0.920
X 040040 0.040 x 0.040 0.260 0.368 0.451 0.521 0.582
X 045 0.045 0.165 0.233 0.286 0.330 0.369 0.522 0.738 0.904 1.044 1.167

Sapphire/ Nozzle Nozzle Pressure (PSI)

Duracerm 316SS
Ruby Number Orifice (inch) 20 40 60 80 100 200 400 600 800 1000
X 048 0.048 0.188 0.266 0.325 0.376 0.420 0.594 0.840 1.029 1.188 1.328
X 050 0.050 0.203 0.288 0.352 0.407 0.455 0.643 0.910 1.114 1.287 1.439
X 050050 0.050 x 0.050 0.407 0.575 0.705 0.814 0.910
X 055 0.055 0.246 0.348 0.426 0.492 0.550 0.778 1.100 1.348 1.556 1.740
X 060 0.060 0.293 0.415 0.508 0.587 0.656 0.928 1.312 1.607 1.856 2.075
X 080 0.080 0.522 0.738 0.903 1.043 1.166 1.649 2.333 2.857 3.299 3.688
X 093 0.093 0.705 0.997 1.221 1.410 1.576 2.229 3.152 3.861 4.458 4.984
X 114 0.114 1.059 1.498 1.835 2.118 2.368 3.349 4.737 5.801 6.699 7.490


Pressure kPa (Bar)
Sapphire/ Nozzle Nozzle
Duracerm 316SS 100 200 300 400 600 800 1000 2000 4000 7000
Ruby Number Orifice (mm)
1.00 2.00 3.00 4.00 6.00 8.00 10.00 20.00 40.00 70.00
X 005 0.127 0.007 0.009 0.011 0.013 0.016 0.019 0.021 0.029 0.041 0.055
X 005005 0.127 x 0.127 0.013 0.019 0.023 0.026 0.032 0.037 0.041 0.059 0.083 0.110
X 008 0.200 0.017 0.024 0.029 0.034 0.041 0.048 0.055 0.075 0.105 0.140
X 008008 0.200 x 0.200 0.033 0.047 0.058 0.067 0.082 0.095 0.110 0.150 0.210 0.280
X X 010 0.254 0.026 0.037 0.045 0.052 0.064 0.074 0.083 0.117 0.166 0.219
X 010010 0.254 x 0.254 0.052 0.074 0.091 0.105 0.128 0.148 0.166 0.234 0.332 0.439
X 012 0.305 0.038 0.054 0.066 0.076 0.086 0.100 0.120 0.169 0.240 0.317
X 012012 0.305 x 0.305 0.076 0.107 0.131 0.152 0.173 0.200 0.240 0.339 0.479 0.634
X 012012012 0.305 x 0.305 x 0.305 0.114 0.161 0.197 0.227 0.259 0.300 0.359 0.508 0.719 0.951
X 013013 0.330 x 0.330 0.088 0.120 0.150 0.180 0.220 0.250 0.280 0.390 0.560 0.740
X 014 0.356 0.051 0.073 0.089 0.103 0.126 0.145 0.162 0.230 0.325 0.430
X 015 0.381 0.059 0.084 0.103 0.118 0.135 0.156 0.187 0.265 0.374 0.495
X 015015 0.381 x 0.381 0.118 0.167 0.205 0.237 0.270 0.312 0.374 0.529 0.749 0.990
X 015015015 0.038 x 0.038 x 0.038 0.178 0.251 0.308 0.355 0.405 0.468 0.562 0.794 1.123 1.486
X 016 0.406 0.070 0.095 0.120 0.135 0.165 0.195 0.215 0.305 0.430 0.570
X 016016 0.406 x 0.406 0.140 0.190 0.240 0.270 0.330 0.390 0.430 0.610 0.860 1.140
X 018 0.457 0.085 0.120 0.147 0.170 0.208 0.240 0.269 0.380 0.537 0.711
X 018018 0.457 x 0.457 0.170 0.240 0.294 0.340 0.416 0.481 0.537 0.760 1.074 1.421
X 020 0.508 0.105 0.148 0.182 0.210 0.257 0.297 0.332 0.469 0.663 0.877
X 020015 0.508 x 0.381 0.164 0.232 0.284 0.328 0.392 0.453 0.519 0.734 1.038 1.373
X 020020 0.508 x 0.508 0.210 0.297 0.363 0.419 0.514 0.593 0.663 0.938 1.326 1.755
X 020040 0.508 x 1.016 0.524 0.742 0.908 1.049 1.285 1.483 1.658 2.345 3.317 4.387
X 023 0.584 0.139 0.196 0.240 0.277 0.340 0.392 0.439 0.620 0.877 1.160
X 023023 0.584 x 0.584 0.277 0.392 0.480 0.555 0.679 0.785 0.877 1.240 1.754 2.321
X 024 0.610 0.151 0.214 0.262 0.303 0.345 0.399 0.479 0.677 0.957 1.266
X 024024 0.610 x 0.610 0.303 0.428 0.524 0.605 0.691 0.798 0.957 1.354 1.914 2.532
X 025 0.635 0.164 0.232 0.284 0.328 0.401 0.463 0.518 0.733 1.036 1.371
X 025020 0.635 x 0.508 0.269 0.380 0.465 0.537 0.658 0.760 0.850 1.202 1.700 2.248
X 025025 0.635 x 0.635 0.328 0.463 0.568 0.655 0.803 0.927 1.036 1.466 2.073 2.742
X 025020015 0.635 x 0.508 x 0.381 0.328 0.464 0.568 0.656 0.793
X X 028 0.711 0.206 0.291 0.357 0.412 0.470 0.543 0.651 0.921 1.303 1.723
X 028028 0.071 X 0.071 0.412 0.583 0.714 0.824 0.940 1.086 1.303 1.842 2.605 3.447
X 030 0.762 0.237 0.335 0.410 0.474 0.540 0.624 0.749 1.059 1.497 1.981
X 030030 0.762 x 0.762 0.473 0.670 0.820 0.947 1.080 1.248 1.497 2.118 2.995 3.962
X 032 0.813 0.269 0.381 0.467 0.539 0.615 0.710 0.852 1.205 1.704 2.254
X 033 0.838 0.286 0.405 0.496 0.573 0.654 0.755 0.906 1.281 1.812 2.397
X 033033 0.838 x 0.838 0.573 0.810 0.992 1.146 1.307
X 035035 0.889 x 0.889 0.642 0.907 1.111 1.283 1.572 1.815 2.029 2.869 4.058 5.368
X 036 0.914 0.340 0.482 0.590 0.681 0.777 0.898 1.077 1.523 2.153 2.849
X X X 040 1.016 0.420 0.593 0.727 0.839 1.028 1.187 1.327 1.876 2.653 3.510
X 040040 1.016 x 1.016 0.839 1.187 1.453 1.678 2.055
X 045 1.194 0.532 0.752 0.921 1.064 1.214 1.402 1.682 2.379 3.365 4.451

Pressure kPa (Bar)
Sapphire/ Nozzle Nozzle
Duracerm 316SS 100 200 300 400 600 800 1000 2000 4000 7000
Ruby Number Orifice (mm)
1.00 2.00 3.00 4.00 6.00 8.00 10.00 20.00 40.00 70.00
048 1.219 0.605 0.856 1.048 1.211 1.381 1.596 1.914 2.707 3.828 5.064
X 050 1.270 0.656 0.928 1.136 1.312 1.607 1.855 2.074 2.933 4.149 5.488
X 050050 1.270 x 1.270 1.312 1.855 2.272 2.624 3.213
X 055 1.397 0.793 1.122 1.374 1.586 1.943 2.243 2.508 3.547 5.016 6.636
X 060 1.524 0.946 1.338 1.638 1.892 2.158 2.493 2.991 4.230 5.982 7.913
X 080 2.032 1.681 2.378 2.912 3.363 3.837 4.432 5.317 7.520 10.634 14.068
X 093 2.362 2.272 3.214 3.936 4.545 5.185 5.990 7.186 10.162 14.371 19.012
X 114 2.896 3.414 4.829 5.914 6.829 7.791 9.000 10.797 15.270 21.594 28.567

VersaTrim™ System
Trim Squirt Technology
Applications
Clean and precise sheet trimming is essential to operate a high-efficiency
paper machine. The VersaTrim System provides an accurate and adjustable
trim squirt system for the wet-end of the paper machine.
Features
• Easy to adjust MD nozzle angle
• Precise CD adjustment
• Quick, safe replacement
• Minimizes contaminant build-up and spray back
Benefits
• Fewer wet-end breaks due to drop-offs
• Improved sheet edge
• Reduced fiber mist equals less wash-ups
• More consistent turn-ups at the reel
Kadant’s VersaTrim turnkey solution maximizes paper machine efficiency and minimizes wet-end breaks due to drop-
offs and poor edge trim quality.
Pressure gauge
Calibrate 316 stainless steel

adjustment VersaTrim assembly Inline filter
scale
VersaTrim
Nozzle nozzle
adjustment
arm
Precision CD Mounting plate

movement
Double
Swivel adjustment tab o-rings
Trim Squirt Nozzles
Accurate, precise trim edge
Tips can be provided in ruby, sapphire, duracerm, or
stainless steel.
Drip edge
316 stainless
Ruby tipped nozzles steel material

VersaTrim System
Trim Nozzle Operating Recommendations
Basis Weight (PSI/BARS)
305 457 610 762 914 1067 1219 1372 1524 1676 1829 1981 M/minute
#/1000
#/3000
#/3300
gr/M2
1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 FPM
10.0 30 33 48.8 132/9.1 198/13.6 148/10.2 185/12.7 222/15.3 259/17.8 296/20.4 333/22.9 370/25.5 407/28.0 444/30.6 514/35.4
13.3 40 44 65.1 135/9.3 222/15.3 165/11.4 207/14.2 248/17.1 289/19.9 331/22.8 372/25.7 414/28.5 455/31.4 468/32.3 507/35.0
16.7 50 55 81.4 147/10.1 242/16.7 180/12.4 225/15.5 271/18.6 316/21.8 361/24.9 406/28.0 451/31.1 468/32.3 511/35.2 553/38.1
20.0 60 66 97.6 146/10.1 237/16.3 194/13.3 242/16.7 291/20.0 339/23.4 388/26.7 436/30.1 485/33.4 503/34.6 548/37.8
23.3 70 77 113.9 155/10.7 252/17.4 206/14.2 257/17.7 309/21.3 360/24.8 412/28.4 463/31.9 485/33.4 534/36.8 582/40.1
26.7 80 88 130.2 153/10.5 123/8.48 194/13.3 242/16.7 291/20.0 339/23.4 388/26.7 436/30.1 Trim Nozzle Orifice
30.0 90 99 146.4 160/11.0 128/8.88 203/14.0 254/17.5 304/21.0 355/24.5 406/28.0 457/31.5 mm Inch
0.35 0.014
33.3 100 110 162.7 167/11.5 134/9.25 211/14.6 264/18.2 317/21.9 370/25.5 423/29.2 476/32.8
0.4 0.016
36.7 110 121 179.0 163/11.2 130/8.98 200/13.8 250/17.2 301/20.7 351/24.2 0.45 0.018
0.5 0.020
40.0 120 132 195.2 169/11.6 134/9.29 207/14.3 259/17.8 311/21.4 363/25.0 0.6 0.024
43.3 130 143 211.5 174/12.0 139/9.59 214/14.7 267/18.4 321/22.1 374/25.8 0.7 0.028
0.8 0.031
Single Orifice Dual Orifice 0.9 0.035
Complete System
Trim Squirt Systems Pump Skid
• 600 psi capability

• Temperature controlled water delivery
• Self-contained
• Low-energy usage
• 10 micron duo water filtration
• Redundant spare pump
• Precision pressure control

Quick Connect Nozzles
QT QV
Products
u Series QT Quick Connect Fan Nozzle................................................................. 90
u Series QV Quick Connect Fan Nozzle................................................................ 91
Go to Main TOC 89
Series QT Quick Connect Fan Nozzle
Base, Nozzle — 316SS
Replacement for Spraying Systems QVVA VeeJet™ spray
A30875G01 – 1/8 NPTM
nozzle.
A30875G02 – 1/4 NPTM
A30875G03 – 3/8 NPTM
The QT series quick connect fan nozzle is designed to
A30875G04 – 1/2 NPTM
allow quick and easy nozzle tip removal and installation.
A seal is located on and removed with the nozzle tip
Seal
during maintenance. The fan nozzle produces a uniform
A30056 – Buna-N
flat fan spray pattern, and is available in a wide range of
fan angles that range from 15° to 110°.
Fan Nozzle
Construction
All QT series nozzles are constructed of 316SS. The nozzles
0.750"
0.31"
Wrench Flat
1.375"
Seal
Quick Connect Nozzle Ordering Information Construction Material Code

316SS S
QT S 015040
Nozzle
Series Fan/Orifice
Number
Construction
Material
90 Go to Quick Connect Nozzles Tab

Series QV Quick Connect Fan Nozzle
Base, Nozzle – 316SS (includes seal)
Replacement for Spraying Systems QVV VeeJet™ spray
B30012G01 – 1/8” NPT
nozzle.
B30012G02 – 1/4” NPT
B33971 – welded
The QV series quick connect fan nozzle is designed to
allow quick and easy nozzle tip removal and installation.
It can be provided with an NPT base that can be screwed Seal
into an existing coupling, or with a welded base for A28521 – Buna-N
installation in a new pipe. A seal is located in the coupling
between the nozzle tip and the base. The fan nozzle
produces a uniform flat fan spray pattern, and is available Fan Nozzle
in a wide range of fan angles that range from 15° to 110°.
Construction
All QT series nozzles are constructed of 316SS. The nozzles
0.875" 0.875"
0.31" Seal
Seal
1.142"
0.986"
1/8" NPT Thread for B30012G01

1/4" NPT Thread for B30012G02
Nozzle Tip Welded NPT
Nozzle Base Nozzle Base
Quick Connect Nozzle Ordering Information Construction Material Code

316SS S
QV S 015040
Nozzle
Series Fan/Orifice
Number
Construction
Material
Go to Quick Connect Nozzles Tab 91

Series QT and QV Quick Connect
Fan Nozzle
Nozzle Equivalent
(degree) at
40 psi
015015 0.015 0.02 0.03 0.04 0.05 0.05 0.06 0.07 0.09 10 15 24
015018 0.018 0.04 0.05 0.06 0.07 0.08 0.10 0.11 0.14 10 15 24
015021 0.021 0.05 0.07 0.08 0.10 0.11 0.13 0.15 0.18 10 15 24
015026 0.026 0.07 0.10 0.12 0.14 0.16 0.19 0.22 0.27 10 15 24
015031 0.031 0.11 0.15 0.18 0.21 0.24 0.29 0.33 0.41 10 15 24
015036 0.036 0.14 0.20 0.24 0.28 0.32 0.39 0.45 0.55 10 15 24
015040 0.040 0.18 0.25 0.31 0.35 0.40 0.48 0.56 0.68 10 15 24
015043 0.043 0.21 0.30 0.37 0.42 0.47 0.58 0.67 0.82 11 15 24
15 015052 0.052 0.28 0.40 0.49 0.57 0.63 0.77 0.89 1.10 11 15 21
015055 0.055 0.31 0.45 0.55 0.63 0.70 0.86 1.00 1.22 11 15 21
015057 0.057 0.35 0.50 0.61 0.71 0.79 0.97 1.12 1.37 11 15 21
015062 0.062 0.42 0.60 0.73 0.85 0.95 1.16 1.34 1.64 11 15 21
015070 0.070 0.53 0.75 0.92 1.06 1.19 1.45 1.68 2.05 11 15 20
015072 0.072 0.57 0.80 0.98 1.13 1.27 1.55 1.79 2.19 10 15 19
015078 0.078 0.71 1.00 1.22 1.41 1.58 1.94 2.24 2.74 10 15 19
015093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 10 15 19
015109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 10 15 19
025015 0.015 0.02 0.03 0.04 0.05 0.05 0.06 0.07 0.09 14 25 34
025018 0.018 0.04 0.05 0.06 0.07 0.08 0.10 0.11 0.14 14 25 34
025021 0.021 0.05 0.07 0.08 0.09 0.11 0.13 0.15 0.18 14 25 34
025026 0.026 0.07 0.10 0.12 0.14 0.16 0.19 0.22 0.27 14 25 33
025031 0.031 0.11 0.15 0.18 0.21 0.24 0.29 0.33 0.41 14 25 33
025036 0.036 0.14 0.20 0.24 0.28 0.32 0.39 0.45 0.55 14 25 33
025040 0.040 0.18 0.25 0.31 0.35 0.40 0.48 0.56 0.68 14 25 33
025043 0.043 0.21 0.30 0.37 0.42 0.47 0.58 0.67 0.82 14 25 33
025052 0.052 0.28 0.40 0.49 0.57 0.63 0.77 0.89 1.10 14 25 33
025055 0.055 0.31 0.45 0.55 0.63 0.70 0.86 1.00 1.22 14 25 33
025057 0.057 0.35 0.50 0.61 0.71 0.79 0.97 1.12 1.37 17 25 31
25
025062 0.062 0.42 0.60 0.73 0.85 0.95 1.16 1.34 1.64 17 25 31
025070 0.070 0.53 0.75 0.92 1.06 1.19 1.45 1.68 2.05 17 25 31
025072 0.072 0.57 0.80 0.98 1.13 1.26 1.55 1.79 2.19 17 25 31
025078 0.078 0.71 1.00 1.22 1.41 1.58 1.94 2.24 2.74 18 25 31
025093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 18 25 31
025109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 19 25 31
025141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 19 25 31
025156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 10.95 21 25 29
025172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.18 13.69 21 25 29
025187 0.187 4.24 6.00 7.35 8.49 9.49 11.62 13.42 16.43 22 25 29
025203 0.203 4.95 7.00 8.57 9.90 11.07 13.56 15.65 19.17 22 25 29
35 035033 0.033 0.12 0.17 0.21 0.24 0.27 0.33 0.38 0.46 24 35 43
040015 0.015 0.02 0.03 0.04 0.05 0.05 0.06 0.07 0.09 26 40 48
040018 0.018 0.04 0.05 0.06 0.07 0.08 0.10 0.11 0.14 26 40 48
40
040021 0.021 0.05 0.07 0.08 0.09 0.11 0.13 0.15 0.18 26 40 48
040026 0.026 0.07 0.10 0.12 0.14 0.16 0.19 0.22 0.27 26 40 48

Fan Nozzle
Nozzle Equivalent
(degree) at
40 psi
040031 0.031 0.11 0.15 0.18 0.21 0.24 0.29 0.34 0.41 29 40 51
040036 0.036 0.14 0.20 0.24 0.28 0.32 0.39 0.45 0.55 25 40 46
040040 0.040 0.18 0.25 0.31 0.35 0.40 0.48 0.56 0.68 25 40 50
040043 0.043 0.21 0.30 0.37 0.42 0.47 0.58 0.67 0.82 30 40 50
040052 0.052 0.28 0.40 0.49 0.57 0.63 0.77 0.89 1.10 30 40 50
040055 0.055 0.31 0.45 0.55 0.63 0.70 0.86 1.00 1.22 31 40 49
040057 0.057 0.35 0.50 0.61 0.71 0.79 0.97 1.12 1.37 31 40 49
040062 0.062 0.42 0.60 0.73 0.85 0.95 1.16 1.34 1.64 31 40 49
040070 0.070 0.53 0.75 0.92 1.06 1.19 1.45 1.68 2.05 31 40 47
40
040072 0.072 0.57 0.80 0.98 1.13 1.26 1.55 1.79 2.19 31 40 47
040078 0.078 0.71 1.00 1.22 1.41 1.58 1.94 2.24 2.74 31 40 47
040093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 31 40 47
040109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 31 40 47
040141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 31 40 47
040156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 10.95 34 40 45
040172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.18 13.69 35 40 45
040187 0.187 4.24 6.00 7.35 8.49 9.49 11.62 13.42 16.43 35 40 45
040203 0.203 4.95 7.00 8.57 9.90 11.07 13.56 15.65 19.17 35 40 43
050013 0.013 0.02 0.03 0.03 0.04 0.04 0.05 0.06 0.07 37 50 59
050015 0.015 0.02 0.03 0.04 0.05 0.05 0.06 0.07 0.09 37 50 59
050018 0.018 0.04 0.05 0.06 0.07 0.08 0.10 0.11 0.14 37 50 59
050021 0.021 0.05 0.07 0.08 0.09 0.11 0.13 0.15 0.18 37 50 59
050026 0.026 0.07 0.10 0.12 0.14 0.16 0.19 0.22 0.27 37 50 59
050031 0.031 0.11 0.15 0.18 0.21 0.24 0.29 0.34 0.41 38 50 58
050036 0.036 0.14 0.20 0.24 0.28 0.32 0.39 0.45 0.55 39 50 57
050040 0.040 0.18 0.25 0.31 0.35 0.40 0.48 0.56 0.68 40 50 56
050043 0.043 0.21 0.30 0.37 0.42 0.47 0.58 0.67 0.82 42 50 56
050052 0.052 0.28 0.40 0.49 0.57 0.63 0.77 0.89 1.10 42 50 56
050055 0.055 0.31 0.45 0.55 0.63 0.70 0.86 1.00 1.22 44 50 56
50 050057 0.057 0.35 0.50 0.61 0.71 0.79 0.97 1.12 1.37 44 50 56
050062 0.062 0.42 0.60 0.73 0.85 0.95 1.16 1.34 1.64 45 50 55
050070 0.070 0.53 0.75 0.92 1.06 1.19 1.45 1.68 2.05 45 50 55
050072 0.072 0.57 0.80 0.98 1.13 1.26 1.55 1.79 2.19 45 50 55
050078 0.078 0.71 1.00 1.22 1.41 1.58 1.94 2.24 2.74 45 50 55
050093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 45 50 55
050109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 45 50 55
050141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 45 50 55
050156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 10.95 46 50 54
050172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.18 13.69 46 50 54
050187 0.187 4.24 6.00 7.35 8.49 9.49 11.62 13.42 16.43 46 50 54
050203 0.203 4.95 7.00 8.57 9.90 11.07 13.56 15.65 19.17 46 50 54
065013 0.013 0.02 0.03 0.03 0.04 0.04 0.05 0.06 0.07 44 65 77
65 065015 0.015 0.02 0.03 0.04 0.05 0.05 0.06 0.07 0.09 44 65 77
065018 0.018 0.04 0.05 0.06 0.07 0.08 0.10 0.11 0.14 44 65 77

Fan Nozzle
Nozzle Equivalent
(degree) at
40 psi
065021 0.021 0.05 0.07 0.08 0.09 0.11 0.13 0.15 0.18 44 65 77
065026 0.026 0.07 0.10 0.12 0.14 0.16 0.19 0.22 0.27 44 65 77
065028 0.028 0.08 0.12 0.15 0.17 0.19 0.23 0.27 0.33 44 65 77
065031 0.031 0.11 0.15 0.18 0.21 0.24 0.29 0.34 0.41 44 65 77
065036 0.036 0.14 0.20 0.24 0.28 0.32 0.39 0.45 0.55 44 65 77
065040 0.040 0.18 0.25 0.31 0.35 0.40 0.48 0.56 0.68 44 65 77
065043 0.043 0.21 0.30 0.37 0.42 0.47 0.58 0.67 0.82 47 65 76
065052 0.052 0.28 0.40 0.49 0.57 0.63 0.77 0.89 1.10 47 65 76
065055 0.055 0.31 0.45 0.55 0.63 0.70 0.86 1.00 1.22 50 65 75
065057 0.057 0.35 0.50 0.61 0.71 0.79 0.97 1.12 1.37 51 65 74
065062 0.062 0.42 0.60 0.73 0.85 0.95 1.16 1.34 1.64 51 65 74
65
065067 0.067 0.51 0.72 0.88 1.02 1.14 1.39 1.61 1.97 51 65 74
065070 0.070 0.53 0.75 0.92 1.06 1.19 1.45 1.68 2.05 52 65 73
065072 0.072 0.57 0.80 0.98 1.13 1.26 1.55 1.79 2.19 52 65 73
065078 0.078 0.71 1.00 1.22 1.41 1.58 1.94 2.24 2.74 55 65 73
065093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 55 65 73
065109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 55 65 73
065141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 55 65 73
065156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 10.95 54 65 73
065172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.18 13.69 55 65 71
065187 0.187 4.24 6.00 7.35 8.49 9.49 11.62 13.42 16.43 60 65 68
065203 0.203 4.95 7.00 8.57 9.90 11.07 13.56 15.65 19.17 60 65 68
073016 0.016 0.03 0.04 0.05 0.05 0.06 0.07 0.08 0.10 53 73 86
073022 0.022 0.05 0.08 0.09 0.11 0.12 0.15 0.17 0.21 53 73 86
073028 0.028 0.08 0.12 0.14 0.16 0.18 0.22 0.26 0.32 53 73 86
073032 0.032 0.11 0.15 0.19 0.22 0.24 0.30 0.34 0.42 55 73 83
073040 0.040 0.18 0.25 0.31 0.35 0.40 0.48 0.56 0.68 58 73 82
73 073045 0.045 0.22 0.31 0.38 0.44 0.49 0.60 0.69 0.84 58 73 82
073051 0.051 0.27 0.39 0.47 0.54 0.61 0.75 0.86 1.06 58 73 81
073056 0.056 0.33 0.46 0.57 0.65 0.73 0.89 1.03 1.27 60 73 80
073065 0.065 0.44 0.62 0.75 0.87 0.97 1.19 1.38 1.69 63 73 78
073072 0.072 0.57 0.80 0.98 1.13 1.26 1.55 1.79 2.19 64 73 74
073078 0.078 0.65 0.92 1.13 1.31 1.46 1.79 2.07 2.53 63 73 73
080018 0.018 0.04 0.05 0.06 0.07 0.08 0.10 0.11 0.14 61 80 95
080021 0.021 0.05 0.07 0.08 0.09 0.11 0.13 0.15 0.18 67 80 94
080026 0.026 0.07 0.10 0.12 0.14 0.16 0.19 0.22 0.27 68 80 89
080031 0.031 0.11 0.15 0.18 0.21 0.24 0.29 0.34 0.41 68 80 89
080036 0.036 0.14 0.20 0.24 0.28 0.32 0.39 0.45 0.55 69 80 88
80 080040 0.040 0.18 0.25 0.31 0.35 0.40 0.48 0.56 0.68 70 80 87
080043 0.043 0.21 0.30 0.37 0.42 0.47 0.58 0.67 0.82 71 80 86
080052 0.052 0.28 0.40 0.49 0.57 0.63 0.77 0.89 1.10 71 80 86
080057 0.057 0.35 0.50 0.61 0.71 0.79 0.97 1.12 1.37 71 80 86
080062 0.062 0.42 0.60 0.73 0.85 0.95 1.16 1.34 1.64 72 80 85
080070 0.070 0.53 0.75 0.92 1.06 1.19 1.45 1.68 2.05 72 80 84

Fan Nozzle
Nozzle Equivalent
(degree) at
40 psi
080072 0.072 0.57 0.80 0.98 1.13 1.26 1.55 1.79 2.19 72 80 84
080078 0.078 0.71 1.00 1.22 1.41 1.58 1.94 2.24 2.74 74 80 83
080093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 74 80 83
080109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 74 80 83
80 080141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 74 80 83
080156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 10.95 74 80 83
080172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.18 13.69 75 80 83
080187 0.187 4.24 6.00 7.35 8.49 9.49 11.62 13.42 16.43 75 80 83
080203 0.203 4.95 7.00 8.57 9.90 11.07 13.56 15.65 19.17 75 80 83
095022 0.022 0.05 0.07 0.09 0.10 0.11 0.14 0.16 0.20 81 95 101
095026 0.026 0.07 0.10 0.12 0.14 0.16 0.19 0.22 0.27 81 95 101
095031 0.031 0.11 0.15 0.18 0.21 0.24 0.29 0.34 0.41 82 95 105
095040 0.040 0.18 0.25 0.31 0.35 0.40 0.48 0.56 0.68 82 95 105
095036 0.036 0.14 0.20 0.24 0.28 0.32 0.39 0.45 0.55 82 95 105
095043 0.043 0.21 0.30 0.37 0.42 0.47 0.58 0.67 0.82 82 95 105
095052 0.052 0.28 0.40 0.49 0.57 0.63 0.77 0.89 1.10 83 95 104
095055 0.055 0.31 0.45 0.55 0.63 0.70 0.86 1.00 1.22 83 95 104
095057 0.057 0.35 0.50 0.61 0.71 0.79 0.97 1.12 1.37 84 95 102
095062 0.062 0.42 0.60 0.73 0.85 0.95 1.16 1.34 1.64 86 95 101
95
95070 0.070 0.53 0.75 0.92 1.06 1.19 1.45 1.68 2.05 87 95 100
095072 0.072 0.57 0.80 0.98 1.13 1.26 1.55 1.79 2.19 87 95 100
095078 0.078 0.71 1.00 1.22 1.41 1.58 1.94 2.24 2.74 89 95 100
095093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 90 95 100
095109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 90 95 100
095141 0.141 2.12 3.00 3.67 4.24 4.74 5.81 6.71 8.22 91 95 101
095156 0.156 2.83 4.00 4.90 5.66 6.32 7.75 8.94 10.95 92 95 100
095172 0.172 3.54 5.00 6.12 7.07 7.91 9.68 11.18 13.69 93 95 99
095187 0.187 4.24 6.00 7.35 8.49 9.49 11.62 13.42 16.43 93 95 99
095203 0.203 4.95 7.00 8.57 9.90 11.07 13.56 15.65 19.17 93 95 99
110022 0.022 0.05 0.08 0.09 0.11 0.12 0.15 0.17 0.21 94 110 121
110026 0.026 0.07 0.10 0.12 0.14 0.16 0.19 0.22 0.27 94 110 121
110031 0.031 0.11 0.15 0.18 0.21 0.24 0.29 0.34 0.41 97 110 121
110036 0.036 0.14 0.20 0.24 0.28 0.32 0.39 0.45 0.55 98 110 120
110040 0.040 0.18 0.25 0.31 0.35 0.40 0.48 0.56 0.68 98 110 120
110043 0.043 0.21 0.30 0.37 0.42 0.47 0.58 0.67 0.82 100 110 119
110052 0.052 0.28 0.40 0.49 0.57 0.63 0.77 0.89 1.10 100 110 119
110 110055 0.055 0.31 0.45 0.55 0.63 0.70 0.86 1.00 1.22 100 110 118
110057 0.057 0.35 0.50 0.61 0.71 0.79 0.97 1.12 1.37 100 110 118
110062 0.062 0.42 0.60 0.73 0.85 0.95 1.16 1.34 1.64 101 110 117
110070 0.070 0.53 0.75 0.92 1.06 1.19 1.45 1.68 2.05 102 110 117
110072 0.072 0.57 0.80 0.98 1.13 1.26 1.55 1.79 2.19 102 110 117
110078 0.078 0.71 1.00 1.22 1.41 1.58 1.94 2.24 2.74 103 110 117
110093 0.093 1.06 1.50 1.84 2.12 2.37 2.90 3.35 4.11 104 110 117
110109 0.109 1.41 2.00 2.45 2.83 3.16 3.87 4.47 5.48 105 110 118

Fan Nozzle
Fan Angle Pressure kPa (Bars) Fan Angle at kPa (Bar)*
(degree) at Nozzle Equivalent
100 200 300 400 500 1000 1500 2000 138 275 552
275 kPa Number Orifice (mm)
(2.75 Bar) 1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00 1.38 2.75 5.52
015011 0.279 0.039 0.055 0.067 0.077 0.087 0.123 0.150 0.173 10 15 24
015013 0.330 0.057 0.081 0.099 0.114 0.127 0.180 0.221 0.255 10 15 24
015015 0.381 0.075 0.106 0.130 0.150 0.168 0.238 0.291 0.336 10 15 24
015018 0.457 0.114 0.161 0.197 0.228 0.255 0.360 0.441 0.510 10 15 24
015021 0.533 0.153 0.216 0.264 0.305 0.341 0.483 0.591 0.683 10 15 24
015026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 10 15 24
015036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 10 15 24
015040 1.02 0.570 0.806 0.987 1.14 1.27 1.80 2.21 2.55 11 15 24
15
015043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 11 15 21
015052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 11 15 21
015055 1.40 1.01 1.43 1.76 2.03 2.27 3.21 3.93 4.54 11 15 21
015062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 11 15 21
015070 1.78 1.71 2.42 2.96 3.42 3.82 5.40 6.62 7.64 11 15 20
015078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 10 15 19
015093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 10 15 19
015109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 10 15 19
025011 0.279 0.039 0.055 0.067 0.077 0.087 0.123 0.150 0.173 10 15 19
025013 0.330 0.057 0.081 0.099 0.114 0.127 0.180 0.221 0.255 14 25 34
025015 0.381 0.075 0.106 0.130 0.150 0.168 0.238 0.291 0.336 14 25 34
025018 0.457 0.114 0.161 0.197 0.228 0.255 0.360 0.441 0.510 14 25 34
025021 0.533 0.153 0.216 0.264 0.305 0.341 0.483 0.591 0.683 14 25 33
025026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 14 25 33
025036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 14 25 33
025043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 14 25 33
025052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 14 25 33
025057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 14 25 33
25
025062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 14 25 33
025072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 17 25 31
025078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 17 25 31
025093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 17 25 31
025109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 17 25 31
025141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 18 25 31
025156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 18 25 31
025172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 19 25 31
025187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 19 25 31
025203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 21 25 29
040011 0.279 0.039 0.055 0.067 0.077 0.087 0.123 0.150 0.173 21 25 29
040013 0.330 0.057 0.081 0.099 0.114 0.127 0.180 0.221 0.255 22 25 29
40 040015 0.381 0.075 0.106 0.130 0.150 0.168 0.238 0.291 0.336 22 25 29
040018 0.457 0.114 0.161 0.197 0.228 0.255 0.360 0.441 0.510 24 35 43
040021 0.533 0.153 0.216 0.264 0.305 0.341 0.483 0.591 0.683 26 40 48

Fan Nozzle
100 200 300 400 500 1000 1500 2000 138 275 552
(2.75 Bar) 1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00 1.38 2.75 5.52
040026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 26 40 48
040031 0.787 0.342 0.483 0.592 0.684 0.764 1.08 1.32 1.53 26 40 48
040036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 26 40 48
040043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 29 40 51
040052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 25 40 46
040057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 25 40 50
040062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 30 40 50
040072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 30 40 50
40 040078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 31 40 49
040093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 31 40 49
040109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 31 40 49
040141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 31 40 47
040156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 31 40 47
040172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 31 40 47
040187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 31 40 47
040203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 31 40 47
040250 6.35 22.8 32.2 39.5 45.6 51.0 64.9 79.4 91.7 31 40 47
050011 0.279 0.039 0.055 0.067 0.077 0.087 0.123 0.150 0.173 34 40 45
050013 0.330 0.057 0.081 0.099 0.114 0.127 0.180 0.221 0.255 35 40 45
050015 0.381 0.075 0.106 0.130 0.150 0.168 0.238 0.291 0.336 35 40 45
050018 0.457 0.114 0.161 0.197 0.228 0.255 0.360 0.441 0.510 35 40 43
050021 0.533 0.153 0.216 0.264 0.305 0.341 0.483 0.591 0.683 37 50 59
050026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 37 50 59
050036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 37 50 59
050043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 37 50 59
050052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 37 50 59
050057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 38 50 58
50
050062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 39 50 57
050072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 40 50 56
050078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 42 50 56
050093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 42 50 56
050109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 44 50 56
050141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 44 50 56
050156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 45 50 55
050172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 45 50 55
050187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 45 50 55
050203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 45 50 55
065011 0.279 0.039 0.055 0.067 0.077 0.087 0.123 0.150 0.173 44 65 77
065013 0.330 0.057 0.081 0.099 0.114 0.127 0.180 0.221 0.255 44 65 77
65
065015 0.381 0.075 0.106 0.130 0.150 0.168 0.238 0.291 0.336 44 65 77
065018 0.457 0.114 0.161 0.197 0.228 0.255 0.360 0.441 0.510 44 65 77

Fan Nozzle
100 200 300 400 500 1000 1500 2000 138 275 552
(2.75 Bar) 1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00 1.38 2.75 5.52
065021 0.533 0.153 0.216 0.264 0.305 0.341 0.483 0.591 0.683 44 65 77
065026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 44 65 77
065028 0.711 0.273 0.387 0.474 0.547 0.611 0.865 1.06 1.22 44 65 77
065031 0.787 0.342 0.483 0.592 0.684 0.764 1.08 1.32 1.53 44 65 77
065036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 44 65 77
065040 1.02 0.570 0.806 0.987 1.14 1.27 1.80 2.21 2.55 47 65 76
065043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 47 65 76
065052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 50 65 75
065057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 51 65 74
65 065062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 51 65 74
065072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 51 65 74
065078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 52 65 73
065093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 52 65 73
065109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 55 65 73
065141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 55 65 73
065156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 55 65 73
065172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 55 65 73
065187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 54 65 73
065203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 55 65 71
073012 0.305 0.052 0.074 0.090 0.104 0.117 0.165 0.202 0.234 55 65 71
073016 0.406 0.093 0.131 0.160 0.185 0.207 0.293 0.359 0.414 55 65 71
073022 0.559 0.175 0.248 0.304 0.351 0.392 0.555 0.680 0.785 55 65 71
073032 0.813 0.351 0.496 0.608 0.702 0.785 1.11 1.36 1.57 56 65 71
73
073040 1.02 0.570 0.806 0.987 1.14 1.27 1.80 2.21 2.55 56 65 70
073045 1.14 0.702 0.993 1.22 1.40 1.57 2.22 2.72 3.14 57 65 70
073056 1.42 1.05 1.49 1.82 2.11 2.35 3.33 4.08 4.71 58 65 69
073072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 59 65 68
080018 0.457 0.114 0.161 0.197 0.228 0.255 0.360 0.441 0.510 60 65 68
080021 0.533 0.153 0.216 0.264 0.305 0.341 0.483 0.591 0.683 60 65 68
080026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 53 73 86
080031 0.787 0.342 0.483 0.592 0.684 0.764 1.08 1.32 1.53 53 73 86
080036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 53 73 86
080043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 55 73 83
080052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 58 73 82
80 080057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 58 73 82
080062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 58 73 81
080072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 60 73 80
080078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 63 73 78
080093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 64 73 74
080109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 63 73 73
080141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 61 80 95
080156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 67 80 94

Fan Nozzle
100 200 300 400 500 1000 1500 2000 138 275 552
(2.75 Bar) 1.00 2.00 3.00 4.00 5.00 10.00 15.00 20.00 1.38 2.75 5.52
080172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 68 80 89
80 080187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 68 80 89
080203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 69 80 88
095022 0.559 0.175 0.248 0.304 0.351 0.392 0.555 0.680 0.785 70 80 87
095026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 71 80 86
095031 0.787 0.342 0.483 0.592 0.684 0.764 1.08 1.32 1.53 71 80 86
095036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 71 80 86
095043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 72 80 85
095052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 72 80 84
095057 1.45 1.14 1.61 1.97 2.28 2.55 3.60 4.41 5.10 72 80 84
095062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 74 80 83
95 095072 1.83 1.82 2.58 3.16 3.65 4.08 5.77 7.06 8.15 74 80 83
095078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 74 80 83
095093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 74 80 83
095109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 74 80 83
095141 3.58 6.84 9.67 11.8 13.7 15.3 21.6 26.5 30.6 75 80 83
095156 3.96 9.12 12.9 15.8 18.2 20.4 28.8 35.3 40.8 75 80 83
095172 4.37 11.4 16.1 19.7 22.8 25.5 36.0 44.1 51.0 75 80 83
095187 4.75 13.7 19.3 23.7 27.3 30.6 43.2 53.0 61.1 81 95 101
095203 5.16 16.0 22.6 27.6 31.9 35.7 50.4 61.8 71.3 81 95 101
110022 0.559 0.175 0.248 0.304 0.351 0.392 0.555 0.680 0.785 82 95 105
110026 0.660 0.228 0.322 0.395 0.456 0.510 0.721 0.883 1.02 82 95 105
110031 0.787 0.342 0.483 0.592 0.684 0.764 1.08 1.32 1.53 82 95 105
110036 0.914 0.456 0.645 0.789 0.912 1.02 1.44 1.77 2.04 82 95 105
110043 1.09 0.684 0.967 1.18 1.37 1.53 2.16 2.65 3.06 83 95 104
110052 1.32 0.912 1.29 1.58 1.82 2.04 2.88 3.53 4.08 83 95 104
110
110055 1.40 1.01 1.43 1.76 2.03 2.27 3.21 3.93 4.54 84 95 102
110062 1.57 1.37 1.93 2.37 2.73 3.06 4.32 5.30 6.11 86 95 101
110070 1.78 1.71 2.42 2.96 3.42 3.82 5.40 6.62 7.64 87 95 100
110078 1.98 2.28 3.22 3.95 4.56 5.10 7.21 8.83 10.2 87 95 100
110093 2.36 3.42 4.83 5.92 6.84 7.64 10.8 13.2 15.3 89 95 100
110109 2.77 4.56 6.45 7.89 9.12 10.2 14.4 17.7 20.4 90 95 100

Tools and Accessories
Nozzle Blanks
Hex Wrench Oblong Wrench
Shower Brush
Products
u Assembly Tools............................................................................................... 101
u Spray Nozzle Blanks........................................................................................ 101
u Lacing Wire Pliers and Piston Removal Tool..................................................... 102
u Tap and Die.................................................................................................... 102
u Shower Brush................................................................................................. 102
u Nozzle Adapters............................................................................................. 103
u Filtration ........................................................................................................ 105
100 Go to Main TOC

For PN and PT series spray nozzles
Hex wrench Oblong wrench

N6601 N-6602
Check nut N6759 Nozzle body removal

removal wrench tool.
For BF and BTK series spray nozzles

B39859
Wrench ratcheting, 1.0” hex.
Spray nozzle blanks
2127-1 S4-96
To disable BB series spray nozzles To disable PN and PT series self
or other with ¼” - 28 thread purging spray nozzles
B36132G00 (with O-ring) C14239

To disable JN and JJ series spray To disable BF nozzle
nozzles or other with 9/16” - 24 C29704
thread
To disable BT or BZ nozzle
A18163 42-108-002
To disable DF and DL series disc To disable PP series self purging
spray nozzles spray nozzles
A26892G06
To disable DF and DL series disc
spray nozzles
Go to Tools and Accessories Tab 101

Lacing wire pliers and piston removal tool
For PP series self purging spray nozzles
Lacing wire pliers Piston removal tool

A14879 A8½ - 169
Tap and die

For JN and JJ series spray nozzles
Thread plug tap Thread dies

A10281 – 9/16” - 24 thread A10282 – 9/16” - 24 thread
A25645 – 11/8” - 20 thread A27108 – 3/4” - 27 thread
A26264 – 11/8” - 20 thread
Shower brush
For aqua shuttle shower systems
Shower brush
N7618
Part numbers
1.5” Pipe Sch 10 - B28621G01
2.0” Pipe Sch 10 - B28621G02
2.5” Pipe Sch 10 - B28621G03
3.0” Pipe Sch 10 - B28621G04
4.0” Pipe Sch 10 - B28621G05
6.0” Pipe Sch 10 - B28621G06
102 Go to Tools and Accessories Tab

Nozzle Adapters
Nozzle Adapters
A nozzle adapter is a fitting that threads to the base of an existing shower pipe, and allows the use of a nozzle with
a different thread connection size than it was originally designed to accept. It may be desirable to install adapters if
the shower service or location is changing, if the shower uses hard to purchase nozzles, or for issues associated with
inventory reduction.
Original Type Connector Thread Connector Thread

Nozzle Part Shower Typical New Connector
of Shower Size (Connect to Size (Connect to Comment
Adapter Number Manufacturer Nozzle Type Length
Nozzle Nozzle Base) New Nozzle)
Straight
A26551 CVN JN, JJ, VF, FF 3/4-24 F 9/16-24 F 1.0” L
connection
Straight
A26727 CVN JN, JJ, VF, FF 3/4-24 F 9/16-24 F 1.0” L
connection
1.162”
Kadant Solutions Kadant brush
B28293 BF, BT JN, JJ, VF, FF 9/16-24 F Disc maximum
Division shower
diameter
Kadant Solutions Straight

A26628 JN, JJ, VF, FF SB, FF, QV 9/16-24 M 1/8 NPT F 0.57” L
Division connection
Straight
Kadant Solutions
B25431 PN, PT JN, JJ, VF, FF 1 1/8 -20 M 9/16-24 F connection with 0.875” L
Division
O-ring

B30348 PN, PT SB, FF, QV 1 1/8 -20 M 1/4 NPT F 0.75” L
Division connection

B30348G01 PN, PT SB, FF, QV 1 1/8 -20 M 1/8 NPT F 0.75” L
Division connection

B35908 PN, PT JN, JJ, VF, FF 1 1/8 -20 M 9/16-24 F 0.75” L
Division connection
Kadant Solutions
B27095G01 PP JN, JJ, VF, FF 42 base 9/16-24 F O-ring included 0.85” L
Division
Kadant Solutions
B27095G02 PP SB, FF, QV 42 base 1/4 NPT F O-ring included 0.85” L
Division
Kadant Solutions 64 degree deflec-

B29448 PP JN, JJ, VF, FF 42 base 9/16-24 F 1.75” L
Division tion, has O-ring

Nozzle Adapters
Original Type Connector Thread Connector Thread
Nozzle Part Shower Typical New Connector
of Shower Size (Connect to Size (Connect to Comment
Adapter Number Manufacturer Nozzle Type Length
Nozzle Nozzle Base) New Nozzle)
Straight
Kadant Solutions connection, with
B32110 PP SB, FF, QV 42 base 1/4 NPT F 6.375” L
Division O-ring and nozzle
extension
Kadant Solutions 1.0” L, 0.625”

A29330 QV, FF, SB BB 1/4 NPT M 1/4-28 F 90 degree elbow
Division HEX
1.020 diam-
A27771 Stamm Brush Shower SB, FF, QV Stamm brush disc 1/8 NPT F Disc eter x 0.25”
length
1.020 diam-
A29201 Stamm Brush Shower SB, FF, QV Stamm brush disc 1/4 NPT F Disc eter x 0.25”
length
Metric Stamm metric

B35850 Stamm JN, JJ, VF, FF M30 X 1.5 M 9/16-24 F 0.85” L
Threads brush shower
Brush Straight
B32943G01 Stamm SB, FF, QV 1 3/16-18 M 1/8 NPT F 0.875” L
Shower connection
Brush Straight
B32943G02 Stamm SB, FF, QV 1 3/16-18 M 1/4 NPT F 0.875” L
Shower connection
Brush Straight
B32943G03 Stamm JN, JJ, VF, FF 1 3/16-18 M 9/16-24 F 0.875” L
Shower connection
Brush Straight
C31499 Stamm PN, PT 1 3/16-18 M 1 1/8-20 F 1.42” L
Shower connection
Straight
A26897 Unknown Unknown JN, JJ, VF, FF 7/8-20 M 9/16-24 F 1.0” L
connection

Filtration
In-line single and duo filters
Kadant in-line filters can be provided in either a single or duplex
arrangement. A single in-line filter is normally used in applications Single Filters
Differential Pressure (PSID) vs. Flow (GPM)
where the flow can be interrupted or the filter can be bypassed
when the filter element is serviced. Duo filters are typically used
when continuous filtration is required. They can be operated with
HiFlo
either one or two filter housings on-line. Because of the inlet/outlet P
S
orientation, both the single and duo in-line filters can be easily, I 770C
quickly, and cost effectively installed in a horizontal run of pipe. D
490
770B
340
770A
GPM
Duo Filters – One Filter On Line

Differential Pressure (PSID) vs. Flow (GPM)
HiFlo
770A, B, C
P
S
I 340
490
D
490 Duo
GPM
Maximum Can Use Number of Design Minimum

Pipe Filter Element Area
Model Flow 2 2” x 12” 2” x 12” Pressure Installation Area
Connection1 Size (D x L) (sq. in.)
(gpm/lpm) Segments Segments (psi) (L x W x H)
340 3/4” 1.625” x 4.75” 22 15/60 N NA 300, 1000 6” x 4” x 14”
490 1” 2” x 12” 75 30/115 Y 1 300, 1000 7” x 9” x 24”
770A 2” 2” x 12” 75 40/151 Y 1 300, 1000 8” x 12” x 24”
770B 2” 2” x 24” 150 80/303 Y 2 300, 1000 8” x 12” x 48”
770C 2” 2” x 36” 225 120/454 Y 3 300, 1000 8” x 12” x 48”

Hi-Flo™
2” 3.25” x 40” 408 200/760 N NA 300, 1000 10” x 15” x 60”
Single 3
340 Duo 3/4” 1.625” x 4.75” 44 30/115 N NA 300, 1000 20” x 14” x 18”
490 Duo 1” 2” x 12” 150 60/230 Y 2 300, 1000 32” x 14” x 26”
770A Duo 2” 2” x 12” 150 80/303 Y 2 300, 1000 40” x 20” x 24”
770B Duo 2” 2” x 24” 300 160/606 Y 4 300, 1000 40” x 20” x 36”
770C Duo 2” 2” x 36” 450 240/908 Y 6 300, 1000 40” x 20” x 48”
Hi-Flo Duo 3 2” 3.25” x 40” 816 400/1520 N NA 300, 1000 44” x 34” x 60”
1
NPT connection is standard. Socket weld and lap joint flange connections are available.
2
Flow is based on the inlet and outlet connection size. Actual flow will be dependent upon the type of filter
media used and influent contaminant loading.
3
490 Use of Tri-Screen filter elements will increase filtration area from 408 in2 to 565 in2 per barrel. Tri-Screen flow rate is
limited to 120 gpm (454 lpm) for single and 240 gpm (908 lpm) for duo.

Filtration
Bottom entry single and duo filters
Kadant bottom entry filters are commonly used in vertical piping system
installations or in applications such as slurries where flow from the bottom to
the top will help mix the fluid and prevent particles from settling. Fluid enters
through a connection near the bottom of the filter housing and clean liquid exits
at the top. Like the in-line filter system, the fluid flows from the outside to the
inside of the filter screen, depositing debris on the exterior of the filter elements.
MegaFlo Series Filter

Single Barrel
Clean Pressure MegaFlo and ErGo Filter
Flow Per Barrel Drop
(PSID)
Pressure Drop
Single Barrel
10 0.0
8.0
Pressue Drop
20 0.1 MegaFlo Duo

6.0
(PIS)
30 0.2 4.0
40 0.3 2.0
50 0.5 0.0
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190
60 0.8 Flow per Single Barrel
70 1.0
80 1.3
90 1.7
100 2.1
110 2.5
120 3.0
130 3.5
140 4.1
150 4.7
160 5.4
170 6.1
180 6.8
190 7.6
Maximum Design Minimum

Pipe Filter Element Area
Model Flow 2 Pressure Installation Area
Connection1 Size (D x L) (sq. in.)
(gpm/lpm) (psi) (L x W x H)
MegaFlo 2” 3.25” x 40” 408 200/760 300, 100 8” x 12” x 58”
3 2”, 2½” 3.25” x 40” 816 400/1520 300, 1000 40” x 32” x 58”
MegaFlo Duo
1
2” plain end for socket weld connection standard on single units.
2” NPT standard on duo’s; lap joint flange connections available on all models.
2
Flow is based on the inlet and outlet connection size.
Actual flow will be dependent upon the filter media used and influent contaminants loading.
3
Use of Tri-Screen filter elements will increase filtration area from 408 in2 to 565 in2 per barrel.
Tri-Screen flow rate is limited to 120 gpm (454 lpm) for single and 240 gpm (908 lpm) for duo.
MegaFlo

Technical Information
The following information is a guide to help select the proper spray nozzle for the application and provide engineering
information to obtain peak performance for Kadant spray nozzles. Because of the large number of variables in
selecting the correct spray nozzle it is not always possible to determine the proper spray nozzle without testing or
simulation. Our technical staff, however, may be able to help determine the proper spray nozzle style and size for your
application.
Spray Characteristics
Flat Fan Spray
Flat fan spray nozzles distribute the liquid as a flat sheet and is formed by a straight-through elliptical orifice or by a
round orifice tangential to a deflected surface. Kadant supplies a large selection of fan angles and orifice sizes to meet
specific applications.
Go to Main TOC 107

Solid Jet Stream
For cleaning and cutting applications Kadant solid jet stream spray nozzles are offered in various size orifices and
materials to meet the individual application. They provide a straight steam of concentrated liquid and are used
whenever a concentrated impact is required.
Hollow Cone
This spray nozzle is typically a right angle nozzle and sprays a circular pattern in a cone shape. The pattern is achieved
by the liquid swirling inside the nozzle prior to the orifice.
Full Cone
The full cone spray nozzle sprays in a circular cone and a square pattern. They are used when a uniform large spray
area is required.
108 Go to Main TOC

Factors that affect spray characteristics
Pressure
Theoretically, flow is directly proportional to the square root of pressure and is represented by the equation below.
Therefore, this equation can be used to calculate other flows and pressure not listed in this catalog.
Flow A = Pressure A
Flow B Pressure B
Flow B = Flow A Pressure B

Pressure A
Example: Given the flow at 40 psi is 0.300 gpm. What is the flow at 80 psi?
Flow B = 0.300 80
40 = 0.424 gpm
Pressure B = Pressure A Flow B 2
Flow A
Example: Given the pressure of 60 psi and the flow is 1.220 gpm. What is the pressure at 1.410 gpm?
Pressure B = 60 1.410 2
1.220 = 80.1 psi
Specific Gravity
Flow rates specified in this catalog are for water which has a specific gravity, the ratio of the mass of a given volume of liquid
to the same mass of the same volume of water, is 1.00. To calculate the flow of liquids the below equation can be used.
Flow of Liquid = Flow Rate of Water 1

Specific Gravity
For example, for a specific gravity of 1.10:
1
4.0 gpm of water = 3.8 gpm of water
1.10 Specific Gravity
Shower Water Quality
Solids Loading PPM (Mg/L) Application of water strained with 100 mesh per Inch (40 per CM) mesh screen
0 – 50 Equivalent to filter fresh water
50 – 75 Usable in 0.040" (1 mm) and larger fixed orifice nozzles with minimal problems
75 – 100 Usable in 0.055” (1.4 mm) and larger fixed orifice nozzles with minimal problems
100 – 200 Usable in 0.125” (3 mm) and larger fixed orifice nozzles with minimal problems
200 – 500 Brush type shower recommended
500 – up Purgeable showers recommended
Go to Main TOC 109

Selection Guide
Spray Coverage
The spray coverage graph shown below is based on a straight sided spray pattern. At pressures below 40 psi the fan
angle degree will decrease and curve due to decreased acceleration.
mm Inch
25 1
51 2
76 3
Distance from Showered Surface
102 4
127 5
152 6
178 7
203 8
228 9
254 10
279 11
305 12
12 11 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 9 10 11 12 Inch
305 279 254 228 203 178 152 127 102 76 51 25 0 25 51 76 102 127 152 178 203 228 254 279 305 mm
Fan Nozzle Coverage
Spray widths in the above graph are based on a straight sided spray pattern. At lower pressures the pattern curves
inward and at higher pressures the fan pattern will increase as shown below.
Low Pressure
Average
High Pressure
110 Go to Main TOC

Flow of water through schedule 40 steel pipe
Flow Pressure Drop in PSI for Pipe Sizes (in 10 foot Length)
(GPM) 1/8” 1/4” 3/8” 1/2” 3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3” 3-1/2” 4” 5” 6” 8”
0.3 0.42
0.4 0.70 0.24
0.5 1.10 0.24
0.6 1.50 0.33
0.8 2.50 0.54 0.13
1.0 3.70 0.83 0.19 0.06
1.5 8.00 1.80 0.40 0.12
2.0 13.40 3.00 0.66 0.21 0.05
2.5 4.50 1.00 0.32 0.08
3.0 6.40 1.40 0.43 0.11

4.0 11.10 2.40 0.74 0.18 0.06
5.0 3.70 1.10 0.28 0.08
6.0 5.20 1.60 0.38 0.12
8.0 9.10 2.80 0.66 0.20 0.05
10.0 4.20 1.00 0.30 0.08
15.0 2.20 0.64 0.16 0.08
20.0 3.80 1.10 0.28 0.13 0.04
25.0 1.70 0.42 0.19 0.06
30.0 2.40 0.59 0.27 0.08
35.0 3.20 0.79 0.36 0.11 0.04
40.0 1.00 0.47 0.14 0.06
45.0 1.30 0.59 0.17 0.07
50.0 1.60 0.72 0.20 0.08
60.0 2.20 1.00 0.29 0.12 0.04
70.0 1.40 0.38 0.16 0.05
80.0 1.80 0.50 0.20 0.07
90.0 2.20 0.62 0.25 0.09 0.04
100.0 2.70 0.76 0.31 0.11 0.05
125.0 1.20 0.47 0.16 0.08 0.04
150.0 1.70 0.67 0.22 0.11 0.06
200.0 2.90 1.20 0.39 0.19 0.10
250.0 0.59 0.28 0.15 0.05
300.0 0.84 0.40 0.21 0.07
400.0 0.70 0.37 0.12 0.05
500.0 0.57 0.18 0.07
750.0 0.39 0.16 0.04
1000.0 0.68 0.27 0.07
2000.0 1.00 0.26
Go to Main TOC 111

Related Components
In-line filters
The simple filter design allows screens to be serviced

quickly and efficiently. In-line filters can be provided in
either a single or duplex arrangement. Single in-line filters
are generally used in applications where the flow can be
interrupted or when the filter can be bypassed for servicing
the filter element. Duo filters are typically used when
continuous filtration is required. In-line filters are available
in sizes from 3⁄4” to 21⁄2” with flow capacities up to 2,500
gpm.
Liquid filtration systems
Liquid filtration systems are used in a variety of applications

that processes or use fluids. Multiple barrel filter systems
may use internal or external sources of backwashing fluids
in the removal of contaminants from the process with flow
capacities up to 5,000 gpm. The ErGo™ multiple filter has a
unique design that provides an ergonomic and simple element
removal design for improved safety and ease of maintenance.
RotoFlex™ resource recovery strainer
The RotoFlex resource recovery strainer is used to effectively

and efficiently separate and reclaim process fluids and/
or solids. It uses a unique method of media cleaning to
keep the filter medium open by continuously flushing
contaminates from the surface. The RotoFlex resource
recovery strainer free-hanging backerless design maximizes
throughput and media life.
High- and low-pressure water cleaning systems
Kadant water cleaning systems are designed to use high-

pressure and/or low-pressure water to remove contaminants
from moving belts and rolls. Cleaning systems can also
incorporate water and contaminant removal systems,
utilizing vacuum.
112 Go to Main TOC

Related Components
Steam profiling
Profiling Steam-Foil® systems and Narrow Web DeCurler®

profiling provide moisture addition and curl control in
applications such as coating, laminating, printing, and
corrugating. Kadant’s steam profiling technology offers
an efficient and controllable non-contact method of
steam application.
Roll cleaning blades
Roll cleaning blades are used in a variety of industries

and applications including fiber processing, converting,
corrugating, printing, roofing, steel, and food processing.
Kadant offers more than 60 blade materials including
UHMW poly, fiberglass, carbon, and metal. Blade
thickness, bevel, and other features are customer-
engineered for the specific application requirements.
Roll cleaning blade holders and accessories
Roll cleaning blade holders feature quick and easy blade

changing, precise adjustability, and flexible models that
offer self-adjustability and uniform loading. Roll cleaning
blade holders are available in steel, stainless steel, and
lightweight composite materials.
Roll cleaning systems
Kadant roll cleaning systems provide a compact and

unique technology that offers improved cleaning results
for increased uptime and reduced maintenance costs in a
variety of industrial roll and belt clewaning applications
including drum flaking, fiber processing, filtration, and
metal processing. Roll cleaning systems provide precise
blade load adjustment and quick blade change.
Go to Main TOC 113

Parts Cross Reference
Instructions
The Parts Cross Reference is organized by Part Number. Locate the Part Number to
obtain OLD Nozzle Code and NEW Nozzle Code information.
114 Go to Main TOC

B36775G033 - C31969G02
OLD NEW OLD NEW OLD NEW
Part Part Part
Nozzle Nozzle Nozzle Nozzle Nozzle Nozzle
Number Number Number
Code Code Code Code Code Code
B36775G033 C3014 BB4UA033 C14506GP37 B1026 BFSH045156 C31724G10 B3008 BFSL030171
128C-020 C3001 BB4US020 C14506GP50 B1034 BFSH045171 C31724G11 B3009 BFSL030188
C14506GP25 B1016 BFSH015040 C14506GP32 B1022 BFSH060050 C31724G73 B3049 BFSL045033
C14506GP11 B1003 BFSH030188 C31724G25 B3019 BFSL015040 C31724G32 B3022 BFSL060050
Go to Main TOC 115

C31969G01 - C31726G08
Part Part Part
C31969G01 B6003 BFSL080063 C14506GP6 B1041 BTKS040 C29478G13 B2012 BZSH045094
C29478G72A B2070 BTCA028 C14506GP53 B1036 BTKS070 C29478G50 B2038 BZSH045171
C29478G77A B2071 BTCA046 B31377G52 B0008 BTRA018 C29478G83 B2078 BZSH045288
C29478G28A B2066 BTCA094 C29478G33A B2079 BZAH060070 C29478G32 B2027 BZSH060050
C29478G31A B2067 BTCA125 C29478G25 B2022 BZSH015040 C29478G66 B2050 BZSH060050
C29478G72 B2056 BTCS028 C29478G26 B2023 BZSH015055 C29478G14 B2013 BZSH060055
B31377G01 B0001 BTDA023 C29478G40 B2033 BZSH030110 C29478G16 B2015 BZSH060125
C14506GP72A B1076 BTKA028 C29478G11 B2010 BZSH030188 C29478G21 B2020 BZSH090078
C14506GP22A B1071 BTKA033 C29478G56 B2042 BZSH030203 C29478G19 B2018 BZSH090111
C14506GP6A B1069 BTKA040 C29478G34 B2029 BZSH030218 C31726G25 B4019 BZSL015040
C14506GP72 B1054 BTKS028 C29478G02 B2002 BZSH045055 C31726G43 B4030 BZSL030070
C14506GP22 B1015 BTKS033 C29478G03 B2003 BZSH045070 C31726G08 B4006 BZSL030094
116 Go to Main TOC

C31726G40 - B31658G09
Part Part Part
C31726G40 B4028 BZSL030110 C31726G17 B4015 BZSL060156 123E3-040-60 4E (E3) DFS060040
C31726G09 B4007 BZSL030125 C31726G70 B4047 BZSL060188 123E3-047-60 DFS060047
C31726G51 B4033 BZSL030144 C31726G71 B4048 BZSL070033 123E3-050-60 DFS060050
C31726G01 B4001 BZSL030156 C31726G18 B4016 BZSL082090 123E3-054-60 5EL (E3) DFS060054
C31726G56 B4035 BZSL030203 123E3-040-15 4B (E3) DFS015040 123E3-070-60 6E (E3) DFS060070
C31726G73 B4049 BZSL045033 123E3-028-30 2C (E3) DFS030028 123E3-219-60 DFS060219
C31726G03 B4003 BZSL045070 123E3-055-30 5C (E3) DFS030055 123E3-016-90 15F (E3) DFS090016
C31726G50 B4032 BZSL045171 123E3-180-30 DFS030180 123E3-055-90 5F (E3) DFS090055
C31726G65 B4042 BZSL060031 123E3-172-40 49G (E3) DFS040172 123E3-062-95 DFS095062
C31726G47 B4031 BZSL060040 123E3-028-45 2D (E3) DFS045028 123E3-055-100 5H (E3) DFS100055
C31726G32 B4022 BZSL060050 123E3-033-45 3D (E3) DFS045033 123E3-028-120 2N (E3) DFS120028
C31726G66 B4043 BZSL060050 123E3-040-45 4D (E3) DFS045040 B31658G01 DJDS023
C31726G14 B4012 BZSL060055 123E3-055-45 5D (E3) DFS045055 B31658G01 D1026 DJDS023
C31726G69 B4046 BZSL060118 123E3-028-60 2E (E3) DFS060028 B31658G08 DJDS035
C31726G16 B4014 BZSL060125 123E3-033-60 3E (E3) DFS060033 B31658G09 DJDS037
Go to Main TOC 117

B31658G04 - A30136G04
Part Part Part
B31658G04 DJDS040 B31658G45 DJRS024 S997-134-4 DLS000093
B31658G04 D1029 DJDS040 B31658G39 DJRS025 S997-134-9 DLS000093
B31658G12 DJDS050 B31658G46 DJRS032 L997-101-040 4C (L997) DLS030040
B31658G05 DJDS055 B31658G35 DJRS033 L997-101-055 DLS030055
B31658G05 D1030 DJDS055 B31658G38 DJRS035 L997-101-062 DLS030062
B31658G14 DJDS070 B31658G34 D1037 DJRS040 L997-101-125 DLS030125
B31658G71 DJPS005 B31658G36 DJRS055 L997-101-219 DLS030219
B31658G89 DJPS007 123E5-010 18 (E5) DJSS010 L997-100-031 23E (L997) DLS060031
B31658G70 DJPS010 123E5-018 DJSS018 L997-100-055 DLS060055
B31658G88 DJPS011 123E5-022 DJSS022 L997-100-062 20E (L997) DLS060062
B31658G81 DJPS020 123E5-070 6 (E5) DJSS070 L997-101-156 9C (L997) DLS060156
B31658G74 DJPS028 123E5-093 7 (E5) DJSS093 C37446G01 DLS080031
B31658G80 DJPS030 123E5-098 DJSS098 C37446G02 DLS080040
B31658G76 DJPS033 123E5-125 8 (E5) DJSS125 C37446G04 7R (C37446) DLS080093
B31658G78 DJPS035 123E5-156 9 (E5) DJSS156 C37446G05 37R (C37446) DLS080118
B31658G75 DJPS055 123E5-187 10 (E5) DJSS187 C33630G01 23F (C33630) DLS090031
B31658G30 DJRS005 123E5-191 DJSS191 C33630G02 4F (C33630) DLS090040
B31658G31 DJRS010 L997-100-000 DLS000000 C33630G06 8F (C33630) DLS090125
B31658G48 DJRS011 S997-134-1 DLS000031 C33630G07 9F (C33630) DLS090156
B31658G43 DJRS012 S997-134-6 DLS000031 C33630G05 37F (C33630) DLS909118
B31658G42 DJRS015 S997-134-2 DLS000040 A30136G01 DSS000028
118 Go to Main TOC

A30136G05 - B29899G64
Part Part Part
A30136G05 DSS000070 C37576G08 DSS080033 B29900G80 E1075 FF1/4HS120180
A30136G08 DSS000156 C37576G23 DSS080070 B29900G07 E1038 FF1/4LS120024
A30136G09 DSS000187 C37576G28 DSS080093 B29900G11 E1040 FF1/4LS120028
C37576G09 DSS015040 C37576G33 DSS080125 B29900G15 E1042 FF1/4LS120033
C37576G24 DSS015093 B31071G02 E1125 FF1/2HS120209 B29900G27 E1048 FF1/4LS120052
C37576G15 DSS030055 B31071G01 E1124 FF1/2LS120209 B29900G55 E1062 FF1/4LS120129
C37576G16 DSS045055 B29900G16 E1043 FF1/4HS120033 B36344G32 E7046 FF1/8HS090046
Go to Main TOC 119

B29899G68 - B28925G15
Part Part Part
B29899G68 E1034 FF1/8HS120156 B33405G35 E8003 FF4BLS120065 B31002G51 E1104 FHSL120116
B36344G31 E7045 FF1/8LS090046 B33405G43 E8021 FF4BLS120093 B31002G55 E1106 FHSL120129
B29899G15 E1007 FF1/8LS120033 B32884G28 E7014 FF9UHS120046 B31002G67 E1112 FHSL120156
B29899G19 E1009 FF1/8LS120040 B32884G27 E7013 FF9ULS120046 B31002G71 E1114 FHSL120161
B29899G23 E1011 FF1/8LS120046 B31002G04 E1081 FHSH120014 B31002G75 E1116 FHSL120173
B29899G39 E1019 FF1/8LS120073 B31002G20 E1089 FHSH120040 C30130G06 A2006 FL1/2S015188
B33404G12 E8006 FF2BHS120028 B31002G52 E1105 FHSH120116 C30130G05 A2005 FL1/2S035234
B33404G11 E8005 FF2BLS120028 B31002G76 E1117 FHSH120173 C29901G02 A1002 FL1/4S050109
B33404G19 E8007 FF2BLS120040 B31002G80 E1119 FHSH120180 C29901G04 A1003 FL1/4S050140
B33404G31 E8009 FF2BLS120057 B31002G84 E1121 FHSH120187 B28925G06 A0022 FL3/8S035109
B33404G35 E8001 FF2BLS120065 B31002G88 E1123 FHSH120219 B28925G07 A0023 FL3/8S035125
B33404G43 E8011 FF2BLS120093 B31002G03 E1080 FHSL120014 B28925G08 A0024 FL3/8S035141
B33405G12 E8016 FF4BHS120028 B31002G11 E1084 FHSL120028 B28925G20 A0036 FL3/8S035172
120 Go to Main TOC

C29901G03 - N6902
Part Part Part
C29901G03 A0010 FL3/8S050109 B36288G055 C2024 JJ9UR0A055 1123-2GP5 C0002 JN9U2S040
C29901G05 A0011 FL3/8S050140 B30986G07 C1036 JN4P0S028 1123-2GP4 C0001 JN9U2S055
C29901G06 A0012 FL3/8S050187 B30986G09 C1037 JN4P0S038 1123-2GP4 C0001 JN9U2S055
C29901G07 A0013 FL3/8S050234 B30986G04 C1018 JN4P0S055 B4-3031-34 223-1070 PN18USE120063
C29901G08 A0014 FL3/8S050265 B36132G13 C1026 JN9U0A010 M4-548-41 41 (M4) PN18USV000037
B36837G38 C2025 JJ1/4R0A028 B36132G07 C1023 JN9U0A028 M4-548-50 50 (M4) PN18USV000047
B36837G40 C2026 JJ1/4R0A033 B36132G06 C1022 JN9U0A033 N6918 50 (N69) PN18USV000047
B36828G028R C8000 JJ4BR0A028 B36132G04 C1021 JN9U0A055 M4-256-22 22 (M4) PN18USV030095
123Z023 C2001 JJ9UD0A023 B36132G15 C1028 JN9U0A060 M4-256-19 19 (M4) PN18USV030099
123Z028 C2002 JJ9UD0A028 B36132G03 C1020 JN9U0A070 M4-256-20 20 (M4) PN18USV040090
123Z033 C2003 JJ9UD0A033 123HSGP13 C1014 JN9U0S010 N6908 20 (N69) PN18USV040090
123Z040 C2004 JJ9UD0A040 123HSGP8 C1012 JN9U0S014 M4-256-21 21 (M4) PN18USV040093
123Z055 C2005 JJ9UD0A055 123HSGP14 C1015 JN9U0S016 N6907 18 (N69) PN18USV040097
1123JGP4 C0011 JJ9UD1A040 123HSGP18 C1035 JN9U0S020 M4-256-17 17 (M4) PN18USV040114
1123JGP6 C0013 JJ9UD2A033 123HSGP6 C1010 JN9U0S033 N6924 17 (N69) PN18USV040114
1123JGP13 C0008 JJ9UD2A040 123HSGP9 C1013 JN9U0S038 N6961 15 (N69) PN18USV040147
A25855GP1 C2017 JJ9UP0A005HP 123HSGP4 C1007 JN9U0S055 M4-256-11 11 (M4) PN18USV045166
B35907G008 C2022 JJ9UP0A008 123HSGP15 C1016 JN9U0S060 M4-256-29 29 (M4) PN18USV045182
A25855GP3 C2019 JJ9UP0A008HP 123HSGP3 C1006 JN9U0S070 M4-256-07 7 (M4) PN18USV060104
A25855 C2016 JJ9UP0A010HP 123HSGP1 C1001 JN9U0S125 M4-256-09 9 (M4) PN18USV060161
B35907G040 C2010 JJ9UP0A040 123HSGP11 C1003 JN9U0S250 N6903 3 (N69) PN18USV080107
B35907G055 C2011 JJ9UP0A055 B36478G040 C0016 JN9U1A040 N6904 4 (N69) PN18USV080131
A25855GP2 C2018 JJ9UR0A005HP B36478G055 C0017 JN9U1A055 M4-256-05 5 (M4) PN18USV080145
B36288G008 C2021 JJ9UR0A008 1123-5GP8 C0014 JN9U1S014 N6905 5 (N69) PN18USV080145
B36288G033 C2020 JJ9UR0A033 1123-5GP5 C0005 JN9U1S040 M4-256-40 40 (M4) PN18USV080194
B36288G035 C2031 JJ9UR0A035 1123-5GP4 C0004 JN9U1S055 M4-256-58 58 (M4) PN18USV100080
Go to Main TOC 121

M4-256-51 - C30033G92
Part Part Part
M4-256-51 51 (M4) PN18USV100098 C28560G07 7 (C28560) PT18USV060104 C30033G150 F2066 QVS025055
N6913 34 (N69) PN18USV120063 C28560G03 3 (C28560) PT18USV080107 C30033G152 F2068 QVS025062
B10738 A PPS000040 C28560G28 28 (C28560) PT18USV120125 C30033G158 F2074 QVS025141
B10955 U PPS000055 C37334G02 F4196 QTS015036 C30033G159 F2075 QVS025156
B24546 W PPS0100099 C30033G163 F2080 QVS015011 C30033G160 F2077 QVS025172
B10745 L PPS012080 C30033G164 F2081 QVS015013 C30033G161 F2078 QVS025187
B26144 Z PPS015040 C30033G165 F2082 QVS015015 C30033G162 F2079 QVS025203
B10747 B PPS030094 C30033G166 F2083 QVS015018 C30033G202 F2186 QVS035033
B10753 M PPS030133 C30033G167 F2084 QVS015021 C30033G115 F2027 QVS040011
B10754 N PPS030157 C30033G168 F2085 QVS015026 C30033G116 F2028 QVS040013
B10739 C PPS040094 C30033G169 F2086 QVS015031 C30033G117 F2029 QVS040015
B10748 E PPS045050 C30033G170 F2088 QVS015036 C30033G118 F2030 QVS040018
B24734 X PPS045060 C30033G171 F2089 QVS015040 C30033G119 F2031 QVS040021
B10746 F PPS045109 C30033G172 F2090 QVS015043 C30033G120 F2033 QVS040026
B10742 G PPS045125 C30033G173 F2091 QVS015052 C30033G121 F2034 QVS040031
B10755 P PPS045131 C30033G174 F2092 QVS015055 C30033G122 F2035 QVS040036
B10756 Q PPS045155 C30033G175 F2093 QVS015057 C30033G123 F2036 QVS040040
B10743 H PPS060080 C30033G176 F2094 QVS015062 C30033G124 F2037 QVS040043
B10757 I PPS060109 C30033G177 F2095 QVS015070 C30033G125 F2038 QVS040052
B10758 R PPS077070 C30033G178 F2096 QVS015072 C30033G126 F2039 QVS040055
B10744 J PPS090078 C30033G179 F2097 QVS015078 C30033G127 F2040 QVS040057
B10741 D PPS090099 C30033G180 F2099 QVS015093 C30033G128 F2041 QVS040062
B10740 K PPS100078 C30033G181 F2100 QVS015109 C30033G129 F2042 QVS040070
C28560G26 26 (C28560) PT18USV000040 C30033G139 F2053 QVS025011 C30033G130 F2044 QVS040072
122 Go to Main TOC

C30033G93 - C30022G08
Part Part Part
C30033G93 F2177 QVS050015 C30033G84 F2168 QVS065093 C30033G203 F2189 QVS095022
C30033G80 F2164 QVS065062 C30033G51 F2135 QVS080156 C30022G02 C6002 SB1/41S010
Go to Main TOC 123

C30022G10 - B36590G080
Part Part Part
C30022G10 C6010 SB1/41S033 C30022G37 C6037 SB1/81S156 C30705G18 C7018 SB4B1S172
C30022G12 C6012 SB1/41S038 C35867G01 C7023 SB2B1S016 C30705G19 C7019 SB4B1S187
C30022G20 C6020 SB1/41S061 C35867G05 C7027 SB2B1S040 B30538G04 C5004 SB9U3S020
C30022G30 C6030 SB1/41S093 C35867G10 C7032 SB2B1S070 B36467G023C TS1/8DNA023
C30022G32 C6032 SB1/41S107 C35867G11 C7033 SB2B1S078 B36590G023 D1046 TS1/8DNA023
C30022G44 C6041 SB1/41S203 C35867G17 C7039 SB2B1S156 B36590G030 TS1/8DNA030
B29894G01 C6045 SB1/43S040 C35867G20 C7042 SB2B1S203 B36467G035C TS1/8DNA035
B35005 C6043 SB1/81S109 C30705G15 C7015 SB4B1S125 B36590G070 D1054 TS1/8DNA070
124 Go to Main TOC

B28253G3 - B36232G22
Part Part Part
B28253G3 D1009 TS1/8DNB023 B36467G007R TS1/8RNA007 B36516G47 D1100 TS1/8RNA032
B28253G7 D1061 TS1/8DNB025 B36516G50 TS1/8RNA007 B37266G07 D1085 TS1/8RNA032032
B28253G1 D1007 TS1/8DNB028 B37266G21 TS1/8RNA007007 B36467G033R TS1/8RNA033
B28253G08 TS1/8DNB030 B36467G008R TS1/8RNA008 B36516G37 D1042 TS1/8RNA033
B28253G4 D1010 TS1/8DNB033 B36516G38 D1102 TS1/8RNA008 B37266G14 D1091 TS1/8RNA033033
B28253G09 TS1/8DNB035 B37266G01 D1079 TS1/8RNA008008 B36467G035R TS1/8RNA035
B28253G2 D1008 TS1/8DNB040 B36516G31 D1095 TS1/8RNA010 B37266G15 D1092 TS1/8RNA035035
B28253G11 TS1/8DNB042 B37266G10 D1087 TS1/8RNA010010 B36467G040R TS1/8RNA040
B28253G13 TS1/8DNB050 B36516G49 TS1/8RNA011 B37266G16 D1093 TS1/8RNA040040
B28253G5 D1011 TS1/8DNB055 B36467G012R TS1/8RNA012 B36467G048R TS1/8RNA048
B28253G14 TS1/8DNB060 B36516G44 D1097 TS1/8RNA012 B36516G48 TS1/8RNA048
B28253G15 TS1/8DNB070 B37266G02 D1080 TS1/8RNA012012 B37266G19 TS1/8RNA050050
B28253G16 TS1/8DNB080 B37266G18 TS1/8RNA014014 B36467G055R TS1/8RNA055
B36467G005S TS1/8PNA005 B36467G015R TS1/8RNA015 B36516G36 D1101 TS1/8RNA055
B36467G007S TS1/8PNA007 B36516G43 D1062 TS1/8RNA015 B37266G17 D1094 TS1/8RNA055055
B36467G008S TS1/8PNA008 B37266G11 D1088 TS1/8RNA015015 B28253G33 D1040 TS1/8RNB028
B36467G010S TS1/8PNA010 B36467G016R TS1/8RNA016 B28253G34 D1038 TS1/8RNB040
B36467G011S TS1/8PNA011 B36516G45 D1098 TS1/8RNA016 B36232G08 TS1/8SNA010
B36467G015S TS1/8PNA015 B36467G018R TS1/8RNA018 B36232G29 TS1/8SNA012012012
B36467G020S TS1/8PNA020 B36467G020R D1064 TS1/8RNA020 B36232G30 TS1/8SNA015015015
B36467G028S TS1/8PNA028 B36467G024R TS1/8RNA024 B36232G16 D1039 TS1/8SNA020
B36467G033S TS1/8PNA033 B36467G025R TS1/8RNA025 B36232G14 TS1/8SNA023
B36467G040S TS1/8PNA040 B37266G08 TS1/8RNA025025 B36232G38 TS1/8SNA024
B36467G048S TS1/8PNA048 B36467G028R TS1/8RNA028 B36232G15 D1041 TS1/8SNA025
B28253G6 D1012 TS1/8PNB010 B37266G06 D1084 TS1/8RNA028028 B36232G39 TS1/8SNA025025
B36467G005R TS1/8RNA005 B36467G030R TS1/8RNA030 B36232G01 TS1/8SNA028
B36516G32 D1096 TS1/8RNA005 B36516G41 D1058 TS1/8RNA030 B36232G17 D1068 TS1/8SNA030
B37266G09 D1086 TS1/8RNA005005 B37266G13 D1090 TS1/8RNA030030 B36232G13 TS1/8SNA030030
B37266G20 TS1/8RNA006006 B36467G032R TS1/8RNA032 B36232G22 TS1/8SNA032
Go to Main TOC 125

B36232G03 - B39511G22
Part Part Part
B36232G03 D1060 TS1/8SNA033 B28252G23 TS1/8SNB032 A30064G01 TS2BRNA008008
B36232G07 TS1/8SNA034015015 B28252G03 D1019 TS1/8SNB033 A30329G31 TS2BRNA010
B36232G36 TS1/8SNA035035 B28252G19 D1069 TS1/8SNB035035 A30064G10 D1112 TS2BRNA010010
B36232G23 TS1/8SNA036 B28252G36 TS1/8SNB036 A30329G49 TS2BRNA011
B36232G19 D1077 TS1/8SNA040020 B28252G34 TS1/8SNB040020 A30064G02 D1104 TS2BRNA012012
B36232G26 TS1/8SNA055 B28252G27 TS1/8SNB055 A30064G11 D1113 TS2BRNA015015
B28252G08 D1024 TS1/8SNB010 A31532G23 TS2BDNA023 A30329G35 TS2BRNA028
B28252G37 TS1/8SNB012 A31532G25 TS2BDNA025 A30064G06 D1108 TS2BRNA028028
B28252G39 TS1/8SNB012012012 A31532G28 TS2BDNA028 A30329G41 TS2BRNA030
B28252G04 D1020 TS1/8SNB014 A31532G30 TS2BDNA030 A30064G13 D1115 TS2BRNA030030
B28252G10 D1014 TS1/8SNB025020 A30329G32 TS2BRNA005 A30064G17 D1119 TS2BRNA055055
B28252G12 D1016 TS1/8SNB025020015 A30064G09 D1111 TS2BRNA005005 B39511G08 TS2BSNB010
B28252G24 TS1/8SNB025025 A30064G20 TS2BRNA006006 B39511G35 TS2BSNB012
B28252G01 D1013 TS1/8SNB028 A30329G50 TS2BRNA007 B39511G38 TS2BSNB012012012
126 Go to Main TOC

B39511G07 - B28253G75
Part Part Part
B39511G07 TS2BSNB015015 B36467G035CF TS3/8DFA035 B36467G033SF TS3/8PFA033
B39511G09 TS2BSNB020015 B36467G050CF TS3/8DFA050 B28251G70 TS3/8PFB005
B39511G15 TS2BSNB025 B28251G3 TS3/8DFB023 B28251G82 TS3/8PFB012
B39511G33 TS2BSNB060 B36467G005SF TS3/8PFA005 B28253G70 TS3/8PNB005
B36467G023CF TS3/8DFA023 B36467G024SF TS3/8PFA024 B28253G78 TS3/8PNB025
Go to Main TOC 127

B28253G77 - B36233G15
Part Part Part
B28253G77 TS3/8PNB035 B37262G08 D1078 TS3/8RFA025025 B28251G46 TS3/8RFB032
B28253G72 TS3/8PNB040 B36467G028RF D1066 TS3/8RFA028 B28251G36 TS3/8RFB033
B28253G86 TS3/8PNB048 B36518G35 TS3/8RFA028 B28251G38 TS3/8RFB035
B28253G74 TS3/8PNB055 B37262G06 D1142 TS3/8RFA028028 B28251G33 TS3/8RFB040
B36467G005RF TS3/8RFA005 B36467G030RF D1067 TS3/8RFA030 B28251G47 TS3/8RFB048
B36518G32 TS3/8RFA005 B36518G41 TS3/8RFA030 B28251G35 TS3/8RFB055
B37262G09 D1144 TS3/8RFA005005 B37262G13 D1148 TS3/8RFA030030 B28253G30 TS3/8RNB005
B37262G20 TS3/8RFA006006 B36467G032RF TS3/8RFA032 B28253G49 TS3/8RNB007
B36467G007RF TS3/8RFA007 B36518G47 TS3/8RFA032 B28253G37 TS3/8RNB008
B36518G50 TS3/8RFA007 B37262G07 D1143 TS3/8RFA032032 B28253G31 TS3/8RNB010
B37262G01 D1137 TS3/8RFA008008 B36467G035RF TS3/8RFA035 B28253G44 TS3/8RNB016
B37262G10 D1145 TS3/8RFA010010 B36467G040RF TS3/8RFA040 B28253G45 TS3/8RNB024
B36467G012RF TS3/8RFA012 B36467G048RF TS3/8RFA048 B28253G46 TS3/8RNB032
B36518G44 TS3/8RFA012 B36518G48 TS3/8RFA048 B28253G36 TS3/8RNB033
B37262G02 D1138 TS3/8RFA012012 B37262G19 TS3/8RFA050050 B28253G38 TS3/8RNB035
B36467G015RF D1063 TS3/8RFA015 B36518G36 TS3/8RFA055 B28253G35 TS3/8RNB055
B36518G43 TS3/8RFA015 B37262G17 D1152 TS3/8RFA055055 B36233G08 TS3/8SFA010
B37262G11 D1146 TS3/8RFA015015 B28251G31 TS3/8RFB005 B36233G24 TS3/8SFA012
B36467G016RF TS3/8RFA016 B28251G49 TS3/8RFB007 B36233G29 TS3/8SFA012012012
B36518G45 TS3/8RFA016 B28251G37 TS3/8RFB008 B36233G04 TS3/8SFA014
B36467G020RF D1065 TS3/8RFA020 B28251G44 TS3/8RFB016 B36233G11 TS3/8SFA018018
B37262G05 D1141 TS3/8RFA024024 A30376 TS3/8RFB028 B36233G05 TS3/8SFA023023
128 Go to Main TOC

B36233G10 - B39512G17
Part Part Part
B36233G10 TS3/8SFA025020 B28250G13 TS3/8SFB030030 B37101G04 D1123 TS6BRFA020020
B36233G39 TS3/8SFA025025 B28250G23 TS3/8SFB032 KSD004890G46 TS6BRFA024
B36233G27 TS3/8SFA080 B28250G25 TS3/8SFB201 B37101G19 TS6BRFA050050
B36233G28 TS3/8SFA093 KSD004890G32 TS6BRFA005 KSD004890G36 TS6BRFA055
B36233G21 TS3/8SFA114 B37101G09 D1128 TS6BRFA005005 B39512G08 TS6BSFB010
B36233G32 TS3/8SFA125 B37101G20 TS6BRFA006006 B39512G35 TS6BSFB012
B36233G33 TS3/8SFA156 KSD004890G50 TS6BRFA007 B39512G38 TS6BSFB012012012
B36233G40 TS3/8SFA201 B37101G21 TS6BRFA007007 B39512G04 TS6BSFB014
B28250G8 TS3/8SFB010 KSD004890G38 TS6BRFA008 B39512G22 TS6BSFB015
B28250G37 TS3/8SFB012 B37101G01 D1120 TS6BRFA008008 B39512G07 TS6BSFB015015
B28250G16 TS3/8SFB020 B37101G18 TS6BRFA014014 B39512G14 TS6BSFB023
Go to Main TOC 129

B39512G13 - C30132G17
Part Part Part
B39512G13 TS6BSFB030030 C30132G82 F3102 VF1/2S025078 C30132G50 F3070 VF1/2S050141
C30132G118 F3030 VF1/2S000297 C30132G66 F3086 VF1/2S040109 C30132G34 F3054 VF1/2S065172
130 Go to Main TOC

C30132G18 - C35287G11
Part Part Part
Go to Main TOC 131

C29491G32 - C29491G351
Part Part Part
132 Go to Main TOC

C29491G353 - C29491G239
Part Part Part
Go to Main TOC 133

C29491G241 - C30021G19
Part Part Part
C29491G57 F0320 VF1/8S090057 C32910G503 F7022 VF2BS015125 C30021G29 F1029 VF3/8S040078
134 Go to Main TOC

C30021G20 - C31677G63
Part Part Part
C30021G20 F1020 VF3/8S050109 B36713G043 F7033 VF4BS065043F C31677G25 F5089 VF9US025093
C30021G25 F1025 VF3/8S050203 C32910G256 F7016 VF4BS080052 C31677G30 F5094 VF9US025187
C30021G27 F1027 VF3/8S050266 C31971G01 F7001 VF4BS090010F C31677G200 F5164 VF9US030040
C30021G09 F1009 VF3/8S080025 C31677G01 F5001 VF9US015026 C31677G40 F5104 VF9US040031
C32910G504 F7023 VF4BS015125 C31677G11 F5021 VF9US015109 C31677G50 F5114 VF9US040141
B36713G021 F7029 VF4BS065021F C31677G21 F5085 VF9US025055 C31677G60 F5124 VF9US045156
Go to Main TOC 135

C31677G64 - C30477G03
Part Part Part
C31677G64 F5128 VF9US050043 C31677G104 F5015 VF9US065203 C31677G144 F5059 VF9US095072
C31677G84 F5148 VF9US065011 C31677G124 F5037 VF9US080141 C30477G163 F4080 VHS000010
136 Go to Main TOC

C30477G04 - C30477G120
Part Part Part
C30477G04 F4004 VHS015043 C30477G43 F4135 VHS040057 C30477G81 F4173 VHS060125
Go to Main TOC 137

C30477G121 - C31823G172
Part Part Part
C30477G121 F4034 VHS080093 C30477G160 F4077 VHS110078 C31823G116 F6028 VZ1/4S025109
C30477G135 F4049 VHS095018 C31823G70 F6299 VZ1/4S015026 C31823G138 F6052 VZ1/4S040057
138 Go to Main TOC

C31823G174 - C31823G109
Part Part Part
C31823G174 F6092 VZ1/4S050078 C31823G24 F6164 VZ1/4S073056 C31823G298 F6228 VZ1/4S095141
Go to Main TOC 139

C31823G111 - C31823G289
Part Part Part
140 Go to Main TOC

C31823G291 - C31823G323
OLD NEW
Part
Nozzle Nozzle
Number
Code Code
C31823G291 F6221 VZ1/8S095078
C31823G293 F6223 VZ1/8S095093
C31823G295 F6225 VZ1/8S095109
C31823G297 F6227 VZ1/8S095141
C31823G299 F6229 VZ1/8S095156
C31823G301 F6232 VZ1/8S095172
C31823G303 F6234 VZ1/8S095187
C31823G305 F6236 VZ1/8S095203
C31823G400 F6268 VZ1/8S110022
C31823G307 F6238 VZ1/8S110026
C31823G309 F6240 VZ1/8S110031
C31823G311 F6243 VZ1/8S110036
C31823G313 F6245 VZ1/8S110043
C31823G315 F6247 VZ1/8S110052
C31823G63 F6292 VZ1/8S110055
C31823G317 F6249 VZ1/8S110062
C31823G65 F6294 VZ1/8S110070
C31823G319 F6251 VZ1/8S110078
C31823G321 F6254 VZ1/8S110078
C31823G323 F6256 VZ1/8S110109
Go to Main TOC 141

www.kadant.com Kadant is a global supplier of high-value, critical components and engineered systems used in process industries worldwide.
K A D A N T S O L U T I O N S DIVISION Spray Nozzle Catalog-4000 (US) 04/2020

35 Sword Street Tel: +1 508-791-8171 Replaces: All Previous Versions
Auburn, MA 01501 USA Email: info@kadant.com © 2020 Kadant Solutions Divisionn

Spray Nozzles Catalog

Uploaded by

Copyright:

Available Formats

Spray Nozzles Catalog

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Spray Nozzles Catalog

Uploaded by

Copyright:

Available Formats

DOCTOR, CLEANING, FILTRATION

Spray Nozzle Catalog

Example ordering information

Nozzle Description Description Description Description

Examine the photo and dimensional drawing

Check performance figures and specifications

• Series JN • Series JJ • Series BB • Series SB

• Series VF • Series V • Series FF • Series FH • Series FL

Brush Shower Fan/Jet Nozzles.............................................................................................. 43

• Series BF • Series BT • Series BZ

Disc Fan/Jet Nozzles............................................................................................................... 56

• Series DF • Series DJ • Series DL • Series DS

Self Purging Nozzles.............................................................................................................. 70

• Series PN • Series PT • Series PP

Trim Squirt Nozzles................................................................................................................ 80

• Series TG and TT • Series TS • VersaTrim System

Quick Connect Nozzles.......................................................................................................... 89

Tools and Accessories.......................................................................................................... 100

Technical Information and Related Products.................................................................... 107

Parts Cross Reference.......................................................................................................... 114

1. Prevent thread galling during nozzle installation and removal.

3. Accelerate nozzle installation, removal, and inspection.

Galling and nozzle wear

ArresTech spray nozzle enhancement stops thread galling — speeds installation

ArresTech spray nozzle enhancement extends nozzle life — minimizes fouling

Construction Base, Nozzle*

**O-Ring only included with ArresTech plated nozzles that

6 Go to Jet Nozzles Tab

Flow Rate (Gallons per Minute)

Go to Jet Nozzles Tab 7

Flow Rate (Liters per Minute)

8 Go to Jet Nozzles Tab

**O-Ring only included with 9/16” – 24 threads.

Go to Jet Nozzles Tab 9

Flow Rate (Liters per Minute)

10 Go to Jet Nozzles Tab

Nozzle Characteristics Components

Go to Jet Nozzles Tab 11

Flow Rate (Gallons per Minute)

Flow Rate (Liters per Minute)

12 Go to Jet Nozzles Tab

1.13" or 1.625" 1.13" or 1.625" or 2.13"

Go to Jet Nozzles Tab 13

Flow Rate (Liters per Minute)

14 Go to Jet Nozzles Tab

Wrench Flat Wrench Flat

Hex Size Hex Size 1.00" 1.00"

NPT and BSPT 0.438"

Fan Nozzle Ordering Information Construction Material Code

16 Go to Fan Nozzles Tab

Flow Rate (Gallons per Minute)

Go to Fan Nozzles Tab 17

Flow Rate (Gallons per Minute)

18 Go to Fan Nozzles Tab

Flow Rate (Gallons per Minute)

Go to Fan Nozzles Tab 19

Flow Rate (Gallons per Minute)

20 Go to Fan Nozzles Tab

Flow Rate (Liters per Minute)