Your One Stop Shop for Parts ENGINES & PARTS

Briggs & Stratton Engines - Gasoline

Briggs & Stratton’s top-of-the-line engines have proven performance
in the pressure washer industry.
• Easy, quick starting • Super quiet muffler
• Large fuel tank • OilGuard® low-oil shutdown
New Part No. Part No. HP Shaft Diameter Starter Charge Rate Fuel Tank Model No.

VANGUARD, 9.802-325.0 5-0309 16 1" Electric 20 Amp N/A Vanguard

V-TWIN OHV 8.715-067.0 5-0316 21 1" Electric N/A N/A Vanguard
NOTE: Mufflers for the above engine are sold separately. See Briggs & Stratton Engine Parts section below.

Power to complete any job quicker and easier with less wear and tear
on major engine components.
• State-of-the-art carburetion system • Cast/sintered iron sleeve
• 30% quieter muffler than competition • OilGuard® low-oil shutdown
New Part No. Part No. HP Shaft Diameter Starter Charge Rate Fuel Tank Model No.

8.709-877.0 5-0313 11 1" Recoil N/A 2 gal Vanguard

8.709-879.0 5-0314 13 1" Recoil N/A 2 gal Vanguard
OHV VANGUARD 8.709-896.0 339405 5.5 One Pull Starting Intek-Pro

Briggs & Stratton Engine Parts

Genuine Briggs & Stratton replacement parts are available. Please provide engine model/type/
code to assure proper fit of replacement parts.

• Authorized manufacturer replacement parts • Don’t settle for cheap imitations

Part No. Original No. Description
8.701-826.0 8.701-823.0
8.701-826.0 091960 Briggs 16/18 HP Vanguard, Oil Filter
8.701-820.0 091950 Briggs 5 HP Industrial, Air Filter
8.701-821.0 091952 Briggs 8 or 11 HP IC, Air Filter
8.701-820.0 8.701-823.0 091954 Briggs 16/18 HP Vanguard, Air Filter

Honda Engine Parts

Original Honda replacement parts from the factory. Filters are a great add-on to every
service order.
• Authorized manufacturer replacement parts • Don’t settle for cheap imitations

8.701-764.0 8.701-830.0
Part No. Original No. Description
8.701-830.0 091970 Honda 18/20 HP, Oil Filter
8.701-764.0 091746 Honda GX160, Air Filter
8.701-780.0 091775 Honda GX240/270, Air Filter
8.701-781.0 091777 Honda GX340, Air Filter
8.701-782.0 091779 Honda GX610/620, Air Filter (old style)
8.701-783.0 091779A Honda GX610/620, Air Filter (new style)
8.701-782.0 8.701-783.0

12 VDC Starter Solenoid Keyed Ignition Switch - 12 VDC

Universal type used on many lawn and garden tractors and mowers. • Universal style/5 pole
• Off-On-Start (spring back to On)
• Panel nut and star-lock washer
• Double terminal – 5/16" - 24 studs
• Two keys included
• Same as used on 16 HP
B & S Vanguard engines • Has two auxiliary circuits
• Rated for intermittent duty • Universal - used for small engine controls
(i.e. for starting small gasoline engines) on many lawn and garden tractors, mowers

Part No. Original No. Description

Part No. Original No. Description 8.701-689.0 091350 Keyed Ignition Switch, 5 pole
8.701-691.0 091357 12V DC Starter 8.701-690.0 091351 Keyed Ignition Switch, 6 pole

91
 MOTORS
Small Engine Test Equipment Couplers Built by Browning or Lovejoy
Listed as individual coupler sections (half) to allow flexibility in design.
Spark Tester For complete coupler select:
• Handy tool allows safe, easy visual Bore size for motor + Bore size for pump + Spider = Complete Coupler
inspection of ignition output NOTE: Select halves from same series as listed in groups below
• Connects BETWEEN plug & plug wire (i.e. All “090/095”, “099/100”)

• Totally contained spark

• Engine will run with tester attached
• Neon test light verifies proper ignition

Part No. Original No. Description Bore
Part No. Orig. No. Description
090/095 Series: Up to 3 HP Electric or 4 HP Gas
8.701-680.0 091126 Spark Tester 8.709-620.0 336031 Coupler Half 24mm
8.709-640.0 336050 Coupler Half 5/8" (090)
8.709-634.0 336044 Coupler Half 3/4" (090)
Compression Tester • Designed for small engines 8.709-635.0 336045 Coupler Half 15/16" (090)
• 2-1/2" dial reads up to 300 PSI 8.709-639.0 336049 Buna Spider for 090 (STD)
• 12" flexible hose to reach
spark plug holes 099/100 Series: Up to 5-7 1/2 HP Electric or 5-13 HP Gas
• Adapters for 14mm and 18mm 8.709-626.0 336038 Coupler Half 3/4" (100)
spark plug holes 8.709-638.0 336048 Coupler Half 15/16" (099)
• Built-in pressure holding/ release valves 8.709-625.0 336037 Coupler Half 20mm(100)
8.709-627.0 336039 Coupler Half 24mm (099)
Part No. Orig. No. Description 8.709-628.0 336039A Coupler Half 24mm (100)
8.701-682.0 091133 Comp Tester 8.709-629.0 336040 Coupler Half 1" (100)
8.709-632.0 336042A Coupler Half 1-1/8" (100)
8.709-637.0 336047 Coupler Half 1-3/8" (100)
8.709-633.0 336043 Buna Spider for 099/100 (STD)
Wireless Tachometer • Terrific service aid for
1-cylinder engines
• Just hold built-in antenna near spark plug Pulleys
• Excellent for setting GPM
on pressure washers; accuracy within 2% Fits Interpump, General and Admiral XLS, XDS Series pumps, plus XD3040,
of full scale
XD3047, XD3055 and XD3065.
• Two scales: 0-5000 RPM
or 0-15,000 RPM
• Solid state electronics • Double groove
• Requires 9 volt battery • 24mm bore
(not included) • 2 x A groove

Part No. Orig. No. Description
Part No. Original No. OD
8.701-681.0 091132 Wireless Tach
8.711-115.0 376304 4.0"
8.711-116.0 376305 5.5"
8.711-117.0 376306 6.3"

Reference / Calculation Guide

Questions and Answers
Conversion Factors
Q: How fast do I turn my pump to give me a
1 inch = 25.4 mm 1 gal H20 = 8.33 lbs 1 gal = 3.79 liter 1 kg = 2.205 lbs desired GPM?
1 cm = 0.394 inch 1 oz = 23.35 gram 1 liter = 0.2642 gal 1 KW = 1.341 HP A: Required RPM = (desired GPM x Rated RPM)
Rated GPM

Horsepower (HP) Equations

Q: What size pump pulley do I use to get a
GPM x PSI HP x 1460 HP x 1460 certain RPM?
HP = PSI = GPM =
1460 GPM PSI A: Pump Pulley Diameter =
Motor Pulley Diameter x Motor RPM
Pump RPM

92
 Your One Stop Shop for Parts MOTORS
Baldor Motors - C-Face Open Drip Proof (ODP)
Built to “Industrial” Specifications. “S”IndicatesMotorHasOn/OffSwitch.“B”Indicatesmotor
is black.
Motor Shaft Bolt Frame/ Full Load
Part No. Orig. No. HP/S RPM Dia Circle C-Face Amps Voltage

Single Phase
8.709-719.0 337255 3/4 1725 5/8" 5 7/8" 56/56C 10.2/5.4/5.1 115/208/230
8.709-743.0 337302 1.5 1725 5/8" 5-7/8" 56/56C 14/7 115/230
8.709-744.0 337304 1.5 3450 5/8" 5-7/8" 56/56C 13.2/6.6 115/230
8.709-712.0 337232B 1.5S 1725 5/8" 5-7/8" 56/56C 14/7 115/230
8.709-713.0 337234B 1.5S 3450 5/8" 5-7/8" 56/56C 13.2/6.6 115/230
8.709-747.0 337311 2.0 1725 5/8" 5-7/8" 56/56C 18.4/9.2 115/230
8.709-749.0 337313 2.0 3450 5/8" 5-7/8" 56/56C 17.6/8.8 115/230
8.709-714.0 337240B 2.0S 1725 5/8" 5-7/8" 56/56C 18.4/9.2 115/230
8.709-715.0 337242B 2.0S 3450 5/8" 5-7/8" 56/56C 17.6/8.8 115/230
8.709-752.0 337321 3.0 1725 1-1/8" 7-1/4" 184TC 32/16 115/230
8.709-754.0 337323B 3.0 3450 5/8" 5-7/8" 56/56C 13.7/12.5 208/230
8.709-722.0 337263B 3.0S 3450 5/8" 5-7/8" 56/56C 13.7/12.5 208/230
8.709-723.0 337264B 3.0 1725 5/8" 5-7/8" 184CZ/56C 32/16 115/230
8.709-724.0 337265B 3.0S 1725 5/8" 5-7/8" 184CZ/56C 32/16 115/230
8.709-725.0 337266B 3.0S 1725 1-1/8" 7-1/4" 184TC 32/16 115/230
8.709-726.0 337267B 4.0 1725 1-1/8" 7-1/4" 184TC 17.5/16 208/230
8.709-727.0 337268B 4.0 1725 5/8" 5-7/8" 182TCZ/56C 17.5/16 208/230
8.709-728.0 337269B 4.0 3450 5/8" 5-7/8" 56/56C 38/21/19 115/208/230
8.709-730.0 337271B 5.0 1725 1-1/8" 7-1/4" 184TC 25/23 208/230
8.709-731.0 337272B 5.0 3450 5/8" 5-7/8" 56HCY/56C 24/23 208/230
8.709-733.0 337273B 6.0 1725 1-1/8" 7-1/4" 213C/182TC 26 230
8.709-734.0 337275B 7.5 1725 1-1/8" 7-1/4" 215C/182TC 36/33 208/230
Three Phase Motors
8.751-797.0 337520 3.0 1760 1-1/8" 7-1/4" 182TC 8.4/4.2 230/460
8.751-443.0 337530 5.0 1750 1-1/8" 7-1/4" 184TC 14/13.2/6.6 208/230/460
8.751-798.0 337535 7.5 1770 1-3/8" 7-1/4" 213TC 20.4/19.4/9.7 208/230/460
8.709-825.0 337536 7.5 1725 1-1/8" 7-1/4" 215TCZ/184TC 23/22/11 208/230/460
NOTE: Amp draw ratings require adequate wire size and full voltage to apply. Full load Amp ratings apply only when full rated voltage
and properly sized wiring is used to supply power to motor.

Baldor Motors - Rigid Base Open Drip Proof (ODP)

Motor Shaft Motor Full Load

Part No. Orig. No. HP/S RPM Dia Frame Amps Voltage

Single Phase
8.709-742.0 337301 1.5 1725 5/8" 56 14/7 115/230
8.709-748.0 337312 2.0 3450 5/8" 56 17/8.8 115/230
8.709-746.0 337310 2.0 1725 5/8" 56 18.4/9.2 115/230
8.709-751.0 337320 3.0 1725 1-1/8" 184T 32/16 115/230
8.709-759.0 337331 5.0 3450 5/8" 56 23-21 208/230
8.709-757.0 337329 5.0 1725 1-1/8" 184T 25/23 208/230
9.802-331.0 337279 7.5 1725 1-3/8" 215T 3-31 208-230
Three Phase Motors
3 PHASE 8.751-013.0 337529 5.0 1750 1-1/8" 184T 14/13.2/6.6 208/230/460
184T FRAME
8.751-014.0 337534 7.5 1770 1-3/8" 213T 20.4/19.4/9.7 208/230/460
8.751-015.0 337540 10.0 1770 1-3/8" 215T 25/12.5 230/460
8.751-006.0 337545 15.0 1760 1-5/8" 254T 35.4/17.7 230/460
NOTE: Amp draw ratings require adequate wire size and full voltage to apply. Full load Amp ratings apply only when full rated.

93
 MOTORS
Baldor Motors - Totally Enclosed Fan Cooled (TEFC)
Featuring heavy gauge steel frames, ball bearings, welded base and “snap-action” starting
for reliability. Built to industrial specifications.

Shaft Bolt Frame/ Full Load

Part No. Original No. HP RPM Dia Circle C-Face Amps Voltage

Single Phase
8.709-766.0 337351 1.5 1725 5/8" None 56 12/6 115/230
8.709-767.0 337352 1.5 1725 5/8" 5-7/8" 56C 12/6 115/230
8.709-769.0 337354 1.5 3450 5/8" 5 7/8" 56C 13.2/6.6 115/230
8.709-774.0 337363 2.0 3450 5/8" 5-7/8" 56C 17/8.5 115/230
8.709-773.0 337362 2.0 3450 5/8" None 56 17/8.5 115/230
8.709-772.0 337361 2.0 1725 7/8" 5-7/8" 145TC 8.3 230 only
8.709-776.0 337370 3.0 1725 1-1/8" None 184T 13.2 230
8.709-778.0 337373 3.0 3450 5/8" None 56 12.5 230
8.709-779.0 337374 3.0 3450 5/8" 5-7/8" 56C 13.8-12.5 208-230
8.709-783.0 337379 5.0 1725 1-1/8" None 184T 23 230
8.709-784.0 337380 5.0 1725 1-1/8" 7-1/4" 184TC 23 230
8.709-780.0 337376 5.0 3450 1-1/8" None 184T 19.5 230
8.709-781.0 337377 5.0 3450 1-1/8" 7-1/4" 184TC 19.5 230
8.709-737.0 337280 7.5 1800 1-1/8" 7-1/4" 215C 34.1-30.8 208-230
8.709-786.0 337384 7.5 3450 1-3/8" None 213T 30-33 208-230
8.709-793.0 337393 10.0 1725 1-3/8" None 215T 40 230
Three Phase Motors
8.751-796.0 337519 3.0 1760 1-1/8" 7-1/4" 182TC 9-8.4/4.2 208-230/460
8.751-319.0 337334 5.0 1750 1-1/8" None 184T 13.9-13.4/6.7 208-230/460
8.751-318.0 337333 5.0 1750 1-1/8" 7-1/4" 184TC 13.9-13.4/6.7 208-230/460
8.751-799.0 337537 7.5 1770 1-3/8" None 213T 18.8/9.4 230/460
8.751-793.0 337276 7.5 1770 1-3/8" 7-1/4" 213TC 21-18.8/9.4 208-230/460
8.751-794.0 337385 7.5 3450 1-1/8" None 184T 18.5-16.8/8.4 208-230/460
8.751-016.0 337544 10.0 1770 1-3/8" None 215T 25.4-24/12 208-230/460
8.751-795.0 377396 10.0 3490 1-3/8" None 215T 24.9-23.6/11.8 208-230/460
NOTE: Some of these motors will require two days from order to shipping

A.O. Smith - Pressure Washer Motors

Excellent power efficiency. “S” indicates Motor has On/Off switch.

Motor Shaft Bolt Frame/ Full Load

Part No. Orig. No. HP/S* RPM Dia Circle C-Face Amps Voltage

8.709-800.0 337413 2.0 3450 5/8" 5-7/8" 56C/56C 17.2/9.2/8.6 115/208/230

8.903-804.0 337414S 2.0 3450 5/8" 5 7/8" 56C/56C 17.2/9.2/8.6 115/208/230
8.903-805.0 337424S 3.0 3450 5/8" 5-7/8" 56C/56C 13.5 208/230
8.709-808.0 337438 6.0 3450 7/8" 5-7/8" 56C/56C 22.0 230

TEFC Motor
8.709-798.0 337407T 1.5 1750 5/8" 5-7/8" 56C/56C 15.0/7.5 115/230

94
 Your One Stop Shop for Parts BELTS & PULLEYS
Super “Gripnotch” V-Belts Pulleys
Part No. Original No. Size OD

8.715-517.0 5-40102158 AK21* 2.10"

Part No. Original No. Size • High quality 8.715-519.0 5-40102358 AK23* 2.30"
8.715-669.0 AX26 cast iron pulleys
9.802-368.0 AK25* 2.50"
8.710-727.0 369128A AX28 • Cast design
8.804-028.0 AK28* 2.80"
8.715-672.0 AX29 • All sizes available
8.715-524.0 AK30H 3.05"
8.715-673.0 369130A AX30 8.715-527.0 5-40103201 AK32H 3.25"
9.804-026.0 AX31 8.715-530.0 5-40103401 AK34H 3.45"
9.803-896.0 AX33 9.803-898.0 5-40103901 AK39H 3.75"
9.802-407.0 AX34 9.802-369.0 5-40107401 AK74H 7.25"
9.803-683.0 AX35 8.715-538.0 5-40108401 AK84H 8.25"
9.802-408.0 369136A AX36 8.715-539.0 5-40108901 AK89H 8.75"
• Full line of belts 9.802-409.0 AX37 AK pulley
• “V” notched for longer life 9.802-410.0 5-602038 AX38 9.803-298.0 5-40203001 2AK30H 3.05"
and better performance 8.715-682.0 5-602041 AX41 9.802-371.0 5-40203201 2AK32H 3.25"
9.802-411.0 5-602042 AX42 9.804-047.0 5-40203401 2AK34H 3.45"
8.715-546.0 5-40204401 2AK44H 4.75"
9.802-412.0 5-604022 BX22 8.715-548.0 5-40204901 2AK49H 4.25"
9.802-413.0 BX32 8.715-549.0 5-40205101 2AK51H 4.95"
9.802-414.0 369134B BX34 9.802-372.0 5-40205401 2AK54H 5.25"
9.802-415.0 369135B BX35 8.715-555.0 5-40206401 2AK64H 6.25"
9.802-416.0 369136B BX36 9.802-374.0 5-40207401 2AK74H 7.25"
2AK pulley
8.715-698.0 369137X BX37 9.802-375.0 5-40208401 2AK84H 8.25"
8.710-745.0 369138B BX38 9.803-548.0 5-40209401 2AK94H 9.25"
9.802-418.0 BX39
8.710-748.0 369140B BX40 8.715-560.0 BK30H 3.30"
9.802-419.0 369142B BX42 9.802-377.0 BK32H 3.35"
8.710-754.0 369143B BX43 9.802-379.0 BK36H 3.75"
9.802-421.0 369144B BX44 8.715-566.0 BK40H 3.95"
8.710-756.0 369145B BX45 8.710-819.0 372586 BK45H 4.25"
8.715.706.0 BX46 8.710-823.0 372596T BK47H 4.45"
8.715-708.0 BX48 BK pulley
8.710-831.0 372650T BK52H 4.95"
8.715-710.0 BX51 8.715-567.0 5-40405701 BK57H 5.45"
8.710-837.0 372695 BK60H 5.75"
8.710-841.0 372704T BK62H 5.95"
Pulley Bushings 8.715-568.0 5-40406501 BK65H 6.25"
8.715-570.0 BK70H 6.75"
Split Taper “H” 8.715-571.0 BK75H 7.25"
• For use with “H” sheaves, above. 9.802-380.0 BK80H 7.75"
8.715-573.0 BK85H 8.25"
Part No. Original No. Size 8.710-858.0 372799T BK100H 9.75"
Motor / Engine Bushings 2BK pulley
9.802-397.0 H x 5/8" 8.715-576.0 ­2BK32H 3.35"
9.803-897.0 H x 3/4" 8.710-811.0 372499T 2BK34H 3.55"
8.715-633.0 H x 7/8" 8.802-383.0 2BK36H 3.76"
• Split taper,
malleable iron 9.802-399.0 H x 1" 8.802-384.0 2BK40H 3.95"
• Keyed to both shaft 9.802-400.0 H x 1-1/8" 8.802-385.0 2BK45H 4.25"
and hub 9.802-401.0 H x 1-3/8" 8.715-582.0 2BK47H 4.45"
• Highest torque 8.715-638.0 5-511139 H x 1-3/8"-6B, 8.715-583.0 5-40505001 2BK50H 4.75"
carrying capacity Spline 9.802-386.0 2BK52H 4.95"
9.802-387.0 2BK60H 5.75"
Pump Bushings 8.715-588.0 2BK62H 5.95"
3TB pulley
8.711-118.0 376320 H x 20mm 9.804-060.0 5-40506501 2BK65H 6.25"
8.711-119.0 376322 H x 22mm 9.802-388.0 5-40506701 2BK67H 6.45"
8.711-121.0 376324 H x 24mm 9.715-591.0 2BK65H 6.75"
8.711-122.0 376325 H x 25mm 9.802-389.0 372774T 2BK80H 7.75"
8.711-123.0 376330 H x 30mm 8.715-593.0 372790T 2BK90H 8.75"
8.711-124.0 376332 H x 32mm 9.802-391.0 2BK100H 9.75"
8.711-125.0 376335 H x 35mm
8.715-598.0 5-406040 2TB40 4.35"

9.802-392.0 5-407034 3TB34 3.75"

9.802-394.0 5-407040 3TB40 4.35"
*x 5/8" Bore
95