Selection: Open Screw Compressors OS: Input Values
Selection: Open Screw Compressors OS: Input Values
Selection: Open Screw Compressors OS: Input Values
1/6
Overview
A
Evaporating SST -10.00 °C
Condensing SDT 35.0 °C
Qe Pe EER Ratio
kW kW W/W %
Total 312 94.7 3.29 --
OSKA7452-K 155.8 47.4 3.29 50.0
OSKA7452-K 155.8 47.4 3.29 50.0
BITZER Software v6.17.1 rev2582 29/04/2021 / All data subject to change. 2/6
Application Limits
OSKA7452
Standard OSKA7452
Legend
BITZER Software v6.17.1 rev2582 29/04/2021 / All data subject to change. 3/6
Result
A
Evaporating SST -10.00 °C
Condensing SDT 35.0 °C
Compressor Total OSKA7452-K OSKA7452-K
Cooling capacity 100% 100%
Cooling capacity 312 kW 155.8 kW 155.8 kW
Cooling capacity * -- 152.9 kW 152.9 kW
Evaporator capacity 312 kW 155.8 kW 155.8 kW
Shaft power 94.7 kW 47.4 kW 47.4 kW
Condenser capacity 358 kW 179.1 kW 179.1 kW
Ratio -- 50.0 % 50.0 %
COP/EER 3.29 3.29 3.29
COP/EER * -- 3.23 3.23
Mass flow LP 1022 kg/h 511 kg/h 511 kg/h
Mass flow HP 1022 kg/h 511 kg/h 511 kg/h
Operating mode Standard Standard Standard
Liquid temp. -- 33.0 °C 33.0 °C
Oil volume flow 4.30 m³/h 2.15 m³/h 2.15 m³/h
Cooling method External External External
Oil cooler outlet 57.0 °C 57.0 °C 57.0 °C
Oil cooler load 48.1 kW 24.0 kW 24.0 kW
Recommended driving motor -- 62.0 kW 62.0 kW
Discharge gas temp. w/o cooling 145.6 °C 145.6 °C 145.6 °C
Technical Data
Technical Data
Displacement (2900 RPM 50 Hz) 192 m³/h
Displacement (3500 RPM 60 Hz) 232 m³/h
Allowed speed range 1450 .. 4000 min-1
Sens of rotation (compressor) links / counter-clockwise
Weight 176 kg
Max. pressure (LP/HP) 19 / 28 bar
Connection suction line 76 mm - 3 1/8''
Connection suction line (NH3) DN 80
Connection discharge line 54 mm - 2 1/8''
Connection discharge line (NH3) DN 50
Adapter for ECO (NH3) DN 20 (Option)
Oil type NH3 Reniso KC68 , SHC 226E
Extent of delivery (Standard)
Suction shut-off valve Standard
Pressure relief valve Standard
Check valve Standard
Oil injection kit Standard
Built in oil filter Standard
discharge gas temperature monitoring SE-B2
Discharge gas temperature sensor Standard
Start unloading Standard
Capacity control 100-75-50% (Standard)
Protective charge Standard
Available Options
Oil flow control Option
Discharge shut-off valve Option
ECO connection with shut-off valve Option
Coupling housing Option
BITZER Software v6.17.1 rev2582 29/04/2021 / All data subject to change. 5/6
Open Screw Compressors OS
OS53..OS74
* Capacity control with ECO operation at the same time is limited to one single regulating step (CR 75 %). At CR 50 % the
ECO injection should be closed.
* Combined operation (ECO + CR 50 %) is possible under certain conditions, control and system design, however, require
individual consultation with Bitzer.
Motor Selection
The required driving motor is selected for starting conditions at direct start as well as at star-delta-start with start unloading
(50 % capcaity regulation). The starting conditions refer to the following defined operation points resp. to the maximum
application limit of the compressor. Should the evaporation- or the condensing temperature of the plant be higher at the start, an
individual motor selection is necessary.