Process Costing

Definition: Process Costing is defined as a branch of operation costing, that

determines the cost of a product at each stage, i.e. process of production. It is an
accounting method which is adopted by the factories or industries where the
standardized identical product is produced, as well as it passes through multiple
processes for being transformed into the final product.

In simple words, process costing is a cost accounting technique, in which the

costs incurred during production are charged to processes and averaged
over the total units manufactured. For this purpose, process accounts are
opened in the books of accounts, for each process and all the expenses relating
to the process for the period is charged to the respective process account.

Hence, it ascertains the total cost and unit cost of a process, for all the processes
carried out in industry. Further, the average cost represents the cost per unit,
wherein the total cost is divided by the total number of outputs produced during
the period to arrive at the cost per unit. The cost per unit can be calculated
using First in First Out Method (FIFO), Average Method and Weighted
average Method.

Features of Process Costing

 The plant has various divisions, and each division is a stage of production.
 The production is carried out continuously, by way of the simultaneous,
standardized and sequential process.
 The output of a process is the input of another.
 The production from the last process is transferred to finished stock.
 The final product is homogeneous.
 Both direct and indirect costs are charged to the processes.
 The production may result in joint and by-products.
 Losses like normal and abnormal loss occur at different stages of production
which are also taken into consideration while calculating the unit cost.
 The output of one process is transferred to another one at a price that includes
the profit of the previous process and not at the cost.
 At the end of the period, if there remains the stock of finished goods, then it
is also expressed in equivalent completed units. It can be calculated as:
Equivalent units of semi-finished goods or WIP = Actual number of units
in process n× Percentage of work completed
Process costing is employed by the industries whose production process is
continuous and repetitive, as well as the output of one process is the input of
another process. So, chemical industry, oil refineries, cement industries,
textile industries, soap manufacturing industries, paper manufacturing
industries use this method.

 Objects of Process Costing:

Following are the main objects of process costing:

(1) To Ascertain the Cost of Each Process:

It is necessary to know the cost at every stage of production and this is fulfilled
by process costing method. On this basis management is able to take decision in
respect of make or buy the required commodities. For example – in Process 1st
yarn is produced or manufactured at a cost of Rs. 125 per kg. whereas, it can be
obtained from the market at Rs. 115 per kg. In this case, it is profitable to buy
the yarn from the market at a saving of Rs. 10 per kg. This example shows the
importance of process costing.

(2) To Ascertain the Cost of Bye-Product:

Bye-product is that which is obtained with the main product in the course of
production. For example – while producing mustard oil, cake is also obtained
which is termed as bye-product and the cost of which is necessary to know the
actual cost of main product. Cost of bye-product is ascertained by preparing
bye-product Account, under process costing.

(3) To Know the Wastage in Each Process of Production:

During the courage of production, different wastages, such as, loss in weight,
normal wastage and abnormal wastage, etc. may arise. Management of any
concern may know about these wastages by Process Costing Account.

(4) To Ascertain the Profit or Loss of Each Process:

The output or the part of output at the stage of every process can be sold out
either at profit or loss. Thus the management can know about the profit or loss
at every process by preparing Processes Account.

(5) Base of the Valuation of Opening and Closing Stock of Each Next
Process:

If the total cost of production of any process is divided by the number of units,
we get cost of production per unit of that particular process and on this basis
opening and closing stock of next process is valued.

 Elements of Process Cost Accounting:

Under process costing, the cost of materials, labour, direct expenses and
overheads are collected as follows:

(1) Materials:

Raw materials and sundry supplies required for each process are obtained from
stores through stores requisitions. So, the costs of materials and sundry supplies
chargeable to any process can be ascertained from stores requisitions.

In case, the materials are issued in bulk to any process, the process concerned
intimates to the cost office the exact quantity of materials consumed in the
process during the particular period, and with the help of this data, the cost of
materials chargeable to the process is ascertained.

(2) Labour:

Wages paid to workers engaged in a particular process are ascertained through

the pay-rolls maintained for the concerned process, and are allocated directly to
the process concerned.
However, where workers are engaged in two or more processes, their wages,
ascertained through the relevant wage records, are apportioned among the
different processes on the basis of time spent.

(3) Direct Expenses:

All direct expenses incurred on a particular process are directly allocated to that
process.

(4) Overheads:

Overheads incurred on two or more processes are apportioned on the basis of

direct wages or on any other suitable basis. Sometimes overheads are recorded
at pre-determined rate based on direct wages, prime cost, etc.

Principles of Process Costing or Process Costing

Procedure:
The essential stages in process costing are:

(1) The factory is divided into a number of processes and an account is

maintained for each process.

(2) Each Process Account is debited with material cost, labour cost, direct
expenses and overheads allocated or apportioned to the process.

(3) The output of a process is transferred to the next process in the sequence. In
other words, finished output of one process becomes input (materials) of the
next process.

(4) The production records of each process are kept in such a way as to show
the quantity of production and the wastage and scrap and the cost of production
of each process for each period.

(5) In some cases the whole output of one process is not transferred to the next
process. A part of the output may be transferred to the next process, and a
certain portion of the output may be sold in semi-finished form or may be kept
in stock and transferred to Process Stock Account. If output of any process is
sold at a profit in semi-finished form, then profit on that particular sale will be
shown in the debit side of that concerned profit, as profit on goods sold or
transferred.

(6) In case there is loss or wastage of units in any process, the loss has to be
borne by the good units produced in that process, and as a result, the average
cost per unit increases to that extent.

It may be noted that, if there is loss or wastage in any process, the quantity of
loss or wastage should be entered on the credit side of the concerned Process
Account in the quantity column. In case the wastage has some scrap value, it
should appear in the credit side of the concerned Process Account in the value
column against the entry for wastage. But, if the scrap value of the wastage is
not specifically given in the problem, it should be taken as nil.

(7) The total cost of production of each process for a particular period is divided
by the number of units produced in that process during that period, and the
average cost per unit of production for a period is obtained.

(8) The finished output of the last process is transferred to the Finished Goods
Account.

Accumulation of Costs under Process Costing:

Under process costing, the costs of materials, labour direct expenses and
overheads are accumulated or collected as follows:

1. Materials:

Raw materials and sundry supplies required for each process are obtained from
stores though stores requisitions. So, the costs of materials and sundry supplies
chargeable to any process can be ascertained from stores requisitions.

In case the materials are issued in bulk to any process, the process concerned
intimates to the cost office the exact quantity of materials consumed in the
process during the particular period and with the help of this data, the cost of
materials chargeable to the process is ascertained.

2. Labour:
Wages paid to workers engaged in a particular process are ascertained through
the payrolls maintained for the concerned process, and are allocated directly to
the process concerned.

However, where workers are engaged in two or more processes, their wages,
ascertained through the relevant wage records, are apportioned among the
different processes on the basis of time spent.

3. Direct or Chargeable Expenses:

All direct or chargeable incurred in a particular process are directly allocated to

that process.

4. Indirect Expenses or Overheads:

Indirect expenses or overheads incurred on two or more processes are

apportioned on the basis of direct wages or on any other suitable basis.
Sometimes, overheads are recorded at predetermined rates based on direct
wages, prime cost, etc.

Advantages of Process Costing:

Process costing has the following advantages:

(1) Process costing helps in the computation of costs at shorter intervals, which
is usually a week, a fortnight or a month.

(2) It helps in the computation of costs of processes as well as the finished

product.

(3) The computation of costs under process costing involves less clerical work
and expenses.

(4) The computation of costs per unit at any one process is very easy, as the
units are homogeneous, and as such, the cost per unit can be found out easily by
averaging.

(5) It ensures a chooser control over production and costs.

(6) It is easy to quote tender price because of standardised process.

(7) Control can be exercised through standard costing technique and it is
possible to evaluate the performance of every process.

(8) Because cost of production is ascertained periodically, management is in a

position to receive various reports periodically and review the progress and
efficiency of the production process.

Disadvantages of Process Costing:

Following are the main disadvantages of process costing:

(1) When costs are recorded at the end of the period, it is not possible to
exercise control over costs.

(2) It is difficult to apportion total cost among joint products and bye-products.

(3) Under this method of costing, it is difficult to value work-in-progress.

(4) It is difficult to value losses, wastes and scraps, under this method of
costing.

(5) There is also the difficulty of ascertaining the value of closing stock where
output of one process is transferred to another process at market price.

(6) The costs available under process costing are historical costs. The historical
costs are not of much use for managerial control.

(7) This method provides the average cost per unit and the average cost per unit
is not always accurate. As such, the average cost is not of much use for the
purpose of detailed analysis and operating efficiency.
Difference between Job Costing and
Process Costing

There are various cost accounting techniques used to measure the cost of the
product. When the goods are produced only against special orders, job
costing is used by firms. On the other hand, when a product passes through
several processes or stages, the output of one process becomes the input of next
process, and to determine the cost of each process, process costing method is
applied. It is generally used when like units are to be manufactured, that too in a
continuous flow.

In other words, the former is used to calculate the cost of jobs or contracts
which are distinct in nature, while the latter used to compute the cost charged to
each process. So, here in this article excerpt, we present all the differences
between Job Costing and Process Costing, in a tabular form.

Difference between Job Costing & Process Costing

BASIS FOR
JOB COSTING PROCESS COSTING
COMPARISON

Meaning Job costing refers to calculating the A costing method, in which the costs
cost of a special contract, work order which are charged to various
where work is performed as per client's processes and operations is
or customer's instructions. ascertained, is known as Process
Costing.
 BASIS FOR
JOB COSTING PROCESS COSTING
COMPARISON

Nature Customized production Standardized production

Assignment of Calculating cost of each job. First of all, cost is determined

cost for the process, thereafter
spread over the produced
units.

Cost Centre Job Process

Scope of cost Less High

reduction

Transfer of Cost No transfer Cost is transferred from one

process to another

Identity Each job is different from Products are manufactured

another. consecutively and so they lose
their identity.

Cost Completion of the job. End of the cost period.

Ascertainment

Industry type Job costing is suitable for the Process costing is perfect for
industries which manufactures the industry where mass
products as per customer's production is done.
order

Losses Losses are usually not Normal losses are carefully

segregated. ascertained and abnormal
losses are bifurcated.
 BASIS FOR
JOB COSTING PROCESS COSTING
COMPARISON

Work-in- WIP may or may not exist at WIP will always be present in
progress (WIP) the beginning or at the end of the beginning or at the end of
the financial year. the accounting period.