Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 60 views

    2K NTNK 101 Matt Coat Til

    Uploaded by

    passqwerty
    This document provides technical information about a 2K NTNK 101 MATT COAT ink for flexible packaging. It has been formulated for gravure printing and provides high mattness, good scratch resistance, and high heat resistance on substrates like PET and BOPP. The ink has a pot life of about 24 hours and requires optimal drying to avoid blocking. It achieves full curing and crosslinking within 24 hours, resulting in very good heat resistance, scratch resistance, adhesion and properties suitable for retort applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    2K NTNK 101 Matt Coat Til

    Uploaded by

    passqwerty
    60 views3 pages
    This document provides technical information about a 2K NTNK 101 MATT COAT ink for flexible packaging. It has been formulated for gravure printing and provides high mattness, good scratch resistance, and high heat resistance on substrates like PET and BOPP. The ink has a pot life of about 24 hours and requires optimal drying to avoid blocking. It achieves full curing and crosslinking within 24 hours, resulting in very good heat resistance, scratch resistance, adhesion and properties suitable for retort applications.

    Original Title

    2K NTNK 101 MATT COAT TIL

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides technical information about a 2K NTNK 101 MATT COAT ink for flexible packaging. It has been formulated for gravure printing and provides high mattness, good scratch resistance, and high heat resistance on substrates like PET and BOPP. The ink has a pot life of about 24 hours and requires optimal drying to avoid blocking. It achieves full curing and crosslinking within 24 hours, resulting in very good heat resistance, scratch resistance, adhesion and properties suitable for retort applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    60 views3 pages

    2K NTNK 101 Matt Coat Til

    Uploaded by

    passqwerty
    This document provides technical information about a 2K NTNK 101 MATT COAT ink for flexible packaging. It has been formulated for gravure printing and provides high mattness, good scratch resistance, and high heat resistance on substrates like PET and BOPP. The ink has a pot life of about 24 hours and requires optimal drying to avoid blocking. It achieves full curing and crosslinking within 24 hours, resulting in very good heat resistance, scratch resistance, adhesion and properties suitable for retort applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Technical Information Literature

    2K NTNK 101 MATT COAT


    (Surface Printing Ink for flexible packaging)

    2K NTNK 101 MATT COAT has been carefully formulated for gravure printing, satisfying the demand of
    high mattness,good scratch resistance and high heat resistance on a wide range of substrates.

    TECHNICAL DATA
    AND WORKING ADVICE

    SUBSTRATE

    2K NTNK 101 MATT COAT is suitable for printing in PET and both side treated BOPP. This ink has
    excellent adhesion to PET and treated side BOPP.

    MAIN CHARACTERISTICS
    Good drying speed, no blocking.
    Excellent mattness.
    High Heat resistance for the fully cured system.
    Suitable for retort system.
    Good scratch resistance.

    HOW TO USE IT

    The mixture prepared and diluted at printing viscosity has a pot life of about 24 hours. If the room is at high
    temperature and high relative humidity (summer condition) the pot life is reduced.
    Because the product is extremely moisture sensitive, we suggest the product should be opened just before
    using it and the printing mixture prepared frequently.
    Tightly close this mixture in the cans.
    Components: A : EL 11965 (dry content 21.5%)
    B (Hardener): HSM 930 (dry content 37%)

    Mixing Ratio: 1. For general Application


    EL 11965 100 parts
    HSM 930 10 parts

    2. For retort Application


    EL 11965 100 parts
    HSM 930 15 parts

    Reducer: (EAc: NPAc) (70:30)

    PRINTING AND DRYING


    Optimal drying is necessary to avoid high solvent retention and subsequent poor crosslinking with blocking
    problems.
    Printing at constant speed enables constant control of drying and mixture viscosity.
    Frequent viscosity and retained solvent controls are recommended to find the most suitable working
    conditions.

    CURING
    The drying of the press starts the crosslinking of the product, avoiding any blocking in the reel, but the
    complete crosslinking finishes on the reel, without the formation of secondary products.
    The complete crosslinking takes about 24 hours at room conditions. At this point the varnish shows very
    good heat resistance, scratch resistance, adhesion and retort properties.

    CLEANING
    The cured varnish is insoluble.
    For long steps it is necessary to let the varnishing unit spin slowly avoiding the contact with the doctor blade.
    When the job is completed, the whole varnishing unit must be immediately and deeply washed, using the
    indicated solvents.

    STORAGE

    Moisture-sensitive products.
    The product must be kept in their own sealed packages, in a cool and dry room.
    They must be used within 6 months after purchase.

    SAFETY REGULATIONS
    Material safety data sheet is separately available.

    NOVEMBER 2018This information has been carefully compiled from experience gained in the laboratory and under
    commercial conditions. However, the product’s performance and its suitability for the customer’s purpose depend on the
    particular conditions of use and the material being printed. We recommend that customers satisfy themselves that each
    product meets their requirements in all respects before commencing a print run. Since we cannot anticipate or control the
    conditions under which our products are used, it is not possible to guarantee their performance. All sales are subject to
    our standard terms and conditions of sale.
    We would point out that the information contained in this leaflet is only a recommendation and may need to be altered to
    suit the conditions and efficiency of the equipment employed. DIC products are not designed for use in conjunction with
    those of any other ink maker or similar supplier unless agreed to in writing.

    For further information please contact Marketing Department

    DIC INDIA LIMITED


    Transport Depot Road, Calcutta 700 088, INDIA
    Telephone : (033) 2449-6591-6, 2449-3984/5, 2449-2345/6
    Fax : (033) 449-2311 / 5267 / 0433

    Calcutta (ISO 14001, 9001), Mumbai (ISO 9002), Noida (ISO 9002), Ahmedabad (ISO 9002), Chennai

    You might also like