Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 63 views

    Design Change of Cooling Water Pump Impeller

    Uploaded by

    Esteban Giurovich
    The document summarizes design changes made to the cooling water pump impeller for Yanmar 6EY18 engines. The original impeller was made of bronze and used a collar and locking nut. Improvement 1 changed to a cast iron impeller with increased tightening torque but kept the collar and locking nut. Improvement 2 further increased the tightening torque, changed to a larger screw size, and abolished the collar and locking nut in favor of a 4-prong tightening tool. Engine numbers are provided for each improvement level.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Design Change of Cooling Water Pump Impeller

    Uploaded by

    Esteban Giurovich
    63 views2 pages
    The document summarizes design changes made to the cooling water pump impeller for Yanmar 6EY18 engines. The original impeller was made of bronze and used a collar and locking nut. Improvement 1 changed to a cast iron impeller with increased tightening torque but kept the collar and locking nut. Improvement 2 further increased the tightening torque, changed to a larger screw size, and abolished the collar and locking nut in favor of a 4-prong tightening tool. Engine numbers are provided for each improvement level.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes design changes made to the cooling water pump impeller for Yanmar 6EY18 engines. The original impeller was made of bronze and used a collar and locking nut. Improvement 1 changed to a cast iron impeller with increased tightening torque but kept the collar and locking nut. Improvement 2 further increased the tightening torque, changed to a larger screw size, and abolished the collar and locking nut in favor of a 4-prong tightening tool. Engine numbers are provided for each improvement level.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    63 views2 pages

    Design Change of Cooling Water Pump Impeller

    Uploaded by

    Esteban Giurovich
    The document summarizes design changes made to the cooling water pump impeller for Yanmar 6EY18 engines. The original impeller was made of bronze and used a collar and locking nut. Improvement 1 changed to a cast iron impeller with increased tightening torque but kept the collar and locking nut. Improvement 2 further increased the tightening torque, changed to a larger screw size, and abolished the collar and locking nut in favor of a 4-prong tightening tool. Engine numbers are provided for each improvement level.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    +6EY18,+Service,+Malfunction,

    +Caution,+Service news 1/2

    YANMAR SERVICE NEWS


    No.: 13-2-G-10-013-０
    Subject Design Change of Cooling Water Pump Impeller Oct., 2013

    Engine Use Marine Aux.


    Model 6EY18(A)L
    Engine Nos.

    Concerning the engine-mount cooling water pump of 6EY18 engine, as has been informed to you previously by our
    Service News, (No.08-2-G-12-017-O-Rev. 1), in order to prevent the impeller collar from wear, we changed the
    material of impeller, (bronze  cast iron), abolished the use of collar, and increased the tightening torque. In
    addition to this, we changed the screw size and abolished the use of the locking nut presently for increasing
    tightening torque. In this relation, we would like to advise you of the details of improvements as follows. Please
    note that it is possible to change the status to Improvement ② below by changing a set of impeller and shaft, (with
    the use of the 4-prong type tightening tool). Refer to the table below upon your periodic servicing opportunities.

    Approved Checked Prepared

    LARGE POWER PRODUCTS OPERATIONS DIV.


    QUALITY ASSURANCE DEPT.
    2/2

    Table: Details of improvements for Cooling Water Pump


    Original Improvement ① Improvement ②
    Imp ller Material Bronze Cast Iron Cast Iron
    Screw Size M22×P2.5 M22×P2.5 M24×P1.5
    Tightening Torque 206～220Nm 290～310Nm 320～340Nm
    Collar Yes No No
    Locking Nut Yes Yes No
    0104～0473 0474～0476
    Engine Nos. 0477～0479 0480～0503 1676～
    0504～0509 0510～1675
    H.T.side 746623-42030 746623-42031 746623-42251
    Assy.

    L.T.side 746623-42040 746623-42041 746623-42261


    Part No.

    Impeller 146673-42221 146674-42220 146623-42260


    Shaft 146673-42210 146673-42210 146623-42250
    Tightening 146673-92750 146673-92751 146673-92751
    Tool (2-prong type) (4-prong type) (4-prong type)

    Structure

    Collar Nut

    You might also like