Are you ready to make the leap?

2|3

Rhythms of playful patterns and subtle textures along a seamless continuum of luminance.

4|5

Luminous flowing form merged with function and flexibility.

6|7

Innovative optics at the forefront of the technology transformation.

Punctuate with pixels.

8|9

Make a splash, or keep it clean.

OFFICE

Applications

EDUCATION LIBRARY HEALTH RETAIL

Jump delivers an unparalleled array of performance and aesthetic options to meet the sustainability challenges of any architectural environment.
TM

OFFICE

12 | 13

Works for workstations. Visual comfort, refined design and maximum energy savings.

Light Source Room Size Row Spacing Mounting Height

1 x 28 W T5 50' x 40' x 12'H 8 ft o.c. 8 ft AFF

Light Level Energy Density Fixture Efficiency System Efficacy

47 fc 0.61 W/ft2 85% 72.8 lm/W Suspended | White Finish PixelPerf | Flat Endcap Symmetric Distribution

To see results for this application using the most current LED performance data, visit ledalite.com/jump.

OFFICE

Asymmetric meets aesthetic. Reduced consumption, luminous continuity and consistent color.

Light Source Room Size Row Spacing Mounting Height

1 x 28 W T5 40' x 8' x 9.5'H N/A 8 ft AFF

Light Level Energy Density Fixture Efficiency System Efficacy

24 fc 0.57 W/ft2 84% 71.7 lm/W Wall Mount | White Finish PixelPerf | Flat Endcap Asymmetric Distribution Room Side (R/S)

To see results for this application using the most current LED performance data, visit ledalite.com/jump.

14 | 15

EDUCATION

Efficacy and efficiency in educational environments. Energy performance and flexibility for learning.

16 | 17

Light Source Room Size Row Spacing Mounting Height

1 x 32 W T8 36' x 42' x 11.5'H 12 ft o.c. 10 ft AFF

Light Level Energy Density Fixture Efficiency System Efficacy

35 fc 0.53 W/ft2 77% 72.9 lm/W Suspended | White Finish PixelPerf | Flat Endcap Symmetric Distribution Cantilever | White Finish PixelPerf | Flat Endcap Asymmetric Distribution Wall Side (W/S)

To see results for this application using the most current LED performance data, visit ledalite.com/jump.

EDUCATION

Welcome to the new way of working together. Ideal for places of concentration and conversation.

Light Source Room Size Row Spacing Mounting Height

1 x 32 W T8 25' x 40' x 9.5'H 10 ft o.c. 8 ft AFF

Light Level Energy Density Fixture Efficiency System Efficacy

43 fc 0.44 W/ft2 77% 72.9 lm/W Suspended | Titanium Finish SplashPerf | Luminous Endcap Symmetric Distribution

To see results for this application using the most current LED performance data, visit ledalite.com/jump.

18 | 19

LIBRARY

*Application

results include PureFX 1x1 (26W) luminaires.

20 | 21

A novel approach to library lighting. Luminous spaces for study and uniform ver tical illumination for stacks.

Light Source Room Size Row Spacing Mounting Height

1 x 28 W T5 100' x 33' x11.5'H 10 ft o.c. 8.5 ft AFF

Light Level* Energy Density* Fixture Efficiency System Efficacy

46 fc 0.78 W/ft2 85% 72.8 lm/W Suspended | White Finish SolidSide | Flat Endcap Symmetric Distribution

To see results for this application using the most current LED performance data, visit ledalite.com/jump.

HEALTH

Healthy spaces for healthy living. Enhancing the well-being of people and the environment.

Light Source Room Size Row Spacing Mounting Height

2 x 28 W T5 70' x 30' x14'H 10 ft o.c. 10 ft AFF

Light Level Energy Density Fixture Efficiency System Efficacy

80 fc 1.02 W/ft2 74% 62.8 lm/W Suspended | Black Finish SplashPerf | Luminous Endcap Symmetric Distribution

To see results for this application using the most current LED performance data, visit ledalite.com/jump.

22 | 23

RETAIL

Go with the flow. Detailed design elements and multiple distributions create dynamic retail spaces.

24 | 25

Light Source Room Size Row Spacing Mounting Height

1 x 54 W T5HO 25' x 26' x12'H 10 ft o.c. 9 ft AFF

Light Level Energy Density Fixture Efficiency System Efficacy

60 fc 1.34 W/ft2 80% 58.1 lm/W Suspended | Black Finish SplashPerf | Luminous Endcap Symmetric Distribution Suspended | Black Finish Asymmetric Distribution SplashPerf | Luminous Endcap Wall Side (W/S)

To see results for this application using the most current LED performance data, visit ledalite.com/jump.

Technology

MESOOPTICS LEDLOGIQ AIRWAVE

TM TM

RESPONSE

Jump is fully integrated with innovative Philips Ledalite technology for maximum control, performance and energy savings.

OPTICS
Exceptional Control & Efficiency
MesoOptics technology provides the best possible combination of control and luminance. Higher transmission efficiencies than traditional optical and control methods means lower energy consumption. Small amounts of controlled brightness are introduced to the vertical surfaces creating a brighter and more visually comfortable environment without unwanted glare.

ledalite.com/mesooptics

45 0

45

Optimal Batwing Distribution

28 | 29

How it Works
Philips Ledalites revolutionary MesoOptics is produced in a manner similar to the holographic microstructures that appear on most credit cards. Using patented processes, lighting distributions less than 5 microns in size are applied to a recyclable substrate, creating a highly efficient and unique lighting control approach.

100%

100%

60%
Optical Nanotechnology Homogenous Distribution Dispersed Elliptical Constrained Linear Redirected Circular Traditional Diffuser MesoOptics

95%

Purify
MesoOptics homogenizes color, and removes striations and hot spots from lighting sources, creating smooth gradients of pure, white light free from color shifts.

Control
MesoOptics disperses light uniformly and creates precisely controlled beam patterns to redirect light into optimum angles.

Sustain
MesoOptics highly efficient material allows up to 95% of the light to pass through, creating highly energy efficient lighting products.

LED OPTICS
Design Intelligence
LEDLOGIQ is a comprehensive design approach that integrates emerging LED platforms with advanced optical, mechanical, electronic, industrial, and thermal engineering to deliver optimal lighting distribution, consistent color and exceptional system performance.
TM

L O G I Q

Longevity Optics

60,000 hours to L80 | Futureproof Upgradable Platform | Thermal Management Optimized for LED | High Efficacy | Performance Distributions

Guarantee

5 Year Total System Warranty | Philips Ledalite Support | Easy Maintenance

0-10V Dimming | Response Daylight Harvesting | Airwave Wireless Controls

Integration Quality

U.S. DOE Lighting Facts Partner | UL and CSA | IES LM-79 & LM-80 Tested

30 | 31

How it Works
The LEDLOGIQ integrated design approach delivers a highly efficacious luminaire with consistent color along a textured continuum of luminance with no direct view of the light source. 1. A highly efficient 0-10V dimmable driver delivers constant current to thermally managed high-power LEDs. 2. White light emitted from the linear LED array passes through a biconvex lens where it is internally reflected and laterally refocused. 3. Light is redirected by 98% efficient Miro Silver reflectors and then mixes inside the optical cavity. 4. Light passes through MesoOptics holographic film and emerges from the translucent ribbed lens in a precisely controlled batwing distribution.

LED
A Partner You Can Trust...
Todays rapid state of technology transformation demands an innovation partner you can trust. Philips Ledalite is a partner of the U.S. Department of Energys Lighting Facts Program. As a part of this program, all Jump LED configurations are independently tested to IES LM-79 and LM-80 industry standards to validate their performance. The Lighting Facts label provides key product performance data to ensure LED products perform as expected.
Philips Ledalite

A Program of the U.S. DOE

All results are according to IESNA LM-79-2008: Approved Method for the Electrical and Photometric Testing of Solid-State Lighting. The U.S. Department of Energy (DOE) verifies product test data and results.

Example label. For current U.S. DOE Lighting Facts verified data, please visit ledalite.com/jump

Visit www.lightingfacts.com for the Label Reference Guide.

Registration Number: F46Z-F3G1PQ Model Number: 12 1LAAQS Type: Other

32 | 33

Futureproof. Period.
LEDLOGIQ solutions are field upgradable to stay current with the latest advancements in solid state lighting technology. Jump LED is designed with a simple plug and play platform so that field replacement and maintenance are quick and hassle-free. As a partner with the worlds leading LED component suppliers, Philips Ledalite provides high quality, top performing products, and a commitment to ongoing research and development.

Maintenance Made Easy

1. Lift and shift or remove the lens.

2. Unscrew the entire LED assembly from the housing.

5 Year Total System Warranty

Jump LED comes with a 5 year total system warranty, that covers the entire luminaireincluding the LED board, driver and all fixture componentswith world class support backed by Philips Ledalite.
3. Remove the LED assembly. 4. Disconnect the LED quick-wire plugs.

5. If required, unscrew the LED driver.

6. Remove the LED driver and replace.

WIRELESS CONTROLS
Imagine a World Without Wires...
Sensors energized by the light they collect. Switches powered by the motion used to operate them. Airwave wireless controls represent a quantum leap forward in flexibility and sustainability. Using organic sources of renewable kinetic and solar energy, Airwave delivers wireless individual personal control, daylight harvesting, occupancy sensing, and full range dimming for spaces where the ability to control energy and lighting are essential. The simple flick of a batteryless, wireless switch creates enough kinetic energy for simple ON/OFF control or dimming. Solar powered Airwave sensors monitor ambient daylight levels or occupancy and wirelessly signal luminaires to adjust output and save energy.
TM

Airwave Wireless. Batteryless. Limitless. ledalite.com/airwave

34 | 35

NEW Solar powered occupancy sensor

How it Works

The solar powered occupancy sensor significantly enhances energy savings by automatically dimming down and then turning lights off when the space is vacant.

Intelligent transceiver
As the hub of system intelligence, the Airwave transceiver receives wireless signals from each device and commands the associated light fixtures to turn on, turn off or dim.

Solar powered photosensor

The solar powered photosensor harnesses energy from natural light via integrated miniature photovoltaic cells and constantly monitors illumination levels.

Kinetic energy switch Kinetic handheld remote

The wireless and battery-free Airwave wall switch and remote handheld control are powered by the simple motion of pushing the switch; creating just enough kinetic energy to send a wireless signal to the transceiver.

DAYLIGHT HARVESTING
Daylight is free. So are the sensors.
No wiring. No commissioning. 35% energy savings. Jump is available with Philips Ledalites Response Daylight sensors. These fixture integrated sensors can provide 30-35% energy savings in window adjacent locations helping to reduce operating expenses and comply with new energy codes. Response Daylight sensors are factory pre-calibrated and ready to use right out of the box. Just plug in the fixtureno power packs, standalone sensors or low-voltage wiring schemes required. The sensors adjust light output gradually with minimal distraction for occupants. A built-in delay prevents disruptions from passing clouds and occasional shadows.

36 | 37

How it Works
In this example, two control zones have been created where there is ample daylight contribution, and one uncontrolled zone where daylight is minimal. As daylight contribution increases, sensors automatically and gradually reduce electric light output to save energy. ledalite.com/response

Daylight Zones

Electric Lighting Zone

primary daylight zone

10

secondary daylight zone

20

electric lighting zone

30

AESTHETICS

Details

FINISHES ENDCAPS MOUNTING DISTRIBUTIONS

Aesthetic design elements, multiple distributions and variable mounting options make Jump a highly flexible choice for functional environments.

DESIGN DETAILS
Aesthetics and Finishes
Jumps soft sophisticated form is available in three aesthetics. Mix and match styles, colors, and endcaps to create any combination. All factory paint finishes are thermally cured textured polyester powder coat. Custom color matching also available.
Black | SplashPerf A bold and contemporary pattern with uninterrupted frequency along the entire length.

Titanium Silver | PixelPerf Rhythms of subtle visual interest repeated in 4' increments.

White | SolidSide Minimalist simplicity that emphasizes the elegance of form.

40 | 41

Endcaps
3.72" 94.49 mm

Dimensions
2.42" 61.47 mm

Luminous Endcap
0.56" 14.22 mm

4.50" 114.30 mm

Flat Endcap
4.45" 113.03 mm

INFINITE MOUNTING
Variable Positioning
Jumps inherently flexible design allows aircraft cables to glide along the length of the luminaire for optimal positioning of suspended configurations. Wall mount and cantilever options are also equipped with a variable position mounting for maximum flexibility and ease of integration with all types of new and existing construction conditions.

Options

Suspended Mount

Surface Mount

5.40" 137.16 mm 17.85" 453.39 mm

Wall Mount

Cantilever Mount

42 | 43

Non-accessible Ceilings
A1 A3

Design Details
Suspended versions of Jump come with discreet stainless steel aircraft cables and a reflective silver power cord that virtually disappears from view in any architectural condition.

T-bar Ceilings
A2

A5

A6

DISTRIBUTIONS
Symmetric
Suspended | Surface | Cantilever

Asymmetric W/S
Suspended | Surface | Cantilever

Asymmetric R/S
Wall Mount

45 0

45

45 0

45

45 0

45

LED

LED

LED Symmetric

S LED/W DEL

LED_ Asymmetric (wall-side)

S LED/R DEL

LED_ Asymmetric (room-side)

45 0

45

45 0

45

45 0

45

1 T5/T5HO 11 Lamp T5/T5HO T8

x049 T8 | 1 LampSymmetric

1 Lamp S/W 8T 1 | 1 Lamp T8 T5/T5HO

S/W OH5T/5T 1

Curve_Fluorescent_ Asymmetric (wall-side)

1 Lamp T5/T5HO | 1 Lamp T8 S/R 8T 1

S/R OH5T/5T 1

Curve_Fluorescent_ Asymmetric (room-side)

45 0

45

2 T5/T5HO Lamp T5/T5HO 2 T8

x049 T8 | 2 LampSymmetric

For superior uniformity of vertical illuminance, all versions of asymmetric W/S luminaires are designed with a slotted optic/housing facing the wall.

For controlled luminance on the wall and primary forward throw into the space, asymmetric R/S luminaires are designed with a solid optic/housing facing the wall.

44 | 45

Specification Guide
Jump Series
1201 Suspended Symmetric 1208 Suspended Asymmetric (W/S) 1211 Surface Mount Symmetric 1218 Surface Mount Asymmetric (W/S) 1228 Wall Mount (R/S) 1231 Cantilever Symmetric 1238 Cantilever Asymmetric (W/S)
W/S = Wall Side distribution R/S = Room Side distribution

Light Source
LAA* LED 4000K LAB* LED 3500K F10 1xT5 F20 2xT5 H10 1xT5HO H20 2xT5HO T10 1xT8 T20 2xT8
* Consult website for most current LED performance specifications.

Lower Optics
Q MesoOptics Ribbed Lens

Housing Style
E SolidSide P PixelPerf S SplashPerf

Run Length
Enter total run length in feet (4ft increments)
Available in 4ft and 8ft modules.

Wiring Type
1 1cct 2 2cct 3 1cct w/emergency 5 1cct w/battery pack 7 1cct dimming
Consult the website for a full list of available options.

Ballast / Driver
E Standard
Consult the website for a full list of supported ballasts and drivers.

Finish
T B Titanium Silver Black

Integrated Controls
DS Daylight Response Sensor

Endcaps
Specify: Luminous Endcap Flat Endcap

W White X Custom Color

Some options may not be available for each configuration. Consult factory for details.

All application performance results have been calculated using real luminaire photometric test data and OEM published lamp-ballast system specifications for Ledalite factory standard components at the time of publication. Illuminance information as published are average maintained footcandle values based on predictive analyses with calculation grids centered in the respective rooms. Changes to luminaire mounting and/or workplane heights affect uniformity but have no significant impact on energy performance or light levels. Modifications to architectural conditions, luminaire components, and calculation parameters will yield different results. For further information or custom analysis for your project, please contact the Ledalite Applications Engineering Department. EnOcean, alliance logo, alliance member logo and ingredient logo are registered trademarks of EnOcean GmbH and EnOcean Alliance Inc. EnOcean Alliance Inc., 2011.

Philips Ledalite
1975092A Avenue Langley, BC, Canada V1M 3B2 Tel: 604.888.6811

LEED and related logo is a trademark owned by the U.S. Green Building Council and is used by permission.The LEED Certification Mark is a registered trademark owned by the U.S. Green Building Council and is used by permission. All rights reserved. All other product or service names are the property of their respective owners. Due to continuing product improvements, Philips Ledalite reserves the right to change specifications without notice. 2011 Philips Group. L0343 01.11 Luminaires use fluorescent lamps that contain small amounts of mercury. Such lamps are labeled Contains Mercury and/or with the symbol Hg. Lamps that contain mercury must be disposed of in accordance with local requirements. Information regarding lamp recycling and disposal can be found at www.lamprecycle.org.

ledalite.com