TRS2251 Routing and Switching: Name: ID No: Date: Lab 3: Basic VLSM Calculation and Addressing Design (3 %)
TRS2251 Routing and Switching: Name: ID No: Date: Lab 3: Basic VLSM Calculation and Addressing Design (3 %)
TRS2251 Routing and Switching: Name: ID No: Date: Lab 3: Basic VLSM Calculation and Addressing Design (3 %)
192.168.1.0/26 192.168.1.64/26
192.168.1.160/27 192.168.1.208/28
192.168.1.224/30 192.168.1.228/30
192.168.1.128/27 192.168.1.192/28
192.168.1.232/30
Topology Diagram
Addressing Table
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 5
Lab 3: Basic VLSM Calculation and Addressing Design
Learning Objectives:
Upon completion of this activity, you will be able to:
• Determine the number of subnets needed.
• Determine the number of hosts needed. for each subnet
• Design an appropriate addressing scheme using VLSM.
• Assign addresses and subnet mask pairs to device interfaces.
• Examine the use of the available network address space.
Scenario
In this activity, you have been given the network address 192.168.1.0/24 to subnet and provide the IP
addressing for the network shown in the Topology Diagram. VLSM will be used so that the addressing
requirements can be met using the 192.168.1.0/24 network. The network has the following addressing
requirements:
• The HQ LAN1 will require 50 host IP addresses.
• The HQ LAN2 will require 50 host IP addresses.
• The Branch1 LAN1 will require 20 host IP addresses.
• The Branch1 LAN2 will require 20 host IP addresses
• The Branch2 LAN1 will require 12 host IP addresses.
• The Branch2 LAN2 will require 12 host IP addresses.
• The link from HQ to Branch1 will require an IP address for each end of the link.
• The link from HQ to Branch2 will require an IP address for each end of the link.
• The link Branch1 to Branch2 will require an IP address for each end of the link.
(Note: Remember that the interfaces of network devices are also host IP addresses and are included
in the above addressing requirements.)
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 5
Lab 3: Basic VLSM Calculation and Addressing Design
Step 1: Determine the subnet information for the largest network segment or segments.
In this case, the two HQ LANs are the largest subnets.
1. How many IP addresses are needed for each LAN? ___50____
2. What is the smallest size subnet that can be used to meet this requirement? ___/26____
3. What is the maximum number of IP addresses that can be assigned in this size subnet?
___62____
HQ LAN1 Subnet
Network Decimal Subnet CIDR Subnet First Usable IP Last Usable IP Broadcast
Address Mask Mask Address Address Address
192.168.1.0 255.255.255.192 /26 192.168.1.1 192.168.1.62 192.168.1.63
HQ LAN2 Subnet
Network Decimal Subnet CIDR Subnet First Usable IP Last Usable IP Broadcast
Address Mask Mask Address Address Address
192.168.1.64 255.255.255.192 /26 192.168.1.65 192.168.1.126 192.168.1.127
Step 3: Determine the subnet information for the next largest network segment or segments.
In this case, the two Branch1 LANs are the next largest subnets.
1. How many IP addresses are needed for each LAN? ___20____
2. What is the smallest size subnet that can be used to meet this requirement? ___/27____
3. What is the maximum number of IP addresses that can be assigned in this size subnet? __30___
Step 5: Determine the subnet information for the next largest network segment or segments.
In this case, the two Branch2 LANs are the next largest subnets.
1. How many IP addresses are needed for each LAN? ___12____
2. What is the smallest size subnet that can be used to meet this requirement? ___/28____
3. What is the maximum number of IP addresses that can be assigned in this size subnet? ___14__
Step 7: Determine the subnet information for the links between the routers.
1. How many IP addresses are needed for each link? __2_____
2. What is the smallest size subnet that can be used to meet this requirement? ___/30____
3. What is the maximum number of IP addresses that can be assigned in this size subnet? __2____
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 4 of 5
Lab 3: Basic VLSM Calculation and Addressing Design
3. Assign the next available subnet to the link between the HQ and Branch2 routers.
4. Fill in the chart below with the appropriate information.
5. Assign the next available subnet to the link between the Branch1 and Branch2 routers.
6. Fill in the chart below with the appropriate information.
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 5 of 5