Product Datasheet
Product Datasheet
Product Datasheet
Aquaforce Pro
An IP66, dust and moisture resistant LED luminaire.
Electronic, fixed output control gear. With medium beam
distribution. Class I electrical. Canopy: light grey
polycarbonate. Diffuser: high transmission opal
polycarbonate with refraction prisms. Patented snap-on
mechanism EasyClick for clipless mounting of diffuser. For
surface or suspended mounting. Quick-fix brackets
supplied for surface mounting. Suitable for ceiling or wall
(both vertically and horizontally). Approved for indoor use
or in canopied outdoor areas (see installation instructions).
Mounting kits for conduit, chain suspension and catenary
suspension are available as accessories. Suitable for
through wiring with H05VV or NYM cable (rated 10A).
ambient temperature: -20°C to +35°C. Complete with
4000K LED..
Dimensions: 1100 x 92 x 90 mm
Luminaire input power: 35.2 W
Luminaire luminous flux: 4530 lm
Luminaire efficacy: 129 lm/W
Weight: 1.7 kg
180°
150° 150°
120° 120°
60° 60°
30° 30°
0°
cd/klm
TLG_AQUP_M_LD1.wmf D42271AA_AQFPRO_S_LED4300-840_PC_MB_HF.ldt
All values marked with an * are rated values. Thorn uses tried and tested components from leading suppliers, however there may be isolated instances of
technology-related failures of individual LEDs during the rated product lifetime. International standards set the tolerance in initial flux and connected load at ±10%.
Unless stated otherwise, the values apply to an ambient temperature of 25°C.
In most products the failure of one LED point causes no functional impairment to the lighting performance of the luminaire and is therefore no reason for complaint.
Unless otherwise stated all Thorn LED products are suitable for unrestricted use (rated RG1) with regard photobiological blue light safety (IEC/EN60598-1).
Thorn Lighting is constantly developing and improving its products. The right is reserved to change specifications without prior notification or public announcement.
© Thorn Lighting