ＨＣＲ Ｓｅｒｉｅｓ

FRD Furukawa reserves right to change specifications without prior notice.

ISO9001 ISO14001
Takasaki, Yoshii Works
Certified Management System

5-3, 1-chome, Nihonbashi, Chuo-ku, Tokyo 103-0027, Japan

Phone +81-3-3231-6982 Fax +81-3-3231-6994

HCR1200-EDⅡ-E1305-F4
Printed in Japan
 The ultimate combination or
performance and economy
With the field proven HD700 series drifter and IDS,
it’s easier than ever before to drill FAST & STRAIGHT.

★ The key for market leading drilling performance

I D S : Integrated Drilling System
D D S : Dual Damper System
★ Newly designed economy mode
★ Eco friendly engine

1 2
 Drilling performer, HCR1200-EDⅡ
High-productivity & Durability
Drill faster and straighter with our patented HD712 drifter.

Compact valve design

Newly designed piston

Dual damper

Integrated Drilling System

IDS : All-hydraulic drilling controls allow
for automatic adjustment of impact force
Dual-damper system DDS Compact valve design Reverse percussion system and feed force to match changing of rock
formations.
FRD has developed the Dual-Damper The FURUKAWA HD700 series drifter is The Reverse Percussion System (RPS) IDS-2 as optional devise, is monitoring
System, a first in the industry. For designed to minimize drill noise and makes it easier to free a stuck rod. rock conditions and automatically adjust
maximum energy transfer, active DDS vibration without sacrificing performance. A substantial increase in extraction force feed speed.
minimizes return of shock waves by Incorporating a new piston design, the allows the field proven RPS (optional) to Dual-Damper System provides maximum
keeping the bit firmly against the rock at all HD712 drifter maximizes energy remove struck rods quickly. impact energy transfer, and minimizes
times during drilling. Active DDS minimizes transmission and drills effectively in a energy of return shock wave.
percussion energy loss and by optimizing variety of rock types. Working together, these integrated
the overall feed force, greatly improves the systems are the keys to highest-possible
life of drilling accessories. An additional drilling performance at low running cost.
benefit is greatly improved life of drilling
accessories.
（U.S. PATENT No.5,896,937）

3 4
 Maximizes operator performance with the ultim ate in drilling technology.
Newly designed economy mode
By using power-saving switch, fuel consumption is reduced during “light”
work conditions. （Maximum 30 % reduction on previous models.）
While drilling, Engine speed can be adjusted lower than power mode.
Engine speed can be selected from one of following speed.
Engine speed select switch
“Light” work 1,600 min-1
↑ 1,800 min-1 New economy mode
( Have a choice from 3 types of power )
According to 2,200 min-1
rock condition
↓ 2,500 min-1 Power mode
( Previous model has only this mode for drilling )
“Hard” work Power-saving switch

For the hole cleaning, Engine speed automatically increases up 2,500 min-1.
As a result, even in economy mode, you can realize the perfect cleaning as power mode does.

Meter panel Drilling position indicator

Engine Diagnostic Monitor Hydraulic Temperature (High) Normal forward position
Fast forward position
Engine fault lamp Compressor overheat

Engine diagnostic lamp Hydraulic oil temperature (Low) Normal backward position
Fast backward position
Pre heat lamp Hydraulic oil filter
Normal rotation position
Warning lights Air cleaner
Reverse rotation position
Alternator (charge)
Collaring position
Hydraulic oil level alarm Regular drilling position

Powerful CUMMINS engine is fully compliant with Tire3 / Engine Fault

The warning lamp indicates a serious malfunction in the engine.
Engine Diagnosis
Euro stage-3 emission control. It gives full control for easy This alert indicator is used to indicate the existence of active fault in the engine with
flashing codes.
drilling.
Easy handling rod changer Rod changer control lever
Low-emission engine Thanks to advanced hydraulic and pneumatic technology,
output energy can be transferred to each component with
minimum power loss. These systems support high
productivity.

Digital engine indicator

Easy check engine condition in the Cab.
●Engine rpm
●Engine hour meter
●Engine coolant temp
●Engine oil pressure etc.
Rod changer adjusting panel

Engine throttle control

Starter Switch
Adjust the engine speed. Permits the operator to add and withdraw rods using a
① ② ③ ④ ⑤ ⑥
Position Ⅰ: 1,250 min-1 single lever, and to select which rods in the rack to use, ( Joystick
Position Ⅱ: 1,600 min-1 type ) ① Manual / Auto selector switch
thereby spreading the wear evenly among all the rods ② Swing switch
CAUTION Position Ⅲ: 1,800 min-1
Position Ⅳ: 2,200 min-1 in the rack and helping to reduce costs. ③ Clamp(F) switch
The diesel fuel quality greatly affects the performance and
life of the engine. Use only clean, high quality fuel. Position Ⅴ: 2,500 min-1 ④ Clamp(R) switch
⑤ Slide switch
⑥ Rotating switch

5 6
 Easy operation and improved - reliability
Left side control box Right side control box

② ④ ⑥ ⑦ ⑧ ⑨
⑩ ⑫ ⑭ ⑬ ⑫ ⑪
⑨ ⑪ ① ⑤
⑧ ②
⑦ ⑥
⑩
① ③ ⑤ ③ ④
⑬ ⑭
⑮

① Rod changer control lever ⑨ Rear work light switch ① Joystick drilling lever
② Air flushing lever ⑩ Compressor starting switch ② Horn switch
③ Greasing switch ⑪ Front wiper switch ③ Feed speed adjusting control dial
④ Hood & Centralizer switch ⑫ Roof wiper switch ④ Feed pressure adjusting control dial
⑤ Mode selector switch ⑬ Safety lock lever ⑤ Hydraulic cylinder control panel
⑥ Anti-jamming switch ⑭ Emergency stop switch
⑦ Traveling speed switch ⑮ Door unlock lever ⑤ 2 boom speed
⑧ Headlight switch ⑥ Operating speed selector

Anti-jamming device ① ② ③ ④
① Boom slide / Guide rotary (if equipped) ③ Guide tilt / Guide swing
An anti-jamming device optimizes ② Oscillating / Guide slide ④ Boom lift / Boom swing
the drilling condition for a variety of ⑥ Indicator switch
rock types, thus offering extended bit ⑦ Collaring pressure adjusting dial
⑧ Regular drilling pressure adjusting dial
and rod life, and consequent ⑨ Rod revolutions adjusting dial
reduction in running cost. ⑩ Air conditioner control panel
⑪ Engine throttle switch
Mode selector ⑫ Starter switch
High capacity compressor & Dust collector A mode switching hydraulic circuit
⑬ Diagnostic switch
⑭ Drink holder
performs switching between N mode
High out-put compressor Easy to check hole for homogeneous rocks and H mode
increases flushing for hard rocks, thus enabling safe Joystick operation
air,provides faster drilling and Sliding suction cap can be raised to and speedy drilling. A single multi-function lever controls all the
decreases bit wear. The allow a fast visual check of operation.
drilling functions.
upgraded dust collector has a Pillar mounted gauges
suction capacity. The dust Pull-Drilling Specification
Pressure gauge installed
collector includes an effective ( standard )
to center pillar. Easily
pre-cleaner to reduce the Greaser nozzle ①
⑩ checkable from sitting
escape available for difficult position.
drilling conditions.
②
① Monitor panel
③ ② Drilling position indicator
③ Compressor discharge
Centralizer ④ temperature gauge
⑤ ④ Hydraulic oil temperature gauge
⑤ Digital engine indicator
⑥ Impact pressure gauge
⑥ ⑦ Feed force pressure gauge
⑧ Rotation pressure gauge ① Impact (collaring) and feed forward
⑦ ⑨ Flushing air pressure gauge Normal rotation position
⑧ ⑩⑪ Leveler Reverse rotation ② Impact (regular drilling) and feed
Slide suction cap ⑪ forward position
⑨ ③ Feed forward position (fast)
Impact switch ④ Feed backward position
⑤ Feed backward position (fast)
Dust collector Pre-cleaner

7 8
 Maneuverability, Safety & Visibility Minimizes operator fatigue
IMS （Intelligent Monitoring System） Extension boom
Boom extension length : 1200mm
Extension boom increases pattern
flexibility.

IMS is a multi-display unit. When the engine is

started, the machine conditions and operating
troubles are indicated on the information display.
(optional equipment)

ＩＭＳ-Ⅰ Display
IMS-ⅠI indicates the operating Heavy duty undercarriage &
troubles and the maintenance
information being required on the oscillating
information display.
etc Heavy-duty track flames provide strength and
Comfortable cab ＩＭＳ-Ⅱ
durability. One-piece drive sprockets are
Display manufactured with hardened surfaces for longer
1100 mm wide cab provides large windows at the front and on the right side maximize IMS-Ⅱ displays the information on life. Heavy-duty track links are forged from high-
operator visibility. Cab is air conditioned and pressurized with filter air to keep out dust. periodical check and maintenance. manganese alloy steel, and pins and bushings
＊ROPS： Roll-Over Protective Structures FOPS： Falling-Object Protective Structures etc are induction-hardened. Standard full track
guards protect undercarriage, Track tension can

Air conditioner Operator seat Travel levers be adjusted easily with a grease gun.
The entire machine oscillates up-down 7.5
Control panel degrees total 15 degree to maintain machine
level.
② ⑥ ③
Forward
Backward

① ⑤ ④ Front blow
Oscillating cylinder
① Temperature control switch Oscillating cylinder
② Mode selector switch Unlock Lock position

Front Blow Front / Rear Blow Foot Blow Suspension seat Forward
③ Internal / external air selector switch
④ Fan switch
⑤ OFF switch Rear blow AM/FM radio Safety lock lever
Backward
⑥ Air conditioning switch Independent track oscillation provides safe tramming in
any time.
Air-con filter
External air filter

Foot blow Safety equipment is provided. without track oscillation

9 10
 Easy Maintenance & Safety Functions.
Wear plate
Accessibility All daily maintenance can be performed at ground level. Gas-assisted dampers allow the
for hinged service doors to be opened easily for access to all required maintenance
maintenance requirements.

Access to the right side cover

Synthetic ware plates for Fully opened access cover makes access to the
drifter carriage. radiator, the dust collector, the grease can and the
Double hose reels drilling control valves easier.

Access to the left side cover

Extends hose life, ensures Service for the engine, the electric control panel and
longer service life and the compressor can be made from the left side
reduces service load.
access cover.
Fire extinguisher

Access to the radiator grille

Services for all the heat-exchangers and the batteries
Located at rear-right-side of are carried out form the rear access cover. Cleaning
the cab. of the radiator or the cooler fins can be made form
the ground level.
Evacuation hammer Showing pictures including optional equipments.

Access to the upper cover

Service for the engine top and the dust collector drive
are within the reach.

For Safety equipment Hoses and piping clearly accessible for

Fan guards Safety lock lever Head guards Emergency stop Maintenance
Lock

Unlock

Fan guards and belt Stops the traveling function Roof is reinforced and Stops the engine in an
guards are standard. and the function of the overhead window is steel emergency.
drifter’s feed operation. gauge protected.

11 12
 ■ Standard & Optional equipments ■ Specifications ■ Dimensions （mm）
Ｕｎｉｔ ＨＣＲ１２００­ＥＤⅡ Ｍｏｄｅｌ ＨＣＲ１２００-ＥＤⅡ
Drifter Weight & Dimensions
HD712 Standard
Operating weight with ROPS/FOPS cab 14,700 kg
Dual-Damper system Standard
Reverse Percussion Optional Overall length 9,975 mm
Guide shell Overall width 3,125 mm
Hydraulic centralizer Standard Width over tracks 2,400 mm
Slidable suction hood Standard Overall height 3,605 mm
Open-Close + Slidable suction hood Optional Overall height (transportation) 2,975 mm
Resinous wear plate for carriage Standard
Drifter
Rod changer
Length of rod 12 ft 10 ft Select
Model HD712
45R (T45) Standard Weight 220 kg
Rod size
38R/38H(T38), 51R (T51) Optional Impact rate 2,300 min-1
MM / MF rod Select Number of rotation 0 - 190 min-1
Boom Undercarriage
Extendable boom Standard
Guide rotary Optional
Track length 3,480 mm
Ground contact length 2,780 mm
Undercarriage
Triple shoe Standard Width of shoe 330 mm
Single shoe
Lifting eyes for transportation
Optional
Optional
Grand clearance
Oscillating angle
460 mm
±7.5°
■ Drilling coverage
Dust collector Traveling speed 0 - 3.1 km/h Horizontal drilling coverage
Pre-cleaner Standard Gradability
Vertical drilling coverage
57.7% (30°)
Folding bracket for pre-cleaner Optional
Exhaust shutter Standard Engine
Sinter-lamellar filter Optional Make & Model Cummins QSB6.7
Cab Turbocharged and air to air after
ROPS/FOPS cab Standard Type cooled diesel,
Suspension seat Standard direct fuel injection, electric governor
AM/FM radio Standard 179 kW / 2,500 min-1
Intelligent monitoring system Optional Output / speed
Meets Tier-3 and EU stage-3
Intellligent monitoring system 2 Optional
Side door mirror Standard Fuel tank capacity 420 Liters
Air conditioner Standard Hydraulic pump
Rotating light（Yellow） Optional Variable displacement piston pump 2
Leveler Standard
Gear pump 3
Seat belt Standard
Rear view monitoring camera（Black/white) Optional Hydraulic oil tank capacity 215 Liters
Rear view monitoring camera（Color) Optional Compressor
Additional lights（ 70 W x 2 ） Optional
Model PDS265-S35D (AIRMAN)
Catwalk Standard
Folding catwalk Optional Type Screw 1-stage Compression oil-cooled
Evacuation hammer Standard Free air delivery 7.8 m3/min
Control Working air pressure 1.03 MPa
Push switch for boom control Standard Boom
Lever-operated switch for boom control Optional
Model JE326-132
Joystick control for impact, feed and rotation Standard
Integrated Drilling System（IDS） Standard
Type Extendable boom
Active dual damper Standard Boom lift angle Up 45° Down 20°
Anti-jamming system for air flow Standard Boom swing angle Right 35° Left 5°
Anti-jamming system for air pressure Standard Boom extension length 1,200 mm
Anti-jamming system for rotation pressure Standard
Joystick controlled rod changer Standard
Guide shell
Model GH832-30
■ Optional equipment
Manual over-ride for rod changer Standard
2 Boom speed Standard Length 7,800 mm
2 Travelling speed Standard Feed length 4,620 mm
Automatic equalizer lock Standard
Feed length with R/P 4,440 mm
Back-up alarm Standard
Auto throttle control for impact and air flow Standard Guide slide length 1,200 mm
Others Guide swing Right30° Left90°
Guide tilt angle indicator by pendulum Standard Guide tilt angle 170°
Guide swing angle indicator by pendulum Optional Guide rotary Option
2 Dimensional electric angle indicator Optional Max. rod pull force 29.5 kN
3 Dimensional electric angle indicator Optional Feed type Hydraulically operated chain drive Guide swing angle indicator by 2 dimensional electric angle 3 dimensional electric angle Single shoe Folding catwalk
3 Dimensional electric angle indicator with pendulum indicator indicator with drilling depth and
Optional
drilling depth and inclination Dust collector inclination
Water tank for water injection system Optional Suction capacity 30 m3/min
Emergency shut down system Optional
Number of filter 5
Hour meter for engine Standard
Hour meter for drifter Optional Rod changer
Tool box Optional Loaded rod capacity 6
Heavy duty under cover Optional Length of rod 3,660 mm (12 ft.)
Ladder for access rear engine cover Optional
Bumper base Optional
Control lever 1
Water separator for engine Standard Bit & Rod
Pre cleaner for engine Standard Recommended bit diameter 76 - 102 mm
Auto air release valve for compressor Optional
Type of bit Cross, Button, Ballistic, Conical Additional lights（ 70 W x 2 ） Water tank for water injection Emergency shut down system Rear view monitoring camera Ladder for access rear engine
Winter package for anti-freeze Optional
Size of rod 38R, 38H, 45R, (51R) Tool box system cover
High capacity battery Optional
Energy-saving mode selector Optional Length of rod 3,660 mm (12 ft.)
Starter rod (Max) 4,270 mm (14 ft.)
The contents of this specifications are subject to change without notice in the future.

13 14