Common Wealth Application 2022
Common Wealth Application 2022
Common Wealth Application 2022
EParam=m_OmK8apOTBsFiOHYXvfzSfVyMxCfmcKJYGQuTykhqT8HGB…
Reference # 6098854
Status Complete
deadlineA BeforeDeadline
Award_sought Doctoral
Candidate's ID 6098854
Title Mr.
Town/City Lagos
State/Province/County Lagos
Country Nigeria
Permanent Lagos
State/Province/County
Nationality/Citizenship (or Nigeria
country in which you
have been given refugee
status)
Gender Male
Years in country of 23
residence (please leave
blank if you prefer not to
say)
https://fs29.formsite.com/res/showSuccessPage?EParam=m_OmK8apOTBsFiOHYXvfzSfVyMxCfmcKJYGQuTykhqT8HGBTVj0J-Y1on2ZaVQ4m… 1/6
10/31/21, 7:54 AM https://fs29.formsite.com/res/showSuccessPage?EParam=m_OmK8apOTBsFiOHYXvfzSfVyMxCfmcKJYGQuTykhqT8HGB…
Do you have children? Yes
Ages of accompanying 4
children
outside home country the University of Sussex. This was not a full
Publication 2 Inemugha, D., & Ajienka A, J. (2020). Hydrate Management - Effect of Water Cuts on the Cool Down. International Journal of Engineering
Academic distinctions Best Hardworking student School of Engineering and Informatics as voted for by the students - University of Sussex
and prizes
72% in my MEng Group Project
https://fs29.formsite.com/res/showSuccessPage?EParam=m_OmK8apOTBsFiOHYXvfzSfVyMxCfmcKJYGQuTykhqT8HGBTVj0J-Y1on2ZaVQ4m… 2/6
10/31/21, 7:54 AM https://fs29.formsite.com/res/showSuccessPage?EParam=m_OmK8apOTBsFiOHYXvfzSfVyMxCfmcKJYGQuTykhqT8HGB…
Area of your current Science, engineering and technology (e.g. chemist, geologist, social scientist, software engineer)
employment
Employment 1 Main • In cooperation with requesting departments, execute the planning, tender processes, negotiation and maintenance of the assigned agree
Responsibilities • Develop, implement, and maintain Total Cost of Ownership (TCO) / Life-Cycle Cost (LCC) models for assigned product and services and
• Maintain the Frame Agreement repository on SharePoint, to allow easy overview and keep track of Frame Agreements options and expira
• Act as trouble shooter and liaison between the suppliers and the requesting departments and develop a constructive cooperation with all
Employment 2 Main • Experience in the preparation and review of general arrangement, detail drawings and P&IDs.
Responsibilities • Working with the project team, I managed and improved on one of the key project management tools thereby enhancing team productivity
• Working with the Material Supervisor in both ABO and Sendje Berge FPSO, I ensured that all stocks items are safely and efficiently store
What is the Job Title of Director, Centre of Excellence in Marine and Offshore Engineering, Rivers State University
Referee 2?
https://fs29.formsite.com/res/showSuccessPage?EParam=m_OmK8apOTBsFiOHYXvfzSfVyMxCfmcKJYGQuTykhqT8HGBTVj0J-Y1on2ZaVQ4m… 3/6
10/31/21, 7:54 AM https://fs29.formsite.com/res/showSuccessPage?EParam=m_OmK8apOTBsFiOHYXvfzSfVyMxCfmcKJYGQuTykhqT8HGB…
First Sustainable 9. Industry, Innovation and Infrastructure
Development Goal
Development Impact part Slender marine structures such as risers, underwater pipelines, mooring cables, umbilicals and tethers play crucial roles in global offshore
1 vibrations (VIV), which occur more often with the increased water depth, accelerate the fatigue damage of undersea structures and
limits the service life of overall subsea systems. There are still considerable
uncertainties and discrepancies in the theoretical‐experimental comparison of VIV response predictions, and this results in the overestimat
produce substantial costs in offshore operations.
The key objective of my research on VIV of slender marine structures is to develop effective methods for VIV mitigation. Specifically, a new
Various techniques including CFD will be employed to carry out this study.
Development Impact part Nigeria heavily depends on manpower importation because we lack the skills to develop, manage and operate both new and existing techn
2 My aim when I return home is to patent my idea and put Nigeria on the global map in Subsea Systems Manufacturing and technology. In th
Development Impact part My aim is to solve the Vortex Induced vibration (VIV) challenge on subsea risers and propose a new design for buoyancy modules. In term
3 of development following my studies, I am aiming to put Nigeria on the global map in subsea systems technology. I will start with patenting
Development Impact part The impact of my work will be measured by how many unemployed Nigerian graduates I employ and train. It could also be measured by ho
4 innovation. My work could also be measured by the impact it will have on the Nigerian Economy. The impact of my work could be measure
Objectives during the My career plan once I return home is to search for investors who would invest in my idea. I would set up a subsea systems technology and
award My ultimate aim is to see my ideas and innovations come to life and contribute
Career plans in the 5 In the next 5 years, I hope to get a grip in my business financially. I also hope to set up my business branches in Nigeria and Africa. I will
years following the award also want to set up other research and innovation centres in sustainable subsea systems and facilities.
Long-term Career Plans My long terms career plan is to employ as many Nigerians as possible. Driving the Nigerian Economy forward is my aim. It is also my long
Why have you chosen These institutions are tops in the UK for industry connections and employability. Their Graduate School coupled with internationally recogn
these institutions? improvements in the quality of life, supporting more innovative businesses, unlocking cultural creativity and contributing towards a more
successful and sustainable economy. Research conducted in these institutions focuses on advancing knowledge and solving real societal c
Contact with the I have interviewed with all 3 institutions and obtained conditional admissions to all 3 of them. The only condition left for me to meet is to pro
institutions
Details of the discussion I have discussed my plan of study with all three of my proposed supervisors and they have accepted to supervise me. I have also sent them
Research outline Slender marine structures such as risers play crucial roles in global offshore exploration, installation and production activities. The vortex in
accelerate the fatigue damage of undersea structures and limits the service life of overall subsea systems. There are still considerable unc
response predictions, and this results in the overestimated structural design
and the overuse of VIV control devices which, in turn, produce substantial costs in offshore operations.
The key objective of this research on VIV of slender marine structures is to develop effective methods for VIV mitigation. Specifically, a new
Vortex Induced Vibration (VIV) is one of such phenomena capable of marine riser and wellhead fatigue damage. It often occurs mainly as a
Module) that causes cyclic shedding of vortices in the wake of the riser. This can also lead to increased drag on the riser (Campbell & Togn
Helical Strakes and Fairings are the two most widely used systems in reducing/mitigating VIV on risers but the cost associated with the har
Buoyancy Modules (BMs) are often used on risers to reduce its effective weight. As a result, its top tension is also reduced. This can in turn
the potential for a lock-in to occur increases.
Recently, Trelleborg Offshore unveiled a new drill riser buoyancy module design. They claimed that their tri helical grooves formed into the
employed, they were able to simulate in 3D the buoyancy module hydrodynamic behaviour at Reynolds number Re = 1 × 106. This perform
Trelleborg's design showed significant reduction of VIV on risers. However, the minimal removal of material associated with the grooves co
This work will aim to design and carry out a CFD approach study of different buoyancy module configuration with the overall aim of
proposing an improved design for buoyancy modules in order to reduce/mitigate against VIV on deepwater risers whilst maintaining its buo
https://fs29.formsite.com/res/showSuccessPage?EParam=m_OmK8apOTBsFiOHYXvfzSfVyMxCfmcKJYGQuTykhqT8HGBTVj0J-Y1on2ZaVQ4m… 4/6
10/31/21, 7:54 AM https://fs29.formsite.com/res/showSuccessPage?EParam=m_OmK8apOTBsFiOHYXvfzSfVyMxCfmcKJYGQuTykhqT8HGB…
The key objective of this research on VIV of slender marine structures is to develop effective methods for VIV mitigation. Specifically, a new
Various techniques including CFD will be employed to carry out this study.
• Investigate the dynamics of VIV on risers and analyze existing design of buoyancy modules in terms of VIV mitigation/reduction on risers.
• Understand the primary parameters in quantifying the VIV mitigation performance of buoyancy modules.
• Carry out a CFD analyses of different buoyancy module configuration with a view of proposing the best fit design in terms of the VIV mitig
• Benchmark and compare results against the performance of conventional designs as well as the recent tri helical groove design of Trelleb
5.0 METHODOLOGY
An extensive literature review of CFD analysis on VIV and its mitigation/reduction on deepwater risers would be done to have an in-depth k
This will be done using libraries, internet, and discussions with experts in the industry. Different configuration of buoyancy modules and its
Field data will be sourced from different buoyancy modules and risers manufacturing companies to carry out a field data analysis in order to
As seen in the literature, Trelleborg Offshore used CFD Analysis in simulating the performance of their new tri helical groove buoyancy mod
the different buoyancy module designs of this work. Although experimental methods have proven to give effective relationship and results b
References
Campbell, M. & Tognarelli, M., 2010. Drilling Riser VIV: Fact or Fiction?. Louisiana, Society of Petroleum Engineers.
Lai, L. S. H., 2018. CFD Hydrodynamic Comparison between Conventional and VIV Mitigating Buoyancy Modules. Texas, IADC/SPE Drillin
Trelleborg Offshore, 2018. Performance at Every Level - Trelleborg Offshore Products and Solutions , Retford: Trelleborg Offshore.
Keyword 3 CFD
Personal Statement I come from an average family background. My father was a civil servant (now retired) who worked tirelessly to provide good education for
actions by the lecturers. This was a terrible experience for him from what I saw.
I decided that I would not want to study in Nigeria and I would like to get quality university education in the UK so I discussed this with my f
worry and that I would work very hard to get a scholarship.
I applied and got a Chancellors' Scholarship from the University of Sussex in form of a £3000 tuition fee deduction. I thought with this my fa
Coming back to Nigeria, I saw that the level of unemployment was at an alarming rate. So many Nigerian graduates are unemployed. My e
abroad. We never produce anything of our own. This is one of the reasons our lecturers are owed salaries for years and the consequence
It has always been my dream to contribute positively to the development of Nigeria and to the world at large. I observed from a very young
for the development of the modern society. This was why I decided to study mechanical engineering to the master’s level (MEng) at the Un
drive the most disadvantage nations towards becoming a developed country. In this way I hope to create jobs for many Nigerians and
I have also just completed a second masters degree in subsea & offshore engineering from the Shell Joint Venture (JV) Centre of
Excellence in Marine & Offshore Engineering, Rivers State University. Although I am still yet to receive my degree certificate. The centre is
I am now in a very good position academically to pursue and successfully complete a PhD in the UK. With your support, I strongly believe t
Voluntary and Leadership I have volunteered as a students' representative at the University of Sussex
Experience where I welcomed new students and showed them the way around whenever they have difficulty settling in.
Coming back to Nigeria, I noticed many Nigerian graduates do not even know how to operate a computer so I dedicated my Saturdays in te
During my second masters degree, I interned at BW Offshore where working with the project manager, I handled core meetings with contra
On my return to the office I developed an excel code for tracking projects' progress. This helped in increasing the overall efficiency of the co
Citizenship I confirm that I am a Commonwealth citizen of or have been granted refugee status in
Country Nigeria
Own work I confirm that all information in this application is true to the best of my knowledge and, unless otherwise stated, is my own work
Date 12/10/2021
https://fs29.formsite.com/res/showSuccessPage?EParam=m_OmK8apOTBsFiOHYXvfzSfVyMxCfmcKJYGQuTykhqT8HGBTVj0J-Y1on2ZaVQ4m… 5/6
10/31/21, 7:54 AM https://fs29.formsite.com/res/showSuccessPage?EParam=m_OmK8apOTBsFiOHYXvfzSfVyMxCfmcKJYGQuTykhqT8HGB…
Do you want to send/re- yes
send Referee 2 an email
requesting a reference
when you submit?
IP 105.112.50.1
Browser Chrome
Device Desktop
Referrer https://fs29.formsite.com/res/formLoginReturn;jsessionid=CB0565AF0D399D13D7DFC2343752105C;jsessionid=CB0565AF0D399D13D7
https://fs29.formsite.com/res/showSuccessPage?EParam=m_OmK8apOTBsFiOHYXvfzSfVyMxCfmcKJYGQuTykhqT8HGBTVj0J-Y1on2ZaVQ4m… 6/6