MS-7 Series: Addressable Devices

Addressable Devices
MS-7 Series
Manual Fire Alarm Pull Stations
General
The Gamewell-FCI, MS-7 Series manual fire alarm pull stations are available in a wide
variety of configurations. The pull stations comply with the Americans with Disabilities
Act (ADA) 5-lb. maximum pull force requirement. Operating instructions and Braille
text are engraved in the handle. All pull stations include a key lock/reset which is keyed
alike with the Gamewell-FCI fire alarm control panels and other manual fire alarm pull
stations.
MS-7AF Velociti Addressable Station

The MS-7AF Velociti® Series addressable station is a double action pull station
designed for installation in the signaling line circuit of Gamewell-FCI analog
addressable control panels. Activation of the pull station causes its assigned address
to register at the fire alarm control panel. The door contains an LED which flashes
green in normal condition and lights steady red when the station has been activated.*
The station features screw terminals. MS-7 Series
MS-7ASF Velociti Addressable Station
The MS-7ASF Velociti® Series addressable pull station is a single action station
designed for installation in the signaling line circuit of Gamewell-FCI analog
addressable control panels. Activation of the station causes its assigned address to
register at the control panel. The door contains an LED which flashes green in normal condition and lights steady red when the pull station is
activated.* The station features screw terminals.
The Velociti® Series pull stations use a communication protocol that substantially increases the speed of communication between the sensors
and certain Gamewell-FCI analog addressable fire alarm controls. These devices operate in a grouped fashion. If one of the devices in the
group has a status change, the panel’s microprocessor stops the group poll and focuses on the single device. The net effect offers a response
speed up to five times greater than earlier designs.
MS-7 Double Action Station

The MS-7 double action pull station is used with conventional fire alarm control panels. It features a set of single pole contacts and screw
terminals for connection to an initiating circuit.
FEATURES & BENEFITS

• Addressable stations • The pull stations (MS- • Offers surface or semi- • Includes a tumbler lock *Only the red LED is
compatible with all 7LOB) are Listed for flush mounting for test and reset keyed operative in panels that
Gamewell-FCI analog outdoor applications alike with analog do not operate in Velociti
addressable fire alarm • Shock and vibration addressable fire alarm mode
controls • Complies with ADA pull resistant controls
force requirements
• Conventional stations • Both single and double
suitable for use with action pull stations
available
any UL® Listed control
panel
MS-7S Single Action Station NYC-Plate
The MS-7S single action pull station is used with The NYC-Plate provides the backplate for the manual
conventional fire alarm control panels. It features a set pull station. (See Figure 1).
of single pole contacts and wire leads for connection to
an initiating circuit.
MS-7SP Double Action Station

The MS-7SP is a double action pull station similar to
the MS-7 station, with the additional feature of
including both English and Spanish instructions
molded into the unit.
MS-7LR Dual-action Agent Release Station

The MS-7LR is designed for use with the Gamewell-FCI
fire alarm control panels with releasing capabilities
and Flex Series releasing systems. It features a set of
single pole contacts and screw terminals used to
connect to an initiating circuit.
MS-7LRA Agent Release Station with Abort

Figure 1 NYC-Plate
The MS-7LRA is designed for use with the Gamewell-
FCI fire alarm control panels with releasing capabilities Ordering Information
and Flex Series releasing systems where system abort MS-7: Double action station
capabilities are required. It consists of the following:
MS-7AF**: Velociti addressable double action station
• An MS-7LR mounted on a plate with an abort switch
MS-7ASF**: Velociti addressable single action station
• LED indicators that signal system normal and
MS-7S: Single action station, wire leads
system activated status
MS-7SP: Double action station, English and Spanish
MS-7LOB Double Action Station (Listed for Outdoor
instructions
Applications)
The MS-7LOB station must be mounted on a Model MS-7LR: Agent release station, dual-action
SB-I/O backbox. In retrofit applications, the pull MS-7LRA: Agent release station with abort switch,
station is UL Listed for use with the WP-10 backbox. It LED indicators, dual- action
is intended for use with conventional control panels
MS-7LOB: Double action station, outdoor use
and has a set of single pole contacts and screw
(Includes SB-I/O - Indoor/outdoor use backbox)
terminals.
SB-I/O: Indoor/outdoor use backbackbox
Mounting
The MS-7 interior pull stations may be surface SB-10: Surface backbox
mounted or semi-flush mounted on a standard BG12TR: Trim ring for semi-flush mount, plastic
double-gang, or 4-inch (10.2 cm) square electrical box.
NY-PLATE: NYC backplate for manual pull station
An optional trim ring (BG12TR) may also be used for
**For use with the Gamewell-FCI analog addressable
semi-flush mounting.
control panels only.
2
MS-7 Series Technical Specifications
SYSTEMS STANDARDS For a complete listing of all
compliance approvals and
Material: Lexan® The MS-7 Series is designed to comply with the following certifications, please visit:
Contact Ratings: 0.25 amps. @ 30 VAC/VDC (resistive) standard: http://www.gamewell-
Dimensions: 5 5/8” H x 4 1/4” W x 1 1/4” D UL Standard: UL 864 9th Edition fci.com/en-US/
documentation/Pages/
(14 x 10.1 x 3.2 cm) AGENCY LISTINGS AND APPROVALS Listings.aspx
Operating Temperature: These listings and approvals apply to the modules LEXAN® is a registered
(MS-7AF, MS-7ASF): 32° to 120° F (0° to 49° C) specified in this document. In some cases, certain trademark of GE Plastics, a
(MS-7LOB): -30° to 150° F (-35° to 66° C) modules or applications may not be listed by certain subsidiary of General Electric
Relative Humidity : approval agencies, or listing may be in process. Company.
(MS-7AF, MS-7ASF): 10 to 93% (non-condensing) Consult factory for latest listing status.
Velociti® and Gamewell-FCI
(MS-7LOB): 85% ± 5% @ 86° ± 3.6° (30° ± 2° C) UL: S2465 are registered trademarks of
FM: 3023594 Honeywell International Inc.
Alarm Current: .0030 amp. 0.007 for LED
MEA FDNY: 67-02-E Vol. VII
Supervisory Current: UL® is a registered trademark
CSFM: of Underwriter’s Laboratories
(MS-7AF, MS-7ASF): .00030 amps.
7160-1703:0119 Inc.
TEMPERATURE AND HUMIDITY RANGES
7160-1703:0170
This system meets NFPA requirements for operation at 0 This document is not intended
7160-1703:0109 to be used for installation
– 49°C/32 – 120°F and at a relative humidity 93% ± 2%
RH (noncondensing) at 32°C ± 2°C (90°F ± 3°F). ISO 9001 Certification purposes. We try to keep our
product information up-to-
However, the useful life of the system's standby batteries
date and accurate. We cannot
and the electronic components may be adversely affected cover all specific applications
by extreme temperature ranges and humidity. Therefore, or anticipate all requirements.
it is recommended that this system and its peripherals be All specifications are subject to
installed in an environment with a normal room change without notice.
temperature of 15 – 27°C/60 – 80°F.
For more information

Learn more about Gamewell-FCI’s MS-7 Series and other
products available by visiting www.Gamewell-FCI.com
Honeywell Gamewell-FCI
12 Clintonville Road
Northford, CT 06472-1610
203.484.7161
9020-0616 | F | 11/17
www.honeywell.com ©2017 Honeywell International Inc.

MS-7 Series: Addressable Devices

Uploaded by

Copyright:

Available Formats

MS-7 Series: Addressable Devices

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

MS-7 Series: Addressable Devices

Uploaded by

Copyright:

Available Formats

Addressable Devices

MS-7AF Velociti Addressable Station

MS-7 Double Action Station

FEATURES & BENEFITS

MS-7SP Double Action Station

MS-7LR Dual-action Agent Release Station

MS-7LRA Agent Release Station with Abort

For more information

You might also like