MV AGUSTA

SPECIAL PARTS
F3 3 DRAGSTER 73
Exhaust 4 Exhaust 74
Levers 6 Accessories 76
Footpegs 8 Carbon 78
Caps 10 Racing Accessories 89
Accessories 11
Seats 15
Carbon 17
Protectors 24
TURIMSO VELOCE 95
Racing Accessories 27 Exhaust 96
Bags 40 Levers 98
Footpegs / Plateholders 99
Caps 100
Accessories 102
BRUTALE 42 Seats 105
Exhaust 43 Carbon 106
Levers 45 Protectors 108
Caps 47 Racing Accessories 110
Accessories 49 Mirrors / Bags 113
Carbon 52
Protectors 62
Racing Accessories 64
Mirrors / Plateholders 72
 Exhaust

Levers

Footpegs

Plateholders

Caps

Accessories

Seats

Carbon

Protectors

Racing Accessories

Bags

F3
F3 Exhaust
3 way Mv Agusta exhaust
Code: 8A00C2458
Stainless steel with black anodisation
MV Agusta logo lasered € 1.795,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION

3 way Mv Agusta exhaust

Code: 8A00C6850
Stainless steel and carbon
Metallic pin MV Agusta logo € 1.670,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION

3 way Mv Agusta exhaust

Code: 8A00C6851
Stainless steel with ceramic total black treatment
MV Agusta logo lasered € 1.670,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION 4
www.mgh.co.at
F3 Exhaust
3 way MV Agusta exhaust
Code: 8A00C6852
Ultra violet full titanium
MV Agusta logo lasered € 2.240,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION

Titanium conic silencer

Code: 8000C4535
Matte carbon fiber end cap
Racing version not homologated Preis auf Anfrage
Needs the ECU 8K00C3622 to be installed

ONLY COMPATIBLE WITH EURO 4 MODELS, IT

Dedicated ECU for the installation of SC Project

Code: 8K00C3622
exhaust code 8000C4535
Preis auf Anfrage

5
www.mgh.co.at
F3 Levers

Articulated front brake lever

Code: 8000C1312

Manufactured in CNC aluminum € 205,-

Personalized with Mv Agusta Corse logo
Black anodisation

Articulated clutch lever

Code: 8000C1323

Manufactured in CNC aluminum € 205

Personalized with Mv Agusta Corse logo
Black anodisation

6
www.mgh.co.at
F3 Levers

Clutch lever protection

Code: 8000C2869

Manufactured in CNC aluminium € 205,-

Personalized with Mv Agusta Corse logo
Black anodisation

Brake lever protection

Code: 8000C2870

Manufactured in CNC aluminium € 205,-

Personalized with Mv Agusta Corse logo
Black anodisation

7
www.mgh.co.at
F3 Footpegs
Adjustable footrest kit (pair) ergal T6
Code: SPKPA002F3
7075 black anodised, CNC machined and
personalised with MV Agusta Corse logo. € 850,-
Adjustable between six different positions, foot
pegs with special shape “non slip” and nylon
cap protectors
Carbon heel protection reduces damage to
boots
Offers the possibility to set the best position and
increases the feeling with gear/brake
With reverse gear box lever

ONLY COMPATIBLE WITH MODELS FROM 2012

TO 2017 EURO 3

Adjustable footrest kit (pair) ergal T6

Code: SPKPA001F3
7075 black anodised, CNC machined and
personalised with MV Agusta Corse logo. € 850
Adjustable between six different positions, foot
pegs with special shape “non slip” and nylon
cap protectors
Carbon heel protection reduces damage to
boots
Offers the possibility to set the best position and
increases the feeling with gear/brake

ONLY COMPATIBLE WITH MODELS FROM 2012

TO 2017 EURO 3
8
www.mgh.co.at
F3 Footpegs / Plateholders

Footrest kit
Code: 8000C1304

Manufactured in ergal T6 7075 € 125,-

Designed to improve grip
Perfectly compatible with the original footrests
Personalized with Mv Agusta Corse logo

Plate holder personalised with MV Agusta Cor-

Code: SPPTT001F3
se logo, it can be fixed for the OEM spare part,
aluminium made, it fits for the used plate dimen- € 148,-
sions in Europe
The kit includes the LED plate light but also the
standard light can be used, it fits for the standard
direction lights
REAR INDICATORS NOT INCLUDED

9
www.mgh.co.at
F3 Caps
Engine oil cap
Code: 8000C1638

Manufactured in ergal € 56,-

Personalized with Mv Agusta logo

Racing fuel tank cap

Code: 8000C1694

Manufactured in ergal € 143,-

Personalized with Mv Agusta logo

Mirror caps kit (left and right)

Code: 8000C2271

Manufactured in ergal T6 7075 € 59,-

Personalized with Mv Agusta Corse logo
Can be used to remove the original mirrors

10
www.mgh.co.at
F3 Accessories
Rear stand with silicone wheels This stand maintains its technical and design
qualities for a long time.
powder coated stainless steel
personalised with metal MV Agusta Corse
Equipped with interchangeable nylon pin Code: 8000C1286
mounted on bearings € 348,-
designed to support the weight of the bike
and the rider in competitions

Rear stand made in boxed steel

Code: 8000C3396

Powder coated € 528,-

Customized with MV Corse Logo on the side
It grants an optimum stability during
maintenance

Standard front fork stand with silicone

Code: SPCAK001BF
wheels
€ 339,-
Powder coated stainless steel
Personalised with metal MV Agusta Corse tag
Designed to support the bike during main
workshop/pit activities such as changing the
front forks
This stand maintains its technical and design
qualities for a long time. 11
www.mgh.co.at
F3 Accessories
Standard front stand with silicone Thanks to the high quality construction, this
wheels stand maintains its technical and design quali-
ties for a long time
Powder coated stainless steel
Personalised with metal MV Agusta Corse tag
Code: SPCAI001BF
Designed to support the weight of the bike
and the rider in intense and demanding situa-
€ 178,-
tions such as competitions

Red/grey bike cover for indoor

Code: SPBCX001F3

Made in stretch material, it completely covers € 188,-

the motorcycle, protecting it from dust and dirt
Customized with a logo on the side and the mo-
del logo in the passenger zone

HDPE (High Intensity Polyethylene) contai-

Code: SPOP350B
ner resistant to solvents and paints
€ 24,50
Essential for changing oil in the workshop or in
your own garage
Equipped with a discharge system with an-
ti-splash edge to prevent spillage during trans-
port or transfer
Dimensions: H90mm Ø330mm
12
www.mgh.co.at
F3 Accessories
MV Agusta personalized bike carpet
Code: SPBIKEMAT

100% absorbent fiber, no problem with oil or Preis auf Anfrage

gasoline, washable, UV-resistant, shock-resistant
and non-slip rubber back surface

Dimensions 80x250 cm

Carbon look fuel tank sticker

Code: SPADF3CAR

UVA resistant Preis auf Anfrage

Original design
Personalized with MV Corse logo
Dimensions 108,7 x 195,2

Camouflage fuel tank sticker

Code: SPADF3CAM

UVA resistant Preis auf Anfrage

Original design
Personalized with MV Corse logo
Dimensions 108,7 x 145,6

13
www.mgh.co.at
F3 Accessories

Fuel tank sticker

Code: SPADR002F3

Carbon look Preis auf Anfrage

UVA resistant
Personalized with Mv Agusta Corse logo
WHILE STOCK LAST
It protect the fuel tank from accidental scratches

Fuel tank sticker

Code: SPADR001F3

Transparent look Preis auf Anfrage

UVA resistant
Personalized with Mv Agusta Corse logo
It protect the fuel tank from accidental scratches

14
www.mgh.co.at
F3 Seats
Non-slip neoprene rider seat
Code: SPSAM001F3

Black leather sides € 193,-

Red embroidered and water resistant seams
Customized with embroidered Mv Agusta Corse
logo
Designed to improve grip on the seat and in-
crease driving comfort

Non-slip neoprene rider seat

Code: SPSAM002F3

Red leather sides € 193,-

White embroidered and water resistant seams
Customized with embroidered Mv Agusta Corse
logo
Designed to improve grip on the seat and in-
crease driving comfort

Non-slip neoprene rider seat

Code: SPSAM003F3

White leather sides € 193,-

Red embroidered and water resistant seams
Customized with embroidered Mv Agusta Corse
logo
Designed to improve grip on the seat and in-
crease driving comfort
15
www.mgh.co.at
F3 Seats
Red rear seat cover in fiberglass
Code: RDBD009099

It can be fitted instead passenger seat, by OEM € 419,-

lock system, to obtain „race design“.
Personalized with the logo Mv Agusta Corse

16
www.mgh.co.at
F3 Carbon

Lower chain guard in carbon fiber

Code: RDTL050018

Manufactured using the vacuum process, with € 226,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Upper chain guard in carbon fiber

Code: RDTL060018

Manufactured using the vacuum process, with € 289,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

17
www.mgh.co.at
F3 Carbon
Rear carbon mudguard
Code: RDTL092018

Manufactured using the vacuum process, with € 375,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to WHILE STOCK LAST
achieve with manual lamination

Front carbon mudguard

Code: RDTL091018

Manufactured using the vacuum process, with € 519,50

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Swingarm carbon cover

Code: RDTL095018

It protects swingarm in case of crash € 472,50

Manufactured using the vacuum process, with
high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

18
www.mgh.co.at
F3 Carbon
Swingarm cover in carbon fiber
Code: RDTL053018

Manufactured using the vacuum process, with Preis auf Anfrage

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Sprocket cover in carbon fiber

Code: RDTL054018

Manufactured using the vacuum process, with € 272,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Exhaust cover in carbon fiber

Code: RDTL081018

Hand painted and personalized with MV Agusta € 498,-

Corse logo
Manufactured using the vacuum process, with
high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination
ONLY FOR EURO 3 VERSION
19
www.mgh.co.at
F3 Carbon
Clutch cover protection in carbon fiber
Code: RDTL087018
Personalized with MV Agusta Corse logo € 253,-
Carbon-kevlar layer inside to increase the
protection
Manufactured using the vacuum process, with
high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Generator cover protection in carbon fiber

Code: RDTL086018

Personalized with MV Agusta Corse logo € 320,50

Manufactured using the vacuum process, with
high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Under windshield carbon cover

Code: RDTL052018

Personalized with Mv Agusta Corse logo € 237,-

Manufactured using the vacuum process, with
high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

20
www.mgh.co.at
F3 Carbon
Underseat carbon tail
Code: RDTL088018

Manufactured using the vacuum process, with € 599,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Left lower side fairing in carbon fiber

Code: RDTL056018B

Manufactured using the vacuum process, with € 422,-

high mechanical performance, high breaking
WHILE STOCK LAST
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Right lower side fairing in carbon fiber

Code: RDTL056018A

Manufactured using the vacuum process, with € 422,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

21
www.mgh.co.at
F3 Carbon
Left air box panel in carbon fiber
Code: RDTL058018B

Manufactured using the vacuum process, with € 219,50

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Right air box panel in carbon fiber

Code: RDTL058018A

Manufactured using the vacuum process, with € 219,50

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Right air box duct cover in carbon fiber

Code: RDTL057018A

UManufactured using the vacuum process, with € 225,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

22
www.mgh.co.at
F3 Carbon
Left air box duct cover in carbon fiber
Code: RDTL057018B

Manufactured using the vacuum process, with € 225,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Right air extractor in carbon fiber

Code: RDTL055018A

Manufactured using the vacuum process, with € 197,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Left air extractor in carbon fiber

Code: RDTL055018B

Manufactured using the vacuum process, with € 197,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

23
www.mgh.co.at
F3 Protectors
Front axel protectors
Code: SPPRA001RV
Manufactured in ergal T6 7075 € 99,-
Personalized with Mv Agusta Corse logo
Black anodisation

Clutch protection
Code: SPPCA001RV

Manufactured in ergal T6 7075 € 255,-

Personalised with MV Agusta Corse logo

Clutch protection
Code: SPPMT002BF

Manufactured in ergal T6 7075 € 283,-

Personalised with MV Agusta Corse logo

24
www.mgh.co.at
F3 Protectors
Alternator protection
Code: 8000C1328

Manufactured in ergal T6 7075 Preis auf Anfrage

Personalised with MV Agusta Corse logo

Handlebar weight kit

Code: SPPMN004BF

Manufactured in ergal T6 7075 € 67,50

Personalized with MV Corse laser logo

Sprocket cover made from solid light alloy by

Code: SPCP153R
CNC machines, and subsequent surface anodi-
zing. It replaces the original plastic, giving a € 183,-
racing and precious look. No modifications are
required for assembly.

25
www.mgh.co.at
F3 Protectors

Rear wheel protectors

Code: SPTP428R

Made from solid plastic and light alloy € 131,-

Protects the swingarm from accidental falls or
slips
Gives the bike a sportier design

Front wheel protection

Code: SPTP427R

Made from solid plastic and light alloy € 96,-

Protects the fork from accidental falls or slips
Gives the bike a more sporty design

26
www.mgh.co.at
F3 Racing Accessories
Transparent housing for MV Agusta 3-cy-
Code: SPCA301R
linder oil clutches, made of billet machined
aluminium. € 931,-

Transparency is obtained with a sheet of Lexan

resistant to shocks and temperatures, whose hy-
draulic seal is guaranteed by the use of a specific
o-ring.

Racing air filter

Code: RDMT002911

Designed to increase power and acceleration € 169,-

Perfectly interchangeable with the original filter
without any changes to the airbox
High air flow with excellent filtration

Slipper clutch
Code: 8000B8547

Made of aluminium alloy and steel € 759,50

This kit is recommended for those who use the
bike on the track
Eliminates rear wheel jumping when braking and
improves bike stability

27
www.mgh.co.at
F3 Racing Accessories
Ohlins linear steering damper specific for
Code: RDTL004312
F3
€ 1.012,10
Studied for sport riders that use their bike on the
road and on track
It reduces shaking of the front wheel and get a
better safety at high speed ride

Complete Ohlins Mono dedicated for F3

Code: 8000B6102
Stainless steel with ceramic total black treatment
New TTX upgrade based on winning products € 2.160,-
used in Moto GP, WSB and AMA
This new version is set to perfection with new
valves for a significant improvement in dynamics
and equipped with a completely new internal
piston
Ensures less friction and greater smoothnessn

Fiber glass solo seat unit

Code: RDTL016088

Dedicated to racing use € 526,50

Perfectly interchangeable with the original one WHILE STOCK LAST

28
www.mgh.co.at
F3 Racing Accessories
Right side fiberglass fairing
Code: RDTL013088

Dedicated to racing use € 271,95

Perfectly interchangeable with the original one
WHILE STOCK LAST

Left side fiberglass fairing

Code: RDTL014088

Dedicated to racing use € 271,95

Perfectly interchangeable with the original one
WHILE STOCK LAST

Front fairing fiber glass

Code: RDTL012088

Dedicated to racing use € 333,30

It allows the headlight to be removed WHILE STOCK LAST
Perfectly interchangeable with the original one

29
www.mgh.co.at
F3 Racing Accessories
Solid machined nuts in TITANIUM GR 5.
Code: SPDA385X

The kit consists of five nuts for fixing the cou- € 238,-
pling blocks housed in the transmission crown.
Each nut retains the dimensions of the originals
and are therefore perfectly interchangeable

Ducts cooling system braking GP Ducts

Code: SPZA701Y (Matte carbon)
developed in collaboration with the best Moto
SPZA701K (Glossy carbon)
GP and Superbike teams.
Stainless steel with ceramic total black treatment € 432,-
MV Agusta logo lasered
The kit is made by hand in 100% autoclave car-
bon fiber, and consists of two pieces

NEEDS THE ASSEMBLY KIT CODE SPZAB09B

Code: SPZAB09B
Mounting kit for front brake cooling ducts
€ 74,50

30
www.mgh.co.at
F3 Racing Accessories
Double Bubble screen
Code: SPWS204LS

More protective than the original thanks to the € 190,-

increased curvature, is made of 3mm acrylic
PMMA, cast and thermoformed
Can be mounted without any modification

Rear wheel nut in ergal perfectly interchange-

Code: SPDA397R
able with the original as it maintains the same
size and shape of the original. € 137,50

CNC machined from billet, coloured surface red

anodized

Front wheel axle nut machined from solid

Code: SPDA39R
light alloy by machines, and subsequent colou-
red surface anodizing. € 35,50

Measurements M25x1.25
Hexagonal wrench 28 mm

31
www.mgh.co.at
F3 Racing Accessories
Innovative right hand control integrated in
Code: SPSWM05B
the accelerator control
€ 484,-
The push-button panel body is machined from
7075 (Ergal) aluminium billet and then under-
goes a hard black anodizing process, which
enhances the work with numerically controlled
machines. The pushbuttons/switches used are
in compliance with military standard IP67, a
Red - ON/OFF switch standard that certifies the watertightness of the
push-button panel itself. The operation of each
Black - start button button is guaranteed for over 700,000 cycles.

Grey ON/OFF switch usable at will Plug&play assembly is very simple: just remove
the original push-button panel and the jumper of
the front brake pump with the necessary equip-
ment provided by Mv Agusta and assemble the
CNC Racing push-button panel by connecting
the plug to the original cable of the bike. There
is no need to intervene in any other way on the
bike and it is always possible to return to the
original configuration without any kind of modifi-
cation

32
www.mgh.co.at
F3 Racing Accessories
Racing push button panel that integrates
Code: SPSWM04B
the functions of the left and right push
button panels € 546,-

The push-button panel body is machined from

7075 (Ergal) aluminium billet and then under-
goes a hard black anodizing process, which
enhances the work with numerically controlled
machines. The pushbuttons/switches used are
Red - Start ON/OFF switch in compliance with military standard IP67, a
standard that certifies the watertightness of the
Grey - ON/OFF switch can be used at will push-button panel itself. The operation of each
button is guaranteed for over 700,000 cycles
Black - MODE
Plug&play assembly is very simple: just remove
Yellow - Set the original push button panel and the jumper of
the front brake pump with the necessary equip-
Green -Start button ment provided by Mv Agusta and assemble the
CNC Racing push button panel by connecting
the plug to the original cable of the bike. There
is no need to intervene in any other way on the
bike and it is always possible to return to the
original configuration without any kind of modifi-
cation

33
www.mgh.co.at
F3 Racing Accessories
Right hand control for Brembo CNC radial
Code: SPSWM03B
and forged brake master cylinders
€ 376,-
The push-button panel body is machined from
7075 (Ergal) aluminium billet and then under-
goes a hard black anodizing process, which
enhances the work with numerically controlled
machines. The pushbuttons/switches used are
in compliance with military standard IP67, a
Red - ON/OFF switch standard that certifies the watertightness of the
push-button panel itself. The operation of each
Black - Start button pushbutton is guaranteed for over 700,000 cyc-
les
Grey - ON/OFF switch can be used at will
Plug&play assembly is very simple: just remove
the original push button panel and the jumper of
the front brake pump with the necessary equip-
ment provided by Mv Agusta and assemble the
CNC Racing push button panel by connecting
the plug to the original cable of the bike. There
is no need to intervene in any other way on the
bike and it is always possible to return to the
original configuration without any kind of modifi-
cation

34
www.mgh.co.at
F3 Racing Accessories
The push-button panel body is machined from
Code: SPSWM01B
7075 (Ergal) aluminium billet and then under-
goes a hard black anodizing process, which € 567,-
enhances the work with numerically controlled
machines. The pushbuttons/switches used are
in compliance with military standard IP67, a
standard that certifies the watertightness of the
push-button panel itself. The operation of each
pushbutton is guaranteed for over 700,000 cyc-
FRONT BUTTONS les

Blue - High beam Plug&play assembly is very simple: just remove

the original push button panel and the jumper of
Grey - Right Arrow the front brake pump with the necessary equip-
ment provided by Mv Agusta and assemble the
Green - OK CNC Racing push button panel by connecting
the plug to the original cable of the bike. There
Black - Left Arrow is no need to intervene in any other way on the
bike and it is always possible to return to the
Yellow - Horn original configuration without any kind of modifi-
cation
REAR BUTTON

Red - Set

35
www.mgh.co.at
F3 Racing Accessories
Right hand control for Brembo CNC radial
Code: SPSWM02B
and forged brake master cylinders
€ 376,-
The push-button panel body is machined from
7075 (Ergal) aluminium billet and then under-
goes a hard black anodizing process, which
enhances the work with numerically controlled
machines. The pushbuttons/switches used are
in compliance with military standard IP67, a
Red - ON/OFF switch standard that certifies the watertightness of the
push-button panel itself. The operation of each
Black - Start button pushbutton is guaranteed for over 700,000 cyc-
les
Grey - ON/OFF switch can be used at will
Plug&play assembly is very simple: just remove
the original push button panel and the jumper of
the front brake pump with the necessary equip-
ment provided by Mv Agusta and assemble the
CNC Racing push button panel by connecting
the plug to the original cable of the bike. There
is no need to intervene in any other way on the
bike and it is always possible to return to the
original configuration without any kind of modifi-
cation

36
www.mgh.co.at
F3 Racing Accessories
Rear brake oil tank 20 ml with level portho-
Code: SPSEB20R
le machined from solid by cnc machines with
subsequent surface anodization which ensures € 258,-
quality and durability

THE CAP IS NOT INCLUDED

Rear brake fluid reservoir cap made from

Code: SPTF451B
light alloy solid with red surface anodising
€ 62,-
The kit includes all the screws for the application
Assembly is simple and does not require any
modification

Front brake oil tank machined from billet by

Code: SPSE501R
cnc machines with subsequent red surface anodi-
zation that guarantees quality and durability € 173,-

The kit includes three outputs (vertical, 45° and

90° inclination), two metal brackets and comple-
te gaskets

37
www.mgh.co.at
F3 Racing Accessories
Clutch oil tank machined from billet by cnc
Code: SPSE500R
machines with subsequent red surface anodiza-
tion that guarantees quality and durability € 173,-

The kit includes three outputs (vertical, 45° and

90° inclination), two metal brackets and comple-
te gaskets

Upper steering plate made from solid light

Code: SPPST06B
alloy with subsequent surface anodising.
€ 569,90
The geometry respects the angle of inclination of
the original plates.
The plate is supplied with lightened stainless
steel screws Ø 50 mm

Lower steering plate made from solid light

Code: SPPSB06B
alloy with subsequent surface anodising.
€ 624,50
The geometry respects the angle of inclination of
the original plates.
The plate is supplied with lightened stainless
steel screws Ø 54 mm

38
www.mgh.co.at
F3 Racing Accessories
Steering head made of steel
Code: SPPSA05B

THE STEERING HEAD CAN ONLY BE USED € 145,-

WITH OUR STEERING PLATE KITS

Rear sprocket flange machined from billet

Code: SPFL502R
ergal with subsequent treatment of surface red
anodization and carbon inserts. € 345,-

Lightness, design and reliability for a very visible

detail

Steering ring nut machined from solid light

Code: SPGH352R
alloy by means of number control machines, and
subsequent red coloured surface anodizing € 62,50

39
www.mgh.co.at
F3 Bags

Code: SPFBM001B4
Fuel tank bag base with embroided logo
€ 143,40
WHILE STOCK LAST

Fuel tank plane bag

Code: SPBSM004BF

Convertible into a backpack € 160,30

WHILE STOCK LAST
FOR FIXING IT IS NECESSARY TO USE WITH
FUEL TANK BAG BASE (CODE: SPFBM001B4)
SOLD SEPARATELY

Fuel tank small bag

Code: SPBSM005BF

It allows you to transport an iPad € 160,30

WHILE STOCK LAST
FOR FIXING IT IS NECESSARY TO USE WITH
FUEL TANK BAG BASE (CODE: SPFBM001B4)
SOLD SEPERATELY

40
www.mgh.co.at
F3 Bags

Fuel tank 24 hours bag

Code: SPBSM006BF

It allows you to carry a portable pc of 15‘‘ moni- € 278,40

tor
WHILE STOCK LAST
FOR FIXING IT IS NECESSARY TO USE WITH
FUEL TANK BAG BASE (CODE: SPFBM001B4)
SOLD SEPERATELY

Passenger seat bag

Code: SPBSM001F3

Capacity around 20 L € 227,70

Equipped with shoulder strap for easy transport
WHILE STOCK LAST
Embroidered with Mv Agusta logo

41
www.mgh.co.at
 Exhaust

Levers

Caps

Accessories

Carbon

Protectors

Racing Accessories

Mirrors

Plateholders

Brutale
BRUTALE Exhaust
3 way Mv Agusta exhaust
Code: 8000C2458
Stainless steel with black anodisation
MV Agusta logo lasered € 1.795,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION

3 way Mv Agusta exhaust

Code: 8000C6850
Stainless steel and carbon
Metallic pin MV Agusta logo € 1.926,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION

3 way Mv Agusta exhaust

Code: 8000C6851
Stainless steel with ceramic total black treatment
MV Agusta logo lasered € 1.926,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION 43
www.mgh.co.at
BRUTALE Exhaust
3 way MV Agusta exhaust
Code: 8000C6852
Ultra violet full titanium
MV Agusta logo lasered € 2.590,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION

Silencer kit with conical titanium body and matt

Code: RDMT1C4680
carbon fibre bottom, it combines the racing
aspect with sophisticated technical solutions € 1.900,-
such as bracket and fitting welds with T.I.G.
technology or solid titanium coupling bushings
obtained by means of CNC machines, which
guarantee impeccable coupling

The conical body of the S1, together with the

diameter of the outlet port and the special inter-
nal soundproofing, gives the bike on which it is
mounted a dark and unmistakable sound

The kit includes the dedicated ECU: Code: 8YO0C1722

- Compatible with Brutale 800 RR Pirelli edition
- For the assembly, it requires the right footrest
support protection code 8000C4850

44
www.mgh.co.at
BRUTALE Levers

Articulated clutch lever

Code: 8000C1322

Manufactured in CNC aluminum € 205,-

Personalized with MV Agusta Corse logo
Black anodisation

Articulated front brake lever

Code: 8000C1313

Manufactured in CNC aluminum € 205,-

Personalized with Mv Agusta Corse logo
Black anodisation

45
www.mgh.co.at
BRUTALE Levers

Clutch lever protection

Code: 8000C2869

Manufactured in CNC aluminium € 205,-

Personalized with Mv Agusta Corse logo
Black anodisation

Brake lever protection

Code: 8000C2870

Manufactured in CNC aluminium € 205,-

Personalized with Mv Agusta Corse logo
Black anodisation

46
www.mgh.co.at
BRUTALE Caps

Engine oil cap

Code: 8000C1638

Manufactured in ergal € 56,-

Personalized with Mv Agusta logo

Racing fuel tank cap

Code: 8000C1694

Manufactured in ergal € 143,-

Personalized with Mv Agusta logo

47
www.mgh.co.at
BRUTALE Caps
Brake pump ergal cap
Code: SPTVB001B3

Manufactured in ergal T6 7075 € 90,-

Personalized with laser serigraphy with MV
Agusta logo and „Brutale“

Brake pump ergal cap

Code: 8000C1696

Manufactured in ergal T6 7075 € 96,-

Personalized with laser serigraphy with MV
Agusta

Clutch pump ergal cap

Code: 8000C1697

Manufactured in ergal T6 7075 € 96,-

Personalized with laser serigraphy with MV
Agusta

48
www.mgh.co.at
BRUTALE Accessories
Rear stand with silicone wheels Thanks to the high quality construction, this
stand maintains its technical and design quali-
powder coated stainless steel ties for a long time
personalised with metal MV Agusta Corse
Equipped with interchangeable nylon pin
Code: 8000C1286
mounted on bearings
Designed to support the weight of the bike
€ 348,-
and the rider in competitions

Rear stand made in boxed steel

8000C3396

Powder coated € 528,-

Customized with MV Corse Logo on the side
It grants an optimum stability during
maintenance

Standard front stand with silicone wheel Thanks to the high quality construction, this
stand maintains its technical and design quali-
Powder coated stainless steel and personal- ties for a long time
ised with metal MV Agusta Corse tag
Designed to support the weight of the bike Code: SPCAI001BF
and the rider in intense and demanding situa-
tions such as competitions
€ 178,-

49
www.mgh.co.at
BRUTALE Accessories
Rear stand with silicone wheels Thanks to the high quality construction, this
stand maintains its technical and design quali-
powder coated stainless steel ties for a long time
personalised with metal MV Agusta Corse
Equipped with interchangeable nylon pin
Code: SPCAK001BF
mounted on bearings
Designed to support the weight of the bike
€ 339,-
and the rider in competitions

Red/grey bike cover for indoor

Code: SPBCX001B3

Made in stretch material, it completely covers € 169,-

the motorcycle, protecting it from dust and dirt
Customized with a logo on the side and the mo-
del logo in the passenger zone

HDPE (High Intensity Polyethylene) contai-

Code: SPOP350B
ner resistant to solvents and paints
€ 24,50
Essential for changing oil in the workshop or in
your own garage
Equipped with a discharge system with an-
ti-splash edge to prevent spillage during trans-
port or transfer
Dimensions: H90mm Ø330mm
50
www.mgh.co.at
BRUTALE Accessories
Mv Agusta personalized bike carpet
Code: SPBIKEMAT

100% absorbent fiber, no problem with oil or Preis auf Anfrage

gasoline, washable, UV-resistant, shock-resistant
and non-slip rubber back surface

Sizes 80x250 cm

Fuel tank sticker

Code: SPADR004B4

Carbon look Preis auf Anfrage

Personalized with Mv Agusta Corse logo
UVA resistant
It protect the fuel tank from accidental scratches

Fuel tank sticker

Code: SPADR003B4

Transparent Preis auf Anfrage

Personalized with Mv Agusta Corse logo
UVA resistant
It protect the fuel tank from accidental scratches

51
www.mgh.co.at
BRUTALE Carbon
Rear carbon mudguard
Code: RDTL059018A

Manufactured using the vacuum process, with € 310,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
WHILE STOCK LAST
achieve with manual lamination

Front carbon mudguard

Code: 80A0C2861

Manufactured using the vacuum process, with € 519,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Front mudguard spoiler in carbon fiber

Code: 80A0C2862

Manufactured using the vacuum process, with € 619,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

52
www.mgh.co.at
BRUTALE Carbon
Swingarm carbon cover
Code: RDTL095018

It protects swingarm in case of crash € 355,-

Manufactured using the vacuum process, with
high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Swingarm cover in carbon fiber

Code: RDTL053018

Manufactured using the vacuum process, with € 354,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Clutch cover in carbon fiber

Code: 80A0C1910

Manufactured using the vacuum process, with € 269,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

53
www.mgh.co.at
BRUTALE Carbon
Dashboard carbon cover
Code: 80A0C2467

Personalized with Mv Agusta Corse logo € 379,-

Manufactured using the vacuum process, with
high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Ignition lock cover in carbon fiber

Code: 80A0C2466

Manufactured using the vacuum process, with € 172,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Voltage regulator cover in carbon fiber

Code: 80A0C2865

Produced in autoclave, a process that applies € 278,-

different thermal cycles so that temperature and
pressure are distributed evenly, ensuring the pro-
duction of components of the highest quality

54
www.mgh.co.at
BRUTALE Carbon

Left air intake in carbon fiber

Code: 80A0C2461

Manufactured using the vacuum process, with € 610,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Right air intake in carbon fiber

Code: 80A0C2462

Manufactured using the vacuum process, with € 610,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

55
www.mgh.co.at
BRUTALE Carbon

Radiator cover in carbon fiber right side

Code: 80A0C2468

Manufactured using the vacuum process, with € 638,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Radiator cover in carbon fiber left side

Code: 80A0C2469

Manufactured using the vacuum process, with € 638,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

56
www.mgh.co.at
BRUTALE Carbon

Radiator cover in carbon fiber right side

Code: 80A0C2470 (glossy carbon)
8000C2470 (matt carbon)
Manufactured using the vacuum process, with
high mechanical performance, high breaking € 410,-
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Radiator cover in carbon fiber left side

Code: 80A0C2471 (glossy carbon)
8000C2471 (matt carbon)
Manufactured using the vacuum process, with
high mechanical performance, high breaking € 410,-
loads and an aesthetic effect that is difficult to
achieve with manual lamination

57
www.mgh.co.at
BRUTALE Carbon

Fuel tank panel in carbon fiber, left side

Code: 80A0C2463

Manufactured using the vacuum process, with € 172,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Fuel tank panel in carbon fiber, right side

Code: 80A0C2464

Manufactured using the vacuum process, with € 172,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

58
www.mgh.co.at
BRUTALE Carbon

Lower chain guard in carbon fiber

Code: RDTL050018

Manufactured using the vacuum process, with € 226,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Upper chain guard in carbon fiber

Code: RDTL060018

Manufactured using the vacuum process, with € 289,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

59
www.mgh.co.at
BRUTALE Carbon

Underseat cover left side in carbon fiber

Code: 80A0C2863

Produced in autoclave, a process that applies € 156,-

different thermal cycles so that temperature and
pressure are distributed evenly, ensuring the pro-
duction of components of the highest quality

Underseat cover right side in carbon fiber

Code: 80A0C2864

Produced in autoclave, a process that applies € 215,-

different thermal cycles so that temperature and
pressure are distributed evenly, ensuring the pro-
duction of components of the highest quality

60
www.mgh.co.at
BRUTALE Carbon

Undertank cover left side in carbon fiber

Code: 80A0C2459

Produced in autoclave, a process that applies € 255,-

different thermal cycles so that temperature and
pressure are distributed evenly, ensuring the pro-
duction of components of the highest quality

Undertank cover right side in carbon fiber

Code: 80A0C2460

Produced in autoclave, a process that applies € 255,-

different thermal cycles so that temperature and
pressure are distributed evenly, ensuring the pro-
duction of components of the highest quality

61
www.mgh.co.at
BRUTALE Protectors
Front axel protectors
Code: SPPRA001RV

Manufactured in ergal T6 7075 € 99,-

Personalized with Mv Agusta Corse logo
Black anodisation

Handlebar weight kit

Code: 8000C1326

Manufactured in ergal T6 7075 € 59,90

Personalized with MV Corse laser logo

Sprocket cover made from solid light alloy by

Code: SPCP153R
CNC machines, and subsequent surface anodi-
zing. It replaces the original plastic, giving a € 183,-
racing and precious look. No modifications are
required for assembly

Only for 2015-2016 models

62
www.mgh.co.at
BRUTALE Protectors
Side frame protectors
Code: 8000C1331

Personalized with Mv Agusta Corse logo € 205,-

It protects the bike in case of crash

ONLY FOR EURO 3 VERSION

63
www.mgh.co.at
BRUTALE Racing Accessories
Racing air filter
Code: RDMTO02911

Designed to increase power and acceleration € 135,-

Perfectly interchangeable with the original filter
without any changes to the airbox
High air flow with excellent filtration

Solid machined nuts in TITANIUM GR 5.

Code: SPDA385X

The kit consists of five nuts for fixing the cou- € 238,-
pling blocks housed in the transmission crown.
Each nut retains the dimensions of the originals
and are therefore perfectly interchangeable.

Lower steering plate made from solid light

Code: SPPSB06B
alloy with subsequent surface anodising.
€ 624,50
The geometry respects the angle of inclination of
the original plates.
The plate is supplied with lightened stainless
steel screws. Ø 54 mm

64
www.mgh.co.at
BRUTALE Racing Accessories
Rear wheel nut in ergal perfectly interchange-
Code: SPDA397R
able with the original as it maintains the same
size and shape of the original. € 138,-

CNC machined from billet, coloured surface red

anodized

Front wheel axle nut machined from solid

Code: SPDA395R
light alloy by machines, and subsequent colou-
red surface anodizing. € 35,50

Measurements M25x1.25
Hexagonal wrench 28 mm

Rear sprocket flange machined from billet

Code: SPFL502R
ergal with subsequent treatment of surface red
anodization and carbon inserts € 345,-

Lightness, design and reliability for a very visible

detail

65
www.mgh.co.at
BRUTALE Racing Accessories
Innovative right hand control integrated in
Code: SPSWM05B
the accelerator control
€ 484,-
The push-button panel body is machined from
7075 (Ergal) aluminium billet and then under-
goes a hard black anodizing process, which
enhances the work with numerically controlled
machines. The pushbuttons/switches used are
in compliance with military standard IP67, a
Red - ON/OFF switch standard that certifies the watertightness of the
push-button panel itself. The operation of each
Black - start button button is guaranteed for over 700,000 cycles.

Grey ON/OFF switch usable at will Plug&play assembly is very simple: just remove
the original push-button panel and the jumper of
the front brake pump with the necessary equip-
ment provided by Mv Agusta and assemble the
CNC Racing push-button panel by connecting
the plug to the original cable of the bike. There
is no need to intervene in any other way on the
bike and it is always possible to return to the
original configuration without any kind of modifi-
cation

66
www.mgh.co.at
BRUTALE Racing Accessories
Racing push button panel that integrates
Code: SPSWM04B
the functions of the left and right push
button panels € 546,-

The push-button panel body is machined from

7075 (Ergal) aluminium billet and then under-
goes a hard black anodizing process, which
enhances the work with numerically controlled
machines. The pushbuttons/switches used are
Red - Start ON/OFF switch in compliance with military standard IP67, a
standard that certifies the watertightness of the
Grey - ON/OFF switch can be used at will push-button panel itself. The operation of each
button is guaranteed for over 700,000 cycles
Black - MODE
Plug&play assembly is very simple: just remove
Yellow - Set the original push button panel and the jumper of
the front brake pump with the necessary equip-
Green -Start button ment provided by Mv Agusta and assemble the
CNC Racing push button panel by connecting
the plug to the original cable of the bike. There
is no need to intervene in any other way on the
bike and it is always possible to return to the
original configuration without any kind of modifi-
cation

67
www.mgh.co.at
BRUTALE Racing Accessories
Right hand control for Brembo CNC radial
Code: SPSWM03B
and forged brake master cylinders
€ 376,-
The push-button panel body is machined from
7075 (Ergal) aluminium billet and then under-
goes a hard black anodizing process, which
enhances the work with numerically controlled
machines. The pushbuttons/switches used are
in compliance with military standard IP67, a
Red - ON/OFF switch standard that certifies the watertightness of the
push-button panel itself. The operation of each
Black - Start button pushbutton is guaranteed for over 700,000 cyc-
les
Grey - ON/OFF switch can be used at will
Plug&play assembly is very simple: just remove
the original push button panel and the jumper of
the front brake pump with the necessary equip-
ment provided by Mv Agusta and assemble the
CNC Racing push button panel by connecting
the plug to the original cable of the bike. There
is no need to intervene in any other way on the
bike and it is always possible to return to the
original configuration without any kind of modifi-
cation

68
www.mgh.co.at
BRUTALE Racing Accessories

Ducts cooling system braking GP Ducts de-

Code: SPZA701Y (Matte carbon)
veloped in collaboration with the best Moto GP
SPZA701K (Glossy carbon)
and Superbike teams.
€ 432,-
The kit is made by hand in 100% autoclave car-
bon fiber, and consists of two pieces
NEEDS ASSEMBLY KIT CODE SPZAB09B

Mounting kit for front brake cooling ducts

Code: SPZAB09B

€ 74,50

69
www.mgh.co.at
BRUTALE Racing Accessories

Rear brake oil tank 20 ml with level portho-

Code: SPSEB20R
le machined from solid by cnc machines with
subsequent surface anodization which ensures € 258,-
quality and durability

THE CAP IS NOT INCLUDED

Front brake fluid reservoir cap made from

Code: SPTF451B
light alloy solid with surface anodising
€ 62,-
The kit includes all the screws for the application.
Assembly is simple and does not require any
modification

70
www.mgh.co.at
BRUTALE Racing Accessories
Front brake oil tank machined from billet by
Code: SPSE501R
CNC machines with subsequent red surface an-
odization that guarantees quality and durability € 173,-

The kit includes three outputs (vertical, 45° and

90° inclination), two metal brackets and comple-
te gaskets

COMPATIBLE WITH: 1078 RR MY07-11 / 1090

CORSA MY13-16 / 1090 R MY12-15 / 1090 RR
MY10-17 / 1090 MY13-17 / 750 S MY03-08 / 910
R MY05-11 / 910 S MY03-11 / 920 MY11-12 /
989 R MY05-08 / 990 R MY09-12

Clutch oil tank machined from billet by CNC

Code: SPSE501R
machines with subsequent red surface anodiza-
tion that guarantees quality and durability € 173,-

The kit includes three outputs (vertical, 45° and

90° inclination), two metal brackets and comple-
te gaskets

COMPATIBLE WITH: 1078 RR MY07-11 / 1090

Corsa MY13-16 / 1090 R MY12-15 / 1090 RR
MY10-17 / 1090 MY13-17 / 750 S MY03-08 / 910
R MY05-11 / 910 S MY03-11 / 920 MY11 - 12 /
989 R MY05-08 / 990 R MY09-12
71
www.mgh.co.at
BRUTALE Mirrors / Plateholders
Right ergal mirrors T6 7075
Code: 8000C1308

Completely CNC machined € 175,-

Personalized with MV Corse logo
Allows excellent visibility and multiple adjust-
ments

Left ergal mirrors T6 7075

Code: 8000C1309

Completely CNC machined € 175,-

Personalized with MV Corse logo
Allows excellent visibility and multiple adjust-
ments

Lower license plate holder kit

Code: SPPTT001RD

Anodized in black € 415,-

With MV Agusta Corse logo

72
www.mgh.co.at
 Exhaust

Accessories

Carbon

Racing Accessories

Dragster
DRAGSTER Exhaust
3 way MV Agusta exhaust
Code: 8000C2458
Stainless steel with black anodisation
MV Agusta logo lasered € 1.795,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION

3 way MV Agusta exhaust

Code: 8000C6850
Stainless steel with ceramic total black treatment
MV Agusta logo lasered € 1.926,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION

3 way MV Agusta exhaust

Code: 8000C6851
Ultra violet full titanium
MV Agusta logo lasered € 1.926,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION 74
www.mgh.co.at
DRAGSTER Exhaust

3 way MV Agusta exhaust

Code: 8000C6852
Ultra violet full titanium
MV Agusta logo lasered € 2.590,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION

3 way MV Agusta exhaust

Code: 8000C6591
Stainless steel with black anodisation
MV Agusta logo lasered € 1.793,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION

75
www.mgh.co.at
DRAGSTER Accessories
HDPE (High Intensity Polyethylene) contai-
Code: SPOP350B
ner resistant to solvents and paints
€ 24,50
Essential for changing oil in the workshop or in
your own garage
Equipped with a discharge system with an-
ti-splash edge to prevent spillage during trans-
port or transfer
Dimensions: H90mm Ø330mm

Rear stand made in boxed steel

Code: 8000C3396

Powder coated € 528,-

Customized with MV Corse Logo on the side
It grants an optimum stability during
maintenance

Rear stand with silicone wheels

Code: 8000C1286
powder coated stainless steel
personalised with metal MV Agusta Corse Equip- € 348,-
ped with interchangeable nylon pin mounted on
bearings
Designed to support the weight of the bike and
the rider in competitions
Thanks to the high quality construction, this
stand maintains its technical and design qualities
for a long time 76
www.mgh.co.at
DRAGSTER Accessories
Mv Agusta personalized bike carpet
Code: SPBIKEMAT

100% absorbent fiber, no problem with oil or Preis auf Anfrage

gasoline, washable, UV-resistant, shock-resistant
and non-slip rubber back surface

sizes 80x250 cm

77
www.mgh.co.at
DRAGSTER Carbon

Lower chain guard in carbon fiber

Code: RDTL050018

Manufactured using the vacuum process, with € 226,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Upper chain guard in carbon fiber

Code: RDTL060018

Manufactured using the vacuum process, with € 289,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

78
www.mgh.co.at
DRAGSTER Carbon

Undertank cover left side in carbon fiber

Code: 80A0C2459

Produced in autoclave, a process that applies € 255,-

different thermal cycles so that temperature and
pressure are distributed evenly, ensuring the pro-
duction of components of the highest quality

Undertank cover right side in carbon fiber

Code: 80A0C2460

Produced in autoclave, a process that applies € 255

different thermal cycles so that temperature and
pressure are distributed evenly, ensuring the pro-
duction of components of the highest quality

79
www.mgh.co.at
DRAGSTER Carbon

Radiator cover in carbon fiber right side

Code: 80A0C2470

Manufactured using the vacuum process, with € 410,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Radiator cover in carbon fiber left side

Code: 80A0C2471

Manufactured using the vacuum process, with € 410,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

80
www.mgh.co.at
DRAGSTER Carbon

Fuel tank panel in carbon fiber, left side

Code: 80A0C2463

Manufactured using the vacuum process, with € 478,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Fuel tank panel in carbon fiber, right side

Code: 80A0C2464

Manufactured using the vacuum process, with € 478,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

81
www.mgh.co.at
DRAGSTER Carbon

Left air intake in carbon fiber

Code: 80A0C2461

Manufactured using the vacuum process, with € 610,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Right air intake in carbon fiber

Code: 80A0C2464

Manufactured using the vacuum process, with € 610,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

82
www.mgh.co.at
DRAGSTER Carbon

Radiator cover in carbon fiber right side

Code: 80A0C2468

Manufactured using the vacuum process, with € 638,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Radiator cover in carbon fiber left side

Code: 80A0C2469

Manufactured using the vacuum process, with € 638,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

83
www.mgh.co.at
DRAGSTER Carbon
Rear carbon mudguard
Code: RDTL092018

Manufactured using the vacuum process, with € 375,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Front carbon mudguard

Code: RDTL090018

Manufactured using the vacuum process, with € 429,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Swingarm carbon cover

Code: RDTL095018

It protects swingarm in case of crash € 355,-

Manufactured using the vacuum process, with
high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

84
www.mgh.co.at
DRAGSTER Carbon

Right front mudguard support in carbon

Code: RDTL097018A
fiber
€ 230,-
Manufactured using the vacuum process, with
high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Left front mudguard support in carbon

Code: RDTL097018B
fiber
€ 230,-
Manufactured using the vacuum process, with
high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

85
www.mgh.co.at
DRAGSTER Carbon

Right end lever protection in carbon fiber

Code: RDTL101018A

Manufactured using the vacuum process, with € 95,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Left end lever protection in carbon fiber

Code: RDTL101018B

Manufactured using the vacuum process, with € 95,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

86
www.mgh.co.at
DRAGSTER Carbon

Left side manifolds protection in carbon

Code: RDTL103018B
fiber
€ 295,-
Manufactured using the vacuum process, with
high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Right side manifolds protection in carbon

Code: RDTL103018A
fiber
€ 295,-
Manufactured using the vacuum process, with
high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

87
www.mgh.co.at
DRAGSTER Carbon
Voltage regulator cover in carbon fiber
Code:80A0C2865

Produced in autoclave, a process that applies € 278,-

different thermal cycles so that temperature and
pressure are distributed evenly, ensuring the pro-
duction of components of the highest quality

Brutale 800 RC

88
www.mgh.co.at
DRAGSTER Racing Accessories
Ducts cooling system braking GP Ducts
Code: SPZA701Y (Matte carbon)
developed in collaboration with the best Moto
SPZA701K (Glossy carbon)
GP and Superbike teams.
The kit is made by hand in 100% autoclave car- € 432,-
bon fiber, and consists of two pieces

ATTENTION: FOR THE INSTALLING IT IS NE-

CESSARY TO BUY ALSO THE ASSEMBLY KIT
CODE SPZAB09B

Innovative right hand control integrated assemble the CNC Racing push-button panel
in the accelerator control by connecting the plug to the original cable of
the bike. There is no need to intervene in any
The push-button panel body is machined from other way on the bike and it is always possible
7075 (Ergal) aluminium billet and then under- to return to the original configuration without
goes a hard black anodizing process, which any kind of modification.
enhances the work with numerically controlled
machines. The pushbuttons/switches used are Code: SPSWM05B
in compliance with military standard IP67, a € 484,-
Red - ON/OFF switch standard that certifies the watertightness of
the push-button panel itself. The operation of
Black - start button each button is guaranteed for over 700,000
cycles.
Grey ON/OFF switch usable at will
Plug&play assembly is very simple: just remo-
ve the original push-button panel and the jum-
per of the front brake pump with the neces-
sary equipment provided by Mv Agusta and 89
www.mgh.co.at
DRAGSTER Racing Accessories
Racing push button panel that integrates
Code: SPSWM04B
the functions of the left and right push
button panels € 546,-

The push-button panel body is machined from

7075 (Ergal) aluminium billet and then under-
goes a hard black anodizing process, which
enhances the work with numerically controlled
machines. The pushbuttons/switches used are
Red - Start ON/OFF switch in compliance with military standard IP67, a
standard that certifies the watertightness of the
Grey - ON/OFF switch can be used at will push-button panel itself. The operation of each
button is guaranteed for over 700,000 cycles
Black - MODE
Plug&play assembly is very simple: just remove
Yellow - Set the original push button panel and the jumper of
the front brake pump with the necessary equip-
Green -Start button ment provided by Mv Agusta and assemble the
CNC Racing push button panel by connecting
the plug to the original cable of the bike. There
is no need to intervene in any other way on the
bike and it is always possible to return to the
original configuration without any kind of modifi-
cation

90
www.mgh.co.at
DRAGSTER Racing Accessories
Right hand control for Brembo CNC radial
Code: SPSWM03B
and forged brake master cylinders
€ 376,-
The push-button panel body is machined from
7075 (Ergal) aluminium billet and then under-
goes a hard black anodizing process, which
enhances the work with numerically controlled
machines. The pushbuttons/switches used are
in compliance with military standard IP67, a
Red - ON/OFF switch standard that certifies the watertightness of the
push-button panel itself. The operation of each
Black - Start button pushbutton is guaranteed for over 700,000 cyc-
les
Grey - ON/OFF switch can be used at will
Plug&play assembly is very simple: just remove
the original push button panel and the jumper of
the front brake pump with the necessary equip-
ment provided by Mv Agusta and assemble the
CNC Racing push button panel by connecting
the plug to the original cable of the bike. There
is no need to intervene in any other way on the
bike and it is always possible to return to the
original configuration without any kind of modifi-
cation

91
www.mgh.co.at
DRAGSTER Racing Accessories
The push-button panel body is machined from
Code: SPSWM01B
7075 (Ergal) aluminium billet and then under-
goes a hard black anodizing process, which € 567,-
enhances the work with numerically controlled
machines. The pushbuttons/switches used are
in compliance with military standard IP67, a
standard that certifies the watertightness of the
push-button panel itself. The operation of each
pushbutton is guaranteed for over 700,000 cyc-
FRONT BUTTONS les

Blue - High beam Plug&play assembly is very simple: just remove

the original push button panel and the jumper of
Grey - Right Arrow the front brake pump with the necessary equip-
ment provided by Mv Agusta and assemble the
Green - OK CNC Racing push button panel by connecting
the plug to the original cable of the bike. There
Black - Left Arrow is no need to intervene in any other way on the
bike and it is always possible to return to the
Yellow - Horn original configuration without any kind of modifi-
cation
REAR BUTTON

Red - Set

92
www.mgh.co.at
DRAGSTER Racing Accessories
Right hand control for Brembo CNC radial
Code: SPSWM02B
and forged brake master cylinders
€ 376,-
The push-button panel body is machined from
7075 (Ergal) aluminium billet and then under-
goes a hard black anodizing process, which
enhances the work with numerically controlled
machines. The pushbuttons/switches used are
in compliance with military standard IP67, a
Red - ON/OFF switch standard that certifies the watertightness of the
push-button panel itself. The operation of each
Black - Start button pushbutton is guaranteed for over 700,000 cyc-
les
Grey - ON/OFF switch can be used at will
Plug&play assembly is very simple: just remove
the original push button panel and the jumper of
the front brake pump with the necessary equip-
ment provided by Mv Agusta and assemble the
CNC Racing push button panel by connecting
the plug to the original cable of the bike. There
is no need to intervene in any other way on the
bike and it is always possible to return to the
original configuration without any kind of modifi-
cation

93
www.mgh.co.at
DRAGSTER Racing Accessories
Rear brake oil tank 20 ml with level porthole
Code: SPSEB20R
machined from solid by CNC machines with sub-
sequent red surface anodization which ensures € 258,-
quality and durability

THE CAP IS NOT INCLUDED

Rear brake fluid reservoir cap made from

Code: SPTF451B
light alloy solid with red surface anodising
€ 62,-
The kit includes all the screws for the application
Assembly is simple and does not require any
modification

Rear wheel nut in ergal perfectly interchange-

Code: SPDA397R
able with the original as it maintains the same
size and shape of the original. €137,50

CNC machined from billet, coloured surface red

anodized

94
www.mgh.co.at
 Exhaust

Levers

Footpegs

Plateholders

Caps

Accessories

Seats

Carbon

Protectors

Racing Accessories

Mirrors

Turismo Veloce Bags

TURIMSO VELOCE Exhaust
3 way MV Agusta exhaust
Code: 8000C2458
Stainless steel with black anodisation
MV Agusta logo lasered € 1.793,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION

3 way MV Agusta exhaust

Code: 8B00C6850
Stainless steel and carbon
Metallic pin MV Agusta logo € 1.678,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION

3 way MV Agusta exhaust

Code: 8B00C6851
Stainless steel with ceramic total black treatment
MV Agusta logo lasered € 1.678,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION 96
www.mgh.co.at
TURISMO VELOCE Exhaust
3 way MV Agusta exhaust
Code: 8B00C6852
Ultra violet full titanium
MV Agusta logo lasered € 2590,-
Removable Db Killers
No additional ECU required, can be installed
without any modification

STREET LEGAL EU HOMOLOGATION

COMPATIBLE ONLY WITH EURO 4 VERSION

97
www.mgh.co.at
TURISMO VELOCE Levers

Articulated clutch lever

Code: 8000C1322

Manufactured in CNC aluminum € 205,-

Personalized with Mv Agusta Corse logo
Black anodisation

Articulated front brake lever

Code: 8000C1313

Manufactured in CNC aluminum € 205,-

Personalized with Mv Agusta Corse logo
Black anodisation

98
www.mgh.co.at
TURISMO VELOCE Footpegs / Plateholders

Footrest kit
Code: 8000C1304

Manufactured in ergal T6 7075 € 125,-

Designed to improve grip
Perfectly compatible with the original footrests
Personalized with Mv Agusta Corse logo

Lower license plate holder kit

Code: SPPTT001RD

anodized in black € 415,-

With MV Agusta Corse logo

99
www.mgh.co.at
TURISMO VELOCE Caps

Engine oil cap

Code: 8000C1638

Manufactured in ergal € 56,-

Personalized with Mv Agusta logo

Racing fuel tank cap

Code: 8000C1694

Manufactured in ergal € 143,-

Personalized with Mv Agusta logo

100
www.mgh.co.at
TURISMO VELOCE Caps

Brake pump ergal cap

Code: 8000C1696

Manufactured in ergal T6 7075 € 96,-

Personalized with laser serigraphy with Mv Agus-
ta

Clutch pump ergal cap

Code: 8000C1697

Manufactured in ergal T6 7075 € 96,-

Personalized with laser serigraphy with Mv Agus-
ta

101
www.mgh.co.at
TURISMO VELOCE Accessories
Central stand kit
Code: 8000C1969

€ 125,-

Heated grips kit

Code: 8000C1967

3 different adjustment € 279,-

Supplied with dedicated ECU for installation

Red/grey bike cover for indoor

Code: 8000C2429

Made in stretch material, it completely covers € 155,-

the motorcycle, protecting it from dust and dirt
Customized with a logo on the side and the mo-
del logo in the passenger zone

102
www.mgh.co.at
TURISMO VELOCE Accessories
Rear stand with silicone wheels Thanks to the high quality construction, this
stand maintains its technical and design quali-
powder coated stainless steel ties for a long time
personalised with metal MV Agusta Corse
Equipped with interchangeable nylon pin
Code: 8000C1286
mounted on bearings
Designed to support the weight of the bike
€ 348,-
and the rider in competitions

Rear stand made in boxed steel

Code: 8000C3396

Powder coated € 528,-

Customized with MV Corse Logo on the side
It grants an optimum stability during
maintenance

Standard front stand with silicone wheel stand maintains its technical and design quali-
ties for a long time
Powder coated stainless steel and personal-
ised with metal MV Agusta Corse tag
Designed to support the weight of the bike Code: SPCAI001BF
and the rider in intense and demanding situa-
tions such as competitions
€ 178,-
Thanks to the high quality construction, this
103
www.mgh.co.at
TURISMO VELOCE Accessories
HDPE (High Intensity Polyethylene) contai-
Code: SPOP350B
ner resistant to solvents and paints
€ 24,50
Essential for changing oil in the workshop or in
your own garage
Equipped with a discharge system with an-
ti-splash edge to prevent spillage during trans-
port or transfer
Dimensions: H90mm Ø330mm

Mv Agusta personalized bike carpet

Code: SPBIKEMAT

100% absorbent fiber, no problem with oil or Preis auf Anfrage

gasoline, washable, UV-resistant, shock-resistant
and non-slip rubber back surface

sizes 80x250 cm

Black resin fuel tank sticker

Code: SPADTVRES

UVA resistant Preis auf Anfrage

Original design
Personalized with MV Corse logo
Dimensions 84,1 x 159,2

104
www.mgh.co.at
TURISMO VELOCE Seats
Low ride non-slip seat -2cm
Code: 8000C2909

Neoprene coated with red waterproof seams and € 212,-

black leather sides
With a more ergonomic profile than the standard
seat, it grants more comfort thanks to the gel
padding, and a better grip due to the non-slip
fabric for a more precise and comfortable ride

Non-slip comfort rider seat

Code: 8000C2910

Neoprene coated with red waterproof seams and € 212,-

black leather sides
With a more ergonomic profile than the standard
seat, it grants more comfort thanks to the gel
padding, and a better grip due to the non-slip
fabric for a more precise and comfortable ride

Non-slip comfort passenger seat

Code: 8000C2478

Neoprene coated with red waterproof seams and € 212,-

black leather sides
With a more ergonomic profile than the standard
seat, it grants more comfort thanks to the gel
padding, and a better grip due to the non-slip
fabric for a more precise and comfortable ride
105
www.mgh.co.at
TURISMO VELOCE Carbon

Front carbon mudguard

Code: RDTL091018

Manufactured using the vacuum process, with € 519,50

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Rear carbon licence plate holder in carbon

Code: RDTL193019
fiber
€ 505,-
Manufactured using the vacuum process, with
high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

106
www.mgh.co.at
TURISMO VELOCE Carbon
Carbon exhaust cover
Code: 8000C1909

Produced in autoclave, a process that applies € 375,-

different thermal cycles so that temperature and
pressure are distributed evenly, ensuring the pro-
duction of components of the highest quality

Sprocket cover in carbon fiber

Code: RDTL073018

Manufactured using the vacuum process, with € 155,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

Upper chain guard in carbon fiber

Code: RDTL060018

Manufactured using the vacuum process, with € 289,-

high mechanical performance, high breaking
loads and an aesthetic effect that is difficult to
achieve with manual lamination

107
www.mgh.co.at
TURISMO VELOCE Protectors
Front axel protectors (left and right)
Code: SPPRA001RV

Manufactured in ergal T6 7075 € 99,-

Personalized with Mv Agusta Corse logo
Black anodisation

Clutch cover
Code: SPPCA001RV

Manufactured in ergal T6 7075 € 255,-

Personalized with Mv Agusta logo
Protects the engine in case of fall

Engine protection
Code: 8000C1328

Manufactured in ergal T6 7075 Preis auf Anfrage

Personalised with MV Agusta Corse logo

108
www.mgh.co.at
TURISMO VELOCE Protectors

Rear wheel protectors

Code: SPTP428R

Made from solid plastic and light alloy € 131,-

Protects the swingarm from accidental falls or
slips
Gives the bike a sportier design

Front wheel protection

Code: SPTP427R

Made from solid plastic and light alloy € 96,-

Protects the fork from accidental falls or slips
Gives the bike a more sporty design

109
www.mgh.co.at
TURISMO VELOCE Racing Accessories
Racing air filter
Code: RDMT002911

Designed to increase power and acceleration € 169,-

Perfectly interchangeable with the original filter
without any changes to the airbox
High air flow with excellent filtration

Solid machined nuts in TITANIUM GR 5. Code: SPDA385X

The kit consists of 5 nuts for fixing the rear

€ 238,-
sprocket
Each nut maintains the dimensions of the
originals and are therefore perfectly interchan-
geable

Rear sprocket flange machined from bil-

Code: SPFL502R
let ergal with subsequent treatment of sur-
face red anodization and carbon inserts € 345,-
Lightness, design and reliability for a very visible
detail

110
www.mgh.co.at
TURISMO VELOCE Racing Accessories

Front wheel axle nut machined from solid

Code: SPDA395R
light alloy by machines, and subsequent colou-
red surface anodizing € 35,50

Measurements M25x1.25
Hexagonal wrench 28 mm

Rear wheel nut in ergal perfectly interchange-

Code: SPDA397R
able with the original as it maintains the same
size and shape of the original. € 138,-

CNC machined from billet, coloured surface red

anodized

111
www.mgh.co.at
TURISMO VELOCE Racing Accessories

Rear brake oil tank 20 ml with level porthole

Code: SPSEB20R
machined from solid by CNC machines with sub-
sequent red surface anodization which ensures € 258,-
quality and durability

THE CAP IS NOT INCLUDED

Rear brake fluid reservoir cap made from

Code: SPTF451B
light alloy solid with red surface anodising
€ 62,-
The kit includes all the screws for the application
Assembly is simple and does not require any
modification

112
www.mgh.co.at
TURISMO VELOCE Mirrors / Bags
Right ergal mirrors T6 7075
Code: 8000C1308

Completely CNC machined € 175,-

Personalized with MV Corse logo
Allows excellent visibility and multiple adjust-
ments

Left ergal mirrors T6 7075

Code: 8000C1309

Completely CNC machined € 175,-

Personalized with MV Corse logo
Allows excellent visibility and multiple adjust-
ments

Side bags kit

Code: 8000C5608

Supplied with: € 1.100,-

Support brackets
Bag connection
Assembly instructions

113
www.mgh.co.at