8 7 6 5 4 3 DRAWING NO.

0523687 1
REV
1
REVISIONS
REV DESCRIPTION REV. BY DATE CHECKED APPROVED

A PRODUCTION RELEASE PTSINGH 1/22/2021 FEBOLI AMARIUCI

D D

C C

B B

3 UNLESS OTHERWISE SPECIFIED

GENERAL NOTES:

1-BREAK SHARP CORNERS AND BURRS

2-RADIUS WITHOUT DIMENSIONS 0,5

3-CHAMFER WITHOUT DIMENSIONS 0,5 X 45°
TOLERANCE WHERE NOT SPECIFIED SURFACE TEXTURE

X + 0,8 COARSER 25
-

X,X +
-
0,4 MILLING 12,5
X,XX +
NOTES: -
0,2 GRINDING 3,2
TURNED GROUND
ANGLES + 1° 1,6
- AND POLISHED

1. REMOVE FIRST START THREAD TO GET A 100% TO PROFILE.

MATERIAL: UNLESS OTHERWISE SPECIFIED PROPRIETARY INFORMATION OCEANEERING
A 2. INCONEL 625 CLADDING AREA. TOLERANCES ALL DIMENSIONS ARE IN INCHES THIS DOCUMENT CONTAINS INFORMATION
INTERNATIONAL, INC. A
FRACTIONS: ± 1/16 DIMENSIONS IN [ ] ARE IN MM. WHICH IS PROPRIETARY TO OCEANEERING
3. WEB TOLERANCE TABLE TO BE FOLLOWED FOR MACHINE TOLERANCES. AISI 8630 80K
DECIMALS: .x ± .03 INTERPRET DRAWING PER ASME INTERNATIONAL INC.THE INFORMATION
CONTAINED HEREIN SHALL NOT BE DISCLOSED,
WWW.OCEANEERING.COM

Y14.100-2004 ADAPTER 3 IN WECO 1502 FEMALE X 1/2 IN NPT

AUTOCAD - MACH. PART

.xx ± .015

4. ALL DIMENSIONS ARE IN MM. ANGLES:

.xxx ± .005
± 0°-30'
INTERPRET DIMENSIONS & TOLERANCES
PER ASME Y14.5-2009
DUPLICATED, OR USED IN WHOLE OR IN PART
FOR ANY PURPOSE OTHER THAN TO EVALUATE
THIS DOCUMENT WITHOUT WRITTEN CONSENT
DPR 5K
BREAK ALL SHARP EDGES R.015 MAX
5. AFTER MACHINING APPLY HOT MANGANESE PHOSPHATE. COATING: CONCENTRICITY: .005
REMOVE ALL BURRS
OF OCEANEERING INTERNATIONAL, INC. PRE WELDING AND WELD OVERLAY DRAWING
SURFACE FINISH: 125
UNSPECIFIED FILLETS & RADII TO BE DRAWN: DATE: WEB 62987
6. REFERENCE OCEANEERING DOCUMENT D-0775684 FOR AS-BUILT VERSION OF WEB DRAWING 62987 SEE NOTES THIRD ANGLE PROJECTION R.015/.030
ALL TAPPED HOLES PER ASME B1.1
PTSINGH
CHKD:
FEBOLI
DATE:
1/21/2021
1/21/2021
SIZE CODE PART NO. REV
SEE SEPARATE EBOM IN PLM SYSTEM
REVISION 0. ALL DIMENSIONS APPLY AFTER PLATING
OR COATING
APPVD:
AMARIUCI
DATE:
1/21/2021. D
SCALE
0
WEIGHT
0523687 SHEET A
DO NOT SCALE DRAWING eSIGNATURES ON FILE NTS 8.0 KG 1 OF 1
FORM F-0251166, REV A
8
Reference copy unless banner states Released 7 6 5 4 3 2 1
Released: 03 Mar 2021