Tips To Understand Revit Railings: 1-Choose Between Sketch A Path or Place On Host
Tips To Understand Revit Railings: 1-Choose Between Sketch A Path or Place On Host
Tips To Understand Revit Railings: 1-Choose Between Sketch A Path or Place On Host
Railings is probably the hardest tool to master in Revit. The menus and multiple sub-types of
elements can be confusing. Don't worry, we got you covered. Read these tips to become a
Railings warrior.
SKETCH ON PATH
This option allows you to draw a railing outline any way you wish to. Draw a continuous purple
line, then click the green check.
PLACE ON HOST
Choose this option to automatically create the railing based on an existing stair or ramp. Choose
placement on treads or stringer.
2- ADJUST "OFFSET FROM PATH"
When adding a railing to stair Treads, the path offset will be set to 25. When adding a railing to
Stringer, the path offset will be set half the value of the stringer width. So -25mm for a 50mm
stringer. You can change these values at all time by selecting the railing and checking properties.
The Railing Type contains everything inside a railing. In each type, you get to select Top Rail,
Handrail, Rails and Balusters.
Here is a visual guide to all the parts contained in these types.
RAIL ELEMENTS
TOP RAIL
Top rail is the highest horizontal element of a railing. It is created by selecting a 2D profile and a
height.
HANDRAIL
Handrail is an intermediate rail used for hands. They are linked to a wall or to a railing with
Supports.
INTERMEDIATE RAIL
Any horizontal rail other than the Top Rail and the Handrail. Can be used to constraints
balusters.
RAIL 2D PROFILE
Every Rail in Revit is an extrusion from a 2D Profile Family. Use default profiles for simple shapes,
or create a custom one for fancy shapes.
EXTENSION
Use extension to add length to Top Rail or Handrail. The extension shape can be customized.
SUPPORT
The elements that connect the Handrail to the wall or to the railing.
BALUSTER ELEMENTS
BALUSTERS
Vertical elements that are part of the railing. Set their shape with Baluster Family. Adjust their
spacing in Baluster Placement.
POSTS
Posts are balusters that are at the Start, the End or the Corner of a railing. They can be added in
Baluster Placement.
BALUSTER FAMILY
Balusters are made from a full 3D Revit family. Unless you want something fancy, you can use
the default families.
SELECT PROFILE
Select a 2D profile family. It will be extruded to create your Rail. Use one of Revit default profiles:
Round, Elliptical, Square or Rectangular. If you want a more complex shape, you will need a
custom profile.
SET EXTENSIONS
Use extension if you want your rail to go beyond the railing limit. Choose between Floor, Post
and Wall extension. You can set an extension at the Beginning and End of the railing.
Supports are used to connect Handrails to railings or to walls. Adjust Family type, Layout,
Spacing and Justification in Handrail type.
The default Revit family is Circular. In the Support Type properties, you
can adjust Radius and Height. If you want a different shape, you will need
to create another Support family.
SET RAILS HEIGHT
The height of Top Rail is set in Railing Type. To change Handrail height, go to Handrail type.
Also adjust Hand Clearance, which is the distance between baluster end and the center of the
handrail.
In the Railing Type, click on Rail Structure (Non-Continuous). Then, click on the Insert button to
add a new rail. Give a name to your rail.
Profile for intermediate rails work the same way as profiles for Handrail and Top Rail. Select one
of Revit default profile family, or create a custom one for more complexity.
Then, set the rail height and the offset distance to the center of the railing. The rail height can
never be higher than the Top Rail. Add a material if you wish to. You are done! Use duplicate to
create many intermediate rails.
9- LEARN HOW TO CREATE A BALUSTER PATTERN
GO TO BALUSTER PLACEMENT
In the Railing Type properties, you will find Baluster Placement. In this tab, you select how to
configure the balusters. You might be intimidated by the dialog box that appears. No worry, we
will make it simple.
In the Baluster Family column, pick a Baluster to use. By default, Revit contains Round, Square,
Rectangular shapes. If you want a fancier shape, you will have to make a custom family.
Use offset to set a distance between balusters and the purple center line of the railing.
Select the base and the top of your balusters. Can be either the Host or Rails elements. Then
adjust the required offset from these elements.
In the image below, the red dashed line indicate the position of the balusters. You can see that
the baluster Base is 100mm from the Host and baluster Top is set to the Top Rail.
SET DISTANCE FROM PREVIOUS
Set Justify option to decide how balusters spacing will adjust to railing length. Beginning, End
and Center will keep Distance from Previous, while Spread Pattern to Fit will change the value to
have an equal spacing.
SELECT POSTS
Posts are special balusters that only appear at the Start and End of a railing. Corner posts are
optional. They are used for railing intersection.
10- SHOW PREVIEW IN RAILING TYPE
Not sure how your railing is going to turn out? Use preview in Railing Type properties to get a
glimpse of what it will look like. You can select 3D views, plan view or elevations.
All the others families are directly under the Railings category, including Balusters and Supports.
Don’t forget that all rails use a 2D Profile that can be found under the Profiles menu in Families.
To save time, use CTRL-F in the project browser and type the name of the component you are
looking for.
See the pin icon ? Clicking it will break the link between the Railing Type and the specific railing
element. That means you can change the Top Rail for a specific instance without affecting other
railings using this type.