HS611

Contents

Product Overview ...................................................... 2

Tablet Introduction .................................................... 2
Product and Accessories ................................................ 2
Product Connection .................................................... 4
Driver and Setting ..................................................... 6
Install Driver ........................................................ 6
Driver Interface Preview ................................................. 8
Pen Tablet Setting ..................................................... 9
Digital Pen Setting .................................................... 16
Driver Setting ....................................................... 22
Digital Pen Basic Operation .............................................. 26
Specifications ........................................................ 30
Troubleshooting Solutions .............................................. 31

1 / 32
 HS611

Product Overview
Tablet Introduction

Thanks for choosing HUION INSPIROY HS611 creative pen tablet. This is a new generation of
professional battery-free drawing tablet, which can greatly improve your work efficiency of
painting and creation, and full of fun. You can freely painting and writing, depicting different
lines and colors, just as the pen writes on the paper, which brings you a real shock experience.
To give you a better understanding and using of your tablet, please read this user manual
carefully. The user manual only shows the information under Windows, unless otherwise
specified, this information applies to both Windows and Mac systems.

Note: The pictures in the User Manual are for reference only.
Product and Accessories

Please see the detailed product introduction.

2 / 32
 HS611

After unboxing your package, make sure that you have the following items:

Tablet*1
Battery-free Pen*1
Pen Holder*1
Replacement Nibs(Inside the Pen Holder)*8
USB Cable*1

3 / 32
 HS611
Quick Start Guide*1
Warranty Card*1

Product Connection

The tablet supports the connection of a computer and a mobile phone, please refer to the
following steps to connect.

Connecting to Computer
Connect the tablet to your computer with USB cable. Please follow the steps below:

1. Take out the USB cable from the package, then connect tablet to your computer.
2. Open the driver interface, the device picture will be displayed on the interface, indicating
that the tablet is successfully connected to the computer.You can start use the tablet.
3. Restart the computer after the driver is installed.

4 / 32
 HS611
See Section

Connecting to Android Phone

Please follow the steps below:

1. Please make sure your phone & pad OS is as following: Android OS 6.0 or later.
2. For some models, you need to go phone or pad "Settings" then enable "OTG" function.
3. Choose the right OTG Adapter from package, which depends on USB port type of your
phone, then connect pen tablet to your phone following the illustrations below:

5 / 32
 HS611

Notes:
1. The pen tablet can work without installing any driver into your phone.
2. Once connected, the tablet will automatically enter phone mode, in which the pen can only
work in the left gray area.
3. Please note that the press keys of pen tablet and digital pen are not supported in phone
mode, unless you are using Huion Sketch.
* Huion Sketch is an intuitive drawing app developed by Huion.

Driver and Setting

Install Driver

Please download the driver from our website: Driver-HS611

Note:
1. Before installing driver, please close all graphic software and antivirus program.
2. If you have installed other pen tablet driver, please uninstall it before you install this driver.
3. Please make sure your computer OS are as following: Windows 7 or later, macOS 10.12 or
later.
4. Run the tablet driver program and complete the installation according to the instruction.

After the download is successful, double-click to open the driver, Connect the device to your
computer.

If the connection fails, please reconnect the computer to the device, or restart the driver or
computer.

6 / 32
 HS611

7 / 32
 HS611

Driver Interface Preview

1. Pen Tablet
Pen Tablet function setting interface, the users can set the tablet function on this interface,
such as Press Key, Working Area.

See Section

2. Digital Pen
The users can set the Pen function on this interface. About Press Key, Mode selection,
Pressure Sensitivity Adjustment and Pressure Test.

See Section

3. Store
Huion Store, where you can get the latest information about the product such as its FAQ or

8 / 32
 HS611
sales promotion. Additionally, you can also purchase other products or accessories on Huion
Store.

4. Add Programs
You can customize different functions on the current device for different programs.
When select All programs, the setting of the device is valid for every program.
By clicking Add a Program from the drop-down list, you can set the functions for a specific
program and hence have unique settings for different programs. After that, when launching a
specific program, the Driver will automatically recognize it and the setting features will change
to its corresponding one.

5. Setting
The users can set the Driver function on this interface. About Device Information, Backup
Setting, General Setting and Driver Update.

See Section

6. Switch between Devices

Driver can support the connection to two digital drawing devices at the same time. When
these devices are sharing the same Driver with the current device, users can customize the
settings of the devices by switching the Driver interface to the corresponding one.
Pen Tablet Setting

Press Key

You can customize the functions of these buttons according to your own habits, and you can

uncheck "Enable press keys" in the lower left corner to turn off the button function.

Place the cursor on a key to check its default value. Click the key for a pop-up dialog box and

then set the function.

You can enter a name for the keystroke, then select the property of the keystroke and

customize the function.

9 / 32
 HS611

1. Keyboard Key
Click on the input box above and enter a valid key combination to creat a shortcut. For
example "Ctrl+A", "Ctrl+Z", and so on.

10 / 32
 HS611

2. Mouse Key
Select the function of a Mouse or Wheel. Please see the picture below for detailed functions.
Mouse: Left Button, Right Button, Middle Button.
Wheel: Wheel Forward, Wheel Backward.
Double-Left Click.

11 / 32
 HS611

3. Switch
Select Switch Screen or Switch Brush.
Note: Some software does not support the "Switch Brush" function.

4. Run Program

Browse and select a program that you want to launch quickly. After the setting, you can launch
that program with just a single press.

12 / 32
 HS611

5. System Application
The table below are the functions of Windows and Mac Systems that can be customized on the
Keys.

6. Multimedia

13 / 32
 HS611
To realize the functions such as previous song, next song, play/pause, volume up, volume
down.

7. None
When select None, the keys will have no function.

Working Area

Select the Working Area tab to define the relationship between pen movement on the tablet
and cursor movement on the monitor screen.
By default the entire active area of tablet maps to the entire monitor. If more than one
monitor is in use and you are in extended mode, you need to choose the related monitor on
the driver interface which you are going to map to.
If your monitors are in mirror mode (All monitors display the same content), the tablet maps
to the entire space on each monitor and the screen cursor is displayed on each monitor
simultaneously.

1. Working Area Setting

Define the tablet area that will be mapped to the screen area.
[1] Full Area: the entire active area of the tablet. This is the default setting.
[2] Screen Ratio:As a general rule, be 16:9.
[3] Customized Area:
1> Enter coordinate values.

14 / 32
 HS611
2> Drag the corners of the foreground graphic to select the screen area.

2. Rotate Working Area

By changing the direction of the tablet to adapt to the left and right hand operation. You can
rotate the tablet by 0°,90°,180° or 270°.

15 / 32
 HS611

Digital Pen Setting

1. Press Key
The function setting is the same as the Press Key setting of the tablet. Please refer to it.

See Section.

16 / 32
 HS611

2. Pen Nib Activity

The pen nibs can be set to be Valid/Invalid as needed. Click the drop-down option to select. In
Valid mode, the digital pen can be used normally. In Invalid mode, the digital pen has cursor
movement, but cannot complete the specified action.

17 / 32
 HS611

3. Enable Windows ink

Microsoft Windows provides extensive support for pen input. Pen features are supported in
such as Microsoft Office, Windows Whiteboard, Adobe Photoshop CC, SketchBook 6 and so on.

18 / 32
 HS611

4. Mode Selection
Game Mode: This mode is specially designed for OSU games. OSU game users can turn on
the "Game Mode" to increase the cursor's following speed when the pen tip moves quickly. It
is not recommended for non-OSU game users.
Mouse Mode: When the digital pen moves on the tablet work area, the"absolute coordinate"
mode is adopted by default. After selecting the "mouse mode", it will change to the "relative
coordinate"mode. At this time, the user can use the digital pen like a mouse.

19 / 32
 HS611

5. Pressure Sensitivity Adjustment

The pressure sensitivity will be changed by dragging the slider up and down, the smaller the
value, the more pressure sensitive.
Click the Redo button at the top right of the Settings box to reset the pressure sensitivity to
the default state.

20 / 32
 HS611

6. Pressure Test
You can gradually apply pressure to the stylus on the screen to test the pressure level. Click
the Clear button to clear all the ink.

21 / 32
 HS611

Driver Setting

1. Device
You can view product information.

22 / 32
 HS611

2. Backup
The Driver can import and export your custom settings, which helps to avoid repeated settings
when launching a different program.

23 / 32
 HS611

3. General Setting
[1] Language: Click the drop down menu to select a language.
[2] Color: You can select the color of the Driver interface among Dark, Blue, and Light
according to your preference.
[3] Start Menu: Click to enable or disable AutoStart, New Message Alert, Automatic Updates.
[4] Hotkey: A hotkey can be used to call out the Driver interface quickly, you can set one
according to your usage habits.

24 / 32
 HS611

4. About
Users can check the Driver version number here. Click Check for Updates to view the latest
Driver version and then follow the prompts to update the Driver if needed.

25 / 32
 HS611

Digital Pen Basic Operation

Note: Picture shown is for illustration purposes only.

Hold the Pen

Hold the pen as you hold a normal pen or pencil. Adjust your grip so that you can toggle the
side switch easily with your thumb or forefinger. Be careful not to accidentally press the
switch while drawing or positioning with the pen.
Note:
When not in use, place the pen in the pen case or on the desk. Do not place the pen on the
surface of screen, which may interfere with the use of other screen cursor positioning
equipment, may also cause your computer can not enter the sleep mode.

26 / 32
 HS611

Position the cursor

Move the pen slightly above the active area without touching the screen surface, the cursor
will move to the new position accordingly.
Press the pen tip on the screen to make a selection. Tap the screen once with the pen tip, or
touch it to the screen with enough pressure to register a click.

27 / 32
 HS611

Click
Use the pen tip to tap once on the screen to register a click. Tap to highlight or select an item
on the screen and double-click to open it.

Move
Select the object, then slide the pen tip across the screen to move it.

28 / 32
 HS611

Use the side buttons

The buttons on the pen can be set to two different customizable functions.
You can use the buttons whenever the pen tip is within 10mm of the tablet active area.
You do not have to touch the pen tip to the tablet in order to use the switch.

Pen Nib Replacement

The nib will be wear off after using for a long time, then you need to replace a new nib.
1. Anticlockwise rotate the pen holder to open the cover, take a new nib out.
2. Insert the pen nib into the hole on the bottom of the holder and tilt the pen to pull out the
old nib.
3. Insert the new nib straight into the the pen and push the nib slowly and firmly until it stops.

29 / 32
 HS611

Specifications

Here are the product specifications for you to learn more about the Tablet. If you have any
questions, please feel free to contact us.
The following data will vary in different usage environments and are for reference only.

Appearance
Color: Coral Red, Space Grey, Starry
Blue

Dimension: 333.4 x 218.4 x 7.3mm

Workspace: 258.4 x 161.5mm

Net Weight: 550g

Touch: Touch Strip

Interface: USB-C

Technical Specifications
Digital Pen: PW500

Pen Technology: Battery-Free Electromagnetic

Resonance

Pen Resolution: 5080 LPI

30 / 32
 HS611
Pressure Sensitivity: 8192 Levels

Tilt Support: ±60°

Sensing Height: 10mm

Report Rate: ＞233PPS

Accuracy: ±0.3mm

Press Keys: 10 Programmable Press Keys and

8 Multimedia Keys

OS Compatibility
Windows 7 or later
macOS 10.12 or later
Android 6.0 or later
Troubleshooting Solutions

There is no pressure in the graphics software but the cursor moves.

You may have installed other tablet drivers or opened the drawing software when installing
the driver. Please uninstall all drivers and close the drawing software, then reinstall the Huion
driver. It's better to restart your computer after finishing the installation.

The pen does not work.

1. Make sure you are using the pen that originally came with your tablet.
2. Make sure you installed the driver correctly.

Press Keys does not work.

1. Make sure the Press Keys function were enabled in the driver.
2. Make sure you have correctly defined the Press Keys.
3. Check if the press lock switch is on the unlock position.

The side button of the pen doesn't work.

When pressing the side button, please make sure that the nib didn't touch the tablet surface
and the distance between the nib and surface is within 10mm.

31 / 32
 HS611

How to manually set your tablet to phone mode?

Click Here

How to turn off the HS611 Press keys?

Click Here

If your problem is not resolved, please clickFAQsto view more troubleshooting methods or
email us(service@huion.com).

32 / 32

Powered by TCPDF (www.tcpdf.org)