Advanced View Arduino Projects List

List of Projects using arduino with advance view:

1. Memsic 2125 Accelerometer using Arduino
The Memsic 2125 (datasheet) is a two-axis accelerometer capable of measuring acceleration up to plus or minus 2g.
It has a simple digital interface: two pins (one for each axis) emit pulses whose duration corresponds to the acceleration of that axis. By measuring the
length…... Listed under: Metering – Instrument Projects, Projects

2. FOOT PEDAL ACTIVATED WATER TAP

Greetings everyone! We hope you are in good health. We live in a world where any form of physical contact between two
human beings is starting to pose serious health issues. Keeping this in mind, a while ago, we had worked on an automatic water…... Listed under: Sensor –
Transducer – Detector Projects

3. R/C LEGO® “The Bull” Buggy

There are more than 20 models of LEGO®'s Dune Buggy type car, even more than the models in LEGO® Race Car category. Dune
Buggy is usually four wheels drive off road vehicle,  which would not be used on the road. Now that I got excited on…... Listed under: Game – Entertainment
Projects

4. Arduino Esplora Microphone (Sound Sensor)

This sketch shows you how to read the microphone sensor. The microphone will range from 0 (total silence) to
1023 (really loud). It uses the sound level to set a brightness level for the green LED. When you're using the sensor's reading (for example, to…... Listed under:
Projects, Sound – Audio Projects

5. Pinewood Derby Car Scale With Center-of-Gravity (CG) Calculation

A key factor when building a pinewood derby car is its weight. The Boy Scouts of America and
other organizations specify a weight of no more than 5 ounces. To improve performance many builders will add as much weight (mass) as possible up to
that…... Listed under: Calculator Projects

6. Beach Buddy: 3-in-1 Solar Phone Charger, Boombox, and Sunburn Timer Calculator
Imagine the ideal beach trip. The sun is shining, the skies are blue, the water
is warm, and the humidity is low. You and your friends have everything you need to soak up the sun, sand and surf: a cooler filled with drinks and snacks,…...
Listed under: Battery Projects, Solar energy projects

7. Electronic Dice With Arduino Nano

The electronic dice presented here, built around a tiny Arduino Nano board, mimics the dice we play in different games like
snake and ladders the most popular. Plastic and wooden dice are subject to wear and tear with time and might show biasing toward a specific number…...
Listed under: Game – Entertainment Projects

8. Add Linux, WiFi, Ethernet and USB to Arduino

Web site: http://www.dragino.com/products/yunshield/item/86-yun-shield.html Project Summary: The model of
this shield named Yun Shield, the feature of this shield is as its name. User can add this shield into Arduino (Leonardo, UNO, MEGA2560 etc) and "turn" the
Arduino into device which has similiar features as Arduino…... Listed under: Interfacing(USB – RS232 – I2c -ISP) Projects, Internet – Ethernet – LAN Projects

9. Bike Turn Signal & Brake Light Handlebars

This project was inspired by a very cool kickstarter called Helios Bars. Essentially what this project does, is put an
arduino, LEDs, and buttons into your bike handlebars. The LEDs can be used as turn signals, brake lights, or display ambient colors while riding. It's…... Listed
under: Car Projects, LED Projects

10. Blood Oxygen Heart Rate Meter

This instructables show how to use MAX30102, XIAO and a tiny display to build a blood oxygen and heart rate meter. Step 1:
Sensor & Algorithm This project use Maxim Integrated MAX30102 Biosensor to detect pulse oximeter and heart rate. However, the official sample is…... Listed
under: Metering – Instrument Projects

11. A Robotic lawn mower powered by Solar Energy with an Arduino heart
This robot will mow the grass of your garden, staying within a defined area, avoiding all
obstacles and working in complete autonomy, automatically charging itself with a solar panel. In this post we present a robotic lawn mower, powered with solar
energy and able to…... Listed under: Robotics – Automation Project Ideas, Solar energy projects

12. Paddle for People With Limb Differences and Agenesis to Play Flute
In France and some other countries playing the flute is included in music lessons at school. This project is to
share a possible solution for children or music lovers with limb differences and agenesis to play flute. Basic Idea: Use an Arduino board to make…... Listed under: Sound – Audio
Projects

13. Arduino Control via a Web Service with Teleduino

Convert your Arduino into a sofisticated web control platform using Teleduino. Teleduino is both a product
and a service. Once the Teleduino sketch has been loaded on your Arduino (the 'product'), it then connects to the Teleduino server awaiting your instruction
from anywhere in the…... Listed under: Ideas, Internet – Ethernet – LAN Project Ideas

14. Arduino based Graph
This example shows you how to send a byte of data from the Arduino to a personal computer and graph the result. This is called serial
communication because the connection appears to both the Arduino and the computer as a serial port, even though it…... Listed under: Interfacing(USB –
RS232 – I2c -ISP) Projects, Projects

15. How to Make Powerfull Laser Engraver

Hello Guys Whats up, In this instructable, I am making an Awesome mini laser engraver from old DVD writers. It's very
interesting project for any electronics hobbyist & Engineers. You can use this laser engraver machine to make any kind of design, logo, art on…... Listed under:
CNC Machines Projects

16. Hexapoduino: tiny hexapod 3D printed, Arduino controlled

A few time ago, i found out a 3d printed Micro-Hexapod on Thingiverse. I started to work on it in the
following ways: - create new accessories/components 3D printable - explore the possible ways to drive this hexapod. Here the results: - a
parametric battery holder that fits…... Listed under: Arduino Programmer Projects

17. Arduino Based Counting Tree for Children

Counting can be a fun task for young children. Children as young as two may start saying numbers in no particular
order. A lot of parents start teaching their kids numbers by counting objects around their home. For example, snacks could be counted as the…... Listed under:
Other Projects

18. DIY Binary Clock with Arduino

Yesterday I was going to start watching a movie, when me and my friend pedro decided to give up on the movie and build a
binary clock. After sometime thinking on how to program it, we made it. It works beautifully, so I decided to show here…... Listed under: Clock – Timer Projects,
How To – DIY – Projects, Projects

19. Arduino stepper motor and servos shield

This instructable will show you show to build an Arduino shield which can be used to control 3 servos and 1 stepper
motor using 4 potentiometers. You will need: access to a laser printer/cnc router/etching chemicals 7 x 3 pin 3.5mm terminal blocks 2 x…... Listed under: Motor
Projects, Projects

20. How to Drive 4-Digits Seven Segment With Arduino Using Just 3 Pins
Hello every body, Welcome to this tutorial. In this tutorial we gonna talk about How to drive
a 4-digits 7segment with Arduino using minimum pins. To do this we are going to use very popular IC called 74HC595. It's a 8-bits shift register that has…...
Listed under: Other Projects

21. Track-and-explode wolf collar…

Don't worry! First, this is a rebuild out of a movie so it won't explode for real and it won't be worn by a real wolf. However there
is fursuiting for which I am a big fan of and my own character (fursona) is a…... Listed under: Game – Entertainment Projects

22. Aquarium Light V1

Version 0 My first attempt at an LED Aquarium light started as an excuse to buy some of those LED light strips off of eBay.  I gutted the old
18" fluorescent fixtures and soldered together row after row of 18" RGB LED strips.  They mounted…... Listed under: Home Automation Projects

23. Basic Arduino MIDI Arppegiator

In this instructable I will show you how to make a basic MIDI instrument using an Arduino Uno. This instrument plays three
notes (a triad) in a row. Using the different potentiometers, you can move up and down the notes as well as up and down…... Listed under: Other Projects

24. Super Brite LED Sneakers 1.0 using an Arduino

Create your own Super Bright LED-lined sneakers that blink with multiple patterns. 1.0 FEATURES: - 1 color LEDs -
6 patterns - reed sensors + magnets that give you control to step through patterns - detachable velcro design - small, wearable microcontroller + power Step…...
Listed under: Game – Entertainment Projects, Home Automation Projects, LED Projects, Projects

25. Control Android mobile by an Apple Remote using Arduino

I love to integrate devices which are not supposed to be integrated and this guide shows you how
you can control an Android mobile using Apple’s Remote. (Who said Apple devices work only with Apple products 😉 ) Also this is my entry to the…... Listed
under: Arduino Android, Internet – Ethernet – LAN Projects, Projects

26. DIY ESP32 Security CAM

Hey guys and welcome back, https://youtu.be/cb393Lbfjx4 This is my DIY Security Cam which is made from an ESP32 connected with a 5V Charger circuit
that converts 240V AC into 5V DC for ESP32 to run. The goal for making this project was to make a…... Listed under: Security – Safety Projects

27. Psychic Fortune Teller – An automaton that reads the mind of Twitter
Creepy fairground attraction and Twitter App! The Psychic Hive-Mind Fortune Teller is a
fairground arcade-type attraction which can tell your fortune. Even better than that though - it's also a web-connected Twitter application that can harvest
tweets and regurgitate them as fortune readings! The Fortune…... Listed under: Internet – Ethernet – LAN Projects, Robotics – Automation Projects, Sensor –
Transducer – Detector Projects

28. Bike Dashboard

In this Instructable I'll show you how to make a electronic dashboard for a bicycle. We'll be using an Arduino and a few off-the-shelf parts to
create a system with light control and an LED speedometer. Step 1: Materials Arduino Micro (RadioShack #: 276-258) 12V…... Listed under: Game –
Entertainment Projects, Home Automation Projects

29. Miter Saw Measuring Device

Some of my favorite projects are making tools that I can use with other hobbies. I am not a master woodworker by any stretch, but
I do enjoy it and have created several jigs with my 3D printer that have been useful. If you use…... Listed under: Temperature Measurement Projects 
30. Game maker Rover using an Arduino
In this Instructable I will be giving you step-by-step instructions on how to interface The Arduino, A Motor Controller
(L293D), and a laptop to make a Wifi controlled rover you can drive around your house or work from anywhere in the world. I started and…... Listed under:
Game – Entertainment Projects, Projects

31. Medicine Safe

https://youtu.be/Xhga17IytQ4 We created this project for MSReva as an assignment from school. Supplies Laser or print all parts (see githup):
printed parts: 1x: 14 lock pin sleeve large 1x: 15 lock pin sleeve smal 1x: 17 lock counter pin 1x: 18 pin shooter 14x: 19 tray…... Listed under: Security – Safety
Projects

32. Star Wars Adafruit Flora Theremin LED Bra

Use the force, Luke. Close your eyes, hold on tight to your light saber and........ Don't touch that dial.  No tweaking the
knobs.  Just wave your hands in front of the two sensitive sensors embedded in this bespoke piece of wearable tech. The garment has…... Listed under: Game –
Entertainment Project Ideas

33. IoT Demo

The following model was created as a teaching aid for a demonstration of IoT concepts. The associated PowerPoint is attached to the end of this
Instructable. This Instructable will cover: Creating the Telegram chat group and associated bot.Programming the ESP32.Building the model and electronic
circuit.…... Listed under: Other Projects

34. Bluetooth Controlled Message Droid using Arduino

This is an instructable for a bluetooth controlled Message Droid. I call it R2Blue2. It moves around and
displays messages that you type using your phone or computer. Atleast it was supposed to. Due to many problems such as underpowered batteries and bad
cable management…... Listed under: Arduino Android, Internet – Ethernet – LAN Projects, Projects

35. Flora- an interactive flower

Hello everyone.....Today I have taken something out of my flower garden....We all know,plants have their own lives,they can feel just
as we feel..but they can't express it...But what happens if a flower gains the ability to interact with you? Imagine a flower sitting at your…... Listed under: Home
Automation Project Ideas

36. Wall-E Robot Arduino EasyVR3 (Updated) New Video With Voice Commands..Funny!)
Whilst looking through videos on Youtube one day(Like you do) I came
across a video with a Diy Arduino based Wall e, I thought wow! what a brilliant idea, I didn't at that time even know what Arduino was so I began looking into
it.…... Listed under: Robotics – Automation Projects

37. Build your own Arduino – Bare Bone System

I’ve read through a lot of tutorials online to make an Arduino Clone on a breadboard, and some of them are great,
but none of them really seem to have it all, so I’m going to attempt to bring it all together here and provide…... Listed under: Development Board – Kits Projects,
How To – DIY – Projects, Projects

38. Control an LED With Button Using Swift Language

In the two previous projects, the LED turns on and off automatically. Now, you will control the LED manually
using a pushbutton. Step 1: What You Will Need The parts you will need are all included in this Maker kit. SwiftIO boardShieldButton module4-pin cable Step
2:…... Listed under: LED Projects

39. YABBAS – Yet Another Bare Bones Arduino (on Stripboard)

This Instructable will demonstrate the building of a bare bones (and really inexpensive... less than $5)
Arduino compatible module that can be put together on a small piece of stripboard and can be used either on a breadboard or independently. The following
links / similar…... Listed under: Development Board – Kits Project Ideas

40. Simple Arduino Pot Plant Soil Moisture Sensor

Arduino Pot Plant Soil Moisture Sensor I have been struggling with over watering of my indoor pot plants,
especially succulents. To this end I decided to make a simple Soil Moisture sensor that can tell me when the moisture level of my pot is too…... Listed under:
Sensor – Transducer – Detector Projects

41. Artificial Candle Ignited by Real Flame

Hello again, everyone. In this Instructable, you will see something really cool and exciting and you might not have seen
such a thing yet on the internet. We will design and make a 3D printed artificial candle. But the interesting part of our project is that…... Listed under: Other
Projects

42. Twittering Laser Tripwire with Webcam Capture using Arduino

This instructable will show you how to construct a laser tripwire that can twitter and grab an
image from a webcam, as well as execute any command you can put in a bash script. This instructable is actually quite simple and is even suitable as a
beginner…... Listed under: Internet – Ethernet – LAN Projects, Projects, Video – Camera – Imaging Projects

43. DIY 360 Degree SODAR Device

First off, why did we decide to call this thing SODAR? SOnic Detection and Ranging, or SODAR, is a lot like SONAR and RADAR.
However, we don't feel comfortable calling it SONAR because we have no desire to use it for navigation and we aren't…... Listed under: Sensor – Transducer –
Detector Projects

44. Automatic Food Dispenser From Arduino

Howdy Readers, Dispensers for pets are expensive and this fact is known to all of pet owners But as there is a saying
there is always one or other solution to each of problems! In this instructables we will go through detailed step by step…... Listed under: Other Projects

45. The Next-Gen Deck

By Marcel’s Workshop I spend a lot of time on Genealogy with subscriptions to many services.To make it efficient I copy, paste and refresh
pages often from one database to another.I use 3 monitors so I can go from screen to screen to compare data,…... Listed under: Other Projects

46. RGB’s with Arduino and Processing
Here is an easy(enough) project to introduce you to the Arduino microcontroller, as well as Processing. This is my first
Arduino and Processing project and I didn't have too much bother getting it working. This is my entry to the Sparkfun Microcontroller contest so if…... Listed
under: LED Projects, Projects

47. IOS App for Adafruit Feather NRF52832

The Adafruit Feather nRF52832 has a BLE (Bluetooth Low Energy) functionality that has a lot of potential to be used in
many different projects. In this Instructable, I will be stepping through a project where I created an iOS application that would receive data sent…... Listed under:
Other Projects

48. PixelBrite
I originally started this project because I wanted to recreate the scene in the movie the Close Encounters of the Third Kind where the humans are
communicating with the Mothership via a huge color organ. So I glued various bits of software together and made…... Listed under: LED Projects

49. Analog Read Serial using Arduino

This example shows you how to read analog input from the physical world using a potentiometer. A potentiometer is a simple
mechanical device that provides a varying amount of resistance when its shaft is turned. By passing voltage through a potentiometer and into an analog input
on…... Listed under: Interfacing(USB – RS232 – I2c -ISP) Projects, Projects

50. Arduino Cable Tracer

Instantly diagnose the type and integrity of USB cables with this Arduino Cable Tracer. Suitable to trace USB A, Mini, Mico, and USB-C
cables this is very useful to identify the exact wiring configuration and also diagnose broken connections. Step 1: Gather the Materials and…... Listed under:
Interfacing(USB – RS232 – I2c -ISP) Projects

51. Hack a voice changer to add an Arduino input

Another quick hack. I purchased a voice changer because I was looking for something cheap that could be hacked into an voice
input device. Basically I wanted to animate a skull when I spoke. Added bonus, now the skull puppet would also have a scary…... Listed under: Projects, Sound – Audio Projects

52. DIY Arduino Remote Control and Lego RC Vehicle!!

UPDATE (8/29/13): Thank you readers for your enthusiasm and kind remarks regarding this project! It has
been a tremendous journey since I started this project back in March, but I am very glad with the resulting product and the excitement with which it has been
received…... Listed under: How To – DIY – Projects, Robotics – Automation Projects, Sensor – Transducer – Detector Projects

53. Cyborg Crafts: Sense Like a Cat With Whiskers – Sensory Extension Puppet
I adopted a cat a couple of weeks ago (Figure 2&3). To celebrate, I wanted to make a
cat whisker sensory extension puppet that looks like my cat! This project will show you how to create a computationally enriched puppet that has whiskers. The
Puppet…... Listed under: Sensor – Transducer – Detector Projects

54. 3-dimensional Star Cluster using an Arduino

This instructable will guide you through the process of making your very own star-cluster from LEDs and acrylic. I
made this piece for my electronics final project at college and had access to a machine shop. This instructable assumes that you have access to similar…... Listed
under: Home Automation Projects, LED Projects, Projects

55. Gliderscore Timing Board

Gliderscore is a program developed by Gerry Carter that not only scores a model plane flying competition, but provides timing for the
various flying tasks One feature of Gliderscore Timer is that it outputs a Serial ASCII string that contains the countdown time, the group…... Listed under: Clock –
Timer Projects

56. Matrix sound machine: Generative music with a particle system using Arduino
This project is a part of experiments done while doing an artist in residence at
Instructables. You can see the other projects here. Creating emergent patterns that can be converted into sounds fascinates me. So this is my first experiment
in building an arduino platform for…... Listed under: Projects, Sound – Audio Projects

57. Ardubuino (an Arduboy Compatible Clone)

Arduboy is an open source credit card size gaming console that has an active community not only on its software
where alot of people develop their own game for the platform but also on its hardware where there are also alot of people came up with their own…... Listed
under: Game – Entertainment Projects

58. Lite Brite LED clock using an Arduino

Lite Brite pegs look like LED's don't they?  That's what I though the other day after working on an LED cube for a few hours.
 I happened to see my daughter's Lite Brite sitting there, and I looked at the pile of LED's on my…... Listed under: Clock – Timer Projects, LED Projects, Projects

59. Cheapest Plug & Play Room Automation Setup

Their are many people who are struggling to make projects that are needed for their daily needs. One of the
major example is none other than room automation. Even though many of the room automation setup cost a little bit higher can't we make it…... Listed under:
Other Projects

60. The tweiger counter

The following steps will enable you to build your own tweiger-counter! It searches in current twitter messages sent around the globe for the
words like nuclear, calculates a sliding window average and pushes it to the arduino that will click for every incoming tweet like…... Listed under: Calculator
Project Ideas

61. Sensors in Phone and Arduino Serial Communication
Sensors are one of the crucial things when it comes to building projects/robots. Many a times the sensor might be not
available locally or it might take too long to ship. Smart phone have most of the basic sensors like proximity, accelerometer, light, magnetometer, gyroscope,…... Listed under:
 Sensor – Transducer – Detector Projects

62. DIY 3D Controller using an Arduino

Make a 3D interface using an six resistors, aluminum foil, and an Arduino. Take that, Wii. Update: a much more thorough
explanation of this project is available from Make Magazine. It might be easier to follow their instructions, and I think their code is more…... Listed under: How
To – DIY – Projects, Projects

63. Analog Fabric Joypad using an Arduino

How to make an "analog" input device from fabric and a few other necessary materials. "Analog" in parenthesis because,
although it is made up of 4 analog inputs, the only analog transition between the directions (up, right, down and left) comes from the buffering material…...
Listed under: Game – Entertainment Projects, Projects

64. Arduino Game Controller for Both PC and Android

In this instructables session we are going to see . How to make your joystick . Which is compatible for PC,
Laptop , Smart Phone . By Using UnoJoy Libary. With this libary we can convert a arduino uno into USB game Controller . People…... Listed under: Game –
Entertainment Projects

65. “12 Thumbs” R/C LEGO Dragster

Impressed by these two LEGO® Dragster sets, a 250 pieces LEGO®TECHNIC Dragster 8847 (released in 1983) and a 391 pieces Top Fuel Racing
5533 (released in 1999). These two Dragsters inspired me to build my own LEGO® dragster, the "12 Thumbs". The name "12 Thumbs" came after I…... Listed under: Other
Projects

66. Perimeter Wire Using Matched Filter

Do you want to build a robot that is in an invisible enclosure? Or have you wondered how the robotic lawn mowers stay in
their garden?In this Instructable I will show you how you can easily build a perimeter loop yourself.This perimeter loop uses a…... Listed under: Robotics –
Automation Projects

67. An Arduino Powered (Scale) Speed Trap

After a break of around two decades I've recently started building a model railway. One of the issues I've faced is trying
to work out how fast I should be running the trains so that their speed reflects reality given the scale at which they…... Listed under: Metering – Instrument
Projects, Projects

68. Low Cost, Easy to Build and Use: Arduino Die Toss Simulator
In addition to gambling, dice (die - singular) are used in many board games, e.g., Backgammon,
Monopoly, Yahtzee, Liar's Dice, Dungeons & Dragons, Trouble, etc. Common dice are usually white with black "pips". They are sometime known as d6 or D6. In
this Instructable, the…... Listed under: Other Projects

69. Strandbot – a solar & arduino powered R/C motorized Strandbeest

The Strandbot is a DIY upgrade for the Strandbeest originally designed by Theo Jansen.
 Strandbeests are amazing mechanical creatures that are able to move on their own using just a little bit of wind power.  Unfortunately my tiny apartment is
short on wind, so I…... Listed under: Motor Projects, Robotics – Automation Projects

70. Custom I2C Slave Sensor/device With Arduino

https://youtu.be/7uRn6D0kInY In this Instructable, I'll show you how I managed to create my own I2C controlled
device that I can then connect to any microcontroller and interact with it over I2C. In my case, I'm using it to control an AC dimmer module from a…... Listed
under: Sensor – Transducer – Detector Projects

71. Make your own programmable thermostat for $66 with Arduino
This project will show you how you can create your own programmable thermostat with
temperature probe, an LED readout and ability to remote control outlets. The core of this project is actually a driver for a 4 digit seven segment display. There
are lots uses for…... Listed under: Projects, Temperature Measurement Projects

72. Online Thermometer using Arduino

One of the projects in Practical Arduino is the "Online Thermometer", which combines an Ethernet shield with a number of
DS18B20 1-wire temperature sensors to allow you to read multiple temperatures and make the values accessible using a web browser. In that project I
chose…... Listed under: Temperature Measurement Projects

73. Arduino IoT Cloud ESP32 Alexa Voice Control Smart Home | IoT 2021
In this IoT project, I have shown how to make an IoT-based Home Automation with
Arduino IoT Cloud & Alexa using ESP32 to control 4 home appliances with voice commands. If the internet is not available, then you can control the home
appliances manually with…... Listed under: Sound – Audio Projects

74. Self-balancing skateboard/segw*y project Arduino Shield

General purpose Arduino shield for self-balancing machines. Why did I make it? I previously made an
Instructable in 2010 on how to build a self-balancing skateboard. http://www.instructables.com/id/Easy-build-self-balancing-skateboardrobotsegway-/ There are
>500 comments on this and many express confusion setting up the balance sensors, software and electronics.…... Listed under: Development Board – Kits
Projects

75. DIY Arduino Wireless Motion Alarm System

Hello everybody hope you're doing well, in this instructable I'm going to show you how to make a wireless motion
alarm system, this device consists of a transmitter and a receiver. So essentially it is a pretty simple and basic wireless motion alarm system with…... Listed
under: Wireless Projects

76. How to control LED’s with Processing and Arduino

The other day I was confronted with an interesting problem, I needed to control a series of lights from an
interaction on a computer screen and it had to be as inexpensive as possible.  I instantly thought of an Arduino.  It had everything that I needed,…... Listed
under: LED Projects, Projects

77. PECS Communication Board

The Picture Exchange Communication System, or PECS, allows people with little or no communication abilities to communicate
using pictures. People using PECS are taught to approach another person and give them a picture of a desired item in exchange for that item. By doing so,…...
Listed under: Phone Projects 
78. Arduino Waveform Generator Shield
Waveform generators (also called function generators) are useful for testing and debugging circuits. They can be used to
test the frequency response of electronic components like op amps and sensors or to characterize and troubleshoot audio effects boxes and pedals. This
waveform generator shield is…... Listed under: Projects, Radio Projects

79. DIY Flex sensor using Sugru and graphite powder (Resistencia flexible usando Sugru y polvo de grafito)
Este es el primero de 5 instructables que surgieron del
Instructables & Sugru build night (and day en nuestro caso) que hicimos en el Laboratorio de Juguete, el 20 de julio del 2013:  una Resistencia Flexible o Flex
Sensor hecha con Sugru y polvo de grafito:…... Listed under: How To – DIY – Projects, Sensor – Transducer – Detector Projects

80. Remote Control Arduino Car

A great introductory project for those diving into the IoT and Arduino platform. Working with motors and an IR sensor helps newbies unders
various components and sensors compatible with the Arduino. Using the remote control, you will be able to control the robot's movement allowing…... Listed
under: Car Projects

81. 7-segment Display Using Swift Language

You could always see 7-segment displays around you used to display digits, like in timer, clock, etc. In this mission, you
are going to learn how it works and display numbers on it. Let's start. Step 1: What You Will Need The parts you will…... Listed under: Clock – Timer Projects

82. Arduino Audio DAC Options

DAC is short for Digital to Analog Converter. In this article we play around the code Michael Smith created for a PWM based DAC. I
modified his code so that other DAC options could be tried. I compare the 8-Bit PWM DAC with the R2R…... Listed under: Projects, Sound – Audio Projects

83. Laser Shooting Game

This laser game is a simple project that utilizes an Arduino mini. All target boards have an Arduino, sensors, and servo control ports.
Shooting the target center triggers the servo and the board falls flat. Step 1:What you need [box color="#985D00" bg="#FFF8CB" font="verdana" fontsize="14
"…... Listed under: Game – Entertainment Projects

84. Laser Tag “Free for All” Circuit Playground Express and ESP8266
This is an easy way to make your boards into a fun laser tag game to play with friends. we
combined both boards as described in the pictures. Supplies For this project you will need IR remotes, shoe laces, circuit playground express, ESP8266, battery
case…... Listed under: Game – Entertainment Projects

85. Clock Two – Single digit clock using Arduino

Time for another instalment in my irregular series of clock projects. (Or should that be “Time for another instalment
in the series of irregular clock projects”?) In contrast with the extreme “blinkiness” of Clock One, in this article we describe how to build this single-digit…... Listed
under: Clock – Timer Projects, Projects

86. GRBL Based Coil Winder From Water Pipe

When I was working on the Toy Magnetic Levitation project with a solenoid coil, I thought to myself, why didn't I make
a coil winder. So I took my times to build a simple coil winder based on GRBL firmware and it was made from PVC pipes.…... Listed under: Other Projects

87. Your Image on an Arduino! – TFT LCD Screen Guide

Have you ever heard of TFT LCD screens?  They are great ways to display information from your Arduino, or
display pictures.  The Arduino team just released an official TFT LCD screen with their new Robot at Maker Faire 2013.  It's very easy to get started…... Listed
under: Video – Camera – Imaging Projects

88. Electronic Arrow Spine Tester

This Instructable describes the construction of an electronic archery arrow spine tester. An arrow spine tester measures the
stiffness of arrows. This helps an archer to construct arrows of uniform specifications which will shoot consistently. Traditional arrow spine testers measure
arrow stiffness, or spine, by…... Listed under: Other Project Ideas

89. 3D Printed Kitchen Scale Using an ESP8266

Hello everyone ! Today I'm going to show you how I built this little kitchen scale during this lockdown ! It can measure
weights up to several kilograms, has an included battery, a nice display and can even be turned into a connected scale thanks…... Listed under: Temperature
Measurement Projects

90. EDISON Radio

This project is bases on the internet radio by Ed Smallenburg. He did an awesome job in creating a working internet-based radio. He shared his
coding and hardware on the world wide web so that people like you and me can learn from it. He…... Listed under: Radio Projects

91. Multiplexing 7 Segment displays with Arduino and Shift Registers

In this instructable, I will be teaching the basics of multiplexing 7 segment displays using an
Arduino and a couple of shift registers. This project is well suited for displaying numerical information or if you want to control a bunch of LEDs. For beginners,
like me,…... Listed under: Calculator Projects, LCD Projects

92. Halloween Pop-Up Prop

https://youtu.be/nJx_GmmiR7A This was my first animated Halloween prop. I found this witch at the local hardware store. It was meant to hang up by a
cord and if someone came close to it, an infrared sensor would trigger the prop. The prop has LED eyes…... Listed under: Other Projects


 93. DIY 3D Laser Scanner Using Arduino
Maker Alessandro Grossi sent us this great DIY build for a 3D scanner built using a laser, a DSLR, and an Arduino controller.
Allesandro is a Mechanical Engineer, holding a Ph.D. in product design. His day job involves helping designers and manufacturing firms develop and…... Listed
under: How To – DIY – Projects, Projects

94. Halloween Animated Knights

About a week or so after Halloween last year (pre-COVID), I happened to be in Home Depot and back in a far corner bin were
several Halloween items very heavily discounted. They were just trying to get rid of them as fast as they could.…... Listed under: Other Projects

95. IPod Information Screen Rev. 2

I'm not usually one to revisit a project after I've finished it, but I made an exception because the problems with the original
design were making this device unpleasant to use. For those of you just now viewing this project, it is the second iteration…... Listed under: LCD Projects

96. Tank Level Alert for Pellet Stove

If, like me, you have a pellet stove which does not indicate the low level of the tank, I suggest this little module which will beep
when the reserve is almost empty. This gap is problematic because when there are no more pellets, the stove…... Listed under: Sensor – Transducer – Detector
Projects

97. The Digital Drone Synth

Making a hardware synthesizer is a really fun and rewarding experience. But usually with a lead synth you would want to implement
ADSR envelopes, multiple adjustable oscillators, multiple types of filters for each, polyphony et cetera et cetera. Those aren't conducive to a beginner
project,…... Listed under: Sound – Audio Projects

98. An Arduino RSS Feed Display

This Arduino project will display RSS feed headlines on an LCD via an Arduino and a USB cable. It works quite well, and lets you
keep up with the world news while you're sitting at your desk. Many of the values in the code can…... Listed under: Internet – Ethernet – LAN Projects, LCD
Projects, Projects

99. CO2 Monitoring As an Anti-Covid19 Measure

pierre.carles@sorbonne-universite.fr, January 2021 Here, we propose an open-source, portable, autonomous,
cheap and easy-to-use device to monitor and record the concentration of CO2 in ambiant air in real-time. Using CO2 as a proxy for respiratory aerosols, the
device can help define best practices regarding the ventilation…... Listed under: Temperature Measurement Projects

100. Arduino Powerd, RGB + White LED, Bluetooth controllable, Floor lamp
A couple of mounts ago i order a 1M long WS2801 RGB led strip, just for fun. I took me a
while to get the strip working with my Arduino. The next step was to figure out what to do with the strip. after some…... Listed under: LED Projects

101. Automatic Weight Scale and Timer for Machine La Marzocco Linea Mini
in the Coffee's era, the current era is called the third wave coffee era. In previous eras,
coffee quality was not as much attention as it is today by connoisseurs. Specialty coffee offers quality preserved from farm to coffee in the cup. One of the…...
Listed under: CNC Machines Projects

102. Display Images on OLED Display | Ft. Instructables Robot

Hi guys, in this instructable I will be teaching you how to display any image on an OLED display using
an Arduino board. I know that this topic is quite addressed on the internet but still when I tried it myself, I found it very…... Listed under: Robotics – Automation
Projects

103. Rainbow Jar – RGB Pixel Strip Controlled via Arduino

Our most popular item on our display at Maker Faires is always the Rainbow Jar. One customer has already replicate
we thought we'd share how we made it so you can make your own! https://vine.co/v/hqxpVgdFQ9z (tried embedding this vine but it breaks instructables!)
Step…... Listed under: LED Projects

104. Customizable Keypad Matrix (Use It As Shortcuts for PC)

https://youtu.be/oyFXOmdzXOM The of the shelf Keypad Matrix is great but they only come in numeric
or alphanumeric types. If you want to make a Keypad Matrix whose keys are designed for your needs then this is the Instructable for you. In this Instructables, I
will…... Listed under: Other Projects 
105. A Modern Take on the Phenakistoscope
The Phenakistoscope is an early optical illusion device that uses static images to create the illusion of motion through
the principle of persistence of vision. It is regarded as one of the first forms of moving media entertainment that paved the way for the motion…... Listed under:
LED Projects

106. ARDUINO with XBEE- WIRELESS SETUP DEMO

This video describes how to configure two Series 1 XBEEs using Arduino UNO board.The ways of making 2 way
communication is also tested on Wireless mode. Overview The Xbee shield allows an Arduino board to communicate wirelessly using Zigbee. It is based on
the Xbee module…... Listed under: Development Board – Kits Projects, Projects

107. Magic Dome

Francisca Molero Luque, Dolores Martín Cabrera and Laura Mejía Ospina, students of 'Creative Electronics', a Beng Electronics Engineering module
at the University of Málaga, School of Telecommunications. We decide to make as final project a derivation of Interactive Geodesic LED Dome. Supplies -
NeoPixel Digital RGB LED…... Listed under: LED Projects

108. Super Simple Arduino Powered Roomba Scheduler

Like most people I was skeptical about getting a robotic vacuum cleaner, so as a trial run I thought I would
buy the now obsolete iRobot Roomba 530 which was heavily discounted (they're still available in Australia, showing how behind the times we are). Of…... Listed
under: Robotics – Automation Projects

109. LED Chaser Game

Hello, my name is Vigas Balachandran and on this instructable, I will be presenting my final project. For this project, I have created a LED
chaser game. In this game, the LEDs will be flashing in consecutive order. On the serial monitor on the arduino,…... Listed under: LED Projects

110. Arduino String Case Change Functions Code

The String case change functions allow you to change the case of a String. They work just as their names imply.
toUpperCase() changes the whole string to upper case characters, and toLowerCase() changes the whole String to lower case characters. Only the characters A
to…... Listed under: Development Board – Kits Projects, Projects

111. DIY: ARDUINO SOUND SENSOR SYSTEM

I have a major problem when it comes to talking on the phone or playing video games with my friends - I often get loud
(that's quite an understatement). Since I live with my parents, this often triggers my mother and she usually ends up…... Listed under: Sensor – Transducer –
Detector Projects

112. Blink LED using Arduino

This example shows the simplest thing you can do with an Arduino to see physical output: it blinks an LED. Circuit To build the circuit,
attach a 220-ohm resistor to pin 13. Then attach the long leg of an LED (the positive leg, called the…... Listed under: LED Projects, Projects

113. Yogy – The Arduino Powered Robot Made For Kids

In this Instructable I will show you how to make a cute and kid friendly Obstacle Avoiding Robot I like to call
Yogy. Yogy gets his name from the Yoghurt tub body he is made from. I am a sucker for seeing the best in…... Listed under: Robotics – Automation Projects

114. Arduino Safe With Multivibrator Changeable 4-digit Combination

This instructable will explain how to wire, code, and build a functioning DIY arduino safe with
multivibrator changeable 4-digit combination. Well what does that mean? A arduino safe with multivibrator changeable 4-digit combination is a functioning safe
with a changeable password/combination, it features a series…... Listed under: Security – Safety Project Ideas

115. NeoPixel Ancient Oil Lamp

In this Instructable, we will describe how to turn a "retro" oil lamp into a NeoPixels based rechargeable lamp with colorful light effects. Supplies
Arduino nano12 bits NeoPixel ringMicro USB 5V 1A TP4056 Lithium battery charger module3.7V 9800mAh Lipo Li-polymer BatteryRotary encoder Ec11 or KY-040…... Listed
under: Other Projects

116. Analog Write with 12 LEDs on an Arduino Mega

This example fades 12 LEDs up and the down, one by one, on an Arduino Mega board. Circuit image developed
using Fritzing. For more circuit examples, see the Fritzing project page Connect the longer, positive legs of (anodes) 12 LEDs to digital pins 2-13 through 220 ohm
current limiting resistors. Connect…... Listed under: LED Projects, Projects

117. Arduino: Portable Two-Axis Stepper Control

https://youtu.be/r_2DXRlM29s In a previous tutorial we have seen how to run two stepper motors synchronously
from a given start position to a defined destination using an Arduino and a very simple “user interface”. That user interface was restricted to some
microswitches and LEDs, both installed on a…... Listed under: Motor Projects

118. Digital/Analog Clock – Arduino + PaperCraft

In this instructable we will be recreating a clock inspired by Alvin Aronson's original design. When I first saw this
clock I was very impressed by how clean an elegant the design was I immediately wanted to recreate this effect. I hope some of you feel…... Listed under: Clock –
Timer Projects

119. Wordclock – No Special Tools Required! Easy to Build

Hi makers, do you want to own a wordclock?There are a lot of nice instructions all over the web, but You've
no access to a 3D printer and cnc machines to cut, laser or millYou don't want to waste time and nerves fiddling with itsy-bitsy partsYou…... Listed under: Clock –
Timer Projects 
120. Arduino Hello World Blink Code
This is a basic example how arduino works. In this arduino projects you’ll see how arduino control LED on for 1 second and off
for 1 second repeatedly. Instruction; 1) Connect cathode lead of LED (shorter lead) to ground pin and anode lead of LED…... Listed under: LED Projects, Projects

121. Autonomous Autonavigation Robot using Arduino

This is a step by step guide to build an autonomous navigation robot. We use the Arduino microcontroller to
control this robot. We have two different programs for this robot. The first enables the robot to drive around and avoid anything that gets in its…... Listed under:
Projects, Robotics – Automation Projects

122. 2 Bit Adder Binary and Decimal Calculator

By: Sonya Singh Computer Engineering Step 1: Project Overview Have you ever dreamed of building a 2-bit adder
calculator, which can display the results in both binary and decimal? Well, look no further - Through this guide, your dreams have finally come true! Not only…...
Listed under: Calculator Projects

123. AAA Robot (Autonomous Analog Arduino)

The AAA Robot is a perfect robot for beginners. It is versatile, easy to build, and discusses many of the topics
roboticists need to learn, including but no limited to transistor switches, motor driving nad analog sensors. This Instructable includes step-by-step instructions
on how to…... Listed under: Robotics – Automation Projects

124. How to Motorize a Camera Slider (Battery Powered)

When making videos with a tripod fluid head, there aren't that many movements you can do. You've got tilt
and pan - so basically either a vertical movement or a horizontal movement. Both of these have one common characteristic: the camera stays in pretty much…...
Listed under: Video – Camera – Imaging Projects

125. An Arduino Thermometer with Digital Display

This is a project for Arduino to make a Thermometer with Digital Display, aimed at beginners. Arduino measures
the voltage on a TMP36 Temperature sensor, converts the Voltage to Degrees Celcius and Displays the value on an LOL shield display. Objectives: * Learn how
to…... Listed under: LED Projects, Temperature Measurement Projects

126. Arduino Activated Light Catcher Arcade Game

This pandemic time has been rough for us all, as it confined us in our homes thus not enabling the opportunity to
go outside and meet with family and friends to engage in fun activities of all sorts, such as going to your nearby arcade…... Listed under: Game – Entertainment
Projects

127. Cell phone text using an Arduino

Arduino text‘in. Key Features: 24 relays controlled by 4 I/O lines! Cell phone text using your Arduino. This project hacks a cell
phone to text using normally open relays. After investigating cellular modules on the internet I decided it looks not only rather pricy, but…... Listed under: Phone
Projects, Projects

128. PAD HERO (Guitar Hero Using Arduino)

A group of three students present you PAD HERO, our Arduino based Guitar Hero game. This project was submitted to
'Creative Electronics', a Beng Electronics Engineering module at University of Málaga, School of Telecommunications (https://www.uma.es/etsi-de-
telecomunicacion/). The aim of this Project was to replicate the popular…... Listed under: Game – Entertainment Projects

129. Thermal Camera

Have you ever had the desire to see what can not be seen? I never had the ability to see in thermal infrared, and it is rather cool to be able to
see in the thermal infrared part of the electromagnetic spectrum. Unfortunately, most thermal…... Listed under: Temperature Measurement Projects, Video –
Camera – Imaging Projects

130. Location Tracking “Weasley Clock”

As with so many other people, I've always been a massive Harry Potter fan. One of the coolest magical items in the series was almost c
the Weasley family clock that had a hand for each family member, and moved to reflect their location. I…... Listed under: Clock – Timer Projects

131. Arduino FM radio receiver shield

This Instructable will show you how to build your own FM radio receiver shield to be used with an Arduino board. The radio
chip we are going to be using is the AR1010 on a breakoutboard found at Sparkfun or Electrokit and there will be code to get…... Listed under: Projects, Radio
Projects

132. Arduino/ESP32 Capacitive Touch Sensor

Adding touch interfaces to your projects might seem difficult at first, but it really isn't. In this Instructable I'll show you
how to do it using an Arduino or ESP32 development board. What you will need: an Arudino* or ESP32 development boarda wiresome tinfoilsome sticky…...
Listed under: Sensor – Transducer – Detector Projects

133. Classroom Pencil Protection Machine

HEY KID, GIVE ME BACK MY PENCIL! As a teacher, one problem I face every day is losing my pencils. Now pencils don't just
disappear, they walk away in the hands of my middle school students. I know this may not seem like a big…... Listed under: CNC Machines Projects

134. ArrDrownHo! – Easily convert AVR to Arduino

Cap'n ArrDrownHo! is the lovechild of Ardweeny and Boarduino and he's here to commandeer your AVR ships.
ArrDrownHo! inherits pros of both and cons of neither. Pick up an AVR chip and start prototyping instantly on a breadboard! Want to replace that costly Arduino
in your project with a…... Listed under: Development Board – Kits Projects

135. Kaosduino: Create your own kaosillitaor using Arduino

This project is a part of experiments done while doing an artist in residence at Instructables. You can see
the other projects here. Inspired by Korgs Kaossilator I took it upon myself to build an opensource version of it. This way people can design new ways…... Listed
under: Projects, Sound – Audio Projects

136. Splash! Water Droplet Photography

I have been shooting water drops for a while now.... since 2017. I still remember how excited I was when I got water drops
bounce from the surface with my first setup I made with Littlebits... With these setups (Mark I and Mark II) I…... Listed under: Video – Camera – Imaging Projects


137. Whiteboard Erasing Robot using Arduino
My entry for the Microcontroller contest is a whiteboard cleaning robot. The goal of this project was to create a robot
which could erase written text on a whiteboard completely autonomously, i.e. no human interface. The processes involved in this project included devising a
method…... Listed under: Robotics – Automation Project Ideas
138. The Point Shooter Cyborg Mouse
Control cyborg technology and revolutionize your PowerPoint presentations - build a wearable mouse! So you converted some
video glasses to a heads-up display glass. You built a wearable Raspberry Pi, pcDuino, or BeagleBone Black. Now, how do you control your cybernetic
augmentations? You make a…... Listed under: Robotics – Automation Projects

139. Smart Glasses(Under $10!!!)

Hi There! We all are familiar with Smart Glasses like the one named E.D.I.T.H. made by our beloved character Tony Stark which was
later passed on to Peter Parker. Today I am going to built one such smart glass that too under $10! They're not…... Listed under: Bluetooth Projects

140. Arduino Esplora Pong

Want to play Pong on your computer with your Esplora? This example shows you how. This example is designed to be used with a
Processing sketch. Processing is an open source programming environment. The Esplora reads the slider and buttons and sends data to the…... Listed under:
Game – Entertainment Projects, Projects

141. Single button combination lock using Arduino

Time for something different  - a single button combination lock. Allow me to explain… Updated 18/03/2013
Normally a combination lock would require the entry of a series of unique numbers in order to unlock something or start an action. For example: A more
contemporary type…... Listed under: Projects, Security – Safety Projects

142. 3D Printed Spirometer

Spirometers are the classical instrument to perform the parsing of air as it is blown out of your mouth. They consist of a tube that you
blow into that records the volume and speed of one breath which are then compared to a set of…... Listed under: Metering – Instrument Projects

143. How I Made My Own Boxing Machine?

https://youtu.be/xl0zlpLf4oA There is no amazing story behind this project - I just always liked the boxing machines,
which were located in various popular places. I decided to build mine! Step 1: Designing In the beginning, I designed a 3d model of my device. Boxing pear,…...
Listed under: CNC Machines Projects

144. The Knock Box: Build a Knock-Sensitive Power Strip

The Knock Box is a power strip with superpowers - it turns on your lamp whenever you knock on your nightstand. You
two outlets, individually controlled by knock-knock-knocking on a nearby hard surface. It's great for hitting the lights when it's pitch dark, but if an…... Listed
under: Development Board – Kits Projects

145. Quasi real-time oscilloscope using Arduino

Recently I was reviewing one of my oldest project, and decided to “refresh” previous design by taking full advantage
of the new arduino Leonardo board.  Based on AtMega32U4, which include PGA (programmable gain amplifier), oscilloscope’s  analog front end doesn’t require
external OPA this time, end…... Listed under: Metering – Instrument Projects, Projects

146. Flame the Candle by Snapping Your Finger

Hi guys, we will make an interesting project in this project. We will try to make a flame by snapping our finger.Let's
get started on the project. Step 1: Video Tutorial https://youtu.be/Cg31TzChpbw You can see the project step by step with this video tutorial. For…... Listed
under: Sensor – Transducer – Detector Projects

147. 14band Graphical Equalizer

Here comes a simple Graphic Equalizer showing 14 audio bands from 60Hz up to 16kHz. It consist of a PCB based on MSGEQ7 and
ESP dev board. Since a MSGEQ7 chip recognizes 7 bands only and an ESP dev board gives us a chance to…... Listed under: Other Projects

148. The Raspberry Pi – Arduino Connection

The Pi is a fine little computer board, though not nearly as good as the Arduino when it comes to I/O capabilities. The
beautifully-engineered Gertboard is a plug-in add-on that neatly overcomes this deficiency by giving the Pi access to an ATMega328, but it's a very…... Listed
under: Development Board – Kits Projects

149. High Heel Massage using an Arduino

My project is to make a heel (shoe) that senses when your foot is tired and then eases the pain. I will have a force sensor
measure how much pressure is on your foot for 3 minutes. If the pressure is at a certain measure…... Listed under: Home Automation Projects, Projects, Sensor
– Transducer – Detector Projects

150. Automated Arduino Tap

This project was designed for my dog, who refuses to drink from a water bowl. She often sits by the tap for hours waiting for someone
to pass and open it for her. So I built her this automatic tap that opens when it senses…... Listed under: Sensor – Transducer – Detector Projects

151. How to use a Piezo element to detect vibration using Arduino

This tutorial shows you how to use a Piezo element to detect vibration, in this case, a knock on a
door, table, or other solid surface. A piezo is an electronic device that generates a voltage when it's physically deformed by a vibration, sound wave,…... Listed
under: Projects, Sensor – Transducer – Detector Projects

152. Paper Man: a machine created by Arduino and NFC

Paper Man is a machine comprised of Arduino, NFC Shield, thermal printer and a papercraft shell—Iron
Man. Thanks to the NFC Shield, you can directly sent messages from your mobile to the paper man, and the paper man will spit it out by printing with…... Listed
under: CNC Machines Projects, Home Automation Projects

153. Living Pixels – Imagine Technology Has Life

Seeing smart home products being more common in our lives, I’ve started to think about the relationship between
people and these products. If one day, smart home products become an indispensable part of everyone's life, what attitudes should we take to coexist with

them? How…... Listed under: Other Projects
154. DIY Arduino Bluetooth Controlled Car
Hello friends! My name is Nikolas, I am 15 years old and I live in Athens, Greece. Today I will show you how to make a 2-
Wheel Bluetooth Controlled Car using an Arduino Nano, a 3D printer and some simple electronic components! Make sure to watch…... Listed under: Bluetooth
Projects

155. Sending and Receiving String via UDP using Arduino

In this example, you will use your Ethernet Shield and your Arduino to send and receive text strings via the
UDP protocol (Universal Datagram Packet). You'll need another device to send to and from. The Processing sketch included at the end of the code will…... Listed
under: Internet – Ethernet – LAN Projects, Projects

156. Mr. Indecision – a small felt version of yourself that turns its head and looks at you using Arduino
This is a tutorial on how to use 123D Catch to get a 3D scan of
your whole body. Once you have the scan or "catch" the tutorial will take you through a technique to clean it up and manipulate it ready for 123D Make.…...
Listed under: Game – Entertainment Projects, Projects, Sensor – Transducer – Detector Projects

157. Water Surface Lamp

This Instructable will show you how to make an atmosphere lamp that lights up just like making little waves on the water surface. It can be
placed on your table, shelf, or bedside to create a harmonious atmosphere, bringing an absorbing experience to the user.…... Listed under: Other Projects

158. Arduino Beginner and Basic Electronics Kit Primer

I learned that one of my nieces had an interest in programming.  She was working with robotics at high school and has a
summer internship where they had  Arduinos.  I think she was able to borrow an Arduino to experiment with at home but every…... Listed under: Development
Board – Kits Projects

159. Gyroscope Platform/ Camera Gimbal

This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida
(www.makecourse.com) tep 1: Materials List In order to begin the project, you first have to know what you'll be working with! Here are the materials you…...
Listed under: Video – Camera – Imaging Projects

160. Automatic Hand Sanitzer for Your Car

https://youtu.be/IYw2ApjvN8I The United States of America currently holds 20% of the infected individuals with the
COVID-19 virus. Considering the ongoing pandemic, an automatic hand sanitizer would result in a decrease of viral spread when placed in the center dash,
whenever travel is necessary using a…... Listed under: Car Projects

161. Scintillino – an Arduino-based quick&dirty scintillation counter

Have you ever wondered about the radiation levels around you? Well today you can build your
very own detector that measures ionizing radiation and displays data in real-time on an LCD (and also your computer if you want). The visual design, as seen
below, is…... Listed under: Calculator Projects

162. Simple Inexpensive Wireless With Any IR Remote, Including No Longer Used Ones
I hope you will find this Instructable interesting and useful. It is only three (3)
steps long, plus an introduction. If you do find this article helpful, even if it is relative to when you see it some months or years old, please be kind…... Listed
under: Wireless Projects

163. Arduino Quadruped Robot Stalker

Arduino Quadruped Robot - Stalker I am going to build an Arduino Quadruped Robot. As usual, I will share my source code
and show as many pictures as possible, to help those of you who are also building Quadruped robots. The way I do things might not…... Listed under: Projects,
Robotics – Automation Projects

164. Inverter Aurora ABB (Power One) Web Monitor (WIM) With Esp8266
Autonomous centraline with an esp8266 that grab and store data from inverter and show
charts and various data of production and can send notification email if there are some problems. It is a quite user-friendly browser based monitoring solution,
It's allows to track energy produced on a solar power plant in a simple and intuitive fashion.…... Listed under: Other Projects

165. Dimmer using an Arduino

This example shows how to send data from a personal computer to an Arduino board to control the brightness of an LED. The data is
sent in individual bytes, each of which ranges in value from 0 to 255. Arduino reads these bytes and uses…... Listed under: LED Projects, Projects

166. Mystery Beeping Prank

The Mystery Beeping Prank is a device hidden in a hollowed out book that beeps intermittently at different frequencies. I made this
because I am surrounded by a lot of incredibly creative people who have a penchant for pranking one another, and this seemed like…... Listed under: Game –
Entertainment Projects, Sound – Audio Projects

167. 3D Printed Mini CNC Machine

Introduction! https://youtu.be/VwgZXWHkp14 Hi Friends Welcome to the DiY Projects Lab insctructable , I hope you all are well, so
today we are going to learn how to make your own 3D Printed CNC machine. It is a prototype module, but once you build it you…... Listed under: CNC Machines
Projects

168. Brainwaves Bend a Fork

In the 1970’s, a psychic named Uri Geller introduced spoon-bending using his mental powers and became famous for it. Well, I don’t
claim to be a psychic, but I thought it would be fun to be able to bend a spoon or fork using my…... Listed under: Motor Projects

169. Arduino Controlled Catapult

I recently had the idea to create a catapult, But not just any kind of catapult, an electronic catapult! I wanted something I could just
sit it down hit some buttons and watch it do its thing without being to big. This is what I…... Listed under: Other Projects, Projects

170. Emoticon Helmet using Arduino

The Internet has become a pretty good mask to portray yourself as anything you want. This includes hiding your true emotions
when posting facebook statuses, IMing someone, or sending emails (like telling you're boss they are awesome when they are really a jerk). But what…... Listed
under: Game – Entertainment Project Ideas, Ideas

171. Arduino Eye Strain Alarm

With the COVID quarantine moving life online, I now spend many hours looking at my computer screen. Whether I'm doing school

virtually, connecting with friends and family, or working on projects, all of these things keep me looking at my screen, as I am doing…... Listed under: Other
Projects
172. How to Make a Tactile Feedback Compass Belt
Have you ever wondered how migratory birds manage to have such an amazing sense of direction despite being
so generally clueless? They can sense the Earth's magnetic field with what is basically a compass built into their body. Wouldn't it be cool to feel what…... Listed
under: Metering – Instrument Projects, Sensor – Transducer – Detector Projects

173. Arduino Liquid Crystal Displays

I had initially planned to do an LCD tutorial a little further down the line, but there was very high demand for it, and I already had
a circuit assembled for testing the new LCD that element14 sent me to evaluate. So, this seemed like…... Listed under: LCD Projects, Projects

174. GameBoy 5110 – Arduino Handheld Game Console by 3D Printing

During the COVID-19 crisis, how to spend a lot of quarantine time at home? In addition to
improving cooking skills and doing sports, game lovers can also make their own unique GameBoy game console! The blue backlit LCD screen of the Nokia 5110
is used…... Listed under: Game – Entertainment Projects

175. Interfacing Electronic Circuits to Arduinos

Interfacing Electronic Circuits to Arduino In this instructable I use an example of interfacing an Arduino to an ARINC
429 transceiver in order to demonstrate the general process of interfacing an Arduino to electronic circuits so you can use these techniques on your own
designs.…... Listed under: Interfacing(USB – RS232 – I2c -ISP) Projects, Projects

176. Gandalf’s Magic Staff

Who wouldn't want Gandalf's Magic Wizard Staff? Turns out Gandalf had various staffs and either lost, broke or upgraded them frequently!
This provides us with multiple staff designs and there are plenty of methods of constructing your own Magic Gandalf Staff depending upon your resources…...
Listed under: Other Projects

177. Analog Clock And Temperature sensor On An Oscilloscope using Arduino

Scopeclock is an easy to use hardware to make your X-Y capable analog oscilloscope
more useful .Using this simple to use hardware you can convert your analog oscilloscope into a scope clock.This project was me and my friend kshitij gupta at
CEDT nsit under the…... Listed under: Clock – Timer Projects, Projects, Sensor – Transducer – Detector Projects, Temperature Measurement Projects

178. How to make A light-up distance sensor

In this instructable, I will show you how to make a sensor that will light up more lights the closer you are to it. Step 1:
Placing The Electronics This step will show you where and how to place the electronics on the breadboard Materials:…... Listed under: Sensor – Transducer –
Detector Projects

179. Arduino Based Self Balancing Bot

Hey everyone what's up! https://youtu.be/0KDyb7F0C_8 So here's my 3D Printed Self-balancing robot which is powered by an
Arduino nano board and has an MPU6050 to get the accelerometer and gyro readings to balance itself using the PID function. This robot setup itself is almost
3D…... Listed under: Robotics – Automation Projects

180. Home Automation (or Robot Butler called Geoffrey) – iPhone controlled, arduino based
Being able to control everything from your pocket has long been a
dream shared by many. Previously we've had universal remotes that can both control our TVs and radios, then we had wireless wall sockets. Both great things,
but how likely is it that you're…... Listed under: Home Automation Projects, Phone Projects, Robotics – Automation Projects

181. Save data of temperature and humidity on MySQL with Arduino Uno and Wifly
Hello guys, i make this instructable for the people that  liked the electronics and
the botanic, with this you have the data about  the temperatura and the humidity of your orchard and register this in a data base MySQL. For this proyect you
need some…... Listed under: Home Automation Projects, Internet – Ethernet – LAN Projects, Projects, Temperature Measurement Projects

182. Make a Digital Photo Album by ESP32

Last week I made an electronic photo album that I could place on my work desk to show some photos. I can take a look at
relaxing when I'm tired at work. Previously I have implemented the display of pictures in which the format is…... Listed under: Other Projects

183. ESP32 TTGO WiFi Signal Strength

In this tutorial we will learn how to display a WiFi network signal strength using ESP32 TTGO board. Watch the video!
https://youtu.be/dHsG1XZqR9E Step 1: What You Will Need TTGO ESP32WiFi connectionVisuino program: Download Visuino Step 2: Start Visuino, and Select the
Arduino TTGO T-Display ESP32 Board…... Listed under: Wifi - WLan Projects

184. Arduino String Addition Operator Code

You can add Strings together in a variety of ways. This is called concatenation and it results in the original String being
longer by the length of the String or character array with which you concatenate it. The + operator allows you to combine a…... Listed under: How To – DIY –
Projects, Projects

185. DIY Programming Cable Using Arduino Uno – Baofeng UV-9R Plus
Hey Everyone, this is a simple guide on how to convert your Baofeng UV-9R (or plus)
Headphone / ear piece cable into a programming cable using an Ardunio UNO as a USB Serial Converter. [DISCLAIMER] I do not take any responsibility in any
damage caused…... Listed under: How To – DIY – Projects

186. Gut Check a Tweeting and Facebooking Fridge using Arduino

I have a problem, I'm trying to lose weight but I love snacking late at night. And no one knows that I
even do it. That being one of my biggest hurdles, I figured why not include all my social media friends and followers in…... Listed under: Home Automation
Projects, Internet – Ethernet – LAN Projects, Projects

187. Baby Eats, Alternative Video Game Controller

This Instructables will teach you how to make the alternative controller to play my short game, Grogu Eats, on
itch.io! This Instructables will be very basic up until the soldering. If you want to make this project, I recommend looking at soldering tutorials when you get…...
Listed under: Game – Entertainment Projects

188. Personal Space Defender

A simple and elegant way to help keep your personal space bubble from being invaded by close talkers and overly huggie people.   This is a stolen or
borrowed idea from Phillip Torrone of Adafruit, who mused about something like this on an episode of…... Listed under: Sensor – Transducer – Detector Project
Ideas

189. How to Display Images on OLED Using Arduino
Hello there fellow learners, in one of our previous blog on OLED, we learnt how to wire and code OLED. We also
learnt to display simple text using Arduino code. So today in this blog, we will learn how we can use images and custom bitmaps to…... Listed under: LED
Projects

190. Arduino led pendulum

Step 2: Putting up the wires Strip both ends of wires -insert one end of each wire into sockets numbered -Gnd(black wire in my case)-this
will be the common ground connection - 13  (green wire in my case) - 12  (yellow wire in my case) -…... Listed under: LED Projects, Projects

191. Arduino Text I/O for Real World Applications

Quick Start This tutorial will take you through the steps you can use to successfully process Real World text I/OYou
should avoid using any Serial methods in your loop() code and any code it calls. (see below) Install the SafeString library (V3+) from the Arduino Library
Manager…... Listed under: Other Projects

192. Photoresistor Arduino Midi Theremin

I call it the C041D-2020 I made this during the second COVID lockdown in UK, from ideas borrowed from about 5 other
projects I found here on Instructables and also on Youtube. As you can see from the video it makes acidy noises by covering the…... Listed under: Security –
Safety Projects

193. Adafruit Flora NeoPixel LED Ring Headphone mod

Wearable Arduino mod for your headphones. Non-invasive procedure for headphones that don't have room
inside the drivers or you don't want to hack apart your high end cans. Adafruit just put out a tutorial for adding pattern blinking LED lights to headphones.  This
instructable takes it…... Listed under: Sound – Audio Projects

194. How to Create an Animatronic Dragon Model

ROOAAARR!! Before you learn how to train your dragon, you need to first obtain a dragon, and there's no better
way than to make it yourself! This guide will explain the steps I took to create a scale model animatronic dragon, and in doing so…... Listed under: Other Projects

195. Candy Tossin Coffin using an Arduino

When you flip a switch, the coffin lid opens and a smiling red eyed ghost arises. The ghost flings some candy, pushes the
switch back and returns to rest. Then, the coffin lid closes. Step 1: Major parts include: 4.5 rpm motor  #155821 Jameco.com 1.8…... Listed under: Game –
Entertainment Projects, LED Projects, Projects

196. The BookMinder: a Bookend Meeting Countdown Device

Since more and more of us are working from home, we are all increasing our engagement with our
screens (looking at you, Zoom meetings). For myself, when I am taking a break from my computer screen I end up doing other things in my apartment…... Listed
under: Other Projects

197. Arduino Controlled Solar Fountain

A fountain can make a nice decorative fixture for your garden. But it isn't always easy to run a power cord out to where you
want it. So I decided to run it on solar power. The system is controlled by an Arduino. This allows…... Listed under: Solar energy projects

198. DIY RGB Tube Lights

DIY RGB Tube light is a multi functional tube light which can be used in photography, light painting photography, film making, gaming, as a
VU meter and more. The tube light can be controlled by Prismatik software or by a push button. These tub lights…... Listed under: How To – DIY – Projects

199. Arduino HVAC Servo Thermostat or Controller

Welcome to my 'green' instructable! I am going to show you how to use an Arduino, two servo motors a
temperature sensor and some metal (or wood) to make a digital thermostat for a through-wall HVAC unit. According to CB Richard Ellis (a major real…... Listed
under: Arduino Motor Project Ideas, Ideas

200. Arduino Photocell Theremin Synth (glitchamin)

You know theremins, right?  Those cool-looking boxes with antennae that produce noise without being touched? 
They are played by the likes of Jimmy Page of Led Zeppelin, and present in the soundtracks of countless films.  Well, with this instructable, I will show you how
to…... Listed under: Solar energy projects

201. The Youtube Subscriber Counter

Hey! Today i'm gonna share with you one of my lastest quarantine projects, i'm talking about this awesome NodeMCU based
Youtube Subscriber and View counter! It's a pretty simple project that can be done in an hour or less so let's get started! Supplies NodeMCULCD 16x2 with…...
Listed under: Other Projects

202. Teclado MIDI Super Simple – Super Simple MIDI Keyboard

Este tutorial te lleva paso a paso por la construcción de un teclado MIDI de una octava, programable
via arduino gracias a su conector de 6 pines. Vas a necesitar: Componentes: 1 Atmega328p con el bootloader de Arduino 1 Zócalo de 28 patas 1 Cristal…...
Listed under: Sound – Audio Projects

203. Arduino Music and Game Box

https://youtu.be/HSzkWiln1L0 This project was a special gift to my son Eyal, for the birth of his younger brother Itamar. It basically
lets you play four games: Simon gameReaction time gameFree play (baby-mode)Music mode - plays the Super Mario brothers, by Reyboz (Thanks!) The
hardware was heavily influenced…... Listed under: Game – Entertainment Projects

204. AIR Project using an Arduino

CODE: download final project code: Arduino Code download additional wiring_analog.c code: Wiring Code download processing
code: Processing Code download C code: C CODE FILE EXPLANATION: The final project code is the final arduino code for the project. The wiring_analog.c code
should ONLY be used for…... Listed under: GPS Based Projects, Projects

205. Gimbal Stabilizer Project

How to Make a Gimbal Learn how to make a 2-axis gimbal for your action camera In today’s culture we all love recording video and
capturing the moments, especially when you are a content creator like me, you sure have faced the issue of such…... Listed under: Video – Camera – Imaging
Projects


206. Arduino-Pneumatic Flight Simulator
Hello, my name is Dominick Lee. I am a senior in high school who is also a programmer and inventor. I created the 
"LifeBeam Flight Simulator" (name of my project) because I wanted to challenge myself and utilize my software and hardware skills. I was…... Listed under:
Game – Entertainment Projects, Robotics – Automation Projects

207. Arduino PIR motion water gun

first what youll notice my grammer isnt the best 🙂 ok what youll need: 1 transister/mosfet that can handle the current for the
water gun motor, this is the one i used - http://www.sparkfun.com/products/10213   -   then a diode, i used this one 
-  http://www.sparkfun.com/products/8589   - then a 10k ohm resistor,…... Listed under: Game – Entertainment Projects, Projects

208. 3d Maze Game Using Arduino

Hello friends , so today we are going to make a maze game using ARDUINO UNO. As Arduino Uno is the mostly used board it is
very cool to make games with it. In this Instructable lets make the maze game which is controlled using…... Listed under: Game – Entertainment Projects

209. Pee to Check-In to Foursquare – Mark Your Territory using Arduino

In case you are unfamiliar with the most amazing new way to physically "check in" to
foursquare here is a video that will explain it all: Mark Your Territory is a fully open-source system but because it interacts with the physical world as well as…...
Listed under: Projects, Sensor – Transducer – Detector Projects

210. Mini invisible MIDI Harp

English: This is a simple and easy to make MIDI harp, it runs on an Arduino UNO and uses infrared sensors as strings. It communicates
with every recording software that has MIDI. Its really fun to play with and also very cheap, so enjoy!! Español:…... Listed under: Sound – Audio Projects

211. CO2 Display

As its name suggests, the CO2 Display project is a small CO2 gas sensor to be plugged into USB to easily track indoor and outdoor pollution.The
CO2 level is displayed live, but it is possible with the small application provided in the documentation to generate…... Listed under: Sensor – Transducer –
Detector Projects

212. How to Make a Balancing Board System for Hip’s Muscles Exercise (BalanX)
After many happy years as a runner, two years ago I had a problem with my right
hip. Unfortunately I had to undergo to total hip replacement surgery. After the operation I made a period of rehabilitation in the use of the leg muscles,
through…... Listed under: Development Board – Kits Projects

213. Arduino Electromagnetic Field Detector

A while back I saw an EMF (Electromagnetic Field) Detector at makezine.com that used a led bargraph. I decided to
modify it to use a 7-Segment LED Display! Here's my project. Sorry I don't have any pictures of it in use. Hopefully I can post…... Listed under: Projects, Sensor –
Transducer – Detector Projects

214. Arduino Time-Lapse Controller

This project originally started out with a few simple parts thrown together to create a very simple time-lapse controller for a
DSLR camera. After I was happy with the initial prototype, I wanted to make a final version which the programming of the "lapse time"…... Listed under: Video –
Camera – Imaging Projects

215. Using Ninjutsu Hand Signs (Naruto) to Unlock a Safe

https://youtu.be/z772hGGNcqg Naruto is a Japanese manga series written and illustrated by Masashi
Kishimoto.It tells the story of Naruto Uzumaki, a young ninja who seeks recognition from his peers and dreams of becoming the Hokage, the leader of his
village. One of the most important parts…... Listed under: Security – Safety Projects

216. Arduino Controlled LEGO RC Tank and Transmitter

I recently got my childhood Lego out and wanted to find a project that I could combine with Arduino and
mechatronics. I started off building a digger but then realised a tank would be better because, well tanks are cool!I originally built it to be…... Listed under: Other
Projects

217. Think-a-Tron Mini

This Instructable is a standalone follow on to my recent Think-a-Tron 2020 project. You can see a picture of my Think-a-Tron "family" including
the original, 2020, and Mini versions above. For the background on what Think-a-Tron is and what I tried to accomplish with Think-a-Tron…... Listed under: Other
Projects

218. Self Balancing Unicycle

Following the popularity of our self balancing scooter and the SciChair we decided to try something a little edgier, the Self Balancing
Unicycle. This project reuses a lot of stuff from our previous projects, using an arduino as the brains behind the scenes. Step 1:…... Listed under: Game –
Entertainment Projects, Motor Projects

219. Make a Motorised Pan and Rotate Camera Slider

Supplies The parts list for this build is quite lengthy, but a lot of these components you may having lying
around if you do have an old 3D printer. The 3D printer I've used to print some of the plastic components and housings is a Creality…... Listed under: Video –
Camera – Imaging Projects 
220. My Arduino Ping Display Robot
Goals Hello all. I hope to please share a little robot that I have just finished building. There are many Ping Boat, perhaps with a
tutorials and display less so without pretension, will illustrate what I could do. I gave myself the goal of realizing…... Listed under: LCD Projects, Projects,
Robotics – Automation Projects

221. A Gentle Introduction to Arduino for Scratch Users

There are lots of people who are very comfortable with the Scratch programming environment but want to
try something with Arduino to Blink Lights, Sense Buttons, Run Servos or whatever. They may find the C programming environment in Arduino IDE - Sketch, a bit
too…... Listed under: Other Projects

222. Easy Zoom Quit Button

This Zoom emergency quit button lets you exit out of your meeting in an instant. It is simple to make and requires very little electronics
experience. I built this because I was always searching around for the quit button on the bottom of the screen…... Listed under: Other Projects

223. Arduino-controlled RGB LED Infinity Mirror

Update 11/22/2013: Thanks to everyone who voted for this project in theMicrocontroller Contest! It was one of three
first-prize winners. Update 9/17/2013: Thanks to everyone who voted for this project in the Arduino contest (I was one of ten "second prize" winners)! If you
want to try…... Listed under: LED Projects

224. How to Build Your Own DigiDice | Electronic LED Dice

https://youtu.be/urZDkpSwVQo Here is an Instructable on how to build a digital dice that uses LEDs as
well as an Arduino Nano to generate random numbers and display them in vibrant colours. The housing is fully 3D printed and some circuits have to be custom
made.…... Listed under: LED Projects

225. Visual Network Threat Level Indicator v2 using Arduino

By popular request this is a new wireless version of the Visual Network Threat Level Indicator. This uses
a Roving Networks WiFly RN-XV Module to do 802.11 WiFi along with an Arduino to display the threat level on your network. Network monitoring is very
important in todays…... Listed under: Internet – Ethernet – LAN Projects, Projects

226. Create a Choice-based Text Adventure Game With Tinkercad Circuits

One of my fondest childhood memories is visiting my grandparent's house and reading my
uncle's old collection of "Choose Your Own Adventure" books. While I always got stuck playing text-based computer adventure games with finnicky commands, I
was hooked to the simplicity and variety of…... Listed under: Game – Entertainment Projects

227. A cardboard televisor (with arduino and LEDs)

Recently I saw a documentary about the history of the television.  And to my surprise they showed that there
existed a mechanical television before the well known CRT televisions. Those mechanical televisions or televisors were pretty smart and simple. A CRT is simply
an electron beam that…... Listed under: LED Projects

228. Disney Magic Band Scanner

This is a Magic Band Scanner. It is inspired by the Magic Band Scanners that can be found at Walt Disney World. It is used at the
entrances to all the parks and rides with the FastPass system. I designed and built this as a…... Listed under: Other Projects

229. Arduino Target Practice

A quick demo video for your pleasure. This is an instructable for a target practice system for airsoft and nerf weapons. The system has been designed to
test a shooter’s reaction times and accuracy. Sam and I have been meaning to do this project for a…... Listed under: Game – Entertainment Projects, Projects

230. Laziness Monitor

Build an affordable monitoring setup!This project will help you easily get indications on how much time your are sitting in the couch watching
TV. This project will have time intervals in which you will get light indications from the board after X time has passed,…... Listed under: LCD Projects

231. Make your own Custom Electronic Widgets, like my Arduino LED Day/Night Widget
This is just a brief run down on how easy it has become to make your own
circuits complete with your own PCB's.  Have you ever wanted to make something custom that suits your needs? Of course you have!! For me it really started
when…... Listed under: LED Projects

232. Virtual Color Mixer using Arduino

This example demonstrates how to send multiple values from the Arduino board to the computer. The readings from three
potentiometers are used to set the red, green, and blue components of the background color of a Processing sketch or Max/MSP patch. Software Required
Processing or Max/MSP…... Listed under: How To – DIY – Projects, Projects

233. Daft Punk LIVES ON! My Guy Manuel Helmet

WHAAAAT??? DAFT PUNK CALLED IT QUITS ??? Daft Punk may have retired but that doesn't have to mean that you
have to stop having fun with their inspiration! Here is my second dedicated project to that musical duo. This project was pretty tough to pull…... Listed under:
Other Projects

234. Happy Birthday Song Using Arduino Uno

Hello friends welcome back to "Techno-E-solution" in todays article I'll show "How to play Happy Birthday Song Using
Arduino & Buzzer" in few steps. Most of the peoples are from technical background so I decide to wish that peoples means my besties in techy style…... Listed
under: Other Projects

235. Led Slot Machine Costume using Arduino

This Instructable will walk you through my process of making a Slot Machine costume with addressable leds controlled
with an arduino!   Step 2: Lets Get started Picture set up: I found my slot picture online that the best graphic that when enlarged would stay…... Listed under:
Arduino LED Project Ideas, Game – Entertainment Project Ideas, Ideas

236. Arduino Keyboard Message Code
When the button is pressed in this example, a text string is sent to the computer as keyboard input. The string reports the
number of times the button has been pressed. Once you have the Leonardo programmed and wired up, open up your favourite text…... Listed under:
Interfacing(USB – RS232 – I2c -ISP) Projects, Projects

237. IR Calculator
Hey, welcome to my first instructable where I will be helping you create a calculator. It's basically made up of a 16x2 LCD, with an Arduino UNO that
you can use in order to make quick calculations from far distances. I know, it doesn't make…... Listed under: Calculator Projects

238. Color Injection Lamp – Jumbo Size

I love this concept very much because kids like it very much. Now a days kids are always in mobile for study then for play and
then for entertainment. Already i develop few projects with lights with arduino and Android. When i see through net…... Listed under: Other Projects

239. Visual Computer Stress Meter using an Arduino

Have you ever wanted to, without going out of your way to clock your processor, see how much stress your
computer is under? With this project you will have a simple bar graph that constantly shows how much stress your computer is under. If the…... Listed under:
Metering – Instrument Projects, Projects, RTOS – OS Projects

240. F1 – Rider
F1(Formula One) Rider is a low-budget car. Aspiring people with inspiring speeds. The Rush of excitement is pressing accelerate. A fast Requires a
sharp mind. Some cars are meant to fuel our passion. Better Ride is an outcome of a better ride. No hour feels…... Listed under: Car Projects

241. Bluetooth Weather Lamp

This was a 2 hour project I whipped up in order to learn how to use a new Bluetooth LE 4.0 module I picked up at redbearlab.com,
called a BLE Mini. I've since thought of several much simpler ways (and more dependable) to accomplish the…... Listed under: Interfacing(USB – RS232 – I2c -ISP)
Project Ideas, LED Projects

242. LED Fader – With or Without Arduino

Have an awesome project in mind using some LEDs. In that project I will be using some LED Fading Effect and few LED Chaser Circu
before jumping onto that, I thought I should create a short tutorial and show you guys how to fade…... Listed under: LED Projects

243. Necomimi Arduino Cat Ears

They are so dang cute. If you have ever seen the cool promo for the Necomimi Neurowear wearable set of cat ears that respond to
brainwaves, you would want a set too. But it seems they may be vaporware since it hasn't materialized on the…... Listed under: Game – Entertainment Project
Ideas, Ideas

244. Measuring Refrigerant Gases Sound Speed Using Arduino and App Inventor 2
The purpose of this Instructable is to build a portable device that can measure the
speed of sound in refrigerant gases and use this data to identify them. The speed of sound in an ideal gas is related to two characteristics of the gaseous
substance, its molecular…... Listed under: Sound – Audio Projects

245. DIY Arduino Unit Converter: How to use LCD

Step 1: Ingredients: Electronics Arduino Breadboard LCD* 2x 50k pots 150 ohm resistor Jumper wires, and tons of
them! If you do not want to use a LCD then you will have to use serial monitor. Wherever you see lcd.print just change it to Serial.print.…... Listed under: How To
– DIY – Projects, LCD Projects

246. CHR’s 8X8X8 LED Cube – Revisited with improvements!

SEE STEP 11 for uploadable code for this cube. This instructable has mutated over the past few months,
and you'll see a bunch of end results before we get into how to make the cube, and the improvements that have been made over the original…... Listed under:
LED Projects

247. Parking Assistant Arduino Project

Do you ever get frustrated trying to park in just the right spot? Have you gotten tired of using a tennis ball as a guide? Is it time
for something a little smarter? Now you can upgrade your garage with an Ultrasonic smart parking assistant…... Listed under: Arduino LED Project Ideas

248. Eggbot
https://youtu.be/hdoy4-F4xgI Rafael Fuentes, Carmen María Fuentes and Carmen Pérez decided to create this project that was submitted to 'Creative
Electronics', a Beng Electronics Engineering module at University of Málaga, School of Telecommunications. The project consists of making an eggbot using an
Arduino Uno development board. This…... Listed under: CNC Machines Projects, Motor Projects

249. Arduino 4 led madness

In this instructables you will learn how to wire 4 LED'S and make them flash 10 times. This is a great Starter project!! what you will need...
1: arduino (I am using an Duemilanove) 1: breadboard 4: LED's 10-15: jumper wires 3: resistors Step 1:…... Listed under: LED Projects

250. Fading using an Arduino

Demonstrates the use of analog output (Pulse Width Modulation (PWM)) to fade an LED. PWM is a technique for getting an analog-like
behavior from a digital output by switching it off and on very fast. Circuit An LED connected to digital output pin 9 through…... Listed under: LED Projects,
Projects, PWM Projects

251. Creative Noise Semaphore

This project was submitted to 'Creative Electronics', a Beng Electronics Engineering module at University of Málaga, School of
Telecommunications (https://www.uma.es/etsi-de-telecomunicacion/). It's a modification based on sound level meters that are already marketed for use in 
classes to measure ambient noise. The project is developed in…... Listed under: Sound – Audio Projects
252. Pressure Activated Light-Up Umbrella using an Arduino
Once upon a time, 2 girls greatly enjoyed walking in the rain with umbrellas. They decided the
enjoyment of this experience could be maximized by building their own pressure-activated web of LEDs to install under their umbrella. Thus, with the help of an
Arduino, some…... Listed under: Home Automation Projects, Projects

253. TankWars: A Physical Video Game using Arduino

This instructable will show the game TankWars, a web based game played on an iPad that drives a real robot
tank to fire lasers at a robot. When you hit the robot target, the game is updated. The tank and the target are Arduino's equipped…... Listed under: Game –
Entertainment Projects, Projects, Robotics – Automation Projects

254. Arduino Voice Controlled Robot

Over the years as technology advanced and grew at a tremendous pace, so did the horizon of ideas and creation in our mind. If
we look a few years back, a teenager like me would dare think about creating a robot that would operate listening…... Listed under: Robotics – Automation
Projects

255. Mario 64 Cake Timing Light Game

https://youtu.be/nFIlqSWAj8E Welcome to my Mario 64 Cake Carnival Timing Game! The cake is modeled after the end screen
in Mario 64. The active light moves around the cake in a circle. The goal of the game is to stop the light on the star by…... Listed under: Clock – Timer Projects,
Game – Entertainment Projects

256. ATtiny programming with Arduino

After this Instructable you should be able to program an A Ttiny85/45 with an arduino. It may sound complex but it really isn't. After doing
some research I could not find to much info on how this could be done. I however did find http://www.instructables.com/id/Program-an-ATtiny-with-Arduino/.
This Instructable…... Listed under: Arduino Programmer Projects

257. Arduino Fixed-point Vehicle Proximity Detector

This is the high-tech version of hanging a tennis ball from the ceiling from a piece of string.  Of course, if you
have two different types of vehicles, that tennis ball isn't going to land in the same place on both of them.  This project…... Listed under: Arduino Car Project
Ideas, Ideas, Sensor – Transducer – Detector Project Ideas

258. Real VO2Max–Measure Your Athletic Potential

VO2Max is an interesting concept that proposes that there is a natural limited ability to extract Oxygen nutrient
out of the air and consume it. It is like the IQ of sports activities--some algorithm that tells you how gifted you are in doing a variety…... Listed under:
Temperature Measurement Projects

259. Electronic Dartboard or How I Learned to Stop Worrying and Love ECE 476
Introduction Ever dream of having a darts game scored automatically without using
those annoying plastic darts?  We decided it was a dream most of us has had at some point, and so decided to implement an automatic scoring system for a
“real” cork dartboard. As…... Listed under: Game – Entertainment Projects

260. 88888: the Electronic Smile Counter

This project originated from a request of a friend. He asked me to build a so-called smile counter for their college dorm - a
segmented display which can show a number. This number must increment every time someone pushed a button and should be memorized…... Listed under:
Other Projects

261. Arduino 7-Segment Thermometer

Using a dual 7-segment display, a DS18B20 temperature sensor and a couple of shift registers I figured that I could build a
digital thermometer. Step 1: Temperature Sensor The sensor I'm using is the DS18B20, it's a 3pin sensor that just requires a single input…... Listed under:
Projects, Temperature Measurement Projects

262. PlayPlace Lighting Using NeoPixels

With 2020 being the year of COVID, having a toddler that was stuck at home (especially during the winter) presented the
need for, well, stuff to do. So, my wife and I decided to turn our basement into a play place for our little girl.…... Listed under: Other Projects

263. Arduino String Comparison Operators Code

The String comparison operators, ==, !=,>, < ,>=, <= , and the functionsequals() and equalsIgoreCase() allow you to
make alphabetic comparisons between Strings. They're useful for sorting and alphabetizing, among other things. The operator == and the function equals()
perform identically. It's just a matter…... Listed under: How To – DIY – Projects, Projects

264. Voice Loudness Monitor (Arduino)

In this pandemic it is important to take reasonable measures to reduce spreading viruses. A paper from 2019 found that
louder voices spread more viruses (https://www.nature.com/articles/s41598-019-38808-z) [Asadi et al. 2019]. This simple project aims to remind people to not
shout unnecessarily. This can be used…... Listed under: Sound – Audio Projects

265. USB Freeform using an Arduino

This is a project in attempting to improve it predecessor "Freeform Arduino" by putting it in an enclosure and having it serve the
similar purposes as "Palm Arduino Kit" and "Palm Arduino II" which I can carry it in my pocket and be available to…... Listed under: Interfacing(USB – RS232 – I2c
-ISP) Projects, Projects

266. Smart Desk LED Light | Smart Lighting W/ Arduino | Neopixels Workspace
Now a days we are spending a lot of time at home, studying and working virtualy, so
why not to make our workspace greater with a custom and smart lighting system Arduino and Ws2812b LEDs based. Here I show you how build your Smart
Desk…... Listed under: Other Projects

267. Mechanical 7 Segment Display V2

Hello and welcome back to another Instructable. In the previous two Instructables, I have shown you how I created PCB coils
in Kicad using a Python script, covered the basics of an H bridge, and showed you how I will be using them to control…... Listed under: Other Projects

268. Extending GPIOs of ESP8266-01 and IoT || Exploring ESP8266:Part 3

Hello all! This instructable happens to be part 3 of my ESP series where I continue to

experiment and explore the various features of the ESP 8266-01 board. In the first and second part of the series I have mentioned the wonderful capability of
this…... Listed under: Other Projects
269. Floating and Spinning Earth Globe
The objectives of this project were (1) to make an object float, by means of magnetic levitation and controlled by an Arduino
Nano and (2) documenting the whole process allowing other people to build one on their own. There were some requirements, too. First, I…... Listed under:
Other Projects

270. soundie: a musical touch-sensitive light-up hoodie using Arduino

This tutorial will show you how to create a garment that changes its behavior depending on how conduc
are. It detects conductivity through iron-on conductive fabric that we will use, and it will light up and sing different notes depending on how you touch…... Listed
under: Game – Entertainment Project Ideas, How To – DIY – Project Ideas, Ideas

271. Arduino Board Sound Alarm

I’ve just completed my second Arduino project, a sound level detector which sets off an “alarm” when there’s the sound level is to
high for too long.  I built it for use in a school that wants to provide visual feedback to students when they…... Listed under: Projects, Security – Safety Projects

272. Teamaker 2.0

What's better in the morning than a hot cup of tea?You should keep to the brewing time so that the tea tastes the way you want it to.
Unfortunately, there's always a lot to do and the timer beeps when you're somewhere else. So we…... Listed under: Other Projects

273. Visual Network Threat Level Indicator using Arduino

Network monitoring is very important in todays world. The internet is a scary place. People have taken
steps to raise their awareness by installing Intrusion Detection Systems(IDS) such as SNORT. The problem with most of these systems is that upon first installing
them they are…... Listed under: Ideas, Internet – Ethernet – LAN Project Ideas

274. Wilson – the IoT Hat

Hi There, Recently, I finished up on my DIY project Wilson: the IoT hat. Because of the big fun I had creating and using this IoT hat, and given
the wonderful feedback it provided to the wearer, I really want to share this project with…... Listed under: Other Projects

275. Flicker up to 6 LEDs with Arduino

Hi there. Christmas is coming closer, and I was wondering if I could put some candles in my room to get in the "christmas
mood". But after a friends house burned down of christmas tree candles, I don't want to burn real candles into my…... Listed under: LED Projects, Projects

276. Displaying Images on 4D OLEDS using Arduino

4D Systems makes some really nice serial OLEDS. They aren't hard to use, but the documentation for them is
very scattered. This tutorial pulls together the various pieces i've found so that you can get up and running very quickly. Start by skimming through the…...
Listed under: Video – Camera – Imaging Projects

277. ARDUINO AIRGUN CHRONOGRAPH

This is a chrono for measuring the speed and energy of an air rifle pellet. It's pretty fast and could probably be used for
other types of gun, (airsoft , full bore etc) but I have not tested it on them. I initially made this…... Listed under: Temperature Measurement Projects

278. Program your Arduino with an Android device

Hi, in this Instructable I want to show you, how you can program your Arduino with your Android device. It is very
simple and cheap. Also it allows us to program our Arduino where ever we want, this is usefull for permanently installed Arduino boards,…... Listed under:
Arduino Android, Electronics News Updates

279. Deej – a Physical Volume Mixer

Meet deej! deej is a physical voulume mixer. Just like the volume mixer built into windows, just physical! This means that you can
change the volume of an application without closing your important game. You can turn the game volume down and Discord volume up,…... Listed under:
Sound – Audio Projects

280. Arduino stoplight web server

At the place I work, we use xymon to monitor of our servers. All of the services monitored are important, but we wanted a
separate indicator to simply show the overall health of the most critical systems. Furthermore, we came up with the following criteria:…... Listed under: Internet
– Ethernet – LAN Projects, Projects

281. Power off from an Arduino Sketch using the Pololu Power Switch
If you need an Arduino to shut off from within your Sketch, this is the solution. We will explore
wiring the Pololu Pushbutton Power Switch, programming the Arduino to shut off the power, and making the unit "power on" only. The Pololu Pushbutton
Power Switch…... Listed under: Interfacing(USB – RS232 – I2c -ISP) Projects

282. Bounce Back!

Responsive Pneumatic Envelop (A useless machine) Mockingly inspired by the blowfish, Bounce Back builds on state of the art bubble wrap
shipping envelops by only inflating its bubbles when frightened by rough handling. Inversely, when the package is not being shuck, it will not inflate…... Listed
under: Other Projects

283. How to Make CLAP Control Car || Using Arduino Uno

Hey Guys, welcome to my first instructables article. So guys today we are going to make a " Clap Control Car With A
seems to be interesting Right? Let me first tell you about the main working principle of this robot: This car uses a…... Listed under: Car Projects

284. Wireless nunchuk controlled animatronic doll using Arduino

This instructable will attempt to show you how to make an animatronic doll controlled by a wireless

nunchuk. This doll can only move its head though. I'm sure there are plenty of people out there who can take this and expand on it and make…... Listed under:
Game – Entertainment Projects, Internet – Ethernet – LAN Projects, Projects
285. Arduino & TFT Screen Volume Mixer
Before i start this AMAZING tutorial on how to build a physical windows volume mixer, i want to apologize for my bad
written English. Now, let's get started. For this project I would like to build a sound mixer, but with a tft screen so i can…... Listed under: Sound – Audio Projects

286. Automatic Opening Garbage Can Cabinet

https://youtu.be/RrtcjfrJk7I Sometimes you need to throw something away, but your hands are either full of garbage,
or they're contaminated with raw chicken or meat. I was able to make this automatic opening garbage bin with an Arduino Uno, and some supplies from
Amazon, Ace Hardware…... Listed under: Other Projects

287. Digital Read Serial using Arduino

This example shows you how to monitor the state of a switch by establishing serial communication between your Arduino and
your computer over USB. Hardware Required Arduino Board A momentary switch, button, or toggle switch 10k ohm resistor breadboard hook-up wire Circuit
image developed using Fritzing. For more…... Listed under: Interfacing(USB – RS232 – I2c -ISP) Projects, Projects

288. Arduino Esplora Joystick Mouse

This sketch shows you how to read information from the Esplora's joystick and use it to control the movement of the cursor on
your computer. You're making your Esplora into a mouse! This sketch will take over the mouse movement of your computer. If you…... Listed under: Game –
Entertainment Projects, Projects

289. Build a Robot That Creates Art

In this project I'm showing you how I made my own art robot. The whole concept is to illustrate how we as humans can work
together and collaborate with machines and robots to create something new. Both the art style and ethos of the project…... Listed under: Robotics – Automation
Projects

290. Arduino IoT Cloud ESP8266 NodeMCU Alexa Home Automation System | IoT 2021
In this IoT project, I have shown how to make an IoT-based Smart Home
with Arduino IoT Cloud & Alexa using NodeMCU ESP8266 to control 4 home appliances with voice commands. If the internet is not available, then you can
control the home appliances manually with switches. During the article, I have…... Listed under: Other Projects

291. Flux Capacitor PCB Badge

Hey Everyone what's up! https://youtu.be/efD6QN1S20o So this is my "FLUX Capacitor" PCB Badge which is a replica of the actual Flux
Capacitor which was in back to the future movie. The Flux Capacitor was the core component of Dr. Emmett Brown's time-traveling DeLorean time machine…...
Listed under: Other Projects

292. Arduino Tic Tac Toe Shield With an AI Opponent

In this Instructable, we're going to be making a Tic Tac Toe or Noughts and Crosses shield for an Arduino that
allows you to play against another person or an AI player running on the Arduino. The game board is made up of a 3x3…... Listed under: How To – DIY – Project
Ideas

293. Homemade CNC Machine From DC Servo Motors and Wooden Wine Boxes
Today, I would like to share how to build a 3 axis CNC machine at home using
available or discarded materials. Specifically in this project, I reused 2 old DC servo motors and 2 wooden wine boxes, as well as, taking advantage of my
daughter's…... Listed under: CNC Machines Projects

294. Differential Thermal Analysis Using Arduino and PhyPhox

When a solid substance is heated the increase in energy manifests itself in the form of an increase in
temperature. If the heating rate is constant the temperature increase is also constant as long as there is no change in the structure of the substance.…... Listed
under: Other Projects

295. Plant Bartender

https://youtu.be/xV2tXc584_A This project was completed by Alexandra Pittiglio & Christelle Feghali for our Computational Design and Digital
Fabrication 'Useless Machine' Project, Semester 2, ITECH M.Sc Programme -------- We present Plant Bartender, a 2-axis robot that senses and waters in the most
inefficient way. This device…... Listed under: Other Projects

296. ATtiny85 – Spectrum Analyzer on RGB Led Matrix 16×20

Continuing with ATtiny85, today I'd like to share how to build a music spectrum analyzer on 16x20 RGB
led matrix. The music signal FFT transformation and LED Bit Angle Modulation are all carried out by one DigiSpark ATtiny85. Please watch my video below:
https://youtu.be/257Ma3YemKs Step 1:…... Listed under: LED Projects

297. Metroid Morph Ball

https://youtu.be/q6j_CxbCovE If you are like me, there are many nostalgic things that bring me back to my youth. Tom Sutton, username
yakis on thingiverse, created this 3d model of Metroid’s Samus in morph ball form. It has room inside for LEDs to light it up.…... Listed under: Other Projects

298. Hookup an LCD to an Arduino

Adding an LCD display to Arduino projects can add real value but the cost of doing so can be significant. Not a financial cost - you
can pick up 16 (characters) x 2 (rows) LCD for as little as £3.50. The cost is the pin…... Listed under: Interfacing(USB – RS232 – I2c -ISP) Projects, LCD Projects,
Projects

299. The Flight Millennium Controller

I realized a PCB remote control in order to control remote controlled objects and more particularly an airplane. This one works
in wifi 2.4Ghz, has an Oled screen, joysticks, potentiometers, buttons/switches and a pipe to select the device to control. I made a form of…... Listed under:
Other Projects


300. LED Chaser Circuits Using IC4017 and Arduino
https://youtu.be/F6V1AjESWbU A Chaser Circuit consists of a clocked IC or other electronic unit like an Arduino that drives an array
of LEDs in such a way that individual LEDs (or small groups of LEDs) turn on and off in a predetermined and repeating sequence, thus…... Listed under: LED Projects
301. Wind Speed Monitor Via MQTT
Once I failed to control the drone because of the wind so I want to measure the wind speed to know whether it is suitable for the
drone flight in the wild. So I am thinking of how to measure the wind speed in the…... Listed under: Other Projects

302. Life and Tetris and Pong…Oh My!

Several months ago I got a really good deal on a large 32x32 RGB LED matrix display. It matches up with the wiring interface
shown on the Adafruit website for their 32x32 display so I did the usual testing with their libraries. Recently I was…... Listed under: Other Projects

303. The Tetris Pumpkin using an Arduino

Who wants grinning faces and candles when you can have an interactive pumpkin this Halloween? Play your favorite
block-stacking game on an 8x16 grid carved into the face of the gourd, lit by LEDs and using the stem as a controller. This is a moderately…... Listed under:
Game – Entertainment Projects, Home Automation Projects, Projects

304. Switch Statement used with serial input using Arduino

An if statement allows you to choose between two discrete options, TRUE or FALSE. When there are more
than two options, you can use multiple if statements, or you can use the switch statement. Switch allows you to choose between several discrete options. This
tutorial shows you…... Listed under: How To – DIY – Projects, Projects

305. LED Hour Glass

In this article I describe how we made an hour glass with leds as the sand. We were always interested in making something that visually flows
like sand and decided to use an hour glass to start. The movement is not completely fluid given the…... Listed under: LED Projects

306. Touch Sticky Note using Arduino

This piano-liked thing is what I called touch sticky note. I Use a piece of sponge as the paper, and put 8 x 8 LEDs under the
sponge. Whenever I touch the touch screen, the related LED will turn on, and this is how I…... Listed under: Ideas, Sensor – Transducer – Detector Project Ideas

307. BLE & LoRa Based Indoor Location Tracker Without GPS
Hey, what's up, Guys! Akarsh here from CETech. GPS-based location tracking is one of the very
important services nowadays. We use this to find a path to our destination and also track the position of our goods using this. But have you ever heard of
location…... Listed under: GPS Based Projects

308. A laundry alarm for the hearing impaired and everyone else using Arduino
This Arduino based project was designed to solve a recurring problem for my hearing
impaired wife. Our laundry room is located remotely from our living area.  If our laundry has finished washing and is not removed in time, it can sour or even
get moldy.  …... Listed under: Home Automation Project Ideas, Projects, Security – Safety Projects

309. Automatic Irrigation System (Arduino) With Usb Type DC Submersible Water Pump
This mini project is involved to use Arduino to control submersible watre
pump when soil reach below or above predefined moisture level. How it works ❓ 1. Soil moisture sensor is reading analog signal which transmit to Arduino. 2.
Arduino control submersible water pump ON…... Listed under: Interfacing(USB – RS232 – I2c -ISP) Projects

310. Android & Arduino Controlled Projector Screen

This is my first time using Arduino, or any microcontroller. I'm glad it worked out so well but my wife may not be, due to the
stacks of microcontrollers that will being showing up on our doorstep soon for future projects. Any feedback or questions…... Listed under: Arduino Android, Projects

311. Mini-TV Weather Station With the ESP32!!

Hello everyone, today I'm going to show you how I built a Mini-TV weather station with Open Weather Map and the
ESP32! Background and Troubleshooting I'm not kidding when I say the inspiration for this project came from boredom! I had been working on the same
project…... Listed under: LCD Projects

312. Freeform Arduino

As an artist, sometime I created an art pieces without planning ahead what I want to draw or paint, just want to add colors or lines onto the
drawing or canvas, and never think of the outcome of the piece. Let's our own instinct and subconscious leading…... Listed under: LED Projects, Projects

313. L.O.G. sous vide

So have you heard of sous vide? Well, this Lazy Old Geek (LOG) hasn’t or hadn’t. http://en.wikipedia.org/wiki/Sous-vide It’s French. So it’s kind of
like boil-in-a-bag only you don’t boil it. The equipment can be rather expensive.
http://www.sousvidesupreme.com/Shop_Online/SousVide_Supreme_Demi/Department.aspx?DeptID=3&&AdID=245&gclid=CN7PyM6uw7cCFWNp7AodomkA6g
I thought that was rather expensive for a…... Listed under: Home Automation Projects

314. ARC Reactor Lamp MKII

Welcome to this instructable, this time I will be showing you how to make the newest version of my ARC Reactor Mood lamp I did a
couple of months ago. This time it won't be a mood lamp, but a lamp that changes depending on…... Listed under: Other Projects

315. SEE-THROUGH LED MATRIX WITH WASHERS

I do project related works. After the structure contractors finished their building works, they threw away a lot of
washers and nuts M10. During I did cleaning, I picked them up to make this decorative see-through led project. It can be viewed from frontside or…... Listed
under: LED Projects


316. Energy-Saving Light using an Arduino
In the spirit of Earth Day, I have created a revolutionary new energy-saving lighting solution that is only ever on when your eyes are open.
This is remarkably more efficient than normal lighting that remains on, even when your eyes are shut. Using my device, you…... Listed under: Home Automation Projects, Projects
317. Make your own custom Arduino compatible
I love Ardunio. I love the things that people make with them and I love to make my own. Last August I published an
Instructable on how to make your own postage stamp sized Arduino compatible. This Instructable will show you how to to make a…... Listed under: How To –
DIY – Projects, Projects

318. Gesture Controlled Interactive Desk Light

https://youtu.be/4BFWbc2f39I We all have seen different kinds of mood lamps & RGB light, most of them have some
buttons or a remote to interact with them, but we thought of making a Gesture Controlled RGB Desk Lights which can change its colour only using a simple
swipe…... Listed under: Sensor – Transducer – Detector Projects

319. Program ESP8266 With NodeMCU

Hey everyone what's up! so you got yourself an esp12f module and now you want to program it? here's how you can do that
in an easy way that doesn't involve that complex FTDI module with the button's method. so the easy way is to…... Listed under: Arduino Programmer Projects

320. Arduino Timing Belt Calculator (console)

This command-line Python script is a utility to help calculate parameters for timing belt drive systems. A more general
discussion of designing with timing belts can be found on the Timing Belt Guide pages. Installation Requirements The code requires a working installation of
Python 3 with scipy. For…... Listed under: Calculator Projects

321. The CoaTracker using Arduino

Has this ever happened to you? You wake up in the morning and realize that you're terribly late for work/class/your weekly
pedicure/whatever. You throw on a t-shirt and flip flops, sprint around your warm, heated house grabbing your belongings, and race out the door...where
you…... Listed under: Ideas, Sensor – Transducer – Detector Project Ideas

322. Arduino Bird Shoo!

In the spring every year, we have a group of robins who start making nests around the house. We also have lots of windows in a patio area
that when the robins see their reflection they think it’s a rival bird. They attack the windows…... Listed under: Sensor – Transducer – Detector Projects

323. MIDI-to-MQTT Bridge (console)

This command-line Python script transmits MQTT messages based on events from a MIDI input device such as the Akai MPD218
Drum Pad Controller. This can be used as a platform for remote control of one or multiple embedded devices. The MQTT and MIDI configuration must be…...
Listed under: Other Projects

324. 3D Printer Add-on Heated Bed

I have a FlashForge Finder 3D printer that did not come with a heated bed. The factory build plate is also somewhat limiting in
what kind of build surfaces you can use. I finally decided it was time to resolve those issues and added a…... Listed under: Other Projects

325. Arduino Performance Utility Tools

Some of the exercise packages include several utility and test programs. These are all standalone scripts using Python 3 and a few additional
packages as described in Python 3 Installation. The following scripts may be browsed in the Python MIDI tools directory on the course site. list_MIDI_ports.py Command-line…...
Listed under: Other Projects

326. Arduino String Appending Operators Code

Just as you can concatenate Strings with other data objects using the StringAdditionOperator, you can also use the
+= operator and the cconcat() method to append things to Strings. The += operator and the concat() method work the same way, it's just a matter of…... Listed
under: Development Board – Kits Projects, Projects

327. Arduino MQTT Plotter (PyQt5)

This utility GUI application is a tool for visualizing the content of multiple data streams passed as short numeric messages back
and forth across the network via a MQTT server. It supports opening an authenticated connection to the server, subscribing to a class of messages…... Listed
under: Wireless Projects

328. Gas Detector

Let's create a simple Gas Detector connectable to WiFi. The gadget would offer: web UI including gauges for LPG, CO, Smokesimple data handler
returning values in JSONcapable of regularly sending data to ThingSpeak server andobviously triggering laud alarm if threshold of dangerous concentrations
exceeded. We…... Listed under: Sensor – Transducer – Detector Projects

329. Arduino MQTT Monitor (PyQt5)

This utility GUI application is a tool for debugging programs using a remote MQTT server. It can show messages on multiple
topics and publish text-based messages on a single topic. The MQTT monitor application in operation. The large button at the top brings up detailed…... Listed
under: Other Projects

330. Synchronized 2-Axis Motion With Variable Speed (Arduino + LEDs + 28BYJ-48)
https://youtu.be/IiEz_sJd45E This tutorial shows how to move two stepper motors
so they will synchronously arrive at defined destination point. There are many sophisticated solutions for doing this such as GRBL or Marlin. Using an Arduino,
there are also dedicated “Multi Stepper” libraries that can support you. However, we will use…... Listed under: LED Projects

331. Solar powered arduino on the back of a playing card

Here's a six word tragedy: My arduino needs four AA batteries. Really?  Isn't this 2012?  Where's my
jetpack?!! Here's a way to the future -- a way to make a solar panel, from scratch, that can power any arduino off of sunlight or even light…... Listed under:
Battery Projects, Projects, Solar energy projects

332. Farkle! Handheld PCB Game Console

In this Instructable I will show you how I made my PCB Farkle Game! Farkle, also known as 10000, Zilch, 6 Dice, and Ten
Thousand, is a fun and challenging dice game with multiple variations and scoring options. I first got the inspiration from my…... Listed under: Game –
Entertainment Projects

333. Arduino-MQTT Bridge (PyQt5)
This GUI application connects an Arduino sketch to a remote MQTT server over the network. It communicates with the Arduino
using the serial port, relaying lines of text to and from the MQTT server. This can be used as a platform for remote Arduino to Arduino collaboration.…... Listed
under: Wireless Projects

334. How to Build an Arduino Voice Controlled TV Remote

#include <EEPROM.h> #include <Wire.h> #include <SoftwareSerial.h> #include <LiquidCrystal.h>
SoftwareSerial voice = SoftwareSerial(15, 16); LiquidCrystal lcd(5, 6, 7, 8, 9, 10); int pulses, A_SIG=0, B_SIG=1, menu=0, datacount, i, buttoncount=0; int count, j, k,
m, ready=0, even=0, fail, first_but=0, second_but=0; word Power[100]; word Remote[100]; //word Remote2[100]; word…... Listed under: Home Automation
Projects, Projects

335. SMARTWALKER D4E1

The smartwalker is being developed for a project called "design for everyone" at Howest university college of Applied Sciences (Belgium).
We are a group of design and occupational therapy students. This project is specifically made for an individual person: Peter. Peter can't see nor hear. When…...
Listed under: Other Projects

336. Arduino Lecture Sample Code

This collection of short Arduino sketches introduces a variety of programming concepts. The comments are minimal as these are
intended to be starting points for explanation. blink // 1. blink the onboard Arduino LED on pin 13. // 2. demonstrate setup(), loop() // 3. demonstrate…... Listed
under: Clock – Timer Projects

337. End of Days Clock

https://youtu.be/33Q_PqhLzWw The days got shorter here in Alaska until it felt like the murky light was only a short interruption of a long sleep so I built a
clock to display the seasonal diminishment (and expansion) of time. It also displays when it snows and…... Listed under: Clock – Timer Projects

338. Arduino Sketch Classifier Demo

N.B. this is new and still being tested. This sketch demonstrates an example of ultrasonic range sensor data processing using a
combination of signal filters and a classification tree. The classifier code was generated using the Python script classify_gen.py on recorded and labeled training
data. The underlying…... Listed under: Other Projects

339. 7-Segment NeoPixel Clock With Countdown Timer

https://youtu.be/H4J4Cl4Dduc In this Instructable, my twin brother, Sunyecz06, and I will show you how to
make a 7-segment NeoPixel Clock with Countdown Timer. The inspiration for this project began with our parents and their fitness room. While they have an
older digital clock in the room,…... Listed under: Clock – Timer Projects

340. Arduino Sketch FilterDemos

N.B. this is new and still being tested. This sketch demonstrates several examples of single-channel filters for processing sensor
data. The filter functions are purely numeric operations and not dependent on any Arduino-specific features. This supports offline testing, as they can be
compiled for debugging…... Listed under: Sensor – Transducer – Detector Projects

341. AI Auto-Classify Trash Can

This project is a trash can that recognizes and classifies garbage automatically. Use Machine-Learning and Arduino in Scratch. How it
works 1. Camera takes an image of garbage. 2. Machine-Learning model recognizes the classification of garbage by the image. 3. Electrical and mechanical parts
drive the garbage…... Listed under: Other Projects

342. Arduino Sketch Rock Paper Scissors

This sketch implements a rock-paper-scissors game using three pushbuttons for user input, two hobby servos in lieu of
human hand for displaying the countdown and selections, and tone feedback using a speaker. The code is intended as a demonstration for several techniques:
non-blocking event polling loop to…... Listed under: Game – Entertainment Projects

343. VERTICAL X-Y PLOTTER || DRAWING ROBOT || ARDUINO PLOTTER

In this instructable, we will learn to make an XY plotter/ Vertical plotter drawing machine
using Arduino. With this very efficient Vertical Drawing machine, We can draw images on different paper sizes, walls, or whiteboards along with printing texts,
generating arts and graffiti. Vector images(SVG)…... Listed under: Robotics – Automation Projects

344. Arduino Sketch Remote User Interface

This sketch demonstrates Internet-based remote communication using a companion ‘bridge’ program running on the
attached host which sends and receives messages via an online MQTT server. This allows connecting one Arduino to another over arbitrary distances, which we
can use as a starting point for…... Listed under: LED Projects

345. Brainwaves Fly a Drone

Drones are fun to fly, and it’s possible to do limited flying using brainwaves. The headset senses my brainwaves and transmits them to a
small computer. When I increase my attention level, the computer converts the signals and passes them to the drone’s controller, which…... Listed under: Drone

346. Arduino Sketch RemoteStation

This sketch demonstrates Internet-based remote communication using a companion ‘bridge’ program running on the attached
host which sends and receives messages via an online MQTT server. This allows connecting one Arduino to another over arbitrary distances, which we can use
as a starting point for…... Listed under: Other Projects

347. How to make a servo and Ardiuno stand
In this instructible I will show you how I make my servo stand.  This stand is useful if you want to test a new way to control a servo but
dont want to use a servo on your robot or something.  make Step 1: Cut…... Listed under: Arduino Motor Project Ideas, Ideas, Other Project Ideas
348. Arduino Sketch CKS-Shield-1-Test
This Arduino sketch exercises the standard hardware of the CKS-1-Shield board. It provides a console interface for reading
inputs and triggering outputs, and a set of asynchronous state machines for generating test motions. Console Interface static void parse_user_input(int argc,
char *argv[]) Process an input message tokenized from a…... Listed under: Other Projects

349. Arduino – How to Read SD Card Text File Line by Line

In this tutorial we will learn how to read the SD card text file line by line. Watch the Video! Note: You can
use other Displays such as OLED, but make sure that you use a board with enough memory like Arduino Mega,etc https://youtu.be/930oLDGyCSs Also…... Listed
under: Other Projects

350. The useless alarmed Coke can using Arduino

Hi all! This is the most useless project in the world! It consist in a Coke can attached to an Arduino trough a coaxial
cable and two resistors that make a sound when an hand is near it. Step 1: Materials and Tools For make…... Listed under: Game – Entertainment Projects,
Projects

351. Arduino Sketch Event Busy Box

Note: this sketch is a work-in-progress and only partly tested. This multi-file sketch is provided to serve as a template for projects
which combine responsive sensing and actuation with behavioral logic, implemented using a non-blocking event loop. The actual sketch does nothing
specifically useful, but…... Listed under: Other Projects

352. RC Arduino Domino Layer With Bluetooth App Control

How to 3D print and assemble your very own programmable and remote controllable automatic domino
laying machine. Who likes knocking down absurdly long runs of dominoes? I do. Who doesn't like laying them all by hand. I don't. That's why I made this. ?
Using…... Listed under: Bluetooth Projects

353. The useless but mazing QR-clock using Arduino

I got this idea for a while but I never had the chance to try it out. Friday, a workmate gave me a LCD shield for
Arduino and I thought that was the right time to build a clock that comunicate the time through QR-codes. Of course, it's…... Listed under: Clock – Timer Project
Ideas, Ideas

354. Arduino Sketch PinballGame

This sketch provides a pinball machine controller as an extended example of a real-time logic controller utilizing third-party
hardware drivers. It is configured to use hardware in the PinballShield circuit board. This sketch assumes you have already installed several third-party Arduino
libraries in your IDE…... Listed under: Game – Entertainment Projects

355. I2C With the ESP8266-01 !? || Exploring ESP8266:Part 1

Hello all ! With this instructable I will be writing and documenting a series of projects mentioning and
exploring the various hidden ( rather unexplored ) features of the tiny ESP8266-01 WiFi Module. Did you know that the ESP8266-01 supports I2C
communication? Yes it is…... Listed under: Other Projects

356. Building the YaNis EOS Controller using Arduino

The YaNis EOS controller is a device that allows you to wirelessly control your Canon DSLR from your Android
phone. What's really exciting here is that the Android interface allows you to change most of the camera's settings (like Shutter Speed, Aperture Size, ISO,
White…... Listed under: Arduino Android, Internet – Ethernet – LAN Projects, Projects

357. Arduino Sketch MPU6050 DMP6

This sketch is used by Exercise: MPU6050 IMU I2C Module. Main Source Code The main code is in MPU6050_DMP6.ino. // I2C
device class (I2Cdev) demonstration Arduino sketch for MPU6050 class using DMP (MotionApps v2.0) // 6/21/2012 by Jeff Rowberg <jeff@rowberg.net> //
Updates should (hopefully) always be available…... Listed under: Other Projects

358. WetRuler–Kitchen Helpers for the Visually Impaired

https://youtu.be/9_ZpVLm8NMY I have worked most of my adult life with patients with vision problems in
Alaska and pondered building a helpful device that would enable a more defined way of metering out fluids in a kitchen if users had no central vision. There are
devices…... Listed under: Other Projects

359. Home Automation System Using Smartphone and Bluetooth Part 2 With Manual Control
Hello friends welcome back to "Techno-E-solution", In previous video
we see how we can control the home appliances with the help of Smartphone & Bluetooth but there is no any manual control for the system, so In this tutorial
we are going to make a…... Listed under: Bluetooth Projects

360. Arduino Sketch Adafruit PWM

This sketch is used by Exercise: Adafruit PWM I2C Module. Full Source Code The main code is in Adafruit_PWM.ino.
/*************************************************** This is an example for our Adafruit 16-channel PWM & Servo driver PWM test - this will drive 16
PWMs in a 'wave' Pick one up today…... Listed under: Other Projects

361. Color Changing Nightlight using Arduino

So, instead of buying a nightlight for my kid's room, I decided I could do a much better job of it. This nightlight cycles
through 1500 colors over 7 mins and turns on when it is dark and turns off when it is light. It…... Listed under: Arduino LED Project Ideas, Game – Entertainment
Project Ideas, Ideas

362. Creative Console for Space Mouse!

https://youtu.be/ZeQCTqFfhYo Hello makers!! For those who already know my Instructable "Space Mouse"
https://www.instructables.com/Space-Mouse-With-Ard... there is now an extension for it! The Creative Console!! I designed this console to extend the
functionalities of the space mouse keeping the prime concept: keep it cheap, customizable and 3D…... Listed under: Other Projects

363. Arduino Sketch WS2801LED

This sketch is used by Exercise: WS2801 RGB LED SPI Module. Full Source Code The full code is all in one file WS2801LED.ino. // -*-
mode:c++; -*- /// @file WS2801LED.ino /// /// @brief Example for driving several WS2801 RGB LED modules over SPI on an Arduino UNO.…... Listed under: LED
Projects

364. Arduino Sketch OneInOne Out ASCII

This sketch is an Arduino program which acts as an simplified hardware I/O server using a simple readable message
protocol. The intent is to provide an easily modified and extended real-time embedded hardware controller which can interface easily with a non-real-time 
client running on a…... Listed under: Other Projects
365. Tiny Whoop Drone Gate With Timer
I got my son a tiny whoop indoor FPV drone for Christmas, specifically an EMAX Tinyhawk II. We’ve had fun creating small
obstacle courses in our basement, but one thing was missing – a timer so we could compare flight times. This instructable (my first)…... Listed under: Clock –
Timer Projects

366. Arduino Switch Statement used with sensor input

An if statement allows you to choose between two discrete options, TRUE or FALSE. When there are more than two options,
you can use multiple if statements, or you can use the switch statement. Switch allows you to choose between several discrete options. This tutorial shows
you…... Listed under: Interfacing(USB – RS232 – I2c -ISP) Projects, Projects, Sensor – Transducer – Detector Projects

367. Arduino Combi-button Lock optional Android support

Recently, I decided I would like to attempt to make a passcode lock with my newly acquired Arduino Uno,
but all the tutorials I could find made use of a modified keypad, something that not every Tom, Dick and Harry has lying about. I therefore…... Listed under:
Arduino Android, Internet – Ethernet – LAN Projects, Projects, Security – Safety Projects

368. Arduino Sketch Input Hysteresis

This sketch is used by Exercise: Input Hysteresis. Full Source Code The full code is all in one file InputHysteresis.ino. //
InputHysteresis.ino : Arduino program to demonstrate a simple single-state hysteretic response. // Copyright (c) 2014-2015, Garth Zeglin. All rights reserved.
Licensed under the terms // of…... Listed under: Other Projects

369. 3D Print Bed Leveling Tool Using M5StickC

Do you ever find it a hassle to manually level your 3D print bed every time you make a print? Even seasoned 3D
printing pros need to level the printbed after every couple prints. We’ve created a device that helps tremendously improve this procedure. This…... Listed under:
Other Projects

370. PEZ Robo Dispenser Using Arduino

I was strolling down the candy aisle at the supermarket and there it was:  the PEZ dispenser, conjuring up sweet (literally)
childhood memories served up by my favorite cartoon characters in squarish sugary pellets.  Then, all of a sudden, an LED went off in my…... Listed under:
Game – Entertainment Projects, Projects, Robotics – Automation Projects

371. Arduino Sketch Music Sequence Demo

This sketch is used by Exercise: Music Sequencer. Full Source Code The full code is all in one
file MusicSequenceDemo.ino. // MusicSequenceDemo.ino : demonstrate generation of two simultaneous tones at different rates and patterns // The example
program generates audio-frequency square waves at different // pitches and…... Listed under: Sound – Audio Projects

372. Indoor Air Quality Meter

Simple project to check the air quality in your house. Since we stay/work from home a lot lately, it might be a good idea to monitor the
quality of the air and remind yourself when it's time to open the window and get some fresh…... Listed under: Metering – Instrument Projects

373. Arduino Sketch Event Loop Demo

This sketch is used by Exercise: Event-Loop Programming. Full Source Code The full code is all in one file EventLoopDemo.ino.
// EventLoopDemo.ino : demonstrate generation of two simultaneous square waves at different rates // The example program generates audio-frequency
square waves at different // pitches on pins…... Listed under: Arduino Programmer Projects

374. BLACKBOARD V-PLOTTER

In this instructable, I'd like to share how to build a vertical plotter that can draw texts and images on the blackboard. Let's getting
started. https://youtu.be/YTYxPt15hTQ Time-lapse video with hatch fill extension from Inkscape. https://youtu.be/w_8iHQgj6ss Step 1: Bill of Materials Main
components: 1pcs x Arduino Mega…... Listed under: Other Projects

375. Quality of Life Meter

Harsh new rules at work getting you down? Overtime sucking the life out of you? Or maybe things are great, either way now you can show
your co-workers and management exactly how you feel about your job without a single meeting, memo, or team bonding…... Listed under: Metering –
Instrument Projects

376. Arduino Sketch Stepper Sweep

This sketch is used by Exercise: A4988 Stepper Motor Driver. Full Source Code The full code is all in one file StepperSweep.ino. //
StepperSweep - move a stepper motor at different rates // // Copyright (c) 2016, Garth Zeglin. All rights reserved. Licensed under the // terms…... Listed under:
Motor Projects

377. PCB NANOLEAF/HEXALEAF

I've been a fan of Commerical Nanoleaf available in the market but their cost is pretty high so I try to make my own version by
designing a WS2812B LED strip and connecting three of these strips together in a triangular shape to make a…... Listed under: Other Projects

378. Modifying a Robot Arm using Arduino

Essentially another tutorial involving controlling DC motors. In this post I’m going to first alter a robot arm I had built previously from a
beginners kit so that it can be controlled from Arduino. Then I’m going to write a series of posts on different…... Listed under: Projects, Robotics – Automation
Projects

379. RC Paper Tank – Bring your 3D models to life

Bring your 3D models to life! In this instructable we will custom make a remotely controlled tank. We will infuse
paper-craft with an arduino based system. This tank will be controlled on a android based phone though a bluetooth connection. I've strived to create

something with…... Listed under: Game – Entertainment Projects
380. Arduino Sketch Wheel Drive
This sketch is used by Exercise: DRV8833 Dual DC Motor Driver. Full Source Code The full code is all in one file WheelDrive.ino. //
WheelDrive - move a pair of DC motors at varying rate and direction // // Copyright (c) 2016, Garth Zeglin. All rights reserved.…... Listed under: Motor Projects

381. Fruit Sorter Robot Using Flexible Gripper

Hello Everyone, thank you for showing interest in our project. In this project, we are showing a fully automated robot
that sorts fruits and vegetables based on their color. The project happened in the context of the Bruface program and more precisely in the mechatronics…...
Listed under: Robotics – Automation Projects

382. Barcode Reading using Roborealm Output on Arduino LCD

This Instructable shows how to create a Barcode Reader using only a webcam together with
Roborealm and Arduino. The webcam used in this demonstration is the Logitech Quickcam and the LCD screen is labelled, JHD162A. What you need for this
project: 1. Arduino UNO 2.…... Listed under: Interfacing(USB – RS232 – I2c -ISP) Projects, LCD Projects, Projects

383. Arduino Sketch Sound Demo

This sketch is used by Exercise: Multichannel Bipolar Transistor Driver. Full Source Code The full code is all in one
file SoundDemo.ino. // SoundDemo - generate sound using a speaker and pager motor // // Copyright (c) 2016, Garth Zeglin. All rights reserved. Licensed under
the //…... Listed under: Sound – Audio Projects

384. Professional Weather Station Using ESP8266 and ESP32 DIY (Please Check the V2.0 Improved Version Link!)
PLEASE CHECK THE NEW IMPROVED WEATHER
STATION LINEAMETEOSTAZIONE v2.0! LINK VERSION 2.0 LINEAMETEOSTAZIONE HERE LineaMeteoStazione is a complete weather station which can be
interfaced with professional sensors from Sensirion as well as some Davis Instrument component (Rain Gauge, Anemometer) The project is aimed as DIY…...
Listed under: How To – DIY – Projects

385. Arduino Sketch ServoSweep

This sketch is used by Exercise: Servo Sweep. Full Source Code The full code is all in one file ServoSweep.ino. // ServoSweep - move
a servo along trajectories // // Copyright (c) 2016, Garth Zeglin. All rights reserved. Licensed under the // terms of the BSD 3-clause…... Listed under: Other
Projects

386. $50 Analog Joystick (HOTAS) With Haptic Feedback for Flight Sim
The aim is to create a fully functioning USB HOTAS* joystick from low cost electronics parts. I
bought Elite Dangerous when it was released for the Mac and realised very quickly I was going to have the floor wiped with me if I didn't have…... Listed under:
Game – Entertainment Projects

387. Arduino Sketch Read Sonar

This sketch is used by Exercise: Read Ultrasonic Ranger. Full Source Code The full code is all in one file ReadSonar.ino. // ReadSonar -
measure distance using a HC-SR04 or compatible ultrasonic ranger // // Copyright (c) 2016, Garth Zeglin. All rights reserved. Licensed under the //…... Listed
under: Other Projects

388. Apple Gripper

Fruit and vegetable market is a big sector that is worth more than 200 billion euros worldwide, this is expected to grow even more in the next
decade due to an increasing healthier lifestyle across different European countries. When fruits and vegetables are sold at…... Listed under: Other Projects

389. Analog In, Out Serial using Arduino

This example shows how to read an analog input pin, map the result to a range from 0 to 255, and then use that result to set
the pulsewidth modulation (PWM) of an output pin to dim or brighten an LED. Circuit image developed using Fritzing.…... Listed under: Projects, PWM Projects

390. Arduino Sketch Sensor Fade

This sketch is used by Exercise: Sensor Fade. Full Source Code The full code is all in one file SensorFade.ino. // SensorFade - read a
photosensor and control several LEDs at different brightnesses // // Copyright (c) 2016, Garth Zeglin. All rights reserved. Licensed under the //…... Listed under:
Sensor – Transducer – Detector Projects

391. DIY Current Sensor – 2.0

Hello there! I hope you all are fine and in good health. This instructable is about making your own current sensor that is compatible
with Arduino and most other widely popular microcontrollers. This project features a compact design and an all SMD component based circuit,…... Listed under:
Sensor – Transducer – Detector Projects

392. Arduino Sketch Read Accelerometer

This sketch is used by Exercise: Read Analog Accelerometer. Full Source Code The full code is all in one
file ReadAccelerometer.ino. // ReadAccelerometer - read a 3-axis analog accelerometer and display the results to the serial port // // Copyright (c) 2016, Garth
Zeglin. All rights reserved.…... Listed under: Metering – Instrument Projects

393. MicroBot V1
So this is my microbot V1 which is an ESP32 based robot which is powered by a Wemos d32 pro and controlled by Blynk. Its body is a 3D printed square surface that
has mounting holes for the same size PCB which is mounted with…... Listed under: Robotics – Automation Projects

394. Midi Light Show using Arduino

For a class, my teammate and I decided to develop a MIDI based system that has a responsive light for each note played.  For
example, if you plug our little setup to a keyboard, pending on which note you press, you'll get a specific color.…... Listed under: Projects, Sound – Audio Projects

395. Arduino Sketch ReadSwitchInput

This sketch is used by Exercise: Read Switch Input. Full Source Code The full code is all in one file ReadSwitchInput.ino. //
ReadSwitchInput - read a digital input and report its value using the LED and serial monitor // // Copyright (c) 2016, Garth Zeglin. All rights…... Listed under: LED
Projects

396. Game & MINTIA

This instructables show how to use a tiny sweet box to make a NES console. https://youtu.be/-ehaDDSYJaE Supplies TTGO T7 v1.3
https://www.aliexpress.com/af/Ttgo-t7-v1.3.html?d=... 1.54" ST7789 IPS LCD https://www.aliexpress.com/af/1.54-st7789.html?d=y... Lipo 303040
https://www.aliexpress.com/af/lipo-303040.html?d=y... MAX98357 I2S DAC audio breakout board https://www.aliexpress.com/af/max98357.html?d=y&or...
10*18 mm speaker https://www.aliexpress.com/af/1018-speaker.html?d=... Thin Prototype PCB https://www.aliexpress.com/af/lipo-303040.html?d=y... Four…...
Listed under: Game – Entertainment Projects

397. Arduino Sketch SoftBlink2

This sketch is used by Exercise: Soft Blink. Full Source Code The full code is all in one file SoftBlink2.ino. // SoftBlink2 - fades the 
onboard LED on and off. // // Copyright (c) 2016, Garth Zeglin. All rights reserved. Licensed under the // terms of the…... Listed under: LED Projects
398. Arduino Audio Sound Level Meter
This is add-on of the audio amplifier project result which is introduced in other instructable.
(https://www.instructables.com/PC-Speaker-Amplifier/) Usually many types of sound level meters are directly connected with input (or rarely output) signal lines
of amplifier. But personally I’m thinking any electrical connections with amplifier circuit…... Listed under: Sound – Audio Projects

399. Piano Metronome

This project was conceived of after I examined the types and styles of various off-the-shelf Metronomes. I am currently learning to play the
piano and having a Metronome in order to keep time was necessary. I felt sure that I could build one based on…... Listed under: Sound – Audio Projects

400. Arduino Sketch SoftBlink1

This sketch is used by Exercise: Soft Blink. Full Source Code The full code is all in one file SoftBlink1.ino. // SoftBlink1 - fades the
onboard LED on and off. // // Copyright (c) 2016, Garth Zeglin. All rights reserved. Licensed under the // terms of the…... Listed under: LED Projects

401. Arduino Basics: Working One LED

I've been encountering lots or Arduino projects but generally most are on intermediate and advanced level and only a few
basic instructions on how to start with Arduino. This project I made were actually inspired by this example on the Arduino page, but a much…... Listed under:
Arduino LED Project Ideas, Ideas

402. Tweet-a-Pot: Twitter Enabled Coffee Pot using Arduino

Like the idea of making coffee on the fly? from your bed? While you're on the bus coming home? Then
the Tweet-a-pot is for you! Tweet-a-pot is the next in fancy twitter enabled devices. This coffee pot enables its owner to make a pot of…... Listed under: Home
Automation Project Ideas, Ideas

403. Making a Prototype With Arduino (TIM-01 EYES)

I have been designing and building a robot. It got to the stage where it was time to do a head for it, but before I
did the head I needed to design some Eyes for it using the Nokia screens found cheaply on eBay. There…... Listed under: Development Board – Kits Project Ideas

404. Arduino Sketch Fade

This is a standard Arduino example sketch, copied here for reference. Full Source Code The full code is all in one file Fade.ino. /* Fade This
example shows how to fade an LED on pin 9 using the analogWrite() function. This example code is in the…... Listed under: LED Projects

405. 3D Printed Digital Camera

This is a 3D printed digital camera that you can build yourself. By making your own digital camera, it takes away some of the mystery
around how such devices work, and are fabricated. Also, it allows you to fully customize the camera to your liking.…... Listed under: Video – Camera – Imaging
Projects

406. Arduino M&M Color Sorter

Are you tired of sorting your m&ms by hand? Looking for a silly way to spend your time and 3D printer filament? Then this is the
Instructable for you. This is a project that I built for one of my engineering courses, in which we…... Listed under: Other Projects

407. Blink Arduino Sketch

This is a standard Arduino example sketch, copied here for reference. Full Source Code The full code is all in one file Blink.ino. /* Blink
Turns on an LED on for one second, then off for one second, repeatedly. Most Arduinos have an on-board LED you…... Listed under: LED Projects

408. Acrylic Arduino Prototyping Stand

I do a lot of projects with Arduino's and breadboards.  Often as I work on a messy workbench, the Arduino or breadboard get jostled an
wires pop out of the headers or the breadboard. To solve this problem, I decided to make a simple…... Listed under: Ideas, Interfacing(USB – RS232 – I2c -ISP)
Project Ideas

409. Arduino OLED Spectrum Analyzer

Image: Today I am make an Arduino OLED Spectrum Analyzer its work with 0 to 3.3v Analog input. This is very smooth and
clear Visualization of audio frequencies. This is very important to make an audio spectrum analyser for DVD Music player, IPod, MP3 player…... Listed under:
Other Projects

410. The LED Strip Jellyfish Costume with Arduino & LPD8806 Led Strips
It all started when I saw a BBC documentary in 2002 about deep waters of the ocean. There
was a biolimunescent jellyfish in the documentary, probably of the species "ctenophores" that grabbed my attention so in the later years I decided use it as a
Halloween costume.…... Listed under: LED Projects

411. How to use a while loop to calibrate the value of an analog sensor using Arduino
Sometimes you want everything in the program to stop while a given condition
is true. You can do this using a while loop. This example shows how to use a while loop to calibrate the value of an analog sensor. In the main loop, the sketch
below reads…... Listed under: Metering – Instrument Projects, Projects, Sensor – Transducer – Detector Projects

412. Fainting Goats Are Friends Not Food

Project by Ailey Simpson and Peter Ehvert Rooted in biomimetics, this project for Computational Design and Digital
Fabrication looks to emulate one of the most useless behaviours seen in the natural world, the Fainting Goat. The robot shown here copies some of the core
principals of the…... Listed under: Other Projects

413. Arduino-l3dgecomm – Integrating L3DGEWorld and Arduino

L3DGEWorld is a tool for monitoring and interacting with networks and computer systems. Within a
3D world, entities bounce, spin, scale and otherwise change. These entities all represent an entity in another context - be it a server, phone, router or other
monitorable device. The…... Listed under: Interfacing(USB – RS232 – I2c -ISP) Projects, Projects

414. Mailbox Phone Alert

The mailbox phone alert sends you a text whenever you get mail. I remember anxiously checking my mail multiple times a day during the
spring of my senior year of high school as I awaited letters back from colleges. Nervously, I would walk up to…... Listed under: Phone Projects


415. Painless WiFi on Arduino
Communication with the outside world is a great feature for Arduino Projects and mandatory for many of them. In this instructable, we
will, painlessly, create an Arduino WiFi project that allows you to send it commands to turn on/off LED's connected to the Arduino from…... Listed under: Wifi -
WLan Projects
416. Tree Climbing Robot using Arduino
After I got comfortable programming and building with an Arduino, I used my newly acquire microcontroller skills to build a
robot.  Using a microcontroller, four high-torque DC gear motors, spiked legs, a linear actuator, rotation sensors, and 3 L298 H-bridge circuits, this robot can
climb…... Listed under: Projects, Robotics – Automation Projects

417. Home Security Smart Clock IoT Emergency App Notification

I made a Clock that not only display Time,Date, Temp & Hum but you can send message to the clock
via Mobile App (Blynk) from anywhere in the World as long as you are connected to internet. And you can also alert by Pressing Panic Button in…... Listed under:
Clock – Timer Projects

418. Palm Arduino Board V3

I design and create this Palm Arduino V3 prototype PCB, as I was tired of recreating Arduino Compatible on perf board every time I
prototyping a new project, especially when I had to spend  a lot of time tracing the wiring to see that I…... Listed under: Development Board – Kits Projects,
Projects

419. How to make a XY-plotter with Makeblock

Last month, I made a XY-plotter by Makeblock and use it to built a Drawing Robot. This Drawing Robot was built with
two Linear Motion Shaft D8x480mm, two Long Beam0824, the timing belt, two stepper motors, two stepper motor driver, and a micro-controller Arduino. 
You…... Listed under: Robotics – Automation Projects

420. How to Build a Smart House Model

Smart House will be the next smartphone. The technology that encompasses a smart house will become the new normal for
modern-day homeowners. Smart houses range from basic to advanced depending on the sensors that are installed in the house and the operating system. The
ARD-02,…... Listed under: Other Projects

421. Music PlayBox – ITTT

HKU Assignment Welcome to my "If This Then That" Project. For this project I made a simple music box where you can play several chords
of instruments. You can choose which instrument you want to play (piano/guitar) and which chord you want to play per…... Listed under: Sound – Audio Project
Ideas

422. Best RGB LEDs for any project (WS2812)

When we're working with LEDs, we often like to control their state (on/off), brightness, and color.   There are many,
many different ways of going about this, but none are as compact a solution as the WS2812 RGB LED.  In its tiny 5mm x 5mm…... Listed under: LED Projects

423. Rainbow Led Circuit Sculpture

Today I would like to share how to make a sculpture circuit that controls 16 RGB leds using ATTINY85. We can adjust their colors separately
according to the colorwheel rule with a touch button. Step 1: Things We Need The main components are as follows:…... Listed under: LED Projects

424. Tiny MatchBox LCD Display – Desktop Decor

Have a nice day, in this instructable I'll explain how to make a little decorative display for your desktop. It connects
to your PC via USB and you can upload any image you want (240*240 BMP) It uses an Arduino pro micro for the serial…... Listed under: LCD Projects

425. DIY Skee Ball Machine

The skee ball machine is a wonderful thing. The simple experience of rolling a ball into a target is so freakishly satisfying that I used to
play as much as I could as a kid at the local amusement park/mini-golf course. The sound of the…... Listed under: How To – DIY – Projects

426. How to Build 8x8x8 LED Cube

An 8x8x8 LED cube is a visual treat with 3D effects and patterns. It works on the concept of Persistence of Vision, a feature of the
human eye which tricks our brain in to thinking that an object is present permanently at a place if…... Listed under: LED Projects

427. The Dryer Messenger using Arduino

The dryer in our house is in an out-of-the-way corner where it’s hard to hear the buzzer. When we miss it, the clothes sit in
the dryer getting wrinkly, so we start the dryer again, don’t hear the buzzer again … it’s an endless cycle.…... Listed under: Home Automation Projects, Projects

428. Morse Code Iambic Trainer and Decoder

In Amateur radio, Morse code is used to send messages using a series of short or long pulses which are heard by the
operator as audio beeps. The short beeps are known as dots or dits, and the longer beeps are known as dashes or…... Listed under: Other Projects

429. LED Shoulder Pads

For this project, I was inspired by my best friend. She had been wanting some disco-fabulous armor-inspired wearable technology for music
festivals and costume parties for some time. I took a pair of construction/gardening knee-pads and turned them into glitterific shoulder pads that shine
bright…... Listed under: LED Projects

430. Sense Magnetic Fields Like a Bird – Sensory Extension Puppet

This project will show you how to create a computationally enriched puppet that can detect
magnetic fields. The puppet (who I call Compy) has two very sensitive GMR analog magnetic sensors that are located in her beak, these sensors are read by an
Arduino Nano…... Listed under: Sensor – Transducer – Detector Projects

431. Using Copper Tape To Create A Digital Selection Pad using Arduino
This is partially me sharing this technique, and partially me learning how to use Instructables.
If there are issues with my documentation of the technique or my use of Instructables, please let me know in the comments - thanks! I needed a long row of…...
Listed under: Ideas, Interfacing(USB – RS232 – I2c -ISP) Project Ideas

432. Reverse Engineered Bumper Sensor Campsite Security Alarm

This Instructable is to build a very smart, talking campsite security system that is disguised in an

owl decoy. Now, this isn't your typical Arduino ultrasonic distance sensing project. Rather, you will learn how to reverse engineer the very inexpensive, but far
superior automotive bumper backup…... Listed under: Security – Safety Projects
433. How to Create an Arduino Compatible Bluetooth 4.0 Module
I had been looking for a cheap alternative to some of the Arduino Bluetooth devices I'd seen, which
in my opinion are overpriced. Redbear's Mini: $39.95 (Note: This is a uC and BLE combo). Redbear's Uno Shield: $29.95 BLEDuino: $19.95 (if part of Kickstarter)
Bluegiga…... Listed under: Interfacing(USB – RS232 – I2c -ISP) Projects

434. Sense Direction Like a Bird: Sensory Extension Mask

In a couple of weeks, some students will visit my lab (Craft Tech Lab) to learn more about wearable
technologies. I wanted to build a quick and simple application of a sensor and vibration motors for them to play around with and rough up. While…... Listed
under: Sensor – Transducer – Detector Projects

435. Tilt Sensing Bracelet using Arduino

A bracelet decorated with six conductive fabric petals and a thread of beads with a metal bead at the end, makes for a
simple six point tilt detection. It is also designed so that the metal bead will make contact with two petals if it…... Listed under: Ideas, Sensor – Transducer –
Detector Project Ideas

436. Programmable Arduino Remote Control (PCB)

With this small, palm-sized device, it is possible to remote control your PC or your Smartphone. Or to control your PC and your
Smartphone at the same time. And it is freely programmable. You can write programs like: Login to your PC, open and login…... Listed under: Arduino Programmer Projects

437. Homemade Arduino Friendly Pulse Sensor

I saw the Open Hardware Pulse Sensor at thought I'd try to make it at home.  Took me awhile, but here's my
bumbling process. Step 1: Pulse Sensor -- Overview I've been working on re-making the the Open Hardware Pulse Sensor so it'd be "easy" to send off to…...
Listed under: Medical – Health based Projects, Sensor – Transducer – Detector Projects

438. FRICTION CALCULATOR – WITH IR LASERS

Friction can often seem like a 'boring' force. Something we are all familiar with from a young age, but friction does a
lot more than just make objects slow down - although that is a big part of this project. Friction allows the world to…... Listed under: Calculator Projects

439. Sensory Helping Hands: Modular Sensory Augmentation System (Prototype)

Having made a lot of wearables as an engineer, advisor, and through replication,
there's one irritation that I find consistent with a lot of systems (mine included) - components (typically sensors & actuators) can't be maneuvered to the
wearer's preferences. To begin to think about…... Listed under: Sensor – Transducer – Detector Projects

440. Otto Robot || Arduino Robot || Simple Arduino Robot

Hi, First off all Please subscribe to my youtube channel. This is the simplest Arduino robot. The name of
this Arduino robot is Otto Robot. The beginners can build it with simple steps. All codes and library is given on my github page. Let's begin this cut…... Listed
under: Robotics – Automation Projects

441. DIY Robotic Hand Controlled by a Glove and Arduino

This project idea came to me when I was sitting on a bed on a hotel room on vacation. I thought: "It'd be
really neat to have a robotic hand that I can control with my own hand!" Upon returning home, I embarked upon a…... Listed under: Robotics – Automation
Projects

442. Cheap Expandable Floor Piano

I created design to build a big and expandable floor piano (1 to 8 or more octaves) . They were plenty of challenges with this
piano. I wanted all bullet ticked: - Cheap - Big but could fit in a car (from 1 to 8…... Listed under: Sound – Audio Project Ideas

443. Hack Computer to Make It Smart!

Have you ever wondered why smartphones are called smart-phones? Because they are smart, right? They do some works
automatically, smartly. That's the short answer. I was thinking something, even if computers are a lot more powerful than phones, why aren't they smart! For
instance, mobile…... Listed under: Development Board – Kits Projects

444. MAXIMIZE THE CAPABILITIES OF ESP-01 ESP8266

ESP-01 ESP8266 is a popular and widely used module because of its low-cost, reliability and easily availability in
the market. It can be used as a stand-alone device or connected with a microcontroller. The ESP-01 is the smallest ESP8266 module and it has limited I/Os.…...
Listed under: Other Projects

445. Arduino Barometric Pressure Web Server

This example shows how to use SPI communications to read data from a SCP1000 Barometric Pressure sensor, and
how to then post that data to the web by using your Arduino/Ethernet Shield combo as a simple web server. Using the Ethernet library, your device will…...
Listed under: Internet – Ethernet – LAN Projects, Projects, Sensor – Transducer – Detector Projects

446. NES in a Cartridge using Arduino

Have your ever seen any of "Ben Hecks" portable console builds? Well if you haven't, he often uses these Chinese Famicom
clone consoles. These cloned consoles are often times refered to as NOAC's, meaning NES On A Chip. They are called this because they are…... Listed under:
Game – Entertainment Project Ideas, Ideas

447. Arduino Bluetooth PC Fan Wind Sensor With RemoteXY

This projects is a mix of two of my main passions, Arduino and Wind. Here is a simple project that I used
this OLD PC fan as a small wind generator to sense the wind speed. Here we are using modified PC fan as a wind speed…... Listed under: Bluetooth Projects


448. Create an Internet Connected Pill Dispenser
The P.I.L. Box - A Better Medication Reminder System Studies show the consequences of patients not taking medications according
to doctor's orders can be serious, especially in older patients.With today's low cost micro-controllers and sensors (and the incentive of the Radio Shack / Instructables Micro…...
 Listed under: Internet – Ethernet – LAN Projects

449. COD (Camera on Deck) – Motion Time Lapse

INTRODUCTION Hi. I've built this little device for my HNC project back in the old days (2015). Because I like
photography, and my task was to make something using microcontrollers. I've made this little device using Arduino UNO, as this was an ideal board for…...
Listed under: Clock – Timer Projects, Video – Camera – Imaging Projects

450. Android talks to Arduino

This project slightly modifies the Google Android sample app called "Bluetooth Chat" so you can type a message in the Android app and that same
message will appear on an LCD attached to an Arduino Uno. Functionality:  Android  talks to Arduino 1. Run the Android…... Listed under: Arduino Android,
Interfacing(USB – RS232 – I2c -ISP) Projects, Internet – Ethernet – LAN Projects, Phone Projects, Projects

451. Make an Emoticon Jacket with LCD screen using Arduino

Concept: I would like to make a jacket that has a small LCD screen to create subtexts for interpersonal
human interaction. The user would use a limited "keyboard" with force sensors and buttons under soft silicone keys to create computer textual subtitles to
human interaction…... Listed under: Arduino LCD Project Ideas, Game – Entertainment Project Ideas, Ideas

452. DIY USB Type-C Power Delivery Trigger Board

In this video we will have a closer look at a USB Type-C Power Delivery Trigger board. Such boards are used to
output 5V, 9V, 12V, 15V or even 20V from a Power Delivery compatible power source. So I will be showing you how such…... Listed under: Interfacing(USB –
RS232 – I2c -ISP) Projects

453. Create Interactive Electronic Instruments with MaxMSP

This Instructable is part 3 in an Intro to MaxMSP series I've just finished teaching atWomen's Audio
Mission in San Francisco.  Part 1 is an introduction to MaxMSP and MIDI, part 2 is intermediate Max and Audio, and this Instructable is all about interfacing
MaxMSP with hardware. I…... Listed under: Other Projects

454. Make another Arduino LCD shield

In this tutorial we make an LCD shield for using 20 character by four row LCD modules with Arduino Uno. Updated
18/03/2013 In this article you can follow the process of making another LCD shield for the Arduino Uno or compatible boards. In the past (which explains…...
Listed under: LCD Projects, Projects

455. Control Your Computer With a Stepper Motor!

In one of my previous Instructables, I showed you how you can use a Stepper motor as a rotary encoder. In this
Instructable, let's learn how we can use it to control our computer. So without further ado, let's get started! Step 1: Watch the Video…... Listed under: Motor
Projects

456. RGB LED Skate Light

I like to go skating every week but I noticed that the my skates weren't cool enough so I decided it was time for some lights! I installed these
lights on my Dad's skates as a thank-you present for taking care of the pool for…... Listed under: LED Projects

457. ITTT – Cat Laser

Heey my name is Rens Kuilman. For a school project (If This Then That) we had to make something using the Arduino. After a few misses I
decided to make a random laser, which I a lazy cat owner could use the get his lazy…... Listed under: Other Projects

458. Arduino controlled window for cat

I am submitting this instructable to the Arduino challenge. Please remember to vote! My neighbor had a little problem with
his cat. It want's to go out and back inside too frequently. Usually he opens just his kitchen window and let's the cat in/out. Usually…... Listed under: Home
Automation Project Ideas, Ideas

459. Homemade Infrared Rangefinder (Similar to Sharp GP2D120) using Arduino

Here is my instructable on how to construct a pretty simple (for some!) short range
infrared rangefinder/range sensor. Infrared rangefinders are very useful in a number of projects. The majority of these come from obstacle detection (in robots)
or generally detecting distances! The one shown…... Listed under: Internet – Ethernet – LAN Projects, Metering – Instrument Projects, Projects, Sensor –
Transducer – Detector Projects

460. Touch Sensitive Interactive Music Instrument DIY / Windows Version

https://youtu.be/_xEfiFxLKto “Sensor Retouch” touch sensitive interactive instrument which
allows to play Water, Fruit, Plants and Conductive surfaces as a musical instrument by your touch. All you need is Arduino and few upgraded touch sensitive
sensors, i’ll teach you how to put together everything and let start playing with your new interactive instrument !…... Listed under: Sound – Audio Projects

461. Alastor “Mad-Eye” Moody Moving Eyeball

Before COVID hit my son went to a costume party dressed as Professor Alastor "Mad-Eye" Moody from Harry Potter. I
made him a moving eyeball using an Arduino, servo and ping pong ball. Step 1: Parts list Arduino Uno https://smile.amazon.com/dp/B008GRTSV6 Arduino
Case https://smile.amazon.com/dp/B00HFSWC06 9-volt Battery Clip https://smile.amazon.com/dp/B01AXIEDX8 12g…... Listed under: Other Projects

462. Make your own Enigma Replica

EDIT: This Instructable has won Second prize in the 2013 Radio Shack Microcontroller Contest. Thank You to all who voted! This is our very first
Instructable and this step by step guide will show you how to build a fully functional electronic replica of the…... Listed under: Game – Entertainment Projects, LED Projects


463. Robotic Eye using Arduino
Hello, This time I will show an application of the infrared sensor module with Arduino. This module (composed of a pair of LEDs, a
infrared transmitter and a receiver and an IC that generates a frequency modulated) is generally used to detect obstacles in robots.…... Listed under: Ideas,
Robotics – Automation Project Ideas

464. MIDI Note Player using Arduino

This tutorial shows how to play MIDI notes from an Arduino. MIDI, the Musical Instrument Digital Interface, is a useful protocol
for controlling synthesizers, sequencers, and other musical devices. MIDI devices are generally grouped in to two broad classes: controllers (i.e. devices that
generate MIDI…... Listed under: Game – Entertainment Projects, Projects, Sound – Audio Projects

465. Serial Call and Response with ASCII-encoded output using Arduino
This example demonstrates string-based communication from the Arduino board to the
computer using a call-and-response (handshaking) method. The sketch sends an ASCII string on startup and repeats that until it gets a serial response from the
computer. Then it sends three sensor values as ASCII-encoded…... Listed under: Interfacing(USB – RS232 – I2c -ISP) Projects, Projects

466. Arduino Magnetic Board

My first meeting with microcontrollers was a few decades ago (you might remember the first Parallax Basic Stamps) but with the
Arduino platform it happened more recently, only 6 years ago and although at that time the development boards were quite difficult to find, even…... Listed
under: Development Board – Kits Projects

467. Trinity Assembly

Hey dudes! Lets build the trinity synt! ! More information about the synth at: www.bastl-instruments.com Before you start: the board solders
from both sides and the component goes always above its printed sign so it hides the sign! You should know that there are some…... Listed under: Other
Projects

468. 12×12 LEDX From Escape From Tarkov

Once after Russian EFT community podcast where one of the guests said that expensive items, such as LEDX, should
occupy a larger number of the slots in secure containers... It didn't happen in 0.12,6 patch, but it did happened in my workshop. Supplies Things required:…...
Listed under: LED Projects, Sound – Audio Projects

469. 6 button RGB controller using Arduino

In this instructable we will learn how to use 6 buttons to control the color of an RGB LED with the use of an Arduino Micro
Controller. This is a fun and easy little project that should take you no more then 20 minutes to…... Listed under: Ideas, Interfacing(USB – RS232 – I2c -ISP)
Project Ideas

470. Serial Call and Response using Arduino

This example demonstrates multi-byte communication from the Arduino board to the computer using a call-and-
response (handshaking) method. This sketch sends an ASCII A (byte of value 65) on startup and repeats that until it gets a serial response from the computer.
Then it sends three…... Listed under: Interfacing(USB – RS232 – I2c -ISP) Projects, Projects

471. Arduino Based Egg Plotter

An Egg plotter is an art robot that can draw on spherical shaped objects such as eggs. You could also use this machine to draw on
ping pong balls and golf balls. You can use your imagination with the designs you put on it, you…... Listed under: Other Projects

472. A Self-Contained Data Logging Anemometer

I love collecting and analyzing data.  I also love building electronic gadgets.  A year ago when I discovered the
Arduino products, I immediately thought, "I'd like to collect environmental data."  It was a windy day in Portland, OR, so I decided to capture wind data.…... Listed
under: Metering – Instrument Projects

473. How to Add an E-Ink Display to Your Project

Lots of projects involve monitoring of some kind of data, such as environmental data, often using an Arduino for
control. In my case, I wanted to monitor the salt level in my water softener. You might want to access the data over your home network,…... Listed under: Other
Projects

474. Calibrating sensor input using Arduino

This example demonstrates one techinque for calibrating sensor input. The Arduino takes sensor readings for five
seconds during the startup, and tracks the highest and lowest values it gets. These sensor readings during the first five seconds of the sketch execution define
the minimum and…... Listed under: Projects, Sensor – Transducer – Detector Projects

475. Arduino 4wd robot with ping sensor “J-Bot”

Experience Level: Intermediate (requires soldering) Time Required: 3-5 hours depending on experience J-BOT Kit  Jameco P/N
2140285 Someone mentioned that Jameco needed a robotic mascot. I have always been a tinkerer, especially with radio-controlled electronics and so I
volunteered for the chance to design…... Listed under: Ideas, Robotics – Automation Project Ideas

476. Touch Sensitive Interactive Music Instrument DIY / OSX Version

“Sensor Retouch” touch sensitive interactive instrument which allows to play Water, Fruit, Plants
and Conductive surfaces as a musical instrument by your touch. All you need is Arduino and few upgraded touch sensitive sensors, i’ll teach you how to put
together everything and let start…... Listed under: Sensor – Transducer – Detector Projects

477. *duino Keg Temp Monitor, or the Quest for the Perfect Pint
I was looking for a project that combined my three favorite things - working in my shop, building

cool stuff for my bar and of course, drinking beer. After a couple of weeks in the old country drinking "the Guinness", I decided my I'd put a keg…... Listed under:
Temperature Measurement Projects
478. Arduino Fingerprint Lock
There is a short video for this Arduino fingerprint lock here:　http://v.youku.com/v_show/id_XNjIxNzQyNzY4.html I live in a small
apartment in Shenzhen with my wife and baby, 5 months old.  Sometimes, I need to go out, for example, to go downstairs to buy candy or diapers for my…...
Listed under: Security – Safety Projects

479. Electronic Connect Four (arduino)

Authors: Kelly Bodeman - kbodeman4@gmail.com Jack Whelan - whelanjack11@gmail.com (For more questions contact us at
our emails above) Here is a link of a youtube video of our project: Connect Four Video AcknowledgmentsCalifornia Maritime Academy (Marine Engineering
Technology) Professor Chang-Siu (ET370 Electronics) The Idea: Connect Four…... Listed under: Game – Entertainment Projects

480. SOCIAL DISTANCING INDICATOR

Social distancing indicator is used for many purpose . It is harmless and one of the social services. It will reduce the health
issues and society problems. Description SOCIAL DISTANCING INDICATOR DESCRIPTION:                        For the…... Listed under: Other Projects

481. ORP / pH / Temperature Data Logger

As a Water Quality professional working in the drinking water field, I know how important it is to accurately monitor the
disinfectant levels in the drinking water that gets served to the public.  Usually, that means taking weekly grab samples in the distribution system and…... Listed
under: Sensor – Transducer – Detector Project Ideas

482. Tobias – Arduino Music Box With TVout

First of all, let me introduce Tobias, my girlfriend's giant teddy bear, who is the inspiration for this project. Tobias has a
personality, built up over time while we jokingly wonder in our minds what he does while she's away at work. The project was…... Listed under: Sound – Audio
Projects

483. Arduino Cyclone Game

I have never played the real cyclone arcade game but I like the idea to play with our reaction time. I designed a miniaturized game. It
consists in 32 LEDs forming a circle, the LEDs lights up one by one as a led chaser. The…... Listed under: Game – Entertainment Projects

484. Portable Fine Particle Measurement

The objective of this project is to measure air quality by measuring the quantity of fine particles. Thanks to its portability, it
will be possible to carry out measurements at home or on the move. Air quality and fine particles: Particulate matter (PM) is generally…... Listed under:
Temperature Measurement Projects

485. Particle Photon IoT Personal Weather Station

Supplies Particle Photon[OPTIONAL] 2.4GHz u.FL antennaSparkFun OpenLogSparkFun Photon Weather
ShieldSparkFun Weather MetersDallas DS18B20 Waterproof Temperature SensorSparkFun Soil Moisture SensorSparkFun Qwiic VEML6075 UV Light Sensor3.5W
solar panelSparkFun Sunny BuddyCustom 3D Modelled Stevenson ScreenA soldering kitA bunch of single-core jumper wireA 2-pin screw terminalSome male
and female…... Listed under: Other Projects

486. Tetrahedral LED Hat (Deichkind Style) V1

Do you know the German music band Deichkind? Well, I am a big fan of them and have been to several concerts. As
part of their stage shows this band wears tetrahedral hats, full of LEDs. Already at the first concert more than 10 years ago…... Listed under: LED Projects

487. Power Timer With Arduino and Rotary Encoder

This Power Timer is based on the timer presented at: https://www.instructables.com/id/Timer-With-Arduin... A
power supply module and an SSR (solid state relay) were attached to it. Power loads of up to 1KW can be operated and with minimal changes the load power
can be increased. The…... Listed under: Clock – Timer Projects

488. Wall-e, an Obstacle Avoiding Robot

https://youtu.be/MDWsgSw9pog It's not Wall-e, But it looks like Wall-e a bit. In this Instructable, I'm going to show how you
can make a simple obstacle avoiding robot using Arduino in a very simple manner. learn to interface a servo motor and ultrasonic sensor with Arduino.…...
Listed under: Robotics – Automation Projects

489. TWO WHEELS CRAZY RC CAR

About two years ago, I carried out a project involving a 2 wheel self-balancing robot from broken toy car. After upgrading it to new version, this
broken toy car was left in my warehouse and I intended that someday I would make it operating again.…... Listed under: Other Projects

490. Non-Contact Hand Washing With LED Timer Displays

Washing should be done even without the presence of the COVID-19 pandemic. Appropriate washing can
prevent the transmission of diarrheal infections and other person-to-person illnesses. For personal health, it is quite useful to follow CDC guidelines on hand
washing whenever one returns from being out…... Listed under: LED Projects

491. Temperature Sensor for Arduino Applied for COVID 19

The temperature sensor for Arduino is a fundamental element when we want to measure the
temperature of a processor of the human body. The temperature sensor with Arduino must be in contact or close to receive and measure the heat level. That's
how thermometers work.…... Listed under: Sensor – Transducer – Detector Projects

492. Strive for Five: Arduino 5-Minute Classroom Exit Timer

Are you a teacher? Do your students leave your classroom and stay out too long? Are you tired of trying
to keep track of whether someone is out of the room and how long he/she has been out? If so, then the the Strive For…... Listed under: Clock – Timer Projects

493. LED Skateboard Rubiks Cube

This project uses LED lights controlled by an accelerometer and gyroscope to challenge your skateboarding creativity. The LED
lights change according to what trick is being performed. For example, a shuvit (180-degree yaw rotation) changes the lights blue. a kickflip (360-degree roll)
changes the color…... Listed under: Game – Entertainment Projects, LED Projects

494. DIY Non Contact IR Thermometer V1.0

Currently, we are chasing an invisible monster named Corona Virus ( COVID-19 ) and we are going through the biggest
health crisis in our time due to a sharp increase in infection cases. One of the main symptoms of the COVID-19 infected person is an increase in…... Listed
under: Temperature Measurement Projects 
495. Sonic Illustrations
Sonic Illustrations was technically born around 2013. Back then Istarted a little experiment in my bedroom which also served as my
workshop. I used the bass reflex speaker of my computer setup, put some clingwrap over it, poured some ecoline on the top of it,…... Listed under: Other
Projects

496. DIY Studio Light/ Light Box

Hey Everyone what's up. This is my DIY Studio Light Project https://youtu.be/AfNryfslxTc Which basically is a do-it-yourself studio light
that is made from a custom 3D Printed body and a custom PCB which were both provided by PCBWay. Question Is it better to Buy an…... Listed under: How To –
DIY – Projects

497. RoboCat: a Pet Without the Mess

This will not be a tutorial, just me reflecting on the process and sharing it! Welcome to RoboCat, a cute pet without the mess!
The RoboCat responds to any sounds above a certain range and if you press the red button you can give him…... Listed under: Robotics – Automation Projects

498. ITTT – Project Distance – Jurre De Groot 1D

HKU Assignment Hello all!Welcome to my HKU ITTT - "If This Than That" Project. For this assignment I created a
simple eye test. The Distance Measuring Eye will give you a score based on the distance away from the eye. In this Instructable I will show you my thought…...
Listed under: Temperature Measurement Projects

499. Multicolored Light-Up Countdown Timer for Studying

For this project, I wanted to make something that would aid me while studying, so I made a custom timer
to use for the Pomodoro Technique. This study technique involves allocating 25 minutes of uninterrupted focus to work/study, followed by a 5-minute break. I
wanted a…... Listed under: Clock – Timer Projects

500. Show CO2 Historical Level Curve With ESP32

Once I had made a project about the CO2 monitor that had such a problem. The displayed value changes too
frequently and fluctuates greatly, which makes it impossible for me to accurately judge the CO2 level. I have a point to make it better now—record…... Listed
under: Other Projects

501. Ultrasonic Mono Pulse Tracker

This project demonstrates the functioning of an "Ultrasonic Mono-pulse Tracker" built using two Grove ultrasonic sensors. Two
sensors facing forward at a small angle from each other are placed on a servo pedestal capable of rotating +/- 60 degrees based on commands from an Arduino
UNO…... Listed under: Other Projects

502. DIY Laser People Counter

Let's start of with a question: What is a people counter? .... Well, it is a device, that counts the amount of people passing by. They are
usually placed in doorways and can be used to see how many people are in a room or…... Listed under: How To – DIY – Projects

503. Low-tech and High-tech POV (Persistence of Vision)

Persistence of vision is an optical illusion. When we look at an object, our eyes keep seeing an image of it for
a fraction of a second after the object is removed. If several images appear quickly after each other, they seem to merge. My…... Listed under: Other Projects

504. Contactless Switchboard

https://youtu.be/o9go2oERWaQ This is a prototype version of the contactless switchboard which helps to control the appliances (AC
appliances can be controlled through relays) without touching the actual switches. This can be used in public places like malls, hospitals, etc. In this pandemic
time such device…... Listed under: LED Projects

505. AUTOMATIC WATER TAP

Greetings everybody! We hope you are in good health. In this Instructable, we will be converting a manual water tap into an automatic
one using an Arduino. We will use an Infrared sensor to detect the presence of a human hand and a solenoid valve…... Listed under: Other Projects

506. Bidirectional Zoom Mute Button

https://youtu.be/tfPAHNXUp20 We're spending the majority of our time on Zoom today, and yet we still keep forgetting to
mute/unmute and embarrassing ourselves. Sure, the Zoom UI is far from perfect, but as makers, we should be solving our own problems ourselves instead of
blaming it…... Listed under: How To – DIY – Projects

507. Personalized Professional Weather Station DIY, LineaMeteoStazione V2.0! Using EZSBC Boards ESP32, ESP8266, Attiny85
LineaMeteoStazione, in the improved
version, is a complete weather station solar powered which can be interfaced with professional sensors from Sensirion as well as some Davis Instrument
component (Rain Gauge, Anemometer) It also can be interfaced with a less expensive set of anemometer and rain…... Listed under: How To – DIY – Projects

508. Tunnel Book With Pinoo

https://youtu.be/nxLPUPADWy0 Purpose of the Project: Creating a tunnel book with a light sensor (LDR) and led module using the
Pinoo Control Card. Duration: 2 lessons Age Group: 7 years and older Set Used: Pinoo Basic Set Benefits: • Learns to code Pinoo control card • Learns to code
the…... Listed under: Sound – Audio Project Ideas

509. Zoetrope With Pinoo

https://youtu.be/sIY7vYLaDoo Purpose of the Project: To create a Zoetrope system with the button module and DC motor using the Pinoo
control card. Duration: 2 lessons Age Group: 9 years and older Set Used: Pinoo Full Set Benefits: • Learns to code Pinoo control card • Learns to code the…...
Listed under: Sound – Audio Project Ideas

510. Arduino/Unity Car Driving Experience

Idea behind project Hi, I am a 12-year-old kid who loves electronics, coding, space, and building. I remember, on my 10th
birthday, I began sitting in the front seat of our car, and I loved it. Not only did I not get car sick, but…... Listed under: Car Projects

511. Contact Digital Thermometer With Deep Sleep [Attiny85]

This might seem totally useless, considering how advance current technology can be and you might
even be like "Tsk! a Thermometer?" But there is a lot of experiment based on temperature (water temperature, room temperature, etc) so digital thermometer
becomes a key instrument for temperature…... Listed under: Temperature Measurement Projects

512. Hack Wrist Watch LCD With Arduino || D-type LCD || Arduino Digital Watch|| Vishal Soni
https://youtu.be/_lHsXlv9sZ8 Please subscribe to my YouTube
channel. In this tutorial we will hack our old school digital watch which is no longer working now. So let's fix the watch Control it's LCD display which is known as
D-type LCD display. Step 1: Open the Watch Take the…... Listed under: Clock – Timer Projects

513. Automatic Soap Dispenser With Hand Wash Timer

This project I wanted to build a better and more full-featured version of my present automatic soap
dispenser. Automatic Soap Dispenser V1.0 This one can be improved a lot, and you left excellent suggestions in the video comments which I would like to
incorporate in…... Listed under: Clock – Timer Projects

514. Improved Artwork Clock

Want to improved some piece of artwork? Surprise your friends by showing day time through it! You will find in this instructables the
way of making the same clock I did, it can totally be improved with strip leds, 3d printed supports, painting skill and…... Listed under: Clock – Timer Projects

515. SIMON SAYS BOX

Authors: Jackelyn Garcia- JGarcia8710@csum.edu Hector Villalobos- HVillalobos7936@csum.edu Allan Hambly- AHambly1472@csum.edu (For
more questions contact us at our emails above) Here is the YouTube video for our project: https://youtu.be/_aWlVS0qf_Q Acknowledgements: California
Maritime Academy (ET Department) Professor Chang-Siu Erin Cole Gage Sturgeon Jack Whelan The Idea: The…... Listed under: LCD Projects

516. IMU Controlled LED Cube (Simon Says)

Authors: Bella Lax Tianle Zhai Alex Clark With Help and Thanks To: Professor Chang-Siu (ET-370) Professor Clyatt (ET-
370L) Erin Cole Cal Maritime Project Abstract: This new take on the classic Simon Says game utilized a motion processing unit and the six faces of a cube…...
Listed under: LED Projects

517. Gesture Sensing E-textiles

After playing around with Freetouch to make a knitted fabric switch, it was found that the sensor reading varied depending on the
type of interactions. For example, prodding the fabric resulted in a much lower sensor reading than grabbing the fabric. Based on this observation,…... Listed
under: Sensor – Transducer – Detector Projects

518. Stone-Paper-Scissors Game With Pinoo

https://youtu.be/J32Z-YdQCFs Purpose of the Project: Creating a rock-paper-scissors game with a servo motor module,
joystick module, module with lcd (I2c) and distance sensor using the Pinoo control card. Duration: 2 lessons Age Group: 7 years and older Pinoo Set: Maker Set,
Full Set. Benefits: • Learns to code Pinoo…... Listed under: Game – Entertainment Projects

519. Memory Lamp

[ Intro ] This product can you a way to keep your memory in a self-made frame, combining with a lamb decorated by yourself, increasing the
visibility and exposure of the image being kept in the memory lamp, creating your own unique memory. Features of…... Listed under: Memory – Storage Project
Ideas

520. Glowing Garden

For this project, I wanted to create an interaction that would seamlessly combine the natural and the digital to make a cohesive project which
sparked wondering and curiosity. I was inspired by the idea of a fairy garden and wanted to make a plant that…... Listed under: Sensor – Transducer – Detector
Projects

521. DIY Robot Head Made Out of RGB LED Lights

In this instructable, you will be taught how to make a decorative robot head light by using RGB LED lights to create
a visual effect in the robot's mouth, the lights can shine brightly colored rainbow lights back and forth, almost as if the robot…... Listed under: Robotics –
Automation Projects

522. Simple Arcade Button Ideas for Your Projects

One thing that I've always needed for my projects is a simple form of input and output. At first, it was a simple
push button and an led on a breadboard. The breadboard mounted buttons are inconvenient. So I created a 3D printed stand to…... Listed under: Ideas

523. Social Distancing Robot

This instructable was created in fulfillment of the project requirement of the Make course at the University of South Florida
(www.makecourse.com). The Social Distancing Robot is a robot concerned with its health in the midst of the current pandemic. It has an RGB LED to…... Listed
under: Robotics – Automation Projects

524. Kid’s Control Panel With Arduino(s)

Since getting an Arduino starter kit I was wondering what to make of all those fancy buttons, shiny LEDs, touchscreen LCD
displays... I was thinking about weather station, but I was told that in the maker's world, weather station is like a "Hello World" app.…... Listed under: Other
Projects

525. COVID-safe Useless Box

This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida
(www.makecourse.com) Supplies One (1) Arduino Uno One (1) Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685 Two (2) MG995 Metal
Gear Servo One (1)…... Listed under: Security – Safety Projects


526. Measuring the Boiling Point of Liquefied Gases Using Arduino and PhyPhox
A substance that is in a liquid state is constantly evaporating or passing into the gaseous state
(depending on the intermolecular forces and temperature). The pressure exerted by the gaseous molecules produced in this process is known as vapor pressure. The vapor
 pressure depends on…... Listed under: Temperature Measurement Projects

527. A Shuttle Mission Control Mock-Up for Kids

A Mission Control Center for children was constructed to manage a pretend launch of the space shuttle. I wanted to
play-out the make believe mission with nothing but LED lamps to tell the story; both 7-segment displays and graphic displays with LED lights strategically
mounted.…... Listed under: Other Projects

528. ESP32 CAM WEB Server and Getting Started Guide

This Instructables is all about setting up ESP32 CAM Webserver. The goal here is to connect ESP32 CAM with FTDI Module and
program it with the CAM WEB SERVER sketch which will allow us to monitor the camera feed via a web app. The Next…... Listed under: Video – Camera – Imaging Projects

529. Tom the Tortoise Thief

I had 8 small and really old servos, as well as an ESP32 that was soldered onto a copper stripboard. I therefore decided to make a walking
quadruped that would have something sticky on it's stomach, allowing it to pick things up secretly when it…... Listed under: Other Projects

530. Wizard Chess

Wizard Chess is a form of chess originally invented by J.K. Rowling in Harry Potter and the Sorcerer's Stone. The characters give verbal commands
to the chess pieces and they move by magic. Seems impossible right? Not anymore! Using an Arduino Uno, along with an XY…... Listed under: Game –
Entertainment Projects

531. Machine Learning With the Arduino: Air Quality Prediction Learning With the Arduino: Air Quality Prediction
Air Quality Prediction is a project that balances
Arduino development and Machine Learning. I have always found the world of machine learning captivating but was never able to run models on real-time
data. Arduinos provide the solution with a vast array of sensors supported on…... Listed under: Sensor – Transducer – Detector Projects

532. DIY Solar Panel Monitoring System – V1.0

A few months back, I have installed a small-scale Off-Grid Solar System. I am always very curious to see the
performance of my solar PV system, and the good news is that the charge controller that I am using has its own local display for…... Listed under: How To – DIY –
Projects

533. Useless Box

Interested in making a useless box? Building this project was a really fun experience for me. Having very little prior knowledge about circuits,
making this simple gadget was a great introduction to circuits for me. And, it's really fun to play with once completed! This…... Listed under: Motor Projects

534. Neo Pixel Tic Tac Toe (Arduino Uno)

Tic Tac Toe is a two player game in which the players compete to get 3 pieces in a row. In this project we constructed a Tic
Tac Toe game using a number pad and neo pixels as pieces. This results in a portable Tic…... Listed under: LED Projects

535. Party’s Over!

This is a little diorama made with Arduino for a school project. What happens is a party which just stops playing music. As the sound stops there's
a bright light which turns on. There are two partypeople. One is having a stroke or something because…... Listed under: LED Projects

536. Remote Smoke Alarm Buzzer & Microcontroller Interface

Add a remote buzzer to Smoke Alarms that are too far away be heard. Also add an optional
Microcontroller interface e.g. Arduino. This document describes how to: Modify an escape-light type smoke alarm to sound a remote buzzerCreate the buzzer
moduleCreate a microcontroller alarm interface…... Listed under: Battery Projects

537. The CelloBot (Robot Design Controlled by an Arduino Uno)

Hello, I'm Andre and this is how you can build and design your own robot with dancing features. This
robot was designed as a team project for my junior design class at Georgia Tech. The entire system is completely controlled by an Arduino Uno
microcontroller,…... Listed under: Robotics – Automation Projects

538. DIY Arduino Smart Digital Scale | ESP8266 + HX711

Hello to everyone, today I am here to show you a very insteresting project that I was working on for a while,
it consists on a digital scale using the ESP-12S microcontroller plus a load cell and it HX711 wheatstone bridge to i2c converter, it…... Listed under: How To – DIY
– Projects

539. Wearing Your Heart on Your Sleeve

There are many smart devices available to us that are able to detect our heart rate and other bio data by using a method
called photoplethysmography (PPG), a concept of how blood is able to reflect red light while absorbing green light. The device can…... Listed under: Sensor –
Transducer – Detector Projects

540. Pulse Oximeter and Heart Rate Monitor

Arduinos are incredibly useful tools for all sorts of projects. Given the current COVID-19 pandemic, having easy, fast,
cheap, and reliable access to health information is more important than ever. While an Arduino might not be the tool of choice for proper medical applications,
we…... Listed under: Other Projects


541. Chore Tracker
Chore Tracker is a device used to help motivate you to do your chores, and manage your time. Each week, Chore Tracker gives you a goal to complete five chores
of your choice. It will set a timer for you to stay on track and…... Listed under: Other Projects

542. STONE HMI and Arduino + Physical Therapy Instrument

Today is Friday, January 29, 2021, control of the COVID-19 in Beijing is also promoting the "New Year in
place", family said the Spring Festival can not visit each other, or each person is fined 1500. It seems to go out as little as possible,…... Listed under: Metering –
Instrument Projects

543. Don’t Make Me Choose – a Randomized Light Wheel

So much of our lives is spent making choices. Cut down on that time by making your own "Don't Make Me
Choose" project. This project uses the lights on a Circuit Playground to point to a specific item you have listed on the whiteboard. This…... Listed under: Arduino
Battery Project Ideas

544. Resistive/Capacitive Sensing Tester (For E-textiles Soft Sensors and More)
A handy-dandy portable device for testing e-textile sensors on the fly. Sometimes your
electronics workspace and your textiles workspace are not the same places. You want to make multiple samples and test them, but then you have to carry your
whole electronics prototyping kit (laptop,…... Listed under: Sensor – Transducer – Detector Projects

545. Over Engineered True Random Value Generator

Random numbers are often used in daily for example in encryption, gambling, gaming and much more. These
numbers are generated by computers using complex algorithm but it can be predicated if we know the seed value and the algorithm. So this is my attempt
to…... Listed under: Other Projects

546. IoT Temperature and Humidity Sensors

About a year ago, I felt like some rooms in my house were colder than other ones. I wanted to check for sure, so I built a
few temperature and humidity sensors connected to my phone via wifi, and dispersed them in my house. I…... Listed under: Temperature Measurement
Projects

547. Automate Push Up Routine With ESP8266

For most of us during lock down, we have been practicing a lot of exercises. Either its some stretching or some muscle
building exercises. But one issue that I have faced personally is keeping track of my workouts. I was unable to see my progress…... Listed under: Other Projects

548. Smartphone LED Controller Using Bluetooth With Own Application

Hello friends welcome back to "Techno-E-Solution" In this video I'll be going to show you an
interesting project "Smartphone controlled LED Using Arduino & Bluetooth with Own developed Application", I developed this application on kodular app
making platform. In this project, we control the LED…... Listed under: Phone Projects

549. DIY Wireless Pi Table Decor

Going through the Instructables website, I came across this fascinating "Pi Day Speed Challenge" contest. I decided to take part in
the contest, as a challenge to myself of how creative and innovative can I be. As I'm not good as a cook, I did…... Listed under: How To – DIY – Projects

550. Getting Started With ESP-MESH and 8266 -8266

Introduction ESP-MESH is a networking protocol built on the top of the Wi-Fi protocol. ESP-MESH allows
numerous devices (generally referred as nodes) spread over a large physical area to be interconnected under a single WLAN. ESP-MESH allows multiple nodes
to communicate with each other under…... Listed under: Other Projects

551. Make Your Own Arduino AC Dimmer | Drive Motors & Lights
Hi every one, here Chris, and I want to show you how I made my own Arduino AC dimmer that can
control AC loads such as motors and lights easily. It has the power to handle 1200+ Watts and It's a very nice project for…... Listed under: Motor Projects

552. Never Lose Your Phone Again

Who hasn't ever left his phone on a spot and realised they had lost it too late? Anonimoconhache present you the solution: Don't
Lose Me. With this amazing gadget you will never lose your phone again. Whenever you are too far away from your phone…... Listed under: Phone Projects

553. RC Strandbeest
{This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida
(www.makecourse.com).} Inspired by the Wind powered machines built by "Theo Janse" I've come up with a design of my own, but with a twist. This design…...
Listed under: Motor Projects

554. Open Grow Light

Exactly a year ago (February 2020), James’ wife wanted to expand her plant growing setup in the house. This included a bigger, larger, taller
plant growing area AND the need for more lighting. BINGO! The seed for the Idea was planted. After an exhaustive market…... Listed under: LED Projects

555. Predator Count Down Box

This is a count down timer with some flair! This project was made as part of an assignment for an online engineering course. The purpose was
a timer with a set time which would then prompt the user to some action. The timer…... Listed under: Other Projects

556. Carnival Lights Game

Welcome to an Arduino beginner project. It's a simplification of my previous instructable; it's designed to be easier to reproduce. This is a
timing minigame where the active light moves back and forth across a row of lights in order. When the button is pressed the…... Listed under: Game –
Entertainment Projects

557. Toy Camera Using ESP32 + OV2640 Camera and 3.5″ TFT Touchscreen
https://youtu.be/G_ur5BdAAoE This project is for educational purposes. I made this for
teaching engineering classes for my kids. It helps to describes how the camera works. It consists of three main parts : Brain : the microcontrollerInput : camera
moduleOutput : TFT display That parts are…... Listed under: Video – Camera – Imaging Projects

558. Ultrasonic Occupancy Counter (2-way)

https://youtu.be/Ncsu_gZS-qI This simple Arduino project can be placed in the doorway of a shop or other venue to count
the number of people inside. Limiting the number of people inside a space can help to maintain social distancing. A demonstration of this project can be…...
Listed under: Other Projects

559. Automatic Arduino Pet Feeder – 3D Printed (With Stepper Motor)

Hi guys, I made an automatic 3D Printed Pet Feeder (or just dispenser, but I use it to feed my
dog). I 3D modelled all that project. U can print it by yourself. All parts are down there. Basically how it works, is u type…... Listed under: Motor Projects

560. How to Make Smart Obstacle Avoiding Robot Using Arduino Uno
https://youtu.be/tnwTlMyOL_8 Hi guys. In this instructable, I will teach you how to build an
obstacle avoiding robot. The robot will be a small and simple 2-wheeled car which will move forward until it detects an obstacle in its path. Upon doing so, it will
stop,…... Listed under: Other Projects

561. Tree Tidy – a Functional Desktop Decoration (Prototype Build)

Everyone loves a good desktop decoration. We can also agree that keeping our desks clean is
great. So why not combine both? In this Instructable I'll show you how to make a desktop item that combines aesthetics and cleanliness to create (in my very
biased…... Listed under: Other Projects

562. Arduino Basics With Night Light

Recently I have been playing around with Arduino. Arduino is really cool and is a great way to learn electronics. In this
Instructable I will teach you the basics of Arduino including: LED'sButtonsPotentiometersResistorsTinkercadAnd a project with this knowledge. Step 1: The
Board The controller can…... Listed under: LED Projects

563. Flappy Bird Game Using Arduino & LCD Display

Hello friends welcome back to "Techno-E-solution" in this article I'll show you how to make "Flappy bird game
using arduino Uno & LCD display". This is beginners level project, if board at home & if you want fun with arduino let's make this game. This…... Listed under:
Game – Entertainment Projects

564. Solar Powered WiFi Weather Station V3.0

In this Instructable, we will learn how to make a Solar-powered wireless weather station by using an ESP32 Wifi
Module and few common weather sensors available in the market. The weather station is fully solar-powered, so no need to worry about the external power
supply.…... Listed under: Wifi - WLan Projects

565. Automatic Arduino Powered Camera Slider With Pan and Tilt
Are you fed up of shaky footage that ruins your video? In this Instructable I attempt to address this
issue by building my own automated camera slider. I used the power of CAD and digital fabrication to create a robust gantry system that rolls along…... Listed
under: Arduino Video – Camera – Imaging Project Ideas

566. Visualizing Chaos With the Double Pendulum

We enjoy having an ordered, methodical and efficient lifestyle, however, more recently we have acquired a taste
for the disorganized, topsy-turvy, chaotic lifestyle. Which is why, in this Instructable we attempt to address our new found love for chaos by building a simple
machine to…... Listed under: Other Projects

567. Automatic Toilet Flusher (Reduce Touch, Reduce COVID-19 Infection)

The place most of us like to see a hands-free toilet flusher is in public washrooms. It will be
a welcome convenience – no-one wants to touch a public toilet! In this COVID-19 pandemic touching the flush button in a public toilet is risky also…... Listed
under: Security – Safety Projects

568. Open Theremin From Scratch: Building a PCB From Open Source Plans
https://youtu.be/CKgfZY-ZhTc This Instructable shows the steps I took to build my own open source
theremin (Open Theremin) when there was none available to buy online. The lovely thing about open source is that the plans are freely available to make and
modify. A theremin is…... Listed under: Other Projects

569. JCB Machine

JCB Machine is very popular because it is heavy-duty construction equipment in the civil industry. JCB is also known as the backhoe loader. It can
be used to load or unload the trucks very quickly. It is used for the construction of roads, loading and…... Listed under: CNC Machines Projects

570. Portable Portrait Painter

Introduction There are probably over one-hundred Arduino based plotting machines on the internet with instructions available on how
to make them. What makes this one unique (as far as I know), is the inbuilt camera and screen. Other plotters must be connected to a computer.…... Listed
under: Other Projects

571. Automatic Missile Defence System

Automatic Missile Defence System destroys aerial targets like aircraft, high-altitude ballistic missiles, and low-altitude cruise
missiles. Missile defense systems are really important for a nation like India which is surrounded by hostile neighbors. A Surface to Air missile is a very high
speed ( 2-4…... Listed under: Security – Safety Projects


572. Let Your Plant Talk
In Today's Tutorial, we will learn how to make our plant talk using Arduino nano with the MP3 player module. Basically, we will connect 3 sensors to the
Arduino module: LDR Sensor. Capacitive Moisture sensor. DHT22 Temperature and humidity sensor. We will read the sensors…... Listed under: Other Projects
573. How to Teach an Online Circuits Class With Tinkercad
https://youtu.be/50l3fREv0Qo You probably know Tinkercad for the beginner friendly 3D CAD program,
but it also includes a circuit + Arduino simulator that runs in your web browser! I've used Tinkercad for both in-person and online college-level classes and for
introductory makerspace workshops. In this Instructable I'll not only…... Listed under: Other Projects

574. Portable Auto Height Adjust Stand for Multipurpose

Height is a major concern in public places. Kids affected more in public places due to height problem. The
problem places due to height concerns are 1) First place is school from kg kids to High school kids, so lot of height variation so using…... Listed under: Other
Projects

575. Timer With TM1637 and Arduino

This timer is useful in both domestic and industrial applications. It is a countdown timer programmable in the range of 1s ....
9999s. During this time, the load is powered by a relay on the board. For repeated timings, it is possible to memorize the…... Listed under: Clock – Timer Projects

576. Smart Pull-Up Bar

Hello friends! My name is Nikolas and I am 15 years old. Today in this Instructable I'll show you how to make a Smart Pull-Up Bar which, when
you start doing Pull-Ups or Chin-Ups starts playing music in order to keep you motivated and after exercising for…... Listed under: Other Projects

577. Autonomous Basil Farm With Robot Arm!

Growing basil is great, but do you know what's even better? Having an autonomous basil farm! As the saying goes:
"never spend ten minutes doing something by hand, when you could spend 10 hours failing to automate it". Although I may be bad at gardening,…... Listed
under: Robotics – Automation Projects

578. STOP Face Touching Device

Why do you want to stop touching since it is part of our human nature? Well, it is all because of the virus floating around. Health
officials keep telling the public to stop touching faces when they couldn't help. So I decided to use some technology to…... Listed under: Sensor – Transducer –
Detector Projects

579. DIY Game Controller

Hey everyone what's up... so this is my DIY Game controller. It uses an Arduino Pro Micro which runs with HID Function, this is actually the
second version of my previous game controller which had buttons but this one has two joysticks. unlike the previous…... Listed under: Game – Entertainment
Projects

580. ECG Display With Arduino

This ECG (Electrocardiogram) unit has an integrated display. The display can show individual heart beats in a large format, the train of
heart beats in a small format and a Poincaré plot. It is battery powered and can be worn round your neck on a lanyard. It…... Listed under: Other Projects

581. Ez Arduino 12 DOF Quadruped Robot – Robot Dog Lassie

Since Boston Dynamics releases the quadruped robot - Spot, making robot dog has been very popular.
There are number of attempts to build similar robot. Most are expensive and very difficult to follow and to make one. This instructable is trying to deliever a
DIY…... Listed under: Robotics – Automation Projects

582. Making an Alarm Clock That Asks Questions Randomly

Do you usually have trouble getting up? Set more than a dozen alarm clocks in the morning, but still can't wake up and
turn them off in a daze. When you waking up and find out that you are late, and then you blame the…... Listed under: Clock – Timer Projects

583. TClock – Tissue Box Clock

In this Instructable I will show you how you can convert an empty tissue box into a cool Arduino based clock that can show the time,
date, current temperature & humidity in the room. If you like this Instructable consider voting for it in theTrash…... Listed under: Clock – Timer Projects

584. Arduino LED Night Lights With Switch to Turn on and Off
The design was inspired by a product that is also presented on Instructable called "Arduino Basics with
Night Light" (https://www.instructables.com/Arduino-Basics-With-...). Originally, the device is only allowed to change the LED lights by pushing down a button;
after adding the codes and circuits (added: a speaker…... Listed under: LED Projects

585. Wireless Mood Meter

Suppose your mood changes so fast that people can't cope up with it. You feel sad but people do something that makes you more sad. If
only they knew what you are feeling right now!Behold, I present you the Wireless Mood Swing Meter!! Place it…... Listed under: Metering – Instrument Projects

586. Arduino 8 Key Tinfoil Piano

In this Instructables tutorial, I will teach you how to make a simple 8 key piano with your Arduino. Supplies: Arduino
BoardBreadboard10MΩ Resistor*8Arduino mini box speakerWires/JumpersTapeCardboardTinfoil(optional) Hot glue gun Step 1: Gather Supplies Here is what
you'll need: Arduino BoardBreadboard10MΩ Resistor*8 (1MΩ Resistors work too)Arduino…... Listed under: Sound – Audio Project Ideas

587. Arduino Snake LED Game

In a previous project we created an interactive coffee table, which lit up leds under an object. In this project, we reuse that table to
create a snake game from the 2D matrix of LEDs. If some parts of the project are unclear, it may be…... Listed under: Game – Entertainment Project Ideas

588. Delayed Dog Feeder

For our second project, I wanted to make something that I am going to be able to use in my day to day life. When I have to leave during
awkward mealtime hours, it's important for my dog to maintain a consistent eating schedule, and…... Listed under: Other Projects

589. Arduino Volume Control
ArduinoUNO with volume control, pause/play button, and LCD display: This tutorial will show you how to set up an arduinoUNO to
produce a tone through standard earphones, with volume control via potentiometer, with visual volume display via LCD, with pause/play button. Step 1: Pieces,
Parts…... Listed under: Other Projects

590. Arduino Cyclone Reaction Time Game

In this instructable, we walk through how I made a "Cyclone" - type arcade game using an Arduino. This game also
includes a reaction timer mode. Let's get started! A list of things you will need: Arduino UnoLCD ScreenMCP23017 serial port expander2 pushbuttonsLEDs of
differing…... Listed under: Game – Entertainment Projects

591. SafeT-Park System

This device will help protect parking structures by implementing three safety concepts into an IOT device. Automated emergency response
system, in the case of parking structure fires Integrated temperature and altitude sensor to pinpoint the location of the fire Activated pressure system to
mitigate radiation…... Listed under: Other Projects

592. Arduino Home Irrigation System With a 7 Segment Display

https://youtu.be/Iu4rbQRmRWo In this instructable we are building a home irrigation system based
on an arduino uno. I know there are tons of similiar projects / tutorials already floating the web, but maybe I did something different and you can pick up an
idea or two.…... Listed under: Irrigation Projects

593. Alone Together – Plant Lamps

This instructable is part of the course Physical Interaction and Realization at KTH, Royal Institute of Technology. We are going to
teach you how to build two, quite organic and interactive plant-lamps, Thorulf and Svamp. Thorulf is a plant with flex sensors and LEDs while Svamp is a
collection of mushrooms…... Listed under: Sensor – Transducer – Detector Projects

594. Blink an LED With Arduino in Tinkercad

https://youtu.be/yyG0koj9nNY Let's learn how to blink an LED (light emitting diode) using Arduino’s digital output. If
you’re new to Arduino, this is a great place to start. We'll connect an LED to the Arduino Uno and compose a simple program to turn the LED on…... Listed under:
LCD Projects

595. SMS Monitor || Dot Matrix Display || MAX7219 || SIM800L

In this video, you will learn how to use a GSM module, dot matrix display and how to display
scrolling text on it. After that we will combine them together to display messages received over a GSM SIM to a dot matrix display. It is…... Listed under: Other
Projects

596. Premiere Pro Edit Dial Controller (Seek / Play / Pause) ($6 DIY)
https://youtu.be/FACm5D3bskQ Update!!! New version is here!! I’m really into making Youtube
videos for Instructables. Sometimes it is hard to rewind the moment I wanted to pause. So, I thought it would be nice if I had a dial for it. [ Instruction ]
Manual https://eunchan.me/PREMIERE-PRO-CONTROLLER-DIAL-DI... Source Code https://github.com/happythingsmaker/PremiereProDi...…... Listed under: How
To – DIY – Projects

597. Arduino RFID Lock Tutorial

Dear friends welcome to another Instructable. This is Nick from educ8s.tv and today we are going to learn how to use this RFID Reader with Ar
in order to build a simple lock system. For the first time, we are going to use RFID tags…... Listed under: RFID - NFC projects

598. 6WD Shock Absorption Robot for Arduino

The new design of the 6WD mobile platform, the vehicle uses 2mm aluminum alloy, aluminum spray surface
treatment. 6 high-speed DC motor (original 17000 rpm), with 1:34 full metal gear box, so that the car to obtain strong off-road performance. Shock absorption
design is the…... Listed under: Robotics – Automation Projects

599. Automated LEGO BB-8!

We absolutely LOVE the new LEGO Star Wars sets that have come out over the last couple of years. They're well designed, fun to build,
and look great. What would make them even more fun is if they also moved on their own! We took…... Listed under: Robotics – Automation Projects

600. Arduino RC Car Wheel

This is an Instructable of my Arduino RC car Wheel in which I took a cheap RCcar and made it so the Arduino could act as a wheel,
controlling the direction it goes automatically. The Arduino RC car Wheel is my first original Arduino design…... Listed under: Car Projects

601. Arduino Based CNC Plotter Made From Scrap DVD/CD Drives
Indeed, the world of web has quad trillion tons of information but when you want to build
anything you need all the intricate little details. There are already a number of good DIYs, Tutorials and YouTube videos on the topic but I was unable to…...
Listed under: CNC Machines Projects

602. Arduino Based USB Paper Gesture Mouse

Please vote for me in the conests I have always been pretty amazed by the Capacitive sensor library of Arduino, It
makes me feel like a super human, I can make any non conductive material to act like a touch enabled controller for various use…... Listed under:
Interfacing(USB – RS232 – I2c -ISP) Projects

603. A Pocket Sized Touch Keyboard

In this Instructables I am going to explain about my new project called " A Pocket Sized Touch Keyboard" .It is a Arduino based
small physical device used to simplify your different keyboard operations.You plugs it into your computer usb port and touch it on…... Listed under: Sensor –
Transducer – Detector Projects

604. Cardboard Spider (DIY Quadruped)

Hello again and welcome to my new project. In this instructable I’ve tried to make a simple Quadruped made from materials
accessible to everybody. I know to get a good looking final product you need a 3d printer and maybe a CNC, but not everybody…... Listed under: How To – DIY –
Projects

605. Fake Dynamic Price Tag

Amazon's prices change constantly. If you leave items in your shopping cart for longer than a few hours, you'll likely get alerted about
minute fluctuations – $0.10 here, $2.04 there. Amazon and its merchants are obviously using some form of algorithmic pricing to squeeze the…... Listed under:
Other Projects


606. Coke Machine Can Level Detector
Rev 2.5 - tidied up the 3D printed parts and updated the plug connector to a common PCB unit. Rev 2 - ultrasonic "button"
replaces manual push-button. Pushing a button is so old fashion, particularly when I'm already using an Ultrasonic sensor. Why not use…... Listed under: CNC
Machines Projects

607. Desktop CT and 3D Scanner With Arduino

Computed tomography (CT) or computed axial tomography (CAT) is most often associated with imaging the body
because it enables clinicians to see the anatomical structure inside the patient without having to do any surgery. To image inside the human body, a CT scanner
requires X-rays…... Listed under: Other Projects

608. Arduino Pong Clock With Temperature and Timer

In Pong clock mode the clock uses the classic video game Pong to tell the time The 2 players automatically win
and lose so their scores show the hours and minutes. It is based on a clock by Nick Hall. This is the 2nd version of…... Listed under: Clock – Timer Projects

609. Line Follower Robot – Arduino Mega/uno – Very Fast Using Port Manipulation
Line follower robot is a useful robot that is used in ware houses, industries, and
stores etc, where it follows a dedicated path. The presented robot captures line position with IR Sensors. If the robot get off the line it will U turn and back to the
line…... Listed under: Robotics – Automation Projects

610. Robotic Hand With Wireless Glove Controlled | NRF24L01+ | Arduino

In this video; 3D robot hand assembly, servo control, flex sensor control, wireless control
with nRF24L01, Arduino receiver and transmitter source code are available. In short, in this project we will learn how to control a robot hand with a wireless
glove. Step 1: Video…... Listed under: Robotics – Automation Projects

611. DIY Digital Spirit Level

In this project we will have a closer look at accelerometer ICs and find out how we can use them with an Arduino. Afterwards we will
combine such an IC with a couple of complementary components and a 3D printed enclosure in order to create…... Listed under: Other Projects

612. The Ultimate DIY Automatic Fish Feeder Tier 2

The Tier 2 Feeder is a big step up from the Tier 1. This version uses an ESP8266 wifi module to sync the arduino's
clock to control the feeding schedule and the tank's lighting. Step 1: What You Will Need: Everything in Tier 1 except the…... Listed under: Other Projects

613. Eve, the Arduino Chatbot

Hello DIYrs, have there been instances when you really wanted to share your feelings with someone and no trusted one was around?
In today's busy world, this is a common instance. Well, a chatbot can help here to make you feel better. And that leads…... Listed under: Arduino Programmer
Projects

614. Arduino Powered Dog Food Dispenser

If your house is anything like mine, some tasks may be forgotten when in a rush. Don't let it be your pet that gets
forgotten about! This automated dog food dispenser uses an Arduino to deliver the right amount of kibble at the right time.…... Listed under: Projects

615. Multiple LEDs & Breadboards With Arduino in Tinkercad

https://youtu.be/MojSo7OtF9w Let's learn how to control multiple LEDs using Arduino’s digital outputs
and a breadboard. Expanding upon the last lesson on blinking an LED, We'll connect some LEDs to the Arduino Uno and compose a simple program to light
them up in a pattern. You can…... Listed under: LED Projects

616. Getting Started With Arduino: What You Need to Know

I have been working with Arduino and electronics for many years now, and I am still learning. In this ever-
expanding world of micro-controllers, it is easy to get lost and run circles around yourself trying to find information. In this Instructable, I will be showing…...
Listed under: Other Projects

617. Minimalist IoT Clock (using ESP8266, Adafruit.io, IFTTT, and Arduino IDE)
In this tutorial I show how you can make a minimalist clock synchronized with the
internet. I tested it with two different ESP8266 based boards: Firebeetle and NodeMCU. The microcontroller gets current time from a Google server, and
displays it on a NeoPixel LED ring.…... Listed under: Clock – Timer Projects

618. YouTube Subscriber Counter With LEDs

This is a YouTube Subscriber counter built with an ESP8266. It uses the YouTube apiv3 to poll for changes. It's made
specifically for one of my favourite youtubers Henk Rijckaert. It was featured in his livestream where the goal was to get to 9000 subscribers.
https://youtu.be/6b43IbccmZ0…... Listed under: LED Projects

619. Acoustic Levitator Case

Acoustic levitator from Asier Marzo is a very popular thing here on instructables. I build it, it was working but I noticed couple of issues.
For example: The 3D printed space between bowls is a bit fragile.The levitator can't stand on its own because of…... Listed under: Other Projects

620. DIY Attiny Programming Shield

If you are looking for a small and low powered Arduino board the Attiny is a really good option, its surprisingly featureful for it's
size. It has 5 GPIO pins, 3 of which are Analog pins and 2 which have PWM output. It is also…... Listed under: Arduino Programmer Projects

621. Knife Sharpening Angle Coach With Bluetooth & Arduino

Precision sharpening skills aren't developed overnight! Here's a high-tech way to monitor your knife

angle during sharpening, with the help of an absolute orientation sensor and bluetooth microcontroller. This project is a collaboration with Alex French Guy
Cooking! This is an intermediate level Arduino project, so…... Listed under: Phone Project Ideas
622. Motorized Window Blinds Controller
For this project you will be creating a device that is capable of opening and closing window blinds, both automatically and
manually (via a push button), based upon a time schedule and sensor data from a light dependent resistor. In addition, this device will be…... Listed under:
Other Projects

623. Arduino Perpetual Calendar Clock

The clock uses 2 electro mechanical clock movements controlled by an Arduino to display the Day and Month. A third quartz
controlled movement displays the time tide Low or High tide. The Calendar is fully automatic and takes into account leap years as well as…... Listed under: Clock
– Timer Projects

624. DIY Word Clock

Today, I will show you how to build a Word Clock. It is basically a clock which displays time using words. I will also show you how to use a Shift Register and RTC
using a microcontroller. Shift Register can come in very handy if you…... Listed under: Clock – Timer Projects

625. Music Reactive Infinite Mirror

Hi fellow makers! This is a project I've been working on for my Makerspace class at Collégial international Sainte-Anne. I truly hope
you will like it! https://youtu.be/rHbPYaLJt_g *I'm sorry about the focus being bad. It was almost impossible to obtain a great focus since the…... Listed under:
Sound – Audio Projects

626. Electronic Chameleon

Ever wondered how the chameleon changes its colour through the changes in environmental colours? There's something called
Melanocyte Stimulating Hormone or MSH. If you want to dig more into this please follow this Link. The stories apart, I wanted to build ambient lighting system
or something…... Listed under: Sensor – Transducer – Detector Projects

627. Automatic Drone Lap Timer – 3D Printed, Arduino Powered.

I've been growing more and more interested in the idea of First Person Video (FPV) drone racing.
I've recently acquired a small drone and wanted a way of timing my laps - this is the resulting project. This drone landing pad features an integrated
ultrasonic…... Listed under: Clock – Timer Projects

628. Reaction Time Meter (Visual, Audio and Touch)

Reaction time is a measure of time a person takes to identify a stimulus and produce a response. For example an
athlete's audio reaction time is time elapsed between firing of gun shot (that starts the race) and him or her starting the race. Reaction…... Listed under: Clock –
Timer Project Ideas

629. Cheap and Simple Arduino Eggbot

In this Instructables I want to show how to make a simple and cheap arduino plotter that can draw on eggs or other spherical
objects. In addition, soon Easter and this homemade will be very handy Step 1: Watch the Video https://youtu.be/cznLDhbVzlk Step 2: Materials…... Listed
under: Other Projects

630. Arduino CNC Drawing Machine (or the Road to Success)

This project is based on mostly items which are easy to find. The idea is to take two unused computer
disk units and combine them to create an automated drawing machine which resembles a CNC machine. The pieces used out of the drives include the…... Listed
under: CNC Machines Projects

631. Fading LED With Arduino Analog Output in Tinkercad

https://youtu.be/X8dHbdhnGKY Let's learn to adjust an LED's brightness using one of the Arduino's analog
outputs. You've probably already learned how to use Arduino's digital i/o pins to send HIGH and LOW signals to an LED, but some of these pins are capable of
simulating a signal…... Listed under: LED Projects

632. Arduino-controlled Water Rockets

You've all probably had a chance to do that classic high-school experiment: pop bottle rockets. You've probably taped on
some fins, a paper nosecone, and presto! You launch a "rocket" that is loads of fun- and watched it fall down from the sky. Why stop…... Listed under: Other
Projects

633. ISS Pointer Robo

https://youtu.be/0kBK3WHNv5Q Hi there, This is my contribution to the Space-Contest. There are some ISS-Pointer around the WWW. Some of
them use several PSUs and/or quite big motors. My goal was to build something cheap, looking cute and a little bit badass - all powered with only one 5 Volt…...
Listed under: Robotics – Automation Projects

634. Motion Activated Stairs

Yes, I know what you're thinking, this does seem a little overkill but first of all, you'll never have to worry about stubbing your toe again
and second, it makes walking up and down your stairs so much fun, i found myself going upstairs for no reason…... Listed under: Other Projects

635. Custom Macro Mechanical Keypad

In this Instructable I will be taking you through the basics of creating your own 6 keyed macropad, controlled by an Arduino. I
will be taking you through what you need, how to assemble it, how to program it, and how to improve it or…... Listed under: Other Projects

636. Yes – No : an Arduino Driven Mailbox

In this project we're going to show you how to make your mailbox more fun and usefull. With this mailbox, if a letter is in
your mail you have a nice light wich shows if you have mail, and you can controll this mailbox with…... Listed under: Other Projects

637. Web-Connected SMART LED Animation Clock With Web-based Control Panel, Time Server Synchronized
The story of this clock goes back a long way - more than
30 years. My father pioneered this idea when I was just 10 years old, long before the LED revolution - back when LED's where 1/1000 the brightness of their 
current blinding brilliance.…... Listed under: LED Projects
638. Convert Your IR Remote to RF Remote
In today's Instructable, I'll show you how you can use a generic RF module without a microcontroller which will eventually
lead us to build a project where you can convert an IR Remote of any device to a RF Remote. The main advantage of converting…... Listed under: LED Projects

639. Test Any MCU Using Only 4 I/O Lines

With this 'Test Fixture' and provided software you can test virtually any MCU with as little as 4 digital I/O lines (even only 2 is
possible, all be it tricky) for project suitability and performance. When I start a new project I don't like hooking…... Listed under: LED Projects

640. Fish Feeder 2

Introduction / Why this project In 2016 I build my first fish feeder, see Fish Feeder 1. The feeder worked fine for more then half a year. After that
period the servos were worn out, causing the program to halt, without sending an error-mail. Oops. I didn’t…... Listed under: Other Projects

641. Kids MP3 Music Box

When looking for some new DIY projects around arduino I found some nice ideas on RFID based MP3 players for Kids. And there is one
great professional toy box on the market - these guys rule. They made a great business out of their smart…... Listed under: Sound – Audio Projects

642. Versatile Volt, Ampere, and Power Meter

Multimeters are suitable for many purposes. But usually, they only measure one value at a time. If we deal with power
measurements, we need two multimeters, one for voltage and the second for Ampere. And if we want to measure efficiency, we need four multimeters.…...
Listed under: Metering – Instrument Project Ideas

643. Building a DIY Arduino on a PCB and Some Tips for Beginners
This is meant as a guide to anyone soldering their own Arduino from a kit, which can be
purchased from A2D Electronics. It contains many tips and tricks in order to build it successfully. You will also learn about what all the different components do.
Read…... Listed under: Other Projects

644. Alexa-Enabled Death Star Lamp

Bring a snippet of the Dark Side to your living room with this unique voice-activated lamp. A functional work of art that is both
useful and pleasing to look at. Switching on or off? All lamps do that! Changing brightness? Very common! But can yours do this? *cue…... Listed under: LED
Projects

645. 10 Useful Arduino Projects to Complete This Year

Whether you are new to the world of DIY electronic problems or an experienced fanatic, you will have heard of
the Arduino. Arduino is the perfect source of microcontrollers; not only are their products reliable, open-source, affordable and efficient, they are also hugely
versatile. The…... Listed under: Projects

646. Arduino Star-Finder for Telescopes

Space is big. Really big. Owning a small telescope can give a lot of pleasure, but it's often a struggle trying to locate specific
objects in the night sky. In this project I made and integrated an Arduino-powered star-finder with a small reflecting telescope, to allow…... Listed under: Solar
energy projects

647. DIY IoT Lamp for Home Automation || ESP8266 Tutorial

In this tutorial we're going to make an internet connected smart lamp. This will go deep into internet of
things and opens up a world of home automation! The lamp is WiFi connected and built to have an open message protocol. This means you can…... Listed
under: LCD Projects

648. LED Cube Display

In this project, you will build an 8x8x8 LED cube as a display. After building the cube and learning the code basics, you will be able to write
your own display animations. It is a great visual for scientific purposes and it will be a…... Listed under: LED Projects

649. NodeMCU Humidity/Temperature Unit

n this tutorial we are going to show you how to setup your own temperature and humidity sensor. We are going to use a
DHT22 unit, which is a low-cost digital output relative humidity and temperature sensor. The device includes a capacative humidity sensor and…... Listed under:
Temperature Measurement Projects

650. Acrylic Fish Feeder

Step 1: Prepare Your Materials For this project, you will need the following materials: For the circuit:3 pieces of Insulated copper wire (22AWG
wire) around 4-6 inches long, stripped on both endsAC/DC AdaptorGWS Mini ServoDouble Side Servo armServo screw (1.7 x 3mm)ArduinoUSB Cable A to…...
Listed under: Other Projects

651. GYRO & VOICE ARDUIGAMES

This gaming box is made from Arduino Uno R3, LoLShield, MPU6050 and Microphone module. With LoLShield, we can show a
message/scrolling message or animation picture like: plasma effect, sinewave effect...With MPU6050, we can read value from accelerometer and gyroscope to
control movement for simple games…... Listed under: Game – Entertainment Projects

652. Convert Your Old Phone to a Remote Switch

Ever wondered what to do with your old basic phones? The advent of a smartphone in last decade made all the
basic phones obsolete. Even though they had good battery life and decent look they are less when compared to big smartphones which have big…... Listed
under: Phone Projects

653. Awful to Awesome: Replace a Mechanical Alarm Sound

Hoping to reduce my late-night smartphone use, I got a vintage alarm clock for next to my bed. This beautiful mec
flip clock has just one problem: a truly horrifying alarm sound. (Witness the first video above.) It’s no wonder what this clock isn’t being…... Listed under: Sound –
Audio Projects

654. How to Build a GPS Guided Robot

Here is a Youtube video of me demonstrating the GPS Guided Robot. You can see that I am holding a cellphone and
controlling the robot. I am at a tennis court and I am setting a Waypoint for the robot to return to. Once I…... Listed under: Robotics – Automation Projects

655. Pocket Metal Locator – Arduino
This cool little Pocket Metal Locator is sensitive enough to identify small nails and tacks in wood and compact enough to fit into
awkward spaces making it convenient to carry and use for metal locating. The unit has four independent search coils and color LED…... Listed under: LED
Projects

656. Training Heart Rate Zone Monitor Watch

https://youtu.be/7oLxJ_725rU College is a hectic and chaotic time in ones life, that is why it is very important to keep
your stress level low. One way we like to do this is by working out, it helps keep your mind clear and body feeling healthy.…... Listed under: Clock – Timer
Projects

657. Rob the Automated Robot

This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida
(www.makecourse.com). In this tutorial you will learn how to make a fully automated robot named Rob who is equipped with sensors that allow it to detect…...
Listed under: Robotics – Automation Projects

658. Infinite Jest

A rotating machine that is controlled by a robotic glove. Neverending fun. Step 1: Concept Our seminar assignment was to design a useless machine.
Thinking about absurd tasks, we were inspired by the greek myth of Sisyphus and the idea of gravitational weight shifting in…... Listed under: Robotics –
Automation Projects

659. Show Winch

For this project, I wanted to create a winch that would be functional for use in a show in a theatre. Often, we have to fly in and out small objects,
like chandeliers. This unit would be ideal for raising and lowering small objects in…... Listed under: Motor Projects

660. DMX Effect Controller

The goal of this project was to make a DMX-Controlled plug box which would allow on-stage effects or devices to be triggered remotely
from the lighting console. This could potentially eliminate the need for a separate control system and operator backstage. This controller could be…... Listed
under: Video – Camera – Imaging Projects

661. Neo Pixel, Fastest Thumb Game.

I built this project because to take to my local Makerfaire In Newcastle, UK. The idea was to make a school yard game that
would be relatively cheap and simple to produce. The idea is simple, to win you have to press the button repeatedly until you…... Listed under: Game –
Entertainment Projects

662. DIY Weighing Machine

In today's Instructable, I'll show you how to build an easy but useful Weighing Machine. It is very sensitive and accurate up to 3 grams.
The maximum weight it can measure is 20 kgs but I'll also show you how you can effortlessly build one…... Listed under: Temperature Measurement Project
Ideas

663. Ultrasonic Range Finder

This instructable describes how to create a non-contact range-finder using an Arduino and an HC-SR04 ultrasonic module to measure
distances in the range 2cm – 400cm. The accuracy is typically +/- 3mm depending on distance, air temperature, and humidity. Step 1: Parts List Very few…...
Listed under: Other Projects

664. Around the World Time Clock

Whether world trotting or just interested in knowing what time it is before making that late night call, a 5 zone world clock fits the
bill. Since I got some extra TM1637 7 digit displays in my latest shipment, I decided to put together a…... Listed under: Clock – Timer Projects

665. Magic Wand Target Practice (IR Arduino Project)

This is how I made my project for Electronic Art. This project was to focus on using an Arduino Uno to make a
wearable. I did not focus so much on the wearable, I more so focused on playing around with an IR sensor and…... Listed under: Other Projects

666. Squirting Scuba Helmet

In this project we will create a timer based water pump scuba helmet that will mist or spray every ten seconds. The original intention of
this project is for the helmet to be used as a wearable garden, however, depending on the nozzels you use…... Listed under: Other Projects

667. HALO: Handy Arduino Lamp Rev1.0 W/NeoPixels

https://youtu.be/byTgKFtpxKo In this instructable, I will be showing you how to build HALO,
or Handy Arduino Lamp Rev1.0. HALO is a simple lamp, powered by Arduino Nano. It has a total footprint of about 2" by 3", and a weighted wood base for
extreme stability. The flexible neck…... Listed under: LCD Projects

668. The Artificial Plant Emotion Expressor (A.P.E.X.)

https://youtu.be/BdaTOp6ieVo Step 1: Introduction What is APEX? APEX is a smart (not to mention cute) plant monitoring d
Just plug it into any plant and it will display the "happiness" level of the plant! This is a great reminder to water your plants if you…... Listed under: Other Projects

669. Automatic Chicken Coop Door – Arduino Controlled.

https://youtu.be/Kdt8fT_kVHE This Instructable is for the design of an automatic chicken door with
manually alterable opening and closing times. The door can be opened or closed remotely at any time. The door is designed to be modular; the frame, door and
controller can be constructed…... Listed under: Other Projects

670. Card Reading Shop Power Switch

This box reads any card with a magnet strip and, if you're on the registered personnel list, turn on the shop power via a relay.
A sole person, to be added to the program file upon creation, has the power to add others to this…... Listed under: Other Projects

671. RGB LED Matrix With an ESP8266

I think these RGB LED Matrix displays are one of best displays you can get for your Arduino projects, they are incredibly bright
and vivid and are actually pretty easy to use too! They can be used for displaying text, images or a combination of…... Listed under: LED Projects

672. Light Up Clock for Kids – Green Means Go! Red, Stay in BED!!!
We were going crazy without enough sleep!!! Our 2-year-old could not understand how to "wait for

the 7" on the clock before coming out of his room morning after morning. He'd wake up early (I mean like 5:27am - "there's a 7!!!" he'd say) and…... Listed under:
Clock – Timer Project Ideas
673. IOT Blink
Anyone who's started learning about microcontrollers and code could tell you that a good place to start is by looking at the most basic example
sketches provided. As often times their simplicity can teach you a lot more than you think. With the Arduino, one…... Listed under: Wifi - WLan Projects

674. Art Deco FM Radio Project Using Arduino

https://youtu.be/kP_S3LuZBGA Dear friends welcome to another Arduino project Instructable! I am very excited
because today I am going to show you how I built this Art Deco style FM Radio project using Arduino. It is by far the most complex project I have ever built
and…... Listed under: Radio Projects

675. TRASH-BOT. (Arduino Auto Open Close Trash Bin)

Everything's getting smarter right? So why not your Trash Bin? This trash bin Opens and Closes its lid if it sees
any Rubbish in front of it. You just need to bring the rubbish to it and it'll open automatically and will wait for you…... Listed under: Other Projects

676. Electric-Analog Piano

Music is a big part of our culture -- everyone enjoys listening to music. But while listening to music is one thing, learning to make music is
another thing. Similarly, while making music is a difficult task, building a musical instrument is a whole new…... Listed under: Sound – Audio Projects

677. Circuito Arduino Controller Pad

"Circuito" is a DIY controlling pad. It is a Supplementary project for my previous Robotic Arm project. The Controlling Pad is a
computer controlled mechanical constructions that help to move and manage any robotic arm depend on servo motors. It can be considered kinetic control
pad…... Listed under: Other Projects

678. LED Ukulele

https://youtu.be/X27byIWzV4s Hi, my name is Elaine. This project combines a lot of things that I enjoy so I hope you enjoy it as well! The LED ukulele
we'll be building teaches you how to play the four most played chords: C, G, Am, and F.…... Listed under: LED Projects

679. Digital Input With a Pushbutton With Arduino in Tinkercad

https://youtu.be/PC15jBx2UxI Let's learn how to read a pushbutton using Arduino's digital input! We'll
connect up a simple circuit using a solderless breadboard and use some simple Arduino code to control a single LED. So far you've learned to control LEDs with
code, which is one use…... Listed under: LED Projects

680. Arduino Pocket Game Console + A-Maze – Maze Game

Welcome to my first instructable! The project I want to share with you today is Arduino maze game,
which became a pocket console as capable as Arduboy and similar Arduino based consoles. It can be flashed with my (or your) future games thanks to
exposed…... Listed under: Game – Entertainment Projects

681. 3D Printed Prosthetic Hand With Capacitive Touch Sensing

In this Instructables I’ve come with an idea that can be implemented to existing 3d printed prosthetic
hands. In existing electrically powered prosthesis I Couldn’t find the use of capacitive touch sensing technology for the actuation of fingers. This project
combines two very cool things, Arduino with Capacitive…... Listed under: Sensor – Transducer – Detector Projects

682. Internet Speed Gauge

https://youtu.be/SG91jSD1xAk Overview This "Internet Speed Gauge" will give you near real time oversight of your network usage. This information is
available on the web interface of most home routers. However, accessing it requires you to stop your current task to go look it up. I…... Listed under: Internet – Ethernet – LAN
Projects

683. Simple Braille Writer (Speech to Braille)

https://youtu.be/y-N4hqFgOtE Hello everyone, All this started with doing a simple XY plotter after completing it
successfully, I thought to develop a simple speech to braille text converter.I started searching it online and unexpectedly the prices were too high,that boosted
me built a small portable and…... Listed under: Other Projects

684. Phone+Arduino Controlled Teddy Ruxpin

In this instructable I will be demonstrating how to control Teddy Ruxpin with a phone and the help of an arduino. After
this modification Teddy Ruxpin will work as Google Assistant(or just about any other virtual assistant) and be able to lip sync voice recordings.…... Listed under:
Phone Projects

685. A Useful Remembrall

If you've ever watched the Harry Potter series, then you would have seen Neville receive a gift from his Gran which was a Remembrall. For
those Muggles who haven't watched it yet or don't remember the scene, a Remembrall is a large marble sized glass…... Listed under: Other Projects

686. Mini CNC Laser Wood Engraver and Laser Paper Cutter.
This is an Instructables on how I made an Arduino based Laser CNC wood engraver and Thin paper
cutter using old DVD drives, 250mW laser. Playing area is 40mm x 40mm max. Isn't it fun making a own machine out of old things? Step 1:…... Listed under: CNC
Machines Projects

687. Anti-Social Glasses

You look up, they tilt down! A tilt switch controls 2 servos which open/ close shutters on a pair of custom glasses. project by Rob Faulkner
and You-Wen Ji Step 1: Parts (1) 30 x 60 cm plastic sheet (We used polystyrene but its up…... Listed under: Other Projects


688. IoT Desktop Console. Part : 11 IoT, Home Automation
Preamble This article, the 11th in a series on home automation documents how to create and integrate an IoT Desktop
Device into an existing home automation system including all the necessary software functionality to enable the successful deployment within a domestic environment. Picture 1
 shows the completed…... Listed under: Home Automation Projects

689. Robotic Arm Controlled by Glove

Purpose: Gain experience, and problem-solving skills by creating a project to complete Outline- Use a glove to connect through
an arduino to control a 3-D robotic printed "arm". Each of the joints on the 3-D printed arm has a servo which connects to the flex…... Listed under: Robotics –
Automation Projects

690. Aerobic Arduino – a $15 Fitness Tracker Power by an Arduino

Please vote for this in the fitness challenge instead of a Fitbit or a smartwatch, you can build an
Arduino powered fitness tracker for only $15! It tracks the pumping motion of your arms while running and uses an accelerometer to detect this. It is…... Listed
under: Security – Safety Projects

691. Arduino Ultra Mega Timers

https://youtu.be/_PL-bci4e0s Hi! "Arduino Timer with on/off setpoint" is my most viewed instructable by far, so i got a lot of
questions in the comments, inbox and youtube, about how to add minutes,seconds, days and save settings on the eeprom.... so i decided to bring an…... Listed
under: Clock – Timer Projects

692. Arduino Energy Meter – V2.0

Hello friend, welcome back after a long break. Earlier I have posted an Instructables on Arduino Energy Meter which was mainly
designed to monitor the power from the solar panel (DC Power) in my village. It became very popular on the internet, lots of people all over…... Listed under:
Metering – Instrument Projects

693. DIY Telematics Box

Telematics boxes (aka Black Boxes) are used to record and log various attributes of a moving vehicle. They have been primarily used in
airplanes to log various attributes of an aircraft, for example, air speed, heading, fuel levels, radio chatter etc. It is the first…... Listed under: Other Projects

694. ArduMeter: an Arduino Based Multimeter (Sort Of)

The ArduMeter is an Arduino Based Multimeter, which many people have made to perform different
operations, and searching on google you could find all the variety of things it can do. I wanted to make one that is portable, quite easy to use, give decent…...
Listed under: Metering – Instrument Projects

695. RC Flight Data Recorder/Black Box

In this instructable I am going to be building a arduino based fight data recorder for RC vehicles, specifically RC aeroplanes. I
am going to be using a UBlox Neo 6m GPS module connected to an arduino pro mini and a SD card shield to…... Listed under: Temperature Measurement
Projects, Video – Camera – Imaging Projects

696. Make an Illuminated Rainbow Synthesizer With an Arduino!

https://youtu.be/MOnr_VLFBWg This Instructable shows you how to add a high-resolution touch
screen to your Arduino and make a synthesizer that controls colored LEDs! The techniques you learn here can serve as a foundation for other touch screen
projects! In this Instructable, you will learn: Where…... Listed under: LED Projects

697. RGB Box Clock

https://youtu.be/7inXakX4XOs This is a clock and decorative RGB Led Matrix It's controlled by a Colorduino Shield and NodeMCU v3 Board using
i2C communication. With Blynk app you can setup the alarm,change colors and other things. Parts list is: LoLin V3 NodeMcu Lua CH340G ESP8266 Board…...
Listed under: Clock – Timer Projects

698. Arduino Lilypad Controlled NeoPixel Earrings

https://youtu.be/7B3Uz_2O9Rw Hello everyone, Don't you want to have such a nice and cool earring when you go
out at night or for parties? I would like to have it, that's why I made Arduino Lilypad Controlled Neopixel Earrings. 🙂 These earrings don't just light up.…... Listed
under: Pinouts

699. Control Your Model Train Layout With Your TV REMOTE!

In this instructable, I will show you how to make an IR remote control system for a model train. You will
then be able to control your trains while relaxing on your couch. So, let's get started! Step 1: Collect All the Stuff! Here is the…... Listed under: Motor Projects

700. TerraDome : Mini Tropical Greenhouse With Arduino

TerraDome is an indoor greenhouse for plants and tropical flowers shaped octagonal dome. It is driven by
an Arduino Mega that regulates temperature and lighting through different sensors and an LCD display. It also has doors to the Jurassic Park (or Jurassic World)
that opens…... Listed under: Temperature Measurement Projects

701. Smartphone / Tab Controlled ROBOT ARM !!

Making ROBOT ARMs is very popular and fun among hobbyists,but it's not that easy to control a ROBOT ARM. So
today we'll be making a robot arm that can be controlled using just your Android Smartphone or tablet. Good news is, you just need to…... Listed under:
Robotics – Automation Projects

702. Riding Through Walls: Google Street View Stationary Bike Interface
The Riding Through Walls: Google Street View Stationary Bike Interface allows you to cycle
through Google Street-View from the comfort of your living room. Using some simple electronics, an Arduino, a stationary bike, a computer, and projector or TV
you can explore the world without…... Listed under: Other Projects

703. NeoPixel Ring Kaleidoscope

I am pleased to offer instructions and material files for making a LightLogo Kaleidoscope! I have been thinking about doing this for
many months and finally worked out a design. If you have any improvements on this design please do share! You will need: Adafruit…... Listed under: Other
Projects

704. Make Your Own 1D Pong Game

For this project I will show you how I combined an MDF board with buzzer buttons, LEDs and an Arduino Nano in order to create
a 1D Pong Game that is really fun to play. Along the way I will show you how to create…... Listed under: Game – Entertainment Projects

705. DIY ACRYLIC INDIGO BUTTERFLY LAMP.

The Indigo Butterflies looks so awesome, Aren't they? Colors, Colors, Everywhere. Some are here, and some are there.

Mood Lighting to be Happy, Relaxed, or Focused. In this Instructable I’ll show you how I build an Acrylic LED Lamp with WS2812B addressable RGB LEDs, Acrylic
Cylinder with…... Listed under: LED Projects
706. Arduino Serial Monitor in Tinkercad
Keeping track of everything going on in your program can be an uphill battle. The serial monitor is a way to listen to what's
going on in your code by reporting back to the computer over the USB cable. In the Tinkercad Circuits simulator, the Serial Monitor…... Listed under: Other
Projects

707. Arduino Word Clock Mini

Arduino Word Clock Mini- Anniversary Clock Relatively easy to build Word Clock using a Arduino Nano and four MAX7219 32mm Dot
Matrix Display ModulesChoice of styles, picture frame or Perspex cube with various base options. Specs Mini Arduino Word Clock with minute resolution of
time…... Listed under: Clock – Timer Projects

708. Virtual Reality Flying Machine (Arduino)

This project goes through converting a hammock into a VR flying machine. We will use a VR app that is running the
WRLD SDK in Unity so you can input whatever GPS coordinates you want and fly around that area in VR! This VR app…... Listed under: GPS Based Projects

709. OLED Tutorial | Convert SPI to I2C

In this tutorial, we are going to learn about OLED displays. Which can be very easily interfaced with Arduino and can display
important parameters for your project, and see how to convert these screens from SPI to I2C, So let's get started! Step 1: Watch…... Listed under: LED Projects

710. Arduino Robot Arm

Arduino robot arms are among the most popular DIY projects. We decided to make ours out of recycled materials we found in our
workshop. We hope you enjoy this build. https://youtu.be/T6Tffi3uX2w Step 1: E
​ lectronics Main components Arduino UNO3 SparkFun Servos (Generic Metal
Gear) PS2 Joystick…... Listed under: Robotics – Automation Projects

711. Arduino-based LED “Bloody Red” Automatic Stairs

WHAT? Hi! I've made bleeding LED stairs! It's a new Instructables leveraging some hardware installation I had done already
from a previous I'ble from mine. I made a RED animation that resembles blood drops, perfect to be activated automatic during those trick or treat moments!…... Listed under:
LED Projects

712. Jump Sensitive Neopixel Trampoline

In this instructable, I will show you how to build a trampoline that changes colors whenever you jump on it!
https://youtu.be/k_8mHe4OKWg Step 1: The Things You Need Materials: 3 rolls of wire, different colors, the thinner the betterSolder, the thinner the better - I
had…... Listed under: Other Projects

713. Dual Sensor Echo Locator

This instructable explains how to pinpoint the location of an object using an Arduino, two ultrasonic sensors, and Heron’s formula for
triangles. There are no moving parts. Heron’s formula allows you to calculate the area of any triangle for which all sides are known. Once…... Listed under:
Sensor – Transducer – Detector Projects

714. (almost) Universal MIDI SysEx CC Programmer (and Sequencer…)

In the mid eighties synths manufaturers started a "less is better" process that led to barebones
synths. This allowed the reduction of costs on the manufaturer side, but made the patching process tediuos if not impossible for the final user. Manufacturers
themselfs and third party…... Listed under: Arduino Programmer Projects

715. IPad Play Timer

I think this is a topic every parent is struggling with. How much can the kids play with their iPads (or any other tablet). We tried multiple
approaches, like fixed times, but that did not really work as our kid then always wanted to go home…... Listed under: Clock – Timer Projects

716. IoT Hydroponics – Using IBM’s Watson for PH and EC Measurements

This instructable will show how to monitor EC, pH, and temperature of a hydroponics setup
and upload the data to IBM's Watson service.Watson is free to get started with. There are paid plans, but the free plan is more than enough for this project.
Step…... Listed under: Other Projects

717. DIY Miniature Solar Tracker

In this project I will show you how to create a solar tracker which like the name implies can follow the movement of the sun
throughout the day. And at the end I will show you the energy harvest difference between a solar tracker mounted…... Listed under: Solar energy projects

718. Infinity Mirror With Ultra Sonic Sensors

This was my project for Hack Sioux Falls. I built it one weekend and it turned out a lot different than I thought it would. It
was a lot of fun and there are a lot of variations on what you could have the Arduino…... Listed under: Sensor – Transducer – Detector Projects

719. Unicorn Horn With NeoPixel LEDs & Arduino Lilypad

Today I'm gonna make 3D Printed Unicorn Horn. I saw and did the project in Adafruit's website about a
year ago but I could not find an opportunity to share it. It looks great when going out to the party and especially in the evenings.…... Listed under: LED Projects

720. DIY Li-ion Capacity Tester !

When it comes to building the battery packs, Li-ion cells are one of the best choices without the doubt. But if you get them from old
laptop batteries then you might want to do a capacity test before building the battery pack. So today I…... Listed under: Battery Projects

721. ESP8266 Temperature Controlled Relay

A friend of mine is a scientist who does experiments that are very sensitive to air temperature and humidity. The
incubator room has a small ceramic heater but the heater's thermostat was not nearly accurate enough, only able to maintain the temperature within 10-15
degrees.…... Listed under: Temperature Measurement Projects

722. ESP8266 LED Matrix Clock
ESP8266 LED Matrix Clock Simple LED matrix Clock based on the popular ESP8266 with Real Time Clock module and time
synchronization over WiFi from an NTP server. NEW ! ESP32 version also available Step 1: Parts and Tools First let's see what we need. Parts: 6 x…... Listed
under: Clock – Timer Projects

723. Morphing Digital Clock

A quick video about this project. I have since implemented a way to set timezone. Thanks to the work of the Arduino and ESP8266
community, this cool clock is a surprisingly easy to build! https://youtu.be/i0M6F4wRxGc Just two main components: Display (obviously) and a WiFi
MicroControllerNo…... Listed under: Clock – Timer Projects

724. NeoMatrix 8×8 Word Clock

Are you fascinated with the passage of time? Do you want a stylish, modern and functional timepiece to add to your clock collection?
The word clock is a one-of-a-kind time telling device, using a grid of letters to spell out the time. While you could…... Listed under: Clock – Timer Projects

725. ROOM MAPPING Arduino Robot With Unity 3D

This project uses an Arduino robot running a ESP-8266 Node MCU that communicates (and drives around) with a mobile phone.
The phone is running an app made in the video game engine Unity 3D that does 3 things: 1.) The first scene allows you to…... Listed under: Robotics –
Automation Projects

726. Noise Traffic Light – DIY 3D Printed

All people want to work in silence and It’s important to have a good working environment. The silence leads to an efficient
work. We did this project to reach this proposal. The noise traffic light consists of a ‘traffic light’ which controls the dB of…... Listed under: Other Projects

727. How Rotary Encoder Works With Arduino!

A rotary encoder is a great input device for any project such as a 3D printer's menu. So in this tutorial, we will learn
how a rotary encoder works and how to use it with Arduino. So let's get Started! Step 1: Watch the Video…... Listed under: Other Projects

728. Bluetooth Controlled Robot Car

were you always fascinated by RC cars ? Ever wanted to make one yourself ? controlled by your own smartphone ? ----> lets start
https://youtu.be/iETSrpiCAn0 So, hey guys, here in this project i have tried to make a Bluetooth controlled car with the help of…... Listed under: Bluetooth
Projects

729. Low-Poly Iron Man With Wifi-Controlled LED Strips

This interactive wall art piece is approximately 39" tall and 24" wide. I laser cut the wood at Clemson
University's Student Makerspace, then I hand-painted all the triangles and installed the lights on the back of it. This instructable will walk through how I
made…... Listed under: LED Projects

730. Binary LED Marble Clock

Now I think just about everybody has a binary clock and here's my version. What I enjoyed was that this project combined some
woodwork, programming, learning, electronics and perhaps just a little artistic creativity. It shows time, month, date, day of week, temperature and humidity…...
Listed under: Clock – Timer Projects

731. Giant Retro Gamepad

So we decided to make a giant working gamepad... ¯\_(ツ)_/¯ The basic idea was to use up some scrap wood and add some inexpensive
electronics to make it functional while keeping the overall costs low. I already had most of the materials lying around my…... Listed under: Game –
Entertainment Projects

732. Study Better With a Smart Desk Lamp – IDC2018IOT

People in the western world spend a lot of time sitting. At the desk, driving around, watching TV and more.
Sometimes, sitting too much can harm your body and harm your focusing abilities. Walking and standing up after a given time is crucial to perform…... Listed
under: LED Projects

733. Retro Arcade Clock – Arduino

Build an interactive arcade bedside clock, with a touchscreen, and animated arcade figures that you can record a sound of your
choice for the alarm. This is an update of a previous project which now includes a 3D Printed Case and four separate programs to…... Listed under: Clock –
Timer Projects

734. DIY Smart Scale With Alarm Clock (with Wi-Fi, ESP8266, Arduino IDE and Adafruit.io)
In my previous project, I developed a smart bathroom scale with Wi-Fi. It can
measure user's weight, display it locally and send it to the cloud. You can get more details about this on link below: https://www.instructables.com/id/Wi-Fi-
Smart-Scale-with-ESP8266-Arduino-IDE-Adafrui/ This solved part of my problems: how to…... Listed under: Clock – Timer Projects

735. ARDUINO BASED OIL DISPENSER

we all love food isn't that right? of course yes, everyone has tried cooking once in their life, and already knows the struggle to
get exact amount of oil for the perfect recipe, so here is a project which will help you get it correct, follow the…... Listed under: Other Projects

736. How to Make a Digital Watch

This is the first time I am writing an Instructable so hopefully I write well enough for you to understand. Today I will be telling you
how to make a digital watch from a website that I found. The website is called sainsmart.com. It was…... Listed under: Clock – Timer Projects

737. PIR Motion Sensor With Arduino in Tinkercad

Let's learn to sense movement in a room with a PIR motion sensor and Arduino's digital input. We'll connect up a
circuit using a breadboard and use some simple Arduino code to control a single LED. We'll use Tinkercad Circuits to simulate the circuit so…... Listed under:
Sensor – Transducer – Detector Projects

738. 80s Style Melting Digital “Dali” Clock

This Instructable shows you how to build an 80s style digital "dali" clock with melting digits. I first came across this style of
clock on the Apple Macintosh back when I was a kid in the 80s. This Instructable shows my attempt to recreate the…... Listed under: Clock – Timer Projects


739. DIY Wave Tank/flume Using Arduino and V-slot
A wave tank is a laboratory setup for observing the behavior of surface waves. The typical wave tank is a box
filled with liquid, usually water, leaving open or air-filled space on top. At one end of the tank an actuator generates waves; the other…... Listed under: Other
Projects

740. IoT Split-flap Weather Forecast Powered by XOD

Hi everyone! In this instructable, I tell you how to make split-flap display and show the current weather
conditions on it. Also how to fetch the weather information from the Web using Wi-Fi and API. I am a fan of the XOD visual programming environment. With…...
Listed under: Other Projects

741. Lightpipe 7-Segment Display

What if I told you that you could build a display out of shoe laces!? Well that is exactly what I've done! Building your own seven
segment display is nothing new, it's a very common Arduino project, but I had an idea for this one…... Listed under: LED Projects

742. Light Sensor (Photoresistor) With Arduino in Tinkercad

Let's learn how to read a photoresistor, a light-sensitive type of variable resistor, using Arduino's Analog
Input. It's also called an LDR (light-dependent resistor). So far you've already learned to control LEDs with Arduino's analog output, and to read a potentiometer,
which is another type of variable…... Listed under: Sensor – Transducer – Detector Projects

743. ITTT – Sunlight Simulating Lightbox

I made a Sunlight simulating lightbox with a mountain village skyline, that I might upgrade to a wake-up light some time, for
a school project. Step 1: Get the Supplies Supplies I used: -Arduino UNO -Neopixel ledstrip 1m, 30 leds(DC5V-W2812) -3 jumper wires -USB cable…... Listed
under: LED Projects

744. *IMPROVED* Smart LED Candle: Reactive to Sound and Aesthetically Pleasing
Remember the "smart" LED candle from a few months ago? Well, the idea was
nice, but the overall execution lacked some oomph. Technologically and aesthetically speaking there was a lot to improve. First off, as an artist, I wanted the
container for the candle to look amazing.…... Listed under: Sound – Audio Projects

745. An LED You Can Blow Out Like a Candle!

LEDs are designed to emit light, but they also make surprisingly capable sensors. Using only an Arduino UNO, an LED
and a resistor, we will build a hot LED anemometer that measures wind speed, and turns off the LED for 2 seconds when it detects…... Listed under: LED
Projects

746. Biometric Personal Diary

This neat little gadget has a fingerprint sensor so you can secure your cool stuff in a personalised portable case. I use to hold a diary
and pen and designs for my new projects. Features a 3d printed case and uses an Arduino nano. Great…... Listed under: Other Projects

747. TMP36 Temperature Sensor With Arduino in Tinkercad

In this project, you will turn the Arduino into a thermometer! Use a temperature sensor to measure your
skin temperature, and register the output with three LEDs. Even though the Arduino is a digital tool, it can interpret signals from an analog input, like the…...
Listed under: Temperature Measurement Projects

748. DIY Adjustable Constant Load (Current & Power)

In this project I will show you how I combined an Arduino Nano, a current sensor, an LCD, a rotary encoder and
a couple of other complementary components in order to create an adjustable constant load. It features a constant current and power mode and…... Listed
under: Other Projects

749. Arduino Arcade Lego Games Box

If you have kids, you are likely facing the same issues as we did with the Lego sets you bought for them. They assemble and
play with them but after a while the sets transform into a single pile of bricks. The kids grow up…... Listed under: Game – Entertainment Projects

750. Ultrasonic Distance Sensor in Arduino With Tinkercad

Let's measure distances with an ultrasonic rangefinder (distance sensor) and Arduino's digital input. We'll
connect up a circuit using a breadboard and use some simple Arduino code to control a single LED. You may have already learned to read a pushbutton and PIR
motion sensor with Arduino's digital input,…... Listed under: Sensor – Transducer – Detector Projects

751. DIY Electronic Locker Using Fingerprint Sensor

Bored of keeping track of countless locks and their keys? How about using your own fingerprint to unlock each
and every safe in your house, just like your Smartphone? Sounds cool, right? Let's make an electronic Fingerprint locker that will keep all your secrets a…...
Listed under: Security – Safety Projects

752. Measuring Time Period of a Pendulum Using IR Sensor

Calculating on paper is never an easy job. And when it comes to formulas with sub-formulas of their
own, it is nothing short of a nightmare! Take the case of a simple pendulum, which has a variable with a formula of its own. What if…... Listed under: Sensor –
Transducer – Detector Projects

753. Arduino Robotic Bartender – 3D Printable & Bluetooth

Build yourself a low-cost easy to assemble bluetooth controllable robotic bartender using an Arduino
Uno. This easy Arduino based project can be 3D printed and is a cool Arduino project for beginners. The aim of this project was to create a bar robot that
was…... Listed under: Robotics – Automation Projects

754. UltraV: a Portable UV-index Meter

Being unable to expose myself to the sun due to a dermatological problem, I used the time I would have spent on the beach to build an
ultraviolet rays meter. UltraV. It is built on an Arduino Nano rev3, with an UV sensor, a DC/DC…... Listed under: Metering – Instrument Projects


755. LED Dancing Robots
I wanted to make something so I could find our camp at night at Burning Man 2018. 2018 was a robot theme and I'm a fan of neon but no
way was gonna head that route so I came up with an idea about a…... Listed under: Robotics – Automation Projects
756. Spatial Synthesizer Kravox! Wireless, Motion- & Touch-Sensing
A New Kind of InstrumentI invented Kravox during a research project at Lund University (Sweden)
with the aim to give digital musical instrument controllers the feeling of conventional, mechanical instruments. Now I want to make Kravox accessible as a
musical experimentation platform for everyone, so…... Listed under: Wireless Projects

757. WiFi Smart Power Strip With NodeMCU

This is an easy-to-do and quite cheap WiFi Smart Strip that can control 4 sockets independently from all around the
world from your smartphone, tablet or computer. Everything you need is an internet connection. You can use it for christmas lights, or fan or everything…...
Listed under: Wifi - WLan Projects

758. Arduino LCD Stick Man Game!

hey there Electronic Enthusiasts! Kids, Adults, Seniors, in fact everyone loves games! so here is another Awesome Project based
on Arduino, yes its a GAME, follow this pretty INSTRUCTABLE to make your own Arduino LCD Stick Man Game! Step 1: Watch the Video!
https://youtu.be/P97DJQUtKKU Step 2: Gather…... Listed under: LCD Projects

759. Talking Baymax Display for a Pediatrician’s Office

“Hello. I am Baymax, your personal healthcare companion.” - Baymax At my local pediatrician's office, they
have adopted an interesting strategy in an attempt to make the medical environment less stressful and more fun for kids. They have filled the entire office with
movie posters…... Listed under: Sound – Audio Projects

760. How to Install LEDs Under a Scooter (with Bluetooth)

Join me in creating ground effect lighting for my scooter using a bluetooth microcontroller and
addressable LED strip. For this project I'm recycling two bits of pixel strip leftover from my old POV bike project tutorial. These are APA102s or DotStars, but you
could totally…... Listed under: LED Projects

761. Hearing Impaired Doorbell Room Light Hack

Problem: my dad is registered as deaf and my mum is hearing impaired and due to this they often find it difficult to
hear the doorbell. This could be a problem suffered by many others as well. They bought a flashing light doorbell to help…... Listed under: Sound – Audio
Projects

762. Meet Twinky the Cutest Arduino Robot

Hi,In this instructable I'm going to teach you how I made my own "Jibo" but called "Twinky" I want to clear this up... THIS
IS NOT A COPY! I WAS BUILDING TWINKY AND THEN I REALIZED THAT SOMETHING LIKE THIS ALREADY EXIST :c It has…... Listed under: Robotics – Automation
Projects

763. Animated Spooky Pumpkin Eyes

A couple of years ago while looking for inspiration for a new animated Halloween prop we stumbled upon a video
from YouTube contributor 68percentwater called Arduino Servo Pumpkin. This video was exactly what we were looking for, however, some of the details
seemed to be missing. So, we decided we…... Listed under: Other Projects

764. Autostat : a Remote Thermostat

The question you are probably asking is "why are you making another remote thermostat?" The answer to that question is, I
had to, and the market smart thermostats are too expensive. Fair warning, this is "proof-of-concept" build that would require a few extra outputs to actually
control…... Listed under: Other Projects

765. Morse Code for Kids.

Morse code unit for kids. Variable speed and different levels. My son goes to CUBS and has a special event coming up. This event is all
about communicating with other Scouts/Cubs from around the world? Via radio, also over the weekend there will be other…... Listed under: Game –
Entertainment Projects

766. Model Railway Layout With Automated Siding

Making model train layouts is a great hobby, automating it will make it a lot better! Let us take a look at some of
the advantages of its automation: Low-cost operation: The whole layout is controlled by an Arduino microcontroller, using an L298N motor driver, their…...
Listed under: Game – Entertainment Projects

767. ESP32 Xiaomi Hack – Get Data Wirelessly

Dear friends welcome to another Instructable! Today we are going to learn how to get the data that this Xiaomi
Temperature and Humidity monitor transmits using the Bluetooth functionality of the ESP32 board. As you can see, I am using an ESP32 board and a 2.8”
color…... Listed under: Wireless Projects

768. Dropping Spider on Doorbell – Halloween Scare Prank

This Halloween my son Max, came up with the idea to drop a spider on anyone who tries to ring our doorbell... I
immediately jumped on the idea and we started to work on it. Using a simple ultrasonic distance sensor (HC-SR04) and a servo…... Listed under: Sound – Audio
Projects

769. Screaming Necronomicon

"Alright you Primitive Screwheads, listen up! You see this?" - Ash, Army of Darkness Each time an unsuspecting victim lifts the cover
this disgusting book, a bloodcurdling scream pierces the air. This project uses an Arduino Uno, a light sensor and an MP3 player to bring…... Listed under: Other
Projects

770. Realistic LED Candle

If you've even seen a fake candle you have probably noticed how it doesn't look realistic. Whether you're trying to add some atmosphere to
a dinner or light up a jack'o-lantern, your choices are limited. A real candle has a fire hazard, but a fake…... Listed under: LED Projects

771. D.I.Y SMART RGB MATRIX 8×16

In this project, I’ll show you how to make your own 8×16 RGB LED Matrix using Arduino Uno/ Nano. An LED Matrix can show

scrolling messages, display animations, music spectrum analyzer … With integrating NodeMCU, it can be used as small screen to show weather…... Listed under:
LED Projects
772. Frankenbot With Sound Effects and Lights
I was inspired by the cute Frankenbot papercraft, so I thought why not make it truly alive by giving it some blinking
lights and sounds effect. Here is the plan: - Connect 2 LEDs for the eyes (different colours of course) and only one eye…... Listed under: Sound – Audio Projects

773. How to Use the RPLIDAR 360° Laser Scanner With Arduino
I'm a big fan of building sumo robots and I'm always on the look for new interesting sensors and
materials to use to build a better, faster, smarter robot. I found out about the RPLIDAR A1 which you can get for $99 at DFROBOT.com . I said…... Listed under:
Other Projects

774. Bucky Touch: Light-up Dodecahedron Instrument

About two years ago, I built a big 120 face LED geodesic dome that plays music with a MIDI output. However, it
was a difficult build and the sensors weren't completely reliable. I decided to build the Bucky Touch, a smaller version of my geodesic dome that…... Listed
under: Development Board – Kits Projects

775. Charlieplexing Made Easy (and What It Even Means?!)

Charlieplexing. Aside from being a fancy word it is a technique for driving multiple LEDs with relatively few
pins on a microcontroller. It allows you to drive N*(N-1) LEDs with just N pins without requiring any additional hardware, making it a quick, cheap and easy…...
Listed under: LED Projects

776. OLED I2C DISPLAY WITH ARDUINO Tutorial

Hello there! Fellow electronics enthusiasts, I am quite sure we all make some or other projects, as a part of our
learning experience or academics. We sure would want to display some data present on our micro-controllers, from sensors or simply display some message,
so here…... Listed under: LED Projects

777. Spooky Teddy – Arduino Powered Self-rocking Chair & Rotating Head
Spooky teddy is a 2-part Halloween decor. The first part is the teddy bear that has a 3d
printed mechanism that can rotate with an Arduino UNO and a solenoid. The second part is a self-rocking chair powered by an Arduino nano and a solenoid…...
Listed under: Game – Entertainment Projects

778. Animated Chocolate Box (with Arduino Uno)

Once I saw a beautiful box of chocolate in a store. And the thought occurred to me to make an awesome gift out of
this box - an animated box with chocolate. What we need: Сlear plastic chocolate box9V batteryBattery cable adapteruSD 1GBArduino UnoTFT Shield…... Listed
under: Other Projects

779. 3 Simple Ways of Programming an ESP8266 12X Module

If you are not familiar with ESP8266 micro controller, I really feel you have been missing out! These
things are incredible: they are cheap, powerful and best of all have built-in WiFi! ESP8266 started their journey out as a WiFi add on board for more…... Listed
under: Arduino Programmer Projects

780. Candy Claw Machine – Arduino Based Arcade Game

Eyes on the prize, Violet. Eyes on the prize! Get ready for a candy-grabbing face-off with your family and
friends with this classic arcade game - the candy claw machine! But this time, it’s going to be a bit different - first, it’s going to…... Listed under: Game –
Entertainment Projects

781. Remote Color Controlled Jack-o-Lantern

As usual, this Halloween I decided to create a project related to the season. Using Prusa I3 and Thingiverse, I printed a
Halloween decoration where the color is controlled remotely through the Blynk project. https://youtu.be/CpKM5cp7RmI The Blynk project lets you create a
mobile or tablet…... Listed under: Robotics – Automation Project Ideas

782. Arduino Zener Diode Tester

Zener Diode Tester is controlled by Arduino Nano. Tester measure breakdown Zener voltage for diodes from 1.8V to 48V. Dissipation power of
measured diodes could be from 250mW to a few Watts. Measuring is simple, just connect diode and press button START. Arduino Nano gradually…... Listed under: Other Projects

783. Arduino Weathercloud Weather Station

I made a weather station connected to internet. It measures temperature, humidity, pressure, rainfall, wind speed, UV
index and it calculates few more important meteorological values. It then sends this data to weathercloud.net, which has nice graphics and UX. It also has a
weather webcamera. It…... Listed under: Other Projects

784. Automated Train Reverse Loop Using Arduino

Making reverse loops can help in model train layouts to change the direction of trains, which cannot be done with
turntables. In this way, you can create single-track layouts with a reverse loop on each end to run trains without any pause or interruption. So,…... Listed under:
Motor Projects

785. Mug-O-Matic: a Modular Tiny CNC Drawing Robot!

Mug-O-Matic is a one of a kind DIY toy, a real 3-axis Tiny CNC drawing robot that can customize coffee mugs!
This capable little robot can draw anything you want via manual control, bluetooth, calculated algorithms, or even g-code. So you can enjoy your custom
mug…... Listed under: Robotics – Automation Project Ideas

786. How to Make an Arduino Radar

This is a radar, designed to detect the distance and direction an object is from the ultrasonic sensor. With the ultrasonic sensor
connected to a servo, it has the ability to rotate 180 degress, similar to a radar utilised to detect the position of planes.…... Listed under: Other Projects

787. Arduino – Piano Tiles

Hello internet people, This is gonna be about how to make what DEFINITELY isn't a rip off of a mobile game on an arduino uno r3. so to
start, your gonna need all the parts, which are as follows!1x Arduino Uno r3 ($42) 2x LCD Keypad Shield ($19 each) 5x buttons…... Listed under: Sound – Audio
Projects

788. Wireless Music Reactive Floor Lamps

In this instructable we'll be making some centrally controlled wireless RGB lamps, that responds to music and sounds in
the environment! In addition to instructions, the instructable contains: SchematicsList of componentsLink to the code so you can make and modify your own
project Step 1:…... Listed under: Wireless Projects

789. 
Shoe-Mounted Running Distance Tracker
Since runners often need to track not only their total mileage, but also the distance run on each pair of shoes (in order
to know when to replace them), this project seeks a solution to the problem of how to keep track of these numbers.…... Listed under: GPS Based Projects
790. Interactive Cylindrical Cube
This is a creative cylindrical LED cube with proximity sensing by infrared led and photo-transistors. Interactive Cylindrical Cube
includes: 8X8 royal blue LEDs, 12 infrared LEDs, 16 photo-transistors and all of them are bent & formed a cylindrical shape. Please see video below when this…...
Listed under: LED Projects

791. Mini Acoustic Levitation

View this project on my website to see a circuit simulation and a video! Acoustic levitation is made possible through the fact that sound
behaves as a wave. When two sound waves intersect each other, they can either constructively or destructively interfere with each other. (This is…... Listed
under: Sound – Audio Projects

792. DIY Floor Cleaning Robot Using Arduino

While cleaning, getting to those nasty little unreachable spaces under the beds, tables, and sofas can be a big pain.
Though small but smart vacuum cleaners are now out there, who wants to spend more than 500 bucks on them when you can make one…... Listed under:
Robotics – Automation Project Ideas

793. Arduino Energy Cost Electrical Meter Device

Do you pay too much for your electricity bills? Do you want to know how much electricity your kettle or heater
consumes? Make your own portable Energy Cost Electrical Meter! Watch how I found the use of this device. Step 1: Preparation. Tools Screws and…... Listed
under: Metering – Instrument Project Ideas

794. Robotic E-textile

Hello! My name is Fiberbot, and I am so happy you are going to be making more of my friends. In this instructables you will learn exactly how to
make a robot that looks just like me. I will also let you in on a…... Listed under: Robotics – Automation Project Ideas

795. Hey Pillow IoT Alarm

Know someone that constantly struggle to get out of bed, comes late to work and you are just want to give them a nudge in the morning.
Now you can make your own Hey Pillow. Inside the pillow is embedded with an annoying piezo buzzer…... Listed under: Clock – Timer Project Ideas

796. Tchaibotsky (a Piano Playing Robot)

This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida
(www.makecourse.com) Tchaibotsky is an Arduino powered piano playing robot. The motivation was to build something that could accompany pianists, whether
they're missing an arm and can't…... Listed under: Robotics – Automation Project Ideas

797. Internet Radio Using an ESP32

Dear friends welcome to another Instructable! Today we are going to build an Internet Radio device with a big 3.5” display using
an inexpensive ESP32 board. Believe it or not, we can now build an Internet Radio in less than 10 minutes and with less than 30$.…... Listed under: Radio
Projects

798. Control Your Model Train Layout With Your Mobile Phone!
Controlling a model train layout with a wired throttle and turnout controllers might be a good start
for beginners but they pose a problem of non-portability. Also, the wireless controllers which come in the market can either control only some locomotives or
are a bit…... Listed under: Phone Projects

799. Ultrasound Sensor: 2D Tracking With Arduino

Ultrasound ranging is a complicated task that made easy by the readily available module for Arduino. To detect or
measure the distance it transmits the signal to the target and target reflects that back. Arduino measure time is taken for complete travel. As the speed…...
Listed under: Sensor – Transducer – Detector Projects

800. Scrolling Text Display (A to Z Guide)

In this instructable / video I will guide you with step by step instructions how to make scrolling text display with Arduino.I
won't be explaining how to make code for Arduino, I will show you how to use existing code. What and where you need…... Listed under: LED Projects

1
2
3
…
5
6
Next